diff --git a/README.md b/README.md new file mode 100644 index 0000000000000000000000000000000000000000..6b99ccaa3c95e304c4da77794979a75d82b4bd59 --- /dev/null +++ b/README.md @@ -0,0 +1,38 @@ +# Shaft Dataset (70/30 single vs multi-image) + +Tento dataset vznikl automaticky z generovaných výkresů hřídelí. + +- **Počet záznamů (po spárování)**: 5000 + +- **Obrázky**: + + - `images/Shaft_XXXXX.png` — celý výkres (export přes Inkscape) + + - `detail_png/Shaft_XXXXX_length.png` — výřez délkových kót + + - `detail_png/Shaft_XXXXX_diam.png` — výřez průměrových kót + + - `detail_png/Shaft_XXXXX_title.png` — výřez popisového pole + +- **Mix**: cca 70 % má 1 obrázek, cca 30 % má 4 obrázky + + +## Formát JSONL + +Každý řádek: + +```json +{ + "id": "Shaft_01234", + "images": ["images/Shaft_01234.png"], + "conversations": [ + {"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, + {"from": "assistant", "value": "1. ...\n2. ..."} + ] +} +``` + +## Split +- train: 89% +- val: 5% +- test: 5% \ No newline at end of file diff --git a/detail_png/Shaft_00001_diam.png b/detail_png/Shaft_00001_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c3ccff73950901422c935d7a5ad8d5533186129a --- /dev/null +++ b/detail_png/Shaft_00001_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19cf1d5b4d952f47e203babbed8803f87220d127f0dc9278b4639a1fb5d71930 +size 27139 diff --git a/detail_png/Shaft_00001_length.png b/detail_png/Shaft_00001_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c649edd6cbe8ac768bc25feae724dc3187d4df26 --- /dev/null +++ b/detail_png/Shaft_00001_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd9ffad347330463520907165e251ce2d36339c26ab763ca4a8b36a172312d94 +size 33872 diff --git a/detail_png/Shaft_00001_title.png b/detail_png/Shaft_00001_title.png new file mode 100644 index 0000000000000000000000000000000000000000..82ee692834ca9a1408f831530b90d7166fb4e809 --- /dev/null +++ b/detail_png/Shaft_00001_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c07c645c6566ce6f5f6e650684b6e277bdf955a24739e02a3ec9f1eb82ae383f +size 29516 diff --git a/detail_png/Shaft_00002_diam.png b/detail_png/Shaft_00002_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a49a71409ee2b8351545df08dc8dcc072652cb36 --- /dev/null +++ b/detail_png/Shaft_00002_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e84b5247977c97f67e18e430a0189c4bd14e159a9500177d3397c4cdcbb889f0 +size 29977 diff --git a/detail_png/Shaft_00002_length.png b/detail_png/Shaft_00002_length.png new file mode 100644 index 0000000000000000000000000000000000000000..96f9e0e9112c0551889080c074f574bd721894c8 --- /dev/null +++ b/detail_png/Shaft_00002_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9508eec2cb8ec542e4bcd65e4c944549c8459f8111954bc5dab1aa538389e50 +size 43699 diff --git a/detail_png/Shaft_00002_title.png b/detail_png/Shaft_00002_title.png new file mode 100644 index 0000000000000000000000000000000000000000..98ef39c4f5eae1c3ecc2bcd444ab189252c0ba1c --- /dev/null +++ b/detail_png/Shaft_00002_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66d52a2e057210adecb21b01e118096faa8dde59512a018f64eabb75472e6b34 +size 33640 diff --git a/detail_png/Shaft_00003_diam.png b/detail_png/Shaft_00003_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9b0d1d5bc97bf1df8cdcc093ae6a78c2c51b3cf2 --- /dev/null +++ b/detail_png/Shaft_00003_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79f8e34ed7fc1d98525965acdae7679cfba132ade6c04b56e4fa2568899da6c3 +size 19799 diff --git a/detail_png/Shaft_00003_length.png b/detail_png/Shaft_00003_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a04a7dfe2851bd0259d285e1143598eb66a64f1b --- /dev/null +++ b/detail_png/Shaft_00003_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c208a0c992d30ff0454194855e390a9104573513be6b4f272f76f0ad933e457 +size 17455 diff --git a/detail_png/Shaft_00003_title.png b/detail_png/Shaft_00003_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8daa7063a3f0d9d79131ef72ed5466e0de8b196c --- /dev/null +++ b/detail_png/Shaft_00003_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45f793351b7cb13870ac86273596528bc48c1dd5d883320572a6c9fb256e99b4 +size 22063 diff --git a/detail_png/Shaft_00007_diam.png b/detail_png/Shaft_00007_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e63a75156410588aeaac71eae09c38562f6f4bc5 --- /dev/null +++ b/detail_png/Shaft_00007_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5beb19fb452d020ebb9040c4e65cc8a77a4de8ec42a2d8561581df84f02a6f32 +size 17820 diff --git a/detail_png/Shaft_00007_length.png b/detail_png/Shaft_00007_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f0bce29cab44e6146161280ce89139d111a54002 --- /dev/null +++ b/detail_png/Shaft_00007_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1bda7d13e799efc05ab7ff8cb73c7f9fa3894ae59bcdf593ebd2aa7c489a78f +size 15081 diff --git a/detail_png/Shaft_00007_title.png b/detail_png/Shaft_00007_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c9ea85bed1ed875709937fbf2faae55c5450053 --- /dev/null +++ b/detail_png/Shaft_00007_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bdaf79c8afe5ad6b290f9ed1f30e47400e4cf9042a98a124c71532ee9f21244 +size 18859 diff --git a/detail_png/Shaft_00009_diam.png b/detail_png/Shaft_00009_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..44b709f292485cd3542165a86d7293dafff9fc5a --- /dev/null +++ b/detail_png/Shaft_00009_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17c3f88a24edbc9ceab0ac0bb734732337c1837ecb43b8082c18fdcbb1728084 +size 57042 diff --git a/detail_png/Shaft_00009_length.png b/detail_png/Shaft_00009_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d58bb9f0ff8b9b742b720ba9cd47c7d02b00225b --- /dev/null +++ b/detail_png/Shaft_00009_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5848a3890bb998b2851187ce59ca43b7b4c30252211b550a393579a9d48796c9 +size 51892 diff --git a/detail_png/Shaft_00009_title.png b/detail_png/Shaft_00009_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4d6c5d6c39ca5ed609cf8e9e4816cb2a703420d6 --- /dev/null +++ b/detail_png/Shaft_00009_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65758d193ef44d1dff72ce64d0e2f8051d4ebc254aaa1f7b969778303b4a17aa +size 50729 diff --git a/detail_png/Shaft_00010_diam.png b/detail_png/Shaft_00010_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ce0c0dd3bb740e7d8af075ee937aadef3b8312ff --- /dev/null +++ b/detail_png/Shaft_00010_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56baf6ddb0ecc275abfefb8a4f9e339cdaf256d5d1e29c8988b5a81415f49d99 +size 37119 diff --git a/detail_png/Shaft_00010_length.png b/detail_png/Shaft_00010_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7ba01a229f1fcb83d9a1752f95d428a6fc38d490 --- /dev/null +++ b/detail_png/Shaft_00010_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea74fe4840d1791d81d561c1a9e5d5d073c9d37260dd7ffa8d391dd9b0f6c6be +size 44128 diff --git a/detail_png/Shaft_00010_title.png b/detail_png/Shaft_00010_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3198cb9dfeae2cb48386e99a9c789f2436a21186 --- /dev/null +++ b/detail_png/Shaft_00010_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64275a39c0a3e73114a4f2da0648541f2e951f99656ec2c3ffcde93484dc4bbe +size 49340 diff --git a/detail_png/Shaft_00012_diam.png b/detail_png/Shaft_00012_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0d9bf793189d1e265715553e53333858d7afd942 --- /dev/null +++ b/detail_png/Shaft_00012_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:771e64068920e602e5c5ffdfc950f6f03928c44f363631d051438d35b52a5a37 +size 51656 diff --git a/detail_png/Shaft_00012_length.png b/detail_png/Shaft_00012_length.png new file mode 100644 index 0000000000000000000000000000000000000000..205ad4401f3d0dd849cb56e1f075df3c143f7d0a --- /dev/null +++ b/detail_png/Shaft_00012_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad87f2c99f1626ba045b08e73cdfdc86a7c579cd91475b453352a5a18ab635cf +size 40689 diff --git a/detail_png/Shaft_00012_title.png b/detail_png/Shaft_00012_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1536e6efd8ee0ea8e579864c5fb5800da39eb140 --- /dev/null +++ b/detail_png/Shaft_00012_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f05e2aa29e58f1e4f2325caf8f3fbe6248430849f3e5dd0bec07a454d300a8d +size 47573 diff --git a/detail_png/Shaft_00013_diam.png b/detail_png/Shaft_00013_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5483e4deb06404299891862e01174a3c0db325a3 --- /dev/null +++ b/detail_png/Shaft_00013_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cbc19063bd1c6678ec6c8895ce92c31bb17536ad9b29fdeb279cba9aab265dc +size 53534 diff --git a/detail_png/Shaft_00013_length.png b/detail_png/Shaft_00013_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fdc739aaadb65c8755f04aaaaeb0bc5c961160d4 --- /dev/null +++ b/detail_png/Shaft_00013_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:034eb3ea8332590f14a7442b89cc9a4dee202030dd17d3543f89fdd1cbfcb300 +size 41594 diff --git a/detail_png/Shaft_00013_title.png b/detail_png/Shaft_00013_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2c61007b0ba9e2e588b1e57190daefcc2b840d87 --- /dev/null +++ b/detail_png/Shaft_00013_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd42e1e0ff078cc5a92904030d80256dd5954162b1f0f45267faa9411e6e2b6e +size 29909 diff --git a/detail_png/Shaft_00016_diam.png b/detail_png/Shaft_00016_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..39275c2c48ceab2c04d0bca6b05b2af29f041b5c --- /dev/null +++ b/detail_png/Shaft_00016_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f416a4b6ccea14e9a4e4cf81425ad8edb7693faaa9f2aee8fc4e625e69300e9 +size 38461 diff --git a/detail_png/Shaft_00016_length.png b/detail_png/Shaft_00016_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f9d8cf624e406397e9bae7bf40765230503623ab --- /dev/null +++ b/detail_png/Shaft_00016_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed486abd30a3740f9a7d0c389152cff0d848c8ec29843f7e1b444b1f1ed4e852 +size 30641 diff --git a/detail_png/Shaft_00016_title.png b/detail_png/Shaft_00016_title.png new file mode 100644 index 0000000000000000000000000000000000000000..48eb282bd43be495516110f65431c7bd5e0ffdec --- /dev/null +++ b/detail_png/Shaft_00016_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4856edc5a40ec956e21993321cfb78426fd8f004645fe76f66375f910cf7ef04 +size 37111 diff --git a/detail_png/Shaft_00019_diam.png b/detail_png/Shaft_00019_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d57138194d8e1c88f70e30804d24d56e587a02fe --- /dev/null +++ b/detail_png/Shaft_00019_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fdef69ef72e15155f4e53ab5d8b9b0f36b628d00a661408a755d488a4aa39a1c +size 36992 diff --git a/detail_png/Shaft_00019_length.png b/detail_png/Shaft_00019_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e99aa4c751c73b26a0bdc1438671a5efd408a6c9 --- /dev/null +++ b/detail_png/Shaft_00019_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a7085d519b9f625cb017187a23abab53e2c915496e5b5b24eda26cc664cc3de +size 35365 diff --git a/detail_png/Shaft_00019_title.png b/detail_png/Shaft_00019_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0d7c681aff8af9686ce3a1a8a2dca6330130d9e0 --- /dev/null +++ b/detail_png/Shaft_00019_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29f61d5d87d8cc3ebf16ba9d0c1772d98c1e965c1bceb55dd566884354170434 +size 49862 diff --git a/detail_png/Shaft_00023_diam.png b/detail_png/Shaft_00023_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f0a36f557439455556e4b43f572a6477e95787da --- /dev/null +++ b/detail_png/Shaft_00023_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a22da74a55c651a51370214dcc4615ad17fa1191a9ba3386eda2d4c4babec790 +size 45445 diff --git a/detail_png/Shaft_00023_length.png b/detail_png/Shaft_00023_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b24e2ae2d4026b0621c5cd68f6a35c59a5779c43 --- /dev/null +++ b/detail_png/Shaft_00023_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb9980f38906d38b5e13a9dd5f6d911dca852f4017ffc5d62d19d6952dd371f3 +size 55234 diff --git a/detail_png/Shaft_00023_title.png b/detail_png/Shaft_00023_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c80ff001f73f4c3002f3dffd7c9d2aa0132a052 --- /dev/null +++ b/detail_png/Shaft_00023_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47119324e1117004cad6afcd4a64302ca614e2899752d92885d811bb2afc1dc0 +size 57657 diff --git a/detail_png/Shaft_00026_diam.png b/detail_png/Shaft_00026_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6d6d734959339f2476877403dbeb80001746bc0b --- /dev/null +++ b/detail_png/Shaft_00026_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f14cb088af29f319e42c33e62f97c2b9706b187cc811e0ee7773c7bc43097e6e +size 54496 diff --git a/detail_png/Shaft_00026_length.png b/detail_png/Shaft_00026_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ba3a926194d949c9d4c5636ed478f56c6bd932b1 --- /dev/null +++ b/detail_png/Shaft_00026_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:713286c9d409a75bc41cbc23f875baf53633d8652e3b5a9c37b818cb973fed99 +size 72412 diff --git a/detail_png/Shaft_00026_title.png b/detail_png/Shaft_00026_title.png new file mode 100644 index 0000000000000000000000000000000000000000..56a0ebdecd082ae04142a066174c053eb7375785 --- /dev/null +++ b/detail_png/Shaft_00026_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f52f75e42004dbe8d7fdfac6a9cb1f8efd9f90f0be6a2631e6cc7cd04ff26bf7 +size 52932 diff --git a/detail_png/Shaft_00027_diam.png b/detail_png/Shaft_00027_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..360f1f291e23a2d613d75b7a6a1de87e3a120e20 --- /dev/null +++ b/detail_png/Shaft_00027_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a1e097b2962deffac0adcb411e6355c972f3a7fb5b31daaf630d42fb4a773bc +size 43185 diff --git a/detail_png/Shaft_00027_length.png b/detail_png/Shaft_00027_length.png new file mode 100644 index 0000000000000000000000000000000000000000..16c7dc1258dbde2c111dc9ad9d75ee8de20be2f6 --- /dev/null +++ b/detail_png/Shaft_00027_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af8597e17cb86be3c1c8d38e6ed4cb619e0b94ae0f033c393cce78b2b512c743 +size 38665 diff --git a/detail_png/Shaft_00027_title.png b/detail_png/Shaft_00027_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cd7d4c5794ee229bbe80f8fb71375f0aa92f1bd4 --- /dev/null +++ b/detail_png/Shaft_00027_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:625d308238582a6c1d4b1323c793bc422492735e48463ad737fcc46582499a18 +size 33837 diff --git a/detail_png/Shaft_00041_diam.png b/detail_png/Shaft_00041_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7e578689c5b40564fb9e36f5cea97cdd1196d9aa --- /dev/null +++ b/detail_png/Shaft_00041_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c36ecf010752aa599b0b2a4e44402a76b61f1ade1a00a63ecb27eb1f84d27266 +size 47109 diff --git a/detail_png/Shaft_00041_length.png b/detail_png/Shaft_00041_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1b5e9f89b7f21f369651d6c50ae185f53aecf115 --- /dev/null +++ b/detail_png/Shaft_00041_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:163a16fe06af371f9182d3489f001dcddd5e4382b97f8f17e20612a939b50553 +size 50338 diff --git a/detail_png/Shaft_00041_title.png b/detail_png/Shaft_00041_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fe9507ed4b9b4062672f35c206f3dd8490ef7d64 --- /dev/null +++ b/detail_png/Shaft_00041_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36d59728f0e68f908287aac26530d9256d39efa49cce302afe067370420000f9 +size 53518 diff --git a/detail_png/Shaft_00042_diam.png b/detail_png/Shaft_00042_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b0ee78c7b975646c9f0434f24d8fb330a68621e9 --- /dev/null +++ b/detail_png/Shaft_00042_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c654f58065904451284139ec6b843431bf71abb9b3f8d94bf03b9c401a56d8c +size 38078 diff --git a/detail_png/Shaft_00042_length.png b/detail_png/Shaft_00042_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7f0182c450561e93a9a3c8f4b59823cc51390f5d --- /dev/null +++ b/detail_png/Shaft_00042_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d13ac7af991125da32fbc28e078fb02df98f37120b4dc7a9249b65d59d04191 +size 35755 diff --git a/detail_png/Shaft_00042_title.png b/detail_png/Shaft_00042_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6b0addb44e5202e356b7db8ae009ea1166df2660 --- /dev/null +++ b/detail_png/Shaft_00042_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06a38090e3082565c4b530d121d910ac41e99ec4df6b1eca6e7e52773d752f2c +size 39934 diff --git a/detail_png/Shaft_00043_diam.png b/detail_png/Shaft_00043_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..732fc9fa8b9faa3902d976b542b04e598e1877d5 --- /dev/null +++ b/detail_png/Shaft_00043_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa98384bdce21e67c37f3e764a9599ad1c42bdaa27477bf3aba537f99794ddf0 +size 33420 diff --git a/detail_png/Shaft_00043_length.png b/detail_png/Shaft_00043_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c8f4884aa33e7ee4ee1cba352ce3d9d02ab3f770 --- /dev/null +++ b/detail_png/Shaft_00043_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f64d369e621b345c11828bd1b894670fda0069d07f0ed03e87fd1907825e813d +size 32427 diff --git a/detail_png/Shaft_00043_title.png b/detail_png/Shaft_00043_title.png new file mode 100644 index 0000000000000000000000000000000000000000..49a44aad88ec639be1c96204f66c8b24bc037086 --- /dev/null +++ b/detail_png/Shaft_00043_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5404ea8892b51bc94f0178883d330cbed6e0cffece61c3f5627d3c536f6f5bd4 +size 28963 diff --git a/detail_png/Shaft_00044_diam.png b/detail_png/Shaft_00044_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8e26ad3fd8372d0778ff304a7b90916099eb9c9a --- /dev/null +++ b/detail_png/Shaft_00044_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e9da037fe2500dd1591b772b836ad926ce941b98ef983f60c03eb912ec3f788 +size 45827 diff --git a/detail_png/Shaft_00044_length.png b/detail_png/Shaft_00044_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e3c62b0ff0647036ec416d7f2dfdd5a72c2edf1 --- /dev/null +++ b/detail_png/Shaft_00044_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1547093732d0574e91cd5a610ac59a0ed4f5d382af44b7e6d0198236c1f07995 +size 49675 diff --git a/detail_png/Shaft_00044_title.png b/detail_png/Shaft_00044_title.png new file mode 100644 index 0000000000000000000000000000000000000000..180a66caeeeee2831c88154283a85f2b19a6796c --- /dev/null +++ b/detail_png/Shaft_00044_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f144db3bc8e89caaeaf20f1f9e8e22a2adb388397ea48ae08376f795d255a9e2 +size 49627 diff --git a/detail_png/Shaft_00045_diam.png b/detail_png/Shaft_00045_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94819b2d191c45ea50380ac64f5ab0b06d1ec8c0 --- /dev/null +++ b/detail_png/Shaft_00045_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3c8e9b856028e47529e0c70b7a5a1bccec205e96005506ed7b6f35c596a7758 +size 35838 diff --git a/detail_png/Shaft_00045_length.png b/detail_png/Shaft_00045_length.png new file mode 100644 index 0000000000000000000000000000000000000000..74865a1c27b3e41d44fa8b26fb278ab7822fcc1f --- /dev/null +++ b/detail_png/Shaft_00045_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79e3be5f2320fe7cdd5c0a0d507af7867a59b4da5f061ee5bb7072f2a5ea105e +size 35654 diff --git a/detail_png/Shaft_00045_title.png b/detail_png/Shaft_00045_title.png new file mode 100644 index 0000000000000000000000000000000000000000..10780c09b3f4408b6292382acc42341e3dcee56b --- /dev/null +++ b/detail_png/Shaft_00045_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60b6d9a0623a9d98c36c3d7302d78f9e9562363d612fd0c2cc9db8481e8b86b3 +size 54026 diff --git a/detail_png/Shaft_00046_diam.png b/detail_png/Shaft_00046_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..62c2edb8f863c6ced025514ae15b9457cf0f6a59 --- /dev/null +++ b/detail_png/Shaft_00046_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53c26384decdfd29c66a87c576dd57288ec95adda7984905d49ed458f8e07049 +size 36901 diff --git a/detail_png/Shaft_00046_length.png b/detail_png/Shaft_00046_length.png new file mode 100644 index 0000000000000000000000000000000000000000..76203d4d97ce0181f45e3146b83a4d1ceb5ef1a7 --- /dev/null +++ b/detail_png/Shaft_00046_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3625af21bf964bfada9003e7a90aadfedbc2e5a7bcfba9da79a991eedb9e354 +size 32019 diff --git a/detail_png/Shaft_00046_title.png b/detail_png/Shaft_00046_title.png new file mode 100644 index 0000000000000000000000000000000000000000..74532924c19c4e87cd269e01dbb72f6c0287d880 --- /dev/null +++ b/detail_png/Shaft_00046_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a58a740b9c22fd96ded972abb9d5732312ce6ecc6ff735aa7c4c381b75e21a29 +size 40396 diff --git a/detail_png/Shaft_00047_diam.png b/detail_png/Shaft_00047_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c248d740fe7706af3e4e30ab3f096735622bbd2f --- /dev/null +++ b/detail_png/Shaft_00047_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ce82bdd2e011b4a6c79864673c49edee4432b918f7f82703634ab85670b8924 +size 38082 diff --git a/detail_png/Shaft_00047_length.png b/detail_png/Shaft_00047_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0f7fcf9b5b2fa81b4a3103acb4e97a6847d42582 --- /dev/null +++ b/detail_png/Shaft_00047_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:824f03a21a9153d4957198d8f49564bb7b01a4184d05647a67120d6a40a89ad5 +size 29740 diff --git a/detail_png/Shaft_00047_title.png b/detail_png/Shaft_00047_title.png new file mode 100644 index 0000000000000000000000000000000000000000..af15176efeddb25fb9d3c61bb5be39f0b0854157 --- /dev/null +++ b/detail_png/Shaft_00047_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:493ec49cb5d18a67833b7006982852d18999bb67e4fceed9abc4277ca66f9e87 +size 24335 diff --git a/detail_png/Shaft_00051_diam.png b/detail_png/Shaft_00051_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cb1c271de5e14713b5c7f95b3765829ce0c1bd89 --- /dev/null +++ b/detail_png/Shaft_00051_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be8bfdfc9736d9ab4879609f0c0a520c4321d16ccf37433e0c086ddb13f5ea23 +size 71589 diff --git a/detail_png/Shaft_00051_length.png b/detail_png/Shaft_00051_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d4290aac166dd45d9a4bb79317a4ae1d88c5977b --- /dev/null +++ b/detail_png/Shaft_00051_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:420d180e4eab3d4c52d7a6d1952c2549d521252b5a10e01ad2334cc5d186bf37 +size 54488 diff --git a/detail_png/Shaft_00051_title.png b/detail_png/Shaft_00051_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7a8b830663df431d227b4ae1aaea7a0e3c8e6048 --- /dev/null +++ b/detail_png/Shaft_00051_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6632a8c0fe0328332ae0ee8135a1c803912f1c4c4e2055caa6aa1fb69c9e177 +size 38135 diff --git a/detail_png/Shaft_00052_diam.png b/detail_png/Shaft_00052_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6494ca7aaa1ac480e6cb348a300ac50aa64338cc --- /dev/null +++ b/detail_png/Shaft_00052_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60ac12342872e5d6704ca9601639cef2f40c7613ec309be4212131d9e6e004b2 +size 42584 diff --git a/detail_png/Shaft_00052_length.png b/detail_png/Shaft_00052_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e256b0fca03843b849fe211a4930a70072bcbb9 --- /dev/null +++ b/detail_png/Shaft_00052_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46b6e7cb73d10df115f980770cf0360cd2027086febad3859f33529b9ed89cd3 +size 35646 diff --git a/detail_png/Shaft_00052_title.png b/detail_png/Shaft_00052_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1f57948e11f284d9db243d4686bb76603da2452a --- /dev/null +++ b/detail_png/Shaft_00052_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2920960115e6661745f727f82afab30c1b6ea410b4cdfcef930d3e70e73510bd +size 32300 diff --git a/detail_png/Shaft_00056_diam.png b/detail_png/Shaft_00056_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d29527a7539e8706b9b67d22d3e3704abc7eb674 --- /dev/null +++ b/detail_png/Shaft_00056_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8c6c3090f8b6a6215eb1e4c49daede621855f66f60088ccaee6754053ac346a +size 47094 diff --git a/detail_png/Shaft_00056_length.png b/detail_png/Shaft_00056_length.png new file mode 100644 index 0000000000000000000000000000000000000000..148e69ebde877b375bc378a362d465b0b8ba24ad --- /dev/null +++ b/detail_png/Shaft_00056_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8394f046bcfb82e0757bbfb8792e4b83d25ce191f4f88d49cb9458ef76f9a27b +size 68134 diff --git a/detail_png/Shaft_00056_title.png b/detail_png/Shaft_00056_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c9b683a54213a5d75e34b85c3dfdfe08be32b8a1 --- /dev/null +++ b/detail_png/Shaft_00056_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:793eea7c5a37d4390834d7e547b25c072c950b6b64e98a15b01fb0116d62238a +size 53719 diff --git a/detail_png/Shaft_00058_diam.png b/detail_png/Shaft_00058_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f1b3e9bce453611d3ea65f8e07ddfda1869d3dd6 --- /dev/null +++ b/detail_png/Shaft_00058_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9288d812416bd96cc25d4034e0f61b2d37545e8aad337cd34494c4c488fc3bf +size 38719 diff --git a/detail_png/Shaft_00058_length.png b/detail_png/Shaft_00058_length.png new file mode 100644 index 0000000000000000000000000000000000000000..801972bb9aede4aff93c057d83b107115bf84a3d --- /dev/null +++ b/detail_png/Shaft_00058_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49295940e3c985169d7c0968dc2dfb896800ee5d69cc1b6acbd348a2ce85ee6f +size 41358 diff --git a/detail_png/Shaft_00058_title.png b/detail_png/Shaft_00058_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fb71877dd9e0c0782a6bd46b2c8205b244724758 --- /dev/null +++ b/detail_png/Shaft_00058_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccc5049c89a50491def0458dd3f013af96d42f59a05cb2ab34daa976d2df02ba +size 61500 diff --git a/detail_png/Shaft_00066_diam.png b/detail_png/Shaft_00066_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a59678c94fcd071b70e0a9adf6f9c547f77eede5 --- /dev/null +++ b/detail_png/Shaft_00066_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3e105a2822bbd9e69b4637d87f35572aef0ceff1fee07e7c905ce38b2424bb6 +size 37186 diff --git a/detail_png/Shaft_00066_length.png b/detail_png/Shaft_00066_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5a3484c56a8bdb6070b0bead28fd84071325ca22 --- /dev/null +++ b/detail_png/Shaft_00066_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53bf4fbe0973f8c78bf73278d1b9572e284fbb5db89f6ba2a2d307aed13c187d +size 30325 diff --git a/detail_png/Shaft_00066_title.png b/detail_png/Shaft_00066_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51caaf70fec3c8e0c46846145dffee4cc1a076fd --- /dev/null +++ b/detail_png/Shaft_00066_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc1132c9250f363c64348c90a4d3199f45fd030a3aff8b4bed0afc89f6f08951 +size 34144 diff --git a/detail_png/Shaft_00067_diam.png b/detail_png/Shaft_00067_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8d2fd8e910d44d886d09fdb2b6a7cfa0c8de9893 --- /dev/null +++ b/detail_png/Shaft_00067_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a49f7d5f3f60b7aae18694133578a99d2496dd6174251e95f6c9b0bfad051a0 +size 36853 diff --git a/detail_png/Shaft_00067_length.png b/detail_png/Shaft_00067_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2f976ffd6fec019146bfc4fe4aa51678a840c400 --- /dev/null +++ b/detail_png/Shaft_00067_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c524d0f134614ccb0876df87ef52a18b0cbf01346e4a2724c6d06223f1fd457 +size 29128 diff --git a/detail_png/Shaft_00067_title.png b/detail_png/Shaft_00067_title.png new file mode 100644 index 0000000000000000000000000000000000000000..08366265b561e793e0ac50d200e06895663b3209 --- /dev/null +++ b/detail_png/Shaft_00067_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ea70c4c0a2c2a405ba344c419f90a15c96943cda9d93f642470af50710bf62b +size 43063 diff --git a/detail_png/Shaft_00069_diam.png b/detail_png/Shaft_00069_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1eb8fa8bba726607934419f79c703d7861e71184 --- /dev/null +++ b/detail_png/Shaft_00069_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5005dfab04911cbb85ffca2512ead8351c18f9f1878f9f52694e347e332245b +size 38658 diff --git a/detail_png/Shaft_00069_length.png b/detail_png/Shaft_00069_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29a43e11a43e0533358869ecfc9173e397a5edbf --- /dev/null +++ b/detail_png/Shaft_00069_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbeebef60f216596febf148f56c7b69f9a8964505821ce99d9513a8ab4a54c02 +size 42245 diff --git a/detail_png/Shaft_00069_title.png b/detail_png/Shaft_00069_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6869bda8360fb93c8cf0aa6f151c04294655a7a4 --- /dev/null +++ b/detail_png/Shaft_00069_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd08f717b328d2e878bda5d2d7316cca38bddab845293bbae9bb2b45b3136ef0 +size 52508 diff --git a/detail_png/Shaft_00070_diam.png b/detail_png/Shaft_00070_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fa523de97a3c59e75d6c318829acd4d435fb3aea --- /dev/null +++ b/detail_png/Shaft_00070_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c341d351702524e3508b550de94824ad517a01f20f460ed4d63ba7b4ec34d634 +size 35426 diff --git a/detail_png/Shaft_00070_length.png b/detail_png/Shaft_00070_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c33d66203948024f448dc7418d96a6ca200af835 --- /dev/null +++ b/detail_png/Shaft_00070_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e96533b886dfb8db1c841c92865fd96227f04e234b8ed490dad42be5ce95411 +size 33974 diff --git a/detail_png/Shaft_00070_title.png b/detail_png/Shaft_00070_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0821a985453f62190754a2eb68ac6b900c872bfc --- /dev/null +++ b/detail_png/Shaft_00070_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89b374d11758f919719ff9b126bc0d518ddecb1ac0c1e685c5d0a921b6325395 +size 54346 diff --git a/detail_png/Shaft_00078_diam.png b/detail_png/Shaft_00078_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..709a86c14247568a716c6868a138ab09f576cb35 --- /dev/null +++ b/detail_png/Shaft_00078_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0005014de2dba4f89d2de90141612c50de999147f04a470d0280362e35c2507 +size 48408 diff --git a/detail_png/Shaft_00078_length.png b/detail_png/Shaft_00078_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d0b4465e22abeb593b5cd9b40d015a0af245ccae --- /dev/null +++ b/detail_png/Shaft_00078_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bf29083a6d94ec596921e1291389725ebd3686a3f131f9919f533367530c56b +size 45870 diff --git a/detail_png/Shaft_00078_title.png b/detail_png/Shaft_00078_title.png new file mode 100644 index 0000000000000000000000000000000000000000..641fd5e6903426fc7ac7ec3c539aa0a2b2146cb2 --- /dev/null +++ b/detail_png/Shaft_00078_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06147fbfbf7a721413b363c14b6356abeca1d05e0c39debc9cf7476f9deb4d81 +size 51266 diff --git a/detail_png/Shaft_00079_diam.png b/detail_png/Shaft_00079_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..17326356e621a56cde18c81931592884d6603531 --- /dev/null +++ b/detail_png/Shaft_00079_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8524bbb5bc0c61171461d74b6f26ff55ef0b80d4da117361a1293687c061cb11 +size 35149 diff --git a/detail_png/Shaft_00079_length.png b/detail_png/Shaft_00079_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7d7ac009554b4e881964ce0ab3d7b7c5af8aba6 --- /dev/null +++ b/detail_png/Shaft_00079_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21a451aacc35cea2b17d6ad7e73b693432eb7fcd07cdd80fbc4be44638abe2b6 +size 30197 diff --git a/detail_png/Shaft_00079_title.png b/detail_png/Shaft_00079_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f9caef8f5d9068121913958e7184b32f7085995f --- /dev/null +++ b/detail_png/Shaft_00079_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c25e15ea05c8d28679b26970ffb786a9f0b01c4b09eea7903c0ca52c545c7f0 +size 33176 diff --git a/detail_png/Shaft_00081_diam.png b/detail_png/Shaft_00081_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..242530ef0ce15e53d65d5f27cad8e60dd219fc6f --- /dev/null +++ b/detail_png/Shaft_00081_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:326a6f6adb0e1c8f1338428a32e7eae7a2dc5364bce3a1a43568868526266b31 +size 54658 diff --git a/detail_png/Shaft_00081_length.png b/detail_png/Shaft_00081_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cebd0d18946672e5855ea4cf82d16a87928b4ca8 --- /dev/null +++ b/detail_png/Shaft_00081_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4e03a1fdf1822ab177c60fa9ccd0aa49b51b58afd04c6081263be6750e9544c +size 68210 diff --git a/detail_png/Shaft_00081_title.png b/detail_png/Shaft_00081_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cf84b10b6f7a4b77a92a51fc5b5fd42991bc53b0 --- /dev/null +++ b/detail_png/Shaft_00081_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93818051e31d5a0ecc48ef4dc875acc471e06f8ece7d7452d681180170cc53ec +size 50716 diff --git a/detail_png/Shaft_00085_diam.png b/detail_png/Shaft_00085_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c835f35d9c30423c1ce464f7360703522e81c681 --- /dev/null +++ b/detail_png/Shaft_00085_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e2e7412ba702a111c71ead529aba71150271bc8de339ea54f6436451cdeb25f +size 59398 diff --git a/detail_png/Shaft_00085_length.png b/detail_png/Shaft_00085_length.png new file mode 100644 index 0000000000000000000000000000000000000000..227f2ab8d1e1159104e258b8dfacaed0887f0d53 --- /dev/null +++ b/detail_png/Shaft_00085_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30a1c41cb21ca643af7a1a7175fc863989ec3fa1fda3ac9cd913f5cead7834d3 +size 46116 diff --git a/detail_png/Shaft_00085_title.png b/detail_png/Shaft_00085_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d3cedbcac53705306ff23fd9c0272167333eeb95 --- /dev/null +++ b/detail_png/Shaft_00085_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9eca43c8f515ec6dc54312642d3febb9e3d45694445d02b7d082cfbb9a73f161 +size 42785 diff --git a/detail_png/Shaft_00088_diam.png b/detail_png/Shaft_00088_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cab17ee09ff1dd7c7f028d4cdfa2d9b92a63db44 --- /dev/null +++ b/detail_png/Shaft_00088_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79b66eb9918ec5c617b780845ca7af43fc98d09e2eb6756c45d735250ed90435 +size 30266 diff --git a/detail_png/Shaft_00088_length.png b/detail_png/Shaft_00088_length.png new file mode 100644 index 0000000000000000000000000000000000000000..43b4a0900a18f20a87a3ba3eadc2ba3093bf60d5 --- /dev/null +++ b/detail_png/Shaft_00088_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b49e2afcf4354caf474bfa4bda05060b00e496d4b2069479f9c9342b0bc5b6ab +size 28543 diff --git a/detail_png/Shaft_00088_title.png b/detail_png/Shaft_00088_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4e01e72fe2c0d4ad745f7f395b01465e659cb57d --- /dev/null +++ b/detail_png/Shaft_00088_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6e75391fa0cf368384f4308ebd94b1212f2fb4ed9ba0b96f212b440a58bb4d3 +size 33049 diff --git a/detail_png/Shaft_00089_diam.png b/detail_png/Shaft_00089_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a3927d0e97e7bf19db809ba398065f32e5eeadf7 --- /dev/null +++ b/detail_png/Shaft_00089_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c980201523c43b7798437327d6a22b283de3d2b2d0c6d394c47a4122c02b137 +size 21013 diff --git a/detail_png/Shaft_00089_length.png b/detail_png/Shaft_00089_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6adbba5aa44bae1797bff508f14fa433b04bcee6 --- /dev/null +++ b/detail_png/Shaft_00089_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a162307e9e2d58bd4da633f16d30ceef57fbd7ca227339a88a430321a442cfd2 +size 23814 diff --git a/detail_png/Shaft_00089_title.png b/detail_png/Shaft_00089_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3b61b08f5fdb9434106b39f3b64f2b94eecbe0fa --- /dev/null +++ b/detail_png/Shaft_00089_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50b95c8d66105eeb1c5e2d0936ded21a1c3a2f4b89f78cebb9fddeac76e7188b +size 36629 diff --git a/detail_png/Shaft_00090_diam.png b/detail_png/Shaft_00090_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9e17e9af05704c8baf41da42c06c9aa841765e6f --- /dev/null +++ b/detail_png/Shaft_00090_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ddd933a206d7c4a4f1f28a802e6e81554632d9124529842fdebe291003d83a9 +size 23970 diff --git a/detail_png/Shaft_00090_length.png b/detail_png/Shaft_00090_length.png new file mode 100644 index 0000000000000000000000000000000000000000..768e09e2bebe43825d7b902f44432361432d285b --- /dev/null +++ b/detail_png/Shaft_00090_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ea374ddd2ad49bbd750f73e1151e0152b5881a2108fb2be67f1a014bd6c6952 +size 19288 diff --git a/detail_png/Shaft_00090_title.png b/detail_png/Shaft_00090_title.png new file mode 100644 index 0000000000000000000000000000000000000000..72432ca14308f748ee6234dbfd25f80b11bed2c8 --- /dev/null +++ b/detail_png/Shaft_00090_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b410d6659d723d2c13b48f7228088cd09ca8cf5eb10cf6f11a13cf4ab7bebd84 +size 23450 diff --git a/detail_png/Shaft_00094_diam.png b/detail_png/Shaft_00094_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b43d0296018ee0e8dccca0061992bfaaf57c30ce --- /dev/null +++ b/detail_png/Shaft_00094_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa29ba4ba6d8b143f299cb703a967926a3308d9262ce9059e2e8321330194fab +size 30290 diff --git a/detail_png/Shaft_00094_length.png b/detail_png/Shaft_00094_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b509795571bbd190ed9faec05caa2521a78eace6 --- /dev/null +++ b/detail_png/Shaft_00094_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:120d3aacc1b96cbe1e6648fefc95fde32449a15e6e615237644e46099697d9ca +size 28680 diff --git a/detail_png/Shaft_00094_title.png b/detail_png/Shaft_00094_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2a013d172df6bc9a998423ad356e66d24a275d05 --- /dev/null +++ b/detail_png/Shaft_00094_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16df5d33e8af19e576a2e38ecef16ffcf3ffab7fc4cfe899788a3e1c441da7f0 +size 32254 diff --git a/detail_png/Shaft_00100_diam.png b/detail_png/Shaft_00100_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bbfd5d76b15e1a2d2570cec171eb14e8d269559a --- /dev/null +++ b/detail_png/Shaft_00100_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3e19e5aa67da645f2bc5b31c2061b043e8ed47c25dee7e7357509dd7139ccd1 +size 20544 diff --git a/detail_png/Shaft_00100_length.png b/detail_png/Shaft_00100_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1dc6451a56cbb87b02ffbc411f84c7208a8fb7eb --- /dev/null +++ b/detail_png/Shaft_00100_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95bd63c4dfd39c7c22d83da82fc76fb4aae4d46b0f1a6aab0ce58a701216c0fc +size 18580 diff --git a/detail_png/Shaft_00100_title.png b/detail_png/Shaft_00100_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7bab34a001706e0059c1ffbea9c3bc8d8939f95f --- /dev/null +++ b/detail_png/Shaft_00100_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e52b07f63ba276d83a755f5f7fd959eeac2d35a9677275e972b4e098af4ecba +size 21717 diff --git a/detail_png/Shaft_00104_diam.png b/detail_png/Shaft_00104_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6e2f598a6e6c52b969f168cc5aac2c460422ee83 --- /dev/null +++ b/detail_png/Shaft_00104_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7604ba24a3f45c000fd0c24768d7c770df960380405846a1fe8f41d52bfc564 +size 29718 diff --git a/detail_png/Shaft_00104_length.png b/detail_png/Shaft_00104_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bb657fd21522cf4522ce895bc8a9c7494855cc34 --- /dev/null +++ b/detail_png/Shaft_00104_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d450496417d1445a7feedd612e1420b7adf470e604e33be3bb0ef7bdc987997 +size 28140 diff --git a/detail_png/Shaft_00104_title.png b/detail_png/Shaft_00104_title.png new file mode 100644 index 0000000000000000000000000000000000000000..764af2846f79d4e345869b5c6fd9ef315db0b70d --- /dev/null +++ b/detail_png/Shaft_00104_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a1c771f6dce1ee358df6b9f623b5427dcec5fed54d5ff33c5681fd0616b81c9 +size 27119 diff --git a/detail_png/Shaft_00106_diam.png b/detail_png/Shaft_00106_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ba603e20d70b6d246f6f040d1ae6e74fcb2cbb44 --- /dev/null +++ b/detail_png/Shaft_00106_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e704159082197186fdac69bdf13cf00abbdbf23ae1729855323ba7ee67446d60 +size 20003 diff --git a/detail_png/Shaft_00106_length.png b/detail_png/Shaft_00106_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2560baa0531e34a3c6cbfcc53938484bd531af0d --- /dev/null +++ b/detail_png/Shaft_00106_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15befbb5b42e5a92dfaf5543c08900ee1494503c4c709623db78430b76ed1726 +size 16598 diff --git a/detail_png/Shaft_00106_title.png b/detail_png/Shaft_00106_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d71d42bf8f597bf457097c93798166e27ce66f00 --- /dev/null +++ b/detail_png/Shaft_00106_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87adfdbb2c3458efd7737d9a53c7837fc8a931f7c99983d6f618f5cc79e2cf74 +size 19644 diff --git a/detail_png/Shaft_00111_diam.png b/detail_png/Shaft_00111_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2a88e46f3c3a06037a250c986c8e7a353ba376a7 --- /dev/null +++ b/detail_png/Shaft_00111_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:099540fe64034f43985ec27420d8661646d4406ea14828626e55d9da9ba57ab7 +size 20477 diff --git a/detail_png/Shaft_00111_length.png b/detail_png/Shaft_00111_length.png new file mode 100644 index 0000000000000000000000000000000000000000..be05f75207dde9fc2b9e617abe910eb7f961d6ff --- /dev/null +++ b/detail_png/Shaft_00111_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1e40bce3c2657abd3ee615539cc0ded256ec7fa5a7d286b28fd8b7111e87c3c +size 27138 diff --git a/detail_png/Shaft_00111_title.png b/detail_png/Shaft_00111_title.png new file mode 100644 index 0000000000000000000000000000000000000000..32dfa1f14f527ca344c7fcf861a6bc640071eafc --- /dev/null +++ b/detail_png/Shaft_00111_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:406a16a217232e47f956934b78be14c06684e3946243e48f45e6c6d37222ef24 +size 27851 diff --git a/detail_png/Shaft_00113_diam.png b/detail_png/Shaft_00113_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fb22ba34093f1ad98b3f218210de6f10ca5f4251 --- /dev/null +++ b/detail_png/Shaft_00113_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5d1ab321f746b60073d37a7147f5f9ead5a6650ac5f256ced29b34ec6b88242 +size 19485 diff --git a/detail_png/Shaft_00113_length.png b/detail_png/Shaft_00113_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e84952320d341595882582a4ceba3d869afce5f4 --- /dev/null +++ b/detail_png/Shaft_00113_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec0febd00d62503c5db0e1b61acb0968601d586674b3ccf22eeb36be16ecde43 +size 18707 diff --git a/detail_png/Shaft_00113_title.png b/detail_png/Shaft_00113_title.png new file mode 100644 index 0000000000000000000000000000000000000000..92311613091b64aa489ecdee3fe0927f5403a9eb --- /dev/null +++ b/detail_png/Shaft_00113_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec516b1be8b16fe9d0bd947b58727c3c0169792b1030cba4ec554d0a781eebda +size 27496 diff --git a/detail_png/Shaft_00116_diam.png b/detail_png/Shaft_00116_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e281127b00f90f788332e7d188c6a0c0512c87b9 --- /dev/null +++ b/detail_png/Shaft_00116_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a4a858631fd3b5b55bab8e7607ceabfd3761ca0554ca0fed9db80658b9ef91f +size 18411 diff --git a/detail_png/Shaft_00116_length.png b/detail_png/Shaft_00116_length.png new file mode 100644 index 0000000000000000000000000000000000000000..34aebc75b1056d369e51ab9ccc3b681f6ffbbc81 --- /dev/null +++ b/detail_png/Shaft_00116_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:544c26706c4cb6358436dfba21607f40dbc4106fcf90937abaf2f3e8b2ba317d +size 14655 diff --git a/detail_png/Shaft_00116_title.png b/detail_png/Shaft_00116_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8db28bfb50573fbe1283ab0ab49246b5a65cbcac --- /dev/null +++ b/detail_png/Shaft_00116_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:843e0527263e2b143317b47fdcd0e0229ae11d40e87a42699d0cd93df925fe7e +size 18702 diff --git a/detail_png/Shaft_00119_diam.png b/detail_png/Shaft_00119_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1045310b905848235bd861ef0672a83a0adea6ca --- /dev/null +++ b/detail_png/Shaft_00119_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93bfe0b6589fbb8d53a30d453c211362ab4931b6566a9ff3929090d82d518774 +size 24057 diff --git a/detail_png/Shaft_00119_length.png b/detail_png/Shaft_00119_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b5d259691ec0b1322dfcd5bca0112e48537c07fb --- /dev/null +++ b/detail_png/Shaft_00119_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5184d64866353956b2a2369c3b74e62dff389dabeec93a0c3298335dade16df +size 20533 diff --git a/detail_png/Shaft_00119_title.png b/detail_png/Shaft_00119_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bc5c7447ed8369154d63e7fbbe42c514448e988f --- /dev/null +++ b/detail_png/Shaft_00119_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:248089cbce52b3c25c49dd6b58b323353c34632c019e33d60d10e5ba24afb06d +size 21681 diff --git a/detail_png/Shaft_00124_diam.png b/detail_png/Shaft_00124_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..658a128b6e24176faa5cac95539d480a04b70c9c --- /dev/null +++ b/detail_png/Shaft_00124_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5751f451511d6476dc2812eb078e313f208b0a973c1aae5a4976a4191c7455a8 +size 20000 diff --git a/detail_png/Shaft_00124_length.png b/detail_png/Shaft_00124_length.png new file mode 100644 index 0000000000000000000000000000000000000000..45f2faec84e92703b203257ccf7aa5d5cb3ae6e7 --- /dev/null +++ b/detail_png/Shaft_00124_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d04d361a2fb567c9913eca8d8f3e3f40f8c44a9f1a98a9093fee36b792f8396 +size 15384 diff --git a/detail_png/Shaft_00124_title.png b/detail_png/Shaft_00124_title.png new file mode 100644 index 0000000000000000000000000000000000000000..41b80e0479dc87d3b0a82fde43b8d65196ea93f4 --- /dev/null +++ b/detail_png/Shaft_00124_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95f5f78304f1cd87422e94eb0d4e6b031797b4906d74ead6e62bc003f6c65b46 +size 18789 diff --git a/detail_png/Shaft_00126_diam.png b/detail_png/Shaft_00126_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a711748fe7d6baa98224f0ce004dc67d93a65da3 --- /dev/null +++ b/detail_png/Shaft_00126_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c95e8cf6f2dd16c4a4f815cfa694d10319c7cabf4c2f4f278bfd10ec16946ca9 +size 23916 diff --git a/detail_png/Shaft_00126_length.png b/detail_png/Shaft_00126_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c5a911632a3c8595da87691faf91e46c5c8f3cfd --- /dev/null +++ b/detail_png/Shaft_00126_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c7c4d2b21692e661da6a0738d22ebd94c3146edcde2b24adbc1f73fdde83921 +size 22912 diff --git a/detail_png/Shaft_00126_title.png b/detail_png/Shaft_00126_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f26a855e56bd4c1aa7e17d673fb628b771f9fc71 --- /dev/null +++ b/detail_png/Shaft_00126_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57f2042498fac5f4f8445585589b8254f40a3884e2b59ad262dfa7af9e41455a +size 26071 diff --git a/detail_png/Shaft_00131_diam.png b/detail_png/Shaft_00131_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e06b0580dec3f3d38bb65348f849393a94a9c708 --- /dev/null +++ b/detail_png/Shaft_00131_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c5eb29d9b20241a9a0312c5646f35d362a9ef36e739c3056b895a9678102d58 +size 23965 diff --git a/detail_png/Shaft_00131_length.png b/detail_png/Shaft_00131_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d9ce0189caa0cbbbbfb6c8724e50d7caf22acf72 --- /dev/null +++ b/detail_png/Shaft_00131_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b29b097a590de864a3591ce1598ae04b5a404de32a555aa8f226bf5d2b2d294 +size 19614 diff --git a/detail_png/Shaft_00131_title.png b/detail_png/Shaft_00131_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dee53d66d3d354da13a1a887c56ce8636762c09b --- /dev/null +++ b/detail_png/Shaft_00131_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcb16ce19ee2f4f6a4142e43bf7c2522d1e9d158403eab2f9f93ec83a57a28b4 +size 27174 diff --git a/detail_png/Shaft_00134_diam.png b/detail_png/Shaft_00134_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..23a18499509383f0790ef2e3b89fed06e25361bb --- /dev/null +++ b/detail_png/Shaft_00134_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18fbd0b3b280eb7edff2d13f89857f4d47f8e50d266af59bdf82f5b39fa82802 +size 27838 diff --git a/detail_png/Shaft_00134_length.png b/detail_png/Shaft_00134_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc68cf047bd394e9dee6eec5149cf44a1cf7393e --- /dev/null +++ b/detail_png/Shaft_00134_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3068a64617631dff13268e3a19823a1ad5dda2e3458e8cb9cf44db84c49876a0 +size 27346 diff --git a/detail_png/Shaft_00134_title.png b/detail_png/Shaft_00134_title.png new file mode 100644 index 0000000000000000000000000000000000000000..488b9d0b8fa730957362ea11683e257106a09bd9 --- /dev/null +++ b/detail_png/Shaft_00134_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2666734357bb9557ed05587e0f1cb4516d9a750404d8263c4f63cc6d452f90f +size 26864 diff --git a/detail_png/Shaft_00136_diam.png b/detail_png/Shaft_00136_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9bb41ad9af837b2fa5773000e85c3b14ee6e006b --- /dev/null +++ b/detail_png/Shaft_00136_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e79655925e85b6ad2c8d8ecb4a5be5396c7589859b95d7c06b9c1476d46d5fc0 +size 18811 diff --git a/detail_png/Shaft_00136_length.png b/detail_png/Shaft_00136_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bfa58b29d30d09c613dbdec7c90b4576c9d08fe9 --- /dev/null +++ b/detail_png/Shaft_00136_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24a41342fab8700d2c0e6c36abd65dc7e9e0c09a8b0d34600f421f0b4236b8b8 +size 24401 diff --git a/detail_png/Shaft_00136_title.png b/detail_png/Shaft_00136_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42fb68023f6cc30d8d31b787b36e2c01b19d802a --- /dev/null +++ b/detail_png/Shaft_00136_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c70e9d15a6e7a4ccfcf93a6b80ef9a1375e7e2a4cf4b8f4ffff38709093a4722 +size 32397 diff --git a/detail_png/Shaft_00139_diam.png b/detail_png/Shaft_00139_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7f8ca2fa1558204ca7d0c5428a629b81b6ebee4d --- /dev/null +++ b/detail_png/Shaft_00139_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a61be5c09419fa82567f7d2841bd0883f9e7aeaa820a912e842192cbb2eaac2 +size 25258 diff --git a/detail_png/Shaft_00139_length.png b/detail_png/Shaft_00139_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1c87f425acfc6c644ef37b57becd0d2250aa1cb2 --- /dev/null +++ b/detail_png/Shaft_00139_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:368f19bfb2065c4738b506821dcd7af77a341868bf4d153689abfe203992f325 +size 34222 diff --git a/detail_png/Shaft_00139_title.png b/detail_png/Shaft_00139_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a139a8a703489fd1e06d912e9206496b94795225 --- /dev/null +++ b/detail_png/Shaft_00139_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18f3f31a605d5710b7e57f70f3b4e72affa4106394c6e450b3d513f8b6ae842b +size 29519 diff --git a/detail_png/Shaft_00142_diam.png b/detail_png/Shaft_00142_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..108ae4e2589a6fe87030a2426457fec522924f17 --- /dev/null +++ b/detail_png/Shaft_00142_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1405d58d11d9715600cf7ac24c28dfd07dd2a682b1734d9439043c14949b8cb +size 19760 diff --git a/detail_png/Shaft_00142_length.png b/detail_png/Shaft_00142_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6da2f2398a6c6d563e215265bac3e5173603c8cd --- /dev/null +++ b/detail_png/Shaft_00142_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58fe050b8c7e31943d554ee0c794cde23e221420f22adb222cecf922b7893f97 +size 17431 diff --git a/detail_png/Shaft_00142_title.png b/detail_png/Shaft_00142_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e22c7b9c07133d89a338cb8ebf40dbe9f3346da2 --- /dev/null +++ b/detail_png/Shaft_00142_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dea20fc3601d0ad3fe664c6404d60dc9d5cb1a35249e85a8929f0f6da961d46 +size 24889 diff --git a/detail_png/Shaft_00145_diam.png b/detail_png/Shaft_00145_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..72b0cecfac75b61a6b4ff6bca84ff2ae5e261f59 --- /dev/null +++ b/detail_png/Shaft_00145_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc9cc999ea9beb9af3be1608349ca9d996486300c4695ac7cec9d103d61fa3cf +size 32194 diff --git a/detail_png/Shaft_00145_length.png b/detail_png/Shaft_00145_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5ba204320173bc1faaae355ebd54f272339d64ec --- /dev/null +++ b/detail_png/Shaft_00145_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8802ba06a0f268c6b5adab772b1ce48d760cec694231970e938d49f0742d0983 +size 35119 diff --git a/detail_png/Shaft_00145_title.png b/detail_png/Shaft_00145_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0920128a367ee392a2fa6319c8e3561d24cdae26 --- /dev/null +++ b/detail_png/Shaft_00145_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fb5132202322bc8df2c7f55907c6e8ad4fcebdc61f015c451d688f85541ba84 +size 34740 diff --git a/detail_png/Shaft_00148_diam.png b/detail_png/Shaft_00148_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2291f2748760a98ebfdae89d1261af8cd9c17afd --- /dev/null +++ b/detail_png/Shaft_00148_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e3e121793034fc86db9ad513845ab43e839dec0ef554f100ff02ba83276bf83 +size 31049 diff --git a/detail_png/Shaft_00148_length.png b/detail_png/Shaft_00148_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e99f87a458a70e02d5c6d115504113ed39a7021 --- /dev/null +++ b/detail_png/Shaft_00148_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4867e98a7b19922cc20e25ce9c006c7988c1ad076543288ebe821e9467168e71 +size 35168 diff --git a/detail_png/Shaft_00148_title.png b/detail_png/Shaft_00148_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6aa18f2e7a3281d691608a0c16eb14103d7ecfd9 --- /dev/null +++ b/detail_png/Shaft_00148_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:556206dc39e6669eed53df3bb7da1aa63037537534358fbb9355aed73ed2c873 +size 28644 diff --git a/detail_png/Shaft_00154_diam.png b/detail_png/Shaft_00154_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..457f7dbdfcab38279aa3153767f723ce4e5dd678 --- /dev/null +++ b/detail_png/Shaft_00154_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d3b8d7ff7b975515e5c08dfc460e42af694250386c1940d95f0fdd98e562987 +size 20125 diff --git a/detail_png/Shaft_00154_length.png b/detail_png/Shaft_00154_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d91b2ef58f1b8817d189c0ac1f749db391d06afa --- /dev/null +++ b/detail_png/Shaft_00154_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63992b649e15377052a8c734772310baf8eff1a497c157963f1e593930c87aa6 +size 16164 diff --git a/detail_png/Shaft_00154_title.png b/detail_png/Shaft_00154_title.png new file mode 100644 index 0000000000000000000000000000000000000000..26a62c5be821d645a79085d0ac08e869c83243b5 --- /dev/null +++ b/detail_png/Shaft_00154_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b60a181ce9bf87b3e41f0e2fee4dfdfe477c74ba50f5d428350b10e4a66e0d2 +size 15693 diff --git a/detail_png/Shaft_00155_diam.png b/detail_png/Shaft_00155_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..93dcad352f8b9fbd5925753bf3ed49ce0ae3fbf6 --- /dev/null +++ b/detail_png/Shaft_00155_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aabb58ed68a9ad00bf8f2d826a5762d614c6534958511d95c2cc4cd829bb437a +size 25463 diff --git a/detail_png/Shaft_00155_length.png b/detail_png/Shaft_00155_length.png new file mode 100644 index 0000000000000000000000000000000000000000..18524dada215e820187b75ef34ff2f9a1553776c --- /dev/null +++ b/detail_png/Shaft_00155_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c2ed402d99e16139da620993a4a05ab3231569c47908f619f0df4185b087544 +size 35803 diff --git a/detail_png/Shaft_00155_title.png b/detail_png/Shaft_00155_title.png new file mode 100644 index 0000000000000000000000000000000000000000..091f4444eb2156eb1de244ca1ad4927fdf222355 --- /dev/null +++ b/detail_png/Shaft_00155_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e27e77677b9190dc49d3f5d9550540813ed06625c730bd42f12cc8e162f1cb80 +size 35279 diff --git a/detail_png/Shaft_00158_diam.png b/detail_png/Shaft_00158_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7154be2394a8932ec8b1eb348c4fee69f05a70cf --- /dev/null +++ b/detail_png/Shaft_00158_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b52c97a7a22f66f5d0c6537b65983426e0a30e28c869c945fc78f21b6054896 +size 17703 diff --git a/detail_png/Shaft_00158_length.png b/detail_png/Shaft_00158_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3961e65d19676ba1fc3054b410e39353d0bfd1d1 --- /dev/null +++ b/detail_png/Shaft_00158_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f94fbb5baa9c231e899292dd65798d50c59a312b703ce99eec88b1535e5299d +size 17271 diff --git a/detail_png/Shaft_00158_title.png b/detail_png/Shaft_00158_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bee97a8a56933a498a29e78d97df89eca93824f4 --- /dev/null +++ b/detail_png/Shaft_00158_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83a4705fd908a02090f60fb37857daa8bad6e5a79f33ee1b037d52c168d95c27 +size 22032 diff --git a/detail_png/Shaft_00159_diam.png b/detail_png/Shaft_00159_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bf4a469281e5a19013ca953a17087b7f09adebcb --- /dev/null +++ b/detail_png/Shaft_00159_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:867a4cb72b38d9f018b8709d07f776b3f4db4e796e10cf05ff81511f0ff93005 +size 34411 diff --git a/detail_png/Shaft_00159_length.png b/detail_png/Shaft_00159_length.png new file mode 100644 index 0000000000000000000000000000000000000000..716e75060d612f144e799337254c9e7700acb144 --- /dev/null +++ b/detail_png/Shaft_00159_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:808a1ab7cbf0363794e2e76a6791fc7fd9ff0d19576f5e797fa6bf5ad6699f88 +size 34030 diff --git a/detail_png/Shaft_00159_title.png b/detail_png/Shaft_00159_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a6b95c0d42ca68eeafed82320d4db493514012b3 --- /dev/null +++ b/detail_png/Shaft_00159_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ad227daadf12ed6d6fed47c16eb140d1eca1e1d998b9cb691b49c1289cfc241 +size 32114 diff --git a/detail_png/Shaft_00160_diam.png b/detail_png/Shaft_00160_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..70b88bb5e18bd884f14214f1520483b1978a15df --- /dev/null +++ b/detail_png/Shaft_00160_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23e03e67e00b7f14290d0046ae07553341c37fa0b425d80d9a2436c14cd4253a +size 19107 diff --git a/detail_png/Shaft_00160_length.png b/detail_png/Shaft_00160_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ecb61ec29fb8e56f128eb04921a41e2b8424d60b --- /dev/null +++ b/detail_png/Shaft_00160_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:727caf5c1d3e59cc7e014a409d36f6d187e31999f3a2602de4e4387d143b9003 +size 14804 diff --git a/detail_png/Shaft_00160_title.png b/detail_png/Shaft_00160_title.png new file mode 100644 index 0000000000000000000000000000000000000000..48c7a49a53cc8ddde09579bfe23aad3453a2a3bd --- /dev/null +++ b/detail_png/Shaft_00160_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b61cbe3d0fd0edb8c4a7026e6c3072e618239c22e7c731b457da72bf2684e70 +size 16308 diff --git a/detail_png/Shaft_00162_diam.png b/detail_png/Shaft_00162_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ce15a3b203302c7eff993eb166da84b4a23826f9 --- /dev/null +++ b/detail_png/Shaft_00162_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9ef840ebe041e34940ebd0f9f568eb6ef4ab19b2de14fd18206523f75422eb6 +size 28171 diff --git a/detail_png/Shaft_00162_length.png b/detail_png/Shaft_00162_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c1d1894058a2ea90d778b4ac720033b434946f65 --- /dev/null +++ b/detail_png/Shaft_00162_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6e463a2d7847fc9b092dc6955c3a4add8333a014854f26784e4b993272a3f53 +size 21186 diff --git a/detail_png/Shaft_00162_title.png b/detail_png/Shaft_00162_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42d905e0a5900d37eb8e6d8a7905acab8edbe3bc --- /dev/null +++ b/detail_png/Shaft_00162_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09639455eba6adb566b1bf622b05924ab39ebdd2b595188d190ab80a95fada95 +size 25206 diff --git a/detail_png/Shaft_00165_diam.png b/detail_png/Shaft_00165_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8beaf64d605170a8ba7789e0d1fb618636540dfc --- /dev/null +++ b/detail_png/Shaft_00165_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e961e873cf6304b087fa5fa731ba1e9ca82a88b5d5d58dd4e2494307c7de24af +size 25728 diff --git a/detail_png/Shaft_00165_length.png b/detail_png/Shaft_00165_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6b41c23574bfeb986d7d6e350bcfc3b1871d1efe --- /dev/null +++ b/detail_png/Shaft_00165_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92e2ecb23f89834a14d0574b83400924c079068e4115a6a89b6733e3ff100b15 +size 18537 diff --git a/detail_png/Shaft_00165_title.png b/detail_png/Shaft_00165_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0a026790a4b4d1f220a87eef75ac231fa050936b --- /dev/null +++ b/detail_png/Shaft_00165_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:007c1fbcb7d974857fe22f033a379a592ad4376dc7ef847fc3ae4f5e734fcac7 +size 18633 diff --git a/detail_png/Shaft_00166_diam.png b/detail_png/Shaft_00166_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0d8191e50a79ef3ec6e8c83c9925a87fcf5a3908 --- /dev/null +++ b/detail_png/Shaft_00166_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c97ccd1ef05d8364b52af924295bb58a44ffa93f701e5d62d5f415b8c59a84e5 +size 30538 diff --git a/detail_png/Shaft_00166_length.png b/detail_png/Shaft_00166_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d7c2f1239b82de99d136cee83e9a8f16148edf9d --- /dev/null +++ b/detail_png/Shaft_00166_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b6169698486b50bb78919d45091be35dca0a32d0aa3b5ca4f50f8eed721b52c +size 23936 diff --git a/detail_png/Shaft_00166_title.png b/detail_png/Shaft_00166_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c7473980c0b5b46d938ba7f03cc0cc015850ae58 --- /dev/null +++ b/detail_png/Shaft_00166_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d5c9c3db2193d993b420d47f27ea0e0c7556ace4c0a7f64cf6e3a7b1e542c89 +size 22747 diff --git a/detail_png/Shaft_00168_diam.png b/detail_png/Shaft_00168_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..37121fa2d6869c0bda2ca3be4052caca66603c3b --- /dev/null +++ b/detail_png/Shaft_00168_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eef01c9329d31a58c2bed4eb3aa7b67a9f2210ac7ed06fda37c060be49639bab +size 25606 diff --git a/detail_png/Shaft_00168_length.png b/detail_png/Shaft_00168_length.png new file mode 100644 index 0000000000000000000000000000000000000000..def6e56524742cb1f879a5157247be0d5501d914 --- /dev/null +++ b/detail_png/Shaft_00168_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f798e3cc8919ba6a47ac772e4e5397bf777a2ee53e6b30188e4719c4b8edc14c +size 19666 diff --git a/detail_png/Shaft_00168_title.png b/detail_png/Shaft_00168_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c7e1944db9b782ebe480d16f52f3f8a880479536 --- /dev/null +++ b/detail_png/Shaft_00168_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:affd141206855d1ce9a4528b28a63a1b3ec3dd462e1d3cd112b7d8536c4c32c3 +size 30075 diff --git a/detail_png/Shaft_00169_diam.png b/detail_png/Shaft_00169_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..618649bedfc6ae0f44fdde620b5fe3affec4fd6a --- /dev/null +++ b/detail_png/Shaft_00169_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3a90ee9a385f186751643ed4567397356d165a33baded2e90564a2a22e2e322 +size 32825 diff --git a/detail_png/Shaft_00169_length.png b/detail_png/Shaft_00169_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f41870c26288a5c004c08673b607dc02afeeb54 --- /dev/null +++ b/detail_png/Shaft_00169_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7f57aaa1e0cd87d75e5c67958ccf367148445b331ba45162bb0afbe0eaa5480 +size 43675 diff --git a/detail_png/Shaft_00169_title.png b/detail_png/Shaft_00169_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5f48c085a16ee6702dc547a7235c310aa0fd0360 --- /dev/null +++ b/detail_png/Shaft_00169_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aef559611e534153de84f32a09c222ff98beadbf7004c94cd17a3ffd18dc4560 +size 30051 diff --git a/detail_png/Shaft_00175_diam.png b/detail_png/Shaft_00175_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a9101b9eb6ade2bb20e630140ddb4f2f34ee4926 --- /dev/null +++ b/detail_png/Shaft_00175_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03a0ca26b9c398ee38e34171d1ddbfb47e506d86a1625889ed5a195dedc5d938 +size 18526 diff --git a/detail_png/Shaft_00175_length.png b/detail_png/Shaft_00175_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ee77f97148384f5333459801b68697efbe88d774 --- /dev/null +++ b/detail_png/Shaft_00175_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d009c779ac3cb94ca885f2059df79802ce515c258e4651500a5b42aae69eb0b5 +size 17442 diff --git a/detail_png/Shaft_00175_title.png b/detail_png/Shaft_00175_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7a35ca1f0eaf7342db41cc06073042f9b4fa1bd6 --- /dev/null +++ b/detail_png/Shaft_00175_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a361cf84f9f2adaa7ec5367e473e906ff0f4d96dd7773f1ec646a1fac807911 +size 34467 diff --git a/detail_png/Shaft_00176_diam.png b/detail_png/Shaft_00176_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4be0e7a2e8307072880cf5673c2f180bad94f650 --- /dev/null +++ b/detail_png/Shaft_00176_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd36324c91241658a7417c5c12beeff1d25eae13d8b5045367e02dd13d6da5a0 +size 20931 diff --git a/detail_png/Shaft_00176_length.png b/detail_png/Shaft_00176_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fef17aa2ca1fbcd3c76f53147f31a1c8315aa754 --- /dev/null +++ b/detail_png/Shaft_00176_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84f53866c8a2b1a2c5765f4010bb4fe02c531d504393973a0b81093d915f0782 +size 29246 diff --git a/detail_png/Shaft_00176_title.png b/detail_png/Shaft_00176_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0094a8b6732a700bcd4ec3dccfce5d95ac8d6880 --- /dev/null +++ b/detail_png/Shaft_00176_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9d5e97d325e2863292bdfaa519532438b941dec55739d7a571ca31e8340858b +size 28697 diff --git a/detail_png/Shaft_00183_diam.png b/detail_png/Shaft_00183_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5c033b4a080d3cae97381f5944b7f6d8876bdd6e --- /dev/null +++ b/detail_png/Shaft_00183_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cc41f2e37a2abb261389c73b86be1f415fcdeaa2623d29f6c2722edbc981546 +size 26913 diff --git a/detail_png/Shaft_00183_length.png b/detail_png/Shaft_00183_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9f94fec7a559ca412364f00ac60b90a4634ef9ac --- /dev/null +++ b/detail_png/Shaft_00183_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:604958b1be9714003ed0b6d53764d1623cd2dc0578ca14d6a1ed3307c575fa8c +size 28112 diff --git a/detail_png/Shaft_00183_title.png b/detail_png/Shaft_00183_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bfa303792158f28032f3eaf278586f8aa94742e5 --- /dev/null +++ b/detail_png/Shaft_00183_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2d433f1f1d5af59baae789ee482710ed78c7586215b8966e42b3fd4b4149e20 +size 32067 diff --git a/detail_png/Shaft_00187_diam.png b/detail_png/Shaft_00187_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f8945b641c0d18433c069035498414c1795bf459 --- /dev/null +++ b/detail_png/Shaft_00187_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f732ddd86ccca9fa2b382a44341866978449a53fc9f353c51d6b751954350f2 +size 26013 diff --git a/detail_png/Shaft_00187_length.png b/detail_png/Shaft_00187_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9cc9789bac0cb26c389d3d32ea5c1495d2e6f4db --- /dev/null +++ b/detail_png/Shaft_00187_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80ff7b1379a11c66c4eff7b7f0b12acbaaed43af7c3d52cad782d438af2469ba +size 29296 diff --git a/detail_png/Shaft_00187_title.png b/detail_png/Shaft_00187_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f28e880a28bff78be62f9264c1d5a6a3fa65d789 --- /dev/null +++ b/detail_png/Shaft_00187_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52ab1179553c045342aea7b75bf87c26cc20390903ba9b5eebe226bd0ef7a20d +size 31379 diff --git a/detail_png/Shaft_00188_diam.png b/detail_png/Shaft_00188_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bda2460fad3bb3abe7e8c4558a534d380185dc66 --- /dev/null +++ b/detail_png/Shaft_00188_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2049edc1a68a4adcde238447800135fc83fdf09fc1985cc9bdae7fb7f89e0fa2 +size 24424 diff --git a/detail_png/Shaft_00188_length.png b/detail_png/Shaft_00188_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac31efd5854091f82e1f6de4184c1629dc96e46d --- /dev/null +++ b/detail_png/Shaft_00188_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a7aff680a575b0c6d1e1ba3c68c0bf951e67687fe502aed29869156a59a7b72 +size 34275 diff --git a/detail_png/Shaft_00188_title.png b/detail_png/Shaft_00188_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8f7f0b0f16caeb9adfccc01c1aec5698b4f458d1 --- /dev/null +++ b/detail_png/Shaft_00188_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16115a91945d6b0a03ea204f42259ad9f1a79a218eac83cedda77cf848c6ee68 +size 32608 diff --git a/detail_png/Shaft_00191_diam.png b/detail_png/Shaft_00191_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3672bfcc6f423a07172cc2bc0bb214502b01c509 --- /dev/null +++ b/detail_png/Shaft_00191_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00e49ca9aafb55a3e3de49a2fad480bcffac3d0ff2b3ca8209dfa50b7894c095 +size 23214 diff --git a/detail_png/Shaft_00191_length.png b/detail_png/Shaft_00191_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e561ea153932fa5dc91e33baa767e50d8739cf2d --- /dev/null +++ b/detail_png/Shaft_00191_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6c9146bef65afb41af74a8cf1a8920ce907d33295458f001e7b223487d5cc5c +size 21085 diff --git a/detail_png/Shaft_00191_title.png b/detail_png/Shaft_00191_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51d3be57529d624961f798b69256eb313dbf772c --- /dev/null +++ b/detail_png/Shaft_00191_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f581e0be8e232dcbd26a6c8d2931587d7a36563f724ce0fd3c286c27dc20ad8 +size 24349 diff --git a/detail_png/Shaft_00192_diam.png b/detail_png/Shaft_00192_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bc6141de73024c3c206787a2afdcb58ecd5ff2f0 --- /dev/null +++ b/detail_png/Shaft_00192_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e025ab33fb15bc580d63935a558975bd6b353340efd39fff954470a7a1c03aa1 +size 20664 diff --git a/detail_png/Shaft_00192_length.png b/detail_png/Shaft_00192_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c3072a775ad4c495532c293be1cd95dc313ca93a --- /dev/null +++ b/detail_png/Shaft_00192_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ad4f82630acb7997fd627fa652a7b08279567e890988358ea0882ac82fcd672 +size 17816 diff --git a/detail_png/Shaft_00192_title.png b/detail_png/Shaft_00192_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ac5dff5ba2db9fe7d14c9ae58ccdf1cf9ed3cf66 --- /dev/null +++ b/detail_png/Shaft_00192_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9144a04e3fd8fe83d8ef3dce319f45d934516c39f89414d2470e7ea66608ef70 +size 22010 diff --git a/detail_png/Shaft_00197_diam.png b/detail_png/Shaft_00197_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5601690222ccb0bbc876a663e3a419a354785b9d --- /dev/null +++ b/detail_png/Shaft_00197_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0964a7f9fcdbc56e0841b0bc3031c1fe663b351c20f025d5152349ade032d14 +size 30726 diff --git a/detail_png/Shaft_00197_length.png b/detail_png/Shaft_00197_length.png new file mode 100644 index 0000000000000000000000000000000000000000..38b3228efbaf4cb2a818ba231b4f714dd2e3350a --- /dev/null +++ b/detail_png/Shaft_00197_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b06766ea977259ed878c8c4d8d92ccab5ad98635e733df3f17b57c3e8232940 +size 37895 diff --git a/detail_png/Shaft_00197_title.png b/detail_png/Shaft_00197_title.png new file mode 100644 index 0000000000000000000000000000000000000000..43b05822491f2f466dfff0b05adb765cfbb0c29e --- /dev/null +++ b/detail_png/Shaft_00197_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b18212d1c62d56d45bd93045eaec221134b1c7ab6c5bc5356845e79c036308ef +size 29613 diff --git a/detail_png/Shaft_00203_diam.png b/detail_png/Shaft_00203_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a5e04a6bd1902cdb85a823f50090ff8ed40ff454 --- /dev/null +++ b/detail_png/Shaft_00203_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd1f3921873781a13587c90cbd2f82c4718422122df69632f932fe5306dc8e55 +size 25009 diff --git a/detail_png/Shaft_00203_length.png b/detail_png/Shaft_00203_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9445edc0e5c86413205c4f7d0c57576da1549a06 --- /dev/null +++ b/detail_png/Shaft_00203_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7959db0d4a26b7b47a877fba607f62ce03f4dc07396956b2fd46d3528fb42b7c +size 20200 diff --git a/detail_png/Shaft_00203_title.png b/detail_png/Shaft_00203_title.png new file mode 100644 index 0000000000000000000000000000000000000000..784b3767bac2ccab3e41bd54748ecc16fd142e69 --- /dev/null +++ b/detail_png/Shaft_00203_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7310e0aa61e7afab027cdadba04010a75602a05e502c76c2c6902a431887953b +size 17069 diff --git a/detail_png/Shaft_00205_diam.png b/detail_png/Shaft_00205_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2bfbceeb3cc54768687d7776d45c456437b35d47 --- /dev/null +++ b/detail_png/Shaft_00205_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44c556725c7a401d9bdd082e2862854908b894194e0006b855f53b00d49928e8 +size 28022 diff --git a/detail_png/Shaft_00205_length.png b/detail_png/Shaft_00205_length.png new file mode 100644 index 0000000000000000000000000000000000000000..366f1dd30b0859f6c3eec0af073f272de8414822 --- /dev/null +++ b/detail_png/Shaft_00205_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1857106ed46f1bee18385e861210feff6e87a9ac3425a4c3b813ee79d3130302 +size 22554 diff --git a/detail_png/Shaft_00205_title.png b/detail_png/Shaft_00205_title.png new file mode 100644 index 0000000000000000000000000000000000000000..125b950d3c53afbd04226dde5ded57a4fc94edec --- /dev/null +++ b/detail_png/Shaft_00205_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:154d30235c743d2618de2e2fdab563921e87a8aeeb424feab9cd5edcc56277d1 +size 18787 diff --git a/detail_png/Shaft_00207_diam.png b/detail_png/Shaft_00207_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0f135674a235048a6155d2245ffdd6a5d5e4561e --- /dev/null +++ b/detail_png/Shaft_00207_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9b3161fe7c64f6957a0d4c2d038d9e1d48e67b79644e257c39a37c33bc020e2 +size 19828 diff --git a/detail_png/Shaft_00207_length.png b/detail_png/Shaft_00207_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2d5d287d5f328466da1f3c7f9751ba37278228f3 --- /dev/null +++ b/detail_png/Shaft_00207_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ef76342b2f3a0f046481f860460ba19af5c4ec41d942ff7b68a514a0986c3ee +size 22158 diff --git a/detail_png/Shaft_00207_title.png b/detail_png/Shaft_00207_title.png new file mode 100644 index 0000000000000000000000000000000000000000..77e86480996fb0cafc7b2c4e35ed27c45f03eb66 --- /dev/null +++ b/detail_png/Shaft_00207_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5315a963b873a6970dbb2befc6a91c1cdf7e4b0df7330795fa5d9d5d514807d +size 35453 diff --git a/detail_png/Shaft_00210_diam.png b/detail_png/Shaft_00210_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bf1ebbc8d74d8ccb154cc51f582cca10fb9ee5e5 --- /dev/null +++ b/detail_png/Shaft_00210_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b33243420b2d4bb2c776c2f2465dfd676f4c9afa7395b1050c071dc58b32dc6f +size 36076 diff --git a/detail_png/Shaft_00210_length.png b/detail_png/Shaft_00210_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1ea95e2704a0b54d0674d7374bd7121d37297991 --- /dev/null +++ b/detail_png/Shaft_00210_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d28663a92f8a7924ed6cb218554d0f386a966b44c8aa5152f7721beef1ea2a62 +size 50591 diff --git a/detail_png/Shaft_00210_title.png b/detail_png/Shaft_00210_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1cce48e1e7d7e6d3d969983c9580dc47e3f647b9 --- /dev/null +++ b/detail_png/Shaft_00210_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8db7ed1fdfb2eaf8f416d644ca7449efc762425823cb0b9411e679fa0d509bf4 +size 29073 diff --git a/detail_png/Shaft_00218_diam.png b/detail_png/Shaft_00218_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..538c98609fe1feb1cec39394c95940b1c83eaa1f --- /dev/null +++ b/detail_png/Shaft_00218_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c099e76cda7df20232b5b8ac859df0ee582b2bc3b4bf98333d139f6bac4a1dd9 +size 25070 diff --git a/detail_png/Shaft_00218_length.png b/detail_png/Shaft_00218_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c6d05b00dd58abac0da9d0cadc8578d72dda0ef0 --- /dev/null +++ b/detail_png/Shaft_00218_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc111c99b9b686eaaa1da835e6fc6438c879c7a8c36e5ad562da8e728265863b +size 21003 diff --git a/detail_png/Shaft_00218_title.png b/detail_png/Shaft_00218_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3c808a5686ade2a0e903a77f71d4be7eeb65c333 --- /dev/null +++ b/detail_png/Shaft_00218_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f3b2b9861797e12e7c6b769b39a5dbb41df2673dbf46925c03626940c7f7430 +size 26785 diff --git a/detail_png/Shaft_00219_diam.png b/detail_png/Shaft_00219_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d1891372aeb1e1383a264c438c88a284f1a3d478 --- /dev/null +++ b/detail_png/Shaft_00219_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc19f9253d535c2fcae6ca61b6a22ba4a3c7e82d416ee64e67e4231b86708764 +size 18731 diff --git a/detail_png/Shaft_00219_length.png b/detail_png/Shaft_00219_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3173f8752b3a12f9e2a32dc97ba1a4c14784d4b0 --- /dev/null +++ b/detail_png/Shaft_00219_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06eba82d5594b5234fa1a634b1f38e243729172806feedf8753310e0abe33662 +size 15707 diff --git a/detail_png/Shaft_00219_title.png b/detail_png/Shaft_00219_title.png new file mode 100644 index 0000000000000000000000000000000000000000..008023fe81b156cf43aabd6c652363358f3dd527 --- /dev/null +++ b/detail_png/Shaft_00219_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:046a1ed954910693d1fe97c8005bdbccd36af89dd278fa5560d78b6de1cca274 +size 14314 diff --git a/detail_png/Shaft_00224_diam.png b/detail_png/Shaft_00224_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..92758c3a21aa929e740c1931d8da5189522f6139 --- /dev/null +++ b/detail_png/Shaft_00224_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fcdb57fca49d9f675003efdb8b9603ee7972598a51d3319fdab3e39c7fbf88c +size 25358 diff --git a/detail_png/Shaft_00224_length.png b/detail_png/Shaft_00224_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2349440095ad894467dc954e4f277c2cb067d65b --- /dev/null +++ b/detail_png/Shaft_00224_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b45552cd40b3dc2423248dc38b7c6b194497ef268736ef7043a5c738f9f448dc +size 20048 diff --git a/detail_png/Shaft_00224_title.png b/detail_png/Shaft_00224_title.png new file mode 100644 index 0000000000000000000000000000000000000000..229eace50ab1f2d1be78fce6e5cafc22a9b5e542 --- /dev/null +++ b/detail_png/Shaft_00224_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d94f472a44628c656c54853f764b76775c0d2cb9a3f0b3838a1e592fda52c262 +size 18814 diff --git a/detail_png/Shaft_00228_diam.png b/detail_png/Shaft_00228_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..054f0901451292313d0d157bc34c13375d3b675d --- /dev/null +++ b/detail_png/Shaft_00228_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77d46240d57d042866ef45205361882715fe2b2de66e18a7445077c2b949d158 +size 27319 diff --git a/detail_png/Shaft_00228_length.png b/detail_png/Shaft_00228_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9b001e794a74e714917998fef54c6489741de33c --- /dev/null +++ b/detail_png/Shaft_00228_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7af8890f1d2bf238044a355750c747ef2c772f103e0380af16151020e110ba19 +size 32764 diff --git a/detail_png/Shaft_00228_title.png b/detail_png/Shaft_00228_title.png new file mode 100644 index 0000000000000000000000000000000000000000..782871929a2b785140d40ead4e2dc6cd7df21671 --- /dev/null +++ b/detail_png/Shaft_00228_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23c1a788ddcbf12b711d85e3d2e6cee8238f4b7e405f42509815e515a3dc8b58 +size 32818 diff --git a/detail_png/Shaft_00230_diam.png b/detail_png/Shaft_00230_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9e994e0bed4d352492f10d5ef0c000eea76912b8 --- /dev/null +++ b/detail_png/Shaft_00230_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:551c84b4affc0f350f0edeac5831a6f624577a8955fc83d7bed10b31c4a51e63 +size 24119 diff --git a/detail_png/Shaft_00230_length.png b/detail_png/Shaft_00230_length.png new file mode 100644 index 0000000000000000000000000000000000000000..334e2eb3578ab98f4affe5ce2b2a6c00b8a0aa27 --- /dev/null +++ b/detail_png/Shaft_00230_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7865f981cf9129ae6e3e603c30e40842a904fa2feace1612e97d11ff823deafa +size 22456 diff --git a/detail_png/Shaft_00230_title.png b/detail_png/Shaft_00230_title.png new file mode 100644 index 0000000000000000000000000000000000000000..496b283e873937e5e55a74ac4b710d80b6553c70 --- /dev/null +++ b/detail_png/Shaft_00230_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10d409cfff5aba3f9db937e8ee0b52a8949acf4adde9dcdfda416ebcc1af198f +size 29447 diff --git a/detail_png/Shaft_00231_diam.png b/detail_png/Shaft_00231_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1f665d8b2afc0104dba1bd6af98692ef738c7f78 --- /dev/null +++ b/detail_png/Shaft_00231_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6c0f48d68f5e7aecd9e745022a1dba497c85d4aa7b3b8eedcfb3da3dbd29fc7 +size 31069 diff --git a/detail_png/Shaft_00231_length.png b/detail_png/Shaft_00231_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a079357c13e8a6c18e767b53e4767cfd00aba52c --- /dev/null +++ b/detail_png/Shaft_00231_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:588ae4459662630ce803f199c4b987a1e3a8e8b81cadd0029fcbf0f2fffcb7fb +size 40431 diff --git a/detail_png/Shaft_00231_title.png b/detail_png/Shaft_00231_title.png new file mode 100644 index 0000000000000000000000000000000000000000..497f33b1f12cbf670242117e5854c7ba247c337f --- /dev/null +++ b/detail_png/Shaft_00231_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3442d3fc14d32f8b6e511ba651e673e06ac8180271725098c4a135a8a953616 +size 29058 diff --git a/detail_png/Shaft_00234_diam.png b/detail_png/Shaft_00234_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..968f36a708adefd8a02c97ccadeea45550c82cd7 --- /dev/null +++ b/detail_png/Shaft_00234_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c80c069833defcd19cba5e34078fffebf0581c744d6e6da5774ffa4216dd19f +size 19282 diff --git a/detail_png/Shaft_00234_length.png b/detail_png/Shaft_00234_length.png new file mode 100644 index 0000000000000000000000000000000000000000..215f26b63f2087e5ecb19167f1fafaab7b1696ce --- /dev/null +++ b/detail_png/Shaft_00234_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5be2b28766388543e47d3e25ece6c2f4517a94027175c93f535e38238a6eb5fc +size 17771 diff --git a/detail_png/Shaft_00234_title.png b/detail_png/Shaft_00234_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b1293f822361eaac3796efc8bc81f521b4e01593 --- /dev/null +++ b/detail_png/Shaft_00234_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3444ca2725b7127cdb6af2e4b0e1bfc3cccdaf40f694432fa5d5f9d55b43219d +size 22209 diff --git a/detail_png/Shaft_00235_diam.png b/detail_png/Shaft_00235_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a29900eed69ee64bfe41b7a3ab1f8b3f376d86e --- /dev/null +++ b/detail_png/Shaft_00235_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d34d3f94240d85d3c3f4635aa8d48a77e6c2615b2643e7a14ffef35babf7aa14 +size 30152 diff --git a/detail_png/Shaft_00235_length.png b/detail_png/Shaft_00235_length.png new file mode 100644 index 0000000000000000000000000000000000000000..86cf8b84f829dd65e4adba237fd0a048bf86a69a --- /dev/null +++ b/detail_png/Shaft_00235_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2f18b655829edb9892713cebab938a8b9079c7fc02fea5cb405b19c1e7752a2 +size 25866 diff --git a/detail_png/Shaft_00235_title.png b/detail_png/Shaft_00235_title.png new file mode 100644 index 0000000000000000000000000000000000000000..80ac40861294300590ea8cda45bcaa99547647d9 --- /dev/null +++ b/detail_png/Shaft_00235_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5dff1ad08b15a9de1562c9d374d43025227012857a92dda9d5dbad24751cbd3 +size 24694 diff --git a/detail_png/Shaft_00237_diam.png b/detail_png/Shaft_00237_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f68f57df78714f976284eb51f71c413fd300165f --- /dev/null +++ b/detail_png/Shaft_00237_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d3f5988bbf3e9c1a2d41f3ff5893a4293afc8a6f317ccf19060f709248b0167 +size 35049 diff --git a/detail_png/Shaft_00237_length.png b/detail_png/Shaft_00237_length.png new file mode 100644 index 0000000000000000000000000000000000000000..45e99fa0c6b66a78ea39748afc42bdd147767b6c --- /dev/null +++ b/detail_png/Shaft_00237_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0236977b511f43405b77ab4c1d1274becc54565b1439a86b4eb60b4c0071e099 +size 29483 diff --git a/detail_png/Shaft_00237_title.png b/detail_png/Shaft_00237_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1e4277ad4fae12e3d597c222eecd31319013a56d --- /dev/null +++ b/detail_png/Shaft_00237_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7826d095c3da283f341ef0ae5da418b98dd021061c0360ada67d76a07fa73553 +size 32614 diff --git a/detail_png/Shaft_00244_diam.png b/detail_png/Shaft_00244_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8a20d3c7bdf63f9d01481b6a5d8432974008e826 --- /dev/null +++ b/detail_png/Shaft_00244_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f80e9f5ff497fb2d87dc9a0e87505c296720ef3a5199efad4945c9b2e50744f4 +size 37195 diff --git a/detail_png/Shaft_00244_length.png b/detail_png/Shaft_00244_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e3e6c39129801e200f37a8aaa914fc48311bcf2 --- /dev/null +++ b/detail_png/Shaft_00244_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e6a9b00c3eff0709a53efac6142c3b39a51a4f02b7b4706ca68016dcdad5122 +size 53664 diff --git a/detail_png/Shaft_00244_title.png b/detail_png/Shaft_00244_title.png new file mode 100644 index 0000000000000000000000000000000000000000..67a8ea195e3cbb7730f717d44b65840844ad4cf9 --- /dev/null +++ b/detail_png/Shaft_00244_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56b1f86d09a26c2a949288209caba3909bcce87c2b0eacf362bc39d9794aa241 +size 35813 diff --git a/detail_png/Shaft_00246_diam.png b/detail_png/Shaft_00246_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fd63c51f2ffb0eceb014a26f68392be9fd1c2379 --- /dev/null +++ b/detail_png/Shaft_00246_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd03c1255e55930de88582d1f184dde8ba082613f2ae0dbdb1cfce0c338cdc6f +size 25195 diff --git a/detail_png/Shaft_00246_length.png b/detail_png/Shaft_00246_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a47f270028045d0fd0f60794980111f2547ee61b --- /dev/null +++ b/detail_png/Shaft_00246_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b6a9320d792b2fdbafefab9d7ac7f16b4bf0580bc73d9b0db3c1f73c44e1cc9 +size 28682 diff --git a/detail_png/Shaft_00246_title.png b/detail_png/Shaft_00246_title.png new file mode 100644 index 0000000000000000000000000000000000000000..04659391501b1ed203848bbb7d83da7b3a1e8694 --- /dev/null +++ b/detail_png/Shaft_00246_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1055ffb76ca1c54ab28fc2e4ed892fa3ad07ccdbaeed1a40b812e971df65a33d +size 29303 diff --git a/detail_png/Shaft_00249_diam.png b/detail_png/Shaft_00249_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d19348a2689a5c4bffebb2f5a6a0760b54d648da --- /dev/null +++ b/detail_png/Shaft_00249_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97603b95bc9bc3d43008cbf10fb7a7d0cd170049c87a488691fd1c65ff7dfffa +size 28319 diff --git a/detail_png/Shaft_00249_length.png b/detail_png/Shaft_00249_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d2d2f694f283d90599fe24214c9516bbbb765e6 --- /dev/null +++ b/detail_png/Shaft_00249_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e5665922402d8fa35ea6d12fdc14e8abdb51edf1ad9c6baa898927152d12e2c +size 24178 diff --git a/detail_png/Shaft_00249_title.png b/detail_png/Shaft_00249_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9b1a84db4aa532d02c836414f219b1ea89df92b5 --- /dev/null +++ b/detail_png/Shaft_00249_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:374dc9da0baddbe03dc6a3ce5bc3a445744d6c0e31d41bb2b9cad4e8265b1d13 +size 31323 diff --git a/detail_png/Shaft_00252_diam.png b/detail_png/Shaft_00252_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..18217e158472c3b6a38373d793917925824931c2 --- /dev/null +++ b/detail_png/Shaft_00252_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b193cd12d0e4808023027f0480c6efc7c770df20b374b3dc7b7d65cae49e82c9 +size 36189 diff --git a/detail_png/Shaft_00252_length.png b/detail_png/Shaft_00252_length.png new file mode 100644 index 0000000000000000000000000000000000000000..58057562462409cac8bf6f93539d82709c83856b --- /dev/null +++ b/detail_png/Shaft_00252_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:141b8768bda7dedac6d290ba0f5a46b0a95cc8255b68c3010160de3e6945aaaf +size 43758 diff --git a/detail_png/Shaft_00252_title.png b/detail_png/Shaft_00252_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1dbb833f892e024a36469c1eea8086d38e5a1351 --- /dev/null +++ b/detail_png/Shaft_00252_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3615f7d7c91f96577b5c927f397b0bb2f2ec736f75ad5e26f773b3b4c371f334 +size 30389 diff --git a/detail_png/Shaft_00256_diam.png b/detail_png/Shaft_00256_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f9f02a950d5f7fb6349820ccff679808e817e2ad --- /dev/null +++ b/detail_png/Shaft_00256_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c00466d7d399a05d3a5bfe94f772c58c110efbe5a75d26da7a62611c05ec9863 +size 24019 diff --git a/detail_png/Shaft_00256_length.png b/detail_png/Shaft_00256_length.png new file mode 100644 index 0000000000000000000000000000000000000000..56a82bf360c97d0fe6fb79993e364653c3234628 --- /dev/null +++ b/detail_png/Shaft_00256_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26a3084fd647a8526b2dffc5531fe84fc398155976a9fb1ab599b298be7610e0 +size 31463 diff --git a/detail_png/Shaft_00256_title.png b/detail_png/Shaft_00256_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8bc25b902dd6e4bf5a2423cc089c3afd2d7d6ba1 --- /dev/null +++ b/detail_png/Shaft_00256_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:515a0d380ccb8acfba3d5ba64e8419734cfeb5508feabc0d9a1d2a706b624dfb +size 30112 diff --git a/detail_png/Shaft_00257_diam.png b/detail_png/Shaft_00257_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..32145307a79c85104e6e3adb0b0f4f117d183532 --- /dev/null +++ b/detail_png/Shaft_00257_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:913e8de222e237b2b07cfa80d7474f3eb6dbc428dc8e2b2c6167da25b6642e98 +size 28438 diff --git a/detail_png/Shaft_00257_length.png b/detail_png/Shaft_00257_length.png new file mode 100644 index 0000000000000000000000000000000000000000..22c76e91fbdea525dcd4d0015f4a4c425eadf8ca --- /dev/null +++ b/detail_png/Shaft_00257_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f13d20cedab9e66413b46f4bc4b04587b84edebda48a1c8e0cdcf970e0da05ac +size 26314 diff --git a/detail_png/Shaft_00257_title.png b/detail_png/Shaft_00257_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c0b8141a960a4d915f8367801382e15496185868 --- /dev/null +++ b/detail_png/Shaft_00257_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cdd2c2b70071c7e3e1daa4a89742eec1ff834492a0581182a248e79b91d0b65 +size 31796 diff --git a/detail_png/Shaft_00258_diam.png b/detail_png/Shaft_00258_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9fb9bde5ae7c3e1883bbb9d314f3fedc9c8ec548 --- /dev/null +++ b/detail_png/Shaft_00258_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32f55d66f2d267015b2964456d3eb1aa03e55a472dee736ea7ca5c0a671372ff +size 35307 diff --git a/detail_png/Shaft_00258_length.png b/detail_png/Shaft_00258_length.png new file mode 100644 index 0000000000000000000000000000000000000000..820948266ff713187cef3e5efe39a32276f5a14a --- /dev/null +++ b/detail_png/Shaft_00258_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c948be2f4a8edda468f00fbe55528b3e01677509a4a8b8f9a77686cc14e697e +size 49688 diff --git a/detail_png/Shaft_00258_title.png b/detail_png/Shaft_00258_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dbc18d2c1164651400b03dc62713213cd4eb4069 --- /dev/null +++ b/detail_png/Shaft_00258_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8abe389c0de2fb91f77ca7395ebe42154ad41cd30371fba01d9891db58752b1a +size 33615 diff --git a/detail_png/Shaft_00263_diam.png b/detail_png/Shaft_00263_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..550c2ae5507eb5bf6df7efa379c47df4acd8413c --- /dev/null +++ b/detail_png/Shaft_00263_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:698ff9ba85d162a6b5c34dde043b25314a2b8a9df9cccd78847a89df6d459b86 +size 26866 diff --git a/detail_png/Shaft_00263_length.png b/detail_png/Shaft_00263_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c723dcf31623e74eb4e8c55d810e6bb7da3d0ac2 --- /dev/null +++ b/detail_png/Shaft_00263_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1eeafa2e082b8fd2757f8f5d83316e25cca8f50c3fda1a9d66d465b5fddfa97 +size 35131 diff --git a/detail_png/Shaft_00263_title.png b/detail_png/Shaft_00263_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2089ac35fcc7e93bfbb032f43ad8c6cc7d52c55 --- /dev/null +++ b/detail_png/Shaft_00263_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e33385480653c9b2e90dbc17e525206ddd1ca7b3909590ec9ead6dbe2b0764b4 +size 33394 diff --git a/detail_png/Shaft_00269_diam.png b/detail_png/Shaft_00269_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9f25158676a31845397be0e4ce84ede6b2c7d3f8 --- /dev/null +++ b/detail_png/Shaft_00269_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:add2254f8854105bec6fb044f8bc5dca840603f876d70d64056f829874d99801 +size 26131 diff --git a/detail_png/Shaft_00269_length.png b/detail_png/Shaft_00269_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a90f2626eeb8379f46f0a3454ee1af758cb8363 --- /dev/null +++ b/detail_png/Shaft_00269_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee8baba361161214b2bda65f3ef61abc4de14279291bcb80cb284f528da9728c +size 27395 diff --git a/detail_png/Shaft_00269_title.png b/detail_png/Shaft_00269_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4b28daad23cd1b14f597fed98425d5c57a800f21 --- /dev/null +++ b/detail_png/Shaft_00269_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60d87f5ce4cf7ea8f9693cea58eca112a8e432b7baed2ad80c45538a374edb6b +size 33053 diff --git a/detail_png/Shaft_00271_diam.png b/detail_png/Shaft_00271_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..13b7d22d0beb114514f14a8ef4ecfa2cf0e2ea4d --- /dev/null +++ b/detail_png/Shaft_00271_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc63c1530e598871d5d15728fd435b77f3dbc304976e1da3d77d6f60bf2b23f9 +size 25529 diff --git a/detail_png/Shaft_00271_length.png b/detail_png/Shaft_00271_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d842cccaa194ea42b4596f02e263c5d2ad740ac9 --- /dev/null +++ b/detail_png/Shaft_00271_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ad8b21b478aca89351bff727235659831b72e7f86fb0086a1a8d4d350d3f7e9 +size 26933 diff --git a/detail_png/Shaft_00271_title.png b/detail_png/Shaft_00271_title.png new file mode 100644 index 0000000000000000000000000000000000000000..74593765d9715f4c9442dd8c020a3f8e6ffb9968 --- /dev/null +++ b/detail_png/Shaft_00271_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03ea5519424bb9cf1ec2944a9ddd968b830d8f508944909fc9f102f97eb2130e +size 28151 diff --git a/detail_png/Shaft_00274_diam.png b/detail_png/Shaft_00274_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4aa7857ea1b279394b29c3a88bb48f21d34a24d7 --- /dev/null +++ b/detail_png/Shaft_00274_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69cace3db2510a87bde3818390ff37c4b5979b1c7a586c9e2c86689752276fa6 +size 26021 diff --git a/detail_png/Shaft_00274_length.png b/detail_png/Shaft_00274_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a45368a838857470086adb010697330ec5334007 --- /dev/null +++ b/detail_png/Shaft_00274_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55ef17adec092403250ce237d6b01583f55df3ec8f8d92d05a3064648264d761 +size 22210 diff --git a/detail_png/Shaft_00274_title.png b/detail_png/Shaft_00274_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3e669135f0b51c8910ec92751847f86e48e7f731 --- /dev/null +++ b/detail_png/Shaft_00274_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08480d4920a406bd848d9f1b4b20fd5eaa1c8221c0d2b5fa8fd87359700558d8 +size 25767 diff --git a/detail_png/Shaft_00275_diam.png b/detail_png/Shaft_00275_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..438e5283b436b43d76bf86ad66e0112cccebc0ba --- /dev/null +++ b/detail_png/Shaft_00275_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d04a3af1a46efddae7cb8935efdc1b71dd1087d9f1641b277798b8d7fe07f60 +size 34208 diff --git a/detail_png/Shaft_00275_length.png b/detail_png/Shaft_00275_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5c43d16ec6e8073ecabc357e225884464645d3da --- /dev/null +++ b/detail_png/Shaft_00275_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e96046de8cfd7800ed905219dd29417e54da207f19467e06654d66e5fbcc0492 +size 28567 diff --git a/detail_png/Shaft_00275_title.png b/detail_png/Shaft_00275_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7f6ebdaf03b106f72621467b5f86243fff9a6627 --- /dev/null +++ b/detail_png/Shaft_00275_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b426828f748dfefd7722123b436909026098d1433618daa73bbd879f0d038713 +size 23691 diff --git a/detail_png/Shaft_00276_diam.png b/detail_png/Shaft_00276_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..79d39f81ad1c7c57aee9f797da41bdaa976553aa --- /dev/null +++ b/detail_png/Shaft_00276_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42c81b8ab68b1bd52b538d6047a7aa894e75b294814b949ec9148d84a834832e +size 20341 diff --git a/detail_png/Shaft_00276_length.png b/detail_png/Shaft_00276_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0aebc22535a57a1b22c54d779436c94a75b3dd22 --- /dev/null +++ b/detail_png/Shaft_00276_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39911da8246d7fac363f2013258df085c8398085e5abc5c2a6488353610296b3 +size 15716 diff --git a/detail_png/Shaft_00276_title.png b/detail_png/Shaft_00276_title.png new file mode 100644 index 0000000000000000000000000000000000000000..71a5abc74601bd5ddbbe8c610a4bc229f8695ea0 --- /dev/null +++ b/detail_png/Shaft_00276_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14b3be91fe3342790b2e97612e70fbfc526eb81a53cce7be4342307df0295aa2 +size 19531 diff --git a/detail_png/Shaft_00278_diam.png b/detail_png/Shaft_00278_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..01535b3efecf814287ef53f28b07e79e144acf72 --- /dev/null +++ b/detail_png/Shaft_00278_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24610426d3160e5703962da1f571449efdbbfe60a0fc1012db3c12f15409988b +size 23158 diff --git a/detail_png/Shaft_00278_length.png b/detail_png/Shaft_00278_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a2d2dea82fd78fa72f28865949f39274a6e80eeb --- /dev/null +++ b/detail_png/Shaft_00278_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f3c81cedc48cfe9a84cbd3503690510699ff0723b966ffc46f4834d5da683f8 +size 19654 diff --git a/detail_png/Shaft_00278_title.png b/detail_png/Shaft_00278_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7f0331f7c1ed7e46665be2e6bbc7c8c3fdd4d2c9 --- /dev/null +++ b/detail_png/Shaft_00278_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:577e8b2d14c0919824a480ca86191938cdbd006b1f40812263c2e60ad5c2ebe8 +size 18873 diff --git a/detail_png/Shaft_00281_diam.png b/detail_png/Shaft_00281_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eda32040c1810806c98e9d59188dccd1326e509c --- /dev/null +++ b/detail_png/Shaft_00281_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6d045ca2e123714748b89abf11b032be3ddd7eac762db29f1875db37c681d3c +size 28197 diff --git a/detail_png/Shaft_00281_length.png b/detail_png/Shaft_00281_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7a962217d5c4e4bacaaf6de11ed113386cc0caa --- /dev/null +++ b/detail_png/Shaft_00281_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d5331c3ebac0749bc36b1dc9e8c2ff3d20b99db3e0b9dd246e488bd49413e15 +size 23507 diff --git a/detail_png/Shaft_00281_title.png b/detail_png/Shaft_00281_title.png new file mode 100644 index 0000000000000000000000000000000000000000..22005cd55454c6f2e4adc6171d7d80044cb2f9b6 --- /dev/null +++ b/detail_png/Shaft_00281_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:902f488a8e7d71f1914a7f467b329d090348f5e31e81dee2512ddc85cfb78c91 +size 25569 diff --git a/detail_png/Shaft_00283_diam.png b/detail_png/Shaft_00283_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..577ed7c7f9646e1511ca7519da6235382838ac5d --- /dev/null +++ b/detail_png/Shaft_00283_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00de478cadf796df4de087d67fbcd48b56b4462e729361b3205f995cda92790b +size 27257 diff --git a/detail_png/Shaft_00283_length.png b/detail_png/Shaft_00283_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cea2a1018ea69661a0cbb72bb3b5ee13f3af2a2e --- /dev/null +++ b/detail_png/Shaft_00283_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f694c946d6d4414895a5cb7319576106a2de6ce09ef1eebdd8b663bfd28f1e61 +size 38685 diff --git a/detail_png/Shaft_00283_title.png b/detail_png/Shaft_00283_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5b178859c1bc63cc1d204a199d6a24e641bbb806 --- /dev/null +++ b/detail_png/Shaft_00283_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:073953220b2b0aa32d37931bbf3d3366ac7c923be0f5852d13da876310e6cd32 +size 31036 diff --git a/detail_png/Shaft_00287_diam.png b/detail_png/Shaft_00287_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8af0778237c59e0caaa59f19462fdc0410f91f61 --- /dev/null +++ b/detail_png/Shaft_00287_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2c8c52b5b665e9cc1b39727cf37fe2baa7fd37ec52a166d747fc03e6b3480d1 +size 19539 diff --git a/detail_png/Shaft_00287_length.png b/detail_png/Shaft_00287_length.png new file mode 100644 index 0000000000000000000000000000000000000000..de83e12110a0e1291d3d4f8e7b89ce5908ec963b --- /dev/null +++ b/detail_png/Shaft_00287_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:facb3751cdf5a175543c3e470bab0a6da4fda188c6f77127e4a6bfa1391bab81 +size 15640 diff --git a/detail_png/Shaft_00287_title.png b/detail_png/Shaft_00287_title.png new file mode 100644 index 0000000000000000000000000000000000000000..56737b14f6ac70b7e3bfb4381758d1f203063721 --- /dev/null +++ b/detail_png/Shaft_00287_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:981de5666b30561505cba85004b3b92f6aaf2d0de6b02236022a84ba99761bc7 +size 15812 diff --git a/detail_png/Shaft_00289_diam.png b/detail_png/Shaft_00289_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f57c3ad2b1e30e63415ae2f7eb10f1354888786a --- /dev/null +++ b/detail_png/Shaft_00289_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4a3bc64460a5d2c02b5bc0eb00341b9d3b243fd0b478b4e59ee2339bffb3734 +size 35181 diff --git a/detail_png/Shaft_00289_length.png b/detail_png/Shaft_00289_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5b122f2a366da6a66db33795a877f8af0f1a2d2f --- /dev/null +++ b/detail_png/Shaft_00289_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e92f93c8f49321f9f4d8ed53279349b589f00388660b0b1bf63e33a73678604b +size 41200 diff --git a/detail_png/Shaft_00289_title.png b/detail_png/Shaft_00289_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a404bda62aab8c81b2cf6598bcb0668454a0d8db --- /dev/null +++ b/detail_png/Shaft_00289_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6f5224db0326594fb2351156cbe045250279a79a0b132ebecc0e8ae63c3aa7e +size 30576 diff --git a/detail_png/Shaft_00290_diam.png b/detail_png/Shaft_00290_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8ec0e86234c762bc10b89bee91cc2c8afb997ae4 --- /dev/null +++ b/detail_png/Shaft_00290_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b8eaae2e4516255e4c791a0880150fa1326352cfb9a1f92c4f1ae43a07e34a2 +size 25539 diff --git a/detail_png/Shaft_00290_length.png b/detail_png/Shaft_00290_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a6958413ab356b2194b866adda1789ff6ba4de62 --- /dev/null +++ b/detail_png/Shaft_00290_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b04befbc314ed8fca6c822b45b6083a3ab9a239b1571c709ba140b9ca79d40f4 +size 25793 diff --git a/detail_png/Shaft_00290_title.png b/detail_png/Shaft_00290_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f957e0d7e43a9c58018d2a96f39ee1c786e231c4 --- /dev/null +++ b/detail_png/Shaft_00290_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92a09fb56a3dfd26b67bad0c23b50e3343d619d29d51a8993805880574570c12 +size 32484 diff --git a/detail_png/Shaft_00293_diam.png b/detail_png/Shaft_00293_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7a5cd8edf75ede07dcd60efc23a1eb0b22728f79 --- /dev/null +++ b/detail_png/Shaft_00293_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66305f1fba000119f62ea44b09dc72734fc3b781945a59d3d0c94ce5cc5d8b6f +size 37768 diff --git a/detail_png/Shaft_00293_length.png b/detail_png/Shaft_00293_length.png new file mode 100644 index 0000000000000000000000000000000000000000..282344f2b0a4d60a855771fa8b1185b4c1c6f105 --- /dev/null +++ b/detail_png/Shaft_00293_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a39342bb72c8de9e5183b04614d6a5cd1314cb5bf3f1d174b4ca64b2f595057 +size 33548 diff --git a/detail_png/Shaft_00293_title.png b/detail_png/Shaft_00293_title.png new file mode 100644 index 0000000000000000000000000000000000000000..73af759438020ad1823511b34bd694793c125817 --- /dev/null +++ b/detail_png/Shaft_00293_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78a27197f94314559a118821ba19d50eccd69c3bcbc83e97df8cd790595196b7 +size 36194 diff --git a/detail_png/Shaft_00297_diam.png b/detail_png/Shaft_00297_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..31a497c4a8b7b3efe1eced8ee26293064e1bdbe1 --- /dev/null +++ b/detail_png/Shaft_00297_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba14be833cf32a42030c34abbbdace9247a3208432a96fe01ab927aedbefcef4 +size 25301 diff --git a/detail_png/Shaft_00297_length.png b/detail_png/Shaft_00297_length.png new file mode 100644 index 0000000000000000000000000000000000000000..edf7bf74d2d21ad41580b8e57300e60143d65987 --- /dev/null +++ b/detail_png/Shaft_00297_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc26c6714acbab05f59f0306f50d7f8e9a45db37eaef9e3006307c23ccc2b08d +size 26392 diff --git a/detail_png/Shaft_00297_title.png b/detail_png/Shaft_00297_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8fc5e5dd9327d6194bb52458fee27ded4edbebf0 --- /dev/null +++ b/detail_png/Shaft_00297_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e837f7bdd2b021b4c31fcaacf37350e0bfc4e52bc479748b333c57583cd3cdc2 +size 32176 diff --git a/detail_png/Shaft_00298_diam.png b/detail_png/Shaft_00298_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e7b55dfc4d6f713a883ceccab984247e6756861a --- /dev/null +++ b/detail_png/Shaft_00298_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:593bb90097574998917d375c326becc5c343c312dac18eef3be35318f9b2f292 +size 25379 diff --git a/detail_png/Shaft_00298_length.png b/detail_png/Shaft_00298_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c2f2b1a1cc4068963d4b5233c34633ad7a5b94c1 --- /dev/null +++ b/detail_png/Shaft_00298_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07376397d2103c32952c0cc33942c0f0ae98b02d064847aa53ec05f30f724991 +size 23063 diff --git a/detail_png/Shaft_00298_title.png b/detail_png/Shaft_00298_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dc1a33e5397a86c49489e88753dcdc3f397172bf --- /dev/null +++ b/detail_png/Shaft_00298_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fa10938f220cdef933533fd65c09d18bb796839e6c9c4e49700850b97108784 +size 35864 diff --git a/detail_png/Shaft_00304_diam.png b/detail_png/Shaft_00304_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2020011368c4d6eaac69234cbd691e2d5e9a3af8 --- /dev/null +++ b/detail_png/Shaft_00304_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:658ed1dbadb0a0b35a86d8a1613f02acfdee5e91ac9815c476afba87bc1867ec +size 31309 diff --git a/detail_png/Shaft_00304_length.png b/detail_png/Shaft_00304_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0266e416cbfa309b0f38e35febdfbf4f2c696e6c --- /dev/null +++ b/detail_png/Shaft_00304_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9cae9126f60e960383ee8421c59c7d7240944cb4dcf20604e75b3816992bf78 +size 31007 diff --git a/detail_png/Shaft_00304_title.png b/detail_png/Shaft_00304_title.png new file mode 100644 index 0000000000000000000000000000000000000000..20a6b9ca23cf5dd352e7f938509c3fec1d31f117 --- /dev/null +++ b/detail_png/Shaft_00304_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48f3a3461551081113e5f36df5ee49944b213f95320d6eb84f56f24b80cac05a +size 29127 diff --git a/detail_png/Shaft_00305_diam.png b/detail_png/Shaft_00305_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e1d517492d338a91fef3efb7d861d423a7aa4183 --- /dev/null +++ b/detail_png/Shaft_00305_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32e177b8d3feaa0555a376e91a6eb54360b1d575e4baae1477a64d60c055d9e0 +size 20523 diff --git a/detail_png/Shaft_00305_length.png b/detail_png/Shaft_00305_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cd95e285afb8509b7d9208f3d04fa47009b78a4e --- /dev/null +++ b/detail_png/Shaft_00305_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d1d08ed4e85a359430aadf06c4f95267a3ea9926ffc865004178157532fff33 +size 16130 diff --git a/detail_png/Shaft_00305_title.png b/detail_png/Shaft_00305_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1cce7596d48f27f03a7b9a29f3594254c0f74ce9 --- /dev/null +++ b/detail_png/Shaft_00305_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55f4a08e3792880bd9fe08563a319067ce1cbbb5c97ea21a2e04b2ddbf94a848 +size 18678 diff --git a/detail_png/Shaft_00311_diam.png b/detail_png/Shaft_00311_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5573ee067087d1df05b90983c83f463b8c885639 --- /dev/null +++ b/detail_png/Shaft_00311_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90346102b2670f79d0391d9ff7a526dd16f5a31df7fb77cfc346f48be264b166 +size 20070 diff --git a/detail_png/Shaft_00311_length.png b/detail_png/Shaft_00311_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bea29bd986fe5dfcdd3a04c4344d47292d5f9347 --- /dev/null +++ b/detail_png/Shaft_00311_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cb9e02b9c78ee834f7a9ea60734c796d9e5468731d708622a57f3144b671b74 +size 15414 diff --git a/detail_png/Shaft_00311_title.png b/detail_png/Shaft_00311_title.png new file mode 100644 index 0000000000000000000000000000000000000000..187b1ba6114d59eb0148d88d5572d736347773d7 --- /dev/null +++ b/detail_png/Shaft_00311_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a79344652f3a7d02aa5538d3fdd38b64e5411e1b98b215ec3461b39891d0468a +size 16871 diff --git a/detail_png/Shaft_00312_diam.png b/detail_png/Shaft_00312_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2347047731e7574f7e83cc1929d53990cd9b484c --- /dev/null +++ b/detail_png/Shaft_00312_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bc5000c378645355d8df17e241a17fdab2e58fe4368691cb63e4e50aecf1118 +size 19445 diff --git a/detail_png/Shaft_00312_length.png b/detail_png/Shaft_00312_length.png new file mode 100644 index 0000000000000000000000000000000000000000..27f03e8007012281ce0cf92e7bc3675185f4e71c --- /dev/null +++ b/detail_png/Shaft_00312_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8cfff65ba5ca61739038cd0604c5b4e097deb03f4060b8f8f4fa92a4aa3f077 +size 16225 diff --git a/detail_png/Shaft_00312_title.png b/detail_png/Shaft_00312_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eda7a2fa6114acf00e46066cc3d89b2071d09855 --- /dev/null +++ b/detail_png/Shaft_00312_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c3e84916c033f0289a5a0d7794d67614cb03345b94e1a581aee4be5882fff07 +size 30280 diff --git a/detail_png/Shaft_00313_diam.png b/detail_png/Shaft_00313_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..66d15aef5507185727600b09fef3b01901c4c9f7 --- /dev/null +++ b/detail_png/Shaft_00313_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63f8f8edb43333a38cc503c48a232e0295bf54378357e40874c8b4a73b3bee72 +size 27551 diff --git a/detail_png/Shaft_00313_length.png b/detail_png/Shaft_00313_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d4423695f89bca57bb6f4a02e3931f78ce73930d --- /dev/null +++ b/detail_png/Shaft_00313_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec67d95d4d23c8681674969dd29e63ce073f861ab8f3a64e8f6fe1dac1c81f8b +size 38767 diff --git a/detail_png/Shaft_00313_title.png b/detail_png/Shaft_00313_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e60162e3fe40b2b69e4f1a45490724f9f1f4d2b5 --- /dev/null +++ b/detail_png/Shaft_00313_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94875f4e759a6adc607718e0826cc3c4b76f92853aeb07218242b6b9069889d5 +size 35970 diff --git a/detail_png/Shaft_00318_diam.png b/detail_png/Shaft_00318_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0493a640df8a093facd278578725740c9a510f38 --- /dev/null +++ b/detail_png/Shaft_00318_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a727c816dfd1661c1f9beeb2c0a756e151c5b63316f1e073971d64e398d35119 +size 35465 diff --git a/detail_png/Shaft_00318_length.png b/detail_png/Shaft_00318_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d09aa29cf21df8b370f7a55c8f30547b750f34e5 --- /dev/null +++ b/detail_png/Shaft_00318_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:687e635fe11c6a58c311f420068af28f70afd7a7d78b31a583b5228b7dd78869 +size 32526 diff --git a/detail_png/Shaft_00318_title.png b/detail_png/Shaft_00318_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29b7f7c7b0fd5b04aa896081c651770cd9080a38 --- /dev/null +++ b/detail_png/Shaft_00318_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:239f9d4d3c083ac9c28ec9d5b9673beb21d81d110f8ec1c00076f649ad2a4677 +size 30148 diff --git a/detail_png/Shaft_00324_diam.png b/detail_png/Shaft_00324_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a911e5b83e0a65eb3dbcb004c6e2a51436ac9f83 --- /dev/null +++ b/detail_png/Shaft_00324_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f92805eaa3104363742578ef1e0376c1f9c6e9e5fe799091843d53c07079fa6 +size 30890 diff --git a/detail_png/Shaft_00324_length.png b/detail_png/Shaft_00324_length.png new file mode 100644 index 0000000000000000000000000000000000000000..182bfcb2243ca16420238eea62ac1a35abbd4539 --- /dev/null +++ b/detail_png/Shaft_00324_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16772de2541641111cdad293901326e3dde51206cffe99446e5c83402a665893 +size 36170 diff --git a/detail_png/Shaft_00324_title.png b/detail_png/Shaft_00324_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a2785f83edff3e8e31f3732d93cc84148de05d9b --- /dev/null +++ b/detail_png/Shaft_00324_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ae5b35a99909c9da7843158b061a2459935baa7c3e78ee72983c6886836858b +size 29162 diff --git a/detail_png/Shaft_00331_diam.png b/detail_png/Shaft_00331_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d3f831917972aed99cd60695f17428e5efaa3d9e --- /dev/null +++ b/detail_png/Shaft_00331_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cf5760e24e0b6aa0d3f3532e4c48f3dd7dc6a42b8f1d9a43f2ad70067e33da2 +size 18202 diff --git a/detail_png/Shaft_00331_length.png b/detail_png/Shaft_00331_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1d8a5bf58da86df60331456e424b76521f042183 --- /dev/null +++ b/detail_png/Shaft_00331_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3812b512306ece132e075386084af3204c1a326d84041c872bde0eb7f7540dfb +size 14909 diff --git a/detail_png/Shaft_00331_title.png b/detail_png/Shaft_00331_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be6a656fd58ba4f2e0a75b40bf297df0c4701c8e --- /dev/null +++ b/detail_png/Shaft_00331_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35125a08256ba2c98173fd167dfb064b73a5c82c80c8d7a13c4c86cca588a613 +size 18728 diff --git a/detail_png/Shaft_00333_diam.png b/detail_png/Shaft_00333_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bf27300988ec786253ef7320365a50a1c9e722d5 --- /dev/null +++ b/detail_png/Shaft_00333_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08f645ef61fc092b8f54cda265a061308aa247a7247566ee9fc3542b1db4a8ca +size 28679 diff --git a/detail_png/Shaft_00333_length.png b/detail_png/Shaft_00333_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0c42ccaedfbce2824ba43738bbfe245094dc305f --- /dev/null +++ b/detail_png/Shaft_00333_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3522570e17aa4d25f2d2a5d45cca6bd1fb85b5afc0e58eb23a96ef67b94dc678 +size 30383 diff --git a/detail_png/Shaft_00333_title.png b/detail_png/Shaft_00333_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31980228ac248ae9feed01163fe46022ef235d16 --- /dev/null +++ b/detail_png/Shaft_00333_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4484ad5f23177818c9108d645c72143b752eff5cda86cf7333aad5f099b67bcc +size 33021 diff --git a/detail_png/Shaft_00336_diam.png b/detail_png/Shaft_00336_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8c06d06b85891b3ad1fb572d53771a3b7cefb6f0 --- /dev/null +++ b/detail_png/Shaft_00336_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb0ebf71d2fc5a66cbe561a6a66bdf797f152722cc5231be0b0cc80831976f0e +size 24041 diff --git a/detail_png/Shaft_00336_length.png b/detail_png/Shaft_00336_length.png new file mode 100644 index 0000000000000000000000000000000000000000..27cef8c387295823c1ba1cfa960e964df18e6509 --- /dev/null +++ b/detail_png/Shaft_00336_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68181a416e4d61fce51b59a817a53a776a71bd14686466848ac3eb7717278afa +size 32853 diff --git a/detail_png/Shaft_00336_title.png b/detail_png/Shaft_00336_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9d99876e9fb9ca02892514b73cafd0e72d7db729 --- /dev/null +++ b/detail_png/Shaft_00336_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d44310fb1d5c0dd46c0694fbae113f38c21763fa7c86469d1d20d7acd1c52b98 +size 30794 diff --git a/detail_png/Shaft_00341_diam.png b/detail_png/Shaft_00341_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6f45c634f4976a24022bb61126639eae3ae2b18a --- /dev/null +++ b/detail_png/Shaft_00341_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75954cbcaa7c588fa393a7fddbea58dbe72fda1befc4159840f94f4d7b529628 +size 19615 diff --git a/detail_png/Shaft_00341_length.png b/detail_png/Shaft_00341_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9152b920df7e68c45a62d0471cd0887264ce51c7 --- /dev/null +++ b/detail_png/Shaft_00341_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab0a5afcee9c86f97d24f4c57177ccdf3be431669ef5300fafb2e1b30b72632b +size 21247 diff --git a/detail_png/Shaft_00341_title.png b/detail_png/Shaft_00341_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2fbc07cee1b51b5950fcf00e923e4cf18c0b0b7b --- /dev/null +++ b/detail_png/Shaft_00341_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd0a57af443f700daef0bb1b8e5c331ba63ac1799b285af7e1420cc9dd3e3ce4 +size 34432 diff --git a/detail_png/Shaft_00342_diam.png b/detail_png/Shaft_00342_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..39c15c0f854edf7b034e8540f5a6ca716714c321 --- /dev/null +++ b/detail_png/Shaft_00342_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:824860c8925848cb23369f59083c4096ec2cb1fbe0c0fcd71a30a0497b456cf9 +size 32640 diff --git a/detail_png/Shaft_00342_length.png b/detail_png/Shaft_00342_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c465feaa090b1f985992d69d10d289ca5b79351e --- /dev/null +++ b/detail_png/Shaft_00342_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b659a49445a1e4baa67deeb9e5704a723d0e5d7dc493143b9f5d5c54010fe0d +size 32872 diff --git a/detail_png/Shaft_00342_title.png b/detail_png/Shaft_00342_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cd68f2b794c69b840fb2e95595818aba1bc5c4d5 --- /dev/null +++ b/detail_png/Shaft_00342_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:276a22dbfc22272dac681b23f39cf5f610f2b3a18f8e9ab910b0c83c670ef90a +size 35603 diff --git a/detail_png/Shaft_00343_diam.png b/detail_png/Shaft_00343_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d32fa430c929b600cf522dfd1214471ed869c01 --- /dev/null +++ b/detail_png/Shaft_00343_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7d205dae0ed73dbcbc0f4959ab9d3eeddb21203d4828945a5fee910091bab5e +size 25113 diff --git a/detail_png/Shaft_00343_length.png b/detail_png/Shaft_00343_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dab9f079ff716b9e0a3c60017a1c6e15b8697ad3 --- /dev/null +++ b/detail_png/Shaft_00343_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae33d429cd69478b1e0f6c59ecd4863b7bac3de2463090afb7bfa9b08ccd4a74 +size 23754 diff --git a/detail_png/Shaft_00343_title.png b/detail_png/Shaft_00343_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9b2d2c20e4ed166dba4adf03fd18055e6d3cfffe --- /dev/null +++ b/detail_png/Shaft_00343_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06a15bb003f14a33ed54628005b50ba5457742f33254c8d5c5ada985a76fed6c +size 29820 diff --git a/detail_png/Shaft_00347_diam.png b/detail_png/Shaft_00347_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..06f39b9ea7e1d8000659f04734584e9feba99c1d --- /dev/null +++ b/detail_png/Shaft_00347_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce09f7367b71a8bd73b9ec08e2f17e5c2c3648440f780608aea2cac959985e2 +size 31917 diff --git a/detail_png/Shaft_00347_length.png b/detail_png/Shaft_00347_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bd00bde694694fa30c4a4e354ab77892d469aabe --- /dev/null +++ b/detail_png/Shaft_00347_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3870e0fb3fee288d9a5b17eb9d5e1e28ce58239b782906fd2f2bdaefdcd678fe +size 42960 diff --git a/detail_png/Shaft_00347_title.png b/detail_png/Shaft_00347_title.png new file mode 100644 index 0000000000000000000000000000000000000000..34cf4fd60f498448997a7c97f1332a550afe70a7 --- /dev/null +++ b/detail_png/Shaft_00347_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:152f5b04a91b3741d5c1db714bd7051f4b286b3bb60e8543d355eedb4acf1153 +size 29108 diff --git a/detail_png/Shaft_00353_diam.png b/detail_png/Shaft_00353_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fee7a337f794897329bfdacd859dae6e9588b5a2 --- /dev/null +++ b/detail_png/Shaft_00353_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2899ae18bf11566b1ff64c102fa7a6b143ce657f109d376dd73945585ffbce85 +size 23191 diff --git a/detail_png/Shaft_00353_length.png b/detail_png/Shaft_00353_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a2dc96976f3d0ca78130159c50e0e97d6bbb20ab --- /dev/null +++ b/detail_png/Shaft_00353_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c76d9c10db2db4c6a3757c6013599189bf57e587992234476eeff3cd0157b3c9 +size 21752 diff --git a/detail_png/Shaft_00353_title.png b/detail_png/Shaft_00353_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7bf25da938e68e8d4f98ca3059c8a1721d28bf2a --- /dev/null +++ b/detail_png/Shaft_00353_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5475d9bb84bedec2ea0150b2c2d6fadae56722cf196997cdc53680f87fb72521 +size 28586 diff --git a/detail_png/Shaft_00355_diam.png b/detail_png/Shaft_00355_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8fba97d369ddfce4c205c8cfeeffaa06543d6c43 --- /dev/null +++ b/detail_png/Shaft_00355_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb3490b35ab19eb907f81b7a15f69f0dcde97d6eab11d52a474c6dea5b7c9778 +size 42060 diff --git a/detail_png/Shaft_00355_length.png b/detail_png/Shaft_00355_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d98aeeed2746aac9af313f5d540c2f8497686a3 --- /dev/null +++ b/detail_png/Shaft_00355_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d41e8621d0d22adbfec9a06ee0c167f63517d8bb330ff0ee3a629b3d96d1f06 +size 52169 diff --git a/detail_png/Shaft_00355_title.png b/detail_png/Shaft_00355_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f6b470a0ffb8aab8307abbaba91c5f0dfbe8ad1c --- /dev/null +++ b/detail_png/Shaft_00355_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6600b9c8ffbfb185c05499a1c1af5f0155ff375c95550481d8db587d4fba32b7 +size 36539 diff --git a/detail_png/Shaft_00357_diam.png b/detail_png/Shaft_00357_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..71f6963ed6ae3ab5606c1b26e708b4f68042e46b --- /dev/null +++ b/detail_png/Shaft_00357_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0b85a9ec6da4da2009882d7504ef725d80aef5e1a0d3da2df5f66e44d924078 +size 25294 diff --git a/detail_png/Shaft_00357_length.png b/detail_png/Shaft_00357_length.png new file mode 100644 index 0000000000000000000000000000000000000000..909bf8848be5cc7c276fe097d21102b1d26083ce --- /dev/null +++ b/detail_png/Shaft_00357_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:148d4b39cf843cbbcf76242b2371e389d172e9c45e94ec3f7cdc2caec1507ca4 +size 25208 diff --git a/detail_png/Shaft_00357_title.png b/detail_png/Shaft_00357_title.png new file mode 100644 index 0000000000000000000000000000000000000000..711e8aeaa1ff0a93f0fc8d263872359663d95e7e --- /dev/null +++ b/detail_png/Shaft_00357_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51042e98b04bb9ed8bbba8ddad5e38867148abd522ceb8e53bb5338210559c94 +size 32143 diff --git a/detail_png/Shaft_00358_diam.png b/detail_png/Shaft_00358_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a2e53f4ec649159aa0aad272579216d0ccc2565 --- /dev/null +++ b/detail_png/Shaft_00358_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99049ddb39fffb3066f98e0d1a20ce1a12ace4de0bec980a96831e6ec610131a +size 32949 diff --git a/detail_png/Shaft_00358_length.png b/detail_png/Shaft_00358_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4ddb1fb2f8dda1e42e637f06c99edbb8a8d893f5 --- /dev/null +++ b/detail_png/Shaft_00358_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:384d173d328591fc2d1a9c0d10a406b6b2de487db5d87839b271a9771f3098d8 +size 33756 diff --git a/detail_png/Shaft_00358_title.png b/detail_png/Shaft_00358_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c18484ea3ba69ed6da996f7c265556cf453b7a22 --- /dev/null +++ b/detail_png/Shaft_00358_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7392072936407ded3240e0f09989b00ed3ab1fcc89ba96230633c6ee7270aea +size 36342 diff --git a/detail_png/Shaft_00366_diam.png b/detail_png/Shaft_00366_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bfcd5a0e7ed9956c548822c3af2d5edf1dd0c5c4 --- /dev/null +++ b/detail_png/Shaft_00366_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68d39c19b8c0608e2f5bfced5ec2ca958666f288ceb71f1348db4c777721d8f8 +size 25867 diff --git a/detail_png/Shaft_00366_length.png b/detail_png/Shaft_00366_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8775d770b33f73be2c1a34449ed404356ad47dfc --- /dev/null +++ b/detail_png/Shaft_00366_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:270296f8f978abf872b1be0008b335cdbf13a18f8acbf437e801994438a8d597 +size 29380 diff --git a/detail_png/Shaft_00366_title.png b/detail_png/Shaft_00366_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6405e084a4562e42650ebfc6b54028cb40d09201 --- /dev/null +++ b/detail_png/Shaft_00366_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1b5dd7f1ad5d54ef26f113c001c318b2ea9135d7f0fbe4ac1ae4ef9cb83aa87 +size 36723 diff --git a/detail_png/Shaft_00368_diam.png b/detail_png/Shaft_00368_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..084ed9d625a820ed30509d113a1d717cb4521bd4 --- /dev/null +++ b/detail_png/Shaft_00368_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f838bc933d7227e946a71a9477e7196dd319483286660cecce5fdc9debbd6aaf +size 30545 diff --git a/detail_png/Shaft_00368_length.png b/detail_png/Shaft_00368_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3748dbcc0fe6eaaa83294005885b1e2e8947ac71 --- /dev/null +++ b/detail_png/Shaft_00368_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2411842aed44b045fbe8af60c851f731834015a38a7169b7bfe63b05c2d66d5f +size 29161 diff --git a/detail_png/Shaft_00368_title.png b/detail_png/Shaft_00368_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a08d29e4448c4e9c2df485074439b6ad66c1a543 --- /dev/null +++ b/detail_png/Shaft_00368_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:186dd1afc1955ee23d6d538200444203dcebf26758afd1ad6db55d34d4f69742 +size 30863 diff --git a/detail_png/Shaft_00375_diam.png b/detail_png/Shaft_00375_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fba84115be696fd34f7f17e0fe760da3313c4be1 --- /dev/null +++ b/detail_png/Shaft_00375_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5af63837db81a8b385a9545441dc9292ff1cdfc30c134284e76fe93718554752 +size 20057 diff --git a/detail_png/Shaft_00375_length.png b/detail_png/Shaft_00375_length.png new file mode 100644 index 0000000000000000000000000000000000000000..665b53c4f777fb696cd541e16eed45a247873511 --- /dev/null +++ b/detail_png/Shaft_00375_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c8964f35d650321ed8920247afc01d3a2a4df93befa415ce9a8260272bcc8bb +size 21810 diff --git a/detail_png/Shaft_00375_title.png b/detail_png/Shaft_00375_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ec56dc5b84afa00711636ae14dc3d447a0b88b7 --- /dev/null +++ b/detail_png/Shaft_00375_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:415b85b0a0461c210abeaac52f38a0de74df1be2e328deb836ca7cd379f1a13a +size 32050 diff --git a/detail_png/Shaft_00385_diam.png b/detail_png/Shaft_00385_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..71edfe009c3568d7e2ec81919cff6b566bdb389c --- /dev/null +++ b/detail_png/Shaft_00385_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98923b902d1a5259d26761e22e3cc29f8231809ad3283835aefb5777ecbf539a +size 34795 diff --git a/detail_png/Shaft_00385_length.png b/detail_png/Shaft_00385_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0124b56db6f51ecd61d8b5bc6f86cd3cfc155549 --- /dev/null +++ b/detail_png/Shaft_00385_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7302ea67506490f33d5a410e2731e835043208d1cb8d43c59a2f38ec742629d1 +size 36778 diff --git a/detail_png/Shaft_00385_title.png b/detail_png/Shaft_00385_title.png new file mode 100644 index 0000000000000000000000000000000000000000..149dfe4dcf5e6e63ed9376b213be15fab5727349 --- /dev/null +++ b/detail_png/Shaft_00385_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f885f369fa31a668e81085aad6e91207d957731817957c6c392cac0e89798e5 +size 30025 diff --git a/detail_png/Shaft_00386_diam.png b/detail_png/Shaft_00386_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..753e1a132e1b30b0abce4116ca61c2fde0938005 --- /dev/null +++ b/detail_png/Shaft_00386_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee963b6d252ecca099efa9a645191b7825213db30c542b21aa445e14bd4c1b0a +size 27452 diff --git a/detail_png/Shaft_00386_length.png b/detail_png/Shaft_00386_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1dd0f60148aade6e183da9b3223b46f2b44db489 --- /dev/null +++ b/detail_png/Shaft_00386_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fe0b12513494fc8d98bd131e7841a99b91365aefbacb767a18d04319e39987d +size 37980 diff --git a/detail_png/Shaft_00386_title.png b/detail_png/Shaft_00386_title.png new file mode 100644 index 0000000000000000000000000000000000000000..69767deac5a977ab430fc77c460868ebd7bab3cd --- /dev/null +++ b/detail_png/Shaft_00386_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee0568bc4498c12d3b49e50046c6bbe1c763649a2a2a3f0985a6a7406a7696b5 +size 33757 diff --git a/detail_png/Shaft_00394_diam.png b/detail_png/Shaft_00394_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a04893022647b9853201ad60f78113c8e9e44d16 --- /dev/null +++ b/detail_png/Shaft_00394_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8cd5ea948458a56de5f48e8ffd3bd36c6a30ca1a6ce53033801a5d701d9a4e2 +size 24619 diff --git a/detail_png/Shaft_00394_length.png b/detail_png/Shaft_00394_length.png new file mode 100644 index 0000000000000000000000000000000000000000..74875f2a3a6aa055e1bda5a650e78d5c16dd9c29 --- /dev/null +++ b/detail_png/Shaft_00394_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f15dd7f00c50cb920d9c5dd1f48aae13b1a32ee1f57b4b2ea679aed76f1d3c07 +size 19522 diff --git a/detail_png/Shaft_00394_title.png b/detail_png/Shaft_00394_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b444b53f7b6704e241dd5be71a3bf8a2a8433297 --- /dev/null +++ b/detail_png/Shaft_00394_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d49370226c96f47b9da6113f80063f6a0ee368b5fbab75d83bb8d2b1b4719dc +size 22160 diff --git a/detail_png/Shaft_00395_diam.png b/detail_png/Shaft_00395_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..58e4f0908d4e13bd1200796b0d7cdf62e5478c76 --- /dev/null +++ b/detail_png/Shaft_00395_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:343f784c80a5e987db41fc59d4d1ecb4743113610b74bc606eb64309ac2de6e6 +size 29117 diff --git a/detail_png/Shaft_00395_length.png b/detail_png/Shaft_00395_length.png new file mode 100644 index 0000000000000000000000000000000000000000..37731586e4f1290a660a703aaee9c29812451083 --- /dev/null +++ b/detail_png/Shaft_00395_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2aa9487ca6da92df5693336c8e241de7a213bd2494d564e32f0b743a05a0850b +size 27886 diff --git a/detail_png/Shaft_00395_title.png b/detail_png/Shaft_00395_title.png new file mode 100644 index 0000000000000000000000000000000000000000..84c8d73ae6a36750c84f3075e5c6fa3205ca4613 --- /dev/null +++ b/detail_png/Shaft_00395_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2599e23a5a1fd297d9392aa8eb486684c374ca9a20a549b71641e4bfd92103e1 +size 31911 diff --git a/detail_png/Shaft_00401_diam.png b/detail_png/Shaft_00401_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0b8a95461738ef106a1917926b5e723ca3838ce6 --- /dev/null +++ b/detail_png/Shaft_00401_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db48d24aca6df550b6fa59b796d668d46f03f402b0c9cb89ab88325e18557958 +size 41077 diff --git a/detail_png/Shaft_00401_length.png b/detail_png/Shaft_00401_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f15c77056ee1588ea28693bff5f7066ab60d5cda --- /dev/null +++ b/detail_png/Shaft_00401_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb5237a03b78c7dffa2f8a60985ab14ab7f7568d5e31b61b6ae95ed4526aba3e +size 34562 diff --git a/detail_png/Shaft_00401_title.png b/detail_png/Shaft_00401_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d1ba37fed3458e9432c331d429bcf67036fa19ad --- /dev/null +++ b/detail_png/Shaft_00401_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eee15163e435a19cac3e18f0b076ed069c0756427ccbb87c075e675d0587bcdc +size 22687 diff --git a/detail_png/Shaft_00405_diam.png b/detail_png/Shaft_00405_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..77dafb18b016dc947c5d4eaa6f5f0f5dda214e4f --- /dev/null +++ b/detail_png/Shaft_00405_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b0da3cbb891f57080b66e4a0134df6c5248a1b533e663b77189d696faf24747 +size 18769 diff --git a/detail_png/Shaft_00405_length.png b/detail_png/Shaft_00405_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4c476f71cbf0cd2b96581fd01ef8cbfddae67b2a --- /dev/null +++ b/detail_png/Shaft_00405_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bacd55ba67ea86acdf6d4074e41d6b476789ce69de22ed1c29ca0bf0f5716ec +size 15689 diff --git a/detail_png/Shaft_00405_title.png b/detail_png/Shaft_00405_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29956cdbf6cc7a2ef1ca3846c26d3a22f4bbdde8 --- /dev/null +++ b/detail_png/Shaft_00405_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e07537413524ea96e5edcd510442647b722807d5a1c56e7df2cc660fd320eca +size 16682 diff --git a/detail_png/Shaft_00406_diam.png b/detail_png/Shaft_00406_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..55b41db21d9f96bb95c81052e6a81ce6c0aa7649 --- /dev/null +++ b/detail_png/Shaft_00406_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57a5ad8ec62d10e0e05749e76546983d8a0d0a67b6b8f794d13063495a70a5ae +size 34132 diff --git a/detail_png/Shaft_00406_length.png b/detail_png/Shaft_00406_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ebf3afa59c290763001a0c99705e01fe6e019bbf --- /dev/null +++ b/detail_png/Shaft_00406_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49371467150769dd9c627b185ab09a81c17ee8012dd7b15978408a49345ba0e2 +size 46086 diff --git a/detail_png/Shaft_00406_title.png b/detail_png/Shaft_00406_title.png new file mode 100644 index 0000000000000000000000000000000000000000..43c74f3dc4dae7624995cb8ea9cc787eedc7d114 --- /dev/null +++ b/detail_png/Shaft_00406_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70a12d7f415b100e5f78c88c387f3ddce283a6701e3825dbe4e77bcc107391f6 +size 33438 diff --git a/detail_png/Shaft_00413_diam.png b/detail_png/Shaft_00413_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..727523f1cfc590652637d454fe4b6440c7e81f64 --- /dev/null +++ b/detail_png/Shaft_00413_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d443f7ba05d97dbfbfbfe71bf75ecc7b2ca00fac09cce38e5d1051dc08337e0a +size 31238 diff --git a/detail_png/Shaft_00413_length.png b/detail_png/Shaft_00413_length.png new file mode 100644 index 0000000000000000000000000000000000000000..50b1065d8cc982665ee1d6c48c31ec3f691f163e --- /dev/null +++ b/detail_png/Shaft_00413_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad63ad3d69bff58277e1dd7eb9983b5e56ab641264e5c2d44471d0d4304e687e +size 42760 diff --git a/detail_png/Shaft_00413_title.png b/detail_png/Shaft_00413_title.png new file mode 100644 index 0000000000000000000000000000000000000000..55e8d8f3327011d4faf161c317ab4e6100a94a19 --- /dev/null +++ b/detail_png/Shaft_00413_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33caef31b24ce6f1dabbfe5e70f71fe6abc4865508fa9bf6da93227cdfa76cf6 +size 28775 diff --git a/detail_png/Shaft_00414_diam.png b/detail_png/Shaft_00414_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3c541240b31d7eb3c8ab311b3276dc1d546f1074 --- /dev/null +++ b/detail_png/Shaft_00414_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f94bb85ee752ac73c0de21a33febba5edc2d57ca65ab449a3842459f2c42151b +size 31810 diff --git a/detail_png/Shaft_00414_length.png b/detail_png/Shaft_00414_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8fe70f8a73ae403ac2005bf7c1ebb23a74a9b043 --- /dev/null +++ b/detail_png/Shaft_00414_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1dc5b89d1351e46adcdb75b0b9cff50f8f28dbda354417312a77fe23c73a9fc +size 46413 diff --git a/detail_png/Shaft_00414_title.png b/detail_png/Shaft_00414_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1cbfaa3ba463212631410d9e89ce93245309b784 --- /dev/null +++ b/detail_png/Shaft_00414_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c37cde70aba48a68fcb3cb489c8e00a6c6f633f50b7d27430262db6ef158749a +size 31205 diff --git a/detail_png/Shaft_00415_diam.png b/detail_png/Shaft_00415_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c954969ea3f6c6d777da187e65985a493fd567c --- /dev/null +++ b/detail_png/Shaft_00415_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d87594df49bcc58aee4a134f27cdad0040e3a4a02fc1440c1383865e2f889d0 +size 23450 diff --git a/detail_png/Shaft_00415_length.png b/detail_png/Shaft_00415_length.png new file mode 100644 index 0000000000000000000000000000000000000000..46151f7771e4e086ce00574256bd4c5ff176ef7b --- /dev/null +++ b/detail_png/Shaft_00415_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c62caee127d76795c4970cf4f4a9015c98b48c61ba0bfbe262227994e273d02 +size 20953 diff --git a/detail_png/Shaft_00415_title.png b/detail_png/Shaft_00415_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fe597e8974450227a74ce9884553303adb3ab6c4 --- /dev/null +++ b/detail_png/Shaft_00415_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6698b38c81066fd961d39f7e4ff6f1d7174b9f3ea5f4f801470cc9467f0e32df +size 18793 diff --git a/detail_png/Shaft_00416_diam.png b/detail_png/Shaft_00416_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a24333a3a6c0a130474f6382699f03fcdbf4a9f5 --- /dev/null +++ b/detail_png/Shaft_00416_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd7fadded5f62f738f0c1fd387c55eb589a48d6f7034a840e637d20cc33b4e6a +size 19269 diff --git a/detail_png/Shaft_00416_length.png b/detail_png/Shaft_00416_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d61eb95f9143e7da1d8763ad986715591c07cb06 --- /dev/null +++ b/detail_png/Shaft_00416_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2af33c85328c7421e8c70b7cbe353428d28c0a5f52bd22b7e71acc308ef161d +size 15935 diff --git a/detail_png/Shaft_00416_title.png b/detail_png/Shaft_00416_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0d9f179e17bde49a2383e77905da302d509f6cc6 --- /dev/null +++ b/detail_png/Shaft_00416_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6eaff459310107384972f7ff323ae3d5008c842d1cf65e2392a551a9c8c1b13 +size 24968 diff --git a/detail_png/Shaft_00419_diam.png b/detail_png/Shaft_00419_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0e1eb3591a28dff81a631c3185b9c07d8a3a8970 --- /dev/null +++ b/detail_png/Shaft_00419_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da03b99842f33689accc25a27f9785ae35d93e9dfebb4bd2511a2e9ddd94b160 +size 34348 diff --git a/detail_png/Shaft_00419_length.png b/detail_png/Shaft_00419_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b00759d496a1ec18cfd7ff07b218022fa5d9981f --- /dev/null +++ b/detail_png/Shaft_00419_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f38bc1a53171585d984346f6715db3a71b02ccd4a8b52ac2284f27700242cbd +size 28868 diff --git a/detail_png/Shaft_00419_title.png b/detail_png/Shaft_00419_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3fe3f6456b6e5ac46ce43be771f6ab84ac20292b --- /dev/null +++ b/detail_png/Shaft_00419_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70d98ef1edebaf9e53baf025431eb96f3833a9d85351d2c14870ab5621dc8cc0 +size 29046 diff --git a/detail_png/Shaft_00422_diam.png b/detail_png/Shaft_00422_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d12d166fd6bb07965dd01d66d69a96bc3625e84a --- /dev/null +++ b/detail_png/Shaft_00422_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a894b9ee55ac077f85fdb5f4fcdab4b9b5c26a78258bea9a6ba8a8da10e7384b +size 25972 diff --git a/detail_png/Shaft_00422_length.png b/detail_png/Shaft_00422_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2af7514a6f438c7ff1ec0f81664ccfd3a05f1234 --- /dev/null +++ b/detail_png/Shaft_00422_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02df8ad2549e0518d3b16709b3c8c50a20fd71d384eaffe6f8817c0e3577fe92 +size 20604 diff --git a/detail_png/Shaft_00422_title.png b/detail_png/Shaft_00422_title.png new file mode 100644 index 0000000000000000000000000000000000000000..08da2c0623b1a724169ad2099ef872763cdacecb --- /dev/null +++ b/detail_png/Shaft_00422_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92e626fb0157e6b356dd3750718aa576b126e5de9e170c24e0d05812faf23758 +size 22281 diff --git a/detail_png/Shaft_00425_diam.png b/detail_png/Shaft_00425_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..86eb598861797284379c49e228992deb31ff51a7 --- /dev/null +++ b/detail_png/Shaft_00425_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7363eb46b5fda9610bac4ed8707842e2188e0b6738dfca60ba2456bdd3e19299 +size 26558 diff --git a/detail_png/Shaft_00425_length.png b/detail_png/Shaft_00425_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3fb774faf734374c714baa2f88ed47b78cd0641f --- /dev/null +++ b/detail_png/Shaft_00425_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:780ac52593dd2e13af44a156a3751702ddaedc8094de1eccb1e4f6c82d276a38 +size 22182 diff --git a/detail_png/Shaft_00425_title.png b/detail_png/Shaft_00425_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aec6fe3ce2f356e2040eead91be1c89a3bbd23a1 --- /dev/null +++ b/detail_png/Shaft_00425_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a773bc91b775d0feb0953dc6c07de789dfa0ef7d6bcad9e65e8e265a56da246 +size 27572 diff --git a/detail_png/Shaft_00427_diam.png b/detail_png/Shaft_00427_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..930cc5b195b005fe8ae7bcfc3915f45db9a3374a --- /dev/null +++ b/detail_png/Shaft_00427_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3cb68b124eca58fc0d494b85ffa830cd5ac8b909daf4499f9c809c6a49551ba +size 19912 diff --git a/detail_png/Shaft_00427_length.png b/detail_png/Shaft_00427_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8d1be64f1bf8b6515000c12997832aa465990330 --- /dev/null +++ b/detail_png/Shaft_00427_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9d97607d668433f54d98f06a77285a640d2dc9ab629d967fd73fcd11b8c6f4d +size 19908 diff --git a/detail_png/Shaft_00427_title.png b/detail_png/Shaft_00427_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1d256a2037100c1d4a2310b835da345f3710d790 --- /dev/null +++ b/detail_png/Shaft_00427_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95d3336d61123c8e858d279a58b9a6b52dc3ecb1300609ba735740a631b3b5f7 +size 29333 diff --git a/detail_png/Shaft_00430_diam.png b/detail_png/Shaft_00430_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aa59368228f88046f9b49dcd66bb2c2d874fe81a --- /dev/null +++ b/detail_png/Shaft_00430_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7762f8f0883767140593ec3f2e9bbc5dc80e332e666b05884471e5dbb82708d5 +size 19642 diff --git a/detail_png/Shaft_00430_length.png b/detail_png/Shaft_00430_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1e28f1fbf6aa37b44f3e3bae2d1903910870d68a --- /dev/null +++ b/detail_png/Shaft_00430_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cc27b94a4f26728b5ed2d67670372edf0df5e8383fd7a93049d15ea96db18fc +size 17844 diff --git a/detail_png/Shaft_00430_title.png b/detail_png/Shaft_00430_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e1203b65f403d2e293d1172f93a8360e143ae679 --- /dev/null +++ b/detail_png/Shaft_00430_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e37252f5eabd1746c1130c9a5f51df06766481bae1cd359f93630cbb43282761 +size 29659 diff --git a/detail_png/Shaft_00432_diam.png b/detail_png/Shaft_00432_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..62896797a2039ef62548b5aec8bdd423617c455e --- /dev/null +++ b/detail_png/Shaft_00432_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81c8a33ea82eeaeebd9e4fe704d2d02d9656a42f83cc5eba21aac167d8281783 +size 39217 diff --git a/detail_png/Shaft_00432_length.png b/detail_png/Shaft_00432_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13e3348718c130719ba4f28cdf44e7862eacccd5 --- /dev/null +++ b/detail_png/Shaft_00432_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:884ed6126e9a57938be038f70ea2706ba970944815ae08b363cee8299d91eaa7 +size 48872 diff --git a/detail_png/Shaft_00432_title.png b/detail_png/Shaft_00432_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1df7858cbeb08767c7a5f1230a827ebfd0e34224 --- /dev/null +++ b/detail_png/Shaft_00432_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b1694383544520d3c06d8e67bd441a4a7a7e9f47caff56f0ca6c37e59b536c3 +size 30486 diff --git a/detail_png/Shaft_00435_diam.png b/detail_png/Shaft_00435_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aec10a3b92571eb80d818a99c2c44914f28a631b --- /dev/null +++ b/detail_png/Shaft_00435_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea9292ecf8cabc1510c75f03821a361ec0df7f9618b7fd286bc9b31013da6a44 +size 35803 diff --git a/detail_png/Shaft_00435_length.png b/detail_png/Shaft_00435_length.png new file mode 100644 index 0000000000000000000000000000000000000000..005d83760e23420bfb131eafc55c3b0714694e38 --- /dev/null +++ b/detail_png/Shaft_00435_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd94308effe65da68c18ecb6496e30cdd0cb033fa87e0ed1d87858fac4f1dca8 +size 37092 diff --git a/detail_png/Shaft_00435_title.png b/detail_png/Shaft_00435_title.png new file mode 100644 index 0000000000000000000000000000000000000000..39e444e21a6950ab0eeba810cf5649682e5da8a5 --- /dev/null +++ b/detail_png/Shaft_00435_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abd580799e83ff2997003e68a23c9b386de01587dd15fe4dc304861485dea866 +size 32389 diff --git a/detail_png/Shaft_00436_diam.png b/detail_png/Shaft_00436_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6a00b96a73acfebd0a1c24b370cf6fe52c5880d8 --- /dev/null +++ b/detail_png/Shaft_00436_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db1e9afd0d35bd376b10968ee4b49d467d2c8855c670e959ec0c19320cdef978 +size 29903 diff --git a/detail_png/Shaft_00436_length.png b/detail_png/Shaft_00436_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b3d7530bf7c60ea9999f41d6efb94f1e84c3b4a7 --- /dev/null +++ b/detail_png/Shaft_00436_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b914f7f19fc7cd517da1a48743ac3e0f80296bcba2e868d109006ad091886108 +size 21875 diff --git a/detail_png/Shaft_00436_title.png b/detail_png/Shaft_00436_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0e13537a2d2353e7f2bb0770718054911ff4ce8e --- /dev/null +++ b/detail_png/Shaft_00436_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86e1d40829d6645e170a230845810a5e3218a3eab54f1bb5485df327d46fe11e +size 22191 diff --git a/detail_png/Shaft_00453_diam.png b/detail_png/Shaft_00453_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1f4ed5bb95d7af89eaa51cbeafb4fa4ab51a94c2 --- /dev/null +++ b/detail_png/Shaft_00453_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb4c21a677704b9b5ec7483e7cd1bfb7b26979c15930ada39e77f903eaedab75 +size 20557 diff --git a/detail_png/Shaft_00453_length.png b/detail_png/Shaft_00453_length.png new file mode 100644 index 0000000000000000000000000000000000000000..de0bbfa5efcfbff0d2aeff3b5687aedf7a1ea32f --- /dev/null +++ b/detail_png/Shaft_00453_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ab44ef9b78a3036475e335150e529a13dcc9084704de13407be0cee32598cc6 +size 22393 diff --git a/detail_png/Shaft_00453_title.png b/detail_png/Shaft_00453_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d912fd09fe45760b91e0e507992e719e97f82107 --- /dev/null +++ b/detail_png/Shaft_00453_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95e3f4c9f7549fb1198b7db3ba79d758927197f76b83c0728829532e51c80250 +size 32028 diff --git a/detail_png/Shaft_00454_diam.png b/detail_png/Shaft_00454_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d7df7056d9a1c45704dad030c733e7f979a8351 --- /dev/null +++ b/detail_png/Shaft_00454_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a67809ce9a812faa619b166f8bf8c53b9161963a3a2c66763e5c8133957eb37 +size 18269 diff --git a/detail_png/Shaft_00454_length.png b/detail_png/Shaft_00454_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f679c28e8929601d8908b954e759e7358ea5c6ee --- /dev/null +++ b/detail_png/Shaft_00454_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d29fbc1d11447d6415a4885962645afebaa5d54537d3a73b50eb423ac6cc32fa +size 17191 diff --git a/detail_png/Shaft_00454_title.png b/detail_png/Shaft_00454_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c8ed386ae1afbb20028b8f322904234f2d7e4e22 --- /dev/null +++ b/detail_png/Shaft_00454_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f68e087d4af452979316fa9d7a5bb739640c0e65a46fffa31fd346610c6c369 +size 19126 diff --git a/detail_png/Shaft_00459_diam.png b/detail_png/Shaft_00459_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..61335769120f6d73cc2416851360d53c83273487 --- /dev/null +++ b/detail_png/Shaft_00459_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18fea3fb91c07af5d22cd77569e544c1c4acafcfd5108473e237e61f9c5df1bf +size 32950 diff --git a/detail_png/Shaft_00459_length.png b/detail_png/Shaft_00459_length.png new file mode 100644 index 0000000000000000000000000000000000000000..255cca33fe65c611f50ca8dc53dbd604741295fa --- /dev/null +++ b/detail_png/Shaft_00459_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42b63bfc0620dcf0d56398de5f1538817ea31420700bea64f7554309b9c5ed81 +size 46280 diff --git a/detail_png/Shaft_00459_title.png b/detail_png/Shaft_00459_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2136e607bba59a9cc00deb8cf1a4524e99b05937 --- /dev/null +++ b/detail_png/Shaft_00459_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fda7a7ff179f198ed488f3ff07c8d6d7bb38f6dfda63eb1bf44788e422003dd2 +size 32936 diff --git a/detail_png/Shaft_00460_diam.png b/detail_png/Shaft_00460_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3d95e32af94ccfe20f2cef8d77b070e2a6a92935 --- /dev/null +++ b/detail_png/Shaft_00460_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:835e32d1820088dc635f74928bbdc01c64e68f5dea0ab5f742e44d65bafa0c68 +size 30784 diff --git a/detail_png/Shaft_00460_length.png b/detail_png/Shaft_00460_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5628dfd0b9bf48e594645b4a1e2a59f085d12314 --- /dev/null +++ b/detail_png/Shaft_00460_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e504f4f052847de558ee2f8db7c10b5440c2a3372f3e8b99cb4fd565dbaec92 +size 23502 diff --git a/detail_png/Shaft_00460_title.png b/detail_png/Shaft_00460_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8917f9f9b332c4459e464a53b7e50b5bbf06a098 --- /dev/null +++ b/detail_png/Shaft_00460_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9861c24a7e2099eccc9e9d05add07a34cda9c093867cc09c9de72f955bc966b4 +size 26160 diff --git a/detail_png/Shaft_00461_diam.png b/detail_png/Shaft_00461_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..42a6ad3e1b7743d5c5b8b83adf5cdca141424c8c --- /dev/null +++ b/detail_png/Shaft_00461_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e3df61b6e0398ff67999e5e1d9c6b59508c591f69ffe3656f06dbf3702b134f +size 25538 diff --git a/detail_png/Shaft_00461_length.png b/detail_png/Shaft_00461_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b4989825430ba1fe5e935a91b23d0ebfe0f23fb8 --- /dev/null +++ b/detail_png/Shaft_00461_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65c17196c481376dd839ce159a1ccc4855a9a5f447253a1a9b5bf41bca585fbb +size 38258 diff --git a/detail_png/Shaft_00461_title.png b/detail_png/Shaft_00461_title.png new file mode 100644 index 0000000000000000000000000000000000000000..503eb2cfb20766f447f3f310b0174528f7371fb7 --- /dev/null +++ b/detail_png/Shaft_00461_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3dc036175e96dee6055170318f15cafb0e32003011ab2c37c128fb2ee5edb6b +size 32123 diff --git a/detail_png/Shaft_00462_diam.png b/detail_png/Shaft_00462_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c73621ea2d777c0461316c121fe2142a7faf3365 --- /dev/null +++ b/detail_png/Shaft_00462_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b484d9d6924964a2e4ad631c63e39909d6a01255d11b6622815ce3425062417e +size 26329 diff --git a/detail_png/Shaft_00462_length.png b/detail_png/Shaft_00462_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5668c6d909739fcfbef54b1254611f58d30031a9 --- /dev/null +++ b/detail_png/Shaft_00462_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e671703c45a583e2277ee4b77f1f183b94fbaa938577e494bad9db0423eb81b1 +size 24254 diff --git a/detail_png/Shaft_00462_title.png b/detail_png/Shaft_00462_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bf022a29f2ba71fb34dc18528f4fa5a8ae47e8ce --- /dev/null +++ b/detail_png/Shaft_00462_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc1ad68894b22338eef5d4d18a3469eda2e752088d67c1de9d2e320ff0f7bc52 +size 23344 diff --git a/detail_png/Shaft_00465_diam.png b/detail_png/Shaft_00465_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..010347ff9c6002268c165d00df8cd189dbdb2fce --- /dev/null +++ b/detail_png/Shaft_00465_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fde6bfadbc81abdc0d5840933268e3d6644d25ac3e9c6822c7e22392e0bb20d8 +size 35510 diff --git a/detail_png/Shaft_00465_length.png b/detail_png/Shaft_00465_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e476f56e332722d280e55d57cf244a4849c3ab48 --- /dev/null +++ b/detail_png/Shaft_00465_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffa9800b2a604b1f40a7e356a2658cfd0a5f5e1766251e1e118547f54943bf62 +size 37263 diff --git a/detail_png/Shaft_00465_title.png b/detail_png/Shaft_00465_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9ab2ac2b285888b6d2a58aeffbf9a881d619c866 --- /dev/null +++ b/detail_png/Shaft_00465_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49987fab6f6c434e79615249ed20e59860c484fd04c0ee9a1e6c40c637341542 +size 32465 diff --git a/detail_png/Shaft_00466_diam.png b/detail_png/Shaft_00466_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..88669ad0dcf310011cd3ff17ce5f6bcbd9ec08d3 --- /dev/null +++ b/detail_png/Shaft_00466_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0541ab82ca7bdbcd67ce582769a2b9a662b1a2f986d59e794c1f649b5ec9d13b +size 20307 diff --git a/detail_png/Shaft_00466_length.png b/detail_png/Shaft_00466_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b6b7803bde22efd6b3d90c3ffdc848616b9c221 --- /dev/null +++ b/detail_png/Shaft_00466_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8cae31541cf4def8c8a9b6327774dd136cd375ee3311ec30855afbd9fbfd8ec +size 18873 diff --git a/detail_png/Shaft_00466_title.png b/detail_png/Shaft_00466_title.png new file mode 100644 index 0000000000000000000000000000000000000000..900125211672b78b18c1a13edd219b96e1cdbbbf --- /dev/null +++ b/detail_png/Shaft_00466_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55d976f01fdc0a75fae5eb8ff529e458721a96efee651b21abf8a6212e268107 +size 20441 diff --git a/detail_png/Shaft_00469_diam.png b/detail_png/Shaft_00469_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f2986987ba17100203865973b4ea7bb51fb7aa0b --- /dev/null +++ b/detail_png/Shaft_00469_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84cb0c0810c57ad167ccc5af9ce32c691854f4b207422ae295b4e04863afb619 +size 28313 diff --git a/detail_png/Shaft_00469_length.png b/detail_png/Shaft_00469_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7562630880fb8031e2233e4cb13815bc264d8c6b --- /dev/null +++ b/detail_png/Shaft_00469_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebb1d50dfc6ebfb40f2eab457bf07051eb18828463b4b4bb82c12eb9810efcc8 +size 26538 diff --git a/detail_png/Shaft_00469_title.png b/detail_png/Shaft_00469_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fb5cdb72e90949ccc34c69c8fe503e5e5ac38ca0 --- /dev/null +++ b/detail_png/Shaft_00469_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03d61e261fdae8b11bbf72bdfbe368df7e3a7b9cd41596e7277a661bbfd7410c +size 31620 diff --git a/detail_png/Shaft_00473_diam.png b/detail_png/Shaft_00473_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9410bb86454b6e7a3e03bbdc5cfd944434d92d66 --- /dev/null +++ b/detail_png/Shaft_00473_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2084d4befe72b1955e69f16392fbe9a1f9e013b91951b49952f0bc93995e8dc8 +size 26195 diff --git a/detail_png/Shaft_00473_length.png b/detail_png/Shaft_00473_length.png new file mode 100644 index 0000000000000000000000000000000000000000..45932d1dc6889d9f13716b45c85dfb8ce881c931 --- /dev/null +++ b/detail_png/Shaft_00473_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b23417077a1c66a0bbc21029a2b0cb780c2f8b238c99f8f223e487e39673b5ef +size 22291 diff --git a/detail_png/Shaft_00473_title.png b/detail_png/Shaft_00473_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8da0ddbc1ebd073caf96ab43b2b9794aea5d47d6 --- /dev/null +++ b/detail_png/Shaft_00473_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55106147b9750562cdfc3dd5cab2c77543b38dfab2f453158eead1942012eb9a +size 34458 diff --git a/detail_png/Shaft_00481_diam.png b/detail_png/Shaft_00481_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d93b3c35f004f38214324d733b1d76af95740599 --- /dev/null +++ b/detail_png/Shaft_00481_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64cc5f878ee1b3ca1f9c6b6bbefec730ca3e5d10064a7d7f87f46e786b92c0a7 +size 25715 diff --git a/detail_png/Shaft_00481_length.png b/detail_png/Shaft_00481_length.png new file mode 100644 index 0000000000000000000000000000000000000000..894f52f7cad966ea748221c241ff4c42919ee0dd --- /dev/null +++ b/detail_png/Shaft_00481_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bb9a24f628886f36a636130a344ca0b107ac9960fca087f850bc659bf8a1c27 +size 28012 diff --git a/detail_png/Shaft_00481_title.png b/detail_png/Shaft_00481_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b28ac298d503d82871a534769fa2c0385e28d938 --- /dev/null +++ b/detail_png/Shaft_00481_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c264099f007f2c3a85ce7aa1a8e25318e9e2e7342af29c7c246544a3fd26b29c +size 29305 diff --git a/detail_png/Shaft_00490_diam.png b/detail_png/Shaft_00490_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e38d441aa66e2913934685dc2bc52cdc38ffcd35 --- /dev/null +++ b/detail_png/Shaft_00490_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2fb124a1c26e8a1fa2aa1b7c7a57349a8efd0ec386be451950d3f8d657aa0db3 +size 19575 diff --git a/detail_png/Shaft_00490_length.png b/detail_png/Shaft_00490_length.png new file mode 100644 index 0000000000000000000000000000000000000000..39c53c4adfc76b0bbde6d0942f2321a40ef424f5 --- /dev/null +++ b/detail_png/Shaft_00490_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c95b5ad39e632e5a40e790be7f836905a92e7894edd2f132c2f72a423a7335e +size 16302 diff --git a/detail_png/Shaft_00490_title.png b/detail_png/Shaft_00490_title.png new file mode 100644 index 0000000000000000000000000000000000000000..93e03912574adc1c7658af54bdda57ede495f1df --- /dev/null +++ b/detail_png/Shaft_00490_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7df33cc07aa175f176c4a062590ec0cbfffba524c81c29f2e149a06396634e4 +size 22258 diff --git a/detail_png/Shaft_00491_diam.png b/detail_png/Shaft_00491_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fbc6d1b2e01e4588927d047f760c139151a01a05 --- /dev/null +++ b/detail_png/Shaft_00491_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c085b4492b85143764b1cba72730dd775c4c7642aea1e045c5756d6d12d9dfd8 +size 35116 diff --git a/detail_png/Shaft_00491_length.png b/detail_png/Shaft_00491_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77a297f1162a214338e9743ec48c210436a1fa78 --- /dev/null +++ b/detail_png/Shaft_00491_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a37b0f19525c6711cd5229db9f4c67e76fee1212caeacab20a5f1d3a14ea81e +size 34656 diff --git a/detail_png/Shaft_00491_title.png b/detail_png/Shaft_00491_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b175a6612e5d767bbf3614bd52aaf909508ca51d --- /dev/null +++ b/detail_png/Shaft_00491_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:530aa971a2010a5cd50e708ece53b99598912dfaa0102261a71d89b8f89c2f29 +size 31543 diff --git a/detail_png/Shaft_00493_diam.png b/detail_png/Shaft_00493_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..21773a70a88d431301a2ef478e6ffd95e058ffb7 --- /dev/null +++ b/detail_png/Shaft_00493_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7604d6222652ce1e50cca2b33fe6b00b4e051a6381164672be42c41bdbeb97f0 +size 32407 diff --git a/detail_png/Shaft_00493_length.png b/detail_png/Shaft_00493_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9918ea5859017ba32b4a93b253acfe0d119224f1 --- /dev/null +++ b/detail_png/Shaft_00493_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:388ff625f3e9b52cb01660e1ecd15c759d42bae8f5352aa638a1b5290f5f9e94 +size 41492 diff --git a/detail_png/Shaft_00493_title.png b/detail_png/Shaft_00493_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6464f6d1e00972432e487f5189c006b285100f15 --- /dev/null +++ b/detail_png/Shaft_00493_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d2f8802f917932648d64339dd5b1db6640e7b858d09c7e9c06347d48047b4fd +size 30635 diff --git a/detail_png/Shaft_00497_diam.png b/detail_png/Shaft_00497_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fc0b2c4d01f7a8a3821a0b7d15690a2c529a5135 --- /dev/null +++ b/detail_png/Shaft_00497_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff6b25ac6b2d0a5b6cc59d22db8d3116915e031c3f6954c407add52973306702 +size 29199 diff --git a/detail_png/Shaft_00497_length.png b/detail_png/Shaft_00497_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8d811a8429d5e4d789561fe4385327c18a0acdb6 --- /dev/null +++ b/detail_png/Shaft_00497_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e12e435d0561ad44893ee3a4f39585776ef0ff8b0626bfe9be5f6e1a8608a247 +size 22129 diff --git a/detail_png/Shaft_00497_title.png b/detail_png/Shaft_00497_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fbfd018c70a83c29697d190c85ab07921f7b26ca --- /dev/null +++ b/detail_png/Shaft_00497_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca27cefc7341c4a5818d5295bce160bedb7a35aa42da771e99738f2d3e5373ad +size 21039 diff --git a/detail_png/Shaft_00499_diam.png b/detail_png/Shaft_00499_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f4951048ca4f0bde34dadf9e0f7a44d354ca80b7 --- /dev/null +++ b/detail_png/Shaft_00499_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b18e74986cb8cfb34f7be65947e9ecbce94fa4fecb62140799156bbca19fc34 +size 25175 diff --git a/detail_png/Shaft_00499_length.png b/detail_png/Shaft_00499_length.png new file mode 100644 index 0000000000000000000000000000000000000000..da92d496e0f84a24d6ca7d0eb57e3329ca0cb46f --- /dev/null +++ b/detail_png/Shaft_00499_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5995514404cb02218a379fa010a77b0cc243cca9fe7b990d7a43b8b17cea917 +size 29220 diff --git a/detail_png/Shaft_00499_title.png b/detail_png/Shaft_00499_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2687a8f12c6575831032247bddd7555efe68df89 --- /dev/null +++ b/detail_png/Shaft_00499_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:195822ad3fd7b1d22669002001a9b68d7a031da1bc4fbbcf4e4de825f028630f +size 32680 diff --git a/detail_png/Shaft_00501_diam.png b/detail_png/Shaft_00501_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..177af0b7258e22aa87584e480d826223050b5a3c --- /dev/null +++ b/detail_png/Shaft_00501_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07e35735971a9716318c178fc98dec00c67f0789555fbc64c66e39b0ce49e17a +size 25102 diff --git a/detail_png/Shaft_00501_length.png b/detail_png/Shaft_00501_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0b219a935be5fd0dc7b4a81252c2adc93192fb46 --- /dev/null +++ b/detail_png/Shaft_00501_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd276c952009cc623b06112ee3b14ba91d6e695ff9bd2f1d256192ea3d85703e +size 26179 diff --git a/detail_png/Shaft_00501_title.png b/detail_png/Shaft_00501_title.png new file mode 100644 index 0000000000000000000000000000000000000000..81c06976553453824046ca6db60d4c402dd8afee --- /dev/null +++ b/detail_png/Shaft_00501_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37fa7ca18b3b5877ba872af020f373cb79fbb98c9822bb64e478538997fb6f87 +size 28423 diff --git a/detail_png/Shaft_00504_diam.png b/detail_png/Shaft_00504_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5b83009ee64bdd219c702ddefa0e1b394f6f2f01 --- /dev/null +++ b/detail_png/Shaft_00504_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0589116e1827610c16b16d466060fe363a6befac0101b07abcc3154c83277fbc +size 19448 diff --git a/detail_png/Shaft_00504_length.png b/detail_png/Shaft_00504_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5f3108ed0067862a49af3bf30c93db601181323a --- /dev/null +++ b/detail_png/Shaft_00504_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d211c81e6302caa3312d0d3d2b8e13ed4d00747bfb19c474a357ea660f9f3c1b +size 16011 diff --git a/detail_png/Shaft_00504_title.png b/detail_png/Shaft_00504_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fc112a2c3b353e4160cc9bfdf74f2f2ef13777b4 --- /dev/null +++ b/detail_png/Shaft_00504_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa54c118d93280f3a3bb7d26cb7be7a9b09bcc11654cdab8f0c2e6f0c5539ce4 +size 22171 diff --git a/detail_png/Shaft_00506_diam.png b/detail_png/Shaft_00506_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d2bb9daaee01b87d524a69b64214769c032bcd9 --- /dev/null +++ b/detail_png/Shaft_00506_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:518f4e2269c25ade22e1cdcfdb6c2f4fa52ac4fa5c1efd6c3f4d9bc6f1f01f61 +size 36110 diff --git a/detail_png/Shaft_00506_length.png b/detail_png/Shaft_00506_length.png new file mode 100644 index 0000000000000000000000000000000000000000..493c385eeda84a6f6f63b16e3946f13e8461f0be --- /dev/null +++ b/detail_png/Shaft_00506_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:290e77ddb6da7a83b29f869b91b98c7de3c51ee748f60756b01932a6fbe373bb +size 29252 diff --git a/detail_png/Shaft_00506_title.png b/detail_png/Shaft_00506_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ce178713449b029bd94b92baa59982ee0647874a --- /dev/null +++ b/detail_png/Shaft_00506_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b05cc0230374672efb59641088d7f11964f568dc144211f1c46fe2bd7d4a67bb +size 30486 diff --git a/detail_png/Shaft_00508_diam.png b/detail_png/Shaft_00508_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c7dbde1410e3723f2a17a1d5b7d7b53e0a8313c2 --- /dev/null +++ b/detail_png/Shaft_00508_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ec37462d7cd5df20d0290b09d3f79b3eed818e60e2ae20676a5c3034eea4b7e +size 23474 diff --git a/detail_png/Shaft_00508_length.png b/detail_png/Shaft_00508_length.png new file mode 100644 index 0000000000000000000000000000000000000000..15c07ddf13d65725a46fcece1a4a611b9fb2397d --- /dev/null +++ b/detail_png/Shaft_00508_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d175c97f66c8f204934b5217309baf0989156bc8a12541c79acfd4aed914556 +size 25250 diff --git a/detail_png/Shaft_00508_title.png b/detail_png/Shaft_00508_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f706078257cf04100a857cda631ba1d5f60124a5 --- /dev/null +++ b/detail_png/Shaft_00508_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eab4cdf9bdeb7267daf2cf419cceab4db358a88da873a3d6eea0a06b6cbc32b8 +size 32898 diff --git a/detail_png/Shaft_00510_diam.png b/detail_png/Shaft_00510_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..84a3e39d4b0d81995f1f428f873a9518e2e18a93 --- /dev/null +++ b/detail_png/Shaft_00510_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:deeffd81952f530096d71f39d69c182a572840e94281a68c1dcf3f3e42cc1c00 +size 33762 diff --git a/detail_png/Shaft_00510_length.png b/detail_png/Shaft_00510_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c007db12a4d3e1c416288bd7090cf92963d648c2 --- /dev/null +++ b/detail_png/Shaft_00510_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:078e79ca1af5feb82eaeadbc7185475435479f682836a2face1c695d04d095a5 +size 37282 diff --git a/detail_png/Shaft_00510_title.png b/detail_png/Shaft_00510_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5d0527099e96f3733c879c4c7c74f0c4eff05473 --- /dev/null +++ b/detail_png/Shaft_00510_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a435321d7cae5bf0c0ac0b6d050763de218b660213be7263bcd02145fc152010 +size 29620 diff --git a/detail_png/Shaft_00516_diam.png b/detail_png/Shaft_00516_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f2985f610cb09cc18a1e960838c6fb7563e7d338 --- /dev/null +++ b/detail_png/Shaft_00516_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa472d1ebf0588159fc8010ad4a5ace03ae415d42574049c22148f7a206a6a10 +size 25573 diff --git a/detail_png/Shaft_00516_length.png b/detail_png/Shaft_00516_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6746dd6a957e6796bf87565ad0954e1f37bef8b1 --- /dev/null +++ b/detail_png/Shaft_00516_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6086a8dea17061637b9e02c43e852e5eecd8e646cdfafeeabca97da97709a909 +size 22203 diff --git a/detail_png/Shaft_00516_title.png b/detail_png/Shaft_00516_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fbd8f015e522472e0fa28166992a1b74e9730f96 --- /dev/null +++ b/detail_png/Shaft_00516_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e311000ec19bc285e9baeba7464c5012b18db9b1a6e34e372e5723a05956680 +size 21448 diff --git a/detail_png/Shaft_00517_diam.png b/detail_png/Shaft_00517_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8f7f5abd301cde8a4741775de9b20e0893ed9788 --- /dev/null +++ b/detail_png/Shaft_00517_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6ae1799f18cd3ae0579d96a7979d9663d2995ae70777473d1360c5d0cf7e5c4 +size 20191 diff --git a/detail_png/Shaft_00517_length.png b/detail_png/Shaft_00517_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5b6e2bce65e31ed9835d1c76437a027892e7fae5 --- /dev/null +++ b/detail_png/Shaft_00517_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f6f373f4151ddcfd3c226e4102447e951027216fd9d67e1b5ca2432563ab5cd +size 16352 diff --git a/detail_png/Shaft_00517_title.png b/detail_png/Shaft_00517_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4a32dac7b83f9b429acbd9fe3a77279d47d30410 --- /dev/null +++ b/detail_png/Shaft_00517_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962681b4636082a69c259351a1e70ef51ba4e12b8a5df146ba5bc8a72368bc5c +size 25770 diff --git a/detail_png/Shaft_00518_diam.png b/detail_png/Shaft_00518_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25a0cf4d478d70d9406569417327627079042cb5 --- /dev/null +++ b/detail_png/Shaft_00518_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c5911e115031707e103e13bccd4566ec3abb35c0914cf73ed92e67516287e3a +size 20542 diff --git a/detail_png/Shaft_00518_length.png b/detail_png/Shaft_00518_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d9c17ac7be7c606c19e341fbb6dd1f6b93fcb031 --- /dev/null +++ b/detail_png/Shaft_00518_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e41dcd3e6c3d407cf8cdf0cf86328132060e7da4e76c664eaab4c7e35eee8d11 +size 15703 diff --git a/detail_png/Shaft_00518_title.png b/detail_png/Shaft_00518_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ec82e8da8f31fad237ece448dbdbee504cbe2317 --- /dev/null +++ b/detail_png/Shaft_00518_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:260800d9f780f6f917cb51cfaff801208249e28e72ca4845ee74e53bae90d2d2 +size 15503 diff --git a/detail_png/Shaft_00527_diam.png b/detail_png/Shaft_00527_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2d2ef837245138893a8c479df60f35dfb892308c --- /dev/null +++ b/detail_png/Shaft_00527_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecd08f80e33542663b68663731efaab445c60b63f210abe02c0e76628a260f1f +size 19754 diff --git a/detail_png/Shaft_00527_length.png b/detail_png/Shaft_00527_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bc80383a9516b0da9e44f2866091b2c5f808a0a0 --- /dev/null +++ b/detail_png/Shaft_00527_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c1a5b7290cbac373fc14245917b895ccd378c1c57904bd4cc145e0f974c6b0a +size 16413 diff --git a/detail_png/Shaft_00527_title.png b/detail_png/Shaft_00527_title.png new file mode 100644 index 0000000000000000000000000000000000000000..730075e92154ebe254166e15faacc9088d81890f --- /dev/null +++ b/detail_png/Shaft_00527_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25b81e62516888fe586e3951582a244e4b30ec5fe9e216e62420d2657350f49e +size 15726 diff --git a/detail_png/Shaft_00528_diam.png b/detail_png/Shaft_00528_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d806e5c64362e5a10a60864388e4a968eb153bff --- /dev/null +++ b/detail_png/Shaft_00528_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38bb893e86c2c983a858892823a31080ea7e4cc20e66e650da8c8866af6e2a4d +size 30257 diff --git a/detail_png/Shaft_00528_length.png b/detail_png/Shaft_00528_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c7c32381731cb548f85d6b402db876254146a935 --- /dev/null +++ b/detail_png/Shaft_00528_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bbb9b602d013a1ecf5b47a43b7333779c5bf12027f7e4185f4f8862dc164360 +size 28776 diff --git a/detail_png/Shaft_00528_title.png b/detail_png/Shaft_00528_title.png new file mode 100644 index 0000000000000000000000000000000000000000..89982dc0f2d9e10fb6f43e0724088451ee41fc25 --- /dev/null +++ b/detail_png/Shaft_00528_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:201bbc939c618df3245e1d14a574d725c0c49213e621bc35ab589206f53058f6 +size 36328 diff --git a/detail_png/Shaft_00529_diam.png b/detail_png/Shaft_00529_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0bb82783c7c0f312a58e528d831c8ec446f06fcb --- /dev/null +++ b/detail_png/Shaft_00529_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79ba88b1fb31fa32a573f687c9358b598d9e5de0b9e00b02b451a78b253f77ec +size 34035 diff --git a/detail_png/Shaft_00529_length.png b/detail_png/Shaft_00529_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6d1e45a57a4e0223a3ca6d906c7b2a3c7ffb2318 --- /dev/null +++ b/detail_png/Shaft_00529_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b95746e35fcd7143d061c50067d8819adaa960ae4d99ce6984b201ccdd83f1be +size 30541 diff --git a/detail_png/Shaft_00529_title.png b/detail_png/Shaft_00529_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a9e3e24af062456631163bc5eaf59c33ea0a6eb1 --- /dev/null +++ b/detail_png/Shaft_00529_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:168b1e207eca7a17153d367d670c8fd5f5b8081922de2307cb46f7c1063d704b +size 29602 diff --git a/detail_png/Shaft_00530_diam.png b/detail_png/Shaft_00530_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3f3acd20a3a71c43efabab98781a4cf53c887a74 --- /dev/null +++ b/detail_png/Shaft_00530_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0d94fad8ced537575d4b57df5e3ec1a02859380c4d90bcebde5b312e712a63f +size 18628 diff --git a/detail_png/Shaft_00530_length.png b/detail_png/Shaft_00530_length.png new file mode 100644 index 0000000000000000000000000000000000000000..56cbf09b1d893aa91a3fdace2e9b75c12e975009 --- /dev/null +++ b/detail_png/Shaft_00530_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7fa0ecfd63167846a41e5d75733490948750f0bba175a00ecbe507b3664c3c7 +size 16332 diff --git a/detail_png/Shaft_00530_title.png b/detail_png/Shaft_00530_title.png new file mode 100644 index 0000000000000000000000000000000000000000..11e67e3c6bfaaca3166d2f56a653d2da578cfba6 --- /dev/null +++ b/detail_png/Shaft_00530_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:511040f255956d6e13be0e3f3e389672abeb18e9a89e4ae2321ad097ceec2963 +size 13621 diff --git a/detail_png/Shaft_00533_diam.png b/detail_png/Shaft_00533_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ea14b0e3d3e0a78377dcc245bec7c79a5f4d8bb6 --- /dev/null +++ b/detail_png/Shaft_00533_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7bdabec8f719d6f590fb0eba0e5b11d42c83ea4125accdfceaa362c8c9beb4b +size 27387 diff --git a/detail_png/Shaft_00533_length.png b/detail_png/Shaft_00533_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9e6416660b2bc30c1d91ba5b735a622c597b4c57 --- /dev/null +++ b/detail_png/Shaft_00533_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5222e668e058178864d37a49c23b88fff1736b588ee1e6f88a753d76fd0be6b8 +size 30990 diff --git a/detail_png/Shaft_00533_title.png b/detail_png/Shaft_00533_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cb3d8945ff2d5694dc1b64990d6c41ca6fbedc22 --- /dev/null +++ b/detail_png/Shaft_00533_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a61d9cbc8fd37bd8221d68b11f4f17465eefb4865282953f8235671bdd51b1d +size 32863 diff --git a/detail_png/Shaft_00536_diam.png b/detail_png/Shaft_00536_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..693fdfb67e38d9e95a9320ba256cfef234cd5326 --- /dev/null +++ b/detail_png/Shaft_00536_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2efed845a03961ff244634f3e1d0b31f56e75e9b6b475aef83a322d540c39d5 +size 19807 diff --git a/detail_png/Shaft_00536_length.png b/detail_png/Shaft_00536_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f817fe075cbd8c4a7a95818a1ef4d29905a0d040 --- /dev/null +++ b/detail_png/Shaft_00536_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cc0aa7e17d624ec186b72709a4353f7c7ef8f7bcfd229edd4ed2b72c3bdc076 +size 15956 diff --git a/detail_png/Shaft_00536_title.png b/detail_png/Shaft_00536_title.png new file mode 100644 index 0000000000000000000000000000000000000000..913a60a8f8482b64a02654868cc8c25a8c7392ff --- /dev/null +++ b/detail_png/Shaft_00536_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83c670198a525698d5d7d60c455cf1725638dbb85f178e441c75354d5e5d4d72 +size 16556 diff --git a/detail_png/Shaft_00539_diam.png b/detail_png/Shaft_00539_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da41248d7d54e88d80c652c7ddb93a6d63355ab6 --- /dev/null +++ b/detail_png/Shaft_00539_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef3e60aa461278c5a465c6a08013c2ea96191ebf04aae2078b7edf80ffadcc26 +size 20047 diff --git a/detail_png/Shaft_00539_length.png b/detail_png/Shaft_00539_length.png new file mode 100644 index 0000000000000000000000000000000000000000..59e22bf5bb34a4d4cae3f73afbe5970bd2a76da6 --- /dev/null +++ b/detail_png/Shaft_00539_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5e156c26035d1a709bad425308e75532ef6f5bf4c46ff1a28c11d5f576eb8af +size 15531 diff --git a/detail_png/Shaft_00539_title.png b/detail_png/Shaft_00539_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3f6b00ae14094a7aa0dab49efebe930087c9a226 --- /dev/null +++ b/detail_png/Shaft_00539_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae833f2a0d234ed309ab1fce61fc6ce51498a356f399100e3c4309ccfbdc8f41 +size 25454 diff --git a/detail_png/Shaft_00542_diam.png b/detail_png/Shaft_00542_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..596aa78ae42b0f9ddec5f6e31b2c4937abcf3c67 --- /dev/null +++ b/detail_png/Shaft_00542_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c135fb220f32fd8c92e4e144a14be3012643f16be8825ed7a4e93c4fd8fd286 +size 20455 diff --git a/detail_png/Shaft_00542_length.png b/detail_png/Shaft_00542_length.png new file mode 100644 index 0000000000000000000000000000000000000000..18d248d966d22c3f152ff5024435fa7997f8e6b4 --- /dev/null +++ b/detail_png/Shaft_00542_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f618b51caba3558b0aaf2ad455e24acbcab40d9664eca20494ac7b84cb2e773 +size 20938 diff --git a/detail_png/Shaft_00542_title.png b/detail_png/Shaft_00542_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ed4e609476e21dc0c1f0ad7fb857817469324db1 --- /dev/null +++ b/detail_png/Shaft_00542_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08c9c657084bf9997399b11adee7708847a349d7b263a70306eb6cf7c2a44d33 +size 30137 diff --git a/detail_png/Shaft_00543_diam.png b/detail_png/Shaft_00543_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..61d9ede6894322ad61c4d72d24e75bdf6d8b503c --- /dev/null +++ b/detail_png/Shaft_00543_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60cda9040486db708d3ac70468573ff4eea9b9ec947c0199e737584a717a646c +size 38444 diff --git a/detail_png/Shaft_00543_length.png b/detail_png/Shaft_00543_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ecb6f5ced0efc58c244cee40dcb3c60f9713d723 --- /dev/null +++ b/detail_png/Shaft_00543_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:338a79b655e563ddffc9550312d753670a3d8a1fad15c921e84a025a8ab4ecbf +size 54797 diff --git a/detail_png/Shaft_00543_title.png b/detail_png/Shaft_00543_title.png new file mode 100644 index 0000000000000000000000000000000000000000..55875e2317d86849add403c2bf96a44d49421738 --- /dev/null +++ b/detail_png/Shaft_00543_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2d3aa4b2ddb8c24061b1868df249478e3407d72678e07efd72e603fa54dc01d +size 30346 diff --git a/detail_png/Shaft_00549_diam.png b/detail_png/Shaft_00549_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4d1ff74fe4507d1395a65b419b34d634e452fad2 --- /dev/null +++ b/detail_png/Shaft_00549_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6050db392758d031c45cea40b449958582d840d5c7c551e2a3a355ccbaaeae3d +size 30553 diff --git a/detail_png/Shaft_00549_length.png b/detail_png/Shaft_00549_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8785e8553c845efa18742a2a7ffe70d766d009cc --- /dev/null +++ b/detail_png/Shaft_00549_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49355c35117e82b271ce7c981325e4d64fc08263b81fe8ef769093cbb78a045a +size 36170 diff --git a/detail_png/Shaft_00549_title.png b/detail_png/Shaft_00549_title.png new file mode 100644 index 0000000000000000000000000000000000000000..16ceaf0864620a1ed1d3a987eae0b827b113dc53 --- /dev/null +++ b/detail_png/Shaft_00549_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9fc4a86b95345acdaf162173b40ffe8365f660b52e851c1d400cf706f38588a +size 30006 diff --git a/detail_png/Shaft_00552_diam.png b/detail_png/Shaft_00552_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..64ed4cbc074688ed8b7878d276f81b63990bd8a3 --- /dev/null +++ b/detail_png/Shaft_00552_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bd0caa7fa827d0a369e14080f7de0ec9f3c00ced1e3fb97ddeec1545e4b2b83 +size 36907 diff --git a/detail_png/Shaft_00552_length.png b/detail_png/Shaft_00552_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f520a5ea94244fa8dac8209d3984a4a5b414ade --- /dev/null +++ b/detail_png/Shaft_00552_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f23b56ba9a22a88d6619314b9a8db9cd9b6cc01430bc3a5f2bee21ba74a8a3fd +size 45400 diff --git a/detail_png/Shaft_00552_title.png b/detail_png/Shaft_00552_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a68e147fb431edba56d5f401bd16013da5c4816c --- /dev/null +++ b/detail_png/Shaft_00552_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e626531a02165fd1f3e6a3f08e4886d9143e4c232afb42068feae3f608ef171b +size 35841 diff --git a/detail_png/Shaft_00556_diam.png b/detail_png/Shaft_00556_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2d088636176e67b2e1edf574898e91099cde538d --- /dev/null +++ b/detail_png/Shaft_00556_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52bf139be5f67267a025245b0ffe2972cc7f9e468230a9e1474c7e6e28be231c +size 19725 diff --git a/detail_png/Shaft_00556_length.png b/detail_png/Shaft_00556_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0bc1a427a9f49cdb59be6eea5811983616ea9c6d --- /dev/null +++ b/detail_png/Shaft_00556_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a86e82180c47f86e18fb079fdc879808280433eee5fcb67265e1b089a7441b7 +size 18856 diff --git a/detail_png/Shaft_00556_title.png b/detail_png/Shaft_00556_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d1a329918f6bf9cb0cb595633f89160029bc8499 --- /dev/null +++ b/detail_png/Shaft_00556_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b15f3ca730778a6fd08cc5a634a759d5d3703d3dacd761add5f59eebfa023b84 +size 31630 diff --git a/detail_png/Shaft_00566_diam.png b/detail_png/Shaft_00566_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c75b37f373577921a654ffa5cd0413ff089836a4 --- /dev/null +++ b/detail_png/Shaft_00566_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05e252e14981d31790fa64d31fbe26fd7f95a4bc867c4473f4ce20731e81bd11 +size 34755 diff --git a/detail_png/Shaft_00566_length.png b/detail_png/Shaft_00566_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bb29476b068b271fc23a422704102b68305c01c5 --- /dev/null +++ b/detail_png/Shaft_00566_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d52b01a4baeaabf154437e25bc0a44d18bc0ea32ef896bdad49f6a81d9bb6b53 +size 49053 diff --git a/detail_png/Shaft_00566_title.png b/detail_png/Shaft_00566_title.png new file mode 100644 index 0000000000000000000000000000000000000000..473ca3bc9126e2001bbced42e3082c266182a69c --- /dev/null +++ b/detail_png/Shaft_00566_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:685b81087ae8b6fa4e43f2ee79534376786c3996142167628fd837985f03edc4 +size 32169 diff --git a/detail_png/Shaft_00574_diam.png b/detail_png/Shaft_00574_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..671149c3fb81357427cea0ead907c33242d4d9d0 --- /dev/null +++ b/detail_png/Shaft_00574_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fdfb6b8ec81835ba11f6c4056e4375eae9028597e2f4736286506264796632b +size 34971 diff --git a/detail_png/Shaft_00574_length.png b/detail_png/Shaft_00574_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ade607938a0fd7e42b9f33438028de66e27cb388 --- /dev/null +++ b/detail_png/Shaft_00574_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e0131bcaed29fa06670bf08a54703a192549ba8457c0abb3d2031610118a1b8 +size 27176 diff --git a/detail_png/Shaft_00574_title.png b/detail_png/Shaft_00574_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8a5e7bed054b9c8934e550933522888cf1439e08 --- /dev/null +++ b/detail_png/Shaft_00574_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fa5f9a66ff982b26fc2133021bf041fa4859bf37079c08bf0ec501008ca090f +size 23238 diff --git a/detail_png/Shaft_00580_diam.png b/detail_png/Shaft_00580_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d60ab4ca03034a2be162acb4355ceeb24232d3f2 --- /dev/null +++ b/detail_png/Shaft_00580_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08d94fd77e5f878b39d564ec9174141ab1300736fec13e31e974a6b177ed1862 +size 25808 diff --git a/detail_png/Shaft_00580_length.png b/detail_png/Shaft_00580_length.png new file mode 100644 index 0000000000000000000000000000000000000000..11a8136dea0b2024e123af8a81e86953ac8d136d --- /dev/null +++ b/detail_png/Shaft_00580_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9a20e9b80156797dd81afe3e611b2d45a1a9b2e47c4905f6c7107edf184345a +size 22037 diff --git a/detail_png/Shaft_00580_title.png b/detail_png/Shaft_00580_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4034cc27b06beb55046004a9fe66553a94ef3720 --- /dev/null +++ b/detail_png/Shaft_00580_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3721776d2a0f408ccff342dac2205edd98732b88c02259588659e7e802b84ad +size 20092 diff --git a/detail_png/Shaft_00583_diam.png b/detail_png/Shaft_00583_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da11ee5a708524fe1a1c3d290cfc32107f6f1ac6 --- /dev/null +++ b/detail_png/Shaft_00583_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e30ef1dcebb939fc1a179065d4cc13f14ffb20bb33eaa7d78e59300de0b91077 +size 39741 diff --git a/detail_png/Shaft_00583_length.png b/detail_png/Shaft_00583_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4b67f19507ecaa8b0019c706d4d5a65c5026de67 --- /dev/null +++ b/detail_png/Shaft_00583_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eddcf0802f873f922f1b12695ae00ad1c9e0b0e16f6d065501d79169568d9ce3 +size 59184 diff --git a/detail_png/Shaft_00583_title.png b/detail_png/Shaft_00583_title.png new file mode 100644 index 0000000000000000000000000000000000000000..467e13d50566383d5ca726f881d1d89a3f357bfd --- /dev/null +++ b/detail_png/Shaft_00583_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e539433ca5dcedb1c8b0a605a53406c10e14e491926a62fc6716149f27aea6db +size 33978 diff --git a/detail_png/Shaft_00585_diam.png b/detail_png/Shaft_00585_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dd382f05f7cd8ff007b83daf30f282bb115624a1 --- /dev/null +++ b/detail_png/Shaft_00585_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91b4956f1f1f5f8d117051a9bf5291cc54e4d2214230b949f60d963dc722edba +size 26019 diff --git a/detail_png/Shaft_00585_length.png b/detail_png/Shaft_00585_length.png new file mode 100644 index 0000000000000000000000000000000000000000..36f65c73ffe80b153b26c713924ab9d1a2280df5 --- /dev/null +++ b/detail_png/Shaft_00585_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d20b5075ec37474d279b8532c2502025341a359d4ce8d753d5ce4517c98617c +size 20337 diff --git a/detail_png/Shaft_00585_title.png b/detail_png/Shaft_00585_title.png new file mode 100644 index 0000000000000000000000000000000000000000..642d39f20a03cede375d69b1a2a01e4ade723e8b --- /dev/null +++ b/detail_png/Shaft_00585_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2ff20c5b8b2b91cebfc04a6344a7a82f3953bb9a4850e5093a588ef7db373e9 +size 19522 diff --git a/detail_png/Shaft_00589_diam.png b/detail_png/Shaft_00589_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..811c177ba5b8cf51cdd8cbaa8d1ebd7c31dfeb3e --- /dev/null +++ b/detail_png/Shaft_00589_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82606cfafe845736f028b133d45d17b6adeedba79e6c82eb7c7734b2e69d3ccd +size 30573 diff --git a/detail_png/Shaft_00589_length.png b/detail_png/Shaft_00589_length.png new file mode 100644 index 0000000000000000000000000000000000000000..af89292388bb21c6b529b96fd8804a0df440cdf9 --- /dev/null +++ b/detail_png/Shaft_00589_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e037ef86b65f5e7e1dbeec2b27d232e8cffe54aaa9e25898205c100c628c7b4 +size 40599 diff --git a/detail_png/Shaft_00589_title.png b/detail_png/Shaft_00589_title.png new file mode 100644 index 0000000000000000000000000000000000000000..420bfa6131cce889b2294db527952cd1e62417b9 --- /dev/null +++ b/detail_png/Shaft_00589_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:416b078506984d7cc0ae503754e7a76021b4f20a35caf77b1d34aa4283d41d25 +size 33779 diff --git a/detail_png/Shaft_00591_diam.png b/detail_png/Shaft_00591_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8b42d1101cf164e9a44ccfb5013eb03830374d5 --- /dev/null +++ b/detail_png/Shaft_00591_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6969f3addd8b12e27d6f84052f296874d46bd216d4b44a429e043472e603c907 +size 25097 diff --git a/detail_png/Shaft_00591_length.png b/detail_png/Shaft_00591_length.png new file mode 100644 index 0000000000000000000000000000000000000000..215eb3585d119a4bea74f1e5004ad6b347fc7119 --- /dev/null +++ b/detail_png/Shaft_00591_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:639450d1dd16a5361d342aa17d6b2ab24cfd92ffe730a04519d34250963fdb28 +size 22615 diff --git a/detail_png/Shaft_00591_title.png b/detail_png/Shaft_00591_title.png new file mode 100644 index 0000000000000000000000000000000000000000..23abde30320c8f57f3abba819f0d54b62bc890ba --- /dev/null +++ b/detail_png/Shaft_00591_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16c68bfe1c4682fbdfafa8d49d07484c31fd2c9377f0114f066da5c915d1d956 +size 29153 diff --git a/detail_png/Shaft_00592_diam.png b/detail_png/Shaft_00592_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a0e47b6f6a036bf86f3b09a6546185cf3b071063 --- /dev/null +++ b/detail_png/Shaft_00592_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ea5b805e4cdf59c9f7314e2de25aeddfb2d4798d6441740ca6b94f5e340b2ab +size 25037 diff --git a/detail_png/Shaft_00592_length.png b/detail_png/Shaft_00592_length.png new file mode 100644 index 0000000000000000000000000000000000000000..01bf2098447fc18958c874cb6388cbbf2a11e85d --- /dev/null +++ b/detail_png/Shaft_00592_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55e2ba6b513a79a707dd95b6f75d9fbd005ec60cca5c2e51bc1348856c4be22c +size 24101 diff --git a/detail_png/Shaft_00592_title.png b/detail_png/Shaft_00592_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ce19a6b78b372f0e9b3533c3138643e2e43abcf6 --- /dev/null +++ b/detail_png/Shaft_00592_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b08a2ec9fb8cf155054329c526f0129fe5808955d5977e2e49404c6846c262d8 +size 30157 diff --git a/detail_png/Shaft_00597_diam.png b/detail_png/Shaft_00597_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1711e9427cc3a05960d0d16e182cb61990eb56d4 --- /dev/null +++ b/detail_png/Shaft_00597_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:838e823295700bddbf0dee1f33cc06ef6305041b6947ae8c145726d8acc1b9c8 +size 20688 diff --git a/detail_png/Shaft_00597_length.png b/detail_png/Shaft_00597_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5769930cf3f94b90c494ce0496ace8abf39aa909 --- /dev/null +++ b/detail_png/Shaft_00597_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9582275f942fae78376304afa64966ae1225bf2b30aeb2877e38d3b02a763563 +size 17850 diff --git a/detail_png/Shaft_00597_title.png b/detail_png/Shaft_00597_title.png new file mode 100644 index 0000000000000000000000000000000000000000..80ec0ab9ae96bcbe4cf9f5e63baa0f78115493c9 --- /dev/null +++ b/detail_png/Shaft_00597_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:991c8282e5a3a98b4873b38e0425bced00c1cb1d22e7f3287d5dc78cc5b174a4 +size 18641 diff --git a/detail_png/Shaft_00598_diam.png b/detail_png/Shaft_00598_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a5deb64b618a0642360789c999c8aff3713d4556 --- /dev/null +++ b/detail_png/Shaft_00598_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89a22cc3fc04d1baccc8c6874c59181e23419a1bac9b3f92ce79a711867f01e3 +size 29224 diff --git a/detail_png/Shaft_00598_length.png b/detail_png/Shaft_00598_length.png new file mode 100644 index 0000000000000000000000000000000000000000..25915f42f614867a696337725627063e8bf19930 --- /dev/null +++ b/detail_png/Shaft_00598_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e2dc2dcb6c88a8c35bc5c487c62193afff05cc2a6a59f9a6acff50c4d73d0e9 +size 28809 diff --git a/detail_png/Shaft_00598_title.png b/detail_png/Shaft_00598_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9e5dfff291b6e8ab79d3063ccbf416468432388a --- /dev/null +++ b/detail_png/Shaft_00598_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f86a71f0ad484fd0d6bc9a0dfdad1cd9551bcb503e43ddc6eb8cda487c21bc7 +size 33154 diff --git a/detail_png/Shaft_00600_diam.png b/detail_png/Shaft_00600_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..13bbda71d872408046894894cd52cff6e02453de --- /dev/null +++ b/detail_png/Shaft_00600_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e32d31aa7811d004d4a5330335a1c8f1b02985af7789e699f44a9b46b266476 +size 37837 diff --git a/detail_png/Shaft_00600_length.png b/detail_png/Shaft_00600_length.png new file mode 100644 index 0000000000000000000000000000000000000000..17237cab6d43faa9550a2065f12fd611e88381a8 --- /dev/null +++ b/detail_png/Shaft_00600_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c1f01ca03472138763bb311877612f2b86a3648b4cea6eaba59fbad4515c1d5 +size 51538 diff --git a/detail_png/Shaft_00600_title.png b/detail_png/Shaft_00600_title.png new file mode 100644 index 0000000000000000000000000000000000000000..76b930aed820d67843b4cf6399a9e89ed599115e --- /dev/null +++ b/detail_png/Shaft_00600_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dbd8cdf860a1aeac9b6105b77f3ce04fef0f4efcde1724c0cc0eba04bcf44cb +size 30970 diff --git a/detail_png/Shaft_00608_diam.png b/detail_png/Shaft_00608_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a07137e525e68d1a9428b98bdbea4b7290d17a7a --- /dev/null +++ b/detail_png/Shaft_00608_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8052e9a2ec120a66774c0d0600b5c5154b1087ae1107b89727d181e3cbee3c7 +size 30176 diff --git a/detail_png/Shaft_00608_length.png b/detail_png/Shaft_00608_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c29ec2fe926ad9bca9ba06b5c25dfe9c7941e680 --- /dev/null +++ b/detail_png/Shaft_00608_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab1fa2f9b29fc6dc40f4ffc51465a28cce87b9fc44a780da50fe2ef0b8bd43b8 +size 30676 diff --git a/detail_png/Shaft_00608_title.png b/detail_png/Shaft_00608_title.png new file mode 100644 index 0000000000000000000000000000000000000000..714b2aa95116c2a5cbff89761f953cf5dc405b0b --- /dev/null +++ b/detail_png/Shaft_00608_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef5e703feb5e512550dc208660a85e49a499b1da9f608935c53eefc6c1ea20d +size 33310 diff --git a/detail_png/Shaft_00609_diam.png b/detail_png/Shaft_00609_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e4b5e9584e47fb5db11db8f106d76a7b9dc93abe --- /dev/null +++ b/detail_png/Shaft_00609_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74b60756886324a532bd887fbac5925e29bb28c42d0c33f608538ae5c0642cce +size 25324 diff --git a/detail_png/Shaft_00609_length.png b/detail_png/Shaft_00609_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1e0e3b55d4efc4cf524bd26c97b89dfa0dfbcb2a --- /dev/null +++ b/detail_png/Shaft_00609_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4c14152ab085c11c6b0cd7ae41e736bb1852c8af61f27ad420534c91b19553d +size 21672 diff --git a/detail_png/Shaft_00609_title.png b/detail_png/Shaft_00609_title.png new file mode 100644 index 0000000000000000000000000000000000000000..578fb779dd144aaf5b30dd67c5ba34b9f2ecc25d --- /dev/null +++ b/detail_png/Shaft_00609_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7234bdacdaa6b0fe792af6de7d12081d97e4bbccaeadc726e13637244c28e1ea +size 15826 diff --git a/detail_png/Shaft_00619_diam.png b/detail_png/Shaft_00619_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a322df53c0ec0e9729e4db04cd7aa470674420cb --- /dev/null +++ b/detail_png/Shaft_00619_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7767ce899d4da53c78ec850b196522b55bea7831e3da6c72b399f74c7fdd4a85 +size 28625 diff --git a/detail_png/Shaft_00619_length.png b/detail_png/Shaft_00619_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3f437199fb330f08e8ae76de6e689d04c367aa40 --- /dev/null +++ b/detail_png/Shaft_00619_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6eed6117b182f374926c625b9719c12ae3371a6cff925dde40cd4660b47d1aa7 +size 37507 diff --git a/detail_png/Shaft_00619_title.png b/detail_png/Shaft_00619_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e1a4a3f5605214c621098c89461bb3512837f541 --- /dev/null +++ b/detail_png/Shaft_00619_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a3b72436052628d0563fb6822bfb553fb3db5dc03451025d84aaadf17040f8b +size 32507 diff --git a/detail_png/Shaft_00620_diam.png b/detail_png/Shaft_00620_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5d9d849ed1e223d7f4e6e4b74dd6714d284e571f --- /dev/null +++ b/detail_png/Shaft_00620_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9031ef7de791b0f275a6b4aab5dbe193066eec91f1883c4507679d7c73735b68 +size 20334 diff --git a/detail_png/Shaft_00620_length.png b/detail_png/Shaft_00620_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fe87ece3b8d469b4e598bfd1ff25b07d1ff54086 --- /dev/null +++ b/detail_png/Shaft_00620_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd5751be76058b0d64bdd62a587b6a88e06b58760f2b8e361e76b0fa079eee38 +size 24290 diff --git a/detail_png/Shaft_00620_title.png b/detail_png/Shaft_00620_title.png new file mode 100644 index 0000000000000000000000000000000000000000..485d9f9bdb3ca7657b1b43e1691b5120734b7412 --- /dev/null +++ b/detail_png/Shaft_00620_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:053ba2ea34a004f2208e2c3d4afe84a8237cf693828efeed74867a5761a73fb2 +size 36296 diff --git a/detail_png/Shaft_00621_diam.png b/detail_png/Shaft_00621_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e80103c27417e86825fa5a68c7dd41f5b3c03999 --- /dev/null +++ b/detail_png/Shaft_00621_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d399e4bf0e9dd2bc549bdb4b07e0c7512f399014ed2f2d4f11b38a634ce3e14 +size 29056 diff --git a/detail_png/Shaft_00621_length.png b/detail_png/Shaft_00621_length.png new file mode 100644 index 0000000000000000000000000000000000000000..da022c6d61e2fb985e5685130af290f47603186c --- /dev/null +++ b/detail_png/Shaft_00621_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1fcb3a89636d3766d81b3a26e2ebcb105f3799cff0e68979b41bcc893f3d279 +size 28278 diff --git a/detail_png/Shaft_00621_title.png b/detail_png/Shaft_00621_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b581ecf89cc793426e94eb1189679b607b9209bd --- /dev/null +++ b/detail_png/Shaft_00621_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee770c27fe886884d1932ddb8c8a4bd6c6a4ed654e508f5620717199329f553b +size 35161 diff --git a/detail_png/Shaft_00622_diam.png b/detail_png/Shaft_00622_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d63a52f00b6b73b9651055fefcfa9191c5119e08 --- /dev/null +++ b/detail_png/Shaft_00622_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19e4e7e769335659f2718a7bad66200484ad1cd876e44369ee8ba4fbad923217 +size 27551 diff --git a/detail_png/Shaft_00622_length.png b/detail_png/Shaft_00622_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a7f9f28d3686b8d3db3db780990a66a96b45c687 --- /dev/null +++ b/detail_png/Shaft_00622_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33f910b2a9f68efc0cf21742befdce43354222c64d1d5ef6816e941ee838d1dd +size 24789 diff --git a/detail_png/Shaft_00622_title.png b/detail_png/Shaft_00622_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ae464dc642f015b6e90791fbf451b8d8b51a2266 --- /dev/null +++ b/detail_png/Shaft_00622_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2dea050e0f796d28dd524990a817093d86355a3144dae625deb384e8e2607fce +size 22384 diff --git a/detail_png/Shaft_00623_diam.png b/detail_png/Shaft_00623_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6e16f22fb438757b81b5c020155d5d3f8ae59508 --- /dev/null +++ b/detail_png/Shaft_00623_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:151d6c1b71c0eced257d5569a461b3c8a17e294e4ba7ed21fd68e916f02216b2 +size 20144 diff --git a/detail_png/Shaft_00623_length.png b/detail_png/Shaft_00623_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29b8051b86f35d28c7377a2bf661e38a21f5e68c --- /dev/null +++ b/detail_png/Shaft_00623_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7adbd75cae1cf10123d4560d8d0aa7f0af75d3d3129489c03137da4fb9ad1b7b +size 18163 diff --git a/detail_png/Shaft_00623_title.png b/detail_png/Shaft_00623_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8c8c2f3d5585836777ecf47be959e576027fdfbf --- /dev/null +++ b/detail_png/Shaft_00623_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:763511ccbb46c282b78fe06d93c54fdaedfd5b3aed112782e537eb2ec42d9bd7 +size 23725 diff --git a/detail_png/Shaft_00626_diam.png b/detail_png/Shaft_00626_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..23ade26919a4bbc40c85157a1c01287f77135e30 --- /dev/null +++ b/detail_png/Shaft_00626_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13fc7c526c80e18959082821c9c061d8889423d2f1efd786e5873b4bc053d3be +size 19535 diff --git a/detail_png/Shaft_00626_length.png b/detail_png/Shaft_00626_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac4db7a7353f6b2e290936f27cd8b0fd1c392e18 --- /dev/null +++ b/detail_png/Shaft_00626_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b415953922ee4a307f9f90985effdf357f8405e7ef15a65dd756dc7ace1de44a +size 15827 diff --git a/detail_png/Shaft_00626_title.png b/detail_png/Shaft_00626_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9337e428584c162845198e41a114fe0eb9e61511 --- /dev/null +++ b/detail_png/Shaft_00626_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:193fa788486d67f3aa65b451e26c378c6202f6c3dcbc3386e9c30199d4331a41 +size 18786 diff --git a/detail_png/Shaft_00627_diam.png b/detail_png/Shaft_00627_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7e399553ce2fd11d688b8cd45306e76c0e6d678e --- /dev/null +++ b/detail_png/Shaft_00627_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6fffcda70e7fb1b75fcb75c238e4f00fb5baba81282f7801a9e63c4a353a99c +size 24517 diff --git a/detail_png/Shaft_00627_length.png b/detail_png/Shaft_00627_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a850d03a7a79e86c2fe36aeeccb306f2843bdc34 --- /dev/null +++ b/detail_png/Shaft_00627_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5b16dc2fa7a7572acbb344f85f6434388253048304f0445ccaaf385c4ce7a46 +size 35867 diff --git a/detail_png/Shaft_00627_title.png b/detail_png/Shaft_00627_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3e6e0115e6f1ce9eb240cef062f38aecd01d312c --- /dev/null +++ b/detail_png/Shaft_00627_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:567d6087eb2a8bae0193d5194ac6c3735fd23f9720041b55c9ad53df0e9d62cc +size 30309 diff --git a/detail_png/Shaft_00632_diam.png b/detail_png/Shaft_00632_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b3252a75a246ea90bf97f4ddc991a5df386c8523 --- /dev/null +++ b/detail_png/Shaft_00632_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8383b0126b0bb07671c9400985b831a828777c121106976ee7f90d9474d71bc7 +size 20671 diff --git a/detail_png/Shaft_00632_length.png b/detail_png/Shaft_00632_length.png new file mode 100644 index 0000000000000000000000000000000000000000..272b93a4ab98452c67f4d0ee53bff83ccd99cd13 --- /dev/null +++ b/detail_png/Shaft_00632_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a77160947f06b7f2c9ca53792f8d60a15f3e8027b07033a32a9587cf794701c6 +size 15113 diff --git a/detail_png/Shaft_00632_title.png b/detail_png/Shaft_00632_title.png new file mode 100644 index 0000000000000000000000000000000000000000..805a35c6bc92ff658f36656add333ffe2344f5a3 --- /dev/null +++ b/detail_png/Shaft_00632_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd956fb1c9950b7eabad2596c671df1367b421e10a0cb7c9b4e0d1cf07932f1f +size 16866 diff --git a/detail_png/Shaft_00633_diam.png b/detail_png/Shaft_00633_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c5c8acb829a2d918b2d4d54351d49574e0780ca1 --- /dev/null +++ b/detail_png/Shaft_00633_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d562fb86dc34c0254cbc2a3f699010a820d512260145988f9338e9480bad5b22 +size 19512 diff --git a/detail_png/Shaft_00633_length.png b/detail_png/Shaft_00633_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f1c62b16160290855a2a42650d0a500252b9ef26 --- /dev/null +++ b/detail_png/Shaft_00633_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18adfc25ed88fd886717ef82c555f818b76c0c79ada308697337961f7a7ebe41 +size 18348 diff --git a/detail_png/Shaft_00633_title.png b/detail_png/Shaft_00633_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8de9a45345c76767be9dc1773dbe4c9a427cb64b --- /dev/null +++ b/detail_png/Shaft_00633_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f88fcd5675b7e721c46de160efd342d1181af3fd26f64a7834017d2ff48e9741 +size 21510 diff --git a/detail_png/Shaft_00634_diam.png b/detail_png/Shaft_00634_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d6d1269356ded527b75229020a80865c5b5676d8 --- /dev/null +++ b/detail_png/Shaft_00634_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f122856feb64c43b0f5a1bbdd7246bfd6b3b4d20db999c319b886edaa316bf7e +size 20483 diff --git a/detail_png/Shaft_00634_length.png b/detail_png/Shaft_00634_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ce67e537490df28dde9a406eac94fbdf90242a1b --- /dev/null +++ b/detail_png/Shaft_00634_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dabb5b5c10f614d89dc7bbbfe22b58fd44927f40521853fea23e02efd5ae2c07 +size 22823 diff --git a/detail_png/Shaft_00634_title.png b/detail_png/Shaft_00634_title.png new file mode 100644 index 0000000000000000000000000000000000000000..539b5ea381016d023181af33b6f9b7bab31b009b --- /dev/null +++ b/detail_png/Shaft_00634_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:019e82c5c06fe86af6e5e4b174a496abbf3e81d519a409ac1ce0da5e5bde6148 +size 29288 diff --git a/detail_png/Shaft_00635_diam.png b/detail_png/Shaft_00635_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d23a05db01adf8d6e238adc31d671650119740a --- /dev/null +++ b/detail_png/Shaft_00635_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f62d05892a45d9af23a096621d816f4e1b2e8375d10bc54b0129b00141fab04 +size 32638 diff --git a/detail_png/Shaft_00635_length.png b/detail_png/Shaft_00635_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc05eb19c9a5f17099c7e0f2b7da5fa267506e0d --- /dev/null +++ b/detail_png/Shaft_00635_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a6921bfd9df41c2fa2d4b9973f0d6d5972b7f66a2d3493a775f84eeffbd6fd2 +size 33032 diff --git a/detail_png/Shaft_00635_title.png b/detail_png/Shaft_00635_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5e8037510e0b9714239c920cb3356c5b6f889df0 --- /dev/null +++ b/detail_png/Shaft_00635_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1e7bfebf5ecf4a51207aed0cb0eba618033c990c2b4a7bc2d1ba90cda8e6c1e +size 36428 diff --git a/detail_png/Shaft_00636_diam.png b/detail_png/Shaft_00636_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..316d964ff8d19886845fd31183f47c0dc84a8b81 --- /dev/null +++ b/detail_png/Shaft_00636_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2c012655daeffac31f9851709ef334cfdfc25fdf8278a9352f17915b6c90232 +size 20127 diff --git a/detail_png/Shaft_00636_length.png b/detail_png/Shaft_00636_length.png new file mode 100644 index 0000000000000000000000000000000000000000..32a869f40c227bb64de96c584b26792200ebdd65 --- /dev/null +++ b/detail_png/Shaft_00636_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69918466a987d5f1c9add95bd9f6d93b81ee584662992ac1748e398bfbe63378 +size 14614 diff --git a/detail_png/Shaft_00636_title.png b/detail_png/Shaft_00636_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3152c74bff4d0d0485d30dd5252d105d7cb4cf98 --- /dev/null +++ b/detail_png/Shaft_00636_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95f69dd6cfb445029002dadc70ee9aa15ff64af6e938532268138fc75634a427 +size 12918 diff --git a/detail_png/Shaft_00637_diam.png b/detail_png/Shaft_00637_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c44789fd143a3abdbc751b5bbc3b01f1a5137972 --- /dev/null +++ b/detail_png/Shaft_00637_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14db3b72bea4bc9cd6de2521ebd33d007d57be55bdef1f513adf89832aa81b9d +size 20308 diff --git a/detail_png/Shaft_00637_length.png b/detail_png/Shaft_00637_length.png new file mode 100644 index 0000000000000000000000000000000000000000..122481db8f7d6a14f4237626da77ebf58762d90c --- /dev/null +++ b/detail_png/Shaft_00637_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e31f25b6b986bc16b19dca731049cbc7e1084115e6adcfdbdf2497a81032a6fc +size 23387 diff --git a/detail_png/Shaft_00637_title.png b/detail_png/Shaft_00637_title.png new file mode 100644 index 0000000000000000000000000000000000000000..58640c9e1eace18a6ffc28d3f47491ce447eae4a --- /dev/null +++ b/detail_png/Shaft_00637_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fb69f9923fd3a7d9c8e10ce7fb8b287598f81f03b507f926a96754eee886c61 +size 32486 diff --git a/detail_png/Shaft_00639_diam.png b/detail_png/Shaft_00639_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4c02a4f0dbb2c49d133f7f62ccf6f15f501ddd3e --- /dev/null +++ b/detail_png/Shaft_00639_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70473316d42a999d962446ce1cc4ce9431bf1cab5b202685b8e8e41599b56e88 +size 19969 diff --git a/detail_png/Shaft_00639_length.png b/detail_png/Shaft_00639_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f05223cb06f00b60fec4cf8f77c13a2ff2c7cd3 --- /dev/null +++ b/detail_png/Shaft_00639_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:465a5f8f3f2a0f57e0370813b07ab5cfc66a78808a2475f8ad06935312edb0c3 +size 18603 diff --git a/detail_png/Shaft_00639_title.png b/detail_png/Shaft_00639_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eb9a824e3a747e2d21eb8d5c56c9a457785682f3 --- /dev/null +++ b/detail_png/Shaft_00639_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75e08c79590c669e53ec2af47da48b4f992a699c0ba699243372d586f35ab609 +size 21642 diff --git a/detail_png/Shaft_00643_diam.png b/detail_png/Shaft_00643_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..78ae642e3a7bd13bd898f6c4b181ef540f43e3da --- /dev/null +++ b/detail_png/Shaft_00643_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d62c10aedaf6df0545d22eb9122fc897049beec94a98627282d63d2746b493a9 +size 30805 diff --git a/detail_png/Shaft_00643_length.png b/detail_png/Shaft_00643_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7ac04a65df11fb65ec1bbfa25feb6cc77ae29136 --- /dev/null +++ b/detail_png/Shaft_00643_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2aa5f1a785c10f317e4a82b736dbf5498a245e65479730a79edbe75cec774c32 +size 30585 diff --git a/detail_png/Shaft_00643_title.png b/detail_png/Shaft_00643_title.png new file mode 100644 index 0000000000000000000000000000000000000000..83afbbed28b132decf6014cbd6cb2c499c9e41ec --- /dev/null +++ b/detail_png/Shaft_00643_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e86fc18195742746faad9e09b6a9be7a26284679b1805b8738158977e309f492 +size 35860 diff --git a/detail_png/Shaft_00650_diam.png b/detail_png/Shaft_00650_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2645ee76fde3643b87d50b6170660a63c11b55a8 --- /dev/null +++ b/detail_png/Shaft_00650_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dbc89e88fba453d8f9d36a4f91de82a4cda1aabea01ef37effedaa37dd27e13 +size 27465 diff --git a/detail_png/Shaft_00650_length.png b/detail_png/Shaft_00650_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e6ff3d5b55c2bf11f9500562a7bc8111e0dfd4d6 --- /dev/null +++ b/detail_png/Shaft_00650_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c9b53fa0b4dbd4f15c1d4eb0821c9a3c69dfa79af882a4110dbf430588fd108 +size 34005 diff --git a/detail_png/Shaft_00650_title.png b/detail_png/Shaft_00650_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8d3e98c23c255eb2f8a70409b083e0b7b2a19dc0 --- /dev/null +++ b/detail_png/Shaft_00650_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6841c89df54623ca1e1e89fff30e4a133040af870ebf8644adb5b7700f397ef3 +size 30778 diff --git a/detail_png/Shaft_00651_diam.png b/detail_png/Shaft_00651_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..801f61cf3bc6bbdeced8c331e8ec9e6d6d7b331c --- /dev/null +++ b/detail_png/Shaft_00651_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bd4dc9006eb047e4f541636eb403f575ccadf9d9d59b8fef00a6de7e92002d7 +size 19065 diff --git a/detail_png/Shaft_00651_length.png b/detail_png/Shaft_00651_length.png new file mode 100644 index 0000000000000000000000000000000000000000..64875d92f2e14ed5e35875efce7f3c825de6cc88 --- /dev/null +++ b/detail_png/Shaft_00651_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1faa39a18b783dbeedeb98c9f8eb39f596c79380bc9f430b0004c99d71984f3 +size 16205 diff --git a/detail_png/Shaft_00651_title.png b/detail_png/Shaft_00651_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6d408f3a2c7b9de481386de8a93549e43094fade --- /dev/null +++ b/detail_png/Shaft_00651_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4c1b3cba19f1d1d9d3c81e9102198676f2e0ba40a61b2506e7b7157b10cc22b +size 19758 diff --git a/detail_png/Shaft_00656_diam.png b/detail_png/Shaft_00656_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..954d7aaa3c306b1cad1c513945b3d879da8b49c7 --- /dev/null +++ b/detail_png/Shaft_00656_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3578eaae4859717bf07f057b842cd1788230be0256b8db9c835cb0e791cc340 +size 20489 diff --git a/detail_png/Shaft_00656_length.png b/detail_png/Shaft_00656_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7d09efa361814a87cbf25240684809df7d26ab9e --- /dev/null +++ b/detail_png/Shaft_00656_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60a0f18e0f96f227db979e585279f321edc842fd248b9df4f5c7ffee3ec5d511 +size 15793 diff --git a/detail_png/Shaft_00656_title.png b/detail_png/Shaft_00656_title.png new file mode 100644 index 0000000000000000000000000000000000000000..03789ee46f0e2e458ad9d58a9ffa655f86ee6f56 --- /dev/null +++ b/detail_png/Shaft_00656_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ea27090ac7c9438c2473c3de3b1ed27942cd47dac44ee6e8749fa8bd0d5b008 +size 18588 diff --git a/detail_png/Shaft_00658_diam.png b/detail_png/Shaft_00658_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..84dbbae11bfb4708b8528e094beb4178b1baa1a4 --- /dev/null +++ b/detail_png/Shaft_00658_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dc43fb69e4ec561ab338b93de496d6002458671641661a48c48c033e499ece2 +size 18973 diff --git a/detail_png/Shaft_00658_length.png b/detail_png/Shaft_00658_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6c8618857c745c8c704d23650305ae609f161a1e --- /dev/null +++ b/detail_png/Shaft_00658_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5bb2f750fd4782ef3803ebce97f973c8a686939eb6ba11e4404a68f03d833e4 +size 26163 diff --git a/detail_png/Shaft_00658_title.png b/detail_png/Shaft_00658_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2252c67de008925a6ec08e96f6b7772e4c8d00d --- /dev/null +++ b/detail_png/Shaft_00658_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:968870d52758206b193b6e12a463f97eccb55c4fa092f41e1e2a671f04fa3b65 +size 30963 diff --git a/detail_png/Shaft_00659_diam.png b/detail_png/Shaft_00659_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5fe1a9d5a4a8ff03fd4bb441064ad5191a65830a --- /dev/null +++ b/detail_png/Shaft_00659_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9376476d0e1f8ee095911c38da15ae99a9ecd8f107c03d17302dac83cfb6ff31 +size 20762 diff --git a/detail_png/Shaft_00659_length.png b/detail_png/Shaft_00659_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8197458507bfc1de4612fe52ed357b7e3694a873 --- /dev/null +++ b/detail_png/Shaft_00659_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6b9e3596fc8712fbfef2fdfe8c5cb803d24e0597a03409cf99a0eba38a77673 +size 15797 diff --git a/detail_png/Shaft_00659_title.png b/detail_png/Shaft_00659_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ef71bcaf976fdd7caf8238321dd5d005b4ec08c --- /dev/null +++ b/detail_png/Shaft_00659_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c9ec6a915c38b3f33df251379afcb9dbbbe2673889d2fc8cdbd1e5d3e24c0af +size 16904 diff --git a/detail_png/Shaft_00663_diam.png b/detail_png/Shaft_00663_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..893c7d02854c33b6b947bf985dedef8b8d704b97 --- /dev/null +++ b/detail_png/Shaft_00663_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85692a118748ea352dde29351462aa55c158e9ab06fb7c592354cc437ae1d8d3 +size 24780 diff --git a/detail_png/Shaft_00663_length.png b/detail_png/Shaft_00663_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a98b269f788234c23112c8f83fb690401987eb45 --- /dev/null +++ b/detail_png/Shaft_00663_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85b109b9fb34439a002a5b1b01cc9bc6c650ec465d5391047e146d78e5b7ec41 +size 30209 diff --git a/detail_png/Shaft_00663_title.png b/detail_png/Shaft_00663_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fc60bd05c00a4d4e55d23c4859efbdae7f6a9767 --- /dev/null +++ b/detail_png/Shaft_00663_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43d780af5f6413c928a125ee04d8da62e0ca722fa67551eee184718b28c057f1 +size 33314 diff --git a/detail_png/Shaft_00667_diam.png b/detail_png/Shaft_00667_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..29d3fe5643b027b56945f5966f0026ef98a6b30f --- /dev/null +++ b/detail_png/Shaft_00667_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:657dbae5b680a0de59778993b61fd631946e89583fbbfda36a8f9b695ea2444e +size 28480 diff --git a/detail_png/Shaft_00667_length.png b/detail_png/Shaft_00667_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bea099f92697771d60233e0c24e32273c1f694db --- /dev/null +++ b/detail_png/Shaft_00667_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1115de7c477361c10a5b53ff8e8bbdec5530493a2c093a7aa3a4328d2b309db +size 25230 diff --git a/detail_png/Shaft_00667_title.png b/detail_png/Shaft_00667_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9806c74f5c0920bcff71ecd4b66bd9d060ab4ce5 --- /dev/null +++ b/detail_png/Shaft_00667_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:600db4f3f41f339a97b04f44ad2cf7da6ff89a54c1a5cbbb7d4c670aa5e9dd84 +size 29729 diff --git a/detail_png/Shaft_00678_diam.png b/detail_png/Shaft_00678_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0c5f16a96b811ef482b1ec6eeb505cee10e178a6 --- /dev/null +++ b/detail_png/Shaft_00678_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4eb419105e7abd3279fd717881d7172b40f95beb9ac49d8a3f9efdc6511b5129 +size 29938 diff --git a/detail_png/Shaft_00678_length.png b/detail_png/Shaft_00678_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a68edbf9e465a60cf35add7b3424660aa113cd2c --- /dev/null +++ b/detail_png/Shaft_00678_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4dc751c3e3f56fe76cc34bad8436056165bd55b4b69043fbc7868091f47a1774 +size 26437 diff --git a/detail_png/Shaft_00678_title.png b/detail_png/Shaft_00678_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b695fb4195cc56eea92ac866680acb9ecc8d0b72 --- /dev/null +++ b/detail_png/Shaft_00678_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07d080493f17a658457c80300e386ee1268389c72e98b8c536483cc9acb3ce5e +size 30670 diff --git a/detail_png/Shaft_00679_diam.png b/detail_png/Shaft_00679_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..256ffef436dfb5442ccbb877f06642fd1f6e9661 --- /dev/null +++ b/detail_png/Shaft_00679_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80545786bcfe8bb875419e5c5838ed065e2e196f4e646af5822e676bdc3e984e +size 18862 diff --git a/detail_png/Shaft_00679_length.png b/detail_png/Shaft_00679_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d170a4cfd3877722f4742c613373431fceaaab1f --- /dev/null +++ b/detail_png/Shaft_00679_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c782889a268ff4b05e174317aec283c6a7c0340a796871c314ca10b148364a4 +size 18722 diff --git a/detail_png/Shaft_00679_title.png b/detail_png/Shaft_00679_title.png new file mode 100644 index 0000000000000000000000000000000000000000..10db7c04d2a8839395d8ed8dd011549cffeac9f3 --- /dev/null +++ b/detail_png/Shaft_00679_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:589a1f093d69203e7e70d8c7e4bbcf20d8dd2a3b6d3e2962a95138addc1768da +size 32384 diff --git a/detail_png/Shaft_00681_diam.png b/detail_png/Shaft_00681_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4a4da807619e7f46858112756cd3c1d10fffd8a9 --- /dev/null +++ b/detail_png/Shaft_00681_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f54a7f416f61ae481fab44daecef66eff79c0bb1f31e8e7825b08d020f4fab9 +size 40631 diff --git a/detail_png/Shaft_00681_length.png b/detail_png/Shaft_00681_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f419e181aa1b04ec379d6652e2d49f7e31d31145 --- /dev/null +++ b/detail_png/Shaft_00681_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:074f2ad53c10e261741ab31ba6e9ce830f8e6b8a4f3c32b89e388d9ab0138bd0 +size 31928 diff --git a/detail_png/Shaft_00681_title.png b/detail_png/Shaft_00681_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ac921dabc0ae98942c0c7a01ea3e66b8a7f0a254 --- /dev/null +++ b/detail_png/Shaft_00681_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaa1870c3f2fb561342c3c0de63de104ae924016b929c05806443fa5269fee98 +size 21303 diff --git a/detail_png/Shaft_00682_diam.png b/detail_png/Shaft_00682_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1fb4bb094b3f9447ae379dcae5b2eeb140870528 --- /dev/null +++ b/detail_png/Shaft_00682_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6828ad28dd2dd00dbd1d1278c1d4a23419925ddf9250e8de021ea0fc80811b61 +size 20454 diff --git a/detail_png/Shaft_00682_length.png b/detail_png/Shaft_00682_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4177d9ff36856d94df729d867f665748d17c785b --- /dev/null +++ b/detail_png/Shaft_00682_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:545b0055d1e4f0ddd89f9be654f81d859ce0118848fd5b111b35a6ba24967758 +size 13635 diff --git a/detail_png/Shaft_00682_title.png b/detail_png/Shaft_00682_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d7a037709a59239ebcc1f7d1b3df8b8046718595 --- /dev/null +++ b/detail_png/Shaft_00682_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b9728fa5dd91145619c21e07a5f0c1790a6a25e69bb18b0b50723f10cdf2ea3 +size 17753 diff --git a/detail_png/Shaft_00683_diam.png b/detail_png/Shaft_00683_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3797cc02b0cb5b7f3c1854eea06804bf1bb9655b --- /dev/null +++ b/detail_png/Shaft_00683_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f5a6ef538686ab7117f81a3ddce7a94b66cd4dc665a694a7d307ba592f46e55 +size 19892 diff --git a/detail_png/Shaft_00683_length.png b/detail_png/Shaft_00683_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a59ea9121d44257b16896e2b6a4b2e145c1d2dda --- /dev/null +++ b/detail_png/Shaft_00683_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46484bd7aa25b7e79fc4022ac659ad2df726d4876bf3a19624c07a9cf58c75f8 +size 18573 diff --git a/detail_png/Shaft_00683_title.png b/detail_png/Shaft_00683_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9d6a08aff95b0821d8c8272b444d4fb9c40a4496 --- /dev/null +++ b/detail_png/Shaft_00683_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2da1999204a5f15a5c0c313180cb7c4b0fab5168b9f0b9fe71d386d29d259c0 +size 23880 diff --git a/detail_png/Shaft_00684_diam.png b/detail_png/Shaft_00684_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..26f9c2f905ca300aa68f9c7a6e43c1859a72da45 --- /dev/null +++ b/detail_png/Shaft_00684_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55032aa3008435ead64cf077727f8b67618b5e087cd9ef8dc473ab026b5f5f98 +size 26261 diff --git a/detail_png/Shaft_00684_length.png b/detail_png/Shaft_00684_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9a0f1d185a36caf83394ac8b1b14b73c0e3d4b06 --- /dev/null +++ b/detail_png/Shaft_00684_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c80e9e715883f232ca477d0cdefd4b522caca0f91cc369d3a72dc0291ccfdd7 +size 36539 diff --git a/detail_png/Shaft_00684_title.png b/detail_png/Shaft_00684_title.png new file mode 100644 index 0000000000000000000000000000000000000000..92cd033ffa665775c0010e4f2ca5189f70e16873 --- /dev/null +++ b/detail_png/Shaft_00684_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:413cd6ffabff0c00d97c0ef8166a91ae7463365ca2537be35596b8f1565c0a85 +size 36637 diff --git a/detail_png/Shaft_00687_diam.png b/detail_png/Shaft_00687_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..220bd738a25f6dd1fb81ec064b746c6bbe469195 --- /dev/null +++ b/detail_png/Shaft_00687_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a4b67ec90c6522e22f77b6cb1d90db311d2e8a27e729d8e828eda709eed3c7c +size 30667 diff --git a/detail_png/Shaft_00687_length.png b/detail_png/Shaft_00687_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b3854bfd11ef357023ab43a6168a666e7b2e48a --- /dev/null +++ b/detail_png/Shaft_00687_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf2880832966c6e4bc1d5cd0c001b106a8deef5904bb8331fb8e0df662911ca5 +size 28592 diff --git a/detail_png/Shaft_00687_title.png b/detail_png/Shaft_00687_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b1e09dc8c664120a21887293fc0be3eefce9f294 --- /dev/null +++ b/detail_png/Shaft_00687_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bbb8beede17af179519fc5eb4c3505e8e56403737a035fe49f269751366a1ba +size 32464 diff --git a/detail_png/Shaft_00688_diam.png b/detail_png/Shaft_00688_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ab204ac7dfa25f6b7aac0015c4c5d7e90b8acbac --- /dev/null +++ b/detail_png/Shaft_00688_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86a2ffe506d11a4a17d661610fc0f4603b8bb793bb7a74d01d9d8b65bb8f873a +size 25121 diff --git a/detail_png/Shaft_00688_length.png b/detail_png/Shaft_00688_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4eca7dfb28089d276a64d462a52e09d7eed19fa7 --- /dev/null +++ b/detail_png/Shaft_00688_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:747a646f01f4d1598f315e97df3acf4c98e5a5b8fdd0ee10269eb50e422cba2e +size 19089 diff --git a/detail_png/Shaft_00688_title.png b/detail_png/Shaft_00688_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ab3e7c4f4812171ddd5e3cf55b4067a8a3dde9f1 --- /dev/null +++ b/detail_png/Shaft_00688_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4035f9a95e9e63988cb722af08d4ff0f80c650ff95173f7e824e6a8c87ae20d +size 16546 diff --git a/detail_png/Shaft_00703_diam.png b/detail_png/Shaft_00703_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..08430d29d1ad64c54456b330655aee2344dac532 --- /dev/null +++ b/detail_png/Shaft_00703_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e2b70d69a721792453f8316a419c3b79303fef9f04065ab25ec72810df79421 +size 20409 diff --git a/detail_png/Shaft_00703_length.png b/detail_png/Shaft_00703_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a48a8e55520ed89e708cd66288247b6ecce9e52 --- /dev/null +++ b/detail_png/Shaft_00703_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbb5085b6a3934ae221bbfb5441c6d015f78e64322fba3a8cfe335a265e1018d +size 15986 diff --git a/detail_png/Shaft_00703_title.png b/detail_png/Shaft_00703_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c623a642952927a126d3eb4c7c2203225e45ba1 --- /dev/null +++ b/detail_png/Shaft_00703_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b47dc048f4ae9b4ac696bdcfca731d1d569aa1c9460f896827e15dc33bd4cce +size 16354 diff --git a/detail_png/Shaft_00704_diam.png b/detail_png/Shaft_00704_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..12e5ceb123768966b14bbea512f6f92c432ca656 --- /dev/null +++ b/detail_png/Shaft_00704_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4681ee4cd46ba703c96375f6028972fc43175769ba67c89fea4f6682f151df9 +size 18987 diff --git a/detail_png/Shaft_00704_length.png b/detail_png/Shaft_00704_length.png new file mode 100644 index 0000000000000000000000000000000000000000..543fe5030f846eb848fc216fdb27839c97a3a35b --- /dev/null +++ b/detail_png/Shaft_00704_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17407e6a012bb7991407465b9d040a4d38e6a4fa88b8511097e915241411fa99 +size 15911 diff --git a/detail_png/Shaft_00704_title.png b/detail_png/Shaft_00704_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9d7b164c3e33cbb6e7c509447e90a32ab3f7db8f --- /dev/null +++ b/detail_png/Shaft_00704_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6346d0c12d22945f3fe16f700577d8b272c09755d2d6b12fbbec6ef3eed0b51d +size 17229 diff --git a/detail_png/Shaft_00708_diam.png b/detail_png/Shaft_00708_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f7bd855a855d6abc3c4be182adc65c21a0ca5d52 --- /dev/null +++ b/detail_png/Shaft_00708_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0f72907b0181b7b30fdc45214b27b9a3fc40f6cac612859d7b40e00638e5c40 +size 25875 diff --git a/detail_png/Shaft_00708_length.png b/detail_png/Shaft_00708_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8e0b5f1a0a81504c0e98b074ffb668afda4a7a44 --- /dev/null +++ b/detail_png/Shaft_00708_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a31e54d42f6f716b0aeba40a76b116791cb8609d433d3bb60872415a2f156888 +size 22489 diff --git a/detail_png/Shaft_00708_title.png b/detail_png/Shaft_00708_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f549ad9235a3d6cff6182d452271ba3b2bad8dce --- /dev/null +++ b/detail_png/Shaft_00708_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b50da6bc2c42d2b81ac4f380435ccc52c4d1043441dd17354ac26a1e35246d4 +size 29265 diff --git a/detail_png/Shaft_00709_diam.png b/detail_png/Shaft_00709_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c0fb74a91194033d93703c80bb3b9e3d95362356 --- /dev/null +++ b/detail_png/Shaft_00709_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02bf07788b295769474277ec92315fecd1500caf3b493b7fb295be9214528518 +size 31461 diff --git a/detail_png/Shaft_00709_length.png b/detail_png/Shaft_00709_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b425a7344849abaf2a84ae881744d3b96b49515b --- /dev/null +++ b/detail_png/Shaft_00709_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b87ff1c348e7136261114f7e47677240df5b5178d5c83b8f0e85aba2b716f52 +size 42960 diff --git a/detail_png/Shaft_00709_title.png b/detail_png/Shaft_00709_title.png new file mode 100644 index 0000000000000000000000000000000000000000..afacd5c10a61a709ba7b0c422cd69a240156f403 --- /dev/null +++ b/detail_png/Shaft_00709_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06ad3d56c8959edea88d57fdcab5643a203c6c4877aec80eac0f034ba0836548 +size 32715 diff --git a/detail_png/Shaft_00715_diam.png b/detail_png/Shaft_00715_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aa15c34b40f50be112000ca174c4a473d76ccef1 --- /dev/null +++ b/detail_png/Shaft_00715_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b21942901296a1421fbba7cbc7061ce3592127a3c461e514d3d2f4d35541d23 +size 27763 diff --git a/detail_png/Shaft_00715_length.png b/detail_png/Shaft_00715_length.png new file mode 100644 index 0000000000000000000000000000000000000000..262aa3d16c5e460b038e38ac2c9abc2fe4a05219 --- /dev/null +++ b/detail_png/Shaft_00715_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e0569d2603bc3499d29863ad7bbf3457273a952d996731f52334e2364de0d72 +size 26298 diff --git a/detail_png/Shaft_00715_title.png b/detail_png/Shaft_00715_title.png new file mode 100644 index 0000000000000000000000000000000000000000..969a0e3094330feb469113c2b721bce0a3439a50 --- /dev/null +++ b/detail_png/Shaft_00715_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63d6509c0df24375e8aade9c48c3c5a60b1e800bc896a6d00cab8200be6e02e4 +size 30908 diff --git a/detail_png/Shaft_00716_diam.png b/detail_png/Shaft_00716_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b1f0e91ec8daa115c98bfcf6c3b630d2e042f1ce --- /dev/null +++ b/detail_png/Shaft_00716_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dad6ea64b8d88d1f5075f38779e37b05aa2513db4238a961d00023ac4eab2ef4 +size 25453 diff --git a/detail_png/Shaft_00716_length.png b/detail_png/Shaft_00716_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a6c011fe2843e64d1013f1e48c3c4d787c55d5b0 --- /dev/null +++ b/detail_png/Shaft_00716_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a5dc6a9e1a8ff00cfaedeacc065e58c229c4fdc1bc758489cc1629ef496c13f +size 34239 diff --git a/detail_png/Shaft_00716_title.png b/detail_png/Shaft_00716_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4cfa88ced8a4144ad878ee68918ed5c763ba0b8b --- /dev/null +++ b/detail_png/Shaft_00716_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5ad4b51e414ebae18416c0b35f74318041e6e18362a847011c1dcb208bb0dc1 +size 28771 diff --git a/detail_png/Shaft_00719_diam.png b/detail_png/Shaft_00719_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d6f7a270f5ad9c51899dc5ec0728387b5cd478f4 --- /dev/null +++ b/detail_png/Shaft_00719_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69032f8e9aa241b5d87b88d43ecba30a6bacff9413288723941e7d0b123644f1 +size 24695 diff --git a/detail_png/Shaft_00719_length.png b/detail_png/Shaft_00719_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dfba8431c1b284ed91e22ebfaeb4aef987fb161e --- /dev/null +++ b/detail_png/Shaft_00719_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:923bf398b296c5189bed2380913e3892963017a3e6f7245523e6b97114a3fedb +size 35416 diff --git a/detail_png/Shaft_00719_title.png b/detail_png/Shaft_00719_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2fc25ec2875db2459c56f72358e3d967c33911ce --- /dev/null +++ b/detail_png/Shaft_00719_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ab71d29a9f3e89e530416dc2429ce1f7ddae87a0fb6113c1a4bf16313ac594b +size 35213 diff --git a/detail_png/Shaft_00720_diam.png b/detail_png/Shaft_00720_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9f56a0d7501dd7570edd993d40029189cd0e3755 --- /dev/null +++ b/detail_png/Shaft_00720_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e07ee62c653777943ed906db4f31986c2df7e0a159ad3938adf0ef51ac010792 +size 25515 diff --git a/detail_png/Shaft_00720_length.png b/detail_png/Shaft_00720_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dd385998d64a05f673df1ab84abceeb490185b6d --- /dev/null +++ b/detail_png/Shaft_00720_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70aa796890262c047bb4f20008b2bc6de299d50791a802803226d6f7e0cd6277 +size 20539 diff --git a/detail_png/Shaft_00720_title.png b/detail_png/Shaft_00720_title.png new file mode 100644 index 0000000000000000000000000000000000000000..982ee05ab1370b14dec70ea79b5456a60e46a0d1 --- /dev/null +++ b/detail_png/Shaft_00720_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6c361cb847f7ed7c33e332056123dc698cca8db95a9c2f108858a42b5e02b99 +size 22118 diff --git a/detail_png/Shaft_00727_diam.png b/detail_png/Shaft_00727_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7a7be95aa5788079ede352178ab1c9b3b1e8313f --- /dev/null +++ b/detail_png/Shaft_00727_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:658903393a733157025e16e3f882c3802616279953ec109fc346cbe15cb88267 +size 22384 diff --git a/detail_png/Shaft_00727_length.png b/detail_png/Shaft_00727_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a74fe29bfe132f2e1484397e650990b180b9cd14 --- /dev/null +++ b/detail_png/Shaft_00727_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ed5a15803a2c46a6a7a244efa8076b46d595396553b7cb79b18c41aad5e7c86 +size 24308 diff --git a/detail_png/Shaft_00727_title.png b/detail_png/Shaft_00727_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f1d4391b3cc4f9c136edb3bf43a2807f8848f7f2 --- /dev/null +++ b/detail_png/Shaft_00727_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e8c16576deb3966c13f77576a991285d8fe96f6e6441b3489ae32425c6c32b7 +size 31278 diff --git a/detail_png/Shaft_00728_diam.png b/detail_png/Shaft_00728_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..83bf99c7142d5f84ee703c9cae97f7308723ec2f --- /dev/null +++ b/detail_png/Shaft_00728_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2b86083019bfe779f906e4c8fd05e6171627c250874331094ea243991347bac +size 30757 diff --git a/detail_png/Shaft_00728_length.png b/detail_png/Shaft_00728_length.png new file mode 100644 index 0000000000000000000000000000000000000000..878bdce78ff96d2e1da7b18dd506c0263902ffee --- /dev/null +++ b/detail_png/Shaft_00728_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6dbb9d41196fcb832015caa7bb9ce7c59f650ae1f5f5fe102e10af2b5a9c2eb +size 39922 diff --git a/detail_png/Shaft_00728_title.png b/detail_png/Shaft_00728_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b72177c9d9bdf35474b9512f9d53a54ca86fea93 --- /dev/null +++ b/detail_png/Shaft_00728_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e7b2eb6a3c1639d7c2391fbb56e18f81a7d1e3f2d4c41d1f37d6f0ac17ad1d2 +size 29896 diff --git a/detail_png/Shaft_00733_diam.png b/detail_png/Shaft_00733_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c3b95c32b19a372fa0676b13c87d54349f214c74 --- /dev/null +++ b/detail_png/Shaft_00733_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3626044be73125ef539968d0dd567d4045ab27f39e1ae2070c7d08cc358f379 +size 36305 diff --git a/detail_png/Shaft_00733_length.png b/detail_png/Shaft_00733_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7db4c9b13159fb54cd26057608e999d4d4eddb35 --- /dev/null +++ b/detail_png/Shaft_00733_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b1d95d498c2f64da3cb35c1d7b3e815d4874296bc2e07f3a001da45977dc60a +size 52047 diff --git a/detail_png/Shaft_00733_title.png b/detail_png/Shaft_00733_title.png new file mode 100644 index 0000000000000000000000000000000000000000..45dd534e87f99d62a0d93e9d690a0c3ec57af76a --- /dev/null +++ b/detail_png/Shaft_00733_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6d14d77d2673586915848407e5fa42a6953e42842e61ab511e65b63bb870c6b +size 30710 diff --git a/detail_png/Shaft_00737_diam.png b/detail_png/Shaft_00737_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c16d67b48eeb205dc1d9edb38be70b8209c337a8 --- /dev/null +++ b/detail_png/Shaft_00737_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a233b0464f45d9bff4db7117c64ef9ac0a8876dc26a1c9214531b5d6dd71be6 +size 18081 diff --git a/detail_png/Shaft_00737_length.png b/detail_png/Shaft_00737_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac17b579ab9792b745a6cd95b8556a6935097ccb --- /dev/null +++ b/detail_png/Shaft_00737_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8db8cbf9f6333724e9ef1f37254dfaab55727edc0c2c72f9206da77e7f85ef1e +size 16008 diff --git a/detail_png/Shaft_00737_title.png b/detail_png/Shaft_00737_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0321fec8589ee8d5a06adcef8cd55e77f9a2065b --- /dev/null +++ b/detail_png/Shaft_00737_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:631e165eba1d780d73663b7459d2cfb8e37b153a4d39fa31dc17615708a64b7d +size 19272 diff --git a/detail_png/Shaft_00744_diam.png b/detail_png/Shaft_00744_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c11c6ca5f4002cd733c3f3c5f9753a0eca849838 --- /dev/null +++ b/detail_png/Shaft_00744_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d19fefcb48d4cb8f01ec713e94015f99fa606f1b0a62b7f6d660ebe24b16d40e +size 30091 diff --git a/detail_png/Shaft_00744_length.png b/detail_png/Shaft_00744_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2fa7d6676fdd4b6f38a1cbe50d562156da598cdc --- /dev/null +++ b/detail_png/Shaft_00744_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d7a8ade0ed154092f42284b7504d7eb64eb53ebb205fda89cd4ef290d0cfea9 +size 23318 diff --git a/detail_png/Shaft_00744_title.png b/detail_png/Shaft_00744_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7280f193bc38860da22a94165f4f360298f4bcc4 --- /dev/null +++ b/detail_png/Shaft_00744_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:944f566d330472b60d5e89c88d3d0eb6709faccd9bd46d38cc67653f01b2449a +size 21974 diff --git a/detail_png/Shaft_00758_diam.png b/detail_png/Shaft_00758_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..809c994239678c1656bcb6f6fea7b665bc0dc3c0 --- /dev/null +++ b/detail_png/Shaft_00758_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a783226d781c93c6fc51ea24b18942cae465c44cd24912389147d886977fe029 +size 34355 diff --git a/detail_png/Shaft_00758_length.png b/detail_png/Shaft_00758_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b382a015100d8657cadf11b4737a85cd9c8a209 --- /dev/null +++ b/detail_png/Shaft_00758_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b60698527fa0a17b313ea43f8c8462e9238f0550b45d17fbc4928d82dd57ff84 +size 33058 diff --git a/detail_png/Shaft_00758_title.png b/detail_png/Shaft_00758_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1eac85208f14065dd8bf70436b709bab2d15b15d --- /dev/null +++ b/detail_png/Shaft_00758_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a22a19f39c06a81100251af9c7991b50fe37b27870c02ee1ca53077504006543 +size 32439 diff --git a/detail_png/Shaft_00763_diam.png b/detail_png/Shaft_00763_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..65cfe90823c0469d107988335f8cc20480c328f2 --- /dev/null +++ b/detail_png/Shaft_00763_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48f4f3f8a2ae8f2bf8b8ed331997459cf5797ba3e7f10581264100b075e1a62 +size 29051 diff --git a/detail_png/Shaft_00763_length.png b/detail_png/Shaft_00763_length.png new file mode 100644 index 0000000000000000000000000000000000000000..019958879ea9407b5bd309b280ece59a9479a7a7 --- /dev/null +++ b/detail_png/Shaft_00763_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fc729d0d7e7ccbc13f9c3ee963ba72322f19e0517f8206650ac466474dc5557 +size 34522 diff --git a/detail_png/Shaft_00763_title.png b/detail_png/Shaft_00763_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a66103542e76c7855ce7a5f19786fb4e0fc02940 --- /dev/null +++ b/detail_png/Shaft_00763_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c251d63ec60b4696ee42b3e9046feb16208898d13c6884f4db98b0dfc852011 +size 32825 diff --git a/detail_png/Shaft_00768_diam.png b/detail_png/Shaft_00768_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f6897fe57beb6a532600edb9aac53aa0c1af0b14 --- /dev/null +++ b/detail_png/Shaft_00768_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd0b14983e34797faff4c5fd9f21c79aeae0d9eeb3a6e91234bbd61d7a3d3a59 +size 31236 diff --git a/detail_png/Shaft_00768_length.png b/detail_png/Shaft_00768_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7d3e4b1bf5e8ff47cbdf0ff19cffba889ab7121c --- /dev/null +++ b/detail_png/Shaft_00768_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f40eb01ef586d9d7b30996571a40380151c41c117e52599e7a7c3699e5911270 +size 45239 diff --git a/detail_png/Shaft_00768_title.png b/detail_png/Shaft_00768_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c729d45c6ee55377fbaee413cabe7aa75d28c340 --- /dev/null +++ b/detail_png/Shaft_00768_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d22f53d80b8685f76e9e1188d7f8f3480e050f6f9b52a6cc68d907611b76ef0 +size 36583 diff --git a/detail_png/Shaft_00771_diam.png b/detail_png/Shaft_00771_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6e937316e1a0a6ddaf380d4bf4f38d98504bf4f0 --- /dev/null +++ b/detail_png/Shaft_00771_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d071bb5ef3ce1591d30c04534fb651b85f08fd8a985afc5a624e3131866ac02 +size 24906 diff --git a/detail_png/Shaft_00771_length.png b/detail_png/Shaft_00771_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8a3f62d2dbc9a45f96d5382e3033eecaf7d33390 --- /dev/null +++ b/detail_png/Shaft_00771_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bccdd5322488010148c9baab238c0f9a1d1fb6f476e900874c675337c280ad2 +size 20825 diff --git a/detail_png/Shaft_00771_title.png b/detail_png/Shaft_00771_title.png new file mode 100644 index 0000000000000000000000000000000000000000..af5cf330f8410a836a1952b56d087a100f014086 --- /dev/null +++ b/detail_png/Shaft_00771_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:734b05d2707c6d1129183c01e625f1ff5e74adbe59c1dd8d4f58888904d386bd +size 25968 diff --git a/detail_png/Shaft_00772_diam.png b/detail_png/Shaft_00772_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..89927635e28be96b3769325ac865672876c49ec0 --- /dev/null +++ b/detail_png/Shaft_00772_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:570254a39fc398adf92c41e4235cdf3f0ed9999aa33e0795a2482b49a964e5f9 +size 19803 diff --git a/detail_png/Shaft_00772_length.png b/detail_png/Shaft_00772_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d3e978ac502557bc4cb6bfac567282427d99c5b5 --- /dev/null +++ b/detail_png/Shaft_00772_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f3077e85243fb301fdb840d0c9ce9f6324a7a046d6892fa72dc968f34937602 +size 15078 diff --git a/detail_png/Shaft_00772_title.png b/detail_png/Shaft_00772_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3a9476cc44c6062db139a765d1c249466a5e4d80 --- /dev/null +++ b/detail_png/Shaft_00772_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56a41a8b08bd35e2a303c1cb6bdb958fe282a01f6e4defbe3e9e2b3721904d0b +size 17168 diff --git a/detail_png/Shaft_00775_diam.png b/detail_png/Shaft_00775_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8f758ad1ebbe4020c0a7e33423e17cd55662fcb3 --- /dev/null +++ b/detail_png/Shaft_00775_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5b5fb587a3307b6b51d49b6d8247889672001d4cabae38e728f833cebbc3f57 +size 38724 diff --git a/detail_png/Shaft_00775_length.png b/detail_png/Shaft_00775_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8072ff0e9ac2786870bac15f305868da16bf9a2f --- /dev/null +++ b/detail_png/Shaft_00775_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab962286aea58068c68dfba88e80a089e152ddb4f091f09b3f131690802d97b9 +size 36469 diff --git a/detail_png/Shaft_00775_title.png b/detail_png/Shaft_00775_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c6a6c5adc2ba3c738242dd1316f52c00bf9fce63 --- /dev/null +++ b/detail_png/Shaft_00775_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:666a2156a48ae17827eaad1c4bf04c119286b347fdbaf8dd271b5a9a214b8ac4 +size 34627 diff --git a/detail_png/Shaft_00779_diam.png b/detail_png/Shaft_00779_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97bd4558d0471634baf8528af7e9e3eae22c3567 --- /dev/null +++ b/detail_png/Shaft_00779_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65e7cfcf2aca6a91f601c05f68483c7e39b7c322178df5e77840f99353f8e674 +size 29067 diff --git a/detail_png/Shaft_00779_length.png b/detail_png/Shaft_00779_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c0ce7a992fad25f36dde2c6e38e075f92ad5331b --- /dev/null +++ b/detail_png/Shaft_00779_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a432bd890166bac2612ad972e6b1cfa2f760a45375eb293232980f8a9263e7dc +size 39546 diff --git a/detail_png/Shaft_00779_title.png b/detail_png/Shaft_00779_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4a8a57c9a09f9e96ee0bb8dad722e7a0089efa44 --- /dev/null +++ b/detail_png/Shaft_00779_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b5fb627060ca9de821c4d6541d476447704108dcc081d3d1f1923f104111c8b +size 35622 diff --git a/detail_png/Shaft_00784_diam.png b/detail_png/Shaft_00784_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0ee177b328f9aace759eff03ec30ec4489997f29 --- /dev/null +++ b/detail_png/Shaft_00784_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bd369ca14d021b865deed8adf9a6591c416e16b3bf161e287bb87b56b7e2d9d +size 39384 diff --git a/detail_png/Shaft_00784_length.png b/detail_png/Shaft_00784_length.png new file mode 100644 index 0000000000000000000000000000000000000000..72f31b0531d7f3d749878c2d9fd9ad9f18198769 --- /dev/null +++ b/detail_png/Shaft_00784_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:874fa3598031191a6c424e5c7bc62512d10c374161241aa4d175717e0263e3dc +size 36640 diff --git a/detail_png/Shaft_00784_title.png b/detail_png/Shaft_00784_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0f60d41b54f47310c1df3bb2be9a304be44b8c38 --- /dev/null +++ b/detail_png/Shaft_00784_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55880997379a51bd2a98122c3ac10aecdd361830922e17fb73919a87eee876a6 +size 35173 diff --git a/detail_png/Shaft_00787_diam.png b/detail_png/Shaft_00787_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8c5b1684dce09e43bf754dd30c9b9419b691cb36 --- /dev/null +++ b/detail_png/Shaft_00787_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca6591c7bac02f6ece06fc0dacdede7c2d079992194fc77d0fb9c6a8d29265eb +size 25973 diff --git a/detail_png/Shaft_00787_length.png b/detail_png/Shaft_00787_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3acc0504661bdb07f9bb86bbb022720fe2d9d5fc --- /dev/null +++ b/detail_png/Shaft_00787_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:838224aea72177aad9cf730c0fa106d9ebabe32f1ada8187beff428a496fc22a +size 28406 diff --git a/detail_png/Shaft_00787_title.png b/detail_png/Shaft_00787_title.png new file mode 100644 index 0000000000000000000000000000000000000000..56d5ba0934b07c46ece7f7843d7fb823456261eb --- /dev/null +++ b/detail_png/Shaft_00787_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07def52b1e0a6fa77aa36754d62fd1581a11d1b5475442219fc569fb9f3e519b +size 31699 diff --git a/detail_png/Shaft_00794_diam.png b/detail_png/Shaft_00794_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7cd292b9b0f497f37df2a62f42df16659b9d788b --- /dev/null +++ b/detail_png/Shaft_00794_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8975f409fe4d566ea547843a377db3fee4cab003c6e50583eddcfd1331f859f9 +size 20161 diff --git a/detail_png/Shaft_00794_length.png b/detail_png/Shaft_00794_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9fad8d236f8c2c8e4a7608c5a8ced12a7c698594 --- /dev/null +++ b/detail_png/Shaft_00794_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:369912df35d63bd9a048ff4f24d819167dee58bb4bd31efb8daf2ac002e28b71 +size 13576 diff --git a/detail_png/Shaft_00794_title.png b/detail_png/Shaft_00794_title.png new file mode 100644 index 0000000000000000000000000000000000000000..75e0ec27596d5132574c8d8839cf78bbb859c27c --- /dev/null +++ b/detail_png/Shaft_00794_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35580f43394fcbe5ef3c1a7e72a55c83b41e4fdb2fab390e57d561c9076f238e +size 18340 diff --git a/detail_png/Shaft_00800_diam.png b/detail_png/Shaft_00800_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2e8c09202a51cc84b35040b05a8521330e471e50 --- /dev/null +++ b/detail_png/Shaft_00800_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78d502897338af0d00161e9d57709eee17eaaa42b10d0db48248282935512641 +size 18834 diff --git a/detail_png/Shaft_00800_length.png b/detail_png/Shaft_00800_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9a16b88901cd49abc39693878b862a7c20f97d06 --- /dev/null +++ b/detail_png/Shaft_00800_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de8ce2118db8fbf0c261629d889678f04392e06126480f236b1242590b7fe521 +size 15903 diff --git a/detail_png/Shaft_00800_title.png b/detail_png/Shaft_00800_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0619fdd6c9b37d2a4cb1dafa1df602f214feb2dc --- /dev/null +++ b/detail_png/Shaft_00800_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:798510a79fcb9838966b0658a519910e8fa0e8d2a61351a78a75e40d1e787012 +size 25657 diff --git a/detail_png/Shaft_00801_diam.png b/detail_png/Shaft_00801_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..54ef0481e2f6db25bb6653f6c60a1cd8f32936a9 --- /dev/null +++ b/detail_png/Shaft_00801_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d31c629722ababf5a14305c6376ace8c00867ddaec9ff83d6e060f513dd50b58 +size 25734 diff --git a/detail_png/Shaft_00801_length.png b/detail_png/Shaft_00801_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a9a8b03b50af927375bde98973efc34461c247b0 --- /dev/null +++ b/detail_png/Shaft_00801_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2ca1884da538952c6a95b3f7ff4492c69cbf3c0a93ac42474135990580606e3 +size 24345 diff --git a/detail_png/Shaft_00801_title.png b/detail_png/Shaft_00801_title.png new file mode 100644 index 0000000000000000000000000000000000000000..90d0598ee126cca29fd59d23307e0eff0d505596 --- /dev/null +++ b/detail_png/Shaft_00801_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8410e1adbc58ea05e67c9b60293548c6e521207a8e16bc8aa09845cad03fe820 +size 32058 diff --git a/detail_png/Shaft_00805_diam.png b/detail_png/Shaft_00805_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a58054cbf5113efc7b3c568d4baaa0c430dc33f9 --- /dev/null +++ b/detail_png/Shaft_00805_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c74bfacc6a219e1137e2f968b665801b452bfbb11356356200b7044db22ee416 +size 24425 diff --git a/detail_png/Shaft_00805_length.png b/detail_png/Shaft_00805_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a4f63ae9991cfb9c2ab88643368744ebe437591b --- /dev/null +++ b/detail_png/Shaft_00805_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad656e4b859d7777fa5fcfea1dea588a2099c42e5fa3371e7917f8d849e1d550 +size 21180 diff --git a/detail_png/Shaft_00805_title.png b/detail_png/Shaft_00805_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6b5fb65ec3e9464eac208f740ef2c31f4623e157 --- /dev/null +++ b/detail_png/Shaft_00805_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0102e92efc01143cf6e59dc7b26185be782b7f71685ca20cf5df0c03222ce1a3 +size 22470 diff --git a/detail_png/Shaft_00812_diam.png b/detail_png/Shaft_00812_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..57953d8abd732d48f5ca95d3222a94cd1b879503 --- /dev/null +++ b/detail_png/Shaft_00812_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9609a57d3e5c6910a43175c25d75154a6ed8dc83e39982096fc5615d571d7d1 +size 34313 diff --git a/detail_png/Shaft_00812_length.png b/detail_png/Shaft_00812_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b21b1e62d2a4703f23077bf733605db924e56cf2 --- /dev/null +++ b/detail_png/Shaft_00812_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:816bfeca75b046a573068ad6d6e4b4b2c1a12b89b86536d829fdc24d37d1a1d4 +size 33372 diff --git a/detail_png/Shaft_00812_title.png b/detail_png/Shaft_00812_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c5ca8f3c49213f11adcdb15e896ea19840e6521 --- /dev/null +++ b/detail_png/Shaft_00812_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc355ff015b173c3c8f5ecc93b9b67021fc92e90f13f5edea5d04724e17ec38b +size 32048 diff --git a/detail_png/Shaft_00815_diam.png b/detail_png/Shaft_00815_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b4a78311a797fb3920e727d85713ba7beac0008f --- /dev/null +++ b/detail_png/Shaft_00815_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f407da8b3563a17a06f93d6f1e8096fa5bda61574171cb489f6251d7684c1249 +size 31823 diff --git a/detail_png/Shaft_00815_length.png b/detail_png/Shaft_00815_length.png new file mode 100644 index 0000000000000000000000000000000000000000..04a7c920772019988059ff2d6f30ffc9b4342864 --- /dev/null +++ b/detail_png/Shaft_00815_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a293b7dd1ab10bdd70d5450c94a00fde7f398a9ffdb61bb31d104f559541d948 +size 35828 diff --git a/detail_png/Shaft_00815_title.png b/detail_png/Shaft_00815_title.png new file mode 100644 index 0000000000000000000000000000000000000000..190c76ccbd3e19373d4c4e1dd6bc34f8c6802113 --- /dev/null +++ b/detail_png/Shaft_00815_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f33fbf07a3aae1966cc792c3dbfb4705e32cc9ed26d4b65dfb1eebd11dc2d6d8 +size 32197 diff --git a/detail_png/Shaft_00817_diam.png b/detail_png/Shaft_00817_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..843be91563770d033ae971c7e3cc1b4c1b7d3a72 --- /dev/null +++ b/detail_png/Shaft_00817_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03806618fef97b28bf637adfff3853b1d87a6188c2cc38a30dc6bdb0c10476d5 +size 24326 diff --git a/detail_png/Shaft_00817_length.png b/detail_png/Shaft_00817_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1bee270a9ec3b9819dcbd37aed80f8cb03f19d85 --- /dev/null +++ b/detail_png/Shaft_00817_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6331ea10e4fa3be0df54b262bf2a5a50de4c119818b52fef517fe1b3c8f4e45 +size 18757 diff --git a/detail_png/Shaft_00817_title.png b/detail_png/Shaft_00817_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2e644cc52e490ea77871b711dbe9dc6eed46aeb1 --- /dev/null +++ b/detail_png/Shaft_00817_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed4d0c02d1a4d5c67ef62e98b1f83aeb6ac6b686b4a20a8d5986fc37d65cedd9 +size 18827 diff --git a/detail_png/Shaft_00826_diam.png b/detail_png/Shaft_00826_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a2e748c35faef7399002e624379a5c0dae269169 --- /dev/null +++ b/detail_png/Shaft_00826_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74a5f23501ca9d77e418e4c994f06cf69df08d4850da9508886e896e1ff40545 +size 19846 diff --git a/detail_png/Shaft_00826_length.png b/detail_png/Shaft_00826_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac37a97412bc37e2b600427f795e26ad879fed5f --- /dev/null +++ b/detail_png/Shaft_00826_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5af5e425bdd426018c98b1453619c65e6df4e2de6dfdc87f5b996fb2b7476719 +size 17843 diff --git a/detail_png/Shaft_00826_title.png b/detail_png/Shaft_00826_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1c137c0475fa862fce966818c888a7e48f1e1c71 --- /dev/null +++ b/detail_png/Shaft_00826_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:181e81a97b4d01b330e5c36a4c54124ebd631edab35bf2977f1e46a7f47b40d4 +size 20565 diff --git a/detail_png/Shaft_00837_diam.png b/detail_png/Shaft_00837_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0331a8fc5dc40c171c4fa36979d5a03677941257 --- /dev/null +++ b/detail_png/Shaft_00837_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61be04acd40996daf48db9a73e5938dd8356b6a8704869a439a96e568999b64a +size 31410 diff --git a/detail_png/Shaft_00837_length.png b/detail_png/Shaft_00837_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cea5b453e50f67471e6565a7a609b1a6bdf67723 --- /dev/null +++ b/detail_png/Shaft_00837_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:225b163fec68fbc8136a4563b17e2cc01d5a39c8288d8875d2af8283693571fa +size 33701 diff --git a/detail_png/Shaft_00837_title.png b/detail_png/Shaft_00837_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1897c5da2a9c357cae670ef58fa274c7b41c6367 --- /dev/null +++ b/detail_png/Shaft_00837_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53e1453da7d2b2f90a897b3efad7c9a71ba64b6f4ae273c8be5b4fdd0d809747 +size 32517 diff --git a/detail_png/Shaft_00851_diam.png b/detail_png/Shaft_00851_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..15bdbd995a9a5251b94c7411e8c7fa10eecf2971 --- /dev/null +++ b/detail_png/Shaft_00851_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:685a9bc84e85ccdfe3f22f2228e559e18cf88e7921d2b6042672445cf0c76b34 +size 25732 diff --git a/detail_png/Shaft_00851_length.png b/detail_png/Shaft_00851_length.png new file mode 100644 index 0000000000000000000000000000000000000000..438f145c027216498fb63ddec5d339904aad95b3 --- /dev/null +++ b/detail_png/Shaft_00851_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d130c4b9709ee70cb5af152d8c3cf1b0a6161d96a1a29b22e773addd247f9537 +size 34525 diff --git a/detail_png/Shaft_00851_title.png b/detail_png/Shaft_00851_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ef96f9f36240e590e3a37fe14419942762201dfb --- /dev/null +++ b/detail_png/Shaft_00851_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc3d11fb9660f012187350641e7597aa26d9115fe3d5cfde39268e34140bd3c8 +size 35879 diff --git a/detail_png/Shaft_00852_diam.png b/detail_png/Shaft_00852_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0fcec5810ff58d495260abfd34757ff8a9320519 --- /dev/null +++ b/detail_png/Shaft_00852_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98641b557841bc4655329a8451e5a23f6101c146fd424597fe1b5dd3c5e48d2e +size 35418 diff --git a/detail_png/Shaft_00852_length.png b/detail_png/Shaft_00852_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3809a91c4504e61a54d7f14546d3f2d2204a7f40 --- /dev/null +++ b/detail_png/Shaft_00852_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d049a2b6a23b351be055ce1fd86b5fb394d8bdc486fceab04f51a5dce6bfc34d +size 45040 diff --git a/detail_png/Shaft_00852_title.png b/detail_png/Shaft_00852_title.png new file mode 100644 index 0000000000000000000000000000000000000000..21576868bcdbd3c1cc92fb1da32d0d865b8508cd --- /dev/null +++ b/detail_png/Shaft_00852_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9deb36f8092f5a6bdd54bd26d862dbd69129628ba28e71bd7d6eca3c79442fec +size 36521 diff --git a/detail_png/Shaft_00858_diam.png b/detail_png/Shaft_00858_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3542540e7fd25c7c8f6ee43ef0e98658a681862e --- /dev/null +++ b/detail_png/Shaft_00858_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adda7ea9547d1475f1813b9ebf2a96774b2f3282b0ef30ca196c9488567ba6b8 +size 22957 diff --git a/detail_png/Shaft_00858_length.png b/detail_png/Shaft_00858_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c1391d81822c3e9340175d7c3352feb19011ec90 --- /dev/null +++ b/detail_png/Shaft_00858_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e64ccb3178e9d026e9a4875a3556f79f05e80c21e6bfee483b23a6c6cd590aa9 +size 19318 diff --git a/detail_png/Shaft_00858_title.png b/detail_png/Shaft_00858_title.png new file mode 100644 index 0000000000000000000000000000000000000000..11a4975f742e7a5ea443edb1b469b96d549bfa7b --- /dev/null +++ b/detail_png/Shaft_00858_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3f35d122520257695e6f7d6618f7d654e6d33ae99e86522f44a0cd9e02f2a29 +size 24849 diff --git a/detail_png/Shaft_00864_diam.png b/detail_png/Shaft_00864_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fe4791e245312f082552ecce1bfc61c64ce1c740 --- /dev/null +++ b/detail_png/Shaft_00864_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16e0e9b9d135c83ea38c3aaa9a0a7f42635d1d0de689cf804d27afdf3d5edea1 +size 28433 diff --git a/detail_png/Shaft_00864_length.png b/detail_png/Shaft_00864_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b17f2aa1028512990920a59ffdeaafd53b9d8af5 --- /dev/null +++ b/detail_png/Shaft_00864_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75b4047519c32ff90eecf4711836c14426cb259a23846391f6d0d1be99296b3f +size 34249 diff --git a/detail_png/Shaft_00864_title.png b/detail_png/Shaft_00864_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cea2335d167f3d32dada63040137ba9d8fcdad63 --- /dev/null +++ b/detail_png/Shaft_00864_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db6c94840c66997beceb6ac7f55b5d8a014fe9dc7195ec13f4788cb1d062c3c1 +size 30461 diff --git a/detail_png/Shaft_00866_diam.png b/detail_png/Shaft_00866_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3c76bcb34faf4d7903a5dfd2beede648d2022c9a --- /dev/null +++ b/detail_png/Shaft_00866_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcebc7a2b9f1f3c5ea004435e72b24520208c993f5a5091a588ab1352359fdde +size 20572 diff --git a/detail_png/Shaft_00866_length.png b/detail_png/Shaft_00866_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f88cc240d6a49925cb22ef39768b050344b4c704 --- /dev/null +++ b/detail_png/Shaft_00866_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:500946a1f576bf0e182f9dc81e40b83a81000e34b46953f9188436961a68c270 +size 21473 diff --git a/detail_png/Shaft_00866_title.png b/detail_png/Shaft_00866_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e390e002693a26fdd0a2c5463f05013bf2912daf --- /dev/null +++ b/detail_png/Shaft_00866_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f46dce19ac2e89d67730b9f555b573ef0380b46dd4a3ae7045550ba738f182ae +size 36701 diff --git a/detail_png/Shaft_00868_diam.png b/detail_png/Shaft_00868_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fad45c0ffacb2bcc572832c1b267e02b0ac5463f --- /dev/null +++ b/detail_png/Shaft_00868_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:170d858e1116184477349b07649059796ad3349b92d224d5addf01045b055632 +size 30078 diff --git a/detail_png/Shaft_00868_length.png b/detail_png/Shaft_00868_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eeade93b4ef7d1fc8df8397d0b295f096a1c76e5 --- /dev/null +++ b/detail_png/Shaft_00868_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cae46af82843bbd93c2f15815734c5bb0d6551959356d8cf1897a7026acff53 +size 32733 diff --git a/detail_png/Shaft_00868_title.png b/detail_png/Shaft_00868_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8866b4e504520d7601c6b4802d99867969415fdb --- /dev/null +++ b/detail_png/Shaft_00868_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55c6cad20cf2794494b157781ed6e244e0f6538aadde4c5cdb2e129fbf05c428 +size 30738 diff --git a/detail_png/Shaft_00872_diam.png b/detail_png/Shaft_00872_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3afc44427c2b9ec0fd3c17815a8e02f0aaf1184a --- /dev/null +++ b/detail_png/Shaft_00872_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1854085878af36da9453ffbd59a68be315a0b68d9c0868f556eca87eff7823f +size 20117 diff --git a/detail_png/Shaft_00872_length.png b/detail_png/Shaft_00872_length.png new file mode 100644 index 0000000000000000000000000000000000000000..50ea9b816d26af8ce83c2ad10dd6e3a6d5742a6a --- /dev/null +++ b/detail_png/Shaft_00872_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7029c3f7eb07b0b703c028f9c22b87b0988763178575ec60ef13b454cc893f5 +size 27677 diff --git a/detail_png/Shaft_00872_title.png b/detail_png/Shaft_00872_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1c8f9b832fc6b9c779eb110631a004d5eb897cb5 --- /dev/null +++ b/detail_png/Shaft_00872_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09e88044a60fb0f16ec3899b6061331f7680bb3e92ab7440d574c63499883f1c +size 35842 diff --git a/detail_png/Shaft_00873_diam.png b/detail_png/Shaft_00873_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d36b66a05df06c62a55582729993668f22a142e3 --- /dev/null +++ b/detail_png/Shaft_00873_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:324a5d913f11452e4bb8f814ca1423a1ce2180debe71078152239b078370fab5 +size 19383 diff --git a/detail_png/Shaft_00873_length.png b/detail_png/Shaft_00873_length.png new file mode 100644 index 0000000000000000000000000000000000000000..92e5c08e9568bef4e9781e3f9987d558b7f98ec9 --- /dev/null +++ b/detail_png/Shaft_00873_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b08c4efbde3bc17e049c9fcfa941a3c0337eedc6243ee19174fa84fe952a378d +size 19671 diff --git a/detail_png/Shaft_00873_title.png b/detail_png/Shaft_00873_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1e9742d15a82a1325b30315b5bbe846e741d0a71 --- /dev/null +++ b/detail_png/Shaft_00873_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bcb8008e04e139cc5ffdb04345eca3574960b0a1f78930ae47e9ea49f375c80 +size 35698 diff --git a/detail_png/Shaft_00876_diam.png b/detail_png/Shaft_00876_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aff3c0f30d7347b85379c40d88c0598aa345c092 --- /dev/null +++ b/detail_png/Shaft_00876_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a770c01a40d5d8c12fa49c18509647b49129bdd3b0934f2d43381cf7dde71b40 +size 20450 diff --git a/detail_png/Shaft_00876_length.png b/detail_png/Shaft_00876_length.png new file mode 100644 index 0000000000000000000000000000000000000000..763d13ebf224e622e5bb9640c6a6ce9701743e72 --- /dev/null +++ b/detail_png/Shaft_00876_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd059a78964f29272390b39ec33017b8f48a3977c982fb67228cfe5ec89745e6 +size 13364 diff --git a/detail_png/Shaft_00876_title.png b/detail_png/Shaft_00876_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e18dfa8f4a90e22417fedc9dfaf62f26d4a55e91 --- /dev/null +++ b/detail_png/Shaft_00876_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60f568e2f59c05c4b1224424d280b897300f5d53afb1eaa38667f05e07d91df1 +size 16414 diff --git a/detail_png/Shaft_00878_diam.png b/detail_png/Shaft_00878_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..43985ef39378d69d336e7462f4dac690bfeb6177 --- /dev/null +++ b/detail_png/Shaft_00878_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c2c00dfc15a98d8bd9f8203aa3ebd5205da1bbe2ec6116b55496e3b6dc491ff +size 18630 diff --git a/detail_png/Shaft_00878_length.png b/detail_png/Shaft_00878_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b55cd9df013b69798e16d07c50bdc99b31511f42 --- /dev/null +++ b/detail_png/Shaft_00878_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cf8492d4e05174011be8ef551a5dd9d80f0e35ec2334357517e3c3da4a6e4e2 +size 16852 diff --git a/detail_png/Shaft_00878_title.png b/detail_png/Shaft_00878_title.png new file mode 100644 index 0000000000000000000000000000000000000000..90475a56d792eebc8b5e4df5919efe6686365e42 --- /dev/null +++ b/detail_png/Shaft_00878_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f4ce1e8834c3f81490d35e67edb0a690e3fd87691d5eed3a4914e1a717dbfff +size 23510 diff --git a/detail_png/Shaft_00880_diam.png b/detail_png/Shaft_00880_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f904e00fc101ae318810ae3f16c95e21e7ee3b9f --- /dev/null +++ b/detail_png/Shaft_00880_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a03c61099cd80e835c750324e1c2b8e13c4ce9c30853d200bea503ef3bfb58c +size 37273 diff --git a/detail_png/Shaft_00880_length.png b/detail_png/Shaft_00880_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ec61bb666f200b1c89d709b8eafdc36c9f9291c5 --- /dev/null +++ b/detail_png/Shaft_00880_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3103d548c6a94746e1def835c0ea8e436ea092965b616c419c212fab3b50a7e4 +size 52484 diff --git a/detail_png/Shaft_00880_title.png b/detail_png/Shaft_00880_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f3a228367b722824719ec83495dc9a8ddfd3c1fb --- /dev/null +++ b/detail_png/Shaft_00880_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c07bbbf1391b8da98046230e0e2399c4aac96b01bce60b3d95a2df70495604bc +size 34337 diff --git a/detail_png/Shaft_00881_diam.png b/detail_png/Shaft_00881_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..93dbe06b4b2c5efd01562882f5f675f76048bc36 --- /dev/null +++ b/detail_png/Shaft_00881_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3209470c47a083a6be5ab93ea51ea9a33913d8f44bc79458fce6541b0522382a +size 19673 diff --git a/detail_png/Shaft_00881_length.png b/detail_png/Shaft_00881_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c4fb644f9256d01efb79fb2198312ee325c1ecda --- /dev/null +++ b/detail_png/Shaft_00881_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc371d82ae1222b7b26e931868b60ee5f7728f86995dca0aa896a9505025ece3 +size 15182 diff --git a/detail_png/Shaft_00881_title.png b/detail_png/Shaft_00881_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6defdda56f015589b6c89f860639ed8b326997ff --- /dev/null +++ b/detail_png/Shaft_00881_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c89da31a075ddb9871617166c2872fa738e91e48cad4f79d5fd4811f085942db +size 16607 diff --git a/detail_png/Shaft_00882_diam.png b/detail_png/Shaft_00882_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eee8fcb5a404307d6f686ad38901c05b35d1d384 --- /dev/null +++ b/detail_png/Shaft_00882_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e35d8970586cc07bc3d0bcd79240942ad9a7e3e74a949edd64943b7c712342cb +size 27138 diff --git a/detail_png/Shaft_00882_length.png b/detail_png/Shaft_00882_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c747a093061c6e4ad1dd0630779f5a022180e85 --- /dev/null +++ b/detail_png/Shaft_00882_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ad714f2a10423eb4e938fffa5ea4fd246e3a89d88e9bbb634aea4c2faf2bf19 +size 24501 diff --git a/detail_png/Shaft_00882_title.png b/detail_png/Shaft_00882_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bf55e8cae730b75aaf289be4e33b33e4def23562 --- /dev/null +++ b/detail_png/Shaft_00882_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc2901c896086cb1701a80cbcb52ac0f2deb06545db9711082ce28218ddb74d6 +size 27474 diff --git a/detail_png/Shaft_00886_diam.png b/detail_png/Shaft_00886_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5fa21b1e978320564ef28176a6e987348c9c82a8 --- /dev/null +++ b/detail_png/Shaft_00886_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79da80d3693a02bc046af509f563776263829b236bac1343f38d322dcfc6ff6a +size 24220 diff --git a/detail_png/Shaft_00886_length.png b/detail_png/Shaft_00886_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6dc3b7eb32bc411aa580e75c45ede3415fd0069e --- /dev/null +++ b/detail_png/Shaft_00886_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e562a1d45fadca0cbf816118af28bd7d015aa29ed492473e897411788d492e2e +size 35753 diff --git a/detail_png/Shaft_00886_title.png b/detail_png/Shaft_00886_title.png new file mode 100644 index 0000000000000000000000000000000000000000..327462086a2dd311c417408ed17782661bf5dd30 --- /dev/null +++ b/detail_png/Shaft_00886_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2b6d2deec5ba8eab4826207cd03025e136deafdf0af092872dba4b52a7b6739 +size 37422 diff --git a/detail_png/Shaft_00892_diam.png b/detail_png/Shaft_00892_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2e38ef98a0897a590b65eee6766bbf2bfa4b3ac0 --- /dev/null +++ b/detail_png/Shaft_00892_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19bf0cc8383910b1ce37fa46bd383e9cb31c6976a6e2e83657cc6150cafc4b3e +size 20105 diff --git a/detail_png/Shaft_00892_length.png b/detail_png/Shaft_00892_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a2d1e3d54ce6fc52da82ab4e79bbc9a44b09f41e --- /dev/null +++ b/detail_png/Shaft_00892_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79eb4a76b66ab9fd02d59491a56cc63df1a09f57cb181b7d1a6f119d6ab51ce1 +size 15623 diff --git a/detail_png/Shaft_00892_title.png b/detail_png/Shaft_00892_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ee098582f41b1b3ba34a0ca04d3c67d1fd5ee672 --- /dev/null +++ b/detail_png/Shaft_00892_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e60efac71524b9d67c2f8139ddb974c88171c9a774823709f66b75f1b86d8c5 +size 13439 diff --git a/detail_png/Shaft_00894_diam.png b/detail_png/Shaft_00894_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da0c784aa9175110caba7ad8e174a44763090c1d --- /dev/null +++ b/detail_png/Shaft_00894_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de692993216810c468927405e33c66b2a16d6973ae59a2d6bde6dad618a70d83 +size 19454 diff --git a/detail_png/Shaft_00894_length.png b/detail_png/Shaft_00894_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fbba647311fbd2a4612686b116e4d13309ef138a --- /dev/null +++ b/detail_png/Shaft_00894_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80507bbe253ac7fc8c8afdd5725d0085a6fc0ffe2d09b8bbe1deda5863adf384 +size 14420 diff --git a/detail_png/Shaft_00894_title.png b/detail_png/Shaft_00894_title.png new file mode 100644 index 0000000000000000000000000000000000000000..81e47e7e527ddd12fd382b47939f8d4bbaad2da0 --- /dev/null +++ b/detail_png/Shaft_00894_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17d9e45f6c47ee0ae4b2b8ce80ab77be20e3006c11cb0fbafc8b6d01a67489b2 +size 26160 diff --git a/detail_png/Shaft_00897_diam.png b/detail_png/Shaft_00897_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97539981eff5f10394a29fd0edc2bb4f803a9f09 --- /dev/null +++ b/detail_png/Shaft_00897_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7866d06dc37c75bc8899439494cdb6b1a50160ff59383e4a0e5b245d3ec50198 +size 18724 diff --git a/detail_png/Shaft_00897_length.png b/detail_png/Shaft_00897_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4a95e07ca9fa4ac178bdffc5443edafc17157f81 --- /dev/null +++ b/detail_png/Shaft_00897_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:169cfd3d1fe35a0375cccad8150730b4730d1bb94b53e8ddf34afefe971b7c1f +size 13636 diff --git a/detail_png/Shaft_00897_title.png b/detail_png/Shaft_00897_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c88f343850b299ad869e587bff64043141a90193 --- /dev/null +++ b/detail_png/Shaft_00897_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17a4b9af10c4c5d90e3ff02db01cb3ff21be19c41b54fa439f7cef0ee9fbc54e +size 18403 diff --git a/detail_png/Shaft_00901_diam.png b/detail_png/Shaft_00901_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0e4cdc27ce22de36685bdde94f5066d1f163a8a6 --- /dev/null +++ b/detail_png/Shaft_00901_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e44d6f9e638acd5f7ceefa66af224ae452fc53d3266ba57250c083d3db5d21c9 +size 25572 diff --git a/detail_png/Shaft_00901_length.png b/detail_png/Shaft_00901_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4abcd681b3484497cfc17b5d334f1c0789099a3c --- /dev/null +++ b/detail_png/Shaft_00901_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:202991ed0ba7efd27843a316d9c743e44a629273d1ce32180547ab7a72fe9794 +size 29894 diff --git a/detail_png/Shaft_00901_title.png b/detail_png/Shaft_00901_title.png new file mode 100644 index 0000000000000000000000000000000000000000..095df48c18b86421d25cc54f071e7b6d859a7ff9 --- /dev/null +++ b/detail_png/Shaft_00901_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf35d8c77739959ce836c0e2ebaa0e0ee694c8d1a82efcd460ce5ab5e91e9f71 +size 29869 diff --git a/detail_png/Shaft_00904_diam.png b/detail_png/Shaft_00904_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1fa68478d08d2279e14ec3f95c76b91c0c0c9164 --- /dev/null +++ b/detail_png/Shaft_00904_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4af9fed27d5f155d502d3db8d3d596acc360a3675e9638520ada5d93eb1d675a +size 25404 diff --git a/detail_png/Shaft_00904_length.png b/detail_png/Shaft_00904_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0b2c17e11d897286b7c08176d47660113fb80fb5 --- /dev/null +++ b/detail_png/Shaft_00904_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:877840fa45409ba67c21eedea3c318a9e7279752560e73a1e74a48c3e5452130 +size 26397 diff --git a/detail_png/Shaft_00904_title.png b/detail_png/Shaft_00904_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fef66aefed8809f4a5e1fcdecc851f3d88dfeaa4 --- /dev/null +++ b/detail_png/Shaft_00904_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53562460cb19ab9184c968216d1f007188a208ac3458bc0fb4f6111d143e1571 +size 30081 diff --git a/detail_png/Shaft_00908_diam.png b/detail_png/Shaft_00908_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e59359523994db548693190f494edef5c2427a6d --- /dev/null +++ b/detail_png/Shaft_00908_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74b9364f7c620d24b4a37a3b009801955c9bfdd921f430456ce01656b7563014 +size 25558 diff --git a/detail_png/Shaft_00908_length.png b/detail_png/Shaft_00908_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5f105d0441db8e37a4b11c77b01cd9535a430243 --- /dev/null +++ b/detail_png/Shaft_00908_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17fb7a34b5b5e4375966995c56de04053402503d0da158f3732b4a7f5e305799 +size 34627 diff --git a/detail_png/Shaft_00908_title.png b/detail_png/Shaft_00908_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9abef095788ffd4d5a19a5d48efbbd8f951c752d --- /dev/null +++ b/detail_png/Shaft_00908_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af4a2f4696c679b1b6c9e98a85d438789dad04100c9b609e11a52ee08e3e0e7f +size 31262 diff --git a/detail_png/Shaft_00912_diam.png b/detail_png/Shaft_00912_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fa116e5e9f724c4be87521e98f24c29744c1dbfe --- /dev/null +++ b/detail_png/Shaft_00912_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7df2e9505b2e9c8b2ef7d6d73bc779fc4d2a0763a91ea4c60f95f2533ac0325b +size 19439 diff --git a/detail_png/Shaft_00912_length.png b/detail_png/Shaft_00912_length.png new file mode 100644 index 0000000000000000000000000000000000000000..628f4aa90d5a30f4f788de2a625a43e9bb3c1d0b --- /dev/null +++ b/detail_png/Shaft_00912_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbae26dcc2598cb86dea8ead2605e5ebb7d8b28c30f12a126e11fa3fddbfd13e +size 14775 diff --git a/detail_png/Shaft_00912_title.png b/detail_png/Shaft_00912_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8eb9da720d612d5628734dbfff7a17d09cb93cc2 --- /dev/null +++ b/detail_png/Shaft_00912_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61ffae050afc91e85989a07e5ce19f7c6633abc83e52e420c94d8eac89c30983 +size 15174 diff --git a/detail_png/Shaft_00929_diam.png b/detail_png/Shaft_00929_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..40c66736f3f19443831e4bbc90086bd87bff91f5 --- /dev/null +++ b/detail_png/Shaft_00929_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0251781d73bb2b2cb95fdfc8015b03a1a66e747dfbaa2867a07cf0c0b93b53b7 +size 31659 diff --git a/detail_png/Shaft_00929_length.png b/detail_png/Shaft_00929_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6df33b36b1159ead9e0ba1bb5f34f6cbc22fd5dc --- /dev/null +++ b/detail_png/Shaft_00929_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b5991743eeb2f13714b80ddc3264b7d5c9e79cf3c4ec39d5e4330d8b8820ed6 +size 26974 diff --git a/detail_png/Shaft_00929_title.png b/detail_png/Shaft_00929_title.png new file mode 100644 index 0000000000000000000000000000000000000000..89de43dc4c6d247769ee278deb65931f43eca451 --- /dev/null +++ b/detail_png/Shaft_00929_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2952b47b5d6938a9808b7d6cb31249881174e2a4e773d1d2853958a7d74e392e +size 27133 diff --git a/detail_png/Shaft_00930_diam.png b/detail_png/Shaft_00930_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dfbc86446faf617b53b5d073869bee342ea4e959 --- /dev/null +++ b/detail_png/Shaft_00930_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8d1209fd4083bbb12e3401af038bdebda43f9f7a94b84e5cc08ccee30b1a571 +size 28544 diff --git a/detail_png/Shaft_00930_length.png b/detail_png/Shaft_00930_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5cf9fe09e93539a923f90745c6e99b079c49b851 --- /dev/null +++ b/detail_png/Shaft_00930_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:300e46f9df2871e45521eae734e443bd8666216337b0a6c062637a57c1a72e23 +size 28056 diff --git a/detail_png/Shaft_00930_title.png b/detail_png/Shaft_00930_title.png new file mode 100644 index 0000000000000000000000000000000000000000..848550fec84b9ae0da701a4d7290a994e73c4062 --- /dev/null +++ b/detail_png/Shaft_00930_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a449d12f7a00ad1c5b4685a3ef7a25bc81ade0e06fa3982f8086144d994198f1 +size 29950 diff --git a/detail_png/Shaft_00932_diam.png b/detail_png/Shaft_00932_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d1d98348554f763299258a8d4f0127783461c980 --- /dev/null +++ b/detail_png/Shaft_00932_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6290713aae5ef3a9967a3ce6a2fbe07aa05ef29f74e3e4af9e100b6aa1daccd8 +size 24444 diff --git a/detail_png/Shaft_00932_length.png b/detail_png/Shaft_00932_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d38f98cd5f7388104c819857840955f57e36fa5 --- /dev/null +++ b/detail_png/Shaft_00932_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31c698170251ba2891e1e2fa25fff84dd92bbd90364d9978f5da806c5601d40e +size 23373 diff --git a/detail_png/Shaft_00932_title.png b/detail_png/Shaft_00932_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d74ea2d6f0acfae29dd35ee71c42c78eea514a3f --- /dev/null +++ b/detail_png/Shaft_00932_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd0a62f077f79dfe6bb59777ee04c9ebbe14da50b75540baffd9920422476227 +size 32891 diff --git a/detail_png/Shaft_00933_diam.png b/detail_png/Shaft_00933_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9d2c170177156d9bd03ae2a52e14ef909ba23810 --- /dev/null +++ b/detail_png/Shaft_00933_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2acfc9b14a00de9c8a006861b460043cdd2d3a8d5896c69e7ac7e9feec30438 +size 19829 diff --git a/detail_png/Shaft_00933_length.png b/detail_png/Shaft_00933_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eb092b5e338d126750984ac9494a0be97bf691ac --- /dev/null +++ b/detail_png/Shaft_00933_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35ab14b15a8cb6140a5e5fea874d2b166cf4e44e8679a114d47727fccf2c5b27 +size 18290 diff --git a/detail_png/Shaft_00933_title.png b/detail_png/Shaft_00933_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3d35c66ee2b7e0617cf5cc0d41b94ac2cc0d5a03 --- /dev/null +++ b/detail_png/Shaft_00933_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bb9eb2b47171d143128e1187db537686e65a64815afcc6294591186d677de3d +size 27041 diff --git a/detail_png/Shaft_00939_diam.png b/detail_png/Shaft_00939_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5f535ce8ed585c488463d06628a40f0da333dded --- /dev/null +++ b/detail_png/Shaft_00939_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba49535ce0ce8cd3108d7276e8f6c1249eeb8a8d390d1ba82870900430552997 +size 19742 diff --git a/detail_png/Shaft_00939_length.png b/detail_png/Shaft_00939_length.png new file mode 100644 index 0000000000000000000000000000000000000000..67c7cc843af4a9bcfb3dd0915db8ef0ac156ad6f --- /dev/null +++ b/detail_png/Shaft_00939_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2383476d65a4c73f1de41c76684499119ad6550d2daab949af771af34bd86916 +size 24080 diff --git a/detail_png/Shaft_00939_title.png b/detail_png/Shaft_00939_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c07c09aee245e8294cf74dfb3c7507a6510eb745 --- /dev/null +++ b/detail_png/Shaft_00939_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12aa51f740af72f490d8999ba53e335cebd1bc52cfe01a7afddab655735aa58f +size 33536 diff --git a/detail_png/Shaft_00945_diam.png b/detail_png/Shaft_00945_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a38ba42d625498893eebfe7505816ad619cde47a --- /dev/null +++ b/detail_png/Shaft_00945_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ef493f4617c4fa785c92f6121be0190d1a3f14f38ebb2c0bfefe6c42e664d8e +size 28517 diff --git a/detail_png/Shaft_00945_length.png b/detail_png/Shaft_00945_length.png new file mode 100644 index 0000000000000000000000000000000000000000..37fd321a11e7a66ed3cb793172f69cc65418a3a5 --- /dev/null +++ b/detail_png/Shaft_00945_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:433bb1eb0e0b7fa05ff8a809dab0c06d255fed63a7edf502a553954e42f81120 +size 25047 diff --git a/detail_png/Shaft_00945_title.png b/detail_png/Shaft_00945_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ed0b36b10a493e1bf96808f8b3a052ec8965ce03 --- /dev/null +++ b/detail_png/Shaft_00945_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64fd133cbb647db28aa904715dcdea3a4996b682c0e31d04098dee74a22b8538 +size 21444 diff --git a/detail_png/Shaft_00947_diam.png b/detail_png/Shaft_00947_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aee19679432f7131fc3f666091f70bcb9b1c2bd3 --- /dev/null +++ b/detail_png/Shaft_00947_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cb36de49517ab71c82a20387832141720c079950db9d0d2fea7c876d8d192f1 +size 24659 diff --git a/detail_png/Shaft_00947_length.png b/detail_png/Shaft_00947_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4a88b99f55af6e2e1f3c1dc0e7e514772613cc46 --- /dev/null +++ b/detail_png/Shaft_00947_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aec91561ad22c6702997ff825fd6adf47eeda6e29d9b02da215e603ae907b939 +size 23763 diff --git a/detail_png/Shaft_00947_title.png b/detail_png/Shaft_00947_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a604312e35655f4340f3f4a07f2b5d7190225780 --- /dev/null +++ b/detail_png/Shaft_00947_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:593629de887a0ef316533471440e752cf6517c59bc633a2187c7604e335707f4 +size 31804 diff --git a/detail_png/Shaft_00956_diam.png b/detail_png/Shaft_00956_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8ff4d063ef940038e2e3cc23a0379e3b6983ce4b --- /dev/null +++ b/detail_png/Shaft_00956_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02967f5fef15bbf2150311e979d54fe63db5cf9f67126ab5e31b58925f2e9cbf +size 40983 diff --git a/detail_png/Shaft_00956_length.png b/detail_png/Shaft_00956_length.png new file mode 100644 index 0000000000000000000000000000000000000000..81075d4f7beba80e16c0fada91284ebdefc3c7ef --- /dev/null +++ b/detail_png/Shaft_00956_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b5018b177286e46b2d4ebb772fca25adfcb043715069e0ec9aa410a9391ba5d +size 58722 diff --git a/detail_png/Shaft_00956_title.png b/detail_png/Shaft_00956_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8eae61ce5c939a82931b7f2fd82504575f8cac4b --- /dev/null +++ b/detail_png/Shaft_00956_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5976e49fb2147572fe41f379f8e0e39b9bbd6f34fd2243df00682f398ec8e917 +size 33911 diff --git a/detail_png/Shaft_00964_diam.png b/detail_png/Shaft_00964_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8eac4139fa0dfef8e0772b5e944ff81ffa03c9d2 --- /dev/null +++ b/detail_png/Shaft_00964_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66b434385b95f2a65d380b8b12ff39a6427d9174b4ef88c625ba101d5285bef2 +size 19300 diff --git a/detail_png/Shaft_00964_length.png b/detail_png/Shaft_00964_length.png new file mode 100644 index 0000000000000000000000000000000000000000..52aa8230cfcdc2a738a4c96060219a73846a1773 --- /dev/null +++ b/detail_png/Shaft_00964_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3063cb05a886122103f60e3118aa7b48429388729579e7144991622b49f797a2 +size 14897 diff --git a/detail_png/Shaft_00964_title.png b/detail_png/Shaft_00964_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7e265ba751e4e95ee7400359f39090cdb2416eeb --- /dev/null +++ b/detail_png/Shaft_00964_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7e5e73fa21d657776af042caf692fb7e7c31b00d6b981e68828802a55b41d36 +size 18837 diff --git a/detail_png/Shaft_00965_diam.png b/detail_png/Shaft_00965_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48fac7ed050075cba74670e6d53c6959d07e6b98 --- /dev/null +++ b/detail_png/Shaft_00965_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d8c384bddf604b2d2f201b16b8a324a527a3bfbb2b042393c54299f892d95b3 +size 20339 diff --git a/detail_png/Shaft_00965_length.png b/detail_png/Shaft_00965_length.png new file mode 100644 index 0000000000000000000000000000000000000000..47aaf6630516a31d64f935336f51e1e28ba8e9e8 --- /dev/null +++ b/detail_png/Shaft_00965_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6264eec8574e07419b59e6398f7f0c55a67b29676780d981d982163b2b5878ef +size 15989 diff --git a/detail_png/Shaft_00965_title.png b/detail_png/Shaft_00965_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b92fff028aa891dcf43f8d6d217da592df2f56c0 --- /dev/null +++ b/detail_png/Shaft_00965_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58331ddc40b9464ea89dfde570af3ec8f7eda4c1d297c0d85ea4ad6269262013 +size 17849 diff --git a/detail_png/Shaft_00966_diam.png b/detail_png/Shaft_00966_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..68ddb4a703933bb04c8aea12d440dfbfc25813d9 --- /dev/null +++ b/detail_png/Shaft_00966_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67dc7bdafb5f592be1c5734b473d82d23ab46aea0ab69b9e392f7595d1347a90 +size 20684 diff --git a/detail_png/Shaft_00966_length.png b/detail_png/Shaft_00966_length.png new file mode 100644 index 0000000000000000000000000000000000000000..053e35ce24dc8cf811557a7eb48df43bc910506f --- /dev/null +++ b/detail_png/Shaft_00966_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9949c5a472446e0b9db5b2dcdfb77d957e1e92679ba4feadd8908872e77f2b35 +size 16043 diff --git a/detail_png/Shaft_00966_title.png b/detail_png/Shaft_00966_title.png new file mode 100644 index 0000000000000000000000000000000000000000..195bdfe76c9c1eca205a5c2c77e6396090b460ce --- /dev/null +++ b/detail_png/Shaft_00966_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4974cd289d2f2a760543e7c4abea0907a5d12b2bdfdfced20dfc10d00f5f11da +size 15359 diff --git a/detail_png/Shaft_00970_diam.png b/detail_png/Shaft_00970_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..187d720e87db871edbcbba848474e38401696f19 --- /dev/null +++ b/detail_png/Shaft_00970_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e07da7de5abff69134b233f216fbcbee95401892e6a7b8ffbc4eca743127d262 +size 26137 diff --git a/detail_png/Shaft_00970_length.png b/detail_png/Shaft_00970_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc58559d1009990e0604d960e123c69c98f4dc4e --- /dev/null +++ b/detail_png/Shaft_00970_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb00003dd28dccdf043cc57a16ac47bd85a4e213e30cc63dd10c344e27742dc5 +size 35110 diff --git a/detail_png/Shaft_00970_title.png b/detail_png/Shaft_00970_title.png new file mode 100644 index 0000000000000000000000000000000000000000..04d7de01a3a9856c1eb41eeb488a43c726a06762 --- /dev/null +++ b/detail_png/Shaft_00970_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:417e34c45aa12016932f9cd8efd097a4a0936651910048f73402debbe5360a90 +size 29654 diff --git a/detail_png/Shaft_00971_diam.png b/detail_png/Shaft_00971_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d3826c7a6bcf4899349aa013c580c57b7ec27a71 --- /dev/null +++ b/detail_png/Shaft_00971_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:958e1f55209ff933c8f53cef1e303cfb24036a04a18b6360b826b68c1c977264 +size 24958 diff --git a/detail_png/Shaft_00971_length.png b/detail_png/Shaft_00971_length.png new file mode 100644 index 0000000000000000000000000000000000000000..616907257d6d9b0630039c0d0e25ac8265b48fd5 --- /dev/null +++ b/detail_png/Shaft_00971_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:acb1bb7182c34bd0091ffc0f3f08074e072762a1f6e74c58a9d2ff406485ed60 +size 27379 diff --git a/detail_png/Shaft_00971_title.png b/detail_png/Shaft_00971_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42c916182f338f2666882ce3e2f4fc72161e1d1d --- /dev/null +++ b/detail_png/Shaft_00971_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c08a8fcdf0903de8447ac7033fbf0114c2a5c0110b6ca012924c495f576d27ab +size 31343 diff --git a/detail_png/Shaft_00976_diam.png b/detail_png/Shaft_00976_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..08f2bd10f774c9751a49321dc3aa86f9c0065bd3 --- /dev/null +++ b/detail_png/Shaft_00976_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2411b5f6ab157bf0c7cc0db385e992ab72489e6c32973c190a7350a68f1bebdb +size 26346 diff --git a/detail_png/Shaft_00976_length.png b/detail_png/Shaft_00976_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f450b28aec105a5e8770e7b9f7dc9b9329894912 --- /dev/null +++ b/detail_png/Shaft_00976_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d3eee053814f169cc4818ef2d6e068db0f59441ef064abe3a77ae2bd13a54c4 +size 29589 diff --git a/detail_png/Shaft_00976_title.png b/detail_png/Shaft_00976_title.png new file mode 100644 index 0000000000000000000000000000000000000000..75841a062c289962d93a1d613a6d809adc963db6 --- /dev/null +++ b/detail_png/Shaft_00976_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:565a5ab0deec00f572d214291b6d71022d5b61e2f95e76d90167d17e51136eb2 +size 32899 diff --git a/detail_png/Shaft_00980_diam.png b/detail_png/Shaft_00980_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..304e0d57a82dcabb82a1321f272b6aee1822fd58 --- /dev/null +++ b/detail_png/Shaft_00980_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3d412d9f0ae354494344a045984e64b8f196c84abe09d145410020f1063116f +size 24693 diff --git a/detail_png/Shaft_00980_length.png b/detail_png/Shaft_00980_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ad47ba7cd4580d7cb4ffdc243625684da3f8b241 --- /dev/null +++ b/detail_png/Shaft_00980_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:841cbf4d44dd15a13f36c77cc06bf21a726b58eefa86f6cb2acfbfd02f388bbe +size 20517 diff --git a/detail_png/Shaft_00980_title.png b/detail_png/Shaft_00980_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ad96fe758eb52ee2de6b6d928d456cbd6d0020d8 --- /dev/null +++ b/detail_png/Shaft_00980_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71d81e811180e65cd476ccf1e11fa7b47b78d13e5477cb03dd8d6a3d5188f60f +size 26005 diff --git a/detail_png/Shaft_00982_diam.png b/detail_png/Shaft_00982_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f1d1dd3e91e62de1d467a83bf06d5f5cb61b76a1 --- /dev/null +++ b/detail_png/Shaft_00982_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:727801e2be0a6b8d17d856941fca10454756da8252e91502be0790680020c508 +size 33372 diff --git a/detail_png/Shaft_00982_length.png b/detail_png/Shaft_00982_length.png new file mode 100644 index 0000000000000000000000000000000000000000..135c35b9e44715ce04776b38115680226ba5f032 --- /dev/null +++ b/detail_png/Shaft_00982_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e626e9c1558a17630d95336c68eb1dc43e978fef2abd7f46533b83763b40864 +size 44569 diff --git a/detail_png/Shaft_00982_title.png b/detail_png/Shaft_00982_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e3de9c3884fa22bf75da447a954b3f43b14070f9 --- /dev/null +++ b/detail_png/Shaft_00982_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6862c155b691405b5c14b5f8fbe20566f90d81c6e6295a9e48e160b2121e782 +size 30741 diff --git a/detail_png/Shaft_00989_diam.png b/detail_png/Shaft_00989_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94008b2fe1a4858a9695805f43e3ad81449335ca --- /dev/null +++ b/detail_png/Shaft_00989_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70a4c28ad0a02bd2e6102f25ae799bae818d60b0a8b69a29af1bd33f51ba98cd +size 28256 diff --git a/detail_png/Shaft_00989_length.png b/detail_png/Shaft_00989_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a1d6d49422d00b33621b71326bdd4c001173c59 --- /dev/null +++ b/detail_png/Shaft_00989_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fce70019d6bf6e023313521bc0c13bcaeaf4fc6a1c7acc0176426bac4524bb9f +size 20280 diff --git a/detail_png/Shaft_00989_title.png b/detail_png/Shaft_00989_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1789903af5706a635430ac8a429febab4f98e674 --- /dev/null +++ b/detail_png/Shaft_00989_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:102ed5b082d600fc22538b31f26c5b6d0c46e827f113f4dcb9014959c939dadf +size 18925 diff --git a/detail_png/Shaft_00991_diam.png b/detail_png/Shaft_00991_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..968668625157771b113c7b8f810a7f9dbdb29f18 --- /dev/null +++ b/detail_png/Shaft_00991_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:514014695421e12e921001de568d5703b1fb5c3f962821b48b929973ee39b295 +size 30828 diff --git a/detail_png/Shaft_00991_length.png b/detail_png/Shaft_00991_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a4be83cbbb126adf09ea0e09a33f82106d72ceed --- /dev/null +++ b/detail_png/Shaft_00991_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f013f09217e8bbbab6f10453d8267de5f51fd382374d389e82cad57724256405 +size 24022 diff --git a/detail_png/Shaft_00991_title.png b/detail_png/Shaft_00991_title.png new file mode 100644 index 0000000000000000000000000000000000000000..05841ccdc81c1664dfa29e3ffd48d628d4fb8d6e --- /dev/null +++ b/detail_png/Shaft_00991_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23842e036af61a2d018b2c963905b0c56212550595d51234c8a06cb9475ecc45 +size 29966 diff --git a/detail_png/Shaft_00995_diam.png b/detail_png/Shaft_00995_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fe7ecc985652c6f3a1284f4c050e2d0b6fbc897e --- /dev/null +++ b/detail_png/Shaft_00995_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e6052e6554f4d47512158002dd0cdb8b04d9ac447f2dee29945e8f887570a28 +size 25765 diff --git a/detail_png/Shaft_00995_length.png b/detail_png/Shaft_00995_length.png new file mode 100644 index 0000000000000000000000000000000000000000..329365283c84acdab8ca0a0a01a994f88bc97375 --- /dev/null +++ b/detail_png/Shaft_00995_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1f4530743085f5fca5ccc53f1cab72a577557982d2314a34ad58ce9a294458f +size 22350 diff --git a/detail_png/Shaft_00995_title.png b/detail_png/Shaft_00995_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9f2ca37c9cb85f470209d8ab23db6f6ff0a73146 --- /dev/null +++ b/detail_png/Shaft_00995_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fa588b825253127f9466204a5748354257081dc650bd71cbd382581ae7f0b68 +size 24313 diff --git a/detail_png/Shaft_01000_diam.png b/detail_png/Shaft_01000_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2b36cebc4bf70e50039049c3d0db4b1d7a46b373 --- /dev/null +++ b/detail_png/Shaft_01000_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9c2a9d5425f52e6117b6fb8a4300da88b78d9ba8b2f71c804463407890e8e4e +size 32477 diff --git a/detail_png/Shaft_01000_length.png b/detail_png/Shaft_01000_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f8183a34ea1d2b31591e9f125a938f4f0f8bf68e --- /dev/null +++ b/detail_png/Shaft_01000_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4453a2ca7445221e7153bd7d802b88d50e33153353c392c37de115dedecf24ce +size 44560 diff --git a/detail_png/Shaft_01000_title.png b/detail_png/Shaft_01000_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e970391aea09f98790fcde0f419ff8dcfb1cbb7e --- /dev/null +++ b/detail_png/Shaft_01000_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f2ac87bad38ec1b5d9791f31f3a7f1b260fdea499464b41b01d4ad1b3b65a4d +size 30475 diff --git a/detail_png/Shaft_01006_diam.png b/detail_png/Shaft_01006_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..075a51f07792df1be3c795c0296e67f9af187d6e --- /dev/null +++ b/detail_png/Shaft_01006_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64d2461136046559a535a7e5f7f8de9c7d1785be9c8968067f5e93e1672410f1 +size 23004 diff --git a/detail_png/Shaft_01006_length.png b/detail_png/Shaft_01006_length.png new file mode 100644 index 0000000000000000000000000000000000000000..be7268ddc8d320e22866c2dc6510de86e414db72 --- /dev/null +++ b/detail_png/Shaft_01006_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24cffd88ffa38d01c70d0f635daeacab8a9387f21ab2add82561ca2879ae46bf +size 20515 diff --git a/detail_png/Shaft_01006_title.png b/detail_png/Shaft_01006_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cb3757d79c6ad29c4d64c5d08a2f8a86da8180a6 --- /dev/null +++ b/detail_png/Shaft_01006_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05012131e8224286dda2d1fae3e181738c1bc178516f8746229030083b69fd86 +size 27523 diff --git a/detail_png/Shaft_01007_diam.png b/detail_png/Shaft_01007_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7539a8d373480acdbc6d5c2e6d2c0c49172e17be --- /dev/null +++ b/detail_png/Shaft_01007_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed3d2f2549bc05c7ce06db68d0560c9a067c5bea4c1e1b947c1cca065732e38a +size 19506 diff --git a/detail_png/Shaft_01007_length.png b/detail_png/Shaft_01007_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2e79ad0b99704fdfc4e39ba89cac735af956e650 --- /dev/null +++ b/detail_png/Shaft_01007_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3b79b1e7062adc1d4c98732986796974e8c29f3eafa73893e76a60d9c01b2ac +size 17841 diff --git a/detail_png/Shaft_01007_title.png b/detail_png/Shaft_01007_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e5894ff02f6c98df146869e4f316372bf284c11a --- /dev/null +++ b/detail_png/Shaft_01007_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35ed6cc78064ae7714216a29c4cea615a84f90780f906b30552f844cd2728d9e +size 28178 diff --git a/detail_png/Shaft_01013_diam.png b/detail_png/Shaft_01013_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0e5fb842f9ff7862c5ce3e88700e8c9c301bd12c --- /dev/null +++ b/detail_png/Shaft_01013_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54377755f2f5b0b104ca7db73bd0db96e31fefcffa746f221817ed24a1eb23db +size 27651 diff --git a/detail_png/Shaft_01013_length.png b/detail_png/Shaft_01013_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e07ecfc1b72db936f4c46f68306c12b0890cc144 --- /dev/null +++ b/detail_png/Shaft_01013_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:349af1367c03b5cedcdce428912a25e33ff465fceb048398f2d48ddac18912c6 +size 36800 diff --git a/detail_png/Shaft_01013_title.png b/detail_png/Shaft_01013_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aae791cf1a7f55396aca3225615324ef274b42e2 --- /dev/null +++ b/detail_png/Shaft_01013_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:691539a67de13e73fc93dff1e374398aed6396d9d45f9d18570e762bb38bbed7 +size 34733 diff --git a/detail_png/Shaft_01015_diam.png b/detail_png/Shaft_01015_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8ae61b9d100bd225a4ec7c4d3ad12eb43b44687f --- /dev/null +++ b/detail_png/Shaft_01015_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd39f9332055dfb71ca30c26d5d7621a01a2970b8dda1c95d8b645b928e12b83 +size 19594 diff --git a/detail_png/Shaft_01015_length.png b/detail_png/Shaft_01015_length.png new file mode 100644 index 0000000000000000000000000000000000000000..79b05850bdfcb47b5f2ce539ef27632e922e748b --- /dev/null +++ b/detail_png/Shaft_01015_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dcde1c6bf25d2b818b305b8d11276d016c6ce94e8d78c761e245c61aa50962f +size 18319 diff --git a/detail_png/Shaft_01015_title.png b/detail_png/Shaft_01015_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1e93e95f166a079afe7d75ee6fe35e020417bdd3 --- /dev/null +++ b/detail_png/Shaft_01015_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ea1366c498e1b0742974eec6491e44a32b3c5640d5f8d132bbef4d1088fcfce +size 26850 diff --git a/detail_png/Shaft_01016_diam.png b/detail_png/Shaft_01016_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..869a432e9e42d5f2d9f030437c1938253a254ee3 --- /dev/null +++ b/detail_png/Shaft_01016_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b2e8444fab0aa407ec63cf325fd78bacc60e89fe7e9224889d645a153af775e +size 35870 diff --git a/detail_png/Shaft_01016_length.png b/detail_png/Shaft_01016_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0558a15b82baf0bccb8bb206f53c751bf580860b --- /dev/null +++ b/detail_png/Shaft_01016_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b9bf92e93136c34720369335f94018c2a77f117aa27f531f6e3637f2b47368f +size 32229 diff --git a/detail_png/Shaft_01016_title.png b/detail_png/Shaft_01016_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f71b45f1258e1151defe6ed660bac2f7c9adcd49 --- /dev/null +++ b/detail_png/Shaft_01016_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:251c862c966dc0de82f2a3f0a1e71309c2c0fde06d3370810d4fd6f5c81f4c65 +size 31136 diff --git a/detail_png/Shaft_01018_diam.png b/detail_png/Shaft_01018_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a2b7f75879654ce6bb623bde0f09c19b975f93f3 --- /dev/null +++ b/detail_png/Shaft_01018_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc79fdc6aee4632415f6eea4d92fadd338fe71b9c68e9160be28c41995ff5da5 +size 26885 diff --git a/detail_png/Shaft_01018_length.png b/detail_png/Shaft_01018_length.png new file mode 100644 index 0000000000000000000000000000000000000000..aa4ce62fc1c6ec8a403adf835398022573146f8b --- /dev/null +++ b/detail_png/Shaft_01018_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ef5e6c96b1ca87fa1034659eee0ca075ae54a13c917f16d363f13e272a5608d +size 35970 diff --git a/detail_png/Shaft_01018_title.png b/detail_png/Shaft_01018_title.png new file mode 100644 index 0000000000000000000000000000000000000000..520d94f1530b12d2c26570648853809430388d5e --- /dev/null +++ b/detail_png/Shaft_01018_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2262577dd2a6dff2332bb05e1aae3956d772b2ddfedb107c88cfd31ca94d420b +size 32390 diff --git a/detail_png/Shaft_01020_diam.png b/detail_png/Shaft_01020_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d4ab64e02b771e54b685566bf7a57ea18d5094a2 --- /dev/null +++ b/detail_png/Shaft_01020_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbf233edbf8d618a75d90ee40d23af6ce36c1594f63b4ef429fdd6b0bb5e8f66 +size 31055 diff --git a/detail_png/Shaft_01020_length.png b/detail_png/Shaft_01020_length.png new file mode 100644 index 0000000000000000000000000000000000000000..257e1531d3ec5a4453877ee2378cd4b29a15b5f7 --- /dev/null +++ b/detail_png/Shaft_01020_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:949b5f14fb1346a94e49800f1b64f8a779a7d8026cc8000a98f2084d0f4600d4 +size 27256 diff --git a/detail_png/Shaft_01020_title.png b/detail_png/Shaft_01020_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fc29c2bb87020c12fcba510e11263eb2b4fde225 --- /dev/null +++ b/detail_png/Shaft_01020_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3eaf032db2304f28f41a2a30a3bb7a91370b6793e1590c54b9ceae8e247cff69 +size 30352 diff --git a/detail_png/Shaft_01021_diam.png b/detail_png/Shaft_01021_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..008a64f7ce2693436f5e9731310c6246d125e18d --- /dev/null +++ b/detail_png/Shaft_01021_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcfd3f632aac14a2b629423d63c7ddec31862832ff85134fa438a2acec89b8a7 +size 25216 diff --git a/detail_png/Shaft_01021_length.png b/detail_png/Shaft_01021_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13174c3d4c9d5f4543c59db6429f0953096dd4a6 --- /dev/null +++ b/detail_png/Shaft_01021_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee51d06ca1db84ecae1a415ae5a87c39975539c946eec47e72e1f7f9b1b2a87b +size 28660 diff --git a/detail_png/Shaft_01021_title.png b/detail_png/Shaft_01021_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c781ade6118beb3bd92299c659e88bbd4b8ad9b --- /dev/null +++ b/detail_png/Shaft_01021_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87c9c9ee6ba425c5da68a33ed008790c7ea9090cf13b89b98caa7c9c11e1cde2 +size 30758 diff --git a/detail_png/Shaft_01024_diam.png b/detail_png/Shaft_01024_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..91c2f30e545628ec23b3e492c6c69e4eb5b39bd3 --- /dev/null +++ b/detail_png/Shaft_01024_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa0033543bcdc597bc2327493beaafad89bd6af6ef753446bad41b96ef8b6516 +size 28752 diff --git a/detail_png/Shaft_01024_length.png b/detail_png/Shaft_01024_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1bcedf6f6d12299351716fa535ab91d603c778d9 --- /dev/null +++ b/detail_png/Shaft_01024_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44c0f19e19e4b835ca5ab3c5a7ee7895567deaeb6332eccb3348b68eb4d13793 +size 41342 diff --git a/detail_png/Shaft_01024_title.png b/detail_png/Shaft_01024_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9a55924c179f6914e44935dc039e40875f6ea6a7 --- /dev/null +++ b/detail_png/Shaft_01024_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac1f38f5d06906208b6264dd144c71ba706e32dfc46f6d78d3dda7461c35e27a +size 35495 diff --git a/detail_png/Shaft_01026_diam.png b/detail_png/Shaft_01026_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0cdda5955731f91a8d021897d6ab3d250eb61185 --- /dev/null +++ b/detail_png/Shaft_01026_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:615ef49ff2093eaf8de6ec9bf79f3c357c4fffd8080979f0469ec068f36ceae3 +size 19908 diff --git a/detail_png/Shaft_01026_length.png b/detail_png/Shaft_01026_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c140c5d1f2a748c660a50fa4e18f8bc178b81169 --- /dev/null +++ b/detail_png/Shaft_01026_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:950546b5ece2d9ceea259fe8633d841cdb3ed756a2f96d3fdf1a18315b28fe44 +size 19468 diff --git a/detail_png/Shaft_01026_title.png b/detail_png/Shaft_01026_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c85dbf5dfc3addf51a69d1251c0e5686f1d38eb3 --- /dev/null +++ b/detail_png/Shaft_01026_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:128bad03a227339297b3a0b13e683e04fea01e5d3432dc828062034b4d888421 +size 20967 diff --git a/detail_png/Shaft_01028_diam.png b/detail_png/Shaft_01028_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a720df8bb39d096901486786cfe476fa5b9236bc --- /dev/null +++ b/detail_png/Shaft_01028_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06fac4ef51c15c2047316db0ea0319635ed7ac98161f9450761c5533c12a1822 +size 36050 diff --git a/detail_png/Shaft_01028_length.png b/detail_png/Shaft_01028_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ab7a0f7339246f9dad079dc6e4ce2d96fdc9454b --- /dev/null +++ b/detail_png/Shaft_01028_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1bfc1f2709c36f8a5718bc63fa03bffe0e378d4a4a60b5c9e44f6b380da3e1e +size 39043 diff --git a/detail_png/Shaft_01028_title.png b/detail_png/Shaft_01028_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c475127e14dd89a91327da5b9c46fbb7eb6e93fb --- /dev/null +++ b/detail_png/Shaft_01028_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e17aa590746884c8d66ed0177d42ce4a8c861ce2bb716eb53d1a90cca6042791 +size 28920 diff --git a/detail_png/Shaft_01029_diam.png b/detail_png/Shaft_01029_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5c885d43797b91c334839017e092cc6a712891b2 --- /dev/null +++ b/detail_png/Shaft_01029_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37468535a9ac0e9ca1f4211e85bb50ae9b08a55b7c957a6b4dd6f1ac4a8eea0e +size 20507 diff --git a/detail_png/Shaft_01029_length.png b/detail_png/Shaft_01029_length.png new file mode 100644 index 0000000000000000000000000000000000000000..038e646fb6da06fee4a818ca415ed18700faa5a2 --- /dev/null +++ b/detail_png/Shaft_01029_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91dce7909a2380af60b653cef103e90fb56c83c2b0445d5769eb06b5c56ddec5 +size 19674 diff --git a/detail_png/Shaft_01029_title.png b/detail_png/Shaft_01029_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b406fb6d3cd2070424e22ed4bbf77082bfddd43b --- /dev/null +++ b/detail_png/Shaft_01029_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce02c22266f518569f7a686ec314e902926f6ab93a041932e77990d82c70582f +size 27793 diff --git a/detail_png/Shaft_01030_diam.png b/detail_png/Shaft_01030_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9aaae8e3d5d76af881216c2b8c3afee8f62f8f9e --- /dev/null +++ b/detail_png/Shaft_01030_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43b87c1f4580d986c568173404125c42a7c401e64a1f47a49d3c82e2a0ffbc6d +size 20566 diff --git a/detail_png/Shaft_01030_length.png b/detail_png/Shaft_01030_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2c5b55831768ee345374558aaebbdd02fc71a8b6 --- /dev/null +++ b/detail_png/Shaft_01030_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bbc767d43bda5b413da546b7ad201e2efb532d7c246595407e3aa67f5174f99 +size 20703 diff --git a/detail_png/Shaft_01030_title.png b/detail_png/Shaft_01030_title.png new file mode 100644 index 0000000000000000000000000000000000000000..23847872fab8d37db9d3ac1cdf8d27565040ddd7 --- /dev/null +++ b/detail_png/Shaft_01030_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4f986b624e737ce41e0fe1b57db5c75adaf471a3ff96fb32ac1c07fe3e34fb5 +size 27603 diff --git a/detail_png/Shaft_01031_diam.png b/detail_png/Shaft_01031_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9fc4419e446ae4a1d204363b461158feee2ff1a3 --- /dev/null +++ b/detail_png/Shaft_01031_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03d00d3048d70069cbb500071ea59e3b2c926739bdfb0b3c739242d82560c009 +size 28071 diff --git a/detail_png/Shaft_01031_length.png b/detail_png/Shaft_01031_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0950f896d00055a81785232e807abea4d94f8d79 --- /dev/null +++ b/detail_png/Shaft_01031_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:327b388022176a48056be74453dd019f062495fb34c998d465ddde8f9fc93e29 +size 25983 diff --git a/detail_png/Shaft_01031_title.png b/detail_png/Shaft_01031_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8dc83655fbe431df2c875e42c2c3dd9f89fbe056 --- /dev/null +++ b/detail_png/Shaft_01031_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0ce19a9905d1565082bc6ab9c3eef5a69ca8296c110ac827de4f90d5ec4ab20 +size 28720 diff --git a/detail_png/Shaft_01033_diam.png b/detail_png/Shaft_01033_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..29ac8cc55fdf66ea77b11032bf40e9619fe16960 --- /dev/null +++ b/detail_png/Shaft_01033_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3a59755a7ffe11a5e11a6f75a8e9114b846820f70402b9963b43ef9e3363b7d +size 35010 diff --git a/detail_png/Shaft_01033_length.png b/detail_png/Shaft_01033_length.png new file mode 100644 index 0000000000000000000000000000000000000000..44e034a7e9acbe2c0d22b0076af15fa0913ff70b --- /dev/null +++ b/detail_png/Shaft_01033_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:059930444917b8edea275808129026b6a6a08d0d66d880b9b2a7ea57e4305e4e +size 51261 diff --git a/detail_png/Shaft_01033_title.png b/detail_png/Shaft_01033_title.png new file mode 100644 index 0000000000000000000000000000000000000000..645886ccfc276aa3b249acc25c8fe5298cf5cccd --- /dev/null +++ b/detail_png/Shaft_01033_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:561aeff4c40b913baba89c8b66d9187f172f02023e0cc6504818a01f0eeb2520 +size 33360 diff --git a/detail_png/Shaft_01034_diam.png b/detail_png/Shaft_01034_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9822c899290e274b12584b6b4755d9af1e987075 --- /dev/null +++ b/detail_png/Shaft_01034_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abe93d6ec74dc92161fbd87ec1bd340eb282956e908a49488fdb850951d3f384 +size 25254 diff --git a/detail_png/Shaft_01034_length.png b/detail_png/Shaft_01034_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5bff9af88ef6b52c119ed5814cc8c6e7aca70cbb --- /dev/null +++ b/detail_png/Shaft_01034_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1f01a590b9a7a818a622e58f50e0dea7e03dd155a90ed27df2520a468963d0c +size 30731 diff --git a/detail_png/Shaft_01034_title.png b/detail_png/Shaft_01034_title.png new file mode 100644 index 0000000000000000000000000000000000000000..26cc3f4f9256a65f3b294d332699ba8124af86cf --- /dev/null +++ b/detail_png/Shaft_01034_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9c76e2fae2dbd5db96e870956a9238a4eb424d4f6c2c0787c0f26f6ba3c8939 +size 28528 diff --git a/detail_png/Shaft_01036_diam.png b/detail_png/Shaft_01036_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b84d495bf934cd0d12052b4c4ea86df3f530a31c --- /dev/null +++ b/detail_png/Shaft_01036_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:478f2821ab4d03dc1a8fdfe65f09b9c30f2859518ede9fbeac7667c7d2cad0d9 +size 19234 diff --git a/detail_png/Shaft_01036_length.png b/detail_png/Shaft_01036_length.png new file mode 100644 index 0000000000000000000000000000000000000000..91d2849683016f56634bf60f83d597c7028f8462 --- /dev/null +++ b/detail_png/Shaft_01036_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8922cb476b37450f31953ba151d1bf707087485fe86d48e38279b652bb279c0 +size 25983 diff --git a/detail_png/Shaft_01036_title.png b/detail_png/Shaft_01036_title.png new file mode 100644 index 0000000000000000000000000000000000000000..634305da853336eabeefcb248b2d04a59ddd2307 --- /dev/null +++ b/detail_png/Shaft_01036_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fad51deea9997b354b9285fd2f18c23152dddeeb7a785c0b268ac7677535502 +size 30273 diff --git a/detail_png/Shaft_01038_diam.png b/detail_png/Shaft_01038_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..998d18ddc6e24b33632cf4a2e285f67ce1e1a453 --- /dev/null +++ b/detail_png/Shaft_01038_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbd33ed616e579c3887054167dfe229f834b445062ce379961622ab41267e404 +size 25160 diff --git a/detail_png/Shaft_01038_length.png b/detail_png/Shaft_01038_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8525baf425794b7a03042ce9ebbd0956716792af --- /dev/null +++ b/detail_png/Shaft_01038_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:500921012c3797b9896bd9bf112205add1f14a60331f4a441984f142688dd052 +size 36060 diff --git a/detail_png/Shaft_01038_title.png b/detail_png/Shaft_01038_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c15c99efff35ea2030fc8215de38eaf5b9a4aa3e --- /dev/null +++ b/detail_png/Shaft_01038_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f24922c812095e75f18fc855ac9511bc0757b5c3f17bd4c4ac5adb4abf6c13a +size 30300 diff --git a/detail_png/Shaft_01039_diam.png b/detail_png/Shaft_01039_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2604dda01797d7d25148c2e0d7c1e4f7313e680b --- /dev/null +++ b/detail_png/Shaft_01039_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72ca28503c8c2c841401b7613c0cd3eabc2a908c06d54536c799cb1be6b9f78e +size 25900 diff --git a/detail_png/Shaft_01039_length.png b/detail_png/Shaft_01039_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0bbe38087068b9ed2bd37de7df9be82c19542833 --- /dev/null +++ b/detail_png/Shaft_01039_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdd1392aaa9459ef0d125a2182ee1f532843b820f641220d6620fc26930e3348 +size 29756 diff --git a/detail_png/Shaft_01039_title.png b/detail_png/Shaft_01039_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e3ae73fd77cf95ea969b9345f3b67c4c48802b23 --- /dev/null +++ b/detail_png/Shaft_01039_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4210c97a4e3964d3ecfdefa4842010e40f1bdc0cc3a80edfd662109770f86ede +size 32476 diff --git a/detail_png/Shaft_01046_diam.png b/detail_png/Shaft_01046_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a4b6f3c61c83cda6587ef82bd6f9b8c0b80dc462 --- /dev/null +++ b/detail_png/Shaft_01046_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7cc4fd731512e3f412512c806e10f42d4fba50fe38254d2e684b5c6376450dc +size 26380 diff --git a/detail_png/Shaft_01046_length.png b/detail_png/Shaft_01046_length.png new file mode 100644 index 0000000000000000000000000000000000000000..49d4336fb8da4bc8742c9dded62d0a168edd2b06 --- /dev/null +++ b/detail_png/Shaft_01046_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:537ca4f232929897cb32b66f167912067bac5b3fc2088a1fa47899c5b4383ae0 +size 35363 diff --git a/detail_png/Shaft_01046_title.png b/detail_png/Shaft_01046_title.png new file mode 100644 index 0000000000000000000000000000000000000000..346dd774291ff23b1c9451d86972b052976caa97 --- /dev/null +++ b/detail_png/Shaft_01046_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae620f1001174f9466266f69997b01f40844af17821aff97764a233ba16bd0f4 +size 32361 diff --git a/detail_png/Shaft_01049_diam.png b/detail_png/Shaft_01049_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..069e096209c2befa492438873cd68e55b446c52b --- /dev/null +++ b/detail_png/Shaft_01049_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:773acbad3d346f05f66c4eb21f6fb2ae6b7d81662ffa2bbb01e39a778533b077 +size 25568 diff --git a/detail_png/Shaft_01049_length.png b/detail_png/Shaft_01049_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7a42d8aa108af004b99f4c87fec6df7f2565e7ff --- /dev/null +++ b/detail_png/Shaft_01049_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c13cfb79c0d5bba7e4219d1dec357635f5b77e2a257cc1f5109ee95d22ebfc3c +size 23194 diff --git a/detail_png/Shaft_01049_title.png b/detail_png/Shaft_01049_title.png new file mode 100644 index 0000000000000000000000000000000000000000..98d416b9a3823e3016c2495e8abb5a88a31c1d75 --- /dev/null +++ b/detail_png/Shaft_01049_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f93c4f85eb008474c0f9c54d235ab64a3f30cddbb4b0d5bc00e3e97743e97ea +size 29966 diff --git a/detail_png/Shaft_01055_diam.png b/detail_png/Shaft_01055_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6868ee135b25cfa9401a4b6078b23053ece7d7fa --- /dev/null +++ b/detail_png/Shaft_01055_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f2d0036619ec5a515ba0cb74c39b11b22b8ac0eec9bf5bae8e289791124731f +size 35831 diff --git a/detail_png/Shaft_01055_length.png b/detail_png/Shaft_01055_length.png new file mode 100644 index 0000000000000000000000000000000000000000..044ce4270a937f2c088826ecdc622580c629e3fe --- /dev/null +++ b/detail_png/Shaft_01055_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c334d6b3e9c692ae789f65fd902db79aa163c91c8a78552b808ef89acf36f887 +size 47532 diff --git a/detail_png/Shaft_01055_title.png b/detail_png/Shaft_01055_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a62da246c051267a3529f670335b3f71378e003b --- /dev/null +++ b/detail_png/Shaft_01055_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff7e963d92bd7effca152e91a097fe1f01de58ce83b77abc6fc81aa6a6f80170 +size 31932 diff --git a/detail_png/Shaft_01061_diam.png b/detail_png/Shaft_01061_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7378085fe7d230adbba85cb3a3453bf3fa5f9141 --- /dev/null +++ b/detail_png/Shaft_01061_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6eff510172cddf0a645e2e98292d475742c83de0698cbe038958b5600f48344 +size 30085 diff --git a/detail_png/Shaft_01061_length.png b/detail_png/Shaft_01061_length.png new file mode 100644 index 0000000000000000000000000000000000000000..46171defe4509071d04edcaf1f066cdb643f1ff2 --- /dev/null +++ b/detail_png/Shaft_01061_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0934320f7857a0532ecb4841723e6f5c4fb5c44683fbc0b59649cb3e50ba1a88 +size 27577 diff --git a/detail_png/Shaft_01061_title.png b/detail_png/Shaft_01061_title.png new file mode 100644 index 0000000000000000000000000000000000000000..613cbb204e82ecca66249ba47bbe4613bdf4b290 --- /dev/null +++ b/detail_png/Shaft_01061_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ae533415fa548e8654896e0bfe248cde0416a5c2bd60ec28e0c6f440d27a597 +size 24826 diff --git a/detail_png/Shaft_01062_diam.png b/detail_png/Shaft_01062_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..96ebdcf9bf51f320014ffda831d18565dd8c7b14 --- /dev/null +++ b/detail_png/Shaft_01062_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ed833b463f9c2bf9f3e3f2c11fe3455cb7095d9cb1ac38aefd106a14c79401f +size 35359 diff --git a/detail_png/Shaft_01062_length.png b/detail_png/Shaft_01062_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ff1429d032a63528f71b675b11781cbee54a8903 --- /dev/null +++ b/detail_png/Shaft_01062_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:523facb90f89b4e676fe637dda069c0c429ed9e636a099aa12bf46eb6beaefa4 +size 42008 diff --git a/detail_png/Shaft_01062_title.png b/detail_png/Shaft_01062_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ea76f6f89dfc9519a9c7029c77239bc98d1eea47 --- /dev/null +++ b/detail_png/Shaft_01062_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a31b08e1751099a4b064a5b174f3affc3936e858f75c626a4c62c2dc9abd9f30 +size 32415 diff --git a/detail_png/Shaft_01064_diam.png b/detail_png/Shaft_01064_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4fc462d16f4ca599eebe405de7e0038d5c36a9c4 --- /dev/null +++ b/detail_png/Shaft_01064_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5e42f3492942b7faf3505cd961250ac7ab32d4d76dcf7bdc8d3cff20d8479b8 +size 25256 diff --git a/detail_png/Shaft_01064_length.png b/detail_png/Shaft_01064_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4c46a08818fc33b0ffb858ca7014a6f1f5cce84e --- /dev/null +++ b/detail_png/Shaft_01064_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c3e052c69fcf6959c07fb0eb71c656c2bfa3d519bb6b8ba292925353c662b38 +size 29610 diff --git a/detail_png/Shaft_01064_title.png b/detail_png/Shaft_01064_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6e320c21fe2df5ce86c8969ac31574c182266ee9 --- /dev/null +++ b/detail_png/Shaft_01064_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b48be723eece8ced2d2ec9d859246e23e0f4d6520335c169ce121dedeeac8c26 +size 29106 diff --git a/detail_png/Shaft_01065_diam.png b/detail_png/Shaft_01065_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..472d49f5797ac5b63f192a3c6f4d9e6f4d15f57c --- /dev/null +++ b/detail_png/Shaft_01065_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b9149437061871ecd75703e141a8fb64bffd1b03283fef2262b130e646f5829 +size 24964 diff --git a/detail_png/Shaft_01065_length.png b/detail_png/Shaft_01065_length.png new file mode 100644 index 0000000000000000000000000000000000000000..64130531cb8410acef87b1d6058ca34da796825a --- /dev/null +++ b/detail_png/Shaft_01065_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c76f4cad64c04d0d7e366aed00662a7eea085a64366859561a85ef560a754a79 +size 34230 diff --git a/detail_png/Shaft_01065_title.png b/detail_png/Shaft_01065_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a3a475a42eb421176c7bf76695b5cd92342dbdb4 --- /dev/null +++ b/detail_png/Shaft_01065_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2fb38e88c63bc66cc458936e8443f74b2fd5ecaef185c0c8b217fc9f655fe2e7 +size 32297 diff --git a/detail_png/Shaft_01073_diam.png b/detail_png/Shaft_01073_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4d0d08140405d98841ee323872dc0e98f46d5e31 --- /dev/null +++ b/detail_png/Shaft_01073_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f21c282ae7287ca3ed66c89111dc85da0c1510a8a607e102944cebe93184a480 +size 24491 diff --git a/detail_png/Shaft_01073_length.png b/detail_png/Shaft_01073_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e6c8559388bb06ea84b65be575470dfa903f9742 --- /dev/null +++ b/detail_png/Shaft_01073_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61019ecbd04bf290610c1d733f3f83f542886ef1fa857de206bbdb223022cbd1 +size 18341 diff --git a/detail_png/Shaft_01073_title.png b/detail_png/Shaft_01073_title.png new file mode 100644 index 0000000000000000000000000000000000000000..de23e5f94aab87dcb04a060f384d8b055172a8ff --- /dev/null +++ b/detail_png/Shaft_01073_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8f80195fd3402b41370fa8eac73e0b4e3510090e79966b24a62bde13698cd50 +size 18690 diff --git a/detail_png/Shaft_01079_diam.png b/detail_png/Shaft_01079_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..14c8e192b5f2fb7bea6b51018d7a16629403c564 --- /dev/null +++ b/detail_png/Shaft_01079_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3779278b2a180615242296dda5c7dd7c822fb7d5b0b75e9642565abf1154ca74 +size 38775 diff --git a/detail_png/Shaft_01079_length.png b/detail_png/Shaft_01079_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8a5e097f4c589cd17bc3fac6b7a46454b6f84452 --- /dev/null +++ b/detail_png/Shaft_01079_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:186eeb8564a8986563762a90307f10b6d4b00ab37d15d72c2a112b5364392ed3 +size 40289 diff --git a/detail_png/Shaft_01079_title.png b/detail_png/Shaft_01079_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1d287d99522d3cfda5f2f1bda6db73215697447c --- /dev/null +++ b/detail_png/Shaft_01079_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:104b0815c6212b72ec8b8457060daa4ff8051c00105c4dca7db45731b9a17f4b +size 31642 diff --git a/detail_png/Shaft_01081_diam.png b/detail_png/Shaft_01081_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c7978970934f11e509c3a796113928184151145a --- /dev/null +++ b/detail_png/Shaft_01081_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14f4d80e77d54c0c16339e31dae877e4d1ad131d1f58c7a087ee1452c6427388 +size 23888 diff --git a/detail_png/Shaft_01081_length.png b/detail_png/Shaft_01081_length.png new file mode 100644 index 0000000000000000000000000000000000000000..10232a81aaad7f4ee09a89ce627b977e35249d2f --- /dev/null +++ b/detail_png/Shaft_01081_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:349fc40c38957e100f3aff9472131ad57808783118f6a58cbb4d2eb5a2008695 +size 19347 diff --git a/detail_png/Shaft_01081_title.png b/detail_png/Shaft_01081_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a54620453c10eb5f97c5c2e4a3973d003049f28 --- /dev/null +++ b/detail_png/Shaft_01081_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab5146c24f214834f15808201b69fdf80b864f5b6df13cd645ab5b98497b161d +size 18810 diff --git a/detail_png/Shaft_01085_diam.png b/detail_png/Shaft_01085_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..74fad55eb4b5e6aeff5587cd49319975259a14a4 --- /dev/null +++ b/detail_png/Shaft_01085_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d9faba9b03e3844552d0ca998cc8c833bab9fafcf77ad4891f2e16f83dfe9ca +size 24119 diff --git a/detail_png/Shaft_01085_length.png b/detail_png/Shaft_01085_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2c43e631780a198de0f3ca846441947c253bfc3e --- /dev/null +++ b/detail_png/Shaft_01085_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74fce5b9fb5991d7adae481224fe5d43aaf60d88e844e0d8506734392c5e72c6 +size 20286 diff --git a/detail_png/Shaft_01085_title.png b/detail_png/Shaft_01085_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b7e4794d34e0987c039bfb47310459427d6d1088 --- /dev/null +++ b/detail_png/Shaft_01085_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aab4dfcbfed0e34b1251afd003fbf0f6b2a66dff8e723a0964a88bb84a74416f +size 20432 diff --git a/detail_png/Shaft_01089_diam.png b/detail_png/Shaft_01089_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e090f6a0df5d3f4918a805337286061b866bdef9 --- /dev/null +++ b/detail_png/Shaft_01089_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4976fe38e79348e38bbe63e125a971810f81cbde5bdc2d26c8b04fdb3cb5cb0 +size 30117 diff --git a/detail_png/Shaft_01089_length.png b/detail_png/Shaft_01089_length.png new file mode 100644 index 0000000000000000000000000000000000000000..04ce835a15889377be1b29249d97de895c8245ba --- /dev/null +++ b/detail_png/Shaft_01089_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f867e814389d56a1fd1d4289e9a2a767cc25eb659c72a79807bf657537ccb381 +size 41764 diff --git a/detail_png/Shaft_01089_title.png b/detail_png/Shaft_01089_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ac60e0497cb6efe8a27710a78b9226cfd1abd34 --- /dev/null +++ b/detail_png/Shaft_01089_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f403aab80d38ba3287cb9ccc337d2a9e5ea3c60a7c3ca9368fb4e2de71022d51 +size 30595 diff --git a/detail_png/Shaft_01091_diam.png b/detail_png/Shaft_01091_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b813b5a7a447281bada3f5bc80ca9c0fd81121a8 --- /dev/null +++ b/detail_png/Shaft_01091_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c66a8c0376b81953f99a0326198ba45ba99d2e4836d20ea271f3a9d4acc5799e +size 20997 diff --git a/detail_png/Shaft_01091_length.png b/detail_png/Shaft_01091_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f159308ea0b752815d20e15a2c595382e0f9924d --- /dev/null +++ b/detail_png/Shaft_01091_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ba10663704ca0256852cda73ba0d50ce6ba78cb576e88d464f32d0b30b7bce3 +size 28595 diff --git a/detail_png/Shaft_01091_title.png b/detail_png/Shaft_01091_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e37a278f46e5d8e91b4d04bc8fb4cc975dce5c76 --- /dev/null +++ b/detail_png/Shaft_01091_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5196fbcfa2dc1d61808fd524c0c179215da43625e07eec47136aab94df12d97c +size 31322 diff --git a/detail_png/Shaft_01093_diam.png b/detail_png/Shaft_01093_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f1408f9b151599a005c4497a397ea15cfdbf557c --- /dev/null +++ b/detail_png/Shaft_01093_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:030a7e2f8c280d15d29b6b735f60942bba4984c046059efa40119edfe14587e4 +size 19865 diff --git a/detail_png/Shaft_01093_length.png b/detail_png/Shaft_01093_length.png new file mode 100644 index 0000000000000000000000000000000000000000..708b8044c2432657190f0c205d8c102d120db582 --- /dev/null +++ b/detail_png/Shaft_01093_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26fdfeeaed03320d90f5ada64151bedc49b67dcc32cb7b871bbe692ccaaf75f9 +size 22456 diff --git a/detail_png/Shaft_01093_title.png b/detail_png/Shaft_01093_title.png new file mode 100644 index 0000000000000000000000000000000000000000..84e3a2c1a997ed613d9f12d724b5ecc3721a202e --- /dev/null +++ b/detail_png/Shaft_01093_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61a7fc862876c0d86e9a658d570751b566fced2e1ab0575f54b4f39f8b57fd8c +size 30192 diff --git a/detail_png/Shaft_01094_diam.png b/detail_png/Shaft_01094_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2633f9293766619de7a767c18a73d953178d5ea9 --- /dev/null +++ b/detail_png/Shaft_01094_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee42f55608acca741c4f72b9ce829ebda450b781318c5e672ebf093c6d5ba2b5 +size 31937 diff --git a/detail_png/Shaft_01094_length.png b/detail_png/Shaft_01094_length.png new file mode 100644 index 0000000000000000000000000000000000000000..827144e429c1502c568a0f1fb297d07af0d1d001 --- /dev/null +++ b/detail_png/Shaft_01094_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f22c39dd9eee4d0ad41bafb67d29944d783e6892c5d597d3e14c423337a7a2e5 +size 45998 diff --git a/detail_png/Shaft_01094_title.png b/detail_png/Shaft_01094_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4503b37976fd057a09ebbc8df2ecec2090ea2748 --- /dev/null +++ b/detail_png/Shaft_01094_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71566f3d12eb6a575ea7000fb3de5db1d79fe22edfa4636c75cd22498b4d5660 +size 30262 diff --git a/detail_png/Shaft_01101_diam.png b/detail_png/Shaft_01101_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..14749322ff8042ff7048ba1bf5016daae345005f --- /dev/null +++ b/detail_png/Shaft_01101_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be66dc01070dd6029a1536271918cebdb11d1986afe029e71bfad939d6059ece +size 25700 diff --git a/detail_png/Shaft_01101_length.png b/detail_png/Shaft_01101_length.png new file mode 100644 index 0000000000000000000000000000000000000000..058368592d1715f4be8207f06dcbf5d151f3a331 --- /dev/null +++ b/detail_png/Shaft_01101_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66d34409b58f7a182c360916dd10ddd66f2ba8b60a19a10984cf3bfe9ba44bda +size 22719 diff --git a/detail_png/Shaft_01101_title.png b/detail_png/Shaft_01101_title.png new file mode 100644 index 0000000000000000000000000000000000000000..312a9c1529b24da98d51ae0b0108e0b904cf8eb2 --- /dev/null +++ b/detail_png/Shaft_01101_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be21fe4f371a6f9c546bbdc7673b71d8d139abae878fc85c8b115aafbdf56bb1 +size 23960 diff --git a/detail_png/Shaft_01111_diam.png b/detail_png/Shaft_01111_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..38545e3b3b88bf19bffaeaef0990ede88d65a6cc --- /dev/null +++ b/detail_png/Shaft_01111_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee5fedb82ce971e47acdd0485d2a20a22bb7175ef2e942ff5fbe30398e529d98 +size 19333 diff --git a/detail_png/Shaft_01111_length.png b/detail_png/Shaft_01111_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e95b63288c4fec7ccb4794d956119dd88a10ffc5 --- /dev/null +++ b/detail_png/Shaft_01111_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e99c006f0e77ce3fff4166194a01aae226d050bbad2fedf9a3a22172b420bb3b +size 17845 diff --git a/detail_png/Shaft_01111_title.png b/detail_png/Shaft_01111_title.png new file mode 100644 index 0000000000000000000000000000000000000000..77116ea00111bcf189c5e0076ad059541607bb30 --- /dev/null +++ b/detail_png/Shaft_01111_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05e0edafa24eb9ed505e0c1fa9b1f4925d620ad859c4a805a111d906b513b3a3 +size 32205 diff --git a/detail_png/Shaft_01113_diam.png b/detail_png/Shaft_01113_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ceef0fd1d165160ea4463f4db279b247bc407025 --- /dev/null +++ b/detail_png/Shaft_01113_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e66597ae8ff965270945bc61286f676665d91aefe856091018f2a5ed6b1fffcd +size 19572 diff --git a/detail_png/Shaft_01113_length.png b/detail_png/Shaft_01113_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3310072feb64bf77738f1e80d8cf64d729430f4c --- /dev/null +++ b/detail_png/Shaft_01113_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95d0794df65e98ae660d9d8e1c90c32899f38ac420e32d4ebc766be120fb3f83 +size 14361 diff --git a/detail_png/Shaft_01113_title.png b/detail_png/Shaft_01113_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b2e6b22f25ae1076dad1770ad5b76263efb277bd --- /dev/null +++ b/detail_png/Shaft_01113_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:133d6b17952de20dc5eecf3de618d044adb8606c1bbbee59b2810105fb4c41c3 +size 18157 diff --git a/detail_png/Shaft_01114_diam.png b/detail_png/Shaft_01114_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..077161a9643034f1a5f29bff2f8b8a469dd286d5 --- /dev/null +++ b/detail_png/Shaft_01114_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:983af1015d9e2fde785f02a2dd4c57b4a8f3db57b08e104bb3b0d5ec2370f50c +size 40493 diff --git a/detail_png/Shaft_01114_length.png b/detail_png/Shaft_01114_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c3bd4641899abf611d274ed3660978622e4d5eb5 --- /dev/null +++ b/detail_png/Shaft_01114_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b5457a6d2f3c705192af5f1f2e5ae729a0dd235e8b869a30ab9045d256cdc65 +size 51770 diff --git a/detail_png/Shaft_01114_title.png b/detail_png/Shaft_01114_title.png new file mode 100644 index 0000000000000000000000000000000000000000..76c4859cb0dce8ac585bc37759276513576ad978 --- /dev/null +++ b/detail_png/Shaft_01114_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4cd8726040463cef16113ca133de31f484b9629757d56883d690f806b01965f +size 26651 diff --git a/detail_png/Shaft_01125_diam.png b/detail_png/Shaft_01125_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f054ff63a54cd85f988f25630a6c18a20adb6d96 --- /dev/null +++ b/detail_png/Shaft_01125_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01563b12821b8c51bb6619d8b142f3ecf998b96e0f07071635f78e49659904f5 +size 25325 diff --git a/detail_png/Shaft_01125_length.png b/detail_png/Shaft_01125_length.png new file mode 100644 index 0000000000000000000000000000000000000000..daccabe1eb1df03eb06e09a02f9c755abd2a2975 --- /dev/null +++ b/detail_png/Shaft_01125_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b0a93b161cd694f43f9595ab530a8cec8fedb071b1deb70b3d606120c06ad14 +size 29823 diff --git a/detail_png/Shaft_01125_title.png b/detail_png/Shaft_01125_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2b2effdf2188749c40e2956fd9281cad2593defc --- /dev/null +++ b/detail_png/Shaft_01125_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4457d898e8c5d2ee7186ab059081fdedbb278cd4a9411cd7a1e734ab9dfe129 +size 34303 diff --git a/detail_png/Shaft_01128_diam.png b/detail_png/Shaft_01128_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..314025a188ee48d63328bcc5672110d31aae10fe --- /dev/null +++ b/detail_png/Shaft_01128_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68cad0da89f3802a6944df28bf5036ed2a39713d9e69f888593735e2c59e4d3f +size 37497 diff --git a/detail_png/Shaft_01128_length.png b/detail_png/Shaft_01128_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a04c8680828f7ba3b3e22bfcd0c05d5365b1d54e --- /dev/null +++ b/detail_png/Shaft_01128_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b71e80c1e86227aae7ce057ab108bdeb0f41d4ee282d842e34d62ace32f24a36 +size 32837 diff --git a/detail_png/Shaft_01128_title.png b/detail_png/Shaft_01128_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a84f14fb77bb5fb78048372ce34effe01624e7a9 --- /dev/null +++ b/detail_png/Shaft_01128_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50da4336eb5d28088ed3b30b7331ae502e81b484d36520aad5b211cc53eaed4d +size 30945 diff --git a/detail_png/Shaft_01129_diam.png b/detail_png/Shaft_01129_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0c200d6580abf35d8bcb083e084b3456ab441698 --- /dev/null +++ b/detail_png/Shaft_01129_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b590f4e8c393e52800c43b8aaeaaf60efadeebcc3e6d342584d4dd43337523d8 +size 24793 diff --git a/detail_png/Shaft_01129_length.png b/detail_png/Shaft_01129_length.png new file mode 100644 index 0000000000000000000000000000000000000000..37811bba43d9687a78a7762a5e165b27ca0cb17b --- /dev/null +++ b/detail_png/Shaft_01129_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b2fba140c731775ea1d4c4049b35173e5f1cb46813ed948623f668cbc852538 +size 24366 diff --git a/detail_png/Shaft_01129_title.png b/detail_png/Shaft_01129_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1d3608d7e305a9ac843c5fc16c6ee5387f5b55a3 --- /dev/null +++ b/detail_png/Shaft_01129_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05c4c99ca8cdd8efe61fd099443f7deea31aefc327e951e30e354b5794baf424 +size 29486 diff --git a/detail_png/Shaft_01133_diam.png b/detail_png/Shaft_01133_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..31f21cc341401bb153f490d6914e7300f1fa06fd --- /dev/null +++ b/detail_png/Shaft_01133_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66b4c7c58d77e611172682e5b84c3eb21a79ab3cb239c2c075175ff3ed0d93e0 +size 24470 diff --git a/detail_png/Shaft_01133_length.png b/detail_png/Shaft_01133_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4905a8e0d212f313cf9824383e8263343c46e8b3 --- /dev/null +++ b/detail_png/Shaft_01133_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf2a78055af32ee42b7ff3bd8f321b289d1fab1cffe917c30cf39709750cd57d +size 23624 diff --git a/detail_png/Shaft_01133_title.png b/detail_png/Shaft_01133_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2f730fd216c7834bab4f10801ecad0e3457821cc --- /dev/null +++ b/detail_png/Shaft_01133_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bad4a4cd1cac814d1a612c97073bcb7bcc41556a37270bd6409c9c0a0ae7e1e +size 28565 diff --git a/detail_png/Shaft_01137_diam.png b/detail_png/Shaft_01137_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a75f7061ae7915b5c04fc8790d3d6daf715ed28 --- /dev/null +++ b/detail_png/Shaft_01137_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7f79ef77f745f916f2846b097fd7d1ffbae313a3836f22c4510fb7c35872b8a +size 25779 diff --git a/detail_png/Shaft_01137_length.png b/detail_png/Shaft_01137_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c96c9520b7994d84bc1148ed8c279233ab6575fa --- /dev/null +++ b/detail_png/Shaft_01137_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44dd45cbfc29a0684021ab6037d176414499146cabc9eaa44179d17db6ee3ec6 +size 36365 diff --git a/detail_png/Shaft_01137_title.png b/detail_png/Shaft_01137_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3c87c777a5f5e6d082b9400d72e59f87e9722d14 --- /dev/null +++ b/detail_png/Shaft_01137_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24f6fffa81676ca36498757617d92f02da5f40f422b7f94f949bdbd42b2062d8 +size 34247 diff --git a/detail_png/Shaft_01139_diam.png b/detail_png/Shaft_01139_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f9bb6bc6134ca8ccf90d6d6191215818909c32b6 --- /dev/null +++ b/detail_png/Shaft_01139_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce37dedeee8fddef9c0386384ddb19542e7595bd9dfd29e2857c7730cdf7bf08 +size 24427 diff --git a/detail_png/Shaft_01139_length.png b/detail_png/Shaft_01139_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77309c9b6bb62dbd31e90b336b21dd2362b35a2b --- /dev/null +++ b/detail_png/Shaft_01139_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c792d1912e625526a812491bee2d9d35081030b0e4befa2cbcd8f3c0808bac02 +size 20559 diff --git a/detail_png/Shaft_01139_title.png b/detail_png/Shaft_01139_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a3552b1d2153be295e8e630458917e79c386c4ca --- /dev/null +++ b/detail_png/Shaft_01139_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4dd287c9ebd926a157213bbf703caffd738f858d460ebe4ffa9c92580eb9f7d +size 16403 diff --git a/detail_png/Shaft_01141_diam.png b/detail_png/Shaft_01141_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..56e6d4fbdc252156f6c08cbca73fa4d71b4484cc --- /dev/null +++ b/detail_png/Shaft_01141_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9433e9180076a57dae0c5dd3076605c12dc4d0641894808de65b381cc817542a +size 26747 diff --git a/detail_png/Shaft_01141_length.png b/detail_png/Shaft_01141_length.png new file mode 100644 index 0000000000000000000000000000000000000000..381b9d5608d810b722ba0dbc1cdaac62a7af5c95 --- /dev/null +++ b/detail_png/Shaft_01141_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c52dda33cd7ebaff4e53f41b1804adf3eac342a9e3954bfefc548e56631b6e58 +size 22899 diff --git a/detail_png/Shaft_01141_title.png b/detail_png/Shaft_01141_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5d47f2748add3fa30a5ac0146bcd2314c020d79a --- /dev/null +++ b/detail_png/Shaft_01141_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a5fab3120e5cfcc3421b8644907636a2569f83eff690044fc38680e225eb993 +size 22216 diff --git a/detail_png/Shaft_01148_diam.png b/detail_png/Shaft_01148_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e68344da1c1bb4823a08dbafbe89af7a6b9a6d3a --- /dev/null +++ b/detail_png/Shaft_01148_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55a8d6775a03aca100d47e1ae255c82ee075051840aa70b5cd232ac8000060bd +size 24080 diff --git a/detail_png/Shaft_01148_length.png b/detail_png/Shaft_01148_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77e778cb04ba307a961559dd94a45f51f63781fa --- /dev/null +++ b/detail_png/Shaft_01148_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c371ef6d0246f67e8a835e2439675159eb5c48a40d7cde65b9999dcdd74577fb +size 23301 diff --git a/detail_png/Shaft_01148_title.png b/detail_png/Shaft_01148_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b751ffc237c57e9c8ee2b25ae4e3a63c1460c793 --- /dev/null +++ b/detail_png/Shaft_01148_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa8fa027cacb73f653a9e44bd987cf689635f8e2fa54a06ca27bcbac0ddfad72 +size 28982 diff --git a/detail_png/Shaft_01149_diam.png b/detail_png/Shaft_01149_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f2e0d6d6b115c3f319b85ecac48caab015512fbb --- /dev/null +++ b/detail_png/Shaft_01149_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d5ac58637b1b609863a1f6f649c92d39a5c38042e1ee6aca523adaac2ac93a1 +size 28723 diff --git a/detail_png/Shaft_01149_length.png b/detail_png/Shaft_01149_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c02085730fe98d6cb6abd9563f188cbea45063c8 --- /dev/null +++ b/detail_png/Shaft_01149_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7072e48e10154c6968002a609796424cf514af47827ef60e16264975c87e0055 +size 30044 diff --git a/detail_png/Shaft_01149_title.png b/detail_png/Shaft_01149_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ade2a23849f5a5f3f8f6b27dc85503090928cf80 --- /dev/null +++ b/detail_png/Shaft_01149_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03ddbd046de710e25cf1e6ebbb18dcdf81f8e14e98e402853a3fec47f41cee44 +size 27461 diff --git a/detail_png/Shaft_01150_diam.png b/detail_png/Shaft_01150_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c69fab74bd36341d87243d804bfc014040bf40b --- /dev/null +++ b/detail_png/Shaft_01150_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90f895cdb0aa9d1529349c63000205575198b595258f63523f8f1f8ea198b7ac +size 20457 diff --git a/detail_png/Shaft_01150_length.png b/detail_png/Shaft_01150_length.png new file mode 100644 index 0000000000000000000000000000000000000000..43bc7682dc7157ec4b53300d922d6266bc7241a0 --- /dev/null +++ b/detail_png/Shaft_01150_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:076a10442fed8b9407945a98bcf00495b353fd08285b9b62aaaa9aa3a9957b01 +size 27704 diff --git a/detail_png/Shaft_01150_title.png b/detail_png/Shaft_01150_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cdd8edc45a4175144d72f0c91736e5ab175a841a --- /dev/null +++ b/detail_png/Shaft_01150_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:421bbae6cb031914abb6db712c4230cef002400a75571d4672db27020b8ff92b +size 27874 diff --git a/detail_png/Shaft_01153_diam.png b/detail_png/Shaft_01153_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8338a54391cf2c6292a50bd85039b9f37bff2737 --- /dev/null +++ b/detail_png/Shaft_01153_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:484736b217662eaa9de25ef68bf5b8827501c2afb5e4ebc91241cc855466017d +size 25092 diff --git a/detail_png/Shaft_01153_length.png b/detail_png/Shaft_01153_length.png new file mode 100644 index 0000000000000000000000000000000000000000..577d32b0d8e6e9e9cd752e07de1e76c36b32a376 --- /dev/null +++ b/detail_png/Shaft_01153_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:712586ac46236d089dcd03a6f67a0f9d89aebfa8a293555e36b9324858e7ac24 +size 25820 diff --git a/detail_png/Shaft_01153_title.png b/detail_png/Shaft_01153_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51423bc45024cdfdd54a90951e67930de6d61a5a --- /dev/null +++ b/detail_png/Shaft_01153_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74dd97a809b1152a80e59a639ffba43048e7de952e71f8dffde5f5ea36181e93 +size 28449 diff --git a/detail_png/Shaft_01157_diam.png b/detail_png/Shaft_01157_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3d098937b92463924e3e9af57ca47cd6582efc80 --- /dev/null +++ b/detail_png/Shaft_01157_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd55b10e7f67d7707474757f6f28799b8e30863205886e172adee4c2b2697805 +size 25141 diff --git a/detail_png/Shaft_01157_length.png b/detail_png/Shaft_01157_length.png new file mode 100644 index 0000000000000000000000000000000000000000..91fce39e2eb9bd224d19f4791f8814b1ab1c467a --- /dev/null +++ b/detail_png/Shaft_01157_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9b1aa909a1fa035140156e854cb23acfccb4f6bf27297d9696f159920496d64 +size 21860 diff --git a/detail_png/Shaft_01157_title.png b/detail_png/Shaft_01157_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9847fd0da27be7bdf778f7288f096eacdeec82eb --- /dev/null +++ b/detail_png/Shaft_01157_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e9442fa4d6d73745d7ae83df0bc5aea0424fa825132a96fbb580283903d4486 +size 23492 diff --git a/detail_png/Shaft_01159_diam.png b/detail_png/Shaft_01159_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cb8aa35ce248c0907f957abe91d802de32d0ae4a --- /dev/null +++ b/detail_png/Shaft_01159_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec46e8494f69a21446a8aefe2178491de1499c32cffa5cb2900d2a8abcac6ba4 +size 33015 diff --git a/detail_png/Shaft_01159_length.png b/detail_png/Shaft_01159_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c5d1610c7c878d1f5043bf342402f58130c9b9ef --- /dev/null +++ b/detail_png/Shaft_01159_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35a1fb4d79e2efebca459884e992adc38657feb15799769147eea52769668b30 +size 47857 diff --git a/detail_png/Shaft_01159_title.png b/detail_png/Shaft_01159_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31bd7f1ed018efd6966ef37752395bd79ce6f465 --- /dev/null +++ b/detail_png/Shaft_01159_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3af586b83116ee1ba9b403637d2f40fce4ad90568721e73071b85386ed56d7d +size 28693 diff --git a/detail_png/Shaft_01161_diam.png b/detail_png/Shaft_01161_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ac2fac4e6bb9da2df806fc264de51f097e4234bb --- /dev/null +++ b/detail_png/Shaft_01161_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd8ee96daca7b0b0f3ac1d9de7f4060153d4d71568c100fe26704388a9e1b7fc +size 20244 diff --git a/detail_png/Shaft_01161_length.png b/detail_png/Shaft_01161_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ba734c61fdefeda899ab92b2802fc6d7dd7e9838 --- /dev/null +++ b/detail_png/Shaft_01161_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aed8b23aba90656ff323c43c2a3a9a49a45408c836a2437d2812b8232f5bb5e +size 23781 diff --git a/detail_png/Shaft_01161_title.png b/detail_png/Shaft_01161_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9d10cc8f6688e193cc32b4d6a9924d22fab4f94c --- /dev/null +++ b/detail_png/Shaft_01161_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fb7a1f0ccb240f0e211f7f64bc07ab541e0c1f49d224c64e3d264e363cb1f3d +size 30339 diff --git a/detail_png/Shaft_01165_diam.png b/detail_png/Shaft_01165_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..258954d96630c4404f34e96d43d8c28b1fd00e1b --- /dev/null +++ b/detail_png/Shaft_01165_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75544d055090a27304af5ae055014b30cfed32903c5a6c6ee0d3162c4af3d56f +size 19728 diff --git a/detail_png/Shaft_01165_length.png b/detail_png/Shaft_01165_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0de18724130e910fcdbf5756d8f0074d445fa9de --- /dev/null +++ b/detail_png/Shaft_01165_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0978aeffc709b6755df606e02aa236af143fb520c01f962ba260b01dc03019e1 +size 17881 diff --git a/detail_png/Shaft_01165_title.png b/detail_png/Shaft_01165_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6071f8fc24562a8ec69e2586feeb6be88f58f077 --- /dev/null +++ b/detail_png/Shaft_01165_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9843ef9fc3e774858a10cbf78bfe264f12e580981079476665e3520ead900135 +size 27834 diff --git a/detail_png/Shaft_01168_diam.png b/detail_png/Shaft_01168_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b383385161793cfb826eed2b2b5ba037c74d431d --- /dev/null +++ b/detail_png/Shaft_01168_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962d0e377b6f09bf698f9731418ad8039175af32e7337bfef37b0b6bcc33e0d3 +size 35046 diff --git a/detail_png/Shaft_01168_length.png b/detail_png/Shaft_01168_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f01c339d4ab622e3e8ffd995694277a5ff8033da --- /dev/null +++ b/detail_png/Shaft_01168_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b497480d52185b7804589493f31a9376b118be865271bb669b056cfdfcea01e5 +size 48194 diff --git a/detail_png/Shaft_01168_title.png b/detail_png/Shaft_01168_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ddfefcaf4b5174e6374918e47fa6412aab238ef1 --- /dev/null +++ b/detail_png/Shaft_01168_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cd09afd14f80af758413553c9d746494b0a085a317354d8cf4988b89478f38d +size 32678 diff --git a/detail_png/Shaft_01170_diam.png b/detail_png/Shaft_01170_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fae8089a44735a174eba2e7f6785c0bb4beeb61b --- /dev/null +++ b/detail_png/Shaft_01170_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:228741eb4b243348b16646db8659fbb1b8a2c7276daeb6cac17a277ae4c6d904 +size 20971 diff --git a/detail_png/Shaft_01170_length.png b/detail_png/Shaft_01170_length.png new file mode 100644 index 0000000000000000000000000000000000000000..592925053d580d4b0ddf730763f4d75129648425 --- /dev/null +++ b/detail_png/Shaft_01170_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b7148f0718c2303a29937242f1f81b676d9b65ebf0a08143ba197608ed28b20 +size 27623 diff --git a/detail_png/Shaft_01170_title.png b/detail_png/Shaft_01170_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cd3109c59f2f50eefe221f03c3c13a4862398ff7 --- /dev/null +++ b/detail_png/Shaft_01170_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31010f26355600c444b2022bb0822889b5dee008e099e21a52a5f0263acffbeb +size 27447 diff --git a/detail_png/Shaft_01171_diam.png b/detail_png/Shaft_01171_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bfd215de1111002f6213765cbb5f8cc66ad7850d --- /dev/null +++ b/detail_png/Shaft_01171_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30595cfb4ab59cbb095babe041af8fb5f9399c86ad0a1775ceadfeb019142ba0 +size 30286 diff --git a/detail_png/Shaft_01171_length.png b/detail_png/Shaft_01171_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1f6a515768f5ff152ec2129ce726ea9f14ed845a --- /dev/null +++ b/detail_png/Shaft_01171_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf61af433dde83066d31e667a0d26f41d1a33d468dacc6112fd439d1a3f859d7 +size 26298 diff --git a/detail_png/Shaft_01171_title.png b/detail_png/Shaft_01171_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5a7764464e20e894967b2498a0d2575b19769339 --- /dev/null +++ b/detail_png/Shaft_01171_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d2ab1553714cb50915e206650ad12b86acd5b77dd364ebd4f8a401d1b4756d9 +size 24962 diff --git a/detail_png/Shaft_01172_diam.png b/detail_png/Shaft_01172_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..742be65e3123d7819573ac6faf298841b6183ec6 --- /dev/null +++ b/detail_png/Shaft_01172_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65b547d93433e18948dd857ee2644d313d89c717729a8ccd122daf99a60771a6 +size 19740 diff --git a/detail_png/Shaft_01172_length.png b/detail_png/Shaft_01172_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7bcd6ff2b10ff1f810c88e942d9a6f769fed2ae4 --- /dev/null +++ b/detail_png/Shaft_01172_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5de105a9d9888c0fc3cb6a38bceda7df314386c1c811066347eddfe29b44ec6 +size 15161 diff --git a/detail_png/Shaft_01172_title.png b/detail_png/Shaft_01172_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1380c76652c1e2a6884904c464bb1dcb5b9268d1 --- /dev/null +++ b/detail_png/Shaft_01172_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ff7cbe359bc9c35e1fd4389b4f6cd94fe1621ac68b1d3e88c412283636817f5 +size 15808 diff --git a/detail_png/Shaft_01174_diam.png b/detail_png/Shaft_01174_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..957d40a85e27aade6c9426037b6ea06f111c6ee7 --- /dev/null +++ b/detail_png/Shaft_01174_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fa67f80c5ada1426660b296a04a6d9f635c4abacf7f2d7e3a5140ae058905ad +size 23590 diff --git a/detail_png/Shaft_01174_length.png b/detail_png/Shaft_01174_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d7515c65b95a0578a18285bc0d195120e7067ced --- /dev/null +++ b/detail_png/Shaft_01174_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:faea6a66c1c7fd6c2317589fa73717e05526d7a64edfdd0726b8216f7a5fea0c +size 19227 diff --git a/detail_png/Shaft_01174_title.png b/detail_png/Shaft_01174_title.png new file mode 100644 index 0000000000000000000000000000000000000000..36cfd5ecfb206683fc3c3fb2de51abae69073efd --- /dev/null +++ b/detail_png/Shaft_01174_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb3c250f45513485740effdaee6a2060aea5016a61ee78fe14282e1510374725 +size 18761 diff --git a/detail_png/Shaft_01176_diam.png b/detail_png/Shaft_01176_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ba404ea1d33cf8c0189ab0419f45856062ee2111 --- /dev/null +++ b/detail_png/Shaft_01176_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c75f4baffb0e8f13208650e9c6a5131c78def637dadddb487396a3f423f7be9 +size 24046 diff --git a/detail_png/Shaft_01176_length.png b/detail_png/Shaft_01176_length.png new file mode 100644 index 0000000000000000000000000000000000000000..789b69d4e3a4c62caf08e7d4c06370b9a3fbcce4 --- /dev/null +++ b/detail_png/Shaft_01176_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c745794b1ca578ccc296b3fe32f4dba1ba6e7e16a4deed6a3c200abba3ef3283 +size 27340 diff --git a/detail_png/Shaft_01176_title.png b/detail_png/Shaft_01176_title.png new file mode 100644 index 0000000000000000000000000000000000000000..410f254b6e7a6e0127f42c11728ca052fc347e4d --- /dev/null +++ b/detail_png/Shaft_01176_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:470dc28d788bbcded8d48ec7882d5b98434f3ce9bf6a55ebb6830c692aaa5ce5 +size 30675 diff --git a/detail_png/Shaft_01182_diam.png b/detail_png/Shaft_01182_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4f463e9a6bc0c0de3fc79584f4e5699be13c76dc --- /dev/null +++ b/detail_png/Shaft_01182_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70760e4fc7bab6bffbafb99a608b899bfd829461b964834a1df8c2361d42f9ab +size 19930 diff --git a/detail_png/Shaft_01182_length.png b/detail_png/Shaft_01182_length.png new file mode 100644 index 0000000000000000000000000000000000000000..79800ab768b1b0dd2115b187d0a90eda73a14b40 --- /dev/null +++ b/detail_png/Shaft_01182_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6611b0910270152002d118a27e8c563f8a2e02ffeeacb02c1c0d295a96041cee +size 15512 diff --git a/detail_png/Shaft_01182_title.png b/detail_png/Shaft_01182_title.png new file mode 100644 index 0000000000000000000000000000000000000000..663506dd3f3cd690ba3af21a031bcacca0cb076a --- /dev/null +++ b/detail_png/Shaft_01182_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:171f191ec81b07701f4ac13ea09d90b3cfa7112a2144db2a5197cbde2fe46942 +size 22126 diff --git a/detail_png/Shaft_01184_diam.png b/detail_png/Shaft_01184_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c551b98913f9ea97ed5cd577c0809d04ccfd06f --- /dev/null +++ b/detail_png/Shaft_01184_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea908a201c353b08f113a8a69837dcf6d344eb4a223044f8188c4d5f83d3320c +size 28553 diff --git a/detail_png/Shaft_01184_length.png b/detail_png/Shaft_01184_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cc3dc4530dc23ce5ae5454ab8d61b111c270cfe0 --- /dev/null +++ b/detail_png/Shaft_01184_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ff72a5f86d77d7061715d2c91cac4ee137964eb1697becf955e5150e450c2aa +size 22577 diff --git a/detail_png/Shaft_01184_title.png b/detail_png/Shaft_01184_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6815e2863fc86c71af9c6752ea1cf49d42d391ad --- /dev/null +++ b/detail_png/Shaft_01184_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d6c29f6e47d85aa8194d60c61000c778e697d095c98e1f04f95cc591f8a7d17 +size 18836 diff --git a/detail_png/Shaft_01185_diam.png b/detail_png/Shaft_01185_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..be093a4c948c9a3a638525a78801b0abd31cca32 --- /dev/null +++ b/detail_png/Shaft_01185_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1db3a076a53fecd312ac6bc4300345afdf73ec310e8b9f6367760c47514f5811 +size 19307 diff --git a/detail_png/Shaft_01185_length.png b/detail_png/Shaft_01185_length.png new file mode 100644 index 0000000000000000000000000000000000000000..782f71a902fb0db80d1274789d1931c7114bd4a8 --- /dev/null +++ b/detail_png/Shaft_01185_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d627c1cfa38c7326a67329783c07c698cb67aae4367b835ecf7065258cb6dea8 +size 18774 diff --git a/detail_png/Shaft_01185_title.png b/detail_png/Shaft_01185_title.png new file mode 100644 index 0000000000000000000000000000000000000000..69ce5a7b0c7bc4fa071b3de1600d765037ddc1b6 --- /dev/null +++ b/detail_png/Shaft_01185_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:897f7871784fd8b006cee9b2ca6b18918a3fda8cf6debbcf3e03dded2882f4ba +size 30769 diff --git a/detail_png/Shaft_01192_diam.png b/detail_png/Shaft_01192_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f37669d24d5f16f0ebbb904998e907fb9de90f32 --- /dev/null +++ b/detail_png/Shaft_01192_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cefa734cee4f78dab19d63aefdb7f7e15ad0858b15abc83235e90ed866e0310 +size 29723 diff --git a/detail_png/Shaft_01192_length.png b/detail_png/Shaft_01192_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e0fd8f0ae26652a9355b040ed324cd772ee8a5e2 --- /dev/null +++ b/detail_png/Shaft_01192_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ba4e6a0fd1e2f585306780c3e64bcbc60681c22aa67e5abdb9597c0984de0aa +size 33457 diff --git a/detail_png/Shaft_01192_title.png b/detail_png/Shaft_01192_title.png new file mode 100644 index 0000000000000000000000000000000000000000..153fe1059e5444c90b859324fbd84e1a6f4b4daf --- /dev/null +++ b/detail_png/Shaft_01192_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9ef63ba62f6333d6d3ed0c59e7e33c2f0ea59da894724a7dc31c1d69dbed938 +size 28920 diff --git a/detail_png/Shaft_01193_diam.png b/detail_png/Shaft_01193_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..325b402cd51e91d5e7d718b641c2eb1f251ae863 --- /dev/null +++ b/detail_png/Shaft_01193_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7596041304ca790f38ed2339ee5693a21972ab87c5559cfa8ea3e4a91330d50 +size 36226 diff --git a/detail_png/Shaft_01193_length.png b/detail_png/Shaft_01193_length.png new file mode 100644 index 0000000000000000000000000000000000000000..261d862bbafc5877bb6f3a86e981f2b1d966871f --- /dev/null +++ b/detail_png/Shaft_01193_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95aa1e2edff21d6987edcef77df7093bf49620b8f5a309f5a4d3443d6ac6c3fd +size 41728 diff --git a/detail_png/Shaft_01193_title.png b/detail_png/Shaft_01193_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bbede1cbace513576cb89b3da2245f17ecbcc918 --- /dev/null +++ b/detail_png/Shaft_01193_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:494bc327c4248fe78061814d3e13b57368ac5da20c945f79a44539b63721d78a +size 31733 diff --git a/detail_png/Shaft_01199_diam.png b/detail_png/Shaft_01199_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fa8d1a8d53c8a227a2141c8abcb5fd8c94f3ce15 --- /dev/null +++ b/detail_png/Shaft_01199_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f17a632c06f2846e39b298471a38453bdc3e26eface6892556d08ae29cae279f +size 37819 diff --git a/detail_png/Shaft_01199_length.png b/detail_png/Shaft_01199_length.png new file mode 100644 index 0000000000000000000000000000000000000000..49f52838954d2c9486328732ea9f495c6d0b5fd3 --- /dev/null +++ b/detail_png/Shaft_01199_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c590c9d2ac1d04ed889f95157f0cac84c5dd11262f95b41f4f1f62feef2c07a9 +size 51457 diff --git a/detail_png/Shaft_01199_title.png b/detail_png/Shaft_01199_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6576eec3b7f45d258e8093f0891647e657fb0880 --- /dev/null +++ b/detail_png/Shaft_01199_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07dfae329e7599c01e53b10b191dd1def6e388eb2c0f0756eedd1ba46bc0f14b +size 29826 diff --git a/detail_png/Shaft_01201_diam.png b/detail_png/Shaft_01201_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..11483de9479a6a3d49dfed5fffc08a0278ad7405 --- /dev/null +++ b/detail_png/Shaft_01201_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09b904fe751c14e65d5503fc35633446255288bba9bbe4ad171ac400084c27d3 +size 32830 diff --git a/detail_png/Shaft_01201_length.png b/detail_png/Shaft_01201_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c69397a10e82587057a0152395eb424ef6114106 --- /dev/null +++ b/detail_png/Shaft_01201_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dfc8ecc069432a21fd4e654460d7d86304c1fb0451930f9b645783c7d322ba5 +size 31998 diff --git a/detail_png/Shaft_01201_title.png b/detail_png/Shaft_01201_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3b60192fe3cfdf78d4757111037627b47e1870e3 --- /dev/null +++ b/detail_png/Shaft_01201_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b20125af17b28683a9b3f6eca16557afdb8635038f02abc66bb87601f2d6723 +size 30511 diff --git a/detail_png/Shaft_01208_diam.png b/detail_png/Shaft_01208_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1b4fa5239d5853f5ffef12d7f2161650b01c2370 --- /dev/null +++ b/detail_png/Shaft_01208_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:479fb3de4ba02033bae0e20c383662afac8d95cf2767e372e846250195bf8882 +size 24594 diff --git a/detail_png/Shaft_01208_length.png b/detail_png/Shaft_01208_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2b778d44eae1bf636d0c3dc86886cee923a07f77 --- /dev/null +++ b/detail_png/Shaft_01208_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e9efe81ae1e33bc8fd3efac908cb3ad5b5f1f0fe3472ab575b8a0bc304441b6 +size 34662 diff --git a/detail_png/Shaft_01208_title.png b/detail_png/Shaft_01208_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1d6fc34a9afdc1125a88f0167bdc415d0a314e88 --- /dev/null +++ b/detail_png/Shaft_01208_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c2aa3e784b174d175ada2df9979ae418d9b7022ec4a31bf578e71f98a47d651 +size 35905 diff --git a/detail_png/Shaft_01210_diam.png b/detail_png/Shaft_01210_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1cffe4a791d0c9fd01a3d93421a6d180dfcf349f --- /dev/null +++ b/detail_png/Shaft_01210_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86fab1c52d2ff06c5f7e785be93b2ca826022fd46f09ec1d8ddc3c3911e96594 +size 24668 diff --git a/detail_png/Shaft_01210_length.png b/detail_png/Shaft_01210_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d2833626de80d0e6658a47a527656fe5366d6568 --- /dev/null +++ b/detail_png/Shaft_01210_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c2c38763b80158152c4c6338c477a3f04e700d0026fc18a10992d8bdb33b30e +size 22729 diff --git a/detail_png/Shaft_01210_title.png b/detail_png/Shaft_01210_title.png new file mode 100644 index 0000000000000000000000000000000000000000..add47e5093db6cd156ef5a7196abe93bdb6baf1d --- /dev/null +++ b/detail_png/Shaft_01210_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f0ba473c1fbfa0737a89b71b6496330d8da7a7c3f1218391f0bc218ea9fa22c +size 23911 diff --git a/detail_png/Shaft_01217_diam.png b/detail_png/Shaft_01217_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9d9baea69a60a32e21bf22f7ef1d1f0f9149b1e2 --- /dev/null +++ b/detail_png/Shaft_01217_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8999168abf69304cb3788ffd2e055979da0cbdaeb75014ffa7970c36cb531d77 +size 20380 diff --git a/detail_png/Shaft_01217_length.png b/detail_png/Shaft_01217_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a37b9c7a6826e3dd2c64a9e1fa2163ede301c189 --- /dev/null +++ b/detail_png/Shaft_01217_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8e9bfcda93ba9432bc23568148d08f550754946051a9734a1c00f952d589abd +size 16000 diff --git a/detail_png/Shaft_01217_title.png b/detail_png/Shaft_01217_title.png new file mode 100644 index 0000000000000000000000000000000000000000..06798207d20976a35031cba0a5393413955ae9f9 --- /dev/null +++ b/detail_png/Shaft_01217_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74c96f226350c79ded0635391b8de7775b9d660f34a55a2ccaf371de120af250 +size 19199 diff --git a/detail_png/Shaft_01218_diam.png b/detail_png/Shaft_01218_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0bca41d2c78bd354d3236ac340c4b8030741eca2 --- /dev/null +++ b/detail_png/Shaft_01218_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc46a7f9b5262d3311302c7b461b33aa1d174466f4028a85de9cc33a34988587 +size 41530 diff --git a/detail_png/Shaft_01218_length.png b/detail_png/Shaft_01218_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cf87f5f89e3c0c7797925ad375ebeb0d729cb15c --- /dev/null +++ b/detail_png/Shaft_01218_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e043ed87913e90277ea27c80b182cf2eb4dc7933b9c601fd30fd2d90fef7660b +size 46625 diff --git a/detail_png/Shaft_01218_title.png b/detail_png/Shaft_01218_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d393252d7e456e000b9708e14b7d38d435d2fce5 --- /dev/null +++ b/detail_png/Shaft_01218_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14c2b5a43d2b681c4467059acefe893f9991d685b5d6f6e4ff4a304fb6125078 +size 28965 diff --git a/detail_png/Shaft_01219_diam.png b/detail_png/Shaft_01219_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a03cb3fc71c59d4752e05aa2f58d32b638710012 --- /dev/null +++ b/detail_png/Shaft_01219_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15b6e86d47c1993041e49afb23ee699934920dfc631b0f3c01db119ea1f71974 +size 29831 diff --git a/detail_png/Shaft_01219_length.png b/detail_png/Shaft_01219_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d9ae1bf8682b971fa94e2526c40b95f49c5001c4 --- /dev/null +++ b/detail_png/Shaft_01219_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b22da755bfe3a34415b5d041130e822897380191e816e6f1cd732c78eab17d9 +size 22506 diff --git a/detail_png/Shaft_01219_title.png b/detail_png/Shaft_01219_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1bf95e9d3c7591f0f4f93c3ee77c5f7f0afdc82b --- /dev/null +++ b/detail_png/Shaft_01219_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a16bb8b42c40d0e0e0bdbec27ddc57a44bc2c5d32fb4bc09a1e9809157eb1b63 +size 23783 diff --git a/detail_png/Shaft_01223_diam.png b/detail_png/Shaft_01223_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..52133d243357ec084a300f16e06bb6a4131408e7 --- /dev/null +++ b/detail_png/Shaft_01223_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:131aa1049a5018a9392ffdd1c65e2a60a1196313aebe97c613a1651b1fa6f1f7 +size 31600 diff --git a/detail_png/Shaft_01223_length.png b/detail_png/Shaft_01223_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8c686cb0bcdec1d70f9c7fbba2a35d1d3d2d478c --- /dev/null +++ b/detail_png/Shaft_01223_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d40ea0f57d1d244979d9731d0e2bfec0231deb9f8aee11ab3adadb4aafd3f5fa +size 25230 diff --git a/detail_png/Shaft_01223_title.png b/detail_png/Shaft_01223_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2ef533325184eb947b7435ee6a148d2c6787712b --- /dev/null +++ b/detail_png/Shaft_01223_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:215b2ab40b1c53b488b9f0cdbc77ccaecb73ebe58a7f32007cad2d9e697ed3b4 +size 28645 diff --git a/detail_png/Shaft_01235_diam.png b/detail_png/Shaft_01235_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..795118538e866649161121a749926d1fc7a80541 --- /dev/null +++ b/detail_png/Shaft_01235_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7a0f2bea9e2ac4a1636285bd340346c78e5e0f2f4cebacbbe0bef87a864a29e +size 31420 diff --git a/detail_png/Shaft_01235_length.png b/detail_png/Shaft_01235_length.png new file mode 100644 index 0000000000000000000000000000000000000000..243408a4cb9d1acc878b086aea4afa60cafac6bf --- /dev/null +++ b/detail_png/Shaft_01235_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:344f58b94e807f9b01e2bd314a89f4b0bf40a943d9eb08378c82bdc512d72129 +size 30991 diff --git a/detail_png/Shaft_01235_title.png b/detail_png/Shaft_01235_title.png new file mode 100644 index 0000000000000000000000000000000000000000..da3e2df877f76f1250fff2f787f6e609bc2667ec --- /dev/null +++ b/detail_png/Shaft_01235_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b7bfd760061cdea5fa42d067ebe98990c476b49753ce9c83f1593b81b55ce1e +size 31821 diff --git a/detail_png/Shaft_01236_diam.png b/detail_png/Shaft_01236_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2c8b24de06a18cc9bcd15a6a47f32fc90620ef7a --- /dev/null +++ b/detail_png/Shaft_01236_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18b40981e591f7f270ed87eb381a2e47e78241ae08a8c9c503d9498e5c004b29 +size 30600 diff --git a/detail_png/Shaft_01236_length.png b/detail_png/Shaft_01236_length.png new file mode 100644 index 0000000000000000000000000000000000000000..20c51734e7063531410cf4f8fceaee84acd00468 --- /dev/null +++ b/detail_png/Shaft_01236_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6026bfd0914380502f08cabd291fba32ff899d73c6bebe780c1c8944ec7d3b3 +size 26831 diff --git a/detail_png/Shaft_01236_title.png b/detail_png/Shaft_01236_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2e832333634107dc3dba8ef6bc73b62ed3ebfa9a --- /dev/null +++ b/detail_png/Shaft_01236_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7639b2ff65708bdc50d24e5519a767794b3ebae034711d50396ac723295376d5 +size 28087 diff --git a/detail_png/Shaft_01239_diam.png b/detail_png/Shaft_01239_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b00b2ba1468d8c196ce3e2fb0c318a10e8f6959e --- /dev/null +++ b/detail_png/Shaft_01239_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fd29fcc62cc0f1555ec8713146f7cb2d6cb81d055ad7785bbbbab0c15468a10 +size 35345 diff --git a/detail_png/Shaft_01239_length.png b/detail_png/Shaft_01239_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e51128a419f5a87877d0705bda72aec7cefe06d1 --- /dev/null +++ b/detail_png/Shaft_01239_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fe43d0aedf503acdd5bef1e9c6cd45f9db17d5a73384c2cb5882c3911bb67ab +size 39293 diff --git a/detail_png/Shaft_01239_title.png b/detail_png/Shaft_01239_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ae1fe2442709330e2bfb468e6de070ba36d7fcf6 --- /dev/null +++ b/detail_png/Shaft_01239_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d65ebfe6876caa2cc548960cd0e084936ceaeeda8796c8cdd19952dab1229d1 +size 35692 diff --git a/detail_png/Shaft_01240_diam.png b/detail_png/Shaft_01240_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c2c07c2fdfacb6159033ae878fc37f9c68ca167b --- /dev/null +++ b/detail_png/Shaft_01240_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9ac78e15329e27d26b7fdbc93c1a5a2fd874064636b8c73df2a9565514b07d6 +size 23983 diff --git a/detail_png/Shaft_01240_length.png b/detail_png/Shaft_01240_length.png new file mode 100644 index 0000000000000000000000000000000000000000..955e72082f93b120c0d087cdf37ca3216c8804be --- /dev/null +++ b/detail_png/Shaft_01240_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53197d322d2c34ef03f796ff79e6b126a8a29c898206e99dda65c9386ba4ef7e +size 19610 diff --git a/detail_png/Shaft_01240_title.png b/detail_png/Shaft_01240_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7805cc5d2faf071d6bc71e48db1a643bccafed0c --- /dev/null +++ b/detail_png/Shaft_01240_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2462672e9c9a5f8a05b8a9eebb3c498e1bfd347cb87a0caace0139151b467a3f +size 22249 diff --git a/detail_png/Shaft_01244_diam.png b/detail_png/Shaft_01244_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6f89e53737f0d63ff41452518be9e143ad57f5aa --- /dev/null +++ b/detail_png/Shaft_01244_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ffad855f6a27f241241a4fa5c34d3ae3f33b7e6a9576bba8f7f6d649b50b04b +size 34280 diff --git a/detail_png/Shaft_01244_length.png b/detail_png/Shaft_01244_length.png new file mode 100644 index 0000000000000000000000000000000000000000..43caaf650d9a4aa5bcb7bf3595589f7f7e1efab1 --- /dev/null +++ b/detail_png/Shaft_01244_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67a4c8cd42c1d438e42d8cf6c652f06607a1eaf829408ec45f76972bac9a04f5 +size 28508 diff --git a/detail_png/Shaft_01244_title.png b/detail_png/Shaft_01244_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9c9500605e42fd75e3f45d519af39283d0b6baf3 --- /dev/null +++ b/detail_png/Shaft_01244_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3e8e0e22b87f708ef843cfae8725b66a99e34063c50f0e7c836c8bae5f855ad +size 24006 diff --git a/detail_png/Shaft_01246_diam.png b/detail_png/Shaft_01246_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3b26e0e5d41e915f878d42e0560d8d515bb315cf --- /dev/null +++ b/detail_png/Shaft_01246_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5591942528ef5b247f7055d4564bc90934161a2e091b55294ed34b45b3346747 +size 34001 diff --git a/detail_png/Shaft_01246_length.png b/detail_png/Shaft_01246_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0bd1ef4a58110f55fc5e9401dcaab767a0346865 --- /dev/null +++ b/detail_png/Shaft_01246_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01f2c79c1107739eda3b2ac3f8fe80af4b7992057590274fdd78a6d06ea1741a +size 27821 diff --git a/detail_png/Shaft_01246_title.png b/detail_png/Shaft_01246_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5132425660742b53aa395de3a165cfc0c6aa3cae --- /dev/null +++ b/detail_png/Shaft_01246_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d89d412515e9dc9d8c6ac0da36f7ceb3a0ecaf294fecf654ace625462a7fcc55 +size 30813 diff --git a/detail_png/Shaft_01260_diam.png b/detail_png/Shaft_01260_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..133206d03447c2f27d77e4005297110a8c73fbb7 --- /dev/null +++ b/detail_png/Shaft_01260_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bbe818070af4708554b92673a97fb6745babb9b733fd386e630caaa9860ae2d +size 25853 diff --git a/detail_png/Shaft_01260_length.png b/detail_png/Shaft_01260_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a27e0ca9796452fc98c2e9eb4645ff2a06354756 --- /dev/null +++ b/detail_png/Shaft_01260_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1c708e63320d688b9ccf170dbe378a574bf0f87f2357750f2bdb6b1531659cf +size 26169 diff --git a/detail_png/Shaft_01260_title.png b/detail_png/Shaft_01260_title.png new file mode 100644 index 0000000000000000000000000000000000000000..26b7a104f3c4ac65350c1f2c667626151e9a46c2 --- /dev/null +++ b/detail_png/Shaft_01260_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a05b43dd5f04f22555f2d72e52fd2f0f4c87abbdced43558e641d2b9a664520 +size 29052 diff --git a/detail_png/Shaft_01261_diam.png b/detail_png/Shaft_01261_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..958f75a9c2b42b019ef99edaec142812aae98058 --- /dev/null +++ b/detail_png/Shaft_01261_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7fec2a53dbc3defcd2632956079bf1820e2318fe7502ca7249ee5ec94aa1f7a +size 23461 diff --git a/detail_png/Shaft_01261_length.png b/detail_png/Shaft_01261_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7d26c30ade82b84699bcfcbc7bd277e735e438f7 --- /dev/null +++ b/detail_png/Shaft_01261_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe96157e0f12ad72d119dc7d824aa2c9b4b5647a9dd9ec4719bdda9d849b1b07 +size 25882 diff --git a/detail_png/Shaft_01261_title.png b/detail_png/Shaft_01261_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4f2c1b06fc3291b7a311171620b0a63288fd5966 --- /dev/null +++ b/detail_png/Shaft_01261_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de958541490c3246a2d73d57fad5bbb887128ed575a214a4f7dd95460a4b0d92 +size 30897 diff --git a/detail_png/Shaft_01262_diam.png b/detail_png/Shaft_01262_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25af740e16d238bdbb172cc4ea3bc71bb62d7fce --- /dev/null +++ b/detail_png/Shaft_01262_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3d9a3e0f253440891135ca91fca130458b16dd5aeccea39eb53f51ffad25cf5 +size 29292 diff --git a/detail_png/Shaft_01262_length.png b/detail_png/Shaft_01262_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1169bbde8eaba45056c663ef62f552d501658f1 --- /dev/null +++ b/detail_png/Shaft_01262_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb62b100eb698caff9be0b9a100046f196b28d31190005c201e5151a3cc6e20a +size 22753 diff --git a/detail_png/Shaft_01262_title.png b/detail_png/Shaft_01262_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1345575f869e06865641081ea05e20c439639ca0 --- /dev/null +++ b/detail_png/Shaft_01262_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd96b77904cad4e595ebad2618821f165b81be580234e195e4c22c0d372736a8 +size 19277 diff --git a/detail_png/Shaft_01267_diam.png b/detail_png/Shaft_01267_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8284df4c2191f3458427f1e6e57a3da1caa639af --- /dev/null +++ b/detail_png/Shaft_01267_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6083d182d16a748701006ff44546605ac35b16fa055ca2aee017ef5aa9438b3f +size 18856 diff --git a/detail_png/Shaft_01267_length.png b/detail_png/Shaft_01267_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ce990ede9a1c5187863753e4b48866a9ceb3cc32 --- /dev/null +++ b/detail_png/Shaft_01267_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7fc3407e64434da959577db52c21bc6b9404b0c68bdf245469f93a3452eb8d2 +size 18529 diff --git a/detail_png/Shaft_01267_title.png b/detail_png/Shaft_01267_title.png new file mode 100644 index 0000000000000000000000000000000000000000..955a7816c58663e8e7ebe085a1ed4466484ff199 --- /dev/null +++ b/detail_png/Shaft_01267_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a1ae1ec5a9504435e72a3faa5bfd54ce3854bc36f8f2dbb14b4b19c5eb48688 +size 33866 diff --git a/detail_png/Shaft_01268_diam.png b/detail_png/Shaft_01268_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9f3d81b2b0b1c9224d26d6bb46e2f7737c896173 --- /dev/null +++ b/detail_png/Shaft_01268_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f3d312c23ddb739591015d21c89eb58f6fd9174f39b7246b1e1bb13b118bfa5 +size 30689 diff --git a/detail_png/Shaft_01268_length.png b/detail_png/Shaft_01268_length.png new file mode 100644 index 0000000000000000000000000000000000000000..08e1f5a859e9cf175acb29ecad85e0c443b78f0e --- /dev/null +++ b/detail_png/Shaft_01268_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1453bb3b70cfd19c42e33f6677b4cf81752bbf1d981ea4f45d79be010bfef44c +size 30841 diff --git a/detail_png/Shaft_01268_title.png b/detail_png/Shaft_01268_title.png new file mode 100644 index 0000000000000000000000000000000000000000..32014c7e455cc62576fe1181a1f39b30d844e966 --- /dev/null +++ b/detail_png/Shaft_01268_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e5f9bc1143dc4ca92c89992284ae3af74be637eb20adc705f838957f24366d6 +size 30404 diff --git a/detail_png/Shaft_01272_diam.png b/detail_png/Shaft_01272_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e9521ec5755ee1e9af7473ecef950e0ced650195 --- /dev/null +++ b/detail_png/Shaft_01272_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7c044e7cc9a050894b6d1e64ea870596c4913b43965d3dc94d0c76de0b53d80 +size 36577 diff --git a/detail_png/Shaft_01272_length.png b/detail_png/Shaft_01272_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5994ff6a1368cfe505bda980469d7178fadd9f38 --- /dev/null +++ b/detail_png/Shaft_01272_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:583ac4151cdefdff4c4ffd6d0b476dcb99203b159574df654fb008d1e8fcd7d1 +size 48872 diff --git a/detail_png/Shaft_01272_title.png b/detail_png/Shaft_01272_title.png new file mode 100644 index 0000000000000000000000000000000000000000..93e15490819c669a0dc50794b6d51b1c0ace1014 --- /dev/null +++ b/detail_png/Shaft_01272_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88f8883700616018de92e18bf38e67a62a4781cd584d347645aa68168aa30ff9 +size 31516 diff --git a/detail_png/Shaft_01274_diam.png b/detail_png/Shaft_01274_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ed50f1acf661dc4f8f5e0d646f244a6d6d28430a --- /dev/null +++ b/detail_png/Shaft_01274_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c58bd8eb7fd228feb5d71035f750774bd46dbc07a4b88398fdcc6b9fc050d120 +size 24890 diff --git a/detail_png/Shaft_01274_length.png b/detail_png/Shaft_01274_length.png new file mode 100644 index 0000000000000000000000000000000000000000..876d46fe9fac2595d54f32a1f4ed5119af07c37b --- /dev/null +++ b/detail_png/Shaft_01274_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e42de20959e74e8d438874c6a76480772a05d227a1d4c30af38b486a09e72fd +size 18298 diff --git a/detail_png/Shaft_01274_title.png b/detail_png/Shaft_01274_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c959b9bffd54ba572f98511912406c52c244a581 --- /dev/null +++ b/detail_png/Shaft_01274_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04c997d9f877233d9ff7d2ed2a7f7b12c194e9a5afa5ccb182a392712a0900ec +size 18933 diff --git a/detail_png/Shaft_01280_diam.png b/detail_png/Shaft_01280_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b9805eb698737dfdd3a8f84653d7a46d38d8cfa9 --- /dev/null +++ b/detail_png/Shaft_01280_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4ad2d351aa84654aedfb6dc466e655d8d191baddbc895eb19a225eaaf94f44a +size 20085 diff --git a/detail_png/Shaft_01280_length.png b/detail_png/Shaft_01280_length.png new file mode 100644 index 0000000000000000000000000000000000000000..051651d607ce322ac2185d1c2ad9d924fabe1df2 --- /dev/null +++ b/detail_png/Shaft_01280_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0d0cf950e33bbcad89bbf061af45261b7f28a69f6f95f734227c7c9ae5692d9 +size 15796 diff --git a/detail_png/Shaft_01280_title.png b/detail_png/Shaft_01280_title.png new file mode 100644 index 0000000000000000000000000000000000000000..76f075f633961b3b665fa9102a7300e4dba8d841 --- /dev/null +++ b/detail_png/Shaft_01280_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c859e6ef2a62942f63d3bc34cff68d60fa4b4846ca534573ed962975554e5022 +size 18534 diff --git a/detail_png/Shaft_01281_diam.png b/detail_png/Shaft_01281_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6526c8f0ed6e4b16c8ee81c8f59d1a8500ab1489 --- /dev/null +++ b/detail_png/Shaft_01281_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f164f64978758ab21a010f8253814b3728fb937fba5f55144bef5827e872f4ca +size 31532 diff --git a/detail_png/Shaft_01281_length.png b/detail_png/Shaft_01281_length.png new file mode 100644 index 0000000000000000000000000000000000000000..10619061c35f4b27638420449076c548006b3966 --- /dev/null +++ b/detail_png/Shaft_01281_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15c54bd1ede420fe96a5178d3b0631b6d53921160fd8c26b5387703d1064bbab +size 39837 diff --git a/detail_png/Shaft_01281_title.png b/detail_png/Shaft_01281_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e35bf4b10eb3c7c151a14331d68eaaaf8113115f --- /dev/null +++ b/detail_png/Shaft_01281_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:363a3b71c324d55e361de7bd9114e22a2804eb269efa00581ccb029d802fdf5c +size 34927 diff --git a/detail_png/Shaft_01283_diam.png b/detail_png/Shaft_01283_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5077d915393a529039c7d5ddafdaddfe880a5687 --- /dev/null +++ b/detail_png/Shaft_01283_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0d6776bddc8160ff97e5e4a307bfbc20968c1bbcd65e861658e9a3383f021c7 +size 31217 diff --git a/detail_png/Shaft_01283_length.png b/detail_png/Shaft_01283_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a1c045d496cad6aa1d096501dbe58e55236cf500 --- /dev/null +++ b/detail_png/Shaft_01283_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:531e77bad0f395d1b0634780d23f31e4292458fbcfd176f86e4c0851e4b5d6d2 +size 43520 diff --git a/detail_png/Shaft_01283_title.png b/detail_png/Shaft_01283_title.png new file mode 100644 index 0000000000000000000000000000000000000000..955078223d2940fe678ba721e5b5e2f94d5ee327 --- /dev/null +++ b/detail_png/Shaft_01283_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c4bca25ff43a98e67515ff3430ea3b8fac7f8772deac86dec426ec2a768866d +size 36372 diff --git a/detail_png/Shaft_01290_diam.png b/detail_png/Shaft_01290_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7de7ab5537f7372bc7340f55bff668cdd09b1c1d --- /dev/null +++ b/detail_png/Shaft_01290_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83fe17ee7a33e1565c0173d9a6ceabbe7136e8c0e3184a99d3dd9700b3b16109 +size 29244 diff --git a/detail_png/Shaft_01290_length.png b/detail_png/Shaft_01290_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8bce5ce9814d05d0354e84a5eba41851f36dca2b --- /dev/null +++ b/detail_png/Shaft_01290_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e8870fb4c2a200ea2c9d830740ca8e30c662aa1011d5318248ab93c3231d7d8 +size 24875 diff --git a/detail_png/Shaft_01290_title.png b/detail_png/Shaft_01290_title.png new file mode 100644 index 0000000000000000000000000000000000000000..925af2cc9979bf14e575990df57318d34e02fcf9 --- /dev/null +++ b/detail_png/Shaft_01290_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18127e9078611d8a99d4c87eab23b02054c139cfa3789f3406e2bd0adf0340e5 +size 20951 diff --git a/detail_png/Shaft_01310_diam.png b/detail_png/Shaft_01310_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d74eb9af5e2c78afed1ae03f75cdcace63eadb02 --- /dev/null +++ b/detail_png/Shaft_01310_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:994725ae87a76a570a57dcd5375e5741a484a331060ea081912037d9421f2092 +size 20800 diff --git a/detail_png/Shaft_01310_length.png b/detail_png/Shaft_01310_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c6a051ee9d76dd185e8dd60aa19f3fed5e6fb10e --- /dev/null +++ b/detail_png/Shaft_01310_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98b9df08b28bfa09d54b68ee141b9499fd8385eaa9dc4a0e2415a3495089ba63 +size 15629 diff --git a/detail_png/Shaft_01310_title.png b/detail_png/Shaft_01310_title.png new file mode 100644 index 0000000000000000000000000000000000000000..48c85be12a7cea04b548db67f69b5680f4d22430 --- /dev/null +++ b/detail_png/Shaft_01310_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c199a5cf714d38f5afffc3c262df129f5d23ca27e1a302dd1684c8d23a0bf40e +size 18565 diff --git a/detail_png/Shaft_01311_diam.png b/detail_png/Shaft_01311_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2f2d4279a4e44efcb163c39aad5ba9acc22d83d5 --- /dev/null +++ b/detail_png/Shaft_01311_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5bd28750c6779abb364b1ec0369b4c0aeb6c259ba01b97f262b8133a03418792 +size 34963 diff --git a/detail_png/Shaft_01311_length.png b/detail_png/Shaft_01311_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5f59213f74f66c919a982f2bcb5366d9a0f73d3c --- /dev/null +++ b/detail_png/Shaft_01311_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19e29b4a45d2848c96fec3f12c2e697b1536991bec382a487f6262779a5afa23 +size 47708 diff --git a/detail_png/Shaft_01311_title.png b/detail_png/Shaft_01311_title.png new file mode 100644 index 0000000000000000000000000000000000000000..028648c802b21eea4faf822bf1df91bbc1d83134 --- /dev/null +++ b/detail_png/Shaft_01311_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ca274d8d5149ae0d50ef2096360b0712f8ff553d07e5f802dd5e537a3343b3f +size 30392 diff --git a/detail_png/Shaft_01314_diam.png b/detail_png/Shaft_01314_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..632087bade5a09875b069ab1506d7df1c87bcdaa --- /dev/null +++ b/detail_png/Shaft_01314_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9a6005fc70918bd03629f3692bb22b20cf198d26f67aa812a4e9d53e5f431bc +size 32070 diff --git a/detail_png/Shaft_01314_length.png b/detail_png/Shaft_01314_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bf32056d403d53dcbd235fdc983e34f58a61954a --- /dev/null +++ b/detail_png/Shaft_01314_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2068bfa78851fb2a0e1015266b2a7a679e28004480dc106288c16a293ccd1d62 +size 45415 diff --git a/detail_png/Shaft_01314_title.png b/detail_png/Shaft_01314_title.png new file mode 100644 index 0000000000000000000000000000000000000000..af304daca39c32b8dec897a4f9d7c75e981c1ba3 --- /dev/null +++ b/detail_png/Shaft_01314_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0666989f661d8256c80bacc47a57f0e0178e35b926f0a3f567379aa4c18b81ea +size 31069 diff --git a/detail_png/Shaft_01315_diam.png b/detail_png/Shaft_01315_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..891aa4de6c18691ef4bc87edc8dee1aedff55d83 --- /dev/null +++ b/detail_png/Shaft_01315_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f04e6f955a77f631a965d261fc56b492d490d5e34fbb34854f90bbebce6e7dc +size 25012 diff --git a/detail_png/Shaft_01315_length.png b/detail_png/Shaft_01315_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fc3e315c4748c7f1e4a79ec3504ae675ab41bf21 --- /dev/null +++ b/detail_png/Shaft_01315_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ee604496299a8569a116ae5661cfa24a9f6020d878f4aa6a0ce420a7c500cde +size 21566 diff --git a/detail_png/Shaft_01315_title.png b/detail_png/Shaft_01315_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6276f926e44f3bbe913b66e014547ef7618df357 --- /dev/null +++ b/detail_png/Shaft_01315_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c6a30e43bc95030fc9a7fedc49352962e3cba1cfc4163e536842d6d0ad84c5b +size 16599 diff --git a/detail_png/Shaft_01316_diam.png b/detail_png/Shaft_01316_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..85ef5b92cd0f345ea8f1e1e347feb0f865a99c3e --- /dev/null +++ b/detail_png/Shaft_01316_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e396f2218f10870a839e1db6fc97b30f9c64a89675835039b4a69546d945fd0 +size 28602 diff --git a/detail_png/Shaft_01316_length.png b/detail_png/Shaft_01316_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d949466c59f3fd9d22ea39c69e5a94f4f252f21 --- /dev/null +++ b/detail_png/Shaft_01316_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85cdb25348c55b4cab24a3a7b5358b64200b672721a0cc8c2e36956214c16250 +size 24076 diff --git a/detail_png/Shaft_01316_title.png b/detail_png/Shaft_01316_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2f9cf84155c0bf50ac14effc3c03e11fd84557e9 --- /dev/null +++ b/detail_png/Shaft_01316_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41327f9592c158408467837ee515ea14cccca465fc8076ec76b85165fd46a4ef +size 17123 diff --git a/detail_png/Shaft_01318_diam.png b/detail_png/Shaft_01318_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7aaad6205efd078b3cf12f4a4b2e24c9e29014c0 --- /dev/null +++ b/detail_png/Shaft_01318_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a2b3677faeb5cd6bbdbc38b182823d5bf421844fb39fae50f33fbefe397f56f +size 36714 diff --git a/detail_png/Shaft_01318_length.png b/detail_png/Shaft_01318_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fc2a1113592645b8f6f2c0edf66387f49c60298c --- /dev/null +++ b/detail_png/Shaft_01318_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e00841f763e07435509f89e6fc5eac3738a09d52ae7cf88016693051f5475cf1 +size 47097 diff --git a/detail_png/Shaft_01318_title.png b/detail_png/Shaft_01318_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2edf7545551ab789f730889ab4a07cb6f1da733 --- /dev/null +++ b/detail_png/Shaft_01318_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfddf20f53403ec85a57dcbb3ea23391476106101b790f7d431a759f3c70f46a +size 28836 diff --git a/detail_png/Shaft_01322_diam.png b/detail_png/Shaft_01322_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4a94f476d147fde118eeec07c8e138ccc02fbaf9 --- /dev/null +++ b/detail_png/Shaft_01322_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4162922d5bfeed632d439eedaacef32af7882fc4b1546860c3488901484fa229 +size 24474 diff --git a/detail_png/Shaft_01322_length.png b/detail_png/Shaft_01322_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ccc989ae034a83253c0a44af24e3e0fe1933a6b0 --- /dev/null +++ b/detail_png/Shaft_01322_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:381c23eda79c565af97c56b0731d47c22a36c0ff3fce174af45c068cb631e7ce +size 22854 diff --git a/detail_png/Shaft_01322_title.png b/detail_png/Shaft_01322_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0d42f1bf2bb0773938a81ab11f94799a986ef9c4 --- /dev/null +++ b/detail_png/Shaft_01322_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:533dc384f9a986dc7389e8865852ada547f22c181f90002778cf3fe74444a49d +size 29363 diff --git a/detail_png/Shaft_01325_diam.png b/detail_png/Shaft_01325_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..35e02421d86850b2dcf09db09ae4b3b6843813a0 --- /dev/null +++ b/detail_png/Shaft_01325_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3adc873f3b778a0f39fbafe06b5826bcdd5c32dceb2fd8e2b1096f2d2d7d1748 +size 36130 diff --git a/detail_png/Shaft_01325_length.png b/detail_png/Shaft_01325_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5cefc743f7d3bd2bb8082f7dee2a48b1d35f35bb --- /dev/null +++ b/detail_png/Shaft_01325_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58abb1eae8259cc646cce50555967998130b597c845955ca763100bf0978da60 +size 34807 diff --git a/detail_png/Shaft_01325_title.png b/detail_png/Shaft_01325_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aa634d2253296b5aa0ea9e9c6683a9a59b522742 --- /dev/null +++ b/detail_png/Shaft_01325_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0043c58f59c07d916d03cc034d10b208afb40cd2a9ece547d0b2562d254fb282 +size 30703 diff --git a/detail_png/Shaft_01327_diam.png b/detail_png/Shaft_01327_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..acf6f1b405b5e18ffaf74f3a7eb909d935001b79 --- /dev/null +++ b/detail_png/Shaft_01327_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b7dead0ec72a4e76bb160258115eb90c44501eb3b6f03900f904f07666b23f0 +size 33192 diff --git a/detail_png/Shaft_01327_length.png b/detail_png/Shaft_01327_length.png new file mode 100644 index 0000000000000000000000000000000000000000..127fc98622d99080d734efe8800d6e93f376f2a3 --- /dev/null +++ b/detail_png/Shaft_01327_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6bf82484ebc1ebd61e2163ad530c7ed70e5787c46fdb300f4c45866839c31b4 +size 48922 diff --git a/detail_png/Shaft_01327_title.png b/detail_png/Shaft_01327_title.png new file mode 100644 index 0000000000000000000000000000000000000000..146349e6d9bc08976db567debd94db1b2e0e24de --- /dev/null +++ b/detail_png/Shaft_01327_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89c4c09c93721fb2188a8a6ca0595afce40ebcb1db64398fd2e0f64acc68c889 +size 32085 diff --git a/detail_png/Shaft_01331_diam.png b/detail_png/Shaft_01331_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dfd0512e904cc758e1bcba631a8ee6d5353e05a0 --- /dev/null +++ b/detail_png/Shaft_01331_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8869054c3a64629610120c70b63b50039ade4a8acf372a431fe312df7677a557 +size 30678 diff --git a/detail_png/Shaft_01331_length.png b/detail_png/Shaft_01331_length.png new file mode 100644 index 0000000000000000000000000000000000000000..af75e5faf5f7299d8e54a823cf5386f1ad4887e3 --- /dev/null +++ b/detail_png/Shaft_01331_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db87da412a62828ae2df3945a18ac5638ba7e5f3c7125bdd1e3ac36fdcbb84de +size 24913 diff --git a/detail_png/Shaft_01331_title.png b/detail_png/Shaft_01331_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5a7d43e74d277fcfed5375a50d5aa310e28d3be6 --- /dev/null +++ b/detail_png/Shaft_01331_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:795403485b2df1df7249e176e57309a904dbd8407d656c3c590b0791b2de7165 +size 27940 diff --git a/detail_png/Shaft_01335_diam.png b/detail_png/Shaft_01335_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7d2969b14e47a6206072fd7f51f8a9f7fcf78d79 --- /dev/null +++ b/detail_png/Shaft_01335_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dccbaea13bea1d0caa695be262a445d36f7f2ae0e99ee36d3a52a8b85a685b01 +size 19745 diff --git a/detail_png/Shaft_01335_length.png b/detail_png/Shaft_01335_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9f05b82449f04475f8cc83a8044c937fa6487905 --- /dev/null +++ b/detail_png/Shaft_01335_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b438af83480ac4e92a73318b675311c3011df18749da01b2620ee48caaad72e +size 19005 diff --git a/detail_png/Shaft_01335_title.png b/detail_png/Shaft_01335_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3bda97d442a343db4f34062d5814153e0e09ab67 --- /dev/null +++ b/detail_png/Shaft_01335_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef935caf80564893d022ea7a64242681c08e19977c1a3f39ecf02b9b3a4fa80d +size 26101 diff --git a/detail_png/Shaft_01337_diam.png b/detail_png/Shaft_01337_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..105ffd77eb87e16098d5f4c934b89dab5b6318d0 --- /dev/null +++ b/detail_png/Shaft_01337_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94f6f8fede66ccfdeb07308a43d6cca848f8d174d8b5d3961949a5ee1a316da8 +size 25429 diff --git a/detail_png/Shaft_01337_length.png b/detail_png/Shaft_01337_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c2aff689cf9a63626d2038392bb6b740fe24807a --- /dev/null +++ b/detail_png/Shaft_01337_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f3a7de974e72eda1a8aa1fb33e12a4a7f157b498ccad8150d6dd9921f52d310 +size 18571 diff --git a/detail_png/Shaft_01337_title.png b/detail_png/Shaft_01337_title.png new file mode 100644 index 0000000000000000000000000000000000000000..35b7c6c363778ac34d2992f5ca3f0ed3a4b205f3 --- /dev/null +++ b/detail_png/Shaft_01337_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2682419bc52d75f9af8bef0d129765e380b8a7a0dc4660518e421fbee61bb611 +size 22165 diff --git a/detail_png/Shaft_01349_diam.png b/detail_png/Shaft_01349_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a3a20763af862cd6b639627b4b303b3679932e3b --- /dev/null +++ b/detail_png/Shaft_01349_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94b8cdd5a222060c67a1dea4460bae70c88b75778de34e0c3b4471324cc07ca0 +size 19532 diff --git a/detail_png/Shaft_01349_length.png b/detail_png/Shaft_01349_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77ef95cda5f30474dddefa62a732c89d279ab502 --- /dev/null +++ b/detail_png/Shaft_01349_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcf3f4354c2c461269e9f1addceba65177820e45fd18ca9699a049a5c94d1a2a +size 18881 diff --git a/detail_png/Shaft_01349_title.png b/detail_png/Shaft_01349_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e596e300a031b8870f9e9c45ad05ad18721f8408 --- /dev/null +++ b/detail_png/Shaft_01349_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:579b1aacb37e0de9d90cca4aa0424bffc0f2d7407cc79dd8b12a9c8ff1980632 +size 30398 diff --git a/detail_png/Shaft_01355_diam.png b/detail_png/Shaft_01355_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8956493b356ff9b42fa70838c80db2b7ac7a102a --- /dev/null +++ b/detail_png/Shaft_01355_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c51319cfa333517d82991ab15abb0cc8e80abaadaa1f0f7889d80c8eda9b4e8 +size 29366 diff --git a/detail_png/Shaft_01355_length.png b/detail_png/Shaft_01355_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ccff164f14400244c357f3a839d1937fcb3f5811 --- /dev/null +++ b/detail_png/Shaft_01355_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f6cb1c279fbf35771193a47df0d681feb689627fc62fd07a1124908f3164933 +size 24021 diff --git a/detail_png/Shaft_01355_title.png b/detail_png/Shaft_01355_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f8aefe18a07e7a42f6bec1e230977fbae66f5591 --- /dev/null +++ b/detail_png/Shaft_01355_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef15b974b3ff84ab5f76ad5854aa8ae3131c528c0e7e70540548bdc12452402 +size 24280 diff --git a/detail_png/Shaft_01356_diam.png b/detail_png/Shaft_01356_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..07c25886274afc80b9ebc6763e4d06a6876571ed --- /dev/null +++ b/detail_png/Shaft_01356_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:045a489c8e377330bd1d41eaea594e10a86669feee298fae7ca1ed71893c84d7 +size 25539 diff --git a/detail_png/Shaft_01356_length.png b/detail_png/Shaft_01356_length.png new file mode 100644 index 0000000000000000000000000000000000000000..628420f33aef0477525b0429ded8ec32e46bf4ad --- /dev/null +++ b/detail_png/Shaft_01356_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a53f006704a6f3291d74cba7076b30d7e90275bd6a4a6eb86838ed213ca1bc4 +size 19714 diff --git a/detail_png/Shaft_01356_title.png b/detail_png/Shaft_01356_title.png new file mode 100644 index 0000000000000000000000000000000000000000..85b5b17bfc77a118866e1ff2f6ad84c59faf3dde --- /dev/null +++ b/detail_png/Shaft_01356_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed0d79cc4a5a1df89d8ec7c97938b608d52dbaf79ab486ab1f577f1bbd261698 +size 17356 diff --git a/detail_png/Shaft_01360_diam.png b/detail_png/Shaft_01360_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f23b564b159b82ba505d29a9c254067062825b11 --- /dev/null +++ b/detail_png/Shaft_01360_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60eb01a3e9a7c542d27aa7ee6822c50d074d6be63ab1138ac209a7afcdaba94b +size 20406 diff --git a/detail_png/Shaft_01360_length.png b/detail_png/Shaft_01360_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0cb4545b486bcb4aadd9e35d614bc75f2f6250cd --- /dev/null +++ b/detail_png/Shaft_01360_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6a432924736a6cf12cdb5f59262671386900f15cf2cd3f11b525e0fb6925deb +size 17128 diff --git a/detail_png/Shaft_01360_title.png b/detail_png/Shaft_01360_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d030c3029e27f8377bb72238339ad8d623ef62e7 --- /dev/null +++ b/detail_png/Shaft_01360_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6b59b056a5f5eb6df8a754fe3d62aca55bc8d724e0baed06b7a54181227bce7 +size 15739 diff --git a/detail_png/Shaft_01363_diam.png b/detail_png/Shaft_01363_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..93360424e27a329c45eccd1383160bc59c430ebd --- /dev/null +++ b/detail_png/Shaft_01363_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ff6e7dc4848325e341e0801f5c4079f0368310d3a175ef878f59e1d62fb074a +size 43728 diff --git a/detail_png/Shaft_01363_length.png b/detail_png/Shaft_01363_length.png new file mode 100644 index 0000000000000000000000000000000000000000..672e0ad63a1490c4ad0189eaf82d990862bef23a --- /dev/null +++ b/detail_png/Shaft_01363_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0a78bbff0156c72b80567cb5e9a57adeb63e666cb5453fe9bb201c1c5f779a7 +size 63665 diff --git a/detail_png/Shaft_01363_title.png b/detail_png/Shaft_01363_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fd70acdbb36c8bc34f75506ad591937c55b66b12 --- /dev/null +++ b/detail_png/Shaft_01363_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b1b3c5d1a932303fe02813311b092cd13ad4d0a4b61313d2b2c5de8e96d33ec +size 37094 diff --git a/detail_png/Shaft_01365_diam.png b/detail_png/Shaft_01365_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eb1a1fdf9268fe70f8a6f9e38e03004cab97f342 --- /dev/null +++ b/detail_png/Shaft_01365_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8a076c16b69ff277d91a2c1b3bb50a0b016be86e18b24d574540a3c9fc70e4c +size 26590 diff --git a/detail_png/Shaft_01365_length.png b/detail_png/Shaft_01365_length.png new file mode 100644 index 0000000000000000000000000000000000000000..524bf1dbfbb4cbe04b28e13dafce3f31d20adc41 --- /dev/null +++ b/detail_png/Shaft_01365_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8496502c76676203bfc31308e5239db6f200c75be8dfacd90befdd03c61a635f +size 38998 diff --git a/detail_png/Shaft_01365_title.png b/detail_png/Shaft_01365_title.png new file mode 100644 index 0000000000000000000000000000000000000000..000405f2576960c39bbde06f882a6d9e77cc25f9 --- /dev/null +++ b/detail_png/Shaft_01365_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8405ce667b77e66b0409e35204a71ba33724bf78068a7c926d2d7778568c56a3 +size 32522 diff --git a/detail_png/Shaft_01367_diam.png b/detail_png/Shaft_01367_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0b2761236d9b0aa5977daed954601f60edcdc194 --- /dev/null +++ b/detail_png/Shaft_01367_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cbbee888dc4dbaf837d531aece30bee71c3541bd02d4f949702bfc64fa7ab51 +size 19865 diff --git a/detail_png/Shaft_01367_length.png b/detail_png/Shaft_01367_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8e4b3864b4f62b7b7b6702d454d29235942cd55f --- /dev/null +++ b/detail_png/Shaft_01367_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a829da42c634f61581bfc55a88199d3a94ec49375b72a965abcbcc0050128e05 +size 23772 diff --git a/detail_png/Shaft_01367_title.png b/detail_png/Shaft_01367_title.png new file mode 100644 index 0000000000000000000000000000000000000000..81a1bfb1e53f315340e071b44e6338b49fa6af15 --- /dev/null +++ b/detail_png/Shaft_01367_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5750eb3659aff6066cb14e1eba5326cb17c2b1b918735e51e427510666a470d +size 29526 diff --git a/detail_png/Shaft_01370_diam.png b/detail_png/Shaft_01370_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..499c2ec2329918e9a10e5a70caf9e49b23cd8854 --- /dev/null +++ b/detail_png/Shaft_01370_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:087eae9c0c6de0c5aa2981a82bc9b7973b213034f8a9726ed6a2e16cc0b96fee +size 24973 diff --git a/detail_png/Shaft_01370_length.png b/detail_png/Shaft_01370_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bf679acabd32d43ba48cd6da9249608b46acde31 --- /dev/null +++ b/detail_png/Shaft_01370_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7268a90a6a047150cb5a2c18cb923a0ea658bb94792148b3b6d8ff1926dc98c +size 35560 diff --git a/detail_png/Shaft_01370_title.png b/detail_png/Shaft_01370_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a51365ff54d510f6539aa3766d063d938f1af4bd --- /dev/null +++ b/detail_png/Shaft_01370_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abf02d8dbbf5459cfa5cf590fbda50c8bf60ae673c86a7c31aa04eee227e6bbf +size 31796 diff --git a/detail_png/Shaft_01373_diam.png b/detail_png/Shaft_01373_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3bb6a5969b9a75a169a03ce7c83c8e9587fa347f --- /dev/null +++ b/detail_png/Shaft_01373_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5232d3083062fde39a0c7bf3ae92d7be2da2059eef0f474e2cdffa2ea512fa38 +size 26086 diff --git a/detail_png/Shaft_01373_length.png b/detail_png/Shaft_01373_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cfe9df29a64902004389feab871bc1639708164d --- /dev/null +++ b/detail_png/Shaft_01373_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ad942f35aa5a5724775cc2ceb197164d26410c3d3bc0f27cbd8a025f44e6bd4 +size 30745 diff --git a/detail_png/Shaft_01373_title.png b/detail_png/Shaft_01373_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4b939b9c46f1ea0d5a06134642f33b2caa193150 --- /dev/null +++ b/detail_png/Shaft_01373_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a5fb4c70d3add095caada3e91219ed236c9e0d6c37d016b1e0097cf92e66709 +size 28565 diff --git a/detail_png/Shaft_01374_diam.png b/detail_png/Shaft_01374_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..33cf7cf48fb6ce734d9466263458c8adc0c3c28d --- /dev/null +++ b/detail_png/Shaft_01374_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e01bb29fec8d24d15d6ab6f771a8d42850b69e64a5615e4657ef34034f83d223 +size 20184 diff --git a/detail_png/Shaft_01374_length.png b/detail_png/Shaft_01374_length.png new file mode 100644 index 0000000000000000000000000000000000000000..142ff922737e99fcf08565629b216656686c3771 --- /dev/null +++ b/detail_png/Shaft_01374_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af183b7a0618f7b317171632223cae93c1169bb0218e87a0734b40094fc10af6 +size 14496 diff --git a/detail_png/Shaft_01374_title.png b/detail_png/Shaft_01374_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8314ff561f1cb0381071732436c90b5044ed0ccf --- /dev/null +++ b/detail_png/Shaft_01374_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2baed1c46f20f7e6c84bfc4e84874e9c12b2e37928b6fe041dbf54ae0672417 +size 17565 diff --git a/detail_png/Shaft_01376_diam.png b/detail_png/Shaft_01376_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..34c933e86e1b5f11054b22c25d67d51e944ece6d --- /dev/null +++ b/detail_png/Shaft_01376_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c5d6ee094b4a987ca7728be0c290f72ea93bc4180e026a6c41de50777d6f1eb +size 18997 diff --git a/detail_png/Shaft_01376_length.png b/detail_png/Shaft_01376_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6c8bbcced11e964099c29396ce7fd78e3c5b50af --- /dev/null +++ b/detail_png/Shaft_01376_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd94c8afad96573cb51d32b5905ea212037d4a3e86edaffb9c2cb38c8d24461d +size 14622 diff --git a/detail_png/Shaft_01376_title.png b/detail_png/Shaft_01376_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c521e2c437bd0d790593ca28222af5a7587749d --- /dev/null +++ b/detail_png/Shaft_01376_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd856b93a2965dab227cb2ab55222c3895eb5a2fa0b4f627038e8e3213b7063b +size 20109 diff --git a/detail_png/Shaft_01379_diam.png b/detail_png/Shaft_01379_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5a02515f6dd0644bf479d666bded361e40f797ec --- /dev/null +++ b/detail_png/Shaft_01379_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04d8882f14f77fddf55cb556d232d058c1f4c52d9756ae8b9223726bd8212f48 +size 23923 diff --git a/detail_png/Shaft_01379_length.png b/detail_png/Shaft_01379_length.png new file mode 100644 index 0000000000000000000000000000000000000000..242c2b04dceffb3de23343df1af471df4c41c4a5 --- /dev/null +++ b/detail_png/Shaft_01379_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8793874a287829e955f02e1d4426c33c99abcec45a97a7529cef040d2a5d67e7 +size 18496 diff --git a/detail_png/Shaft_01379_title.png b/detail_png/Shaft_01379_title.png new file mode 100644 index 0000000000000000000000000000000000000000..438531a456b294dfaf7989b988778de9a7e6b9b4 --- /dev/null +++ b/detail_png/Shaft_01379_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd4d7839319f57486bd5ed0bf43160819d518fe0e45d10b6a5f4c1f6492476de +size 18817 diff --git a/detail_png/Shaft_01384_diam.png b/detail_png/Shaft_01384_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ebe20961e637ddcb1bf6e225d16a926297167929 --- /dev/null +++ b/detail_png/Shaft_01384_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d53f089b7d0b7651dbac74a72c45fe5bab7cbf8fcefec148cfca83c8f9f8ad9 +size 25960 diff --git a/detail_png/Shaft_01384_length.png b/detail_png/Shaft_01384_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3296441b592c91860d78a20ee38266f1d9ab502d --- /dev/null +++ b/detail_png/Shaft_01384_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4730ab9fb8045854a70c787b2726dd0f1b16b81a259143ae7fbf08d54c335a3 +size 33531 diff --git a/detail_png/Shaft_01384_title.png b/detail_png/Shaft_01384_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9ca6ad1dc354fe607f0c8815f65f6a5412716535 --- /dev/null +++ b/detail_png/Shaft_01384_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00c7c01cf4075eb9485294c0f56ea7303ee79f5e7d45ec3c16891849558bb7b0 +size 32052 diff --git a/detail_png/Shaft_01385_diam.png b/detail_png/Shaft_01385_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..639650801efe94c68063152e914fe57e8d530a1e --- /dev/null +++ b/detail_png/Shaft_01385_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6daebba0d160da34cf002e4bfc89321f584d0c7a44c1068a2065ced7191dbb3a +size 31826 diff --git a/detail_png/Shaft_01385_length.png b/detail_png/Shaft_01385_length.png new file mode 100644 index 0000000000000000000000000000000000000000..512e529c6ee0b1da585712d4a5aa62a433855334 --- /dev/null +++ b/detail_png/Shaft_01385_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17a2a188c34a5a9572b751f0d1ab7724946928736a75e28b8c40b4761268b085 +size 40021 diff --git a/detail_png/Shaft_01385_title.png b/detail_png/Shaft_01385_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bb24b939a547260307a02f5601bdeae37e33f1b2 --- /dev/null +++ b/detail_png/Shaft_01385_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c285105bcdb74b52a1499d307dd0ce0f4548d60dffc26da2786a051716317b8f +size 35963 diff --git a/detail_png/Shaft_01388_diam.png b/detail_png/Shaft_01388_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9fb70b4f8a34e6b42428d12436aee50fc349bf18 --- /dev/null +++ b/detail_png/Shaft_01388_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f5d37506cc176b3d8e1bfc23bec55568e7c76a94a4fa9cc0511d6bcf4db9d62 +size 27602 diff --git a/detail_png/Shaft_01388_length.png b/detail_png/Shaft_01388_length.png new file mode 100644 index 0000000000000000000000000000000000000000..221e9d1d7b32becd4ab10b27e034a460652ce1cd --- /dev/null +++ b/detail_png/Shaft_01388_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edc84f13590e7b828c4f11f842e2ffe14d2264e6ead1398c222612a16891d5d5 +size 23544 diff --git a/detail_png/Shaft_01388_title.png b/detail_png/Shaft_01388_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2d463d3a97a3e9d33b3d69e48b9f43aad9a805dd --- /dev/null +++ b/detail_png/Shaft_01388_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf2fbf2fb6e9dc09ea3dfacd107898997ee35c51cfbcbe307d9261ee56940ac2 +size 18779 diff --git a/detail_png/Shaft_01391_diam.png b/detail_png/Shaft_01391_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b079eafcd2a1a589fd8531ec7405a8e1eab9d13a --- /dev/null +++ b/detail_png/Shaft_01391_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:460fcecf9104f3fa997ea3696078554700ac04ba253e77b2337af9bb58e8bc00 +size 26886 diff --git a/detail_png/Shaft_01391_length.png b/detail_png/Shaft_01391_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d4cd8bf480e41a8fa265b79893764279e4a6e128 --- /dev/null +++ b/detail_png/Shaft_01391_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc775195ab2326546bf4eb175716aec2d17407f0aab08477682d1bd2eccb2c71 +size 20737 diff --git a/detail_png/Shaft_01391_title.png b/detail_png/Shaft_01391_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0af99fc1b0d8957398c88fe729bfeacd83680ff2 --- /dev/null +++ b/detail_png/Shaft_01391_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23ec8ea5f9974496c04df7041d83cd73bdb644bea976143b17f3aba75c899a1f +size 24652 diff --git a/detail_png/Shaft_01392_diam.png b/detail_png/Shaft_01392_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e5087bf595190a09ea8a254dcd52ab6a57d33d70 --- /dev/null +++ b/detail_png/Shaft_01392_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:655f3059d57941eac412914415493917fc0396204d1f9eee65a36d343bf045d8 +size 24395 diff --git a/detail_png/Shaft_01392_length.png b/detail_png/Shaft_01392_length.png new file mode 100644 index 0000000000000000000000000000000000000000..27dc1949db4b5790756a634fbd129d5fe7934202 --- /dev/null +++ b/detail_png/Shaft_01392_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b55d6e2a7ac22429fa7f2ed53eb369a82b2ff4fa779581f655201f81b525519e +size 22072 diff --git a/detail_png/Shaft_01392_title.png b/detail_png/Shaft_01392_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ea0bb1d7b1c07e2ecb8790c985c0931d187d523f --- /dev/null +++ b/detail_png/Shaft_01392_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49d45054f790896351f1f03607d9649fcb52e938eee060c2976371a76f8131b2 +size 26609 diff --git a/detail_png/Shaft_01393_diam.png b/detail_png/Shaft_01393_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..526040d2d58d85786bd76172a8d82ea71abeb94b --- /dev/null +++ b/detail_png/Shaft_01393_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af106165dc30892c18197883e522dab486580a43011f1e7624f0d220c571b1fc +size 19647 diff --git a/detail_png/Shaft_01393_length.png b/detail_png/Shaft_01393_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d7061b561f28dc6a7901dce6831367f26af77020 --- /dev/null +++ b/detail_png/Shaft_01393_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f25c2320410ccf0a624bc43db69c989d72a2e07bb33070d83ef4acd01754f2bc +size 16349 diff --git a/detail_png/Shaft_01393_title.png b/detail_png/Shaft_01393_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7a84fb977a0a443873d923901a6bf0d54b1125bf --- /dev/null +++ b/detail_png/Shaft_01393_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b8d8e84e33b65e8e379861ac692aeba6e9c75f08e70e8483da6607caccf438b +size 13224 diff --git a/detail_png/Shaft_01398_diam.png b/detail_png/Shaft_01398_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b845a7a4801398d66dab71849cbe9365844f7b58 --- /dev/null +++ b/detail_png/Shaft_01398_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:649364cb55cf3a03d91d6ada76e17ff883ac528f4976679f6aad23590b9e3c86 +size 20036 diff --git a/detail_png/Shaft_01398_length.png b/detail_png/Shaft_01398_length.png new file mode 100644 index 0000000000000000000000000000000000000000..28cdd953a05f8209c22cd70e574e8606fb86aa0b --- /dev/null +++ b/detail_png/Shaft_01398_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e91cf196ab08345bb8948d5f950eb6465af026a2452b04ba6926991318d2c98f +size 19596 diff --git a/detail_png/Shaft_01398_title.png b/detail_png/Shaft_01398_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0416cb2e74538b95cc51b240437c76d9a9c14238 --- /dev/null +++ b/detail_png/Shaft_01398_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e04521e38d68950577f57ba9e45dfc7d9d9794707f6fce1baeed50e2b74c195 +size 26067 diff --git a/detail_png/Shaft_01399_diam.png b/detail_png/Shaft_01399_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dd1cd13240a0990c14d33097c38cc2373cfc51fd --- /dev/null +++ b/detail_png/Shaft_01399_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47af9c3560afba18089d58fbe9d4ec5cb885c64a4561a4f96e07b36a2b426468 +size 20191 diff --git a/detail_png/Shaft_01399_length.png b/detail_png/Shaft_01399_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f2ae42d1735b248244c1b29b2a97492d6b2d3543 --- /dev/null +++ b/detail_png/Shaft_01399_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39d093f6e9ccf101fb66412c1336ede5265bccb373a057d2f8895529ee234ed4 +size 16772 diff --git a/detail_png/Shaft_01399_title.png b/detail_png/Shaft_01399_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42b758248d0e7e3c93f6cc4b30d99f4b410a73b0 --- /dev/null +++ b/detail_png/Shaft_01399_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:435a1fe10d324d76460a7a51d98a27f565443230e7e9c736c15bf58d436efb90 +size 22708 diff --git a/detail_png/Shaft_01401_diam.png b/detail_png/Shaft_01401_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e07fafccb366a4949bbf5f9703f14c6bdb4c9323 --- /dev/null +++ b/detail_png/Shaft_01401_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c947c2d413e92d5ae2819e849f4d50177bdb38fc9331637192c7cf955e80b5d4 +size 32326 diff --git a/detail_png/Shaft_01401_length.png b/detail_png/Shaft_01401_length.png new file mode 100644 index 0000000000000000000000000000000000000000..797ceb35d465d444b7637e41602a0ecd40c4e77c --- /dev/null +++ b/detail_png/Shaft_01401_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a870fcd2a0a6e2ee090a79796db1533055c8bd29ac0625d28b1f49b1a0ff0460 +size 41723 diff --git a/detail_png/Shaft_01401_title.png b/detail_png/Shaft_01401_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5f46ffdace23c9ce9e04f944b97b8fe108d23992 --- /dev/null +++ b/detail_png/Shaft_01401_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94529fa5f2808d79deb451af7c2cae33e17cf40b241f0808f10fcb512087ad42 +size 30487 diff --git a/detail_png/Shaft_01405_diam.png b/detail_png/Shaft_01405_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d49434cd352ee08a68ee90282f1f502effb9cc80 --- /dev/null +++ b/detail_png/Shaft_01405_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:408505e219eb11691d3fdea2602b2d3bbe21fe2b796c03a445970b28bf2d58b6 +size 19636 diff --git a/detail_png/Shaft_01405_length.png b/detail_png/Shaft_01405_length.png new file mode 100644 index 0000000000000000000000000000000000000000..799ae6a33831306173a600c9ee55a89ebdaae7b5 --- /dev/null +++ b/detail_png/Shaft_01405_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:211da3de2bb8c8f20bdc1669dd80ddaa738ffd66d7f0e897c824f7e4d9efbf34 +size 15724 diff --git a/detail_png/Shaft_01405_title.png b/detail_png/Shaft_01405_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1e1f0598d75c35f5d54b16cf6b13645094e4dac3 --- /dev/null +++ b/detail_png/Shaft_01405_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb8ab97bc1cc8b4dccadc1c427524210190754aaed65a2c06a1da5179e2f28eb +size 20443 diff --git a/detail_png/Shaft_01408_diam.png b/detail_png/Shaft_01408_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4aae2e4f083f6d0af38850684901bff4f94a9625 --- /dev/null +++ b/detail_png/Shaft_01408_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60836bb03d8cf87178bcb934299d99f28578f51358d9e6567df7214c6625f6fc +size 25677 diff --git a/detail_png/Shaft_01408_length.png b/detail_png/Shaft_01408_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ed8bcc3431e4af4b4568dc49574a996a71351acf --- /dev/null +++ b/detail_png/Shaft_01408_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4417c3814f3c8f6929b57f6e842eac31d69fbf06e8a30a5ad1d3bd769d835e7a +size 37536 diff --git a/detail_png/Shaft_01408_title.png b/detail_png/Shaft_01408_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dfb33e4abc52cda44ab0c505cf722277e0d03582 --- /dev/null +++ b/detail_png/Shaft_01408_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60e79d23d708c2b51bd1fec4428f43ab3ebf89420eec0dded7d24820ad0ed8e1 +size 32109 diff --git a/detail_png/Shaft_01410_diam.png b/detail_png/Shaft_01410_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..64560ae458e0cbe71e8be5225db198eeac401f77 --- /dev/null +++ b/detail_png/Shaft_01410_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9d7774fdec5f302a80ae3cd64939b3ab89395b48fb9d2de473e22c26d171f4f +size 19575 diff --git a/detail_png/Shaft_01410_length.png b/detail_png/Shaft_01410_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bfac4ce0f2991c0de21708040e81ac0da39f43a2 --- /dev/null +++ b/detail_png/Shaft_01410_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bca05fd5fae9324ed61d7671186475a9271e8ef0126b634bf040b56a9770081b +size 14722 diff --git a/detail_png/Shaft_01410_title.png b/detail_png/Shaft_01410_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f4c7b3a8a45c19cd618b3c9bc11196736ca70e1f --- /dev/null +++ b/detail_png/Shaft_01410_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9303a154c5a486b3a5d1d259b8e45295656fa29c68b108b6eea84ab0f1ee92f8 +size 14555 diff --git a/detail_png/Shaft_01411_diam.png b/detail_png/Shaft_01411_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..426b68c8702cf6efa03726f958a15943304b94c6 --- /dev/null +++ b/detail_png/Shaft_01411_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d20689cfd3561f8e51deaf416c867460896644102b05a4b36eb8b103d1a06528 +size 26408 diff --git a/detail_png/Shaft_01411_length.png b/detail_png/Shaft_01411_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a7401a4a605fa3fa7567278f7b3de141300e01d0 --- /dev/null +++ b/detail_png/Shaft_01411_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40d422d8f46d77d37b0e74f9319f28730687d22ca6293b58175406434eab60c2 +size 22469 diff --git a/detail_png/Shaft_01411_title.png b/detail_png/Shaft_01411_title.png new file mode 100644 index 0000000000000000000000000000000000000000..790fd0b9c8d4dcd55222ec269fe196813bec1558 --- /dev/null +++ b/detail_png/Shaft_01411_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ef7bd7e8bf3311467aa0c157bab85b2a2afb3d83dd79ca5cfd375e24167ee88 +size 22235 diff --git a/detail_png/Shaft_01414_diam.png b/detail_png/Shaft_01414_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e29ee40b9bc2801f2e69c14c34245247f9de8e0d --- /dev/null +++ b/detail_png/Shaft_01414_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4976bb26e0d6d2e6a21b56104bee95846302085b4b04898ea871f3f9ba70059c +size 26345 diff --git a/detail_png/Shaft_01414_length.png b/detail_png/Shaft_01414_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d7e6352a889fcfc090c77c9d29cfbf945e3e2bbb --- /dev/null +++ b/detail_png/Shaft_01414_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7498a5c0c88ccffa7f363800a7d2ba166e30d13baf01e53a516373413dad59c4 +size 38399 diff --git a/detail_png/Shaft_01414_title.png b/detail_png/Shaft_01414_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e89c1d2facb5122ba0fe85a9371e993b1cb54e33 --- /dev/null +++ b/detail_png/Shaft_01414_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a43134f5a2da983e7834ef3baab010713a41d86f6067dab7f64256555302d376 +size 33258 diff --git a/detail_png/Shaft_01417_diam.png b/detail_png/Shaft_01417_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dde537da07f7e3648e64b5187ff76a371342c55a --- /dev/null +++ b/detail_png/Shaft_01417_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9047b7e2d0bfc8f80fc6c46d655a6f673bc4697aa364e724f611c112aabac4a5 +size 30857 diff --git a/detail_png/Shaft_01417_length.png b/detail_png/Shaft_01417_length.png new file mode 100644 index 0000000000000000000000000000000000000000..17c5f32a6e578281ccbb5b0503e19762f55360ed --- /dev/null +++ b/detail_png/Shaft_01417_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b46db503c2e7ea1feb1c53f792fe4aed9732b6143825d94f596be5b73e60fd23 +size 42834 diff --git a/detail_png/Shaft_01417_title.png b/detail_png/Shaft_01417_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8fd8812f379f45ae1262eae6f50495217e414983 --- /dev/null +++ b/detail_png/Shaft_01417_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1e85f686678960c84d964e64d6ca0acbd638d118dee2b90742af79a2fc4dff4 +size 33525 diff --git a/detail_png/Shaft_01419_diam.png b/detail_png/Shaft_01419_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..893e717a374787bb39ef1fcce0f5c12cfd5fd39d --- /dev/null +++ b/detail_png/Shaft_01419_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5988c808c6d7f19ac4500f587a7ca6eb061ac17342a24142853184269f019ce8 +size 18334 diff --git a/detail_png/Shaft_01419_length.png b/detail_png/Shaft_01419_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b34c3937ad70fe82fe37ecf92736e4d716d7cef8 --- /dev/null +++ b/detail_png/Shaft_01419_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a68534e221ed9da663730585920e5a9c67ebe891dc839a1134f7d381c13fefa +size 17128 diff --git a/detail_png/Shaft_01419_title.png b/detail_png/Shaft_01419_title.png new file mode 100644 index 0000000000000000000000000000000000000000..485950e585b4d213261ff524534616f865ea4efa --- /dev/null +++ b/detail_png/Shaft_01419_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8eb10cd714a9aa9cfae09843fff0b11b87e5e957b468838afa860ed2afc93139 +size 25794 diff --git a/detail_png/Shaft_01428_diam.png b/detail_png/Shaft_01428_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b5952c8af93a35c8a3555e48e3cb3fbb0a45821c --- /dev/null +++ b/detail_png/Shaft_01428_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:799cddbcc3412ab88fd34e7081e12ef0e70c6b7fd860135d04668b14d906c88e +size 36802 diff --git a/detail_png/Shaft_01428_length.png b/detail_png/Shaft_01428_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c682f000d7ad2238551850175fe72d946f5508e4 --- /dev/null +++ b/detail_png/Shaft_01428_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b65e0ba37ff0012a5f04fd4a570aced8efaa19e70fff04b4ccf1c13b12e96777 +size 46717 diff --git a/detail_png/Shaft_01428_title.png b/detail_png/Shaft_01428_title.png new file mode 100644 index 0000000000000000000000000000000000000000..087e8eb7af6c2f2bc68933e978dff31d702644f3 --- /dev/null +++ b/detail_png/Shaft_01428_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfb1b2b49b6a7c20be61098e47d4b4a263e1427c57978ce210b03a9250c65edf +size 29654 diff --git a/detail_png/Shaft_01429_diam.png b/detail_png/Shaft_01429_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..47f547c83af42bf8f7e170580bea61f6739d6f3b --- /dev/null +++ b/detail_png/Shaft_01429_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6162e990ee324c91d9f1d47d36f4cb3fe70e771fa9ff712305a76744e599ea7c +size 26158 diff --git a/detail_png/Shaft_01429_length.png b/detail_png/Shaft_01429_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f3cf0b3a87e12b1935334471abcb455ff8483281 --- /dev/null +++ b/detail_png/Shaft_01429_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5b4c9b9adb875ac621b1cfd6604790bff18622036f269b65944b9ac8f22020a +size 32314 diff --git a/detail_png/Shaft_01429_title.png b/detail_png/Shaft_01429_title.png new file mode 100644 index 0000000000000000000000000000000000000000..32a3d92a93eefa39e468cbb290b22e50cb45b023 --- /dev/null +++ b/detail_png/Shaft_01429_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a5b0c059889bb4b99b0e0db5144e4bad6db0c533213477b682684661aa08f72 +size 31709 diff --git a/detail_png/Shaft_01437_diam.png b/detail_png/Shaft_01437_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ab0fd8646eed826449a41ff840ee0a6f450720ec --- /dev/null +++ b/detail_png/Shaft_01437_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df7b5b3179248e9be242763bc34ac8cb4a4bd88a5ee3cf2d7ac96cc86825dbe4 +size 39774 diff --git a/detail_png/Shaft_01437_length.png b/detail_png/Shaft_01437_length.png new file mode 100644 index 0000000000000000000000000000000000000000..454ebf49b2f7ec723b2649f4abda2616d4cd0aff --- /dev/null +++ b/detail_png/Shaft_01437_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75f9bf7472925fbcd1b16d06f3f6d1b17c9fc953fa7bd9dc558a194418b3dc72 +size 37693 diff --git a/detail_png/Shaft_01437_title.png b/detail_png/Shaft_01437_title.png new file mode 100644 index 0000000000000000000000000000000000000000..15c52577fb18864f18a2234388fb32bd9b9a5bbb --- /dev/null +++ b/detail_png/Shaft_01437_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dd55d847f4f0402290279b41c657e633f8649ede2382886e4d5fbf0a1c478fd +size 30640 diff --git a/detail_png/Shaft_01440_diam.png b/detail_png/Shaft_01440_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8792ce67119c31443939d363a0ea9153fb63000 --- /dev/null +++ b/detail_png/Shaft_01440_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89fa4aa823e3035ffe8e8b4e57959e3fbd2695a420a6bf4af1db89521eaf80c7 +size 23870 diff --git a/detail_png/Shaft_01440_length.png b/detail_png/Shaft_01440_length.png new file mode 100644 index 0000000000000000000000000000000000000000..518ad5c9ccc26bdfeec25fa0ddd7f6ef952f71cf --- /dev/null +++ b/detail_png/Shaft_01440_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bd0d1f3e9db475acbf5d550149412de289764c8c2763bd7cac168f0a9b0a9d5 +size 34559 diff --git a/detail_png/Shaft_01440_title.png b/detail_png/Shaft_01440_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cd244530920d3ce0dded5b8f6ec4373cb21a3ec6 --- /dev/null +++ b/detail_png/Shaft_01440_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c1afe53d4c4c5b8bdfd00b2556d646cef4d7301d46422d1bbeb5db1e9550024 +size 28698 diff --git a/detail_png/Shaft_01446_diam.png b/detail_png/Shaft_01446_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..74cfa2d62ac044e24c7e584d798f6ff9beeb6546 --- /dev/null +++ b/detail_png/Shaft_01446_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:513969aee4201f6bb220c9a83929bdd545c3d8a5e63a5d8710b10ad3b97b104b +size 34413 diff --git a/detail_png/Shaft_01446_length.png b/detail_png/Shaft_01446_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1f6fdda71ae7a45a3031705fa1e54c2e74aae49f --- /dev/null +++ b/detail_png/Shaft_01446_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9569953eb56c56f7ab66ac960550e60b9b151726e541102eea393c86766f5d23 +size 51040 diff --git a/detail_png/Shaft_01446_title.png b/detail_png/Shaft_01446_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1c24bbd2a53575b0195e5d615e6ed6fe4bc5a37e --- /dev/null +++ b/detail_png/Shaft_01446_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ed24e15dc366b96622b21de096336743c0772dafec9e8b7df4c81d772a40c60 +size 34874 diff --git a/detail_png/Shaft_01449_diam.png b/detail_png/Shaft_01449_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..506d2d4c02897c735ad88f5739ed9f60f84d07c8 --- /dev/null +++ b/detail_png/Shaft_01449_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:850626ef72b240c90190d7bd57e48cf85be9191a85a898f7aecea6f9589e85eb +size 24420 diff --git a/detail_png/Shaft_01449_length.png b/detail_png/Shaft_01449_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c82a49637604b181a178dd57f4bd85b6798beb2b --- /dev/null +++ b/detail_png/Shaft_01449_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22548b9e3f58251f7a620bb0d63a5568f707a15b5831f009833c00262dab8c06 +size 22412 diff --git a/detail_png/Shaft_01449_title.png b/detail_png/Shaft_01449_title.png new file mode 100644 index 0000000000000000000000000000000000000000..667693cd32e14d392347a181ebdcf304e27d8924 --- /dev/null +++ b/detail_png/Shaft_01449_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d343268818728e3d346f5e436477669593246fc631f52f181416e3b62f07e91c +size 23590 diff --git a/detail_png/Shaft_01450_diam.png b/detail_png/Shaft_01450_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e060a532064a5d579ed450a57930c88402bfd25b --- /dev/null +++ b/detail_png/Shaft_01450_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b899bdeaf5362c6c946ceb4f76c20fe5bd373f16e9f6455a89dd9d90b1641fe5 +size 31060 diff --git a/detail_png/Shaft_01450_length.png b/detail_png/Shaft_01450_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8fc5595f441c342aceb396c44c6dc0e0b2a0bf36 --- /dev/null +++ b/detail_png/Shaft_01450_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d13d053193c5b74fedf23f1fe99a2070b19de359b72d59854a2328c6e6aa918 +size 33361 diff --git a/detail_png/Shaft_01450_title.png b/detail_png/Shaft_01450_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cbeca9ed6443d53baa2c16b55f74d91bee53192a --- /dev/null +++ b/detail_png/Shaft_01450_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b36d91c518e3e290176bbcfc2302c6c1d6505a4874e014d67bf07528dab256e +size 30942 diff --git a/detail_png/Shaft_01451_diam.png b/detail_png/Shaft_01451_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..90cf6b431faaf1c73bcf2ee7de4599496e330e2d --- /dev/null +++ b/detail_png/Shaft_01451_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f67dddd1847cc324703568155515359d72f9457b23788100fe77b1ef5cf859e9 +size 23993 diff --git a/detail_png/Shaft_01451_length.png b/detail_png/Shaft_01451_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4373abb3b500790bd42899ae565a66cf6692359f --- /dev/null +++ b/detail_png/Shaft_01451_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d21ee5c8142a9a09ee07401a5d297e731a821c856c2befc1208a827a1b20df9 +size 19463 diff --git a/detail_png/Shaft_01451_title.png b/detail_png/Shaft_01451_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bb6f638f5ceaab32f5447e55776d3dfbb1c72617 --- /dev/null +++ b/detail_png/Shaft_01451_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5a0c688f24bf044bd6d86ebb0b83c578b42fe6fe827cbdce3fbccd7c5d743d0 +size 27437 diff --git a/detail_png/Shaft_01452_diam.png b/detail_png/Shaft_01452_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..acf4a30e39f2f34d7678af28f8c168263ed7d086 --- /dev/null +++ b/detail_png/Shaft_01452_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:053cd075473a66fcb82863ae34a3baf3f390fa3252ddb3888ad5847ee8bc108b +size 24069 diff --git a/detail_png/Shaft_01452_length.png b/detail_png/Shaft_01452_length.png new file mode 100644 index 0000000000000000000000000000000000000000..61404ab957db61e1d8e447eff5b6dbbf035d2d9b --- /dev/null +++ b/detail_png/Shaft_01452_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dbb281b0634d9f8d28f92ef5d218455b1f1cc4c8754fa6c9c8f909406ed145e +size 24109 diff --git a/detail_png/Shaft_01452_title.png b/detail_png/Shaft_01452_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be838ec2c11d818737f4e4c75369bdee2ae2ea93 --- /dev/null +++ b/detail_png/Shaft_01452_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8796e0a765dd3ed837ba3ec43c3340a325b0e3076bc38bcd895b78796cf3de82 +size 28482 diff --git a/detail_png/Shaft_01457_diam.png b/detail_png/Shaft_01457_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f215e276ec0d289f26dcb290515c52b2567d1f70 --- /dev/null +++ b/detail_png/Shaft_01457_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11e28ac80ea767207556da47051acbdeb198fbc478a44d893c9ce8e7b39da22c +size 32156 diff --git a/detail_png/Shaft_01457_length.png b/detail_png/Shaft_01457_length.png new file mode 100644 index 0000000000000000000000000000000000000000..833f8e1406fd398594e87149c7ae8711c26472b7 --- /dev/null +++ b/detail_png/Shaft_01457_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:204fe47762e1e9503f03d5c1f111d4c76e40fac91b80b98a6600660c00efe689 +size 44558 diff --git a/detail_png/Shaft_01457_title.png b/detail_png/Shaft_01457_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2fbf9b29bf501ef244caeee3c8657b6caa436f58 --- /dev/null +++ b/detail_png/Shaft_01457_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f383c02598b30b43c5638e1a598e1334ab160178d8dcff7380c7d77ebb1211d +size 31069 diff --git a/detail_png/Shaft_01459_diam.png b/detail_png/Shaft_01459_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6dcefcc3759579c838bb8a4699ec4c0e38f0b729 --- /dev/null +++ b/detail_png/Shaft_01459_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f81e0116e1bad7920f0b7f41071edfabff80e27436718fb8950c521f1e48c9f0 +size 29247 diff --git a/detail_png/Shaft_01459_length.png b/detail_png/Shaft_01459_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bf8d3af032302a88fb047b26b88fc0d8370f1075 --- /dev/null +++ b/detail_png/Shaft_01459_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaabbdbf754c20bfa5537f31dfa3389f7eb93f5cfa162d4e4001e04283d7fac6 +size 43856 diff --git a/detail_png/Shaft_01459_title.png b/detail_png/Shaft_01459_title.png new file mode 100644 index 0000000000000000000000000000000000000000..19afd2125c2bf2662050f7dea9646f09a142c938 --- /dev/null +++ b/detail_png/Shaft_01459_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e96bd81584c0b9f27c01d60d904d133692b5546e8fc946743418a2fb8c6fdbe2 +size 31927 diff --git a/detail_png/Shaft_01464_diam.png b/detail_png/Shaft_01464_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5b6c422a60c74e96cbba946f0b07f1c09442c1bb --- /dev/null +++ b/detail_png/Shaft_01464_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c291a6d64d405abaf6ef28e164536c1972127e00916fa508eea74c2b5dd9342 +size 33738 diff --git a/detail_png/Shaft_01464_length.png b/detail_png/Shaft_01464_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a45a13501fccafcb8dc61d11a62a80cfe89f218c --- /dev/null +++ b/detail_png/Shaft_01464_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8b3dbe6cecf17e2f21338e6c6a0044a1b49d906c24b6ab061fc023613ece06b +size 43541 diff --git a/detail_png/Shaft_01464_title.png b/detail_png/Shaft_01464_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ed89b368d449130a7f1ffee0dafdf0eeafefaa96 --- /dev/null +++ b/detail_png/Shaft_01464_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:251bd29eaa793ccf161ba33b5717d7f3f90dd2ad826c300966592c8825137963 +size 34900 diff --git a/detail_png/Shaft_01477_diam.png b/detail_png/Shaft_01477_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b8f78186a43319f0a0ffcda530c7c833fe74024c --- /dev/null +++ b/detail_png/Shaft_01477_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d21be9b5139d3718bdba8d8b1e2437a5e5ed1490e9b9839f5577b6c4c291ee9f +size 20908 diff --git a/detail_png/Shaft_01477_length.png b/detail_png/Shaft_01477_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bedc603c6720c3435c55a51731a90f0f34e0db58 --- /dev/null +++ b/detail_png/Shaft_01477_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f4301316b0991359484375fcb0debc334694939d33ef5ef596e7235159adfd2 +size 25609 diff --git a/detail_png/Shaft_01477_title.png b/detail_png/Shaft_01477_title.png new file mode 100644 index 0000000000000000000000000000000000000000..921fa434a95f53da83a7e1a6a198d2fe8e6644a6 --- /dev/null +++ b/detail_png/Shaft_01477_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97cddd946126144e0eebcd06b7f7ff0984d10a0ad73e2dd3cb449e15a09f5677 +size 30112 diff --git a/detail_png/Shaft_01482_diam.png b/detail_png/Shaft_01482_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a1f391a32fe0e111e8cd439334c77247ab50d527 --- /dev/null +++ b/detail_png/Shaft_01482_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bb1f7e1f7304b6f60aecbcc39cf3459d2431bd6db290aa6898da2b720c41371 +size 28693 diff --git a/detail_png/Shaft_01482_length.png b/detail_png/Shaft_01482_length.png new file mode 100644 index 0000000000000000000000000000000000000000..661265557f7e3c9b5b48c5c7a5cd105301d6ab59 --- /dev/null +++ b/detail_png/Shaft_01482_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcd099f1fa2cdf881b3874af2dae763bd242fd8d7a7c922f8d3e38ca9388780f +size 28468 diff --git a/detail_png/Shaft_01482_title.png b/detail_png/Shaft_01482_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d0a72b8e670ca8d71b82586b72ca08d0dc0ec349 --- /dev/null +++ b/detail_png/Shaft_01482_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c70084a9c54eecff3765431f4265b8e43b6a291d624a362f2f15c6449a2c4bb4 +size 28512 diff --git a/detail_png/Shaft_01489_diam.png b/detail_png/Shaft_01489_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eb33c97ded37eab3bfc4b80f44fb609fe1254820 --- /dev/null +++ b/detail_png/Shaft_01489_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49523e97dd5402e5c47bdb15f1f0a2172990fb1a98c3dac2170f85622602636f +size 19802 diff --git a/detail_png/Shaft_01489_length.png b/detail_png/Shaft_01489_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f07065ae0bb5bdaee6402c7e420b6b96c7bd97d --- /dev/null +++ b/detail_png/Shaft_01489_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:896812f0e1a2ddf553b5e242c1abefd488458c6153df084bfbf019d032b91a9d +size 17764 diff --git a/detail_png/Shaft_01489_title.png b/detail_png/Shaft_01489_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3ae6d59ecdc338b0dbc2376d45d317e3a201f214 --- /dev/null +++ b/detail_png/Shaft_01489_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9aa236f3b95e6b7cb37fc32d89f3ef54a00ec757257f9921991fcce506c78fa8 +size 20768 diff --git a/detail_png/Shaft_01493_diam.png b/detail_png/Shaft_01493_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..558bc58936e6645d201d0ac38a037bc7d83528ad --- /dev/null +++ b/detail_png/Shaft_01493_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b83478d608279a4cd5cb62ab64c28b2a9fe52cd6f903c93a12da9b9a288f786 +size 23844 diff --git a/detail_png/Shaft_01493_length.png b/detail_png/Shaft_01493_length.png new file mode 100644 index 0000000000000000000000000000000000000000..05b01c73e28a1ac316c766411ea678c46b0e5ac5 --- /dev/null +++ b/detail_png/Shaft_01493_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9f96e496c467da4c1d9fbb5f283f6fffd7a625d71dcf28ae10be1bd153a5d7b +size 22427 diff --git a/detail_png/Shaft_01493_title.png b/detail_png/Shaft_01493_title.png new file mode 100644 index 0000000000000000000000000000000000000000..95752ee1f60ca658c848a7f4ed1206e11fe1d58f --- /dev/null +++ b/detail_png/Shaft_01493_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ec5222b1e507983e4aec706e68dd739058ce7523494945324a7151757ac6a30 +size 23622 diff --git a/detail_png/Shaft_01496_diam.png b/detail_png/Shaft_01496_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f64f5d8a94f18877b4fb7787e39b4c5b8e626635 --- /dev/null +++ b/detail_png/Shaft_01496_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ac53df450704e173f1902981e806d17eccb05f1a48b37bdcaaa69d6532eace0 +size 28092 diff --git a/detail_png/Shaft_01496_length.png b/detail_png/Shaft_01496_length.png new file mode 100644 index 0000000000000000000000000000000000000000..33f8c846e8b325722dcf8bca61ea1af0765d4e21 --- /dev/null +++ b/detail_png/Shaft_01496_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcffa9e33a12aa1d126c4e83c1be8b7a297aface9b2a18e608336088155ec83c +size 33346 diff --git a/detail_png/Shaft_01496_title.png b/detail_png/Shaft_01496_title.png new file mode 100644 index 0000000000000000000000000000000000000000..221d1c363b21b935e12d068cf6d252b9ec7c2214 --- /dev/null +++ b/detail_png/Shaft_01496_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a14c2a7d26210eade9aa75db21276b3f33973fffe1c8c119b5267f68606041c0 +size 32169 diff --git a/detail_png/Shaft_01502_diam.png b/detail_png/Shaft_01502_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cab31c415579bc150a29880b97b69d659909cd36 --- /dev/null +++ b/detail_png/Shaft_01502_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7e375829190fd5c17d5fdae0557e5b7f2f38429683a9a2be6e89986cffdf739 +size 34854 diff --git a/detail_png/Shaft_01502_length.png b/detail_png/Shaft_01502_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e9311bc9b8b530917d705f7de27e85bbbeaa0bd5 --- /dev/null +++ b/detail_png/Shaft_01502_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be7678d90027ee6c5408301b0de474a1c0f0f9314bc567121b43fa028a2a1bc9 +size 31793 diff --git a/detail_png/Shaft_01502_title.png b/detail_png/Shaft_01502_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0aff3f419b02f901b385e4db4f97e4d94add5592 --- /dev/null +++ b/detail_png/Shaft_01502_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b47be82b774ca660eba22cb0efdfa43d4d9af9f6800fa6e1def3da24e7b79e7 +size 34909 diff --git a/detail_png/Shaft_01505_diam.png b/detail_png/Shaft_01505_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97f15ab158fbc752b25788909c71b1a893a06dd0 --- /dev/null +++ b/detail_png/Shaft_01505_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:625e7e39e82cfefc1447c59bbb29c3035566360d2c82b64bd4ffa14174c55a96 +size 24401 diff --git a/detail_png/Shaft_01505_length.png b/detail_png/Shaft_01505_length.png new file mode 100644 index 0000000000000000000000000000000000000000..254598bbe4242c339c13cc14079de83aa3c065aa --- /dev/null +++ b/detail_png/Shaft_01505_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2e85336cfa60dfb4e6c3b41c5c221efb37ab556709ccaf3ca83fe8bca4321ce +size 23483 diff --git a/detail_png/Shaft_01505_title.png b/detail_png/Shaft_01505_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dc8acd71d6722b8399307a490d3ce0cb1ebac7d1 --- /dev/null +++ b/detail_png/Shaft_01505_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7920dfa453c8c80a8e1d0979f4d309b1c8a1f6334df7a79f872de864fa2e4a4 +size 23636 diff --git a/detail_png/Shaft_01506_diam.png b/detail_png/Shaft_01506_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..705b92b6f794157b2fae686b771f367d67977f93 --- /dev/null +++ b/detail_png/Shaft_01506_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:103988e6d33f8350da163257fff27f9ffb91489ce43df7c83513646d15ce162c +size 31763 diff --git a/detail_png/Shaft_01506_length.png b/detail_png/Shaft_01506_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ae378f65c7fe671ad418f3e3f5647dc4bc3c587c --- /dev/null +++ b/detail_png/Shaft_01506_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8eda56e61dcf0e239b1cc262169e0ff157473f06af290ec060e0315917156b9 +size 32397 diff --git a/detail_png/Shaft_01506_title.png b/detail_png/Shaft_01506_title.png new file mode 100644 index 0000000000000000000000000000000000000000..372e42bd90c7b038cde7867f7592f2ca4fc35c1f --- /dev/null +++ b/detail_png/Shaft_01506_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e29983d402cba094e66bfd932005eb702a613d3c67485df93cb31a5e7425eced +size 32106 diff --git a/detail_png/Shaft_01520_diam.png b/detail_png/Shaft_01520_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..511341ad5118acae3a6f410a9a220a40fbe23e70 --- /dev/null +++ b/detail_png/Shaft_01520_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c64c1d2d26d0d3e9f2fd02ea37fb1b2305d63ec51071580903668342234f2e01 +size 30531 diff --git a/detail_png/Shaft_01520_length.png b/detail_png/Shaft_01520_length.png new file mode 100644 index 0000000000000000000000000000000000000000..50d7c1ddeeca5f9390c7d22c2e99dcdc07f6b961 --- /dev/null +++ b/detail_png/Shaft_01520_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41800d58575f605b903cf080da752c8b324b786eb9601f2f27d70df89f498a2c +size 29428 diff --git a/detail_png/Shaft_01520_title.png b/detail_png/Shaft_01520_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9143ce308bdda79640310540b79241218e87d967 --- /dev/null +++ b/detail_png/Shaft_01520_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c757e1ad0238a224141ba9af3bc0b7fa032e2e7b98a90e1d38bdbbb6ede08123 +size 31413 diff --git a/detail_png/Shaft_01521_diam.png b/detail_png/Shaft_01521_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c12ba7832b87763578ab728c815af84e077398db --- /dev/null +++ b/detail_png/Shaft_01521_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baa1cac675d9ff87cbbd1fd26528fef5d1e7d9e99a60c2b69a44977e80dfd043 +size 20208 diff --git a/detail_png/Shaft_01521_length.png b/detail_png/Shaft_01521_length.png new file mode 100644 index 0000000000000000000000000000000000000000..808f5f09f382b45c7a3c4be407a0b2878aef1709 --- /dev/null +++ b/detail_png/Shaft_01521_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2076a7f47550313080d0b494ecda0ed6295f854b3269712f76022742c8ba4b8 +size 18792 diff --git a/detail_png/Shaft_01521_title.png b/detail_png/Shaft_01521_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1afb11e2d0779a816002ea19fc609040edd33797 --- /dev/null +++ b/detail_png/Shaft_01521_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bfd75ae9373cdf65c014634f5489a84f09bdfaac05d5b80a9f3f1cb49247109a +size 27661 diff --git a/detail_png/Shaft_01526_diam.png b/detail_png/Shaft_01526_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ae6faadce69e64570b8253cc1490ff3a3e6834ab --- /dev/null +++ b/detail_png/Shaft_01526_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c422b4b7e7b04f47c3a6cac31835634174323d64b6b07491095dd3c7cee00b9 +size 25230 diff --git a/detail_png/Shaft_01526_length.png b/detail_png/Shaft_01526_length.png new file mode 100644 index 0000000000000000000000000000000000000000..05163cd8f3928d8bee95d52667061127f5910615 --- /dev/null +++ b/detail_png/Shaft_01526_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:925e2bc950b154707da9774b78c1dc0f0da74b8e145d6d49535a379095b0b743 +size 23879 diff --git a/detail_png/Shaft_01526_title.png b/detail_png/Shaft_01526_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c914f20376297890090e636e713af7754224a57b --- /dev/null +++ b/detail_png/Shaft_01526_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9b539731d8f1d39bc28772211dba50e8ae3cd5a992a78938af3fc5fb419fe55 +size 33311 diff --git a/detail_png/Shaft_01527_diam.png b/detail_png/Shaft_01527_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..32594d89fe647ae455e4419774e7810143a3f299 --- /dev/null +++ b/detail_png/Shaft_01527_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b61772c14c06e4982d6df47081091ff45de58d41604ff3ed53ca22bdd7f78f0 +size 20504 diff --git a/detail_png/Shaft_01527_length.png b/detail_png/Shaft_01527_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e0cb07c7c141f9e9dd0494bc514e3831a010407f --- /dev/null +++ b/detail_png/Shaft_01527_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:631a58fb4bbf0463ac90dd70f6a43396aa1e17f8fb538e46532988e1009b3ed9 +size 27248 diff --git a/detail_png/Shaft_01527_title.png b/detail_png/Shaft_01527_title.png new file mode 100644 index 0000000000000000000000000000000000000000..acd286663e8e17f0d3b988df67f21d920bda5717 --- /dev/null +++ b/detail_png/Shaft_01527_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01af6575b7ef6686efcc9d648ca50a53a537b30a586fc1860e4b921221033d49 +size 31289 diff --git a/detail_png/Shaft_01530_diam.png b/detail_png/Shaft_01530_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e7f96c4d6bad0959b23461dc2bb58e9e93dd66ee --- /dev/null +++ b/detail_png/Shaft_01530_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4c13010d8d179ed03739ab53833b429d231403d65cd3a0e45909f6f9d18d8be +size 25783 diff --git a/detail_png/Shaft_01530_length.png b/detail_png/Shaft_01530_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e8642c716a1ae87cfe4a61b7a77fd3ad40ba3c7b --- /dev/null +++ b/detail_png/Shaft_01530_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ca9b6e63b409c0a3a24b5165b3e3b65cb2e78e64a0bdc99d5d872f889ce5cf1 +size 24628 diff --git a/detail_png/Shaft_01530_title.png b/detail_png/Shaft_01530_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2ca46f22e4d968e78a0c281007aa15affe54df3a --- /dev/null +++ b/detail_png/Shaft_01530_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:471080ac46293e03629c2fe9de5e384cadbf40d9471973acb85b3392f1ac2580 +size 25340 diff --git a/detail_png/Shaft_01533_diam.png b/detail_png/Shaft_01533_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0635b82786ece159b4d45f982fa7884e0a09c982 --- /dev/null +++ b/detail_png/Shaft_01533_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a071bcda737545b30d66c3026d59cb6365b3b2ca6b43b209cdc8368206619a90 +size 20565 diff --git a/detail_png/Shaft_01533_length.png b/detail_png/Shaft_01533_length.png new file mode 100644 index 0000000000000000000000000000000000000000..244c426d5623b6ecdac3a42893b1c8742e2dfb01 --- /dev/null +++ b/detail_png/Shaft_01533_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d96b6324801f05e092022b607f0e12d20e0fba16e992eb469981ccc0809401f +size 24833 diff --git a/detail_png/Shaft_01533_title.png b/detail_png/Shaft_01533_title.png new file mode 100644 index 0000000000000000000000000000000000000000..04e8fbe021fcd44d8ad28a0f9e999497b9add31f --- /dev/null +++ b/detail_png/Shaft_01533_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7a8a4e7872722e91ef3165744480f15427705d514a107eb74a51f144e04d7aa +size 29702 diff --git a/detail_png/Shaft_01538_diam.png b/detail_png/Shaft_01538_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a8acc933cf22b250fe8e7e1f200fc1d2481ca2ae --- /dev/null +++ b/detail_png/Shaft_01538_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8273cfd292fabc4e0e638055b6461d100954d951da96ff869db06c0e61eec37 +size 29955 diff --git a/detail_png/Shaft_01538_length.png b/detail_png/Shaft_01538_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dd11e988d8560570f1046d380dc8d0476e042498 --- /dev/null +++ b/detail_png/Shaft_01538_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:762d4003089c2ae93cdfdf034f28e1a658758fe58a3e0b3c27fa83e46c0447a5 +size 23889 diff --git a/detail_png/Shaft_01538_title.png b/detail_png/Shaft_01538_title.png new file mode 100644 index 0000000000000000000000000000000000000000..08e21834b130bc363b25865628528de1cba7ff20 --- /dev/null +++ b/detail_png/Shaft_01538_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3565fc83e9abff960cde44268a600fafc711c3164ddad54401bca36df9f2d3ff +size 20322 diff --git a/detail_png/Shaft_01543_diam.png b/detail_png/Shaft_01543_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..28f9949368da9dd3185a414d2cfa91127822b3de --- /dev/null +++ b/detail_png/Shaft_01543_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7423886b6f58cac43ee75fc6afddeff12852df046bb1f0533fae78ea7ce9f95d +size 36444 diff --git a/detail_png/Shaft_01543_length.png b/detail_png/Shaft_01543_length.png new file mode 100644 index 0000000000000000000000000000000000000000..07df1e5a16cf37fe770d1246081423fb56c924a2 --- /dev/null +++ b/detail_png/Shaft_01543_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c88c710ea894a75f9f5060a449efc71591f0ca33a8afa2305c1cdc80f895c9f +size 34114 diff --git a/detail_png/Shaft_01543_title.png b/detail_png/Shaft_01543_title.png new file mode 100644 index 0000000000000000000000000000000000000000..00e7b07639b7832a26f0420b8d4aab991366c99c --- /dev/null +++ b/detail_png/Shaft_01543_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f25de86f882d10c82ea2f259a54e6c6f93484e8c4e31df4beeac5f2714c87951 +size 31046 diff --git a/detail_png/Shaft_01552_diam.png b/detail_png/Shaft_01552_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d35b95160ad3757f77e90ec8f1afc4ce741f4eb5 --- /dev/null +++ b/detail_png/Shaft_01552_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbe4c61250009fe8d1cacc544a2a7e37f569343b6b81be2cc1237548dca0d94a +size 33997 diff --git a/detail_png/Shaft_01552_length.png b/detail_png/Shaft_01552_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1aea8f9ad449612c575b6bd1dfdbab219b64ac9c --- /dev/null +++ b/detail_png/Shaft_01552_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b055a21ac835d1766622b5a86fd51b8ed9bffc989586af6472a1e4b2ce13c883 +size 36776 diff --git a/detail_png/Shaft_01552_title.png b/detail_png/Shaft_01552_title.png new file mode 100644 index 0000000000000000000000000000000000000000..97393482a0d8c06645c16a6c78eecf6fef178f27 --- /dev/null +++ b/detail_png/Shaft_01552_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34ede357b4786166c59ed031e1bc0145ff3069c143da60c12c825de7372e1b5c +size 28641 diff --git a/detail_png/Shaft_01553_diam.png b/detail_png/Shaft_01553_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5e20192a57bba54e7a8eec011ef8c0da6bc06a4a --- /dev/null +++ b/detail_png/Shaft_01553_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50a82788e3f81d06ea1acc324e5c729cbb20c48d2edbb7e8a732ec33a037ea9f +size 19908 diff --git a/detail_png/Shaft_01553_length.png b/detail_png/Shaft_01553_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a1908b1a13455e9d1431b11d9a2ef99fe195db78 --- /dev/null +++ b/detail_png/Shaft_01553_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f66d9f114a60af865fd8ba8d313e50c6d0bbcadf8aca61ae0f2874656c68cbc +size 16320 diff --git a/detail_png/Shaft_01553_title.png b/detail_png/Shaft_01553_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d226ea75a602c88a2e55561cc4144622105129ae --- /dev/null +++ b/detail_png/Shaft_01553_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ae58713730e131537b383394ecfcdae48e1bae5ff30c8aa2f510f949311494a +size 22078 diff --git a/detail_png/Shaft_01554_diam.png b/detail_png/Shaft_01554_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..44600403fc07f68b98a3ee428b38ea0609a04b8c --- /dev/null +++ b/detail_png/Shaft_01554_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9432689504657b74c3f3afecdfea301de81c07b1d033f23b34d693f2d53dbe7 +size 19576 diff --git a/detail_png/Shaft_01554_length.png b/detail_png/Shaft_01554_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1db36b864355c417fbf00bb41acf137e8a3d9b99 --- /dev/null +++ b/detail_png/Shaft_01554_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfb4fdd16b494dfb6a5468eec716ad051ef3c5ba5266f955cedde27f765e08a8 +size 25801 diff --git a/detail_png/Shaft_01554_title.png b/detail_png/Shaft_01554_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9fc57a6077592870b6ccc56654477c904f1fd566 --- /dev/null +++ b/detail_png/Shaft_01554_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2a0fd5a75165ebefaa6b474acdf27fb1770c7cfc9df29829a712093c55f6639 +size 31382 diff --git a/detail_png/Shaft_01556_diam.png b/detail_png/Shaft_01556_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fac41a6f25eca14f75e25657fe3d9f956792d61d --- /dev/null +++ b/detail_png/Shaft_01556_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba3f01e013007ed627e536ca42365e223eb576b87e08fe624504135d7e70aa58 +size 36782 diff --git a/detail_png/Shaft_01556_length.png b/detail_png/Shaft_01556_length.png new file mode 100644 index 0000000000000000000000000000000000000000..38f3487d58ecb82eccb5f79d069dc71c56b82da3 --- /dev/null +++ b/detail_png/Shaft_01556_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aa3cb18d40ef6379bd48a2abbd6bc6625005ce05d3c92848c38c40ccf1f9cdb +size 50803 diff --git a/detail_png/Shaft_01556_title.png b/detail_png/Shaft_01556_title.png new file mode 100644 index 0000000000000000000000000000000000000000..63373f5ebc5b2f717f58b14033292de53786b525 --- /dev/null +++ b/detail_png/Shaft_01556_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff9dfad37d53e0f5dc9cf094405eec54b54c6a7f973d5dccdc570d4aa4084b51 +size 32058 diff --git a/detail_png/Shaft_01562_diam.png b/detail_png/Shaft_01562_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..62a045cbe67d58ce2990f1d8f8691317a7ff7612 --- /dev/null +++ b/detail_png/Shaft_01562_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8992d8509bbace941e1932e57ec18660e50c791908fc231a406fb48b658ac77e +size 31103 diff --git a/detail_png/Shaft_01562_length.png b/detail_png/Shaft_01562_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d8f72a970cb559c67606ca52004c68852a8d8bac --- /dev/null +++ b/detail_png/Shaft_01562_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d44d8020e9ff9a675a3238a3a6119441c1d5659e689d0fb94336bf6686d1dbdf +size 31745 diff --git a/detail_png/Shaft_01562_title.png b/detail_png/Shaft_01562_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3b1a3eabcb1635ed771e6983420e04ca5c2ec49a --- /dev/null +++ b/detail_png/Shaft_01562_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bbb8180860d70ea96822311f41699ad28b39bbcb5cf2f6227a9eb792dfee3fe +size 31967 diff --git a/detail_png/Shaft_01569_diam.png b/detail_png/Shaft_01569_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5385d2228e6e065be19931497de61d3796c1e775 --- /dev/null +++ b/detail_png/Shaft_01569_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:471ec425a3b68847a997eeff08419434ab6eb6be053b9082d1e2385bfac8a4e4 +size 26059 diff --git a/detail_png/Shaft_01569_length.png b/detail_png/Shaft_01569_length.png new file mode 100644 index 0000000000000000000000000000000000000000..92ca0f869432fa0cc92573b351147f5309537e70 --- /dev/null +++ b/detail_png/Shaft_01569_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd2bec3f2fdb2015e27d8f0d53cef36e5d9cdb5269ce5c998345d9b45a69c6db +size 19898 diff --git a/detail_png/Shaft_01569_title.png b/detail_png/Shaft_01569_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2c52b1d98ebb7b9b5420b1a9fd8d83dc6a3c02e8 --- /dev/null +++ b/detail_png/Shaft_01569_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39f07e6c036cd8d5175e5bc1930e28a15932828f9e95ba2eb3bfd819b0b746de +size 16396 diff --git a/detail_png/Shaft_01578_diam.png b/detail_png/Shaft_01578_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9f5b9f865d3dc0a308d0bcd64db9c7e9ff41b045 --- /dev/null +++ b/detail_png/Shaft_01578_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04196b99cc8ad3a55b2d8872a75387a3226e9022ca26d417f256cca508be2a95 +size 24089 diff --git a/detail_png/Shaft_01578_length.png b/detail_png/Shaft_01578_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3862cebeace9f38afa137d65a3f075bc40e5bb3d --- /dev/null +++ b/detail_png/Shaft_01578_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d7252fa015f7b84eb016cfd896f32210c1b7b53c5df08d70e23440d2ee1d8c3 +size 21329 diff --git a/detail_png/Shaft_01578_title.png b/detail_png/Shaft_01578_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0d84f74e497261f704e640468bd32c7e6d2c7cde --- /dev/null +++ b/detail_png/Shaft_01578_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5566410851f8c8d3877fdf079ce4fd86e504a91e589bff2e0e8caed30e7015cb +size 29222 diff --git a/detail_png/Shaft_01582_diam.png b/detail_png/Shaft_01582_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5cead3316b0ea84f858ed311efadd4f01a9b4436 --- /dev/null +++ b/detail_png/Shaft_01582_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db3b0370023fb120024d87731c76d56b4238b39d4ed7416680135f5c6752ad06 +size 19890 diff --git a/detail_png/Shaft_01582_length.png b/detail_png/Shaft_01582_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cec28803135ba5008aa8de28f6e9b79fba3132ca --- /dev/null +++ b/detail_png/Shaft_01582_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:acac0cf3f814e0935d39b65f91dc518d0560dd8bb9f8e4a94ebf7bbe989d46ca +size 18628 diff --git a/detail_png/Shaft_01582_title.png b/detail_png/Shaft_01582_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8bed336eb49f4ddba7827cdcaa5f40732cd2ff77 --- /dev/null +++ b/detail_png/Shaft_01582_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6228438981b2152ebcbb137d7932717605743594223d9bdd89eaeddede54e1be +size 26568 diff --git a/detail_png/Shaft_01583_diam.png b/detail_png/Shaft_01583_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..84b1c051e040bb84ce5188347a54f22dd6e68164 --- /dev/null +++ b/detail_png/Shaft_01583_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bbb32295d12ce022c6582d8fc3b4e58304169f5bb7d8403b9d43f7da943376a +size 24701 diff --git a/detail_png/Shaft_01583_length.png b/detail_png/Shaft_01583_length.png new file mode 100644 index 0000000000000000000000000000000000000000..de4b541a98000142ef1ebad238a9530184358daf --- /dev/null +++ b/detail_png/Shaft_01583_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4686eef4f7a1c3cdfe0738b34f09582146e97b8763997622b2d75fae6475f65e +size 36255 diff --git a/detail_png/Shaft_01583_title.png b/detail_png/Shaft_01583_title.png new file mode 100644 index 0000000000000000000000000000000000000000..12462e9ba1c985cf227b3d92bb7944363d2a90ee --- /dev/null +++ b/detail_png/Shaft_01583_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bf99879b77c54ac858fbdfa780fd59a19d9ba03136cb139466f1a1f31e03543 +size 29501 diff --git a/detail_png/Shaft_01584_diam.png b/detail_png/Shaft_01584_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..14ef7bdbb73f204f2871f0d8737909e416e35f26 --- /dev/null +++ b/detail_png/Shaft_01584_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3834be574c2775d26f0e214232a1a7890221ec735c9354e5113e11e4261ef175 +size 23706 diff --git a/detail_png/Shaft_01584_length.png b/detail_png/Shaft_01584_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fe2eae6d7a1bdaf7a3bba227423c014d7fcf3ada --- /dev/null +++ b/detail_png/Shaft_01584_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd5bce11f9e6a88e111bc44517a8911a5c1b5387a20695892a66012b8c115865 +size 32364 diff --git a/detail_png/Shaft_01584_title.png b/detail_png/Shaft_01584_title.png new file mode 100644 index 0000000000000000000000000000000000000000..30ec4e58f1d297a749d2af6928b29788999e3183 --- /dev/null +++ b/detail_png/Shaft_01584_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2efe094f1d9ec085a82580b4fcd6cc203924e8ab71ed039cf7e75d553a274ac +size 35257 diff --git a/detail_png/Shaft_01585_diam.png b/detail_png/Shaft_01585_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ac94f2a7dcf5e3eb3cee2d53198914b2b28bf3a8 --- /dev/null +++ b/detail_png/Shaft_01585_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e215f6f1155b8d7b84553eb573e68109ab80546b07f67effe50a08bc542f6f42 +size 24872 diff --git a/detail_png/Shaft_01585_length.png b/detail_png/Shaft_01585_length.png new file mode 100644 index 0000000000000000000000000000000000000000..25075abc34d8ce790f99e0c718fe4885c690b580 --- /dev/null +++ b/detail_png/Shaft_01585_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6704e0843cdd167f2005a64737409a0eb5739b7ec9ad3a83f2ed389beb814f6 +size 21580 diff --git a/detail_png/Shaft_01585_title.png b/detail_png/Shaft_01585_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bc1e434a44c4f58cd6122ad2029d109cc8dec364 --- /dev/null +++ b/detail_png/Shaft_01585_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08dc0d5c0374cb8aadab1858360782ed4daf323cb0dae7d8405c916c18bb10a2 +size 21093 diff --git a/detail_png/Shaft_01592_diam.png b/detail_png/Shaft_01592_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..96e14fc3257d0f4ae00bed8d03dec912cb6d03f4 --- /dev/null +++ b/detail_png/Shaft_01592_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60f2c6553d5ec8e2c56b3fec2d5d2004d195cf6d41c6067977f8c1fb6bb11a07 +size 25443 diff --git a/detail_png/Shaft_01592_length.png b/detail_png/Shaft_01592_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a4b6efa2e52e0d05da93c64d9e28ec40c8d3e104 --- /dev/null +++ b/detail_png/Shaft_01592_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02b1cdda6b7a67b5e547b0330775709f46cce2280eaa1228ea0ef27aee26b1a0 +size 20160 diff --git a/detail_png/Shaft_01592_title.png b/detail_png/Shaft_01592_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be6abb228bfb837ce2dc9372c2e30821fca457f5 --- /dev/null +++ b/detail_png/Shaft_01592_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09bb999ea40beaac81915e11f2a320ab979d5f8cf2ac123b84991346a3264dad +size 26964 diff --git a/detail_png/Shaft_01595_diam.png b/detail_png/Shaft_01595_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..15d11d69d7e904d56b327873019af526149d5241 --- /dev/null +++ b/detail_png/Shaft_01595_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cb23db27e9045e16d024a47818a7636ececcdc385be85db388fec7b02855808 +size 32567 diff --git a/detail_png/Shaft_01595_length.png b/detail_png/Shaft_01595_length.png new file mode 100644 index 0000000000000000000000000000000000000000..67a82ddccd3859a6242bbbf64f05c244e9e40b79 --- /dev/null +++ b/detail_png/Shaft_01595_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64a5640b772e4cae111258610fbc359ac80bc6db411a0f7621d2582775c17866 +size 44443 diff --git a/detail_png/Shaft_01595_title.png b/detail_png/Shaft_01595_title.png new file mode 100644 index 0000000000000000000000000000000000000000..90f6e3c32601f8ce6fcd02d04d0e1569358731cd --- /dev/null +++ b/detail_png/Shaft_01595_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e37b6263ce5fe3bf423badf1c6e8e11e39d7b33abba585af2490ea2bab3e9e5 +size 32426 diff --git a/detail_png/Shaft_01599_diam.png b/detail_png/Shaft_01599_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6ddd087c6f954dc3020cbef36bda7635b6c78aa1 --- /dev/null +++ b/detail_png/Shaft_01599_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ab1b9c08182914e42466dc6d71bcd06745e894ec056ad172334fe70cded1741 +size 30386 diff --git a/detail_png/Shaft_01599_length.png b/detail_png/Shaft_01599_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6fcc0d8d71428e5ab85aaf4184a70998f0df8f9b --- /dev/null +++ b/detail_png/Shaft_01599_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5a9fed1b44cb8a097f557d7bf95770b4848937babd0d6ec38da17ea71f16bce +size 30797 diff --git a/detail_png/Shaft_01599_title.png b/detail_png/Shaft_01599_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3aa8dfe60f6cb5f739c7bb8b144173fd644a6ff8 --- /dev/null +++ b/detail_png/Shaft_01599_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87ce3e727f6e9b8c91bc2876db207c87869507f171941c6966148b8e27347a90 +size 29913 diff --git a/detail_png/Shaft_01601_diam.png b/detail_png/Shaft_01601_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0333412f150ea20f63235440ba9eb205a0d14770 --- /dev/null +++ b/detail_png/Shaft_01601_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df321b3dbaad907f0cf3d2419444e3ee910de4c098241162f34240110fdc884b +size 18402 diff --git a/detail_png/Shaft_01601_length.png b/detail_png/Shaft_01601_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bbe89d766e37f9b480b10e88d4bd33b0ce42ee81 --- /dev/null +++ b/detail_png/Shaft_01601_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd441fb6ecb39f24da878142818fcb01458c596f603a49adea6970240c9982e5 +size 16370 diff --git a/detail_png/Shaft_01601_title.png b/detail_png/Shaft_01601_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4b8a23adf330e138d94de37e82e7d2982ba23104 --- /dev/null +++ b/detail_png/Shaft_01601_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b2d14be1d19304d158915750d319abb51bf01bf5b4356bbef6c9008c8b35cb0 +size 18684 diff --git a/detail_png/Shaft_01608_diam.png b/detail_png/Shaft_01608_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25b1579a4c6ac2dce8845817b90cfa37c27316c6 --- /dev/null +++ b/detail_png/Shaft_01608_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e99573ffe77ac5789bc364501252e72d8ffe9f348b49542362b6f0e33e79376 +size 20689 diff --git a/detail_png/Shaft_01608_length.png b/detail_png/Shaft_01608_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f8094416ee04b76b52cef641969c1c3e214dbdfe --- /dev/null +++ b/detail_png/Shaft_01608_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd841cbd374e133c21e32802780f86b659089ff3256ea70d915a20d6ed684204 +size 15886 diff --git a/detail_png/Shaft_01608_title.png b/detail_png/Shaft_01608_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3eefb2d0108db41c3de501f1d7a3d2be26c9ff43 --- /dev/null +++ b/detail_png/Shaft_01608_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:993870290b3a6b4b53ddb316290b31d3d9a33d20ab1fd88ffa12607a715a2c58 +size 16611 diff --git a/detail_png/Shaft_01609_diam.png b/detail_png/Shaft_01609_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6df0bba21158f55f31e1f765802002ba87161c47 --- /dev/null +++ b/detail_png/Shaft_01609_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4958cd1cf09e6fcf53b3152e9a25a724d1128ac6acb97e2a9943dd7bd2d81f5a +size 30911 diff --git a/detail_png/Shaft_01609_length.png b/detail_png/Shaft_01609_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3be7df2de35e38ad158822598852e7e2886827ad --- /dev/null +++ b/detail_png/Shaft_01609_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f9bda3a9a2bae0f5ba4ab7711272afdd770bf470c11e82edb8866b84f4db191 +size 39218 diff --git a/detail_png/Shaft_01609_title.png b/detail_png/Shaft_01609_title.png new file mode 100644 index 0000000000000000000000000000000000000000..49387e479cb3fa3a8633a570e9ad6776789c5bc4 --- /dev/null +++ b/detail_png/Shaft_01609_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da18d510b7a332f16ae2487acc2b06c16c3b0c3bb60c6531549e4a9a61353e99 +size 35907 diff --git a/detail_png/Shaft_01618_diam.png b/detail_png/Shaft_01618_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..613de9babc0ef1162652b55da38ec06392ea09e9 --- /dev/null +++ b/detail_png/Shaft_01618_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be89900eca8cb1b47ad47122341b0f35aceb96f9f544f4a968c2e1efc9416ccf +size 27176 diff --git a/detail_png/Shaft_01618_length.png b/detail_png/Shaft_01618_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0eb807222dad512071f815d27d79227d2504508a --- /dev/null +++ b/detail_png/Shaft_01618_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e4d64a819188c6c441cac8e37f7e35de1954e6a93f0455c096202541a400bb1 +size 30532 diff --git a/detail_png/Shaft_01618_title.png b/detail_png/Shaft_01618_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2ec54a498b512ddc198c41bb396619c1e24316ba --- /dev/null +++ b/detail_png/Shaft_01618_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac6ab0e718a91b1d9cd2f26482a750a5395e80dbd6146d2a70d38b1db2239da6 +size 31669 diff --git a/detail_png/Shaft_01623_diam.png b/detail_png/Shaft_01623_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1240169428366e13ef7ac3852a10c5be36fd879b --- /dev/null +++ b/detail_png/Shaft_01623_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:204c596fd02c46045fb88de0b464314496b76d5211dbe68de264a50fc88d3b7e +size 26469 diff --git a/detail_png/Shaft_01623_length.png b/detail_png/Shaft_01623_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77017a8113db88739115eefb9210188013e82c26 --- /dev/null +++ b/detail_png/Shaft_01623_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a39e45cedd945c1f89d169125d2fe3145789bdee4c9b51684b1ff92c9ce6e53d +size 37659 diff --git a/detail_png/Shaft_01623_title.png b/detail_png/Shaft_01623_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fe4d507b8bbda035c20577e325ab3f3648c1ec2e --- /dev/null +++ b/detail_png/Shaft_01623_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53c0c50f5866c87b5641851f3cc272b93cfe6ebebc8cd82ca9926d7fd7ba9d29 +size 32627 diff --git a/detail_png/Shaft_01624_diam.png b/detail_png/Shaft_01624_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48a2182cb3bb7cf3c16c1a26bd5f99be9ac6b7d0 --- /dev/null +++ b/detail_png/Shaft_01624_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b7efbe1f2a275ca52f7798d4c16dc0423714b3994ada80640fd6024798be771 +size 29579 diff --git a/detail_png/Shaft_01624_length.png b/detail_png/Shaft_01624_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1d6bb8078dcd10a257b06df61fcd070dca6f726d --- /dev/null +++ b/detail_png/Shaft_01624_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:414f120613afb8b79dc5f83c60ecaf79dd25447e3502dda017edf9c36e559b29 +size 25194 diff --git a/detail_png/Shaft_01624_title.png b/detail_png/Shaft_01624_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c9cf381c7824c89543ce3e814bfb3d8e0014ace7 --- /dev/null +++ b/detail_png/Shaft_01624_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9471b106dcc5439fe3308450376fcd1b34ae7c7fe6357476ef435c27e88dce1a +size 22461 diff --git a/detail_png/Shaft_01625_diam.png b/detail_png/Shaft_01625_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..43d26bb0a6b5ff0f11fb317b96e7e3e825a5feb8 --- /dev/null +++ b/detail_png/Shaft_01625_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d188a3f66b22b98aa3b1af0562f7f465dfda3ed503cf17418f1f5bc7e553f9d7 +size 29001 diff --git a/detail_png/Shaft_01625_length.png b/detail_png/Shaft_01625_length.png new file mode 100644 index 0000000000000000000000000000000000000000..30414060dad120810c4ec192921871c318624bd6 --- /dev/null +++ b/detail_png/Shaft_01625_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d94e78f075c13cbd99fa826528cf2b92e52b968be76b624ceb8bff3ef7d0786 +size 41489 diff --git a/detail_png/Shaft_01625_title.png b/detail_png/Shaft_01625_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7d5748521b44de7812c1efcca945b8e4f1bb379f --- /dev/null +++ b/detail_png/Shaft_01625_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b41fd5aaf0404e622d21e6fcd7bb79e301d32d7a467588227131d35437afb91f +size 32933 diff --git a/detail_png/Shaft_01628_diam.png b/detail_png/Shaft_01628_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2869976ebee47cca9da5a34eb24fea31c1821124 --- /dev/null +++ b/detail_png/Shaft_01628_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f21b9e709e0b70037edadda618be7b061497484e9cdace37e9d3051aac9136c +size 31855 diff --git a/detail_png/Shaft_01628_length.png b/detail_png/Shaft_01628_length.png new file mode 100644 index 0000000000000000000000000000000000000000..327abd42ffddeb8b658655a2ee4066fe94044072 --- /dev/null +++ b/detail_png/Shaft_01628_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c7eeb418062ba537889f029feac92f03773ca4703f656c05be66b41d8e1fb3a +size 31710 diff --git a/detail_png/Shaft_01628_title.png b/detail_png/Shaft_01628_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1ff4e89801e8e282f5e832e16a12b508de0f08a6 --- /dev/null +++ b/detail_png/Shaft_01628_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5fa983fee15cd2d4a4de0f8715aece7bda5e6bb4455abe8024bf8db48741c77 +size 29336 diff --git a/detail_png/Shaft_01635_diam.png b/detail_png/Shaft_01635_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7a63237bf663b89d7cfbded4b568a88d48ea358a --- /dev/null +++ b/detail_png/Shaft_01635_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfd2300310c1c0d676c6dfa67ad43b30cf9abba36561508aa42a0b441f8aa416 +size 19602 diff --git a/detail_png/Shaft_01635_length.png b/detail_png/Shaft_01635_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1a802e0b8429a9b0c1453bd0da6a6d576a1cdf90 --- /dev/null +++ b/detail_png/Shaft_01635_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bcd11e4bc36cc9c3bd1427b6490a00f42a75276676e3cbc10edea292554f888 +size 14171 diff --git a/detail_png/Shaft_01635_title.png b/detail_png/Shaft_01635_title.png new file mode 100644 index 0000000000000000000000000000000000000000..167e1f1e36e5dbaf1943e2dc01a2a5442a061721 --- /dev/null +++ b/detail_png/Shaft_01635_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:607a7a08d73ce75b5f4e135eb60b53c9e12bbcf22e578be680bc40c45efaf4c6 +size 14695 diff --git a/detail_png/Shaft_01640_diam.png b/detail_png/Shaft_01640_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f80bdc46972656b23043ba221136e4840116b0f0 --- /dev/null +++ b/detail_png/Shaft_01640_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:289f06c9402acfe4f804c54c0be29364c09bdbe6dc0bdff3ac7e79e0f73dfc3e +size 25186 diff --git a/detail_png/Shaft_01640_length.png b/detail_png/Shaft_01640_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0388a6be5bb085b9285467fdb70cceae30a651d9 --- /dev/null +++ b/detail_png/Shaft_01640_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8a882d39b0c686e39ef211f3b336f055c48d41566bbdd704b4c3935ca5a225a +size 17974 diff --git a/detail_png/Shaft_01640_title.png b/detail_png/Shaft_01640_title.png new file mode 100644 index 0000000000000000000000000000000000000000..460e3bcc2a8d6bb8fbd5cba45fef5b6ae0a1c89d --- /dev/null +++ b/detail_png/Shaft_01640_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09ea8c395b57f21f39e0bf7405b14315904f4a8cac9d962aad54768e86891825 +size 18566 diff --git a/detail_png/Shaft_01641_diam.png b/detail_png/Shaft_01641_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..92a767cbb688f46b77535e9d1792b366df987eba --- /dev/null +++ b/detail_png/Shaft_01641_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b48fbbfb098cc2739245a84214649c7cb7009223caf7321d9630557031ccfea +size 31787 diff --git a/detail_png/Shaft_01641_length.png b/detail_png/Shaft_01641_length.png new file mode 100644 index 0000000000000000000000000000000000000000..daf949dac93566bb3f0f9ca995e0c5a15987cbab --- /dev/null +++ b/detail_png/Shaft_01641_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b368a2fefe86847b316b78a42279a6452e809b37f44c1eac7303c21eb2442e2 +size 31095 diff --git a/detail_png/Shaft_01641_title.png b/detail_png/Shaft_01641_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eac44adb0b01bd1a1b37ab745353541db5aeaa68 --- /dev/null +++ b/detail_png/Shaft_01641_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a310bc7eee64b0e86ebb965d49b0feca520f9f1627f4a686a8b0a2b27fd88e89 +size 30318 diff --git a/detail_png/Shaft_01642_diam.png b/detail_png/Shaft_01642_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..51e35665699c98a7e92cad3dddcd8406e40226d9 --- /dev/null +++ b/detail_png/Shaft_01642_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91e22660fdea4aeefa4ccc1b512b4fc272f817faafa6fcd6e0dc17b40175fa10 +size 27107 diff --git a/detail_png/Shaft_01642_length.png b/detail_png/Shaft_01642_length.png new file mode 100644 index 0000000000000000000000000000000000000000..da6528d1be4c3d3d1e40569533f70a666b554d08 --- /dev/null +++ b/detail_png/Shaft_01642_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6831bfd98196b85e8d6c6912b73aeb6712545210ccd458d6d71e7d5bd9bf353d +size 37581 diff --git a/detail_png/Shaft_01642_title.png b/detail_png/Shaft_01642_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f8b8781462ac8c13e99892d9ee4004439170771d --- /dev/null +++ b/detail_png/Shaft_01642_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:443bc0407a1f10635d59a2c94304c316345912f17d3ca35afcc0cd67fc20aa43 +size 29467 diff --git a/detail_png/Shaft_01643_diam.png b/detail_png/Shaft_01643_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1e90b634bcd60cb33b47d584b3757f7d3badc11e --- /dev/null +++ b/detail_png/Shaft_01643_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4357e0f8f45bfce80df11b0b6c56d077681aa25c620ee9084622fded67494a7b +size 33759 diff --git a/detail_png/Shaft_01643_length.png b/detail_png/Shaft_01643_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ce53b26d26f6ef20eacdedf2cdaf9c74140d615f --- /dev/null +++ b/detail_png/Shaft_01643_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76e3b1aac13fe6bc4c3d3c5c3bd6fd4eaaca9978edce07f841dd858d54ef8e0b +size 28280 diff --git a/detail_png/Shaft_01643_title.png b/detail_png/Shaft_01643_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c4e4c1e91286feb71a4bc1c09ca3d60a647c167 --- /dev/null +++ b/detail_png/Shaft_01643_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5e24f4dff3dd4a3e3d2317c94bd5d51c60c64c7aa0bfe316c217645a296196a +size 21525 diff --git a/detail_png/Shaft_01646_diam.png b/detail_png/Shaft_01646_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2ae5427f67eb813ecc9a8cd5722bbb64307f2f1d --- /dev/null +++ b/detail_png/Shaft_01646_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:520c43748278e488fd920aacb4c34d26fcec440c8b930500942ac35966203e9c +size 24361 diff --git a/detail_png/Shaft_01646_length.png b/detail_png/Shaft_01646_length.png new file mode 100644 index 0000000000000000000000000000000000000000..01e1859027c47b6ea71dad72c7d2490741866863 --- /dev/null +++ b/detail_png/Shaft_01646_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6eac8564a14a183c53b0c445b8dc2dd4ace56ac507c4d1974c337db92b76d66e +size 31961 diff --git a/detail_png/Shaft_01646_title.png b/detail_png/Shaft_01646_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d2d797b40af60df8fe2a09a672d36cbc5cc88de8 --- /dev/null +++ b/detail_png/Shaft_01646_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17df15ffe000b61e0714eb3c407d5e1784f3d84a3dee24ab25512cc3432d0c3f +size 35553 diff --git a/detail_png/Shaft_01648_diam.png b/detail_png/Shaft_01648_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..779ad43517cba85ce9537d06b6f4b049dca0a609 --- /dev/null +++ b/detail_png/Shaft_01648_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59d7fe6b51817e936210ec22dc4acbf87ede0a67e06fe33a4cee913ade30f31b +size 33944 diff --git a/detail_png/Shaft_01648_length.png b/detail_png/Shaft_01648_length.png new file mode 100644 index 0000000000000000000000000000000000000000..10cbc6ad7fdf6aab975a067710bea113c4f419d2 --- /dev/null +++ b/detail_png/Shaft_01648_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:399c2c0ba5cc989f9e64b4470dc7a851dae271ed83ac30dfb59c95fe8d52a72a +size 26745 diff --git a/detail_png/Shaft_01648_title.png b/detail_png/Shaft_01648_title.png new file mode 100644 index 0000000000000000000000000000000000000000..60f9db229ec476f1f4f6c8193c44366789ab935e --- /dev/null +++ b/detail_png/Shaft_01648_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be8fae0fc198c7801e616796134af501c2f1d7d53cecbffee5527667012f925e +size 19648 diff --git a/detail_png/Shaft_01657_diam.png b/detail_png/Shaft_01657_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e1e47744c7ebde7cc9dbe9afec00ec167f6526b3 --- /dev/null +++ b/detail_png/Shaft_01657_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebb9c4d7e297441359e4b20268a55627854fcde253017d4aa3f81737e81c98fe +size 26293 diff --git a/detail_png/Shaft_01657_length.png b/detail_png/Shaft_01657_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7dc0199186e15a01a3784bd730f062e33064a6d7 --- /dev/null +++ b/detail_png/Shaft_01657_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25af4c712c559498911066dd90ef649ec02eda83d63b69968f48c4f0042396c7 +size 26241 diff --git a/detail_png/Shaft_01657_title.png b/detail_png/Shaft_01657_title.png new file mode 100644 index 0000000000000000000000000000000000000000..450532008ad302eb7b79ca0f05d0f62e1d8b558c --- /dev/null +++ b/detail_png/Shaft_01657_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60511fa2609adefb6c91f0a2fa5a0eeff10eca0dd95dd62703d287717b610199 +size 31494 diff --git a/detail_png/Shaft_01661_diam.png b/detail_png/Shaft_01661_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..de72796f6530b41f9d8405281b06b8be982d1871 --- /dev/null +++ b/detail_png/Shaft_01661_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:160ecde36c4757efcbbe97547b687a435e70b042a2d5315db89d58a70e37b465 +size 23687 diff --git a/detail_png/Shaft_01661_length.png b/detail_png/Shaft_01661_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bee7c0984cc414a01cab0369d5f04954538fc21f --- /dev/null +++ b/detail_png/Shaft_01661_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24ba484433ebb6fb3f24112822f25c39acb445c1d00231d8a13b810f179f6ee6 +size 32766 diff --git a/detail_png/Shaft_01661_title.png b/detail_png/Shaft_01661_title.png new file mode 100644 index 0000000000000000000000000000000000000000..25d5465645e7acb347c1effc43db5049f9202d9e --- /dev/null +++ b/detail_png/Shaft_01661_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12cbb7e3d5abdb5f9ca01f3372f611dd2437de097b22022919c0fe82de0aa449 +size 31882 diff --git a/detail_png/Shaft_01663_diam.png b/detail_png/Shaft_01663_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a601298064a3da856e9fafac19750a5aa94e3bb4 --- /dev/null +++ b/detail_png/Shaft_01663_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc8ec3de46753730c8b82c6067b6adc7cf8c0127ca55075d6e74bd312b217a81 +size 24754 diff --git a/detail_png/Shaft_01663_length.png b/detail_png/Shaft_01663_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d130116f011a9e338b09744afee1ed341975ea39 --- /dev/null +++ b/detail_png/Shaft_01663_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bc6a7f5359352993511c1326debbb6a712ee3a3269e35dace9a8170818dc168 +size 28339 diff --git a/detail_png/Shaft_01663_title.png b/detail_png/Shaft_01663_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cd6ca869cc5246d22b8ecc8ec0a78d3ddffb70a1 --- /dev/null +++ b/detail_png/Shaft_01663_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:678d9977c22fc9b25d1a2a5bed424b6f19f010b79ca4cc5f3ec46acb1ffb86db +size 35688 diff --git a/detail_png/Shaft_01677_diam.png b/detail_png/Shaft_01677_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cccd00b65436dedd3e76fcc5e9e4fb8257c13a51 --- /dev/null +++ b/detail_png/Shaft_01677_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24849e367e8d5bb93122b7ca8077dddc0b442d00dabeb497354235b4e2e8855e +size 25926 diff --git a/detail_png/Shaft_01677_length.png b/detail_png/Shaft_01677_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2ffaeedc3c06fb49947f80228c632244692483e9 --- /dev/null +++ b/detail_png/Shaft_01677_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d51e32168b305932f3ed83f91c9971a7bcd1c128d99c19e9c443b69723835c29 +size 22437 diff --git a/detail_png/Shaft_01677_title.png b/detail_png/Shaft_01677_title.png new file mode 100644 index 0000000000000000000000000000000000000000..da1d67edffba9db6fec271514d1364943ebc54fc --- /dev/null +++ b/detail_png/Shaft_01677_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0bb557a3f84987efe72c660c8fc197164f04977d582a057b933baea87bcaa7f +size 20763 diff --git a/detail_png/Shaft_01679_diam.png b/detail_png/Shaft_01679_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..654fa4e81a1ab5e0dc7b7882ea0316f64ee05497 --- /dev/null +++ b/detail_png/Shaft_01679_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2af5cd9c42b48c4937a831a0cada6f5394f46bba725cb1e9102701505cd309e5 +size 32862 diff --git a/detail_png/Shaft_01679_length.png b/detail_png/Shaft_01679_length.png new file mode 100644 index 0000000000000000000000000000000000000000..72877f21a95eb27829954537eec26134ef51f6f4 --- /dev/null +++ b/detail_png/Shaft_01679_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:460caf2c8512367794dfafedc2af4ec54fb0df9e8747185a93b25d950d1905ed +size 40500 diff --git a/detail_png/Shaft_01679_title.png b/detail_png/Shaft_01679_title.png new file mode 100644 index 0000000000000000000000000000000000000000..52248f851747ade931fe83b55b1a7c008e2e4012 --- /dev/null +++ b/detail_png/Shaft_01679_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52a393c2c3f7389890a17e34879cc967d279dd4da399c011840747176f0318a5 +size 32214 diff --git a/detail_png/Shaft_01682_diam.png b/detail_png/Shaft_01682_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1ff03fc4b2135b6e0fcaddbc4684e05c3611e8ba --- /dev/null +++ b/detail_png/Shaft_01682_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e62faeadc8da907b4f4ebaeee5f763e560fb8644a78b9696fc141b76dcb5d0f5 +size 25735 diff --git a/detail_png/Shaft_01682_length.png b/detail_png/Shaft_01682_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f6c0416619c70f19e7de26fcda2395e977f5e1a0 --- /dev/null +++ b/detail_png/Shaft_01682_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d6c0d16688a111ff23da068f80a032675e55f11b5938f74f587b791b2bec1e6 +size 37992 diff --git a/detail_png/Shaft_01682_title.png b/detail_png/Shaft_01682_title.png new file mode 100644 index 0000000000000000000000000000000000000000..653b24ba665e5e318e2a23ed92b331a8aff78174 --- /dev/null +++ b/detail_png/Shaft_01682_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68f539847465d29e1e135152accc9daafde8bd164224412cee919e6ac4b360c7 +size 31080 diff --git a/detail_png/Shaft_01685_diam.png b/detail_png/Shaft_01685_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a2170e36bd22cf0e546ea32c4b616a816f32373a --- /dev/null +++ b/detail_png/Shaft_01685_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fff766e3d37c47f2cfcf15579ed0b69639b8d2bea4e3dd945505d107ee5893b7 +size 20846 diff --git a/detail_png/Shaft_01685_length.png b/detail_png/Shaft_01685_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d964f3517c972d77201111adf26dd446c273f126 --- /dev/null +++ b/detail_png/Shaft_01685_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ce1ce9ac327263cd12463c4090612bb28f06944a5ddd6d9296a18250fb79975 +size 23291 diff --git a/detail_png/Shaft_01685_title.png b/detail_png/Shaft_01685_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c12af62dc8704425fb80c9fc0a3973f5cfc18290 --- /dev/null +++ b/detail_png/Shaft_01685_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e04e5de0a441fad310e90f9926de8832fe5620479826044a780e0e7d4093b4d +size 32855 diff --git a/detail_png/Shaft_01692_diam.png b/detail_png/Shaft_01692_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3e1c1bee8348592c39a97e8ae2bfd2be432648e6 --- /dev/null +++ b/detail_png/Shaft_01692_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baa5fa8794e0b4613371c76e4c797eb43fbfa7d08a7e53486afd9cb871a9de75 +size 23997 diff --git a/detail_png/Shaft_01692_length.png b/detail_png/Shaft_01692_length.png new file mode 100644 index 0000000000000000000000000000000000000000..10ac4106b73c686350de15b1f620b6bf296654df --- /dev/null +++ b/detail_png/Shaft_01692_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4c30862d15aa0df62aed080ee1e71239beb9727eb46bb859118dd047bda8f8d +size 34706 diff --git a/detail_png/Shaft_01692_title.png b/detail_png/Shaft_01692_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3f4f72dbe60e96bd1c675cdfc6124751ac73c928 --- /dev/null +++ b/detail_png/Shaft_01692_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e8867e0374d23f5c8f8fc22ec46a1a467a89abf5ca92e036f1036acae8c5763 +size 35925 diff --git a/detail_png/Shaft_01695_diam.png b/detail_png/Shaft_01695_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1448fbaa59bbb20905bb232fdde102f01423f638 --- /dev/null +++ b/detail_png/Shaft_01695_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bfefbc55953a1e5bccfe9229754db3d8803cb9a986642a186818796a8937e7f +size 36600 diff --git a/detail_png/Shaft_01695_length.png b/detail_png/Shaft_01695_length.png new file mode 100644 index 0000000000000000000000000000000000000000..af0da3e201ba8cac468609f3b801c5537cc321f2 --- /dev/null +++ b/detail_png/Shaft_01695_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74d61087dfd112374a7877a2f7fbc5ba67b4fc2839ed147180617ce4c747e19d +size 51184 diff --git a/detail_png/Shaft_01695_title.png b/detail_png/Shaft_01695_title.png new file mode 100644 index 0000000000000000000000000000000000000000..90491dab2a865bff98779e695724da3c8f7ddf0f --- /dev/null +++ b/detail_png/Shaft_01695_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f965141302ca54c91508d6621caa27a72c8bd7bfbe5d1616874104b9fb25e68d +size 32948 diff --git a/detail_png/Shaft_01696_diam.png b/detail_png/Shaft_01696_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8ead29e64c691baedc80d275a8053c503bd657b5 --- /dev/null +++ b/detail_png/Shaft_01696_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ca9f13ad28a789cb80dda4cf175d8dbb82f087462608b322ecb00da3027e609 +size 25330 diff --git a/detail_png/Shaft_01696_length.png b/detail_png/Shaft_01696_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f071c797e0c50d4b0b5b6db94b9d55e9a306a75a --- /dev/null +++ b/detail_png/Shaft_01696_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f05070da9bbe109f472e477a5325fbe5ce747f5e3750f1348c70a37497ba243 +size 33761 diff --git a/detail_png/Shaft_01696_title.png b/detail_png/Shaft_01696_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aa0e704f86b7d3c5fcaaf9c21e50a2c363097e77 --- /dev/null +++ b/detail_png/Shaft_01696_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36e489dce5955b24fcf88aef5c446f5f9796abe3d7763193ddfd5ab38a653d0c +size 30065 diff --git a/detail_png/Shaft_01704_diam.png b/detail_png/Shaft_01704_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..798746244f4c0757bc03e72a79d5f8c120621513 --- /dev/null +++ b/detail_png/Shaft_01704_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edb2ac46e1379b329f868402d14f6c775da724dd60f46d1f0dc2f109f0883feb +size 23174 diff --git a/detail_png/Shaft_01704_length.png b/detail_png/Shaft_01704_length.png new file mode 100644 index 0000000000000000000000000000000000000000..34bb58cd2938f7ed7aa98b3f973460f8d289e6de --- /dev/null +++ b/detail_png/Shaft_01704_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48b103344cc33b97e0d5fdb18753da0720b9087f8221321cfb4ee32f7147349b +size 21800 diff --git a/detail_png/Shaft_01704_title.png b/detail_png/Shaft_01704_title.png new file mode 100644 index 0000000000000000000000000000000000000000..71abd30a662e1a5380432449cd9534fb900578c6 --- /dev/null +++ b/detail_png/Shaft_01704_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8852fa6b345e4ec1efe069c9fda30bf7d7ebfc1120d730dea3c4628932f161ab +size 27162 diff --git a/detail_png/Shaft_01707_diam.png b/detail_png/Shaft_01707_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ba1385ed8ec35266c9ac6de6b5d5625ac375bc73 --- /dev/null +++ b/detail_png/Shaft_01707_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82d9105e29c818ee944b032f2aa9b1650b2821493b9ca3f6d8ec9f071991d540 +size 20638 diff --git a/detail_png/Shaft_01707_length.png b/detail_png/Shaft_01707_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc6936511f5e3edfbe6728620cd9b6f8a30c640d --- /dev/null +++ b/detail_png/Shaft_01707_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3bf2c2a1cd889e35f5e18a2a3ee67d930da35acc6fdaeb3d2d262999ba95b0e +size 19709 diff --git a/detail_png/Shaft_01707_title.png b/detail_png/Shaft_01707_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e761dfc8838203793e8134b9b52b679f3c3d506e --- /dev/null +++ b/detail_png/Shaft_01707_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e91fbd3757ca410150e0f8de306b2fc6cea6f8eaa91623ea9c10a64d1d2f023 +size 29436 diff --git a/detail_png/Shaft_01712_diam.png b/detail_png/Shaft_01712_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..89cdc7eeaef3a27900bb172c62431436f2aab89b --- /dev/null +++ b/detail_png/Shaft_01712_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:313cbed71f68151a5632871a54cf6e06128fe6a2c5da76a0cdb060511af53d4d +size 30757 diff --git a/detail_png/Shaft_01712_length.png b/detail_png/Shaft_01712_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3d962ca6cb4ea3a8e866e2c25fdd4b05a36c1831 --- /dev/null +++ b/detail_png/Shaft_01712_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e814a6349221f3e6b429df49941b6f39d431aa9da33b3c33c8b22684f8599716 +size 43852 diff --git a/detail_png/Shaft_01712_title.png b/detail_png/Shaft_01712_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9db96675dc927d71e4a69581c6e0fcf4c262fac4 --- /dev/null +++ b/detail_png/Shaft_01712_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cb3a898985023576be9c36fcd69420d2ab14ac91d0fb954263238dc8e506641 +size 28906 diff --git a/detail_png/Shaft_01721_diam.png b/detail_png/Shaft_01721_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1180d9dbf523b4516f14a76190d02783d7f55f46 --- /dev/null +++ b/detail_png/Shaft_01721_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e83ffcdd0c5c19738361c5f7ad961868fb7f7ea1409fb28b3a76df8d3b9d4b6 +size 19673 diff --git a/detail_png/Shaft_01721_length.png b/detail_png/Shaft_01721_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9950b4cbf25c888b1a0a1896d3250c3b5902bdc4 --- /dev/null +++ b/detail_png/Shaft_01721_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:325744665a7b16adaa459b2167ee020edff728ffa23b9c479eeaf193a8048cc2 +size 14833 diff --git a/detail_png/Shaft_01721_title.png b/detail_png/Shaft_01721_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e6a3a38900a18dcbf7f3438874dcaf497cd23824 --- /dev/null +++ b/detail_png/Shaft_01721_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec543360ffa2d03ed1a0388deb431a7ba25cbd6ab8a014beabcfd3b6226eac3e +size 17751 diff --git a/detail_png/Shaft_01729_diam.png b/detail_png/Shaft_01729_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0d5874fd3989fb92deb24c4be3f576e581f66d4d --- /dev/null +++ b/detail_png/Shaft_01729_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7604d35c3aa9ba0756589b5c60bfabe4345eb95524c6cdb69ead288736e5683 +size 18528 diff --git a/detail_png/Shaft_01729_length.png b/detail_png/Shaft_01729_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1ae819a1be9c01aa9c77c95a4deb84a69f486023 --- /dev/null +++ b/detail_png/Shaft_01729_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb73c28f8593ac290dc4536b4e626e49a80237c20368b75f285e9a9a83d9ae23 +size 15632 diff --git a/detail_png/Shaft_01729_title.png b/detail_png/Shaft_01729_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6815a85fa1bcf6dbe14ee2eeefe2e9006d0a944c --- /dev/null +++ b/detail_png/Shaft_01729_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:061293a7fa3885faae114847ee7784227dfb12aed0f9f0891a462354fbb94cca +size 14693 diff --git a/detail_png/Shaft_01733_diam.png b/detail_png/Shaft_01733_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..11ca6f912a6635627bbe67b548cb2b6e8dcda1d7 --- /dev/null +++ b/detail_png/Shaft_01733_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b319138cdc5f16e44ac3df58000483ea339376166612244588474cc49345a81 +size 28977 diff --git a/detail_png/Shaft_01733_length.png b/detail_png/Shaft_01733_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3f0c78ed5c191f770821724677e0eccbb0239f06 --- /dev/null +++ b/detail_png/Shaft_01733_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4dc1d25e51e979256ee00965c8e66fd55e1bfb59b69b723809b9bf1b7b9d3b6c +size 22721 diff --git a/detail_png/Shaft_01733_title.png b/detail_png/Shaft_01733_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4031dceb516ee4b33d0f61e3911b6e4bda0faca6 --- /dev/null +++ b/detail_png/Shaft_01733_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40ad5a9146bbbfab489bde46b86555acd8148d88b58d07a00cb1db4da78cf1f2 +size 23904 diff --git a/detail_png/Shaft_01735_diam.png b/detail_png/Shaft_01735_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6c6f1f0f2e7b71505cd40edce1a271cab9206fb9 --- /dev/null +++ b/detail_png/Shaft_01735_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1418cf22e0ef5822420ec42b336c7b2dcf443262cffa97780caeea3ff8a73172 +size 25497 diff --git a/detail_png/Shaft_01735_length.png b/detail_png/Shaft_01735_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4a33c95e02051a33c0b461c2af7d954b37348551 --- /dev/null +++ b/detail_png/Shaft_01735_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:375a9a098ac0226ac84757f042ea693b7db0919e3cf349e19264ecff4e9d77cb +size 18053 diff --git a/detail_png/Shaft_01735_title.png b/detail_png/Shaft_01735_title.png new file mode 100644 index 0000000000000000000000000000000000000000..68ad8bf42e9e4247264b0061ea55f11cd65134e3 --- /dev/null +++ b/detail_png/Shaft_01735_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa4a4d76979f1ae47b254399fabbfe63a537353c5392475fcc1def4214f2f223 +size 18221 diff --git a/detail_png/Shaft_01737_diam.png b/detail_png/Shaft_01737_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8759069628e0ab5a632c9ace5161c59fa8375e50 --- /dev/null +++ b/detail_png/Shaft_01737_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15dc796be554253c11c4033da0f1c589077a933f4bff313fdd91b68f9e36fbc7 +size 19685 diff --git a/detail_png/Shaft_01737_length.png b/detail_png/Shaft_01737_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8483fdf93e7dafc45172ef4250446f994511683a --- /dev/null +++ b/detail_png/Shaft_01737_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66e1422c4d0715a45312f251ecefb33fc3c99901082d65a0a54f0f9f16a80fa9 +size 16746 diff --git a/detail_png/Shaft_01737_title.png b/detail_png/Shaft_01737_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a2903ab1d7a629e87f72036d7eece50d67a65ddd --- /dev/null +++ b/detail_png/Shaft_01737_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b747e220558814d8a39d78a45b604a549581f3dd640387e664d69bbf21e6f7b4 +size 18111 diff --git a/detail_png/Shaft_01738_diam.png b/detail_png/Shaft_01738_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a96fbc8d31181c7239f1e01578275b797926b925 --- /dev/null +++ b/detail_png/Shaft_01738_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fda8ec03d6bc56fbbf0bac51800b5921814b79d9dc03a79ae604473933b6ca3 +size 21136 diff --git a/detail_png/Shaft_01738_length.png b/detail_png/Shaft_01738_length.png new file mode 100644 index 0000000000000000000000000000000000000000..55477034dda71aba6ddd070f839256d95b313b1f --- /dev/null +++ b/detail_png/Shaft_01738_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e46f598c5a01c5b40d8733ffad59b3bf65e49d4fd5bcf320ee2f3ab7676bc9a +size 23087 diff --git a/detail_png/Shaft_01738_title.png b/detail_png/Shaft_01738_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a4722128c5f476d2c2343c132c42bb2aaba0d2e0 --- /dev/null +++ b/detail_png/Shaft_01738_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d72335701b299294d3d0ffcaab841233bdf03883c2c80928cd3ae3d7581f27b +size 29521 diff --git a/detail_png/Shaft_01740_diam.png b/detail_png/Shaft_01740_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f772d9b5a8f0dc960b32a17ead6106de859f4e27 --- /dev/null +++ b/detail_png/Shaft_01740_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d7c93fd35b38d123a7dbd0c03e4f7a830e47bc2583c71fd32c1e7841489260b +size 20106 diff --git a/detail_png/Shaft_01740_length.png b/detail_png/Shaft_01740_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2335b3bf85244cdff4649e163685f0f1bfc40d07 --- /dev/null +++ b/detail_png/Shaft_01740_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98f4d308d274ccfa4a09bb487b745e66585bce047b20ce33f0250b76bd56baa4 +size 20633 diff --git a/detail_png/Shaft_01740_title.png b/detail_png/Shaft_01740_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8d635fce881fc4d367841595821d3a97a2d1f6c5 --- /dev/null +++ b/detail_png/Shaft_01740_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d54a5e4282d976b17087f3cdea846a27de07c432dfd00e4e559d19313d3bcdf8 +size 30562 diff --git a/detail_png/Shaft_01747_diam.png b/detail_png/Shaft_01747_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1ecf6885426cf207fa881c722ecab69e41d1094c --- /dev/null +++ b/detail_png/Shaft_01747_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b34578a9df01aef64a04483f0d69115412ca4f3e6dbbff36a6358e5ea21eb3ec +size 27724 diff --git a/detail_png/Shaft_01747_length.png b/detail_png/Shaft_01747_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c8349a9686b430ca396db71910102409bb93e6bc --- /dev/null +++ b/detail_png/Shaft_01747_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed89405962c1e87e2df4b73a8fe60955cceee11cd39ea72bd8f1fa927f077b86 +size 23122 diff --git a/detail_png/Shaft_01747_title.png b/detail_png/Shaft_01747_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7382b3ae33ce6d9f0e30f8ea9770f2b5d96c69ec --- /dev/null +++ b/detail_png/Shaft_01747_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7682a7bf32a98bef5a3cd77f9e8d25d3811069d83372f5b4815d290f3810611a +size 25135 diff --git a/detail_png/Shaft_01748_diam.png b/detail_png/Shaft_01748_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8e60d820913c71f355ea8371401d463414b62151 --- /dev/null +++ b/detail_png/Shaft_01748_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5ca79389865bf9f0c0fa6340a6d2893843c1cead0761177ecc8ccbb36860812 +size 26838 diff --git a/detail_png/Shaft_01748_length.png b/detail_png/Shaft_01748_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6b7589c1dd7fa6837b280c03f26fe6f4936147f5 --- /dev/null +++ b/detail_png/Shaft_01748_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7fa4ab20e107c78652ee4c3e718391f4fcab48020cd5ce3f8da53e8e1e1f914 +size 23958 diff --git a/detail_png/Shaft_01748_title.png b/detail_png/Shaft_01748_title.png new file mode 100644 index 0000000000000000000000000000000000000000..708275a908a1b44a81cda48c8e2d0baed1861772 --- /dev/null +++ b/detail_png/Shaft_01748_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:561aecda3027ec2dd406b19d387181d9d6b1afb410fc2f002e995056d2b90992 +size 30812 diff --git a/detail_png/Shaft_01749_diam.png b/detail_png/Shaft_01749_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a5839a760280e61124bc24b4b835bb645a4f9339 --- /dev/null +++ b/detail_png/Shaft_01749_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f233557d376b28d943edd8adbd89b224ebe6477865d420c3588d6e6b5aa62401 +size 37037 diff --git a/detail_png/Shaft_01749_length.png b/detail_png/Shaft_01749_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9fcf1a93da3bc624177cfe57bbedbbc2d464d6db --- /dev/null +++ b/detail_png/Shaft_01749_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:644baaeb87ea9aadd71209695b0cdf7d7dcfabf0da629b5d2014fe3d2aba7dd1 +size 47483 diff --git a/detail_png/Shaft_01749_title.png b/detail_png/Shaft_01749_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9e23f56b5748cf8bd514d0fa1a6df4f0a38b9e95 --- /dev/null +++ b/detail_png/Shaft_01749_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b8e39be02b20a0a8effeaa883233a0605ae01809193bd591a75211d8e23a31b +size 34825 diff --git a/detail_png/Shaft_01754_diam.png b/detail_png/Shaft_01754_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..163715c5e10a4016d959f9e0d5444089933e5580 --- /dev/null +++ b/detail_png/Shaft_01754_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb557ba722f0074c6a202e28b802d5c5b430b5a2f16e717df5511b7ba2c2f037 +size 33068 diff --git a/detail_png/Shaft_01754_length.png b/detail_png/Shaft_01754_length.png new file mode 100644 index 0000000000000000000000000000000000000000..79ef37c2eb78036b639c83198da3b753e6745924 --- /dev/null +++ b/detail_png/Shaft_01754_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:860aace4b6de6aedfb263fc301bee9bf12a8d4d73442aec9404f79fc7d52c73e +size 43932 diff --git a/detail_png/Shaft_01754_title.png b/detail_png/Shaft_01754_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1130c5bf9b1ce51ee01ec09b38de72464a16783d --- /dev/null +++ b/detail_png/Shaft_01754_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00f9b5f1172af2c5e3643eb5a77413c443970d887deb6bd25e5a686ac1c84e44 +size 28587 diff --git a/detail_png/Shaft_01763_diam.png b/detail_png/Shaft_01763_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ddaf53d137bb0b2f27560ea14cfdad0273a6893b --- /dev/null +++ b/detail_png/Shaft_01763_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d25e211fe41a77fc77603fc906cf8c6d7fb875ef832988e5dc160806ca184b6 +size 25808 diff --git a/detail_png/Shaft_01763_length.png b/detail_png/Shaft_01763_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e6e5be826afb6f83eec3867ac7cc668fed5bd65c --- /dev/null +++ b/detail_png/Shaft_01763_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a88b6dbf746507fc81a4d0a4f2925be38ef3538154554610328a183beed36444 +size 25596 diff --git a/detail_png/Shaft_01763_title.png b/detail_png/Shaft_01763_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cc378bf8220938c24b7f07504a4bd17115672038 --- /dev/null +++ b/detail_png/Shaft_01763_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:156a7d4261dca702ac36c2c7d075dbc3cf682ccaf245e9898255c8191e97ba17 +size 31680 diff --git a/detail_png/Shaft_01764_diam.png b/detail_png/Shaft_01764_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..039d84cba6dcf04620cbdedab89d9b86af4650ac --- /dev/null +++ b/detail_png/Shaft_01764_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a3dfbeeb6a61333cc78f0895ed9461d3bbb3e8b628916d8b92123a39f87305c +size 30198 diff --git a/detail_png/Shaft_01764_length.png b/detail_png/Shaft_01764_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ad954c13cf8225feac77d1184ad02635e6420565 --- /dev/null +++ b/detail_png/Shaft_01764_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac2fc5deb514d865a77ab64cac749063b012df2983cc2cccf1b6945eb7b7852c +size 30896 diff --git a/detail_png/Shaft_01764_title.png b/detail_png/Shaft_01764_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7d77e2639044d4724cfdaf1a2be7d13d6d98e5e3 --- /dev/null +++ b/detail_png/Shaft_01764_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f750773004d51cf77d5aaccb0fa97ed0f861744c8bf7c52c7a70c2850fdee8e0 +size 30779 diff --git a/detail_png/Shaft_01766_diam.png b/detail_png/Shaft_01766_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2c42b26c31469cf17d4186e3b6924b10ef136896 --- /dev/null +++ b/detail_png/Shaft_01766_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa7401a4f5a88c706eedabe889be8aa56dbf7a22ff777a5f65430ec0d529a03f +size 25019 diff --git a/detail_png/Shaft_01766_length.png b/detail_png/Shaft_01766_length.png new file mode 100644 index 0000000000000000000000000000000000000000..53e050846068e68da42d2875e47f55ddf1711e3a --- /dev/null +++ b/detail_png/Shaft_01766_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:444f161f90a1e8663f99dbe2b86307fd03eaeb4e8db7b4b7a7ff58ae00741e62 +size 22917 diff --git a/detail_png/Shaft_01766_title.png b/detail_png/Shaft_01766_title.png new file mode 100644 index 0000000000000000000000000000000000000000..07c855abca88fd4c1a4254341a571b3bffc97116 --- /dev/null +++ b/detail_png/Shaft_01766_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd78741872cf9131aac26a96ed29e28142229218d4a4cad77e94add7a3d89685 +size 26303 diff --git a/detail_png/Shaft_01768_diam.png b/detail_png/Shaft_01768_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d022cfd44b669c7e3b5ae89e1206607d855f8c60 --- /dev/null +++ b/detail_png/Shaft_01768_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f2ab8df7d51bec5ee70857cd3cbab9eac63f91ab3158ecdfd9b029cabe8fe5e +size 25252 diff --git a/detail_png/Shaft_01768_length.png b/detail_png/Shaft_01768_length.png new file mode 100644 index 0000000000000000000000000000000000000000..67bac48f18f84df2485a2a6d9a3cc344e6878e1d --- /dev/null +++ b/detail_png/Shaft_01768_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffe01bcef448f94e6089da2618b12632b6d6b166bb408f60283f57ac7e791a5c +size 23421 diff --git a/detail_png/Shaft_01768_title.png b/detail_png/Shaft_01768_title.png new file mode 100644 index 0000000000000000000000000000000000000000..64c4eac4688dc719edbf717b37d25a1b3134ac00 --- /dev/null +++ b/detail_png/Shaft_01768_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a0501a9c00015609f91faf0a13538080fa4f6512fe5c1bfda2c6e3a4deef17c +size 34833 diff --git a/detail_png/Shaft_01769_diam.png b/detail_png/Shaft_01769_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a4d18df56b878009ac02e3465092a18c933f3f2 --- /dev/null +++ b/detail_png/Shaft_01769_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87fe6318e920561df60a467b0c77d77bf71bf9aeeab418a2ea1a521bcde34df3 +size 33136 diff --git a/detail_png/Shaft_01769_length.png b/detail_png/Shaft_01769_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bac036a3003f157e701367421676ba133db047c5 --- /dev/null +++ b/detail_png/Shaft_01769_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d62abb4faf787c737c61154a6d18e8e5740d3dc3246414fcabd3e978641c3d9 +size 27847 diff --git a/detail_png/Shaft_01769_title.png b/detail_png/Shaft_01769_title.png new file mode 100644 index 0000000000000000000000000000000000000000..09e660eec24f501116403d686d05db3babb1bfb0 --- /dev/null +++ b/detail_png/Shaft_01769_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5793ba84438d6d8ed3c6c2dc9b62fc8a186db52302a297d2d0d6d4bc35ee49b3 +size 27997 diff --git a/detail_png/Shaft_01770_diam.png b/detail_png/Shaft_01770_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e1bc7f5ad92d9b5c53641489d332f0b67a633c9d --- /dev/null +++ b/detail_png/Shaft_01770_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64e17b7e936d87b4a493fea55559558d4d509064d2728e386d17eb32d772fd9d +size 33060 diff --git a/detail_png/Shaft_01770_length.png b/detail_png/Shaft_01770_length.png new file mode 100644 index 0000000000000000000000000000000000000000..78af2432190ced2d0827a82900d5155cfab84c7c --- /dev/null +++ b/detail_png/Shaft_01770_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ebe0a145550fa0d4353557bffe2d9588aa12a9775eaff5a152363ab2927ec4b +size 47653 diff --git a/detail_png/Shaft_01770_title.png b/detail_png/Shaft_01770_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6940b8c9f094a73526c67b7ed2d3a8e8ea97fdfb --- /dev/null +++ b/detail_png/Shaft_01770_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65478b2b6f1d33042611465013ace9f6b6621ba78b072ff61184b0230fce3030 +size 31134 diff --git a/detail_png/Shaft_01776_diam.png b/detail_png/Shaft_01776_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..32e09e4b6b28837693cbb1d066ff8d2964f86c62 --- /dev/null +++ b/detail_png/Shaft_01776_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:503077830fcffa6292f639144cd26c5225a106134dd0fc108083ac9f5aa84489 +size 19222 diff --git a/detail_png/Shaft_01776_length.png b/detail_png/Shaft_01776_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d1da766983bc26df54d1869f856761c88a6c6fc9 --- /dev/null +++ b/detail_png/Shaft_01776_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:498f23304ae3aeffe7f5b072bca02805dc009c9e81d50bca622437a800820d52 +size 15113 diff --git a/detail_png/Shaft_01776_title.png b/detail_png/Shaft_01776_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6e3b397790ceaed72d46a3dceea01b2a64600927 --- /dev/null +++ b/detail_png/Shaft_01776_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:476613522e1f0b43de8d8a8e7679010b7e54408c9dc46e53feed9ab4d2907d14 +size 15349 diff --git a/detail_png/Shaft_01777_diam.png b/detail_png/Shaft_01777_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c56e5e00b2654d07d8a16bbdac1109881f5d9d8 --- /dev/null +++ b/detail_png/Shaft_01777_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dff8ca0c09585ea9e786b61a943f7c1adab4673f64544bdba54c01fd3eb27312 +size 19501 diff --git a/detail_png/Shaft_01777_length.png b/detail_png/Shaft_01777_length.png new file mode 100644 index 0000000000000000000000000000000000000000..546154a818737022710903b6c2f7990d0cf12094 --- /dev/null +++ b/detail_png/Shaft_01777_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:362922a8387f2230edb9058037392c07419607e1cc854398b7a88876f8197853 +size 15804 diff --git a/detail_png/Shaft_01777_title.png b/detail_png/Shaft_01777_title.png new file mode 100644 index 0000000000000000000000000000000000000000..af2010748988f89e958e96028afdcf5dc4aa124a --- /dev/null +++ b/detail_png/Shaft_01777_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab32290c87afe2f71f3193c9497f7ddaee20a204dac88cd02fd199f5a01ccc37 +size 14628 diff --git a/detail_png/Shaft_01784_diam.png b/detail_png/Shaft_01784_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..40ad447d9a13517926473848b663837a9a3c6e56 --- /dev/null +++ b/detail_png/Shaft_01784_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c937fe43f089d7612c0da737dfe9100219cf5203d20811827f7c0ddb222d6a01 +size 30028 diff --git a/detail_png/Shaft_01784_length.png b/detail_png/Shaft_01784_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8661708fcd9f8d23aadf63379f2d7b9ad275e340 --- /dev/null +++ b/detail_png/Shaft_01784_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12fad104cdf7cc66f05e0e6339b6f96d3d4d4e988c9d80616726d6168543c08d +size 28821 diff --git a/detail_png/Shaft_01784_title.png b/detail_png/Shaft_01784_title.png new file mode 100644 index 0000000000000000000000000000000000000000..139a514c647f0f33c7638668c93b679cf099468e --- /dev/null +++ b/detail_png/Shaft_01784_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15f8e9a2b69913c88fe123ceee51d9ce0c1461355b25479a29f23ab896a7de7b +size 28579 diff --git a/detail_png/Shaft_01785_diam.png b/detail_png/Shaft_01785_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4760b6a21421472487a7fc6c220907f9abc0d4f2 --- /dev/null +++ b/detail_png/Shaft_01785_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8b58a29646cc4103dad82d43a0ae84100171f0f1c4cda3a95ecee9a431772de +size 35376 diff --git a/detail_png/Shaft_01785_length.png b/detail_png/Shaft_01785_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d952bb33f2292611d34330f51f053f711be21270 --- /dev/null +++ b/detail_png/Shaft_01785_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3701190baa022323053b01acf508c5db6e5334b436c0f16721b59a89bfe2e18c +size 44284 diff --git a/detail_png/Shaft_01785_title.png b/detail_png/Shaft_01785_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cc5f8724c0b7215aba72e5fc371314ec4cd933ac --- /dev/null +++ b/detail_png/Shaft_01785_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34838b30cd63c773994bd4381fd1f432f720a45cdbd3907f3e58733ef2e6dd34 +size 31997 diff --git a/detail_png/Shaft_01789_diam.png b/detail_png/Shaft_01789_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c7b36707db8895eae5739f37451ba6198e344f5f --- /dev/null +++ b/detail_png/Shaft_01789_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83cf85bc62129b2974b8ce445199f245c639a4cc27eb7e6d1bd464f10c4fc05e +size 18776 diff --git a/detail_png/Shaft_01789_length.png b/detail_png/Shaft_01789_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f530d90d72b9ebe60887d96b6941a7b8bb4864c7 --- /dev/null +++ b/detail_png/Shaft_01789_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7e15f49bc9d8ae368f69974881f40ab4f9059f5f25fbc2188cbd633f01b4536 +size 19622 diff --git a/detail_png/Shaft_01789_title.png b/detail_png/Shaft_01789_title.png new file mode 100644 index 0000000000000000000000000000000000000000..804ba3bb12276233a0ad6e1e2337e8f83c2fa5c6 --- /dev/null +++ b/detail_png/Shaft_01789_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3342f3cf110f9739c6e51d98bc251058c690aaa84d199f4004c23f5f26c1ce9e +size 34022 diff --git a/detail_png/Shaft_01791_diam.png b/detail_png/Shaft_01791_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c342b46f15c2e3c170779a2c74047c6a2efa216b --- /dev/null +++ b/detail_png/Shaft_01791_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50c675cdd32c8163310a8b732c749a4d77b3ee0877a122d3db55fbadb4c0c0bd +size 37134 diff --git a/detail_png/Shaft_01791_length.png b/detail_png/Shaft_01791_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b6392e5feb036b6a6bd6ea881f8eaad444d205e0 --- /dev/null +++ b/detail_png/Shaft_01791_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9d2fea3c705bade7e973498793efeacb74b6c6a1c67f4d33598a857d2b1ffc3 +size 46855 diff --git a/detail_png/Shaft_01791_title.png b/detail_png/Shaft_01791_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eed8d4ddae66eedc0afb676875dab869a3220818 --- /dev/null +++ b/detail_png/Shaft_01791_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d100be913272689977b1e53804f32123b8703a560f523d74138e785400bad2d7 +size 34342 diff --git a/detail_png/Shaft_01795_diam.png b/detail_png/Shaft_01795_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a4b5bb721b9cde298b01f8b29b609fbe6c0fe506 --- /dev/null +++ b/detail_png/Shaft_01795_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1302680c2560ea3ae74e58c6dd88acaede7f043ca5a5e5bacecf9894c099f9b7 +size 26871 diff --git a/detail_png/Shaft_01795_length.png b/detail_png/Shaft_01795_length.png new file mode 100644 index 0000000000000000000000000000000000000000..72b7a28026ed9ba2de5b950422ea1544e14a1c87 --- /dev/null +++ b/detail_png/Shaft_01795_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f729f5aa621927319dccf40d8b63b047324fe0575b54180c9eeecb8f72df97dd +size 32653 diff --git a/detail_png/Shaft_01795_title.png b/detail_png/Shaft_01795_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a9ff4d22ef0d591b8965816ff15b8c780f30380 --- /dev/null +++ b/detail_png/Shaft_01795_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:578faf69cd9009c3da249379e947dbb9f7e199fde0c219863322ed40a608abdd +size 29281 diff --git a/detail_png/Shaft_01798_diam.png b/detail_png/Shaft_01798_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..77d99ef605e5b809af5267eb67e2e0faa89da648 --- /dev/null +++ b/detail_png/Shaft_01798_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdde408a97d70ab69bde69e8232aea051b16f6f37a409fc3aaa85ffa4196b3da +size 31139 diff --git a/detail_png/Shaft_01798_length.png b/detail_png/Shaft_01798_length.png new file mode 100644 index 0000000000000000000000000000000000000000..03f3740958bdbcf7297d85c4713b1f2cd5cf0efb --- /dev/null +++ b/detail_png/Shaft_01798_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbd73aa7d8423cc9a11802954f206c722474077af6f8d1a44b440c2cc2324933 +size 39927 diff --git a/detail_png/Shaft_01798_title.png b/detail_png/Shaft_01798_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dbd5a63d5f8f6747b7ad811aa76b0cb7ad4a15ef --- /dev/null +++ b/detail_png/Shaft_01798_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7122c5cdd071211cd08618ae60e1de86ec9e8034323c8fcdb5e3d445f8c70384 +size 29296 diff --git a/detail_png/Shaft_01802_diam.png b/detail_png/Shaft_01802_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5082fe9be00893cc3004c7a8a6b10d77a4aa6ae1 --- /dev/null +++ b/detail_png/Shaft_01802_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa357193b7811e473398c4ed3a29e8714066017b25645aa500af310c71e5e84b +size 25980 diff --git a/detail_png/Shaft_01802_length.png b/detail_png/Shaft_01802_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bd33245fc5d32f273965676329d1d9c09cdeabac --- /dev/null +++ b/detail_png/Shaft_01802_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:955fc3555810a777eb39336a877cd2deffd977e8ce725a6759a647cdf8457222 +size 18466 diff --git a/detail_png/Shaft_01802_title.png b/detail_png/Shaft_01802_title.png new file mode 100644 index 0000000000000000000000000000000000000000..feaa77980f0287ae58a991bb45721db51f5af752 --- /dev/null +++ b/detail_png/Shaft_01802_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7816bc2601e39e0996aa9ef29ba2f1cb86a0bd1a4bc2870f9d5e2b3d31102134 +size 18850 diff --git a/detail_png/Shaft_01805_diam.png b/detail_png/Shaft_01805_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c1720e8fd35ceef2a57c9af50cec9fe760cf2052 --- /dev/null +++ b/detail_png/Shaft_01805_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbd593c575628943155847a63584905b60ede8af70ec32dfd1a415776d0850e8 +size 31953 diff --git a/detail_png/Shaft_01805_length.png b/detail_png/Shaft_01805_length.png new file mode 100644 index 0000000000000000000000000000000000000000..264dbfabd9f915e41d4d261488a26a3bbe363372 --- /dev/null +++ b/detail_png/Shaft_01805_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fd5a8fe34c3be5c5c4c879b401c625ec5f161970a0b0b165cd5b2ac39f5aa4c +size 42857 diff --git a/detail_png/Shaft_01805_title.png b/detail_png/Shaft_01805_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6b9ad8598f2f91769338cbe33eaa4de5183e5a3f --- /dev/null +++ b/detail_png/Shaft_01805_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31930434f0ef5a6c9325d5cbc891734a7cbe8299b6aabb3c8f128576a4f156f8 +size 29970 diff --git a/detail_png/Shaft_01807_diam.png b/detail_png/Shaft_01807_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..02f872c538cfb05e6fd6484936f3399fec23180d --- /dev/null +++ b/detail_png/Shaft_01807_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3031ede1a6a68cc481cc0c3f0212812ee520c5f1504c828cfb830a293543a9d0 +size 23894 diff --git a/detail_png/Shaft_01807_length.png b/detail_png/Shaft_01807_length.png new file mode 100644 index 0000000000000000000000000000000000000000..df9506c3fcf8c176aa2440273a908c6db46afa36 --- /dev/null +++ b/detail_png/Shaft_01807_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2782e9ab80e04ff4d31339106f66791a67117d0cda722ef833892b69d80744e +size 31138 diff --git a/detail_png/Shaft_01807_title.png b/detail_png/Shaft_01807_title.png new file mode 100644 index 0000000000000000000000000000000000000000..70890f737ae6e87d25f5da446b3d08f2d1a3bd12 --- /dev/null +++ b/detail_png/Shaft_01807_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1345e0f95f2c03a13616d587ea7f25c42b75cd75bfc9145e5af66b664473a63 +size 29491 diff --git a/detail_png/Shaft_01814_diam.png b/detail_png/Shaft_01814_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..240da0374c610fe9e5cad241c9927431ba11d467 --- /dev/null +++ b/detail_png/Shaft_01814_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:143a3a759011685f4a239e9a8a57ccf9a2317d2472e44aa02133ee3f57480697 +size 30436 diff --git a/detail_png/Shaft_01814_length.png b/detail_png/Shaft_01814_length.png new file mode 100644 index 0000000000000000000000000000000000000000..80ff64b8e3923b78f35ff9d1efcbd9e798831f6d --- /dev/null +++ b/detail_png/Shaft_01814_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eefc9ee074a8160f977384352b4f3766e1e679262444e2467b7f84aaf244d58d +size 25724 diff --git a/detail_png/Shaft_01814_title.png b/detail_png/Shaft_01814_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ec4e9c5891a4f24c2781626350c0b9b7ec71c67a --- /dev/null +++ b/detail_png/Shaft_01814_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de525ed28ffa378d6c8113a65f7d4bb8f2819ac8dfe5494c54264cbf45baa4e9 +size 27069 diff --git a/detail_png/Shaft_01819_diam.png b/detail_png/Shaft_01819_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d72981fa09bb7899f26ba63375a3cfa443831125 --- /dev/null +++ b/detail_png/Shaft_01819_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf140c80c03caf6834aac98776ce68a2eb392958d52f35db4bf9700009dba6df +size 28024 diff --git a/detail_png/Shaft_01819_length.png b/detail_png/Shaft_01819_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fdf3f364dcb82e6fc419c21e01ac96d58b212b07 --- /dev/null +++ b/detail_png/Shaft_01819_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3deeb2e755783f06f3cb8a8d664004866057ec682c041c3642170b0d924c9fd7 +size 24914 diff --git a/detail_png/Shaft_01819_title.png b/detail_png/Shaft_01819_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c8b00ab9d9b24a2c8b407deed0cb95673b281f65 --- /dev/null +++ b/detail_png/Shaft_01819_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4918fd5d25cc6ae8bd33bdd5858298a7480fa5b41f7b6fd0c880d5d230321da6 +size 31458 diff --git a/detail_png/Shaft_01825_diam.png b/detail_png/Shaft_01825_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6bd70f7f4e901ba9f77abeb8dbf5fbb28d25bbf0 --- /dev/null +++ b/detail_png/Shaft_01825_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d361665ed78ff57aabe5e228ae4fc4fc92761e9f1c592cfe30d6a6fe7e9b9f6 +size 19837 diff --git a/detail_png/Shaft_01825_length.png b/detail_png/Shaft_01825_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc1994e107601f24fb7a2a5ee5bb720cf0b59062 --- /dev/null +++ b/detail_png/Shaft_01825_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9fd105fd7d5c3df2405c20c30904891acee95dac4e2e72857a1ed526b14a0d9 +size 22341 diff --git a/detail_png/Shaft_01825_title.png b/detail_png/Shaft_01825_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d36d19f1373f59f7ad9994443a9cb826f9ae0b14 --- /dev/null +++ b/detail_png/Shaft_01825_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18e4777fed19e9d1dcfb8518fd50e252446e8ef35c61fb23b4ab62ceb40632c2 +size 31915 diff --git a/detail_png/Shaft_01827_diam.png b/detail_png/Shaft_01827_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..17cf4e537efa32614a96df5600afd5a8bc21d067 --- /dev/null +++ b/detail_png/Shaft_01827_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d093f1f5df53b3cd1e83f130aac9d1fcfa1a2acd176e708b9f81e280938b0c1e +size 33134 diff --git a/detail_png/Shaft_01827_length.png b/detail_png/Shaft_01827_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d8b52965407477a0cc9e3eac7b3951a40e63ab49 --- /dev/null +++ b/detail_png/Shaft_01827_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f49beb5b819148422bd7317c561e2d7779616104c8d0aa14944c69ba362e72ea +size 26994 diff --git a/detail_png/Shaft_01827_title.png b/detail_png/Shaft_01827_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b9743a1abaaa3843f2cf998c52604aaf4b9be1da --- /dev/null +++ b/detail_png/Shaft_01827_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b204d411d840675a828173e1ed6ca01bb5d21131478b8f673cab5a45b8090229 +size 19549 diff --git a/detail_png/Shaft_01836_diam.png b/detail_png/Shaft_01836_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8c9ba9163a9e6045a1f33200aa2e6612ebb60f1e --- /dev/null +++ b/detail_png/Shaft_01836_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:025e05b9787e3ff27dc9d6e55fd800317ba8b26de41a6fdc23efe4d3873c9584 +size 25962 diff --git a/detail_png/Shaft_01836_length.png b/detail_png/Shaft_01836_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c7414325e926a797ccc27be14c5c46043b6c0799 --- /dev/null +++ b/detail_png/Shaft_01836_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bae40490cdd33ff8126e961c13f2043c1d399aca2029958a632cd99f39fc0e3 +size 25165 diff --git a/detail_png/Shaft_01836_title.png b/detail_png/Shaft_01836_title.png new file mode 100644 index 0000000000000000000000000000000000000000..019f4847cd0839ba30e171061e40b7f971fac233 --- /dev/null +++ b/detail_png/Shaft_01836_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59b73174c7ec0ae5d01e2d6590d84796e6d0a86c5820c3368a45e5e2bb38d898 +size 30013 diff --git a/detail_png/Shaft_01838_diam.png b/detail_png/Shaft_01838_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f7e5122fba8017e48a967827ae9678888ed9c13a --- /dev/null +++ b/detail_png/Shaft_01838_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43b79cc9b69a8b4fc751845c866da6f65c716e9feb7ccf7bebcf17fc2e47dc61 +size 36747 diff --git a/detail_png/Shaft_01838_length.png b/detail_png/Shaft_01838_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3942ada624570137741e4c5f2768614ef69dbb2d --- /dev/null +++ b/detail_png/Shaft_01838_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f6328962edf145747739faf5b4e5b4cf5d0098d7c041f48c46a12fa5b48b10e +size 48548 diff --git a/detail_png/Shaft_01838_title.png b/detail_png/Shaft_01838_title.png new file mode 100644 index 0000000000000000000000000000000000000000..66e099b16d5ca0ddea1e660e576f5c685a3e1698 --- /dev/null +++ b/detail_png/Shaft_01838_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5847a00217471be1a626d152639f80fae360f6a348ea7a82e736bddb335a84e5 +size 30202 diff --git a/detail_png/Shaft_01840_diam.png b/detail_png/Shaft_01840_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aa2dce67630d7568b7bce1907edde4809706bdd8 --- /dev/null +++ b/detail_png/Shaft_01840_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2c14824f78370a9b95fc9ed54758a5aebc2d1197eeacef95f94947c751be7d0 +size 25668 diff --git a/detail_png/Shaft_01840_length.png b/detail_png/Shaft_01840_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0c773480c096f7f60f1c7bd6531d9ed689189117 --- /dev/null +++ b/detail_png/Shaft_01840_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e062d8f57deb87445d9b8f31a68dd954b5e12da2419af2c1319f4287adbff0c5 +size 28761 diff --git a/detail_png/Shaft_01840_title.png b/detail_png/Shaft_01840_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1aca935d576e90b8143113771cc8be6835c24a3a --- /dev/null +++ b/detail_png/Shaft_01840_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62a0d26ff651b03aace09be5c0a29ca425011afd5adb7cfcb086a2e9c71617fe +size 31636 diff --git a/detail_png/Shaft_01847_diam.png b/detail_png/Shaft_01847_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5f9dab9d030d3544e6925ab4594862090bbd7f30 --- /dev/null +++ b/detail_png/Shaft_01847_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf1a8d275391920784d58e474f19d32ee5dd1a38baaa181ca908bd2ebf628c7e +size 20534 diff --git a/detail_png/Shaft_01847_length.png b/detail_png/Shaft_01847_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c2f54ac2a57cc46406e8e61c7058b66d8703f4be --- /dev/null +++ b/detail_png/Shaft_01847_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b6b7c8855fc045d047e017aacbfe01c7e1cc8318db5911e29f811f16e38c7b6 +size 19241 diff --git a/detail_png/Shaft_01847_title.png b/detail_png/Shaft_01847_title.png new file mode 100644 index 0000000000000000000000000000000000000000..89ee6b81bac72f8a5917d51912178443901c16f7 --- /dev/null +++ b/detail_png/Shaft_01847_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb40ff24358b389cc8ea015ab5d8889c240c52e1d517598b5aa7a2f805a12f81 +size 16599 diff --git a/detail_png/Shaft_01848_diam.png b/detail_png/Shaft_01848_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2ccf6202d7d676490ed319c6766709887e37543a --- /dev/null +++ b/detail_png/Shaft_01848_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8382047ee1ac3bcac4965e2d024f0c056e91d02c9d6aa198d230b45ffdf661e5 +size 24713 diff --git a/detail_png/Shaft_01848_length.png b/detail_png/Shaft_01848_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d8072aef6cda4e083e308da711962205e2e11631 --- /dev/null +++ b/detail_png/Shaft_01848_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88bf80508a03c67620fe3134edaae1a05ba730ebfae62070b4e34e691e90afc0 +size 20244 diff --git a/detail_png/Shaft_01848_title.png b/detail_png/Shaft_01848_title.png new file mode 100644 index 0000000000000000000000000000000000000000..17e8d55dfc81a028e2792525895380659923f683 --- /dev/null +++ b/detail_png/Shaft_01848_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46b6f3db8ce15e45c41fb632b48676daabb3ed32bc89f25add1b0ad2c174eb58 +size 18684 diff --git a/detail_png/Shaft_01849_diam.png b/detail_png/Shaft_01849_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..07f3b57451f47cc2e53ec510009ae27452824eb4 --- /dev/null +++ b/detail_png/Shaft_01849_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12ddf0417ab679f15e3d9054926f691842dda983990869af2fdf4d2a22b99087 +size 34411 diff --git a/detail_png/Shaft_01849_length.png b/detail_png/Shaft_01849_length.png new file mode 100644 index 0000000000000000000000000000000000000000..06e13887286545ce6df6a2dd28b37c1aabf701a3 --- /dev/null +++ b/detail_png/Shaft_01849_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7919373787a53a4095e57e709068d43e43fb2a7f9ae327e68d76d827928cfc57 +size 34473 diff --git a/detail_png/Shaft_01849_title.png b/detail_png/Shaft_01849_title.png new file mode 100644 index 0000000000000000000000000000000000000000..677722f878031f06b09e11b0ab959b229e4d40db --- /dev/null +++ b/detail_png/Shaft_01849_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c06a5d3028c74e161de793fb2ed44ba8066d6459923fcbd5ca5e0d56699e80e7 +size 32016 diff --git a/detail_png/Shaft_01851_diam.png b/detail_png/Shaft_01851_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aca9060fdc80e553c1203969c94e9ed6da14e99f --- /dev/null +++ b/detail_png/Shaft_01851_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ac874fc4abebc518ce992a4168f363315ab9c93d4edf8380891a4518e395edb +size 24845 diff --git a/detail_png/Shaft_01851_length.png b/detail_png/Shaft_01851_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c602317fd915b60ad41536abded05fb2f61eb8b7 --- /dev/null +++ b/detail_png/Shaft_01851_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31f5514d72fc721aa3238ecc800aeca8daf33736196b54f6635e815b4ebb16f4 +size 21553 diff --git a/detail_png/Shaft_01851_title.png b/detail_png/Shaft_01851_title.png new file mode 100644 index 0000000000000000000000000000000000000000..035a996dcdd4cce9c59c045b5c379e325323dbf7 --- /dev/null +++ b/detail_png/Shaft_01851_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aba9ade5d6f908d5aa51040fe2ff968398d9effaa1d35ed154c41d6e07606b19 +size 27814 diff --git a/detail_png/Shaft_01852_diam.png b/detail_png/Shaft_01852_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4b5b9043562ab9e7458e43e517b8d7152b05d193 --- /dev/null +++ b/detail_png/Shaft_01852_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09eb025928cdecc08a1b7e6a3062723512b44b7e992dbc25d988fcd7ab14181e +size 32059 diff --git a/detail_png/Shaft_01852_length.png b/detail_png/Shaft_01852_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b72053f965186cab21aa0e3aba2cd350c22833c3 --- /dev/null +++ b/detail_png/Shaft_01852_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81958ed76345524d737193f1ae9462708d29c7ae82f612d86f29b02427260180 +size 38987 diff --git a/detail_png/Shaft_01852_title.png b/detail_png/Shaft_01852_title.png new file mode 100644 index 0000000000000000000000000000000000000000..84db12e0668278d7c621e16274b7ffaaf5811e00 --- /dev/null +++ b/detail_png/Shaft_01852_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b7c108a94fa7da3449ce3ba7588041ec1ae8c66e79daa587ad08639bd3731cd +size 35511 diff --git a/detail_png/Shaft_01857_diam.png b/detail_png/Shaft_01857_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d11ca88c0ad0ec70fca68ea219cd928a34dd3e45 --- /dev/null +++ b/detail_png/Shaft_01857_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fbc17e3695b9da383d0ed3eee056df4beb9c01162f0182618bd5e871d6843b7 +size 28943 diff --git a/detail_png/Shaft_01857_length.png b/detail_png/Shaft_01857_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0a244686142a93e8cb9eec14dd88f73d76c8e808 --- /dev/null +++ b/detail_png/Shaft_01857_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0340c86313a58f1c57fa210db47a309b1d388de959af16a4c16fdca89cce663e +size 39622 diff --git a/detail_png/Shaft_01857_title.png b/detail_png/Shaft_01857_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fb15e4dff955666ddc680943257afd2c5a43b8bf --- /dev/null +++ b/detail_png/Shaft_01857_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bcd49e0f0601d17dd95451743fc41b784622d52ed6435a8190e79bd1b58f31f +size 29472 diff --git a/detail_png/Shaft_01862_diam.png b/detail_png/Shaft_01862_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3d429564c1d06cdd2db8b1d7ac0ab5b141216e3a --- /dev/null +++ b/detail_png/Shaft_01862_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99389d1480733fc870aaf89060bec286db64d71c2f5f41831e96f6971140e378 +size 19992 diff --git a/detail_png/Shaft_01862_length.png b/detail_png/Shaft_01862_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c72023e1105ccd4205784c442f57e10c0762971 --- /dev/null +++ b/detail_png/Shaft_01862_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a3b6876948511c44e6bb063ae8c2cab6bf987b54592f4783665a72066b358aa +size 16399 diff --git a/detail_png/Shaft_01862_title.png b/detail_png/Shaft_01862_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f019663b29a21aab2c36504fe89a7878e8a426b7 --- /dev/null +++ b/detail_png/Shaft_01862_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51630cc62a8cd09930af7edec63b0c5507489c2cb9849ad729e38281a9ba3b42 +size 16744 diff --git a/detail_png/Shaft_01864_diam.png b/detail_png/Shaft_01864_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7b5d87aee09dcb2ed767509700ce03f37598eea3 --- /dev/null +++ b/detail_png/Shaft_01864_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7f1df0158c5e34e19f26e8a3d44a33d9257f4ec619fa8d89b3ebef827d04aea +size 18755 diff --git a/detail_png/Shaft_01864_length.png b/detail_png/Shaft_01864_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c29658a6a3b24f08f7fc4643edd8a4c90eecbdc6 --- /dev/null +++ b/detail_png/Shaft_01864_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7deb26a7511c02cdd48ac888dd544cc35eaf6b078ec1b4ecbff1c844ed35c3e +size 16949 diff --git a/detail_png/Shaft_01864_title.png b/detail_png/Shaft_01864_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a22f6f64b1c7df2ac2e60a951578c6cd1d916b4b --- /dev/null +++ b/detail_png/Shaft_01864_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e11843a9fed19d7e94011fcdc1631c62b898eabe10492ff8d6e786d56fb898b9 +size 18844 diff --git a/detail_png/Shaft_01865_diam.png b/detail_png/Shaft_01865_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..972bbbab1ad6c4d7747cf66ed10ec057bbfae896 --- /dev/null +++ b/detail_png/Shaft_01865_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b52d94234d44fa39c2e78058bff4e7cb0b5d638c38bd2bec08f429ac346ac5a6 +size 36119 diff --git a/detail_png/Shaft_01865_length.png b/detail_png/Shaft_01865_length.png new file mode 100644 index 0000000000000000000000000000000000000000..be3e8726b78670187783529d48c3503ee2ffa8ad --- /dev/null +++ b/detail_png/Shaft_01865_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962cd4df0218b7d4f5f449823a91bd41109cb451c9cf4849255d5d131b3ebba0 +size 32676 diff --git a/detail_png/Shaft_01865_title.png b/detail_png/Shaft_01865_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d7f51d6c38e6b59c45cc4a3660fa6cc8cf62e150 --- /dev/null +++ b/detail_png/Shaft_01865_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cf64af8111afb470d735599a76c4ecf7340c2252963fec1fc9f5aa78b16e615 +size 32192 diff --git a/detail_png/Shaft_01867_diam.png b/detail_png/Shaft_01867_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dc9a97e44e8cedd82fbe0661b049cb4e2cf13ae3 --- /dev/null +++ b/detail_png/Shaft_01867_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fc6bbc7694d6deb6db9e85dd69447d6023be57dbd3a0a6dbeb43e287a7c35bb +size 26216 diff --git a/detail_png/Shaft_01867_length.png b/detail_png/Shaft_01867_length.png new file mode 100644 index 0000000000000000000000000000000000000000..451465c7a15c85d144d60f8f021d46eee17fe0ff --- /dev/null +++ b/detail_png/Shaft_01867_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4993a7079dcaa96a881fd56e07e2b2d2211403f9ce6ead24fc2dc2a92331de0 +size 24566 diff --git a/detail_png/Shaft_01867_title.png b/detail_png/Shaft_01867_title.png new file mode 100644 index 0000000000000000000000000000000000000000..535b5deaa803fcc057c559b4d701932790507073 --- /dev/null +++ b/detail_png/Shaft_01867_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27ea4889cc82a97004db9eed1a3d11ac9d2f91d8e45770c9b124e118cd6f876a +size 29552 diff --git a/detail_png/Shaft_01868_diam.png b/detail_png/Shaft_01868_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a66bde48b4fb0b59c052101538b779f0a98ee68 --- /dev/null +++ b/detail_png/Shaft_01868_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2418a904f71adf044b9d02e437379bb7bd0e8570a811387d73b9c71ac0e3476d +size 30438 diff --git a/detail_png/Shaft_01868_length.png b/detail_png/Shaft_01868_length.png new file mode 100644 index 0000000000000000000000000000000000000000..afb98872e3900a23265d57defc9e84c9c51e3483 --- /dev/null +++ b/detail_png/Shaft_01868_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25ba420d928887b051192e348fc666fe73dda4a06ee4bf29e57634f0c42c5c49 +size 35789 diff --git a/detail_png/Shaft_01868_title.png b/detail_png/Shaft_01868_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c19b23cfc95c1163a1e96d19e03a10b12896e12c --- /dev/null +++ b/detail_png/Shaft_01868_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8801996a34f7524eb6d2ac3ef01c9e6d45cb905a19288b65566d8e69466f7ff0 +size 29966 diff --git a/detail_png/Shaft_01869_diam.png b/detail_png/Shaft_01869_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1534338f7ce3ed3688b9bef872ba710a92c98dba --- /dev/null +++ b/detail_png/Shaft_01869_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eeb640e3a5a8300b7aad4aaa18f2d9c51a92409665395c07b3c6e437a177f263 +size 37870 diff --git a/detail_png/Shaft_01869_length.png b/detail_png/Shaft_01869_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6ca9654f7db12304689792984f01a23e39b39708 --- /dev/null +++ b/detail_png/Shaft_01869_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef1b1a3840e3d02a55cac065735788bf017f46c8fe57952bd1db9adc6c79f725 +size 53935 diff --git a/detail_png/Shaft_01869_title.png b/detail_png/Shaft_01869_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42b3011577f736a16e76f1e1769c00a8e32f230b --- /dev/null +++ b/detail_png/Shaft_01869_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ac16c533468d8d2ec6f8b04814780f5af5fb14e199fd795d3955392aa43e18f +size 30461 diff --git a/detail_png/Shaft_01874_diam.png b/detail_png/Shaft_01874_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..001adbd2e8b2076dcd4143ed4e4e357841efd178 --- /dev/null +++ b/detail_png/Shaft_01874_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4211f596e440842fe71fe6f60beb999dfdb8df375b345f9620b8f7fee0ad5d5b +size 19569 diff --git a/detail_png/Shaft_01874_length.png b/detail_png/Shaft_01874_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dfc1f706ab935560fe66bfebb2617fd8c926fd4b --- /dev/null +++ b/detail_png/Shaft_01874_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efe8cc55502eb97fce715d802794a6821ee96c9825e9ca70aa6b85ab247221b3 +size 15397 diff --git a/detail_png/Shaft_01874_title.png b/detail_png/Shaft_01874_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a4a7f7dce56d7b92933a4d957896c83bca307dc0 --- /dev/null +++ b/detail_png/Shaft_01874_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92d78c203864427852d35a032a56fb1ee6c94c0f79d1c9590a687b67e74357df +size 21443 diff --git a/detail_png/Shaft_01877_diam.png b/detail_png/Shaft_01877_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4cd08eeda36a486070f51e565f8c02b80eb30464 --- /dev/null +++ b/detail_png/Shaft_01877_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e15c64ec6bcbf96b6059eafc27ff5a1059594118e66060e18c11c8b148ab1faf +size 18566 diff --git a/detail_png/Shaft_01877_length.png b/detail_png/Shaft_01877_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bc67b66a4e6e8b344fd5d725d56a5a9052e3f05a --- /dev/null +++ b/detail_png/Shaft_01877_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a834828504b89444f04412a24ede0f7581cb447238d37359e9bc71192d415eed +size 22486 diff --git a/detail_png/Shaft_01877_title.png b/detail_png/Shaft_01877_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5001e1df6809d28087204684b5ff96be144a4042 --- /dev/null +++ b/detail_png/Shaft_01877_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:846bd82355f125eb97eeba2e7e6961943728825258f5a5179977be20a1168c80 +size 30969 diff --git a/detail_png/Shaft_01878_diam.png b/detail_png/Shaft_01878_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a34f4302b750427af78f0d0b1728fffb7413cd7 --- /dev/null +++ b/detail_png/Shaft_01878_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e619a414a897a0c9d3e85f519e93c11b81b727426865c5719d962259cc7b915 +size 27034 diff --git a/detail_png/Shaft_01878_length.png b/detail_png/Shaft_01878_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eea6a897e663135ec9fc687e50fcb92d94e806d2 --- /dev/null +++ b/detail_png/Shaft_01878_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbb389c509cdf0e4de98602954c9a8bb3587f344fc27a25021fe12de59f74b24 +size 31731 diff --git a/detail_png/Shaft_01878_title.png b/detail_png/Shaft_01878_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4485074f86811ddc43ce2b2cdcf24a02a6628e71 --- /dev/null +++ b/detail_png/Shaft_01878_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3924cf99e12d0eb68ef333d5bc6f8144e5193dd35164e28ee41124e0e30339e0 +size 29104 diff --git a/detail_png/Shaft_01885_diam.png b/detail_png/Shaft_01885_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..07b22b1f40de8dbc79a67c08f539fc4bc9f7ad45 --- /dev/null +++ b/detail_png/Shaft_01885_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abe95e3b6a2b02d117a56372332547db65ec7918be0d59501e3f1c638d9ff1a9 +size 20348 diff --git a/detail_png/Shaft_01885_length.png b/detail_png/Shaft_01885_length.png new file mode 100644 index 0000000000000000000000000000000000000000..599d1e016e0ddfc562451ca6d48f71c9c9526479 --- /dev/null +++ b/detail_png/Shaft_01885_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f9ecca35c845d52b817946b20adaec4d7d2a2aa1650f077e19e6d2fd2e01a9c +size 25588 diff --git a/detail_png/Shaft_01885_title.png b/detail_png/Shaft_01885_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5b42cf0e4461fda8b5cc750a7537299c950fcdb6 --- /dev/null +++ b/detail_png/Shaft_01885_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef7f5d939ad5dcbfebf38ef6d3dc8433c9c823f0907e2be882522171e355ecfe +size 32520 diff --git a/detail_png/Shaft_01887_diam.png b/detail_png/Shaft_01887_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..795f60b6ca0e9a3670160ee8fe17b007f6f64660 --- /dev/null +++ b/detail_png/Shaft_01887_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1ce28e4bdd5cc9cee4b4a89257ecbf6c1dc7a86f3b88692c45dc3674b604d13 +size 25762 diff --git a/detail_png/Shaft_01887_length.png b/detail_png/Shaft_01887_length.png new file mode 100644 index 0000000000000000000000000000000000000000..10dbf57913157ef0cfd688e2b05de165c02f2d43 --- /dev/null +++ b/detail_png/Shaft_01887_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2827215c66953db9472bcfc35e27637e1e29afc79a05a531d8272425f526c7c +size 34190 diff --git a/detail_png/Shaft_01887_title.png b/detail_png/Shaft_01887_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6621c86bf49f6fa5eb5b06ddd458569ef31afd2b --- /dev/null +++ b/detail_png/Shaft_01887_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e9ccde387f243b546e600cce6a4b2090310cf5cbc24e9361984ca508ae489e2 +size 29390 diff --git a/detail_png/Shaft_01889_diam.png b/detail_png/Shaft_01889_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..22de8b25de34100382f16e682e1772fbbb4717af --- /dev/null +++ b/detail_png/Shaft_01889_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85b95dd1cedc853e553144d0450ac170d821f3a6dfb9f5d9c9155d3b8980f18c +size 25530 diff --git a/detail_png/Shaft_01889_length.png b/detail_png/Shaft_01889_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8049e3c3c8ebd838638e54422eb156edbaaf8473 --- /dev/null +++ b/detail_png/Shaft_01889_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33b3e61b3a29875f650ca4551ae6854be4a22b5d8f2637af045514adac96eefe +size 32281 diff --git a/detail_png/Shaft_01889_title.png b/detail_png/Shaft_01889_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ff7e8021ec8dc5610a463d479b72d91e13d3aef8 --- /dev/null +++ b/detail_png/Shaft_01889_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfaa279d9c087e34f8505d95bdec71442a9cf85724bda27b42143919f4f54045 +size 30049 diff --git a/detail_png/Shaft_01890_diam.png b/detail_png/Shaft_01890_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..964edff94e286bcc61376a873575d1581548acdf --- /dev/null +++ b/detail_png/Shaft_01890_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0357f03c73ce4961e63e042550748c924d3559a741cbfc9adb757bc83e18ad2e +size 29750 diff --git a/detail_png/Shaft_01890_length.png b/detail_png/Shaft_01890_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eba0ab7047ee48f254102f1bf856a9c3f3f7fe2f --- /dev/null +++ b/detail_png/Shaft_01890_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb5d953581b3ccfc41ee1deeed9392cce033d3bfff99380b8c5473da6142b55e +size 41885 diff --git a/detail_png/Shaft_01890_title.png b/detail_png/Shaft_01890_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6bcfad3b7ce71fb3114b9afe0ed161777f183e6d --- /dev/null +++ b/detail_png/Shaft_01890_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e6911346f2c05eea1c6dee1e02cb8a237576365a9b5e3bffb0b39af71fed96e +size 33156 diff --git a/detail_png/Shaft_01891_diam.png b/detail_png/Shaft_01891_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2312a140987b3186fc0253b771c4f09db5c2f904 --- /dev/null +++ b/detail_png/Shaft_01891_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c889ac33d0989f9154f4d0d7739b799afba98f333086da4305ad854e9e88fb0 +size 34974 diff --git a/detail_png/Shaft_01891_length.png b/detail_png/Shaft_01891_length.png new file mode 100644 index 0000000000000000000000000000000000000000..38798bce128d0d05e9494ee01ac5a2175321dcbc --- /dev/null +++ b/detail_png/Shaft_01891_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:046700a09e684611caea873e4827c9fcc7e7be06756e9abdbeefcb7338189f0a +size 51150 diff --git a/detail_png/Shaft_01891_title.png b/detail_png/Shaft_01891_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3226b7d57b1dd9826f1783d19f18112bbb516e65 --- /dev/null +++ b/detail_png/Shaft_01891_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb90be008d315968df7c411bf4ba35f31fd182860cc620bc36195d18ab455227 +size 29338 diff --git a/detail_png/Shaft_01899_diam.png b/detail_png/Shaft_01899_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2378e820c08262930fe3215f87b6c93e21cc6184 --- /dev/null +++ b/detail_png/Shaft_01899_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:044f502cb00b607ab979e90b9299b00009992a0dba483ad91ac23257f72ba44f +size 19742 diff --git a/detail_png/Shaft_01899_length.png b/detail_png/Shaft_01899_length.png new file mode 100644 index 0000000000000000000000000000000000000000..75836348bf7e04a794ff97b47a14ddb0e712f1b0 --- /dev/null +++ b/detail_png/Shaft_01899_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c633c58e5f55340a06a8ddeddc0236d465a7bb2b3b1ecb97a6872d8149b2c2ca +size 17657 diff --git a/detail_png/Shaft_01899_title.png b/detail_png/Shaft_01899_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f327e0aeb3a191f7e531853b48964109129ea2aa --- /dev/null +++ b/detail_png/Shaft_01899_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7dddf015dfef52e7d3ef488dc754bd08bab99c415f29211037b5fdd0e945eb00 +size 18784 diff --git a/detail_png/Shaft_01900_diam.png b/detail_png/Shaft_01900_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..230475979b4cc3b1676d5469d760b442872ece23 --- /dev/null +++ b/detail_png/Shaft_01900_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55ff1c5136d349a1db6cfb744487de3e80e4266611603b03def26292ac5c0dfe +size 37786 diff --git a/detail_png/Shaft_01900_length.png b/detail_png/Shaft_01900_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1c7a0af96f47cc815119d46c1e0368194e9e1e52 --- /dev/null +++ b/detail_png/Shaft_01900_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3d70d4af61641c2814d09403a4ca5ff10823c2ffd6d200b280a04c7d5217c2d +size 38954 diff --git a/detail_png/Shaft_01900_title.png b/detail_png/Shaft_01900_title.png new file mode 100644 index 0000000000000000000000000000000000000000..066baa89d1cc53fe9995eb91e17c57231c3592f6 --- /dev/null +++ b/detail_png/Shaft_01900_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15f8474b7481714bae76b82e3b6f2443d0f10319ad0bc7af964cddb80ba0f6e1 +size 29887 diff --git a/detail_png/Shaft_01903_diam.png b/detail_png/Shaft_01903_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e42fd0c3128ec61d8231b347cbcf3a6a5f3dfcbe --- /dev/null +++ b/detail_png/Shaft_01903_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19c606ba55c8511931ac6814fb360a97cca42acade7b52c12c488c47d702b714 +size 28134 diff --git a/detail_png/Shaft_01903_length.png b/detail_png/Shaft_01903_length.png new file mode 100644 index 0000000000000000000000000000000000000000..43e5418f265be97f98fb5ef2ff23af9401c316a6 --- /dev/null +++ b/detail_png/Shaft_01903_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1d21210fdba042f8167700b61e8da3f894595a520565bef5e6aa7d18ade6b39 +size 38981 diff --git a/detail_png/Shaft_01903_title.png b/detail_png/Shaft_01903_title.png new file mode 100644 index 0000000000000000000000000000000000000000..02c12139cddf34a23e5b4e0d4ce65fccba5f529b --- /dev/null +++ b/detail_png/Shaft_01903_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d48edd1adc0a86488bfcf7cecfc2bac7b4e0d440fbd79c20dfb9c472771e884 +size 29712 diff --git a/detail_png/Shaft_01906_diam.png b/detail_png/Shaft_01906_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..adbc2f2f21301e26c83c5bd2ea3038a282cef19e --- /dev/null +++ b/detail_png/Shaft_01906_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f0515bc6565a3a8a3a5995b3939eb9e376af07af908866f427ffba3f681a45e +size 25549 diff --git a/detail_png/Shaft_01906_length.png b/detail_png/Shaft_01906_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1704bbf57a2c0aee489c58c7d64ea96106795a09 --- /dev/null +++ b/detail_png/Shaft_01906_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fefbde8e37e3d53fab3b65e2bc9be29695a5d44e8c739a3878503d591f0e915 +size 31243 diff --git a/detail_png/Shaft_01906_title.png b/detail_png/Shaft_01906_title.png new file mode 100644 index 0000000000000000000000000000000000000000..25e8a3270b033988f4993a51ad037405806f8027 --- /dev/null +++ b/detail_png/Shaft_01906_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1263d30fb35ab58f4d8c6a384b8f23540248826f785fb53849eec342caad7091 +size 32225 diff --git a/detail_png/Shaft_01908_diam.png b/detail_png/Shaft_01908_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..301ca0fb0ba4c6155825880e333a3a55a06423b0 --- /dev/null +++ b/detail_png/Shaft_01908_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5094a9366f7bbcdef4deebca9e15899eba8e9e599653d9d1034fbba82110251e +size 27275 diff --git a/detail_png/Shaft_01908_length.png b/detail_png/Shaft_01908_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e595a5aedf8f3ff5401bf32bf14bdd2cd4fe6f9f --- /dev/null +++ b/detail_png/Shaft_01908_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d8a42fa03433ed5b46d516e39e8448adfe4f93f745a986be399b39ae356c329 +size 38895 diff --git a/detail_png/Shaft_01908_title.png b/detail_png/Shaft_01908_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c16ed30df6b56aed0403670c09fd9b38835d9e23 --- /dev/null +++ b/detail_png/Shaft_01908_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:239f6922782a525187e5887402d447cab9deaad854b5058a28af93684f644605 +size 30683 diff --git a/detail_png/Shaft_01912_diam.png b/detail_png/Shaft_01912_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6886e7a28f0d2537b9a410babcd4d51b3a9787bd --- /dev/null +++ b/detail_png/Shaft_01912_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40897a2b22b9de53fa52b3e1d987a463a63457630e9c6f25c26b6b3eeab52e39 +size 30436 diff --git a/detail_png/Shaft_01912_length.png b/detail_png/Shaft_01912_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4590f4e9780daf6e10330f6363c9848abcdb4f9f --- /dev/null +++ b/detail_png/Shaft_01912_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6318c79ebbb88de0c3f2909d8ccc8194b355df125edf787491c939634e76f65 +size 44240 diff --git a/detail_png/Shaft_01912_title.png b/detail_png/Shaft_01912_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e16ddc7f123cf93e47e557a3c432d0fd8daf32de --- /dev/null +++ b/detail_png/Shaft_01912_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9468fe6729cf6d66a1ef000d7c34199ab4fd34a600cbf36a4b9bad0b13bf7a19 +size 35050 diff --git a/detail_png/Shaft_01915_diam.png b/detail_png/Shaft_01915_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aeb9c891f0f05b5a6b70b0557204d2c3cc804d86 --- /dev/null +++ b/detail_png/Shaft_01915_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce2b64778d037771349890d71c92c1ab8fd00ad3258d9403d5527965b52f4d49 +size 19471 diff --git a/detail_png/Shaft_01915_length.png b/detail_png/Shaft_01915_length.png new file mode 100644 index 0000000000000000000000000000000000000000..16e1c51a30087c2dc88aa48d05642471fcc98b13 --- /dev/null +++ b/detail_png/Shaft_01915_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:201e6747c290ff317a1961e2f238b52a1532d69cfcd97198969137ab85a98e1b +size 16492 diff --git a/detail_png/Shaft_01915_title.png b/detail_png/Shaft_01915_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ccc41295edde0c71d93b3d7563684a0248755da --- /dev/null +++ b/detail_png/Shaft_01915_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:254f355f37d52f2e19d645a5c7ea669f502003f19fc4cdb7c822e1940f768dd5 +size 17564 diff --git a/detail_png/Shaft_01916_diam.png b/detail_png/Shaft_01916_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b1dd6c0085c4a8c0d8605d9d1243c1d47fb6b09d --- /dev/null +++ b/detail_png/Shaft_01916_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24b73090ab9e5c77cfdff1f984c16af0aa38f22108aca4aa68bf99ab617719b2 +size 19870 diff --git a/detail_png/Shaft_01916_length.png b/detail_png/Shaft_01916_length.png new file mode 100644 index 0000000000000000000000000000000000000000..058bd555235eefb6cae5398a304742bad2bfe5c3 --- /dev/null +++ b/detail_png/Shaft_01916_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f961373ed23f83d69f9a2d2222ec23f1def264a37721466dde29c06dac9867e +size 14781 diff --git a/detail_png/Shaft_01916_title.png b/detail_png/Shaft_01916_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cc31c79f9f442bfe1bc71f1898dd8584b39c03aa --- /dev/null +++ b/detail_png/Shaft_01916_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:879524d513026b4593f9b662d14a1859a50633f285b563b6f849437f1bf93960 +size 16327 diff --git a/detail_png/Shaft_01918_diam.png b/detail_png/Shaft_01918_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..978a5bb6ec65113d042991140252f1b70935155e --- /dev/null +++ b/detail_png/Shaft_01918_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d44738c82ee1438e4338dcb77b7795fc8561aeb12fab207764b5f80b14921c62 +size 24786 diff --git a/detail_png/Shaft_01918_length.png b/detail_png/Shaft_01918_length.png new file mode 100644 index 0000000000000000000000000000000000000000..87f055a92f3ca758d326bcab8ada842433bc1b6a --- /dev/null +++ b/detail_png/Shaft_01918_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:260934792aa587d2e8ce7eac1f6d8dea55186875d23fa9dd4f8c262fab7b89bc +size 23784 diff --git a/detail_png/Shaft_01918_title.png b/detail_png/Shaft_01918_title.png new file mode 100644 index 0000000000000000000000000000000000000000..49d6849f9a2bdfa7cc6d049b197946e1857d5c45 --- /dev/null +++ b/detail_png/Shaft_01918_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca35c26d1aa09bc75d698d9ed6540789cb94e4ddeb45287154e0f96134f1109c +size 26179 diff --git a/detail_png/Shaft_01924_diam.png b/detail_png/Shaft_01924_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1bbf6777e218a73cbd91c73172a8d4fca2ca03d1 --- /dev/null +++ b/detail_png/Shaft_01924_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fffa74f1ecd8f0ec4d8df8654ab9728db488f0a9432f237c9edb00d234580f08 +size 24239 diff --git a/detail_png/Shaft_01924_length.png b/detail_png/Shaft_01924_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6998d7d92a6bff715c276745fee6c9dd10ddaa84 --- /dev/null +++ b/detail_png/Shaft_01924_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89cd24fe6218e7b695285a614f9fce50701280edeebdc9c9a5f6454fef0500f7 +size 19907 diff --git a/detail_png/Shaft_01924_title.png b/detail_png/Shaft_01924_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cf024e434f31b4622f7ea6622358507e99a52cd6 --- /dev/null +++ b/detail_png/Shaft_01924_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a33aeebf25183e0a7f892b66c4cf9e8264ad600b78eb48239ad57e347475ebb6 +size 15769 diff --git a/detail_png/Shaft_01932_diam.png b/detail_png/Shaft_01932_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9e88151bfb67013cad01fc26485830d1254ba66c --- /dev/null +++ b/detail_png/Shaft_01932_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d1264f0e5e7af10bf487cd77f9098d4eb7e761c84fa065d1b870d82ebb4fbaf +size 35863 diff --git a/detail_png/Shaft_01932_length.png b/detail_png/Shaft_01932_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eb4489f498036ecc827f9d751497615df0a151a1 --- /dev/null +++ b/detail_png/Shaft_01932_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6ca06ec2cabecf946163c1eabda3b6d6225c4e63d4dca7d4f1ec56b71ecb5f2 +size 47815 diff --git a/detail_png/Shaft_01932_title.png b/detail_png/Shaft_01932_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7d8cd4992e9a4c73bd59a7f0f8be049f1b548814 --- /dev/null +++ b/detail_png/Shaft_01932_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b10e69f0914b9ad87271fac4ad27b0383899211bd215feb1ed26630d55645802 +size 35849 diff --git a/detail_png/Shaft_01934_diam.png b/detail_png/Shaft_01934_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..016d11d3bfa8023aaf5ec9c2baa7e1d8e089a29d --- /dev/null +++ b/detail_png/Shaft_01934_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b2fd5bdf47b5be8b5785da94aac859374385c904acf98a3cb54a2c36ad990e5 +size 18327 diff --git a/detail_png/Shaft_01934_length.png b/detail_png/Shaft_01934_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0d8a308f9388711a05f332e60b6e4466054caea8 --- /dev/null +++ b/detail_png/Shaft_01934_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb1830179d135de680782520e0062f525025bb76666677144c4654572d8b8f15 +size 16357 diff --git a/detail_png/Shaft_01934_title.png b/detail_png/Shaft_01934_title.png new file mode 100644 index 0000000000000000000000000000000000000000..519a7e9a1414f628632be94ee35b03acbb35b8d0 --- /dev/null +++ b/detail_png/Shaft_01934_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddf57853be0ca39f873aca9dd41ed87688ed4ebc024714a1a7d903710f4ad735 +size 15757 diff --git a/detail_png/Shaft_01937_diam.png b/detail_png/Shaft_01937_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..acab59192813ed037f936b13132b849b82f22f0d --- /dev/null +++ b/detail_png/Shaft_01937_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:534aa33a470d2db2db0f6a3043c4dc66e2103dc75ebad544634633c039a82c70 +size 23340 diff --git a/detail_png/Shaft_01937_length.png b/detail_png/Shaft_01937_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a3177988004b917e5214e9bee27ff10e6f35277a --- /dev/null +++ b/detail_png/Shaft_01937_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42bab2c545d315ad1fd1a4efb2c284dd6d6b8c22fa38e8aa256d5a0ece35717c +size 18736 diff --git a/detail_png/Shaft_01937_title.png b/detail_png/Shaft_01937_title.png new file mode 100644 index 0000000000000000000000000000000000000000..04fe067c6f973c9a66c3293282d42fd92abec1d5 --- /dev/null +++ b/detail_png/Shaft_01937_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:830f6115d600dafb7cf3e36574079a950cb048acc9298c0dbe986ee6ebc1c432 +size 20672 diff --git a/detail_png/Shaft_01939_diam.png b/detail_png/Shaft_01939_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ffb343c1c897021b62271b34c28b314d2fc43de3 --- /dev/null +++ b/detail_png/Shaft_01939_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f882c1b67e2c2ef2f37219e9450784dade0a2c58e0d27fac83ba071d3f9877f +size 30510 diff --git a/detail_png/Shaft_01939_length.png b/detail_png/Shaft_01939_length.png new file mode 100644 index 0000000000000000000000000000000000000000..beb463f653974a7600c4ee8fa90b59baa8fbbf43 --- /dev/null +++ b/detail_png/Shaft_01939_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5bd1e2cf6bc6689a78e1e1851c05df5b4d89471eeb62fe2bb9a3892d18b1755e +size 24628 diff --git a/detail_png/Shaft_01939_title.png b/detail_png/Shaft_01939_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7081155ff2ef3c38169e724425ee5712c72ca224 --- /dev/null +++ b/detail_png/Shaft_01939_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eecac1b0f60225e663c43408bec38e0b3196ee5c1e2f27bf4e7944a28b36734b +size 25346 diff --git a/detail_png/Shaft_01956_diam.png b/detail_png/Shaft_01956_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..35ca9375a7630c3ee888786116713f4646c77948 --- /dev/null +++ b/detail_png/Shaft_01956_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b5463862a746a2982d4ec786562a6298c1a7c86b0ca47758dee817716ed32b3 +size 30275 diff --git a/detail_png/Shaft_01956_length.png b/detail_png/Shaft_01956_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5f018e5ccdae29793191d63ccd96c6f3d763201d --- /dev/null +++ b/detail_png/Shaft_01956_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c5ddb539a01e5c736e39073437b056f4c04455ffb5dbb80bdd6147b369f2432 +size 42945 diff --git a/detail_png/Shaft_01956_title.png b/detail_png/Shaft_01956_title.png new file mode 100644 index 0000000000000000000000000000000000000000..74684a5d3ed19412e75c0a883023176faedd726e --- /dev/null +++ b/detail_png/Shaft_01956_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6dfbb41e32067855d4d555fc3f35d7f23dd5f0d31ad6b5c8065a82622adc3a3 +size 32982 diff --git a/detail_png/Shaft_01960_diam.png b/detail_png/Shaft_01960_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..05812e2df70697a6aab4163839e6ed7030786451 --- /dev/null +++ b/detail_png/Shaft_01960_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:331018b623a703dda6f3d3a0e5bc162071bd91e0e235b32be7e34d06ca6f056d +size 29604 diff --git a/detail_png/Shaft_01960_length.png b/detail_png/Shaft_01960_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d99c0f3ee4611172ddcdc6b01acb6650e8446af1 --- /dev/null +++ b/detail_png/Shaft_01960_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dddd8a553df44e16cdc034ed39a953c4c397103fe4e23fcf5cbe6f03bbc1a62c +size 38389 diff --git a/detail_png/Shaft_01960_title.png b/detail_png/Shaft_01960_title.png new file mode 100644 index 0000000000000000000000000000000000000000..30a2410545109fee56c32d9c669db0a462c89e43 --- /dev/null +++ b/detail_png/Shaft_01960_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72a06cc97fabde9c4cc66ae004798bc77b46de2db7f34dedbd63d51c94f3883f +size 30528 diff --git a/detail_png/Shaft_01961_diam.png b/detail_png/Shaft_01961_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..49e06e1a710410c68f3f204c56e17e2b72727740 --- /dev/null +++ b/detail_png/Shaft_01961_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc64e177902054bb1b65e200b978a8d51fd27d9eb607576ea8797c954e92f475 +size 20386 diff --git a/detail_png/Shaft_01961_length.png b/detail_png/Shaft_01961_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0dfc130ee220925c08b4fc3b264fa9a4c74f3ada --- /dev/null +++ b/detail_png/Shaft_01961_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:455424da543c88aa19815bf679ed7d34dbd0f6c21533ab0d8280d37495f1607e +size 28199 diff --git a/detail_png/Shaft_01961_title.png b/detail_png/Shaft_01961_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c4ce3c561fda959e7afd0906b5c4bffee606da41 --- /dev/null +++ b/detail_png/Shaft_01961_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82a9eb010e052b6de39e2a322642e0aae960c33e44587eddefe6c9e6099e6da2 +size 31695 diff --git a/detail_png/Shaft_01962_diam.png b/detail_png/Shaft_01962_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2416b65ebfe2a79e976592b3e884feef41c82615 --- /dev/null +++ b/detail_png/Shaft_01962_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5e656d6aed536a0023b58320af63ccba4826e9126de15fd63e45b2c57ea2437 +size 18951 diff --git a/detail_png/Shaft_01962_length.png b/detail_png/Shaft_01962_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f6d85a967a7406aa7faf491fb745884404ee5e31 --- /dev/null +++ b/detail_png/Shaft_01962_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0554d4e9e03f9098ebe00fe2641b0545d323e768561896e8ea7b67f667306827 +size 17774 diff --git a/detail_png/Shaft_01962_title.png b/detail_png/Shaft_01962_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bca75ab5fa76456544dbf3e7ec7b6075ddc68ce7 --- /dev/null +++ b/detail_png/Shaft_01962_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c1b678f7f1bd12853e2907c8dd52867817b2e0209a6733b3c3ccc0e491f610b +size 17997 diff --git a/detail_png/Shaft_01963_diam.png b/detail_png/Shaft_01963_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..df0200707a194171644ea764b97d05078ce0a86e --- /dev/null +++ b/detail_png/Shaft_01963_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e760556ce8122d1a1eb547ac4fc07deb21812451699e68982a4735ecc394ef21 +size 19536 diff --git a/detail_png/Shaft_01963_length.png b/detail_png/Shaft_01963_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ef2244c1f5293c34d5a8a7b994228dfaacb3d8e2 --- /dev/null +++ b/detail_png/Shaft_01963_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:725a4c1384eb76d7b879726d90f3454e9d699d038dd637be61bbb01de67ea87d +size 17527 diff --git a/detail_png/Shaft_01963_title.png b/detail_png/Shaft_01963_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f1c771b447841e43ef51eca7577edc359a1cca55 --- /dev/null +++ b/detail_png/Shaft_01963_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:119f2ab69609ea9c5162e5024a25a1d3948d3401675746318fddc077dcafcc5c +size 31932 diff --git a/detail_png/Shaft_01968_diam.png b/detail_png/Shaft_01968_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..381182882025603dd8ae7d5f55028721bbc6e90d --- /dev/null +++ b/detail_png/Shaft_01968_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0aef6cbf1e0571c234221cc62d44754570c383dfc1703a94efcadf23c0ff39bd +size 18760 diff --git a/detail_png/Shaft_01968_length.png b/detail_png/Shaft_01968_length.png new file mode 100644 index 0000000000000000000000000000000000000000..61e3fbfdca5b6b36792608d853664619ac990c83 --- /dev/null +++ b/detail_png/Shaft_01968_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d333829eddb5e08d397b3a1dde96e833fcaa966c43c2d770500e9f32da8fbe2c +size 17260 diff --git a/detail_png/Shaft_01968_title.png b/detail_png/Shaft_01968_title.png new file mode 100644 index 0000000000000000000000000000000000000000..03916f7d1b63d3dc83068e810d06afe127631760 --- /dev/null +++ b/detail_png/Shaft_01968_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c981dbd2d9b6606c2ee6d38f5225dc9657fc29596a5654b8ccb294db6d3c4862 +size 18869 diff --git a/detail_png/Shaft_01970_diam.png b/detail_png/Shaft_01970_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..43ae99399ecaf8622c8dc9ec8ddb50b54410575f --- /dev/null +++ b/detail_png/Shaft_01970_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2af17743a8976bb9f80d0c122a768f937f5d709ecd4e10c2fbba11148e5bb7cb +size 25042 diff --git a/detail_png/Shaft_01970_length.png b/detail_png/Shaft_01970_length.png new file mode 100644 index 0000000000000000000000000000000000000000..73f6b3cf1124bdb7220cf468883ee6b76be14396 --- /dev/null +++ b/detail_png/Shaft_01970_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a9cb86a11d78e680291c2d3f2e9bdf5c0fa616a869b242b4d337846d9139d9b +size 17501 diff --git a/detail_png/Shaft_01970_title.png b/detail_png/Shaft_01970_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ec0b48bf44f017faf120767699d386af85d4f536 --- /dev/null +++ b/detail_png/Shaft_01970_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:964cad005ee508c19061be6eb916617ca05e16659064e0e8fb65bdc0a27988e4 +size 17029 diff --git a/detail_png/Shaft_01973_diam.png b/detail_png/Shaft_01973_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..01c96f5928b780b7d72b6646044dbe56a30ae416 --- /dev/null +++ b/detail_png/Shaft_01973_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e94b3e130f7ae7641b628c4e0e0390a14e81254c6702815e74aa5fc61ed967b +size 23114 diff --git a/detail_png/Shaft_01973_length.png b/detail_png/Shaft_01973_length.png new file mode 100644 index 0000000000000000000000000000000000000000..098409dffedfe4ce35c6ad7362b7145070866c74 --- /dev/null +++ b/detail_png/Shaft_01973_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63a9459197d86e442dddd387f64b2734c864ff5d845c45d7e2d513e76d4e5fd4 +size 20977 diff --git a/detail_png/Shaft_01973_title.png b/detail_png/Shaft_01973_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b6c4a63ac0b537619ef005d83f309f73e911794d --- /dev/null +++ b/detail_png/Shaft_01973_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ceef23861d707edd4c0f5c3b7348f2753886ea7a7a133d59d68760fbd00f4b73 +size 21798 diff --git a/detail_png/Shaft_01978_diam.png b/detail_png/Shaft_01978_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6c42be4c07e600b1687dd8b373b04ae63eac4a8a --- /dev/null +++ b/detail_png/Shaft_01978_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19eb89e229f832d92ee99384a9be512ed8fbfb4649769b264aa6ab2ddada5607 +size 19466 diff --git a/detail_png/Shaft_01978_length.png b/detail_png/Shaft_01978_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0f7e9c2b157daef796fb3f7bf47f10e08d308d00 --- /dev/null +++ b/detail_png/Shaft_01978_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1a2ce67630175eda5943861cb0e6e562d772d739fe09f6b5d544b2aefac2f10 +size 15784 diff --git a/detail_png/Shaft_01978_title.png b/detail_png/Shaft_01978_title.png new file mode 100644 index 0000000000000000000000000000000000000000..86705716ed5f2e99e12dd1432148b90df731c11a --- /dev/null +++ b/detail_png/Shaft_01978_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:acee19b6661b4499c1b36573a1e822bca0a6b449b3eb003ae0d851830859804b +size 14760 diff --git a/detail_png/Shaft_01979_diam.png b/detail_png/Shaft_01979_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0d3d38af99a236ee328ec48b20c4d23af3dd4f7d --- /dev/null +++ b/detail_png/Shaft_01979_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ab35317b61cad9209b98237c74f9ae5b08d25092964e9e22caa4f6799d694cf +size 17548 diff --git a/detail_png/Shaft_01979_length.png b/detail_png/Shaft_01979_length.png new file mode 100644 index 0000000000000000000000000000000000000000..113d551943422cb0fdf9cf9ea6541019a3fa30b5 --- /dev/null +++ b/detail_png/Shaft_01979_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40e60fc615ca35ba1fc286c393616a8914b55f24e89f0936e6f378230830b5d8 +size 14946 diff --git a/detail_png/Shaft_01979_title.png b/detail_png/Shaft_01979_title.png new file mode 100644 index 0000000000000000000000000000000000000000..84762f9d8a723d01acf77a98fa9fef93c895b921 --- /dev/null +++ b/detail_png/Shaft_01979_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ee2a4d4f0c47350b31f06ca6183c2e8bf56363c426ce9e9376855af246171c4 +size 16524 diff --git a/detail_png/Shaft_01980_diam.png b/detail_png/Shaft_01980_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..56ac2d190a1ffe326f358f3e353f6b403984eeb4 --- /dev/null +++ b/detail_png/Shaft_01980_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c409727fdecea27370102a44b04cbe2b390148b39938b2404b67667c8813ad2e +size 30424 diff --git a/detail_png/Shaft_01980_length.png b/detail_png/Shaft_01980_length.png new file mode 100644 index 0000000000000000000000000000000000000000..55a44b6bc93aa4e33cb69e08770cb9ce3f63e0ea --- /dev/null +++ b/detail_png/Shaft_01980_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d15f253d213c8e400b2c224f8b457e658143e7c26ac457f72dfffcecaa01ecc5 +size 29487 diff --git a/detail_png/Shaft_01980_title.png b/detail_png/Shaft_01980_title.png new file mode 100644 index 0000000000000000000000000000000000000000..92e8280cd2206befa37e5d5ed6b9e9997a694ad7 --- /dev/null +++ b/detail_png/Shaft_01980_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6bcc5e863752ea981520b147858fb533e42d59a788079f2b78d70984063086a7 +size 32125 diff --git a/detail_png/Shaft_01981_diam.png b/detail_png/Shaft_01981_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ccb6e2124a9f1119dad080ea5fe133c0908baf4e --- /dev/null +++ b/detail_png/Shaft_01981_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9729ba39a8f82055c45888753e61e09f82d6a423dc811e3cdc73f05f00fac40d +size 25687 diff --git a/detail_png/Shaft_01981_length.png b/detail_png/Shaft_01981_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1b7e779acf8d5bb800cc573f26646279c5a5fa0d --- /dev/null +++ b/detail_png/Shaft_01981_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d951ff964930f960bdd974199906661f8a57d5ea1793cddc1824fb6461e7b2eb +size 26386 diff --git a/detail_png/Shaft_01981_title.png b/detail_png/Shaft_01981_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f25d9660db5c12515bddbc9e982052bf60610e1a --- /dev/null +++ b/detail_png/Shaft_01981_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62ee6fc767b589164e3d73e9228bb495586ffcbc635eec7147c1a1eb511a066c +size 28513 diff --git a/detail_png/Shaft_01984_diam.png b/detail_png/Shaft_01984_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..45ec688c74ffad5ea23a08d80ff899cb2cb2fb5e --- /dev/null +++ b/detail_png/Shaft_01984_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:684cef1d82e18f9f6c07c39ff4b45d63c098f16c9c0cdbc9b002664faa66ad39 +size 25821 diff --git a/detail_png/Shaft_01984_length.png b/detail_png/Shaft_01984_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3cde3a6e76b6ff0d269d42f861e12834e6f245bb --- /dev/null +++ b/detail_png/Shaft_01984_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:063167a0212eeb5ad16422da859e3972459c7204a3a680ceb3ed748a63fb56a6 +size 20578 diff --git a/detail_png/Shaft_01984_title.png b/detail_png/Shaft_01984_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e8d79b6cf781147002cfdbb3dbbe7413d5e5e8b5 --- /dev/null +++ b/detail_png/Shaft_01984_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b091b06c90a03e3190f4914a326c9ea46cb385bf617abfcf178e138b9dae224 +size 23456 diff --git a/detail_png/Shaft_01987_diam.png b/detail_png/Shaft_01987_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..185eff15c2b3cc622774efe30b7f75359f645d8b --- /dev/null +++ b/detail_png/Shaft_01987_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f616baf3ca39784b60e4c1eaae64566ec874139195d970efccd197802cd252a8 +size 20752 diff --git a/detail_png/Shaft_01987_length.png b/detail_png/Shaft_01987_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d9fba5f5486ef8fe143a5442ff5a6238828453c7 --- /dev/null +++ b/detail_png/Shaft_01987_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b13ba1b82727010db416f18deb8c29a65be372ee976a43ab6837f5720e39d37b +size 15524 diff --git a/detail_png/Shaft_01987_title.png b/detail_png/Shaft_01987_title.png new file mode 100644 index 0000000000000000000000000000000000000000..75fdb972246e1f37e5ebe4603d8f3f914b481144 --- /dev/null +++ b/detail_png/Shaft_01987_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1220d1a64da4eeabe89e4fb4170c55e4cc12a25851fbcc3c79a43c5116146fdd +size 22137 diff --git a/detail_png/Shaft_01988_diam.png b/detail_png/Shaft_01988_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a848dca268cc508c94cfe6ae870c6641a92559f --- /dev/null +++ b/detail_png/Shaft_01988_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48fde29b5c7494f4f503fbcfb1a5dc689e976aeb14daed492b2d9e1a2050b638 +size 23956 diff --git a/detail_png/Shaft_01988_length.png b/detail_png/Shaft_01988_length.png new file mode 100644 index 0000000000000000000000000000000000000000..436fc95d05bfcd18020de2f42ad965a1f4b44279 --- /dev/null +++ b/detail_png/Shaft_01988_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abbbc47a8e6efe01b24bae2f89a319d0f6ac2b1501b8f7abbed13596d7edef34 +size 19924 diff --git a/detail_png/Shaft_01988_title.png b/detail_png/Shaft_01988_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e7080ae1347644791cff274a46cc911ca9dcfa7a --- /dev/null +++ b/detail_png/Shaft_01988_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fce2a5b3bb84625b45f94aa576cf887aae336292f6a80890b4bf938031fd3cb +size 20560 diff --git a/detail_png/Shaft_01990_diam.png b/detail_png/Shaft_01990_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..432ece2edabd121691bb1e15bead3ee5bbefb848 --- /dev/null +++ b/detail_png/Shaft_01990_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6d519dbcf67c691209b2dc751fd979ecc12363b906978ebea3df8ca24afdb87 +size 26114 diff --git a/detail_png/Shaft_01990_length.png b/detail_png/Shaft_01990_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c0b30d5d74fda871043429833a0365e88ce14fa7 --- /dev/null +++ b/detail_png/Shaft_01990_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dce544778163f398ab53cd83df1cf32f2d3fde53d829017961e1ad42aa501236 +size 25072 diff --git a/detail_png/Shaft_01990_title.png b/detail_png/Shaft_01990_title.png new file mode 100644 index 0000000000000000000000000000000000000000..70afa55b312854f4dd58a012ba75c2acf7928809 --- /dev/null +++ b/detail_png/Shaft_01990_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5db78b609a1c93ae74fc24038f362772a62b7d9df69ea7a01291485ec40997fa +size 29238 diff --git a/detail_png/Shaft_01992_diam.png b/detail_png/Shaft_01992_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..83d081b0e259a1027945fd0693808b95529f1995 --- /dev/null +++ b/detail_png/Shaft_01992_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49a0894fcf9560fe6e13db363deb70008703d86edeeea38ae225448e0ac663eb +size 42058 diff --git a/detail_png/Shaft_01992_length.png b/detail_png/Shaft_01992_length.png new file mode 100644 index 0000000000000000000000000000000000000000..283d50034b09dff405ea938b80383723c4922950 --- /dev/null +++ b/detail_png/Shaft_01992_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8f2afcf41cde63c09f595f0be73f3db15433aec1ca75f2e0dc3a0939b2ca88a +size 52737 diff --git a/detail_png/Shaft_01992_title.png b/detail_png/Shaft_01992_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5177bf3f4396057ccc9be443ef50df18a591fd79 --- /dev/null +++ b/detail_png/Shaft_01992_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2960207654212793211dead73d41bdfd78bff058fde383f4fa05f739de099107 +size 32927 diff --git a/detail_png/Shaft_02000_diam.png b/detail_png/Shaft_02000_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6675773324854bfdd1e91453601e917fdd8b6cdf --- /dev/null +++ b/detail_png/Shaft_02000_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7576b486fb8197ba3176818c269395562b2849aed9b98c6106fd7af80700534f +size 38897 diff --git a/detail_png/Shaft_02000_length.png b/detail_png/Shaft_02000_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6c8df79d96ae4f97f04f58f16d5a537ef5b413d3 --- /dev/null +++ b/detail_png/Shaft_02000_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5b4b2aa1b5db81d4aafd7cb7b0729a7532de1ed7f533a9652d7de09cb9bfa0b +size 40820 diff --git a/detail_png/Shaft_02000_title.png b/detail_png/Shaft_02000_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b870413d11ade66f5aa0a00ea9b5c0ac9245c803 --- /dev/null +++ b/detail_png/Shaft_02000_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a613b99874b755be34bcb17d659a186cb2b5520251c3be18a8ef3c11a7ba482e +size 32736 diff --git a/detail_png/Shaft_02002_diam.png b/detail_png/Shaft_02002_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..31e74585fde0074b20c88cce5f70177b8eab2573 --- /dev/null +++ b/detail_png/Shaft_02002_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:490680e3af0ce5e8f057a2cebf5fd16d7f0c75629f9d7ae0e7c955d37ab94311 +size 20258 diff --git a/detail_png/Shaft_02002_length.png b/detail_png/Shaft_02002_length.png new file mode 100644 index 0000000000000000000000000000000000000000..395e5c3739819abcde222e8143cfd37f43a63232 --- /dev/null +++ b/detail_png/Shaft_02002_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:735095f74b617e8f79020c1eb96de07440e4749e52209e56c0572be91117bac8 +size 15273 diff --git a/detail_png/Shaft_02002_title.png b/detail_png/Shaft_02002_title.png new file mode 100644 index 0000000000000000000000000000000000000000..65ee32f1442ce4fe5d307cd7aa455eeb004e61aa --- /dev/null +++ b/detail_png/Shaft_02002_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8190daac2f19bb88d0c91368faaab29e1bccfe07c8ff235cfb7ddc942360d9a +size 18647 diff --git a/detail_png/Shaft_02004_diam.png b/detail_png/Shaft_02004_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e86d0908e57d3856e01944f83b3ac996aa0a4784 --- /dev/null +++ b/detail_png/Shaft_02004_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:daa9164bebb8edd03fe7a1dc1ebe9b716910ba4f76ade6682e5b11b7fc81e122 +size 30868 diff --git a/detail_png/Shaft_02004_length.png b/detail_png/Shaft_02004_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e52fa6f2d1eda1d0df10d8ff3e1f2e2fa19875b2 --- /dev/null +++ b/detail_png/Shaft_02004_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b4e13b327cf10d183849e3d7be757fdd177f23d2e2ffa7f47a860aa4fcfe107 +size 44039 diff --git a/detail_png/Shaft_02004_title.png b/detail_png/Shaft_02004_title.png new file mode 100644 index 0000000000000000000000000000000000000000..81cbd4c792007dff902f557f4c2bd9d6b641558d --- /dev/null +++ b/detail_png/Shaft_02004_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e76a01df8e194a691a83a76d56bbec1fb9283611c0be148928f2435e57dc58c6 +size 35703 diff --git a/detail_png/Shaft_02017_diam.png b/detail_png/Shaft_02017_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6dd5204ac351a52289dc14948c5b874c159fc7fa --- /dev/null +++ b/detail_png/Shaft_02017_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a92f2fc2f888d58ee5e6b5f06092367541ab57c18a03eef5292e0058ffbb754f +size 19134 diff --git a/detail_png/Shaft_02017_length.png b/detail_png/Shaft_02017_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ebc81149e7bdd047af5bfc2fff4003ef6ea283c6 --- /dev/null +++ b/detail_png/Shaft_02017_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47342c0ef81f592916aa9f86aa2856795f8146581ff2f1f0e87684078f8b2f33 +size 17716 diff --git a/detail_png/Shaft_02017_title.png b/detail_png/Shaft_02017_title.png new file mode 100644 index 0000000000000000000000000000000000000000..91659a92f79160e17a6af9170686249f50544109 --- /dev/null +++ b/detail_png/Shaft_02017_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5becb717694da301f480777b2842cac5c612278fe966ca2d49366fc8efbd8f7e +size 25991 diff --git a/detail_png/Shaft_02029_diam.png b/detail_png/Shaft_02029_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..426580d1f5b4422760565f57a07c3a8a60af2622 --- /dev/null +++ b/detail_png/Shaft_02029_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:510316768bd20128d34d13bb3b07edf70079144f2671d3ddf9365ee14e9c2a7a +size 36842 diff --git a/detail_png/Shaft_02029_length.png b/detail_png/Shaft_02029_length.png new file mode 100644 index 0000000000000000000000000000000000000000..66192c327216c4d1a3912e227d56c61db5ad1d12 --- /dev/null +++ b/detail_png/Shaft_02029_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d75dec71bd047ab05c2826fa90817587143602d3ef9e1a182f629d55b050fe9 +size 41968 diff --git a/detail_png/Shaft_02029_title.png b/detail_png/Shaft_02029_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f4932fe720c622afd127de1d10b2f6a533ad3145 --- /dev/null +++ b/detail_png/Shaft_02029_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a05b5f4030d01ced64136a05c95ab575c48c6800b4f736443f113d78d6bec663 +size 36136 diff --git a/detail_png/Shaft_02030_diam.png b/detail_png/Shaft_02030_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ffbd6e483daf2bf1633f185407636ce9f8d48d37 --- /dev/null +++ b/detail_png/Shaft_02030_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d79c6bea1c27f9ed2f5be69f59c5ac9e25d27d18d772a4bd1639a3e450037e6c +size 18353 diff --git a/detail_png/Shaft_02030_length.png b/detail_png/Shaft_02030_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c03d26d05e7053fdeaacde1db73f7bfe1923c685 --- /dev/null +++ b/detail_png/Shaft_02030_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88d5ab2d6eb93976928f0bcc75f50e3ea9286f488b3e5f0297725c6121fbe3a3 +size 17002 diff --git a/detail_png/Shaft_02030_title.png b/detail_png/Shaft_02030_title.png new file mode 100644 index 0000000000000000000000000000000000000000..355a768f4619c6b9fb3accda0e6459aa54057a8d --- /dev/null +++ b/detail_png/Shaft_02030_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b62b87ae55a544ca70dfc8f936a934f5b1b1babf829203f68ee9530346f84a7d +size 16514 diff --git a/detail_png/Shaft_02031_diam.png b/detail_png/Shaft_02031_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d9ec88915f606c26d2a4e9137ad31063f27baf8 --- /dev/null +++ b/detail_png/Shaft_02031_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6b485e430c99aff105c59f7961d0b0d0e606cf37e663f7d3122bd80037987c6 +size 26575 diff --git a/detail_png/Shaft_02031_length.png b/detail_png/Shaft_02031_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ae3eaf9b767fcca2bd8a885ce61525c0a34dd1ac --- /dev/null +++ b/detail_png/Shaft_02031_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2af917e3ac9d413fe172883cba7df30a9c01c98a2b7755caeb7f195fe6d8c7d7 +size 30512 diff --git a/detail_png/Shaft_02031_title.png b/detail_png/Shaft_02031_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6bd99cd1a6a4055e0c02b64ff347185806d850fd --- /dev/null +++ b/detail_png/Shaft_02031_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9445b4384a213c51cfe95729f6fa98ff136bd6f3f39de0d56662473d9ceb1980 +size 28946 diff --git a/detail_png/Shaft_02035_diam.png b/detail_png/Shaft_02035_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..23e25155a807b324d13583c48fdf01d7dd314aa5 --- /dev/null +++ b/detail_png/Shaft_02035_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfd114850451f32d3ea0d4e2906037bda903e024ea416ed5c17ebc334228f0fe +size 37615 diff --git a/detail_png/Shaft_02035_length.png b/detail_png/Shaft_02035_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f9c2d72dc4bf9a294bb8764ee19edd677073e046 --- /dev/null +++ b/detail_png/Shaft_02035_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:807815c5cdc45b381a75cb9193532577469b072cc9af98b87eef390703914a68 +size 51834 diff --git a/detail_png/Shaft_02035_title.png b/detail_png/Shaft_02035_title.png new file mode 100644 index 0000000000000000000000000000000000000000..932816c0a567ad084cbf643b1ffcb74f7202b5be --- /dev/null +++ b/detail_png/Shaft_02035_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9b17b63487a5505a52556853fa490652237cdd34f135452e0dee1aa012cd946 +size 33202 diff --git a/detail_png/Shaft_02037_diam.png b/detail_png/Shaft_02037_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6ac56a26a51461dd1108faa14e4eef31eaa4abef --- /dev/null +++ b/detail_png/Shaft_02037_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:beef3a97a64f6d183c3ce91aff0add40cc677fba9d1492268a4510242d4f0edb +size 35861 diff --git a/detail_png/Shaft_02037_length.png b/detail_png/Shaft_02037_length.png new file mode 100644 index 0000000000000000000000000000000000000000..86984fde2caac4f43028a31353447ab9e03db920 --- /dev/null +++ b/detail_png/Shaft_02037_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac194d3c4c2de8b71fc67af1279315efca93087fbdbde8af40be14a34dcbdebd +size 44982 diff --git a/detail_png/Shaft_02037_title.png b/detail_png/Shaft_02037_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1f24abd1b6f7cd73ae43214218d3d4d4b11c5913 --- /dev/null +++ b/detail_png/Shaft_02037_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f93490711fb28690ccbc22533095de2d19999ac3481354485ddf8b49ef4ade6 +size 32517 diff --git a/detail_png/Shaft_02038_diam.png b/detail_png/Shaft_02038_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4ce95ff084ea63e80110aa10501537f9ad215bc0 --- /dev/null +++ b/detail_png/Shaft_02038_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cb5c112d043b03e27d342d22f6bebd6e94acd9492d557ec4c5e62037508c38e +size 31783 diff --git a/detail_png/Shaft_02038_length.png b/detail_png/Shaft_02038_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f197612f2d8c15734476f10e10b100fb6a7e1d5d --- /dev/null +++ b/detail_png/Shaft_02038_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de7213d3c9abfb49d6d2de74f8ee519b2ea3b1483fa76e842b3d6b72ed421054 +size 34469 diff --git a/detail_png/Shaft_02038_title.png b/detail_png/Shaft_02038_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7fee5fa555bfdc7ea5a02a285001f0f152145dc4 --- /dev/null +++ b/detail_png/Shaft_02038_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86edf0278c6496e2907c4938736dbf4c2b634b9d0f244a94ed54188157af9810 +size 30214 diff --git a/detail_png/Shaft_02042_diam.png b/detail_png/Shaft_02042_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6fa05280a262f9cc2cab6bdc4ad27af628e74f57 --- /dev/null +++ b/detail_png/Shaft_02042_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a52d684efa9328e0c52a40cef1bb33e21216e2afaeb7fbf42f2b72a07ca55811 +size 31535 diff --git a/detail_png/Shaft_02042_length.png b/detail_png/Shaft_02042_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c63e7f04b3aeb163e50ef63c268819734056e0b7 --- /dev/null +++ b/detail_png/Shaft_02042_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2996993371da3f5a3e380a3976bcea42a3c5253f68127854e685b4fa569cfd8 +size 29676 diff --git a/detail_png/Shaft_02042_title.png b/detail_png/Shaft_02042_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b1954845d36033e4a4d8e2eb84e688a76b46779d --- /dev/null +++ b/detail_png/Shaft_02042_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b46ce42f025c73f07894447a7baeaac7d7988e7840f0b02dadf91d690101e8f7 +size 25403 diff --git a/detail_png/Shaft_02050_diam.png b/detail_png/Shaft_02050_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a85550cb621bdbfea884cd9005c655fee51af3c7 --- /dev/null +++ b/detail_png/Shaft_02050_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ec3b1dd5e5114647e78b49a3aacddced831e875542b9bfffc7b1c819dacf7c9 +size 20549 diff --git a/detail_png/Shaft_02050_length.png b/detail_png/Shaft_02050_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dbd34d2a1ba0bb00dd0c48ca486736803bc6bffd --- /dev/null +++ b/detail_png/Shaft_02050_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46ab54d8a5367dc9dcff652ca7d07e105ce13b6af91fe42b76033cfbc501eb31 +size 22400 diff --git a/detail_png/Shaft_02050_title.png b/detail_png/Shaft_02050_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1d22c23d49780a2d941507ff0fad8e068db4cf60 --- /dev/null +++ b/detail_png/Shaft_02050_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d00b768f445e64c9602f838a0fb7835ac79520cb83aea15d51cbee0cddba8ed7 +size 32359 diff --git a/detail_png/Shaft_02053_diam.png b/detail_png/Shaft_02053_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f1b0ad6042996cb6ca0e40af6edd4db2926daab6 --- /dev/null +++ b/detail_png/Shaft_02053_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c8da50f37243c6dfda9b48a68183447de9655dc64833ad9100e99b937ae6660 +size 22291 diff --git a/detail_png/Shaft_02053_length.png b/detail_png/Shaft_02053_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9e83a81dd8520776dc022e661231ea1944fe7937 --- /dev/null +++ b/detail_png/Shaft_02053_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b58199c79d5eb75690519be0707a30b4a5eb77e88235b7e14181e9bee5ab4a28 +size 29289 diff --git a/detail_png/Shaft_02053_title.png b/detail_png/Shaft_02053_title.png new file mode 100644 index 0000000000000000000000000000000000000000..094314a214a0de966b2ae986390fcbd9938d41fc --- /dev/null +++ b/detail_png/Shaft_02053_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff592614db9b05a706e589d10b61d7516a165703e706bbfdf4ea56e8e789be92 +size 30570 diff --git a/detail_png/Shaft_02056_diam.png b/detail_png/Shaft_02056_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..095021ebc6f17dd87c504088bc45a3186d57547c --- /dev/null +++ b/detail_png/Shaft_02056_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:786553c285074cae5c2ada424e42e6b0045b8ee42d14fec11c8d774293ea5a0a +size 19054 diff --git a/detail_png/Shaft_02056_length.png b/detail_png/Shaft_02056_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ead7bdefc3b1360818a180d7d3ef093408e51471 --- /dev/null +++ b/detail_png/Shaft_02056_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28109ca4bbb0de5858bf8b512fcf65da5eee16e9c9f62f0fbbdf456ab3b6d81a +size 25769 diff --git a/detail_png/Shaft_02056_title.png b/detail_png/Shaft_02056_title.png new file mode 100644 index 0000000000000000000000000000000000000000..782606f47c202dc3b1849cb690170cc3b2ee43c1 --- /dev/null +++ b/detail_png/Shaft_02056_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2879b875f7f83ba111fef282748bef121178b6993113281ee9ddf55d6a05b591 +size 30171 diff --git a/detail_png/Shaft_02058_diam.png b/detail_png/Shaft_02058_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e75976fbaa3f59011f830fc9d1bf3050699b0e7c --- /dev/null +++ b/detail_png/Shaft_02058_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:596f6a5726559b0a4d5b45a52d46cc7ccfc55ea5f82d15e61d603d2794b2eb31 +size 20608 diff --git a/detail_png/Shaft_02058_length.png b/detail_png/Shaft_02058_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8e949b26d84035f38e12ebc1b084a8d185857be0 --- /dev/null +++ b/detail_png/Shaft_02058_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5590a0bf6122b92e9ef1fa2a9724e43c8764a986414aa22c3a34816e39a0eef6 +size 22348 diff --git a/detail_png/Shaft_02058_title.png b/detail_png/Shaft_02058_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d08ab5694a8fd0e169edebf9d7c88043396aee23 --- /dev/null +++ b/detail_png/Shaft_02058_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a033b0e148d67218425b26b9e9a02e56e571e4c9418f753af505d3464ea9a8a6 +size 29682 diff --git a/detail_png/Shaft_02065_diam.png b/detail_png/Shaft_02065_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3567b2e0aad7de77a08dcb732ad5e937ed1770b5 --- /dev/null +++ b/detail_png/Shaft_02065_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ea6d50e937a1ae47e27ff7ccb943e11403d4478cf34cb6bc72b1c3cfdcf8792 +size 26903 diff --git a/detail_png/Shaft_02065_length.png b/detail_png/Shaft_02065_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cf028025256623c151df036fdf6115053228f5c4 --- /dev/null +++ b/detail_png/Shaft_02065_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebe2f70e4c8e75687ca06329493218509e5daef9cc2ba194a3f65902a3ec70a1 +size 23132 diff --git a/detail_png/Shaft_02065_title.png b/detail_png/Shaft_02065_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a6dca0b265519552051128bc1f091548f74eb974 --- /dev/null +++ b/detail_png/Shaft_02065_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed77b03210ddd867c1744ebd83e963e204e8a1f94e49be13015dbe0b383e18d4 +size 29614 diff --git a/detail_png/Shaft_02068_diam.png b/detail_png/Shaft_02068_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..324c1a09bddc50a670bb54a8d0981896d70f295b --- /dev/null +++ b/detail_png/Shaft_02068_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66bc1b762a281e7f8b8a81e072d1d669a0ff1285601ca381ac068d612d43c06d +size 28773 diff --git a/detail_png/Shaft_02068_length.png b/detail_png/Shaft_02068_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3800dd4b980186af7e8147c5f0b683cf4a4028b7 --- /dev/null +++ b/detail_png/Shaft_02068_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16dec6b3e5aac1c7dfadd7658a93981be7f45d78a082cfcdb9e1394de8cc89a0 +size 36173 diff --git a/detail_png/Shaft_02068_title.png b/detail_png/Shaft_02068_title.png new file mode 100644 index 0000000000000000000000000000000000000000..738b268d51306e061eba14b924cd5d1167eb3e5e --- /dev/null +++ b/detail_png/Shaft_02068_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3c9311a3f999f7fd3072ec5d4b6c8ec89519067e4ea9d09693ed225b942afa9 +size 33470 diff --git a/detail_png/Shaft_02076_diam.png b/detail_png/Shaft_02076_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..deedbfb37b0797a5ef0f59930c13945fe114f18c --- /dev/null +++ b/detail_png/Shaft_02076_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50309ae8d6b5886e54c45e673e150809c24e7d7b4b6834206c53221c1d10600d +size 25417 diff --git a/detail_png/Shaft_02076_length.png b/detail_png/Shaft_02076_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9951248296c20af423f16b43451cb1247aa87506 --- /dev/null +++ b/detail_png/Shaft_02076_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a021e58a2346a83d5714d37d1299d2d12ecde6905fad0ddc2c22e3515609ce93 +size 28039 diff --git a/detail_png/Shaft_02076_title.png b/detail_png/Shaft_02076_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e77d3c89fd73dcb35ae1ebcc2d266263ff5739f6 --- /dev/null +++ b/detail_png/Shaft_02076_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7beb38d5635e298a8bbd9eb7e42100000165df64939e5db4689c104856a1e0a5 +size 35611 diff --git a/detail_png/Shaft_02077_diam.png b/detail_png/Shaft_02077_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..51841829e34c47668397114b8b03a356267453dd --- /dev/null +++ b/detail_png/Shaft_02077_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d424cbfdf9a6f816dc72d76a749b2f446e6a6797b118afab1336fd072a9dab0 +size 32059 diff --git a/detail_png/Shaft_02077_length.png b/detail_png/Shaft_02077_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1c52ea2734b1148d120d0e7bcedb9a85c6ba8b07 --- /dev/null +++ b/detail_png/Shaft_02077_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05e04b2fdf30bb650cbf199f0eca97a6ca7030c966207acc2acbc0b1c3c049ea +size 27459 diff --git a/detail_png/Shaft_02077_title.png b/detail_png/Shaft_02077_title.png new file mode 100644 index 0000000000000000000000000000000000000000..19eb8baeefc5ab7a4001ae20ebb986376889690b --- /dev/null +++ b/detail_png/Shaft_02077_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec1d00aa1723962091cb2c05546bd8003d145bff0d21613e5946c7552c3c9afa +size 34587 diff --git a/detail_png/Shaft_02078_diam.png b/detail_png/Shaft_02078_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..116dc467a2187a3a6d42155747777e34da326dea --- /dev/null +++ b/detail_png/Shaft_02078_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e2b69d8f7ed95ad95c68ad9466ba068c24360fc47a9ddf25dd12f3a1156a876 +size 36205 diff --git a/detail_png/Shaft_02078_length.png b/detail_png/Shaft_02078_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3386659112fd7d1e73c15d0d11c54cf7288fc438 --- /dev/null +++ b/detail_png/Shaft_02078_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4136c3633dc86430dd90f557b4b320f7fc3e0a6f55c9554a6ea98d831434f824 +size 33674 diff --git a/detail_png/Shaft_02078_title.png b/detail_png/Shaft_02078_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bbf3866182403ae004ca940cab8b91841508947a --- /dev/null +++ b/detail_png/Shaft_02078_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f85fffc10993001e09376725828847197d3cb79b48ea1f57349c62b39b8ed32e +size 30496 diff --git a/detail_png/Shaft_02082_diam.png b/detail_png/Shaft_02082_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c6430e901ac57bc860fd3070075fb11d6504378 --- /dev/null +++ b/detail_png/Shaft_02082_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf54477e8a300951628b082ef2cfe60f1023b1493e67551a18fec60f79cf925b +size 31300 diff --git a/detail_png/Shaft_02082_length.png b/detail_png/Shaft_02082_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ad1ed2a6b6f83b939bf04a1f8de097ecab5533e9 --- /dev/null +++ b/detail_png/Shaft_02082_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffec6ee1035ed0367629c9dff68d683c5dddf44c6f136a4d9dfd79e1a8ff8d29 +size 26380 diff --git a/detail_png/Shaft_02082_title.png b/detail_png/Shaft_02082_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0e1b25d6029a4ab1da8f39a8a23202badfd4645c --- /dev/null +++ b/detail_png/Shaft_02082_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e7072d844431a3946c66ca56b9987565b4f650a033d6bddd838fa92c09644bc +size 31733 diff --git a/detail_png/Shaft_02089_diam.png b/detail_png/Shaft_02089_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b64df44bb07930ae351c01a214338e0b20b52e52 --- /dev/null +++ b/detail_png/Shaft_02089_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5467b4b2411d6440c72abc71e9b0d36a7ba649d379483be17dd8050b7d2c6b2 +size 25583 diff --git a/detail_png/Shaft_02089_length.png b/detail_png/Shaft_02089_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6cf8944f34de1eecaf690b0b102a33bc370472d3 --- /dev/null +++ b/detail_png/Shaft_02089_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e04ffbd9f591e99d6a308db7ddfb399e6b1df3d13396f795314f033ac6f458e9 +size 20701 diff --git a/detail_png/Shaft_02089_title.png b/detail_png/Shaft_02089_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8e1e2d480f23ac8c08180a23036c187f83f938bd --- /dev/null +++ b/detail_png/Shaft_02089_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb0f5a45e1a6e87c057f0be6a8c7c62e27e7a2182cc71a0790006aad9c904883 +size 21374 diff --git a/detail_png/Shaft_02094_diam.png b/detail_png/Shaft_02094_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..27e909dc41fc94838dbffe0dea62de16b4b8d02a --- /dev/null +++ b/detail_png/Shaft_02094_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c443695fbb9788f4a2d6a7f5cff3c9a307f68190f91a2904eec456a99904f9d +size 26835 diff --git a/detail_png/Shaft_02094_length.png b/detail_png/Shaft_02094_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a8625fdbcda262974da515c3d13300cad1eae9b7 --- /dev/null +++ b/detail_png/Shaft_02094_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e84518599f46449a0eeccee42c36ae1f22c18f1c714fc6c4add4d7e4995eee78 +size 28683 diff --git a/detail_png/Shaft_02094_title.png b/detail_png/Shaft_02094_title.png new file mode 100644 index 0000000000000000000000000000000000000000..728ae83e43cba4e856677489d2eab08ccafd3c6b --- /dev/null +++ b/detail_png/Shaft_02094_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:444ea843c793ca137fb16ac741e2aaf1026d19e69777de2b8b8d4276c8dd5ae9 +size 35773 diff --git a/detail_png/Shaft_02096_diam.png b/detail_png/Shaft_02096_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7736e122f92d393592cb612ab8e23e7c30b69508 --- /dev/null +++ b/detail_png/Shaft_02096_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c80fc6cadda5774b265605cadb7463d2ccf1b6e2080fed224105361708fe0c5e +size 24076 diff --git a/detail_png/Shaft_02096_length.png b/detail_png/Shaft_02096_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9fde86ec3f9da39bcddc427b71630f806eb859b0 --- /dev/null +++ b/detail_png/Shaft_02096_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d18e76ad6bce9877a56d3c0c9a6e7801d68ab2b4a38131f5767ceee079ab3378 +size 22034 diff --git a/detail_png/Shaft_02096_title.png b/detail_png/Shaft_02096_title.png new file mode 100644 index 0000000000000000000000000000000000000000..36b5cc38aa953f42aea51034e74d4fab912649ff --- /dev/null +++ b/detail_png/Shaft_02096_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8716504a7debf2b95aaaa726f445da1522efcf3e85930f57f7ff881d2a9d8d35 +size 20057 diff --git a/detail_png/Shaft_02102_diam.png b/detail_png/Shaft_02102_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3671f9cf0d808423fa6ad6983d16bab64a26eec7 --- /dev/null +++ b/detail_png/Shaft_02102_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61d29aac6b3fc63477b7fb5a40842797ca6bdc3fd4f4e578d6f21cfeaa1a9069 +size 29873 diff --git a/detail_png/Shaft_02102_length.png b/detail_png/Shaft_02102_length.png new file mode 100644 index 0000000000000000000000000000000000000000..aa378e04ce7627a5ed22fa23f16c6fdba2a98a2e --- /dev/null +++ b/detail_png/Shaft_02102_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1b964781a6310997ce371ac58c104ed757e05255003f6b2a5997b7997f311c3 +size 27172 diff --git a/detail_png/Shaft_02102_title.png b/detail_png/Shaft_02102_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f391a508d095f14d5b2686caf0e3f3dd407d72ec --- /dev/null +++ b/detail_png/Shaft_02102_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8c4567b507c53d0ac119a15470aa475a2b7312103a0af5d094cf17f4a27a566 +size 23641 diff --git a/detail_png/Shaft_02103_diam.png b/detail_png/Shaft_02103_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3780d7ad57be48cfd241fd813c9986b84b29ed5d --- /dev/null +++ b/detail_png/Shaft_02103_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1750a5d6aac6142f3012f43904c72ea66f2be3953b565a2ca08f46ac00529ed +size 31175 diff --git a/detail_png/Shaft_02103_length.png b/detail_png/Shaft_02103_length.png new file mode 100644 index 0000000000000000000000000000000000000000..44358f5c4830d1698ef96f5dea72503460a5d75f --- /dev/null +++ b/detail_png/Shaft_02103_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2283054cf0ce2ef51b77c7b41d0ad23aca6db1f13d9cc39fbcb28614c40319af +size 43961 diff --git a/detail_png/Shaft_02103_title.png b/detail_png/Shaft_02103_title.png new file mode 100644 index 0000000000000000000000000000000000000000..76ca96aa7ab055a65e2a7e958575b70176ddf82f --- /dev/null +++ b/detail_png/Shaft_02103_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f127ac35a7224cf118365f2373cb8d02b68c8148ae7c5bea59beb38a75012b6 +size 32372 diff --git a/detail_png/Shaft_02110_diam.png b/detail_png/Shaft_02110_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ad7d170819669db3b1dc468d5d7a93abcef838f7 --- /dev/null +++ b/detail_png/Shaft_02110_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:603a4f076b78f83649eee2207157c79dc2ccfbf9d7bc3843f5089b5b0cf36041 +size 42263 diff --git a/detail_png/Shaft_02110_length.png b/detail_png/Shaft_02110_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3ebc18618daff7519b62dc6bea4f5eaa62c99786 --- /dev/null +++ b/detail_png/Shaft_02110_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02a81819f6ada55435904acc68f30a2f2942b498e99b940a2b888a5090954381 +size 58662 diff --git a/detail_png/Shaft_02110_title.png b/detail_png/Shaft_02110_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e5d6eee71da3661c93f388e921f835add31c8996 --- /dev/null +++ b/detail_png/Shaft_02110_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcdd9b762f7a6c4fbf6bd30b169075ee3723a7c7f7fa182c478263ab8373946a +size 32206 diff --git a/detail_png/Shaft_02112_diam.png b/detail_png/Shaft_02112_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..827c01c92d3a29a6a42c6106244408cbbbfe6a32 --- /dev/null +++ b/detail_png/Shaft_02112_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aafd4f650cef1f2a8ec072bf88cc9c0ac33365b3b99e718a871df7f1dca89354 +size 20059 diff --git a/detail_png/Shaft_02112_length.png b/detail_png/Shaft_02112_length.png new file mode 100644 index 0000000000000000000000000000000000000000..33ef0fe1a7fd772d0c2b30dfcf9810bbee43945c --- /dev/null +++ b/detail_png/Shaft_02112_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b72ad9cee105132a33c62fcf261bb282b85e6e806510a890baa5cea3724f210a +size 23681 diff --git a/detail_png/Shaft_02112_title.png b/detail_png/Shaft_02112_title.png new file mode 100644 index 0000000000000000000000000000000000000000..690a21769b81bc4cf0d8b75167bacede58dc2d2b --- /dev/null +++ b/detail_png/Shaft_02112_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c001c44f21b62374c1a9c63990c0ea464c48f12e866621f4df2bd48771d3564 +size 30523 diff --git a/detail_png/Shaft_02120_diam.png b/detail_png/Shaft_02120_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c1b35669eee320346b9a86145f582a7b9eaa925b --- /dev/null +++ b/detail_png/Shaft_02120_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:713448188cedf1f49b569964186e1be65e8fecc14b37ff7bd15be068f33e6fb4 +size 19749 diff --git a/detail_png/Shaft_02120_length.png b/detail_png/Shaft_02120_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8d79c806d086f26a9d0e45a44e212de27b010a4e --- /dev/null +++ b/detail_png/Shaft_02120_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:510aaf36883b98e182d26c7e5184e8535e76c4d4058da806c09947a197e3739d +size 15102 diff --git a/detail_png/Shaft_02120_title.png b/detail_png/Shaft_02120_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7deb6dc5d78fecec2b7fc0f9cd45398012006427 --- /dev/null +++ b/detail_png/Shaft_02120_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f64dd1d64078cc172003250e359d63d730e4ec7cf18837ee9b4684521020e616 +size 15404 diff --git a/detail_png/Shaft_02122_diam.png b/detail_png/Shaft_02122_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..73b72f015576f7c6ee4b371fb67321e46fed82f4 --- /dev/null +++ b/detail_png/Shaft_02122_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:785aaf03fe92753c3ecb863b1fe26b808122b1e3af24fb0a8c92c2000945de11 +size 25259 diff --git a/detail_png/Shaft_02122_length.png b/detail_png/Shaft_02122_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1a1658ee1e7e02eefe266e6c1db1a2f68aa563e9 --- /dev/null +++ b/detail_png/Shaft_02122_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdb0685491127cd3adb7ae88c5a737301658b3985b15ec5f11b161a58c2a0b19 +size 25120 diff --git a/detail_png/Shaft_02122_title.png b/detail_png/Shaft_02122_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d87a8398af86c7e931662796f59d92451c50f22a --- /dev/null +++ b/detail_png/Shaft_02122_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:662ad7c80440df219576c7786632912a4e1ec009ed7fda530e650063138f524a +size 30757 diff --git a/detail_png/Shaft_02124_diam.png b/detail_png/Shaft_02124_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97ca752b0a4eee58f6f5d2e7892ec295ac6643d0 --- /dev/null +++ b/detail_png/Shaft_02124_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ed11253b11a8fe5123ae90f451f49c26ee98461f06c3f60b4d9897adc93cfd9 +size 24865 diff --git a/detail_png/Shaft_02124_length.png b/detail_png/Shaft_02124_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dd9aa97ba17c5cef62298b517b1ef4269683a485 --- /dev/null +++ b/detail_png/Shaft_02124_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0d24289962d5d6096f48c1e3052633bdac4b4e1b8a114727cbe2fc88f7f46c0 +size 20123 diff --git a/detail_png/Shaft_02124_title.png b/detail_png/Shaft_02124_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7936185caed895ac51f5e37d4230046e07d92ec3 --- /dev/null +++ b/detail_png/Shaft_02124_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e5e7eba45a864b4323a70a1f5537c2606f6ec70964510a66eecd241c0b4fa56 +size 18741 diff --git a/detail_png/Shaft_02126_diam.png b/detail_png/Shaft_02126_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5c0ce27ecdfdc65daef43b0871f0f5192fbfbb24 --- /dev/null +++ b/detail_png/Shaft_02126_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e6340cdae0dc58c52506369b99164f8cde40c25d15590176500fa67a86df2a6 +size 30729 diff --git a/detail_png/Shaft_02126_length.png b/detail_png/Shaft_02126_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cae2fe6a30dd1efb3fe84d4d3960e9d4882afc63 --- /dev/null +++ b/detail_png/Shaft_02126_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26d1831f546dd7422fe251c1b73924f4eaa0bed865ac9c013ebc74fccc3cf982 +size 39525 diff --git a/detail_png/Shaft_02126_title.png b/detail_png/Shaft_02126_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a8ea0f96f4ca477f6cd600b4e02324bc5136bdf8 --- /dev/null +++ b/detail_png/Shaft_02126_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f75797a33b7da17d0c1d1cef5b54365b97e60b31b1acd0eade8fe23001d94d1c +size 32213 diff --git a/detail_png/Shaft_02131_diam.png b/detail_png/Shaft_02131_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8a8a8feb1527f60fea5b0b23be7c9eb9323ea03 --- /dev/null +++ b/detail_png/Shaft_02131_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fc1425afecfc2e9e00df857e0ef1a7f2ff95e3db51ce1373d92d23b0c880e89 +size 20479 diff --git a/detail_png/Shaft_02131_length.png b/detail_png/Shaft_02131_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7a6c2907d7dede3124c1bd7d55ccb5effe9d44a0 --- /dev/null +++ b/detail_png/Shaft_02131_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1e98219143f6df5a2bd198ecc947bff5b040653078f9f5c31756477f5517ca0 +size 20583 diff --git a/detail_png/Shaft_02131_title.png b/detail_png/Shaft_02131_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8d2ad799041c17a5bf769efc450217b5c9424610 --- /dev/null +++ b/detail_png/Shaft_02131_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdcda00548b47e347fa9c99be14be8ed3fec9462b8e1b4e8a969f63e3d58a8b8 +size 33307 diff --git a/detail_png/Shaft_02132_diam.png b/detail_png/Shaft_02132_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..642de5a18d53549116a78519524dc548518bb048 --- /dev/null +++ b/detail_png/Shaft_02132_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a367bfe9d7b5d6cfb7136b086f2dba9f82ea75070684fb78e0533841261b9230 +size 19951 diff --git a/detail_png/Shaft_02132_length.png b/detail_png/Shaft_02132_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e8bf7b3c8f4cca21abcff716dcd7fbc87703333e --- /dev/null +++ b/detail_png/Shaft_02132_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4e85e0c9be5cdd35b4c00cf46d2176ff8d777126f4854773a35de3798b5764b +size 23164 diff --git a/detail_png/Shaft_02132_title.png b/detail_png/Shaft_02132_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7b76e15ecdf0921d8d2b1aa4e1852cb7d869ab2f --- /dev/null +++ b/detail_png/Shaft_02132_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:790899b88c89aa688fa0a53396aef2ce44ce54d3b0bc0ad4c404396bea0b6958 +size 31632 diff --git a/detail_png/Shaft_02133_diam.png b/detail_png/Shaft_02133_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..face3e0fc24bb2ef21ba2ac24a3b3cceb7492377 --- /dev/null +++ b/detail_png/Shaft_02133_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:215324375f465ff8f1cdea2a8f475774143bde51e9dd394dce0eade47d921dee +size 33237 diff --git a/detail_png/Shaft_02133_length.png b/detail_png/Shaft_02133_length.png new file mode 100644 index 0000000000000000000000000000000000000000..57c844f6c9cd35d36f1020fcd9e8dc9fdf349265 --- /dev/null +++ b/detail_png/Shaft_02133_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ae2b5b2677a1411fa513ad294b6ad3194ca58d0db23a92f5721545a04114ae9 +size 45890 diff --git a/detail_png/Shaft_02133_title.png b/detail_png/Shaft_02133_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f9d3463ace4977dc33f076d3b06dc79c69d47215 --- /dev/null +++ b/detail_png/Shaft_02133_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d38faf36109649d560a4ba267cc98ac587ed9d52188abfba2bf8aec31dae087 +size 33002 diff --git a/detail_png/Shaft_02134_diam.png b/detail_png/Shaft_02134_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c396a1c2560c5a2cb8b3200ce31732a1b65c3645 --- /dev/null +++ b/detail_png/Shaft_02134_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:598fafa63f83f9ab5207a78f7888362f6906229222f3286371374f95f4255b28 +size 19234 diff --git a/detail_png/Shaft_02134_length.png b/detail_png/Shaft_02134_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0da59f063604ba56ded95262737f700ea2ab762a --- /dev/null +++ b/detail_png/Shaft_02134_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d18027505f306cb1a4df5d71592379f6b1cb1604619998a76d873885a62688d4 +size 26325 diff --git a/detail_png/Shaft_02134_title.png b/detail_png/Shaft_02134_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fa1156b6e17c429a7535a85750fa8618676561f3 --- /dev/null +++ b/detail_png/Shaft_02134_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53a068c3a62d379ded46167d46f4830bcecb90140171da03cf3e996b1f36fa9e +size 31648 diff --git a/detail_png/Shaft_02137_diam.png b/detail_png/Shaft_02137_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3ac0bae8b9cd6438f86da27fa9a46f5de7c42771 --- /dev/null +++ b/detail_png/Shaft_02137_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ca7351ccf613682de6f3600d87f360ebb175163e610e3af0af6c509cff16e69 +size 28780 diff --git a/detail_png/Shaft_02137_length.png b/detail_png/Shaft_02137_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a569f249724e586b8d70ae94e1444ea18c8e6b43 --- /dev/null +++ b/detail_png/Shaft_02137_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a33b780ad9a6acc943fe64e40e06bbb35dca13177727e1564e7b77b7c926137 +size 25824 diff --git a/detail_png/Shaft_02137_title.png b/detail_png/Shaft_02137_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a5299a8605c4502638db657ccda9f6a2758dbc04 --- /dev/null +++ b/detail_png/Shaft_02137_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18f49d7532cd69ef6bb0de6daab7c88472a20f51d8ead6dc51b8588d1b87f83e +size 26195 diff --git a/detail_png/Shaft_02143_diam.png b/detail_png/Shaft_02143_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..95fbdeb6e9bb5c0a157bd7c98e04c262045788ea --- /dev/null +++ b/detail_png/Shaft_02143_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79b404c35d84f558a18431d0bd4e15195937ac44e690bddfafdbe54f9e28e98f +size 28970 diff --git a/detail_png/Shaft_02143_length.png b/detail_png/Shaft_02143_length.png new file mode 100644 index 0000000000000000000000000000000000000000..465edd38aa9c45fa3efb0e7b197b1ddb70e60487 --- /dev/null +++ b/detail_png/Shaft_02143_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02bc0080251d07bdef97605d7d4e19a0a798631696f5e391b7d3a861c612cce0 +size 23018 diff --git a/detail_png/Shaft_02143_title.png b/detail_png/Shaft_02143_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ef8283e62ea807b71c734702eff9dacd3ddb1e76 --- /dev/null +++ b/detail_png/Shaft_02143_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fab19c6482095dbc111e1a0717bee90055beb73b4366d94b6f41e0b0a70eaaa3 +size 19012 diff --git a/detail_png/Shaft_02149_diam.png b/detail_png/Shaft_02149_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..68d0263c916b194ad55d1353b052cbc56c599977 --- /dev/null +++ b/detail_png/Shaft_02149_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32b0a567a2d7f4ff0c8f40b1704a49d40181a5271eaaeaa2271d2b697e11ee4c +size 35260 diff --git a/detail_png/Shaft_02149_length.png b/detail_png/Shaft_02149_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1c2c1b23e447749a61c06bae72f3ab1b9f59b892 --- /dev/null +++ b/detail_png/Shaft_02149_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b79d2c9b26a4a15eb8ed4841cb42a3d886d9605a0dc8aa192dcf8e31225ee30 +size 38765 diff --git a/detail_png/Shaft_02149_title.png b/detail_png/Shaft_02149_title.png new file mode 100644 index 0000000000000000000000000000000000000000..13ead43117fd980f4e7cb582bd9c778e4785f0ea --- /dev/null +++ b/detail_png/Shaft_02149_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:901353480d452aafda69e48b06d61e21965ce4147e141ba99bf491ae835c0cfc +size 34699 diff --git a/detail_png/Shaft_02152_diam.png b/detail_png/Shaft_02152_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d9c1fca05866de30dd4b9cb934ab8d88660d7e9f --- /dev/null +++ b/detail_png/Shaft_02152_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40e9ae5654680cdf9905a057f068fede9846640e8b2e7be5a6c7531bb0aebec7 +size 35684 diff --git a/detail_png/Shaft_02152_length.png b/detail_png/Shaft_02152_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5c9313045dd183aeee233845e2cb26b301c53753 --- /dev/null +++ b/detail_png/Shaft_02152_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:725a947da6fc8b2e685737414dc61ebad47ac0e91490d698542e141d09215704 +size 33480 diff --git a/detail_png/Shaft_02152_title.png b/detail_png/Shaft_02152_title.png new file mode 100644 index 0000000000000000000000000000000000000000..52c14879a202fb167ae84cd606643d112af7d756 --- /dev/null +++ b/detail_png/Shaft_02152_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7823410557736437d02fc39dbed7d0785d431a757b171d46cd3e07c185a70d93 +size 29102 diff --git a/detail_png/Shaft_02153_diam.png b/detail_png/Shaft_02153_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..82c458a45836dbc55bc01ce7f4f73dc1922e351b --- /dev/null +++ b/detail_png/Shaft_02153_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a189d65b29c393a23a057fda59c38ca9e1bb6f37ba2ca57ea7f90c9f537781d +size 30648 diff --git a/detail_png/Shaft_02153_length.png b/detail_png/Shaft_02153_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6e60cca4cfc461672225b1044651bbdfa6eb61ae --- /dev/null +++ b/detail_png/Shaft_02153_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2305dfda5a903c0ea80f087d975d0462afebdc60cd8537c482c4ce9ee8fe7071 +size 39805 diff --git a/detail_png/Shaft_02153_title.png b/detail_png/Shaft_02153_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7e16e628070ab2cb7abcfd31dc612f76f6bd22c3 --- /dev/null +++ b/detail_png/Shaft_02153_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f76cfe2b9c6eaeb82baa3906ce77c41a8e9a2aed31975d4b111c14983093acd1 +size 32237 diff --git a/detail_png/Shaft_02154_diam.png b/detail_png/Shaft_02154_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5464ba532699cba1cb230f0ef61e855160b528fb --- /dev/null +++ b/detail_png/Shaft_02154_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3358e94c0a12dc65e25138fd2b937726ef990a5a2b369537ec8a9990b31e7825 +size 24818 diff --git a/detail_png/Shaft_02154_length.png b/detail_png/Shaft_02154_length.png new file mode 100644 index 0000000000000000000000000000000000000000..895daf413bc1b5a81e6b9b40f8a0cb95b995c1d4 --- /dev/null +++ b/detail_png/Shaft_02154_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3ac2b48def4630b27530e18e2bc6d988e7b13cf71554aef36c83825bcec26f9 +size 22325 diff --git a/detail_png/Shaft_02154_title.png b/detail_png/Shaft_02154_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f88558a923cbbca37776c9f94813c172cd1ec63b --- /dev/null +++ b/detail_png/Shaft_02154_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e7a98e4714ecde50bb1c4dd41cb701d730d5862287f811586db815c2af0d7ef +size 28420 diff --git a/detail_png/Shaft_02160_diam.png b/detail_png/Shaft_02160_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4b97ed51b253b892a95598ffafbfade7f39d643d --- /dev/null +++ b/detail_png/Shaft_02160_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f9fda6180c616e726dbff42954f63be6fc466eec1daf272facf626a702c607e +size 29040 diff --git a/detail_png/Shaft_02160_length.png b/detail_png/Shaft_02160_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6492b56f26769b683136d0a259ff75fb6562682b --- /dev/null +++ b/detail_png/Shaft_02160_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cdbad9147789904705c5334f57a09c6fd93bacbc919e8937b5650fa2c9c1622 +size 25370 diff --git a/detail_png/Shaft_02160_title.png b/detail_png/Shaft_02160_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0d97d4633ccd43f6765b655d787531142c873d14 --- /dev/null +++ b/detail_png/Shaft_02160_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96d12e4e6cb97bf4150fedfb167d9d127d9812293eb0409f5c993f04238268be +size 30108 diff --git a/detail_png/Shaft_02162_diam.png b/detail_png/Shaft_02162_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fba9b03da207b353486e1e547f9d069d4a7246e7 --- /dev/null +++ b/detail_png/Shaft_02162_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdb9d150aecb6427c6b7cdedda78c17c562f4e29d8a5e1db29102b6a9e51520b +size 20156 diff --git a/detail_png/Shaft_02162_length.png b/detail_png/Shaft_02162_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f8a93ecae96b5d03eaa2b0b0d60cf9bac2362f16 --- /dev/null +++ b/detail_png/Shaft_02162_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0080db5cf4dc7aac1485f28c644c34ef8c2b0dabd500ac804509dd03183aa2b4 +size 15964 diff --git a/detail_png/Shaft_02162_title.png b/detail_png/Shaft_02162_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c90fcee2f4bc1994594386a8367b704876f86c8f --- /dev/null +++ b/detail_png/Shaft_02162_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29281dd6ec5c607c12dfd2a561f34542e41f5b6613099f0dcc8c64802a3f8bbc +size 12769 diff --git a/detail_png/Shaft_02163_diam.png b/detail_png/Shaft_02163_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..de91b5daded4de6b17d7da259550891e8bbe8d20 --- /dev/null +++ b/detail_png/Shaft_02163_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d9a9d2f38b28f914899aba0bd4c7619b39adaf6487a4ca21114e227690a6deb +size 18416 diff --git a/detail_png/Shaft_02163_length.png b/detail_png/Shaft_02163_length.png new file mode 100644 index 0000000000000000000000000000000000000000..adc2b5466d169b6e09017abc77eff3112ed818e5 --- /dev/null +++ b/detail_png/Shaft_02163_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44dabf29a98cde78b621497b4d6f45f9dd5af464c31ca652f30df149ece9275f +size 16342 diff --git a/detail_png/Shaft_02163_title.png b/detail_png/Shaft_02163_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8b5639692f541d904271391cb3fc8d7a7902411f --- /dev/null +++ b/detail_png/Shaft_02163_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04f7de43d852829becbcffe57897dce5979be2c29746059fa69157818fd2a203 +size 22234 diff --git a/detail_png/Shaft_02167_diam.png b/detail_png/Shaft_02167_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eb684f2c08b0a410f42f5a93aeff48fac72a63bd --- /dev/null +++ b/detail_png/Shaft_02167_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c7e428410d351a849813b0ccdac127ad9cb4141edcb0ab48d32e47e59add0de +size 32254 diff --git a/detail_png/Shaft_02167_length.png b/detail_png/Shaft_02167_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e747fa7347b4b4fdc0adcc15b2fe7266bc76f606 --- /dev/null +++ b/detail_png/Shaft_02167_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac7ba124423e673b76470113319aee2636d760469d28e17aa815a9ef8fab62e1 +size 34248 diff --git a/detail_png/Shaft_02167_title.png b/detail_png/Shaft_02167_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ac247945844b4b8afc2772760d8dfe7638c2a890 --- /dev/null +++ b/detail_png/Shaft_02167_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cf2e56d5218e7a2845f18aa08bd88b9c74c8c6389b28384ab4daff405c4f556 +size 31470 diff --git a/detail_png/Shaft_02168_diam.png b/detail_png/Shaft_02168_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..76b9872d5cb24f9012cd04224e19ed0d62e931c2 --- /dev/null +++ b/detail_png/Shaft_02168_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50c7ce8f8498c44a3bc8f029471e1434f7410eaa5093323f484e2c4ab30d3181 +size 19570 diff --git a/detail_png/Shaft_02168_length.png b/detail_png/Shaft_02168_length.png new file mode 100644 index 0000000000000000000000000000000000000000..116b50996a4b6964e838883ba8fcd84221253668 --- /dev/null +++ b/detail_png/Shaft_02168_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e004e60fa8cd831d9d0b850ec9b23a3ec3e86f598502e7e2d1ca1f5f99723eb +size 18300 diff --git a/detail_png/Shaft_02168_title.png b/detail_png/Shaft_02168_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5c8573ddfd3b6313615c3a169962c478b176dd40 --- /dev/null +++ b/detail_png/Shaft_02168_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80d9a448940bc5730bfb3b75d7afc2a1c3555750ec02f9d80bf7ef25c3eb6284 +size 30064 diff --git a/detail_png/Shaft_02172_diam.png b/detail_png/Shaft_02172_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a9db97dd087d81babfe1b0381e95f923ee51119 --- /dev/null +++ b/detail_png/Shaft_02172_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cbc5e3d5c135b9c4f527fb24f59a8a6596eb5dd6e782eb20bf1d67dd9db96d2 +size 29519 diff --git a/detail_png/Shaft_02172_length.png b/detail_png/Shaft_02172_length.png new file mode 100644 index 0000000000000000000000000000000000000000..83b34f4675c7a34bcc81874fbc7a649b23cfd184 --- /dev/null +++ b/detail_png/Shaft_02172_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:708da09ae0aef47dfabad6c86238374da2246d0cf6dd0f61878633c4ac748c35 +size 22669 diff --git a/detail_png/Shaft_02172_title.png b/detail_png/Shaft_02172_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31f49581cdba573433b4dc4e191a25c27f0f2af8 --- /dev/null +++ b/detail_png/Shaft_02172_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49b0fd0a565c424dd40383d18a766d82d56c90d27a570c4e2a209b42c1723c5c +size 20278 diff --git a/detail_png/Shaft_02180_diam.png b/detail_png/Shaft_02180_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1028f6f973d86996278fc6ec26251fece83c4d8a --- /dev/null +++ b/detail_png/Shaft_02180_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97aab72ece51f872f34bb845b0147dbecbbe6d343d749a80634ce15779fa2eda +size 19402 diff --git a/detail_png/Shaft_02180_length.png b/detail_png/Shaft_02180_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a89ff0e5a227c709707aa3133ebf25bc6792368e --- /dev/null +++ b/detail_png/Shaft_02180_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:712c28a392f1dc81056fc36fc3e37b9265e255b9c7e85e178fd93dc87a84971d +size 13957 diff --git a/detail_png/Shaft_02180_title.png b/detail_png/Shaft_02180_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8a126478db284fa00d9738463eb02a5717b771b9 --- /dev/null +++ b/detail_png/Shaft_02180_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:130de743dcb023854a46f2929dec361f69a163ba23cc01b7919606d69e5851bc +size 18699 diff --git a/detail_png/Shaft_02181_diam.png b/detail_png/Shaft_02181_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3183fc429e15cf7541868aa464e94c69a35db87e --- /dev/null +++ b/detail_png/Shaft_02181_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:572123dcf9b64933c04a966015dc66e00de61ef9dd563e6cae8bce661ff6f8ce +size 20380 diff --git a/detail_png/Shaft_02181_length.png b/detail_png/Shaft_02181_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d0ff10023ab2e11fc3b2c4bc589139e06495c535 --- /dev/null +++ b/detail_png/Shaft_02181_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e5b6c4a5c1c42e53ec74a07e93b88a14ca581f569a2761f0b43fb67367149d3 +size 15570 diff --git a/detail_png/Shaft_02181_title.png b/detail_png/Shaft_02181_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f2b848d58027dd67082522e038c74b6666f95ed6 --- /dev/null +++ b/detail_png/Shaft_02181_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4682e2ac9fac7dc4048393a1b6679c61c267bfccc6307ea7e2d7c81aa8df051 +size 14150 diff --git a/detail_png/Shaft_02182_diam.png b/detail_png/Shaft_02182_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..746d1d0565fbe4d99266f79785923a1f0fd977a8 --- /dev/null +++ b/detail_png/Shaft_02182_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1d81e56617aed05c5322be8a10842e17fd9d021170036b1271a2d4e7a66af6f +size 20514 diff --git a/detail_png/Shaft_02182_length.png b/detail_png/Shaft_02182_length.png new file mode 100644 index 0000000000000000000000000000000000000000..898852e54004364e51f3b91a4317e309649bfd3c --- /dev/null +++ b/detail_png/Shaft_02182_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1ea03a4f7f254669f45d44974d7c416f4f8b8c31f57d1243013bb98e367e326 +size 15246 diff --git a/detail_png/Shaft_02182_title.png b/detail_png/Shaft_02182_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f021a72064cac4b4ff0dd33a441c5d103d1f64f1 --- /dev/null +++ b/detail_png/Shaft_02182_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d117b2de7c01e465b3adb66abfccca42b8ed194d985d2096fa2c2f70d077f9e6 +size 18768 diff --git a/detail_png/Shaft_02188_diam.png b/detail_png/Shaft_02188_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..54c4bf9eb0cc3575a77f89b5e5bd63a5be5a4c5f --- /dev/null +++ b/detail_png/Shaft_02188_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:288917a74b83b447ec83705f3a2c2d4277c1fb1b7213ff29216fff93780ea478 +size 25125 diff --git a/detail_png/Shaft_02188_length.png b/detail_png/Shaft_02188_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0d9a29d088aea4d7687aeb0f0edf98e48d378bdc --- /dev/null +++ b/detail_png/Shaft_02188_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:919732090a17f7d025a8a7bc766b362738a83de0acd1de7462f5ec79b74256b1 +size 34295 diff --git a/detail_png/Shaft_02188_title.png b/detail_png/Shaft_02188_title.png new file mode 100644 index 0000000000000000000000000000000000000000..363ecd1135e6134e13a48f54355bc719d01ff698 --- /dev/null +++ b/detail_png/Shaft_02188_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e020972825965e51a3ff26944b752dd725404679d4de9ab5716332d0f7914632 +size 35919 diff --git a/detail_png/Shaft_02193_diam.png b/detail_png/Shaft_02193_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..db604e79a01827eba3eda95e338b288152b40e30 --- /dev/null +++ b/detail_png/Shaft_02193_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ede92fe66db5c1809560c966a4b1030afaad121a040ba601901549bf06226622 +size 25657 diff --git a/detail_png/Shaft_02193_length.png b/detail_png/Shaft_02193_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8afe080519b0c070333df363f6607bfebbaf9fa9 --- /dev/null +++ b/detail_png/Shaft_02193_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1095d83bafd27344b0d0ebea66a2daab774fcbd238b903d588a8e77781aedf69 +size 22340 diff --git a/detail_png/Shaft_02193_title.png b/detail_png/Shaft_02193_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e44bc007f276575fb11769d9073c61b7683020f9 --- /dev/null +++ b/detail_png/Shaft_02193_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:566da1fd4c6deba298a1be27773e1fb8e275ccf4bf60716eb3bec9214013e3ea +size 30924 diff --git a/detail_png/Shaft_02201_diam.png b/detail_png/Shaft_02201_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eba47f4856e8c97c815b812967480be1939dc893 --- /dev/null +++ b/detail_png/Shaft_02201_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a663d14a5736f1980fb1c9721b78e967d425a72bd67cffff7dac44e4d830eb9b +size 29853 diff --git a/detail_png/Shaft_02201_length.png b/detail_png/Shaft_02201_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9fd6b9b9829b658896bf43071b345b471a1e9b0a --- /dev/null +++ b/detail_png/Shaft_02201_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd94fca9c2be5fe1f8e48d57e705299ec4bb942e4478356c0f20bfb9e38aa310 +size 26078 diff --git a/detail_png/Shaft_02201_title.png b/detail_png/Shaft_02201_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0607a48747f2358289722caeea0ae19d67809102 --- /dev/null +++ b/detail_png/Shaft_02201_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a0f790c7dfe28fcb745092c1a7f345383ea5dfd77005793f87749e5f8f0d0b7 +size 34545 diff --git a/detail_png/Shaft_02202_diam.png b/detail_png/Shaft_02202_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f78cd950f3e75a7e36c29b5dc2fc0f1e3d101187 --- /dev/null +++ b/detail_png/Shaft_02202_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a5a1ba03635510818324c3557222441a232c59ef9c4005f9c8de374f1acda12 +size 18337 diff --git a/detail_png/Shaft_02202_length.png b/detail_png/Shaft_02202_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3514b34b31a1fea9841c91337e769552d2eafd42 --- /dev/null +++ b/detail_png/Shaft_02202_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cee3c442632c1b1f75403c123db39974ec54c001d9cf92bc2d1db98df62066b8 +size 25769 diff --git a/detail_png/Shaft_02202_title.png b/detail_png/Shaft_02202_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4594d514873e736d249baceaf526c3e4ed2fda06 --- /dev/null +++ b/detail_png/Shaft_02202_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3edabd89d72d6541b92a2043f8501db4ccd2f7ed3ee8fd07c9847a1bc668b07 +size 32686 diff --git a/detail_png/Shaft_02210_diam.png b/detail_png/Shaft_02210_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c7f8a7da49902bb5e879fe0827c337e6f05bdb8e --- /dev/null +++ b/detail_png/Shaft_02210_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:180efd24b1dbc1de142057e28409ce2cb7c10f8aac39f73a7fa06e6592131dce +size 20504 diff --git a/detail_png/Shaft_02210_length.png b/detail_png/Shaft_02210_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d32bbd65fddbfd65bb23b817465fbb277fb858c4 --- /dev/null +++ b/detail_png/Shaft_02210_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14046ea1dc34bb3f1628f477fd3bebd5e1933990876b822ac576e2883876e0ad +size 18151 diff --git a/detail_png/Shaft_02210_title.png b/detail_png/Shaft_02210_title.png new file mode 100644 index 0000000000000000000000000000000000000000..44bd9d8d860315d7a689d6af51969b58ab7ca722 --- /dev/null +++ b/detail_png/Shaft_02210_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e37eb5c87f76c878817f0bf1a71ad68b6a2233ef6a7eb77d94817ac0a4e5365f +size 17959 diff --git a/detail_png/Shaft_02214_diam.png b/detail_png/Shaft_02214_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..306dfb38c20c003ee05ed453c7f21ac70a5215f7 --- /dev/null +++ b/detail_png/Shaft_02214_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49ea9670060ef9f3e2121e27fc13a26e159b5b272fa23e558c2b218ddb7ad9fc +size 36056 diff --git a/detail_png/Shaft_02214_length.png b/detail_png/Shaft_02214_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a85cdb1c8aef88f5df1a455de7905fa37c8e7c4e --- /dev/null +++ b/detail_png/Shaft_02214_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf9d38d8ce1ece678d21ad2de8ed99edc168e0e0c99afb5b17eea5fb6a59e506 +size 41498 diff --git a/detail_png/Shaft_02214_title.png b/detail_png/Shaft_02214_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4094409955e61277cbc4bfd207f5831dae191875 --- /dev/null +++ b/detail_png/Shaft_02214_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:037f58baa6bf2c3a2fb9e7c2f4dc913172b516d5febd84ce5a6f422bb7244fcf +size 31147 diff --git a/detail_png/Shaft_02215_diam.png b/detail_png/Shaft_02215_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fee9422dcce6c8905b6106f74aba631be76ee177 --- /dev/null +++ b/detail_png/Shaft_02215_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c580ca0d22da707abb1b3807107c37b0b7f0008b50db19fa9b8d09aa43f5fe8 +size 24716 diff --git a/detail_png/Shaft_02215_length.png b/detail_png/Shaft_02215_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1ae9316e4156f5525b6a11baecb94ffa5a7b198 --- /dev/null +++ b/detail_png/Shaft_02215_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4e3f962ce60b7db00ad3369fbd3fb623801a27302eb04d9892abba9ce9039c5 +size 27041 diff --git a/detail_png/Shaft_02215_title.png b/detail_png/Shaft_02215_title.png new file mode 100644 index 0000000000000000000000000000000000000000..672f773d62f467f881741843d5527e45feaf8f8b --- /dev/null +++ b/detail_png/Shaft_02215_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8a0b770fc9c4bde1ef0fe36a0783130774006b26f9afc5d8d2e35b6850e9d50 +size 31687 diff --git a/detail_png/Shaft_02220_diam.png b/detail_png/Shaft_02220_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ad163e1f4394e468cf079720a83fe64021ddc3da --- /dev/null +++ b/detail_png/Shaft_02220_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8d8c0625b46fa5c02d6db7bb9936c1af5d18eb98be74b42946560a98906ea8b +size 20329 diff --git a/detail_png/Shaft_02220_length.png b/detail_png/Shaft_02220_length.png new file mode 100644 index 0000000000000000000000000000000000000000..71375d1ee89fb54a20c5b896689696d419fe9bcc --- /dev/null +++ b/detail_png/Shaft_02220_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8bc160a99c4232877d705961d2d316b518f19148044f913852fd743314571db +size 16404 diff --git a/detail_png/Shaft_02220_title.png b/detail_png/Shaft_02220_title.png new file mode 100644 index 0000000000000000000000000000000000000000..af850dbd02c67e29f2bdf1ab034b5a31ea4edbae --- /dev/null +++ b/detail_png/Shaft_02220_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:829c8b35efb54ae61b6ebcb09a542e3cc826c23383b8b3b508ba23068777cc20 +size 25786 diff --git a/detail_png/Shaft_02221_diam.png b/detail_png/Shaft_02221_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b84a0725d2ba2e357e5cc8c8932531ac96b36be2 --- /dev/null +++ b/detail_png/Shaft_02221_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4078e37ba4d3312390a7cb2bf625e38039b15e83c85c745b112024cede8ad661 +size 25926 diff --git a/detail_png/Shaft_02221_length.png b/detail_png/Shaft_02221_length.png new file mode 100644 index 0000000000000000000000000000000000000000..34396023cfdb7f6937c3ba2664c031089e2e26e2 --- /dev/null +++ b/detail_png/Shaft_02221_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c1e24527777c68aed342087cad8c44696eb9668094fc3732050e22ab44621a6 +size 29580 diff --git a/detail_png/Shaft_02221_title.png b/detail_png/Shaft_02221_title.png new file mode 100644 index 0000000000000000000000000000000000000000..099b88b3b600ce4d368858b966e26a33eaa145f4 --- /dev/null +++ b/detail_png/Shaft_02221_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86ca889c096cd70b7760b897d314f4d0982bc50df6525b2e466b7edc8df3fe4b +size 28359 diff --git a/detail_png/Shaft_02224_diam.png b/detail_png/Shaft_02224_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bdc69dc86d2d7c2f5580dc7ec6bde4091a21cc5c --- /dev/null +++ b/detail_png/Shaft_02224_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b4658d202e2e71b6a17c7faae30e50b9bd7789a5c9dbc6631ac1647011b1322 +size 23560 diff --git a/detail_png/Shaft_02224_length.png b/detail_png/Shaft_02224_length.png new file mode 100644 index 0000000000000000000000000000000000000000..75b7b50332edda5fef1db530e6c3f9e55cf2cccd --- /dev/null +++ b/detail_png/Shaft_02224_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2003bef0cedb63300644bc96dfb561efb57a3e73d79553ffa81165bdeb690f17 +size 30086 diff --git a/detail_png/Shaft_02224_title.png b/detail_png/Shaft_02224_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ef03f3fe7d1258b1108d0d3a24de44e3b8996c73 --- /dev/null +++ b/detail_png/Shaft_02224_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cce2e304bd5efc448af4e1739853704af4c62e84d2af5c83c08b8c2d6136261 +size 29538 diff --git a/detail_png/Shaft_02225_diam.png b/detail_png/Shaft_02225_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5ed2cb697552c2b7acf8486fe933b109c3156123 --- /dev/null +++ b/detail_png/Shaft_02225_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c212321555536cd84dfefc2f464c1419b70ccc63b13a01862b74d638d813b83d +size 24299 diff --git a/detail_png/Shaft_02225_length.png b/detail_png/Shaft_02225_length.png new file mode 100644 index 0000000000000000000000000000000000000000..da7869496be9cb7d5ad77866df9382d8750ea841 --- /dev/null +++ b/detail_png/Shaft_02225_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55766c8d69c92dff501e524c0215064fdce15dce4d45c05416ba49e9f65a41ee +size 19713 diff --git a/detail_png/Shaft_02225_title.png b/detail_png/Shaft_02225_title.png new file mode 100644 index 0000000000000000000000000000000000000000..09164bf845585dd09f031c3bb8c18ce26c0e6d56 --- /dev/null +++ b/detail_png/Shaft_02225_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f09376a276f0a382ad67584b81e7c177b8b08d01f05152fd2be220af0fc0fe97 +size 18795 diff --git a/detail_png/Shaft_02226_diam.png b/detail_png/Shaft_02226_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f72db568cdd985011afddecdef08c218a02d1978 --- /dev/null +++ b/detail_png/Shaft_02226_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c5621b38935a9f4bf4c1b8c5688cf79977742bba6cb29f6a0c4068cb9ebbbc3 +size 35812 diff --git a/detail_png/Shaft_02226_length.png b/detail_png/Shaft_02226_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8e5f8701a54a2f1a9a557fbfb027413ed673db18 --- /dev/null +++ b/detail_png/Shaft_02226_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e9ed58e431caed809b3da6ae2f7afd2432fab4d5869242f432a515976ef9b3b +size 37959 diff --git a/detail_png/Shaft_02226_title.png b/detail_png/Shaft_02226_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be26380785ffe8d135b61df522e2acfa8cbd4e52 --- /dev/null +++ b/detail_png/Shaft_02226_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a73441e8b2e9efa2590e9a41e6dafcc66f23b9581a4df0db6129f3daaa973a12 +size 32471 diff --git a/detail_png/Shaft_02230_diam.png b/detail_png/Shaft_02230_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0fb24feae661d1f98e915984cefdf60f47638459 --- /dev/null +++ b/detail_png/Shaft_02230_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fadf83894eaabf2ce9536e6293dfb9b60ecad0700330beff75f2ac9f22d00afb +size 25498 diff --git a/detail_png/Shaft_02230_length.png b/detail_png/Shaft_02230_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6a41e8bd80f2fcc27e510f25f4728bc74b604089 --- /dev/null +++ b/detail_png/Shaft_02230_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b882eb750bba03b3903fe0f22489b08c25d1bf8231b587bbb51954354b45e86c +size 34883 diff --git a/detail_png/Shaft_02230_title.png b/detail_png/Shaft_02230_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7bb94c3e0b85c3dcd1367561749dea3f0aa0b77c --- /dev/null +++ b/detail_png/Shaft_02230_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96b203feaac746fa792c1b3fdab7a0f7a31cbbb95646792cd11115fc49a31b25 +size 36362 diff --git a/detail_png/Shaft_02232_diam.png b/detail_png/Shaft_02232_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..321aef908e718ba86869c6a2e826dd7c67102fc4 --- /dev/null +++ b/detail_png/Shaft_02232_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:173c3cf5fc77c3cae9df379bf8852ee1c4a4544bceacce6b70febbbcf7b0434b +size 32221 diff --git a/detail_png/Shaft_02232_length.png b/detail_png/Shaft_02232_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bddd829e5db9a3f3acb02f6d0e93291d9e524ecb --- /dev/null +++ b/detail_png/Shaft_02232_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b60fc39f9fe2c9a17abb279311f1a8d3db6cf531d488e3f4fae0412ef2ee6c69 +size 34414 diff --git a/detail_png/Shaft_02232_title.png b/detail_png/Shaft_02232_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c50e807e81506af9e40003c783f6020ffa6edd07 --- /dev/null +++ b/detail_png/Shaft_02232_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edcd121dd0838869946a5306531dda2c10e940e9147aab0e11523b7424ed9d3d +size 32197 diff --git a/detail_png/Shaft_02236_diam.png b/detail_png/Shaft_02236_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4ac010e4d340ca9299168c728e4dff7dafcb7ee7 --- /dev/null +++ b/detail_png/Shaft_02236_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd37ef1bd422c7963bc8d9de4446c47cec6be4d96050264840ea1be76f44fb3d +size 26702 diff --git a/detail_png/Shaft_02236_length.png b/detail_png/Shaft_02236_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2d6b156ea6756105eb2fcab1303c38082fcbf13c --- /dev/null +++ b/detail_png/Shaft_02236_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bfddccde045823461431afcdeb60a27e8e138919c4620e493bab86acff04e4f +size 38599 diff --git a/detail_png/Shaft_02236_title.png b/detail_png/Shaft_02236_title.png new file mode 100644 index 0000000000000000000000000000000000000000..01e6675fff48f8eb99a95e97474a7c0a23ae0b16 --- /dev/null +++ b/detail_png/Shaft_02236_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80b43f7b7f99c15281ebb0ca0e81225a45ec4497db0196e2ab3ca3d8bc34bddc +size 30422 diff --git a/detail_png/Shaft_02238_diam.png b/detail_png/Shaft_02238_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e05c063eb1853d96e314b1c104112f21e90c57df --- /dev/null +++ b/detail_png/Shaft_02238_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fb2eb7c3bea7a8d2878efb3653048c7ec210b1ad6a8c0e841e27006aa792ac7 +size 20489 diff --git a/detail_png/Shaft_02238_length.png b/detail_png/Shaft_02238_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b9f61ac2254c72035eb1a005f400deae19d15396 --- /dev/null +++ b/detail_png/Shaft_02238_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0d451f58903f58fa210d4d2550c60db775a04d39f0ab40e865cfc72815c5c22 +size 19843 diff --git a/detail_png/Shaft_02238_title.png b/detail_png/Shaft_02238_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9e660414d39f81fe4194360d8bfd3bfff8799e37 --- /dev/null +++ b/detail_png/Shaft_02238_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:428befaeb46d193f8e15297a85ac740c081bd23b32edef77bb7ccfbd963cdb7e +size 26149 diff --git a/detail_png/Shaft_02243_diam.png b/detail_png/Shaft_02243_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7add275fa826e1e2952c52486a842b916b5b6e2f --- /dev/null +++ b/detail_png/Shaft_02243_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2cbbe4e05c6626e66accf14331eb43891a1bee6feb9e10d7cbbb017bc8fea17 +size 20348 diff --git a/detail_png/Shaft_02243_length.png b/detail_png/Shaft_02243_length.png new file mode 100644 index 0000000000000000000000000000000000000000..869c35cc34de64f017506e432988eac491e95207 --- /dev/null +++ b/detail_png/Shaft_02243_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ac48825f16ace4a0c5b7e9996b5debc3ceecc41ca9cee9aa50a2b71b3fe6d20 +size 19063 diff --git a/detail_png/Shaft_02243_title.png b/detail_png/Shaft_02243_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b673277879cce397370810265fc0a456191f20d2 --- /dev/null +++ b/detail_png/Shaft_02243_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a5c2e353b675040f6eae251c2cd8bc04b1158fbf63c41367351b85f76a997e5 +size 32005 diff --git a/detail_png/Shaft_02245_diam.png b/detail_png/Shaft_02245_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..444721164ce580710fdabdccc7ae4dab7bb9bce7 --- /dev/null +++ b/detail_png/Shaft_02245_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9512ef1be1649c4bffd347643f8cb37b64992b982d665ac96242344341f466da +size 25952 diff --git a/detail_png/Shaft_02245_length.png b/detail_png/Shaft_02245_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8d08f08e145cd4c0402940c0cb31c7a27030f66e --- /dev/null +++ b/detail_png/Shaft_02245_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e8ff985acd5cac7f16c59778891e5c200d9c11dc1eecee2a7558930ab7599fe +size 20431 diff --git a/detail_png/Shaft_02245_title.png b/detail_png/Shaft_02245_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7695f6ac83dffc521664f6da21cfe39c767f9375 --- /dev/null +++ b/detail_png/Shaft_02245_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f200189098a1ae9d45ec1afb246ff15ec90a82671d998c344006b39b6923ad40 +size 21829 diff --git a/detail_png/Shaft_02248_diam.png b/detail_png/Shaft_02248_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dbcbb0ad6b581b72ac88b4b71333137f0fc80ab2 --- /dev/null +++ b/detail_png/Shaft_02248_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a35208322526c73c48314c9b0ffef54a310a216f3049a15115ae48704ab8684c +size 35927 diff --git a/detail_png/Shaft_02248_length.png b/detail_png/Shaft_02248_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d089ca2037e1ae3e173a28c3bef5c151282a95df --- /dev/null +++ b/detail_png/Shaft_02248_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fefe1a8f0be6c370d10627be5899ea3c6003fb943991fe37a07409edb928471 +size 23385 diff --git a/detail_png/Shaft_02248_title.png b/detail_png/Shaft_02248_title.png new file mode 100644 index 0000000000000000000000000000000000000000..95641ea37317e22c99ead9ea457600ac4333ef06 --- /dev/null +++ b/detail_png/Shaft_02248_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13200487e61b72f437666e8de7f1742b032ce914e725c83b26e2e642a99e247c +size 21955 diff --git a/detail_png/Shaft_02252_diam.png b/detail_png/Shaft_02252_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b7497957577f2fe9292ec733b69f2cf75c0bb1b4 --- /dev/null +++ b/detail_png/Shaft_02252_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d3256fadd623e2969e30ef8f52aa15e4072431ebc14fde2e76cad681e663874 +size 27383 diff --git a/detail_png/Shaft_02252_length.png b/detail_png/Shaft_02252_length.png new file mode 100644 index 0000000000000000000000000000000000000000..99cc70d5d6c2dd3a22c4544e1266b5e957c20de1 --- /dev/null +++ b/detail_png/Shaft_02252_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:620c38ff5a9eb94487e138b5f9d9ac4deb8c8183b960b152955e92431921322e +size 39199 diff --git a/detail_png/Shaft_02252_title.png b/detail_png/Shaft_02252_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a2e7fa851e2ead122d168073c8543ae7a1a639e --- /dev/null +++ b/detail_png/Shaft_02252_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4eeb3190c30b020d892846c32a08f1d05d2e11ad8e5f29a23c38ea08a8376eef +size 35743 diff --git a/detail_png/Shaft_02253_diam.png b/detail_png/Shaft_02253_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d5492fc0a0788ebfb48a564ebae5b033a3b92ef6 --- /dev/null +++ b/detail_png/Shaft_02253_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7b64bf7c62d827ab048f18b119ca897a5ae5d5a19472e932981b61c960c5f20 +size 27473 diff --git a/detail_png/Shaft_02253_length.png b/detail_png/Shaft_02253_length.png new file mode 100644 index 0000000000000000000000000000000000000000..91cfa8e5253195f366192c9df7f01127935607ec --- /dev/null +++ b/detail_png/Shaft_02253_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65dbb2e150d309dbb86ff2a3090de9b478da168aa554ad78fb75153c89bfe69c +size 23489 diff --git a/detail_png/Shaft_02253_title.png b/detail_png/Shaft_02253_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d02eeee5f422b7bb5d473cb339273917253db12a --- /dev/null +++ b/detail_png/Shaft_02253_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84fcea5328086a89ee6112999464ad26a387dbfd845c84180495035e8552efac +size 23387 diff --git a/detail_png/Shaft_02254_diam.png b/detail_png/Shaft_02254_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..307931b868d24980a00da977d808230344fce0e5 --- /dev/null +++ b/detail_png/Shaft_02254_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97f55e67e535b8517b146bc4858e1a34b6d04540f554239fa691fdd9ba8d883d +size 33060 diff --git a/detail_png/Shaft_02254_length.png b/detail_png/Shaft_02254_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8d85140c80461283cd6fb3f8c3dd46550afc4e5f --- /dev/null +++ b/detail_png/Shaft_02254_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:036b4f63943469a47f3f886b4b15abced2b04e8c4d6e96ceddcd76afac7811d0 +size 43858 diff --git a/detail_png/Shaft_02254_title.png b/detail_png/Shaft_02254_title.png new file mode 100644 index 0000000000000000000000000000000000000000..44a91c496ee78c2e2a979ea63d781356a20c8ce3 --- /dev/null +++ b/detail_png/Shaft_02254_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eac6834051bd25c673003929ada3830bd4dffb18e2b1eebc59033ba359dc0e45 +size 32284 diff --git a/detail_png/Shaft_02257_diam.png b/detail_png/Shaft_02257_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fde228063fde1cffc50e02154e086073cc7f3cb8 --- /dev/null +++ b/detail_png/Shaft_02257_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1efa6ecb15157622cf5c2a387c178f15b76b017a39d81782097580537972c8c3 +size 35709 diff --git a/detail_png/Shaft_02257_length.png b/detail_png/Shaft_02257_length.png new file mode 100644 index 0000000000000000000000000000000000000000..88173256c211634a3dcc0e1c9a64591ff2fa8b1b --- /dev/null +++ b/detail_png/Shaft_02257_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e78f2de6be2aa3e98a856b1e89124b679b9692290b3555c3b19f1980745ebb5 +size 38896 diff --git a/detail_png/Shaft_02257_title.png b/detail_png/Shaft_02257_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a66b28d3f44bdcdafe8298f8003e610c9aa65930 --- /dev/null +++ b/detail_png/Shaft_02257_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b27594cf7dfac60d3698c3058b512b07c7df2658d51905ccb390bfc07e7a31c +size 28816 diff --git a/detail_png/Shaft_02258_diam.png b/detail_png/Shaft_02258_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a8d6604d339fa743783d813c0b79c2fb08b2ad9d --- /dev/null +++ b/detail_png/Shaft_02258_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1335c6f98b9296a5f2b5b71c780dd3416f42f83f0b82f72d5d65462d7ab32365 +size 30835 diff --git a/detail_png/Shaft_02258_length.png b/detail_png/Shaft_02258_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b416357259ec22c228a41bccf11537d6bdfae7cc --- /dev/null +++ b/detail_png/Shaft_02258_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b734d1acb2eb12a0273867142c74baa434e324c47fdba2cf6ce76d2ddadb3fb +size 43251 diff --git a/detail_png/Shaft_02258_title.png b/detail_png/Shaft_02258_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7cd5acee6f5faefa3cd27564bf252c88a29e4d5d --- /dev/null +++ b/detail_png/Shaft_02258_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12bc338c096add15b48945ea5b2792351bdf5f69e65ceef57147e4539969446b +size 30413 diff --git a/detail_png/Shaft_02269_diam.png b/detail_png/Shaft_02269_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4a667d1e2f92b25447ffd04b7b3b2c92944e4383 --- /dev/null +++ b/detail_png/Shaft_02269_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13c7115898f2a20f759f68ef413d20515a8cc2908792f69b06ea73272099c61c +size 29408 diff --git a/detail_png/Shaft_02269_length.png b/detail_png/Shaft_02269_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fcb890cff1f6cbe8103254d8e627e803591d4765 --- /dev/null +++ b/detail_png/Shaft_02269_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31ea2eb60bd8556dcbd5f1e7285e436ea85018c1965cf6dc7f2084e5e5852dc0 +size 43730 diff --git a/detail_png/Shaft_02269_title.png b/detail_png/Shaft_02269_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e2267cf483d1f7c0c2913b0ba0824e6b88ceeb3d --- /dev/null +++ b/detail_png/Shaft_02269_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05c919017b57c5afa7b1f51c241dc47132f1802090a6fee5cff015b4afee3d91 +size 31187 diff --git a/detail_png/Shaft_02272_diam.png b/detail_png/Shaft_02272_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..553d9e1ee62bf24198c4e308e5f076f2dc269131 --- /dev/null +++ b/detail_png/Shaft_02272_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d18393dc2091179d3aa8dc91f641df51c0f7b7c6f9e1072830547a71af4193c9 +size 24671 diff --git a/detail_png/Shaft_02272_length.png b/detail_png/Shaft_02272_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e4b9efee89a2e0b62e635c495574519e6ad050e1 --- /dev/null +++ b/detail_png/Shaft_02272_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6638d9f241893493873775cd5f1d4a1e13a23ff29e7bec43355fc04e5a5966c7 +size 19636 diff --git a/detail_png/Shaft_02272_title.png b/detail_png/Shaft_02272_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9deae4de792905daf7eebcaf288d40d9a23afa01 --- /dev/null +++ b/detail_png/Shaft_02272_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b75751ddf32781f26f3ab68e4438adf84271e666411b4ded80d8dc10f81b2f57 +size 18783 diff --git a/detail_png/Shaft_02276_diam.png b/detail_png/Shaft_02276_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b6c80be84a64903a4df80bdfda393b1e07f6f8a1 --- /dev/null +++ b/detail_png/Shaft_02276_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19a82f1de6999b156f8cf50088a1748f84f9ada2da48daa493d4e284568624fb +size 24624 diff --git a/detail_png/Shaft_02276_length.png b/detail_png/Shaft_02276_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a0a6c6769f54e27d04e4ece01f80f0a6835514a9 --- /dev/null +++ b/detail_png/Shaft_02276_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d629ea66f4c6f77355e77ea2711940dffd11207afe7e9c332da42c1f6bf038a2 +size 20545 diff --git a/detail_png/Shaft_02276_title.png b/detail_png/Shaft_02276_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a2ad87afd67ae751100a43d560eb269ee75fd159 --- /dev/null +++ b/detail_png/Shaft_02276_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a5abc4bf5ff8d956b7930f6daf50ffc14a2b9fbbd76aefc42069fb1115e20ab +size 28782 diff --git a/detail_png/Shaft_02280_diam.png b/detail_png/Shaft_02280_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e087ba7d66f19e1081edebce6d69861cd2fb4f10 --- /dev/null +++ b/detail_png/Shaft_02280_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3a8f1a9faa5f0faeb9aee82a7aa5f573d63281149a003fa554c825135655614 +size 25319 diff --git a/detail_png/Shaft_02280_length.png b/detail_png/Shaft_02280_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1a92d9bad2917521836060fc5c662c95e4377d22 --- /dev/null +++ b/detail_png/Shaft_02280_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d939cea5092dba3995450319392c7f691cfd605881ecf1aaf2082e70c2eab946 +size 21640 diff --git a/detail_png/Shaft_02280_title.png b/detail_png/Shaft_02280_title.png new file mode 100644 index 0000000000000000000000000000000000000000..231f8b66e2d2650efc4577fde46d60c55ba2f3e3 --- /dev/null +++ b/detail_png/Shaft_02280_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad500c3515ebc7b1611bd41581bd009896430386d8889b1db46dd5e12d6ea459 +size 18843 diff --git a/detail_png/Shaft_02284_diam.png b/detail_png/Shaft_02284_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0450212a3bcc2d66e0dd0311475405bcfa3e8327 --- /dev/null +++ b/detail_png/Shaft_02284_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6e35e64f27f3039d3d323d5e3b46b07d613736f88cf5b765cde31e3c398401d +size 19944 diff --git a/detail_png/Shaft_02284_length.png b/detail_png/Shaft_02284_length.png new file mode 100644 index 0000000000000000000000000000000000000000..76179189b96b784958a6d281ba9a7c425dd60397 --- /dev/null +++ b/detail_png/Shaft_02284_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ef718a48505fd3bde4756698fae5ed358eb4459775fb8a96561ad3a5dfbe0be +size 16115 diff --git a/detail_png/Shaft_02284_title.png b/detail_png/Shaft_02284_title.png new file mode 100644 index 0000000000000000000000000000000000000000..18fcec8db4abcfc7e3ceddf344ba530c3a27e5b2 --- /dev/null +++ b/detail_png/Shaft_02284_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a57577d2affc001d75f778d813ec4032bd91c9f3a59b9a7f94cacf711211276 +size 15694 diff --git a/detail_png/Shaft_02294_diam.png b/detail_png/Shaft_02294_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f11a9838c14fdbd066e60cc5553f8c3b39f99379 --- /dev/null +++ b/detail_png/Shaft_02294_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06a0e93c4081eca28992d3886bb82e7b1ec2160bfec7a7ed1c74082f31e16f17 +size 35030 diff --git a/detail_png/Shaft_02294_length.png b/detail_png/Shaft_02294_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c759d569b8720c3b561d2243482ec19839b19b1 --- /dev/null +++ b/detail_png/Shaft_02294_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9242c79d2940d2da0d312f69a7f1f288956be67bc5986b65a2dc0bd7089d9a9 +size 31118 diff --git a/detail_png/Shaft_02294_title.png b/detail_png/Shaft_02294_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c02c7d7d2f9b33c1b1f299f333867a2a159c922 --- /dev/null +++ b/detail_png/Shaft_02294_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9945dae700eb7c6cf84ac7085e4f929090f393c4434190761270545aef3e08ff +size 33417 diff --git a/detail_png/Shaft_02301_diam.png b/detail_png/Shaft_02301_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7243de4d1422b47ac8211fd9cf0ba9c7d6a7aa31 --- /dev/null +++ b/detail_png/Shaft_02301_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fea25187acb5bfb8cb363fb147ad7b5123e6187ae7ae1abe1e528873c31f5b5 +size 19044 diff --git a/detail_png/Shaft_02301_length.png b/detail_png/Shaft_02301_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e13e1f2724f4ea6b533eeaee518b54a94835c347 --- /dev/null +++ b/detail_png/Shaft_02301_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:443030215424791710e7fe62d8aefc26f6f62f51ad78f73ae41cd1235bb67ac5 +size 14991 diff --git a/detail_png/Shaft_02301_title.png b/detail_png/Shaft_02301_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9fc9a1461c62879c2361c39398ddd50d8a00c566 --- /dev/null +++ b/detail_png/Shaft_02301_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60e9d99a54e18ef9cc1dee1b799fa74ec1b5de46224017ce1fb3ede65a418459 +size 18891 diff --git a/detail_png/Shaft_02305_diam.png b/detail_png/Shaft_02305_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8c0d40585097ba7895b90faf8e7b50ef538a9a48 --- /dev/null +++ b/detail_png/Shaft_02305_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e62b9e20c61623da7eaa27ebeb59873c822bea46316046cca9eedc80ffd3bad +size 26101 diff --git a/detail_png/Shaft_02305_length.png b/detail_png/Shaft_02305_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bdd5fc5f155ad1b9fd0b525447f90f08d1442e53 --- /dev/null +++ b/detail_png/Shaft_02305_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd1f73e360c936ef1dfaaf3ba2ae07aa47c84a8c9acc4d0411527f7809eafd34 +size 37620 diff --git a/detail_png/Shaft_02305_title.png b/detail_png/Shaft_02305_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fa6f8cf3b74064770064131e4a78e284a5a19fc8 --- /dev/null +++ b/detail_png/Shaft_02305_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63798b6d66fb46b547c703d1426fa27102c60d99eb3eff5cca44c7f078eef13f +size 33035 diff --git a/detail_png/Shaft_02318_diam.png b/detail_png/Shaft_02318_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..77493db0fe27a5aa7b60e5145c322ab09bca408f --- /dev/null +++ b/detail_png/Shaft_02318_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75e80553a5c35322c05c2525e0bd22f9f2157c68452ce5fec7816a35253affdd +size 36968 diff --git a/detail_png/Shaft_02318_length.png b/detail_png/Shaft_02318_length.png new file mode 100644 index 0000000000000000000000000000000000000000..57e27140b0e623148297019a6e71a3252093533f --- /dev/null +++ b/detail_png/Shaft_02318_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a69f10b605d12bd1c70c4343dfbd76bb696294f104e239c881b8c4eb3cb83e31 +size 50167 diff --git a/detail_png/Shaft_02318_title.png b/detail_png/Shaft_02318_title.png new file mode 100644 index 0000000000000000000000000000000000000000..166fee48c3ea257c75de5a4417ceca1a4ea75f66 --- /dev/null +++ b/detail_png/Shaft_02318_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a01b8a7076b0dd17fd7e523003b05d57968124e43149f2ce84d761b50700438 +size 29829 diff --git a/detail_png/Shaft_02323_diam.png b/detail_png/Shaft_02323_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6d81fa6819b908b4645aadd0b1dc9d58d1269b55 --- /dev/null +++ b/detail_png/Shaft_02323_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79db1eb48be25ae32447a24e9696b6a7dd0249dd7a615b619fcde20098e619fd +size 23135 diff --git a/detail_png/Shaft_02323_length.png b/detail_png/Shaft_02323_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b3cc9b17cac1428f2f2fd797b8761473a6f061b4 --- /dev/null +++ b/detail_png/Shaft_02323_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ffc28e352fec313f13d36d1b4fea51b8ba43be08ba819cf4e2ffcfee1b12d29 +size 19291 diff --git a/detail_png/Shaft_02323_title.png b/detail_png/Shaft_02323_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31006966b111aa55deec7f10cba72e7259487022 --- /dev/null +++ b/detail_png/Shaft_02323_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43831aa26290213d4db3ef3c67d963e268bbbc5c5bc127e23d7feb40681369b3 +size 18805 diff --git a/detail_png/Shaft_02330_diam.png b/detail_png/Shaft_02330_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a09b8a568960478cdb2e0d7753ddac5ada7ed73f --- /dev/null +++ b/detail_png/Shaft_02330_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28a13abfdff69bc87d69902b49866d6eb69d760c3a81930bdd11bb99aa6f69dc +size 23540 diff --git a/detail_png/Shaft_02330_length.png b/detail_png/Shaft_02330_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13b6b36e54b0e25903350df7b4bc66792f1977f1 --- /dev/null +++ b/detail_png/Shaft_02330_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17fe3844c04b1bddd1885de425d19138f04ddfcd56637c9626c32d2119cc2166 +size 19740 diff --git a/detail_png/Shaft_02330_title.png b/detail_png/Shaft_02330_title.png new file mode 100644 index 0000000000000000000000000000000000000000..52c828fc6f8a3346d9986f81eb03142bc19795e2 --- /dev/null +++ b/detail_png/Shaft_02330_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4d51f1e77489927c35b1e69e7ff403b27d75386f45364811f3d39f2e067eb9a +size 18786 diff --git a/detail_png/Shaft_02331_diam.png b/detail_png/Shaft_02331_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cc2ba0a80f65c1e00d93bb8e59ba0cdc094493a7 --- /dev/null +++ b/detail_png/Shaft_02331_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0541fdb13230b1ebd103a14704c11a7f846a3e13e370882cf022558e6b72e10f +size 20647 diff --git a/detail_png/Shaft_02331_length.png b/detail_png/Shaft_02331_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f86813010273c61431244d5e1395187232e2dd91 --- /dev/null +++ b/detail_png/Shaft_02331_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a56a5c0f7fef89586d6224706dae438b516378c004c652cf18cbd82b8f3c9a2 +size 16266 diff --git a/detail_png/Shaft_02331_title.png b/detail_png/Shaft_02331_title.png new file mode 100644 index 0000000000000000000000000000000000000000..66cb7cfb822add54f8bfea30e04b2e6e2ee6d59a --- /dev/null +++ b/detail_png/Shaft_02331_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b525c878158453e1e6e87a048cddff5d17e08cb56f85d906417245b43aa298e6 +size 15758 diff --git a/detail_png/Shaft_02342_diam.png b/detail_png/Shaft_02342_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..988c9fab7425c42d19fccbb50f5f94b347f75c5b --- /dev/null +++ b/detail_png/Shaft_02342_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d971bd771e40bea3cbb5f4663c7a697fad2d35b3f32b9b1a13c655bd7133fbc +size 20012 diff --git a/detail_png/Shaft_02342_length.png b/detail_png/Shaft_02342_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8ba4c82908ae3db168aa6e11984218c17f4a7d4f --- /dev/null +++ b/detail_png/Shaft_02342_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eec15d8e7a8c6c5e14be62a021ad8de6764b2d91a17a56f3cda23617315c830c +size 15001 diff --git a/detail_png/Shaft_02342_title.png b/detail_png/Shaft_02342_title.png new file mode 100644 index 0000000000000000000000000000000000000000..000e16557b1428f5ac1aff5d5c0dcb9c2fd82753 --- /dev/null +++ b/detail_png/Shaft_02342_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d5fc7ec660763358b0b4a5d2acbd0a13a7cecd1d75ff5cc1a8e91f8377b72c6 +size 18753 diff --git a/detail_png/Shaft_02343_diam.png b/detail_png/Shaft_02343_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..894c07b4299768614a4825c590b26202e65e0d35 --- /dev/null +++ b/detail_png/Shaft_02343_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b48168f7899da41691456965b97fed687bc4a53f260aa633172e6ecf394c9ef2 +size 26764 diff --git a/detail_png/Shaft_02343_length.png b/detail_png/Shaft_02343_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f529182e0e7e9cc92d34ee3fc9961ae539dad3f --- /dev/null +++ b/detail_png/Shaft_02343_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b56803d47292a8f4aea63be60a2fa63ecd9487fb5f85e27bb8949302b955b8b1 +size 37216 diff --git a/detail_png/Shaft_02343_title.png b/detail_png/Shaft_02343_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f16fcb8e57ddd4f9749186db7f8888985d9eb530 --- /dev/null +++ b/detail_png/Shaft_02343_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce30bf1ed4de6eebd07aa08ae910f86ae16b2cd1eaba27d1c8715db94b83bb80 +size 32537 diff --git a/detail_png/Shaft_02346_diam.png b/detail_png/Shaft_02346_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..992e0ab8ea85214b9dd34dd34d27314e34c99648 --- /dev/null +++ b/detail_png/Shaft_02346_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25a373df84a2ff7aa20e0843bf98478998764c6379825bb85c5b468caef05b99 +size 27583 diff --git a/detail_png/Shaft_02346_length.png b/detail_png/Shaft_02346_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d35938042dca361c6934aca75b740728ac16c85d --- /dev/null +++ b/detail_png/Shaft_02346_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0832edafb03df2c9e5e7c64a5aeb28d0cd7b43b172f50ad55fd8fe011b7c9bd8 +size 38738 diff --git a/detail_png/Shaft_02346_title.png b/detail_png/Shaft_02346_title.png new file mode 100644 index 0000000000000000000000000000000000000000..49d25848c33c8b7845b473ea7b06eee114169e3e --- /dev/null +++ b/detail_png/Shaft_02346_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab302b6c9de3701ce13e2a8d2ebafa2442911f41c20fe728d933f4905fd50f06 +size 32986 diff --git a/detail_png/Shaft_02348_diam.png b/detail_png/Shaft_02348_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..558b04e4328f9db945f9cf5bea02538152a6ec3b --- /dev/null +++ b/detail_png/Shaft_02348_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dd9efc7cb6b77db0fea331f1b5c3851be752b7e78d3c4103211be2c1a1032e2 +size 34418 diff --git a/detail_png/Shaft_02348_length.png b/detail_png/Shaft_02348_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5855110c390144252bf33f76cecd6984cdd06af8 --- /dev/null +++ b/detail_png/Shaft_02348_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7dd572214a92b46fb6f0657cdff7bd8dfdec2fd88a5f8e9331ea9ab6067ca715 +size 39777 diff --git a/detail_png/Shaft_02348_title.png b/detail_png/Shaft_02348_title.png new file mode 100644 index 0000000000000000000000000000000000000000..77aa8d340dd178f827e10ac6abaa2ef9e326d8f9 --- /dev/null +++ b/detail_png/Shaft_02348_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cbe4ec826bcb4796d80c95097f19e365552ca72df8a39c58259b3f022bc69a9 +size 32783 diff --git a/detail_png/Shaft_02351_diam.png b/detail_png/Shaft_02351_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..df0129e8d0ebe969e8217a5d36cde292bed3779b --- /dev/null +++ b/detail_png/Shaft_02351_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a0f697f188ea5bbd190bb33662b06a44ae0498f81504f0b00098ec2d537984c +size 26151 diff --git a/detail_png/Shaft_02351_length.png b/detail_png/Shaft_02351_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d70ceca49d1cd69a66a83e1228f445603a15df85 --- /dev/null +++ b/detail_png/Shaft_02351_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abf5960f2d828a8cd35dbc3d43ce70f02e03d63f8322f7df8bd10a267ded330b +size 26554 diff --git a/detail_png/Shaft_02351_title.png b/detail_png/Shaft_02351_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f44b10b31a9bfd3ab8012e4641a6d4ff8b543383 --- /dev/null +++ b/detail_png/Shaft_02351_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e57617dfb0bd6ed96ea04a5053bfb5e5ee22606072d82742b5336bd4c5730fb +size 31739 diff --git a/detail_png/Shaft_02359_diam.png b/detail_png/Shaft_02359_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2e1b11fafe68b72b49d12f3512ab4609506836be --- /dev/null +++ b/detail_png/Shaft_02359_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab9fda84f29485ead91a4f07815eefbe9b9b1b6cbd28ee024680589aa0a11355 +size 31031 diff --git a/detail_png/Shaft_02359_length.png b/detail_png/Shaft_02359_length.png new file mode 100644 index 0000000000000000000000000000000000000000..04c8a73570957a4884098df6e15bf09e08cc5f19 --- /dev/null +++ b/detail_png/Shaft_02359_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b06a9d16637a5176e3d36220115abd9b877701a5c97ddba66e8fdfc24d3bb488 +size 30205 diff --git a/detail_png/Shaft_02359_title.png b/detail_png/Shaft_02359_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fcd7b3a6fb3a1c74bc0441889c2556f47574d887 --- /dev/null +++ b/detail_png/Shaft_02359_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a886b8e4603cf3886f0542f74a75159c625bda53db44d36836fc5668bf6b8b69 +size 29831 diff --git a/detail_png/Shaft_02363_diam.png b/detail_png/Shaft_02363_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..911787d1665cc0f5d647dcfb800665cfd10e7784 --- /dev/null +++ b/detail_png/Shaft_02363_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fdbe1ac1ffae956ad4cc7f424487e0a7c8e7cf78f80f07a1a60629b4ddbcf1a +size 25702 diff --git a/detail_png/Shaft_02363_length.png b/detail_png/Shaft_02363_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dfde0430aabf5d0172d685a97c3c6f7876c64fa1 --- /dev/null +++ b/detail_png/Shaft_02363_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69e8160ccaa6835783ef6cc050cdccafef2a80d3efb6c8979a5c2082951cd186 +size 33834 diff --git a/detail_png/Shaft_02363_title.png b/detail_png/Shaft_02363_title.png new file mode 100644 index 0000000000000000000000000000000000000000..800caecd604b1102da6d193f998f6cf9bd2a4f39 --- /dev/null +++ b/detail_png/Shaft_02363_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:413fca82099b7dfbee43c21ac068ce17546a4073e8f4c41ad19b8b5bf511278d +size 33440 diff --git a/detail_png/Shaft_02365_diam.png b/detail_png/Shaft_02365_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d38790da5310307b70822b1760e38b65ad77220d --- /dev/null +++ b/detail_png/Shaft_02365_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d4b67d6cdd941d53e7d192466268b1d599b2dd118384b56be3e194eee882fd1 +size 25226 diff --git a/detail_png/Shaft_02365_length.png b/detail_png/Shaft_02365_length.png new file mode 100644 index 0000000000000000000000000000000000000000..364871aadbefad02ad349709c7be45cf5c92b4d2 --- /dev/null +++ b/detail_png/Shaft_02365_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b135602deed856f35a973fd5291f8f0b83dfa4d83b2c301302d50484164a403 +size 21684 diff --git a/detail_png/Shaft_02365_title.png b/detail_png/Shaft_02365_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51cc04923aa158e33d0a89f847881baa2935712b --- /dev/null +++ b/detail_png/Shaft_02365_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27cbd3aae4aeccaff5f6fddf053b84b60c5da6dc40eaeb4a7cb9593988df3840 +size 24600 diff --git a/detail_png/Shaft_02366_diam.png b/detail_png/Shaft_02366_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aa57734bcff04e16282c1a04bd30f32c035d92c6 --- /dev/null +++ b/detail_png/Shaft_02366_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a53fd8dbbe608b17413e75188ea70fd93f4ed52d0bef58dbc26ea923ff63f53 +size 31686 diff --git a/detail_png/Shaft_02366_length.png b/detail_png/Shaft_02366_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ffdd471449909da36f183db0d40f9627794b74fe --- /dev/null +++ b/detail_png/Shaft_02366_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98ceac817119977682f3a41db54520a7cbdff76b98c6af739b4e8138f5ff44c0 +size 29253 diff --git a/detail_png/Shaft_02366_title.png b/detail_png/Shaft_02366_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b58945d87008fd4d2813262c5c6de6f9b02434f7 --- /dev/null +++ b/detail_png/Shaft_02366_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:228d98c3505a4ac1564e7ca37c0f5b0c265685e5b493149fa47f754c9cc05f03 +size 36385 diff --git a/detail_png/Shaft_02367_diam.png b/detail_png/Shaft_02367_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7663b00a6eceb5b59b0419742656d0ef6838bdbf --- /dev/null +++ b/detail_png/Shaft_02367_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4ccf42bd2c89f3f02e8e33c754fdcff322bbbe0156f596c2faccfe0a4ce94b7 +size 19224 diff --git a/detail_png/Shaft_02367_length.png b/detail_png/Shaft_02367_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4a515a7d66f394fee71904ac416a31f74272de9d --- /dev/null +++ b/detail_png/Shaft_02367_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9f442d39ba903e43a908917ce39835b88ab5fd31318cca89c99c0a87b13901a +size 19272 diff --git a/detail_png/Shaft_02367_title.png b/detail_png/Shaft_02367_title.png new file mode 100644 index 0000000000000000000000000000000000000000..728e28ced66ba1f962e9115833e3c4aac59524d0 --- /dev/null +++ b/detail_png/Shaft_02367_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e001e22c693b37424421fb15439169d99f0ef9fa3594ec08f7bbaa062cc6b2fe +size 35573 diff --git a/detail_png/Shaft_02370_diam.png b/detail_png/Shaft_02370_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6ef8ec9dcc945904386e85458dd6b4c317839660 --- /dev/null +++ b/detail_png/Shaft_02370_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbc7455113994ec65e116e99ed6d8b57206a7e5e15c57c828ffaef53882b3ddd +size 28316 diff --git a/detail_png/Shaft_02370_length.png b/detail_png/Shaft_02370_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d87f8758b41ededc48295f009117d31368068dd1 --- /dev/null +++ b/detail_png/Shaft_02370_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a045d94bbcac2d8fe9ea4c8418113172094238844129b07dcb7095d763b46f11 +size 21652 diff --git a/detail_png/Shaft_02370_title.png b/detail_png/Shaft_02370_title.png new file mode 100644 index 0000000000000000000000000000000000000000..945415e3e7141016363d7e011ae5112a9e76a767 --- /dev/null +++ b/detail_png/Shaft_02370_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56b9cc692c9898006b7046af3a483add47dbb1c0c3ec5d087588b04bef87ed81 +size 20731 diff --git a/detail_png/Shaft_02372_diam.png b/detail_png/Shaft_02372_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a87446810fba5ca5df869a7469883e97c3d1b5b1 --- /dev/null +++ b/detail_png/Shaft_02372_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8dd1870dd481afd1dc22315a394a98b8a08c4042b741539c0789aefc165bcc7 +size 19517 diff --git a/detail_png/Shaft_02372_length.png b/detail_png/Shaft_02372_length.png new file mode 100644 index 0000000000000000000000000000000000000000..83b9a95688fac532a117c7bf859bcbe0342190ce --- /dev/null +++ b/detail_png/Shaft_02372_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76bd5f22a30ca9edbb4ba5e499bdbcf30f8301e27a5d8e2d7f7aceb9529938c4 +size 16665 diff --git a/detail_png/Shaft_02372_title.png b/detail_png/Shaft_02372_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c9c31b675de52f27fa60826aae2696e60f34d5d7 --- /dev/null +++ b/detail_png/Shaft_02372_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1edefe5d7ea43286c29ef52bffbd16dc13642467d1e8877448d1909efeb28fea +size 22067 diff --git a/detail_png/Shaft_02375_diam.png b/detail_png/Shaft_02375_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fed54c610acc16e9f3aff6c76a77b877f9318ee0 --- /dev/null +++ b/detail_png/Shaft_02375_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1843ad05068b5ccdc554af8b892a1630af364be00ca37f601914cf2389491396 +size 27595 diff --git a/detail_png/Shaft_02375_length.png b/detail_png/Shaft_02375_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bb2434c3835bf8b3d440ccf7b65bcde2b44de38d --- /dev/null +++ b/detail_png/Shaft_02375_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:541bde8928cb9256b9c2aff1935a84551c328e3d035a8f450a6f0c26de6c2dd3 +size 26262 diff --git a/detail_png/Shaft_02375_title.png b/detail_png/Shaft_02375_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3ab7dc46d744864bbbf1fe7a17fb6ab262093289 --- /dev/null +++ b/detail_png/Shaft_02375_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f89053957ec58585b825108a94f739702bcc4f83b54f5e9e9d4e0c6545cfd09 +size 28951 diff --git a/detail_png/Shaft_02377_diam.png b/detail_png/Shaft_02377_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c04cd07b06f30b86c09c334f78d422a8e159d89b --- /dev/null +++ b/detail_png/Shaft_02377_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24e5a0f23c5a868103947f91f971b153e0622cfdb5d4f06b74006fcfade1b16a +size 20654 diff --git a/detail_png/Shaft_02377_length.png b/detail_png/Shaft_02377_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6eaf903e72539b363f2a6bc04cffba7770c70753 --- /dev/null +++ b/detail_png/Shaft_02377_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31bac47f8c7c9325eee3f5a0ca20431ff1d423a6fe3606a8b58229c75c0fb712 +size 16074 diff --git a/detail_png/Shaft_02377_title.png b/detail_png/Shaft_02377_title.png new file mode 100644 index 0000000000000000000000000000000000000000..166c2a5d77f61ec695ab29340aec59482e70238f --- /dev/null +++ b/detail_png/Shaft_02377_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd9e1becf41a7928187ba5fa2f8798e55454ab2c3648981e30e6b5c901b334ab +size 22027 diff --git a/detail_png/Shaft_02381_diam.png b/detail_png/Shaft_02381_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..69052582d2b3d65881cdec641155ed334869abab --- /dev/null +++ b/detail_png/Shaft_02381_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac478f723ae160335d5dd4db89a496b8258d567c6d7e19c23930076794e53766 +size 24947 diff --git a/detail_png/Shaft_02381_length.png b/detail_png/Shaft_02381_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f863f625034ac527845ea9d9869f812bf5533c6 --- /dev/null +++ b/detail_png/Shaft_02381_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54a000e43e84e43cbcd5de075bfd82840d8ed83dcc2423071f3f68940fcd1f65 +size 30991 diff --git a/detail_png/Shaft_02381_title.png b/detail_png/Shaft_02381_title.png new file mode 100644 index 0000000000000000000000000000000000000000..32bf38ea814cff43c7586cf20fa216457b2006b9 --- /dev/null +++ b/detail_png/Shaft_02381_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33429f83a40bd8204d6fafd807c5cead87eac17ec14fb2f9ab335b4472351691 +size 32653 diff --git a/detail_png/Shaft_02384_diam.png b/detail_png/Shaft_02384_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2242d2347a2c48dbf4a611fe598b41c6b40c4afa --- /dev/null +++ b/detail_png/Shaft_02384_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72514412f783b14a0670ac61d256513fb09b071a36fbde8448e917fdce2d4460 +size 25761 diff --git a/detail_png/Shaft_02384_length.png b/detail_png/Shaft_02384_length.png new file mode 100644 index 0000000000000000000000000000000000000000..994df5d8dfea77bfe8196901ea7e53775a381fb3 --- /dev/null +++ b/detail_png/Shaft_02384_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5df2beab2e90669c903febbbeee221b882d76c7a29bb1d48a3d4d18fb5d283c +size 21568 diff --git a/detail_png/Shaft_02384_title.png b/detail_png/Shaft_02384_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d790289b1b1a1a89bcf4d489464d82f50428c73b --- /dev/null +++ b/detail_png/Shaft_02384_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0cbdeaed1218e88fbef638ae9ee0cee4a34bdcf44d50621de3b8b0afe6fcdde +size 18607 diff --git a/detail_png/Shaft_02385_diam.png b/detail_png/Shaft_02385_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..64108a7abbb4bcab2cd481e8d0b5d2a79a2885c1 --- /dev/null +++ b/detail_png/Shaft_02385_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d33f5687b3f691964479ddbf05fc888df8502d8ac41349f9ba098f3dd1152b4 +size 25097 diff --git a/detail_png/Shaft_02385_length.png b/detail_png/Shaft_02385_length.png new file mode 100644 index 0000000000000000000000000000000000000000..569e75df62a94b75ae9b9ac949e5b26ddc87720b --- /dev/null +++ b/detail_png/Shaft_02385_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d2f90a358836a1bffa8602486f87d7ab6d4291da59720085ac5547ef817bd8e +size 20994 diff --git a/detail_png/Shaft_02385_title.png b/detail_png/Shaft_02385_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8652cc822b034447885bb295f97fc9903a75d393 --- /dev/null +++ b/detail_png/Shaft_02385_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50873ae486986fcf475cd17531321346d14679fad561983580c17f1f370f0443 +size 19185 diff --git a/detail_png/Shaft_02387_diam.png b/detail_png/Shaft_02387_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..782d2d64629b8c5fd0026a68dde3f520fb201a7b --- /dev/null +++ b/detail_png/Shaft_02387_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff41a7841ce2cea5b14a282728606c59acc0cfd0680a52de888953f410e0086a +size 17864 diff --git a/detail_png/Shaft_02387_length.png b/detail_png/Shaft_02387_length.png new file mode 100644 index 0000000000000000000000000000000000000000..de073af5153dbd71f23dc8446dfe3674876e46ac --- /dev/null +++ b/detail_png/Shaft_02387_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d2702b2c64b7d3c029a09bd469ecc661446d5ffa431262e80199a97e9b3f2c1 +size 15098 diff --git a/detail_png/Shaft_02387_title.png b/detail_png/Shaft_02387_title.png new file mode 100644 index 0000000000000000000000000000000000000000..57a5b787efe6ee52ff07d680b38f310c2f2dfab9 --- /dev/null +++ b/detail_png/Shaft_02387_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed43563fdb5c03a4a966cbcae55a423e28d2137e7b2e93f664eabba7dc44c898 +size 15333 diff --git a/detail_png/Shaft_02390_diam.png b/detail_png/Shaft_02390_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d16d275838dfb4f4e22e9e33886bd8124274dbd4 --- /dev/null +++ b/detail_png/Shaft_02390_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe0deea935c7daef412de52db51a807142a863288e6d694c3bf9470e68cb8073 +size 19831 diff --git a/detail_png/Shaft_02390_length.png b/detail_png/Shaft_02390_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8c15bdcc19d871b712d36d1a5e8efd670af95efa --- /dev/null +++ b/detail_png/Shaft_02390_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6dec633c3d48afa23fa31c451861c7b0684796e5c76c83148dcfe498c9e88d1 +size 25240 diff --git a/detail_png/Shaft_02390_title.png b/detail_png/Shaft_02390_title.png new file mode 100644 index 0000000000000000000000000000000000000000..46d7ac8c0eaa353813463151f4b21ab523082f71 --- /dev/null +++ b/detail_png/Shaft_02390_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea1033fed7137a1853f2b45c376a6cbafbde700fa871ad7f54d29ddc5216f71f +size 33261 diff --git a/detail_png/Shaft_02402_diam.png b/detail_png/Shaft_02402_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..187f84eccd0c44097a45e0240f4b81b9afc501bf --- /dev/null +++ b/detail_png/Shaft_02402_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58954107eb17892316273f726c4a2558e4003c423ce02bd5b1f42bb2026ea121 +size 20409 diff --git a/detail_png/Shaft_02402_length.png b/detail_png/Shaft_02402_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f53c1fb7c18c491d0dc2934ebec06581b409db7 --- /dev/null +++ b/detail_png/Shaft_02402_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9df84c666bf87769000a5e4ecececa431ed9ebf55fb6aa0a6cd5d4eca939068 +size 16148 diff --git a/detail_png/Shaft_02402_title.png b/detail_png/Shaft_02402_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cb8facd97d6926a53af3912decc4ab17cf2dc548 --- /dev/null +++ b/detail_png/Shaft_02402_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b57977bf969acc29709a943ae534048b9fe0600abcbdfdb12cbb50d217d7e2c6 +size 19567 diff --git a/detail_png/Shaft_02404_diam.png b/detail_png/Shaft_02404_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8a899e14017ea9cba2d92639efabc350d6950662 --- /dev/null +++ b/detail_png/Shaft_02404_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cd890e01c5acdf617232d9ff0d6c3251b23ee854915938cee8222ad20e341b1 +size 23677 diff --git a/detail_png/Shaft_02404_length.png b/detail_png/Shaft_02404_length.png new file mode 100644 index 0000000000000000000000000000000000000000..057592e69763b52ab30cfb36969c9a26fb6ef246 --- /dev/null +++ b/detail_png/Shaft_02404_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88e4417a0572d55e6cc3e9ba1ed9295f51a8431498fa55957205221e94e1ed6b +size 24924 diff --git a/detail_png/Shaft_02404_title.png b/detail_png/Shaft_02404_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f9af348bdd07766fc46e4741440e61935d8479a1 --- /dev/null +++ b/detail_png/Shaft_02404_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:764f462b1d67e9c24eb7532499ea62b913dc47a5cbd7a0d77ba2c98d59fd523a +size 29008 diff --git a/detail_png/Shaft_02405_diam.png b/detail_png/Shaft_02405_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4773c2b0122afa0f83724c70b24e83af829b439a --- /dev/null +++ b/detail_png/Shaft_02405_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fdc930f08cedb5ff7f1e9a1bd96af23bbac304e250e2bd5caa80aac537ce6ed6 +size 26812 diff --git a/detail_png/Shaft_02405_length.png b/detail_png/Shaft_02405_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a4c6abc033bfb0302baade38c94c0092be374b4a --- /dev/null +++ b/detail_png/Shaft_02405_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c4b870076832dde43a5b9c1a3ce366e6df04a659cb7c7058fb62fc13584f7bf +size 38128 diff --git a/detail_png/Shaft_02405_title.png b/detail_png/Shaft_02405_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d1b2458330c75bc4f6bbef94dc498b1098b49699 --- /dev/null +++ b/detail_png/Shaft_02405_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7209f85aee96eb582f473463c34c80a6575b193eb7cb917cdd60889d2a6eaf23 +size 32226 diff --git a/detail_png/Shaft_02406_diam.png b/detail_png/Shaft_02406_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7d67e63048e37d618f593ef565b0d45318093c61 --- /dev/null +++ b/detail_png/Shaft_02406_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4964319dc4d7502ed07a6427314d4f58bea522034a4ec7eaa6dcf0cc733d7149 +size 24394 diff --git a/detail_png/Shaft_02406_length.png b/detail_png/Shaft_02406_length.png new file mode 100644 index 0000000000000000000000000000000000000000..66d79b16ef8541e0a1fd4ecb7d1f29c9422ba78e --- /dev/null +++ b/detail_png/Shaft_02406_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cab7c839ba576fef6e67102db189f94add66441e90a7a844cca629be312f6c3 +size 28753 diff --git a/detail_png/Shaft_02406_title.png b/detail_png/Shaft_02406_title.png new file mode 100644 index 0000000000000000000000000000000000000000..750c77a2b7ea78263fb00137327c2b4affc3851d --- /dev/null +++ b/detail_png/Shaft_02406_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31293037e82fe6c8df0a604cbd76b2c57e02595700ba057e287083b7b308630e +size 30043 diff --git a/detail_png/Shaft_02408_diam.png b/detail_png/Shaft_02408_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f4482b9d11101a11350389556decb0493c2dfdd5 --- /dev/null +++ b/detail_png/Shaft_02408_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb1623b580daafc0c3cf995fe98f7140137ae8d197d0a495dfa403f348e17e48 +size 19487 diff --git a/detail_png/Shaft_02408_length.png b/detail_png/Shaft_02408_length.png new file mode 100644 index 0000000000000000000000000000000000000000..86f5c93e93071d14287f5bd9165008e2f3e53557 --- /dev/null +++ b/detail_png/Shaft_02408_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afe8fd73ac6a194d74072e8ac14bba1d47502bb29bd623bf0479060e8c0595ca +size 13917 diff --git a/detail_png/Shaft_02408_title.png b/detail_png/Shaft_02408_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29545e61758f0d8cc7d9509181865683142d3768 --- /dev/null +++ b/detail_png/Shaft_02408_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4383bb005d2dbddc01c1300c426bf13c1bd28c269845e72df6f3daad2f10f46 +size 14425 diff --git a/detail_png/Shaft_02412_diam.png b/detail_png/Shaft_02412_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..90ca6981677c8c60bd2462d0484c7b4d613675a5 --- /dev/null +++ b/detail_png/Shaft_02412_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1b60e906979d6a4a6ab22c1094da4b74e1f68224f36be56b6edd5edf683ca3e +size 34492 diff --git a/detail_png/Shaft_02412_length.png b/detail_png/Shaft_02412_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2dec4fc6efc394b4c5363862cb9838ef17e4860d --- /dev/null +++ b/detail_png/Shaft_02412_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbb79982acbde92258ec0b678f2f4d5b59d78a0b5dd422e8b5ea579b6ec58f2a +size 36991 diff --git a/detail_png/Shaft_02412_title.png b/detail_png/Shaft_02412_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f6c3ed79b16b087adf90e7f7e915e77e6f6cfd52 --- /dev/null +++ b/detail_png/Shaft_02412_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d849dd6ad3f3519c4e99d17eb94f3dab6c41a385d5f9af90bc31fad09bf30809 +size 27949 diff --git a/detail_png/Shaft_02414_diam.png b/detail_png/Shaft_02414_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8083e14e00d49eca624b795ca2bd35a9245c24e8 --- /dev/null +++ b/detail_png/Shaft_02414_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f6fbc7f6cf01d5b462626a5ace1e76256aee0f975859d57f6dd880e759554c5 +size 35629 diff --git a/detail_png/Shaft_02414_length.png b/detail_png/Shaft_02414_length.png new file mode 100644 index 0000000000000000000000000000000000000000..50894c6285efaa1e9a3de59e9d7b9f0a13569b87 --- /dev/null +++ b/detail_png/Shaft_02414_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5c9102f0cf36832572fcd302711e58e06833f063e6a6be828d2afdbe17c5ed2 +size 28443 diff --git a/detail_png/Shaft_02414_title.png b/detail_png/Shaft_02414_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6cc0a39e13f6b0d0505f4bb7420a0a68640da859 --- /dev/null +++ b/detail_png/Shaft_02414_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:854c9a0632506ddac92331a3c6b297aa67a648e2be070034edb69e0c997c13f5 +size 27623 diff --git a/detail_png/Shaft_02421_diam.png b/detail_png/Shaft_02421_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dc9442f53d32fb60bf2a9019e987fee742298b98 --- /dev/null +++ b/detail_png/Shaft_02421_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23c6c8eb1fe05368affd804aef0dbc09a36793614e8dd6477ecc04fcbe1a7af4 +size 19343 diff --git a/detail_png/Shaft_02421_length.png b/detail_png/Shaft_02421_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0fa1de0361e106c66986a82e75e5115b10064043 --- /dev/null +++ b/detail_png/Shaft_02421_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddc2735ab5bf3ac7d3f7fbbc14cb1ae0a53a4ed8eca86312d6a4e358f731bca6 +size 15793 diff --git a/detail_png/Shaft_02421_title.png b/detail_png/Shaft_02421_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e596a41abf33303b3c958bdb8f3895d9945448e1 --- /dev/null +++ b/detail_png/Shaft_02421_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcf83437d16d5953898e7e33dc9333db9150abf84626a5599547c87b64cb99e8 +size 18761 diff --git a/detail_png/Shaft_02424_diam.png b/detail_png/Shaft_02424_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..82fd400fb8f13e0c3cd49448e0a4dc1990e06d38 --- /dev/null +++ b/detail_png/Shaft_02424_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a81b44a3d2fb8ffb1bb63c06d1c613b741aaeb51f2e9f8f4e4ed49a7b6fae38 +size 19926 diff --git a/detail_png/Shaft_02424_length.png b/detail_png/Shaft_02424_length.png new file mode 100644 index 0000000000000000000000000000000000000000..568602dc37a365eae96bce854b8ffde8cb5e52c8 --- /dev/null +++ b/detail_png/Shaft_02424_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d52d243954716578c18d1ebbd48328c29e24ff7c253c80ff3361148444bfbb6 +size 20082 diff --git a/detail_png/Shaft_02424_title.png b/detail_png/Shaft_02424_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5961b4921c1c8049b144a236c8769bba518e27f1 --- /dev/null +++ b/detail_png/Shaft_02424_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96ba2eaf09f913fcbc9dc21631f31acd932b480b717c33421bd0be2577754077 +size 28115 diff --git a/detail_png/Shaft_02426_diam.png b/detail_png/Shaft_02426_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ea0de6ac1b5af615dd9f0be73c5d7776ce2f99f1 --- /dev/null +++ b/detail_png/Shaft_02426_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3feec5b092ffc0a9d8723ddb9ce6f44c71cd51e82646b35df74c5fb4dfa1b328 +size 25748 diff --git a/detail_png/Shaft_02426_length.png b/detail_png/Shaft_02426_length.png new file mode 100644 index 0000000000000000000000000000000000000000..abaa516e5123f513b6d27d491b352202af64f880 --- /dev/null +++ b/detail_png/Shaft_02426_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7eefef9162c9d9b7e8e6cedfe4967c7116d196f1a47810a09b8d29d6ad9aee8 +size 34251 diff --git a/detail_png/Shaft_02426_title.png b/detail_png/Shaft_02426_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bcc8763885c808024dcbba2237627616284882bd --- /dev/null +++ b/detail_png/Shaft_02426_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:208269bbe336d06c8c46c5b645ad025bf076a2688a6ec74af2342f9b8f34cf05 +size 30299 diff --git a/detail_png/Shaft_02427_diam.png b/detail_png/Shaft_02427_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..71659577bb160b455784029110d98167081d7a2a --- /dev/null +++ b/detail_png/Shaft_02427_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9aaeaa41d51bf67e4df3ec5ec746c761afc2229edd0733afc67ff53d02a71a39 +size 34537 diff --git a/detail_png/Shaft_02427_length.png b/detail_png/Shaft_02427_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7bd61a8b99cca412c2763e198ffdfef1017435c7 --- /dev/null +++ b/detail_png/Shaft_02427_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c85129325237d6e9bff63388a913f6de006ca8d87c02bad46b7ca357fea189ed +size 27549 diff --git a/detail_png/Shaft_02427_title.png b/detail_png/Shaft_02427_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2aa57fa155817ea62948b3bd167044a134340cf6 --- /dev/null +++ b/detail_png/Shaft_02427_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:417b6fbc0c2edd7eeeab25b431176b8955acb6d277e95864c966461f5a3d940a +size 18855 diff --git a/detail_png/Shaft_02436_diam.png b/detail_png/Shaft_02436_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4881cf9dfebc87f27d04086bdcd2d7facb60680e --- /dev/null +++ b/detail_png/Shaft_02436_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1f72762c92268b95c2f3573a19641e241ec157f60fa174e92a9d66c3703ccfd +size 19990 diff --git a/detail_png/Shaft_02436_length.png b/detail_png/Shaft_02436_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1d84bbdb523ea79f0de4bd141bd81bc497aea4cc --- /dev/null +++ b/detail_png/Shaft_02436_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f64d0e6d90a2f9347e62a4f8010fcfe64c280a32c11b8f6e536bfe9eccb1a879 +size 15580 diff --git a/detail_png/Shaft_02436_title.png b/detail_png/Shaft_02436_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ba3f0143f6c9037be2016d05ba27bd06b3e4231c --- /dev/null +++ b/detail_png/Shaft_02436_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b835d99e12df198c28006635d213d5cd793e4e20135892ed7e64f88b5ad26d48 +size 22018 diff --git a/detail_png/Shaft_02437_diam.png b/detail_png/Shaft_02437_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8ddfde398cebde7ecaa18d0b4f6116f707682e5 --- /dev/null +++ b/detail_png/Shaft_02437_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f3f546c4f18bcbfb4a6bf67c79e98e0102db7f5eafb2fc1790d407e113aa738 +size 20508 diff --git a/detail_png/Shaft_02437_length.png b/detail_png/Shaft_02437_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3232cf2e23fb203b8af8fe8880d2609a83782553 --- /dev/null +++ b/detail_png/Shaft_02437_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c280f821b634ff50c303d7fa385c15098dde2bdff5d86e8e49e24f9bd06c1084 +size 15938 diff --git a/detail_png/Shaft_02437_title.png b/detail_png/Shaft_02437_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9c539e18e69e38f991f907123b2d42ae289991f2 --- /dev/null +++ b/detail_png/Shaft_02437_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a73382f32d27a2d7f64cc41cc5b4c0b89d1285d378fcfd09939c2b15d2d770b7 +size 15730 diff --git a/detail_png/Shaft_02439_diam.png b/detail_png/Shaft_02439_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d4ae423a31df27f1a4b2f145080f36eaa38ff9bd --- /dev/null +++ b/detail_png/Shaft_02439_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f980b8167e9503ad9f553bf1beddd3d6e1bc60d64142be398b67bdc0af1c296 +size 30806 diff --git a/detail_png/Shaft_02439_length.png b/detail_png/Shaft_02439_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7a1d63c945a4d434f37da3b5d4f87bc712059bc --- /dev/null +++ b/detail_png/Shaft_02439_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e979d884d93e8c71d2f60b6da385ad11a9a01f64edfb4c9731823e75dfda2a0a +size 38495 diff --git a/detail_png/Shaft_02439_title.png b/detail_png/Shaft_02439_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9a3416fad8ad3e587db9c67827bd33bcb9c8b7fc --- /dev/null +++ b/detail_png/Shaft_02439_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19f0db9f523f1630b562f89ddf1d7c6dfd2f0d27398b28fc3320bf05626c69e1 +size 29695 diff --git a/detail_png/Shaft_02440_diam.png b/detail_png/Shaft_02440_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c4dbf7c89d65e0bfed1a3dcd9cf9a5d244939208 --- /dev/null +++ b/detail_png/Shaft_02440_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f8f5f3270e9ec021dbf5e4020d4edc9d30230fffda2755455f86802b9a576fa +size 29491 diff --git a/detail_png/Shaft_02440_length.png b/detail_png/Shaft_02440_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7186308f878f705f7b6f00306fe5e729f86f82c4 --- /dev/null +++ b/detail_png/Shaft_02440_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f2e09f4d56a828be6baa8bd81b3de09bab5769bbf72adda9b4158ae79303bba +size 25624 diff --git a/detail_png/Shaft_02440_title.png b/detail_png/Shaft_02440_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ccdceeec6cb188d38df18bed26cfd0a2cac9fd6f --- /dev/null +++ b/detail_png/Shaft_02440_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47a4ac7447468a4b74edef333e509a102f6c2c1db765de6b3beb81118f4678c1 +size 24288 diff --git a/detail_png/Shaft_02442_diam.png b/detail_png/Shaft_02442_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a57a45956b45c3e735805d35c38d4045860216fd --- /dev/null +++ b/detail_png/Shaft_02442_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:025ea83ab6ec67f6ca4b16aefcff8c125de4618b901e50b57b643892a27c267a +size 24553 diff --git a/detail_png/Shaft_02442_length.png b/detail_png/Shaft_02442_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8ad25393ac3e9095a8ccb2848d833987ee922a9b --- /dev/null +++ b/detail_png/Shaft_02442_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaf636a27ea79fa202331ab1997e5d23667e672da94509ff868e3a45ae15a96c +size 35440 diff --git a/detail_png/Shaft_02442_title.png b/detail_png/Shaft_02442_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fbe7575e476112c9b82d12de28866f4834a03e55 --- /dev/null +++ b/detail_png/Shaft_02442_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8309cfd5757937e6e38f0db99dcc95293d6469ea6b53e14c191ef88a958d94e2 +size 28474 diff --git a/detail_png/Shaft_02447_diam.png b/detail_png/Shaft_02447_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b9738042be58591ff60f041063603bbf4e17e84f --- /dev/null +++ b/detail_png/Shaft_02447_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fbe6c9e2fa59ee388c80c36a1495c0bdf8d8f198f7938baaea79e19c738a5d9 +size 25386 diff --git a/detail_png/Shaft_02447_length.png b/detail_png/Shaft_02447_length.png new file mode 100644 index 0000000000000000000000000000000000000000..feed20a0804197926b674a131cbf30607de91efc --- /dev/null +++ b/detail_png/Shaft_02447_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df687573ef969763f2432c302735c3a336ec51245dd8c37daed1a105878fd386 +size 36167 diff --git a/detail_png/Shaft_02447_title.png b/detail_png/Shaft_02447_title.png new file mode 100644 index 0000000000000000000000000000000000000000..11af2336360bcb55bbd89463d539a411643c4462 --- /dev/null +++ b/detail_png/Shaft_02447_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c52c400b2440f1f5110c0c4ea67a9430bedead3a0e3883a45e574b114993c577 +size 31641 diff --git a/detail_png/Shaft_02448_diam.png b/detail_png/Shaft_02448_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3188e8c1e392186bf98d8260c94de8b8a697e4c5 --- /dev/null +++ b/detail_png/Shaft_02448_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:503f22475ea3f695114892e51fed102bdcc8766d9cfcd0c50ed196f152db4704 +size 25031 diff --git a/detail_png/Shaft_02448_length.png b/detail_png/Shaft_02448_length.png new file mode 100644 index 0000000000000000000000000000000000000000..628016456a6c4d289643019686b7a914cf498784 --- /dev/null +++ b/detail_png/Shaft_02448_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:083fc20b42b4febd73aed39d82bc7f3805f5f0ff1f53b2c22d9bf57820dc0fae +size 35769 diff --git a/detail_png/Shaft_02448_title.png b/detail_png/Shaft_02448_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c641399c716cd18d6c78de359dd2b802ac913dd9 --- /dev/null +++ b/detail_png/Shaft_02448_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e09d3c39e6da3d5f3c493d065a5d8c84ed43cb25f93083227d08f1a3a96d4e4f +size 32147 diff --git a/detail_png/Shaft_02453_diam.png b/detail_png/Shaft_02453_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6624aa590ef4207e9d33e5e2a48882a203a96bfe --- /dev/null +++ b/detail_png/Shaft_02453_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ac9149cb49a0ba9d5780634220072bb3de5dec77c7a190d6d826a5033ed89cc +size 26548 diff --git a/detail_png/Shaft_02453_length.png b/detail_png/Shaft_02453_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1b331e58ff8b950a4a1c3904cc455ba27098932e --- /dev/null +++ b/detail_png/Shaft_02453_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99734e6b73948d7bd464f090251009e9dc4450f22dc6b15b6996a97e19209ba3 +size 24240 diff --git a/detail_png/Shaft_02453_title.png b/detail_png/Shaft_02453_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a6e4bae1f9992f52e70038009167c0cee9679f9 --- /dev/null +++ b/detail_png/Shaft_02453_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7414097db84c71be4682e74554296b116e7d35f256f33b0f825d9fc249646a3d +size 29603 diff --git a/detail_png/Shaft_02457_diam.png b/detail_png/Shaft_02457_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a4bb7d683e65fcd1499d00d5302b11121593271 --- /dev/null +++ b/detail_png/Shaft_02457_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9526035278cc87beb3a1a07935c39daae531a72ac403272ca127d6f704596642 +size 29950 diff --git a/detail_png/Shaft_02457_length.png b/detail_png/Shaft_02457_length.png new file mode 100644 index 0000000000000000000000000000000000000000..04a2ea1c8cf04ea7e602593778a5c58b3686ba90 --- /dev/null +++ b/detail_png/Shaft_02457_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a534dcb08fa670d037cfc4d03bfb8febb5233f857b0b793eedb55008afe484c0 +size 23575 diff --git a/detail_png/Shaft_02457_title.png b/detail_png/Shaft_02457_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6119dc59bb2cd313df4f19559259bda4e623d77b --- /dev/null +++ b/detail_png/Shaft_02457_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c2c10906b6f69776ad03fcee5e80fd1951ef7ef51f4ea675d8772e26b661223 +size 28680 diff --git a/detail_png/Shaft_02460_diam.png b/detail_png/Shaft_02460_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..505ebefac8707e0c4a5be228273e754cfe07e6c4 --- /dev/null +++ b/detail_png/Shaft_02460_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbccba5bbb6cbed00cdcce1ed360447c16425671df6d461273e47516ab60bc9d +size 26086 diff --git a/detail_png/Shaft_02460_length.png b/detail_png/Shaft_02460_length.png new file mode 100644 index 0000000000000000000000000000000000000000..786b11c53b7c451c1a52423dde13ab5c226c113a --- /dev/null +++ b/detail_png/Shaft_02460_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f904d74c434cbe28ee7a27086aef8068ed7800c4b65760055fb8cdfdad478949 +size 25184 diff --git a/detail_png/Shaft_02460_title.png b/detail_png/Shaft_02460_title.png new file mode 100644 index 0000000000000000000000000000000000000000..074eb30e859826085bc5e6053f19c194433785e8 --- /dev/null +++ b/detail_png/Shaft_02460_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38c91e4f2c9e2cb1df4481ae26bee8e7e4ef686a2d26466292e9db1386db06d0 +size 29148 diff --git a/detail_png/Shaft_02468_diam.png b/detail_png/Shaft_02468_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..905e072c624322a224dd0d19ddcc6ff9c67fc0f4 --- /dev/null +++ b/detail_png/Shaft_02468_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df353f1d4d7310be4e8e62237aef2f3d250d24b6c5896c94018f51ee723a2901 +size 18963 diff --git a/detail_png/Shaft_02468_length.png b/detail_png/Shaft_02468_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f41d26cd22c3c408c7664796e70c01b09b3cb1fb --- /dev/null +++ b/detail_png/Shaft_02468_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19faae07b02a57c17549676378cff2cbbf75b83abb623f61e35f380569a01c66 +size 22421 diff --git a/detail_png/Shaft_02468_title.png b/detail_png/Shaft_02468_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c22e01bf64da0c723cf22108a5aefa0d848a889 --- /dev/null +++ b/detail_png/Shaft_02468_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98831c8c8be8b219cc770884056b40205ed7adc4c5e4ab6aebf4cf4b11bd4d92 +size 35905 diff --git a/detail_png/Shaft_02474_diam.png b/detail_png/Shaft_02474_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ad4098efc1d17f94527e5e5653b8f08110b45234 --- /dev/null +++ b/detail_png/Shaft_02474_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c80a95b6adda40b86840d026bc6dbfcbdf6588f9d21cda5dd45963f586e8ca0 +size 23221 diff --git a/detail_png/Shaft_02474_length.png b/detail_png/Shaft_02474_length.png new file mode 100644 index 0000000000000000000000000000000000000000..75d7aecfce1cfb6b83ca3b0792d8859e7bc45b2d --- /dev/null +++ b/detail_png/Shaft_02474_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84861195dd6bb6d114dc4fe8427ee5c82aaa81e28c98244a10b128edee72eea1 +size 19405 diff --git a/detail_png/Shaft_02474_title.png b/detail_png/Shaft_02474_title.png new file mode 100644 index 0000000000000000000000000000000000000000..52956b40d82c87b9d41788bdabfeaee06523be36 --- /dev/null +++ b/detail_png/Shaft_02474_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bff06a1162f990044bbbe4c2c8155c54fb2d5b081334f27bc736cf3d62bf8457 +size 21614 diff --git a/detail_png/Shaft_02475_diam.png b/detail_png/Shaft_02475_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2282163444f5b03a2d2d503a13269687f83d5265 --- /dev/null +++ b/detail_png/Shaft_02475_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4705af92e3bd79bd24434cf29c5e215de9392c3128301b2b83c1bf46b4942af8 +size 19816 diff --git a/detail_png/Shaft_02475_length.png b/detail_png/Shaft_02475_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c8053e5bda99644fb747a9ef2c574c011096e541 --- /dev/null +++ b/detail_png/Shaft_02475_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f1426b3e8252b9992655686d444742555c4d81689fc9a45b39f61c78f102c23 +size 16763 diff --git a/detail_png/Shaft_02475_title.png b/detail_png/Shaft_02475_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0e3921a2179ae4ee568dcc4ef5e31f70f4ba349f --- /dev/null +++ b/detail_png/Shaft_02475_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50d1551c4f0c4aed4fd0665b6f818bb4dc47add0915956935b12ec8838c9932c +size 18765 diff --git a/detail_png/Shaft_02476_diam.png b/detail_png/Shaft_02476_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a25e8d61543a2f5e973f506d346b9a2a58fa2031 --- /dev/null +++ b/detail_png/Shaft_02476_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a87888df2b9add59a068e3bc5ef1f313b3ed4b2b5db165d09955bba8918a3831 +size 30612 diff --git a/detail_png/Shaft_02476_length.png b/detail_png/Shaft_02476_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7c4d329e7567e7b999a06a73f356ba2d02dd0d0e --- /dev/null +++ b/detail_png/Shaft_02476_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa84e6ac32b35c639b1289ff50d9225c2ce1664461f262169127337647472872 +size 36002 diff --git a/detail_png/Shaft_02476_title.png b/detail_png/Shaft_02476_title.png new file mode 100644 index 0000000000000000000000000000000000000000..72bf66e2d811a57df9d308ac0f795b8242aa0561 --- /dev/null +++ b/detail_png/Shaft_02476_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54d9c9b7f2799457b0b4508d5d5aaa8c3a38476e346b295e3a3fda292108a4cd +size 29606 diff --git a/detail_png/Shaft_02477_diam.png b/detail_png/Shaft_02477_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..79fe0aa621983c7527ee0dfe6baede05dc63c794 --- /dev/null +++ b/detail_png/Shaft_02477_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:187442d5f192ed1523426bb6859a7b0662ee39b11e107ea68989ee2649c503fd +size 20171 diff --git a/detail_png/Shaft_02477_length.png b/detail_png/Shaft_02477_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8b86b225986d997cdcc1ad8a27430df0f4c0895b --- /dev/null +++ b/detail_png/Shaft_02477_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0127e4a61872349c635237c8a6304e377b8c0bfa7019f345da464e50e523a1e +size 16072 diff --git a/detail_png/Shaft_02477_title.png b/detail_png/Shaft_02477_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b3785b5c7144744c8e727477594b7775b3d67f04 --- /dev/null +++ b/detail_png/Shaft_02477_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcfc98dd2f4166b57a9ff49486cf8b1e724fe50514f6be367515ed48733a04ca +size 16855 diff --git a/detail_png/Shaft_02478_diam.png b/detail_png/Shaft_02478_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fbac33a934e940880716f9bf65d6c446bdfa6713 --- /dev/null +++ b/detail_png/Shaft_02478_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1425478b1da310d66aaa5c3e4811581a91c10405b7dda845f1219b6591f9cc3d +size 31997 diff --git a/detail_png/Shaft_02478_length.png b/detail_png/Shaft_02478_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7119fbfe0b5807bdb1dee3164fe7e35aaf6f3d71 --- /dev/null +++ b/detail_png/Shaft_02478_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4ec13c10d0f923ebe6e3fba4212d8388201637d7bccc1f231bc5f088f089f50 +size 44962 diff --git a/detail_png/Shaft_02478_title.png b/detail_png/Shaft_02478_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8f1bf160963b7e5052f18c5e4bf78d1376e3ee13 --- /dev/null +++ b/detail_png/Shaft_02478_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4b34c124fa4b3d938bcd03ca99b3d2a9342946600c5c0bff222c5f1ad222b29 +size 29349 diff --git a/detail_png/Shaft_02480_diam.png b/detail_png/Shaft_02480_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94988194042b403a049b756f045db9af8914a464 --- /dev/null +++ b/detail_png/Shaft_02480_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51146aa545eacf70b4312ecd43718cc65b552da43c0cd30a7d95501fc947eccb +size 24069 diff --git a/detail_png/Shaft_02480_length.png b/detail_png/Shaft_02480_length.png new file mode 100644 index 0000000000000000000000000000000000000000..52534d04113821216308e4e421ef998025357869 --- /dev/null +++ b/detail_png/Shaft_02480_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecb3c684b5677ce5a5bc350ae01f100ab4bb24ba3590844cddf5208d3ea1e4e0 +size 24994 diff --git a/detail_png/Shaft_02480_title.png b/detail_png/Shaft_02480_title.png new file mode 100644 index 0000000000000000000000000000000000000000..754e56cf5b041ad4702f55d8313b051786612799 --- /dev/null +++ b/detail_png/Shaft_02480_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:987ae6906c49ae1f078eddcbcc9c5091b0e77d81f33d53e9eda869c011e690c5 +size 35639 diff --git a/detail_png/Shaft_02484_diam.png b/detail_png/Shaft_02484_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a209b48481e1f73277bab8d57d50673b181ddf1f --- /dev/null +++ b/detail_png/Shaft_02484_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b98df801bdfa0c20f1b2296ba75f46539a1675aa82f86167a1f4a61c1d132c8 +size 31917 diff --git a/detail_png/Shaft_02484_length.png b/detail_png/Shaft_02484_length.png new file mode 100644 index 0000000000000000000000000000000000000000..036d1c9353acde30591a5613cb87a3ab9799aca4 --- /dev/null +++ b/detail_png/Shaft_02484_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae9bc29f2573df3c037c64ba2b935ba0f61b1cfc1c78af791bc70e2d4bf67171 +size 42267 diff --git a/detail_png/Shaft_02484_title.png b/detail_png/Shaft_02484_title.png new file mode 100644 index 0000000000000000000000000000000000000000..24731eef4a91a860abf8368f46a3a8823a2ac5b1 --- /dev/null +++ b/detail_png/Shaft_02484_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ef28d0b4e0afa6621f9fbc49779b1fbc69518e1338233774fc55bd4d4392725 +size 32266 diff --git a/detail_png/Shaft_02485_diam.png b/detail_png/Shaft_02485_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b05bb94929e5ece171417c3b3582cb0ecde55705 --- /dev/null +++ b/detail_png/Shaft_02485_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:303271c11fddce5eafdff569650a65abaec3c1cf7ff97d81e32fb52bafcf72ec +size 31786 diff --git a/detail_png/Shaft_02485_length.png b/detail_png/Shaft_02485_length.png new file mode 100644 index 0000000000000000000000000000000000000000..76a11616d2656b4ba933e419451f6249fca89d29 --- /dev/null +++ b/detail_png/Shaft_02485_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:089df7abec817e8c5fffa2497f3b3919bf85767381745093109933ba9aacd6ed +size 32196 diff --git a/detail_png/Shaft_02485_title.png b/detail_png/Shaft_02485_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d9a37e90d22aa65c661193cd140cdd953e05a382 --- /dev/null +++ b/detail_png/Shaft_02485_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48c83d4b343d579b584acb45d5f97efe1ee1accb800c5cb474bcab169a47e7ff +size 32076 diff --git a/detail_png/Shaft_02489_diam.png b/detail_png/Shaft_02489_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2f094237f32cc33eccbca4e67233c826f169205e --- /dev/null +++ b/detail_png/Shaft_02489_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f185e01bb3d24cb6684e55642c8c66dd1a6a4ec07b43bc68ae1294bd307d5380 +size 30448 diff --git a/detail_png/Shaft_02489_length.png b/detail_png/Shaft_02489_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3030ae489fa22023ff85d3e484fd89c9111b4bf3 --- /dev/null +++ b/detail_png/Shaft_02489_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ad65d1ca724e6a9769050a943914e152a8e3c8596847b5c55ab091e3a7472e1 +size 44307 diff --git a/detail_png/Shaft_02489_title.png b/detail_png/Shaft_02489_title.png new file mode 100644 index 0000000000000000000000000000000000000000..48868ea0f20736dab2c27dcd9248ccb9296bcedf --- /dev/null +++ b/detail_png/Shaft_02489_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:961f6131d68719e79d04dfce47d1870ac36cd2681e85266252e45cc7c1a3d3de +size 33880 diff --git a/detail_png/Shaft_02495_diam.png b/detail_png/Shaft_02495_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8eb75e2cc82acc121bebcbe353930bccf5312e1b --- /dev/null +++ b/detail_png/Shaft_02495_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c0f9fe27faa84d40613bb6a49b214dd0ff18adaf379a1bb403185d56010c43a +size 18085 diff --git a/detail_png/Shaft_02495_length.png b/detail_png/Shaft_02495_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a7b8323283075d50b63ef76b8da7f1f906ca12bb --- /dev/null +++ b/detail_png/Shaft_02495_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ef2a2c6562fe884407a09ee2e62b879131e78a829e5c0f5b2c5cf894346ea99 +size 18286 diff --git a/detail_png/Shaft_02495_title.png b/detail_png/Shaft_02495_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e87c06f3ba6dc9540bd5f338ded52dc389412f97 --- /dev/null +++ b/detail_png/Shaft_02495_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1613bdff43c5fa33eb71474201379137f8ddea5a58e014c6fd5a27b414f0d9d3 +size 31938 diff --git a/detail_png/Shaft_02497_diam.png b/detail_png/Shaft_02497_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..845201e50a3fb7b261d60562b6bcbe4bff6ce65d --- /dev/null +++ b/detail_png/Shaft_02497_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08905115d4a2820fa894d786f94d2ada1bcdfbbd3e48c50e0b3f1f51a57d2c79 +size 35997 diff --git a/detail_png/Shaft_02497_length.png b/detail_png/Shaft_02497_length.png new file mode 100644 index 0000000000000000000000000000000000000000..de8784d144a7a93ee695f518d520547ae2681faf --- /dev/null +++ b/detail_png/Shaft_02497_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f9093feeb0baf190946712e87a22ee8cc6875cf6a1f246d6778f2dee58e1081 +size 37331 diff --git a/detail_png/Shaft_02497_title.png b/detail_png/Shaft_02497_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e16d8c8a8d2a7cffc0f9590299ec38d43e978c6a --- /dev/null +++ b/detail_png/Shaft_02497_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9542cf9bc83f95e0224c92fb4ef2ae77747e95207792a19cf183141d0150f533 +size 31810 diff --git a/detail_png/Shaft_02504_diam.png b/detail_png/Shaft_02504_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5bbffd811216c472d64692d4a7f2fc56a9368757 --- /dev/null +++ b/detail_png/Shaft_02504_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a7fc2d8af902c2672aeb0a0e43e49c318b5f683d14b336cadd0c11de944a13e +size 18001 diff --git a/detail_png/Shaft_02504_length.png b/detail_png/Shaft_02504_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e958fc24647478c1565377a644595c23b34b58a4 --- /dev/null +++ b/detail_png/Shaft_02504_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eee007e9e47956e43112c023de171a32c55811f040189fb45e321362be174b02 +size 17899 diff --git a/detail_png/Shaft_02504_title.png b/detail_png/Shaft_02504_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b78728d1f108c17b9db7c9f991723fe52eebc092 --- /dev/null +++ b/detail_png/Shaft_02504_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8c5f6c863913f1dad448a40d33375acd91dfe84ab7b1b7715ef339a244c780c +size 22017 diff --git a/detail_png/Shaft_02509_diam.png b/detail_png/Shaft_02509_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c576472407bec5bbea3c85dfdaed4e146b705215 --- /dev/null +++ b/detail_png/Shaft_02509_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e70af73ec0daad6e4c26efa40d525f289e0ffc33e655ca942383fa8e6f0716b4 +size 36777 diff --git a/detail_png/Shaft_02509_length.png b/detail_png/Shaft_02509_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29382c49241060443571475b4b318b1bd326697c --- /dev/null +++ b/detail_png/Shaft_02509_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66b196ad4332a526da9fe57db58dd221bf589fbe6392522fa95013dc5b0f24ae +size 38852 diff --git a/detail_png/Shaft_02509_title.png b/detail_png/Shaft_02509_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b9cb45e3b290cdd1068f88cc4911f67d6eada769 --- /dev/null +++ b/detail_png/Shaft_02509_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71ac89ecaaaab811c5a8d0b25f639ba226da2b4f3ea1df7d3111c0b361a80c11 +size 32580 diff --git a/detail_png/Shaft_02511_diam.png b/detail_png/Shaft_02511_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0452cd2591325f56b4bc36c82ae9e82aefb12485 --- /dev/null +++ b/detail_png/Shaft_02511_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93a3acd27f175d58f0b343a6c943faa29e0c969d0a47e0dcf73c00888d7dbc0f +size 19850 diff --git a/detail_png/Shaft_02511_length.png b/detail_png/Shaft_02511_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2b049e24e531cc29f971c3bcb431dd47c191bcf2 --- /dev/null +++ b/detail_png/Shaft_02511_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:627950a2068a17c9d400be6680eea80890170a5bc03a82062c21f3d2e6a05cfc +size 19926 diff --git a/detail_png/Shaft_02511_title.png b/detail_png/Shaft_02511_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3307d48571725f271332e4413d8228bfc64609fe --- /dev/null +++ b/detail_png/Shaft_02511_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d81a376ce93b02b71f42bbf95b4efcd348d1809955eb49d840d2efdfcd6c3b6 +size 33986 diff --git a/detail_png/Shaft_02516_diam.png b/detail_png/Shaft_02516_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..72675a9a9208ba9a7af440eebed4c9b9919a8640 --- /dev/null +++ b/detail_png/Shaft_02516_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b25d5a91eb4b1ea85f0d80810001288eb62bcd810ca97c24c5b4af604847b24 +size 35307 diff --git a/detail_png/Shaft_02516_length.png b/detail_png/Shaft_02516_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8c8af8350bf1fafd6b76dfcbeef3fabd2a7bf2f0 --- /dev/null +++ b/detail_png/Shaft_02516_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b8d1a19c450c5921f0d0756e80a7c34ed6076241b73aed85a4a51455b3b1666 +size 47629 diff --git a/detail_png/Shaft_02516_title.png b/detail_png/Shaft_02516_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2110772c7205d98f840f814b181e47f8bd89377 --- /dev/null +++ b/detail_png/Shaft_02516_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c2272fafc9c6a2b305dee4395f7b0f30363610d87992250d2d656294534590c +size 29397 diff --git a/detail_png/Shaft_02523_diam.png b/detail_png/Shaft_02523_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..af14ca382814fdc3d98f60cdc43e5d5ad2457cb7 --- /dev/null +++ b/detail_png/Shaft_02523_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f723bfaf2cd42547aa6b2bbf252704eb3575f4eb555443e1d9face287b19cb4 +size 20208 diff --git a/detail_png/Shaft_02523_length.png b/detail_png/Shaft_02523_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0b08b4e6ccebcdf1323511256ed48688694cc120 --- /dev/null +++ b/detail_png/Shaft_02523_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69a1f5ddf3425f41114735c2a4719942061d00ea440d0561cc838a4200a748fc +size 16859 diff --git a/detail_png/Shaft_02523_title.png b/detail_png/Shaft_02523_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4a37e6b62f0158f2e417cf30d98569560e1d5f7a --- /dev/null +++ b/detail_png/Shaft_02523_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7e454f1238695cf2f14a1f37ba31ed64bc98c050d3bee6e0543099fb1e6ca1d +size 18898 diff --git a/detail_png/Shaft_02525_diam.png b/detail_png/Shaft_02525_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dc7a9a544c7fc8ee7b84c30a4d49cdc43abb3cbf --- /dev/null +++ b/detail_png/Shaft_02525_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2512d1657b51c5622e44f9e52dd8fc87ac4b7c95104e8f6b7af905daa3c757b0 +size 37904 diff --git a/detail_png/Shaft_02525_length.png b/detail_png/Shaft_02525_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4515ee2336f7da2dff2b25bae37801c5859a92a2 --- /dev/null +++ b/detail_png/Shaft_02525_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f3ada8f0deb9386248a94bb55d67362669dcc25dd6994a9dcc4ef9565c1b666 +size 40691 diff --git a/detail_png/Shaft_02525_title.png b/detail_png/Shaft_02525_title.png new file mode 100644 index 0000000000000000000000000000000000000000..553f69b06c37876d34883e85316c01ae64fb546b --- /dev/null +++ b/detail_png/Shaft_02525_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da35ecd0cad14d6137af531b01653ef122348bfc96b686f48da4acecb65ca0cc +size 29503 diff --git a/detail_png/Shaft_02527_diam.png b/detail_png/Shaft_02527_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..afe7693a157d5a2d71249c90d7c5d9db3cd079d2 --- /dev/null +++ b/detail_png/Shaft_02527_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a8ee37bbd1e75014602ce80cb95331223c6823aa30139f3997c214266a68352 +size 27150 diff --git a/detail_png/Shaft_02527_length.png b/detail_png/Shaft_02527_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29a2442a6a7d5ba9e96e9a24eb0cae561a67e3a8 --- /dev/null +++ b/detail_png/Shaft_02527_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48c215b3edbc9f6fff42ba5c9a7b97c5238ba5c774ef23f369e871aa07f228fd +size 21473 diff --git a/detail_png/Shaft_02527_title.png b/detail_png/Shaft_02527_title.png new file mode 100644 index 0000000000000000000000000000000000000000..436560eab8b4f46cb64270c294a8fe6e520a8115 --- /dev/null +++ b/detail_png/Shaft_02527_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d450f5555af7c0a12a40a5b71b064b540240fb2275ac4fa8225eb119ca8c7a63 +size 22197 diff --git a/detail_png/Shaft_02528_diam.png b/detail_png/Shaft_02528_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dc8e99e41eb67e6e18bebb6de1193a266fe232c3 --- /dev/null +++ b/detail_png/Shaft_02528_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:504ce5ba7023fa680026c276ff7e769d09be1eefc40be5adece27d314445509e +size 39434 diff --git a/detail_png/Shaft_02528_length.png b/detail_png/Shaft_02528_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f7ad576707169c4c0b88e4a79052bf1c11ecd60 --- /dev/null +++ b/detail_png/Shaft_02528_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962f7b87c88fff33b9b0e388f33a963f96c60591a9018127080d55ce2b177cef +size 34249 diff --git a/detail_png/Shaft_02528_title.png b/detail_png/Shaft_02528_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0068d326a2cb53497758a32f275c2c0ffab3ee92 --- /dev/null +++ b/detail_png/Shaft_02528_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af768e73c25a1b13085290fb2ee67eba8c80f65fb4ed5d4d026c75dae2c60a68 +size 27249 diff --git a/detail_png/Shaft_02536_diam.png b/detail_png/Shaft_02536_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..33386690263b5e621193712f55119e227e093a90 --- /dev/null +++ b/detail_png/Shaft_02536_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe07d72b73504e6038bc899b5ce1b2262586efce569552515878cca6532334ce +size 25800 diff --git a/detail_png/Shaft_02536_length.png b/detail_png/Shaft_02536_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6e3d95cd134b8209f69b03d4c5bb2601bfb969dc --- /dev/null +++ b/detail_png/Shaft_02536_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be13ccd5df0c36bfa21aa2ceec8d11d7b0f01839e64afc7b61e2dbbfd75c6562 +size 25948 diff --git a/detail_png/Shaft_02536_title.png b/detail_png/Shaft_02536_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3cecf0ee39846c7b90d4914bd4abffdf1de9fdc3 --- /dev/null +++ b/detail_png/Shaft_02536_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa33f1ee1bfaff8d2393c021819345db943138e53795ae4b02b8cbb7542a9c49 +size 30615 diff --git a/detail_png/Shaft_02537_diam.png b/detail_png/Shaft_02537_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b55297b3874b484886872e547f6756e4aede2ec4 --- /dev/null +++ b/detail_png/Shaft_02537_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b31e75a11ac74d6978bb380389b6cef6ef2cfeb3a56ebd66425e51c6f9dbb223 +size 28885 diff --git a/detail_png/Shaft_02537_length.png b/detail_png/Shaft_02537_length.png new file mode 100644 index 0000000000000000000000000000000000000000..86ce78a9ea0e15fe5c602318452c23096ba2aeef --- /dev/null +++ b/detail_png/Shaft_02537_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f680be7241e31fcc0b5f4175364ebb65d81de8b636ecf05cbf6ed139404319a +size 29611 diff --git a/detail_png/Shaft_02537_title.png b/detail_png/Shaft_02537_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d768f806d5f93502438be86bc20f2fa3f6cbb524 --- /dev/null +++ b/detail_png/Shaft_02537_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dd4c2f27ae7ed0572d5d4854dbc8199cacc960035574fab3bda2865d013789c +size 35306 diff --git a/detail_png/Shaft_02540_diam.png b/detail_png/Shaft_02540_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..22716cd17af8205a8d754047b00d4e953bf6739a --- /dev/null +++ b/detail_png/Shaft_02540_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:874be1c8b7d8aa8d1f32015bb2e142b12557d805c9a6753f73880376b45c4d5d +size 18517 diff --git a/detail_png/Shaft_02540_length.png b/detail_png/Shaft_02540_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6f01da7c170eddcf0836fc80732c9a59547c7804 --- /dev/null +++ b/detail_png/Shaft_02540_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19eedea953a04eccb699f0b9d3bb01cf8a2c872b47aeffac11331d5f52f87ae2 +size 17287 diff --git a/detail_png/Shaft_02540_title.png b/detail_png/Shaft_02540_title.png new file mode 100644 index 0000000000000000000000000000000000000000..026712734f69d326e2542f9e89b4bb752dc38a4f --- /dev/null +++ b/detail_png/Shaft_02540_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed75d92adaa684f64da3794bda405c2442864a1872285c03f143209857f48a3c +size 28783 diff --git a/detail_png/Shaft_02543_diam.png b/detail_png/Shaft_02543_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8b566b1fa143fd504d024e8890537281cb8c4854 --- /dev/null +++ b/detail_png/Shaft_02543_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96534532a437f63898986e5dfb3670854057af8ffe4a7a8139fce68e130aaf89 +size 26482 diff --git a/detail_png/Shaft_02543_length.png b/detail_png/Shaft_02543_length.png new file mode 100644 index 0000000000000000000000000000000000000000..19327b60c359604653a5873953f2ecc6cc7be3c6 --- /dev/null +++ b/detail_png/Shaft_02543_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51619be1b8e3fe375605ba6f64376b9bd0ee6cfd4865efd89ed6f3b53c347f7a +size 33250 diff --git a/detail_png/Shaft_02543_title.png b/detail_png/Shaft_02543_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a29f15e6254039d0f1dd338364df4af4127fe382 --- /dev/null +++ b/detail_png/Shaft_02543_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d772256517498ba90a1a143a7add9d35edc9ce4c0279829c666188c1f8f6edb +size 35895 diff --git a/detail_png/Shaft_02545_diam.png b/detail_png/Shaft_02545_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bad73ba72c1b4483487abbc75748b089868e36dc --- /dev/null +++ b/detail_png/Shaft_02545_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b732137ead682d128605786836fab92c53bbae6bf3cef0e700508714a62df15 +size 26011 diff --git a/detail_png/Shaft_02545_length.png b/detail_png/Shaft_02545_length.png new file mode 100644 index 0000000000000000000000000000000000000000..84d2a78087994fb6d4deda8d194c188d41f8c9a9 --- /dev/null +++ b/detail_png/Shaft_02545_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11ace74cec7646ced1b0980165cb15fd539d9f172a1de93b6683c613c6777a31 +size 25220 diff --git a/detail_png/Shaft_02545_title.png b/detail_png/Shaft_02545_title.png new file mode 100644 index 0000000000000000000000000000000000000000..96f3db211ffa19a1487664085ab05400159de9e8 --- /dev/null +++ b/detail_png/Shaft_02545_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c485a761dd440e7ce49452d76d7d2fb5d57966c41c978a55e3c6d68333a95d6c +size 34250 diff --git a/detail_png/Shaft_02547_diam.png b/detail_png/Shaft_02547_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4ae7be718e7b3aa40ce402b7f9c8b3980a209206 --- /dev/null +++ b/detail_png/Shaft_02547_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:114df319a5e865721dd7cab6de406c93e42fd0d6b2c9c70d83765e9d86c2a825 +size 19597 diff --git a/detail_png/Shaft_02547_length.png b/detail_png/Shaft_02547_length.png new file mode 100644 index 0000000000000000000000000000000000000000..87db2b1a003db6a3abca4de8be76440bc8380c0c --- /dev/null +++ b/detail_png/Shaft_02547_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbab9b233c68a855b2f0f181a4065c110e9018418ce67b2481f2465e111e8d11 +size 17358 diff --git a/detail_png/Shaft_02547_title.png b/detail_png/Shaft_02547_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8f30febdb0874202bbc1eb2be4e6bfb0cc0a55d2 --- /dev/null +++ b/detail_png/Shaft_02547_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53af4a37efa771dcee3d9f19c7b38c3cca192944c8de9dcfb1afab061cc26b81 +size 15221 diff --git a/detail_png/Shaft_02549_diam.png b/detail_png/Shaft_02549_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0d73389a5e7d0c30b1819afecfb5e7d4d1f9a003 --- /dev/null +++ b/detail_png/Shaft_02549_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd75141078755302a68434a34b4e408f3fdbb44d5a01907f006aeb169b0165f0 +size 29224 diff --git a/detail_png/Shaft_02549_length.png b/detail_png/Shaft_02549_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b0f1159a7b0528c9f450d4a78303e5e60c783a27 --- /dev/null +++ b/detail_png/Shaft_02549_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:044f8baced6d088df7b8a57f6e121f142bdfbabc351a85ab7cc668871de98562 +size 25777 diff --git a/detail_png/Shaft_02549_title.png b/detail_png/Shaft_02549_title.png new file mode 100644 index 0000000000000000000000000000000000000000..98941b3b8848b0504b6370d2626672dc2fc5c81d --- /dev/null +++ b/detail_png/Shaft_02549_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e20a9bac5e6577ed882c61d3f10dd7863e8fddf03182a6f69e1a43a8844598c9 +size 31114 diff --git a/detail_png/Shaft_02551_diam.png b/detail_png/Shaft_02551_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..358ae4aae3c214bf6d08b860647f1302739e35f3 --- /dev/null +++ b/detail_png/Shaft_02551_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fdecfaa21b7bf4ed8b2897b9863ca8526ee6089d2eee7adde9653a4ad47de6d +size 20508 diff --git a/detail_png/Shaft_02551_length.png b/detail_png/Shaft_02551_length.png new file mode 100644 index 0000000000000000000000000000000000000000..898fafc17d8d1e75514b5da6b735f0a430199f20 --- /dev/null +++ b/detail_png/Shaft_02551_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec46881d10153515ef1a3b38892c87d24d7ebdc9ebf4d84e102f84a03990754c +size 18662 diff --git a/detail_png/Shaft_02551_title.png b/detail_png/Shaft_02551_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3124088cb10f4e1a6c4c34f38c3be45ee19c89a1 --- /dev/null +++ b/detail_png/Shaft_02551_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff2b1f18aa8cbaff69e464bb1e84c94864c1e4e16dcd58067b6804faec5e952d +size 26340 diff --git a/detail_png/Shaft_02553_diam.png b/detail_png/Shaft_02553_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..19fa05c6db03b61005c3e503020e06b97a17a45d --- /dev/null +++ b/detail_png/Shaft_02553_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c977d51277668a93c03ac3aefc0004613ee6499c1ee50e7dd7a3f5a4b8c879e +size 19161 diff --git a/detail_png/Shaft_02553_length.png b/detail_png/Shaft_02553_length.png new file mode 100644 index 0000000000000000000000000000000000000000..edf8416454dc0e695de3520a904a4750cdda5e05 --- /dev/null +++ b/detail_png/Shaft_02553_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac5032ac21194ba0aed419b57ea3f0b3327c3042db982cb93686c96d7e4323cb +size 18170 diff --git a/detail_png/Shaft_02553_title.png b/detail_png/Shaft_02553_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4453ff3ead067f3448a839142060c72f8b8cf8c1 --- /dev/null +++ b/detail_png/Shaft_02553_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a88f7e896c4360eeafb3a621b508da9114da545c3be9c68da391c63880f14b4 +size 27446 diff --git a/detail_png/Shaft_02556_diam.png b/detail_png/Shaft_02556_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..85448c3e049a1585f7bc427b5f69838616afe499 --- /dev/null +++ b/detail_png/Shaft_02556_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e44640810af4b220e707be9643db08eb68f073a470046a58e4c3f72d6471967 +size 24829 diff --git a/detail_png/Shaft_02556_length.png b/detail_png/Shaft_02556_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d36a715331bf6417eefb3966735f8c8f8806645 --- /dev/null +++ b/detail_png/Shaft_02556_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0576b77ba7e43563ca62e46cd160ff46b6cc41516322a8dc2be78ab5bc4ef22 +size 36138 diff --git a/detail_png/Shaft_02556_title.png b/detail_png/Shaft_02556_title.png new file mode 100644 index 0000000000000000000000000000000000000000..27cd7d34f55379d4bf54b4c23f5956bdbafcaa6b --- /dev/null +++ b/detail_png/Shaft_02556_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6a31b26d702d17f1aacf9d98a29d3549d9f04b54b46ee3b889c114366266496 +size 36472 diff --git a/detail_png/Shaft_02560_diam.png b/detail_png/Shaft_02560_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8870d9fd73092166a95e4df35f486e16b4f53fa --- /dev/null +++ b/detail_png/Shaft_02560_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:986328d3bd640360f61cd69f7095cf5ba730ab978ed6448a996f8b050b401539 +size 19420 diff --git a/detail_png/Shaft_02560_length.png b/detail_png/Shaft_02560_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2542c0b62ac24fd92e7c7961dcac62fed82a3966 --- /dev/null +++ b/detail_png/Shaft_02560_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bc15b422150b9c27e461b0795abea5fd8cb11fa790c559ae5e4adb81305811f +size 21933 diff --git a/detail_png/Shaft_02560_title.png b/detail_png/Shaft_02560_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cea4cb4a2c322851996a0ae943814725ce11869e --- /dev/null +++ b/detail_png/Shaft_02560_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f0f85df26548f4c680f85e02f5e7b509dc007ab01b21fb6712e69594a84c0f5 +size 30313 diff --git a/detail_png/Shaft_02563_diam.png b/detail_png/Shaft_02563_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..952cd20457a9708d5f6a2a1192bd68b15b4c8174 --- /dev/null +++ b/detail_png/Shaft_02563_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1e58d805b16967faf7cf3fc8c089964381fa00b2ce0d691fd4a30c91871c025 +size 36602 diff --git a/detail_png/Shaft_02563_length.png b/detail_png/Shaft_02563_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fce884a3a1006cccd076a91018d5db25f9d25f48 --- /dev/null +++ b/detail_png/Shaft_02563_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6ec1ab3059590429d161b972df8868acd8148b49103514b535dd3eee9e20010 +size 43439 diff --git a/detail_png/Shaft_02563_title.png b/detail_png/Shaft_02563_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eabf3a59443a79635cbc2cc61fe757e18afe519e --- /dev/null +++ b/detail_png/Shaft_02563_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39ecc786b80799f2ccced4a2eb38bddde7e68a90d23e1357e4846b901cf0d914 +size 33137 diff --git a/detail_png/Shaft_02565_diam.png b/detail_png/Shaft_02565_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eefbe8430a5d194b7971a932b8e4ed363f0de50c --- /dev/null +++ b/detail_png/Shaft_02565_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07973009f4f2b5233c79c1087913eacfa52e573412798f514aa9924d72530368 +size 33544 diff --git a/detail_png/Shaft_02565_length.png b/detail_png/Shaft_02565_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dde024ca30f181fed457eab3371efe8372c58ae6 --- /dev/null +++ b/detail_png/Shaft_02565_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de9be649bdd9bbde09e98f6da13e638c878ffa0d9f945dada6d0aa81e041c115 +size 29102 diff --git a/detail_png/Shaft_02565_title.png b/detail_png/Shaft_02565_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f785fd3185ad357958cae6b88ba892f64aae0718 --- /dev/null +++ b/detail_png/Shaft_02565_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:442dc6b21db0fb2ec2fb83866a47efb4b43cf11975ffea88df0db2b1edb0679e +size 30803 diff --git a/detail_png/Shaft_02566_diam.png b/detail_png/Shaft_02566_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..43d01c7e2a2620bd55fd096c0ce53b2d739d3b30 --- /dev/null +++ b/detail_png/Shaft_02566_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfaf6b674e10f2708d5e35d2419755c94f4a2ae5a6be52188ad202bfcc1ae921 +size 20513 diff --git a/detail_png/Shaft_02566_length.png b/detail_png/Shaft_02566_length.png new file mode 100644 index 0000000000000000000000000000000000000000..efcc21a5c5971eb5857bc931e1fafb073964ecdf --- /dev/null +++ b/detail_png/Shaft_02566_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78abd556f7d8156ddc883bcd9d62d623bec86961622a440fb29015b00c5b0a52 +size 23840 diff --git a/detail_png/Shaft_02566_title.png b/detail_png/Shaft_02566_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5b14fa1e81a890622fd002bc382c353e3c98ba2f --- /dev/null +++ b/detail_png/Shaft_02566_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a99487b1c82669f85499aab3bc435dc1c16081c42a4b5b05b3270d9705997f6f +size 32623 diff --git a/detail_png/Shaft_02568_diam.png b/detail_png/Shaft_02568_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cf4bae7ab62d4f41a5dc1def936a896193f07d6b --- /dev/null +++ b/detail_png/Shaft_02568_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a1b7656f62f2b06ebded663774fd0eed61b0d44b67d65772954d23b54cfcbf7 +size 23629 diff --git a/detail_png/Shaft_02568_length.png b/detail_png/Shaft_02568_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d0e78e0d8d174b853bcce4328d9994dbf2eb0e06 --- /dev/null +++ b/detail_png/Shaft_02568_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a76e675678ac9dda8a61916ac682e2927e49d30420e92b08d69376697a9a84f4 +size 20753 diff --git a/detail_png/Shaft_02568_title.png b/detail_png/Shaft_02568_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ce0ae41945c21ccef54460742c3df6cb51b2667d --- /dev/null +++ b/detail_png/Shaft_02568_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:730508a54ce9e0495b442db42e38c71af254250a7cdea91a6abab439854ad9be +size 23319 diff --git a/detail_png/Shaft_02573_diam.png b/detail_png/Shaft_02573_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e8be60ff4f7f7a17c3267a37decfaea8a11b30de --- /dev/null +++ b/detail_png/Shaft_02573_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14dbf160cce585c8f5173781086ea81f49566e7054dcde7720ed1845c7d69382 +size 34827 diff --git a/detail_png/Shaft_02573_length.png b/detail_png/Shaft_02573_length.png new file mode 100644 index 0000000000000000000000000000000000000000..76969f688a09c686a29b9647aa4d4f8d6ccd6a60 --- /dev/null +++ b/detail_png/Shaft_02573_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f441d38f1aaf2b9df86f679d3dae93f94aaf042678ffdf4f89a36aebdc5ca53 +size 31221 diff --git a/detail_png/Shaft_02573_title.png b/detail_png/Shaft_02573_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a32df42196e300c2493099dd9b9d36b2cd5d773b --- /dev/null +++ b/detail_png/Shaft_02573_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d52ebf7e6b2e9dc5623dc15725db3e1e71d17123dfd914cec75ef0cc71517a2a +size 31931 diff --git a/detail_png/Shaft_02574_diam.png b/detail_png/Shaft_02574_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7744366a0de4fd1170759f51e4528606083403ad --- /dev/null +++ b/detail_png/Shaft_02574_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:752aa4851a5004af48487e21e5c700edb39c476e315f273f8a0e79f1cbe9eda8 +size 20639 diff --git a/detail_png/Shaft_02574_length.png b/detail_png/Shaft_02574_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dd6100f1b76447b4b8e51eb359f5f11c519708ff --- /dev/null +++ b/detail_png/Shaft_02574_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1aa0bc75320cf8f1c825188412f6f768b52daa88c7eb1d6a23c5e23acd5b55a4 +size 16808 diff --git a/detail_png/Shaft_02574_title.png b/detail_png/Shaft_02574_title.png new file mode 100644 index 0000000000000000000000000000000000000000..731bd3cbe714aa4bbb04ed04ab9e76108f8933af --- /dev/null +++ b/detail_png/Shaft_02574_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f120704ea92e3f9514cbaee8928f77e121ff98ad8891746be108df0fdf46b136 +size 18220 diff --git a/detail_png/Shaft_02577_diam.png b/detail_png/Shaft_02577_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7b108eebf15f7707a0354f0a63764afad51ad290 --- /dev/null +++ b/detail_png/Shaft_02577_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8957ee9173e2d02844685453c997832b9f75a823706941bda37b997f50e6e1c +size 25773 diff --git a/detail_png/Shaft_02577_length.png b/detail_png/Shaft_02577_length.png new file mode 100644 index 0000000000000000000000000000000000000000..016a5f56868e6a84ff8852f20f33e49f6ce652a5 --- /dev/null +++ b/detail_png/Shaft_02577_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db3826add247850e3727404178084dda77a40536d448256dbed64de14e1b0363 +size 31874 diff --git a/detail_png/Shaft_02577_title.png b/detail_png/Shaft_02577_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9253f867bbc0bd9e8f45404c239b37b54e724a33 --- /dev/null +++ b/detail_png/Shaft_02577_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fbe421a95e6a18d0bf1278c87a1a2c6bdf870f2cc56fb25c1220156b1ec0535 +size 31525 diff --git a/detail_png/Shaft_02580_diam.png b/detail_png/Shaft_02580_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9b4d523c06cb8683f0e1429df0e60499ccf1f58e --- /dev/null +++ b/detail_png/Shaft_02580_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5eeb57ad3e013350a61af66913f207ccf33e216b0e409b43906de55167118abe +size 19706 diff --git a/detail_png/Shaft_02580_length.png b/detail_png/Shaft_02580_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7a7d5c5a8cfb917fffa88f4b24b2b4d51df956c5 --- /dev/null +++ b/detail_png/Shaft_02580_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f27f6514a5a965d8aae5c3746f8db75d40e39eea76c2f6186396ea723abce365 +size 18620 diff --git a/detail_png/Shaft_02580_title.png b/detail_png/Shaft_02580_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7f402549e29b1f23f5f03daf89f063b4ed92667e --- /dev/null +++ b/detail_png/Shaft_02580_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b931d724b510c3b02b4acdc233a5a09dfc58df3c7529659b61abb4202b083517 +size 36137 diff --git a/detail_png/Shaft_02583_diam.png b/detail_png/Shaft_02583_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8d12e238e82b08d400f9374fb731b9f6fe1d7dfb --- /dev/null +++ b/detail_png/Shaft_02583_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80d6074e6c6a97d76e54e1299ab2103757670f44fe434d13046b1c1c7143414b +size 19378 diff --git a/detail_png/Shaft_02583_length.png b/detail_png/Shaft_02583_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6b9a79642b9fa47870f8c959caf0d27a7292d128 --- /dev/null +++ b/detail_png/Shaft_02583_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b750af70641b02d071b72151af8bba66c4f4cfe5f489b3c61d134cd714480f1 +size 18409 diff --git a/detail_png/Shaft_02583_title.png b/detail_png/Shaft_02583_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8e2f3264f3f2671b5d6a488c6c352973e7405d73 --- /dev/null +++ b/detail_png/Shaft_02583_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cac6d00a9601fac571078948a3f3fb851afed5fc70074ac053ed5b572384618 +size 20682 diff --git a/detail_png/Shaft_02585_diam.png b/detail_png/Shaft_02585_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a3ac92045e944659d3f9047b311fa275c7a1d114 --- /dev/null +++ b/detail_png/Shaft_02585_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7917a324da6593152c4f2cb0b483a0af530488b2a25bfd370d1d854f94fb09a3 +size 19488 diff --git a/detail_png/Shaft_02585_length.png b/detail_png/Shaft_02585_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7a176a483ce6a93b47966631646117d405dcbf11 --- /dev/null +++ b/detail_png/Shaft_02585_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88f4fa92516bb1a89a02b3c04a10777eb407b485b74b3b9a00605fe7af504729 +size 22140 diff --git a/detail_png/Shaft_02585_title.png b/detail_png/Shaft_02585_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6861ea816b3a8247e93b65c4ebe6964895d13f23 --- /dev/null +++ b/detail_png/Shaft_02585_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a940a41ea7b7fa84388fe3fe87542486638d21b06d3f312ecd9844cfcf18a9bb +size 32930 diff --git a/detail_png/Shaft_02587_diam.png b/detail_png/Shaft_02587_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f405216bb96ad5cb554cb972fd1430926c33ff06 --- /dev/null +++ b/detail_png/Shaft_02587_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9ddd6454cd0444ea5ea0e4a826e461259aa66345a312656747fd48d7535b3c1 +size 32247 diff --git a/detail_png/Shaft_02587_length.png b/detail_png/Shaft_02587_length.png new file mode 100644 index 0000000000000000000000000000000000000000..39a389cc8b5a64c9afa03d5c9fd06a5e4233dd50 --- /dev/null +++ b/detail_png/Shaft_02587_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9457a53f8519109b7b1c046596691cadd2e0c27f2685643b186ce32d3e78f91b +size 26964 diff --git a/detail_png/Shaft_02587_title.png b/detail_png/Shaft_02587_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42d7d991d4437c10c7ac77e46f0ea81bc41b05b0 --- /dev/null +++ b/detail_png/Shaft_02587_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3aeac22ab7fb0466f81c72678363d1faa77aadc3bf8ded1bfae4447b27b206c4 +size 27905 diff --git a/detail_png/Shaft_02592_diam.png b/detail_png/Shaft_02592_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..db8c757b1ed01c519ef7bc194a3a1608212bc1dd --- /dev/null +++ b/detail_png/Shaft_02592_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c38891126334bfb09a5a4fa3532d215781cc0a344e5f8b8b3fa42a5d33683cb +size 27128 diff --git a/detail_png/Shaft_02592_length.png b/detail_png/Shaft_02592_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6878f8e52702e05297239ca0b8f02df7d14eb29a --- /dev/null +++ b/detail_png/Shaft_02592_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc988b178a10246aed00b77db0f794e6c7416511bc62278dce13597970d5876f +size 37073 diff --git a/detail_png/Shaft_02592_title.png b/detail_png/Shaft_02592_title.png new file mode 100644 index 0000000000000000000000000000000000000000..15b6cc939eafbabac56146d0822cd1f4dda10799 --- /dev/null +++ b/detail_png/Shaft_02592_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91cbb8cc2198fc30c6cf2cd79b7c8101e905644fc6e09bd83ff30daec25df912 +size 33180 diff --git a/detail_png/Shaft_02596_diam.png b/detail_png/Shaft_02596_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f4bae557c08bbb22cbe22e47819789d22ae47d54 --- /dev/null +++ b/detail_png/Shaft_02596_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c9e4bc88a29cfb64060f8ede73d4ec8bf8b909f659d7520ac6ab19c7e627cd7 +size 23919 diff --git a/detail_png/Shaft_02596_length.png b/detail_png/Shaft_02596_length.png new file mode 100644 index 0000000000000000000000000000000000000000..26b1e6dc298ed84ed09381286dd6961822784025 --- /dev/null +++ b/detail_png/Shaft_02596_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3ad3bdc014b83ecde9278598569d3785717aca730b8a6a2d8a18a92344c440f +size 23749 diff --git a/detail_png/Shaft_02596_title.png b/detail_png/Shaft_02596_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d084a60ff6d103e809f237faa20829ef5474c8bc --- /dev/null +++ b/detail_png/Shaft_02596_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92dbd842861eb6696d0489b2ac52147230348278e5f26f0049ac5d6d317fe633 +size 28804 diff --git a/detail_png/Shaft_02597_diam.png b/detail_png/Shaft_02597_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8cf97d16a73cd65c67dda24f796ce6e529d9ad60 --- /dev/null +++ b/detail_png/Shaft_02597_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:640d2fc6b54b02f83b665bdbb1a087b84e450224e1d83f244007212c114822e6 +size 19544 diff --git a/detail_png/Shaft_02597_length.png b/detail_png/Shaft_02597_length.png new file mode 100644 index 0000000000000000000000000000000000000000..940a248b81697466f04bc67db21123bed1b820d1 --- /dev/null +++ b/detail_png/Shaft_02597_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0126ac83b5c2e1ed7236974a8651d4307dab70a5bcd9d26d22cb09a94eb137fa +size 20727 diff --git a/detail_png/Shaft_02597_title.png b/detail_png/Shaft_02597_title.png new file mode 100644 index 0000000000000000000000000000000000000000..afc3d2f9b674f4c185089053b2c372160f2c9138 --- /dev/null +++ b/detail_png/Shaft_02597_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9baf8150c1957596c8fd1c2529d9cf7506a3fc3938c320015bbb11e7eeb9e98 +size 30069 diff --git a/detail_png/Shaft_02603_diam.png b/detail_png/Shaft_02603_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..412e22d8d656fc531b8b8f0f3af9be7d21b22bfd --- /dev/null +++ b/detail_png/Shaft_02603_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e7a0432ea709e8c101eeb373ed76f787eb43a014290a8bd42ebd9ef60447c0b +size 30723 diff --git a/detail_png/Shaft_02603_length.png b/detail_png/Shaft_02603_length.png new file mode 100644 index 0000000000000000000000000000000000000000..88db666ab8b45345fba6065697b16d1324fd1543 --- /dev/null +++ b/detail_png/Shaft_02603_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:742fa1408f608c16e61eb048546bb5b953975da93926d77692dcd81fbd1d1e89 +size 27162 diff --git a/detail_png/Shaft_02603_title.png b/detail_png/Shaft_02603_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3e4a96f5dcf6dac440f99945851764ef28efea97 --- /dev/null +++ b/detail_png/Shaft_02603_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e101d803f8b67536234c0301eea0cd2027f7f60a66ffae3068ba7d7389b42319 +size 25784 diff --git a/detail_png/Shaft_02604_diam.png b/detail_png/Shaft_02604_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a95ddf90db0d6074e781da6c15a842314a0cf8fa --- /dev/null +++ b/detail_png/Shaft_02604_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaa957faf990c07013eaf762cdfab9d8e2aa10512a02e3384b9f3e24bf14fe43 +size 23390 diff --git a/detail_png/Shaft_02604_length.png b/detail_png/Shaft_02604_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b5e8916276ae8f2396b966abd7bd4a3a86c6b185 --- /dev/null +++ b/detail_png/Shaft_02604_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b01d0cf4a2d0c6ca11440ee5eab6458d03fc0c35837503c7a688eb6a7c83447f +size 25710 diff --git a/detail_png/Shaft_02604_title.png b/detail_png/Shaft_02604_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bdd338d9eb6f95abce9586f261c34d07144ccbb8 --- /dev/null +++ b/detail_png/Shaft_02604_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba3838a316f1fc7194fb1ac0e88982963ee6ba26079b1b161c75c5046bd91ed6 +size 35331 diff --git a/detail_png/Shaft_02605_diam.png b/detail_png/Shaft_02605_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2dfa95beada825214cc64db3d0ce962fb1fc9abf --- /dev/null +++ b/detail_png/Shaft_02605_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ab2988bd5fda2d4e0dfd5cbd576057db3ed2f2c867e399a28c4dc4ab58c3672 +size 20568 diff --git a/detail_png/Shaft_02605_length.png b/detail_png/Shaft_02605_length.png new file mode 100644 index 0000000000000000000000000000000000000000..db83bedfa45c4117704116c3b6a8417a479bca01 --- /dev/null +++ b/detail_png/Shaft_02605_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5a00a609ceb8b4d746ef776d47f4d10bfb326dc17bab673ad9980ef2ca2e700 +size 14669 diff --git a/detail_png/Shaft_02605_title.png b/detail_png/Shaft_02605_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4f9c852898b7a20506b04b5eac5ad1942b4ec420 --- /dev/null +++ b/detail_png/Shaft_02605_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a23a902c05eebf82486e4ff4c5af059b429eb007edd97e5dfd273da1666c764 +size 16687 diff --git a/detail_png/Shaft_02617_diam.png b/detail_png/Shaft_02617_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b6b5c4f3ee44c6fd26680888838c9c6b9bcb80a2 --- /dev/null +++ b/detail_png/Shaft_02617_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e96e75a5c2aa23783aa7faece32ead6b6df0d24d6825ee6142f52f23adcd3a2f +size 19229 diff --git a/detail_png/Shaft_02617_length.png b/detail_png/Shaft_02617_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1d866eaaf5ddd646f42f52ec4d72ab9d0fe77711 --- /dev/null +++ b/detail_png/Shaft_02617_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:462fe49d53860de73f6444e5f105cfec5d168f026b9697599fd9220f4459fb84 +size 23552 diff --git a/detail_png/Shaft_02617_title.png b/detail_png/Shaft_02617_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5460d71190f623e93c927e2b325d5afff192c0ea --- /dev/null +++ b/detail_png/Shaft_02617_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49aec7718e7694e68e8916d253cfab966df7c619347eefb1b7c20d4670a3502f +size 31622 diff --git a/detail_png/Shaft_02618_diam.png b/detail_png/Shaft_02618_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5832b04e11f3b2d2fdfa680d76a3154d437ba804 --- /dev/null +++ b/detail_png/Shaft_02618_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39e030ac429b2804de1bf2d917a1dc2dd7fe8ecb77dbdaae6e9e7b8406b98efb +size 37575 diff --git a/detail_png/Shaft_02618_length.png b/detail_png/Shaft_02618_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bb58c9198d6280702765a19d2f3d1f5e894db08c --- /dev/null +++ b/detail_png/Shaft_02618_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbd5137bf4d83653a766694a6c9cc105856bc64876ab4d2dc2fd38c2422a81a6 +size 55208 diff --git a/detail_png/Shaft_02618_title.png b/detail_png/Shaft_02618_title.png new file mode 100644 index 0000000000000000000000000000000000000000..06e0d6e1d7587a7322f4712f2b09aad938a7c13e --- /dev/null +++ b/detail_png/Shaft_02618_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70153ae347e467a5083b87a077431b7a2063f78e14c23d15c7e72581d30e2422 +size 30094 diff --git a/detail_png/Shaft_02622_diam.png b/detail_png/Shaft_02622_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ec48040942ad49eb7147289986e4e267b0e7ab85 --- /dev/null +++ b/detail_png/Shaft_02622_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b571d35c1cf80d6f554fee1b0ffd2ffedac3c866284766e50e0886c25659318e +size 31821 diff --git a/detail_png/Shaft_02622_length.png b/detail_png/Shaft_02622_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6505f0fe2e6bbecb3a96616c5ab42ece2fc68fdf --- /dev/null +++ b/detail_png/Shaft_02622_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce94d3ffbf161d57913b2b82e1f2c2e81f6a3f75d6a9471ef75e36f6b0b19cbb +size 38747 diff --git a/detail_png/Shaft_02622_title.png b/detail_png/Shaft_02622_title.png new file mode 100644 index 0000000000000000000000000000000000000000..411703379bfd172b9849b12c6d046f501b051a13 --- /dev/null +++ b/detail_png/Shaft_02622_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e54ac0de18947cddca2df2db3ac9a95c099dd1c4f72296af0de07b8e37060d9b +size 33045 diff --git a/detail_png/Shaft_02629_diam.png b/detail_png/Shaft_02629_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..47fbc9a62806793df57244a439bd7b002e70abfd --- /dev/null +++ b/detail_png/Shaft_02629_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab1c5a91098361b9bd690e895aa980dca24bbd6cef732e426b477a9f0e8239fc +size 28913 diff --git a/detail_png/Shaft_02629_length.png b/detail_png/Shaft_02629_length.png new file mode 100644 index 0000000000000000000000000000000000000000..235e63211a3312186b26a4cd4c0564be884165fb --- /dev/null +++ b/detail_png/Shaft_02629_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f442d72b88bde31f8acd8fbaf1dcd1b39f4d65d05fbd1147e73627a1031b161b +size 23845 diff --git a/detail_png/Shaft_02629_title.png b/detail_png/Shaft_02629_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0578ef2e3d9b4562c784e5df6e750e9d3197b3a2 --- /dev/null +++ b/detail_png/Shaft_02629_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4643beead60fef298c7a7d352cdeb404c04eb286514884861ec1560d5442de1 +size 18699 diff --git a/detail_png/Shaft_02637_diam.png b/detail_png/Shaft_02637_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2d91f0a132263655180f22d9b6835dd1260e936f --- /dev/null +++ b/detail_png/Shaft_02637_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74007a4dbb0ef262297e1fd302545a5714ac44bfa77abbcdeaceb6a395f7441f +size 20771 diff --git a/detail_png/Shaft_02637_length.png b/detail_png/Shaft_02637_length.png new file mode 100644 index 0000000000000000000000000000000000000000..99b8d1c0be30fd30393996414b726dde34427b6a --- /dev/null +++ b/detail_png/Shaft_02637_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d7e183d1091f5e29a932420888e33de1d6ef64b3ec2172a121e69d50884dba3 +size 16591 diff --git a/detail_png/Shaft_02637_title.png b/detail_png/Shaft_02637_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ce8731a0c4a433e67cdac175422132814abdd32 --- /dev/null +++ b/detail_png/Shaft_02637_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3834429f5c46c538dc315d9d501941608d12048adc54bda143b1cb959ba3ac1 +size 16543 diff --git a/detail_png/Shaft_02638_diam.png b/detail_png/Shaft_02638_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c734df04c613473b88ddcd9c00bc45fd5f0de905 --- /dev/null +++ b/detail_png/Shaft_02638_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6381a0a97a72321e5e7bcf39cd2feb106b58f5339dc02f163aea3474650cd98f +size 41533 diff --git a/detail_png/Shaft_02638_length.png b/detail_png/Shaft_02638_length.png new file mode 100644 index 0000000000000000000000000000000000000000..54d284d273603e73076485d1ff0ecdac7fcc2fb2 --- /dev/null +++ b/detail_png/Shaft_02638_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24213be50b7b2b9162f661779a3aa229712516b32a7105c137b434dbc31efb83 +size 57055 diff --git a/detail_png/Shaft_02638_title.png b/detail_png/Shaft_02638_title.png new file mode 100644 index 0000000000000000000000000000000000000000..73ddda0f85aad56a07b348667d544eee1ec9d381 --- /dev/null +++ b/detail_png/Shaft_02638_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5327fe399a51b7588d1f15cf69c420042b08ed25187a02d43b757208280e148a +size 31805 diff --git a/detail_png/Shaft_02639_diam.png b/detail_png/Shaft_02639_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..905c56c78309a7796abc054f66f9c614a8a5ee35 --- /dev/null +++ b/detail_png/Shaft_02639_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb190d9648b50be8a6a44dc58063987b04f42eaafdfd412d2c2550dc7db615bd +size 26100 diff --git a/detail_png/Shaft_02639_length.png b/detail_png/Shaft_02639_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5b0a36f8c234fefdf2e5b28617d2542c1755c6a6 --- /dev/null +++ b/detail_png/Shaft_02639_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea0de95ee143486f9f662bc5fda32796dae632ced19206f82f8898a2b7f9f2de +size 20363 diff --git a/detail_png/Shaft_02639_title.png b/detail_png/Shaft_02639_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c38ca6877a05bfadae141c696e4efb636df193f --- /dev/null +++ b/detail_png/Shaft_02639_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a9d2d558efbb1130e7bc526b0abe8828537aeac838dddb63ac5253204c8f826 +size 25300 diff --git a/detail_png/Shaft_02640_diam.png b/detail_png/Shaft_02640_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da223530cc20b31f1b356df06defa4dbe4f2d389 --- /dev/null +++ b/detail_png/Shaft_02640_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae5eb8d2b5167c0c8139b33f24bca0b21a262ac678bd4180cc5e5e21dd0e417c +size 26215 diff --git a/detail_png/Shaft_02640_length.png b/detail_png/Shaft_02640_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f07cf4183982c8d3f4ce6c19748d1717a80f895d --- /dev/null +++ b/detail_png/Shaft_02640_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eaaec416876d8a68cb142f4c0f87ab8c157fa1b0727a66d3d82b212525158c9a +size 29797 diff --git a/detail_png/Shaft_02640_title.png b/detail_png/Shaft_02640_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a23116a7e5bd5208db0ea164106b7b1af884e47 --- /dev/null +++ b/detail_png/Shaft_02640_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad52d86dd023b7f3b66caccfae93d6f4ccc465de22e1b400aab489409ba1061a +size 30072 diff --git a/detail_png/Shaft_02641_diam.png b/detail_png/Shaft_02641_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a12398025a3ace0ef09c462e8393a6de16d656b8 --- /dev/null +++ b/detail_png/Shaft_02641_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6905434b56c224766a99e4bcf365e74d88b791684a7cc77564b67585abe89dfb +size 33812 diff --git a/detail_png/Shaft_02641_length.png b/detail_png/Shaft_02641_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e436d4b1668cc3e77d577725ad4924dfcae5a5ca --- /dev/null +++ b/detail_png/Shaft_02641_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c8f45859955c298df639936a22628844460332bfbc90d21cc7a558e88bb2214 +size 29291 diff --git a/detail_png/Shaft_02641_title.png b/detail_png/Shaft_02641_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bd37afba64b00180d172458a523aab8e5854feac --- /dev/null +++ b/detail_png/Shaft_02641_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef6f4ccf795d69e38e41b647e78ce01115b622c473203abb8037cc8e807a8658 +size 27493 diff --git a/detail_png/Shaft_02648_diam.png b/detail_png/Shaft_02648_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94f20ab3afac34fb462553b9e03e6e5ae5111b79 --- /dev/null +++ b/detail_png/Shaft_02648_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c750cdd6def4de610a2ecf055a8a04d50091ce47d8b8f7498d8f4bc4e69547d +size 30800 diff --git a/detail_png/Shaft_02648_length.png b/detail_png/Shaft_02648_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b44638c2d490d9d04f5fbcc88547e9870966a6e1 --- /dev/null +++ b/detail_png/Shaft_02648_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c2cffb1ff27823a0f6ede87945b94e9e1ff374799a736e86a90deb98294680f +size 24887 diff --git a/detail_png/Shaft_02648_title.png b/detail_png/Shaft_02648_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4d4d2384ef3d7345c145644020ba3490d2c79836 --- /dev/null +++ b/detail_png/Shaft_02648_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc78bb6db7f4a29b4db39cb2abd3b294d5673cd5bdcedb974f320b895a962f09 +size 25187 diff --git a/detail_png/Shaft_02651_diam.png b/detail_png/Shaft_02651_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a74a19f05661e04fd17a3a542a7dc83890c2f757 --- /dev/null +++ b/detail_png/Shaft_02651_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51ce0047b5141afd6ce2d781826144f39f492685e9e75a0cf445c31e28be3765 +size 40004 diff --git a/detail_png/Shaft_02651_length.png b/detail_png/Shaft_02651_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e49f4b1cbc08af441756963cc47adb2b209b9793 --- /dev/null +++ b/detail_png/Shaft_02651_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a3d3baac317fd048bbaf1c52fcaebdb4fc2d9b17a7ee37bd0e32c0ec7e11440 +size 58991 diff --git a/detail_png/Shaft_02651_title.png b/detail_png/Shaft_02651_title.png new file mode 100644 index 0000000000000000000000000000000000000000..28496925e7f884d32cf71113b93ff616ac985b95 --- /dev/null +++ b/detail_png/Shaft_02651_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7709aa8acda93810ebab2d5371fb42abd395e32bdd970f4c5b7bd716237b0ba +size 30893 diff --git a/detail_png/Shaft_02654_diam.png b/detail_png/Shaft_02654_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2fc93505f348f2f8cb2f3709ebe256a394ef3c6e --- /dev/null +++ b/detail_png/Shaft_02654_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3f5d525903c0a8978d8498495406cdcefcbd0209b20f889f2ed0f14a624f07e +size 20024 diff --git a/detail_png/Shaft_02654_length.png b/detail_png/Shaft_02654_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e7e9896bb8263742ff9894d407fab6b655f7c111 --- /dev/null +++ b/detail_png/Shaft_02654_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb103117293ec63ae27f773998ad1fdfb656d62906a01a65db48432fdad3f694 +size 14850 diff --git a/detail_png/Shaft_02654_title.png b/detail_png/Shaft_02654_title.png new file mode 100644 index 0000000000000000000000000000000000000000..37f0f3ef6341df16a7f6d1a03f354a895fcea0ee --- /dev/null +++ b/detail_png/Shaft_02654_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85938996ba61806d2446743eaab4025d4f0af4c6cebaf988b55cca5680fe8196 +size 22025 diff --git a/detail_png/Shaft_02661_diam.png b/detail_png/Shaft_02661_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2f41e5e74706431a000d2057cd04da6854c32c60 --- /dev/null +++ b/detail_png/Shaft_02661_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c54f6e7002c4b37d0ed77d657c22e15d60e26dcace108ae2031ae93e8b22247c +size 19937 diff --git a/detail_png/Shaft_02661_length.png b/detail_png/Shaft_02661_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d94267515ad24f737b2fefd6d2ad054d91acc53e --- /dev/null +++ b/detail_png/Shaft_02661_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f52d324cc1ad9a56af90b43829308fd3c2f3dbcf5fdb9ba9d36550522ae05b2 +size 18978 diff --git a/detail_png/Shaft_02661_title.png b/detail_png/Shaft_02661_title.png new file mode 100644 index 0000000000000000000000000000000000000000..75b3ac695f3f5fbd903ab6d3518a950082583bfa --- /dev/null +++ b/detail_png/Shaft_02661_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87d205834edfb5bf4bc0f7b8e3c109330880a95f3ce59968ce3f5d9003c273d7 +size 33364 diff --git a/detail_png/Shaft_02665_diam.png b/detail_png/Shaft_02665_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4019c93110a36b2c834313e22afc183d9b2ba772 --- /dev/null +++ b/detail_png/Shaft_02665_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85b9b1af570a213e1a44eefe71212188ebbf4ee5e5109825a9b1ea75714bd67c +size 20418 diff --git a/detail_png/Shaft_02665_length.png b/detail_png/Shaft_02665_length.png new file mode 100644 index 0000000000000000000000000000000000000000..41c60153989b4d303aa26c74b368ad0a25c1d73d --- /dev/null +++ b/detail_png/Shaft_02665_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1308cebd44030b5d4de99954d3c7b143350d8e9d2a3af43b8563956e5ad8936 +size 24952 diff --git a/detail_png/Shaft_02665_title.png b/detail_png/Shaft_02665_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ef5b7591771a35660236e280c24b06a0df1bdfdd --- /dev/null +++ b/detail_png/Shaft_02665_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c68b3c5101da5f39c464abb3b4d8c3510954a2a3c889fb530badaa0969cac8c4 +size 30189 diff --git a/detail_png/Shaft_02666_diam.png b/detail_png/Shaft_02666_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..74305c967dec4b268d9f78f7e9ab07910a7897da --- /dev/null +++ b/detail_png/Shaft_02666_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bc2c185971fefdaa0934835d813b04e81f25e4c3b264758ec9a97cbe2265ff8 +size 37677 diff --git a/detail_png/Shaft_02666_length.png b/detail_png/Shaft_02666_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac8ad51fdc3ce2383e6bbdf633e279a54ba456a3 --- /dev/null +++ b/detail_png/Shaft_02666_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ee28b6c23183f39a92db86bda9a0e29a83ec7a17ee28cf8e1b3ab1d779427f3 +size 54700 diff --git a/detail_png/Shaft_02666_title.png b/detail_png/Shaft_02666_title.png new file mode 100644 index 0000000000000000000000000000000000000000..674e467b19a3591d29e207e0177e482a6a248cbd --- /dev/null +++ b/detail_png/Shaft_02666_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a3043b5b637cfaa228eecce2451a14828ce8b7b1a79fca29ae720a02ed415d6 +size 31468 diff --git a/detail_png/Shaft_02673_diam.png b/detail_png/Shaft_02673_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d487300577339acaaa96a1341cf4bbd50d960268 --- /dev/null +++ b/detail_png/Shaft_02673_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3420ee562ccdc19307672d08b40f629b16562812d2c44214c694da64f3a14963 +size 20003 diff --git a/detail_png/Shaft_02673_length.png b/detail_png/Shaft_02673_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ef6fc5e0c8efe43c8bc00b5e51c0bd4fc0e9705e --- /dev/null +++ b/detail_png/Shaft_02673_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:febbe121499d4c7055d9255e9f73f0fb1c23b9cf3e3c4eb788f0a5da7d487104 +size 15967 diff --git a/detail_png/Shaft_02673_title.png b/detail_png/Shaft_02673_title.png new file mode 100644 index 0000000000000000000000000000000000000000..327e36e0d974f6166fb0e1d01dc24f0f9d3e8bf2 --- /dev/null +++ b/detail_png/Shaft_02673_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfedb4a0645ac410358aafdd9237621fb2bd841dbf1e7d2c61392ad7c1562561 +size 21962 diff --git a/detail_png/Shaft_02676_diam.png b/detail_png/Shaft_02676_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8fcec11082427a6b9077b6a3acf7e8bce7b7a587 --- /dev/null +++ b/detail_png/Shaft_02676_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddefd56d9f317d48cff5456c271ced610ffe95aa5fe9c3e4da737c9ab1e10bed +size 26140 diff --git a/detail_png/Shaft_02676_length.png b/detail_png/Shaft_02676_length.png new file mode 100644 index 0000000000000000000000000000000000000000..164f7e611b0b0ae482e0078f31c5ba9cf6addea8 --- /dev/null +++ b/detail_png/Shaft_02676_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5000d54097cddae94656d33b160cea9532e9f7577a46f7ba5d6d4627099341e4 +size 25944 diff --git a/detail_png/Shaft_02676_title.png b/detail_png/Shaft_02676_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3f3c623c3611a5bdbb4f829d82b606852002d898 --- /dev/null +++ b/detail_png/Shaft_02676_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3f41f5f12d1238a6ace7e8c7ae3dc1c288abeb58397b3b2bd329d3168e14510 +size 27593 diff --git a/detail_png/Shaft_02681_diam.png b/detail_png/Shaft_02681_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d62e3b20a85b3b7056de389f116eed2bdf44d869 --- /dev/null +++ b/detail_png/Shaft_02681_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:168ab74a11288e67c3d4551e637354a310bf8fd1a1a7ed87e3af66de90d2f6e1 +size 37116 diff --git a/detail_png/Shaft_02681_length.png b/detail_png/Shaft_02681_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a3114d97e1635109566fe13f868ae6db928a621 --- /dev/null +++ b/detail_png/Shaft_02681_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6dba390bbe2518925c9398af9efda43f94376d49bc15c687c5ce8f8aa0a89ec +size 49248 diff --git a/detail_png/Shaft_02681_title.png b/detail_png/Shaft_02681_title.png new file mode 100644 index 0000000000000000000000000000000000000000..43994b90922be2891711f012c4ce418ec3f0003a --- /dev/null +++ b/detail_png/Shaft_02681_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a573bdee8c13dc7e7cfe805123e51b4b4c9595d39fbc6f04810cc27796c8f2b +size 32674 diff --git a/detail_png/Shaft_02682_diam.png b/detail_png/Shaft_02682_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c997dbec257200bc62832c7c71b5f04143beeef --- /dev/null +++ b/detail_png/Shaft_02682_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44b94c03909c42b0f71a307956e7cffca92de1a45fa7890dfada17896bc6393c +size 25457 diff --git a/detail_png/Shaft_02682_length.png b/detail_png/Shaft_02682_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8951b7fd3954786729d3ecb9b1c35399ec0e95eb --- /dev/null +++ b/detail_png/Shaft_02682_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3e4b662d732f4915b2fbc2c6a1484c98ecf1960c862545c6647aa5e29b381c0 +size 22875 diff --git a/detail_png/Shaft_02682_title.png b/detail_png/Shaft_02682_title.png new file mode 100644 index 0000000000000000000000000000000000000000..615a7526c0c606dc38bc0a289a4748d4585941af --- /dev/null +++ b/detail_png/Shaft_02682_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a30c5af689c2d3745770a6c37ff429952f044d8e4cf54278299462b667a0b3d +size 24876 diff --git a/detail_png/Shaft_02684_diam.png b/detail_png/Shaft_02684_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da9b407c72eeb876c2a1e0805a52c96e298069dd --- /dev/null +++ b/detail_png/Shaft_02684_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a432bc6e1dc17715825efecede2e67d811f4e005c705f37604c18836a9af0b70 +size 26322 diff --git a/detail_png/Shaft_02684_length.png b/detail_png/Shaft_02684_length.png new file mode 100644 index 0000000000000000000000000000000000000000..00d8fba3f61a08c462497de2ff26a06ed4fe567a --- /dev/null +++ b/detail_png/Shaft_02684_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:573081fcd1caff3d3df47001206cb6056ccaeb2b4035c1890d6b403fbbb8b030 +size 35218 diff --git a/detail_png/Shaft_02684_title.png b/detail_png/Shaft_02684_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dfda2d03a14b956e78b732d60b45e49140d97bbd --- /dev/null +++ b/detail_png/Shaft_02684_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:689b26918bb14fcc82138ce92f87bfa183ef96d563c1ce1cc0d26a6fb2a5aa0e +size 29963 diff --git a/detail_png/Shaft_02687_diam.png b/detail_png/Shaft_02687_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4838b3e0a475216ea2aab80b3c4621e43cbcf5ed --- /dev/null +++ b/detail_png/Shaft_02687_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf268b63444998f722c74d47ff62dd5ef8d95cddd8c60c0e44c7249676200e60 +size 30973 diff --git a/detail_png/Shaft_02687_length.png b/detail_png/Shaft_02687_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac637c7960013b0c3873960751c8ec26be01bf1f --- /dev/null +++ b/detail_png/Shaft_02687_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d79b55c2424fa748023ec28933d2280218134fd38bc7e68a2c5570de1e89a3a4 +size 43057 diff --git a/detail_png/Shaft_02687_title.png b/detail_png/Shaft_02687_title.png new file mode 100644 index 0000000000000000000000000000000000000000..99464546ae30e676988c20cc5254ca8e5fdea04b --- /dev/null +++ b/detail_png/Shaft_02687_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6886ba9e745a8711b557264ecdeb937255fae9ed16c5b96a5fe5566e2af91017 +size 36752 diff --git a/detail_png/Shaft_02689_diam.png b/detail_png/Shaft_02689_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aaa5beb46c3ea9905a7955bae25d7d42dfbe4857 --- /dev/null +++ b/detail_png/Shaft_02689_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83f9cddcc0dbaec28e851ab57ca3f2614ba48d6c08d8b133b2a4e85a88923269 +size 23682 diff --git a/detail_png/Shaft_02689_length.png b/detail_png/Shaft_02689_length.png new file mode 100644 index 0000000000000000000000000000000000000000..16525474ff3f04b39efb5c3d898a3848de809a3d --- /dev/null +++ b/detail_png/Shaft_02689_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75f830de3adea15ac8b050258129d8555f518ec5a6a0e493b10416d752d9cafa +size 23984 diff --git a/detail_png/Shaft_02689_title.png b/detail_png/Shaft_02689_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f5d70367ebda82732bb203acbfc28921d1db8cac --- /dev/null +++ b/detail_png/Shaft_02689_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:519ae433f049bf85b9e8079878b24932e0efc93d45ffe912460b9d2c66ee1588 +size 30965 diff --git a/detail_png/Shaft_02690_diam.png b/detail_png/Shaft_02690_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4153e99b8258023ddc7e5901246f6a9791a420ef --- /dev/null +++ b/detail_png/Shaft_02690_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:134d57538541b80708305568dbed701bbe6c056dad7be25d418d37926fdb9886 +size 37761 diff --git a/detail_png/Shaft_02690_length.png b/detail_png/Shaft_02690_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6ec37379ec29e8ef3766ecb11d6a87a30443a6d0 --- /dev/null +++ b/detail_png/Shaft_02690_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c60a586e3f5ccfdfb01c0d660c21090c117b120f3d9407130a51087ae968561 +size 35992 diff --git a/detail_png/Shaft_02690_title.png b/detail_png/Shaft_02690_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c6acf052e5ae86f10664e3a032d8b31aab87d022 --- /dev/null +++ b/detail_png/Shaft_02690_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaa3773bfe9e118ae9e6725439f3e943501291ff74bc1f36148e83fb28a45b96 +size 32777 diff --git a/detail_png/Shaft_02693_diam.png b/detail_png/Shaft_02693_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..13614fbf671cc5e6d3429fa26073620ff36eb76a --- /dev/null +++ b/detail_png/Shaft_02693_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83a982576643293d4235bd5d4950905940a67c36151693f64fbdf07ddd605d73 +size 19874 diff --git a/detail_png/Shaft_02693_length.png b/detail_png/Shaft_02693_length.png new file mode 100644 index 0000000000000000000000000000000000000000..94a6d0bf36c1a341631a2587a398a4839ddf5e2d --- /dev/null +++ b/detail_png/Shaft_02693_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5db1e004ed49aab2653518c34467e62bbbbfb1bfe25646a4f2220a3b2d5aeb2b +size 19570 diff --git a/detail_png/Shaft_02693_title.png b/detail_png/Shaft_02693_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7b1ad7613d161aa542135c241eca3f7fabf5612a --- /dev/null +++ b/detail_png/Shaft_02693_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f51318a3481063ae048d90b1d7627939ca32b66da040d04b34e43a572a3740c +size 32966 diff --git a/detail_png/Shaft_02699_diam.png b/detail_png/Shaft_02699_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..570eed6db6a9af9b93fa13c8c430c9abe026f53f --- /dev/null +++ b/detail_png/Shaft_02699_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea079e1f127b6dd4a4cfbf04377c5f6863ff303c033c1f1faac59e3d8e165e8a +size 18829 diff --git a/detail_png/Shaft_02699_length.png b/detail_png/Shaft_02699_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c191e80dce09f5f837b4bab0ee73c45814521867 --- /dev/null +++ b/detail_png/Shaft_02699_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c21b00960a646ea4b05dd9a31e00196a1aac8cfca99224b05b65610bae49202 +size 17015 diff --git a/detail_png/Shaft_02699_title.png b/detail_png/Shaft_02699_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bf6420c20fcfe766d0b3ed0d58d4e670189ee192 --- /dev/null +++ b/detail_png/Shaft_02699_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:126fa13ec222e7f3b0e1fb1356d9f3077c393640ce839125bfee778c30e863bf +size 25121 diff --git a/detail_png/Shaft_02700_diam.png b/detail_png/Shaft_02700_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f5019656c1ee36de9809d7b19780fd7c48b5a4f6 --- /dev/null +++ b/detail_png/Shaft_02700_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:123dffa9df06c81115dc43642f7dc6cedf8516547dfeb73631ee9d0828338dbb +size 20668 diff --git a/detail_png/Shaft_02700_length.png b/detail_png/Shaft_02700_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6adea024b5c2817be1510cf69b434e3c678b820c --- /dev/null +++ b/detail_png/Shaft_02700_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4e8c6a2479e31d6f7529b8494b758fa3073da2302aaecae8863bd01fd484153 +size 15648 diff --git a/detail_png/Shaft_02700_title.png b/detail_png/Shaft_02700_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ccdd106a16a34e1eb4c9a6dd88ff63135fe6bbdf --- /dev/null +++ b/detail_png/Shaft_02700_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e4af4bcde82285a7dcd6160326df7ea3e4c8eef36bf40cfafe8c02821ab42ab +size 18526 diff --git a/detail_png/Shaft_02703_diam.png b/detail_png/Shaft_02703_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3a675a4d6f2e9193208209ffcae047eefee38817 --- /dev/null +++ b/detail_png/Shaft_02703_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74fab646acd33f98862fe677f3d7484b367048e2ab551f9d7470754078114cea +size 23295 diff --git a/detail_png/Shaft_02703_length.png b/detail_png/Shaft_02703_length.png new file mode 100644 index 0000000000000000000000000000000000000000..457a7b323eda16f6a77fdcf4a5b3554218aaaadd --- /dev/null +++ b/detail_png/Shaft_02703_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11ba484cec830799c36495f951b0fc2929b6d8b6397d8af3d2bb922eb205b2b3 +size 21036 diff --git a/detail_png/Shaft_02703_title.png b/detail_png/Shaft_02703_title.png new file mode 100644 index 0000000000000000000000000000000000000000..00a3d6fd38659b3aedb66a89bd4e2b5b6233f9dc --- /dev/null +++ b/detail_png/Shaft_02703_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff340dd28a41b133c4309edc94906c383f03fb2aa6dbc5052cfd43b9e64b91f6 +size 15737 diff --git a/detail_png/Shaft_02705_diam.png b/detail_png/Shaft_02705_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c62a393483deeba6a7cb9420267d645a0a201b46 --- /dev/null +++ b/detail_png/Shaft_02705_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3d5a6d95d64587b00415280ab7a1e2c282f22f36845e30b00d6e54712dedbe8 +size 19100 diff --git a/detail_png/Shaft_02705_length.png b/detail_png/Shaft_02705_length.png new file mode 100644 index 0000000000000000000000000000000000000000..234d417186a29312a6d6b4393638bc367518ee3f --- /dev/null +++ b/detail_png/Shaft_02705_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c85f18171f30501a8c77574b7bf2675c2f61a38f8d11f7291bd264071c8761a9 +size 24985 diff --git a/detail_png/Shaft_02705_title.png b/detail_png/Shaft_02705_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31871c5e233339debdd4405da38d03d23ccab92f --- /dev/null +++ b/detail_png/Shaft_02705_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c30885d12efee96baf384cb080b6fed3ab70bcb3fb61ea1a5d784c8101291d7 +size 32032 diff --git a/detail_png/Shaft_02707_diam.png b/detail_png/Shaft_02707_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..41a86470515437353cb0d2f16fa54ebf5035682e --- /dev/null +++ b/detail_png/Shaft_02707_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76071878d14e8e327e37c5c639e26b406ad339dfac9f49724ef3215d42c0db3c +size 25893 diff --git a/detail_png/Shaft_02707_length.png b/detail_png/Shaft_02707_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29dee4dfc4726bc6d0366badd42fb514944374e9 --- /dev/null +++ b/detail_png/Shaft_02707_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db0e1ad26b922d7bea393668f3af6f7a6ea908f1807d43bffc825d26a942a16f +size 25038 diff --git a/detail_png/Shaft_02707_title.png b/detail_png/Shaft_02707_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8e94c44baf982458d854e6a48e4e7e49d91fce19 --- /dev/null +++ b/detail_png/Shaft_02707_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6893279a4b10c0cb6ef622679be64d3c6b649de7dd28084ea96d5583addaf4ea +size 31315 diff --git a/detail_png/Shaft_02710_diam.png b/detail_png/Shaft_02710_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6fdc9b4814fa55e2c6b832495aff474cadb6194a --- /dev/null +++ b/detail_png/Shaft_02710_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2241303a444d27e5456617035cb89a5c576f90a7e6982f2d9426ee07dcd41c9 +size 25793 diff --git a/detail_png/Shaft_02710_length.png b/detail_png/Shaft_02710_length.png new file mode 100644 index 0000000000000000000000000000000000000000..83b9a0bf50f8a43581c3d727fa282d86dc74007d --- /dev/null +++ b/detail_png/Shaft_02710_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4f94f88ea629f66cf1d788a1a8e46d501e285d253c9f4cf46ccdc5fd95ea0f2 +size 21161 diff --git a/detail_png/Shaft_02710_title.png b/detail_png/Shaft_02710_title.png new file mode 100644 index 0000000000000000000000000000000000000000..39191c518c9ba417666a8c0d6051fc2dad4bb0ab --- /dev/null +++ b/detail_png/Shaft_02710_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d0fc547879ba002e53a88a135a58fe11fa415665ebc801033f34cf876b71074 +size 23638 diff --git a/detail_png/Shaft_02720_diam.png b/detail_png/Shaft_02720_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dc03e3199fa4f0382d00535956421ec46895f171 --- /dev/null +++ b/detail_png/Shaft_02720_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aad3a373a2d9f7f2c60fef00b147425b62669d8e290b65dc749be4e70bfbee57 +size 19353 diff --git a/detail_png/Shaft_02720_length.png b/detail_png/Shaft_02720_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ccfd66a3906d0ad578f4e63e98d60c60e9677260 --- /dev/null +++ b/detail_png/Shaft_02720_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:335d497d53ba9e4774ee1138f7961442adf916514073c85a8406687190c174ea +size 20331 diff --git a/detail_png/Shaft_02720_title.png b/detail_png/Shaft_02720_title.png new file mode 100644 index 0000000000000000000000000000000000000000..af3c74225b3655ba24c527791c82b4ee001c2d4e --- /dev/null +++ b/detail_png/Shaft_02720_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f6a918a5974719576f287afa523951367654d7f6df51e505bbcd4bf09b65d47 +size 35050 diff --git a/detail_png/Shaft_02721_diam.png b/detail_png/Shaft_02721_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5b4a22a771e41b09254d2035c78e27e35076dea3 --- /dev/null +++ b/detail_png/Shaft_02721_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6353504c72121a3690848a711d79eb91dd912f4e589942e0446fc32cf0e0de8 +size 25433 diff --git a/detail_png/Shaft_02721_length.png b/detail_png/Shaft_02721_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9c985393d60bd34b881677005dd508b5e179c81f --- /dev/null +++ b/detail_png/Shaft_02721_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2749bbcbd57fdb3a5b95ce1cd2a013f838facbd5e91ea0942d5ee57a9018c3e3 +size 19313 diff --git a/detail_png/Shaft_02721_title.png b/detail_png/Shaft_02721_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8df9e95f6328ca8440765432685497cdf9888721 --- /dev/null +++ b/detail_png/Shaft_02721_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18af43ce53908dde71910669cbdc2cfa4a558c6bf5925ea7536b649304329ce2 +size 22129 diff --git a/detail_png/Shaft_02725_diam.png b/detail_png/Shaft_02725_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..24076c2e378a482a45b41313d8c10ffc8ce84181 --- /dev/null +++ b/detail_png/Shaft_02725_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:874df91caf3ddcd7dd4b5ec608cbbdcd36172aa0c27e59e7c76aa244ff9d7848 +size 19542 diff --git a/detail_png/Shaft_02725_length.png b/detail_png/Shaft_02725_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eb171288ab39f8426c5922ca3251dfcb87fe423c --- /dev/null +++ b/detail_png/Shaft_02725_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a38e7f5f3f11d9c258abf3ca9fed5349cef199458b96ed54596982f43ef9a56 +size 14904 diff --git a/detail_png/Shaft_02725_title.png b/detail_png/Shaft_02725_title.png new file mode 100644 index 0000000000000000000000000000000000000000..046fca60d31dfaabceb2c49419f08ef1523b197f --- /dev/null +++ b/detail_png/Shaft_02725_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d52e65fbc602db7307fc305595d334e40bd116a5f43284bf4e7e16578142f08b +size 16879 diff --git a/detail_png/Shaft_02729_diam.png b/detail_png/Shaft_02729_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..209ee21dd6487402231775408b5cea78e51512d0 --- /dev/null +++ b/detail_png/Shaft_02729_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8372931f012213523b5b326bf67abef0d6bc4b7bc3dbda8d1028a08d95f3a49a +size 29114 diff --git a/detail_png/Shaft_02729_length.png b/detail_png/Shaft_02729_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6ae3fba36f29ee2434cc662b59bb35d3528084f6 --- /dev/null +++ b/detail_png/Shaft_02729_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa9a2384d6ae99bd97824354f9708caea9dd30c7c8df3a724caf64d58b7d088d +size 32985 diff --git a/detail_png/Shaft_02729_title.png b/detail_png/Shaft_02729_title.png new file mode 100644 index 0000000000000000000000000000000000000000..24d6ff340c4dcfb2212bf55e6acc440a4df105d5 --- /dev/null +++ b/detail_png/Shaft_02729_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:752a1d62e5eda2f832c42e1d4384b9b7025a95835c27b4822daf2d82bd028da1 +size 29320 diff --git a/detail_png/Shaft_02731_diam.png b/detail_png/Shaft_02731_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fbb24f07ede252aba6503673006e39993e787ce3 --- /dev/null +++ b/detail_png/Shaft_02731_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c2524943cf7199c1b124ecde10795add033948538abd1198e92437fe02be846 +size 30711 diff --git a/detail_png/Shaft_02731_length.png b/detail_png/Shaft_02731_length.png new file mode 100644 index 0000000000000000000000000000000000000000..786258b2ea762a9527293c47b8224b89e5416d2a --- /dev/null +++ b/detail_png/Shaft_02731_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be2f7e16abc226bf450a82e82a460e7076198f47c9370d6b24cf069ec8b03bb8 +size 42020 diff --git a/detail_png/Shaft_02731_title.png b/detail_png/Shaft_02731_title.png new file mode 100644 index 0000000000000000000000000000000000000000..38a334b867dd68e85bc2281e1879642424b7a27f --- /dev/null +++ b/detail_png/Shaft_02731_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a90adbea619f116cd9e59716cb45978e2f5079a37b0a03a2dded83543bf5990 +size 30034 diff --git a/detail_png/Shaft_02735_diam.png b/detail_png/Shaft_02735_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..932c2de35a812acd5cee80ef38d617a3c5b20ae6 --- /dev/null +++ b/detail_png/Shaft_02735_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9f1b9ba7a3b13a0a41c77cb1a14bb129b23dc5efa34d3f7e05a71b7426b8319 +size 33908 diff --git a/detail_png/Shaft_02735_length.png b/detail_png/Shaft_02735_length.png new file mode 100644 index 0000000000000000000000000000000000000000..24147b4a7ba96b14d083f6076941684bb8d6960b --- /dev/null +++ b/detail_png/Shaft_02735_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d402ed3aa4ac279ee077d92608dffa601e19b1637bb4d250a42f679b8bf08a85 +size 35870 diff --git a/detail_png/Shaft_02735_title.png b/detail_png/Shaft_02735_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7c16ae05a9a2f0d1823da2e98904935bc2fcd1cb --- /dev/null +++ b/detail_png/Shaft_02735_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c77fd00c8becc888d2268a48f716b6829bafa3da6794cdd8fc2d7453541a57fa +size 29376 diff --git a/detail_png/Shaft_02736_diam.png b/detail_png/Shaft_02736_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cce2ff22be700de89fb5c59cd6ea762864bf0cc5 --- /dev/null +++ b/detail_png/Shaft_02736_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cce40cc0e4dad49156093c4bc534a4ef3659704ded417c8d21994c741044a463 +size 24835 diff --git a/detail_png/Shaft_02736_length.png b/detail_png/Shaft_02736_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a345c5c186ee7906692bf7120995625a2869f727 --- /dev/null +++ b/detail_png/Shaft_02736_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65b3d826212adce47ed99259d849070380f590aafee52e7975eaed8baaa9980b +size 35505 diff --git a/detail_png/Shaft_02736_title.png b/detail_png/Shaft_02736_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b6d7782836dbf6ee907b7051297d9d606833d7aa --- /dev/null +++ b/detail_png/Shaft_02736_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bfcb6d776afb4feeb535d7a278c4aa3c74aabfb973a1fdb387b95c8d58614712 +size 30558 diff --git a/detail_png/Shaft_02744_diam.png b/detail_png/Shaft_02744_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..51d8341ba7bee3010d74ef53ec31f9525e47fe41 --- /dev/null +++ b/detail_png/Shaft_02744_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7b24fe4d8eaef7173f905198759bb9209b6a41628a4bf9ceb0d70d6e3ac070c +size 19893 diff --git a/detail_png/Shaft_02744_length.png b/detail_png/Shaft_02744_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1ab9abf2f6fc0cccd472c51a9aeb92b3609a5a27 --- /dev/null +++ b/detail_png/Shaft_02744_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d5d3638961397ace903fa9749a0e02c76265ee41fdc5f39526bff626fde5c7a +size 20580 diff --git a/detail_png/Shaft_02744_title.png b/detail_png/Shaft_02744_title.png new file mode 100644 index 0000000000000000000000000000000000000000..390294a16c3dc4864d11d99349d7feed49e2305e --- /dev/null +++ b/detail_png/Shaft_02744_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:805a71223bc54f939230cfda966ccf05a42fc586e75f07fcb6d03a269f84ef2b +size 30010 diff --git a/detail_png/Shaft_02747_diam.png b/detail_png/Shaft_02747_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a43482898a8615163a529b838df966410250f96d --- /dev/null +++ b/detail_png/Shaft_02747_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:500c988359339b9cdbeb9b63f2dfbd1d027854221c7fba7b2234360d85475f76 +size 20044 diff --git a/detail_png/Shaft_02747_length.png b/detail_png/Shaft_02747_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cffcf3251bfc60531ba765ab02a4b489a43c4a73 --- /dev/null +++ b/detail_png/Shaft_02747_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92941c853817a97cda330fa4d8c547957e26cf2d4d5cd5d7ed6618a40ce4ffa0 +size 16277 diff --git a/detail_png/Shaft_02747_title.png b/detail_png/Shaft_02747_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0223fa51038fd22a46394eca2fe054e38f46bcaa --- /dev/null +++ b/detail_png/Shaft_02747_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22501e0bf5cd245ca675b3f15eefceb30a8f256c07877e176906b2a3cc8ac072 +size 18903 diff --git a/detail_png/Shaft_02748_diam.png b/detail_png/Shaft_02748_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..564c2741b383245a68ce3ec08bf82c49da4d4100 --- /dev/null +++ b/detail_png/Shaft_02748_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e87fd9f6488c2ae4f60585eac069da706b436b182225ebf8fdc4fb71f852eff +size 19740 diff --git a/detail_png/Shaft_02748_length.png b/detail_png/Shaft_02748_length.png new file mode 100644 index 0000000000000000000000000000000000000000..05c96aedb563dd5c13b0a2d64ce987b7cdf19745 --- /dev/null +++ b/detail_png/Shaft_02748_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db053ee8e462f8b851ced810860f2e2b252da85eae9432470456ab99bf49636a +size 19116 diff --git a/detail_png/Shaft_02748_title.png b/detail_png/Shaft_02748_title.png new file mode 100644 index 0000000000000000000000000000000000000000..43c7ba6d19858975d2091d6583e85a0c0b64f0a6 --- /dev/null +++ b/detail_png/Shaft_02748_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b01138db07fbbc6e50d49399e896f1f8783734f59e7b8084782c7f5d5f3a1b4f +size 27714 diff --git a/detail_png/Shaft_02750_diam.png b/detail_png/Shaft_02750_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a2267586664ef7b7c4e8988c0468e3dda42abf92 --- /dev/null +++ b/detail_png/Shaft_02750_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04be4af8075a7eabc973c3d44e1fd482b42b9aacd8030dd04867eeeb6c4ec724 +size 19254 diff --git a/detail_png/Shaft_02750_length.png b/detail_png/Shaft_02750_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fb9a36e085b4dd4f1357f57cc28c8140aa7c95a2 --- /dev/null +++ b/detail_png/Shaft_02750_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6d0561690d3202f71ccd480d4e0c7f4694cc7b87d9f5b80f600056fa70a463d +size 14299 diff --git a/detail_png/Shaft_02750_title.png b/detail_png/Shaft_02750_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29ffb55a5baa1e294393f9102c5e143a5076add6 --- /dev/null +++ b/detail_png/Shaft_02750_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:527e3f69c938eaeff64e0f3d39dbf357be0055826aa2d2897614afd945d81bd9 +size 16401 diff --git a/detail_png/Shaft_02755_diam.png b/detail_png/Shaft_02755_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8b46fefa8d686d609a6d99e8143cde3874c43559 --- /dev/null +++ b/detail_png/Shaft_02755_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d385d5ab49b642f0f79a319dd5e73b59b0c60bc863e4bbfb19b02be372ccc12 +size 19232 diff --git a/detail_png/Shaft_02755_length.png b/detail_png/Shaft_02755_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ce1b5759e347bf014a62d0f5540c43d598845671 --- /dev/null +++ b/detail_png/Shaft_02755_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd6e719867b9a0fa2ed912b8b8d9db484877cc956664571282befb4f9761eb85 +size 20994 diff --git a/detail_png/Shaft_02755_title.png b/detail_png/Shaft_02755_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8c5f10639fa2fe50e05c75827fcc9fb3b863712c --- /dev/null +++ b/detail_png/Shaft_02755_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d5019f1ee374f527a87674e8d7f48bf5f6cfc7483ae913b40fa1484f8f7fc35 +size 31973 diff --git a/detail_png/Shaft_02759_diam.png b/detail_png/Shaft_02759_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..02ec573b2f85cbe95ad18513e423d91fe48899ef --- /dev/null +++ b/detail_png/Shaft_02759_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4843f985ab05f94142442a2bc92efbd476e3335e7d895627b41337f59d5de562 +size 23760 diff --git a/detail_png/Shaft_02759_length.png b/detail_png/Shaft_02759_length.png new file mode 100644 index 0000000000000000000000000000000000000000..32cde91d5af959cced9fa83bce5d0b5eb2c0c2f8 --- /dev/null +++ b/detail_png/Shaft_02759_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87de561b5b58daa551938885a39f966de61e33115a639f2c5c35c7c603a052f6 +size 20763 diff --git a/detail_png/Shaft_02759_title.png b/detail_png/Shaft_02759_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e0a9f2628a565d519e652133526735f9c6489c15 --- /dev/null +++ b/detail_png/Shaft_02759_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e244048bdb0eb3fc7990f65711236aa46b2322371e338a753448aeddf6f597a5 +size 15774 diff --git a/detail_png/Shaft_02761_diam.png b/detail_png/Shaft_02761_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4035b80d8e72bcdc55cb5c3c310c17e38227622d --- /dev/null +++ b/detail_png/Shaft_02761_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d2a510dac6a1bec6aa1e75457aff3bd8f9f0983852397b1805adb7785a6e514 +size 19876 diff --git a/detail_png/Shaft_02761_length.png b/detail_png/Shaft_02761_length.png new file mode 100644 index 0000000000000000000000000000000000000000..57714b465e5077dfda3605651f0a933d5686bd93 --- /dev/null +++ b/detail_png/Shaft_02761_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53939563fc6a718c47791cb82293df54dff625455af6165bad78cf54b1232ba7 +size 16811 diff --git a/detail_png/Shaft_02761_title.png b/detail_png/Shaft_02761_title.png new file mode 100644 index 0000000000000000000000000000000000000000..13f5ee58884f9a8c098f9e73f1e5dc5f66616e89 --- /dev/null +++ b/detail_png/Shaft_02761_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34cd1197f7f8275c78f8a1ee0d6c86682fafa73147ae04e09ac78f9add216eaf +size 15675 diff --git a/detail_png/Shaft_02763_diam.png b/detail_png/Shaft_02763_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b4ca224e2d7d22a9689431ee8a774dc50677860a --- /dev/null +++ b/detail_png/Shaft_02763_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7981c3d61a70fc8cfbcac52b6837312de0d088ccb10bc226d3e67b01142ad580 +size 35902 diff --git a/detail_png/Shaft_02763_length.png b/detail_png/Shaft_02763_length.png new file mode 100644 index 0000000000000000000000000000000000000000..032560d181bf293b6d49fac2916aa32db0dbfd92 --- /dev/null +++ b/detail_png/Shaft_02763_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77ecb947a71b01afc76a2f62c404252c5c21c586d26e3e384a04d0970187ebe5 +size 49566 diff --git a/detail_png/Shaft_02763_title.png b/detail_png/Shaft_02763_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5f91044ca639c340118ce17b2a52d581749e0239 --- /dev/null +++ b/detail_png/Shaft_02763_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45861621aa1a74197836e5a366f1330bcc6acdfdb112cca8463d3f6bebc3c85f +size 33371 diff --git a/detail_png/Shaft_02766_diam.png b/detail_png/Shaft_02766_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ff42747130226324547afbfaeb316482f301ff60 --- /dev/null +++ b/detail_png/Shaft_02766_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59e14663b93603f477a5d5316ef2464ddd6ab76635bdc65cce61ab67d31ddbdc +size 32252 diff --git a/detail_png/Shaft_02766_length.png b/detail_png/Shaft_02766_length.png new file mode 100644 index 0000000000000000000000000000000000000000..01f0ad878345dcb999e0e11bbed952e09e243c5a --- /dev/null +++ b/detail_png/Shaft_02766_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89262c73c164c422ca730f0c5cf42aabf90d431af0aa45f0d3da1bed496633a0 +size 42768 diff --git a/detail_png/Shaft_02766_title.png b/detail_png/Shaft_02766_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b30be800afe010e46fd72056f997b186051fe072 --- /dev/null +++ b/detail_png/Shaft_02766_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7098e9ad363bfc8aed158bd3233d1abf64f7984be9796678ed31149626f0ecd6 +size 32839 diff --git a/detail_png/Shaft_02773_diam.png b/detail_png/Shaft_02773_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..30430e4807b53e11c2d7ace5f240097c5fc968e0 --- /dev/null +++ b/detail_png/Shaft_02773_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f9ffebaf48c7626b23b6e2de21c4c40433d9e79a61b6286c574714de21da5e3 +size 24096 diff --git a/detail_png/Shaft_02773_length.png b/detail_png/Shaft_02773_length.png new file mode 100644 index 0000000000000000000000000000000000000000..abb98eb58f4e8822446a492beb15a8412b69941d --- /dev/null +++ b/detail_png/Shaft_02773_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92cf396647ff6bddfed827bd48cc525a93f2b610b57349a0fe663a6c5972ef63 +size 19234 diff --git a/detail_png/Shaft_02773_title.png b/detail_png/Shaft_02773_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c36fcc7870ebac37cdb9b8d0f874e20b91431ad6 --- /dev/null +++ b/detail_png/Shaft_02773_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8e36084a0d954b34d91f7965e631bbb5cc5efcac237b7a3562f90a2aed9f05e +size 18688 diff --git a/detail_png/Shaft_02774_diam.png b/detail_png/Shaft_02774_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..77bae125084dd6b9d48086037bfba538d8ca366f --- /dev/null +++ b/detail_png/Shaft_02774_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:472857fed002023f793d3a266fdbc635b815b4dfb37f658e1839f25394a178e2 +size 18481 diff --git a/detail_png/Shaft_02774_length.png b/detail_png/Shaft_02774_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1cc6b3601418dad1bfc3dc02675e62d4051af3ac --- /dev/null +++ b/detail_png/Shaft_02774_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fee837d79ec757eba02ee2bc7055d80cd3357377f8589600c27dae902988877 +size 14197 diff --git a/detail_png/Shaft_02774_title.png b/detail_png/Shaft_02774_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6db56c4ab5893f4540d9165d4c490ce723598db3 --- /dev/null +++ b/detail_png/Shaft_02774_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1138e58ce1d681b745941e3f55a19b24baf8428a923f489894ec7832b3e1cc7 +size 17718 diff --git a/detail_png/Shaft_02775_diam.png b/detail_png/Shaft_02775_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f5bd3dda4cccf6364db7c68ba301ca6fd16c98f2 --- /dev/null +++ b/detail_png/Shaft_02775_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea6269001e3021df7b7afebff0cb52fd60950623d5e00359d4804b7a8bb7cdaf +size 29565 diff --git a/detail_png/Shaft_02775_length.png b/detail_png/Shaft_02775_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9e734ac56c6e825a8bca3829ce507e3d180edc5d --- /dev/null +++ b/detail_png/Shaft_02775_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7dd8d1680ad62712a600643d7c559d9859f791e005bf5162cc60b3835d244eb3 +size 29587 diff --git a/detail_png/Shaft_02775_title.png b/detail_png/Shaft_02775_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b05ac0263c6d0ec7539c36e4c20a0ef42fc8eae3 --- /dev/null +++ b/detail_png/Shaft_02775_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a483f3ea55f96a82084a9a9385f6f50d583debd52ca645586b0c0fa7ce28041f +size 31176 diff --git a/detail_png/Shaft_02777_diam.png b/detail_png/Shaft_02777_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e86e6b9c1c5925caddda3bad51328c8556335ac3 --- /dev/null +++ b/detail_png/Shaft_02777_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:440a0bb9ac6d277d0e96ab692b4684367464f7eebaad4ee1c2042d166bfb807e +size 19669 diff --git a/detail_png/Shaft_02777_length.png b/detail_png/Shaft_02777_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6abc2a6c6542893d0ce689b74a08c8b54de427b1 --- /dev/null +++ b/detail_png/Shaft_02777_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f4cd7bb92004adf24b546577dacddcc5534e95cff83001fe055d23572ead0cd +size 15130 diff --git a/detail_png/Shaft_02777_title.png b/detail_png/Shaft_02777_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f567dc856e8cd44506b8f8fd1c6bc8b61d44f55f --- /dev/null +++ b/detail_png/Shaft_02777_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd78caa1e6c61cda319397392ec52e6574420568ad415dc2513be912e8e7727e +size 18870 diff --git a/detail_png/Shaft_02781_diam.png b/detail_png/Shaft_02781_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a7140201b5fd4b6fb5bdc6bd7386cd8c54b4e186 --- /dev/null +++ b/detail_png/Shaft_02781_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77d8bf787b16f0ee6a88e415c9a4adf52a5d2ae56521a6e10f79cf97490a1625 +size 26513 diff --git a/detail_png/Shaft_02781_length.png b/detail_png/Shaft_02781_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c4ad7e8599c14b8a94e0a4118cc8ebd68452447a --- /dev/null +++ b/detail_png/Shaft_02781_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96188bc606dfc7a00f6b259ada4e0d6b863aa62baa45670f2e4e487ee4e3862a +size 19553 diff --git a/detail_png/Shaft_02781_title.png b/detail_png/Shaft_02781_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f0c369e3491abed5785272401d24f6b0364dafe1 --- /dev/null +++ b/detail_png/Shaft_02781_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:788304f2027cd719dcae4455ffcb7372b0fb3da6f4d6aef89660ab4047ce6902 +size 20296 diff --git a/detail_png/Shaft_02782_diam.png b/detail_png/Shaft_02782_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..80a636bdf55f10e15978e32bdab6d838fd05e252 --- /dev/null +++ b/detail_png/Shaft_02782_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d24d7ba04a5a7c8e10a03affc650085a6ab3d8cbce581f9ab12a1f1597e85000 +size 31008 diff --git a/detail_png/Shaft_02782_length.png b/detail_png/Shaft_02782_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4abe48457cb891568b66aa217c0d4c55b124752b --- /dev/null +++ b/detail_png/Shaft_02782_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aebcdbf4ea5afd7fb62fff79c537a8d9915245774cd2291f456ff74573c65cbf +size 30513 diff --git a/detail_png/Shaft_02782_title.png b/detail_png/Shaft_02782_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cbf40e2072a0453523522fe1b3fd6fc3bdc7528f --- /dev/null +++ b/detail_png/Shaft_02782_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3503fd5314f41fd932554c63c760854ec121254c1b3a09aab2807a1c95397840 +size 32157 diff --git a/detail_png/Shaft_02788_diam.png b/detail_png/Shaft_02788_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d9c9d38402d80d620d949639aa10746efa0a6998 --- /dev/null +++ b/detail_png/Shaft_02788_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0468f3615a9a7678f6de3952e2e81e4dcabcae27a93000b7c7111a62c950007b +size 18355 diff --git a/detail_png/Shaft_02788_length.png b/detail_png/Shaft_02788_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ccddbe3c6ba3c6f382f23b14fb1b817d9e3c4c03 --- /dev/null +++ b/detail_png/Shaft_02788_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8998cd7ee0f7be291bfc29da591f13d0e24ba8bcc30d8f73fe880422682e9422 +size 17220 diff --git a/detail_png/Shaft_02788_title.png b/detail_png/Shaft_02788_title.png new file mode 100644 index 0000000000000000000000000000000000000000..16f06f4a6417f19ac98801815a690e67c17d24fe --- /dev/null +++ b/detail_png/Shaft_02788_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51333515724135c903009e88fad2b05fb0ad29e981beed730383d65fdd804712 +size 31462 diff --git a/detail_png/Shaft_02789_diam.png b/detail_png/Shaft_02789_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f0261ea15f4a62d9aa588256af07f7f9dea88f74 --- /dev/null +++ b/detail_png/Shaft_02789_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25adbe7ab175f3ff3bee57ad9db5a831e334abe33cfd928f1c173e27c47bef24 +size 20159 diff --git a/detail_png/Shaft_02789_length.png b/detail_png/Shaft_02789_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13b441c322f34c818b91ec8b06334cdeaed33534 --- /dev/null +++ b/detail_png/Shaft_02789_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ee1027f7862e71fc89851f5224c7052ae3521c7c9051808c595a45bc40fb818 +size 18891 diff --git a/detail_png/Shaft_02789_title.png b/detail_png/Shaft_02789_title.png new file mode 100644 index 0000000000000000000000000000000000000000..60b1a2de5b0590d2fa1201ffeedf6b7404680cfa --- /dev/null +++ b/detail_png/Shaft_02789_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4919a3c4ff78af88f4ac11f7569d5ef9f847005e1a330f85010b520118d668ec +size 28599 diff --git a/detail_png/Shaft_02790_diam.png b/detail_png/Shaft_02790_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4494b7bf0192d50e4903e7cf0861bea810a57f3b --- /dev/null +++ b/detail_png/Shaft_02790_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cfebb55147e151a0f004f77e83bbb7f1d60ac44787d1eb226f7bf90b1e89a1d +size 19232 diff --git a/detail_png/Shaft_02790_length.png b/detail_png/Shaft_02790_length.png new file mode 100644 index 0000000000000000000000000000000000000000..785c2cf810af24684907bbce5c493c119f6d589c --- /dev/null +++ b/detail_png/Shaft_02790_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:986381426ee1fd633433b0534bffa2cf7150749f6617879b8f58322d0960761a +size 15266 diff --git a/detail_png/Shaft_02790_title.png b/detail_png/Shaft_02790_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e5e323624c3664f09dcb3a0388f311be5faf87ba --- /dev/null +++ b/detail_png/Shaft_02790_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86bdf2faff84fe59b2d6bb993872f455aad6c426ca6325ed2aab5d2627bef7f0 +size 15826 diff --git a/detail_png/Shaft_02793_diam.png b/detail_png/Shaft_02793_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..579ca5a911f83675dab373875ea93063607c1823 --- /dev/null +++ b/detail_png/Shaft_02793_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:292fbcbffb624eb036a8e7f43092b832132066cb2ac3f61929e96a17d20dd35c +size 25687 diff --git a/detail_png/Shaft_02793_length.png b/detail_png/Shaft_02793_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e75dab99297b646063145bfcb01ea95a9cdedf17 --- /dev/null +++ b/detail_png/Shaft_02793_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2c49ef02c43adc3fe513633576024f923659a5b121cc752134708b3cbdbf4a6 +size 33862 diff --git a/detail_png/Shaft_02793_title.png b/detail_png/Shaft_02793_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f5b9546740ac9f0f700d345aa36a3cd958278ef5 --- /dev/null +++ b/detail_png/Shaft_02793_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:092cbaac6b62f89aa23f48a069a03e2a2fdf760c649fbf8a57c5126b9aba9af0 +size 33311 diff --git a/detail_png/Shaft_02794_diam.png b/detail_png/Shaft_02794_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..654ca1c3f716b2f90a6b3bc90662a6e6b11e1fb3 --- /dev/null +++ b/detail_png/Shaft_02794_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55bd613c7b4dea50c85c33b9cb73c68c70ca573fcb13b9a547d7f75ca38c6105 +size 26697 diff --git a/detail_png/Shaft_02794_length.png b/detail_png/Shaft_02794_length.png new file mode 100644 index 0000000000000000000000000000000000000000..caabfb816eec6caf5a01e17dda2807273c9d5d64 --- /dev/null +++ b/detail_png/Shaft_02794_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1833ce39ddd324aba7b208804d69f23088ccbbf90e981e74e49287db0182bc9 +size 29386 diff --git a/detail_png/Shaft_02794_title.png b/detail_png/Shaft_02794_title.png new file mode 100644 index 0000000000000000000000000000000000000000..77bd34517f17a04a021674092362d5558b7e1a19 --- /dev/null +++ b/detail_png/Shaft_02794_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e42f76513a5d2ab8c8fa5a8b0e20b61b2c42b6b46559ddb205d06f7256dfc9c +size 31878 diff --git a/detail_png/Shaft_02799_diam.png b/detail_png/Shaft_02799_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c222fd4fb16ab7b2b386547021dc4155a5b95ba9 --- /dev/null +++ b/detail_png/Shaft_02799_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb5e1a860b08eea0a7d26a0f64d979170821775801aa259536f657defcfe4e6e +size 18884 diff --git a/detail_png/Shaft_02799_length.png b/detail_png/Shaft_02799_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c733e858918d2d2c5efd6b72e1f36ddebe0469e4 --- /dev/null +++ b/detail_png/Shaft_02799_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d0cb3221bffec98a854409b2ce9d6100485b3b4065dbf6a23046fc095246f02 +size 16970 diff --git a/detail_png/Shaft_02799_title.png b/detail_png/Shaft_02799_title.png new file mode 100644 index 0000000000000000000000000000000000000000..300da2a053a268039ecdab2018cfb9fa31f1e276 --- /dev/null +++ b/detail_png/Shaft_02799_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9022983f7eeb89a5e782b96855f16e310650a413f455ce3df1e67b67a687419b +size 18124 diff --git a/detail_png/Shaft_02801_diam.png b/detail_png/Shaft_02801_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..facbb1b61cb7d77bf06ab7f1f3a6a8e390ed183b --- /dev/null +++ b/detail_png/Shaft_02801_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8304dfe8c88351200a4c840ff142b094cb0ac1c951abcd5330b879f813660777 +size 35568 diff --git a/detail_png/Shaft_02801_length.png b/detail_png/Shaft_02801_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e0f8d95ee8ad02fe518d7fe53a3bef34f0e68618 --- /dev/null +++ b/detail_png/Shaft_02801_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fc8b00c2b63bb7531e15d00b6fa0be5d4fe8b7c72bca1c3f8c003ca353b5972 +size 25324 diff --git a/detail_png/Shaft_02801_title.png b/detail_png/Shaft_02801_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a36def44eacfaa33be825212211e5c796338c9eb --- /dev/null +++ b/detail_png/Shaft_02801_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19fa572c1fbd9902f1786177a663be07f37a3278de6b6e1cf201404fadf4838d +size 18659 diff --git a/detail_png/Shaft_02802_diam.png b/detail_png/Shaft_02802_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ea62b36e30fb99a87f966c05c35ef0697987cb5a --- /dev/null +++ b/detail_png/Shaft_02802_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:868c79d1a9641ac4e2e8aefe9664537a79af37b3f91f193855c47b2a01cac477 +size 34959 diff --git a/detail_png/Shaft_02802_length.png b/detail_png/Shaft_02802_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d7930666c9e89b55ac5c047209079ba4d4aabd19 --- /dev/null +++ b/detail_png/Shaft_02802_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69cf933156f7488a690f107c24eaa89966702eb74fa3ff8026f7798baac73f6d +size 34186 diff --git a/detail_png/Shaft_02802_title.png b/detail_png/Shaft_02802_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0d2f3a09838f88f17ee61e8e00e7511ec37ab6e7 --- /dev/null +++ b/detail_png/Shaft_02802_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1aebb60e7974959e0f0ac015886d45519506b8ce7e2e90281d604ff8e3ee09d3 +size 35881 diff --git a/detail_png/Shaft_02803_diam.png b/detail_png/Shaft_02803_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3f9e5474d9be073ba8f7b283acd783eef239fd3a --- /dev/null +++ b/detail_png/Shaft_02803_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e12160aaf167a86470d5e67910f237c5f634427da05b506868c87d6e14d77c7c +size 18989 diff --git a/detail_png/Shaft_02803_length.png b/detail_png/Shaft_02803_length.png new file mode 100644 index 0000000000000000000000000000000000000000..584d7a50343203373f9ceb311aef5421a4902217 --- /dev/null +++ b/detail_png/Shaft_02803_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a203b53df957b1a66764fe5371f2bd0448c2bfdf3e57aa632e41ec56c3299a8 +size 16667 diff --git a/detail_png/Shaft_02803_title.png b/detail_png/Shaft_02803_title.png new file mode 100644 index 0000000000000000000000000000000000000000..04d5c0159d663ce385188d3093ea1345b29db562 --- /dev/null +++ b/detail_png/Shaft_02803_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0966eb37a653fda290fb8c17c2ff5050da1cff713b2a2982dc5d12e1fe204ba6 +size 22863 diff --git a/detail_png/Shaft_02807_diam.png b/detail_png/Shaft_02807_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..633a6857f3a9e85f0c1f793c2fc16c1b652d0d47 --- /dev/null +++ b/detail_png/Shaft_02807_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0606c8815d7f095c884f1c937c0c862ca119a007e270355340253c439bd7c182 +size 31645 diff --git a/detail_png/Shaft_02807_length.png b/detail_png/Shaft_02807_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fc75918a96ecffa087669b912dbada1fb4f35bd0 --- /dev/null +++ b/detail_png/Shaft_02807_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b55eb301039a2a3105f5ae1f63a3e602d721fa4df71196c0a06665745a1ad36f +size 44369 diff --git a/detail_png/Shaft_02807_title.png b/detail_png/Shaft_02807_title.png new file mode 100644 index 0000000000000000000000000000000000000000..72b30ceaa358d4ebfc939af66cd0115737f9d81c --- /dev/null +++ b/detail_png/Shaft_02807_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a97bda411c57e4d379f2b33b0f7eefc3d7089ce6910177871906001b5f965d1 +size 30624 diff --git a/detail_png/Shaft_02810_diam.png b/detail_png/Shaft_02810_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e060991f1d7ad55aca8d671f74f108f0396517a3 --- /dev/null +++ b/detail_png/Shaft_02810_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dff8dc20e073712eb942aa742d1750901b1ece269313a3bed3d6dc2edc386d8 +size 20289 diff --git a/detail_png/Shaft_02810_length.png b/detail_png/Shaft_02810_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fd26b52a8b3727428ed2f721e1b942dc480b7e2b --- /dev/null +++ b/detail_png/Shaft_02810_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04a776e359ac119644d15394c7e2a9e7e218763ed19165c9a88eb889815f237e +size 18443 diff --git a/detail_png/Shaft_02810_title.png b/detail_png/Shaft_02810_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5787beaa63d743724859d56e612d6be66dfc5322 --- /dev/null +++ b/detail_png/Shaft_02810_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f99478483f4bc67da8ab5d8a0c5a3aa719c7b2c24cfb35ed3ae42361f9374273 +size 22979 diff --git a/detail_png/Shaft_02811_diam.png b/detail_png/Shaft_02811_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d433b0cc9af419723b151b2e9c747c98772ae62e --- /dev/null +++ b/detail_png/Shaft_02811_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:441a870b3e39aaac02b48f2ba91816f496e41a1caebbe138a3b19e7c0410fa2e +size 30352 diff --git a/detail_png/Shaft_02811_length.png b/detail_png/Shaft_02811_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ec03751875b37473d207cd0f120d8edddd7c5e01 --- /dev/null +++ b/detail_png/Shaft_02811_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb59b8d5145164509647be84ff6cb85d2d38ce8cae0a58e1d5cbde660c718c56 +size 25816 diff --git a/detail_png/Shaft_02811_title.png b/detail_png/Shaft_02811_title.png new file mode 100644 index 0000000000000000000000000000000000000000..de764d709f49b1cd5f28f509bf168f83bea3e9d7 --- /dev/null +++ b/detail_png/Shaft_02811_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:461afd2459544c740fde7415668289b70503390dbf9a2b3d117b5dfd4078ca54 +size 23588 diff --git a/detail_png/Shaft_02815_diam.png b/detail_png/Shaft_02815_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dff5731f2ddaebbb1abf25d91c42cd8e369dab0f --- /dev/null +++ b/detail_png/Shaft_02815_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afc69e377856d7da7979baaa6c6a251132342b5b2e96fd11c6ac739e101e9a90 +size 35346 diff --git a/detail_png/Shaft_02815_length.png b/detail_png/Shaft_02815_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e9e3c0374d49344e3b4bc3975e1d73459a4182b4 --- /dev/null +++ b/detail_png/Shaft_02815_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af1fb50890a3737be0462cab26f2710c667c6bfcf1a1194e9f5cee20b7bbd6ca +size 43193 diff --git a/detail_png/Shaft_02815_title.png b/detail_png/Shaft_02815_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ee05b4cfa2753e4ec39619a83ab5fb6a68444b48 --- /dev/null +++ b/detail_png/Shaft_02815_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4a76b8b6b9988f1f157e568dc37481ab2ea6040fa7ffdc6aa1dd9ade0f8392c +size 32386 diff --git a/detail_png/Shaft_02817_diam.png b/detail_png/Shaft_02817_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9aedb8525037c4d7055f5a4fe04ffc800b9359a7 --- /dev/null +++ b/detail_png/Shaft_02817_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:235fbf465b5e34d01f722f9c2a128e3daa05982b5b3692dcee30954a212f18c7 +size 20227 diff --git a/detail_png/Shaft_02817_length.png b/detail_png/Shaft_02817_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ec3d94ef0ec4af19ae0dbee5dda6ecf263b627ed --- /dev/null +++ b/detail_png/Shaft_02817_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d07b0603692b6b1cc37e008690e1ca47c9240e627ab94b0b72bd6c816f2b19cf +size 23089 diff --git a/detail_png/Shaft_02817_title.png b/detail_png/Shaft_02817_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5cc79601c455cdafed3f9e39e74a4144cc671902 --- /dev/null +++ b/detail_png/Shaft_02817_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:688a7bbc859b40ee80ea1aece0480aa82a3b3b21957c5fb9a7cc4cf74f1cfc68 +size 34781 diff --git a/detail_png/Shaft_02821_diam.png b/detail_png/Shaft_02821_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b81ca8663c260a61c6956c2ce7224af6d374db02 --- /dev/null +++ b/detail_png/Shaft_02821_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e830b8d51d9f75ee65e92d615d95d58b569d433a3c272aedfbbb84e5df09c27 +size 34565 diff --git a/detail_png/Shaft_02821_length.png b/detail_png/Shaft_02821_length.png new file mode 100644 index 0000000000000000000000000000000000000000..16349a10458c95d8aac2f555ac8eff69e01a2610 --- /dev/null +++ b/detail_png/Shaft_02821_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d142fa437445112fa18ad5d104621add882cc29463997743419932dd09bbf3b0 +size 31266 diff --git a/detail_png/Shaft_02821_title.png b/detail_png/Shaft_02821_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f3cb935cb33410565f74ea37c29ecc817bee6972 --- /dev/null +++ b/detail_png/Shaft_02821_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d7bc49d21acd18be6da1e0628da8c983002ec24b148c7d5e0846c67574dac5c +size 26247 diff --git a/detail_png/Shaft_02824_diam.png b/detail_png/Shaft_02824_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9addb127757fa9b03efc3136b0ad6628e011ca14 --- /dev/null +++ b/detail_png/Shaft_02824_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1c4c23751203e944638e087a78dd08e3c1650a43830d15777208aa4fd711eea +size 20155 diff --git a/detail_png/Shaft_02824_length.png b/detail_png/Shaft_02824_length.png new file mode 100644 index 0000000000000000000000000000000000000000..47d5da0a54afaed16656c68875ee0829ca2efaf1 --- /dev/null +++ b/detail_png/Shaft_02824_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53d5cafd5f5149d37fffda3fed24e30a829316243e38fde1e49c61f035a523a7 +size 24781 diff --git a/detail_png/Shaft_02824_title.png b/detail_png/Shaft_02824_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5ce74ed2aa4619c616a549a056df110565e77e12 --- /dev/null +++ b/detail_png/Shaft_02824_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4278cb421af92acaa8044190c8682fcd9ed6f1ee995336e0280019a04d4a3eb +size 32158 diff --git a/detail_png/Shaft_02825_diam.png b/detail_png/Shaft_02825_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..255205694a43507ba61a10d25ad3288cfdbe6cd0 --- /dev/null +++ b/detail_png/Shaft_02825_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec575ecd523ead1cf45a9fc77e6ac97ce10230c0566231ae0b0f7d917347a411 +size 37533 diff --git a/detail_png/Shaft_02825_length.png b/detail_png/Shaft_02825_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c16ddfecb953440e9201029ca0d79c57953d42c --- /dev/null +++ b/detail_png/Shaft_02825_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8ca4c98ae6bd0e522d1610a405c5ab8f316e113c5a5c51c7e525f42e2812289 +size 32597 diff --git a/detail_png/Shaft_02825_title.png b/detail_png/Shaft_02825_title.png new file mode 100644 index 0000000000000000000000000000000000000000..602f294e421dbf7ab201656995011417985e23e8 --- /dev/null +++ b/detail_png/Shaft_02825_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4842af93ab70f1871db90a340462d3c1605dde86d61939d1512b9efb4e21eb84 +size 25885 diff --git a/detail_png/Shaft_02828_diam.png b/detail_png/Shaft_02828_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fcbfb19fca6b47906f480a1c5014c1a220802a8b --- /dev/null +++ b/detail_png/Shaft_02828_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:623d86d73cf74edb39622ff7dc569e33575a834e597a1e4a5f5746140fa2dbda +size 25528 diff --git a/detail_png/Shaft_02828_length.png b/detail_png/Shaft_02828_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5666750b3db7d1c295de9e0968a5bf20f261e184 --- /dev/null +++ b/detail_png/Shaft_02828_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eab75d1a03a8cafe64b82977219571b08c1d758a905c2eafa8163f294a208112 +size 21206 diff --git a/detail_png/Shaft_02828_title.png b/detail_png/Shaft_02828_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a86be4b92cdcc21488089ba94d96d482ffd10bf3 --- /dev/null +++ b/detail_png/Shaft_02828_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a01aec295cb9566074ad94b5b317803253dc961e9c2c17915d07812ac7ba8c6 +size 26277 diff --git a/detail_png/Shaft_02834_diam.png b/detail_png/Shaft_02834_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..55925bff74adbe184c14d1b2ae12306218c1d32a --- /dev/null +++ b/detail_png/Shaft_02834_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2093683ae2e75124f1aeb73242b087e0d56e902d79fdec5d915857433143837 +size 24360 diff --git a/detail_png/Shaft_02834_length.png b/detail_png/Shaft_02834_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f8f3e48674fab09a8d19e4feb1f57103b6d8057d --- /dev/null +++ b/detail_png/Shaft_02834_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac7fb9b2deb2534bf075d601899245394721e7bf9fd149c003bf16bbc54ea4ea +size 23780 diff --git a/detail_png/Shaft_02834_title.png b/detail_png/Shaft_02834_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b04bd0b20649e77ddc2224c44235e09cdde1db01 --- /dev/null +++ b/detail_png/Shaft_02834_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2755033aa5e4c80932a54337c4bb250bafc516f4bc19b5a1d661bb9d3a4b2be +size 32529 diff --git a/detail_png/Shaft_02836_diam.png b/detail_png/Shaft_02836_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..496cfb996a9fe3ac3e834523404cab7856ca39c6 --- /dev/null +++ b/detail_png/Shaft_02836_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a28efde487cdc38d9331f3ff62118c4b272d830c98d2f78cf730a7b58c36ddba +size 33787 diff --git a/detail_png/Shaft_02836_length.png b/detail_png/Shaft_02836_length.png new file mode 100644 index 0000000000000000000000000000000000000000..df6fca9bbab5115ddf4e1234aca67570d5a1fd43 --- /dev/null +++ b/detail_png/Shaft_02836_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77e865a3eb93a46f54d83fa8f30a6b437b2309cbf129cdc3c4192023c0937573 +size 30095 diff --git a/detail_png/Shaft_02836_title.png b/detail_png/Shaft_02836_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8f69623b8016bc47c7b2e5e9a6d0069efb3c5785 --- /dev/null +++ b/detail_png/Shaft_02836_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05e258a2e873b7568417cdbe99f0426d297ada0c82b8aabcee34a09b3c0b905f +size 33290 diff --git a/detail_png/Shaft_02837_diam.png b/detail_png/Shaft_02837_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4caec8ff57ba849fed8dbc5bed5250ca60a21cf5 --- /dev/null +++ b/detail_png/Shaft_02837_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d27eb146a1e601d6bc11334bc993bd05379e6ef399a29424b3c288b64d5fb217 +size 24894 diff --git a/detail_png/Shaft_02837_length.png b/detail_png/Shaft_02837_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77a6743078417ecc1c7bf877e12a42ca5e8456cd --- /dev/null +++ b/detail_png/Shaft_02837_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cb532b3f71ed785f6d327a9328495704df9e4316f75ce28554965707dd3810e +size 34301 diff --git a/detail_png/Shaft_02837_title.png b/detail_png/Shaft_02837_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c21f39bf50561e8b671946ae40df3d1525b0a677 --- /dev/null +++ b/detail_png/Shaft_02837_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d206faae9a60d773a4d38f13fd28405999f88ee84b47abed01c636a7724f9a48 +size 32889 diff --git a/detail_png/Shaft_02840_diam.png b/detail_png/Shaft_02840_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e628019db92032c6f42a56573b99adf43ff1385b --- /dev/null +++ b/detail_png/Shaft_02840_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9059eec52d35b208a43aac63ac4110cfd8eea4195ef0003c460f2c4725a7fccc +size 24768 diff --git a/detail_png/Shaft_02840_length.png b/detail_png/Shaft_02840_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7bb37000f40e2a9a8c37a8803cfd8d45afd5784e --- /dev/null +++ b/detail_png/Shaft_02840_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:906d808f2d88a7918ae2e3a769c3758c5b837c05aa29bbb1720debac4fbde594 +size 20118 diff --git a/detail_png/Shaft_02840_title.png b/detail_png/Shaft_02840_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31a551ce35bb7546c5f58a6e27a1955eb3b4e31f --- /dev/null +++ b/detail_png/Shaft_02840_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f21cc2fae9e7df67feea18ac69af7812298eb2938ce7b2d492ec029b4a3a7b8 +size 30029 diff --git a/detail_png/Shaft_02844_diam.png b/detail_png/Shaft_02844_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..30a419864d9b245e0b5c64f387099db85dc610f7 --- /dev/null +++ b/detail_png/Shaft_02844_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76f7adbb037a465c49bc6a486fc77a2d08dcf1f4953b77341976e803d746589e +size 24827 diff --git a/detail_png/Shaft_02844_length.png b/detail_png/Shaft_02844_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0e390f3f029758aebf6b4d9cb8dfc25e78c39d7d --- /dev/null +++ b/detail_png/Shaft_02844_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2adc453754bb021f4e1a493eb79aa070509c47dbc7bb08cd6122936be8b04cc3 +size 23662 diff --git a/detail_png/Shaft_02844_title.png b/detail_png/Shaft_02844_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5957f044f79bf3ea8cb80d8aa3300adddde9b19a --- /dev/null +++ b/detail_png/Shaft_02844_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:928e3c94967193910de84ee7c9edecfc00271efa3469ae6904c7cc2f6dcfd0c9 +size 28721 diff --git a/detail_png/Shaft_02846_diam.png b/detail_png/Shaft_02846_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c44505b0127f974a09b0992ad22d3a9908d60eee --- /dev/null +++ b/detail_png/Shaft_02846_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:587f8c1b8b09bd5c21edade5564d956c23144a6606847ea7ad63c791d597b254 +size 32249 diff --git a/detail_png/Shaft_02846_length.png b/detail_png/Shaft_02846_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d496b918f0bca3835837ec201af71fd255c5c5f4 --- /dev/null +++ b/detail_png/Shaft_02846_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c4a44be55152e3cfbde784997100111bf95b08c3351cde6984202ab598acf06 +size 44623 diff --git a/detail_png/Shaft_02846_title.png b/detail_png/Shaft_02846_title.png new file mode 100644 index 0000000000000000000000000000000000000000..554b86c46ec6e1fdde539c45d1ffe1c3cf68b44f --- /dev/null +++ b/detail_png/Shaft_02846_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2436b8ba8e98b9ee97b73eb09fd958e7bda8035f6c09e4b7024f3e207cfca91 +size 36358 diff --git a/detail_png/Shaft_02850_diam.png b/detail_png/Shaft_02850_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2b825bfdfde491fb799ed9307400e9c90e471b47 --- /dev/null +++ b/detail_png/Shaft_02850_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef9e1ba0f634838cd1d075f056d6c7071c050a2c75329cb0f655d6b7a46b9d66 +size 20712 diff --git a/detail_png/Shaft_02850_length.png b/detail_png/Shaft_02850_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bc8ba69aba5d8ebc4698795f49e013fa9997698f --- /dev/null +++ b/detail_png/Shaft_02850_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25183300ffd64922fdd1454cc15963d04a773b0588de23d6013a8d51a2d19a8a +size 16707 diff --git a/detail_png/Shaft_02850_title.png b/detail_png/Shaft_02850_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29afc05fc5c8e44aea6c1a886b13b0b4c43b2dcc --- /dev/null +++ b/detail_png/Shaft_02850_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4257f74f333a9784c79101ef019dddeda9e7ed4d4370eb5e6cb6787f0574d562 +size 16028 diff --git a/detail_png/Shaft_02852_diam.png b/detail_png/Shaft_02852_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8fcea8b37f06325a7d28276d66823b1cab9469cd --- /dev/null +++ b/detail_png/Shaft_02852_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bb77cb6d1f52aea4262c0015706e70895fcfa558722b79b58570929367f07b0 +size 30227 diff --git a/detail_png/Shaft_02852_length.png b/detail_png/Shaft_02852_length.png new file mode 100644 index 0000000000000000000000000000000000000000..03469fa948e8e99671bd959b17180ea3cae65ce7 --- /dev/null +++ b/detail_png/Shaft_02852_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67da0be52c25267827751d2df93c9233b99bad46ac3fe724c4096e822c3a1a4c +size 32508 diff --git a/detail_png/Shaft_02852_title.png b/detail_png/Shaft_02852_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e057c5e11d9bcf21e70e6dd932dd448357039ccd --- /dev/null +++ b/detail_png/Shaft_02852_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cd1eb0f700679b24d463b13e56030424be2e3f58002cb63f89f43e2a5b998c9 +size 29656 diff --git a/detail_png/Shaft_02853_diam.png b/detail_png/Shaft_02853_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8c15830ed09050bcb494875867aed0b9967a823b --- /dev/null +++ b/detail_png/Shaft_02853_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fa42097d2558277c337b1fd102fe607daa545539adcae88a3902577a462d5d9 +size 28391 diff --git a/detail_png/Shaft_02853_length.png b/detail_png/Shaft_02853_length.png new file mode 100644 index 0000000000000000000000000000000000000000..039d1d5d38c7b0c61a32d8089dcc41df4fb4b0c2 --- /dev/null +++ b/detail_png/Shaft_02853_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:298bfa2400d5ad4022e8c64cbd1d142c2ce14e40602729be357e04971ab809d5 +size 25765 diff --git a/detail_png/Shaft_02853_title.png b/detail_png/Shaft_02853_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f0f3573886192bf359820b349bf844048e26a7f7 --- /dev/null +++ b/detail_png/Shaft_02853_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49e86144c6c405284ae24831408d4d7e7cf62a35992da5014361b7b163f03dce +size 36211 diff --git a/detail_png/Shaft_02854_diam.png b/detail_png/Shaft_02854_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..905cc606fd37e23bf097c2f106b994024de54288 --- /dev/null +++ b/detail_png/Shaft_02854_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65f3b5955508a714b09722461d072ceb6be723a9f463dbb6693cb1e4f2a4a909 +size 26247 diff --git a/detail_png/Shaft_02854_length.png b/detail_png/Shaft_02854_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e9a875ff3111de8373eb274f5346dd77be9dfdec --- /dev/null +++ b/detail_png/Shaft_02854_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c95e6f1439d04663ba6991cb43e81635cbd3b94b21fe030ff07dcadf643560c8 +size 25443 diff --git a/detail_png/Shaft_02854_title.png b/detail_png/Shaft_02854_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c8bab0ac6781a84829410f16c51b120d39ddba0f --- /dev/null +++ b/detail_png/Shaft_02854_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21faf63097528c2571fd6cb6af2784b9a41e68613a6862e803780dbcb605c254 +size 31992 diff --git a/detail_png/Shaft_02855_diam.png b/detail_png/Shaft_02855_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bb464b43d57f27a87befd493d5c64ef1aa78e8bc --- /dev/null +++ b/detail_png/Shaft_02855_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:610da41ab22fa64aac4dae438812981c64a4c25cfeba32346b4edbee5af24f41 +size 24059 diff --git a/detail_png/Shaft_02855_length.png b/detail_png/Shaft_02855_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0e888a2860cc1b86b956f439240ab099eb176a57 --- /dev/null +++ b/detail_png/Shaft_02855_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a679ca1e9680332b56462a11b41db0fcdd8005125dc53c3c8073596820a5907 +size 20022 diff --git a/detail_png/Shaft_02855_title.png b/detail_png/Shaft_02855_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9e9c28937c7ca679b16548cda06f73e557ce0ce1 --- /dev/null +++ b/detail_png/Shaft_02855_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4bb2204b2f4de6fcf92bdff14d1786bf3f864e6d76d06cb195fd5ae6f607b47 +size 28973 diff --git a/detail_png/Shaft_02857_diam.png b/detail_png/Shaft_02857_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d9979174e74330504e66b14bf70a59125ef66358 --- /dev/null +++ b/detail_png/Shaft_02857_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7074c70b03b5479cfb9f785a196cad466ae45f530aac29b3e32975ddb46da4e4 +size 32848 diff --git a/detail_png/Shaft_02857_length.png b/detail_png/Shaft_02857_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9dce20eda031220129f1737484d84e880e6dece7 --- /dev/null +++ b/detail_png/Shaft_02857_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c0711fd50fe61217f9e909e958f09b5807f1fb6fcb34a1e091ee2f93b078280 +size 27900 diff --git a/detail_png/Shaft_02857_title.png b/detail_png/Shaft_02857_title.png new file mode 100644 index 0000000000000000000000000000000000000000..62104dde386285e2406ad23bf8a361cc8837a9e9 --- /dev/null +++ b/detail_png/Shaft_02857_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:571f3226ece056b85ad8556baaece2df8306d4f863e014064e3a940a1f4dd908 +size 29895 diff --git a/detail_png/Shaft_02859_diam.png b/detail_png/Shaft_02859_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4840e162ae19176d8abcd0a2432a4fdb944eb6da --- /dev/null +++ b/detail_png/Shaft_02859_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c13618b404d66f01399388b7c283d4f6aee2931ed9e6ca4cd6c230c842c41cbf +size 25433 diff --git a/detail_png/Shaft_02859_length.png b/detail_png/Shaft_02859_length.png new file mode 100644 index 0000000000000000000000000000000000000000..93e50fa95063b93aeae409507048743b8536f777 --- /dev/null +++ b/detail_png/Shaft_02859_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3749ab7f561f420a23f195abaefe06bcf8ae96cc909570d9467b17b865da34d8 +size 34757 diff --git a/detail_png/Shaft_02859_title.png b/detail_png/Shaft_02859_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8497d2d3a867cea5a451e368c5d2b146908840c7 --- /dev/null +++ b/detail_png/Shaft_02859_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c19047ec1ea004796760b3a123f4cfaf538f72e3246af86093b4b44ffce7ab02 +size 30548 diff --git a/detail_png/Shaft_02860_diam.png b/detail_png/Shaft_02860_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..91684b730f957460864804f36c65a4a4d70da285 --- /dev/null +++ b/detail_png/Shaft_02860_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3412037799992b055865f0c91088ddba4196caba932c5b19b6667d0d059154d3 +size 19627 diff --git a/detail_png/Shaft_02860_length.png b/detail_png/Shaft_02860_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ec4c151992877212129453a7ae61641216792158 --- /dev/null +++ b/detail_png/Shaft_02860_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abd2e599eed82434db173281add52a1aa6aabbde5631e7e5545acc62dd1bc204 +size 16609 diff --git a/detail_png/Shaft_02860_title.png b/detail_png/Shaft_02860_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2b48c2604f3eab5a3db7d718f42f71e33928ad63 --- /dev/null +++ b/detail_png/Shaft_02860_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:726120b0d21255a56764d528ef7f29da0df45623071d9d611be916ef81a6290b +size 17543 diff --git a/detail_png/Shaft_02863_diam.png b/detail_png/Shaft_02863_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..234e291086c90bee69c0eade501250128e9484b3 --- /dev/null +++ b/detail_png/Shaft_02863_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b45f76f6ec96172d2dced308660cbbc6b33b36a1ec7256afcf4f4f6289a49304 +size 19800 diff --git a/detail_png/Shaft_02863_length.png b/detail_png/Shaft_02863_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4250b0ac2c7d7ff2dfcaaf5965071a269aa15d6a --- /dev/null +++ b/detail_png/Shaft_02863_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98a159b5fe9197d348c2949dc9cb4b83317d258542fb25de7105996dca5da7fb +size 18476 diff --git a/detail_png/Shaft_02863_title.png b/detail_png/Shaft_02863_title.png new file mode 100644 index 0000000000000000000000000000000000000000..09663424d0e168526fc21d4ebe350ed167281960 --- /dev/null +++ b/detail_png/Shaft_02863_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c225c34653cf9fa307dcc714b3e8149166f443787084a7d67098b421baefea4a +size 23499 diff --git a/detail_png/Shaft_02864_diam.png b/detail_png/Shaft_02864_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d764058f7e7f5fe95d34f25e98e068702f510d14 --- /dev/null +++ b/detail_png/Shaft_02864_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b82f8834ab76746f05b359db3ed1952f6adc492d8cd489f034cc1d05c4989ceb +size 20396 diff --git a/detail_png/Shaft_02864_length.png b/detail_png/Shaft_02864_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1f0269221e8adb9b5cdcba58467d57b0a7222933 --- /dev/null +++ b/detail_png/Shaft_02864_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57d8a13f27a381e1a852763442c0467476b77f0cee32a346f89b41a2e4a26dfc +size 25104 diff --git a/detail_png/Shaft_02864_title.png b/detail_png/Shaft_02864_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bc693645cdbc0a10202c8bc35af317d570fd540d --- /dev/null +++ b/detail_png/Shaft_02864_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce99f4dfbac8f838e5d794165df1402ecc8a0b81b0031d23c244a4b0319c4990 +size 30828 diff --git a/detail_png/Shaft_02865_diam.png b/detail_png/Shaft_02865_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..10fd9b94a502b4900a55ca623b36dd4e9070dc91 --- /dev/null +++ b/detail_png/Shaft_02865_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8f13d8b5d7d792ff39c2c53e7f9cc1bde443bb5bac5de9d4ad9eaf2e63e82aa +size 30043 diff --git a/detail_png/Shaft_02865_length.png b/detail_png/Shaft_02865_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3cba3731c72198144771155b5538b3136d450a47 --- /dev/null +++ b/detail_png/Shaft_02865_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa30979ce79c6a8eb8adc5133426fd8b1077e7b4419f419e767a0833f8cb9afd +size 34199 diff --git a/detail_png/Shaft_02865_title.png b/detail_png/Shaft_02865_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ad5ad99ea17c6385eface3343544d21484446e9d --- /dev/null +++ b/detail_png/Shaft_02865_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7ad78c231fa195d2ea7aae2862bbad91e8af48ffd2d6ba9d4ad73f11bf36f51 +size 33603 diff --git a/detail_png/Shaft_02866_diam.png b/detail_png/Shaft_02866_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..814036ec4b09a824e764d5a8bad3b82ff6bcf22f --- /dev/null +++ b/detail_png/Shaft_02866_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd758c3c8fc6efc714db1a00c31cdff192fcb2fe690e47c432763d20433aed0a +size 19919 diff --git a/detail_png/Shaft_02866_length.png b/detail_png/Shaft_02866_length.png new file mode 100644 index 0000000000000000000000000000000000000000..afb78e454b2556220e05d6f4005e27dbb5fbf531 --- /dev/null +++ b/detail_png/Shaft_02866_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:441dac568f60a91ef8cfd1e0b7289687b3147afde24e9b2e3b4288f4e106cecc +size 17195 diff --git a/detail_png/Shaft_02866_title.png b/detail_png/Shaft_02866_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1db343e53fbb9f55370e33b2cfc6ab843c902196 --- /dev/null +++ b/detail_png/Shaft_02866_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ab7dd5a408ca029a9c4ae4ce0a0fe01d333a26dbf997e432ddec4bb7208de73 +size 18740 diff --git a/detail_png/Shaft_02880_diam.png b/detail_png/Shaft_02880_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ec078e207ab40e3a3e714beea8d0e74289b8b392 --- /dev/null +++ b/detail_png/Shaft_02880_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccd6e269efabeeed2cf3249cf026af977baf7007fddb1bb32f4cd76af0222163 +size 32529 diff --git a/detail_png/Shaft_02880_length.png b/detail_png/Shaft_02880_length.png new file mode 100644 index 0000000000000000000000000000000000000000..452555e469e1b86606a41d75e8978dd1c24ebbcb --- /dev/null +++ b/detail_png/Shaft_02880_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a522363a7ad5546f8114c97f0acde3d7a2c52055d5ad51ff6ce7f9f5067b408c +size 46440 diff --git a/detail_png/Shaft_02880_title.png b/detail_png/Shaft_02880_title.png new file mode 100644 index 0000000000000000000000000000000000000000..40b5e8401b27b1f78cab23560ccb964aec8ec1ea --- /dev/null +++ b/detail_png/Shaft_02880_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:520d9ce4aeb6c2dd2e2366a70dfce6dfc4a1a5654a1b64d436fba20795e13f0d +size 37173 diff --git a/detail_png/Shaft_02882_diam.png b/detail_png/Shaft_02882_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d93055d6bba50f2e7312bde5b57bea9b02b943e5 --- /dev/null +++ b/detail_png/Shaft_02882_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e228449e0252a78eaee48fbf40399bbf3e1982f4ccd7091c6d1340acd19e2964 +size 25876 diff --git a/detail_png/Shaft_02882_length.png b/detail_png/Shaft_02882_length.png new file mode 100644 index 0000000000000000000000000000000000000000..72c7ae3dbfd56aecf3acbb940a2888011050e1aa --- /dev/null +++ b/detail_png/Shaft_02882_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed56bc909b8eb609ae9993830d4067cfe6f70a220b785d3f574445940b0781bf +size 27271 diff --git a/detail_png/Shaft_02882_title.png b/detail_png/Shaft_02882_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a0a20f4afa4bb65a5c0b3fc7253a6f47e58bc333 --- /dev/null +++ b/detail_png/Shaft_02882_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a884d7d127855483d65a918bd80ffc8026a5d23f7bf0f058308b080a70ab9b6 +size 33092 diff --git a/detail_png/Shaft_02885_diam.png b/detail_png/Shaft_02885_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..926c1307efac5678e50142addaba1314380cdca4 --- /dev/null +++ b/detail_png/Shaft_02885_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eee74b07d765c6169b3ab431c4f0779d2d8db20f3897162225fffbf0695e057b +size 25123 diff --git a/detail_png/Shaft_02885_length.png b/detail_png/Shaft_02885_length.png new file mode 100644 index 0000000000000000000000000000000000000000..01b1f9937a1932579054fb0697f00f8056b84d43 --- /dev/null +++ b/detail_png/Shaft_02885_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08fb0907cfb47b226b0a68bbeb9baa40e3e36f2d6720c57bc34e194c16b18739 +size 20872 diff --git a/detail_png/Shaft_02885_title.png b/detail_png/Shaft_02885_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a469987c508927bc5e432fb520ff35222dfad8f1 --- /dev/null +++ b/detail_png/Shaft_02885_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edecd4c65ef7dd6abd557c185b90161288b554c1493dcda6ea599dfe2c544185 +size 21289 diff --git a/detail_png/Shaft_02891_diam.png b/detail_png/Shaft_02891_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b9d79d4e6a58682b8390eae6ef6ad1d997213953 --- /dev/null +++ b/detail_png/Shaft_02891_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:497b3fce29383b4c9a5efcbca8218bab402a4a97fec9ca80d07ced2f0eaeda55 +size 20247 diff --git a/detail_png/Shaft_02891_length.png b/detail_png/Shaft_02891_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9d4871053eee56075ecc6a993f9a78a488dceccf --- /dev/null +++ b/detail_png/Shaft_02891_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0227e12ee80569e9efa1a7d60f0d2937061da73147df808f5d64d719f139ffd1 +size 17655 diff --git a/detail_png/Shaft_02891_title.png b/detail_png/Shaft_02891_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9333e12bd77167465b5f6793c852c221167c6af3 --- /dev/null +++ b/detail_png/Shaft_02891_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa8fed19bcaa8ea19d7c147500f8be059993cb1995f6bf416f33e81f4ec8a5f7 +size 16372 diff --git a/detail_png/Shaft_02893_diam.png b/detail_png/Shaft_02893_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ec0d0a440681f7470924fb63c14df934c765a1e2 --- /dev/null +++ b/detail_png/Shaft_02893_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67f6aba717dd8ef1c1f3f32303a7958c74025bcec1a00f445209486a61bd7b2b +size 26979 diff --git a/detail_png/Shaft_02893_length.png b/detail_png/Shaft_02893_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ce353ec2eb7106db3f85e7e3bec7d411be491d50 --- /dev/null +++ b/detail_png/Shaft_02893_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f071d3e2e66840276f3335a5570846a378aa826daad22925184855b56ff478f7 +size 30507 diff --git a/detail_png/Shaft_02893_title.png b/detail_png/Shaft_02893_title.png new file mode 100644 index 0000000000000000000000000000000000000000..baba42dd13405d387a4b180c44e962123191fd85 --- /dev/null +++ b/detail_png/Shaft_02893_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1d32a5c8a17785d454ae94c737cd349e4b8b5f70d7b98d3765dae0fa78706a2 +size 33594 diff --git a/detail_png/Shaft_02896_diam.png b/detail_png/Shaft_02896_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bdb576ae1a74909a242b360369c01a80333c15bd --- /dev/null +++ b/detail_png/Shaft_02896_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c00a677ae0b21cd7a16274da71c77d158b55d511ecadd18e81fb50c91437eb2 +size 22784 diff --git a/detail_png/Shaft_02896_length.png b/detail_png/Shaft_02896_length.png new file mode 100644 index 0000000000000000000000000000000000000000..beb1e96509b9bd66b03dafc556ef795c55b2d633 --- /dev/null +++ b/detail_png/Shaft_02896_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7069a964e54280450c3d0b874710d75f1c8bf373af09f7793a6a1096bcde6b1 +size 17737 diff --git a/detail_png/Shaft_02896_title.png b/detail_png/Shaft_02896_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f1949ab3cec201bf8afc9d50d44c7aa8bf96a316 --- /dev/null +++ b/detail_png/Shaft_02896_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b64055127c6e2ea74ea1bc0b3a3878955f65bd41d206395b8daa6dea3f052938 +size 20677 diff --git a/detail_png/Shaft_02898_diam.png b/detail_png/Shaft_02898_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a81a9b267d8845c589858e5b4ca752e25fab726b --- /dev/null +++ b/detail_png/Shaft_02898_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:681729b0ca4d9412e030c6e95b7ef217fc9bdded03585a0e46517099e2309b12 +size 29385 diff --git a/detail_png/Shaft_02898_length.png b/detail_png/Shaft_02898_length.png new file mode 100644 index 0000000000000000000000000000000000000000..45dff6622f09b9a590dfbd7ccfc20ce083dc9563 --- /dev/null +++ b/detail_png/Shaft_02898_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce330e84d8331db8ffccd6183ffcd277c5ac3591770123fb93608a9e4399c242 +size 23567 diff --git a/detail_png/Shaft_02898_title.png b/detail_png/Shaft_02898_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ddf26f922eb6917da47b8060ae3509e3c4ebdfc --- /dev/null +++ b/detail_png/Shaft_02898_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5817e32c7b5f31b7a01d28bbf98a61ee31c8e4fc45d70f9f5acb28fca0d2c5f +size 23554 diff --git a/detail_png/Shaft_02904_diam.png b/detail_png/Shaft_02904_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ea34138fea4f552d64545e2ba2bfa9d4c55e0163 --- /dev/null +++ b/detail_png/Shaft_02904_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d7943e7ed5060423c7bc85b2e2accd3b9a54a166b7337ac1e8667d6f9cad4fe +size 17718 diff --git a/detail_png/Shaft_02904_length.png b/detail_png/Shaft_02904_length.png new file mode 100644 index 0000000000000000000000000000000000000000..846f0cf827c291dc3b982bc7039235155cac0001 --- /dev/null +++ b/detail_png/Shaft_02904_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18f0f1a0c0a62f049ac75356d4704b6d5ff5fd375b09a81cb88a9d9d57173829 +size 16068 diff --git a/detail_png/Shaft_02904_title.png b/detail_png/Shaft_02904_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bf42d3efe6b306528660dee05163fa5ce2a98d5f --- /dev/null +++ b/detail_png/Shaft_02904_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e5e5212fbe9bbbc062b55028ed6d959c7a003efe3cbf426bcd5b307aae38a69 +size 13027 diff --git a/detail_png/Shaft_02909_diam.png b/detail_png/Shaft_02909_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1553fbf565f93a53e9adfa4f8d9c9dadc80dd0f1 --- /dev/null +++ b/detail_png/Shaft_02909_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf5ac545a86e27bc098caeefbf8ee84bd99b3cf9ffca91c1c77125eab29fe731 +size 20149 diff --git a/detail_png/Shaft_02909_length.png b/detail_png/Shaft_02909_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e2222686eb94cd03b00fa65986b4d46f42ac7b24 --- /dev/null +++ b/detail_png/Shaft_02909_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:987e55cb2ed7390c6b5ead7c472ac70f652073672888832575b0d014baee3110 +size 16118 diff --git a/detail_png/Shaft_02909_title.png b/detail_png/Shaft_02909_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f3ff3e39fb7afbd2e9ead15b16f613b33b22ceab --- /dev/null +++ b/detail_png/Shaft_02909_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03c100d375d61e16dcb2bbd458c0185642243c7383b3792ec6cf7dcf200d00a4 +size 19890 diff --git a/detail_png/Shaft_02914_diam.png b/detail_png/Shaft_02914_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bb9e1e29edf0c4d1485888057b720de4ff36c279 --- /dev/null +++ b/detail_png/Shaft_02914_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:797372d06945d8bc8cd3315af2bea9548059348166435af93d2555c1c188f800 +size 26572 diff --git a/detail_png/Shaft_02914_length.png b/detail_png/Shaft_02914_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b554764eb588769ff0f43464cc8d312e643894c4 --- /dev/null +++ b/detail_png/Shaft_02914_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:293090d5620ce1d3621e77d3635c65754993cf7d79f35e6a375f1c191827d098 +size 37644 diff --git a/detail_png/Shaft_02914_title.png b/detail_png/Shaft_02914_title.png new file mode 100644 index 0000000000000000000000000000000000000000..661799c33f9adbd581ff7bab7341738a07d97cf1 --- /dev/null +++ b/detail_png/Shaft_02914_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:308d1a1f29e2700213a76f7f3b72a967852abc3099cf545a426cbd22518dca92 +size 35617 diff --git a/detail_png/Shaft_02920_diam.png b/detail_png/Shaft_02920_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d9d2533aeb8ef258114dfa015b71c94b4aafd7ea --- /dev/null +++ b/detail_png/Shaft_02920_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:397b3c95c8a8b33c6b0ef52f9d195fabc0a8b09e0243c6131ac695cc57863604 +size 21137 diff --git a/detail_png/Shaft_02920_length.png b/detail_png/Shaft_02920_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c219d1dab0aa4b7195d0f072bd51cd979e2db6e2 --- /dev/null +++ b/detail_png/Shaft_02920_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e4457cfd31111d0787aa83cdd2a720f59d12db907a93200ab6afeee244b12d7 +size 19617 diff --git a/detail_png/Shaft_02920_title.png b/detail_png/Shaft_02920_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51c1f735991c644dfdd450d2fdd737b14cc72a89 --- /dev/null +++ b/detail_png/Shaft_02920_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea58182b9aed579696900a2c70f6bf52f8090c2ec27c2b61ed32ada01a88b4cb +size 29390 diff --git a/detail_png/Shaft_02921_diam.png b/detail_png/Shaft_02921_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c5746412360a7e6dfb6d15fb0ae32b476b4c8989 --- /dev/null +++ b/detail_png/Shaft_02921_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6e59c2ada37898736223e5787088b93f2627c453c088fd5b79e503a36f9dd0f +size 24551 diff --git a/detail_png/Shaft_02921_length.png b/detail_png/Shaft_02921_length.png new file mode 100644 index 0000000000000000000000000000000000000000..46442ed70c6fc10567e06c37f62e14669971ce0b --- /dev/null +++ b/detail_png/Shaft_02921_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea79ee5970ce65a6af361d5eaa5761f4a9065e592f6df28386a5d161e687693d +size 21357 diff --git a/detail_png/Shaft_02921_title.png b/detail_png/Shaft_02921_title.png new file mode 100644 index 0000000000000000000000000000000000000000..df6ebf32e7dc959703fa6756b6cf75402ce33ffa --- /dev/null +++ b/detail_png/Shaft_02921_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eee15ada8ec01c3fa142a76f2289b981666fecb2f2296c3a1de2201f02fc089f +size 29477 diff --git a/detail_png/Shaft_02922_diam.png b/detail_png/Shaft_02922_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..801a47ccc9209b0339ed9f6551371b8dbbd69769 --- /dev/null +++ b/detail_png/Shaft_02922_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aaabd1ba36e1c0dbd7c4caf2302f9d2551d02711d00d1b5ab06fb458478df40 +size 19533 diff --git a/detail_png/Shaft_02922_length.png b/detail_png/Shaft_02922_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2759eac0c16b13649ac7671eb4986db2d6f2594d --- /dev/null +++ b/detail_png/Shaft_02922_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1a83760952d638715a3e9826e322f4052abd272583a1157ce78aa8fb6894250 +size 16980 diff --git a/detail_png/Shaft_02922_title.png b/detail_png/Shaft_02922_title.png new file mode 100644 index 0000000000000000000000000000000000000000..606b789b30ced88f9be3f6d6da0d9ea6b98c5511 --- /dev/null +++ b/detail_png/Shaft_02922_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36da21c92378d2e164bf75a13ba3e73719cf434c57394640008b5455bbe25d42 +size 17391 diff --git a/detail_png/Shaft_02924_diam.png b/detail_png/Shaft_02924_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d65a3cbd324e6a74a78db8bb5b522bf3423f0bdd --- /dev/null +++ b/detail_png/Shaft_02924_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ea65b9e11434409dd1cc27dec090c5d873bff051805fd24627dc820a6e165e3 +size 31891 diff --git a/detail_png/Shaft_02924_length.png b/detail_png/Shaft_02924_length.png new file mode 100644 index 0000000000000000000000000000000000000000..befa2f77e555dcbdff15ced72c833f7214a36218 --- /dev/null +++ b/detail_png/Shaft_02924_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d88bcf037aad375b8aac9d62360a43d758d1bf969520f5fa94a486b597cea814 +size 31855 diff --git a/detail_png/Shaft_02924_title.png b/detail_png/Shaft_02924_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b30e21904c38ba8298cfac10761eb26ef85eee37 --- /dev/null +++ b/detail_png/Shaft_02924_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ec7a085e96600034212295ab6e10f561cc998095b73f41c4e99ca57ec1e609d +size 29999 diff --git a/detail_png/Shaft_02926_diam.png b/detail_png/Shaft_02926_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..27a332b89631b3f5ced4d49310928c2c7fdbfbb8 --- /dev/null +++ b/detail_png/Shaft_02926_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43a88ab27c39a40ba1b42411e79a7bb3c53d167bee62d7e0b4768ed0b17c6205 +size 20464 diff --git a/detail_png/Shaft_02926_length.png b/detail_png/Shaft_02926_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6dd9567cc7fcfe5228ff79e8b73f72d552ea9d45 --- /dev/null +++ b/detail_png/Shaft_02926_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d0f9bba29cb8087fb2ecfc947110ff18d34e60efefc664f768ce7123cba6bd1 +size 17948 diff --git a/detail_png/Shaft_02926_title.png b/detail_png/Shaft_02926_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a50cab20a8cd50da76fe390dab54e4729e60519e --- /dev/null +++ b/detail_png/Shaft_02926_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bad8105e48c4417b6b32c17fbb62de36546e14ccafc745d5cc6c617d2837c967 +size 18842 diff --git a/detail_png/Shaft_02927_diam.png b/detail_png/Shaft_02927_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..06891f4145678621327dd8bb41d487c723e40073 --- /dev/null +++ b/detail_png/Shaft_02927_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9433aa50c0138169f35bd08c38c2f79c48053a825212999410ee72db413a8ee5 +size 40476 diff --git a/detail_png/Shaft_02927_length.png b/detail_png/Shaft_02927_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c02d85b383965e9bd70410e8812c79cd7c869f8c --- /dev/null +++ b/detail_png/Shaft_02927_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ce75e76c9db4decfac947926b21b59983c608ff1f5d408bd9b2fea08597d3e4 +size 50336 diff --git a/detail_png/Shaft_02927_title.png b/detail_png/Shaft_02927_title.png new file mode 100644 index 0000000000000000000000000000000000000000..04dcc440638d0806c6c45858d67d59ad0e3f2bec --- /dev/null +++ b/detail_png/Shaft_02927_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a384addef105560908a605640a251ae4ff51749e20f15fe8e16f22723b9489d +size 30280 diff --git a/detail_png/Shaft_02932_diam.png b/detail_png/Shaft_02932_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b86d449fd83f78e798c3aec57c85877b37f11d0c --- /dev/null +++ b/detail_png/Shaft_02932_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efeaca23860c90244a21f0dc8e626a4a0ceb56b4c15ed823129c31cfb11da75c +size 26267 diff --git a/detail_png/Shaft_02932_length.png b/detail_png/Shaft_02932_length.png new file mode 100644 index 0000000000000000000000000000000000000000..68213ab692608dde4c11bde745ebbac264bf8486 --- /dev/null +++ b/detail_png/Shaft_02932_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34800465ca8c8ec6a8cf8eead68a74f961320eca6becf8b7e450f725105ae242 +size 32115 diff --git a/detail_png/Shaft_02932_title.png b/detail_png/Shaft_02932_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9291964fd03e3732dc34ce1af2fdc42266437276 --- /dev/null +++ b/detail_png/Shaft_02932_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:279ebab0069ce54fd5ece0802df49a328eda85a6220dd015a2d2e78be606882e +size 33199 diff --git a/detail_png/Shaft_02942_diam.png b/detail_png/Shaft_02942_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f0ebfa5b2ee8a1e6ad0671c2371a48631842dcac --- /dev/null +++ b/detail_png/Shaft_02942_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ace6533bc44c0d162cbdab4e79d3b2864aa524852e86ac7c0a855c47625d3762 +size 26074 diff --git a/detail_png/Shaft_02942_length.png b/detail_png/Shaft_02942_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fe4c62e55d7497ef76e5905e578081163699a701 --- /dev/null +++ b/detail_png/Shaft_02942_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:707bb59f7fe86a669ec9d9df98a41d28e00970edabe9283c0fda29ce6cb9d0eb +size 25905 diff --git a/detail_png/Shaft_02942_title.png b/detail_png/Shaft_02942_title.png new file mode 100644 index 0000000000000000000000000000000000000000..39b00afc036ae27e599c9279fdfe14d4a46a11b1 --- /dev/null +++ b/detail_png/Shaft_02942_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b76e0f39ae33b929ba94dad0dec8fdf789e8ac119113159d8320255e828ceebe +size 32040 diff --git a/detail_png/Shaft_02944_diam.png b/detail_png/Shaft_02944_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..329b60ab94d032227e6976d1fea3b9cc55c16b2f --- /dev/null +++ b/detail_png/Shaft_02944_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d07878cc531d9ac4aa636cd2f2e89226d451be18ee6244a6c3d6778073699d4c +size 25433 diff --git a/detail_png/Shaft_02944_length.png b/detail_png/Shaft_02944_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6a9eef06dc9c88037063a4c3fde252dbea8009bb --- /dev/null +++ b/detail_png/Shaft_02944_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce81885dbea0b88d45b74c20cd355fde814a38133b4a70f9ab11329abd189ea +size 24510 diff --git a/detail_png/Shaft_02944_title.png b/detail_png/Shaft_02944_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c2ce24ace4f6ad8cfe57dad648aad221b7db4e7 --- /dev/null +++ b/detail_png/Shaft_02944_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e686f7748e619b0d027c3a18bccef00e283a9b70a353f3c2c18e37dff291c1a +size 28482 diff --git a/detail_png/Shaft_02945_diam.png b/detail_png/Shaft_02945_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4112f69c0feddcc9a1e567756bb0492889c8d1ef --- /dev/null +++ b/detail_png/Shaft_02945_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2957d551743641f58921d1b499a151653c95c423105c768f46c3b3d22d1d96ad +size 26836 diff --git a/detail_png/Shaft_02945_length.png b/detail_png/Shaft_02945_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc77316ed33a2f32442924befe5b2c1b8a2f89a5 --- /dev/null +++ b/detail_png/Shaft_02945_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eccf27b56d6437be35eada8b717ef045173119b3e4e86a3b227750de133a965a +size 37195 diff --git a/detail_png/Shaft_02945_title.png b/detail_png/Shaft_02945_title.png new file mode 100644 index 0000000000000000000000000000000000000000..59d14f433c589c36d4a6b93b978bc3f1348aa259 --- /dev/null +++ b/detail_png/Shaft_02945_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bfd32c88b58b5acdadc08ab2c5081b505417aeba028f6827b77e7d3f9f1dd923 +size 29853 diff --git a/detail_png/Shaft_02950_diam.png b/detail_png/Shaft_02950_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94878ff594347b77e153166e1dff990a8ef09c66 --- /dev/null +++ b/detail_png/Shaft_02950_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4137ff6093560e07f8887c3d889becb6acb277d118cb8a3d8a5faaecd16eb275 +size 27644 diff --git a/detail_png/Shaft_02950_length.png b/detail_png/Shaft_02950_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ab6bc1e0b940ac833bf4b9f2ff24af4970ce3303 --- /dev/null +++ b/detail_png/Shaft_02950_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba709ca9ad5f0cf5a130fd8f62e215cd13047b373016b3444189a8d8862b9964 +size 40718 diff --git a/detail_png/Shaft_02950_title.png b/detail_png/Shaft_02950_title.png new file mode 100644 index 0000000000000000000000000000000000000000..32c62f7905bd91f3e330001c93b8e2be9661ea73 --- /dev/null +++ b/detail_png/Shaft_02950_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6960a8d073f12061c6ce52f5462db6b952692b3b599d282d64b3ad8aa5cf2d29 +size 31088 diff --git a/detail_png/Shaft_02955_diam.png b/detail_png/Shaft_02955_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f9ef1feddb97b2c9e83ab6cd0f0bb2a329bd4c51 --- /dev/null +++ b/detail_png/Shaft_02955_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf4db1cebf9825d5dce1a8ae25221b465e80df4ee4aa330f5e4f0511da04d121 +size 25135 diff --git a/detail_png/Shaft_02955_length.png b/detail_png/Shaft_02955_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b07623ac45394eb4feddcb2841d0c209751ada8 --- /dev/null +++ b/detail_png/Shaft_02955_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:744a3136d371715e8f8381bf7a65bf3cb24540b432f80d4cd7a7b0cc6e6dab8e +size 22279 diff --git a/detail_png/Shaft_02955_title.png b/detail_png/Shaft_02955_title.png new file mode 100644 index 0000000000000000000000000000000000000000..85424b3686ed12fb16ab54e20342e6a41094b2ac --- /dev/null +++ b/detail_png/Shaft_02955_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5c14fe16329b49b1aa7547b0c268c6695f6a3bfd098e0ccf516d757ef0ad445 +size 27446 diff --git a/detail_png/Shaft_02957_diam.png b/detail_png/Shaft_02957_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3c32e1862d6e42fff5092f62e6545b8a982ce6bb --- /dev/null +++ b/detail_png/Shaft_02957_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85f53882ca54c081251a3a4215545454cbd85f57ceec6a4c0c02813cf51e200f +size 18406 diff --git a/detail_png/Shaft_02957_length.png b/detail_png/Shaft_02957_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c1c719613748894470494c1d3067627d691d8f75 --- /dev/null +++ b/detail_png/Shaft_02957_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60c78fe03821b68c054e7080a6b951615addb8432e9a0bcb265aab6c59824a0d +size 17046 diff --git a/detail_png/Shaft_02957_title.png b/detail_png/Shaft_02957_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c6dcbcafa6765baf1b9eeece342ee8ce8219acea --- /dev/null +++ b/detail_png/Shaft_02957_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68e09e26b0bd3023d830f867da6751dffe7e45dcd17310c3cc73cf80d9b453df +size 21959 diff --git a/detail_png/Shaft_02960_diam.png b/detail_png/Shaft_02960_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..999bf995386a605f4e467ac43225412270128d40 --- /dev/null +++ b/detail_png/Shaft_02960_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5fc305b74c14a6364e9e3ecefda3b52744c20e3ffc20afb952dab682c839cfb +size 20211 diff --git a/detail_png/Shaft_02960_length.png b/detail_png/Shaft_02960_length.png new file mode 100644 index 0000000000000000000000000000000000000000..150e8cbaa41b404e168293fa1a0a477b50696350 --- /dev/null +++ b/detail_png/Shaft_02960_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32f0b1c8fe6af2b473f1ce12fc41865b88dcc8aa3bee23647d057620e684c900 +size 25684 diff --git a/detail_png/Shaft_02960_title.png b/detail_png/Shaft_02960_title.png new file mode 100644 index 0000000000000000000000000000000000000000..54fc979a7212c987d209c98454007f8d8602e058 --- /dev/null +++ b/detail_png/Shaft_02960_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8c35560918d87ef7ac41988807e9d3d81e0703c1e3ec13bdd2de3bf86b91b93 +size 31242 diff --git a/detail_png/Shaft_02967_diam.png b/detail_png/Shaft_02967_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4dc8b81d8e9f8bbbd77232534fc1d729388fabd8 --- /dev/null +++ b/detail_png/Shaft_02967_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:671302d1c5758a6a6d44bdbb3109c9631200bb6522d94adabea23c6aa27a8f14 +size 29616 diff --git a/detail_png/Shaft_02967_length.png b/detail_png/Shaft_02967_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4345461a4314a2ae1ede21bb46555cdfd81ab41a --- /dev/null +++ b/detail_png/Shaft_02967_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d304e1b515411ff4828c312dd87087049d675c7b444ca8275a3b184651e2d8b +size 42353 diff --git a/detail_png/Shaft_02967_title.png b/detail_png/Shaft_02967_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f9d641e2807ab58264665a88bf31b9774ddbb964 --- /dev/null +++ b/detail_png/Shaft_02967_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec42764d76b3a1f833a36ab5813014f4de726d8b468a3832c08963766c5fb8dd +size 36246 diff --git a/detail_png/Shaft_02971_diam.png b/detail_png/Shaft_02971_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..50117cce52deedfbfc2574c5182b5560c2d10a97 --- /dev/null +++ b/detail_png/Shaft_02971_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc96503415082bc9a709848b93f4cff0ce1609cec052febaf083fc0cfbd1117c +size 19672 diff --git a/detail_png/Shaft_02971_length.png b/detail_png/Shaft_02971_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2aa974614e7fd949176d4b69a10119a12ad968a1 --- /dev/null +++ b/detail_png/Shaft_02971_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8894dd9f17bb93bb3be95a681e677bfb00a68c6725dd3a7065c26486a40a824 +size 19020 diff --git a/detail_png/Shaft_02971_title.png b/detail_png/Shaft_02971_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e863150c6e3344962227d8379fe1f7771e094387 --- /dev/null +++ b/detail_png/Shaft_02971_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e234a19db26012101c92659abdfbd3a8b496ca92d74fcf8543963bf5b7a440b4 +size 22851 diff --git a/detail_png/Shaft_02974_diam.png b/detail_png/Shaft_02974_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..40b1d824f4bf0384b1f61ae86a2b3f17b7b565bb --- /dev/null +++ b/detail_png/Shaft_02974_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94d2de0a76efa86f52f6b081119e7bec1a9536d1c4ac0fc50c0bed0134174d12 +size 25293 diff --git a/detail_png/Shaft_02974_length.png b/detail_png/Shaft_02974_length.png new file mode 100644 index 0000000000000000000000000000000000000000..70b80b7a1de33ba82014b134bf3f386ccc556e60 --- /dev/null +++ b/detail_png/Shaft_02974_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e6e61ff6572e77e38e0b9ad439fbb63cf42e8c98775a8636c59f88a2ebe468f +size 35718 diff --git a/detail_png/Shaft_02974_title.png b/detail_png/Shaft_02974_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7b12d57fdccc6f24087aa6069bdc3b98b83ee27e --- /dev/null +++ b/detail_png/Shaft_02974_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0ee7e104113c1705f37b6571534572239589b887cb92703475e814e867d00c4 +size 32306 diff --git a/detail_png/Shaft_02976_diam.png b/detail_png/Shaft_02976_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2c0f297a9572090d3d9d5904d863e1bfe642ee53 --- /dev/null +++ b/detail_png/Shaft_02976_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73cb0eba692e6c6e77d0aa3e8e9bd406b96a0bdc8a4ed49510ab69766a367747 +size 24096 diff --git a/detail_png/Shaft_02976_length.png b/detail_png/Shaft_02976_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b7dc140b96f7684dd5339365fe717c421186b7b --- /dev/null +++ b/detail_png/Shaft_02976_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56f8c2db9d50069653219df0b59c03abdba2b051167f36afa05fa1fab2441056 +size 20572 diff --git a/detail_png/Shaft_02976_title.png b/detail_png/Shaft_02976_title.png new file mode 100644 index 0000000000000000000000000000000000000000..250522c03199d4faff135d883260b6ed7097da02 --- /dev/null +++ b/detail_png/Shaft_02976_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7650943cb47bb032768df5982a281583ed0a0be5b791f7a3a5a531952e78722f +size 22245 diff --git a/detail_png/Shaft_02978_diam.png b/detail_png/Shaft_02978_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b13a6f0c662934e3104023058c98df46f813d9f3 --- /dev/null +++ b/detail_png/Shaft_02978_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fb32927e2c78666ea8df07c92a553d4d65be682ed6d874882010a12d030a608 +size 20492 diff --git a/detail_png/Shaft_02978_length.png b/detail_png/Shaft_02978_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1f0ed36609a66b304b9c07550ef3ae20ac5e2ff9 --- /dev/null +++ b/detail_png/Shaft_02978_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6c6859f94db235e25dd636d49008c23166b9ce7acad47753e4184a9a18847f9 +size 14984 diff --git a/detail_png/Shaft_02978_title.png b/detail_png/Shaft_02978_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f3e9229da61abca60ee2a930acd217c6ef4e2d60 --- /dev/null +++ b/detail_png/Shaft_02978_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61441078145c0fb46e570d3b2fc0d59744788fbc11b3ce962e6200102fa96e61 +size 18749 diff --git a/detail_png/Shaft_02980_diam.png b/detail_png/Shaft_02980_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7c35535dafddaeeeaf3ad969d1c92e79a6a4de00 --- /dev/null +++ b/detail_png/Shaft_02980_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3a11ea7b3acad63791e2e2e920721b8d3f7074f39249d2554990f642241a997 +size 25390 diff --git a/detail_png/Shaft_02980_length.png b/detail_png/Shaft_02980_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d31e3db85612055448b87e66fc99e11edad85f3e --- /dev/null +++ b/detail_png/Shaft_02980_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb1ea54c30a369232255b060241ccbc598a626b8eb8978e2aaf7dfcca9a2ba6a +size 35403 diff --git a/detail_png/Shaft_02980_title.png b/detail_png/Shaft_02980_title.png new file mode 100644 index 0000000000000000000000000000000000000000..218355aa786dee244321c0d7c24c6477f7248daf --- /dev/null +++ b/detail_png/Shaft_02980_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38a6704d7e239732f6be4041faabaee8884430a70ed70d4ce15583c384f39da0 +size 33659 diff --git a/detail_png/Shaft_02985_diam.png b/detail_png/Shaft_02985_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..19e47364a90e1ff36ba834987240429a6059042e --- /dev/null +++ b/detail_png/Shaft_02985_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc3c1b2aa5c5c90cba28d9b805942dcc4d073fbe9a08467473f840dae4486292 +size 24881 diff --git a/detail_png/Shaft_02985_length.png b/detail_png/Shaft_02985_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e87fec2db8fee5589e33e16712ae684f5a79f9e1 --- /dev/null +++ b/detail_png/Shaft_02985_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d34103fe0af0b4a554eeb0efd42d68a53355e761da4feb956160cdd88b29f33 +size 23119 diff --git a/detail_png/Shaft_02985_title.png b/detail_png/Shaft_02985_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9439e8774e5afb0d2748bb5dc3c7e647defb9c85 --- /dev/null +++ b/detail_png/Shaft_02985_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:583fe03bf7c52a96182dfbbd87e32fb4f0a4592b0290e7226d5062f56082a8f1 +size 33237 diff --git a/detail_png/Shaft_02986_diam.png b/detail_png/Shaft_02986_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d6f72fe80360d4f13d18cd973957e00ade68f836 --- /dev/null +++ b/detail_png/Shaft_02986_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bad8bfa320efb11cb253a96a757b50a8a5400f326c723d395dfde21b4e0cc8c2 +size 20705 diff --git a/detail_png/Shaft_02986_length.png b/detail_png/Shaft_02986_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b98f139a207e6536411e1d0535d2cbe3bdb95f9b --- /dev/null +++ b/detail_png/Shaft_02986_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba7d0ba69bb8468e1f8b0912617e9ded45cfb8961b1d58c8412139aa33cce792 +size 16827 diff --git a/detail_png/Shaft_02986_title.png b/detail_png/Shaft_02986_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9aeea75420b470473d8bf1839f333af345cce374 --- /dev/null +++ b/detail_png/Shaft_02986_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cbbf878bc403764202a0dfaa6f21fe2b4d2e30a13ff4aa7d7a28af5a2206003 +size 21251 diff --git a/detail_png/Shaft_02987_diam.png b/detail_png/Shaft_02987_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..18d2e14a2ca5adec8af7f2935838ac321e18fddb --- /dev/null +++ b/detail_png/Shaft_02987_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa39f2b5959433c325c1c867e45f4b9ed43330ed6befc76998cc5c4cb5cf277c +size 24301 diff --git a/detail_png/Shaft_02987_length.png b/detail_png/Shaft_02987_length.png new file mode 100644 index 0000000000000000000000000000000000000000..72f50d269bf406d48f20fe856ad628d5b8398ffd --- /dev/null +++ b/detail_png/Shaft_02987_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f76cf50201e89e75e243eca26185fcfa088fef89058afd1e172ee6268873a115 +size 19197 diff --git a/detail_png/Shaft_02987_title.png b/detail_png/Shaft_02987_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dd7d6cb2366fe519ba4b315d34cd9fc525fb4684 --- /dev/null +++ b/detail_png/Shaft_02987_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:352421a6572f3fc2cd32871410c43936c3e6bdb46bc2218674998014d9231fc7 +size 23428 diff --git a/detail_png/Shaft_02988_diam.png b/detail_png/Shaft_02988_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3de5b32d248f761b7495b151751efab01c4d3277 --- /dev/null +++ b/detail_png/Shaft_02988_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84974eee628e74e838300cab4c317c4d9734bcb48fb6f8f2deb29818681e7d95 +size 19556 diff --git a/detail_png/Shaft_02988_length.png b/detail_png/Shaft_02988_length.png new file mode 100644 index 0000000000000000000000000000000000000000..51d3edc76b66c26682980922e9fbab75201d65f9 --- /dev/null +++ b/detail_png/Shaft_02988_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72e813c1009e4ee8ce91827496023e350debc9cb795366904df68f95dfb0ecca +size 18651 diff --git a/detail_png/Shaft_02988_title.png b/detail_png/Shaft_02988_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e5bdcd8401efd60487c152c70b1eea03f7144509 --- /dev/null +++ b/detail_png/Shaft_02988_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1793e56aad6895322d6b05ee795df9be8456e82871d872c9cfc7e52a4f10dada +size 18691 diff --git a/detail_png/Shaft_02989_diam.png b/detail_png/Shaft_02989_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e3cee65537be43e627b161a7c9561df5cce9ca84 --- /dev/null +++ b/detail_png/Shaft_02989_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f4dc2a2330268306b4b009dc05b9ef5a404b303a3cf2853b4b64e0ec67fe881 +size 19749 diff --git a/detail_png/Shaft_02989_length.png b/detail_png/Shaft_02989_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f767a225ee7005b3684435001eef0e0e59d10197 --- /dev/null +++ b/detail_png/Shaft_02989_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbd0cb2ad7a9e3bcc12693c87812c9933a1d6118dc8cd9b10b7e3265873944b2 +size 15252 diff --git a/detail_png/Shaft_02989_title.png b/detail_png/Shaft_02989_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6eea581b71bbc5695cda3f714cad8f08090a3f53 --- /dev/null +++ b/detail_png/Shaft_02989_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e07e11f9973ab7522f465e6ffb54683334bb7bc942c60da5aa84d4b169787ee7 +size 25819 diff --git a/detail_png/Shaft_02990_diam.png b/detail_png/Shaft_02990_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d5fc34831e4ffcf45bd0a3a9e4e5619de4f8ede1 --- /dev/null +++ b/detail_png/Shaft_02990_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:986993fffecc55b4e10d2d50520a46d54fc6ea6e4f951e493b592c7c24a9cc99 +size 20417 diff --git a/detail_png/Shaft_02990_length.png b/detail_png/Shaft_02990_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2ce0d0fc1f8f27740e4d1e075449f9cb05c9aa62 --- /dev/null +++ b/detail_png/Shaft_02990_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a78aa35c97e5cf568be103d9234543abe63874e0c2439469167f1fd80c8b48b8 +size 15969 diff --git a/detail_png/Shaft_02990_title.png b/detail_png/Shaft_02990_title.png new file mode 100644 index 0000000000000000000000000000000000000000..21ae42384b32707cea8255eebd81a3bc772ae15a --- /dev/null +++ b/detail_png/Shaft_02990_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28e384cae8e2a8ffc9b2cba04ff2c5d76164f55fc22301d656cc7892770296f8 +size 15446 diff --git a/detail_png/Shaft_02998_diam.png b/detail_png/Shaft_02998_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..26c68b38f4ea424fd8c2b52f2e150d0f2c8fd2f8 --- /dev/null +++ b/detail_png/Shaft_02998_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:033277127f1895d2a212cf905e3d5b7d5191e9371c406b678126f85b65fcbf2b +size 20023 diff --git a/detail_png/Shaft_02998_length.png b/detail_png/Shaft_02998_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13fd163c6dab98027acde4756a8b567aa41040c8 --- /dev/null +++ b/detail_png/Shaft_02998_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ded5884ab78e2fd9681ba3f966d33ac4a5d45fe8444f03a917818ef9ff1cf042 +size 16377 diff --git a/detail_png/Shaft_02998_title.png b/detail_png/Shaft_02998_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7a15b7177ade46ba5e144746bdf99a5f337ea259 --- /dev/null +++ b/detail_png/Shaft_02998_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba33977757343f836874f32043c81f13b837ade2f1d90cf87675f27fd3ed760f +size 14854 diff --git a/detail_png/Shaft_03003_diam.png b/detail_png/Shaft_03003_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a827967b49e056b9d3b932878af8b5a99b0ea5df --- /dev/null +++ b/detail_png/Shaft_03003_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:149795539d22a44653a6a1b29196b449e10a8da2332fd1cd24895f5e068fe8aa +size 32718 diff --git a/detail_png/Shaft_03003_length.png b/detail_png/Shaft_03003_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3e1d66c8ac0864c1c54fc610af92219624cdcb09 --- /dev/null +++ b/detail_png/Shaft_03003_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:833f294cfa6e434e5a69280bfaa92e0ffec6d944e5f46c13229d7a87ba3fb896 +size 38996 diff --git a/detail_png/Shaft_03003_title.png b/detail_png/Shaft_03003_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3344c2cfb7882d5722afa75a1ac4927490d33dff --- /dev/null +++ b/detail_png/Shaft_03003_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40c79e4d499e669bf448901d2c047bbe6c2c38695e64ace91a78400ad926c71f +size 30875 diff --git a/detail_png/Shaft_03004_diam.png b/detail_png/Shaft_03004_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..281f44b43944e7aab0f031e494bb25eafc18cc1c --- /dev/null +++ b/detail_png/Shaft_03004_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afcb74107111bc5e02166d2675c09a30b5902f109f54ebca3027e900213f8557 +size 36990 diff --git a/detail_png/Shaft_03004_length.png b/detail_png/Shaft_03004_length.png new file mode 100644 index 0000000000000000000000000000000000000000..406a0aade1962eb1a90d3b0a04cfdb7c7dcf64cb --- /dev/null +++ b/detail_png/Shaft_03004_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e540c8695e37a5181fe973a89ec40dade5c61e068f7bf60e009f1eb067b54e95 +size 36151 diff --git a/detail_png/Shaft_03004_title.png b/detail_png/Shaft_03004_title.png new file mode 100644 index 0000000000000000000000000000000000000000..79ac88d3028edebe01379938cd3f6975776074bd --- /dev/null +++ b/detail_png/Shaft_03004_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f466093dba23fc8a798f7b0f2808ee59a3d313f2920b1ee50a6982a99bf55095 +size 32009 diff --git a/detail_png/Shaft_03006_diam.png b/detail_png/Shaft_03006_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a156cccef6428477835955ae06f527fefa66576 --- /dev/null +++ b/detail_png/Shaft_03006_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38951a8c0f45ca5f99328604f49ee6257424efe5455f916eef3baad6eb61870f +size 25095 diff --git a/detail_png/Shaft_03006_length.png b/detail_png/Shaft_03006_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f31d2af122b5ea858d1526bc8deae07c1bab6c34 --- /dev/null +++ b/detail_png/Shaft_03006_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a26682ac13c0a9bafd5747ed7539b5a1bc6ebe401c299a1daa354e38f6ffd858 +size 34994 diff --git a/detail_png/Shaft_03006_title.png b/detail_png/Shaft_03006_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4b2c704f301e574842512deb6fed3d3edc62d5a4 --- /dev/null +++ b/detail_png/Shaft_03006_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e41979724835646f86e31377fa45d07dfda35ba563294d09b5745e42993a5a9 +size 31182 diff --git a/detail_png/Shaft_03009_diam.png b/detail_png/Shaft_03009_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..57cd5f6ce7ca02a82999f65282f1253299253f74 --- /dev/null +++ b/detail_png/Shaft_03009_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0af9bda8e1ace3f20ec9f71e14133478e13fcdbc7906aadba12340e0cfccf1bb +size 20321 diff --git a/detail_png/Shaft_03009_length.png b/detail_png/Shaft_03009_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e2cbe16941d31a8750611d17c275213c0112f297 --- /dev/null +++ b/detail_png/Shaft_03009_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a13145e2225dab4994eb169ef02a2f33c728d233a7e4d117e036f55ed5d6417 +size 17606 diff --git a/detail_png/Shaft_03009_title.png b/detail_png/Shaft_03009_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e072018eb0aa309794733303aa4437853bf57736 --- /dev/null +++ b/detail_png/Shaft_03009_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f77ae75e465d85df85898beecbc640881d3e9f71964400266734c8153cbcccfa +size 23847 diff --git a/detail_png/Shaft_03010_diam.png b/detail_png/Shaft_03010_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f0ff95283cb563c2dff1a69b162bdab6cb305a57 --- /dev/null +++ b/detail_png/Shaft_03010_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d1f9099e9aa74c7266921c529c6410df0cbc9fe2712d0b7bd4d03a3d10193e0 +size 29928 diff --git a/detail_png/Shaft_03010_length.png b/detail_png/Shaft_03010_length.png new file mode 100644 index 0000000000000000000000000000000000000000..25430396ff3a6ff24f90f1cb05161baba8088d2b --- /dev/null +++ b/detail_png/Shaft_03010_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf730383639fa4e33b045a1ade6f5f69670bb1753567ee78c8d6c4d8155fb145 +size 28703 diff --git a/detail_png/Shaft_03010_title.png b/detail_png/Shaft_03010_title.png new file mode 100644 index 0000000000000000000000000000000000000000..151d006f1d8f6653cd27dacdd44c7b73327f503c --- /dev/null +++ b/detail_png/Shaft_03010_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8757f6f154a2705e7d93c1c8e5447ac1c5c17c60e5810f8a564fa4b204d98f9f +size 31910 diff --git a/detail_png/Shaft_03015_diam.png b/detail_png/Shaft_03015_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8f71523950b1a38e40dedcdb9078a81ed324e25f --- /dev/null +++ b/detail_png/Shaft_03015_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d3552d5275b8e1e000a3a662738c0d92d44e76df22be13fb917f15196bd1ca7 +size 25222 diff --git a/detail_png/Shaft_03015_length.png b/detail_png/Shaft_03015_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dcb4d4bb8a2f12478b81dd1aa963f1730c284c08 --- /dev/null +++ b/detail_png/Shaft_03015_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee55fd4527cbe271f016fe9b7be62f1a463100c3073bc4fa5f7b5faa5216c1e7 +size 25008 diff --git a/detail_png/Shaft_03015_title.png b/detail_png/Shaft_03015_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f78aa594e178d594fb48c6d83bd70116398e6337 --- /dev/null +++ b/detail_png/Shaft_03015_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19b1150d02ea5334abe9746a17366d16f939c4bd59c1867b7be4ac478c3ede4d +size 31917 diff --git a/detail_png/Shaft_03019_diam.png b/detail_png/Shaft_03019_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c2adce0206c210caf47a7fb7886e71597cbfa1a6 --- /dev/null +++ b/detail_png/Shaft_03019_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ebda23f6c88eaaa8d97a2510429b691a2037ed6cebecf90d2d6831879bfd1ea +size 30536 diff --git a/detail_png/Shaft_03019_length.png b/detail_png/Shaft_03019_length.png new file mode 100644 index 0000000000000000000000000000000000000000..257c87f78f11025d191916a63a09f451ba590c4c --- /dev/null +++ b/detail_png/Shaft_03019_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6373b6e213a24273f3a930f20279fcd546192f1572eb70766161b01c26ac45c +size 29077 diff --git a/detail_png/Shaft_03019_title.png b/detail_png/Shaft_03019_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c7fc36b2e161519b7ec8d3c263c6ac90356a945e --- /dev/null +++ b/detail_png/Shaft_03019_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcc701225b544285f14cec57317f98e52ce64046ddf2a0b2622d40e76981cc47 +size 29309 diff --git a/detail_png/Shaft_03021_diam.png b/detail_png/Shaft_03021_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..524de132350a45696ecb904fc69b8aacd5005ffa --- /dev/null +++ b/detail_png/Shaft_03021_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed9b2b40d2fd44a2bc15b7d5dc3f46091523e6016a25a4a65b61843a4976d99e +size 23906 diff --git a/detail_png/Shaft_03021_length.png b/detail_png/Shaft_03021_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0ed6bc6a60884bd77e07f931b824e9fcbe5df18a --- /dev/null +++ b/detail_png/Shaft_03021_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39fb44e44bdd65886fad9e1ac385aece4a0c7973077759ddd808f6b92722d50e +size 18740 diff --git a/detail_png/Shaft_03021_title.png b/detail_png/Shaft_03021_title.png new file mode 100644 index 0000000000000000000000000000000000000000..716a5c3184da2b5632772e0cd057f6d048146c8d --- /dev/null +++ b/detail_png/Shaft_03021_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c206aa4426c4db30cf2172dfd738f47deb5366959aae90a09611d997cc06a9bb +size 15710 diff --git a/detail_png/Shaft_03023_diam.png b/detail_png/Shaft_03023_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f36803751e39f5c20bea919d8dc8e04e1e982170 --- /dev/null +++ b/detail_png/Shaft_03023_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95f61dc2137c79ac55830a5d9c15a59111d543110462b3bd4543407ceb3a57ec +size 27420 diff --git a/detail_png/Shaft_03023_length.png b/detail_png/Shaft_03023_length.png new file mode 100644 index 0000000000000000000000000000000000000000..db98227b211185cc93d39836874817ff4a6cf288 --- /dev/null +++ b/detail_png/Shaft_03023_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b68714bc8393a69114dcbbb2133bdc7bafc173f411511afc85367f63fe404993 +size 35739 diff --git a/detail_png/Shaft_03023_title.png b/detail_png/Shaft_03023_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f809f32073799cfd7570bdde1879cea9836c2f2f --- /dev/null +++ b/detail_png/Shaft_03023_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63af3e9d26dde306a77fd1372e7a0c788b67315b82a5dad5c2d5e684cac6fbba +size 33370 diff --git a/detail_png/Shaft_03024_diam.png b/detail_png/Shaft_03024_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e6c299d976b0be60da620d7bc0dc72198c71077a --- /dev/null +++ b/detail_png/Shaft_03024_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:769d95a0aee96c899d42d09a273841ac3d0c4bfdc9c87ccdd79a890e42b6dc7f +size 19426 diff --git a/detail_png/Shaft_03024_length.png b/detail_png/Shaft_03024_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8855ee08127e36084918da275e860e7b61c3b87c --- /dev/null +++ b/detail_png/Shaft_03024_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e8f51c8d7ef1efcf309ef9045338f63261534c5e3484d32288decd506ed6781 +size 17856 diff --git a/detail_png/Shaft_03024_title.png b/detail_png/Shaft_03024_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5c8dfc1833475df93d4ae3cee11392592deb132e --- /dev/null +++ b/detail_png/Shaft_03024_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b53aa18206c174b2b0fd9c038d797b14502c92241972d9bcad9f00ece7827a10 +size 32112 diff --git a/detail_png/Shaft_03025_diam.png b/detail_png/Shaft_03025_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..42b65118fce4f1d0ac087a6fe357fd175ab97944 --- /dev/null +++ b/detail_png/Shaft_03025_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:032be04f7f9775dc581bf54dd0781c5b70da70f085475e9c33e73c415b1b1ddd +size 32052 diff --git a/detail_png/Shaft_03025_length.png b/detail_png/Shaft_03025_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0139d7c0ba17ee8071bde4cdc508f41771b2817e --- /dev/null +++ b/detail_png/Shaft_03025_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b110566814ed0c60dd1796f1dc683c3d77f322e8dbd6638e526f65e45fbfbdf7 +size 41031 diff --git a/detail_png/Shaft_03025_title.png b/detail_png/Shaft_03025_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ce35932ab270cee5707963c2caab6319a0635cc --- /dev/null +++ b/detail_png/Shaft_03025_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e089089b9c65b9bf3a4bc46934301082bd37ffc6580927d0722fd5dfbb384f2 +size 36223 diff --git a/detail_png/Shaft_03026_diam.png b/detail_png/Shaft_03026_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..23300ba56954a32127411158cfab84bc9453c01c --- /dev/null +++ b/detail_png/Shaft_03026_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8624cabac89124c18c6b3bfcc0c149e4740e3a36a7545aa25cb2400cd452625 +size 19873 diff --git a/detail_png/Shaft_03026_length.png b/detail_png/Shaft_03026_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b8dbfea64a57a71de7454e2801f245a050f5fa3 --- /dev/null +++ b/detail_png/Shaft_03026_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e6e005a7581bce1d622e4f4b989f71b0ea0b74bc27d5372d539119842a8174b +size 17197 diff --git a/detail_png/Shaft_03026_title.png b/detail_png/Shaft_03026_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b623865093fb76dfaeca90e2d181f7acd744fc2b --- /dev/null +++ b/detail_png/Shaft_03026_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d78ac0c1275a15b1799aebdcd1668ba77edee9bad3fce90e902b7b2b9b242ad2 +size 27604 diff --git a/detail_png/Shaft_03030_diam.png b/detail_png/Shaft_03030_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9475bcb6a5962ab2f7ad6b9585c2ddef441cbe49 --- /dev/null +++ b/detail_png/Shaft_03030_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59d61e5d1e733640b34e3010e14f52c47b3343c09ec0255454b9a749556bbde5 +size 36622 diff --git a/detail_png/Shaft_03030_length.png b/detail_png/Shaft_03030_length.png new file mode 100644 index 0000000000000000000000000000000000000000..12a4f3f1f973ae7dd42ab3ba63fa7bad9b91dc90 --- /dev/null +++ b/detail_png/Shaft_03030_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cc95f5114be5eef93e691dea30fdf15a447b2c6c6f1c691bb79230e9d92ab48 +size 44078 diff --git a/detail_png/Shaft_03030_title.png b/detail_png/Shaft_03030_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c87fb6d3f2f2ebff8f0d1b0b0b4e0b4162a7e1e6 --- /dev/null +++ b/detail_png/Shaft_03030_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e51fe434352f14865c4abbfafa8e4eed394cb61ea39216226bffcad65c3b71 +size 33352 diff --git a/detail_png/Shaft_03031_diam.png b/detail_png/Shaft_03031_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..417b7d177f09ebba2426a7b5510c16fe604ae5aa --- /dev/null +++ b/detail_png/Shaft_03031_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f27309436a7954cefd4fde3718c9dd81449e0ef9d8971fefa698eb07ce409808 +size 36541 diff --git a/detail_png/Shaft_03031_length.png b/detail_png/Shaft_03031_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1d8af87d1cd7b29941b15236b1499bee2f7d8ff1 --- /dev/null +++ b/detail_png/Shaft_03031_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58fe839684c61e83021a953d142573e38f47c48da65c7ea76016d221fc655a48 +size 52004 diff --git a/detail_png/Shaft_03031_title.png b/detail_png/Shaft_03031_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a3b5ea3fe46e9ee5ca3b65f314bd6462cb33f565 --- /dev/null +++ b/detail_png/Shaft_03031_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05d9c9e5c4374ee6cd9722081f623270b092e2090f76c94e8c6d259a8ae69cc6 +size 29560 diff --git a/detail_png/Shaft_03032_diam.png b/detail_png/Shaft_03032_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b49de1f59458b416c0b610bf47010e73d5c064e1 --- /dev/null +++ b/detail_png/Shaft_03032_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f18ca161698fd1ad04b94e2e2eb5de567fcc7dc339402ec4301606e6729ee62 +size 36217 diff --git a/detail_png/Shaft_03032_length.png b/detail_png/Shaft_03032_length.png new file mode 100644 index 0000000000000000000000000000000000000000..14b9557f3d1acbad85a8976b4f0aa4edb18664d0 --- /dev/null +++ b/detail_png/Shaft_03032_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4a789a8f259eaca9b1fed6648f6b2a9fc8d9358dea1a4e5f088b5df2b7aef7d +size 44065 diff --git a/detail_png/Shaft_03032_title.png b/detail_png/Shaft_03032_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5d4d7d4e7c83bbced7c16222e1abfce92a9e3a1f --- /dev/null +++ b/detail_png/Shaft_03032_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb86dbb29eb7ca201e745d1fe00d18f93013d4649660cace181660a9a649ec3d +size 36505 diff --git a/detail_png/Shaft_03033_diam.png b/detail_png/Shaft_03033_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2fc884c53c4b1ff3b49fc8c9e9b7e5c6665fced6 --- /dev/null +++ b/detail_png/Shaft_03033_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a855ea78473f0e1d506a90425077bbe0516cea553f7739b916de11ca9f5b6ebb +size 20592 diff --git a/detail_png/Shaft_03033_length.png b/detail_png/Shaft_03033_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c0e4c5cb546adb47419b55c3b233f7827e64cf63 --- /dev/null +++ b/detail_png/Shaft_03033_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c3f9810f373243ea9172251284b9804894ceb512d6a9b5aee167c704d6763c7 +size 15700 diff --git a/detail_png/Shaft_03033_title.png b/detail_png/Shaft_03033_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0f54e3324002f220bf7d21e7d0db4be224addc04 --- /dev/null +++ b/detail_png/Shaft_03033_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6914b22e885b68bc1f6be3f8ed99a51dcbe85caf3b39f08fe268329ed02a454d +size 21448 diff --git a/detail_png/Shaft_03036_diam.png b/detail_png/Shaft_03036_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..88f85846588e7e0f0ac971626f573eefdd0819b0 --- /dev/null +++ b/detail_png/Shaft_03036_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:512196030793587b5b8af385e640122b081a0a42888bb23d8c0d5bf0ad640d92 +size 18677 diff --git a/detail_png/Shaft_03036_length.png b/detail_png/Shaft_03036_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4bc2ade2c5c719b00b282f54b72e5157306fd60d --- /dev/null +++ b/detail_png/Shaft_03036_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5a0d0c99737cf0d6a91cad1a766d131c35f5a35bf090d4bd81a64394d9f72a1 +size 22115 diff --git a/detail_png/Shaft_03036_title.png b/detail_png/Shaft_03036_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5fbe918d42fb2e50fc96797bae84a532b5738ae1 --- /dev/null +++ b/detail_png/Shaft_03036_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5325c64962bf7ba1ce6cb081a1c7e6fc2eb499ec107b1c77214b7ab78adc2d66 +size 33171 diff --git a/detail_png/Shaft_03039_diam.png b/detail_png/Shaft_03039_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..860e9e96cbc93ed4e2c2e60c9673e75279ad9989 --- /dev/null +++ b/detail_png/Shaft_03039_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4ef3d73b8709f9eee470c363b015b51bd93d1410d53f2527f2c0fd0f1c73e57 +size 26174 diff --git a/detail_png/Shaft_03039_length.png b/detail_png/Shaft_03039_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7490fe8886273f428ccc5282e1e12fe6eb1e236 --- /dev/null +++ b/detail_png/Shaft_03039_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:603339065d995128d1b6435268cf2bbd5155392ec1166f2c3c79c3de713a3ea0 +size 28452 diff --git a/detail_png/Shaft_03039_title.png b/detail_png/Shaft_03039_title.png new file mode 100644 index 0000000000000000000000000000000000000000..daecabf63936671b06f2106d855898956ce42c40 --- /dev/null +++ b/detail_png/Shaft_03039_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce7bbb5bbb41e0aaaa408164d78a7f56c27e871889a0d13de00c91ff1c0a5810 +size 36419 diff --git a/detail_png/Shaft_03042_diam.png b/detail_png/Shaft_03042_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..abf9313fe9a94364df0051485d552249cd987b89 --- /dev/null +++ b/detail_png/Shaft_03042_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f72b3cc1880d734929a2234118ba036a09ab53adfd8188715146597ed14e5c1b +size 29468 diff --git a/detail_png/Shaft_03042_length.png b/detail_png/Shaft_03042_length.png new file mode 100644 index 0000000000000000000000000000000000000000..528d2ad64d6cd87e309f063f2a6bfe6c886fea62 --- /dev/null +++ b/detail_png/Shaft_03042_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d70635f72aae012c6af1c209a1080d2f7bc8dbcbc927ea0473e7b8a28f67b1d3 +size 41265 diff --git a/detail_png/Shaft_03042_title.png b/detail_png/Shaft_03042_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fd67dc10eec34785c76ac65b9e6797d0b59fd291 --- /dev/null +++ b/detail_png/Shaft_03042_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca3b88d06cc5d98a2d6d795786f1e84ae36c28466d5695e71d00490666b8e33e +size 32915 diff --git a/detail_png/Shaft_03043_diam.png b/detail_png/Shaft_03043_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..78a317a88f17a8c10eec0eeb5cf802b2c85ce2ba --- /dev/null +++ b/detail_png/Shaft_03043_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a74a464333b1fbc2cd074ba262815d4a5cba3759b3f61ba3081fbdda9a20a559 +size 36759 diff --git a/detail_png/Shaft_03043_length.png b/detail_png/Shaft_03043_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1bc42667c7d3e45230b2886a4aadf65c9a650f4 --- /dev/null +++ b/detail_png/Shaft_03043_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38f71c99c318e320356ba569da0da6ce52afc746dec629fe9a6fdc639d2547d9 +size 51302 diff --git a/detail_png/Shaft_03043_title.png b/detail_png/Shaft_03043_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5d7e698daf0d8e601dcc893e8013ed1fcd986e56 --- /dev/null +++ b/detail_png/Shaft_03043_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9552edeab080fcabe2ce93ad310ea3dbaa1f2b91d3f116e6599d455eae208c70 +size 33244 diff --git a/detail_png/Shaft_03044_diam.png b/detail_png/Shaft_03044_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b5cc3a6184288b1687e3ca11521e8a8e7b7098e9 --- /dev/null +++ b/detail_png/Shaft_03044_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:136d10fa793347648dbe57b644c20d6d2f72ba667efd32f0b1d9729fcb086d3e +size 20364 diff --git a/detail_png/Shaft_03044_length.png b/detail_png/Shaft_03044_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6d6b369abc89fe7db850f1a15c9915248db440ca --- /dev/null +++ b/detail_png/Shaft_03044_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:613cc6f1cb6491dc9d27bfb1093d9b268ecd33b594e02c47ca078da53fdddab8 +size 15561 diff --git a/detail_png/Shaft_03044_title.png b/detail_png/Shaft_03044_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2b98f1510e47c0d3356fd05286feb15e604bedc4 --- /dev/null +++ b/detail_png/Shaft_03044_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b12f34bb2b9a19788b17d55026fd7362cb701df84552d730eb130b5be28b12e5 +size 16472 diff --git a/detail_png/Shaft_03045_diam.png b/detail_png/Shaft_03045_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a9447a04968bdf150829b88ddf92816c71895a2 --- /dev/null +++ b/detail_png/Shaft_03045_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17785f888cf265ad6dda125f77368eab11b725adbee94916bef4a91ee79e41d2 +size 31387 diff --git a/detail_png/Shaft_03045_length.png b/detail_png/Shaft_03045_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b4b359e92e43530ed55658c5b28c87abaaf4da2c --- /dev/null +++ b/detail_png/Shaft_03045_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d1ae2dc378ae397a06c904875b940cd869038365e7b4ca6375e8683f437b4c0 +size 39865 diff --git a/detail_png/Shaft_03045_title.png b/detail_png/Shaft_03045_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0fd3ff20de6953a912c5e7c154d28db8f81574ac --- /dev/null +++ b/detail_png/Shaft_03045_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c3e7d344a74b63db4a4947c9d5529dd1eaf708ce8eb35dbf6fc992600678a15 +size 30357 diff --git a/detail_png/Shaft_03046_diam.png b/detail_png/Shaft_03046_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c4a205989cd85b69889ff899898a9ff23367c11 --- /dev/null +++ b/detail_png/Shaft_03046_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3644fe223e38ac6d954ce29bf0576f375c112e76955c2380341e7b22cf167108 +size 25791 diff --git a/detail_png/Shaft_03046_length.png b/detail_png/Shaft_03046_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5a1defffd30bd3979323859b0ea956bb2e39e61a --- /dev/null +++ b/detail_png/Shaft_03046_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6e5866c4aa52cb1ed98a593cbbf8108b4883da41612c9c8eb81754062743768 +size 32438 diff --git a/detail_png/Shaft_03046_title.png b/detail_png/Shaft_03046_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c921928ddf8b3f905217c20a47d99877c31feb25 --- /dev/null +++ b/detail_png/Shaft_03046_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85959e8c4006b56a22bbaee2f87583965aee4260b44cec8c49675b77939c0199 +size 35964 diff --git a/detail_png/Shaft_03052_diam.png b/detail_png/Shaft_03052_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a745586a8c1129b6755251940bb2069ee5e5750a --- /dev/null +++ b/detail_png/Shaft_03052_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d24649084915c495781647df56a623a129ac11776158024a593b52d9575a4b9c +size 24706 diff --git a/detail_png/Shaft_03052_length.png b/detail_png/Shaft_03052_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9c2cb179d4066d05cfa417a6483aa033c744d5cb --- /dev/null +++ b/detail_png/Shaft_03052_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdd9b9b16448799edfc02f11a04cb2bca67aa71294a4549d9d8f4afbc6f9d406 +size 20708 diff --git a/detail_png/Shaft_03052_title.png b/detail_png/Shaft_03052_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eb9768fae38a7128de39ec0e816391358e6563ff --- /dev/null +++ b/detail_png/Shaft_03052_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:619070a7b61f0b776e76c5bad779f1c91058913378d1027e33f1cba96150ecd6 +size 21024 diff --git a/detail_png/Shaft_03054_diam.png b/detail_png/Shaft_03054_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f0eea9b824fbd4e1b2112bc6f42b50afee8c51af --- /dev/null +++ b/detail_png/Shaft_03054_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b112f14f2b299c8a05b3642aeefc4a4b726e016f60a3becd530df9f9d10fb23 +size 30732 diff --git a/detail_png/Shaft_03054_length.png b/detail_png/Shaft_03054_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3ad316a0af806a397edf4f37b7dd67fe0d439a4e --- /dev/null +++ b/detail_png/Shaft_03054_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79f18c55ddde55aaabc09e1aad7ebc8b8a73cc2c8ce82aaaa9f973688d05d278 +size 45230 diff --git a/detail_png/Shaft_03054_title.png b/detail_png/Shaft_03054_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e810f2f78c7112100418c718bf6016bc249b186d --- /dev/null +++ b/detail_png/Shaft_03054_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ad9bfc86ec1577956dc11c98beeb39dde103ef6f92cadfe7fd70b9afaae6c5d +size 30716 diff --git a/detail_png/Shaft_03058_diam.png b/detail_png/Shaft_03058_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1db3432a6b9f005db60f54f8222932786ac0056c --- /dev/null +++ b/detail_png/Shaft_03058_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:073ec085ff388bf66773f12f319a1c4cddf662c861792e2b0fafe38734a9b5a7 +size 19134 diff --git a/detail_png/Shaft_03058_length.png b/detail_png/Shaft_03058_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9e0f090bba501f136a17bd10618a0e7065b8dcd2 --- /dev/null +++ b/detail_png/Shaft_03058_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:184134d8f7b40281311c451423e9ef6ece3a857f5447d198dae3562fe449b218 +size 20798 diff --git a/detail_png/Shaft_03058_title.png b/detail_png/Shaft_03058_title.png new file mode 100644 index 0000000000000000000000000000000000000000..25a66c0ddd62d9c9a73f59e97d13a05530861555 --- /dev/null +++ b/detail_png/Shaft_03058_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7a38dad437f561e4fda90f9320d972ab95e7fbc6c29522fc1edb5e3ac3c36d0 +size 31928 diff --git a/detail_png/Shaft_03060_diam.png b/detail_png/Shaft_03060_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a3fc9495ffbd7af254b5f0209f0ee4660308faed --- /dev/null +++ b/detail_png/Shaft_03060_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b14e34bd0aeafa14fa4a2e98967e924e48dabd376218c5ba6050a12f95522a0 +size 24969 diff --git a/detail_png/Shaft_03060_length.png b/detail_png/Shaft_03060_length.png new file mode 100644 index 0000000000000000000000000000000000000000..814b8355d180e0692bb8c2338ff5873fc1b4d0d3 --- /dev/null +++ b/detail_png/Shaft_03060_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d9bcce8f581b5ace3884f5dcece7648b1f1660cb8693ac44ffccaee7aae23c6 +size 25966 diff --git a/detail_png/Shaft_03060_title.png b/detail_png/Shaft_03060_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8a1d1ec8e673e72b5426ccd2427bd84e58bd2663 --- /dev/null +++ b/detail_png/Shaft_03060_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e4e27c0a28614a47054f8b44380bef66e45b847ec4e3f996a66b22b340c6026 +size 36368 diff --git a/detail_png/Shaft_03061_diam.png b/detail_png/Shaft_03061_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8323bd822ed83c4cdf3592c5827bf5dbb329bb07 --- /dev/null +++ b/detail_png/Shaft_03061_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:585cefc9395eb0f370d8396b02e2d651c80f4c94ab90ff6050bbb89ccca09df2 +size 19956 diff --git a/detail_png/Shaft_03061_length.png b/detail_png/Shaft_03061_length.png new file mode 100644 index 0000000000000000000000000000000000000000..15b16faf6c3fa1aa64e5fc4cd0ff095ae5d18112 --- /dev/null +++ b/detail_png/Shaft_03061_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcf57a17ca683d980e4c2f725f78e0c475e35338ea82212f7da82052c5c42fdb +size 26418 diff --git a/detail_png/Shaft_03061_title.png b/detail_png/Shaft_03061_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a0bde91b9e7d0e6601fcb854e79f23b5762c4174 --- /dev/null +++ b/detail_png/Shaft_03061_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a92f5203920a45ccf8bc1f44c9eb8275aeba340fdabdacc6aa9cfdf15883da14 +size 30346 diff --git a/detail_png/Shaft_03062_diam.png b/detail_png/Shaft_03062_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..325931e8b7d3fc943d207172f93525ae0a31e3c1 --- /dev/null +++ b/detail_png/Shaft_03062_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4716048ef489f162b64d422faf16a7d3ed4fdeedc7b5cd14bc4cb12352d5aa60 +size 39221 diff --git a/detail_png/Shaft_03062_length.png b/detail_png/Shaft_03062_length.png new file mode 100644 index 0000000000000000000000000000000000000000..853073fec7bcec52443f7826ae3d7b76b0d33290 --- /dev/null +++ b/detail_png/Shaft_03062_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b093741854c38227f430ee6cdaa8a6604a5d1795e8cd5b806730823686c3d0a +size 55384 diff --git a/detail_png/Shaft_03062_title.png b/detail_png/Shaft_03062_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e3750014524a1e50d1bad22f49a03546b625d28f --- /dev/null +++ b/detail_png/Shaft_03062_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8775f120a8c6745e96e555de1709581d3f0f01c1582994e42d99d2a3333686cd +size 37659 diff --git a/detail_png/Shaft_03065_diam.png b/detail_png/Shaft_03065_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..87de432c8cb7382e180d9127c03ca44a36623593 --- /dev/null +++ b/detail_png/Shaft_03065_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87774fe93ca36c5a78a3f20040b3bb62572a08a79594971a62fd3855249e0e28 +size 28484 diff --git a/detail_png/Shaft_03065_length.png b/detail_png/Shaft_03065_length.png new file mode 100644 index 0000000000000000000000000000000000000000..772d437361e293136a8a4abc7ebf22548784c37d --- /dev/null +++ b/detail_png/Shaft_03065_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2923c9faf5711e460a9c5218e883e3e2f0a8027db67156ad88daaf89c6d19ed +size 31109 diff --git a/detail_png/Shaft_03065_title.png b/detail_png/Shaft_03065_title.png new file mode 100644 index 0000000000000000000000000000000000000000..020730d15a6788312eb15dee582d907c8b2822af --- /dev/null +++ b/detail_png/Shaft_03065_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8ee9d0f9dc30e82a82f69b6d7456604ae8914c75965a0f185b1418c2e8268de +size 31000 diff --git a/detail_png/Shaft_03079_diam.png b/detail_png/Shaft_03079_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7c5ac4dac6cb7dc58729afefdbbf054c497c6e96 --- /dev/null +++ b/detail_png/Shaft_03079_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34cb89db492090aba2d3df84f5311bd943a96e66d1e8c4de88d0e3f122522097 +size 20041 diff --git a/detail_png/Shaft_03079_length.png b/detail_png/Shaft_03079_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c2cfb53600271a3c2a313e1d3ceb6baddfbfb854 --- /dev/null +++ b/detail_png/Shaft_03079_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9b20841ee7df8d6fdb7f468e5aaa4f041c3333efd531a415bbdffbe918a09c3 +size 16689 diff --git a/detail_png/Shaft_03079_title.png b/detail_png/Shaft_03079_title.png new file mode 100644 index 0000000000000000000000000000000000000000..477e7db15eb693a2ce861d8e1e007837477eecbd --- /dev/null +++ b/detail_png/Shaft_03079_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9625665fce9d359944c55dcbcae73e791e9756fca5f743e09521e11932204942 +size 18708 diff --git a/detail_png/Shaft_03087_diam.png b/detail_png/Shaft_03087_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6626113c31bbd396d93d7a3ed02dee4cb1c2c149 --- /dev/null +++ b/detail_png/Shaft_03087_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30ba7280a5b8862d052211709d576b75c1965b5a6fb7e87f8b1ec7e01bbe3471 +size 35667 diff --git a/detail_png/Shaft_03087_length.png b/detail_png/Shaft_03087_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4c09c11af785f2a45491df95cf3cf1e5bcfb73dd --- /dev/null +++ b/detail_png/Shaft_03087_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18a326aa9ddeb51a86b5a1c9efe33cf2bd4ee5a2f198e1bbf5316dea694fb45d +size 33557 diff --git a/detail_png/Shaft_03087_title.png b/detail_png/Shaft_03087_title.png new file mode 100644 index 0000000000000000000000000000000000000000..085aeff25588bb032ac134ad2878a096966418ab --- /dev/null +++ b/detail_png/Shaft_03087_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92bd42da8ae786beb7b825b3668059b92f4e6687dc0bb4de0d48e84873b7529f +size 32664 diff --git a/detail_png/Shaft_03089_diam.png b/detail_png/Shaft_03089_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8b23e75e3030527dd98cacf49f06e82e6321b3f2 --- /dev/null +++ b/detail_png/Shaft_03089_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c2418bdbb408628b32e8dd7eb192c1b0528a9e8b60764c5bdd98049677d1425 +size 19893 diff --git a/detail_png/Shaft_03089_length.png b/detail_png/Shaft_03089_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c4a735b1fce49ef2e3be755961ee26e28f72b9a3 --- /dev/null +++ b/detail_png/Shaft_03089_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1aef1f16d42d12c192c48b1cf1a17e20d3fb3c355e121074e60b70a2e9ee5fbc +size 16272 diff --git a/detail_png/Shaft_03089_title.png b/detail_png/Shaft_03089_title.png new file mode 100644 index 0000000000000000000000000000000000000000..910a3f533c643f341b2b6a233864d56713461217 --- /dev/null +++ b/detail_png/Shaft_03089_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b5fc715bcbde8b9dd6692d4ff0270a78bcd56607d534fa8c124cb0c11862052 +size 15946 diff --git a/detail_png/Shaft_03093_diam.png b/detail_png/Shaft_03093_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6fdaee29207f2f96d6e9e3961dc859a59f3e5dcc --- /dev/null +++ b/detail_png/Shaft_03093_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5de4dca15a8e4b8e8bb1e0d73153c304da62f84301907a205b33592145653b0 +size 20174 diff --git a/detail_png/Shaft_03093_length.png b/detail_png/Shaft_03093_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3374cf3fd1b5be8fee44a688e83957c4e20902ae --- /dev/null +++ b/detail_png/Shaft_03093_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3172a87728afec4e7c0391ac383478452adec2641c9700dc78fe8e7f88d8396e +size 18247 diff --git a/detail_png/Shaft_03093_title.png b/detail_png/Shaft_03093_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ad7234f154e80deab3b328c31d21e2f2c4496a7a --- /dev/null +++ b/detail_png/Shaft_03093_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adc17a6b491d9869c773d7453daa9b544867d2d9a0e28d78ed2663e96c7f5b77 +size 32981 diff --git a/detail_png/Shaft_03100_diam.png b/detail_png/Shaft_03100_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5c24c56d2e6594dd7152a709140ed786a05ba41b --- /dev/null +++ b/detail_png/Shaft_03100_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ffefa2e5a7f2cb75f735820f91a66ae7ef6949749969ddd0c3d889f225aed32 +size 25615 diff --git a/detail_png/Shaft_03100_length.png b/detail_png/Shaft_03100_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f380c22f9cc2f48a479d0e25220e16eae1c36fcc --- /dev/null +++ b/detail_png/Shaft_03100_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e6d055e54660857e93dffb78907b0e3bd9c1c06fd6576e2019070a164f8352a +size 32240 diff --git a/detail_png/Shaft_03100_title.png b/detail_png/Shaft_03100_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ffb15b5a8316019ccc9f02a8def9d4401cfaf74a --- /dev/null +++ b/detail_png/Shaft_03100_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33dbab1096f8ef1322b14f5b48209240e87790eb2669cdba909bb59e5b0b48d4 +size 31928 diff --git a/detail_png/Shaft_03103_diam.png b/detail_png/Shaft_03103_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ff62a0eeb4d161838095186764b73112845cd33f --- /dev/null +++ b/detail_png/Shaft_03103_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e516a095ed23b6787ccf420d4630a9609ef1f27a3ed4a5b08d99b8a0734e5f +size 38759 diff --git a/detail_png/Shaft_03103_length.png b/detail_png/Shaft_03103_length.png new file mode 100644 index 0000000000000000000000000000000000000000..da87cb5c3e0614a3f355abf33b92aabb1066e7bc --- /dev/null +++ b/detail_png/Shaft_03103_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:128b8d68f6f8667b98c4e26b1da3777961767dddcbe8b6f95b813c41d3bf6b03 +size 33021 diff --git a/detail_png/Shaft_03103_title.png b/detail_png/Shaft_03103_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7da6b9a914f5f92b36ba02df5555e8f56f7a9db3 --- /dev/null +++ b/detail_png/Shaft_03103_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96f3b3f190d9405d37ae0fb2ccd448d4486154a47f16b72ae4e8106b1add0e4e +size 28836 diff --git a/detail_png/Shaft_03107_diam.png b/detail_png/Shaft_03107_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8a428f11446494b0f7e2e0639e8a0fd04bc3d436 --- /dev/null +++ b/detail_png/Shaft_03107_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70e926b0fbc49bdd261646f19df72d0ae6424a642c2ce7d9b5a6664e2a14a102 +size 29818 diff --git a/detail_png/Shaft_03107_length.png b/detail_png/Shaft_03107_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6deea988ed4c197cf9bbb8f146d5800c93bb1ca0 --- /dev/null +++ b/detail_png/Shaft_03107_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28d4a845c40339e52f2c5148b088deb1a80aecd32774af4a10db8c7a513f34ea +size 26405 diff --git a/detail_png/Shaft_03107_title.png b/detail_png/Shaft_03107_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c189d7242ed505faef58c4809e6e5c8ff0d90c8 --- /dev/null +++ b/detail_png/Shaft_03107_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7937d624b0b7010fdcfb4c4a5707cc16e5ca73d692e22bcd89bc13615e6fff4 +size 24207 diff --git a/detail_png/Shaft_03115_diam.png b/detail_png/Shaft_03115_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1104a5138e68c0b568f851834af7369e94ea9f91 --- /dev/null +++ b/detail_png/Shaft_03115_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ece830abadc778c21fd5e588d0c2caf6fe76e4e24880eaeac14558f1224e382 +size 26323 diff --git a/detail_png/Shaft_03115_length.png b/detail_png/Shaft_03115_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fdca176c7a867bb00af19d094bfc5463fd364aa7 --- /dev/null +++ b/detail_png/Shaft_03115_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f90f0c668c8afc9a5d1ba0c79fe00397d0d00eb457a9089fe5d84fafb0c9214 +size 23878 diff --git a/detail_png/Shaft_03115_title.png b/detail_png/Shaft_03115_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4355f5d70f8c4aadbeca034a04d4eb4f8ea944b7 --- /dev/null +++ b/detail_png/Shaft_03115_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a3cfca7adb3b03b9b4659d20f50c4c884d2d6d5c29dfb6eb3feb98a8f1eb522 +size 24196 diff --git a/detail_png/Shaft_03121_diam.png b/detail_png/Shaft_03121_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c2fb6d0f2361800d794637125caf23971dd53cca --- /dev/null +++ b/detail_png/Shaft_03121_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc954ece8590190f49be563be9b7d383a2f5d17ab0f825ac95fbd9e29d90a9b7 +size 19062 diff --git a/detail_png/Shaft_03121_length.png b/detail_png/Shaft_03121_length.png new file mode 100644 index 0000000000000000000000000000000000000000..50ce70950340e3437ea63c187fd803603a3e2625 --- /dev/null +++ b/detail_png/Shaft_03121_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc940997eecb26bd57fdeaa82ae447bd3687b2e70265018a99da9f541eb898bf +size 15296 diff --git a/detail_png/Shaft_03121_title.png b/detail_png/Shaft_03121_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b41ad156c941e2c6a1dde74de7e784dde526302a --- /dev/null +++ b/detail_png/Shaft_03121_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a95d9d78aec5ea692d78975c1336ac6ce70c21e7efcc5fe0479565129dca990 +size 18761 diff --git a/detail_png/Shaft_03122_diam.png b/detail_png/Shaft_03122_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bb015e6b4cfa435174fc66ec4b614dc1fbecf052 --- /dev/null +++ b/detail_png/Shaft_03122_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2da18c93281c982e4a7883733d4cd465ed604dad7c27e22df7180a486fed22c8 +size 20292 diff --git a/detail_png/Shaft_03122_length.png b/detail_png/Shaft_03122_length.png new file mode 100644 index 0000000000000000000000000000000000000000..df252426844368c342e64d712c4c01a273c7a8b6 --- /dev/null +++ b/detail_png/Shaft_03122_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16fe82e7f82e3515e9ac164c48bf6f12aadc27f70151b71eec403175eef93062 +size 14978 diff --git a/detail_png/Shaft_03122_title.png b/detail_png/Shaft_03122_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cf45089e2a1050c40e87650df473bbca80b4a458 --- /dev/null +++ b/detail_png/Shaft_03122_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e79297ce9bc49a7630c0615feaa908907aaf10e32311615bd84cb483a2295a2 +size 18789 diff --git a/detail_png/Shaft_03129_diam.png b/detail_png/Shaft_03129_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8d697da6d1a0b3e4d77d3f5180779e2f2707fc22 --- /dev/null +++ b/detail_png/Shaft_03129_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7950c258267937a6f7dacd1258797d1ed749b019c16381e43675771c4da1ac32 +size 30276 diff --git a/detail_png/Shaft_03129_length.png b/detail_png/Shaft_03129_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c1024b60fa7043badb87c3a415054b8ce4f3e40 --- /dev/null +++ b/detail_png/Shaft_03129_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48acac15b7de903f263709f017d2b4b9ccdebff8a57ef2cf4cfdc79dcfe367b +size 26118 diff --git a/detail_png/Shaft_03129_title.png b/detail_png/Shaft_03129_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cec88ccf12d098981b2e2f3decafc451a25fcbbe --- /dev/null +++ b/detail_png/Shaft_03129_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3eb14aa023b775f91b077e9865e6e2832707946d492c8036a754b378009dec93 +size 27627 diff --git a/detail_png/Shaft_03130_diam.png b/detail_png/Shaft_03130_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c6b04cfdba88f8df33ff358e8296a35736028e98 --- /dev/null +++ b/detail_png/Shaft_03130_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a84822067106c32146a9700d47b6717a9fa9c401a171a8283ea8d89eaa5b223 +size 21086 diff --git a/detail_png/Shaft_03130_length.png b/detail_png/Shaft_03130_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b71a8fce146afd05b341a44a529d2d7de5edfcbb --- /dev/null +++ b/detail_png/Shaft_03130_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb84e94b189816bcb486722365ed4481bc3fdaec294937baa510344567fc3f18 +size 28033 diff --git a/detail_png/Shaft_03130_title.png b/detail_png/Shaft_03130_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d7d354ff652464119b40c89d178523217ba2e5c6 --- /dev/null +++ b/detail_png/Shaft_03130_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3192f9eeebb82352a984000cbf9da424d306b19ede18f91f2e89e43db71e9889 +size 35541 diff --git a/detail_png/Shaft_03131_diam.png b/detail_png/Shaft_03131_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ddfb899acf9c8d3be203dc53cee9b8077ed277e6 --- /dev/null +++ b/detail_png/Shaft_03131_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db57496548677bb40a31a617b91b59aa1d7d32cca3ac5fa4e8466a4e1d5732f3 +size 23808 diff --git a/detail_png/Shaft_03131_length.png b/detail_png/Shaft_03131_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d338819f433c67e067c3c294427e614a3047cd75 --- /dev/null +++ b/detail_png/Shaft_03131_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31c0c42a4d925aacd3d7330015b20178f89e682679e2ef546791b5d156b962f5 +size 21424 diff --git a/detail_png/Shaft_03131_title.png b/detail_png/Shaft_03131_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be265cd23209124a01388e0b1d11853d227efe8c --- /dev/null +++ b/detail_png/Shaft_03131_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b4edac3785d15b17c9ef3eb477393becd95d949703951fa0de9d3164f73b7aa +size 25440 diff --git a/detail_png/Shaft_03134_diam.png b/detail_png/Shaft_03134_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1af96d97e569a4c889fb01a7594bd25828781b07 --- /dev/null +++ b/detail_png/Shaft_03134_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5214c1e3dbe80a112ac52a953d09d35f1f36a06c30c9a7c24bf934dd659acb7 +size 30093 diff --git a/detail_png/Shaft_03134_length.png b/detail_png/Shaft_03134_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3382afc3663391517da3f1a28e780e3c9971f6a2 --- /dev/null +++ b/detail_png/Shaft_03134_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c04cf4470d29a411d942bb01e67fd2040421b9a3cd2cd85b1b667601f1d1132 +size 28114 diff --git a/detail_png/Shaft_03134_title.png b/detail_png/Shaft_03134_title.png new file mode 100644 index 0000000000000000000000000000000000000000..233228a9a0741eba667f578744abda88cbc62a20 --- /dev/null +++ b/detail_png/Shaft_03134_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a81a261d572d4e92e83ea4db58b97fed5dfa6cf59d62bda5649edf93af12e477 +size 31618 diff --git a/detail_png/Shaft_03137_diam.png b/detail_png/Shaft_03137_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..53a314c0707168b5af3452b940eb8e203153caec --- /dev/null +++ b/detail_png/Shaft_03137_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98cfdb84a1bf05c2b450e8afb25f06ee3ed1a0bee9c6863f81baedd44270bb75 +size 19382 diff --git a/detail_png/Shaft_03137_length.png b/detail_png/Shaft_03137_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a313f759fe5b0e69abedfb089aac1c3e6c6fa68a --- /dev/null +++ b/detail_png/Shaft_03137_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30b03266e8cbfb854d37afa525560e33b8efba3e0c0aa11774cb8d40af84c0b4 +size 15255 diff --git a/detail_png/Shaft_03137_title.png b/detail_png/Shaft_03137_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8beadae609bec7aae1c866a71425b4dabc897b37 --- /dev/null +++ b/detail_png/Shaft_03137_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a25bef0334e5c17cc3655eade94cd9ecdd549c9ef4c7f786e4c0503521ba1ea8 +size 18357 diff --git a/detail_png/Shaft_03141_diam.png b/detail_png/Shaft_03141_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9450b2ee71ac739f98695bf915271abf5e21eaea --- /dev/null +++ b/detail_png/Shaft_03141_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d547e6cbd33a9ff2dccaf0d6d9f5f8d1c50e159b271d95054af664af6a103848 +size 19108 diff --git a/detail_png/Shaft_03141_length.png b/detail_png/Shaft_03141_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7bf40eaafcdb6469778737f41aeddeeea1b5ce2 --- /dev/null +++ b/detail_png/Shaft_03141_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51c8c5c7fef468808f58c99006c1e02d4b295e06cf190960f175910e55cfd5db +size 17443 diff --git a/detail_png/Shaft_03141_title.png b/detail_png/Shaft_03141_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be7497d3df7ecf17ba6b95ac9d55f90d0d7ef9a9 --- /dev/null +++ b/detail_png/Shaft_03141_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac68005fe4080fd79a9d19c21c8ac9247d33488311164a990d2f989c487b48c9 +size 24680 diff --git a/detail_png/Shaft_03144_diam.png b/detail_png/Shaft_03144_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b432b477c3fca72e328fbdb7bdd85eab193ae4f8 --- /dev/null +++ b/detail_png/Shaft_03144_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eff7c9a4553dfcf264d676eae8d2becbb2c692b195545ec17b6af91306db8623 +size 36175 diff --git a/detail_png/Shaft_03144_length.png b/detail_png/Shaft_03144_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6994b23bf51353a8caabf97d18b969496dbb497c --- /dev/null +++ b/detail_png/Shaft_03144_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c1e6fe14ef78174fa8bf18d6c5b977f1fea3bf131037b819c1f551dd105fc98 +size 32308 diff --git a/detail_png/Shaft_03144_title.png b/detail_png/Shaft_03144_title.png new file mode 100644 index 0000000000000000000000000000000000000000..312d8336ef63ff35c44f447b6752963543387b62 --- /dev/null +++ b/detail_png/Shaft_03144_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dd49d082ddb2f2f7ade3df5711795ebf2203cfaf7db90361a135199b29daae1 +size 33886 diff --git a/detail_png/Shaft_03147_diam.png b/detail_png/Shaft_03147_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..26281c2e4687e68caed83668ec4e6188c3789847 --- /dev/null +++ b/detail_png/Shaft_03147_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:939a3798cb795c8bc1760cf264ce002cb611b189acdad8d33a0fd1aa120cf5c9 +size 30782 diff --git a/detail_png/Shaft_03147_length.png b/detail_png/Shaft_03147_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7fd2725555d23bee011f1fc92e6b68535a6d230c --- /dev/null +++ b/detail_png/Shaft_03147_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a79b447dd882066375e717d335612c3bd5847bbefa656cd50e77d4fc6f1fc6d +size 25607 diff --git a/detail_png/Shaft_03147_title.png b/detail_png/Shaft_03147_title.png new file mode 100644 index 0000000000000000000000000000000000000000..371b1c476d12ccb8046f5df903d3097a3a9f5174 --- /dev/null +++ b/detail_png/Shaft_03147_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab03603026da4463bed2dbc5e6287a0ebd10f60c3c9b2b7d41127d7e2ed409f5 +size 24652 diff --git a/detail_png/Shaft_03149_diam.png b/detail_png/Shaft_03149_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0ad478e7fdb680c52bddb4a1300ec079bb7200cf --- /dev/null +++ b/detail_png/Shaft_03149_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:450ab153abf26d9f2c96a159c6ba5fdcd46a1272153d6315446324a1674ecced +size 26716 diff --git a/detail_png/Shaft_03149_length.png b/detail_png/Shaft_03149_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0cff3353e0d9745980833692a0149c28bc2f3354 --- /dev/null +++ b/detail_png/Shaft_03149_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:310a2c0edcc3daa5a0f7217e69ce5ad2e30b970a95b4bfb8944c008dcb0f1e47 +size 35618 diff --git a/detail_png/Shaft_03149_title.png b/detail_png/Shaft_03149_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ec27e69667c62539d3c5e4a584b61bde6a8e8d6 --- /dev/null +++ b/detail_png/Shaft_03149_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8a945559d97bc490868caf20719a51f016509f86d1a05f4c8ff89a880a09b07 +size 28913 diff --git a/detail_png/Shaft_03153_diam.png b/detail_png/Shaft_03153_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b3381e25fec460643bda92625e68f963f83460af --- /dev/null +++ b/detail_png/Shaft_03153_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03d1b1b9ffb920ddd77b8ebfc7f35df5e960581ebf9895162e7e1fc57888c3cc +size 25685 diff --git a/detail_png/Shaft_03153_length.png b/detail_png/Shaft_03153_length.png new file mode 100644 index 0000000000000000000000000000000000000000..94123dd112f1d605baaee730fdc4139dbd2e72c8 --- /dev/null +++ b/detail_png/Shaft_03153_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:707c611476111dfa51d24261c016dbd3d7e29a9a18af179a7c0b08d70f43fd5e +size 24020 diff --git a/detail_png/Shaft_03153_title.png b/detail_png/Shaft_03153_title.png new file mode 100644 index 0000000000000000000000000000000000000000..df73a674c8a8b767862c9654bd5c1267398f8be3 --- /dev/null +++ b/detail_png/Shaft_03153_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5971ce93c8379b127e34a986e13ed04538d07a86db47d1524b2dcec0d37813c1 +size 27772 diff --git a/detail_png/Shaft_03156_diam.png b/detail_png/Shaft_03156_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8d54ef95cd6a0c4e193e8984e8d5e72d112235d3 --- /dev/null +++ b/detail_png/Shaft_03156_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b737efa35822969ee9e5af04bee9d1884bc1cbe27ff5e3fa9e2116fa0e986c73 +size 25914 diff --git a/detail_png/Shaft_03156_length.png b/detail_png/Shaft_03156_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cc159d4183e3c216374b5f3d652f79e1e6dd9f3a --- /dev/null +++ b/detail_png/Shaft_03156_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7502c3041e01846a2acc00bb523d53654128bdf855b4af6b73ce6004ed126066 +size 19525 diff --git a/detail_png/Shaft_03156_title.png b/detail_png/Shaft_03156_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9ab11a158996983c8750b50b704805824528fc7c --- /dev/null +++ b/detail_png/Shaft_03156_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62432b9c8dc81a81cb2c609428ab51759f8f4d57853344306de3e69f7cb90eca +size 18819 diff --git a/detail_png/Shaft_03157_diam.png b/detail_png/Shaft_03157_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cae94526d085356dd051a5b484a9de4cf181321a --- /dev/null +++ b/detail_png/Shaft_03157_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5faf277bae12f045dfcf9d3d8cf0e6efef2d337c824ba97752ba9f109ecc6140 +size 39580 diff --git a/detail_png/Shaft_03157_length.png b/detail_png/Shaft_03157_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c80ed179ff093fd0c099c55bc380f357e2fbc3de --- /dev/null +++ b/detail_png/Shaft_03157_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68f419b6fa95aa6825ba99b59603a746180f3bcec07611bfe7a996ef29a6d842 +size 33045 diff --git a/detail_png/Shaft_03157_title.png b/detail_png/Shaft_03157_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4347b1bfd79073c5b922041409897e477746909e --- /dev/null +++ b/detail_png/Shaft_03157_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24e6758f5b069fd8bc8af021e60c9a722d69a244f87e6d1a950783507f727d00 +size 31243 diff --git a/detail_png/Shaft_03164_diam.png b/detail_png/Shaft_03164_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..19b47ed070249bcc2a7ebd17559d86c0e6919db1 --- /dev/null +++ b/detail_png/Shaft_03164_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25911c7457755be4153d67b47ee89779813127b01b2dce9382bd8350bb292321 +size 25329 diff --git a/detail_png/Shaft_03164_length.png b/detail_png/Shaft_03164_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e62e42aa0322a23bc5d06053fe01023772ce1bd6 --- /dev/null +++ b/detail_png/Shaft_03164_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a27516030ffa3be63f7bc9ab3a48a327d80cb790c0c1ceafa4a601f2a7f80fb4 +size 21746 diff --git a/detail_png/Shaft_03164_title.png b/detail_png/Shaft_03164_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a2e70c204b199978df72e8c158f17419f5eaaf48 --- /dev/null +++ b/detail_png/Shaft_03164_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc6c5afdd2ba6bd88be6285694776b83a6ddbe7d41b82964a6e873c9ad532ed9 +size 29189 diff --git a/detail_png/Shaft_03167_diam.png b/detail_png/Shaft_03167_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25df982668b72d097c5f3da38ee9e19faeac163f --- /dev/null +++ b/detail_png/Shaft_03167_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8b65ee9622a1ea4642d38e51a3a9ed7a798dd91090445439c5d6e80102a025e +size 25103 diff --git a/detail_png/Shaft_03167_length.png b/detail_png/Shaft_03167_length.png new file mode 100644 index 0000000000000000000000000000000000000000..43e419c3892529c44a43f6bdc5d4c01408b605e7 --- /dev/null +++ b/detail_png/Shaft_03167_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9148e04939751baa0b065bf51da13292d3d8d8d55e85ee342c1d02553c690e8c +size 28120 diff --git a/detail_png/Shaft_03167_title.png b/detail_png/Shaft_03167_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ab6b9e0d39676119e70af975e89d8b13e451df8 --- /dev/null +++ b/detail_png/Shaft_03167_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:377a1045af89aa658d6ca88f484919331ed9cb3b6740051fac9a5686ed7dbd62 +size 34914 diff --git a/detail_png/Shaft_03170_diam.png b/detail_png/Shaft_03170_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..285e789bede5c2fe1dc1dbef3af962bccc9f4bca --- /dev/null +++ b/detail_png/Shaft_03170_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8c98e195537b43086edef7ff289031bb117afa6b9f5d86b25baa6b00a626651 +size 29963 diff --git a/detail_png/Shaft_03170_length.png b/detail_png/Shaft_03170_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b912b6ffa96f4f9ea93940528af1ce1df17dda69 --- /dev/null +++ b/detail_png/Shaft_03170_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c92ac12237e07ca09dc046acec1f1f04e0bfe01be86efbc8cde3972f6ab503b +size 28270 diff --git a/detail_png/Shaft_03170_title.png b/detail_png/Shaft_03170_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9b83b1b33956e033bc8c514847ec215edf059fac --- /dev/null +++ b/detail_png/Shaft_03170_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0730df8b6d624d3c3b90b29749fcb54f4604707530ea4b22e3ed84a889c5e4a5 +size 31194 diff --git a/detail_png/Shaft_03171_diam.png b/detail_png/Shaft_03171_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..91bfeecd82722f21c3508f1f1a62057207138097 --- /dev/null +++ b/detail_png/Shaft_03171_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9b3ff3a754971200aa04121640fbc3e7eb86743b639dda80684606dcf60f46a +size 19891 diff --git a/detail_png/Shaft_03171_length.png b/detail_png/Shaft_03171_length.png new file mode 100644 index 0000000000000000000000000000000000000000..074659549969291d840223d3f61414488d4d14f4 --- /dev/null +++ b/detail_png/Shaft_03171_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3d0184fd4dcdf5bc62c0dd19ee010d2da16ff958ad050effa184a6a809bda3e +size 17650 diff --git a/detail_png/Shaft_03171_title.png b/detail_png/Shaft_03171_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6c931c35cc1ebed52fb81d3879dedf1c2033481b --- /dev/null +++ b/detail_png/Shaft_03171_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b92fe3c5a537e66561ccc3b71fc8a63ab5591756a4e0be303ea0570bedaf578 +size 18687 diff --git a/detail_png/Shaft_03174_diam.png b/detail_png/Shaft_03174_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f72d288b555f8d6bb2abb457bf0d02d364fe201a --- /dev/null +++ b/detail_png/Shaft_03174_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dda5a562ba9b603209ad56e0e0c52ac5d635a7d4442ae4243cb825c1e89d19e +size 25361 diff --git a/detail_png/Shaft_03174_length.png b/detail_png/Shaft_03174_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6bba498979055be78ea0c820e772c056d2f3ed1f --- /dev/null +++ b/detail_png/Shaft_03174_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1545d306a67177754df41e0f7e64a0774d4c353c445c8e4fa8806d09182b455d +size 22202 diff --git a/detail_png/Shaft_03174_title.png b/detail_png/Shaft_03174_title.png new file mode 100644 index 0000000000000000000000000000000000000000..245ce3f87c915241659217636f40c114417e04c9 --- /dev/null +++ b/detail_png/Shaft_03174_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56bfbf08df5a41bfe197e32815690ceb2bdce35b5b9388131aae0c9630aa8af4 +size 30296 diff --git a/detail_png/Shaft_03178_diam.png b/detail_png/Shaft_03178_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..266455cd0106af0e9b5e3a63acf945e697de8690 --- /dev/null +++ b/detail_png/Shaft_03178_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ba27e336c5ff51c29fef7cae439c5270c31d1b352e13969c2bddb25eeca1944 +size 33981 diff --git a/detail_png/Shaft_03178_length.png b/detail_png/Shaft_03178_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fec864f736b296631224870dc7cf839fe20e573c --- /dev/null +++ b/detail_png/Shaft_03178_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cbd487e034cae32399184e7e942b50b208bd7cf1668f82512ad4a303126d143 +size 34422 diff --git a/detail_png/Shaft_03178_title.png b/detail_png/Shaft_03178_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7be030918f0408a8728e8fbabd2e912fa47150e2 --- /dev/null +++ b/detail_png/Shaft_03178_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d96b79259aa91daf8b489a654f12f48bbf00c4dadee611d6b4ef97a69d58cc3a +size 29592 diff --git a/detail_png/Shaft_03182_diam.png b/detail_png/Shaft_03182_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4424638abc2156095f37b2b7c1d3aa5de6cfe549 --- /dev/null +++ b/detail_png/Shaft_03182_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:214374f62faefea739c02ca68530f2242a61bd8049767879e974e4a4646835fc +size 20190 diff --git a/detail_png/Shaft_03182_length.png b/detail_png/Shaft_03182_length.png new file mode 100644 index 0000000000000000000000000000000000000000..12ca4e6102828351e8996062a0f6b0793de59d6d --- /dev/null +++ b/detail_png/Shaft_03182_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0191c34c33a2420d189bd24b7f7b80b5e53ee167269105db3ed041536e7e04c7 +size 23150 diff --git a/detail_png/Shaft_03182_title.png b/detail_png/Shaft_03182_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2973db5cffc9bd2565df41006c857cc1e1685c28 --- /dev/null +++ b/detail_png/Shaft_03182_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52ba00741b1c98ff41a975181128f95f0df47ab998cb2b6a888b115e86d7c997 +size 32283 diff --git a/detail_png/Shaft_03183_diam.png b/detail_png/Shaft_03183_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..24cba7278fe8fce037b86c5d74d6b2808a85e67c --- /dev/null +++ b/detail_png/Shaft_03183_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce9aa2c72bac2fed3998c47719cd1637cbec77501494a4f4b0796e0c4400f6e +size 25965 diff --git a/detail_png/Shaft_03183_length.png b/detail_png/Shaft_03183_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ed4fadcf8371d02ca5126aa75c5b9b51b01a7ae3 --- /dev/null +++ b/detail_png/Shaft_03183_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:470911a6a0b7b9da76db0e92bb50e1692cea4def2277b00867c28ec47e24de10 +size 32089 diff --git a/detail_png/Shaft_03183_title.png b/detail_png/Shaft_03183_title.png new file mode 100644 index 0000000000000000000000000000000000000000..188c3b0c8a1c82cd48b61c5cfcf01c10a321c4b9 --- /dev/null +++ b/detail_png/Shaft_03183_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5da3680661a514be8625bf03ed38bd108e75e39ce2a5bcee883d7325a86282a +size 32728 diff --git a/detail_png/Shaft_03186_diam.png b/detail_png/Shaft_03186_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..40fb99c28ba6bf385e4316d6a5e9bfcc672154b4 --- /dev/null +++ b/detail_png/Shaft_03186_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9970e8a3ad0c902d7b1546c83e83a9cd3761805a5b13995ec857f4a9d4277ce +size 29912 diff --git a/detail_png/Shaft_03186_length.png b/detail_png/Shaft_03186_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f6b4b7b37cbb323baba1a412fd24cf3a23ebfdf --- /dev/null +++ b/detail_png/Shaft_03186_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:049a13febfbdd43fb25520aaad0d9a28995789d29b000ea1ffbb6cd18184c3cd +size 29919 diff --git a/detail_png/Shaft_03186_title.png b/detail_png/Shaft_03186_title.png new file mode 100644 index 0000000000000000000000000000000000000000..39f02aed2e66f8cc7d659ecd54b6a709c0d542f9 --- /dev/null +++ b/detail_png/Shaft_03186_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce6bb78e942e8a847c2930ad0bcba8030ab7e44a9aa3ddbf7d6405d2e66d411 +size 30125 diff --git a/detail_png/Shaft_03190_diam.png b/detail_png/Shaft_03190_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..218fed2f43f9adcc068ec9eeb035262c75125b61 --- /dev/null +++ b/detail_png/Shaft_03190_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25e832b10ee66e06337e248b5281da9ef128b549482ed1a06d4c1b963503ac74 +size 24652 diff --git a/detail_png/Shaft_03190_length.png b/detail_png/Shaft_03190_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9ae1eaf052ab0701cada1abd974ca7827539ada5 --- /dev/null +++ b/detail_png/Shaft_03190_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c0d89afbd5491805d105fa3dd073da553b3f1756e18d51c3d821d647c337f76 +size 19184 diff --git a/detail_png/Shaft_03190_title.png b/detail_png/Shaft_03190_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5996fe31f546b6db9284f18f931bfc77bfb4b7e2 --- /dev/null +++ b/detail_png/Shaft_03190_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:475f87c706e826facddac455071a2dd2164f16c3de2b32adb6fff01d358e006d +size 21925 diff --git a/detail_png/Shaft_03194_diam.png b/detail_png/Shaft_03194_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ec317c107395e736be86f3dc87123d6c6e3ceece --- /dev/null +++ b/detail_png/Shaft_03194_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab7f71d1f753885ed5206cccc1a018773696da30b4bb5fe76d2cec5a3f7c8713 +size 30801 diff --git a/detail_png/Shaft_03194_length.png b/detail_png/Shaft_03194_length.png new file mode 100644 index 0000000000000000000000000000000000000000..24f63b58f525943a964b1b0869976614d1eab1fc --- /dev/null +++ b/detail_png/Shaft_03194_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:803e6ad2b92639b223907f47051ea8d40cbe1444d7c0f6390a3ca8903408372a +size 22944 diff --git a/detail_png/Shaft_03194_title.png b/detail_png/Shaft_03194_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bb2f9c703f425824790992824627a7aaa58f62e4 --- /dev/null +++ b/detail_png/Shaft_03194_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d37fccbd7398f1c44ffd82179bac8e4378e4739adb9b9f8709f1f198ea7ec944 +size 34224 diff --git a/detail_png/Shaft_03196_diam.png b/detail_png/Shaft_03196_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3416a0146fa401f8547a348ab956c177c0761050 --- /dev/null +++ b/detail_png/Shaft_03196_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962e621e0ff46bda1fa3bab67a93f9d8f7413020de638d30a40b025fe1411089 +size 27513 diff --git a/detail_png/Shaft_03196_length.png b/detail_png/Shaft_03196_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0df8c5423198a1b33bb23ca72bb2fc5abee41ade --- /dev/null +++ b/detail_png/Shaft_03196_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1e34405ea259dab3d45af9df0d70996bb374bd9485a62803c5e3b0088420a47 +size 26178 diff --git a/detail_png/Shaft_03196_title.png b/detail_png/Shaft_03196_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ddf056164a5aa2ca523ea169348da8ddc6efa493 --- /dev/null +++ b/detail_png/Shaft_03196_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d60d6a2c3238669b4e5cdbdcc736d71f3171f96b910c91f72e95841657633534 +size 31138 diff --git a/detail_png/Shaft_03202_diam.png b/detail_png/Shaft_03202_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8497557929e19354c1a53bc98f2dc28f1b515882 --- /dev/null +++ b/detail_png/Shaft_03202_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2b94cc09be1ae3098cbf67b9e05740d17c1ae55c0e018ba76ebca89f25d8ada +size 25297 diff --git a/detail_png/Shaft_03202_length.png b/detail_png/Shaft_03202_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8a3cfaa3785a94ffadbcdb2eee49338db8d76d31 --- /dev/null +++ b/detail_png/Shaft_03202_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9359b7cb268bbe618dbc5c0c1f8034e08cea8abbfcf9ac5abe4886070d1e9d0b +size 35671 diff --git a/detail_png/Shaft_03202_title.png b/detail_png/Shaft_03202_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b174209db131324cbf120dc2366bdd0c52ebaa8b --- /dev/null +++ b/detail_png/Shaft_03202_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5abd0cba97519058666f042877ff5074a33a12f96496410fd5c77171c835d572 +size 36467 diff --git a/detail_png/Shaft_03204_diam.png b/detail_png/Shaft_03204_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c3e9f4d01d44427451f4296e86024819d008e80e --- /dev/null +++ b/detail_png/Shaft_03204_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a28092972a9629fbee9695d687d579ff72ee5117e0971cc03108a66737b605ff +size 28754 diff --git a/detail_png/Shaft_03204_length.png b/detail_png/Shaft_03204_length.png new file mode 100644 index 0000000000000000000000000000000000000000..99ee7f725885972b5c2d2ab2d13a36d4c3114fab --- /dev/null +++ b/detail_png/Shaft_03204_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:393904aa1583a66bb3f41d18ea4296aae4a8469c3215bd75cd0831b3c5a2b439 +size 25805 diff --git a/detail_png/Shaft_03204_title.png b/detail_png/Shaft_03204_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dfa0966b714de11559c4e72134754ca10845fbbd --- /dev/null +++ b/detail_png/Shaft_03204_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2aa89b40532ee024794f5a84e08654cf142e9ccd99e31087f56ff61f8bdafa61 +size 29367 diff --git a/detail_png/Shaft_03207_diam.png b/detail_png/Shaft_03207_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d53de3bd4e22f76b2a2e46914d165e3a6536674 --- /dev/null +++ b/detail_png/Shaft_03207_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbe40f71828fce4e523873d76d9c84fcf3c660d9efec86056d5609682580fafc +size 29861 diff --git a/detail_png/Shaft_03207_length.png b/detail_png/Shaft_03207_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e96e330a5425712038b0d45fedc4542f7f4a014 --- /dev/null +++ b/detail_png/Shaft_03207_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d615622e44ccce2bf2c6dd2decae066a0d5a724dafb7e028b60a15586c7ffc2d +size 30095 diff --git a/detail_png/Shaft_03207_title.png b/detail_png/Shaft_03207_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2b107ee1c9cc6de8a2720ba73a792c326bff5f4 --- /dev/null +++ b/detail_png/Shaft_03207_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:928e8bbf1172f9b31c642c10b3f50ffbbd8cc493116e06b6eb218221248e109a +size 35325 diff --git a/detail_png/Shaft_03211_diam.png b/detail_png/Shaft_03211_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f19031ee9f2a509340d7a9fd01594354390ddda4 --- /dev/null +++ b/detail_png/Shaft_03211_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef02ad7067bd35ba3ad9084d5306b0cd157430575cd5ef79dcd89ebb8ed7ef08 +size 18606 diff --git a/detail_png/Shaft_03211_length.png b/detail_png/Shaft_03211_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4d677784c147f1cfb832fc738f75e84a5eb602e7 --- /dev/null +++ b/detail_png/Shaft_03211_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:512b01f1178562f1f2c087dd0b2ffe12ca0ed275f1fbebcde7f89c74145dd720 +size 15241 diff --git a/detail_png/Shaft_03211_title.png b/detail_png/Shaft_03211_title.png new file mode 100644 index 0000000000000000000000000000000000000000..665f3fa84f02d5739b26ed449a456cab9b67744f --- /dev/null +++ b/detail_png/Shaft_03211_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe9b8a19a5ca0d4881a66e28a6b3e62ccf1f8e942bd29df7093a002592416839 +size 18801 diff --git a/detail_png/Shaft_03212_diam.png b/detail_png/Shaft_03212_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d3eabc2b569332188404c9d2f5b9e3cafa83ad93 --- /dev/null +++ b/detail_png/Shaft_03212_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7aa0af45dcb822f27148841620bb31664614ca92648fdf68bd48b1549c001a2 +size 19090 diff --git a/detail_png/Shaft_03212_length.png b/detail_png/Shaft_03212_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0eaec8c9275e68bdfb7907446b2048188759eccf --- /dev/null +++ b/detail_png/Shaft_03212_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7907c6f320323f3ef0b96b04a5e777224c179d86cbc43b0716794154ee887d0a +size 17926 diff --git a/detail_png/Shaft_03212_title.png b/detail_png/Shaft_03212_title.png new file mode 100644 index 0000000000000000000000000000000000000000..25749952eff18accae0a39bd766b3eeb74518992 --- /dev/null +++ b/detail_png/Shaft_03212_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc40f9b402a01088697c018a7b21ae02566723756b8fd9773d9248533735284d +size 29010 diff --git a/detail_png/Shaft_03220_diam.png b/detail_png/Shaft_03220_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..22eac7cbb6baea9f95274c88b0da52ea321bbe72 --- /dev/null +++ b/detail_png/Shaft_03220_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06e6c3d8c9e9aa62a1bd1706186acfd3f17ab265d704225daed4dc3dc50e8b17 +size 25421 diff --git a/detail_png/Shaft_03220_length.png b/detail_png/Shaft_03220_length.png new file mode 100644 index 0000000000000000000000000000000000000000..27c7dacff43b5287031d9438eeff39ebf57f8c40 --- /dev/null +++ b/detail_png/Shaft_03220_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f76de8ef20a9ac85397a9a8bbe84e9f0f945cac011f75521b1df71d97bac01c3 +size 33731 diff --git a/detail_png/Shaft_03220_title.png b/detail_png/Shaft_03220_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3a7e028856fa8a7e7ccae76b546696a35fccd7fd --- /dev/null +++ b/detail_png/Shaft_03220_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e713ffeb895eaf6edfa705ab99e02a122f34facdb39166003f59e276d2dc15ac +size 33053 diff --git a/detail_png/Shaft_03225_diam.png b/detail_png/Shaft_03225_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..89aaddccda5249ec48983d2f98210279d8209555 --- /dev/null +++ b/detail_png/Shaft_03225_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b15bca1a7169ad05a69d82a061eb6d66585d66bd3ab21c93a6bb17155cdad7b +size 37295 diff --git a/detail_png/Shaft_03225_length.png b/detail_png/Shaft_03225_length.png new file mode 100644 index 0000000000000000000000000000000000000000..741486d72104e1ed51fa540c4ce42c2f4b2c0829 --- /dev/null +++ b/detail_png/Shaft_03225_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:caff23b159c8a5b1edc9e2b529d955230a4b676f38b236265019bdf92733dab3 +size 46288 diff --git a/detail_png/Shaft_03225_title.png b/detail_png/Shaft_03225_title.png new file mode 100644 index 0000000000000000000000000000000000000000..85d9d35f9eb7a6ccefad217c8ad407cc83bd2740 --- /dev/null +++ b/detail_png/Shaft_03225_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:619642f0986b2c8f27fd8441bb0272a19cffe32f5f0cba0be336deae4135febe +size 36354 diff --git a/detail_png/Shaft_03232_diam.png b/detail_png/Shaft_03232_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d612beb8bc2affad18ee396edc8ff96dc123b738 --- /dev/null +++ b/detail_png/Shaft_03232_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adb683d7bcb2d9da6305bcbea3efe973ce87919dc2815b703056abe90cea0a86 +size 32506 diff --git a/detail_png/Shaft_03232_length.png b/detail_png/Shaft_03232_length.png new file mode 100644 index 0000000000000000000000000000000000000000..909ffa8d255d703bd03bbd4f9fb54f690d3e7991 --- /dev/null +++ b/detail_png/Shaft_03232_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:615435584a4c5bfa195aac65d1b1772b679551082817dbab0a50baf70544150f +size 24546 diff --git a/detail_png/Shaft_03232_title.png b/detail_png/Shaft_03232_title.png new file mode 100644 index 0000000000000000000000000000000000000000..544793dda11fc557034cbcd422b94b1779172344 --- /dev/null +++ b/detail_png/Shaft_03232_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2fecba96a615d2ed41fba60faacf8828ebf207fe1f80b0b8a8e8bfe987c0539b +size 15748 diff --git a/detail_png/Shaft_03233_diam.png b/detail_png/Shaft_03233_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..438121fd2620e7a51313435797b4f892a6e8830f --- /dev/null +++ b/detail_png/Shaft_03233_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e46c00b12d0d1d435b665720ba8ae0f17221c3a8c9d53520950718c8a286798 +size 33092 diff --git a/detail_png/Shaft_03233_length.png b/detail_png/Shaft_03233_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8ea6af04acfaa587f9550622b378ccf9ae4d8356 --- /dev/null +++ b/detail_png/Shaft_03233_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92dcf284ccc61945b8ba9398c2966252eaf0570d2fc50e3738c53a081ba89c37 +size 46732 diff --git a/detail_png/Shaft_03233_title.png b/detail_png/Shaft_03233_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4524d4e3944bf2108e0ce63309063ad1dba1e78d --- /dev/null +++ b/detail_png/Shaft_03233_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:798ce58f54d0e58db0d5a39dfbc16e79752928f450a70476f40a927c36140c72 +size 31815 diff --git a/detail_png/Shaft_03234_diam.png b/detail_png/Shaft_03234_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94be0a80fec6b1431a10a189d2ab497c7e443d11 --- /dev/null +++ b/detail_png/Shaft_03234_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:789fa1c5128ed31b2e24a61f65a8f3b2b0f84db013fc737810faeb08d9185fc7 +size 20578 diff --git a/detail_png/Shaft_03234_length.png b/detail_png/Shaft_03234_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2e90ee6b31d8543255974d3d72a6b356be832f7a --- /dev/null +++ b/detail_png/Shaft_03234_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fe1077d5d54fe7bedd615de0a8c58add84f938a137c2be0c478dea00877f16a +size 24927 diff --git a/detail_png/Shaft_03234_title.png b/detail_png/Shaft_03234_title.png new file mode 100644 index 0000000000000000000000000000000000000000..32bdca1cc7ba579c6929c3d989d697fff0b50d7b --- /dev/null +++ b/detail_png/Shaft_03234_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01f677823f0c19d5505347d1d70e4445e4479c26769139165589a72759f680f8 +size 32482 diff --git a/detail_png/Shaft_03238_diam.png b/detail_png/Shaft_03238_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..71e499bf45208ccc6fad17a5f1ecca9daa6fdfcc --- /dev/null +++ b/detail_png/Shaft_03238_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b327b596acab21b57b7721d8e35a921122e4a66855da816d99de755c54471bf +size 33839 diff --git a/detail_png/Shaft_03238_length.png b/detail_png/Shaft_03238_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d6047548bcc639875457e163cf92f96a263fce26 --- /dev/null +++ b/detail_png/Shaft_03238_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31eaa98358e199c8ff19010225521003b3dfc2ae23ed587d840a55833d42869c +size 25483 diff --git a/detail_png/Shaft_03238_title.png b/detail_png/Shaft_03238_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b887dcc47d480a1aad4d3f3d44f1056dc7460076 --- /dev/null +++ b/detail_png/Shaft_03238_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec02056e9e9a21d773d59483086ee3933464d187482b23d02f2005cdf6f01f4c +size 21400 diff --git a/detail_png/Shaft_03241_diam.png b/detail_png/Shaft_03241_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c9a2c43b047ac2d0799ed45c100bd3cc3a5082a0 --- /dev/null +++ b/detail_png/Shaft_03241_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a13436de176f0c4aab29d89237a800e8ce925209d6e0f2b3d1382f2f3a36a1b +size 20117 diff --git a/detail_png/Shaft_03241_length.png b/detail_png/Shaft_03241_length.png new file mode 100644 index 0000000000000000000000000000000000000000..48b4d37aa18c7b93603111aeb5c68a6322826e55 --- /dev/null +++ b/detail_png/Shaft_03241_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1bd4e8fa9f24f3e4b9901eb01c12a544554c889f397ab80e995ac288a6bb3b4 +size 14784 diff --git a/detail_png/Shaft_03241_title.png b/detail_png/Shaft_03241_title.png new file mode 100644 index 0000000000000000000000000000000000000000..30fbc4e1f4663062c230e84671035f9b9475ec64 --- /dev/null +++ b/detail_png/Shaft_03241_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:394b015de3dbdaed34159cc0de4cb9f74259aeb033a25a2125dd5b5aff2087f7 +size 15907 diff --git a/detail_png/Shaft_03242_diam.png b/detail_png/Shaft_03242_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cf225def1aec0628e44723009d2cf06615320d26 --- /dev/null +++ b/detail_png/Shaft_03242_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e030c37313a004aee8291f9c8c58697c69fe5d913413340f4a010b9a0708b80 +size 27735 diff --git a/detail_png/Shaft_03242_length.png b/detail_png/Shaft_03242_length.png new file mode 100644 index 0000000000000000000000000000000000000000..05419a0371734a0a4c6116b032bf69e259fc5b19 --- /dev/null +++ b/detail_png/Shaft_03242_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4afeacd3bc49225e1fb44a8cae571e690b610de20cade3874182fc59cb8ca0aa +size 40839 diff --git a/detail_png/Shaft_03242_title.png b/detail_png/Shaft_03242_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1da1ec91bf1cc4ad661330e451254a5a94d43e60 --- /dev/null +++ b/detail_png/Shaft_03242_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a56e5cacde341a0987c1b3903dbbf2e3b487624f309d87bcbe760c63da2b520 +size 35854 diff --git a/detail_png/Shaft_03253_diam.png b/detail_png/Shaft_03253_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..62a5ff32b26ae57515e943e5872115b94f562bac --- /dev/null +++ b/detail_png/Shaft_03253_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95f8caf68b083ce4ffdf673ae905d69d76d57962f204f076ce66aa405b94cdda +size 29601 diff --git a/detail_png/Shaft_03253_length.png b/detail_png/Shaft_03253_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b31dfa668fd1f45372100463f4443914434b999e --- /dev/null +++ b/detail_png/Shaft_03253_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cb82ac049a3a196f91031f2437f498eecac998179e1c9891861afebca4466b8 +size 42536 diff --git a/detail_png/Shaft_03253_title.png b/detail_png/Shaft_03253_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ae00fc9d2d220f79a5edff42198402b7257e29ed --- /dev/null +++ b/detail_png/Shaft_03253_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a9e52e67dd05b96b40755de49982557789b9fdf542deac8a20c2d879889bc9a +size 33652 diff --git a/detail_png/Shaft_03256_diam.png b/detail_png/Shaft_03256_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e53967d768cc9592b5206be6edafd49301088a0e --- /dev/null +++ b/detail_png/Shaft_03256_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6280d2de1bc11d415e99a9a8b1727613ab5fa223c8743510598330ec805f9d7c +size 25085 diff --git a/detail_png/Shaft_03256_length.png b/detail_png/Shaft_03256_length.png new file mode 100644 index 0000000000000000000000000000000000000000..33e9d8ebf021c9725cbe846b041a438d53c21c89 --- /dev/null +++ b/detail_png/Shaft_03256_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72080a278cc8b20c3af75743bbc535de527b2966c48ce7b22b533df1b9593151 +size 19233 diff --git a/detail_png/Shaft_03256_title.png b/detail_png/Shaft_03256_title.png new file mode 100644 index 0000000000000000000000000000000000000000..95518c9be4b69f691c770c2691b136b1858ec3b2 --- /dev/null +++ b/detail_png/Shaft_03256_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23af4703a8c6bf1e077889085f62f7fbcbe16741f616d511b406d220116138c4 +size 22084 diff --git a/detail_png/Shaft_03259_diam.png b/detail_png/Shaft_03259_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..60479b2b0730c55d1462b0e0f00cc13815284a2b --- /dev/null +++ b/detail_png/Shaft_03259_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e2dc220d3f08fa05b047d3afd00937e53b9669f7ece35c0bc4e4bd38ad05732 +size 30425 diff --git a/detail_png/Shaft_03259_length.png b/detail_png/Shaft_03259_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a50f370ab99eb4efc8b23e2cf177f1570f6b694e --- /dev/null +++ b/detail_png/Shaft_03259_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0823e7f15b331b871f0cb35c6823b6de3279edbf587bbbc3c985e75f8808ad61 +size 29286 diff --git a/detail_png/Shaft_03259_title.png b/detail_png/Shaft_03259_title.png new file mode 100644 index 0000000000000000000000000000000000000000..50d109d24f23f38cbd09cc6efbebb2ceb7d5ce19 --- /dev/null +++ b/detail_png/Shaft_03259_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:036dcf11e99cf66c64d902d6373ea1883350cbeedd3b201133ebe354df557dc6 +size 36309 diff --git a/detail_png/Shaft_03261_diam.png b/detail_png/Shaft_03261_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..36315e4ec7e139c382e93bdec917be135c3f904b --- /dev/null +++ b/detail_png/Shaft_03261_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0e38c6980e851ebffacfb49c03e3705a827d5530195e553ede3b50926b95353 +size 20280 diff --git a/detail_png/Shaft_03261_length.png b/detail_png/Shaft_03261_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d236a444e1bee7fea3d60bf6834ec6eb930d866f --- /dev/null +++ b/detail_png/Shaft_03261_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b883dca619fb4ea625affd73f59c191ad8e93404494c61cdb7938f1dfdd4e91e +size 21549 diff --git a/detail_png/Shaft_03261_title.png b/detail_png/Shaft_03261_title.png new file mode 100644 index 0000000000000000000000000000000000000000..da52e03cf411f8a3cc6b6418c7d0807d9a0d7e21 --- /dev/null +++ b/detail_png/Shaft_03261_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:799af35f79c5c19c80129b159c94d9c71f0ef8b756e0777b363984d764a243c0 +size 29059 diff --git a/detail_png/Shaft_03270_diam.png b/detail_png/Shaft_03270_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d7db2962337eaf9aa96590dedfc1dffa7f8180a4 --- /dev/null +++ b/detail_png/Shaft_03270_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2f127991da97a0869f5de1e56c2aaec80494be93db2827aae2d3ba5afa96767 +size 29313 diff --git a/detail_png/Shaft_03270_length.png b/detail_png/Shaft_03270_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fd7f228f0c4bdc23e6cbc805dc3110df45f945e5 --- /dev/null +++ b/detail_png/Shaft_03270_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d3d2771f4418c5a58efbb3a5fa83703f60f05007dd077f898c37188846054e6 +size 21873 diff --git a/detail_png/Shaft_03270_title.png b/detail_png/Shaft_03270_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f13b9cdf293a3d105ba96800e61b1d6704cc0975 --- /dev/null +++ b/detail_png/Shaft_03270_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0e0f8b1afd05880540234145f3a0b7dc86e9e98285d3403e76d89f3c69cbcaf +size 24976 diff --git a/detail_png/Shaft_03271_diam.png b/detail_png/Shaft_03271_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1e151f7c95756d285455d04be377db9226c481fc --- /dev/null +++ b/detail_png/Shaft_03271_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57ef8582ca2c7ee01ea725fa067884f6fa7eaa7d4f648d728579b600658cbd92 +size 23812 diff --git a/detail_png/Shaft_03271_length.png b/detail_png/Shaft_03271_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2aad49fa77c9c0a7ea978ea7f7d4a9a6c07758ba --- /dev/null +++ b/detail_png/Shaft_03271_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b283999c5f2f537c81704ea2b0a56bb919171e6c4a86647b16223250819179d +size 33582 diff --git a/detail_png/Shaft_03271_title.png b/detail_png/Shaft_03271_title.png new file mode 100644 index 0000000000000000000000000000000000000000..687994a54739eaca87fbba0ab146325ca0714adc --- /dev/null +++ b/detail_png/Shaft_03271_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a51f25de35e9d211161389cadb0cf2a731b287d855664d9f18e271ec6b86bc35 +size 34906 diff --git a/detail_png/Shaft_03272_diam.png b/detail_png/Shaft_03272_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..68f21155849ff96d75a03bd75121c49b013f8a0e --- /dev/null +++ b/detail_png/Shaft_03272_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b62eb6f8f2344d1e584302240b74d4258c4fb52941b40471eb22080f3319d9c4 +size 26902 diff --git a/detail_png/Shaft_03272_length.png b/detail_png/Shaft_03272_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e8ab08ec7e75b32b4f7723f25880bf3e4e74d560 --- /dev/null +++ b/detail_png/Shaft_03272_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b22734c2053807cd16b9b907a39a4f86eb1343c82f47780f33abb784066b06ab +size 22711 diff --git a/detail_png/Shaft_03272_title.png b/detail_png/Shaft_03272_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bbd1624271af69230c0e23c6507307b203878cfe --- /dev/null +++ b/detail_png/Shaft_03272_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13f2fb35200bb1c39473bfc703b1b9f4024d7c538c9fc8316e084145dada6475 +size 32038 diff --git a/detail_png/Shaft_03273_diam.png b/detail_png/Shaft_03273_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5255222bc921aab7007a6a5b846eeaafb418b87e --- /dev/null +++ b/detail_png/Shaft_03273_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbdc9fa1d055c196255dccbbbfa03ccc1d084ee0d0bb5087cfefaeb44772a3ec +size 20391 diff --git a/detail_png/Shaft_03273_length.png b/detail_png/Shaft_03273_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b4b9cf18d4bfa5e0a51fe7801143041efbd35993 --- /dev/null +++ b/detail_png/Shaft_03273_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c70959f977c1fda572624a25921b5a8b5917408a53c2c513696b853d700579b3 +size 25444 diff --git a/detail_png/Shaft_03273_title.png b/detail_png/Shaft_03273_title.png new file mode 100644 index 0000000000000000000000000000000000000000..30832cf8c9c4c6be923f1e1fc85a2f5dad2de587 --- /dev/null +++ b/detail_png/Shaft_03273_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1dbf70893d2a6f74b3f5bce94c5046307b0affe4ef5ab7668af69b9912ab7878 +size 32703 diff --git a/detail_png/Shaft_03276_diam.png b/detail_png/Shaft_03276_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9bec7a9313328f656ff417d9921d36c722b5310e --- /dev/null +++ b/detail_png/Shaft_03276_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49e70dabac92924c5cb9e80e877ad690a20f9e2b61964b1c0dacf3a5bc6cdb6b +size 32315 diff --git a/detail_png/Shaft_03276_length.png b/detail_png/Shaft_03276_length.png new file mode 100644 index 0000000000000000000000000000000000000000..536709a2fe2b3fd881ba07805653933103a442f9 --- /dev/null +++ b/detail_png/Shaft_03276_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc8f146af9bcc669ff86457f317aabdccd343555af6252fe032e2a35b479ad6f +size 44854 diff --git a/detail_png/Shaft_03276_title.png b/detail_png/Shaft_03276_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3b6e752511cb0fd4492f992d9910d9d69f85e966 --- /dev/null +++ b/detail_png/Shaft_03276_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb2e919c23935869d395138f060406c494072eeea2967522a19b01b0e0311400 +size 36400 diff --git a/detail_png/Shaft_03279_diam.png b/detail_png/Shaft_03279_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7ef6b35b339cd2a255b44a3eeecdbb5b99d396b5 --- /dev/null +++ b/detail_png/Shaft_03279_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e0c3d2083aa521a4c23d09dc219be7e037675bd74a4699af5043c7910b88d5e +size 19057 diff --git a/detail_png/Shaft_03279_length.png b/detail_png/Shaft_03279_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d2fbb29a5217260e557ecdcb0e57f6315c941724 --- /dev/null +++ b/detail_png/Shaft_03279_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c61441164b169ca8bde3870f04f95e8c072c97a1de4396ec5e61c0caa2cf8cb +size 18252 diff --git a/detail_png/Shaft_03279_title.png b/detail_png/Shaft_03279_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8fc7bc4b53bad333d360f1d3301467ab22762b50 --- /dev/null +++ b/detail_png/Shaft_03279_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60db58a97d1db89a6bf01329cf5f9f3fbdfec92a6e40e2d0e269b043ff2ab9e3 +size 23854 diff --git a/detail_png/Shaft_03285_diam.png b/detail_png/Shaft_03285_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bfd8b3ae4a9b3f1271e0215028d535762c11127e --- /dev/null +++ b/detail_png/Shaft_03285_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8e3defa20f1487837c2362d18ce5aa7551feab78a4203e9fe841269cab5c384 +size 34737 diff --git a/detail_png/Shaft_03285_length.png b/detail_png/Shaft_03285_length.png new file mode 100644 index 0000000000000000000000000000000000000000..95f8e8feb6c2bd3a6947864f6f9fdab345de6b5e --- /dev/null +++ b/detail_png/Shaft_03285_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa4481656b9f0dbf9d7384fc640164b90dff4427ce080f77265c2af82b679fe0 +size 31577 diff --git a/detail_png/Shaft_03285_title.png b/detail_png/Shaft_03285_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1566c2a4f509f38d853bf65c003301077782ec11 --- /dev/null +++ b/detail_png/Shaft_03285_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a47f6b092b030041aa3035d0b17bfcf7730d803ffc5f52f42dba0dc0b17e8336 +size 36146 diff --git a/detail_png/Shaft_03286_diam.png b/detail_png/Shaft_03286_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0dcbcb355cea7bc42a31a80343300df7f55f870c --- /dev/null +++ b/detail_png/Shaft_03286_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffb6f0f737687425f9b4c300461ffa7fc2045cf114f6bd1bbbee88265a14bb81 +size 19124 diff --git a/detail_png/Shaft_03286_length.png b/detail_png/Shaft_03286_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3712833bcbc38666521d82d9ea6d54004d12c71b --- /dev/null +++ b/detail_png/Shaft_03286_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:867150945ad63c84e6605af6f97dee99bdf788b82e03f1e91a4c4b5386e092b0 +size 15739 diff --git a/detail_png/Shaft_03286_title.png b/detail_png/Shaft_03286_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fd05134366014817dacfaa692ea10eec2f060dc2 --- /dev/null +++ b/detail_png/Shaft_03286_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9475d3cb9f094f71902119603a90edf95b31d68f7b5e79d36858f04d47295a4 +size 22062 diff --git a/detail_png/Shaft_03292_diam.png b/detail_png/Shaft_03292_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..751eee45a38b1f16715b8377fe1f116e294d1df5 --- /dev/null +++ b/detail_png/Shaft_03292_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2ffb8870c60b515635ea05061a3b85ee6bab1cece2154f248bd53d419dc667a +size 24366 diff --git a/detail_png/Shaft_03292_length.png b/detail_png/Shaft_03292_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b711a52fd5aa8eaf9b577ae509adfcf5721d41f3 --- /dev/null +++ b/detail_png/Shaft_03292_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f9e9c7c00cd7f3334ed94875c0d3b7967a032b96559fb82bfa160441c60f793 +size 21498 diff --git a/detail_png/Shaft_03292_title.png b/detail_png/Shaft_03292_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e47db1a29e2b5689e62980ef11e7e54598a9a969 --- /dev/null +++ b/detail_png/Shaft_03292_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35a54b204a0e1ff3ef96019c6a3bf6aa471ff3040422ca024fe77d972e5d9873 +size 19196 diff --git a/detail_png/Shaft_03297_diam.png b/detail_png/Shaft_03297_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f951a64a075af9ee89045d4396538ac458934e9f --- /dev/null +++ b/detail_png/Shaft_03297_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:077358b387998e3e9f2a55ea594713377ed2b3ce4b0cd3d52fae6bf56428ee29 +size 29510 diff --git a/detail_png/Shaft_03297_length.png b/detail_png/Shaft_03297_length.png new file mode 100644 index 0000000000000000000000000000000000000000..879eb2b51d9ddde6aeeaeeb839cdf12847372568 --- /dev/null +++ b/detail_png/Shaft_03297_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6ac9ce289b369900a2f27ac9c5890175e208b00857c45f291531469ec296409 +size 28326 diff --git a/detail_png/Shaft_03297_title.png b/detail_png/Shaft_03297_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e33c5a07c712fdea7d82f6ed14c1c0c999fcd4d9 --- /dev/null +++ b/detail_png/Shaft_03297_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad3b60e24b1bdbec688d358555afaa41829f325aff2be02b21324c4ff2b499cd +size 30029 diff --git a/detail_png/Shaft_03298_diam.png b/detail_png/Shaft_03298_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7b070e47454fc66728b90bce01ce3722654a55b9 --- /dev/null +++ b/detail_png/Shaft_03298_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c22972cbe15342af32a9b1fbc0fdb887074f07a37ae0ba04c71c0ede96962ce +size 25611 diff --git a/detail_png/Shaft_03298_length.png b/detail_png/Shaft_03298_length.png new file mode 100644 index 0000000000000000000000000000000000000000..17e3fac0de0ef104da83c1212145fb895069a348 --- /dev/null +++ b/detail_png/Shaft_03298_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60ff534d6eef0a98619cccb438a16aef4717b9d0a97ad0ac9c00a3ab319f3b02 +size 20842 diff --git a/detail_png/Shaft_03298_title.png b/detail_png/Shaft_03298_title.png new file mode 100644 index 0000000000000000000000000000000000000000..df843a185b84f3c752c5444e652586f6bc697d02 --- /dev/null +++ b/detail_png/Shaft_03298_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38e3a96f1d9d400aabe551247026b7fe75836dc950b4ecca69b944a2ee64e849 +size 20922 diff --git a/detail_png/Shaft_03300_diam.png b/detail_png/Shaft_03300_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7f2df7d5b016ac7d63f4812c80e8488da75e208b --- /dev/null +++ b/detail_png/Shaft_03300_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b6427482742d5baf2d127ace5b6a94800a63f6d36db4915d899d21ee79d4846 +size 24019 diff --git a/detail_png/Shaft_03300_length.png b/detail_png/Shaft_03300_length.png new file mode 100644 index 0000000000000000000000000000000000000000..16bb540d50887027131b35fc0b8fa887dc71fb92 --- /dev/null +++ b/detail_png/Shaft_03300_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43194ac0cdf3577860aa1948c023b7299f6c0b946929a12c4169492ad4b815d2 +size 22679 diff --git a/detail_png/Shaft_03300_title.png b/detail_png/Shaft_03300_title.png new file mode 100644 index 0000000000000000000000000000000000000000..65c30e657af7a7cc0f0400caaa5fec0f03a336fd --- /dev/null +++ b/detail_png/Shaft_03300_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad2dfd2fafe114a017220380127db6f96247715be0a8f53fb54a5b1cb273e473 +size 36005 diff --git a/detail_png/Shaft_03301_diam.png b/detail_png/Shaft_03301_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bde235d12fe120c58fd5bdacb6596546e825c464 --- /dev/null +++ b/detail_png/Shaft_03301_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec5ccb9bf116eabef07a487dc3e1d9aef34b4b01fbe0cf72c9f8aaaed905b8bc +size 30804 diff --git a/detail_png/Shaft_03301_length.png b/detail_png/Shaft_03301_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc78ff2675eed7175b37cb8c95b3cb29b1289cec --- /dev/null +++ b/detail_png/Shaft_03301_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:632bbe03443eac5f4ec94880eb9aff1a0ac96c95287f51efc78d79ef31bd8d4e +size 35553 diff --git a/detail_png/Shaft_03301_title.png b/detail_png/Shaft_03301_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a3cd8e57f8fbd9dd8dea3bf09e77cea1c5298f4e --- /dev/null +++ b/detail_png/Shaft_03301_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebfc96833a5a8be68c62d0499c252aa27b58a24d1cafb64376c6f656e50c0bd4 +size 35623 diff --git a/detail_png/Shaft_03311_diam.png b/detail_png/Shaft_03311_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..603dfaeb8c86870c7ad33159e0f9b26e5f6fc65d --- /dev/null +++ b/detail_png/Shaft_03311_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21800b3e25addac81fee0f14f200cefc58d496b4f83f1a1e801625a9d6ee4807 +size 25053 diff --git a/detail_png/Shaft_03311_length.png b/detail_png/Shaft_03311_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4d2dbdae2f6a52b9c859f5927a4e2a49ea25289b --- /dev/null +++ b/detail_png/Shaft_03311_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32235388ebf34730346115d18bd91e7adbca90cb167fbe190507c7b075ac6be5 +size 24419 diff --git a/detail_png/Shaft_03311_title.png b/detail_png/Shaft_03311_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4381639db495aa2f77a5af19f78ca13bdc752757 --- /dev/null +++ b/detail_png/Shaft_03311_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2427e2b343367f430cb826d0b44e2b1982d69f8584182e0fc1da6985f224fe5d +size 28099 diff --git a/detail_png/Shaft_03313_diam.png b/detail_png/Shaft_03313_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2622efa33fab0e3d23628a5558df0f51a763d035 --- /dev/null +++ b/detail_png/Shaft_03313_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dad4f6d8ea376e314675b0fef00854225b8fcf3e2ed5f551e362cd91f82d9bc8 +size 35768 diff --git a/detail_png/Shaft_03313_length.png b/detail_png/Shaft_03313_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b394d980c7d5db590eabb875c047dfe22769b97e --- /dev/null +++ b/detail_png/Shaft_03313_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b704f10246cc939bb6453d8f631f289adc7775bd9aacfeb5526b821b82cdb8e +size 51616 diff --git a/detail_png/Shaft_03313_title.png b/detail_png/Shaft_03313_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0e2aea230927b2fd81ba82a9107ceb7632082b39 --- /dev/null +++ b/detail_png/Shaft_03313_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1870bfa7b6b303455176ff5fe53b41721c369f5efad76e63ab4001e2a210cd3 +size 33364 diff --git a/detail_png/Shaft_03314_diam.png b/detail_png/Shaft_03314_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..884389fb39927b3a4caad7eaff51bc4643e8ca24 --- /dev/null +++ b/detail_png/Shaft_03314_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaf87d5146c2ef2d02af2402cefab824781c7f88570cc7b91e72f81205f7ccd5 +size 29084 diff --git a/detail_png/Shaft_03314_length.png b/detail_png/Shaft_03314_length.png new file mode 100644 index 0000000000000000000000000000000000000000..82df1aa334088e7c938756332d9e8466fcd53c1e --- /dev/null +++ b/detail_png/Shaft_03314_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5322daeb5937802b16e7e42ae035ea1b53b16754b9c6c3e3bef66cddc197ed3f +size 26692 diff --git a/detail_png/Shaft_03314_title.png b/detail_png/Shaft_03314_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5e0976c1b554e397609330afd9ca2162f2828007 --- /dev/null +++ b/detail_png/Shaft_03314_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62fedbb9007842952e54e9847ae8eb19586e0df05af73103bd64d03cf87d79b8 +size 31353 diff --git a/detail_png/Shaft_03316_diam.png b/detail_png/Shaft_03316_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a2881018aa794c07bc01fd87c1e38a67e5a6339 --- /dev/null +++ b/detail_png/Shaft_03316_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a7b3ddc6f7ca25457d293d99f840ff3fa18f192c0eb0dcce126ff3c69cd4591 +size 33972 diff --git a/detail_png/Shaft_03316_length.png b/detail_png/Shaft_03316_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f04d8a38b134461b191d3d137ad41f791a10e4dd --- /dev/null +++ b/detail_png/Shaft_03316_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b17fc3bb71d106c7d1ff3728c8a545617422d08848c51ad8f29fa01272c894c0 +size 29622 diff --git a/detail_png/Shaft_03316_title.png b/detail_png/Shaft_03316_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c9eab575ef62dbd5cebe248b34a9e03aad9e767f --- /dev/null +++ b/detail_png/Shaft_03316_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce1148c1b505a40296304e1f78db6954164080f3e20644beef35fbb4f64fcef +size 30988 diff --git a/detail_png/Shaft_03320_diam.png b/detail_png/Shaft_03320_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..836f3ee6763088aea5667d23eaccaaa97caa686a --- /dev/null +++ b/detail_png/Shaft_03320_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:363c4c9b20ea559f05ba2e4877de5965e7bcab2e87d1383bdf1a58e155de3295 +size 28970 diff --git a/detail_png/Shaft_03320_length.png b/detail_png/Shaft_03320_length.png new file mode 100644 index 0000000000000000000000000000000000000000..48f03aa55214d7f16e5437e2e0f779bccbc5d29f --- /dev/null +++ b/detail_png/Shaft_03320_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6a5c450aa490b8dd0aefdccac285bc52d345cf644a064dd55d76fa71309caaf +size 24622 diff --git a/detail_png/Shaft_03320_title.png b/detail_png/Shaft_03320_title.png new file mode 100644 index 0000000000000000000000000000000000000000..da8d4e15e1b1a5296a2056548a278b828e08422d --- /dev/null +++ b/detail_png/Shaft_03320_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e9fa031bab9dec1948255d0ffe1cc4e2a4bdb3ca39eb5005e38873d92ae6dad +size 32681 diff --git a/detail_png/Shaft_03326_diam.png b/detail_png/Shaft_03326_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d0774ee696952436c08cbe721d28ac40bf509bf --- /dev/null +++ b/detail_png/Shaft_03326_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fa15152fd8aabe183919b583afa08986d403ca43808ee5f243ccfb0c37bc2a7 +size 30202 diff --git a/detail_png/Shaft_03326_length.png b/detail_png/Shaft_03326_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f03c6583fb37501f74799c80e12fe4db2038dace --- /dev/null +++ b/detail_png/Shaft_03326_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:280c830b0ed03f03ea46e814e0954418328765a62a79dc7fe32458480ab2179e +size 25487 diff --git a/detail_png/Shaft_03326_title.png b/detail_png/Shaft_03326_title.png new file mode 100644 index 0000000000000000000000000000000000000000..00bc45db5a278dfb0bd1b7d20014d24d7519e206 --- /dev/null +++ b/detail_png/Shaft_03326_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ea923fd47e9aa4bd7fcea5bbe5866265878774fe884129e9cf0dd8fa309dc65 +size 27164 diff --git a/detail_png/Shaft_03327_diam.png b/detail_png/Shaft_03327_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fb0ca5032342bcb53dc862bd636fd8aeb86b3bd3 --- /dev/null +++ b/detail_png/Shaft_03327_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:750b2c4ceea92142eafe9d06f3f0c083c30e82a5b08f78589268ba0cc1443a9b +size 30289 diff --git a/detail_png/Shaft_03327_length.png b/detail_png/Shaft_03327_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0a63af77bde0d46524a0148b80199cc2b53f8e8a --- /dev/null +++ b/detail_png/Shaft_03327_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0dd1ed51009b7ae379b861a77084120fec5c934a759d276826306e5bc56ab71 +size 30527 diff --git a/detail_png/Shaft_03327_title.png b/detail_png/Shaft_03327_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e57231d8583a4df1467ed47184ad422a463b457b --- /dev/null +++ b/detail_png/Shaft_03327_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7de7220fbbda609d27c357b790694ffb929b65e0d2d8128d8d084bbc98b3ae8 +size 32145 diff --git a/detail_png/Shaft_03329_diam.png b/detail_png/Shaft_03329_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..13a087ccecd205594c18cb03bdfef53acfad0eb7 --- /dev/null +++ b/detail_png/Shaft_03329_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4135c8a6423b0d47907420426872bdccfde986025994da88dacee360b9df02b +size 20315 diff --git a/detail_png/Shaft_03329_length.png b/detail_png/Shaft_03329_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b683ef5b2fcdc1a227220dd11e7e200a0323b022 --- /dev/null +++ b/detail_png/Shaft_03329_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfee24d8744df7ad1ccb5119990b9715ea7f984ecbc94d71218cbc68e6352e68 +size 26940 diff --git a/detail_png/Shaft_03329_title.png b/detail_png/Shaft_03329_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9a80b52c4fe86cc736c2a54af48dd01bda1dd513 --- /dev/null +++ b/detail_png/Shaft_03329_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b69eeda32abf7874c07598b68572d8a7a6d7120d3ff9880c206c31e1134f782 +size 36842 diff --git a/detail_png/Shaft_03332_diam.png b/detail_png/Shaft_03332_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cdd6af7636f1c1b06c65609b65a3cd5ed4388f5e --- /dev/null +++ b/detail_png/Shaft_03332_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d54484fde54bf417e77dab52a162f42adfcee0389e5fb9f5bc2f617d20df74a +size 19214 diff --git a/detail_png/Shaft_03332_length.png b/detail_png/Shaft_03332_length.png new file mode 100644 index 0000000000000000000000000000000000000000..106179e7f5929cf0a52ae1c65d07f3dbc5a0fc07 --- /dev/null +++ b/detail_png/Shaft_03332_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a0c2e5f79b535a67c8d704541eb66d9b721e9b919f4c51bd57630221c9de79c +size 16220 diff --git a/detail_png/Shaft_03332_title.png b/detail_png/Shaft_03332_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9f3a39c858f7052cca148e9c447000911f2eb003 --- /dev/null +++ b/detail_png/Shaft_03332_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4fb24cbe656a5f6a126aedc79ee71606f9c58794609d17cf1c90fb0370ce58a +size 18769 diff --git a/detail_png/Shaft_03335_diam.png b/detail_png/Shaft_03335_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..845da5e175b41b5b70192d026e6abb901bc5bbd3 --- /dev/null +++ b/detail_png/Shaft_03335_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20b71120e72da4c6a66b42b517d7a9893a888398cea51802c5b67479c71ce432 +size 19172 diff --git a/detail_png/Shaft_03335_length.png b/detail_png/Shaft_03335_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a33e9b1d049df6aa16c11360eea9b0e9cd0a0f2 --- /dev/null +++ b/detail_png/Shaft_03335_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:397d489aec47b9f4bac58cc2d68d238886b30fe35c9c321c93e9d559261f421b +size 16761 diff --git a/detail_png/Shaft_03335_title.png b/detail_png/Shaft_03335_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0a277a890f66d20b5f5856b37f8713afd7054da9 --- /dev/null +++ b/detail_png/Shaft_03335_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f37b0379433c306d2bad8816bb95a6a9855df6ff89bf423443a7b6ce4b4d50f0 +size 19658 diff --git a/detail_png/Shaft_03338_diam.png b/detail_png/Shaft_03338_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a58411e551ebe6375dc25dfa3bf7d07f8f51e6fd --- /dev/null +++ b/detail_png/Shaft_03338_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cfcc01d90c87331ed2a1bd39fbac04c555850ba096f58035a3c88d320cae191 +size 20578 diff --git a/detail_png/Shaft_03338_length.png b/detail_png/Shaft_03338_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d1980d8b9d22686140550c7029f1aa050c005034 --- /dev/null +++ b/detail_png/Shaft_03338_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bc27ca840f4b7aa5084c6596e193ca900bdf00220b2ffdaae74a7de3cc08d91 +size 16767 diff --git a/detail_png/Shaft_03338_title.png b/detail_png/Shaft_03338_title.png new file mode 100644 index 0000000000000000000000000000000000000000..74726111c639701661b2af658e0b3868c517ad43 --- /dev/null +++ b/detail_png/Shaft_03338_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6996807b343fafc5e0964453e3136292ab679cdb4bd77c2b9b8eae3500513095 +size 19669 diff --git a/detail_png/Shaft_03341_diam.png b/detail_png/Shaft_03341_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..563b34953b694078de43fe28b96c45e6fcdbaedd --- /dev/null +++ b/detail_png/Shaft_03341_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a8bf43308242d862486c1fb0e066c5952ebec3750c49b624918b2bbe52a7a99 +size 25260 diff --git a/detail_png/Shaft_03341_length.png b/detail_png/Shaft_03341_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e29ce96af93fcfb54a21879a2956df074884cc91 --- /dev/null +++ b/detail_png/Shaft_03341_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4c06eaef3f2127e28085365b05369066aeb72de94a6ab6102e19da5fdb75c81 +size 21717 diff --git a/detail_png/Shaft_03341_title.png b/detail_png/Shaft_03341_title.png new file mode 100644 index 0000000000000000000000000000000000000000..23bd2fc7188dce628d8ae31c981b5e08df166948 --- /dev/null +++ b/detail_png/Shaft_03341_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfa3c3d548e8349512de1531b491fe8fa7367937806ac2d60d9aa415e8b447d3 +size 23727 diff --git a/detail_png/Shaft_03343_diam.png b/detail_png/Shaft_03343_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e800b4354fdbbba8c1618fd813fdeda4dc6970ba --- /dev/null +++ b/detail_png/Shaft_03343_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a43057f86702683baa52669c60bef394a6a6cdcd44f835d575e0bcb39f57af81 +size 42564 diff --git a/detail_png/Shaft_03343_length.png b/detail_png/Shaft_03343_length.png new file mode 100644 index 0000000000000000000000000000000000000000..28eb809d904ba74ca9b0c7b8881634c4e9f89809 --- /dev/null +++ b/detail_png/Shaft_03343_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46ab05d8fed4f26acd6de12d9e4e2c1f7d6b018917e49535943c0efc7a8b845b +size 46142 diff --git a/detail_png/Shaft_03343_title.png b/detail_png/Shaft_03343_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a949b4aae620d854b5ffd86e27adaf1e909ea2e2 --- /dev/null +++ b/detail_png/Shaft_03343_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d3c1fbb48da6ce1f335f8410133e69eb7d41a93bfb220c42d6f08999ea356f1 +size 29841 diff --git a/detail_png/Shaft_03344_diam.png b/detail_png/Shaft_03344_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6b04580d1b92638189946405b2367f875bf90a65 --- /dev/null +++ b/detail_png/Shaft_03344_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:856f6a5b7e53f9be64aa0f1c03ef0b3cc77d7453404ba918266b52a6bc125e1c +size 24725 diff --git a/detail_png/Shaft_03344_length.png b/detail_png/Shaft_03344_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a403cc39f5a890e74c30544cca8a9f8bda8f49c2 --- /dev/null +++ b/detail_png/Shaft_03344_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db331008b19e9d0b47f4407032c9b6584817047708271dcdd713bb534b5a07f2 +size 18927 diff --git a/detail_png/Shaft_03344_title.png b/detail_png/Shaft_03344_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d19a6f5f0c52afc162fa055c3f221931bd40e215 --- /dev/null +++ b/detail_png/Shaft_03344_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e70a2ad735ea28662e8ad6d0a2235c93430af115049931a8e9ff274be41736e +size 16560 diff --git a/detail_png/Shaft_03353_diam.png b/detail_png/Shaft_03353_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..72acd3c8b3d44470a2f558b6971b27c01a297aa4 --- /dev/null +++ b/detail_png/Shaft_03353_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbd554139bec74b578060e8b58edb61c497b6ff4e4b78acf3f04d0c0c76bfaef +size 20088 diff --git a/detail_png/Shaft_03353_length.png b/detail_png/Shaft_03353_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4b5fb3a28a0bd46f09bbd18228f8c966f37660ed --- /dev/null +++ b/detail_png/Shaft_03353_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60034ba7b9d2969daee365712b90dd59c781a40ae07950904d4c6ab6e9498b9a +size 15135 diff --git a/detail_png/Shaft_03353_title.png b/detail_png/Shaft_03353_title.png new file mode 100644 index 0000000000000000000000000000000000000000..05bbe93c577d8404957982e5d2bba6ef73a21c08 --- /dev/null +++ b/detail_png/Shaft_03353_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d12c066558778eb9a15b8687e0f69cfaf3d5a886454eda1b18386fce51aeb68 +size 17917 diff --git a/detail_png/Shaft_03357_diam.png b/detail_png/Shaft_03357_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f2fe81f3951c94957fb048a5e700d060efb29088 --- /dev/null +++ b/detail_png/Shaft_03357_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb83db159a6e468795372b845f6cbf714f2de91e35bc8ab826b969d2d5e9eb5c +size 33578 diff --git a/detail_png/Shaft_03357_length.png b/detail_png/Shaft_03357_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6f0a4f8edc8ed513b7aa7e8d386ccefd908ca378 --- /dev/null +++ b/detail_png/Shaft_03357_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79459da941de8fa56b9fac6032ffe5508cda1354cd148c3b40543094227bd7d2 +size 35017 diff --git a/detail_png/Shaft_03357_title.png b/detail_png/Shaft_03357_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a9a673bed6d242a132b954c8f59d826510ef498 --- /dev/null +++ b/detail_png/Shaft_03357_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df260d58fbe99c74c5ad3ba20e174f50f45f03d60abfc9020c6249bbf00330de +size 35417 diff --git a/detail_png/Shaft_03359_diam.png b/detail_png/Shaft_03359_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2b75f001fcbc83c8b99918f87b7bafc515e4c19d --- /dev/null +++ b/detail_png/Shaft_03359_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d240fb9edde50f5b014ac0a01bfbc02bd827e96d58abdfbe64d1d97ca4081d0 +size 24815 diff --git a/detail_png/Shaft_03359_length.png b/detail_png/Shaft_03359_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c083ee6d2ba59b41f546fe23de2e5567de51cda --- /dev/null +++ b/detail_png/Shaft_03359_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a410c45b280bd0e333dce8c1136b61ced1c5dbb163aa1c8bc94a0f10d5f88442 +size 21290 diff --git a/detail_png/Shaft_03359_title.png b/detail_png/Shaft_03359_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b7d22b2498615bbfb9b465f486e847f2b3b6a8a6 --- /dev/null +++ b/detail_png/Shaft_03359_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f258e5c08ea8b299e16125f6355a8434d75a0bb1179b05c006c3e421fbd35de +size 20582 diff --git a/detail_png/Shaft_03362_diam.png b/detail_png/Shaft_03362_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8a20fa1bc97bf7c7c72f8ff6bff09b3f09b12387 --- /dev/null +++ b/detail_png/Shaft_03362_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:041efc8892e5fb0b642112174ebbc8e46ffdb76805f7213fb5ff7bcbdd6f5c1b +size 25043 diff --git a/detail_png/Shaft_03362_length.png b/detail_png/Shaft_03362_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d57bc891859d6d03be1ab575771ecdcbae5bebd --- /dev/null +++ b/detail_png/Shaft_03362_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d44da8793585fa76c86cfe1ea86ae71fd41ab71f4ed4d7458c778ce3d0b384f +size 19711 diff --git a/detail_png/Shaft_03362_title.png b/detail_png/Shaft_03362_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6b020d32505dde409390af4c1fe4a03ccf4d2699 --- /dev/null +++ b/detail_png/Shaft_03362_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8b70550532f3c43ab381b9ec0c322656801437db7aa2f9fc56a0d428d69fc33 +size 15767 diff --git a/detail_png/Shaft_03365_diam.png b/detail_png/Shaft_03365_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..be6f514a1a6e2953a69b580fb2acc1b9d75aa9ea --- /dev/null +++ b/detail_png/Shaft_03365_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b053aa1e247b56c0fb2d0d3b4db857eb7b50c75532588e3f2a9847b896146e16 +size 20186 diff --git a/detail_png/Shaft_03365_length.png b/detail_png/Shaft_03365_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c24f1fe51afcc7f0c5d7fa71607be9718863898 --- /dev/null +++ b/detail_png/Shaft_03365_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf6ab8f1b9b7217eaae839dc199f4dea8da64d38fc5d400dd596e9a706e56b4f +size 16563 diff --git a/detail_png/Shaft_03365_title.png b/detail_png/Shaft_03365_title.png new file mode 100644 index 0000000000000000000000000000000000000000..62b71d8c0ec9f22b785dc5913934378d425826e1 --- /dev/null +++ b/detail_png/Shaft_03365_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68c2e41f126c9302a805229764fd2f8a135170b3abcd2a98b57228f877895f99 +size 15457 diff --git a/detail_png/Shaft_03367_diam.png b/detail_png/Shaft_03367_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7fff7a8bb25c8f32bf5c6e0305024754f0268f15 --- /dev/null +++ b/detail_png/Shaft_03367_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:164917293cd53ea7ca17b8c6d869085b547e1b16a357cd8331fe06fc66959a43 +size 24848 diff --git a/detail_png/Shaft_03367_length.png b/detail_png/Shaft_03367_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b4ad3c1bd0323421f3280638b7ccce50c37e45be --- /dev/null +++ b/detail_png/Shaft_03367_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39225c20c96d191ff7366596eb5ddc4efdffe45255704f051d72620d65ef46a1 +size 22026 diff --git a/detail_png/Shaft_03367_title.png b/detail_png/Shaft_03367_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5ff6d4578d2ac34ed560ce0a8f7b2767333cea39 --- /dev/null +++ b/detail_png/Shaft_03367_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd1aad00e66464aabd7718f7e875b4afc3a720d8f18ad77af34c71e27a0c9d5f +size 18635 diff --git a/detail_png/Shaft_03369_diam.png b/detail_png/Shaft_03369_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3fb2b11c5c085eab01447e2df11bbfae56ada817 --- /dev/null +++ b/detail_png/Shaft_03369_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf01bfd84ab84e206fbe41353fa0c663f68b8a5c34f545a9a0aa8408637cc08f +size 26775 diff --git a/detail_png/Shaft_03369_length.png b/detail_png/Shaft_03369_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8ca7c0a885a60fc97b81057910bcc22dd0cd3930 --- /dev/null +++ b/detail_png/Shaft_03369_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ede42194fd9a7bfb87757cd48ab5be815289e504bceea23f0922986a3cfb4c64 +size 38612 diff --git a/detail_png/Shaft_03369_title.png b/detail_png/Shaft_03369_title.png new file mode 100644 index 0000000000000000000000000000000000000000..697d20f6312e78e576a5cac0a7e1f95783f963a1 --- /dev/null +++ b/detail_png/Shaft_03369_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e27d8464c61557926c316537410cf008c061652b92b89a29921c3b817655931 +size 33959 diff --git a/detail_png/Shaft_03373_diam.png b/detail_png/Shaft_03373_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3e760cca52cce69b2bc05dc4c8b6366e0b61aca6 --- /dev/null +++ b/detail_png/Shaft_03373_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62a8e8e7af5148564d8add85b8271c9c04d4b404eeb412c4d04df8d968609150 +size 25886 diff --git a/detail_png/Shaft_03373_length.png b/detail_png/Shaft_03373_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2c578c63597144e8a08a23bd5ebbdc5aa97508d8 --- /dev/null +++ b/detail_png/Shaft_03373_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:343bc71ac1a57596026e35de3b4c08a92350fbf6a64ee016b9794dd9809eab6d +size 30947 diff --git a/detail_png/Shaft_03373_title.png b/detail_png/Shaft_03373_title.png new file mode 100644 index 0000000000000000000000000000000000000000..73cfe6f8771294256aaee70137d8a5481292d1c4 --- /dev/null +++ b/detail_png/Shaft_03373_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e42374a7e6fa1290035b0e78b8b4cb10ce61ab8bbff7f694341f523b904b83b +size 32598 diff --git a/detail_png/Shaft_03379_diam.png b/detail_png/Shaft_03379_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2af74906fcf5a0d379c84179862b9826877bc41c --- /dev/null +++ b/detail_png/Shaft_03379_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f2b8d4cc6ba69fd81ad53212a6541b26b21a5ef84773b37bff1e813e59489c3 +size 24945 diff --git a/detail_png/Shaft_03379_length.png b/detail_png/Shaft_03379_length.png new file mode 100644 index 0000000000000000000000000000000000000000..017642db33cc6258055fc05764924bf4af84d30f --- /dev/null +++ b/detail_png/Shaft_03379_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2eca516eabb25e082b705c4334cdf9bf0501f5f89c80b60b47f8817cca24557c +size 21909 diff --git a/detail_png/Shaft_03379_title.png b/detail_png/Shaft_03379_title.png new file mode 100644 index 0000000000000000000000000000000000000000..34bd96795eca50a3fc694cfa5434c418f4f879b4 --- /dev/null +++ b/detail_png/Shaft_03379_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f557c6776f018ee829cf2dfb795ccc8b7a73285eb407beb90abcd06449508eff +size 32895 diff --git a/detail_png/Shaft_03385_diam.png b/detail_png/Shaft_03385_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..56ba317c0c74888ba70f8902424ba61133388a2b --- /dev/null +++ b/detail_png/Shaft_03385_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f50380b4adf168af8d8e11c66853ec5d1ae2688f0d863bd5311112a2ebdeca5 +size 31174 diff --git a/detail_png/Shaft_03385_length.png b/detail_png/Shaft_03385_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0b77abace8c256c3674dec9906b5e067b80b8fad --- /dev/null +++ b/detail_png/Shaft_03385_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40d13eb8dda7a42fef91de01ccafed7dd84b2a74b0ebc6a886e736ddd9c70888 +size 39433 diff --git a/detail_png/Shaft_03385_title.png b/detail_png/Shaft_03385_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cda25857a52dbde9cca245f04e5b77e312937522 --- /dev/null +++ b/detail_png/Shaft_03385_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da2b7a1267d99002ff53415230ef1ead308ca2c8c9f1ea27cbb8000e8594710f +size 30364 diff --git a/detail_png/Shaft_03387_diam.png b/detail_png/Shaft_03387_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..36a063bc7cf2aefcef47885b5dd34a512115d051 --- /dev/null +++ b/detail_png/Shaft_03387_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1049d8ebda85e1e9d281413000280bffc643a17dfa17a89d71ad1b6e6c1a695 +size 29421 diff --git a/detail_png/Shaft_03387_length.png b/detail_png/Shaft_03387_length.png new file mode 100644 index 0000000000000000000000000000000000000000..66d175fe9994db5a836b52aff90df4765c721158 --- /dev/null +++ b/detail_png/Shaft_03387_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e806416313b0bbbe7e45f8412c1e69c86342301ffefe5a5cb2d7bbb83c2786a4 +size 34444 diff --git a/detail_png/Shaft_03387_title.png b/detail_png/Shaft_03387_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0595ec20c16f007dcc080e0667deac30d39db738 --- /dev/null +++ b/detail_png/Shaft_03387_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af73b5e587cae2281ae734b26e8cce579e4946334ccba4df46f1c404c6635260 +size 32666 diff --git a/detail_png/Shaft_03389_diam.png b/detail_png/Shaft_03389_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4a1a46db6d64a83bcba7d0e99b025c7f024c7810 --- /dev/null +++ b/detail_png/Shaft_03389_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:709982d4e629a4990f1890c06bd67c34a809b1f12fd67c2d61904c9aa8a06989 +size 20449 diff --git a/detail_png/Shaft_03389_length.png b/detail_png/Shaft_03389_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eb552d7d0e5c7125f1de680748630f6b100576c7 --- /dev/null +++ b/detail_png/Shaft_03389_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dee680fc2021e1b91bae9da50cf608c67a69631c64987c4b5313bc814e9f17b +size 16019 diff --git a/detail_png/Shaft_03389_title.png b/detail_png/Shaft_03389_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ab2060df20b685b06fefbf697c8ab7dfdedb0753 --- /dev/null +++ b/detail_png/Shaft_03389_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc93b5c5cae2b5ea3a8228c7bd87285ca57113890ec6e58549f97f78ee443abc +size 14872 diff --git a/detail_png/Shaft_03391_diam.png b/detail_png/Shaft_03391_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c99e045d4d3cef54824ca67650b056079afd3024 --- /dev/null +++ b/detail_png/Shaft_03391_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8357c953ac5d5dc4c16be415c5d399be2a495147d1b49f254e2c947399ac459 +size 25213 diff --git a/detail_png/Shaft_03391_length.png b/detail_png/Shaft_03391_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ec6738233f8d7beeb614a8381eb876985ac28a89 --- /dev/null +++ b/detail_png/Shaft_03391_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b8103644f0cd84023cb18078a451d02111fc674b27f51d3cdcf4c91c2b2869e +size 21323 diff --git a/detail_png/Shaft_03391_title.png b/detail_png/Shaft_03391_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e8782da5c6669d3215ee151656f6531a88a0cbed --- /dev/null +++ b/detail_png/Shaft_03391_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9cc3d4a74d76d87dfc9567d9c88268caddd765de0fb4eb6c778b5a8f44797bb +size 24743 diff --git a/detail_png/Shaft_03392_diam.png b/detail_png/Shaft_03392_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..36f65c0ba70724e2dc78570b536d0c51c4355e9d --- /dev/null +++ b/detail_png/Shaft_03392_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a9625740478713c7a37693bb01a93c89e0c2ca78feddb4e37fd615a17a01578 +size 19786 diff --git a/detail_png/Shaft_03392_length.png b/detail_png/Shaft_03392_length.png new file mode 100644 index 0000000000000000000000000000000000000000..74f5fef007515eec771ce09de2eced135678413f --- /dev/null +++ b/detail_png/Shaft_03392_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3318c23ad11bae10ccc99fe1089b61ce90755fc3cd38310876c76a12caa0413 +size 17308 diff --git a/detail_png/Shaft_03392_title.png b/detail_png/Shaft_03392_title.png new file mode 100644 index 0000000000000000000000000000000000000000..56b4b7a7d510d307ce38f15eab1d048cad5f24ae --- /dev/null +++ b/detail_png/Shaft_03392_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2290b04de827324591067f7d5153ed76b4af8638d755b49da15e154fcc8d64b7 +size 28275 diff --git a/detail_png/Shaft_03393_diam.png b/detail_png/Shaft_03393_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b96947c9258dab450b7a2d2080f6e96b8ebaf29c --- /dev/null +++ b/detail_png/Shaft_03393_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41a98d6be7fba431db8d3d42df2b8db4844e4ec6eb4d428d6a22ed77b80c00df +size 24753 diff --git a/detail_png/Shaft_03393_length.png b/detail_png/Shaft_03393_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f8304eafbb2197aa7d79fcdba48068f491c4a1da --- /dev/null +++ b/detail_png/Shaft_03393_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:482a07912439e4750d73da49f599cc60cfe6d053e93a834224d77278533f70b3 +size 30354 diff --git a/detail_png/Shaft_03393_title.png b/detail_png/Shaft_03393_title.png new file mode 100644 index 0000000000000000000000000000000000000000..994e35c6005afd8b3b7f588cd7bbdfb9eb193d61 --- /dev/null +++ b/detail_png/Shaft_03393_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3acb640fca1d4c0735eda2247a4c49ddfba271d79a44ef48bd7c1d0f7be3e5a +size 36742 diff --git a/detail_png/Shaft_03394_diam.png b/detail_png/Shaft_03394_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94e41d2d6909faa333bdee2c7cdadb4f1767cb24 --- /dev/null +++ b/detail_png/Shaft_03394_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b53f6a2e6f95823ba69f96e78a6b806e27316727844996d61c793c331fb18a88 +size 24752 diff --git a/detail_png/Shaft_03394_length.png b/detail_png/Shaft_03394_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3f8503ee5ebdc03ae0af1156f459f8d2aa60b7f2 --- /dev/null +++ b/detail_png/Shaft_03394_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71d756fe9413d2144a65ce0d83063ee22b0575ab0520e8cf6126271f4d084758 +size 20140 diff --git a/detail_png/Shaft_03394_title.png b/detail_png/Shaft_03394_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9221b6e94b2578d14c05e8c76f4b66e9958cc59c --- /dev/null +++ b/detail_png/Shaft_03394_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:514a241b57c20c76971a59dea964d926f006b2971090a4375e41a9416af5f3ea +size 25428 diff --git a/detail_png/Shaft_03395_diam.png b/detail_png/Shaft_03395_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..12f6e462b675c7786072296674500ca5dc3f3c06 --- /dev/null +++ b/detail_png/Shaft_03395_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f787af7ef92906afd8a5c80fbb77b84f4a8fda9f4b7bf73dd1e4d7003a23cdf8 +size 29764 diff --git a/detail_png/Shaft_03395_length.png b/detail_png/Shaft_03395_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e82e0d8c42e7890a79d2bed3be1327178ca15458 --- /dev/null +++ b/detail_png/Shaft_03395_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcaf674b4c4e76bc77d0febdd66924c1699f196080961315f65674f1592fb357 +size 33249 diff --git a/detail_png/Shaft_03395_title.png b/detail_png/Shaft_03395_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e9e09034ddd9a1b761354822aff92143f3bb52a8 --- /dev/null +++ b/detail_png/Shaft_03395_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04b6395ae4c132dc2b228f7283d09e6101a767c34a85bd248f69ca4ff68e28e6 +size 30089 diff --git a/detail_png/Shaft_03396_diam.png b/detail_png/Shaft_03396_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..32510140f4c8ed2d7ed2639b9147a1d6189097c6 --- /dev/null +++ b/detail_png/Shaft_03396_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9477f9d513a8cf0f35308e10e65da38c433bb3e5f2d1c0bcefa853bb78fd9bb9 +size 25253 diff --git a/detail_png/Shaft_03396_length.png b/detail_png/Shaft_03396_length.png new file mode 100644 index 0000000000000000000000000000000000000000..deaada8d67d7b03f8e29494d58c9928a73fbb080 --- /dev/null +++ b/detail_png/Shaft_03396_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35a2211e756a419a419545c7ce7c284a386402ae23ee052c5e7e8322516115b3 +size 37767 diff --git a/detail_png/Shaft_03396_title.png b/detail_png/Shaft_03396_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6fed1975936919fe32cf44cc7779a44e3dba9387 --- /dev/null +++ b/detail_png/Shaft_03396_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23f78b09632e90c166ac60029d6a164212b9deea577fa3d1c08153aa0e231566 +size 33935 diff --git a/detail_png/Shaft_03398_diam.png b/detail_png/Shaft_03398_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0c04f1f58e3dc5345f6c31464c0b9dfa3d10ff7c --- /dev/null +++ b/detail_png/Shaft_03398_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:643294c79bae165e2fc239a5411c64276f57d4406e4009c6c55a36366e8d430b +size 24408 diff --git a/detail_png/Shaft_03398_length.png b/detail_png/Shaft_03398_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eae7bec65a3e1ffc181d970e451dfe1f4878e9ca --- /dev/null +++ b/detail_png/Shaft_03398_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e81156418c2ff8f28fe6c00308ef9bb2852106a8748b5377ce2f3ca82a9f0b65 +size 22647 diff --git a/detail_png/Shaft_03398_title.png b/detail_png/Shaft_03398_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f60410d64ac42496b1f7bbba5d6f6c50041d4975 --- /dev/null +++ b/detail_png/Shaft_03398_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab9cc65a8d5c6298f44d56b24361482ab7436a1aa4cc699a883106c45a27a1f2 +size 33664 diff --git a/detail_png/Shaft_03400_diam.png b/detail_png/Shaft_03400_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4d7e7aabdfaf058254af6ea7cd6e791e5a7566dd --- /dev/null +++ b/detail_png/Shaft_03400_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d83a18acabbbe28ec4885d9d481aa038bf6262d5565676283f016ef4169219f +size 36110 diff --git a/detail_png/Shaft_03400_length.png b/detail_png/Shaft_03400_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1b4c06fbe50a74dfc5a7e436e155a0b8e71e1d8 --- /dev/null +++ b/detail_png/Shaft_03400_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9604ab685fa55776edaa12780be5d2c44aa3446420ba4fd53b088d7bc37dd74f +size 49874 diff --git a/detail_png/Shaft_03400_title.png b/detail_png/Shaft_03400_title.png new file mode 100644 index 0000000000000000000000000000000000000000..446cf542f0824b7a97cb7a9528e3370b6db380b9 --- /dev/null +++ b/detail_png/Shaft_03400_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52b0e5d75022085ace81bc40d27bd39a33b855fcfcf72d19c57a6e0d6de35ab2 +size 36035 diff --git a/detail_png/Shaft_03401_diam.png b/detail_png/Shaft_03401_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..640e890d278e08e71d5306761849e1fd902309af --- /dev/null +++ b/detail_png/Shaft_03401_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1039c944e9f0be10aedf3ba1b9f0c9711b57c0fc472ed96eca3b29fecc29f773 +size 20362 diff --git a/detail_png/Shaft_03401_length.png b/detail_png/Shaft_03401_length.png new file mode 100644 index 0000000000000000000000000000000000000000..437fead11502a8362be5afbc930c475e5cfedfd4 --- /dev/null +++ b/detail_png/Shaft_03401_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96d44428e41f23c11b72426ba0d241cc8a2f5e41a4697f5cb866cd4b1b51640f +size 18084 diff --git a/detail_png/Shaft_03401_title.png b/detail_png/Shaft_03401_title.png new file mode 100644 index 0000000000000000000000000000000000000000..22e4e0137ec50adc62b400420233adb62e924d6f --- /dev/null +++ b/detail_png/Shaft_03401_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0b2f497db4e2e202578a6c6a19ac14874e4f40bf8f24895da3d11de9823256b +size 18674 diff --git a/detail_png/Shaft_03403_diam.png b/detail_png/Shaft_03403_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..73b158581f1eec7bb9c4845b99343d120e30b179 --- /dev/null +++ b/detail_png/Shaft_03403_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b18304237430b8cd48ae39b27c7da330b26107ca295c98e0f657e967674a804e +size 26944 diff --git a/detail_png/Shaft_03403_length.png b/detail_png/Shaft_03403_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1c765007c92695afdb09d32f1a49d73254b7021 --- /dev/null +++ b/detail_png/Shaft_03403_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52c2dfe8c6cb7b76860dc927f13a47b85d5f31a565e68bcd3d38a54b836f4937 +size 36005 diff --git a/detail_png/Shaft_03403_title.png b/detail_png/Shaft_03403_title.png new file mode 100644 index 0000000000000000000000000000000000000000..95cade6a981192c85b1ec525a3551de2003d1505 --- /dev/null +++ b/detail_png/Shaft_03403_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e27775a6c081ccab60ec463cfb2ccc63028ac3ef5c455717b2b08aa12bb38e25 +size 32730 diff --git a/detail_png/Shaft_03406_diam.png b/detail_png/Shaft_03406_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2c8e57a391e66f05b333ec5f7d9a8d8518c3fcfe --- /dev/null +++ b/detail_png/Shaft_03406_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ae1e8826a3291c50d3e041bb922833f8195053a70d51557c2cc05479ee52a56 +size 32694 diff --git a/detail_png/Shaft_03406_length.png b/detail_png/Shaft_03406_length.png new file mode 100644 index 0000000000000000000000000000000000000000..aaee3f9693782626e70f98f153ca5685db7ad9c1 --- /dev/null +++ b/detail_png/Shaft_03406_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c31c22f6178041d8cb197f89060beee1bec99afe32487b30ebbc356493420fe +size 30419 diff --git a/detail_png/Shaft_03406_title.png b/detail_png/Shaft_03406_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a783a82d7d3873b4e60f21ca450100cc1adb9a0d --- /dev/null +++ b/detail_png/Shaft_03406_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64ba68ecbdbf7e30f1adae087e18e7f950ce5467b68ec40e3bc87207d7ddc745 +size 32307 diff --git a/detail_png/Shaft_03411_diam.png b/detail_png/Shaft_03411_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..80fb76f85557ab76df5058b6606b82846ab14125 --- /dev/null +++ b/detail_png/Shaft_03411_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a901c4f5ffc819794879b1647d0c97dffee988832920dd1d0a3632951cec2052 +size 20269 diff --git a/detail_png/Shaft_03411_length.png b/detail_png/Shaft_03411_length.png new file mode 100644 index 0000000000000000000000000000000000000000..87b63d3217d088effdb01a9f25d57e57228d67d2 --- /dev/null +++ b/detail_png/Shaft_03411_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd6ba0945e760bd7195b7c6353cca20d137b4a04fe1e4fa5fa5babbcad34bcd6 +size 16718 diff --git a/detail_png/Shaft_03411_title.png b/detail_png/Shaft_03411_title.png new file mode 100644 index 0000000000000000000000000000000000000000..70de271eaab3c43d584ba8d33de96035d8361d16 --- /dev/null +++ b/detail_png/Shaft_03411_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce926bbadac718325753437de1e6790dc81441030e1f4482e15ff24bda459439 +size 15774 diff --git a/detail_png/Shaft_03412_diam.png b/detail_png/Shaft_03412_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1b3c60186c3168f9fc3b1c6698cccd03fbd28010 --- /dev/null +++ b/detail_png/Shaft_03412_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc51849d0f0fcdfc7ea1fa3c484e5d96b35aa380d0a0ebdec1ac50ca27d25c74 +size 20443 diff --git a/detail_png/Shaft_03412_length.png b/detail_png/Shaft_03412_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a2e8e54395f9d9a6a0a4a63f54420e4afb311fa9 --- /dev/null +++ b/detail_png/Shaft_03412_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c3fef4b0baab2bbe19aa04088475c72bdaf903e09acf2e7f6b247540aa58173 +size 15148 diff --git a/detail_png/Shaft_03412_title.png b/detail_png/Shaft_03412_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1cc2b4211b310a5cd85490566a0683cc41534570 --- /dev/null +++ b/detail_png/Shaft_03412_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35a199493b417a8ce3b0834e2caff95ceaaa8011e24b2e91bedfdd16274b8d83 +size 17566 diff --git a/detail_png/Shaft_03415_diam.png b/detail_png/Shaft_03415_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d5db257ac09fcbc568c7de57fa5414661c5a0e9c --- /dev/null +++ b/detail_png/Shaft_03415_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a093cf925ebf59ebdf7a8be39bb362e101a8bc0c165cc5a644b443d56f1f104c +size 20592 diff --git a/detail_png/Shaft_03415_length.png b/detail_png/Shaft_03415_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1ac2411727fec8e7714713859a29ad7ab95a4429 --- /dev/null +++ b/detail_png/Shaft_03415_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d8ed0224f820c6f1e2d80a5916a804fbf0dc44dec62a24e19a6e9d6ab4620cf +size 18115 diff --git a/detail_png/Shaft_03415_title.png b/detail_png/Shaft_03415_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4827afff35aa56eff6d53e0929433e6767d6b38f --- /dev/null +++ b/detail_png/Shaft_03415_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:303576098583e637bdd4b5049dfe53eb76ace8bc9fd741c360570ef4a50a11d6 +size 16502 diff --git a/detail_png/Shaft_03416_diam.png b/detail_png/Shaft_03416_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..806acc3b5751f042e8023da8a46db2431f27903f --- /dev/null +++ b/detail_png/Shaft_03416_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82e315a78aca506d0d1a660da263541a6368c7ebd116b52f862e5f79848cd1ee +size 28030 diff --git a/detail_png/Shaft_03416_length.png b/detail_png/Shaft_03416_length.png new file mode 100644 index 0000000000000000000000000000000000000000..07ea9c604f9226e6f8db472a1695f4064779275f --- /dev/null +++ b/detail_png/Shaft_03416_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b86b253cafae81bf2ef0866f3b8017654edff928c74a18679d3cf16926e921c +size 41157 diff --git a/detail_png/Shaft_03416_title.png b/detail_png/Shaft_03416_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6178ba54bed7f65e059de8224e48c00fe4e6c919 --- /dev/null +++ b/detail_png/Shaft_03416_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f0668987dab2e61daa8e05b57d942349ff680511a1c5e6a728eb1bf8bbc9085 +size 32328 diff --git a/detail_png/Shaft_03417_diam.png b/detail_png/Shaft_03417_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8df7dd6ee6c6ae3c81a88aaab85dad095aaf573d --- /dev/null +++ b/detail_png/Shaft_03417_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:919241532f3c29025728fd8d9fbfd4eee87204ed3e1193f2b21c1344f025d8b1 +size 24613 diff --git a/detail_png/Shaft_03417_length.png b/detail_png/Shaft_03417_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1809c83cf3c3ee555640baa755edf5e584e72e46 --- /dev/null +++ b/detail_png/Shaft_03417_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b1e9da50b3a103faff2bc166458f33f8f728186570b185cbd374f56fbb6fa9e +size 36131 diff --git a/detail_png/Shaft_03417_title.png b/detail_png/Shaft_03417_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2b85e09577080041b3904b7af54e37cc2a22133b --- /dev/null +++ b/detail_png/Shaft_03417_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b7534df1195786182a1a4f7b56c0792891e5de6f4b4ce1f43343f49c60e6f94 +size 28074 diff --git a/detail_png/Shaft_03419_diam.png b/detail_png/Shaft_03419_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3c9b5e6c32b48fe57a857da3a32afb9171035667 --- /dev/null +++ b/detail_png/Shaft_03419_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c01c616d2b3d5282dc865116c26fd7b0af81581974b877586743d9d075546d9 +size 23793 diff --git a/detail_png/Shaft_03419_length.png b/detail_png/Shaft_03419_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f7cd38fdef89c6ffac9d9242eb9901f5cbac35d --- /dev/null +++ b/detail_png/Shaft_03419_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cabf5df3c1e2f1fdde8f32fc9c7bd46f41542f16105d5ec535bb3f2d6f0fa35e +size 26823 diff --git a/detail_png/Shaft_03419_title.png b/detail_png/Shaft_03419_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ea1804daa6f6a019a4c1a3566f3d62ff93565603 --- /dev/null +++ b/detail_png/Shaft_03419_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ef19b02221c8d0ca04b50743906e2644c55d0127a4dd0ac258cb2ee8bb56633 +size 29269 diff --git a/detail_png/Shaft_03421_diam.png b/detail_png/Shaft_03421_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f30b32b6af3636fc9eb9a01f4fa5a0be709a1287 --- /dev/null +++ b/detail_png/Shaft_03421_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef10a2fb65fc29d089b8b27ec19f17451e011db38221ad168f6eb38061303ef +size 28978 diff --git a/detail_png/Shaft_03421_length.png b/detail_png/Shaft_03421_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fb227b3f0df166251a4408cfe961e81d72ce03d3 --- /dev/null +++ b/detail_png/Shaft_03421_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfab35f9ca1279c120a85a5f6908b0ddda210694c161e3480357609906315d9b +size 26233 diff --git a/detail_png/Shaft_03421_title.png b/detail_png/Shaft_03421_title.png new file mode 100644 index 0000000000000000000000000000000000000000..54484c5beedfe4da9f0ccef90541b2c8bd331380 --- /dev/null +++ b/detail_png/Shaft_03421_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6c7870d7b878c4c1b47131bc728d7910e8e294f1a97e0da2f50f399b0771170 +size 31777 diff --git a/detail_png/Shaft_03422_diam.png b/detail_png/Shaft_03422_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b442d0312a58dc7caefeadd6b92166dd5178dcfc --- /dev/null +++ b/detail_png/Shaft_03422_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:554dda235bfe877180a0595873bb564f8a2b3ff3829450edab6b39fa20b84270 +size 27814 diff --git a/detail_png/Shaft_03422_length.png b/detail_png/Shaft_03422_length.png new file mode 100644 index 0000000000000000000000000000000000000000..35390dfc37e4f19e06b7cce5d806c87cd9ea5f06 --- /dev/null +++ b/detail_png/Shaft_03422_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc9117a60ccc483d95c07fb12ded8bcff6bf61009c2669fd0175eeac0caf43f3 +size 23809 diff --git a/detail_png/Shaft_03422_title.png b/detail_png/Shaft_03422_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0cbfa25bcaa690da9dc4c51ace718f22045097e0 --- /dev/null +++ b/detail_png/Shaft_03422_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:020e595a410b9e3347f6cabd499833c59378d5c8004b61e44cc667ac10c9b1e4 +size 33897 diff --git a/detail_png/Shaft_03423_diam.png b/detail_png/Shaft_03423_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..06a1c91523b6bfb87a64f47919f56637e50c56f0 --- /dev/null +++ b/detail_png/Shaft_03423_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae0aa25d3c44849fb6bc7613330816c2fef6ff5c8d5c75f2dc287a828e525c8a +size 35947 diff --git a/detail_png/Shaft_03423_length.png b/detail_png/Shaft_03423_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f75295983a9ed619fa040ed4a10ce4a6833c6ba --- /dev/null +++ b/detail_png/Shaft_03423_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42e03302878004849aad6f38acd228c4f0313d0eaf440682de5fc46398a688c1 +size 37073 diff --git a/detail_png/Shaft_03423_title.png b/detail_png/Shaft_03423_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7d0ac2604badf53247e8ff2b7e23e0b7d4c21e3a --- /dev/null +++ b/detail_png/Shaft_03423_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de83e88b3bc70b9c544e8d3062a1691c58309cac22e120d641b580e956031fee +size 29592 diff --git a/detail_png/Shaft_03424_diam.png b/detail_png/Shaft_03424_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..28e1dc077f2ced044882cd53b4fb3dad2de66ef9 --- /dev/null +++ b/detail_png/Shaft_03424_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8803dae192aa8347189c1c99717e5288556c463794228b48a71b141a63e6f23 +size 28576 diff --git a/detail_png/Shaft_03424_length.png b/detail_png/Shaft_03424_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c158e35f759ff2aaaf4ccc0cdf3d3848576b5527 --- /dev/null +++ b/detail_png/Shaft_03424_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:588f7fdebee5825131a0e95a2eb8a478fe53f781c05f3a615aa150765558f804 +size 23787 diff --git a/detail_png/Shaft_03424_title.png b/detail_png/Shaft_03424_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5e4de09432cfbe529d8f3f55bb1719617642d3b8 --- /dev/null +++ b/detail_png/Shaft_03424_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ae0338ab9aa25ae827966118d1a3b4f65ea65362406b84b7d6920967d96b848 +size 27395 diff --git a/detail_png/Shaft_03428_diam.png b/detail_png/Shaft_03428_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..30f6f2d20b23bf0d724afb2d7502608a528f8c65 --- /dev/null +++ b/detail_png/Shaft_03428_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c9693adabca29d163551f7752f75c1880ae6b6f724aaa000142e8d2869df880 +size 28301 diff --git a/detail_png/Shaft_03428_length.png b/detail_png/Shaft_03428_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c6e00e8a4597e5474e730e2c4dc17df896da3d1b --- /dev/null +++ b/detail_png/Shaft_03428_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66b1c68b8a7d5ac6b1dae43ff294ceaa0afdc342f99b51665edd95bfda3b2805 +size 33749 diff --git a/detail_png/Shaft_03428_title.png b/detail_png/Shaft_03428_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f74663e9158b62e992eca0d4a3231f979f9d6144 --- /dev/null +++ b/detail_png/Shaft_03428_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ed3ddafd3bc8f2b15ea8c6908429f415f8487ddf26f7578c640c96ce9027c8b +size 36153 diff --git a/detail_png/Shaft_03430_diam.png b/detail_png/Shaft_03430_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2d3f0dca24d38b27c42fa2cb36c6109fe0a226ea --- /dev/null +++ b/detail_png/Shaft_03430_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eaed68a32be697364f44300c4aee757892ee1f665dacff4d999d1980156e27c7 +size 32120 diff --git a/detail_png/Shaft_03430_length.png b/detail_png/Shaft_03430_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eb07cafa96a0635a29d17879d7fc22442c49777a --- /dev/null +++ b/detail_png/Shaft_03430_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb48212e41e98c3c77f218bd3bf7fb5b98b8a5a3627cca2b41f3318f0a6a59ad +size 30351 diff --git a/detail_png/Shaft_03430_title.png b/detail_png/Shaft_03430_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b9d7e4b878cf3709bad2bdd2639e68c31b98d3a1 --- /dev/null +++ b/detail_png/Shaft_03430_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22c5cff1e2a8cfbcba61ba8ae0c903326ebc061b5cef1a3eb4c0c9c6080c3b09 +size 34210 diff --git a/detail_png/Shaft_03433_diam.png b/detail_png/Shaft_03433_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a4391e17d7d7a223191825968b06c4340543ba9b --- /dev/null +++ b/detail_png/Shaft_03433_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:556fe3920379b5ffda91cb5468c6103d18ce66648367b42272dc17c10a88d7a6 +size 20131 diff --git a/detail_png/Shaft_03433_length.png b/detail_png/Shaft_03433_length.png new file mode 100644 index 0000000000000000000000000000000000000000..eda7696bfee7a0acec22288dba72eb557bd78485 --- /dev/null +++ b/detail_png/Shaft_03433_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be3eefaff06a571fd93d1f4d43b7d7e6c1799a169c6e1f22323fc423b363f235 +size 13381 diff --git a/detail_png/Shaft_03433_title.png b/detail_png/Shaft_03433_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ba851ffe9529347b86311581017024e4b9159335 --- /dev/null +++ b/detail_png/Shaft_03433_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5af491af1d44e8e45bca492c72ae1b8705be55b80e938b088f4b0870dfc6b482 +size 20563 diff --git a/detail_png/Shaft_03438_diam.png b/detail_png/Shaft_03438_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..af7ccf37220b53fccfddc464b91ce588e6affcd0 --- /dev/null +++ b/detail_png/Shaft_03438_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6431e2511699516856fffe9934279f9e701096c3b7fcca07d5e577e073e5cb3 +size 19957 diff --git a/detail_png/Shaft_03438_length.png b/detail_png/Shaft_03438_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c41110cd34017a8d6a5f53f21556321742bd7466 --- /dev/null +++ b/detail_png/Shaft_03438_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a03aa51102cbd370ba8c709cca81cd0b4cd46d44b572988eeef68b94fee16e33 +size 18238 diff --git a/detail_png/Shaft_03438_title.png b/detail_png/Shaft_03438_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eb67e8ca931ecaa56f0cbb1b683f23d3d10a6979 --- /dev/null +++ b/detail_png/Shaft_03438_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0d6b1ed6c1b8a45268f32d540cb3bd70bc8cb2219ba9468ce72d8c8dca90c33 +size 25626 diff --git a/detail_png/Shaft_03440_diam.png b/detail_png/Shaft_03440_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4c91c9671b5246d1a52e274f376d2fb888a39ad8 --- /dev/null +++ b/detail_png/Shaft_03440_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14f90c88e5ab66b7d38a8009dcbc1e9eb8788d7ef09f0839435c6c28bdc9b085 +size 30322 diff --git a/detail_png/Shaft_03440_length.png b/detail_png/Shaft_03440_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0ba08f9a8ff28270584b7c82df1049c413602322 --- /dev/null +++ b/detail_png/Shaft_03440_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76195e0aba93b06832543d77d44e1e74a1839f1a11b06da7c896e8e3c4dea1d0 +size 29754 diff --git a/detail_png/Shaft_03440_title.png b/detail_png/Shaft_03440_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2fe2a5c325377251e620f8513768a2a7263ecf1a --- /dev/null +++ b/detail_png/Shaft_03440_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96ad2350b2402896ecdfc3392433b95c0820020c096923094da767f6c808c2fd +size 34765 diff --git a/detail_png/Shaft_03443_diam.png b/detail_png/Shaft_03443_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..614fe00ec076b3f984c543dedee0a06efae454d1 --- /dev/null +++ b/detail_png/Shaft_03443_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8689dedebb29f10929fb18f19b00f2a49a67468466f0eee89eecaaacc94453d1 +size 18833 diff --git a/detail_png/Shaft_03443_length.png b/detail_png/Shaft_03443_length.png new file mode 100644 index 0000000000000000000000000000000000000000..96cd8638710ac5a53fc85c46f31b82cdf6576a9e --- /dev/null +++ b/detail_png/Shaft_03443_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c321e09a58aa7260e6333b2d60c2f98fd4f37ae0244cf366832252c557091a8a +size 22795 diff --git a/detail_png/Shaft_03443_title.png b/detail_png/Shaft_03443_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8a0b15acd19d94fc2220de3aedaeba8daa0f3525 --- /dev/null +++ b/detail_png/Shaft_03443_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d966e28926518980427f35ec37358b056cf5f3e6ec57b868e015e7567188ad6 +size 34971 diff --git a/detail_png/Shaft_03449_diam.png b/detail_png/Shaft_03449_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..346a55db838eeb18e6376e4afcb0c61e5dd90ddc --- /dev/null +++ b/detail_png/Shaft_03449_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd6f299a57e3d3d322dcb2311c6ea78aecee0ca9e63f1f7c46cff780d82b6a1b +size 19768 diff --git a/detail_png/Shaft_03449_length.png b/detail_png/Shaft_03449_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b9b507910a750527cd877bc0c32b0f29a9ca5423 --- /dev/null +++ b/detail_png/Shaft_03449_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e9b4e8a2ac445c2fa4652c1f34d127f3c935b9cc8fdb7eef7cb2257a8fe350e +size 18177 diff --git a/detail_png/Shaft_03449_title.png b/detail_png/Shaft_03449_title.png new file mode 100644 index 0000000000000000000000000000000000000000..225032b2fc45870db2b6c671ba52d449da619368 --- /dev/null +++ b/detail_png/Shaft_03449_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4da1120625c15d9f85212f6854a4aa4e8ba324336a79cd89d377518066aacfd2 +size 23438 diff --git a/detail_png/Shaft_03451_diam.png b/detail_png/Shaft_03451_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bebe7016095d26d68ba121237459b78624b90757 --- /dev/null +++ b/detail_png/Shaft_03451_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab99332a6f52c8595f9a83da8b809615a9ee2814fed8ad2476171e1201dcde4f +size 24261 diff --git a/detail_png/Shaft_03451_length.png b/detail_png/Shaft_03451_length.png new file mode 100644 index 0000000000000000000000000000000000000000..71b8e2d0090f243502165555cb73af2b2e5ffb91 --- /dev/null +++ b/detail_png/Shaft_03451_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3dadc4ac2c0b1b7e257926361d9f136d99b1a537b3d6bfc05c07b34c408d689 +size 25600 diff --git a/detail_png/Shaft_03451_title.png b/detail_png/Shaft_03451_title.png new file mode 100644 index 0000000000000000000000000000000000000000..23db299a8bfb1168b82a525bf12c6675c9a06220 --- /dev/null +++ b/detail_png/Shaft_03451_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6723f32abb7e9056894e860c43540d17d1d4b1cd45e3d0e7a57eed229fe34174 +size 28385 diff --git a/detail_png/Shaft_03453_diam.png b/detail_png/Shaft_03453_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94fb293cf0d6e22998a1de218098cd578e82cc73 --- /dev/null +++ b/detail_png/Shaft_03453_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3238dc18977d2f62325cf3a83d4ef0df766168a35a45168fff9a6c02768e05c2 +size 23175 diff --git a/detail_png/Shaft_03453_length.png b/detail_png/Shaft_03453_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3b8965be4d5af719d48b9685220d0fa516d04c84 --- /dev/null +++ b/detail_png/Shaft_03453_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9746375956adca2e7bd3e1d6d5dff394d877a16e5ecd98db231ea6bd62b4e26 +size 27690 diff --git a/detail_png/Shaft_03453_title.png b/detail_png/Shaft_03453_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1e00fa07a7c2aa9cec794ed28f21dc53f0ab626c --- /dev/null +++ b/detail_png/Shaft_03453_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93e15e3d66bd9464f5efbb83f9d1cc0148f350a8c540cf037faaf8991ba00812 +size 30132 diff --git a/detail_png/Shaft_03458_diam.png b/detail_png/Shaft_03458_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9b201ff841a78d73dfe6fb097f267865ed913e3c --- /dev/null +++ b/detail_png/Shaft_03458_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9e0eab5590ddca069fdec1c1b4b50af3fa269eaaa036b6148c8382cb2f42abe +size 35646 diff --git a/detail_png/Shaft_03458_length.png b/detail_png/Shaft_03458_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4a67dd026ec6561bb45352a8b3df72373d71564f --- /dev/null +++ b/detail_png/Shaft_03458_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8943f34d711ebc425871bb6c81d7da9814df09ab00a50d52d96ed3fa9e19bfdf +size 31948 diff --git a/detail_png/Shaft_03458_title.png b/detail_png/Shaft_03458_title.png new file mode 100644 index 0000000000000000000000000000000000000000..24daf0826fa1ea440084cfbcc6131799908bf227 --- /dev/null +++ b/detail_png/Shaft_03458_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d2b044b48343a93340a69289e4654e471716109a05f33b222cf56c8c6d556be +size 35792 diff --git a/detail_png/Shaft_03461_diam.png b/detail_png/Shaft_03461_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bf4802f1a162d4faf644d8b0b197a05ebc3a55b4 --- /dev/null +++ b/detail_png/Shaft_03461_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86a4b9a2056e12b14d3de87d29be52ef1515b05e8f2e54c24de9bd53d2bb6355 +size 34151 diff --git a/detail_png/Shaft_03461_length.png b/detail_png/Shaft_03461_length.png new file mode 100644 index 0000000000000000000000000000000000000000..527319dd9961b2960804bd1101da33462dcf8007 --- /dev/null +++ b/detail_png/Shaft_03461_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d42d7f670b9dd09cada8e0ef37da619444eaf806cf6c919b713cb2d1d69bf89 +size 44467 diff --git a/detail_png/Shaft_03461_title.png b/detail_png/Shaft_03461_title.png new file mode 100644 index 0000000000000000000000000000000000000000..03d245ae9ce40d5d4c8b8d9d2506c651175f377f --- /dev/null +++ b/detail_png/Shaft_03461_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75cfb4771c774dd7563df5be506ec25accf66b34e993ba37cd7e8c6dcdb134fd +size 29223 diff --git a/detail_png/Shaft_03465_diam.png b/detail_png/Shaft_03465_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e07f1e1b0cd2e7d82131664cf9df02b39dfa93d2 --- /dev/null +++ b/detail_png/Shaft_03465_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2adc679ae17c45582c7f2791292b23c2b207d1be52fd0286bed660a46689c513 +size 18637 diff --git a/detail_png/Shaft_03465_length.png b/detail_png/Shaft_03465_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b4edaf86662e6764ea125ac238d538ad73b83a59 --- /dev/null +++ b/detail_png/Shaft_03465_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f49be16b5fc25af900878c5e19b273b14115704805b988f29934a63393c51668 +size 14746 diff --git a/detail_png/Shaft_03465_title.png b/detail_png/Shaft_03465_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d219a84870b7fbf86ef8d475565dc5184d89f991 --- /dev/null +++ b/detail_png/Shaft_03465_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:832a5cdbb03e05cbee9c55cd8ee62bace229e5b7e86ec06f29782c4de272dea8 +size 14841 diff --git a/detail_png/Shaft_03467_diam.png b/detail_png/Shaft_03467_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6ffba5e9753bf3590aa1e4b45666d37b9f455c5a --- /dev/null +++ b/detail_png/Shaft_03467_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edaf020ff89967b03468aefd72dd8e637b7df6e8859323cbb5646f796c68ccbb +size 30454 diff --git a/detail_png/Shaft_03467_length.png b/detail_png/Shaft_03467_length.png new file mode 100644 index 0000000000000000000000000000000000000000..edfe2cab0424fa0596364519f001f189d363bb48 --- /dev/null +++ b/detail_png/Shaft_03467_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc09ca72eb88a4aef586a4ad9e78025c84a717211d120ac4f7bf7b052081fb85 +size 29123 diff --git a/detail_png/Shaft_03467_title.png b/detail_png/Shaft_03467_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5a5c9228b408067c3aabf7a342756ae1bb77f931 --- /dev/null +++ b/detail_png/Shaft_03467_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:340aa0b9191a4f138d360c0511551ece583ed2102df14c4025e635134f43dd09 +size 31927 diff --git a/detail_png/Shaft_03469_diam.png b/detail_png/Shaft_03469_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..81c55b3b75749fceba0f54784a69cf61b5fb9256 --- /dev/null +++ b/detail_png/Shaft_03469_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c7ad931e879642b1d13d46a8704ab1732af02035c0a8a4875de5dec8a46e1f3 +size 34315 diff --git a/detail_png/Shaft_03469_length.png b/detail_png/Shaft_03469_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e0cf506706d6cf720a33ed00454cbd34efc39078 --- /dev/null +++ b/detail_png/Shaft_03469_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b392db866f2e47ac14c8d30fed19b234fec6dce54adf06bca36ea7cb7e0795da +size 33258 diff --git a/detail_png/Shaft_03469_title.png b/detail_png/Shaft_03469_title.png new file mode 100644 index 0000000000000000000000000000000000000000..453ef4ff83bcdee4d0c5516260fd80f189d254d8 --- /dev/null +++ b/detail_png/Shaft_03469_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed16d7afed28f6657f661eb1ba64972dd8d6c4fb7ce425a74e8fba43da3d8a10 +size 29749 diff --git a/detail_png/Shaft_03470_diam.png b/detail_png/Shaft_03470_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..70d2955431f12cfacdb04409ce97040f0f060bb1 --- /dev/null +++ b/detail_png/Shaft_03470_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:826239960dec0f1f9313955b79716999d90db7c86c2371e80fcf89737c7157a0 +size 39386 diff --git a/detail_png/Shaft_03470_length.png b/detail_png/Shaft_03470_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9d61c65caa1c9c6eaf33332d81dae99301f8b8cf --- /dev/null +++ b/detail_png/Shaft_03470_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:912f61be9085daced31fda2ed69c49dd560a4767ddfd9a89b10c107638d8eafc +size 35752 diff --git a/detail_png/Shaft_03470_title.png b/detail_png/Shaft_03470_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b14921409c27b962c2fd5e10395f7ead82dbcd0d --- /dev/null +++ b/detail_png/Shaft_03470_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00a4dacc0c5cef7f48d4f5a28a4455afc31ef59b55611d350214a333125847ba +size 28574 diff --git a/detail_png/Shaft_03482_diam.png b/detail_png/Shaft_03482_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..530516878b4c13fd684d7d774746c5142287bdd1 --- /dev/null +++ b/detail_png/Shaft_03482_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:564a03524247ca9973517fe64f5f50fdd2e75a3a352e66ba23a496d80653db61 +size 38003 diff --git a/detail_png/Shaft_03482_length.png b/detail_png/Shaft_03482_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c065dbf4e9cfdfc7debc6cb222f8e15bea953eff --- /dev/null +++ b/detail_png/Shaft_03482_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7227312089ce850cea555601ea1ae08b9220974f3a639b837fb25080e044851 +size 39327 diff --git a/detail_png/Shaft_03482_title.png b/detail_png/Shaft_03482_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aa05e4933ea37b09d3fddc96dfe64e49ee45453c --- /dev/null +++ b/detail_png/Shaft_03482_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86022f2d267061945f3fe2e483d88efb3a5397749711a9c46cb753c9f65c6791 +size 32490 diff --git a/detail_png/Shaft_03484_diam.png b/detail_png/Shaft_03484_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..880c88dcf3ae1d26539cb33b29e3dda688614e54 --- /dev/null +++ b/detail_png/Shaft_03484_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c6122ff6102d7743e63afd5713cf53c66fd014e5a53a081ed0bb29d42c1e030 +size 36382 diff --git a/detail_png/Shaft_03484_length.png b/detail_png/Shaft_03484_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f06954da1679630783635247c3839202fb041acf --- /dev/null +++ b/detail_png/Shaft_03484_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2ba49c16b83bdea78c4d5d6377415f03f0a17c7730266c8f6293580296dd79f +size 29911 diff --git a/detail_png/Shaft_03484_title.png b/detail_png/Shaft_03484_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1c2896a8a32729090ecf93bdb97ecf78401f7233 --- /dev/null +++ b/detail_png/Shaft_03484_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9a14d83d8f872783c9127c48b429cc23a006754f282578cc048bd4906465723 +size 28839 diff --git a/detail_png/Shaft_03491_diam.png b/detail_png/Shaft_03491_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4507020d07ea46c969a8722546ca05cb2004bc91 --- /dev/null +++ b/detail_png/Shaft_03491_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d842ecb45279046a4420f5b34803136888f65d7ab0bcdc38c614122fb95e297 +size 20636 diff --git a/detail_png/Shaft_03491_length.png b/detail_png/Shaft_03491_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5505217fd6e7513b283b66b52ae48a1743f4e411 --- /dev/null +++ b/detail_png/Shaft_03491_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b008f7bb9301387103afc124f8e90ed9388d501c6c7059296e0daf1e97fb216 +size 14998 diff --git a/detail_png/Shaft_03491_title.png b/detail_png/Shaft_03491_title.png new file mode 100644 index 0000000000000000000000000000000000000000..22e0483cb5abc7604a416cc626e50d10f545f7a4 --- /dev/null +++ b/detail_png/Shaft_03491_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1356359f5591a814a43a4867a315354aa6a052116f6b9e62d8238d43477140bd +size 18029 diff --git a/detail_png/Shaft_03493_diam.png b/detail_png/Shaft_03493_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5407298b3e79af267b75cab70bfeb92d2378d3e6 --- /dev/null +++ b/detail_png/Shaft_03493_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b598b5e3f7864a6d7ca7e3e18e261e4439bfeb65f11691f6fadad26fb0d46ae3 +size 33557 diff --git a/detail_png/Shaft_03493_length.png b/detail_png/Shaft_03493_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7667172d9de34b6b7ddbf7c39a89f278f0274132 --- /dev/null +++ b/detail_png/Shaft_03493_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:211ff7f27bbfb4c9394797e1f4170206d8ee26b9080898391ee58a245a19288c +size 26725 diff --git a/detail_png/Shaft_03493_title.png b/detail_png/Shaft_03493_title.png new file mode 100644 index 0000000000000000000000000000000000000000..773311fdc45fdbec01b3602c996124546a67365e --- /dev/null +++ b/detail_png/Shaft_03493_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de3c7774b2805ccf235a8b1a63325170ab2ed5d1487503da3a09d28f444fe486 +size 25496 diff --git a/detail_png/Shaft_03497_diam.png b/detail_png/Shaft_03497_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..54be585abd25078e1537f55a5a85cffb1435c9ba --- /dev/null +++ b/detail_png/Shaft_03497_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efaf001716ec120323716f3031e4a1e023537980f5e040dfd4050bbd20e3ddd3 +size 20003 diff --git a/detail_png/Shaft_03497_length.png b/detail_png/Shaft_03497_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f29c6c789bd1e70b0f77606fd10929c800fa5429 --- /dev/null +++ b/detail_png/Shaft_03497_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:733d97327156c93a0cd2bef607ca24d69e632aa92d0fa933e1984236724b7b88 +size 17545 diff --git a/detail_png/Shaft_03497_title.png b/detail_png/Shaft_03497_title.png new file mode 100644 index 0000000000000000000000000000000000000000..898d689d7cce112b25000a1f86577ec6250a107a --- /dev/null +++ b/detail_png/Shaft_03497_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93215a07bec2c3c1aa7c693f5cabf9b9837e57610eada76463c3add3f48c3cad +size 26822 diff --git a/detail_png/Shaft_03499_diam.png b/detail_png/Shaft_03499_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c2063544724b1528cba9678d215817482a97b1b --- /dev/null +++ b/detail_png/Shaft_03499_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e6a22ec542d0c8ed479dad5ad5894db25accab118df6b74579054d0cebe32a +size 30089 diff --git a/detail_png/Shaft_03499_length.png b/detail_png/Shaft_03499_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0015116fc87ed80e16aa7cf14a4234eed0bcaac1 --- /dev/null +++ b/detail_png/Shaft_03499_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20d27f0cb797d48440e914ebb6bb53502487ba56774f6e3fb83f21faaf771801 +size 43354 diff --git a/detail_png/Shaft_03499_title.png b/detail_png/Shaft_03499_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1d62c12bdb7614cf56710d9a7638aa7bbfb8ddf0 --- /dev/null +++ b/detail_png/Shaft_03499_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56389ca450c2105eff85d52f88f7afba620a29419cf0c0416a7db3f9938042f4 +size 33345 diff --git a/detail_png/Shaft_03501_diam.png b/detail_png/Shaft_03501_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2bdf9fa9ff85041ea4bc9ea0f7b3acc918336e0a --- /dev/null +++ b/detail_png/Shaft_03501_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ddec26c70c8885086069847234115ac875b64d27c0bce010e4b89018efb49e0 +size 20449 diff --git a/detail_png/Shaft_03501_length.png b/detail_png/Shaft_03501_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2ed86a2e1b946b56eea46051ea7b6bbd7d0c9c24 --- /dev/null +++ b/detail_png/Shaft_03501_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dde113dda6263fc848796f9d0f681b8fbee1034968a5290f85cb7e0c9e0098c +size 15435 diff --git a/detail_png/Shaft_03501_title.png b/detail_png/Shaft_03501_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f21a44c6b4a18c76afa15df5106cf782d7c2801b --- /dev/null +++ b/detail_png/Shaft_03501_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c69556e499897508882ce6e33ef3e0679bfc13cdbaa9b26bc887c874b25f9738 +size 22168 diff --git a/detail_png/Shaft_03502_diam.png b/detail_png/Shaft_03502_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..14aea6be145179fc7350ad8924550e55befa3f78 --- /dev/null +++ b/detail_png/Shaft_03502_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4129b843be1993597bd493a2ea13e770ab48d548b226b529184c4a86510af98f +size 25185 diff --git a/detail_png/Shaft_03502_length.png b/detail_png/Shaft_03502_length.png new file mode 100644 index 0000000000000000000000000000000000000000..085b57724827f7f60cd15496de9232288ce253af --- /dev/null +++ b/detail_png/Shaft_03502_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1be25c8a8b3f9f460df3d3894f36bf1ac845ec44053e46f13f4837dc17aabd8 +size 17591 diff --git a/detail_png/Shaft_03502_title.png b/detail_png/Shaft_03502_title.png new file mode 100644 index 0000000000000000000000000000000000000000..754644e61729668a27f3220634a93e1448ba5023 --- /dev/null +++ b/detail_png/Shaft_03502_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fb5a9e3ee20733a92af762887d3b5be5a1e1eb5b055a7347b321a5f814662d2 +size 16172 diff --git a/detail_png/Shaft_03505_diam.png b/detail_png/Shaft_03505_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..46b643464bb444b03d5a7d659c1da3a150f2fd79 --- /dev/null +++ b/detail_png/Shaft_03505_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b68d7fd1c031e01a445fb98f1eb98c987d8cd957e84f92da707aee9c01864c6a +size 26577 diff --git a/detail_png/Shaft_03505_length.png b/detail_png/Shaft_03505_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b9760fa2e8bbd319a848a70e9bff2b78d9ab43ab --- /dev/null +++ b/detail_png/Shaft_03505_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:176a53585d104af8536d2d65290ee51c038983aa0b0bd85d3686bbdb582b1648 +size 37689 diff --git a/detail_png/Shaft_03505_title.png b/detail_png/Shaft_03505_title.png new file mode 100644 index 0000000000000000000000000000000000000000..120670e5f3cca3738eebb57564ec5ecdfc68b971 --- /dev/null +++ b/detail_png/Shaft_03505_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7c8847fe40044572a85627ef341d91a018c4318d42fb9afb11c07b0dc0fb744 +size 32916 diff --git a/detail_png/Shaft_03511_diam.png b/detail_png/Shaft_03511_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..61284699a9e9bb185807ec5f2865c0684919c496 --- /dev/null +++ b/detail_png/Shaft_03511_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea6589fbfe9048720ffccb1693c1345e639f29a3e02045fddfde47edf376e4ed +size 29888 diff --git a/detail_png/Shaft_03511_length.png b/detail_png/Shaft_03511_length.png new file mode 100644 index 0000000000000000000000000000000000000000..769fb2cce5aa6ccda3699d88ead25b1a0cce70e7 --- /dev/null +++ b/detail_png/Shaft_03511_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6f37e1ef5326b3839b37a7e2905a527927baa5685cf8a48b0a66c69d37ddb2c +size 42700 diff --git a/detail_png/Shaft_03511_title.png b/detail_png/Shaft_03511_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ced25f4aee075bb969980b1c3da7d2e312f74ea6 --- /dev/null +++ b/detail_png/Shaft_03511_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:520fdc3ac521b5d8de9bcb833aadd9c587cd390d2478d3ba4812cd89d916cbf9 +size 31452 diff --git a/detail_png/Shaft_03514_diam.png b/detail_png/Shaft_03514_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3bd700b0286f961c29607a16499aa176a841d1aa --- /dev/null +++ b/detail_png/Shaft_03514_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f354f09829ffaa39996cfef37156d177e442be3e6161837c101d19c3b36097f5 +size 24733 diff --git a/detail_png/Shaft_03514_length.png b/detail_png/Shaft_03514_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a0bf7a8852dbcfb163d0b5dbb060fa392de09922 --- /dev/null +++ b/detail_png/Shaft_03514_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1defbea77d9a83166274d28c187067caf9535f8a54c87c02dddbdc08c666539f +size 19500 diff --git a/detail_png/Shaft_03514_title.png b/detail_png/Shaft_03514_title.png new file mode 100644 index 0000000000000000000000000000000000000000..58c394cf892425ec5969bd4223c6d653c20044c4 --- /dev/null +++ b/detail_png/Shaft_03514_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf56715965e2a51091969704d8390ce1d936b70c300ac67e30e574f332d75c60 +size 18812 diff --git a/detail_png/Shaft_03517_diam.png b/detail_png/Shaft_03517_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f25d3445c71602fe073866a0812bbc87e1244127 --- /dev/null +++ b/detail_png/Shaft_03517_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24e2d8619dbe7be4f7f7a4348dfd983442749f2438b6aece35176d405f62d5e4 +size 26349 diff --git a/detail_png/Shaft_03517_length.png b/detail_png/Shaft_03517_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6b42bb3eb2b82d3ee98cdfad34e529fbc61cbf03 --- /dev/null +++ b/detail_png/Shaft_03517_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:149120731432c754cc8af00196f482da5a96613d7c9d274e344d655a377d174e +size 26351 diff --git a/detail_png/Shaft_03517_title.png b/detail_png/Shaft_03517_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a0144947403955b7cced715bcc7ed17f03e89d7c --- /dev/null +++ b/detail_png/Shaft_03517_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d68d7de0278e60be11606d2c9c4444a1116053a5b7e7d00a68f85998dc0e022 +size 34496 diff --git a/detail_png/Shaft_03518_diam.png b/detail_png/Shaft_03518_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e835231fec7a56570b0aa400f9b1a9ef64949e82 --- /dev/null +++ b/detail_png/Shaft_03518_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59820997b84f006f00b6ab740ac3a3428fb36bbb387e29f69763dc52b5985d78 +size 23846 diff --git a/detail_png/Shaft_03518_length.png b/detail_png/Shaft_03518_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a2268fec78abf3fbcde1221c73bd4f49f70f351b --- /dev/null +++ b/detail_png/Shaft_03518_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87e8f4c532b5fa6fad18fa3dbb86c839f7a3f15af0ba241c48e0892d265c04cc +size 20962 diff --git a/detail_png/Shaft_03518_title.png b/detail_png/Shaft_03518_title.png new file mode 100644 index 0000000000000000000000000000000000000000..503cbe859ef79e8d2ca8d7059559d6f56a25bf20 --- /dev/null +++ b/detail_png/Shaft_03518_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec2df74047a20ed05ba96e36111f983e906aaf4e35c887215c5188bd98a296fa +size 27074 diff --git a/detail_png/Shaft_03523_diam.png b/detail_png/Shaft_03523_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..db5ef7f918a7a7b4bde2b3d3f284beb0050ce938 --- /dev/null +++ b/detail_png/Shaft_03523_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bda7a2ea4a81eb2adb4ce7aec79e8ae4ffb7cf53cbaa51bdefa69d88829e4fd +size 25412 diff --git a/detail_png/Shaft_03523_length.png b/detail_png/Shaft_03523_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5d466e428fd9382d230e46a7fd029983bb45577b --- /dev/null +++ b/detail_png/Shaft_03523_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5343e7ebe4c079fd5e52bf359b1515d400a80f9568575078a8640973b7d62a37 +size 24101 diff --git a/detail_png/Shaft_03523_title.png b/detail_png/Shaft_03523_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dd1d8b9187ac50ad16a7f0fac5515e59bc1e06ec --- /dev/null +++ b/detail_png/Shaft_03523_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e7ab44c4072eb9f277292be9303aac83b88d90d2aed6c1781459dec38896a36 +size 28297 diff --git a/detail_png/Shaft_03527_diam.png b/detail_png/Shaft_03527_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1ab3007f26ab3de0feaebb6ddae60f9e0b56dd48 --- /dev/null +++ b/detail_png/Shaft_03527_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:276113203e3e62c7c3410eef6247eb4749acf5b782fbe732c8af096dccd13ddf +size 35751 diff --git a/detail_png/Shaft_03527_length.png b/detail_png/Shaft_03527_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ff0f8a028d10e1d11aaeff3ab3e65d661905afaf --- /dev/null +++ b/detail_png/Shaft_03527_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99248a0f89d87ab005536db9bba93cb8ed83c090bc0798d8b1a224a1f4a7cdac +size 32009 diff --git a/detail_png/Shaft_03527_title.png b/detail_png/Shaft_03527_title.png new file mode 100644 index 0000000000000000000000000000000000000000..354f47d665b0bbdaf36af69fdcbd19276c51af6c --- /dev/null +++ b/detail_png/Shaft_03527_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ea94f045a898bb5a748af9f32acc84a5d7894dd6b460a10d2606075115d3b5f +size 29882 diff --git a/detail_png/Shaft_03528_diam.png b/detail_png/Shaft_03528_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97afc5005e06832e2528c088440032e62192bca7 --- /dev/null +++ b/detail_png/Shaft_03528_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e212813daa16534f0c1e634dfa06eb80baecda7302af8be6ceabd382ea28865 +size 29696 diff --git a/detail_png/Shaft_03528_length.png b/detail_png/Shaft_03528_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b2816642c08825cee073588c7f885cfc6e55464b --- /dev/null +++ b/detail_png/Shaft_03528_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5bad2d02bf8a9ca08e8b03b135d0e43c113f8eafd474b5860d004aebe7c597f9 +size 27445 diff --git a/detail_png/Shaft_03528_title.png b/detail_png/Shaft_03528_title.png new file mode 100644 index 0000000000000000000000000000000000000000..03efcafcbfa0495f0d66690c0746b2446a8195f9 --- /dev/null +++ b/detail_png/Shaft_03528_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91e63d27b51683dbeef2c0695885bb1a5873bf08dc4edfbfb60b6fb5b45d39a2 +size 29668 diff --git a/detail_png/Shaft_03535_diam.png b/detail_png/Shaft_03535_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a90b49f0b8103d3136b23dd900bce7a2c8cf768e --- /dev/null +++ b/detail_png/Shaft_03535_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb684aab1f4c095dc851e2c94423a72d6ce2387cefcc6b9d6eec71b9cce23830 +size 23566 diff --git a/detail_png/Shaft_03535_length.png b/detail_png/Shaft_03535_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5921515fc2c07c05c2b87f6319b8bd92f4d07bd6 --- /dev/null +++ b/detail_png/Shaft_03535_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54779d64ca961794bc77c01a4d37c901e8c300a75bb67b3ec2b38f5fd73a8acb +size 32843 diff --git a/detail_png/Shaft_03535_title.png b/detail_png/Shaft_03535_title.png new file mode 100644 index 0000000000000000000000000000000000000000..20eed9ccfed6c2a3ba30d552ff851b7be763a543 --- /dev/null +++ b/detail_png/Shaft_03535_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f29109414a53285accb1eb21c2895030733d816e1bfeccfa4948d65846910a2b +size 33272 diff --git a/detail_png/Shaft_03537_diam.png b/detail_png/Shaft_03537_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4ec627f9d4d1ed5d720ca4ca00d83c5c77093455 --- /dev/null +++ b/detail_png/Shaft_03537_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82053eec524e64886c0537bc1fc966d7b822a292e4c6223544c283966399842c +size 29040 diff --git a/detail_png/Shaft_03537_length.png b/detail_png/Shaft_03537_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b77af357e09a0b018eccd2e321be527a61fda6e7 --- /dev/null +++ b/detail_png/Shaft_03537_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cdfc1c04c0591b467b07f897effac1c23b83c98c628b5a2289dedd7b67124f0 +size 23666 diff --git a/detail_png/Shaft_03537_title.png b/detail_png/Shaft_03537_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2ed609eddcf1e4f304d6c6dfa3b23e4bbda9e5ef --- /dev/null +++ b/detail_png/Shaft_03537_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63ffe15ff5826e18f470cc1ac90f4ab5d301231805cb5d14b7e12786ee8cab45 +size 16505 diff --git a/detail_png/Shaft_03541_diam.png b/detail_png/Shaft_03541_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3b85b511d02286035f511fc3d435cbb313a95a3c --- /dev/null +++ b/detail_png/Shaft_03541_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5537504570add09c12a1483119f126db3be923e36316e953344640569b0ac99 +size 30892 diff --git a/detail_png/Shaft_03541_length.png b/detail_png/Shaft_03541_length.png new file mode 100644 index 0000000000000000000000000000000000000000..44a558b32379c4683393c3962c6a1d0a6df153d9 --- /dev/null +++ b/detail_png/Shaft_03541_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da1064064b228f40cbe7af931bfc1d790a43601000d6f0802e717279fd46f2df +size 42936 diff --git a/detail_png/Shaft_03541_title.png b/detail_png/Shaft_03541_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eabdc50ebd7144ed2d0b2dd6bbdd0fccdbbe67f8 --- /dev/null +++ b/detail_png/Shaft_03541_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b3ebe81c028baadd518c3761e040a36d20d845d42cc85ec107c4980e90b0c79 +size 31792 diff --git a/detail_png/Shaft_03544_diam.png b/detail_png/Shaft_03544_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bfe6b83b3c5bb03de87f552cae7367f3f5b87c6c --- /dev/null +++ b/detail_png/Shaft_03544_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a0f3f0f54a3fc7393f5afb2a0d76b71fa58fbbea614546f584de02240e96fa4 +size 24980 diff --git a/detail_png/Shaft_03544_length.png b/detail_png/Shaft_03544_length.png new file mode 100644 index 0000000000000000000000000000000000000000..43724fcea55e57ae408f858609c6834c42baca5b --- /dev/null +++ b/detail_png/Shaft_03544_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80e33838015b5aada772bd04748573d5610957010786532107f7d4a04257a0b5 +size 20849 diff --git a/detail_png/Shaft_03544_title.png b/detail_png/Shaft_03544_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e33a7977209183e184f30e48713e1982b04f4efe --- /dev/null +++ b/detail_png/Shaft_03544_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01a67977b6a84b75298509d5af2b0c0deab20cbe74690a4939fa57de2190aac7 +size 23257 diff --git a/detail_png/Shaft_03545_diam.png b/detail_png/Shaft_03545_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d7e5f0e0679fa23b823d8597a834b9ee2f4498e2 --- /dev/null +++ b/detail_png/Shaft_03545_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcd03ca56bb87bdec190656e9174c6e535618731ba0c79f1d00a3d4fcb0803e6 +size 19329 diff --git a/detail_png/Shaft_03545_length.png b/detail_png/Shaft_03545_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5dd2b730a449924711f7ec80c08c0d62358d4638 --- /dev/null +++ b/detail_png/Shaft_03545_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd0a5fc1deaa4ee2e802e852e4604a7d5f602bf41dd220277098952ecc0995fe +size 15065 diff --git a/detail_png/Shaft_03545_title.png b/detail_png/Shaft_03545_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bd5a91ec52a513c25ad677d129c105e32dd1955a --- /dev/null +++ b/detail_png/Shaft_03545_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:911971a621ed9b4862ed6270a7e33cef1fca7582817dc4cbdcbcf3f41a1e18d9 +size 16461 diff --git a/detail_png/Shaft_03546_diam.png b/detail_png/Shaft_03546_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..50fea511427c379d83b6f2d3d93cd7d3b446e922 --- /dev/null +++ b/detail_png/Shaft_03546_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1afb79e051cb6e8fa606b4ea4b06a7e8dd350d7bb416d35d1be5cf2b7f49ef6f +size 31933 diff --git a/detail_png/Shaft_03546_length.png b/detail_png/Shaft_03546_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9a0ec589d8aabd5e01e08edd673162a30935910f --- /dev/null +++ b/detail_png/Shaft_03546_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd8f6f2cfcae6f8fad5011d5309a3099948ce696df025317a1f5e6002ccd077c +size 35735 diff --git a/detail_png/Shaft_03546_title.png b/detail_png/Shaft_03546_title.png new file mode 100644 index 0000000000000000000000000000000000000000..71490382b97b30d4f76e42984fe725cbe53b14c0 --- /dev/null +++ b/detail_png/Shaft_03546_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e824a9b1bf94d1f31e343a6d4d207f0ee479ff43ec98fa701a6ca0ecc0406f37 +size 35864 diff --git a/detail_png/Shaft_03549_diam.png b/detail_png/Shaft_03549_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6264fdbbb2328ae1eb500d7f7d316e9e0fe8cd7b --- /dev/null +++ b/detail_png/Shaft_03549_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78120cbd32e961619af19700b14c17ba5570563f4890a9563ee2ff3ae7d3e8df +size 25985 diff --git a/detail_png/Shaft_03549_length.png b/detail_png/Shaft_03549_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b20ead4c5e63e838ea9fe275eef2162b372082c7 --- /dev/null +++ b/detail_png/Shaft_03549_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53c9fc87d67c0bfdbd74d070fba14fde40d7e28788d13bccfe3d1185bcda7ca9 +size 26639 diff --git a/detail_png/Shaft_03549_title.png b/detail_png/Shaft_03549_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b2f673e40efe96be19bb56fdb40f624a6541b960 --- /dev/null +++ b/detail_png/Shaft_03549_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9df55ac75b45f0ef91a6f8f1412467c1e2eb440dd81b4f88993bc61605bc8b1c +size 35821 diff --git a/detail_png/Shaft_03551_diam.png b/detail_png/Shaft_03551_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..35f00ffd91be5b7040ae6fba04a7fb0315521924 --- /dev/null +++ b/detail_png/Shaft_03551_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:718b0819d61b51d1815e74e3d42af090933bc37289b2e7a3766e17293d0721fe +size 19318 diff --git a/detail_png/Shaft_03551_length.png b/detail_png/Shaft_03551_length.png new file mode 100644 index 0000000000000000000000000000000000000000..20bb14a7c05380bfd266a33a181ebd1fb104aec4 --- /dev/null +++ b/detail_png/Shaft_03551_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9776493bf7667bf969eef27a9a5879ed5ad4803020e7d651e9cbed5442c9d49 +size 16680 diff --git a/detail_png/Shaft_03551_title.png b/detail_png/Shaft_03551_title.png new file mode 100644 index 0000000000000000000000000000000000000000..67b82d78ae7f7634d7c03867b3c909a09fe771c5 --- /dev/null +++ b/detail_png/Shaft_03551_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b956cf213202b0aeaf642a29a584abccba3183ba00fd54fa8551d2ffbe1e3c26 +size 16560 diff --git a/detail_png/Shaft_03557_diam.png b/detail_png/Shaft_03557_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aa8fc06af620252e087f97a28e3a9b771d8a807a --- /dev/null +++ b/detail_png/Shaft_03557_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5a2d07db10c06c07a9fe1655efa340e5dfc59e64dda923f075ddf299bbbe622 +size 24601 diff --git a/detail_png/Shaft_03557_length.png b/detail_png/Shaft_03557_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0c5d0c4cd5df6f4ce7d86d6ddbd2e7fdba8f77fa --- /dev/null +++ b/detail_png/Shaft_03557_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3afe83459de4af8fb1733cba99ad7709ed73df9e0115d6f74707e1203847ac12 +size 28097 diff --git a/detail_png/Shaft_03557_title.png b/detail_png/Shaft_03557_title.png new file mode 100644 index 0000000000000000000000000000000000000000..19d4720a2e9429a0b9d626f62b2cf877111a54d1 --- /dev/null +++ b/detail_png/Shaft_03557_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d9684c0e6d85ecec0184381f893483db3b3c1c6b2a611e7ec44e7aded04b973 +size 29148 diff --git a/detail_png/Shaft_03566_diam.png b/detail_png/Shaft_03566_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cc87dbf5f753e5a83e6a464cb4a7885ad161a21d --- /dev/null +++ b/detail_png/Shaft_03566_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2818bc482974d7cfda226d587e4f35b18ef319bec11a1696ef2789fa953648c0 +size 33899 diff --git a/detail_png/Shaft_03566_length.png b/detail_png/Shaft_03566_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ff5a59c3b1575d3089e5a2bb7806eea8f6f8b24b --- /dev/null +++ b/detail_png/Shaft_03566_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:908147f9c083384039fbb65d163b8da9314f52ca9e40826198982368d7fed72b +size 35511 diff --git a/detail_png/Shaft_03566_title.png b/detail_png/Shaft_03566_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a2315b55e3b78ba13fb04a9acd556d0b3489fc3d --- /dev/null +++ b/detail_png/Shaft_03566_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3ee707eacac389098556a32a5a18b27d0870563df72c35235066c02de79c50f +size 33176 diff --git a/detail_png/Shaft_03569_diam.png b/detail_png/Shaft_03569_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ebbe284f396b92e86e8b374f2225ebaa86412ddb --- /dev/null +++ b/detail_png/Shaft_03569_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55cc7300332d78cf662d82ba8a7a9ffc1271dc51729b7ef35e464b616dc26fe8 +size 25917 diff --git a/detail_png/Shaft_03569_length.png b/detail_png/Shaft_03569_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3f8dfdc03e67f28b4e7a4b8dd0e02faea02228f0 --- /dev/null +++ b/detail_png/Shaft_03569_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e823aa249c81e8f4a47de1f0f9fa8715e22721c498a23e7008a81a655c07c3de +size 28364 diff --git a/detail_png/Shaft_03569_title.png b/detail_png/Shaft_03569_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5b566e15606676606728044a9b597c590bb5988b --- /dev/null +++ b/detail_png/Shaft_03569_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53d70a6fb39ce3282d9941a6f8de13de2821d5f0a66d93f4a66f06237962f202 +size 33445 diff --git a/detail_png/Shaft_03575_diam.png b/detail_png/Shaft_03575_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2e9d7bb838547e284538ec3e3f787456277e225f --- /dev/null +++ b/detail_png/Shaft_03575_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82adb511c3687da5f2ef191519dad3046a88fed21f3f634deac376761ce3e9d9 +size 30367 diff --git a/detail_png/Shaft_03575_length.png b/detail_png/Shaft_03575_length.png new file mode 100644 index 0000000000000000000000000000000000000000..157b93acd2c1bc9db7efd2e2efadc89869a781eb --- /dev/null +++ b/detail_png/Shaft_03575_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d502551bca3d14303be61a52246c8ea2e7208e5585169e870409ca4058673004 +size 36553 diff --git a/detail_png/Shaft_03575_title.png b/detail_png/Shaft_03575_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aa1ca284a1d5af3297b9a8cf9038dd0dcd6fcb82 --- /dev/null +++ b/detail_png/Shaft_03575_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:626270334db4270e4290a03fd6faa58a77e20bf21ffe01945700323c73acf7a0 +size 29904 diff --git a/detail_png/Shaft_03578_diam.png b/detail_png/Shaft_03578_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5720afc18eb4570cb372c5b7828ebd62d1bcc1c1 --- /dev/null +++ b/detail_png/Shaft_03578_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e0153ae3abaabbf2510e9c982be59667f132cd53519bc18c04f00a511273e72 +size 19157 diff --git a/detail_png/Shaft_03578_length.png b/detail_png/Shaft_03578_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5ded8379525c63df3316faea4a9d7932a1e7def2 --- /dev/null +++ b/detail_png/Shaft_03578_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e512d3ac6333f72f4208315dd762e82d5c6140a42b915db080116e4479a42df5 +size 17267 diff --git a/detail_png/Shaft_03578_title.png b/detail_png/Shaft_03578_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3a042ae41aedee78370244a377f3d800cc282462 --- /dev/null +++ b/detail_png/Shaft_03578_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e421dc50fd47521f1f60271b4e3c72b78f133ca32251d5938c45be60f25230e1 +size 22200 diff --git a/detail_png/Shaft_03587_diam.png b/detail_png/Shaft_03587_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ed54b1f71aa8d9a4ca58ff4f3874e9b61aedd786 --- /dev/null +++ b/detail_png/Shaft_03587_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86a48938bc6762b1b7b9a3040f71972246db4b828ff25448da80313fb1c67a96 +size 30724 diff --git a/detail_png/Shaft_03587_length.png b/detail_png/Shaft_03587_length.png new file mode 100644 index 0000000000000000000000000000000000000000..950b3bc11aaff2802a51d6b20788f9dd905bcb80 --- /dev/null +++ b/detail_png/Shaft_03587_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9584849aa957b00996a7cf653815314f5eb600dad67aae996588198b266579f +size 44433 diff --git a/detail_png/Shaft_03587_title.png b/detail_png/Shaft_03587_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ec29a91283e3b3c7c4cb850cdcc2de4578188391 --- /dev/null +++ b/detail_png/Shaft_03587_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5eab685cc0b385ea4b9b216a742ad0459921500c78aeda6465b21932b5b07db4 +size 33647 diff --git a/detail_png/Shaft_03591_diam.png b/detail_png/Shaft_03591_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5026179caecdd5fae14933a53df3eb2251cd003b --- /dev/null +++ b/detail_png/Shaft_03591_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c9122273fac5a79889dc454f728209047525c7b7c6f255a691b1ab96d907268 +size 19888 diff --git a/detail_png/Shaft_03591_length.png b/detail_png/Shaft_03591_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f171e11ff2f5258c5bfffa0d806cdbd69f06d753 --- /dev/null +++ b/detail_png/Shaft_03591_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:388f9da9e6d0d8148ee28c4e7b11b15666f1d840cb0653b321968764be158fec +size 16811 diff --git a/detail_png/Shaft_03591_title.png b/detail_png/Shaft_03591_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e865bc6fd13e454295e29dffe5b6c6f4429e48c6 --- /dev/null +++ b/detail_png/Shaft_03591_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:571ec5a519dd7843cdce0a25571375f628884d30dd9b826c948eedb25447ebe3 +size 16816 diff --git a/detail_png/Shaft_03595_diam.png b/detail_png/Shaft_03595_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..be41f45f67e38a942d96cb2eb5d58986c2caf90c --- /dev/null +++ b/detail_png/Shaft_03595_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43d03b6152a4a1d3f6cafb01183780bb031a6edd5cd8ec1ef6fa409ae2d44511 +size 23995 diff --git a/detail_png/Shaft_03595_length.png b/detail_png/Shaft_03595_length.png new file mode 100644 index 0000000000000000000000000000000000000000..297d2053434d89b742d4c7548ade065e5d4c889b --- /dev/null +++ b/detail_png/Shaft_03595_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a9d775ed0e8ed135bdda9caf0350d2568a01e1cff0623c918d9df9a8bf95c68 +size 18951 diff --git a/detail_png/Shaft_03595_title.png b/detail_png/Shaft_03595_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f45663b2761a2a9546421f357a3925aac1b66408 --- /dev/null +++ b/detail_png/Shaft_03595_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:deb64c41dd4144ed2b2cebbff8a7a68b16148ea97b0b4d258f212b2c84a20fab +size 19169 diff --git a/detail_png/Shaft_03601_diam.png b/detail_png/Shaft_03601_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7e02dfbac665520abd1b48f1ac1410e784e6ddbf --- /dev/null +++ b/detail_png/Shaft_03601_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef6604295967198eadae23cd785773badee50c7ff09bd514a217bee1bff0fcd4 +size 20393 diff --git a/detail_png/Shaft_03601_length.png b/detail_png/Shaft_03601_length.png new file mode 100644 index 0000000000000000000000000000000000000000..067795bcfd8316c61b40c4bc2a88616f091c358b --- /dev/null +++ b/detail_png/Shaft_03601_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89b0bb0b0532a98b256013766d492cfdcc7cfc3ba22211d2ce4f1894bba87e43 +size 18143 diff --git a/detail_png/Shaft_03601_title.png b/detail_png/Shaft_03601_title.png new file mode 100644 index 0000000000000000000000000000000000000000..883dc78257c90640be78ed24d28902b813f872b1 --- /dev/null +++ b/detail_png/Shaft_03601_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe23c4732d5af2e642236af932cc905cb757d0aaf786de4bcccbd74ec1579c21 +size 32035 diff --git a/detail_png/Shaft_03603_diam.png b/detail_png/Shaft_03603_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f529329ef11bfcb1cf5b2d494111482338cd53ca --- /dev/null +++ b/detail_png/Shaft_03603_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f701f3140d1bb17b92426735b39f15c06c0bbcf60c18d869cbc358be3d274a0 +size 31945 diff --git a/detail_png/Shaft_03603_length.png b/detail_png/Shaft_03603_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f668b6c2f4a5283bd8e54aa1f63f8e231ecc85b5 --- /dev/null +++ b/detail_png/Shaft_03603_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cab3cd3437d80cec8776a4e8e87d32db21793d36afc11be8ec968097d2fc4a95 +size 46962 diff --git a/detail_png/Shaft_03603_title.png b/detail_png/Shaft_03603_title.png new file mode 100644 index 0000000000000000000000000000000000000000..15e49c4952592f58134a8e40e7c4fc4b519f0d97 --- /dev/null +++ b/detail_png/Shaft_03603_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5351f7e29a29dce4660d0f1aaff8a3dff7302a97cb5fcd9278103ed241c7d86d +size 32043 diff --git a/detail_png/Shaft_03612_diam.png b/detail_png/Shaft_03612_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..38a4220bad924aba9abe5d9c01b0b947665e4e46 --- /dev/null +++ b/detail_png/Shaft_03612_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b6a8a5f696abd12da3cf9406f4fb4cb5a2f7d433f9301d5bf40c184d61d7bad +size 31607 diff --git a/detail_png/Shaft_03612_length.png b/detail_png/Shaft_03612_length.png new file mode 100644 index 0000000000000000000000000000000000000000..690c13ff7ee605ba1f8a4a7b25f3d966326a9e1c --- /dev/null +++ b/detail_png/Shaft_03612_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc4e180224a34b22b27a4ea45cefdad670efc71b27e54d7192f02b5a085fd498 +size 35068 diff --git a/detail_png/Shaft_03612_title.png b/detail_png/Shaft_03612_title.png new file mode 100644 index 0000000000000000000000000000000000000000..80602c9419365100de90cefad6841b87d1489b61 --- /dev/null +++ b/detail_png/Shaft_03612_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5acdc53e960c9127197f237dfaefe6f4b0622c84672b36f4d7dc5c8840471f30 +size 32345 diff --git a/detail_png/Shaft_03620_diam.png b/detail_png/Shaft_03620_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e45486653757eb3289ae6db4808cba2f7292e803 --- /dev/null +++ b/detail_png/Shaft_03620_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:196bd36129340adce7b225e03c49ca5b6358d7d97b7594dcdee6de4a7a22d6a7 +size 33635 diff --git a/detail_png/Shaft_03620_length.png b/detail_png/Shaft_03620_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f4a21490fb74823b841cab3d10ccb4f0bcb09cc7 --- /dev/null +++ b/detail_png/Shaft_03620_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab7b11bcd2ef691b382adc33222402557c6f2e60f3a95c600752a0c35246e7ed +size 26171 diff --git a/detail_png/Shaft_03620_title.png b/detail_png/Shaft_03620_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7ce71d77e1e7452e5d95b58ef41a793141320010 --- /dev/null +++ b/detail_png/Shaft_03620_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1121c678e7594fe08fc73f9681ae2e640d2a4bced58d6fd0dd4144c5a0b57419 +size 15742 diff --git a/detail_png/Shaft_03624_diam.png b/detail_png/Shaft_03624_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c56bb3bb660edf01188a630176b38809a3670967 --- /dev/null +++ b/detail_png/Shaft_03624_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ae75f8589b72d099ced630187a01ad873cc4eaeb9a782d6d9a0ca3637885c7a +size 20691 diff --git a/detail_png/Shaft_03624_length.png b/detail_png/Shaft_03624_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0a5f6287b887bf3d18833df2050296c20b0b6071 --- /dev/null +++ b/detail_png/Shaft_03624_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f46a311b6f929817c56c5ce2e5b7e7d5b65fbda72f823f725fbb60a28094a3c +size 16555 diff --git a/detail_png/Shaft_03624_title.png b/detail_png/Shaft_03624_title.png new file mode 100644 index 0000000000000000000000000000000000000000..09e786933bea966212901a288aaaf225d43f35af --- /dev/null +++ b/detail_png/Shaft_03624_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53fd232561de08f6b95fe5f2d1ff0bf048a098d25d903ab65af7ab316e43661a +size 18719 diff --git a/detail_png/Shaft_03625_diam.png b/detail_png/Shaft_03625_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..41aa93a54f2de0c87ebc4a18df8b66723746134e --- /dev/null +++ b/detail_png/Shaft_03625_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa5acabbece288ce3479d1ec275f032fe9d5c77e3906e0b41119c44077ffcd5a +size 19941 diff --git a/detail_png/Shaft_03625_length.png b/detail_png/Shaft_03625_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4e176ff489c4d5f79dc12148e23cfeaf0f04a36f --- /dev/null +++ b/detail_png/Shaft_03625_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4ba79ec7f8991f11112435b060e48d28f27e081895bf7b965914d84bdb2f8ff +size 20239 diff --git a/detail_png/Shaft_03625_title.png b/detail_png/Shaft_03625_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d2c0720ee008200bfd725760acb548fbc16239a9 --- /dev/null +++ b/detail_png/Shaft_03625_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea8df81374c6de8a67df8b5f9da6960c5c3b5b4d85bf2423fa29dc53491c35c3 +size 32888 diff --git a/detail_png/Shaft_03627_diam.png b/detail_png/Shaft_03627_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..890599eec8f709eeec8cf2f06bf4cab99cbb5f6e --- /dev/null +++ b/detail_png/Shaft_03627_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86b5c7548cb0f44422cdb46f9471fe3593623d482d97b7ef4b0912753c25b8a7 +size 37572 diff --git a/detail_png/Shaft_03627_length.png b/detail_png/Shaft_03627_length.png new file mode 100644 index 0000000000000000000000000000000000000000..19608e67eaa568e92fd8cf3fe9f68cf1a7f7ca57 --- /dev/null +++ b/detail_png/Shaft_03627_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bd9e36a2b963d29daec448557e4012e9f8c27c71d4f15905ffdff734d73f321 +size 52980 diff --git a/detail_png/Shaft_03627_title.png b/detail_png/Shaft_03627_title.png new file mode 100644 index 0000000000000000000000000000000000000000..15054d12513af1dfb60a0bf3eb752ff8b5f19d1d --- /dev/null +++ b/detail_png/Shaft_03627_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61e1eae1a74a9845d416084f0c21629c91bdb42cc3622018163b64e73b6bd2df +size 33192 diff --git a/detail_png/Shaft_03629_diam.png b/detail_png/Shaft_03629_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6b2189fe185247ab1f810fb9b2c7c386a0c1e150 --- /dev/null +++ b/detail_png/Shaft_03629_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ef81fecdc14cf7319b8ee0f6987dcca0424c1b6af61630419d1525e3b044a5a +size 22934 diff --git a/detail_png/Shaft_03629_length.png b/detail_png/Shaft_03629_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f92dc36abb9405c33d3750f3e4764b126f107bd --- /dev/null +++ b/detail_png/Shaft_03629_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a88365eddf68fe071993dd61733c49d458f0916505da8081f9604ee1e1db67b +size 23801 diff --git a/detail_png/Shaft_03629_title.png b/detail_png/Shaft_03629_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bc3eb9f53fcfd552b7d203e6dcae84b9d2a7fbdf --- /dev/null +++ b/detail_png/Shaft_03629_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03707f69f01173bc465ce129dc1778315f35da4131f81846412ae27f314712ba +size 30910 diff --git a/detail_png/Shaft_03630_diam.png b/detail_png/Shaft_03630_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..023a4c5d4b2018bd795ca9245c8372fffd6d9508 --- /dev/null +++ b/detail_png/Shaft_03630_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9bed5e411f6411c834e230b92ce6bf51a3d8e32f099f9508d19b8dd907c8ac5 +size 28112 diff --git a/detail_png/Shaft_03630_length.png b/detail_png/Shaft_03630_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3d29b9fb6a8993e343b1847911c3c9afcf7097e7 --- /dev/null +++ b/detail_png/Shaft_03630_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21ac803fff6ce9902c436f6afeff6341cd1a34d9a6538b310430a6951a300133 +size 28234 diff --git a/detail_png/Shaft_03630_title.png b/detail_png/Shaft_03630_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ddc09942a9ee173325309c338a109aa2363ec572 --- /dev/null +++ b/detail_png/Shaft_03630_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d81e0ee495299f630fbbd435d4ece177c711f518e5cfb7d867674284caf16d0c +size 30196 diff --git a/detail_png/Shaft_03631_diam.png b/detail_png/Shaft_03631_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..560067adfec6e548bb5b3842cc65d848558d54d6 --- /dev/null +++ b/detail_png/Shaft_03631_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b932518fb933ac3cb9f090dbb2a3a4ed88ab09455d0462749550763e8e47d21 +size 25629 diff --git a/detail_png/Shaft_03631_length.png b/detail_png/Shaft_03631_length.png new file mode 100644 index 0000000000000000000000000000000000000000..32b97b5f109e9271aed8637117fe9ea298881c4a --- /dev/null +++ b/detail_png/Shaft_03631_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b5237501729e0846f0ab04a7230176752115b5a5d3c778ee805211eada08f6d +size 18956 diff --git a/detail_png/Shaft_03631_title.png b/detail_png/Shaft_03631_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7c435f1b755ba7fcfe735547ab9a4cab6455e87d --- /dev/null +++ b/detail_png/Shaft_03631_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ea1c8d1685dc9084d850f92832e1605630e34806b15afeccbb28d984af7d877 +size 20600 diff --git a/detail_png/Shaft_03634_diam.png b/detail_png/Shaft_03634_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..173b3a76270d639f32367c4fd4a62ed2e2841631 --- /dev/null +++ b/detail_png/Shaft_03634_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8c9817bd29b74b3122ba612de0519f556c823220c3d588a6a09f54c6abfc26a +size 36302 diff --git a/detail_png/Shaft_03634_length.png b/detail_png/Shaft_03634_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29f71fdaf9ba60e7e189d5dcb78aaa3b3bd98347 --- /dev/null +++ b/detail_png/Shaft_03634_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc65e1b1b50ee3d0ef5cbcbf07df03ebed2f49534c8f58c5716f37d358bb39a9 +size 36857 diff --git a/detail_png/Shaft_03634_title.png b/detail_png/Shaft_03634_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8dc904dd6b915e852c7bd2a628747d84db65cf9e --- /dev/null +++ b/detail_png/Shaft_03634_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc469f0f09c3ecb0f47e11c25a656ad949eb768bce9cc5f1699a4e36111560d0 +size 32638 diff --git a/detail_png/Shaft_03636_diam.png b/detail_png/Shaft_03636_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0407c217d1fc64be0a44fe559b2f2d6b698c51d6 --- /dev/null +++ b/detail_png/Shaft_03636_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbefa63a896e7a4fd3d4ac49a22dfc8865ee30b92de6c44e5e9878b48bb60f20 +size 33887 diff --git a/detail_png/Shaft_03636_length.png b/detail_png/Shaft_03636_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c208c5a82aa2068452364ac99ec6058a2b792eea --- /dev/null +++ b/detail_png/Shaft_03636_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e87a3bc87958d92052c5093e2fe3f71fb970913c5c1b53a9222fda0950a09e1 +size 34271 diff --git a/detail_png/Shaft_03636_title.png b/detail_png/Shaft_03636_title.png new file mode 100644 index 0000000000000000000000000000000000000000..226c0da65a624dc014958d93b4f9c2e32943423b --- /dev/null +++ b/detail_png/Shaft_03636_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b5b96ad55f7588890983a4666fed4411d16fb2a1b95d420e978426246d1d1fc +size 33730 diff --git a/detail_png/Shaft_03638_diam.png b/detail_png/Shaft_03638_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..38835775bd27aee6ed81ed1f1e6b479b8cbfd7a0 --- /dev/null +++ b/detail_png/Shaft_03638_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20a60364111ba4920593c3963e0240d92fa4dd4486545ad1ef937f65605994cf +size 18637 diff --git a/detail_png/Shaft_03638_length.png b/detail_png/Shaft_03638_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2be91ced047445701452213b973ec5fa069102e1 --- /dev/null +++ b/detail_png/Shaft_03638_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:179349c1c47166dc86b15d2aefa23716222df17ce7dd1b411d798084a315ac23 +size 14866 diff --git a/detail_png/Shaft_03638_title.png b/detail_png/Shaft_03638_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6cd39056a36e362b9d353c0926a481e1bd9c1796 --- /dev/null +++ b/detail_png/Shaft_03638_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f268554fb39db2f83e2d3fee3668091dee3e3b80547530cb0b802dec6250933b +size 15901 diff --git a/detail_png/Shaft_03644_diam.png b/detail_png/Shaft_03644_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..42b6a4ec35d428284d701d8c1fbd8c9a31c6d187 --- /dev/null +++ b/detail_png/Shaft_03644_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5cddb357f84ee4f4b683b2b4838e04b0aa405e29b10e1278cc491fccdce320d0 +size 37243 diff --git a/detail_png/Shaft_03644_length.png b/detail_png/Shaft_03644_length.png new file mode 100644 index 0000000000000000000000000000000000000000..97fc677822e51d2f8d73de2f342897cf53ce65e4 --- /dev/null +++ b/detail_png/Shaft_03644_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2dfb4cbcd9b3119ff695e20ac8cd5edf65f7ae4132f696ca080ef1992ccba2d1 +size 51721 diff --git a/detail_png/Shaft_03644_title.png b/detail_png/Shaft_03644_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4a99df5999bbf336940b19dd4fc5fa52e032df42 --- /dev/null +++ b/detail_png/Shaft_03644_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e46af27acecd5414f39e67cd47494c808bb5b56522e359e635bcd12ce5a054a +size 35803 diff --git a/detail_png/Shaft_03647_diam.png b/detail_png/Shaft_03647_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5a66fe95e5e306b187ec5e0f3e1462486851ba24 --- /dev/null +++ b/detail_png/Shaft_03647_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6e0b0fda8f243d2a84e280e20e3cd904ad5deb4822fa9c449c2117ccf3d0d26 +size 35502 diff --git a/detail_png/Shaft_03647_length.png b/detail_png/Shaft_03647_length.png new file mode 100644 index 0000000000000000000000000000000000000000..04c493ed6462f6c81eef0966da93aad8a17c0601 --- /dev/null +++ b/detail_png/Shaft_03647_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:224a564919fcf6bac4a21022bd05343701c755948d39036925357ffe446604dc +size 50942 diff --git a/detail_png/Shaft_03647_title.png b/detail_png/Shaft_03647_title.png new file mode 100644 index 0000000000000000000000000000000000000000..961791221be4ee02ffd0f85719ae4e9a5f573817 --- /dev/null +++ b/detail_png/Shaft_03647_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffe72277de5f1f6c0959f2824f280383bae7753e642d845d0e06aa9530d85aa7 +size 33155 diff --git a/detail_png/Shaft_03655_diam.png b/detail_png/Shaft_03655_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..02d7859952a08394a79048a44036c1887ee8b586 --- /dev/null +++ b/detail_png/Shaft_03655_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f5be8923eb3ae53d521a561964910476785da31c63b32b226acda2365a17224 +size 25338 diff --git a/detail_png/Shaft_03655_length.png b/detail_png/Shaft_03655_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e2b2b18dfc43cde39de031313e0523f748ae887c --- /dev/null +++ b/detail_png/Shaft_03655_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dce94774442ffb622395724b76c11a025039fbdbbc0ff0aa8c88bf47133dc629 +size 20344 diff --git a/detail_png/Shaft_03655_title.png b/detail_png/Shaft_03655_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8e2e901e7ed72d463e6ca5b830f5fe9409e9c3b6 --- /dev/null +++ b/detail_png/Shaft_03655_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c47ef0ea862009a4b70baa5dcd3ed0890e54c186c494739f7f20105c75ebd21 +size 26622 diff --git a/detail_png/Shaft_03656_diam.png b/detail_png/Shaft_03656_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..192361a23b09a3d56a7de76afc6a663b7b62fcd2 --- /dev/null +++ b/detail_png/Shaft_03656_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53da59aa44dc331277aa7238904873d07c51eb44d4abcd6131343c67c74f36d2 +size 31146 diff --git a/detail_png/Shaft_03656_length.png b/detail_png/Shaft_03656_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a44f6b3dcb2cb9d4ccb7415c63856ef8c454ba47 --- /dev/null +++ b/detail_png/Shaft_03656_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f305ea6a49f9971d4a0b7af73e9edfe124331f838b125c8e5631cb75b1fe5c7c +size 31589 diff --git a/detail_png/Shaft_03656_title.png b/detail_png/Shaft_03656_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2957bbcdfe4234208c030369f3cb65e983f29d24 --- /dev/null +++ b/detail_png/Shaft_03656_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1a59b7a9ccd17e8445817edbd4816f3f2234a4ceef9a03b8eb70de136213c2f +size 33063 diff --git a/detail_png/Shaft_03669_diam.png b/detail_png/Shaft_03669_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4722991ec4041e8cddfbae271b4db5cd35ae141a --- /dev/null +++ b/detail_png/Shaft_03669_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99aa9295326465945e523cb3a34027a10410a60fa1584d3a00d54aa098a00720 +size 18677 diff --git a/detail_png/Shaft_03669_length.png b/detail_png/Shaft_03669_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c028ab50a59b9e0800ddd3102ff358552b6bf862 --- /dev/null +++ b/detail_png/Shaft_03669_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71e975ce719090ed8518d9d21284d566340fa43e982738f73a0718b906c8f037 +size 18313 diff --git a/detail_png/Shaft_03669_title.png b/detail_png/Shaft_03669_title.png new file mode 100644 index 0000000000000000000000000000000000000000..22991303e4e02646c8fc971e0e6a222102e9c1bc --- /dev/null +++ b/detail_png/Shaft_03669_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdcba1e351edfab1ff5366ad55f628197d16e385493e22624e63cad4120d465d +size 30559 diff --git a/detail_png/Shaft_03670_diam.png b/detail_png/Shaft_03670_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..93fd5f4cd5e9c2c63628cc0b76d05bcb2d10fc49 --- /dev/null +++ b/detail_png/Shaft_03670_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7cb8d6f0c79fe9d732aca37ab847f10d59b33b4ab2ca18fe8bb1b9ed5dc39dd +size 35761 diff --git a/detail_png/Shaft_03670_length.png b/detail_png/Shaft_03670_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b680fed4738bd21642b2df99a00fe3379526b0f0 --- /dev/null +++ b/detail_png/Shaft_03670_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6735ac0ef568dddec228218937416d0068b4f11af93cb8ff0898905615ac4d01 +size 43802 diff --git a/detail_png/Shaft_03670_title.png b/detail_png/Shaft_03670_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ae821ac5b0bdd39665e069b66056056701714fe --- /dev/null +++ b/detail_png/Shaft_03670_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1a41dc4546a0bdf4a68b8be510de869b308b7a4ec0ec989670d0b8616af5676 +size 30657 diff --git a/detail_png/Shaft_03672_diam.png b/detail_png/Shaft_03672_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..82820f26d642920c203390b274799d0eee65dba0 --- /dev/null +++ b/detail_png/Shaft_03672_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:318e70733b50e34c9b29b988e04200c9dddc493a9850ae1e3fff1b77170bd2d0 +size 19366 diff --git a/detail_png/Shaft_03672_length.png b/detail_png/Shaft_03672_length.png new file mode 100644 index 0000000000000000000000000000000000000000..acb69f9ea5955253fd60537e0e12e7fdaa7cbea6 --- /dev/null +++ b/detail_png/Shaft_03672_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9da09487689276b50e76c05d54350ac3a45646858374ca4a7d9abd9f0500dfb +size 17863 diff --git a/detail_png/Shaft_03672_title.png b/detail_png/Shaft_03672_title.png new file mode 100644 index 0000000000000000000000000000000000000000..878d734c2da612d5abd8d3999b4cd98062aa9de6 --- /dev/null +++ b/detail_png/Shaft_03672_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b50043df90126498cec6247269bb991a93c5568d40ee9adf9fa6ae5701adcfe8 +size 22761 diff --git a/detail_png/Shaft_03673_diam.png b/detail_png/Shaft_03673_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9906568b3d653cea66de6e9a983a5eeb6d713450 --- /dev/null +++ b/detail_png/Shaft_03673_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fff42deb220cfae4b21f30b15d21d116dcb98480c8f2f60cacbcdb743fd77693 +size 20802 diff --git a/detail_png/Shaft_03673_length.png b/detail_png/Shaft_03673_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ca8169c93e976bad606d515aeb7cc7d53149d537 --- /dev/null +++ b/detail_png/Shaft_03673_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:600e1b6749c8b53a37d49612cb031a4b531d72ffc1365265655d65352e69f72b +size 28451 diff --git a/detail_png/Shaft_03673_title.png b/detail_png/Shaft_03673_title.png new file mode 100644 index 0000000000000000000000000000000000000000..df0d138deaa222e35264fcc4028298af77c4276a --- /dev/null +++ b/detail_png/Shaft_03673_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c7cb2421f359f405ec6282da3342bdecde3c8730628cfc39a0a08e53a7450b0 +size 33057 diff --git a/detail_png/Shaft_03678_diam.png b/detail_png/Shaft_03678_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ebe3e989155d5ce4262fb68b45cb447fdeacc655 --- /dev/null +++ b/detail_png/Shaft_03678_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:461f8a631f1daf774a48205cc86de46fbbe9d4b5e2b53987b4d697e1ec9c8f01 +size 18690 diff --git a/detail_png/Shaft_03678_length.png b/detail_png/Shaft_03678_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2fe9a72d8156359a704f5cd59acfbd3bee68699e --- /dev/null +++ b/detail_png/Shaft_03678_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fed89ab9be94661767a5dc6d238e0bac54f8a99eab3d681b61e9c914abea3fd8 +size 14854 diff --git a/detail_png/Shaft_03678_title.png b/detail_png/Shaft_03678_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fa4b8a653baa8ba186886c30f682eeaeebc4469a --- /dev/null +++ b/detail_png/Shaft_03678_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f498ff638ec54bdbafd78de4afa060633683841b90c3d13bc1e64661e4b3faf +size 17208 diff --git a/detail_png/Shaft_03680_diam.png b/detail_png/Shaft_03680_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5a66f8dcb971be5a591ae9658c4ac7904d0cda0b --- /dev/null +++ b/detail_png/Shaft_03680_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dda2959de36b997bab1781493202c9d43e0457ffcf8e8326634b75faf400c1d1 +size 24835 diff --git a/detail_png/Shaft_03680_length.png b/detail_png/Shaft_03680_length.png new file mode 100644 index 0000000000000000000000000000000000000000..115bd8f2d147aed33d19b3a07ba49cd064604a57 --- /dev/null +++ b/detail_png/Shaft_03680_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82f8f04df95934f6cd59eca94346ce0f9cd6857ea35f566f72a2ce6a156226f1 +size 22283 diff --git a/detail_png/Shaft_03680_title.png b/detail_png/Shaft_03680_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7f60326d5d31922db43437ee056b61a9cb5d3775 --- /dev/null +++ b/detail_png/Shaft_03680_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f97ddef76a516779d3450e080d4d4d8fc3274046b09e2125a0932974523a1f48 +size 33511 diff --git a/detail_png/Shaft_03683_diam.png b/detail_png/Shaft_03683_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b2c0ec8ae7d6bd41d625a1a103610eb980307a91 --- /dev/null +++ b/detail_png/Shaft_03683_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6edfda93d704ad138da97def1ad116e8b4893b6512c6aaaf2967f7fead023b83 +size 18848 diff --git a/detail_png/Shaft_03683_length.png b/detail_png/Shaft_03683_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cd52c05cc4507e74a1ab4c92d3ba3fab9af88b6f --- /dev/null +++ b/detail_png/Shaft_03683_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d45b0b01cfdeb01eee79fa07065d12409fd61da7cdabb0c177ed102a7088b3f +size 15127 diff --git a/detail_png/Shaft_03683_title.png b/detail_png/Shaft_03683_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c720ecdaefa6bc04ed3eef6e7c2b4823dd70bc0a --- /dev/null +++ b/detail_png/Shaft_03683_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4225684cb754649381388e597b4be012218324feba9dde860657941c3b4d852b +size 18770 diff --git a/detail_png/Shaft_03684_diam.png b/detail_png/Shaft_03684_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4a480bc9c02c873f784699362965e848e4d330bd --- /dev/null +++ b/detail_png/Shaft_03684_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c04fddc587d48bc1b7122fb81627673e2d69fcea6c742f807f51b389ca61761f +size 19560 diff --git a/detail_png/Shaft_03684_length.png b/detail_png/Shaft_03684_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3c30523394661d70489cc7407ef5a6a021672ee0 --- /dev/null +++ b/detail_png/Shaft_03684_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c7fca18be9f049a1dd2df81413fc0cf967f56dca28eb0783dd9c6943495dd73 +size 17401 diff --git a/detail_png/Shaft_03684_title.png b/detail_png/Shaft_03684_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f3f61d4ede7cafd3eb894c22f76a6f60c3dcd634 --- /dev/null +++ b/detail_png/Shaft_03684_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1806492ceb065756908e87a812b15bdf52b4af2a2631db918ab0a79e4fefd047 +size 18830 diff --git a/detail_png/Shaft_03686_diam.png b/detail_png/Shaft_03686_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6c32fda20a26837f187dc93af266ec389e5925d1 --- /dev/null +++ b/detail_png/Shaft_03686_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d4ef64dd63ed44a0f3e40a1ab3d86edc3f8cadc6531078e060fab19003c9e5f +size 26314 diff --git a/detail_png/Shaft_03686_length.png b/detail_png/Shaft_03686_length.png new file mode 100644 index 0000000000000000000000000000000000000000..17a13420bd0a71ba09dae3c6532bd3fff6ed8157 --- /dev/null +++ b/detail_png/Shaft_03686_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d346882986682922a04de613bf817e9622d8a1c81b8161e8fc52ef174ddc2edc +size 35870 diff --git a/detail_png/Shaft_03686_title.png b/detail_png/Shaft_03686_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4380d6e149d0e209851d969badc8e9c90c0ac154 --- /dev/null +++ b/detail_png/Shaft_03686_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:878c217702d5783561bb741826d869bb1758655f51fd8743aac220e7c19db558 +size 37265 diff --git a/detail_png/Shaft_03695_diam.png b/detail_png/Shaft_03695_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2cf4e41641a4ca8cbde3fec676e0018c873249e5 --- /dev/null +++ b/detail_png/Shaft_03695_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc3c104f90527fe6bffc7256cd2e733f8a401b2d6653fd75c0a9eb4f566da1a3 +size 29987 diff --git a/detail_png/Shaft_03695_length.png b/detail_png/Shaft_03695_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d3bbfb32f26f22a64c002f1262ce334812cfca2f --- /dev/null +++ b/detail_png/Shaft_03695_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:754866a9640e1984ddf19c274d559420aaa1efe42d7e26f8121ecd917c8e853e +size 22631 diff --git a/detail_png/Shaft_03695_title.png b/detail_png/Shaft_03695_title.png new file mode 100644 index 0000000000000000000000000000000000000000..175d7a4d75660bdb5b3baaab06fbc346a4221a61 --- /dev/null +++ b/detail_png/Shaft_03695_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76fb529f4b323a31c2ab4503ca3f01d54faa87938a03a5009d5acb042c0e7234 +size 28156 diff --git a/detail_png/Shaft_03696_diam.png b/detail_png/Shaft_03696_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0b590bfe8d5be2b9468f15bf6f08ba831bab8463 --- /dev/null +++ b/detail_png/Shaft_03696_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f7bbcebd3ed475a19bda1ff67f330132df4a003586c264efb2b805c51fb68d8 +size 25728 diff --git a/detail_png/Shaft_03696_length.png b/detail_png/Shaft_03696_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e27ffb068e66cc485a2346e0320c5c8738bb4670 --- /dev/null +++ b/detail_png/Shaft_03696_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cbe2a68a501f93913457bbdb2e2400ccb23393c7b3bad4b858b6b866dc12dfe +size 36665 diff --git a/detail_png/Shaft_03696_title.png b/detail_png/Shaft_03696_title.png new file mode 100644 index 0000000000000000000000000000000000000000..45e5883eb8ce35cd913d8d96a52b89ef3d8ec61a --- /dev/null +++ b/detail_png/Shaft_03696_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8e1f109d7172eba6fba6ec880e51b08a53d4650e847851fc1958b448064580b +size 31044 diff --git a/detail_png/Shaft_03697_diam.png b/detail_png/Shaft_03697_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cfae21c7c896d5fa9ea73c70ffcb22a061cd5296 --- /dev/null +++ b/detail_png/Shaft_03697_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8f23075604ce2930da06f44d20bae0e551ef24e81c25b58da20a4796783bf49 +size 20082 diff --git a/detail_png/Shaft_03697_length.png b/detail_png/Shaft_03697_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5fd8d01fc8d35866d48abcf61d56970ba6746105 --- /dev/null +++ b/detail_png/Shaft_03697_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78fa7d5843eb7fb41263ddf59b19306ae07aeecf6681b47f6a3a188188b229eb +size 21718 diff --git a/detail_png/Shaft_03697_title.png b/detail_png/Shaft_03697_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ce58814c6fb9c276430fcc648dd7ae282afda83 --- /dev/null +++ b/detail_png/Shaft_03697_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e54fb226f603aeae88c12ed46d9eff47d7e000c59715f8b802dcaf2c1e0312a +size 32818 diff --git a/detail_png/Shaft_03701_diam.png b/detail_png/Shaft_03701_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25fc9ebe47aa9eadf9e81e5defa47ea0a42485a5 --- /dev/null +++ b/detail_png/Shaft_03701_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61e8feb056b5d5a33c90a5176986f3de9dc95a126d7f152323ea5949044447c3 +size 24482 diff --git a/detail_png/Shaft_03701_length.png b/detail_png/Shaft_03701_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3cbfa397f5ad574e97d1fbe6e3c31f57431e1aa3 --- /dev/null +++ b/detail_png/Shaft_03701_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4188d466b7c7d42ada3b8cb80d40e06997d03552b6323e80599f8fbe2e8cd319 +size 33322 diff --git a/detail_png/Shaft_03701_title.png b/detail_png/Shaft_03701_title.png new file mode 100644 index 0000000000000000000000000000000000000000..73aee10a62fe0370f846700144dfcc2e231fd9f0 --- /dev/null +++ b/detail_png/Shaft_03701_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5e752951a8a739ab307559c20f786a062e79999dad17039eecfab15f3bbfff6 +size 31565 diff --git a/detail_png/Shaft_03702_diam.png b/detail_png/Shaft_03702_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..caa51d200a19084c8c39aeca769a76541fb0393c --- /dev/null +++ b/detail_png/Shaft_03702_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58045769bccf540e6cefccc99641ef7bf923bf62325a5662d377c6ba30e0e780 +size 25251 diff --git a/detail_png/Shaft_03702_length.png b/detail_png/Shaft_03702_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a3c613ccc31a5bbc4eb73b752b79ed4dcfb3b07d --- /dev/null +++ b/detail_png/Shaft_03702_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75b02814d1f811c2b803487886adf02ba07f0e2013d2578111dce8f42bb30ef2 +size 18417 diff --git a/detail_png/Shaft_03702_title.png b/detail_png/Shaft_03702_title.png new file mode 100644 index 0000000000000000000000000000000000000000..53d57167ba3ea1d64a6027ae3a7160ec08e8507a --- /dev/null +++ b/detail_png/Shaft_03702_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df9a6b7cc35ed11fabb90a94d3fb2c69313eab780d7343b186f9fd8e745c020a +size 18103 diff --git a/detail_png/Shaft_03703_diam.png b/detail_png/Shaft_03703_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..64875d190584e7ef533648fd69ed89c22742135c --- /dev/null +++ b/detail_png/Shaft_03703_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:050224eb9c7de3b0aa510041df951ee77bebcf715207475f9d9f78fd05ec667b +size 29925 diff --git a/detail_png/Shaft_03703_length.png b/detail_png/Shaft_03703_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5cc549a65fe5ad29b09672808dda78451b5a13b8 --- /dev/null +++ b/detail_png/Shaft_03703_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad3b3f6e99502ce8a797a6a4e04da1a5d2c2a62e4712cebc23edf9b80a2ca390 +size 24604 diff --git a/detail_png/Shaft_03703_title.png b/detail_png/Shaft_03703_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c0d5f0f60e6a35bc18a05bd043183f187351951e --- /dev/null +++ b/detail_png/Shaft_03703_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d5099e9f0cb65f7d69e0d8dde6d49da933880cd0b0e1ed9112410d42249750b +size 22074 diff --git a/detail_png/Shaft_03706_diam.png b/detail_png/Shaft_03706_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7e7c47ecbc2212094295018e984251ac0ff2e5ad --- /dev/null +++ b/detail_png/Shaft_03706_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1319bd2bb43548341d88b55e2837594478ebb4cf6ae6a21bba02a16568e9bd1f +size 27346 diff --git a/detail_png/Shaft_03706_length.png b/detail_png/Shaft_03706_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0fc7d86054b37f2e022ea0a9d0551b0bb318b559 --- /dev/null +++ b/detail_png/Shaft_03706_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc076a41e72aacb64e6c94d52c511187a2f5ab8f93a0240f778ad4679a50851a +size 29152 diff --git a/detail_png/Shaft_03706_title.png b/detail_png/Shaft_03706_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d0689682ee9fb540f8d2f6a8af46eda072f20144 --- /dev/null +++ b/detail_png/Shaft_03706_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3c9c07fd89e9cfb82c1348beeb98db3a7b8223b73d2f00b54cff3784591c5c6 +size 30326 diff --git a/detail_png/Shaft_03712_diam.png b/detail_png/Shaft_03712_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..95fe0e1bcdf539509f790f5194fb1ea92cbcb58a --- /dev/null +++ b/detail_png/Shaft_03712_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b2f4ac26689453dc39e5f00fb2d29ebfceaf303563cca0baa015dec54a8e814 +size 20478 diff --git a/detail_png/Shaft_03712_length.png b/detail_png/Shaft_03712_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0d177e78ffaca71d930d9a3c569db84cdba9ea94 --- /dev/null +++ b/detail_png/Shaft_03712_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e36c7fc8edd8c03ae04b7d7f2adbce2967832e8782e7225052ab9617b665331 +size 16247 diff --git a/detail_png/Shaft_03712_title.png b/detail_png/Shaft_03712_title.png new file mode 100644 index 0000000000000000000000000000000000000000..341e13da5ce5672a668f297a41085eaa721bedff --- /dev/null +++ b/detail_png/Shaft_03712_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0acd32037ad42b989106ace7e6710cb4f6b990daa591fe18df8c4b80cfc43c3d +size 16399 diff --git a/detail_png/Shaft_03725_diam.png b/detail_png/Shaft_03725_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b67b1e85614026c8c132c345c391bcb861581799 --- /dev/null +++ b/detail_png/Shaft_03725_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0cb6430ccd642a2421d42a76bce6e1f75788ae90e90247424eba95237cc9b01 +size 24107 diff --git a/detail_png/Shaft_03725_length.png b/detail_png/Shaft_03725_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d2a2a7a9bb9e48732b45a7557ac53779ed18a4d4 --- /dev/null +++ b/detail_png/Shaft_03725_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3521e0fb2f0a2cb8e5723c1541c8d4405d6d4482ac4ae683596434a6efaf780 +size 20132 diff --git a/detail_png/Shaft_03725_title.png b/detail_png/Shaft_03725_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1343a2e38ece234759234d23baffed747f9102a4 --- /dev/null +++ b/detail_png/Shaft_03725_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab2c49b3a9ebc7acdd80b51f91288d58b48d25a40e1dfcf451bf87c66ee79d9a +size 17363 diff --git a/detail_png/Shaft_03731_diam.png b/detail_png/Shaft_03731_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..01b72a0932d1ef91f28721263a9ab7761edc1c3d --- /dev/null +++ b/detail_png/Shaft_03731_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:622a61e5298d7a635afdbf8cf9fa43aa1b1e9cc60b1513c4e591cc1095f972a1 +size 34487 diff --git a/detail_png/Shaft_03731_length.png b/detail_png/Shaft_03731_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cbcfdc63ab0a704e25c61d576321500bf3165548 --- /dev/null +++ b/detail_png/Shaft_03731_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1f56a24712c386d9f825cc75f25e094c840aef7fe0b283fcd9088a01f32e2b9 +size 40523 diff --git a/detail_png/Shaft_03731_title.png b/detail_png/Shaft_03731_title.png new file mode 100644 index 0000000000000000000000000000000000000000..db56f5f6fce0127dab4d4dc10820bfe5d2effd83 --- /dev/null +++ b/detail_png/Shaft_03731_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b95e36024b4d96e5b5def4fd87fa42895dee86b5bf755aafc56a593c23fd4b6e +size 35235 diff --git a/detail_png/Shaft_03733_diam.png b/detail_png/Shaft_03733_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bcca1fd0039e8c20f55d598bb0cb59cdd3e87d15 --- /dev/null +++ b/detail_png/Shaft_03733_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8dff3052950b227daf1fb0dd0c984b612c8bcfcd865a5040bd9996868eddf57 +size 19559 diff --git a/detail_png/Shaft_03733_length.png b/detail_png/Shaft_03733_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d53216155f87138ced067a7b9233e009b47db609 --- /dev/null +++ b/detail_png/Shaft_03733_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae3a58978f0ba410576f314f6127efbe5332fa85be701b11081db3e7add12866 +size 15505 diff --git a/detail_png/Shaft_03733_title.png b/detail_png/Shaft_03733_title.png new file mode 100644 index 0000000000000000000000000000000000000000..446afd5c15c9837353278ec469f0c611278f9971 --- /dev/null +++ b/detail_png/Shaft_03733_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ce9d5689b394e368c116b1ece0d8ee3e1c2bfb5be64a386785b607ef2837384 +size 18842 diff --git a/detail_png/Shaft_03736_diam.png b/detail_png/Shaft_03736_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a4cef38d42306f16bbf96c2d84e269b00f8c4dc4 --- /dev/null +++ b/detail_png/Shaft_03736_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e41818c8b721d3ee4a0ca2f007a2bbcd017e31ab526bffd170863200631b293 +size 24887 diff --git a/detail_png/Shaft_03736_length.png b/detail_png/Shaft_03736_length.png new file mode 100644 index 0000000000000000000000000000000000000000..71bed1e3b0f3668308facd02551b15698b221594 --- /dev/null +++ b/detail_png/Shaft_03736_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49ad59401e0e469687eb90e72c800940fa52ba6e43c01167a3307484fb8a028d +size 29906 diff --git a/detail_png/Shaft_03736_title.png b/detail_png/Shaft_03736_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cc74bad4216f2b42e11b2dbf3c587239fb89a183 --- /dev/null +++ b/detail_png/Shaft_03736_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:666cd71f394ef0ed5bacedeee8a664d505b73a7d1a47af6d6d3529542e01c063 +size 29821 diff --git a/detail_png/Shaft_03739_diam.png b/detail_png/Shaft_03739_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..02777e0151e254e120f21382ce966d78c6a866ff --- /dev/null +++ b/detail_png/Shaft_03739_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffee3f34fdbbcd576271b67cc675cd1af99598d22a7037e2192afca658a7e10a +size 18700 diff --git a/detail_png/Shaft_03739_length.png b/detail_png/Shaft_03739_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9adcf099937e6ee8394166e8c38e18d0427af8a2 --- /dev/null +++ b/detail_png/Shaft_03739_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3902e1c5013165ff00a9876821603c21b4baeca417440fbb8f789c6d76913495 +size 17423 diff --git a/detail_png/Shaft_03739_title.png b/detail_png/Shaft_03739_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e455b39e73ce73e4502e046c6fc0db9dad90c7ac --- /dev/null +++ b/detail_png/Shaft_03739_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60af125d2937f341218bde4119a4fe0bfb378e5276bcad16e57f4d6dde2f6c5d +size 15675 diff --git a/detail_png/Shaft_03740_diam.png b/detail_png/Shaft_03740_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9f264577aa1b0ea690486ef58be8a9e63b9413dc --- /dev/null +++ b/detail_png/Shaft_03740_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b7f2cae83f92cafb9611152b546f69b567352291845f09385c3b94df954b100 +size 37887 diff --git a/detail_png/Shaft_03740_length.png b/detail_png/Shaft_03740_length.png new file mode 100644 index 0000000000000000000000000000000000000000..733eb0c8d11214549e1728ae5baaf3e5aecc5edf --- /dev/null +++ b/detail_png/Shaft_03740_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1a6ebc8df3cf6532208796cb7a45838cb053466e3b90e9f1b3f68287cda3114 +size 52152 diff --git a/detail_png/Shaft_03740_title.png b/detail_png/Shaft_03740_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ed839295dc2233ef6bcc405567d0b97146cf974d --- /dev/null +++ b/detail_png/Shaft_03740_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8ffc6f925f3b2bbe46b0db94939b909477b8d6c38c4afe8ac959ba4a7332c7e +size 36135 diff --git a/detail_png/Shaft_03745_diam.png b/detail_png/Shaft_03745_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c1def0c113d0fa2e11bf376a3588a60630fbff09 --- /dev/null +++ b/detail_png/Shaft_03745_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50dcd0eae955b91c6cf44c69b981021112f92e5d8d22cf89bf898133f894157e +size 26566 diff --git a/detail_png/Shaft_03745_length.png b/detail_png/Shaft_03745_length.png new file mode 100644 index 0000000000000000000000000000000000000000..01336cbe1417a2c39ae37048cd5dfce3d68f531b --- /dev/null +++ b/detail_png/Shaft_03745_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b09daa7e2171c56345068d8b781a5f56cb32e046bfa36d6bfc170913aefdc61d +size 30475 diff --git a/detail_png/Shaft_03745_title.png b/detail_png/Shaft_03745_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8e364a5965a5c2fce004aed25d5e7322ea18f294 --- /dev/null +++ b/detail_png/Shaft_03745_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fecc4a1b46c4ba06538e15a3414b2683b1533b0a0e21564c1d75a807b80a9d9 +size 29428 diff --git a/detail_png/Shaft_03753_diam.png b/detail_png/Shaft_03753_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1d3ce4a047c6fb5408568aadfea357460505c5f8 --- /dev/null +++ b/detail_png/Shaft_03753_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d64724842c7e78f4eef82bfdd3d0c424cf116eba6135e40a7edadbc03cff0df +size 20693 diff --git a/detail_png/Shaft_03753_length.png b/detail_png/Shaft_03753_length.png new file mode 100644 index 0000000000000000000000000000000000000000..770fa43416dfbc1930ed5cc24b1aa55589e2cef6 --- /dev/null +++ b/detail_png/Shaft_03753_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0be67ca81f68336e73cf309aea6f7477493ac31aa887dab819a7a259e2f298f5 +size 23927 diff --git a/detail_png/Shaft_03753_title.png b/detail_png/Shaft_03753_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eb62daba3d83bf769a37c95d627e8cb8d5f16536 --- /dev/null +++ b/detail_png/Shaft_03753_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1366768e91f2538287722bdf74531ab8ebf3664dcf41ff50fbdf68e889a25f13 +size 32847 diff --git a/detail_png/Shaft_03756_diam.png b/detail_png/Shaft_03756_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5ac848b5c6354be0642092a50314a47846564501 --- /dev/null +++ b/detail_png/Shaft_03756_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5877efe90c8eae627dadcd8de8735a5a1a8e40bf17aaebf0100dbeab9029e8fa +size 20071 diff --git a/detail_png/Shaft_03756_length.png b/detail_png/Shaft_03756_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7ec7f57245eaf5a6f0516f9b2b99160bb34ce804 --- /dev/null +++ b/detail_png/Shaft_03756_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3359fb8f20350d0dfffc150d0abb068ff3cf21db382b5773a1dcd4dcef5650cb +size 26737 diff --git a/detail_png/Shaft_03756_title.png b/detail_png/Shaft_03756_title.png new file mode 100644 index 0000000000000000000000000000000000000000..70a752385ac4f9b45648714d98bd2ad237c1a009 --- /dev/null +++ b/detail_png/Shaft_03756_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06d303a53efd852e51b0902039f70745097de27f93d25b15df15518db0c56fc4 +size 36107 diff --git a/detail_png/Shaft_03757_diam.png b/detail_png/Shaft_03757_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e04171ccc9f91bfa03853146de02092460cc639a --- /dev/null +++ b/detail_png/Shaft_03757_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76630d73dc9d19264e3e0c97f06de96da26a377f14e558bdde62008815e9833e +size 27643 diff --git a/detail_png/Shaft_03757_length.png b/detail_png/Shaft_03757_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f41f7d1cdbccf294a197a7f5706c9739eab9ba1b --- /dev/null +++ b/detail_png/Shaft_03757_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bf9d6d3b1f94cce92c8824d2165c7f7e1512887c1922b7aa2fe956a52d34fe1 +size 20183 diff --git a/detail_png/Shaft_03757_title.png b/detail_png/Shaft_03757_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cd606465e7e7c2d3e371fbea436b4e47cae88b19 --- /dev/null +++ b/detail_png/Shaft_03757_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8757913f7b39b7ee8da35fb0fcbc726f847a5680cdc2549a6206e59fe33c0b2 +size 15643 diff --git a/detail_png/Shaft_03761_diam.png b/detail_png/Shaft_03761_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8ab907fa2f1e7a880169f40502ba2fd2c4ef8ed6 --- /dev/null +++ b/detail_png/Shaft_03761_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cb139892ddb1e6d1dc2b485d0e44f07e3ae43936e9aab153f9bdada3e3f5dde +size 35162 diff --git a/detail_png/Shaft_03761_length.png b/detail_png/Shaft_03761_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e7cc35b51f492c80bfa016dcd18f7a13c8fa8df7 --- /dev/null +++ b/detail_png/Shaft_03761_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60a8ab52a5dd6de89ce96688b5977d300af67f26422e0bbcead59888789cfd8a +size 27704 diff --git a/detail_png/Shaft_03761_title.png b/detail_png/Shaft_03761_title.png new file mode 100644 index 0000000000000000000000000000000000000000..35a6005f8141311f79696587d7997a1706524ed1 --- /dev/null +++ b/detail_png/Shaft_03761_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac7896467779438c18c2af372f0948ad479caa998f4a9b0298c864fc8ca83d45 +size 22318 diff --git a/detail_png/Shaft_03762_diam.png b/detail_png/Shaft_03762_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0b909c7cfd5643729833c77a209f2983a9125def --- /dev/null +++ b/detail_png/Shaft_03762_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dce0e3c20f12dd0a0b93f679e4346b50cd1fce29105ae44ee227d2ccc86b1bb3 +size 26379 diff --git a/detail_png/Shaft_03762_length.png b/detail_png/Shaft_03762_length.png new file mode 100644 index 0000000000000000000000000000000000000000..60e444fc4c2f3730286442029b32a4db1aabf3b3 --- /dev/null +++ b/detail_png/Shaft_03762_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a92413e11511c7717543ce1dab12d6aa7c3c365204ea289ecc6e2473399aba23 +size 20644 diff --git a/detail_png/Shaft_03762_title.png b/detail_png/Shaft_03762_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cf5047006a83d8635e7b38efd7cb980da77d0f5f --- /dev/null +++ b/detail_png/Shaft_03762_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9d423efddcff68a866f136b8185afd79d2754d12f2a85a096e91a4c779eb526 +size 17864 diff --git a/detail_png/Shaft_03766_diam.png b/detail_png/Shaft_03766_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f57afcab99ae16c709ca13bd61156ad4b0de0fb3 --- /dev/null +++ b/detail_png/Shaft_03766_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38c180fe08ef0710dc0f43fd04eaa592a59c630811d5ab0758bc058476c82e78 +size 31789 diff --git a/detail_png/Shaft_03766_length.png b/detail_png/Shaft_03766_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3ab2129b487331cd59056708b78b823a8b48d1ca --- /dev/null +++ b/detail_png/Shaft_03766_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb1004ada90222c4fadb605f40f32c3cbadc070068fb8da69b49007900018846 +size 25919 diff --git a/detail_png/Shaft_03766_title.png b/detail_png/Shaft_03766_title.png new file mode 100644 index 0000000000000000000000000000000000000000..df6eec2d8f49b9e160e0ad826a3d62f57a72dbd2 --- /dev/null +++ b/detail_png/Shaft_03766_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6829c45adb96e828d7d6b6d65c0c641eb4f9111cd616db70606587f652ff95d1 +size 30309 diff --git a/detail_png/Shaft_03774_diam.png b/detail_png/Shaft_03774_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8b47f801ab3c2294bccb3cb21400c34add688bdc --- /dev/null +++ b/detail_png/Shaft_03774_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73b04c1369f7090871f6bcdb664cfa59dfef5a9f9de5f327e75220afabb245e4 +size 28369 diff --git a/detail_png/Shaft_03774_length.png b/detail_png/Shaft_03774_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0e5c382aad8613ba069c85cf55d21bab8038cc87 --- /dev/null +++ b/detail_png/Shaft_03774_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16070cfde93b47feccda492b56842cc6cad69185a120bfa2f69fdd9cae04a2ff +size 27843 diff --git a/detail_png/Shaft_03774_title.png b/detail_png/Shaft_03774_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f8ad3f1d9c5d5d41438059988f02e1c6306e22f1 --- /dev/null +++ b/detail_png/Shaft_03774_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2a2721746238fe2a79edcd85aea5cdbc791dddf23ec1f7461b0e400ba053826 +size 30999 diff --git a/detail_png/Shaft_03776_diam.png b/detail_png/Shaft_03776_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6ec054cf6a3a5bac14921802027c1748c2d231f8 --- /dev/null +++ b/detail_png/Shaft_03776_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3caacdc77d72f32ac3acc2f88f1d4f64e7ecacba5b99f66cab7a3e99ec26f244 +size 20198 diff --git a/detail_png/Shaft_03776_length.png b/detail_png/Shaft_03776_length.png new file mode 100644 index 0000000000000000000000000000000000000000..47cc3282b8ee69ee851ea9a1cc6e8ca5be7a1727 --- /dev/null +++ b/detail_png/Shaft_03776_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1217ec19c5ac12b8e7aed2c2cf5330f39cf60c7438ca378d027f06fb8e89b2c2 +size 21405 diff --git a/detail_png/Shaft_03776_title.png b/detail_png/Shaft_03776_title.png new file mode 100644 index 0000000000000000000000000000000000000000..58cd991646432f4e380d6c76cf86cd83e435f0d5 --- /dev/null +++ b/detail_png/Shaft_03776_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9f5d1de5364e7633a0b493162243ccd1be484fabdeb04b8c21f1786703292cd +size 29594 diff --git a/detail_png/Shaft_03779_diam.png b/detail_png/Shaft_03779_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8624170c0064bdce07b7884efb76e115e75dc263 --- /dev/null +++ b/detail_png/Shaft_03779_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd4cebefcddf58a6641363ff36a0e51c31d163ebf6aeed1fe51c5b15ffec2c72 +size 43817 diff --git a/detail_png/Shaft_03779_length.png b/detail_png/Shaft_03779_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8c6525c22083b4987dbc908343c168de77c4081f --- /dev/null +++ b/detail_png/Shaft_03779_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e404905ee188cfc12ae3001db865d55bdcbd08cc03746fff962bb8f96004450 +size 54411 diff --git a/detail_png/Shaft_03779_title.png b/detail_png/Shaft_03779_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aa94d7dfaeee2195f0a1f13174e19326bddfcea9 --- /dev/null +++ b/detail_png/Shaft_03779_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:219c5b4af5f77d768a6c804532f2150d6a8c4441edf3b42705632cb22eef5134 +size 30046 diff --git a/detail_png/Shaft_03786_diam.png b/detail_png/Shaft_03786_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..779979955272d62e4d25ff3d9790c00e3dca2f18 --- /dev/null +++ b/detail_png/Shaft_03786_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3338b79f58acf5096f455846f96fa89644ccc2aa7c6579cd19275e539692b53 +size 20501 diff --git a/detail_png/Shaft_03786_length.png b/detail_png/Shaft_03786_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0510d8a1c8a83b2056848171bc90c1434adac72d --- /dev/null +++ b/detail_png/Shaft_03786_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57f0500d0776762287b8fcd60550c09960e38f4679583a72a05b98d03caee071 +size 14848 diff --git a/detail_png/Shaft_03786_title.png b/detail_png/Shaft_03786_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d2b8b5be92321def5e66dfb75fcc69887234e21f --- /dev/null +++ b/detail_png/Shaft_03786_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee18a62c8c33c1b32355547fa3297395eeb37db0b6f4b9c3c00e915833a60bef +size 18700 diff --git a/detail_png/Shaft_03791_diam.png b/detail_png/Shaft_03791_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..540fb7bbb63a1484d94770f4408883b447afd007 --- /dev/null +++ b/detail_png/Shaft_03791_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4a02108f91f368eb77d664297028778fea9a106a7e91cba8b31e99e321c792a +size 28305 diff --git a/detail_png/Shaft_03791_length.png b/detail_png/Shaft_03791_length.png new file mode 100644 index 0000000000000000000000000000000000000000..84b31417958270ea50c90307fdf8a04e36550d84 --- /dev/null +++ b/detail_png/Shaft_03791_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1eba5f1fc496dc14c5d8261b5497f7745fecc56186af0a1c4ab2bdb979f0ede +size 43384 diff --git a/detail_png/Shaft_03791_title.png b/detail_png/Shaft_03791_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ffcd1e34302a4588db64117b775360c1bfddaaa4 --- /dev/null +++ b/detail_png/Shaft_03791_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:006dbec0bdc1fa27f396d812e3335e0693056e617aefe6a5a08b440fa294c20d +size 32190 diff --git a/detail_png/Shaft_03800_diam.png b/detail_png/Shaft_03800_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d4750fca7b8c538d8e87fc2e43fc26d8a4e44518 --- /dev/null +++ b/detail_png/Shaft_03800_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14d482b337d16d69275e377a0593e4b1041bc933c0630aeed9622d4e4e9cd85f +size 20382 diff --git a/detail_png/Shaft_03800_length.png b/detail_png/Shaft_03800_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8567c664ccef0eba27920541debc1fd576203a14 --- /dev/null +++ b/detail_png/Shaft_03800_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa18285ccbb7939f37d6f19ed08e5eb2af07c3644e7dcfca789aff9ee5629828 +size 21012 diff --git a/detail_png/Shaft_03800_title.png b/detail_png/Shaft_03800_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6eae2ce984a37e7d454d1ec20014f75c84df17dd --- /dev/null +++ b/detail_png/Shaft_03800_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2cfa0a2f9ead69fa117cbde2ff38f017997a05721348f09532b1551c068f6a1 +size 30770 diff --git a/detail_png/Shaft_03801_diam.png b/detail_png/Shaft_03801_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a6ce5407fd4bb39239ffa9198b8e9a9b8ffcb703 --- /dev/null +++ b/detail_png/Shaft_03801_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22cb8b8a8b28dc5af4aec5e733d430c0160a426a1463d3108a4ddd18825c892c +size 24977 diff --git a/detail_png/Shaft_03801_length.png b/detail_png/Shaft_03801_length.png new file mode 100644 index 0000000000000000000000000000000000000000..973519d172319ffeefc2ae81555eb8f24af7890b --- /dev/null +++ b/detail_png/Shaft_03801_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4696d34e559b301bd87cc9430284d766084f8fce8a89cb7c0fe1700de2575039 +size 28109 diff --git a/detail_png/Shaft_03801_title.png b/detail_png/Shaft_03801_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d66029573e9ec039962e985f4cc99b9b60e55d95 --- /dev/null +++ b/detail_png/Shaft_03801_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b34b79f8b50283f2c3999b8f1d9ecff613c6fcd8a24d38ef7240dc63e8b27ea2 +size 32124 diff --git a/detail_png/Shaft_03812_diam.png b/detail_png/Shaft_03812_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..496f25e33a743479d3a7b213286639e8276da7ef --- /dev/null +++ b/detail_png/Shaft_03812_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d27ccc29bd02698912fbfa565c967ee4953d7e983ebd8021d0c9971de9655c19 +size 26949 diff --git a/detail_png/Shaft_03812_length.png b/detail_png/Shaft_03812_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a0a4c6cc58759f7017e5fc3b26ab47a83b66eeb --- /dev/null +++ b/detail_png/Shaft_03812_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:001a929bef18e6efdf2bf3e7dc8c90b2243d048d8f1aedeed441cd0a404bb947 +size 31750 diff --git a/detail_png/Shaft_03812_title.png b/detail_png/Shaft_03812_title.png new file mode 100644 index 0000000000000000000000000000000000000000..144dbe87ad8029590bfed560fb8a59c0c22450be --- /dev/null +++ b/detail_png/Shaft_03812_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7104ebc57c4a625329a011c29d5e47b131c87b41f17e5d577d9a85d0810a203 +size 32439 diff --git a/detail_png/Shaft_03813_diam.png b/detail_png/Shaft_03813_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1269d685586910f12c8d16b3cc66c3286cdfc163 --- /dev/null +++ b/detail_png/Shaft_03813_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e50e4c320cadf6f8c84f5faf1660f20c0d770ac7d6955118f3250715490a910 +size 20859 diff --git a/detail_png/Shaft_03813_length.png b/detail_png/Shaft_03813_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6eca2a887ba82bdf4735a73e75dad4568857c6cf --- /dev/null +++ b/detail_png/Shaft_03813_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae363ade31b0c6e143d8caadd61021d41fa0050f0c851415af80d9c7343a0ed3 +size 28825 diff --git a/detail_png/Shaft_03813_title.png b/detail_png/Shaft_03813_title.png new file mode 100644 index 0000000000000000000000000000000000000000..063c5a5c9a08d5908baf8641331095e1b9455459 --- /dev/null +++ b/detail_png/Shaft_03813_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8a69455d371c8132185bea2fb30aac1316ed307ef0d75b2b9ff67bc585f809a +size 35830 diff --git a/detail_png/Shaft_03815_diam.png b/detail_png/Shaft_03815_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b79a7728f52d8976022c8116c0f4e859c55fc603 --- /dev/null +++ b/detail_png/Shaft_03815_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6aed358d41f0956abc1f26bf44de60cedebd2fb2474eb2ec16907605b262bab +size 28816 diff --git a/detail_png/Shaft_03815_length.png b/detail_png/Shaft_03815_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5b9fafb56193685c9b90a083cbf76071fb151d9d --- /dev/null +++ b/detail_png/Shaft_03815_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3888a365bff45dd3e281785d6029c5d359d67dbba0f7209ebc82b486ade8cd0 +size 33044 diff --git a/detail_png/Shaft_03815_title.png b/detail_png/Shaft_03815_title.png new file mode 100644 index 0000000000000000000000000000000000000000..546f2fe06c5f70e05be3e03f6820d63d603fe3cc --- /dev/null +++ b/detail_png/Shaft_03815_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fb89a8eb84e71c486c3e917eca8dae64154ae1d0c4a69b0496b50f82e35f16f +size 29713 diff --git a/detail_png/Shaft_03816_diam.png b/detail_png/Shaft_03816_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..68c7f00cb7761459a89e69283e3ec6e56253941d --- /dev/null +++ b/detail_png/Shaft_03816_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f2c16cd539f0cf3d235527e845c3878cfd56b9b19fa9b2b1b2b1e9b42533029 +size 28236 diff --git a/detail_png/Shaft_03816_length.png b/detail_png/Shaft_03816_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ba76e90696dd266ebfd74a0077941d35bb1282b8 --- /dev/null +++ b/detail_png/Shaft_03816_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec764f94b22383726dc4173f7891fc9cb73f00394cbede4329f5db1809b12bbb +size 43464 diff --git a/detail_png/Shaft_03816_title.png b/detail_png/Shaft_03816_title.png new file mode 100644 index 0000000000000000000000000000000000000000..530dd7424bf1fa54f81c855b17fab5b7e341861b --- /dev/null +++ b/detail_png/Shaft_03816_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:596f3b7722ef73c2aa58740105c4180a7e5e21005f9b4d4f58848754e6d4d336 +size 33372 diff --git a/detail_png/Shaft_03824_diam.png b/detail_png/Shaft_03824_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9fbcfd90cfc4b06e737582698ad87a796f916fdd --- /dev/null +++ b/detail_png/Shaft_03824_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cd0a94cc3fa6ad7be821469f4c0498323907a939fb8c2af7b108c613f7cc52f +size 20622 diff --git a/detail_png/Shaft_03824_length.png b/detail_png/Shaft_03824_length.png new file mode 100644 index 0000000000000000000000000000000000000000..07d20993a01785e9113de76384f81a5d15cfc50a --- /dev/null +++ b/detail_png/Shaft_03824_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:526f69de41572fcd03cd2cc128212ec4c48b8a3cc2308592b7622d27546acf3c +size 22261 diff --git a/detail_png/Shaft_03824_title.png b/detail_png/Shaft_03824_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5e72bec24fd29c3e7da473e3aa00112a3be7677e --- /dev/null +++ b/detail_png/Shaft_03824_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e1d544e9eba88a5ad465291c7a3623704ab112a29c49a187d0ed7fe33e7bb75 +size 30266 diff --git a/detail_png/Shaft_03825_diam.png b/detail_png/Shaft_03825_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a45d3826b065e93fd325907b034253a7f346d088 --- /dev/null +++ b/detail_png/Shaft_03825_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:832f8c9892e4377c054074250fe23e696e36eeba6feea68891444cd2b58619cb +size 19619 diff --git a/detail_png/Shaft_03825_length.png b/detail_png/Shaft_03825_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c18179185a6f7d1500bfd8d25cc871341c19794d --- /dev/null +++ b/detail_png/Shaft_03825_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04f9e13ca8901bc7c05e1fb7c06a58676d3356e75f8ebb6cb1fa69f6657b55d0 +size 18366 diff --git a/detail_png/Shaft_03825_title.png b/detail_png/Shaft_03825_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fcd85f06eb172dd8a0606a0008aa47ce8fca1cad --- /dev/null +++ b/detail_png/Shaft_03825_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2f2a5c7ebcfa3fa19f75922f8c173994098a656bc24b5e90f948de03bfa9f8e +size 15747 diff --git a/detail_png/Shaft_03826_diam.png b/detail_png/Shaft_03826_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..65456a0c50d83b91a2476166e1685702a65a66b3 --- /dev/null +++ b/detail_png/Shaft_03826_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98cf435d85e04b48c03f896c404c922691c6ad1ee235ccb02532219b85c94c7f +size 25699 diff --git a/detail_png/Shaft_03826_length.png b/detail_png/Shaft_03826_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f86e724797fb44f4285149d5c5ed243aa8550971 --- /dev/null +++ b/detail_png/Shaft_03826_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae899c7c4b015e6ced6a1b57245ab273433a3641c67e4c77a9337268676546f6 +size 17734 diff --git a/detail_png/Shaft_03826_title.png b/detail_png/Shaft_03826_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8c94d14718dde7f993e982c44d34f27e78441eaa --- /dev/null +++ b/detail_png/Shaft_03826_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8add4649321c17942245ebb5092c2d99e12932502baf901bbf3d1e1f415c1803 +size 23504 diff --git a/detail_png/Shaft_03830_diam.png b/detail_png/Shaft_03830_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..45d8a6974037e40c42c29dfae9326c0acb7780b0 --- /dev/null +++ b/detail_png/Shaft_03830_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08ed1f6d05021fa1738a1f1ead55c1904da0bfe8b6f76db54ba930632efdd415 +size 20027 diff --git a/detail_png/Shaft_03830_length.png b/detail_png/Shaft_03830_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0bfaf296df34bd81c8812f08d49ec3bb4f2b8fcb --- /dev/null +++ b/detail_png/Shaft_03830_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d37fd9f0195a014a676a1dfa40c3a8a0747b38559a5d58bab649928718ea9e11 +size 16583 diff --git a/detail_png/Shaft_03830_title.png b/detail_png/Shaft_03830_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3f4babd6e9473a3e82f07dcae1f95617529ae4ff --- /dev/null +++ b/detail_png/Shaft_03830_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02b4de1ddbef500ee28d8d8e7dd3008eb93170083297a23b707ad2739aa5b999 +size 16467 diff --git a/detail_png/Shaft_03832_diam.png b/detail_png/Shaft_03832_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..38a1920d729605ce1c025026740b960adbb97a73 --- /dev/null +++ b/detail_png/Shaft_03832_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d39c4707398d4c8ee137b0054c9a37b6d46758a236b180cdd703910af503608d +size 36058 diff --git a/detail_png/Shaft_03832_length.png b/detail_png/Shaft_03832_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c7609b720b9b3f8dd06eca50797451a73917f192 --- /dev/null +++ b/detail_png/Shaft_03832_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74f28d0d086f3872bc46acf0f53ceb84745cb941d7fc9b146f7667b8cd442740 +size 34379 diff --git a/detail_png/Shaft_03832_title.png b/detail_png/Shaft_03832_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be80235cac7511d3d31ee5bd3f3300cc774bc5eb --- /dev/null +++ b/detail_png/Shaft_03832_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4d89c9cc071ab4395acfb5d905d6b0013a856f7d37d5f8cfdc4b80ba38e44e1 +size 30654 diff --git a/detail_png/Shaft_03844_diam.png b/detail_png/Shaft_03844_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c597b8010f06f3e77152256381aa98b28f213318 --- /dev/null +++ b/detail_png/Shaft_03844_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:733d7f539b59e63889d1f030a66ea9cbd29470052e1df0f38df575b8f0048511 +size 29986 diff --git a/detail_png/Shaft_03844_length.png b/detail_png/Shaft_03844_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9c871c5373e11d3394bc887dc01bd0d1bd030582 --- /dev/null +++ b/detail_png/Shaft_03844_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11ffa50110f44df4e8e65a498bc79e01ae8c08e1e321dd3fae9ed3bc87b81a6f +size 32607 diff --git a/detail_png/Shaft_03844_title.png b/detail_png/Shaft_03844_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f6f2c9062d6033e7771b72049c8a3b90563dbaaf --- /dev/null +++ b/detail_png/Shaft_03844_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:060fce82fe270a72626d0ac5f21f4d0cc6cc3b8c5444e1462f755228a783d38a +size 28830 diff --git a/detail_png/Shaft_03845_diam.png b/detail_png/Shaft_03845_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6eb475a706e7f8cd8a1887bab5203b47985016f8 --- /dev/null +++ b/detail_png/Shaft_03845_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f93da818b7181c98a4800fca5762dd481f3ae85203156d9343af83913dc11bbc +size 20613 diff --git a/detail_png/Shaft_03845_length.png b/detail_png/Shaft_03845_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0eafd576ce1bdf54a7dd8b494eda72d4d9fb4ab7 --- /dev/null +++ b/detail_png/Shaft_03845_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6913637d9af2ddd57dbca09ab19d8f7207f925f6b717181a48fa34e7c1465b7 +size 16383 diff --git a/detail_png/Shaft_03845_title.png b/detail_png/Shaft_03845_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7a906ee15c65288917a1a8da69d20a3c0f5213e1 --- /dev/null +++ b/detail_png/Shaft_03845_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:432cab87d708aa75aa21706d0bcef048213e21bb500e003fc207c59ff1cc710d +size 16128 diff --git a/detail_png/Shaft_03846_diam.png b/detail_png/Shaft_03846_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d7b4336492a2faca8962807cf870d08fd222c2d3 --- /dev/null +++ b/detail_png/Shaft_03846_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:699ba680d22fd9ee2645fc85659d5e22d0238c1892ebc03e6d89d27871695a7c +size 24352 diff --git a/detail_png/Shaft_03846_length.png b/detail_png/Shaft_03846_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7ee587752e3e23da7f30f4fb3ff82b9b5c2c0025 --- /dev/null +++ b/detail_png/Shaft_03846_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34c659949ae75e66856b441336217a47a7ab776a189eab2b33f477dad0da4ba5 +size 20251 diff --git a/detail_png/Shaft_03846_title.png b/detail_png/Shaft_03846_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1887a7519d0d6d17a5d3be38f4994a90c0906554 --- /dev/null +++ b/detail_png/Shaft_03846_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3cebf91b91c989ea5f89920724e4366a8cc9dc59e31a9fffef5661dc59ea4a7 +size 22128 diff --git a/detail_png/Shaft_03850_diam.png b/detail_png/Shaft_03850_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..437d8e7f5ad0b89ab2bd5a8843d9639beccba61c --- /dev/null +++ b/detail_png/Shaft_03850_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a5226195625e20cbc1c5349eddf35eab2549b50e64fc6f14845bb915f861cbf +size 20691 diff --git a/detail_png/Shaft_03850_length.png b/detail_png/Shaft_03850_length.png new file mode 100644 index 0000000000000000000000000000000000000000..503d64bfce56ca48f75c819819c6735fe47f7371 --- /dev/null +++ b/detail_png/Shaft_03850_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:090e5a73eefa538134e51c3151b625a25d56f7ff958970f73a6be9817dc3f64b +size 23596 diff --git a/detail_png/Shaft_03850_title.png b/detail_png/Shaft_03850_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d2d8125df62b672279f056cbaf28911835973cde --- /dev/null +++ b/detail_png/Shaft_03850_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3495b7884c5d6ed0b91ffed9ee113541457800b2f73c635d05e25d42f5b62704 +size 36276 diff --git a/detail_png/Shaft_03857_diam.png b/detail_png/Shaft_03857_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..83a91799a3783add42c717126b4cd7011afc13cb --- /dev/null +++ b/detail_png/Shaft_03857_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:490ab146f8c867cad3677cf148ff6a910eb139c6c2ff569d1c6174c592635b71 +size 30359 diff --git a/detail_png/Shaft_03857_length.png b/detail_png/Shaft_03857_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a5115c9abfcbc7ebfb84a6a7520f8f7c330e7806 --- /dev/null +++ b/detail_png/Shaft_03857_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5cd60c7e78f36d7e26e4b04526bcf9fe6017345029e7948c0ec9e9794ab1b3e +size 23404 diff --git a/detail_png/Shaft_03857_title.png b/detail_png/Shaft_03857_title.png new file mode 100644 index 0000000000000000000000000000000000000000..108d3f265acef7da167dbfd0223ae609ee86f4d3 --- /dev/null +++ b/detail_png/Shaft_03857_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7197a329d2405c173e3042dea9e7bd7559b676fac6a59eaf6dae076c2001c5d +size 21847 diff --git a/detail_png/Shaft_03861_diam.png b/detail_png/Shaft_03861_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5650512895253cf9eca809ac4bf165f5cddd12a8 --- /dev/null +++ b/detail_png/Shaft_03861_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08ef654c69bf04db9bcb6c361b9d63f1729ec4501ece0bf9c9300c600c6a49ef +size 24874 diff --git a/detail_png/Shaft_03861_length.png b/detail_png/Shaft_03861_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3983d26340b9e4a32815a11eb28657c9be80cb40 --- /dev/null +++ b/detail_png/Shaft_03861_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30e0fbdb82825c8619670f7cb1d74738c9bef08dc1a42a2116e6612d8410a64b +size 20973 diff --git a/detail_png/Shaft_03861_title.png b/detail_png/Shaft_03861_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eac6df32d70498578c9286de9132fccb1e33c17c --- /dev/null +++ b/detail_png/Shaft_03861_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb4b8b66ede909e55ab85a1ae39e845d201b6324261b8f8abdba21876365ed6f +size 22975 diff --git a/detail_png/Shaft_03863_diam.png b/detail_png/Shaft_03863_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3ea5a972170160ba3ca13fbd2602293c076059f8 --- /dev/null +++ b/detail_png/Shaft_03863_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a058106f73eef47a38a00cc90a21beaba96921329dc857cc1c757ca44216c7f +size 25042 diff --git a/detail_png/Shaft_03863_length.png b/detail_png/Shaft_03863_length.png new file mode 100644 index 0000000000000000000000000000000000000000..44c8196ce627e2dc6d5f58371188c2236d855b45 --- /dev/null +++ b/detail_png/Shaft_03863_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28ac45e379adb744aee1fd7c452cc06802978d304fefc2b5399412b8b55ce968 +size 20984 diff --git a/detail_png/Shaft_03863_title.png b/detail_png/Shaft_03863_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c13bda5a345f0e3c0458cee88664a4a6430804ec --- /dev/null +++ b/detail_png/Shaft_03863_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63b56cef46177fc4894e2cba149e3672b97e5a53b7dc9e4a9471a51801b3ffa2 +size 15739 diff --git a/detail_png/Shaft_03865_diam.png b/detail_png/Shaft_03865_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..930cc5b195b005fe8ae7bcfc3915f45db9a3374a --- /dev/null +++ b/detail_png/Shaft_03865_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3cb68b124eca58fc0d494b85ffa830cd5ac8b909daf4499f9c809c6a49551ba +size 19912 diff --git a/detail_png/Shaft_03865_length.png b/detail_png/Shaft_03865_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d6f1c7dae595f2d1649b6a39ab3145cea4ca10e1 --- /dev/null +++ b/detail_png/Shaft_03865_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddc4a063580313c4294ccfa0bbf12d237b5ef0b2af188395519990af00d86681 +size 19451 diff --git a/detail_png/Shaft_03865_title.png b/detail_png/Shaft_03865_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cb6938a3ce28875226a1a351b0fefd07cf703d14 --- /dev/null +++ b/detail_png/Shaft_03865_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17bc554400f1ac49ae89cee4841c1e8b63170b51ed9db3ab2d7db34ada57bb87 +size 27990 diff --git a/detail_png/Shaft_03866_diam.png b/detail_png/Shaft_03866_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ee4d27698bba6526f2187bb46db5cda64a1fe1aa --- /dev/null +++ b/detail_png/Shaft_03866_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ae77aaac715c48a9a0ea597e32ea35a0d2db19020521cc4a9601bf45e012f39 +size 26477 diff --git a/detail_png/Shaft_03866_length.png b/detail_png/Shaft_03866_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fac24992f53ada07eeabd0441ec2eda6a7946615 --- /dev/null +++ b/detail_png/Shaft_03866_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbf85640f2a1e6901711f56e666fa0f9095168e092472b27652d91ad804374aa +size 33588 diff --git a/detail_png/Shaft_03866_title.png b/detail_png/Shaft_03866_title.png new file mode 100644 index 0000000000000000000000000000000000000000..43c6ea7d52c587fcaa634838d500eb221e2f56c7 --- /dev/null +++ b/detail_png/Shaft_03866_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:443369448ac4301dd51645eaaafbd9fcb2a94e0c37d97531182e338d80b6734a +size 33947 diff --git a/detail_png/Shaft_03867_diam.png b/detail_png/Shaft_03867_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..be3c03cf54e46138ebe60953289063445910306c --- /dev/null +++ b/detail_png/Shaft_03867_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db8fbd18729cea16459a42e69d431003056b24ef9b904012f4f4cfd480592c43 +size 20583 diff --git a/detail_png/Shaft_03867_length.png b/detail_png/Shaft_03867_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e21bb7ab1b571436e3d0a446f61125e9142fe2b5 --- /dev/null +++ b/detail_png/Shaft_03867_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1326f0bc67509df9bb52959a036c9e9d7a3c1180b3dcfeb9935c57871e268de +size 18019 diff --git a/detail_png/Shaft_03867_title.png b/detail_png/Shaft_03867_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3bcce111acc11cf6071c8e63efe90b04392c0cae --- /dev/null +++ b/detail_png/Shaft_03867_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3069a0779de306ad2137f832fa5f2a7bb75ed1db4140e35cf81970935a901bae +size 18865 diff --git a/detail_png/Shaft_03869_diam.png b/detail_png/Shaft_03869_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c45cbcc278650cd7cd7fd1a9d6ebae521057ce5e --- /dev/null +++ b/detail_png/Shaft_03869_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e3e53a0756ede639faae6e22e4b01e8c81ef4ad59b9de5538d0902a060e8163 +size 25282 diff --git a/detail_png/Shaft_03869_length.png b/detail_png/Shaft_03869_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dbf71c569cb729960e10f6b964da4a56e445a46a --- /dev/null +++ b/detail_png/Shaft_03869_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b502e676c81937c8f540de019e0818e22bed6b90e66097d29cdd6d9d0887b42a +size 27886 diff --git a/detail_png/Shaft_03869_title.png b/detail_png/Shaft_03869_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c79d30a4c659626d2aed70472cfd6392adbfc28c --- /dev/null +++ b/detail_png/Shaft_03869_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75a4a1697f49968629390b5805c5acaaf0c31e7eb82f463143feaa29303b83dc +size 37052 diff --git a/detail_png/Shaft_03880_diam.png b/detail_png/Shaft_03880_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a34309655b8dd2e70066fb0630bea7b960285213 --- /dev/null +++ b/detail_png/Shaft_03880_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20f1cd132a98ba935c5cead46e4fa62fd214623de8874699b9242496bf7b1f4c +size 24049 diff --git a/detail_png/Shaft_03880_length.png b/detail_png/Shaft_03880_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b17eb094b5e7bb640729e451afae1538a6e7029f --- /dev/null +++ b/detail_png/Shaft_03880_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e285dd9c248106d12312f75fbf416e9b85285554e3a8cb0b639b97481bd62328 +size 30395 diff --git a/detail_png/Shaft_03880_title.png b/detail_png/Shaft_03880_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c31b6f02451ea1e41e82d9ac9f044b5e1719113a --- /dev/null +++ b/detail_png/Shaft_03880_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa89ff9721842ff68860face2d8bbc2f80d210b6afd30a2669a6929dfec3e9b1 +size 33504 diff --git a/detail_png/Shaft_03883_diam.png b/detail_png/Shaft_03883_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..eda2b6c3598d5ed7c746e6cd1dcab6d32a2bb2cd --- /dev/null +++ b/detail_png/Shaft_03883_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:511b915cb5a240698451e2977067d87da571dc1feb0d2c79c2ea758064e9579e +size 18673 diff --git a/detail_png/Shaft_03883_length.png b/detail_png/Shaft_03883_length.png new file mode 100644 index 0000000000000000000000000000000000000000..836af1d7034ac3bf0cf373650075a064f1d2a6d9 --- /dev/null +++ b/detail_png/Shaft_03883_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bae29ddf3de4e723ae2537a165f683ff6d2b40d255c182b14085fa982fb67d2 +size 21040 diff --git a/detail_png/Shaft_03883_title.png b/detail_png/Shaft_03883_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6dfbffceaeb706660c11cfc229c75f1f0500fc63 --- /dev/null +++ b/detail_png/Shaft_03883_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9814bcebdb8a17e7cc1a80dd6f293aafed943e2d883ff19f102057cbf9b5a79 +size 33446 diff --git a/detail_png/Shaft_03892_diam.png b/detail_png/Shaft_03892_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a7354623683cfdfecfeddbb86fbbf4d31eaacf94 --- /dev/null +++ b/detail_png/Shaft_03892_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31cca4b05f2425c2d6f4cd94dd680bb19640a2e710da67425206714b9c1ad45a +size 28865 diff --git a/detail_png/Shaft_03892_length.png b/detail_png/Shaft_03892_length.png new file mode 100644 index 0000000000000000000000000000000000000000..45dfb318502f65bebef71be1ee3991fbdef5bc1f --- /dev/null +++ b/detail_png/Shaft_03892_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a53ca56c68263a622152deb2cf3791b06702d38c28574026ea5c1f49a974838 +size 31857 diff --git a/detail_png/Shaft_03892_title.png b/detail_png/Shaft_03892_title.png new file mode 100644 index 0000000000000000000000000000000000000000..149c8b96226d946cfab1afb3d044168450f294aa --- /dev/null +++ b/detail_png/Shaft_03892_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:488f807c96cf43f295e68f80cb4216028956acc74603036aef23d8cebe8c8e03 +size 31191 diff --git a/detail_png/Shaft_03895_diam.png b/detail_png/Shaft_03895_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a15cbe88b964f7881de1ebccea5c8b9e4718f464 --- /dev/null +++ b/detail_png/Shaft_03895_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e8ce13ca71faef59c467c4954380c2b77d5b47d371e9c39799331aeedc2e3f2 +size 25837 diff --git a/detail_png/Shaft_03895_length.png b/detail_png/Shaft_03895_length.png new file mode 100644 index 0000000000000000000000000000000000000000..da54377fee4255a1ec7f907e872cff4d2c47f03b --- /dev/null +++ b/detail_png/Shaft_03895_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b37abedd80d0eb272c51c1ba198328d05277a21cdb5fe90b365e43255d524eda +size 36335 diff --git a/detail_png/Shaft_03895_title.png b/detail_png/Shaft_03895_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3256f6dbf40bbbdb637cee32c6a0defc24b156c7 --- /dev/null +++ b/detail_png/Shaft_03895_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc0aee41dfa55c30b658c7dbe6bfdd91fe981089c43dedd5942beffbe051849c +size 30821 diff --git a/detail_png/Shaft_03902_diam.png b/detail_png/Shaft_03902_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e3e8646222c00c261bc1bd791eeafbbdd069e008 --- /dev/null +++ b/detail_png/Shaft_03902_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:554f3787b4a22196b506bae217f4c06888ca5028c0dccb82fc432880fb4ce02e +size 18936 diff --git a/detail_png/Shaft_03902_length.png b/detail_png/Shaft_03902_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e4c79474f7a494c82f8a1a8fc14e7a354ee61d57 --- /dev/null +++ b/detail_png/Shaft_03902_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05d6f4f8a8f765f230833822f47e2f7952a1fc759cee4ca99737833900625024 +size 14462 diff --git a/detail_png/Shaft_03902_title.png b/detail_png/Shaft_03902_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f9457b3a80a8356e2e8aa210e65c247d70bc78c5 --- /dev/null +++ b/detail_png/Shaft_03902_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:606988012f925bb23eb63e07e37862a4944c14c275bb12b9d5796ea4432842a1 +size 15352 diff --git a/detail_png/Shaft_03904_diam.png b/detail_png/Shaft_03904_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..34812a22355d9d0baf3200ee59bb688042644efe --- /dev/null +++ b/detail_png/Shaft_03904_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7584ec508e9cc2145a9bbadec35964f91d33bd86ed56d55828c77a73f5809c22 +size 19212 diff --git a/detail_png/Shaft_03904_length.png b/detail_png/Shaft_03904_length.png new file mode 100644 index 0000000000000000000000000000000000000000..40aed64332c58a98851eb82271484a92174bc3b4 --- /dev/null +++ b/detail_png/Shaft_03904_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ea92f8a5ef7afe4feb6091bc1d090eab271748f98447c5ec4d4fb4a9d4d1960 +size 16169 diff --git a/detail_png/Shaft_03904_title.png b/detail_png/Shaft_03904_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2bd663e1255928effc65daecbd9f26a3dd2be3d3 --- /dev/null +++ b/detail_png/Shaft_03904_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cd073ce469206a2c223c2bbf1e88c6365d9ebe886fd9323ec34024dc15a69c2 +size 16397 diff --git a/detail_png/Shaft_03906_diam.png b/detail_png/Shaft_03906_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..919ef36da9640b8c00587c022878e72032237f66 --- /dev/null +++ b/detail_png/Shaft_03906_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57547354d03634a3441892e8fa3d3f94ac3677fbe2211dd86a76f5b7e1280e66 +size 27775 diff --git a/detail_png/Shaft_03906_length.png b/detail_png/Shaft_03906_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7b9aff4f3fb0fbd0835f9cce5392b61e45c29c21 --- /dev/null +++ b/detail_png/Shaft_03906_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:368f0305e31b08703bb578ffa0ba0ea88dcdf0944f0914897d30550c77374517 +size 35358 diff --git a/detail_png/Shaft_03906_title.png b/detail_png/Shaft_03906_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e925a85ee5f60933adb7102eb3a7dc42f069eca6 --- /dev/null +++ b/detail_png/Shaft_03906_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2455d4148fd664f557c56863a981bdecdc42fe9e82124739d37ff2be5f1a6aa +size 30723 diff --git a/detail_png/Shaft_03907_diam.png b/detail_png/Shaft_03907_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b4addd2d471fa045625e59742a1f30baacdae61d --- /dev/null +++ b/detail_png/Shaft_03907_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c50c8aa5bccacdfca3da75bf32aa5ba7be9a258d96505d020eee0bf24fd43446 +size 19653 diff --git a/detail_png/Shaft_03907_length.png b/detail_png/Shaft_03907_length.png new file mode 100644 index 0000000000000000000000000000000000000000..36fb041fd69ebd66af912f5df32e192dc239debd --- /dev/null +++ b/detail_png/Shaft_03907_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fd95e13a43721e4dbe102ef14aeac7fbadcc211816c3fc8960429733c5462ea +size 24642 diff --git a/detail_png/Shaft_03907_title.png b/detail_png/Shaft_03907_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2c44009bb920a97ef8233014c4c1e10638d72d2d --- /dev/null +++ b/detail_png/Shaft_03907_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8264cd5cbf87fcd19051d219c85d74509c53d3bc902517b354efa94c795d511 +size 30495 diff --git a/detail_png/Shaft_03912_diam.png b/detail_png/Shaft_03912_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..11bbe1e687f66eb54fb09fec26eac46df3b50113 --- /dev/null +++ b/detail_png/Shaft_03912_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:443a9626febe59d2e73ea9ebeccd5ccf1d567f5123b446c7f4acb8e341d5519a +size 20072 diff --git a/detail_png/Shaft_03912_length.png b/detail_png/Shaft_03912_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6dfce13bdf4cf4bbd44912bb48b33863aebc3a16 --- /dev/null +++ b/detail_png/Shaft_03912_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:197bf0c76d970f26674ec0bb162d7d52a7eca348a5c923a430e5ec6c8dce14b5 +size 20240 diff --git a/detail_png/Shaft_03912_title.png b/detail_png/Shaft_03912_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1f95192d77e26447fef9ea5d5b764d44a3bb5fdf --- /dev/null +++ b/detail_png/Shaft_03912_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3a4e251eeec11497c13ff92d3d52967b409de2c8186eb038fc6a71d10bf6903 +size 29574 diff --git a/detail_png/Shaft_03919_diam.png b/detail_png/Shaft_03919_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..63e99a490f0b5167d8d735941a7579bdffe5f089 --- /dev/null +++ b/detail_png/Shaft_03919_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d96eb47b771a32d2a6f6bcbdaedeefbeb2bd59fb9d3e46cdbd8fc2d3daff9c5 +size 30008 diff --git a/detail_png/Shaft_03919_length.png b/detail_png/Shaft_03919_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cb694d974f918a1b00e65cc0b81a98d45f93856f --- /dev/null +++ b/detail_png/Shaft_03919_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b28c511791966a6ef6f26565b6c4bae0611fa3ada9310ce941fa8f9f517b826 +size 29137 diff --git a/detail_png/Shaft_03919_title.png b/detail_png/Shaft_03919_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fb593e58361ef66387dbb177be49f19cf6d28e35 --- /dev/null +++ b/detail_png/Shaft_03919_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a979b3a1355f01ac3a29d37d6a17ad58e75126a25fc5b324525911871202bbe +size 29472 diff --git a/detail_png/Shaft_03921_diam.png b/detail_png/Shaft_03921_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5ea8d460e84ac50b83898a5811f1c416868586b6 --- /dev/null +++ b/detail_png/Shaft_03921_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9de10fea0dee27351432ceee3dab65578838e3765a2032270238d918ddeac88 +size 23772 diff --git a/detail_png/Shaft_03921_length.png b/detail_png/Shaft_03921_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0f97c3021ff202b428e6709ea667b6ceb6a40a46 --- /dev/null +++ b/detail_png/Shaft_03921_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22a388df29bd96431ea5332233a7bc8e764a95747eeae9c02500d1dec80cabee +size 22567 diff --git a/detail_png/Shaft_03921_title.png b/detail_png/Shaft_03921_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f0b85d0d7e1f50d35f5b4f8765788b493f1ab57b --- /dev/null +++ b/detail_png/Shaft_03921_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6450939848a5a241e0525f0a873ec09ff4a958406a69b308a2097c2fb57bd0ea +size 27907 diff --git a/detail_png/Shaft_03936_diam.png b/detail_png/Shaft_03936_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e4af07f1d840ffe6999564de5999de8a3728d635 --- /dev/null +++ b/detail_png/Shaft_03936_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0416860ed2745e9cb8641f7fde34bbf43b03246b42448ec4848ee53c2fc70349 +size 25374 diff --git a/detail_png/Shaft_03936_length.png b/detail_png/Shaft_03936_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5f1a41a902507582905e6386508c1e5d6616bbfd --- /dev/null +++ b/detail_png/Shaft_03936_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51c312aa1a2a57ff12b7d9db88e0b5e4db647779b2f2f6f69d17cb78e732eeb9 +size 24048 diff --git a/detail_png/Shaft_03936_title.png b/detail_png/Shaft_03936_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c66d208879ffa41d15dc6111270799cd3f88ba9a --- /dev/null +++ b/detail_png/Shaft_03936_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94f52cf6762a815fca78d2d81ac217f16dc81e3a180d8ea00902ecaa2fe88b4c +size 29992 diff --git a/detail_png/Shaft_03937_diam.png b/detail_png/Shaft_03937_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8944b0c2b885dd6b201f0a023cd7a17475b0bcff --- /dev/null +++ b/detail_png/Shaft_03937_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15348c848157d5546b80a79bea47d6310b5affe935857642b8fdc790466f623a +size 19354 diff --git a/detail_png/Shaft_03937_length.png b/detail_png/Shaft_03937_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6445669af0c2e5435f1701a483e3e464eda53a30 --- /dev/null +++ b/detail_png/Shaft_03937_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:196a2b2285725b05ed7691ae4867c652b07aa6ee8da4bd11263290884b48b6e6 +size 18591 diff --git a/detail_png/Shaft_03937_title.png b/detail_png/Shaft_03937_title.png new file mode 100644 index 0000000000000000000000000000000000000000..814581bca61cf572df8b5d4dd3b5c4a5986c8b39 --- /dev/null +++ b/detail_png/Shaft_03937_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccfa60facfa667fa8416b3598b43101a0f84684b0feb699bc6a0118f19de1a27 +size 26262 diff --git a/detail_png/Shaft_03938_diam.png b/detail_png/Shaft_03938_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0daeb1d8e76ae514287f7dd3d976b8fcbc57b73c --- /dev/null +++ b/detail_png/Shaft_03938_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd2250e1d3f02b59a2a907743129b2cfeb1a1858eca4784fcee5e30368ef7f02 +size 20864 diff --git a/detail_png/Shaft_03938_length.png b/detail_png/Shaft_03938_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7bb75b265a50b00dfc2cad48352083a35ed3f2f8 --- /dev/null +++ b/detail_png/Shaft_03938_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49f599fd666c608f8e2c0002f2744f8290fb906aa70f7d22b16fc9d2c37600d0 +size 18466 diff --git a/detail_png/Shaft_03938_title.png b/detail_png/Shaft_03938_title.png new file mode 100644 index 0000000000000000000000000000000000000000..65205a11c1ae07757f7c40b87b8cc5f6b0dfc1bc --- /dev/null +++ b/detail_png/Shaft_03938_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24c4e6b6e0b73d471db91818fd99e11c43d63f9603e4d5107372e275c5637120 +size 26953 diff --git a/detail_png/Shaft_03940_diam.png b/detail_png/Shaft_03940_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..36ece3965669e31ce63d2421e4dee69b87e329ae --- /dev/null +++ b/detail_png/Shaft_03940_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b0dff448a82ac4f0c452732b4cf91216b94010731857d63dda9ef1cd146c94d +size 37248 diff --git a/detail_png/Shaft_03940_length.png b/detail_png/Shaft_03940_length.png new file mode 100644 index 0000000000000000000000000000000000000000..02efb9e180fa7d6088ee9e79816df2289fc780d1 --- /dev/null +++ b/detail_png/Shaft_03940_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbb95d889e9c4472af3e65b94e0afc0dbfcb18739da4c3e7972764b44ab1ad38 +size 51862 diff --git a/detail_png/Shaft_03940_title.png b/detail_png/Shaft_03940_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e38b14559bca60f9448077873bce1b495111d82b --- /dev/null +++ b/detail_png/Shaft_03940_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62bc2d7a3c319022b6373b8151f7c22251d1c93dd72141fc954ef7acb9538bc4 +size 30662 diff --git a/detail_png/Shaft_03941_diam.png b/detail_png/Shaft_03941_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97801c2391b2412dc88646e509683075ab5911f4 --- /dev/null +++ b/detail_png/Shaft_03941_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6540d5343fa0e00272c0301debd2f58d6be2130d406729bb5c854375d1bc2a9 +size 29747 diff --git a/detail_png/Shaft_03941_length.png b/detail_png/Shaft_03941_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c306c7341aca971c77dc21914eaeea6c21ea1e8a --- /dev/null +++ b/detail_png/Shaft_03941_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:725cf2994ec9f62591f4be812d7ec787b6269c0346cc730f8c80c43a894f8e30 +size 32035 diff --git a/detail_png/Shaft_03941_title.png b/detail_png/Shaft_03941_title.png new file mode 100644 index 0000000000000000000000000000000000000000..493a33772a5346a20dc64a20baee5ee5894d401b --- /dev/null +++ b/detail_png/Shaft_03941_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b67ae81dcf68417f0d64573b8ac3394916b4ccc7b0ff733b58d2e5516143d05 +size 34935 diff --git a/detail_png/Shaft_03944_diam.png b/detail_png/Shaft_03944_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f7525eee0a48876c838a453a11a3e82365223b77 --- /dev/null +++ b/detail_png/Shaft_03944_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c452a93eff54cfe1d7f980cfde995db3f8c12ffccc05e373e6aa2aca18f9e67 +size 19987 diff --git a/detail_png/Shaft_03944_length.png b/detail_png/Shaft_03944_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6223e782f47bd6a6627665e096d577f6c9732d7d --- /dev/null +++ b/detail_png/Shaft_03944_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94f28542386ba297cd922ddc8cc79bb1080bd44226a90e39ca4f9468ca572507 +size 21226 diff --git a/detail_png/Shaft_03944_title.png b/detail_png/Shaft_03944_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b63aa190983a7fb032bdd4f31409f1fd2cb669ce --- /dev/null +++ b/detail_png/Shaft_03944_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f338ceda3ed39ad59410f49fb01cb4c870f1dd31ef310fc8b9bfa475613c7b91 +size 35134 diff --git a/detail_png/Shaft_03945_diam.png b/detail_png/Shaft_03945_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2daabd5cb536e5fcb712c1298a0695da659d6d9b --- /dev/null +++ b/detail_png/Shaft_03945_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:868eb78181c066b80d518cdac39aca13fb0d74cc6a9d3c9680d974f11043bf4b +size 32582 diff --git a/detail_png/Shaft_03945_length.png b/detail_png/Shaft_03945_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dfbce6d9274300fc0a7c4e3434307218a9b59646 --- /dev/null +++ b/detail_png/Shaft_03945_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79df743548f27c14048cfe6bd631804e147883f2071fdd14e18d400f6d035711 +size 35769 diff --git a/detail_png/Shaft_03945_title.png b/detail_png/Shaft_03945_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c8325edb77d543f98887d3626c8f2fd6fd1771eb --- /dev/null +++ b/detail_png/Shaft_03945_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb9c86e4fffa6f9f713a6d0832d68907e18816730515be801b01c4d7768ac68c +size 30110 diff --git a/detail_png/Shaft_03950_diam.png b/detail_png/Shaft_03950_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fff3f1f85a8455e2ab8879190c36dc70aac507f9 --- /dev/null +++ b/detail_png/Shaft_03950_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9e2abdecce1c0416bcc73baafee8a76826997557c70bb6c7a5526b94acfdf54 +size 34377 diff --git a/detail_png/Shaft_03950_length.png b/detail_png/Shaft_03950_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fcd54ae616727cfaf65a5a39d1abc25dd9c83434 --- /dev/null +++ b/detail_png/Shaft_03950_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f067a6367501e4a8fb3b1cf7ed0d6e7fef129ecd69f0e9e67578803c6b2e9d7 +size 29463 diff --git a/detail_png/Shaft_03950_title.png b/detail_png/Shaft_03950_title.png new file mode 100644 index 0000000000000000000000000000000000000000..46fd0c3818d41aa9e568e1823ba857f011634bfd --- /dev/null +++ b/detail_png/Shaft_03950_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86fbeb03b15be4ef7568203c440bd5b38e8aa2564228fa7796e4536f1bb060fd +size 36375 diff --git a/detail_png/Shaft_03951_diam.png b/detail_png/Shaft_03951_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3be08c6bad7b9745618c759c69dfeaac8d84da35 --- /dev/null +++ b/detail_png/Shaft_03951_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce399a17e21e20ac9bbbbe36d6f8f82be7d79077437c4af55bd346efb667a1ee +size 23899 diff --git a/detail_png/Shaft_03951_length.png b/detail_png/Shaft_03951_length.png new file mode 100644 index 0000000000000000000000000000000000000000..30e86ae152a802c0f6727704cabaa7e6c497c993 --- /dev/null +++ b/detail_png/Shaft_03951_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13ce11015fa4a73fd02b2175cb145205bd146d3c6c491c4132ba73b681fb790f +size 29869 diff --git a/detail_png/Shaft_03951_title.png b/detail_png/Shaft_03951_title.png new file mode 100644 index 0000000000000000000000000000000000000000..931be2ab8bb83f8f94d548e7a71e82392c803c70 --- /dev/null +++ b/detail_png/Shaft_03951_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74aa32669a29e62a5cd36a13894a974db9285082ddb7ff80730e08fd226b698b +size 29311 diff --git a/detail_png/Shaft_03953_diam.png b/detail_png/Shaft_03953_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8e1149293ab53d8f1af58a9e6f2cad29c4e4584d --- /dev/null +++ b/detail_png/Shaft_03953_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:579c26f1dcc8b00c54153d53a402fa3f3b2f9c992094ebbbf596eddae20d0a5a +size 19235 diff --git a/detail_png/Shaft_03953_length.png b/detail_png/Shaft_03953_length.png new file mode 100644 index 0000000000000000000000000000000000000000..46bc9ed3524740c4332b6a61b25d6aa64e88cb87 --- /dev/null +++ b/detail_png/Shaft_03953_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69ccd591f0ff4f617b06429f97dbc8e23c3f2620af37778583cff30ea0634750 +size 19339 diff --git a/detail_png/Shaft_03953_title.png b/detail_png/Shaft_03953_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fa5ab60eb23dff3e56bbd9255876a8db341f35bc --- /dev/null +++ b/detail_png/Shaft_03953_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05812257c45cbe8d110a3079d9e0f9e5cad1fda5bb1044b103c830d8753beed4 +size 30794 diff --git a/detail_png/Shaft_03954_diam.png b/detail_png/Shaft_03954_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..214ea4a8c8611f989969130f5c01769e88e73f5a --- /dev/null +++ b/detail_png/Shaft_03954_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c311103591d5066511b3c38deea41732d1eddc3581fe124a20c80dd484be3ea +size 20648 diff --git a/detail_png/Shaft_03954_length.png b/detail_png/Shaft_03954_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bae7c0c8d4e48b4053d9e346ae6c4554782cfe23 --- /dev/null +++ b/detail_png/Shaft_03954_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a04a07926ebff90fcd4d4a227d3ec6b4a8f2332a95b8e41d1858a898bcd09dcd +size 21257 diff --git a/detail_png/Shaft_03954_title.png b/detail_png/Shaft_03954_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dd39a0a381869bc3813313019ca59c1b320b3dad --- /dev/null +++ b/detail_png/Shaft_03954_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fdcc766f2fbfdcf1c106e77fdbf5a4f7f88a1cf48c73291758134e09aa7d0af1 +size 28775 diff --git a/detail_png/Shaft_03956_diam.png b/detail_png/Shaft_03956_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7c9434941e8b986ce1efed6677da532c6c4060eb --- /dev/null +++ b/detail_png/Shaft_03956_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e29ec69a09c2d3b3115c91823b1c3e48be43ebe8ed5a988e654899c5f45ef79 +size 19640 diff --git a/detail_png/Shaft_03956_length.png b/detail_png/Shaft_03956_length.png new file mode 100644 index 0000000000000000000000000000000000000000..decaf5be31f55f6c744ae672bbb559ffe9cbd34b --- /dev/null +++ b/detail_png/Shaft_03956_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:addb4513f8731d05bf7f417bb421c19237f4a62b19d8da14b781d52100186b4e +size 25701 diff --git a/detail_png/Shaft_03956_title.png b/detail_png/Shaft_03956_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e866dc5a79546e4ee21169ed11b4bb0099947aa1 --- /dev/null +++ b/detail_png/Shaft_03956_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02ac6e2a805d9016c73e877773baa79a169bbbbce73cd016d7415c1fca227364 +size 33389 diff --git a/detail_png/Shaft_03958_diam.png b/detail_png/Shaft_03958_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25e342ca7cbc0c8529ec0452fe66f96bbceaf031 --- /dev/null +++ b/detail_png/Shaft_03958_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfbfc827a151394f89d245049d9edea7c478d28c15cc533a36c7879c078c015c +size 24297 diff --git a/detail_png/Shaft_03958_length.png b/detail_png/Shaft_03958_length.png new file mode 100644 index 0000000000000000000000000000000000000000..edd7e8e5c0157d5021e510361c3d0b8e640858d1 --- /dev/null +++ b/detail_png/Shaft_03958_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef47be2f7255d8251158fb966707b0050e79a45a66f135b6627ee8bdbc4c1cd7 +size 33880 diff --git a/detail_png/Shaft_03958_title.png b/detail_png/Shaft_03958_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d84a4b58102b7c2c4abd722e6c5e836ee4b8c6a2 --- /dev/null +++ b/detail_png/Shaft_03958_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7744031de20e788577b7834372405ecefa68b5777dc8c6c00577b4875468959d +size 33915 diff --git a/detail_png/Shaft_03960_diam.png b/detail_png/Shaft_03960_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48d39de8d0541f98fcd4311f486afa72b16a0a9a --- /dev/null +++ b/detail_png/Shaft_03960_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80d66350afe3950b8c1895ab9d902b72629b562b8239b77d36a75c9f8bd86a46 +size 20457 diff --git a/detail_png/Shaft_03960_length.png b/detail_png/Shaft_03960_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a9929fbd682d980ba3ba773fb1b54ecd26c498e9 --- /dev/null +++ b/detail_png/Shaft_03960_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c84073d06deb7de273d142ed74192883d75a52595ce7d269c3923250e700a8b +size 20035 diff --git a/detail_png/Shaft_03960_title.png b/detail_png/Shaft_03960_title.png new file mode 100644 index 0000000000000000000000000000000000000000..15184c9425f8d8734efac74ea6cb0d0f5b647c45 --- /dev/null +++ b/detail_png/Shaft_03960_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab6a9515313af5c57c6b15d64bb4275deb03bf1825acb46ea14a721baa8d3947 +size 27379 diff --git a/detail_png/Shaft_03961_diam.png b/detail_png/Shaft_03961_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d39d07de3cf1ab5d0b206f0f3eeae0a8c698a595 --- /dev/null +++ b/detail_png/Shaft_03961_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df4be357323e19a2d36a4da5bd0ba3b4d46af6b81f30921084bdec8a85900e1f +size 35428 diff --git a/detail_png/Shaft_03961_length.png b/detail_png/Shaft_03961_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ef0abdb1a5fd8697f3f9f6254749647a0bdf32fe --- /dev/null +++ b/detail_png/Shaft_03961_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:699f89a73eee5d9e217a29296c16ffb1c5a0a55db35211e057793003a835b65c +size 37137 diff --git a/detail_png/Shaft_03961_title.png b/detail_png/Shaft_03961_title.png new file mode 100644 index 0000000000000000000000000000000000000000..eddc416ab864ba6d301fc18d0bbc1b6821f9aa75 --- /dev/null +++ b/detail_png/Shaft_03961_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc2f1195664afb75bc0a00f2d6165e5fe5b66902631c2b38a51847bbd33bb8bd +size 32505 diff --git a/detail_png/Shaft_03962_diam.png b/detail_png/Shaft_03962_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e3c8e66d1d28cf75bd8e08392c13bd5e4d63120a --- /dev/null +++ b/detail_png/Shaft_03962_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8003c17db017a8ab5706d870a2765aef019370c9eb3813c627dbd4a0873f5c7d +size 25803 diff --git a/detail_png/Shaft_03962_length.png b/detail_png/Shaft_03962_length.png new file mode 100644 index 0000000000000000000000000000000000000000..21704d6e022dff25011e2abd221bb6234b270a9a --- /dev/null +++ b/detail_png/Shaft_03962_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a46d77102c38decdaaebca9a720639c0e6712583f8168c143b041833985da321 +size 19723 diff --git a/detail_png/Shaft_03962_title.png b/detail_png/Shaft_03962_title.png new file mode 100644 index 0000000000000000000000000000000000000000..77623b8f79b772082e2bff58b062884424ecbec8 --- /dev/null +++ b/detail_png/Shaft_03962_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ec3445f210b7726cb996ffb1c5c060935e9c4d4fbf5f466f2960ed9677cb3a6 +size 21557 diff --git a/detail_png/Shaft_03966_diam.png b/detail_png/Shaft_03966_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..026e1a435aef53c7bbe11b8ef18a382f2cf620c7 --- /dev/null +++ b/detail_png/Shaft_03966_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1ace08881683da589c47750412665b6d18ec3eb52a8b0befc3a2b612c4d4b37 +size 20399 diff --git a/detail_png/Shaft_03966_length.png b/detail_png/Shaft_03966_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d1995847a76d592ef7bc4cd099b334267bc74b73 --- /dev/null +++ b/detail_png/Shaft_03966_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43ffb5e0715eaa0152bbd0917a356fc5d736421a3b91d8b02061e82567442e2f +size 16575 diff --git a/detail_png/Shaft_03966_title.png b/detail_png/Shaft_03966_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7f7cebb492fdf3c10fff3a2bbcb3c02a879c4a41 --- /dev/null +++ b/detail_png/Shaft_03966_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc2cc29fbd43d8864836194c3cdaa9e0ed347972c61ae71cc2257b8c2626b6b5 +size 17387 diff --git a/detail_png/Shaft_03969_diam.png b/detail_png/Shaft_03969_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1c997f647b1d3181205e1771367d2ca7dccb58e1 --- /dev/null +++ b/detail_png/Shaft_03969_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e0a5ac8cc38b2fb86457947b0b48f09aa6a2362fdc5e44dbc082c7753649abc +size 20309 diff --git a/detail_png/Shaft_03969_length.png b/detail_png/Shaft_03969_length.png new file mode 100644 index 0000000000000000000000000000000000000000..51647d06f74c485ee0edd9c492f99493b8b1f860 --- /dev/null +++ b/detail_png/Shaft_03969_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0faed8229876b30546fdfae6a36427b569077188f5981b2953e0f89a6a4f0a63 +size 15400 diff --git a/detail_png/Shaft_03969_title.png b/detail_png/Shaft_03969_title.png new file mode 100644 index 0000000000000000000000000000000000000000..63cd454e9c399ae7f381a321dcfaa2be5162215e --- /dev/null +++ b/detail_png/Shaft_03969_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7e6e7291342756049cead1434492fda5d179a0395ca1c16a352d9f71a4d07c3 +size 25783 diff --git a/detail_png/Shaft_03970_diam.png b/detail_png/Shaft_03970_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2e3c4e5785bd4909fb871649dcdc58e8f6aed392 --- /dev/null +++ b/detail_png/Shaft_03970_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3672db59ab7149fb8671aaaf0cd72300b6d8be99f76b39db7c307ea7b085456 +size 18537 diff --git a/detail_png/Shaft_03970_length.png b/detail_png/Shaft_03970_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b24e8732e5cfab3c1ad914dcbfd5e9e4ff3b5b55 --- /dev/null +++ b/detail_png/Shaft_03970_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf2e2f8ddcf589c64ed4d24bdc35f16fee9fe32a610d92c29219c66a2313ac8a +size 21106 diff --git a/detail_png/Shaft_03970_title.png b/detail_png/Shaft_03970_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e53d66487c72cc94d855de60f81d9cf4bbfabdfd --- /dev/null +++ b/detail_png/Shaft_03970_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85465fe4d4cbcf084330f011b4862d900c49df726d1a8f7a85cba5b4c709fa9b +size 32594 diff --git a/detail_png/Shaft_03974_diam.png b/detail_png/Shaft_03974_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..82d664a7a4e69e1a5bfc4294657fd4022a78c5d6 --- /dev/null +++ b/detail_png/Shaft_03974_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0a57fedfca04e2cb0c1835436d2533f175725ec90a1a2aadba0d4144be0377d +size 25775 diff --git a/detail_png/Shaft_03974_length.png b/detail_png/Shaft_03974_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3600f0463398df0e897d2a3017aecdec55e1abac --- /dev/null +++ b/detail_png/Shaft_03974_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1aab8cad13c3f7cc75b381881468a2e0dcb4629ebd0dd483282c7780cc17e281 +size 30297 diff --git a/detail_png/Shaft_03974_title.png b/detail_png/Shaft_03974_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f4053716ae29c054ec9fd3dfba119cc7791f9604 --- /dev/null +++ b/detail_png/Shaft_03974_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a53749fef753e39d1dfac14574d08023e378dde5adec7802c88a63a9747255a +size 31974 diff --git a/detail_png/Shaft_03979_diam.png b/detail_png/Shaft_03979_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b32c3a4ca584227ee0b1d328fe1f1bbe926eb327 --- /dev/null +++ b/detail_png/Shaft_03979_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6537250e2ecd9be33925d04c3aa323425bf66d5fe0bc5d4adb1994416bbeb8b7 +size 30507 diff --git a/detail_png/Shaft_03979_length.png b/detail_png/Shaft_03979_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c42c106c635afc133853b3d6099ea63abe7b9fe5 --- /dev/null +++ b/detail_png/Shaft_03979_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d119488151b00e6caf879da3b42703256324af407843b2363a413d46cce68a5b +size 28953 diff --git a/detail_png/Shaft_03979_title.png b/detail_png/Shaft_03979_title.png new file mode 100644 index 0000000000000000000000000000000000000000..22c19d7204e623c7c98c7530544ac2542c8b8b22 --- /dev/null +++ b/detail_png/Shaft_03979_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5cb1126d3b572cd20a90387fe3a3be0e7d02f1169e3b656b9191b4c73dc21803 +size 32860 diff --git a/detail_png/Shaft_03981_diam.png b/detail_png/Shaft_03981_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a3668e8091c800403efc868d91a54316d4e60774 --- /dev/null +++ b/detail_png/Shaft_03981_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:990574179b0402e9788025c25a8f4680d08460c17ade96396dbd6c578a2768f4 +size 35945 diff --git a/detail_png/Shaft_03981_length.png b/detail_png/Shaft_03981_length.png new file mode 100644 index 0000000000000000000000000000000000000000..383548b9b602d1fcb10f59fbeac264af85ade344 --- /dev/null +++ b/detail_png/Shaft_03981_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7115d1ae5e116c39153558bbf548de1672824b1250463d609b839054332d6de2 +size 44801 diff --git a/detail_png/Shaft_03981_title.png b/detail_png/Shaft_03981_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e81c420210e5bc78354ab27002c5dd6a3ed29f46 --- /dev/null +++ b/detail_png/Shaft_03981_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:375e602d84e2d0917987bfc5fe09946ddea25cf990cc51393ed2f80e2d7f4d0f +size 30612 diff --git a/detail_png/Shaft_03986_diam.png b/detail_png/Shaft_03986_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b1fe99a0cbbe6e21d49556a230312b0b32e33edd --- /dev/null +++ b/detail_png/Shaft_03986_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:697f348c254ab4d35fd69d5bdf1cda1daf8675981a507318f8ef9a4eb94a5921 +size 37993 diff --git a/detail_png/Shaft_03986_length.png b/detail_png/Shaft_03986_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d3b83993b404f79d3fb33d94c88fe78e7b565894 --- /dev/null +++ b/detail_png/Shaft_03986_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:707c4750b149a84bca2156f92ae0ddb69d6fcb9c1d53efd0b6816e8b848ddf20 +size 30079 diff --git a/detail_png/Shaft_03986_title.png b/detail_png/Shaft_03986_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31a1f3603a5d63d1552ea9c240f4fc84af9288e5 --- /dev/null +++ b/detail_png/Shaft_03986_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c92144032ca3a962017c1b7e570a8411c64c1452240308c0a9cf36ff235ed35 +size 28738 diff --git a/detail_png/Shaft_03988_diam.png b/detail_png/Shaft_03988_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f6a1ef8d932ef0b6c4a209fdb78da0ab935f0cd1 --- /dev/null +++ b/detail_png/Shaft_03988_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e30ab0d9ac98810797e8bbbad2375b9efa5ac2eeb0eeb35b706b8f7d6f4eb306 +size 34798 diff --git a/detail_png/Shaft_03988_length.png b/detail_png/Shaft_03988_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2aa72a21b7c11e11ecc2d020926bbcffe22f0997 --- /dev/null +++ b/detail_png/Shaft_03988_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc36f820c7150f203c8f7cfe9d4f376ba0c391c7aec3671910c6eee0ecd91491 +size 33633 diff --git a/detail_png/Shaft_03988_title.png b/detail_png/Shaft_03988_title.png new file mode 100644 index 0000000000000000000000000000000000000000..093e33624ab01409db3a31af6204ec7dd9f945c8 --- /dev/null +++ b/detail_png/Shaft_03988_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71edf483c31abd2c668d68e44142ed7286de3360d88388f21bbe2df7e9b3999b +size 33612 diff --git a/detail_png/Shaft_03989_diam.png b/detail_png/Shaft_03989_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d1d0b18084468ad17e88da7a73ff2847578ee3de --- /dev/null +++ b/detail_png/Shaft_03989_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90c4c20f4349f1b5bb1a8d2ac2d50390c13c8caf6dc099e6662d69ec08e91e61 +size 31586 diff --git a/detail_png/Shaft_03989_length.png b/detail_png/Shaft_03989_length.png new file mode 100644 index 0000000000000000000000000000000000000000..981f71aeff3d2f4e268375e6ec94f5ba7809de28 --- /dev/null +++ b/detail_png/Shaft_03989_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad2b677a8e7465211c05e95eacb8b5245044bc66632f1a46f069b113ffd27985 +size 31479 diff --git a/detail_png/Shaft_03989_title.png b/detail_png/Shaft_03989_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c52dd135e558dc8cc457ab173cdbb4e9876318e2 --- /dev/null +++ b/detail_png/Shaft_03989_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d8bf3f041b412efd0830ca4a97c3b902d57bea1e2e1c61dca8d29853e391061 +size 31393 diff --git a/detail_png/Shaft_03993_diam.png b/detail_png/Shaft_03993_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2e24e188263edb474e5af89151e64c42235b06cb --- /dev/null +++ b/detail_png/Shaft_03993_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d513c390eb5b134697071236bac796637a0451bea1023bbe08fdc4440de1c76e +size 28482 diff --git a/detail_png/Shaft_03993_length.png b/detail_png/Shaft_03993_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ae85d4b81e69247c3c158d8cc73dac3d46e0b057 --- /dev/null +++ b/detail_png/Shaft_03993_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e18ceb52b6b86443b2fdab5fc81bf890ef4eb952917f404a10414852965fc436 +size 27375 diff --git a/detail_png/Shaft_03993_title.png b/detail_png/Shaft_03993_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2feb590bee5a3d14896cf119061b032cf22c3a1c --- /dev/null +++ b/detail_png/Shaft_03993_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8b2830cbf9141d625a22fde15561e385e27db69e05acf175e9672473724382d +size 31099 diff --git a/detail_png/Shaft_03994_diam.png b/detail_png/Shaft_03994_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..349efa3b12868f993ccbd8d777b16c0efd09ba9c --- /dev/null +++ b/detail_png/Shaft_03994_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d77913496c99a99c9e08215da69807837faa42e978eaaaaaf293fb879eb4f0ed +size 31698 diff --git a/detail_png/Shaft_03994_length.png b/detail_png/Shaft_03994_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8cf1bef740136f030badf3ceb177979da39f9cb5 --- /dev/null +++ b/detail_png/Shaft_03994_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0afe57ab68857c963a4ca607f964eebde96bbd40948425192aa30b5ccd15b9b2 +size 38287 diff --git a/detail_png/Shaft_03994_title.png b/detail_png/Shaft_03994_title.png new file mode 100644 index 0000000000000000000000000000000000000000..27627221f4c7f9551d2148df1720fb735d0526d2 --- /dev/null +++ b/detail_png/Shaft_03994_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd89fd424f930569885c52b35db8b40ec78955bb9b4400532aa998c53222f86e +size 36507 diff --git a/detail_png/Shaft_03997_diam.png b/detail_png/Shaft_03997_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9470fccd0f05f033d807b4b49645ca4523dfae28 --- /dev/null +++ b/detail_png/Shaft_03997_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc651f5970746def681bc6819daa5c52550259ad973a7bd22fb42dd8d7f0313f +size 30310 diff --git a/detail_png/Shaft_03997_length.png b/detail_png/Shaft_03997_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cce60b6c9fd5202afa2139c4c245d6262ced7058 --- /dev/null +++ b/detail_png/Shaft_03997_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39a8e769ce8659fa7dd840b1bfc1966de9228a5c73027aaadef044eb487dcdb3 +size 30447 diff --git a/detail_png/Shaft_03997_title.png b/detail_png/Shaft_03997_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be21c4c25a61de163458d21ed7cf2f5e7489fb9a --- /dev/null +++ b/detail_png/Shaft_03997_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86307f02f7ce827a073430c34ad302d498bb82add04d2f0db323a2c7b9ac88c6 +size 30572 diff --git a/detail_png/Shaft_04000_diam.png b/detail_png/Shaft_04000_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d0f85bfa0b4781af33f11d65631f019c782a7d3e --- /dev/null +++ b/detail_png/Shaft_04000_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:695efeb653ab03aaa2b716450f7bfa7c84e0a15450d6e51a80a33d13aa0a8d5e +size 26587 diff --git a/detail_png/Shaft_04000_length.png b/detail_png/Shaft_04000_length.png new file mode 100644 index 0000000000000000000000000000000000000000..785b0279a4c1df80febc25387033fb288b9316b8 --- /dev/null +++ b/detail_png/Shaft_04000_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32558b2d043c3db3066bb8e0e236a38757b7bb5e9f97d759ff325e59e9574514 +size 24697 diff --git a/detail_png/Shaft_04000_title.png b/detail_png/Shaft_04000_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b1468b5320abdef7c25ce0e1f8fa0549a2848419 --- /dev/null +++ b/detail_png/Shaft_04000_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8e0778b5bf02e215b93d176a43bf252b5342d482e1bfe83e57a5471eea61bda +size 32041 diff --git a/detail_png/Shaft_04002_diam.png b/detail_png/Shaft_04002_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..de03586069c665e590a46e6d19e3907e41ee3666 --- /dev/null +++ b/detail_png/Shaft_04002_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f11fa515bb9af9372cdbbd9ce64e82b725e049d692176b349d4a71adc28faa1 +size 21449 diff --git a/detail_png/Shaft_04002_length.png b/detail_png/Shaft_04002_length.png new file mode 100644 index 0000000000000000000000000000000000000000..40ed4538dd84d9b08b60162ef14a7e8a15d3c990 --- /dev/null +++ b/detail_png/Shaft_04002_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d7187d27771331f225c10119725b64d0535d4a88410671cec811892a08c4942 +size 20630 diff --git a/detail_png/Shaft_04002_title.png b/detail_png/Shaft_04002_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bc076ac70731bd9081028af4b36f57db8118ed09 --- /dev/null +++ b/detail_png/Shaft_04002_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef57fadc76560643f1ceb6f0ac6a056835e5c6a90d859f951baae8c38cea029 +size 25738 diff --git a/detail_png/Shaft_04010_diam.png b/detail_png/Shaft_04010_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..984ad3188292f88f18df2d8542c1b3cfcf551aa4 --- /dev/null +++ b/detail_png/Shaft_04010_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962dda3f2558b4bb8b53d223b245df3b1a0d4a1e9d30facef887c5d0e0ccd95d +size 37838 diff --git a/detail_png/Shaft_04010_length.png b/detail_png/Shaft_04010_length.png new file mode 100644 index 0000000000000000000000000000000000000000..06e11574994a242a43b35172e0c8974f8f593e32 --- /dev/null +++ b/detail_png/Shaft_04010_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c126eb7b7297b4784eefec9479a86f2ccddda316aa19f882536f61991da74a50 +size 34879 diff --git a/detail_png/Shaft_04010_title.png b/detail_png/Shaft_04010_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fbb78507c7ca14adffcf000de7a7d929ca4394dd --- /dev/null +++ b/detail_png/Shaft_04010_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0edb354eaf796b417089012b9ec0c52beac27aa82779a346233df7952827e5a7 +size 33951 diff --git a/detail_png/Shaft_04012_diam.png b/detail_png/Shaft_04012_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a5749bfa9bf0d482b2d933b5bb967cd3753c8243 --- /dev/null +++ b/detail_png/Shaft_04012_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac14eacf45afd1e2245891e0b017fa966820eabd2b0882c99e943805ed2ff774 +size 30061 diff --git a/detail_png/Shaft_04012_length.png b/detail_png/Shaft_04012_length.png new file mode 100644 index 0000000000000000000000000000000000000000..157a53d8e4a58d2632658ab5164ed4fb081fdf67 --- /dev/null +++ b/detail_png/Shaft_04012_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e72fcce262b23a049d6ab75e9b32fcc1ad380715dddfdf9affe5721891b79b58 +size 30223 diff --git a/detail_png/Shaft_04012_title.png b/detail_png/Shaft_04012_title.png new file mode 100644 index 0000000000000000000000000000000000000000..830d9af7e71065579e2db4570a043f1612ea8e1e --- /dev/null +++ b/detail_png/Shaft_04012_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92989121917fe0da948ae8520a34faa8bf1d16533a61b119aaefc6c8f5537e68 +size 28775 diff --git a/detail_png/Shaft_04020_diam.png b/detail_png/Shaft_04020_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6fdb12807188b858ae8ae266b6ff48add093327b --- /dev/null +++ b/detail_png/Shaft_04020_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:141bca8ca056a5ad7f87b4c8c066da0fbc48578e074a0da69acee53c25f7c734 +size 23441 diff --git a/detail_png/Shaft_04020_length.png b/detail_png/Shaft_04020_length.png new file mode 100644 index 0000000000000000000000000000000000000000..77a7ae1c474f7cc4ce07621c129e11a28a16081b --- /dev/null +++ b/detail_png/Shaft_04020_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f2b7bdbc2c1de602a71bb3d6cc8dbb429f15e5e488c11d7d1465a327a0691b1 +size 21597 diff --git a/detail_png/Shaft_04020_title.png b/detail_png/Shaft_04020_title.png new file mode 100644 index 0000000000000000000000000000000000000000..afa10779b58e13d3699f6d481935264515dc8637 --- /dev/null +++ b/detail_png/Shaft_04020_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bba3a0d96b74042029207c157f864f5773a21390a027de1a9047bff3e4bb274d +size 34489 diff --git a/detail_png/Shaft_04021_diam.png b/detail_png/Shaft_04021_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..44b2fcc88e6ff10b9aaaa11ceab3adf41c285a63 --- /dev/null +++ b/detail_png/Shaft_04021_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20d23ece7048225f622e6ec53acee484ffe428a8d969c485e1d942e9c1b121d1 +size 37778 diff --git a/detail_png/Shaft_04021_length.png b/detail_png/Shaft_04021_length.png new file mode 100644 index 0000000000000000000000000000000000000000..39c176eb0b7e959622e1f6408570ab6b0242bdee --- /dev/null +++ b/detail_png/Shaft_04021_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3804b36335c9d37cd9e28da8cfa7d10cefbad1fe65c7a6437c6338d013ff65f +size 45721 diff --git a/detail_png/Shaft_04021_title.png b/detail_png/Shaft_04021_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7d9b317c14937fccba9cf072699b01ee87b26562 --- /dev/null +++ b/detail_png/Shaft_04021_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fdc7f806a8001847f99ded1c39c17ad296a2ade1e4437843d60eb06bdd9935d +size 28220 diff --git a/detail_png/Shaft_04023_diam.png b/detail_png/Shaft_04023_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e5920dcf8297b2b470687e4d449bfde659f8875d --- /dev/null +++ b/detail_png/Shaft_04023_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63147ba8084281a6ca030063dafea32d174e6d7f78f2a2f15efe9d0588c3ac10 +size 25159 diff --git a/detail_png/Shaft_04023_length.png b/detail_png/Shaft_04023_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6aab19250fbe82d929ebf7d4439b249870296b03 --- /dev/null +++ b/detail_png/Shaft_04023_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86adbce0135197c54852f16eaa36f9126965af49182f25d7961b52e82e53ccd6 +size 34222 diff --git a/detail_png/Shaft_04023_title.png b/detail_png/Shaft_04023_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51442569509807610ec173cf0a0a009c45b4daf6 --- /dev/null +++ b/detail_png/Shaft_04023_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa7ca4724a473b959f0632686ae33191b67f272e0abe2f7399e273208e4a01e5 +size 30132 diff --git a/detail_png/Shaft_04025_diam.png b/detail_png/Shaft_04025_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..db0beae6cfb14689f07aa46e0a77336de9215b8f --- /dev/null +++ b/detail_png/Shaft_04025_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e3eec801f48c64bece586e4714bca4171dedb0405ec4f3f7fe2faae6161f0d7 +size 35408 diff --git a/detail_png/Shaft_04025_length.png b/detail_png/Shaft_04025_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f70b996c65c3c6959e022a10ffe1a6c5ac72dbf --- /dev/null +++ b/detail_png/Shaft_04025_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d547a5df99bccfc7892e7985dad98fca1db0a953465543bfd226274cffc8b8e +size 32759 diff --git a/detail_png/Shaft_04025_title.png b/detail_png/Shaft_04025_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ceb80ba5a3409066ca8b81a50cbedc5f1ae4feac --- /dev/null +++ b/detail_png/Shaft_04025_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b9cf998f4252c7edc59d480fca901fe000004f94e17a71301b83520eb5ec8c5 +size 31828 diff --git a/detail_png/Shaft_04028_diam.png b/detail_png/Shaft_04028_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7340f3a401894e0800f5f3ac106d4d40866fe768 --- /dev/null +++ b/detail_png/Shaft_04028_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:793b534b4821e8fae36353e68532728f4422bbb4b27e99d9c476611394470b41 +size 34172 diff --git a/detail_png/Shaft_04028_length.png b/detail_png/Shaft_04028_length.png new file mode 100644 index 0000000000000000000000000000000000000000..105b1fd85bc06b57a292e9081d3b483565eaf7bd --- /dev/null +++ b/detail_png/Shaft_04028_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c8eb9b166a283c238b9ac97420184f9d44e029bd553c2a2bf058a49a47db3da +size 33155 diff --git a/detail_png/Shaft_04028_title.png b/detail_png/Shaft_04028_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7c77f33eaa74bfcb20d047b91ff1887d3cdbe9b0 --- /dev/null +++ b/detail_png/Shaft_04028_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d8bb2d6c5a638dfa30fa4e66d9a493a805c90f5c678b4e14b4f9b7697a3bcbc +size 29965 diff --git a/detail_png/Shaft_04032_diam.png b/detail_png/Shaft_04032_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c6689619a865c1f40fc76cf9244907d154c22286 --- /dev/null +++ b/detail_png/Shaft_04032_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f47981713e3256e412c2ab38c4d5bdb41835d6ccc34f1633b4a6709b4939cb1f +size 19031 diff --git a/detail_png/Shaft_04032_length.png b/detail_png/Shaft_04032_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2f7b46291df769c585d75525470ee30780093023 --- /dev/null +++ b/detail_png/Shaft_04032_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca01b433a60449022980db68083e61013b8bd903f0bad21e86770a7ad68ae7da +size 15849 diff --git a/detail_png/Shaft_04032_title.png b/detail_png/Shaft_04032_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e6fb511ba38d70311de547282ba0d9aed0dace8d --- /dev/null +++ b/detail_png/Shaft_04032_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:299cdde57da1c9163edf406663cbca88243bfa4c51e68ec137e4dad8d92488b3 +size 13249 diff --git a/detail_png/Shaft_04033_diam.png b/detail_png/Shaft_04033_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2b1926b63e4c3a697102eba8e17da4a7ebdf3ee6 --- /dev/null +++ b/detail_png/Shaft_04033_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:088f1aa005946c19321ac2ae73ac3359aed000c7c6ab742b17d98ed15bc29f97 +size 20323 diff --git a/detail_png/Shaft_04033_length.png b/detail_png/Shaft_04033_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7f568a286e1e6c7554c8f0040f22862bf888f0bf --- /dev/null +++ b/detail_png/Shaft_04033_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9934a9904bf1ab910b73aa9ba6ca3f18fc73c83e15b77ca0e48b96a8317a9fca +size 17054 diff --git a/detail_png/Shaft_04033_title.png b/detail_png/Shaft_04033_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c137281058dc927cf1b4d33e3b17e2bdfd7fa282 --- /dev/null +++ b/detail_png/Shaft_04033_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:912b909a765827395b57ecffe9545de3483e2289d58fd78e93178e31b480ad26 +size 14266 diff --git a/detail_png/Shaft_04038_diam.png b/detail_png/Shaft_04038_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2a47ffc33e7468c4c8337bcfedf101e93be4aba0 --- /dev/null +++ b/detail_png/Shaft_04038_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8004e566f96e18b6619feb0562bc1e7a89a438216a61044d3627918581984fc1 +size 22564 diff --git a/detail_png/Shaft_04038_length.png b/detail_png/Shaft_04038_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a48b88af91083d7183ff032c058319183c96ecee --- /dev/null +++ b/detail_png/Shaft_04038_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:932e7f063b8d45491bc53fca1f315756cd807598f4166592a9fa5604b43eddf8 +size 22398 diff --git a/detail_png/Shaft_04038_title.png b/detail_png/Shaft_04038_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8097654486559b751e1e2c5fcc58b7a3a8611e09 --- /dev/null +++ b/detail_png/Shaft_04038_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0e32e51161cea69d598652dc7bcc5ac4a4488ebc264bc0b6e6293c509b5b7aa +size 32813 diff --git a/detail_png/Shaft_04040_diam.png b/detail_png/Shaft_04040_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4f5324630603b6d4eeeaf1c4f2c1655c24f29e14 --- /dev/null +++ b/detail_png/Shaft_04040_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b26c351bf275b830e2a893a9a3107a2d500abf7149bbbe8ca572d6afc97f00a4 +size 26266 diff --git a/detail_png/Shaft_04040_length.png b/detail_png/Shaft_04040_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8a6b7867abf762f5007c439fb62ce75346b424ef --- /dev/null +++ b/detail_png/Shaft_04040_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29c1f48acc06dc3acdf027e87444d24be0eb9321e287c591fee29a716167c89a +size 20822 diff --git a/detail_png/Shaft_04040_title.png b/detail_png/Shaft_04040_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1b407333a0ef0c5856df02decc8b4b77c684cf86 --- /dev/null +++ b/detail_png/Shaft_04040_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ac1a0c634688b6258a0934fa4a972622511f94e2d67f925e5376235c323a1cc +size 24479 diff --git a/detail_png/Shaft_04044_diam.png b/detail_png/Shaft_04044_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6b0c4382ada629e3795a024df6e9bea5aa2a56e8 --- /dev/null +++ b/detail_png/Shaft_04044_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da1f253776a6cb390e12b9eb764cf5f73e688770a80a83ae0aa4d9ca05ce56b6 +size 20314 diff --git a/detail_png/Shaft_04044_length.png b/detail_png/Shaft_04044_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4376faf70782efb55139205cfd874acd4e8aed18 --- /dev/null +++ b/detail_png/Shaft_04044_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:134b0c421198423e905d031fa6029d4a110925be9fb3f8027767bdf14ad6a971 +size 17384 diff --git a/detail_png/Shaft_04044_title.png b/detail_png/Shaft_04044_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e2ed8ab1ea3992bed9903b1c66a68273f9d864ab --- /dev/null +++ b/detail_png/Shaft_04044_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75ca36907e84f74d380fb9037e8e1ed32142b02ad622aef523018c0f8300ec80 +size 23967 diff --git a/detail_png/Shaft_04052_diam.png b/detail_png/Shaft_04052_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b53a51317b6239314d17135e70ddb70e57f7e000 --- /dev/null +++ b/detail_png/Shaft_04052_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5cabaaa13d865c64cfaf3be70174db8fd54a34c3b5508cc1fb83ac6184bb0d3 +size 24547 diff --git a/detail_png/Shaft_04052_length.png b/detail_png/Shaft_04052_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1dcd9a133c2130cd81f0169e5af0dc49da8bbb06 --- /dev/null +++ b/detail_png/Shaft_04052_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4eb6d6e8b58d5f2048bf180a032419abf48250219b72b62a32982e345f5a9e07 +size 21788 diff --git a/detail_png/Shaft_04052_title.png b/detail_png/Shaft_04052_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0bcd22e0bb945d27bc2032e1f82939c1a9a4c9b3 --- /dev/null +++ b/detail_png/Shaft_04052_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:130ea8ce67386ec9bb7276454d3c1a4f90c6ce50eb4797995ab2302115a83db4 +size 22118 diff --git a/detail_png/Shaft_04062_diam.png b/detail_png/Shaft_04062_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7373144f2a9098a8f7b45f181bd4380fc8588a61 --- /dev/null +++ b/detail_png/Shaft_04062_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f91b0334b242ce16075a69a19b276c64bdb16fa4867394cf01378c89494d0904 +size 24777 diff --git a/detail_png/Shaft_04062_length.png b/detail_png/Shaft_04062_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a1e07372dd9cac0f1ae4f53c307426968488e386 --- /dev/null +++ b/detail_png/Shaft_04062_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01b3d22baf5143383858f44ba9e10462547a4bf50ee5ed061c4d4b02524af6c7 +size 22410 diff --git a/detail_png/Shaft_04062_title.png b/detail_png/Shaft_04062_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7223304190504130dcab14323d965654d8bb6940 --- /dev/null +++ b/detail_png/Shaft_04062_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17312d07e4fbd14690b6964aa85069dc082f18b00ff906cde8d5b53f965aeccb +size 28058 diff --git a/detail_png/Shaft_04063_diam.png b/detail_png/Shaft_04063_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..769d35fcd2860c5845fea72f032163c434916de4 --- /dev/null +++ b/detail_png/Shaft_04063_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b7fa3982905180cb81b575e550e8090753b1501e4fdf75cccce196c2d4b8aea +size 19913 diff --git a/detail_png/Shaft_04063_length.png b/detail_png/Shaft_04063_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ff013df7aba6572820eb1f116e30358c3140a8ef --- /dev/null +++ b/detail_png/Shaft_04063_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:992025ab9d7586f61c1b66919839c57e4f2fac9aec89f510e9707cfff1bb0c9d +size 15763 diff --git a/detail_png/Shaft_04063_title.png b/detail_png/Shaft_04063_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0a135ad6d893e5f6d267113eec8ed4eda3b4b16d --- /dev/null +++ b/detail_png/Shaft_04063_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c066bbaff87ebcbbe4044566ad3f2f4a2057a4a057d3f8736bd99f6eb379bb95 +size 25241 diff --git a/detail_png/Shaft_04069_diam.png b/detail_png/Shaft_04069_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5e0e4cf4a20c83f0c342651b3c38d406ec691bbe --- /dev/null +++ b/detail_png/Shaft_04069_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bc832517930133b16de51b356ead4bb4e73b00e2988b64a9ebf53ee4f1cf773 +size 20402 diff --git a/detail_png/Shaft_04069_length.png b/detail_png/Shaft_04069_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1ce754330d01251682f41aaf187a98dbdeda7c20 --- /dev/null +++ b/detail_png/Shaft_04069_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a66e502e6535ae06a59be2bf4865257482e1223e3fc2040e1e4cc3b85590ba6d +size 17854 diff --git a/detail_png/Shaft_04069_title.png b/detail_png/Shaft_04069_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1f204183ee7fb0b9eac9a161f8dd2ac1dc029751 --- /dev/null +++ b/detail_png/Shaft_04069_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:053a374e2d11e29f0e8dc47668a3ca27bb8da4ae442f82cab21bd2c0490546a3 +size 22874 diff --git a/detail_png/Shaft_04071_diam.png b/detail_png/Shaft_04071_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cf336a44b4cab996dc74adf46bc2f8bf84ad23a5 --- /dev/null +++ b/detail_png/Shaft_04071_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f63300d51cf9b60025780c00d0282b29b4d8d2f16247d1c4b02126b49a27091 +size 25070 diff --git a/detail_png/Shaft_04071_length.png b/detail_png/Shaft_04071_length.png new file mode 100644 index 0000000000000000000000000000000000000000..10852a80df4e3097846057d85cd286f78030e8d1 --- /dev/null +++ b/detail_png/Shaft_04071_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab85e243e2d2f77d8c1fd85646e6c0d7fb83f86d13840bd0ea9c82397df06060 +size 22592 diff --git a/detail_png/Shaft_04071_title.png b/detail_png/Shaft_04071_title.png new file mode 100644 index 0000000000000000000000000000000000000000..89520a88db5e918873fcf98739e2bd6f5880e4d5 --- /dev/null +++ b/detail_png/Shaft_04071_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:732a434c5a6ba8fe56f0bb68cc8db7f65bdfabd02b628a1d1303c4b52db08bc1 +size 27534 diff --git a/detail_png/Shaft_04072_diam.png b/detail_png/Shaft_04072_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d7d5bae719948c85884e9ed6be9ba46f82c90e80 --- /dev/null +++ b/detail_png/Shaft_04072_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fdee39ba9d020ceb433f2594dd33af06637ad6eef937257731f144fa3c793b60 +size 26125 diff --git a/detail_png/Shaft_04072_length.png b/detail_png/Shaft_04072_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b8690e40ff0f35b4de62b4e83e3012d518f0ff31 --- /dev/null +++ b/detail_png/Shaft_04072_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8481f3464afbf45353b4cf8150eb9e6f666e42b89fd9c3ccbeae710b88dac0f7 +size 24116 diff --git a/detail_png/Shaft_04072_title.png b/detail_png/Shaft_04072_title.png new file mode 100644 index 0000000000000000000000000000000000000000..36148321bbff029951207491a5dd4dab6e480bd1 --- /dev/null +++ b/detail_png/Shaft_04072_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3416ae10f59a7b2bd28eef55c99c843278de5375cf6bf73a4415f73ed6d9600 +size 22390 diff --git a/detail_png/Shaft_04073_diam.png b/detail_png/Shaft_04073_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..287af6b48ccaa93b84ebd4db806d6acee4fcc42e --- /dev/null +++ b/detail_png/Shaft_04073_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e569429b288ac38aa59db3e93ae3686afb7618b22d8d3d8b1d6a7c5dd9adbfc +size 26648 diff --git a/detail_png/Shaft_04073_length.png b/detail_png/Shaft_04073_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9b85bc7c1d03381c00d05ff75ff42fcabba625ef --- /dev/null +++ b/detail_png/Shaft_04073_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b65912fef8e8ba5e87adb7ccb6b7be69ef7dcc59f80c6b3c5efb8086338f222 +size 33031 diff --git a/detail_png/Shaft_04073_title.png b/detail_png/Shaft_04073_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6c205f1c69f51ace67959cdd79adcc11f72c3269 --- /dev/null +++ b/detail_png/Shaft_04073_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11657235ba3f3c5eff7bd23dec9fa169e9fe92057d83fcf666800ba50759aa9c +size 31788 diff --git a/detail_png/Shaft_04076_diam.png b/detail_png/Shaft_04076_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9c1e1e85f071dbca14fafa49ea455493911e2800 --- /dev/null +++ b/detail_png/Shaft_04076_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae46e30cb078c9a7a5d281788a3b418c3e14cb9cebfe6691d661c1439183c269 +size 24598 diff --git a/detail_png/Shaft_04076_length.png b/detail_png/Shaft_04076_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5ea2fdb204becf15b6f74a6f563e9be641ad9c58 --- /dev/null +++ b/detail_png/Shaft_04076_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a1a32dce599f2807932e188bba4d155f4bceebd5667cda16ce26b9785ce391c +size 28199 diff --git a/detail_png/Shaft_04076_title.png b/detail_png/Shaft_04076_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6b56bc5841e44b297f6404379de7589f4bd1a870 --- /dev/null +++ b/detail_png/Shaft_04076_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cec385a768bcb5391c62202d19133cfa57c352a215a1f10a515e0c773a2bccd9 +size 31837 diff --git a/detail_png/Shaft_04077_diam.png b/detail_png/Shaft_04077_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1f9fd97d2c8fea7e6fa2f59107d27faecd817b63 --- /dev/null +++ b/detail_png/Shaft_04077_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6905e317c3a93395b242ffba81b12fbe2f9ea1d4014540214ae67e8305f4b6b6 +size 34567 diff --git a/detail_png/Shaft_04077_length.png b/detail_png/Shaft_04077_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6e36f5d96eb4b722afdec5b450630ed0a1a60dc9 --- /dev/null +++ b/detail_png/Shaft_04077_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:480a2b880eccc308da8e9351fcdb5176dbfe823dfdbe2cb6a43abdddf40fa50f +size 33148 diff --git a/detail_png/Shaft_04077_title.png b/detail_png/Shaft_04077_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4037f53564cebb49841e0ed7fa819bda7a4020ca --- /dev/null +++ b/detail_png/Shaft_04077_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8f56ff893e02ab4e0f574c647c83978f68ad87be5aca61a7d761feb971b015b +size 30910 diff --git a/detail_png/Shaft_04078_diam.png b/detail_png/Shaft_04078_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9528b7949f2fd8c668be1b7a58b071f5b0adf489 --- /dev/null +++ b/detail_png/Shaft_04078_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30f158a17ed655cdf0d6b757446e01611e6ae2e6425749eeecdea4b92181538b +size 25262 diff --git a/detail_png/Shaft_04078_length.png b/detail_png/Shaft_04078_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c175528bcb120b0422dcd1e79416f1c6568eb74b --- /dev/null +++ b/detail_png/Shaft_04078_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:081a8e0f2f565b4680033d1826d62e27b1e65b80526ba496e991d091b088af46 +size 20572 diff --git a/detail_png/Shaft_04078_title.png b/detail_png/Shaft_04078_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6eab8beecd112e4732041dbf63bc339e68e3f8ef --- /dev/null +++ b/detail_png/Shaft_04078_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8aaa671ea9673ef0863d7890c5f2c5d527bc6d394bbb1742fe9fd42804a6b00d +size 22509 diff --git a/detail_png/Shaft_04079_diam.png b/detail_png/Shaft_04079_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3e8035279f256f682b400cc0a60790cb9be03941 --- /dev/null +++ b/detail_png/Shaft_04079_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d2f9ba267c77b4953c7c84c908e87985174fe6a4e80870cc3816079add95c92 +size 31243 diff --git a/detail_png/Shaft_04079_length.png b/detail_png/Shaft_04079_length.png new file mode 100644 index 0000000000000000000000000000000000000000..af50bfb8b2d1830f20c15878763c86db8b20ae44 --- /dev/null +++ b/detail_png/Shaft_04079_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69617ac06dc5c2823a2804dc1030d4e33fb209d1dfcf558dcf0451b84a4276a8 +size 28700 diff --git a/detail_png/Shaft_04079_title.png b/detail_png/Shaft_04079_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8f1ce577dcff79915266eacd8614b04ca937a61c --- /dev/null +++ b/detail_png/Shaft_04079_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c17075b76ffe848f3dfe66c6920902664942580017f3849b6b347a3614fc74f +size 30981 diff --git a/detail_png/Shaft_04090_diam.png b/detail_png/Shaft_04090_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e02cf67558ada85c68e8d28bf320bb1908a9c27d --- /dev/null +++ b/detail_png/Shaft_04090_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f683788c5a7894510986ab4a317856957998268041f3f2ea7c953959bb1c6398 +size 20364 diff --git a/detail_png/Shaft_04090_length.png b/detail_png/Shaft_04090_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c56e94a6d190239bb721275c370dabe6aca302d0 --- /dev/null +++ b/detail_png/Shaft_04090_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97685ee328722c50fea74194bb1f2af82e6ecafc434f8a30dbfbbdaa3f57bbc0 +size 19243 diff --git a/detail_png/Shaft_04090_title.png b/detail_png/Shaft_04090_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2044e419ba27db837013ae90cdd13402dbae267 --- /dev/null +++ b/detail_png/Shaft_04090_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbc75328e873c571895aed2f50a05f30827aa5d7fc1a12ff8f96bd37f2510aae +size 26994 diff --git a/detail_png/Shaft_04093_diam.png b/detail_png/Shaft_04093_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..aa724c8cd132344a2125adc27ba24e8fc920a6f4 --- /dev/null +++ b/detail_png/Shaft_04093_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc2ef6f5a99127c36ddd2beea92424c02b2014d92a596f4733c4d61f9f276db8 +size 24815 diff --git a/detail_png/Shaft_04093_length.png b/detail_png/Shaft_04093_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e51dd4a11187d5335d1cb5470325b9d11ae6f321 --- /dev/null +++ b/detail_png/Shaft_04093_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a1b70dae51bf4d38d2137819146e38cb3ab952fc5ffadcdd78c2966a404cd9c +size 19654 diff --git a/detail_png/Shaft_04093_title.png b/detail_png/Shaft_04093_title.png new file mode 100644 index 0000000000000000000000000000000000000000..44aed0f530d946b2d97c4a79d597d0310f1cdce9 --- /dev/null +++ b/detail_png/Shaft_04093_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e838c8b599397adab591119173ca0d55782aa04434586ec706ae3821023a9e4c +size 18826 diff --git a/detail_png/Shaft_04094_diam.png b/detail_png/Shaft_04094_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cab4b048db28d39e033531f8e08a574c46226557 --- /dev/null +++ b/detail_png/Shaft_04094_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dd14692a48127b9059fa0da2dfdae927e6ae52f4117cca9d942a70f2be394f2 +size 32573 diff --git a/detail_png/Shaft_04094_length.png b/detail_png/Shaft_04094_length.png new file mode 100644 index 0000000000000000000000000000000000000000..40a6ae57ec10086a12d2f0bef40e486e8281bbfd --- /dev/null +++ b/detail_png/Shaft_04094_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8538c783f18235b5eb40e718a4a54368618310641af6ed1c311c79673194d8ef +size 43933 diff --git a/detail_png/Shaft_04094_title.png b/detail_png/Shaft_04094_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6048e433ee889be78a1c3f62cbb48669eaa00a01 --- /dev/null +++ b/detail_png/Shaft_04094_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7d947e2f210529613b3fbae06f580a5c4dd1e5f4c614e9da76e903f70c41fde +size 32209 diff --git a/detail_png/Shaft_04097_diam.png b/detail_png/Shaft_04097_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1bb74499e3b3c31c5b16549dd8e730ccf1ded71d --- /dev/null +++ b/detail_png/Shaft_04097_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7eee9974c616bf0d4808fea7a2ff4b7e3a9c40dc510cd5c0bcaef88e9a7b16b +size 38088 diff --git a/detail_png/Shaft_04097_length.png b/detail_png/Shaft_04097_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4ad1b7f47fd7788245940edf83dc5fb3b6fdf323 --- /dev/null +++ b/detail_png/Shaft_04097_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37718f0afb438b9323dc5c4c14c6c2288b00c3f9590769fa2cf36a52d93be167 +size 45280 diff --git a/detail_png/Shaft_04097_title.png b/detail_png/Shaft_04097_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cf0cfd93c9ff241e921b8ea3b86db0ff2f4b4ebb --- /dev/null +++ b/detail_png/Shaft_04097_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a8fab56294dba3174974b31e184e8ba08ad2a26918ea5c16c1b6d27527c860f +size 32118 diff --git a/detail_png/Shaft_04098_diam.png b/detail_png/Shaft_04098_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cee5e32f12a21fbb19786750f084404cbbc236bb --- /dev/null +++ b/detail_png/Shaft_04098_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46edb69690db1426eea71909fe0f722c6490232722155cf9b72c53fb0a9f2e4e +size 20108 diff --git a/detail_png/Shaft_04098_length.png b/detail_png/Shaft_04098_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8a8b5e04ab7831427e14180ab939f21c2897c748 --- /dev/null +++ b/detail_png/Shaft_04098_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51764e01be2c1a0110fcb3f2e3fb29afa1134c9df811d32abf31d062a88c1eea +size 16292 diff --git a/detail_png/Shaft_04098_title.png b/detail_png/Shaft_04098_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6e40a93db71e12a6458bdf24932dc6579ffdf825 --- /dev/null +++ b/detail_png/Shaft_04098_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9b87573af5da5e842194234c1e542d30c27fe4932d545ad969e40967fe1020c +size 14984 diff --git a/detail_png/Shaft_04099_diam.png b/detail_png/Shaft_04099_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48986191e6ad8cdfd033193b8bdd787a50a0068b --- /dev/null +++ b/detail_png/Shaft_04099_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0cce81bb253e170ea2dda1444830b93d4ca4fbf3033298cf1c5b4ce100b930e +size 26100 diff --git a/detail_png/Shaft_04099_length.png b/detail_png/Shaft_04099_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a0f5acd28cc1c3d5949a8a17bd27ee5931202f41 --- /dev/null +++ b/detail_png/Shaft_04099_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c8757c868fb38e0baa2c7742ecd5ea26a8f896d26861fc9ac65a7a3de7cfb37 +size 27870 diff --git a/detail_png/Shaft_04099_title.png b/detail_png/Shaft_04099_title.png new file mode 100644 index 0000000000000000000000000000000000000000..070233ca9289f43369623b939e52e60dbdd056dd --- /dev/null +++ b/detail_png/Shaft_04099_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05751c1614d5ca8fb55772b8a89daa53210616d242e7d79e13f6fcf5e2a0dc63 +size 32555 diff --git a/detail_png/Shaft_04100_diam.png b/detail_png/Shaft_04100_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5dd366a2bfc3d63aa2dd00854f8638aae3aac9bf --- /dev/null +++ b/detail_png/Shaft_04100_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:512679a55cc1e33cf58db2a37bda373c8496fc4211f35598da190697956fcafb +size 20344 diff --git a/detail_png/Shaft_04100_length.png b/detail_png/Shaft_04100_length.png new file mode 100644 index 0000000000000000000000000000000000000000..60cf909b8f563b88665f1ace33ceed265d60ec25 --- /dev/null +++ b/detail_png/Shaft_04100_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be47b6d4ae9930067e4fe38daf12877a28b44c28e030c45e7d034638b3f4357b +size 15740 diff --git a/detail_png/Shaft_04100_title.png b/detail_png/Shaft_04100_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fbb61430999e04c3f1f96d833cd7a5864fbf5844 --- /dev/null +++ b/detail_png/Shaft_04100_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ef131506ccdb4c5f823b04b4d6ba0dad3eb1aec20842f0d4078cf70e398c7e6 +size 16390 diff --git a/detail_png/Shaft_04101_diam.png b/detail_png/Shaft_04101_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e6c24f88b9f57d6e786a7f0ba3f7db34413cf3d5 --- /dev/null +++ b/detail_png/Shaft_04101_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98a45cc8f2fe8fca9bc47f4d79b345fdc268d99efffd2dec61bf984e68c7eef8 +size 23972 diff --git a/detail_png/Shaft_04101_length.png b/detail_png/Shaft_04101_length.png new file mode 100644 index 0000000000000000000000000000000000000000..482707e21be5c139d134f1643907fe3fdb427832 --- /dev/null +++ b/detail_png/Shaft_04101_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5d947fb959b982654e0f3026a9131afd5ea1f2cccdc0c8d9010828899b5e21e +size 18037 diff --git a/detail_png/Shaft_04101_title.png b/detail_png/Shaft_04101_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c683994838e179d6c2b044287228a1ef7174b494 --- /dev/null +++ b/detail_png/Shaft_04101_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8fb0b687b273babc1c771a24213fb2e9a7d86638d4236944e83d74051055260 +size 18755 diff --git a/detail_png/Shaft_04102_diam.png b/detail_png/Shaft_04102_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8a60d94144fd9364cf2865f7bbbff6e242d4ae18 --- /dev/null +++ b/detail_png/Shaft_04102_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77376744e547b38b0d5004201c6e8425e6bf36c9bcb6059c98285217fc9b06a2 +size 31114 diff --git a/detail_png/Shaft_04102_length.png b/detail_png/Shaft_04102_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f71c6746d678bf58e7500aebf1327cb7ad1f5eca --- /dev/null +++ b/detail_png/Shaft_04102_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e480d8e156e95e2c39c2a202182929f661ca8a17044cbed2c73772d2a7332b66 +size 35074 diff --git a/detail_png/Shaft_04102_title.png b/detail_png/Shaft_04102_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dcdb9963934f830826a970616cb0e7130996c163 --- /dev/null +++ b/detail_png/Shaft_04102_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cf824047be90f65b61311a44a6d8b48ddba813c9cf6952198197dfd83ff8f29 +size 31412 diff --git a/detail_png/Shaft_04110_diam.png b/detail_png/Shaft_04110_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..362ed5a2b7cc9f0305f7253aea9703de88cb64ee --- /dev/null +++ b/detail_png/Shaft_04110_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:906616ec59f448570dd4047357366c5104b1855c7330b53f9351bfb3b567f31a +size 25925 diff --git a/detail_png/Shaft_04110_length.png b/detail_png/Shaft_04110_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a6065d5203c5dd6cb979dc92f3e2992180dcc7bc --- /dev/null +++ b/detail_png/Shaft_04110_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70edc07457283bcb9f85a7cc4d7b63b710f1f2a6a69c168e8577e5918beec708 +size 25338 diff --git a/detail_png/Shaft_04110_title.png b/detail_png/Shaft_04110_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c43b2dd5b697daea7a27278cafda5936b7ce0294 --- /dev/null +++ b/detail_png/Shaft_04110_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04b7786d68d7ab259aaa6ac27312a981fadc95d26e9c955658e9f5f7ea4e526b +size 26028 diff --git a/detail_png/Shaft_04111_diam.png b/detail_png/Shaft_04111_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..443ba65ff5d7a1ef2f01e8d02e012dd214d5655b --- /dev/null +++ b/detail_png/Shaft_04111_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:499c90b21e117f07b67db8b8441f644a6945febb1ce76f187b199f2a92d73680 +size 25404 diff --git a/detail_png/Shaft_04111_length.png b/detail_png/Shaft_04111_length.png new file mode 100644 index 0000000000000000000000000000000000000000..33b808d2ca4ec2251954e1ede4b35656910adc64 --- /dev/null +++ b/detail_png/Shaft_04111_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac7a87e93e36958f2b980cfae0da27e957c550a510bdfdf6dac1bea07f7b0505 +size 21251 diff --git a/detail_png/Shaft_04111_title.png b/detail_png/Shaft_04111_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2376172515593b9587472eee77d492bccc4728cf --- /dev/null +++ b/detail_png/Shaft_04111_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce3b514042ea303ae8e772e2e6b4e6d1416c15dcb32490b544737cf8ce9d3423 +size 23122 diff --git a/detail_png/Shaft_04112_diam.png b/detail_png/Shaft_04112_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a673d36a95a97fb87f1a4514000a89002a45ad2a --- /dev/null +++ b/detail_png/Shaft_04112_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6b4caaa070c3bb23ff264ba0b844a0dd776ba6e37459ceeee2b3f1a7ae7c8ec +size 29405 diff --git a/detail_png/Shaft_04112_length.png b/detail_png/Shaft_04112_length.png new file mode 100644 index 0000000000000000000000000000000000000000..171a648575c0f2d40362f5ab2db5c21c8073868f --- /dev/null +++ b/detail_png/Shaft_04112_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42737c7e10bb3581e59ddd8d8781204bb89aa6b579acdf63a997fa7b44c1849b +size 32387 diff --git a/detail_png/Shaft_04112_title.png b/detail_png/Shaft_04112_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2e6f610f87976cc30303e2bac114e10ab23f1928 --- /dev/null +++ b/detail_png/Shaft_04112_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc33338470a472fe86bde134e60f9bcb0230716829c440b482200c193e363acb +size 27801 diff --git a/detail_png/Shaft_04117_diam.png b/detail_png/Shaft_04117_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d9395fe9cc18dc7c71ad3597709789467c069f08 --- /dev/null +++ b/detail_png/Shaft_04117_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fef563cbb1f6bf7df4bf548963d9f0625fb6522d9ac647990d1d30f482a9201 +size 23538 diff --git a/detail_png/Shaft_04117_length.png b/detail_png/Shaft_04117_length.png new file mode 100644 index 0000000000000000000000000000000000000000..efa14fab51b44ab8e45aed958eb87190c985d25a --- /dev/null +++ b/detail_png/Shaft_04117_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b41a6e28d6e59282ddfbd7016a1d8a4a474d0cd5856ea5a8ead9f26016956ae +size 19673 diff --git a/detail_png/Shaft_04117_title.png b/detail_png/Shaft_04117_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1f2e785826f0907a9995b2ba6151c41831a2b5f5 --- /dev/null +++ b/detail_png/Shaft_04117_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be02d3143ca8b12ca00d1f11ed67b4c94e7b7687e842e1707202b891eb27a267 +size 19965 diff --git a/detail_png/Shaft_04119_diam.png b/detail_png/Shaft_04119_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bd3295699bef830b2d2d0be66f63468389b4fb81 --- /dev/null +++ b/detail_png/Shaft_04119_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:455774228d2be6d2bbd13f2227b5bf0575219c816c7b970f4c747cecb791a8bd +size 19552 diff --git a/detail_png/Shaft_04119_length.png b/detail_png/Shaft_04119_length.png new file mode 100644 index 0000000000000000000000000000000000000000..25c3c2435ee7507624880c5d7c303c0024c87fa5 --- /dev/null +++ b/detail_png/Shaft_04119_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23339405b7642545d45c5f5c64f3d809f02cb264243b798887b8b55728fbc8d4 +size 22818 diff --git a/detail_png/Shaft_04119_title.png b/detail_png/Shaft_04119_title.png new file mode 100644 index 0000000000000000000000000000000000000000..00a21a203ad2aaf188eea2079e0fa70cd54a1457 --- /dev/null +++ b/detail_png/Shaft_04119_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:934d887ab00f953a6644fec65ec25427df587c940beb4bc65a636134a1866207 +size 28465 diff --git a/detail_png/Shaft_04122_diam.png b/detail_png/Shaft_04122_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..65f17809ba5aafc146e31cc7e06f76fe4b6299e7 --- /dev/null +++ b/detail_png/Shaft_04122_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec60e0a255870f9ce2ae47f77653e36648301bda71a9f761ab8cf6ae0b253d90 +size 18889 diff --git a/detail_png/Shaft_04122_length.png b/detail_png/Shaft_04122_length.png new file mode 100644 index 0000000000000000000000000000000000000000..acbe1f3eedd888fdf30107b0cf1465b5a1c543fc --- /dev/null +++ b/detail_png/Shaft_04122_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c49dd623f6909c6c7f754041d744d34ce3766ee2306007a6dae94d671780cc8 +size 15941 diff --git a/detail_png/Shaft_04122_title.png b/detail_png/Shaft_04122_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4d3a74a100aecc80ea25eafee0dd5bf6cc907731 --- /dev/null +++ b/detail_png/Shaft_04122_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c6ca49b1a80041707839e2da72b40c9da0d6e3a1ad36e023bb3283d592b36cc +size 14879 diff --git a/detail_png/Shaft_04124_diam.png b/detail_png/Shaft_04124_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9a54837aa2ae71bcbddc544b333377001a0899c7 --- /dev/null +++ b/detail_png/Shaft_04124_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fc038b2adc64072c49b26d250f404d2f768293d0b43fba08d01dfee0cdce47b +size 18816 diff --git a/detail_png/Shaft_04124_length.png b/detail_png/Shaft_04124_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1160f43bb5ec2c7b5e52a118586bd666c683b92d --- /dev/null +++ b/detail_png/Shaft_04124_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9817ca86c1f2c138946cb34b83b77424676000713a42f0ac06138bb225f5ff54 +size 14651 diff --git a/detail_png/Shaft_04124_title.png b/detail_png/Shaft_04124_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dca343e0c23363ea98c44882bcbe0fdaf777c907 --- /dev/null +++ b/detail_png/Shaft_04124_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:342d16ca64bfdce298f2947d7de72b5a06e46309304f428ba89ff75d851ffc8a +size 25538 diff --git a/detail_png/Shaft_04125_diam.png b/detail_png/Shaft_04125_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4adca7e182b0abe0b3ab38c2de405b3bbb3fbbff --- /dev/null +++ b/detail_png/Shaft_04125_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59c18bf91f928f6291627fd226b2c45cdcba45bbff53f7107b2078d5b1561b44 +size 30977 diff --git a/detail_png/Shaft_04125_length.png b/detail_png/Shaft_04125_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f766e08f23af07758d16ee759bfbf4e46390f214 --- /dev/null +++ b/detail_png/Shaft_04125_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:772a8f4195d2fa238bd49ace58e4d827efb6fcb1f8fd86c5821ab54ae234d7f6 +size 38545 diff --git a/detail_png/Shaft_04125_title.png b/detail_png/Shaft_04125_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9d6908c068a15880350b8fe7c76b0cb74809961a --- /dev/null +++ b/detail_png/Shaft_04125_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9629e33d638eed7a55ac13176a2ee4cfd798d938e463a00bc3491385c099485 +size 28282 diff --git a/detail_png/Shaft_04126_diam.png b/detail_png/Shaft_04126_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6452513a1586ee7beb050c377172ddbf097adcb0 --- /dev/null +++ b/detail_png/Shaft_04126_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:073da70ca071e8e7871b4ea21054f0ce8e49b0a92c405aeaf14bf17c0ff9d9b8 +size 19387 diff --git a/detail_png/Shaft_04126_length.png b/detail_png/Shaft_04126_length.png new file mode 100644 index 0000000000000000000000000000000000000000..449a68dc434f1e256a6e60ebba513fa848e02f22 --- /dev/null +++ b/detail_png/Shaft_04126_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df8f65449ee5172ad6df52522dd289418834a51bdff1070c3f509e111004cbac +size 16760 diff --git a/detail_png/Shaft_04126_title.png b/detail_png/Shaft_04126_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5065987b0922706b66c963d8eec89c7bdea9aceb --- /dev/null +++ b/detail_png/Shaft_04126_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d9e2fcf43e1b276a03b04789304f043621494a1080f0d918a469805776555d1 +size 19362 diff --git a/detail_png/Shaft_04142_diam.png b/detail_png/Shaft_04142_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d38dc5d787212702aefb5459419a70a87b0489c8 --- /dev/null +++ b/detail_png/Shaft_04142_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e4ab5f878f9a5ee35bd5f070f89df011177274b67ef322c67410c4344a4aec5 +size 24518 diff --git a/detail_png/Shaft_04142_length.png b/detail_png/Shaft_04142_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ace9cc5a53128ef77a9a0ad32f9a342c284cd31f --- /dev/null +++ b/detail_png/Shaft_04142_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d60ebdf2545e415fd341ef97755ec9c9a710bc8ac6db460431d081db0094b2d +size 18627 diff --git a/detail_png/Shaft_04142_title.png b/detail_png/Shaft_04142_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5d061db0749c372f87e54f2962978a08bcc72cbd --- /dev/null +++ b/detail_png/Shaft_04142_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d04adee1183dc62ea4e167262f82e28213e00ca64c3fd92fdf3544f1b4b6c57 +size 16173 diff --git a/detail_png/Shaft_04143_diam.png b/detail_png/Shaft_04143_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dac635f07146f4e6989599e28e6df71e09144fb8 --- /dev/null +++ b/detail_png/Shaft_04143_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5d0ca10f4ac865dc147ca17a63244fe8ccfc304db155d2ef870213db29d52d1 +size 32255 diff --git a/detail_png/Shaft_04143_length.png b/detail_png/Shaft_04143_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c236b330b0d9ae6192bfa40ffad5faad6652c065 --- /dev/null +++ b/detail_png/Shaft_04143_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bef094a0daca1562cd9338508ae8a3574dace3318cffc55866487ffaca45f5c1 +size 45379 diff --git a/detail_png/Shaft_04143_title.png b/detail_png/Shaft_04143_title.png new file mode 100644 index 0000000000000000000000000000000000000000..de877fe64ef82867d5ffc8e263189c4fbf550126 --- /dev/null +++ b/detail_png/Shaft_04143_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57a7f80a6149356e0aa346e9067aaa759edbfe97262b3b34ffd13a64e9b7da0e +size 31783 diff --git a/detail_png/Shaft_04144_diam.png b/detail_png/Shaft_04144_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..166bab8b85848967cb8724e72d5245ae5234f330 --- /dev/null +++ b/detail_png/Shaft_04144_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6037b83d83ae2be51fd3f4989cb0a6eee17d31d486e61e28e7e3af2cabb78f0b +size 18883 diff --git a/detail_png/Shaft_04144_length.png b/detail_png/Shaft_04144_length.png new file mode 100644 index 0000000000000000000000000000000000000000..29af21f8a58535f1c343d47fd16ca625428646d1 --- /dev/null +++ b/detail_png/Shaft_04144_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3481f466ef9a236ba72b7748a7f73b1bd4906e43a4f595b0568389c59c4ea1fe +size 22050 diff --git a/detail_png/Shaft_04144_title.png b/detail_png/Shaft_04144_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29270114c902e80305a11b15b36cd2ad4168653e --- /dev/null +++ b/detail_png/Shaft_04144_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0add83cb52296172589a6ae4dd2614d9bca6dc3935d3cd80c4b43169f8ae19d +size 27692 diff --git a/detail_png/Shaft_04148_diam.png b/detail_png/Shaft_04148_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5df9cd9f8032a2fcdd8f35c96f88fe52370c62f6 --- /dev/null +++ b/detail_png/Shaft_04148_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74d4141e65a3254734c37386230cbaa6eb50a88bf2cc76d22367941d7b250e71 +size 31632 diff --git a/detail_png/Shaft_04148_length.png b/detail_png/Shaft_04148_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7bf9c706094e210f905f4892d2e75eb946aa534e --- /dev/null +++ b/detail_png/Shaft_04148_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9f3a1ff2af6c094b979d5c1279edb61a451e2af0457bae28d8e32f1010604ce +size 43735 diff --git a/detail_png/Shaft_04148_title.png b/detail_png/Shaft_04148_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0a35543d7cc40e215107d6997ab99620be5a639d --- /dev/null +++ b/detail_png/Shaft_04148_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14f7af57970aea7ed808e0e405a2b02f3ec37d80cedbe0ed39648ad498f95f08 +size 29843 diff --git a/detail_png/Shaft_04152_diam.png b/detail_png/Shaft_04152_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2f1d73c6022d3a3e41e631ed959dfe6ef97c42ca --- /dev/null +++ b/detail_png/Shaft_04152_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc7d3f809db629366ee439e4868611da97c3a45728fce5181a447b977f6f5aca +size 35166 diff --git a/detail_png/Shaft_04152_length.png b/detail_png/Shaft_04152_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac5c22ce2e526c9e94738374c5324bd0f9528520 --- /dev/null +++ b/detail_png/Shaft_04152_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2eb1802763100d014a67aeabb5580ada1e141b13bb77f4125329a9ba910ee9a +size 42838 diff --git a/detail_png/Shaft_04152_title.png b/detail_png/Shaft_04152_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b5c9a02b0ffd954cc91f9393c53e60d65df59413 --- /dev/null +++ b/detail_png/Shaft_04152_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a44d4f303bdf3a84e2fe7df7480b0638788c16a60a87b3b542cd5873464152c6 +size 28414 diff --git a/detail_png/Shaft_04154_diam.png b/detail_png/Shaft_04154_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..25f2caf0a42f1f0bd521e67bf898d373c99ee9ab --- /dev/null +++ b/detail_png/Shaft_04154_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25651cd56721db887deed86d5e8e954f6df179798ec526a0cd89006138496851 +size 34901 diff --git a/detail_png/Shaft_04154_length.png b/detail_png/Shaft_04154_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5fc63e66b3dbc2b03c89f0005d401d2c6b1eb72b --- /dev/null +++ b/detail_png/Shaft_04154_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ab662b330e49ae789ab44199a248287a80b7fa7d5200ac04f1980ad91548110 +size 34027 diff --git a/detail_png/Shaft_04154_title.png b/detail_png/Shaft_04154_title.png new file mode 100644 index 0000000000000000000000000000000000000000..62a454fc0fb0cfabd7a0ad29aea8ea23ce0199e2 --- /dev/null +++ b/detail_png/Shaft_04154_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a461192b53a5253a2f173bc4dd5ae9d56b6f168abeecafaba5d3c7c46d10a9b +size 30181 diff --git a/detail_png/Shaft_04155_diam.png b/detail_png/Shaft_04155_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a79bb486c7afe9c5e0b66b3b905bdd16df9ca5b0 --- /dev/null +++ b/detail_png/Shaft_04155_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d33dd4eccbc0659b5f36f03806e7d87ab9e54d295227e25f23fbe77d70c73e0 +size 20396 diff --git a/detail_png/Shaft_04155_length.png b/detail_png/Shaft_04155_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cb6c5ae239fa346a8ce51d044d33eb82b7dfbabf --- /dev/null +++ b/detail_png/Shaft_04155_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7acf43b2a61eee6fc8aa76efa14ebd81d1ba7c84732f16b60f430219497509da +size 22011 diff --git a/detail_png/Shaft_04155_title.png b/detail_png/Shaft_04155_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4ed30afbd0d039ffabaa94f8ade8fa25335cac26 --- /dev/null +++ b/detail_png/Shaft_04155_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccfb3735acd376bb36d449a278f6f6132660635d77987d886839533b3e43843b +size 29123 diff --git a/detail_png/Shaft_04158_diam.png b/detail_png/Shaft_04158_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c28b8056552ed4df1080ef3d22a963bce15d195d --- /dev/null +++ b/detail_png/Shaft_04158_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16cb9e85b9d424ce6ce7cdd2e5d7a667ecd5be309c49c7ee665145b655aaac95 +size 19221 diff --git a/detail_png/Shaft_04158_length.png b/detail_png/Shaft_04158_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0dfa9fdc0594407128374e73f447316c0ee1aa70 --- /dev/null +++ b/detail_png/Shaft_04158_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1b4fd379041a55a74ec2c73b2161a4bc4fa8724b5d9ebcb02cf295e161d6fcb +size 16283 diff --git a/detail_png/Shaft_04158_title.png b/detail_png/Shaft_04158_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9e9aca116ce6eb30c518ec1e9ab8bd4c12090194 --- /dev/null +++ b/detail_png/Shaft_04158_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11192a4c1ad7f2b63bd076337209a3d72f7e795e536049ce86f6c195874936b5 +size 18817 diff --git a/detail_png/Shaft_04163_diam.png b/detail_png/Shaft_04163_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0a1f1c9c30dacc728fdfd06844d9e73b68ad202e --- /dev/null +++ b/detail_png/Shaft_04163_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:511ca4e43dde214f15ae1c5c4a4949af6074bdb738c9a84c2cf194b1478d076c +size 19636 diff --git a/detail_png/Shaft_04163_length.png b/detail_png/Shaft_04163_length.png new file mode 100644 index 0000000000000000000000000000000000000000..27337ed04c1e26791deebb604d7c9602cd1edd8c --- /dev/null +++ b/detail_png/Shaft_04163_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0cffd7ce7bf3dee287618dedd081b9f3f6d4e90b60ef6c11eac0250977e910f +size 15870 diff --git a/detail_png/Shaft_04163_title.png b/detail_png/Shaft_04163_title.png new file mode 100644 index 0000000000000000000000000000000000000000..044d3eb0b62e0db44b280338c4d58433f88c0da2 --- /dev/null +++ b/detail_png/Shaft_04163_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea92c75c300ff89f2960e4cbf7126758cc30d842c004755a47e04c4b8faf4bd8 +size 15608 diff --git a/detail_png/Shaft_04168_diam.png b/detail_png/Shaft_04168_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..264b9f45271ec7c94c5e5dde2634ad11e4585ecb --- /dev/null +++ b/detail_png/Shaft_04168_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71ad5d3ccb7aac91efeb7a4c84d527b10794fe6f875ce75914d39b48eaac278e +size 28540 diff --git a/detail_png/Shaft_04168_length.png b/detail_png/Shaft_04168_length.png new file mode 100644 index 0000000000000000000000000000000000000000..345fc0dda7226c7be38a073aa082d769019e1f1b --- /dev/null +++ b/detail_png/Shaft_04168_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1f3a71fead6eb38587b082fefda42d85d785182f1db96dd82bfd48908a9fb07 +size 25261 diff --git a/detail_png/Shaft_04168_title.png b/detail_png/Shaft_04168_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bba8bfc7ca4ee11695c4ba95e7d4d87882a1de3f --- /dev/null +++ b/detail_png/Shaft_04168_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42723fd8435ca4cdbeca2349520414176505bf36db10b290b5823a685209ed43 +size 20150 diff --git a/detail_png/Shaft_04171_diam.png b/detail_png/Shaft_04171_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a945b66bde2097fe3077a0684c26ca07f6388b89 --- /dev/null +++ b/detail_png/Shaft_04171_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07eaf8af15152d37fae5a6db5a1041835a841375176fd016428e425cc318a9b9 +size 25235 diff --git a/detail_png/Shaft_04171_length.png b/detail_png/Shaft_04171_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e2ead75ce01cb6d1c12c02dc0653367565150335 --- /dev/null +++ b/detail_png/Shaft_04171_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12599f44fb5bb985e47639d9fa4452e5016258075b1e466ce109fdd49124d398 +size 26086 diff --git a/detail_png/Shaft_04171_title.png b/detail_png/Shaft_04171_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1cc211d480cf9b14147f9a9aec314a67be8ea373 --- /dev/null +++ b/detail_png/Shaft_04171_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3309632a8e766904bc9582a4b40c01cbcae835b55f0a6b5e55111f9e6191297 +size 29614 diff --git a/detail_png/Shaft_04172_diam.png b/detail_png/Shaft_04172_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..426c3fc98aa4bb56f2a9ffc0d27f462ebcde97dd --- /dev/null +++ b/detail_png/Shaft_04172_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5087ae23a4917d72d30211c46cf406ffd63e489f6e6c9ae403840879bd91d09 +size 34324 diff --git a/detail_png/Shaft_04172_length.png b/detail_png/Shaft_04172_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8ad989e02c4eacfde8e04d070fa4f5652a8d9e17 --- /dev/null +++ b/detail_png/Shaft_04172_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5df89415f8f0c890fa1ca44cd8c0cc538b129feca2a0f9ed29b1989e4169c661 +size 32252 diff --git a/detail_png/Shaft_04172_title.png b/detail_png/Shaft_04172_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f3b7ec1d669d9760245821787f4d9b1ccebb1388 --- /dev/null +++ b/detail_png/Shaft_04172_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b3fc43ee3771f8e36cbb32ea54b05227faf992e9a72bff4a5dffbb57bc9cb5e +size 27384 diff --git a/detail_png/Shaft_04173_diam.png b/detail_png/Shaft_04173_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ec2d1874350610ff06d6c2f8275bd82fd478cf17 --- /dev/null +++ b/detail_png/Shaft_04173_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a73907e0d72e28a40648c9cffeacb494b9bf1901d10cab43a785f025f5ab8e66 +size 19386 diff --git a/detail_png/Shaft_04173_length.png b/detail_png/Shaft_04173_length.png new file mode 100644 index 0000000000000000000000000000000000000000..372ea1a49a380498b18cb701996641b0bf796c53 --- /dev/null +++ b/detail_png/Shaft_04173_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de5fadadf3ab3de9be0d09223efcc526afee923a20860eb7d6b87f6cb8578252 +size 16726 diff --git a/detail_png/Shaft_04173_title.png b/detail_png/Shaft_04173_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5910cc7ad09b2ec565bf1fc8472eab120bb10879 --- /dev/null +++ b/detail_png/Shaft_04173_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b2a8c38840104417329d919586fc7766bb756af5fcd8d0ae27fdac5efc6452a +size 16337 diff --git a/detail_png/Shaft_04175_diam.png b/detail_png/Shaft_04175_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d417b93718f02208de3e8b47f9ec55d05deb85f9 --- /dev/null +++ b/detail_png/Shaft_04175_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5ca6cf54018a81c0da56583238755f8a242c8fcf3988225d3b3220a53ec8753 +size 31167 diff --git a/detail_png/Shaft_04175_length.png b/detail_png/Shaft_04175_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b83739117e9fbb66002acf0ec4ff7408241e5f93 --- /dev/null +++ b/detail_png/Shaft_04175_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:638534cc726142dc200b2d248a4c579c1fc9b14fb6bcab8aa01404c13e85ff43 +size 44077 diff --git a/detail_png/Shaft_04175_title.png b/detail_png/Shaft_04175_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bbdb6bc874566e5ab41c15a3f84149436600657d --- /dev/null +++ b/detail_png/Shaft_04175_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee3653250ac335714084bad4e82ee616c2e68748cec248fc57ff4478940a950a +size 31125 diff --git a/detail_png/Shaft_04176_diam.png b/detail_png/Shaft_04176_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..88a194bad8fd96c6a9ef300a42dac548444a661b --- /dev/null +++ b/detail_png/Shaft_04176_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d87701a270f72078b4c65cc4da9c862cc4a637158f3b2d243062913a7804df5 +size 20884 diff --git a/detail_png/Shaft_04176_length.png b/detail_png/Shaft_04176_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a47f24109a03ae6206eea01f4fe8ba0b898cf439 --- /dev/null +++ b/detail_png/Shaft_04176_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18a9eeb5e0ae0c9108b515ac45c6d6f6c9e97ccf732de5171db1a21ee3592742 +size 27430 diff --git a/detail_png/Shaft_04176_title.png b/detail_png/Shaft_04176_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6cb8a0a5341694d7422f1c666148cdf071442bd8 --- /dev/null +++ b/detail_png/Shaft_04176_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c0438a012312e302e5dd4e0b5fc6dbe1d143d8b95493241a9e6657b32bd0e1d +size 28841 diff --git a/detail_png/Shaft_04183_diam.png b/detail_png/Shaft_04183_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8fa7bf4650f0557fcdb8e2d34eef6478b93fef54 --- /dev/null +++ b/detail_png/Shaft_04183_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55e4ca03c1e95f1e647eff16739be28d0c2538cbf41d61a73ef267c07b8c33ed +size 25824 diff --git a/detail_png/Shaft_04183_length.png b/detail_png/Shaft_04183_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3d52ad448209507bf42c145f28930d88ca1a26fc --- /dev/null +++ b/detail_png/Shaft_04183_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8014d2dbea3fbbd031bd3e260453d514b86cc5664192fa5ae3b49c64c682195 +size 35665 diff --git a/detail_png/Shaft_04183_title.png b/detail_png/Shaft_04183_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3db5faad76171c7b4747cdbe8bbbd716bac9ea53 --- /dev/null +++ b/detail_png/Shaft_04183_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e27b8d86990e534d959f086443b5e1238629131bb60bc392306f5079ec560da2 +size 35631 diff --git a/detail_png/Shaft_04193_diam.png b/detail_png/Shaft_04193_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b276ae0b729cee417e049ab5713ba3cefd5ad6a6 --- /dev/null +++ b/detail_png/Shaft_04193_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a334d6631b6dc3bc4bb8a703a34fbcdb103782efb4a96c6955235896dba3dc0d +size 31745 diff --git a/detail_png/Shaft_04193_length.png b/detail_png/Shaft_04193_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4e32ecc889d462b33ebb227220ed9c5e2ce4b952 --- /dev/null +++ b/detail_png/Shaft_04193_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:544783e547063f87725363feeb34352f02030e2b73e4df3239eb1e5ba29744e5 +size 31180 diff --git a/detail_png/Shaft_04193_title.png b/detail_png/Shaft_04193_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cc32dcb8088a459f5299552c665c48d3c2e22c9a --- /dev/null +++ b/detail_png/Shaft_04193_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3cdc44bc42cdce6f5d22033bd7f1032187a9747992a9297f31c673ca38a7d1c +size 28420 diff --git a/detail_png/Shaft_04194_diam.png b/detail_png/Shaft_04194_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fe00d904642d135ad3f0b035841a93e808972f0d --- /dev/null +++ b/detail_png/Shaft_04194_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7511c56aaced4690c82e516fbc0b6066e36884a173fb6ff4eab3f8db28194020 +size 19883 diff --git a/detail_png/Shaft_04194_length.png b/detail_png/Shaft_04194_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3ae5106f0402de4943d7f375c1e28b7089a5c27a --- /dev/null +++ b/detail_png/Shaft_04194_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cf3b318f863ad1a4c00f190f931d0f40b337f323a084a2640f7f113a9a4b9fb +size 27568 diff --git a/detail_png/Shaft_04194_title.png b/detail_png/Shaft_04194_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7352cd925a114fd78ef1f5e0e412beef0975fe26 --- /dev/null +++ b/detail_png/Shaft_04194_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3309160a41a355b46abb18bba16a0b3481d84927d44605977f48dde18998a590 +size 31169 diff --git a/detail_png/Shaft_04196_diam.png b/detail_png/Shaft_04196_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e0bd6a1e74f6be4807259327400bb8fe2ebd83af --- /dev/null +++ b/detail_png/Shaft_04196_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dd684679900b12ba73fc8227c8d310aff28b5303e68e319b792489129497bfc +size 28158 diff --git a/detail_png/Shaft_04196_length.png b/detail_png/Shaft_04196_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1db89b4cab5b7d9b6db425fbc1d6841be4cc4223 --- /dev/null +++ b/detail_png/Shaft_04196_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:768057d7904b8e7ea553ab2a95b3a5222a5399c8d1b4e9a655d077cc5bb18ef8 +size 25083 diff --git a/detail_png/Shaft_04196_title.png b/detail_png/Shaft_04196_title.png new file mode 100644 index 0000000000000000000000000000000000000000..62efa5fe378864d1bc4f291358ffd79d458a6b2a --- /dev/null +++ b/detail_png/Shaft_04196_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63f8c99eac4942b1534133afc4c686954f32cd300fad05efc90a0ffe676cfa5d +size 34893 diff --git a/detail_png/Shaft_04203_diam.png b/detail_png/Shaft_04203_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7f7ac9462df0f93d6a43d250e65934d841703bd6 --- /dev/null +++ b/detail_png/Shaft_04203_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40c499312a2ea6fe7e173a70a49fed468b5d246a7513889cbc27652e0b1e3fc6 +size 31377 diff --git a/detail_png/Shaft_04203_length.png b/detail_png/Shaft_04203_length.png new file mode 100644 index 0000000000000000000000000000000000000000..144fbdab6bf18ebb99ea0e541bd5d3c3dcd0cf1d --- /dev/null +++ b/detail_png/Shaft_04203_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcdd4a60a6d1b169193d797179130bdc5a672e2022a292195dcb206a903c52bd +size 44495 diff --git a/detail_png/Shaft_04203_title.png b/detail_png/Shaft_04203_title.png new file mode 100644 index 0000000000000000000000000000000000000000..844f1bddee484dda5a12a53f3ff3e0ed69031168 --- /dev/null +++ b/detail_png/Shaft_04203_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f52bd57bce1712552fcb1d976be6997af96ba828a4b746ca12f7a841622c506 +size 35935 diff --git a/detail_png/Shaft_04208_diam.png b/detail_png/Shaft_04208_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d5090b828bf68c29d671a87a0f582685f9dc701d --- /dev/null +++ b/detail_png/Shaft_04208_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94e020610c310e6d333935fd10d75f8ef0387017868cdf9f13374688c530fe09 +size 25559 diff --git a/detail_png/Shaft_04208_length.png b/detail_png/Shaft_04208_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e8010a870b1f9be31f693bcc6d0fbed2d1c92725 --- /dev/null +++ b/detail_png/Shaft_04208_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86f0ce544527142ee448efdb4aceefd0799e1a06e7518bc70ec230ac99b8b682 +size 34293 diff --git a/detail_png/Shaft_04208_title.png b/detail_png/Shaft_04208_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6797fc80437eff32df733e5d2ead99f5835d4ca1 --- /dev/null +++ b/detail_png/Shaft_04208_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:736330ec9d6be3a623a014450f176137b7a6759abf58caf26b00e51c7aa63e1e +size 36267 diff --git a/detail_png/Shaft_04209_diam.png b/detail_png/Shaft_04209_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cc64ab2c9488d896d6cd8551f242bfd8cceaa9e9 --- /dev/null +++ b/detail_png/Shaft_04209_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3ebb70fa53b497f7222dcbe893efc4465fc2ab5c94228a018866a11752ec43b +size 24571 diff --git a/detail_png/Shaft_04209_length.png b/detail_png/Shaft_04209_length.png new file mode 100644 index 0000000000000000000000000000000000000000..87856ccf121d7ca5d5c5f6f8a209d0857242a4b2 --- /dev/null +++ b/detail_png/Shaft_04209_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6843416b72ebfc953b71dc4f2a6cb9582721ee4ba60b378e6d137621bf25c176 +size 15746 diff --git a/detail_png/Shaft_04209_title.png b/detail_png/Shaft_04209_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d5469986634c29b86f578eb63080d9b561274e46 --- /dev/null +++ b/detail_png/Shaft_04209_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08af1a2389cfde98581a17160bde558df9f2b1a09924e24de959e7cf58bb7c46 +size 17609 diff --git a/detail_png/Shaft_04213_diam.png b/detail_png/Shaft_04213_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ffd817438d471d9b0cb2db8489768288363f9d41 --- /dev/null +++ b/detail_png/Shaft_04213_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d240fd7870454cd90ff6a135501c54ab02e5bb71b3f902e69eb26d432cfd6cc9 +size 24860 diff --git a/detail_png/Shaft_04213_length.png b/detail_png/Shaft_04213_length.png new file mode 100644 index 0000000000000000000000000000000000000000..effbb5786bf41cbe45a18be040d2d8767ef0ecdc --- /dev/null +++ b/detail_png/Shaft_04213_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:055788709802f744bdd1567fd8b8eab1e7066da79a4d4aa3bf7605571e665b9c +size 20874 diff --git a/detail_png/Shaft_04213_title.png b/detail_png/Shaft_04213_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7402304ce553be1bbf3994804548ad5bc2d63b0a --- /dev/null +++ b/detail_png/Shaft_04213_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7200a6250298a5f6c69944982137d22a5db2d3dc8227d824942abb2a806cf59 +size 17223 diff --git a/detail_png/Shaft_04215_diam.png b/detail_png/Shaft_04215_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..05ac1d91f0e4fc68d5b20a9450946e24fb0e48ca --- /dev/null +++ b/detail_png/Shaft_04215_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e9d60b78f6665d4e0354f5ba2d977b5dea8aebd95664a2ae36f90942d72bc58 +size 24748 diff --git a/detail_png/Shaft_04215_length.png b/detail_png/Shaft_04215_length.png new file mode 100644 index 0000000000000000000000000000000000000000..05847066b1ac0183f8823159aff27a99be8a0dc2 --- /dev/null +++ b/detail_png/Shaft_04215_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:344f6a5847691de4d2397e0c51b82a58ba2b1e1572f7a0a86b83889ca6f289a0 +size 21385 diff --git a/detail_png/Shaft_04215_title.png b/detail_png/Shaft_04215_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0dfc17662d59fc7d462498234fd84cf862638f27 --- /dev/null +++ b/detail_png/Shaft_04215_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e6089948aa3e75b08b03a3eaa0b59e7468d3f3c83ff684ff0fad025e4ee2c12 +size 20497 diff --git a/detail_png/Shaft_04220_diam.png b/detail_png/Shaft_04220_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bd243cc3fe9146757eba71e3b97c83a383a7cb09 --- /dev/null +++ b/detail_png/Shaft_04220_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a6352ca72d74f054ceb56f5f2536530eeb326f930ebc396613be72afe1ffedf +size 19729 diff --git a/detail_png/Shaft_04220_length.png b/detail_png/Shaft_04220_length.png new file mode 100644 index 0000000000000000000000000000000000000000..66a6af35eee5a4ca0a84fe38a5350d25feb26025 --- /dev/null +++ b/detail_png/Shaft_04220_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65c660be98ec13e8246f262efd48abb40fd5c0b4c9ee59fcc16ba26314f3e57e +size 24278 diff --git a/detail_png/Shaft_04220_title.png b/detail_png/Shaft_04220_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7504e94b6dd415d91b10cf9e014f28834023f54e --- /dev/null +++ b/detail_png/Shaft_04220_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2baa08c50dd8f5b5ee54b572eb2a8dbfc84bb578257e1dd26539589fb4a8e7a9 +size 29514 diff --git a/detail_png/Shaft_04224_diam.png b/detail_png/Shaft_04224_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..95372e7e85886ab88d535a0ab92d8fc8170d8e90 --- /dev/null +++ b/detail_png/Shaft_04224_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a354ff3cf38da3c60f6567059389a9a0e3677f95b77f59c8bb114317d87a979 +size 19989 diff --git a/detail_png/Shaft_04224_length.png b/detail_png/Shaft_04224_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0ed0f67be4f3c91f2e64ad76cac1560dbe7ba2fb --- /dev/null +++ b/detail_png/Shaft_04224_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:165bd413ee88dc7e4ed5dd442d45040b85a578dafa41d80504654f5a12193cd6 +size 17565 diff --git a/detail_png/Shaft_04224_title.png b/detail_png/Shaft_04224_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e22050d931da4d2f90a1241584371edd83065ea2 --- /dev/null +++ b/detail_png/Shaft_04224_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e025465cf3303cf3da15b4140cba73828794624e28f62bf5ab6db1cbb19556cc +size 22667 diff --git a/detail_png/Shaft_04225_diam.png b/detail_png/Shaft_04225_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..911c3e6c1a5094783eb74fe49d89ead359d364d7 --- /dev/null +++ b/detail_png/Shaft_04225_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaead073d27ad62ea50bbeef9bb13ccddd10791449244c925b76fbbb20f5fac6 +size 19921 diff --git a/detail_png/Shaft_04225_length.png b/detail_png/Shaft_04225_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f1b83c436496bacfd130977cea9c70c3c4b327e6 --- /dev/null +++ b/detail_png/Shaft_04225_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83700009b1848e8f89cc68ea44ebd52ba530c771467bea2bf1255bf3ff664c50 +size 16845 diff --git a/detail_png/Shaft_04225_title.png b/detail_png/Shaft_04225_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2c7a73fe4b97695c4f8f55fa729143555ffa075f --- /dev/null +++ b/detail_png/Shaft_04225_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5387afeea0a96955ce83ceb8197a2a84246603bfb787936d851ea8e3e5a78221 +size 15420 diff --git a/detail_png/Shaft_04226_diam.png b/detail_png/Shaft_04226_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3dc5dd7c2d70985f75f5500747723b2cb3c82b97 --- /dev/null +++ b/detail_png/Shaft_04226_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1653e73d4e77090353cad09281485a92bd986f23dc9571049911cbc8d523f1f +size 19126 diff --git a/detail_png/Shaft_04226_length.png b/detail_png/Shaft_04226_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc1966d5a990cae39eec692bf6b2a8ebb6df2a15 --- /dev/null +++ b/detail_png/Shaft_04226_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:693fd65906752ad5a65d259ce7543727caab89a196abf87d2e81b453e67f0fa9 +size 18643 diff --git a/detail_png/Shaft_04226_title.png b/detail_png/Shaft_04226_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b5b8cebded3d7a73ef0b60c1553169473827bf8d --- /dev/null +++ b/detail_png/Shaft_04226_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a6fe0a10d3f62723c867514476bee6871d5c9ba55676a5244e01a3253ff200b +size 30478 diff --git a/detail_png/Shaft_04228_diam.png b/detail_png/Shaft_04228_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4dc3f9a10909f69b78df80547d4064c16bce7791 --- /dev/null +++ b/detail_png/Shaft_04228_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67ce15de72a9d5b7d6f024e67615092bb3ed354447259dda9bc30b5faddeb1c8 +size 29404 diff --git a/detail_png/Shaft_04228_length.png b/detail_png/Shaft_04228_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13d30436594b5e75f06923b8bd82c9491cbef4c2 --- /dev/null +++ b/detail_png/Shaft_04228_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:483e4f47760ef0319714e76aa35e3b1b761b138f67f0614443cf05515539371f +size 26640 diff --git a/detail_png/Shaft_04228_title.png b/detail_png/Shaft_04228_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6eab48d52900084e0de741ea1828d84fc6475c74 --- /dev/null +++ b/detail_png/Shaft_04228_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7dc091a08a1d6c6b90b85a2de46c56c4d84c0e1cd1a46cbcc24aeaf91949d30b +size 25314 diff --git a/detail_png/Shaft_04229_diam.png b/detail_png/Shaft_04229_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8521315778682f4181943b0ee7252d9df697a99 --- /dev/null +++ b/detail_png/Shaft_04229_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2271834eb3d018e0674aa5c13aba0522a1fd41adb982817cd69dd4758849f8d6 +size 20141 diff --git a/detail_png/Shaft_04229_length.png b/detail_png/Shaft_04229_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e03b9f43070e6d61ea191edccc2fdf6438a09e37 --- /dev/null +++ b/detail_png/Shaft_04229_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6646ccf461b96e26706686ee7f27ce4f815edb8d15875625f4caa3d5d90df2d +size 18316 diff --git a/detail_png/Shaft_04229_title.png b/detail_png/Shaft_04229_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2f4a6302f39a75e89346e87d0fe336b5e055c071 --- /dev/null +++ b/detail_png/Shaft_04229_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02b79b9c14a298713442207dc36a70415fae2bfa6f4616b90940bf5b21fbedb8 +size 19380 diff --git a/detail_png/Shaft_04230_diam.png b/detail_png/Shaft_04230_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cf25b7f59621685eda3ba251a2fc076022932ad6 --- /dev/null +++ b/detail_png/Shaft_04230_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7d9ae87e986d122287176e66580340c7d60bc1ac23df20f9440098c5ae38de0 +size 30956 diff --git a/detail_png/Shaft_04230_length.png b/detail_png/Shaft_04230_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f108b045ce53a2892c9fccdcfe040a11abdeb2ae --- /dev/null +++ b/detail_png/Shaft_04230_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92bccdec05b46c0bfdc6659af6325f1b20de928e6c323c4869356256842b0e4f +size 39962 diff --git a/detail_png/Shaft_04230_title.png b/detail_png/Shaft_04230_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8a9406b2435fb04bbc837e8aecb20ca5eae536a9 --- /dev/null +++ b/detail_png/Shaft_04230_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44c8a27b6b4abeea624cb12ec7a49c81788706d10367226096ec6342bc194d8f +size 32570 diff --git a/detail_png/Shaft_04231_diam.png b/detail_png/Shaft_04231_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0bc738fd48c612fcc7041e80b3151b8b1e1afa6f --- /dev/null +++ b/detail_png/Shaft_04231_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad6a1c7e685d67aa50a0e60d5dcd82224b75d86f9cd45e375f6ae0eb3a4b071e +size 32200 diff --git a/detail_png/Shaft_04231_length.png b/detail_png/Shaft_04231_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c1412a0d6fa89676ef5fc1c783e5f660cd0f5e21 --- /dev/null +++ b/detail_png/Shaft_04231_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30f9412925192cc022572b81ce094adc8f19e83c11c31eeadd30e2a09bdd662c +size 40893 diff --git a/detail_png/Shaft_04231_title.png b/detail_png/Shaft_04231_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f6cdc23a608be5c639c967e01a3dd63b82cb978e --- /dev/null +++ b/detail_png/Shaft_04231_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86b675afc341d9ecd573c52a9a341cbc190527a7e7a196248f4312ab242517f0 +size 35113 diff --git a/detail_png/Shaft_04234_diam.png b/detail_png/Shaft_04234_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9b665b68105fcb26f3a60ccad3fe0b031c2b66fd --- /dev/null +++ b/detail_png/Shaft_04234_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8b7ef5c0f8a571bcebdc57b7f80786f5f66d48e5b2c57c682a457d690da2812 +size 19558 diff --git a/detail_png/Shaft_04234_length.png b/detail_png/Shaft_04234_length.png new file mode 100644 index 0000000000000000000000000000000000000000..470045627e1fa041984915e572e7dc0bc80c5742 --- /dev/null +++ b/detail_png/Shaft_04234_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5393bd97f39aa704ace1e6575c0492e00ec41aacda210430a5a0e31f7bb30030 +size 15310 diff --git a/detail_png/Shaft_04234_title.png b/detail_png/Shaft_04234_title.png new file mode 100644 index 0000000000000000000000000000000000000000..12f7e19e77059975637e03e37ebb45481fd86fc4 --- /dev/null +++ b/detail_png/Shaft_04234_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06908cc2eab9c8f116be5e90ca64054d384906ebebf7cf46fcbd26852a6d1dba +size 25281 diff --git a/detail_png/Shaft_04236_diam.png b/detail_png/Shaft_04236_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..380ded12787eec4549e304b19255f96e00bc522c --- /dev/null +++ b/detail_png/Shaft_04236_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9ab9917c9574c91500d2c4ab113c53f1867121d9ad9ae5264e15d4388c6d65d +size 19515 diff --git a/detail_png/Shaft_04236_length.png b/detail_png/Shaft_04236_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ef4421bb5421a25c839bf1a84b8373d4418ab489 --- /dev/null +++ b/detail_png/Shaft_04236_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c708fd30ce202203fcd18bf5292538120b28317a49938c28f48167e8803f675 +size 18181 diff --git a/detail_png/Shaft_04236_title.png b/detail_png/Shaft_04236_title.png new file mode 100644 index 0000000000000000000000000000000000000000..748b3f99102827c798b02359a49bfc6da4d780ba --- /dev/null +++ b/detail_png/Shaft_04236_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76618be622b3d7c884bc326d8f20d7c62d50d94a07f59df512d760c550a61ec9 +size 17721 diff --git a/detail_png/Shaft_04238_diam.png b/detail_png/Shaft_04238_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..43caefdc0802f1bdd2a663605634d4be38d8d722 --- /dev/null +++ b/detail_png/Shaft_04238_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbc67859d2adea55de32b5cb23d16fe33bebe33bf147e54de1d4f39f68f349a0 +size 24438 diff --git a/detail_png/Shaft_04238_length.png b/detail_png/Shaft_04238_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c8ef380b26d4411f8ffbf783fdbd93dd1bcc8e8a --- /dev/null +++ b/detail_png/Shaft_04238_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82d0d4aa48ddbb8385505a78392f01a0ddcad231fd2bb3492b856128d28b58c5 +size 20854 diff --git a/detail_png/Shaft_04238_title.png b/detail_png/Shaft_04238_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a3322cd90a2de9af089aa0fd605b70714d5a4c56 --- /dev/null +++ b/detail_png/Shaft_04238_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d4d8923e2eb4026407918093605d5a66580fb15bf5753ce65a00f1afec00311 +size 22839 diff --git a/detail_png/Shaft_04250_diam.png b/detail_png/Shaft_04250_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7ff890c1e77ae49c8182ab5d0eb71947c4b03645 --- /dev/null +++ b/detail_png/Shaft_04250_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:602284a48193722584b7eafb3d03946734d048623526e6b548dd69158ff17c0b +size 20151 diff --git a/detail_png/Shaft_04250_length.png b/detail_png/Shaft_04250_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a60a925e98c3369513c0a5f87c3c9469f77c6705 --- /dev/null +++ b/detail_png/Shaft_04250_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee678894c047ebd6f7439c88e53e9260fccc52415a5d06484628ec64d742170b +size 16179 diff --git a/detail_png/Shaft_04250_title.png b/detail_png/Shaft_04250_title.png new file mode 100644 index 0000000000000000000000000000000000000000..046be290792d11af07e67f1206bdefcd1d1abe57 --- /dev/null +++ b/detail_png/Shaft_04250_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d8d3bc2f13dfb70860d943bfb436bcbeff985384de883e2924f93ba85860bc7 +size 18010 diff --git a/detail_png/Shaft_04259_diam.png b/detail_png/Shaft_04259_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b8730f57cde8aaa81d9a5e02b55c2f361a41ed2b --- /dev/null +++ b/detail_png/Shaft_04259_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:830e52518ddc96a7ba41568b9a16463922b4906d760e23e5c439adbfe79030fc +size 24395 diff --git a/detail_png/Shaft_04259_length.png b/detail_png/Shaft_04259_length.png new file mode 100644 index 0000000000000000000000000000000000000000..908c1da25a96e060021d34aa6849a1b4fd9674a0 --- /dev/null +++ b/detail_png/Shaft_04259_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b291d27cbcc2920fa8ca229c029c3ebe87a9a9ea16d311cd5fdae65f34166b4 +size 32887 diff --git a/detail_png/Shaft_04259_title.png b/detail_png/Shaft_04259_title.png new file mode 100644 index 0000000000000000000000000000000000000000..052684854d082bc885a50f7023d0bbedf4ef0dac --- /dev/null +++ b/detail_png/Shaft_04259_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:780b5ebcba721bf9031d4dd74dbbbe4d2eb77fdb33d4a9afec604456f4254296 +size 29534 diff --git a/detail_png/Shaft_04260_diam.png b/detail_png/Shaft_04260_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..34c54f981d56fa920352c424ea83d67337bea1c2 --- /dev/null +++ b/detail_png/Shaft_04260_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f980451774d0fa8185784815db27ae03918f961b150960a6abbf844e66a6a351 +size 19928 diff --git a/detail_png/Shaft_04260_length.png b/detail_png/Shaft_04260_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ab72961ee6217e63f5d4db6c4a12985be25c7d83 --- /dev/null +++ b/detail_png/Shaft_04260_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0f8b109b39e957a107fac99991e259ee573cbfeb1a1ee74973d7b4e64849a75 +size 15768 diff --git a/detail_png/Shaft_04260_title.png b/detail_png/Shaft_04260_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6daf8a7e98aa5fe0ee594b25b8725c823b03dcc5 --- /dev/null +++ b/detail_png/Shaft_04260_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:312f7587cc05c3bbb032c6a1b7846472b5d6eafebad1941045b60ae5b7a16c35 +size 18716 diff --git a/detail_png/Shaft_04261_diam.png b/detail_png/Shaft_04261_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..67b6a845b5db7b7f9730dfdd3ec97637a505d3d8 --- /dev/null +++ b/detail_png/Shaft_04261_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:554e19d1c8a3523d7c0af5c3c6c92c93fdc8cafe5e8f3ac10619846e6b4fd293 +size 19274 diff --git a/detail_png/Shaft_04261_length.png b/detail_png/Shaft_04261_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a4531d1553cf3ead8d4d11d04cdf5558f6b04af2 --- /dev/null +++ b/detail_png/Shaft_04261_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7354ae39ce999744f8de5ed81277a4c27171d77f9ea6441cda2905f9d1f4ea98 +size 23613 diff --git a/detail_png/Shaft_04261_title.png b/detail_png/Shaft_04261_title.png new file mode 100644 index 0000000000000000000000000000000000000000..041157cc637130c7dc2619a6f0a55aca65c90c22 --- /dev/null +++ b/detail_png/Shaft_04261_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18d1bbda59e81ec968752f5539e6d824681d4afe975dd277114ce90efce2d3fd +size 29443 diff --git a/detail_png/Shaft_04264_diam.png b/detail_png/Shaft_04264_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..44c0790e45496aecf4ed0e5627ca08f08bf5c2cb --- /dev/null +++ b/detail_png/Shaft_04264_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60c3f682980de6bf4cbffa4e45ad425871c0518b212fb971b70ba4adf11b98dd +size 20343 diff --git a/detail_png/Shaft_04264_length.png b/detail_png/Shaft_04264_length.png new file mode 100644 index 0000000000000000000000000000000000000000..47dad64e762c566d49d80bec05c1602ff1b4630f --- /dev/null +++ b/detail_png/Shaft_04264_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:721a53472eb4e9ecc7d5f05d8fb4bd30942288cb1db34ab89cee0f5dd836750c +size 25931 diff --git a/detail_png/Shaft_04264_title.png b/detail_png/Shaft_04264_title.png new file mode 100644 index 0000000000000000000000000000000000000000..28041685529432316cd4958e288f43684a709e9a --- /dev/null +++ b/detail_png/Shaft_04264_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d109fb7ee04c6c597d469cead4c123df0f772f0748bca0fd18f70659a4e01a6a +size 28947 diff --git a/detail_png/Shaft_04267_diam.png b/detail_png/Shaft_04267_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..11ca23b90f5bee3dd25709a051f4935cec11ea99 --- /dev/null +++ b/detail_png/Shaft_04267_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ce903d22215ae0ada910bc32645aa065d6ed6e1b88c4965cc1726b53849c43f +size 19796 diff --git a/detail_png/Shaft_04267_length.png b/detail_png/Shaft_04267_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e30131af7e20ffe51684fb9ccbb9307294f31a69 --- /dev/null +++ b/detail_png/Shaft_04267_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adfe09e66200308376aba02555d3cc1c673ac1c102c76f763fc54233016afae5 +size 17142 diff --git a/detail_png/Shaft_04267_title.png b/detail_png/Shaft_04267_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ef26cf000e421fb93f1775a2bc31bd3e86274893 --- /dev/null +++ b/detail_png/Shaft_04267_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:493bc610b30f15ba9c4040979f247c017c8743e0c9b325c3c1c4789b69cbcc86 +size 13656 diff --git a/detail_png/Shaft_04275_diam.png b/detail_png/Shaft_04275_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..723f718b4098b9047893252e16f7ea459c6aca7c --- /dev/null +++ b/detail_png/Shaft_04275_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1df54a1242511a1d4a67c65857ad221a6f2d45a198eceef28718058c4f8f91f1 +size 29962 diff --git a/detail_png/Shaft_04275_length.png b/detail_png/Shaft_04275_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a2076848ed5234df2166058640f9ac491414d946 --- /dev/null +++ b/detail_png/Shaft_04275_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ad74d1ca555dba4878ff1de21eda3803bcfcd339644e4ee30ac65a98136245e +size 30232 diff --git a/detail_png/Shaft_04275_title.png b/detail_png/Shaft_04275_title.png new file mode 100644 index 0000000000000000000000000000000000000000..26288ce65ac9af08f38a484c9370221ea5d866e8 --- /dev/null +++ b/detail_png/Shaft_04275_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a61e593a793de37819c861d148678fcdcb53c7aeec000a1d6ca29a780ef00f4 +size 31147 diff --git a/detail_png/Shaft_04277_diam.png b/detail_png/Shaft_04277_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3822c300483aec87b8fbfc1546463ec858c0a7b2 --- /dev/null +++ b/detail_png/Shaft_04277_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19c4527f2edfc70f90a1500229107f9e63845a6e34e01da4ae736be875478925 +size 26347 diff --git a/detail_png/Shaft_04277_length.png b/detail_png/Shaft_04277_length.png new file mode 100644 index 0000000000000000000000000000000000000000..44bfb26431f7ab8ebc5a64771e0842bae31036a9 --- /dev/null +++ b/detail_png/Shaft_04277_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ab3a1e2288a371975a1efeec518c1d024250388acc25a829805642058d89a20 +size 24872 diff --git a/detail_png/Shaft_04277_title.png b/detail_png/Shaft_04277_title.png new file mode 100644 index 0000000000000000000000000000000000000000..46c730f7e966e53a7c9f672ef44c8f19681a95d5 --- /dev/null +++ b/detail_png/Shaft_04277_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e1755014ad217b5e9341bc93be1cd140f86df6bcbed3477485b312c15956777 +size 33388 diff --git a/detail_png/Shaft_04278_diam.png b/detail_png/Shaft_04278_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..49be14aa428169a551cfd9e039a8828c8ae484c0 --- /dev/null +++ b/detail_png/Shaft_04278_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:407d7ca16f80bc2a4ec44ce675748ad818d02f6077e63e60c6ebdf369f3dc840 +size 42023 diff --git a/detail_png/Shaft_04278_length.png b/detail_png/Shaft_04278_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6e500df587acf1682e056a1a13eb4cd9e0c7306a --- /dev/null +++ b/detail_png/Shaft_04278_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9a7df6577411f061ccf3af14641453d3ba18c64b23f278ce2415775c6d087bf +size 61515 diff --git a/detail_png/Shaft_04278_title.png b/detail_png/Shaft_04278_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ac05eb154a3068b381081e4437f0fd2cfe618ba8 --- /dev/null +++ b/detail_png/Shaft_04278_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65b9b9f11a9c61189ea276fa2096a1bdfee2a802838f0e08ec4731181cebd520 +size 32598 diff --git a/detail_png/Shaft_04284_diam.png b/detail_png/Shaft_04284_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7107656bda5adf8d2ea8e2b7cea36370323e595c --- /dev/null +++ b/detail_png/Shaft_04284_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb4ea192d8a2f724016457d15c0b352330fe37931a52a273072e86eb97b8b9f5 +size 19908 diff --git a/detail_png/Shaft_04284_length.png b/detail_png/Shaft_04284_length.png new file mode 100644 index 0000000000000000000000000000000000000000..15fe8aea9359d27b66f6b4020a5f5561eedfec09 --- /dev/null +++ b/detail_png/Shaft_04284_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72b16c93cbcbc906d9270a7b8f4830a7ecc6a0b3f21fb9cad11f5bcd4a1d2d2d +size 27446 diff --git a/detail_png/Shaft_04284_title.png b/detail_png/Shaft_04284_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d43827101bf0b3636521fc1e09533754b0e39622 --- /dev/null +++ b/detail_png/Shaft_04284_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:239c759c6a6d96a0251b7a3b0df74eeadc55368f3f30528ec7eeee93a13b45f8 +size 35240 diff --git a/detail_png/Shaft_04285_diam.png b/detail_png/Shaft_04285_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8868dfff435966a38155c82662f1a562717b9273 --- /dev/null +++ b/detail_png/Shaft_04285_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1adf770d61a0340fd7e21dad6beebf5bb569d0f5e0f21c920f07a5327c4dd65 +size 19308 diff --git a/detail_png/Shaft_04285_length.png b/detail_png/Shaft_04285_length.png new file mode 100644 index 0000000000000000000000000000000000000000..86ea73dd867397c7fb4b6541db51184e0b37a695 --- /dev/null +++ b/detail_png/Shaft_04285_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb79a8324335fe1b76eb2e2bb1673c809145351bfb31b99d491a12e7111f2789 +size 16205 diff --git a/detail_png/Shaft_04285_title.png b/detail_png/Shaft_04285_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a8ed3861118f677fbf567e512d6c5fabf22d864d --- /dev/null +++ b/detail_png/Shaft_04285_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0e9d15ed2c35b152ec3a393ef87d4a48cc0ba2f08384b644326f07d1575b581 +size 16396 diff --git a/detail_png/Shaft_04286_diam.png b/detail_png/Shaft_04286_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..65bb2b6b582911fd0c79e608a7d1051746130405 --- /dev/null +++ b/detail_png/Shaft_04286_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0e167964a7328fcce9e9b60c2b563ffee25a5c0bf01ece7f4959a9837d84461 +size 21010 diff --git a/detail_png/Shaft_04286_length.png b/detail_png/Shaft_04286_length.png new file mode 100644 index 0000000000000000000000000000000000000000..afee3ada934ea498dc7189ca0b8ca51cc9829060 --- /dev/null +++ b/detail_png/Shaft_04286_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e58355b98af026f03587e24577aee3903ec1500c9fa8b9c0ce46be7b0c630b9 +size 22709 diff --git a/detail_png/Shaft_04286_title.png b/detail_png/Shaft_04286_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e20c3365ae93ec0c19df46841262e16adaffb385 --- /dev/null +++ b/detail_png/Shaft_04286_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebbb28f2c9dc637bb7b50e97f4f2f7634194266d72da620b69ff36632ae41877 +size 30313 diff --git a/detail_png/Shaft_04288_diam.png b/detail_png/Shaft_04288_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c494395d0b5a1b05869020931d9a0f56c8c44475 --- /dev/null +++ b/detail_png/Shaft_04288_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38ef04ab2ee4d9d75b8910d935ca2e88893c0c37a41664606c36dc36d2cca630 +size 19704 diff --git a/detail_png/Shaft_04288_length.png b/detail_png/Shaft_04288_length.png new file mode 100644 index 0000000000000000000000000000000000000000..979d27a255369021bad6b2c56528002cb6317261 --- /dev/null +++ b/detail_png/Shaft_04288_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d24ddd89864bbf4655f695e74452d6e72f938ab14543ec3c407daa98505b700 +size 15382 diff --git a/detail_png/Shaft_04288_title.png b/detail_png/Shaft_04288_title.png new file mode 100644 index 0000000000000000000000000000000000000000..36afd6f33b8d48ec4f6ace5281ece4b3f46bacbd --- /dev/null +++ b/detail_png/Shaft_04288_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7e6b435abf740c16af6acf46ce175e519c5729a91354444e468b185b4c205ae +size 21326 diff --git a/detail_png/Shaft_04289_diam.png b/detail_png/Shaft_04289_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f17942a90ecaa6944c1197f4447bb92f3b952aee --- /dev/null +++ b/detail_png/Shaft_04289_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8490b5ee618730d274b0e241761b3d7b80fa73ecfade84ce913b838ba481cde4 +size 20810 diff --git a/detail_png/Shaft_04289_length.png b/detail_png/Shaft_04289_length.png new file mode 100644 index 0000000000000000000000000000000000000000..95bb0086fad1b473346df58ca2a754a3e1e69881 --- /dev/null +++ b/detail_png/Shaft_04289_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a53c1445efe1da2b7d263d45648482c8d22eb9b2154fd635099c2c2a02e9869c +size 25979 diff --git a/detail_png/Shaft_04289_title.png b/detail_png/Shaft_04289_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c347b9aba53fc93aa673adb87bce1fd077c0c1f8 --- /dev/null +++ b/detail_png/Shaft_04289_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1cfbaea4489ffb22007bed8c3e915d38410b1ce2fe9806b60dddc7cbfdf51e9 +size 30618 diff --git a/detail_png/Shaft_04291_diam.png b/detail_png/Shaft_04291_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..504ba05c0a4da78b8f344500a1ce6fd659032e1f --- /dev/null +++ b/detail_png/Shaft_04291_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8762df1ccff03eb74bf9c3ec37496f179d3facad52478cbae09e73d9e867362 +size 36240 diff --git a/detail_png/Shaft_04291_length.png b/detail_png/Shaft_04291_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9591c26b6681f22c20ba7aedead1c1d9876e6384 --- /dev/null +++ b/detail_png/Shaft_04291_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc535cc496634a4e62be2897224fca81974fae3e586d88cbb462533690e92e84 +size 53195 diff --git a/detail_png/Shaft_04291_title.png b/detail_png/Shaft_04291_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f58e2ba624bb9f736cbf5af98e0f962b9d9e0bc6 --- /dev/null +++ b/detail_png/Shaft_04291_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddd77e88472246c529ef3cbf05a262aa65c39d061db04375eea56afb445afabb +size 32678 diff --git a/detail_png/Shaft_04298_diam.png b/detail_png/Shaft_04298_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..942b37f509d63204ac8d5bfc0b22128aa4eda19a --- /dev/null +++ b/detail_png/Shaft_04298_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d81c15fad72b351732790b1c73fc397a8ed01b21671818fcfdadaecc4b1651d6 +size 31015 diff --git a/detail_png/Shaft_04298_length.png b/detail_png/Shaft_04298_length.png new file mode 100644 index 0000000000000000000000000000000000000000..56d202ee84edc93ee348f171c0c617f31ad2f2ff --- /dev/null +++ b/detail_png/Shaft_04298_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebed8877740e1b19213eb7cbccfe2bdc68b27009530383f610854eed6ecb8230 +size 26491 diff --git a/detail_png/Shaft_04298_title.png b/detail_png/Shaft_04298_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0fa7a0a0a396986fec4ac101450d7b6c217f94e2 --- /dev/null +++ b/detail_png/Shaft_04298_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da462d8e7b4b91f021d00123dfeef4d1fb5d61b2f8eaa6ab4076b9c5da277f4d +size 24685 diff --git a/detail_png/Shaft_04299_diam.png b/detail_png/Shaft_04299_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e895fdf6de1c3118ed5d248628018954c4ce9bbb --- /dev/null +++ b/detail_png/Shaft_04299_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cbabc7979ed784807bb4d4dca3c3f87db31c51c78f43ddfa96cbcfe062b4c76 +size 24820 diff --git a/detail_png/Shaft_04299_length.png b/detail_png/Shaft_04299_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1918ebe23b03211981b70ddb8ee6cbd9d9a0c7cd --- /dev/null +++ b/detail_png/Shaft_04299_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78f03f6cb120711bfe62436a00df498b99c9d812ecb8484ce113d1bfc8697fe0 +size 34899 diff --git a/detail_png/Shaft_04299_title.png b/detail_png/Shaft_04299_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c14a949a65048401d467068e790c8c2bd0bf87d0 --- /dev/null +++ b/detail_png/Shaft_04299_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7108f7f6013e7ed0c7ebe88e132a3f5013e0042d41453633090b98f5001e43c7 +size 33000 diff --git a/detail_png/Shaft_04304_diam.png b/detail_png/Shaft_04304_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7d181891686ad29ccd219eec34a3f030ca8164d9 --- /dev/null +++ b/detail_png/Shaft_04304_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80254fccdf8dd1226db1b5d67d0b22af00249c72c48cdd3067f7cc4fd647430f +size 27252 diff --git a/detail_png/Shaft_04304_length.png b/detail_png/Shaft_04304_length.png new file mode 100644 index 0000000000000000000000000000000000000000..815f25a8dab78a83148c6ee1d22ae9b2e5a10834 --- /dev/null +++ b/detail_png/Shaft_04304_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c903918081f2b08ba2ee18d5a5e77dfeaced1bfe915d05f3312b0db64421e153 +size 27649 diff --git a/detail_png/Shaft_04304_title.png b/detail_png/Shaft_04304_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4a2967383a1dc7c1f603986d8ceb99cde7d02e11 --- /dev/null +++ b/detail_png/Shaft_04304_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79fca63de7cd0508e64797b9bb7e40333602af6990680fbc13d5cdade05e8575 +size 28450 diff --git a/detail_png/Shaft_04305_diam.png b/detail_png/Shaft_04305_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a705b2f9eb480c8f110afba51f71be6f1ad7ee62 --- /dev/null +++ b/detail_png/Shaft_04305_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12fef722fb7a241418ab6dee08a4944cdffb91c034ffecfc57b11c81ddd7b44c +size 14005 diff --git a/detail_png/Shaft_04305_length.png b/detail_png/Shaft_04305_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0528697f5352057a57116ca8e72a22a224a3a822 --- /dev/null +++ b/detail_png/Shaft_04305_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e98b3ddb650d3ad6955a0fb76f55c960b424d0b2dc71939857533ea7e2d95cd9 +size 13677 diff --git a/detail_png/Shaft_04305_title.png b/detail_png/Shaft_04305_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c6e81c9599e29cfc6c5e7f752070d3d9a93cea37 --- /dev/null +++ b/detail_png/Shaft_04305_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d29b2e04bebb8d3043cbd0723bdd3b1dedd4418375be059cd432015e765bc539 +size 13450 diff --git a/detail_png/Shaft_04306_diam.png b/detail_png/Shaft_04306_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2917de9db584780a7f26fbbb2b14e763d164bab1 --- /dev/null +++ b/detail_png/Shaft_04306_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1c48fa17b4643b99a3101da34dad863e444b9ae41c3e247483d1c778424a961 +size 19270 diff --git a/detail_png/Shaft_04306_length.png b/detail_png/Shaft_04306_length.png new file mode 100644 index 0000000000000000000000000000000000000000..66c02098959d8435fd45524ab6e52acecf812412 --- /dev/null +++ b/detail_png/Shaft_04306_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4fad5db2e2a1e56c5729ee3e0855e7fb7484f12c9f586f375de48093097ebb5c +size 23282 diff --git a/detail_png/Shaft_04306_title.png b/detail_png/Shaft_04306_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b51075286f66c0eb9e1f79827425ea2ed998d782 --- /dev/null +++ b/detail_png/Shaft_04306_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c42e4ad840e48a00dd2a59e9bc458c37a5e2be6e376d143164e8b27617f98d51 +size 35657 diff --git a/detail_png/Shaft_04307_diam.png b/detail_png/Shaft_04307_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0506711d7925f4394ef2b71c8b9b0390d389a3c3 --- /dev/null +++ b/detail_png/Shaft_04307_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa5e8a9981ae708ebdba687a4ee2079edd494382c66b548efc51023787e0def2 +size 19843 diff --git a/detail_png/Shaft_04307_length.png b/detail_png/Shaft_04307_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9e7a9c5128ca63ba8513fcd3637dc7a631f6dbe9 --- /dev/null +++ b/detail_png/Shaft_04307_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9037f59d8390a4f0476130203b7d547e0a5b66a20ff204d36b74b1c070ddba1a +size 18839 diff --git a/detail_png/Shaft_04307_title.png b/detail_png/Shaft_04307_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0a6b1a42590926b92a05e8f115062396d2eb0c2e --- /dev/null +++ b/detail_png/Shaft_04307_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8611415451003bcfba4886c8b5e9a551d58b5fb19fdd86b3f90f8d3611307aa6 +size 21795 diff --git a/detail_png/Shaft_04310_diam.png b/detail_png/Shaft_04310_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..328deb2889cc42b66b60676bd98083e7e5bc25b6 --- /dev/null +++ b/detail_png/Shaft_04310_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8152dc7f8df07622b83ad13c2120792a6536bb95e0edb882512b774dc12a410 +size 27161 diff --git a/detail_png/Shaft_04310_length.png b/detail_png/Shaft_04310_length.png new file mode 100644 index 0000000000000000000000000000000000000000..69dc4aca2210393058cac5831ada01a756837102 --- /dev/null +++ b/detail_png/Shaft_04310_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af8c88f51ce346d20a503dcf42686a503504489b8d50d53a24088ac5786a7779 +size 30971 diff --git a/detail_png/Shaft_04310_title.png b/detail_png/Shaft_04310_title.png new file mode 100644 index 0000000000000000000000000000000000000000..773b00f60c4db1b6032b6714ddf5e6c350f71047 --- /dev/null +++ b/detail_png/Shaft_04310_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8efc7e4e9ca87debd3c2dff6452216f433a946d23beb25065846d848d1adb386 +size 34626 diff --git a/detail_png/Shaft_04313_diam.png b/detail_png/Shaft_04313_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..076dfd399faf3553a439b535c7ea6d5937b3cc45 --- /dev/null +++ b/detail_png/Shaft_04313_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbd21397e3be58a976118e5445c66eb68d3a958ba1c11c08821dbe7899349fa6 +size 25409 diff --git a/detail_png/Shaft_04313_length.png b/detail_png/Shaft_04313_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f58cb37d819aa1ffa8343cd1157008f9dda5fdbd --- /dev/null +++ b/detail_png/Shaft_04313_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:959e9cf5fdc8a836384e6045f679771ae76dedbdd41eb454493bd097b9b016a9 +size 25003 diff --git a/detail_png/Shaft_04313_title.png b/detail_png/Shaft_04313_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e2a14d9cb7d0af1db82ecdafacfcb29b0be5ff0d --- /dev/null +++ b/detail_png/Shaft_04313_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:702839e956aee70d719a43a304521d0540be3ff206567eaac6b7e20e200e609b +size 33267 diff --git a/detail_png/Shaft_04314_diam.png b/detail_png/Shaft_04314_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..79ba5a646c54d9089927d2f808c9cd612657dffb --- /dev/null +++ b/detail_png/Shaft_04314_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be025411cc7b1ebd104d025d07cf8c6d8226921ad2558910e25fdc635c892931 +size 24987 diff --git a/detail_png/Shaft_04314_length.png b/detail_png/Shaft_04314_length.png new file mode 100644 index 0000000000000000000000000000000000000000..14db8a4a3e86c4e642e0ee1a4cd5fb5618195caf --- /dev/null +++ b/detail_png/Shaft_04314_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce982e7eec288f54b2624eb3b52bcb3c67c5284758a46cd1f3a117c44238678d +size 20039 diff --git a/detail_png/Shaft_04314_title.png b/detail_png/Shaft_04314_title.png new file mode 100644 index 0000000000000000000000000000000000000000..961151e4bf4f8031e5e249f1ad905d19a280a883 --- /dev/null +++ b/detail_png/Shaft_04314_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6828ba0fa35ae3b66a0a345c12e30a8714aa6db794e8e6e9b0b816dda9fca8c9 +size 23470 diff --git a/detail_png/Shaft_04315_diam.png b/detail_png/Shaft_04315_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9a4739ac318acca01ef34bb113af5237de8fa407 --- /dev/null +++ b/detail_png/Shaft_04315_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3f5acae4226d0dcbffff3f31a67211b9322d7566b5fb9f83882d92f5b3aed6a +size 24818 diff --git a/detail_png/Shaft_04315_length.png b/detail_png/Shaft_04315_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f1f4975fbd3694362c0442cfd090cf4fe040798f --- /dev/null +++ b/detail_png/Shaft_04315_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5cf7c6e37cbf6ddb04f3574c272b44063a6ff2fedfda2b72ce5ea0c2dc050776 +size 23286 diff --git a/detail_png/Shaft_04315_title.png b/detail_png/Shaft_04315_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d172b60dcbc054268a4e6a63c53d03c05b337c38 --- /dev/null +++ b/detail_png/Shaft_04315_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e1fc0523bd8b17631794a6194c880ed66d9bc5a11f56817b673ba35a5cd5544 +size 28044 diff --git a/detail_png/Shaft_04319_diam.png b/detail_png/Shaft_04319_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d044af4970b1204dc55d38791e7e7e06d5602d26 --- /dev/null +++ b/detail_png/Shaft_04319_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:562efd9aefc40a44b3a59160852caaee1810edb9e81adcb36b2d019e0fbdc8fc +size 25164 diff --git a/detail_png/Shaft_04319_length.png b/detail_png/Shaft_04319_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f2d7552e9f05e96a9a57d941c4f3c167025bb9aa --- /dev/null +++ b/detail_png/Shaft_04319_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd43d323148c082fbe28a522283461aec11c2d21061936c3f6367a1b78535831 +size 25968 diff --git a/detail_png/Shaft_04319_title.png b/detail_png/Shaft_04319_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b6f2403459d7d8dd99a23df750c9644bdfc8fc29 --- /dev/null +++ b/detail_png/Shaft_04319_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48dbe0665c4f47aa14aaaa5373627f5af865630e054865a09b84046b40f7f60c +size 34894 diff --git a/detail_png/Shaft_04320_diam.png b/detail_png/Shaft_04320_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..970dc17f69da8e1d5b746dc66466150faac5bd85 --- /dev/null +++ b/detail_png/Shaft_04320_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:477cbb4774628eb62cd8a9cadfc7ab123d880cb3187ce2a81c3decb5afffe5ce +size 26732 diff --git a/detail_png/Shaft_04320_length.png b/detail_png/Shaft_04320_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4f4ffb13e2d24b9a6f986baf9d497b8a2f70a26d --- /dev/null +++ b/detail_png/Shaft_04320_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fec0c8c641a4f2a04cb3ff51625f54366668515b8ee1f7e270c962cac7c65cdf +size 35780 diff --git a/detail_png/Shaft_04320_title.png b/detail_png/Shaft_04320_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0743efe33c85d52d07f1d36620a2e0296f78dbf9 --- /dev/null +++ b/detail_png/Shaft_04320_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6bd97afe3ac2a718547d57d885be37e125f774178760c443dc67059829be5e79 +size 32722 diff --git a/detail_png/Shaft_04322_diam.png b/detail_png/Shaft_04322_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..190437396790aa95d3111dcefa7b3aab7ed495d7 --- /dev/null +++ b/detail_png/Shaft_04322_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05be679131cb2c47e7ea7f6fa4c5e9c7c546afa54834df2a05322ee3621fb5ca +size 24863 diff --git a/detail_png/Shaft_04322_length.png b/detail_png/Shaft_04322_length.png new file mode 100644 index 0000000000000000000000000000000000000000..95ce15dc8d60890751c03f70ed096e096a111533 --- /dev/null +++ b/detail_png/Shaft_04322_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fd87ada442468a04c2f1333d91dbf109a5b2cc01c9d93eb75bd6431d08e8f89 +size 21853 diff --git a/detail_png/Shaft_04322_title.png b/detail_png/Shaft_04322_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c242da624acffe13e1824d878bda8bfa329ba435 --- /dev/null +++ b/detail_png/Shaft_04322_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:971222f15f30c364f3b14370f553f3caee67bd7fe447b67b6bb4a877adbf59fa +size 24653 diff --git a/detail_png/Shaft_04324_diam.png b/detail_png/Shaft_04324_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..67eca0c1beb50a60d619905774ce6363c81b8783 --- /dev/null +++ b/detail_png/Shaft_04324_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2277ec823cca982307b6867e61254e81ef3a20ccd9982c97703901d29c6f66f +size 26264 diff --git a/detail_png/Shaft_04324_length.png b/detail_png/Shaft_04324_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7d76e7df6be28c9947a979e0d28dd38ab00276d --- /dev/null +++ b/detail_png/Shaft_04324_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbb7c81a1957250a8ee5dc2abac246f48e3b4c403ac41fd9889138ccb609c95e +size 37133 diff --git a/detail_png/Shaft_04324_title.png b/detail_png/Shaft_04324_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bcad9eff5bf94cb34bf5bab93f4be4d8d6ad1e2e --- /dev/null +++ b/detail_png/Shaft_04324_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57403bb5823bc0f4ea6debebc4ba3d3490b264a8c5aa8531d8ad2f51e5557b15 +size 35349 diff --git a/detail_png/Shaft_04331_diam.png b/detail_png/Shaft_04331_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0546ca0ef67b0e3cdf23be118ddb208807568971 --- /dev/null +++ b/detail_png/Shaft_04331_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0981c333ba482c41c1817707364acc1b24d13e38826293ed2da03b07a371e3f +size 19153 diff --git a/detail_png/Shaft_04331_length.png b/detail_png/Shaft_04331_length.png new file mode 100644 index 0000000000000000000000000000000000000000..45b1e0bb81483775d748cde8b193e0cff814c89e --- /dev/null +++ b/detail_png/Shaft_04331_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4863636809ca21997b3a0bbfb921ac0a8112310c7ce3f414381373e5e335964 +size 18933 diff --git a/detail_png/Shaft_04331_title.png b/detail_png/Shaft_04331_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d4f263fda0425da5f67bfab7ce43be54cb575f1b --- /dev/null +++ b/detail_png/Shaft_04331_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48bcb41b9b5b7ac1ce9543be6fe0c58d6d04db43f4a4686b0a7128ff24622978 +size 26174 diff --git a/detail_png/Shaft_04335_diam.png b/detail_png/Shaft_04335_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..873636d3dcc86943242467c02ee0c7eb290e6570 --- /dev/null +++ b/detail_png/Shaft_04335_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89092a4680e29df2ecd622da72adf3cd6c9123de72882ebc9e0e9e07db9d9fa9 +size 23447 diff --git a/detail_png/Shaft_04335_length.png b/detail_png/Shaft_04335_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fb79c690098ef8a26c3df54f55d04e21cf6d5479 --- /dev/null +++ b/detail_png/Shaft_04335_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5aa0a15ee7cb14cc1c4884d81a83e3d97a0f1e07e85d7a8f4098d774f7c9f560 +size 28351 diff --git a/detail_png/Shaft_04335_title.png b/detail_png/Shaft_04335_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d7515fb7df306de61062f33ff728d2fa952b7d90 --- /dev/null +++ b/detail_png/Shaft_04335_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d4d70693444e4fc0d127d75f74c301e8428c61913e7cf2098e345bcb76cf8b3 +size 35723 diff --git a/detail_png/Shaft_04348_diam.png b/detail_png/Shaft_04348_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5f38050d43a1db2a0fbf9b2987adb040971300e2 --- /dev/null +++ b/detail_png/Shaft_04348_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4323962ddb08b51fdba14b53c4f89ff733f4c8c6f4a2ea569d3958d4facdc08d +size 29497 diff --git a/detail_png/Shaft_04348_length.png b/detail_png/Shaft_04348_length.png new file mode 100644 index 0000000000000000000000000000000000000000..37223ec305802671ca65e5eb59a6aab1803332da --- /dev/null +++ b/detail_png/Shaft_04348_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49c440e350246c7c8efc93909c5daa7ca0af49f121534d51ce20dff6f652140e +size 24260 diff --git a/detail_png/Shaft_04348_title.png b/detail_png/Shaft_04348_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dcf9d40df865d90d623a364a3c2aef2afe43d864 --- /dev/null +++ b/detail_png/Shaft_04348_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7531defa1f73273a62c490f2ffe0a4d294351e732b532df536559de22f7e040e +size 20037 diff --git a/detail_png/Shaft_04350_diam.png b/detail_png/Shaft_04350_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fe14032ee7bae5053d4c869e8cc1a3ab7b4e0167 --- /dev/null +++ b/detail_png/Shaft_04350_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3abd68f2bd6cd1ae39b3644fa7cd699cd163ed2d5ebc68bdcd57255fc654fb48 +size 20829 diff --git a/detail_png/Shaft_04350_length.png b/detail_png/Shaft_04350_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e72196e7f7f49af10f4e8dd69f5d0d3e783542fe --- /dev/null +++ b/detail_png/Shaft_04350_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98bb555c08d15ef816691996ad0bd6624cc34dceef2e6f0bcc904cd8d12a4c4f +size 21490 diff --git a/detail_png/Shaft_04350_title.png b/detail_png/Shaft_04350_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b1f7bf8ec3fab93aa13f53bcc1c855af6b8b0bc1 --- /dev/null +++ b/detail_png/Shaft_04350_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2cfbea5bf93cb020e63382251e5cf7a2d73c49124891e7ae032e575fbf4595e +size 26487 diff --git a/detail_png/Shaft_04355_diam.png b/detail_png/Shaft_04355_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..23f98322f88505ba273948f5c828bb4811ae2d0c --- /dev/null +++ b/detail_png/Shaft_04355_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:713b8cd60e57a62da4ab8a438f31a0a51d3c26d2cfcf41c70038a5fa15ee7bf9 +size 33538 diff --git a/detail_png/Shaft_04355_length.png b/detail_png/Shaft_04355_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6e31ab80c22bd819838a8a7efb5b9c286fad2a30 --- /dev/null +++ b/detail_png/Shaft_04355_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e144f32ff8d5e3cdb7404d90eb83233dc674c31104f5900fba11d010ffb92f3 +size 51466 diff --git a/detail_png/Shaft_04355_title.png b/detail_png/Shaft_04355_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d9fed358f2a9e8ed256d874764bb4048c7141e35 --- /dev/null +++ b/detail_png/Shaft_04355_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8011d9eb3f6d3b12685c3daa194655560caf8b1a790dcabb2d34a209dccd2d1f +size 30288 diff --git a/detail_png/Shaft_04359_diam.png b/detail_png/Shaft_04359_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..543a6e084bb90069a2104a2a1ee237f4039fb37c --- /dev/null +++ b/detail_png/Shaft_04359_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ed5ff7bac63f7e1c1e301c4af48aae83ae0e26faf412227e8c039ab883c96cb +size 30561 diff --git a/detail_png/Shaft_04359_length.png b/detail_png/Shaft_04359_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2de1e183efab01f389f013a8450171ddbdaf074a --- /dev/null +++ b/detail_png/Shaft_04359_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a53382329bdbf18b024d3031c828c96251dde0138b2126a0a51a7ddf395ead8 +size 30330 diff --git a/detail_png/Shaft_04359_title.png b/detail_png/Shaft_04359_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b4fe511b669e150ff1411ccf2813dcc2eefce528 --- /dev/null +++ b/detail_png/Shaft_04359_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd610b61b233421bccb9384dbb04686019b6f8aaf5e57a19541f0ba9de13e74a +size 32409 diff --git a/detail_png/Shaft_04361_diam.png b/detail_png/Shaft_04361_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..43dc73fc1a940ea64abb0ab310f9192e2c5fc5a6 --- /dev/null +++ b/detail_png/Shaft_04361_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47ca6da73989300a04107d222a9181c1cd7f222a1ebaf4759b15682cdb0d3e00 +size 25146 diff --git a/detail_png/Shaft_04361_length.png b/detail_png/Shaft_04361_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e2286207a8469c4d747557aa3d173872d912b127 --- /dev/null +++ b/detail_png/Shaft_04361_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e4cb14aec88751ce96df73f03714323758ca5ed3282f1bad2bf3f89b5221574 +size 25723 diff --git a/detail_png/Shaft_04361_title.png b/detail_png/Shaft_04361_title.png new file mode 100644 index 0000000000000000000000000000000000000000..552957e715079734ce39c44e28720e945501117e --- /dev/null +++ b/detail_png/Shaft_04361_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9cbcb30cc3ec074679572da0ff3b7799b1009f58262856075817ecc22804029 +size 31667 diff --git a/detail_png/Shaft_04362_diam.png b/detail_png/Shaft_04362_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..604830e55610e7cfc6814657a2ca64e36347c367 --- /dev/null +++ b/detail_png/Shaft_04362_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4c42247dd5bef151cee2b6dd99354fa9f949d4dd6adaaa21bc565635ba06f52 +size 35009 diff --git a/detail_png/Shaft_04362_length.png b/detail_png/Shaft_04362_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cccd5b8abed7ab934795e1ac491d4bdff2ac1610 --- /dev/null +++ b/detail_png/Shaft_04362_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db1c936d79262ada6e33a6278c710390c36d6a121ddd75e4b98a7259d2330c4d +size 46886 diff --git a/detail_png/Shaft_04362_title.png b/detail_png/Shaft_04362_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3cfa274487a6350243cca27cbead544354b9a0ec --- /dev/null +++ b/detail_png/Shaft_04362_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbbed653f43e34e150022f667fd3ab347956ec37ef07d7aa073bf67004487219 +size 29989 diff --git a/detail_png/Shaft_04363_diam.png b/detail_png/Shaft_04363_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..393088035ecf78429094fe698406487c26c361d4 --- /dev/null +++ b/detail_png/Shaft_04363_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:336d343dd9703f89f789f86ffc4d488d5b6f81020963cd5a8fdd4d83cf13a83a +size 14150 diff --git a/detail_png/Shaft_04363_length.png b/detail_png/Shaft_04363_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0aa95fb7feec6aa263066ee02db639e57b8ea421 --- /dev/null +++ b/detail_png/Shaft_04363_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ca904029238c692a511e82323cb2b84853a2616497845fd8faa7f5d5185d7be +size 18053 diff --git a/detail_png/Shaft_04363_title.png b/detail_png/Shaft_04363_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0278cc5c583f0a432264fa5f7f2a9c936b584510 --- /dev/null +++ b/detail_png/Shaft_04363_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ef68bbe866f74d966b236ad6a5bfd188cd1121852a26a62a8bbfe8911cf8881 +size 30562 diff --git a/detail_png/Shaft_04368_diam.png b/detail_png/Shaft_04368_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e30cceb603cd16535afcc6c6a24c3f4fcb53074e --- /dev/null +++ b/detail_png/Shaft_04368_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aad68df6e5284abea4c0a6f3bb3330e33bf33b741a588839db73ec54846ef98b +size 19207 diff --git a/detail_png/Shaft_04368_length.png b/detail_png/Shaft_04368_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e6f80d0b59bf9d862f6928db7216394529d8230e --- /dev/null +++ b/detail_png/Shaft_04368_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7e38e467c1dcffa0d6c83818b117df2a8012bca15d3d8f30808b3118078c3c0 +size 13744 diff --git a/detail_png/Shaft_04368_title.png b/detail_png/Shaft_04368_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b99426b0ae09c11d02c5574cc93763eb3f2989a0 --- /dev/null +++ b/detail_png/Shaft_04368_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54717431b33f2bb1a33d4c8e52d252afa6b3d6dc3575372d2b12d78dfce520d5 +size 20987 diff --git a/detail_png/Shaft_04372_diam.png b/detail_png/Shaft_04372_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..75361dab6ce2544cf04fce478a5b3abb2a6af94c --- /dev/null +++ b/detail_png/Shaft_04372_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95f47768f6c0259a669eb7745ca370188a96a6ecbf41ba265d884405f9f98f13 +size 25260 diff --git a/detail_png/Shaft_04372_length.png b/detail_png/Shaft_04372_length.png new file mode 100644 index 0000000000000000000000000000000000000000..59c12998d2c4abe9a3dce9bc319c88ea50bd09aa --- /dev/null +++ b/detail_png/Shaft_04372_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:744d1c86db2f55bfb1b30f9497659d01559e31de879fceb04dda44858ac17d48 +size 32259 diff --git a/detail_png/Shaft_04372_title.png b/detail_png/Shaft_04372_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c5a7a14867268bf546ef5583b764dec3745f7c8f --- /dev/null +++ b/detail_png/Shaft_04372_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f4724e2d4e13dd24c5fa87eeef8a5eefeda60948094e1ec61bd0585957977c9 +size 28893 diff --git a/detail_png/Shaft_04374_diam.png b/detail_png/Shaft_04374_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7883cc988fe04be210b666e6889528b010f6c3db --- /dev/null +++ b/detail_png/Shaft_04374_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f90b3c2986d3b627ccc4ef65792c792c67363c827373f46fa9205004ab98446 +size 26230 diff --git a/detail_png/Shaft_04374_length.png b/detail_png/Shaft_04374_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bc824646e01ffe6547320c30a911078859960c41 --- /dev/null +++ b/detail_png/Shaft_04374_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd1ab2ec3b28640d996095f411197fc7c0eb21ad6bb99d8f9c09adadfed17463 +size 29684 diff --git a/detail_png/Shaft_04374_title.png b/detail_png/Shaft_04374_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e565d0d5dbf7d59050bd85913b89e741d79dcb08 --- /dev/null +++ b/detail_png/Shaft_04374_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82acb389cfcfe5a8aa85fa6585e28d37b9158c0e1a128e1f5c3303d54c1e3ffc +size 28001 diff --git a/detail_png/Shaft_04379_diam.png b/detail_png/Shaft_04379_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..70bda666b3d8f2734faee5f4b239c1538900a821 --- /dev/null +++ b/detail_png/Shaft_04379_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b771e1271e9f53a4030173e0a21a9305263427579e41ca861c142472d9326747 +size 20399 diff --git a/detail_png/Shaft_04379_length.png b/detail_png/Shaft_04379_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7c01fdde94326daf3e2846a48e90106e99e3f747 --- /dev/null +++ b/detail_png/Shaft_04379_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe94a5f98749c12051698acb34cf2fbbca10c8ffc6ba154873f3ea2dcd7a9a40 +size 20795 diff --git a/detail_png/Shaft_04379_title.png b/detail_png/Shaft_04379_title.png new file mode 100644 index 0000000000000000000000000000000000000000..305469e49d052e1506b5a7f3d4dfa255dd9b5315 --- /dev/null +++ b/detail_png/Shaft_04379_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29f809be324063e5cef688ea09db866c9673028bda1269d6d2da7a95d01cc36b +size 30520 diff --git a/detail_png/Shaft_04384_diam.png b/detail_png/Shaft_04384_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94c34d75b626a797af113af2c89332198e308eda --- /dev/null +++ b/detail_png/Shaft_04384_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f3b83f1cb3904ebbf0c0e254efba66c45e78e1414f1afa6ed903955557350dc +size 24529 diff --git a/detail_png/Shaft_04384_length.png b/detail_png/Shaft_04384_length.png new file mode 100644 index 0000000000000000000000000000000000000000..13dc2177520313ed41d008f06b7d86aa3beade25 --- /dev/null +++ b/detail_png/Shaft_04384_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0867541e37083c1e12769c8de162c7fc6fbb98b1b145c0589b223e92a9968587 +size 33579 diff --git a/detail_png/Shaft_04384_title.png b/detail_png/Shaft_04384_title.png new file mode 100644 index 0000000000000000000000000000000000000000..57ce495f2a006ba441d755d76199377b0cc06841 --- /dev/null +++ b/detail_png/Shaft_04384_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95e1dff3165b571dbf6a7da448e96cf65870354f33736e6e7935da05577fe261 +size 32248 diff --git a/detail_png/Shaft_04385_diam.png b/detail_png/Shaft_04385_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2ef3351cc3e69433da3e0f506f929f91185bf9db --- /dev/null +++ b/detail_png/Shaft_04385_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:419f542b1fc8a360c378040b97f94a21383556ed5cd936c484ad78ee21f03377 +size 23568 diff --git a/detail_png/Shaft_04385_length.png b/detail_png/Shaft_04385_length.png new file mode 100644 index 0000000000000000000000000000000000000000..110df94a4d5963a6f0eaf0bb6894532d1a4d620f --- /dev/null +++ b/detail_png/Shaft_04385_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d517e747e23950ebec5362670bea1979c80caaa9fbe5b5b12468ed5e3f88a1f0 +size 21029 diff --git a/detail_png/Shaft_04385_title.png b/detail_png/Shaft_04385_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a680d7bbec4c38c205a9deabf026d97a0144babe --- /dev/null +++ b/detail_png/Shaft_04385_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ea799ed983d139ef20a5e59e1997b39cd89cea3b165aabd4933d64340af0bf2 +size 22565 diff --git a/detail_png/Shaft_04388_diam.png b/detail_png/Shaft_04388_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2f44ede70a4ccb65fb8d059d3d86b5dc44376130 --- /dev/null +++ b/detail_png/Shaft_04388_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58bd36c9a7464f62443a05430355c83364b06c1389430c54ed984d7e68037c1c +size 24806 diff --git a/detail_png/Shaft_04388_length.png b/detail_png/Shaft_04388_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b93781b15ca54c756246993a3da2c66103371725 --- /dev/null +++ b/detail_png/Shaft_04388_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:633a06f8935990ed3ab25de0ef07e85597e6348ab9c453b5c85f26c81313fbe8 +size 22087 diff --git a/detail_png/Shaft_04388_title.png b/detail_png/Shaft_04388_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2f272fdbebc43b714da3ce8ae31e41e7c1b7ff28 --- /dev/null +++ b/detail_png/Shaft_04388_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:220a9b226fbc86c38a71b7437f231ecdc52c1731b4a48c75ba809bc8bae0c104 +size 26937 diff --git a/detail_png/Shaft_04390_diam.png b/detail_png/Shaft_04390_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..11759d0e4ee93a8bee4fcce00228cfb45e372dee --- /dev/null +++ b/detail_png/Shaft_04390_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20a475341c333919d8104a9bbd8e9e045df3ce3cae2631775df38f43c1cdb673 +size 29664 diff --git a/detail_png/Shaft_04390_length.png b/detail_png/Shaft_04390_length.png new file mode 100644 index 0000000000000000000000000000000000000000..64336d22e4eb5450ff1b69a8ff1c441caf20e1eb --- /dev/null +++ b/detail_png/Shaft_04390_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53c768c2776a975fa1791c2baf873ef8409625433399732aa83b4d6a87a795b4 +size 22760 diff --git a/detail_png/Shaft_04390_title.png b/detail_png/Shaft_04390_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f2d21edf1d9fd550746c0e5eac80bcc2a77bd69b --- /dev/null +++ b/detail_png/Shaft_04390_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e19e8ed4594fbbff14afe0b4510667e3a234f327b793d42f90cac7099ecc3cb4 +size 19418 diff --git a/detail_png/Shaft_04391_diam.png b/detail_png/Shaft_04391_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..84c04d982d584702b5b0b385657f97caba6b8d94 --- /dev/null +++ b/detail_png/Shaft_04391_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa7f3510ee0d7b1b5cf69b1909797980b47ee3c303a9a287a924c4628807e828 +size 35576 diff --git a/detail_png/Shaft_04391_length.png b/detail_png/Shaft_04391_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e6e3fd13cdeb60b9afd1f84fa5deac8596e45ae --- /dev/null +++ b/detail_png/Shaft_04391_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:924ca891d96bc6f942f34d6e818350249ef73af6eddb7ff24e4001d6a6a3322b +size 39634 diff --git a/detail_png/Shaft_04391_title.png b/detail_png/Shaft_04391_title.png new file mode 100644 index 0000000000000000000000000000000000000000..272ce09bb604441d1a4194b0502e45505f669591 --- /dev/null +++ b/detail_png/Shaft_04391_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8223ab16c783d57de95bf03d002c915a73dcaba6aef4054e3a26a7ac480bff1 +size 28561 diff --git a/detail_png/Shaft_04392_diam.png b/detail_png/Shaft_04392_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..36e31fe783ddf3f6217dd428e0f301fb46e0510d --- /dev/null +++ b/detail_png/Shaft_04392_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68a905fb002c3aa7fc7f60627a00f5080ed108de6256f1b284c7f8e47640b1de +size 25961 diff --git a/detail_png/Shaft_04392_length.png b/detail_png/Shaft_04392_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9672ad185fc8fdd958a51aa79966703d027cd6ff --- /dev/null +++ b/detail_png/Shaft_04392_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:742b09248907b4b4aefe549f80c1de9da22ba9b61c02e8cded2d15533306e59f +size 28484 diff --git a/detail_png/Shaft_04392_title.png b/detail_png/Shaft_04392_title.png new file mode 100644 index 0000000000000000000000000000000000000000..850ebed2311bc5a51466ec3e108566025dd2bb91 --- /dev/null +++ b/detail_png/Shaft_04392_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46eae5e58340684b148a79172670fea68dc28a765fee73b492b1ba91c446713b +size 30164 diff --git a/detail_png/Shaft_04394_diam.png b/detail_png/Shaft_04394_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8eac52c07c6835ab4a3f621f6161c5b174a2151c --- /dev/null +++ b/detail_png/Shaft_04394_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2705d01ec0899675f398f9721c6334081b049d103dd23d2052ea6e4bc10b57c +size 31224 diff --git a/detail_png/Shaft_04394_length.png b/detail_png/Shaft_04394_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bb2f38871fb146efa19e73a73d6d7037779ad119 --- /dev/null +++ b/detail_png/Shaft_04394_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a72cbfebe63c53f4c8a19c75bc9647b2a484582be4f09cdef60f68c9191eb08d +size 42492 diff --git a/detail_png/Shaft_04394_title.png b/detail_png/Shaft_04394_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cc0cc8c2c66c4ae3a89f019014535cdab511a12b --- /dev/null +++ b/detail_png/Shaft_04394_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:083753f315eb25a9c79f91c91291e73cb693b48c1236dd7a0afb15de58437841 +size 29236 diff --git a/detail_png/Shaft_04395_diam.png b/detail_png/Shaft_04395_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3adc4d6cfebfb9b56f3f3e65f2d31d1b792ac485 --- /dev/null +++ b/detail_png/Shaft_04395_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5268f1ee2aa9fe1fc6b0bd3bd5842344d3943c7e5162d053e254e0f50ab946cf +size 38205 diff --git a/detail_png/Shaft_04395_length.png b/detail_png/Shaft_04395_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d4bf7b918d30ecfae45ead74ea9eaa972bf27b23 --- /dev/null +++ b/detail_png/Shaft_04395_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:164568c2f3d90eb22b06acf7641d211e07b72e40e405e86b59f1d16e304ac5d7 +size 31779 diff --git a/detail_png/Shaft_04395_title.png b/detail_png/Shaft_04395_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fd7222717f6fa47416784875653fb875f508e412 --- /dev/null +++ b/detail_png/Shaft_04395_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87bd15c3fa111f6dd8d8f8613c0b6e3c22cf4a54d834e487e8fae1432e40a174 +size 32415 diff --git a/detail_png/Shaft_04396_diam.png b/detail_png/Shaft_04396_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..89da286243f2bf1d10c1ff2a36c6ee5fd17d6eb6 --- /dev/null +++ b/detail_png/Shaft_04396_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:489dd390cac84a633861905379c9d7d12d7c90db5c8f9dc3ddb740f9324b7e54 +size 31171 diff --git a/detail_png/Shaft_04396_length.png b/detail_png/Shaft_04396_length.png new file mode 100644 index 0000000000000000000000000000000000000000..18b90aab3a800f1f5c010e2d24c3eaaffbd3146a --- /dev/null +++ b/detail_png/Shaft_04396_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51e3e0d368094709027f089761dd7f1a4a9f2627d05f457dc211bac09ad3c163 +size 43268 diff --git a/detail_png/Shaft_04396_title.png b/detail_png/Shaft_04396_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bd4896067e54136d9e3badc9b69006e87216127c --- /dev/null +++ b/detail_png/Shaft_04396_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fea5c7593ba797dc6da15138fa48dc74517dbe952d4880e5afe4fd30425567c6 +size 34119 diff --git a/detail_png/Shaft_04399_diam.png b/detail_png/Shaft_04399_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..91cdafb7fba7e9f8fd27d76d498e68bfd38d9843 --- /dev/null +++ b/detail_png/Shaft_04399_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d39acc610b11912ed68f11afe0c93dd52bd892219a6f543864a4067ae738663 +size 20368 diff --git a/detail_png/Shaft_04399_length.png b/detail_png/Shaft_04399_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8f3e3516826686370430fadca79b8450c32370bb --- /dev/null +++ b/detail_png/Shaft_04399_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4e3c21189b757a719de0156c41e6d07900b143ea9f3645f97e884af39037ccd +size 16349 diff --git a/detail_png/Shaft_04399_title.png b/detail_png/Shaft_04399_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2629ae2405b1003ccfe1791da7e846bf3a13a409 --- /dev/null +++ b/detail_png/Shaft_04399_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d2d0338f564debfecd2b76d612c736a23e5faaa4b30de2fb75cb88b8db57555 +size 15451 diff --git a/detail_png/Shaft_04400_diam.png b/detail_png/Shaft_04400_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4761b0b7c09b39e5088f633670646fa11fea8fd9 --- /dev/null +++ b/detail_png/Shaft_04400_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a50553e71918121f08e82bc85cfcb227355a704e1d6f436baee05ac39a434ce +size 19633 diff --git a/detail_png/Shaft_04400_length.png b/detail_png/Shaft_04400_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d6353e2f4b403776245d62c28339812a6e07f867 --- /dev/null +++ b/detail_png/Shaft_04400_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c9a9cd3a9ff3bb8de1e905ffa8c0fdab2627fac6fafe0819b0c1e1af1c3fdf6 +size 15600 diff --git a/detail_png/Shaft_04400_title.png b/detail_png/Shaft_04400_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ffb0e90531407fd526d44823546be6946dd9beae --- /dev/null +++ b/detail_png/Shaft_04400_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12df0e98366767bfb213407b2461618e9738cd64ae68b61564faac79608b1c58 +size 18753 diff --git a/detail_png/Shaft_04411_diam.png b/detail_png/Shaft_04411_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3a5a0338d19250566348f893d8b5b821c48630de --- /dev/null +++ b/detail_png/Shaft_04411_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b38a0d6babe2c0e8497fe62d5f2e4be0bf77c0345e8186005b96df3b9a67b90 +size 29219 diff --git a/detail_png/Shaft_04411_length.png b/detail_png/Shaft_04411_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5636b4e18b8957fa6b478eece643c0d0b9e2f4ae --- /dev/null +++ b/detail_png/Shaft_04411_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad89f088892026a731197d3909abad33c4fa561a912fed43c9a85ad7877b2ca1 +size 34672 diff --git a/detail_png/Shaft_04411_title.png b/detail_png/Shaft_04411_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3495f0d74baec58be08b2658bf12ca9fcc20362b --- /dev/null +++ b/detail_png/Shaft_04411_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7fe473bdc3e815bf9970d34fe4337c2753caa77e40c04e3873bc4cce559595c +size 29857 diff --git a/detail_png/Shaft_04413_diam.png b/detail_png/Shaft_04413_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da126260fd269a0b6f10d94aeea1f0a6658f42cd --- /dev/null +++ b/detail_png/Shaft_04413_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:553ad6192424afa2aee3b1ad9d94438b70179c31409db90de7898a349d15f696 +size 26013 diff --git a/detail_png/Shaft_04413_length.png b/detail_png/Shaft_04413_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cdf0bcc2a86cabdb36392c139081ecd40a4c3281 --- /dev/null +++ b/detail_png/Shaft_04413_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e4b78ba25e2c04564dac1e6049c44a27ba02804cdab86a436f6854182daaa43 +size 22479 diff --git a/detail_png/Shaft_04413_title.png b/detail_png/Shaft_04413_title.png new file mode 100644 index 0000000000000000000000000000000000000000..12998ccb276d5913f0f5c7e381b489626e84c4d6 --- /dev/null +++ b/detail_png/Shaft_04413_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9d499c1b7c55c36431102344dd7a9634706ff150a8a0e734a87fdffbbb58bb2 +size 30256 diff --git a/detail_png/Shaft_04415_diam.png b/detail_png/Shaft_04415_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..18943967c5b96141da4dbf91e244b204c67e7c3b --- /dev/null +++ b/detail_png/Shaft_04415_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b126e618c8b3fe3365c6e46ecd14e125246d6418850841eb735611d7bbdece9c +size 35570 diff --git a/detail_png/Shaft_04415_length.png b/detail_png/Shaft_04415_length.png new file mode 100644 index 0000000000000000000000000000000000000000..94208c0a80802079aa8ab84b092fb7aba912ddae --- /dev/null +++ b/detail_png/Shaft_04415_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:539a3eadb1d02c437e6f12df2bc231b312e3c9a6b1cacf1782c76e6b77d91994 +size 44106 diff --git a/detail_png/Shaft_04415_title.png b/detail_png/Shaft_04415_title.png new file mode 100644 index 0000000000000000000000000000000000000000..69f6e9b675eb718da520eb58d6a427d117eb32d1 --- /dev/null +++ b/detail_png/Shaft_04415_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8b9be61938a45a766d750b2a8d5b6350084928149004eeea297bc2f4046010f +size 28431 diff --git a/detail_png/Shaft_04419_diam.png b/detail_png/Shaft_04419_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..adea878d19a218847d729583197dd8b68ab05f22 --- /dev/null +++ b/detail_png/Shaft_04419_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0045e16b68ed659d71118a87ce60bb1bbcb99040b295b21c38c937944585ac34 +size 26387 diff --git a/detail_png/Shaft_04419_length.png b/detail_png/Shaft_04419_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a519a6cd5753ab40a3bb8112926478932d22c41 --- /dev/null +++ b/detail_png/Shaft_04419_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d519ee9d1f176d1096722a19361b13a7d8152dcc404d30e28d14d01c8e2f30ae +size 31437 diff --git a/detail_png/Shaft_04419_title.png b/detail_png/Shaft_04419_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3d26d0e4fe7121e0ba108a560414e2e64a13b343 --- /dev/null +++ b/detail_png/Shaft_04419_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4508b081a129ae88e8fd45ed71bb3c51da8832638bc668d6e82525027430968 +size 31181 diff --git a/detail_png/Shaft_04421_diam.png b/detail_png/Shaft_04421_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c6973022f26700bc41cf8c24f47802db22b032e0 --- /dev/null +++ b/detail_png/Shaft_04421_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba90f1234cf40f10c16665eec02f3ec6f4b8e538b53cb2a093214fa654ab742e +size 34051 diff --git a/detail_png/Shaft_04421_length.png b/detail_png/Shaft_04421_length.png new file mode 100644 index 0000000000000000000000000000000000000000..df0c7334911d4806177b189c9d4c56852d17bc0c --- /dev/null +++ b/detail_png/Shaft_04421_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1fea38a2eada8353de85ce27b2553f54a7c486647e3ba399db8a2f5ef32e6b7 +size 37440 diff --git a/detail_png/Shaft_04421_title.png b/detail_png/Shaft_04421_title.png new file mode 100644 index 0000000000000000000000000000000000000000..acca829a3b2eb725fa1364e8061be8806d3c8af4 --- /dev/null +++ b/detail_png/Shaft_04421_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9433d34e322993f025dfd908a87edd0d000b95b6a498bbc11a8b71b42da90deb +size 30854 diff --git a/detail_png/Shaft_04425_diam.png b/detail_png/Shaft_04425_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c40dd0212400cee0c69ca16b79f993670b89d075 --- /dev/null +++ b/detail_png/Shaft_04425_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad552232e93268c4ae9ed3bd5488ef35fd93ba40e8206050eafc1751565dbeb5 +size 36331 diff --git a/detail_png/Shaft_04425_length.png b/detail_png/Shaft_04425_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c6cc0fd8c9a968a5915c3269275bd05e5f416a8e --- /dev/null +++ b/detail_png/Shaft_04425_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48fd72598e55b5f8c0f73f76e106801fb4781e2524f2f82697b343b920507bd7 +size 51198 diff --git a/detail_png/Shaft_04425_title.png b/detail_png/Shaft_04425_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9af4b004b9facb2d67e66b70d30cb801f8db82f9 --- /dev/null +++ b/detail_png/Shaft_04425_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bc87fe0afc9d25822b19888f5bfd98c84c2db1b6f32b2c96f49ecc648af5059 +size 29708 diff --git a/detail_png/Shaft_04435_diam.png b/detail_png/Shaft_04435_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ec7bd1c9192a2a6fd40d0b62af24419d26b40190 --- /dev/null +++ b/detail_png/Shaft_04435_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35151a91e19c78614923765d5e216a8f2c9099e1da6fac557c932bd0e7b64db6 +size 25383 diff --git a/detail_png/Shaft_04435_length.png b/detail_png/Shaft_04435_length.png new file mode 100644 index 0000000000000000000000000000000000000000..92b4668bc9260f734c7b88d2f5de54ef31575083 --- /dev/null +++ b/detail_png/Shaft_04435_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbd51067997b426226d0e6191329cf4a77a25dfbb9cbd7412667e5b09f696099 +size 21865 diff --git a/detail_png/Shaft_04435_title.png b/detail_png/Shaft_04435_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2bd3351a1edefa3137327d83262f028961b41236 --- /dev/null +++ b/detail_png/Shaft_04435_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26d50807ba91551cc174c7b927ffa4a0290b89ab79d6aa90ce6201c5f7ec1266 +size 22543 diff --git a/detail_png/Shaft_04438_diam.png b/detail_png/Shaft_04438_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9f372b1479d8e78a27664d1074e3043d64b1ec85 --- /dev/null +++ b/detail_png/Shaft_04438_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6860f58d86ad397777a25ab849e3267fd7e85693f08b1df25aae8b5d14414ceb +size 20380 diff --git a/detail_png/Shaft_04438_length.png b/detail_png/Shaft_04438_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d6a0d9352b5f1463390e609f758c5461a357f677 --- /dev/null +++ b/detail_png/Shaft_04438_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d76d7bea528c00ec644d39c3296c21b3f6a9bba6ae383990d1231b6719471f0d +size 25660 diff --git a/detail_png/Shaft_04438_title.png b/detail_png/Shaft_04438_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5e8446fdcf2cee7f4564aaa99461171bbb5281cd --- /dev/null +++ b/detail_png/Shaft_04438_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1080c9749a2ab6489ead94984e6031d96edfc9e86c20ac03c423a00ec8d0134 +size 31927 diff --git a/detail_png/Shaft_04440_diam.png b/detail_png/Shaft_04440_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0065a6f18029662f0203cec8745a800847dd00df --- /dev/null +++ b/detail_png/Shaft_04440_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a8291ea2e058f4407fb5572468da7bd12f2f21ad4155263654536787765a757 +size 25981 diff --git a/detail_png/Shaft_04440_length.png b/detail_png/Shaft_04440_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5c653ade81778dec106a3146351fb8e70d108f5e --- /dev/null +++ b/detail_png/Shaft_04440_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5860e9f828190fe8fdda04b30afe488060dcafd8e32dfad455448931ac118990 +size 37917 diff --git a/detail_png/Shaft_04440_title.png b/detail_png/Shaft_04440_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ac2a579352794b3dc2a398e21c3f00ee03c13850 --- /dev/null +++ b/detail_png/Shaft_04440_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af3bdf8435a95654f0e2de91f1e8929e5ced2eadeea67a6a9f22af385d97df8c +size 31216 diff --git a/detail_png/Shaft_04443_diam.png b/detail_png/Shaft_04443_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..75e3d2990769b2693ce170d1f48bd3ccf5336ed6 --- /dev/null +++ b/detail_png/Shaft_04443_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0a6c2c04194a16b89004d74b1379561bb70e7e9876263b0b60246eb1e341737 +size 36658 diff --git a/detail_png/Shaft_04443_length.png b/detail_png/Shaft_04443_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0b68020b47122f1b692c65cb6ffc092e12ea846b --- /dev/null +++ b/detail_png/Shaft_04443_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43702b1a1471c03c4ac5240c53a0c3e5b2652fb570e0f3315e8c3f2b7b4d43ab +size 41064 diff --git a/detail_png/Shaft_04443_title.png b/detail_png/Shaft_04443_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4c34aeb3bde8959adf341fa4325d5d83411345e3 --- /dev/null +++ b/detail_png/Shaft_04443_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74f2e0a85a80f0be2cd35ea6197c180d02562033b4ccd364e0b262f004dac97b +size 31012 diff --git a/detail_png/Shaft_04444_diam.png b/detail_png/Shaft_04444_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bcb1b109ae062ee14b9891d074257cc010651cdb --- /dev/null +++ b/detail_png/Shaft_04444_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bd58968df8e0a485a6ec0e67ded83653b4e861f1e219dec071b6ee7b4ba03dd +size 24344 diff --git a/detail_png/Shaft_04444_length.png b/detail_png/Shaft_04444_length.png new file mode 100644 index 0000000000000000000000000000000000000000..e2c4fce5f0d645b56b2b439b28075444e2ead61d --- /dev/null +++ b/detail_png/Shaft_04444_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0422e0f4fbca8df5c03add3bbab0b3fe9a859ca5a718575082e652456b63020 +size 23383 diff --git a/detail_png/Shaft_04444_title.png b/detail_png/Shaft_04444_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6992c3586c11f2d619af2ae331330fe5467c5f9c --- /dev/null +++ b/detail_png/Shaft_04444_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c5679977576df839acf1e35d9d24501ddca9305be1696536d104feed3bfc36a +size 26531 diff --git a/detail_png/Shaft_04447_diam.png b/detail_png/Shaft_04447_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..54e445bb27f1be0975a0baf2f5ab5fae2a839e71 --- /dev/null +++ b/detail_png/Shaft_04447_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7c6cc5a9a3ba63b1142cc3ab1b01a30b19e90b18a04d1663a2cba8f95124174 +size 25452 diff --git a/detail_png/Shaft_04447_length.png b/detail_png/Shaft_04447_length.png new file mode 100644 index 0000000000000000000000000000000000000000..334b12f50b5e9bdc2bf843b7204320ac6f13aa67 --- /dev/null +++ b/detail_png/Shaft_04447_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77c309f4e24bd2e3170a59b5c657919cbf573001cc9c378c4be6022edbb05628 +size 18937 diff --git a/detail_png/Shaft_04447_title.png b/detail_png/Shaft_04447_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6b3482a21a2299712463c30606742e57410a1a3b --- /dev/null +++ b/detail_png/Shaft_04447_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9664106dc141ab3952bf70ac48549acf2ed7cd39c39ccf716bf1b9428b2582f4 +size 16830 diff --git a/detail_png/Shaft_04448_diam.png b/detail_png/Shaft_04448_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cccc1dad1cca6fb395d8a725734cc3b1c8d1e5ba --- /dev/null +++ b/detail_png/Shaft_04448_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39e01aa350e06a855fc7731117d4fd90ecf925fc8f3e138325043924e912ccbb +size 25201 diff --git a/detail_png/Shaft_04448_length.png b/detail_png/Shaft_04448_length.png new file mode 100644 index 0000000000000000000000000000000000000000..65bd2a132d0f13ca2b71d119cb395f5120312a12 --- /dev/null +++ b/detail_png/Shaft_04448_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:badc43625c29662d805d4b4799452f0e8d026156eebbd5827f849237a001c5c3 +size 18558 diff --git a/detail_png/Shaft_04448_title.png b/detail_png/Shaft_04448_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7fc1ed8a5a5ce00fa1ecbe0ee6f9c30733229052 --- /dev/null +++ b/detail_png/Shaft_04448_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07757f48742d5a647c976b80a85a18b7dc5fc045858fb293b1b5e2e5a725a6bf +size 15648 diff --git a/detail_png/Shaft_04449_diam.png b/detail_png/Shaft_04449_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..81221e173adeb154dc1e9ac70721bad91938922e --- /dev/null +++ b/detail_png/Shaft_04449_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cae54acb09d132d413c48412d9558b86964255cab5744e9d82a0028b43b3fb2e +size 26294 diff --git a/detail_png/Shaft_04449_length.png b/detail_png/Shaft_04449_length.png new file mode 100644 index 0000000000000000000000000000000000000000..86c917c2f1b56753a32d0293da0f75ba1ecfaf8b --- /dev/null +++ b/detail_png/Shaft_04449_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89783d55b304a0c5cc34c086e27b3527dfd8573eb4580c9c19422bcc78e78e34 +size 31514 diff --git a/detail_png/Shaft_04449_title.png b/detail_png/Shaft_04449_title.png new file mode 100644 index 0000000000000000000000000000000000000000..56b629af81ff209efc513c7bd01d451f4a1ea87f --- /dev/null +++ b/detail_png/Shaft_04449_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72744d8c5627a535b3bb30f2fabc1485f450e447449646f456245c5c8e6e6664 +size 29039 diff --git a/detail_png/Shaft_04451_diam.png b/detail_png/Shaft_04451_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a98d512c7c259ccdc212f97c3ebd86d93fed18aa --- /dev/null +++ b/detail_png/Shaft_04451_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f68028eedf2047a62410cfa8edff69422a62a60973e97dd3d190fc32089cf161 +size 29865 diff --git a/detail_png/Shaft_04451_length.png b/detail_png/Shaft_04451_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dc228d5357006664de602858248375c55c7f97e9 --- /dev/null +++ b/detail_png/Shaft_04451_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25d73167e6e6ab4772fb4600f314bab1aa9f79233a81b2be55225f33d600d9a9 +size 38509 diff --git a/detail_png/Shaft_04451_title.png b/detail_png/Shaft_04451_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5b185fa9e3f36d1aafbcbb238b5d2384d3b3db3e --- /dev/null +++ b/detail_png/Shaft_04451_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6680c7a0d1e50ee787f570644f673b720d9b25f5ed2c84a6c51495ea6e7fbcb +size 30765 diff --git a/detail_png/Shaft_04452_diam.png b/detail_png/Shaft_04452_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4fe6165e085838c44870e8643114698230d0688d --- /dev/null +++ b/detail_png/Shaft_04452_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c218d2a3a0fe0a975cd642007dbbd250e8297f5b6287c0fe966f543de9de1d7 +size 42464 diff --git a/detail_png/Shaft_04452_length.png b/detail_png/Shaft_04452_length.png new file mode 100644 index 0000000000000000000000000000000000000000..aed41cfd2b1085244f5b33876687150447ed238b --- /dev/null +++ b/detail_png/Shaft_04452_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52a10d2fa3eadc3bb338001b487e556caed242f8e8c866546a2bf58abb19eb22 +size 63353 diff --git a/detail_png/Shaft_04452_title.png b/detail_png/Shaft_04452_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ebcac7d9e1ea259afd7a50ab192d7bfe511b020d --- /dev/null +++ b/detail_png/Shaft_04452_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce685ef29a688cfd9fec3ec861e0e94adb4d1bd2a768f2ca78f8ff78c2bc55c +size 29450 diff --git a/detail_png/Shaft_04457_diam.png b/detail_png/Shaft_04457_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4e8dce0330ff94429ed99f2ff785a3df2259c424 --- /dev/null +++ b/detail_png/Shaft_04457_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9da40aac1c9b2a55898bc5130f589e29be65227135eb96a83031a84edbaf0b58 +size 27995 diff --git a/detail_png/Shaft_04457_length.png b/detail_png/Shaft_04457_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3a6e7ac732d5ce507dec4fdb5ed6dacd7f9fcb62 --- /dev/null +++ b/detail_png/Shaft_04457_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de06941d10ab002826b717ce67de09f44d1ac0cc8f65fff3a615c32b0b8e0053 +size 33744 diff --git a/detail_png/Shaft_04457_title.png b/detail_png/Shaft_04457_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3553ae976628f9fce3b7ccf1778fbe52b185a012 --- /dev/null +++ b/detail_png/Shaft_04457_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b462bee3aa575e26fd9e0cd2e719bd1f20501787d4753412f4674a6beda0d1fb +size 28560 diff --git a/detail_png/Shaft_04458_diam.png b/detail_png/Shaft_04458_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..829b9390f7b8d01e41c471e66ad19cfd5bee57fc --- /dev/null +++ b/detail_png/Shaft_04458_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca86813d4579c138df2bad3aeb56d40ef91b5003e54265646570ce25787123e3 +size 30131 diff --git a/detail_png/Shaft_04458_length.png b/detail_png/Shaft_04458_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3d7efc6e60db48aeade77abdff39e2d45ca7809b --- /dev/null +++ b/detail_png/Shaft_04458_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c591f4e06ecc532d0340c7833c13a3cd2b9e9d5b43d0aec841fa02f664b059eb +size 33519 diff --git a/detail_png/Shaft_04458_title.png b/detail_png/Shaft_04458_title.png new file mode 100644 index 0000000000000000000000000000000000000000..abb21d012793fff185153a2dee307cba4c37f6ef --- /dev/null +++ b/detail_png/Shaft_04458_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de24b45f89aca577b437f0bca264a6317fbddbbf963a18b2601d850f0eb651f6 +size 31882 diff --git a/detail_png/Shaft_04459_diam.png b/detail_png/Shaft_04459_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3093c301ed2dd7e1927c49fb1f9e7f87817533e0 --- /dev/null +++ b/detail_png/Shaft_04459_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23a6aa3b05f92bf923c20470bb9e82dc27bb344662cb21faf4d51c77f9c4d90d +size 20491 diff --git a/detail_png/Shaft_04459_length.png b/detail_png/Shaft_04459_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d6ffc64141f5b4ba78d6f888634b0827d4ab67b1 --- /dev/null +++ b/detail_png/Shaft_04459_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:412fe9ed17ffc7181e1f04690ac40d9a089a521102a31f29df6a9cce31d7117c +size 14645 diff --git a/detail_png/Shaft_04459_title.png b/detail_png/Shaft_04459_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3f3216eafb0d858dcff2e3cc2d982614470a4110 --- /dev/null +++ b/detail_png/Shaft_04459_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5fb19991a46c57f794cf3c08afde1020e7261a9fcdb19697d84f60915f4276f +size 18832 diff --git a/detail_png/Shaft_04464_diam.png b/detail_png/Shaft_04464_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8a9acd142056182cb156382f20e61e539cb60521 --- /dev/null +++ b/detail_png/Shaft_04464_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bec790b681275dec5efdc8a55d1f6722ce0d240f3a8d8b67bf3d43a6dbd3c77 +size 19934 diff --git a/detail_png/Shaft_04464_length.png b/detail_png/Shaft_04464_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ac9c0dcd9f035d32222f207947d11812ad5ec61e --- /dev/null +++ b/detail_png/Shaft_04464_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6982fc0782cba94d409159fff7ad228cfc5647ef1dae9ef4ec10b40500a3a59d +size 17878 diff --git a/detail_png/Shaft_04464_title.png b/detail_png/Shaft_04464_title.png new file mode 100644 index 0000000000000000000000000000000000000000..54c45572ed15262377c2d12b6b1c1a9087aac860 --- /dev/null +++ b/detail_png/Shaft_04464_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0a462b209c26fb02eefba819b6e22975e080ec9f704a92023f0d87886b4d248 +size 19955 diff --git a/detail_png/Shaft_04468_diam.png b/detail_png/Shaft_04468_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..129e64959ef81afc530f7316b076e7ffbe623337 --- /dev/null +++ b/detail_png/Shaft_04468_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02d6ce5de44cb99a7812cffdcc395dd02a2c154ef3a2898872183cebf6bbc83f +size 26848 diff --git a/detail_png/Shaft_04468_length.png b/detail_png/Shaft_04468_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6b3d964deabb0678ecbc859c58e53c717f22482b --- /dev/null +++ b/detail_png/Shaft_04468_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1022ffd56a2c5cb9aa67904044e35bfa166af2f6d1d1f328a829b0388313c5be +size 36314 diff --git a/detail_png/Shaft_04468_title.png b/detail_png/Shaft_04468_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ab4e9d95e665fd30c3e21c6869313bd72d453ea --- /dev/null +++ b/detail_png/Shaft_04468_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b145d6d0dcb5dee10c7afc87beda627f208f09cf6f183aa3ea33e016a303fea +size 29426 diff --git a/detail_png/Shaft_04469_diam.png b/detail_png/Shaft_04469_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8853cc7a9867f1fb472df3aeae07b2f3044443e0 --- /dev/null +++ b/detail_png/Shaft_04469_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b7192e46c0fe43bc90222a39a3850c3926dbc61c13b6d59c9ab0f540ac81cd0 +size 35444 diff --git a/detail_png/Shaft_04469_length.png b/detail_png/Shaft_04469_length.png new file mode 100644 index 0000000000000000000000000000000000000000..95a5ac284d63580cac5ba432c56d64ff4d474fba --- /dev/null +++ b/detail_png/Shaft_04469_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32d53175a6c3e81858930c0dabd7ab2b88a6def41918fab47a43a62d3ede407c +size 33691 diff --git a/detail_png/Shaft_04469_title.png b/detail_png/Shaft_04469_title.png new file mode 100644 index 0000000000000000000000000000000000000000..be62831e661498b12de498edcffb2b5a25573df5 --- /dev/null +++ b/detail_png/Shaft_04469_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:530605bd81e228bb82ccc72c01f2ed63cdf6f50457960352c4ae8e3fd2139d69 +size 35178 diff --git a/detail_png/Shaft_04475_diam.png b/detail_png/Shaft_04475_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..22df7bf8e6047defcc9b56d9b6b5003e26ef4e7a --- /dev/null +++ b/detail_png/Shaft_04475_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e57dfac51afc0876665daf6476f1fe06d66164f53cd05b04c8705a8c97639de7 +size 20415 diff --git a/detail_png/Shaft_04475_length.png b/detail_png/Shaft_04475_length.png new file mode 100644 index 0000000000000000000000000000000000000000..073c224150c9ca4dfd0b187b37a117768204601b --- /dev/null +++ b/detail_png/Shaft_04475_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05000ae7be7d40ce320044e6b6918487e132535a7ecc64a4f0658ef35dc185f1 +size 16886 diff --git a/detail_png/Shaft_04475_title.png b/detail_png/Shaft_04475_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8ce1ae57431e7c08126b5e49472af678db4980df --- /dev/null +++ b/detail_png/Shaft_04475_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd4297cdc87545787d79bd955fbb49829e4914e8cdb57e2b0f5739cf0d406442 +size 18831 diff --git a/detail_png/Shaft_04478_diam.png b/detail_png/Shaft_04478_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..abde1fc1e2ea0e7303e2ed3cdee1b0fba3398259 --- /dev/null +++ b/detail_png/Shaft_04478_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58adc83bee3a61ea33a68e6bca0701edeb88db80b51b96414f9afe2631c0a74a +size 33465 diff --git a/detail_png/Shaft_04478_length.png b/detail_png/Shaft_04478_length.png new file mode 100644 index 0000000000000000000000000000000000000000..07b483875726576e9f70d1eb807e2f11ec165e41 --- /dev/null +++ b/detail_png/Shaft_04478_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b76aa8fce3341871808a9b6b44c7f620d07f0c1264c91fceaca220a779663cac +size 45202 diff --git a/detail_png/Shaft_04478_title.png b/detail_png/Shaft_04478_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2138d1b0ba124f71e535f61b57d177777677ac60 --- /dev/null +++ b/detail_png/Shaft_04478_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1ac7cd9182de3bdf704cb6909417fb1dad78781a081d0577ef25467a0223d0e +size 35273 diff --git a/detail_png/Shaft_04482_diam.png b/detail_png/Shaft_04482_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..29f70001d1b2faf9c4d854dc90609d9190f71d06 --- /dev/null +++ b/detail_png/Shaft_04482_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79d555cd3af85203c643624cbacdedabdc5b6c7bbcd0c66b8ab7e7ab301bc15d +size 18007 diff --git a/detail_png/Shaft_04482_length.png b/detail_png/Shaft_04482_length.png new file mode 100644 index 0000000000000000000000000000000000000000..746e767173c17b3b79d3834b0d5ddbefb54bcf80 --- /dev/null +++ b/detail_png/Shaft_04482_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82f54455088f28b622bbfb0dc437168f01925ea171ec3baba009d9001f344e55 +size 14239 diff --git a/detail_png/Shaft_04482_title.png b/detail_png/Shaft_04482_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e5c13892fbe9a34f4e994e3ec89ae48f7c513a60 --- /dev/null +++ b/detail_png/Shaft_04482_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e71af5aad89d9fc7ebd0905680f3292a1dbb9dce2cd59fa09dceb9882d596c71 +size 15088 diff --git a/detail_png/Shaft_04484_diam.png b/detail_png/Shaft_04484_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a55a8b3614ae89b76beb786b69a9b919799ce8fe --- /dev/null +++ b/detail_png/Shaft_04484_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbaf261e9c38bd01640c02457f098f826d213d78a0b7a487ce53810fb5724994 +size 19433 diff --git a/detail_png/Shaft_04484_length.png b/detail_png/Shaft_04484_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f1ee64cb17b52029d82ead7605c97db74b516106 --- /dev/null +++ b/detail_png/Shaft_04484_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f400feac5b919ecf649a8d583e67e463b153f7866fddf8c8f4001dbb660238d +size 14513 diff --git a/detail_png/Shaft_04484_title.png b/detail_png/Shaft_04484_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b2353c7c198ffe3e9b104a7b0b7000b26da91b1c --- /dev/null +++ b/detail_png/Shaft_04484_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab4d0caebad8752e4aa9666823e8786160f5c7730943a6aae82c8af363bff632 +size 18509 diff --git a/detail_png/Shaft_04485_diam.png b/detail_png/Shaft_04485_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ffaa549de2db1eaee79b579965363cd3999be476 --- /dev/null +++ b/detail_png/Shaft_04485_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65dacd57fad34c156eef18e4d3ea0cb1e6c7d141096c6b4930602e8d359f6e45 +size 19204 diff --git a/detail_png/Shaft_04485_length.png b/detail_png/Shaft_04485_length.png new file mode 100644 index 0000000000000000000000000000000000000000..273fa840a219519434c909f6ef031267f30d6d19 --- /dev/null +++ b/detail_png/Shaft_04485_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c16524bb07cd3425674e998c297c454a0a17f0ba5848e76d57b5c48517643746 +size 16083 diff --git a/detail_png/Shaft_04485_title.png b/detail_png/Shaft_04485_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d842a2dcadd6df6662b1986822001a5cbfa4f299 --- /dev/null +++ b/detail_png/Shaft_04485_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38e9d57bfbb026bba754b24dc7e86f0b68d4c02d95e9ebba9036967e30783809 +size 13412 diff --git a/detail_png/Shaft_04488_diam.png b/detail_png/Shaft_04488_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b110fd03575e3a08c0f41b3da8ffe7abfb41cd01 --- /dev/null +++ b/detail_png/Shaft_04488_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8426d2c4159c0926fe59f73237d55eaa4cd7cd69e065dcc0e530eee16fa15efe +size 24247 diff --git a/detail_png/Shaft_04488_length.png b/detail_png/Shaft_04488_length.png new file mode 100644 index 0000000000000000000000000000000000000000..304917412bdea2c9a6451395afffb74e34f1a1f5 --- /dev/null +++ b/detail_png/Shaft_04488_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ec43e21a7eb9b1135e62192b904365a271c490eed6ad7e634173ac848608dd9 +size 24260 diff --git a/detail_png/Shaft_04488_title.png b/detail_png/Shaft_04488_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0212fbd87ea7563accd1fa81c55f5629267a572c --- /dev/null +++ b/detail_png/Shaft_04488_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a0a0e72d6c34dad1626569b23d4fa755b401145d71e4d7612d4c2fd63f7515c +size 29038 diff --git a/detail_png/Shaft_04492_diam.png b/detail_png/Shaft_04492_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7d361d5acb839c587aa676d4f297c27d59d167fe --- /dev/null +++ b/detail_png/Shaft_04492_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:485d2246bb91e74b0cc62d5074a8c00afc53be8679afd23ad430b90aefbc80e7 +size 19229 diff --git a/detail_png/Shaft_04492_length.png b/detail_png/Shaft_04492_length.png new file mode 100644 index 0000000000000000000000000000000000000000..219b1623226bc5c9debe60569df6c635feaa7092 --- /dev/null +++ b/detail_png/Shaft_04492_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a7c6eee082a1805be2846f8cb807a9dc6a26c4d1a644ccfd941c22ff9186efd +size 12162 diff --git a/detail_png/Shaft_04492_title.png b/detail_png/Shaft_04492_title.png new file mode 100644 index 0000000000000000000000000000000000000000..81b60420d0fcf3999e12c2e15c881f1bd828e212 --- /dev/null +++ b/detail_png/Shaft_04492_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3750b74cf8c60bebbb4b2024d753237c90b013677805c84811cd560b610f628e +size 15414 diff --git a/detail_png/Shaft_04493_diam.png b/detail_png/Shaft_04493_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..724878839dbcd939c6f78faac045a30fe6e5799a --- /dev/null +++ b/detail_png/Shaft_04493_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c3311f62f284a83dbd08e3865f40d112f5caab5f32cb9c20713edc60c74bf1f +size 25523 diff --git a/detail_png/Shaft_04493_length.png b/detail_png/Shaft_04493_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8a7706c1e1caba298fe1ee0c272d207d9a4fa747 --- /dev/null +++ b/detail_png/Shaft_04493_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fceffca4af147b23a4eb3aec4731fe3dc4a4a03cfcdf69e09279ed1e6f83f5d +size 35997 diff --git a/detail_png/Shaft_04493_title.png b/detail_png/Shaft_04493_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f333f1e6c77374c4ec198f9989ba930ad6fb69e6 --- /dev/null +++ b/detail_png/Shaft_04493_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76d340f2e0b8dd2ac9a69ebd0d4ab14f69a85da093269b15f1728b1e60a24d40 +size 29385 diff --git a/detail_png/Shaft_04494_diam.png b/detail_png/Shaft_04494_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2c769b8a963662000f94cda3455321de8e5ece14 --- /dev/null +++ b/detail_png/Shaft_04494_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13b94f3e5620182d47feff7486b8d203d63f62582f2ae76cbb31bc1e20b38ec0 +size 20374 diff --git a/detail_png/Shaft_04494_length.png b/detail_png/Shaft_04494_length.png new file mode 100644 index 0000000000000000000000000000000000000000..bd2d859b41ff159fb46a196418420a39572f48ba --- /dev/null +++ b/detail_png/Shaft_04494_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69493cf19fe45a08ca75792b4ab0aeb650e886fba297234be888577295f33eef +size 14385 diff --git a/detail_png/Shaft_04494_title.png b/detail_png/Shaft_04494_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0ad0ba4acfa5c2848bd6b310324ff424af89a528 --- /dev/null +++ b/detail_png/Shaft_04494_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:029aa086f92cf97375255f9dfd51b9937d3f7e5f64179d002a8bbb087c3e1011 +size 14489 diff --git a/detail_png/Shaft_04495_diam.png b/detail_png/Shaft_04495_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b40aad3c8b29c5c1dedf4d499009412eca811210 --- /dev/null +++ b/detail_png/Shaft_04495_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:362295b5b0faf7c7f732705aedad8d7ec178d3c4cc21e04351278a7e1391209a +size 19497 diff --git a/detail_png/Shaft_04495_length.png b/detail_png/Shaft_04495_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2ee1f4c1958ab422c754068eb342a4a381cf92ee --- /dev/null +++ b/detail_png/Shaft_04495_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23236b02f771ce3507576ac5bde0d418f04b4dc8a94bc622108d8a8f2b416303 +size 15981 diff --git a/detail_png/Shaft_04495_title.png b/detail_png/Shaft_04495_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c34587382504e914582b405e0346827c3a164c95 --- /dev/null +++ b/detail_png/Shaft_04495_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78fd15ec2f3c2f55bb01ce122482d202a0a11a156e84ee1746b6b958e22b1427 +size 22102 diff --git a/detail_png/Shaft_04497_diam.png b/detail_png/Shaft_04497_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4e4888977199b5408ef0a90b3597004e6d6e4117 --- /dev/null +++ b/detail_png/Shaft_04497_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8896e180ebfb772d350ec1c7baaa6a92aa6c95510b15063b4dac0d9e8514db40 +size 32944 diff --git a/detail_png/Shaft_04497_length.png b/detail_png/Shaft_04497_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4bc693240fbeef1d80233f5adb0bf21b1eebc9fa --- /dev/null +++ b/detail_png/Shaft_04497_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2140b9e1b4f764880a6c604cb75758929f633a0d605198e7c354b070504f766 +size 45511 diff --git a/detail_png/Shaft_04497_title.png b/detail_png/Shaft_04497_title.png new file mode 100644 index 0000000000000000000000000000000000000000..51a291ade07c726c34c7b6a01c07f8445b1c655b --- /dev/null +++ b/detail_png/Shaft_04497_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd019d319328abdaad34a089cfe291a5b17bf02938ecae3c11284eb81f97197d +size 29005 diff --git a/detail_png/Shaft_04500_diam.png b/detail_png/Shaft_04500_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4e291e6859ae45a81371b6567b7a402dc543d6a5 --- /dev/null +++ b/detail_png/Shaft_04500_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d45291ba98d60aeca9dbfbe61733098c44b569239a83ac950073a026ff5c8286 +size 25930 diff --git a/detail_png/Shaft_04500_length.png b/detail_png/Shaft_04500_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c644f3b3ec1cd2e35fef332dbfa77763afede40c --- /dev/null +++ b/detail_png/Shaft_04500_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5758f27a4c304e6c6ccd01d084f2babb9c23539e8be920d96dbb4ce50b5c43f8 +size 19620 diff --git a/detail_png/Shaft_04500_title.png b/detail_png/Shaft_04500_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d4a991fb49a989cd9aa030ca54e68e7e0501857e --- /dev/null +++ b/detail_png/Shaft_04500_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbe46e2aac56acae4fb9bce42c1bb899a3486a1a9083d78a7621d88ac2cb43e0 +size 15776 diff --git a/detail_png/Shaft_04501_diam.png b/detail_png/Shaft_04501_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8b2cb7d7327fab5b75b9031373ff4c7fe054b909 --- /dev/null +++ b/detail_png/Shaft_04501_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f67efff490d5e16b855adc0b5b090478fe9484cc77ea56bfc3fc81f017abaf1 +size 19689 diff --git a/detail_png/Shaft_04501_length.png b/detail_png/Shaft_04501_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c3150ec80895ded0a181455b3dfc71de9100f035 --- /dev/null +++ b/detail_png/Shaft_04501_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae6efd5eccf93f38e2be1b0b2abd478a1772ed1805f78b26f74e9adbb6ba6b1f +size 25032 diff --git a/detail_png/Shaft_04501_title.png b/detail_png/Shaft_04501_title.png new file mode 100644 index 0000000000000000000000000000000000000000..830efdad16b21b8d3167a6fc42f86fb454082ca2 --- /dev/null +++ b/detail_png/Shaft_04501_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a160b0138d63919b3a983c1a396c57fa1770d455f298449921dbc46011cc8acb +size 28144 diff --git a/detail_png/Shaft_04504_diam.png b/detail_png/Shaft_04504_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f92fbf9ed246a74dfd0c8b4d37126e6df081fb76 --- /dev/null +++ b/detail_png/Shaft_04504_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41a2539aea4b1596665cc5936b5afd90d4dd1ff8f61355d8a30f263cd19f346a +size 24960 diff --git a/detail_png/Shaft_04504_length.png b/detail_png/Shaft_04504_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b00ebb9424ac9b61e00db6ff54ec61a9cd6250c3 --- /dev/null +++ b/detail_png/Shaft_04504_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e127408585f8d7fd61d66b67758ade636dd432073b78135addb663707a63d1a7 +size 34743 diff --git a/detail_png/Shaft_04504_title.png b/detail_png/Shaft_04504_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d89e829f4a3d60b2fc3818e0cfc6b5e9dedb32c2 --- /dev/null +++ b/detail_png/Shaft_04504_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58ed8989c95a51610fa2058ee122c600438a2c90275b1d44de38c5d539357eb1 +size 31486 diff --git a/detail_png/Shaft_04515_diam.png b/detail_png/Shaft_04515_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b457e1576ed309b381d37ef53a8807945eebd4ed --- /dev/null +++ b/detail_png/Shaft_04515_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4f8ad2aa0711241df9da51540b23c450fa3ddff31e39ebeec45e6c9db115c55 +size 25814 diff --git a/detail_png/Shaft_04515_length.png b/detail_png/Shaft_04515_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b2d110595d975dba7a144b185534ec47a0cb61b5 --- /dev/null +++ b/detail_png/Shaft_04515_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f017b61b9cc391974b76d195faad5ac80a62f0aae76449e645b35e2946320e72 +size 27868 diff --git a/detail_png/Shaft_04515_title.png b/detail_png/Shaft_04515_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7e374ce0c3940298789138ebdf38522e611e3a5c --- /dev/null +++ b/detail_png/Shaft_04515_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:368f08d0b62af19929370cbee32fd8459c2b6f0657d11dacc04bed4f96284faf +size 30990 diff --git a/detail_png/Shaft_04517_diam.png b/detail_png/Shaft_04517_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48effa6f2f345c07ebe4f949a27a194b405e704e --- /dev/null +++ b/detail_png/Shaft_04517_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6447e52383889f2b877ff924b48a9211eb222f12425c89e87be1e5ed25fa18b3 +size 19794 diff --git a/detail_png/Shaft_04517_length.png b/detail_png/Shaft_04517_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cd0bd947529c2ecb3099cd4255c9bb4fbff0230f --- /dev/null +++ b/detail_png/Shaft_04517_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b6541430ea8af0c367600f87812448377955b111d9e58bd09f73ef7721c409b +size 14306 diff --git a/detail_png/Shaft_04517_title.png b/detail_png/Shaft_04517_title.png new file mode 100644 index 0000000000000000000000000000000000000000..93dc423b11e3b00a6a44ad277bf398f9ca03d87b --- /dev/null +++ b/detail_png/Shaft_04517_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08fba129a92a187552c83839d81d39fc909b9a100f0f8d7141e1281a525ea75d +size 21729 diff --git a/detail_png/Shaft_04519_diam.png b/detail_png/Shaft_04519_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2a5cbbc4d430e1c62412694590eb88fd13c2f2e5 --- /dev/null +++ b/detail_png/Shaft_04519_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75503dd654378a554537acb239c65332b62a7f1a85bbbf2ac4a262e7e9c1e471 +size 41739 diff --git a/detail_png/Shaft_04519_length.png b/detail_png/Shaft_04519_length.png new file mode 100644 index 0000000000000000000000000000000000000000..ae7beeac09e227d2546e4483181fed20e19be6b9 --- /dev/null +++ b/detail_png/Shaft_04519_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0140dfc272e8f2376416eb849de435e50a17daf61952d186029c8f52a30e1ee7 +size 60107 diff --git a/detail_png/Shaft_04519_title.png b/detail_png/Shaft_04519_title.png new file mode 100644 index 0000000000000000000000000000000000000000..052aedad02907ba8d69dd697839763bdc7ee7b5c --- /dev/null +++ b/detail_png/Shaft_04519_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fab4da111ea8c46484bbda14398250a73c95570ec32b419992ecb1a6fb32e910 +size 29756 diff --git a/detail_png/Shaft_04521_diam.png b/detail_png/Shaft_04521_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..94cbe1e1c0ade660859b6231644b06f84365497e --- /dev/null +++ b/detail_png/Shaft_04521_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04267d6b74f46219b2dd6c26cfe7e73fa20da1f2f17578f946f3eae9428e0de3 +size 35871 diff --git a/detail_png/Shaft_04521_length.png b/detail_png/Shaft_04521_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4d0c09ba15299c292a91754b78e7a314d48c086a --- /dev/null +++ b/detail_png/Shaft_04521_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9f4f63d116a35127b37fa79ee5486e6ce0b9447dbb701b95827e0470008399f +size 31652 diff --git a/detail_png/Shaft_04521_title.png b/detail_png/Shaft_04521_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7b21b0df67da8671bbc246084dde72d22e3decfd --- /dev/null +++ b/detail_png/Shaft_04521_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:203aaafa6f7abf97ccb52e5cf0ca661914a38755630fc998fdb1b3d48fb72044 +size 28688 diff --git a/detail_png/Shaft_04523_diam.png b/detail_png/Shaft_04523_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d09e5f9f78fb5423862c3ca40bb4ea0e049820e7 --- /dev/null +++ b/detail_png/Shaft_04523_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26c267c2d9b13673c30dc500a9a78f6989d29a173d1bd898353ac7a9dfa8edcd +size 19286 diff --git a/detail_png/Shaft_04523_length.png b/detail_png/Shaft_04523_length.png new file mode 100644 index 0000000000000000000000000000000000000000..834947b858deb4fb34fa8b05a0c634a1a6be9bdb --- /dev/null +++ b/detail_png/Shaft_04523_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb98ef749a0cdff77227cfedc883d91b05ca3052daec9bc8ae647db331781fd4 +size 15578 diff --git a/detail_png/Shaft_04523_title.png b/detail_png/Shaft_04523_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c59061c4b92dafa08a934b19defe1a62dc982483 --- /dev/null +++ b/detail_png/Shaft_04523_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:057dd030c47d4401dcabc4b892957342256c49689b03bfdf8952cafe26ec3f8f +size 18835 diff --git a/detail_png/Shaft_04529_diam.png b/detail_png/Shaft_04529_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..70d561089bd1ed76b4bf7cf4c70847ae1177c832 --- /dev/null +++ b/detail_png/Shaft_04529_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b73e5916a9c25e03d186609d4e559e3e79f0fc8c8039d78f7d22d31f8a969cc4 +size 19298 diff --git a/detail_png/Shaft_04529_length.png b/detail_png/Shaft_04529_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fc374cfcac7d3c921a7094c5006e88be75f1cc0f --- /dev/null +++ b/detail_png/Shaft_04529_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d324f5ff30a95ecfc0b29908a2856efcec1bbed12573dc574e158a1ea7abaf9 +size 14828 diff --git a/detail_png/Shaft_04529_title.png b/detail_png/Shaft_04529_title.png new file mode 100644 index 0000000000000000000000000000000000000000..514656c8db7a38daac5afdd68b070f433ed675f7 --- /dev/null +++ b/detail_png/Shaft_04529_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90bb143f5685cb9cec6b4f75d222ccea4b53fcb8176ff4dad0658dbc7e7081be +size 14701 diff --git a/detail_png/Shaft_04532_diam.png b/detail_png/Shaft_04532_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bf5d2e2eed8a0c52b3d416c839a830a1f4d116be --- /dev/null +++ b/detail_png/Shaft_04532_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82e0b9c3feb6d068397853bb52da1b53032f8ff472dcdfd62aff6ee70ca96f65 +size 24221 diff --git a/detail_png/Shaft_04532_length.png b/detail_png/Shaft_04532_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7bf818a3e099642e39feca74808f7db5587b7367 --- /dev/null +++ b/detail_png/Shaft_04532_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb32c227a4e5e6bd97c82c79258411797e0ec4f210534fd5494f70b32f792ab2 +size 22081 diff --git a/detail_png/Shaft_04532_title.png b/detail_png/Shaft_04532_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c60015a6a937b9893729523c1cb700d35bfe5270 --- /dev/null +++ b/detail_png/Shaft_04532_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1607307707cf74de52114f41aa8e785b17af7005e4c73b5be36aea9d675b21bc +size 28588 diff --git a/detail_png/Shaft_04534_diam.png b/detail_png/Shaft_04534_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..266701229c071d6711ecf5e16ae8255a7a29ad09 --- /dev/null +++ b/detail_png/Shaft_04534_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcf0b7ec250cd3a93fa5d43fd79a084156be94fc604c3ec36a9916c1ebaaaee1 +size 24738 diff --git a/detail_png/Shaft_04534_length.png b/detail_png/Shaft_04534_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5520aacd09f6d5548c4dce9158997e95664c9159 --- /dev/null +++ b/detail_png/Shaft_04534_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18eca1ae89a2b191da3b2a077cb74c77afc324c88547ba7dd0221b29193644e2 +size 35819 diff --git a/detail_png/Shaft_04534_title.png b/detail_png/Shaft_04534_title.png new file mode 100644 index 0000000000000000000000000000000000000000..20b8f6d9e0c557e2f3ba041f850c91dabf50895d --- /dev/null +++ b/detail_png/Shaft_04534_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12f0058d799b8054b2b4ad1bb026331ca9f52a59dbae9837d8a2750fc93bdf63 +size 31926 diff --git a/detail_png/Shaft_04537_diam.png b/detail_png/Shaft_04537_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fbbb864469ac7febfbee2266e8345f694c18763f --- /dev/null +++ b/detail_png/Shaft_04537_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:961a436d6a1b805b322781b041718ebd8a87e3f3a0cc38f8c56fc155577f84aa +size 19740 diff --git a/detail_png/Shaft_04537_length.png b/detail_png/Shaft_04537_length.png new file mode 100644 index 0000000000000000000000000000000000000000..81a0cb6ccfc061a0804f45b34447d9d392fadaf3 --- /dev/null +++ b/detail_png/Shaft_04537_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7545b0ef6d2e2f5eeb9ca43cf3f448d1aad7cd08c1e3448647c6852600ef81e9 +size 15240 diff --git a/detail_png/Shaft_04537_title.png b/detail_png/Shaft_04537_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c0698a5883e1b37d21f014ebc6baeb85c3547228 --- /dev/null +++ b/detail_png/Shaft_04537_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef35c83f080178063c2bdb9f2cad65dd3c6c1411c0b8a3981c7a12abeb5debd9 +size 14704 diff --git a/detail_png/Shaft_04539_diam.png b/detail_png/Shaft_04539_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bbadf4e88ab9a340643cf313af84b19b0edb7013 --- /dev/null +++ b/detail_png/Shaft_04539_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0fb5d8ba4e2775b61277fd9e1614d126c98ba280bb272086619715358c0ab13 +size 27622 diff --git a/detail_png/Shaft_04539_length.png b/detail_png/Shaft_04539_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6768a70d19c1e9852b3e9551354940aeaef13061 --- /dev/null +++ b/detail_png/Shaft_04539_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea9f8c67b54981e0ee7dad992ae1c9f0a78d16a20c11e3aa653c901f011abb00 +size 32381 diff --git a/detail_png/Shaft_04539_title.png b/detail_png/Shaft_04539_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dd64b3ec545463420bd42b669a1f2a49c8c4d9ba --- /dev/null +++ b/detail_png/Shaft_04539_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bf60077c2248d87af6c53e7284ffdacae3b6ac55c06f8962b5d8aa80e232d40 +size 30443 diff --git a/detail_png/Shaft_04546_diam.png b/detail_png/Shaft_04546_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4634d51ef2e01c0f889e4fc4df3e647c6d80d95b --- /dev/null +++ b/detail_png/Shaft_04546_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaa1279b4bdabae9480271478616ad03f65bb835836df0cbe5d770c49ff65fb1 +size 23797 diff --git a/detail_png/Shaft_04546_length.png b/detail_png/Shaft_04546_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1fc3b118d93906e3f9f3f8d840d4c57da712349 --- /dev/null +++ b/detail_png/Shaft_04546_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9abdd01f2972a85bad12e4de63ae5564c0bca6c5a0c6154f0d07298db6e7a4d +size 21520 diff --git a/detail_png/Shaft_04546_title.png b/detail_png/Shaft_04546_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8762de9bf81a258ea2c0b39da2e95a68054ebca8 --- /dev/null +++ b/detail_png/Shaft_04546_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6b506e6ecde773b9c7c52e18a6f19cc5845ad5e3d1da3e3b7ca4863d8c644de +size 20368 diff --git a/detail_png/Shaft_04547_diam.png b/detail_png/Shaft_04547_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..361bd2da54e3b9e67a5cb253ac682899ab6bf43f --- /dev/null +++ b/detail_png/Shaft_04547_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e431a1c207cd8f839f47dd5ddca4f4fc4f9f4cd7524028edd673a1497b41dba +size 26413 diff --git a/detail_png/Shaft_04547_length.png b/detail_png/Shaft_04547_length.png new file mode 100644 index 0000000000000000000000000000000000000000..27df285c48843a22ca2723823e978e625f30903c --- /dev/null +++ b/detail_png/Shaft_04547_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a55485dcd02d11f1519eaa4b869293d44bebbe76fbdba9905c8fd797beebdb31 +size 20932 diff --git a/detail_png/Shaft_04547_title.png b/detail_png/Shaft_04547_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1376e34e2c1db1fb7e191c64c1c30a42b8851984 --- /dev/null +++ b/detail_png/Shaft_04547_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a87542b75e6ebae67aeeb2598c359eff96743f872fa56ff892089cc60d78d8aa +size 18829 diff --git a/detail_png/Shaft_04548_diam.png b/detail_png/Shaft_04548_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..93b400bad18e07fa16d6419517b4637843a93ff1 --- /dev/null +++ b/detail_png/Shaft_04548_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f66b81a64bd8288c9d00b5a43b93afd50bf9d87245af954fac917a0c286fc88b +size 19508 diff --git a/detail_png/Shaft_04548_length.png b/detail_png/Shaft_04548_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5f66db1c9953509eef1ee77728ea02e0c063ece8 --- /dev/null +++ b/detail_png/Shaft_04548_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a24df9a0953b40e11cd408821d29d6be0ecd3bc9761194c5acb403803d196e6 +size 16389 diff --git a/detail_png/Shaft_04548_title.png b/detail_png/Shaft_04548_title.png new file mode 100644 index 0000000000000000000000000000000000000000..67e4f966f5fd6af218f26abbc1ca0986dec576f3 --- /dev/null +++ b/detail_png/Shaft_04548_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c73495effeff7ebdc2c9821b5005c4e57c7441622f60a6f14e7eff172ba31545 +size 15843 diff --git a/detail_png/Shaft_04552_diam.png b/detail_png/Shaft_04552_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..46831221a363ad57ae665101d6f395236d31aa4a --- /dev/null +++ b/detail_png/Shaft_04552_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:deae57e1c53228d3c3b295606ef5ff6b747732e60b1b47a6b13b921571796ce5 +size 20041 diff --git a/detail_png/Shaft_04552_length.png b/detail_png/Shaft_04552_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a6f513735528dba9de512a2e02ccdc501cd55596 --- /dev/null +++ b/detail_png/Shaft_04552_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b42b128377819a8587961fdb425254e0945bb68ce4fb4fe8c8e0b209c8d7e825 +size 17453 diff --git a/detail_png/Shaft_04552_title.png b/detail_png/Shaft_04552_title.png new file mode 100644 index 0000000000000000000000000000000000000000..db76c0ea711b1d72ac7d8c3288ec2a21a1398aaf --- /dev/null +++ b/detail_png/Shaft_04552_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fd4d7182ae2b228c8d446732e65cc358fcb0ebbe4b1d1186c1c1e4ac1da82e5 +size 15781 diff --git a/detail_png/Shaft_04555_diam.png b/detail_png/Shaft_04555_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..37a4cc475964b97f9c355271e3977ba47f044243 --- /dev/null +++ b/detail_png/Shaft_04555_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f5d7e4eb1e2a64bca4776635c92b4ca47454ac049feeee793314b6981d343fa +size 19236 diff --git a/detail_png/Shaft_04555_length.png b/detail_png/Shaft_04555_length.png new file mode 100644 index 0000000000000000000000000000000000000000..066a5d4be7a6a1697d87d06aeae8ef23519a6201 --- /dev/null +++ b/detail_png/Shaft_04555_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3244051b5202a40e6af36929679e4ac5ef57959b32baee5d716fb08d4d975920 +size 16043 diff --git a/detail_png/Shaft_04555_title.png b/detail_png/Shaft_04555_title.png new file mode 100644 index 0000000000000000000000000000000000000000..91d248189bd8c152b97597977ba1e8191b44ec08 --- /dev/null +++ b/detail_png/Shaft_04555_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f27727736df35e9689c10a2d686843f7f7798e572a0998e8687df56d5d5b403b +size 15291 diff --git a/detail_png/Shaft_04557_diam.png b/detail_png/Shaft_04557_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0d659262a0cd914d29e8bdc27bd805be876d99f0 --- /dev/null +++ b/detail_png/Shaft_04557_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61858ed8f265191e8c987d7809630ade3de2dbdceb9be419bfc3a65d2ffc7643 +size 19618 diff --git a/detail_png/Shaft_04557_length.png b/detail_png/Shaft_04557_length.png new file mode 100644 index 0000000000000000000000000000000000000000..47e71ccf1d45fd260c60802768c695719e3b04ff --- /dev/null +++ b/detail_png/Shaft_04557_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51de9eef2692e916d3d23ba11b68e3b5fbabffdb281767c44b3f1d81241c5af4 +size 16928 diff --git a/detail_png/Shaft_04557_title.png b/detail_png/Shaft_04557_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4f732125a908423077288fcd83e7e1d04129d622 --- /dev/null +++ b/detail_png/Shaft_04557_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b093c7332d3fa0c5e8ee5604d4e90364fc15d7d36c76b5b9697988650e1866f5 +size 25633 diff --git a/detail_png/Shaft_04559_diam.png b/detail_png/Shaft_04559_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..967b783260273e27ce1bed2819a9fd1f15eedbc0 --- /dev/null +++ b/detail_png/Shaft_04559_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93b7e17dfd8cdba1b0ec0f6f78da418a54760ef9d60964e3bd8ed0e2bcdc75e5 +size 25492 diff --git a/detail_png/Shaft_04559_length.png b/detail_png/Shaft_04559_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2fe9dade0fe695c3075a5fd15ecd6cc4012fa319 --- /dev/null +++ b/detail_png/Shaft_04559_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e73d8443f034143ad763477bf22b9c882fbdd4ef6b65b955b019e1ea44a4461 +size 20736 diff --git a/detail_png/Shaft_04559_title.png b/detail_png/Shaft_04559_title.png new file mode 100644 index 0000000000000000000000000000000000000000..971b1a5dc27838488845a0eefed8f79178d7dd57 --- /dev/null +++ b/detail_png/Shaft_04559_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:508b10bd779f0620d7f7acbf60ccd5707a39099844649e8fc7681a65132636f3 +size 19499 diff --git a/detail_png/Shaft_04562_diam.png b/detail_png/Shaft_04562_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f4df6e3f1f2bc8d3f900636c198864055a2a42c6 --- /dev/null +++ b/detail_png/Shaft_04562_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58eda4eb8c35ea0475b64f28e51ef529c7c85a25cc54275bb92acbfe849c691d +size 24470 diff --git a/detail_png/Shaft_04562_length.png b/detail_png/Shaft_04562_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2c45b537356418af89564144b8ef5768dd2428a2 --- /dev/null +++ b/detail_png/Shaft_04562_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:493d51650d6355e9306b9b7782577e52878a7363d601581479b8650a1040c0b3 +size 31632 diff --git a/detail_png/Shaft_04562_title.png b/detail_png/Shaft_04562_title.png new file mode 100644 index 0000000000000000000000000000000000000000..de32ae974b34b9c20031ec5f8d1bd37ace26373c --- /dev/null +++ b/detail_png/Shaft_04562_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23f4ce3c7e87b4a550fd73256c978f67efe10b941e58e2455c75e4fdce3bdd70 +size 29483 diff --git a/detail_png/Shaft_04568_diam.png b/detail_png/Shaft_04568_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..608b25207cb71a815dc53d81cb62fc280ab1ff84 --- /dev/null +++ b/detail_png/Shaft_04568_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99647e7d239769805e970d979679cc33f8ee41c21173de8fad36f6b9f0b611da +size 34292 diff --git a/detail_png/Shaft_04568_length.png b/detail_png/Shaft_04568_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fac5914a2d5385eac72d670aac4d01b43d784875 --- /dev/null +++ b/detail_png/Shaft_04568_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06d70e5ecad5defc4b2b0a549c2dd6924d9ba77a55f37bb63ee6a72ddb9db686 +size 49447 diff --git a/detail_png/Shaft_04568_title.png b/detail_png/Shaft_04568_title.png new file mode 100644 index 0000000000000000000000000000000000000000..657ff8f6d8244bc485ece4a49d96d5e5145cd454 --- /dev/null +++ b/detail_png/Shaft_04568_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b81b6e493d1f8876c1e5908a2b7878ee49ebfa5a79bba92f1d6334472fe0791f +size 33899 diff --git a/detail_png/Shaft_04569_diam.png b/detail_png/Shaft_04569_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c99906b54855eb4e2154696e0fd3829c8d9653b5 --- /dev/null +++ b/detail_png/Shaft_04569_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1842d2522b5b2f6beb42e43164537d13c054b12594c24cccfde5037f1ac77c2c +size 29205 diff --git a/detail_png/Shaft_04569_length.png b/detail_png/Shaft_04569_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fee5f6d1fb9dc15a4d2ba75fbe4dae696509657e --- /dev/null +++ b/detail_png/Shaft_04569_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fdbb2f760ecd5661ab0c19dfd975f3a79667b49d1fc8de83e638b26c8f227a3 +size 30359 diff --git a/detail_png/Shaft_04569_title.png b/detail_png/Shaft_04569_title.png new file mode 100644 index 0000000000000000000000000000000000000000..31b4eec354f7e3cdd154ab862e8fcde5ccf60c3b --- /dev/null +++ b/detail_png/Shaft_04569_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df0289dcde505b7f25d1f92990fe3b7a58cc2278674e8de32a805b58a45559a0 +size 35829 diff --git a/detail_png/Shaft_04572_diam.png b/detail_png/Shaft_04572_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3b36010e04d383d5f3a72d5167b710c77ccdf1df --- /dev/null +++ b/detail_png/Shaft_04572_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ef95e4c2ac6107f22290091a47c533abf74f48acbdb9d5a8689d21f0d55c240 +size 18985 diff --git a/detail_png/Shaft_04572_length.png b/detail_png/Shaft_04572_length.png new file mode 100644 index 0000000000000000000000000000000000000000..01d5b075fcb5bf9cd53f23cc47bb974848a00509 --- /dev/null +++ b/detail_png/Shaft_04572_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99db9d1b0bfa85b12c9e64ba471c569e2336b15cdd852ec4b5fdbbc20d3270f6 +size 20021 diff --git a/detail_png/Shaft_04572_title.png b/detail_png/Shaft_04572_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e50fd4b11ebaf4b6189dad765661868b63dc78cc --- /dev/null +++ b/detail_png/Shaft_04572_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4962dc73aae382998eab589d4664bb29b4effc91f36aa34266ff829b2e7d76a4 +size 34430 diff --git a/detail_png/Shaft_04585_diam.png b/detail_png/Shaft_04585_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8f87f7148cb51a3ada5f76941391a913180ba907 --- /dev/null +++ b/detail_png/Shaft_04585_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0da993593d75d4f68274f1593d4f96e99c97cbd56390f442b48e4b9d66d8ddcd +size 26437 diff --git a/detail_png/Shaft_04585_length.png b/detail_png/Shaft_04585_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a68d695be654abcb3bc4ce4f812dea99b0b1939c --- /dev/null +++ b/detail_png/Shaft_04585_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1975fa36d959b223b5e6a61ffaf45e9578a37bbcbe4920191a516df38be91d5b +size 34943 diff --git a/detail_png/Shaft_04585_title.png b/detail_png/Shaft_04585_title.png new file mode 100644 index 0000000000000000000000000000000000000000..09bde28db28932c054cb64ffe0657422dac7f36f --- /dev/null +++ b/detail_png/Shaft_04585_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:024fb731c077ebad5a25a12dac358a5ce74c03d30c732b34c048a395a1c15a1f +size 35930 diff --git a/detail_png/Shaft_04588_diam.png b/detail_png/Shaft_04588_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..531fef4527bb4e18e5885ea65a17e779c27d1392 --- /dev/null +++ b/detail_png/Shaft_04588_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62c0447be201c975206093ea53d725dc77551bddf75340fc967b65f38322efcf +size 19847 diff --git a/detail_png/Shaft_04588_length.png b/detail_png/Shaft_04588_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0e19fa17a6265761ba454b1249fbf00bfc69930f --- /dev/null +++ b/detail_png/Shaft_04588_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45ac33b30a60d1c09029c110722c810ea6e6adf8e78a078de895439bb6a16b81 +size 16685 diff --git a/detail_png/Shaft_04588_title.png b/detail_png/Shaft_04588_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c23ea52e7d1c66ffcce2c1da0ebf3e021b4d9807 --- /dev/null +++ b/detail_png/Shaft_04588_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1afee6b3d74059206bf0797d0b175080dabd6cea99d8def56b065781b56d91d +size 18698 diff --git a/detail_png/Shaft_04599_diam.png b/detail_png/Shaft_04599_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..66c559d63aacf8c93a13cd71bc25e4e250d08577 --- /dev/null +++ b/detail_png/Shaft_04599_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33e95a2b891dc7d3e9d6cff06be9c692b94c29b4b8715d7f1d0094ada883129a +size 27422 diff --git a/detail_png/Shaft_04599_length.png b/detail_png/Shaft_04599_length.png new file mode 100644 index 0000000000000000000000000000000000000000..57479d80c3905038238670efddd5ac5abeb1949c --- /dev/null +++ b/detail_png/Shaft_04599_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adde15029d8c6ddf0a782daa601ebb547e517c6828b804392fcd056ee05cd702 +size 23363 diff --git a/detail_png/Shaft_04599_title.png b/detail_png/Shaft_04599_title.png new file mode 100644 index 0000000000000000000000000000000000000000..76487cc36ee63b69c949d470e55562b7128f7e74 --- /dev/null +++ b/detail_png/Shaft_04599_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b57b9b662db798aea45f288ddd6919d4918f1619d1c33089ea3bfd1bd6c0ef01 +size 20584 diff --git a/detail_png/Shaft_04601_diam.png b/detail_png/Shaft_04601_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cabd1b02fc313b7b2ef4108339cd529057a34dd2 --- /dev/null +++ b/detail_png/Shaft_04601_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18668f7c9b0bd02142eaa2e47e175d4bc91a9572cb82237383df84f8d1801c5f +size 33709 diff --git a/detail_png/Shaft_04601_length.png b/detail_png/Shaft_04601_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b27efcc136ed697e66cf4a26f4251e4b589b7077 --- /dev/null +++ b/detail_png/Shaft_04601_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a38b70b350ab6f44e63101edb3da1ae12c79e6efbfe1d02ddcf5a055ab7570e3 +size 29319 diff --git a/detail_png/Shaft_04601_title.png b/detail_png/Shaft_04601_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1a250988c81475ed79eee5066b6c120fee5baaec --- /dev/null +++ b/detail_png/Shaft_04601_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b883f5a5fa907ff07b40c7f0bbc6ba160ce6823acb47e8c3d5a71f81bc8f4df2 +size 25064 diff --git a/detail_png/Shaft_04604_diam.png b/detail_png/Shaft_04604_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..bc7e2a045a7db3de82f93e1f7a34c85d77c741cb --- /dev/null +++ b/detail_png/Shaft_04604_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d4ea8b4cd22ec626ea5dcf2e1529d48ca7d6f9ea52cca4241acaada86fc2593 +size 30466 diff --git a/detail_png/Shaft_04604_length.png b/detail_png/Shaft_04604_length.png new file mode 100644 index 0000000000000000000000000000000000000000..36cd2768f637c3d1c7fd1ca30ced423e309ef566 --- /dev/null +++ b/detail_png/Shaft_04604_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0dfc18262e92ce701edc333f498b321238f9ddce511d0ce9f32bf00c437ba78 +size 44591 diff --git a/detail_png/Shaft_04604_title.png b/detail_png/Shaft_04604_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5e7617e8ab3ec7fdc0a8a8785dcd03c4fb52e0bf --- /dev/null +++ b/detail_png/Shaft_04604_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1f2b274054883ad6802fefb7fef4483c1d1b0c5bb84acc2053906661ad14990 +size 32250 diff --git a/detail_png/Shaft_04608_diam.png b/detail_png/Shaft_04608_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..89797615ba2f6fb585a3eeffd1d8b8cc7bc28048 --- /dev/null +++ b/detail_png/Shaft_04608_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44bafa1ac9bd0eeeb69a57302a38edbe02734b17be042a8f61d656e05c954d8b +size 32102 diff --git a/detail_png/Shaft_04608_length.png b/detail_png/Shaft_04608_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9249906a2c89eb31b35fd479f23b8f863af39827 --- /dev/null +++ b/detail_png/Shaft_04608_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4781282431d9cc6036f3535d67979fcecfd28fb36be9d240e9db155419762be6 +size 38044 diff --git a/detail_png/Shaft_04608_title.png b/detail_png/Shaft_04608_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0c706e4547e0cfb72db978205b4d7791e079c50a --- /dev/null +++ b/detail_png/Shaft_04608_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef2554af46f9578bb5d762a19b1193681eefdb44cb2906fccd5faacb7529c22c +size 36228 diff --git a/detail_png/Shaft_04609_diam.png b/detail_png/Shaft_04609_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9a6750f729067fd3f5cf301cfd92ecc2fff101d0 --- /dev/null +++ b/detail_png/Shaft_04609_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09bf5d20ec56ace82a1aa0daf7f9ef7ffb3662254f381eeb34369df2f2ff2788 +size 27932 diff --git a/detail_png/Shaft_04609_length.png b/detail_png/Shaft_04609_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c5ab0fcb98a20f829bdde6dfe570f79e5cba00c2 --- /dev/null +++ b/detail_png/Shaft_04609_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e33504e288a865ff1c2d4d51e30eb6969638df1e70e35c94039db26af40754be +size 30541 diff --git a/detail_png/Shaft_04609_title.png b/detail_png/Shaft_04609_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f54a07b7460de311bbca481e74cfe4766f73a04d --- /dev/null +++ b/detail_png/Shaft_04609_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7f4d61caea1bc7a25aa2a62ed22fa99822d9c85896c66e6b1a9fe096d195522 +size 36157 diff --git a/detail_png/Shaft_04611_diam.png b/detail_png/Shaft_04611_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d065d22fea0726853d8b82611b1de6c0ecc8d14b --- /dev/null +++ b/detail_png/Shaft_04611_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eeb5ab87c6e2fc8b797ef3fd6a2d31b1246020db4f5424c00a25ecaf62352073 +size 30254 diff --git a/detail_png/Shaft_04611_length.png b/detail_png/Shaft_04611_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1458d00e4c272d707e1c4c4b1fa788d7b501fa1b --- /dev/null +++ b/detail_png/Shaft_04611_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fc8953d3216963ee21c3ff7070da419676e59d006ea3ebee133bc0c28bf555e +size 34970 diff --git a/detail_png/Shaft_04611_title.png b/detail_png/Shaft_04611_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b80a108bcf65551d450c46580efe0ef59aa730f9 --- /dev/null +++ b/detail_png/Shaft_04611_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1f7dd6445ce369c1176cdbf30d1400510e0aa5f6b344a63f05b32871994edaa +size 30693 diff --git a/detail_png/Shaft_04614_diam.png b/detail_png/Shaft_04614_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c49b18fc6be20daac3e9200b311fb43885dd2550 --- /dev/null +++ b/detail_png/Shaft_04614_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1dd0c21d3052be9ed26d01e18e50478aae0300393bddf951e9b5f1d379f4b0dd +size 32042 diff --git a/detail_png/Shaft_04614_length.png b/detail_png/Shaft_04614_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d1bcf8ae64ba997ef966f0585697139848aa9458 --- /dev/null +++ b/detail_png/Shaft_04614_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:853faa63674cd21b99961830efb9970b67ff40113a6c2983473375efbed9d17b +size 44366 diff --git a/detail_png/Shaft_04614_title.png b/detail_png/Shaft_04614_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c8e7c8f3a6f3cedf8de90471cf97b2a63d8bb029 --- /dev/null +++ b/detail_png/Shaft_04614_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84c88cdaa2cfd54be9f67610f0d54db90a44d5e46af1da02f84277eb8c7c53bb +size 29165 diff --git a/detail_png/Shaft_04616_diam.png b/detail_png/Shaft_04616_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2d38cb195ddb04dbdcaf9dd67bf7e07bcf04b94e --- /dev/null +++ b/detail_png/Shaft_04616_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ff4b65021f713112a389b49581ba21a827951f3db992ba8ab93e352ced4587c +size 20270 diff --git a/detail_png/Shaft_04616_length.png b/detail_png/Shaft_04616_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b867cd25069f1e159355dbb39a51f714bd1e4e7e --- /dev/null +++ b/detail_png/Shaft_04616_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06f25eeed86d26dcd46fccf53d3dc2af1ef0da39cc9f73e8c64550be0bec2da6 +size 22183 diff --git a/detail_png/Shaft_04616_title.png b/detail_png/Shaft_04616_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1153e119af7bcf92c8cf50a88ec90455ca12ff86 --- /dev/null +++ b/detail_png/Shaft_04616_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34f153db726dff69a70605c4e18983436bee171e810fc4985259eb5c9f02995d +size 26303 diff --git a/detail_png/Shaft_04622_diam.png b/detail_png/Shaft_04622_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..220f93394f9696571089b4d598d8ec26147fb8c2 --- /dev/null +++ b/detail_png/Shaft_04622_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:296cb3b33a8fde8e6b5ca80d14eb98675dabc27b3781a7675c3adee555cb2ae1 +size 20764 diff --git a/detail_png/Shaft_04622_length.png b/detail_png/Shaft_04622_length.png new file mode 100644 index 0000000000000000000000000000000000000000..901a75053d7a2bb455a7e6c6004806bf3ce5ad74 --- /dev/null +++ b/detail_png/Shaft_04622_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11b604fb5758450e357693a233a28c1a280de49f5749b3e77f74a2b2bc9c76b5 +size 19061 diff --git a/detail_png/Shaft_04622_title.png b/detail_png/Shaft_04622_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9f4c759087eefa46a5fd376f5d2f5ed1656c6749 --- /dev/null +++ b/detail_png/Shaft_04622_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48c43bcb43aed8a2ede4699178515bd7f1ea2c7c45d7ac6dfd2e727194c7ecc0 +size 21089 diff --git a/detail_png/Shaft_04631_diam.png b/detail_png/Shaft_04631_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..27426bd5a60567bb0fb7a36feddf57dc223ca685 --- /dev/null +++ b/detail_png/Shaft_04631_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f7f8a0e67927e3887ce9bd9d203a30d5ca2a21beb0e27361cf5969f8157aab6 +size 20548 diff --git a/detail_png/Shaft_04631_length.png b/detail_png/Shaft_04631_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3130b9ec0e7dc8ddd260128d1eaaeec5745b19b7 --- /dev/null +++ b/detail_png/Shaft_04631_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7d623d97f62b6d69de0bebb63f18af50787bd6fd169432790157e1451ce7bf1 +size 17534 diff --git a/detail_png/Shaft_04631_title.png b/detail_png/Shaft_04631_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8409a239a353313656af845692dd0a64442d10dc --- /dev/null +++ b/detail_png/Shaft_04631_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8d3eb709c58aaa4469b00dfd9668781883fe938c94b78c413547d2c14484642 +size 18572 diff --git a/detail_png/Shaft_04632_diam.png b/detail_png/Shaft_04632_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6984e635fefa7f89eb5357ff74d9c7c9a6d443f8 --- /dev/null +++ b/detail_png/Shaft_04632_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc158cb7f6c809e6c4354615c3fc408c467457753a63678cd6ddddd13eb8f447 +size 27296 diff --git a/detail_png/Shaft_04632_length.png b/detail_png/Shaft_04632_length.png new file mode 100644 index 0000000000000000000000000000000000000000..93939845d6b311060f8fa931fed48799f5c6de77 --- /dev/null +++ b/detail_png/Shaft_04632_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e29e3ae64889261d93ceb91b0ba5cc14bf2699e15c676fa97f6c15d15f886825 +size 27458 diff --git a/detail_png/Shaft_04632_title.png b/detail_png/Shaft_04632_title.png new file mode 100644 index 0000000000000000000000000000000000000000..251133509901ae3251bc57901caebadb92761149 --- /dev/null +++ b/detail_png/Shaft_04632_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08496d47ff8b672dd26d9f3a8108f71d84ffc8d0071c0aebbebd13516fcad251 +size 29415 diff --git a/detail_png/Shaft_04639_diam.png b/detail_png/Shaft_04639_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9c7b7925cea96a391b118340eef47ddfafd532ca --- /dev/null +++ b/detail_png/Shaft_04639_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d450c858aef529200afa3d2a3452f3d0c39826ae4e18b7e17d814851d98cc7c8 +size 19080 diff --git a/detail_png/Shaft_04639_length.png b/detail_png/Shaft_04639_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a68e69c6cccc8ef66976805dc8a9604cc7953ec6 --- /dev/null +++ b/detail_png/Shaft_04639_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb99b65404967ef6f7ef989e106176f63363e72428ee96c0c49bcaa02ef62f23 +size 26680 diff --git a/detail_png/Shaft_04639_title.png b/detail_png/Shaft_04639_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1288b4f1dc88ea7357b1e19ae3c962b5bb395ecb --- /dev/null +++ b/detail_png/Shaft_04639_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2200fd54a82ef1fd7810a3255e3a7d09177ca6fdc97f2e1d2902cf169a69dd96 +size 29989 diff --git a/detail_png/Shaft_04642_diam.png b/detail_png/Shaft_04642_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5fd084e714f8fb656183d91ef7be6c73d44e74bb --- /dev/null +++ b/detail_png/Shaft_04642_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43a86a398abd800c127fa296ff717d58f8963023b8bc9a19ffb79779742b61ae +size 20447 diff --git a/detail_png/Shaft_04642_length.png b/detail_png/Shaft_04642_length.png new file mode 100644 index 0000000000000000000000000000000000000000..55f0ae253a13bed38e766e7e891d86dac52410cc --- /dev/null +++ b/detail_png/Shaft_04642_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e12970fee40f5ea9496ea56cbe6b48cd7a039e4e65ec1fa93ae66121bc310c5 +size 19868 diff --git a/detail_png/Shaft_04642_title.png b/detail_png/Shaft_04642_title.png new file mode 100644 index 0000000000000000000000000000000000000000..531a528346cde0cc2272e3aca7409c52a2f8da6d --- /dev/null +++ b/detail_png/Shaft_04642_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:878df89ef5a741c2148f7dc8870b743ba19ae70636cc933732b2c6779b9020ab +size 29480 diff --git a/detail_png/Shaft_04646_diam.png b/detail_png/Shaft_04646_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c282cc3dbc8d611e10f4ce88364399d6262e777d --- /dev/null +++ b/detail_png/Shaft_04646_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa9e7d6d912632d03f0cb1d8cdedeea42b90cbc773dc6f462f356b5063381b04 +size 29740 diff --git a/detail_png/Shaft_04646_length.png b/detail_png/Shaft_04646_length.png new file mode 100644 index 0000000000000000000000000000000000000000..46479d300db16092f1a059c27705193f07cb3aae --- /dev/null +++ b/detail_png/Shaft_04646_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7509b9768700622a0c5d5972aac4e58e1d83162057c1979d248d24c2c3aba553 +size 30834 diff --git a/detail_png/Shaft_04646_title.png b/detail_png/Shaft_04646_title.png new file mode 100644 index 0000000000000000000000000000000000000000..988f44b637f1ee2dff118bd44fbfd2bf006421cb --- /dev/null +++ b/detail_png/Shaft_04646_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f43c1399bb34d5c481e2124cf585b08fad3990164fc0235893330827d2f608f6 +size 32114 diff --git a/detail_png/Shaft_04648_diam.png b/detail_png/Shaft_04648_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..964ce1f7fe66a99ef619820f64d89009f37a407c --- /dev/null +++ b/detail_png/Shaft_04648_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:519ca1c67d11836b5aec95d34020e2acbc4511a99dd77ad42886b50a08393048 +size 20042 diff --git a/detail_png/Shaft_04648_length.png b/detail_png/Shaft_04648_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3cc54f2bc24a9f4994131795e6ace7958269e304 --- /dev/null +++ b/detail_png/Shaft_04648_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a40691b70fa8a2586f50c5696d880fe8e04d0c1f727310339330a314688174b7 +size 17300 diff --git a/detail_png/Shaft_04648_title.png b/detail_png/Shaft_04648_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4812e7f5e74a3298eaa43a5d80df0e12a8330b77 --- /dev/null +++ b/detail_png/Shaft_04648_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37cbc0bf9719064bdd370aa613d19532a514ca2a6be7851fe4006f0d2d9435a0 +size 22176 diff --git a/detail_png/Shaft_04650_diam.png b/detail_png/Shaft_04650_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..22115aadedd25562ee4983660bc426e8f455ba4e --- /dev/null +++ b/detail_png/Shaft_04650_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a9758c717702577fc8b67c6eadb5568b6cac59540f96debe1fb930b02caf73e +size 19422 diff --git a/detail_png/Shaft_04650_length.png b/detail_png/Shaft_04650_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f32679542f5c35e9fe14140a4191bf23aef9f024 --- /dev/null +++ b/detail_png/Shaft_04650_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b55d8c0e6e4547f276bc4f6766c30cbf6f0e10e26009da5f20d09fd66914e26 +size 20152 diff --git a/detail_png/Shaft_04650_title.png b/detail_png/Shaft_04650_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f32ea9ec81a1d3970a1bd5ce62a4077469bb3225 --- /dev/null +++ b/detail_png/Shaft_04650_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5000d4e6fd4cd209a7a234cf73d8e3fb60ce63ea45ecd205747437826f3929c4 +size 29906 diff --git a/detail_png/Shaft_04651_diam.png b/detail_png/Shaft_04651_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b89cc2d38826f85a24a3c5d3b8df1b7d51dc1248 --- /dev/null +++ b/detail_png/Shaft_04651_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cbab5a42d23f53d87f9e855d3e72c7a279648bf6bfa0c9f5caf8a07d4b91f69 +size 25273 diff --git a/detail_png/Shaft_04651_length.png b/detail_png/Shaft_04651_length.png new file mode 100644 index 0000000000000000000000000000000000000000..70def4897c6ea295cb8aa74bb9663759de4a4c90 --- /dev/null +++ b/detail_png/Shaft_04651_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0cdb1d4a7ce0ac7d545940ab262f4a366e2af631dae528415560612ad6ababd +size 22099 diff --git a/detail_png/Shaft_04651_title.png b/detail_png/Shaft_04651_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6e05d91d4afa933c4740a5d54efa6a8ffc398824 --- /dev/null +++ b/detail_png/Shaft_04651_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55e3ee342e90dda25d3b106b4f625caadeee6d322622019b95ed2ba549f53abf +size 30278 diff --git a/detail_png/Shaft_04657_diam.png b/detail_png/Shaft_04657_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0c0a981c09a6ed1ca313f5212691b63a1ea8530b --- /dev/null +++ b/detail_png/Shaft_04657_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e89e256e8399dc28b4d2145afcd9fb27753b5543028223f21c6f2fbfec06797 +size 24566 diff --git a/detail_png/Shaft_04657_length.png b/detail_png/Shaft_04657_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7cc647cbb34ecb1456f2deef7974a37681f2b545 --- /dev/null +++ b/detail_png/Shaft_04657_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f9b6a11fcb57c6c4aa8b1a123607d83ce527f8959517feb9d2bdc971bc70d1f +size 16431 diff --git a/detail_png/Shaft_04657_title.png b/detail_png/Shaft_04657_title.png new file mode 100644 index 0000000000000000000000000000000000000000..10ae48a3dc2a163c0df945fbd1ee11211a2ca776 --- /dev/null +++ b/detail_png/Shaft_04657_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f6efe9a4317ca09b2ecaff59d41f9b31dc7a435ae310930ade0277778ed6a58 +size 16538 diff --git a/detail_png/Shaft_04658_diam.png b/detail_png/Shaft_04658_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..168754a9ccbec74ad370706092958821c75b4f50 --- /dev/null +++ b/detail_png/Shaft_04658_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d9954de7eb6e66b00597a085d1f200618b038b449b22b27e15bb010f180b985 +size 19382 diff --git a/detail_png/Shaft_04658_length.png b/detail_png/Shaft_04658_length.png new file mode 100644 index 0000000000000000000000000000000000000000..840bb674097e231cd44295fc0a602dc692d9f1be --- /dev/null +++ b/detail_png/Shaft_04658_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cf67c67f9d364f6f7adc1244da68d2172cfac9db373e23a5402e5051ac15d61 +size 15732 diff --git a/detail_png/Shaft_04658_title.png b/detail_png/Shaft_04658_title.png new file mode 100644 index 0000000000000000000000000000000000000000..15cba5ff0664a765b791b93aa24a0691bdab3934 --- /dev/null +++ b/detail_png/Shaft_04658_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b8974b7a2e2517d9707f357452123c9efda7ca44466623ade16c26202170885 +size 14375 diff --git a/detail_png/Shaft_04660_diam.png b/detail_png/Shaft_04660_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fea9bc6f75ab7b1f0c49b2794d226fbca06dfcaf --- /dev/null +++ b/detail_png/Shaft_04660_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d369510c66f5c32239b3c2077ac9b9e402c9f28b3c948ed9ab254906a7c09c95 +size 22931 diff --git a/detail_png/Shaft_04660_length.png b/detail_png/Shaft_04660_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c002b98f1a299a5065cb18b2f116fdd5346b5eea --- /dev/null +++ b/detail_png/Shaft_04660_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c324c52360dced1915aa96d457a7cf49a55a6214196fc2ec76fe459aa84ae23 +size 20282 diff --git a/detail_png/Shaft_04660_title.png b/detail_png/Shaft_04660_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6cbbc7f20f7db23d30bebf60c313a5cc4cafaed5 --- /dev/null +++ b/detail_png/Shaft_04660_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e87d394f51fae44dc1e84c4bdf435c750cea4e13061d3f0e3144ddac32482d6 +size 22514 diff --git a/detail_png/Shaft_04661_diam.png b/detail_png/Shaft_04661_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4c46796f30b3aca254357dbaef5b2588948ce1ec --- /dev/null +++ b/detail_png/Shaft_04661_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32e3589cfb161ad20d1eb3d1145875caf4ce1b438ce01e71f0d916b7f1423457 +size 24239 diff --git a/detail_png/Shaft_04661_length.png b/detail_png/Shaft_04661_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cdeaba63aaa9c6d80b2d76ab8ce8cc437612ad75 --- /dev/null +++ b/detail_png/Shaft_04661_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0b4969e446dc72bf9070678e6bc35ec0b440e1b4eb6caaef91656bf417ff500 +size 28856 diff --git a/detail_png/Shaft_04661_title.png b/detail_png/Shaft_04661_title.png new file mode 100644 index 0000000000000000000000000000000000000000..406f453425619f88b08bcfd581b2503adea32774 --- /dev/null +++ b/detail_png/Shaft_04661_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89700fa1e69f2f462d516c7b17ef01c42d20d011df088f8de08d17931ad95c13 +size 31866 diff --git a/detail_png/Shaft_04663_diam.png b/detail_png/Shaft_04663_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..266fb6b862832c3e98707c5f4d3224dda04cf8e5 --- /dev/null +++ b/detail_png/Shaft_04663_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f152cd498f1802639d53bc717e1aedc7e093f60088f1b6b1e98c0129a6b3c27 +size 20354 diff --git a/detail_png/Shaft_04663_length.png b/detail_png/Shaft_04663_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7262d2dbec2c4ab09a28aab9afdaca138cf48533 --- /dev/null +++ b/detail_png/Shaft_04663_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6704f9b0255bb40d430339c8b11c7690350e0c7a5593f3b6dd647edd6ebd7aa7 +size 15408 diff --git a/detail_png/Shaft_04663_title.png b/detail_png/Shaft_04663_title.png new file mode 100644 index 0000000000000000000000000000000000000000..63e97f8fa33a6671a810ddcb7f75da1dffc8c267 --- /dev/null +++ b/detail_png/Shaft_04663_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd8cc05c499c7350eaef3f987e8f56a65565cf888b58a10438e5f292bb4a4d1d +size 19920 diff --git a/detail_png/Shaft_04665_diam.png b/detail_png/Shaft_04665_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c1d0452ba8c197cbf15c4f3b4746afb14546449b --- /dev/null +++ b/detail_png/Shaft_04665_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c29705c67a9b7c3cd4f17f68e366327f5cfce978199504f0ea95c4b92270865 +size 35828 diff --git a/detail_png/Shaft_04665_length.png b/detail_png/Shaft_04665_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f7347a2d7e8682b39d2ddef83bd97d7075d662cf --- /dev/null +++ b/detail_png/Shaft_04665_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c45c2be7dcbc89f273a3b92fc83ef371b194ce70098eb3799f345f267cc5c5f +size 35036 diff --git a/detail_png/Shaft_04665_title.png b/detail_png/Shaft_04665_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dcdd4ecbbaf6b4cf5b0408f35af3bfaddb0860f3 --- /dev/null +++ b/detail_png/Shaft_04665_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46e3d64d3db29b5a42ecd25b47742b6a27139c0f6a36bfc086c975012bca5a24 +size 32427 diff --git a/detail_png/Shaft_04668_diam.png b/detail_png/Shaft_04668_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7181daa681d0b2718ee86eba09dae7cf3f9b2de3 --- /dev/null +++ b/detail_png/Shaft_04668_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4b9470714ff1eb7bd3e3cbcdbafbe73228eee41ae0af5cf57db4e2b90a9353d +size 26112 diff --git a/detail_png/Shaft_04668_length.png b/detail_png/Shaft_04668_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0e15f0bdb6e2984dd334e837d611c47cb9f332cc --- /dev/null +++ b/detail_png/Shaft_04668_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c145832d8c20a9880eb9994efcb360a1cc64f61a74d0b2bd78b45d4e492ccd69 +size 30254 diff --git a/detail_png/Shaft_04668_title.png b/detail_png/Shaft_04668_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7aeb3a3e32a57330f6e5d87ca5943820e2d710bb --- /dev/null +++ b/detail_png/Shaft_04668_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb08daf0c3b641db84532e9f0851fa4f2e8936c99a7d80e38592cd222303db18 +size 33148 diff --git a/detail_png/Shaft_04669_diam.png b/detail_png/Shaft_04669_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..9de53e3e7ca0839791a6947e8a7f792c54e80a50 --- /dev/null +++ b/detail_png/Shaft_04669_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97ba995214d8234927c47f0a0f8bc4c6ddd596758d9d6be90a720c5e38e8c4af +size 20256 diff --git a/detail_png/Shaft_04669_length.png b/detail_png/Shaft_04669_length.png new file mode 100644 index 0000000000000000000000000000000000000000..270b5f9ee9c057ad0b3e387c6dab647858fb5e82 --- /dev/null +++ b/detail_png/Shaft_04669_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb09420f91d0b17a350e37ea08c74f2c1d9910e35235ee3e806106da638412e6 +size 25469 diff --git a/detail_png/Shaft_04669_title.png b/detail_png/Shaft_04669_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a1b50a534f20262e011b9091216fd4c4b04c4bf3 --- /dev/null +++ b/detail_png/Shaft_04669_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d2af6c9e61ff9914dbeb06bb06c33661531a48336619875f56343df63b0b5a1 +size 33073 diff --git a/detail_png/Shaft_04673_diam.png b/detail_png/Shaft_04673_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0f90bc3196bdea09d13ff4fe642a4fb6a8d3f987 --- /dev/null +++ b/detail_png/Shaft_04673_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10c008722e039f07449e53e9decc5149963d9d3e002a66ddfb0528871be2e0cf +size 37348 diff --git a/detail_png/Shaft_04673_length.png b/detail_png/Shaft_04673_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c2e5bf2c1f8f2dd882f73e11a2bfea142a51eda9 --- /dev/null +++ b/detail_png/Shaft_04673_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cc21bd82f8f599635b48e2c1d6edc5181a96b31682f53021702f4f2666cbcbf +size 40202 diff --git a/detail_png/Shaft_04673_title.png b/detail_png/Shaft_04673_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e8bc4152ee089d77cc1d834cb9c74748f40a15bf --- /dev/null +++ b/detail_png/Shaft_04673_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04681969bbab7fdbc5a8677e3cf03c816442a66e98067c21baa8ee772c115b49 +size 35312 diff --git a/detail_png/Shaft_04676_diam.png b/detail_png/Shaft_04676_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..97a38cf768fb4cfdf79752c2b01d6e4747173ef4 --- /dev/null +++ b/detail_png/Shaft_04676_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:951d6d90af363693874648bed45b3ca7974f57ec732b66adbaf771910ae2321c +size 24663 diff --git a/detail_png/Shaft_04676_length.png b/detail_png/Shaft_04676_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a6615a7a36bfc54bc63772022fed78eedb4a28af --- /dev/null +++ b/detail_png/Shaft_04676_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:daa5dc3306b7039bab6ef2e7dcb00bf064769094d5e612cdacae293a1ec59ac6 +size 31354 diff --git a/detail_png/Shaft_04676_title.png b/detail_png/Shaft_04676_title.png new file mode 100644 index 0000000000000000000000000000000000000000..70c3aa36bd936781cd741dbbd897d03be13ef08c --- /dev/null +++ b/detail_png/Shaft_04676_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba6c3ad67d18e9f4be28977e46214ae4f4cade33881e1e49a66cadd94138a3b1 +size 32278 diff --git a/detail_png/Shaft_04677_diam.png b/detail_png/Shaft_04677_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..05e6554912b61742afba8b22ce1256e4fe0c871d --- /dev/null +++ b/detail_png/Shaft_04677_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:298406ba5046c4c20cecf2f66813162a622b282030fef07afe57068e7d39bf16 +size 24531 diff --git a/detail_png/Shaft_04677_length.png b/detail_png/Shaft_04677_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a026d9e596940003b16cc92a87c1e2e92acdbebe --- /dev/null +++ b/detail_png/Shaft_04677_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9c6641b2eeb66e235f445aa8a567a9387002a4b4b72215741e64dd9114d73f0 +size 22642 diff --git a/detail_png/Shaft_04677_title.png b/detail_png/Shaft_04677_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9b3cb4219863acc2171fb58cf6d53949bd90cab9 --- /dev/null +++ b/detail_png/Shaft_04677_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a117ff95b7577ec89ddb912ca0eadbb57687ad532bf94831ee3557fb12cad379 +size 30558 diff --git a/detail_png/Shaft_04681_diam.png b/detail_png/Shaft_04681_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e4d35cc41f459842e98300f027525ea6bc56d3f5 --- /dev/null +++ b/detail_png/Shaft_04681_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c070cc93ab138069203167d24c7008b8f887f571a18f7ac2c17e3800450f17a5 +size 24889 diff --git a/detail_png/Shaft_04681_length.png b/detail_png/Shaft_04681_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4227ca160d1e7ce63fe81203e560a80ea576e3e2 --- /dev/null +++ b/detail_png/Shaft_04681_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a69eada288642fabe00930ad8b61e7b16920b2cfd57417b2917e3167a2af5f0 +size 23466 diff --git a/detail_png/Shaft_04681_title.png b/detail_png/Shaft_04681_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c92e894de8cc15f56a527d391bc8709545ebaa3f --- /dev/null +++ b/detail_png/Shaft_04681_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:499eba71d55377d72c24b7c4d6c2d37a03204c0ab3565fa10b30e78c8e2740a6 +size 26147 diff --git a/detail_png/Shaft_04687_diam.png b/detail_png/Shaft_04687_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..698c62ec76dbffc7016cc008acb175d795674bcd --- /dev/null +++ b/detail_png/Shaft_04687_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86658f711063217510b41024ad24d4ccb171bf8ecb9cde6ab2e6cb9bdeea254d +size 24906 diff --git a/detail_png/Shaft_04687_length.png b/detail_png/Shaft_04687_length.png new file mode 100644 index 0000000000000000000000000000000000000000..57853e76c96d00e0d276a84643b83506a0fb8f3f --- /dev/null +++ b/detail_png/Shaft_04687_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:292eebd17f28a26d55ee91e85b413de5e33d54f44aa8715d69d31f79dfc802ed +size 21425 diff --git a/detail_png/Shaft_04687_title.png b/detail_png/Shaft_04687_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6f85b8c9eb4816c086b35bb56b87a25e06d97f34 --- /dev/null +++ b/detail_png/Shaft_04687_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0a3d50ccce5b85a2827b3ad5eab787bac90e9873093f67c085d7d2cb2fb2fe3 +size 21157 diff --git a/detail_png/Shaft_04693_diam.png b/detail_png/Shaft_04693_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e04f46ce82cbbfdee2e555cfd6ec06c2fc8696c2 --- /dev/null +++ b/detail_png/Shaft_04693_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:393e1fb8bf00d08d7082221fe3fe102364a3d31ffb38b2c21f390a51e9bf61f3 +size 20577 diff --git a/detail_png/Shaft_04693_length.png b/detail_png/Shaft_04693_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2a12a6f124303621cbe00ee9a8e672b8b79c35c6 --- /dev/null +++ b/detail_png/Shaft_04693_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db678dfcd6eaf8d340a23bcfb67b1f510142fbbf3e69d4d4e78f0a9c9078e0bf +size 16593 diff --git a/detail_png/Shaft_04693_title.png b/detail_png/Shaft_04693_title.png new file mode 100644 index 0000000000000000000000000000000000000000..163d471f23dc9c22b7f32e6fbc131bcce4845641 --- /dev/null +++ b/detail_png/Shaft_04693_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8844f38f6616f83600fa0b660d0ca487044535230ff9a22143ea55538cc328d7 +size 18935 diff --git a/detail_png/Shaft_04694_diam.png b/detail_png/Shaft_04694_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c1168dc199f5aa37511627ee2a2452ad1927812c --- /dev/null +++ b/detail_png/Shaft_04694_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24073e51dfd80617fd2721031cbad3a84761e61f954121f3e9f339d0618010a9 +size 27357 diff --git a/detail_png/Shaft_04694_length.png b/detail_png/Shaft_04694_length.png new file mode 100644 index 0000000000000000000000000000000000000000..406820a6caa7db4318deec6b835444ed922dbd9c --- /dev/null +++ b/detail_png/Shaft_04694_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d900b4b78c2f4f67f5d08b9d1408b91a5a4be597fb5390fe8dc002ae7d5bcc15 +size 38152 diff --git a/detail_png/Shaft_04694_title.png b/detail_png/Shaft_04694_title.png new file mode 100644 index 0000000000000000000000000000000000000000..48fc4110114ed829228c9cf12bb580b90d3e319a --- /dev/null +++ b/detail_png/Shaft_04694_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b43a47276b3ac21126e99c7aabe273463b4c83717a9e3ac264397d164d4c85d5 +size 30282 diff --git a/detail_png/Shaft_04696_diam.png b/detail_png/Shaft_04696_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d8f8bfd42960ea354d9b9c2b0a462db0d0ae3903 --- /dev/null +++ b/detail_png/Shaft_04696_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03a13326bd7036f624ffde02d16530df1610a47ece88a0c537b67463e9ad7fd1 +size 25809 diff --git a/detail_png/Shaft_04696_length.png b/detail_png/Shaft_04696_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b6ad4590b01d41a6247c569806f9089cf445ce4e --- /dev/null +++ b/detail_png/Shaft_04696_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:625ad365bfe37b29038ad033cc720218b9b4f1731b6d8514dd61d874e76799a7 +size 27304 diff --git a/detail_png/Shaft_04696_title.png b/detail_png/Shaft_04696_title.png new file mode 100644 index 0000000000000000000000000000000000000000..231569b7645dbdc498966ebf6f791d2c5397ac73 --- /dev/null +++ b/detail_png/Shaft_04696_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50872ad0eebabf56d58517b445a29774022985abd59595a1e32295ab8737176b +size 32870 diff --git a/detail_png/Shaft_04700_diam.png b/detail_png/Shaft_04700_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e4a03f658dca1779dc5d088a6214395585838daa --- /dev/null +++ b/detail_png/Shaft_04700_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dbcaee99cddce2a3dbe7a1fc7ba301f5ad62a69eb0e1b346fe50ae04ede8082 +size 29262 diff --git a/detail_png/Shaft_04700_length.png b/detail_png/Shaft_04700_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fc68d92556ad805b917a2ff12f1bdd1f2ff1f71e --- /dev/null +++ b/detail_png/Shaft_04700_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce72f1caeed8fad4701eefc151e74906e60024fb770e32919a9ba3f54563930a +size 27319 diff --git a/detail_png/Shaft_04700_title.png b/detail_png/Shaft_04700_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c9cf6744e1b86a9424e435bf9687dd78937bec86 --- /dev/null +++ b/detail_png/Shaft_04700_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c742c2d104a50088d75387b040ecf46816eb472e556741fcb1834f711d5de6b +size 29731 diff --git a/detail_png/Shaft_04701_diam.png b/detail_png/Shaft_04701_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fc462944c98cbab0151366b734d241efe8cc3db6 --- /dev/null +++ b/detail_png/Shaft_04701_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ed715b97b204f95d001d1ea9cc4f7daca546700de9de91e5a5cd4890a67e433 +size 25130 diff --git a/detail_png/Shaft_04701_length.png b/detail_png/Shaft_04701_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b4b231537169f64113c9a91e0142eb3933aef0b1 --- /dev/null +++ b/detail_png/Shaft_04701_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f5b5e18f63515f360a400171bfdf6496bc5561b97d0c072423353c3fffcf524 +size 38084 diff --git a/detail_png/Shaft_04701_title.png b/detail_png/Shaft_04701_title.png new file mode 100644 index 0000000000000000000000000000000000000000..76825af5361b814848a10055e0cdc0ba82acd036 --- /dev/null +++ b/detail_png/Shaft_04701_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28755aa8b37720b1b7cb6e1582751340b6e0fc521a54d9d4c80f3cf89c783cc9 +size 27974 diff --git a/detail_png/Shaft_04706_diam.png b/detail_png/Shaft_04706_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7310e91c5a882171eb672e76876eb5b850c8af10 --- /dev/null +++ b/detail_png/Shaft_04706_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81732be2f4e3bedac2a3a4079d7becf009a48ec281d0f53baf63e768139cb253 +size 23892 diff --git a/detail_png/Shaft_04706_length.png b/detail_png/Shaft_04706_length.png new file mode 100644 index 0000000000000000000000000000000000000000..389c295215d23f195519d5943d6ca0894702a0b2 --- /dev/null +++ b/detail_png/Shaft_04706_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74ef18d249ab5eaa855d270e33ed14507eaf274c8536b628102d831b8e857ff0 +size 31211 diff --git a/detail_png/Shaft_04706_title.png b/detail_png/Shaft_04706_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a32e27d5991947a9a129d690b414ffbf9e8d48aa --- /dev/null +++ b/detail_png/Shaft_04706_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7b55b64090e2d60aa38257296a600751476cbda33cec7649e8b40311a7d12e6 +size 32132 diff --git a/detail_png/Shaft_04708_diam.png b/detail_png/Shaft_04708_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ee0ee9e9bf5fc8430c36271fc8361d7c13d9472d --- /dev/null +++ b/detail_png/Shaft_04708_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0be491cc2f70ee7a6994be3916db282fad874c7f45f8269adc604205420aae6c +size 32153 diff --git a/detail_png/Shaft_04708_length.png b/detail_png/Shaft_04708_length.png new file mode 100644 index 0000000000000000000000000000000000000000..462bdef99135b2d9f0df863932450fc35e299c2b --- /dev/null +++ b/detail_png/Shaft_04708_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a42e9e9ebd6d6bf9589a3a31503b5fb2b2018837c9aa33f4bf45950d8d527d37 +size 43505 diff --git a/detail_png/Shaft_04708_title.png b/detail_png/Shaft_04708_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a88cfd7b053dab1e381cbc905e9ccb72ac1159c1 --- /dev/null +++ b/detail_png/Shaft_04708_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b6d6d16f8d9510fd6ebb99e6c50e0e349d2b9adfa63fc88c904cfd87304061a +size 30277 diff --git a/detail_png/Shaft_04710_diam.png b/detail_png/Shaft_04710_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5f7990f72591681dcde83896ffff2a63b2fce9cd --- /dev/null +++ b/detail_png/Shaft_04710_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ba0783193a203a2f16f2e3ac85ef6a580c9543ef4fc2925a05060a7e7ea7557 +size 23730 diff --git a/detail_png/Shaft_04710_length.png b/detail_png/Shaft_04710_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0e09a20b8b06ad5dad1a0529cce88f3dcd44bedb --- /dev/null +++ b/detail_png/Shaft_04710_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78960662801f476ca8a64e4b38a26f54bfc3ea6db6756478db35a32d2bda570d +size 20109 diff --git a/detail_png/Shaft_04710_title.png b/detail_png/Shaft_04710_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a5fdf8a9b33122f5f03f87553cc30b17d4b4e0e1 --- /dev/null +++ b/detail_png/Shaft_04710_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07dff190eec3d37f078b4f33586c851df27f68ba2d5316064e2ffd169e5dcd3c +size 21664 diff --git a/detail_png/Shaft_04711_diam.png b/detail_png/Shaft_04711_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..136bd8f9aaae42fcaf4cff7c3bfa64400aab9f1d --- /dev/null +++ b/detail_png/Shaft_04711_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f268f0c273216dbf6cd6c4a4d3da9e56a83b8c5d08eae8c5622bfa268c608db +size 29462 diff --git a/detail_png/Shaft_04711_length.png b/detail_png/Shaft_04711_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7620f4b2053ab09b1234127802dd405d90db97fd --- /dev/null +++ b/detail_png/Shaft_04711_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6ecb3536565ae49ebbf50c1288f4fb10a047763ae6b6893bf13ed7c4275ab1d +size 36788 diff --git a/detail_png/Shaft_04711_title.png b/detail_png/Shaft_04711_title.png new file mode 100644 index 0000000000000000000000000000000000000000..44a5910e5e85dce43b1db32b49703d3413e731c5 --- /dev/null +++ b/detail_png/Shaft_04711_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47ce4941ba21b535c3964a096ef17326a95b6e9a7738e08911eda3414fef584e +size 33296 diff --git a/detail_png/Shaft_04713_diam.png b/detail_png/Shaft_04713_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..84998ff34639f08b5fc11d79ddfbcbad9e3001a6 --- /dev/null +++ b/detail_png/Shaft_04713_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e857b3579ed4174f508729bdec7d7c621b1878d3d746ece6f27dfed3116a3f6 +size 30533 diff --git a/detail_png/Shaft_04713_length.png b/detail_png/Shaft_04713_length.png new file mode 100644 index 0000000000000000000000000000000000000000..202a3a58f1b0835c35931f50b7a7c83ab9a44165 --- /dev/null +++ b/detail_png/Shaft_04713_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:236abf88f24faaba79894519b659866693b81f1891cbd19e48b8184b089018fa +size 31718 diff --git a/detail_png/Shaft_04713_title.png b/detail_png/Shaft_04713_title.png new file mode 100644 index 0000000000000000000000000000000000000000..95dbdad93db7cb6cdd54402a67075ad5a7100ce6 --- /dev/null +++ b/detail_png/Shaft_04713_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51396cf13af4a817be9fb5819bf17998f98dde780cdc146ff6a42ff9c5c06e97 +size 34223 diff --git a/detail_png/Shaft_04715_diam.png b/detail_png/Shaft_04715_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7edb1862f188c0a867b77e2f6edf59f39c322501 --- /dev/null +++ b/detail_png/Shaft_04715_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:477c076d386e7f2ee63f576989ac746d8df76583fc6dd9345bb96613ee3a2092 +size 29105 diff --git a/detail_png/Shaft_04715_length.png b/detail_png/Shaft_04715_length.png new file mode 100644 index 0000000000000000000000000000000000000000..55c0a95e998ecd1d770f9e6c73d8ed5a41dc6f74 --- /dev/null +++ b/detail_png/Shaft_04715_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68154a6cfc60a1ce07cd9f7b651c70deb54a167f9100d8b7a9b9c62b4e046145 +size 30441 diff --git a/detail_png/Shaft_04715_title.png b/detail_png/Shaft_04715_title.png new file mode 100644 index 0000000000000000000000000000000000000000..836d1792d82d5b480b0091a3d2fe51c75819564d --- /dev/null +++ b/detail_png/Shaft_04715_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:932ea6123b623b8a85f8638d471b68d402a00de46b1d4d6ad20ce9700c6397b7 +size 33997 diff --git a/detail_png/Shaft_04718_diam.png b/detail_png/Shaft_04718_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ea8c91da8848ae649e67299b492664734aa93525 --- /dev/null +++ b/detail_png/Shaft_04718_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8921a2f01f3cf17a367d5aa758a6785830c1ce88e026c0014a639e6e1b80bb25 +size 33887 diff --git a/detail_png/Shaft_04718_length.png b/detail_png/Shaft_04718_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8bdb20e2475d8ba480234019419f2eed1e25fe73 --- /dev/null +++ b/detail_png/Shaft_04718_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c2f9c881b91a87a763131f011ebb3d80ad1e5c23a1ab571e5d26dbc34ce3c1c +size 24480 diff --git a/detail_png/Shaft_04718_title.png b/detail_png/Shaft_04718_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4390ea91a1666724bbd527ed9bc7d85e1e73b701 --- /dev/null +++ b/detail_png/Shaft_04718_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ca3cd0b996a5c0f78033a213b0cd46db38a25a51e61ffb342df54bbc827de98 +size 18780 diff --git a/detail_png/Shaft_04720_diam.png b/detail_png/Shaft_04720_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a341f24d19bd3623175d125fb3656a57b73aad14 --- /dev/null +++ b/detail_png/Shaft_04720_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8dafa415311d59b97b138ac24f33a4e53fdd5282d37972e9bfe390239dd609e +size 19906 diff --git a/detail_png/Shaft_04720_length.png b/detail_png/Shaft_04720_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9e94b56f355501e975e72b628e6fcd62ac0d68b5 --- /dev/null +++ b/detail_png/Shaft_04720_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a96de247504765946183260990e7a75cc25fba783c0b287eaa9b96cc214a6d40 +size 15088 diff --git a/detail_png/Shaft_04720_title.png b/detail_png/Shaft_04720_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c09f36bdfd9abe4f9983b19b1a9d4dcfc82514ae --- /dev/null +++ b/detail_png/Shaft_04720_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4078e6d4ff36117a18ae3376b7e91073f2c7684ae8f09730492c4b7dc02463c8 +size 15127 diff --git a/detail_png/Shaft_04723_diam.png b/detail_png/Shaft_04723_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0819b6bd828264e8e61c6ebfcee89e971897d202 --- /dev/null +++ b/detail_png/Shaft_04723_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:450b39a2d768766f4f6f040d0dd8c86d9a01dae43ad009a412c02b810dc278f5 +size 20581 diff --git a/detail_png/Shaft_04723_length.png b/detail_png/Shaft_04723_length.png new file mode 100644 index 0000000000000000000000000000000000000000..df65063822540f0081343cc1ca685210297dd066 --- /dev/null +++ b/detail_png/Shaft_04723_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0174decb69e66c9662466c229ca7958e85448134548f0e92dddf4bf56ffabee6 +size 16539 diff --git a/detail_png/Shaft_04723_title.png b/detail_png/Shaft_04723_title.png new file mode 100644 index 0000000000000000000000000000000000000000..607c1d44987d8e1e84239aee077d58dea46e430b --- /dev/null +++ b/detail_png/Shaft_04723_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87c850428729e9c46179b5b97fad0d66fdd414e06d7e9fa67c0067ee3c39b9d6 +size 18752 diff --git a/detail_png/Shaft_04724_diam.png b/detail_png/Shaft_04724_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d29cd3d03b3ed753949881074827902be448d22a --- /dev/null +++ b/detail_png/Shaft_04724_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8fc661d1b338a94d7e7ac9e9bef66c8b76d8456072e90a06f368af719109f2c +size 34493 diff --git a/detail_png/Shaft_04724_length.png b/detail_png/Shaft_04724_length.png new file mode 100644 index 0000000000000000000000000000000000000000..75bec6c7fd64c9e0356b8dd5516b39f1e04b2503 --- /dev/null +++ b/detail_png/Shaft_04724_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a53a75d9977557c40e98a4553a2716f2174d83cdbe8303a8843718a6d6d84044 +size 33417 diff --git a/detail_png/Shaft_04724_title.png b/detail_png/Shaft_04724_title.png new file mode 100644 index 0000000000000000000000000000000000000000..36e3bb148aa5fa4e0ee1736a0f52d26a7bdfed8e --- /dev/null +++ b/detail_png/Shaft_04724_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdd08b6254b59252aa99c4dfae71265bf42f117ab84f949a935b18537e9e0052 +size 34040 diff --git a/detail_png/Shaft_04725_diam.png b/detail_png/Shaft_04725_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7dc60fa391434aa2728e44dda58b89bd5b2089b1 --- /dev/null +++ b/detail_png/Shaft_04725_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:676ba62386d01696f1f019051cde00a8edac7370f534b0ee59be0c69f9b74c82 +size 36694 diff --git a/detail_png/Shaft_04725_length.png b/detail_png/Shaft_04725_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7baa0dd167432f23061f828431107a392a89d0c9 --- /dev/null +++ b/detail_png/Shaft_04725_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12825f38a9d6b37e0d37d9bc49992756e1154bd7cfbe069cb915aebe49fbce64 +size 37501 diff --git a/detail_png/Shaft_04725_title.png b/detail_png/Shaft_04725_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d5667bcbfab0a4751d2e2c89ea8a73c8de5cd8bc --- /dev/null +++ b/detail_png/Shaft_04725_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3463c9afbece930488600b0f038232a3975835b0c23f03f16f56982494c7f2bc +size 28333 diff --git a/detail_png/Shaft_04728_diam.png b/detail_png/Shaft_04728_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..02b4cc6e238f24c59462f657edd0b65eafec8af2 --- /dev/null +++ b/detail_png/Shaft_04728_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1da58ed0492f7802879886e225759f41e042765e22d4f5286d8f15eb748f9a78 +size 25477 diff --git a/detail_png/Shaft_04728_length.png b/detail_png/Shaft_04728_length.png new file mode 100644 index 0000000000000000000000000000000000000000..14f28d2aaa599d77d10f63fcd36782f0ae9daa6c --- /dev/null +++ b/detail_png/Shaft_04728_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b885a8313ec354248738ae1362192818c57475c8e4080fd320dc1a66d11474ae +size 34395 diff --git a/detail_png/Shaft_04728_title.png b/detail_png/Shaft_04728_title.png new file mode 100644 index 0000000000000000000000000000000000000000..5a5436f9adff262edb1c48c2daf839b5e340f491 --- /dev/null +++ b/detail_png/Shaft_04728_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b38171f6d716b068bf23f2aeefabd38ac38f7203187788553eb2254325da7d41 +size 31958 diff --git a/detail_png/Shaft_04730_diam.png b/detail_png/Shaft_04730_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0c559f6080c0c7e7832f4449b049b7117f6c83ea --- /dev/null +++ b/detail_png/Shaft_04730_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb729913a531f8551d8992f9188f7dcebbb7b6eb8cae545b74fae252d03ff3f1 +size 23363 diff --git a/detail_png/Shaft_04730_length.png b/detail_png/Shaft_04730_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8b59d5f8971ce14fbe1998f82a88923909e4bff4 --- /dev/null +++ b/detail_png/Shaft_04730_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66d5e0177594dd6dd611ab030a1f1043681c765c4d7959a9a83afe70f531a6e4 +size 21746 diff --git a/detail_png/Shaft_04730_title.png b/detail_png/Shaft_04730_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f7383a18baea8d40c7d9c3b0bcce3718baf1f5c1 --- /dev/null +++ b/detail_png/Shaft_04730_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f2dcfde891dc6c91e9f83016129bd019e860e58ca4b31156b09b8ff444f986d +size 29981 diff --git a/detail_png/Shaft_04732_diam.png b/detail_png/Shaft_04732_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b0725268ae2c9b9bf0cc7a36dbb1cc31496c40bf --- /dev/null +++ b/detail_png/Shaft_04732_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27ca99be2bef6f9d5f0f080882fc9e7c2f9cbd1da966f42064491419333dee6d +size 19068 diff --git a/detail_png/Shaft_04732_length.png b/detail_png/Shaft_04732_length.png new file mode 100644 index 0000000000000000000000000000000000000000..97a2f0009fbd861647c9dcc11a549896a8d9d40c --- /dev/null +++ b/detail_png/Shaft_04732_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2bf6e940416132657c2f125985d84b717fdeb8b80426e2abd7d7ca9a0a5d8c1 +size 14676 diff --git a/detail_png/Shaft_04732_title.png b/detail_png/Shaft_04732_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2becb46bcc757e27401c43050f68913c802d36be --- /dev/null +++ b/detail_png/Shaft_04732_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:567fe1b4bf597bfcd2b3ca2ca25ea2568953cf3cc607f742d8b545d7bcc69e03 +size 18358 diff --git a/detail_png/Shaft_04736_diam.png b/detail_png/Shaft_04736_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4a64d0763faadf24ba41197f4e81a91f3c102b37 --- /dev/null +++ b/detail_png/Shaft_04736_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48895f2c5b1790154b6a5849c6ef0cda7ecb7a508a7b2d339d653d22897f0f5e +size 33753 diff --git a/detail_png/Shaft_04736_length.png b/detail_png/Shaft_04736_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d1031ebe42931bf0f959fbe7f743a6711cef29a4 --- /dev/null +++ b/detail_png/Shaft_04736_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d33da1f0385b8520566606d620a1d26262ef3e5cb58c47f716dfe19e38061319 +size 46200 diff --git a/detail_png/Shaft_04736_title.png b/detail_png/Shaft_04736_title.png new file mode 100644 index 0000000000000000000000000000000000000000..966fbe0b61e8cb3203de4aa19e175a9e9326e2b0 --- /dev/null +++ b/detail_png/Shaft_04736_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6e8a4e60bb377b8330643d7a87b436a3549ba6736e1c8fc7d8ca1709f70a753 +size 30267 diff --git a/detail_png/Shaft_04739_diam.png b/detail_png/Shaft_04739_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f526a7a0594a9f226adde3bf6cce624a169d573e --- /dev/null +++ b/detail_png/Shaft_04739_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fd2614cdbee49f904b7b5bc1245a83337c049de59fa7c6954e799e0cb6786a8 +size 20032 diff --git a/detail_png/Shaft_04739_length.png b/detail_png/Shaft_04739_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7f23e3e0f2ac79751cf07912387f7f353593227b --- /dev/null +++ b/detail_png/Shaft_04739_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b0f495db3ef82c04ab3abdf19466c8351e94948dd93bbfd99ec522337f2319e +size 15156 diff --git a/detail_png/Shaft_04739_title.png b/detail_png/Shaft_04739_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c2bf51e9d7e088d913793fba9b69df6aaad9c512 --- /dev/null +++ b/detail_png/Shaft_04739_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f337a65d0244d352e8cccae1fd11b61a9d574d8a7fbe8ae24d54cc541eedee9 +size 18768 diff --git a/detail_png/Shaft_04742_diam.png b/detail_png/Shaft_04742_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d57a59b1c9163bbfce89433ca4bb1b9a5cdf5228 --- /dev/null +++ b/detail_png/Shaft_04742_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d089d9aa7ff899a4b4f49097dc65f401b4ccf64bfcc3ceb5e06e4675775ea142 +size 20436 diff --git a/detail_png/Shaft_04742_length.png b/detail_png/Shaft_04742_length.png new file mode 100644 index 0000000000000000000000000000000000000000..182f545a823d2c7c3c6e28f6c91ab9371e9a9d89 --- /dev/null +++ b/detail_png/Shaft_04742_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae3313f139a0b49881b84ea3f906b48f843919568210fb2f219e57f1aaa6daa5 +size 15991 diff --git a/detail_png/Shaft_04742_title.png b/detail_png/Shaft_04742_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b54d89d6786070548f7f5bfa38f7249ed0b9c4f0 --- /dev/null +++ b/detail_png/Shaft_04742_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e4402f6383796e99d8d35f464f6bcc8012d36ab6101a0608b8d81d616f1d2cb +size 22846 diff --git a/detail_png/Shaft_04746_diam.png b/detail_png/Shaft_04746_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..735dbf1fb940a4f9ff4d5a7ebce9394514443ddf --- /dev/null +++ b/detail_png/Shaft_04746_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0397e727d2d54ff6055830e049a3f7c9355b1de79d2845dfa9f7e6d8a4812160 +size 24648 diff --git a/detail_png/Shaft_04746_length.png b/detail_png/Shaft_04746_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b10948c4cee939dd661e79938416ead1e290337d --- /dev/null +++ b/detail_png/Shaft_04746_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aef1fa8cca2082d88c0bc973d7711e5245d7cb452a78d0c651ec672608b8d532 +size 30461 diff --git a/detail_png/Shaft_04746_title.png b/detail_png/Shaft_04746_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9362659592cd5dd05c36d1750f2ab89551b17d6f --- /dev/null +++ b/detail_png/Shaft_04746_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa2143fff9397eaa798e4a81053c49f53c83dfb1be8e033644f66f0fb1f3be9e +size 31600 diff --git a/detail_png/Shaft_04750_diam.png b/detail_png/Shaft_04750_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1a48f63777e5aa50aa0436432129f1553b4acb5a --- /dev/null +++ b/detail_png/Shaft_04750_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aca3e00c664718903634520d40265883eece4778486efab61325e0f43d7325b6 +size 25315 diff --git a/detail_png/Shaft_04750_length.png b/detail_png/Shaft_04750_length.png new file mode 100644 index 0000000000000000000000000000000000000000..44d6313c2e37b5e9d2ba59e6c65e6200e257cef9 --- /dev/null +++ b/detail_png/Shaft_04750_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d45d05dd64e56f3fcc5bebd13c8f55c3f97cbc4b9df2dd659a5ebde3b3b24148 +size 20135 diff --git a/detail_png/Shaft_04750_title.png b/detail_png/Shaft_04750_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3142d9675f32954ccc4c68b5379dec358580db76 --- /dev/null +++ b/detail_png/Shaft_04750_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:371c7ae422410ce7c4c0920f5fc8f2d492954894747d86e341770470d5676d37 +size 16410 diff --git a/detail_png/Shaft_04751_diam.png b/detail_png/Shaft_04751_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..cb7363a58b8c2ae4d4df62510439c36ff6a7f465 --- /dev/null +++ b/detail_png/Shaft_04751_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dde41554d2e0d6b97cf3b5b058de0d18ac9e16274584b3f2458ae92685ffc460 +size 24731 diff --git a/detail_png/Shaft_04751_length.png b/detail_png/Shaft_04751_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a5fb3176eaeb39c1bbf6035564f0d1853a77321f --- /dev/null +++ b/detail_png/Shaft_04751_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00ad27098f89c4d45e57a1d6274edea21edd8c532c0c0a4652e6581d4a48b34a +size 20684 diff --git a/detail_png/Shaft_04751_title.png b/detail_png/Shaft_04751_title.png new file mode 100644 index 0000000000000000000000000000000000000000..71044457e4265bf4311bf120894d443ad908a8ed --- /dev/null +++ b/detail_png/Shaft_04751_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1b3af32dd976771e0de49ced86b05e52835d7d1ef92c78c0c104fc61675b896 +size 18645 diff --git a/detail_png/Shaft_04755_diam.png b/detail_png/Shaft_04755_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1e9e6c817249d7c188a4f113f4f036dfc66cf93c --- /dev/null +++ b/detail_png/Shaft_04755_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:caebfdee2c49f678bcffc9deb549867915b20c6c73d8e343a4538d6c86839a39 +size 20563 diff --git a/detail_png/Shaft_04755_length.png b/detail_png/Shaft_04755_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b450bceca2b98906436584f15cc16b21434beab0 --- /dev/null +++ b/detail_png/Shaft_04755_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7764721dd3c77ec33c86a1f160b630df3c6f5d6d18ec5e860f9502811b21f254 +size 15129 diff --git a/detail_png/Shaft_04755_title.png b/detail_png/Shaft_04755_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2b4d372512cd292a1d59b29021271543e5d12027 --- /dev/null +++ b/detail_png/Shaft_04755_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d53587c5c1367cc10d024d31c88f07efd11da56a9537c42d3b930240faae2e1 +size 16469 diff --git a/detail_png/Shaft_04759_diam.png b/detail_png/Shaft_04759_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c28bf422785620660eb9ca55271e286abb0d1e2a --- /dev/null +++ b/detail_png/Shaft_04759_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3aa16de3f0615e7fe9433cec302aa5dcacf00c4ae647969d50267e5b9590ccf +size 19293 diff --git a/detail_png/Shaft_04759_length.png b/detail_png/Shaft_04759_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8c464da578f3e66fcd79f5f52f7f5f5fcc498919 --- /dev/null +++ b/detail_png/Shaft_04759_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cf9164b20a2f654b4995477c966aeb2f35eb13899fa3009fc735e7451fdc3d0 +size 15493 diff --git a/detail_png/Shaft_04759_title.png b/detail_png/Shaft_04759_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8a535c7a8fd3f51d834bd0cd626a06a6b128e007 --- /dev/null +++ b/detail_png/Shaft_04759_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e37b0e48cad32cdee101d7f28cef0a407fd6e9d24b6dde712ddaf43849a51df +size 15723 diff --git a/detail_png/Shaft_04767_diam.png b/detail_png/Shaft_04767_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8eb054fca9466e43b54e7ef61d4b650977406d09 --- /dev/null +++ b/detail_png/Shaft_04767_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bef29f0feac4379f2fd1f0b4a46d4dfab91f571371b087be9e85e2b4a88624f9 +size 25630 diff --git a/detail_png/Shaft_04767_length.png b/detail_png/Shaft_04767_length.png new file mode 100644 index 0000000000000000000000000000000000000000..df9692d7eb65fc30b40294f19c0276292cf2e5bc --- /dev/null +++ b/detail_png/Shaft_04767_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66c8f664f0e2f8ee3365b390c698c3f74c2081c3ba2e23498ecf644f4860df06 +size 24955 diff --git a/detail_png/Shaft_04767_title.png b/detail_png/Shaft_04767_title.png new file mode 100644 index 0000000000000000000000000000000000000000..629d34cbd9984a28f94b698a4e302279866627fc --- /dev/null +++ b/detail_png/Shaft_04767_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c878c45049affc698050cbacc496146bd7c8c8fe8ca50e97831dab967d8284c +size 32180 diff --git a/detail_png/Shaft_04769_diam.png b/detail_png/Shaft_04769_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b01afcb5470d79785a9fff46f9229e197301c811 --- /dev/null +++ b/detail_png/Shaft_04769_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7dfd845fc756a7b926de11b7d2c6ca5b52dfc3a265203cbce658839cfe69ce00 +size 34201 diff --git a/detail_png/Shaft_04769_length.png b/detail_png/Shaft_04769_length.png new file mode 100644 index 0000000000000000000000000000000000000000..82ec3050b7bde4bf5fca7b2ac463b25528173123 --- /dev/null +++ b/detail_png/Shaft_04769_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fa1361c99a0128e4ba53068205cc56c265265b231f582688e87941f0cc79859 +size 27639 diff --git a/detail_png/Shaft_04769_title.png b/detail_png/Shaft_04769_title.png new file mode 100644 index 0000000000000000000000000000000000000000..d995dfc2dfe48cf2f62f20b8bcf6689f362451c9 --- /dev/null +++ b/detail_png/Shaft_04769_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:399dd49c42b9bc125684345ac7d28134341ab366e20628e1951e85b8d7f3b5fa +size 31071 diff --git a/detail_png/Shaft_04770_diam.png b/detail_png/Shaft_04770_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..826c7f458235a396282cf2ed527b1644e0802f14 --- /dev/null +++ b/detail_png/Shaft_04770_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cd78ab7dc459018dad2237d7ac8dfb20aec1349d4d692cc96980a63c71158f1 +size 18669 diff --git a/detail_png/Shaft_04770_length.png b/detail_png/Shaft_04770_length.png new file mode 100644 index 0000000000000000000000000000000000000000..827d1fdb0f42f8586f4f872a58bc878033fddee0 --- /dev/null +++ b/detail_png/Shaft_04770_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9967473e2cd833b86c88587def4f446cf4995bcad8818b906030070316805be7 +size 17141 diff --git a/detail_png/Shaft_04770_title.png b/detail_png/Shaft_04770_title.png new file mode 100644 index 0000000000000000000000000000000000000000..7e262fd29357af53685875800fe7f5bdeca163ef --- /dev/null +++ b/detail_png/Shaft_04770_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:044d6a36eb7cd1d88e755ed11dde31312402df9d26b0578a0ea8fff57ce3159d +size 18719 diff --git a/detail_png/Shaft_04773_diam.png b/detail_png/Shaft_04773_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0ba35d0a65349716618cf0692e1bf168de593397 --- /dev/null +++ b/detail_png/Shaft_04773_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e9c3407a4a24ecd471f345abdd5bbd2ec9d0bab437a7fbf1d66627159e38de6 +size 23594 diff --git a/detail_png/Shaft_04773_length.png b/detail_png/Shaft_04773_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7ce059cab21dbc059ee0759aa8607b226d7b3fd3 --- /dev/null +++ b/detail_png/Shaft_04773_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:069fe33822b008e57ccd9c72e56204333c9ae1405d5ee137054e841464836bcd +size 22615 diff --git a/detail_png/Shaft_04773_title.png b/detail_png/Shaft_04773_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2069e6030732cc773eda50c925f5f51af4f69ce4 --- /dev/null +++ b/detail_png/Shaft_04773_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c621792d489deabf1c312e4ed63d7235081ecefe4606a46a41333c42fc8e9b9 +size 28624 diff --git a/detail_png/Shaft_04778_diam.png b/detail_png/Shaft_04778_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..da47ec7fae6a734bfa44656a3d4816e49f7d7f7e --- /dev/null +++ b/detail_png/Shaft_04778_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9405464537ec3c75fcf5a262c3c5d826edaa17efbd1f118e6efa3bd19ef704b +size 34061 diff --git a/detail_png/Shaft_04778_length.png b/detail_png/Shaft_04778_length.png new file mode 100644 index 0000000000000000000000000000000000000000..de7d05b791660691715166afec38556b8b0b98bd --- /dev/null +++ b/detail_png/Shaft_04778_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f92da4241b90a59c27fca435684f6c8c3f9619a40ab64011340d1d62a3c5df8a +size 33715 diff --git a/detail_png/Shaft_04778_title.png b/detail_png/Shaft_04778_title.png new file mode 100644 index 0000000000000000000000000000000000000000..969b5a0e6c7fb9f2649b06b488d2a661521fd136 --- /dev/null +++ b/detail_png/Shaft_04778_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcd5a11b8d464b7377d2be45431432086e8e2a9f51bf10f704a2d83557a4aa08 +size 28310 diff --git a/detail_png/Shaft_04779_diam.png b/detail_png/Shaft_04779_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..645e7f1004b0cfcdacfea1f8a7ea9de38c6646eb --- /dev/null +++ b/detail_png/Shaft_04779_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:997e5dd9dcf2306aca814fe26755ff490929bf71a29f90f49bd5eb26962d28e5 +size 27663 diff --git a/detail_png/Shaft_04779_length.png b/detail_png/Shaft_04779_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c02ce6f183ecdae30bc6563da0ddced36ffe4007 --- /dev/null +++ b/detail_png/Shaft_04779_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:828f41e8e3be84fcfddad90980e02fb3e31afe1b13e91bb10d6f53c34de763b2 +size 35525 diff --git a/detail_png/Shaft_04779_title.png b/detail_png/Shaft_04779_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ddd333035ab7966a492193f34b9ebab1bab7062a --- /dev/null +++ b/detail_png/Shaft_04779_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9538421135df0aa79924057945a569df9906fe506e8361cfc4d0173ae175708a +size 28305 diff --git a/detail_png/Shaft_04780_diam.png b/detail_png/Shaft_04780_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..38c283e03467d3f93aa0918c22a4d9d592ac6857 --- /dev/null +++ b/detail_png/Shaft_04780_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc5e6622451e14acc05508cdce69f6870e9c4b031304480460c049dd00a31835 +size 20592 diff --git a/detail_png/Shaft_04780_length.png b/detail_png/Shaft_04780_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0d6e7dc19c3692361a08daec360e52215c33a25f --- /dev/null +++ b/detail_png/Shaft_04780_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d18130da9939676706dbd751698b521773d1874122706927bb581965f7d2c36 +size 23489 diff --git a/detail_png/Shaft_04780_title.png b/detail_png/Shaft_04780_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c3611c3a0e03b1ceb22ebcc19f03795a19604277 --- /dev/null +++ b/detail_png/Shaft_04780_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97a7df712cba77639750a6507d78744a33c6f6f1b0e91ab052e25d95bfeee746 +size 31705 diff --git a/detail_png/Shaft_04785_diam.png b/detail_png/Shaft_04785_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..d12f3e93149b20ecf189132648752adf9237866c --- /dev/null +++ b/detail_png/Shaft_04785_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8af1611235c91f1e520001b22f350ea766888056a5d20ac6b91d767f9636489 +size 24713 diff --git a/detail_png/Shaft_04785_length.png b/detail_png/Shaft_04785_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d5cbc9b9a6af6e574e8e470429d3f47b694c2c5a --- /dev/null +++ b/detail_png/Shaft_04785_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8473100c79d35f34f1d4d5df6d4ed6f24bc9c2501855d0e693c06dfbc92a2bb1 +size 18338 diff --git a/detail_png/Shaft_04785_title.png b/detail_png/Shaft_04785_title.png new file mode 100644 index 0000000000000000000000000000000000000000..820da3588a2b4df21817ba91c0b76f12f7b68538 --- /dev/null +++ b/detail_png/Shaft_04785_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15b251ace2ce1c0b44d3aa9914e71f95b7f8e7761e0a0bad863f6a02c6733fc9 +size 22199 diff --git a/detail_png/Shaft_04786_diam.png b/detail_png/Shaft_04786_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0983e3e0960ca5fd31f32c5d047b4cc58306724e --- /dev/null +++ b/detail_png/Shaft_04786_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81d17126054fde43dcca4e95e9a12f2e8b08d0af43348ca9716764a440cc69b4 +size 29065 diff --git a/detail_png/Shaft_04786_length.png b/detail_png/Shaft_04786_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c96b323b3241e41c2a9120603884c248ba92e960 --- /dev/null +++ b/detail_png/Shaft_04786_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d0f554994ae3df2c5a78f4d4427b10227451f000ef2b0b633711404088f6eaf +size 23261 diff --git a/detail_png/Shaft_04786_title.png b/detail_png/Shaft_04786_title.png new file mode 100644 index 0000000000000000000000000000000000000000..33fa28940e6f6c672a00b99e6951f63ed9ff85b0 --- /dev/null +++ b/detail_png/Shaft_04786_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e414101f81640cf21936bf9f5378a8672e91dfb5c3780c8cd342e10ce90676ec +size 20677 diff --git a/detail_png/Shaft_04793_diam.png b/detail_png/Shaft_04793_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c101fe698ab57bf8faf80e8225a1a2ca5137960c --- /dev/null +++ b/detail_png/Shaft_04793_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:909fc2af4574af5a8d10dcc08cd07dd8cc65e4b3841ef0d832a1984a1e3ed955 +size 20338 diff --git a/detail_png/Shaft_04793_length.png b/detail_png/Shaft_04793_length.png new file mode 100644 index 0000000000000000000000000000000000000000..106d13a4b47d20f97bcec5b4fbb045b7e89b2946 --- /dev/null +++ b/detail_png/Shaft_04793_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8410892e0708e0b8898725fa9ef8fdc0584f9b79233e209790b68a4040b44d5 +size 20102 diff --git a/detail_png/Shaft_04793_title.png b/detail_png/Shaft_04793_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f339476766ad20be3a0bd40377ab65c0d253f5bd --- /dev/null +++ b/detail_png/Shaft_04793_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6a51f8efdf4e742a49c70a7585c0207d8eb962dd83bf52c3bee3f89fcde61e2 +size 29337 diff --git a/detail_png/Shaft_04796_diam.png b/detail_png/Shaft_04796_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..f8652a13af1ebbfdf480d1ee355eaf97fc51dcfe --- /dev/null +++ b/detail_png/Shaft_04796_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69aecfe8214133ac5293dcd463c7b61c835fa392c376f762c1fa00becea6dc2c +size 37248 diff --git a/detail_png/Shaft_04796_length.png b/detail_png/Shaft_04796_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5e9c19bc0ce6e7b489b83efd3203c4e29522b6ba --- /dev/null +++ b/detail_png/Shaft_04796_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86e43e3eab1fbc420a30a2c34db8e538f8cdc6da33bf48a9be04c97c255c59b3 +size 51932 diff --git a/detail_png/Shaft_04796_title.png b/detail_png/Shaft_04796_title.png new file mode 100644 index 0000000000000000000000000000000000000000..001b5836579ce9f803296fd16c77d89ea03dce7b --- /dev/null +++ b/detail_png/Shaft_04796_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81eb614ecab792c572e4eb459d1036736350ab051e2ee9c4ebab06ceb84855a8 +size 32876 diff --git a/detail_png/Shaft_04802_diam.png b/detail_png/Shaft_04802_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8c14c5ff4489e01452113aeb75253a1f7b8981dc --- /dev/null +++ b/detail_png/Shaft_04802_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:610f891b2f923a90c28ffe90710d21b732b1f338626a996ebf1d62639222c0a1 +size 20685 diff --git a/detail_png/Shaft_04802_length.png b/detail_png/Shaft_04802_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8786d0a1368c649b27eba014eb6e9193ff5cbcc3 --- /dev/null +++ b/detail_png/Shaft_04802_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53874dc325e2bf4484283c83b35d307345dfd478fadf77667cb2797e229022c2 +size 18777 diff --git a/detail_png/Shaft_04802_title.png b/detail_png/Shaft_04802_title.png new file mode 100644 index 0000000000000000000000000000000000000000..42e40e48aeb4e7ca64f1c0ab1d281a64699f33a4 --- /dev/null +++ b/detail_png/Shaft_04802_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:832e65a94c85e6f54cba69dfa566c6a167770643c0dc24dcc95765d8c09f44a2 +size 22652 diff --git a/detail_png/Shaft_04814_diam.png b/detail_png/Shaft_04814_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ea62b50aa416b0167cbb122d5bee4f657f17cd6e --- /dev/null +++ b/detail_png/Shaft_04814_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1d7969e14a726c3385815d801f106fd724304c1b761607de4a45911d1eb5bac +size 26102 diff --git a/detail_png/Shaft_04814_length.png b/detail_png/Shaft_04814_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8911cef38a578b34b796c35a010e27e72735ae9d --- /dev/null +++ b/detail_png/Shaft_04814_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6dcd7551b435c81d303ea3293ff5916dc92bd42786cac66fd19d1e972d60cac +size 26397 diff --git a/detail_png/Shaft_04814_title.png b/detail_png/Shaft_04814_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f58b897654963bcca83de0dedef3d1245e148787 --- /dev/null +++ b/detail_png/Shaft_04814_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1724cc793fb25343d5f8ea48fd1a67611a8982bc4ee125532ca73cad28fac8dc +size 30756 diff --git a/detail_png/Shaft_04816_diam.png b/detail_png/Shaft_04816_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e44d27c60716a8c6db38f01a2f71bdfe480b35c2 --- /dev/null +++ b/detail_png/Shaft_04816_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27458c1981948bc16b0b58e2daa6bf172dd941cd5ee98a50aefbea520d1e5ae0 +size 26315 diff --git a/detail_png/Shaft_04816_length.png b/detail_png/Shaft_04816_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d035befa6008394f2d57db1a9841c4e2402655f1 --- /dev/null +++ b/detail_png/Shaft_04816_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23f53914b0edaa27dea2f9d88079beab4b801dab5c53909f4b0aaca2d728b369 +size 37787 diff --git a/detail_png/Shaft_04816_title.png b/detail_png/Shaft_04816_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2778c68823c425621cce4abf0805a8efbad89a7f --- /dev/null +++ b/detail_png/Shaft_04816_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a070183e247418c688d10f0e38beb942a9809e356b72286f6a9bbff5f8029ef +size 30013 diff --git a/detail_png/Shaft_04817_diam.png b/detail_png/Shaft_04817_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..2469e6cb0eb188c6f4971b40ce8e4ae054aa21c3 --- /dev/null +++ b/detail_png/Shaft_04817_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d3a0ac3b919149e6c024320417a1cab41d3dde5ae069bb814feb52a342e6720 +size 24860 diff --git a/detail_png/Shaft_04817_length.png b/detail_png/Shaft_04817_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9a45c2a14b5631f3dde5323b86a1d033414cea87 --- /dev/null +++ b/detail_png/Shaft_04817_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:badbf6e051e60458abec176f42811f4d1ee0825a18a3eb79caf1baf7334bd7ce +size 21824 diff --git a/detail_png/Shaft_04817_title.png b/detail_png/Shaft_04817_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4afba7531718e026b1d4e17a3632c1b6d75fd42e --- /dev/null +++ b/detail_png/Shaft_04817_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ade236cd169189d99e5ba5e0f21557cab7c84ef24b0c85762b750679398c73d +size 23863 diff --git a/detail_png/Shaft_04820_diam.png b/detail_png/Shaft_04820_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7b8ff145fad0ecdac488006b6554677234060000 --- /dev/null +++ b/detail_png/Shaft_04820_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbcecc9d87b85ae2cd0d309ed0248ffab11d8e04fb6d8e0de01be04ae858f7c5 +size 29862 diff --git a/detail_png/Shaft_04820_length.png b/detail_png/Shaft_04820_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a568df54f0b9ae87e9dfda423161fd0ba5516e9e --- /dev/null +++ b/detail_png/Shaft_04820_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d049792721214889a3b0f2a501b7eaeba4947c652bae7caf1499beba8b5deb40 +size 26142 diff --git a/detail_png/Shaft_04820_title.png b/detail_png/Shaft_04820_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bf37924fc86bbb146fdd64211293dbad89326698 --- /dev/null +++ b/detail_png/Shaft_04820_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7816ef7510f58dc07ee9194fb537e10284c89bf16617781c20bffce10fe624e8 +size 25194 diff --git a/detail_png/Shaft_04822_diam.png b/detail_png/Shaft_04822_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..5606390c8c889beca4bf9bcd4399a8e3a4d84e44 --- /dev/null +++ b/detail_png/Shaft_04822_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aae4b61097d900e1907299ad757eeb8a30aa2b8e4a212d0b6f3542b3b1d2ffbb +size 33597 diff --git a/detail_png/Shaft_04822_length.png b/detail_png/Shaft_04822_length.png new file mode 100644 index 0000000000000000000000000000000000000000..83b60a530e9a3654adb209bd0fe11d140db1d6f8 --- /dev/null +++ b/detail_png/Shaft_04822_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ee28b9c10c16dfc8a9c871f977585fb1f10cb358a444b1617a741402197bd70 +size 46287 diff --git a/detail_png/Shaft_04822_title.png b/detail_png/Shaft_04822_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ca50d508b756b9da4cae7c4c659532ad7aa3066a --- /dev/null +++ b/detail_png/Shaft_04822_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d1a1e36a00c2b2bb68b7bff7d32ca820a4888313d2638f463ba92ff625e95c7 +size 35875 diff --git a/detail_png/Shaft_04823_diam.png b/detail_png/Shaft_04823_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..713abfec20874c94e4f2da5f6654ea1e78d5ce5b --- /dev/null +++ b/detail_png/Shaft_04823_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d187df491447c9fdf85c8d4c5a4721a94f8785c02b6a8cfd40d1d357a1bb2d6 +size 29359 diff --git a/detail_png/Shaft_04823_length.png b/detail_png/Shaft_04823_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f22e7b098706048e21664f4b8cc505c0fde3a00f --- /dev/null +++ b/detail_png/Shaft_04823_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:423338a6b57d845c8947ee1b05b84edc27b72dfe1971e3f39b5736ca8c671adc +size 28337 diff --git a/detail_png/Shaft_04823_title.png b/detail_png/Shaft_04823_title.png new file mode 100644 index 0000000000000000000000000000000000000000..08a6c4ba931ab508215afc40a35193fa8ee92a3e --- /dev/null +++ b/detail_png/Shaft_04823_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8e688060f4bb5fc930579b5b2612742047662684e6c640c05845b7f6d7ce6fd +size 32431 diff --git a/detail_png/Shaft_04834_diam.png b/detail_png/Shaft_04834_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..62dc769e8f39b876e42e39b629dd82b268c71fab --- /dev/null +++ b/detail_png/Shaft_04834_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:192f5928508796c4d3d2ecade288b9200c4a85a27abc47135f54bd4822436e42 +size 27476 diff --git a/detail_png/Shaft_04834_length.png b/detail_png/Shaft_04834_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5287cfda56fe19c23676b0264c88010f32f6b35d --- /dev/null +++ b/detail_png/Shaft_04834_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1795e85acdaa81ece15a4fe75774547c13c213ab907d359ccfbbbfa90722b690 +size 37211 diff --git a/detail_png/Shaft_04834_title.png b/detail_png/Shaft_04834_title.png new file mode 100644 index 0000000000000000000000000000000000000000..141c31baf0e84b16e669258430619e7438238bce --- /dev/null +++ b/detail_png/Shaft_04834_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:901fd5f8ddd893540558b29c28fa56e3a7edbdc8045ecebe74f3c8bee30fa99a +size 30284 diff --git a/detail_png/Shaft_04835_diam.png b/detail_png/Shaft_04835_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..931de4e8c4cb4211c12d836d9b173cf4608a99f6 --- /dev/null +++ b/detail_png/Shaft_04835_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7b75283c18b9edf83ff86590876883f01c1103dfa38193cabe4110da8bb16e8 +size 20387 diff --git a/detail_png/Shaft_04835_length.png b/detail_png/Shaft_04835_length.png new file mode 100644 index 0000000000000000000000000000000000000000..4a1bb6249d22ef6af39d7c5a3134771bc97db49e --- /dev/null +++ b/detail_png/Shaft_04835_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed809aa794dcbab6818432d4ee2e6d96fa19322b60b9a72ef140a8f0d0d81183 +size 18329 diff --git a/detail_png/Shaft_04835_title.png b/detail_png/Shaft_04835_title.png new file mode 100644 index 0000000000000000000000000000000000000000..29b17f282c8cdb758ad6ba21bbe139040a3e7536 --- /dev/null +++ b/detail_png/Shaft_04835_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09586f601fa63c1e9bebefb84f2b9ec51868b437f25ec9e5983b4fd192c11852 +size 22217 diff --git a/detail_png/Shaft_04836_diam.png b/detail_png/Shaft_04836_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48759e4a155da8e961f87da436063c5ab549199f --- /dev/null +++ b/detail_png/Shaft_04836_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95df17751aab911a1cce7168f03200455ee7fb4fbe7ed624b6ce48c7e3f29f0f +size 18862 diff --git a/detail_png/Shaft_04836_length.png b/detail_png/Shaft_04836_length.png new file mode 100644 index 0000000000000000000000000000000000000000..b1668049366b02b2cc20a4a7678f40b5a2a52035 --- /dev/null +++ b/detail_png/Shaft_04836_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4b0a25855d1d39be2641e8d5854a50da80302cd396ff26465f03640a6400c7d +size 17695 diff --git a/detail_png/Shaft_04836_title.png b/detail_png/Shaft_04836_title.png new file mode 100644 index 0000000000000000000000000000000000000000..4828af67e51fe095e96d9d84ec5a88f7c692e021 --- /dev/null +++ b/detail_png/Shaft_04836_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab1bbc69040df80ee0c6973cfea25fbf7659afbf77c3165bd2ebf7f65d42bc73 +size 16457 diff --git a/detail_png/Shaft_04838_diam.png b/detail_png/Shaft_04838_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e246ed07b92aedb083d2258d9dec8c81254c8b2e --- /dev/null +++ b/detail_png/Shaft_04838_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ff4ca535584a69bf448eaae5bbaba5bea1aa57c342c8aa23c68f691ac6a5766 +size 37775 diff --git a/detail_png/Shaft_04838_length.png b/detail_png/Shaft_04838_length.png new file mode 100644 index 0000000000000000000000000000000000000000..52e0a84a3e07a15bb667895b02dc5c882f1be3c3 --- /dev/null +++ b/detail_png/Shaft_04838_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3896d713c27dc2f5d4443f432075608786b5f177acf870bef9e6c60e3f2ada80 +size 47001 diff --git a/detail_png/Shaft_04838_title.png b/detail_png/Shaft_04838_title.png new file mode 100644 index 0000000000000000000000000000000000000000..de31e4e8303ce266d35c396b7129b2270e9dc3d3 --- /dev/null +++ b/detail_png/Shaft_04838_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcbe70f22a6bc298c30dfef9f34f99f049d4751e984ffb578871ea313f6faf48 +size 30394 diff --git a/detail_png/Shaft_04839_diam.png b/detail_png/Shaft_04839_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..36d9a7711ccfcb1d938302e2cd7c9d5d4abe8bcb --- /dev/null +++ b/detail_png/Shaft_04839_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51fac80e6ca633d081edfaa1e74de2511ee9e6b30f37ad406021502cc6757d12 +size 19785 diff --git a/detail_png/Shaft_04839_length.png b/detail_png/Shaft_04839_length.png new file mode 100644 index 0000000000000000000000000000000000000000..c35a3f51dff987aa23de91612eaebd1c1245dcd0 --- /dev/null +++ b/detail_png/Shaft_04839_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0938c624772c4c54f839cac3c25298f069559e045884a228c0906ced75e4911c +size 16163 diff --git a/detail_png/Shaft_04839_title.png b/detail_png/Shaft_04839_title.png new file mode 100644 index 0000000000000000000000000000000000000000..b79049f05d804b5e64ce47254338b40ce1344f57 --- /dev/null +++ b/detail_png/Shaft_04839_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b41660666555be73a916dbb1e5c9a9ba22b55757383bb8a5c7430812c9762c9 +size 16354 diff --git a/detail_png/Shaft_04844_diam.png b/detail_png/Shaft_04844_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..80a05983789a4bef3603a1ce5a06287810ce3797 --- /dev/null +++ b/detail_png/Shaft_04844_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c48d698c6b1c56fad10c18381c8bac94f2070e5d07f1074619102ff376e8309 +size 26964 diff --git a/detail_png/Shaft_04844_length.png b/detail_png/Shaft_04844_length.png new file mode 100644 index 0000000000000000000000000000000000000000..5a43927ed883484d36e354a6b2158d9109b0be5d --- /dev/null +++ b/detail_png/Shaft_04844_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:359c8ab7b272f8ce3fa049808bb3bfbddf21ec9dcc421e306f0a57087498a033 +size 36513 diff --git a/detail_png/Shaft_04844_title.png b/detail_png/Shaft_04844_title.png new file mode 100644 index 0000000000000000000000000000000000000000..874acab336a9e4c435499d6450cea04722f6804e --- /dev/null +++ b/detail_png/Shaft_04844_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62ffb5ba748c5389645ecfc8f03fe6751dff66fb80e9a24f00ada7346962b8b8 +size 31681 diff --git a/detail_png/Shaft_04851_diam.png b/detail_png/Shaft_04851_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e39d5d26b8cd607d63ce45cc25da932b75ca5333 --- /dev/null +++ b/detail_png/Shaft_04851_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64bbc120db4dfac86b805061164813692ec0424f9b9ea30d5bfe0d81673654ab +size 26317 diff --git a/detail_png/Shaft_04851_length.png b/detail_png/Shaft_04851_length.png new file mode 100644 index 0000000000000000000000000000000000000000..825327c86f103390b9530fc53848d0766313fef7 --- /dev/null +++ b/detail_png/Shaft_04851_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fe5720f1b08c05d003820cdd85ccf1120f709009c6ca5bee57abfee81a2ce4e +size 22072 diff --git a/detail_png/Shaft_04851_title.png b/detail_png/Shaft_04851_title.png new file mode 100644 index 0000000000000000000000000000000000000000..fdb90388b639724ff67a8d743a08967221448fd7 --- /dev/null +++ b/detail_png/Shaft_04851_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9340af1c3a4d23f376efd167c4d0c7b26d26a57ba5372f1b3e741691de11dda1 +size 22032 diff --git a/detail_png/Shaft_04853_diam.png b/detail_png/Shaft_04853_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..457be536f6b1da145e211af6e6d68e20dd827c7e --- /dev/null +++ b/detail_png/Shaft_04853_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1cb45c1887bfdeea922a04991d442f5ec12d46ee8baf327c2807b8b79ba3ee0 +size 20223 diff --git a/detail_png/Shaft_04853_length.png b/detail_png/Shaft_04853_length.png new file mode 100644 index 0000000000000000000000000000000000000000..73b77d198e97f445f2ec3bb857b4074166eefe88 --- /dev/null +++ b/detail_png/Shaft_04853_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7583b592b5614ef29f11cae6070e99713b8467d48f4c0a001f137e9c7b990ae0 +size 18211 diff --git a/detail_png/Shaft_04853_title.png b/detail_png/Shaft_04853_title.png new file mode 100644 index 0000000000000000000000000000000000000000..aad4f3b6acda33710610ba9c619225c2406cd7e6 --- /dev/null +++ b/detail_png/Shaft_04853_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:115ca26903679d731632c3ea56adf3fbe9b7121d01f8b7466e9a93f66a5333bb +size 26764 diff --git a/detail_png/Shaft_04866_diam.png b/detail_png/Shaft_04866_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3197ac78c333dc4e26e56f178b514be46139e03a --- /dev/null +++ b/detail_png/Shaft_04866_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfbd40855c3ccf0906b968f15971632e2de84b1861c59e493cee214d9b2bdafe +size 20390 diff --git a/detail_png/Shaft_04866_length.png b/detail_png/Shaft_04866_length.png new file mode 100644 index 0000000000000000000000000000000000000000..907394fb35552f3f6b7e96749b4c1e39d5f49735 --- /dev/null +++ b/detail_png/Shaft_04866_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3a28c8f85e70af30a6dcbcef9a621e8fd78e19594bbe4b8b4c2a0a56a5ba1a6 +size 15736 diff --git a/detail_png/Shaft_04866_title.png b/detail_png/Shaft_04866_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dbc1a175afd3ad9ed4a78f0f60fe80ee2046843a --- /dev/null +++ b/detail_png/Shaft_04866_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb14753a1b35c2e0d89fdcdbf41aab3119aa1def371af9c01eda446e07db0e27 +size 15459 diff --git a/detail_png/Shaft_04874_diam.png b/detail_png/Shaft_04874_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..50899d1eeab7e81b73b758e2a0647fabe741e0d5 --- /dev/null +++ b/detail_png/Shaft_04874_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b25722ca234c80afe4d1a501a03edc080334b07f8feaf331f8cb2cdfd3193437 +size 32917 diff --git a/detail_png/Shaft_04874_length.png b/detail_png/Shaft_04874_length.png new file mode 100644 index 0000000000000000000000000000000000000000..dab42f96c81cc60d6f32ed18add3ec9b04c70e41 --- /dev/null +++ b/detail_png/Shaft_04874_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26c433d309eccca4be4d55d4157bbd5532471bf31882c4287d2c1c52f6a31447 +size 30673 diff --git a/detail_png/Shaft_04874_title.png b/detail_png/Shaft_04874_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c0bbb26204115b45e132bbdd74493620b2d09b61 --- /dev/null +++ b/detail_png/Shaft_04874_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04667ecdf7ef6ced501fd5ca2b8c6f9e42d1cb56b5b115a6e60869a220e0fdd8 +size 27779 diff --git a/detail_png/Shaft_04875_diam.png b/detail_png/Shaft_04875_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a445a3b942fef19c726ee675bc548eb17f59ed4b --- /dev/null +++ b/detail_png/Shaft_04875_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8daebc497446a3ee3875b4c8f3dbe333ddd81ce046418e60e89ffdfea5716e7a +size 20687 diff --git a/detail_png/Shaft_04875_length.png b/detail_png/Shaft_04875_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f191e9be26cca3a1d251225c0ca31ee69fe6bc49 --- /dev/null +++ b/detail_png/Shaft_04875_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ec5b4a010c88d33783e277c21f860cbf7bfbd5a6f6d0f5425add006300b5c42 +size 17556 diff --git a/detail_png/Shaft_04875_title.png b/detail_png/Shaft_04875_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dce22da40d3fdf6283c68461b5efcdea359cb4bd --- /dev/null +++ b/detail_png/Shaft_04875_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9bbb666655f26b092280b664f8e47f47a05422cd308da34b0e9428dbe79ddcf +size 16924 diff --git a/detail_png/Shaft_04882_diam.png b/detail_png/Shaft_04882_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..63963765d2ff7a9cbc0047d814aa179f321e0f2b --- /dev/null +++ b/detail_png/Shaft_04882_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e1df5fdb02face124f21d02fbd66368b34ef65e800410a01281f229fd995749 +size 24808 diff --git a/detail_png/Shaft_04882_length.png b/detail_png/Shaft_04882_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f045b42da73d58f9039451e5e3a593ab79564ca1 --- /dev/null +++ b/detail_png/Shaft_04882_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9684023a0a046c9f7cf7243f525bde1e51109600d08c8d62c5002770db2e672b +size 21415 diff --git a/detail_png/Shaft_04882_title.png b/detail_png/Shaft_04882_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c1aec95b857ef9e17e1d78088f9db7ad90b22fcc --- /dev/null +++ b/detail_png/Shaft_04882_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ff02dbadf3d35750aa51733729a6cad839fa018c8db79f17956d7e78590d70c +size 23488 diff --git a/detail_png/Shaft_04884_diam.png b/detail_png/Shaft_04884_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..fe5a1b3f5b1ae5a19125648dd2642936c69dd727 --- /dev/null +++ b/detail_png/Shaft_04884_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d98a5d158404f6e33ba9968249cf1370fe7d6a35b1503c14fd8aadf37f8f3742 +size 22949 diff --git a/detail_png/Shaft_04884_length.png b/detail_png/Shaft_04884_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f215e432016171a99ad0e3cc10f260ef1a6f06ce --- /dev/null +++ b/detail_png/Shaft_04884_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f4cdfd99c55be1a1a14183c3e0ce4ca12bc527f752be5caedace1980fe55384 +size 19002 diff --git a/detail_png/Shaft_04884_title.png b/detail_png/Shaft_04884_title.png new file mode 100644 index 0000000000000000000000000000000000000000..45c14d36e4cc3fce75ba575137c0b7a5b425f638 --- /dev/null +++ b/detail_png/Shaft_04884_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37742eedb5ede40ce0f338c1facab938a70f2d541941a7192168c44cf78fb5bd +size 18914 diff --git a/detail_png/Shaft_04888_diam.png b/detail_png/Shaft_04888_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8ce5d61f8674561acb1ee3cfbe691bbb77d4d772 --- /dev/null +++ b/detail_png/Shaft_04888_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4fe65250f993a352c59b334a15b315d09fe6a1b25eada0245edd2c19796459d1 +size 34086 diff --git a/detail_png/Shaft_04888_length.png b/detail_png/Shaft_04888_length.png new file mode 100644 index 0000000000000000000000000000000000000000..93b4fa418654a30f5e350c7ed51ee2279ccdcec7 --- /dev/null +++ b/detail_png/Shaft_04888_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59fe4cfb96e95b4f2cf8a69dde941dd818016d047dbbbdb7556cef11d6bd906e +size 38222 diff --git a/detail_png/Shaft_04888_title.png b/detail_png/Shaft_04888_title.png new file mode 100644 index 0000000000000000000000000000000000000000..05ac877b966eb2f879fce535a180cceeaef877dd --- /dev/null +++ b/detail_png/Shaft_04888_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98cd597bc176b2bcb9b8734829ac035f1edea1da85487386b84b919cf193395a +size 30988 diff --git a/detail_png/Shaft_04892_diam.png b/detail_png/Shaft_04892_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3b66f39baa53bc98a52455338bfd733c88505893 --- /dev/null +++ b/detail_png/Shaft_04892_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0a75027bc6b2f6d0085ed16a15c74bfbfebfd02d04d763ec7aba0222f853ed0 +size 27336 diff --git a/detail_png/Shaft_04892_length.png b/detail_png/Shaft_04892_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f193e734c7228eadcb9110472b22a0da4ccdc068 --- /dev/null +++ b/detail_png/Shaft_04892_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa7b0797aeeaf687c7684ca6fdb36450d16b07b5a53f9a2d0db4ca9aa826e2dd +size 33036 diff --git a/detail_png/Shaft_04892_title.png b/detail_png/Shaft_04892_title.png new file mode 100644 index 0000000000000000000000000000000000000000..610fafcfde7d6792c49a1154d9404a998ffeb837 --- /dev/null +++ b/detail_png/Shaft_04892_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d048632f5cf78fbf7ec3e7f94926db3a2f7b63faa1713e0c0147f5c804f1b7f +size 35966 diff --git a/detail_png/Shaft_04895_diam.png b/detail_png/Shaft_04895_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..ca68e8003c60736dff7e9cdd7c8df1c41b62ac1b --- /dev/null +++ b/detail_png/Shaft_04895_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc636fcb3a59643ad5f11ddcfb60f3df27fd6441e2b44e76eefa8f8336dae006 +size 25819 diff --git a/detail_png/Shaft_04895_length.png b/detail_png/Shaft_04895_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7e28926f4d971a5a0d9b285b9e9f692f0f9fa5f2 --- /dev/null +++ b/detail_png/Shaft_04895_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09890fff6ced7a5d365da46b71b53179202dc35804d25c3be76c2ff8c482dc4b +size 27355 diff --git a/detail_png/Shaft_04895_title.png b/detail_png/Shaft_04895_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e52e4942370fbfc38c6fcde7d760a585c43de22e --- /dev/null +++ b/detail_png/Shaft_04895_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0bf0c054a7b8fbb1bf1609eb5f690637580056f96cd560beb8e252f6849c7ce +size 36152 diff --git a/detail_png/Shaft_04898_diam.png b/detail_png/Shaft_04898_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..7e1acad2e117542f101c520e1183cf29bddeec87 --- /dev/null +++ b/detail_png/Shaft_04898_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d0b5da24bd8103c71381aa493ed8b9c334910f5f658a5fbb2c678b9642535c0 +size 19849 diff --git a/detail_png/Shaft_04898_length.png b/detail_png/Shaft_04898_length.png new file mode 100644 index 0000000000000000000000000000000000000000..91f9c423f14b33afe25224edfee28e92f01b4daa --- /dev/null +++ b/detail_png/Shaft_04898_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:130f40d0eb0143de4417538d16a6b1f04d27c6926c868c2cf531e287724417c2 +size 24016 diff --git a/detail_png/Shaft_04898_title.png b/detail_png/Shaft_04898_title.png new file mode 100644 index 0000000000000000000000000000000000000000..db90a8424e674783d9f93fea8adbd9f2220c35c6 --- /dev/null +++ b/detail_png/Shaft_04898_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ff408745d05dcc8507a73e6535dee6e1e1ec0e06e442bcb6f0520fb073968d1 +size 36676 diff --git a/detail_png/Shaft_04900_diam.png b/detail_png/Shaft_04900_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3aabc7a85d7bcfefc5a02d1c28f5149833022a8f --- /dev/null +++ b/detail_png/Shaft_04900_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1df154cf52c3dba0e8bbed7833512a9b0f7b68843dc7def15fc44d65e9a3e47a +size 41323 diff --git a/detail_png/Shaft_04900_length.png b/detail_png/Shaft_04900_length.png new file mode 100644 index 0000000000000000000000000000000000000000..379aa8edc471473d30d278c4b7779374a8e336d6 --- /dev/null +++ b/detail_png/Shaft_04900_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8743f1b4aabf53c0ffa266f33691c79db2569028dff1c05127ee1b207b2358b0 +size 46301 diff --git a/detail_png/Shaft_04900_title.png b/detail_png/Shaft_04900_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6696ab7ebbd88b73995e2bf28c1e74c8c2a95af4 --- /dev/null +++ b/detail_png/Shaft_04900_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea2d04fdb25abeb10b5a200a3407c3b6671f660a22a7b2c2cdef820b24630020 +size 29736 diff --git a/detail_png/Shaft_04905_diam.png b/detail_png/Shaft_04905_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6ac304525873fe88a2f6d7cc9b80efbfb394b229 --- /dev/null +++ b/detail_png/Shaft_04905_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ca8d30cb28b60d99c5bf9549adc9d4dabab73821236c39b839fbd814ec4a744 +size 41388 diff --git a/detail_png/Shaft_04905_length.png b/detail_png/Shaft_04905_length.png new file mode 100644 index 0000000000000000000000000000000000000000..63b1bd84048e56a571b215d4988e06d31d0d8d0c --- /dev/null +++ b/detail_png/Shaft_04905_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5607feb5410527eb2c6a15ab54175a221e49e653d988ad0955752ca5a7e330d +size 41245 diff --git a/detail_png/Shaft_04905_title.png b/detail_png/Shaft_04905_title.png new file mode 100644 index 0000000000000000000000000000000000000000..1dba916717a1da96b58d11545298d9601aeb16ea --- /dev/null +++ b/detail_png/Shaft_04905_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:879410fb2f3afd2a443d3bd64e5e99653028f25939d2bf58331a2c53f3b063e9 +size 32172 diff --git a/detail_png/Shaft_04906_diam.png b/detail_png/Shaft_04906_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..dee2492f5b14822285db78096e7a9557417dbb4c --- /dev/null +++ b/detail_png/Shaft_04906_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1abe777309b10beab243e2fa7ed1f61845069017ddc80d6bb4ee4d323b33755a +size 19871 diff --git a/detail_png/Shaft_04906_length.png b/detail_png/Shaft_04906_length.png new file mode 100644 index 0000000000000000000000000000000000000000..d5efa081e107aa835141ab29666179e67568f453 --- /dev/null +++ b/detail_png/Shaft_04906_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a44cb780d60e6f18ee0bca0f9620ec55dc7878b4b6017f6cefe4f9b239f7b940 +size 17850 diff --git a/detail_png/Shaft_04906_title.png b/detail_png/Shaft_04906_title.png new file mode 100644 index 0000000000000000000000000000000000000000..2b0bcad95fc7301048c8cb77c51c943ac0b66d16 --- /dev/null +++ b/detail_png/Shaft_04906_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e6b7150f7d8c4fb985ca11e42a929a7002a579ee8bcf79e456a439905d9fcc1 +size 15846 diff --git a/detail_png/Shaft_04920_diam.png b/detail_png/Shaft_04920_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..338fba2a9b2f3643cac4d9447a90a85739c62336 --- /dev/null +++ b/detail_png/Shaft_04920_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0eb72591d5b8f89aa1ebcf171f59845984a90ea1131aa50e02d5f69307ad031b +size 22602 diff --git a/detail_png/Shaft_04920_length.png b/detail_png/Shaft_04920_length.png new file mode 100644 index 0000000000000000000000000000000000000000..8b8a089eef9502085b55761784e319fa2db925a8 --- /dev/null +++ b/detail_png/Shaft_04920_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:daeafbcdcdb1e2c973591a2274dfc135d815ffecd691e86c5ed5d043eb1e3251 +size 19059 diff --git a/detail_png/Shaft_04920_title.png b/detail_png/Shaft_04920_title.png new file mode 100644 index 0000000000000000000000000000000000000000..c60a0c397e9e8ec0cab0def69570f216bc115d9e --- /dev/null +++ b/detail_png/Shaft_04920_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d828b9ecd89a8ab918146d576bcebb21dfb9b03041e2b781b72a31b142d016fb +size 22950 diff --git a/detail_png/Shaft_04922_diam.png b/detail_png/Shaft_04922_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e09b1d787e758128291f0679f9c9a8c77c06ca80 --- /dev/null +++ b/detail_png/Shaft_04922_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d77a7d7c64fbbf03860505e345d585fb6cf50c2c09928a75c4e76c73c6626dfd +size 24537 diff --git a/detail_png/Shaft_04922_length.png b/detail_png/Shaft_04922_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6d68ee6e59731a9673efe7b8d1e9d41b14d5f0fe --- /dev/null +++ b/detail_png/Shaft_04922_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2494ff8a40b56f3b0d38cee48b47ece0379616177bc4ff011352f9cbd9545e29 +size 21497 diff --git a/detail_png/Shaft_04922_title.png b/detail_png/Shaft_04922_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ab3c9d6a34fc313944847e02a3282772b11f1cb3 --- /dev/null +++ b/detail_png/Shaft_04922_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8e9a67db7ea984f6aa7606080de509ffd020140f47711f275cfddec21a74868 +size 24076 diff --git a/detail_png/Shaft_04929_diam.png b/detail_png/Shaft_04929_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4b8653b7894046de6cccbdf07aa3312f4144ecba --- /dev/null +++ b/detail_png/Shaft_04929_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c381fe2638bd0a83716d9f0520b102b6992e69466e9f22fcec1db4dd607c44ad +size 19946 diff --git a/detail_png/Shaft_04929_length.png b/detail_png/Shaft_04929_length.png new file mode 100644 index 0000000000000000000000000000000000000000..2fa7998ce4cdefcb9fa74e23c62ff37c331cd47c --- /dev/null +++ b/detail_png/Shaft_04929_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89c8f9d181b2ecad0be3eb85e5f199316583806b333c97965df5dbd45599e5c9 +size 17705 diff --git a/detail_png/Shaft_04929_title.png b/detail_png/Shaft_04929_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ec41172abfd4c111e64b0333b97fb6f5bd2c8d82 --- /dev/null +++ b/detail_png/Shaft_04929_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6dfe5c11cb4beb0580f4c406a79880efd688766747587dd9876834335c29419 +size 25988 diff --git a/detail_png/Shaft_04930_diam.png b/detail_png/Shaft_04930_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3ad0e3cabfca5d0a71e126cd5b3687a6c6e30ad0 --- /dev/null +++ b/detail_png/Shaft_04930_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2e8b7819d00796db983495d1f918edf1d78f6f0a0d48006dcac1954af36eeb0 +size 31466 diff --git a/detail_png/Shaft_04930_length.png b/detail_png/Shaft_04930_length.png new file mode 100644 index 0000000000000000000000000000000000000000..6816b0f23d43df6595d43468e407c82cc995c4d8 --- /dev/null +++ b/detail_png/Shaft_04930_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbce45fc7145e35da17e5bdd721f65bd01e8b995c08ada8a56933d3353c7e5c3 +size 45760 diff --git a/detail_png/Shaft_04930_title.png b/detail_png/Shaft_04930_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f46631989ff6bc4a72ca0a75e48da503b516414b --- /dev/null +++ b/detail_png/Shaft_04930_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:826eb1a2fa269cfb8f93c4eef22f908e49953843e76a27bb4a112ba00aa8e628 +size 30292 diff --git a/detail_png/Shaft_04931_diam.png b/detail_png/Shaft_04931_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..3356713ba1577d7a5bfd24ed74d3f4e967a84dec --- /dev/null +++ b/detail_png/Shaft_04931_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a46682df3a04fb12bcd87ec0f4be17ef1d49e136897e750cd79bb551ac8b62e +size 20663 diff --git a/detail_png/Shaft_04931_length.png b/detail_png/Shaft_04931_length.png new file mode 100644 index 0000000000000000000000000000000000000000..735637126872ac7964dd1667b89913ab699493b3 --- /dev/null +++ b/detail_png/Shaft_04931_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4ad55ef6a791bea0219e9a52e0b1ec2e6f9ade6f4437cdd1f69acf6116ae7c3 +size 16513 diff --git a/detail_png/Shaft_04931_title.png b/detail_png/Shaft_04931_title.png new file mode 100644 index 0000000000000000000000000000000000000000..cf7de4e2f027573f23a8911f0f2dc44307c64769 --- /dev/null +++ b/detail_png/Shaft_04931_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3da96852419e2012cf35e46a3954c26386713f8aed0852f478ab3a147ed2bb47 +size 16617 diff --git a/detail_png/Shaft_04933_diam.png b/detail_png/Shaft_04933_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..c2873a495b65fff05b80802f7311f33900344661 --- /dev/null +++ b/detail_png/Shaft_04933_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef0cea86c0c1d3c7f942cd17c086f2dc05faebf8c8ef8d1bee4fe8a42f7060bf +size 17808 diff --git a/detail_png/Shaft_04933_length.png b/detail_png/Shaft_04933_length.png new file mode 100644 index 0000000000000000000000000000000000000000..db3ed459fdb33c18b42dd64566c66eb0fa6216a1 --- /dev/null +++ b/detail_png/Shaft_04933_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c5be165da194dd432736cd3f1a8b1e16999010966ed852d90693c571b1bd112 +size 18311 diff --git a/detail_png/Shaft_04933_title.png b/detail_png/Shaft_04933_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a9085b45ad3c1d3b4f21e7d197abbf99c1b64ec4 --- /dev/null +++ b/detail_png/Shaft_04933_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a09b88a0ba1aa988dba57d617d3ce0c2f86c95d3d47cb3e8b6ea7d9135cfc83 +size 30291 diff --git a/detail_png/Shaft_04937_diam.png b/detail_png/Shaft_04937_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8b360676d9b7e3b4a37f9600557755a010f5a207 --- /dev/null +++ b/detail_png/Shaft_04937_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fe65169ef0bceb6205e8a6c92716516e7824864324ce2c50c78c62a53a3c0f9 +size 20514 diff --git a/detail_png/Shaft_04937_length.png b/detail_png/Shaft_04937_length.png new file mode 100644 index 0000000000000000000000000000000000000000..041b9d2f10fcf2171d1d79ff8653f35a6d69e78d --- /dev/null +++ b/detail_png/Shaft_04937_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c0d12181bc39b508d0e093066277e9d72cd3e0009358967209aa5584d83cbaa +size 23854 diff --git a/detail_png/Shaft_04937_title.png b/detail_png/Shaft_04937_title.png new file mode 100644 index 0000000000000000000000000000000000000000..edd82fe973f5bbb431715799f5ed1be7581b9a5e --- /dev/null +++ b/detail_png/Shaft_04937_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4209842d2035b406cea92931608dd83c4a0318109e73335be2b904fb04ced6ea +size 28902 diff --git a/detail_png/Shaft_04939_diam.png b/detail_png/Shaft_04939_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..8819e7a6377bf7f96b3d3db3b6824f20dbba5bad --- /dev/null +++ b/detail_png/Shaft_04939_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:328261b44c4c11d356d6a68be70a9822920a1709428edb43b1b6cdfe64cf2807 +size 24893 diff --git a/detail_png/Shaft_04939_length.png b/detail_png/Shaft_04939_length.png new file mode 100644 index 0000000000000000000000000000000000000000..a34eddda7d315e39ba10a0322805d210d760d16a --- /dev/null +++ b/detail_png/Shaft_04939_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0482360f4dea689465fd613542fe202c6ca0ebf2adce049de323e2ed15890879 +size 23664 diff --git a/detail_png/Shaft_04939_title.png b/detail_png/Shaft_04939_title.png new file mode 100644 index 0000000000000000000000000000000000000000..91eea9b160bc4c884e78fd4273e5c6e4b368099d --- /dev/null +++ b/detail_png/Shaft_04939_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:465fd31b77706d52683c4a2b01bcdb31cd08e2329e4b4a4a207fd119f0b0accd +size 29437 diff --git a/detail_png/Shaft_04943_diam.png b/detail_png/Shaft_04943_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..52f216861a9ffa43813247fe8e71e3c50c4e0f47 --- /dev/null +++ b/detail_png/Shaft_04943_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a518be04f49ab16c32de56fbc7b9a649a5a04c5d8cfdcf1683a967b726eedd5 +size 35113 diff --git a/detail_png/Shaft_04943_length.png b/detail_png/Shaft_04943_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f8d5cd3db6aaf0efb8a269bd3941b85c4407bc6c --- /dev/null +++ b/detail_png/Shaft_04943_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8891cc763991dfef2af40bac678443404ef7c95d96fb0ce7ca562578b0560784 +size 38363 diff --git a/detail_png/Shaft_04943_title.png b/detail_png/Shaft_04943_title.png new file mode 100644 index 0000000000000000000000000000000000000000..dc2a2c7e8d273f22aab3394a51998267728866eb --- /dev/null +++ b/detail_png/Shaft_04943_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce91671f244d2b241b07a837c9e54891bbf2ced1e5d88b6e3a6e176420a384a9 +size 28998 diff --git a/detail_png/Shaft_04945_diam.png b/detail_png/Shaft_04945_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..05e49acddbeab105cf8cee9790f0eac2742e9106 --- /dev/null +++ b/detail_png/Shaft_04945_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e58f72f7fc92fed342bd67af6015fe8accb70493f42ce00a438acf25392ddf08 +size 26493 diff --git a/detail_png/Shaft_04945_length.png b/detail_png/Shaft_04945_length.png new file mode 100644 index 0000000000000000000000000000000000000000..9d5ad1f5b67d993198c0c9a1ae707e1608631034 --- /dev/null +++ b/detail_png/Shaft_04945_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8547b0ac2667e9861b25742fb56893107de1d40a789df833564c02fd47e6b088 +size 37452 diff --git a/detail_png/Shaft_04945_title.png b/detail_png/Shaft_04945_title.png new file mode 100644 index 0000000000000000000000000000000000000000..72ed929f1de57ee3beecff11c3f16076a39c30a8 --- /dev/null +++ b/detail_png/Shaft_04945_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d069aa5944a965ae2ac1e25656e4ae463312a3647856c8dbe87ed80f193c3fbd +size 32118 diff --git a/detail_png/Shaft_04950_diam.png b/detail_png/Shaft_04950_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..b60c0b1da4d1b88b421c7c5f7af49a4a82a51dd3 --- /dev/null +++ b/detail_png/Shaft_04950_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0874b51b74f43cf8a9c34871b84455a9df54052d4d50dac204c461a518172663 +size 25584 diff --git a/detail_png/Shaft_04950_length.png b/detail_png/Shaft_04950_length.png new file mode 100644 index 0000000000000000000000000000000000000000..3f1693176b0d40122eb20c8ec97524c32f20220e --- /dev/null +++ b/detail_png/Shaft_04950_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baa72da91feca8fd07fe4ac3fb40a4e2c71deee26bebaba58a52142ae9c622db +size 22060 diff --git a/detail_png/Shaft_04950_title.png b/detail_png/Shaft_04950_title.png new file mode 100644 index 0000000000000000000000000000000000000000..74f4b5d0e7e1396feafa46fe8c8d461ff166ec4a --- /dev/null +++ b/detail_png/Shaft_04950_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00d141d0560cdff087a9460bdb3131bc6da52400395c28431b319d792276da66 +size 22712 diff --git a/detail_png/Shaft_04951_diam.png b/detail_png/Shaft_04951_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e5277d1cb502dcc03d9810ddf4bed8d183076114 --- /dev/null +++ b/detail_png/Shaft_04951_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dec8dd26f2e62c2326af990b9515f58636c9c4120c283604ce22c902bb24dbc2 +size 26229 diff --git a/detail_png/Shaft_04951_length.png b/detail_png/Shaft_04951_length.png new file mode 100644 index 0000000000000000000000000000000000000000..f6eecfc1c60146ccfcc85aa4d3876ee68c6d028e --- /dev/null +++ b/detail_png/Shaft_04951_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:428bd4ceaa782b172d243ef3cf68342d308d18bad5f2202e98cf76dad232886c +size 25682 diff --git a/detail_png/Shaft_04951_title.png b/detail_png/Shaft_04951_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f2ce7e32bd668c640c1f08b73bbeb454dbed4ad2 --- /dev/null +++ b/detail_png/Shaft_04951_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3532978e11a8500272078650ad4b856593b31881751aef0354e787fa9fca99cc +size 31236 diff --git a/detail_png/Shaft_04953_diam.png b/detail_png/Shaft_04953_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..71a8a8402904cf26e8600ce2ebcc0abc0e1187c8 --- /dev/null +++ b/detail_png/Shaft_04953_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6db6012c1a7072b1c98908ef1b2ae07109a08de4def44e1d14630f9177a46190 +size 26765 diff --git a/detail_png/Shaft_04953_length.png b/detail_png/Shaft_04953_length.png new file mode 100644 index 0000000000000000000000000000000000000000..80fe23ff3bd81b2188ab2fc536dc235f0c4416d6 --- /dev/null +++ b/detail_png/Shaft_04953_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d945e6fc79dfa6d3b4cb642ef475d858b8e566a4f4f5c26c2110139e3ca2243 +size 37063 diff --git a/detail_png/Shaft_04953_title.png b/detail_png/Shaft_04953_title.png new file mode 100644 index 0000000000000000000000000000000000000000..8ee69f212973051ffa77d12e673580b5baf749d4 --- /dev/null +++ b/detail_png/Shaft_04953_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d654c1c64f20b194008d2f6101b89633d1154d5561b572d3a575abd2a25f4a86 +size 29897 diff --git a/detail_png/Shaft_04957_diam.png b/detail_png/Shaft_04957_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..4d32a7f3deb492f3c3daed70691079ba2cfc3cdb --- /dev/null +++ b/detail_png/Shaft_04957_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7882f75940ab3e0d6a17efa5768ab24fe7ad7f598efa189f5066f54d196b4330 +size 26423 diff --git a/detail_png/Shaft_04957_length.png b/detail_png/Shaft_04957_length.png new file mode 100644 index 0000000000000000000000000000000000000000..508bfe6f6a4e093cc277ede4d6c06556dcc4175e --- /dev/null +++ b/detail_png/Shaft_04957_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ee1bd2d508979f6c0de405e298cecdfdbd2c46f2779f118a076f1feffa7cfe5 +size 35887 diff --git a/detail_png/Shaft_04957_title.png b/detail_png/Shaft_04957_title.png new file mode 100644 index 0000000000000000000000000000000000000000..ff761d52a3f39b9ca19190cd9af7aad18e922d5f --- /dev/null +++ b/detail_png/Shaft_04957_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3a5a87c7916a557d663ed49c9775b81fd77321b35c7e31eb98c55f13548bd93 +size 35629 diff --git a/detail_png/Shaft_04959_diam.png b/detail_png/Shaft_04959_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..a6d6cfecc20272fbbdeb5ddbcad61881f738ec72 --- /dev/null +++ b/detail_png/Shaft_04959_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6f332a960a861c443f4f562479eafc5b31d024a4ebe1a047ee8a5d721ea3977 +size 25974 diff --git a/detail_png/Shaft_04959_length.png b/detail_png/Shaft_04959_length.png new file mode 100644 index 0000000000000000000000000000000000000000..55a5695e021f74020a55d1d14ee6c11164dd27ed --- /dev/null +++ b/detail_png/Shaft_04959_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9eb6c13ef84ea78f1e6f10da17cd54a277326d04b0829822f8863ae9bfb6d9d9 +size 22346 diff --git a/detail_png/Shaft_04959_title.png b/detail_png/Shaft_04959_title.png new file mode 100644 index 0000000000000000000000000000000000000000..3c9bab83fce1a91977b96beef5faa3f36c8a2742 --- /dev/null +++ b/detail_png/Shaft_04959_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8bd7157d51c170cf759e6fe76642c8e7220ea535674a7c9c8664d89ff19655d +size 34781 diff --git a/detail_png/Shaft_04961_diam.png b/detail_png/Shaft_04961_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..81ea987e25892973fb8ef8e34bc4a308f89f790b --- /dev/null +++ b/detail_png/Shaft_04961_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3310c5c61a5b0aa56adc59958f1c6593a71b953bb2bbf73aa03db82e1991f3dd +size 23586 diff --git a/detail_png/Shaft_04961_length.png b/detail_png/Shaft_04961_length.png new file mode 100644 index 0000000000000000000000000000000000000000..1cec20fa30080447aa665b1a3e1ddfae4f9b0d71 --- /dev/null +++ b/detail_png/Shaft_04961_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cd103434757028d3228fe3a69a4a6c98f91832d08964e2f226dab803b04bd90 +size 23133 diff --git a/detail_png/Shaft_04961_title.png b/detail_png/Shaft_04961_title.png new file mode 100644 index 0000000000000000000000000000000000000000..a183e67777ebdf54d869f71a0e1fb1d82649e78c --- /dev/null +++ b/detail_png/Shaft_04961_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85b32c9780ea5ae4072a27b409715ca82497c5db5193fbbe686a1e233a4043d6 +size 31662 diff --git a/detail_png/Shaft_04967_diam.png b/detail_png/Shaft_04967_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..30cd8103800ca819cbff11e439cf5663046737ff --- /dev/null +++ b/detail_png/Shaft_04967_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3154eb092bc8388589816b7055eb25740f97b89777ca95b79107ab0b36ec9691 +size 40197 diff --git a/detail_png/Shaft_04967_length.png b/detail_png/Shaft_04967_length.png new file mode 100644 index 0000000000000000000000000000000000000000..fdf7f28fde5c9d50e0d690a3ee718fadac111900 --- /dev/null +++ b/detail_png/Shaft_04967_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba57e38061154f35b477de9485eb1608964a2804e9c2c2386bd6b5bc9aaf1f35 +size 58465 diff --git a/detail_png/Shaft_04967_title.png b/detail_png/Shaft_04967_title.png new file mode 100644 index 0000000000000000000000000000000000000000..0270403bcf82d36c79b658000ab12f649842ab70 --- /dev/null +++ b/detail_png/Shaft_04967_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3720273111d4f1992ed9ed6d39bb4bd8f4842ea34706f30ab63b3bb3bae2efa7 +size 30714 diff --git a/detail_png/Shaft_04971_diam.png b/detail_png/Shaft_04971_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..48bc6b54ed7ed4d96ca150f6cc981b54ef716232 --- /dev/null +++ b/detail_png/Shaft_04971_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48d6145ebffb0f13ec9b4e2fd37ce9674d10e8bc35a571cb71e3c69e1cf5f3d4 +size 20245 diff --git a/detail_png/Shaft_04971_length.png b/detail_png/Shaft_04971_length.png new file mode 100644 index 0000000000000000000000000000000000000000..0559b73a54487a2a52c8512634e463ea7865bdfd --- /dev/null +++ b/detail_png/Shaft_04971_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:946975475b05f6d400071e76d2218dd302cecfb0c2319a7fabb8ef3a1101dd77 +size 15846 diff --git a/detail_png/Shaft_04971_title.png b/detail_png/Shaft_04971_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e230a654c8a2f1a0e65dfee97a923a4f02542ecb --- /dev/null +++ b/detail_png/Shaft_04971_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f1176d89ae8815f500e51a56afc1addc561b99faeb6523877ec483a8cbdf6df +size 15252 diff --git a/detail_png/Shaft_04972_diam.png b/detail_png/Shaft_04972_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6b93bfb3d9f257070c0cc52468fb4ffc9d88679a --- /dev/null +++ b/detail_png/Shaft_04972_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36381b108ec14bc29dea501aa623e0ae040d34f496880cafc7fbcbeac5b344ec +size 22891 diff --git a/detail_png/Shaft_04972_length.png b/detail_png/Shaft_04972_length.png new file mode 100644 index 0000000000000000000000000000000000000000..567241d36a35a3819de9b359ff89514520480d3d --- /dev/null +++ b/detail_png/Shaft_04972_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04723bb6d1ee59ef0085ed1dd63877ed785b0deba85281ce609e05e52448dd27 +size 21108 diff --git a/detail_png/Shaft_04972_title.png b/detail_png/Shaft_04972_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9701f75e92bf7b0c49479c126927d66ff2d26534 --- /dev/null +++ b/detail_png/Shaft_04972_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d29ca6b39a4d1be99a8691468f76e6ce32e2683e3270c975a6a5e477afa9254 +size 20329 diff --git a/detail_png/Shaft_04975_diam.png b/detail_png/Shaft_04975_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..686dde88dcbab7cb2c4dfa2f7e84e45a2cbf4198 --- /dev/null +++ b/detail_png/Shaft_04975_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51ff13b23525175644a50e2368b7e0a9b97d56273de20f5695ccb3df722db1e0 +size 40224 diff --git a/detail_png/Shaft_04975_length.png b/detail_png/Shaft_04975_length.png new file mode 100644 index 0000000000000000000000000000000000000000..efbe7d29f607d1c0846d68a6a5da3a5de5767339 --- /dev/null +++ b/detail_png/Shaft_04975_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bc384d993138554aa05e0efb7b52e4103dfe43740d6977c020c866ab0179eac +size 42390 diff --git a/detail_png/Shaft_04975_title.png b/detail_png/Shaft_04975_title.png new file mode 100644 index 0000000000000000000000000000000000000000..9cf3170debc48f8d0cf9a8bee5a4edb61889f1ef --- /dev/null +++ b/detail_png/Shaft_04975_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40209f206f86ad2bc5ff69dcaff413218195745c577cdd8dbd53b0977160f37d +size 35386 diff --git a/detail_png/Shaft_04978_diam.png b/detail_png/Shaft_04978_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e5d2c085728abc9a79ebf3567ca85a3b83a693e0 --- /dev/null +++ b/detail_png/Shaft_04978_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4836bc1e0a635977e08b54db0d48a3c0faadb7ddf3e8ae48465a89b4e1a5de4b +size 19452 diff --git a/detail_png/Shaft_04978_length.png b/detail_png/Shaft_04978_length.png new file mode 100644 index 0000000000000000000000000000000000000000..38fa4269d393fc7b94519a62adf4b872c7605a9a --- /dev/null +++ b/detail_png/Shaft_04978_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fe7d5cffdfb0d19088f8045ac4b17dff33926d759b56b21d9ba10cc66fbe19e +size 14517 diff --git a/detail_png/Shaft_04978_title.png b/detail_png/Shaft_04978_title.png new file mode 100644 index 0000000000000000000000000000000000000000..6a787812eecd0b3c40c27c97175ec1a683153500 --- /dev/null +++ b/detail_png/Shaft_04978_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5db51a59ba8343bdeb08df73f0d76624e024f2b4a52a54d1616e4b84d82c1909 +size 17531 diff --git a/detail_png/Shaft_04979_diam.png b/detail_png/Shaft_04979_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..e5e17c0314c62e1644484541703105b681d6b970 --- /dev/null +++ b/detail_png/Shaft_04979_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c53b08e45e1bd5767e7c82eef8b2d6daae8fddaa0e3f6cbcc9980db6dc2c13c +size 29066 diff --git a/detail_png/Shaft_04979_length.png b/detail_png/Shaft_04979_length.png new file mode 100644 index 0000000000000000000000000000000000000000..7ee60e6f165d3ae4f11a1555d6585ee9f16446d7 --- /dev/null +++ b/detail_png/Shaft_04979_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e136d0c10107904446c3f1cc879bbf313f7bc89d9f700ecf78f07385e0a70a9 +size 24708 diff --git a/detail_png/Shaft_04979_title.png b/detail_png/Shaft_04979_title.png new file mode 100644 index 0000000000000000000000000000000000000000..f8f76c10d16c8989448f02dea807ac063d7a2cbe --- /dev/null +++ b/detail_png/Shaft_04979_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c59af7a48e661dcd475561d511b3e32116707d9b034f397754390593c636330 +size 23577 diff --git a/detail_png/Shaft_04981_diam.png b/detail_png/Shaft_04981_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..6362340f8888c1561edd1726fc370bdff28a2a65 --- /dev/null +++ b/detail_png/Shaft_04981_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5006731d92373795edf2d26f691652fc4574b841498998221ef6a55d1c0586d0 +size 19132 diff --git a/detail_png/Shaft_04981_length.png b/detail_png/Shaft_04981_length.png new file mode 100644 index 0000000000000000000000000000000000000000..cb9aee82ae85fbb7262bf08a8da83c4a9652f918 --- /dev/null +++ b/detail_png/Shaft_04981_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2302bd264446c67c83e395e0e8a9a3d78b61bd1729eb4eb3999faca89fb0990 +size 16228 diff --git a/detail_png/Shaft_04981_title.png b/detail_png/Shaft_04981_title.png new file mode 100644 index 0000000000000000000000000000000000000000..e0a65cc8977918d492084c035dc29285560d5176 --- /dev/null +++ b/detail_png/Shaft_04981_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4aec0bec48109f91f82bf55568f39503359851280b77466afcee9a70862d119d +size 21872 diff --git a/detail_png/Shaft_04986_diam.png b/detail_png/Shaft_04986_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..1abf526337c83dd3ee3b07617f8949960f584198 --- /dev/null +++ b/detail_png/Shaft_04986_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6456a41175be0fa43c279ec4eef2acb4de68742c3ed13dde8b1e3056ddb75dff +size 20552 diff --git a/detail_png/Shaft_04986_length.png b/detail_png/Shaft_04986_length.png new file mode 100644 index 0000000000000000000000000000000000000000..881c22d631899c9030f4af2079e2f358125a3da1 --- /dev/null +++ b/detail_png/Shaft_04986_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a724c7a0a0fcacfaef698b87102db1102db844cbfca54791aa0a0743fe7d625 +size 16099 diff --git a/detail_png/Shaft_04986_title.png b/detail_png/Shaft_04986_title.png new file mode 100644 index 0000000000000000000000000000000000000000..12d502b6b2cffc8a8b6d430cdb7adf164e6933c6 --- /dev/null +++ b/detail_png/Shaft_04986_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f76ffb078d10e44b64fce38e5581d37a5c07821627f96845e70f971723b45ab3 +size 16427 diff --git a/detail_png/Shaft_04994_diam.png b/detail_png/Shaft_04994_diam.png new file mode 100644 index 0000000000000000000000000000000000000000..0cefc8751e69f231642ee64997ab98d69dd845a5 --- /dev/null +++ b/detail_png/Shaft_04994_diam.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e11e39c0a504e58fb6b94c7988c9aa802ab6d87a633cea7235bdc972736fb2a +size 29182 diff --git a/detail_png/Shaft_04994_length.png b/detail_png/Shaft_04994_length.png new file mode 100644 index 0000000000000000000000000000000000000000..061efdb575e5e6b9100ccebdcaaaa286af15079f --- /dev/null +++ b/detail_png/Shaft_04994_length.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91f27fc87921a389b2f518244e95e3e2ca1c2b608610001c82bb55fa3168633d +size 29834 diff --git a/detail_png/Shaft_04994_title.png b/detail_png/Shaft_04994_title.png new file mode 100644 index 0000000000000000000000000000000000000000..bc1247e672438f529912a7c5895f349f81321bd0 --- /dev/null +++ b/detail_png/Shaft_04994_title.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71a1ac504b7d22286de6c1fcda38ab38ea065bb9da9eda46f35ba04cfea419d7 +size 31851 diff --git a/images/Shaft_00000.png b/images/Shaft_00000.png new file mode 100644 index 0000000000000000000000000000000000000000..fbf9e1b455b106a7b3bd7e25d98cebc40bd2e372 --- /dev/null +++ b/images/Shaft_00000.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bea60ca33e5d9380e8ab6d52ce74a94e5620bf2617108157a4c625aa5696bf70 +size 99119 diff --git a/images/Shaft_00001.png b/images/Shaft_00001.png new file mode 100644 index 0000000000000000000000000000000000000000..0a58dd755dff763639c6a469099de840b9b27edf --- /dev/null +++ b/images/Shaft_00001.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1f51a2202b675d860b6f2646d14871cc01538fc24bbf93708f986954e8d22b9 +size 81922 diff --git a/images/Shaft_00002.png b/images/Shaft_00002.png new file mode 100644 index 0000000000000000000000000000000000000000..950f97abfdb0c2d2986f7b914a0cbf6de9a7dd25 --- /dev/null +++ b/images/Shaft_00002.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2887c6a67262a2389f3eb1359e378e5a204cd49e862674fbf034159d8b7eebc6 +size 93923 diff --git a/images/Shaft_00003.png b/images/Shaft_00003.png new file mode 100644 index 0000000000000000000000000000000000000000..d95d772c885c18be3c4958a88c182dd7bcb096f3 --- /dev/null +++ b/images/Shaft_00003.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b00e1267b14110396edb461852c6c506e14e8f3ee2e79c729456a5832bac3352 +size 80424 diff --git a/images/Shaft_00004.png b/images/Shaft_00004.png new file mode 100644 index 0000000000000000000000000000000000000000..136e180f03af91bdc043f73fd8f91e07ea463cb7 --- /dev/null +++ b/images/Shaft_00004.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3751aeb265821c79f960a83a5c3b2797be17b3a1b451cd4834058b897a561fe8 +size 70307 diff --git a/images/Shaft_00005.png b/images/Shaft_00005.png new file mode 100644 index 0000000000000000000000000000000000000000..f9cc986db5146b9c9d7fb2b1dc0fa31b73b72d6b --- /dev/null +++ b/images/Shaft_00005.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98d023443d008a6ed2d9d6785351ee10dc10c5b633849a25839ea5f70bbd9aab +size 71580 diff --git a/images/Shaft_00006.png b/images/Shaft_00006.png new file mode 100644 index 0000000000000000000000000000000000000000..25c647e362b695412a45ad8c7384c7485bdd4efb --- /dev/null +++ b/images/Shaft_00006.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9df482ad004115a9f4749171351cf2d925b0936c60083d0857bcdfb913a9ccf +size 85812 diff --git a/images/Shaft_00007.png b/images/Shaft_00007.png new file mode 100644 index 0000000000000000000000000000000000000000..870f0091d3b281141b4eebc0b8a33c127a15a4f8 --- /dev/null +++ b/images/Shaft_00007.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f81a38d394db1be430c69b3afd9232258e72e413762c6a74e452b7a35c718d0 +size 71450 diff --git a/images/Shaft_00008.png b/images/Shaft_00008.png new file mode 100644 index 0000000000000000000000000000000000000000..cc1896040956bc0454b21d68ed4b2ff9439f68e5 --- /dev/null +++ b/images/Shaft_00008.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:323279be7cc89b810b389331e180f954c0e0be7e7c8be37549279a4aab475a97 +size 82320 diff --git a/images/Shaft_00009.png b/images/Shaft_00009.png new file mode 100644 index 0000000000000000000000000000000000000000..b58475c11a97aaeb580948181009ce39828e7516 --- /dev/null +++ b/images/Shaft_00009.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3ab6a415f01f26097d315a63c9cf2d06b5327d4b6e04ebf3b50de934212d421 +size 145411 diff --git a/images/Shaft_00010.png b/images/Shaft_00010.png new file mode 100644 index 0000000000000000000000000000000000000000..ca34e6a3e71577c64b1d6b4c5e50d07ab49a9119 --- /dev/null +++ b/images/Shaft_00010.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e29b671615398ba172c2065081ccbd616416047036d1653bf2f1218e24439bd +size 112286 diff --git a/images/Shaft_00011.png b/images/Shaft_00011.png new file mode 100644 index 0000000000000000000000000000000000000000..26f66e81b1fa2991eb473163f520a8987d5c3ee5 --- /dev/null +++ b/images/Shaft_00011.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91f4ff779b995a571d211f622a66b3855dc91c72bb76e81471e785f7ae1c23c5 +size 112114 diff --git a/images/Shaft_00012.png b/images/Shaft_00012.png new file mode 100644 index 0000000000000000000000000000000000000000..f4351c7c0c2695130b1df30836c47f6e91e9fb3c --- /dev/null +++ b/images/Shaft_00012.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aed8ffae1512f5793ca30a9c2f5dc33b486cab2431b4593da6aa5323d3fefa72 +size 142686 diff --git a/images/Shaft_00013.png b/images/Shaft_00013.png new file mode 100644 index 0000000000000000000000000000000000000000..b3496a0a8ccacf367efe4b74516e01b416dd2634 --- /dev/null +++ b/images/Shaft_00013.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bccf7ae8040f279ec01d954642655479cc53a156caee33f91cd2d692253d31c0 +size 142830 diff --git a/images/Shaft_00014.png b/images/Shaft_00014.png new file mode 100644 index 0000000000000000000000000000000000000000..8199c17d31552465c0b71f97a0600fd5dbb921df --- /dev/null +++ b/images/Shaft_00014.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1779435f64adc5d675f35f4f114b73180c8827475f640b934d92af8ffffc9288 +size 165564 diff --git a/images/Shaft_00015.png b/images/Shaft_00015.png new file mode 100644 index 0000000000000000000000000000000000000000..8ca5ff287dd1699c8ae7c93d010a766ab38ac189 --- /dev/null +++ b/images/Shaft_00015.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7a78b9cdd55acbfab06523f168ee4c0f2454a01b724c4a30a057c9fae0f6154 +size 133553 diff --git a/images/Shaft_00016.png b/images/Shaft_00016.png new file mode 100644 index 0000000000000000000000000000000000000000..a029acf8fa41d5414cb60defde35da956fdbb2be --- /dev/null +++ b/images/Shaft_00016.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:822a5b410c303c3bf7e72cfb67e02d190dca793c76406f23b2284e799c862e5e +size 113065 diff --git a/images/Shaft_00017.png b/images/Shaft_00017.png new file mode 100644 index 0000000000000000000000000000000000000000..67576f616b12759e90df5b8a160db0373ffd821d --- /dev/null +++ b/images/Shaft_00017.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a89c6a4db653940b3a2f031ef4534b3fc401ebadb8f97c0a1113cb91cb13b01e +size 112613 diff --git a/images/Shaft_00018.png b/images/Shaft_00018.png new file mode 100644 index 0000000000000000000000000000000000000000..8f047d01b2aab8362c236fa895de13984536b8b6 --- /dev/null +++ b/images/Shaft_00018.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3356b74ba1a32094be6042a74c93b417db1e9d135c2db9a759f04bb03c092bf0 +size 131746 diff --git a/images/Shaft_00019.png b/images/Shaft_00019.png new file mode 100644 index 0000000000000000000000000000000000000000..f6a9026e3faa3b080583bd00062fbdf21de8629c --- /dev/null +++ b/images/Shaft_00019.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:269042254ad9a4c1976e400dba4657191444682a8dbd3487c7513721a83310f6 +size 118447 diff --git a/images/Shaft_00020.png b/images/Shaft_00020.png new file mode 100644 index 0000000000000000000000000000000000000000..160ce3712b86b56c9f57d82edac8ea31653ce85f --- /dev/null +++ b/images/Shaft_00020.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:489b9c3e59bbb241449c06f92ad3ba3a0dc2034155247d60a2659680e9cbee23 +size 159399 diff --git a/images/Shaft_00021.png b/images/Shaft_00021.png new file mode 100644 index 0000000000000000000000000000000000000000..575b0db05c28c8587554025c3644d9abbb5827cb --- /dev/null +++ b/images/Shaft_00021.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e76eb262219128d69591ca378e11d981017eb3bb8f1c162722fde631e127c7f4 +size 125746 diff --git a/images/Shaft_00022.png b/images/Shaft_00022.png new file mode 100644 index 0000000000000000000000000000000000000000..97470a946fedf0798177b020a65126d781ed2132 --- /dev/null +++ b/images/Shaft_00022.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa2cf2772ebe0ab106e8c08d306bd38997a1552efe801437eaf9951f03e6c5d3 +size 170986 diff --git a/images/Shaft_00023.png b/images/Shaft_00023.png new file mode 100644 index 0000000000000000000000000000000000000000..e4ca49f39d5c0f71f4be38edced943f08581529e --- /dev/null +++ b/images/Shaft_00023.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07c5652c7ff965db7e6c4aee5cfa35be958ca45ebfe7e0ebfcd38c25f075a535 +size 126213 diff --git a/images/Shaft_00024.png b/images/Shaft_00024.png new file mode 100644 index 0000000000000000000000000000000000000000..da0c52a7e3551cffd592aff79bc8ad61847bbea8 --- /dev/null +++ b/images/Shaft_00024.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67cbda82375c0b68e706279414c62fc8d5512baffc630d9aad35771020ea6b5f +size 115780 diff --git a/images/Shaft_00025.png b/images/Shaft_00025.png new file mode 100644 index 0000000000000000000000000000000000000000..1bf37eb5393b4bddcb85de03624fea8fc62073d2 --- /dev/null +++ b/images/Shaft_00025.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f935ae7aa100141025a52c1c83547219a4f9efbd83b30dfbd3fa48373527c50a +size 126658 diff --git a/images/Shaft_00026.png b/images/Shaft_00026.png new file mode 100644 index 0000000000000000000000000000000000000000..7201289749fd6a45bc5af47518bcb7b85f8de343 --- /dev/null +++ b/images/Shaft_00026.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c1ea71719a56862f1185a548e8fb408338172d660b3cb5c2bd9d41831130182 +size 138762 diff --git a/images/Shaft_00027.png b/images/Shaft_00027.png new file mode 100644 index 0000000000000000000000000000000000000000..a48195f39da689cfa62b034d19ed0ec984eabfa0 --- /dev/null +++ b/images/Shaft_00027.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91a2aa83a085ec6f0ce42692b15835674936266240eb679f611fea482d9c3bbe +size 133174 diff --git a/images/Shaft_00028.png b/images/Shaft_00028.png new file mode 100644 index 0000000000000000000000000000000000000000..ab2bb3d0be7c116e2c8d25bfae6bbfd732dc41d9 --- /dev/null +++ b/images/Shaft_00028.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0f7a425a58bcc264513be6b6e0d5ed83f80fc281cf36a7d56aa23c86d078c9f +size 151150 diff --git a/images/Shaft_00029.png b/images/Shaft_00029.png new file mode 100644 index 0000000000000000000000000000000000000000..47a802342d94902080f12a1284d68ca5604f8286 --- /dev/null +++ b/images/Shaft_00029.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bef29253fab3ca1e18ccaf78ae22cc54fbef64f8799418bfb0d1c9e4e22ca858 +size 135397 diff --git a/images/Shaft_00030.png b/images/Shaft_00030.png new file mode 100644 index 0000000000000000000000000000000000000000..f2557d7d4a59121d90e70dfb0b2ac478e09f03b0 --- /dev/null +++ b/images/Shaft_00030.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7ef39269743071705d3f94975ddaf5ae8cfe011dcd07f23100e28e806d6b278 +size 143026 diff --git a/images/Shaft_00031.png b/images/Shaft_00031.png new file mode 100644 index 0000000000000000000000000000000000000000..1b7712f7fce6d11a215283b3d32f098e3c5c4414 --- /dev/null +++ b/images/Shaft_00031.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84c925d95a9aa8a3af5fccd45f20ffed21e3e9fee4f53a93ed3cd4c2a4705920 +size 118647 diff --git a/images/Shaft_00032.png b/images/Shaft_00032.png new file mode 100644 index 0000000000000000000000000000000000000000..fa24682fd12a561e0c38d8152ce89a597fdcaaae --- /dev/null +++ b/images/Shaft_00032.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d2f840069458231c72e8f6feb516e24613d9f984eafac60dd4432958194106e +size 158751 diff --git a/images/Shaft_00033.png b/images/Shaft_00033.png new file mode 100644 index 0000000000000000000000000000000000000000..04443cbe59aa8078084f36e6272df4cc9c1689d2 --- /dev/null +++ b/images/Shaft_00033.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f47968b80b1629a3ef97925cf1fca73bba940dac2b3420bbea6213156dd9ed25 +size 132739 diff --git a/images/Shaft_00034.png b/images/Shaft_00034.png new file mode 100644 index 0000000000000000000000000000000000000000..d15a4151f488bed61174018d544bccfec1686f87 --- /dev/null +++ b/images/Shaft_00034.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65b220930873c788787599c27983cce4df1314a636211b678a2336adcb506e72 +size 158318 diff --git a/images/Shaft_00035.png b/images/Shaft_00035.png new file mode 100644 index 0000000000000000000000000000000000000000..0c41ccac6d8cc42cbb4a4c11115a6fd8a87b153d --- /dev/null +++ b/images/Shaft_00035.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc97cb3f65deb3d7578a1c903c44ef01edf619a43be41374fedb72cdb545f4e9 +size 118906 diff --git a/images/Shaft_00036.png b/images/Shaft_00036.png new file mode 100644 index 0000000000000000000000000000000000000000..c108962a64baba2c843efd012b353f3e2984836d --- /dev/null +++ b/images/Shaft_00036.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b8b8f3766fa2fb05384e7f4b4870fed73e7f533a13ef3f543e303d2fcc6d07e +size 134601 diff --git a/images/Shaft_00037.png b/images/Shaft_00037.png new file mode 100644 index 0000000000000000000000000000000000000000..95874eb3870ed563ad1d06d944f4853e694df190 --- /dev/null +++ b/images/Shaft_00037.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd8b2250e76e7613f453c7a4f6d312362aa189d3a64ab9aab0549171c97f4bcd +size 120183 diff --git a/images/Shaft_00038.png b/images/Shaft_00038.png new file mode 100644 index 0000000000000000000000000000000000000000..9cbd8e52bf7619cff33d1a2c722822bdfbee1672 --- /dev/null +++ b/images/Shaft_00038.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13b0486b05202c7caf7000e705a7c1a053857cf2af7a8a898abf4b2ed898fded +size 144726 diff --git a/images/Shaft_00039.png b/images/Shaft_00039.png new file mode 100644 index 0000000000000000000000000000000000000000..13acc1a97958f6fd4d9d769192c2996d7df1ab95 --- /dev/null +++ b/images/Shaft_00039.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb6d5917cc41b44e76f0492cdaae9ac5f741d97d2941b89357a70d8b604aad0a +size 116575 diff --git a/images/Shaft_00040.png b/images/Shaft_00040.png new file mode 100644 index 0000000000000000000000000000000000000000..3d799545ec62f625b8cefe3ed3fdefad30ace1fa --- /dev/null +++ b/images/Shaft_00040.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dddfdfe3d2a8313dd2b945a3af5436e69938002a8c1c5e4216b911a6989f78a1 +size 149756 diff --git a/images/Shaft_00041.png b/images/Shaft_00041.png new file mode 100644 index 0000000000000000000000000000000000000000..83b46869c7e53f711fc58f023810618e347accfa --- /dev/null +++ b/images/Shaft_00041.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49d5fb895c586af9b5ec7500aa3546866b5907e3aeb4cc7e51f900160bedaf45 +size 131701 diff --git a/images/Shaft_00042.png b/images/Shaft_00042.png new file mode 100644 index 0000000000000000000000000000000000000000..75a0583aefa1444746c1eafb659fc96b2249e08e --- /dev/null +++ b/images/Shaft_00042.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da85eb50c3910562fd1fa190f5fd9c858bff98f164229297e5bb7a2644062584 +size 116865 diff --git a/images/Shaft_00043.png b/images/Shaft_00043.png new file mode 100644 index 0000000000000000000000000000000000000000..e7954d6680b995bf02144d2b2c062ec79dffdec0 --- /dev/null +++ b/images/Shaft_00043.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5f0a9d06e55c4198f6ee2f3aba2a4860318692dae2450703d5421f90f29d4ef +size 112867 diff --git a/images/Shaft_00044.png b/images/Shaft_00044.png new file mode 100644 index 0000000000000000000000000000000000000000..f55a52d1287b64ffc45a179fbe7c5ad12fe91781 --- /dev/null +++ b/images/Shaft_00044.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9485207fa2e6e729422fb0caf669a0e3d4dd125e31bcf8743281e89914e2569b +size 129505 diff --git a/images/Shaft_00045.png b/images/Shaft_00045.png new file mode 100644 index 0000000000000000000000000000000000000000..2cbb27b6055b5b063648fac4d3f3cfde30b3b3ad --- /dev/null +++ b/images/Shaft_00045.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2562ed9e00d47a7842b13e4b65618526e618ef35e52c6badf3358ef906375667 +size 126131 diff --git a/images/Shaft_00046.png b/images/Shaft_00046.png new file mode 100644 index 0000000000000000000000000000000000000000..5756bd6e0956eba79da528c833f066b514105b63 --- /dev/null +++ b/images/Shaft_00046.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fda7c0a0175daa35f2cefd05012bb63e294107f0bd04daed1fac3486d29fe86 +size 113845 diff --git a/images/Shaft_00047.png b/images/Shaft_00047.png new file mode 100644 index 0000000000000000000000000000000000000000..da98af832cb06b8e3d2c8cae75df22b41ff9bd44 --- /dev/null +++ b/images/Shaft_00047.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63e401ce7ee1e8dd17626f3786c5b412830a69706755bda298287211b44f39ba +size 113771 diff --git a/images/Shaft_00048.png b/images/Shaft_00048.png new file mode 100644 index 0000000000000000000000000000000000000000..68838a8e8a20d0bfb99555e2aa78f350bbe297ff --- /dev/null +++ b/images/Shaft_00048.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a38194b04607eeec1289cde17c0d4dfd92190e31f3f6d3f2facf9338ad2e7d80 +size 113833 diff --git a/images/Shaft_00049.png b/images/Shaft_00049.png new file mode 100644 index 0000000000000000000000000000000000000000..47175bb6d4038d402f8b6e275b52a0f5aeaee4f8 --- /dev/null +++ b/images/Shaft_00049.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:902a51429ecf388e2bbc2a3d6bc23a6a8fdad44f5ed5de190d5bf0748c50dd1e +size 114305 diff --git a/images/Shaft_00050.png b/images/Shaft_00050.png new file mode 100644 index 0000000000000000000000000000000000000000..14ab2f9f7f1133af1ddfec8e34d999d1945b46ec --- /dev/null +++ b/images/Shaft_00050.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1187652773c6dfd236079f19465a464ec94f9bbe224d0b1ffb8fc78a7d329e67 +size 133376 diff --git a/images/Shaft_00051.png b/images/Shaft_00051.png new file mode 100644 index 0000000000000000000000000000000000000000..6188cf66c81de9e6f5fe800e3e32369eaaf6b9ca --- /dev/null +++ b/images/Shaft_00051.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b7b0289cdcd66b07c2d70f2d6b3e16d81a15eda314a8703212f70888da36e93 +size 174607 diff --git a/images/Shaft_00052.png b/images/Shaft_00052.png new file mode 100644 index 0000000000000000000000000000000000000000..a52cafea72dd3425a6f18444baabf40ce77c274c --- /dev/null +++ b/images/Shaft_00052.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0974f0a77ca0a2240b07c534bfb20bc3a20d5ac5868313c84a40be03fbdcedad +size 126619 diff --git a/images/Shaft_00053.png b/images/Shaft_00053.png new file mode 100644 index 0000000000000000000000000000000000000000..847d44e85b08341c57f635d30eaf6aca00cbe663 --- /dev/null +++ b/images/Shaft_00053.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6dd655f7660ac02fc4493967f5539a86f6508eed8122a23d84c0e32ba2741b1 +size 133603 diff --git a/images/Shaft_00054.png b/images/Shaft_00054.png new file mode 100644 index 0000000000000000000000000000000000000000..caaae2d4941dcd9ef8689c64d5f6bbbd765da7d5 --- /dev/null +++ b/images/Shaft_00054.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c5a9cec33b1f6b0358a44bca58986e3b6a601edc0af1a87d171e134fd72d174 +size 127734 diff --git a/images/Shaft_00055.png b/images/Shaft_00055.png new file mode 100644 index 0000000000000000000000000000000000000000..357eddbfcd1b7f38be82737e355f7a3a0d4cc7ee --- /dev/null +++ b/images/Shaft_00055.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3115a4b00c042d277d1f299ac82a07f06d0f8b3dd07e733a4ad20288f69af3e3 +size 174510 diff --git a/images/Shaft_00056.png b/images/Shaft_00056.png new file mode 100644 index 0000000000000000000000000000000000000000..44a81cbf2b33d48b5bf3ade0c74bb9d8b873900b --- /dev/null +++ b/images/Shaft_00056.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:743bfe9fded3431fb5b6918da6996722698997ee1e51c92110eee31a5904f14d +size 135095 diff --git a/images/Shaft_00057.png b/images/Shaft_00057.png new file mode 100644 index 0000000000000000000000000000000000000000..79e454a687a44e7a3eaa3dadf6ba98fb813a8bfc --- /dev/null +++ b/images/Shaft_00057.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80e49ab80054ffe0ce8c5d8cd45ca21f122df72838f6e1a81a2f224426d36a09 +size 115816 diff --git a/images/Shaft_00058.png b/images/Shaft_00058.png new file mode 100644 index 0000000000000000000000000000000000000000..1f542b513115b7f425745f33d2476e134bad12ff --- /dev/null +++ b/images/Shaft_00058.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90b93f4794f06acbc606ded089146dc8ebef749150601f81beac770e41e7ba53 +size 129643 diff --git a/images/Shaft_00059.png b/images/Shaft_00059.png new file mode 100644 index 0000000000000000000000000000000000000000..13616b09d6d8395592b83a4227289cde6a5ad5f6 --- /dev/null +++ b/images/Shaft_00059.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ef3a555121469bf03d982b3391eee751d6966f1942af71b06f99f97820d6349 +size 146744 diff --git a/images/Shaft_00060.png b/images/Shaft_00060.png new file mode 100644 index 0000000000000000000000000000000000000000..54cea789a4ce14e95e932c120b5143436236e1ad --- /dev/null +++ b/images/Shaft_00060.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c8e808b64e961dda9ae141ffac926e1d5617a8f5d0c3e32f650219738e70343 +size 132067 diff --git a/images/Shaft_00061.png b/images/Shaft_00061.png new file mode 100644 index 0000000000000000000000000000000000000000..19111a48000f887e26708e7daa157b769bc0551b --- /dev/null +++ b/images/Shaft_00061.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff6da0f4f04a8e574790ff3e5bc441f9d7655821f47af17d1afef047ac9564f5 +size 122349 diff --git a/images/Shaft_00062.png b/images/Shaft_00062.png new file mode 100644 index 0000000000000000000000000000000000000000..5fdbb068cb2fbd93efeec2f61905733243e7c281 --- /dev/null +++ b/images/Shaft_00062.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:446c0cf0c582b0a9d9ca4e687e7c66684477b07310807bb0b0c8380bc1e08713 +size 160621 diff --git a/images/Shaft_00063.png b/images/Shaft_00063.png new file mode 100644 index 0000000000000000000000000000000000000000..305860ba1500ae6188055d157c081b58107a4a08 --- /dev/null +++ b/images/Shaft_00063.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b875b9d3cb6064f67870a345513cd5f7799ab5b1bab8d343506e2907e6ff4a5b +size 154173 diff --git a/images/Shaft_00064.png b/images/Shaft_00064.png new file mode 100644 index 0000000000000000000000000000000000000000..e37e17a8d8b5a10aaf64b00cfc78aacc6f09c688 --- /dev/null +++ b/images/Shaft_00064.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b549849499e2e32329784d80e225b0e968610fa58df3de0a8afed96af56a94f4 +size 141312 diff --git a/images/Shaft_00065.png b/images/Shaft_00065.png new file mode 100644 index 0000000000000000000000000000000000000000..f212a45c292ad73278aaee31272a6674b6f17845 --- /dev/null +++ b/images/Shaft_00065.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef3c2ce77341899c14671609f7ccc476b4947a3d30be0aa9bbacc9fb2e8f0129 +size 117403 diff --git a/images/Shaft_00066.png b/images/Shaft_00066.png new file mode 100644 index 0000000000000000000000000000000000000000..43fbcb131909a9c705ea6344a972635985ca0096 --- /dev/null +++ b/images/Shaft_00066.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fda25a84d815f4dd1bc6e4d9cbf2c3c152a8659e2c0fa70df0e67573098c0c8 +size 120979 diff --git a/images/Shaft_00067.png b/images/Shaft_00067.png new file mode 100644 index 0000000000000000000000000000000000000000..0a50fb8acd8ddd7232ebaeba4c3e2895db00c20b --- /dev/null +++ b/images/Shaft_00067.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78b81da4768c7ab4e84ab06f6482847823e0dfb17f863c5f7e187f3cd9c21752 +size 122548 diff --git a/images/Shaft_00068.png b/images/Shaft_00068.png new file mode 100644 index 0000000000000000000000000000000000000000..7af707b210666b7a1752b06dce028f42e9d134f0 --- /dev/null +++ b/images/Shaft_00068.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:055abbc8399d05b9f6d8386e20c0f9a78b979298fcdd8db86679062017e9c5e3 +size 120222 diff --git a/images/Shaft_00069.png b/images/Shaft_00069.png new file mode 100644 index 0000000000000000000000000000000000000000..f6501e35c3ca2e3a239932c89bc1977e307bda90 --- /dev/null +++ b/images/Shaft_00069.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:060d655e2773f20a781fb71188f92a89339f3aca9f536cdd0e7cad26ec002bd0 +size 119259 diff --git a/images/Shaft_00070.png b/images/Shaft_00070.png new file mode 100644 index 0000000000000000000000000000000000000000..693400118709cf2a6d3a8add4140b83864d02ec2 --- /dev/null +++ b/images/Shaft_00070.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d96e399178c203dfd85516cfab2638fd0b36cebd114aefa066ecaf317b7d9ad0 +size 112442 diff --git a/images/Shaft_00071.png b/images/Shaft_00071.png new file mode 100644 index 0000000000000000000000000000000000000000..b37fe7c088ba7412ffaf804fa8b04f645892e763 --- /dev/null +++ b/images/Shaft_00071.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:225b688ac626467cee939faf19f9553a1ef8b8cfe28925f3e60070dd10a0d1ec +size 137741 diff --git a/images/Shaft_00072.png b/images/Shaft_00072.png new file mode 100644 index 0000000000000000000000000000000000000000..5c6cb0975d87ed5a082a5d3729d689dd8286716e --- /dev/null +++ b/images/Shaft_00072.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:851a133e75c407d0381022e6339bc92283a8d92241c5e3073fd6a32108f39baf +size 148698 diff --git a/images/Shaft_00073.png b/images/Shaft_00073.png new file mode 100644 index 0000000000000000000000000000000000000000..3a91fc5d13b3a968e381c42bccbee07f7e5b2b6a --- /dev/null +++ b/images/Shaft_00073.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d42ca8a30eec7de563721b1b44b2a84ec28b77a5e7748dc9a86234bd6d7aa8fd +size 135409 diff --git a/images/Shaft_00074.png b/images/Shaft_00074.png new file mode 100644 index 0000000000000000000000000000000000000000..34a59cad8e14ce090cc69229ca3bf6456d8a541f --- /dev/null +++ b/images/Shaft_00074.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b22bf6804f6c8596976110ca1d56d4f11c15ae776cf64c036480e3ffa7b0d680 +size 137645 diff --git a/images/Shaft_00075.png b/images/Shaft_00075.png new file mode 100644 index 0000000000000000000000000000000000000000..660e690e481c59bd74d45ad804b41d29f5d74fb4 --- /dev/null +++ b/images/Shaft_00075.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44bcf387c8820630814d5af87345ea0c5f369a1f7b8b957712ebfafefab581b2 +size 146969 diff --git a/images/Shaft_00076.png b/images/Shaft_00076.png new file mode 100644 index 0000000000000000000000000000000000000000..0c801a4d8328bcc72376215ecb74b75ec843c148 --- /dev/null +++ b/images/Shaft_00076.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64a64b48883e7a282a4350670ac7139af53896cfcbf82cbbeaaf946adf567f0d +size 116973 diff --git a/images/Shaft_00077.png b/images/Shaft_00077.png new file mode 100644 index 0000000000000000000000000000000000000000..d01b901c422eb838ae6369d0783a8c027c00dcbb --- /dev/null +++ b/images/Shaft_00077.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f8a4356c14b640b48cca597ad3472e0e8eef66bd5d315658eede8aee6c6dade +size 142565 diff --git a/images/Shaft_00078.png b/images/Shaft_00078.png new file mode 100644 index 0000000000000000000000000000000000000000..bc755398bceca58219c79f9e156d3e6403552662 --- /dev/null +++ b/images/Shaft_00078.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ceec777ab8573fc5758055153b8ecdc03a04a5d93b1d4b22c9648becd113c0e +size 132163 diff --git a/images/Shaft_00079.png b/images/Shaft_00079.png new file mode 100644 index 0000000000000000000000000000000000000000..2dbc8631317ce6d017b91ca92d3842a9e7e77946 --- /dev/null +++ b/images/Shaft_00079.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea42de7763b0a512e4c2aff95a098d54afb53e3de19e504e2aa9a5bc7303134a +size 118024 diff --git a/images/Shaft_00080.png b/images/Shaft_00080.png new file mode 100644 index 0000000000000000000000000000000000000000..c793e8ea2f3872e3995a9993f55a1e9079ff3e6d --- /dev/null +++ b/images/Shaft_00080.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bbdf652eb186e57869236c37e67398edbdbd98bc055ef09010395617924b4bf +size 157696 diff --git a/images/Shaft_00081.png b/images/Shaft_00081.png new file mode 100644 index 0000000000000000000000000000000000000000..7b20269abe7aebcab4a09cf7b10c907558a24c53 --- /dev/null +++ b/images/Shaft_00081.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8980df97105d434fd6acdfd9eaafdab243d70b7621641022a7487cdae6576d1 +size 144864 diff --git a/images/Shaft_00082.png b/images/Shaft_00082.png new file mode 100644 index 0000000000000000000000000000000000000000..2c24cbc7cbc7d4401dc98046226e5f437e862c6d --- /dev/null +++ b/images/Shaft_00082.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3de6e25fc7e38317e9f9210086ad974ec3767ef15600e07174d88198fab03260 +size 142940 diff --git a/images/Shaft_00083.png b/images/Shaft_00083.png new file mode 100644 index 0000000000000000000000000000000000000000..181341a124b89fdc4b40790b468f634a9ab11056 --- /dev/null +++ b/images/Shaft_00083.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d1f7bca4b63a50487059b96f1160b74f45be3a53a282554e1aceeb949668131 +size 147455 diff --git a/images/Shaft_00084.png b/images/Shaft_00084.png new file mode 100644 index 0000000000000000000000000000000000000000..60e83040fd27969a390b45796911a54d2640f552 --- /dev/null +++ b/images/Shaft_00084.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffca21d32c9f16886b09a225c80f0418a980887505abe7112e9a4779b44b37d0 +size 121818 diff --git a/images/Shaft_00085.png b/images/Shaft_00085.png new file mode 100644 index 0000000000000000000000000000000000000000..7f5f2005b6eb67d22ab9d20abd38c492542503fb --- /dev/null +++ b/images/Shaft_00085.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51ddd8165c6e249be763048f86f047fcd81c0c5dc5fd29231e5da9caf3599372 +size 159999 diff --git a/images/Shaft_00086.png b/images/Shaft_00086.png new file mode 100644 index 0000000000000000000000000000000000000000..9d5fa85fd333fc2c12d5a3ddc427ca1a7249dc0d --- /dev/null +++ b/images/Shaft_00086.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d183d63b24d819583d233c0cca9d58715a1ca85224b7dd5e81a30f67700efb3 +size 150705 diff --git a/images/Shaft_00087.png b/images/Shaft_00087.png new file mode 100644 index 0000000000000000000000000000000000000000..930b7251eeffa84e52c181af07895804af183da9 --- /dev/null +++ b/images/Shaft_00087.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e36b638d613e4c4e14bd8363fa060770a7d1eaabe637ed82c4d3a9f147063df8 +size 138617 diff --git a/images/Shaft_00088.png b/images/Shaft_00088.png new file mode 100644 index 0000000000000000000000000000000000000000..ef33a0e29b6faa333815e4556bc1dacb4cd49d0f --- /dev/null +++ b/images/Shaft_00088.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98fc2e23c182d5207112a4d1de7565dad278956cfd8ededfd59020675113ca27 +size 95723 diff --git a/images/Shaft_00089.png b/images/Shaft_00089.png new file mode 100644 index 0000000000000000000000000000000000000000..6ae76d871f27d9f148a0901eae11583aeb1ef77a --- /dev/null +++ b/images/Shaft_00089.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0a67e41dc84c1938936803d7f41c9f611a3b7417920b3387e3765f8956f82b6 +size 81611 diff --git a/images/Shaft_00090.png b/images/Shaft_00090.png new file mode 100644 index 0000000000000000000000000000000000000000..1f9fe079b06821b36fb1efbeb33e20a7796d675b --- /dev/null +++ b/images/Shaft_00090.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c533e7a8f960f5eede2901a5e249ab425b19fd6bb51984f738351e9234d2cab +size 78751 diff --git a/images/Shaft_00091.png b/images/Shaft_00091.png new file mode 100644 index 0000000000000000000000000000000000000000..6ca4a62ee0e6203f374f630f4c57577b252c224f --- /dev/null +++ b/images/Shaft_00091.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53d515a40a52aabc4c769a9a2a3a1d8aee8f9c944f554d96b7a0969b94688a11 +size 86574 diff --git a/images/Shaft_00092.png b/images/Shaft_00092.png new file mode 100644 index 0000000000000000000000000000000000000000..8dde0a71165e422993cb5fb68c43367c97c7076f --- /dev/null +++ b/images/Shaft_00092.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:860f994372bdc1262a6b556f8694f8175272d26e2e508e6435b8dafdd38f3504 +size 103340 diff --git a/images/Shaft_00093.png b/images/Shaft_00093.png new file mode 100644 index 0000000000000000000000000000000000000000..f4e90fbf3b594754b74eb7f65da1f3712ec836a1 --- /dev/null +++ b/images/Shaft_00093.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e3c15e398fc869006f84b64a48174bd7f134cc6119d36a049bb2bf642029706 +size 114468 diff --git a/images/Shaft_00094.png b/images/Shaft_00094.png new file mode 100644 index 0000000000000000000000000000000000000000..67ac10573954192c5aa4d303a06dc5cd02db7969 --- /dev/null +++ b/images/Shaft_00094.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:039addad7ab3f7d062be3d9175c760049f5ab3021f80c45bd4cbbb6a8fbdd082 +size 96990 diff --git a/images/Shaft_00095.png b/images/Shaft_00095.png new file mode 100644 index 0000000000000000000000000000000000000000..e1bc01515c8419350e8f7fc82d5d1b74bb9a70d2 --- /dev/null +++ b/images/Shaft_00095.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41d284ea805eb5fbf03cc618fed0620729e17986f70ed33f67658a87773fdc83 +size 100486 diff --git a/images/Shaft_00096.png b/images/Shaft_00096.png new file mode 100644 index 0000000000000000000000000000000000000000..7cd9dc0f167ec81e924c58d0adae29a9906e5710 --- /dev/null +++ b/images/Shaft_00096.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:523a8434e85164849c22dc12dbe45135518b6a7a317ea58a9043064fc7e48cd2 +size 98674 diff --git a/images/Shaft_00097.png b/images/Shaft_00097.png new file mode 100644 index 0000000000000000000000000000000000000000..e3260124d9f6bb2523cebf7c5d1bc266cbf588b0 --- /dev/null +++ b/images/Shaft_00097.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:024010035388e3c89258f95bdb24e96452a3561bb64ab4dd0786c675d1d2a8e0 +size 81835 diff --git a/images/Shaft_00098.png b/images/Shaft_00098.png new file mode 100644 index 0000000000000000000000000000000000000000..39482d276bac32b391b3e7785a45264aac04d52f --- /dev/null +++ b/images/Shaft_00098.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5cb4f5ca135e9842bde8bfa3470787681624e8f2c482981aa25296eb62280f70 +size 93487 diff --git a/images/Shaft_00099.png b/images/Shaft_00099.png new file mode 100644 index 0000000000000000000000000000000000000000..cbdbe408a9035f24480a8563df84aa1b03f52137 --- /dev/null +++ b/images/Shaft_00099.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6007259ad9c681fa2caea9f48b49e2a6a224065edccd6abaa880180ee902db91 +size 87309 diff --git a/images/Shaft_00100.png b/images/Shaft_00100.png new file mode 100644 index 0000000000000000000000000000000000000000..c362cd8850dd72493f72f04ccbcc90b2573ed626 --- /dev/null +++ b/images/Shaft_00100.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e610eb4aefe4332efa6c9ab273dceb6659684c90f14a7836de5726a9c8e44bb +size 71409 diff --git a/images/Shaft_00101.png b/images/Shaft_00101.png new file mode 100644 index 0000000000000000000000000000000000000000..afb5205464270f2a0291e4c70429ca2197e4044d --- /dev/null +++ b/images/Shaft_00101.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dd8096a6504ec6f9c54014748e6a280ff16343ae1ca054427b842673e0efab7 +size 86463 diff --git a/images/Shaft_00102.png b/images/Shaft_00102.png new file mode 100644 index 0000000000000000000000000000000000000000..8960c82b9742dee73add28a1daa2da272e8dd6aa --- /dev/null +++ b/images/Shaft_00102.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:475d1ec9e4689ac9b2cb3268a72cb8014664a8f07c394565b376d1fe2d3f2c2d +size 105222 diff --git a/images/Shaft_00103.png b/images/Shaft_00103.png new file mode 100644 index 0000000000000000000000000000000000000000..924669d36e7fb084a6656ad4d90cd95b8a1a2cea --- /dev/null +++ b/images/Shaft_00103.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ee443e64aa5cf91008d1d13aa1d3b6a4331ea0687ccc1a974a36203601c6046 +size 97086 diff --git a/images/Shaft_00104.png b/images/Shaft_00104.png new file mode 100644 index 0000000000000000000000000000000000000000..8b8cba42c2bc9e98bee28dd294162f5d805e53c4 --- /dev/null +++ b/images/Shaft_00104.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cfd8c85f43271a65d8ba3b71da96f01bc1582c64285cef4c3385d67a7df52cc +size 90329 diff --git a/images/Shaft_00105.png b/images/Shaft_00105.png new file mode 100644 index 0000000000000000000000000000000000000000..fc9594e2d557bfeaa22fa10e5f79e314f0d53da5 --- /dev/null +++ b/images/Shaft_00105.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33b3a0c5c017114d1c17417b22eb87e6ef39e4059f88eb33daf80f9abd59ba5d +size 76490 diff --git a/images/Shaft_00106.png b/images/Shaft_00106.png new file mode 100644 index 0000000000000000000000000000000000000000..b1290d858beeee49b36b839a7cb7990f6071b473 --- /dev/null +++ b/images/Shaft_00106.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baab24d26901bdc7a38c64b590c0d0bf9cf5001ffd1e87740e043275a5f17567 +size 73722 diff --git a/images/Shaft_00107.png b/images/Shaft_00107.png new file mode 100644 index 0000000000000000000000000000000000000000..cf77fd81061dffb2799bfbf21efc487f51de168c --- /dev/null +++ b/images/Shaft_00107.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:100432ac827d46830c7dc7e7ca1d9150dc09b371b3937e4f6090e7bcc460d9db +size 73404 diff --git a/images/Shaft_00108.png b/images/Shaft_00108.png new file mode 100644 index 0000000000000000000000000000000000000000..2d1c0a4ce90f843f76fd465e0db8e5ccd6d49412 --- /dev/null +++ b/images/Shaft_00108.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9276cd2c046712daf0643d1dde196186a400160a9dd112198fcb17769e05d9c +size 87200 diff --git a/images/Shaft_00109.png b/images/Shaft_00109.png new file mode 100644 index 0000000000000000000000000000000000000000..215e3b360123766443d018a7a8607706b67fd71b --- /dev/null +++ b/images/Shaft_00109.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2355fcda85004618c1bb453b3c3aac9cb761dfec906f7a1825a1bf7ae6153040 +size 87669 diff --git a/images/Shaft_00110.png b/images/Shaft_00110.png new file mode 100644 index 0000000000000000000000000000000000000000..864153f97e3d49d9b8544b32bd82d7b72076158a --- /dev/null +++ b/images/Shaft_00110.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5401b24ccd706268518738312cfc61f83e4af17469d3acd434f1b50abcc6f496 +size 84942 diff --git a/images/Shaft_00111.png b/images/Shaft_00111.png new file mode 100644 index 0000000000000000000000000000000000000000..14364b26f5b0f0b037705d07863fd70a47ff5a02 --- /dev/null +++ b/images/Shaft_00111.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ab2d2606968fa0e268bae3a9b7d2b89db91785a1c204325b58b06d6d912b0f7 +size 67357 diff --git a/images/Shaft_00112.png b/images/Shaft_00112.png new file mode 100644 index 0000000000000000000000000000000000000000..84829c7ac5c1804b78e405847908e74f09395ac5 --- /dev/null +++ b/images/Shaft_00112.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58673545798e9d3a9fd54b2d72a708beecf17b5f9ec00b9d3452b2dc49819ac6 +size 84375 diff --git a/images/Shaft_00113.png b/images/Shaft_00113.png new file mode 100644 index 0000000000000000000000000000000000000000..ea8f67d14319a8f21d88e9e89197a6ecb39c6722 --- /dev/null +++ b/images/Shaft_00113.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfb309102bd7c56d3ab0b51b9417cf2f56312d2cc9a48b99023b3d2a4a61cd7f +size 69322 diff --git a/images/Shaft_00114.png b/images/Shaft_00114.png new file mode 100644 index 0000000000000000000000000000000000000000..bd01f1c33c5ed2b7850833b5148b695ecdb667e7 --- /dev/null +++ b/images/Shaft_00114.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2a9503aa8654b32130a7fb5bb8712a54419e07d3eaddb6ade6281d3b282ca70 +size 73370 diff --git a/images/Shaft_00115.png b/images/Shaft_00115.png new file mode 100644 index 0000000000000000000000000000000000000000..886fef1ce2549a31da6d8d005e82c61499155336 --- /dev/null +++ b/images/Shaft_00115.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25a2f479ac0cba0ca74abd8523e1bdb3890d873a5c8932bb9f0a486a9e0df596 +size 94617 diff --git a/images/Shaft_00116.png b/images/Shaft_00116.png new file mode 100644 index 0000000000000000000000000000000000000000..4b0bdc9077355cbba1748946866789d15a42feba --- /dev/null +++ b/images/Shaft_00116.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81f98e926a8ba7bd77dc1a2fd208c7c588f0f234f52c8f56aa3b6c69b8d097c5 +size 70750 diff --git a/images/Shaft_00117.png b/images/Shaft_00117.png new file mode 100644 index 0000000000000000000000000000000000000000..560ab3baba0b35fe2f08e8d609ae7f66eb3d5639 --- /dev/null +++ b/images/Shaft_00117.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f066f7a1c7419f83489f79e7003fd7331c83bf6b297074275e0701045954c14 +size 113580 diff --git a/images/Shaft_00118.png b/images/Shaft_00118.png new file mode 100644 index 0000000000000000000000000000000000000000..212b1a369139c13434410f94acd45c051fd2c160 --- /dev/null +++ b/images/Shaft_00118.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4216292ee31e0d1403b33e4368de093b04e3d88841440006afdacc7722b1ccbb +size 89929 diff --git a/images/Shaft_00119.png b/images/Shaft_00119.png new file mode 100644 index 0000000000000000000000000000000000000000..0f06ec09e7d569a03d526ff38963e05a68722bb4 --- /dev/null +++ b/images/Shaft_00119.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d90328035739872d5d58b43e636863cfbb4fd5cf1fdc44a0e84733d7921ad018 +size 78575 diff --git a/images/Shaft_00120.png b/images/Shaft_00120.png new file mode 100644 index 0000000000000000000000000000000000000000..57e59b67cd17a8b9e3dfd6224d93a179a982cda7 --- /dev/null +++ b/images/Shaft_00120.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6009ada9414017f6753d266a5e8f166f784393e02c68f72efa21d3d757352e4e +size 97159 diff --git a/images/Shaft_00121.png b/images/Shaft_00121.png new file mode 100644 index 0000000000000000000000000000000000000000..05d95393a73e41ce8b281d90e213bd4e8cf6a0aa --- /dev/null +++ b/images/Shaft_00121.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b37a1ef2f2fb07ff2dc03fc72e3be1951c7471faa28c3ecd3b191f9973c99d43 +size 90719 diff --git a/images/Shaft_00122.png b/images/Shaft_00122.png new file mode 100644 index 0000000000000000000000000000000000000000..f4677f47b7d5a7c2d7e87e11145293bcb5e0149a --- /dev/null +++ b/images/Shaft_00122.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c92fd586dde432dceff1e4bd143c13b0c43a8af00972ab276c1a0f4dff13932 +size 97683 diff --git a/images/Shaft_00123.png b/images/Shaft_00123.png new file mode 100644 index 0000000000000000000000000000000000000000..07efd6eb2f47623d9db1d9228dad934c32de52cd --- /dev/null +++ b/images/Shaft_00123.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38fd3557a8e773ffbc4ba08b45f632ee1d520f9e489607a82a21e99838c705b0 +size 116840 diff --git a/images/Shaft_00124.png b/images/Shaft_00124.png new file mode 100644 index 0000000000000000000000000000000000000000..c2219a122198653f45903b599da1b8881ad0a2cd --- /dev/null +++ b/images/Shaft_00124.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fea817a7667476db44871e764bfb097836fe96c2a5627112684f065cb947a32d +size 72858 diff --git a/images/Shaft_00125.png b/images/Shaft_00125.png new file mode 100644 index 0000000000000000000000000000000000000000..93e135a2a505548b9bf5b6dd06e3075fd5a4fd1f --- /dev/null +++ b/images/Shaft_00125.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b365ddd37d932f7db3cae2034ff167422c9279f0c8d5fc5cb7d148fc7f15640 +size 72739 diff --git a/images/Shaft_00126.png b/images/Shaft_00126.png new file mode 100644 index 0000000000000000000000000000000000000000..754dc188b3182e5a57f4ae3db8073ab251cb5e89 --- /dev/null +++ b/images/Shaft_00126.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d532dc857c63d7b41e1a2e705688487da364e320779ef14b8b2c1baf2b6ce2d8 +size 80664 diff --git a/images/Shaft_00127.png b/images/Shaft_00127.png new file mode 100644 index 0000000000000000000000000000000000000000..263a85ff11ef7cf35bd87547c46dc97dd69875df --- /dev/null +++ b/images/Shaft_00127.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f739e55c3676a14b2b2f66b1b1aced08d834b52c907436bfc1a19308f4757e3 +size 68944 diff --git a/images/Shaft_00128.png b/images/Shaft_00128.png new file mode 100644 index 0000000000000000000000000000000000000000..28ceb6c92567c480ee40362286c360d588eb98db --- /dev/null +++ b/images/Shaft_00128.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bdcea725680e1ca390701adcc1b2875d023b791e2bdb3d35fbbd4d3dfd20838 +size 87368 diff --git a/images/Shaft_00129.png b/images/Shaft_00129.png new file mode 100644 index 0000000000000000000000000000000000000000..bb769db1b15480ecb4b0664190575504f2248b22 --- /dev/null +++ b/images/Shaft_00129.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99fdf50ddfa7f4b6d6746a41099209af2e72cde792e34743bdab7d5b2abce846 +size 77428 diff --git a/images/Shaft_00130.png b/images/Shaft_00130.png new file mode 100644 index 0000000000000000000000000000000000000000..36e4374a05b1956c61e3141f56ec24fc50d6b664 --- /dev/null +++ b/images/Shaft_00130.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d56830c8e1b80a77d5caeff8c79be9bb97395d08e2876a63714523ab47c3cfc +size 95285 diff --git a/images/Shaft_00131.png b/images/Shaft_00131.png new file mode 100644 index 0000000000000000000000000000000000000000..c5122e6155d45cdd36d0188ece90f250dbeb505d --- /dev/null +++ b/images/Shaft_00131.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:689706d0671c9a1bcc9573b277958eb913650bebc136c866dc153bee99481f14 +size 86539 diff --git a/images/Shaft_00132.png b/images/Shaft_00132.png new file mode 100644 index 0000000000000000000000000000000000000000..6ee47a663c04a49437b067403c398d5850eca29d --- /dev/null +++ b/images/Shaft_00132.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05af216596b6ee4d8d91e9bf444c2f5bcaa426e2bbab35d82c8605143d1febc7 +size 103473 diff --git a/images/Shaft_00133.png b/images/Shaft_00133.png new file mode 100644 index 0000000000000000000000000000000000000000..6124d42b995d1b2d8ab4626554d48e41bf44e75e --- /dev/null +++ b/images/Shaft_00133.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:137a38ef3ab7934e14234d8829bb596aeb0e8260bfbe9fc3d9c00e5ae9e591ca +size 71154 diff --git a/images/Shaft_00134.png b/images/Shaft_00134.png new file mode 100644 index 0000000000000000000000000000000000000000..344b63a2bdb4e871390ae0a7e25fe563628c9738 --- /dev/null +++ b/images/Shaft_00134.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3936c1df1a70bb25ec6b13a93be6f43d35eee9c9b50d76105fcea8744de3aaa +size 87358 diff --git a/images/Shaft_00135.png b/images/Shaft_00135.png new file mode 100644 index 0000000000000000000000000000000000000000..e6c8a90bd51ea3ba5a8682fdf3da327bb94b0560 --- /dev/null +++ b/images/Shaft_00135.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cca4669101363695fe423db6194d41bcd7966110d46a12a818053e1fce88697a +size 75168 diff --git a/images/Shaft_00136.png b/images/Shaft_00136.png new file mode 100644 index 0000000000000000000000000000000000000000..6cda0311eac84bd0b73dc4cc242f6b5dc6aa0d34 --- /dev/null +++ b/images/Shaft_00136.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1610f23a1b1255a44e0422f2b7036a230ad1eb2e3ca8a7732d7b8933751668b1 +size 70973 diff --git a/images/Shaft_00137.png b/images/Shaft_00137.png new file mode 100644 index 0000000000000000000000000000000000000000..89cec68b18cff16242bcfda70e3856afd30429c1 --- /dev/null +++ b/images/Shaft_00137.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9dd694299daa4ac0906b93242d79ae03247a1d6c1803841b982dcb126855019 +size 103127 diff --git a/images/Shaft_00138.png b/images/Shaft_00138.png new file mode 100644 index 0000000000000000000000000000000000000000..2529777bde5c443204bc31030bc90a5d9bfa7071 --- /dev/null +++ b/images/Shaft_00138.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fa088c73916da3f7133ce93f794b4e28e9f3a34d87ef6302e0af75d2d5fca3d +size 87680 diff --git a/images/Shaft_00139.png b/images/Shaft_00139.png new file mode 100644 index 0000000000000000000000000000000000000000..b02dd0f6de91c7386ae3a9b576a124d799c74ced --- /dev/null +++ b/images/Shaft_00139.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94aecea65f50211a3b5f4d532c00268114ad8a95c62476a27da49751b0ba68e4 +size 81209 diff --git a/images/Shaft_00140.png b/images/Shaft_00140.png new file mode 100644 index 0000000000000000000000000000000000000000..799a9076a8bcf720659568aa94a9fc46885c4602 --- /dev/null +++ b/images/Shaft_00140.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c142b939c22b5b1b8ac1762c3a26466ab974e96aa16942003740a1ea6c5c2c6f +size 117240 diff --git a/images/Shaft_00141.png b/images/Shaft_00141.png new file mode 100644 index 0000000000000000000000000000000000000000..6511854f393a755795bb5036f54a7d33401795da --- /dev/null +++ b/images/Shaft_00141.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ab24f99c3ebe4e8b0886c226a9755b5d777b02f9719428953b34e5d029da9b9 +size 95470 diff --git a/images/Shaft_00142.png b/images/Shaft_00142.png new file mode 100644 index 0000000000000000000000000000000000000000..8da4c347b8c1b3163c0107b26952b274ccc92c91 --- /dev/null +++ b/images/Shaft_00142.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2f9b6588335d4c2de7c64a116939732791d3101bfc80ebd4dba5e47acf9fd2b +size 78405 diff --git a/images/Shaft_00143.png b/images/Shaft_00143.png new file mode 100644 index 0000000000000000000000000000000000000000..6bd8b3f1dcc74d330e61ce7d32687e9e47336e99 --- /dev/null +++ b/images/Shaft_00143.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66fcf1bf0c86204289bf50318e7508b50df8afda672ab939f3441143f3809068 +size 91767 diff --git a/images/Shaft_00144.png b/images/Shaft_00144.png new file mode 100644 index 0000000000000000000000000000000000000000..65516531b5fdd66e58d591cd95ddbf382f31fb9b --- /dev/null +++ b/images/Shaft_00144.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0ec15a524bed95ebe1854bceb7fc54234a73b6d5d5d93dc7ccff17c2aafaef4 +size 71880 diff --git a/images/Shaft_00145.png b/images/Shaft_00145.png new file mode 100644 index 0000000000000000000000000000000000000000..2f27bb6b814a0ca4af8d4e03560723245939efbc --- /dev/null +++ b/images/Shaft_00145.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:770ba79dd6e1ce1a3535f06398dbb5895df8184be437fcf6e9a2e9808406f851 +size 101327 diff --git a/images/Shaft_00146.png b/images/Shaft_00146.png new file mode 100644 index 0000000000000000000000000000000000000000..1a37477e36188e60e4c3e91cae638159f8dac0e4 --- /dev/null +++ b/images/Shaft_00146.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f1a09a461fc6e4fd8a3080c7773038112e73d96582ff028514ea29572a46c17 +size 101912 diff --git a/images/Shaft_00147.png b/images/Shaft_00147.png new file mode 100644 index 0000000000000000000000000000000000000000..f0a261a28ef23e333f7c8692f9f86e6b5d826a66 --- /dev/null +++ b/images/Shaft_00147.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2216bebc1ccb32bd24005a7f22210be4d3a2bc63eaa2d9d5b7a27ff36f2ba74f +size 79775 diff --git a/images/Shaft_00148.png b/images/Shaft_00148.png new file mode 100644 index 0000000000000000000000000000000000000000..f4e5833b169e4e1e10b6aea88578553466c35ba5 --- /dev/null +++ b/images/Shaft_00148.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e51278fef2e12c20572439b5da9d7fc8f663e9b4c142fc2fc153ce6148b78207 +size 92525 diff --git a/images/Shaft_00149.png b/images/Shaft_00149.png new file mode 100644 index 0000000000000000000000000000000000000000..c27e701e6e2c187e8de209401a954ea31937c029 --- /dev/null +++ b/images/Shaft_00149.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16b9bfe53183a678d2d37530aade4c93c5f7f79ebcdb5dc9a2fda8af0d5ea82a +size 83895 diff --git a/images/Shaft_00150.png b/images/Shaft_00150.png new file mode 100644 index 0000000000000000000000000000000000000000..0e50b8dc9e9862b3b05b5762752a9cc1622dc63b --- /dev/null +++ b/images/Shaft_00150.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd6e7a5c5f83fc4066aa25a32618f11374653365155e2c8872f430438dddcd7b +size 69541 diff --git a/images/Shaft_00151.png b/images/Shaft_00151.png new file mode 100644 index 0000000000000000000000000000000000000000..9f75d138cfa2161b2e7bfc87366f858c581f2b49 --- /dev/null +++ b/images/Shaft_00151.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78fcbd2ff1b06040d7235705c64a434ae2d0399dca7bf051bbc3f82941c21242 +size 76319 diff --git a/images/Shaft_00152.png b/images/Shaft_00152.png new file mode 100644 index 0000000000000000000000000000000000000000..b7ea14dbc9ddfb366221a9c1b65fc612c0935388 --- /dev/null +++ b/images/Shaft_00152.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52b0ec108ab6ad7337353a4f820e900eda038ec11d2a301e4f0ea1d28b879e96 +size 89542 diff --git a/images/Shaft_00153.png b/images/Shaft_00153.png new file mode 100644 index 0000000000000000000000000000000000000000..69912d539770971125d7037ac7308fa2ab7d75e9 --- /dev/null +++ b/images/Shaft_00153.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31cec88f768e270c01558a7efab1c0e65a8960824db53ac015d045f058452ee8 +size 92130 diff --git a/images/Shaft_00154.png b/images/Shaft_00154.png new file mode 100644 index 0000000000000000000000000000000000000000..95b879596d674eedc12d92444547c675282f8da8 --- /dev/null +++ b/images/Shaft_00154.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d848b51ca89c15370b5b442af80275869ee442dc485a01e670f4ca9a0a7027ef +size 71720 diff --git a/images/Shaft_00155.png b/images/Shaft_00155.png new file mode 100644 index 0000000000000000000000000000000000000000..779aebf28ef08d23dd76fd9b42d27c28d5ceb336 --- /dev/null +++ b/images/Shaft_00155.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e18c356af1bd5db4f4320aa657fe3fac8788dbc5d2da50ea7de53c76a43050f5 +size 87308 diff --git a/images/Shaft_00156.png b/images/Shaft_00156.png new file mode 100644 index 0000000000000000000000000000000000000000..86d404e7abae6473a9718ccc8ff9cc8a1388b483 --- /dev/null +++ b/images/Shaft_00156.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f311f29f0424c9ea2dda57af01b7fd14f23040a6a595d1f39d979a65bc397aa4 +size 83836 diff --git a/images/Shaft_00157.png b/images/Shaft_00157.png new file mode 100644 index 0000000000000000000000000000000000000000..dbe7d26530bd0d0f750ca2381b5482979fe10308 --- /dev/null +++ b/images/Shaft_00157.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6bc230cdf6a72ff0e1874cb1bfcbcb76ebfb10215470c2953d5006ffea831984 +size 99942 diff --git a/images/Shaft_00158.png b/images/Shaft_00158.png new file mode 100644 index 0000000000000000000000000000000000000000..9dcb6e9919b4a584a409c4c307a0ab2d54b34a26 --- /dev/null +++ b/images/Shaft_00158.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab1a5ca802f29f837408f495fa8b00a2f38de9746cfe833f57d0be563ddf0461 +size 78264 diff --git a/images/Shaft_00159.png b/images/Shaft_00159.png new file mode 100644 index 0000000000000000000000000000000000000000..de6501447b58b2e5808c1692eb7d07c608d1d1d1 --- /dev/null +++ b/images/Shaft_00159.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04a7f5146f0a6ac9691f1119551da2b1a3a2f9619e7b88475d4778463486a7d6 +size 105820 diff --git a/images/Shaft_00160.png b/images/Shaft_00160.png new file mode 100644 index 0000000000000000000000000000000000000000..6b750c974527f6e3f001c5ec24fe55be49e0f6ed --- /dev/null +++ b/images/Shaft_00160.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:955b326bfbaa4ebf40a5fb327df284967d7a2476bc8d4ddf27e9626291021815 +size 69300 diff --git a/images/Shaft_00161.png b/images/Shaft_00161.png new file mode 100644 index 0000000000000000000000000000000000000000..7be638c5bfdaf4dd34fee9f509d76cb1a1a7fe90 --- /dev/null +++ b/images/Shaft_00161.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:323e25d379143df47e99b1e34d2a2f701b6fb0a33cc7aa789f99dee8e1e46a5f +size 70294 diff --git a/images/Shaft_00162.png b/images/Shaft_00162.png new file mode 100644 index 0000000000000000000000000000000000000000..c9081efca0245046e811e264e1b266cc19f28942 --- /dev/null +++ b/images/Shaft_00162.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebc106e5ccc1cef69f1cb955393cd6da2dc1db9eb485a11251555983908a6f5a +size 94499 diff --git a/images/Shaft_00163.png b/images/Shaft_00163.png new file mode 100644 index 0000000000000000000000000000000000000000..35f176bbe37ef82a8ed012343152dcef88551845 --- /dev/null +++ b/images/Shaft_00163.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffb87e26e36e99619655fb504b3ab54d99f5868e59ff46f1a10bde6f88ebe3c1 +size 71032 diff --git a/images/Shaft_00164.png b/images/Shaft_00164.png new file mode 100644 index 0000000000000000000000000000000000000000..caef2e49060e09d49ca687951193a3746936fdf7 --- /dev/null +++ b/images/Shaft_00164.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a7b0fb4a6b18fa981eb2a196f89174334465797ccb4c1f9cc1d36b83cee8f43 +size 95986 diff --git a/images/Shaft_00165.png b/images/Shaft_00165.png new file mode 100644 index 0000000000000000000000000000000000000000..2e4f021795af4d8de97012c46067542d9296fb18 --- /dev/null +++ b/images/Shaft_00165.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc25d11dee079c570003f21c51c436b1894368b0539023f1bf41b83f50a6dae4 +size 84223 diff --git a/images/Shaft_00166.png b/images/Shaft_00166.png new file mode 100644 index 0000000000000000000000000000000000000000..7dfc0f3063176f2c6ce0a9189d1d2675e85a9bb1 --- /dev/null +++ b/images/Shaft_00166.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c83d933caf57a888d32f9776ebda8a30d772067e134fe2bec532c968e3720c64 +size 96571 diff --git a/images/Shaft_00167.png b/images/Shaft_00167.png new file mode 100644 index 0000000000000000000000000000000000000000..2b9faf652ec5e0311ee940f43988c7860f7fe8b8 --- /dev/null +++ b/images/Shaft_00167.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d99acf8c6bbb7feae4a9e80f243518b58a9d315db6761331f064c6af55fcfb6 +size 83873 diff --git a/images/Shaft_00168.png b/images/Shaft_00168.png new file mode 100644 index 0000000000000000000000000000000000000000..4009023049da66d63b6b5090cdb6437b225ae7e8 --- /dev/null +++ b/images/Shaft_00168.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd8250b3991cbcf59efcacdcd1c67ea68d32170e5635ff0673c1555cd9f734b8 +size 84084 diff --git a/images/Shaft_00169.png b/images/Shaft_00169.png new file mode 100644 index 0000000000000000000000000000000000000000..ae79a76d3aed9d7e739e36a1b1cbc1b302c16d1c --- /dev/null +++ b/images/Shaft_00169.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:613f73abe1148bd7cc03d8546052b9dd1f994cc02b808b53aa46e9a7ea3bdb91 +size 89163 diff --git a/images/Shaft_00170.png b/images/Shaft_00170.png new file mode 100644 index 0000000000000000000000000000000000000000..a2c6e3c1b971b5b47ba25e0b25b17da909cb9a97 --- /dev/null +++ b/images/Shaft_00170.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:540ad4e63a838003897953b0fcc3bad1d0ec5c6e7c4635ac988e240a0d19107a +size 81160 diff --git a/images/Shaft_00171.png b/images/Shaft_00171.png new file mode 100644 index 0000000000000000000000000000000000000000..e5f712bbccc6e2911e62c710df21cf744c8e2aa7 --- /dev/null +++ b/images/Shaft_00171.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7264b646094b29fd87bf23988202d800df35a1c3bbe123dd686435c586403f63 +size 96712 diff --git a/images/Shaft_00172.png b/images/Shaft_00172.png new file mode 100644 index 0000000000000000000000000000000000000000..1fbb05737a1d8b20ef01b1906bc32002188f6238 --- /dev/null +++ b/images/Shaft_00172.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06dbd12b6e6565e59e260ec8a222ff3f90779cdfac5ee7ce03145be05065c780 +size 74131 diff --git a/images/Shaft_00173.png b/images/Shaft_00173.png new file mode 100644 index 0000000000000000000000000000000000000000..c682ebc88bfc0812d9c940837d5a64315ee1ec21 --- /dev/null +++ b/images/Shaft_00173.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64c7339011860d571834e61ffceb3cc7068beba264cce15cf287740c5360a51f +size 68042 diff --git a/images/Shaft_00174.png b/images/Shaft_00174.png new file mode 100644 index 0000000000000000000000000000000000000000..a5beb3d12417573d46352c166842d1db178e15c9 --- /dev/null +++ b/images/Shaft_00174.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9abac026b9019cd79d3c6e42ffd3498e7cf53f9aabd9a6133d63bd5769fa1d94 +size 89432 diff --git a/images/Shaft_00175.png b/images/Shaft_00175.png new file mode 100644 index 0000000000000000000000000000000000000000..498f402544c22cd11302df2df90162572a540357 --- /dev/null +++ b/images/Shaft_00175.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aac16dad8217704dfe2cd999e48e98b837d6c9104d9d39f2ea057f49c63415fc +size 72168 diff --git a/images/Shaft_00176.png b/images/Shaft_00176.png new file mode 100644 index 0000000000000000000000000000000000000000..98d526a56cde8f2b9a2542b16000c88f9cf25b65 --- /dev/null +++ b/images/Shaft_00176.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7103ce8ee5f07166dfc76686315475502d268bacc83ec41e9735016d96135605 +size 71506 diff --git a/images/Shaft_00177.png b/images/Shaft_00177.png new file mode 100644 index 0000000000000000000000000000000000000000..a067125a5e218f0a0f86fc7ed840f9aedffda6fe --- /dev/null +++ b/images/Shaft_00177.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d1469029b82f2c4b5eb0f0af174e8f4f265aa65a674bc1063721f8957874619 +size 74258 diff --git a/images/Shaft_00178.png b/images/Shaft_00178.png new file mode 100644 index 0000000000000000000000000000000000000000..96eca694509a52d14944b69ab959f2c9f3e28f97 --- /dev/null +++ b/images/Shaft_00178.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1aa3cbb0254325ded945a7291d906991d2f8d944932acf03b6bbeb32ea48ba9c +size 70382 diff --git a/images/Shaft_00179.png b/images/Shaft_00179.png new file mode 100644 index 0000000000000000000000000000000000000000..ec2b15ab1b680c5f8fe99d32ade4a7205049ec5d --- /dev/null +++ b/images/Shaft_00179.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78a5af45573a0c1ac34c51643c2a58861117cc7b939a67fcdd858473a5209bda +size 71570 diff --git a/images/Shaft_00180.png b/images/Shaft_00180.png new file mode 100644 index 0000000000000000000000000000000000000000..1f44ca6ba4bd910c9c066ebd6bb6d7a1ec186be2 --- /dev/null +++ b/images/Shaft_00180.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff99dad4395dd28c5cc6398dad105f2ae51f51e4ef0795d7c69d2d1189963eec +size 114355 diff --git a/images/Shaft_00181.png b/images/Shaft_00181.png new file mode 100644 index 0000000000000000000000000000000000000000..a4403d2a1ff6f33de685d29d34afe496e36dc193 --- /dev/null +++ b/images/Shaft_00181.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f847018bc61728294b4e2b19dd29d75ac2dd57805eda8a47ec5b6f14ec3a922e +size 78602 diff --git a/images/Shaft_00182.png b/images/Shaft_00182.png new file mode 100644 index 0000000000000000000000000000000000000000..03be95a370467c1bbf476906f40ba98be7a8f90e --- /dev/null +++ b/images/Shaft_00182.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b00978329054f6ef7028123936d47c221cd6fee9ffd69158688bada053689a66 +size 104568 diff --git a/images/Shaft_00183.png b/images/Shaft_00183.png new file mode 100644 index 0000000000000000000000000000000000000000..5054d68ecf7b9bcced42c241a19d0db30f93b9f6 --- /dev/null +++ b/images/Shaft_00183.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6961c734d54bf88a561223ba62752578f0e6a1746c054cee3506d0c2e61e8c52 +size 87711 diff --git a/images/Shaft_00184.png b/images/Shaft_00184.png new file mode 100644 index 0000000000000000000000000000000000000000..7183e7a1660fd840fc648452d3a02c8f8655bdf4 --- /dev/null +++ b/images/Shaft_00184.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e40e76f862dc774f78cfdf5576d04e7a472cb4e28e681e8460fcb13d01a96456 +size 85191 diff --git a/images/Shaft_00185.png b/images/Shaft_00185.png new file mode 100644 index 0000000000000000000000000000000000000000..6dae9be207b7c8a6057231befdd83a857aa87cb3 --- /dev/null +++ b/images/Shaft_00185.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:312e7d7585527bd63618370326646c81f588fc527f8316657531ad0244337ccf +size 87777 diff --git a/images/Shaft_00186.png b/images/Shaft_00186.png new file mode 100644 index 0000000000000000000000000000000000000000..f62d5b9fab77a01e4dba03e0f2ee37a238fc6702 --- /dev/null +++ b/images/Shaft_00186.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4317e93eef4d7ebdadf40d0f3647baa85dc028f07187da1a0e5e34ccdb340fc5 +size 89729 diff --git a/images/Shaft_00187.png b/images/Shaft_00187.png new file mode 100644 index 0000000000000000000000000000000000000000..4f6f2c6d5869337f508f88f34c7f8d11dcf513c5 --- /dev/null +++ b/images/Shaft_00187.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40de03ccb49116933159918bb1141d449115fb1fa0de1a5f0843bdc38552f079 +size 87121 diff --git a/images/Shaft_00188.png b/images/Shaft_00188.png new file mode 100644 index 0000000000000000000000000000000000000000..01e6d5f5133a9980c4f133807d4e7a38b0ca25d9 --- /dev/null +++ b/images/Shaft_00188.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c834c5cab419273dc746f201e1b13665c90b5e55d8cff6b8b8be6c686341f669 +size 86223 diff --git a/images/Shaft_00189.png b/images/Shaft_00189.png new file mode 100644 index 0000000000000000000000000000000000000000..b5beb29ceff84e26db40cf5a8fbb532acb311c83 --- /dev/null +++ b/images/Shaft_00189.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:032be69ab5ef43d2f65cb037dd3fbdfbdcf811dc38907c2a2c03240526822b82 +size 80434 diff --git a/images/Shaft_00190.png b/images/Shaft_00190.png new file mode 100644 index 0000000000000000000000000000000000000000..edd7e92c9828bba12feebfccd3b4d401954cee55 --- /dev/null +++ b/images/Shaft_00190.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5840d262eccb1d740b16632eed4e20b2644d45b22fedd36de5027f01ddff40f5 +size 88632 diff --git a/images/Shaft_00191.png b/images/Shaft_00191.png new file mode 100644 index 0000000000000000000000000000000000000000..9d3568e29b997344dac6f18f774336122a89b04b --- /dev/null +++ b/images/Shaft_00191.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:608fd03fabad81c4960116e41aa01403bbd5b50920955bebea1b040abe0e3ff5 +size 82274 diff --git a/images/Shaft_00192.png b/images/Shaft_00192.png new file mode 100644 index 0000000000000000000000000000000000000000..513e51a88632220809437a899f2a1938ba147196 --- /dev/null +++ b/images/Shaft_00192.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9339993705be4e66cce6e98ca74ac2b0508aa9dd46fa0ea66df9c68faff3d8af +size 81921 diff --git a/images/Shaft_00193.png b/images/Shaft_00193.png new file mode 100644 index 0000000000000000000000000000000000000000..350e46463a8028addb3e2fd6d61704faacb437e0 --- /dev/null +++ b/images/Shaft_00193.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56aa7a2058568f7412476f802eca22550c680c275dbcbdc88254adacb6532629 +size 79345 diff --git a/images/Shaft_00194.png b/images/Shaft_00194.png new file mode 100644 index 0000000000000000000000000000000000000000..c9536d1bc4a3cbea12b4404472f8d68000fc7b85 --- /dev/null +++ b/images/Shaft_00194.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5dc8315fbf473942076f43ba731056a349a29fcf192338ac6eb7f8cb50e366a3 +size 77595 diff --git a/images/Shaft_00195.png b/images/Shaft_00195.png new file mode 100644 index 0000000000000000000000000000000000000000..7202eb4473437f01f17a42661352b6d42bff2546 --- /dev/null +++ b/images/Shaft_00195.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5faf763760fcc33490608b7e15691fc0168e0a8bcfd6883da9fb960b173470ff +size 103269 diff --git a/images/Shaft_00196.png b/images/Shaft_00196.png new file mode 100644 index 0000000000000000000000000000000000000000..4818fa80821939d373b27c3fa68a6b8ea67648d9 --- /dev/null +++ b/images/Shaft_00196.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d78d29689399bb69e2c9d6550f030355873e0e70384dad580b4845b86e1c1b6c +size 71534 diff --git a/images/Shaft_00197.png b/images/Shaft_00197.png new file mode 100644 index 0000000000000000000000000000000000000000..76c87435756fae300b94bff8937967fbdae68123 --- /dev/null +++ b/images/Shaft_00197.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:566e4d09bbd2d284766f1309d047714b49152b100e3387b7154d0596e3dcc094 +size 93229 diff --git a/images/Shaft_00198.png b/images/Shaft_00198.png new file mode 100644 index 0000000000000000000000000000000000000000..a83e85263957235c868116910a433cac22b3b239 --- /dev/null +++ b/images/Shaft_00198.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d20d74d0aec0178232288d0bbef45e8501bcd169b3ca2818e1ee77efdc8835a7 +size 93441 diff --git a/images/Shaft_00199.png b/images/Shaft_00199.png new file mode 100644 index 0000000000000000000000000000000000000000..535c21b6b88913f9fd1aadbc60672d3d9e4d40cd --- /dev/null +++ b/images/Shaft_00199.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:533de2bfe82cfad07eb4fc24267982cc319730479367398e5f34400930a12afb +size 73773 diff --git a/images/Shaft_00200.png b/images/Shaft_00200.png new file mode 100644 index 0000000000000000000000000000000000000000..797db2cf7bf606574f984afb94997141815e5e4f --- /dev/null +++ b/images/Shaft_00200.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ffcf0913ed1d0b5060083f3bdd6de44d96e99073d17015f5809b1c6cc98a40a +size 77781 diff --git a/images/Shaft_00201.png b/images/Shaft_00201.png new file mode 100644 index 0000000000000000000000000000000000000000..b2a328a1c84b7a03f42439d36330ae26fffc5bfd --- /dev/null +++ b/images/Shaft_00201.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b25ee3fcb089f02f09220a1ddccb2f94027945439bb8ed3223e42989920f9900 +size 102298 diff --git a/images/Shaft_00202.png b/images/Shaft_00202.png new file mode 100644 index 0000000000000000000000000000000000000000..592336236f2e79a1f62ac7e890839d517d1b3ffa --- /dev/null +++ b/images/Shaft_00202.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7c2706ad67ccda9603cd0c994213d8085c41e0a1e7d0829dfcf10da99adaf2c +size 82751 diff --git a/images/Shaft_00203.png b/images/Shaft_00203.png new file mode 100644 index 0000000000000000000000000000000000000000..4cc336d98ab42212fe41218cdc8a5e5d65283782 --- /dev/null +++ b/images/Shaft_00203.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c5fe5699043f8526a09f3d41179c05749b6b362f1839309791131f35b20f9ae +size 81828 diff --git a/images/Shaft_00204.png b/images/Shaft_00204.png new file mode 100644 index 0000000000000000000000000000000000000000..f70b197fc8d9b35c1b1eac9e0e8b70adfb2c74e0 --- /dev/null +++ b/images/Shaft_00204.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9243d5f7ce4868673e238c7415a30f2720bc8c48fdae1ff8e2bf19af1fb8e099 +size 101174 diff --git a/images/Shaft_00205.png b/images/Shaft_00205.png new file mode 100644 index 0000000000000000000000000000000000000000..5f62c5e02fba16e668a7f3c3b9183df52fbf8239 --- /dev/null +++ b/images/Shaft_00205.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8b5aeea16e533079ea4cdb71df234ea51e6e142698dc60d57559c2046aca7a4 +size 94281 diff --git a/images/Shaft_00206.png b/images/Shaft_00206.png new file mode 100644 index 0000000000000000000000000000000000000000..99ca615e41702d6f866248f4fbc285e3dd0732a5 --- /dev/null +++ b/images/Shaft_00206.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0fdbc722712e7e679a7c617db8e1f2bebe3b77205f84470a6f821d774522c74 +size 85964 diff --git a/images/Shaft_00207.png b/images/Shaft_00207.png new file mode 100644 index 0000000000000000000000000000000000000000..5706f1ca0f4b625158b8a46a9423ed5fd4df0af7 --- /dev/null +++ b/images/Shaft_00207.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f7d7978539cf5ddc6441a1b09a83c8d5818736b326dc10bcb3b793116bd4f87 +size 78469 diff --git a/images/Shaft_00208.png b/images/Shaft_00208.png new file mode 100644 index 0000000000000000000000000000000000000000..25522568e5b69789eac4703d75353722553c9bc5 --- /dev/null +++ b/images/Shaft_00208.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:954c092f8fb972c2c4c95e92467925c3872ffc0f3f069d5a5df2490f42204a91 +size 94786 diff --git a/images/Shaft_00209.png b/images/Shaft_00209.png new file mode 100644 index 0000000000000000000000000000000000000000..0e10fbb01d8d291c1e88578fb7a2175a5b82d886 --- /dev/null +++ b/images/Shaft_00209.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:416ef90385d0da688ed1d70449567ea2b41005f79d7b43184748c871e79f6692 +size 84121 diff --git a/images/Shaft_00210.png b/images/Shaft_00210.png new file mode 100644 index 0000000000000000000000000000000000000000..589ebb4db97f60d103afa3aabd4668e62fdd8a07 --- /dev/null +++ b/images/Shaft_00210.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c74237229c32a38abb6dcf870bdb4121b255f779d66ced23fbb273e416dedb4 +size 99399 diff --git a/images/Shaft_00211.png b/images/Shaft_00211.png new file mode 100644 index 0000000000000000000000000000000000000000..569787e5e442a9e11291b81f64107e4c44ab115b --- /dev/null +++ b/images/Shaft_00211.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7f780f797159e4f3951aeebbe41995895ef13a6c2c7f88f52126410a36c4f32 +size 71678 diff --git a/images/Shaft_00212.png b/images/Shaft_00212.png new file mode 100644 index 0000000000000000000000000000000000000000..03af15a89fef60df14cd7e3e78e8d3d3dfa43325 --- /dev/null +++ b/images/Shaft_00212.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2018ec8b4230037935b52351de8cbd306e15aab4027c8e1a31d0090788c60fa +size 88987 diff --git a/images/Shaft_00213.png b/images/Shaft_00213.png new file mode 100644 index 0000000000000000000000000000000000000000..09337044f6230d063aeddf9f9f839fe40acb2e8d --- /dev/null +++ b/images/Shaft_00213.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:987089037f5740d0e80beaa10142bb8fa90ffb42fad2382331526d7a8ec9bbfc +size 111456 diff --git a/images/Shaft_00214.png b/images/Shaft_00214.png new file mode 100644 index 0000000000000000000000000000000000000000..6fcc2a4bb43f9a0ef53c1234e262b3c3f4815ade --- /dev/null +++ b/images/Shaft_00214.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2696b246217175f4b3ebf1cb797f23065911b26febce3f99219bbc8e5ea21c6e +size 65200 diff --git a/images/Shaft_00215.png b/images/Shaft_00215.png new file mode 100644 index 0000000000000000000000000000000000000000..3e10e303cb02c72e5429a402d976bfa733506457 --- /dev/null +++ b/images/Shaft_00215.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73eac24bde8331a0a461887afa637ad04fd70633408a6c37572deefb6f49c52b +size 101574 diff --git a/images/Shaft_00216.png b/images/Shaft_00216.png new file mode 100644 index 0000000000000000000000000000000000000000..961577e1e85ac990c6ba4bc6fa5f343a43f21cf2 --- /dev/null +++ b/images/Shaft_00216.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:813b9b39fb21d6bd86b0c98ac2bc6f3cdceb05ad031c155a0b58ee56f79c3e61 +size 101005 diff --git a/images/Shaft_00217.png b/images/Shaft_00217.png new file mode 100644 index 0000000000000000000000000000000000000000..306b771a4d83e9110f4d4a1978b75c8f1f7db79d --- /dev/null +++ b/images/Shaft_00217.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38da01940387c736a39670162d1c9edfd933a627605880c884ed3c8bda10b1f6 +size 91077 diff --git a/images/Shaft_00218.png b/images/Shaft_00218.png new file mode 100644 index 0000000000000000000000000000000000000000..943c2e1e6ae83b395a17c04abaaf6243a6b187f5 --- /dev/null +++ b/images/Shaft_00218.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06bcde8cba823f50370203debbc8941bd6f32983c96cf732bbc1057d735a4d93 +size 89151 diff --git a/images/Shaft_00219.png b/images/Shaft_00219.png new file mode 100644 index 0000000000000000000000000000000000000000..8a347254215617ce1ae4141f2083855a8ae6c3ba --- /dev/null +++ b/images/Shaft_00219.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:047df9846896771309716fe43af03ec8c779a0a225fffd6f99d0f5c22a84aabe +size 69802 diff --git a/images/Shaft_00220.png b/images/Shaft_00220.png new file mode 100644 index 0000000000000000000000000000000000000000..f55bf57708bf48949e323f1eba96546469ad1311 --- /dev/null +++ b/images/Shaft_00220.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61bcd188f8b0501aed618e2ce81182826cf042bc8f7c4e2b8d7c336023e054e6 +size 73669 diff --git a/images/Shaft_00221.png b/images/Shaft_00221.png new file mode 100644 index 0000000000000000000000000000000000000000..ba95d844416677843b325e824cb4727033b53537 --- /dev/null +++ b/images/Shaft_00221.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d5f07e882313fd139d32e2a2e182f1f825292b497d14634a38cb6a52c5feba5 +size 88587 diff --git a/images/Shaft_00222.png b/images/Shaft_00222.png new file mode 100644 index 0000000000000000000000000000000000000000..1ee701cc35deef7870fb71aab5824dc1802b1bf1 --- /dev/null +++ b/images/Shaft_00222.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:945b0c674c064a75e9318e984fe2138189259297bcf4674ccc47858683415643 +size 74276 diff --git a/images/Shaft_00223.png b/images/Shaft_00223.png new file mode 100644 index 0000000000000000000000000000000000000000..af3caf06efca85338502f4c124fc74777d1b7929 --- /dev/null +++ b/images/Shaft_00223.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22f63bad95682524a73cc2e733431e1381c1eda9610320e3032427256d8e05f1 +size 75034 diff --git a/images/Shaft_00224.png b/images/Shaft_00224.png new file mode 100644 index 0000000000000000000000000000000000000000..66adfdecd18ae9641b8ca5ee5ce5c953c90fbc32 --- /dev/null +++ b/images/Shaft_00224.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b7248fe2886628e681fc3fd75dd0cfbb6d58e7e88425b7e7dfa0089fa6c03df +size 86354 diff --git a/images/Shaft_00225.png b/images/Shaft_00225.png new file mode 100644 index 0000000000000000000000000000000000000000..2e7b3731169a2e4309f7c19ae2685bea91930e00 --- /dev/null +++ b/images/Shaft_00225.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbee770cb4668905b5a32b88ed889e0b454c04b0e23f534e4f7802f8b756ee97 +size 81292 diff --git a/images/Shaft_00226.png b/images/Shaft_00226.png new file mode 100644 index 0000000000000000000000000000000000000000..44d7e09463713cdc278a7c5384a206bfd4b7f349 --- /dev/null +++ b/images/Shaft_00226.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa858b0eb76440237619c426f2578fde11241fd5cde58b21416a1106bf566770 +size 89785 diff --git a/images/Shaft_00227.png b/images/Shaft_00227.png new file mode 100644 index 0000000000000000000000000000000000000000..bea522f5edcb775d504f709a22022fd746cb527c --- /dev/null +++ b/images/Shaft_00227.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1fdf41648dc52b97e506185966465f4677111377e5f8cf262aaaea5fb3f99e7 +size 82908 diff --git a/images/Shaft_00228.png b/images/Shaft_00228.png new file mode 100644 index 0000000000000000000000000000000000000000..63d8fbfd147ce8003fc75225b7c26d8222e82df9 --- /dev/null +++ b/images/Shaft_00228.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ac2e4416b43e468fc16130c21578696fcb8ccf7fa2ef3a7f949f8c444c6b4fe +size 86139 diff --git a/images/Shaft_00229.png b/images/Shaft_00229.png new file mode 100644 index 0000000000000000000000000000000000000000..88810bc950a6451315db114a9e17de91e3ae4a05 --- /dev/null +++ b/images/Shaft_00229.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cecf179d23ebd3c23c53b07d2762d80f704610cb26de455fa49ba6ffbd1bb694 +size 69658 diff --git a/images/Shaft_00230.png b/images/Shaft_00230.png new file mode 100644 index 0000000000000000000000000000000000000000..8a54cfc5193dc5f639f8bea931a328ae941efd0e --- /dev/null +++ b/images/Shaft_00230.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57b3c0c9f33c568bb4966f72573bf1ff77b59a0b56861723342346fca71d2dd1 +size 79987 diff --git a/images/Shaft_00231.png b/images/Shaft_00231.png new file mode 100644 index 0000000000000000000000000000000000000000..4a9362832f056df042b3dd9f5b69e9865bf64001 --- /dev/null +++ b/images/Shaft_00231.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03c1adeff808ef7e25e41ee7fbf9db3a48d3e4501c060ba94d7aae0af79d0c2f +size 91077 diff --git a/images/Shaft_00232.png b/images/Shaft_00232.png new file mode 100644 index 0000000000000000000000000000000000000000..d2bd81fbc7923117551595995a8bd4cdd8f47559 --- /dev/null +++ b/images/Shaft_00232.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1c4ab7b3b57246961235184d30afe009d9d179d655f205cc52d154db9d2ae89 +size 74554 diff --git a/images/Shaft_00233.png b/images/Shaft_00233.png new file mode 100644 index 0000000000000000000000000000000000000000..c9e28313c49bb8dddab810a77f2efd082fe6babc --- /dev/null +++ b/images/Shaft_00233.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:093ba0c95f38e0f7e17d94c9cd4721fbd51ee7c1aeeca6942ecc323026903381 +size 83696 diff --git a/images/Shaft_00234.png b/images/Shaft_00234.png new file mode 100644 index 0000000000000000000000000000000000000000..059284a89b6d81cc53e74522dbe542b58c9e3f64 --- /dev/null +++ b/images/Shaft_00234.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9d1dbbb46dab2dd64d46d50d1a4b57f7abab85044705cd60feb3fbde846480f +size 70188 diff --git a/images/Shaft_00235.png b/images/Shaft_00235.png new file mode 100644 index 0000000000000000000000000000000000000000..ab9c1dd787c1f0b04ef6a4d95fc7f0fa600eabd0 --- /dev/null +++ b/images/Shaft_00235.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c322e404b0e1f0dcc4e1d586bf3461777fafd790660313ac4f92c85d6aa524e2 +size 95120 diff --git a/images/Shaft_00236.png b/images/Shaft_00236.png new file mode 100644 index 0000000000000000000000000000000000000000..6655cf62397ee68f2656369cd40d73ac6b540ee9 --- /dev/null +++ b/images/Shaft_00236.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83d3b7b7da9005f60e2a183c9c85eaa61a135b7af31eb0b6285cba2fe7f546fa +size 96849 diff --git a/images/Shaft_00237.png b/images/Shaft_00237.png new file mode 100644 index 0000000000000000000000000000000000000000..87187f45edc3126f3feec7d42c2df040ba237f75 --- /dev/null +++ b/images/Shaft_00237.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b29b9955688684520a7b685ed97aae02112a92e66358a8e2c22bc5b0add0b48 +size 111727 diff --git a/images/Shaft_00238.png b/images/Shaft_00238.png new file mode 100644 index 0000000000000000000000000000000000000000..5ff6714ba34a7dae00b0fd71a072a670a8c53681 --- /dev/null +++ b/images/Shaft_00238.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:985d941f5f65cdb2d56641eb6e4486861de6db20934f76df93e4351c3fe309ff +size 92733 diff --git a/images/Shaft_00239.png b/images/Shaft_00239.png new file mode 100644 index 0000000000000000000000000000000000000000..6b47b6039fe035c0e0553fe2a73ac59a177e9dfd --- /dev/null +++ b/images/Shaft_00239.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aac07c31d4994dc85b6b743d3a839ffbe9bdecfd482a3a5f921fd8e30a44739 +size 69559 diff --git a/images/Shaft_00240.png b/images/Shaft_00240.png new file mode 100644 index 0000000000000000000000000000000000000000..427ed28952827f31f8891c09302d3691ae549ad8 --- /dev/null +++ b/images/Shaft_00240.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a98177f0fc92a3333862aba44396aaa4afa561acdf5913925f9931b26eb8cff4 +size 89503 diff --git a/images/Shaft_00241.png b/images/Shaft_00241.png new file mode 100644 index 0000000000000000000000000000000000000000..cd002667009af05abe2135dc43ee7c7218860314 --- /dev/null +++ b/images/Shaft_00241.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2c5777db0c8edc393ca68d096dd2174df481ff6242c80d1dab462bde021b0bc +size 101502 diff --git a/images/Shaft_00242.png b/images/Shaft_00242.png new file mode 100644 index 0000000000000000000000000000000000000000..f31b9629797bd74bbda7dad3ab9f411cc0751587 --- /dev/null +++ b/images/Shaft_00242.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b49ec804a0ed33f35a0f7b218259468ecb63490292f3c0be80e5481ebc16213 +size 87174 diff --git a/images/Shaft_00243.png b/images/Shaft_00243.png new file mode 100644 index 0000000000000000000000000000000000000000..d8245623d460660269e98a0a86d77ffb27d1f5c0 --- /dev/null +++ b/images/Shaft_00243.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf921ad9356917a6645c3cce22982dbcbd7f9de883adc3baead8f3b4c053499f +size 111033 diff --git a/images/Shaft_00244.png b/images/Shaft_00244.png new file mode 100644 index 0000000000000000000000000000000000000000..120c44087315270ee583cf859b44682f351953d4 --- /dev/null +++ b/images/Shaft_00244.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b60b0454d7381f89c09f79c04ec89d1a7d2a000380e0e0fc36d212425ecefc60 +size 108773 diff --git a/images/Shaft_00245.png b/images/Shaft_00245.png new file mode 100644 index 0000000000000000000000000000000000000000..90b2c2647083479226c26c8c0b4af647a9d6e218 --- /dev/null +++ b/images/Shaft_00245.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1bad583c56b4799edafb9f09ae08f33bd0df5efe2957c241573d12bf01a6599 +size 91827 diff --git a/images/Shaft_00246.png b/images/Shaft_00246.png new file mode 100644 index 0000000000000000000000000000000000000000..645a64fc63a2413d1a5f6719123ef8bb0e03e055 --- /dev/null +++ b/images/Shaft_00246.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7981cc167d480a5b3a18808a58412a63c1444fa5e301ff3635f131abd5827607 +size 81490 diff --git a/images/Shaft_00247.png b/images/Shaft_00247.png new file mode 100644 index 0000000000000000000000000000000000000000..2f251f30af430afb02f5904ecf1a69e4c0b46d2c --- /dev/null +++ b/images/Shaft_00247.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7453ed8aff63d14a01a8f8036f2a95e7dd8427160c6f954f2bdcf5a06890f935 +size 91500 diff --git a/images/Shaft_00248.png b/images/Shaft_00248.png new file mode 100644 index 0000000000000000000000000000000000000000..bd7ae202e1bba0144f6415f5608f29986eeafa26 --- /dev/null +++ b/images/Shaft_00248.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:536be18e8e004fa3b9676ac154e95ffd8573427e15b41f41d630308b3d1fba48 +size 89787 diff --git a/images/Shaft_00249.png b/images/Shaft_00249.png new file mode 100644 index 0000000000000000000000000000000000000000..1bc90bb68a6a0dbfd8ff415393414e76e1664f90 --- /dev/null +++ b/images/Shaft_00249.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac11caaa0d046d68283540ebdadc7c3b8533716fbf1a7f2b30ab3670ed9572ce +size 99032 diff --git a/images/Shaft_00250.png b/images/Shaft_00250.png new file mode 100644 index 0000000000000000000000000000000000000000..3837c492c84d59f535a21d27cc9207ea18c27e7b --- /dev/null +++ b/images/Shaft_00250.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4562b56283a856299022a953c3cd4d6aa0abee6c0ba043b68d5dbd1a5224c098 +size 75254 diff --git a/images/Shaft_00251.png b/images/Shaft_00251.png new file mode 100644 index 0000000000000000000000000000000000000000..61eb07dac6a44f9def9fdab8dcc1460a89a41d99 --- /dev/null +++ b/images/Shaft_00251.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0818734761bd168c0ce4bf7225ab8cb3c6861cef92b90db58f45a7293ae22d5b +size 100124 diff --git a/images/Shaft_00252.png b/images/Shaft_00252.png new file mode 100644 index 0000000000000000000000000000000000000000..bb3d91a969f38ba354aa484b8ab55e66deabab36 --- /dev/null +++ b/images/Shaft_00252.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3a157c30621aac23149272a40b164978eac049de90c34398ee81c3f55adc9d2 +size 103409 diff --git a/images/Shaft_00253.png b/images/Shaft_00253.png new file mode 100644 index 0000000000000000000000000000000000000000..681f0c67af30405f4fcbf513251afb4b495318dc --- /dev/null +++ b/images/Shaft_00253.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3577cfe50e03750b9207a21eb511da2034faec648a1f064e3f3d6d07cc1f57e +size 81797 diff --git a/images/Shaft_00254.png b/images/Shaft_00254.png new file mode 100644 index 0000000000000000000000000000000000000000..61d76c03d02ba96fa410a5e29bfc21fa00c4ba5d --- /dev/null +++ b/images/Shaft_00254.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea95f1537ced98b3140e0cd64be6be70b7e7b1e9c225199410f4dcc8437a14c4 +size 88825 diff --git a/images/Shaft_00255.png b/images/Shaft_00255.png new file mode 100644 index 0000000000000000000000000000000000000000..581fcf128931575699e7eda74886639de600d2b1 --- /dev/null +++ b/images/Shaft_00255.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e45ff8a71f0ae4036fb714b6bb483d3845e72d9a5b6ac15a74d986aa80a0077f +size 71975 diff --git a/images/Shaft_00256.png b/images/Shaft_00256.png new file mode 100644 index 0000000000000000000000000000000000000000..056de9235f7b22fb465069ee08aae264b6d8d142 --- /dev/null +++ b/images/Shaft_00256.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca17f00fcd48e8ad2001ed7ea5ab77060e609e6f75122f18a000357a03aab9e7 +size 79491 diff --git a/images/Shaft_00257.png b/images/Shaft_00257.png new file mode 100644 index 0000000000000000000000000000000000000000..a260930e9d18655669fceb5f4ea8df43b3685e43 --- /dev/null +++ b/images/Shaft_00257.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ea641c845e497cb34a1c3163f1411a97b084822a5f00d5bdfd954feaff2f974 +size 92088 diff --git a/images/Shaft_00258.png b/images/Shaft_00258.png new file mode 100644 index 0000000000000000000000000000000000000000..39e47eae79e8d09148215b9b3538510bb986927b --- /dev/null +++ b/images/Shaft_00258.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0485b604a8f8209759dea8b8f0bcbfed4594ec47dfe7d697056fb2d508ca79ed +size 103089 diff --git a/images/Shaft_00259.png b/images/Shaft_00259.png new file mode 100644 index 0000000000000000000000000000000000000000..50ea34e687298f12d269bace5655227a0bbe6aa1 --- /dev/null +++ b/images/Shaft_00259.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4310d77988c6d626fc96500597b09096da1adbe2d92509278c36616991b24559 +size 118700 diff --git a/images/Shaft_00260.png b/images/Shaft_00260.png new file mode 100644 index 0000000000000000000000000000000000000000..188d9d01b8f2ee096d25d27bb527ebb87b2c4889 --- /dev/null +++ b/images/Shaft_00260.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e6a0e4ae32bc5276e01478042cb47eb13783c9f55b1daacdb69d5ac218fd726 +size 68904 diff --git a/images/Shaft_00261.png b/images/Shaft_00261.png new file mode 100644 index 0000000000000000000000000000000000000000..90ccb13a4e162c0cb869d74a682b1e9629df04ae --- /dev/null +++ b/images/Shaft_00261.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e9b9e5f83cf4788aeafe9d296d3560e84e15c50b8d46883b9872fef8919e377 +size 91055 diff --git a/images/Shaft_00262.png b/images/Shaft_00262.png new file mode 100644 index 0000000000000000000000000000000000000000..c9201e2b54b1bf0cb6d1a3cd887dac791bcc27f4 --- /dev/null +++ b/images/Shaft_00262.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0ba9ee3acf01637528f63995bf285e01357084bed1891aaa0dc5c3e0e71315a +size 82465 diff --git a/images/Shaft_00263.png b/images/Shaft_00263.png new file mode 100644 index 0000000000000000000000000000000000000000..0450c6659bc4d250cd72fcb78d80adf9877faae7 --- /dev/null +++ b/images/Shaft_00263.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95ef409792016406480c7f91049ad5eb3c03d4879d4df0a892842bc206481b19 +size 83765 diff --git a/images/Shaft_00264.png b/images/Shaft_00264.png new file mode 100644 index 0000000000000000000000000000000000000000..d0423810064d03d444884fe6c4383dd9d3aa54f7 --- /dev/null +++ b/images/Shaft_00264.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdc1d3b2379352182720d5bd297de2735bc3478b40d04fc37377335a60aa9a92 +size 89366 diff --git a/images/Shaft_00265.png b/images/Shaft_00265.png new file mode 100644 index 0000000000000000000000000000000000000000..fd7faa122e9cdaf3b353e788e1c9d8e2a186b08f --- /dev/null +++ b/images/Shaft_00265.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43a651243f6c7d57227dbaa2b17de2dba9b0bcd5fe4c4d9041e667097052ed6e +size 72685 diff --git a/images/Shaft_00266.png b/images/Shaft_00266.png new file mode 100644 index 0000000000000000000000000000000000000000..6d2e611a905c4f059c1c525b9cce893239b05bd0 --- /dev/null +++ b/images/Shaft_00266.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:021acbe8a02a66917c26cf5d81bb0489eca5bdc51a673918a6090ad5468309ef +size 96311 diff --git a/images/Shaft_00267.png b/images/Shaft_00267.png new file mode 100644 index 0000000000000000000000000000000000000000..b289e93836f0121cbbdc6b86405a399826f3e8ab --- /dev/null +++ b/images/Shaft_00267.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c92a8371403483721966642c3ca47b9f57a09cf318a21da8d52862fe3087600 +size 101536 diff --git a/images/Shaft_00268.png b/images/Shaft_00268.png new file mode 100644 index 0000000000000000000000000000000000000000..6b39bd2505de79b06c8330d2e143dd2eb866f782 --- /dev/null +++ b/images/Shaft_00268.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e26bd7b0fd4a627de8cc6cb546e19a4f9ea4892178dab8e8ca544ad0ae841ebf +size 75997 diff --git a/images/Shaft_00269.png b/images/Shaft_00269.png new file mode 100644 index 0000000000000000000000000000000000000000..0eabf288286340a239df195b401d8faab8d9d71a --- /dev/null +++ b/images/Shaft_00269.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2883e2eadc6189354d968c2a5b123667dc48e67803aedf4520b0332989e5c328 +size 88359 diff --git a/images/Shaft_00270.png b/images/Shaft_00270.png new file mode 100644 index 0000000000000000000000000000000000000000..77e0faed68818e7915b5462c7cfabf4d6362ac89 --- /dev/null +++ b/images/Shaft_00270.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05bfe29e36fcb6139cc8678874bd188a17d32973471f14631dd98c94c9ca2dd3 +size 88603 diff --git a/images/Shaft_00271.png b/images/Shaft_00271.png new file mode 100644 index 0000000000000000000000000000000000000000..ded77b46e072899a2cacd20517d6756aece6e3bb --- /dev/null +++ b/images/Shaft_00271.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10523cba978bb76af9c1d1b2e84d5c8048e80e8c550ccf927f896de4c3a2eeb6 +size 79862 diff --git a/images/Shaft_00272.png b/images/Shaft_00272.png new file mode 100644 index 0000000000000000000000000000000000000000..8e125284f436a8af1df693cb4833cc38f31fbb9a --- /dev/null +++ b/images/Shaft_00272.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0afc3e2a2495f8e55856fe454de73ba34a764efb755823f5b0cc31c678f7495f +size 79907 diff --git a/images/Shaft_00273.png b/images/Shaft_00273.png new file mode 100644 index 0000000000000000000000000000000000000000..deccff26e58d545f3d9f4186e81fae8b35554e4f --- /dev/null +++ b/images/Shaft_00273.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fb3554ff0f2b49d95ed4bf53b3c7984628defd7664c57aa91aacc668e14ef20 +size 110072 diff --git a/images/Shaft_00274.png b/images/Shaft_00274.png new file mode 100644 index 0000000000000000000000000000000000000000..27e7aac3b7be7a763077572240883bdb89541d85 --- /dev/null +++ b/images/Shaft_00274.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4369f1102b107d70453e93d75d5c2720067710c898534c4f77f42ed55a8123c0 +size 85568 diff --git a/images/Shaft_00275.png b/images/Shaft_00275.png new file mode 100644 index 0000000000000000000000000000000000000000..e219c0fee13dcdf7e82051f0b36611d0358a623c --- /dev/null +++ b/images/Shaft_00275.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36f3949ea6f6d270cc052634f59e69df218704c3fa3aec4d66cb2a78867e2b26 +size 106023 diff --git a/images/Shaft_00276.png b/images/Shaft_00276.png new file mode 100644 index 0000000000000000000000000000000000000000..af85d7c2539638a2b9a12a24273241b90feab31c --- /dev/null +++ b/images/Shaft_00276.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13cef3344826aef1e894fd30622db701e615ac80fa08438c48f8aa74878d7496 +size 69775 diff --git a/images/Shaft_00277.png b/images/Shaft_00277.png new file mode 100644 index 0000000000000000000000000000000000000000..5646ffcf73eac0525f59df6510fecdb3c1652eff --- /dev/null +++ b/images/Shaft_00277.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff61eddeaa999afc94fd0ce872a851a22a43cf7ff3c2e43c0d5f0635ed11969a +size 98211 diff --git a/images/Shaft_00278.png b/images/Shaft_00278.png new file mode 100644 index 0000000000000000000000000000000000000000..7c35f0b86240c3a1ccca6ad7af23adc12bd37723 --- /dev/null +++ b/images/Shaft_00278.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:caf1b92f77c3b808bb694afd3e58ad6520c074faa7d066097f9cc62902a7e34d +size 83476 diff --git a/images/Shaft_00279.png b/images/Shaft_00279.png new file mode 100644 index 0000000000000000000000000000000000000000..d066ea8a66abfcb811b1bbb7d4da65ef8ae9a565 --- /dev/null +++ b/images/Shaft_00279.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64288ebe5a34d3a0a6534f3456ca266312e498f1b22abbc888aecec8cc272f8c +size 91394 diff --git a/images/Shaft_00280.png b/images/Shaft_00280.png new file mode 100644 index 0000000000000000000000000000000000000000..e1160ff9abe727b83b6b98ef95a99f306012ef66 --- /dev/null +++ b/images/Shaft_00280.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a22c285d62bc9bd37fe0e87b0f55dbffa30f59868306aa0f979be4756a4c8d0 +size 110436 diff --git a/images/Shaft_00281.png b/images/Shaft_00281.png new file mode 100644 index 0000000000000000000000000000000000000000..a64f0453109b1fb9104bc4f032c2c6e3ca301863 --- /dev/null +++ b/images/Shaft_00281.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e97eefccb33c79e5b20004afb06cf4905337b650dbf86e29d986bf81019c3f90 +size 91834 diff --git a/images/Shaft_00282.png b/images/Shaft_00282.png new file mode 100644 index 0000000000000000000000000000000000000000..ba93be2061c0c83b9300155d8a349da431c108c6 --- /dev/null +++ b/images/Shaft_00282.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6681eed4c9f3531fc658cb87d771d84681fb99a65d06c5a9e127fc6ed2f66f2e +size 88460 diff --git a/images/Shaft_00283.png b/images/Shaft_00283.png new file mode 100644 index 0000000000000000000000000000000000000000..8bb8ef2963593771209f73de347c23d7dfc4a771 --- /dev/null +++ b/images/Shaft_00283.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9415d96eeccf99f3e4106b46d97fc993d59ce41d5683e29995d20d28a38fe0af +size 84714 diff --git a/images/Shaft_00284.png b/images/Shaft_00284.png new file mode 100644 index 0000000000000000000000000000000000000000..79a7006c98100f6b716b111756147af73375ec3a --- /dev/null +++ b/images/Shaft_00284.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd45381d06ba17b83af6862d83b9152b5e93eadd997706bc6b6f75d12b9e70d2 +size 76519 diff --git a/images/Shaft_00285.png b/images/Shaft_00285.png new file mode 100644 index 0000000000000000000000000000000000000000..b0c5ebc3bc4ddb15a043cf245eddcea409bddd94 --- /dev/null +++ b/images/Shaft_00285.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b94b1150afbc326cce2f30ec62e492ce943c14eb444d128ae9c8152d36049ed +size 91607 diff --git a/images/Shaft_00286.png b/images/Shaft_00286.png new file mode 100644 index 0000000000000000000000000000000000000000..b166126fe9191ec3f64c0d59e4bc5bf1f77d9a68 --- /dev/null +++ b/images/Shaft_00286.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22292c345c61b7308bab1bec657eac4dbd536c7b8eca5ecb1042dc7df001c103 +size 71615 diff --git a/images/Shaft_00287.png b/images/Shaft_00287.png new file mode 100644 index 0000000000000000000000000000000000000000..825fca093aaf7e697fdfb0a1e22db9623dddaa53 --- /dev/null +++ b/images/Shaft_00287.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5344c8398c691359c0649e1aa620acf59a526bf3c8c9500aedc706e84bebe1eb +size 69848 diff --git a/images/Shaft_00288.png b/images/Shaft_00288.png new file mode 100644 index 0000000000000000000000000000000000000000..d9a3ebd0877d75d69e5255bbbda409a2bc80678a --- /dev/null +++ b/images/Shaft_00288.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:522a205e93346bfd1a887082b502dceab5862e8b9b13a7d6b4d82da5679fdfe0 +size 117076 diff --git a/images/Shaft_00289.png b/images/Shaft_00289.png new file mode 100644 index 0000000000000000000000000000000000000000..a1ea9a706880784e6646d54d28b584ea338c4aa1 --- /dev/null +++ b/images/Shaft_00289.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:979fd13628e0b141da8bd87318048d8272d75bb19c03981d4a90fbadf82375a4 +size 100281 diff --git a/images/Shaft_00290.png b/images/Shaft_00290.png new file mode 100644 index 0000000000000000000000000000000000000000..d083cbd2bf3206124ee6b337247d5597f7c0acce --- /dev/null +++ b/images/Shaft_00290.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ed68c8285a82205adc78f51d5764666481556b90901186ed8a824ae92cc4f2d +size 85711 diff --git a/images/Shaft_00291.png b/images/Shaft_00291.png new file mode 100644 index 0000000000000000000000000000000000000000..bdf104f18e789717cc3b70e403a3fd62a2326702 --- /dev/null +++ b/images/Shaft_00291.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a4a7e1dd85dd8de7d53612b165284956327690f5989990063bd4d5efc41ff18 +size 92130 diff --git a/images/Shaft_00292.png b/images/Shaft_00292.png new file mode 100644 index 0000000000000000000000000000000000000000..369938bda9da5e06f533585629923130e38739b6 --- /dev/null +++ b/images/Shaft_00292.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac0126deb552696626fb1d14f2e354519e9c2f9ff6bc65d5069f01f73d28f439 +size 99055 diff --git a/images/Shaft_00293.png b/images/Shaft_00293.png new file mode 100644 index 0000000000000000000000000000000000000000..628b798fcfea2174cf61e8c73462fbc05a3cb4b1 --- /dev/null +++ b/images/Shaft_00293.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe0b84100816998d6009c712e9342f10246dafd3d3b5dfe502eaa5e9e1aa67f3 +size 118966 diff --git a/images/Shaft_00294.png b/images/Shaft_00294.png new file mode 100644 index 0000000000000000000000000000000000000000..939d947836bcba60ca5a7a1aca825e950079166d --- /dev/null +++ b/images/Shaft_00294.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a278950d00c105c9f21c8d74c547b836c8e2a36aa84c81b920b9f392808b77f +size 105635 diff --git a/images/Shaft_00295.png b/images/Shaft_00295.png new file mode 100644 index 0000000000000000000000000000000000000000..30444c023cdd51b6877b1dc9973a3f5b7257f3ab --- /dev/null +++ b/images/Shaft_00295.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dc877893095bcbce5a893e7d8a492acec4d3dc04ad53b96d0096e1e7ccc21da +size 85324 diff --git a/images/Shaft_00296.png b/images/Shaft_00296.png new file mode 100644 index 0000000000000000000000000000000000000000..d53745b404edaf7bdbfdd94207e9d3c476ba7123 --- /dev/null +++ b/images/Shaft_00296.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7aaaad6935686d8f54941748f70ee9606c30c15ee8ac2f8f0f59ded15142f313 +size 72619 diff --git a/images/Shaft_00297.png b/images/Shaft_00297.png new file mode 100644 index 0000000000000000000000000000000000000000..b40c7d8d843508834f6fa633b26f2d74148bac26 --- /dev/null +++ b/images/Shaft_00297.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01d2b88a72ef15fb1109c5bf1d1037dc0d6895e68ac717e444dec081e8e83916 +size 84462 diff --git a/images/Shaft_00298.png b/images/Shaft_00298.png new file mode 100644 index 0000000000000000000000000000000000000000..cd37218699081efa56e1be220e097521a376170f --- /dev/null +++ b/images/Shaft_00298.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4640eaf37eab1a6beb81778b890ade9b20175b6497527c9124205eaa55cf35b +size 91437 diff --git a/images/Shaft_00299.png b/images/Shaft_00299.png new file mode 100644 index 0000000000000000000000000000000000000000..36bba1aa7f72edbf54791e5fd3ef060ae8869df7 --- /dev/null +++ b/images/Shaft_00299.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c7d3d12046358abe47c5aa2de2b46e963e79930df959bfd67112812fd20296b +size 96444 diff --git a/images/Shaft_00300.png b/images/Shaft_00300.png new file mode 100644 index 0000000000000000000000000000000000000000..2de8c3bbade770bf2aa95f82f9e3508555c02dbb --- /dev/null +++ b/images/Shaft_00300.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb00547559741a1343ff43883895f58f58add1103016b0da47be3f713d502dc9 +size 81059 diff --git a/images/Shaft_00301.png b/images/Shaft_00301.png new file mode 100644 index 0000000000000000000000000000000000000000..26f21f6fafca2037fb0601a18dbae8eb9733a249 --- /dev/null +++ b/images/Shaft_00301.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e1a7d7f3f28960b42d4881dc8a308a9218dc80ed899c4874e244038ae38d220 +size 83384 diff --git a/images/Shaft_00302.png b/images/Shaft_00302.png new file mode 100644 index 0000000000000000000000000000000000000000..4cb701ed38cbffc1904b4726f28fa7c796171379 --- /dev/null +++ b/images/Shaft_00302.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73de27872e60000e70848003478f02d01350c889e74d834e9b28a4b22de45b56 +size 69940 diff --git a/images/Shaft_00303.png b/images/Shaft_00303.png new file mode 100644 index 0000000000000000000000000000000000000000..3dd4d3889b7413644e323bd67c571e51613fb709 --- /dev/null +++ b/images/Shaft_00303.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3665141c5166fd253f4ba5de7bc82c942847eb35f1ead7800b2ae540c103729 +size 71950 diff --git a/images/Shaft_00304.png b/images/Shaft_00304.png new file mode 100644 index 0000000000000000000000000000000000000000..7b873f4c54b1f38c486c4102253179de16633a30 --- /dev/null +++ b/images/Shaft_00304.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdbf1e8196310ad22d4a4bbd1b030b8f61578a0cbf9b1e36660500ae84a93b89 +size 94801 diff --git a/images/Shaft_00305.png b/images/Shaft_00305.png new file mode 100644 index 0000000000000000000000000000000000000000..2ee697ef2d11fb34e2b990072888b49da3f19bf5 --- /dev/null +++ b/images/Shaft_00305.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f8cde159f36a722874bae06bf5b0ddf0b28a87d39caed23dd1badc1836a1bcd +size 76428 diff --git a/images/Shaft_00306.png b/images/Shaft_00306.png new file mode 100644 index 0000000000000000000000000000000000000000..8fa24eae2cd424ab159ef2325e56921730af1387 --- /dev/null +++ b/images/Shaft_00306.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7de2ce51ed09737bbee9200f652c5f1bac4a724542502153f3587b1734871961 +size 75057 diff --git a/images/Shaft_00307.png b/images/Shaft_00307.png new file mode 100644 index 0000000000000000000000000000000000000000..dc5365273d49f7a430dbac6a1e3c515b3fe35635 --- /dev/null +++ b/images/Shaft_00307.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01b180e141e28e5e10299b8d61470b480aa92764ecacccb733c5fdc9c3cb349d +size 114897 diff --git a/images/Shaft_00308.png b/images/Shaft_00308.png new file mode 100644 index 0000000000000000000000000000000000000000..a0e7332f2a7c93bbf30e18428ffbfb25dd5cdead --- /dev/null +++ b/images/Shaft_00308.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46df995c55747a13694e8faaf5652b184ec0dc172a7e5752701b1b7812085c3a +size 100630 diff --git a/images/Shaft_00309.png b/images/Shaft_00309.png new file mode 100644 index 0000000000000000000000000000000000000000..92717fe1efea9e75ce3c371938763d7d69b96754 --- /dev/null +++ b/images/Shaft_00309.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0acd130ea79d56213909583a82d0c6fd18b4edcd7809cdab428685fbf28f103 +size 102950 diff --git a/images/Shaft_00310.png b/images/Shaft_00310.png new file mode 100644 index 0000000000000000000000000000000000000000..fa8210af097f4082cde41f0c8c63eea812741a12 --- /dev/null +++ b/images/Shaft_00310.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:157b1267cd2eb0cab29cd2f87d396da0f367c146fa6a64a984770362e1b89385 +size 80527 diff --git a/images/Shaft_00311.png b/images/Shaft_00311.png new file mode 100644 index 0000000000000000000000000000000000000000..6ae4a7832d6e92c38e8a02e50daaddaa8b6a9db7 --- /dev/null +++ b/images/Shaft_00311.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fbc54501637701b889cb187745985e9d62687c6ee55799e8dec89c76410deed +size 73180 diff --git a/images/Shaft_00312.png b/images/Shaft_00312.png new file mode 100644 index 0000000000000000000000000000000000000000..6750204d67a88a3c265a70f18a386681a37bd771 --- /dev/null +++ b/images/Shaft_00312.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f26e6d531354bc35e9405f62fa8cad0c0de0e8f7b9b5485ac3596c5694015ea +size 75101 diff --git a/images/Shaft_00313.png b/images/Shaft_00313.png new file mode 100644 index 0000000000000000000000000000000000000000..66510a09be545cd547f782d12f6bfad490999806 --- /dev/null +++ b/images/Shaft_00313.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c9698e09ba3065674258c2fb0a65568b474d96bd60636b9cba910cac1e9a8dc +size 92329 diff --git a/images/Shaft_00314.png b/images/Shaft_00314.png new file mode 100644 index 0000000000000000000000000000000000000000..b8490c73dc7cc15e955e849a77c40ec48673dea1 --- /dev/null +++ b/images/Shaft_00314.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0694c129fbf4eba1934ca8536eb913f10f9093972f85f199dabbd1c8c4893c9 +size 67890 diff --git a/images/Shaft_00315.png b/images/Shaft_00315.png new file mode 100644 index 0000000000000000000000000000000000000000..9f04c8f292640cd6714bbd6c015b859cbb9a24f4 --- /dev/null +++ b/images/Shaft_00315.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:003deda7085d5d3692e91d73d76170470dc3159177cf885c0a865e6e58b50ac6 +size 74395 diff --git a/images/Shaft_00316.png b/images/Shaft_00316.png new file mode 100644 index 0000000000000000000000000000000000000000..e322efc568fa7f7ca42602ecba80a6f8c7f16803 --- /dev/null +++ b/images/Shaft_00316.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36f2e69df13b44a65ea0f982ad47676889d985e02299d22e229c46ff3f9fc4f2 +size 87315 diff --git a/images/Shaft_00317.png b/images/Shaft_00317.png new file mode 100644 index 0000000000000000000000000000000000000000..9d4ef2888cf05fa5c65d7952eaf43f31cf30ee3a --- /dev/null +++ b/images/Shaft_00317.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:541dd0c753b312edc7b243668c4afe6e97d98e63e2cbb4832e3b60f7132b865e +size 86933 diff --git a/images/Shaft_00318.png b/images/Shaft_00318.png new file mode 100644 index 0000000000000000000000000000000000000000..1d87cc8dea0575b0551f75e35d053b4fc0257f4b --- /dev/null +++ b/images/Shaft_00318.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ef47c94d4adebc157a706ca32398d0bfc32bf6bb712bff6e96c42b0f750f65f +size 99469 diff --git a/images/Shaft_00319.png b/images/Shaft_00319.png new file mode 100644 index 0000000000000000000000000000000000000000..7391a17eb8ac63f41ae6b3b605cdc85668013732 --- /dev/null +++ b/images/Shaft_00319.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b43a5f48f0efa34a823d829cc695fcda0d3f8da0ad5335908379d223e741216 +size 78109 diff --git a/images/Shaft_00320.png b/images/Shaft_00320.png new file mode 100644 index 0000000000000000000000000000000000000000..bb3ac04880a2f7590ab29482e26a59992592008a --- /dev/null +++ b/images/Shaft_00320.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ca8941fd2779f4fd2e011787cce31af0e356542a92ada00a3307cd476b813ab +size 103063 diff --git a/images/Shaft_00321.png b/images/Shaft_00321.png new file mode 100644 index 0000000000000000000000000000000000000000..725f10541f84279fb524313158375ac52cf593a5 --- /dev/null +++ b/images/Shaft_00321.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80911626962eeccea19c139cfab6dd66378d98f497fc31a018fd02b57f5a7caa +size 92377 diff --git a/images/Shaft_00322.png b/images/Shaft_00322.png new file mode 100644 index 0000000000000000000000000000000000000000..2342914acc6692044c537a79e780f236497140e5 --- /dev/null +++ b/images/Shaft_00322.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f311d35618d0d5b5d8799cd08610129f937378d16dab87d91172a612763a0d22 +size 95575 diff --git a/images/Shaft_00323.png b/images/Shaft_00323.png new file mode 100644 index 0000000000000000000000000000000000000000..54cb5930f6022794dd8cbbf7d950bc7016885b14 --- /dev/null +++ b/images/Shaft_00323.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6435d003cea514564953467373af5f6c7aad39ba7af8c386033f24826430320 +size 85355 diff --git a/images/Shaft_00324.png b/images/Shaft_00324.png new file mode 100644 index 0000000000000000000000000000000000000000..b0b867c5cc78e4d805e4d7b3c84a0e4626effe80 --- /dev/null +++ b/images/Shaft_00324.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0522b1af86c262f13ea58310094886d5030ec1552880cc0dff8848edad5f5868 +size 93414 diff --git a/images/Shaft_00325.png b/images/Shaft_00325.png new file mode 100644 index 0000000000000000000000000000000000000000..7bd5297fb73ce8f058fdd87faaefad5596755b41 --- /dev/null +++ b/images/Shaft_00325.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50ae88ee187b186d3cac83aca0a191c5e8ab4dfcd3f8a7add49817c16d286fa3 +size 71295 diff --git a/images/Shaft_00326.png b/images/Shaft_00326.png new file mode 100644 index 0000000000000000000000000000000000000000..4bea0d148f42d9f0f79ece2328351472a8163384 --- /dev/null +++ b/images/Shaft_00326.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5393e7e279fc4add9de05ecf7623b20544e8dea0eff9493f0ed45a9552accc24 +size 104416 diff --git a/images/Shaft_00327.png b/images/Shaft_00327.png new file mode 100644 index 0000000000000000000000000000000000000000..64e28f56526486f6807d0ef5081425c67a2c53ec --- /dev/null +++ b/images/Shaft_00327.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72ccab7d16542a9dc3147429f7dd9b8f288c56c3decd18e08f829988578c66f4 +size 85520 diff --git a/images/Shaft_00328.png b/images/Shaft_00328.png new file mode 100644 index 0000000000000000000000000000000000000000..294914f5772dc84183b03e350b9468f4a555aa3b --- /dev/null +++ b/images/Shaft_00328.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c980727681e9e497b058871b375cce8ccfaabc82d1c5477af8548d0cf1a38fda +size 100129 diff --git a/images/Shaft_00329.png b/images/Shaft_00329.png new file mode 100644 index 0000000000000000000000000000000000000000..2dfe6f19a05d29a325edf6381d0bdb7d384fd222 --- /dev/null +++ b/images/Shaft_00329.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7886a45015cfb0e6ceb8d42a13fce09c290f05427aca83f8952c6ab6cccd885d +size 77240 diff --git a/images/Shaft_00330.png b/images/Shaft_00330.png new file mode 100644 index 0000000000000000000000000000000000000000..d929f9ff55134555dc436f3e794670afa33c5092 --- /dev/null +++ b/images/Shaft_00330.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:615d6191b7699b48c4d6d9da0ae72cd14913d3bac813093950438350c01e84e3 +size 79291 diff --git a/images/Shaft_00331.png b/images/Shaft_00331.png new file mode 100644 index 0000000000000000000000000000000000000000..16becb84e90ec58a8712cb258754d9967468e085 --- /dev/null +++ b/images/Shaft_00331.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c813dc35c3894b98ed636639fb4af6d4be4f9dcb0f81942f490c5fed319a2544 +size 71971 diff --git a/images/Shaft_00332.png b/images/Shaft_00332.png new file mode 100644 index 0000000000000000000000000000000000000000..d0688e3c259fd55f5260293539b1064fe9be4ae3 --- /dev/null +++ b/images/Shaft_00332.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b4238e0c051cdfc4cf4b83581e0255e20417ae4ff8cd4ff6237761134f98d96 +size 89072 diff --git a/images/Shaft_00333.png b/images/Shaft_00333.png new file mode 100644 index 0000000000000000000000000000000000000000..b588c35b9425fd1638b6a305c5a12981640475d0 --- /dev/null +++ b/images/Shaft_00333.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c4b98b5b5b258631e1c3cbf8f3696722e3ffff2f3b96c0c5be0f389987ca374 +size 92957 diff --git a/images/Shaft_00334.png b/images/Shaft_00334.png new file mode 100644 index 0000000000000000000000000000000000000000..35fe03c9f752aceb36e5ece0a555d46968ea83cb --- /dev/null +++ b/images/Shaft_00334.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be11fd0733b3887739b12cc44ceba8f882b6966a2a2c1e101ba44e31b37ddbe6 +size 74824 diff --git a/images/Shaft_00335.png b/images/Shaft_00335.png new file mode 100644 index 0000000000000000000000000000000000000000..f4c2560823845c2ad8e173c7021571011918d2dd --- /dev/null +++ b/images/Shaft_00335.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c215bc242d8e3a004d48c8648947155c2facd1d0bfeb3fd66cce7dd06874962c +size 107370 diff --git a/images/Shaft_00336.png b/images/Shaft_00336.png new file mode 100644 index 0000000000000000000000000000000000000000..51fff7544f5b0013e23298515fa23dd35091ce0a --- /dev/null +++ b/images/Shaft_00336.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:978759dbca9bc775b7399d1659a8f9b9688f5e85b3dcfcf50898f3d5730c6b10 +size 77666 diff --git a/images/Shaft_00337.png b/images/Shaft_00337.png new file mode 100644 index 0000000000000000000000000000000000000000..3d28e8ebc76a45d5cdabd10d364796e5457ebfe8 --- /dev/null +++ b/images/Shaft_00337.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d25cafe004d803ad1f7f683b6e56eb14bb8d15f1f07c29283db4c6166dfd0830 +size 76776 diff --git a/images/Shaft_00338.png b/images/Shaft_00338.png new file mode 100644 index 0000000000000000000000000000000000000000..6a0fce848e577e885ec0b9fe1e44ec0af8ce9a40 --- /dev/null +++ b/images/Shaft_00338.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c44ee269a911876d7e8eaa0cbe07964690dd85f21866d4cddf41d97ecf4c4a39 +size 84027 diff --git a/images/Shaft_00339.png b/images/Shaft_00339.png new file mode 100644 index 0000000000000000000000000000000000000000..710c1bd8fd0d8ae3146a16c6db28514c737a25dd --- /dev/null +++ b/images/Shaft_00339.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9558f5c1a1be59a10c385cc0d1f002fb53189afa8de24df2e27f1b4d474198d +size 77212 diff --git a/images/Shaft_00340.png b/images/Shaft_00340.png new file mode 100644 index 0000000000000000000000000000000000000000..e8e77418e06ddeb730702a19bc745c8ef7fe192c --- /dev/null +++ b/images/Shaft_00340.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc27cca23247d29b4b65e3dd3698c66ddace3bbbce936cc8c37b8b83fc11e66e +size 89435 diff --git a/images/Shaft_00341.png b/images/Shaft_00341.png new file mode 100644 index 0000000000000000000000000000000000000000..49e84dc3eb4547d07e51c9798651430e25b13c9d --- /dev/null +++ b/images/Shaft_00341.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66615c081e8b97b447235080db9af97bcf6e1b706b6075e1ef11087f6f39651f +size 77121 diff --git a/images/Shaft_00342.png b/images/Shaft_00342.png new file mode 100644 index 0000000000000000000000000000000000000000..c3630e566779fe44e104f509e7d980bf503531c5 --- /dev/null +++ b/images/Shaft_00342.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be951954070df5e955776708d724fd15bee1fe8c4f67998e8753636ff28a8be2 +size 103421 diff --git a/images/Shaft_00343.png b/images/Shaft_00343.png new file mode 100644 index 0000000000000000000000000000000000000000..2be8640ed473085db7627e97a89f40ab650ceace --- /dev/null +++ b/images/Shaft_00343.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06c24a0e11a568d58128c269d37059b8201dfdebc8c460731903198fcc5d8f53 +size 82419 diff --git a/images/Shaft_00344.png b/images/Shaft_00344.png new file mode 100644 index 0000000000000000000000000000000000000000..f60d397a4e5d5aa5c6a4edffd1fe697ddd1c6fc0 --- /dev/null +++ b/images/Shaft_00344.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83d96e237dee509317913f143cd0d4a9b5f1ddb8ea78349583feb969eee3d6ae +size 89341 diff --git a/images/Shaft_00345.png b/images/Shaft_00345.png new file mode 100644 index 0000000000000000000000000000000000000000..a4cfa18f076de8b953cadda94732f6ddbecb76d7 --- /dev/null +++ b/images/Shaft_00345.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47c7234dda11a40a7531b9620f549476d590351ac45fcae9f4f80c5bcce94ee8 +size 82313 diff --git a/images/Shaft_00346.png b/images/Shaft_00346.png new file mode 100644 index 0000000000000000000000000000000000000000..0f372ad1934ee98de4d804d4c9aa0fc5539eba1e --- /dev/null +++ b/images/Shaft_00346.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:345b77265c360208ef980c5f7e2153c534ab7b89a0e87ae5041501b4336da0b8 +size 83017 diff --git a/images/Shaft_00347.png b/images/Shaft_00347.png new file mode 100644 index 0000000000000000000000000000000000000000..28fa7fd16a81ad5064288031603676af9c1af5d8 --- /dev/null +++ b/images/Shaft_00347.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c86a1e10430abdd04a4be55ac74ae3dd406f2202fa03b48b3b2145d130347e3 +size 90541 diff --git a/images/Shaft_00348.png b/images/Shaft_00348.png new file mode 100644 index 0000000000000000000000000000000000000000..671067681e47446d737b532ea678e410a9b221a7 --- /dev/null +++ b/images/Shaft_00348.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd76094e51a3491c7d2aa2b352dfdd2b2c8a37fb659161b9cef3a35be3401b6f +size 98685 diff --git a/images/Shaft_00349.png b/images/Shaft_00349.png new file mode 100644 index 0000000000000000000000000000000000000000..baf37de3b7b31234b587e3234742eb4198bd035c --- /dev/null +++ b/images/Shaft_00349.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6913b013dcac3ad4644dbfc2ae7bfe5b62f6bd8f89a438ac46512a7d38adb706 +size 110920 diff --git a/images/Shaft_00350.png b/images/Shaft_00350.png new file mode 100644 index 0000000000000000000000000000000000000000..0022c6e4dfa2ca0e483aee6df35e86a10fd45a93 --- /dev/null +++ b/images/Shaft_00350.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3566a6ee844f8a38c70d1ac5b12dc98a3f0b87ed1bda7b8b6b24981f746c6c76 +size 86939 diff --git a/images/Shaft_00351.png b/images/Shaft_00351.png new file mode 100644 index 0000000000000000000000000000000000000000..eb0647ec0c84b8884a35287aaaafe8fbb4288eae --- /dev/null +++ b/images/Shaft_00351.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4338d1db5bfbe2f88401b058271cd70b94fd74b7e1070c5542d6aadfdc8f397f +size 72585 diff --git a/images/Shaft_00352.png b/images/Shaft_00352.png new file mode 100644 index 0000000000000000000000000000000000000000..1561ff821c1edf9c644ac2943c1393e8fdd77f47 --- /dev/null +++ b/images/Shaft_00352.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:702395eccf539857025cd6ba864528dbf8143aff66744cd33841ee53959868d1 +size 88888 diff --git a/images/Shaft_00353.png b/images/Shaft_00353.png new file mode 100644 index 0000000000000000000000000000000000000000..66ae7f7525d4de6921fecadc69f9cd3790978145 --- /dev/null +++ b/images/Shaft_00353.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2b2f7e54a9bf0c1cb3b1a0cf3919b4ce923dc3855068aecdb068fb25307b8a2 +size 80401 diff --git a/images/Shaft_00354.png b/images/Shaft_00354.png new file mode 100644 index 0000000000000000000000000000000000000000..b96e320eea67964b8df80ba3403217d9e918fc86 --- /dev/null +++ b/images/Shaft_00354.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa07238071fa94cf4ca3f1406a30617f174532b6b2c17cac3013d97a519399aa +size 69834 diff --git a/images/Shaft_00355.png b/images/Shaft_00355.png new file mode 100644 index 0000000000000000000000000000000000000000..744f25c55d49cd1bb790a3b72ce290697b8ad9c6 --- /dev/null +++ b/images/Shaft_00355.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a401aaf2fc0d34338d15d4ee08cef0971c90f47c4acf59568d971e5883d4349 +size 120763 diff --git a/images/Shaft_00356.png b/images/Shaft_00356.png new file mode 100644 index 0000000000000000000000000000000000000000..700fdf316a34b54611dff2a6026a8fb58b0e09df --- /dev/null +++ b/images/Shaft_00356.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89db367a883df91ae6dd01104d7e9e1b98db6fea909315e1222a8f96bfd6ab61 +size 109252 diff --git a/images/Shaft_00357.png b/images/Shaft_00357.png new file mode 100644 index 0000000000000000000000000000000000000000..cd5067aed77ed7fca6aec52dc7d44ca6535a34e9 --- /dev/null +++ b/images/Shaft_00357.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddd8fceb79de992d209cdcef5f35f44875fa7ee8417eaa23188bc783832b9377 +size 86140 diff --git a/images/Shaft_00358.png b/images/Shaft_00358.png new file mode 100644 index 0000000000000000000000000000000000000000..d0678451a892cc19b66c1518053d5fbc97b5a033 --- /dev/null +++ b/images/Shaft_00358.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20cdeaa75e9d10dc3610bf0999e3a9e94c2860a0dfcb54295b9984e3681be2e7 +size 111232 diff --git a/images/Shaft_00359.png b/images/Shaft_00359.png new file mode 100644 index 0000000000000000000000000000000000000000..d6e737e9685c57ca6a8c96800cc27fff88a4b89d --- /dev/null +++ b/images/Shaft_00359.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce8a2e6e5c643e57fd49fe03db22e97f341dc97f2aba6e7b0765e9c77bb42ace +size 82090 diff --git a/images/Shaft_00360.png b/images/Shaft_00360.png new file mode 100644 index 0000000000000000000000000000000000000000..a280044fcb3280742b558e645a4acc8b8ff60f94 --- /dev/null +++ b/images/Shaft_00360.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c1bd802d32c85aa7e84528dfca599a3f211204130064bbe2793827c5d9d6f32 +size 71462 diff --git a/images/Shaft_00361.png b/images/Shaft_00361.png new file mode 100644 index 0000000000000000000000000000000000000000..742b27f780385dc55069d2a6b3ddcf98d265d291 --- /dev/null +++ b/images/Shaft_00361.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2db3af4d2870330772606cd16391d517acd95aca10c42f23e843b90e55db7bc +size 95036 diff --git a/images/Shaft_00362.png b/images/Shaft_00362.png new file mode 100644 index 0000000000000000000000000000000000000000..51886f7ccf60ed5df347b2188892a1eaef0e330a --- /dev/null +++ b/images/Shaft_00362.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dd414ccb693dac03812a9028f963592925ba5d1b7dca8f7bf100cec952fb927 +size 81658 diff --git a/images/Shaft_00363.png b/images/Shaft_00363.png new file mode 100644 index 0000000000000000000000000000000000000000..f47c31ed61ce14388a2ad868d74096ac29bfde09 --- /dev/null +++ b/images/Shaft_00363.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77b4be865a96badd2a7a32d4da406ca0afd20741ae973deadec58f9f5775e876 +size 90617 diff --git a/images/Shaft_00364.png b/images/Shaft_00364.png new file mode 100644 index 0000000000000000000000000000000000000000..7192d1247b47b13446349365e8a59b84adf478ec --- /dev/null +++ b/images/Shaft_00364.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:231ff5c2778ec6d980d5eb135777f5d0350759c3b932255bd119278ab698fd72 +size 75573 diff --git a/images/Shaft_00365.png b/images/Shaft_00365.png new file mode 100644 index 0000000000000000000000000000000000000000..decbbebcacc3a142bea44d1c0a08daa6b5e8b0b7 --- /dev/null +++ b/images/Shaft_00365.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:473ab647e55542c64024b58a771aca6287fb686e5f6a69a42685a13ca7606302 +size 87347 diff --git a/images/Shaft_00366.png b/images/Shaft_00366.png new file mode 100644 index 0000000000000000000000000000000000000000..ed22038a1d8dedea3e8d9ff9af8a0ea38ea61380 --- /dev/null +++ b/images/Shaft_00366.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8334250a46cf378a1bb87e054750ab8e6e37e124c32ef93114ef05e1d1759b4c +size 94232 diff --git a/images/Shaft_00367.png b/images/Shaft_00367.png new file mode 100644 index 0000000000000000000000000000000000000000..d98d416481b1a8a4ae6afcf9580f8508463b6494 --- /dev/null +++ b/images/Shaft_00367.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d407bdbd06a39c30db54de2369e94aef647da9f6d78918b3aff150f5b61a903d +size 91060 diff --git a/images/Shaft_00368.png b/images/Shaft_00368.png new file mode 100644 index 0000000000000000000000000000000000000000..630f7195e79ed1c3ef842fbd812453f513ed8b16 --- /dev/null +++ b/images/Shaft_00368.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13b0f3df8155483237e6152071282e143238f462538c017dd8a5e60e187e9dce +size 95057 diff --git a/images/Shaft_00369.png b/images/Shaft_00369.png new file mode 100644 index 0000000000000000000000000000000000000000..132f70a396f3dd1d94b2259a236e9ea0b287973c --- /dev/null +++ b/images/Shaft_00369.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef31061390e4d4c3911b0efbffd742191fb69a6b1eeb5a0ca3cc41b9ab447ac6 +size 90626 diff --git a/images/Shaft_00370.png b/images/Shaft_00370.png new file mode 100644 index 0000000000000000000000000000000000000000..c9581b20cc012803d88230fdddc73202c63a9b09 --- /dev/null +++ b/images/Shaft_00370.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bce899bdff69da69c9f1b00c969085ad748e6bceaed5acf785c22ff9e47b364 +size 110577 diff --git a/images/Shaft_00371.png b/images/Shaft_00371.png new file mode 100644 index 0000000000000000000000000000000000000000..37697fccb11f2da6632e6ff581c5845367d5c1d2 --- /dev/null +++ b/images/Shaft_00371.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f452d207a307d154000aa516cef638811aa8b783527731f2359ce2b93fc16762 +size 88804 diff --git a/images/Shaft_00372.png b/images/Shaft_00372.png new file mode 100644 index 0000000000000000000000000000000000000000..be75a1ea96835a6964942933ef4e3f4d15de310c --- /dev/null +++ b/images/Shaft_00372.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54b4c24cd9f7c7dc876015e8bb301b6fe0e96b7bdc624a24a6243427347125ee +size 78264 diff --git a/images/Shaft_00373.png b/images/Shaft_00373.png new file mode 100644 index 0000000000000000000000000000000000000000..b45c13a22780e2c94a45abf8ba023f5624658a34 --- /dev/null +++ b/images/Shaft_00373.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a693c41cadb812bcfac92c62a3d49ef76214a9f308c730935d79ab893d4bd263 +size 84586 diff --git a/images/Shaft_00374.png b/images/Shaft_00374.png new file mode 100644 index 0000000000000000000000000000000000000000..4bff3a25556cd8704e27fc0e877aeb7f6c64b6c5 --- /dev/null +++ b/images/Shaft_00374.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dba38fd06ce922ff69be7a04e0003a261383011d260ee085bead832c667869e1 +size 83987 diff --git a/images/Shaft_00375.png b/images/Shaft_00375.png new file mode 100644 index 0000000000000000000000000000000000000000..fc82a54ab4d6df8a383875fb393e017476a0d135 --- /dev/null +++ b/images/Shaft_00375.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81251bfb171d6b3d64a78edca829a324e4c8046d9e3913ae3c86272c31009604 +size 73659 diff --git a/images/Shaft_00376.png b/images/Shaft_00376.png new file mode 100644 index 0000000000000000000000000000000000000000..401a979e08441744a36f536a48aaebfbeeac3736 --- /dev/null +++ b/images/Shaft_00376.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:314fc825001ae3e98a9b850b5b73dedd53f8dfab7d88a7c93960d262773a0cdb +size 73676 diff --git a/images/Shaft_00377.png b/images/Shaft_00377.png new file mode 100644 index 0000000000000000000000000000000000000000..a62ead3275622718bd1960c56a96c0ee0f7bea9c --- /dev/null +++ b/images/Shaft_00377.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c4d1908bcaf63e8083b912aa34e01e1b13c687e3e03d89abd4287ec943df904 +size 72466 diff --git a/images/Shaft_00378.png b/images/Shaft_00378.png new file mode 100644 index 0000000000000000000000000000000000000000..78002de78bb3ec2c1fb5db7706b297fb1fa8f766 --- /dev/null +++ b/images/Shaft_00378.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35e2b3dae20f8c7a6da987b675185fbcab9c837c0cd888a623014e47cf12aee7 +size 89502 diff --git a/images/Shaft_00379.png b/images/Shaft_00379.png new file mode 100644 index 0000000000000000000000000000000000000000..56cc0a885fadaeaa1fcbc4e338a835336d766dd0 --- /dev/null +++ b/images/Shaft_00379.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:030e1b2431fb19196dba84ba112b8d02f7964baaca00b016030e695f6e214730 +size 89939 diff --git a/images/Shaft_00380.png b/images/Shaft_00380.png new file mode 100644 index 0000000000000000000000000000000000000000..bc11608f3b28320d89be980944de95f6e1bdc662 --- /dev/null +++ b/images/Shaft_00380.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4110030f2bcede681b18b1c433c2d9bf6910f937f5dd1a6dd89c5dc01c5c9994 +size 85338 diff --git a/images/Shaft_00381.png b/images/Shaft_00381.png new file mode 100644 index 0000000000000000000000000000000000000000..947a125da6952788ee654c6d6be0e5336261d71b --- /dev/null +++ b/images/Shaft_00381.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b03f7d60e1f5e9fce3b2a3f41b94e50960c0125a1adcdd85eebacfa89083b21 +size 80928 diff --git a/images/Shaft_00382.png b/images/Shaft_00382.png new file mode 100644 index 0000000000000000000000000000000000000000..2cc76798764289cb310cdf46f7e1c52bc2098032 --- /dev/null +++ b/images/Shaft_00382.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b480dba54a8bd6711163251090951f7bf48ed59ec7df988eee3e48d6808f8189 +size 81432 diff --git a/images/Shaft_00383.png b/images/Shaft_00383.png new file mode 100644 index 0000000000000000000000000000000000000000..fc81a275e484fb51413c2ad665dbba29825ef9e1 --- /dev/null +++ b/images/Shaft_00383.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc60db12cd3dead4a8eeb5d17ec47b41f7179e555405bc620838ef07d84b61d9 +size 78112 diff --git a/images/Shaft_00384.png b/images/Shaft_00384.png new file mode 100644 index 0000000000000000000000000000000000000000..75251a15c0b82db15f3f97796d8d831610ce3074 --- /dev/null +++ b/images/Shaft_00384.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:565627c5c5328ec7937b40901e1c8dca645606800f4ee84c96292c27331d3d57 +size 82858 diff --git a/images/Shaft_00385.png b/images/Shaft_00385.png new file mode 100644 index 0000000000000000000000000000000000000000..6685f00de420c101e33e7d4457089477f984564d --- /dev/null +++ b/images/Shaft_00385.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc060b93740d9fa0f72013b460f633abc670ddfcb0a0f90c6429501498440917 +size 104466 diff --git a/images/Shaft_00386.png b/images/Shaft_00386.png new file mode 100644 index 0000000000000000000000000000000000000000..2d41ff81614e8a077df977dad0ef302b5669bf84 --- /dev/null +++ b/images/Shaft_00386.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce387eda12b71b5374b70ff2df82fd23af1e62902071967bba89566e9697fbc7 +size 88477 diff --git a/images/Shaft_00387.png b/images/Shaft_00387.png new file mode 100644 index 0000000000000000000000000000000000000000..4896e2c7a7ffc049fcf938439b790c1820c92d6b --- /dev/null +++ b/images/Shaft_00387.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c83bf1e2a5a1daf3c122f72d0f5a9057efff86ba57d551f948acad23f503757b +size 104776 diff --git a/images/Shaft_00388.png b/images/Shaft_00388.png new file mode 100644 index 0000000000000000000000000000000000000000..9b7a02a5224d7e5a9614825f4dabc24c4ea72cce --- /dev/null +++ b/images/Shaft_00388.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2d79e37d3a1fb68b71ba4e5d34b8ca37604c874308883081ad00610c46a10e0 +size 88476 diff --git a/images/Shaft_00389.png b/images/Shaft_00389.png new file mode 100644 index 0000000000000000000000000000000000000000..1dc0e9b2c337c700317bdd0eb1d408396ad4bf45 --- /dev/null +++ b/images/Shaft_00389.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e86d55300ef59ff5e37ab8ac179f0f917e8dd65b8a3979ab19f6c67be130dcd +size 104066 diff --git a/images/Shaft_00390.png b/images/Shaft_00390.png new file mode 100644 index 0000000000000000000000000000000000000000..41cc489412ae02074d7eb90a28b3eb9240d307ba --- /dev/null +++ b/images/Shaft_00390.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:325b19eda66f859efc3a4e2f99b349eb810b738c0c2c2c0d31636101f5c74b61 +size 93743 diff --git a/images/Shaft_00391.png b/images/Shaft_00391.png new file mode 100644 index 0000000000000000000000000000000000000000..186211abc29b721b60c91945903ce8b9dce4cf2d --- /dev/null +++ b/images/Shaft_00391.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49c041651f1ca9b530390b2643aa4f553a953b04613a5f3960f94655eea1495e +size 70891 diff --git a/images/Shaft_00392.png b/images/Shaft_00392.png new file mode 100644 index 0000000000000000000000000000000000000000..3f3efa6caa063e9afab533ec092f30ff56cef6ec --- /dev/null +++ b/images/Shaft_00392.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:391f36382e6d6f758c7eb677bb747a97850aae5563d1068de1bca03aad1bb0b3 +size 85716 diff --git a/images/Shaft_00393.png b/images/Shaft_00393.png new file mode 100644 index 0000000000000000000000000000000000000000..4ea0293a091f935367afe7d424cebfce7f6120f2 --- /dev/null +++ b/images/Shaft_00393.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9f4726b1b4590d7b9a56f4ea4d2deb2e872a215704c5a4fae501a32a9b6dc2c +size 98867 diff --git a/images/Shaft_00394.png b/images/Shaft_00394.png new file mode 100644 index 0000000000000000000000000000000000000000..0c320bc2653c5a90a697e647dfb8abbeb8b86af4 --- /dev/null +++ b/images/Shaft_00394.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6cde8317b5ae63baa2ff8e5ff5dddcd5ea6fecc9aac2bbe17202763bd2a6d7a +size 80609 diff --git a/images/Shaft_00395.png b/images/Shaft_00395.png new file mode 100644 index 0000000000000000000000000000000000000000..0eae341748cdf9fd2b4d1a8a6e8c67ae47485441 --- /dev/null +++ b/images/Shaft_00395.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70d37d5b968094ece3d0c92239b22dbd9cd840be876bc555caea8c21890f948e +size 97789 diff --git a/images/Shaft_00396.png b/images/Shaft_00396.png new file mode 100644 index 0000000000000000000000000000000000000000..5a3172833e98c21b6e4667f6540e704947a23da8 --- /dev/null +++ b/images/Shaft_00396.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1971e2d8285bf27197b95ac0cd332ecd20ff702eaeb269a9170d9a06194cbf9d +size 71849 diff --git a/images/Shaft_00397.png b/images/Shaft_00397.png new file mode 100644 index 0000000000000000000000000000000000000000..f8e1f4bf3e6b09be72bf60aa9c22dc4ca7212941 --- /dev/null +++ b/images/Shaft_00397.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a876248548b98db8fecec8c11e2486fe32a0a98656e1f10e8767e343c872355 +size 86193 diff --git a/images/Shaft_00398.png b/images/Shaft_00398.png new file mode 100644 index 0000000000000000000000000000000000000000..c0089c9aeea8edeab46b08c9e2a82799d2e1dd2e --- /dev/null +++ b/images/Shaft_00398.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56cfd67c92f041383c1e65d4f41683f12d474a5b7b4eaf647ec5fda291dc4668 +size 104815 diff --git a/images/Shaft_00399.png b/images/Shaft_00399.png new file mode 100644 index 0000000000000000000000000000000000000000..3e48b0b7c16731173cebcf188e2323c084074783 --- /dev/null +++ b/images/Shaft_00399.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1114e072c171d8085c3b4d10ebbc24125f9b098ed02a532d96caa7057fe38c7 +size 92627 diff --git a/images/Shaft_00400.png b/images/Shaft_00400.png new file mode 100644 index 0000000000000000000000000000000000000000..040e475395b59d0a7dd3c333b1f6504f06f58858 --- /dev/null +++ b/images/Shaft_00400.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18f54960e2cc3a80a106406c2f70692aa1688e6184d3e538c17919a6248f1e34 +size 74464 diff --git a/images/Shaft_00401.png b/images/Shaft_00401.png new file mode 100644 index 0000000000000000000000000000000000000000..f4cb4f7f006a50dbc150529177b1958f7007f456 --- /dev/null +++ b/images/Shaft_00401.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:feccd6ed172a3941670d09ac39f61e69e6d0bcff5d060440a5e069dfc303e4cf +size 113974 diff --git a/images/Shaft_00402.png b/images/Shaft_00402.png new file mode 100644 index 0000000000000000000000000000000000000000..765412e4224e2cf306ace88bc80e21bfe38fd0dc --- /dev/null +++ b/images/Shaft_00402.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60b52e538ff852d3327ee8ee8e167cff6ca378633e4078ca43d012c18e8f8f29 +size 97252 diff --git a/images/Shaft_00403.png b/images/Shaft_00403.png new file mode 100644 index 0000000000000000000000000000000000000000..861a508c948764c942cb2550aacc37ccfc18f54f --- /dev/null +++ b/images/Shaft_00403.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e88bfca2a760afdc414637839d53b6a621e9c7bb36cc1cb326c72985ce0b7687 +size 113292 diff --git a/images/Shaft_00404.png b/images/Shaft_00404.png new file mode 100644 index 0000000000000000000000000000000000000000..85f4306d1e11aa3aa6997b54d4eaa185b806c16d --- /dev/null +++ b/images/Shaft_00404.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c3f38e55f464c7a725892851d18255b7de0ac971d7831680998f4789ef30205 +size 67694 diff --git a/images/Shaft_00405.png b/images/Shaft_00405.png new file mode 100644 index 0000000000000000000000000000000000000000..dd8ade6130c1cbe7658e3e53cd17ab2827db02a0 --- /dev/null +++ b/images/Shaft_00405.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:248695f51c79c3a59b3969c10558043dd37ea232291da430e7ba4cdbde269726 +size 73687 diff --git a/images/Shaft_00406.png b/images/Shaft_00406.png new file mode 100644 index 0000000000000000000000000000000000000000..7e2e4f908276ab6518d642b3e4cc90f0572d35ea --- /dev/null +++ b/images/Shaft_00406.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aef7d6e07a93bddf995678a86a5b52145222d38b0163100f2deeb7853b894305 +size 96021 diff --git a/images/Shaft_00407.png b/images/Shaft_00407.png new file mode 100644 index 0000000000000000000000000000000000000000..3b261f4a8a6e2ed61abcfc8ab51c87fe775aab3e --- /dev/null +++ b/images/Shaft_00407.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a1f92d4cc372f3c3cb7a1cfb62c6d0ddc4b25ee1620dee98d70d121210894a9 +size 80917 diff --git a/images/Shaft_00408.png b/images/Shaft_00408.png new file mode 100644 index 0000000000000000000000000000000000000000..2950dac500a0a65f2010e28be85176982bede7cb --- /dev/null +++ b/images/Shaft_00408.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f476672000445ef0473b281de68b918c63aeafa1b006272d471f2b54f19293db +size 83255 diff --git a/images/Shaft_00409.png b/images/Shaft_00409.png new file mode 100644 index 0000000000000000000000000000000000000000..2da455abf63fec25303ef2b98821e33a89995891 --- /dev/null +++ b/images/Shaft_00409.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c99bb9363d41a0e222fee1a3367b60577c2370180f58ef10eef8b7f9e6eebc9f +size 82316 diff --git a/images/Shaft_00410.png b/images/Shaft_00410.png new file mode 100644 index 0000000000000000000000000000000000000000..1d85a6d9d451d0246d31f995fc947b96337f5140 --- /dev/null +++ b/images/Shaft_00410.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56fb11604e9d385e1bf6c4720536586d78396cc23bfbfbcf1b41bab529547872 +size 73425 diff --git a/images/Shaft_00411.png b/images/Shaft_00411.png new file mode 100644 index 0000000000000000000000000000000000000000..ad5d08f9dda6f507cba226ef797296cdb1dd6632 --- /dev/null +++ b/images/Shaft_00411.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69d3299632ba60b395d6d8ef9c24bec006f8cca6fbc96085d792e5c64bb54eb7 +size 98689 diff --git a/images/Shaft_00412.png b/images/Shaft_00412.png new file mode 100644 index 0000000000000000000000000000000000000000..da95f1b89250fe9b4b391b72ec41533ee9fd5c22 --- /dev/null +++ b/images/Shaft_00412.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:019636ccdd96538343f866c38a31b72c12295823bd4db197c7f5b3c98801b952 +size 106929 diff --git a/images/Shaft_00413.png b/images/Shaft_00413.png new file mode 100644 index 0000000000000000000000000000000000000000..134875f6c92b4bf21180f5b148f70a356531a0bb --- /dev/null +++ b/images/Shaft_00413.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49527c9c42c20b5303c328631e49816f3264f5f7981659e83bc04051677f92f9 +size 90809 diff --git a/images/Shaft_00414.png b/images/Shaft_00414.png new file mode 100644 index 0000000000000000000000000000000000000000..36694faef2b5c224d19e3623b68e280ef10cd896 --- /dev/null +++ b/images/Shaft_00414.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9006f6fba7575f3d89ed7683b721a41a4ca99f5adfc94e9c08fe6c6da3722f3d +size 94595 diff --git a/images/Shaft_00415.png b/images/Shaft_00415.png new file mode 100644 index 0000000000000000000000000000000000000000..ab5fb73a7d1f5c821cf6ad6d6185396f0ebbeb80 --- /dev/null +++ b/images/Shaft_00415.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd87d35b71c6c82f092d5d9efaea1caa7ccb557ecf5d8bcacd5b0c3034e65122 +size 78521 diff --git a/images/Shaft_00416.png b/images/Shaft_00416.png new file mode 100644 index 0000000000000000000000000000000000000000..26c35efcf62e0406d3a54e550531c74476515838 --- /dev/null +++ b/images/Shaft_00416.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e75eb7d05aaf61248885380c1db90b16d0d69b6caef5544e5fd7fc54cf306d3c +size 76181 diff --git a/images/Shaft_00417.png b/images/Shaft_00417.png new file mode 100644 index 0000000000000000000000000000000000000000..1be8d6ea9d8739a52481cb2ffe2c622103c229ca --- /dev/null +++ b/images/Shaft_00417.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ab46cac9f376d136ce6f459342ad20f45ba4386aa7b1e5a77b319d9fe331f1a +size 69738 diff --git a/images/Shaft_00418.png b/images/Shaft_00418.png new file mode 100644 index 0000000000000000000000000000000000000000..c84de8c928a2681f00e3684a25dc98761c931c70 --- /dev/null +++ b/images/Shaft_00418.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d28b9a7da32ab965705e0259abe83bdf81df14c61ae38c288e2cdd8dffec07b6 +size 80460 diff --git a/images/Shaft_00419.png b/images/Shaft_00419.png new file mode 100644 index 0000000000000000000000000000000000000000..b59829a37218b08c4cf1788357c09d23dbaa5ce4 --- /dev/null +++ b/images/Shaft_00419.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f8e94325c0f5207674d0c87596b64a74afe36f7c8c53501a738aedc973ec479 +size 98575 diff --git a/images/Shaft_00420.png b/images/Shaft_00420.png new file mode 100644 index 0000000000000000000000000000000000000000..a20495eed589a17342ef7be24bf8747bb33f08e0 --- /dev/null +++ b/images/Shaft_00420.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba142897ea62f1682fc66ffd4afc87758875250d23bdcbf4b6190bb7ef0d04f5 +size 89165 diff --git a/images/Shaft_00421.png b/images/Shaft_00421.png new file mode 100644 index 0000000000000000000000000000000000000000..98843b6ebae97ecf3c2d5b535ea405afd26e2ea9 --- /dev/null +++ b/images/Shaft_00421.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3b0489557f8e1686bc8ee1f12a432d7144c414e764a184a0d05361f0bc26cf2 +size 69061 diff --git a/images/Shaft_00422.png b/images/Shaft_00422.png new file mode 100644 index 0000000000000000000000000000000000000000..9a34c1de0945673dbf9c6adb38afbf263c58a72f --- /dev/null +++ b/images/Shaft_00422.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8d21fdd0191629a836d5ab84992f0459e1fb6445f6672b42740ba3cb39115e3 +size 91633 diff --git a/images/Shaft_00423.png b/images/Shaft_00423.png new file mode 100644 index 0000000000000000000000000000000000000000..fe32c581d6422a821bd27fe57870628981f9f964 --- /dev/null +++ b/images/Shaft_00423.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0473212166962122308981b42bdce37ccc07e0ab1c331e8ea9afcb3ba56d1748 +size 77422 diff --git a/images/Shaft_00424.png b/images/Shaft_00424.png new file mode 100644 index 0000000000000000000000000000000000000000..093ae8231bca221742366f728e37b14ac12b4a11 --- /dev/null +++ b/images/Shaft_00424.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa224cd7600a87264c946a64e621a4c5ddd7b5a5c43a6fc1af1e5bac384be063 +size 90065 diff --git a/images/Shaft_00425.png b/images/Shaft_00425.png new file mode 100644 index 0000000000000000000000000000000000000000..8c72de1faf7a572d53e81cb2f3a7ecc5611c4063 --- /dev/null +++ b/images/Shaft_00425.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c8112bf469b55ae2b23c4e2bebd7baf1359f5264f53e96792ce722d6f146f9f +size 85105 diff --git a/images/Shaft_00426.png b/images/Shaft_00426.png new file mode 100644 index 0000000000000000000000000000000000000000..346d7ed37dbc544106b706bbe3f37ce146f24db1 --- /dev/null +++ b/images/Shaft_00426.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6e5b123fad3729ed5334d9293eb1c871d05e9b1e82030ee64883dd239242f73 +size 110311 diff --git a/images/Shaft_00427.png b/images/Shaft_00427.png new file mode 100644 index 0000000000000000000000000000000000000000..3ddea22fc56e0bb81142624a96daa472131ec6f9 --- /dev/null +++ b/images/Shaft_00427.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bf6db94f2119aa978dc2a2d05c9c0b79d1b35ddf67baafa47ab61634c9bab6c +size 72513 diff --git a/images/Shaft_00428.png b/images/Shaft_00428.png new file mode 100644 index 0000000000000000000000000000000000000000..6fa0242805d4c399eff7feb9234d8d63d0b89d52 --- /dev/null +++ b/images/Shaft_00428.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf1eebdd553ac13b81183ad6f7d4fc6f7a37e1d8d003e4249c14704aa9bc01cb +size 72652 diff --git a/images/Shaft_00429.png b/images/Shaft_00429.png new file mode 100644 index 0000000000000000000000000000000000000000..225921ae7d33afb23794f3ad176c65246852d9ee --- /dev/null +++ b/images/Shaft_00429.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9feda9dd0ebb57f914e3dba597bc430e5705b7a0f3203f574e6b03a9c1e96c4 +size 110721 diff --git a/images/Shaft_00430.png b/images/Shaft_00430.png new file mode 100644 index 0000000000000000000000000000000000000000..654e07f7f4e70f0d0f78dd517f2c78507a6f8572 --- /dev/null +++ b/images/Shaft_00430.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9a374d0cbe6732de934de272ebb2a5655056f4a093bc59023db95798297dbb5 +size 76494 diff --git a/images/Shaft_00431.png b/images/Shaft_00431.png new file mode 100644 index 0000000000000000000000000000000000000000..581a8283083b1f01d241e249a3c511d0a8b81e8f --- /dev/null +++ b/images/Shaft_00431.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d30797267fbf0fab28cbfcf5c1e94d825d34426488797984f439225384ad38a +size 77272 diff --git a/images/Shaft_00432.png b/images/Shaft_00432.png new file mode 100644 index 0000000000000000000000000000000000000000..4bc96349970fa2889ec379b1040601593e53161b --- /dev/null +++ b/images/Shaft_00432.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3cd8fe02dfa4f5b341cb394ae7412c415f5750b961a5220ca80c9b3d32a25ff +size 110946 diff --git a/images/Shaft_00433.png b/images/Shaft_00433.png new file mode 100644 index 0000000000000000000000000000000000000000..8902f40df9e33c8517a8a98432c450203027e505 --- /dev/null +++ b/images/Shaft_00433.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59a3dc6a4d50758666a689f2baac700e9341fb62e20404d0a46799fb6d42fd0e +size 88305 diff --git a/images/Shaft_00434.png b/images/Shaft_00434.png new file mode 100644 index 0000000000000000000000000000000000000000..0799b81bb8046a3578e70c34e40f874d5fed584c --- /dev/null +++ b/images/Shaft_00434.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1ec847e6fb56736d395facf1ecdc75c5b0ae816eba618f1fdb43fd8d66b71b9 +size 102933 diff --git a/images/Shaft_00435.png b/images/Shaft_00435.png new file mode 100644 index 0000000000000000000000000000000000000000..bc48dd16f3addba6839053d6da805f5a02fa2ef1 --- /dev/null +++ b/images/Shaft_00435.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae9390a28548f90553a1b7b2a47cc7ca52f777caa956d1ac2f13526ea3a279dd +size 107769 diff --git a/images/Shaft_00436.png b/images/Shaft_00436.png new file mode 100644 index 0000000000000000000000000000000000000000..b39fa68e8e53db00743b419988df54389a44014d --- /dev/null +++ b/images/Shaft_00436.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:890ef0b95167720c399d96e392eae570aac3323cb47bbce65fa447a3027cc03b +size 99610 diff --git a/images/Shaft_00437.png b/images/Shaft_00437.png new file mode 100644 index 0000000000000000000000000000000000000000..c6c4277189158e5ae392f24a2458328339212c16 --- /dev/null +++ b/images/Shaft_00437.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0473bd0d3005e4b9296dbbfd903692341abe59b3548b90d81904b35c84912f0a +size 67036 diff --git a/images/Shaft_00438.png b/images/Shaft_00438.png new file mode 100644 index 0000000000000000000000000000000000000000..59b7a1d04e72c16780ecb69fb7d0f417dfff4430 --- /dev/null +++ b/images/Shaft_00438.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cae96c3fd6361c0f8ec1a41c3575557a7bf29b60de20f3b7ce0740e9971c6c0 +size 84590 diff --git a/images/Shaft_00439.png b/images/Shaft_00439.png new file mode 100644 index 0000000000000000000000000000000000000000..821032dfd4dbfa6db1abe804875a35b68e2135af --- /dev/null +++ b/images/Shaft_00439.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa8b7ecc898e556c5c164b1cf796d2fcdab25749f10a835d1723728c0a9717f6 +size 103638 diff --git a/images/Shaft_00440.png b/images/Shaft_00440.png new file mode 100644 index 0000000000000000000000000000000000000000..1e83b37aa89a43ddb8f244437627df4841b215c9 --- /dev/null +++ b/images/Shaft_00440.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc7dae1c401a12958204d82e9c1cea210c7537320a8f14f7f7d12fec14254a4e +size 86039 diff --git a/images/Shaft_00441.png b/images/Shaft_00441.png new file mode 100644 index 0000000000000000000000000000000000000000..d91384b1c32198cbb0df6c3468f6d13be9104c35 --- /dev/null +++ b/images/Shaft_00441.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2893eaa755d283acfabaf7f52a078458c6883eb70de498b5689e5475026e879e +size 84835 diff --git a/images/Shaft_00442.png b/images/Shaft_00442.png new file mode 100644 index 0000000000000000000000000000000000000000..711ad3c54ea0341d6a58e43a1c5cade1c5f61187 --- /dev/null +++ b/images/Shaft_00442.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45a40e227ddec6c1a369fd014caff4cac7373f7c5ce9276e41822267261534fc +size 82805 diff --git a/images/Shaft_00443.png b/images/Shaft_00443.png new file mode 100644 index 0000000000000000000000000000000000000000..f1a346e4993d7a237eb2c271047bc8c5277dabb0 --- /dev/null +++ b/images/Shaft_00443.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c45e46178a596a316cc8c8261abd4800a49db5a9056b28c62331ff355f0d154 +size 106747 diff --git a/images/Shaft_00444.png b/images/Shaft_00444.png new file mode 100644 index 0000000000000000000000000000000000000000..ba01231b391af112fe73b78bd9d189c31c7e601d --- /dev/null +++ b/images/Shaft_00444.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:affb5c04c45cbd56fbc1c22303b526a0b76aa4a1b2862acdf7009c4b4223424f +size 71014 diff --git a/images/Shaft_00445.png b/images/Shaft_00445.png new file mode 100644 index 0000000000000000000000000000000000000000..5ddcdd59df26d0222af719f50d450b4d62161b81 --- /dev/null +++ b/images/Shaft_00445.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41effc01416202c632d0309217463fa1b82784b577d65bb251fb5a83f6afc776 +size 90146 diff --git a/images/Shaft_00446.png b/images/Shaft_00446.png new file mode 100644 index 0000000000000000000000000000000000000000..9139f241db0b4f03d9af27caa63916114153c754 --- /dev/null +++ b/images/Shaft_00446.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:295692ca1fb4d433cca15dc81e7eb3a2edd2134203dabeeea8ce20ed6cb46ad1 +size 88096 diff --git a/images/Shaft_00447.png b/images/Shaft_00447.png new file mode 100644 index 0000000000000000000000000000000000000000..d9f9e7565a743d55e7bf7acea68ad519c8d32953 --- /dev/null +++ b/images/Shaft_00447.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82e7e9141ca3ac6c7fa5db885e31f4e9a28362939baca88a47dd7590e946abf0 +size 91178 diff --git a/images/Shaft_00448.png b/images/Shaft_00448.png new file mode 100644 index 0000000000000000000000000000000000000000..06f6a0cf21f1ee35c5ac868d628b819e13611821 --- /dev/null +++ b/images/Shaft_00448.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc308ea5f4836d5873a892544bd5ef04b78b2525b4b214553dcbf9c0092b5266 +size 70571 diff --git a/images/Shaft_00449.png b/images/Shaft_00449.png new file mode 100644 index 0000000000000000000000000000000000000000..f805b511d69b6ff22f91e517636dd97c7cde757f --- /dev/null +++ b/images/Shaft_00449.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e6dcf8fe1d593fb4635c7cf3ac9a241ec51473c5446b5e7e2e027e0acefa6d3 +size 77486 diff --git a/images/Shaft_00450.png b/images/Shaft_00450.png new file mode 100644 index 0000000000000000000000000000000000000000..09bdde81ada8d82b556bdddd44589da6e4e1ec7b --- /dev/null +++ b/images/Shaft_00450.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d755770ab74d3342716230fcd0a6e42b9cc2e2bd1d76e8fa577bd2b52fffd0f6 +size 84990 diff --git a/images/Shaft_00451.png b/images/Shaft_00451.png new file mode 100644 index 0000000000000000000000000000000000000000..63125861f180f8baaf0ddd16105c8fd156f87aa4 --- /dev/null +++ b/images/Shaft_00451.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b951b0b3e8f29f1ba995c6d7cc43cac6ed001ab407d5129c374207311193be87 +size 87691 diff --git a/images/Shaft_00452.png b/images/Shaft_00452.png new file mode 100644 index 0000000000000000000000000000000000000000..fa16505c27107fc49814a414a2d059810ecba7ff --- /dev/null +++ b/images/Shaft_00452.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac0c56e8be20cfc9ea59704e934506f3a4b17ce6133d750ccba01c8f4e9473ee +size 93791 diff --git a/images/Shaft_00453.png b/images/Shaft_00453.png new file mode 100644 index 0000000000000000000000000000000000000000..5d6b6f5a58fc8fb6fcdae0db00fb0e65c5ac4ea7 --- /dev/null +++ b/images/Shaft_00453.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:417bbd938cdb95e9238c4eadc9691ab555fba6b6ceeb4e57a1d9515fbdb0df02 +size 75482 diff --git a/images/Shaft_00454.png b/images/Shaft_00454.png new file mode 100644 index 0000000000000000000000000000000000000000..3fe15d9bb3c72efb7e3406cf510c726195f46d97 --- /dev/null +++ b/images/Shaft_00454.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bb05b88a87abbf9ed0cada5e222d467e83850ea66a9d467dd8fee441ff8ef29 +size 72826 diff --git a/images/Shaft_00455.png b/images/Shaft_00455.png new file mode 100644 index 0000000000000000000000000000000000000000..f9be9876f1414870b5126b72f245ffd2ec68dedb --- /dev/null +++ b/images/Shaft_00455.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:867562ff981bfd234928eb92fda7c2e125e295a55de0ba2bd547f380d42c8d84 +size 92536 diff --git a/images/Shaft_00456.png b/images/Shaft_00456.png new file mode 100644 index 0000000000000000000000000000000000000000..bd6c0626eda33961cdc77d79798725e4faa70f50 --- /dev/null +++ b/images/Shaft_00456.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72826a075298215ef14a9298c34e82e9ba37bad437429e343c759195742c46fe +size 75091 diff --git a/images/Shaft_00457.png b/images/Shaft_00457.png new file mode 100644 index 0000000000000000000000000000000000000000..a755a808864c59fb4a221f4f270d743921beb1f2 --- /dev/null +++ b/images/Shaft_00457.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f80d0b9d96d4f4344e4b2ab8dce9ec9af33fc522a33c69726016c4f45b477592 +size 80631 diff --git a/images/Shaft_00458.png b/images/Shaft_00458.png new file mode 100644 index 0000000000000000000000000000000000000000..b529bc8735989513b84b0814367afcfb8b5ae719 --- /dev/null +++ b/images/Shaft_00458.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e6a0945a4796330aa54eafe170d10c27f0c28fc6e02e0ebc6ae45ffb5f6f8dc +size 80882 diff --git a/images/Shaft_00459.png b/images/Shaft_00459.png new file mode 100644 index 0000000000000000000000000000000000000000..29e6b9e08b2b07c5c86c29427b54637246bfcbba --- /dev/null +++ b/images/Shaft_00459.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f5eba5b10d341a81ab920b9e23949bd2cb24ba9a3e7001b89709a832293162a +size 95872 diff --git a/images/Shaft_00460.png b/images/Shaft_00460.png new file mode 100644 index 0000000000000000000000000000000000000000..9ac7a999a244b9dc5b82db7434192af073b61346 --- /dev/null +++ b/images/Shaft_00460.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eada57031a337b6e671fca3b429be0af786e4bca3a159ab02daa755dab01f5bb +size 95834 diff --git a/images/Shaft_00461.png b/images/Shaft_00461.png new file mode 100644 index 0000000000000000000000000000000000000000..51ea6b39a518be1863672330f2a5edb82def5546 --- /dev/null +++ b/images/Shaft_00461.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9ea4b4ffdef38cb5cabe122fcddf41eb68db33dfa4464739c50910323bce338 +size 86060 diff --git a/images/Shaft_00462.png b/images/Shaft_00462.png new file mode 100644 index 0000000000000000000000000000000000000000..9051f55057876198654c24b6ca49a8d9165ba9e1 --- /dev/null +++ b/images/Shaft_00462.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:526d5110b12a1580b3194f241412448711442fc8b1f2d06a6bc2f8e80a3e3ba7 +size 83202 diff --git a/images/Shaft_00463.png b/images/Shaft_00463.png new file mode 100644 index 0000000000000000000000000000000000000000..7bf28fb570187560877f4274ed481ef31ca8129a --- /dev/null +++ b/images/Shaft_00463.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb615f6ca690ac3daae6ba9f625f0b7900918b5b23d5852e038c330f9e86027b +size 83475 diff --git a/images/Shaft_00464.png b/images/Shaft_00464.png new file mode 100644 index 0000000000000000000000000000000000000000..4b1701d65238af69e8c34c4b32b811048a320c60 --- /dev/null +++ b/images/Shaft_00464.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f2b9f30fa8cf2bf3566ca4953e521f36f8d4ef519690090c2b213c7100d830e +size 68574 diff --git a/images/Shaft_00465.png b/images/Shaft_00465.png new file mode 100644 index 0000000000000000000000000000000000000000..f04b7df3e4ee7ff7154586f4cce62df1a6308f98 --- /dev/null +++ b/images/Shaft_00465.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82fa2d23f75ca04658ff833ed93757aef85285f1b0fb7f7144114e56b8efa63b +size 105120 diff --git a/images/Shaft_00466.png b/images/Shaft_00466.png new file mode 100644 index 0000000000000000000000000000000000000000..f345b83cd7c7549d3e4b1ccdbc9a55ff61c6f46c --- /dev/null +++ b/images/Shaft_00466.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e6937b336919be6c1fccdc3dde5ca3d1413217a1865de444c050eb9ec3c406e +size 77856 diff --git a/images/Shaft_00467.png b/images/Shaft_00467.png new file mode 100644 index 0000000000000000000000000000000000000000..3c6c038f674aed4b0594fb3d0237ed0360342324 --- /dev/null +++ b/images/Shaft_00467.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c773e0372c8a7b8538ce74303b08943178020724b8b90fd1463e52fef0c498b2 +size 104003 diff --git a/images/Shaft_00468.png b/images/Shaft_00468.png new file mode 100644 index 0000000000000000000000000000000000000000..6e36570d1157f7569df7b555aef331b8ecad442d --- /dev/null +++ b/images/Shaft_00468.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3aac3dd9c3d777ea593d36b8ee7cb68d84a89f47ce73c6da448a1c158bb6679b +size 79778 diff --git a/images/Shaft_00469.png b/images/Shaft_00469.png new file mode 100644 index 0000000000000000000000000000000000000000..102b8ac70565b80602e9e8cebaa5ed5bf92718b5 --- /dev/null +++ b/images/Shaft_00469.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ec0762732d7a56e822021e0e6cc5b4e1e569f9eb5bc0d498f21ad0ecf65ccec +size 94947 diff --git a/images/Shaft_00470.png b/images/Shaft_00470.png new file mode 100644 index 0000000000000000000000000000000000000000..cb7ce535a2439b777c4f2f875cef44e3845edd8f --- /dev/null +++ b/images/Shaft_00470.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e5286fe9ed34ccb82aadc1c3cc41a1f7a20559b57aac7499b58a4e760dc6eb2 +size 72313 diff --git a/images/Shaft_00471.png b/images/Shaft_00471.png new file mode 100644 index 0000000000000000000000000000000000000000..ae82229fb14a0febcb7ede1117de9619666f5c79 --- /dev/null +++ b/images/Shaft_00471.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57e7bc86f001272e93662fb0fd8b2e1ce09f22dae55198fff8ddf22d37bb2431 +size 91352 diff --git a/images/Shaft_00472.png b/images/Shaft_00472.png new file mode 100644 index 0000000000000000000000000000000000000000..a47283551fa193e030d14e961d501117c2157809 --- /dev/null +++ b/images/Shaft_00472.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ceab7540a5a2ca473a0f89e2264a0a2082a4f5e19c06b1960089bc7ea69157b +size 90661 diff --git a/images/Shaft_00473.png b/images/Shaft_00473.png new file mode 100644 index 0000000000000000000000000000000000000000..c33e53f047d732b2fc12bbc5570fb8f8aa7ac959 --- /dev/null +++ b/images/Shaft_00473.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:326637814b2a86914d8393500e0c9306d0ff2cb5f19c5590c6690c6941fdf412 +size 89628 diff --git a/images/Shaft_00474.png b/images/Shaft_00474.png new file mode 100644 index 0000000000000000000000000000000000000000..709850fec93cc4e286f664caa8aed5e98c7cb20a --- /dev/null +++ b/images/Shaft_00474.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2240348c3e3e59dcbd6cbb9e9303b6947f1e9db7ac7c2faced6f3aa32b6be987 +size 76641 diff --git a/images/Shaft_00475.png b/images/Shaft_00475.png new file mode 100644 index 0000000000000000000000000000000000000000..a0bb03717744aa381a43dff5c78816757a3dcf1a --- /dev/null +++ b/images/Shaft_00475.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56b41bff5f2c37f966234219054659aabd0dc60d686124194dd3f69900b9aae5 +size 83471 diff --git a/images/Shaft_00476.png b/images/Shaft_00476.png new file mode 100644 index 0000000000000000000000000000000000000000..61809444665f27275c178217cb4c1790d83ed13b --- /dev/null +++ b/images/Shaft_00476.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56762278841a572ec5c1ece87fa8da6ee28beee5c58532009365049c69235b13 +size 101373 diff --git a/images/Shaft_00477.png b/images/Shaft_00477.png new file mode 100644 index 0000000000000000000000000000000000000000..5f6f26be005040e32781be895405af38041360e0 --- /dev/null +++ b/images/Shaft_00477.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dce5bca4fbd0283bbd9fd36815185578bce102e7816c99a561f6abaa3249d7c +size 94254 diff --git a/images/Shaft_00478.png b/images/Shaft_00478.png new file mode 100644 index 0000000000000000000000000000000000000000..6d5ef5d97ddfbcc9d71375e5fcd9729036864339 --- /dev/null +++ b/images/Shaft_00478.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4c8fd69a4853c10afd42a051011b93905d959d50e88fd92461df3467db5bfbf +size 94714 diff --git a/images/Shaft_00479.png b/images/Shaft_00479.png new file mode 100644 index 0000000000000000000000000000000000000000..d6831c8bff4c0b86202c93853a32389f8bde0adf --- /dev/null +++ b/images/Shaft_00479.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:665c9c6d2991efe86b7fc2694d538dcdbbf79b2ca809bfb8b7ee0cd94b3ffdd0 +size 71833 diff --git a/images/Shaft_00480.png b/images/Shaft_00480.png new file mode 100644 index 0000000000000000000000000000000000000000..d3da225d7879d3ae9d8953610cf208937861f863 --- /dev/null +++ b/images/Shaft_00480.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:908f19c7831a40eec7233c92c966a168f3dbdbf178c69816ae0a40a94b814a61 +size 89221 diff --git a/images/Shaft_00481.png b/images/Shaft_00481.png new file mode 100644 index 0000000000000000000000000000000000000000..55460c32206242d9c6c2f624b77ba4a9e0a463e7 --- /dev/null +++ b/images/Shaft_00481.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18e2ae54537f9cf9879048c38a2265d41b466e48b7f694a54740be2bedab22bd +size 81584 diff --git a/images/Shaft_00482.png b/images/Shaft_00482.png new file mode 100644 index 0000000000000000000000000000000000000000..fdcf092b75a99e1eb3d75cd4275120942ef700c1 --- /dev/null +++ b/images/Shaft_00482.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5343bfac6ac3c2c7fa0d98f01a7908a2dac26850819e2913838a84247334b463 +size 98116 diff --git a/images/Shaft_00483.png b/images/Shaft_00483.png new file mode 100644 index 0000000000000000000000000000000000000000..7078d44948c17ab92f61b099f0acaa6bc33774a7 --- /dev/null +++ b/images/Shaft_00483.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da59a69e8030c0288ffab25d90db700c0b77bbdc9f5d778294920e24f3d3dcff +size 116143 diff --git a/images/Shaft_00484.png b/images/Shaft_00484.png new file mode 100644 index 0000000000000000000000000000000000000000..1c6cf8a40e3a71c11af742663f987e73aacd743e --- /dev/null +++ b/images/Shaft_00484.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af5b862f9a0b733a316a2cee5b0403bdf7996aa445654152c2aaa3ae535daa24 +size 100225 diff --git a/images/Shaft_00485.png b/images/Shaft_00485.png new file mode 100644 index 0000000000000000000000000000000000000000..f1a0d6cf8b804b70c0976bc1123115ca160ffad9 --- /dev/null +++ b/images/Shaft_00485.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb40fca1b5e9a7f92139b6bd748a5f950d2ca369820b771284918f354bca2719 +size 122064 diff --git a/images/Shaft_00486.png b/images/Shaft_00486.png new file mode 100644 index 0000000000000000000000000000000000000000..5aacb59bd3d011f014c5788f60deef41dc358a13 --- /dev/null +++ b/images/Shaft_00486.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf3af14a21d2c7a63d3eef465b4fe66f5214963631a3ae64f5d12d6f04f646f3 +size 85029 diff --git a/images/Shaft_00487.png b/images/Shaft_00487.png new file mode 100644 index 0000000000000000000000000000000000000000..845a8d0c2e4572ac8d5b28c7fb1ffb3a31c1b787 --- /dev/null +++ b/images/Shaft_00487.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22f9f9eb3533ba2a10c0a5b59ec3ec413e5fb97d3e13f519e617d22825a8a604 +size 88848 diff --git a/images/Shaft_00488.png b/images/Shaft_00488.png new file mode 100644 index 0000000000000000000000000000000000000000..f99c66024ad20a47cef1ea1da432777eba1f344a --- /dev/null +++ b/images/Shaft_00488.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:295f5bf8f10a7d10f27fb68e7cc275b848c6374600353fd6ac6569a896fb3f6d +size 87089 diff --git a/images/Shaft_00489.png b/images/Shaft_00489.png new file mode 100644 index 0000000000000000000000000000000000000000..f30791ff640279814d4d0c128a14873caefb7f84 --- /dev/null +++ b/images/Shaft_00489.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7fe45b9bf5fe4918f85f6a87096ff7eaa4be59f69f6027fb3996be238ba698d +size 110833 diff --git a/images/Shaft_00490.png b/images/Shaft_00490.png new file mode 100644 index 0000000000000000000000000000000000000000..bb37157c74b56bfa4a3353cdc9263bf5224c71b7 --- /dev/null +++ b/images/Shaft_00490.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b662d84c787f4e7d90d665b16bde9464b79cff2af35323cbd7f588b4f5a5cb2 +size 79900 diff --git a/images/Shaft_00491.png b/images/Shaft_00491.png new file mode 100644 index 0000000000000000000000000000000000000000..a03e2b5c79a8d438653b87407fb8a7e7b171dbe5 --- /dev/null +++ b/images/Shaft_00491.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:312d120d78c9889a19a9cfff68300940b41431033975643707a43d765641076b +size 104527 diff --git a/images/Shaft_00492.png b/images/Shaft_00492.png new file mode 100644 index 0000000000000000000000000000000000000000..1a6737ae69e0ddbd575c16577d799dc99c74c184 --- /dev/null +++ b/images/Shaft_00492.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca9515d4179dbaa767207d978d0ef8210afc9b7ccba6419fb5420b6545002e03 +size 89261 diff --git a/images/Shaft_00493.png b/images/Shaft_00493.png new file mode 100644 index 0000000000000000000000000000000000000000..a7a763e48661716c5d074cbaa4644eb8ea17d03b --- /dev/null +++ b/images/Shaft_00493.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a34c4987e3b79e743e3c4f02447308e09e3b10db85477ab17ba3151b43d7f8ab +size 93674 diff --git a/images/Shaft_00494.png b/images/Shaft_00494.png new file mode 100644 index 0000000000000000000000000000000000000000..dff4bcaa64287a7282a7c5bda9d6673dc78c5625 --- /dev/null +++ b/images/Shaft_00494.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44acfe22057d8e88bcc0d33324fc22788a7ecdf992248bda847bf9ef302b5b19 +size 104942 diff --git a/images/Shaft_00495.png b/images/Shaft_00495.png new file mode 100644 index 0000000000000000000000000000000000000000..5a2f6a6d524e7e334f24736ad432dd80b69aa3f5 --- /dev/null +++ b/images/Shaft_00495.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0b9a8c5b8caa8615b43e3f82106ceb0066e3243396733c297e8a3e1c41ceec9 +size 97345 diff --git a/images/Shaft_00496.png b/images/Shaft_00496.png new file mode 100644 index 0000000000000000000000000000000000000000..89974caefa408e3a3c0a5cf55e829338083065ca --- /dev/null +++ b/images/Shaft_00496.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b0164c37418ced0f116041ea1977683f9ac6c4f1c238b7353959c6575409117 +size 73531 diff --git a/images/Shaft_00497.png b/images/Shaft_00497.png new file mode 100644 index 0000000000000000000000000000000000000000..9cb7476fcb47b24c97190a2f45b5621556932dc4 --- /dev/null +++ b/images/Shaft_00497.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea75902a29d6dbb2de8bde53e173a09bce325162415b7236771caa0afe3cc44c +size 89563 diff --git a/images/Shaft_00498.png b/images/Shaft_00498.png new file mode 100644 index 0000000000000000000000000000000000000000..1e576265f2bbea8485ccd3bac232ebf8c58065ba --- /dev/null +++ b/images/Shaft_00498.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbe37a8e95b106a3a148f2efd2ae85a523bb62288ca82100608337aeb2e037db +size 90158 diff --git a/images/Shaft_00499.png b/images/Shaft_00499.png new file mode 100644 index 0000000000000000000000000000000000000000..14bb99ba82172c68eb90ff58314543cf34f6fa99 --- /dev/null +++ b/images/Shaft_00499.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df84fc416d3fdb26198a54ca763384807bb76f8b405d97c739e8ccbc0a5b7bb7 +size 86323 diff --git a/images/Shaft_00500.png b/images/Shaft_00500.png new file mode 100644 index 0000000000000000000000000000000000000000..b2ea0d6bd35f736fb8097ee68a0ecae1d746ef74 --- /dev/null +++ b/images/Shaft_00500.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:863e55f4b5a1f576bd37f4969d5549a91a92d12be5d97137fbc35c4721830011 +size 84189 diff --git a/images/Shaft_00501.png b/images/Shaft_00501.png new file mode 100644 index 0000000000000000000000000000000000000000..5e024be070b4294f700b69740bd5ffebb138008d --- /dev/null +++ b/images/Shaft_00501.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e76f44e81f21c0d50e895365d211e9c4ce629f08500b92a9a74e437bd978d28 +size 78882 diff --git a/images/Shaft_00502.png b/images/Shaft_00502.png new file mode 100644 index 0000000000000000000000000000000000000000..a150e9abf3bd39cfafb497aa5f91ab5106e9cf52 --- /dev/null +++ b/images/Shaft_00502.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bd5e99203f2a7a729f1ec10599874d5beff72a107fa791dda9a1be8ca7e2cbc +size 96948 diff --git a/images/Shaft_00503.png b/images/Shaft_00503.png new file mode 100644 index 0000000000000000000000000000000000000000..b9bfff6e868d2dd67de0258bea8496867b74793a --- /dev/null +++ b/images/Shaft_00503.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3723e3a61b0e3793636bb0aff1b83c8d7040338c1cd96d4f3a86a7f1d9d796d +size 78409 diff --git a/images/Shaft_00504.png b/images/Shaft_00504.png new file mode 100644 index 0000000000000000000000000000000000000000..62f89c7a6452fbb6dbbf0d340ed87ae9ce7816b5 --- /dev/null +++ b/images/Shaft_00504.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2adb93b196e3631cc7925115c29bacc41ac9131f3c38fde70c12b5d520c07c8 +size 77547 diff --git a/images/Shaft_00505.png b/images/Shaft_00505.png new file mode 100644 index 0000000000000000000000000000000000000000..b35e30345432d40b0150ebdafe796a701e16868c --- /dev/null +++ b/images/Shaft_00505.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff583e9150892cf504824d81b41d5782c9d82294ab7a188e2e366d05bcabe230 +size 106065 diff --git a/images/Shaft_00506.png b/images/Shaft_00506.png new file mode 100644 index 0000000000000000000000000000000000000000..1e04e33afd1eb647ec93d74f379feed8e3a92c0c --- /dev/null +++ b/images/Shaft_00506.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fca9c9e6a0ee6371a6a3a32d325960eab47daa87aa3ec83831f9641236c68b63 +size 104183 diff --git a/images/Shaft_00507.png b/images/Shaft_00507.png new file mode 100644 index 0000000000000000000000000000000000000000..9c7ffe5a818293c44e897e1447c51c36d93a735e --- /dev/null +++ b/images/Shaft_00507.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e5b84cde1635f5e0873e20a1d93bd0595e44ef617ff64d34ffa5c5be9c7b0d3 +size 83729 diff --git a/images/Shaft_00508.png b/images/Shaft_00508.png new file mode 100644 index 0000000000000000000000000000000000000000..4857f7b0dc7b372c7cc03d048db67230d1916008 --- /dev/null +++ b/images/Shaft_00508.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc2076e97ef81160d9c2e81381d4622a9ffccb2f4a890f36a2cd6b56f824c469 +size 87569 diff --git a/images/Shaft_00509.png b/images/Shaft_00509.png new file mode 100644 index 0000000000000000000000000000000000000000..cfddf09aab7be128375a157f9969030f35d3d7a7 --- /dev/null +++ b/images/Shaft_00509.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f22859c1acb05d985621016d0382a174f472d097e3b1d3d11d7f05271479dd20 +size 78354 diff --git a/images/Shaft_00510.png b/images/Shaft_00510.png new file mode 100644 index 0000000000000000000000000000000000000000..4903e1263d7dc47770f6504198b1cb698d0e748b --- /dev/null +++ b/images/Shaft_00510.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6374d0ca1b5d2936e96e4c0d035e13c2ff1206022f39612a74c160fb0544c772 +size 101691 diff --git a/images/Shaft_00511.png b/images/Shaft_00511.png new file mode 100644 index 0000000000000000000000000000000000000000..896dae36b8e5bb7ff16abee5c01f00863243d2e8 --- /dev/null +++ b/images/Shaft_00511.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19de9072e574f19e9a13700d01b63850afd74d2e9cb508f879204ec5599a3aea +size 70982 diff --git a/images/Shaft_00512.png b/images/Shaft_00512.png new file mode 100644 index 0000000000000000000000000000000000000000..df93af6e25059b74e4f935a6ccced05fa875a50d --- /dev/null +++ b/images/Shaft_00512.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad43a458596a75b1f8ab2a717918d2f71ed72d5215bd6ca7dde9c2649b76088c +size 80365 diff --git a/images/Shaft_00513.png b/images/Shaft_00513.png new file mode 100644 index 0000000000000000000000000000000000000000..796401203ff68db15d6e55519c2cd539328afb76 --- /dev/null +++ b/images/Shaft_00513.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba31a3c21b2e35c3c012111f14cb3d414c3a2e3fb3ac2d380361e557e0489231 +size 89862 diff --git a/images/Shaft_00514.png b/images/Shaft_00514.png new file mode 100644 index 0000000000000000000000000000000000000000..a471ffd87903078a4c7814098295cd62cc7c26c7 --- /dev/null +++ b/images/Shaft_00514.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a15b56ae80812aac49e5819f92851a115c1320859ee1ec679a3336b819a9af9 +size 68722 diff --git a/images/Shaft_00515.png b/images/Shaft_00515.png new file mode 100644 index 0000000000000000000000000000000000000000..b5da5c875d15bed14603773e1649edab7138183d --- /dev/null +++ b/images/Shaft_00515.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5156b30b35d8f221992f2bf34a6a647f64aac3377d56c7344c49a61c34c12721 +size 84756 diff --git a/images/Shaft_00516.png b/images/Shaft_00516.png new file mode 100644 index 0000000000000000000000000000000000000000..9ce0c8d63c4406616bf90f5bfc7d095b92d9beb7 --- /dev/null +++ b/images/Shaft_00516.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a78e5ec3e00726f10955eb3c30836480f8bc992c0fea4d5bccf7aeac44df63ea +size 88133 diff --git a/images/Shaft_00517.png b/images/Shaft_00517.png new file mode 100644 index 0000000000000000000000000000000000000000..9e92cf7474e111d5a4297e35d1a0e4e7d1faad6c --- /dev/null +++ b/images/Shaft_00517.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bdfebfd366100d14db675d72b9da504750f35ab81f51423f83df1bc2010353f6 +size 70729 diff --git a/images/Shaft_00518.png b/images/Shaft_00518.png new file mode 100644 index 0000000000000000000000000000000000000000..1fe1ccfd5de899061e58efe6c5f871974155d8ce --- /dev/null +++ b/images/Shaft_00518.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca9837b4941cc07774819369a63f9ed8e6bb2e8df67a7153ca963a94bb288ae6 +size 71657 diff --git a/images/Shaft_00519.png b/images/Shaft_00519.png new file mode 100644 index 0000000000000000000000000000000000000000..96c9d3189997602d26c1035d45578abb6989484f --- /dev/null +++ b/images/Shaft_00519.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94a7e742439c459c8c346a836f9965f490fe50e3f4950e77dba03123c8c69b9a +size 82412 diff --git a/images/Shaft_00520.png b/images/Shaft_00520.png new file mode 100644 index 0000000000000000000000000000000000000000..2ab93b47c6c1ea898ef513085d731e56c733550d --- /dev/null +++ b/images/Shaft_00520.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:053a4be464529d358e4d5906f2cd63096d0fb0a4f7ef2b4eea39bd7bbe23d657 +size 70232 diff --git a/images/Shaft_00521.png b/images/Shaft_00521.png new file mode 100644 index 0000000000000000000000000000000000000000..0bc2d34ac272ebe9bf5828738c88cf878fecf64b --- /dev/null +++ b/images/Shaft_00521.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fee49726e4f450994b012a5f389e73e3bfce89ece2c9717f86cb1d4abfb8d0f +size 106695 diff --git a/images/Shaft_00522.png b/images/Shaft_00522.png new file mode 100644 index 0000000000000000000000000000000000000000..2beeb42c7192dd61a7d33fc222df536d242c441c --- /dev/null +++ b/images/Shaft_00522.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b556c9e847525e2aac350a93f9b4a2a98dbf1a0ce3fe0a1ead327fa45056706 +size 102001 diff --git a/images/Shaft_00523.png b/images/Shaft_00523.png new file mode 100644 index 0000000000000000000000000000000000000000..00e7dbdd81520d9a79675dfbd7a39104eee35548 --- /dev/null +++ b/images/Shaft_00523.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7874143e88b73ce6ff4141e45724de0ddfbd869d77141ca9caded1b7b67f8614 +size 95576 diff --git a/images/Shaft_00524.png b/images/Shaft_00524.png new file mode 100644 index 0000000000000000000000000000000000000000..fba5b615e5189f6ab1c36953c634fbd512d5eda3 --- /dev/null +++ b/images/Shaft_00524.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03239ab66d887bca05cf22e6b364175793e8dc8e67e9cbaa3495d7d02e83c72e +size 108488 diff --git a/images/Shaft_00525.png b/images/Shaft_00525.png new file mode 100644 index 0000000000000000000000000000000000000000..25c1f350b60e45f95e5ce665f296a4a83b217da4 --- /dev/null +++ b/images/Shaft_00525.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ae6dd49a2f40fedf9eaf3a10241e80ff6ab0f1bb503edcadf2197403785e82e +size 77378 diff --git a/images/Shaft_00526.png b/images/Shaft_00526.png new file mode 100644 index 0000000000000000000000000000000000000000..aba1617836b85994c8746ffdd44cce811b99adc4 --- /dev/null +++ b/images/Shaft_00526.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88f6c603b1e1e70d85599b004269508a69a80030a5077e4f72425cd4a47d7404 +size 92875 diff --git a/images/Shaft_00527.png b/images/Shaft_00527.png new file mode 100644 index 0000000000000000000000000000000000000000..9097cc33f953edcafc591a98ba69c8a475314472 --- /dev/null +++ b/images/Shaft_00527.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:285d9cf60e651bd6b54a39bb652ae8dfd6e7dbda31a083c838ae5774bb33018b +size 75066 diff --git a/images/Shaft_00528.png b/images/Shaft_00528.png new file mode 100644 index 0000000000000000000000000000000000000000..a8aea94cf1d3032f7d434e82f562cffa8bc364e8 --- /dev/null +++ b/images/Shaft_00528.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0350e9ec49891550d29c72355c7d52f1899e10a4c1d7cf3004d1462810f93617 +size 103425 diff --git a/images/Shaft_00529.png b/images/Shaft_00529.png new file mode 100644 index 0000000000000000000000000000000000000000..45dd9a14f84be913af0384f07a1056d3bfa25149 --- /dev/null +++ b/images/Shaft_00529.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88cd90868de6a900d8f43c79f2f2022e37fadeb3b9915dbe93cd8d01336a4df1 +size 99733 diff --git a/images/Shaft_00530.png b/images/Shaft_00530.png new file mode 100644 index 0000000000000000000000000000000000000000..9df3ec4a3d6d19c58711d4fa342a61f0da667efb --- /dev/null +++ b/images/Shaft_00530.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbb22546f3bb593648952aae29f89239c69f20fcb17dd711136f102218b64994 +size 72707 diff --git a/images/Shaft_00531.png b/images/Shaft_00531.png new file mode 100644 index 0000000000000000000000000000000000000000..c1d50485efeffc970ee5c8240cebb22972833eb5 --- /dev/null +++ b/images/Shaft_00531.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e75698be7eb8f3896e506b4a21626809409b5cb6575a0e593f80f9ed1cc4354b +size 106696 diff --git a/images/Shaft_00532.png b/images/Shaft_00532.png new file mode 100644 index 0000000000000000000000000000000000000000..b55f95f5223e84c3d97b5c4692b91beb5a0c2fdd --- /dev/null +++ b/images/Shaft_00532.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad1726d56559bb80cbb7ddebf39f86866285ac341d2b283de912e3d6f583ded8 +size 79452 diff --git a/images/Shaft_00533.png b/images/Shaft_00533.png new file mode 100644 index 0000000000000000000000000000000000000000..11dadd747e1a168fc359c78f0bfd35ff8177d7e2 --- /dev/null +++ b/images/Shaft_00533.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0af21387d6d126e85b63ce0ae1b7c68806cdf33d3dd1ef20b2f6d05fdf53cd4e +size 87832 diff --git a/images/Shaft_00534.png b/images/Shaft_00534.png new file mode 100644 index 0000000000000000000000000000000000000000..5a4c1d69bbacaa6fefc0f811fd45768a844d7488 --- /dev/null +++ b/images/Shaft_00534.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:103f506ac9b67c8889df32d79054355a475aedfeaa99653de9b6ee3fd5c325fd +size 69616 diff --git a/images/Shaft_00535.png b/images/Shaft_00535.png new file mode 100644 index 0000000000000000000000000000000000000000..e90bb5560c501f3836ed6b4a4fb5b30861ac504c --- /dev/null +++ b/images/Shaft_00535.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c9aa95b075d4699fba286a37fac7f2daee925ca11aac9cda64f76e3504f23cd +size 80334 diff --git a/images/Shaft_00536.png b/images/Shaft_00536.png new file mode 100644 index 0000000000000000000000000000000000000000..a70340f701eed7803ab5baa26d911f7e13f357eb --- /dev/null +++ b/images/Shaft_00536.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:252ed0f6d0e38a66df372e00f21cfa43ce9d8091d5dd1edb8a1e82b2ccae08f7 +size 75817 diff --git a/images/Shaft_00537.png b/images/Shaft_00537.png new file mode 100644 index 0000000000000000000000000000000000000000..0687e98ccf290e296d14a6adea9b5d35628e0337 --- /dev/null +++ b/images/Shaft_00537.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1e2b25ef092a36c8f8de23d4b009850a80fddbe6d77e54e1ab8da3ccbcbafa8 +size 79929 diff --git a/images/Shaft_00538.png b/images/Shaft_00538.png new file mode 100644 index 0000000000000000000000000000000000000000..6f3992b114ff1291d2d46f8042baca71c7fe55f5 --- /dev/null +++ b/images/Shaft_00538.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56f8cd7e94a9f1ee61c71dac8340b31694ff7f6d14910ba275d87e04c6b087ea +size 105999 diff --git a/images/Shaft_00539.png b/images/Shaft_00539.png new file mode 100644 index 0000000000000000000000000000000000000000..a11e7bda740b871ac716136fef19e103e6b19b35 --- /dev/null +++ b/images/Shaft_00539.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74deb44b8e87d7228323eb06efebf77cf25e8a7e2207d10d2b3a4cdc89fbe06a +size 79014 diff --git a/images/Shaft_00540.png b/images/Shaft_00540.png new file mode 100644 index 0000000000000000000000000000000000000000..84d18ba46d95dab57f25a066ea36948df790b1a2 --- /dev/null +++ b/images/Shaft_00540.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb020374da1881ef8f94ad858dd0c0c304c6525236cf46464476a54089a09ef7 +size 100808 diff --git a/images/Shaft_00541.png b/images/Shaft_00541.png new file mode 100644 index 0000000000000000000000000000000000000000..6152988527d370875d0fac4f7d43978ff56ca1b1 --- /dev/null +++ b/images/Shaft_00541.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74b0911af347a9887325933d7241c820dc51a844097489b4ded6451948331b53 +size 78970 diff --git a/images/Shaft_00542.png b/images/Shaft_00542.png new file mode 100644 index 0000000000000000000000000000000000000000..7804c987b5a5077b77ded2561bd45eedc15f47ce --- /dev/null +++ b/images/Shaft_00542.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4648c967eeef9661da8da675d6e4ea0f84b1290534fbe91cdc59cb7e950e0b82 +size 75102 diff --git a/images/Shaft_00543.png b/images/Shaft_00543.png new file mode 100644 index 0000000000000000000000000000000000000000..6fae636404c4e7992f795922803ced49b50d9edf --- /dev/null +++ b/images/Shaft_00543.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80a578354ebd555acab1d107f466807228d32c02861d7a5816d3ca796a459963 +size 103945 diff --git a/images/Shaft_00544.png b/images/Shaft_00544.png new file mode 100644 index 0000000000000000000000000000000000000000..64214163c2bd317f0e0c6e811214eae02c5ff811 --- /dev/null +++ b/images/Shaft_00544.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ff2fded54e746586ccc6d44d463482c8870466de63697607d37dc2a85be10d6 +size 81516 diff --git a/images/Shaft_00545.png b/images/Shaft_00545.png new file mode 100644 index 0000000000000000000000000000000000000000..d5761813969a95a7d33eb18b150564a8f7ee08c2 --- /dev/null +++ b/images/Shaft_00545.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03dab997697ec2e2bdd074e6500fbc592fc187585414e094966bb1b2f5cdca17 +size 95202 diff --git a/images/Shaft_00546.png b/images/Shaft_00546.png new file mode 100644 index 0000000000000000000000000000000000000000..c2849e12b1a98881a36e91a8ce6b8138eaaef808 --- /dev/null +++ b/images/Shaft_00546.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0ce1c03158b85ca0a8c73cdc6e316e0cb9c00d53f150f463bd7afc74b835fe7 +size 86514 diff --git a/images/Shaft_00547.png b/images/Shaft_00547.png new file mode 100644 index 0000000000000000000000000000000000000000..cab689d07b630897e3690f31f99c45ee3d3957fe --- /dev/null +++ b/images/Shaft_00547.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd7a7aea7249f67261d5e61e94a788ce36fe6b3aaf6daeb69a911ffe2f72aac4 +size 72478 diff --git a/images/Shaft_00548.png b/images/Shaft_00548.png new file mode 100644 index 0000000000000000000000000000000000000000..09246c80d1ec0ee763fd3e4c71bfb9cba02430de --- /dev/null +++ b/images/Shaft_00548.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d711bd7393007845bd41ff7ba303b128d07755f5296753a722901e5e91da1f5c +size 93917 diff --git a/images/Shaft_00549.png b/images/Shaft_00549.png new file mode 100644 index 0000000000000000000000000000000000000000..f9ec2546f8069a27617dfbf572a436a6ca62c3a2 --- /dev/null +++ b/images/Shaft_00549.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fc37bf9330dc5f85f5659096126e7b055ac9f6874d33e38b3fa758259dea5bf +size 94456 diff --git a/images/Shaft_00550.png b/images/Shaft_00550.png new file mode 100644 index 0000000000000000000000000000000000000000..8ebf9f01ede5dede81c57e12ea9342375ff59bd6 --- /dev/null +++ b/images/Shaft_00550.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02ecd87a46920394bdd6290dc5e8560a25431ad4ca45447c245a2c6f2928d6b0 +size 75405 diff --git a/images/Shaft_00551.png b/images/Shaft_00551.png new file mode 100644 index 0000000000000000000000000000000000000000..bd934b3fff88ff347a09fbeeff764db9f2ce4091 --- /dev/null +++ b/images/Shaft_00551.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87df4c637bf13b3e277d31d499f956ccba8f717651adeddd1e43317066bed69d +size 71180 diff --git a/images/Shaft_00552.png b/images/Shaft_00552.png new file mode 100644 index 0000000000000000000000000000000000000000..72c216852e80b0148fd04348266dda6c29f8381e --- /dev/null +++ b/images/Shaft_00552.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55bb46f9fa35b4bc719dd51435de0785f8153fd82df19202a3ed82f8bdba0e5e +size 114778 diff --git a/images/Shaft_00553.png b/images/Shaft_00553.png new file mode 100644 index 0000000000000000000000000000000000000000..0188d3ede97c45d4f40c033fc8fed9704f6eade5 --- /dev/null +++ b/images/Shaft_00553.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5881864dd3633b74ebba2a877bbe68d87183e3f632c1af37225f51ed5ac2ced0 +size 103055 diff --git a/images/Shaft_00554.png b/images/Shaft_00554.png new file mode 100644 index 0000000000000000000000000000000000000000..d845ed0a015027ca86b1d492c5a7cf7b0fa1496b --- /dev/null +++ b/images/Shaft_00554.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce876cbc055e127b218552abbda5a11ea060d6b93ebd8c23feaa7cc27db74d1f +size 92006 diff --git a/images/Shaft_00555.png b/images/Shaft_00555.png new file mode 100644 index 0000000000000000000000000000000000000000..0cb3579c88fec5bcf41216d99d3167b0094af1c2 --- /dev/null +++ b/images/Shaft_00555.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e14b9e8f3a9d27d311ef782bc56c5cc793e841b5048f3006cffc51c1c97f422 +size 83618 diff --git a/images/Shaft_00556.png b/images/Shaft_00556.png new file mode 100644 index 0000000000000000000000000000000000000000..efa17065c9d58a07c3775e7d85afa7a4769ec533 --- /dev/null +++ b/images/Shaft_00556.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de9e0cc3cd0ddca45966829584b46945e9bd0883e73d482f7241865bb5cce86c +size 79898 diff --git a/images/Shaft_00557.png b/images/Shaft_00557.png new file mode 100644 index 0000000000000000000000000000000000000000..35070c851189b235cd55e43bac8d6a65f3de875a --- /dev/null +++ b/images/Shaft_00557.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62d8c3635e9f41c9099b923a9870d184282e0163338616b0bf96a5a1e6aec214 +size 74790 diff --git a/images/Shaft_00558.png b/images/Shaft_00558.png new file mode 100644 index 0000000000000000000000000000000000000000..fe522219cb4cfc448d59b8bcae4727da564da723 --- /dev/null +++ b/images/Shaft_00558.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0d827479a8332574bfd9dd5c90c71bc22a921b61b147e01e29aca7ba7f9326e +size 95246 diff --git a/images/Shaft_00559.png b/images/Shaft_00559.png new file mode 100644 index 0000000000000000000000000000000000000000..faeed363e6d29eac1863b8c5dbabf66b7f084804 --- /dev/null +++ b/images/Shaft_00559.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04dae7de62cf2185355cce628ce32c21075f1f1ad232c99b19548af0251929b4 +size 94666 diff --git a/images/Shaft_00560.png b/images/Shaft_00560.png new file mode 100644 index 0000000000000000000000000000000000000000..6d3e6afb3f671128aa12808bfbb8deec43d927ec --- /dev/null +++ b/images/Shaft_00560.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3373faab6d118971866703bef41740536974002adb960770998cc110632b11b7 +size 105396 diff --git a/images/Shaft_00561.png b/images/Shaft_00561.png new file mode 100644 index 0000000000000000000000000000000000000000..dd05a5ae323afca953e377adebafabd0b3c1571f --- /dev/null +++ b/images/Shaft_00561.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b63d819be35066c98c7e745c09b987249e79d10f8407680232a7708b2b32584c +size 71575 diff --git a/images/Shaft_00562.png b/images/Shaft_00562.png new file mode 100644 index 0000000000000000000000000000000000000000..920c3e876da5bdd613e7e1a71af119b08630d111 --- /dev/null +++ b/images/Shaft_00562.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c28500990e38fedcedb64fe616d3cee9be256622120aa6c09bda1b993131567a +size 107904 diff --git a/images/Shaft_00563.png b/images/Shaft_00563.png new file mode 100644 index 0000000000000000000000000000000000000000..92573b6b6b4b840676dab1e9d627e289e9615468 --- /dev/null +++ b/images/Shaft_00563.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:799759713fd9d5f4726ce557449e366a8011f49c1714d67a8f36e641fc5ee21e +size 87386 diff --git a/images/Shaft_00564.png b/images/Shaft_00564.png new file mode 100644 index 0000000000000000000000000000000000000000..380b68bee4f1714916f5281b5ea43f46253f65ce --- /dev/null +++ b/images/Shaft_00564.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f552945303a839fe232861eb2a16b048263248803cde2c7231e3523a74afbdd5 +size 83570 diff --git a/images/Shaft_00565.png b/images/Shaft_00565.png new file mode 100644 index 0000000000000000000000000000000000000000..0c841900843f1f8cf6495d0f282aadfb67ae187e --- /dev/null +++ b/images/Shaft_00565.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a57d7d6384f0601f795a2c3d4f56e9e08d09b051a895f61dd5d4988cb4d486d0 +size 105654 diff --git a/images/Shaft_00566.png b/images/Shaft_00566.png new file mode 100644 index 0000000000000000000000000000000000000000..8d8b9ec02a63fb3862311bc5627c3ce5bdd440bd --- /dev/null +++ b/images/Shaft_00566.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d55670f1dfc3cb6ce6522f2ba71a9c745bd9671663c2aba676f4113ba9677221 +size 98250 diff --git a/images/Shaft_00567.png b/images/Shaft_00567.png new file mode 100644 index 0000000000000000000000000000000000000000..4c99f41ac49c8663c8aafe100824f0b0f321683b --- /dev/null +++ b/images/Shaft_00567.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50b3238fe6c0c0e3e37cca88f56f6a8c248c8b373b1d3391a48497500a996bde +size 73526 diff --git a/images/Shaft_00568.png b/images/Shaft_00568.png new file mode 100644 index 0000000000000000000000000000000000000000..95d5e2b7742267274045c8eb80d5b213f8075092 --- /dev/null +++ b/images/Shaft_00568.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c867ea5f2553ab01f7104c5c9a408803c97fc42011680260d425980bc98f08c +size 85411 diff --git a/images/Shaft_00569.png b/images/Shaft_00569.png new file mode 100644 index 0000000000000000000000000000000000000000..2bd125bff560de7375c659d62e9c5e81fefb50c8 --- /dev/null +++ b/images/Shaft_00569.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:947465aff470c806fef894049a36c4b66959a86f4095bf9024946bfe287e3bec +size 96716 diff --git a/images/Shaft_00570.png b/images/Shaft_00570.png new file mode 100644 index 0000000000000000000000000000000000000000..4a315cbae187795c6b4d21a64da2a37627db4aa5 --- /dev/null +++ b/images/Shaft_00570.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0846400375accf972d983b73f4f5bef94c76c3015e937b2bd31d5b51711dc901 +size 88664 diff --git a/images/Shaft_00571.png b/images/Shaft_00571.png new file mode 100644 index 0000000000000000000000000000000000000000..b5697744d3b3b17bf094b140a1337fc9927cc61b --- /dev/null +++ b/images/Shaft_00571.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baf207d1b686971a01d3ed095cfcd5276d81fe0a969f30e38225121747d8db67 +size 99339 diff --git a/images/Shaft_00572.png b/images/Shaft_00572.png new file mode 100644 index 0000000000000000000000000000000000000000..d26713588470ea25fe69c6b442114db694db730d --- /dev/null +++ b/images/Shaft_00572.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:131be9f2c4a3ca40a89d76aead705cb6bfb6a988769d76e1bfeaf9f43dd805ed +size 80538 diff --git a/images/Shaft_00573.png b/images/Shaft_00573.png new file mode 100644 index 0000000000000000000000000000000000000000..1bff1a8e0c0ea88dda492c64f94133d55b7bf038 --- /dev/null +++ b/images/Shaft_00573.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92db71f578257c96fba2911c3380f53f234a23f1773c5de5fa784838de9eb8c1 +size 83128 diff --git a/images/Shaft_00574.png b/images/Shaft_00574.png new file mode 100644 index 0000000000000000000000000000000000000000..7d7fd7123c03d71540916c06483fa583ada6c2b2 --- /dev/null +++ b/images/Shaft_00574.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5632b4c88dafd5219fccc51e3e0c8c83ea2fd37608b55958dcc2553e6c82b4f +size 104758 diff --git a/images/Shaft_00575.png b/images/Shaft_00575.png new file mode 100644 index 0000000000000000000000000000000000000000..1915300ad34af1d3de8abcf1571cd750b19479f7 --- /dev/null +++ b/images/Shaft_00575.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9220c597ea03067761b18465a0897f75c9eeb627fbe38e35a3771b66ed94aecd +size 99607 diff --git a/images/Shaft_00576.png b/images/Shaft_00576.png new file mode 100644 index 0000000000000000000000000000000000000000..90133477f153ca784fa94fdee287b79610eeae4d --- /dev/null +++ b/images/Shaft_00576.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5ed2d8959e815e23d652ba1427e28ce7f8fafdc770bb01aa93672b40bc9a9cf +size 71013 diff --git a/images/Shaft_00577.png b/images/Shaft_00577.png new file mode 100644 index 0000000000000000000000000000000000000000..6bb23feed7291d1993c3e0f985f5b9a52d22e431 --- /dev/null +++ b/images/Shaft_00577.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3c21a7404f8651a3baca36a0428fcc6841081d42b1c6457d18caa6282a6a7a5 +size 84207 diff --git a/images/Shaft_00578.png b/images/Shaft_00578.png new file mode 100644 index 0000000000000000000000000000000000000000..ecba7b19ebcad4e7b1e7470477d45a164b107331 --- /dev/null +++ b/images/Shaft_00578.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e27555c365dc3de4215e25caee2aa0836c78051e09e60030971a2a328e4d952a +size 93791 diff --git a/images/Shaft_00579.png b/images/Shaft_00579.png new file mode 100644 index 0000000000000000000000000000000000000000..5fc674efecbd603af21290f9ac0a41f85c417b81 --- /dev/null +++ b/images/Shaft_00579.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:885d8d74a966078ab4251f51b446a4e4af225689d4948be22e9f3f04d93d6cf0 +size 75638 diff --git a/images/Shaft_00580.png b/images/Shaft_00580.png new file mode 100644 index 0000000000000000000000000000000000000000..d7e48312d7314fe7c1eae52768416aaafb8d038a --- /dev/null +++ b/images/Shaft_00580.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf6deb46312bc9e87d1a0f136468fd264f94a84738771a9363b22369b75d4784 +size 85117 diff --git a/images/Shaft_00581.png b/images/Shaft_00581.png new file mode 100644 index 0000000000000000000000000000000000000000..e5abe848d78c70cb9836488324d487e9a8d46c86 --- /dev/null +++ b/images/Shaft_00581.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de393689af87e86a9f0383a17bd75a8cba0f479fc5a21c1c810d4ab517e7d125 +size 80715 diff --git a/images/Shaft_00582.png b/images/Shaft_00582.png new file mode 100644 index 0000000000000000000000000000000000000000..f0cce8c7562fc25c224e750730fcf4be6461b35c --- /dev/null +++ b/images/Shaft_00582.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31278231495e0950ac612630e2fbe41e0ac2e7205d045801ea83ea11ecc5aef4 +size 81250 diff --git a/images/Shaft_00583.png b/images/Shaft_00583.png new file mode 100644 index 0000000000000000000000000000000000000000..f4cc906f7a8cf1b6685a722abb1c9a81d0ff3f63 --- /dev/null +++ b/images/Shaft_00583.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ed8e536c322ca65e3e29485e52d82206fa76a8aa31c0c8024e1253e658b1252 +size 112943 diff --git a/images/Shaft_00584.png b/images/Shaft_00584.png new file mode 100644 index 0000000000000000000000000000000000000000..c2f10cc25772eca5b6c054ceed296058f2bb5df0 --- /dev/null +++ b/images/Shaft_00584.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecd0fd237868110a015224608b4213699c7b9239a8e93c64896654c05a07fe93 +size 89406 diff --git a/images/Shaft_00585.png b/images/Shaft_00585.png new file mode 100644 index 0000000000000000000000000000000000000000..8b9288168d78ed43d6cb4b834916aadfd29972e4 --- /dev/null +++ b/images/Shaft_00585.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c3c512dc6c80b05eb66eec93157981bf8f215e9fe18a6671e5a679b474faa9d +size 82972 diff --git a/images/Shaft_00586.png b/images/Shaft_00586.png new file mode 100644 index 0000000000000000000000000000000000000000..988f61180ab5a398d93ac951e6e115fe16ea9dd2 --- /dev/null +++ b/images/Shaft_00586.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a0a1759e011cacc1c9607fa46e500d8998c65e26f1d7e8560c6fec8e72127e1 +size 74890 diff --git a/images/Shaft_00587.png b/images/Shaft_00587.png new file mode 100644 index 0000000000000000000000000000000000000000..354aa0054fc9ff523833d138ca39f2cf779b25e5 --- /dev/null +++ b/images/Shaft_00587.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:036eb333dc92febb6ed291d8539783a4d2aafc3e854ac4e4ab0bd162d8cc9058 +size 107690 diff --git a/images/Shaft_00588.png b/images/Shaft_00588.png new file mode 100644 index 0000000000000000000000000000000000000000..bdacd0d3cbe3beef36b8e7cc0491bf171a3279ea --- /dev/null +++ b/images/Shaft_00588.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:491e56e2d48d070d2167a82cdbab9ff84dbba44c01d435a9a2c882868f80e88c +size 82738 diff --git a/images/Shaft_00589.png b/images/Shaft_00589.png new file mode 100644 index 0000000000000000000000000000000000000000..dc397d02f66882c69aa4be6ded09e1066344797f --- /dev/null +++ b/images/Shaft_00589.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d68a4beaa768652e2cdea7a85e7d5ff9c19374fba66a750c61cf104921741f0a +size 92622 diff --git a/images/Shaft_00590.png b/images/Shaft_00590.png new file mode 100644 index 0000000000000000000000000000000000000000..17d0a2732dc4dec95b90f05b514fd3490626d5e2 --- /dev/null +++ b/images/Shaft_00590.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c545ef8c3873999632f15e5dce33372cf1775e0cb0b2aa83acd20876c83bf8ab +size 92989 diff --git a/images/Shaft_00591.png b/images/Shaft_00591.png new file mode 100644 index 0000000000000000000000000000000000000000..b6287087f07a579b17d45b6de7e5c40a3d5826f2 --- /dev/null +++ b/images/Shaft_00591.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcb511d6c1d869d4d6cadf0363f4a28cddc28ec1d3a1ace5165c882e2ceb8e32 +size 79241 diff --git a/images/Shaft_00592.png b/images/Shaft_00592.png new file mode 100644 index 0000000000000000000000000000000000000000..3d03ec018991f9262c0b4fb7f51695c8ca89023d --- /dev/null +++ b/images/Shaft_00592.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e4a5ca7caccc43680c78e487c73e184962d8a6495c453ebe5b5576aae07bba3 +size 81611 diff --git a/images/Shaft_00593.png b/images/Shaft_00593.png new file mode 100644 index 0000000000000000000000000000000000000000..d01f245648ecf398dc6fc2d23624d86c6c4e1a40 --- /dev/null +++ b/images/Shaft_00593.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9f041d5e275b04a3d8efa5e52c2744f79cffef9da6103ef862a8848f77294be +size 87690 diff --git a/images/Shaft_00594.png b/images/Shaft_00594.png new file mode 100644 index 0000000000000000000000000000000000000000..7b5d336100e7c9a0b88fc6aaa7ff4809ac0a89ae --- /dev/null +++ b/images/Shaft_00594.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba9bbe7c6dcd4c06f882288c999f2dc457309b33a8f82053dced0d811935663f +size 82528 diff --git a/images/Shaft_00595.png b/images/Shaft_00595.png new file mode 100644 index 0000000000000000000000000000000000000000..7f52c7bd81c29fc7f250cbbca966280a7e5e3e35 --- /dev/null +++ b/images/Shaft_00595.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0be9d4e9a89661de80985e59903e38856c5f27282305b60acfdcb34c3bbd245e +size 81116 diff --git a/images/Shaft_00596.png b/images/Shaft_00596.png new file mode 100644 index 0000000000000000000000000000000000000000..49ff571f75c7d2398f2de6f220f6ff450ce1b0de --- /dev/null +++ b/images/Shaft_00596.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a96148309fcf330df5e46e98d9c842af62ed3df1bcb3e6e2d991a8d58aaca7be +size 107123 diff --git a/images/Shaft_00597.png b/images/Shaft_00597.png new file mode 100644 index 0000000000000000000000000000000000000000..01107a5ecaeaaa469dad38ff69289fc778239259 --- /dev/null +++ b/images/Shaft_00597.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e8262860cb0d3f90af0640a354ca26a5425204ba94da29cea4960658f83c600 +size 77343 diff --git a/images/Shaft_00598.png b/images/Shaft_00598.png new file mode 100644 index 0000000000000000000000000000000000000000..c8660b50fab48b4f48c8fd3417a620dd2ec6be16 --- /dev/null +++ b/images/Shaft_00598.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03a460b738e90a451e6ad0b014ebbecd0b85c653bef50235447983476bc31295 +size 96463 diff --git a/images/Shaft_00599.png b/images/Shaft_00599.png new file mode 100644 index 0000000000000000000000000000000000000000..61b0896b8b751f6d5c735a55083f03a0fa4731c9 --- /dev/null +++ b/images/Shaft_00599.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbcbde11038f55f5f24326ca1694fe72c03ff9089e6f5c2a95b02fa97a8e43ac +size 93991 diff --git a/images/Shaft_00600.png b/images/Shaft_00600.png new file mode 100644 index 0000000000000000000000000000000000000000..cb1aaac8f16c181719729f1a60593cd97e3a1aa3 --- /dev/null +++ b/images/Shaft_00600.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48674c7774d112164f336080eec656b6b1ab0568e40b6182818222523f749993 +size 99141 diff --git a/images/Shaft_00601.png b/images/Shaft_00601.png new file mode 100644 index 0000000000000000000000000000000000000000..01bb419f76de5905e0f12ea713e0ad137e809ff6 --- /dev/null +++ b/images/Shaft_00601.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff30fde61cb2a569d64b29345fe1f1bde653a6d91b18430ee4d92429eac0ad38 +size 81363 diff --git a/images/Shaft_00602.png b/images/Shaft_00602.png new file mode 100644 index 0000000000000000000000000000000000000000..86d3c3bcb1c422c86d39c4899edd6fab143c9ac2 --- /dev/null +++ b/images/Shaft_00602.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b70c2f55a1932f3ce6a6ea86edfcb0a603031e1e70353230aa2a8f2e1debbd6d +size 76096 diff --git a/images/Shaft_00603.png b/images/Shaft_00603.png new file mode 100644 index 0000000000000000000000000000000000000000..b0432e253bb3ad6831950e3804704beae46475d1 --- /dev/null +++ b/images/Shaft_00603.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52d464dadd7f5f54e221b61dfe3483bbc0038cba381e56ff36132e5e04adb6f9 +size 92665 diff --git a/images/Shaft_00604.png b/images/Shaft_00604.png new file mode 100644 index 0000000000000000000000000000000000000000..0d24d4a87a2a3d179604a83477e26276439612f5 --- /dev/null +++ b/images/Shaft_00604.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09c45fd5e39f29dcfd9a597c537790659cfcca3580f17fc12e4dadcb13e73c89 +size 115599 diff --git a/images/Shaft_00605.png b/images/Shaft_00605.png new file mode 100644 index 0000000000000000000000000000000000000000..108917d54e9d5d8b44026e7e093175193b1906d0 --- /dev/null +++ b/images/Shaft_00605.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37f050728ab3a192c15cff1e0485019e598168652ec7919c12ae49b2a70a31c4 +size 82096 diff --git a/images/Shaft_00606.png b/images/Shaft_00606.png new file mode 100644 index 0000000000000000000000000000000000000000..1c4f26e3e139ee634bac0fc964d805bff4a4c792 --- /dev/null +++ b/images/Shaft_00606.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66f1a6f2341333ae227112c745d44823df4711e893e6519cc8e9e83bab1d2b14 +size 77005 diff --git a/images/Shaft_00607.png b/images/Shaft_00607.png new file mode 100644 index 0000000000000000000000000000000000000000..3f59b417102c18d747a7504be91a6778165916a5 --- /dev/null +++ b/images/Shaft_00607.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e544fc512cbacc8736530dc280feff297c09554776fdf3709341e0395c1d032 +size 88975 diff --git a/images/Shaft_00608.png b/images/Shaft_00608.png new file mode 100644 index 0000000000000000000000000000000000000000..ef3617a750ae721c8a71abc6a93b6b0affeda6b4 --- /dev/null +++ b/images/Shaft_00608.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16582f7d643f1f2fe2016898c0d706466756837a28dd514da8ba4a36b313f811 +size 98663 diff --git a/images/Shaft_00609.png b/images/Shaft_00609.png new file mode 100644 index 0000000000000000000000000000000000000000..75e220434d3ccc3dc1924195297e804adb3debed --- /dev/null +++ b/images/Shaft_00609.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2d6a58e8e91cba57e05541ddfbd7efd66ca2a4a8ad0cdc0da75aba36ed732ce +size 85360 diff --git a/images/Shaft_00610.png b/images/Shaft_00610.png new file mode 100644 index 0000000000000000000000000000000000000000..3f0d86635ef4637cc3365767ac834cb9f51a6198 --- /dev/null +++ b/images/Shaft_00610.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adc02c38a0b4c3fce8fbec28b412d2f75881ca18e237dc3b36a9e86d9ecf167b +size 74078 diff --git a/images/Shaft_00611.png b/images/Shaft_00611.png new file mode 100644 index 0000000000000000000000000000000000000000..20953abd1cfbe3fc2d7c8fd14dea9a3d4d4d2715 --- /dev/null +++ b/images/Shaft_00611.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00ef83602d39565ea10e574aa101e0aceeda695cb8bd6655fec1a89571bec482 +size 82000 diff --git a/images/Shaft_00612.png b/images/Shaft_00612.png new file mode 100644 index 0000000000000000000000000000000000000000..370bc44ccaf1a383c2e5455edcfd54f461c2dd3a --- /dev/null +++ b/images/Shaft_00612.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:481ab9d4ca955ca0834e6609e3a6c6c75ff19edbe437188a43ac319954d7914a +size 119119 diff --git a/images/Shaft_00613.png b/images/Shaft_00613.png new file mode 100644 index 0000000000000000000000000000000000000000..00fe6e20aa4db1fc7dbe95dd8679c556d9bb5511 --- /dev/null +++ b/images/Shaft_00613.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9784cecd542589316ad7c5ae6bc08a8ee1082cc1c3f6c9d79ccb3fdcc763275f +size 105706 diff --git a/images/Shaft_00614.png b/images/Shaft_00614.png new file mode 100644 index 0000000000000000000000000000000000000000..5acf4dcb282cbf6fa4cba0616030af826b3b6739 --- /dev/null +++ b/images/Shaft_00614.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43cc6f07cf4ce841780db25aa94462a65a6186d29cbe0b3fbee195d84ebe9518 +size 97396 diff --git a/images/Shaft_00615.png b/images/Shaft_00615.png new file mode 100644 index 0000000000000000000000000000000000000000..66cdabdcf4d17b6c65b60a88860b92534f42cada --- /dev/null +++ b/images/Shaft_00615.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d34b26540d0e978bc0e5a90792d81af817c5b91ba620b197a51a3fc2a52323e1 +size 97547 diff --git a/images/Shaft_00616.png b/images/Shaft_00616.png new file mode 100644 index 0000000000000000000000000000000000000000..802f37186f59bd7e58b460717661faef40e80ce3 --- /dev/null +++ b/images/Shaft_00616.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a39e93f55eacc053a93c39356819cbd2c77336dcd807b89ecb564028ada73ee0 +size 68927 diff --git a/images/Shaft_00617.png b/images/Shaft_00617.png new file mode 100644 index 0000000000000000000000000000000000000000..b438e72ddf086db6df8c6b89c9f51ec962e52292 --- /dev/null +++ b/images/Shaft_00617.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b8b5cf9667c0169f611fa3f7f4e3890000ebbe72ea75ca8ae4f595a2873f549 +size 95815 diff --git a/images/Shaft_00618.png b/images/Shaft_00618.png new file mode 100644 index 0000000000000000000000000000000000000000..f7cab1503e6c1f4e904ec670f49437f5dc3e5637 --- /dev/null +++ b/images/Shaft_00618.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50baab1077081fd4cf79b4298919e4e7167ed44de0c3da1cf2fe3961668138cc +size 108679 diff --git a/images/Shaft_00619.png b/images/Shaft_00619.png new file mode 100644 index 0000000000000000000000000000000000000000..060e9c5ff21c2d4905da0a71afcde5f273e326ef --- /dev/null +++ b/images/Shaft_00619.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c237bcc8b9630f876206d26c4eebfc69266e28817449e6e3e9c54b6792643aa8 +size 96736 diff --git a/images/Shaft_00620.png b/images/Shaft_00620.png new file mode 100644 index 0000000000000000000000000000000000000000..a2a6ab37a8ea8c49502f7f1eeb358b6f6255c255 --- /dev/null +++ b/images/Shaft_00620.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af6b4425f4cda0fd3f012752ac805aca8904f6f7f9532d49f3c4afac328a21b1 +size 80060 diff --git a/images/Shaft_00621.png b/images/Shaft_00621.png new file mode 100644 index 0000000000000000000000000000000000000000..f975540a76aad31b3f8005b94b9c4df8b49db253 --- /dev/null +++ b/images/Shaft_00621.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34d9a73c3b4e64565a2b3eeab853c194d6cffe2dc68c64278052c7014b32803d +size 99104 diff --git a/images/Shaft_00622.png b/images/Shaft_00622.png new file mode 100644 index 0000000000000000000000000000000000000000..bb2778432de695e49ec2408e011c098b33f466f8 --- /dev/null +++ b/images/Shaft_00622.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5b5673b766007e19a32b3a66fc9e783422341b9058a79a5698805e42e5d23d8 +size 93971 diff --git a/images/Shaft_00623.png b/images/Shaft_00623.png new file mode 100644 index 0000000000000000000000000000000000000000..5d6021e7f799341c646f553dc5c057656f133f78 --- /dev/null +++ b/images/Shaft_00623.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b5d783715cd453bdd7bd856e4f90b144608fcd3501b3faf7b7857962995c5b4 +size 71213 diff --git a/images/Shaft_00624.png b/images/Shaft_00624.png new file mode 100644 index 0000000000000000000000000000000000000000..15f3fb499b7832e1bb47fafad14877453d100eb8 --- /dev/null +++ b/images/Shaft_00624.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62a51fdf27340f412912fcdf9b992bf26c53ce848119815f5e0b6bb74df6d41b +size 112419 diff --git a/images/Shaft_00625.png b/images/Shaft_00625.png new file mode 100644 index 0000000000000000000000000000000000000000..35fdedc113deea9565dea3a6354030f1f4601108 --- /dev/null +++ b/images/Shaft_00625.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d32e58ced7adfcda6a5ddf1e26a1fc1bef2c48ed5fe4f10895459a4742b82ce +size 76089 diff --git a/images/Shaft_00626.png b/images/Shaft_00626.png new file mode 100644 index 0000000000000000000000000000000000000000..1e88ba9eba766bf7cb881d8e1102c674f7188946 --- /dev/null +++ b/images/Shaft_00626.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39e864ef222b914fb53c18e3bde594e748e21e5b31055c414763dcd3fdd42f3a +size 74966 diff --git a/images/Shaft_00627.png b/images/Shaft_00627.png new file mode 100644 index 0000000000000000000000000000000000000000..4bbaf9e9248a9549747e605f9a27e5f1f812e0f8 --- /dev/null +++ b/images/Shaft_00627.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8437511658d332fcdc9abda2c58be03d86c7eec94b4abb0d5150f9877c376e2b +size 82526 diff --git a/images/Shaft_00628.png b/images/Shaft_00628.png new file mode 100644 index 0000000000000000000000000000000000000000..a146992af9f41a1cc030356c67812979004e78cd --- /dev/null +++ b/images/Shaft_00628.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19952acf9fdfd52e111c0aac1760e5dfcc6f6e194b1c9ee18b9ee1b7fe40bcf1 +size 114792 diff --git a/images/Shaft_00629.png b/images/Shaft_00629.png new file mode 100644 index 0000000000000000000000000000000000000000..02d929c0a9a293da8c69e3c002908f249ff4bac0 --- /dev/null +++ b/images/Shaft_00629.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cd4f8cdb7612b298538b471b75adb241c5bd88d34505fbea6a1f4a5a9a3d854 +size 69712 diff --git a/images/Shaft_00630.png b/images/Shaft_00630.png new file mode 100644 index 0000000000000000000000000000000000000000..988b2633258d416f11d32014c8a055edf10ae565 --- /dev/null +++ b/images/Shaft_00630.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1132a8997a2a915a6f654e55454571d6af753759107ad599351a825897852121 +size 83297 diff --git a/images/Shaft_00631.png b/images/Shaft_00631.png new file mode 100644 index 0000000000000000000000000000000000000000..40f947bfc835646612b86202ae1250560a3ef5d6 --- /dev/null +++ b/images/Shaft_00631.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d0322f554d7b51a94dab91b3c02974f083da334dfdc334a44662dafbf645899 +size 81043 diff --git a/images/Shaft_00632.png b/images/Shaft_00632.png new file mode 100644 index 0000000000000000000000000000000000000000..bd784dc681c4745992aced5765861193a9eeef88 --- /dev/null +++ b/images/Shaft_00632.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04dae422370d0ceec4c3ce3fcda394da9a7e1e3e4486a956d584e41b694bbdf1 +size 76061 diff --git a/images/Shaft_00633.png b/images/Shaft_00633.png new file mode 100644 index 0000000000000000000000000000000000000000..6df0c7bedcc794824e609757e447d42505795936 --- /dev/null +++ b/images/Shaft_00633.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:037cad285a35bf7a8db0380b0c5960c276d1c73e1265f50b4ece86e2274fb120 +size 76743 diff --git a/images/Shaft_00634.png b/images/Shaft_00634.png new file mode 100644 index 0000000000000000000000000000000000000000..23bdb2337d6e1ccfffd7f0371e82286de64115be --- /dev/null +++ b/images/Shaft_00634.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:104f325d9e07b05cd90ecf6d59ac87e2cc556002dd4f6bf372d6ceb4e76bafc5 +size 71308 diff --git a/images/Shaft_00635.png b/images/Shaft_00635.png new file mode 100644 index 0000000000000000000000000000000000000000..9ad7546cb148fa2b16098cc5d948202dbf2fbfa1 --- /dev/null +++ b/images/Shaft_00635.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90a9064e8863a1e85d5525080161572b627960a24b6c528be30515110d690783 +size 101964 diff --git a/images/Shaft_00636.png b/images/Shaft_00636.png new file mode 100644 index 0000000000000000000000000000000000000000..eb809958e0da56b596a35a1c0483e77648cb935d --- /dev/null +++ b/images/Shaft_00636.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dd94987cdf514a2c74c5b24c4c55abb9cd576748a4d2369190d5b97eb709bc0 +size 72570 diff --git a/images/Shaft_00637.png b/images/Shaft_00637.png new file mode 100644 index 0000000000000000000000000000000000000000..0009a34aba015889abb60afc73b102f566075bfb --- /dev/null +++ b/images/Shaft_00637.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b37500e4261c45b8ea88b9639d58041501dba1d455f87d0002a73da1b9eb64c6 +size 76226 diff --git a/images/Shaft_00638.png b/images/Shaft_00638.png new file mode 100644 index 0000000000000000000000000000000000000000..6d7bc68bfa7a32b801245877e4a4b3ab5c01cb9a --- /dev/null +++ b/images/Shaft_00638.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65b7b6207dccf971eb6bca4a4d72fd32ee433333cee8dd2eb026588ee2612895 +size 74679 diff --git a/images/Shaft_00639.png b/images/Shaft_00639.png new file mode 100644 index 0000000000000000000000000000000000000000..603c62c45f998d5a75ffe8e93506bfcaecf7cc80 --- /dev/null +++ b/images/Shaft_00639.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b678c43cede699869e3efd0b03d8d87793d2b796447349618b5db62da8c58c43 +size 72796 diff --git a/images/Shaft_00640.png b/images/Shaft_00640.png new file mode 100644 index 0000000000000000000000000000000000000000..648912899d95a21eeb6f10dd7d08d423df8041b8 --- /dev/null +++ b/images/Shaft_00640.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69131e58e1c26b990609804e26e405d4581633aa1cd914a520d7d76bf1974790 +size 92279 diff --git a/images/Shaft_00641.png b/images/Shaft_00641.png new file mode 100644 index 0000000000000000000000000000000000000000..15952621d03d0f2e4da21a44d0f15eca085ddce2 --- /dev/null +++ b/images/Shaft_00641.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdd971da4957f8e351c34a947265de52da7dc5dca4455943f2c9d4cacc3e641d +size 72490 diff --git a/images/Shaft_00642.png b/images/Shaft_00642.png new file mode 100644 index 0000000000000000000000000000000000000000..cec793207a633b539211c2dbfc37f90a3fb2bb4e --- /dev/null +++ b/images/Shaft_00642.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a16777e586ee184a4d970f7f7f07fbce3c8f8d4ec0cf4ee84bca5c9df495c4d3 +size 80710 diff --git a/images/Shaft_00643.png b/images/Shaft_00643.png new file mode 100644 index 0000000000000000000000000000000000000000..afc9734403b7d621c165c0e8e23e55b5a337d495 --- /dev/null +++ b/images/Shaft_00643.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61f28c1fbc5653f618204a5de67e27ee913fa67c809b4f65c57a4e5ac7ea9240 +size 103367 diff --git a/images/Shaft_00644.png b/images/Shaft_00644.png new file mode 100644 index 0000000000000000000000000000000000000000..dbb8083fc31ae9d515fafbfa463e5d57397b9e8c --- /dev/null +++ b/images/Shaft_00644.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfea5128449a2a2b42ba0ad855a05095cb27fb488e1b68f701c84a2866a54d85 +size 94182 diff --git a/images/Shaft_00645.png b/images/Shaft_00645.png new file mode 100644 index 0000000000000000000000000000000000000000..d31e2129c9f482d66d38ed2987745b2d058af79c --- /dev/null +++ b/images/Shaft_00645.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64315a7a8962cf5e31fae6113944ad686693414e9f878bf39fbaf5a7e39efd63 +size 71442 diff --git a/images/Shaft_00646.png b/images/Shaft_00646.png new file mode 100644 index 0000000000000000000000000000000000000000..68b633f0162c93b55e4c276dbec39c256f1f49dc --- /dev/null +++ b/images/Shaft_00646.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a7a15d6eb56226febeccdd5538ae24e87e68d22a61c7f5b14430b9e44961988 +size 109691 diff --git a/images/Shaft_00647.png b/images/Shaft_00647.png new file mode 100644 index 0000000000000000000000000000000000000000..84379b349e59414a76bf1ccde95fcfb00701d998 --- /dev/null +++ b/images/Shaft_00647.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b4d9b35edfe7c62a94e5740f189209803b89292b846ccc53b73f8f9d62637a7 +size 73202 diff --git a/images/Shaft_00648.png b/images/Shaft_00648.png new file mode 100644 index 0000000000000000000000000000000000000000..1b660fd18c430c63162fb1b0c007aec9d2285da9 --- /dev/null +++ b/images/Shaft_00648.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c225d3954e14841eb4046f501d0bd37687df22c8d1f13c9a8d46bfb16a828260 +size 90575 diff --git a/images/Shaft_00649.png b/images/Shaft_00649.png new file mode 100644 index 0000000000000000000000000000000000000000..e6e90f6a4f131c1555fe67a1e2264a9b30771ecf --- /dev/null +++ b/images/Shaft_00649.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d067cef8c81605b60889360870cffbf54dd972614f68bda3f46f0e8ae1bef93 +size 81524 diff --git a/images/Shaft_00650.png b/images/Shaft_00650.png new file mode 100644 index 0000000000000000000000000000000000000000..fdf3d3f776e432a52abaafef5ad4f8b168cda0b7 --- /dev/null +++ b/images/Shaft_00650.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:830c43d0b9f6f93fef256d637a3f9eb5c7412e33959647b1caf94e398712b12b +size 85093 diff --git a/images/Shaft_00651.png b/images/Shaft_00651.png new file mode 100644 index 0000000000000000000000000000000000000000..35011be9de3ec8d8b8c7ed661bc8a11aa4ca33d5 --- /dev/null +++ b/images/Shaft_00651.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:554b95de718aa530ad768eb1ba780f5b44605658096de2a53e43c3a8bde411e6 +size 72098 diff --git a/images/Shaft_00652.png b/images/Shaft_00652.png new file mode 100644 index 0000000000000000000000000000000000000000..c42403b73c086102226f9a13003902766ca1aae7 --- /dev/null +++ b/images/Shaft_00652.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81bdb2a8f7e007ca8671cd221d1012cd53bf8a671ea5cd264f62e6b1c1139c0f +size 99573 diff --git a/images/Shaft_00653.png b/images/Shaft_00653.png new file mode 100644 index 0000000000000000000000000000000000000000..aae8a816a458b53e6a17e1e12f4972ecbed4fe29 --- /dev/null +++ b/images/Shaft_00653.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9242198e4d37608b8a237f2055cafe577308553ab8d51a3b058092c0618cccb +size 72714 diff --git a/images/Shaft_00654.png b/images/Shaft_00654.png new file mode 100644 index 0000000000000000000000000000000000000000..dfc12784b30bcd2fd989a6b4c6357e3a468294bc --- /dev/null +++ b/images/Shaft_00654.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b67c70d664b616048ca11794a46e0311e329b4deb0717dc4a467b1ad95451a7f +size 74377 diff --git a/images/Shaft_00655.png b/images/Shaft_00655.png new file mode 100644 index 0000000000000000000000000000000000000000..11e4b16bae40885c7acfe2fc95278d81930d6ebb --- /dev/null +++ b/images/Shaft_00655.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b74ab42da03e2c233d71be9ca191dc6391902d14a63edbc043e7942945e1f598 +size 117087 diff --git a/images/Shaft_00656.png b/images/Shaft_00656.png new file mode 100644 index 0000000000000000000000000000000000000000..88d613918a3c3104cb4b49447ed925c40de8ab6e --- /dev/null +++ b/images/Shaft_00656.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5fba034eac38c4ed6d74663a795fc4090f979a96ca77489ebe3c797e68fe7d1 +size 75485 diff --git a/images/Shaft_00657.png b/images/Shaft_00657.png new file mode 100644 index 0000000000000000000000000000000000000000..88c40a617dbd8485606d9258932ec9a60e4f68af --- /dev/null +++ b/images/Shaft_00657.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10deaa0f6683f7222673ec05cf2e3ae1ff56e5b138e2f3b7400d8fd9698c7c30 +size 73547 diff --git a/images/Shaft_00658.png b/images/Shaft_00658.png new file mode 100644 index 0000000000000000000000000000000000000000..db3006ca44345639b35b0285ee9a64d31e77c2c8 --- /dev/null +++ b/images/Shaft_00658.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0ccd3b3ec4709eeea425f96b7ecc881a75b958ab08713e8a1ef6abec704dcdf +size 73144 diff --git a/images/Shaft_00659.png b/images/Shaft_00659.png new file mode 100644 index 0000000000000000000000000000000000000000..13640519e355794c9de0c31580acfa595f1c5cd4 --- /dev/null +++ b/images/Shaft_00659.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d9de924d05c4da05a6982ca98c4fe691b14ef6a9cd3028b3cb13fbe9e833ac5 +size 77590 diff --git a/images/Shaft_00660.png b/images/Shaft_00660.png new file mode 100644 index 0000000000000000000000000000000000000000..c0a2b9160852bf6d7a40fe2d45b98c0dcf479614 --- /dev/null +++ b/images/Shaft_00660.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:201d3c4cd71d1a45c53aa2c20e9662b5431277a380993289f9d867d265c9cca7 +size 93834 diff --git a/images/Shaft_00661.png b/images/Shaft_00661.png new file mode 100644 index 0000000000000000000000000000000000000000..d7ba374e5014c9f3bef7d5f07579e12c0f7845df --- /dev/null +++ b/images/Shaft_00661.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02245f60c5214e678c0147296bed00fb83bfe6c83394bdcfbc5013d37ff476fd +size 109943 diff --git a/images/Shaft_00662.png b/images/Shaft_00662.png new file mode 100644 index 0000000000000000000000000000000000000000..12051af235f41767f0da8a712421caf4ce481a8d --- /dev/null +++ b/images/Shaft_00662.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fd18d54793092132b8f93a05db7f67345847d20e487eac37a481d4e41768859 +size 92035 diff --git a/images/Shaft_00663.png b/images/Shaft_00663.png new file mode 100644 index 0000000000000000000000000000000000000000..32c92319598b058bd0123da54801fda3f8b11032 --- /dev/null +++ b/images/Shaft_00663.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b33c3558de1c2e10d1806385f7236cd4d4b2a9992534b8f189ef72bd009ad824 +size 87958 diff --git a/images/Shaft_00664.png b/images/Shaft_00664.png new file mode 100644 index 0000000000000000000000000000000000000000..4aa0ebf9e26f9978a129ab045d380479f6d670f9 --- /dev/null +++ b/images/Shaft_00664.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b78b7bd0aa176164b2140cc3cc0650df8318b762cd8469a46d4d78bed3795f0 +size 84611 diff --git a/images/Shaft_00665.png b/images/Shaft_00665.png new file mode 100644 index 0000000000000000000000000000000000000000..069741884c6115ad5a94229ad2aa4d26bbb86b84 --- /dev/null +++ b/images/Shaft_00665.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:591fc9e1998be11f78a0fc45dd26aa6fbee74447e86d6f63305432f78f4a68dd +size 80067 diff --git a/images/Shaft_00666.png b/images/Shaft_00666.png new file mode 100644 index 0000000000000000000000000000000000000000..7376cd004727a75bd9230723c3cdae0125111291 --- /dev/null +++ b/images/Shaft_00666.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7719506373cb6e00c5216cc5d3fad8d9fcf668a421eedd19a91dc787149b523b +size 104365 diff --git a/images/Shaft_00667.png b/images/Shaft_00667.png new file mode 100644 index 0000000000000000000000000000000000000000..fd05fb917682fc86d56750e09a39062b5f9575fd --- /dev/null +++ b/images/Shaft_00667.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7323f93b79be3309df4c52d0e3e343a78de6ac4f24cc6cfa3c00421d948fd0df +size 99655 diff --git a/images/Shaft_00668.png b/images/Shaft_00668.png new file mode 100644 index 0000000000000000000000000000000000000000..6307c40a1fdbb545e11438717f7d7ce24edd1ef5 --- /dev/null +++ b/images/Shaft_00668.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45a43ef3d6affe8d7ad6345d55defe620956a87de30167393d3d30f85c9fe6dc +size 73207 diff --git a/images/Shaft_00669.png b/images/Shaft_00669.png new file mode 100644 index 0000000000000000000000000000000000000000..d73c914578af82d1681dad421b1507d666935705 --- /dev/null +++ b/images/Shaft_00669.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e34e4324f8878e28bcd69935ab4df126449939df795a2c3d8edf60c025f5349 +size 90291 diff --git a/images/Shaft_00670.png b/images/Shaft_00670.png new file mode 100644 index 0000000000000000000000000000000000000000..7ac0d3d43273aa949781a399d198c0e183142e01 --- /dev/null +++ b/images/Shaft_00670.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71649a7328950da72d1a13cb4501a57ecab009d9808e63c81c2916435f9eb2bf +size 75133 diff --git a/images/Shaft_00671.png b/images/Shaft_00671.png new file mode 100644 index 0000000000000000000000000000000000000000..2899b7226687680bfa6fd8153ddf92111cb4fbcb --- /dev/null +++ b/images/Shaft_00671.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9c8d31f6006b1458359d4f2d5c33e0df72ce8a221390fbbb602004e240e046d +size 82137 diff --git a/images/Shaft_00672.png b/images/Shaft_00672.png new file mode 100644 index 0000000000000000000000000000000000000000..261b2ab9a68a35ef15c5d483ffc6458709c3b6e0 --- /dev/null +++ b/images/Shaft_00672.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85bd8022916548c3de31758397e08da8693b46f5e0ec0c6e4419bb35141f87c9 +size 79796 diff --git a/images/Shaft_00673.png b/images/Shaft_00673.png new file mode 100644 index 0000000000000000000000000000000000000000..2f0b3f719580a902fab1209dc188dee0f6cbf650 --- /dev/null +++ b/images/Shaft_00673.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e28c56083b95dbffd0aa8ba527b77319a5d3499083a8f46ecd49b6b30b2b300 +size 110004 diff --git a/images/Shaft_00674.png b/images/Shaft_00674.png new file mode 100644 index 0000000000000000000000000000000000000000..014dd5ba65bb148ae044212e1de4dec9d3f819d5 --- /dev/null +++ b/images/Shaft_00674.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:710a28cdd52237a9392b3ff79ab3904cbc6861c986b8ce395be1b005569c8339 +size 85810 diff --git a/images/Shaft_00675.png b/images/Shaft_00675.png new file mode 100644 index 0000000000000000000000000000000000000000..a5dbe16d62c0bf593816e74c9424c8945712e128 --- /dev/null +++ b/images/Shaft_00675.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b96dec7c6a734a198958be52c17185daceb5d7dbf5b4665f482b084b464e3bfb +size 80735 diff --git a/images/Shaft_00676.png b/images/Shaft_00676.png new file mode 100644 index 0000000000000000000000000000000000000000..090fd9b6aad03891ae9fccba660c94333d1ef78a --- /dev/null +++ b/images/Shaft_00676.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7d6b348d77ee23bfc7937791a1869db1094e4cb07f136065565fbfb02314651 +size 94471 diff --git a/images/Shaft_00677.png b/images/Shaft_00677.png new file mode 100644 index 0000000000000000000000000000000000000000..098aa2ba2a08240de331227a92d0f1326f217fd9 --- /dev/null +++ b/images/Shaft_00677.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f6cc43de9f4f71d670fe8e18682f5d2621a988e091559ab489f2953eb29452d +size 69331 diff --git a/images/Shaft_00678.png b/images/Shaft_00678.png new file mode 100644 index 0000000000000000000000000000000000000000..738de2167961be674f38b4d739a0af3593145cbb --- /dev/null +++ b/images/Shaft_00678.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1403cb5cdde8fe07dae9493006f1eacdc9aa24da6f65ba7b5078f2d2ecd50401 +size 95968 diff --git a/images/Shaft_00679.png b/images/Shaft_00679.png new file mode 100644 index 0000000000000000000000000000000000000000..e715600b70d984c7aeb8d5fdd0e9a55cdc53adcf --- /dev/null +++ b/images/Shaft_00679.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16b73618573ba9970baa0773fde0f6181e92d5c5acb0f768a61057475fc4af64 +size 79816 diff --git a/images/Shaft_00680.png b/images/Shaft_00680.png new file mode 100644 index 0000000000000000000000000000000000000000..5ce5583233518e0cd243a762282def15c0466e6f --- /dev/null +++ b/images/Shaft_00680.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b004166d62cd729de95681812ef85cb05caf85477b19862081bc3391389acfab +size 107012 diff --git a/images/Shaft_00681.png b/images/Shaft_00681.png new file mode 100644 index 0000000000000000000000000000000000000000..b5b873e9883818bf357e0f98351f595f6a217404 --- /dev/null +++ b/images/Shaft_00681.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d3c7200a56e020fb648d2bca7e09a9f6f678afa886f8ecb3a01e72cc96ea949 +size 117697 diff --git a/images/Shaft_00682.png b/images/Shaft_00682.png new file mode 100644 index 0000000000000000000000000000000000000000..c5107b0d940bb439923a69bfd263969f34d9daa4 --- /dev/null +++ b/images/Shaft_00682.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e54759aa91bd06456a609abfcad9e98a4c0bd0eb264e168f27fe89f2f2100c72 +size 74083 diff --git a/images/Shaft_00683.png b/images/Shaft_00683.png new file mode 100644 index 0000000000000000000000000000000000000000..6ed7d29f8cbd2474e61a801e43f5de3e38481e69 --- /dev/null +++ b/images/Shaft_00683.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:beb9473887b77b02ed06469101cbec0b6a47b80c2b94d8b4d020fd3e603307f2 +size 71459 diff --git a/images/Shaft_00684.png b/images/Shaft_00684.png new file mode 100644 index 0000000000000000000000000000000000000000..4411b24087522c6dd5010ad017d1157ad2c7617e --- /dev/null +++ b/images/Shaft_00684.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9180f2d059af2f078fb577dcdca11ac82acfdba10095fdd9c130ea0221989687 +size 89954 diff --git a/images/Shaft_00685.png b/images/Shaft_00685.png new file mode 100644 index 0000000000000000000000000000000000000000..1c14705a0bc7d26eb3f1719ec53a1c1a0f6ed5e1 --- /dev/null +++ b/images/Shaft_00685.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:950c2f27ce4c517a8346296bfd8bf4f6f04bffbd42aebe8325167668e6b54e16 +size 104982 diff --git a/images/Shaft_00686.png b/images/Shaft_00686.png new file mode 100644 index 0000000000000000000000000000000000000000..cb25656a43686bec550cec0fdbadc10f6a690aaf --- /dev/null +++ b/images/Shaft_00686.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62dbfcac97f2d6928683be2a7d1a3431de4f7279dc1d7dd29a5a86f9f58188c1 +size 73290 diff --git a/images/Shaft_00687.png b/images/Shaft_00687.png new file mode 100644 index 0000000000000000000000000000000000000000..9011c03441c03002af7205eebc7765437234b460 --- /dev/null +++ b/images/Shaft_00687.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a944ada411f3fbb1cf0d1259c71e5094b2e04642f2081e63d145f8bac478684 +size 97704 diff --git a/images/Shaft_00688.png b/images/Shaft_00688.png new file mode 100644 index 0000000000000000000000000000000000000000..9e9ab56ebc400a7344b05f7ba0e9196b0ea39694 --- /dev/null +++ b/images/Shaft_00688.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c4eec4b395c67b00d3699fc67dfa316772bd737bbe5456b0b67e029fd7b217a +size 83236 diff --git a/images/Shaft_00689.png b/images/Shaft_00689.png new file mode 100644 index 0000000000000000000000000000000000000000..1c4441cc2ddcdb803beb3dd5f816cc172bc1eda9 --- /dev/null +++ b/images/Shaft_00689.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df609b039072b1f52af2fd405cd6e673570d7df6cd0b6bf535e184441a379eff +size 93607 diff --git a/images/Shaft_00690.png b/images/Shaft_00690.png new file mode 100644 index 0000000000000000000000000000000000000000..eceed2bb75f08206eca1656fa9731387c0b78374 --- /dev/null +++ b/images/Shaft_00690.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6dd0c181918f511c35b5d8f6a375ecb1c4c933b9928fa2540b751a2598833dc +size 76286 diff --git a/images/Shaft_00691.png b/images/Shaft_00691.png new file mode 100644 index 0000000000000000000000000000000000000000..8a331078ab50ffe2f7e7c637ac99bee5a09c65e6 --- /dev/null +++ b/images/Shaft_00691.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1c151bcbb454625bfbca8efb4e8f328e9167e818741142758577c40bac562cc +size 70899 diff --git a/images/Shaft_00692.png b/images/Shaft_00692.png new file mode 100644 index 0000000000000000000000000000000000000000..14692a331a4c529656f40bb9a2e010a154b1f033 --- /dev/null +++ b/images/Shaft_00692.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d10088af0108199d653529c3216ea52c98609fa5b456b4bfb762643409000e7 +size 103396 diff --git a/images/Shaft_00693.png b/images/Shaft_00693.png new file mode 100644 index 0000000000000000000000000000000000000000..7e3894c14a1bb918c8573e7f3b0a48b23ded394b --- /dev/null +++ b/images/Shaft_00693.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:743a27deb46fa23d7aa3e3ab4193d90030333bdb5e072dd8dde4b1247cb30cae +size 72079 diff --git a/images/Shaft_00694.png b/images/Shaft_00694.png new file mode 100644 index 0000000000000000000000000000000000000000..50cf31b249155cdc676ee0741a81daf4a31861d6 --- /dev/null +++ b/images/Shaft_00694.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:129c21df9da2315a45c26a20c177e33c981fa230319c94434ed3a6aefc596450 +size 91209 diff --git a/images/Shaft_00695.png b/images/Shaft_00695.png new file mode 100644 index 0000000000000000000000000000000000000000..500649f92350321b0d3b4c627f71b2ceb78b22b0 --- /dev/null +++ b/images/Shaft_00695.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42ff20b31c49b31a6ee1ab3090c95844dea3b99ecd2f81b08ec82b290fdc1b0c +size 70842 diff --git a/images/Shaft_00696.png b/images/Shaft_00696.png new file mode 100644 index 0000000000000000000000000000000000000000..a0a7ee2537d8f9ea11f9fdaaec25a350510c125a --- /dev/null +++ b/images/Shaft_00696.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3d4200cea3ed66fc410b5c951ab7421cb3bdde0a8d5a472da5e9255062d2db3 +size 92468 diff --git a/images/Shaft_00697.png b/images/Shaft_00697.png new file mode 100644 index 0000000000000000000000000000000000000000..532e2956b620b31d939dbb444b90e39be0c02394 --- /dev/null +++ b/images/Shaft_00697.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56730da688051fef9cc2690226c030dc44813c45f6cd675b431f0efa884a16d2 +size 95098 diff --git a/images/Shaft_00698.png b/images/Shaft_00698.png new file mode 100644 index 0000000000000000000000000000000000000000..ccba1247700360fe2302fcea7d8a5f1df2a371a0 --- /dev/null +++ b/images/Shaft_00698.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a77d245304e722ea2beb3f789524f08861e85955b5d92a3f540fc7c0cbc771bf +size 97572 diff --git a/images/Shaft_00699.png b/images/Shaft_00699.png new file mode 100644 index 0000000000000000000000000000000000000000..56d7bb2c9b12f23193be7f90028c748621ca4696 --- /dev/null +++ b/images/Shaft_00699.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26239a555261851d28180137e385f9c0638a6954c0b767139b26059b94bd89b4 +size 105313 diff --git a/images/Shaft_00700.png b/images/Shaft_00700.png new file mode 100644 index 0000000000000000000000000000000000000000..b2d2764ed392c298a80e16685a234ce5c994000c --- /dev/null +++ b/images/Shaft_00700.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2608ebeff133c83aa5f3c371bffae5ff48fa62b6424eae9ffb84c93db8d19d37 +size 106394 diff --git a/images/Shaft_00701.png b/images/Shaft_00701.png new file mode 100644 index 0000000000000000000000000000000000000000..e16f142d466e7fd205316fa78fca572bb287ebb7 --- /dev/null +++ b/images/Shaft_00701.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:caf943fcde5e8afda18a80c131b77a65d9266960202650f664fd7d4df26378e1 +size 78062 diff --git a/images/Shaft_00702.png b/images/Shaft_00702.png new file mode 100644 index 0000000000000000000000000000000000000000..47167c2911369ef326de5c404248474ea05c40e5 --- /dev/null +++ b/images/Shaft_00702.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73e673251419d9f951e98669ae679ecf8269375615990582aa9270576eb6a738 +size 79935 diff --git a/images/Shaft_00703.png b/images/Shaft_00703.png new file mode 100644 index 0000000000000000000000000000000000000000..6c5ad623a396460d7891481e1d744387c8dc909d --- /dev/null +++ b/images/Shaft_00703.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfe4a5ed94253b46ad15d3cda1eae8aa03b545e215c29b0dee09f03118ca4ca8 +size 71835 diff --git a/images/Shaft_00704.png b/images/Shaft_00704.png new file mode 100644 index 0000000000000000000000000000000000000000..a832e0803c73b802b86b1b0270b44b40755208e1 --- /dev/null +++ b/images/Shaft_00704.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9586b1f1edb1a34dafe316034f2a9c051d9ad332e850be5cde3f1d4796747921 +size 76996 diff --git a/images/Shaft_00705.png b/images/Shaft_00705.png new file mode 100644 index 0000000000000000000000000000000000000000..a2ae0936fe5fa7cdea61d1861a7c2a5088fcb338 --- /dev/null +++ b/images/Shaft_00705.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73c29d925d5a062eafe513b1c81bbb8588f0a7bd095701d85b288ab1fe8d1c29 +size 100514 diff --git a/images/Shaft_00706.png b/images/Shaft_00706.png new file mode 100644 index 0000000000000000000000000000000000000000..7ce954f95ae0b05414a97f553282a6f2e13b8434 --- /dev/null +++ b/images/Shaft_00706.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc99eb31d8f5f34e7a6e08212816abf8c3fdd806580781d9b989a175ba944d1b +size 91462 diff --git a/images/Shaft_00707.png b/images/Shaft_00707.png new file mode 100644 index 0000000000000000000000000000000000000000..b5e6d00a8994d278044de83df9da1100c4ce0e75 --- /dev/null +++ b/images/Shaft_00707.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:739ee86d6ba71e0fd5c29a4bb14b1b37a67ff164e4c79f1fb48878aac18c6e45 +size 95618 diff --git a/images/Shaft_00708.png b/images/Shaft_00708.png new file mode 100644 index 0000000000000000000000000000000000000000..b2b8003cfb1d258965a68604f8d929c5aa4397e8 --- /dev/null +++ b/images/Shaft_00708.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07abb91335f2f68a9a13843665e8a9151020cb93447d453d05e4c47f90b19036 +size 85594 diff --git a/images/Shaft_00709.png b/images/Shaft_00709.png new file mode 100644 index 0000000000000000000000000000000000000000..8008d379b7f4da848ed0a18c8627dd77ce8a67b5 --- /dev/null +++ b/images/Shaft_00709.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd57ac91c99f93f5488d1eef69150e412f41710c2bba6139f8e902817f6bd1bf +size 98608 diff --git a/images/Shaft_00710.png b/images/Shaft_00710.png new file mode 100644 index 0000000000000000000000000000000000000000..066618d5797dcab3be509206e79ad5f258fd4825 --- /dev/null +++ b/images/Shaft_00710.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60addf5cbf0defe787fdc6e29b6bec771bc16c6359c1fab56cdc0f080133abbc +size 91818 diff --git a/images/Shaft_00711.png b/images/Shaft_00711.png new file mode 100644 index 0000000000000000000000000000000000000000..79d48ecb05e3f4ec2b0fcb274b4446e462ac65d5 --- /dev/null +++ b/images/Shaft_00711.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc6b2d94dd5e0bb03ee168b3a2443c14391f046ae80d968124316bbf63a55be8 +size 72393 diff --git a/images/Shaft_00712.png b/images/Shaft_00712.png new file mode 100644 index 0000000000000000000000000000000000000000..e49fa79c63e5a54b2cbb9a504a2887f14a87f44b --- /dev/null +++ b/images/Shaft_00712.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75ab3800691b83d46c1720490dbd12e48e6dbbe87432c16e82da125985e5a62c +size 71117 diff --git a/images/Shaft_00713.png b/images/Shaft_00713.png new file mode 100644 index 0000000000000000000000000000000000000000..42339c5a5d4bfe97ca53cde35f0049d54287a115 --- /dev/null +++ b/images/Shaft_00713.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f82f57d49254cedda4288d0d1638feab5fc042d19d28267420ddef6dad7dbd35 +size 88305 diff --git a/images/Shaft_00714.png b/images/Shaft_00714.png new file mode 100644 index 0000000000000000000000000000000000000000..442d1bdfa23a5be1f57fce3deffa09febeea1167 --- /dev/null +++ b/images/Shaft_00714.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13e3d79dce52264900bf9efbaa2f1225cb65fdf8b904f814fecdf2b19ee0a599 +size 72187 diff --git a/images/Shaft_00715.png b/images/Shaft_00715.png new file mode 100644 index 0000000000000000000000000000000000000000..78746904fc55143c6147605ca53b4d1d89d17bee --- /dev/null +++ b/images/Shaft_00715.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28e62592253abce9d879e23fc350a629f31d08e4fc26046af131b53924dde97e +size 88152 diff --git a/images/Shaft_00716.png b/images/Shaft_00716.png new file mode 100644 index 0000000000000000000000000000000000000000..2f25d412af881c776ea44a4ca77ab9845a7260c7 --- /dev/null +++ b/images/Shaft_00716.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f85dc5c9181a314941da63ce41653486118343256d28588d02905ca53cb1536c +size 80360 diff --git a/images/Shaft_00717.png b/images/Shaft_00717.png new file mode 100644 index 0000000000000000000000000000000000000000..9fae80eb96fe0dc674ddaded72a00dc5fc3110ec --- /dev/null +++ b/images/Shaft_00717.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ffeb425704168ed9a51740f6d11ec9ec580fa6c18eaa8a2a0170b24aa0d84d2 +size 101119 diff --git a/images/Shaft_00718.png b/images/Shaft_00718.png new file mode 100644 index 0000000000000000000000000000000000000000..5077383b7a8a772941575aecbfc2568463a6dbf2 --- /dev/null +++ b/images/Shaft_00718.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b95a5fcf4c67a3115452db71e3d184ae3f1704b96d5fea9a1626a742b24840d +size 78152 diff --git a/images/Shaft_00719.png b/images/Shaft_00719.png new file mode 100644 index 0000000000000000000000000000000000000000..79d13a2e022ea9fa7afeb57b5ba8e29a773f9ec8 --- /dev/null +++ b/images/Shaft_00719.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a1d631879655ce8915d81d57ab2565aa7c778e47807fade5c708d2999677217 +size 87019 diff --git a/images/Shaft_00720.png b/images/Shaft_00720.png new file mode 100644 index 0000000000000000000000000000000000000000..b3edb5f67a4db6eea3316b4d604847de4b65a17c --- /dev/null +++ b/images/Shaft_00720.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf3e8dc7c10b94e5ce0dcdac18b0ee03952e96c023af7d88986267452d1bd122 +size 92409 diff --git a/images/Shaft_00721.png b/images/Shaft_00721.png new file mode 100644 index 0000000000000000000000000000000000000000..ad62daa87ecdddbe9596d178c81f24eabee52a19 --- /dev/null +++ b/images/Shaft_00721.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af584b3c859fc08d6606947100f5c58c1aab13ab2f1679c4c5bd6fb2dcd1610d +size 68892 diff --git a/images/Shaft_00722.png b/images/Shaft_00722.png new file mode 100644 index 0000000000000000000000000000000000000000..c805dcad37a56ba75843f2774edf7b1779d2e9c3 --- /dev/null +++ b/images/Shaft_00722.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:745007f591942f74905085e2c91e853a4ae05241b46f5ba2f391003b46ec591c +size 93477 diff --git a/images/Shaft_00723.png b/images/Shaft_00723.png new file mode 100644 index 0000000000000000000000000000000000000000..7d046ae7eea06e505ee50d2d200413cb134c076b --- /dev/null +++ b/images/Shaft_00723.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db6e67e8430de8e85dcbf297b2b084e493220442a80f8f3c4108dccb9d81890c +size 92257 diff --git a/images/Shaft_00724.png b/images/Shaft_00724.png new file mode 100644 index 0000000000000000000000000000000000000000..2b551519035fdf2d5e5855c3843d169781c91bb3 --- /dev/null +++ b/images/Shaft_00724.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e24ef3d73e566bff9b9a3c0b24b8d14b31aacbf0dd6e59973f873606f7adeb4a +size 82692 diff --git a/images/Shaft_00725.png b/images/Shaft_00725.png new file mode 100644 index 0000000000000000000000000000000000000000..855f4281748c59c44340b6bb9261daa47875b095 --- /dev/null +++ b/images/Shaft_00725.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5697cfe565bafc2084df43366341b7df17551a7756bbf548a7dafff7b0d7bd5 +size 92615 diff --git a/images/Shaft_00726.png b/images/Shaft_00726.png new file mode 100644 index 0000000000000000000000000000000000000000..46473c3d3bd6c710cd3874e192c9d801d4146f5b --- /dev/null +++ b/images/Shaft_00726.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b5567dd74336514dd3b8424e1d1689d6d7d52f67f827a3d239cdb4ef9bed03e +size 79641 diff --git a/images/Shaft_00727.png b/images/Shaft_00727.png new file mode 100644 index 0000000000000000000000000000000000000000..6aaa35bd77e04f3bb6e66fb4147176920e0c3284 --- /dev/null +++ b/images/Shaft_00727.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8cc172c0c7512644bec648094d0219e92160185132a90a4b19f313f64ae4c04 +size 79963 diff --git a/images/Shaft_00728.png b/images/Shaft_00728.png new file mode 100644 index 0000000000000000000000000000000000000000..195f3e707323178838521f9cf6885bf70bc657a5 --- /dev/null +++ b/images/Shaft_00728.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74b6de04778edb042fa40aa97d90a4a59205e2c8482d8c5575a64fcbb05eadca +size 90869 diff --git a/images/Shaft_00729.png b/images/Shaft_00729.png new file mode 100644 index 0000000000000000000000000000000000000000..35d7bae9bd506efafc21928eb3dc78cbcde64036 --- /dev/null +++ b/images/Shaft_00729.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8105bee68ba8bb8e5999211949f86067c587ebbf0614a0775f23fa04d4f2c0fa +size 79509 diff --git a/images/Shaft_00730.png b/images/Shaft_00730.png new file mode 100644 index 0000000000000000000000000000000000000000..e0c091d6dcae52852fb3c54cc84d6e2733631b7b --- /dev/null +++ b/images/Shaft_00730.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48f583d4ebcb9d11f8fdd3d29a28d7bcbd70f89218d0c7d333dd623e8286a3e5 +size 99118 diff --git a/images/Shaft_00731.png b/images/Shaft_00731.png new file mode 100644 index 0000000000000000000000000000000000000000..f94f5b53ebbd17f31e67166e89743d5f270c0ccd --- /dev/null +++ b/images/Shaft_00731.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:704b4aad96108a0fd184f4f74e4223040b1b5df5528f3a345d947e8430fe8779 +size 71194 diff --git a/images/Shaft_00732.png b/images/Shaft_00732.png new file mode 100644 index 0000000000000000000000000000000000000000..1999bb40bfa6602d4582c29ab8028a3476e2d2f9 --- /dev/null +++ b/images/Shaft_00732.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7164ebd5ba5841e04d3ce4751048b88d89864c04fc0fcfee157b7093420e3ace +size 101881 diff --git a/images/Shaft_00733.png b/images/Shaft_00733.png new file mode 100644 index 0000000000000000000000000000000000000000..2d40370b890b44c4dc1be1de6accc0a977ff835f --- /dev/null +++ b/images/Shaft_00733.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a9db9c1cb83004116aa4346357c7d6dea10b2a73576dc7a04971d5e77f78f81 +size 104604 diff --git a/images/Shaft_00734.png b/images/Shaft_00734.png new file mode 100644 index 0000000000000000000000000000000000000000..0c84d71e2de0401f8f073a57fc93e0bc2d6fab36 --- /dev/null +++ b/images/Shaft_00734.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94f510e64c59d972de44a9db5a2dd9d6bed64a603ae50e589b6afc57ac6af4a1 +size 79116 diff --git a/images/Shaft_00735.png b/images/Shaft_00735.png new file mode 100644 index 0000000000000000000000000000000000000000..b4f798eed3feeab8f841e4c26157ce61667e3453 --- /dev/null +++ b/images/Shaft_00735.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2edd50fe05aacf16a70aaf0c262aed592f4603d7b99631398ed3ab4d96935826 +size 86385 diff --git a/images/Shaft_00736.png b/images/Shaft_00736.png new file mode 100644 index 0000000000000000000000000000000000000000..2965313e02df4d1c8a33147fc00742f3cd9e8829 --- /dev/null +++ b/images/Shaft_00736.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a96f64ec66248eec069981c93d329fc772cf81f202b8af28b5c898093fe1452d +size 109132 diff --git a/images/Shaft_00737.png b/images/Shaft_00737.png new file mode 100644 index 0000000000000000000000000000000000000000..b1383015263c2028995a20238b48e75458007629 --- /dev/null +++ b/images/Shaft_00737.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1e67e7639778b508609434eb852a30c0568bd7dfcb43de7534aa976889320a8 +size 67863 diff --git a/images/Shaft_00738.png b/images/Shaft_00738.png new file mode 100644 index 0000000000000000000000000000000000000000..48a8482948723b612acbf64912bc756363122bae --- /dev/null +++ b/images/Shaft_00738.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f2dd9154e6da1a9c9ec83124bb8c6dbc75ad3077dd1454c26beb816242dbfc5 +size 71733 diff --git a/images/Shaft_00739.png b/images/Shaft_00739.png new file mode 100644 index 0000000000000000000000000000000000000000..f66aaeb24351397611771cb909eb76ae92d3096d --- /dev/null +++ b/images/Shaft_00739.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec5bb5bf9719ed52f64cc91f3cee3b29bc3229e5480e467ada7957adb4704abe +size 77062 diff --git a/images/Shaft_00740.png b/images/Shaft_00740.png new file mode 100644 index 0000000000000000000000000000000000000000..2203e1db405c8027f7090f9f1587c0f212d156e6 --- /dev/null +++ b/images/Shaft_00740.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17247dac055041421f77d20f830c464a11d5dc0b4ec902214366fdee1ae012d1 +size 71823 diff --git a/images/Shaft_00741.png b/images/Shaft_00741.png new file mode 100644 index 0000000000000000000000000000000000000000..e408754ec63bc757c20734b5683c7475766f48b4 --- /dev/null +++ b/images/Shaft_00741.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:616ce9b2dd7014779ecbc265aaa23eb47e9db70d38bb95cb411c947ecf0a8337 +size 70972 diff --git a/images/Shaft_00742.png b/images/Shaft_00742.png new file mode 100644 index 0000000000000000000000000000000000000000..649b3c214ed7140e5886d12ab7e6d5dc272f1154 --- /dev/null +++ b/images/Shaft_00742.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f974c708c2a13114a12a3504eb5cf297bd7b11011592b533192525c98c4f75e +size 88525 diff --git a/images/Shaft_00743.png b/images/Shaft_00743.png new file mode 100644 index 0000000000000000000000000000000000000000..552d25879f219b851bd2b627d53d7f21d1d19657 --- /dev/null +++ b/images/Shaft_00743.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07aceb9b1e8d6963d24007970dced41b639425dc55498993e1f1cfaa0fb06b9c +size 69340 diff --git a/images/Shaft_00744.png b/images/Shaft_00744.png new file mode 100644 index 0000000000000000000000000000000000000000..0abba2cd7ccac071575c9d81ec04d6ef71ae7b74 --- /dev/null +++ b/images/Shaft_00744.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:246ab8174430c63508d72d2ea711e27d1196909f18524992e5da41e5312290db +size 90978 diff --git a/images/Shaft_00745.png b/images/Shaft_00745.png new file mode 100644 index 0000000000000000000000000000000000000000..f7dc5cc1b384d98a909f30962b6c09a7586269de --- /dev/null +++ b/images/Shaft_00745.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4248beb79eec5ba7dc173bfcd7ca3e8a39538becaadfe6ece59fcea2763dbba +size 90563 diff --git a/images/Shaft_00746.png b/images/Shaft_00746.png new file mode 100644 index 0000000000000000000000000000000000000000..b95cfc344db11aaf21fe44847725ce402352b02b --- /dev/null +++ b/images/Shaft_00746.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06549f2687b83319cd0bd6470aeaf0003ce751a3c2e60e43e1c2d6629ed19cc9 +size 78665 diff --git a/images/Shaft_00747.png b/images/Shaft_00747.png new file mode 100644 index 0000000000000000000000000000000000000000..be315bd60afd0e6cef0b8cb3bdb6b67500b00495 --- /dev/null +++ b/images/Shaft_00747.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92857a12dd9526dae895f6b8567e5455972286fd109ab4fd66816437547d4c00 +size 97624 diff --git a/images/Shaft_00748.png b/images/Shaft_00748.png new file mode 100644 index 0000000000000000000000000000000000000000..666aec908722497225afe2f07c1111a5756e69a5 --- /dev/null +++ b/images/Shaft_00748.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a965e601ce0e9df676e9194dd729c34a48ce44e1ba4324119b64090d57cc6ecd +size 73909 diff --git a/images/Shaft_00749.png b/images/Shaft_00749.png new file mode 100644 index 0000000000000000000000000000000000000000..17f9b3aae802571d17caf914cb11fe75578b8041 --- /dev/null +++ b/images/Shaft_00749.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28c24ed4e308cc8ce674d9246f9ccc2d66c5387bb3c00820753ef87554889e22 +size 78276 diff --git a/images/Shaft_00750.png b/images/Shaft_00750.png new file mode 100644 index 0000000000000000000000000000000000000000..56ad09745d49c281f531b4c60f8532d9fc780c64 --- /dev/null +++ b/images/Shaft_00750.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edd28f1f0585d71b9c757c27be6c398f5115d47950f1b1897f65ccd3cc8efe49 +size 87808 diff --git a/images/Shaft_00751.png b/images/Shaft_00751.png new file mode 100644 index 0000000000000000000000000000000000000000..c3ebf28bb9099ddc0c16436091f9dd9287e8da8a --- /dev/null +++ b/images/Shaft_00751.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22fe86e4685e177669e5ece291eaa87ae7f5b5000a9698271eba2349351c8cac +size 69593 diff --git a/images/Shaft_00752.png b/images/Shaft_00752.png new file mode 100644 index 0000000000000000000000000000000000000000..89dd9edd97bbbd6502efe6ceb08fc95a462bd45d --- /dev/null +++ b/images/Shaft_00752.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af1dc14f78074aa34d5942a9c9c304168100da25fe65f99aa2e8022720c9c70b +size 82525 diff --git a/images/Shaft_00753.png b/images/Shaft_00753.png new file mode 100644 index 0000000000000000000000000000000000000000..44c5c666e2a35a793b6d2ec620aeb458fba571b9 --- /dev/null +++ b/images/Shaft_00753.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:419d43d3dae7cf5d56d33d55e331d78debc36837151f3750faa18704579b5acd +size 88755 diff --git a/images/Shaft_00754.png b/images/Shaft_00754.png new file mode 100644 index 0000000000000000000000000000000000000000..862b1fed3a6e8d1f49ffd5e43c4363de48b0ab51 --- /dev/null +++ b/images/Shaft_00754.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e0aec8f42ac6dee39940be2e9c43f3ead575c6270667aa2866be321d9e73fbe +size 66246 diff --git a/images/Shaft_00755.png b/images/Shaft_00755.png new file mode 100644 index 0000000000000000000000000000000000000000..655c7b73a819a4638e81e4a84b577702c0b97611 --- /dev/null +++ b/images/Shaft_00755.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a09d38d9e6d5995e6c59f4df5a4b076fb32acbbf031b182e3e91ecfae78386d9 +size 74093 diff --git a/images/Shaft_00756.png b/images/Shaft_00756.png new file mode 100644 index 0000000000000000000000000000000000000000..916a338b449b891a40c99610d961de6ccce633d9 --- /dev/null +++ b/images/Shaft_00756.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:957f7f5a6f4d4ca42b1e573e1da1e8d1190632517b1b13537cb3797d448d2e57 +size 87518 diff --git a/images/Shaft_00757.png b/images/Shaft_00757.png new file mode 100644 index 0000000000000000000000000000000000000000..47046095d29fbf9a46d7aefb773ece9e7479e570 --- /dev/null +++ b/images/Shaft_00757.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7869f0ac1274a8bbfbed4c67d06bebcd1094c58c6d8b847d9f7a3f922b0a5716 +size 105665 diff --git a/images/Shaft_00758.png b/images/Shaft_00758.png new file mode 100644 index 0000000000000000000000000000000000000000..7971461fe017fb982c0c1992632e4285a830cf38 --- /dev/null +++ b/images/Shaft_00758.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:353bb276457b7d052eb3308fceba0147c45bc115e30ab15f3af63554bb916ac0 +size 103629 diff --git a/images/Shaft_00759.png b/images/Shaft_00759.png new file mode 100644 index 0000000000000000000000000000000000000000..0605008692c4031118b300d5ce384b43e28f7cf8 --- /dev/null +++ b/images/Shaft_00759.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2cdb494296ee5e0927f160cf75c639ec3a8f840c038ec1258c2674ae6a1dff2 +size 70921 diff --git a/images/Shaft_00760.png b/images/Shaft_00760.png new file mode 100644 index 0000000000000000000000000000000000000000..b7a3971f99eb81dc948a0f652eceaf7b58812bb9 --- /dev/null +++ b/images/Shaft_00760.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:224390339380bdd814a85f8ea669a27c9a0093651d209117c220042549b250e3 +size 71859 diff --git a/images/Shaft_00761.png b/images/Shaft_00761.png new file mode 100644 index 0000000000000000000000000000000000000000..49339388f96f66a519823cecfd9bc6d600989a89 --- /dev/null +++ b/images/Shaft_00761.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8303efe0ba447f6ff72f8aff80388b2bc6cb0dcc83ddaab4f5d09486687e3081 +size 75515 diff --git a/images/Shaft_00762.png b/images/Shaft_00762.png new file mode 100644 index 0000000000000000000000000000000000000000..f47c6b33653a2d7d41253f151fca05bed7cb1e8f --- /dev/null +++ b/images/Shaft_00762.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d90237d58777e22095d3dea5eaa0ef7e80fc6f8d9180b9169bff342a7588da1f +size 99522 diff --git a/images/Shaft_00763.png b/images/Shaft_00763.png new file mode 100644 index 0000000000000000000000000000000000000000..fca5abbc801c627f28a6d108ff6c7d44c8ea71df --- /dev/null +++ b/images/Shaft_00763.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2109dbf003e009ee28189936cfd238d5140ed29383c2759033d140f613a21da +size 96669 diff --git a/images/Shaft_00764.png b/images/Shaft_00764.png new file mode 100644 index 0000000000000000000000000000000000000000..aacd04898a061ce9f94451c5e81c48f26dce7c63 --- /dev/null +++ b/images/Shaft_00764.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e88d020fbf150c86eda5a92c416c6543375b26eff60939d709d189a78fa06219 +size 79509 diff --git a/images/Shaft_00765.png b/images/Shaft_00765.png new file mode 100644 index 0000000000000000000000000000000000000000..c9cb1a2349fdc710aacba0a8c4b221683beb0c5f --- /dev/null +++ b/images/Shaft_00765.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f675b580315b38e6cffd04341cf36b46651bd4c47cdecf1bc15c315f340b56c2 +size 68076 diff --git a/images/Shaft_00766.png b/images/Shaft_00766.png new file mode 100644 index 0000000000000000000000000000000000000000..4b9162c5d51ee5a77a96ce777132175b62b2ba10 --- /dev/null +++ b/images/Shaft_00766.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:489eae9b4a101aecdcbae62b891886cbba760d42a35f22f6aaaf1f7238bc4771 +size 97271 diff --git a/images/Shaft_00767.png b/images/Shaft_00767.png new file mode 100644 index 0000000000000000000000000000000000000000..0e3d70c809cf159f46e901cc734e6f23c3320ede --- /dev/null +++ b/images/Shaft_00767.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46eb25d09182da4b8795a66d41c21f471521aa49f9e1df3914bc43c63aa4ee50 +size 70864 diff --git a/images/Shaft_00768.png b/images/Shaft_00768.png new file mode 100644 index 0000000000000000000000000000000000000000..e550c0d46184e4e5b298b441eac62d3a08665eb9 --- /dev/null +++ b/images/Shaft_00768.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20779de18852052f96838052dafd98e955098fb9d774c42d991187e2208afcd6 +size 100933 diff --git a/images/Shaft_00769.png b/images/Shaft_00769.png new file mode 100644 index 0000000000000000000000000000000000000000..7b652ea3af2eb8e19625b28b5b977b39c65f237f --- /dev/null +++ b/images/Shaft_00769.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88fb71cc2bdb2694fa19b45e83bce233a550c11b2d9cdd868997885711a76c1c +size 84444 diff --git a/images/Shaft_00770.png b/images/Shaft_00770.png new file mode 100644 index 0000000000000000000000000000000000000000..35c73f9ef7b6bda605348addeca6222d63393da6 --- /dev/null +++ b/images/Shaft_00770.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbccb2ecc29dd724087d7003b9e5585ebac9233927e2b8c5b8873a872ef71a36 +size 96509 diff --git a/images/Shaft_00771.png b/images/Shaft_00771.png new file mode 100644 index 0000000000000000000000000000000000000000..3965c967a829d54a06aede5fdfaa8ce1d2faedc3 --- /dev/null +++ b/images/Shaft_00771.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53882bd73892316180937b06b190b2ec50ffa6e047a453f0c1043c62315006b3 +size 77067 diff --git a/images/Shaft_00772.png b/images/Shaft_00772.png new file mode 100644 index 0000000000000000000000000000000000000000..a473398d50a37d13bbf36d17b9a59962d8632a3e --- /dev/null +++ b/images/Shaft_00772.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29d947e22948cae66e09c60f04cbd4d93df2744b4b18207fa0705d5b0b50a49b +size 76637 diff --git a/images/Shaft_00773.png b/images/Shaft_00773.png new file mode 100644 index 0000000000000000000000000000000000000000..81ae43f897b7a8823326b4686d9e31bdb599530f --- /dev/null +++ b/images/Shaft_00773.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37f27c8bb2b11a33e374f7087549e11e670a127148c5f30b2c381a6763b8dd95 +size 84721 diff --git a/images/Shaft_00774.png b/images/Shaft_00774.png new file mode 100644 index 0000000000000000000000000000000000000000..cb8c05ef6b07ca9ee65461ae32f18c7b3f267b52 --- /dev/null +++ b/images/Shaft_00774.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09b48b204e080771868eda1250715a2fb515bdf7a11d2584b6cd23986414cae7 +size 79609 diff --git a/images/Shaft_00775.png b/images/Shaft_00775.png new file mode 100644 index 0000000000000000000000000000000000000000..0647623fc982bc538102df5d85d657419c371e55 --- /dev/null +++ b/images/Shaft_00775.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2013d718563ab836e9e912a2bbe6a305adfbb0d3d30330be290d09f1335a83d +size 113274 diff --git a/images/Shaft_00776.png b/images/Shaft_00776.png new file mode 100644 index 0000000000000000000000000000000000000000..71a2d234e98bea6d17a95723820960c1b858fc41 --- /dev/null +++ b/images/Shaft_00776.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63493281fc706b3430e6d2d980e2e90097ba22defe0ae213cbb49f3cc7143c15 +size 73836 diff --git a/images/Shaft_00777.png b/images/Shaft_00777.png new file mode 100644 index 0000000000000000000000000000000000000000..e80a47206367f7770a97ffda96db5e088b387da9 --- /dev/null +++ b/images/Shaft_00777.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc42be263979f4e98ca3950d20440c8785f6fec6090e3533b5fb1a4ae347b41d +size 91842 diff --git a/images/Shaft_00778.png b/images/Shaft_00778.png new file mode 100644 index 0000000000000000000000000000000000000000..068d17f84a86072b3bf2d405f0767928ffb8256c --- /dev/null +++ b/images/Shaft_00778.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd1038d8299f951f5e3e88b2e38c9d19254622102c48934bc2826d61b7532c9e +size 94796 diff --git a/images/Shaft_00779.png b/images/Shaft_00779.png new file mode 100644 index 0000000000000000000000000000000000000000..55cf551777439eda3140044ae76573b3fa702b8e --- /dev/null +++ b/images/Shaft_00779.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b028ae3e3e8bd3a51d1440d715946020f3011fd8561d2d14e1789b37268ce9e5 +size 92592 diff --git a/images/Shaft_00780.png b/images/Shaft_00780.png new file mode 100644 index 0000000000000000000000000000000000000000..18aef7675f093d1586dc4651db71580d6107c9d2 --- /dev/null +++ b/images/Shaft_00780.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aa5a51e6bacfca2b91e56591ec98a82bbeb67605a22f4b8df167d5479f39ed1 +size 108810 diff --git a/images/Shaft_00781.png b/images/Shaft_00781.png new file mode 100644 index 0000000000000000000000000000000000000000..729ced2eec89e3f1ee9014aa8b137af45cf1075d --- /dev/null +++ b/images/Shaft_00781.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a4460104f2b55b35038daf9b1f254c75e6b8c6cf3b87f1cddc4dec4dfdf39dd +size 84045 diff --git a/images/Shaft_00782.png b/images/Shaft_00782.png new file mode 100644 index 0000000000000000000000000000000000000000..abf39d73bb160d48140ac45ba798d75f71e37238 --- /dev/null +++ b/images/Shaft_00782.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b50fa80f164bc373374e192f9b149a2e6ec6cbaa740d155bb67fbb70e1f5cda1 +size 82763 diff --git a/images/Shaft_00783.png b/images/Shaft_00783.png new file mode 100644 index 0000000000000000000000000000000000000000..91876969a11f89ac3b623c2921c179431167a3b7 --- /dev/null +++ b/images/Shaft_00783.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2354760bf2bdd04f41bb6df95734f3fb0ae38c590b73dce5abf5612c60553a42 +size 103175 diff --git a/images/Shaft_00784.png b/images/Shaft_00784.png new file mode 100644 index 0000000000000000000000000000000000000000..085c503a6f9eb1bc76a1f295dbffc90f6b3f5d56 --- /dev/null +++ b/images/Shaft_00784.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d0f3cd7dcc3fb8c545aee8f647f149f4a93e7dae4bad5f5cff0520b9643cf22 +size 121429 diff --git a/images/Shaft_00785.png b/images/Shaft_00785.png new file mode 100644 index 0000000000000000000000000000000000000000..3f1e3df83e7d6375eef00d9cb127d474a7b5928f --- /dev/null +++ b/images/Shaft_00785.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aed73d264d618085b5382cc056e4727b938f023b515a17a9a77b77ecd0e91046 +size 94118 diff --git a/images/Shaft_00786.png b/images/Shaft_00786.png new file mode 100644 index 0000000000000000000000000000000000000000..d453784aa56e4f36cf1f966f9f1c4fc4d06bee36 --- /dev/null +++ b/images/Shaft_00786.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cce1b511989a53ea6e0cb5ea6eeeb1ce09bb0228ef9d4e20b203c8d305ac481c +size 75755 diff --git a/images/Shaft_00787.png b/images/Shaft_00787.png new file mode 100644 index 0000000000000000000000000000000000000000..9c820788a29c89dbc37f14ee3d3de586d331869a --- /dev/null +++ b/images/Shaft_00787.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:197b22f61d4c465e2fdda6f97c31bda41a466fab2b6b75ee333be5c2bf235621 +size 84127 diff --git a/images/Shaft_00788.png b/images/Shaft_00788.png new file mode 100644 index 0000000000000000000000000000000000000000..760dce635f0f62b1fec42bfc3845d0a897391ab3 --- /dev/null +++ b/images/Shaft_00788.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63d09a31966433a68d0af484c8048d9e55b78557c029edcd2ec41a9043228854 +size 93558 diff --git a/images/Shaft_00789.png b/images/Shaft_00789.png new file mode 100644 index 0000000000000000000000000000000000000000..fc89a02f100763b723a2f0d4d671b8094047d62a --- /dev/null +++ b/images/Shaft_00789.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0cd3d73d2cecd0217ac771705a17efad4815ab2bb7f9e2f37ee31a9c2bf2215 +size 93651 diff --git a/images/Shaft_00790.png b/images/Shaft_00790.png new file mode 100644 index 0000000000000000000000000000000000000000..a17864e428f3217a7c96b38f39777e35325391d0 --- /dev/null +++ b/images/Shaft_00790.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95cb02d4ed76b3d8c9323b382fd9b4f6881c65e84b340d4c2519642b8bca246f +size 78904 diff --git a/images/Shaft_00791.png b/images/Shaft_00791.png new file mode 100644 index 0000000000000000000000000000000000000000..e9cd9fbeb7b478d86a247b7eb0f3287bf0ac0652 --- /dev/null +++ b/images/Shaft_00791.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14242506e76337c82c285b9a420affec11535fb1020c9ba7fcc48e76559f8b00 +size 106606 diff --git a/images/Shaft_00792.png b/images/Shaft_00792.png new file mode 100644 index 0000000000000000000000000000000000000000..403ab5e6d9f356357c2923e901708c7e90543389 --- /dev/null +++ b/images/Shaft_00792.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb78dae9bc84e97e7baed21dc6e887a068ca57ebdcbbecb6b994641b7a36702c +size 84558 diff --git a/images/Shaft_00793.png b/images/Shaft_00793.png new file mode 100644 index 0000000000000000000000000000000000000000..2b86fed32a8e032b4dc8f06fcef350cc4799caa6 --- /dev/null +++ b/images/Shaft_00793.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2d2743fc0c2f1e1847ebe5ea422bcc23cf0882ab62698040cd7708827d2c8d9 +size 106034 diff --git a/images/Shaft_00794.png b/images/Shaft_00794.png new file mode 100644 index 0000000000000000000000000000000000000000..06d31b893c8254ae7a7c0fc4e1cb1a26c9ffa228 --- /dev/null +++ b/images/Shaft_00794.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2fbdc95a20a4ee7edf9de9711f0132716a2f2661cd46a67a01a52c35a6bfc04e +size 72270 diff --git a/images/Shaft_00795.png b/images/Shaft_00795.png new file mode 100644 index 0000000000000000000000000000000000000000..306e5f76878eac66ddd729ef0a30238147c81b0c --- /dev/null +++ b/images/Shaft_00795.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f0d324bfc8b785e94a6ec9fcf7d1fde08f7eee01fda75aa17a3c89f3bf718e9 +size 94479 diff --git a/images/Shaft_00796.png b/images/Shaft_00796.png new file mode 100644 index 0000000000000000000000000000000000000000..ca39531f4f5cf9daa83e9d44037c09896b114c3f --- /dev/null +++ b/images/Shaft_00796.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dac1f9a22fff022edef09825555aa634d5aabdef5dc630c0e6041a82828a7349 +size 84698 diff --git a/images/Shaft_00797.png b/images/Shaft_00797.png new file mode 100644 index 0000000000000000000000000000000000000000..b018ef9521305dadcfa73f22a229622b368b714f --- /dev/null +++ b/images/Shaft_00797.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69f08486c29a770e18e9d69f31a1e20f42cd65521c3c75c3dc449cd0720946bd +size 85960 diff --git a/images/Shaft_00798.png b/images/Shaft_00798.png new file mode 100644 index 0000000000000000000000000000000000000000..62386f0180c27f8232d1380c76944735bd715325 --- /dev/null +++ b/images/Shaft_00798.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee6ae90b420f8604f222658c0800a9c6b6b6b22e1d4bd2791bd04e86122f637a +size 71402 diff --git a/images/Shaft_00799.png b/images/Shaft_00799.png new file mode 100644 index 0000000000000000000000000000000000000000..cb24076315df38a04891b8094bec857afc7c3aa6 --- /dev/null +++ b/images/Shaft_00799.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c0db2d09c94db65adb9827f248f08faf0371edf62cfbb10895263f144fe2109 +size 86491 diff --git a/images/Shaft_00800.png b/images/Shaft_00800.png new file mode 100644 index 0000000000000000000000000000000000000000..0c72ba6fb8a2bfe8b10e36e24b8e97220e9d1166 --- /dev/null +++ b/images/Shaft_00800.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:affedd4b92a9f5a4a7c1609df18ba8ccb412440d54a1ba58ebf9a52ba9169a57 +size 68333 diff --git a/images/Shaft_00801.png b/images/Shaft_00801.png new file mode 100644 index 0000000000000000000000000000000000000000..3373976e6086250e526913e06abba8595a812390 --- /dev/null +++ b/images/Shaft_00801.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a1a681536d860cc0cedc5e753f5bf54e7de1d255c4c5287fcd4a14db9064919 +size 86218 diff --git a/images/Shaft_00802.png b/images/Shaft_00802.png new file mode 100644 index 0000000000000000000000000000000000000000..66eb08fd332baf6067fbe3790d4f10bd5d710105 --- /dev/null +++ b/images/Shaft_00802.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6497388a0019a36da1fd96207534d2dd258840e376da26174730154588b951a7 +size 83679 diff --git a/images/Shaft_00803.png b/images/Shaft_00803.png new file mode 100644 index 0000000000000000000000000000000000000000..b832115082c59531aa9983c715124ab4664527c2 --- /dev/null +++ b/images/Shaft_00803.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e10f088c5425f2c5e7a00e7e91fd47ebeb85a44809c16b8c2e70fc52c30f6ba3 +size 87285 diff --git a/images/Shaft_00804.png b/images/Shaft_00804.png new file mode 100644 index 0000000000000000000000000000000000000000..93ce5ceb5233a50b5f9c10dd59d15f73529f972e --- /dev/null +++ b/images/Shaft_00804.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4151ab7e71eb3b34287d3a715ded47e83940f497eb5250affc173fd114a84cfc +size 77493 diff --git a/images/Shaft_00805.png b/images/Shaft_00805.png new file mode 100644 index 0000000000000000000000000000000000000000..79797d541df7c2b7f7db21a13eda9bd2312cc5ce --- /dev/null +++ b/images/Shaft_00805.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7c4f77d3ee9d084b229deb2fe81ec14bda9f53b8e5be08de1af2c0f2617700c +size 81578 diff --git a/images/Shaft_00806.png b/images/Shaft_00806.png new file mode 100644 index 0000000000000000000000000000000000000000..1ba62d1c3f6d65fc3c0a2be4f0279f46098fb629 --- /dev/null +++ b/images/Shaft_00806.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f21267f41128f06b8724cc84fd815ac62628f6923229a2d10c20837e61850ccc +size 93426 diff --git a/images/Shaft_00807.png b/images/Shaft_00807.png new file mode 100644 index 0000000000000000000000000000000000000000..0b2c01a21b3e041b24c7509cadba6345c2ab8b8a --- /dev/null +++ b/images/Shaft_00807.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77605f625bc5db6146f26ceb5f340541f7a2066a462a581cc936666cf1e786cd +size 100720 diff --git a/images/Shaft_00808.png b/images/Shaft_00808.png new file mode 100644 index 0000000000000000000000000000000000000000..151722107bd209fba9caeab63e0dd96743f9fd53 --- /dev/null +++ b/images/Shaft_00808.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97eb6fb16a5b271141368fd30091da59f81a534d0efe42c4231500e1fc441c5b +size 87038 diff --git a/images/Shaft_00809.png b/images/Shaft_00809.png new file mode 100644 index 0000000000000000000000000000000000000000..175403b360c276e5757fded39ab56a0ca0423ca1 --- /dev/null +++ b/images/Shaft_00809.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b82250a078aa481f4972f0309fa529020ae061c430933b76350b4085eb64152 +size 86897 diff --git a/images/Shaft_00810.png b/images/Shaft_00810.png new file mode 100644 index 0000000000000000000000000000000000000000..dbcc221d11a7cd4a9e2593932e860feadc58b414 --- /dev/null +++ b/images/Shaft_00810.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc7485a2452177e7ae89494cce686dec4aebaf6e5b80622a2c7c2fa8a2591006 +size 82268 diff --git a/images/Shaft_00811.png b/images/Shaft_00811.png new file mode 100644 index 0000000000000000000000000000000000000000..bb9714707f742cd380d52eea3ee27d49091cd0ad --- /dev/null +++ b/images/Shaft_00811.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce9784389a05bdec89d2dacf0da471fced593ca585839ee7afb6825d3a88cae2 +size 72152 diff --git a/images/Shaft_00812.png b/images/Shaft_00812.png new file mode 100644 index 0000000000000000000000000000000000000000..987837327d406abceb3180adb6a9abcb1dd6d8ae --- /dev/null +++ b/images/Shaft_00812.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae59dd622c1f2a2c5419445fbb242662093949253b8b3f54e071a906adf42f4f +size 106621 diff --git a/images/Shaft_00813.png b/images/Shaft_00813.png new file mode 100644 index 0000000000000000000000000000000000000000..6c1cafabe622b7371013dedec05c312608805cd0 --- /dev/null +++ b/images/Shaft_00813.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e615ce2379834d17ff9f7e4dd5d420bfa93c1c6731cc9ef434fac99fd1f225d7 +size 75980 diff --git a/images/Shaft_00814.png b/images/Shaft_00814.png new file mode 100644 index 0000000000000000000000000000000000000000..bb251167eed0ff1c3ab76aad390115fbf4e4c167 --- /dev/null +++ b/images/Shaft_00814.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b5a66eda2780c0b0814b99e4adada40ecc8b7d525f19bd06dd857b90ccee443 +size 70572 diff --git a/images/Shaft_00815.png b/images/Shaft_00815.png new file mode 100644 index 0000000000000000000000000000000000000000..2d5c47413a7a1696e4c934e59783a61195e0cfc1 --- /dev/null +++ b/images/Shaft_00815.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6b33b5d9c27f8acfbb0675333f03997fb14173307f235fc126567428a60d297 +size 98951 diff --git a/images/Shaft_00816.png b/images/Shaft_00816.png new file mode 100644 index 0000000000000000000000000000000000000000..b995a64a14ce930c715a0dd397dde4dea85e1056 --- /dev/null +++ b/images/Shaft_00816.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48ef829e34112b3f0094fc2dd46a3a36c60434eb233b3f15ef5076a23938c4eb +size 87674 diff --git a/images/Shaft_00817.png b/images/Shaft_00817.png new file mode 100644 index 0000000000000000000000000000000000000000..3f29ca8293f4e067b7de19e36d9cb82b150041ef --- /dev/null +++ b/images/Shaft_00817.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af16af7cd8d84f53608897b94cc7019499e92143251a433573a96797362f3f53 +size 82704 diff --git a/images/Shaft_00818.png b/images/Shaft_00818.png new file mode 100644 index 0000000000000000000000000000000000000000..2990c278a1a47c91866a2806e712c947ad8c0240 --- /dev/null +++ b/images/Shaft_00818.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:489e4da321b6ad6193ed834b217c98275d1ef07590f29863bc8da70c6b3e99a4 +size 82383 diff --git a/images/Shaft_00819.png b/images/Shaft_00819.png new file mode 100644 index 0000000000000000000000000000000000000000..ec88b03c56c6bbc0e48ca31ef7ff3a489476709a --- /dev/null +++ b/images/Shaft_00819.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eea5ebb380994d7ca2e7d93b8d32ff2990df6075357c5101a8f26c52f08b4ced +size 98046 diff --git a/images/Shaft_00820.png b/images/Shaft_00820.png new file mode 100644 index 0000000000000000000000000000000000000000..96d543bf713d9afe2f061eb827eb221a70b66bce --- /dev/null +++ b/images/Shaft_00820.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2f2e5e9b1d77f17700f7ba4dcf7f34d1d0c5cd1dc41242aa75d49e022d57342 +size 102851 diff --git a/images/Shaft_00821.png b/images/Shaft_00821.png new file mode 100644 index 0000000000000000000000000000000000000000..e8cf6f91c410ebbb03240319746e9f64e5f80010 --- /dev/null +++ b/images/Shaft_00821.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f02b3d4b6b27a4bafb809cd9e9902309caaf3b8ac817bc82b3160a461d36dec6 +size 99445 diff --git a/images/Shaft_00822.png b/images/Shaft_00822.png new file mode 100644 index 0000000000000000000000000000000000000000..534422dc68618a9fe7a552d873e530b518ff6487 --- /dev/null +++ b/images/Shaft_00822.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2ce75f7df2dfdfd11db337522c74464b1e966582ac916db90df496494887081 +size 94828 diff --git a/images/Shaft_00823.png b/images/Shaft_00823.png new file mode 100644 index 0000000000000000000000000000000000000000..7da0f38b88b0d08fa383868dea59feabf175e933 --- /dev/null +++ b/images/Shaft_00823.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:845418f7b442ca8db0e848e8bc1556b15685aba97481527f4f70bbd4d1b4623b +size 78476 diff --git a/images/Shaft_00824.png b/images/Shaft_00824.png new file mode 100644 index 0000000000000000000000000000000000000000..668646136effe416bd62052a94ee40e20d25ae47 --- /dev/null +++ b/images/Shaft_00824.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cc568d40e63fadea7043b16916bf0a350f68497bc6d93e0fe061f3c0771238a +size 102310 diff --git a/images/Shaft_00825.png b/images/Shaft_00825.png new file mode 100644 index 0000000000000000000000000000000000000000..0516b6e81227e85a28a51dc31fb605a36d13e187 --- /dev/null +++ b/images/Shaft_00825.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4413f1cfc5b30bc24d6dc73cc38a4caa769bf7a9fdf6be906bcf2c4fc5c4c94c +size 100245 diff --git a/images/Shaft_00826.png b/images/Shaft_00826.png new file mode 100644 index 0000000000000000000000000000000000000000..6d518d4f404817853f356099d5403aeb474d6c90 --- /dev/null +++ b/images/Shaft_00826.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f56a2d24ad925e5c5e2d0150324612a11432f80842d9ff07a913ac0aaff8bdf8 +size 71595 diff --git a/images/Shaft_00827.png b/images/Shaft_00827.png new file mode 100644 index 0000000000000000000000000000000000000000..49599be5d3da804ffa0aa42f97e2e9298341573f --- /dev/null +++ b/images/Shaft_00827.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3550c84d3d4c4b09b549e569b9aeafc37db7a298b95fc5a47ebdf3a12f7797b7 +size 73285 diff --git a/images/Shaft_00828.png b/images/Shaft_00828.png new file mode 100644 index 0000000000000000000000000000000000000000..7a9b32bbc384104e45dda1246ba9987e97fc7a62 --- /dev/null +++ b/images/Shaft_00828.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0703c3cbedb4bd075a3cd61bf252ccbe9ddf65356edf2298493d9061a06e282d +size 90643 diff --git a/images/Shaft_00829.png b/images/Shaft_00829.png new file mode 100644 index 0000000000000000000000000000000000000000..c5a6720904bdc922564ebbae92228114c9a42856 --- /dev/null +++ b/images/Shaft_00829.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8a2a394c012c9471479f50880bdeec9cb52eafe8527e308b9e03c1de46c25dd +size 83986 diff --git a/images/Shaft_00830.png b/images/Shaft_00830.png new file mode 100644 index 0000000000000000000000000000000000000000..eefd71df4b2f1b6ff42620ed3c68c37ea15825a7 --- /dev/null +++ b/images/Shaft_00830.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ae57ac930ed2fe5bc3f129d6d55164984a3161a5315f6430803ca4ad94731d5 +size 86468 diff --git a/images/Shaft_00831.png b/images/Shaft_00831.png new file mode 100644 index 0000000000000000000000000000000000000000..4aaa9dca269b16ad33ddbf5233943b9a82c6e0eb --- /dev/null +++ b/images/Shaft_00831.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6676972843138a290c9c4a535b8d683f97a94fa0c27e7aca6a6b4e42a242459 +size 93898 diff --git a/images/Shaft_00832.png b/images/Shaft_00832.png new file mode 100644 index 0000000000000000000000000000000000000000..24852efadabdae4bb8385ab85a51c41e7fdfb798 --- /dev/null +++ b/images/Shaft_00832.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf74bbbe1a2cf35c80cadf81efaedafca0dae674667b0af83908fd00bef2b8dc +size 72812 diff --git a/images/Shaft_00833.png b/images/Shaft_00833.png new file mode 100644 index 0000000000000000000000000000000000000000..6e56d021b8f9ff73cf4b4a768f33b381a47cdc30 --- /dev/null +++ b/images/Shaft_00833.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d34668422d3255dc0f76179c604ce42d59ce19a89a5db72fd4fd42056157325 +size 71385 diff --git a/images/Shaft_00834.png b/images/Shaft_00834.png new file mode 100644 index 0000000000000000000000000000000000000000..0d02bbcf70dbfebc94dbba594c3da00e0d16388d --- /dev/null +++ b/images/Shaft_00834.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4118b6c04d4ec9b215fede70eb27eef574cdf9116b2a725ed3aa4f2a51061b03 +size 74954 diff --git a/images/Shaft_00835.png b/images/Shaft_00835.png new file mode 100644 index 0000000000000000000000000000000000000000..84514744d0e34cca5061f344ec339d7253883b4e --- /dev/null +++ b/images/Shaft_00835.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eaff1acc62659f175d6ea3be04ea399289fa4ea09b060d229f134329a1eb4c70 +size 90560 diff --git a/images/Shaft_00836.png b/images/Shaft_00836.png new file mode 100644 index 0000000000000000000000000000000000000000..4571fff56250dd4273f3ca27fc3d69717cbce881 --- /dev/null +++ b/images/Shaft_00836.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:065dec5f150c792ea94cdcc606e3bde1ec9fc7f22b6d426cdf92cc41cb7ebb2a +size 74315 diff --git a/images/Shaft_00837.png b/images/Shaft_00837.png new file mode 100644 index 0000000000000000000000000000000000000000..46bdf86df2a5c17399a6412dfb092915725f9aa5 --- /dev/null +++ b/images/Shaft_00837.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b607f78a991d16fee4c72cce6c1e5bab48740fd207ed551ba5ffdc86d3f0321f +size 97282 diff --git a/images/Shaft_00838.png b/images/Shaft_00838.png new file mode 100644 index 0000000000000000000000000000000000000000..0d4ac92d11c4aac43da15614fb14bb77dd834b05 --- /dev/null +++ b/images/Shaft_00838.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52973a17ed2b196a28713a5ac2d522d6f6017f855c5797a4e4b5477c5cd8e8bc +size 72780 diff --git a/images/Shaft_00839.png b/images/Shaft_00839.png new file mode 100644 index 0000000000000000000000000000000000000000..3888bf6db7d775400db12f1bcb8e75ee6019ce03 --- /dev/null +++ b/images/Shaft_00839.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ea0719764ffc6e4e7c71d9d4444bc65ea2791594ab90795f3e580ed5fafcf64 +size 74381 diff --git a/images/Shaft_00840.png b/images/Shaft_00840.png new file mode 100644 index 0000000000000000000000000000000000000000..e5984e1f355c9d3ed8286c58bdeef0c9f4685da6 --- /dev/null +++ b/images/Shaft_00840.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce3f210cb470b98f2b5e09a0d0bdfb40f2821f649b32ef506e70779ae70d3830 +size 112262 diff --git a/images/Shaft_00841.png b/images/Shaft_00841.png new file mode 100644 index 0000000000000000000000000000000000000000..4f425d43a8593f68f80d0cbff23e3ae87251f32e --- /dev/null +++ b/images/Shaft_00841.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d515dae3e970d796b1ffe8a93701b3dfa6ef871e348766397ab6f366291d260 +size 102398 diff --git a/images/Shaft_00842.png b/images/Shaft_00842.png new file mode 100644 index 0000000000000000000000000000000000000000..da81683d62d74627ef71c0ad0fcc0fc1b6663f4e --- /dev/null +++ b/images/Shaft_00842.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40074eb79a1efa879bcefaf336c0217d32af99dc44bf30fe071cfbb3080cf1c2 +size 97251 diff --git a/images/Shaft_00843.png b/images/Shaft_00843.png new file mode 100644 index 0000000000000000000000000000000000000000..feeb26398cd2c03399cbc103c09b07aeb05dd60b --- /dev/null +++ b/images/Shaft_00843.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49faa46cfe3e73459eab1c1c1304a13430b0b677d905d767c0c0ad0b9435ed0a +size 72940 diff --git a/images/Shaft_00844.png b/images/Shaft_00844.png new file mode 100644 index 0000000000000000000000000000000000000000..af50e6071c633bd45710a1263c1847a83cb4ca22 --- /dev/null +++ b/images/Shaft_00844.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdba7a3f57bf5aa994e5ac0909e6bc9f5236e5ef52810365c56849f96886a38c +size 76325 diff --git a/images/Shaft_00845.png b/images/Shaft_00845.png new file mode 100644 index 0000000000000000000000000000000000000000..a796a44afcb8f34004fefd73b382571452cb33da --- /dev/null +++ b/images/Shaft_00845.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fd62de3852e3848a8ee0a8c33f7e2c8c9a162acc4b68cb5c79bbf10224dfb26 +size 80678 diff --git a/images/Shaft_00846.png b/images/Shaft_00846.png new file mode 100644 index 0000000000000000000000000000000000000000..02d8ae33bb6de8fc7f637d4612d085cbd0e5724d --- /dev/null +++ b/images/Shaft_00846.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96a6fa077b228f9d28db2cd6cc4645d0fc458ca0665bbe2cd1a947ab5a6ab784 +size 72932 diff --git a/images/Shaft_00847.png b/images/Shaft_00847.png new file mode 100644 index 0000000000000000000000000000000000000000..0b09660143191dcaca6e573f23ee16d8a651bfb2 --- /dev/null +++ b/images/Shaft_00847.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19aa06fbd0ac049e9df5eaa365fab942a43c418db6a872ced999b98d68aff346 +size 96878 diff --git a/images/Shaft_00848.png b/images/Shaft_00848.png new file mode 100644 index 0000000000000000000000000000000000000000..ee9d2bfe9743986cfb935cb13f81d7f494d5b280 --- /dev/null +++ b/images/Shaft_00848.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43e257e8f374488a52ed83cf2d69952afcb1d487be1a52a4d948c1ca428b83d6 +size 106080 diff --git a/images/Shaft_00849.png b/images/Shaft_00849.png new file mode 100644 index 0000000000000000000000000000000000000000..a04f2a727d5753bfc674ea4e2501adf992262b6d --- /dev/null +++ b/images/Shaft_00849.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9de0631565421f01f8a0c01644d1a57435b1d98a8a3905ec588a3e8a90312ee4 +size 94473 diff --git a/images/Shaft_00850.png b/images/Shaft_00850.png new file mode 100644 index 0000000000000000000000000000000000000000..01582cc3a93e62218ea653b0fdbe449858d16663 --- /dev/null +++ b/images/Shaft_00850.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e84d573485a89efaa1de0c21405947fa3c71f552f7ba7300ca6b3cfa66c175df +size 77166 diff --git a/images/Shaft_00851.png b/images/Shaft_00851.png new file mode 100644 index 0000000000000000000000000000000000000000..35a4a47cfe4249dba121480d79c87ebb6cc62aaa --- /dev/null +++ b/images/Shaft_00851.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d496ad729eda399039abc8f71b43a65be9450ed1eeb4ebf86595793bb42877fb +size 86644 diff --git a/images/Shaft_00852.png b/images/Shaft_00852.png new file mode 100644 index 0000000000000000000000000000000000000000..c843d0235dbf95abfb7999123cdceccbc71a63e9 --- /dev/null +++ b/images/Shaft_00852.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:586acc6dd71349d82b7ca204509cf319a9fb7cd1ff4883dc0453934ab0732875 +size 108322 diff --git a/images/Shaft_00853.png b/images/Shaft_00853.png new file mode 100644 index 0000000000000000000000000000000000000000..7593dc0e09d3d7b38ed6cb853314f22e462a2e75 --- /dev/null +++ b/images/Shaft_00853.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:403341d29af39d0d81b96b8705e5979bf87d0fa412226941dccd441ee389a7cd +size 70873 diff --git a/images/Shaft_00854.png b/images/Shaft_00854.png new file mode 100644 index 0000000000000000000000000000000000000000..439af6f6fc6f94bd0bd510f1ebe4e3142035932e --- /dev/null +++ b/images/Shaft_00854.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9fad658b02050f7022d0d234663a366c372e0853b4db8b92664f1b10ca75102 +size 81403 diff --git a/images/Shaft_00855.png b/images/Shaft_00855.png new file mode 100644 index 0000000000000000000000000000000000000000..a05e79b740cfa68691edaedf76a7b68d193f41d4 --- /dev/null +++ b/images/Shaft_00855.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a50a6572668f4e5d9962635ca84dbc9c90774d463e9cfdbebea83282b67910b +size 89958 diff --git a/images/Shaft_00856.png b/images/Shaft_00856.png new file mode 100644 index 0000000000000000000000000000000000000000..b16c15e2d980ec35a99563e5e472d6e47aa691f1 --- /dev/null +++ b/images/Shaft_00856.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e07a50a28d24c62401f8b2f0f302a9fcde1b47851a316c106ae6f396c2fcb9e +size 88948 diff --git a/images/Shaft_00857.png b/images/Shaft_00857.png new file mode 100644 index 0000000000000000000000000000000000000000..25fe7fb0a7f337d2cb4dc3eeba4df5c0f9a87e78 --- /dev/null +++ b/images/Shaft_00857.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcea611136b9ce55f976b102efebe0e86beb2cd98ce40312d47a8392b5cec61a +size 91307 diff --git a/images/Shaft_00858.png b/images/Shaft_00858.png new file mode 100644 index 0000000000000000000000000000000000000000..3edd259b1fac8f93857daf2b03855423a8f8f38a --- /dev/null +++ b/images/Shaft_00858.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c3b440aba4b3d1edac45c6da70482b5e37f611f685dfe528e403442c53511d0 +size 88349 diff --git a/images/Shaft_00859.png b/images/Shaft_00859.png new file mode 100644 index 0000000000000000000000000000000000000000..0016c3ac967fe3286009623b22a001e27ddb9fda --- /dev/null +++ b/images/Shaft_00859.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3642d8ce803ccc57a195d893bf0af045d3529550dae0efb489cae522714059b +size 85339 diff --git a/images/Shaft_00860.png b/images/Shaft_00860.png new file mode 100644 index 0000000000000000000000000000000000000000..3546ab7e2cc10ef9054a26530dda3000a9ab8269 --- /dev/null +++ b/images/Shaft_00860.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dca724b43fe10cfe8ac5b87885713cf5b460d5edcbe5a80b6fc39a38ba7eb595 +size 96807 diff --git a/images/Shaft_00861.png b/images/Shaft_00861.png new file mode 100644 index 0000000000000000000000000000000000000000..091a53412af1febefa90dc65f0e672ebfb940517 --- /dev/null +++ b/images/Shaft_00861.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cee3e05902ebdd5b62033bbbb0ca525b2912f8b3a49c9d57a4d02d1dba991dc +size 80278 diff --git a/images/Shaft_00862.png b/images/Shaft_00862.png new file mode 100644 index 0000000000000000000000000000000000000000..e61dac99614ca2ac785be98c6fb49b632a133c04 --- /dev/null +++ b/images/Shaft_00862.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17cfe2127473cbb54549a729aa595cbee118715999c1324d7abc64b17e380f48 +size 78051 diff --git a/images/Shaft_00863.png b/images/Shaft_00863.png new file mode 100644 index 0000000000000000000000000000000000000000..90be3d9d47efb2e47cd22d8d9e0563404e46e058 --- /dev/null +++ b/images/Shaft_00863.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c77814fb9c7bb99a527d9f6fbc5e2d317c59ec6a57e6b1f3b2e8c343751c7ad2 +size 80895 diff --git a/images/Shaft_00864.png b/images/Shaft_00864.png new file mode 100644 index 0000000000000000000000000000000000000000..ed8435776333c29d1d95a8f04bc307f2773bd00f --- /dev/null +++ b/images/Shaft_00864.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f77aed525b1384539952da2c6e9b12726f11669987a1c0012b2f15e34a41626 +size 86449 diff --git a/images/Shaft_00865.png b/images/Shaft_00865.png new file mode 100644 index 0000000000000000000000000000000000000000..a8d2a6278836b240bcc256e9a8b6619f8d296b24 --- /dev/null +++ b/images/Shaft_00865.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:844816dae0a63c18ec1a8110a2ab01d7ecce72d6ad787277b3c4f4bb51a366eb +size 109151 diff --git a/images/Shaft_00866.png b/images/Shaft_00866.png new file mode 100644 index 0000000000000000000000000000000000000000..5cc02da22a27365b2a012c336cd915a7def8ec9d --- /dev/null +++ b/images/Shaft_00866.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17682947e07da9ada47c46e843141beadc143229bb518ff0b77acd402ed4cca3 +size 78884 diff --git a/images/Shaft_00867.png b/images/Shaft_00867.png new file mode 100644 index 0000000000000000000000000000000000000000..12f0fc6f87a49a651d9ac443aa463ca6cfcaf0dc --- /dev/null +++ b/images/Shaft_00867.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce38170f31389847b4a2dd3369d4c366dccf866dfdbe79a2a4732693d3aa35da +size 75527 diff --git a/images/Shaft_00868.png b/images/Shaft_00868.png new file mode 100644 index 0000000000000000000000000000000000000000..9c8117a1154d424e26d9be4611f2e070c680bcc2 --- /dev/null +++ b/images/Shaft_00868.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e109211dd56caa3afe831be76f7a9e1c0c01f5618f6cd0897fd85a23b687a740 +size 93105 diff --git a/images/Shaft_00869.png b/images/Shaft_00869.png new file mode 100644 index 0000000000000000000000000000000000000000..aa6e9ab653a947d0b2931647aa347497a0395135 --- /dev/null +++ b/images/Shaft_00869.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5da357e821c8d77cf3ebfccb963d5d2b548a4862119200d736549208aa6e0c0f +size 84561 diff --git a/images/Shaft_00870.png b/images/Shaft_00870.png new file mode 100644 index 0000000000000000000000000000000000000000..a5362c8075c5b773a389bd8a031c24bebc7e6c47 --- /dev/null +++ b/images/Shaft_00870.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69d984a89fcd7a97cba27c8834b0d7032531ef13c20cc17626308fa7066770d8 +size 88529 diff --git a/images/Shaft_00871.png b/images/Shaft_00871.png new file mode 100644 index 0000000000000000000000000000000000000000..0c99a839d82486d4bb981c6a0c1395ed97dd8d6a --- /dev/null +++ b/images/Shaft_00871.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:369c848f0531ad7f1d547262687d0d9dddb16b831e86a55e32d6f273fa8ccfc2 +size 85646 diff --git a/images/Shaft_00872.png b/images/Shaft_00872.png new file mode 100644 index 0000000000000000000000000000000000000000..1b37f023f2232a24b08c8c682ef64f4b95c8fb65 --- /dev/null +++ b/images/Shaft_00872.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e16434cce3c774bddeb3ebf98fdc23ae36e90366f46ee94ba7573a044eb38230 +size 79934 diff --git a/images/Shaft_00873.png b/images/Shaft_00873.png new file mode 100644 index 0000000000000000000000000000000000000000..0b20b7ef36ebc56aaeacf8cb320621fcd6a1657f --- /dev/null +++ b/images/Shaft_00873.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d547423d6ec538799b1ad955fb74919d3691f7a427446401e37d96720b38a793 +size 77699 diff --git a/images/Shaft_00874.png b/images/Shaft_00874.png new file mode 100644 index 0000000000000000000000000000000000000000..e77d1e032ba32685f0691591cbae1741bb9ed819 --- /dev/null +++ b/images/Shaft_00874.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:325e863d262339ff25fa94ffc608b97697dcf1b4c869900fbfe51b4b0bec13a8 +size 84885 diff --git a/images/Shaft_00875.png b/images/Shaft_00875.png new file mode 100644 index 0000000000000000000000000000000000000000..9d0799a886aa3a92f41472359e473d04ae60f7be --- /dev/null +++ b/images/Shaft_00875.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddf9ccd9a263985fb544bece846291c41a8bdeb96d92cee163a54aa2131cb738 +size 79959 diff --git a/images/Shaft_00876.png b/images/Shaft_00876.png new file mode 100644 index 0000000000000000000000000000000000000000..4d1701bebf85e8eb8567bb26a456c356189ff4b4 --- /dev/null +++ b/images/Shaft_00876.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b0f887e3e3c1c4c051835197b3e3e9614584866d9562679c69c3a5cd74cdb01 +size 69031 diff --git a/images/Shaft_00877.png b/images/Shaft_00877.png new file mode 100644 index 0000000000000000000000000000000000000000..98b351f8175e78bd787ba5b6110ff5a5ab57f5ac --- /dev/null +++ b/images/Shaft_00877.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bedec8fe0c631dfd8b0bb01f07bd2a749fa9734cfd6de60f3750d106f80dd8fb +size 91312 diff --git a/images/Shaft_00878.png b/images/Shaft_00878.png new file mode 100644 index 0000000000000000000000000000000000000000..cc9b2a0ae1fc4c6e404a975e397f831f8915619c --- /dev/null +++ b/images/Shaft_00878.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfbfe22a044721a0de9ca8fa0c44b149cab292680e2910216932709297b68e7c +size 73391 diff --git a/images/Shaft_00879.png b/images/Shaft_00879.png new file mode 100644 index 0000000000000000000000000000000000000000..693407323efa83ae1f90ea846d478fd798c13cc4 --- /dev/null +++ b/images/Shaft_00879.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b5e6cb506d2035e27c865e824ffa2d47340ee7ca6ac9279257b2284cabb09cd +size 98145 diff --git a/images/Shaft_00880.png b/images/Shaft_00880.png new file mode 100644 index 0000000000000000000000000000000000000000..00df4de42b3fc546144aa4e5d06015a5bf1c4f46 --- /dev/null +++ b/images/Shaft_00880.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24b1f9c18d1bfe17755f026138ae8246731e26e974cda1fd01305a9b301dc700 +size 106474 diff --git a/images/Shaft_00881.png b/images/Shaft_00881.png new file mode 100644 index 0000000000000000000000000000000000000000..dd1830d08d42fd8492589839ca7c5817d22afb8f --- /dev/null +++ b/images/Shaft_00881.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:524381d07ce00c84c226abc00e75667de8baf98f3097cd7413dbb7fb22b40e2c +size 74261 diff --git a/images/Shaft_00882.png b/images/Shaft_00882.png new file mode 100644 index 0000000000000000000000000000000000000000..bd7efb9475dc5e7e6e2fbf8fef58f005a5f94879 --- /dev/null +++ b/images/Shaft_00882.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:552af3baa71530a5b390ee80c783aa89afda2cfaee2941ab755640c508c80f58 +size 87654 diff --git a/images/Shaft_00883.png b/images/Shaft_00883.png new file mode 100644 index 0000000000000000000000000000000000000000..401d717a8e81a5fe0ec67751d29ed672faf3413e --- /dev/null +++ b/images/Shaft_00883.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90ef8e59c16ebfaa0f86971bd988f6529bfeda3b0c45ff4d55c6432f7c3b7ac3 +size 100099 diff --git a/images/Shaft_00884.png b/images/Shaft_00884.png new file mode 100644 index 0000000000000000000000000000000000000000..606c5c78440815e692805f2b34a4844c6ab577c1 --- /dev/null +++ b/images/Shaft_00884.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7932f358bb92266d325b17f35e4a4d43226c93121b2ebbe672bce2341a7d26f8 +size 71079 diff --git a/images/Shaft_00885.png b/images/Shaft_00885.png new file mode 100644 index 0000000000000000000000000000000000000000..0960f88d5cacd899b7380dc02681cb897eab49f4 --- /dev/null +++ b/images/Shaft_00885.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd61b66561d9aa684318017cc068e0f69b5c07266dbf72c46493b732630f1c6d +size 74224 diff --git a/images/Shaft_00886.png b/images/Shaft_00886.png new file mode 100644 index 0000000000000000000000000000000000000000..230eaea0d96a9ca59eb0611650e60c7f1f5bba93 --- /dev/null +++ b/images/Shaft_00886.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a159c1ebda51dd1541864667e91d14cd0ce4c13bfc8e692ba23e2e12a95bafa +size 91367 diff --git a/images/Shaft_00887.png b/images/Shaft_00887.png new file mode 100644 index 0000000000000000000000000000000000000000..9db9f4e4b4241a69b378e0109e7fb6ceb5caa4c0 --- /dev/null +++ b/images/Shaft_00887.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f53577628107684ff7e9a3164eac108465222adf36355d9c53063cc0f366088 +size 73067 diff --git a/images/Shaft_00888.png b/images/Shaft_00888.png new file mode 100644 index 0000000000000000000000000000000000000000..bdbfa2dbd2752c88707b453cce042e14aacbcd59 --- /dev/null +++ b/images/Shaft_00888.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:744cda5746e43c0abdb95f2d35209a94c865c005e120fa8c8ace1c8665f7f13a +size 113876 diff --git a/images/Shaft_00889.png b/images/Shaft_00889.png new file mode 100644 index 0000000000000000000000000000000000000000..180a236a808f97b3357c699deede6410226c09d8 --- /dev/null +++ b/images/Shaft_00889.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4e3d168f36eb6eaff9e55e1e054a112aae715e8e268226a19c010a0d9cbdfa8 +size 70969 diff --git a/images/Shaft_00890.png b/images/Shaft_00890.png new file mode 100644 index 0000000000000000000000000000000000000000..b81d4d4b84ecde673641aeaba287896b0ba74d3c --- /dev/null +++ b/images/Shaft_00890.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a5fdc990989fe92c22ff54cd56cba36121c2f9f5a0f5c17bc860007e6262b6b +size 76288 diff --git a/images/Shaft_00891.png b/images/Shaft_00891.png new file mode 100644 index 0000000000000000000000000000000000000000..6ffd339ac117d9bf2fe3e1c32aa211ec3e205069 --- /dev/null +++ b/images/Shaft_00891.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cd7887c8470de9c13552f857d29c48a45b5dfb939b00cfafef1b971bb22044c +size 98794 diff --git a/images/Shaft_00892.png b/images/Shaft_00892.png new file mode 100644 index 0000000000000000000000000000000000000000..e1ea76bfe29ffcaef1740b4cd576b37255b4bc85 --- /dev/null +++ b/images/Shaft_00892.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:644ae6743bbbcbfde43489f5fbbbe451c2483619d054d3d3f806b657428bddeb +size 72448 diff --git a/images/Shaft_00893.png b/images/Shaft_00893.png new file mode 100644 index 0000000000000000000000000000000000000000..96e24b5eafeb003d8cf541edf40768898a3155f5 --- /dev/null +++ b/images/Shaft_00893.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b31aa2aa16402f10a6e7c1f2f0c5ab37119501607e240de640b3c564fe3618ba +size 81397 diff --git a/images/Shaft_00894.png b/images/Shaft_00894.png new file mode 100644 index 0000000000000000000000000000000000000000..450d5da34cb291a71a2eca08ec9a794e17673d49 --- /dev/null +++ b/images/Shaft_00894.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b0c889e42416a3be66258fd61023cf62ec2ca50fe2fd7d392ba6f1e17bfb17f +size 76367 diff --git a/images/Shaft_00895.png b/images/Shaft_00895.png new file mode 100644 index 0000000000000000000000000000000000000000..7d6e39bed28170e1cd555edbfd9c64bd4839e1a2 --- /dev/null +++ b/images/Shaft_00895.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f474a6449549a8d08bbacd7ece9a26f55883c33eb6a6b2ce781c109bdf0059d +size 84635 diff --git a/images/Shaft_00896.png b/images/Shaft_00896.png new file mode 100644 index 0000000000000000000000000000000000000000..ac7fd89ea16b9b98132da75fe7a453daeac4c362 --- /dev/null +++ b/images/Shaft_00896.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5cf2bbbda9b6fd471b25a16f41f9236dc76afa2299c1268927026e8f101e967e +size 97680 diff --git a/images/Shaft_00897.png b/images/Shaft_00897.png new file mode 100644 index 0000000000000000000000000000000000000000..20992daaabf16e4860a923337af3d8ad86ead76c --- /dev/null +++ b/images/Shaft_00897.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7c90809782468dba84e27834ae7d4784e8f2bba71aef45fff13c78250452813 +size 67245 diff --git a/images/Shaft_00898.png b/images/Shaft_00898.png new file mode 100644 index 0000000000000000000000000000000000000000..f65a0ac970e4938900b9e6d63cae2e85f028e56a --- /dev/null +++ b/images/Shaft_00898.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cca803bbc1ed48fe0110ac1de4083872abff27ab564f826e31ad7b6fef736bf6 +size 80480 diff --git a/images/Shaft_00899.png b/images/Shaft_00899.png new file mode 100644 index 0000000000000000000000000000000000000000..f20a01d9937af910e15f8e065255f8fa7d60db47 --- /dev/null +++ b/images/Shaft_00899.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3da4c61bcb4590af36cf69bed433716857d826c22108a028f2663994bec9fdda +size 101727 diff --git a/images/Shaft_00900.png b/images/Shaft_00900.png new file mode 100644 index 0000000000000000000000000000000000000000..29846690da3bcebd5760449c2736c70368a246b5 --- /dev/null +++ b/images/Shaft_00900.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f837e162d73233509793d35603e3657173fd7c7eb87cbdbfabb5532c35ed7a23 +size 84031 diff --git a/images/Shaft_00901.png b/images/Shaft_00901.png new file mode 100644 index 0000000000000000000000000000000000000000..beedab203f10019ed4b669478f5fe6414b37def4 --- /dev/null +++ b/images/Shaft_00901.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c34c33d6d73561f94695cce884f4da5ef2c7a6bfd9e9a576a2535207b96717ba +size 82974 diff --git a/images/Shaft_00902.png b/images/Shaft_00902.png new file mode 100644 index 0000000000000000000000000000000000000000..bb0b2d609f14afce2d2b62860c651a95718cbacf --- /dev/null +++ b/images/Shaft_00902.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce373cd996460c9f9cc4c4a177752b3a206871c42e0327ad7e16d620ed1c85af +size 72432 diff --git a/images/Shaft_00903.png b/images/Shaft_00903.png new file mode 100644 index 0000000000000000000000000000000000000000..1c84e5e6f46c4a05ac6d5e479c782b81d80f7181 --- /dev/null +++ b/images/Shaft_00903.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aae79062b1ab0a7ea6503b155c6fbdfdf7eb078d3e3c1f4fa8379dca0711eb7e +size 94803 diff --git a/images/Shaft_00904.png b/images/Shaft_00904.png new file mode 100644 index 0000000000000000000000000000000000000000..7a3e840b82d0265ea901dfe4ea6f7bdfc54f6d8e --- /dev/null +++ b/images/Shaft_00904.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:810fb8d69956352e6ace15cf267fb6373a6205a9f1470a4b932efd5e529ecbd5 +size 82237 diff --git a/images/Shaft_00905.png b/images/Shaft_00905.png new file mode 100644 index 0000000000000000000000000000000000000000..8e04921957f4625096ff0457d88bdbd7a5f3a28e --- /dev/null +++ b/images/Shaft_00905.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b7562e85383ab725d4b00e55569458ed4438002386cae3731fc2b881f0fa08b +size 81043 diff --git a/images/Shaft_00906.png b/images/Shaft_00906.png new file mode 100644 index 0000000000000000000000000000000000000000..3b1711d9c962e0b269dc461917ecd3874c896bde --- /dev/null +++ b/images/Shaft_00906.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:421f32b37b59372907ce2043ef60a1686416e68caec7618b0af7c26c2f53f506 +size 104900 diff --git a/images/Shaft_00907.png b/images/Shaft_00907.png new file mode 100644 index 0000000000000000000000000000000000000000..b7bcae749211f57e8d59489ec60936f5bb6433c7 --- /dev/null +++ b/images/Shaft_00907.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48e31848045d4d9f342266c7e78a836ee3b6ec8a7c9b279f0378a270ec99844 +size 84703 diff --git a/images/Shaft_00908.png b/images/Shaft_00908.png new file mode 100644 index 0000000000000000000000000000000000000000..07feda9c589b112e7055ae72356ba59c2b42cb2d --- /dev/null +++ b/images/Shaft_00908.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ce189bf5d87d48145ea62e79996dff58f2ee3ff72d75fe2af6a9a1c20266181 +size 84469 diff --git a/images/Shaft_00909.png b/images/Shaft_00909.png new file mode 100644 index 0000000000000000000000000000000000000000..422392078370e32761c8cffbd3177c365b82b4d6 --- /dev/null +++ b/images/Shaft_00909.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5b258a771df7a80768fa56bd78493e9fd2ed1a32492ab5d7cdc6d53f1744369 +size 88019 diff --git a/images/Shaft_00910.png b/images/Shaft_00910.png new file mode 100644 index 0000000000000000000000000000000000000000..c06791748694a623a80eacadf5ea3f9f564707d7 --- /dev/null +++ b/images/Shaft_00910.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de6e31e042ee2a2792f0f30e65fdca41a6f957bea84bc9fd72cbae1a3319193a +size 70482 diff --git a/images/Shaft_00911.png b/images/Shaft_00911.png new file mode 100644 index 0000000000000000000000000000000000000000..bb5b5729b9e9a25b74c6fcc39ff9fb98a32e5bf7 --- /dev/null +++ b/images/Shaft_00911.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48aa0b903ba6dda9249c711e4457b6a7fca4b434b96b03d5cb47e54eaf2266ae +size 104789 diff --git a/images/Shaft_00912.png b/images/Shaft_00912.png new file mode 100644 index 0000000000000000000000000000000000000000..9d161ef83f55b37968aff566a814cda694c35823 --- /dev/null +++ b/images/Shaft_00912.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b041df0560b1e1a305f04b651abfd1d0b78b1bad59171b302e6eafd1fb0fadd4 +size 69219 diff --git a/images/Shaft_00913.png b/images/Shaft_00913.png new file mode 100644 index 0000000000000000000000000000000000000000..1bf40420dc9789ddfbc16f4b32b9e1d65d03519e --- /dev/null +++ b/images/Shaft_00913.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ada02e886869a5804496fe7b8c23084a3a767976e35a17fb06d9ecf7d53d149d +size 87364 diff --git a/images/Shaft_00914.png b/images/Shaft_00914.png new file mode 100644 index 0000000000000000000000000000000000000000..c4b87b3593b4df3c8c5e9a74d5f7277b39f20b8e --- /dev/null +++ b/images/Shaft_00914.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8856aef94506e1201007f5d3c458ab5324dd0343942218c314986e3f416a7dd +size 72748 diff --git a/images/Shaft_00915.png b/images/Shaft_00915.png new file mode 100644 index 0000000000000000000000000000000000000000..0217e80797fb64df5617477901d8d54514a38e55 --- /dev/null +++ b/images/Shaft_00915.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4b93ebc09c8c1ba5f8dfe46d31bbe244ecb9c50bee89c7d8317c9cc5c587f96 +size 96602 diff --git a/images/Shaft_00916.png b/images/Shaft_00916.png new file mode 100644 index 0000000000000000000000000000000000000000..6a63ed4426d08052e7212193091ca4fd0e8cbfd6 --- /dev/null +++ b/images/Shaft_00916.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bd6ea8e4a26c025df811172873618f19e84d396f2fbec9e4a0bc5a6298a7b5a +size 91594 diff --git a/images/Shaft_00917.png b/images/Shaft_00917.png new file mode 100644 index 0000000000000000000000000000000000000000..1814d309fc08dbe626bde7ee8728bba63087338a --- /dev/null +++ b/images/Shaft_00917.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fdae855201095321f6f3ca713f8d1a7eafce2df08540426c5c98a4bbb5eec6b5 +size 72694 diff --git a/images/Shaft_00918.png b/images/Shaft_00918.png new file mode 100644 index 0000000000000000000000000000000000000000..023afe8b01c01285ed0041fe96ee1415805cb68a --- /dev/null +++ b/images/Shaft_00918.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c55d8c977fcc18417e24990c0f21f8a6658b27857f5329555ab81822edb2809c +size 81583 diff --git a/images/Shaft_00919.png b/images/Shaft_00919.png new file mode 100644 index 0000000000000000000000000000000000000000..a0d103cc2c6d82f582f006c4a5110a93ef218a44 --- /dev/null +++ b/images/Shaft_00919.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3349a9d797b1129712fac818a8dda8f01de64c23807c39c2408300ef58706cb5 +size 70010 diff --git a/images/Shaft_00920.png b/images/Shaft_00920.png new file mode 100644 index 0000000000000000000000000000000000000000..92c0af92c5efe8a5e56f0cd779f9585a86870c65 --- /dev/null +++ b/images/Shaft_00920.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:013963f8f12be168940194d49849ac4edc766989df29a7e44a828ff87e019e03 +size 80374 diff --git a/images/Shaft_00921.png b/images/Shaft_00921.png new file mode 100644 index 0000000000000000000000000000000000000000..5e000ff479cfb2c89175258fad4004c7730a3d1d --- /dev/null +++ b/images/Shaft_00921.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:206b849f34be1ac69aaebc276ad306c3ed8ea49e6e59036128b06ef8593157f4 +size 71096 diff --git a/images/Shaft_00922.png b/images/Shaft_00922.png new file mode 100644 index 0000000000000000000000000000000000000000..9e43686df953bc525dc0bf74ba1a34a10a5b8571 --- /dev/null +++ b/images/Shaft_00922.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d605c07b7a923599c818ed18da096553a2c7c502d852f1e0cd70e5bf1faac237 +size 116531 diff --git a/images/Shaft_00923.png b/images/Shaft_00923.png new file mode 100644 index 0000000000000000000000000000000000000000..230146e7b32982bfbec74071e9ae5a2848db5514 --- /dev/null +++ b/images/Shaft_00923.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4476592cfc44213dd31e5196385b5432baea20df4914f7233b61d392dc86a2a +size 98361 diff --git a/images/Shaft_00924.png b/images/Shaft_00924.png new file mode 100644 index 0000000000000000000000000000000000000000..531559203dd0d050b5ef0bbe86b81adef2bc2094 --- /dev/null +++ b/images/Shaft_00924.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:820a99de996293b07dece88d9b565d2da7b7422f2f7c931aec0a64bf1f67f5d4 +size 72829 diff --git a/images/Shaft_00925.png b/images/Shaft_00925.png new file mode 100644 index 0000000000000000000000000000000000000000..cbd7af81e1fed6cba459124ec0e52dbcb63fedbe --- /dev/null +++ b/images/Shaft_00925.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ceedf665e4ac0f61b8793558d3302d0eed18a6e4e5668792687804e4434742b8 +size 99237 diff --git a/images/Shaft_00926.png b/images/Shaft_00926.png new file mode 100644 index 0000000000000000000000000000000000000000..197e26becf4e2b1434950b236f7aa4cc5bb5fc0a --- /dev/null +++ b/images/Shaft_00926.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00ca16ce94b388452827941a6d5d9d6f40acde003a376d98eeecd2485d706a60 +size 89255 diff --git a/images/Shaft_00927.png b/images/Shaft_00927.png new file mode 100644 index 0000000000000000000000000000000000000000..b9b7c4ffc91f3ec64bebf1ee77ea24c2e5215d45 --- /dev/null +++ b/images/Shaft_00927.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8c3009a7537eb6ec92a8fa15460d61366a61a320a6ef80e9dfff2f4f579502f +size 68021 diff --git a/images/Shaft_00928.png b/images/Shaft_00928.png new file mode 100644 index 0000000000000000000000000000000000000000..84c97c83cadd4c63084cae0e12477c399978fe30 --- /dev/null +++ b/images/Shaft_00928.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0344af1ca063a1d47c49fdbe770dac63bee62c7ff97395fc7efb0f938f50db52 +size 98773 diff --git a/images/Shaft_00929.png b/images/Shaft_00929.png new file mode 100644 index 0000000000000000000000000000000000000000..2be20ac06200401acee98a89a5b97531e6f4b38e --- /dev/null +++ b/images/Shaft_00929.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b4df0242412d427b6fecef3e72355a803673eafa165fd57735e194d6be667d5 +size 109454 diff --git a/images/Shaft_00930.png b/images/Shaft_00930.png new file mode 100644 index 0000000000000000000000000000000000000000..b094c89798ca1c6fd61a1dd3c88d9c955256bc5f --- /dev/null +++ b/images/Shaft_00930.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9f7b575dafc954791f39b88f4fcfca3a38da76d4f72b278150fdda6f4957ad0 +size 90646 diff --git a/images/Shaft_00931.png b/images/Shaft_00931.png new file mode 100644 index 0000000000000000000000000000000000000000..05b342d74ada10c3e770ec1c67e3ee897a59e014 --- /dev/null +++ b/images/Shaft_00931.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b73549b5749143e5e32cc43fc200af543b67d370e88830e93cb1a16b303866f +size 67539 diff --git a/images/Shaft_00932.png b/images/Shaft_00932.png new file mode 100644 index 0000000000000000000000000000000000000000..5530cf9ad35fa46f66643111b50a5622fc2f3bf5 --- /dev/null +++ b/images/Shaft_00932.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55f7d58a427aa8f3c48182624d2972b20aac7a6e54aa29891dd04848d3d8e73a +size 85709 diff --git a/images/Shaft_00933.png b/images/Shaft_00933.png new file mode 100644 index 0000000000000000000000000000000000000000..0a4c3fe70513c5ffcb3ad43a61fbaaf83de6e7b8 --- /dev/null +++ b/images/Shaft_00933.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f2ea02fdc2a88f3759f115ab80d80e122c9dddb1fdcc04964d2df12e9eb59a6 +size 74970 diff --git a/images/Shaft_00934.png b/images/Shaft_00934.png new file mode 100644 index 0000000000000000000000000000000000000000..972e6bed6dc8817e0f646f0984c91d4c891bfadd --- /dev/null +++ b/images/Shaft_00934.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4357528ec715a69acd9081de77d17b0ddcd47b0d0c99e9f8717e12d469a6493 +size 95813 diff --git a/images/Shaft_00935.png b/images/Shaft_00935.png new file mode 100644 index 0000000000000000000000000000000000000000..a31be9b37cf2f11384f4d77b2346cef864f13c68 --- /dev/null +++ b/images/Shaft_00935.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb3baa0816062d2c9c5fd22b53abb13be35803f678984fa4b1ea479eb1c7125f +size 77253 diff --git a/images/Shaft_00936.png b/images/Shaft_00936.png new file mode 100644 index 0000000000000000000000000000000000000000..1959c933dacb946bb3f401595d1f502fade084c1 --- /dev/null +++ b/images/Shaft_00936.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efdca8fd876764a81b684fd180966978d2acdb8135289474ff0663293ba0ba36 +size 91398 diff --git a/images/Shaft_00937.png b/images/Shaft_00937.png new file mode 100644 index 0000000000000000000000000000000000000000..67cffdae32ad761c1bed232d0cc96b11c208f84a --- /dev/null +++ b/images/Shaft_00937.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90402c4da97736be50a77c32ac434c660b735230efc75012aeb0037087566a60 +size 82697 diff --git a/images/Shaft_00938.png b/images/Shaft_00938.png new file mode 100644 index 0000000000000000000000000000000000000000..376ff8ad94b49d8e1ea943b6c0c77dcb14c11cf1 --- /dev/null +++ b/images/Shaft_00938.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b7dfa8af0b9ab43bbbc41dd6cf76060e795e3a230b032e90030a2e1bdf07e39 +size 70679 diff --git a/images/Shaft_00939.png b/images/Shaft_00939.png new file mode 100644 index 0000000000000000000000000000000000000000..657f1e2f9a0e8189de4b55e6583d04cc40792cd4 --- /dev/null +++ b/images/Shaft_00939.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2acd8b2c4df6a4b015cbd7b267d9c3de96b1b018b43bfc6f226cd3c39ef924c8 +size 76338 diff --git a/images/Shaft_00940.png b/images/Shaft_00940.png new file mode 100644 index 0000000000000000000000000000000000000000..79d5c0af76cac4844a85c675220108a58947c23d --- /dev/null +++ b/images/Shaft_00940.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:093591101586a3374e059b1084995f9a58126c37c04550e0bc911bb94aed4595 +size 76097 diff --git a/images/Shaft_00941.png b/images/Shaft_00941.png new file mode 100644 index 0000000000000000000000000000000000000000..0250e2715f498f3422294b7ec6c41cfffa71d8c5 --- /dev/null +++ b/images/Shaft_00941.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e56beb14fb68b27decd2cee5ce1a146d9cd02a964c0855bef08eb789cea4593d +size 88665 diff --git a/images/Shaft_00942.png b/images/Shaft_00942.png new file mode 100644 index 0000000000000000000000000000000000000000..4b5024df16e927f943328acf0c2c81ee5b548129 --- /dev/null +++ b/images/Shaft_00942.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce6cb821d1bd1cc71ac3bf5967c168cc7b1964c30e70fe97f6eb5d406893906e +size 92658 diff --git a/images/Shaft_00943.png b/images/Shaft_00943.png new file mode 100644 index 0000000000000000000000000000000000000000..13099ab1856292df7f363be3bff8784838057d83 --- /dev/null +++ b/images/Shaft_00943.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47a79cef12e97d6ca7e5cff3000ab9d3caf66bfa2844151af9dbfd57d38425c5 +size 86845 diff --git a/images/Shaft_00944.png b/images/Shaft_00944.png new file mode 100644 index 0000000000000000000000000000000000000000..e4b1317a0148ebb21f73cb58885a462f2125bf97 --- /dev/null +++ b/images/Shaft_00944.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a20fc8e1a1e3283db39869ebc2077709294212f3c99dd978a16265a5482c01c +size 105324 diff --git a/images/Shaft_00945.png b/images/Shaft_00945.png new file mode 100644 index 0000000000000000000000000000000000000000..acf023a7312d6040f080019ec31f8b29df701b22 --- /dev/null +++ b/images/Shaft_00945.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fc223ed82e7ff4378baf39564b4cbfe841a96bdc0ffdc3f7d49b47fe6fa921b +size 94865 diff --git a/images/Shaft_00946.png b/images/Shaft_00946.png new file mode 100644 index 0000000000000000000000000000000000000000..1d586481e6939b12ab5de6d9cf51450bf428602c --- /dev/null +++ b/images/Shaft_00946.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a296882d5c31ffde182cae8b00efa1d0bb99a4cae688c432e5d3c6bcda5e7793 +size 76283 diff --git a/images/Shaft_00947.png b/images/Shaft_00947.png new file mode 100644 index 0000000000000000000000000000000000000000..74681982b282f3896ce09cb36aa38fbce8a83420 --- /dev/null +++ b/images/Shaft_00947.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aad493ab0313f62053939b8eead9faa7d5ebce60ea497100a8b49a0a03d019bc +size 84386 diff --git a/images/Shaft_00948.png b/images/Shaft_00948.png new file mode 100644 index 0000000000000000000000000000000000000000..8051407ec8aae76039cdc0209c0875f169044520 --- /dev/null +++ b/images/Shaft_00948.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18ba157e9c736d8bad4c25ed7804617fcf898e7a64b39493fcdbf91f4181a1fe +size 80676 diff --git a/images/Shaft_00949.png b/images/Shaft_00949.png new file mode 100644 index 0000000000000000000000000000000000000000..46ba1a6a6aab32974ce0c5045a7741640e91c466 --- /dev/null +++ b/images/Shaft_00949.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95a2809a356e8883bd5bfe0b780ad3f66fe480e537570bd2f8d4d06efa80df25 +size 99794 diff --git a/images/Shaft_00950.png b/images/Shaft_00950.png new file mode 100644 index 0000000000000000000000000000000000000000..99a713b4bb6b459ca7ac09928952660fe8e712c3 --- /dev/null +++ b/images/Shaft_00950.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8ccd114f7eff47e7fa2ef17b501b9bb0651417bd5853a2b87f4526d8c4e1a2e +size 105582 diff --git a/images/Shaft_00951.png b/images/Shaft_00951.png new file mode 100644 index 0000000000000000000000000000000000000000..991a8135580edeee2b3866aa0a1c6a5d620aa79a --- /dev/null +++ b/images/Shaft_00951.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89f3960f36fd1ff7ae4dc65ef3c27530fe3e9d9b88740b1ec68dfd7e0e8fa65c +size 82579 diff --git a/images/Shaft_00952.png b/images/Shaft_00952.png new file mode 100644 index 0000000000000000000000000000000000000000..d983c175754a6abec74f39c60ab844eec6d17ef0 --- /dev/null +++ b/images/Shaft_00952.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dbf1d26af9246e0bbc4be9822df8425c59dd0da6ec54b48e101c214f719e31a +size 83722 diff --git a/images/Shaft_00953.png b/images/Shaft_00953.png new file mode 100644 index 0000000000000000000000000000000000000000..dd7d2549abb41a87cc01e6106910bb1fab92caf1 --- /dev/null +++ b/images/Shaft_00953.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eeb02ec9bbf702e255ff988543c2353156e02dce22b89263e9a973a85026ab1c +size 87460 diff --git a/images/Shaft_00954.png b/images/Shaft_00954.png new file mode 100644 index 0000000000000000000000000000000000000000..ac50c04cc5ac42111b8405694a504a1bf0e34c5e --- /dev/null +++ b/images/Shaft_00954.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:091d02172f15612ec3d64e2dcfa08a606d34237d7410049361ee3bde490cf7cc +size 77794 diff --git a/images/Shaft_00955.png b/images/Shaft_00955.png new file mode 100644 index 0000000000000000000000000000000000000000..0f3cce2fdc02aceccd8878af00c396ca13019aa3 --- /dev/null +++ b/images/Shaft_00955.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f77225d6429d070060b80d43e41e79a285de55ec149b9b59968cf3ce59fc596d +size 92086 diff --git a/images/Shaft_00956.png b/images/Shaft_00956.png new file mode 100644 index 0000000000000000000000000000000000000000..37d00c0d3c74cdfccb053278257a9c49a010d9b4 --- /dev/null +++ b/images/Shaft_00956.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2f566baddf1c99b24d32841c1b957aad20627e8756d025a4f7ee24c0c35e45f +size 117054 diff --git a/images/Shaft_00957.png b/images/Shaft_00957.png new file mode 100644 index 0000000000000000000000000000000000000000..2caa4b6b26b60532464c8da5b0f147c39f2c66e5 --- /dev/null +++ b/images/Shaft_00957.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6bdeca608e20ce2c9b7be2431b9d5c51da59565ca5c9e96308b08dfbe4fc9e6 +size 75874 diff --git a/images/Shaft_00958.png b/images/Shaft_00958.png new file mode 100644 index 0000000000000000000000000000000000000000..fb5cc15f1a5f7a859836a01d99daaedfc81ed7df --- /dev/null +++ b/images/Shaft_00958.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b412816104f64053a638a3154175ae95d2121aabff6ab54b213509e06bb98381 +size 101956 diff --git a/images/Shaft_00959.png b/images/Shaft_00959.png new file mode 100644 index 0000000000000000000000000000000000000000..6600bf41cea72f5f7c84b93312aa25075b34d782 --- /dev/null +++ b/images/Shaft_00959.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e79abd60788c47d8f1b008f3c97f27c177c18cf0e17e4ab91284137db56dfc6 +size 70259 diff --git a/images/Shaft_00960.png b/images/Shaft_00960.png new file mode 100644 index 0000000000000000000000000000000000000000..b1eda4bee28941477ad88d62f5f7410c19ca93db --- /dev/null +++ b/images/Shaft_00960.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b98719ab3323296222ec3920aa6cedf4738870b876754394bcb3db4d5f13a0a +size 93647 diff --git a/images/Shaft_00961.png b/images/Shaft_00961.png new file mode 100644 index 0000000000000000000000000000000000000000..10515514cffdbf1fe9b9bacfa15a1d1b6eca0156 --- /dev/null +++ b/images/Shaft_00961.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8326912e521fd52baa14b783a01a6a4df5ff0e143b3c8e4a762d05a4eb6cd27b +size 72826 diff --git a/images/Shaft_00962.png b/images/Shaft_00962.png new file mode 100644 index 0000000000000000000000000000000000000000..e3b9c1e2706036271fd6997ca30ec1e389f60582 --- /dev/null +++ b/images/Shaft_00962.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e22332655ecc04977602943d670bb045527219df92c70565baeee7e61aefc5d1 +size 72787 diff --git a/images/Shaft_00963.png b/images/Shaft_00963.png new file mode 100644 index 0000000000000000000000000000000000000000..b87cee554c8bb3c75ae87c1c8bd62dc4fd93c248 --- /dev/null +++ b/images/Shaft_00963.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6234705c94b64f57ecef7c55fa65e6d3c9809793066cd75ae3d7cde331e947eb +size 111046 diff --git a/images/Shaft_00964.png b/images/Shaft_00964.png new file mode 100644 index 0000000000000000000000000000000000000000..c631f35b741ef4a35414cb2ec9f2d6825c68f379 --- /dev/null +++ b/images/Shaft_00964.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94af94190dca827ed6993729086ca7246911723e335e476b88a8a0dd92da61fc +size 73676 diff --git a/images/Shaft_00965.png b/images/Shaft_00965.png new file mode 100644 index 0000000000000000000000000000000000000000..9a74e9a427664f2c175b723fda8a37b819ebb500 --- /dev/null +++ b/images/Shaft_00965.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36e1fff0ddf5b4f93f0711f8816e8fc5112c640b3cdcbea4af05aba0f3505efa +size 77052 diff --git a/images/Shaft_00966.png b/images/Shaft_00966.png new file mode 100644 index 0000000000000000000000000000000000000000..71b136003c7fff2e0662ee799554603a6223ecfa --- /dev/null +++ b/images/Shaft_00966.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ba89ef6ce9352af0df26e0119fa6a84ed25a1e3d9d18a4fb7f9222e2d7e3eff +size 73924 diff --git a/images/Shaft_00967.png b/images/Shaft_00967.png new file mode 100644 index 0000000000000000000000000000000000000000..ad1990c9b29c71999506771bfd7c894e5326017d --- /dev/null +++ b/images/Shaft_00967.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e4ce6dd98e06c1577a809fa3b052bf6ec6820e6bbf19e6b7c1e26551857735b +size 80138 diff --git a/images/Shaft_00968.png b/images/Shaft_00968.png new file mode 100644 index 0000000000000000000000000000000000000000..e0e96d3036936f166573cadbdf38ed3ec319c115 --- /dev/null +++ b/images/Shaft_00968.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:761d99456cc7fce0d46ab46dbea33f0258c29026eb6badb7abfadef5e3344abf +size 85729 diff --git a/images/Shaft_00969.png b/images/Shaft_00969.png new file mode 100644 index 0000000000000000000000000000000000000000..76ec2fc38b0d9b399c56a39b0589aef8d4897bc9 --- /dev/null +++ b/images/Shaft_00969.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da040bfc1d9e800d6a6b32689705ab41cf42ec81ae483e96d14e474f0d53ce17 +size 87909 diff --git a/images/Shaft_00970.png b/images/Shaft_00970.png new file mode 100644 index 0000000000000000000000000000000000000000..52f3796099eff6ce63735ea8108cc9c283afd554 --- /dev/null +++ b/images/Shaft_00970.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b89d00cadd290aa5f643b74f2743187d8bf8015d2c40d9365248ed81028edd17 +size 81264 diff --git a/images/Shaft_00971.png b/images/Shaft_00971.png new file mode 100644 index 0000000000000000000000000000000000000000..e4a23b9d5b91a63f76e4fbbcd016c1f237a24715 --- /dev/null +++ b/images/Shaft_00971.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c0e911a6195fee1ba6a4324f68e72be0f53e68cdabb447a803e46a46b12578d +size 84090 diff --git a/images/Shaft_00972.png b/images/Shaft_00972.png new file mode 100644 index 0000000000000000000000000000000000000000..fb03b54cd12dfd0e430b00e7cd3650f6216159e7 --- /dev/null +++ b/images/Shaft_00972.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9569e38dc9d81406245ddbe5b669e60049676d0098333a2906a01bff13f2a5de +size 72405 diff --git a/images/Shaft_00973.png b/images/Shaft_00973.png new file mode 100644 index 0000000000000000000000000000000000000000..2da7f032f1385f5153bf8334957643413813c687 --- /dev/null +++ b/images/Shaft_00973.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42a73e73a452d61975105224e69c16299e7b4e9e90e634141173680641d1cebb +size 87453 diff --git a/images/Shaft_00974.png b/images/Shaft_00974.png new file mode 100644 index 0000000000000000000000000000000000000000..c3d977643b6d4935a62e96be509492042fc3055e --- /dev/null +++ b/images/Shaft_00974.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1df86802b22b107ff05f59b51051732952b1b9f6918a5feb8aab6c86f3cd20e8 +size 83691 diff --git a/images/Shaft_00975.png b/images/Shaft_00975.png new file mode 100644 index 0000000000000000000000000000000000000000..4d605f165aafb0bac3f0dadf7e47b4dd62e7560b --- /dev/null +++ b/images/Shaft_00975.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90f696658eba7040a2852ae27482f5cc3cf031b60bb1df4369c117eb7dd048bd +size 100587 diff --git a/images/Shaft_00976.png b/images/Shaft_00976.png new file mode 100644 index 0000000000000000000000000000000000000000..db473422d20f417a4925806fc55166e0a69c4f58 --- /dev/null +++ b/images/Shaft_00976.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eae7af9ba22ab62f8eef58636d89a21ffc947613eadb1e00bdb5ca87aae1179e +size 86755 diff --git a/images/Shaft_00977.png b/images/Shaft_00977.png new file mode 100644 index 0000000000000000000000000000000000000000..d061bb7415bd8721f4fa2a1e03230b04eea4c107 --- /dev/null +++ b/images/Shaft_00977.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84ffd681be114dce511f6b21986ce05cd7a8cbc34ac9eecaebf85fe2c016871d +size 85857 diff --git a/images/Shaft_00978.png b/images/Shaft_00978.png new file mode 100644 index 0000000000000000000000000000000000000000..384dafcd417b1b9d8cf17b3ad8233bfae6d75a64 --- /dev/null +++ b/images/Shaft_00978.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0947de6fbab15617c8e9f68ce5c81bf771ef33ee27ffdd374306f6d21338a5c +size 76194 diff --git a/images/Shaft_00979.png b/images/Shaft_00979.png new file mode 100644 index 0000000000000000000000000000000000000000..ff473d1fadf464859b801f6f3297a6134da43c2c --- /dev/null +++ b/images/Shaft_00979.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baaae8b7476eee74908bed76efddaa9f249d3b1ae8934fa0ae35e7fe611f4360 +size 92855 diff --git a/images/Shaft_00980.png b/images/Shaft_00980.png new file mode 100644 index 0000000000000000000000000000000000000000..f9f5a33b3abfa88ab6e7f11b7fc6766f1975854b --- /dev/null +++ b/images/Shaft_00980.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:266cf9df95b1fd83f8577fb71a8333787c76fbb777fb0999fd1fcea0acfeef7a +size 91035 diff --git a/images/Shaft_00981.png b/images/Shaft_00981.png new file mode 100644 index 0000000000000000000000000000000000000000..1aa63616eab6fd36a0ae25b301decb32751324f9 --- /dev/null +++ b/images/Shaft_00981.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8516bcb2060a12ab189f7382a2df4267d1f60f837ad4371e4595dc5cc4e1e33d +size 83147 diff --git a/images/Shaft_00982.png b/images/Shaft_00982.png new file mode 100644 index 0000000000000000000000000000000000000000..900cfd4d263dc8da0db4f60a6322b9bfa1468815 --- /dev/null +++ b/images/Shaft_00982.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60fe5f456914fc96355c374310aa7cfe8abeca724b87dcb9ad9542115cf3b9fb +size 96875 diff --git a/images/Shaft_00983.png b/images/Shaft_00983.png new file mode 100644 index 0000000000000000000000000000000000000000..30d2bb29f037e87b6c148027b0ebd39e1993dcb7 --- /dev/null +++ b/images/Shaft_00983.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1be416c4062c40d05eaac5ba44fe73fcd8020d70907b96cf98a88f7bea123796 +size 101607 diff --git a/images/Shaft_00984.png b/images/Shaft_00984.png new file mode 100644 index 0000000000000000000000000000000000000000..1378fbcf2a5dd3d685a06532d267013135522a40 --- /dev/null +++ b/images/Shaft_00984.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd0fb7b96a5478d9df5700c0c8213cbd752a152f7938d379d4fe419819c1fcc1 +size 113798 diff --git a/images/Shaft_00985.png b/images/Shaft_00985.png new file mode 100644 index 0000000000000000000000000000000000000000..310799b8ae01fa49759b5bf335eb5ced521846c9 --- /dev/null +++ b/images/Shaft_00985.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4a2a667701e958048ed192889bf11ec3309db2ed278281f5b774fadf3e4d31b +size 93115 diff --git a/images/Shaft_00986.png b/images/Shaft_00986.png new file mode 100644 index 0000000000000000000000000000000000000000..4c51225406ea85a6291fdda0ef28381b718e4838 --- /dev/null +++ b/images/Shaft_00986.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d7aef8ce471c77356b2a0eb29212ade250b15ecd3c3526aa85f7a58d6520d6e +size 83144 diff --git a/images/Shaft_00987.png b/images/Shaft_00987.png new file mode 100644 index 0000000000000000000000000000000000000000..9cfdfb2b64fe9e188005a834f1d90e90322df3ab --- /dev/null +++ b/images/Shaft_00987.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c8f2049dee548384abef7d1878e0b718d1dd267561c57be61d326da2c74b4c4 +size 90748 diff --git a/images/Shaft_00988.png b/images/Shaft_00988.png new file mode 100644 index 0000000000000000000000000000000000000000..77a8ffcb5ac09c548143d96d3a5d03b639392a5c --- /dev/null +++ b/images/Shaft_00988.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae1164bb2f6d629275a4bd1db8454f359a6f61b65039d71bfeb1f23882b0d681 +size 76990 diff --git a/images/Shaft_00989.png b/images/Shaft_00989.png new file mode 100644 index 0000000000000000000000000000000000000000..85d4131dfbe057d6d3dd2b44e0b0be177d368c96 --- /dev/null +++ b/images/Shaft_00989.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1114be81ab9780604666372882904873b02de4225b6e0c3322b17dcf24e2d402 +size 94591 diff --git a/images/Shaft_00990.png b/images/Shaft_00990.png new file mode 100644 index 0000000000000000000000000000000000000000..2840532d3d695113559b5f61d8411a833991aa80 --- /dev/null +++ b/images/Shaft_00990.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ff6f5c8d8dff7c8a5bc25bbefa745bfa33bac77980110d87dbdc56c51b0a49f +size 99866 diff --git a/images/Shaft_00991.png b/images/Shaft_00991.png new file mode 100644 index 0000000000000000000000000000000000000000..e757e744fea89ae13754136d4b085f2fa13ccf5e --- /dev/null +++ b/images/Shaft_00991.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f93fc35d0cdc625a6ae659ee2de9892372ea300713cee9c0c9488853aee317f4 +size 101102 diff --git a/images/Shaft_00992.png b/images/Shaft_00992.png new file mode 100644 index 0000000000000000000000000000000000000000..9ee1c1e8ed777c411f3d00f6a38b482b2adc25ee --- /dev/null +++ b/images/Shaft_00992.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e08fc9c78ce04e2e2b04909701595c60c461839f8cac1d62e9c6fc8adbc1a135 +size 80264 diff --git a/images/Shaft_00993.png b/images/Shaft_00993.png new file mode 100644 index 0000000000000000000000000000000000000000..43558e8dfb94a329fb6c28d15d8ac9867f55ba1e --- /dev/null +++ b/images/Shaft_00993.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3397d00b257258d4f4114e913e8d125ab5fd484265dda53e3a4a7c5e417ae3c2 +size 107134 diff --git a/images/Shaft_00994.png b/images/Shaft_00994.png new file mode 100644 index 0000000000000000000000000000000000000000..66aa5a150d63a8c737c463806f19b5c02eb43889 --- /dev/null +++ b/images/Shaft_00994.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89f40fbc0f1e720705571771c66c232fa9043d7a9923df03c706d0f568410f10 +size 89697 diff --git a/images/Shaft_00995.png b/images/Shaft_00995.png new file mode 100644 index 0000000000000000000000000000000000000000..04f5ddf2cea2594cc223d5151fcd67be7e4b92c3 --- /dev/null +++ b/images/Shaft_00995.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd24c243d2a9a96e48ee1c782ce76d7182259917e97a2bb6a67f8b12bcf9f400 +size 89645 diff --git a/images/Shaft_00996.png b/images/Shaft_00996.png new file mode 100644 index 0000000000000000000000000000000000000000..55563e947f0c12404ef3c6227d05539a54d232e8 --- /dev/null +++ b/images/Shaft_00996.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f02a99530f487ecf06e0899d797b55bb65ec68702f22daa81d971a480a7bcb2 +size 75302 diff --git a/images/Shaft_00997.png b/images/Shaft_00997.png new file mode 100644 index 0000000000000000000000000000000000000000..bf7c3b82a42f49612651ed1becb21422ff49a407 --- /dev/null +++ b/images/Shaft_00997.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be15e05fcefb7d02da48737223819c00c3e73e101b890cd6fc276208cebf966d +size 92917 diff --git a/images/Shaft_00998.png b/images/Shaft_00998.png new file mode 100644 index 0000000000000000000000000000000000000000..baf1784520bcb09fccdf1acb132dbb1329d603c6 --- /dev/null +++ b/images/Shaft_00998.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4eefd0e70f51ee5e00b120caf2b4da38404a4d891c1dfa4744c87d3599d02580 +size 79141 diff --git a/images/Shaft_00999.png b/images/Shaft_00999.png new file mode 100644 index 0000000000000000000000000000000000000000..8addb30f30a6535e50c7a43461572572660357e8 --- /dev/null +++ b/images/Shaft_00999.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ace58ad6f30e8b86bd23b16bb5dbfb90491ea3eadc74a8c2282385829cc0acb +size 89697 diff --git a/images/Shaft_01000.png b/images/Shaft_01000.png new file mode 100644 index 0000000000000000000000000000000000000000..f4d114ca264a42c1e782dbb90fb7fd54c380b7f4 --- /dev/null +++ b/images/Shaft_01000.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da6cd4fb93135225922c883415f4677e9ce81a26faa934b4bef54d6868b373e6 +size 90493 diff --git a/images/Shaft_01001.png b/images/Shaft_01001.png new file mode 100644 index 0000000000000000000000000000000000000000..c2747c6c1df3f2630b544eff5c5f4055760a952c --- /dev/null +++ b/images/Shaft_01001.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7e8bb3d4a10c950a2efd68a0d2940a043fa4b5ba602abce4541e899332aeebf +size 87646 diff --git a/images/Shaft_01002.png b/images/Shaft_01002.png new file mode 100644 index 0000000000000000000000000000000000000000..dfee862a4e53ae63abd6b1f12d9b66fe63879246 --- /dev/null +++ b/images/Shaft_01002.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8633d9e4d7d6c21dd005983ed213b152c086e9451c0789a88b3a775c0de0d8f8 +size 87608 diff --git a/images/Shaft_01003.png b/images/Shaft_01003.png new file mode 100644 index 0000000000000000000000000000000000000000..a725bde29180b88834e1c4d9206675e89b2c341a --- /dev/null +++ b/images/Shaft_01003.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3746de5f5505978e668edf37e1306c6c3245bdfbfeebf23195251a95cbfa4fdb +size 97011 diff --git a/images/Shaft_01004.png b/images/Shaft_01004.png new file mode 100644 index 0000000000000000000000000000000000000000..59444197571a0c4757f08bd1d01fd670d0fc50e4 --- /dev/null +++ b/images/Shaft_01004.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fc5ec29f22c75cd5338e9ccf892251cc1186ae4184499e5f967ca810df04246 +size 109891 diff --git a/images/Shaft_01005.png b/images/Shaft_01005.png new file mode 100644 index 0000000000000000000000000000000000000000..837e9b537217c742c4e1f79878affc2f2492d439 --- /dev/null +++ b/images/Shaft_01005.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47c40ae0502732de4ea71904dbc9add76d0950c0777a17210024cb428c3f24f7 +size 108380 diff --git a/images/Shaft_01006.png b/images/Shaft_01006.png new file mode 100644 index 0000000000000000000000000000000000000000..1fba6f70db7b4e295f5476673eb596f5f1b4ef81 --- /dev/null +++ b/images/Shaft_01006.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d2fcc86970e5a934da7552ebb07ec657cde603311f818cc441d44b5f3c18d55 +size 80462 diff --git a/images/Shaft_01007.png b/images/Shaft_01007.png new file mode 100644 index 0000000000000000000000000000000000000000..109b42a4fcb1d34fbc13e4d8bd727d866800b8d6 --- /dev/null +++ b/images/Shaft_01007.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7eb7150ee3e4499cf6ede4f3c954153e4153c6bbe834d49df945272c6e052c45 +size 76409 diff --git a/images/Shaft_01008.png b/images/Shaft_01008.png new file mode 100644 index 0000000000000000000000000000000000000000..31f16d550079a78de3f028f8386e151526347d48 --- /dev/null +++ b/images/Shaft_01008.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92fcbd1f13f06466dbc881066e602ddbe3fc3e810cf3bf96b4bd0e85426e79aa +size 77561 diff --git a/images/Shaft_01009.png b/images/Shaft_01009.png new file mode 100644 index 0000000000000000000000000000000000000000..ee8504b24bfa82306f860240f5670f7e7bf0e77e --- /dev/null +++ b/images/Shaft_01009.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31322ea4ef41fa58d0c52009956bac12a6126452d326e9a894da3b1ae03ea4a4 +size 73082 diff --git a/images/Shaft_01010.png b/images/Shaft_01010.png new file mode 100644 index 0000000000000000000000000000000000000000..69a1fd11d695d934913755b57a2a920e7905c5bc --- /dev/null +++ b/images/Shaft_01010.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9961ad7e7575f43d1db20a2ef053119c9601d031dc3e40f92aa87792fa37fea9 +size 80149 diff --git a/images/Shaft_01011.png b/images/Shaft_01011.png new file mode 100644 index 0000000000000000000000000000000000000000..3e8081af33f038e2d371117a18f753b7623afeeb --- /dev/null +++ b/images/Shaft_01011.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:add6ff2a08ae36f014386de7a83eb3865155c4d554e01e00b3982ecf86694a66 +size 72303 diff --git a/images/Shaft_01012.png b/images/Shaft_01012.png new file mode 100644 index 0000000000000000000000000000000000000000..870d83f00ac430a896ef681c795939d59e98173b --- /dev/null +++ b/images/Shaft_01012.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c3efbf2d25d638ae45128aab5554d9a7acb932546986c509cff54a965cc0c22 +size 88483 diff --git a/images/Shaft_01013.png b/images/Shaft_01013.png new file mode 100644 index 0000000000000000000000000000000000000000..c27d0fabaabf5cca04d64691d4369a4e4b58fac3 --- /dev/null +++ b/images/Shaft_01013.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f450ba72339ca9f73a763da623c4117b856c2161284ee25581703e397b00b03b +size 88327 diff --git a/images/Shaft_01014.png b/images/Shaft_01014.png new file mode 100644 index 0000000000000000000000000000000000000000..3d24438cb99ea89d23ef1f78909b849df7586a3a --- /dev/null +++ b/images/Shaft_01014.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:112be1aa4be8d300a69b32fa2a288f08a06ecd329eeba7e0afea30bda7f8b2d7 +size 82641 diff --git a/images/Shaft_01015.png b/images/Shaft_01015.png new file mode 100644 index 0000000000000000000000000000000000000000..d3aba1af4d2f8a7a803be78dfeb19ca97b0a0148 --- /dev/null +++ b/images/Shaft_01015.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2190f9d34b9ba0e5fbef9353dfd8b9c3eb87d695b336e9ecb0b7a50c2708b4ae +size 72190 diff --git a/images/Shaft_01016.png b/images/Shaft_01016.png new file mode 100644 index 0000000000000000000000000000000000000000..02ce9c36afe57b1723366c6e8de8b46b1a4cc7bc --- /dev/null +++ b/images/Shaft_01016.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:280471b0dda2616de5dd9b2f9b57f4ec7aa367211c066aff98fa47be6ed358b6 +size 107762 diff --git a/images/Shaft_01017.png b/images/Shaft_01017.png new file mode 100644 index 0000000000000000000000000000000000000000..6caec43209abd107f2315d217e3212930bf0ac3b --- /dev/null +++ b/images/Shaft_01017.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89927dabb55aa46e2877bb0965bbb7af2d04eb480e5bdfc45d6bfabeea3fdc59 +size 81747 diff --git a/images/Shaft_01018.png b/images/Shaft_01018.png new file mode 100644 index 0000000000000000000000000000000000000000..30f6b5a81736850edc8dfec69b879e6800f88da4 --- /dev/null +++ b/images/Shaft_01018.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f401c812f5b78fddf043fb0e3569e9537f3e5dbf6982851531812feb94af9192 +size 83035 diff --git a/images/Shaft_01019.png b/images/Shaft_01019.png new file mode 100644 index 0000000000000000000000000000000000000000..d6f577b243eb55d1d511da79c88e1b8bd457e3fd --- /dev/null +++ b/images/Shaft_01019.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4fbebf5302374428696e17a7e00851c7c64b97ccac3cbfc17fcc223f51a35d4 +size 70093 diff --git a/images/Shaft_01020.png b/images/Shaft_01020.png new file mode 100644 index 0000000000000000000000000000000000000000..e84b8f8062e7d32fc31fc4618e6367e0f4b23ec8 --- /dev/null +++ b/images/Shaft_01020.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d508c2b88f3c610d33c1e0761da176a694b5da0b0c239c9c6cdb5bd1b5c72262 +size 96563 diff --git a/images/Shaft_01021.png b/images/Shaft_01021.png new file mode 100644 index 0000000000000000000000000000000000000000..24374a0c37e152d0bd01dadcc23d66f0d5e55c94 --- /dev/null +++ b/images/Shaft_01021.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92c3215e600327340cdb702f7973f116777c1786c161929d2f1b25cf32a1d2f0 +size 82790 diff --git a/images/Shaft_01022.png b/images/Shaft_01022.png new file mode 100644 index 0000000000000000000000000000000000000000..81dec063bafe638378be3b47f9976147e3a0e55a --- /dev/null +++ b/images/Shaft_01022.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4aa1087343bef4968821d139f0c62916346fd360cf36c8f8d716111952a5f34 +size 76654 diff --git a/images/Shaft_01023.png b/images/Shaft_01023.png new file mode 100644 index 0000000000000000000000000000000000000000..f98469c59987a981baae84d317c888494a773a4f --- /dev/null +++ b/images/Shaft_01023.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adb75725784fab775ad755703a46bcc24e45d3e352ba9db0b1a3ec6978ae2a40 +size 84348 diff --git a/images/Shaft_01024.png b/images/Shaft_01024.png new file mode 100644 index 0000000000000000000000000000000000000000..9f363448f6a7bb9d8bc72b7e59f759fdd3ce9088 --- /dev/null +++ b/images/Shaft_01024.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ebdb39c236fe11bec793761061bbe890cc303505ff70bce98d0cc2e2035bbaf +size 93699 diff --git a/images/Shaft_01025.png b/images/Shaft_01025.png new file mode 100644 index 0000000000000000000000000000000000000000..2573892f1412d50e87ea78c5bfceee5bc9bd505d --- /dev/null +++ b/images/Shaft_01025.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77ca85d2b0fb8645cf1943367ddaaa1fddcc8cbe645045b978fd7b8a283a84f1 +size 92017 diff --git a/images/Shaft_01026.png b/images/Shaft_01026.png new file mode 100644 index 0000000000000000000000000000000000000000..29af1e08089e16ab0eb1acf5af97d225563d94f5 --- /dev/null +++ b/images/Shaft_01026.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c520e0e7d8af228c74382b62935fd0f61786d3a3d6d5ea2b2576a00d9fe12444 +size 76461 diff --git a/images/Shaft_01027.png b/images/Shaft_01027.png new file mode 100644 index 0000000000000000000000000000000000000000..144068314c1a0666ac17e830a2f59091a2af7861 --- /dev/null +++ b/images/Shaft_01027.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84a308f06079ae4eb065dce88d96550ba53ba8a42b4675e59eb8bba06fe9472f +size 67861 diff --git a/images/Shaft_01028.png b/images/Shaft_01028.png new file mode 100644 index 0000000000000000000000000000000000000000..55edcca5811d6c98a1be0843d37fd038686eeb57 --- /dev/null +++ b/images/Shaft_01028.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:249ddb97daf797e3b0a7c8ae7a6c2b1b4c62872b184663a6264c71b5662f0c81 +size 106518 diff --git a/images/Shaft_01029.png b/images/Shaft_01029.png new file mode 100644 index 0000000000000000000000000000000000000000..530248a471816c5c28da576833270622928019d3 --- /dev/null +++ b/images/Shaft_01029.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcf6dd22a29e6b350b56f057e8183c74f897fb86d555238a7e95f2429f6dd8f1 +size 75842 diff --git a/images/Shaft_01030.png b/images/Shaft_01030.png new file mode 100644 index 0000000000000000000000000000000000000000..da2ee6ce7c82ff6dd4d92cad33a5217094beddb0 --- /dev/null +++ b/images/Shaft_01030.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8107d99b8cc525ac071d138c708fe4237b5c299c498266e3c4798713437cd460 +size 71046 diff --git a/images/Shaft_01031.png b/images/Shaft_01031.png new file mode 100644 index 0000000000000000000000000000000000000000..f64cb5243d62ffaf9282585e7546f49503084dd8 --- /dev/null +++ b/images/Shaft_01031.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01c472c271d4afeb74c184e00700ea62ad5fcd14fa72082d95feaaac5b6e526f +size 87822 diff --git a/images/Shaft_01032.png b/images/Shaft_01032.png new file mode 100644 index 0000000000000000000000000000000000000000..7b8c599bb52db195bc3544e1ffdcb2cd23d48948 --- /dev/null +++ b/images/Shaft_01032.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fbfb1eaf01667839186ba94f86f47eaa55aad0b6e6c79832c0db844e7d7bf77 +size 83108 diff --git a/images/Shaft_01033.png b/images/Shaft_01033.png new file mode 100644 index 0000000000000000000000000000000000000000..696c4ecae71636802364266810b15ec4c8088039 --- /dev/null +++ b/images/Shaft_01033.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fa526712d90a8a6c5337e5e6e6f9a5f43ab3c8f575a12bdae998e06c4402f65 +size 102264 diff --git a/images/Shaft_01034.png b/images/Shaft_01034.png new file mode 100644 index 0000000000000000000000000000000000000000..856599d8192981c9f16dbe80bf0fc771a87f5bf8 --- /dev/null +++ b/images/Shaft_01034.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9af92c6cd6dac195bd0eca9f47e2d18b37135953c3d25f660d95c1e61bb70f57 +size 78925 diff --git a/images/Shaft_01035.png b/images/Shaft_01035.png new file mode 100644 index 0000000000000000000000000000000000000000..f0a9bd5af05e975fb55ad5457853cad3831ffd9c --- /dev/null +++ b/images/Shaft_01035.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ff8be3a986a2c4d1dd873954ebb42fc5ad8a69f7a6c209c0b4d56691ae11bc0 +size 84756 diff --git a/images/Shaft_01036.png b/images/Shaft_01036.png new file mode 100644 index 0000000000000000000000000000000000000000..480952225aef104b6aa62e77c0f6ef439925ad7e --- /dev/null +++ b/images/Shaft_01036.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:694bbd3fa3f2cd2a811ed7b1ad6a5bdd954eacb7c3acebf5f5d8c44dd39a025e +size 69837 diff --git a/images/Shaft_01037.png b/images/Shaft_01037.png new file mode 100644 index 0000000000000000000000000000000000000000..601621911fa0e300372826d481a6843602e3d029 --- /dev/null +++ b/images/Shaft_01037.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b691f11dd04a9fb86b2159e0c96bab5d6a56b742567670da2e517e47dc0c2c8 +size 69670 diff --git a/images/Shaft_01038.png b/images/Shaft_01038.png new file mode 100644 index 0000000000000000000000000000000000000000..dc25eef5b25e975372bdf61915294b2f24e03ab3 --- /dev/null +++ b/images/Shaft_01038.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ed389f57134dc5dda005e57afdb12dbae7f99a5c6591f89aedd8ec89bb063c4 +size 81062 diff --git a/images/Shaft_01039.png b/images/Shaft_01039.png new file mode 100644 index 0000000000000000000000000000000000000000..9349491a5d2561b0b4beacdb0794240621e07067 --- /dev/null +++ b/images/Shaft_01039.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfdad4e4d748bea72c285de66574aaaa527bbfa04fd4b7e72b377831a45a3d84 +size 85522 diff --git a/images/Shaft_01040.png b/images/Shaft_01040.png new file mode 100644 index 0000000000000000000000000000000000000000..bb059469d5350faaaaa6ffc0b2ae96692f8576f7 --- /dev/null +++ b/images/Shaft_01040.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42c432a5869f6d0464cf475a0d404821208abffa841f4e41a54c606248a8f197 +size 69008 diff --git a/images/Shaft_01041.png b/images/Shaft_01041.png new file mode 100644 index 0000000000000000000000000000000000000000..2a7433d0831ca4fb4c417a8fd94da812fd1abd84 --- /dev/null +++ b/images/Shaft_01041.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5c269a46d4b95d34c76b00fa8ef73e53dd3a71182e2b6cbc9d272cec58f7439 +size 74688 diff --git a/images/Shaft_01042.png b/images/Shaft_01042.png new file mode 100644 index 0000000000000000000000000000000000000000..3465109e7d4dd8203f2fef9cf3b9c89cc40bbb8a --- /dev/null +++ b/images/Shaft_01042.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c44d1a969b17a2df2e472eadfba6df5b729171c0aad6560a6ac5a822a842d40 +size 80835 diff --git a/images/Shaft_01043.png b/images/Shaft_01043.png new file mode 100644 index 0000000000000000000000000000000000000000..c7fba7b8a0d6b1819af9430f1f49015188a70bd3 --- /dev/null +++ b/images/Shaft_01043.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c550cce95bfa8dea8ac5e6371a8e0179be16a84db55a895f49bf81949c198554 +size 90842 diff --git a/images/Shaft_01044.png b/images/Shaft_01044.png new file mode 100644 index 0000000000000000000000000000000000000000..c339116d035e605de3dc2e2c9be2ebf964fcfabe --- /dev/null +++ b/images/Shaft_01044.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ce95b65cd60350f1bc964e4b56eaca6606f069b3859debdd880e974daf81eff +size 89096 diff --git a/images/Shaft_01045.png b/images/Shaft_01045.png new file mode 100644 index 0000000000000000000000000000000000000000..242080e45a89c3a906a45b15207d023baf2589a0 --- /dev/null +++ b/images/Shaft_01045.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca25dff32358842cb146945998ab250af7f13951590f37736fc0228b094cd021 +size 69224 diff --git a/images/Shaft_01046.png b/images/Shaft_01046.png new file mode 100644 index 0000000000000000000000000000000000000000..a27668ffc188edb07634e9a7946f98431390808c --- /dev/null +++ b/images/Shaft_01046.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d81f3a37250d03fd0e3f01488ca4cde529b9f5e1499cd3a4aed0d9bec9cfec0e +size 83091 diff --git a/images/Shaft_01047.png b/images/Shaft_01047.png new file mode 100644 index 0000000000000000000000000000000000000000..3be920964b72cffe08bd1c5d1c3e60489dafb5cd --- /dev/null +++ b/images/Shaft_01047.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db2910cc30840b3d44164414b8c6ef15b09baef71445723183edce27fa9bf0f9 +size 96795 diff --git a/images/Shaft_01048.png b/images/Shaft_01048.png new file mode 100644 index 0000000000000000000000000000000000000000..275497d4bf3679d12ceb8d59d5521bb639f5a011 --- /dev/null +++ b/images/Shaft_01048.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6a28e1515cc8b8b3b250f242a5310e7a1397924d2bdb9f43fe667a778a69731 +size 83769 diff --git a/images/Shaft_01049.png b/images/Shaft_01049.png new file mode 100644 index 0000000000000000000000000000000000000000..b5976eb76507eeaa591541956b2e83193692a9c9 --- /dev/null +++ b/images/Shaft_01049.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ceea2773bca3f164b979b9b56d31eef981081f9bd5aa7c0a19d5d2f606f03d8 +size 89831 diff --git a/images/Shaft_01050.png b/images/Shaft_01050.png new file mode 100644 index 0000000000000000000000000000000000000000..76ccf83a48aa6e61c668a8547949f5b2262bd231 --- /dev/null +++ b/images/Shaft_01050.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0356d72a3a41db2a032de2392e2459bab634528a7c598c9c8cc4299ddb2f79c9 +size 90880 diff --git a/images/Shaft_01051.png b/images/Shaft_01051.png new file mode 100644 index 0000000000000000000000000000000000000000..8a528ddd95a6bf6770173a1478615ca74a4a9889 --- /dev/null +++ b/images/Shaft_01051.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0192bfd3773c067ccf7c89671acc5a31758cd79134117e1024bc442ad12839f +size 88344 diff --git a/images/Shaft_01052.png b/images/Shaft_01052.png new file mode 100644 index 0000000000000000000000000000000000000000..95654f9c75ece05886afca8a2dbff5bb99fa48d0 --- /dev/null +++ b/images/Shaft_01052.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:381d33417e87416aa21f59cbdbe06d228a07cea2e4a9b42dd1e902af9ae043c0 +size 70161 diff --git a/images/Shaft_01053.png b/images/Shaft_01053.png new file mode 100644 index 0000000000000000000000000000000000000000..7462e58afd4532564926ee06af84068c7dd3dc11 --- /dev/null +++ b/images/Shaft_01053.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6534cbf9857b028fbe2834db4dfaa0dca035fdc6ce3990c4f582f75ba3fe7c4c +size 100529 diff --git a/images/Shaft_01054.png b/images/Shaft_01054.png new file mode 100644 index 0000000000000000000000000000000000000000..d2a26054d7e6dde0ae4808258dee66f2757a39a1 --- /dev/null +++ b/images/Shaft_01054.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eca390af353e7c3dfc606e5cc4a3e3f80bf799cc7a7b14ac6cab562cb575d063 +size 84106 diff --git a/images/Shaft_01055.png b/images/Shaft_01055.png new file mode 100644 index 0000000000000000000000000000000000000000..77fd67b6482f6b5f6af176d0d0b409ce7ecce63e --- /dev/null +++ b/images/Shaft_01055.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:362111ce081e55b8430f91c76f486aaab68c6c9f67870b551c0eacdf0b60e7a4 +size 107231 diff --git a/images/Shaft_01056.png b/images/Shaft_01056.png new file mode 100644 index 0000000000000000000000000000000000000000..5e2e6dc912f0f8d35c41b2c15123f781a192f687 --- /dev/null +++ b/images/Shaft_01056.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6c3b6a318bc2168343b78568e89f74d54cdadf380142db6fe2f0b3246afca62 +size 108107 diff --git a/images/Shaft_01057.png b/images/Shaft_01057.png new file mode 100644 index 0000000000000000000000000000000000000000..c5b01a8e28b39d77db8364bc92f8e73ac031dbca --- /dev/null +++ b/images/Shaft_01057.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5655200f0d95ecbda2d87d726f2a2809e5cd435a7b1b5c9bf3f057aac53d5b88 +size 80163 diff --git a/images/Shaft_01058.png b/images/Shaft_01058.png new file mode 100644 index 0000000000000000000000000000000000000000..d196598c69ccaa29da29d80f0c3046babc1bd01d --- /dev/null +++ b/images/Shaft_01058.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09f0f978d977cf49671523b03587dba87af67163f85e4a5307d175a4c0d43af4 +size 89525 diff --git a/images/Shaft_01059.png b/images/Shaft_01059.png new file mode 100644 index 0000000000000000000000000000000000000000..ce7c9074f95737295dca211dbf3ed54593d108ac --- /dev/null +++ b/images/Shaft_01059.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54fb1f03862e4fd2bb0514c93d1fbbbbf5984776a02e2d5999c9a9022a128a26 +size 111982 diff --git a/images/Shaft_01060.png b/images/Shaft_01060.png new file mode 100644 index 0000000000000000000000000000000000000000..cab951bea1c194dde1893c2c8bc6739f18be5c49 --- /dev/null +++ b/images/Shaft_01060.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd6b4608a58e295ace717639841e21dffeb553cbac2e9c290f7e9cfb240efd27 +size 107607 diff --git a/images/Shaft_01061.png b/images/Shaft_01061.png new file mode 100644 index 0000000000000000000000000000000000000000..3a4715f837869da72a39472b6795866782fc33a9 --- /dev/null +++ b/images/Shaft_01061.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a45e34113e0d9273c825da2e930c23fc5efd7ecb2a07e55d1de452c22a7a0df +size 92010 diff --git a/images/Shaft_01062.png b/images/Shaft_01062.png new file mode 100644 index 0000000000000000000000000000000000000000..a0b93b51466e00701d4a2cdb02a48afe8533ff4e --- /dev/null +++ b/images/Shaft_01062.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df9a4227040b1fb0738e6253d0a952e1d40ec8feb173214a3f340c3c12bc1b84 +size 101980 diff --git a/images/Shaft_01063.png b/images/Shaft_01063.png new file mode 100644 index 0000000000000000000000000000000000000000..aa362a72bf9e90ad7c6a925359ea5a5a8609c80f --- /dev/null +++ b/images/Shaft_01063.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:982d2062bed03e821b40fffbeb570ad44a961371d4fb25c4faa84e3c52606d2b +size 85339 diff --git a/images/Shaft_01064.png b/images/Shaft_01064.png new file mode 100644 index 0000000000000000000000000000000000000000..c7abef9f406613ddcda8250005feb9710bc784c6 --- /dev/null +++ b/images/Shaft_01064.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cce0b3cba22796450bfe74dba8a0d40014d9adea1272b70417068b39bdeebd5c +size 81377 diff --git a/images/Shaft_01065.png b/images/Shaft_01065.png new file mode 100644 index 0000000000000000000000000000000000000000..ea5513db816925bae0909825bede73fe32bd5f83 --- /dev/null +++ b/images/Shaft_01065.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:541d60f8edd249130b7549a767174c77859ef1458de2dbba572f816a93f29de2 +size 84971 diff --git a/images/Shaft_01066.png b/images/Shaft_01066.png new file mode 100644 index 0000000000000000000000000000000000000000..95af09b99f8f04e793b1f8734ced1260fbdaa9a0 --- /dev/null +++ b/images/Shaft_01066.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e70b68cf50e2753668ae916a2dd75a8deeb66e6f062de8aced116b269b44eef3 +size 81256 diff --git a/images/Shaft_01067.png b/images/Shaft_01067.png new file mode 100644 index 0000000000000000000000000000000000000000..88f66951dda1a166e1c39103ee3dbb4a86a10aa5 --- /dev/null +++ b/images/Shaft_01067.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b7984b7a8e897276faeac074819545f464dd002568d62078ddd7f6aa17df78a +size 67533 diff --git a/images/Shaft_01068.png b/images/Shaft_01068.png new file mode 100644 index 0000000000000000000000000000000000000000..31da96eb9c857d307b7dd0fc004255cfca840b28 --- /dev/null +++ b/images/Shaft_01068.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc1a98ea8a65f5a2172cfa0855612d13ce38bc4a2f18b3554e413c8a48b401f1 +size 80663 diff --git a/images/Shaft_01069.png b/images/Shaft_01069.png new file mode 100644 index 0000000000000000000000000000000000000000..a38f928d015bfb0477534ee63d883d19f18e72b4 --- /dev/null +++ b/images/Shaft_01069.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54430744ed647aedbab1ffa6a3aa447794bd796260cdca06575476d95fee3bd7 +size 72541 diff --git a/images/Shaft_01070.png b/images/Shaft_01070.png new file mode 100644 index 0000000000000000000000000000000000000000..2be704146831c2ceac599bae351fab983d6f68a6 --- /dev/null +++ b/images/Shaft_01070.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fc613cdf29b05d965919533806f1dafebd4f09e6c68ec0fd13491d097c77b80 +size 91637 diff --git a/images/Shaft_01071.png b/images/Shaft_01071.png new file mode 100644 index 0000000000000000000000000000000000000000..ef8c62c10bacf1f5515e4388187c7e9f380e31f6 --- /dev/null +++ b/images/Shaft_01071.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f1699962099ca22b305211cfafb676d32b0c8ae7754d43826a2353582fc6fa8 +size 87076 diff --git a/images/Shaft_01072.png b/images/Shaft_01072.png new file mode 100644 index 0000000000000000000000000000000000000000..2ad610f092e318af6a48239ef32138e247e2ab3d --- /dev/null +++ b/images/Shaft_01072.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:543ba34d2b6eb1fd5ea7963b69a7374fdafed5923ae4d58a0a57091cedc35d35 +size 82659 diff --git a/images/Shaft_01073.png b/images/Shaft_01073.png new file mode 100644 index 0000000000000000000000000000000000000000..fb08db5adf570682ed125705871134213902022e --- /dev/null +++ b/images/Shaft_01073.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a5ea2c1ae3ab1a29427cc02fbb143919250a15737f7e05d283e8d26ff7fa908 +size 83633 diff --git a/images/Shaft_01074.png b/images/Shaft_01074.png new file mode 100644 index 0000000000000000000000000000000000000000..b858b404dc2bc0459f3dcf49aa6907df689a79b7 --- /dev/null +++ b/images/Shaft_01074.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebbbdf41065dc714587acc6d670736e6a1028a2aa08fdb7d1a0c2bb1260a30d8 +size 96845 diff --git a/images/Shaft_01075.png b/images/Shaft_01075.png new file mode 100644 index 0000000000000000000000000000000000000000..586c4b858508e22078e9a81234bf6d3f7059e48a --- /dev/null +++ b/images/Shaft_01075.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8583f9bf77fbbe918548287b40593d4f706cf453cb9d471d093eceddd06fc12 +size 69310 diff --git a/images/Shaft_01076.png b/images/Shaft_01076.png new file mode 100644 index 0000000000000000000000000000000000000000..e3d2cccea806d539c3fb181a3ca9d55900110f1a --- /dev/null +++ b/images/Shaft_01076.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14efbf7c7a2b6bbd2704f8098a13b4b7c9c58a8d10b9e7b9193c75d5d2a65c66 +size 75655 diff --git a/images/Shaft_01077.png b/images/Shaft_01077.png new file mode 100644 index 0000000000000000000000000000000000000000..d6a8e923a6771f9d27d39073ef76be96a7b06cc4 --- /dev/null +++ b/images/Shaft_01077.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4025b4f4c9c416d88ca9d3ab86619f95d130a50636e286e18491dd023e722540 +size 94777 diff --git a/images/Shaft_01078.png b/images/Shaft_01078.png new file mode 100644 index 0000000000000000000000000000000000000000..253f144b63a410e1a6d3635cae0382d7b4baa279 --- /dev/null +++ b/images/Shaft_01078.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5e6d7a3476a9be14ec6370a5473b41e30e941c36addd3add7b63dbfe9bee4e0 +size 101726 diff --git a/images/Shaft_01079.png b/images/Shaft_01079.png new file mode 100644 index 0000000000000000000000000000000000000000..ec55719bcc2cf319bfe82a85c1cb300cda8d38dd --- /dev/null +++ b/images/Shaft_01079.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08f4b27b312ea47e2c9212b08da745cbc2e4210eb7222653d35d9fcb23c87e09 +size 110650 diff --git a/images/Shaft_01080.png b/images/Shaft_01080.png new file mode 100644 index 0000000000000000000000000000000000000000..ce1b33f71e5101f40419c103ea795124c7d9e911 --- /dev/null +++ b/images/Shaft_01080.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2068ff62d06b3ff0650dfde52ca343280611ab9c4a0c7d8a14e137cb27b1e62 +size 106318 diff --git a/images/Shaft_01081.png b/images/Shaft_01081.png new file mode 100644 index 0000000000000000000000000000000000000000..00d3ca1ab09c094fbd50f56c418b4faea0968456 --- /dev/null +++ b/images/Shaft_01081.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df1e3cb29cbf2acf9d75d0aaa4ee3419e4de2be1d62601ae4b568f6ff26a5aaf +size 84019 diff --git a/images/Shaft_01082.png b/images/Shaft_01082.png new file mode 100644 index 0000000000000000000000000000000000000000..f47db75ec6abb6adbeacda60ab88c1e909b7bb44 --- /dev/null +++ b/images/Shaft_01082.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47fbe77340caad59114363a5e1a08dceccf555eea9df6abe3f25f25d72cd4d02 +size 96772 diff --git a/images/Shaft_01083.png b/images/Shaft_01083.png new file mode 100644 index 0000000000000000000000000000000000000000..4837ac82fd64a2313e720e886ca05868d05c2e0c --- /dev/null +++ b/images/Shaft_01083.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0be422e3a64ee993fb1d2843e8467a885b844599c0deb31f7b2676eecb0a50c +size 92842 diff --git a/images/Shaft_01084.png b/images/Shaft_01084.png new file mode 100644 index 0000000000000000000000000000000000000000..c3892da5a1b8f209c062c4e6e5c1ea6c8d7e4224 --- /dev/null +++ b/images/Shaft_01084.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0363d5de807e1ac735fb18aebfebcf47c6e4e66e63274208ea20dda58f158a82 +size 81060 diff --git a/images/Shaft_01085.png b/images/Shaft_01085.png new file mode 100644 index 0000000000000000000000000000000000000000..ea0a445a32981b41ba2fa17ebe020ad6e7b51a4c --- /dev/null +++ b/images/Shaft_01085.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20446217c20a7885281d8e2f317bd13ff78dd373c6253bde95ce26fc79a4b002 +size 84922 diff --git a/images/Shaft_01086.png b/images/Shaft_01086.png new file mode 100644 index 0000000000000000000000000000000000000000..61750555cede5a150d6fec82bef4fdd51bf95608 --- /dev/null +++ b/images/Shaft_01086.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:679ff872cf0a3409acdff13cac037c7f97398cffa965ad31f5a69dcee6508f90 +size 94533 diff --git a/images/Shaft_01087.png b/images/Shaft_01087.png new file mode 100644 index 0000000000000000000000000000000000000000..50ec6a53b85bbcf8f0e7f6667d9719984ec56205 --- /dev/null +++ b/images/Shaft_01087.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de57e0b347892ad1625a0e767e22e08a505c11f266996c5b9cf056d478ec340b +size 72916 diff --git a/images/Shaft_01088.png b/images/Shaft_01088.png new file mode 100644 index 0000000000000000000000000000000000000000..b86ed4e165e51448c9607ea8eed16fabef746019 --- /dev/null +++ b/images/Shaft_01088.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93ef935af828bcafb3fb48eb51f314006b11f10292a9e9370e935adeacf0b9d2 +size 95173 diff --git a/images/Shaft_01089.png b/images/Shaft_01089.png new file mode 100644 index 0000000000000000000000000000000000000000..b73f56713ed41e6c538cfbfff1f7e271d1e0aaf1 --- /dev/null +++ b/images/Shaft_01089.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6b1730f99078fd2c52ae8e042bcf2fd53c2b3ecbeb870bd8913498d0774d87c +size 91722 diff --git a/images/Shaft_01090.png b/images/Shaft_01090.png new file mode 100644 index 0000000000000000000000000000000000000000..bbcea15ef5c9d11f7ad115585491061bacb9e459 --- /dev/null +++ b/images/Shaft_01090.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c515030a1c28d53d290f466e84700fdcc8af9dd4efda10a8158842482bbb6b5 +size 111770 diff --git a/images/Shaft_01091.png b/images/Shaft_01091.png new file mode 100644 index 0000000000000000000000000000000000000000..2c4d7a916c162b93ba9f517b18029029586b79e8 --- /dev/null +++ b/images/Shaft_01091.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a436b520879689794f7f73d49f2a63576fe13ca9e51714504dcd6e14403dcd44 +size 74404 diff --git a/images/Shaft_01092.png b/images/Shaft_01092.png new file mode 100644 index 0000000000000000000000000000000000000000..93a47ec0554380d28acf09452666f0132f2ac9b4 --- /dev/null +++ b/images/Shaft_01092.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0274d008f6d0cb30d62568ee5d4753b895ab8cd9c24623b3d1ac0e5fb4fb69af +size 68659 diff --git a/images/Shaft_01093.png b/images/Shaft_01093.png new file mode 100644 index 0000000000000000000000000000000000000000..70f86b39353c6958b82f4e237cd697cb2c2a03cd --- /dev/null +++ b/images/Shaft_01093.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:545e3a1104875bedd793616354dab6d92cbb5784007edf88eb247ba6ae5d040f +size 69340 diff --git a/images/Shaft_01094.png b/images/Shaft_01094.png new file mode 100644 index 0000000000000000000000000000000000000000..da0c5a9cbb5ab98901ffcf37e8b64a5ef3f2ee4a --- /dev/null +++ b/images/Shaft_01094.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8cf83d35860662536fc71eca1ea9072fa2e9c6ca59f462b58a6dd9dce532c32 +size 92074 diff --git a/images/Shaft_01095.png b/images/Shaft_01095.png new file mode 100644 index 0000000000000000000000000000000000000000..2f6bae5efdf942c2d65b774b131fca54940c9cce --- /dev/null +++ b/images/Shaft_01095.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3abd495c482deab6dd29548f0b44db5706c91ab46a021974a54d2e2ccdd04422 +size 82139 diff --git a/images/Shaft_01096.png b/images/Shaft_01096.png new file mode 100644 index 0000000000000000000000000000000000000000..82dcd09c17605cb21cafa99c6ae89b45fd332676 --- /dev/null +++ b/images/Shaft_01096.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa40a2f1234b77bf260156477d44b27f67053a5449d158cc38a1f4f315e33247 +size 90514 diff --git a/images/Shaft_01097.png b/images/Shaft_01097.png new file mode 100644 index 0000000000000000000000000000000000000000..7b30894037fe5064d915e654afee839bc5985365 --- /dev/null +++ b/images/Shaft_01097.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c947591bf4f3ddf7d51ed525aac69a5f25dfe80a7d877dd183c2654b1cae1bd +size 88063 diff --git a/images/Shaft_01098.png b/images/Shaft_01098.png new file mode 100644 index 0000000000000000000000000000000000000000..6e1e7a750f8950623d8309d7b6f7331e81c4eeb3 --- /dev/null +++ b/images/Shaft_01098.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:063c6f60d58860245064650565c01b3bd91f1c01a6b37d36ce648bdabbf0b8d4 +size 90735 diff --git a/images/Shaft_01099.png b/images/Shaft_01099.png new file mode 100644 index 0000000000000000000000000000000000000000..18daff35d303f26e47df226fe8a9ef220511cee6 --- /dev/null +++ b/images/Shaft_01099.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22a2162ca472fbb963294c55d055170bb7a67d1998163e3cbcdd5ddae77c644e +size 78754 diff --git a/images/Shaft_01100.png b/images/Shaft_01100.png new file mode 100644 index 0000000000000000000000000000000000000000..7115cbe1c5841276a81fcd6af177a70f90c2a2ca --- /dev/null +++ b/images/Shaft_01100.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39f1ddd3d09cb7709771f540b7b2fa607dae445a23f6b81a05094c1420a20de5 +size 77396 diff --git a/images/Shaft_01101.png b/images/Shaft_01101.png new file mode 100644 index 0000000000000000000000000000000000000000..482793b5c60cf3b07db37d31fb9f435f96efd804 --- /dev/null +++ b/images/Shaft_01101.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55ce2705df6cd3998735b39897e579369bb807f592c4250e69875c2d16d3bf98 +size 83208 diff --git a/images/Shaft_01102.png b/images/Shaft_01102.png new file mode 100644 index 0000000000000000000000000000000000000000..85cd98fddc43b34d58ea6303acee7c03fd74e32a --- /dev/null +++ b/images/Shaft_01102.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2dc84d07116d71b8ad67fd79ecad2d81a164d527b6aeda2d915bf8e55be9c5d7 +size 89695 diff --git a/images/Shaft_01103.png b/images/Shaft_01103.png new file mode 100644 index 0000000000000000000000000000000000000000..0ba60ddf5c10d836e565030101cbf73a7fe47919 --- /dev/null +++ b/images/Shaft_01103.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fcd858b1d70531c7576ff7dd2871e1d27d817d3ca2c083d71d560de8e3e33ae +size 111782 diff --git a/images/Shaft_01104.png b/images/Shaft_01104.png new file mode 100644 index 0000000000000000000000000000000000000000..ba9ed9bd3925d520b54ebe690595741de52266b9 --- /dev/null +++ b/images/Shaft_01104.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49a0e68ff3d19b218040917902f608c1319cc8175533310fb43f852388177e3d +size 90622 diff --git a/images/Shaft_01105.png b/images/Shaft_01105.png new file mode 100644 index 0000000000000000000000000000000000000000..3f039a356c406dcef7a82aa539b80ac14df90257 --- /dev/null +++ b/images/Shaft_01105.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbf5ef7f15f2ca4be5d3822af84b388df390c8a43f295787d0d2f8f004bba37c +size 80548 diff --git a/images/Shaft_01106.png b/images/Shaft_01106.png new file mode 100644 index 0000000000000000000000000000000000000000..d9dead26c0b567dddfbeff4f1d72ba88e510dcd1 --- /dev/null +++ b/images/Shaft_01106.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c55b4b2d113c2091f5ad554b5d616b6ffbf6969862383c7ddce73038a6f2b0e +size 70884 diff --git a/images/Shaft_01107.png b/images/Shaft_01107.png new file mode 100644 index 0000000000000000000000000000000000000000..28046de6c72aa5890d2a0f95a59e7d2dcaad67d2 --- /dev/null +++ b/images/Shaft_01107.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b200b53d677d595a50762b8c4fb31a09fdfb975e0eb5e8d328b277ecf099b8d2 +size 67810 diff --git a/images/Shaft_01108.png b/images/Shaft_01108.png new file mode 100644 index 0000000000000000000000000000000000000000..bf36d82728666d7d61726b11581d9a2f7eb1891b --- /dev/null +++ b/images/Shaft_01108.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b974929cbc2f82b942437726e06e54254110a79ef6372b3622eb31df42b928f4 +size 66999 diff --git a/images/Shaft_01109.png b/images/Shaft_01109.png new file mode 100644 index 0000000000000000000000000000000000000000..345a88276d4d245612c7059d7f75ee66f43b4f74 --- /dev/null +++ b/images/Shaft_01109.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f268b7449d3a2ff9a47180879ec643df68a1ec60f1a7e8b66b7b72d4812a1f07 +size 90378 diff --git a/images/Shaft_01110.png b/images/Shaft_01110.png new file mode 100644 index 0000000000000000000000000000000000000000..ba717e6804d109c9715478f4390515f3dfe16c8e --- /dev/null +++ b/images/Shaft_01110.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32d128b2145374499fa9932a3ae87dc56231ce731534b8c8141925e3f77bdee4 +size 66712 diff --git a/images/Shaft_01111.png b/images/Shaft_01111.png new file mode 100644 index 0000000000000000000000000000000000000000..725e2266260416259e53c2670abcfa827370b9eb --- /dev/null +++ b/images/Shaft_01111.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e416d6290d65f5b0db28778834bec6d82fe198f9779de5150c99f1417097a826 +size 71807 diff --git a/images/Shaft_01112.png b/images/Shaft_01112.png new file mode 100644 index 0000000000000000000000000000000000000000..7b946765b2831519b66cac1f9cd7283b1a8111ec --- /dev/null +++ b/images/Shaft_01112.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:811a281a5345bd63e1b1b557bbab91ce6797f79cdfcb010c0d4d833325fa0360 +size 88916 diff --git a/images/Shaft_01113.png b/images/Shaft_01113.png new file mode 100644 index 0000000000000000000000000000000000000000..76fce84680b0b07df28f6c953f91ae2491e990fd --- /dev/null +++ b/images/Shaft_01113.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4aaab44da7e9f21d6b58d56f775f1656f690d064177238016b5a9c6439576d7 +size 69925 diff --git a/images/Shaft_01114.png b/images/Shaft_01114.png new file mode 100644 index 0000000000000000000000000000000000000000..d79dd388d5349f9e9c29e3667f8acc64c2c693f0 --- /dev/null +++ b/images/Shaft_01114.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:489b42e4d1652ca5e6df2cb23080bfe60f35ab1c42281ea210a6a7195a6c6cdc +size 110565 diff --git a/images/Shaft_01115.png b/images/Shaft_01115.png new file mode 100644 index 0000000000000000000000000000000000000000..20113cf5697e30fca20d81971ff885dd30ea9231 --- /dev/null +++ b/images/Shaft_01115.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b91510e63012e9d83885b6f03ec350ae40b449b4202f305a7bfa62070d2eb9b +size 65836 diff --git a/images/Shaft_01116.png b/images/Shaft_01116.png new file mode 100644 index 0000000000000000000000000000000000000000..f8ca09911d18ea08db6f339eab25810e5db7de15 --- /dev/null +++ b/images/Shaft_01116.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:285994dc1e652243fd6661d740a2add492798be5727ba691f7adeba0811181c6 +size 84848 diff --git a/images/Shaft_01117.png b/images/Shaft_01117.png new file mode 100644 index 0000000000000000000000000000000000000000..19202bf2cc427cce6fc67b6d1a341ff388179c34 --- /dev/null +++ b/images/Shaft_01117.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f36a18dede823c1523c34bf148d3abc831aa4bb50158dccab7fb71c4364e813 +size 102724 diff --git a/images/Shaft_01118.png b/images/Shaft_01118.png new file mode 100644 index 0000000000000000000000000000000000000000..8fb4eb3bfc6e00c53fe9e6731e1e35e1ea5225fd --- /dev/null +++ b/images/Shaft_01118.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26b867a1af76696551223884ac52098e455b922832c195668b36e1150f925f4d +size 72415 diff --git a/images/Shaft_01119.png b/images/Shaft_01119.png new file mode 100644 index 0000000000000000000000000000000000000000..2f1afc4d9a6ed8346b9ee61ef43f4edc2e1beefa --- /dev/null +++ b/images/Shaft_01119.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f733f0780a0a13374c3d2a66f02fa575498976f37e713af4e0ad064735d9fcb +size 93151 diff --git a/images/Shaft_01120.png b/images/Shaft_01120.png new file mode 100644 index 0000000000000000000000000000000000000000..7be9e8698409032b38e11eecbfb0a66076cb58f5 --- /dev/null +++ b/images/Shaft_01120.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ede14bacf4957916ccc8f8a93ea994baa3d1ae45f4c9f12ebd26b403b657a321 +size 92947 diff --git a/images/Shaft_01121.png b/images/Shaft_01121.png new file mode 100644 index 0000000000000000000000000000000000000000..3b056e3dfd169e5e40242fc8a36f30e6933e5d2f --- /dev/null +++ b/images/Shaft_01121.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ee13d02f48ccdded6d808f0809c9e9bbcd06d0d1423dd97c5ee77f7ed98b2cd +size 69154 diff --git a/images/Shaft_01122.png b/images/Shaft_01122.png new file mode 100644 index 0000000000000000000000000000000000000000..6da1dbbf9b2eaa99e04a4568dec9cef9904e3565 --- /dev/null +++ b/images/Shaft_01122.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9cef925f36e10881d1e35cfcb16bb73682ae29927862c0c06509748ee655498 +size 117646 diff --git a/images/Shaft_01123.png b/images/Shaft_01123.png new file mode 100644 index 0000000000000000000000000000000000000000..79be4344364e9b371cb4fbf6e140e9d2423bb6ee --- /dev/null +++ b/images/Shaft_01123.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e73e526917105d32ab9a83c63dfc06b770196fddd7f87b61dfa5ba3d2b3bdccb +size 83288 diff --git a/images/Shaft_01124.png b/images/Shaft_01124.png new file mode 100644 index 0000000000000000000000000000000000000000..6b7c65724806f6fd7ba36fcc16e8de0bba1faee9 --- /dev/null +++ b/images/Shaft_01124.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25e5eb2cda92b905ad21de15bfcff4159a021eeaa9e3a05108935e9f9c9f067e +size 77276 diff --git a/images/Shaft_01125.png b/images/Shaft_01125.png new file mode 100644 index 0000000000000000000000000000000000000000..da3a25788dfcdac1124c3086e78289a6351d7e70 --- /dev/null +++ b/images/Shaft_01125.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55d5897d7c3832228b561b061f3ebe123c813bb181ed9b2d68e8999572279497 +size 87939 diff --git a/images/Shaft_01126.png b/images/Shaft_01126.png new file mode 100644 index 0000000000000000000000000000000000000000..812756adcb2edce675b1ccadfab40ebaaa8beba7 --- /dev/null +++ b/images/Shaft_01126.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0734543df14b60dd25c2945b3d6d588f70bcde966a088782813db00b5575891b +size 79174 diff --git a/images/Shaft_01127.png b/images/Shaft_01127.png new file mode 100644 index 0000000000000000000000000000000000000000..f79cd61310b7fc1c44afa7cb2f8c0f09e19b7e9d --- /dev/null +++ b/images/Shaft_01127.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe9d9af7e8f10e05054a9c1bb541aaa16dd131289d7ba845cb7289a66d8c48eb +size 71845 diff --git a/images/Shaft_01128.png b/images/Shaft_01128.png new file mode 100644 index 0000000000000000000000000000000000000000..287f8fd3b8fb638a12dda25c70c223ca3ac03d07 --- /dev/null +++ b/images/Shaft_01128.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8659488345a2f2380437c9d34ec6e7a4dc99b144de658ba7f43ccfa933bbef93 +size 108513 diff --git a/images/Shaft_01129.png b/images/Shaft_01129.png new file mode 100644 index 0000000000000000000000000000000000000000..06d2a66f4709b102e7f05d83b14affaae9a89b4e --- /dev/null +++ b/images/Shaft_01129.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c49d648f42dc40a88538c27188b330825e2ad29264ae2d811532cc5035af014d +size 83651 diff --git a/images/Shaft_01130.png b/images/Shaft_01130.png new file mode 100644 index 0000000000000000000000000000000000000000..c215508d28f332332b548f3e751465651a90a4c6 --- /dev/null +++ b/images/Shaft_01130.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c4c460fe1aab2113583619e688be3561caab273deee2b1d02b94c2accd3e899 +size 93593 diff --git a/images/Shaft_01131.png b/images/Shaft_01131.png new file mode 100644 index 0000000000000000000000000000000000000000..9628b0b9fc1e90fca349fbd8c52a412f7dd07a38 --- /dev/null +++ b/images/Shaft_01131.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efb57c5aab7a285c58ee7062f69a1b6af3032708a69458e4f26e45b158a06c11 +size 87213 diff --git a/images/Shaft_01132.png b/images/Shaft_01132.png new file mode 100644 index 0000000000000000000000000000000000000000..ced51d89dc456584cf8b4a1c8df620f84f9a8bca --- /dev/null +++ b/images/Shaft_01132.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f34bd39c0b6fd39363434c1fde56f8c77ee754bb21121ea13d9ff4fbcd1b96de +size 77065 diff --git a/images/Shaft_01133.png b/images/Shaft_01133.png new file mode 100644 index 0000000000000000000000000000000000000000..e8b1249c9137762c87d08f374358805323bebdd1 --- /dev/null +++ b/images/Shaft_01133.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:523852082f4e8d37542b4c7e1dfef8269187bdff8d5d3875e864ae331b631765 +size 79060 diff --git a/images/Shaft_01134.png b/images/Shaft_01134.png new file mode 100644 index 0000000000000000000000000000000000000000..e2313c42b7fe923f6d62b04a1c08ed407e8b1e9d --- /dev/null +++ b/images/Shaft_01134.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ea604ba28c2391f90930b334a37a2649c32c623829ac31f6b4d54fe753a3f4e +size 82701 diff --git a/images/Shaft_01135.png b/images/Shaft_01135.png new file mode 100644 index 0000000000000000000000000000000000000000..d79c27a3423283993347b123f8efcd0a36aeef46 --- /dev/null +++ b/images/Shaft_01135.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6078129c6ae0840e52f6c8fb96a65437f568600f0bb7ed3b1487fa28c9638d60 +size 109523 diff --git a/images/Shaft_01136.png b/images/Shaft_01136.png new file mode 100644 index 0000000000000000000000000000000000000000..08b38004cdcaf03c576815b1ebc9eb0924bdde54 --- /dev/null +++ b/images/Shaft_01136.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34938aa77799ab0e06a50dc3e69f80deb7a7840c8dee7d041004a72c90f6bf8c +size 70937 diff --git a/images/Shaft_01137.png b/images/Shaft_01137.png new file mode 100644 index 0000000000000000000000000000000000000000..ece87a4b4a1bebbdc44e6a8d95e9ada8d6344c5a --- /dev/null +++ b/images/Shaft_01137.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:469f97f74904317aa0b55fb9390932dbe01ac749382df69460aa437f109caba5 +size 86203 diff --git a/images/Shaft_01138.png b/images/Shaft_01138.png new file mode 100644 index 0000000000000000000000000000000000000000..c064d37a3a2d0e6e451048b4cd0b7bed311279c9 --- /dev/null +++ b/images/Shaft_01138.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6664d1a9c2925022f7d50baea9ad11c362eb882cd9b8d1ce900a9f672514d6c +size 69170 diff --git a/images/Shaft_01139.png b/images/Shaft_01139.png new file mode 100644 index 0000000000000000000000000000000000000000..c4b16ef8002610557dabd3c4886cf507cbdc0a17 --- /dev/null +++ b/images/Shaft_01139.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c554b3ede1a8142899f5854211d9a6ee2ede69bc20e8fe08b1cd01babc3d13a0 +size 79156 diff --git a/images/Shaft_01140.png b/images/Shaft_01140.png new file mode 100644 index 0000000000000000000000000000000000000000..426c1f5fad4f8c95f9f8a1d131b3334bc0b6cb14 --- /dev/null +++ b/images/Shaft_01140.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6faaa099495774363114f8686e76e432d2ad4efac1b99a43e9e52edcadb913e +size 81479 diff --git a/images/Shaft_01141.png b/images/Shaft_01141.png new file mode 100644 index 0000000000000000000000000000000000000000..fb0bc23d5b867af8014d5bc530c2871a1c1cf7df --- /dev/null +++ b/images/Shaft_01141.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb8ee42c8c1cb161afd905eb84a1c3c640db72f7ff5fe45077dfefbeddcc848e +size 84592 diff --git a/images/Shaft_01142.png b/images/Shaft_01142.png new file mode 100644 index 0000000000000000000000000000000000000000..498713c73c8494eac6ddb1db64eca01bd8fff8da --- /dev/null +++ b/images/Shaft_01142.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1514a81cc63481b5a14d38439b1502a01974ccdc1bb971ccfb8bd951059c72e8 +size 71191 diff --git a/images/Shaft_01143.png b/images/Shaft_01143.png new file mode 100644 index 0000000000000000000000000000000000000000..29a7f8522a891f4455e7dcd02797b0d28cebfabf --- /dev/null +++ b/images/Shaft_01143.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2ea0e5e01eaeeb918e56422031010993ebfe66f499922a11a5eb8de9d5339ae +size 79227 diff --git a/images/Shaft_01144.png b/images/Shaft_01144.png new file mode 100644 index 0000000000000000000000000000000000000000..e8ac1752a6de298382d95dd1bdf775a70ed6ab30 --- /dev/null +++ b/images/Shaft_01144.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe168edd2ad2f8f5a01619188ecb2fc300c0bfc2549647b5c687aeec6881efe2 +size 89421 diff --git a/images/Shaft_01145.png b/images/Shaft_01145.png new file mode 100644 index 0000000000000000000000000000000000000000..ad40d5437583dbc9b39d655592cf2b8878cd136c --- /dev/null +++ b/images/Shaft_01145.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a43f4107555d8b571bda9444ecf51928429e8d141da389251bb565d2e559e9df +size 79810 diff --git a/images/Shaft_01146.png b/images/Shaft_01146.png new file mode 100644 index 0000000000000000000000000000000000000000..4eaa0c2b38a5100de6e929996feec3c27a587f14 --- /dev/null +++ b/images/Shaft_01146.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f16d3744f17bb8367f68ee37755d5182623e3bd9d3db89f5c64d3e8f912fe12 +size 85975 diff --git a/images/Shaft_01147.png b/images/Shaft_01147.png new file mode 100644 index 0000000000000000000000000000000000000000..0efea488ecc99f7a98bc0073fdbd1c5f62df1f8a --- /dev/null +++ b/images/Shaft_01147.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57da5bf739eb915b2ce59ea7b3e1a214cda611de0f51a9fbb66ffb43a85cf4dd +size 97827 diff --git a/images/Shaft_01148.png b/images/Shaft_01148.png new file mode 100644 index 0000000000000000000000000000000000000000..e7fd23681ef665f00a86492fd6af79f77e1de895 --- /dev/null +++ b/images/Shaft_01148.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a04fe9b7124e067964e151969eac9cdcf9fc4fe3607552290f7846ad5a8d56eb +size 81793 diff --git a/images/Shaft_01149.png b/images/Shaft_01149.png new file mode 100644 index 0000000000000000000000000000000000000000..3efe8477b8172c824adb7c842f119eb80c8e1ebf --- /dev/null +++ b/images/Shaft_01149.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2bc7f0fa00372eaee44dafeaf13e698b8d4729538602f7e003808354f1a1051 +size 87801 diff --git a/images/Shaft_01150.png b/images/Shaft_01150.png new file mode 100644 index 0000000000000000000000000000000000000000..1eb32065ca8085de852c5f8a5bf337fec5e04c98 --- /dev/null +++ b/images/Shaft_01150.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91b4d5c2005ad9a8e1efa59c61c6089630380a370cadc240b0d42e7c04c784aa +size 68503 diff --git a/images/Shaft_01151.png b/images/Shaft_01151.png new file mode 100644 index 0000000000000000000000000000000000000000..0cb3da4569693dcb8aadd4feee050cb3410162aa --- /dev/null +++ b/images/Shaft_01151.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7292e1ed259f6cc194c86aa4e5e1c4dcce8f5209e93de30adb1623591e87ee5 +size 66194 diff --git a/images/Shaft_01152.png b/images/Shaft_01152.png new file mode 100644 index 0000000000000000000000000000000000000000..bb67406215770378cd101adb5d4128760d88d4fd --- /dev/null +++ b/images/Shaft_01152.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6be5ff1b8cdc07be5b03f88c50ebc924013bf2375eb3d0fc0f5d2c9a390b8a0 +size 72436 diff --git a/images/Shaft_01153.png b/images/Shaft_01153.png new file mode 100644 index 0000000000000000000000000000000000000000..1265bb32adbe8718a586e0d7b6523cc97caaaa86 --- /dev/null +++ b/images/Shaft_01153.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b42e38cc3c2c7891d239f794ae476c249c59583f2dd22cb09c83c472848aaa09 +size 81408 diff --git a/images/Shaft_01154.png b/images/Shaft_01154.png new file mode 100644 index 0000000000000000000000000000000000000000..61a006a4447cf956b41e0b7cf73dd927158c41b9 --- /dev/null +++ b/images/Shaft_01154.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d19a28116f291fc339ac24d90edf5edf0155c0af55749ae721b2a9a7f591eb9 +size 75396 diff --git a/images/Shaft_01155.png b/images/Shaft_01155.png new file mode 100644 index 0000000000000000000000000000000000000000..b65d667e52ab6969fdd1f211b2595f41be48ae40 --- /dev/null +++ b/images/Shaft_01155.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffb1a76b0a0011e421db284db4e1fbfa337088551402967b8ce41f15a7296003 +size 80860 diff --git a/images/Shaft_01156.png b/images/Shaft_01156.png new file mode 100644 index 0000000000000000000000000000000000000000..8057b43874556905b1701925e6b5b589bd382cf6 --- /dev/null +++ b/images/Shaft_01156.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df9cbf7ff53a52709bf27c92294e7ae0adf337e4ddb549a8fd94c3b86a4a4abd +size 82808 diff --git a/images/Shaft_01157.png b/images/Shaft_01157.png new file mode 100644 index 0000000000000000000000000000000000000000..8bbe1b70474e9a7c48e02988c8a94a2cabd17c42 --- /dev/null +++ b/images/Shaft_01157.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b308fc2b16fa2f986010e5012ffdb3b1cbfbdb685b6518047a5a26a21156c6af +size 82462 diff --git a/images/Shaft_01158.png b/images/Shaft_01158.png new file mode 100644 index 0000000000000000000000000000000000000000..b336ddcfbc79b286d95fa43066282a3b81cba6ee --- /dev/null +++ b/images/Shaft_01158.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d12cde4180b8e03f3d9b26ec6ccabe29ed85be323616958bf664d95382a0016e +size 78772 diff --git a/images/Shaft_01159.png b/images/Shaft_01159.png new file mode 100644 index 0000000000000000000000000000000000000000..0332da47e4955db1390f9c0fdaba2a7e7a30c8cd --- /dev/null +++ b/images/Shaft_01159.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70d595ca1daa5055491f794b2ed435a6abad23754adf82e27daadd9ec9df63d6 +size 92507 diff --git a/images/Shaft_01160.png b/images/Shaft_01160.png new file mode 100644 index 0000000000000000000000000000000000000000..0df6bf9509668296e4f2cfa40757fcce306dad09 --- /dev/null +++ b/images/Shaft_01160.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1eb6b19e62281bc6332397a54723aefec4cde51f303fa87e00e228d8c4157675 +size 87290 diff --git a/images/Shaft_01161.png b/images/Shaft_01161.png new file mode 100644 index 0000000000000000000000000000000000000000..3627664be30234f8232cea284374acf54ffb2455 --- /dev/null +++ b/images/Shaft_01161.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f28566abf0ec83e4e385443337b575d2ba2d15a950f347f06d2812f51b1dba2f +size 72479 diff --git a/images/Shaft_01162.png b/images/Shaft_01162.png new file mode 100644 index 0000000000000000000000000000000000000000..b8a7f93e0afb9ad81b7ab76be8d969c6d77094c9 --- /dev/null +++ b/images/Shaft_01162.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:411045952ce9239dcf67c6aac3f39b7552f96dee82a82769cc37929ad23f3f60 +size 105433 diff --git a/images/Shaft_01163.png b/images/Shaft_01163.png new file mode 100644 index 0000000000000000000000000000000000000000..4a9f15c443e02152158781bd7c3aa03ae9d0dffd --- /dev/null +++ b/images/Shaft_01163.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaf6f223116eda93156cd8f20074d0da400cce0d012a0de17abda343ff90a657 +size 87281 diff --git a/images/Shaft_01164.png b/images/Shaft_01164.png new file mode 100644 index 0000000000000000000000000000000000000000..47b9fd7fdb2fbb7b69981f0ecb8babde33c8aecb --- /dev/null +++ b/images/Shaft_01164.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4ce32fd8db16e1938bebb3cdf166f89aafc35b933832cdfc29bdc78894f19a8 +size 87398 diff --git a/images/Shaft_01165.png b/images/Shaft_01165.png new file mode 100644 index 0000000000000000000000000000000000000000..8b9ca003a12688ac56df01d78c3f7850c3d18ae3 --- /dev/null +++ b/images/Shaft_01165.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4dfbd6dd2f04ba933ba86e1e194d4df9d101bdd392b90199144dc8256cb9c191 +size 76656 diff --git a/images/Shaft_01166.png b/images/Shaft_01166.png new file mode 100644 index 0000000000000000000000000000000000000000..cc111451c822e79cbe5a468d27eb2d006c15c376 --- /dev/null +++ b/images/Shaft_01166.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f87fa98f1e603a5c39365732add0b18f143fabfd4ea83751f67d8b367fce12c +size 86108 diff --git a/images/Shaft_01167.png b/images/Shaft_01167.png new file mode 100644 index 0000000000000000000000000000000000000000..eec3dc2b10da66793c51f1007d69da6e0aef286c --- /dev/null +++ b/images/Shaft_01167.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b0c5198ab49ae86f233cd7691f7a157c580ab2b1e3843cce4a2a6ca8299a7d7 +size 91018 diff --git a/images/Shaft_01168.png b/images/Shaft_01168.png new file mode 100644 index 0000000000000000000000000000000000000000..f00f4b44c85602ec0cb0cb0748475f532fd17882 --- /dev/null +++ b/images/Shaft_01168.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba016b8d3264f943506f0f1783de8290d31d75103540e780dd89b105b2df968a +size 98784 diff --git a/images/Shaft_01169.png b/images/Shaft_01169.png new file mode 100644 index 0000000000000000000000000000000000000000..5d182c8fe66755dcc21bb4649084d4c628fa1601 --- /dev/null +++ b/images/Shaft_01169.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1addf9af49e47eaf3514a57197a145e27ee03a6b99fa7c0510d1203d4d5237c +size 98956 diff --git a/images/Shaft_01170.png b/images/Shaft_01170.png new file mode 100644 index 0000000000000000000000000000000000000000..889e38dabede9de3798c519f09e998353b1871e3 --- /dev/null +++ b/images/Shaft_01170.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb229509bbf2042c4de043d64fc571ace71bd77e867f2ed219045ec41744d331 +size 67426 diff --git a/images/Shaft_01171.png b/images/Shaft_01171.png new file mode 100644 index 0000000000000000000000000000000000000000..5996b1fbd20d55d2c236e548102d4b6c8d649aaf --- /dev/null +++ b/images/Shaft_01171.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b0dcf8a79bbefcb795005945d56bd7ff0d56461662b2acdc8baf8b67c509614 +size 89525 diff --git a/images/Shaft_01172.png b/images/Shaft_01172.png new file mode 100644 index 0000000000000000000000000000000000000000..7a66fc8fa13a4ec244ef2d3a5dc7086f5127c6ba --- /dev/null +++ b/images/Shaft_01172.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb654f643f4d3e6564d4631fb6e2f4a9af9b11a6bb4e8c2e0448d5fb4bb620f2 +size 67876 diff --git a/images/Shaft_01173.png b/images/Shaft_01173.png new file mode 100644 index 0000000000000000000000000000000000000000..99c30cc3f90a34f84462509fc4bdbf33815ba554 --- /dev/null +++ b/images/Shaft_01173.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:362401ed16356928d5c8d1440930b0ab1752b79d9c341b75141b564bf9cc57a4 +size 98047 diff --git a/images/Shaft_01174.png b/images/Shaft_01174.png new file mode 100644 index 0000000000000000000000000000000000000000..32ff7efc2cf2a0d2d14cc0de15bd97b92b6c8a4b --- /dev/null +++ b/images/Shaft_01174.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:875a31f2a8ee1551cd9a186761022b8dfc91d0fa1918a2f07611354e814d8983 +size 80782 diff --git a/images/Shaft_01175.png b/images/Shaft_01175.png new file mode 100644 index 0000000000000000000000000000000000000000..770b45632d75aee53ee079c962275a7b1e781f60 --- /dev/null +++ b/images/Shaft_01175.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c1fe7483ed2a6dabc009451eb7e126cc3132fd2d7a2dddc6f10743436f909dc +size 82901 diff --git a/images/Shaft_01176.png b/images/Shaft_01176.png new file mode 100644 index 0000000000000000000000000000000000000000..fa7d69478519100bec56b30b09d19282f1c1c9af --- /dev/null +++ b/images/Shaft_01176.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:104246f950afe60b5d5277e599f03c327a94b1532ee6bdde7cd25af1f5e16623 +size 81343 diff --git a/images/Shaft_01177.png b/images/Shaft_01177.png new file mode 100644 index 0000000000000000000000000000000000000000..bd01f8c6b157bdcd93cc23ca50d29643163487ee --- /dev/null +++ b/images/Shaft_01177.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:161235ad771f33474bb73e27891c9c18c137b2c9d32a9bb2546ca7a87e0663fb +size 66591 diff --git a/images/Shaft_01178.png b/images/Shaft_01178.png new file mode 100644 index 0000000000000000000000000000000000000000..535931167494c4e1a7221f3d1fddbd46db80f9c1 --- /dev/null +++ b/images/Shaft_01178.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2314342ce986d05adfb1a7adbb118317eee65ed1c58364dd843b4ebac793f248 +size 98936 diff --git a/images/Shaft_01179.png b/images/Shaft_01179.png new file mode 100644 index 0000000000000000000000000000000000000000..8d1fc8f202a3a6bc5ba06df940dc4a963e819b37 --- /dev/null +++ b/images/Shaft_01179.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bedc87c0afb2c8c06da73920393ad3602f32e362527a66cf53fd29a2bc4c043b +size 105753 diff --git a/images/Shaft_01180.png b/images/Shaft_01180.png new file mode 100644 index 0000000000000000000000000000000000000000..a811337cd6a7b6e9cd5859d25e6f44da1b1ee968 --- /dev/null +++ b/images/Shaft_01180.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d20a16349bd6ae2214fb373a09cf10f60be0e023038269c45f87bb3f6de7017 +size 92804 diff --git a/images/Shaft_01181.png b/images/Shaft_01181.png new file mode 100644 index 0000000000000000000000000000000000000000..17e5d6f75b07a7606fe5ec5307e43876f733a0b7 --- /dev/null +++ b/images/Shaft_01181.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1ece4d4e91db3ceea9a17943da08e7bc55bf5756e446fc34d407294baee99a4 +size 71409 diff --git a/images/Shaft_01182.png b/images/Shaft_01182.png new file mode 100644 index 0000000000000000000000000000000000000000..fee9581ecd48cbb1c5ca08e27c74872abacc8294 --- /dev/null +++ b/images/Shaft_01182.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52e36bf25912b5418ea3d96c70464bac75a0a5a2be9cceb5a1267a846a5b7cc2 +size 75615 diff --git a/images/Shaft_01183.png b/images/Shaft_01183.png new file mode 100644 index 0000000000000000000000000000000000000000..2476479225a5fbce345b874b59c09d1e61d4c251 --- /dev/null +++ b/images/Shaft_01183.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b6c34d5977be2733bc04d4ef3440e0eb08cfec2b6c4adbb10728923eb60701b +size 80407 diff --git a/images/Shaft_01184.png b/images/Shaft_01184.png new file mode 100644 index 0000000000000000000000000000000000000000..96c99c1e33900e7d04cd76917f2cd25e2ee825a3 --- /dev/null +++ b/images/Shaft_01184.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b8dcd36f7d07f18279999b6ff47f7454bef8beb84c099bd60354ed854b088f3 +size 91820 diff --git a/images/Shaft_01185.png b/images/Shaft_01185.png new file mode 100644 index 0000000000000000000000000000000000000000..9b4e2f2217289c601add61eb8216253cadb08c64 --- /dev/null +++ b/images/Shaft_01185.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c56f0827f5ddd13720c427dedffe7a90f1a6f0e57cac157c34255d7fbee4326e +size 72165 diff --git a/images/Shaft_01186.png b/images/Shaft_01186.png new file mode 100644 index 0000000000000000000000000000000000000000..ff67b55c1448077ea8e918baf05a404df4f6dc0f --- /dev/null +++ b/images/Shaft_01186.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aa8b542ea925559c4be25a151edbdd8e0114438766989d95db2174fc21d1883 +size 74961 diff --git a/images/Shaft_01187.png b/images/Shaft_01187.png new file mode 100644 index 0000000000000000000000000000000000000000..51bfa978557166899656cb0e535b2bc00c177617 --- /dev/null +++ b/images/Shaft_01187.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d952f6d622ed43ea64b03b0f882269b22ccd2523b9d4008f4408b28a7aa74df2 +size 108755 diff --git a/images/Shaft_01188.png b/images/Shaft_01188.png new file mode 100644 index 0000000000000000000000000000000000000000..bd406248cd99500c7b392f64a288272f8afc26eb --- /dev/null +++ b/images/Shaft_01188.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8d5e74d436ee0d84641bc81283b72036db9b54015bf6b5dcb534cdebbb247d1 +size 75777 diff --git a/images/Shaft_01189.png b/images/Shaft_01189.png new file mode 100644 index 0000000000000000000000000000000000000000..b7b89e7ea34928b834432e52970b15035e7f3fe0 --- /dev/null +++ b/images/Shaft_01189.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:035191c5086259735728f2e3501fad037982c97373ec81047c5ce212fd7ad4c8 +size 83665 diff --git a/images/Shaft_01190.png b/images/Shaft_01190.png new file mode 100644 index 0000000000000000000000000000000000000000..00fb27b2443b2c30fcb531f48329949ea871287f --- /dev/null +++ b/images/Shaft_01190.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:506159efce7edf8f8b6696d5573df7924061105bf21d72497913dc4dae66e402 +size 85245 diff --git a/images/Shaft_01191.png b/images/Shaft_01191.png new file mode 100644 index 0000000000000000000000000000000000000000..a31bb58b6990286f6ecd7565c8b22474279cc3bd --- /dev/null +++ b/images/Shaft_01191.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d014fac067b14ad1332d431b98f38a5f9ca892655935f0e76e4a63bb9e642a70 +size 78082 diff --git a/images/Shaft_01192.png b/images/Shaft_01192.png new file mode 100644 index 0000000000000000000000000000000000000000..8fc57fe3c393c0179c3a869d5b637112f77c855b --- /dev/null +++ b/images/Shaft_01192.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6895ceb1f2e9c9ec05e04fd97b2f4dc0779e1b01cd8eba1e7e715d017e9ab60 +size 92180 diff --git a/images/Shaft_01193.png b/images/Shaft_01193.png new file mode 100644 index 0000000000000000000000000000000000000000..68219d40078610b157c675974e3fd817b092090e --- /dev/null +++ b/images/Shaft_01193.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36022795dde734944f9a014e8a4cecd7dba98a6ca7fb5116d5b066be2f7d0179 +size 103668 diff --git a/images/Shaft_01194.png b/images/Shaft_01194.png new file mode 100644 index 0000000000000000000000000000000000000000..e108005b40661b46ac31732f57b8eda6480b5def --- /dev/null +++ b/images/Shaft_01194.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:600cdcc4d4f8777cd81510cd045d117a1841192926ffc5dcb829da83de279f83 +size 75922 diff --git a/images/Shaft_01195.png b/images/Shaft_01195.png new file mode 100644 index 0000000000000000000000000000000000000000..530cf2ab5745650277539d3005e5ea4a07fcf145 --- /dev/null +++ b/images/Shaft_01195.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0958dc8a973f75f2e573adafde7c85e74efe19980b14a6352889ef681720ffd5 +size 82884 diff --git a/images/Shaft_01196.png b/images/Shaft_01196.png new file mode 100644 index 0000000000000000000000000000000000000000..3a5cb52a6e446a6b38a67e61193852585397203e --- /dev/null +++ b/images/Shaft_01196.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a36ed1c46132e5bfb9be3381cc577b9cd8169a10093321a9a8b2e45a5c3c1c24 +size 74279 diff --git a/images/Shaft_01197.png b/images/Shaft_01197.png new file mode 100644 index 0000000000000000000000000000000000000000..22a1940852d23b44eb0fbbe0adedb77c2a63246d --- /dev/null +++ b/images/Shaft_01197.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e96ec2ae951a14bc5c8814e7e50fa3a79fb4249a9b7118d36d9aaae8e42d3ec +size 68689 diff --git a/images/Shaft_01198.png b/images/Shaft_01198.png new file mode 100644 index 0000000000000000000000000000000000000000..b61d9ccb2132895fe0dd2a12ea907924b8882a75 --- /dev/null +++ b/images/Shaft_01198.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78e1afcac1a818aa32648ea0e2ef78d5374a39a254dde55969d5684eb3e9db53 +size 71576 diff --git a/images/Shaft_01199.png b/images/Shaft_01199.png new file mode 100644 index 0000000000000000000000000000000000000000..7cb6236c600fb42f85139430abefdecc0758f5b6 --- /dev/null +++ b/images/Shaft_01199.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:342579a209beb00d6333cfbca1f56c2e68aac24fe3c2bb69ce12d9a736f7f474 +size 101282 diff --git a/images/Shaft_01200.png b/images/Shaft_01200.png new file mode 100644 index 0000000000000000000000000000000000000000..02bb1df64b7ac03ef5c2a6e60daccde2c51152f3 --- /dev/null +++ b/images/Shaft_01200.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:975e7ca3884f07777c275446fcd541a49eb9f13858a202d96058d63c4f422a1c +size 111544 diff --git a/images/Shaft_01201.png b/images/Shaft_01201.png new file mode 100644 index 0000000000000000000000000000000000000000..d99e1c456afa128e1fdd45a082e6c3efd8b070f6 --- /dev/null +++ b/images/Shaft_01201.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1059fbce85769024918ecf28922a23a3875550e34245aa5832447658a51d5ff6 +size 100522 diff --git a/images/Shaft_01202.png b/images/Shaft_01202.png new file mode 100644 index 0000000000000000000000000000000000000000..f50c1a6c73bcec202e61ed3edf08c50d73ec28f4 --- /dev/null +++ b/images/Shaft_01202.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b59b489663c2414d87fecc4616d28506f0f113f9cf4179a0f53cfc54e32189dc +size 117980 diff --git a/images/Shaft_01203.png b/images/Shaft_01203.png new file mode 100644 index 0000000000000000000000000000000000000000..af85fdcc6242ebff1304e4378c6899a1e5c93b9d --- /dev/null +++ b/images/Shaft_01203.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77d6b306871bd88f6d6fadfb8defb428c37164f1a417dc69c21f164ab1747ee0 +size 79983 diff --git a/images/Shaft_01204.png b/images/Shaft_01204.png new file mode 100644 index 0000000000000000000000000000000000000000..d6205ef7713495ebd85ef543b651f991e2e25d23 --- /dev/null +++ b/images/Shaft_01204.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c218b5349bbe163379a8ae20f3fcb69dbf4057dd9eab2e1a130c6595a5b1a9d8 +size 81125 diff --git a/images/Shaft_01205.png b/images/Shaft_01205.png new file mode 100644 index 0000000000000000000000000000000000000000..60bcfa75ec7afe9347d5fd113ef4f712dd81c082 --- /dev/null +++ b/images/Shaft_01205.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff9310b5e31e7ccbec26e5a4e24f605759a93f23b1f57eb35a5afd299046e34b +size 90101 diff --git a/images/Shaft_01206.png b/images/Shaft_01206.png new file mode 100644 index 0000000000000000000000000000000000000000..0d36bf3410d7ecd095a5f288ac505a6f4219316c --- /dev/null +++ b/images/Shaft_01206.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3999e6ed027ff893b1368930ef0cd94f21944de80ec4435f168a1eb52ca08e8b +size 103236 diff --git a/images/Shaft_01207.png b/images/Shaft_01207.png new file mode 100644 index 0000000000000000000000000000000000000000..e849e1d142b8700369f72da7d46798c00245bee2 --- /dev/null +++ b/images/Shaft_01207.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8587ae2d136b866b9cec67e9a63c7068f7a71de20e1b1021e62ee78ef1ceef9c +size 76367 diff --git a/images/Shaft_01208.png b/images/Shaft_01208.png new file mode 100644 index 0000000000000000000000000000000000000000..f0c741734b8c57dcd7cf322a866946d07b48aff7 --- /dev/null +++ b/images/Shaft_01208.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd03c41f13cc4989743499e376fa227b34ac0fe827d4b7414b9aa1ad645621d5 +size 87919 diff --git a/images/Shaft_01209.png b/images/Shaft_01209.png new file mode 100644 index 0000000000000000000000000000000000000000..8944ba894d41081878197444ea12e52108871684 --- /dev/null +++ b/images/Shaft_01209.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:402330ffcd402cdb46f420eea96e6cbcbdc8797f9743d71303820dc39fbc9702 +size 104932 diff --git a/images/Shaft_01210.png b/images/Shaft_01210.png new file mode 100644 index 0000000000000000000000000000000000000000..0cb51b694fe9465b28e2dc9fb5ef8c6576f9792c --- /dev/null +++ b/images/Shaft_01210.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b026d8e9b1ae5386a0d264a8d100a5c000a06f881bfb951880666cbb8c19465b +size 84673 diff --git a/images/Shaft_01211.png b/images/Shaft_01211.png new file mode 100644 index 0000000000000000000000000000000000000000..52f6e2cebc80a0827c6975a3aba39ec8a25d2f0b --- /dev/null +++ b/images/Shaft_01211.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a729648138fa24c974286a86914a9b6d6f7f23dd885809e24d3f691540b39e3 +size 82506 diff --git a/images/Shaft_01212.png b/images/Shaft_01212.png new file mode 100644 index 0000000000000000000000000000000000000000..21831c3a30428c8f8b47955089ff0984a60b9bec --- /dev/null +++ b/images/Shaft_01212.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ed0b40898a63d82c10c91c1ab13a3b7a339a86873bb75b6f6855ad9bb211db5 +size 69723 diff --git a/images/Shaft_01213.png b/images/Shaft_01213.png new file mode 100644 index 0000000000000000000000000000000000000000..49d915f7cb902366a3ca944375ffb694e91b7109 --- /dev/null +++ b/images/Shaft_01213.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c168fef56e25cd5175df80a1aef5c831b1c393f1c581e47c4d56baeb7a6ddfa +size 71733 diff --git a/images/Shaft_01214.png b/images/Shaft_01214.png new file mode 100644 index 0000000000000000000000000000000000000000..0abd913c085f362e9f8c89c95a06fbdcf25483bc --- /dev/null +++ b/images/Shaft_01214.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9d4c7241c1738768700ce9baa25e9fd9aa7dd25eb2f248c18635c962e1b092a +size 81202 diff --git a/images/Shaft_01215.png b/images/Shaft_01215.png new file mode 100644 index 0000000000000000000000000000000000000000..26de2859baafafafa9498fb5adf7ad998fa4d47b --- /dev/null +++ b/images/Shaft_01215.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9be796b1853bd7ba9ad08e0fdfd5b1dffc4b038db5d7dd46b21ae448b724466 +size 78149 diff --git a/images/Shaft_01216.png b/images/Shaft_01216.png new file mode 100644 index 0000000000000000000000000000000000000000..036b4a4c616579d9a969843a82c4a1f2a899a624 --- /dev/null +++ b/images/Shaft_01216.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:358a27f3e2e82e0a10cae445dd8437581e554f89d2bc6354e2397ce9d4fbff52 +size 77985 diff --git a/images/Shaft_01217.png b/images/Shaft_01217.png new file mode 100644 index 0000000000000000000000000000000000000000..9f0b212b26c5774b0026d294963e48bd4b458c79 --- /dev/null +++ b/images/Shaft_01217.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5cf23cf3030b2bc00eedf1c00a44d6af77251ffebd20acf25a2d7764c870ef2 +size 77351 diff --git a/images/Shaft_01218.png b/images/Shaft_01218.png new file mode 100644 index 0000000000000000000000000000000000000000..9095fdd6133e410d7794831a3ae18899333010f7 --- /dev/null +++ b/images/Shaft_01218.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7bc56943ebcf32449a629befa8698a725a3091d93f25784953a36a1bc5ed05d +size 114038 diff --git a/images/Shaft_01219.png b/images/Shaft_01219.png new file mode 100644 index 0000000000000000000000000000000000000000..d9bdd201c97378150874be8b59055563dfbd77fc --- /dev/null +++ b/images/Shaft_01219.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e39f04a22333bf3d410c02166cc00c9abb40f8f129b37c5d0cb039c4901738d6 +size 92223 diff --git a/images/Shaft_01220.png b/images/Shaft_01220.png new file mode 100644 index 0000000000000000000000000000000000000000..be0045cde7449170ab8fb966c00d9ff7de271c73 --- /dev/null +++ b/images/Shaft_01220.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b75bfc2d0f80edab290297dd80566d67891aab64982e3cd1fd1ad4c4a95218d +size 70689 diff --git a/images/Shaft_01221.png b/images/Shaft_01221.png new file mode 100644 index 0000000000000000000000000000000000000000..d18b444c67193b35edf13889052ca025c0c20681 --- /dev/null +++ b/images/Shaft_01221.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e48778a7d3bce75362d33a00e54f12d2554464f55a40c7db521a0323d2644de +size 67864 diff --git a/images/Shaft_01222.png b/images/Shaft_01222.png new file mode 100644 index 0000000000000000000000000000000000000000..2ae3336374347ecaf0dbe2cf2610231b83d02905 --- /dev/null +++ b/images/Shaft_01222.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d3105670d9cd1061aeb676a8065579b0f3e86be0d22b4d028b5a8f00c334a1d +size 79794 diff --git a/images/Shaft_01223.png b/images/Shaft_01223.png new file mode 100644 index 0000000000000000000000000000000000000000..5271e969fe0fb559e9b526b696721f6bf2359e16 --- /dev/null +++ b/images/Shaft_01223.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e912a76dc4f4e8ab0ccbbeb6cc5f9a15a0967c9acf1dd30479ffe8a4d860eac +size 94038 diff --git a/images/Shaft_01224.png b/images/Shaft_01224.png new file mode 100644 index 0000000000000000000000000000000000000000..e1dbb772bdaf60380c0f349641d80fd10b8189d2 --- /dev/null +++ b/images/Shaft_01224.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e69d6ac4f7c16e42b008b2a6dd2f631ab2ffb6faf57851678aee684655fa188e +size 91382 diff --git a/images/Shaft_01225.png b/images/Shaft_01225.png new file mode 100644 index 0000000000000000000000000000000000000000..eb2ecc62465badec7f9694bb77be7b73c13c3f47 --- /dev/null +++ b/images/Shaft_01225.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:823013c3e996b6d7b9412079f2ad06814482003be6dfc02a789e2a1f73024e86 +size 85451 diff --git a/images/Shaft_01226.png b/images/Shaft_01226.png new file mode 100644 index 0000000000000000000000000000000000000000..465bffc6ea2e1ce037a03eda63835a0d92e8d9f2 --- /dev/null +++ b/images/Shaft_01226.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b63d884d837083f5b02b21854897f1954bb9333af9ba3246bed440896a9282ac +size 82909 diff --git a/images/Shaft_01227.png b/images/Shaft_01227.png new file mode 100644 index 0000000000000000000000000000000000000000..3cfd8ef1a903539e9c377b006348dab3aed260ba --- /dev/null +++ b/images/Shaft_01227.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81d2e8242601c211cfddf4d0e61dbc5e489bb41aa69d60a25ffce6e8cc68f080 +size 109746 diff --git a/images/Shaft_01228.png b/images/Shaft_01228.png new file mode 100644 index 0000000000000000000000000000000000000000..dcafebead2c9906dcdfe77d20e842daede251a65 --- /dev/null +++ b/images/Shaft_01228.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5a011672db4b5227ef849fa90b53ee4b6e49433ffafea6ab17f9fd15d7b1f7b +size 108569 diff --git a/images/Shaft_01229.png b/images/Shaft_01229.png new file mode 100644 index 0000000000000000000000000000000000000000..f24835f169a371e91228007e6322500445b2f8cd --- /dev/null +++ b/images/Shaft_01229.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48c58c6f1f1f7dcada30cd55e5ea865c71241501f3adb81080caa7d59b3bc1d4 +size 72137 diff --git a/images/Shaft_01230.png b/images/Shaft_01230.png new file mode 100644 index 0000000000000000000000000000000000000000..f3c01065bc6d9287fcca02db941f2a299f4c147c --- /dev/null +++ b/images/Shaft_01230.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbf5359c4a3acba689716c4ece9a59c1956797c5ba7945fc4814eca70402dccd +size 88244 diff --git a/images/Shaft_01231.png b/images/Shaft_01231.png new file mode 100644 index 0000000000000000000000000000000000000000..01d221790a823e693c350c288f364a2710ec8805 --- /dev/null +++ b/images/Shaft_01231.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6d64b602c9929cedbf073a52e0a43dc0059e8172c80cb3e89b8e040a5f0ff0e +size 94761 diff --git a/images/Shaft_01232.png b/images/Shaft_01232.png new file mode 100644 index 0000000000000000000000000000000000000000..94128f2583b001b0731e0fb4114a0bdd0cfc2d65 --- /dev/null +++ b/images/Shaft_01232.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b6cd6d5a2806c10d7d5b23985c609d1b9d1947d677fc2e5ff38b56e2f774df8 +size 72333 diff --git a/images/Shaft_01233.png b/images/Shaft_01233.png new file mode 100644 index 0000000000000000000000000000000000000000..276bd1e0cc71abfc8f100ac18df5aa32a67e3d76 --- /dev/null +++ b/images/Shaft_01233.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16bd17b6325de4b2a3d74a810e21468bb0e01fc302d5d9599586c997bae9a4f5 +size 98959 diff --git a/images/Shaft_01234.png b/images/Shaft_01234.png new file mode 100644 index 0000000000000000000000000000000000000000..b50bfe8f500019320877e2db0f8dce5ee92f3241 --- /dev/null +++ b/images/Shaft_01234.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c20bc59037e587ed4b438221bf0dd82418d6dfe38830757cce9962155360bd5a +size 86848 diff --git a/images/Shaft_01235.png b/images/Shaft_01235.png new file mode 100644 index 0000000000000000000000000000000000000000..623dd936fdc701507e854d6e19b0f4c21bb01503 --- /dev/null +++ b/images/Shaft_01235.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:158c28bfdb5d5ab98342b2e6dab80d6f5dc5257699c3df8a3563c205ec113016 +size 94806 diff --git a/images/Shaft_01236.png b/images/Shaft_01236.png new file mode 100644 index 0000000000000000000000000000000000000000..0fc8572ba2b91bd6380936428730b9f4b7fbfaaa --- /dev/null +++ b/images/Shaft_01236.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8971a3323f5df7acc0fe3e89ab84f9399dcefa87259218bd657a82ecaa84db67 +size 96450 diff --git a/images/Shaft_01237.png b/images/Shaft_01237.png new file mode 100644 index 0000000000000000000000000000000000000000..a60cc2b1c404585149a2cfa07cf2a32e45a74230 --- /dev/null +++ b/images/Shaft_01237.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3af082f25a00258c56b4bb17899037501e269bd8a91f694074f820a08198446f +size 103254 diff --git a/images/Shaft_01238.png b/images/Shaft_01238.png new file mode 100644 index 0000000000000000000000000000000000000000..47c4b416f11376f438b41311d28d8faee75b50fa --- /dev/null +++ b/images/Shaft_01238.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90a1c3a3dcbd0ab0d4e632665d5dea637c3fddce32254ba8e48b18d319439c8a +size 75179 diff --git a/images/Shaft_01239.png b/images/Shaft_01239.png new file mode 100644 index 0000000000000000000000000000000000000000..63a64ac0b6a2c761633021f6cf46764d0197a891 --- /dev/null +++ b/images/Shaft_01239.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cab71571312db63a18d0e678516c4f236eb17eadad89b2e40f9a7f88cf3f37e5 +size 111450 diff --git a/images/Shaft_01240.png b/images/Shaft_01240.png new file mode 100644 index 0000000000000000000000000000000000000000..71acb604699f93d7ed11b3b916b7e73d53b7cf8d --- /dev/null +++ b/images/Shaft_01240.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8331db7accfbafdb3bf3c476ad292143f76e4f809d7837fe648a17f9aa36d73e +size 88205 diff --git a/images/Shaft_01241.png b/images/Shaft_01241.png new file mode 100644 index 0000000000000000000000000000000000000000..39c3be8464644a50d7c94bc592fed08540a5ed50 --- /dev/null +++ b/images/Shaft_01241.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3745db64bfb984077f0ad3fd2526e53e949db41d7f993a350c399134d81775e5 +size 78243 diff --git a/images/Shaft_01242.png b/images/Shaft_01242.png new file mode 100644 index 0000000000000000000000000000000000000000..a505f23f535b61fc3619e4995bd3beef67ac370f --- /dev/null +++ b/images/Shaft_01242.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:663a75b2c90ea2e7b53f371ec0ca89b8bd1160aa7e1cf440e1e8dcf63a440b42 +size 68553 diff --git a/images/Shaft_01243.png b/images/Shaft_01243.png new file mode 100644 index 0000000000000000000000000000000000000000..bc41ec12b700bfb083c3dc9ba2468863d2fe9f4b --- /dev/null +++ b/images/Shaft_01243.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33ea75ae69068fbe0a091be946720ef1866a12fd55fcfc18ef7e4f11b450d988 +size 69525 diff --git a/images/Shaft_01244.png b/images/Shaft_01244.png new file mode 100644 index 0000000000000000000000000000000000000000..aa4217d7850cc4d183522b568ef2ef684be4031d --- /dev/null +++ b/images/Shaft_01244.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cf28a5014058ee9284b7e4ce9ca32542e076064ebee5303a886245d3b0677e9 +size 106135 diff --git a/images/Shaft_01245.png b/images/Shaft_01245.png new file mode 100644 index 0000000000000000000000000000000000000000..da7be25eb840ce373c9ec5b9ee05cd8f1d72bf77 --- /dev/null +++ b/images/Shaft_01245.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f69e2c989f533670741c0fe834f8359efe982972d3dd8c2014687d6c4df986b6 +size 75595 diff --git a/images/Shaft_01246.png b/images/Shaft_01246.png new file mode 100644 index 0000000000000000000000000000000000000000..1204cfbbcce96f079c5cd09a64747e0e6e05a676 --- /dev/null +++ b/images/Shaft_01246.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe36b5a06e830c0d4e57513a3540e838cb73d9f51654c9702428220fef83c4a9 +size 108273 diff --git a/images/Shaft_01247.png b/images/Shaft_01247.png new file mode 100644 index 0000000000000000000000000000000000000000..1cdad60c2d32a7531f204092c2ae2026993c84e8 --- /dev/null +++ b/images/Shaft_01247.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cee8d106bb2e54b8b8f2aa622298dea9b9188fd716a06c6ea0041eb933befd2 +size 70245 diff --git a/images/Shaft_01248.png b/images/Shaft_01248.png new file mode 100644 index 0000000000000000000000000000000000000000..73e58cbf0be262367f39701b7a1d48e8aa7d7ff2 --- /dev/null +++ b/images/Shaft_01248.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:218fe2f35fd069e6909f9b20748dacf0c556559e7c9ebf5372825206e5255097 +size 71170 diff --git a/images/Shaft_01249.png b/images/Shaft_01249.png new file mode 100644 index 0000000000000000000000000000000000000000..3ed6d0f6b17e9acd1241dc4cde6c5fd28a27fa53 --- /dev/null +++ b/images/Shaft_01249.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11c8ab7223500418453474061c76b7b5e305908e5cfc71e586e6f472ef8a3eea +size 80038 diff --git a/images/Shaft_01250.png b/images/Shaft_01250.png new file mode 100644 index 0000000000000000000000000000000000000000..1f8c4005fc56e75ff2620cd8c5f1adfca6084dbd --- /dev/null +++ b/images/Shaft_01250.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b250ca4407d1f1c53f0037bb21ad4ffece5f5b9052a0666145486154a0b9845 +size 94323 diff --git a/images/Shaft_01251.png b/images/Shaft_01251.png new file mode 100644 index 0000000000000000000000000000000000000000..ae9e87b98cc6ba63848112db78b05944561fd1a6 --- /dev/null +++ b/images/Shaft_01251.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcdd848060914ed1ef1baef2536f590c7a2fecf11537473dcea5db6f54ccfb53 +size 81271 diff --git a/images/Shaft_01252.png b/images/Shaft_01252.png new file mode 100644 index 0000000000000000000000000000000000000000..51612ce63a3929184df9644ac3b79a105bfa9c17 --- /dev/null +++ b/images/Shaft_01252.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b48e166f1b12057d52971b3c2f560ad7c5d4232c059f19159de82bd863b7291 +size 86885 diff --git a/images/Shaft_01253.png b/images/Shaft_01253.png new file mode 100644 index 0000000000000000000000000000000000000000..11ec8ea973971f998b94267b11c56f7563b47368 --- /dev/null +++ b/images/Shaft_01253.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40ad9ef3377dbf3534276efb5488a46aac97c0104b3d80b6acb360c8699fd122 +size 103658 diff --git a/images/Shaft_01254.png b/images/Shaft_01254.png new file mode 100644 index 0000000000000000000000000000000000000000..a59fa180c76bffea330a89fb4ca068e26f8ee747 --- /dev/null +++ b/images/Shaft_01254.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:958397b228a4706f4aa80fcab131beb0c0a4184dac5c2ea075b4092c74543e62 +size 91793 diff --git a/images/Shaft_01255.png b/images/Shaft_01255.png new file mode 100644 index 0000000000000000000000000000000000000000..6c17a259740025d3337274e14de5c6f824b3cbe0 --- /dev/null +++ b/images/Shaft_01255.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0dee8e622940fec2de6614a739dd9df5ccc6d1b5bbd2b1a9d68fb7e4dfa63b71 +size 70495 diff --git a/images/Shaft_01256.png b/images/Shaft_01256.png new file mode 100644 index 0000000000000000000000000000000000000000..49f767dd1aee62c188441ac6beb74dd6f12d747a --- /dev/null +++ b/images/Shaft_01256.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d17b4c4e8a313f6066e140f7f0095c282d9c4b089f1688f3c34088d1f649a844 +size 80218 diff --git a/images/Shaft_01257.png b/images/Shaft_01257.png new file mode 100644 index 0000000000000000000000000000000000000000..5b63580d27a995958cd5efbd7267e027679af8ca --- /dev/null +++ b/images/Shaft_01257.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e520a9cb29d17bda87e6d8e658baed4fccaec2ccc6d72d4b42bd3a1ef463912 +size 70924 diff --git a/images/Shaft_01258.png b/images/Shaft_01258.png new file mode 100644 index 0000000000000000000000000000000000000000..39b02d9b5cab27541d96759424e15d122e626767 --- /dev/null +++ b/images/Shaft_01258.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c533419accd44c3fb5ed4e0658fee23a971750a2481cb41a9d7b230b7900128 +size 104378 diff --git a/images/Shaft_01259.png b/images/Shaft_01259.png new file mode 100644 index 0000000000000000000000000000000000000000..31a43661c59f7ff2c7aba2b9c0db000037cdd759 --- /dev/null +++ b/images/Shaft_01259.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fd345c43078d953988ef3ca1707b225968ea628f2c3a362f87d3eb3fed5d379 +size 99528 diff --git a/images/Shaft_01260.png b/images/Shaft_01260.png new file mode 100644 index 0000000000000000000000000000000000000000..5b2c3803507e66bdc413b9f853f6d15540d6c59d --- /dev/null +++ b/images/Shaft_01260.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae0113a06f163ee078cb7fe7962f43babafa5a62d242c3466b4fcc4423e3ae31 +size 83803 diff --git a/images/Shaft_01261.png b/images/Shaft_01261.png new file mode 100644 index 0000000000000000000000000000000000000000..c8a323ca613d4ee85ba2f0d7ba60a1cba6d39b73 --- /dev/null +++ b/images/Shaft_01261.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa6efa8d5c5c79fa69062d6ff36eefd3a2de33664e7d8d4a56804f28ba1b4ffb +size 83921 diff --git a/images/Shaft_01262.png b/images/Shaft_01262.png new file mode 100644 index 0000000000000000000000000000000000000000..519879b699250d956c074e7f7cbf5d6328159f28 --- /dev/null +++ b/images/Shaft_01262.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48e5eb5b9b1c821c215976d0b42fad85f767485982fcab6ff90ca106c2847cf +size 90823 diff --git a/images/Shaft_01263.png b/images/Shaft_01263.png new file mode 100644 index 0000000000000000000000000000000000000000..d454d64c7a896012321a5d33a04637c1be184823 --- /dev/null +++ b/images/Shaft_01263.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8b568a2b155f188382d0f0a798c244ecc2a4f8cd78042788ec63cc7064c7a7c +size 93927 diff --git a/images/Shaft_01264.png b/images/Shaft_01264.png new file mode 100644 index 0000000000000000000000000000000000000000..b249079350119488f05084beb7de96fddc142783 --- /dev/null +++ b/images/Shaft_01264.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:def3b7113b2c138b829aad2fc1140d3aaa60ea4d89ecf5cf70b535e369a6f973 +size 90855 diff --git a/images/Shaft_01265.png b/images/Shaft_01265.png new file mode 100644 index 0000000000000000000000000000000000000000..d27d1b6a96320ea676bfd465e2073f6540f6ae33 --- /dev/null +++ b/images/Shaft_01265.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b4266653616d7793cf94ef36fdb090dcc1a3708994d4eb326921d9f1825f01b +size 82824 diff --git a/images/Shaft_01266.png b/images/Shaft_01266.png new file mode 100644 index 0000000000000000000000000000000000000000..3a7de904ac646b4f7f664dbb4af10b6c3dbb78ee --- /dev/null +++ b/images/Shaft_01266.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8c6fe1ab7805ac812dff368d190c0895e67098244a505e18e11ed8224d8177b +size 79080 diff --git a/images/Shaft_01267.png b/images/Shaft_01267.png new file mode 100644 index 0000000000000000000000000000000000000000..dec08598f3470f6f31553335be36c18a1fbd8b96 --- /dev/null +++ b/images/Shaft_01267.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dae84ae3e2e3d28cc5cf059da7018b9c4ed8f56ba07d2f718c769e08d40d03d +size 76483 diff --git a/images/Shaft_01268.png b/images/Shaft_01268.png new file mode 100644 index 0000000000000000000000000000000000000000..20555769cc12e86e54736ed290278b24c853ac16 --- /dev/null +++ b/images/Shaft_01268.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10f62e011ff7be0538e77d8ebbca67fb439ae145b787897ec65a379570d4ff37 +size 100358 diff --git a/images/Shaft_01269.png b/images/Shaft_01269.png new file mode 100644 index 0000000000000000000000000000000000000000..9124bab5d91b156bd4502c344a746446984e8655 --- /dev/null +++ b/images/Shaft_01269.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5575c0f652185d0719814baab6bad09d3f3ad7a353139e99d2bdb673fa09f0c7 +size 81060 diff --git a/images/Shaft_01270.png b/images/Shaft_01270.png new file mode 100644 index 0000000000000000000000000000000000000000..4d1bae6177b5b186c21531e8d285353497ac97ce --- /dev/null +++ b/images/Shaft_01270.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27c9402d099428ffe5186fbf5cbeeda3fc59b28b523057efb3469ecfd2974e5e +size 83246 diff --git a/images/Shaft_01271.png b/images/Shaft_01271.png new file mode 100644 index 0000000000000000000000000000000000000000..624caf051e16da2c5148fd18b721b065e6cedf47 --- /dev/null +++ b/images/Shaft_01271.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba59e74678cdf4d596e3ccc60e68aa3b3ad8ba162c5946f640e25d6c263c0e74 +size 74289 diff --git a/images/Shaft_01272.png b/images/Shaft_01272.png new file mode 100644 index 0000000000000000000000000000000000000000..6b878551cbd3f110ce5590546f3fa0fd5383d830 --- /dev/null +++ b/images/Shaft_01272.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17219885f4fc32b37ba374bb4df6cf73c2456e9fa4495a66fd3bd26d3b4448da +size 104151 diff --git a/images/Shaft_01273.png b/images/Shaft_01273.png new file mode 100644 index 0000000000000000000000000000000000000000..efc29dde8d7257b1a442dd0b1f6a766a8b99d867 --- /dev/null +++ b/images/Shaft_01273.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3379dbefa6ce090c5667afd89d443106bb05dda9a4ffd1dfd9e7b47129be6a7a +size 96869 diff --git a/images/Shaft_01274.png b/images/Shaft_01274.png new file mode 100644 index 0000000000000000000000000000000000000000..9a737eb57808bd0025a1e890988ad107b372d3ba --- /dev/null +++ b/images/Shaft_01274.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae4e4b101921612a29b6879b72746107eb5d8d13b1576d06f7a1bc2017976c4b +size 80498 diff --git a/images/Shaft_01275.png b/images/Shaft_01275.png new file mode 100644 index 0000000000000000000000000000000000000000..0f28e5b796fd93194745f4ce056ac51df7a0e05b --- /dev/null +++ b/images/Shaft_01275.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5acf8c2a0c304b89a430e566eb0f84a396fd31c00eba7389b08088203377f71c +size 78835 diff --git a/images/Shaft_01276.png b/images/Shaft_01276.png new file mode 100644 index 0000000000000000000000000000000000000000..faa64489b753e6bcc6ee969b7d35125036304cd9 --- /dev/null +++ b/images/Shaft_01276.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c285b8983ec45ddecd70403549d0c91249a300efedcc98e2c299602eff390db5 +size 90171 diff --git a/images/Shaft_01277.png b/images/Shaft_01277.png new file mode 100644 index 0000000000000000000000000000000000000000..e35f95e0d913e3f204c624591c2105ee523f49ea --- /dev/null +++ b/images/Shaft_01277.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0683cdf1253db24e89a802fb3ac4fb606194e462934ed26afa589a965d97f4ba +size 87918 diff --git a/images/Shaft_01278.png b/images/Shaft_01278.png new file mode 100644 index 0000000000000000000000000000000000000000..f9d7d38b47d7591f8afba7b230ab8be203391c6c --- /dev/null +++ b/images/Shaft_01278.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc04daf95fbc6b5f819b1f055db2e7803b535d11695c84f199a2c4ee3e2eba31 +size 91892 diff --git a/images/Shaft_01279.png b/images/Shaft_01279.png new file mode 100644 index 0000000000000000000000000000000000000000..a32a437a4c487f85252b19bbcbf64917da93a518 --- /dev/null +++ b/images/Shaft_01279.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76874ebfb585e107ad0bfd12d367d80867b8fc7c5d95786ee7800ec1ca981ca4 +size 76081 diff --git a/images/Shaft_01280.png b/images/Shaft_01280.png new file mode 100644 index 0000000000000000000000000000000000000000..de3cb1e8bc903947e9acf3c7c835f89838522305 --- /dev/null +++ b/images/Shaft_01280.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54bd736fa672c974e0f82bd21af9baeae60f6802f20c97587effbae75ce980fc +size 74194 diff --git a/images/Shaft_01281.png b/images/Shaft_01281.png new file mode 100644 index 0000000000000000000000000000000000000000..92ec9e2b975d017d1aabff8136bf12880429bc28 --- /dev/null +++ b/images/Shaft_01281.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2736e6cf5d75897664e2f9e848fbc550b59ec5c32faa34c97bee10064c56de94 +size 99214 diff --git a/images/Shaft_01282.png b/images/Shaft_01282.png new file mode 100644 index 0000000000000000000000000000000000000000..ab076f95b06a9bdea16c1672906024b48088d20c --- /dev/null +++ b/images/Shaft_01282.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d81fd795aa5f041621009e9e889236c342a3649e7c3d787fac66a7571d53d0ec +size 89190 diff --git a/images/Shaft_01283.png b/images/Shaft_01283.png new file mode 100644 index 0000000000000000000000000000000000000000..5a29b96c5e46a534e2623db44a076b73ce4d0c55 --- /dev/null +++ b/images/Shaft_01283.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af76527d330b439d130c1008ad9128ff5105bc7a97560ce732dccb0d589b7615 +size 98940 diff --git a/images/Shaft_01284.png b/images/Shaft_01284.png new file mode 100644 index 0000000000000000000000000000000000000000..77856cd18d1e566bf7795cfee274f20a979c5618 --- /dev/null +++ b/images/Shaft_01284.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1319a1ee20d280c363c8bdc334ed950455cc86da03bdba3e1e260728e87ebdc +size 95414 diff --git a/images/Shaft_01285.png b/images/Shaft_01285.png new file mode 100644 index 0000000000000000000000000000000000000000..645edff10c5424e72218a1a8ba0f4157d3103f0b --- /dev/null +++ b/images/Shaft_01285.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:673e983370d3995f1a6ff74e4706f133ee14b8ce286ad647b0d9733138fb596d +size 88838 diff --git a/images/Shaft_01286.png b/images/Shaft_01286.png new file mode 100644 index 0000000000000000000000000000000000000000..8594b89e56b6778503556230bfb2ce71123d9839 --- /dev/null +++ b/images/Shaft_01286.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef3b593cc2ff119efee8dd71e5677d762ea42aecf21a59340cb824c02c36f7e +size 103305 diff --git a/images/Shaft_01287.png b/images/Shaft_01287.png new file mode 100644 index 0000000000000000000000000000000000000000..6b468ed3f6c8812014fa3f2944ffee97f7e6f9f4 --- /dev/null +++ b/images/Shaft_01287.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd668acf7dbed379c4b5fdfb6a947c9a9c5dd8331b9a636fdd5d79809eefc5ab +size 96392 diff --git a/images/Shaft_01288.png b/images/Shaft_01288.png new file mode 100644 index 0000000000000000000000000000000000000000..1371943b9d46258a96b2a31c59b80fb7e73cead1 --- /dev/null +++ b/images/Shaft_01288.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1d429b25d2929f2793a9c2806a5f67fa499fca7105871960be9048ddd3d60f3 +size 110981 diff --git a/images/Shaft_01289.png b/images/Shaft_01289.png new file mode 100644 index 0000000000000000000000000000000000000000..a77a53af2652256f70d912220f9c11d8b22fdf05 --- /dev/null +++ b/images/Shaft_01289.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b78a46eadd44896648c9e711d672a1782460216fa7b76f97d3a345f0895a7864 +size 100645 diff --git a/images/Shaft_01290.png b/images/Shaft_01290.png new file mode 100644 index 0000000000000000000000000000000000000000..aa102f9fed2775634690593066f1d0ad4f3390e5 --- /dev/null +++ b/images/Shaft_01290.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a7654a58850e9ce135a8183c4bef4f5f59af7e6fc779c8f09ce4406a6472802 +size 92142 diff --git a/images/Shaft_01291.png b/images/Shaft_01291.png new file mode 100644 index 0000000000000000000000000000000000000000..f2c56324d69f69597275ddcb7ade9c887eeecda6 --- /dev/null +++ b/images/Shaft_01291.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ef3d8a2b163e07cbac0e7f38d67462c830950fed4e516690eb42e110a6728db +size 103810 diff --git a/images/Shaft_01292.png b/images/Shaft_01292.png new file mode 100644 index 0000000000000000000000000000000000000000..2cca19e3007da75c796b29843c475ae23708c023 --- /dev/null +++ b/images/Shaft_01292.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c5058fe9690275899f3257db6545bdab8204f7ca6caef78c54b88e34441a3f2 +size 91657 diff --git a/images/Shaft_01293.png b/images/Shaft_01293.png new file mode 100644 index 0000000000000000000000000000000000000000..1f9c708ff7c6a2cb190aa921b9c751d70df27453 --- /dev/null +++ b/images/Shaft_01293.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2481e58afc64eda459615f3b110d16d3c91a4fd3a46ffbfc25ec25219da2ad7 +size 98997 diff --git a/images/Shaft_01294.png b/images/Shaft_01294.png new file mode 100644 index 0000000000000000000000000000000000000000..988ea19ee7fe3aeee778d1b847e06e377a7759e8 --- /dev/null +++ b/images/Shaft_01294.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:075e2ae211de4bb5407709892a9a0bfcd1612415b7676a7536dc3eed96bff302 +size 66792 diff --git a/images/Shaft_01295.png b/images/Shaft_01295.png new file mode 100644 index 0000000000000000000000000000000000000000..fd882ca0f4e0d35f1fd74e1592a7344711de2375 --- /dev/null +++ b/images/Shaft_01295.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dce11d68929651dd34ed5c537ab7efdefe729d8eb829da0f8d0a1d1ed432fe3e +size 82593 diff --git a/images/Shaft_01296.png b/images/Shaft_01296.png new file mode 100644 index 0000000000000000000000000000000000000000..37639707976980cb0e4423ac5265f200c4e56f80 --- /dev/null +++ b/images/Shaft_01296.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f03184ab744c57519e59cff7ea229bc66048f611ba4456eca92506edfcd85bb +size 117560 diff --git a/images/Shaft_01297.png b/images/Shaft_01297.png new file mode 100644 index 0000000000000000000000000000000000000000..d4e6384d9ba583a7b27fe7105ede217096bdf30a --- /dev/null +++ b/images/Shaft_01297.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5486e11c6801271344a798b6a016e3a573931961cb2f4e58cc71d40f59eae447 +size 93942 diff --git a/images/Shaft_01298.png b/images/Shaft_01298.png new file mode 100644 index 0000000000000000000000000000000000000000..72f46267c1e4b6aa51dec8b2ea567270e630328b --- /dev/null +++ b/images/Shaft_01298.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a85a1f51deb69a8368c4b3de149a41fa4f1b7a7a03359047baf6a8037790dea6 +size 81956 diff --git a/images/Shaft_01299.png b/images/Shaft_01299.png new file mode 100644 index 0000000000000000000000000000000000000000..6892c70f34852167cdede1ba7fff8810f09232c4 --- /dev/null +++ b/images/Shaft_01299.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6ecb00bc6f62ea9c25bd0fd350ed4c247564f3b9902205cb3958261ee31b906 +size 85055 diff --git a/images/Shaft_01300.png b/images/Shaft_01300.png new file mode 100644 index 0000000000000000000000000000000000000000..bb4f821b35705b082ac1978369bd2aebda8bf8bc --- /dev/null +++ b/images/Shaft_01300.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ad7356d892a001dd7b7bf735944f6a021919e50c8dae901f354bea7603a1155 +size 70605 diff --git a/images/Shaft_01301.png b/images/Shaft_01301.png new file mode 100644 index 0000000000000000000000000000000000000000..4f79764ff74d11c27e7baed85270cc6d11239ab7 --- /dev/null +++ b/images/Shaft_01301.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:846245faebcbc1d781895130fc3980fbbad648d9f24fd38bfeef335bfb0baaff +size 67933 diff --git a/images/Shaft_01302.png b/images/Shaft_01302.png new file mode 100644 index 0000000000000000000000000000000000000000..e829d673dc25b0aed43e9ee1d9f599622ccc07f3 --- /dev/null +++ b/images/Shaft_01302.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:339c7605590b80f1e24e430e638f658c27076ca4997d3607c6509aa5f4e14ffc +size 74988 diff --git a/images/Shaft_01303.png b/images/Shaft_01303.png new file mode 100644 index 0000000000000000000000000000000000000000..4d340e1c272174fc0e04684a5d95a1060b43491e --- /dev/null +++ b/images/Shaft_01303.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e0378d0c935dc92e3608179ce369138518e39f5073bcf95125091445d0edc0 +size 78850 diff --git a/images/Shaft_01304.png b/images/Shaft_01304.png new file mode 100644 index 0000000000000000000000000000000000000000..2a24b8e17c1194ad0c554a7e9f50ea442b898d84 --- /dev/null +++ b/images/Shaft_01304.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4ee23bc457707bfc380634ac6cb1a764de6181b5c704a69ea011f100bd3897e +size 104097 diff --git a/images/Shaft_01305.png b/images/Shaft_01305.png new file mode 100644 index 0000000000000000000000000000000000000000..a52841ebdb9329529b35aab4bf5fbffa45580f8b --- /dev/null +++ b/images/Shaft_01305.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7df15fb86d620f0e45c2316e3e4248aba23bddb5646a8e321d8c4bd68145b078 +size 83343 diff --git a/images/Shaft_01306.png b/images/Shaft_01306.png new file mode 100644 index 0000000000000000000000000000000000000000..8323ef8d3980ab9db63720cc336e9d680719a0ab --- /dev/null +++ b/images/Shaft_01306.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd85023b943539551dc5c5f7c9f6fb9c21b97b2dfa4f0f2e2e66d0ac7c5bcc4b +size 70839 diff --git a/images/Shaft_01307.png b/images/Shaft_01307.png new file mode 100644 index 0000000000000000000000000000000000000000..c57485ff8a218e7c4ca53784eef74f52f0f65e6e --- /dev/null +++ b/images/Shaft_01307.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37d1623c77a41fb71368604b12ffac6d6c17360c0c545bb5a159107b24a0e75e +size 90087 diff --git a/images/Shaft_01308.png b/images/Shaft_01308.png new file mode 100644 index 0000000000000000000000000000000000000000..e7b6e7f457ef74265f746ad6298e9100a359628f --- /dev/null +++ b/images/Shaft_01308.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fbb26619c61717f0f2cd4f84c6e4e84c4a09909b43774fc8a0049f88aa63e54 +size 109810 diff --git a/images/Shaft_01309.png b/images/Shaft_01309.png new file mode 100644 index 0000000000000000000000000000000000000000..a5fcb50d22a60f3214496b77819ee0c99f3a98b7 --- /dev/null +++ b/images/Shaft_01309.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ed7ba5cc57e14d1dcbd3ec5a943e6ab372a0baba42821258dfe3e5450797770 +size 71149 diff --git a/images/Shaft_01310.png b/images/Shaft_01310.png new file mode 100644 index 0000000000000000000000000000000000000000..94c80201a7e7f14f04d6c1c7ca3cddba4d32e1b3 --- /dev/null +++ b/images/Shaft_01310.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b61546a4d9933e56ef7d937ceb75f045def9060e675d904a2ec71d3d3993ef9 +size 73887 diff --git a/images/Shaft_01311.png b/images/Shaft_01311.png new file mode 100644 index 0000000000000000000000000000000000000000..15e084e2348c7e57980c730e2e7d01afd22c2a2a --- /dev/null +++ b/images/Shaft_01311.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d15d540ba64017c68c76502efc3257f66cde0bc69b52c91f3ff21c1a154d5206 +size 102399 diff --git a/images/Shaft_01312.png b/images/Shaft_01312.png new file mode 100644 index 0000000000000000000000000000000000000000..e081e2074a56615a93eb2c7e59d3f2932f94a333 --- /dev/null +++ b/images/Shaft_01312.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:027d860dbc79fcbd2340dbb74bc4491d9333ff45e26b239c1bfed470fd1e66b1 +size 81568 diff --git a/images/Shaft_01313.png b/images/Shaft_01313.png new file mode 100644 index 0000000000000000000000000000000000000000..17103d630ae4b7fa6ff54e1dfb53d075593fba78 --- /dev/null +++ b/images/Shaft_01313.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2682a3afe6fb214bd42139590fa2d34e931155b8b3d435286b5ab66446723f76 +size 89060 diff --git a/images/Shaft_01314.png b/images/Shaft_01314.png new file mode 100644 index 0000000000000000000000000000000000000000..8036eef85b9f0860419c1641d5cd805b669da931 --- /dev/null +++ b/images/Shaft_01314.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0eb6bf3e4892e6f6bd4a8e6226f07d1aaf3353b8d74e4237efdcdf4303d658a7 +size 92629 diff --git a/images/Shaft_01315.png b/images/Shaft_01315.png new file mode 100644 index 0000000000000000000000000000000000000000..ae22c2c96bfa06604aae702abfcb24060015689b --- /dev/null +++ b/images/Shaft_01315.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aff98907be998f9a0a3abe600b503a582882cbacc334d8b5030bb04a6030e87a +size 82482 diff --git a/images/Shaft_01316.png b/images/Shaft_01316.png new file mode 100644 index 0000000000000000000000000000000000000000..d6dd256579a76062cad6a6d5dd3c552a863ba7c4 --- /dev/null +++ b/images/Shaft_01316.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa147ceb04c95d12a1372eb6ea822e0821ae1c92455bb4b635534b3b254f198c +size 90253 diff --git a/images/Shaft_01317.png b/images/Shaft_01317.png new file mode 100644 index 0000000000000000000000000000000000000000..e182a401f53278a9e0395990f6d2673c7146c16f --- /dev/null +++ b/images/Shaft_01317.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bba4186451a5d356190d6d126fe9bf4ae37c4762911fc6b1c489dca2b94b55eb +size 91269 diff --git a/images/Shaft_01318.png b/images/Shaft_01318.png new file mode 100644 index 0000000000000000000000000000000000000000..bca1349f7b28d2475d106171c75c31ab174704b9 --- /dev/null +++ b/images/Shaft_01318.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5aa571938b1c18575b00694dc1ecb1600afe0a069aec48be35d7f606dd825832 +size 101024 diff --git a/images/Shaft_01319.png b/images/Shaft_01319.png new file mode 100644 index 0000000000000000000000000000000000000000..20d6390ab3157008fb69308c62d576474912f4a8 --- /dev/null +++ b/images/Shaft_01319.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba756e1b16fa386fb3d94df1a529c7eab9832e8cda80b2f2c95bd257a300fad9 +size 81219 diff --git a/images/Shaft_01320.png b/images/Shaft_01320.png new file mode 100644 index 0000000000000000000000000000000000000000..a0875293a965b66bcc84cd9d92f913db5be9aa0c --- /dev/null +++ b/images/Shaft_01320.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68e549ed201b98d14d9aaf2ea7eedcbc69a23ba2bcb0c10f25bb8e738a88d245 +size 74294 diff --git a/images/Shaft_01321.png b/images/Shaft_01321.png new file mode 100644 index 0000000000000000000000000000000000000000..532b1468844478dca4429a6d7797c1d001e13037 --- /dev/null +++ b/images/Shaft_01321.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c62604562f67e308b0c67ca226a88174c0431f441038235ca2befc47c070be8 +size 99061 diff --git a/images/Shaft_01322.png b/images/Shaft_01322.png new file mode 100644 index 0000000000000000000000000000000000000000..cda9e6bb471cbfbf8adb288b336691ae04769bea --- /dev/null +++ b/images/Shaft_01322.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e048a88f392e423f316d84b81fbae54ec04bab3d84d0030dcbe3ec887d0adf35 +size 77011 diff --git a/images/Shaft_01323.png b/images/Shaft_01323.png new file mode 100644 index 0000000000000000000000000000000000000000..dbbeaeef5dc6813db920ffd54b2449ece2038fcf --- /dev/null +++ b/images/Shaft_01323.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cde74c55aba0f2cfeac92fa4e1669dad17b902801da98f7b325a567e916bce4d +size 82789 diff --git a/images/Shaft_01324.png b/images/Shaft_01324.png new file mode 100644 index 0000000000000000000000000000000000000000..48ed034b2f536db6c636503895989c6abda5b4ec --- /dev/null +++ b/images/Shaft_01324.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d59869a9d87c9ef7fa989ba8537f7933c9d131a6face7e7554c404811bb112ee +size 107104 diff --git a/images/Shaft_01325.png b/images/Shaft_01325.png new file mode 100644 index 0000000000000000000000000000000000000000..77e4da875b764193d8c9af61419554a2ebdfe1a3 --- /dev/null +++ b/images/Shaft_01325.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:871792a83fa794b2284b8c3d22f97af41fd16c6773242ab82c95dae150202bb5 +size 109595 diff --git a/images/Shaft_01326.png b/images/Shaft_01326.png new file mode 100644 index 0000000000000000000000000000000000000000..81cca27e2caf0a6097d5f2e752eefd500d232ae2 --- /dev/null +++ b/images/Shaft_01326.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b7ead155348dac3ea4f9300ee88ae3b2958f1232809006da14d9f5c2d0f5165 +size 80982 diff --git a/images/Shaft_01327.png b/images/Shaft_01327.png new file mode 100644 index 0000000000000000000000000000000000000000..b91c52d6303b6813b11a11aecd4d610ebe67693d --- /dev/null +++ b/images/Shaft_01327.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81d9fb0e9f097bd83a2cf44ee136099bbc519d3bca9d21b3a168602d3c08fe10 +size 101484 diff --git a/images/Shaft_01328.png b/images/Shaft_01328.png new file mode 100644 index 0000000000000000000000000000000000000000..7c2d5a02effdfdf4919da2c95ec25232f4a5ac8e --- /dev/null +++ b/images/Shaft_01328.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f57eda1e334d24c80f2d6e53da761fd19b91f7324755044c5444653ffd3a963 +size 84228 diff --git a/images/Shaft_01329.png b/images/Shaft_01329.png new file mode 100644 index 0000000000000000000000000000000000000000..92c5bc982d1d7c62cc274e1ab21ad19150a42188 --- /dev/null +++ b/images/Shaft_01329.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:542e011ef12f991462f65c466f78605933a276c25f350749e26acb2a7a146252 +size 89116 diff --git a/images/Shaft_01330.png b/images/Shaft_01330.png new file mode 100644 index 0000000000000000000000000000000000000000..11de5721a97f3df12c35e3d4225769f7872441d5 --- /dev/null +++ b/images/Shaft_01330.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:099ee6d92983b8bba33c7f3e5af8f38c6278d72c83df4b13da5b8464f678dced +size 73500 diff --git a/images/Shaft_01331.png b/images/Shaft_01331.png new file mode 100644 index 0000000000000000000000000000000000000000..429637dcb8056183cb5bfaaa0a6873892a39d763 --- /dev/null +++ b/images/Shaft_01331.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed11622173dfcaf26d1b7c14ab61caf9602b002b46786ad01765625cb530a1ef +size 89916 diff --git a/images/Shaft_01332.png b/images/Shaft_01332.png new file mode 100644 index 0000000000000000000000000000000000000000..63ab61b1c228132d275368cd236c0daa81270cf1 --- /dev/null +++ b/images/Shaft_01332.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53b716da9da90c2125c8b38c29062bbc182ab15f4b1d31ced351a0f751c69380 +size 82090 diff --git a/images/Shaft_01333.png b/images/Shaft_01333.png new file mode 100644 index 0000000000000000000000000000000000000000..c5c8b111aa3adf409342e9abcc30c5050597fee4 --- /dev/null +++ b/images/Shaft_01333.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f60304f9076471ec466daf14dc8b853da611a59befe74e83ec39ae749753f41a +size 108574 diff --git a/images/Shaft_01334.png b/images/Shaft_01334.png new file mode 100644 index 0000000000000000000000000000000000000000..74127511c1fe86176936facc66069cfbf9af6583 --- /dev/null +++ b/images/Shaft_01334.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd7a5354b9585b43a6142c68929c221baa0e2a5ec3dbc1231a11283d36baf8c0 +size 69516 diff --git a/images/Shaft_01335.png b/images/Shaft_01335.png new file mode 100644 index 0000000000000000000000000000000000000000..1a768701b89a757113879b46728830ccc594c6ea --- /dev/null +++ b/images/Shaft_01335.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08e7033c9d5b8c551cba782ee06b7b4a43c8b76234f4ba4dfb48860fd479f134 +size 70337 diff --git a/images/Shaft_01336.png b/images/Shaft_01336.png new file mode 100644 index 0000000000000000000000000000000000000000..a68615815713e27329a722a561e7f9b5b9d0e4aa --- /dev/null +++ b/images/Shaft_01336.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1db33a56d2b9a532acb60a125f33f55048db07da97615e5ac6954388cc47078d +size 87684 diff --git a/images/Shaft_01337.png b/images/Shaft_01337.png new file mode 100644 index 0000000000000000000000000000000000000000..42af1aad1e55d2fc509e6880dea188a5631f4740 --- /dev/null +++ b/images/Shaft_01337.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3bd0f8c05efcecef6d8fc40e1947d21591d73dfaff88ea147d4434c6b3b6377 +size 89850 diff --git a/images/Shaft_01338.png b/images/Shaft_01338.png new file mode 100644 index 0000000000000000000000000000000000000000..02de608798cd4eef75d6d8ed1e3a47c02037670e --- /dev/null +++ b/images/Shaft_01338.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c6ae15e5a8ff9b5a03b63a2a6c3721b5c9420b0c7fbe510b3fbf45ee2679426 +size 91523 diff --git a/images/Shaft_01339.png b/images/Shaft_01339.png new file mode 100644 index 0000000000000000000000000000000000000000..a68606955097b610a2cde86000f2207e300d7422 --- /dev/null +++ b/images/Shaft_01339.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90cff3f886cea0b964a77026f26f6cd71e64137f57ccb3f2d3b76b5513b12bfd +size 71742 diff --git a/images/Shaft_01340.png b/images/Shaft_01340.png new file mode 100644 index 0000000000000000000000000000000000000000..ea4b19618ba5fd14d8b3025237fd258f369791f9 --- /dev/null +++ b/images/Shaft_01340.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46cf69eb2ef716b1513811fca24b19ba9842369bfebf91488324bdb7323a9382 +size 92812 diff --git a/images/Shaft_01341.png b/images/Shaft_01341.png new file mode 100644 index 0000000000000000000000000000000000000000..f9b630c80f99269b178299e08332252a4324c217 --- /dev/null +++ b/images/Shaft_01341.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a718b7f8b1f76ac3bc49660d527dba23443251329a8fa78751f3e08595cc6e2a +size 78970 diff --git a/images/Shaft_01342.png b/images/Shaft_01342.png new file mode 100644 index 0000000000000000000000000000000000000000..2690f651198e2413c2669a69ac167a708dc3f217 --- /dev/null +++ b/images/Shaft_01342.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ee14937e2884fdb29c9e123ebb6069739ee0725d064dca565600a5cdf8dc904 +size 103730 diff --git a/images/Shaft_01343.png b/images/Shaft_01343.png new file mode 100644 index 0000000000000000000000000000000000000000..1f438bc43eb429b49a8551cc7be9a39f4f6d29b6 --- /dev/null +++ b/images/Shaft_01343.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46c272390814167fcc98a8678ea54a7b806d692a04c706c612abedaf4a6fad72 +size 99209 diff --git a/images/Shaft_01344.png b/images/Shaft_01344.png new file mode 100644 index 0000000000000000000000000000000000000000..276414c713b155bdc425cd9a4ca92d57e2cc2f7e --- /dev/null +++ b/images/Shaft_01344.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3850c89111ab4e10b10a9ea07890a96313cbae975c20027994ef4d78a53e927 +size 84372 diff --git a/images/Shaft_01345.png b/images/Shaft_01345.png new file mode 100644 index 0000000000000000000000000000000000000000..9075d513dce4159617f491a051bb0a202c3c6d4a --- /dev/null +++ b/images/Shaft_01345.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55a477f8cd10f319bbdfe66bcb7f075ed661ea3a783ab5d3b418b1dc4321484e +size 78841 diff --git a/images/Shaft_01346.png b/images/Shaft_01346.png new file mode 100644 index 0000000000000000000000000000000000000000..0895b153b847d523f90dfb9db9bca25ecc26a431 --- /dev/null +++ b/images/Shaft_01346.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b7ecfa31ad217eeaf570317c5dd310b7fd636cf827ab68cc61fd14dc89aea68 +size 70171 diff --git a/images/Shaft_01347.png b/images/Shaft_01347.png new file mode 100644 index 0000000000000000000000000000000000000000..b9f9b117c7d0c92cb2eb02d4fe67621bfef48907 --- /dev/null +++ b/images/Shaft_01347.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:917009000fedcc783106bb3a58f4ddf73856bf2c962b58cbaf763f34f3883e0b +size 85127 diff --git a/images/Shaft_01348.png b/images/Shaft_01348.png new file mode 100644 index 0000000000000000000000000000000000000000..8aae1d0d8d9de0016f1688caec1ddeb351923d5b --- /dev/null +++ b/images/Shaft_01348.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9fa6a7f9e38f570faa7a2aba3bbf82ce6efb30e9e47480a5da10f2fc3a7eac3 +size 80053 diff --git a/images/Shaft_01349.png b/images/Shaft_01349.png new file mode 100644 index 0000000000000000000000000000000000000000..f14c3251c3d13568b5fada76ca39dc438df9079b --- /dev/null +++ b/images/Shaft_01349.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84d8c513ce4be2c0000ce444d5818d80cf26d1af2a290bc4f420dfe37cd94545 +size 77718 diff --git a/images/Shaft_01350.png b/images/Shaft_01350.png new file mode 100644 index 0000000000000000000000000000000000000000..4b258d34c18164dac6a106e8834c688c8b3238ef --- /dev/null +++ b/images/Shaft_01350.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9bc1b0fbf27d4fc0512cd67809f9bfdad8fd90ac1b792a353751773e6fe57b7 +size 89019 diff --git a/images/Shaft_01351.png b/images/Shaft_01351.png new file mode 100644 index 0000000000000000000000000000000000000000..6343071d6b3d21ff39cfeaf3944818080facebde --- /dev/null +++ b/images/Shaft_01351.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90eaeebce05d3c843dd2b536bba89c2af358361a42841a00ad86686b142b0152 +size 93837 diff --git a/images/Shaft_01352.png b/images/Shaft_01352.png new file mode 100644 index 0000000000000000000000000000000000000000..9746719fb32d66e92a36b52b79c686cd9fad7d88 --- /dev/null +++ b/images/Shaft_01352.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0cbfcb4359ce82756fdfc6c2771b0c03167fbf8a455032d3782498854218ad4 +size 73291 diff --git a/images/Shaft_01353.png b/images/Shaft_01353.png new file mode 100644 index 0000000000000000000000000000000000000000..a72e09d36562c8c54f7f14bdafa0cf972d717eda --- /dev/null +++ b/images/Shaft_01353.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:956690f26ba3a3f10a0bac8a232376c9cff66c6b3783010e10a4acaa13efdf30 +size 72298 diff --git a/images/Shaft_01354.png b/images/Shaft_01354.png new file mode 100644 index 0000000000000000000000000000000000000000..8e4b64a2e946d6466c35a1210c8a75ddb9474b7c --- /dev/null +++ b/images/Shaft_01354.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8d6eab1aabf24f10a7decf32944a8d6bd1af2d950b4eaa1acfa51654dea6c52 +size 81171 diff --git a/images/Shaft_01355.png b/images/Shaft_01355.png new file mode 100644 index 0000000000000000000000000000000000000000..9cc33dbbfe7b64b5fe896753dab11d34084ebcf5 --- /dev/null +++ b/images/Shaft_01355.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:868f5e9bbb96f8450d16ebfd32986909d60cf1575a3817eba815e8eaeb9d5e21 +size 94285 diff --git a/images/Shaft_01356.png b/images/Shaft_01356.png new file mode 100644 index 0000000000000000000000000000000000000000..84e0737d5b1e0fc9d4a0b3381abd336b58d6ac55 --- /dev/null +++ b/images/Shaft_01356.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0afa3552661e54b9c549fc2e8f8f4cf47a9bba218c6803cba2a76c1b33aff6ed +size 81386 diff --git a/images/Shaft_01357.png b/images/Shaft_01357.png new file mode 100644 index 0000000000000000000000000000000000000000..31760f5fc38bc623ce2e57fbad371c512b8ee0ea --- /dev/null +++ b/images/Shaft_01357.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:222818480bb8d91931c9cfb8e7996d8f9436453438d63a62fd6e6b0e0ee1821b +size 91796 diff --git a/images/Shaft_01358.png b/images/Shaft_01358.png new file mode 100644 index 0000000000000000000000000000000000000000..5f5a3d032795b50af5f9a8f466fc5427efe0894b --- /dev/null +++ b/images/Shaft_01358.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fae4f7c5e9a045443f188874e45ab4aa0a5b92fe73fbc73aff00aae3bc59d79 +size 83538 diff --git a/images/Shaft_01359.png b/images/Shaft_01359.png new file mode 100644 index 0000000000000000000000000000000000000000..004d7794216f46a8010983b050440e47f92c7b3a --- /dev/null +++ b/images/Shaft_01359.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:622829644d03a6133fae3df35abb807189c0ff8e34576ca6681448db1e75c0f9 +size 90025 diff --git a/images/Shaft_01360.png b/images/Shaft_01360.png new file mode 100644 index 0000000000000000000000000000000000000000..d1ade19d2fb3e01bee39a5032d5ffc3595fb05cd --- /dev/null +++ b/images/Shaft_01360.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72b0e0f21a5aa2e460e0ee431c0e1cf5b3396b49db56218fc003020c37d0af72 +size 72080 diff --git a/images/Shaft_01361.png b/images/Shaft_01361.png new file mode 100644 index 0000000000000000000000000000000000000000..c1e3c10c76bd9aba8faf8bed2241872dcd7242a1 --- /dev/null +++ b/images/Shaft_01361.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ab94d1f82273073d66c2cb5bf7720be9730aa093cefc6be7ae4d77aa266bc84 +size 82711 diff --git a/images/Shaft_01362.png b/images/Shaft_01362.png new file mode 100644 index 0000000000000000000000000000000000000000..a7e6476c564de2ef19e0c58714115a0063597805 --- /dev/null +++ b/images/Shaft_01362.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d52b9fbaef3393916a0f75c1886e8f0e3be2420a45ae657129d4eadbd575110d +size 69490 diff --git a/images/Shaft_01363.png b/images/Shaft_01363.png new file mode 100644 index 0000000000000000000000000000000000000000..158505e422d125494e3592695a1ca5cf11f73fb9 --- /dev/null +++ b/images/Shaft_01363.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9411c4ed946b593df105deb7306925065762a2b23bdccb0f09e8fe4a3b89c3d4 +size 121123 diff --git a/images/Shaft_01364.png b/images/Shaft_01364.png new file mode 100644 index 0000000000000000000000000000000000000000..a8699ee8914677419e9984c08e00c0e30a61be59 --- /dev/null +++ b/images/Shaft_01364.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6de2ea13a9cf3a90297d8446a9b87d696f4d5ccd224620d25fe53bdb4579e48 +size 79911 diff --git a/images/Shaft_01365.png b/images/Shaft_01365.png new file mode 100644 index 0000000000000000000000000000000000000000..a61e0d8e415a98628e5a9b8f9450cf3d58ec7e6b --- /dev/null +++ b/images/Shaft_01365.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fc99105da325590fa1b76c289575356f43ff79721774f8330af9d79b8a068d6 +size 88001 diff --git a/images/Shaft_01366.png b/images/Shaft_01366.png new file mode 100644 index 0000000000000000000000000000000000000000..9925bcfc5b3521358ed5204bad8d335eb523221d --- /dev/null +++ b/images/Shaft_01366.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0c8b39185f48411c9bad1fbaad4f5677ae3cfcc3ba31e05575536eea99289a5 +size 81519 diff --git a/images/Shaft_01367.png b/images/Shaft_01367.png new file mode 100644 index 0000000000000000000000000000000000000000..1e3620f541d0094b02927f7067d9c8e6dfb4f5f8 --- /dev/null +++ b/images/Shaft_01367.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2225a8d7b805f7fe5761aaa1c375474f2ac5475204cb9ccfa3e210395112698 +size 69268 diff --git a/images/Shaft_01368.png b/images/Shaft_01368.png new file mode 100644 index 0000000000000000000000000000000000000000..77920eb7907cfbaad131851f6b874b904205d60f --- /dev/null +++ b/images/Shaft_01368.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83163ed9d8cf2da553b70b60b17a73966e4045f92b80ce3ff87e3332a6af55c3 +size 70450 diff --git a/images/Shaft_01369.png b/images/Shaft_01369.png new file mode 100644 index 0000000000000000000000000000000000000000..f243f6df7c65970891356e139a8d2f21fb94e31d --- /dev/null +++ b/images/Shaft_01369.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b74a868e19b9b0fa132553668d86a11a80a4a5748843b34aa6048bddd5af9bb +size 78480 diff --git a/images/Shaft_01370.png b/images/Shaft_01370.png new file mode 100644 index 0000000000000000000000000000000000000000..a25a776177c7acd48956442376099313150eb893 --- /dev/null +++ b/images/Shaft_01370.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4fb026362b2ff775f9cd17226af2285a87d5efdaa0b7622567d70c328b6e9e9 +size 82321 diff --git a/images/Shaft_01371.png b/images/Shaft_01371.png new file mode 100644 index 0000000000000000000000000000000000000000..e1646e8612fadf004b4304f46af2b2d36c73489f --- /dev/null +++ b/images/Shaft_01371.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac7a25719e5faed0d0d2c6a620d1bdee1505783549408e68256c7056136e8a77 +size 82875 diff --git a/images/Shaft_01372.png b/images/Shaft_01372.png new file mode 100644 index 0000000000000000000000000000000000000000..f679bb559c602b66c8583352da2b0b6ff1b12021 --- /dev/null +++ b/images/Shaft_01372.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a03bbf5d07e6c8e2e5822e80c46bedd8035edc7382d28d17a439502a2060aa3a +size 88763 diff --git a/images/Shaft_01373.png b/images/Shaft_01373.png new file mode 100644 index 0000000000000000000000000000000000000000..1bf5ec8aa39408fce9b8ddafec3e2d464f30645c --- /dev/null +++ b/images/Shaft_01373.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:473757352c4ff8f987490806481cffe720e58e017e78b1c752b5f13e1dff8df7 +size 81680 diff --git a/images/Shaft_01374.png b/images/Shaft_01374.png new file mode 100644 index 0000000000000000000000000000000000000000..d3a745d079ac728e796473f5fe6b731bb8ee1e05 --- /dev/null +++ b/images/Shaft_01374.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:530ab5f850385923fb3e6a043ca2d7291137e1a0d9ab1f01be2d75b1ab521a1c +size 76032 diff --git a/images/Shaft_01375.png b/images/Shaft_01375.png new file mode 100644 index 0000000000000000000000000000000000000000..1b54d358eafc4d526f18322e3da78aee1e7d367c --- /dev/null +++ b/images/Shaft_01375.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f94b04b5bc8214e43731cb51ecc44287eb0fd0cff2a3b0058eaace02051f2315 +size 92732 diff --git a/images/Shaft_01376.png b/images/Shaft_01376.png new file mode 100644 index 0000000000000000000000000000000000000000..092a15be9e046f413a1149faa5d46b7948d085da --- /dev/null +++ b/images/Shaft_01376.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94a5970283bd494a70a91f345cde2a9246df6af5b452b95c65297c8784947044 +size 71241 diff --git a/images/Shaft_01377.png b/images/Shaft_01377.png new file mode 100644 index 0000000000000000000000000000000000000000..d192c6e3b585df32c9c6edb033f74aab13a8fa4c --- /dev/null +++ b/images/Shaft_01377.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e172d141444f61c8b939c7d7d508b9596e3c20a2d01a2dedca63f0ecdb22ea74 +size 74008 diff --git a/images/Shaft_01378.png b/images/Shaft_01378.png new file mode 100644 index 0000000000000000000000000000000000000000..8513c591acb13f600cc68fbc594c7f9ab6af3403 --- /dev/null +++ b/images/Shaft_01378.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bfd80021e345b444518a5e78cf6c79853a4ec27f875258f282cbdc6dd2338fc +size 94149 diff --git a/images/Shaft_01379.png b/images/Shaft_01379.png new file mode 100644 index 0000000000000000000000000000000000000000..e1a21fa24ffc09485a14221fed1476a49cfe4d62 --- /dev/null +++ b/images/Shaft_01379.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f5e9691c8d28017571f83d2700f23df6a982b928e06dd67cf99e534b074f241 +size 82481 diff --git a/images/Shaft_01380.png b/images/Shaft_01380.png new file mode 100644 index 0000000000000000000000000000000000000000..aeb91d103441195b70f12fccee7e83cb8af1381d --- /dev/null +++ b/images/Shaft_01380.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff5e71f19e53a4404219e4e0ff6aa83ddf311b6eeb2a3f05e88554cfb17baf81 +size 108555 diff --git a/images/Shaft_01381.png b/images/Shaft_01381.png new file mode 100644 index 0000000000000000000000000000000000000000..4e5388b11bb943d1b9304da58ae9bea1369e6f8c --- /dev/null +++ b/images/Shaft_01381.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b0e83d6d9aebcb8f919d1308b6a36e861277140b7bb22ac926eef76a9e05a4a +size 69600 diff --git a/images/Shaft_01382.png b/images/Shaft_01382.png new file mode 100644 index 0000000000000000000000000000000000000000..0d34ee52d4e9ec68d2d2711c20496c750beac084 --- /dev/null +++ b/images/Shaft_01382.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3dbd0b3a59ae36dbf8090de491df0b4c0a90bde5756e8f556116931c0a78d73 +size 72831 diff --git a/images/Shaft_01383.png b/images/Shaft_01383.png new file mode 100644 index 0000000000000000000000000000000000000000..51ca31454a5cd0fc5756a09e9b88dad224cc1adc --- /dev/null +++ b/images/Shaft_01383.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c47b76dd075d2eea9a5d0cf7d4dcb561265f8cbbdcd8b56dd86f6459ffba30c9 +size 70527 diff --git a/images/Shaft_01384.png b/images/Shaft_01384.png new file mode 100644 index 0000000000000000000000000000000000000000..aa8e7da094d991208df4e3cd1e87bb66998e9c21 --- /dev/null +++ b/images/Shaft_01384.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68994374bc6cf472f63da1742da99878134d50fb51ee80c65cf744cb02c98dde +size 83809 diff --git a/images/Shaft_01385.png b/images/Shaft_01385.png new file mode 100644 index 0000000000000000000000000000000000000000..e978b2b022bd5168215b0bde1c905ff9bc362a45 --- /dev/null +++ b/images/Shaft_01385.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58519047251acec424fdae8c73b0b8e2f1cd556db9a722706761d0ded0a5aa50 +size 98394 diff --git a/images/Shaft_01386.png b/images/Shaft_01386.png new file mode 100644 index 0000000000000000000000000000000000000000..09bb3a1bce0c6d2867434f7b0b894038d76490b5 --- /dev/null +++ b/images/Shaft_01386.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b3b2e7072d399d6afa4a05775f22d0ae4f90504614c000a44b7e10030bf2ad6 +size 78362 diff --git a/images/Shaft_01387.png b/images/Shaft_01387.png new file mode 100644 index 0000000000000000000000000000000000000000..0a93a20d3150052fa678d25e82622305bd982bed --- /dev/null +++ b/images/Shaft_01387.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34b655b6124bb369b00a0a52ec3a82b62d499184fd6c1af4099f7e8377ef8651 +size 99627 diff --git a/images/Shaft_01388.png b/images/Shaft_01388.png new file mode 100644 index 0000000000000000000000000000000000000000..68e1fb9fe340f7019220dbe83f0aa64060090937 --- /dev/null +++ b/images/Shaft_01388.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33c089f40e7319a760ff09bd28c152819a688f1dce29516be2d2ed7db4c53451 +size 95324 diff --git a/images/Shaft_01389.png b/images/Shaft_01389.png new file mode 100644 index 0000000000000000000000000000000000000000..f651ed0499e53ed0eea449c79a2045d6ca0fbf81 --- /dev/null +++ b/images/Shaft_01389.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e162a656fec0e5338a1698ade75e8cfd07f98caab6a0f57ece612b9262024ee +size 70038 diff --git a/images/Shaft_01390.png b/images/Shaft_01390.png new file mode 100644 index 0000000000000000000000000000000000000000..9dfa6ed722d568a2febbb166124e6b14040da81b --- /dev/null +++ b/images/Shaft_01390.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76fc54a1886db7e41389dc3e538c82de52ba9f8485b2e3eb86668b8451d0e268 +size 78413 diff --git a/images/Shaft_01391.png b/images/Shaft_01391.png new file mode 100644 index 0000000000000000000000000000000000000000..491b04eea5489914bdc515ec783412a82069fa85 --- /dev/null +++ b/images/Shaft_01391.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:380092c36318332994f97ebff5e241d0f3d5c6301689acefa3c07d556c5d2b42 +size 80906 diff --git a/images/Shaft_01392.png b/images/Shaft_01392.png new file mode 100644 index 0000000000000000000000000000000000000000..9cd2a044391a391094d4be85908f01ebfb198b93 --- /dev/null +++ b/images/Shaft_01392.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0f80f75e542b5ea937f64cafddd193f7a324684d0b963e22831b9ffc1cc9d81 +size 80727 diff --git a/images/Shaft_01393.png b/images/Shaft_01393.png new file mode 100644 index 0000000000000000000000000000000000000000..03320ed4ba1735b381953f83d14229d83792d276 --- /dev/null +++ b/images/Shaft_01393.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:668f3ba7a7fb4bcf4dc9d5f973981b8571e2e75b3e8e78132cddc937ae4a122c +size 72627 diff --git a/images/Shaft_01394.png b/images/Shaft_01394.png new file mode 100644 index 0000000000000000000000000000000000000000..aa8a4a82948ce28948adca771975a524ead38d74 --- /dev/null +++ b/images/Shaft_01394.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:206c35cb9437ac3fa2900af3e59d5ee5cfa33ac47d0888c9dd6a8ba6b06b88f1 +size 72420 diff --git a/images/Shaft_01395.png b/images/Shaft_01395.png new file mode 100644 index 0000000000000000000000000000000000000000..418a7b4784a7496f39ed9118c0e95a2830d028bb --- /dev/null +++ b/images/Shaft_01395.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f51ffdfac7a539fa8fc7d9f3cb5603f6417634f8c2c7d432bfecfbbfd8284277 +size 103438 diff --git a/images/Shaft_01396.png b/images/Shaft_01396.png new file mode 100644 index 0000000000000000000000000000000000000000..68c849e86c2587f4f12883d6ead0a65c671a15c2 --- /dev/null +++ b/images/Shaft_01396.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3da9ada17e1fafa67975b156e7ef8eb7d984d95bb7c689a1e44934f1a652b7bc +size 87406 diff --git a/images/Shaft_01397.png b/images/Shaft_01397.png new file mode 100644 index 0000000000000000000000000000000000000000..2b75a496b19d2d02ae2400a368f3dc73ee1a8a45 --- /dev/null +++ b/images/Shaft_01397.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bb1e69665eeda2c0eb533ef2937e72aed3cf32e7c490869a9278aba2f402990 +size 68044 diff --git a/images/Shaft_01398.png b/images/Shaft_01398.png new file mode 100644 index 0000000000000000000000000000000000000000..e4deccaa0a83c7236cdd3e62ecba062bf5ca707d --- /dev/null +++ b/images/Shaft_01398.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:988ec6ab1b9b00aaf0619809f2bfe50211bf9fa4b3953afa5040de67d15feaa9 +size 72542 diff --git a/images/Shaft_01399.png b/images/Shaft_01399.png new file mode 100644 index 0000000000000000000000000000000000000000..f706ead8509a65064bc002181b450cc9b46ca200 --- /dev/null +++ b/images/Shaft_01399.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:892f8f4bd96427684718ab59d1933d44a95f751ef610eb7cad126ba3cd4f1565 +size 74169 diff --git a/images/Shaft_01400.png b/images/Shaft_01400.png new file mode 100644 index 0000000000000000000000000000000000000000..5f0e6cfdef8dd6365480f234f8033b09181bbb8c --- /dev/null +++ b/images/Shaft_01400.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47c5a65f7278c79f942cbcadd8eaeac2eac2e76f995a9f1e73ffea74ac7a1603 +size 76797 diff --git a/images/Shaft_01401.png b/images/Shaft_01401.png new file mode 100644 index 0000000000000000000000000000000000000000..72dd9ce5f21f99cded87160d749867d7a66cbd8e --- /dev/null +++ b/images/Shaft_01401.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f49398cd9982dff78cb8f1b5f418781d4b684ee109bcc55a5b3788ce9093d1c +size 92655 diff --git a/images/Shaft_01402.png b/images/Shaft_01402.png new file mode 100644 index 0000000000000000000000000000000000000000..fdc4c62febfc8b73ae962396a4727ec35bae1e44 --- /dev/null +++ b/images/Shaft_01402.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3411ef555a37a1267dccd1a823d850a2f86d2d56052115786973b658b801a35a +size 80386 diff --git a/images/Shaft_01403.png b/images/Shaft_01403.png new file mode 100644 index 0000000000000000000000000000000000000000..9fa0f73948a47f9686c75561f7c7b50e2201a307 --- /dev/null +++ b/images/Shaft_01403.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:acf6d58b7dd6cb6a6471c56ed62ed7104992884eabe9f03d73a296633c10a057 +size 78038 diff --git a/images/Shaft_01404.png b/images/Shaft_01404.png new file mode 100644 index 0000000000000000000000000000000000000000..eae8e7372e8a186240335c0729bdfc48718e4aea --- /dev/null +++ b/images/Shaft_01404.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c58eddebedb4ea93d32d61752784ae837094b050255f73547b5a9a7770e1591d +size 65821 diff --git a/images/Shaft_01405.png b/images/Shaft_01405.png new file mode 100644 index 0000000000000000000000000000000000000000..bf5ed133e1f327031d1502fbfe518a707d2e3071 --- /dev/null +++ b/images/Shaft_01405.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d1ac1afcee1fb23e775bbeb706c57dcaf3fc6921cfeb80eb713cb50a918cf3a +size 68944 diff --git a/images/Shaft_01406.png b/images/Shaft_01406.png new file mode 100644 index 0000000000000000000000000000000000000000..ae90a483b4ae6c1e04e9f99982b02127a22b893f --- /dev/null +++ b/images/Shaft_01406.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9227b138cca3c2c941a2bd865a291a0a395d513578ab496984cfe41f13165e15 +size 72440 diff --git a/images/Shaft_01407.png b/images/Shaft_01407.png new file mode 100644 index 0000000000000000000000000000000000000000..84e38cbaf8efe037bc748ff00b8c0b8e5b8bd683 --- /dev/null +++ b/images/Shaft_01407.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b1fc54e622f7d51a25f88dfe4a022c9dab99220120f3af0ea0b1a6858c20990 +size 74402 diff --git a/images/Shaft_01408.png b/images/Shaft_01408.png new file mode 100644 index 0000000000000000000000000000000000000000..17917b9756e5c8090f55da82810aa4974c934922 --- /dev/null +++ b/images/Shaft_01408.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f95a94bc7f882249bce7431ca68c9862f6a74b6ddf19ad822cbaafc2c21b53f +size 85516 diff --git a/images/Shaft_01409.png b/images/Shaft_01409.png new file mode 100644 index 0000000000000000000000000000000000000000..24730b0042a5156f799f6554d99399d04b27d0e6 --- /dev/null +++ b/images/Shaft_01409.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0229eea10142ad7002bb7421225b7b9fb69dc81750626bfcbc65c61d9fc89e65 +size 94540 diff --git a/images/Shaft_01410.png b/images/Shaft_01410.png new file mode 100644 index 0000000000000000000000000000000000000000..76270ecd8e3f6f1ec927d1414bf7fafdfeb4500f --- /dev/null +++ b/images/Shaft_01410.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31ef09d02e6983931273c0e91e03104b0c6d29f21c4b57662d52a859b52c7e19 +size 66720 diff --git a/images/Shaft_01411.png b/images/Shaft_01411.png new file mode 100644 index 0000000000000000000000000000000000000000..65957fbd8ed461c224dd560cd436b7b93b741458 --- /dev/null +++ b/images/Shaft_01411.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:907ecabc4a231b3f127e7cfacffbbdc11e39aceabf8fed3ac845b93ab91ec330 +size 84805 diff --git a/images/Shaft_01412.png b/images/Shaft_01412.png new file mode 100644 index 0000000000000000000000000000000000000000..624ab97e091524a4104fd9b4e38be0825f6ca1ea --- /dev/null +++ b/images/Shaft_01412.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b4e5b5c53f62c0dfbd21149c6fa186d79456ad7cf877ff185a9348af3e7c7f8 +size 66969 diff --git a/images/Shaft_01413.png b/images/Shaft_01413.png new file mode 100644 index 0000000000000000000000000000000000000000..0a97592a5e7e8ff3cee0aa52bb4d2828bc0b9c97 --- /dev/null +++ b/images/Shaft_01413.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1b4345f21e5473165f02cfda34a79306fe4ac3679bf4936aea2c74065510396 +size 85222 diff --git a/images/Shaft_01414.png b/images/Shaft_01414.png new file mode 100644 index 0000000000000000000000000000000000000000..36bc285a575d7a76ed1be96cc589af9e145854d8 --- /dev/null +++ b/images/Shaft_01414.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d26d25943ebf597f80a3bf8ab75913b56650f654525beea07228efc7988cfc1f +size 88179 diff --git a/images/Shaft_01415.png b/images/Shaft_01415.png new file mode 100644 index 0000000000000000000000000000000000000000..6f6c76f2937e458fbae880bac8813eabda35d32e --- /dev/null +++ b/images/Shaft_01415.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:719d16ed4e67a6ba41a7f3625769bfab7835f9b22c2090abab88b85c22317b53 +size 93026 diff --git a/images/Shaft_01416.png b/images/Shaft_01416.png new file mode 100644 index 0000000000000000000000000000000000000000..315b98ab86854aa2ec0b245cb169ec7e6b95a55f --- /dev/null +++ b/images/Shaft_01416.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b2f8c766d608e06827db44733086de15674616897f724b2c0736e18f9a3d322 +size 78412 diff --git a/images/Shaft_01417.png b/images/Shaft_01417.png new file mode 100644 index 0000000000000000000000000000000000000000..3047991f3a8b50fdee28a8e4ee2134fec9031584 --- /dev/null +++ b/images/Shaft_01417.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4490eb45a735949306f0c4b5d1a1a221b9a81bb38d1a0a0b6e39c0aa35c68855 +size 98344 diff --git a/images/Shaft_01418.png b/images/Shaft_01418.png new file mode 100644 index 0000000000000000000000000000000000000000..8a25f9ad911e950a0d0469f6f41655fd3d8e76f1 --- /dev/null +++ b/images/Shaft_01418.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c26c00fdc5b8f2a3ceb7e06e1887ce1a2e3741c27160ef302c4e6bf3e9f02bb +size 79945 diff --git a/images/Shaft_01419.png b/images/Shaft_01419.png new file mode 100644 index 0000000000000000000000000000000000000000..b2de593576bc65c880e1e4003b009f683ca55786 --- /dev/null +++ b/images/Shaft_01419.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cbc89cd40aa476418f5d34008ca1cae8bfe2324d92daa1ff8eb8b087f7e79b8 +size 65541 diff --git a/images/Shaft_01420.png b/images/Shaft_01420.png new file mode 100644 index 0000000000000000000000000000000000000000..02b55c547173ee683a7b705d2af0a6acddc51934 --- /dev/null +++ b/images/Shaft_01420.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e4783dfc85abbf17b033dc4ae83924062e5f3bf13b0032741e8891f0b8d8e58 +size 66778 diff --git a/images/Shaft_01421.png b/images/Shaft_01421.png new file mode 100644 index 0000000000000000000000000000000000000000..f0a95451645e6e72f9d120153ec327ae878577df --- /dev/null +++ b/images/Shaft_01421.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47537a88a44c56fbf0e99d45b2b8e7d2fe39fcf78d8b9667281f5cd09d02bde4 +size 67862 diff --git a/images/Shaft_01422.png b/images/Shaft_01422.png new file mode 100644 index 0000000000000000000000000000000000000000..962cc9b510e463b7b55a9cc0909cd6a7b8c6d9ee --- /dev/null +++ b/images/Shaft_01422.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9c05919c9fadddd5bfbc10f6f2bed585af7d5a985adaddbe148d232a8b110be +size 82704 diff --git a/images/Shaft_01423.png b/images/Shaft_01423.png new file mode 100644 index 0000000000000000000000000000000000000000..a580a48f5df78fe2b4e77b1a69f693465aad67e3 --- /dev/null +++ b/images/Shaft_01423.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e5ab3a1e345348984662a8127e1629a89eae5322e0dba49a9fbcb451029a6c9 +size 94107 diff --git a/images/Shaft_01424.png b/images/Shaft_01424.png new file mode 100644 index 0000000000000000000000000000000000000000..727826025cff272949bcdff426bbb803955e7d32 --- /dev/null +++ b/images/Shaft_01424.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15dd38a2dc7a104a0ae290bb0f7382584fa620ea5dbeca3dd344b8a0c1b97331 +size 90082 diff --git a/images/Shaft_01425.png b/images/Shaft_01425.png new file mode 100644 index 0000000000000000000000000000000000000000..f75245fb5aab5bd3c1cbe7009887b9039bd93ec7 --- /dev/null +++ b/images/Shaft_01425.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba1604da80a833f41d09696dcde2477b575bc932664ee672ee1a612773cf1553 +size 89408 diff --git a/images/Shaft_01426.png b/images/Shaft_01426.png new file mode 100644 index 0000000000000000000000000000000000000000..13777556e652378ce1ec9f83ff15af3e4bf16e31 --- /dev/null +++ b/images/Shaft_01426.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21704e8c36be5a79fc21a05e1e98ccb669da66745821e2a8261d2f38cb89503d +size 89549 diff --git a/images/Shaft_01427.png b/images/Shaft_01427.png new file mode 100644 index 0000000000000000000000000000000000000000..067c15a3e337f221cefe65fa06ac57c285e7656c --- /dev/null +++ b/images/Shaft_01427.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d461e3f79e73898bc8158c129099308826ce7752c202e1c8e437dbc9478b2a2 +size 93991 diff --git a/images/Shaft_01428.png b/images/Shaft_01428.png new file mode 100644 index 0000000000000000000000000000000000000000..1071763b50d92704311a302d9870f962b808b8c2 --- /dev/null +++ b/images/Shaft_01428.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac38cbf3f911dfb140fb44ccfd354919260c763bcffa9834b1e955de40beaa59 +size 102691 diff --git a/images/Shaft_01429.png b/images/Shaft_01429.png new file mode 100644 index 0000000000000000000000000000000000000000..af76d3e9fc903759115e42ad81a0850f908aa466 --- /dev/null +++ b/images/Shaft_01429.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af4795df7bb174b31f131115d3dd3496d0ddd870850f8df4477bf063eccb3a3e +size 85092 diff --git a/images/Shaft_01430.png b/images/Shaft_01430.png new file mode 100644 index 0000000000000000000000000000000000000000..7b496eeae8b21a658fe3c89e06572835fddd14f2 --- /dev/null +++ b/images/Shaft_01430.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5190ef32929a1475ffcacce3afdf132d8bdb9128b53978bc1692305778720e57 +size 67026 diff --git a/images/Shaft_01431.png b/images/Shaft_01431.png new file mode 100644 index 0000000000000000000000000000000000000000..7189487a26b5582ac49f57dddb8864cd3f40d4d1 --- /dev/null +++ b/images/Shaft_01431.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38364c8d9cc89be4b26968f26a0ca934f3167f2899162a3b2030069d863f09de +size 89232 diff --git a/images/Shaft_01432.png b/images/Shaft_01432.png new file mode 100644 index 0000000000000000000000000000000000000000..1ae20d5ca314937943ad53da54019f78133bc63c --- /dev/null +++ b/images/Shaft_01432.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07e27272a7bbd0a082636464aad11e1e40337ddf03bf359a12b7b2ff56b9781c +size 81509 diff --git a/images/Shaft_01433.png b/images/Shaft_01433.png new file mode 100644 index 0000000000000000000000000000000000000000..bc01c4a7bf7d385716102a94759fbcc40cfc0ad4 --- /dev/null +++ b/images/Shaft_01433.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:558fe8c6e57d6026a61d4e468812c36ef52dcd4c0649b396b62ee8aa06f6552f +size 71921 diff --git a/images/Shaft_01434.png b/images/Shaft_01434.png new file mode 100644 index 0000000000000000000000000000000000000000..32bddbb72213d634104ee7b361c6f59e2b5ee853 --- /dev/null +++ b/images/Shaft_01434.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90e51162119a29ac74cdcdbda247b213d97913fa5de7d7c584aa71da45e0fa62 +size 83958 diff --git a/images/Shaft_01435.png b/images/Shaft_01435.png new file mode 100644 index 0000000000000000000000000000000000000000..e68c15a1870efb8c03550470ac73c48a0284bb6f --- /dev/null +++ b/images/Shaft_01435.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7d7d17a5856203ef87c24d6245d6226e50bdc6815e9cb01f3646cf2005418b1 +size 89447 diff --git a/images/Shaft_01436.png b/images/Shaft_01436.png new file mode 100644 index 0000000000000000000000000000000000000000..ec165793bb205a395f083222614f4b6379c69069 --- /dev/null +++ b/images/Shaft_01436.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd2869e309a8a9a46af5489855a73699ff0eb605758e66223e67e37615497c3c +size 81092 diff --git a/images/Shaft_01437.png b/images/Shaft_01437.png new file mode 100644 index 0000000000000000000000000000000000000000..133adafb7a3e55623a088431905ffcd2009b260b --- /dev/null +++ b/images/Shaft_01437.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89763683a5edb0c4f91ac71c0beb0c3aa4067dff75f60cb687c0ddbaf719e298 +size 113208 diff --git a/images/Shaft_01438.png b/images/Shaft_01438.png new file mode 100644 index 0000000000000000000000000000000000000000..ca9e0315c43f8161c45d208bdc9b72a46d5b3606 --- /dev/null +++ b/images/Shaft_01438.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:422d62298cb93b862aa4670cd0c4e6568b8bf67c426923ca4ebc2beb8c3e4953 +size 89195 diff --git a/images/Shaft_01439.png b/images/Shaft_01439.png new file mode 100644 index 0000000000000000000000000000000000000000..640fd742ce56c80d8aa4d150dede8d9745dfe964 --- /dev/null +++ b/images/Shaft_01439.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c23b0cb4ecfaeb94aad997a38386304cdfd448f1863f83a01abe2285b2f956d1 +size 93337 diff --git a/images/Shaft_01440.png b/images/Shaft_01440.png new file mode 100644 index 0000000000000000000000000000000000000000..38fd62dcb324d4ac19826c593d89fa7752ecd8cc --- /dev/null +++ b/images/Shaft_01440.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e800f0deec261221b85ef266047a8dadd6e2d21ed5688dc01794f55b20f5ba6 +size 77589 diff --git a/images/Shaft_01441.png b/images/Shaft_01441.png new file mode 100644 index 0000000000000000000000000000000000000000..ba6bcc3f9a339af53c59fba27361aff852cffc9c --- /dev/null +++ b/images/Shaft_01441.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61d8af2339d143d103720d53193987f06ad268c541e2f394ac7046a2d73b17f3 +size 68337 diff --git a/images/Shaft_01442.png b/images/Shaft_01442.png new file mode 100644 index 0000000000000000000000000000000000000000..b902db8f3e5713f25076581ea67e47a4d04a73d8 --- /dev/null +++ b/images/Shaft_01442.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7eb8ed512c797151fa2f7d870c0be499f8d866f72b6a65a3e16eb1ab314973d +size 78849 diff --git a/images/Shaft_01443.png b/images/Shaft_01443.png new file mode 100644 index 0000000000000000000000000000000000000000..ddcd9f4491a3a7dc6ee39291e3fb0b448d25c2b0 --- /dev/null +++ b/images/Shaft_01443.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:075ca6c678d32671f228cba35083cdb4eb3a83466a9d057a36adfa1e9ab333c5 +size 90248 diff --git a/images/Shaft_01444.png b/images/Shaft_01444.png new file mode 100644 index 0000000000000000000000000000000000000000..c41faa0259bd2889f86df12ebc8656d04c3badf7 --- /dev/null +++ b/images/Shaft_01444.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1491a30507ec35487166b8c0bbfc19766693bc35c1c60b64a6ef585c7ea98237 +size 68390 diff --git a/images/Shaft_01445.png b/images/Shaft_01445.png new file mode 100644 index 0000000000000000000000000000000000000000..4e742b83b75ae59ee94344398dbbeff36106e71d --- /dev/null +++ b/images/Shaft_01445.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d28af791ab0256b0f30ffcd7a1f8e4c0c0ced08eac9ac8ee75d8736caa2f65b9 +size 87013 diff --git a/images/Shaft_01446.png b/images/Shaft_01446.png new file mode 100644 index 0000000000000000000000000000000000000000..ae7d3fc934b49ff83ee63f24f522808ce5e35a1b --- /dev/null +++ b/images/Shaft_01446.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8599514e99cbb13d2f56cdad50d0e1312d989c03437efc482ef45f3a5cb16e2a +size 104540 diff --git a/images/Shaft_01447.png b/images/Shaft_01447.png new file mode 100644 index 0000000000000000000000000000000000000000..3867cd75b0a7e5abdfb3de0179190f6992558e8d --- /dev/null +++ b/images/Shaft_01447.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:523c2ded87bc5602ae5c575c32082dd5b19e54a3fdfa043565969a4ddf6438b4 +size 75005 diff --git a/images/Shaft_01448.png b/images/Shaft_01448.png new file mode 100644 index 0000000000000000000000000000000000000000..b7924305811704f99290a9cffea27379b4908f73 --- /dev/null +++ b/images/Shaft_01448.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a15780b61d057e58f007254053938ab61527e9e8d290b5e062fdb92020886cbe +size 69393 diff --git a/images/Shaft_01449.png b/images/Shaft_01449.png new file mode 100644 index 0000000000000000000000000000000000000000..7adaa5311fb39504ac1e4da70819eaeb6b603959 --- /dev/null +++ b/images/Shaft_01449.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cf372ce1842c99d4167a2582cfc4e21fcdd4bc0a4e67d1ae00d7deb6fac9822 +size 84063 diff --git a/images/Shaft_01450.png b/images/Shaft_01450.png new file mode 100644 index 0000000000000000000000000000000000000000..0f3c6888c625021f56002df507066b989ce2ff1f --- /dev/null +++ b/images/Shaft_01450.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d100fa18c5cd77d9e545a6c41692948eaee39c0a2ca763938ee987689cbd7a8 +size 96653 diff --git a/images/Shaft_01451.png b/images/Shaft_01451.png new file mode 100644 index 0000000000000000000000000000000000000000..da20cc53d2ab317910c7535a58dbf0ee0e15a810 --- /dev/null +++ b/images/Shaft_01451.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b202758ff65f707d21b846b05dff9284343eb7d910b4ea7925fcd610c067783 +size 83592 diff --git a/images/Shaft_01452.png b/images/Shaft_01452.png new file mode 100644 index 0000000000000000000000000000000000000000..7e1b55dcd982ffd5a163714b317aa636fa099d40 --- /dev/null +++ b/images/Shaft_01452.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8322208b7df05570ff26bc7b7fad125a30a08b37961f52c42a1a85be97a574b +size 79171 diff --git a/images/Shaft_01453.png b/images/Shaft_01453.png new file mode 100644 index 0000000000000000000000000000000000000000..52716d7820f7ea01faa7de2a312846a2fb589a72 --- /dev/null +++ b/images/Shaft_01453.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ce3368fcc0f7bc48b00aa25759120135e194dd0903e9cdee636105f7614edfe +size 70187 diff --git a/images/Shaft_01454.png b/images/Shaft_01454.png new file mode 100644 index 0000000000000000000000000000000000000000..aec47512b47cb4a3a137cac05bf4e69cb7d10220 --- /dev/null +++ b/images/Shaft_01454.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21b8532febe2b984b089a4c4a225c2cb32d2823303feeff73f73448d1bd811e4 +size 101171 diff --git a/images/Shaft_01455.png b/images/Shaft_01455.png new file mode 100644 index 0000000000000000000000000000000000000000..6bdffa284fed38d3ae23cf448c7d7bd1e1d00e6a --- /dev/null +++ b/images/Shaft_01455.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b97ace482ecefafef9e4a99dcf3e40845d5d331e9ae191f383a9bf1743d43be +size 90792 diff --git a/images/Shaft_01456.png b/images/Shaft_01456.png new file mode 100644 index 0000000000000000000000000000000000000000..7f328df5c5d1dc3639f789a1bb7e36ad713a72d7 --- /dev/null +++ b/images/Shaft_01456.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4fe39526e9d32daeb22b67eb214c62f2e4afc909a10b5df4c012898678b3ace +size 82028 diff --git a/images/Shaft_01457.png b/images/Shaft_01457.png new file mode 100644 index 0000000000000000000000000000000000000000..b5aac5d492b5ec00d91e1b2dbd80c725142bf503 --- /dev/null +++ b/images/Shaft_01457.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3c72dd1b7e652f67b8b0e7282d37fba36909211ec9808178d8d3ba0503d432d +size 91656 diff --git a/images/Shaft_01458.png b/images/Shaft_01458.png new file mode 100644 index 0000000000000000000000000000000000000000..ac5c57e7243329021041364895d1c220355bc6de --- /dev/null +++ b/images/Shaft_01458.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a02f19078b476726d462e94e7f6a03c9bc1cc6f2aa0b7e06aca6b02f0b7ca81 +size 88717 diff --git a/images/Shaft_01459.png b/images/Shaft_01459.png new file mode 100644 index 0000000000000000000000000000000000000000..5767cd6087568f97f1ffdbffb672b9c8da1102b5 --- /dev/null +++ b/images/Shaft_01459.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d10485c96e4ea8698b4c0cfe54120294cc328cebb9254506665bce279d0244c7 +size 92078 diff --git a/images/Shaft_01460.png b/images/Shaft_01460.png new file mode 100644 index 0000000000000000000000000000000000000000..2a33456ef3aeb37c5eb8ad240d03b4a5b8c3df33 --- /dev/null +++ b/images/Shaft_01460.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7829b02539cc642624482b11587b66c41042062082106665e9d30fddadece68 +size 70345 diff --git a/images/Shaft_01461.png b/images/Shaft_01461.png new file mode 100644 index 0000000000000000000000000000000000000000..ea6d2fc38f29c86ac6c54e80c06dedb8d1e67b81 --- /dev/null +++ b/images/Shaft_01461.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ffd9e1b7ccacd1a646649dfd023f2df2ff5f0a9eb711785c58b8c72de35943b +size 79857 diff --git a/images/Shaft_01462.png b/images/Shaft_01462.png new file mode 100644 index 0000000000000000000000000000000000000000..a3d3dc3a14e30004cd7fcb5376f56f9ab27f31c1 --- /dev/null +++ b/images/Shaft_01462.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:246123e12e91456d2dd7b4a6e3c726bfe47a5965013b60928b6aa3f6fa1fbe3a +size 70626 diff --git a/images/Shaft_01463.png b/images/Shaft_01463.png new file mode 100644 index 0000000000000000000000000000000000000000..c7e5b355a1597b46844b81d0b99fa1cc34bf55bb --- /dev/null +++ b/images/Shaft_01463.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f039e5527f48c4f8c960dccc0e84dffb72f21a043de6df6def0ff14aeda2e4b1 +size 83526 diff --git a/images/Shaft_01464.png b/images/Shaft_01464.png new file mode 100644 index 0000000000000000000000000000000000000000..99ffdf74661ef576f60870b47b7b93c76cf046be --- /dev/null +++ b/images/Shaft_01464.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa70b64fc160dddfa237ae7e7c0d1e2f4d533ac8cb03ddee1272dfb8e02bbbec +size 105294 diff --git a/images/Shaft_01465.png b/images/Shaft_01465.png new file mode 100644 index 0000000000000000000000000000000000000000..20553d3db6c454fe5e747e5e9d1333cd9cd8b292 --- /dev/null +++ b/images/Shaft_01465.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2c7972fd6071e1e13f5959032c68d496388e873700c060111eb882e2d4043ce +size 78255 diff --git a/images/Shaft_01466.png b/images/Shaft_01466.png new file mode 100644 index 0000000000000000000000000000000000000000..93b1c5ba48e232295967da993187092e394dc5f1 --- /dev/null +++ b/images/Shaft_01466.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1719a01b021affdfbd631945fac1074f808dcff6d63bdefe1fcc0bd6953be883 +size 87123 diff --git a/images/Shaft_01467.png b/images/Shaft_01467.png new file mode 100644 index 0000000000000000000000000000000000000000..2c3a8bb163900bde72a6d04d4e16ab3770acc7a3 --- /dev/null +++ b/images/Shaft_01467.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26ebd7411a162f00d69035472cbc1664b1ba9b6fbe2d085710e623d38510bb7a +size 70948 diff --git a/images/Shaft_01468.png b/images/Shaft_01468.png new file mode 100644 index 0000000000000000000000000000000000000000..75dc106b4001ad4f534a75e33f4a22ac28da04ad --- /dev/null +++ b/images/Shaft_01468.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc92931f7fb86972bce9bf8870943090117fcf02a71a3d42c3c0bc1389a5ba92 +size 72519 diff --git a/images/Shaft_01469.png b/images/Shaft_01469.png new file mode 100644 index 0000000000000000000000000000000000000000..29fdb993313436ebee92a94db8020883f42549df --- /dev/null +++ b/images/Shaft_01469.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ce5b397ce3a833d04eb78f6468f67817ab70c1a44e7b46824ac559cdeb5fad8 +size 87016 diff --git a/images/Shaft_01470.png b/images/Shaft_01470.png new file mode 100644 index 0000000000000000000000000000000000000000..64a3b5b74a21251863504cf4f086e145b6d7e617 --- /dev/null +++ b/images/Shaft_01470.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f79b5831e80a208f776d4397893a4d455c1e9b30eef5c4ee988225fe0caf415e +size 96260 diff --git a/images/Shaft_01471.png b/images/Shaft_01471.png new file mode 100644 index 0000000000000000000000000000000000000000..deac297b1a642f35c03beabc97938993f94438d8 --- /dev/null +++ b/images/Shaft_01471.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44590a384e139c437c52f2e60c5e3a924590856dac57d0cd77e3692b5c3d21a2 +size 70468 diff --git a/images/Shaft_01472.png b/images/Shaft_01472.png new file mode 100644 index 0000000000000000000000000000000000000000..70f7c3b7c77eabec09d029ab7c452b2c7c987d1c --- /dev/null +++ b/images/Shaft_01472.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1655dcd683d7c53d9caa213558b545df8f40f159f46e7da772fd5a073c38f12 +size 90837 diff --git a/images/Shaft_01473.png b/images/Shaft_01473.png new file mode 100644 index 0000000000000000000000000000000000000000..23bd37c6ec9d0965cb762c3ec24967ec1acadff2 --- /dev/null +++ b/images/Shaft_01473.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65ed0f33e16102c9bbaf1b2e788270617ac788edf89cd7b26896def6f1454e12 +size 73573 diff --git a/images/Shaft_01474.png b/images/Shaft_01474.png new file mode 100644 index 0000000000000000000000000000000000000000..c944c64cf13d5a5b9f93b397294d6681e3cac7b6 --- /dev/null +++ b/images/Shaft_01474.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b6713f928078ad1c3ed6310bdf111d5d2cc0f62b867485b3f03c76e23e446af +size 92847 diff --git a/images/Shaft_01475.png b/images/Shaft_01475.png new file mode 100644 index 0000000000000000000000000000000000000000..8b951012b81295de89ad610a7b0c2c115bc87ae3 --- /dev/null +++ b/images/Shaft_01475.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc18f627da009d2f67d1719e0dbd487f5d3b6eba2c7399db62f21f7b541dc9b5 +size 72343 diff --git a/images/Shaft_01476.png b/images/Shaft_01476.png new file mode 100644 index 0000000000000000000000000000000000000000..9003d125a2d140046273d245cea4b8cc30ddc8f3 --- /dev/null +++ b/images/Shaft_01476.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2869e7a130f734677883696d715c0f8a8d301be5389670ad2e1caba9711dc05c +size 82908 diff --git a/images/Shaft_01477.png b/images/Shaft_01477.png new file mode 100644 index 0000000000000000000000000000000000000000..1719317b60705797079ecb14b69011b82f3585c6 --- /dev/null +++ b/images/Shaft_01477.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cad3bdd43a837a948d44a8577823f7252ca41bc8a9c8bbeef9b2a10e4fa3870 +size 74215 diff --git a/images/Shaft_01478.png b/images/Shaft_01478.png new file mode 100644 index 0000000000000000000000000000000000000000..3276482521bb758a6b022c8a38c76e450a1041dc --- /dev/null +++ b/images/Shaft_01478.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ebfeb8c10bfb8d130e8a02f0ffb30afdb7f77a5ff65b1d990ca4d6bc47e7c26 +size 81418 diff --git a/images/Shaft_01479.png b/images/Shaft_01479.png new file mode 100644 index 0000000000000000000000000000000000000000..16c77f723984acf34145fbce55146afa94fd57a4 --- /dev/null +++ b/images/Shaft_01479.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:421298c6fbb34e590bf6d2d40baabcca66719dd0140202ab93a200313a5f6361 +size 92615 diff --git a/images/Shaft_01480.png b/images/Shaft_01480.png new file mode 100644 index 0000000000000000000000000000000000000000..1e2d50cd46e6b3dc19187f8387cc80b677691650 --- /dev/null +++ b/images/Shaft_01480.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9358c58a5ce9f98e258ecaa8ef20b78a3d08a30507daa884a260b7663ed6ce2 +size 94323 diff --git a/images/Shaft_01481.png b/images/Shaft_01481.png new file mode 100644 index 0000000000000000000000000000000000000000..cb485ed629fe752b62d13e42d2a8595815678b02 --- /dev/null +++ b/images/Shaft_01481.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cc3a43e3f5eaa7d94a26afc044e0269aac30cc4925e59c24bf907c899f81609 +size 80699 diff --git a/images/Shaft_01482.png b/images/Shaft_01482.png new file mode 100644 index 0000000000000000000000000000000000000000..4c6f07202ee53225d07eaff66782fbbdd89e40c7 --- /dev/null +++ b/images/Shaft_01482.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f3c5c4bc1066678dd1517dbdba0da1a8031884f4d8eef1e24aa8b966c5fd39d +size 89600 diff --git a/images/Shaft_01483.png b/images/Shaft_01483.png new file mode 100644 index 0000000000000000000000000000000000000000..365ce43bf312e41fcc135ddc2b69e8fba4aa668f --- /dev/null +++ b/images/Shaft_01483.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:750cb02fa39fa4c2a7e2c4d0dbd3f43064a77b98aae4e3497988b8ccc70c58ba +size 79397 diff --git a/images/Shaft_01484.png b/images/Shaft_01484.png new file mode 100644 index 0000000000000000000000000000000000000000..4b88625e4eb46febd966ddf53a69a86a6efbf9c1 --- /dev/null +++ b/images/Shaft_01484.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16e3f716e9b3e89e2df09a6323232edf265646319f4be47753bb62789099898f +size 84019 diff --git a/images/Shaft_01485.png b/images/Shaft_01485.png new file mode 100644 index 0000000000000000000000000000000000000000..93ccd576184bed6c9d5750c4e7874ca241eaf9db --- /dev/null +++ b/images/Shaft_01485.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9c28a766959365c25edb8513cd8ad30effa435349a56cbab2ac25aea0089213 +size 82434 diff --git a/images/Shaft_01486.png b/images/Shaft_01486.png new file mode 100644 index 0000000000000000000000000000000000000000..4a5f97423f0522b82b8d219251e8da9b0ed12f62 --- /dev/null +++ b/images/Shaft_01486.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3794ce389543db3109d4bbe488e30f3edd19769aa679eb9cead624cff4dcf324 +size 107203 diff --git a/images/Shaft_01487.png b/images/Shaft_01487.png new file mode 100644 index 0000000000000000000000000000000000000000..74d27507797f91b06907121a67c417494b0ed866 --- /dev/null +++ b/images/Shaft_01487.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbde51398c26d8539318b3d43b9d79c4d0e760b342c870be8fd5241770121d13 +size 77431 diff --git a/images/Shaft_01488.png b/images/Shaft_01488.png new file mode 100644 index 0000000000000000000000000000000000000000..6de0c18bdb4f29e7d3431269cffa5df74b402e90 --- /dev/null +++ b/images/Shaft_01488.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db300713e8ea71a77535041ea09cc5d4809049f52195b1032d3d370b819bce01 +size 88276 diff --git a/images/Shaft_01489.png b/images/Shaft_01489.png new file mode 100644 index 0000000000000000000000000000000000000000..2759e380ebd5110bf9362990778befcb1ea2ca39 --- /dev/null +++ b/images/Shaft_01489.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf383d1b2b61d0c825b08b56251b0b28cc333314922781688f4a9d7497c19152 +size 71374 diff --git a/images/Shaft_01490.png b/images/Shaft_01490.png new file mode 100644 index 0000000000000000000000000000000000000000..5071f2a091d604a932570c75885ce8381c4fbe39 --- /dev/null +++ b/images/Shaft_01490.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cf5f1b392dab81e499882d14ac1f9c0d0395394c2c842cefde00be10ff5cfc7 +size 118231 diff --git a/images/Shaft_01491.png b/images/Shaft_01491.png new file mode 100644 index 0000000000000000000000000000000000000000..59c42c8ff309164213054e5e66d0a186593e66fb --- /dev/null +++ b/images/Shaft_01491.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c896134dd13c2ff0dd9335634bc61a85f17d264f18ced499b72ad6da1cf7a53 +size 104345 diff --git a/images/Shaft_01492.png b/images/Shaft_01492.png new file mode 100644 index 0000000000000000000000000000000000000000..318f32626d6965ad9a11622dae22ca1fad797cae --- /dev/null +++ b/images/Shaft_01492.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:090771d671c699bdbe85f880399ec79b56dcd7eb9edf874f227ec1a30caba145 +size 84252 diff --git a/images/Shaft_01493.png b/images/Shaft_01493.png new file mode 100644 index 0000000000000000000000000000000000000000..fdd30f06ad759f3ceeea164bd469354224377949 --- /dev/null +++ b/images/Shaft_01493.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e401defe321dde578def873c69516dd651961babfa004b1775324246306f5d78 +size 84160 diff --git a/images/Shaft_01494.png b/images/Shaft_01494.png new file mode 100644 index 0000000000000000000000000000000000000000..000c00bf505721dc196c4fece8c091373f400386 --- /dev/null +++ b/images/Shaft_01494.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4482edb82eaeaaaf8ca9e93a6c434d449d28ebab635e29e35ce714772c1c9cb +size 72150 diff --git a/images/Shaft_01495.png b/images/Shaft_01495.png new file mode 100644 index 0000000000000000000000000000000000000000..a37b55ddce92de62de9a320d21dddabd06839623 --- /dev/null +++ b/images/Shaft_01495.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfc6fc0b3d503d60ecd36a96aba757da868e7fe46ec32e213238472539ddf4a3 +size 103395 diff --git a/images/Shaft_01496.png b/images/Shaft_01496.png new file mode 100644 index 0000000000000000000000000000000000000000..5c0bbd4d993c556a27687c7a0c74c723da9cd2d0 --- /dev/null +++ b/images/Shaft_01496.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaa6dc4743ff67651f479fe7eec11a6d094f083fe23d435668b15ed9c9c69c26 +size 91335 diff --git a/images/Shaft_01497.png b/images/Shaft_01497.png new file mode 100644 index 0000000000000000000000000000000000000000..bf68d9e2d70c42155c9c89c2c8bd5d166346d7c4 --- /dev/null +++ b/images/Shaft_01497.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3e3f80d2064800c2199cc8ffb7d1bfcae47996e2319da5c56d9660c823419bd +size 86624 diff --git a/images/Shaft_01498.png b/images/Shaft_01498.png new file mode 100644 index 0000000000000000000000000000000000000000..f54259aa56fc4c05471ace16d8432913b3680b0c --- /dev/null +++ b/images/Shaft_01498.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6613a785310a069e2a43c0d37f917b1e01ed26cd5f7606da5eacb962f43ba83e +size 97507 diff --git a/images/Shaft_01499.png b/images/Shaft_01499.png new file mode 100644 index 0000000000000000000000000000000000000000..1badef4bfdbfc22fdf26b0580071b258109087e9 --- /dev/null +++ b/images/Shaft_01499.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef42f29e404b5970323fb165a4d4fdf086a962a3da77d5ea7f4dc02c068fe5ee +size 76093 diff --git a/images/Shaft_01500.png b/images/Shaft_01500.png new file mode 100644 index 0000000000000000000000000000000000000000..d6fc9d633b6e72868311b95f2edbcc7f3dcd975b --- /dev/null +++ b/images/Shaft_01500.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7643eae0a63357e055ea0c891d810497451a8f187e419532cc16721f5fdc8a9 +size 106424 diff --git a/images/Shaft_01501.png b/images/Shaft_01501.png new file mode 100644 index 0000000000000000000000000000000000000000..2f1d60dcc7d7ce898710710b0e588892ac817ea6 --- /dev/null +++ b/images/Shaft_01501.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d0e15ff6eee0085ce2967083b18298a600f1994ba20b4f4eb8f1bf0a715eee7 +size 83667 diff --git a/images/Shaft_01502.png b/images/Shaft_01502.png new file mode 100644 index 0000000000000000000000000000000000000000..4fffefb3d7564b4972b902e4a6c47697834e7799 --- /dev/null +++ b/images/Shaft_01502.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ae07d0ff04059984f534e541813db2b7a02e8e3daab49122d85c7d68632e78f +size 110364 diff --git a/images/Shaft_01503.png b/images/Shaft_01503.png new file mode 100644 index 0000000000000000000000000000000000000000..93abba5cf8f4c19bee4ff3ac54a3a3a428332eb6 --- /dev/null +++ b/images/Shaft_01503.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35526932c75ffe3938bdca65a84627373810dae09dabd2e90928bc857940478e +size 96302 diff --git a/images/Shaft_01504.png b/images/Shaft_01504.png new file mode 100644 index 0000000000000000000000000000000000000000..ee4c0301a72989a8b157cb40e11816bffa515219 --- /dev/null +++ b/images/Shaft_01504.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d04c61a7d718c00c1152c7340e4fb1172146173b79f64e6f36870919759166a4 +size 79855 diff --git a/images/Shaft_01505.png b/images/Shaft_01505.png new file mode 100644 index 0000000000000000000000000000000000000000..6bfbf12d38edd40992325a0e781d9f1d7d8f6ae5 --- /dev/null +++ b/images/Shaft_01505.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c25b828f7a0001d4829aec2b8aa07ee374063dcc9f4537d690f4641c770912dc +size 82375 diff --git a/images/Shaft_01506.png b/images/Shaft_01506.png new file mode 100644 index 0000000000000000000000000000000000000000..9901a4a6bc3dee199c4b3ee1746f2b82a352ac0f --- /dev/null +++ b/images/Shaft_01506.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a55c2378cffd6860d7b117f448cb369c331337f5bfb267f308afaf944ff06b41 +size 98326 diff --git a/images/Shaft_01507.png b/images/Shaft_01507.png new file mode 100644 index 0000000000000000000000000000000000000000..62870510366d6e17c4a1b5409325a86e59ebb0e7 --- /dev/null +++ b/images/Shaft_01507.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4155074ff79886610f91ed7a130b1768e11dd83bdf0849fd777f28f325026538 +size 68933 diff --git a/images/Shaft_01508.png b/images/Shaft_01508.png new file mode 100644 index 0000000000000000000000000000000000000000..85361fb292b271e30d056bc202279b93068ead3a --- /dev/null +++ b/images/Shaft_01508.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9b023213c29b648a0e115877b8829ddd8066de74e28b9c54fbdcdc1a1239a60 +size 79157 diff --git a/images/Shaft_01509.png b/images/Shaft_01509.png new file mode 100644 index 0000000000000000000000000000000000000000..2f65a2f8fb6957826b4a3d22e5705c3f2ef23188 --- /dev/null +++ b/images/Shaft_01509.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb92ccf7bb0e09e0ab73c91a8a5d753380ed19c35471b9aeb4b09af62662e635 +size 70426 diff --git a/images/Shaft_01510.png b/images/Shaft_01510.png new file mode 100644 index 0000000000000000000000000000000000000000..0c795dbf12a230bbe1c02d13987b0a9a632b7498 --- /dev/null +++ b/images/Shaft_01510.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4be9029ebe76fa29f6906209adf2964006ce99560b11d4119b1c94245e52cc2a +size 97756 diff --git a/images/Shaft_01511.png b/images/Shaft_01511.png new file mode 100644 index 0000000000000000000000000000000000000000..165ab481426cb918cbdb4092a171ef0c5b4f2e56 --- /dev/null +++ b/images/Shaft_01511.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f318cce6d0b5776a534a271b7486e32662bdd1f3a133ce5ba6900c6ebc685a84 +size 82169 diff --git a/images/Shaft_01512.png b/images/Shaft_01512.png new file mode 100644 index 0000000000000000000000000000000000000000..20be4ed52fa4c47c67dac76bb5d6c3022efd349e --- /dev/null +++ b/images/Shaft_01512.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:664475aed2b324760a3a1256ca2f5b4bf1a6ccc382e99407f5c83e082a2dbba7 +size 83060 diff --git a/images/Shaft_01513.png b/images/Shaft_01513.png new file mode 100644 index 0000000000000000000000000000000000000000..2af2f7c7ba30852dc27663e6f916cfa825175ed7 --- /dev/null +++ b/images/Shaft_01513.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1028c44d844d5a11d678ca68b5d5cd97ce67908645cd644298906f668ad0f239 +size 83839 diff --git a/images/Shaft_01514.png b/images/Shaft_01514.png new file mode 100644 index 0000000000000000000000000000000000000000..17182a9ae0a9d176f618bf26538c92358ba096d3 --- /dev/null +++ b/images/Shaft_01514.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2aa52303756c7e223eb8df4e3521776b88666424662c106aa7aa28067c4748d +size 107232 diff --git a/images/Shaft_01515.png b/images/Shaft_01515.png new file mode 100644 index 0000000000000000000000000000000000000000..9d90ca51e391f373b2515a1808e122110bdfe86b --- /dev/null +++ b/images/Shaft_01515.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b0bb9aa2d2051b2b45c5f6e33b8394af7cb1f5e6af751053453df62301a5130 +size 87461 diff --git a/images/Shaft_01516.png b/images/Shaft_01516.png new file mode 100644 index 0000000000000000000000000000000000000000..04091eb081bd00d2931405fd2fbd98775ed2ef61 --- /dev/null +++ b/images/Shaft_01516.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6563693a7badff7c9e9a604c6e69dcfa3daf9207dc2afc7f36b21d43134f4497 +size 105953 diff --git a/images/Shaft_01517.png b/images/Shaft_01517.png new file mode 100644 index 0000000000000000000000000000000000000000..5cb6c3124690c00b195a92810340b77a7afe863c --- /dev/null +++ b/images/Shaft_01517.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1624175bf225bb56f7668265f93a227cc97205d884e5fe684242dada8b19665 +size 87806 diff --git a/images/Shaft_01518.png b/images/Shaft_01518.png new file mode 100644 index 0000000000000000000000000000000000000000..a1f2ab96a7f982f1ed3d983806907639f23fc631 --- /dev/null +++ b/images/Shaft_01518.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78b81c39181190611a7934a424a03acb96ce1da21925f3a71af56730ba705848 +size 88998 diff --git a/images/Shaft_01519.png b/images/Shaft_01519.png new file mode 100644 index 0000000000000000000000000000000000000000..232fcd8ef11f0549868d691f8d72336ea53b0360 --- /dev/null +++ b/images/Shaft_01519.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:457477d513ca8ee60584a42ae7150de97d072feeef5ad7ace8f5d986b24dc127 +size 66661 diff --git a/images/Shaft_01520.png b/images/Shaft_01520.png new file mode 100644 index 0000000000000000000000000000000000000000..33beed197197b356928fbf128ba1bad5be324257 --- /dev/null +++ b/images/Shaft_01520.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c30ce4be2c5a6921d443a0d8700642c873351409c7113bc8ac195ca133711503 +size 95197 diff --git a/images/Shaft_01521.png b/images/Shaft_01521.png new file mode 100644 index 0000000000000000000000000000000000000000..3705fa524dd072bdcdae5cadaba34a7903055dbf --- /dev/null +++ b/images/Shaft_01521.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae9b4640fab049824289b2f9b9540d79bf7f82c9ae83a7a6ec45e47896f7e9a0 +size 78280 diff --git a/images/Shaft_01522.png b/images/Shaft_01522.png new file mode 100644 index 0000000000000000000000000000000000000000..d057f92050e435b6425a8508b129a4b7a8bf5e18 --- /dev/null +++ b/images/Shaft_01522.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39d1a7a455bf4096cbd6f3d6e6f83959efc930667eee6b6176468c24eba7aba0 +size 102794 diff --git a/images/Shaft_01523.png b/images/Shaft_01523.png new file mode 100644 index 0000000000000000000000000000000000000000..7d3a29af1bcef696f61a86d05b717268dd5d3aa3 --- /dev/null +++ b/images/Shaft_01523.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc9785c1fd17d4f4e69fb20efce1efee92037fa5724cc55ab520fe66bb9b333d +size 72771 diff --git a/images/Shaft_01524.png b/images/Shaft_01524.png new file mode 100644 index 0000000000000000000000000000000000000000..bd7fb8e0ac3036cd2430d59e7cfa5d09caaa090b --- /dev/null +++ b/images/Shaft_01524.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a98307364f6033a56e6669542ddc4386dec87036b72c9c68ee603054f8d75a02 +size 71809 diff --git a/images/Shaft_01525.png b/images/Shaft_01525.png new file mode 100644 index 0000000000000000000000000000000000000000..b33b6116d622a22995e91120121d11a6bc4d3c71 --- /dev/null +++ b/images/Shaft_01525.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79a1f1306f71208bd9d38ed539b19b845b97437d470e4525bbdeea0b1847a6ad +size 92056 diff --git a/images/Shaft_01526.png b/images/Shaft_01526.png new file mode 100644 index 0000000000000000000000000000000000000000..886a808f6cacd94e8aecf10bdc2b82ddb924ff0f --- /dev/null +++ b/images/Shaft_01526.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecc087d2a8169ec10cf9d068a76ac19b34b4e02d85d4820cd364a6b0d9227a17 +size 91397 diff --git a/images/Shaft_01527.png b/images/Shaft_01527.png new file mode 100644 index 0000000000000000000000000000000000000000..9ed9a8197c7331163752decfd07015a963e92db7 --- /dev/null +++ b/images/Shaft_01527.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:234d234274e2480f143cd7b8709ef116ae387889efec82c82826654674a15276 +size 74113 diff --git a/images/Shaft_01528.png b/images/Shaft_01528.png new file mode 100644 index 0000000000000000000000000000000000000000..f874f9962aee095c411aa2f7d7b39c2f3d85c882 --- /dev/null +++ b/images/Shaft_01528.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2eeb09b8c18a5996f666f9209577c4e2e653aa1db689bc85a9d431fc2976002e +size 73108 diff --git a/images/Shaft_01529.png b/images/Shaft_01529.png new file mode 100644 index 0000000000000000000000000000000000000000..b0c8fa347b3f25cf69fda4db0467fa0c2def5536 --- /dev/null +++ b/images/Shaft_01529.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0115be85a889cde93efb52045443d37149e46029de616843026f0caef3db7f95 +size 90336 diff --git a/images/Shaft_01530.png b/images/Shaft_01530.png new file mode 100644 index 0000000000000000000000000000000000000000..4eb3ec230461baf505ccc53c5701e3a58b61cde8 --- /dev/null +++ b/images/Shaft_01530.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:462403854b2176d4de69a68d4fdcce0517ddd2ca374197620e22d58dbab4ef53 +size 87289 diff --git a/images/Shaft_01531.png b/images/Shaft_01531.png new file mode 100644 index 0000000000000000000000000000000000000000..692064a79612a0bae8c17c3f5faaecf2da2b65d7 --- /dev/null +++ b/images/Shaft_01531.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf1f71b746fc2591a33b72f0c5012b488c48e49bd0f47df7f5fd9c86beef15ca +size 72612 diff --git a/images/Shaft_01532.png b/images/Shaft_01532.png new file mode 100644 index 0000000000000000000000000000000000000000..b4e15348a807b3edfabfa35187d6ebcbe4ecbf69 --- /dev/null +++ b/images/Shaft_01532.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:368b06bbc372acc99c69bdb7c1835217875ed3ec3c1b59784b0cc6b872b496ef +size 80359 diff --git a/images/Shaft_01533.png b/images/Shaft_01533.png new file mode 100644 index 0000000000000000000000000000000000000000..6cdc8d26c53055b66cf9d52b9645e777f597ff0a --- /dev/null +++ b/images/Shaft_01533.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70eb3b69487f58078de8cc977d7863fcd0ba788f98d209cb8f7b4dca678215cc +size 74896 diff --git a/images/Shaft_01534.png b/images/Shaft_01534.png new file mode 100644 index 0000000000000000000000000000000000000000..cc16cdb58d25fcbf86182f42a5b9f912fd18b84a --- /dev/null +++ b/images/Shaft_01534.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8e0eb0a7a11b8fc1447003b58675ceb2e6bc3cc27205e143ff1c71a53859d26 +size 75179 diff --git a/images/Shaft_01535.png b/images/Shaft_01535.png new file mode 100644 index 0000000000000000000000000000000000000000..0a6a7540fcaf0e5d27bf9585e300db600d7c56e3 --- /dev/null +++ b/images/Shaft_01535.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a358de7d1b47d3b12032b047f602c5b5e94b6218cb54f59400ed4af58b160a0d +size 73503 diff --git a/images/Shaft_01536.png b/images/Shaft_01536.png new file mode 100644 index 0000000000000000000000000000000000000000..cf087e55d412e043bf8e5cf2c3b58514a54b7b7c --- /dev/null +++ b/images/Shaft_01536.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bb0caa504fa9cccafb95cc7db482ac51ccf49aa756e8897cb1843a33efe7881 +size 92106 diff --git a/images/Shaft_01537.png b/images/Shaft_01537.png new file mode 100644 index 0000000000000000000000000000000000000000..7213051a78e6808a366536f40f443d95f9652e08 --- /dev/null +++ b/images/Shaft_01537.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea2bf6542650e036a44e13602c76fd939befb407f375460cf0361b791f7c71e4 +size 83553 diff --git a/images/Shaft_01538.png b/images/Shaft_01538.png new file mode 100644 index 0000000000000000000000000000000000000000..c8e374b8aba5468e09adc929ca823e14bee5381b --- /dev/null +++ b/images/Shaft_01538.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5debe2a3e45979a5ea136903ca682885aee2895fefadd8ecf317c4a862836bd +size 98166 diff --git a/images/Shaft_01539.png b/images/Shaft_01539.png new file mode 100644 index 0000000000000000000000000000000000000000..698145ad0c6c8cc17c0ba929d11fe43f2dfe4417 --- /dev/null +++ b/images/Shaft_01539.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06178fe969fcdac9aa56b090c28ed85a24666bf67218814e5c80e25ef4c3a5c9 +size 97108 diff --git a/images/Shaft_01540.png b/images/Shaft_01540.png new file mode 100644 index 0000000000000000000000000000000000000000..f9eb5be78d23056bb0f71b2c3c9a1265c7fa04f6 --- /dev/null +++ b/images/Shaft_01540.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d160a990f8c4d9d0c98c00887a674e807f8ca7579d0b69124475660536a8b048 +size 92853 diff --git a/images/Shaft_01541.png b/images/Shaft_01541.png new file mode 100644 index 0000000000000000000000000000000000000000..ae08b89f1772141c944279db54808913969f5385 --- /dev/null +++ b/images/Shaft_01541.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:843c6c462f457dc8b3e8ff67c5794329cce95ec2f96771119f615832816b2513 +size 65348 diff --git a/images/Shaft_01542.png b/images/Shaft_01542.png new file mode 100644 index 0000000000000000000000000000000000000000..b82a8d302457ffb966c3cd2dc55aefc17a75b180 --- /dev/null +++ b/images/Shaft_01542.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9506a842b49603334b47a30c505c24be1dc3135763b23eb8570f4e48c023e487 +size 100623 diff --git a/images/Shaft_01543.png b/images/Shaft_01543.png new file mode 100644 index 0000000000000000000000000000000000000000..97da55a2599703e897bbe96438901c62ca880de8 --- /dev/null +++ b/images/Shaft_01543.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c46bb6173ea17ea21b572a228d3ae6dadad5948ed18bcd1f8e8d0c023b75fceb +size 106962 diff --git a/images/Shaft_01544.png b/images/Shaft_01544.png new file mode 100644 index 0000000000000000000000000000000000000000..6c42c99438502e323ea9cc5b81ddb58b8b3f3f32 --- /dev/null +++ b/images/Shaft_01544.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:042b53f92ccfea840d02f77b512ab166ab0b61f57910849f12e096f7e908d228 +size 88491 diff --git a/images/Shaft_01545.png b/images/Shaft_01545.png new file mode 100644 index 0000000000000000000000000000000000000000..68b29df211b6fb75fe824b71d8e7ab7765e89f09 --- /dev/null +++ b/images/Shaft_01545.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92b87b4501c7f23fd370fceb791c197000996b917a112c27d55f905eeea1b960 +size 90227 diff --git a/images/Shaft_01546.png b/images/Shaft_01546.png new file mode 100644 index 0000000000000000000000000000000000000000..c9190154fa5689e9dc16fc1b55cf1d73473841ec --- /dev/null +++ b/images/Shaft_01546.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0237bb02f138ba1faad1cfedaaee879f2cb0ee4353512fb80285301970c3f004 +size 103408 diff --git a/images/Shaft_01547.png b/images/Shaft_01547.png new file mode 100644 index 0000000000000000000000000000000000000000..e09b95f3ec28c845dd84b91e649c21d0d037d060 --- /dev/null +++ b/images/Shaft_01547.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f1fbd8b360aef1733deca0474754f07e123b8b7aff29bd5c4f595ec4caf9bd7 +size 102555 diff --git a/images/Shaft_01548.png b/images/Shaft_01548.png new file mode 100644 index 0000000000000000000000000000000000000000..f60d88e8e4de0741501305996cbf357552a56ee7 --- /dev/null +++ b/images/Shaft_01548.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b64a4bae160d65be91ee42f3adddf6140621605034ccc53dc2dfc470d18f7b94 +size 98321 diff --git a/images/Shaft_01549.png b/images/Shaft_01549.png new file mode 100644 index 0000000000000000000000000000000000000000..948a11031f26c63f9f85bef8783c6eaaa1c7704f --- /dev/null +++ b/images/Shaft_01549.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a2e9d3ff081a9bd26ae931988173ac5b15ffb66b19920e3d3b36de525de9b7f +size 74320 diff --git a/images/Shaft_01550.png b/images/Shaft_01550.png new file mode 100644 index 0000000000000000000000000000000000000000..f8bba881d55744fb2947bf0f5664e103fcf87525 --- /dev/null +++ b/images/Shaft_01550.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3df97b6ed14b4cad9ad9c840be695e53b356201f50c7b5d09040f152305cbd3f +size 80549 diff --git a/images/Shaft_01551.png b/images/Shaft_01551.png new file mode 100644 index 0000000000000000000000000000000000000000..81636bfdc887dfbfe5e38f144607b8bef2e73113 --- /dev/null +++ b/images/Shaft_01551.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3ed5adbb2cfecc5ac89a43f9f164b939e75df144bdc8b56206519a3bb4a986d +size 78066 diff --git a/images/Shaft_01552.png b/images/Shaft_01552.png new file mode 100644 index 0000000000000000000000000000000000000000..106938f8117336c421353e10467a818637f7b617 --- /dev/null +++ b/images/Shaft_01552.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8aac79b2334e23d1d7faaa055361323621d6b8c377d92804082e840227c47936 +size 98841 diff --git a/images/Shaft_01553.png b/images/Shaft_01553.png new file mode 100644 index 0000000000000000000000000000000000000000..88da7fc544d1a8c9c751ec4109851751acb4c142 --- /dev/null +++ b/images/Shaft_01553.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3663761c4ac668bac878d055b759fa670f5b5b777c47527a1081ecb257de8c86 +size 79361 diff --git a/images/Shaft_01554.png b/images/Shaft_01554.png new file mode 100644 index 0000000000000000000000000000000000000000..9b0b3d063493ef7ffdfd1c3c46b492b48d3693d3 --- /dev/null +++ b/images/Shaft_01554.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d91f9f2e38385ea1ba232cdea90dff69f0101267767d4ef10663f4bfa6aef210 +size 71150 diff --git a/images/Shaft_01555.png b/images/Shaft_01555.png new file mode 100644 index 0000000000000000000000000000000000000000..d73ca36bc1429d0b7de77cdd94429f0446e6b822 --- /dev/null +++ b/images/Shaft_01555.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac8d26f0e961bd63dc0225195275fb6a9e5cb9004773f9a625e4d69b8a6446a9 +size 67452 diff --git a/images/Shaft_01556.png b/images/Shaft_01556.png new file mode 100644 index 0000000000000000000000000000000000000000..702c50268b52eaafc6693c7ef694da42a0743726 --- /dev/null +++ b/images/Shaft_01556.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c2b8e01dfb7a84291bb53a9252bc57beb2f49a7763d919dd503ddbc56a1e0ae +size 108455 diff --git a/images/Shaft_01557.png b/images/Shaft_01557.png new file mode 100644 index 0000000000000000000000000000000000000000..cfb0846d874a4740ed8ade3310df0b83f029865b --- /dev/null +++ b/images/Shaft_01557.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e6a5e31da408dc0401a26831f2ead60b6cb8b4f7766a6f05726d7b03229c21d +size 85144 diff --git a/images/Shaft_01558.png b/images/Shaft_01558.png new file mode 100644 index 0000000000000000000000000000000000000000..f3c860707f2ddd7b7469b0c2a5724b8f975383bd --- /dev/null +++ b/images/Shaft_01558.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a2bde228396d63240dbeb55c57b907f3821b41452fab9e2cbf74daef3996667 +size 100414 diff --git a/images/Shaft_01559.png b/images/Shaft_01559.png new file mode 100644 index 0000000000000000000000000000000000000000..d63373a110ee97c743f8957b4a4df19d7739cebd --- /dev/null +++ b/images/Shaft_01559.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74806544b7531c132fbe174dcad8a928695ecd3d01dba3f7c4884863a61d983a +size 76136 diff --git a/images/Shaft_01560.png b/images/Shaft_01560.png new file mode 100644 index 0000000000000000000000000000000000000000..0798fd43aa014cdfd17e65116636f63a9f01f79c --- /dev/null +++ b/images/Shaft_01560.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41be9921692ac42e4a883b3daba12423d7eb070664a546834c706cf1ac55ac91 +size 84798 diff --git a/images/Shaft_01561.png b/images/Shaft_01561.png new file mode 100644 index 0000000000000000000000000000000000000000..56a621fcabc073bc5ba67f30b779258ed0559508 --- /dev/null +++ b/images/Shaft_01561.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf98e1ca84c0566b5f604ff258154caa67f43e61ebbc932fd9dbb923fa1e2d01 +size 77679 diff --git a/images/Shaft_01562.png b/images/Shaft_01562.png new file mode 100644 index 0000000000000000000000000000000000000000..aad837fb3af82723e77c7d6bc2ee44ac0ddbd9f9 --- /dev/null +++ b/images/Shaft_01562.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13a8bd79ad52f88e2d9e83a5ef6af9c23e5dba16f5eab7c40eb2e3378b1d11bd +size 95276 diff --git a/images/Shaft_01563.png b/images/Shaft_01563.png new file mode 100644 index 0000000000000000000000000000000000000000..a81db7e04ddc448a13feaafb6704cab124edbf07 --- /dev/null +++ b/images/Shaft_01563.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79465969e7b5909670af8fa03fcbcb6f5a998f4a8e4ff166dc8d77fcd5713ed6 +size 73556 diff --git a/images/Shaft_01564.png b/images/Shaft_01564.png new file mode 100644 index 0000000000000000000000000000000000000000..2c51fec48cbbd42aeee4d972a6c669ec7522cd26 --- /dev/null +++ b/images/Shaft_01564.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:180178aeda5cf708d27e2ce7764e12c9a5eef5135b2497391a6d4e7ca5f5d61c +size 105427 diff --git a/images/Shaft_01565.png b/images/Shaft_01565.png new file mode 100644 index 0000000000000000000000000000000000000000..af8460d40aaf6d14ab7b85fb297f03ef5930a2dc --- /dev/null +++ b/images/Shaft_01565.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad0719f9082027d8118239b458b7a0029bad9446bcfd900c5c2058359c7e939a +size 96186 diff --git a/images/Shaft_01566.png b/images/Shaft_01566.png new file mode 100644 index 0000000000000000000000000000000000000000..459cfe9f21ca406b48419b74c4b059c6f715d75f --- /dev/null +++ b/images/Shaft_01566.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d72ff88cf95b3a5625018ec0f7448d6ddc985efd15643977f3b183295adadbb4 +size 86921 diff --git a/images/Shaft_01567.png b/images/Shaft_01567.png new file mode 100644 index 0000000000000000000000000000000000000000..a72464eafb258b53a13ef3d62a1a76b008a4c56c --- /dev/null +++ b/images/Shaft_01567.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:709b969ee732dd9c996b4d2451aa4713996d084c3247794e2a00d614bd3af9be +size 81376 diff --git a/images/Shaft_01568.png b/images/Shaft_01568.png new file mode 100644 index 0000000000000000000000000000000000000000..aa53589d4aa2688f5e9141517c24b60163d1cdbf --- /dev/null +++ b/images/Shaft_01568.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7ee6ff1e23768f2708f2f381c9a16060fb44b771819d9816d03d2de30a0fa51 +size 95945 diff --git a/images/Shaft_01569.png b/images/Shaft_01569.png new file mode 100644 index 0000000000000000000000000000000000000000..e51dc80121f96a52f646e1e96354eb3854fe67c8 --- /dev/null +++ b/images/Shaft_01569.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d86039cb159f96a77415dc73434f2d7116757189c615b1df554fd25685d7973 +size 85312 diff --git a/images/Shaft_01570.png b/images/Shaft_01570.png new file mode 100644 index 0000000000000000000000000000000000000000..3f02019771dd21121d071d16c9e60f53454311ba --- /dev/null +++ b/images/Shaft_01570.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d9bfcab8582663666b30591b3b830b4765d43ea7bd59b1bcdf3f04d7bfcccf6 +size 88147 diff --git a/images/Shaft_01571.png b/images/Shaft_01571.png new file mode 100644 index 0000000000000000000000000000000000000000..15b001278298a2f679cc76b3cce4029f679c05a1 --- /dev/null +++ b/images/Shaft_01571.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3bfa358bc18772a8ee0fb2fef3b76b0638175b38bf47f23d7cddc8e8edf08ef +size 75181 diff --git a/images/Shaft_01572.png b/images/Shaft_01572.png new file mode 100644 index 0000000000000000000000000000000000000000..40222c9691c03d960b1d7820f542644c678c399b --- /dev/null +++ b/images/Shaft_01572.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6deccd8627b5dfbd4969c688fdf4d262da466f93b7a6947a08604ea4368e255 +size 90453 diff --git a/images/Shaft_01573.png b/images/Shaft_01573.png new file mode 100644 index 0000000000000000000000000000000000000000..fb7486faf9f6061898de5dc03058df667ae5bddf --- /dev/null +++ b/images/Shaft_01573.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7123a1291ec1adfc860b0c194d9be48c8dcf7afcca55930926fb6edf2f269f0e +size 100630 diff --git a/images/Shaft_01574.png b/images/Shaft_01574.png new file mode 100644 index 0000000000000000000000000000000000000000..99150cbbc7cda2217a486c76aed6578f58c2ce3a --- /dev/null +++ b/images/Shaft_01574.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3dc656904f960c9b90498a0f6ee626c0f5067bef26584256cae8ec9a15b47974 +size 91966 diff --git a/images/Shaft_01575.png b/images/Shaft_01575.png new file mode 100644 index 0000000000000000000000000000000000000000..ae73d32ec02338a22a3f56275c4ca2b17eb361a9 --- /dev/null +++ b/images/Shaft_01575.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76a2e6755f2f1173bba00f23ffbb6c3d315571ee2fccad29b05ac06a7e82bac2 +size 86493 diff --git a/images/Shaft_01576.png b/images/Shaft_01576.png new file mode 100644 index 0000000000000000000000000000000000000000..198d6ba140304d5ec24ef2842fcf8cc2bd084b1b --- /dev/null +++ b/images/Shaft_01576.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:766b1d06e3c9a45eb25da022b074148502abfd3bcc7a07046c93d1296627427a +size 80429 diff --git a/images/Shaft_01577.png b/images/Shaft_01577.png new file mode 100644 index 0000000000000000000000000000000000000000..88e0b0b183ea73831c4fd531ca007c8813d489fc --- /dev/null +++ b/images/Shaft_01577.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e5f88b8371964224c8515f01c49488bde1148bfef54ce298ed70183625c4eca +size 67374 diff --git a/images/Shaft_01578.png b/images/Shaft_01578.png new file mode 100644 index 0000000000000000000000000000000000000000..ac8f32eac0f1014aba3553d1d1bf5174c31fbcd0 --- /dev/null +++ b/images/Shaft_01578.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:355e9c1dca50177177bacb29742912d6271d06d7fa7f238146051ce4ccb87a84 +size 88124 diff --git a/images/Shaft_01579.png b/images/Shaft_01579.png new file mode 100644 index 0000000000000000000000000000000000000000..3be2d5caa88d986d0361a098f272c2d764199378 --- /dev/null +++ b/images/Shaft_01579.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca940b4bacdd4e28066a058e544e3215682ea4749732612b4a3cb658cd99f045 +size 91158 diff --git a/images/Shaft_01580.png b/images/Shaft_01580.png new file mode 100644 index 0000000000000000000000000000000000000000..f9983b8f2cea94364ecb3694f89adb7bbc97b2a2 --- /dev/null +++ b/images/Shaft_01580.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1847d203d580336da98e089e92631fd6e557c7514d645fcdab01dd2631fa848 +size 74809 diff --git a/images/Shaft_01581.png b/images/Shaft_01581.png new file mode 100644 index 0000000000000000000000000000000000000000..dbf44e3f5308d0d94cdaeee7ad0a5bec0a3c80b5 --- /dev/null +++ b/images/Shaft_01581.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a888dfeee131e40b8ed3c1095f3cc7c3fc7ed193d9149894eee0434336ef6082 +size 88277 diff --git a/images/Shaft_01582.png b/images/Shaft_01582.png new file mode 100644 index 0000000000000000000000000000000000000000..b14a57ccf28719f044f4eeb87583975cb7a5aae2 --- /dev/null +++ b/images/Shaft_01582.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5602034d4b673e6a3da4726fd0ccc0b148e9efa66d1e0dbae938c87b0b445370 +size 73972 diff --git a/images/Shaft_01583.png b/images/Shaft_01583.png new file mode 100644 index 0000000000000000000000000000000000000000..f60edf3ee058046a637c3b04ff19f7af73fd2a4f --- /dev/null +++ b/images/Shaft_01583.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4177ec283598471022f1eaa9af5c23a934fe19b8c06bcde8f2b8b30a6afa5a6 +size 80673 diff --git a/images/Shaft_01584.png b/images/Shaft_01584.png new file mode 100644 index 0000000000000000000000000000000000000000..bac3d1b340695b30ba9aea4fb6b00bc2249fe59c --- /dev/null +++ b/images/Shaft_01584.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c44fd314e1032a6c28c9244c324498eb4f0e763922db9bbe84cefbf314162d0 +size 83400 diff --git a/images/Shaft_01585.png b/images/Shaft_01585.png new file mode 100644 index 0000000000000000000000000000000000000000..7d168d0e24145adf4faac115b2b16a4a8b2f4300 --- /dev/null +++ b/images/Shaft_01585.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7309aefc7a632632fd9b0094c75be44c5461040f97dac42ddac4c2d5b9501d95 +size 86924 diff --git a/images/Shaft_01586.png b/images/Shaft_01586.png new file mode 100644 index 0000000000000000000000000000000000000000..78d3d4408205de4ed13431dfd4e2a19457dcd828 --- /dev/null +++ b/images/Shaft_01586.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5733a4802638f225510c12fbeb5b187e9fb3e0d455801ed167b2e7bbd1f09027 +size 84570 diff --git a/images/Shaft_01587.png b/images/Shaft_01587.png new file mode 100644 index 0000000000000000000000000000000000000000..4ca24a85b90c57684cb9b1deab9d6109622f4014 --- /dev/null +++ b/images/Shaft_01587.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39a302e88eecf10777880414635243a42d3ff288b10aecfdf861f43af53db92a +size 85062 diff --git a/images/Shaft_01588.png b/images/Shaft_01588.png new file mode 100644 index 0000000000000000000000000000000000000000..4965e69c1455c5bdd84e488bf86985b3f122f2a0 --- /dev/null +++ b/images/Shaft_01588.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9da899a69f0e4e66122159622be9d2ed41c34a4e73043179a25e824f8e01dd80 +size 84644 diff --git a/images/Shaft_01589.png b/images/Shaft_01589.png new file mode 100644 index 0000000000000000000000000000000000000000..5a2b13d239579c004a476c6aa56d2194007045ba --- /dev/null +++ b/images/Shaft_01589.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:701248b18447ab863c130072981218fb4290153408ec00759cbf61f973321b28 +size 96638 diff --git a/images/Shaft_01590.png b/images/Shaft_01590.png new file mode 100644 index 0000000000000000000000000000000000000000..9974d7437387ef7e999618a8798ae5c6e1448637 --- /dev/null +++ b/images/Shaft_01590.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da84ae674983b13922177d20dde38f3db08fcef0a1d41f1c3e976be582d46af1 +size 87486 diff --git a/images/Shaft_01591.png b/images/Shaft_01591.png new file mode 100644 index 0000000000000000000000000000000000000000..efca82474e44ebea8bba4d295283c509be17a92c --- /dev/null +++ b/images/Shaft_01591.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c009d67ba556ec9e8746a0290cf36abf29a5bb14609242781714f25bf7f4ec7e +size 81877 diff --git a/images/Shaft_01592.png b/images/Shaft_01592.png new file mode 100644 index 0000000000000000000000000000000000000000..02d3178d508035663e732004e600a9acb3cc071e --- /dev/null +++ b/images/Shaft_01592.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:178b1bd9ac5d64a45ba81ed00599639cf24476da9bcdb318ca09b70bf8ff7f70 +size 89848 diff --git a/images/Shaft_01593.png b/images/Shaft_01593.png new file mode 100644 index 0000000000000000000000000000000000000000..17df94109c96c18c723e21f0fc4a26ec60f5aeb7 --- /dev/null +++ b/images/Shaft_01593.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec356801fccf6c5d1aee3d5522dde821736d2eab9bd8ea0d887ab8ced6d07ba0 +size 80581 diff --git a/images/Shaft_01594.png b/images/Shaft_01594.png new file mode 100644 index 0000000000000000000000000000000000000000..33b0bb7ff321c5b66959ad53112002c59348140d --- /dev/null +++ b/images/Shaft_01594.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63ebd4cc1393a47ff83572f6bfc680a71c4356b487fe45e394df3a612f04b23d +size 73690 diff --git a/images/Shaft_01595.png b/images/Shaft_01595.png new file mode 100644 index 0000000000000000000000000000000000000000..a62f9fd172cfb75349868ba391a9573402f554f2 --- /dev/null +++ b/images/Shaft_01595.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9647c8c778a62701c84ae136eaf575fc5fc9e69a6733a47cdcdd7055c6f39b97 +size 93947 diff --git a/images/Shaft_01596.png b/images/Shaft_01596.png new file mode 100644 index 0000000000000000000000000000000000000000..89f643f35202c8b08f6347a4044d62353f5550f4 --- /dev/null +++ b/images/Shaft_01596.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60c3da130d184aa455de8153ffa04046a27ebf1f4b8a5d28cac018c6cefa5a99 +size 107189 diff --git a/images/Shaft_01597.png b/images/Shaft_01597.png new file mode 100644 index 0000000000000000000000000000000000000000..8ace3738757b9c863793fdcee90d029590c5f3d2 --- /dev/null +++ b/images/Shaft_01597.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01974e5198ecdb62a1259f396b91edc5be760ad5b52f766f349342c451150e63 +size 100586 diff --git a/images/Shaft_01598.png b/images/Shaft_01598.png new file mode 100644 index 0000000000000000000000000000000000000000..26a725f181159fc3c8e34934e76c27971725d34b --- /dev/null +++ b/images/Shaft_01598.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:effdadd7319edf960510aee433461577e05fcc062fc83a505516fb85a3cd9ca9 +size 103351 diff --git a/images/Shaft_01599.png b/images/Shaft_01599.png new file mode 100644 index 0000000000000000000000000000000000000000..57cfc589c537ada5c37743936224e00129f2857a --- /dev/null +++ b/images/Shaft_01599.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:468c487b208adb0b4e89b231940c82b0cff95fbdd67d8e5b1bb7e19bfadd2791 +size 93283 diff --git a/images/Shaft_01600.png b/images/Shaft_01600.png new file mode 100644 index 0000000000000000000000000000000000000000..dd04ae337af1e8652181df896cdd992dd424140f --- /dev/null +++ b/images/Shaft_01600.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fff31531d061817e842aa24b06e24f67efbe1aaf9e9c724bfcd7247b33b21aca +size 80997 diff --git a/images/Shaft_01601.png b/images/Shaft_01601.png new file mode 100644 index 0000000000000000000000000000000000000000..190ba427a9f60b0da99e2e90fc798320fd8a8b21 --- /dev/null +++ b/images/Shaft_01601.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98cdc84b91f83d3e8e20df3e9cb7ff9cb9b1f1b0c97d69fe2203601d494d634b +size 72506 diff --git a/images/Shaft_01602.png b/images/Shaft_01602.png new file mode 100644 index 0000000000000000000000000000000000000000..9f0c10d5b22cca434264dc7ff6f5711a5b8a9472 --- /dev/null +++ b/images/Shaft_01602.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28a6b41a84ca9b4586aba00979357140281cd29c14b0112bf3bb3ef4656ac6d5 +size 103427 diff --git a/images/Shaft_01603.png b/images/Shaft_01603.png new file mode 100644 index 0000000000000000000000000000000000000000..112382a216fc17694608860767cef702b8cdac01 --- /dev/null +++ b/images/Shaft_01603.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59e98de596b6bfd5e3e04faa2b01ca878799dfd73411f252ed2a1f029799a9b1 +size 105545 diff --git a/images/Shaft_01604.png b/images/Shaft_01604.png new file mode 100644 index 0000000000000000000000000000000000000000..98584402fc92560663abf15586a3160f30bc8f6a --- /dev/null +++ b/images/Shaft_01604.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8998c0b618e24f099aedd6ddbe0ea737e0a5175fc498d239fd0b5ef5b00dfc42 +size 120353 diff --git a/images/Shaft_01605.png b/images/Shaft_01605.png new file mode 100644 index 0000000000000000000000000000000000000000..e3d753f488e317e3712e4c4eb85c2861e7c6de95 --- /dev/null +++ b/images/Shaft_01605.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d301d8f87c5ec010060fae4575bb5c7c11e9784b12a7a7539e3156fc782f91c4 +size 77149 diff --git a/images/Shaft_01606.png b/images/Shaft_01606.png new file mode 100644 index 0000000000000000000000000000000000000000..944a7d3ebd3a21ef9d941ce0984967f4dc2a7d77 --- /dev/null +++ b/images/Shaft_01606.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e86d703fd0bbefb6ecb6f66afd104b4cd6292af8f62add679275ebe7c0bb0cdb +size 83051 diff --git a/images/Shaft_01607.png b/images/Shaft_01607.png new file mode 100644 index 0000000000000000000000000000000000000000..dcc8e0d76bdec8f3ff498f01f70d41b5d9790793 --- /dev/null +++ b/images/Shaft_01607.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d403d851797f4dddfa0cb7fe64d0f5ffb112b5a656d46fe6c2a269ff74523ee +size 83601 diff --git a/images/Shaft_01608.png b/images/Shaft_01608.png new file mode 100644 index 0000000000000000000000000000000000000000..416838dc2881e00eba7b0997975ea2f8a13a3de8 --- /dev/null +++ b/images/Shaft_01608.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72353fc907f6943ac06be514de6f2d568dcd2ba41e136db2d6a3f8b2959b591e +size 71789 diff --git a/images/Shaft_01609.png b/images/Shaft_01609.png new file mode 100644 index 0000000000000000000000000000000000000000..29b6f3cb051911a024ee6b422ddde508fe8b2063 --- /dev/null +++ b/images/Shaft_01609.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a55340b566486f673b75a8e9bdf2b6955bb160da43865ef51d1e73ebc0685e6 +size 103909 diff --git a/images/Shaft_01610.png b/images/Shaft_01610.png new file mode 100644 index 0000000000000000000000000000000000000000..57b8d34d4e591a76cc50e290ee533d0982c777b5 --- /dev/null +++ b/images/Shaft_01610.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e09dec830a7907f0ecd6214b4f284e908148e057231fbbbb614fa66fd57848e4 +size 77576 diff --git a/images/Shaft_01611.png b/images/Shaft_01611.png new file mode 100644 index 0000000000000000000000000000000000000000..98c6e8b968e3e405d57170c33ea402dcf3f98747 --- /dev/null +++ b/images/Shaft_01611.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30abef2f0c7a4f2ffa5db6bc757cd506ef4e1ed2d82880b5bc667962fc4ec25b +size 87664 diff --git a/images/Shaft_01612.png b/images/Shaft_01612.png new file mode 100644 index 0000000000000000000000000000000000000000..ef0b38efff205120765abc2a27e790c1ecdd5abc --- /dev/null +++ b/images/Shaft_01612.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30703c1a6642eb96dd57aa1b9357150524bdeb7ffb9df569178197c2c6ad8cdb +size 98878 diff --git a/images/Shaft_01613.png b/images/Shaft_01613.png new file mode 100644 index 0000000000000000000000000000000000000000..3de4b5a6f2df757ffb9a076cd0d9d04d4ed1d9f3 --- /dev/null +++ b/images/Shaft_01613.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9037078a4a4ab6256ed0658b33dfd6e5aa75f909cacc1d12a1965cfe2f890b0 +size 102184 diff --git a/images/Shaft_01614.png b/images/Shaft_01614.png new file mode 100644 index 0000000000000000000000000000000000000000..6389fee75b2ad3f83fc82f2479b599005ebc324f --- /dev/null +++ b/images/Shaft_01614.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69c8c63a2b15f9aa8621d097fd8c278cd55bd5149693e08b97dd7acb59880728 +size 79622 diff --git a/images/Shaft_01615.png b/images/Shaft_01615.png new file mode 100644 index 0000000000000000000000000000000000000000..51bdf3298db422da562e319cf4d34c2a0eb2006a --- /dev/null +++ b/images/Shaft_01615.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa8b770a156fecdb37cf4951ae2d5f974c92dd038a9b43964b36ea52d930a8f3 +size 70764 diff --git a/images/Shaft_01616.png b/images/Shaft_01616.png new file mode 100644 index 0000000000000000000000000000000000000000..5f7440ab36f25c39f0b004b09691e7e982d3f695 --- /dev/null +++ b/images/Shaft_01616.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:025013d3589c42f3ba08e4a8f10db76c3e649db34c63896d60c7eab8266ba19a +size 85320 diff --git a/images/Shaft_01617.png b/images/Shaft_01617.png new file mode 100644 index 0000000000000000000000000000000000000000..0d0a92f81805bb29f127cc98b88f661859bd0487 --- /dev/null +++ b/images/Shaft_01617.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9057adf95cf53b2cc3ef091e7cf5c5b7c0163d323e5a04f4f86ab0eec52386a3 +size 71320 diff --git a/images/Shaft_01618.png b/images/Shaft_01618.png new file mode 100644 index 0000000000000000000000000000000000000000..24178b8a594960388d79ca957ae3c80c945383c6 --- /dev/null +++ b/images/Shaft_01618.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40c01a8766787263ac695ed4719fb83c833652b6150db83f8e4212bcf6854157 +size 86496 diff --git a/images/Shaft_01619.png b/images/Shaft_01619.png new file mode 100644 index 0000000000000000000000000000000000000000..1b27619687ef4d99d905a75f6b6d712db4853970 --- /dev/null +++ b/images/Shaft_01619.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:590d5fcc97f6ebfefbad733b28e5075083443ff11c8253b997f7d199be02c769 +size 102904 diff --git a/images/Shaft_01620.png b/images/Shaft_01620.png new file mode 100644 index 0000000000000000000000000000000000000000..1f33451102a6cf00a81985739f333a1504c0b83e --- /dev/null +++ b/images/Shaft_01620.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e37f73a6612eaa90736970cff0504501c9fac3cdd539c5d59682af449d0da75e +size 100070 diff --git a/images/Shaft_01621.png b/images/Shaft_01621.png new file mode 100644 index 0000000000000000000000000000000000000000..d78031c879e29d4b4fa14eb7732b987a9813ce6a --- /dev/null +++ b/images/Shaft_01621.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f345a7499b8fcf0e30b4cd2c0cc3a105dba75961afb97953ed0f4c3e2e47b1d +size 69555 diff --git a/images/Shaft_01622.png b/images/Shaft_01622.png new file mode 100644 index 0000000000000000000000000000000000000000..5664fb568e921597a378453479813c92d6a68ced --- /dev/null +++ b/images/Shaft_01622.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09208a338d9e55390b17a0e1db7fdf533dcb2a9d096247351bf8f0a30fe404d1 +size 84420 diff --git a/images/Shaft_01623.png b/images/Shaft_01623.png new file mode 100644 index 0000000000000000000000000000000000000000..2f32a4efd13530136bb3595f626deed926b69c93 --- /dev/null +++ b/images/Shaft_01623.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:251e376357c17e0f8938bbf719c98c7d011d9161aee24298849bb12fbc8ad877 +size 87344 diff --git a/images/Shaft_01624.png b/images/Shaft_01624.png new file mode 100644 index 0000000000000000000000000000000000000000..7c81d44ec59506b1b3d4fca1cd303da5dad59e27 --- /dev/null +++ b/images/Shaft_01624.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86daddafd0fb1cde7614e39e9e36b60f87471aa39aace22c44352d153729c7e6 +size 90806 diff --git a/images/Shaft_01625.png b/images/Shaft_01625.png new file mode 100644 index 0000000000000000000000000000000000000000..bca0ea057e3031a0fd4e3ea22e248cf5c380f919 --- /dev/null +++ b/images/Shaft_01625.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:feaf6ee51fd6210f6ed1a918822fafa01b292e2d8343799ec27eb8237837313c +size 90880 diff --git a/images/Shaft_01626.png b/images/Shaft_01626.png new file mode 100644 index 0000000000000000000000000000000000000000..fe603dba49c14bcf34359ac7b05d78b91732e93d --- /dev/null +++ b/images/Shaft_01626.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca72398ac5f0361bd27dda022e35bbdb2c84cabd790443b699065a99fcda6a0e +size 78311 diff --git a/images/Shaft_01627.png b/images/Shaft_01627.png new file mode 100644 index 0000000000000000000000000000000000000000..143706f207640e9eef738def3c88b0b733a4f4b6 --- /dev/null +++ b/images/Shaft_01627.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c6e97b3b2cd5370e12f20c4b4f774719410fa6e5c59a8c92341ac32e4d4c0c8 +size 71448 diff --git a/images/Shaft_01628.png b/images/Shaft_01628.png new file mode 100644 index 0000000000000000000000000000000000000000..6eaa692fc744b4cd15e703fbfbfb65c4a3f66ccc --- /dev/null +++ b/images/Shaft_01628.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:578f89fc787925eb0611634a9bf8003a733157616b89531f80101691f7733946 +size 94822 diff --git a/images/Shaft_01629.png b/images/Shaft_01629.png new file mode 100644 index 0000000000000000000000000000000000000000..206649bd0186008bbaf01e916f1eaef9b5c3d1ed --- /dev/null +++ b/images/Shaft_01629.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:890bdedd122a73d330976bfc03e25732411046e1e164bff9f6977cff9a25475b +size 80235 diff --git a/images/Shaft_01630.png b/images/Shaft_01630.png new file mode 100644 index 0000000000000000000000000000000000000000..6fd90f8e660a9627295c21c41773650c076b6830 --- /dev/null +++ b/images/Shaft_01630.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2392eec68f9242984e095d50dee6ec9242ad60846f5f45dd59166cfa33a23c0c +size 87354 diff --git a/images/Shaft_01631.png b/images/Shaft_01631.png new file mode 100644 index 0000000000000000000000000000000000000000..800bb9b523abf9f6f939321e6837f52dd5455658 --- /dev/null +++ b/images/Shaft_01631.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77a4dcbe07151fb64dabfd585452f5a7ec649f0be0beaf48f81555d49395c96e +size 69602 diff --git a/images/Shaft_01632.png b/images/Shaft_01632.png new file mode 100644 index 0000000000000000000000000000000000000000..cbab24fe118c7e7511d67cc3a7ed2eeb58564472 --- /dev/null +++ b/images/Shaft_01632.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33aad8a7d6c4c388c38102e9eff537e03cc7ce1db2a1e075a5b99c7a3a85f8af +size 70480 diff --git a/images/Shaft_01633.png b/images/Shaft_01633.png new file mode 100644 index 0000000000000000000000000000000000000000..b35f9aedcc0638dea7170896810c47e3419337d2 --- /dev/null +++ b/images/Shaft_01633.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c91b86efe7db9342b4b49729edd57d428f1f9c1b7a80d1a0e2b5a7089aea57d5 +size 75007 diff --git a/images/Shaft_01634.png b/images/Shaft_01634.png new file mode 100644 index 0000000000000000000000000000000000000000..9d3efa8e8b019438ebfcea4957cd66b1d38e0a32 --- /dev/null +++ b/images/Shaft_01634.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4cf1ba179e92e3201ffa6c284ed2eed9dc479a11473cdeb4fc6f92e0b0f17b4 +size 80915 diff --git a/images/Shaft_01635.png b/images/Shaft_01635.png new file mode 100644 index 0000000000000000000000000000000000000000..d854d8d9369be282dc764e06b7568b6c320bf9c2 --- /dev/null +++ b/images/Shaft_01635.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50f9e5161d6f8941271121edaad6313c24e4ae88a5b029f75c0b0487aac0e055 +size 69145 diff --git a/images/Shaft_01636.png b/images/Shaft_01636.png new file mode 100644 index 0000000000000000000000000000000000000000..c7b8b1f26b4c0c14249048f1628564e70902082b --- /dev/null +++ b/images/Shaft_01636.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a832922c7c561ec6cc4c6d7085bfe081393ae55f2667b81147b4fbe4c81dd9ae +size 99918 diff --git a/images/Shaft_01637.png b/images/Shaft_01637.png new file mode 100644 index 0000000000000000000000000000000000000000..026fcbcacc758659998567478d725f2c803607f7 --- /dev/null +++ b/images/Shaft_01637.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14824130937fe10bdd5c9c41c5fcea15bb26f084e9fcbf85c9ad61b588df1990 +size 70965 diff --git a/images/Shaft_01638.png b/images/Shaft_01638.png new file mode 100644 index 0000000000000000000000000000000000000000..37077b51c12add5fbbb207a0d6eba2d454b503c3 --- /dev/null +++ b/images/Shaft_01638.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e6806fa543cbde888adf2fbcc53b7aea848fb25657c441f72bc37e59c2a0825 +size 86346 diff --git a/images/Shaft_01639.png b/images/Shaft_01639.png new file mode 100644 index 0000000000000000000000000000000000000000..63dac7e5271489e7fbd2c4d5fb69867476f85f0a --- /dev/null +++ b/images/Shaft_01639.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5724d4329f0b8f1c10b28cedbf490a13637cb7ab5e05b783fb3df8037c045072 +size 82431 diff --git a/images/Shaft_01640.png b/images/Shaft_01640.png new file mode 100644 index 0000000000000000000000000000000000000000..be998c978073b9527ac4716ac32dbbf678258b56 --- /dev/null +++ b/images/Shaft_01640.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59a39b047f2c4f40a32a058edb797f00e68d2b731f217d998585fc5d36629d19 +size 83085 diff --git a/images/Shaft_01641.png b/images/Shaft_01641.png new file mode 100644 index 0000000000000000000000000000000000000000..6f45bee1f676ccfbeb2253c30ec49bb3879887e9 --- /dev/null +++ b/images/Shaft_01641.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:791a4a2db57730a73be342e27b3e8e7d76a02fe341d39202b095a4510d3a851a +size 96019 diff --git a/images/Shaft_01642.png b/images/Shaft_01642.png new file mode 100644 index 0000000000000000000000000000000000000000..2dfdca0e0090d8eacf3f58e7f52ef9a084762a93 --- /dev/null +++ b/images/Shaft_01642.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55a1674a848b6c51a7442cd3135a248b00fc6b83f68a4be0c8d7f4e8b6a9312e +size 81949 diff --git a/images/Shaft_01643.png b/images/Shaft_01643.png new file mode 100644 index 0000000000000000000000000000000000000000..8669de72acfdeac34cfe56a64532d3d6cefea457 --- /dev/null +++ b/images/Shaft_01643.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92b5d5873f0ce3d7c1f8e4513bbb7564b7992db89f278e432a10222941efdf7e +size 100300 diff --git a/images/Shaft_01644.png b/images/Shaft_01644.png new file mode 100644 index 0000000000000000000000000000000000000000..53ec79c586404777bdef4ecd9817a3a823f14b34 --- /dev/null +++ b/images/Shaft_01644.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5a997ae6353cff2160fde79da46505dfcacfd4068d2969520d99281c38ec0b7 +size 100816 diff --git a/images/Shaft_01645.png b/images/Shaft_01645.png new file mode 100644 index 0000000000000000000000000000000000000000..addb1fe5a6f847c4877919cb368fa60453be7d78 --- /dev/null +++ b/images/Shaft_01645.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82dadaf8daee9202177df231a61869f4e042776d19e1eb90f4f209a867b30ec1 +size 90336 diff --git a/images/Shaft_01646.png b/images/Shaft_01646.png new file mode 100644 index 0000000000000000000000000000000000000000..06dc79abaf0be22555bf1cdc557cad4477534ec1 --- /dev/null +++ b/images/Shaft_01646.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b001f14bf7d8092074150112bcb4a5c47f39c3acbfc6d1fcef85061e2390a3c +size 82646 diff --git a/images/Shaft_01647.png b/images/Shaft_01647.png new file mode 100644 index 0000000000000000000000000000000000000000..67843ffcd23deed666d060688c01a828a58e695a --- /dev/null +++ b/images/Shaft_01647.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:513e9b57fc802977b4a1d374dbff46109ac6aa5f3ca8ea75fe23882e688d8d52 +size 76721 diff --git a/images/Shaft_01648.png b/images/Shaft_01648.png new file mode 100644 index 0000000000000000000000000000000000000000..3e8957ac7e40f1eeb7091ec220cdeac0a70ffa19 --- /dev/null +++ b/images/Shaft_01648.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b04c7960dc4a50629e1e22cd286d3d0010a3d8cfbb9a6511ed5f9aae668867fd +size 104044 diff --git a/images/Shaft_01649.png b/images/Shaft_01649.png new file mode 100644 index 0000000000000000000000000000000000000000..26aac450f182668819cd6ba92acb3de7e766db9d --- /dev/null +++ b/images/Shaft_01649.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f68b9d7c2f26b3937629326d212b3e9550791d7e9fb2785a42fb58ec8a7b5171 +size 80323 diff --git a/images/Shaft_01650.png b/images/Shaft_01650.png new file mode 100644 index 0000000000000000000000000000000000000000..caa65cbac19bd13e402fd9d73a7530b7c92fdfe3 --- /dev/null +++ b/images/Shaft_01650.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64ca658ad99e46afce89ee6f4203dc7722d1c7b44f2dc1a484c9d03d2cb4a014 +size 81757 diff --git a/images/Shaft_01651.png b/images/Shaft_01651.png new file mode 100644 index 0000000000000000000000000000000000000000..2e0e569a70433a3e97b50d16cf4c6c27d0c4631b --- /dev/null +++ b/images/Shaft_01651.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dcb24d75049ffb6a8ecf37693251e77e59d64071345cb6af2ceeba8694044e6 +size 67593 diff --git a/images/Shaft_01652.png b/images/Shaft_01652.png new file mode 100644 index 0000000000000000000000000000000000000000..eef808662d164b4419d226e0a4d6b95378a1ef37 --- /dev/null +++ b/images/Shaft_01652.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:703b6371ad6cd8f5fb44be3e04e11da38bb948f6a939ee0df948f03dfb1cb2d4 +size 93747 diff --git a/images/Shaft_01653.png b/images/Shaft_01653.png new file mode 100644 index 0000000000000000000000000000000000000000..6bfad9734d6b55bc3da42ffc13a8e91a70b24604 --- /dev/null +++ b/images/Shaft_01653.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adc30dc4919a5a0083bbbdf39429c30755246870cc18866961f72cd095a13bf0 +size 67964 diff --git a/images/Shaft_01654.png b/images/Shaft_01654.png new file mode 100644 index 0000000000000000000000000000000000000000..e17f1fe336c5b8ed79121d89337be923f3080e3d --- /dev/null +++ b/images/Shaft_01654.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29dd5b83d2d103b6b88f5e756fcc4e5330613c2bfcb8196ea0bd974b3559da0a +size 68975 diff --git a/images/Shaft_01655.png b/images/Shaft_01655.png new file mode 100644 index 0000000000000000000000000000000000000000..4137ee09f4ed2d525a6984c4a557b4cbdbff1ff4 --- /dev/null +++ b/images/Shaft_01655.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:216e9106dc058a16f307685a16f3d7af270c73e1199559433dd3dd7341c50912 +size 71567 diff --git a/images/Shaft_01656.png b/images/Shaft_01656.png new file mode 100644 index 0000000000000000000000000000000000000000..70ec92c3729c39a286890f13800df79eab7b29d4 --- /dev/null +++ b/images/Shaft_01656.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d953aed48ef4df0f1cd0533ff5ec88bfaebd3027157f4ef48cd690c820ba2825 +size 97536 diff --git a/images/Shaft_01657.png b/images/Shaft_01657.png new file mode 100644 index 0000000000000000000000000000000000000000..c42d3e76d870752bdbeaad108ce1028dc3aa083d --- /dev/null +++ b/images/Shaft_01657.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81439f6a2bd182ef89540df40cc0696f9fde14045464c9ae4d2c4f582e2437e3 +size 85579 diff --git a/images/Shaft_01658.png b/images/Shaft_01658.png new file mode 100644 index 0000000000000000000000000000000000000000..2f225ce5fd2e14b4bd7acf64b170f55dbf7c8d2b --- /dev/null +++ b/images/Shaft_01658.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5ebb263c04bf088caab3c4d0c29cdf29d20dd9cf1892b6016a5f2e175eb59fa +size 104525 diff --git a/images/Shaft_01659.png b/images/Shaft_01659.png new file mode 100644 index 0000000000000000000000000000000000000000..741029d79fa948d43039268b88d660e65f187624 --- /dev/null +++ b/images/Shaft_01659.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:763eb6ea659631d0c13b3484157479da46cc0cb1b0a002cc68e4abe28fa4cf7d +size 107076 diff --git a/images/Shaft_01660.png b/images/Shaft_01660.png new file mode 100644 index 0000000000000000000000000000000000000000..5b95c093ea041b027434cee141de9d39618ed0c1 --- /dev/null +++ b/images/Shaft_01660.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8993524915b03ab8e4673c902325d4b04130e42289ad999d49b752faf755318 +size 105981 diff --git a/images/Shaft_01661.png b/images/Shaft_01661.png new file mode 100644 index 0000000000000000000000000000000000000000..21352b55d088f0a72bb1cf7169a5c4502eb1111e --- /dev/null +++ b/images/Shaft_01661.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1228b7cfb06e504b52ca80cf8207f8c43651694c66adef8f3a0b1e622bf6c5b +size 81305 diff --git a/images/Shaft_01662.png b/images/Shaft_01662.png new file mode 100644 index 0000000000000000000000000000000000000000..4cc455985451dfc660ce05015aa62f994fcf9c28 --- /dev/null +++ b/images/Shaft_01662.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89bd47a09a0ef6025c92693e3fe66d4e2fd3ad0829aec46dc19e91282af90edb +size 108495 diff --git a/images/Shaft_01663.png b/images/Shaft_01663.png new file mode 100644 index 0000000000000000000000000000000000000000..f8bfe9d55bbce5e00ec971ad98b38faa6db81173 --- /dev/null +++ b/images/Shaft_01663.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3f0db7ac1d09374d1d94a55d26e720ea3e2581d5e8035720129b016412f4b12 +size 91356 diff --git a/images/Shaft_01664.png b/images/Shaft_01664.png new file mode 100644 index 0000000000000000000000000000000000000000..7fd8f1c805b5578df073729663816e45c88e477c --- /dev/null +++ b/images/Shaft_01664.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06b8ab8149d87818b24a8151d9c739dd4452b390f4745b8c8cec35971b4e98ca +size 70792 diff --git a/images/Shaft_01665.png b/images/Shaft_01665.png new file mode 100644 index 0000000000000000000000000000000000000000..4c80b633be756d9995cb6026bc422a444c611d67 --- /dev/null +++ b/images/Shaft_01665.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6972b62e759ef94adf7f14457789cc1f00fb8dbfd92054919114fc16c4d7845d +size 109777 diff --git a/images/Shaft_01666.png b/images/Shaft_01666.png new file mode 100644 index 0000000000000000000000000000000000000000..c5848e414edb35d2c62fd840c1ec84cbda9cdcaa --- /dev/null +++ b/images/Shaft_01666.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36a0498bd83ad69c094e2baffd7201f22c7650523952b0a455f541eef1eafa74 +size 80324 diff --git a/images/Shaft_01667.png b/images/Shaft_01667.png new file mode 100644 index 0000000000000000000000000000000000000000..a25ce20bb4ba6d5b5b785607b90e01faa21905ff --- /dev/null +++ b/images/Shaft_01667.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c934e734391a42f1253cd772ffe5771de8966298d54794ebd3a4d130ec896f73 +size 76259 diff --git a/images/Shaft_01668.png b/images/Shaft_01668.png new file mode 100644 index 0000000000000000000000000000000000000000..b88e17097b473760d0f5e907fd976111bda60a2a --- /dev/null +++ b/images/Shaft_01668.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09d02ab29a1148eea7468885f3777bf9cf4806980db9915ac70d2ad493e16de2 +size 99917 diff --git a/images/Shaft_01669.png b/images/Shaft_01669.png new file mode 100644 index 0000000000000000000000000000000000000000..e6141629f01bede75931a50cbfe58a6b27f6333b --- /dev/null +++ b/images/Shaft_01669.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c476dd29c5757289ff9ff2e7208e47604ee5862ddc6ac74ddce8199b42680fd0 +size 106052 diff --git a/images/Shaft_01670.png b/images/Shaft_01670.png new file mode 100644 index 0000000000000000000000000000000000000000..e65d715fd83d1bb022c999a36309f6d39ce77571 --- /dev/null +++ b/images/Shaft_01670.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73cac0738e567f1bb2ab7ebca08bd6a312be50fa57e61125e7ac15d7375d2a18 +size 78245 diff --git a/images/Shaft_01671.png b/images/Shaft_01671.png new file mode 100644 index 0000000000000000000000000000000000000000..d1a0eb23413ec256db3f1e41cfd6adf3f45179aa --- /dev/null +++ b/images/Shaft_01671.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d92cb1759c7baffdb7d9989c0c80df20146041ba3e6b0835c0b635ad98584993 +size 77378 diff --git a/images/Shaft_01672.png b/images/Shaft_01672.png new file mode 100644 index 0000000000000000000000000000000000000000..f57ef3439c98201c167cbfc2f1f8881759397237 --- /dev/null +++ b/images/Shaft_01672.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbda92c39cda74d5f3bec6ce1d1e56b5505323a3bae7a1d43b3d5d0dc006f672 +size 83660 diff --git a/images/Shaft_01673.png b/images/Shaft_01673.png new file mode 100644 index 0000000000000000000000000000000000000000..4e9f9ff1ef87e2d55a326facbcf6b0103537d039 --- /dev/null +++ b/images/Shaft_01673.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:087c71d27c6fe69e63bca86af058f9786627673978aa90d59a75bd5d0a75a2a4 +size 82301 diff --git a/images/Shaft_01674.png b/images/Shaft_01674.png new file mode 100644 index 0000000000000000000000000000000000000000..2453994bf4d5816bc3ac5d2584b3cf8b610bdd5f --- /dev/null +++ b/images/Shaft_01674.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e87304c13edf38feaf9a92f43033be4d2a65a799e4fa034d6b72d50d73eb3846 +size 70511 diff --git a/images/Shaft_01675.png b/images/Shaft_01675.png new file mode 100644 index 0000000000000000000000000000000000000000..5e3956814e10baf51f8167597198a99731fda20f --- /dev/null +++ b/images/Shaft_01675.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e71050c28c74ee70d16a38ab338717a6e1b6b1aacb28a7e851fc5ddf44b04601 +size 105639 diff --git a/images/Shaft_01676.png b/images/Shaft_01676.png new file mode 100644 index 0000000000000000000000000000000000000000..f2b5981a0d1c59dc344f8c6ba961297ef81adde6 --- /dev/null +++ b/images/Shaft_01676.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3332a53ec41daf194d0824dee4892f4b1c3db2d5c64727191dc1622fafd6d5f +size 102194 diff --git a/images/Shaft_01677.png b/images/Shaft_01677.png new file mode 100644 index 0000000000000000000000000000000000000000..03f58f02e4fb5977d96be4c9865d0f155675c97b --- /dev/null +++ b/images/Shaft_01677.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6303be73303924b0afd4121b08a4bb726a03d56c8f9f08c29820ae30630b40d7 +size 81499 diff --git a/images/Shaft_01678.png b/images/Shaft_01678.png new file mode 100644 index 0000000000000000000000000000000000000000..232467752620224d3c46c813d71d283c6962c0e9 --- /dev/null +++ b/images/Shaft_01678.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4486338d20be8d2568a46e1f03f883871ae93a5c24664d2fd32bfc9c075be6b3 +size 101996 diff --git a/images/Shaft_01679.png b/images/Shaft_01679.png new file mode 100644 index 0000000000000000000000000000000000000000..d71c68870b422cfa2b382442956771e5b16407ff --- /dev/null +++ b/images/Shaft_01679.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:219c6a61818c77bc6993def5e9affcab001dff94376f0f33d52f570a33b12c63 +size 98260 diff --git a/images/Shaft_01680.png b/images/Shaft_01680.png new file mode 100644 index 0000000000000000000000000000000000000000..fcc49666731a1f2f65147ff4d90015c8f9cfc579 --- /dev/null +++ b/images/Shaft_01680.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc86378ac80cb0f943754f323d827a999a146e7b4f35d805ef9bc7e3e5d505ba +size 82249 diff --git a/images/Shaft_01681.png b/images/Shaft_01681.png new file mode 100644 index 0000000000000000000000000000000000000000..f2298efc9087f8a4a90da035028eaf15a855579f --- /dev/null +++ b/images/Shaft_01681.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94bc76078619ea18436ff7aa365a91afbbac315413a630d10b1edeb3a45400b2 +size 72621 diff --git a/images/Shaft_01682.png b/images/Shaft_01682.png new file mode 100644 index 0000000000000000000000000000000000000000..7c7b8cc038c2cf310df79e6d0efb0e3bd6561b8f --- /dev/null +++ b/images/Shaft_01682.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01fffac377e279b96818bd5ed4c8767bfb2d8c5b20486b23527506a2816c79c1 +size 84561 diff --git a/images/Shaft_01683.png b/images/Shaft_01683.png new file mode 100644 index 0000000000000000000000000000000000000000..6394d8f1f1e13fc7ab66771edfcb4da7b99ccb75 --- /dev/null +++ b/images/Shaft_01683.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:986a4fab5594649d7be5e2749e51b80cd357704fabd7d45aff525927907f5239 +size 73639 diff --git a/images/Shaft_01684.png b/images/Shaft_01684.png new file mode 100644 index 0000000000000000000000000000000000000000..18ae45cdfeca4cba8019d569ff38fc505d340ff7 --- /dev/null +++ b/images/Shaft_01684.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64fe2a9ef3ac385676c39170320dc01fc8dac0bd2af3a841ad9a534cc61a38e6 +size 85627 diff --git a/images/Shaft_01685.png b/images/Shaft_01685.png new file mode 100644 index 0000000000000000000000000000000000000000..1be7853b2d3cc450badb248d80b20e83910de42d --- /dev/null +++ b/images/Shaft_01685.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86f20998933d0976b6c6f8d5c41fb0ffaa40d690f8ac6e9945b9506ce8783668 +size 72523 diff --git a/images/Shaft_01686.png b/images/Shaft_01686.png new file mode 100644 index 0000000000000000000000000000000000000000..7d23aeebee5709a002f207546ae0eaabf2492acc --- /dev/null +++ b/images/Shaft_01686.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b88258bbc6adb63932c2fe71aae46209ed559e714ed8be0cddeb318192db269 +size 109213 diff --git a/images/Shaft_01687.png b/images/Shaft_01687.png new file mode 100644 index 0000000000000000000000000000000000000000..58c60b0d26fd2ea7d0fdd5999354171fae3f8e95 --- /dev/null +++ b/images/Shaft_01687.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b2124748d800a075107f7639603857587e4cea2d40a89e9385daf7eb8239e58 +size 82214 diff --git a/images/Shaft_01688.png b/images/Shaft_01688.png new file mode 100644 index 0000000000000000000000000000000000000000..bf11ad4674dddf88bc2b2071a6a484d2d44ad915 --- /dev/null +++ b/images/Shaft_01688.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d504532f4e171a09f670cd6731c8ad455bce48d5ea3917db326bee50fc57eda8 +size 89303 diff --git a/images/Shaft_01689.png b/images/Shaft_01689.png new file mode 100644 index 0000000000000000000000000000000000000000..c94ea3f027df5e20988c133f7d49837e0486ae0a --- /dev/null +++ b/images/Shaft_01689.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9797148edf38dae65beb8623b3b1dbccbd27439a298982d985785a6ad11d0f71 +size 80671 diff --git a/images/Shaft_01690.png b/images/Shaft_01690.png new file mode 100644 index 0000000000000000000000000000000000000000..861b09d0ec0d301f17414234e6a7058ece81cf55 --- /dev/null +++ b/images/Shaft_01690.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3300dc55493f4ac74ab17a281c247bc9bbdf9813364d91f44b579509ea8e310 +size 85664 diff --git a/images/Shaft_01691.png b/images/Shaft_01691.png new file mode 100644 index 0000000000000000000000000000000000000000..10695c59318a547192f23a1a1a7b68b149eceb53 --- /dev/null +++ b/images/Shaft_01691.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afe8679c0d0ddbf3913653d6128abbbfff5b16760ec933b023515a3d8e02dc50 +size 79837 diff --git a/images/Shaft_01692.png b/images/Shaft_01692.png new file mode 100644 index 0000000000000000000000000000000000000000..e5dcbe7711f08ce6cc6089e2ebe2fc6d6e1c09cc --- /dev/null +++ b/images/Shaft_01692.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:671d25b93c21a513615ff82ad0ea896bdf765f3710a42f2473fd021c271a33bb +size 86933 diff --git a/images/Shaft_01693.png b/images/Shaft_01693.png new file mode 100644 index 0000000000000000000000000000000000000000..031a587f125f48ba799737a9088c3422184653cb --- /dev/null +++ b/images/Shaft_01693.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64e633104564e20b96da50cfcb092887deef00373e377605281a4b7c6409d213 +size 113930 diff --git a/images/Shaft_01694.png b/images/Shaft_01694.png new file mode 100644 index 0000000000000000000000000000000000000000..7ca393b935e367865f85c4af1417b0974913bf2c --- /dev/null +++ b/images/Shaft_01694.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bec4b2b5414d825a3965c293230a182d93bf5ea689fa8a8dc4bb91b11a564832 +size 73843 diff --git a/images/Shaft_01695.png b/images/Shaft_01695.png new file mode 100644 index 0000000000000000000000000000000000000000..de60f6c81b505f927a018fc804d89e882815c388 --- /dev/null +++ b/images/Shaft_01695.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96e62f62a008b46a1607fb59f02529b5c8ab544fea9165e69064ea3c34cdaf58 +size 102964 diff --git a/images/Shaft_01696.png b/images/Shaft_01696.png new file mode 100644 index 0000000000000000000000000000000000000000..f53deff58557790cfe575b2743a00b1b6d82cf8d --- /dev/null +++ b/images/Shaft_01696.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c446775eba3f1ea8b6de1eb2fdd415dd4b7deab1ddf2455b2aaa9e6e30407d8 +size 77908 diff --git a/images/Shaft_01697.png b/images/Shaft_01697.png new file mode 100644 index 0000000000000000000000000000000000000000..4b9749ffd31da93c1d4bd43e4c59bd7c31bcc9f4 --- /dev/null +++ b/images/Shaft_01697.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56247952da53565d4b16caacfc4aaa37b03252c17c746464eb17e1a99ea173b4 +size 73979 diff --git a/images/Shaft_01698.png b/images/Shaft_01698.png new file mode 100644 index 0000000000000000000000000000000000000000..2e0a86d084d3d5ae7a688cabd8aee33a8d00da0f --- /dev/null +++ b/images/Shaft_01698.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a069d5191dacf9fccffbec1803b30a8653ed0472aaad373ddb6160c30bebc9e0 +size 114928 diff --git a/images/Shaft_01699.png b/images/Shaft_01699.png new file mode 100644 index 0000000000000000000000000000000000000000..d83f46c45a0f2c661f1c96a3e55259504730b337 --- /dev/null +++ b/images/Shaft_01699.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:927e35cae57a98a7ac2be2cd4649982ad695b9c9926b12af39a3f90e55b5a596 +size 74525 diff --git a/images/Shaft_01700.png b/images/Shaft_01700.png new file mode 100644 index 0000000000000000000000000000000000000000..d3ab3d6e3381ed468948ab0b171f3be1901ae325 --- /dev/null +++ b/images/Shaft_01700.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d5a02d0f1b3b2e56acc9df7e45e3e453aa6c4a66d3bbdbe72a60195a4ac1d8e +size 74353 diff --git a/images/Shaft_01701.png b/images/Shaft_01701.png new file mode 100644 index 0000000000000000000000000000000000000000..9afd7452b8cf5581269c2702db9d21bca5a69b72 --- /dev/null +++ b/images/Shaft_01701.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0cd601b2f0f31c3be6722c9c14f53a96faf6bae8249a18a936c04367331dd32 +size 83566 diff --git a/images/Shaft_01702.png b/images/Shaft_01702.png new file mode 100644 index 0000000000000000000000000000000000000000..65efa13be542bd01a9af02f2bd1fec9bb5742cde --- /dev/null +++ b/images/Shaft_01702.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80acebdf9e7ea0a66ae98539f7b3418861d4129d4f43a2b1562e786f8de39086 +size 88212 diff --git a/images/Shaft_01703.png b/images/Shaft_01703.png new file mode 100644 index 0000000000000000000000000000000000000000..ceb1d1afdd68369635848cdb2bb860402aed14a1 --- /dev/null +++ b/images/Shaft_01703.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f18896b39615d87d9205aa57f65e3eec791c93d86ff5d144b1cc3078274a18e +size 68412 diff --git a/images/Shaft_01704.png b/images/Shaft_01704.png new file mode 100644 index 0000000000000000000000000000000000000000..cbaacb89aad074e22b8ca006b07e0734d7cb4cd9 --- /dev/null +++ b/images/Shaft_01704.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:962395be72acd02e5beb0caca19e9500d89818a6639d844876a5bbde1efa380c +size 79738 diff --git a/images/Shaft_01705.png b/images/Shaft_01705.png new file mode 100644 index 0000000000000000000000000000000000000000..01dd6cb17534c53551a15e3cf728d846e98ce51e --- /dev/null +++ b/images/Shaft_01705.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2228aa76fe3bb32e0afa114ddc6b4d03d29607c87fcdebe11d6d141cc9231094 +size 88808 diff --git a/images/Shaft_01706.png b/images/Shaft_01706.png new file mode 100644 index 0000000000000000000000000000000000000000..4f046570d5ac33ce83f99d7f9564975bbab568a5 --- /dev/null +++ b/images/Shaft_01706.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68ae72c2642ed108e1993db63362c7a36166ee688a5355c993581da968327f0c +size 99565 diff --git a/images/Shaft_01707.png b/images/Shaft_01707.png new file mode 100644 index 0000000000000000000000000000000000000000..3a6faf48559a6147e6b7f11bd766f10155884b1c --- /dev/null +++ b/images/Shaft_01707.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c860a253ec3f5e879d725628ecc5412aeb506fb9fbc0c8676eb812dffbd0d2d5 +size 76727 diff --git a/images/Shaft_01708.png b/images/Shaft_01708.png new file mode 100644 index 0000000000000000000000000000000000000000..fd7f6002051cfae8bf282a946eb909afebf0ff01 --- /dev/null +++ b/images/Shaft_01708.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb5fee9f9551f8651cb030b11d4a518c9e6fead4c4075cdc2d7e3c9739daf40d +size 93945 diff --git a/images/Shaft_01709.png b/images/Shaft_01709.png new file mode 100644 index 0000000000000000000000000000000000000000..acd3975378b53a1aaeeccec05484aa5474cc52ed --- /dev/null +++ b/images/Shaft_01709.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:034215920a994d62832a7bbf05aa803d9151d4a5207311d770de98d3ac773cc0 +size 85918 diff --git a/images/Shaft_01710.png b/images/Shaft_01710.png new file mode 100644 index 0000000000000000000000000000000000000000..71a3a57abcd21e6af6786161e76c1bb4abf2d17e --- /dev/null +++ b/images/Shaft_01710.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6df3ef417e1881017ffb17876f8377b06e91966b7da26b2253faaba79272f7a +size 89907 diff --git a/images/Shaft_01711.png b/images/Shaft_01711.png new file mode 100644 index 0000000000000000000000000000000000000000..2a328ae6600530cbf596877652f587447d02ecaf --- /dev/null +++ b/images/Shaft_01711.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:277dd88ef80009978e6c1604c1994ee49a684cbe042e1acad86c70108d7430ce +size 75551 diff --git a/images/Shaft_01712.png b/images/Shaft_01712.png new file mode 100644 index 0000000000000000000000000000000000000000..a65bd8e59f418d4eca105e808d97a7709c4aa62f --- /dev/null +++ b/images/Shaft_01712.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b230ef55b4b30ead138c09bebed35df9a61153d953b8e9f456c8c72295dcb45 +size 87804 diff --git a/images/Shaft_01713.png b/images/Shaft_01713.png new file mode 100644 index 0000000000000000000000000000000000000000..87eb96352e63ea5a3fd0a4acd9249cc2dd15b795 --- /dev/null +++ b/images/Shaft_01713.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b115a84d2d6c4b51fd7c02278a9b75ec3ad0a911996d2cbb1d8aa479bd31b9b4 +size 91399 diff --git a/images/Shaft_01714.png b/images/Shaft_01714.png new file mode 100644 index 0000000000000000000000000000000000000000..d57f67786c0733d683348b2002182cbca991eba2 --- /dev/null +++ b/images/Shaft_01714.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7afe4cfdbabbe7f96bf3c366b68e045da730685e50aa64dbde7ba0514af4e857 +size 83501 diff --git a/images/Shaft_01715.png b/images/Shaft_01715.png new file mode 100644 index 0000000000000000000000000000000000000000..cf2b645d825d63a878cb02636717b87173ad1b57 --- /dev/null +++ b/images/Shaft_01715.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b853dcdb3b0a7cd5a06a3cf6e9e833fa1dd8de38758a7ffee159d81e1c01f63f +size 68993 diff --git a/images/Shaft_01716.png b/images/Shaft_01716.png new file mode 100644 index 0000000000000000000000000000000000000000..67d88cf50956eb9a166d18a046e123f088bc85fd --- /dev/null +++ b/images/Shaft_01716.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bec236670838553da4dbb05bdb9366a4705c9155e5f64ec6eab8148332bacf6 +size 73125 diff --git a/images/Shaft_01717.png b/images/Shaft_01717.png new file mode 100644 index 0000000000000000000000000000000000000000..13f2de650f15295358ddcd24ae4c224cb679f904 --- /dev/null +++ b/images/Shaft_01717.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ae8775ecf1033aa0d2359d010d1df18ab4208250610de919bddf8c456410456 +size 71095 diff --git a/images/Shaft_01718.png b/images/Shaft_01718.png new file mode 100644 index 0000000000000000000000000000000000000000..93c00bafc3b712cecd82d2757945530417b7a94d --- /dev/null +++ b/images/Shaft_01718.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcc91c72a9cf81cf7bbaabcaffd68e3942a62ab70231435691b251c0c945be3c +size 93574 diff --git a/images/Shaft_01719.png b/images/Shaft_01719.png new file mode 100644 index 0000000000000000000000000000000000000000..a07402eaf8dfd5d5661152e77e157acf1b19c9b2 --- /dev/null +++ b/images/Shaft_01719.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13427f6e35edb27474faafe59a3718bfb61abfc06fb079407c248d07804a61a8 +size 91061 diff --git a/images/Shaft_01720.png b/images/Shaft_01720.png new file mode 100644 index 0000000000000000000000000000000000000000..1ba5b219c9e2e17ac8c9d923ddf341842a55a751 --- /dev/null +++ b/images/Shaft_01720.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11eb9e1f7d15b24163c16c1f5244911ae433d5f0a05a5f4922ae6c458df99dde +size 72562 diff --git a/images/Shaft_01721.png b/images/Shaft_01721.png new file mode 100644 index 0000000000000000000000000000000000000000..1799a14bdeb04529ef6e36ecdcd405dba0a5b692 --- /dev/null +++ b/images/Shaft_01721.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2530b8d8449682245dad75c1b17293e8982c21f67e0ec0544e166e7667dc979e +size 71345 diff --git a/images/Shaft_01722.png b/images/Shaft_01722.png new file mode 100644 index 0000000000000000000000000000000000000000..85ed0bc3b8c73e948315e70f5ea4f74232e97d2d --- /dev/null +++ b/images/Shaft_01722.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b266b5baf884c42d5900709fd26c9b8ff7cf09eac0b111113a869ea279e1fb37 +size 85537 diff --git a/images/Shaft_01723.png b/images/Shaft_01723.png new file mode 100644 index 0000000000000000000000000000000000000000..f74ae9959b253cef5a4c8714ea5453cdba6ffa44 --- /dev/null +++ b/images/Shaft_01723.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f3f2d8da2a0775b228bdc60fea64ec942199ef633de4329e363a7f61d267b13 +size 83749 diff --git a/images/Shaft_01724.png b/images/Shaft_01724.png new file mode 100644 index 0000000000000000000000000000000000000000..5d581831502e7e61af5b3d53fa52801e7308d616 --- /dev/null +++ b/images/Shaft_01724.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07719715deab7a408c18166ef23bb09e1fcc2ee9d57f778b590d1e1740b3c505 +size 96912 diff --git a/images/Shaft_01725.png b/images/Shaft_01725.png new file mode 100644 index 0000000000000000000000000000000000000000..3127cbf22f21eaeaec6cae1c940333d1282221fe --- /dev/null +++ b/images/Shaft_01725.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4a3382897e702df7ebdfc21162674595c162532d9beaec307d2d99dff4ee6ea +size 80407 diff --git a/images/Shaft_01726.png b/images/Shaft_01726.png new file mode 100644 index 0000000000000000000000000000000000000000..8ca507d48638a399d26c9a536fa90352a7c75c92 --- /dev/null +++ b/images/Shaft_01726.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3aa2958605fec143703f47e430b491d939c1797e832ea65e5ae8f12ed1c7b6b8 +size 81040 diff --git a/images/Shaft_01727.png b/images/Shaft_01727.png new file mode 100644 index 0000000000000000000000000000000000000000..c43e521f0cafbcbf218cefec941640a4bada1dc4 --- /dev/null +++ b/images/Shaft_01727.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a104385c4e8d8cb767b9f75155fe4b6eef0f1afb0e867414d677e0ca38d2aaf2 +size 73431 diff --git a/images/Shaft_01728.png b/images/Shaft_01728.png new file mode 100644 index 0000000000000000000000000000000000000000..c461e96ed6ec74a21b676ebd1ab68c31d52e83be --- /dev/null +++ b/images/Shaft_01728.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb51e63305e6274a1d3178d26946d8f52467d7a1cc07849de4cb70df2c06f28a +size 91265 diff --git a/images/Shaft_01729.png b/images/Shaft_01729.png new file mode 100644 index 0000000000000000000000000000000000000000..7b4daafb8688cbcd38a7285209e7c34368ec56ae --- /dev/null +++ b/images/Shaft_01729.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:841879d8a614d3b3678dec42a4fb66619d1ceec211ad33883e2e66e58147caad +size 68428 diff --git a/images/Shaft_01730.png b/images/Shaft_01730.png new file mode 100644 index 0000000000000000000000000000000000000000..a623337c5c02f51a990d677290602eda0fb7df39 --- /dev/null +++ b/images/Shaft_01730.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e24e6ac378372cc7dd5b438ded7578d206acf517ad6dac745ac98e7368df76f +size 78181 diff --git a/images/Shaft_01731.png b/images/Shaft_01731.png new file mode 100644 index 0000000000000000000000000000000000000000..6f67512f24d2d1ea7194824f7c159530d16d0229 --- /dev/null +++ b/images/Shaft_01731.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83f564d7d0b6f1fd03a39e5627b597980326ec46a804ba0ef0dae272f1fdc8f3 +size 105351 diff --git a/images/Shaft_01732.png b/images/Shaft_01732.png new file mode 100644 index 0000000000000000000000000000000000000000..3461d67d9a999adb1bd581bcc3a4319d5acd665c --- /dev/null +++ b/images/Shaft_01732.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9e560e3b41469a6348fe9eabb404e3b3b1d642367ca6f4d792053150c7230c7 +size 103901 diff --git a/images/Shaft_01733.png b/images/Shaft_01733.png new file mode 100644 index 0000000000000000000000000000000000000000..35df983f028e05e42b5ad2604fb2ae5add7d9e65 --- /dev/null +++ b/images/Shaft_01733.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13ced0ae5beaf08af8083315d94292ea6686322e099467cf223d8204cbce9957 +size 97584 diff --git a/images/Shaft_01734.png b/images/Shaft_01734.png new file mode 100644 index 0000000000000000000000000000000000000000..c9805e7fbd32956a656501af931f0e7dc0d1cd2a --- /dev/null +++ b/images/Shaft_01734.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c7c19298822e5c278698ebfd4f58b14a7d188aac69b7164595d30df5d835e5e +size 104227 diff --git a/images/Shaft_01735.png b/images/Shaft_01735.png new file mode 100644 index 0000000000000000000000000000000000000000..d256bea95611d8f2321bc3227e1efbd42a2a3500 --- /dev/null +++ b/images/Shaft_01735.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a348680dcbf56e441feab2ccc0f71d9d72fe7e1e255cb38b54678e0759392c0 +size 85597 diff --git a/images/Shaft_01736.png b/images/Shaft_01736.png new file mode 100644 index 0000000000000000000000000000000000000000..6c0f36a9b98cf6f43314ec22e9b43285591bfa35 --- /dev/null +++ b/images/Shaft_01736.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d54db068deaf7c198be0539293876c3a52e75b598e332668b210eb46b78dc01a +size 79585 diff --git a/images/Shaft_01737.png b/images/Shaft_01737.png new file mode 100644 index 0000000000000000000000000000000000000000..63b5bf2ea617d273578062b45e06d0a46d76a406 --- /dev/null +++ b/images/Shaft_01737.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7ca8c3ec8447986bad4bd9c8d66ec6ddf7bdaf9213bfe5bd238c3b1bcc1683d +size 73979 diff --git a/images/Shaft_01738.png b/images/Shaft_01738.png new file mode 100644 index 0000000000000000000000000000000000000000..f38d5b9ea9c4202001cc055c94c144adcfd1f0fd --- /dev/null +++ b/images/Shaft_01738.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ccea3ea06b03d62842f22b5f68515cac45da6dde8c9d635229f60ace81d1b93 +size 69318 diff --git a/images/Shaft_01739.png b/images/Shaft_01739.png new file mode 100644 index 0000000000000000000000000000000000000000..faf88628c86b0007c90852e11ee3a527ca4c0710 --- /dev/null +++ b/images/Shaft_01739.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae740c8d85509d25a71488a275ea666225cd5a9ba8758005aa97f59602e72ac1 +size 70068 diff --git a/images/Shaft_01740.png b/images/Shaft_01740.png new file mode 100644 index 0000000000000000000000000000000000000000..80ea3355104cbbacdc42fb60e4b36b9aca3932d2 --- /dev/null +++ b/images/Shaft_01740.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6f1b003eff04d25ca8b055aee0b0367b8ee63f37782e60693c95627cd57a745 +size 70498 diff --git a/images/Shaft_01741.png b/images/Shaft_01741.png new file mode 100644 index 0000000000000000000000000000000000000000..6e4461ce4115e2ca82a6318f40992e457e4da302 --- /dev/null +++ b/images/Shaft_01741.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a05a3f88553bda837ea42eb33e6fabcf718f23a3da63a3ecbe840498619f15b0 +size 74887 diff --git a/images/Shaft_01742.png b/images/Shaft_01742.png new file mode 100644 index 0000000000000000000000000000000000000000..94407424d75059ff878f594f8bdeb60f2e9d5afb --- /dev/null +++ b/images/Shaft_01742.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59c9956f98cd945c677e893592ad00314c3edbdb0ad71a2301194dd8507e313a +size 72609 diff --git a/images/Shaft_01743.png b/images/Shaft_01743.png new file mode 100644 index 0000000000000000000000000000000000000000..5034a3737abd34b1b56ed1329d13fb054047e683 --- /dev/null +++ b/images/Shaft_01743.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d934face009d4fbe4be8852b1fd38c6603c0f2fda91c4980127725dcaef539c +size 90535 diff --git a/images/Shaft_01744.png b/images/Shaft_01744.png new file mode 100644 index 0000000000000000000000000000000000000000..14fda9d588131e016497264644644139acfb1fc9 --- /dev/null +++ b/images/Shaft_01744.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03692740a197a9bc5b8564fd2d49602324a4698735fa3c5dfc0166c731a2aa88 +size 101257 diff --git a/images/Shaft_01745.png b/images/Shaft_01745.png new file mode 100644 index 0000000000000000000000000000000000000000..142b929a4d000d987ca0255f1115abfa965efd68 --- /dev/null +++ b/images/Shaft_01745.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07a0825306281cd9c35847dc727e07ebfb833d2bdc6bb9fda18d5cf3a1c95fc4 +size 99106 diff --git a/images/Shaft_01746.png b/images/Shaft_01746.png new file mode 100644 index 0000000000000000000000000000000000000000..688006cc05601d95a42867508209a159fd1b0b22 --- /dev/null +++ b/images/Shaft_01746.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:145fb0627739de9275760f8945901d161f495f0012a50f2077f711afd0a72653 +size 73514 diff --git a/images/Shaft_01747.png b/images/Shaft_01747.png new file mode 100644 index 0000000000000000000000000000000000000000..818c3924d37078478103178c943915819c55da28 --- /dev/null +++ b/images/Shaft_01747.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20c684cc2eb62e68891b292c5220c5e04c9a5019a6393ee3626311bc03b616f8 +size 85853 diff --git a/images/Shaft_01748.png b/images/Shaft_01748.png new file mode 100644 index 0000000000000000000000000000000000000000..f85bdf69d53d3a6b3af54e782f454cefcd152565 --- /dev/null +++ b/images/Shaft_01748.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:158f89fb4e564a9a70b0f71cd3b3ab676b97493b368e7b83969f043d3d88285e +size 91873 diff --git a/images/Shaft_01749.png b/images/Shaft_01749.png new file mode 100644 index 0000000000000000000000000000000000000000..7676d0654b3eb78016a0169a36e348b3ebfceb74 --- /dev/null +++ b/images/Shaft_01749.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4d54fd8e106cf440e24f6198cc5f536ca5273b64979acf6d8bf9b2610af50fa +size 109937 diff --git a/images/Shaft_01750.png b/images/Shaft_01750.png new file mode 100644 index 0000000000000000000000000000000000000000..87eb7b8b26b4255c8bd786622d7b7b9960b812ff --- /dev/null +++ b/images/Shaft_01750.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10947a578073606b6212bd1afd83c2170ec7b6bf6d5715cba96c0a18fab2522d +size 102645 diff --git a/images/Shaft_01751.png b/images/Shaft_01751.png new file mode 100644 index 0000000000000000000000000000000000000000..df3edbc551fccc38a44be04326367829043e9de7 --- /dev/null +++ b/images/Shaft_01751.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0dde514a2009127f973ae6c1b5197e3bf36b6809958db5311f1795a42a381fa7 +size 89199 diff --git a/images/Shaft_01752.png b/images/Shaft_01752.png new file mode 100644 index 0000000000000000000000000000000000000000..4ae634482233c8cf6eccfd5743f702e8f7c82386 --- /dev/null +++ b/images/Shaft_01752.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cf441b9cbb6de4ac62cfeb37dd6141a5bae4e3bf6762f7940d85c62e918e431 +size 70979 diff --git a/images/Shaft_01753.png b/images/Shaft_01753.png new file mode 100644 index 0000000000000000000000000000000000000000..7488e7c094cc656252e2919f650db4e0fb00ef48 --- /dev/null +++ b/images/Shaft_01753.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b364167e54de2927937017fc3246511dadf303476f5e51f66be6beb74817e902 +size 90392 diff --git a/images/Shaft_01754.png b/images/Shaft_01754.png new file mode 100644 index 0000000000000000000000000000000000000000..b1a85fe6232287c5d4cdf85c78cf809cddf8b8ce --- /dev/null +++ b/images/Shaft_01754.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab50f11c79a67039d09621e58cbc5e93c892d9b69c02c2912b7ae592e96ecd80 +size 91494 diff --git a/images/Shaft_01755.png b/images/Shaft_01755.png new file mode 100644 index 0000000000000000000000000000000000000000..dc0098467f09231308bca186f9b74064d777122f --- /dev/null +++ b/images/Shaft_01755.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5793e538843c5c35e62e7453f69aa0c96aca1531240902511ca80265279ece12 +size 82242 diff --git a/images/Shaft_01756.png b/images/Shaft_01756.png new file mode 100644 index 0000000000000000000000000000000000000000..17c6d919fab5d745604c71f827d7297fa96974c4 --- /dev/null +++ b/images/Shaft_01756.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52f5a7173700ab886cfa8934789732c4be5eec0017d94bbe7b9c6a5e2475e1f1 +size 78716 diff --git a/images/Shaft_01757.png b/images/Shaft_01757.png new file mode 100644 index 0000000000000000000000000000000000000000..c826ae7b8392ddada44439d4d84ca2702c5e4b4d --- /dev/null +++ b/images/Shaft_01757.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0970a225c6a932d74abbebcae9511129e7387e9ff42061ef1e29dcd8041c905 +size 95485 diff --git a/images/Shaft_01758.png b/images/Shaft_01758.png new file mode 100644 index 0000000000000000000000000000000000000000..ac8d6a74fdca7aa52ceeb3d4dad55bf29cdcdb49 --- /dev/null +++ b/images/Shaft_01758.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af218ba846d11f086562e8ecbb2e38392c27b634077fad207e3dd60f5e1281ae +size 81372 diff --git a/images/Shaft_01759.png b/images/Shaft_01759.png new file mode 100644 index 0000000000000000000000000000000000000000..c7395f06556eb3bdbddbd2d7ca33c51619466733 --- /dev/null +++ b/images/Shaft_01759.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d8201872bf8fefd2063a8586150419a500db5b7a214eb23a2c1f1782764d7be +size 68795 diff --git a/images/Shaft_01760.png b/images/Shaft_01760.png new file mode 100644 index 0000000000000000000000000000000000000000..dc8a83cfa39582aca0144db59326070cc3c6af50 --- /dev/null +++ b/images/Shaft_01760.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73b198e401e452be3ecc7d5d9a7902a45add7e6827292e72e1c872e3f5e9fc35 +size 84758 diff --git a/images/Shaft_01761.png b/images/Shaft_01761.png new file mode 100644 index 0000000000000000000000000000000000000000..e9c631216bbd1ee2eeaa0766585eee5116a28e6e --- /dev/null +++ b/images/Shaft_01761.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5b52c4a1ee83aa3f7ae8066d138254e177a06731a3627475dc06ea725416cff +size 108803 diff --git a/images/Shaft_01762.png b/images/Shaft_01762.png new file mode 100644 index 0000000000000000000000000000000000000000..e98b56cc1a0bfa442132c312050530070ca637b5 --- /dev/null +++ b/images/Shaft_01762.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1bfbc6e613a740c76eaeecfe7158b537bbf22bd8557c8592add685501461a73 +size 109097 diff --git a/images/Shaft_01763.png b/images/Shaft_01763.png new file mode 100644 index 0000000000000000000000000000000000000000..d8e3db40a3be63c7e4cf769d335fa2ed93cfd910 --- /dev/null +++ b/images/Shaft_01763.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e886ca83ee5a5fe513346543071f30ab8d2df61a7bc309935b9a94237b46972 +size 85416 diff --git a/images/Shaft_01764.png b/images/Shaft_01764.png new file mode 100644 index 0000000000000000000000000000000000000000..9bec396f06bab1de511ab4b4691f91144ca80333 --- /dev/null +++ b/images/Shaft_01764.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eba2cbfb35ae29ef3e1a31bf99676852d7b11714e87d180f361309d4bad4ed2a +size 96034 diff --git a/images/Shaft_01765.png b/images/Shaft_01765.png new file mode 100644 index 0000000000000000000000000000000000000000..e8090f3507fdf442aaaaed488c75aefb3caebea9 --- /dev/null +++ b/images/Shaft_01765.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2dae22ae9f66ff02c07dc55100f2e4dd75c39c947a62abaa73e03b0b19f21849 +size 73372 diff --git a/images/Shaft_01766.png b/images/Shaft_01766.png new file mode 100644 index 0000000000000000000000000000000000000000..059bccd2af27b02cff98784ff8586d3b7e9aeff7 --- /dev/null +++ b/images/Shaft_01766.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:558e1d49ed493cffa0a8666363e3ca1aad17fffc40a74f9404f8219de9506fa7 +size 79597 diff --git a/images/Shaft_01767.png b/images/Shaft_01767.png new file mode 100644 index 0000000000000000000000000000000000000000..8b7b9caef26a235f2ca5ec5dac861baf87bce4d5 --- /dev/null +++ b/images/Shaft_01767.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1468f4dcd862a7917a5d1db36cca3a2a7d72dd04ed34f7a1cc716453df3c725 +size 73511 diff --git a/images/Shaft_01768.png b/images/Shaft_01768.png new file mode 100644 index 0000000000000000000000000000000000000000..f645711cb4ffb091ec518833e697e8fe9a83f1ad --- /dev/null +++ b/images/Shaft_01768.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:427249ad8d91eaaa5eb329c4e32853aa25f33a02dd8881a9b8572e3a357d5fd5 +size 90601 diff --git a/images/Shaft_01769.png b/images/Shaft_01769.png new file mode 100644 index 0000000000000000000000000000000000000000..cd4eb27ce89b4404007f0a200ce1f42a56e29622 --- /dev/null +++ b/images/Shaft_01769.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:501ca747dfe8d2c8e95cce7bd9d94b55312f1864b6eb0e2d1c49deac211fc623 +size 102889 diff --git a/images/Shaft_01770.png b/images/Shaft_01770.png new file mode 100644 index 0000000000000000000000000000000000000000..bc7c45caf1ba83f8ffce2c12b9925a7923745e7d --- /dev/null +++ b/images/Shaft_01770.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfe036a8cf19dec12fab496b5f1c88b4caa90304716d9f1508297b6c03dcd8fa +size 94936 diff --git a/images/Shaft_01771.png b/images/Shaft_01771.png new file mode 100644 index 0000000000000000000000000000000000000000..d4e54b6bcb42ca86ad3c50ec6e0b8bf6df38858d --- /dev/null +++ b/images/Shaft_01771.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:703f19b126b46f3a63e9be1f67b32ab73bffbf6a9d93023fb8f9bdbce5926935 +size 89857 diff --git a/images/Shaft_01772.png b/images/Shaft_01772.png new file mode 100644 index 0000000000000000000000000000000000000000..796670dd8d3f3f43f5c9a4b066f522ccaeb95177 --- /dev/null +++ b/images/Shaft_01772.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9a6eab123b77cca5be2d18e7c545ac4452966162d069a49d9099e1a9480aa15 +size 71788 diff --git a/images/Shaft_01773.png b/images/Shaft_01773.png new file mode 100644 index 0000000000000000000000000000000000000000..e48444e57b37791487c112961482932019193930 --- /dev/null +++ b/images/Shaft_01773.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:963db963cc12d8557a75f4034c2c2bc57fcf75dab07349395ac8be91d9c59d61 +size 78049 diff --git a/images/Shaft_01774.png b/images/Shaft_01774.png new file mode 100644 index 0000000000000000000000000000000000000000..76de871438a2caa90c882ee28afc78cefdd1c98b --- /dev/null +++ b/images/Shaft_01774.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3af70aac24d53216d0ded08debec0712d7c165c249750a5293a11448ea7e828 +size 92633 diff --git a/images/Shaft_01775.png b/images/Shaft_01775.png new file mode 100644 index 0000000000000000000000000000000000000000..b47a3b7e2c27265f112f4e6d912f439e12578bac --- /dev/null +++ b/images/Shaft_01775.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5c86b6535182a9352646c9ce85c6b8b80704b99eb7cd7b9b037796e99ba63e6 +size 93595 diff --git a/images/Shaft_01776.png b/images/Shaft_01776.png new file mode 100644 index 0000000000000000000000000000000000000000..157cce19607b94b7033c74349419cedbe9e8498c --- /dev/null +++ b/images/Shaft_01776.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f264be74700f7d158af36cd29cded42e1febfd12da0103a0cf5df4eec2cce42e +size 71756 diff --git a/images/Shaft_01777.png b/images/Shaft_01777.png new file mode 100644 index 0000000000000000000000000000000000000000..6beb8de1018b56fec9587f62000b3ca02e708ee5 --- /dev/null +++ b/images/Shaft_01777.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80f720ce8a8e43644ad1e770688f639b2015eaaac5abf69efa83b767d661ad0c +size 68099 diff --git a/images/Shaft_01778.png b/images/Shaft_01778.png new file mode 100644 index 0000000000000000000000000000000000000000..63b0e9c304d9177e6ffed261e81d98bfec32a21e --- /dev/null +++ b/images/Shaft_01778.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec7175d07c43c8ca958fa308499e775bd6d54a920d2ca986194a4fa2820b122b +size 95163 diff --git a/images/Shaft_01779.png b/images/Shaft_01779.png new file mode 100644 index 0000000000000000000000000000000000000000..e994fe5bd99b7ad58830c52da095d847863a9fc5 --- /dev/null +++ b/images/Shaft_01779.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf78117ab0a53bafe3366af56149c85d7bc0fd306b22535b194e3c8fed87c41e +size 110036 diff --git a/images/Shaft_01780.png b/images/Shaft_01780.png new file mode 100644 index 0000000000000000000000000000000000000000..0cce0f92ec0fd6a9e921e0baf213bc76dc0cdc9b --- /dev/null +++ b/images/Shaft_01780.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ea4baae6a3676dc2c5dc6e2f5f7263975934119fe0a6d04641602557453156d +size 81106 diff --git a/images/Shaft_01781.png b/images/Shaft_01781.png new file mode 100644 index 0000000000000000000000000000000000000000..cad3db45d19b9e4f5914b687adde3c36a2ae079f --- /dev/null +++ b/images/Shaft_01781.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85502d8e01f40ee9079f34c42e278d899360e46bb67a1ec9b0745097669d72d9 +size 91568 diff --git a/images/Shaft_01782.png b/images/Shaft_01782.png new file mode 100644 index 0000000000000000000000000000000000000000..9c49ae91a41598131d3ea2b8eaa56a33fb260726 --- /dev/null +++ b/images/Shaft_01782.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48b95ce287f837e94fba0e4a87174804272cdd639a4dcdb94da03213a6742414 +size 69732 diff --git a/images/Shaft_01783.png b/images/Shaft_01783.png new file mode 100644 index 0000000000000000000000000000000000000000..9f4db21faae9c68ac4b8c6918e005743d9be7263 --- /dev/null +++ b/images/Shaft_01783.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1d11bb3fb49577f862a01aa196e82e66ad0390836ea5594848d090186120cf9 +size 85527 diff --git a/images/Shaft_01784.png b/images/Shaft_01784.png new file mode 100644 index 0000000000000000000000000000000000000000..4f5ab9192e69850de11d9982c19b8b49c4fdf113 --- /dev/null +++ b/images/Shaft_01784.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6535601e4601411d72bdbb252975654cde061afebbe569a211709a91d516031 +size 90451 diff --git a/images/Shaft_01785.png b/images/Shaft_01785.png new file mode 100644 index 0000000000000000000000000000000000000000..7fd0aa624aee46439adeb5e828f261154a092dea --- /dev/null +++ b/images/Shaft_01785.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb17f58f7b035b6b592b75ab78a5076543617df99c65f627a413d255374b2573 +size 102873 diff --git a/images/Shaft_01786.png b/images/Shaft_01786.png new file mode 100644 index 0000000000000000000000000000000000000000..3fb4c1a490595ecdc959c7c06eb2df557985dcaa --- /dev/null +++ b/images/Shaft_01786.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be93059d4ae16866ea6eb8df95ffeac023819974d93d2e1f95ffe682b43a19d7 +size 103205 diff --git a/images/Shaft_01787.png b/images/Shaft_01787.png new file mode 100644 index 0000000000000000000000000000000000000000..7089645f3f37c977accc7313c43d0c035718edb2 --- /dev/null +++ b/images/Shaft_01787.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72ea778ad265f9e59c3657c3d0387c9f0f0bb710254b4bfb621732a130a90dcf +size 85397 diff --git a/images/Shaft_01788.png b/images/Shaft_01788.png new file mode 100644 index 0000000000000000000000000000000000000000..1f97038ec9950415777fc42a8eeabb564ca1080c --- /dev/null +++ b/images/Shaft_01788.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49608c60f2c3a9870dbc58791af051f5b2690b0c4025a005a8e117a219670ed8 +size 89729 diff --git a/images/Shaft_01789.png b/images/Shaft_01789.png new file mode 100644 index 0000000000000000000000000000000000000000..e158cf43c12b8321a3248021789e3596f20a37e8 --- /dev/null +++ b/images/Shaft_01789.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b00501bf2d352884b85cf45e402573cc5b3e634c61b4516bc0f0bb7c8d8f1b3d +size 75669 diff --git a/images/Shaft_01790.png b/images/Shaft_01790.png new file mode 100644 index 0000000000000000000000000000000000000000..7e0c629b09fd0ed0a6cb2cf4b5bcd28b0f75eada --- /dev/null +++ b/images/Shaft_01790.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d96208c8ecbc9decf4874e55d8f82786017f60960cb3495d29ec453d0b64a474 +size 84131 diff --git a/images/Shaft_01791.png b/images/Shaft_01791.png new file mode 100644 index 0000000000000000000000000000000000000000..aa9e92d3f864cea01958d09a729ac0613c220d49 --- /dev/null +++ b/images/Shaft_01791.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c043193993692d5b55b3174424a8da5d1eedb4bdba5085c2b8af4aea23c821d +size 109943 diff --git a/images/Shaft_01792.png b/images/Shaft_01792.png new file mode 100644 index 0000000000000000000000000000000000000000..8d91c0c52ed1fab0aa9fc8104242ffe361173b7e --- /dev/null +++ b/images/Shaft_01792.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a6b7cb961fb4e2c84511167f1ad38efaac33b8c330307d9de964e1f39869d90 +size 94788 diff --git a/images/Shaft_01793.png b/images/Shaft_01793.png new file mode 100644 index 0000000000000000000000000000000000000000..dad38917b1bf4eade126017790a84bb9c28149ca --- /dev/null +++ b/images/Shaft_01793.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85edc32d1c3d0f91ffff738e51db066b2e806a12928c9bd0c7d7d03e00ab929a +size 81857 diff --git a/images/Shaft_01794.png b/images/Shaft_01794.png new file mode 100644 index 0000000000000000000000000000000000000000..6fda9ee94fa6e6aeb5fb6113481dceaa55dd5c6e --- /dev/null +++ b/images/Shaft_01794.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b7808a65ff7acadf1163e93ddc3fca88fdfa2fab6ef1ba641226c3a341da32e +size 72846 diff --git a/images/Shaft_01795.png b/images/Shaft_01795.png new file mode 100644 index 0000000000000000000000000000000000000000..602f53dd59998b3d3a9bedc3e61174540aee75da --- /dev/null +++ b/images/Shaft_01795.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29346079b8e9d56e4fe6f9010ff2d7879da5bd90883ecf5d89a455d5686c14ad +size 80567 diff --git a/images/Shaft_01796.png b/images/Shaft_01796.png new file mode 100644 index 0000000000000000000000000000000000000000..d5edbdc5024605ac1a63b36b97f799fcbf84aa95 --- /dev/null +++ b/images/Shaft_01796.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c39381eb641cd4cfd42efcc2a9738a719593cb0e575eb4d220ec65f233381ea +size 104962 diff --git a/images/Shaft_01797.png b/images/Shaft_01797.png new file mode 100644 index 0000000000000000000000000000000000000000..c725f8afaa5920aeac5ec743d728b96a15a964e8 --- /dev/null +++ b/images/Shaft_01797.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c029385802caa8545f0bcfb4090f3c6aba3f931367e683ce69e5df5fba3d9cb +size 77773 diff --git a/images/Shaft_01798.png b/images/Shaft_01798.png new file mode 100644 index 0000000000000000000000000000000000000000..c14aa105004cf35c11ada8f1f2fb7d2a502a49d6 --- /dev/null +++ b/images/Shaft_01798.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11e69c3fb83d3c2545bea68f5c8cb81ce61f4871cd16a011e1bada8e77aae986 +size 91836 diff --git a/images/Shaft_01799.png b/images/Shaft_01799.png new file mode 100644 index 0000000000000000000000000000000000000000..15de834e9511d607da6d0689853151e8d1c6d773 --- /dev/null +++ b/images/Shaft_01799.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b03ac6b31bbe466a3e76e03904fd384f6e8dc1a3ed8efe25c421293c5737fbd +size 112465 diff --git a/images/Shaft_01800.png b/images/Shaft_01800.png new file mode 100644 index 0000000000000000000000000000000000000000..4e99a8a77fd14844f391657bf465c324dfe05bfd --- /dev/null +++ b/images/Shaft_01800.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecde0642dfbf292c15ef632079c746fc55b38c94e28728326392396ed68f54cc +size 79499 diff --git a/images/Shaft_01801.png b/images/Shaft_01801.png new file mode 100644 index 0000000000000000000000000000000000000000..26d699dbfb7a26dc7f8fa414df6955308d8689f9 --- /dev/null +++ b/images/Shaft_01801.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13281946b54cb729bce6595eda996f4ea96d467b575036ec7ca92f842ca5d64c +size 93732 diff --git a/images/Shaft_01802.png b/images/Shaft_01802.png new file mode 100644 index 0000000000000000000000000000000000000000..23751170b82e7aca0b088b1b89df51fb0f46427a --- /dev/null +++ b/images/Shaft_01802.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:483c7737b6681a96642305f0c5efa69a55a516345fb006b0e4f2c9906e144096 +size 86404 diff --git a/images/Shaft_01803.png b/images/Shaft_01803.png new file mode 100644 index 0000000000000000000000000000000000000000..83b9a10d9d8ec307862d8dc08c6c40b061d5d9b0 --- /dev/null +++ b/images/Shaft_01803.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cc8e56f2a2f21aaa249aad47afa9dcbea25d19ed7833ff0112f33d3cdb3f114 +size 72635 diff --git a/images/Shaft_01804.png b/images/Shaft_01804.png new file mode 100644 index 0000000000000000000000000000000000000000..cf6aaeaf90f876a95b8768c79090262267e3c5da --- /dev/null +++ b/images/Shaft_01804.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:722321659e37dfa54172b51edf26b5c6453425471e585a6a3edc98f6be4624c5 +size 69212 diff --git a/images/Shaft_01805.png b/images/Shaft_01805.png new file mode 100644 index 0000000000000000000000000000000000000000..351a939bd710ad178132248fbd5265c7463cf3fd --- /dev/null +++ b/images/Shaft_01805.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c81cd1596bc55bcc98db92fb6252f585315a3ffa7469dd18807509e5e7b4597 +size 94552 diff --git a/images/Shaft_01806.png b/images/Shaft_01806.png new file mode 100644 index 0000000000000000000000000000000000000000..e6a86404b6a3008a5d5d726db7082701e65e3e6a --- /dev/null +++ b/images/Shaft_01806.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7852cbdb4403def2196f6e1da16d654a56370c4207959b55bb5b7edd28ff2580 +size 98736 diff --git a/images/Shaft_01807.png b/images/Shaft_01807.png new file mode 100644 index 0000000000000000000000000000000000000000..64d083d430fc792b82439dd448d92c3395e0bc55 --- /dev/null +++ b/images/Shaft_01807.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad927cb1151b8947f9d9a7ad1b87f2a4f03a0782ec205af29b540c3d860d9e15 +size 80896 diff --git a/images/Shaft_01808.png b/images/Shaft_01808.png new file mode 100644 index 0000000000000000000000000000000000000000..04eb66eef53fe650a4053b63ae065989674cd6f4 --- /dev/null +++ b/images/Shaft_01808.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c97180b7a5e92460760cd2d48a5fd3b72fa1400b989ff93e75e97c9cb72c36d6 +size 109471 diff --git a/images/Shaft_01809.png b/images/Shaft_01809.png new file mode 100644 index 0000000000000000000000000000000000000000..64cef291c658d1e89a3b69e3b4f48800473ad84e --- /dev/null +++ b/images/Shaft_01809.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4da932aeb5d719a9430aa1a3af9d3b1ea51d794b70dd4db9e35225f5094f75df +size 73143 diff --git a/images/Shaft_01810.png b/images/Shaft_01810.png new file mode 100644 index 0000000000000000000000000000000000000000..f12f5870ed4f84e6851866ea19bc48b292e6e033 --- /dev/null +++ b/images/Shaft_01810.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51afad3410b7819b093a0165dc353b939a702f1d0b7891413ba6342346a71b5b +size 87382 diff --git a/images/Shaft_01811.png b/images/Shaft_01811.png new file mode 100644 index 0000000000000000000000000000000000000000..6e617da245713eae99447753a5e9ab5dcc8ccfac --- /dev/null +++ b/images/Shaft_01811.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86e4c141976ae46fd9a5560b1bc17fed1d74c1e615767ab61b06c333e971f86b +size 77332 diff --git a/images/Shaft_01812.png b/images/Shaft_01812.png new file mode 100644 index 0000000000000000000000000000000000000000..0e38cdbc00b9fd8b0e8d8778668fc290281917e7 --- /dev/null +++ b/images/Shaft_01812.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d0c3c9ab1083b2dd32073fb2d024c6b7157df14a44e585a69f7ef01338736ff +size 82744 diff --git a/images/Shaft_01813.png b/images/Shaft_01813.png new file mode 100644 index 0000000000000000000000000000000000000000..7fad5463c0469f3e61abbdcb54af0d5242c430ce --- /dev/null +++ b/images/Shaft_01813.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2432ff48e0b9109cfc909eefb486e1802c65136c5ed850296772c24203a4575 +size 73163 diff --git a/images/Shaft_01814.png b/images/Shaft_01814.png new file mode 100644 index 0000000000000000000000000000000000000000..ce89438bc6b9d5217a54fbbc0a1bb0f6902a4ca7 --- /dev/null +++ b/images/Shaft_01814.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dbd4447afa8a83c14c24bcff28f88b71077f028d6956077bf0d84254b83b446 +size 93388 diff --git a/images/Shaft_01815.png b/images/Shaft_01815.png new file mode 100644 index 0000000000000000000000000000000000000000..207616a3eddb584139a576114bb9c78c1f37e698 --- /dev/null +++ b/images/Shaft_01815.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd0d1d6dcad77a4a4af9a49e442d61aa0ec6e0303ffe9f0bc666723e39b5821e +size 80731 diff --git a/images/Shaft_01816.png b/images/Shaft_01816.png new file mode 100644 index 0000000000000000000000000000000000000000..0974ef48b59b87d6a992dbf8625dd50284858d56 --- /dev/null +++ b/images/Shaft_01816.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ecaa24ce88239d361f5d2424650db9b88a402951502c0c74aacd7ed71871edc +size 89817 diff --git a/images/Shaft_01817.png b/images/Shaft_01817.png new file mode 100644 index 0000000000000000000000000000000000000000..589eb4e05e9c17af2212eb3e04b1e779684e617f --- /dev/null +++ b/images/Shaft_01817.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4753a701ba5c9c6299ba269b7fa62cf6dec0f6f0ecd6be5ae507ff5724f92482 +size 72081 diff --git a/images/Shaft_01818.png b/images/Shaft_01818.png new file mode 100644 index 0000000000000000000000000000000000000000..0f4279f3b7cfc81904545d45e2ee0d29f275ebe9 --- /dev/null +++ b/images/Shaft_01818.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63fc792a7961857d8d4c4e4026b5debcc378f11074d2c3ed533d50eb8841810d +size 82888 diff --git a/images/Shaft_01819.png b/images/Shaft_01819.png new file mode 100644 index 0000000000000000000000000000000000000000..0e6e43878d244d717076b6fc9fea95592508056d --- /dev/null +++ b/images/Shaft_01819.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:526a59ac8cd22fd908014197b628a700676f78b639827402178959f877500fa1 +size 89045 diff --git a/images/Shaft_01820.png b/images/Shaft_01820.png new file mode 100644 index 0000000000000000000000000000000000000000..9ffcfe1a5d4ee9979e8fea65bd146e2988de8b11 --- /dev/null +++ b/images/Shaft_01820.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f1bd65abe5ee2f8ee0a1d2bef31c2e9ea00e63c571092c9a02e7d11b0afad77 +size 77702 diff --git a/images/Shaft_01821.png b/images/Shaft_01821.png new file mode 100644 index 0000000000000000000000000000000000000000..809a1d3bbf2cdca6cef8efd5af405f5b7d81beb3 --- /dev/null +++ b/images/Shaft_01821.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8b24808d36eb4b78b8fe8e979ac9529dce886b219943ae88dc8cb08784ecf8b +size 94376 diff --git a/images/Shaft_01822.png b/images/Shaft_01822.png new file mode 100644 index 0000000000000000000000000000000000000000..16945cbd911fda52373ceab674c1d1f44df4a575 --- /dev/null +++ b/images/Shaft_01822.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59d1c7d6b2672020841977ad434ba2f7371081478e697d3c866ea561a04401cb +size 69539 diff --git a/images/Shaft_01823.png b/images/Shaft_01823.png new file mode 100644 index 0000000000000000000000000000000000000000..b2d0dfa15d577727870f46a91a8614f574a706b4 --- /dev/null +++ b/images/Shaft_01823.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d6ab086c10728385a5b4d90da38a35715543231edcb50094d1a7c13b49aaf81 +size 70310 diff --git a/images/Shaft_01824.png b/images/Shaft_01824.png new file mode 100644 index 0000000000000000000000000000000000000000..28b302906f31c2008a3a1b878f9ff4bfb2bf22bf --- /dev/null +++ b/images/Shaft_01824.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8bd68bac8ec00418903f57a05aef6ab36a8e71a5b2f94b52547f88c13c86059 +size 88606 diff --git a/images/Shaft_01825.png b/images/Shaft_01825.png new file mode 100644 index 0000000000000000000000000000000000000000..8443e4dcaed2d3117c58af88f9196250b9b68c3b --- /dev/null +++ b/images/Shaft_01825.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e5bf3c2773be706b95e784955b26369a8a108d348b637d3efa1f352fcbadd22 +size 76105 diff --git a/images/Shaft_01826.png b/images/Shaft_01826.png new file mode 100644 index 0000000000000000000000000000000000000000..76c1deb417aeeb0ff4261cb6040704ca692fba28 --- /dev/null +++ b/images/Shaft_01826.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb322a302c70e5290ebb728054d4518edb29a0df3732dd8a52215c4df6cdefb6 +size 81006 diff --git a/images/Shaft_01827.png b/images/Shaft_01827.png new file mode 100644 index 0000000000000000000000000000000000000000..2a16b08610e973cc0c3e6c7e1419e04482a6143c --- /dev/null +++ b/images/Shaft_01827.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e8c79102f020994b18d659f3b8d13334e593a7a7624c4ba53f2f54fcf46933d +size 99655 diff --git a/images/Shaft_01828.png b/images/Shaft_01828.png new file mode 100644 index 0000000000000000000000000000000000000000..a3c6c46b736c015887a75116d248b034325dbce7 --- /dev/null +++ b/images/Shaft_01828.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8bd7fe6dbee6e3d4926ef48553f313b4cae36ab84a6e50e4298e29b5a4869f6 +size 73279 diff --git a/images/Shaft_01829.png b/images/Shaft_01829.png new file mode 100644 index 0000000000000000000000000000000000000000..d3bc0bcb137b63ad759118e572366076698c2396 --- /dev/null +++ b/images/Shaft_01829.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d327f29dad97bd800794e2b31a2cbf84977ca4e0e8275dc4aebfe9d0c475a8c9 +size 77644 diff --git a/images/Shaft_01830.png b/images/Shaft_01830.png new file mode 100644 index 0000000000000000000000000000000000000000..d5d7726fdd98c28114c1fb5ac65fd4789197e81b --- /dev/null +++ b/images/Shaft_01830.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0978c9f611fec37a550f5c4f5d1d9d946b446fd8f1b8ca8d797810c56c1160aa +size 78635 diff --git a/images/Shaft_01831.png b/images/Shaft_01831.png new file mode 100644 index 0000000000000000000000000000000000000000..3101ab08c51529e6a5815d03a0c2402825cf936a --- /dev/null +++ b/images/Shaft_01831.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32877663d7c641a7ae13a6678e54fdf8de70c4eaa1e6d790b22ffb2a1f16bb08 +size 87111 diff --git a/images/Shaft_01832.png b/images/Shaft_01832.png new file mode 100644 index 0000000000000000000000000000000000000000..7ab9f3c15949782dbc684512fd23006d96af09b2 --- /dev/null +++ b/images/Shaft_01832.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29552d088fb796bee38afc002847f6265cab350afaf912f8f586aebfb8ca45b0 +size 77391 diff --git a/images/Shaft_01833.png b/images/Shaft_01833.png new file mode 100644 index 0000000000000000000000000000000000000000..8f3ef38ca86685ceb67b566477f156d144df60b4 --- /dev/null +++ b/images/Shaft_01833.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a749572a94e59a1195a91cb896e7a947d9554d1b66b5f2e23445aa2cfe0fa69 +size 110319 diff --git a/images/Shaft_01834.png b/images/Shaft_01834.png new file mode 100644 index 0000000000000000000000000000000000000000..7620a13731b1c1cb71939cd9516ecce2f7adb800 --- /dev/null +++ b/images/Shaft_01834.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a0578eed4afb043e4aa61b08fad027edefa692d9244e8f3e5f52bdbef1dc679 +size 88060 diff --git a/images/Shaft_01835.png b/images/Shaft_01835.png new file mode 100644 index 0000000000000000000000000000000000000000..6b686653a459bb446644a45c5e9a433a024a9fd7 --- /dev/null +++ b/images/Shaft_01835.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:716ef83274891803185b62be9961d29a545a64624cff84bd95127ac44a61c15c +size 118922 diff --git a/images/Shaft_01836.png b/images/Shaft_01836.png new file mode 100644 index 0000000000000000000000000000000000000000..f437798d902ce7e173420461df08b973e6df6652 --- /dev/null +++ b/images/Shaft_01836.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64f32d0efe7724df3d7611f573d03b93e0031a924042f2ab3fd9a68a491392ee +size 83046 diff --git a/images/Shaft_01837.png b/images/Shaft_01837.png new file mode 100644 index 0000000000000000000000000000000000000000..7f555aff00d997c26abd3b0ddd50c2d1d352bd1c --- /dev/null +++ b/images/Shaft_01837.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bcc3f23909e8cc26f4ebd2082f8ca8f620b9b1eb6a5491464dba75b37f4b121 +size 87958 diff --git a/images/Shaft_01838.png b/images/Shaft_01838.png new file mode 100644 index 0000000000000000000000000000000000000000..6e2094498de09661ed2461de8d8d93c8b1755353 --- /dev/null +++ b/images/Shaft_01838.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dc54e78dad8fb61d291d68734375caadb3fecc07e19281dc4eeae649014cad8 +size 99679 diff --git a/images/Shaft_01839.png b/images/Shaft_01839.png new file mode 100644 index 0000000000000000000000000000000000000000..1eced873bcb5067bfb1d497a4910e2a9d63ce02f --- /dev/null +++ b/images/Shaft_01839.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fd4255f3167068bc5efca0a34fd939447a7716af2d2827d501c92f330ab2118 +size 75725 diff --git a/images/Shaft_01840.png b/images/Shaft_01840.png new file mode 100644 index 0000000000000000000000000000000000000000..2e90e313a9342cbe4e3c2f0a34053e4d5e4decfb --- /dev/null +++ b/images/Shaft_01840.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5af7dff31f9d185afd3660736e80cb76f28bde6c1242a50c315423a90c4e481c +size 83449 diff --git a/images/Shaft_01841.png b/images/Shaft_01841.png new file mode 100644 index 0000000000000000000000000000000000000000..a5c1825960bb0413af5e1dddea358c31f83b9f2f --- /dev/null +++ b/images/Shaft_01841.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39e5c1c58abe0e5600f069fb4b685221d9cd9c502201480a6c4325dff80d88b4 +size 86931 diff --git a/images/Shaft_01842.png b/images/Shaft_01842.png new file mode 100644 index 0000000000000000000000000000000000000000..f4cefb62975d9fc9e9b44de3448f6eeed62eaeb9 --- /dev/null +++ b/images/Shaft_01842.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcc85075701b573df1a86ce1e42f8230a598447877d66023b6adfdf5d445f7b2 +size 100063 diff --git a/images/Shaft_01843.png b/images/Shaft_01843.png new file mode 100644 index 0000000000000000000000000000000000000000..212f23da5674c11f38ff47894943adbc25ab372b --- /dev/null +++ b/images/Shaft_01843.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f22dae580de7e29532a75c6984f54c04dd11ea03bc661963dcca8dbdbdd6e5f3 +size 69378 diff --git a/images/Shaft_01844.png b/images/Shaft_01844.png new file mode 100644 index 0000000000000000000000000000000000000000..424a16866ab3272e38b0edc970358fc4ffd8784d --- /dev/null +++ b/images/Shaft_01844.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:788a69953630fcb4790c5000057d8e7f418cbb8bb2bcd395904a23ecccfd3769 +size 73004 diff --git a/images/Shaft_01845.png b/images/Shaft_01845.png new file mode 100644 index 0000000000000000000000000000000000000000..142a3fe5402d72136fc4aa2b765488ab16c3b949 --- /dev/null +++ b/images/Shaft_01845.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7713e2aafa0efdaf0f30bb62cc52f0439020ae6a130b5473a14cf2d9f0fcd750 +size 68226 diff --git a/images/Shaft_01846.png b/images/Shaft_01846.png new file mode 100644 index 0000000000000000000000000000000000000000..dc476bdb564aa1eb33e2f7ae6d8b9dfb079d1e62 --- /dev/null +++ b/images/Shaft_01846.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d79834cb836e6a0b5cbd4d3de4106ef621050c643f4bd6eaafb652418028d46a +size 100915 diff --git a/images/Shaft_01847.png b/images/Shaft_01847.png new file mode 100644 index 0000000000000000000000000000000000000000..a4f0af4f72fff7b564a01771ba59149bd2a35dff --- /dev/null +++ b/images/Shaft_01847.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76ae4dee196744f970b6c558ba30ef55b9d254fff3de08576f146d1d3b64a16e +size 71470 diff --git a/images/Shaft_01848.png b/images/Shaft_01848.png new file mode 100644 index 0000000000000000000000000000000000000000..3bc5ce846f54ae1d7631b6a8f47ea06717b66ebe --- /dev/null +++ b/images/Shaft_01848.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7eec9fb83aa444c9952a8c43ce4759da59e45d165a39513b9a5267da63699702 +size 85170 diff --git a/images/Shaft_01849.png b/images/Shaft_01849.png new file mode 100644 index 0000000000000000000000000000000000000000..b7241d1b7dd485ec35518d9d89609945dd095de1 --- /dev/null +++ b/images/Shaft_01849.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d971f138ad758e633d8d018ec0084cd4895d9030be724471782b5e2491844eb1 +size 105007 diff --git a/images/Shaft_01850.png b/images/Shaft_01850.png new file mode 100644 index 0000000000000000000000000000000000000000..54325c737ad04a8346a52bfe96773c1fc8a154da --- /dev/null +++ b/images/Shaft_01850.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff7d9ef1223fb590bd5d87748eda1937b1590ab6d673421c381e298c53ebee02 +size 73386 diff --git a/images/Shaft_01851.png b/images/Shaft_01851.png new file mode 100644 index 0000000000000000000000000000000000000000..0aefad5bc339fcc16677d1dc11ce893570bbdee9 --- /dev/null +++ b/images/Shaft_01851.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:005743fdf100795ea1ac94883132b18af1988f5cd0b2a0377ab8831d468e3d43 +size 81931 diff --git a/images/Shaft_01852.png b/images/Shaft_01852.png new file mode 100644 index 0000000000000000000000000000000000000000..f26db941fac152d2e20cbd01b4725ac4ed4d8848 --- /dev/null +++ b/images/Shaft_01852.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79bd89d66453c0b72d0bf36100d29e4426dc2943b5278896972791746d34b6ed +size 98410 diff --git a/images/Shaft_01853.png b/images/Shaft_01853.png new file mode 100644 index 0000000000000000000000000000000000000000..71877ea158df184b7545cdfe1d775cb8f0099fb2 --- /dev/null +++ b/images/Shaft_01853.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7874316ec3e38c86aecf62f1fdae584990fa5b35a5da49e0ab1c630d4cecd03 +size 87633 diff --git a/images/Shaft_01854.png b/images/Shaft_01854.png new file mode 100644 index 0000000000000000000000000000000000000000..d5b5e8845e49bd0984302b4f1119b6bc6fc514a4 --- /dev/null +++ b/images/Shaft_01854.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc5911748c02b59b162bcfc1a759bc8f3a6e68a3283a6883c225ab0bdd1d276f +size 92902 diff --git a/images/Shaft_01855.png b/images/Shaft_01855.png new file mode 100644 index 0000000000000000000000000000000000000000..f1e25721803743722bf7cee65f0750ff2e87d689 --- /dev/null +++ b/images/Shaft_01855.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a20142c2e309c53507404a7fc5bb90ec204ef3debeda77f629afb33edc411324 +size 82847 diff --git a/images/Shaft_01856.png b/images/Shaft_01856.png new file mode 100644 index 0000000000000000000000000000000000000000..1fc1dceb019ee512d468fca106114306a53ddd6c --- /dev/null +++ b/images/Shaft_01856.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a23b4eaefa4b2cb14940b80e1ced42ef58f16535f3acc26b876eb69010c2956a +size 71431 diff --git a/images/Shaft_01857.png b/images/Shaft_01857.png new file mode 100644 index 0000000000000000000000000000000000000000..88fc0561c5f1335374817e8b8752cdc52319a42a --- /dev/null +++ b/images/Shaft_01857.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd3f1cc3ab06ddce3dd4f57febdcdd821d7848f3e6f301b5c170e67a079c5bb2 +size 88123 diff --git a/images/Shaft_01858.png b/images/Shaft_01858.png new file mode 100644 index 0000000000000000000000000000000000000000..09682beb63433b9433725f102cf742a44450d1c0 --- /dev/null +++ b/images/Shaft_01858.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:370300a62290cac8f168fcd819e111b21a09d1feb6d3349e68f746e831fb2c0a +size 77303 diff --git a/images/Shaft_01859.png b/images/Shaft_01859.png new file mode 100644 index 0000000000000000000000000000000000000000..8bfbf3ef1d6a7fcdbe10b5b9c5647b36e1aa8b31 --- /dev/null +++ b/images/Shaft_01859.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcdf334b0ab4298a9411e3e5ed75430d3bce9b31992d65961f91ed18b6ed3498 +size 82522 diff --git a/images/Shaft_01860.png b/images/Shaft_01860.png new file mode 100644 index 0000000000000000000000000000000000000000..9bc049d637fa1de52c8282766088e6b8b9bdb7a9 --- /dev/null +++ b/images/Shaft_01860.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6bdffd7eeec1f9981d940fc70e65f64bf9d9ce3db53f4ccbdbc8969c78601a2b +size 83537 diff --git a/images/Shaft_01861.png b/images/Shaft_01861.png new file mode 100644 index 0000000000000000000000000000000000000000..e1153688c8cde5210d611672d62f5075e201ed1b --- /dev/null +++ b/images/Shaft_01861.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c75d2d031120668f913254e85e75ea0b129c3e0f17edc2dda4dd56ef229233f +size 75401 diff --git a/images/Shaft_01862.png b/images/Shaft_01862.png new file mode 100644 index 0000000000000000000000000000000000000000..53c9a627d60b4b22fa4f132e71eb02bf44b9f1a7 --- /dev/null +++ b/images/Shaft_01862.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aac7f0cecb49f43b61f247a3e88e92b58ac8375bbc55ed73848efde0756e1776 +size 80718 diff --git a/images/Shaft_01863.png b/images/Shaft_01863.png new file mode 100644 index 0000000000000000000000000000000000000000..f0118e0b0fc52ce0015129fa5f82e0dd0db565e0 --- /dev/null +++ b/images/Shaft_01863.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b15e282a5677296ae1fe364c270bca5c3cb6087c124b275f0cb977ae3f24620 +size 75781 diff --git a/images/Shaft_01864.png b/images/Shaft_01864.png new file mode 100644 index 0000000000000000000000000000000000000000..ba3bbc59d9c445961929c659a13a16a3b04c4be6 --- /dev/null +++ b/images/Shaft_01864.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16dd6e486ed346d4af1ebb12d8279cf3b1ba52b704ef748e84bc03fadeba2474 +size 73680 diff --git a/images/Shaft_01865.png b/images/Shaft_01865.png new file mode 100644 index 0000000000000000000000000000000000000000..4498bede0fb4f13819e2947aaba9c28524c794fa --- /dev/null +++ b/images/Shaft_01865.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6bf5107da8fb9225186dc411c97cf45be576084079bae81f20fbbc219aceec37 +size 108369 diff --git a/images/Shaft_01866.png b/images/Shaft_01866.png new file mode 100644 index 0000000000000000000000000000000000000000..f6c8776a44c38874ea0b41e979ac48688b398992 --- /dev/null +++ b/images/Shaft_01866.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9af2ac386a9ad85fe00da4ad9a290f8d47383bfb0a2afbb4cbadf64505896b5 +size 93702 diff --git a/images/Shaft_01867.png b/images/Shaft_01867.png new file mode 100644 index 0000000000000000000000000000000000000000..d985c96aa86c174be7864dc8a6e6ee72d2063143 --- /dev/null +++ b/images/Shaft_01867.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22ad7f1f4c9a3d995bc5bfd87561424fee9f24e6a280bfa1a6b128d81c11d24a +size 86761 diff --git a/images/Shaft_01868.png b/images/Shaft_01868.png new file mode 100644 index 0000000000000000000000000000000000000000..857da1251a544bb25eb86dbfd0ea68b92fdc8c72 --- /dev/null +++ b/images/Shaft_01868.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6d27838df24769dd1e4584e13173f49c26e451ddcf6141860f82ea75c519843 +size 94217 diff --git a/images/Shaft_01869.png b/images/Shaft_01869.png new file mode 100644 index 0000000000000000000000000000000000000000..157736cb37711f2eb69a9ad9b04864ead1abe567 --- /dev/null +++ b/images/Shaft_01869.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ff1e5879a9d8b396693f4209347184c9d2e7d1e0a39e4cd7ef14449d7f6d8f8 +size 101990 diff --git a/images/Shaft_01870.png b/images/Shaft_01870.png new file mode 100644 index 0000000000000000000000000000000000000000..d46a0516f64d7c6ce48376f50c3e0fe043c7d9fa --- /dev/null +++ b/images/Shaft_01870.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01dc5909cc60348febfb70eefdeb51920c24a2312001ccb6d45530a6b602074e +size 102373 diff --git a/images/Shaft_01871.png b/images/Shaft_01871.png new file mode 100644 index 0000000000000000000000000000000000000000..32d115e2d1219dc03a47928f5787f4a736bf089a --- /dev/null +++ b/images/Shaft_01871.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:815e14861d2c0b8f01a8878087922c2394aced35023f1ed68b45c7604a630b3a +size 82862 diff --git a/images/Shaft_01872.png b/images/Shaft_01872.png new file mode 100644 index 0000000000000000000000000000000000000000..4851ea267162e0eae3cbd40a9e00a597e30bc68c --- /dev/null +++ b/images/Shaft_01872.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d2ed2184ae7953df82d5c0df36f6fdd479cce8ea8b1b398749645e02093582d +size 85508 diff --git a/images/Shaft_01873.png b/images/Shaft_01873.png new file mode 100644 index 0000000000000000000000000000000000000000..f212fc9c0c6b33bb251cc5ef95d5515658d8fd4d --- /dev/null +++ b/images/Shaft_01873.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ccf9b5839a82e2d9e62b13aad1a21d9f82271ca6c82797c843290ff94a45b3b +size 79235 diff --git a/images/Shaft_01874.png b/images/Shaft_01874.png new file mode 100644 index 0000000000000000000000000000000000000000..533dc9689437edee03d74e051e28cfcc89e812d5 --- /dev/null +++ b/images/Shaft_01874.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2eac485aeebd71720b6ac2921cb1a69b76fe746c637f5c65680f2b9c8c92c4c1 +size 70985 diff --git a/images/Shaft_01875.png b/images/Shaft_01875.png new file mode 100644 index 0000000000000000000000000000000000000000..c9f7bb009b6a389380f64a22f0c9899dd9f5b8ab --- /dev/null +++ b/images/Shaft_01875.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58b922c4885f04c2829fd4e06e3ed0dad7616ae9ae463eeb3459d4af983e4632 +size 119515 diff --git a/images/Shaft_01876.png b/images/Shaft_01876.png new file mode 100644 index 0000000000000000000000000000000000000000..715008683d7415bbea0d8e1bf65e62847c8d8f73 --- /dev/null +++ b/images/Shaft_01876.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a61898677c64f3405b0bb587812db130810f96e3c1cd5ebf04772252746c2f8 +size 106051 diff --git a/images/Shaft_01877.png b/images/Shaft_01877.png new file mode 100644 index 0000000000000000000000000000000000000000..93f216691b639e4158f4f25b28d7512398e29ca2 --- /dev/null +++ b/images/Shaft_01877.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb6837bb44f0b89fdccac555fa69cc6d447e10de71e45b51544276942b684196 +size 69483 diff --git a/images/Shaft_01878.png b/images/Shaft_01878.png new file mode 100644 index 0000000000000000000000000000000000000000..27ba0a10419f435a82a6748985f9ff0c0688087c --- /dev/null +++ b/images/Shaft_01878.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e755f813a2ef2364a2ca032aa3e27dc83144d0169350af8594983452a7e4d0eb +size 82822 diff --git a/images/Shaft_01879.png b/images/Shaft_01879.png new file mode 100644 index 0000000000000000000000000000000000000000..fbb424f08f2047761bcf02829d37b1a11d6e0dcb --- /dev/null +++ b/images/Shaft_01879.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e2975b60a3355c5f5a4f2b099a397ec5204c737aaec221c853f7e55eaa12105 +size 107478 diff --git a/images/Shaft_01880.png b/images/Shaft_01880.png new file mode 100644 index 0000000000000000000000000000000000000000..e56fa606215890c389d9efa52e63cd9303e0dcd0 --- /dev/null +++ b/images/Shaft_01880.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12eedfb75e001ff8b004cefeb8454d96ede075bb3f5e213ed62b75e72e242254 +size 106116 diff --git a/images/Shaft_01881.png b/images/Shaft_01881.png new file mode 100644 index 0000000000000000000000000000000000000000..f605325aa12512226c33d01fa821e1c0d8a1d6df --- /dev/null +++ b/images/Shaft_01881.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:021ee6ebd1671d5382c1da70fc5f30183e057c71d8e3eaee00a6b05db8db2293 +size 77601 diff --git a/images/Shaft_01882.png b/images/Shaft_01882.png new file mode 100644 index 0000000000000000000000000000000000000000..6e94e90b2f8ab99781a1080b0bceba5bfdb63267 --- /dev/null +++ b/images/Shaft_01882.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90880ce052d66c647b46be4fcf1798de83842b3e82dfb0f645cdb268f1e7c0dc +size 74148 diff --git a/images/Shaft_01883.png b/images/Shaft_01883.png new file mode 100644 index 0000000000000000000000000000000000000000..dd8ca06dabb673f100fa70d9a4885cd0820accc4 --- /dev/null +++ b/images/Shaft_01883.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ba454e7b9478c8556a157921c9ddb82f40f4853c171536603bb30888539fc06 +size 82290 diff --git a/images/Shaft_01884.png b/images/Shaft_01884.png new file mode 100644 index 0000000000000000000000000000000000000000..29d08abfdf4939cd04aacbb1c7c5bf32d0e164b7 --- /dev/null +++ b/images/Shaft_01884.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc89bdd1d198ee94a284628099feeb7e32b6f2bb4d287913e7996bd4af28b684 +size 78891 diff --git a/images/Shaft_01885.png b/images/Shaft_01885.png new file mode 100644 index 0000000000000000000000000000000000000000..a626435c7822476761bb65a34cb823fd8f36f697 --- /dev/null +++ b/images/Shaft_01885.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:038de5c1b9e4faf4164f45191e8caf553ee1b5281ffd1d796e11e216117de613 +size 74087 diff --git a/images/Shaft_01886.png b/images/Shaft_01886.png new file mode 100644 index 0000000000000000000000000000000000000000..94a5f7bde343c541de3e7834f52a9e76edf3d9ba --- /dev/null +++ b/images/Shaft_01886.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a028b317c1a939ff33aee0d5116bfc3dc46daedcf3b7908f14355b41494f2480 +size 91219 diff --git a/images/Shaft_01887.png b/images/Shaft_01887.png new file mode 100644 index 0000000000000000000000000000000000000000..c6fd36325583ff54b4dda23371bfbe446b27e5dc --- /dev/null +++ b/images/Shaft_01887.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e860005edd9d3d480682c67b30723e53a97f9ed7eac12e6001d5d442fb883e +size 78371 diff --git a/images/Shaft_01888.png b/images/Shaft_01888.png new file mode 100644 index 0000000000000000000000000000000000000000..af9827ea10bbc0c6003bcc76ade49cccd8296f6b --- /dev/null +++ b/images/Shaft_01888.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:875ce0f5eba26631148726208d3cfebe3ac9083c0ae7553f1a4feda0a86c390b +size 86021 diff --git a/images/Shaft_01889.png b/images/Shaft_01889.png new file mode 100644 index 0000000000000000000000000000000000000000..2bbb56663f6b06506e4c3525456e27a457878f06 --- /dev/null +++ b/images/Shaft_01889.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:665cfc75ef57d76d1a55cff88b95e28e1943aad7a4f4fce243ae65e4fd0cfc3e +size 80955 diff --git a/images/Shaft_01890.png b/images/Shaft_01890.png new file mode 100644 index 0000000000000000000000000000000000000000..f4e9b0fa7d43f8a446bc72d8612d9ce914d83c2c --- /dev/null +++ b/images/Shaft_01890.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87b94b44250cf9123eb5ef4906089d119daea6d8fcc44650a4b5fd175ebb8a66 +size 91556 diff --git a/images/Shaft_01891.png b/images/Shaft_01891.png new file mode 100644 index 0000000000000000000000000000000000000000..17e1bb3a8d3d382fe19c73b70da49f257cce9c7d --- /dev/null +++ b/images/Shaft_01891.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d85aa7370308d9829749b96ea6ff3d356d5c21e845a8437396f05fb9a4f3db2 +size 97370 diff --git a/images/Shaft_01892.png b/images/Shaft_01892.png new file mode 100644 index 0000000000000000000000000000000000000000..63d476455aac3dbc64a6df2f7c8e4ab22fec7575 --- /dev/null +++ b/images/Shaft_01892.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85cc055ed7ac70896bfab120e4a0fca46461b06cc4e73f0520582426575fb3ff +size 88455 diff --git a/images/Shaft_01893.png b/images/Shaft_01893.png new file mode 100644 index 0000000000000000000000000000000000000000..7633eccb3b7ca74415bc10efda76541e9d8ff4db --- /dev/null +++ b/images/Shaft_01893.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c294f7d5d0435bc069b6eed96f66b480c60f65afb6e97771810a5532a9090057 +size 97532 diff --git a/images/Shaft_01894.png b/images/Shaft_01894.png new file mode 100644 index 0000000000000000000000000000000000000000..b0506d18156386c541160d1d0c6104d4e5433a37 --- /dev/null +++ b/images/Shaft_01894.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a56f1163c7e99b4f4b4955e1a7a9743852b0e69aefaaf20f0232ea59ec76c81 +size 73244 diff --git a/images/Shaft_01895.png b/images/Shaft_01895.png new file mode 100644 index 0000000000000000000000000000000000000000..17fd21dba03e3438f5b598fd5e23fff548c95e49 --- /dev/null +++ b/images/Shaft_01895.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:832873f9d30128c322bd5a533fe375841ca2dd1ef36ba577c1e25391aac40ac2 +size 95527 diff --git a/images/Shaft_01896.png b/images/Shaft_01896.png new file mode 100644 index 0000000000000000000000000000000000000000..be73739cc17be21033a7a7adf65ae0828cfdd630 --- /dev/null +++ b/images/Shaft_01896.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9f9fc320b3bebcc9a368cefac4236d7f1b68983b91887bd6324cf5c326f9082 +size 87050 diff --git a/images/Shaft_01897.png b/images/Shaft_01897.png new file mode 100644 index 0000000000000000000000000000000000000000..89bb2400fd78781f4398509e6c019b458cd61c55 --- /dev/null +++ b/images/Shaft_01897.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23734d9ee4e4e6ab30084efd7a3bf6e98d846fa8d10807ebca59535baf273b14 +size 90953 diff --git a/images/Shaft_01898.png b/images/Shaft_01898.png new file mode 100644 index 0000000000000000000000000000000000000000..6728baf775e68a9fcc476019474124a7d9b3b3e0 --- /dev/null +++ b/images/Shaft_01898.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39f95624e43b7eb83565b378737f686255d9b494452cd08961d19f8295b19f36 +size 72056 diff --git a/images/Shaft_01899.png b/images/Shaft_01899.png new file mode 100644 index 0000000000000000000000000000000000000000..f530bd7ba69fe639903aaa7c9dbd402c2abc3c2c --- /dev/null +++ b/images/Shaft_01899.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b6bfc6b5f16915bd06163405fd062e12208ee02b78d72fff4bdb45c1c82299d +size 75983 diff --git a/images/Shaft_01900.png b/images/Shaft_01900.png new file mode 100644 index 0000000000000000000000000000000000000000..2b301683ea691e8c5e944c5cfa3843a662ee9dc2 --- /dev/null +++ b/images/Shaft_01900.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ba5b6861b2555e7eeb366e3ebecca530d4fd9b060571cb78d96e8925883b11b +size 108840 diff --git a/images/Shaft_01901.png b/images/Shaft_01901.png new file mode 100644 index 0000000000000000000000000000000000000000..5ac6a1f44fb3894a0a50327cf2e1be05a207f5c0 --- /dev/null +++ b/images/Shaft_01901.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b205849fcb23d330898114b8638bcef21c66dbafe82bbbce4e57d1fe81e01184 +size 75120 diff --git a/images/Shaft_01902.png b/images/Shaft_01902.png new file mode 100644 index 0000000000000000000000000000000000000000..63622bdfef14dba0b54c33648a39bdc096158e4d --- /dev/null +++ b/images/Shaft_01902.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fbf767955a6c70deea7d1975f3166f303e3a6fea9b65dc11de8ca676de00048 +size 88968 diff --git a/images/Shaft_01903.png b/images/Shaft_01903.png new file mode 100644 index 0000000000000000000000000000000000000000..6b625255a770baf3e0e4ad0fd722d9fc912c6087 --- /dev/null +++ b/images/Shaft_01903.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8102f32edf4fb639a49baab66c6955783cf156baf5a8a71e0b9112624299131c +size 83203 diff --git a/images/Shaft_01904.png b/images/Shaft_01904.png new file mode 100644 index 0000000000000000000000000000000000000000..1ef037574281d5e6c3ee4ec30fcd79ef6a1a94be --- /dev/null +++ b/images/Shaft_01904.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa111feea566f6ee3545f0cf279af19970d9a0f567ce123f4bbdb35892f62358 +size 74721 diff --git a/images/Shaft_01905.png b/images/Shaft_01905.png new file mode 100644 index 0000000000000000000000000000000000000000..c51120c90149a5e73e6877b3bbea03b8d8c32626 --- /dev/null +++ b/images/Shaft_01905.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c4fdcd6e2062e5dc8b3d1087c52ed9fb9b890664b507d9b3bde6a707d41e2f4 +size 83333 diff --git a/images/Shaft_01906.png b/images/Shaft_01906.png new file mode 100644 index 0000000000000000000000000000000000000000..e6ee6e2ee24333c0865525a5dd33c91d0628d4a1 --- /dev/null +++ b/images/Shaft_01906.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5321ac84540f0b7b1fef9d770e35fcaa3d9e8a9da0ae04e9c287fd4fdb3ce283 +size 85872 diff --git a/images/Shaft_01907.png b/images/Shaft_01907.png new file mode 100644 index 0000000000000000000000000000000000000000..58a5c0d795882298b63a7591818c2d0fb353e234 --- /dev/null +++ b/images/Shaft_01907.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5233a972a761b80b93e9a9102cd093b5201cfc648a4ce6e1057157b801d0e6a3 +size 81857 diff --git a/images/Shaft_01908.png b/images/Shaft_01908.png new file mode 100644 index 0000000000000000000000000000000000000000..59febbf8e592337f2c6050bf7a6fc7838316f1c0 --- /dev/null +++ b/images/Shaft_01908.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1b311ae1ee8ec05249b19859706fd473e5f8362578caca51ebb746d94301ce3 +size 84906 diff --git a/images/Shaft_01909.png b/images/Shaft_01909.png new file mode 100644 index 0000000000000000000000000000000000000000..ee7ac3ce603a0c8bcd133bc6cef2c269c9ddfc2b --- /dev/null +++ b/images/Shaft_01909.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f900efe0226bba63a6d420d6385e1a13c7615cf5dee45a58e810231c6ee978a +size 79805 diff --git a/images/Shaft_01910.png b/images/Shaft_01910.png new file mode 100644 index 0000000000000000000000000000000000000000..a42a9475cd50ecdb2a0f09ba91e8bf8932121e07 --- /dev/null +++ b/images/Shaft_01910.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76ac864b097a501dd5977be7f04cad7ebc5afe4dde84165dfcb00ed335b3fe69 +size 92179 diff --git a/images/Shaft_01911.png b/images/Shaft_01911.png new file mode 100644 index 0000000000000000000000000000000000000000..20e18f2143bf4db33d9451cbe4ff156445784ea4 --- /dev/null +++ b/images/Shaft_01911.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87610bff4b980b63a3c7412b4898157ca129384e8b3806b8ff66a72cebc96276 +size 68665 diff --git a/images/Shaft_01912.png b/images/Shaft_01912.png new file mode 100644 index 0000000000000000000000000000000000000000..2db37019058ec86b6814bdb24584de8752463552 --- /dev/null +++ b/images/Shaft_01912.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b65317001c7048c344d49312e5cfb7f40b8475d3eb421c599261ef26404140a9 +size 96496 diff --git a/images/Shaft_01913.png b/images/Shaft_01913.png new file mode 100644 index 0000000000000000000000000000000000000000..7d23db2677ccda55eed1d3916377f2de1def481b --- /dev/null +++ b/images/Shaft_01913.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bb448d0141f45cace15655e8c25a292a16463507c3dab30bc155670d77f204c +size 83599 diff --git a/images/Shaft_01914.png b/images/Shaft_01914.png new file mode 100644 index 0000000000000000000000000000000000000000..e330ddee360da965a8d3a05a70378eb5f7b9c516 --- /dev/null +++ b/images/Shaft_01914.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8f79ba35e627d4b29d21295f0634b0c521542926195c102b66d5a777d0c0d20 +size 78684 diff --git a/images/Shaft_01915.png b/images/Shaft_01915.png new file mode 100644 index 0000000000000000000000000000000000000000..38fc45a38703c4b069f37b214b72c1002deb4c51 --- /dev/null +++ b/images/Shaft_01915.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e397e7693860236ff57705f8b01f4249e11fc889a4369ee703d55f5d36e0de +size 73973 diff --git a/images/Shaft_01916.png b/images/Shaft_01916.png new file mode 100644 index 0000000000000000000000000000000000000000..b2ad26b06c3805d16514a5bfc0d977f3d9cfbf3c --- /dev/null +++ b/images/Shaft_01916.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa9a9f349e56f3d1fad568a95055aacd8efd45aea930fb985aae0773d93e4948 +size 69395 diff --git a/images/Shaft_01917.png b/images/Shaft_01917.png new file mode 100644 index 0000000000000000000000000000000000000000..504f60db2eb71b23ef2efb6a38b431f808aacd2d --- /dev/null +++ b/images/Shaft_01917.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9004ab0cb2946007550d0071f91db011b29afd6b543fc36d3abafbc015b597c8 +size 84287 diff --git a/images/Shaft_01918.png b/images/Shaft_01918.png new file mode 100644 index 0000000000000000000000000000000000000000..80ab95d3906812f5ef0ffa69da274adb6d288d8e --- /dev/null +++ b/images/Shaft_01918.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:842b2218bdf087c7a98a473d7222b38e7669e0236377f76ef4cafcc6a9e2ed96 +size 83161 diff --git a/images/Shaft_01919.png b/images/Shaft_01919.png new file mode 100644 index 0000000000000000000000000000000000000000..b4f8cea6f30648fcf7d04633a808f6c50053f79d --- /dev/null +++ b/images/Shaft_01919.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48fdd2873c748e01c352fdd747ecee6f3c5bef95250c8695b09802cdaab89164 +size 105682 diff --git a/images/Shaft_01920.png b/images/Shaft_01920.png new file mode 100644 index 0000000000000000000000000000000000000000..7c4f30e4d3a8d870b9edbcc0a11b6a6f34f03b3a --- /dev/null +++ b/images/Shaft_01920.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02c9f2105e6e0bd008fbc98ffdbf17367a17795ca1b220ee0fbdb56da6554352 +size 101640 diff --git a/images/Shaft_01921.png b/images/Shaft_01921.png new file mode 100644 index 0000000000000000000000000000000000000000..b5f9a75a997e336e6b2db81ab150169362e1f8fe --- /dev/null +++ b/images/Shaft_01921.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:690c05fe47cea8a34bccb04076dd152592e4f1dfe1f2349f40b6978e76ec158e +size 73538 diff --git a/images/Shaft_01922.png b/images/Shaft_01922.png new file mode 100644 index 0000000000000000000000000000000000000000..93d284444cca36e19b753fc333c205f17c8d6e42 --- /dev/null +++ b/images/Shaft_01922.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cd0a5a95bbef87589da41f1e5c8a5bbb95bf1e0cf41ed36dde5d0950ffd3769 +size 85952 diff --git a/images/Shaft_01923.png b/images/Shaft_01923.png new file mode 100644 index 0000000000000000000000000000000000000000..c82c59974a417aaca732e6238be2859f2d7f3720 --- /dev/null +++ b/images/Shaft_01923.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41ef2ebb684224fc92c872b8209d382ecd7765bc8eacc5262b063eaa86cd4509 +size 84443 diff --git a/images/Shaft_01924.png b/images/Shaft_01924.png new file mode 100644 index 0000000000000000000000000000000000000000..c91fb803d2d203d477fcdc9ebf5d999720f0ebbb --- /dev/null +++ b/images/Shaft_01924.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:270ed804795d0ac1aab6e85878bfcaddb1cc1187b0cf17e037d68174c983769b +size 80128 diff --git a/images/Shaft_01925.png b/images/Shaft_01925.png new file mode 100644 index 0000000000000000000000000000000000000000..164451510eb4c3851af91002e75310f7220a71f1 --- /dev/null +++ b/images/Shaft_01925.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77ad6a1dbb4a626cdf9155ccd40a0d7bb8f89b62b1920f85e3119e7aba810b93 +size 94891 diff --git a/images/Shaft_01926.png b/images/Shaft_01926.png new file mode 100644 index 0000000000000000000000000000000000000000..8ad4e3eb0e43e8c041d0e5ad551caad61389075a --- /dev/null +++ b/images/Shaft_01926.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15d3b33daa404cae84ebd99ef327f3af17dca16a21efbc9677a2cb707d0515f2 +size 94752 diff --git a/images/Shaft_01927.png b/images/Shaft_01927.png new file mode 100644 index 0000000000000000000000000000000000000000..c2151a8eff8d3ade15b41342927483eba6e2c1d9 --- /dev/null +++ b/images/Shaft_01927.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00d26f0ac935024b3744d39b0d7c207ce90ee298afa28d0e55b0f0fc04071200 +size 93417 diff --git a/images/Shaft_01928.png b/images/Shaft_01928.png new file mode 100644 index 0000000000000000000000000000000000000000..cb55a4624ad85bc0523f4d972a71911b2e848cce --- /dev/null +++ b/images/Shaft_01928.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eab849540b0d84475d9d3753cedf47182d3c979f90334d978567b39d60a472f4 +size 107399 diff --git a/images/Shaft_01929.png b/images/Shaft_01929.png new file mode 100644 index 0000000000000000000000000000000000000000..66f5fb320369a7cf8a46aa628cb65ca854750052 --- /dev/null +++ b/images/Shaft_01929.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f67a93493e7a2fb3c8a3764dbf67b2522017c9954eee61d183f0ca135360295 +size 90046 diff --git a/images/Shaft_01930.png b/images/Shaft_01930.png new file mode 100644 index 0000000000000000000000000000000000000000..5504c2f257ff79076c272032aa5b0afb97a59f29 --- /dev/null +++ b/images/Shaft_01930.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aed978a14ec606286e73a0998c265cebd16b482864ca67236a25ddad59b977c4 +size 86870 diff --git a/images/Shaft_01931.png b/images/Shaft_01931.png new file mode 100644 index 0000000000000000000000000000000000000000..fa9772407090927e97e313edc4302c078c460fb5 --- /dev/null +++ b/images/Shaft_01931.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f98a6762d243ccf0f2aaa81ef387824aa2bd7a915c11f14e53565d6cbc1aaadd +size 76054 diff --git a/images/Shaft_01932.png b/images/Shaft_01932.png new file mode 100644 index 0000000000000000000000000000000000000000..68cb8bb645d25ddf36af2f3f3d9ff16c6b882311 --- /dev/null +++ b/images/Shaft_01932.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8db9b9e59e842e31035cea86fa2b94cb136e7a77516b282352e9c00e25a9e53 +size 111397 diff --git a/images/Shaft_01933.png b/images/Shaft_01933.png new file mode 100644 index 0000000000000000000000000000000000000000..651f1ca2a55d142af8bcf711da5ee6eb092efe70 --- /dev/null +++ b/images/Shaft_01933.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ced878df2922a9a43ae57977dba537f051d25898ae3e1f72b1a489fbe486d03 +size 84398 diff --git a/images/Shaft_01934.png b/images/Shaft_01934.png new file mode 100644 index 0000000000000000000000000000000000000000..fb9097b77970c9412912c28399fdea22814a8878 --- /dev/null +++ b/images/Shaft_01934.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ac35323ce5585eec599d6878f16d2202a9583c29147de9d6d2e2851d79dea8c +size 69184 diff --git a/images/Shaft_01935.png b/images/Shaft_01935.png new file mode 100644 index 0000000000000000000000000000000000000000..1d18c154881b2a5ec1c38cc3496d8b0537261a96 --- /dev/null +++ b/images/Shaft_01935.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b989bc2c22ddf72a3237f6f71a39a1d74fccc042eaf2ec1ccc9062dccc9484ee +size 76276 diff --git a/images/Shaft_01936.png b/images/Shaft_01936.png new file mode 100644 index 0000000000000000000000000000000000000000..380546674a1e1eb21f0aa24781bae52125d5f4b8 --- /dev/null +++ b/images/Shaft_01936.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78601d52eb61d541ddac5edc8046cff16eecf084f3b2d0b9564e2db6efdf9f57 +size 79393 diff --git a/images/Shaft_01937.png b/images/Shaft_01937.png new file mode 100644 index 0000000000000000000000000000000000000000..b1e874cb1c1d8d4c35dce459a788d1caeead7f8d --- /dev/null +++ b/images/Shaft_01937.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c87ef5476702704d7e963f5b8fdcd7eb12827bd53042cd6f4ef3bc7644395d8 +size 76744 diff --git a/images/Shaft_01938.png b/images/Shaft_01938.png new file mode 100644 index 0000000000000000000000000000000000000000..2148f1fe323eb5d7597a2ba4146a267de8ab5543 --- /dev/null +++ b/images/Shaft_01938.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6672719ce86e24cb06d343bdd3acf8b782c3fd1402c352df5177204ebe9d60df +size 78109 diff --git a/images/Shaft_01939.png b/images/Shaft_01939.png new file mode 100644 index 0000000000000000000000000000000000000000..a8487d78becb7b696f4feba7401545b90c6f357d --- /dev/null +++ b/images/Shaft_01939.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c2f53b6d6c7442bc16c10f0ecc257c60f426ed48fabdf1a2e3c549d0743a18d +size 97608 diff --git a/images/Shaft_01940.png b/images/Shaft_01940.png new file mode 100644 index 0000000000000000000000000000000000000000..0db9e03c60eb5d42e8e430ec44bb06509bcfbc58 --- /dev/null +++ b/images/Shaft_01940.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b986012a90bfc0d994ac353f841da11a47374c8d1c39693e3cf774b8dd5ca66c +size 88881 diff --git a/images/Shaft_01941.png b/images/Shaft_01941.png new file mode 100644 index 0000000000000000000000000000000000000000..65c864ea7e251c8476fe144e990ca5f6aaf71eac --- /dev/null +++ b/images/Shaft_01941.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:688c2d9162d56853b35ed5cef6d1e29f32bf0eff2f07be0eef0dd787d20c3d91 +size 65567 diff --git a/images/Shaft_01942.png b/images/Shaft_01942.png new file mode 100644 index 0000000000000000000000000000000000000000..5888b2a2382c0ff0e1d6098d0cc18db0f0a817ee --- /dev/null +++ b/images/Shaft_01942.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9eb9d9efeecd49e711a74bcfdba44bb2e9d0bf9bed37e925421cdb7c81e81e0 +size 74467 diff --git a/images/Shaft_01943.png b/images/Shaft_01943.png new file mode 100644 index 0000000000000000000000000000000000000000..267c996b9fe60e3d452b54d4e557618d93267477 --- /dev/null +++ b/images/Shaft_01943.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d25a966b18bbf2cd402e3dd44819913f72fb6eb6246325318f2dce2332e9fe6 +size 112414 diff --git a/images/Shaft_01944.png b/images/Shaft_01944.png new file mode 100644 index 0000000000000000000000000000000000000000..af570601ea18828e2eace5cf208e9a9b3b470ebe --- /dev/null +++ b/images/Shaft_01944.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1b06464438765924ad95a21efc0e45243bfb110d71a57e448b2ba6b8248a034 +size 79363 diff --git a/images/Shaft_01945.png b/images/Shaft_01945.png new file mode 100644 index 0000000000000000000000000000000000000000..7291ea24485a7bac2c0c6579a3f6e9d8fa2e3338 --- /dev/null +++ b/images/Shaft_01945.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d926194cd983395ae83fef91601b9c11b527eb5a18b71a34a87cce53f1e4ed65 +size 87698 diff --git a/images/Shaft_01946.png b/images/Shaft_01946.png new file mode 100644 index 0000000000000000000000000000000000000000..c65d4d93e90c078d2ef88879d94f2cd88122f649 --- /dev/null +++ b/images/Shaft_01946.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d6b19341ad166767eac48db27aa326e84d75b1f01e06fbcd7a7e9c5e9f94231 +size 89432 diff --git a/images/Shaft_01947.png b/images/Shaft_01947.png new file mode 100644 index 0000000000000000000000000000000000000000..b91fef4ba9ad6753bb0e182b4becfb1f8b6423b4 --- /dev/null +++ b/images/Shaft_01947.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6608553407909c11a61f3a7676ab624f50444d41732239aa79668790d5470d33 +size 93207 diff --git a/images/Shaft_01948.png b/images/Shaft_01948.png new file mode 100644 index 0000000000000000000000000000000000000000..3e4c224bdfb8c36ca4b6b040958942577a05c2b7 --- /dev/null +++ b/images/Shaft_01948.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d635f12ddc64bae8a5d823b5dd4a2dcbd2214e01fc21ba407f29f740b4a7c41 +size 85377 diff --git a/images/Shaft_01949.png b/images/Shaft_01949.png new file mode 100644 index 0000000000000000000000000000000000000000..a2ae9294976473b73397c28364fb434fd216396c --- /dev/null +++ b/images/Shaft_01949.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43e79e918e9a226b06d86324c3d32964b3dc2ee43e198fb5fc95588dbd6a49a3 +size 73222 diff --git a/images/Shaft_01950.png b/images/Shaft_01950.png new file mode 100644 index 0000000000000000000000000000000000000000..02f1be9e5f76a38137fd4ef039c131673a0f8d04 --- /dev/null +++ b/images/Shaft_01950.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8be7cd723022c41c53e126281505df303344bf3e1f97a78723cc65273855103 +size 82658 diff --git a/images/Shaft_01951.png b/images/Shaft_01951.png new file mode 100644 index 0000000000000000000000000000000000000000..38f328425ea38b0e0c6f712e040481ca2934858b --- /dev/null +++ b/images/Shaft_01951.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2bfbdce319b0743407b58332519e1456fd30f7694b552a4c157c170487d7732 +size 71060 diff --git a/images/Shaft_01952.png b/images/Shaft_01952.png new file mode 100644 index 0000000000000000000000000000000000000000..705c85a13b7b65a2928a31bfedf01c856f3391c4 --- /dev/null +++ b/images/Shaft_01952.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1c0eff75b8ddb14272b3e7c42376f468557f6beab3ea3aeefd42575f053b0bb +size 93808 diff --git a/images/Shaft_01953.png b/images/Shaft_01953.png new file mode 100644 index 0000000000000000000000000000000000000000..73cc7fbb018d46136973c5ae1766fe5e29f81015 --- /dev/null +++ b/images/Shaft_01953.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1767e3364dd22dea9dc17c6ce658cd6390768c744b8938b9b8508ac6ed77716 +size 76870 diff --git a/images/Shaft_01954.png b/images/Shaft_01954.png new file mode 100644 index 0000000000000000000000000000000000000000..a7f53b201f0a67003a2665708d86aeb2a48a6cba --- /dev/null +++ b/images/Shaft_01954.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3250b33216d33e10ec543864a8a7bcaa5641f28214a70ac9cd39c282c990a5fc +size 93656 diff --git a/images/Shaft_01955.png b/images/Shaft_01955.png new file mode 100644 index 0000000000000000000000000000000000000000..80f6d946120919e58288032b3d5f034b0d863dc1 --- /dev/null +++ b/images/Shaft_01955.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:485a96a9db22e232484f909cd3bd028c100cf5aca7340c302d1e6a1785c7f1e7 +size 95163 diff --git a/images/Shaft_01956.png b/images/Shaft_01956.png new file mode 100644 index 0000000000000000000000000000000000000000..0a47516929c027300de2d0467ed032d0026fc88e --- /dev/null +++ b/images/Shaft_01956.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb2e8d010506134c319c80187d05b79a7e5d0c41557fb137cf0d9fe1d8541f40 +size 95613 diff --git a/images/Shaft_01957.png b/images/Shaft_01957.png new file mode 100644 index 0000000000000000000000000000000000000000..a0b757f332330ff689de0692524458ef244a3f42 --- /dev/null +++ b/images/Shaft_01957.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f37c504151c301ef2e05f338d1d4cd3005b18f7fc96219eac99ca9ff1d54e73 +size 102731 diff --git a/images/Shaft_01958.png b/images/Shaft_01958.png new file mode 100644 index 0000000000000000000000000000000000000000..6a642324641593a740164f49e272fb8392dfb520 --- /dev/null +++ b/images/Shaft_01958.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebcbe4252a90bd6cc34108d4ff228054121a0052216a0321154773f927a02be8 +size 97902 diff --git a/images/Shaft_01959.png b/images/Shaft_01959.png new file mode 100644 index 0000000000000000000000000000000000000000..9c091d2cfdd9604da6d514eccc26abc312c91c1f --- /dev/null +++ b/images/Shaft_01959.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f1af020670a1c130958d51c3f745faa6b2a68a50946f0249ef0f6b46108fe0f +size 87496 diff --git a/images/Shaft_01960.png b/images/Shaft_01960.png new file mode 100644 index 0000000000000000000000000000000000000000..2f6dce709a646dfc0e74a839aab1946490f1c74e --- /dev/null +++ b/images/Shaft_01960.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02586a7cb13b7e061ff85c1ced1ac230717b15bc7d9c9b6b163b5c9e4e9a5604 +size 89882 diff --git a/images/Shaft_01961.png b/images/Shaft_01961.png new file mode 100644 index 0000000000000000000000000000000000000000..e8601d16f17101fc58956d8dc129676869441f60 --- /dev/null +++ b/images/Shaft_01961.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e94aa352adda71354f588eda17425b5ec65687a3647bde1586865da7b5e7ee6a +size 75621 diff --git a/images/Shaft_01962.png b/images/Shaft_01962.png new file mode 100644 index 0000000000000000000000000000000000000000..68dd1925acc95ee7c1c37787c215aa6bcaf305a9 --- /dev/null +++ b/images/Shaft_01962.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad65b3aa29dc8a58ef7a3134366944d911dc9116226f32741cfd766ab7b178d2 +size 71229 diff --git a/images/Shaft_01963.png b/images/Shaft_01963.png new file mode 100644 index 0000000000000000000000000000000000000000..a39850cc1adfd360ba20d18df95c160373db9082 --- /dev/null +++ b/images/Shaft_01963.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97485ace67605afa4b1b9816576ff80f751100dafe2e802fc2b12914899bd82c +size 77845 diff --git a/images/Shaft_01964.png b/images/Shaft_01964.png new file mode 100644 index 0000000000000000000000000000000000000000..d9ac083b262ac3c32786ecb1bb73ef0fc47f4885 --- /dev/null +++ b/images/Shaft_01964.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63443be19f696888dd01ade9d986162a966f1349430176e76664cb1771c1eb7d +size 91864 diff --git a/images/Shaft_01965.png b/images/Shaft_01965.png new file mode 100644 index 0000000000000000000000000000000000000000..5b7f2b69dc844425ae998920695fc268fa6386c9 --- /dev/null +++ b/images/Shaft_01965.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab6513437acefd9707c3c86b1732a3c4baacdf5cac5cbad325f6f780f02718b2 +size 84858 diff --git a/images/Shaft_01966.png b/images/Shaft_01966.png new file mode 100644 index 0000000000000000000000000000000000000000..beec225629b64ee561dcc52becd464aab0b1516a --- /dev/null +++ b/images/Shaft_01966.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72d68844ff6911d8bd6a224dee416cfdea2c011f843a308829de1a4e3859c823 +size 75326 diff --git a/images/Shaft_01967.png b/images/Shaft_01967.png new file mode 100644 index 0000000000000000000000000000000000000000..79d8e717deda3eaea688e696fece9f43c1fb1fc2 --- /dev/null +++ b/images/Shaft_01967.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29c1bf3735ccad3fbd91514390da6ac855086247a0a66caedb73051552696099 +size 80110 diff --git a/images/Shaft_01968.png b/images/Shaft_01968.png new file mode 100644 index 0000000000000000000000000000000000000000..6a9afe01b4c39e517589f6d20b94af1d8126c72c --- /dev/null +++ b/images/Shaft_01968.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c3aef9d0e679d3188ca60b04c1e4d6c2719ec0d62c73c00023f185f4843e34f +size 74934 diff --git a/images/Shaft_01969.png b/images/Shaft_01969.png new file mode 100644 index 0000000000000000000000000000000000000000..1f98743258991bdf9132bb70c3f171531a9e1132 --- /dev/null +++ b/images/Shaft_01969.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1df8243c96c1a422533fedcf6f6e95444499a5d9384874cf9ad48a77a598028 +size 83543 diff --git a/images/Shaft_01970.png b/images/Shaft_01970.png new file mode 100644 index 0000000000000000000000000000000000000000..91fe3fce07a5c60a7240dba41073c08bfefc5175 --- /dev/null +++ b/images/Shaft_01970.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4176449dc4cc71d45837efb7b7fd0954417617c89b50cbe3fb17532920ffb8c2 +size 77729 diff --git a/images/Shaft_01971.png b/images/Shaft_01971.png new file mode 100644 index 0000000000000000000000000000000000000000..3e796e20d4f6b45b59416e3d48a5c1a6de6b7809 --- /dev/null +++ b/images/Shaft_01971.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f44be2f51e28d973e84311cedbbd182749d144d9eb57af8c0d2bede29442d16c +size 67279 diff --git a/images/Shaft_01972.png b/images/Shaft_01972.png new file mode 100644 index 0000000000000000000000000000000000000000..96bb237269f141d0e70f748dd9497ecf1da70306 --- /dev/null +++ b/images/Shaft_01972.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41e5024f70b07fef088273c471b0fb46712bd7a3b0918129698036f17ff4c9c9 +size 73434 diff --git a/images/Shaft_01973.png b/images/Shaft_01973.png new file mode 100644 index 0000000000000000000000000000000000000000..21797ce32f99aff7dacac31b333accfd594deea8 --- /dev/null +++ b/images/Shaft_01973.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4adf634517e51ef5419c6ea4ef507cafcf94774167423a365b919c45ebdb3c25 +size 79673 diff --git a/images/Shaft_01974.png b/images/Shaft_01974.png new file mode 100644 index 0000000000000000000000000000000000000000..78c2957e3d8588b11cc0502ed14fc7b0fa6ee1f4 --- /dev/null +++ b/images/Shaft_01974.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e82c9f6410c62ce3ad5ea4f8380d3b72036ac17b5e0593c5c75ed5dc50fb724 +size 114760 diff --git a/images/Shaft_01975.png b/images/Shaft_01975.png new file mode 100644 index 0000000000000000000000000000000000000000..0bc56b5d0657e5c993616df3ed03cab598a45527 --- /dev/null +++ b/images/Shaft_01975.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27e0a9efbdc13dc02aec145399c1243c1a6adc41ae17c81a6afc5162dd607c8b +size 77415 diff --git a/images/Shaft_01976.png b/images/Shaft_01976.png new file mode 100644 index 0000000000000000000000000000000000000000..959e73d63881345cf54971cd76ad4d945d7b78d2 --- /dev/null +++ b/images/Shaft_01976.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0aebb1279e4a4da1c95652d9cc41eb19375a307054a3c097fb785e27d8d5a08c +size 97046 diff --git a/images/Shaft_01977.png b/images/Shaft_01977.png new file mode 100644 index 0000000000000000000000000000000000000000..115a81fc0ed12ca50d7187c715fb5afa8e98f392 --- /dev/null +++ b/images/Shaft_01977.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b852cc8e3c6fae527560a22201b972e30d1a6cda9503e2b050ad30e63692edad +size 83722 diff --git a/images/Shaft_01978.png b/images/Shaft_01978.png new file mode 100644 index 0000000000000000000000000000000000000000..ec37a7aeefdab80ad17169cc2f13d910e3eae181 --- /dev/null +++ b/images/Shaft_01978.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5e1477ecc77b0756644b7c731ac6a382d72b972cdb20a10ac52ab68fee4af4d +size 71084 diff --git a/images/Shaft_01979.png b/images/Shaft_01979.png new file mode 100644 index 0000000000000000000000000000000000000000..2a64b07f9f0b1f95f0d6e488482bd2740325d9ab --- /dev/null +++ b/images/Shaft_01979.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:380a850eb971069ca50e79868efccd5e42683b5a7918e52c4d97ef754c71a3b1 +size 66938 diff --git a/images/Shaft_01980.png b/images/Shaft_01980.png new file mode 100644 index 0000000000000000000000000000000000000000..033f9dfbabac3439115e6b7f39ecdb517f0fd661 --- /dev/null +++ b/images/Shaft_01980.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1ed453fc05f1bae6ee3fdba6f420baafe5017739823ef270798ea8513bc244d +size 95164 diff --git a/images/Shaft_01981.png b/images/Shaft_01981.png new file mode 100644 index 0000000000000000000000000000000000000000..2a2f62b415b867013cce0216c4a4b9851966e720 --- /dev/null +++ b/images/Shaft_01981.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f6ec088a6470520b1c821b10a153f9ac54347e94d071c1a3eb74192c826b0c4 +size 81575 diff --git a/images/Shaft_01982.png b/images/Shaft_01982.png new file mode 100644 index 0000000000000000000000000000000000000000..f82ab14458ea25485e049a50bc66480d990d8f98 --- /dev/null +++ b/images/Shaft_01982.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac5b9080e380592d720eeaecc53d6239504a83184a425ecb7ef7c18df16bde3c +size 73489 diff --git a/images/Shaft_01983.png b/images/Shaft_01983.png new file mode 100644 index 0000000000000000000000000000000000000000..9cd4e0d3c7af20efadbca65be85e99270ce32cf2 --- /dev/null +++ b/images/Shaft_01983.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2091d7f36962f272cef82542be9204e151dad6ba1dab13b4d9c773856dbd5c5c +size 97764 diff --git a/images/Shaft_01984.png b/images/Shaft_01984.png new file mode 100644 index 0000000000000000000000000000000000000000..7a0bf0fbbb127ac3503e8fe454d09af969f0e12d --- /dev/null +++ b/images/Shaft_01984.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cf3ad2c370bec9c8a4c4981536a7165a244d77bc392e312f4989a0fe345fdbe +size 84205 diff --git a/images/Shaft_01985.png b/images/Shaft_01985.png new file mode 100644 index 0000000000000000000000000000000000000000..89896b2fd7689dc296aaa9be75efc4384263cbeb --- /dev/null +++ b/images/Shaft_01985.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75d66dda8fbe66b6cf783bec660ad0e063fd623f6adb6a651ed735e97cce1a16 +size 69115 diff --git a/images/Shaft_01986.png b/images/Shaft_01986.png new file mode 100644 index 0000000000000000000000000000000000000000..9329320c4d88442360653702d72419443bca6a19 --- /dev/null +++ b/images/Shaft_01986.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f8765597cf96053e99f0dfff246627f3af49a45df3fe960fad4eccdd930e1f1 +size 86938 diff --git a/images/Shaft_01987.png b/images/Shaft_01987.png new file mode 100644 index 0000000000000000000000000000000000000000..d7f6220883dcabb347063870e0a63b72291191cb --- /dev/null +++ b/images/Shaft_01987.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:864febc46ce5e72d1044e8d154efe6a6919a613744f224f0e78dde6ed0bfd05b +size 78407 diff --git a/images/Shaft_01988.png b/images/Shaft_01988.png new file mode 100644 index 0000000000000000000000000000000000000000..dc087bab79a233944097f5311781f9d4dceb93d9 --- /dev/null +++ b/images/Shaft_01988.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61f8aba3127c216dfafb9ab8479a7e515aa82da67aaf37fb26bdf6bbaa2eabf7 +size 83761 diff --git a/images/Shaft_01989.png b/images/Shaft_01989.png new file mode 100644 index 0000000000000000000000000000000000000000..5cb683cd3b0e27b24cb84c205cb358a92ba4b726 --- /dev/null +++ b/images/Shaft_01989.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f4822eb63c5cf36c5c75adc353afb27bb9ac058b343f271ab778e5f8454eced +size 87741 diff --git a/images/Shaft_01990.png b/images/Shaft_01990.png new file mode 100644 index 0000000000000000000000000000000000000000..565e8575047c42f4c07fc1bbd4f570aac5ee8b12 --- /dev/null +++ b/images/Shaft_01990.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:568d8b5f3eb26fd17045c17ce824764be90114cd8c3d6dc9a8d70353fcf5030d +size 81045 diff --git a/images/Shaft_01991.png b/images/Shaft_01991.png new file mode 100644 index 0000000000000000000000000000000000000000..b1608b4b017fd7ddaf06ebde3cb5a8fce67ca540 --- /dev/null +++ b/images/Shaft_01991.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46dcbb20c01a7dddbe9b9f1e0bb5804bacb8f7fa9ec1a1c95aab6aa4114f8ae9 +size 83586 diff --git a/images/Shaft_01992.png b/images/Shaft_01992.png new file mode 100644 index 0000000000000000000000000000000000000000..222aa344a823bd38b3df4799cc322b42ba287301 --- /dev/null +++ b/images/Shaft_01992.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06390e9307c85a47111d048e8e18d61b9c66bdc3eedbe0f9ab94bd92af2bae8f +size 118049 diff --git a/images/Shaft_01993.png b/images/Shaft_01993.png new file mode 100644 index 0000000000000000000000000000000000000000..1a8f5701347aca3628d89914079499b55ee8e5e3 --- /dev/null +++ b/images/Shaft_01993.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:856ea0d4e3ac3df31732fbc3673be36eb11914ad9d666c1b9eef8fe891ba0bc5 +size 72636 diff --git a/images/Shaft_01994.png b/images/Shaft_01994.png new file mode 100644 index 0000000000000000000000000000000000000000..9358ce218ee0c3dd72b1fb45203a01534b537f6b --- /dev/null +++ b/images/Shaft_01994.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff77926580dbce3aee4ffd96aa250813dcd8d08ac82d15be5466626b9528c86d +size 89421 diff --git a/images/Shaft_01995.png b/images/Shaft_01995.png new file mode 100644 index 0000000000000000000000000000000000000000..b77ec288b2ce6ea377b9a9b28ef68448bdd8cf24 --- /dev/null +++ b/images/Shaft_01995.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfb5cbd57adea6ac331fb3fcd5d75a955d13d6a56210fe913810e865920adfe4 +size 96742 diff --git a/images/Shaft_01996.png b/images/Shaft_01996.png new file mode 100644 index 0000000000000000000000000000000000000000..24bcb6ff3d8c76e802bc801daca6f856d4a8f284 --- /dev/null +++ b/images/Shaft_01996.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f3bdc7785da2319b7b0efe32ce2d67a842659a8260ff2694fa36d607530460b +size 80525 diff --git a/images/Shaft_01997.png b/images/Shaft_01997.png new file mode 100644 index 0000000000000000000000000000000000000000..438e30e216e9196c3fd5318c072ac7a6023a5eee --- /dev/null +++ b/images/Shaft_01997.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88e16eca1b7c3c33314a33729a9e0a51554fd98ac14eba02a105e963f5591c2d +size 94280 diff --git a/images/Shaft_01998.png b/images/Shaft_01998.png new file mode 100644 index 0000000000000000000000000000000000000000..39d0057902edb53b20cbcc5758b28e2c31e9c1c0 --- /dev/null +++ b/images/Shaft_01998.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c68256ef6003a9273a0609f049a4fbbabdf7aabb5d9f02c19c92b3dc9bb7cd84 +size 97063 diff --git a/images/Shaft_01999.png b/images/Shaft_01999.png new file mode 100644 index 0000000000000000000000000000000000000000..8e8769d7ea0c8e36103600ed9aa9880790c13b04 --- /dev/null +++ b/images/Shaft_01999.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ae026e17b14021ae42d55cabb2b38fa9c8f47636a01e6931e22954457ccea18 +size 85457 diff --git a/images/Shaft_02000.png b/images/Shaft_02000.png new file mode 100644 index 0000000000000000000000000000000000000000..52c91c9d1096e53c1b7708aedb1b6b7f2302a452 --- /dev/null +++ b/images/Shaft_02000.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00eb4fdc5024123c7596ec3cd4070bb713ed7edd343ea31bfc9e5151b1b39faa +size 113856 diff --git a/images/Shaft_02001.png b/images/Shaft_02001.png new file mode 100644 index 0000000000000000000000000000000000000000..97c5c5e4a7aaccbface4ccffa9271c53803efd2f --- /dev/null +++ b/images/Shaft_02001.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f65d911d5ce4d0b5bfb07b306b5839b096fcca33d40e18857e27cfc3d1e03f61 +size 98211 diff --git a/images/Shaft_02002.png b/images/Shaft_02002.png new file mode 100644 index 0000000000000000000000000000000000000000..7d9f6f12bf499d680461cb03a031caed4e4ce277 --- /dev/null +++ b/images/Shaft_02002.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a6535ae42bcf23f4dc8a3560c901ed6d29eed0ee77ce235652fcc1e8c4fedd7 +size 74354 diff --git a/images/Shaft_02003.png b/images/Shaft_02003.png new file mode 100644 index 0000000000000000000000000000000000000000..be68a5a818744b61abe80e36777d5990dddce4f2 --- /dev/null +++ b/images/Shaft_02003.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d549bf6fc9979ef0915d6a6aab84d65107b4066a6e6541152786355872477fc2 +size 87856 diff --git a/images/Shaft_02004.png b/images/Shaft_02004.png new file mode 100644 index 0000000000000000000000000000000000000000..b181b63ff35f32affbac021bb06029e75abffd97 --- /dev/null +++ b/images/Shaft_02004.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c07d1b3a1507a893c7280c9a1f68b7d8cfc689bdf23bce8cf175ef9b7e52f436 +size 98173 diff --git a/images/Shaft_02005.png b/images/Shaft_02005.png new file mode 100644 index 0000000000000000000000000000000000000000..fee740fe94a5a78c1bbbc0d28dcd954515535904 --- /dev/null +++ b/images/Shaft_02005.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:725a5517838336123ed86f3f6019d901c3e5332418d5ced79b9d74b59515d37f +size 78537 diff --git a/images/Shaft_02006.png b/images/Shaft_02006.png new file mode 100644 index 0000000000000000000000000000000000000000..9625a916d44fc101c988fc7c285b64bc91661b4b --- /dev/null +++ b/images/Shaft_02006.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c26d9b00f8013a55dc951a21e463be1ccaf017a1475f725eea22a6a508441fd9 +size 102788 diff --git a/images/Shaft_02007.png b/images/Shaft_02007.png new file mode 100644 index 0000000000000000000000000000000000000000..5cb18f6a951cc6515d41fcc3b78752350f2d05f2 --- /dev/null +++ b/images/Shaft_02007.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa87c09a1ec52b50d11a14626d1ff81b557369de09a3ba5be99a61c0d164f22d +size 72038 diff --git a/images/Shaft_02008.png b/images/Shaft_02008.png new file mode 100644 index 0000000000000000000000000000000000000000..d7356deec7a6276afd0be670f5857c1d87bea6d0 --- /dev/null +++ b/images/Shaft_02008.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8654fd4a3d2a23c15ea8481ab528567f00ff94b4bb3199290ff408f58777b58a +size 76819 diff --git a/images/Shaft_02009.png b/images/Shaft_02009.png new file mode 100644 index 0000000000000000000000000000000000000000..d325615317d6897af583cd505bfe2840a57085fa --- /dev/null +++ b/images/Shaft_02009.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:384bc1ea172c6bef7a6eee7e530a6f680cceee956de0cc9c2d0e082a085a65c6 +size 103770 diff --git a/images/Shaft_02010.png b/images/Shaft_02010.png new file mode 100644 index 0000000000000000000000000000000000000000..6f77e5487ad59888156333bc6f66c554f82ee33e --- /dev/null +++ b/images/Shaft_02010.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7dcb18a3cbc3e313971786de7f3587cc336d896e88c95f8f1e9cc3b2b5cf559f +size 107284 diff --git a/images/Shaft_02011.png b/images/Shaft_02011.png new file mode 100644 index 0000000000000000000000000000000000000000..014897e3643028ca287785606f379e6c3e031420 --- /dev/null +++ b/images/Shaft_02011.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccefc61e8abf086b3a1063dc42458fed3e21aea654d1141f7fe76b250c6549d2 +size 100038 diff --git a/images/Shaft_02012.png b/images/Shaft_02012.png new file mode 100644 index 0000000000000000000000000000000000000000..b3425337213565c8930a1143eed205a2b9c5eb72 --- /dev/null +++ b/images/Shaft_02012.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe59e4dda902574a11747c5a134c101be59e0c50984404b0f2c89eec7d4e01f7 +size 80965 diff --git a/images/Shaft_02013.png b/images/Shaft_02013.png new file mode 100644 index 0000000000000000000000000000000000000000..868aeb313a5c2922f15fcebae10930ae6996dfe6 --- /dev/null +++ b/images/Shaft_02013.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fc2c6e7c8add2c34cb66a73cedceb603471d8c9c0f5d03d552c8514e6a32368 +size 82578 diff --git a/images/Shaft_02014.png b/images/Shaft_02014.png new file mode 100644 index 0000000000000000000000000000000000000000..aedcb34626fe4dc3ec2529839dc4444c90d49696 --- /dev/null +++ b/images/Shaft_02014.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe9c7b22058ed753d7a7ea20c9d7b25dc0bc5cbdf8c9504ad6c1694d5d7d01fc +size 86065 diff --git a/images/Shaft_02015.png b/images/Shaft_02015.png new file mode 100644 index 0000000000000000000000000000000000000000..d6f853fef826c2c225823c65d3522b77ba75fb3e --- /dev/null +++ b/images/Shaft_02015.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:939318f12ed8740bb862140325707de7d02c000fbc48d8adfb0cca0407b40d50 +size 84278 diff --git a/images/Shaft_02016.png b/images/Shaft_02016.png new file mode 100644 index 0000000000000000000000000000000000000000..bdd7f4e5f86aa4bb95aa080cd01a2e6be473a6d0 --- /dev/null +++ b/images/Shaft_02016.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:711469992de60aaece6860753376db0d4d93126e1608f4ecd46c4b5fecf8b70b +size 82102 diff --git a/images/Shaft_02017.png b/images/Shaft_02017.png new file mode 100644 index 0000000000000000000000000000000000000000..6d4ece8f200134c97779a504c4d47ee9141832a5 --- /dev/null +++ b/images/Shaft_02017.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:247312758d7190769daeafd225de0ebdb84711e31df127065e084ca3338a504d +size 76219 diff --git a/images/Shaft_02018.png b/images/Shaft_02018.png new file mode 100644 index 0000000000000000000000000000000000000000..c2cb194d4d09e1aff59889170a4a4b184df16a0c --- /dev/null +++ b/images/Shaft_02018.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53a1022e24d8f574863d0d95f26f32352014ebc65fea0a42a40111a92f65a945 +size 68527 diff --git a/images/Shaft_02019.png b/images/Shaft_02019.png new file mode 100644 index 0000000000000000000000000000000000000000..b63512b4cd3233329c8f0b17ffd8b51f5029ca80 --- /dev/null +++ b/images/Shaft_02019.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5cb2d06c508f95a11886e6cdb07a21b2cb30871dd5345ee542dc8bcd91bc12c0 +size 88785 diff --git a/images/Shaft_02020.png b/images/Shaft_02020.png new file mode 100644 index 0000000000000000000000000000000000000000..a31657ce9a91626c7bc067f7842e0ca5d376f08b --- /dev/null +++ b/images/Shaft_02020.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63ea2105ee5ab88ad40890dca5c6ebe4094a602f77a2f925dbb16ed575c9c988 +size 95439 diff --git a/images/Shaft_02021.png b/images/Shaft_02021.png new file mode 100644 index 0000000000000000000000000000000000000000..11120f578a3b03472c91d8e6c123d5c4f50c0aa3 --- /dev/null +++ b/images/Shaft_02021.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7eb758b463291d6961bc577e724061023c943d861f8bc40976c52785b4f2751 +size 84044 diff --git a/images/Shaft_02022.png b/images/Shaft_02022.png new file mode 100644 index 0000000000000000000000000000000000000000..d18cae80c7e4734d8deb17648c05a3ab6dcf6853 --- /dev/null +++ b/images/Shaft_02022.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ead9ddf5da917c0bc2ed147525a84fc0ed7ddfb68d2da4a23e1b62391704948e +size 93716 diff --git a/images/Shaft_02023.png b/images/Shaft_02023.png new file mode 100644 index 0000000000000000000000000000000000000000..06aa3a8065127f6c52e27d073b92b727ec72bb39 --- /dev/null +++ b/images/Shaft_02023.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d9aa3fac0241ab3b0d4145bf8c0974140c7194977573a208bb2567c28f4f628 +size 69104 diff --git a/images/Shaft_02024.png b/images/Shaft_02024.png new file mode 100644 index 0000000000000000000000000000000000000000..f058c010f482a855deed72c4a9a4670f80cc62f8 --- /dev/null +++ b/images/Shaft_02024.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57ce390f2023b97237e1534c837a9a3eec04ca517e4e6432a0bb8a5fc4ee6855 +size 73536 diff --git a/images/Shaft_02025.png b/images/Shaft_02025.png new file mode 100644 index 0000000000000000000000000000000000000000..1f337440bcb2e8a181bd36b356ba0379f56d3c64 --- /dev/null +++ b/images/Shaft_02025.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6488d903a20d5a7d0b763d76d0c69c82c0c5b6f47c4b2cd7cb9cee4d805bd7f +size 81151 diff --git a/images/Shaft_02026.png b/images/Shaft_02026.png new file mode 100644 index 0000000000000000000000000000000000000000..d39df8ef8ab4b8a75d863737f7c8b0954d641f5e --- /dev/null +++ b/images/Shaft_02026.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6548db5614d4797b32f871b1ecc5c504c1adcaa608f4494719efbeb6b0cca48 +size 117234 diff --git a/images/Shaft_02027.png b/images/Shaft_02027.png new file mode 100644 index 0000000000000000000000000000000000000000..d391590e396ddf0d94af66b1c26903ab5da87cbe --- /dev/null +++ b/images/Shaft_02027.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce3cf6fd7e8806ea4b0fdd8c8f7bd93c4290185a2de510838fb690948e985c08 +size 95936 diff --git a/images/Shaft_02028.png b/images/Shaft_02028.png new file mode 100644 index 0000000000000000000000000000000000000000..cd31a96ed1b86866f7704cae0c1c4a6eb8c09980 --- /dev/null +++ b/images/Shaft_02028.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b424a0c72fa2c9252dcbc13bb9cff76a1c4be4eed5f8ac9ddef0eb8af19c0b92 +size 73638 diff --git a/images/Shaft_02029.png b/images/Shaft_02029.png new file mode 100644 index 0000000000000000000000000000000000000000..0f1569d7438fd09e0c4064877e9aa4eeb7c8be04 --- /dev/null +++ b/images/Shaft_02029.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:209fcf67ea896ea2b6b6315d293234d4feab6568fa77ea80a340b613cfaab8a7 +size 111200 diff --git a/images/Shaft_02030.png b/images/Shaft_02030.png new file mode 100644 index 0000000000000000000000000000000000000000..4fdc1b089f0d414401b0683c8a4ac2a088d5890b --- /dev/null +++ b/images/Shaft_02030.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c24ab40c788a434aefa049651c112348616aaf089e28f4ad7caacf48b279fe7e +size 71977 diff --git a/images/Shaft_02031.png b/images/Shaft_02031.png new file mode 100644 index 0000000000000000000000000000000000000000..ee36e9c7a2d1c86f82570da5b31de52e8daf77a2 --- /dev/null +++ b/images/Shaft_02031.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:146322354a92567c57003027a0800806f49e589bc7cd6bafa5d3fecd50d5c3fb +size 82704 diff --git a/images/Shaft_02032.png b/images/Shaft_02032.png new file mode 100644 index 0000000000000000000000000000000000000000..d94d6735745a064f08fc79aebab0fb4cd4689f26 --- /dev/null +++ b/images/Shaft_02032.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e653392dc2f27aae9c10a0bedd0ed724364b4fa57a55b5396b6b3164a8d0dbf +size 97523 diff --git a/images/Shaft_02033.png b/images/Shaft_02033.png new file mode 100644 index 0000000000000000000000000000000000000000..cc9ef688918b3102f812a69eac72901d9a42e1e4 --- /dev/null +++ b/images/Shaft_02033.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6be60eef7652ba3827deb710ddabaec388e7e2aba3839109b4f186250e9a3b4 +size 99719 diff --git a/images/Shaft_02034.png b/images/Shaft_02034.png new file mode 100644 index 0000000000000000000000000000000000000000..a70d282724e8967fdf34713c772eda921ff74b7a --- /dev/null +++ b/images/Shaft_02034.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e583a3b831cc51617125fc1756bea45606619fdf69a9acf9886262c7b6cf708 +size 67969 diff --git a/images/Shaft_02035.png b/images/Shaft_02035.png new file mode 100644 index 0000000000000000000000000000000000000000..5f0e7d13c208e39072683262c142a4a53e59dc96 --- /dev/null +++ b/images/Shaft_02035.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f75e2fe6b568ce290cb4eaf386e5696515629325d11649e7bdcbeddec5d88bd6 +size 110742 diff --git a/images/Shaft_02036.png b/images/Shaft_02036.png new file mode 100644 index 0000000000000000000000000000000000000000..bd4ea00482387df5d8cead4c2e4f6765e316b6a0 --- /dev/null +++ b/images/Shaft_02036.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8d4a2bebefa4281887c387cac090c40046fb52d3450e3e05f5a227879ba88d9 +size 88583 diff --git a/images/Shaft_02037.png b/images/Shaft_02037.png new file mode 100644 index 0000000000000000000000000000000000000000..d12951a4eb2adcbf5bfc6a21acb4b7fd69d98fc3 --- /dev/null +++ b/images/Shaft_02037.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d3a13ed65158aed84f8d5acbfe140e806e807d984e18e47ca3b15f4682bf806 +size 109625 diff --git a/images/Shaft_02038.png b/images/Shaft_02038.png new file mode 100644 index 0000000000000000000000000000000000000000..0ed0c02021f1bddc69e1d8a2646d4632ecaf23ca --- /dev/null +++ b/images/Shaft_02038.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d438345ef9393df3ef1315199033738563201514e1daf4e8e5dd82e7ff216c4b +size 96670 diff --git a/images/Shaft_02039.png b/images/Shaft_02039.png new file mode 100644 index 0000000000000000000000000000000000000000..cc37a28b7383a16f93ae903588b68fcdfc288426 --- /dev/null +++ b/images/Shaft_02039.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8258a11ace4f375163ef02e74cc9e3c3faf4bdffe3b7aef3f076a485840321fb +size 94209 diff --git a/images/Shaft_02040.png b/images/Shaft_02040.png new file mode 100644 index 0000000000000000000000000000000000000000..48847b715493bb8db7c2b386d84cee04b50fd878 --- /dev/null +++ b/images/Shaft_02040.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d738b6cbd0047f4465de074e4d39ade51212df5848761379d14aa11824d189a +size 86909 diff --git a/images/Shaft_02041.png b/images/Shaft_02041.png new file mode 100644 index 0000000000000000000000000000000000000000..cf574799cdcf6c371e873529d5ded3698c08e03b --- /dev/null +++ b/images/Shaft_02041.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2ba3ccd08b1e8c9386b34be4616de25e769860cd1b9f9a7504661bab158cee8 +size 89809 diff --git a/images/Shaft_02042.png b/images/Shaft_02042.png new file mode 100644 index 0000000000000000000000000000000000000000..a9fddedd8781085ee3e4b9f15d2208de5c0d741a --- /dev/null +++ b/images/Shaft_02042.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:487201cdcba788540b70821aa021d09823d6bfa8a62ec44946e1b5b11d82d208 +size 95435 diff --git a/images/Shaft_02043.png b/images/Shaft_02043.png new file mode 100644 index 0000000000000000000000000000000000000000..0fb95be5caf9455ee715812600a054fb54546842 --- /dev/null +++ b/images/Shaft_02043.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ed121883e07272624a865555fc48a7e69e96324bd4a3a95e4f9a1c977d73c9f +size 70256 diff --git a/images/Shaft_02044.png b/images/Shaft_02044.png new file mode 100644 index 0000000000000000000000000000000000000000..64b9533de73952ff389a40c672856c363f7ec7ec --- /dev/null +++ b/images/Shaft_02044.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8f9526b1abb3ece14096aa2829061f5e1bbf4c42cc488aa3fbaa220edcaa36b +size 70983 diff --git a/images/Shaft_02045.png b/images/Shaft_02045.png new file mode 100644 index 0000000000000000000000000000000000000000..553fe109ce955f69ae3889c03e44e20016d7bfee --- /dev/null +++ b/images/Shaft_02045.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d65d2742dafb6795f0b3e9837ee2704521ffe35ff5dacb6d856e75f8ce5bd28e +size 93667 diff --git a/images/Shaft_02046.png b/images/Shaft_02046.png new file mode 100644 index 0000000000000000000000000000000000000000..3a266f6d1f78e55f953f5e87a468bb58d7c09fd4 --- /dev/null +++ b/images/Shaft_02046.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4719e8b7b8a4ad6be9c1cfca3176e397502f39cead24b55a9323eb7d6a78a0c1 +size 83205 diff --git a/images/Shaft_02047.png b/images/Shaft_02047.png new file mode 100644 index 0000000000000000000000000000000000000000..a0936140c059383ddd0f124f74195b12c8b68a8e --- /dev/null +++ b/images/Shaft_02047.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82742ea775da4041aadf7f95996a9a2b3210a42d2d5353ad9ee3add980c07514 +size 91058 diff --git a/images/Shaft_02048.png b/images/Shaft_02048.png new file mode 100644 index 0000000000000000000000000000000000000000..6b702e86ef34ba34ac9d079495c5eb5db6a203dc --- /dev/null +++ b/images/Shaft_02048.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b92336e7c3baac9259268fb566b0bf35376b22428e1109b715186341752a288 +size 93712 diff --git a/images/Shaft_02049.png b/images/Shaft_02049.png new file mode 100644 index 0000000000000000000000000000000000000000..9415a78193e97c4df34d866fd45cbf901fb1691a --- /dev/null +++ b/images/Shaft_02049.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bbcd551cbc90473e9badbb5a01109e74c93cf82e5605f77843c9c5717020547 +size 82282 diff --git a/images/Shaft_02050.png b/images/Shaft_02050.png new file mode 100644 index 0000000000000000000000000000000000000000..01634d7a8a7510bf5bd6e052457d0099c290561b --- /dev/null +++ b/images/Shaft_02050.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85c01004b0deaf485d12df0d499614d608971952e5bd7dfa4da0047f9d6bd5c3 +size 76057 diff --git a/images/Shaft_02051.png b/images/Shaft_02051.png new file mode 100644 index 0000000000000000000000000000000000000000..fd0f64d0fb7c7b8440dc3e249a7a7d7d88c6b884 --- /dev/null +++ b/images/Shaft_02051.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f24b4a94e9addb6a148e223f5c87c96b209a1df1c02d6f641fdb0fad37fe2a98 +size 108767 diff --git a/images/Shaft_02052.png b/images/Shaft_02052.png new file mode 100644 index 0000000000000000000000000000000000000000..f2c7a2066a4bc3c7f1dbde8ac5db4fe2921cac87 --- /dev/null +++ b/images/Shaft_02052.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70f47c0355dad445c4327af8a81b4e35558333fe4b2b17378f6d92271475af5a +size 94749 diff --git a/images/Shaft_02053.png b/images/Shaft_02053.png new file mode 100644 index 0000000000000000000000000000000000000000..241b0a344a6f222d4633ecf400454241590c00e3 --- /dev/null +++ b/images/Shaft_02053.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94b41632e9c54e88facd9e3c1f614d597a08f8eb522ca916f79d1db0d92e1338 +size 77735 diff --git a/images/Shaft_02054.png b/images/Shaft_02054.png new file mode 100644 index 0000000000000000000000000000000000000000..f1ad26f468706d1c25bb4b781d174f43bac11290 --- /dev/null +++ b/images/Shaft_02054.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2eacefcf7c36aa9fa64ca3edad07bf8f41784187d7b7d83daae2ba5ff680968b +size 83362 diff --git a/images/Shaft_02055.png b/images/Shaft_02055.png new file mode 100644 index 0000000000000000000000000000000000000000..3659ca0a6b8f4a9d86026b02f526d9bc0b0d8337 --- /dev/null +++ b/images/Shaft_02055.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3928dfb70a6714418db6bcdaf9299e70e7ce2a460a8506f3223ef1ce3f06ddb8 +size 91687 diff --git a/images/Shaft_02056.png b/images/Shaft_02056.png new file mode 100644 index 0000000000000000000000000000000000000000..45db97ab14ff652966a5307acc786b466c69af8e --- /dev/null +++ b/images/Shaft_02056.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e13e514fb6cf0bfbed2de2413d0a4a67cd76d77e6f775466232c762374291018 +size 69693 diff --git a/images/Shaft_02057.png b/images/Shaft_02057.png new file mode 100644 index 0000000000000000000000000000000000000000..d3f8acc5421dda06fc0d40ba2f456afe8f613422 --- /dev/null +++ b/images/Shaft_02057.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d508fd85d8a2a2de6aa135ce71307e9e3269b47b09e988c9dead19587afae65 +size 70959 diff --git a/images/Shaft_02058.png b/images/Shaft_02058.png new file mode 100644 index 0000000000000000000000000000000000000000..b99fd861b8917c85638d3c6fae35191b39e63527 --- /dev/null +++ b/images/Shaft_02058.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:958ecff8a6ae14948e4026b16aaa84d038aa8442578aec2b05f545d74b09463f +size 71335 diff --git a/images/Shaft_02059.png b/images/Shaft_02059.png new file mode 100644 index 0000000000000000000000000000000000000000..9db079420eaeb86855dbc83dc704b3234b73fef7 --- /dev/null +++ b/images/Shaft_02059.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ae00182c3396d5af4a2ba6f24015cdeb8872f5cdb7c7a64c411dae34366cdcd +size 87084 diff --git a/images/Shaft_02060.png b/images/Shaft_02060.png new file mode 100644 index 0000000000000000000000000000000000000000..30f129fa172bc456010bc49541a691712bd217af --- /dev/null +++ b/images/Shaft_02060.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a03afcdb03f76905e39ed95e683bb45e71dc9623302d9cf6d6b218b689ab5e43 +size 73437 diff --git a/images/Shaft_02061.png b/images/Shaft_02061.png new file mode 100644 index 0000000000000000000000000000000000000000..ddcd18f093c7a780cf99ab00fb624461c8eeb1dc --- /dev/null +++ b/images/Shaft_02061.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30eab270b3dcd4cab389e0eb88d548f1f46c21a6e959819abc13f9a3c080621d +size 79503 diff --git a/images/Shaft_02062.png b/images/Shaft_02062.png new file mode 100644 index 0000000000000000000000000000000000000000..992af92d70628d4b3ecdd0dcecb08ccbfd90988e --- /dev/null +++ b/images/Shaft_02062.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a900e833da9df31ab959f2ec913d998abaee07d9b39504b1813e9127411d19e +size 106742 diff --git a/images/Shaft_02063.png b/images/Shaft_02063.png new file mode 100644 index 0000000000000000000000000000000000000000..a141b600c10821f765c8a1120b2dba7b45b7fb8a --- /dev/null +++ b/images/Shaft_02063.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0121fd81cce0f965691d10f2f15ac852c3ac62e63eea1fac75e8da6b68f49983 +size 82847 diff --git a/images/Shaft_02064.png b/images/Shaft_02064.png new file mode 100644 index 0000000000000000000000000000000000000000..02ac65ce9073e1dca5d5908b187f854fc9684671 --- /dev/null +++ b/images/Shaft_02064.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90d5c7e555338964f370a49ca2c10e4b9cc845be696b8b1d4e8b312b1f7becc1 +size 78607 diff --git a/images/Shaft_02065.png b/images/Shaft_02065.png new file mode 100644 index 0000000000000000000000000000000000000000..7d624904c16b2ab8a074dbbbda150b2a287fbb37 --- /dev/null +++ b/images/Shaft_02065.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27b0a38b44536968b5653408df08e511821f925eca23e972e92e5f03bbc186c9 +size 88140 diff --git a/images/Shaft_02066.png b/images/Shaft_02066.png new file mode 100644 index 0000000000000000000000000000000000000000..f37f16b7540be88b5cf9780d728935275858c8f8 --- /dev/null +++ b/images/Shaft_02066.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6dbadf88cd5d286e5fd3e8c990cfbb2d4491cd6ac53221f3bc06ce316562bdda +size 74792 diff --git a/images/Shaft_02067.png b/images/Shaft_02067.png new file mode 100644 index 0000000000000000000000000000000000000000..06cdd3ae58ef07fbd284d116517e2535c07af9fb --- /dev/null +++ b/images/Shaft_02067.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4983f5e3fcb193fd18e7dd3a7e4186819af77c930402f7b843e5fcf058e9a78 +size 83365 diff --git a/images/Shaft_02068.png b/images/Shaft_02068.png new file mode 100644 index 0000000000000000000000000000000000000000..077a0172cf9bad72a54fb2b5328b706ac166e239 --- /dev/null +++ b/images/Shaft_02068.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73fc15295a3108693bf4458be2c11c7968b38fea8a0d53d4e0c23c6280f700cd +size 92932 diff --git a/images/Shaft_02069.png b/images/Shaft_02069.png new file mode 100644 index 0000000000000000000000000000000000000000..4049cb9d92f9393c85eba97daa3147da5b7f0ed3 --- /dev/null +++ b/images/Shaft_02069.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac46fb17e8090b1139c471822af8d63e2f5db11f2d824b9f2a1ab3281339feb1 +size 76544 diff --git a/images/Shaft_02070.png b/images/Shaft_02070.png new file mode 100644 index 0000000000000000000000000000000000000000..7a489f7c7d39bc14c834dc631cb535b481d7485d --- /dev/null +++ b/images/Shaft_02070.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bffec6c3803bdb37c8e248b5afe37474c96eadd6ce5b5136915f35fbf422b68f +size 75774 diff --git a/images/Shaft_02071.png b/images/Shaft_02071.png new file mode 100644 index 0000000000000000000000000000000000000000..3ddabdfcae7a5742003cc5a8ef42b37768fa48fa --- /dev/null +++ b/images/Shaft_02071.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b49fd95ba67da1512e173c079f217b3d4bba9482673875c3c8da3e9d25280823 +size 81097 diff --git a/images/Shaft_02072.png b/images/Shaft_02072.png new file mode 100644 index 0000000000000000000000000000000000000000..1dc6d807d8ecfa2145d53d0d82f0eff19bb88c01 --- /dev/null +++ b/images/Shaft_02072.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e5656e7df772351f5f189e97889ca9b80af5db3b2f5361b476944b76b31ac38 +size 91553 diff --git a/images/Shaft_02073.png b/images/Shaft_02073.png new file mode 100644 index 0000000000000000000000000000000000000000..c475b7b3a04a982b557f3e7d905a200c95ce6f92 --- /dev/null +++ b/images/Shaft_02073.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78276deaf8d8354f7c7e986ce7fd16c9c79f57eeafa34c35c9ce10f6f0fe3db3 +size 74309 diff --git a/images/Shaft_02074.png b/images/Shaft_02074.png new file mode 100644 index 0000000000000000000000000000000000000000..281021f8722fd7d96d83444a409eff441402f21c --- /dev/null +++ b/images/Shaft_02074.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6ed826afbfdbfad55ea662146eb58221cd798aba38a239a46635985ace832ab +size 89024 diff --git a/images/Shaft_02075.png b/images/Shaft_02075.png new file mode 100644 index 0000000000000000000000000000000000000000..715078a10ce82c7e6ba608896cb3c130d5be0ea0 --- /dev/null +++ b/images/Shaft_02075.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12fc3f5dc8868a24be8ec3df0f7c3cab8fbed5cf0f07e347473c19a372788ce9 +size 85059 diff --git a/images/Shaft_02076.png b/images/Shaft_02076.png new file mode 100644 index 0000000000000000000000000000000000000000..473f81bb27d4ed6cf97a778bb21910430241b871 --- /dev/null +++ b/images/Shaft_02076.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2d50028d40221619931f19bc4846a443c598715000173d7c74ffc3b504381e9 +size 90080 diff --git a/images/Shaft_02077.png b/images/Shaft_02077.png new file mode 100644 index 0000000000000000000000000000000000000000..b028fba701209e0efff8760b3cdef9c9134cc787 --- /dev/null +++ b/images/Shaft_02077.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0aa90bf3e5f0a7c1f0ca674c8028314dfe24ea1faa979c7c2025ae72d9f0118b +size 99781 diff --git a/images/Shaft_02078.png b/images/Shaft_02078.png new file mode 100644 index 0000000000000000000000000000000000000000..5ca09c6d254870528e2fcd618f513eab14b0bc68 --- /dev/null +++ b/images/Shaft_02078.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8765aaaaf62058a4fccf6a83983c60d9fb99086c9bfd31468345756460eba3a +size 110306 diff --git a/images/Shaft_02079.png b/images/Shaft_02079.png new file mode 100644 index 0000000000000000000000000000000000000000..1086fa6e0dfa39234248c52933989f5587a93f7c --- /dev/null +++ b/images/Shaft_02079.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8dfb00e3f8eb4d0ad98d07aa9f2bb40a466fc3bd55d2a3f9f11e632c3efcdf8b +size 85964 diff --git a/images/Shaft_02080.png b/images/Shaft_02080.png new file mode 100644 index 0000000000000000000000000000000000000000..1353f303004fee00bf642592aecfefea0375b73b --- /dev/null +++ b/images/Shaft_02080.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f5805dbf9e244a7f43ce3d9221b6e6b7bcf4defe9054ad7037c9281e3d14cf9 +size 106883 diff --git a/images/Shaft_02081.png b/images/Shaft_02081.png new file mode 100644 index 0000000000000000000000000000000000000000..8f8c54a396c215a8d5b930be82ec9d4fbbe579e6 --- /dev/null +++ b/images/Shaft_02081.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b376106e6b7136c6bf6ac47b9c32631407c82023c7123c4f5bd807630d18c24f +size 88472 diff --git a/images/Shaft_02082.png b/images/Shaft_02082.png new file mode 100644 index 0000000000000000000000000000000000000000..15f6dab163aa23e7df53d31860020c1c65a2c7b8 --- /dev/null +++ b/images/Shaft_02082.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:278101fb09a2f0f47bcc398e03bcd3c3b6ddd15a06d74c5cfd7d1d59c8608a75 +size 101830 diff --git a/images/Shaft_02083.png b/images/Shaft_02083.png new file mode 100644 index 0000000000000000000000000000000000000000..0426acc1265bd5a69bc221fdf18fb13e13045f24 --- /dev/null +++ b/images/Shaft_02083.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5221d2507f2723efde9651b4d493d5b75789f627927efad12cdbf5f7cc1f4086 +size 80045 diff --git a/images/Shaft_02084.png b/images/Shaft_02084.png new file mode 100644 index 0000000000000000000000000000000000000000..b44fd6ea0e617c0ebd7fcdec74aa65dc29c7e02f --- /dev/null +++ b/images/Shaft_02084.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce4c1a89ce1a1926055aa02214fd52f683ec685df5acad7b0bfc95bed75a8797 +size 70234 diff --git a/images/Shaft_02085.png b/images/Shaft_02085.png new file mode 100644 index 0000000000000000000000000000000000000000..33e2bd95a482579a9b53c74bbce1a3237bd190ff --- /dev/null +++ b/images/Shaft_02085.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62cfa813808c5fcb13aa3d492071b59138110946e65b9b0715ef86dcef323a0f +size 88554 diff --git a/images/Shaft_02086.png b/images/Shaft_02086.png new file mode 100644 index 0000000000000000000000000000000000000000..aaca62b0a3542d0ad27cdff93579c098b7bae37e --- /dev/null +++ b/images/Shaft_02086.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7b1529ee1b42a81d091e976eda12c7789f8d0620a025a3ac293fe4fe2b6128a +size 109477 diff --git a/images/Shaft_02087.png b/images/Shaft_02087.png new file mode 100644 index 0000000000000000000000000000000000000000..4221d1c5f388668436a8c6961ddac0a352e734bc --- /dev/null +++ b/images/Shaft_02087.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e1a85f9702abf4379634774625df8839a6f72e015aee865497385912126f457 +size 105909 diff --git a/images/Shaft_02088.png b/images/Shaft_02088.png new file mode 100644 index 0000000000000000000000000000000000000000..6ee07844df06b83fbe4cdf889ac4d9f260b92166 --- /dev/null +++ b/images/Shaft_02088.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cbfc97bcf9c8cad8531369f6b977649a9eb4483747f7a9d9ff75ee80b68db71 +size 75104 diff --git a/images/Shaft_02089.png b/images/Shaft_02089.png new file mode 100644 index 0000000000000000000000000000000000000000..a3ca1689831b7a1cebb87420c1098fce08456886 --- /dev/null +++ b/images/Shaft_02089.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33b4b7a7868d68b8f9e18221049ca19e71ebda0d454f0c5d2467d641e060e63d +size 84553 diff --git a/images/Shaft_02090.png b/images/Shaft_02090.png new file mode 100644 index 0000000000000000000000000000000000000000..f04e87f24dc13debc2c1ee0d6dfb1b88880c0afb --- /dev/null +++ b/images/Shaft_02090.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f2ff05e22126a7ed8a727c62fbfc335781469406c7363de6307d3f1f6787f6f +size 84697 diff --git a/images/Shaft_02091.png b/images/Shaft_02091.png new file mode 100644 index 0000000000000000000000000000000000000000..229bbfe6e4ea05c3f97900ec028a8d895c7dceb4 --- /dev/null +++ b/images/Shaft_02091.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c2249cdcb3cfd022975a3be556027e4962e56d45084e77fc6a7afd61120df9c +size 82765 diff --git a/images/Shaft_02092.png b/images/Shaft_02092.png new file mode 100644 index 0000000000000000000000000000000000000000..83c5c9f98286490ffe19b6de314730beb2fb567a --- /dev/null +++ b/images/Shaft_02092.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69ba157968a13aa02aa5efd0901b211db87b2483301f700ef253378132fb6499 +size 69445 diff --git a/images/Shaft_02093.png b/images/Shaft_02093.png new file mode 100644 index 0000000000000000000000000000000000000000..3f070cf5115e303f403a590e26bc1976a9f3f4ba --- /dev/null +++ b/images/Shaft_02093.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:568f288e40f017faf82c807598e5fefb6f2b26adee3ad8cf02135b564bd38b75 +size 104073 diff --git a/images/Shaft_02094.png b/images/Shaft_02094.png new file mode 100644 index 0000000000000000000000000000000000000000..53e18d6b62c02761ea46e2150d25b7a979cb4493 --- /dev/null +++ b/images/Shaft_02094.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dede83dd8286fed8dd57a34144c71dc8519465ad7f9064c925da6d62eb708144 +size 90933 diff --git a/images/Shaft_02095.png b/images/Shaft_02095.png new file mode 100644 index 0000000000000000000000000000000000000000..c744bece3dd0c9e3c13702d852cb81dbd8253f3e --- /dev/null +++ b/images/Shaft_02095.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78b96dbcb7e54709f327dcf421b31bb6bc72efc5c0bc1298ae9423740d1018c8 +size 90096 diff --git a/images/Shaft_02096.png b/images/Shaft_02096.png new file mode 100644 index 0000000000000000000000000000000000000000..720693d6c4f73cd1abcfdf4b86dffccec2a13778 --- /dev/null +++ b/images/Shaft_02096.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2dfb3821700d2f506fd8aec9338cff8ebbe58b9ba0d415234b5edd1915f54f71 +size 87173 diff --git a/images/Shaft_02097.png b/images/Shaft_02097.png new file mode 100644 index 0000000000000000000000000000000000000000..988b1165c974b5023276747da774589a128ada92 --- /dev/null +++ b/images/Shaft_02097.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06bfc7f001fd025338a00b40f80b2524702f6339b862fb934796b3643c238581 +size 73175 diff --git a/images/Shaft_02098.png b/images/Shaft_02098.png new file mode 100644 index 0000000000000000000000000000000000000000..a3620d13fc70ed46cc211a8994b1a8152ece1d0f --- /dev/null +++ b/images/Shaft_02098.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fbc4dac567aa4259d8156120b36b0bad0bf6dcf461a18500384fe019017938c9 +size 89574 diff --git a/images/Shaft_02099.png b/images/Shaft_02099.png new file mode 100644 index 0000000000000000000000000000000000000000..72f621f87c178b053f4cf48238579a70dd05403a --- /dev/null +++ b/images/Shaft_02099.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc64ba83c566812cee088b6c8b41bde914afcde91dad4650956f55be901361d6 +size 88301 diff --git a/images/Shaft_02100.png b/images/Shaft_02100.png new file mode 100644 index 0000000000000000000000000000000000000000..00599b24984c04fc56be41bc408e141fdf07245c --- /dev/null +++ b/images/Shaft_02100.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8afe682bc9d7b1fab9b69c276a7c64d09dfab383b70c30d37ea4f138859cdf28 +size 77496 diff --git a/images/Shaft_02101.png b/images/Shaft_02101.png new file mode 100644 index 0000000000000000000000000000000000000000..6dd991601d2c4c412d8dbb5997dcad14dac20fe9 --- /dev/null +++ b/images/Shaft_02101.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ab4f179453e2741f83eda3c011dc934d4cce588747801f4f8bafdd69e863d91 +size 70100 diff --git a/images/Shaft_02102.png b/images/Shaft_02102.png new file mode 100644 index 0000000000000000000000000000000000000000..97e0171834af2c56c64b3e202af6a59a9be85be8 --- /dev/null +++ b/images/Shaft_02102.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0125d7c359f50be0e69c306e6c4bf73c36af18e74eff8e010ffa17b11b9a1266 +size 97253 diff --git a/images/Shaft_02103.png b/images/Shaft_02103.png new file mode 100644 index 0000000000000000000000000000000000000000..7754ba4a21717e8024e4e81488be1cbb433e7021 --- /dev/null +++ b/images/Shaft_02103.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca413e100a0f428f68541c3b298150a46a013b158e7775712b3178680d78c85f +size 97333 diff --git a/images/Shaft_02104.png b/images/Shaft_02104.png new file mode 100644 index 0000000000000000000000000000000000000000..ea9811b6582e2273cb42d836ec7108ea4b1f9a55 --- /dev/null +++ b/images/Shaft_02104.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abb1b8e03a46bce4112ce62518aad2162faa641910ed09969b86c7f3ba52cf85 +size 90517 diff --git a/images/Shaft_02105.png b/images/Shaft_02105.png new file mode 100644 index 0000000000000000000000000000000000000000..ad17342c37a1be836c76b21b122a7e8247646444 --- /dev/null +++ b/images/Shaft_02105.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a6fd68d4511794ae51ab6eedb11d1c0dbf0ad73fdc5b5041ee9f3a5830e8984 +size 70756 diff --git a/images/Shaft_02106.png b/images/Shaft_02106.png new file mode 100644 index 0000000000000000000000000000000000000000..0efac805f988208c07f8d81260910c49467dcd1c --- /dev/null +++ b/images/Shaft_02106.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:073bb22c42d2456c8e6d5eb21733d146f2585b95944e76048a5a06576d2c28e3 +size 81580 diff --git a/images/Shaft_02107.png b/images/Shaft_02107.png new file mode 100644 index 0000000000000000000000000000000000000000..9e4109d66dcf43075d8e2d8f4cf752593f4d8aec --- /dev/null +++ b/images/Shaft_02107.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebfb4bb4c021d356618b7788ae5849d02099bf76bec51398028651726bce2328 +size 75910 diff --git a/images/Shaft_02108.png b/images/Shaft_02108.png new file mode 100644 index 0000000000000000000000000000000000000000..df3a6c384396af2979f4246952ec75de12a00b69 --- /dev/null +++ b/images/Shaft_02108.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7c1db58248660b9c1eb677660542d022bf7763e027dbbf8d73610d48bdc0ddb +size 93637 diff --git a/images/Shaft_02109.png b/images/Shaft_02109.png new file mode 100644 index 0000000000000000000000000000000000000000..38d28fa1ef3a8117e84437cd9d825496ec104782 --- /dev/null +++ b/images/Shaft_02109.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2e9915d75c16c2131f5377851b6ab935e350d98dd4918481eb525820c0cf150 +size 107193 diff --git a/images/Shaft_02110.png b/images/Shaft_02110.png new file mode 100644 index 0000000000000000000000000000000000000000..e7e6cf8eb7367b09a200f79786de3c1604461933 --- /dev/null +++ b/images/Shaft_02110.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3a99724393f74391e02908d16f74f3c4c28d5e5ace001d3c491d983eb52de8e +size 111266 diff --git a/images/Shaft_02111.png b/images/Shaft_02111.png new file mode 100644 index 0000000000000000000000000000000000000000..df2cbf3fd142e64c71e9519054dc4c48cd7944e6 --- /dev/null +++ b/images/Shaft_02111.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4760de67367783bdc570329107fdef23700cd06b0f65dcc55f497b91577c782 +size 71682 diff --git a/images/Shaft_02112.png b/images/Shaft_02112.png new file mode 100644 index 0000000000000000000000000000000000000000..25d0fe5b34ac2d18c50e6359564198e54bc939ff --- /dev/null +++ b/images/Shaft_02112.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60ba4b8f5c058b8199aa39f9b500c9b10ad68cba3f2cfac95bfca87730efca7b +size 74855 diff --git a/images/Shaft_02113.png b/images/Shaft_02113.png new file mode 100644 index 0000000000000000000000000000000000000000..de27e98ccc285d63577f4f85e3dba56df30d2ec3 --- /dev/null +++ b/images/Shaft_02113.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bebbe51710bf371e0ca880eeb0bf78d58546aa7373737762397e386e8cffadb0 +size 87476 diff --git a/images/Shaft_02114.png b/images/Shaft_02114.png new file mode 100644 index 0000000000000000000000000000000000000000..2b8128af0ade1d51af0fc10ae06da158403a72fc --- /dev/null +++ b/images/Shaft_02114.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d569bd6f3b2c61edf416f0e2e6414c910080539d79885acc518e2d17a47ea04 +size 80038 diff --git a/images/Shaft_02115.png b/images/Shaft_02115.png new file mode 100644 index 0000000000000000000000000000000000000000..9bcbf5793b1f2f9eb7313c9ecc38d85c1e8657d2 --- /dev/null +++ b/images/Shaft_02115.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90ffe84bdc831e6b5b3ae85627faa6f1195447ded2ae20cd2cafad1f213debae +size 79907 diff --git a/images/Shaft_02116.png b/images/Shaft_02116.png new file mode 100644 index 0000000000000000000000000000000000000000..30135a234b64ab6304be4dda69649bb990f8bdf3 --- /dev/null +++ b/images/Shaft_02116.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94a9c4c6ea0916c6bf8c6882a20af569cd4378b124699c8d1efafe06a85cff69 +size 103002 diff --git a/images/Shaft_02117.png b/images/Shaft_02117.png new file mode 100644 index 0000000000000000000000000000000000000000..57fde833f304b14d27b718f80a066f3aacc2f61b --- /dev/null +++ b/images/Shaft_02117.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b228274569f1d5801e58117eeeb30bd391ddfb2336a2f7c7f27a4855ff99bf8b +size 70568 diff --git a/images/Shaft_02118.png b/images/Shaft_02118.png new file mode 100644 index 0000000000000000000000000000000000000000..1dff42edd4ce090e0299c166965ec968e1a9c054 --- /dev/null +++ b/images/Shaft_02118.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b0cb7e447e877364e183ab568826875ea7afa6324aaf3c493c368cb418633f2 +size 79395 diff --git a/images/Shaft_02119.png b/images/Shaft_02119.png new file mode 100644 index 0000000000000000000000000000000000000000..1d4ff96f335763836f06ac95e270f6d3f4bf5324 --- /dev/null +++ b/images/Shaft_02119.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d34605cf6eaaf7e16db6d299c1449fdb9f7b538fb26a3e2a5fb4aacbfdcc09c1 +size 114084 diff --git a/images/Shaft_02120.png b/images/Shaft_02120.png new file mode 100644 index 0000000000000000000000000000000000000000..e8de891e510b26ebb1baa04961d09e46e70fd506 --- /dev/null +++ b/images/Shaft_02120.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0e327ac9608c723ac3343c58e5bb1827eb209e7157cdf184f616a35cc208d11 +size 68848 diff --git a/images/Shaft_02121.png b/images/Shaft_02121.png new file mode 100644 index 0000000000000000000000000000000000000000..82ffbe07d86900b48deed583972671177b024a67 --- /dev/null +++ b/images/Shaft_02121.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:981a9c59a0b16c1752999452e83830e62fe797a8ce5f563b8b4fd22c7c0c20ff +size 102363 diff --git a/images/Shaft_02122.png b/images/Shaft_02122.png new file mode 100644 index 0000000000000000000000000000000000000000..f5c9c673db0d99950032ec43980cf00e531da567 --- /dev/null +++ b/images/Shaft_02122.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b59ac51146c5921c9aa6339d973736d325f9ce7a23e0455a9fb2a43e3fb73ed3 +size 85651 diff --git a/images/Shaft_02123.png b/images/Shaft_02123.png new file mode 100644 index 0000000000000000000000000000000000000000..c284d32f2e65cadef22b3f4089382ea57f5d0c29 --- /dev/null +++ b/images/Shaft_02123.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bb03f29290852c198270007546ab0519d712f59bac9c3e8d39f21e7922ba667 +size 87827 diff --git a/images/Shaft_02124.png b/images/Shaft_02124.png new file mode 100644 index 0000000000000000000000000000000000000000..67ce223a33d195187004da2faa0575798e32621d --- /dev/null +++ b/images/Shaft_02124.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c1f8813aa84263f679be5d0dbd9a1f00681fc3e0998467d168cfe0d7fdcdcd1 +size 82966 diff --git a/images/Shaft_02125.png b/images/Shaft_02125.png new file mode 100644 index 0000000000000000000000000000000000000000..585222aef6a149ffb6ceffacde0b632f0286295b --- /dev/null +++ b/images/Shaft_02125.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bf67015b918b7f565f1e9cf02c45e067655238430676c1d2d7e07e4d5518328 +size 94759 diff --git a/images/Shaft_02126.png b/images/Shaft_02126.png new file mode 100644 index 0000000000000000000000000000000000000000..fd19bba30c59b7c2ed8e5ea7f1d0a212385c7e3b --- /dev/null +++ b/images/Shaft_02126.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be125fcc6a72f861c4f3d9d460b22c66fa649db36f59d0b60c4d8c2490675c5a +size 94680 diff --git a/images/Shaft_02127.png b/images/Shaft_02127.png new file mode 100644 index 0000000000000000000000000000000000000000..3cb186ee7be029462e166651576152f1249eb0f1 --- /dev/null +++ b/images/Shaft_02127.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:acf16bb47ef40d07eb89ba35e8ac7d12e6e9c50d0ab78f65bd349529f801721b +size 78025 diff --git a/images/Shaft_02128.png b/images/Shaft_02128.png new file mode 100644 index 0000000000000000000000000000000000000000..7847e9ee4f4f05856962d572763cd237f27405db --- /dev/null +++ b/images/Shaft_02128.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35d68a43dcf3fa2fd78b80de1940d6733a8e29ac909d808a4eceaafcc3b5a3c3 +size 112508 diff --git a/images/Shaft_02129.png b/images/Shaft_02129.png new file mode 100644 index 0000000000000000000000000000000000000000..625f1d9f92e8322ede70dac294a8ce55ad29a1a3 --- /dev/null +++ b/images/Shaft_02129.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bef3fa5aca004678c402ae404bc7c565b42139b2b35b6a10e52438e02431fc8 +size 91945 diff --git a/images/Shaft_02130.png b/images/Shaft_02130.png new file mode 100644 index 0000000000000000000000000000000000000000..c8c13d5f1939f46572118f32a7e9f7475bf5adfc --- /dev/null +++ b/images/Shaft_02130.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65383dfb88f9f4815d4ec4357bc8ad68495a6cb6d6cd04fe1d077c671c96a9b8 +size 79622 diff --git a/images/Shaft_02131.png b/images/Shaft_02131.png new file mode 100644 index 0000000000000000000000000000000000000000..f0b2e13889f7703d03790408ba9aeee7d35c946f --- /dev/null +++ b/images/Shaft_02131.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:caed2842acc8a7138b1a212b2d25788717f413bb60ddb2b5248d7272db9a088f +size 76709 diff --git a/images/Shaft_02132.png b/images/Shaft_02132.png new file mode 100644 index 0000000000000000000000000000000000000000..a4d3ee74bf1d09a6524e818092455fff07705ddd --- /dev/null +++ b/images/Shaft_02132.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34509c970de4be550507cbf2d6e9c010698e0ba4b8c9a3e14e342faf40bfeba6 +size 70582 diff --git a/images/Shaft_02133.png b/images/Shaft_02133.png new file mode 100644 index 0000000000000000000000000000000000000000..f5d26d0416c4b92728a828d9d2452fec50b9cd40 --- /dev/null +++ b/images/Shaft_02133.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ad0dd56daf5fb1ddf52919e866085a1d0037c75886725834fed143b64958a28 +size 95192 diff --git a/images/Shaft_02134.png b/images/Shaft_02134.png new file mode 100644 index 0000000000000000000000000000000000000000..8af0f307472f46e0a43915bad67590731ebedadf --- /dev/null +++ b/images/Shaft_02134.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79691f6c0ae4b89c01b3350234f5b3e4ad8b9b3afe3007b21af98fbb9db15c83 +size 72420 diff --git a/images/Shaft_02135.png b/images/Shaft_02135.png new file mode 100644 index 0000000000000000000000000000000000000000..e5360b2aa00ddd486459b918b60ad942d61bca22 --- /dev/null +++ b/images/Shaft_02135.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:052a0722ca73c8e4788c8f5d4bba2dc5001b36f261b4a6d2168a45d044850c92 +size 97079 diff --git a/images/Shaft_02136.png b/images/Shaft_02136.png new file mode 100644 index 0000000000000000000000000000000000000000..9d2c789292ced3586b72c3e992fc8193925fbb27 --- /dev/null +++ b/images/Shaft_02136.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9731ef3bf15070017e2268941f43463a9804ed55fc9eaa7bb6f18d19416812f6 +size 75063 diff --git a/images/Shaft_02137.png b/images/Shaft_02137.png new file mode 100644 index 0000000000000000000000000000000000000000..64200332575810a79c08c6ef17f78356e1a574ef --- /dev/null +++ b/images/Shaft_02137.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa29e5e4ebd49b5a6c8d0ac77d2fc930f33b3c391a00ec92787bd87fc6e090d2 +size 93318 diff --git a/images/Shaft_02138.png b/images/Shaft_02138.png new file mode 100644 index 0000000000000000000000000000000000000000..4f2a9c2421e11e7feae7474c805682d0e4624c54 --- /dev/null +++ b/images/Shaft_02138.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f2a269a7fe3e97fc9b7b57a794ef2d5401072470e76c341846d54d561ec17c2 +size 79069 diff --git a/images/Shaft_02139.png b/images/Shaft_02139.png new file mode 100644 index 0000000000000000000000000000000000000000..995a567971db25f0d889402b5618cb6cb3f629c6 --- /dev/null +++ b/images/Shaft_02139.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c18ea37d284c9c74a7f10f783f5b3d4a5fa23b64866bed0b81143854f75e366 +size 122781 diff --git a/images/Shaft_02140.png b/images/Shaft_02140.png new file mode 100644 index 0000000000000000000000000000000000000000..b09cc32ab12ed5ed6a21a5569b745f5548649b76 --- /dev/null +++ b/images/Shaft_02140.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d6b8518e1d4c43553f93d8825272e4d92fe5e2dcc1f9669520fbcc122e30a2b +size 88467 diff --git a/images/Shaft_02141.png b/images/Shaft_02141.png new file mode 100644 index 0000000000000000000000000000000000000000..64ebe95d0d57d362ca1939e103fd600029a6f56d --- /dev/null +++ b/images/Shaft_02141.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b24fef8c5af71c766d22093e8a8abc3df6730033ba9c34fca45b4b7956dca83 +size 98346 diff --git a/images/Shaft_02142.png b/images/Shaft_02142.png new file mode 100644 index 0000000000000000000000000000000000000000..6e735f6224c05dc5853f8be9b9b600805a812616 --- /dev/null +++ b/images/Shaft_02142.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa599672548d5ff57ce5e2ebbec54c8c8f7e95d8b5be2203e2768c35b2e17847 +size 76258 diff --git a/images/Shaft_02143.png b/images/Shaft_02143.png new file mode 100644 index 0000000000000000000000000000000000000000..35ee6f1350830cebec895527b951d8b1a856f242 --- /dev/null +++ b/images/Shaft_02143.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a35d98655a56c061ae69c957f6fafc66c1ffbc327fa5e65662375527523de8fa +size 94145 diff --git a/images/Shaft_02144.png b/images/Shaft_02144.png new file mode 100644 index 0000000000000000000000000000000000000000..f33846d93d0bef4bcd03aba042e2e16a1e6b017e --- /dev/null +++ b/images/Shaft_02144.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca91f46c2fac55974f76dfbd25a7f9a24f0bb3f0630fce450b7123ee52d754b1 +size 82198 diff --git a/images/Shaft_02145.png b/images/Shaft_02145.png new file mode 100644 index 0000000000000000000000000000000000000000..c2b2955537e54ca29027a75525607be7145467f5 --- /dev/null +++ b/images/Shaft_02145.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2179d0b7901fc81dca983ebb3a31fce15a3e143eed07ceb17009cc9a74dd82d1 +size 89722 diff --git a/images/Shaft_02146.png b/images/Shaft_02146.png new file mode 100644 index 0000000000000000000000000000000000000000..f9713493904c291435e5de5ba6890e83e1c1e8cb --- /dev/null +++ b/images/Shaft_02146.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf77c5e9aa1667df8dca8dcab31431050be457f1b323a3b210de34b9532907a3 +size 77259 diff --git a/images/Shaft_02147.png b/images/Shaft_02147.png new file mode 100644 index 0000000000000000000000000000000000000000..265e0d0c754fd5e66a8b2abbaecce8e855a28567 --- /dev/null +++ b/images/Shaft_02147.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a2352b3b0c59237bda3550c4eac1b1eca25b8be68910a344eed4dbd13e820bc +size 104136 diff --git a/images/Shaft_02148.png b/images/Shaft_02148.png new file mode 100644 index 0000000000000000000000000000000000000000..3157f66d790ffa46ef625b27829e64a5cbe0c1e6 --- /dev/null +++ b/images/Shaft_02148.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0c4bfa3844b2cec63495057eb2cc70728ca2e121f373fec7ffcd877913bbe24 +size 87953 diff --git a/images/Shaft_02149.png b/images/Shaft_02149.png new file mode 100644 index 0000000000000000000000000000000000000000..96b7edfd0dac453b3047a73966f1f5a3b3b6b0f6 --- /dev/null +++ b/images/Shaft_02149.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6d479cf3421bf9e50275af7ed994b38068510510f9bc903148f91e0cd0870e3 +size 111842 diff --git a/images/Shaft_02150.png b/images/Shaft_02150.png new file mode 100644 index 0000000000000000000000000000000000000000..74248c87ac4620c9029c9bfbb86dbe09ee94523c --- /dev/null +++ b/images/Shaft_02150.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e0916eacc4a93fd48234bb3a4024cfa67a691f88fe7b095b4a43397e4d6a3c8 +size 76642 diff --git a/images/Shaft_02151.png b/images/Shaft_02151.png new file mode 100644 index 0000000000000000000000000000000000000000..96d79fba1f3b2ad411d0fb037035f7c7361e9495 --- /dev/null +++ b/images/Shaft_02151.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7040f67091a3398126b9bcba1e9c7bee0aa4f569ea3a799c14dcc582476a429 +size 106545 diff --git a/images/Shaft_02152.png b/images/Shaft_02152.png new file mode 100644 index 0000000000000000000000000000000000000000..f37d51500f89b8319575eff71f2dcd4f3b026e23 --- /dev/null +++ b/images/Shaft_02152.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1d8b8cb1eed9b2d7476222aa20639cdc7981bc10d4b76f6a2847b9e31861091 +size 104139 diff --git a/images/Shaft_02153.png b/images/Shaft_02153.png new file mode 100644 index 0000000000000000000000000000000000000000..c25b93c77269ebf3cd19999493cebc320b79a330 --- /dev/null +++ b/images/Shaft_02153.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca1c5fea72c330d67b1b4acacfa2cb82d3f9bf0d0ec872ac29a2e2c6fb58ebee +size 93550 diff --git a/images/Shaft_02154.png b/images/Shaft_02154.png new file mode 100644 index 0000000000000000000000000000000000000000..ff26f4196c47f433a6b894a4ceca4bed4fdb7066 --- /dev/null +++ b/images/Shaft_02154.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e07aa379c06ed20055b70e0875180a58c99f7ac1f98336851de9b5c08d68672a +size 79845 diff --git a/images/Shaft_02155.png b/images/Shaft_02155.png new file mode 100644 index 0000000000000000000000000000000000000000..54ac3571b2e7edec792192089cddcadd123978a4 --- /dev/null +++ b/images/Shaft_02155.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fae7e7ce3994ae9a29880104eb5ab31a72918d3180f7deaf0ad0b916f6e27b13 +size 87134 diff --git a/images/Shaft_02156.png b/images/Shaft_02156.png new file mode 100644 index 0000000000000000000000000000000000000000..9b15856553cfc03f2dab2c2d7f48a7e0a169df7b --- /dev/null +++ b/images/Shaft_02156.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:074c4061ee455387b714873d662ea03fb0bdaffd2df26598aef2d49592ca2e32 +size 96947 diff --git a/images/Shaft_02157.png b/images/Shaft_02157.png new file mode 100644 index 0000000000000000000000000000000000000000..b362ca31fef6da145230ac4f4ff56e4a1d8016bf --- /dev/null +++ b/images/Shaft_02157.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6783649b9da60aae6f59f5e4b909bc5d7cb13330385b12152cb6fbd7049af905 +size 88949 diff --git a/images/Shaft_02158.png b/images/Shaft_02158.png new file mode 100644 index 0000000000000000000000000000000000000000..9855d158a26d5e95138c3b5f342510714cf9258e --- /dev/null +++ b/images/Shaft_02158.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:902d3aa64147e4820b13bfcaeeb1fb437ee1d5b8f5fcdc32aabede33a2aade86 +size 103875 diff --git a/images/Shaft_02159.png b/images/Shaft_02159.png new file mode 100644 index 0000000000000000000000000000000000000000..3f92cc68167645881d58d26085ab6219d93c1a9c --- /dev/null +++ b/images/Shaft_02159.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb0a2cf9692f2e11e7fd594101173bcf24eeb371f59f66d20d32e55908a5863b +size 91812 diff --git a/images/Shaft_02160.png b/images/Shaft_02160.png new file mode 100644 index 0000000000000000000000000000000000000000..1d4a9b9e2a4f06c1bb5e4085aa75902a257c58c2 --- /dev/null +++ b/images/Shaft_02160.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d441b439ba221e0316dcf058d9ad976ec3a14ca798eb0075b902138288d560b +size 92783 diff --git a/images/Shaft_02161.png b/images/Shaft_02161.png new file mode 100644 index 0000000000000000000000000000000000000000..068ead5fe4431e4f7e16036ce977fe0363086a56 --- /dev/null +++ b/images/Shaft_02161.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dde91d012ebceec50f768ea8e17b10b7224e78cb620a4fa254d48828ccdbdce3 +size 91129 diff --git a/images/Shaft_02162.png b/images/Shaft_02162.png new file mode 100644 index 0000000000000000000000000000000000000000..c093634946687cae3cad22679b4a9f8088a0a2dd --- /dev/null +++ b/images/Shaft_02162.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cd1191470c2690870f698a41769b2a76fa203ed1528895eca1be0bafe6a6300 +size 71233 diff --git a/images/Shaft_02163.png b/images/Shaft_02163.png new file mode 100644 index 0000000000000000000000000000000000000000..aff8c1e4b9c8840427d72ab3fedf1ebb1b9da68e --- /dev/null +++ b/images/Shaft_02163.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a10dcbad60e526ba334717aa913b0b4dfc6a5c124e7dd146397e24ba40b7b14 +size 72078 diff --git a/images/Shaft_02164.png b/images/Shaft_02164.png new file mode 100644 index 0000000000000000000000000000000000000000..35a00a085ffebd567d9965a1b5ef1582ee75f2ba --- /dev/null +++ b/images/Shaft_02164.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38684b6ebd875193e9bd79e6c72a9c8fabb8eefc7c54b3680c5a07f04b4a4f07 +size 83255 diff --git a/images/Shaft_02165.png b/images/Shaft_02165.png new file mode 100644 index 0000000000000000000000000000000000000000..5c67087cc042d78ef83c8a3768329305c4ed85b5 --- /dev/null +++ b/images/Shaft_02165.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:299f20f53752d50356b6af4aee3376e759b1579b8e4bd5f521e44183ccd559f1 +size 85365 diff --git a/images/Shaft_02166.png b/images/Shaft_02166.png new file mode 100644 index 0000000000000000000000000000000000000000..8f825f81343c7ebcd11482a8d832038a19df39a1 --- /dev/null +++ b/images/Shaft_02166.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0306e096b241407fcf0a03099a12d620ee436c441c86a420929032aeb5148121 +size 74502 diff --git a/images/Shaft_02167.png b/images/Shaft_02167.png new file mode 100644 index 0000000000000000000000000000000000000000..e18a33e0713a684a1b1615bdb41ea4eef711f09d --- /dev/null +++ b/images/Shaft_02167.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:178278b41126afa31a1bb2635e69212c5f74cca2e81d5f91104e69ef04225e16 +size 95847 diff --git a/images/Shaft_02168.png b/images/Shaft_02168.png new file mode 100644 index 0000000000000000000000000000000000000000..5fd71bdc7fda55f3cf5bc8319e2dc9ec4b3a4f26 --- /dev/null +++ b/images/Shaft_02168.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e34525d58fd01a83a9d9e1f3a2e27aa441d308c5fcab09aee56d2b53c8e18571 +size 68295 diff --git a/images/Shaft_02169.png b/images/Shaft_02169.png new file mode 100644 index 0000000000000000000000000000000000000000..906b02b5df3293d2129a0c3e0e724726e68d4f13 --- /dev/null +++ b/images/Shaft_02169.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b8d7262392560ac93948e2e7f0b18053bfdbba4046e02f07cbf6bae6e2f1cb3 +size 98812 diff --git a/images/Shaft_02170.png b/images/Shaft_02170.png new file mode 100644 index 0000000000000000000000000000000000000000..ec116177494b26e79a9fd3ef63aa92ba82802f30 --- /dev/null +++ b/images/Shaft_02170.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97f84f82dfa18eb77c00d9fa265ff54e8fa45fb5ae44d25ce7ca568e41c1d1f5 +size 114714 diff --git a/images/Shaft_02171.png b/images/Shaft_02171.png new file mode 100644 index 0000000000000000000000000000000000000000..cf17f87a4848da72f5a9f68fc3c2027f0e622a40 --- /dev/null +++ b/images/Shaft_02171.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5dbe51cb2318363c9c71b99ae1a1a4b62a3f1043b7698ab9af8551d7c4af94aa +size 79800 diff --git a/images/Shaft_02172.png b/images/Shaft_02172.png new file mode 100644 index 0000000000000000000000000000000000000000..0be59ded839e2b795a417d7d42da22cb74cc2e28 --- /dev/null +++ b/images/Shaft_02172.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2a02015c7d1e349887b6dd7f1b6f328648bc509d174a55f136cf1762e068dca +size 92563 diff --git a/images/Shaft_02173.png b/images/Shaft_02173.png new file mode 100644 index 0000000000000000000000000000000000000000..c7d56ec62370380d267b7bfc64c44271c48a40a5 --- /dev/null +++ b/images/Shaft_02173.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b833f9273f5c12633320ea31d74d6b6430f2dd8097772604fb559d9c478c6a0c +size 79317 diff --git a/images/Shaft_02174.png b/images/Shaft_02174.png new file mode 100644 index 0000000000000000000000000000000000000000..22e84e9f33e86e1dc1e6372684a52119db6e6111 --- /dev/null +++ b/images/Shaft_02174.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:876c78fb4ded4639fab6af98f0b22f7f20af012679bab28d6f1f198e799dd5dd +size 83843 diff --git a/images/Shaft_02175.png b/images/Shaft_02175.png new file mode 100644 index 0000000000000000000000000000000000000000..8b85026cb53966569500a9572809475afb375064 --- /dev/null +++ b/images/Shaft_02175.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15e4b86d391dae1af6c46ec028ba46604153f75ceb07da7f83e04c7d27615d98 +size 72438 diff --git a/images/Shaft_02176.png b/images/Shaft_02176.png new file mode 100644 index 0000000000000000000000000000000000000000..6bdd3fe736729787e8bd973c7e17f19b50b76048 --- /dev/null +++ b/images/Shaft_02176.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5ed5a2b3c831e3b3b0a537e236b135cd7fdef0f3f0d1d0b6f0e964ab6f72483 +size 77808 diff --git a/images/Shaft_02177.png b/images/Shaft_02177.png new file mode 100644 index 0000000000000000000000000000000000000000..dcc5065d9b8023fc12b7a5a2f4d61dd407350071 --- /dev/null +++ b/images/Shaft_02177.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a37767bf299851276cdcf686bfa85d85876c3f28fa0bd45ea68a4d69fa7308d5 +size 102961 diff --git a/images/Shaft_02178.png b/images/Shaft_02178.png new file mode 100644 index 0000000000000000000000000000000000000000..caceb87fca124feb5dd10420ec4272a6b9b21bd7 --- /dev/null +++ b/images/Shaft_02178.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a56077b77006c39fc96f142069dfdb326c17a5ed81fee2b8bc965f7427c5231b +size 96037 diff --git a/images/Shaft_02179.png b/images/Shaft_02179.png new file mode 100644 index 0000000000000000000000000000000000000000..714aaa8bc9c747484b3935ac824c345db62e3e5e --- /dev/null +++ b/images/Shaft_02179.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:022fd3d9d1261cd671e7fa665d909ad0e3cdaedd3c72084c94dbc195d4150dc5 +size 111902 diff --git a/images/Shaft_02180.png b/images/Shaft_02180.png new file mode 100644 index 0000000000000000000000000000000000000000..1cc30e39b1c62241f44fbacf9dbd545e5bdf3563 --- /dev/null +++ b/images/Shaft_02180.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d37971c418ffbb9d5cc29d8ff1b3cc752b6032fd7f0a996d6734d46cbfccd86 +size 71740 diff --git a/images/Shaft_02181.png b/images/Shaft_02181.png new file mode 100644 index 0000000000000000000000000000000000000000..045577c30d06a9b55ea69712454ad388cff65276 --- /dev/null +++ b/images/Shaft_02181.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbacb048fc24c50b3303a5db202ec4d3b01e6c5691959271f0ea64a76a78180f +size 70913 diff --git a/images/Shaft_02182.png b/images/Shaft_02182.png new file mode 100644 index 0000000000000000000000000000000000000000..f803a333983704801cc61a3e5c2391b972d33286 --- /dev/null +++ b/images/Shaft_02182.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f47b2c4435d4a44faba8696d888d903e41b9fdb2ede3ac7a8ecd95561913558d +size 72815 diff --git a/images/Shaft_02183.png b/images/Shaft_02183.png new file mode 100644 index 0000000000000000000000000000000000000000..c337ee31284e3b1c24a830b0d0b8bc5080ff17a2 --- /dev/null +++ b/images/Shaft_02183.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f1b3ef2019d5b0d68d6170fa82b1860714e7d9272c7ae1b8110ca6ab7acab50 +size 68646 diff --git a/images/Shaft_02184.png b/images/Shaft_02184.png new file mode 100644 index 0000000000000000000000000000000000000000..89cda634eef5083d9fa97cd8aa45432d564535a1 --- /dev/null +++ b/images/Shaft_02184.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56f9a5c51e7d885112fd5efe8d2cdc716d6ef2aefef792074136f0898c762614 +size 73907 diff --git a/images/Shaft_02185.png b/images/Shaft_02185.png new file mode 100644 index 0000000000000000000000000000000000000000..5ff3d9202ad77c31fd2eb42ccc928bf8692b4524 --- /dev/null +++ b/images/Shaft_02185.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc453b84e3d32f41e08c1d249ad699a955533e320a4502896c413db4828674f9 +size 71378 diff --git a/images/Shaft_02186.png b/images/Shaft_02186.png new file mode 100644 index 0000000000000000000000000000000000000000..fbb5525048d6e7142723c0833e845a9789327019 --- /dev/null +++ b/images/Shaft_02186.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79e33c82903429cbd3b83276cba2a7c989d46de50a16e1c3a93350fe05c3199f +size 80392 diff --git a/images/Shaft_02187.png b/images/Shaft_02187.png new file mode 100644 index 0000000000000000000000000000000000000000..557a87657f83de1a36c2f5516b2f40778995776e --- /dev/null +++ b/images/Shaft_02187.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c2102cf80cdda82935be5600189bba899c2fb41b2971b88d7fcc42b7cdb7c7a +size 85181 diff --git a/images/Shaft_02188.png b/images/Shaft_02188.png new file mode 100644 index 0000000000000000000000000000000000000000..d47d435906c1009bc3dd2c48bc18fae38ae60759 --- /dev/null +++ b/images/Shaft_02188.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee68de3941921b835889417c2556df1d3928cd1ce5bd205a72e5c37a452bd21b +size 89395 diff --git a/images/Shaft_02189.png b/images/Shaft_02189.png new file mode 100644 index 0000000000000000000000000000000000000000..135517293c38ebdfb87e897f93812611b25b744d --- /dev/null +++ b/images/Shaft_02189.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8b33c3c45b2f92db37e3226cc7f9e42af46fc96265ef0e45e5de7ce4e5769bb +size 85828 diff --git a/images/Shaft_02190.png b/images/Shaft_02190.png new file mode 100644 index 0000000000000000000000000000000000000000..483174332c22605390dea82ebe2141c2f4121f07 --- /dev/null +++ b/images/Shaft_02190.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41e4037bcc5756ada5a3ab0766b8f6a14b3742caf83c2a64921efca2ebb9678a +size 99612 diff --git a/images/Shaft_02191.png b/images/Shaft_02191.png new file mode 100644 index 0000000000000000000000000000000000000000..ad86bdfa327a71aef60a96448a5c228751d0640f --- /dev/null +++ b/images/Shaft_02191.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f73e6e014f7496e5d5ca432154507ae7c776ffdc2c51296d76903b3d1a67b0e +size 71050 diff --git a/images/Shaft_02192.png b/images/Shaft_02192.png new file mode 100644 index 0000000000000000000000000000000000000000..2193a04ec260a9ca16cbcf15d3e947c8911af8c3 --- /dev/null +++ b/images/Shaft_02192.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e6ea33c59ed33332a073d85de48fc3b5e61b2f6e5f34ba12c8c66d3c07d2b56 +size 80836 diff --git a/images/Shaft_02193.png b/images/Shaft_02193.png new file mode 100644 index 0000000000000000000000000000000000000000..39180e8333ef78a71e9970e63392b807b60ac14b --- /dev/null +++ b/images/Shaft_02193.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8e00fbe336aa51b4a8790d55cc08f3e04ce08f3f410032b6f96a46607b5ba44 +size 85914 diff --git a/images/Shaft_02194.png b/images/Shaft_02194.png new file mode 100644 index 0000000000000000000000000000000000000000..be3c175b96c96d9b4670cd9c60f2177d6f5ccccb --- /dev/null +++ b/images/Shaft_02194.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:163d6b6fc3766d8d483379457387410506967694bbbb87572b928ca9434b3fcb +size 94488 diff --git a/images/Shaft_02195.png b/images/Shaft_02195.png new file mode 100644 index 0000000000000000000000000000000000000000..cea8f9b0808e880aaddc779ad44d46497550a321 --- /dev/null +++ b/images/Shaft_02195.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09e1e6cb6784145620d7b52ba076b16e87d8674b874d4b0729ba801b67876f9d +size 70021 diff --git a/images/Shaft_02196.png b/images/Shaft_02196.png new file mode 100644 index 0000000000000000000000000000000000000000..e022e42c20977e55184aa391907a5eb375d21da4 --- /dev/null +++ b/images/Shaft_02196.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0983d302d6a6fb2eea1ca77782a50854f11e56cd10792a4f3c4d0d03a1548bf +size 71497 diff --git a/images/Shaft_02197.png b/images/Shaft_02197.png new file mode 100644 index 0000000000000000000000000000000000000000..89214bcf6c804fde0c2a65c5bd83f91e37879538 --- /dev/null +++ b/images/Shaft_02197.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af2bff4a5fe8bc05b5d25e5f7ff579e406f68d38f5e28aa4281ac2519f6550c9 +size 78860 diff --git a/images/Shaft_02198.png b/images/Shaft_02198.png new file mode 100644 index 0000000000000000000000000000000000000000..08417d021dd81a56b4ac450dfed5c17a29a3c6a5 --- /dev/null +++ b/images/Shaft_02198.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3d4f78ffd455844bea77ad574c3f462f3a1f516b52a0377795bbc8484823bbd +size 85619 diff --git a/images/Shaft_02199.png b/images/Shaft_02199.png new file mode 100644 index 0000000000000000000000000000000000000000..46afcf91573cc9cad4262c6c43dbf2b92e585c4f --- /dev/null +++ b/images/Shaft_02199.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48081fa3340d88fccdb4fa8e82963b3dbe94e7210423c4d0952d1a95c6105d7 +size 95071 diff --git a/images/Shaft_02200.png b/images/Shaft_02200.png new file mode 100644 index 0000000000000000000000000000000000000000..8e0a1d2856d0d684c03b7b4f85216a6bf8fe5b15 --- /dev/null +++ b/images/Shaft_02200.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03e58ac4f798e33dfec8a2a7374781afac4ae1af5ad384dfa1a539f27c62d072 +size 104055 diff --git a/images/Shaft_02201.png b/images/Shaft_02201.png new file mode 100644 index 0000000000000000000000000000000000000000..dd14196887dd53c19bead80d57d72d04e9eb9453 --- /dev/null +++ b/images/Shaft_02201.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a13fb4b9554b4d5afe143611fe520fe667341256b5acbc0e8b3c00fb683bea4 +size 98543 diff --git a/images/Shaft_02202.png b/images/Shaft_02202.png new file mode 100644 index 0000000000000000000000000000000000000000..2e1624ba4fb77edd86280795aabea3c1a829869e --- /dev/null +++ b/images/Shaft_02202.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f50fb7f23b26333c59405d43f7dace7ea24062ce1ac42d19827904a42604b2f4 +size 73132 diff --git a/images/Shaft_02203.png b/images/Shaft_02203.png new file mode 100644 index 0000000000000000000000000000000000000000..53e98e197142e66feb6e4eced283ed0e33b54e4c --- /dev/null +++ b/images/Shaft_02203.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcf9f3bb9ec5109eb1f44515c21406e75cc99e58c534750645c41210b5d8adcc +size 76219 diff --git a/images/Shaft_02204.png b/images/Shaft_02204.png new file mode 100644 index 0000000000000000000000000000000000000000..30012eb4a5a9b9633b8dea58a7a1e5758c91a744 --- /dev/null +++ b/images/Shaft_02204.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65e6511b65e859b3c65d393ff6ee8a9c9d7e2e0bcd46d05b42d59fb8e3a78878 +size 97893 diff --git a/images/Shaft_02205.png b/images/Shaft_02205.png new file mode 100644 index 0000000000000000000000000000000000000000..aa50019fe07b86a866115bd2a9b5012e0e47f6d9 --- /dev/null +++ b/images/Shaft_02205.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3592d045b053026e6a0bad605feee05d368fd7d43946d7e01f428e75e879a087 +size 82507 diff --git a/images/Shaft_02206.png b/images/Shaft_02206.png new file mode 100644 index 0000000000000000000000000000000000000000..7f32fa79eeaf880015d504d1e4379cc7d1bcc9a1 --- /dev/null +++ b/images/Shaft_02206.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5eec5e1796c61ff108f5a1cdec32f7f3036cc3b77e216fb7b460ab00c4cc8ba1 +size 72523 diff --git a/images/Shaft_02207.png b/images/Shaft_02207.png new file mode 100644 index 0000000000000000000000000000000000000000..889fe5e2ef01ce553c4086e57dfb195550de3899 --- /dev/null +++ b/images/Shaft_02207.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ede7a40e47d478b0ef69198c3740bbe5def89aef2d20a6e565de50d043b0acd8 +size 71821 diff --git a/images/Shaft_02208.png b/images/Shaft_02208.png new file mode 100644 index 0000000000000000000000000000000000000000..de3185f712c86b4cafb082cecf40d9112c282f5c --- /dev/null +++ b/images/Shaft_02208.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfc9904b5f664eb726993515fea705263fb8b50066d34acec16990ddce988fb2 +size 103891 diff --git a/images/Shaft_02209.png b/images/Shaft_02209.png new file mode 100644 index 0000000000000000000000000000000000000000..0ed9b25f311510df17fee942a610e13a72835050 --- /dev/null +++ b/images/Shaft_02209.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6706376f98e31f3901890e9ce205d3100a3de9bd7d30faf6eaeb33906b234e21 +size 74323 diff --git a/images/Shaft_02210.png b/images/Shaft_02210.png new file mode 100644 index 0000000000000000000000000000000000000000..bd996f2499f619a89075295c629324f551b49590 --- /dev/null +++ b/images/Shaft_02210.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a681d844d2023e70c3d0e73aaa81b9c6ad69ff3a2cd485f4ba910c4f0b99bb8b +size 70461 diff --git a/images/Shaft_02211.png b/images/Shaft_02211.png new file mode 100644 index 0000000000000000000000000000000000000000..3315297a3d6ceba3af4092bba460c2746a4b7e2a --- /dev/null +++ b/images/Shaft_02211.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ac92615d47e7f6c9fb823c947c0641e7e2be419b52277e645a57e9b495fff19 +size 90400 diff --git a/images/Shaft_02212.png b/images/Shaft_02212.png new file mode 100644 index 0000000000000000000000000000000000000000..cdeb91ae81f2b130fa8cce87832f8175d3db6ce4 --- /dev/null +++ b/images/Shaft_02212.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32f63307260fd6444e78aff1bf6a162c31e744e63a87a43d0e36bdfcf7786969 +size 92237 diff --git a/images/Shaft_02213.png b/images/Shaft_02213.png new file mode 100644 index 0000000000000000000000000000000000000000..13dc87760d54b8b9f009cf8e8757988540c8f59c --- /dev/null +++ b/images/Shaft_02213.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac2f5e20ab45856a1e8ae3aa0e739a5bc5f96da1f98c25f43f020e868003e9fb +size 72317 diff --git a/images/Shaft_02214.png b/images/Shaft_02214.png new file mode 100644 index 0000000000000000000000000000000000000000..137aae11a7a725552d5bdb0040fa22e79a2e2633 --- /dev/null +++ b/images/Shaft_02214.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98935fa370e00184ff756fcdbb981d52cd3697ce5df329fa37c4fe7db1de8a81 +size 102893 diff --git a/images/Shaft_02215.png b/images/Shaft_02215.png new file mode 100644 index 0000000000000000000000000000000000000000..7f09ed223972fee58df0315a559a8bd90b33c290 --- /dev/null +++ b/images/Shaft_02215.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7015d484334be64f93131fb9cd892ee4f2eca4d3b939ca16a0228fff59a28d6a +size 83345 diff --git a/images/Shaft_02216.png b/images/Shaft_02216.png new file mode 100644 index 0000000000000000000000000000000000000000..54b020c86bb33d2e39d17d18decce0f2c1f2171c --- /dev/null +++ b/images/Shaft_02216.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50c79739c04bc36ef7e602ffb11eed47acdf271fa40e08a3bfb91cd267377b5b +size 90802 diff --git a/images/Shaft_02217.png b/images/Shaft_02217.png new file mode 100644 index 0000000000000000000000000000000000000000..09447293daafc879520d3c3b7af8bd4848de24da --- /dev/null +++ b/images/Shaft_02217.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c51a863c9a288cd96abee08dc24303d962349cca733a8bf7913f3acc5d6c42d2 +size 74538 diff --git a/images/Shaft_02218.png b/images/Shaft_02218.png new file mode 100644 index 0000000000000000000000000000000000000000..1c85e05f987b0541c1e155b4946615c67f202cf2 --- /dev/null +++ b/images/Shaft_02218.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6705ea6bf0770e3752bd8f3574e07ed962a05953d34abfaf2f74fb4b12c8ab5 +size 70666 diff --git a/images/Shaft_02219.png b/images/Shaft_02219.png new file mode 100644 index 0000000000000000000000000000000000000000..24454218a1c0dc139f522f58d84062ae73131f8e --- /dev/null +++ b/images/Shaft_02219.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c51ef0b2541755e1b6cd1deed855515af750f3eb3cd3c42429cd909211e5884 +size 82796 diff --git a/images/Shaft_02220.png b/images/Shaft_02220.png new file mode 100644 index 0000000000000000000000000000000000000000..14acc1bc7c5c6555e1575d9acdea533a17feeffb --- /dev/null +++ b/images/Shaft_02220.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6dc6f1e48ff43953697e63e9ad1f5417686bc45512bcaeff8a178d3ddd203bb +size 68139 diff --git a/images/Shaft_02221.png b/images/Shaft_02221.png new file mode 100644 index 0000000000000000000000000000000000000000..dc3b3d42e5c9e29c724ce2d2409354ef4a21a14b --- /dev/null +++ b/images/Shaft_02221.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03fd3c9049900384310dd83c0d6c688d5e21318f0f85b1ff7cd6418a90338bf4 +size 83372 diff --git a/images/Shaft_02222.png b/images/Shaft_02222.png new file mode 100644 index 0000000000000000000000000000000000000000..add9cd6e931ea5763e5240cabd8c53cc1fcc8b9d --- /dev/null +++ b/images/Shaft_02222.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30c778f5a3539c13ef891d524021b6bb5a06194c441cecfe58909f862375855b +size 72091 diff --git a/images/Shaft_02223.png b/images/Shaft_02223.png new file mode 100644 index 0000000000000000000000000000000000000000..af95637fe137c5cdb7fb21c2b73ee10a873efdc2 --- /dev/null +++ b/images/Shaft_02223.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e188b448de3c6988fcdbc4454e40cd18335da493596dd9cbdbbbe36ea9d0899 +size 72401 diff --git a/images/Shaft_02224.png b/images/Shaft_02224.png new file mode 100644 index 0000000000000000000000000000000000000000..61935385f8e474c86365fd95c6d3a6c3d6224904 --- /dev/null +++ b/images/Shaft_02224.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d1485ad3bf09aa25fec7028d380cd580b6f148625b5765049313e3560770bec +size 81262 diff --git a/images/Shaft_02225.png b/images/Shaft_02225.png new file mode 100644 index 0000000000000000000000000000000000000000..4ec270b12e9147cd0d6c6b8d9f52bc1b713f8ade --- /dev/null +++ b/images/Shaft_02225.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7100cd5f05a9060735a6b975cf530c4dec48c739f673c6a77ba076482a68a6c1 +size 85205 diff --git a/images/Shaft_02226.png b/images/Shaft_02226.png new file mode 100644 index 0000000000000000000000000000000000000000..c1878f9aff5e040240f7efbdf144a1c43c996aec --- /dev/null +++ b/images/Shaft_02226.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abb43680d3a185666af01a30c8e4ba765c61810d9de122b541065064a0ec4607 +size 106942 diff --git a/images/Shaft_02227.png b/images/Shaft_02227.png new file mode 100644 index 0000000000000000000000000000000000000000..32151a5a34a9b0cdfefc127f85eb042c73c69fe7 --- /dev/null +++ b/images/Shaft_02227.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e246e99f2206b6151d45528f1441c22e5a5dfa83fcf5f05f5dfd99bed1395eae +size 78033 diff --git a/images/Shaft_02228.png b/images/Shaft_02228.png new file mode 100644 index 0000000000000000000000000000000000000000..f74e5463ee41cc7606c81d512e6e9a164721305f --- /dev/null +++ b/images/Shaft_02228.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:717c72b455462a446a7dbfe70882a6653ffd7439b6e7b4038460a208f6215da5 +size 70777 diff --git a/images/Shaft_02229.png b/images/Shaft_02229.png new file mode 100644 index 0000000000000000000000000000000000000000..bc474df17e99915e7173ee54d18368e760cee945 --- /dev/null +++ b/images/Shaft_02229.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2e6d0204854de3c6f522761b1d0f59d63245037a23e5155ec001fd01a634934 +size 104276 diff --git a/images/Shaft_02230.png b/images/Shaft_02230.png new file mode 100644 index 0000000000000000000000000000000000000000..265504cfb3074b82999e49a171752ae52b6e7599 --- /dev/null +++ b/images/Shaft_02230.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4958ce636f3a5825e73f74cc6f4caa5848683104a32c52e93d944d11cec89904 +size 87579 diff --git a/images/Shaft_02231.png b/images/Shaft_02231.png new file mode 100644 index 0000000000000000000000000000000000000000..f6e4cc1c1b2a545a69ceec9f50a284d7b7961fb6 --- /dev/null +++ b/images/Shaft_02231.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26f5a4a0564278c76eda3a84925104422e293e12017468dd82facb1efa95f824 +size 79784 diff --git a/images/Shaft_02232.png b/images/Shaft_02232.png new file mode 100644 index 0000000000000000000000000000000000000000..1dc0f9621e17eb99909e10fd1bea2f48925c8327 --- /dev/null +++ b/images/Shaft_02232.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44fe8cc35b9ff921d5313e505cb64afcad354674662371ad207c3f9a702271ad +size 100759 diff --git a/images/Shaft_02233.png b/images/Shaft_02233.png new file mode 100644 index 0000000000000000000000000000000000000000..61737d26636325b8b567bed10f15a75a17b74176 --- /dev/null +++ b/images/Shaft_02233.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d8bc8a9bfef48e05baa7e0e72d1acd317bb2b610f3b60878396398064c1281a +size 79190 diff --git a/images/Shaft_02234.png b/images/Shaft_02234.png new file mode 100644 index 0000000000000000000000000000000000000000..adf161b9bf48337a95c8288ea6e2e00831fe7aff --- /dev/null +++ b/images/Shaft_02234.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20ab7f880cb5cb815085e2a4f082828e27dda5ea4c4fd3cc6ed41a41aff17266 +size 69695 diff --git a/images/Shaft_02235.png b/images/Shaft_02235.png new file mode 100644 index 0000000000000000000000000000000000000000..9d908ed45ed5e795e61170f5c5abd115178a0fda --- /dev/null +++ b/images/Shaft_02235.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90d5ca5afea24ea45917c6f7e7b1d83948f16b483b2d82f6e96b80482a79df99 +size 99397 diff --git a/images/Shaft_02236.png b/images/Shaft_02236.png new file mode 100644 index 0000000000000000000000000000000000000000..8d2c66e04206c688b1a269b58aa4e9ccf736f21d --- /dev/null +++ b/images/Shaft_02236.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:217d8351ca270c2e72693b25d53385379ee3c8f249b16a792dbea67f2b34740e +size 84424 diff --git a/images/Shaft_02237.png b/images/Shaft_02237.png new file mode 100644 index 0000000000000000000000000000000000000000..70d309f44c97f52f853d3d7d7f2865ceb864101d --- /dev/null +++ b/images/Shaft_02237.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae5a76d815f52f6d6ca71419a2a240c014310cdc53469485d309e2d5a055bf2d +size 86524 diff --git a/images/Shaft_02238.png b/images/Shaft_02238.png new file mode 100644 index 0000000000000000000000000000000000000000..2b3b266cc32e70b9ffcf6d3040c79cd620efc2ed --- /dev/null +++ b/images/Shaft_02238.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cacaf8fa1a666a16821d2f848cd555a056596bbfdea12df8d89fc89be5746784 +size 77083 diff --git a/images/Shaft_02239.png b/images/Shaft_02239.png new file mode 100644 index 0000000000000000000000000000000000000000..c4ec10168434cd9bd9dbf204243b132eafa116ea --- /dev/null +++ b/images/Shaft_02239.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c130089cf901c011eb3cdd0f1f2b5966cebe015ab0f4131e9016c8c0ea25a033 +size 74277 diff --git a/images/Shaft_02240.png b/images/Shaft_02240.png new file mode 100644 index 0000000000000000000000000000000000000000..b1dc713b9278460e68f23215eafde40a7789ef12 --- /dev/null +++ b/images/Shaft_02240.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9e9024356ed7f3140e0990946135458a90e7f5b54d1b456861e20ef025e1b1e +size 105098 diff --git a/images/Shaft_02241.png b/images/Shaft_02241.png new file mode 100644 index 0000000000000000000000000000000000000000..436dfd91f34b4e64d331c15489f9019dfb9a9099 --- /dev/null +++ b/images/Shaft_02241.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:106a81bc47f6c990f0cd384600f945a4a8cd797998ef0cdfc634a0120bbb466d +size 68971 diff --git a/images/Shaft_02242.png b/images/Shaft_02242.png new file mode 100644 index 0000000000000000000000000000000000000000..1254c93a4eef2f1eec39b68386a5345240358226 --- /dev/null +++ b/images/Shaft_02242.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48b864660d99f1ab3dd6df55bc329c18b0efa1f49fd4a569b109b2de7e2575c +size 82435 diff --git a/images/Shaft_02243.png b/images/Shaft_02243.png new file mode 100644 index 0000000000000000000000000000000000000000..ccbd6a4c607a952a60d07f956ee5169adced0058 --- /dev/null +++ b/images/Shaft_02243.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:935b3ddbc239ad456243e2446b3effaa2382aab8e7d30ff7eaac9a2842775991 +size 73430 diff --git a/images/Shaft_02244.png b/images/Shaft_02244.png new file mode 100644 index 0000000000000000000000000000000000000000..0a0832a272aea16f5f35e123b8480d14ffd0fc7f --- /dev/null +++ b/images/Shaft_02244.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27f910f66a3340933f3f063b86daf0be8767a8be1b692b7e2250e7c3d160db51 +size 70311 diff --git a/images/Shaft_02245.png b/images/Shaft_02245.png new file mode 100644 index 0000000000000000000000000000000000000000..355bb4d0255a2015bea945e4a96ce4fc658216d2 --- /dev/null +++ b/images/Shaft_02245.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d83c5f591015af2d354bc7659d658ca696098b46323990b1fbff30544a31623 +size 85513 diff --git a/images/Shaft_02246.png b/images/Shaft_02246.png new file mode 100644 index 0000000000000000000000000000000000000000..0b60e247095f6e70129a5699a6ecee5e57a1ddcd --- /dev/null +++ b/images/Shaft_02246.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb8f627e2ad019131040a91753c914e4447855cb0020701646f75bb466af0bc1 +size 88165 diff --git a/images/Shaft_02247.png b/images/Shaft_02247.png new file mode 100644 index 0000000000000000000000000000000000000000..3b5d59bd6d87bc506b54026abea12a6e21ddb69b --- /dev/null +++ b/images/Shaft_02247.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40bc4cc676969cf1a014244babef1e15c3be1ed3276f82651593600c62318cd2 +size 87160 diff --git a/images/Shaft_02248.png b/images/Shaft_02248.png new file mode 100644 index 0000000000000000000000000000000000000000..8afd9e1b987b761c1bf036d0a356e52ecd29b5af --- /dev/null +++ b/images/Shaft_02248.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f02f154d5179f9c00ddc349053c51dbf519006a0a34f244c0eb1bda26fa3308f +size 99789 diff --git a/images/Shaft_02249.png b/images/Shaft_02249.png new file mode 100644 index 0000000000000000000000000000000000000000..e7f50ea50455977b2e415f7f070bc306357b67b4 --- /dev/null +++ b/images/Shaft_02249.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fec306cb26db766e4984f6f0b86d84575031f8481975beba7f738ee3fafb907a +size 91492 diff --git a/images/Shaft_02250.png b/images/Shaft_02250.png new file mode 100644 index 0000000000000000000000000000000000000000..f049306687249fb27c64850f8271eadedec0e0ba --- /dev/null +++ b/images/Shaft_02250.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce8b9ce1dcc2f4e557fa7e00a18f6b9f053f4125e144fce641708af1dd8d37e6 +size 78142 diff --git a/images/Shaft_02251.png b/images/Shaft_02251.png new file mode 100644 index 0000000000000000000000000000000000000000..0f74955efd6ab993b2119e9c5d1170a58686e2e0 --- /dev/null +++ b/images/Shaft_02251.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5af45652d0731c44a14cb965c59a9887bcb7113b32b73b58edf502402e8442ec +size 72661 diff --git a/images/Shaft_02252.png b/images/Shaft_02252.png new file mode 100644 index 0000000000000000000000000000000000000000..42cc4047bd8351856fb785e347b8926695a68ef9 --- /dev/null +++ b/images/Shaft_02252.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d1f34c5446e629eb434f2cbe105c0a0b7aa5f29ba56508a83aaefe5bd2e1ced +size 92832 diff --git a/images/Shaft_02253.png b/images/Shaft_02253.png new file mode 100644 index 0000000000000000000000000000000000000000..a8aacb8c8bb1d1e0d1323e6db146a8508956af7a --- /dev/null +++ b/images/Shaft_02253.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcb32f512732fedb436eb8437f704a93dd7bc6872aaf19da2aa5bc572a9b3b87 +size 85193 diff --git a/images/Shaft_02254.png b/images/Shaft_02254.png new file mode 100644 index 0000000000000000000000000000000000000000..6e767515a721b206d6082b6cd43e96af3533b3cd --- /dev/null +++ b/images/Shaft_02254.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13db5a4bdebb6019f7614c82006723b1b3f396e3e75f3499478fdcb0165e185b +size 93754 diff --git a/images/Shaft_02255.png b/images/Shaft_02255.png new file mode 100644 index 0000000000000000000000000000000000000000..936969d7f30e0836532cf732de4a4a73911228a1 --- /dev/null +++ b/images/Shaft_02255.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c9c3f2a6e7474accf7fbc099e163e7ae75109a780606971b0f49a3b99a984e1 +size 81576 diff --git a/images/Shaft_02256.png b/images/Shaft_02256.png new file mode 100644 index 0000000000000000000000000000000000000000..410d66618e17d23c08d93f92e178b13b2d7c6396 --- /dev/null +++ b/images/Shaft_02256.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d554d9b39f8dd77d48d32a14bab75abb64f45199bcc7dee957d0bc5aac7865c8 +size 101613 diff --git a/images/Shaft_02257.png b/images/Shaft_02257.png new file mode 100644 index 0000000000000000000000000000000000000000..252b1deafca08f60aaf2c0e70b5ba343100d2bc8 --- /dev/null +++ b/images/Shaft_02257.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:905106c14a2675688371a669d3b48c03882ae18e80ef8da9f89a857f4920584c +size 100946 diff --git a/images/Shaft_02258.png b/images/Shaft_02258.png new file mode 100644 index 0000000000000000000000000000000000000000..5a6e3ba65fa45ad1f6a60d853b1d5501f3c52502 --- /dev/null +++ b/images/Shaft_02258.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6da5077fc35b0e077c43db5c40976e9cfcc259886f985e8a51158f864bbb8cc +size 89308 diff --git a/images/Shaft_02259.png b/images/Shaft_02259.png new file mode 100644 index 0000000000000000000000000000000000000000..05ed45c76728d44034fab06dfd47587b30b6bb79 --- /dev/null +++ b/images/Shaft_02259.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f68246376d4d01cc5c8e3faffc3c8c263dbc9befacc6b91f313358ee2c40efd9 +size 81074 diff --git a/images/Shaft_02260.png b/images/Shaft_02260.png new file mode 100644 index 0000000000000000000000000000000000000000..988b820ec4112d2761f7fba2b2684277a95825b7 --- /dev/null +++ b/images/Shaft_02260.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1aae9802190c117ec8ddbd7d43017b6252082ec9e6b838ea62f2d117f6b5ddc +size 75781 diff --git a/images/Shaft_02261.png b/images/Shaft_02261.png new file mode 100644 index 0000000000000000000000000000000000000000..5eeac051f9c675cf6969e60ddd576fc493a665e0 --- /dev/null +++ b/images/Shaft_02261.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:164d5eaf602e87d004d18188addbdc7a921e9a93975eb1e06e7fe743213bdfb0 +size 72430 diff --git a/images/Shaft_02262.png b/images/Shaft_02262.png new file mode 100644 index 0000000000000000000000000000000000000000..fb1cb431c53fa3702f3a96b870fbda41e22c7b0f --- /dev/null +++ b/images/Shaft_02262.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b0c59c45e88bf2f4a1ace342460a51495313c37299701d32fbfd77800f04d09 +size 111844 diff --git a/images/Shaft_02263.png b/images/Shaft_02263.png new file mode 100644 index 0000000000000000000000000000000000000000..ccb5ea36974767e012635b678ffbb0c08fdcd6f3 --- /dev/null +++ b/images/Shaft_02263.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e437af982607fa3e5c9674ef5a06ebebd31e4f098c8fd12c3eda856b476c45d +size 80455 diff --git a/images/Shaft_02264.png b/images/Shaft_02264.png new file mode 100644 index 0000000000000000000000000000000000000000..bfb6e5facbacd29ed634e8bc5a72ecbe23602ab0 --- /dev/null +++ b/images/Shaft_02264.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c717f67a9163ccec7c16d4ed1a93e0861196e659b8fc6ecd62448e359984ea7 +size 91319 diff --git a/images/Shaft_02265.png b/images/Shaft_02265.png new file mode 100644 index 0000000000000000000000000000000000000000..809ac6e89dcd7282a511da77085e70719e8c0d57 --- /dev/null +++ b/images/Shaft_02265.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b51aba2cc22886b4de257a501f77e07b852d929880d9338d9242fbacb0c5cca +size 96896 diff --git a/images/Shaft_02266.png b/images/Shaft_02266.png new file mode 100644 index 0000000000000000000000000000000000000000..294ccda91a3afca8fcb6aae4f57200ef53e02257 --- /dev/null +++ b/images/Shaft_02266.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93990330658ce2ffaf6195f51e996f28dee4a1e11491f219232bd44b2959b5d1 +size 81970 diff --git a/images/Shaft_02267.png b/images/Shaft_02267.png new file mode 100644 index 0000000000000000000000000000000000000000..004aa03bdb38eddbea789d8bf72e6c9492338e36 --- /dev/null +++ b/images/Shaft_02267.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fdb62355f90e8ed540f28e34718e909f0d38eb269f9d3be1593c60bd314d9a1 +size 106552 diff --git a/images/Shaft_02268.png b/images/Shaft_02268.png new file mode 100644 index 0000000000000000000000000000000000000000..520b2058886004b7d45b5818437a7640299093eb --- /dev/null +++ b/images/Shaft_02268.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:706d9099f49071b009cd86e48d5bf90e1f2bad40b740289120fc9bdab3e970f4 +size 73544 diff --git a/images/Shaft_02269.png b/images/Shaft_02269.png new file mode 100644 index 0000000000000000000000000000000000000000..f02b9ca9e2d829ed77a7ff656b4284dd755df198 --- /dev/null +++ b/images/Shaft_02269.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:234b2cb87ad65c51bffa3525cd9f7a1d698b93102eafb4bc45173ad649a7b3dc +size 91562 diff --git a/images/Shaft_02270.png b/images/Shaft_02270.png new file mode 100644 index 0000000000000000000000000000000000000000..0e4a98f7f8b09bd6f0bb795997eace371f32c275 --- /dev/null +++ b/images/Shaft_02270.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8ac3470ff9f8cc0fbee3d29e6c908042837fbd6b9b6fc076b7fe9ae7a40ed90 +size 82014 diff --git a/images/Shaft_02271.png b/images/Shaft_02271.png new file mode 100644 index 0000000000000000000000000000000000000000..2dff585c9d365ad2daabf157bcc0698fb9067b69 --- /dev/null +++ b/images/Shaft_02271.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e473706b0a82bcc10d79e04efb5bba00a7ce5b06692db818571f596ed31f3436 +size 72522 diff --git a/images/Shaft_02272.png b/images/Shaft_02272.png new file mode 100644 index 0000000000000000000000000000000000000000..2a919abdeb567a528a33b30953873b0d50eb24c9 --- /dev/null +++ b/images/Shaft_02272.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07603d185ea38112865fd25632d71251c383f245f6040de55cb25908ebff003c +size 84921 diff --git a/images/Shaft_02273.png b/images/Shaft_02273.png new file mode 100644 index 0000000000000000000000000000000000000000..04ab41eefe9855ee0c0694e94b8e26c1d9fdef62 --- /dev/null +++ b/images/Shaft_02273.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8b03094823555bd5e059704ebd9ad88fb99991e9ded37058b9672251a0d617e +size 84488 diff --git a/images/Shaft_02274.png b/images/Shaft_02274.png new file mode 100644 index 0000000000000000000000000000000000000000..6d7f656cbaa06d3a0e91530f8820670d2b699264 --- /dev/null +++ b/images/Shaft_02274.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c98a09eec1df5a0095c3f4704449d92852c6e567aea88c95e2f9631ef47dac30 +size 91058 diff --git a/images/Shaft_02275.png b/images/Shaft_02275.png new file mode 100644 index 0000000000000000000000000000000000000000..b25b4cab7f168226d4c6535683ee7aeaa5bef209 --- /dev/null +++ b/images/Shaft_02275.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f1b52f33f2e406dd2697ada6100d9b72a464c96dc46c3ed59a9af22f666980e +size 69589 diff --git a/images/Shaft_02276.png b/images/Shaft_02276.png new file mode 100644 index 0000000000000000000000000000000000000000..ea0906dd8bab1a0996d1248cd1220b07de16d5d5 --- /dev/null +++ b/images/Shaft_02276.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97cd693b7147b78fbeacdc2aee045790f4e260052dba7692069da894c0803796 +size 87772 diff --git a/images/Shaft_02277.png b/images/Shaft_02277.png new file mode 100644 index 0000000000000000000000000000000000000000..dce87e742ddf37ef2a17532be1970d77b4375103 --- /dev/null +++ b/images/Shaft_02277.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fb42c5d7edd5c06bd20e848545f46d74dfd2104accf5c548ee105495d59226e +size 89446 diff --git a/images/Shaft_02278.png b/images/Shaft_02278.png new file mode 100644 index 0000000000000000000000000000000000000000..d470725e64d211ecad4bf518ae5605163284d771 --- /dev/null +++ b/images/Shaft_02278.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03231de00db0efa151b2618e660021c378fac1805f4f2d413c8c7e8933cd4be4 +size 82165 diff --git a/images/Shaft_02279.png b/images/Shaft_02279.png new file mode 100644 index 0000000000000000000000000000000000000000..1e66aeca895f1bd4f7231bfa8700c7982157e2b3 --- /dev/null +++ b/images/Shaft_02279.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c11493f764499f6ba5bbc0c3ba6a78b8a34c9cdfca4c0516bd09ef47f7c5c1b +size 74694 diff --git a/images/Shaft_02280.png b/images/Shaft_02280.png new file mode 100644 index 0000000000000000000000000000000000000000..f5986c43570710cd76cd300c981d0ad0d144f0ed --- /dev/null +++ b/images/Shaft_02280.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f896c75c395d530856803c9879c4e1998f34fe4dae5a6f960290f44eadbeee3 +size 89950 diff --git a/images/Shaft_02281.png b/images/Shaft_02281.png new file mode 100644 index 0000000000000000000000000000000000000000..4c5c44cb68df7dc52e6e307fcca78dc23a93b5fa --- /dev/null +++ b/images/Shaft_02281.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6056c525e9c84e4484052b84ce61f31f0db6cb567e6cfc29905906a84f03095 +size 90816 diff --git a/images/Shaft_02282.png b/images/Shaft_02282.png new file mode 100644 index 0000000000000000000000000000000000000000..ed7ec0d87ac68c3c60e056c094dc374a91cdea12 --- /dev/null +++ b/images/Shaft_02282.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5aa8912c145c41611730b016c6b17fdd36f45b6de0c994fb8fa55d9de293586c +size 105905 diff --git a/images/Shaft_02283.png b/images/Shaft_02283.png new file mode 100644 index 0000000000000000000000000000000000000000..32d9558c1a555a285c64516e6321d84f78610595 --- /dev/null +++ b/images/Shaft_02283.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ce8960e71c74aa120bb8412bc321bb161d7ae8310ed10e5da0085d8120e7bb2 +size 107784 diff --git a/images/Shaft_02284.png b/images/Shaft_02284.png new file mode 100644 index 0000000000000000000000000000000000000000..6de984031d9c9eeefe3b2e93dcfcad896bfc2a04 --- /dev/null +++ b/images/Shaft_02284.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bea3d4d407c01e2087c07b2258923b72f42cb8c4351506298712101f42bb4da6 +size 69900 diff --git a/images/Shaft_02285.png b/images/Shaft_02285.png new file mode 100644 index 0000000000000000000000000000000000000000..28bf44b7d7a723e52f67fedc85b6bcaed98df923 --- /dev/null +++ b/images/Shaft_02285.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:847ed18b4f2aed94fd492fc31c278fa052f555a41ec22a379c4e883991e85f92 +size 104780 diff --git a/images/Shaft_02286.png b/images/Shaft_02286.png new file mode 100644 index 0000000000000000000000000000000000000000..9576720c1ea6e9f203e5d206dcbf31c2a3ef859f --- /dev/null +++ b/images/Shaft_02286.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd92ddc79fc1c2782c2026214721be8fdd464a9c74b8a4fd33a914047247df17 +size 91856 diff --git a/images/Shaft_02287.png b/images/Shaft_02287.png new file mode 100644 index 0000000000000000000000000000000000000000..1cce5d8bc68cc296cafbb5fd923bb34c48530d13 --- /dev/null +++ b/images/Shaft_02287.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed74aaa87653ad9c19bb8e09497cc2dc60d0661eddd0893ac915237d433b423e +size 85140 diff --git a/images/Shaft_02288.png b/images/Shaft_02288.png new file mode 100644 index 0000000000000000000000000000000000000000..6deeab1fd9233295778424b0cf317f71ed1b7a4d --- /dev/null +++ b/images/Shaft_02288.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c53d7825ede5dc336d0bd9de0a3269144a4701237356ff1f0c55c65b381587a7 +size 98545 diff --git a/images/Shaft_02289.png b/images/Shaft_02289.png new file mode 100644 index 0000000000000000000000000000000000000000..280116da04685dc82bd63dd453e2543a761e8bf4 --- /dev/null +++ b/images/Shaft_02289.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7164c6559d317c98c453bf03e9977b831dc04340faaa891ef487e43b8a6e87c5 +size 91483 diff --git a/images/Shaft_02290.png b/images/Shaft_02290.png new file mode 100644 index 0000000000000000000000000000000000000000..dbec7acf94d0692f483de52e6a27ca49b275606b --- /dev/null +++ b/images/Shaft_02290.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:362e98678cdd14d069a9c11816a3cbb42378144f8256cd2bced5b5124b1cf769 +size 80857 diff --git a/images/Shaft_02291.png b/images/Shaft_02291.png new file mode 100644 index 0000000000000000000000000000000000000000..8f09637985175d2a760d9dd28d3b3e2849dda078 --- /dev/null +++ b/images/Shaft_02291.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5cdabaf2f83942a42e194ed3781b381a847f07a602b16d780443f784aabc1a8 +size 73049 diff --git a/images/Shaft_02292.png b/images/Shaft_02292.png new file mode 100644 index 0000000000000000000000000000000000000000..6e756ef1e74a91ec2a97bd75b8fb2f77ab3e0d6b --- /dev/null +++ b/images/Shaft_02292.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd123865b107bffaaef58390d4cfd6f9f17f967a91ee029abc9342a7968076fd +size 94839 diff --git a/images/Shaft_02293.png b/images/Shaft_02293.png new file mode 100644 index 0000000000000000000000000000000000000000..b75f0b0f48a87ecf13da2bd187a9d631b3213262 --- /dev/null +++ b/images/Shaft_02293.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7de1ae4311bcc5b0676478fa5342f7b49d70f67aa14c09d9cad0127b6ecfc30 +size 102282 diff --git a/images/Shaft_02294.png b/images/Shaft_02294.png new file mode 100644 index 0000000000000000000000000000000000000000..51371c2dc3b070c18fd6c598943b50f57af7c77e --- /dev/null +++ b/images/Shaft_02294.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a19b91f9d86da2d5f4410c6f2bf9114f5493a66f537e09147e2156e72ee14e15 +size 111748 diff --git a/images/Shaft_02295.png b/images/Shaft_02295.png new file mode 100644 index 0000000000000000000000000000000000000000..b95ff8d8be65aa9eff1f940d82069a01ba723e9c --- /dev/null +++ b/images/Shaft_02295.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e3311883fdb2c082583bd9c963687ff0bb6cd43996fc73bc41cc26d0fe4ba38 +size 92219 diff --git a/images/Shaft_02296.png b/images/Shaft_02296.png new file mode 100644 index 0000000000000000000000000000000000000000..0be20a69a38d12a2dcd2e48e254b4e4883071ce1 --- /dev/null +++ b/images/Shaft_02296.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5823baa6d2e35f0af8edae62261e13fe8e367d2b804d45995590ac16d1e790ab +size 74800 diff --git a/images/Shaft_02297.png b/images/Shaft_02297.png new file mode 100644 index 0000000000000000000000000000000000000000..4f8a143e8b97fb8937c7a9a5b8e721f2aec3ba65 --- /dev/null +++ b/images/Shaft_02297.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa94b42d3529cf51b0d48983a7aa170a740ba8643c3c74d814fe90cbe3980996 +size 93121 diff --git a/images/Shaft_02298.png b/images/Shaft_02298.png new file mode 100644 index 0000000000000000000000000000000000000000..fe0efcda1fb012f9024547806edf8358fe0d3f90 --- /dev/null +++ b/images/Shaft_02298.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddd9fd2fcfb3d49e4179d6a2523f59e29f23937a6197671d882e46052a2eaa82 +size 82661 diff --git a/images/Shaft_02299.png b/images/Shaft_02299.png new file mode 100644 index 0000000000000000000000000000000000000000..39d28027eb03bde8c29f10900bec636b5ca14927 --- /dev/null +++ b/images/Shaft_02299.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:912a587f33c7a514f0fc27e0efd09d3f89e8cc1b21ea2a21e6161c76b76d3363 +size 93910 diff --git a/images/Shaft_02300.png b/images/Shaft_02300.png new file mode 100644 index 0000000000000000000000000000000000000000..d3d89091d26fd5ead09bdf6bc1dd98f125140622 --- /dev/null +++ b/images/Shaft_02300.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebf00751c578770deb7e306ee08c4fcf8b2f85c496438175f4d1be88ce6a927a +size 115457 diff --git a/images/Shaft_02301.png b/images/Shaft_02301.png new file mode 100644 index 0000000000000000000000000000000000000000..e00890df50662a43d4dd7c35e8923770ee8ddee5 --- /dev/null +++ b/images/Shaft_02301.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8f32ecdaaa57400725c789b8dab3381a99363e266068161df42274e46422f21 +size 72548 diff --git a/images/Shaft_02302.png b/images/Shaft_02302.png new file mode 100644 index 0000000000000000000000000000000000000000..322e957eee3ab26fab2a4e2d69a28c4159674638 --- /dev/null +++ b/images/Shaft_02302.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:612cd5f7669871af33415bf948888f7f0bd561912ac3daa2d4e279f0569e20c7 +size 70962 diff --git a/images/Shaft_02303.png b/images/Shaft_02303.png new file mode 100644 index 0000000000000000000000000000000000000000..37a1dc48accc415c50dcc90e387a448956a1a21a --- /dev/null +++ b/images/Shaft_02303.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7379cdd1d5f2272f17730552001d2417a44ef7ae56f093c05ca0f2d5403c8669 +size 112457 diff --git a/images/Shaft_02304.png b/images/Shaft_02304.png new file mode 100644 index 0000000000000000000000000000000000000000..365f41f85f7acc26e6de69202a30fa033b7506dd --- /dev/null +++ b/images/Shaft_02304.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:887849c178e460e497fb8df7eaf5a89b98d42dd06b8d180c17ae74fee493fd9a +size 89711 diff --git a/images/Shaft_02305.png b/images/Shaft_02305.png new file mode 100644 index 0000000000000000000000000000000000000000..20bb3e18a84e7e50b85c8fd63135e78675a35888 --- /dev/null +++ b/images/Shaft_02305.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:803a201c9583b867ff5e30995d1def7f8c8af078e3eff81ad10b58a89b3da4e5 +size 86996 diff --git a/images/Shaft_02306.png b/images/Shaft_02306.png new file mode 100644 index 0000000000000000000000000000000000000000..7890e66f0116db7a865633f10d1130e1f34f1995 --- /dev/null +++ b/images/Shaft_02306.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:632be1294a274b86c8af03aabfd36fb4d7f9209ec81017a5f1c18c1143005cc8 +size 92368 diff --git a/images/Shaft_02307.png b/images/Shaft_02307.png new file mode 100644 index 0000000000000000000000000000000000000000..c06632cc07143176981551f70705c69203ab32a3 --- /dev/null +++ b/images/Shaft_02307.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32b3c9ab088d18b3d6a5d816938c4f837d9ebee084223d7f4c8311bc112596c8 +size 75706 diff --git a/images/Shaft_02308.png b/images/Shaft_02308.png new file mode 100644 index 0000000000000000000000000000000000000000..2de9e9fd44ac098d6bbcd7c9f44d759917492cda --- /dev/null +++ b/images/Shaft_02308.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db8d4449a325a9ea1e50ae86b0472e5bc19ac334b3861c55f1b1b7162895a2fd +size 109866 diff --git a/images/Shaft_02309.png b/images/Shaft_02309.png new file mode 100644 index 0000000000000000000000000000000000000000..d902936c1b4985be3ad8e1f8c968f152ce198327 --- /dev/null +++ b/images/Shaft_02309.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa881e770340e350bc7487bd5829630357b29d8fcfef2f9383075cd082562204 +size 73159 diff --git a/images/Shaft_02310.png b/images/Shaft_02310.png new file mode 100644 index 0000000000000000000000000000000000000000..3399b1c22762e3eff3e4107525f2f146091fb285 --- /dev/null +++ b/images/Shaft_02310.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d18c12129e9511b01c7b0bcae34c16777bb5f01759a763334785c9d085b18fd8 +size 79691 diff --git a/images/Shaft_02311.png b/images/Shaft_02311.png new file mode 100644 index 0000000000000000000000000000000000000000..9c1a25962ec6f1266f37a88c35db3bfa03740d2c --- /dev/null +++ b/images/Shaft_02311.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:279cf96d53955f0221d145431612b2189c0414859b5da761ee3764c434956cde +size 80665 diff --git a/images/Shaft_02312.png b/images/Shaft_02312.png new file mode 100644 index 0000000000000000000000000000000000000000..b03da02ddeb95f4a495a8093093077e02811b981 --- /dev/null +++ b/images/Shaft_02312.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d27323cc692c350bcf6517b0a20e333cd43a05d150f37095024c9b88714b7fd +size 87375 diff --git a/images/Shaft_02313.png b/images/Shaft_02313.png new file mode 100644 index 0000000000000000000000000000000000000000..d7d1083ec96168105315ba8da94bd46a6791364a --- /dev/null +++ b/images/Shaft_02313.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1836450e63d8c76d74d8bbe373ddbc47c27b6c98a66fec4000e61a44cab367db +size 103022 diff --git a/images/Shaft_02314.png b/images/Shaft_02314.png new file mode 100644 index 0000000000000000000000000000000000000000..a9d496259bdd4cee9652aaa7c9887b489cc9b073 --- /dev/null +++ b/images/Shaft_02314.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2543d0ca0f12efe5f2033341524a740d0b40b81c8e3654447927658a51d37334 +size 86919 diff --git a/images/Shaft_02315.png b/images/Shaft_02315.png new file mode 100644 index 0000000000000000000000000000000000000000..d8340d8fca3e43063bee521640f396692fe34243 --- /dev/null +++ b/images/Shaft_02315.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c3cbcf2acf9b81082fa32395dc100fed669b33b6a531532ae5ff1badd16b611 +size 97335 diff --git a/images/Shaft_02316.png b/images/Shaft_02316.png new file mode 100644 index 0000000000000000000000000000000000000000..94756a7583358207a297b41763f92fb8bdb74d2a --- /dev/null +++ b/images/Shaft_02316.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bfbfcd1239e4dfadc0caec32dc106c1a66ad647ca3474d52ac7b10df6e6065f1 +size 78029 diff --git a/images/Shaft_02317.png b/images/Shaft_02317.png new file mode 100644 index 0000000000000000000000000000000000000000..9ff537c25b85e7cd10770564642118f1ed0e193c --- /dev/null +++ b/images/Shaft_02317.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19bb3ff3aa1a3077d30c8610aea17a4ed0e9382c6ff1edded6c40bc67ba2d248 +size 68116 diff --git a/images/Shaft_02318.png b/images/Shaft_02318.png new file mode 100644 index 0000000000000000000000000000000000000000..0e5599ba382eda4273841b06e588c912e03c0515 --- /dev/null +++ b/images/Shaft_02318.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:838d97dfcd4049524c9a852dd541758425cd16fa20a94fde1d5b799d6bc45cd0 +size 102342 diff --git a/images/Shaft_02319.png b/images/Shaft_02319.png new file mode 100644 index 0000000000000000000000000000000000000000..737bee023e3e1a0d3dbd07e0dbeaa14840cff6b8 --- /dev/null +++ b/images/Shaft_02319.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a4486c1bd4db546cddac0b57e17fa3e83f794365db1cc712d8fe193a20f29c3 +size 75154 diff --git a/images/Shaft_02320.png b/images/Shaft_02320.png new file mode 100644 index 0000000000000000000000000000000000000000..dcc4759865a27d24ae2dfb7d9db50a720c702370 --- /dev/null +++ b/images/Shaft_02320.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cb18243416e8ca5ca2bbc383223a4f49f4481bf673b512c7dd7f4b5493206f2 +size 92052 diff --git a/images/Shaft_02321.png b/images/Shaft_02321.png new file mode 100644 index 0000000000000000000000000000000000000000..6768d76a71c3ac4f2fb6155e844b7646e63f71ab --- /dev/null +++ b/images/Shaft_02321.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84afd0b51ccb0a4624b5ab83b0090ebc8c5f44dbb928b88a3d50695ba0317825 +size 101278 diff --git a/images/Shaft_02322.png b/images/Shaft_02322.png new file mode 100644 index 0000000000000000000000000000000000000000..d4c6efd47b593caafe15e055c04482fc5df68367 --- /dev/null +++ b/images/Shaft_02322.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1e60d8c53dd5ce955ae042f0c7df9c45730e822398c468dc4a35cf7ffa87490 +size 105926 diff --git a/images/Shaft_02323.png b/images/Shaft_02323.png new file mode 100644 index 0000000000000000000000000000000000000000..ac88187caa32e66d3d0e34ea12f75dfc2af51e9d --- /dev/null +++ b/images/Shaft_02323.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e46542b488bec5fb9f41fbd4ce24c6dee989740f2f520a65a6d552c645e528d9 +size 85083 diff --git a/images/Shaft_02324.png b/images/Shaft_02324.png new file mode 100644 index 0000000000000000000000000000000000000000..392cfbd64b759c19b42e56ea3d3ef927d33a0f7c --- /dev/null +++ b/images/Shaft_02324.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fba11d4a5cedd2a40ffe4857dd689c12a720c67ddd01ec3679a2dfa2b0579c6 +size 108660 diff --git a/images/Shaft_02325.png b/images/Shaft_02325.png new file mode 100644 index 0000000000000000000000000000000000000000..a17ec7366f96e3500a71b2368bcc6b130d41d429 --- /dev/null +++ b/images/Shaft_02325.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b2706f4814e8eb943a8b1b873433cb91dbf9c9a5a9a5ee58beca205e887cc59 +size 94788 diff --git a/images/Shaft_02326.png b/images/Shaft_02326.png new file mode 100644 index 0000000000000000000000000000000000000000..6f2ecd70a7b75e5459b8fd46d3e6029095e25600 --- /dev/null +++ b/images/Shaft_02326.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed66025e2ed614121681422a80ab9bdb9c5d65d394334442cf73fda30ddf4cec +size 85536 diff --git a/images/Shaft_02327.png b/images/Shaft_02327.png new file mode 100644 index 0000000000000000000000000000000000000000..0b57db41567d0651d63ee7cf4194e0463d874115 --- /dev/null +++ b/images/Shaft_02327.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82649a393628bdd3a4777d6ac075ec502116aaa49a538c18f93adbff3b592038 +size 92022 diff --git a/images/Shaft_02328.png b/images/Shaft_02328.png new file mode 100644 index 0000000000000000000000000000000000000000..6865e424b6ca94bc5385487ecf1d0143a3924ecd --- /dev/null +++ b/images/Shaft_02328.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14e712e64ec0df2d87a38e7d1fb0501ed031926ad0d42e746f7fc34eccc54d8d +size 76804 diff --git a/images/Shaft_02329.png b/images/Shaft_02329.png new file mode 100644 index 0000000000000000000000000000000000000000..3c054f30f12e36ece9e71f2afc53804fafed3ad9 --- /dev/null +++ b/images/Shaft_02329.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6bf74b4636c341f61a5676cd13e7804bd1e030931ef8ad11f919785d8b754a3 +size 102283 diff --git a/images/Shaft_02330.png b/images/Shaft_02330.png new file mode 100644 index 0000000000000000000000000000000000000000..b1871f814d024dee6ae990191b575a0f974e2d25 --- /dev/null +++ b/images/Shaft_02330.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8296fe3ea744feb5f0fd61fb9f8e8101f25abc055543e2aabfd8edee174641ee +size 86247 diff --git a/images/Shaft_02331.png b/images/Shaft_02331.png new file mode 100644 index 0000000000000000000000000000000000000000..64ab015de8470a87189231fdb8d3657a6772ad7b --- /dev/null +++ b/images/Shaft_02331.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c006dcad69f36abd0be30601d4c56899cf77dacbc4637724278bd9fbfea4bc1 +size 71109 diff --git a/images/Shaft_02332.png b/images/Shaft_02332.png new file mode 100644 index 0000000000000000000000000000000000000000..5eefa5d65f8ad93cd4240cad5b546b230af852f5 --- /dev/null +++ b/images/Shaft_02332.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f260c24135ce65aefaf562f921e88f7c8db2a1df6de47d4fdc4b3119d376b0e +size 109306 diff --git a/images/Shaft_02333.png b/images/Shaft_02333.png new file mode 100644 index 0000000000000000000000000000000000000000..1002bf0b6e20319981768b62ef880057169889c9 --- /dev/null +++ b/images/Shaft_02333.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f0a09aa2c68464a32aa733f27a450e0c01b83b6ffed5ca21759dd476a436c23 +size 92546 diff --git a/images/Shaft_02334.png b/images/Shaft_02334.png new file mode 100644 index 0000000000000000000000000000000000000000..a9f88088b429a9880e34e7888d592e1d213f9ed9 --- /dev/null +++ b/images/Shaft_02334.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebdd0a1d7c36ae8de503aaa591ca05d4ab39982fabd89db450c41e8e11712171 +size 92393 diff --git a/images/Shaft_02335.png b/images/Shaft_02335.png new file mode 100644 index 0000000000000000000000000000000000000000..ef7fa064fa04b47270509ded378d9422f6ea4b31 --- /dev/null +++ b/images/Shaft_02335.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc0d779cdd43ba9c725db08eb88cf3a378f6f35e2b474f81967755297a5d5b52 +size 90898 diff --git a/images/Shaft_02336.png b/images/Shaft_02336.png new file mode 100644 index 0000000000000000000000000000000000000000..217cecd559c31eaac7e0c874f2fdac0ba9dc7620 --- /dev/null +++ b/images/Shaft_02336.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90e31d62f505561f645ba0c4df36b10b96a4153f6eb19007316f802df1981c0a +size 76296 diff --git a/images/Shaft_02337.png b/images/Shaft_02337.png new file mode 100644 index 0000000000000000000000000000000000000000..ebb6e32f6ccc64ee578b1426e448a5af8aa4fa7e --- /dev/null +++ b/images/Shaft_02337.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d55f925d5d628923a1f0b6f8a35bb6a1250491311408e28d836906e31e0448b6 +size 93906 diff --git a/images/Shaft_02338.png b/images/Shaft_02338.png new file mode 100644 index 0000000000000000000000000000000000000000..c784a058ad9cf0028099f047c4273fef3ebde33d --- /dev/null +++ b/images/Shaft_02338.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30457a9c94d4923f5a95250fc5dea5b10d7a3ff5b1067524f1a465c209086b7a +size 75473 diff --git a/images/Shaft_02339.png b/images/Shaft_02339.png new file mode 100644 index 0000000000000000000000000000000000000000..8f6919229d0c89ef21e3d94736cc4c0135250055 --- /dev/null +++ b/images/Shaft_02339.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:370e650527b0c3aaee7311c9dc7d66d147de2fa20544dcbf977164655eeef553 +size 78357 diff --git a/images/Shaft_02340.png b/images/Shaft_02340.png new file mode 100644 index 0000000000000000000000000000000000000000..2a6e63ce2f289863f163c44c287752387f0b9008 --- /dev/null +++ b/images/Shaft_02340.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2f19aa945eab52016f14e50628ba6a13fa900c57d251817bf0ef28c1c0ece46 +size 74665 diff --git a/images/Shaft_02341.png b/images/Shaft_02341.png new file mode 100644 index 0000000000000000000000000000000000000000..f85064bd4ce6e7c20b8226672db50eb1996ef889 --- /dev/null +++ b/images/Shaft_02341.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd0bce4770eaafce36e68e92b40303df0e58716baaad14769c8a2abff1761b80 +size 100700 diff --git a/images/Shaft_02342.png b/images/Shaft_02342.png new file mode 100644 index 0000000000000000000000000000000000000000..9f5ea300db7b15fb876fcd7d5a6d96ada8a4cd00 --- /dev/null +++ b/images/Shaft_02342.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0ddef40c940882c4955fc3db8ead06c3d95e54b57536b7a79487cbf041c1b4a +size 72685 diff --git a/images/Shaft_02343.png b/images/Shaft_02343.png new file mode 100644 index 0000000000000000000000000000000000000000..f96eb6cd7b4868e45b6cd2dc2f849e7e57683e86 --- /dev/null +++ b/images/Shaft_02343.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e02fb9db2ba01abb835c83c73a4ccd20a020f9ce3232aed0f0885979f823b6a2 +size 87672 diff --git a/images/Shaft_02344.png b/images/Shaft_02344.png new file mode 100644 index 0000000000000000000000000000000000000000..cf7b2849d25770c887a4c355047b5ed1e435b513 --- /dev/null +++ b/images/Shaft_02344.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03a1e4aa199c3b7c780f8f4a1d8f7f0416cf6bd6b729ac8d1fefd22f9fa0545a +size 76801 diff --git a/images/Shaft_02345.png b/images/Shaft_02345.png new file mode 100644 index 0000000000000000000000000000000000000000..4e9cf2f769f67532b1649f94e9953f715a703f96 --- /dev/null +++ b/images/Shaft_02345.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bba036fd4330ac8a569a0553e8973fe7b9952a44fce79909e567b6eae38bcad1 +size 80057 diff --git a/images/Shaft_02346.png b/images/Shaft_02346.png new file mode 100644 index 0000000000000000000000000000000000000000..d963f18e620951292dd97e7842ff4106d383a80e --- /dev/null +++ b/images/Shaft_02346.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55a7026a87cfae7eba6f07984dae79430e5a41c83ceaeba78b61325c721dcc34 +size 90893 diff --git a/images/Shaft_02347.png b/images/Shaft_02347.png new file mode 100644 index 0000000000000000000000000000000000000000..9b4a083b304a6ec777a05dc453abcb674f711248 --- /dev/null +++ b/images/Shaft_02347.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1a4c02c5bb534bbf5db4a04f2f0addf43cb0988ad485a79d91a7351f2664763 +size 77974 diff --git a/images/Shaft_02348.png b/images/Shaft_02348.png new file mode 100644 index 0000000000000000000000000000000000000000..59a5627ad19f1a53f9adad9e19bfd6d3d60ab8c3 --- /dev/null +++ b/images/Shaft_02348.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14f439456dbbbb531d9f2ce7b9878b3a53c738cf81031674fe57c74129cafece +size 103570 diff --git a/images/Shaft_02349.png b/images/Shaft_02349.png new file mode 100644 index 0000000000000000000000000000000000000000..cc99539df5f4cefe1c7dab251b384a757b2dd910 --- /dev/null +++ b/images/Shaft_02349.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db18127475567eb82722ea6c964228d5884153629fe88a50473bb8da7c0c8427 +size 79273 diff --git a/images/Shaft_02350.png b/images/Shaft_02350.png new file mode 100644 index 0000000000000000000000000000000000000000..a940c150f7c732682df966065c201936dc7646b6 --- /dev/null +++ b/images/Shaft_02350.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d95cb944fffdef9eb4755bd9bb9a8a3d09812a04c0a643fb54ff66dd723519df +size 80939 diff --git a/images/Shaft_02351.png b/images/Shaft_02351.png new file mode 100644 index 0000000000000000000000000000000000000000..814a33d32fe40b74c9d9e91451a9b2999f022fe6 --- /dev/null +++ b/images/Shaft_02351.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff8949e1d26fd7938b7ed87a2e702dd777960189cb2e5dac4155e47ac50cc0a1 +size 86502 diff --git a/images/Shaft_02352.png b/images/Shaft_02352.png new file mode 100644 index 0000000000000000000000000000000000000000..77b8a83ebee3e1045e5ae468780a15eaf390ce18 --- /dev/null +++ b/images/Shaft_02352.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ef15a054090a8d7ab7f751ea840cd9b856909a0858ee6746ece76fde5b9aaba +size 90389 diff --git a/images/Shaft_02353.png b/images/Shaft_02353.png new file mode 100644 index 0000000000000000000000000000000000000000..adc55a180ff545299498b54207278b3ae0819fee --- /dev/null +++ b/images/Shaft_02353.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6eecbaa020d227564565201bc79ea13225f6410f99c3bae67b9f908632e5d45f +size 86903 diff --git a/images/Shaft_02354.png b/images/Shaft_02354.png new file mode 100644 index 0000000000000000000000000000000000000000..8972bce061004e7ac48442f6fa28429b0fee2009 --- /dev/null +++ b/images/Shaft_02354.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9308badb387f18179d72836544dd4bc9e4c6caec8633e01218c496d7b4ad20ec +size 69857 diff --git a/images/Shaft_02355.png b/images/Shaft_02355.png new file mode 100644 index 0000000000000000000000000000000000000000..6c2a7686b5873ff0391db16353818239e9918cbc --- /dev/null +++ b/images/Shaft_02355.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8345d390b094ce1a8fcd1c00427c76afd004498afa09595657efd028a63cf4ec +size 105531 diff --git a/images/Shaft_02356.png b/images/Shaft_02356.png new file mode 100644 index 0000000000000000000000000000000000000000..7cd1436673bc85af5b657fa22d8b2d8e7bb89e78 --- /dev/null +++ b/images/Shaft_02356.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e5895077a462e0b84e9f8a573cefb97ebf2729e620c46675f25d2a38289b40d +size 94308 diff --git a/images/Shaft_02357.png b/images/Shaft_02357.png new file mode 100644 index 0000000000000000000000000000000000000000..d7a5c29081369dc410738b610fa60d4dc255d926 --- /dev/null +++ b/images/Shaft_02357.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:023453f0d97a746176f174f16a132daa36fcea1b63162db05bcd9cfe1507fe43 +size 81886 diff --git a/images/Shaft_02358.png b/images/Shaft_02358.png new file mode 100644 index 0000000000000000000000000000000000000000..694cd1f560e37ea0ab387d7db516ae361d0f8783 --- /dev/null +++ b/images/Shaft_02358.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d63c766749f1663bb93ecd221a281f5c3cafa95d4e0821387b09b948df355eb3 +size 86736 diff --git a/images/Shaft_02359.png b/images/Shaft_02359.png new file mode 100644 index 0000000000000000000000000000000000000000..9b9fe7571ac9a58e967df9e82a9bd0f5e793b0c6 --- /dev/null +++ b/images/Shaft_02359.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1235e84092603546b8465df0bc8605fd584d658edd1fa3c3db4c180d538cf59f +size 93278 diff --git a/images/Shaft_02360.png b/images/Shaft_02360.png new file mode 100644 index 0000000000000000000000000000000000000000..8d35fb9658ab0b7ddc4607e29524c42cd3a67af3 --- /dev/null +++ b/images/Shaft_02360.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84c03fe8131d0ff6b89d6ddda8abe1724963ea8599cb5630912db189cbc88f90 +size 103176 diff --git a/images/Shaft_02361.png b/images/Shaft_02361.png new file mode 100644 index 0000000000000000000000000000000000000000..c29dc3448d55cd7bf65f8ff9aa50ef45b13c9edb --- /dev/null +++ b/images/Shaft_02361.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ed5d99002ab9b5e0d32183d537a4f64b5b508b73dd1a430a143cf1ce5494287 +size 95406 diff --git a/images/Shaft_02362.png b/images/Shaft_02362.png new file mode 100644 index 0000000000000000000000000000000000000000..56c02e21a0ada13633d512a1b1543c5e06958481 --- /dev/null +++ b/images/Shaft_02362.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:218e3d5cd7cf9290377d7f3c22ccd02ad245ee0e31a68b4697dbb264408249f6 +size 101141 diff --git a/images/Shaft_02363.png b/images/Shaft_02363.png new file mode 100644 index 0000000000000000000000000000000000000000..693e307652f5030bbb1ce9a149a46d9a5ca88886 --- /dev/null +++ b/images/Shaft_02363.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f27fdc29436547ed1a4c507b06c44c2f355c5791f991c175df70b2d56c09ea84 +size 86918 diff --git a/images/Shaft_02364.png b/images/Shaft_02364.png new file mode 100644 index 0000000000000000000000000000000000000000..236701dc6473658795f5bb4bb751425d0949a6e6 --- /dev/null +++ b/images/Shaft_02364.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29c6cbe915cdc0b185019791336a42496bcf4d6c09e31013b040a2ab3002b858 +size 81491 diff --git a/images/Shaft_02365.png b/images/Shaft_02365.png new file mode 100644 index 0000000000000000000000000000000000000000..82e145b575adc1aa60783eab36b460ec11437660 --- /dev/null +++ b/images/Shaft_02365.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af6ceded784c8bd85766c49615e6cfcbb047bfaa6680b6b0edd937caf20aabd9 +size 86438 diff --git a/images/Shaft_02366.png b/images/Shaft_02366.png new file mode 100644 index 0000000000000000000000000000000000000000..bf1fc6b881689f4957059484cb5acc887c6ac640 --- /dev/null +++ b/images/Shaft_02366.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d7bd4eaafeaed052dfdf6a32046e0ebc2150ac821a67ba80bdced942b823af4 +size 105588 diff --git a/images/Shaft_02367.png b/images/Shaft_02367.png new file mode 100644 index 0000000000000000000000000000000000000000..645766aee1650a267cec74488d62470919a86032 --- /dev/null +++ b/images/Shaft_02367.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c2334b2f82457bb3852e2dc476f41c26594f2a514f6c6b5d1720f1d19569368 +size 76422 diff --git a/images/Shaft_02368.png b/images/Shaft_02368.png new file mode 100644 index 0000000000000000000000000000000000000000..ad15425fae6efb9840a150ac39a5021a227fcd78 --- /dev/null +++ b/images/Shaft_02368.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da77b65b89ada481e15ca97e1f494738bed00f83651b12b78182460bfa6254b2 +size 70874 diff --git a/images/Shaft_02369.png b/images/Shaft_02369.png new file mode 100644 index 0000000000000000000000000000000000000000..d1d9542c42f838c0a5f906d36ca613ef49579c85 --- /dev/null +++ b/images/Shaft_02369.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc9dde96d1b2eb810de1931285c784094b52d5d54d865ef31785180e0c089493 +size 74701 diff --git a/images/Shaft_02370.png b/images/Shaft_02370.png new file mode 100644 index 0000000000000000000000000000000000000000..6e5e2e5760c3a520ef7810c20412fe9744a445bb --- /dev/null +++ b/images/Shaft_02370.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d4aa2cfc7e33ffcd0061213dc22c7355c0daaf2a0d5c2efedd9cf390761e169 +size 90753 diff --git a/images/Shaft_02371.png b/images/Shaft_02371.png new file mode 100644 index 0000000000000000000000000000000000000000..dc4f358835ba91ea5e9c6ed3d0b4c686a3fe21b1 --- /dev/null +++ b/images/Shaft_02371.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20e6bc1c967f8a770a0dae4924e3c2eb00abca4fcae60d27cb0b78ba048dfdbb +size 91544 diff --git a/images/Shaft_02372.png b/images/Shaft_02372.png new file mode 100644 index 0000000000000000000000000000000000000000..e2c632c2a24aeeaf523a9f28abf23634bb13d44f --- /dev/null +++ b/images/Shaft_02372.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6bac660874952a13c2ddbca20543e4035214a4257ae01e9b65f8e86421827176 +size 70202 diff --git a/images/Shaft_02373.png b/images/Shaft_02373.png new file mode 100644 index 0000000000000000000000000000000000000000..001c7208dd8a631f37301fbc6b88221cc3526d23 --- /dev/null +++ b/images/Shaft_02373.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e0bb971d3cee1cc24953bbc7042d1da5e45a326a4b00154fccf0e391e781411 +size 116196 diff --git a/images/Shaft_02374.png b/images/Shaft_02374.png new file mode 100644 index 0000000000000000000000000000000000000000..4b06988a85dc323c2b1c88a423c0f13c4863c168 --- /dev/null +++ b/images/Shaft_02374.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d18a1ee4ded83222d3b2d2b7ad2c6e26cd09b42b984a6200e291ded6be9c4a7b +size 76324 diff --git a/images/Shaft_02375.png b/images/Shaft_02375.png new file mode 100644 index 0000000000000000000000000000000000000000..d35340fac5ceaf819a07713a138add0194cde717 --- /dev/null +++ b/images/Shaft_02375.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62e88dcb0392dec7091d9c9740cfc0c58631255ec8331f1e3a54d7ed14fec5f5 +size 86028 diff --git a/images/Shaft_02376.png b/images/Shaft_02376.png new file mode 100644 index 0000000000000000000000000000000000000000..4623fc2941a26b0e5fbd63b368cd1ed5cfb323e0 --- /dev/null +++ b/images/Shaft_02376.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a674fcd598ba6b1bb631c1b81af5640e533bfd5e50987bd632c50dc1c16110a +size 69130 diff --git a/images/Shaft_02377.png b/images/Shaft_02377.png new file mode 100644 index 0000000000000000000000000000000000000000..31d10f4f16d74ef41645187f50e2ff43d15c9ba3 --- /dev/null +++ b/images/Shaft_02377.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b2e999db40891a0c834794ea41086813ea793a9e2c6c15b4eb2729c3b87f7fd +size 76563 diff --git a/images/Shaft_02378.png b/images/Shaft_02378.png new file mode 100644 index 0000000000000000000000000000000000000000..1d8f8a57785145e24c18862c64911ef052a5d16d --- /dev/null +++ b/images/Shaft_02378.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef43bd2e2bbac75c50af8a5cfafbc044a055b61adeb97218af66a784c652d809 +size 91712 diff --git a/images/Shaft_02379.png b/images/Shaft_02379.png new file mode 100644 index 0000000000000000000000000000000000000000..cecd5e6a2921fff594c8332ed0ecc69762e4e14f --- /dev/null +++ b/images/Shaft_02379.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6acec26ffaa99470bd2741cafc01d9be7c1fab470ef890d1cf30a40d92ab7790 +size 81135 diff --git a/images/Shaft_02380.png b/images/Shaft_02380.png new file mode 100644 index 0000000000000000000000000000000000000000..61b53e0f3d715c51f37b687fc1ea37490e76562b --- /dev/null +++ b/images/Shaft_02380.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edd0667702a8ea260d868857f5592bf67e86d76925f26f3b7cb936805181f4b8 +size 86847 diff --git a/images/Shaft_02381.png b/images/Shaft_02381.png new file mode 100644 index 0000000000000000000000000000000000000000..5ed1a6f8aaf7ea6e6a66a1f6f633e09358cbfed5 --- /dev/null +++ b/images/Shaft_02381.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddcb5fc2a59b067bd254fee98a389832486d8b4d71d9678053453dd6aa6f67b7 +size 79580 diff --git a/images/Shaft_02382.png b/images/Shaft_02382.png new file mode 100644 index 0000000000000000000000000000000000000000..e0e6781c4c21a76d0b56cb124a0628dd2ed8df44 --- /dev/null +++ b/images/Shaft_02382.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e20793a5d41662b63073609be809760b4ff552079ef498ebdf9bc2b33e7692e4 +size 88177 diff --git a/images/Shaft_02383.png b/images/Shaft_02383.png new file mode 100644 index 0000000000000000000000000000000000000000..41db5306b938505786bdfc94067fec767482b911 --- /dev/null +++ b/images/Shaft_02383.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4de4fb7f115e25a71217db343bba297f37b5efd2a1fa1b7a7e6fa4fe607c6dcd +size 97334 diff --git a/images/Shaft_02384.png b/images/Shaft_02384.png new file mode 100644 index 0000000000000000000000000000000000000000..5a96baf9e5c424a88658cce590342c5cd05f5b22 --- /dev/null +++ b/images/Shaft_02384.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59eb5bfbcaddb46daf6d4d880cde4623e2649c02f9755e845d4bd8c8f995d008 +size 88437 diff --git a/images/Shaft_02385.png b/images/Shaft_02385.png new file mode 100644 index 0000000000000000000000000000000000000000..767fe4c89bb191f16be0eb51452a019e7362583d --- /dev/null +++ b/images/Shaft_02385.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba7e896841cd7c6a351c60b1921fbe953e712e64053dd3e71f642b11fbf29a9f +size 87461 diff --git a/images/Shaft_02386.png b/images/Shaft_02386.png new file mode 100644 index 0000000000000000000000000000000000000000..4c87e9b7d417e11ecdf40bad95564c32ef4bd5c1 --- /dev/null +++ b/images/Shaft_02386.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e8404e1831bf312578816f54049d3310549197c56b6a1d2ddd812c73dc3cb35 +size 88376 diff --git a/images/Shaft_02387.png b/images/Shaft_02387.png new file mode 100644 index 0000000000000000000000000000000000000000..f37fcd4510c54c20afa5ee8886020a0c9de35436 --- /dev/null +++ b/images/Shaft_02387.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9edccb75e4e6f7b3d7eb597ebac5d74461e99072f9d2d8c90ccf25a9bfa85a8b +size 70061 diff --git a/images/Shaft_02388.png b/images/Shaft_02388.png new file mode 100644 index 0000000000000000000000000000000000000000..e2a8c7c91911d01623ef1baf3c4a1e45e986f640 --- /dev/null +++ b/images/Shaft_02388.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba4610b99e9471f063b65b2583db32f47248295a8fb4160e8c80999a2c4a02af +size 88758 diff --git a/images/Shaft_02389.png b/images/Shaft_02389.png new file mode 100644 index 0000000000000000000000000000000000000000..1b25d90e82f247318607b4cb0d113fa81543a317 --- /dev/null +++ b/images/Shaft_02389.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9024cec6a35751678cf2318af49da0b44d4238d405928b1fd630180741711e9f +size 89342 diff --git a/images/Shaft_02390.png b/images/Shaft_02390.png new file mode 100644 index 0000000000000000000000000000000000000000..512306264a344211cd268f785a3deb4dba4edfff --- /dev/null +++ b/images/Shaft_02390.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cfe95ab038fee8438328cb2b254ba026580376b8d6a765282ccec78bf536eb4 +size 76166 diff --git a/images/Shaft_02391.png b/images/Shaft_02391.png new file mode 100644 index 0000000000000000000000000000000000000000..8c2bd2e5ae905689af5ac62df22cf273fa0fb2d7 --- /dev/null +++ b/images/Shaft_02391.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af4e80146a5145ae5de9efb27275032323b10ee5c2fea1bb7170ac53f3f1dc50 +size 96154 diff --git a/images/Shaft_02392.png b/images/Shaft_02392.png new file mode 100644 index 0000000000000000000000000000000000000000..7c8d7140a3408293cbbc1cb9d2edcbf9701c75fb --- /dev/null +++ b/images/Shaft_02392.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aaf47495de4bb8f953df28d0a6db94bea11905156638fc5443078fe70ea0701a +size 96576 diff --git a/images/Shaft_02393.png b/images/Shaft_02393.png new file mode 100644 index 0000000000000000000000000000000000000000..b0b813d12da9a088ea3f17c4c76393e8cac6ff25 --- /dev/null +++ b/images/Shaft_02393.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd32b9b0606a8d84a9e9700c4eea90be8bd13df78c6b5c234504165fa6c6c4bc +size 74595 diff --git a/images/Shaft_02394.png b/images/Shaft_02394.png new file mode 100644 index 0000000000000000000000000000000000000000..48af358bcb67a7d636d2a538a8691b3738eb37d9 --- /dev/null +++ b/images/Shaft_02394.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c1c146e510512197749ea5601eb7540c17af8c36661bdf5f3bb0a08e87f0cf3 +size 85437 diff --git a/images/Shaft_02395.png b/images/Shaft_02395.png new file mode 100644 index 0000000000000000000000000000000000000000..b2aee6b2f4fe6a4480710bce04e1823cbfc37626 --- /dev/null +++ b/images/Shaft_02395.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5bfcb7c89cff9ab77df7204d54add164e56f86d762e0b46c0f80fee8de107139 +size 83662 diff --git a/images/Shaft_02396.png b/images/Shaft_02396.png new file mode 100644 index 0000000000000000000000000000000000000000..cd505b988daab4a214d8902319686a6af35c7596 --- /dev/null +++ b/images/Shaft_02396.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53be5dc2f41fdb25510f392ab4ded310133e92c3f01cf1ba3ce1a8c114bc8581 +size 86883 diff --git a/images/Shaft_02397.png b/images/Shaft_02397.png new file mode 100644 index 0000000000000000000000000000000000000000..57fa6949125933bde475ce6bba2f854db11ecb5a --- /dev/null +++ b/images/Shaft_02397.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3221e582292e21c4cf18048742ed7f6c40b30d23f25ebe491b5d0bf794670cc8 +size 93674 diff --git a/images/Shaft_02398.png b/images/Shaft_02398.png new file mode 100644 index 0000000000000000000000000000000000000000..26b1aaf65cef4680df9c86fe076016c63c2605b8 --- /dev/null +++ b/images/Shaft_02398.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ceda17695040228b9e2a439629c0175b096cfe7c891b500a3597816cfe3734e +size 71537 diff --git a/images/Shaft_02399.png b/images/Shaft_02399.png new file mode 100644 index 0000000000000000000000000000000000000000..c4fb26e8b9769012ea0e071417612e18899f4cd8 --- /dev/null +++ b/images/Shaft_02399.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7e43fc7bbf0a16e47ad3712cbc03d5252cf42baa25ea5e176a1850533686d29 +size 111674 diff --git a/images/Shaft_02400.png b/images/Shaft_02400.png new file mode 100644 index 0000000000000000000000000000000000000000..d4c99f62d4475bcc08334c8249ce8e3dc4e44e96 --- /dev/null +++ b/images/Shaft_02400.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64ee71bd931cde6f0a599d2043cb97761224a6084e0071213d8572b454809c31 +size 104847 diff --git a/images/Shaft_02401.png b/images/Shaft_02401.png new file mode 100644 index 0000000000000000000000000000000000000000..b76c3f524b4b2af31ef3a65e11ea7c0eb904806c --- /dev/null +++ b/images/Shaft_02401.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:518b19c18e3e2de348d1a04496ae6ed4122b848067a613f3a95039bd6161b0c9 +size 80994 diff --git a/images/Shaft_02402.png b/images/Shaft_02402.png new file mode 100644 index 0000000000000000000000000000000000000000..89b97cc4cde56bc2377f25e088e0ebbd5aa635a2 --- /dev/null +++ b/images/Shaft_02402.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:919d432f46d5da1e4ed156e4ed09acfc569f7f79658d8d7d8b9d023a347dcf3d +size 79870 diff --git a/images/Shaft_02403.png b/images/Shaft_02403.png new file mode 100644 index 0000000000000000000000000000000000000000..5606a998e5e361b373bb701dbd413734495e086a --- /dev/null +++ b/images/Shaft_02403.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12ae62182d73b13b71f8c0493ac1190c4e2a231c713709a1c83d7f17a1f417eb +size 113104 diff --git a/images/Shaft_02404.png b/images/Shaft_02404.png new file mode 100644 index 0000000000000000000000000000000000000000..6a7ec6b5df9bc49ced1b759ba9be082ba1d4dbc2 --- /dev/null +++ b/images/Shaft_02404.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18a8ae00707653ab48a89ae4b81e8af4ce5fbfcd016f03414ca9f3e8ee9e7f81 +size 79032 diff --git a/images/Shaft_02405.png b/images/Shaft_02405.png new file mode 100644 index 0000000000000000000000000000000000000000..a8649632f668f041aec35833dba3c9fb041fa52e --- /dev/null +++ b/images/Shaft_02405.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f722150931086dae539531ed7c5f00e86524ea06b5c9fc06faeaf12a3bd2d21c +size 86749 diff --git a/images/Shaft_02406.png b/images/Shaft_02406.png new file mode 100644 index 0000000000000000000000000000000000000000..afd39baf3de0db31169eb8ca04ac16869588d665 --- /dev/null +++ b/images/Shaft_02406.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:704a64ba47f1bdd535a75b8af0d3e9c84bc24774b214e6b76b65ace03d057ef3 +size 82601 diff --git a/images/Shaft_02407.png b/images/Shaft_02407.png new file mode 100644 index 0000000000000000000000000000000000000000..966534c26e0aa8aeb95995c1559e53c36e209193 --- /dev/null +++ b/images/Shaft_02407.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:766b569c83798cae68a61489dd6ce876e207597d71f428dc5dd685438e2aab5e +size 93821 diff --git a/images/Shaft_02408.png b/images/Shaft_02408.png new file mode 100644 index 0000000000000000000000000000000000000000..203d09d9aa60448bc6b617f1dfcb3912c1316d46 --- /dev/null +++ b/images/Shaft_02408.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf7be7e83ae4e6719a043802acc26012297891d6765e2ba47b271812985b73d2 +size 68658 diff --git a/images/Shaft_02409.png b/images/Shaft_02409.png new file mode 100644 index 0000000000000000000000000000000000000000..e490c4ed42daf0c76bbdaac6faf82efa9ed1b763 --- /dev/null +++ b/images/Shaft_02409.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea5e8dd33093e206270b234598fb48e4ce4af5b7f0c581dcca5b5b4810d5cb86 +size 81726 diff --git a/images/Shaft_02410.png b/images/Shaft_02410.png new file mode 100644 index 0000000000000000000000000000000000000000..dca902f7b0bdb11534ca1e04811002fc0f3d2f3e --- /dev/null +++ b/images/Shaft_02410.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8e7b797bf29b69273fe08a8da7b04dfb724716829b8cf40e944ac999ea40017 +size 90464 diff --git a/images/Shaft_02411.png b/images/Shaft_02411.png new file mode 100644 index 0000000000000000000000000000000000000000..16ee64b234a5c30722f515cb63711adbad26e7eb --- /dev/null +++ b/images/Shaft_02411.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cd043587618664c9617fd750404f496e1f113cf92998404b932344fd2799060 +size 88175 diff --git a/images/Shaft_02412.png b/images/Shaft_02412.png new file mode 100644 index 0000000000000000000000000000000000000000..6410b8c062e02c1facaf2c51de435596942ad802 --- /dev/null +++ b/images/Shaft_02412.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b92254fd764ac36b69e4ebf56ca93e5c2afc464e5baa87cbf21e9b31ec58f727 +size 101302 diff --git a/images/Shaft_02413.png b/images/Shaft_02413.png new file mode 100644 index 0000000000000000000000000000000000000000..0604d30920cc21601591b299cc4ce0d6f959532f --- /dev/null +++ b/images/Shaft_02413.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:388f126db0af972a5cf51c5c7937bedced9b468cc58ae78ac2516da40029dab0 +size 68888 diff --git a/images/Shaft_02414.png b/images/Shaft_02414.png new file mode 100644 index 0000000000000000000000000000000000000000..d915173c7efe83a7f8cc7cd3f4dacde4f9c65d48 --- /dev/null +++ b/images/Shaft_02414.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31d392396d4a5ac799709fd34a271a47d52425bd444e38b833e820c6d4ef7d80 +size 104288 diff --git a/images/Shaft_02415.png b/images/Shaft_02415.png new file mode 100644 index 0000000000000000000000000000000000000000..fc22fc452f2c2245c3006d894fa2f05d19cc60ff --- /dev/null +++ b/images/Shaft_02415.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c1490fdf473a613de708deffd8529e38d0dc9ce6f931cf56f1bc8da2a291719 +size 104451 diff --git a/images/Shaft_02416.png b/images/Shaft_02416.png new file mode 100644 index 0000000000000000000000000000000000000000..9879ebcad4b34c46fb007a4c302dc3f3e13f9517 --- /dev/null +++ b/images/Shaft_02416.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4aa0a523b440b71eb85c9591360ae18aa22802b2393ddab2320b644c5f245c84 +size 70552 diff --git a/images/Shaft_02417.png b/images/Shaft_02417.png new file mode 100644 index 0000000000000000000000000000000000000000..8fa0d9a7aeb3486a8c160be271c1ebfadf79baae --- /dev/null +++ b/images/Shaft_02417.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1646d5dff0adc9ae7c8f14a8275a7e885a876d90956efd7977365939dd42c1bc +size 77045 diff --git a/images/Shaft_02418.png b/images/Shaft_02418.png new file mode 100644 index 0000000000000000000000000000000000000000..8e32c225c1d22090710eba605a7c6d2ac51b5d23 --- /dev/null +++ b/images/Shaft_02418.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:649d851a2a826c97fedd3c4bf5c676bc4c8028e7f921a1ac370e752e756ce7f3 +size 91555 diff --git a/images/Shaft_02419.png b/images/Shaft_02419.png new file mode 100644 index 0000000000000000000000000000000000000000..0ad6ec21324f52689a8b5f5d47a06ea09854fb60 --- /dev/null +++ b/images/Shaft_02419.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d3a458a880204d8d7c6163217e282dfd99a064d1d58cf4c6253651f854fce01 +size 83435 diff --git a/images/Shaft_02420.png b/images/Shaft_02420.png new file mode 100644 index 0000000000000000000000000000000000000000..35a54b1eecb703d1798856e141ef75b3342f0591 --- /dev/null +++ b/images/Shaft_02420.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ba3eef9268e1eaacaa3c2bb799fecc0d5497df23cf605bb1e11f16f10899fee +size 109897 diff --git a/images/Shaft_02421.png b/images/Shaft_02421.png new file mode 100644 index 0000000000000000000000000000000000000000..d4ca881ba9e98b37e5fbcfb92f2f6829ba02eea8 --- /dev/null +++ b/images/Shaft_02421.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:039e190f61d11dc08b4331b67d3ee5cae893987a0a923f07786b9a9e9111e8f6 +size 71741 diff --git a/images/Shaft_02422.png b/images/Shaft_02422.png new file mode 100644 index 0000000000000000000000000000000000000000..2f948997e5ccb8743f40e37b03c3ef41b54154aa --- /dev/null +++ b/images/Shaft_02422.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cef240fa2f8bba8e6344b712910d6fb67a4be6ddf1f66649f23b5599c670daa +size 101541 diff --git a/images/Shaft_02423.png b/images/Shaft_02423.png new file mode 100644 index 0000000000000000000000000000000000000000..f4d4e51c320e228e34fdf0756e5033049cb5cf32 --- /dev/null +++ b/images/Shaft_02423.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b96cad81c91f83ee02a19f3dbf8e17df4c39b5f1bd595dc269d6a3e557cac32 +size 89727 diff --git a/images/Shaft_02424.png b/images/Shaft_02424.png new file mode 100644 index 0000000000000000000000000000000000000000..d57892dbd03d44f0fbb6e9d3d786a88979439d37 --- /dev/null +++ b/images/Shaft_02424.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e639fe53eae3073ed673a7b79db33d4690ee2c48d5ddc588953706554ed3348 +size 68433 diff --git a/images/Shaft_02425.png b/images/Shaft_02425.png new file mode 100644 index 0000000000000000000000000000000000000000..d2d2bfcbb76d5d236a0313d62c9f84bfa4885fd3 --- /dev/null +++ b/images/Shaft_02425.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d046ee94c5ea66f7ed830b96df8f6d967367a774ed58a7d869bc8108764e6df +size 91127 diff --git a/images/Shaft_02426.png b/images/Shaft_02426.png new file mode 100644 index 0000000000000000000000000000000000000000..202c51ff8ad14fd4917625e36dc430e2c209d467 --- /dev/null +++ b/images/Shaft_02426.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d9e024e185cca010a65418c36016e1c6526bb4cc6ccfc7864757e25c9bf4a98 +size 80720 diff --git a/images/Shaft_02427.png b/images/Shaft_02427.png new file mode 100644 index 0000000000000000000000000000000000000000..11e799ed300c9cb22527b1d8912a31226d4dcd6e --- /dev/null +++ b/images/Shaft_02427.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6dd67f49aa0bbba9ec6b7bbf375b3034238832c84b18a7588014eaef4dfaeb4 +size 106418 diff --git a/images/Shaft_02428.png b/images/Shaft_02428.png new file mode 100644 index 0000000000000000000000000000000000000000..754b269aba2615821bc89b731d01c9aa04dbfc75 --- /dev/null +++ b/images/Shaft_02428.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:779ab1fa8cbec60ceba48ecfbf906c534bc6f8602bafaad927ce408f5ee67d85 +size 75324 diff --git a/images/Shaft_02429.png b/images/Shaft_02429.png new file mode 100644 index 0000000000000000000000000000000000000000..9ed57e14c4b9599bcdeaad54cd4a9a0be580a91d --- /dev/null +++ b/images/Shaft_02429.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d668330c83a92e59197d0c9c186f4cc3209baaf861ddf5f7840703de9f139b8 +size 62238 diff --git a/images/Shaft_02430.png b/images/Shaft_02430.png new file mode 100644 index 0000000000000000000000000000000000000000..17a5cef4c0dddd3c220f469b29499aa6f4f1d608 --- /dev/null +++ b/images/Shaft_02430.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:802df58e94e3e871e62f48a6b9195e286f51d3b6f42bc649b8903d20c872f912 +size 98399 diff --git a/images/Shaft_02431.png b/images/Shaft_02431.png new file mode 100644 index 0000000000000000000000000000000000000000..1f603e86a307f68dfc993527985b839c95404b52 --- /dev/null +++ b/images/Shaft_02431.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c15540355e1726b4f5a7ff362fef438784b8636a1839672fb0eea6c2c2168bd4 +size 95942 diff --git a/images/Shaft_02432.png b/images/Shaft_02432.png new file mode 100644 index 0000000000000000000000000000000000000000..2c88aa3daae2701037bbfe0c8a3c7026c4b25e48 --- /dev/null +++ b/images/Shaft_02432.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a559b60fdaab26e07c690a75a2a07a9ad12c70cca91efbd68abb84c9e5e0dd7 +size 91930 diff --git a/images/Shaft_02433.png b/images/Shaft_02433.png new file mode 100644 index 0000000000000000000000000000000000000000..ad0001b3430dee936fc45320b4ced9cae5cd4a4f --- /dev/null +++ b/images/Shaft_02433.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fe123e590122030ba6250c176a4b96beef41c9408fb68a9ca3424a01796bf2e +size 70881 diff --git a/images/Shaft_02434.png b/images/Shaft_02434.png new file mode 100644 index 0000000000000000000000000000000000000000..866ba8f44336a918516dee276eddb4cb9de7078a --- /dev/null +++ b/images/Shaft_02434.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfee398fbc7fcaa532b313d0db8c2bd7d9f8f0a1731527e0a2f5475e8f0bcf34 +size 113828 diff --git a/images/Shaft_02435.png b/images/Shaft_02435.png new file mode 100644 index 0000000000000000000000000000000000000000..95d95d6acf59ea6f356038be0be92ada3458fa32 --- /dev/null +++ b/images/Shaft_02435.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f85ee00da80d9cc8cea8152b0b01f2260cfe77ed43be502ed64406409c01c253 +size 107325 diff --git a/images/Shaft_02436.png b/images/Shaft_02436.png new file mode 100644 index 0000000000000000000000000000000000000000..3bc73c74c17f98f245412a018dd557c7f1b78e87 --- /dev/null +++ b/images/Shaft_02436.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:441e20d2b81a864f451b3932879709b0a6bd912ea6fa801c145b29f719020603 +size 78315 diff --git a/images/Shaft_02437.png b/images/Shaft_02437.png new file mode 100644 index 0000000000000000000000000000000000000000..9d621eeb56ddc6eb8704de70e81e482241ad5273 --- /dev/null +++ b/images/Shaft_02437.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8005ce48f43047ccdc37a45de7df0e3aa5554bd24dcae2d602a112f753f1c87e +size 70243 diff --git a/images/Shaft_02438.png b/images/Shaft_02438.png new file mode 100644 index 0000000000000000000000000000000000000000..a615e23763038daf7788e95189e2156e5173d69e --- /dev/null +++ b/images/Shaft_02438.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fbac0b49c8785d15b37b3e8e3a6272c2bda29cb2ddcfbb921c993eb1ffd36d0 +size 70123 diff --git a/images/Shaft_02439.png b/images/Shaft_02439.png new file mode 100644 index 0000000000000000000000000000000000000000..81de4d15d9e21cb36468b3a59b6b33bb21b48618 --- /dev/null +++ b/images/Shaft_02439.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b38f823ea22fbb53bd13d21860b20292d83879d3cfadd1748830d9019eb73074 +size 91314 diff --git a/images/Shaft_02440.png b/images/Shaft_02440.png new file mode 100644 index 0000000000000000000000000000000000000000..e8c93d4a22e7d757a5f6ba2b6c4d19672bbfdf7a --- /dev/null +++ b/images/Shaft_02440.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d23216ce0a035a7ace80243b614c8532f0586a5797a683a748ce883f1a51cb9f +size 92270 diff --git a/images/Shaft_02441.png b/images/Shaft_02441.png new file mode 100644 index 0000000000000000000000000000000000000000..4a28b85c15f3e1de22711600635469d3c8316614 --- /dev/null +++ b/images/Shaft_02441.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8086d8d4fadf1212552bf3db491272ceceb3ef3695871845302552893afafc5c +size 100621 diff --git a/images/Shaft_02442.png b/images/Shaft_02442.png new file mode 100644 index 0000000000000000000000000000000000000000..525ab06e6e6ca9614a2f7b6941f0c117dae87e46 --- /dev/null +++ b/images/Shaft_02442.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:395612913cd66c955e40d613ce611fe61af88089fc713fcef62550cb42c54d3a +size 78631 diff --git a/images/Shaft_02443.png b/images/Shaft_02443.png new file mode 100644 index 0000000000000000000000000000000000000000..398df3af3d87457a872f551c21256092527ff791 --- /dev/null +++ b/images/Shaft_02443.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99e04b2e73db5a8c6d77eb7fa2613671a4d510c3afcd80f29f0e8261bab84292 +size 70336 diff --git a/images/Shaft_02444.png b/images/Shaft_02444.png new file mode 100644 index 0000000000000000000000000000000000000000..8ce6cb1e17f5c475638dc2110606d265b8f62a4e --- /dev/null +++ b/images/Shaft_02444.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddc72ebe3fbcaf38d4a02aa51cf45f0f94ead3294395ea3d584a9e1dda5a8d93 +size 87280 diff --git a/images/Shaft_02445.png b/images/Shaft_02445.png new file mode 100644 index 0000000000000000000000000000000000000000..d2d6a34b81ea25fce30184084bda5b063eff1cdf --- /dev/null +++ b/images/Shaft_02445.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1ba66f6877e45c23526477f8cb1daa67714804a9258e9c50797b0f3608d9285 +size 91363 diff --git a/images/Shaft_02446.png b/images/Shaft_02446.png new file mode 100644 index 0000000000000000000000000000000000000000..549c3156cbd8ba9c998726befb0d6ae6490d1e51 --- /dev/null +++ b/images/Shaft_02446.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c8461f59bcd43dc3386c353fd79aa85fab1131ba04cbf0d2fc3893651c94725 +size 78365 diff --git a/images/Shaft_02447.png b/images/Shaft_02447.png new file mode 100644 index 0000000000000000000000000000000000000000..1de5ea716f0a681388fbfc4902259bae31ea8027 --- /dev/null +++ b/images/Shaft_02447.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5f314169bb99ab7086ee19b2c8c865b933a5def9623725d882815dd1e185deb +size 82781 diff --git a/images/Shaft_02448.png b/images/Shaft_02448.png new file mode 100644 index 0000000000000000000000000000000000000000..3a91b445169a01f5ad4e7aa3df5c3cee44bb2bea --- /dev/null +++ b/images/Shaft_02448.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a5f16b925f4d2f3f78b2da929b5499bb15bb5a125471bdc273000195caec719 +size 83339 diff --git a/images/Shaft_02449.png b/images/Shaft_02449.png new file mode 100644 index 0000000000000000000000000000000000000000..c4cb0d85330fa28403df04fdea6535f9321b0574 --- /dev/null +++ b/images/Shaft_02449.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:badb43f995668bcf8abf001f90fcee60be0be44d4ef436c6748869fec262da0d +size 95622 diff --git a/images/Shaft_02450.png b/images/Shaft_02450.png new file mode 100644 index 0000000000000000000000000000000000000000..5ca52e161938f9545b2deb43656a0faf87b4fb92 --- /dev/null +++ b/images/Shaft_02450.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a452cce7aada05d022a8cf15fcb217ab3192fdf515b5df128c25f79128dc5576 +size 84419 diff --git a/images/Shaft_02451.png b/images/Shaft_02451.png new file mode 100644 index 0000000000000000000000000000000000000000..741b2d2bf4df59005374c944d656c7437ba6f5cf --- /dev/null +++ b/images/Shaft_02451.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb029e493d3bff5f633eab55ec758280df42e837c49a85c2d28bf73ed1cc43e9 +size 81642 diff --git a/images/Shaft_02452.png b/images/Shaft_02452.png new file mode 100644 index 0000000000000000000000000000000000000000..064018d4375a3fc97f3c14e7a4a33cb138f901d5 --- /dev/null +++ b/images/Shaft_02452.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3819947e2459a806c237de34ddc5183efe7f63ec48f3b068cfd3cc8985ffa9dd +size 87187 diff --git a/images/Shaft_02453.png b/images/Shaft_02453.png new file mode 100644 index 0000000000000000000000000000000000000000..6ecd84f47140a388bf8f42df6945f8adada1f6b8 --- /dev/null +++ b/images/Shaft_02453.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03271ea7132cc39ac972147bac4a905c8f1a02614f2fdeedc3799e781d22b05a +size 79934 diff --git a/images/Shaft_02454.png b/images/Shaft_02454.png new file mode 100644 index 0000000000000000000000000000000000000000..ded4f58a5d7edc48338894303f235c3f60175017 --- /dev/null +++ b/images/Shaft_02454.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7eab98f6ba8d5a1a69d7c7be3c1911f1c4278e77645fa09b3a079c6e605be85a +size 94284 diff --git a/images/Shaft_02455.png b/images/Shaft_02455.png new file mode 100644 index 0000000000000000000000000000000000000000..6cfa30a02600532b3b972339a405f1a52e281325 --- /dev/null +++ b/images/Shaft_02455.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ec81c8b72d834018f683ea5107ffa0f5c7f193f79a18fcdd9c14fb276c7e7a7 +size 100378 diff --git a/images/Shaft_02456.png b/images/Shaft_02456.png new file mode 100644 index 0000000000000000000000000000000000000000..7da68504232b53135031073e32cb1d98dab9bb05 --- /dev/null +++ b/images/Shaft_02456.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e89f8fe32cb4a58535733f17a1b1f47e4d74e35686b26a6828bc78718a0ca6cc +size 92069 diff --git a/images/Shaft_02457.png b/images/Shaft_02457.png new file mode 100644 index 0000000000000000000000000000000000000000..e5800451212417fd4f79e410973e4222307e6b88 --- /dev/null +++ b/images/Shaft_02457.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a4aa3c6a6527d243bc3b7131b7400c33656654c7470e3ea52409073f2dbe840 +size 91689 diff --git a/images/Shaft_02458.png b/images/Shaft_02458.png new file mode 100644 index 0000000000000000000000000000000000000000..388ff78145106d76e9eae8b8f8e9a7fd9938790e --- /dev/null +++ b/images/Shaft_02458.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e82ba7a713f18d4c09484b202251109414353cfb011101b068a61d48997e9ad +size 115908 diff --git a/images/Shaft_02459.png b/images/Shaft_02459.png new file mode 100644 index 0000000000000000000000000000000000000000..eb3ab187ada6c219a2ab8ea9272c9494bbd038c1 --- /dev/null +++ b/images/Shaft_02459.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb57fada9d84ad0cc98e2da55dea10388c2f9d12ccb8934174b7fd7aa9e0fae5 +size 114563 diff --git a/images/Shaft_02460.png b/images/Shaft_02460.png new file mode 100644 index 0000000000000000000000000000000000000000..7f399c85de64125be8f33d4dcefe54c36d5c54f4 --- /dev/null +++ b/images/Shaft_02460.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:104a5b91278723dac660439db23a931f1dabd1c1500530df2830c57911550da0 +size 81905 diff --git a/images/Shaft_02461.png b/images/Shaft_02461.png new file mode 100644 index 0000000000000000000000000000000000000000..dc20ccb0c9b1d5f66d9690bc6bd71332713f99a8 --- /dev/null +++ b/images/Shaft_02461.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17c31474dc70df10e3c9824e5a5a905a2f6cfc410a8bf9adabb4b86b9afbd4ac +size 72554 diff --git a/images/Shaft_02462.png b/images/Shaft_02462.png new file mode 100644 index 0000000000000000000000000000000000000000..054dbfdb56c485fd49ef2404e4ac3295144777c4 --- /dev/null +++ b/images/Shaft_02462.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f4b36060bd14114c201da429bb8b7250152ea979cc32aaf6d1bf5fd2abe03cf +size 86930 diff --git a/images/Shaft_02463.png b/images/Shaft_02463.png new file mode 100644 index 0000000000000000000000000000000000000000..0c9b61129803924ae2ea6bafd6912cecd3c53b0e --- /dev/null +++ b/images/Shaft_02463.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7a7d0ae2d3b3f71782dbfddb2a20b3e4c0a746cb9cb4fac8e34006106f1c7a1 +size 73007 diff --git a/images/Shaft_02464.png b/images/Shaft_02464.png new file mode 100644 index 0000000000000000000000000000000000000000..e3ffa570a53161b8d9b74fe0bca43e0d444d008e --- /dev/null +++ b/images/Shaft_02464.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08aa71acbb67378e620659179f3a6842af0441f014ac010b90fb8465431b92ca +size 92514 diff --git a/images/Shaft_02465.png b/images/Shaft_02465.png new file mode 100644 index 0000000000000000000000000000000000000000..38c3f823fee10d7bb39d2ab2ccf2310f0012e5ce --- /dev/null +++ b/images/Shaft_02465.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8de11d05f5675f88b598eae07ce7cd91df0dcbd5940ec5dd4230d4d639f39f24 +size 98536 diff --git a/images/Shaft_02466.png b/images/Shaft_02466.png new file mode 100644 index 0000000000000000000000000000000000000000..be9288f4ac26c8e0aa3b02c8e4e2b95a15fe9795 --- /dev/null +++ b/images/Shaft_02466.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb09ef26bd9c9b2a3f01d2430faadfb61fc3d0b078c397fc7f1f76a98ad035d2 +size 105158 diff --git a/images/Shaft_02467.png b/images/Shaft_02467.png new file mode 100644 index 0000000000000000000000000000000000000000..138bf196e497d1c20b4125e12460bb90754c5495 --- /dev/null +++ b/images/Shaft_02467.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d2106ebe9c63a595c75056d2616a11d230dc585e72f5ddd06315e93f4dea9c8 +size 74204 diff --git a/images/Shaft_02468.png b/images/Shaft_02468.png new file mode 100644 index 0000000000000000000000000000000000000000..45fe90b52844284320f38d599bbddfca33dc3d40 --- /dev/null +++ b/images/Shaft_02468.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3282a3ba52a6d7d8397aece34484be14f653ae2e54817467fc9e78bdb1ea51b7 +size 79021 diff --git a/images/Shaft_02469.png b/images/Shaft_02469.png new file mode 100644 index 0000000000000000000000000000000000000000..ffdc7403afa57422e77e89e65256a85004f82e49 --- /dev/null +++ b/images/Shaft_02469.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7427835e5b458c6c4b0904f475854c9be5a5523df4a26cbcbed095b94baa5108 +size 98018 diff --git a/images/Shaft_02470.png b/images/Shaft_02470.png new file mode 100644 index 0000000000000000000000000000000000000000..579778fa50adc002297d1859c7516445d3bba900 --- /dev/null +++ b/images/Shaft_02470.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c2a873f8aa5a8bcc275185f9ef9c8cd538ee9808643873aba08c859fbf49da1 +size 71692 diff --git a/images/Shaft_02471.png b/images/Shaft_02471.png new file mode 100644 index 0000000000000000000000000000000000000000..37869b289913dbd2712d82affc0d416775b7b005 --- /dev/null +++ b/images/Shaft_02471.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb545e9ad03b3838545210c2b3833de2bf1d4943ca52561be870a92e97ce053c +size 97412 diff --git a/images/Shaft_02472.png b/images/Shaft_02472.png new file mode 100644 index 0000000000000000000000000000000000000000..04282221216bcf40a41f5e0c7de38d400bca6f18 --- /dev/null +++ b/images/Shaft_02472.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3738eaf371f479d4cc95c57aa9a17f9b22692b3e0c2f1d01c464adab2f467a5b +size 80053 diff --git a/images/Shaft_02473.png b/images/Shaft_02473.png new file mode 100644 index 0000000000000000000000000000000000000000..58c9193d4e2427bc092471bfcb63e118867c036a --- /dev/null +++ b/images/Shaft_02473.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95d825b0aa71385e22af7a98a99007f9357eb439b403635be19c447700014943 +size 96437 diff --git a/images/Shaft_02474.png b/images/Shaft_02474.png new file mode 100644 index 0000000000000000000000000000000000000000..7fb342eb36ce2fd41a3ff51b01befd8ccdf4d038 --- /dev/null +++ b/images/Shaft_02474.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65d18ff9e108d22b9c4a95e5f6b2282657a28fb6a0ebb77facf4daf46bcd434a +size 77360 diff --git a/images/Shaft_02475.png b/images/Shaft_02475.png new file mode 100644 index 0000000000000000000000000000000000000000..40d571e48ef4814f669e83793de7eadfa7e63184 --- /dev/null +++ b/images/Shaft_02475.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6bc31753c7bafb9c1010d298aed930c68bc6aed3079eff86bc3487de64f9eef +size 73499 diff --git a/images/Shaft_02476.png b/images/Shaft_02476.png new file mode 100644 index 0000000000000000000000000000000000000000..a6a4a9151da5b941170c8053947f61fdcc5afdf3 --- /dev/null +++ b/images/Shaft_02476.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70036b476ca2e2042519f173c37b6f61cc46e454a0e8ef609c36de31cebd1c79 +size 88472 diff --git a/images/Shaft_02477.png b/images/Shaft_02477.png new file mode 100644 index 0000000000000000000000000000000000000000..4d4d224ddb1d78f9e2b6aff2e6bb84cf601e3cc0 --- /dev/null +++ b/images/Shaft_02477.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9795aa31febf0823356570f02b22eb957a0b15c23c42fd53614311cdf853ded7 +size 74012 diff --git a/images/Shaft_02478.png b/images/Shaft_02478.png new file mode 100644 index 0000000000000000000000000000000000000000..ebcf30c45603ed7da8a9cf24e1be1d1d9ba95455 --- /dev/null +++ b/images/Shaft_02478.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca0890650bd5a85c9bb9eea8d982ead1dcdad1201d6258b65abb81f4c7de8348 +size 89974 diff --git a/images/Shaft_02479.png b/images/Shaft_02479.png new file mode 100644 index 0000000000000000000000000000000000000000..65866d96ce12c5119596334953116262296905de --- /dev/null +++ b/images/Shaft_02479.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9897db015f08365bb3c64b93d7a4a0bdb4165f7d139201182c6e243baf5cf28 +size 71846 diff --git a/images/Shaft_02480.png b/images/Shaft_02480.png new file mode 100644 index 0000000000000000000000000000000000000000..5078428c76d895e30615dd132a5eaa6cd22abac1 --- /dev/null +++ b/images/Shaft_02480.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:587485d7da7d0ce2744ab466663ae158d841628430c768cdc20bcebf4583cad0 +size 89642 diff --git a/images/Shaft_02481.png b/images/Shaft_02481.png new file mode 100644 index 0000000000000000000000000000000000000000..08837f297e240b1d6fc49d3d66ca679bd072fde9 --- /dev/null +++ b/images/Shaft_02481.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b79169a0f3335f14c5f819e8a9b0c8811f82ccf4c3a7de15574dc617983a022f +size 70239 diff --git a/images/Shaft_02482.png b/images/Shaft_02482.png new file mode 100644 index 0000000000000000000000000000000000000000..948c19958e3bc0b09b05d46bbdc49e650cc21434 --- /dev/null +++ b/images/Shaft_02482.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0781eba994132117f70a6f5227b88187b395b8e0fb9350c9c55897fcae0a7cb +size 77192 diff --git a/images/Shaft_02483.png b/images/Shaft_02483.png new file mode 100644 index 0000000000000000000000000000000000000000..ed5fe52f4f0e648228e1dfb65cd4f1fb0c2ea95e --- /dev/null +++ b/images/Shaft_02483.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbb8e2b62f141944557f5e37310db86a6eb8702f85d6114cbdef35fcadda5f01 +size 86199 diff --git a/images/Shaft_02484.png b/images/Shaft_02484.png new file mode 100644 index 0000000000000000000000000000000000000000..1bc45137e8e217971caf88f85c6c1f0d1a627907 --- /dev/null +++ b/images/Shaft_02484.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da919e095f957f5253cf0a3ee5e47503154fb8bde43383e445196c87543e3b93 +size 91368 diff --git a/images/Shaft_02485.png b/images/Shaft_02485.png new file mode 100644 index 0000000000000000000000000000000000000000..04712b513cec8c83447196adcf61d66ebeeeb044 --- /dev/null +++ b/images/Shaft_02485.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:489fcaa6c923e6486e0df31f12f9165c54c97431fbc15b026b0b0e54a946e993 +size 97198 diff --git a/images/Shaft_02486.png b/images/Shaft_02486.png new file mode 100644 index 0000000000000000000000000000000000000000..33d5f857f4186f64dbb2803fe0f7a1e419655be9 --- /dev/null +++ b/images/Shaft_02486.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd0e886c2015d31837bde4d33e93957849fe8505a4ab8ddd90a013bc4bde09a7 +size 75200 diff --git a/images/Shaft_02487.png b/images/Shaft_02487.png new file mode 100644 index 0000000000000000000000000000000000000000..9a1a79859834f38a0719ba183e0086cbba656743 --- /dev/null +++ b/images/Shaft_02487.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0b9c58bf17da31b3f495cd7acef85afaf7b60e764f259415c51f248cfbd41b1 +size 75667 diff --git a/images/Shaft_02488.png b/images/Shaft_02488.png new file mode 100644 index 0000000000000000000000000000000000000000..bd9f09d50914316139415eed25abf9e130472c5e --- /dev/null +++ b/images/Shaft_02488.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edefacaf3157aba5af69534c1c7a88252c93d164c1e2f4e5486461e2c947f521 +size 80834 diff --git a/images/Shaft_02489.png b/images/Shaft_02489.png new file mode 100644 index 0000000000000000000000000000000000000000..79a222ca45b357bd0de71ca76e576e98c9cf5869 --- /dev/null +++ b/images/Shaft_02489.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e8f09fc6b30a0b3ddd94b533f371f48ec741a67c337e681d78aedb6909f69bb +size 94977 diff --git a/images/Shaft_02490.png b/images/Shaft_02490.png new file mode 100644 index 0000000000000000000000000000000000000000..3718e2f60be0cf267f595766ae0c44827849bbfb --- /dev/null +++ b/images/Shaft_02490.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ef04a3566f2c64123324237662e1be1b923c006911fae3b8aedf9e4734f1ca9 +size 95768 diff --git a/images/Shaft_02491.png b/images/Shaft_02491.png new file mode 100644 index 0000000000000000000000000000000000000000..d5a6f527e62b32bd6d76e36839b5ecb9fe46f09c --- /dev/null +++ b/images/Shaft_02491.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:beb7b7f8cbd287c71d841eaca92101a46d63a2ed3547be495db8789ab991717d +size 66191 diff --git a/images/Shaft_02492.png b/images/Shaft_02492.png new file mode 100644 index 0000000000000000000000000000000000000000..eb88303c4703a74521ffe1f0eefcb5d8c34db54e --- /dev/null +++ b/images/Shaft_02492.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb1a237ff9713bc237347f150e54301965638a23c6bf866477cfdd31d27d4f06 +size 89433 diff --git a/images/Shaft_02493.png b/images/Shaft_02493.png new file mode 100644 index 0000000000000000000000000000000000000000..4dd4a53c5d11a8fc5f75782d8d30621a76a3b6f3 --- /dev/null +++ b/images/Shaft_02493.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:129436038a6147745a59bf5a256157b111e2acf405092cbd1141e73ba86ddeac +size 84379 diff --git a/images/Shaft_02494.png b/images/Shaft_02494.png new file mode 100644 index 0000000000000000000000000000000000000000..f15f1a612c500bd28db9719af7bb70f27f07ec5d --- /dev/null +++ b/images/Shaft_02494.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b1085be8aa8b04020c6458a045923bb734e9ae4bcb5cce4acec03b7e730f8bf +size 91566 diff --git a/images/Shaft_02495.png b/images/Shaft_02495.png new file mode 100644 index 0000000000000000000000000000000000000000..f65bc3db03831c85e360174a72a1d04642388c32 --- /dev/null +++ b/images/Shaft_02495.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb8ef9c125b2b905536dbc064974f2ba10ea9c04c9eedff6d7664ae12427ced8 +size 70793 diff --git a/images/Shaft_02496.png b/images/Shaft_02496.png new file mode 100644 index 0000000000000000000000000000000000000000..8667667d2d9cd316507d37ac83ef5a4116951a4f --- /dev/null +++ b/images/Shaft_02496.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b8e38e141e2c2b9f7e9909f661ca5a1322a9bacd21a5092184e7d7693592a7b +size 81152 diff --git a/images/Shaft_02497.png b/images/Shaft_02497.png new file mode 100644 index 0000000000000000000000000000000000000000..8cb420fe6ee2901b997f3b184feaf5e0d7e1dcca --- /dev/null +++ b/images/Shaft_02497.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4882668c0c36cf5c65ba6fe8bcc569870e66cf7466829b12db30417926393fb3 +size 108176 diff --git a/images/Shaft_02498.png b/images/Shaft_02498.png new file mode 100644 index 0000000000000000000000000000000000000000..467c51d8fccc9f18c803dcf65f58726fdd6a0e78 --- /dev/null +++ b/images/Shaft_02498.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71918d4278495766c19e436bb237285fd0c06b85be845bdcc8fe7e6e85da4a2f +size 117317 diff --git a/images/Shaft_02499.png b/images/Shaft_02499.png new file mode 100644 index 0000000000000000000000000000000000000000..e87724e93acaf0a43fc16a9407f388ded399eb4e --- /dev/null +++ b/images/Shaft_02499.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6ae1abf68b43ffd24e8cd587dbf2e2c53d17430d38f8fdd9361bb7c9d531e8c +size 73385 diff --git a/images/Shaft_02500.png b/images/Shaft_02500.png new file mode 100644 index 0000000000000000000000000000000000000000..40955e54bce5b6667b6b0ffbe7e5a1fc6c0d2ef1 --- /dev/null +++ b/images/Shaft_02500.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00ed9b714c49f2e36e286db415be640895555ec5695e737cbf85659481403265 +size 82119 diff --git a/images/Shaft_02501.png b/images/Shaft_02501.png new file mode 100644 index 0000000000000000000000000000000000000000..c82bfb81bc284d5901c7b9d87b7e90cb0c434230 --- /dev/null +++ b/images/Shaft_02501.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adb0fc442c94eca3436621886da149ccdd045b4ee1d279c35889bca48f8ab308 +size 71493 diff --git a/images/Shaft_02502.png b/images/Shaft_02502.png new file mode 100644 index 0000000000000000000000000000000000000000..bc8fca138c72b96e8fc36b0e9ce66520c187bc81 --- /dev/null +++ b/images/Shaft_02502.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:844e3d41cc64fb8645e576fea55793da826f25f1520e3775a82b8a1204376d7a +size 72380 diff --git a/images/Shaft_02503.png b/images/Shaft_02503.png new file mode 100644 index 0000000000000000000000000000000000000000..a429eb84f9af8b324ab15c929830fe7d12acc5fe --- /dev/null +++ b/images/Shaft_02503.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e34c2421b117cdff243521dd7f4014c8a8274737ef51e98fafa632efb7fef853 +size 71050 diff --git a/images/Shaft_02504.png b/images/Shaft_02504.png new file mode 100644 index 0000000000000000000000000000000000000000..1b0df0eaf172d27ddf17f58030fb75923f67c778 --- /dev/null +++ b/images/Shaft_02504.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38348e25dc830fbc00b8d441d434142ac90f16adcb57226fd6c398bdd89a2aba +size 79102 diff --git a/images/Shaft_02505.png b/images/Shaft_02505.png new file mode 100644 index 0000000000000000000000000000000000000000..ee997330ce303545d93932980afbb0e9a781b321 --- /dev/null +++ b/images/Shaft_02505.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d12f9e06bf862972c10a4fb890396a319ade7c504235b95618e585047b1be33a +size 89439 diff --git a/images/Shaft_02506.png b/images/Shaft_02506.png new file mode 100644 index 0000000000000000000000000000000000000000..d182bf0c7acf2893e678c7e76f1c4ab4c638d8fe --- /dev/null +++ b/images/Shaft_02506.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55626e1102247269f6fe1f0b39e8fb4255a625cba0574ece26b5d62536407f36 +size 88557 diff --git a/images/Shaft_02507.png b/images/Shaft_02507.png new file mode 100644 index 0000000000000000000000000000000000000000..fae348cfbf4c78a52c57a2fdb00419c738d1e4bb --- /dev/null +++ b/images/Shaft_02507.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b405f95cd0c663c17f4d2f6c958cf34046ffb4a02c0b411bf6d637abc5035bb3 +size 91156 diff --git a/images/Shaft_02508.png b/images/Shaft_02508.png new file mode 100644 index 0000000000000000000000000000000000000000..3b1b3f91ffbaf020d2759e9b47ac6ab144f2e730 --- /dev/null +++ b/images/Shaft_02508.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d417554eb4c5f6c260268588122491de21621d744e5e50c9b2b0bc0957e32b3e +size 82059 diff --git a/images/Shaft_02509.png b/images/Shaft_02509.png new file mode 100644 index 0000000000000000000000000000000000000000..0931081932137ccd4a1702a6775d86a3f1631e33 --- /dev/null +++ b/images/Shaft_02509.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4772348ef6845c1851a0e3ca88595e9f2921664e26bcb40bede6b95c01f7b23b +size 110461 diff --git a/images/Shaft_02510.png b/images/Shaft_02510.png new file mode 100644 index 0000000000000000000000000000000000000000..b0a3a864c0fe560e0c8c26b91a2d4057efadbbb1 --- /dev/null +++ b/images/Shaft_02510.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbba71c8464c4ad3254d9be15cf9488a4ea96d9cbe7af8aabef2896971bad665 +size 67493 diff --git a/images/Shaft_02511.png b/images/Shaft_02511.png new file mode 100644 index 0000000000000000000000000000000000000000..7cecdbb073875b129aef44e7b41b636eccc3efe5 --- /dev/null +++ b/images/Shaft_02511.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:298a00028da23299357107db0a79e15f6c2b7c979722ba2fddb0173041631cd5 +size 75603 diff --git a/images/Shaft_02512.png b/images/Shaft_02512.png new file mode 100644 index 0000000000000000000000000000000000000000..fda1a974a896d8db4532a255c4e6be2c9a3be2e9 --- /dev/null +++ b/images/Shaft_02512.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f1fa7ee9d3ccb5ca2ea5efffb470abf5954535f30b1714cc1ccf95cef8b8f46 +size 80918 diff --git a/images/Shaft_02513.png b/images/Shaft_02513.png new file mode 100644 index 0000000000000000000000000000000000000000..95d72afc6a6644f60d0c1dd0442b977e762682e1 --- /dev/null +++ b/images/Shaft_02513.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7a9c15d6c6ce6185cefb7c8e1c0d0c0d1e99a9991afc7f5f3a303437d3721a9 +size 87467 diff --git a/images/Shaft_02514.png b/images/Shaft_02514.png new file mode 100644 index 0000000000000000000000000000000000000000..161a91133b90723a7ab2247bd125d65621ae4563 --- /dev/null +++ b/images/Shaft_02514.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57783d8990a3bc5167b7b1b3af47645c0241b114832babcbd0811fb5c388e183 +size 98741 diff --git a/images/Shaft_02515.png b/images/Shaft_02515.png new file mode 100644 index 0000000000000000000000000000000000000000..9b4fa8879a7d68c069f2c84eb2ebeb64fea32ec2 --- /dev/null +++ b/images/Shaft_02515.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:546b28d766ebe5f74e9a5b7ccae216913c10ee8a98bffa0e1060c31421d1ae87 +size 101885 diff --git a/images/Shaft_02516.png b/images/Shaft_02516.png new file mode 100644 index 0000000000000000000000000000000000000000..bc0d3a588ba3ee9e9fec70c11adb7e9a61ee4a58 --- /dev/null +++ b/images/Shaft_02516.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cd030f29a78595ef3ead81cc039b5224b132daccf220766769e2590f9d0a380 +size 100403 diff --git a/images/Shaft_02517.png b/images/Shaft_02517.png new file mode 100644 index 0000000000000000000000000000000000000000..4ca6dfa875e0748f13e235f4215dfe182a9be548 --- /dev/null +++ b/images/Shaft_02517.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0b5a9de664d1633e901a871b9443cb58d81ab26afacd1c5eb3175f9cb338b79 +size 105168 diff --git a/images/Shaft_02518.png b/images/Shaft_02518.png new file mode 100644 index 0000000000000000000000000000000000000000..e8bc3292bce45e1f5ff51388bfbc4789c51bd278 --- /dev/null +++ b/images/Shaft_02518.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb25b836c19d6872d04c3bfc0cb36399944c0dfc69a5f45dd3ae60f6dc205f20 +size 81320 diff --git a/images/Shaft_02519.png b/images/Shaft_02519.png new file mode 100644 index 0000000000000000000000000000000000000000..fb6f10e86f8f0ddb9aebc5e34d09434ecbf8a277 --- /dev/null +++ b/images/Shaft_02519.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29c876e2aca5229b63a60a13ae097b31b9194028a75a683c39e2775e1e48569d +size 71868 diff --git a/images/Shaft_02520.png b/images/Shaft_02520.png new file mode 100644 index 0000000000000000000000000000000000000000..93927c9a6ad628a892dffec3c69f90ec2da1ded2 --- /dev/null +++ b/images/Shaft_02520.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28be05cc1f6df1b092d93f447ab663fd73935e888b65be5d89e756c767e996ac +size 73466 diff --git a/images/Shaft_02521.png b/images/Shaft_02521.png new file mode 100644 index 0000000000000000000000000000000000000000..feb39521ad5040e9093326c523d7f9fe656337fa --- /dev/null +++ b/images/Shaft_02521.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30eed10e2154d26e1617430b251b2151c30b3c2f376739c3eb011ff6868a460b +size 104651 diff --git a/images/Shaft_02522.png b/images/Shaft_02522.png new file mode 100644 index 0000000000000000000000000000000000000000..3542746f50888bc13fca6c9c2cc27ca3d8cd1798 --- /dev/null +++ b/images/Shaft_02522.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca1a17cdc42c8a88607f92ac79f0a302186711e2f5d0930e085f5ea748e7569d +size 75381 diff --git a/images/Shaft_02523.png b/images/Shaft_02523.png new file mode 100644 index 0000000000000000000000000000000000000000..9f79b5d6e32dd3032bbd91accde54e25c8ce83dd --- /dev/null +++ b/images/Shaft_02523.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8431e6fd515dffa3da1fe197b28c5b96646285c920ed0dbd22a05a5cd2e1294 +size 81441 diff --git a/images/Shaft_02524.png b/images/Shaft_02524.png new file mode 100644 index 0000000000000000000000000000000000000000..6c1157c70a72228b4714b4f76e25741dcba283b8 --- /dev/null +++ b/images/Shaft_02524.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:879f99a16678112334699660f9cccdf8a1fc7fbebe8fc028cf9c6ff6e9b2e9d3 +size 71304 diff --git a/images/Shaft_02525.png b/images/Shaft_02525.png new file mode 100644 index 0000000000000000000000000000000000000000..b92b058c4c3c530ddd72d1b268ce467df5916fee --- /dev/null +++ b/images/Shaft_02525.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86b1235f0dff5178fd592b3ca47783c5a15b0afc453c4a2703ea913beac6c5ec +size 105200 diff --git a/images/Shaft_02526.png b/images/Shaft_02526.png new file mode 100644 index 0000000000000000000000000000000000000000..8979860c32fb4d652a6e5e72853984bdd07cc9f3 --- /dev/null +++ b/images/Shaft_02526.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5c79ae3ffd0e67c79b3db88bb41c94d82ad237af93765f6cc33cee2762f35da +size 70473 diff --git a/images/Shaft_02527.png b/images/Shaft_02527.png new file mode 100644 index 0000000000000000000000000000000000000000..7a2e5333b26a30c5474282536aa32a33c8ed2ee8 --- /dev/null +++ b/images/Shaft_02527.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f3e4e7803fda9d13a4a74d5c20f6a257a6216b1d4559a7a1d628c1dba52834b +size 81101 diff --git a/images/Shaft_02528.png b/images/Shaft_02528.png new file mode 100644 index 0000000000000000000000000000000000000000..60676e841c841a50cb0fe353f6e6654607bf30a3 --- /dev/null +++ b/images/Shaft_02528.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a68bc21a2900b5cf497d21d1717edcb901621a64151d8a92015972caad8ca602 +size 112860 diff --git a/images/Shaft_02529.png b/images/Shaft_02529.png new file mode 100644 index 0000000000000000000000000000000000000000..b7c86d3e9f0a8ee0c6352c778cf3002d7d82ae4a --- /dev/null +++ b/images/Shaft_02529.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82a6730263394f0a8b4563d979cbfd56f3914300c11f3ef0016baead696f9672 +size 72617 diff --git a/images/Shaft_02530.png b/images/Shaft_02530.png new file mode 100644 index 0000000000000000000000000000000000000000..453481c577b53ccdb17dcf01c5f322b166de828c --- /dev/null +++ b/images/Shaft_02530.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54ae9c09a3c7a875eec2a58a13a04600fbeb080d8b370cf03ec5b453d266faf6 +size 86823 diff --git a/images/Shaft_02531.png b/images/Shaft_02531.png new file mode 100644 index 0000000000000000000000000000000000000000..ca9f9db6d93631ee2bdb42d519ca2c564846916f --- /dev/null +++ b/images/Shaft_02531.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a96f1f572a38e4679a739865ac747928570f51a705d4237ec3865a1f025b51d4 +size 69359 diff --git a/images/Shaft_02532.png b/images/Shaft_02532.png new file mode 100644 index 0000000000000000000000000000000000000000..8175c7dcc9bd2b98fbef23277184fbf34bfe3fcb --- /dev/null +++ b/images/Shaft_02532.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79f5053ffb9cb24398e3804a6c08dac732841a38b0876e5b9fbea0ecd6e7df24 +size 73400 diff --git a/images/Shaft_02533.png b/images/Shaft_02533.png new file mode 100644 index 0000000000000000000000000000000000000000..f8f0c72cd0f64d2a559a2f08c94821a7a52fa978 --- /dev/null +++ b/images/Shaft_02533.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b521aa33e4ac50380eda21effd667da972fc32a09b33cbcc5c79520ceb75bc50 +size 95440 diff --git a/images/Shaft_02534.png b/images/Shaft_02534.png new file mode 100644 index 0000000000000000000000000000000000000000..10932741636b0a149b31f52160c75cf743f02be7 --- /dev/null +++ b/images/Shaft_02534.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3b63a4cd1ff538c55db46dfd2e41b792886bbc3fd7ad576b4e26db6a3d9e4b0 +size 87715 diff --git a/images/Shaft_02535.png b/images/Shaft_02535.png new file mode 100644 index 0000000000000000000000000000000000000000..53daa244c1dfd9378f24e2f493a90bf3abe59bd8 --- /dev/null +++ b/images/Shaft_02535.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e2e85cdf430342309da2b20a3744c77e9cb635ef6a5e32286c22af40e7071e3 +size 81413 diff --git a/images/Shaft_02536.png b/images/Shaft_02536.png new file mode 100644 index 0000000000000000000000000000000000000000..4fdacaa5f98c5bccf135f70e0a9f8a478925d87a --- /dev/null +++ b/images/Shaft_02536.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3c72eed82db866424d1b846f129cda2d8553498bd7e8b2c454e2c174d911338 +size 82581 diff --git a/images/Shaft_02537.png b/images/Shaft_02537.png new file mode 100644 index 0000000000000000000000000000000000000000..44bea3f2a91892c45aa3ec8425cc3386a5a3726c --- /dev/null +++ b/images/Shaft_02537.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:adb59bb2126fa0a18bf1154c8a57a4ae84b7297e1b76c616bdd245d45af409c4 +size 97473 diff --git a/images/Shaft_02538.png b/images/Shaft_02538.png new file mode 100644 index 0000000000000000000000000000000000000000..d81fe46bf7e5a3e620b84b7ec9f028baa1b55218 --- /dev/null +++ b/images/Shaft_02538.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72733917c51f4d795a3bb1c2a6667cc6dfbb6b9ad865f83226b382795b0a18e8 +size 70974 diff --git a/images/Shaft_02539.png b/images/Shaft_02539.png new file mode 100644 index 0000000000000000000000000000000000000000..ad847278daa3ac04c808cc154aea81d68266810b --- /dev/null +++ b/images/Shaft_02539.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9d119ffe3a1353eba0addbf0948991f9e1ca04d3069a4996598bf033f5cdd30 +size 86468 diff --git a/images/Shaft_02540.png b/images/Shaft_02540.png new file mode 100644 index 0000000000000000000000000000000000000000..240372521406e2ad10019ab1233d0afbf9b8bb54 --- /dev/null +++ b/images/Shaft_02540.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f413eda02d3f2e77ddb7477726266c7fc8730737059fea8171ed573e3abad6c +size 76248 diff --git a/images/Shaft_02541.png b/images/Shaft_02541.png new file mode 100644 index 0000000000000000000000000000000000000000..483774be245941e590a98f58d38c15a9e4f4380d --- /dev/null +++ b/images/Shaft_02541.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc1487fbba14f0afa3ef5365f4cd93b1933d68625a16c55f626bcc1d0b0feb47 +size 74284 diff --git a/images/Shaft_02542.png b/images/Shaft_02542.png new file mode 100644 index 0000000000000000000000000000000000000000..216b9904942c08a04aabff4a87c25e6d7d13d45e --- /dev/null +++ b/images/Shaft_02542.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bef5aa6728bde288a1eb5a5069f3fb2a81c4721c1d0fad282890948116d8135d +size 104787 diff --git a/images/Shaft_02543.png b/images/Shaft_02543.png new file mode 100644 index 0000000000000000000000000000000000000000..a2f1d0a26bc8b92c7b088d27ec0e07b7f3e13edc --- /dev/null +++ b/images/Shaft_02543.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9611b78d158c40c63f9e9d85d9880c21263c3cba43c57582104fe3b031247fc +size 90885 diff --git a/images/Shaft_02544.png b/images/Shaft_02544.png new file mode 100644 index 0000000000000000000000000000000000000000..4b9292c2889388bf9f367a00ccca03eadc086343 --- /dev/null +++ b/images/Shaft_02544.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7fe50224b57733d95b438f269277f21fd59947af0b14b0601d5bb2cf623ac34 +size 82728 diff --git a/images/Shaft_02545.png b/images/Shaft_02545.png new file mode 100644 index 0000000000000000000000000000000000000000..49537dbf303a3a29995dd329d368581a157113f0 --- /dev/null +++ b/images/Shaft_02545.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60514d98ce7687baa74b140132f4a724fbdebefe7182d4fcdb98cb890af87d87 +size 91756 diff --git a/images/Shaft_02546.png b/images/Shaft_02546.png new file mode 100644 index 0000000000000000000000000000000000000000..94f1cc411bb3a0c73ad19f42558e1603589818cf --- /dev/null +++ b/images/Shaft_02546.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31438482b7eaa9789f9b410513cd29514cdfade8620f51587191700523350d83 +size 71080 diff --git a/images/Shaft_02547.png b/images/Shaft_02547.png new file mode 100644 index 0000000000000000000000000000000000000000..36a8d14a7435b8e3bea8139775d962196e17c489 --- /dev/null +++ b/images/Shaft_02547.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54d99dd88f551974de1af7db5ac6fa6c765f1c5df92b9e6045394a914289674d +size 72201 diff --git a/images/Shaft_02548.png b/images/Shaft_02548.png new file mode 100644 index 0000000000000000000000000000000000000000..0cd53d54cbf94b57875e7137a5e404bff101a1b8 --- /dev/null +++ b/images/Shaft_02548.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46ed8e6ce62dff6ba324f6eb1325f22b3e30361354a3a5d8fc65a1529da5c275 +size 87669 diff --git a/images/Shaft_02549.png b/images/Shaft_02549.png new file mode 100644 index 0000000000000000000000000000000000000000..60fcfe2c9236acbfeacf501bedecbf040a9505bb --- /dev/null +++ b/images/Shaft_02549.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1946b9d1d160d8f280d637e63037015c665b8dc3ee710cf9eae69aa3b84c4e2a +size 94682 diff --git a/images/Shaft_02550.png b/images/Shaft_02550.png new file mode 100644 index 0000000000000000000000000000000000000000..2fcc3e4abf60e047fcd21d71446b4a42b4a6bde2 --- /dev/null +++ b/images/Shaft_02550.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87bb729d8624f404f54f03111145ac0ae8de3983f053f32cccc08a35e4a4cdf7 +size 76380 diff --git a/images/Shaft_02551.png b/images/Shaft_02551.png new file mode 100644 index 0000000000000000000000000000000000000000..541165eda013b607965116999c11cde1f6ba6c97 --- /dev/null +++ b/images/Shaft_02551.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24d486e2d129f891a1fe24ae9bba2c68b7bbd6ebaa91b40c24f0c38d025930c5 +size 80791 diff --git a/images/Shaft_02552.png b/images/Shaft_02552.png new file mode 100644 index 0000000000000000000000000000000000000000..02e5c1625cf06d00a150ac39d4f2e13bae060a27 --- /dev/null +++ b/images/Shaft_02552.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eaa9b120e97a98940fd3d8820acab8d55eb6834d312b82d03363f65066d60e98 +size 80867 diff --git a/images/Shaft_02553.png b/images/Shaft_02553.png new file mode 100644 index 0000000000000000000000000000000000000000..e7d8b1980093776b98cfc37b8d1a8a470f2f24b9 --- /dev/null +++ b/images/Shaft_02553.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa9c3c68a78f845fd57194573eaf470c2391e1b43aa608ea1d28e5e0b1f2436f +size 73559 diff --git a/images/Shaft_02554.png b/images/Shaft_02554.png new file mode 100644 index 0000000000000000000000000000000000000000..8103f4f58b0bd06b216caf403c4610bc3d5a60af --- /dev/null +++ b/images/Shaft_02554.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4899bd5f71bfc49bae7bebd9b8bc3f2aa805703d7bcf29ef40643e20bff2a278 +size 111692 diff --git a/images/Shaft_02555.png b/images/Shaft_02555.png new file mode 100644 index 0000000000000000000000000000000000000000..cf230f5666461e011726b5badbedb6ddfa183fec --- /dev/null +++ b/images/Shaft_02555.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b63a7b8b4ebd3def0d72a458c49f9ba8a3d6107659023fafe094b0b959a564f7 +size 85079 diff --git a/images/Shaft_02556.png b/images/Shaft_02556.png new file mode 100644 index 0000000000000000000000000000000000000000..b0d3bee7cbab21d80c7dd0f6a32d66f23397528a --- /dev/null +++ b/images/Shaft_02556.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e47684b52ce41be11865adbb10e0a6c0ee791c9fa1a92c76d82cd710f700745 +size 90467 diff --git a/images/Shaft_02557.png b/images/Shaft_02557.png new file mode 100644 index 0000000000000000000000000000000000000000..d8e77c41811455b56bdeb08e7f2e503f67214e50 --- /dev/null +++ b/images/Shaft_02557.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:574c3e494150bc9aa1227272a886b718e6737b9f1896a4d67f62396b9ce4926b +size 91274 diff --git a/images/Shaft_02558.png b/images/Shaft_02558.png new file mode 100644 index 0000000000000000000000000000000000000000..0b27ed74c8bd82b20aaa51c2883f866291d7c29b --- /dev/null +++ b/images/Shaft_02558.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb4825fc5f7caba3f10385340987d4454d0218c927fcb9a8250992fec012c58b +size 92922 diff --git a/images/Shaft_02559.png b/images/Shaft_02559.png new file mode 100644 index 0000000000000000000000000000000000000000..828579ad7a0a8fd7dc8d56021f42f1b65cb434a3 --- /dev/null +++ b/images/Shaft_02559.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f566dc9e8eb0edfa1d79626f287d7a10e0a64ad5f5460532dabb0077f4733199 +size 83359 diff --git a/images/Shaft_02560.png b/images/Shaft_02560.png new file mode 100644 index 0000000000000000000000000000000000000000..73fe05e37a7174e7401cb92caa19db99a378c6a7 --- /dev/null +++ b/images/Shaft_02560.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14aca914965a562a1de1be19213904d1b62aa0bc50ba5cfff98e2140b5cf41e3 +size 70990 diff --git a/images/Shaft_02561.png b/images/Shaft_02561.png new file mode 100644 index 0000000000000000000000000000000000000000..0619c0c5cb4e4efe900a2152cd12e7bae603c99c --- /dev/null +++ b/images/Shaft_02561.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c00d6355e8ae1c891313a8a03b67c0650ab320c26baf6e2644b828ede3a63848 +size 80900 diff --git a/images/Shaft_02562.png b/images/Shaft_02562.png new file mode 100644 index 0000000000000000000000000000000000000000..df5f9065e22b16bcf42365074b0e7c0c893b9444 --- /dev/null +++ b/images/Shaft_02562.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd6b89639eb796141263e776f4d5fedb85d497be476753267dae78c592190f85 +size 91289 diff --git a/images/Shaft_02563.png b/images/Shaft_02563.png new file mode 100644 index 0000000000000000000000000000000000000000..acc40c81e4366161f9232913e7915080bbca5bc2 --- /dev/null +++ b/images/Shaft_02563.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98476209800cb5e99ce27ea2dcdb92db096374cd31901f758637d4d22fb5c40d +size 117327 diff --git a/images/Shaft_02564.png b/images/Shaft_02564.png new file mode 100644 index 0000000000000000000000000000000000000000..c4d9a55ed0a5269c0ce71e4b9c630ee906babcca --- /dev/null +++ b/images/Shaft_02564.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a9e7dbc75c54fa20cb72a7fdaccddf71ff58809afa621a2920b67cab4521c83 +size 92253 diff --git a/images/Shaft_02565.png b/images/Shaft_02565.png new file mode 100644 index 0000000000000000000000000000000000000000..d95f078ab77129e1ca97d2605ae885bb6c8c0cea --- /dev/null +++ b/images/Shaft_02565.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:715b78a87be188f47501cba9714176fa42dfbd57acd02c78646ca48074999029 +size 110829 diff --git a/images/Shaft_02566.png b/images/Shaft_02566.png new file mode 100644 index 0000000000000000000000000000000000000000..a7af8f5bda3ce569ad1c203945f7c2d75393325b --- /dev/null +++ b/images/Shaft_02566.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a4ef0404172b025faa29e7dc3a9a8933234ecfd7cd18216b1b4927267ca834a +size 79137 diff --git a/images/Shaft_02567.png b/images/Shaft_02567.png new file mode 100644 index 0000000000000000000000000000000000000000..ff17221bd8f6d37f2041a3fdf73ec367600b42e4 --- /dev/null +++ b/images/Shaft_02567.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:720663cc0546c38f40bbd755372ba900bf7c59f0355dda9816ba92287b19d020 +size 70731 diff --git a/images/Shaft_02568.png b/images/Shaft_02568.png new file mode 100644 index 0000000000000000000000000000000000000000..07b81dca3add250821fb115841907584b14fa797 --- /dev/null +++ b/images/Shaft_02568.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a443ed6a085aefb01fd56e82c16a93d178299c0970cca4136b5568a99f2d3ce4 +size 91200 diff --git a/images/Shaft_02569.png b/images/Shaft_02569.png new file mode 100644 index 0000000000000000000000000000000000000000..65355eb878b98c7883fe4e6658087bf46eed7c08 --- /dev/null +++ b/images/Shaft_02569.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f8afc1a13e6959538c2be7a832e04a3a0af68229f9ec935bdc8c0f4d4d8e40d +size 75640 diff --git a/images/Shaft_02570.png b/images/Shaft_02570.png new file mode 100644 index 0000000000000000000000000000000000000000..f752c3d73f2238376d3bd0ed2416bb17a89937f2 --- /dev/null +++ b/images/Shaft_02570.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57d92989bb5f08df0f11c01409233d0809d693e79af0581cd6548e15434c15d2 +size 74230 diff --git a/images/Shaft_02571.png b/images/Shaft_02571.png new file mode 100644 index 0000000000000000000000000000000000000000..db07b54b706d07b824ffd93aebf55b3534983054 --- /dev/null +++ b/images/Shaft_02571.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12072bd0c2f1e8f6eb91225ba51a31a5dc1dea649c62eabc5db94b3ab3597b93 +size 99272 diff --git a/images/Shaft_02572.png b/images/Shaft_02572.png new file mode 100644 index 0000000000000000000000000000000000000000..539c3d711f177e8408ee5bb334bc57b6dcf77a08 --- /dev/null +++ b/images/Shaft_02572.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d69836b6d168501a98d4f0545ba9a2300b03c7bf37d8c52f091719a5040fd65 +size 89446 diff --git a/images/Shaft_02573.png b/images/Shaft_02573.png new file mode 100644 index 0000000000000000000000000000000000000000..1ebb2fbaeafe4a766ee600f8a1ce7dd5e9fe5e79 --- /dev/null +++ b/images/Shaft_02573.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49aea6cdf65c9c41b510881c5af31a66b1829de0f948e809ce583790123880a0 +size 104764 diff --git a/images/Shaft_02574.png b/images/Shaft_02574.png new file mode 100644 index 0000000000000000000000000000000000000000..edc6688b5c3ec8c418cce5424403581fe1b66b66 --- /dev/null +++ b/images/Shaft_02574.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a849693aa9e517679966d01ae3b052723e75800fcca293ffe548a01c1c208f02 +size 75838 diff --git a/images/Shaft_02575.png b/images/Shaft_02575.png new file mode 100644 index 0000000000000000000000000000000000000000..711df854acfd09d31b654c554488a50e4fcd8df8 --- /dev/null +++ b/images/Shaft_02575.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58258e90bf15724d35b7a7e405733492c1c382547eda1addb3028fb76714a608 +size 79478 diff --git a/images/Shaft_02576.png b/images/Shaft_02576.png new file mode 100644 index 0000000000000000000000000000000000000000..34e5db95d0ca718a1ebcb0f3d5a18f834a0f0f26 --- /dev/null +++ b/images/Shaft_02576.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37d568aaaf97ecd41dc0c25f83d4abd682b36bec2dd59f79f01ad9bff2c780e6 +size 88870 diff --git a/images/Shaft_02577.png b/images/Shaft_02577.png new file mode 100644 index 0000000000000000000000000000000000000000..a98490bfa7f720e11053dd78c0ea1c304f3a178a --- /dev/null +++ b/images/Shaft_02577.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddf2f7ceb3a8b9d8e1be28375e6cb3329061fc38d599cefe226b2e4584028380 +size 82284 diff --git a/images/Shaft_02578.png b/images/Shaft_02578.png new file mode 100644 index 0000000000000000000000000000000000000000..69f929142f799018e310d1a82105e112ca0ac97d --- /dev/null +++ b/images/Shaft_02578.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c4b9b371df9c88c64af5a72b3a142379ddd0f037456f2c0ce28225b592f6602 +size 69462 diff --git a/images/Shaft_02579.png b/images/Shaft_02579.png new file mode 100644 index 0000000000000000000000000000000000000000..a6dc3569620b6de3fadbbccc35053ab21ca73f9d --- /dev/null +++ b/images/Shaft_02579.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8eaeb0cf4ad553e6fb8c1850000c32988dfde966b4e9b902bc18e43178afd15 +size 73170 diff --git a/images/Shaft_02580.png b/images/Shaft_02580.png new file mode 100644 index 0000000000000000000000000000000000000000..9a928aed20331186d5e335bbee873301e3f2fe44 --- /dev/null +++ b/images/Shaft_02580.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0635b1cb686cc2cd7a51e1df0058d7d30aafb2557945cb3aafd74393bb931298 +size 76280 diff --git a/images/Shaft_02581.png b/images/Shaft_02581.png new file mode 100644 index 0000000000000000000000000000000000000000..1465d9d7fb6274403794f0b21be1215c24c31f6a --- /dev/null +++ b/images/Shaft_02581.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db24477d008b0d4c0446a86cf2e6b6d6f654fa6f2ccec2a5dd546e54a8c1c9ef +size 79182 diff --git a/images/Shaft_02582.png b/images/Shaft_02582.png new file mode 100644 index 0000000000000000000000000000000000000000..eee2097b42ef9e4be838386c41396802e0fecf37 --- /dev/null +++ b/images/Shaft_02582.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f437677b690b8ec00971a5a2f38e1b2c3dd44dc88c0cd42d3bb264d4fd0894ba +size 71348 diff --git a/images/Shaft_02583.png b/images/Shaft_02583.png new file mode 100644 index 0000000000000000000000000000000000000000..70c6b47d2fa72e881046c065d4b2b09893db5b75 --- /dev/null +++ b/images/Shaft_02583.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4aa7835251aef3b38ae1dc333fe0d35f3f26aaf8fd294f4b06c5d60b70111d4 +size 76926 diff --git a/images/Shaft_02584.png b/images/Shaft_02584.png new file mode 100644 index 0000000000000000000000000000000000000000..a736a893e8bfcf236e416e268c17d2bdf87551a2 --- /dev/null +++ b/images/Shaft_02584.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f58e4b76871ada625e4f719a68b5229c540bb787c2ab92885915c612dbc6839f +size 82688 diff --git a/images/Shaft_02585.png b/images/Shaft_02585.png new file mode 100644 index 0000000000000000000000000000000000000000..2a699cca8c81f34b346a3eba36d8facc62c9a6bb --- /dev/null +++ b/images/Shaft_02585.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8aa7e43f923430217c63ff264aa2f2fc27934644e94e9703c34b3edac214db7 +size 75324 diff --git a/images/Shaft_02586.png b/images/Shaft_02586.png new file mode 100644 index 0000000000000000000000000000000000000000..a1ea218e9c244e00506c10c7a27f09d18e154ba4 --- /dev/null +++ b/images/Shaft_02586.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c35649f40c70610e22b1a7652ec6736e496df00b0a0c027dd0a1b193a54b4aea +size 89046 diff --git a/images/Shaft_02587.png b/images/Shaft_02587.png new file mode 100644 index 0000000000000000000000000000000000000000..57ff494818a8e426e15667779ccecebdc3340bb6 --- /dev/null +++ b/images/Shaft_02587.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd65cd4bac9ece57c11bbad0dc7ada2610e483e12f71c89b1dcc5baeeb77f179 +size 102392 diff --git a/images/Shaft_02588.png b/images/Shaft_02588.png new file mode 100644 index 0000000000000000000000000000000000000000..382952f1565113563f6f1ad650743186aba8a021 --- /dev/null +++ b/images/Shaft_02588.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac974af2d4b1b1141362b9fdc9d21951408a297e72f22b6f3bf59d54b49ca091 +size 86013 diff --git a/images/Shaft_02589.png b/images/Shaft_02589.png new file mode 100644 index 0000000000000000000000000000000000000000..4c59224aff0e3a6fcdae5d078aafe44138592191 --- /dev/null +++ b/images/Shaft_02589.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fdf3d9386742a29b9ae6500e24bf6b517025eb75b22272a3e988dfaffff85268 +size 87325 diff --git a/images/Shaft_02590.png b/images/Shaft_02590.png new file mode 100644 index 0000000000000000000000000000000000000000..8aed2af4dab32bb0b26e90564c3115f5abab4576 --- /dev/null +++ b/images/Shaft_02590.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b10750b7f55d27cc04aa67949f98290fda025a1c38410379b24b9a5524c266d8 +size 81799 diff --git a/images/Shaft_02591.png b/images/Shaft_02591.png new file mode 100644 index 0000000000000000000000000000000000000000..28c8eebf7eb50307ea811b991403163005cd4d12 --- /dev/null +++ b/images/Shaft_02591.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc4ee06aead90ba34fa06d8534b514764e05e3beb7101377412d08c4039797f8 +size 82853 diff --git a/images/Shaft_02592.png b/images/Shaft_02592.png new file mode 100644 index 0000000000000000000000000000000000000000..b90864b954218a6fa05adec72ee83632a2748075 --- /dev/null +++ b/images/Shaft_02592.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:827ee96c35a25f5b13f3e775fd0d0c10a156602bc2054513a051d6508179d344 +size 86218 diff --git a/images/Shaft_02593.png b/images/Shaft_02593.png new file mode 100644 index 0000000000000000000000000000000000000000..d6051da8fdea50269634d6c1ab8074b9a15043a9 --- /dev/null +++ b/images/Shaft_02593.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6756e71ef5be5632f8ea9aa8213ab733fb3e6e27e8d24cd4c6d6961c894f8265 +size 81481 diff --git a/images/Shaft_02594.png b/images/Shaft_02594.png new file mode 100644 index 0000000000000000000000000000000000000000..336a0bd3197fa4e35e3f69ad7a960907c1e2c58d --- /dev/null +++ b/images/Shaft_02594.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78da5e2b121059f47808e596c41854e66cf01504bf9199ba76f43e0b6d5f748d +size 76928 diff --git a/images/Shaft_02595.png b/images/Shaft_02595.png new file mode 100644 index 0000000000000000000000000000000000000000..b2fee6d077193d92963758258edd6a7862592cb7 --- /dev/null +++ b/images/Shaft_02595.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:524c5f52d7a64ab4f5433920271e346d3d8a3b66fca3b6d3bd60f74161ac4d1c +size 78381 diff --git a/images/Shaft_02596.png b/images/Shaft_02596.png new file mode 100644 index 0000000000000000000000000000000000000000..996a29339acf5e2c3a08422875d1092f6269e297 --- /dev/null +++ b/images/Shaft_02596.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b38cd4b42a7da12c465d64f0d3483ded68a5427594e47d74e4d3805c44a08671 +size 81446 diff --git a/images/Shaft_02597.png b/images/Shaft_02597.png new file mode 100644 index 0000000000000000000000000000000000000000..451a73583b1b2878054f6250311ee7fdb22ce755 --- /dev/null +++ b/images/Shaft_02597.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5797b2a98a6aa24918969c72034ede35aacb66f5bdb49da87975884e1793da8f +size 69290 diff --git a/images/Shaft_02598.png b/images/Shaft_02598.png new file mode 100644 index 0000000000000000000000000000000000000000..4cf1dc34cdfe0ce793cef2a8611b901a26b034f1 --- /dev/null +++ b/images/Shaft_02598.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7163fad31b50d526e39eb1accdc1263d7f73e7ea8f6b267e9e947485ef9bc7f5 +size 74769 diff --git a/images/Shaft_02599.png b/images/Shaft_02599.png new file mode 100644 index 0000000000000000000000000000000000000000..9ad06f20fa27d2da51192e5afe1528c2499a4452 --- /dev/null +++ b/images/Shaft_02599.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f87823598ba25e3054c8b986e9ac5c2bc8f575ea022fc3c3371397789132125 +size 90727 diff --git a/images/Shaft_02600.png b/images/Shaft_02600.png new file mode 100644 index 0000000000000000000000000000000000000000..4f1e6625cfefdfea2d16af26eae210d4778aa758 --- /dev/null +++ b/images/Shaft_02600.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a97e1b64cf85e60fbbaaaff72d82573b82add841423203ed45bed94eb3b864c +size 108189 diff --git a/images/Shaft_02601.png b/images/Shaft_02601.png new file mode 100644 index 0000000000000000000000000000000000000000..f534ca5177f085aea2b694bf5a5985013fef458a --- /dev/null +++ b/images/Shaft_02601.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fed52fc2938b6b9eded416ef496dfc6f152818862e5215c89d4e44fd24860f46 +size 67511 diff --git a/images/Shaft_02602.png b/images/Shaft_02602.png new file mode 100644 index 0000000000000000000000000000000000000000..2960e1c806c51091358c2d590073b1b6b853b722 --- /dev/null +++ b/images/Shaft_02602.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59d8b62ef1f6e991ace919c6fab6c18855c9e1c31b53768a828a1b75aae3361b +size 103207 diff --git a/images/Shaft_02603.png b/images/Shaft_02603.png new file mode 100644 index 0000000000000000000000000000000000000000..c8462ab1dc6b1e6205fdc2729466d82344e118c9 --- /dev/null +++ b/images/Shaft_02603.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3c6547a2c207cb6a5fb12d1d439c02082e11b569f20c561160c0f0e7b7ce0b1 +size 95848 diff --git a/images/Shaft_02604.png b/images/Shaft_02604.png new file mode 100644 index 0000000000000000000000000000000000000000..eeb8c7d71d9670c061ab611606e96b7463df56b3 --- /dev/null +++ b/images/Shaft_02604.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c7ef5b0571291aaba561f43ef4187cc03e8d2f9e87a0770a4c81b124eabbd22 +size 88965 diff --git a/images/Shaft_02605.png b/images/Shaft_02605.png new file mode 100644 index 0000000000000000000000000000000000000000..1ad2fd3ce99a89567612bea13190dae10941895c --- /dev/null +++ b/images/Shaft_02605.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c700c2edf1c1d2ce1af7c168c11a6bb8b7e072c6815cef3dea1d4aab3944854 +size 74782 diff --git a/images/Shaft_02606.png b/images/Shaft_02606.png new file mode 100644 index 0000000000000000000000000000000000000000..149aba8c4b15ec4a816051c5bc142be953a7443e --- /dev/null +++ b/images/Shaft_02606.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d102f0949bafd01a8a411db6f3f17417e6ce0e4d2534d260602d3cc9b80eca25 +size 98570 diff --git a/images/Shaft_02607.png b/images/Shaft_02607.png new file mode 100644 index 0000000000000000000000000000000000000000..b19da074346b8f51a875badd24eb865b6cad330e --- /dev/null +++ b/images/Shaft_02607.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94a7e16df51ae6e4205e16f428163f470b984de9274d64dbf6f2028d5f1e86e0 +size 99076 diff --git a/images/Shaft_02608.png b/images/Shaft_02608.png new file mode 100644 index 0000000000000000000000000000000000000000..7e442bbed02b3cef14ee1c17008ae9177d470d6b --- /dev/null +++ b/images/Shaft_02608.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0727795ff62fb298ed1cdce6dfe8de1136b5f8817e31a64080db404803d5496b +size 79453 diff --git a/images/Shaft_02609.png b/images/Shaft_02609.png new file mode 100644 index 0000000000000000000000000000000000000000..cf94af8a9948a15b75ea37e6f072b70d93249b79 --- /dev/null +++ b/images/Shaft_02609.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:104fc0d9fdbae7c0f158d9654028df4c7dbd0de7bd11de807d2e84420985ec9b +size 104934 diff --git a/images/Shaft_02610.png b/images/Shaft_02610.png new file mode 100644 index 0000000000000000000000000000000000000000..9fe4ff3c0e5c1d39840f6b97afb4b451d87470b5 --- /dev/null +++ b/images/Shaft_02610.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f2caf5c7aa85426d5cd6374cb6197b909c6852cb84967eafe51555f49ab18ba +size 83392 diff --git a/images/Shaft_02611.png b/images/Shaft_02611.png new file mode 100644 index 0000000000000000000000000000000000000000..878eb50056536f6261a54d76d8f204944a22dcf6 --- /dev/null +++ b/images/Shaft_02611.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa5a44e20f6a0224fadf093669a1e6667ebc165dcc71ace5a7f83abe5e22c2ff +size 82945 diff --git a/images/Shaft_02612.png b/images/Shaft_02612.png new file mode 100644 index 0000000000000000000000000000000000000000..1884b596da5c3a83a681a0d2b9bf0a52771c2097 --- /dev/null +++ b/images/Shaft_02612.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c6d73c93d2854dfc523ccb61ad3d8b9dbeb4b1b547b80c187dd896d2a0410b3 +size 72090 diff --git a/images/Shaft_02613.png b/images/Shaft_02613.png new file mode 100644 index 0000000000000000000000000000000000000000..35cc6398fec6d04d37ea1af02d68e1986a566b84 --- /dev/null +++ b/images/Shaft_02613.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8770f2605ec6240a995560d7feabff4295423403e8a72e296b798a6c5c5058b2 +size 79886 diff --git a/images/Shaft_02614.png b/images/Shaft_02614.png new file mode 100644 index 0000000000000000000000000000000000000000..2efd0579d185205c92b282be7df6a395080df2c4 --- /dev/null +++ b/images/Shaft_02614.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a65bc48e812f446eadd369abeba68886ad000e59b85132c04fc0ecd9e07c4ca +size 103862 diff --git a/images/Shaft_02615.png b/images/Shaft_02615.png new file mode 100644 index 0000000000000000000000000000000000000000..4d4d52daacc3b35e5ec5ef1894c67be0da3b6442 --- /dev/null +++ b/images/Shaft_02615.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0af0c598f00ad3b27c0b33364f2f0afe9d76e40017197262fe12d6895eb97b4d +size 104383 diff --git a/images/Shaft_02616.png b/images/Shaft_02616.png new file mode 100644 index 0000000000000000000000000000000000000000..ba0b8da6986ee082aec2cb261158e4bbd1804a9a --- /dev/null +++ b/images/Shaft_02616.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9ef263a7a6b62b0f08ab3fec0410505c43f3cb9c139ab323304cc386d1b92a3 +size 117528 diff --git a/images/Shaft_02617.png b/images/Shaft_02617.png new file mode 100644 index 0000000000000000000000000000000000000000..ff7e201efe8095dd63fbc88b1181fab4797bdb9a --- /dev/null +++ b/images/Shaft_02617.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c790501b05f5f0fada99f98fb3d7cdbdc2af62b3f2907507a12e6bf1c9edb25 +size 73113 diff --git a/images/Shaft_02618.png b/images/Shaft_02618.png new file mode 100644 index 0000000000000000000000000000000000000000..c9574011e50bc545fc80a13adb99c80e6a8af41b --- /dev/null +++ b/images/Shaft_02618.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e09a248cee595b72f74102b24287de924be39c476821e8315647b67d752012d +size 107098 diff --git a/images/Shaft_02619.png b/images/Shaft_02619.png new file mode 100644 index 0000000000000000000000000000000000000000..99e424a23f7168915429b3fc20e874ccac0da56c --- /dev/null +++ b/images/Shaft_02619.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75248186821c6917775097ac8e6246408bcd7694cb2de0b8c8e6dce6388efca6 +size 91422 diff --git a/images/Shaft_02620.png b/images/Shaft_02620.png new file mode 100644 index 0000000000000000000000000000000000000000..5fc621142babe473ed8a9bd3b5b75523aa9bb133 --- /dev/null +++ b/images/Shaft_02620.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc1736be869cf58f611325b80206ed5cc21258e029255e1d5cb58b7efd2d7c20 +size 102562 diff --git a/images/Shaft_02621.png b/images/Shaft_02621.png new file mode 100644 index 0000000000000000000000000000000000000000..06bfb09aa2fb747bef5637f4b59118849db66c0d --- /dev/null +++ b/images/Shaft_02621.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f469dd4886f9f2f635813d4b91cb08d439cd2aff919299056a9d0c7cb9448257 +size 96913 diff --git a/images/Shaft_02622.png b/images/Shaft_02622.png new file mode 100644 index 0000000000000000000000000000000000000000..f56634768b444931708b145603c82785a5aa0aed --- /dev/null +++ b/images/Shaft_02622.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:647ed8adb73916016b3a89e5256836be16d70e637d7de7addc76e0df20aecb5a +size 93478 diff --git a/images/Shaft_02623.png b/images/Shaft_02623.png new file mode 100644 index 0000000000000000000000000000000000000000..2d113205691e920881a69127c13121cfcc8bbfcd --- /dev/null +++ b/images/Shaft_02623.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5accecab3b4cb5ba3c5e9778a836e29d82c3e5da2a437961cf5ac0e5bcdb0d77 +size 73953 diff --git a/images/Shaft_02624.png b/images/Shaft_02624.png new file mode 100644 index 0000000000000000000000000000000000000000..6b9592b813c7578b686ca73bf3d3308500e93466 --- /dev/null +++ b/images/Shaft_02624.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27e3805b1538384ccd68977d985208b390ab2e30dd7df90dc97ff587678bd212 +size 93706 diff --git a/images/Shaft_02625.png b/images/Shaft_02625.png new file mode 100644 index 0000000000000000000000000000000000000000..60339b10d150722dcc729dd73885da3f52792bdf --- /dev/null +++ b/images/Shaft_02625.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bff4cb312682ce1460bdf5f8d0480ceaa8e3cff89a9b7729e057b68f51c163ef +size 85644 diff --git a/images/Shaft_02626.png b/images/Shaft_02626.png new file mode 100644 index 0000000000000000000000000000000000000000..c508d798e24b71cb1075f5d4f89bfec5047e2159 --- /dev/null +++ b/images/Shaft_02626.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f17db385801155e3e5fa9485ad9a808ad1337f1be7f0d183eabc1fd94f92253a +size 80265 diff --git a/images/Shaft_02627.png b/images/Shaft_02627.png new file mode 100644 index 0000000000000000000000000000000000000000..28f4352fd29d74ae08c39ce4f801db2813426a89 --- /dev/null +++ b/images/Shaft_02627.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b84ffae166d802f60aa661f0a94d731d9be102c540e742168f39ea81ce2ecdcd +size 92191 diff --git a/images/Shaft_02628.png b/images/Shaft_02628.png new file mode 100644 index 0000000000000000000000000000000000000000..15f33b7687f41410ffbac279e1024581b377f564 --- /dev/null +++ b/images/Shaft_02628.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7475878c68a8a4729855b8e2322bb6415da37305429abcc7a05b570f2ea3bb88 +size 84396 diff --git a/images/Shaft_02629.png b/images/Shaft_02629.png new file mode 100644 index 0000000000000000000000000000000000000000..a85ad44df33af87559b37c7119da32290a2c6d07 --- /dev/null +++ b/images/Shaft_02629.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2fc75dce37a5a3c44b06d6f0c774c18b3fcac826a300c203b58e0bd410ccdeac +size 94290 diff --git a/images/Shaft_02630.png b/images/Shaft_02630.png new file mode 100644 index 0000000000000000000000000000000000000000..542af80598d107035bf4a850476d19be889007bd --- /dev/null +++ b/images/Shaft_02630.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa7954d65525920da82540b62ee706cb43ae7c12a808ae1b7a8c82eb554b783c +size 93871 diff --git a/images/Shaft_02631.png b/images/Shaft_02631.png new file mode 100644 index 0000000000000000000000000000000000000000..70114a51a62e75da6a25f0a63b1090261a620f46 --- /dev/null +++ b/images/Shaft_02631.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4026e2c18e56217a185ec575a5900dced144a0af1aea384be1f4c624480fb58 +size 71043 diff --git a/images/Shaft_02632.png b/images/Shaft_02632.png new file mode 100644 index 0000000000000000000000000000000000000000..a37db7172dd4e8c26652db2350a7bcd2be9d38c3 --- /dev/null +++ b/images/Shaft_02632.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef98578940721549899e341775d6393794b1850c5d41ef16f944b926dfd2ce3f +size 96934 diff --git a/images/Shaft_02633.png b/images/Shaft_02633.png new file mode 100644 index 0000000000000000000000000000000000000000..28b725508ab18e91bfd24b2279c46518c2ae0f22 --- /dev/null +++ b/images/Shaft_02633.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48637e98545c448a6a70679ee1371cff03ea33a09c1af0fa504b6722cbab1bae +size 85418 diff --git a/images/Shaft_02634.png b/images/Shaft_02634.png new file mode 100644 index 0000000000000000000000000000000000000000..698b1279c2c20d856627e4e7333252fc681bd230 --- /dev/null +++ b/images/Shaft_02634.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e72ade46cfc0e3be5124ddc4b97932c8b3776b22c6d349a3d7c366815d154f7d +size 69772 diff --git a/images/Shaft_02635.png b/images/Shaft_02635.png new file mode 100644 index 0000000000000000000000000000000000000000..357fc4af58c4657d2ece18804ea0e7ef0f63894d --- /dev/null +++ b/images/Shaft_02635.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1401597e3da147267d88df86c43fe503dc8665578cfd665538b2554a6fd9c8c5 +size 73491 diff --git a/images/Shaft_02636.png b/images/Shaft_02636.png new file mode 100644 index 0000000000000000000000000000000000000000..ed14c0961eb43a8c7b93e9036a0a402691732505 --- /dev/null +++ b/images/Shaft_02636.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05ccabe12f567de416b30b6185177d81aedc957a732328de6f49d6e72e931220 +size 95454 diff --git a/images/Shaft_02637.png b/images/Shaft_02637.png new file mode 100644 index 0000000000000000000000000000000000000000..879bc67e6dcb01762f8d9ee3e2c8015e8971e387 --- /dev/null +++ b/images/Shaft_02637.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e12f120c33ff9edead27e4ecd93b938128240dd85b455f8fe2892636263a1a52 +size 72622 diff --git a/images/Shaft_02638.png b/images/Shaft_02638.png new file mode 100644 index 0000000000000000000000000000000000000000..8f428bca5c59042aa6694234397320cbf8fafaa4 --- /dev/null +++ b/images/Shaft_02638.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1585979163157cbb1fb15b7e322ac9668901b49ba56f796ab5b8efb3814ca85 +size 115237 diff --git a/images/Shaft_02639.png b/images/Shaft_02639.png new file mode 100644 index 0000000000000000000000000000000000000000..f649f1a6006a4adaab69fd51bbfeba507c704496 --- /dev/null +++ b/images/Shaft_02639.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bff9f037cecb9467b2230b57f101eb5163fab8874a6304d9286fe7f50bf71625 +size 92486 diff --git a/images/Shaft_02640.png b/images/Shaft_02640.png new file mode 100644 index 0000000000000000000000000000000000000000..543da28c9fcc64fef32ee6e6cd63c3bce3830053 --- /dev/null +++ b/images/Shaft_02640.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9418b7cd6f5b9c93ce6324d51a8902b40a27ca039c636c0a663ba3670fc4e3d +size 86651 diff --git a/images/Shaft_02641.png b/images/Shaft_02641.png new file mode 100644 index 0000000000000000000000000000000000000000..61d5c72a76ffe09808dfb70f7a5ee5a2caf4c695 --- /dev/null +++ b/images/Shaft_02641.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06b727221ed64a69102e4665be111dadf5d1da50d7cad174cd844ef6d261bc84 +size 99660 diff --git a/images/Shaft_02642.png b/images/Shaft_02642.png new file mode 100644 index 0000000000000000000000000000000000000000..9981fc26881092e7666bbe46e491d9c49479130d --- /dev/null +++ b/images/Shaft_02642.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f65ee464cc0ef4fdc8880f67860eb33334efd8a76b7f2e93f19261b2d552585 +size 77274 diff --git a/images/Shaft_02643.png b/images/Shaft_02643.png new file mode 100644 index 0000000000000000000000000000000000000000..ffde7ea02f981feb6471234cf3c782283aac9fff --- /dev/null +++ b/images/Shaft_02643.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a57c288d2114940518a7a7eb060cac4a1557e46d5596630178fbce7e009210a5 +size 74931 diff --git a/images/Shaft_02644.png b/images/Shaft_02644.png new file mode 100644 index 0000000000000000000000000000000000000000..ede323517ec227f75b3ee2bf94d6a4d40767c93b --- /dev/null +++ b/images/Shaft_02644.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56b1f11fa0b97a096aac2548b62aecfee23567e2ddc711cbc9624457d552e639 +size 78879 diff --git a/images/Shaft_02645.png b/images/Shaft_02645.png new file mode 100644 index 0000000000000000000000000000000000000000..0314573f150959239b519777c70a2f885be756d2 --- /dev/null +++ b/images/Shaft_02645.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3f33fe02c03525fc85960a0b40fb727124e554c49b78e4971ab6fd6afa330dd +size 85613 diff --git a/images/Shaft_02646.png b/images/Shaft_02646.png new file mode 100644 index 0000000000000000000000000000000000000000..0b90f58a9612c6d38a15bed3ef49ce86716a36a2 --- /dev/null +++ b/images/Shaft_02646.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23c7144082775f1fc4144621dc2bf3d8f4ade2a326a64919d8126f5fe319985a +size 86420 diff --git a/images/Shaft_02647.png b/images/Shaft_02647.png new file mode 100644 index 0000000000000000000000000000000000000000..fdf1e97fedb25605bebbb1023d9277ba008c97bb --- /dev/null +++ b/images/Shaft_02647.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cea8ec6a3663d6ab46ee3b0c39c04104d46488e282a177178679a6cac55b4aaf +size 79150 diff --git a/images/Shaft_02648.png b/images/Shaft_02648.png new file mode 100644 index 0000000000000000000000000000000000000000..0618958cea0ec77f1e6ce26aa0aca3c62c3d7c15 --- /dev/null +++ b/images/Shaft_02648.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f546386ab5c6c3c76ddf4e38bcea0c10dde940528079913a17a1e840f5cac7b5 +size 96919 diff --git a/images/Shaft_02649.png b/images/Shaft_02649.png new file mode 100644 index 0000000000000000000000000000000000000000..b46a7cec6f761c1d7ee430cdcb2ace25968b621f --- /dev/null +++ b/images/Shaft_02649.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cef606aa6426b093241a6277e7913bac3747115b56f1726810858b163f930d3b +size 81864 diff --git a/images/Shaft_02650.png b/images/Shaft_02650.png new file mode 100644 index 0000000000000000000000000000000000000000..fa0f582f53b37d9ffaa5d74dc7ab8f4f8fa26123 --- /dev/null +++ b/images/Shaft_02650.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:891a2a12b18a8c8e7bc07976c1b4bc458ac6199da1e625484b1bf11782671506 +size 108711 diff --git a/images/Shaft_02651.png b/images/Shaft_02651.png new file mode 100644 index 0000000000000000000000000000000000000000..ec18c6e01299d585c03c866f3cabe46e90248814 --- /dev/null +++ b/images/Shaft_02651.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0db6212a4c25c90d855aeeb04c31521b4a7cf69b72598f08241456d234a986f +size 108340 diff --git a/images/Shaft_02652.png b/images/Shaft_02652.png new file mode 100644 index 0000000000000000000000000000000000000000..f4a17560a556797ca3e8379be86f63040767fcc4 --- /dev/null +++ b/images/Shaft_02652.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5422de06d075c1a5a465443a5d89a4c174663c58422860494e1a0671ceafc6ca +size 70518 diff --git a/images/Shaft_02653.png b/images/Shaft_02653.png new file mode 100644 index 0000000000000000000000000000000000000000..f6fff73a04c9c16f8bae796141db2a8b32da0904 --- /dev/null +++ b/images/Shaft_02653.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b831ced28bcd5f2cc02f7129a9aaf2848177f22c241fdf122657bc378c8cbb31 +size 84852 diff --git a/images/Shaft_02654.png b/images/Shaft_02654.png new file mode 100644 index 0000000000000000000000000000000000000000..7f21e25d74f8826494fedc52418548245adcf126 --- /dev/null +++ b/images/Shaft_02654.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9569f46f2f3a34cedd96c770b349c85f5a047b31f05538ded3dfdf4e24b175f2 +size 77856 diff --git a/images/Shaft_02655.png b/images/Shaft_02655.png new file mode 100644 index 0000000000000000000000000000000000000000..9db2d10de861a42dda4d4180e31896c31e6b76b6 --- /dev/null +++ b/images/Shaft_02655.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e097b15d3f4abb0640bf9143624aacd75c43764d883a6c60234095a869dd1989 +size 96544 diff --git a/images/Shaft_02656.png b/images/Shaft_02656.png new file mode 100644 index 0000000000000000000000000000000000000000..3b2705b71db4082141b6cf7f5d05c7173ea3178f --- /dev/null +++ b/images/Shaft_02656.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69b74f95a4ce491912413e339614342af689c492ff268526101d61907152d43e +size 105525 diff --git a/images/Shaft_02657.png b/images/Shaft_02657.png new file mode 100644 index 0000000000000000000000000000000000000000..12c34a40c524ea781171d19a232d32aeef8d2ac5 --- /dev/null +++ b/images/Shaft_02657.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b18de200d538a0ce866f3f3d78bd6e74a3427e21faa2e4905df38720d8f61ac +size 87365 diff --git a/images/Shaft_02658.png b/images/Shaft_02658.png new file mode 100644 index 0000000000000000000000000000000000000000..01574331dd19bce3fff42acef331339a9f3238c5 --- /dev/null +++ b/images/Shaft_02658.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6341726fa25ec83640dfdb953bd7a46ce82ed86ed18d89722091f4fe81820973 +size 76741 diff --git a/images/Shaft_02659.png b/images/Shaft_02659.png new file mode 100644 index 0000000000000000000000000000000000000000..6db8e49c1674f83ba2db19813c0b0c91dad47d30 --- /dev/null +++ b/images/Shaft_02659.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11862126bbfdbc98cf1c18bec5312a788818464a10eff7db9399c742df7ec9f9 +size 107985 diff --git a/images/Shaft_02660.png b/images/Shaft_02660.png new file mode 100644 index 0000000000000000000000000000000000000000..c2bb5da7b0c61977ba4bf41fabd4adacc4479f44 --- /dev/null +++ b/images/Shaft_02660.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8deae0beba1b2e2d61e010565ba3152f198b0bd7e0073431677467226a0fb80 +size 102848 diff --git a/images/Shaft_02661.png b/images/Shaft_02661.png new file mode 100644 index 0000000000000000000000000000000000000000..78a8fd7759691fe7ace83130e625afe0a142cc70 --- /dev/null +++ b/images/Shaft_02661.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a83daf59b84c380c0e292ff41f2c7b89de12f217bac0a6deadaee798867e63a +size 78922 diff --git a/images/Shaft_02662.png b/images/Shaft_02662.png new file mode 100644 index 0000000000000000000000000000000000000000..b382211f03e8594966f46b99497bc0a94ca5227d --- /dev/null +++ b/images/Shaft_02662.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9727197f03cdd04b2da95f26e38dbba7ee494dd91521047e8c3212f755535205 +size 72450 diff --git a/images/Shaft_02663.png b/images/Shaft_02663.png new file mode 100644 index 0000000000000000000000000000000000000000..c7ad006b611609ecfbd2182afff95b9599dbc177 --- /dev/null +++ b/images/Shaft_02663.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d80db246543c7f66e19fc713cbd3c335173ab18d90371c9743dc00a9e4847455 +size 103485 diff --git a/images/Shaft_02664.png b/images/Shaft_02664.png new file mode 100644 index 0000000000000000000000000000000000000000..934d27f52530ffecc55ba765cc47c11bf691cebc --- /dev/null +++ b/images/Shaft_02664.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e46cdd98c4c21fc6f5d329ed22ad1b75013897d456a46fc6a583d6c7fc1de398 +size 99596 diff --git a/images/Shaft_02665.png b/images/Shaft_02665.png new file mode 100644 index 0000000000000000000000000000000000000000..d8a0e3f8c4415e38c0619ccd32ac6a9fc4475342 --- /dev/null +++ b/images/Shaft_02665.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9734b9332f6185a7b6600993fe5f693a58dd2e51adba93246c9abac6bc3935ad +size 71662 diff --git a/images/Shaft_02666.png b/images/Shaft_02666.png new file mode 100644 index 0000000000000000000000000000000000000000..34b588cddf321959119d72b7501ef788b2efa005 --- /dev/null +++ b/images/Shaft_02666.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aff7d0a2e529dbad29db2832223d8bf29151d5af1fbb706c3909ac5783507ec7 +size 104167 diff --git a/images/Shaft_02667.png b/images/Shaft_02667.png new file mode 100644 index 0000000000000000000000000000000000000000..47fd6b39f4cb48895fbe6a1e1a7b7bed44030298 --- /dev/null +++ b/images/Shaft_02667.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b299cffbc218081f1d5f71e7912d311cf787ebc782ca0fc0705caaa880730f63 +size 77511 diff --git a/images/Shaft_02668.png b/images/Shaft_02668.png new file mode 100644 index 0000000000000000000000000000000000000000..1d7fd67971e604c0db303fe6633b24e38c3e001b --- /dev/null +++ b/images/Shaft_02668.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15324b3b59869bbba0eed0a10743733e1127920a1436f4c411394879b7617cb8 +size 78706 diff --git a/images/Shaft_02669.png b/images/Shaft_02669.png new file mode 100644 index 0000000000000000000000000000000000000000..c8aa233b091775a31b951774bf0dc531469f6139 --- /dev/null +++ b/images/Shaft_02669.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2afa8b72a0ae33be25be3fde4d776588db9a93c5dd2607bcbf7ed92e0c81553 +size 87429 diff --git a/images/Shaft_02670.png b/images/Shaft_02670.png new file mode 100644 index 0000000000000000000000000000000000000000..6efacf67d6f1294da06ffc3dc4b92f804b3c7a94 --- /dev/null +++ b/images/Shaft_02670.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b32b6723342018f8e4fe4d6ce3cbf5353145a4005f137b3dab765c600d68b25e +size 79664 diff --git a/images/Shaft_02671.png b/images/Shaft_02671.png new file mode 100644 index 0000000000000000000000000000000000000000..352dca0bf4001a0eae96db4bf68348137a5deb10 --- /dev/null +++ b/images/Shaft_02671.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abbb4a510d92350b27e534cba3a0872ec13a68ed708a07a5c2a945974c65627f +size 97198 diff --git a/images/Shaft_02672.png b/images/Shaft_02672.png new file mode 100644 index 0000000000000000000000000000000000000000..cf72d7501bae6d57afa54f11aeabf15c11adb0f4 --- /dev/null +++ b/images/Shaft_02672.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc544cedca8293184b461704b5e3c548a319cbbec57eb81bc232c9c0e17a2825 +size 70165 diff --git a/images/Shaft_02673.png b/images/Shaft_02673.png new file mode 100644 index 0000000000000000000000000000000000000000..1b60e1a0f7374b4b8d8f59ace567ca290bdfd741 --- /dev/null +++ b/images/Shaft_02673.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef489d5b6b37acbf5c005b501f53bc36dab682d916232cf2b7ebb2a21675a7fe +size 79133 diff --git a/images/Shaft_02674.png b/images/Shaft_02674.png new file mode 100644 index 0000000000000000000000000000000000000000..85a77526ff294e191c2d30fadb8eddd9ce0a12ae --- /dev/null +++ b/images/Shaft_02674.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f90be45496f5ca7018fe1f5485e056a6a326636c66188202d02d9e68facb6a69 +size 111876 diff --git a/images/Shaft_02675.png b/images/Shaft_02675.png new file mode 100644 index 0000000000000000000000000000000000000000..c48cb703e0d042c9288e17428a20623b7d7cf57b --- /dev/null +++ b/images/Shaft_02675.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f68e56bddec1bdcc9fa3e79b71f83855e3da90fd2152aafb4ab4482d8cd3b4af +size 102312 diff --git a/images/Shaft_02676.png b/images/Shaft_02676.png new file mode 100644 index 0000000000000000000000000000000000000000..ef0f1bddc99061d957e11ffa309bb9cac21079e8 --- /dev/null +++ b/images/Shaft_02676.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b14bc228595f64d3c704f90c1051ec6b4b01553c995f46578ee7ff9c3724ea9 +size 85266 diff --git a/images/Shaft_02677.png b/images/Shaft_02677.png new file mode 100644 index 0000000000000000000000000000000000000000..4bf130e3c1b7dce88d44fa71b62786ffd44b5f4e --- /dev/null +++ b/images/Shaft_02677.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81d21b15ca76da04c9ccce2b5c9a81b562c476e8e0de0c68ae99847d836dac84 +size 83285 diff --git a/images/Shaft_02678.png b/images/Shaft_02678.png new file mode 100644 index 0000000000000000000000000000000000000000..8e4765a3119a38002eee6821e86e7b1b4ef5350c --- /dev/null +++ b/images/Shaft_02678.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee7fb18c506eb559663e3334c8fa1850a7635e57bc4727c0c591623e0b3f6385 +size 100859 diff --git a/images/Shaft_02679.png b/images/Shaft_02679.png new file mode 100644 index 0000000000000000000000000000000000000000..46f96ed1d489db7c3f25fa8aeef0e7827910b8e3 --- /dev/null +++ b/images/Shaft_02679.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:917358550479719ab29c2d3bc27dd950113e22622931295438494cb2619430f3 +size 75363 diff --git a/images/Shaft_02680.png b/images/Shaft_02680.png new file mode 100644 index 0000000000000000000000000000000000000000..afbd0df017e2db5c2a85712f410ccca492f44544 --- /dev/null +++ b/images/Shaft_02680.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:443ff3deac9b377167aee1306c92c0fc661a8ba05015845a640eca94b519e80a +size 99743 diff --git a/images/Shaft_02681.png b/images/Shaft_02681.png new file mode 100644 index 0000000000000000000000000000000000000000..f6bc4f46b09b521a70ffcebf6aa1348e4c5873eb --- /dev/null +++ b/images/Shaft_02681.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ad439c70556ba27f3085fb9f2746ab2688d6e386be1fbcbbb1fd9a5bda6e7b9 +size 110263 diff --git a/images/Shaft_02682.png b/images/Shaft_02682.png new file mode 100644 index 0000000000000000000000000000000000000000..5cd82ea42c43d9a0398f0e1f6b57d6f396119e4d --- /dev/null +++ b/images/Shaft_02682.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92ba4c4476699f161c65adb658c6094feaf64e219869678661155c75c83adef1 +size 87982 diff --git a/images/Shaft_02683.png b/images/Shaft_02683.png new file mode 100644 index 0000000000000000000000000000000000000000..5e919fd3ef4a443ad95cd1cad5aef54430a0d99b --- /dev/null +++ b/images/Shaft_02683.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe3be46d0f5e026add6b2b095a76d7c9ef0339dba1ecb65799c961e64f199a86 +size 97771 diff --git a/images/Shaft_02684.png b/images/Shaft_02684.png new file mode 100644 index 0000000000000000000000000000000000000000..f512fe85c89ff57a6e050ca306f5de7d6945ed9d --- /dev/null +++ b/images/Shaft_02684.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5092bf3d5a91cf8bdbbe612fe51216097aabe58e290a1f5bbe1d317672cfb31f +size 85024 diff --git a/images/Shaft_02685.png b/images/Shaft_02685.png new file mode 100644 index 0000000000000000000000000000000000000000..fd15491ea6d81e016ab0330def0cc98a7cd3ac95 --- /dev/null +++ b/images/Shaft_02685.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c60534068b5bfcb85068656e5cf3895c30c894f711bcfc711deb356043fd105 +size 98713 diff --git a/images/Shaft_02686.png b/images/Shaft_02686.png new file mode 100644 index 0000000000000000000000000000000000000000..1653e4e3aa93804049796e095429e5b66edb03ff --- /dev/null +++ b/images/Shaft_02686.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7471ccc9e5a3b0e38b0b185b1715a985b938777195cd583f926d6ee38e20de2 +size 70966 diff --git a/images/Shaft_02687.png b/images/Shaft_02687.png new file mode 100644 index 0000000000000000000000000000000000000000..d2368a004ceff4335f76e291f5b9907185f36712 --- /dev/null +++ b/images/Shaft_02687.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66882d626d05c9250ba955ec0fe6fbb9b3741924ad9b16252efe362a16fe579e +size 99536 diff --git a/images/Shaft_02688.png b/images/Shaft_02688.png new file mode 100644 index 0000000000000000000000000000000000000000..bb8d0a4e262ccc1db88006236dac0945fc3543c5 --- /dev/null +++ b/images/Shaft_02688.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28d27010f21d8121da73a7034b9210050fa3a781b242ce5c34c9e06f2df682c0 +size 81465 diff --git a/images/Shaft_02689.png b/images/Shaft_02689.png new file mode 100644 index 0000000000000000000000000000000000000000..e500ae50ae69b2254096a8e300783fbffe5b0eef --- /dev/null +++ b/images/Shaft_02689.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:feb927553410420cde04482ab8469012332e346a0f8345c24de463133ace3843 +size 87759 diff --git a/images/Shaft_02690.png b/images/Shaft_02690.png new file mode 100644 index 0000000000000000000000000000000000000000..d9d14911695cb52e5d8d057ed6c252e43e0c5e2b --- /dev/null +++ b/images/Shaft_02690.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ee64e2ba468bd3185803cbcce3985405dcdeacfc12ada28edf4d65a399551e5 +size 116869 diff --git a/images/Shaft_02691.png b/images/Shaft_02691.png new file mode 100644 index 0000000000000000000000000000000000000000..b0bd5ffd43450b1d87b27dec1220b5474adb48c2 --- /dev/null +++ b/images/Shaft_02691.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a72a0f8efaa175b30d1f744cd339f0b4f942e71b6fee77d031ff2d1a08cba363 +size 87338 diff --git a/images/Shaft_02692.png b/images/Shaft_02692.png new file mode 100644 index 0000000000000000000000000000000000000000..5c3ccdc3632418d62ecc9442abe5cc97f1837601 --- /dev/null +++ b/images/Shaft_02692.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d3a85ce55356d59f6b8e178ef0564973f5338df60f21165d0f3123a6f2a9d2e +size 89427 diff --git a/images/Shaft_02693.png b/images/Shaft_02693.png new file mode 100644 index 0000000000000000000000000000000000000000..c843f476167af240f3fc8aed0ac6cc9acaa909fa --- /dev/null +++ b/images/Shaft_02693.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1ccf96af4d2eafbeb61b9971cc6a9443400847bf66922fa41652ebc98e72af8 +size 74077 diff --git a/images/Shaft_02694.png b/images/Shaft_02694.png new file mode 100644 index 0000000000000000000000000000000000000000..bdce55091607f0f16b25b1a11599f48e3b144bba --- /dev/null +++ b/images/Shaft_02694.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19f2707960b9e33305e4469bec5d2bf450e718e3244a0bc63ddf664df7a2568f +size 103282 diff --git a/images/Shaft_02695.png b/images/Shaft_02695.png new file mode 100644 index 0000000000000000000000000000000000000000..e91f4b7384c0f756bc2fc61dd0a0559eedb0e439 --- /dev/null +++ b/images/Shaft_02695.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b918da1c54daa804f0a69aace4da0a98018efbf3d84224765882f418f00cc841 +size 74603 diff --git a/images/Shaft_02696.png b/images/Shaft_02696.png new file mode 100644 index 0000000000000000000000000000000000000000..ebd682f4c0b8693ae41af29250087aac83885d6e --- /dev/null +++ b/images/Shaft_02696.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:698b6c00c00290e3540bcb85cdc689d9e8773c38d26f572f2a7785f1deef0913 +size 73596 diff --git a/images/Shaft_02697.png b/images/Shaft_02697.png new file mode 100644 index 0000000000000000000000000000000000000000..8963bc2b9f4da398d63e2e4a900a6a210c5d5b4c --- /dev/null +++ b/images/Shaft_02697.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae3423c4bd86524e450a5310b41a026e199d1a48214f1d659b9cd4ce43639ee9 +size 95023 diff --git a/images/Shaft_02698.png b/images/Shaft_02698.png new file mode 100644 index 0000000000000000000000000000000000000000..711628d211545ebd6a6f61306c1182a98021318b --- /dev/null +++ b/images/Shaft_02698.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c959bb4ef3807f71725f64581a5393115c91cf435d6691a5cc56e7ff259e4c58 +size 86272 diff --git a/images/Shaft_02699.png b/images/Shaft_02699.png new file mode 100644 index 0000000000000000000000000000000000000000..8d7988dbe543bcf17feaf7f52072a148378579bb --- /dev/null +++ b/images/Shaft_02699.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:79dd06610edda3eb3b57ca373ba3b6cea6808d1409add3877ad5df0c5c8a43cf +size 80821 diff --git a/images/Shaft_02700.png b/images/Shaft_02700.png new file mode 100644 index 0000000000000000000000000000000000000000..e89fa2a8fff5a853b76594e6b147048a0bd6966a --- /dev/null +++ b/images/Shaft_02700.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7bf7f22be18252eb5a0195513072c9d367e50e7af31ba33d439026b2aefa98f +size 74930 diff --git a/images/Shaft_02701.png b/images/Shaft_02701.png new file mode 100644 index 0000000000000000000000000000000000000000..4b0cd7ccc2b863c76a3caa7baa8a0bfd25af5128 --- /dev/null +++ b/images/Shaft_02701.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5d39d41514c236ab95c64c9ad0b0398f8f04328349fd289037f20ac34e2c4ea7 +size 71507 diff --git a/images/Shaft_02702.png b/images/Shaft_02702.png new file mode 100644 index 0000000000000000000000000000000000000000..e16a0f36a3f24c94659c3613027226b68c71c098 --- /dev/null +++ b/images/Shaft_02702.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93a82d3ed87db3b1c23ec2d2d2e4ed2edce8e8819739e0b34a01e0dd3ad1b3b1 +size 107434 diff --git a/images/Shaft_02703.png b/images/Shaft_02703.png new file mode 100644 index 0000000000000000000000000000000000000000..d595e20aae7243bd0a7ad762e95303f223e58397 --- /dev/null +++ b/images/Shaft_02703.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ea0f3869b63d9bd662760d48a7144b63b4edcb3bfb036cc14fedbccffbed026 +size 82753 diff --git a/images/Shaft_02704.png b/images/Shaft_02704.png new file mode 100644 index 0000000000000000000000000000000000000000..9622a9ea20408dae08c6519140a9dde32fd230c6 --- /dev/null +++ b/images/Shaft_02704.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46365c3463de8f4c4c55ad58130819f03728574a7af282652d93f68710ea5327 +size 83582 diff --git a/images/Shaft_02705.png b/images/Shaft_02705.png new file mode 100644 index 0000000000000000000000000000000000000000..bb068c3d54fda3e8e0d51f67606853718b3cf9ad --- /dev/null +++ b/images/Shaft_02705.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92540369bc2fd730cdf1ca6c8f15f7bd5e90ef383fb0904f9d6a8fbd9d8cf20f +size 73077 diff --git a/images/Shaft_02706.png b/images/Shaft_02706.png new file mode 100644 index 0000000000000000000000000000000000000000..86e07e278c5991d8dd94ce9d92027002f920d2d4 --- /dev/null +++ b/images/Shaft_02706.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4833ed8b274d46c142157200e41d6b11d9fa4f8fc393f4e6b28552e37d1dc91f +size 71868 diff --git a/images/Shaft_02707.png b/images/Shaft_02707.png new file mode 100644 index 0000000000000000000000000000000000000000..c6a4c572b77d1fb9edf97bfb1e6dd50acb79d681 --- /dev/null +++ b/images/Shaft_02707.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e56a6370c054bd848dd912c92d5bcc1eee6b9d3e64bc7e74e3f170c0bbb17c7 +size 84625 diff --git a/images/Shaft_02708.png b/images/Shaft_02708.png new file mode 100644 index 0000000000000000000000000000000000000000..c86f371ef320adad37ba44cb99aa91ce14c1d97b --- /dev/null +++ b/images/Shaft_02708.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc7055c522d99aec0532fd11446a0e33cffcca01b3880030196a76d03453c083 +size 121165 diff --git a/images/Shaft_02709.png b/images/Shaft_02709.png new file mode 100644 index 0000000000000000000000000000000000000000..5284e1d385be6a08c9088b5ecd95a63eeae4c1af --- /dev/null +++ b/images/Shaft_02709.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:959e99bc182e11044ae8fd0cb299442d59df185b24f98bd5b33cb6207b01ff92 +size 109224 diff --git a/images/Shaft_02710.png b/images/Shaft_02710.png new file mode 100644 index 0000000000000000000000000000000000000000..f57095b57c1b6f9f1399119eda4bc6df5ee45928 --- /dev/null +++ b/images/Shaft_02710.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6f5b918b478b92b743a2868d7272ea3ec3cecd21637368bc44d57ed7f1db894 +size 85375 diff --git a/images/Shaft_02711.png b/images/Shaft_02711.png new file mode 100644 index 0000000000000000000000000000000000000000..da07247f10770412025f7cf023ffa7032b8b07ee --- /dev/null +++ b/images/Shaft_02711.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68774cfe031a7fdc6364eae35e2211c40f0037f989f8edac3b0db50061bf630e +size 108928 diff --git a/images/Shaft_02712.png b/images/Shaft_02712.png new file mode 100644 index 0000000000000000000000000000000000000000..80fc79b8a3929042f2de74393788f21c9a370197 --- /dev/null +++ b/images/Shaft_02712.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6ebb798dfa8d49db88b6eac6c5a1ff4453354f141121ed6d1e374df20ae0f5f +size 101573 diff --git a/images/Shaft_02713.png b/images/Shaft_02713.png new file mode 100644 index 0000000000000000000000000000000000000000..4988269b9a902fb21abe68948ca85a3393bfd608 --- /dev/null +++ b/images/Shaft_02713.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee89a87d37fa3405b79f9b49727fa3bf5a2b1b6061f31896dff324f95413f165 +size 91620 diff --git a/images/Shaft_02714.png b/images/Shaft_02714.png new file mode 100644 index 0000000000000000000000000000000000000000..b4e9e4cef7cb586351b34b194b662642317c30e6 --- /dev/null +++ b/images/Shaft_02714.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e14ebe84995c6af8a701231b89cd05d3328ba7dd9f48a57960064a85e91f3065 +size 85375 diff --git a/images/Shaft_02715.png b/images/Shaft_02715.png new file mode 100644 index 0000000000000000000000000000000000000000..2f18e6083e7a7d3fb8c0b79fcaf9e2f0aa81d8d9 --- /dev/null +++ b/images/Shaft_02715.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:654ad85eeb2d2a49a2767ab406ec504c7f747a0d696b078151267fb5afc37790 +size 80548 diff --git a/images/Shaft_02716.png b/images/Shaft_02716.png new file mode 100644 index 0000000000000000000000000000000000000000..5151aa8f9e3483ca1ba06f76edf8966b83019b15 --- /dev/null +++ b/images/Shaft_02716.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c37d3f58c5fd3d0360fcd55012260aa4d7eeef217f787437278845a0f1bdd97 +size 81187 diff --git a/images/Shaft_02717.png b/images/Shaft_02717.png new file mode 100644 index 0000000000000000000000000000000000000000..b1fb8b427f1f170cf56028d6dba55dcf02e5d55a --- /dev/null +++ b/images/Shaft_02717.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bddf2e77ed5e8a9bfde4c3059092cc99933de428d7fd1174d678b59dad069729 +size 84357 diff --git a/images/Shaft_02718.png b/images/Shaft_02718.png new file mode 100644 index 0000000000000000000000000000000000000000..eae1c531a94ebe3e023003d68436c4ca0ef7d6c5 --- /dev/null +++ b/images/Shaft_02718.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e593efa525be43717239e9e19f55c1f0583fd8ca863cc2de55637eeea4da3432 +size 78344 diff --git a/images/Shaft_02719.png b/images/Shaft_02719.png new file mode 100644 index 0000000000000000000000000000000000000000..af4ca618909f63ce3f6e8ee00cf2be567286d7bd --- /dev/null +++ b/images/Shaft_02719.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76063b9d46b02ed53a431b888e7031c340d6964eac0cfcadb688958eeb45236e +size 73206 diff --git a/images/Shaft_02720.png b/images/Shaft_02720.png new file mode 100644 index 0000000000000000000000000000000000000000..a942564bb3f8b06549e4e76575d1b59fd1e74afd --- /dev/null +++ b/images/Shaft_02720.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1a00cca0a7791f000f07bd54c5405579311262cd401e3689830b5dbb423dbb6 +size 77305 diff --git a/images/Shaft_02721.png b/images/Shaft_02721.png new file mode 100644 index 0000000000000000000000000000000000000000..593d29a3d2ef795c25352d97e29c5721d94ef9f2 --- /dev/null +++ b/images/Shaft_02721.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:005aef9c4b279b53a99b7b861be9a0e957169dacff013f7fd97c632cfa9a218d +size 90324 diff --git a/images/Shaft_02722.png b/images/Shaft_02722.png new file mode 100644 index 0000000000000000000000000000000000000000..f7cc88b364836f3601c925dab4dc31eed1d927d4 --- /dev/null +++ b/images/Shaft_02722.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9144a807bd8d9a53d2b6b5d484c484ee49c9ea689dba904e12a88b60d2799041 +size 72068 diff --git a/images/Shaft_02723.png b/images/Shaft_02723.png new file mode 100644 index 0000000000000000000000000000000000000000..181945e4433e586ddd32fa32e4c57ae09cbab8db --- /dev/null +++ b/images/Shaft_02723.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1524fd45a2376873be906f6703537929835064a6037d07f1e47c7a9547bc6b51 +size 86165 diff --git a/images/Shaft_02724.png b/images/Shaft_02724.png new file mode 100644 index 0000000000000000000000000000000000000000..9966fef027a4fecd17baf735b4265aa38c180fc2 --- /dev/null +++ b/images/Shaft_02724.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95dcb4de27e3c101f6cfc3d4f8efc20c81fed0fadc21773ad41b331799644567 +size 69069 diff --git a/images/Shaft_02725.png b/images/Shaft_02725.png new file mode 100644 index 0000000000000000000000000000000000000000..f286572e4ad5a7e22df0f92bda4dfe5cb92a5f19 --- /dev/null +++ b/images/Shaft_02725.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63688fdf4b30905457b50d2984499fbabb1abb33bc0b026517fd818873e6ff19 +size 72948 diff --git a/images/Shaft_02726.png b/images/Shaft_02726.png new file mode 100644 index 0000000000000000000000000000000000000000..ac943a7af65a813718ea25b5c52691e3421b9445 --- /dev/null +++ b/images/Shaft_02726.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:007f1495cf5122d31d68a1fb0db54b9b338aa0cf87dd5583357ec69350f122b9 +size 90468 diff --git a/images/Shaft_02727.png b/images/Shaft_02727.png new file mode 100644 index 0000000000000000000000000000000000000000..8eeb6d4872550fecb08b922ae00ffe10b4706705 --- /dev/null +++ b/images/Shaft_02727.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6dc2ae309de545321e590404643534c1b7249805d2a001cdbdae7978c8b8ef3 +size 90933 diff --git a/images/Shaft_02728.png b/images/Shaft_02728.png new file mode 100644 index 0000000000000000000000000000000000000000..0fe4f278d17b01691c336df3f39807b1ecc4d4d5 --- /dev/null +++ b/images/Shaft_02728.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e186f5c7b6aa0a11c29c8e229758afd2d2934cfaf272311893e2646f5beccf9 +size 125211 diff --git a/images/Shaft_02729.png b/images/Shaft_02729.png new file mode 100644 index 0000000000000000000000000000000000000000..8017a2245939e0e694aa6a5cc3ad4434943f2098 --- /dev/null +++ b/images/Shaft_02729.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9183fabb6c190e01959720d063402fe7c0f5a0b2ec14fd290ee7865479e5ba7 +size 90637 diff --git a/images/Shaft_02730.png b/images/Shaft_02730.png new file mode 100644 index 0000000000000000000000000000000000000000..0b75465fa922aecb60edc760a1fe48a1b009510f --- /dev/null +++ b/images/Shaft_02730.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ccbacee8c3a071c835e2edc3051b2f7928f20a868814941a7ad1bc8da978d85 +size 78161 diff --git a/images/Shaft_02731.png b/images/Shaft_02731.png new file mode 100644 index 0000000000000000000000000000000000000000..8121e00572ebaa0dfd0751e2e4c3a73d32e808e5 --- /dev/null +++ b/images/Shaft_02731.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26ee8be6951f8a206a06f0a935de2d4bcf17523f97d5b25c45e2e6929ba08d74 +size 86794 diff --git a/images/Shaft_02732.png b/images/Shaft_02732.png new file mode 100644 index 0000000000000000000000000000000000000000..26b5c63aca2e8e2290f38233c40ca6c6087b85f9 --- /dev/null +++ b/images/Shaft_02732.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef306bd1b5861fe8d4d230c5ecf1a1988a2db6632f659fd53baa8256a2e8559 +size 80527 diff --git a/images/Shaft_02733.png b/images/Shaft_02733.png new file mode 100644 index 0000000000000000000000000000000000000000..35f8d362c7b1c7c448743cb56adae7a4542853f4 --- /dev/null +++ b/images/Shaft_02733.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59f180438bfcaba143e635e8c704d0dfbd63a685464d5095e5952aa341046e60 +size 80089 diff --git a/images/Shaft_02734.png b/images/Shaft_02734.png new file mode 100644 index 0000000000000000000000000000000000000000..e7ae04db4e33b36ba975db71f00d78a85c21bd86 --- /dev/null +++ b/images/Shaft_02734.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:809510e8227e23addcd87386d4c1fd8f20973ad16dd02b5f3e3411798e0d72dc +size 72952 diff --git a/images/Shaft_02735.png b/images/Shaft_02735.png new file mode 100644 index 0000000000000000000000000000000000000000..66462d8232d54efe9e063c4dafcd326d83d6994c --- /dev/null +++ b/images/Shaft_02735.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6112aad0b42ee446be36cfc1b47ac986acba844044ee72d247f0d9c91a23169a +size 98122 diff --git a/images/Shaft_02736.png b/images/Shaft_02736.png new file mode 100644 index 0000000000000000000000000000000000000000..9222ba1657907875953fd9ef19ddc36695f61d88 --- /dev/null +++ b/images/Shaft_02736.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca8805ad83b5f5ef13c763e0840b7af7eb319fb3a3523eb0a613bdeeb0dbe19f +size 81201 diff --git a/images/Shaft_02737.png b/images/Shaft_02737.png new file mode 100644 index 0000000000000000000000000000000000000000..636452e53567df5b29bf5e8a45b8e30c91b5070d --- /dev/null +++ b/images/Shaft_02737.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8d48e97f291f9419f0ea5ec9c4a856485e3b1a828f4ea6cdef48cb153208187 +size 68950 diff --git a/images/Shaft_02738.png b/images/Shaft_02738.png new file mode 100644 index 0000000000000000000000000000000000000000..4a81cb970d43a1a4e227268afcaf91fb5ec18edb --- /dev/null +++ b/images/Shaft_02738.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d16a315a0e4d6da5ac9138787b6772c8b5a75022b2bfbbcb577b20e3f9163c0 +size 91973 diff --git a/images/Shaft_02739.png b/images/Shaft_02739.png new file mode 100644 index 0000000000000000000000000000000000000000..7bdda42bf5267e5e1c8b70074c34bbea99456615 --- /dev/null +++ b/images/Shaft_02739.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:543c40d5cb0d991e242d436829b4adee317ad658fdfaaf822ef18a59a8b62bbb +size 87232 diff --git a/images/Shaft_02740.png b/images/Shaft_02740.png new file mode 100644 index 0000000000000000000000000000000000000000..8fdd91fc0dfa24e0a591cb5dd2ba967dfa92f462 --- /dev/null +++ b/images/Shaft_02740.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07be3178152762d3e0d7233c99193c04929b17aff7d4a4f6048784926477cc72 +size 75909 diff --git a/images/Shaft_02741.png b/images/Shaft_02741.png new file mode 100644 index 0000000000000000000000000000000000000000..b008562258b38fb41c7992b38147dc5c3903b302 --- /dev/null +++ b/images/Shaft_02741.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32b670fc898f6dcf080bba446612448a45303009a047355e3ccf97305d6001f4 +size 93925 diff --git a/images/Shaft_02742.png b/images/Shaft_02742.png new file mode 100644 index 0000000000000000000000000000000000000000..0b41801722197a50a72b511c0fb2fd87afa91236 --- /dev/null +++ b/images/Shaft_02742.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b298e184bee8ccbdd6fc833909f10277a650ea80bf70543ae52363129fb33cc6 +size 86670 diff --git a/images/Shaft_02743.png b/images/Shaft_02743.png new file mode 100644 index 0000000000000000000000000000000000000000..d785a4385b75b4bb188383bcfcf24903ab52c0a5 --- /dev/null +++ b/images/Shaft_02743.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67c4a2024480f77a5490504b1d5a17574ca11d937a7be21e3f7d2436bb5e416c +size 69645 diff --git a/images/Shaft_02744.png b/images/Shaft_02744.png new file mode 100644 index 0000000000000000000000000000000000000000..6b15ba6728648ef9e97cb885d913758dc370ad4f --- /dev/null +++ b/images/Shaft_02744.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd0ba5fdf112f8b020f1712db5b0a837435236268e44e36a6ce17e1acff82937 +size 71156 diff --git a/images/Shaft_02745.png b/images/Shaft_02745.png new file mode 100644 index 0000000000000000000000000000000000000000..4810db608784e8f299eb858da7a90828364f8f64 --- /dev/null +++ b/images/Shaft_02745.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69ee3470d9144f0aa50a39ce21bd51d24da62bbef8ae86658bb8a17331bf52f3 +size 79925 diff --git a/images/Shaft_02746.png b/images/Shaft_02746.png new file mode 100644 index 0000000000000000000000000000000000000000..65cd088b94e5b760b7a964a87d87869c198a251a --- /dev/null +++ b/images/Shaft_02746.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f036245294f6e35ab359a7d26cb4c20fc04e2eabd2e000f9628d51b806e295f2 +size 103032 diff --git a/images/Shaft_02747.png b/images/Shaft_02747.png new file mode 100644 index 0000000000000000000000000000000000000000..538e72e82d42b17e66defca956e5b1d5f34a4cbb --- /dev/null +++ b/images/Shaft_02747.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5bfa9ce671d901ddb2c83be83b174ec11afad70eca8aa65e07fdb60366d2a710 +size 73006 diff --git a/images/Shaft_02748.png b/images/Shaft_02748.png new file mode 100644 index 0000000000000000000000000000000000000000..659c11a5ca46cde8cc5b9a64faa7be40ef294934 --- /dev/null +++ b/images/Shaft_02748.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3119a3e97ffd614575222ceff43268d7232385e5c71be30870c5d971d502bb3b +size 69934 diff --git a/images/Shaft_02749.png b/images/Shaft_02749.png new file mode 100644 index 0000000000000000000000000000000000000000..1e9e48bd84c4204551ecc085842d4d616df6f93f --- /dev/null +++ b/images/Shaft_02749.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bdab797db5673f6505d7266235444ec3bc1ee081e8bd27d6a35f4c04f0013d3 +size 92837 diff --git a/images/Shaft_02750.png b/images/Shaft_02750.png new file mode 100644 index 0000000000000000000000000000000000000000..7d9ba3fa69a8f67241494999592b7a40159ca757 --- /dev/null +++ b/images/Shaft_02750.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1b4fd6c9e0938ea1146681fa04e0b51d381ff9ccda35bc1aed325544156d883 +size 68269 diff --git a/images/Shaft_02751.png b/images/Shaft_02751.png new file mode 100644 index 0000000000000000000000000000000000000000..4697b38908019ba2b076ebcbeb2a71eb90e0e2a2 --- /dev/null +++ b/images/Shaft_02751.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a37daf3a105d7e6a77ed51a787dd4496b5fe91c97b0f734d2a32dd012f004f25 +size 71131 diff --git a/images/Shaft_02752.png b/images/Shaft_02752.png new file mode 100644 index 0000000000000000000000000000000000000000..2c7e40bd4ff869e3b96fe93b36f1170f71c638ec --- /dev/null +++ b/images/Shaft_02752.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80c56ebb833f9290b9f69df474ae1ba643cc4e96c1e1615a1048ce3b41d3ac8c +size 73406 diff --git a/images/Shaft_02753.png b/images/Shaft_02753.png new file mode 100644 index 0000000000000000000000000000000000000000..ab0b144324cfef77bc3209280aa2d31f4331b352 --- /dev/null +++ b/images/Shaft_02753.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b99bfca650b8aa497a5cecc6f9868f37b5c4a74a468e009c07a349afbb5f9180 +size 72559 diff --git a/images/Shaft_02754.png b/images/Shaft_02754.png new file mode 100644 index 0000000000000000000000000000000000000000..cfd57a9f0b1ca1c53adc701ed7f08b32c0731712 --- /dev/null +++ b/images/Shaft_02754.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e0e73cb95ec687fe443e102cebbc6db31d24c388713f88cdf6179c56ab67ec3 +size 107131 diff --git a/images/Shaft_02755.png b/images/Shaft_02755.png new file mode 100644 index 0000000000000000000000000000000000000000..e62013cc6d020d81689b1520ceeb75b049453ae2 --- /dev/null +++ b/images/Shaft_02755.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81c95bd6dc7340a31e8512cc82e9945107577697607e1ebfa633f76770ee14ff +size 73261 diff --git a/images/Shaft_02756.png b/images/Shaft_02756.png new file mode 100644 index 0000000000000000000000000000000000000000..aa3f05c6814ab7b4122f0185f74ab5623d09d496 --- /dev/null +++ b/images/Shaft_02756.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e87dc7fa78b18f385592c819d1f3591a326d28af8e679de8a19dc49903d95e98 +size 102993 diff --git a/images/Shaft_02757.png b/images/Shaft_02757.png new file mode 100644 index 0000000000000000000000000000000000000000..7295defbb478aba1c1a4d425d75054b59aec5211 --- /dev/null +++ b/images/Shaft_02757.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93324b8a571fe752f2f005fa15544440e3b05d7e7602d8e01ab650ee79a6cc04 +size 78726 diff --git a/images/Shaft_02758.png b/images/Shaft_02758.png new file mode 100644 index 0000000000000000000000000000000000000000..75ec355af545e401868ec8e67d6501ce98bfa48c --- /dev/null +++ b/images/Shaft_02758.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98f9b61f80c0d05d2619887ec71d1347fc4f6cc741c60860e6d81df220d90a56 +size 71013 diff --git a/images/Shaft_02759.png b/images/Shaft_02759.png new file mode 100644 index 0000000000000000000000000000000000000000..1859dfd731495c4498a03fda455c0b811a22a173 --- /dev/null +++ b/images/Shaft_02759.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1db5ada7a6ad4ff2e29154bf2c1a9b707f7f3383fb4ea486f9ab3380541c48eb +size 79058 diff --git a/images/Shaft_02760.png b/images/Shaft_02760.png new file mode 100644 index 0000000000000000000000000000000000000000..2536740e4e38975b250a1e08b8e710c02658d564 --- /dev/null +++ b/images/Shaft_02760.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdb430df615dd854afe6a9f6f8a02a83690350593e4784d506fa49cc77bb64a0 +size 94038 diff --git a/images/Shaft_02761.png b/images/Shaft_02761.png new file mode 100644 index 0000000000000000000000000000000000000000..dde4fdef2035dce3606ad9d5fe7de1509186d5eb --- /dev/null +++ b/images/Shaft_02761.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1f0b025e0ab010427a8ed974fe4cabd9b0d1ca78c240cb4ab17a60370b0600d +size 71266 diff --git a/images/Shaft_02762.png b/images/Shaft_02762.png new file mode 100644 index 0000000000000000000000000000000000000000..0a5ba4322d8fd220c2b47cd615a5a65f3888ab59 --- /dev/null +++ b/images/Shaft_02762.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24eea78c6f1633f602fc73c1921bfb9f109e4929b6a43dd5179e8d60fab0ecb1 +size 101573 diff --git a/images/Shaft_02763.png b/images/Shaft_02763.png new file mode 100644 index 0000000000000000000000000000000000000000..4ea2cd7b2e5fd673d4c531e57dee06a447542759 --- /dev/null +++ b/images/Shaft_02763.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64b04cea03f9c49de37e02043585876e46615c49ea8b6e4983b2d98f09849474 +size 103363 diff --git a/images/Shaft_02764.png b/images/Shaft_02764.png new file mode 100644 index 0000000000000000000000000000000000000000..20a8b1086feeb331aa3b50fd09fc44fbafaf569f --- /dev/null +++ b/images/Shaft_02764.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6db74360621349d744fd4c3c00a9b38857e7cb7247704face0aafadc85084ced +size 78148 diff --git a/images/Shaft_02765.png b/images/Shaft_02765.png new file mode 100644 index 0000000000000000000000000000000000000000..284abba9d4383ae5e8194cd3cdf419c951209ce2 --- /dev/null +++ b/images/Shaft_02765.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:345c30b0c90138114c9b85ad480d5f37f2170698f769bc32d76526c522d02610 +size 77862 diff --git a/images/Shaft_02766.png b/images/Shaft_02766.png new file mode 100644 index 0000000000000000000000000000000000000000..18b9dbc4553ff03c8a8677f6f66501e98e6bc92a --- /dev/null +++ b/images/Shaft_02766.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e2ee6f371315f0a769c6f255ab434ba4408fc3cd5edb58e147b0f77ba5f4aa4 +size 100912 diff --git a/images/Shaft_02767.png b/images/Shaft_02767.png new file mode 100644 index 0000000000000000000000000000000000000000..33905be21e459d42ac7cd8a471370b66c33ea65c --- /dev/null +++ b/images/Shaft_02767.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:391317c4a8dcdc7bc36da279e39fa1b681ba28944ad446050b183f41d73024d7 +size 102344 diff --git a/images/Shaft_02768.png b/images/Shaft_02768.png new file mode 100644 index 0000000000000000000000000000000000000000..864dd55b939207b1a02bc87145aea2b1924af976 --- /dev/null +++ b/images/Shaft_02768.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e75f01648a52a0fd58f20ec2bfa545a3ab8281f07524f2161df4a3054a622733 +size 94186 diff --git a/images/Shaft_02769.png b/images/Shaft_02769.png new file mode 100644 index 0000000000000000000000000000000000000000..fdb12948204eff30e3fc60790eefc98c67727897 --- /dev/null +++ b/images/Shaft_02769.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1473aca077a9d17defe5510a3c6b34e79de830f47a6b406eb338f969a9058640 +size 75164 diff --git a/images/Shaft_02770.png b/images/Shaft_02770.png new file mode 100644 index 0000000000000000000000000000000000000000..b13e8d97f7d3565602fa4bb7403c38896445f124 --- /dev/null +++ b/images/Shaft_02770.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21c512a2cb29144eb8a98b759dc5756066dd51600115ba01edb9a0254c68e80a +size 72746 diff --git a/images/Shaft_02771.png b/images/Shaft_02771.png new file mode 100644 index 0000000000000000000000000000000000000000..a8deca6e18daaf4679d029ab1bda1ee6b6fec902 --- /dev/null +++ b/images/Shaft_02771.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a134465ad6da0c2803c213128fd94c60ed1c62a04e99ff216cdf4a12dd6cd0e +size 89922 diff --git a/images/Shaft_02772.png b/images/Shaft_02772.png new file mode 100644 index 0000000000000000000000000000000000000000..7092cbcc94cccd8427e71fbb8e83e7bd3a783bb3 --- /dev/null +++ b/images/Shaft_02772.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b66ba346d0809ec499bc304fb6e72ef6c683fd8f10556dc1a1cbf82e722cd0e +size 104423 diff --git a/images/Shaft_02773.png b/images/Shaft_02773.png new file mode 100644 index 0000000000000000000000000000000000000000..57ab821a2036e31267dcf617f6a901f5dad1d338 --- /dev/null +++ b/images/Shaft_02773.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69c1b29d97ea8abe93ddc4751b4ba991de80343bceaac42a6d10a72247d6e8ca +size 83809 diff --git a/images/Shaft_02774.png b/images/Shaft_02774.png new file mode 100644 index 0000000000000000000000000000000000000000..78dd39d7bc6def98b689abf7d66c806313704325 --- /dev/null +++ b/images/Shaft_02774.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:187afebfb094fcd83d859719610deb0bade90b21ad1cc4869193b6d967360b0d +size 70332 diff --git a/images/Shaft_02775.png b/images/Shaft_02775.png new file mode 100644 index 0000000000000000000000000000000000000000..3c19cb9010b8b1bfc988a171eccca64b0ab67aa1 --- /dev/null +++ b/images/Shaft_02775.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:591e12140185fdeeeb35498aa1a2191113059ae9fa794b2a85070d7b11d3d606 +size 94858 diff --git a/images/Shaft_02776.png b/images/Shaft_02776.png new file mode 100644 index 0000000000000000000000000000000000000000..4a42665ea98cebbf958cef8c02482f067440e766 --- /dev/null +++ b/images/Shaft_02776.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ace554dd8de8501b22f41432dec7ffd95ff48a79d50b62fb29eab28074c75b2 +size 76160 diff --git a/images/Shaft_02777.png b/images/Shaft_02777.png new file mode 100644 index 0000000000000000000000000000000000000000..e2edf55b465fc7f6050b47f7f35b98f2e469d7c9 --- /dev/null +++ b/images/Shaft_02777.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd1527d9b8bdc5cb4199051ec0ab5f89bab8a41b1652c4d594185bb2226e7208 +size 72021 diff --git a/images/Shaft_02778.png b/images/Shaft_02778.png new file mode 100644 index 0000000000000000000000000000000000000000..2d0e43ccdfd7497d3e9b4fa6340baa576afdf774 --- /dev/null +++ b/images/Shaft_02778.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf65e248739087e707d1956097839788f4cd18cce95317f1ce0e6bb07a9c23b6 +size 97630 diff --git a/images/Shaft_02779.png b/images/Shaft_02779.png new file mode 100644 index 0000000000000000000000000000000000000000..bf7fadcfe28f6f39147d2dd667058a57699fa18b --- /dev/null +++ b/images/Shaft_02779.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb409b6dfeb61045cb222d21dea39c5bd7f4607b87f1dd93c70fd0bc467a68b5 +size 72754 diff --git a/images/Shaft_02780.png b/images/Shaft_02780.png new file mode 100644 index 0000000000000000000000000000000000000000..319eb4ed04cb97c348d8f260d68329270760e42d --- /dev/null +++ b/images/Shaft_02780.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:448ae6d222168516f09b71f70268bc965602ff739350cc617af2a3e335098aa1 +size 77875 diff --git a/images/Shaft_02781.png b/images/Shaft_02781.png new file mode 100644 index 0000000000000000000000000000000000000000..74d07ba5e06dbabe3505e2a0dabad6d09bad02dd --- /dev/null +++ b/images/Shaft_02781.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a28cb0e04c28f25acbca78a2aa6029388ef207157b833a318bb78ff338697e8d +size 86290 diff --git a/images/Shaft_02782.png b/images/Shaft_02782.png new file mode 100644 index 0000000000000000000000000000000000000000..cd7906d5df70a0d4ba2a87a0ad8c2aee35a473db --- /dev/null +++ b/images/Shaft_02782.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0369cf24a6696d95067e56d12d42b348403815367e0d9a863d85f30aa098f518 +size 96937 diff --git a/images/Shaft_02783.png b/images/Shaft_02783.png new file mode 100644 index 0000000000000000000000000000000000000000..4cbcd7c7f92855a259a16c76b309dbbed9b8738b --- /dev/null +++ b/images/Shaft_02783.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b08938826b549f3c5322233d893c2c91e21194334ed7b4005b6be8b80422c1b5 +size 80858 diff --git a/images/Shaft_02784.png b/images/Shaft_02784.png new file mode 100644 index 0000000000000000000000000000000000000000..142e4abd15d3cae899759c0511195d99538a6176 --- /dev/null +++ b/images/Shaft_02784.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc62dbb6555d544e7120c57b8fdd1104b519b3e36c3288f4abcff442f30da7cf +size 70527 diff --git a/images/Shaft_02785.png b/images/Shaft_02785.png new file mode 100644 index 0000000000000000000000000000000000000000..3076de7084a83b79ee280c820bb4d551ef9d525c --- /dev/null +++ b/images/Shaft_02785.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4973e540bbed4caa7c94b139077abc1e51440584c30e07615551d33266da9ce1 +size 92123 diff --git a/images/Shaft_02786.png b/images/Shaft_02786.png new file mode 100644 index 0000000000000000000000000000000000000000..2d723e4a8000a6ded75f7b224edb6c55aea7bce4 --- /dev/null +++ b/images/Shaft_02786.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90c99166cf74a53b42889fe3247bd8d193fe0325161fb44008c5a411f22eebbb +size 72124 diff --git a/images/Shaft_02787.png b/images/Shaft_02787.png new file mode 100644 index 0000000000000000000000000000000000000000..fa272e9e227434e3fdd625807e1f5c6791390763 --- /dev/null +++ b/images/Shaft_02787.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1805c98f409162ddcdf956e5c34a60a2472110c48a79914db5d75ea14ed64702 +size 73217 diff --git a/images/Shaft_02788.png b/images/Shaft_02788.png new file mode 100644 index 0000000000000000000000000000000000000000..f052ff04b1de0442f06df9468269c96628034563 --- /dev/null +++ b/images/Shaft_02788.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b87419163da3f6febd9b7738431a5d78bf135a1f156d3acc38e62d0b07a64dd7 +size 78137 diff --git a/images/Shaft_02789.png b/images/Shaft_02789.png new file mode 100644 index 0000000000000000000000000000000000000000..cdd3be6442ffae52142cfbd1ff0c90d01f6f1dc9 --- /dev/null +++ b/images/Shaft_02789.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:637a8fdb28329e6c0bd0267c221ad20978921f46a51e7a833580ffb6701d2996 +size 70298 diff --git a/images/Shaft_02790.png b/images/Shaft_02790.png new file mode 100644 index 0000000000000000000000000000000000000000..0d7aba951cd99d0287895b9cd65147e58d99c15a --- /dev/null +++ b/images/Shaft_02790.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca5719ae684deaacf866b17cca4bdafdb259ede7fd538aa4a989da963cf4c776 +size 69431 diff --git a/images/Shaft_02791.png b/images/Shaft_02791.png new file mode 100644 index 0000000000000000000000000000000000000000..a68df53203d5859d54f1b4fc19910e16078904f3 --- /dev/null +++ b/images/Shaft_02791.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1bf125d7edeb49ea40568e72027db2eadd9b1f7e327c4fe17c6e4acffc8e0d6 +size 82542 diff --git a/images/Shaft_02792.png b/images/Shaft_02792.png new file mode 100644 index 0000000000000000000000000000000000000000..a9f53f2a2405f52e46367725127b9c51d8c4e4e8 --- /dev/null +++ b/images/Shaft_02792.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1ba2efad3a8e0e7303afef754def794156f7695efb68dda1cc4389534ce70c0 +size 103200 diff --git a/images/Shaft_02793.png b/images/Shaft_02793.png new file mode 100644 index 0000000000000000000000000000000000000000..ba05bad5386a59f2a1aa6bc7656a67a5222bd819 --- /dev/null +++ b/images/Shaft_02793.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a58fd08eb7b25c6edef54567d7f91c86eaadd45813394cd2563a3d7c11a7973 +size 82351 diff --git a/images/Shaft_02794.png b/images/Shaft_02794.png new file mode 100644 index 0000000000000000000000000000000000000000..9159d9a6f910bb330ba6a969c64e39624fb6ff64 --- /dev/null +++ b/images/Shaft_02794.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28fc45f56f1729c75940d042017ed51e45011159e9d2ce0399019300451c0a64 +size 85555 diff --git a/images/Shaft_02795.png b/images/Shaft_02795.png new file mode 100644 index 0000000000000000000000000000000000000000..34ac4debfa9a4e8582fea84d6f25cd2b431e643f --- /dev/null +++ b/images/Shaft_02795.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7ae7a57ae69a24cef67f184043a9415cfa6239a5a25c9dbac9d933679dca92e +size 75424 diff --git a/images/Shaft_02796.png b/images/Shaft_02796.png new file mode 100644 index 0000000000000000000000000000000000000000..cffcaa61fd8dd7423a12eada691ff1331507c0c0 --- /dev/null +++ b/images/Shaft_02796.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a88062a852222e075cd1b5dd8f77be5d153bd8c189f6f56a44a2fd325e7dea94 +size 71215 diff --git a/images/Shaft_02797.png b/images/Shaft_02797.png new file mode 100644 index 0000000000000000000000000000000000000000..97aea652d330910d13d5e23cb99d580b60622804 --- /dev/null +++ b/images/Shaft_02797.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee2aaf5e2a3761770aaa9fe3ef2a04cc2ba5ebe6531d696ad7744bdec69691d7 +size 100224 diff --git a/images/Shaft_02798.png b/images/Shaft_02798.png new file mode 100644 index 0000000000000000000000000000000000000000..989d127c4433bcc5de4f8e6e081febf7ea9b323c --- /dev/null +++ b/images/Shaft_02798.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66bc6a9c3b10276d7401dae2902bb3750df660aa598c413713041094a02a3dd7 +size 84068 diff --git a/images/Shaft_02799.png b/images/Shaft_02799.png new file mode 100644 index 0000000000000000000000000000000000000000..1ee5a88f2811e8321824f8d2b678a6bb1e4f317c --- /dev/null +++ b/images/Shaft_02799.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b796f615a4a7a328d3accfa1ca991a099cee68e6003f484eabce051c5629f511 +size 70426 diff --git a/images/Shaft_02800.png b/images/Shaft_02800.png new file mode 100644 index 0000000000000000000000000000000000000000..f1b149ccaf1afdfeac11d208c624948e550b06ad --- /dev/null +++ b/images/Shaft_02800.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5cc35577cd56e7148324b86d248ce24eb96a25db3f573b2182390c79b91fba2 +size 82868 diff --git a/images/Shaft_02801.png b/images/Shaft_02801.png new file mode 100644 index 0000000000000000000000000000000000000000..66ab27f6600a7dbf3a134e534d4dd8ed91dfc7ce --- /dev/null +++ b/images/Shaft_02801.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3298fe80117cf74d3bf04c928015d0c928b5c2620d29d582770213239e039372 +size 101274 diff --git a/images/Shaft_02802.png b/images/Shaft_02802.png new file mode 100644 index 0000000000000000000000000000000000000000..e2911b6fcfec592eb604690bb41d9a361ed30cec --- /dev/null +++ b/images/Shaft_02802.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35c634d0401e608f705a92f9f0896d2e47a78e6dd89088b2e0de806202967338 +size 111286 diff --git a/images/Shaft_02803.png b/images/Shaft_02803.png new file mode 100644 index 0000000000000000000000000000000000000000..397b5bed2e0f442bfa3ff709444a5e6d0b172787 --- /dev/null +++ b/images/Shaft_02803.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4aaad680632efb5d2a65b5810819ddda4c97a018dc8e42119d066ef9d8ce6a13 +size 69822 diff --git a/images/Shaft_02804.png b/images/Shaft_02804.png new file mode 100644 index 0000000000000000000000000000000000000000..fbbb05d37fcd08626ec1aa102387fffaa5d0ecfb --- /dev/null +++ b/images/Shaft_02804.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40bff224a4227167e1b775019f39049a4d265778824f8ad8ae3fe277859e929f +size 93694 diff --git a/images/Shaft_02805.png b/images/Shaft_02805.png new file mode 100644 index 0000000000000000000000000000000000000000..4ada2300a7eaac1814021f02b289d2dcd147c144 --- /dev/null +++ b/images/Shaft_02805.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50ea4adc8b0c3267d11af8b0f768bd034119daa523cf5d306dc13b671397d312 +size 85452 diff --git a/images/Shaft_02806.png b/images/Shaft_02806.png new file mode 100644 index 0000000000000000000000000000000000000000..270950c6ce542d81861a2175af8c124f9546e8cb --- /dev/null +++ b/images/Shaft_02806.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bfbd211d3b47068bf7a46b06c27a2130170ee9201f71c7333da2a36a2ddcaca8 +size 92778 diff --git a/images/Shaft_02807.png b/images/Shaft_02807.png new file mode 100644 index 0000000000000000000000000000000000000000..886e91dd0dbda39d6aa178af87d0a5074eaa68a4 --- /dev/null +++ b/images/Shaft_02807.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e6323b7d0f2cafdafffbcddd114b559d005cc39ab6e6a595c166c3616203b03 +size 91677 diff --git a/images/Shaft_02808.png b/images/Shaft_02808.png new file mode 100644 index 0000000000000000000000000000000000000000..174022be00a1439c0487aec47e2194d8389795ef --- /dev/null +++ b/images/Shaft_02808.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dabae756d05ec6e0a63ff957d04f0a5eb5cecdd0ac145389feaa0df5192bca09 +size 74499 diff --git a/images/Shaft_02809.png b/images/Shaft_02809.png new file mode 100644 index 0000000000000000000000000000000000000000..df6d8a1b7200c12f47011e128e06deae0a7685bc --- /dev/null +++ b/images/Shaft_02809.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7fbd6aead0eef1e6baf578a923ae9425390a77f90e88c1b6f7bd54b7b2cf0ab +size 104995 diff --git a/images/Shaft_02810.png b/images/Shaft_02810.png new file mode 100644 index 0000000000000000000000000000000000000000..db66666edcb6764ed3a14c0933d3bbc58d861d04 --- /dev/null +++ b/images/Shaft_02810.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:deb9c4cad23ae41ef0be456e125e7eaa2252bafd05cfd4c0d7af0f310c8bdff4 +size 76278 diff --git a/images/Shaft_02811.png b/images/Shaft_02811.png new file mode 100644 index 0000000000000000000000000000000000000000..98bf40c9be034aa0e96e875435abf85ecd53189b --- /dev/null +++ b/images/Shaft_02811.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9cb6267f683d2b4256fa84b2ebe95aef57cb75371eeadd70bfcb1ebe591dd20 +size 95053 diff --git a/images/Shaft_02812.png b/images/Shaft_02812.png new file mode 100644 index 0000000000000000000000000000000000000000..a556cc1c02648f04ad34a278995e08db8259118c --- /dev/null +++ b/images/Shaft_02812.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a9cc846f88936f4972a002c83e2e13cfddbb5866e6e28a991b3c2b085daea9d +size 71982 diff --git a/images/Shaft_02813.png b/images/Shaft_02813.png new file mode 100644 index 0000000000000000000000000000000000000000..51355afbc300afd3d51ced8c2040e38f944cc2d3 --- /dev/null +++ b/images/Shaft_02813.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fa1f276a44d46939bbf25ee6d2cd1d2a121c08ff71bb0fd8484d8f757713c3b +size 76036 diff --git a/images/Shaft_02814.png b/images/Shaft_02814.png new file mode 100644 index 0000000000000000000000000000000000000000..e0f069b199cd51101a9bf48a69b850c969138ca7 --- /dev/null +++ b/images/Shaft_02814.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1706e6a4abad30b62e1b55f77f0af8c8ad1a9e40e4fb0000a007ad1b051b308a +size 86974 diff --git a/images/Shaft_02815.png b/images/Shaft_02815.png new file mode 100644 index 0000000000000000000000000000000000000000..40ecdd892ab5e4fb573eb8ecebfb3ca9b54d2175 --- /dev/null +++ b/images/Shaft_02815.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e14b783051969b9e895c4b6009cdf33b534d302979be68a5f1216e68a1dff44 +size 103311 diff --git a/images/Shaft_02816.png b/images/Shaft_02816.png new file mode 100644 index 0000000000000000000000000000000000000000..ecd5969cb333cc71274421a5e770e38ae65fcb97 --- /dev/null +++ b/images/Shaft_02816.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c49dae7f76d67c6485a1bd2563b2570246455d665c8bcc5184b06e3c2ad8b1b +size 108005 diff --git a/images/Shaft_02817.png b/images/Shaft_02817.png new file mode 100644 index 0000000000000000000000000000000000000000..7f486d6dc20d82110588e152dc9d2688a7ffd88b --- /dev/null +++ b/images/Shaft_02817.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a69c1fc40948f0ca1f960a53f85a1990023ad06b25671157d51d66133766c71 +size 79660 diff --git a/images/Shaft_02818.png b/images/Shaft_02818.png new file mode 100644 index 0000000000000000000000000000000000000000..7062c208bdca38b1474ad018996d967c004a4751 --- /dev/null +++ b/images/Shaft_02818.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0ceef432d3c5b729fec7860869d6a31ae7bb915b7b6133b30eaec816ccdb5d4 +size 91626 diff --git a/images/Shaft_02819.png b/images/Shaft_02819.png new file mode 100644 index 0000000000000000000000000000000000000000..f3e870d9c3918b5216c2cfd7d4958cf7fe3911d6 --- /dev/null +++ b/images/Shaft_02819.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8771201bd1076cdfee53f0cdfd6f9b7943de6bb0371cdc1402018a5a5818937d +size 82391 diff --git a/images/Shaft_02820.png b/images/Shaft_02820.png new file mode 100644 index 0000000000000000000000000000000000000000..9a2ffc7a698781eaa85c2ee87c8f3d31ec16a0e2 --- /dev/null +++ b/images/Shaft_02820.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01a509078664bde4369cfc18506fc411a4ca744049e460edeed32cb1cb2e6de6 +size 69258 diff --git a/images/Shaft_02821.png b/images/Shaft_02821.png new file mode 100644 index 0000000000000000000000000000000000000000..bae321ded72918e33e14665bedb1478e10d29c0c --- /dev/null +++ b/images/Shaft_02821.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:175d3dd4e4dd8e4ddf075063a975f4e9aeb0b73009d86522d89496e486e8ad33 +size 101766 diff --git a/images/Shaft_02822.png b/images/Shaft_02822.png new file mode 100644 index 0000000000000000000000000000000000000000..ab83e8551891ae0e1cc134b877a5781994b434d4 --- /dev/null +++ b/images/Shaft_02822.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e70c57864a7f30a626ce3d53662cc41f939d70cdf7cfe1d5696a77286c3ce5f +size 94270 diff --git a/images/Shaft_02823.png b/images/Shaft_02823.png new file mode 100644 index 0000000000000000000000000000000000000000..07790f46c45990a883798b255dd0bfc11140913d --- /dev/null +++ b/images/Shaft_02823.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c85663ce1ee43410a47b0869dff99a2bb2bb7e62f8aaff2d49836a2847202c6 +size 89577 diff --git a/images/Shaft_02824.png b/images/Shaft_02824.png new file mode 100644 index 0000000000000000000000000000000000000000..ed3e9ffd5c5a8cb313d8a285816f9e66b38500c9 --- /dev/null +++ b/images/Shaft_02824.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4047c1be7d9158e0d5a2f962e7df0bd5c5e8db838800381b64ba8f7378927d36 +size 75740 diff --git a/images/Shaft_02825.png b/images/Shaft_02825.png new file mode 100644 index 0000000000000000000000000000000000000000..51c1df130555d5df67723d1380f2c1c0678fae4a --- /dev/null +++ b/images/Shaft_02825.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbf8a119f11d6d4f2ca02f67e4b426e1f42376f391ec0defb0e60744a9ef5f6b +size 111255 diff --git a/images/Shaft_02826.png b/images/Shaft_02826.png new file mode 100644 index 0000000000000000000000000000000000000000..b9b4dca9d6728b993d1db79badce656da4c2acf8 --- /dev/null +++ b/images/Shaft_02826.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0d0045ff9af7ca9a201ea98f78dae51d8e0fb101655aff3b03eced77a2c676d +size 108938 diff --git a/images/Shaft_02827.png b/images/Shaft_02827.png new file mode 100644 index 0000000000000000000000000000000000000000..f83bb777590bbfdbe6dce6986575cf04c380fa86 --- /dev/null +++ b/images/Shaft_02827.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf79b0011ae1b1d93fd4f3012b280ddbe15a4e7f7fedf8036b3e3cfe55a4c377 +size 72725 diff --git a/images/Shaft_02828.png b/images/Shaft_02828.png new file mode 100644 index 0000000000000000000000000000000000000000..f74749ca699a31337d10c6876ac4eb0e1caeb31a --- /dev/null +++ b/images/Shaft_02828.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c3741da870cf4d08a99464440b3661877a6fd54a9ee07de2b77520d3bd6200b +size 91226 diff --git a/images/Shaft_02829.png b/images/Shaft_02829.png new file mode 100644 index 0000000000000000000000000000000000000000..7ae3eaa26cba92fecbde2acd0039ad58139cf898 --- /dev/null +++ b/images/Shaft_02829.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0cb8987215d19c0dadaef3b8db6194fd5f9188011f2a3477a716949fa4d0c8f3 +size 81390 diff --git a/images/Shaft_02830.png b/images/Shaft_02830.png new file mode 100644 index 0000000000000000000000000000000000000000..19567d347fda3ee2195e45dab9a701d7c0e05a9a --- /dev/null +++ b/images/Shaft_02830.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f65a36b9c2fbaa12dd3c66760c16b2cf1d34191fa0a748906c21692702d7893 +size 88274 diff --git a/images/Shaft_02831.png b/images/Shaft_02831.png new file mode 100644 index 0000000000000000000000000000000000000000..47a4e0cf81156238995ca41b13a8ce316d2e9221 --- /dev/null +++ b/images/Shaft_02831.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54eebeb26ea1fcac3cc0558d05b3656eda4d89dd3b34616d0cdad48b0c8d521a +size 78250 diff --git a/images/Shaft_02832.png b/images/Shaft_02832.png new file mode 100644 index 0000000000000000000000000000000000000000..c919c6af89de830740999010fc0dd32882911d1c --- /dev/null +++ b/images/Shaft_02832.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19ded9c8ff348a9a675bcd02c1bc77f7935d4fe2171366dff4683a8e18a2ad84 +size 98173 diff --git a/images/Shaft_02833.png b/images/Shaft_02833.png new file mode 100644 index 0000000000000000000000000000000000000000..a05b55d30ffccf7d6b598c45906057092fede4ca --- /dev/null +++ b/images/Shaft_02833.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46e1c9fac705b95d7cf36932a74e2d7214885357397bedb3de98cb2fc7e2333f +size 110530 diff --git a/images/Shaft_02834.png b/images/Shaft_02834.png new file mode 100644 index 0000000000000000000000000000000000000000..a70728f8bad5073c781b822bf707616d9a8783e0 --- /dev/null +++ b/images/Shaft_02834.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60f2a21e519ed9f9f1d9cf653a8406c8ca50fff7b37aad65fc98ce3af34a484f +size 84282 diff --git a/images/Shaft_02835.png b/images/Shaft_02835.png new file mode 100644 index 0000000000000000000000000000000000000000..6ad3c32196476f4bddee6f4e3c89e67f917c67f2 --- /dev/null +++ b/images/Shaft_02835.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c35fb9ea46c5e95ef1e0adf3da8afb9c386d18cb781c1a17fef6284d170a959 +size 74904 diff --git a/images/Shaft_02836.png b/images/Shaft_02836.png new file mode 100644 index 0000000000000000000000000000000000000000..c183ee87c429cf34bb8f83ee0df0432c273d14a7 --- /dev/null +++ b/images/Shaft_02836.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a919fdb1d9ebacc2f2c16c7e314b46ae8d3baabd85241db28adfbc7957177f6 +size 106733 diff --git a/images/Shaft_02837.png b/images/Shaft_02837.png new file mode 100644 index 0000000000000000000000000000000000000000..c4371e509d61b422f43be112521f421f20c42752 --- /dev/null +++ b/images/Shaft_02837.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df9fccbc77edcd047024dceea5a8f99652cf05ee35fcefff6c6fee203d6ba86d +size 85360 diff --git a/images/Shaft_02838.png b/images/Shaft_02838.png new file mode 100644 index 0000000000000000000000000000000000000000..e62b08c0f37770e44de7c30d127ca9e3d2fbcde5 --- /dev/null +++ b/images/Shaft_02838.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7e0578cb492ebc419be70cb78eeff2e6a72331d59585827f61168a2ace3c0f0 +size 70665 diff --git a/images/Shaft_02839.png b/images/Shaft_02839.png new file mode 100644 index 0000000000000000000000000000000000000000..ae0686c14802b5675a0693f183b30cbae5cdf09b --- /dev/null +++ b/images/Shaft_02839.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3c5fc08d40a5fa259b2fcd9d9423b05cad2f451c92ab2dc275f5da7a39ed75b +size 83005 diff --git a/images/Shaft_02840.png b/images/Shaft_02840.png new file mode 100644 index 0000000000000000000000000000000000000000..b6006d3754bc86210fefc3f7cd47dd329a07f51d --- /dev/null +++ b/images/Shaft_02840.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca61c5ce2142bfeed29c80ca48dddf0f9d37585f9acace5aae9214119b3064f3 +size 79270 diff --git a/images/Shaft_02841.png b/images/Shaft_02841.png new file mode 100644 index 0000000000000000000000000000000000000000..0b23af7eb3e5a65d39a5c77681796dafd2829e97 --- /dev/null +++ b/images/Shaft_02841.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbff9f7c7650ab919518c7d3520cdb873ab4a955e678e1e3d7674d2fcf07acca +size 80324 diff --git a/images/Shaft_02842.png b/images/Shaft_02842.png new file mode 100644 index 0000000000000000000000000000000000000000..5ff2472378d7dc5c305d7ffd25b714c171d89c10 --- /dev/null +++ b/images/Shaft_02842.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42900dcf9d8e4c7c99b9f492e7286b4e5c9d50cc92bbf0029f30c7a1990062f1 +size 97276 diff --git a/images/Shaft_02843.png b/images/Shaft_02843.png new file mode 100644 index 0000000000000000000000000000000000000000..1a293b49b773b7c08e466a65a45edfeed5535bf3 --- /dev/null +++ b/images/Shaft_02843.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9ff77f6c410f6f9ee4bc2890744af7ea10d26365a5fd7ef1b01172bfa424a57 +size 70575 diff --git a/images/Shaft_02844.png b/images/Shaft_02844.png new file mode 100644 index 0000000000000000000000000000000000000000..cca2156b61bd9d1ebfff2223b6b21db34b600afc --- /dev/null +++ b/images/Shaft_02844.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a7e4e6975be8e40db1f04ca7b04a1e79404f10b4a53e83cf39674073b860594 +size 80108 diff --git a/images/Shaft_02845.png b/images/Shaft_02845.png new file mode 100644 index 0000000000000000000000000000000000000000..03e428d24bdf2fb5eadaf6b9736e56ec6e866e77 --- /dev/null +++ b/images/Shaft_02845.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37a7c3f78188268f8d8a99f45d630933b9e42d171bbad4a0271d8c90550de04d +size 93237 diff --git a/images/Shaft_02846.png b/images/Shaft_02846.png new file mode 100644 index 0000000000000000000000000000000000000000..1201bb5c9e5d9a709cea79fe143b44a249bf0d29 --- /dev/null +++ b/images/Shaft_02846.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec0aabc6e098b061d4aa96dd41a765911a9fda7e67415e90414b310391d30a46 +size 100856 diff --git a/images/Shaft_02847.png b/images/Shaft_02847.png new file mode 100644 index 0000000000000000000000000000000000000000..dc09d58472d2523700f111487fdce580d96eb564 --- /dev/null +++ b/images/Shaft_02847.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f8c7d7b6a365696e51f7101ffc361b1c61e29e98b27c79637ebd7b6d9b3d706 +size 89773 diff --git a/images/Shaft_02848.png b/images/Shaft_02848.png new file mode 100644 index 0000000000000000000000000000000000000000..aab479e8d32fd2e829d8adb883c14c8ac97ab0c9 --- /dev/null +++ b/images/Shaft_02848.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b01504fb03184cb7ec160eeb08b04e48c1b389cec473877fce5842b6fbfe55e +size 72427 diff --git a/images/Shaft_02849.png b/images/Shaft_02849.png new file mode 100644 index 0000000000000000000000000000000000000000..f988f9a0f68e998e4531a316398509f1845311e4 --- /dev/null +++ b/images/Shaft_02849.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e53fe52f11ed6f27174586c844c8a3d0f498a7b9f580d49a5d092de252c3ebc +size 97967 diff --git a/images/Shaft_02850.png b/images/Shaft_02850.png new file mode 100644 index 0000000000000000000000000000000000000000..2290c25b652bf01cb0a0be80b0d802fa6ff34680 --- /dev/null +++ b/images/Shaft_02850.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4366d16e417ac6d6e75d4d34f9746daf3458258ac131199b3c2a44537c5dbeb1 +size 74713 diff --git a/images/Shaft_02851.png b/images/Shaft_02851.png new file mode 100644 index 0000000000000000000000000000000000000000..cb6f3be115a6930aea641b7fb6640bea2368411b --- /dev/null +++ b/images/Shaft_02851.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b5c22f6f6b713ce17728abde12beea16443a6232ef08399d05a156b99fddce5 +size 69362 diff --git a/images/Shaft_02852.png b/images/Shaft_02852.png new file mode 100644 index 0000000000000000000000000000000000000000..74dd8127961f6bb8ba6a2e6fd3695adb92c1667e --- /dev/null +++ b/images/Shaft_02852.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a06a72b5d57b6345afdd6144925794225f2b2ede88888a4dcc8f81ba74b50eb8 +size 93504 diff --git a/images/Shaft_02853.png b/images/Shaft_02853.png new file mode 100644 index 0000000000000000000000000000000000000000..7f97fdc1e7bf0e19ebf005bca9826ca61d668666 --- /dev/null +++ b/images/Shaft_02853.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de0b7609d4bfef64bdb6f1d4e3af8baf1efea1a71f173104648ebaf2e37d0e33 +size 98196 diff --git a/images/Shaft_02854.png b/images/Shaft_02854.png new file mode 100644 index 0000000000000000000000000000000000000000..c646faaf30327d733b6bb90be74396833c3051c8 --- /dev/null +++ b/images/Shaft_02854.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8a3f60476c61d3ebffd043c6d7156f161d92c33b374274deef9c438ca52295d +size 85738 diff --git a/images/Shaft_02855.png b/images/Shaft_02855.png new file mode 100644 index 0000000000000000000000000000000000000000..e1a42f70b55b2b58ea5dc52d8c1b7c04ca3c03c0 --- /dev/null +++ b/images/Shaft_02855.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43571a224ba00580cb71a8b79151634dc11b74f1a55393a2df37ff2ab9952e15 +size 84100 diff --git a/images/Shaft_02856.png b/images/Shaft_02856.png new file mode 100644 index 0000000000000000000000000000000000000000..f51161e54f2e83f035a325a12a6582edad9b0393 --- /dev/null +++ b/images/Shaft_02856.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e5ce833c077ebb84742f1937f0caae2419720bb2d67a25215f43daf1ed08533 +size 117056 diff --git a/images/Shaft_02857.png b/images/Shaft_02857.png new file mode 100644 index 0000000000000000000000000000000000000000..e4c4ff81ae58861102e7e7bbb616e7a10159210b --- /dev/null +++ b/images/Shaft_02857.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a73411ff139e47944c53a220837b9d02545ca1b691c2e78fc1bfb3a26fe595a +size 99688 diff --git a/images/Shaft_02858.png b/images/Shaft_02858.png new file mode 100644 index 0000000000000000000000000000000000000000..d63d15d4fbbf90bee94e6f5022051396ab29c7c5 --- /dev/null +++ b/images/Shaft_02858.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b5765f27b8306a9a45cdf8c186ccd3f1f5bbfa559e261c9a2156fa1aa842d2e +size 73092 diff --git a/images/Shaft_02859.png b/images/Shaft_02859.png new file mode 100644 index 0000000000000000000000000000000000000000..5d30d477403c87e3429d6eb9cee0212821e58dda --- /dev/null +++ b/images/Shaft_02859.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f109effa357e18052259b4bacb210ca31c192c64be58e021ccdc4ac48c8c868b +size 84432 diff --git a/images/Shaft_02860.png b/images/Shaft_02860.png new file mode 100644 index 0000000000000000000000000000000000000000..5066cf5eb45282680bc09a87574a0bde6c20e3a3 --- /dev/null +++ b/images/Shaft_02860.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a2e8296e6c378b2918161e20a95ca31436bfb491a7c6fd333db19d402254242 +size 76639 diff --git a/images/Shaft_02861.png b/images/Shaft_02861.png new file mode 100644 index 0000000000000000000000000000000000000000..766a59594e876fabb22fba06ec01cc5df4c74dea --- /dev/null +++ b/images/Shaft_02861.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50cbf4e39f8f64fe1f8baf96f806d599b0c509330d4698bc87743de2484e0c48 +size 68307 diff --git a/images/Shaft_02862.png b/images/Shaft_02862.png new file mode 100644 index 0000000000000000000000000000000000000000..4f5c2e3d522c45983ccc48bdbff4a5b7b97a60cc --- /dev/null +++ b/images/Shaft_02862.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:152f6b073e1a153770d4423b3021a333b435b7ef6d0ef46ce633ab73c53dd979 +size 76032 diff --git a/images/Shaft_02863.png b/images/Shaft_02863.png new file mode 100644 index 0000000000000000000000000000000000000000..7ae6ee932c2c84390799aab6285baf716bde2e07 --- /dev/null +++ b/images/Shaft_02863.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:969dba7ce513bc1417b1cc84c7663e148b325c5aefab8cce759d93d03de335cf +size 70948 diff --git a/images/Shaft_02864.png b/images/Shaft_02864.png new file mode 100644 index 0000000000000000000000000000000000000000..883db3c2872e5ad39d4ead78784fa36696eb02ed --- /dev/null +++ b/images/Shaft_02864.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a91ff8022c666838b884bbff8885cecef0f4776c8ed53a43ea2624515fe0b2d9 +size 70744 diff --git a/images/Shaft_02865.png b/images/Shaft_02865.png new file mode 100644 index 0000000000000000000000000000000000000000..0272ac1017a9296b7996696afc1dff39434fb62b --- /dev/null +++ b/images/Shaft_02865.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65c505653e990e62220255ee583b107b2113b722ffe15988682424813d590f78 +size 94845 diff --git a/images/Shaft_02866.png b/images/Shaft_02866.png new file mode 100644 index 0000000000000000000000000000000000000000..4c3684f6b5d23dd61beb4f089d872e799f63f570 --- /dev/null +++ b/images/Shaft_02866.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95707de874a0941778b6e30d0c81285e6d47d2b050bd0d5900a3444dfe9b475e +size 77897 diff --git a/images/Shaft_02867.png b/images/Shaft_02867.png new file mode 100644 index 0000000000000000000000000000000000000000..bb90e217c2ce74bbc9d389fb33a3635b666bfa89 --- /dev/null +++ b/images/Shaft_02867.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7af4b7e61a8597d7db9c980ba202180d39163985734c34d6c520d787d6ee19df +size 75676 diff --git a/images/Shaft_02868.png b/images/Shaft_02868.png new file mode 100644 index 0000000000000000000000000000000000000000..3c56564f6357e455d4c6b1ed15f1d2205ccc5302 --- /dev/null +++ b/images/Shaft_02868.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b6b1b3f259ae0094c1de712e256a2e21d47d5977f0738988fe5998249a2a41d +size 86374 diff --git a/images/Shaft_02869.png b/images/Shaft_02869.png new file mode 100644 index 0000000000000000000000000000000000000000..c860a60f1dfae8724c60198dc9d27a9ff06728d9 --- /dev/null +++ b/images/Shaft_02869.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa264ef7aa10f6b33e7fbdc332d52b956b35d21869f53075820505c650f6f70d +size 70606 diff --git a/images/Shaft_02870.png b/images/Shaft_02870.png new file mode 100644 index 0000000000000000000000000000000000000000..d341ccbaa25eed743bc117aa249800b36e76ac75 --- /dev/null +++ b/images/Shaft_02870.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4998e50dc6c097c4857a7423e3f25398129b9b7f9fbd6a9e85712662589b1f2 +size 82916 diff --git a/images/Shaft_02871.png b/images/Shaft_02871.png new file mode 100644 index 0000000000000000000000000000000000000000..10bb24bf4873be3a853c1698579bd7a1ebc8158d --- /dev/null +++ b/images/Shaft_02871.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:411c470c848574f37aa0e1f3646fcef0551678547ef6ef61e0194580904e3c73 +size 72260 diff --git a/images/Shaft_02872.png b/images/Shaft_02872.png new file mode 100644 index 0000000000000000000000000000000000000000..7c77236bb5f611819148be1a4e5f3180424b4832 --- /dev/null +++ b/images/Shaft_02872.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93f6a51aa5524126ee43fa56f2c7f9d9951c1cb29b3e9d07d4fd90c9dc0edf1d +size 79146 diff --git a/images/Shaft_02873.png b/images/Shaft_02873.png new file mode 100644 index 0000000000000000000000000000000000000000..11b3ab31811a6a7622eb6bd2a34b2b359e3cf8d6 --- /dev/null +++ b/images/Shaft_02873.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c04b5fcbd5ae89200930699049153a6c3216dbedbce462ec04a78148696959b +size 77811 diff --git a/images/Shaft_02874.png b/images/Shaft_02874.png new file mode 100644 index 0000000000000000000000000000000000000000..735acf8a785f0fb23bc95e693ce8bfafff384ade --- /dev/null +++ b/images/Shaft_02874.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75019d0cbf57560b5a32c2055f945bb6330f4afb6ee3a20b61de9c550aeecd0b +size 82960 diff --git a/images/Shaft_02875.png b/images/Shaft_02875.png new file mode 100644 index 0000000000000000000000000000000000000000..1ae63046ed573a0fe2a2fe20fc220d8439d2253e --- /dev/null +++ b/images/Shaft_02875.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3a2011077fb3bdb97b428b196c30964718acfd149b0879b19109d417aa0e30b +size 73266 diff --git a/images/Shaft_02876.png b/images/Shaft_02876.png new file mode 100644 index 0000000000000000000000000000000000000000..a9591acfe9ff66ead4360412959c82cfb318c661 --- /dev/null +++ b/images/Shaft_02876.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9060cc5377209c74565baf875aa9efc8d924f60a95d51d29fd04299226e3e1e +size 107592 diff --git a/images/Shaft_02877.png b/images/Shaft_02877.png new file mode 100644 index 0000000000000000000000000000000000000000..ee2fd731fd2d1463604024142bf0160a69077693 --- /dev/null +++ b/images/Shaft_02877.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0546cf23d85db3cf48a78a7de9bac981f6bc8ec8bde365e992faa413d691b78 +size 107072 diff --git a/images/Shaft_02878.png b/images/Shaft_02878.png new file mode 100644 index 0000000000000000000000000000000000000000..a9a296bde32d8a4bafccfc227a99f88b68492290 --- /dev/null +++ b/images/Shaft_02878.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:565602c639736860c78d7f9f9fb79f98556d8ee6ae10f8257452ca0b34a89245 +size 112971 diff --git a/images/Shaft_02879.png b/images/Shaft_02879.png new file mode 100644 index 0000000000000000000000000000000000000000..19f7b1826a28051face9735d0af6e56675d90bb9 --- /dev/null +++ b/images/Shaft_02879.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:649d0e0cea421d9c5cc66f4271b0ca91bb113b121226d27e539e77ff24035d92 +size 70157 diff --git a/images/Shaft_02880.png b/images/Shaft_02880.png new file mode 100644 index 0000000000000000000000000000000000000000..4ef5352463ea69e26d33c2134b8813443436dc7c --- /dev/null +++ b/images/Shaft_02880.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4143e96a2f128f9ff559d0a1a0ac11bbbb5bc4a469da9c64d889048ba647d475 +size 105949 diff --git a/images/Shaft_02881.png b/images/Shaft_02881.png new file mode 100644 index 0000000000000000000000000000000000000000..53596441cd9b293a6e7948e6a1d76df80a3941e7 --- /dev/null +++ b/images/Shaft_02881.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:930c80f5dba9bd57eaa8151256846bd2d87a19fbefbc3738095b6cbf6e5b0fe3 +size 75716 diff --git a/images/Shaft_02882.png b/images/Shaft_02882.png new file mode 100644 index 0000000000000000000000000000000000000000..30643b0c9eee5caf80c5069c392e8f7ebc8ff5ba --- /dev/null +++ b/images/Shaft_02882.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbfd829f6ec5a738d1b76edd7f992664816c55dcdca49b5ccf3b93d7371c3442 +size 87159 diff --git a/images/Shaft_02883.png b/images/Shaft_02883.png new file mode 100644 index 0000000000000000000000000000000000000000..58b69e8285dff29afea57814979d4b1baa1a8c5c --- /dev/null +++ b/images/Shaft_02883.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71c566302a6aa440befeda1f3db0ef1a55f0c53aee49efdaf11a8eebc6407748 +size 112015 diff --git a/images/Shaft_02884.png b/images/Shaft_02884.png new file mode 100644 index 0000000000000000000000000000000000000000..cbbf69dae11534b684cd4dea6e7b672e319363e8 --- /dev/null +++ b/images/Shaft_02884.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af1b218a7a2d34774af72faf22176ac906af00f6224260ff8c940dd0e406ce50 +size 71503 diff --git a/images/Shaft_02885.png b/images/Shaft_02885.png new file mode 100644 index 0000000000000000000000000000000000000000..d320141ff7641fcb9d0f971a3806d7246c9e0b8f --- /dev/null +++ b/images/Shaft_02885.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e4998b5feb5b9dea4c567e17bd54cced0f62c535b49652d556344c56d03c21c +size 83292 diff --git a/images/Shaft_02886.png b/images/Shaft_02886.png new file mode 100644 index 0000000000000000000000000000000000000000..52f04d0bf01bc0bfdae1dd82fb920f59e4ffbf20 --- /dev/null +++ b/images/Shaft_02886.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11024a70938a047bfaf345ce60dfabd5bb3eb354928f54df8198ab8ebad6d6c1 +size 98406 diff --git a/images/Shaft_02887.png b/images/Shaft_02887.png new file mode 100644 index 0000000000000000000000000000000000000000..651068c6010e122f0310d5e641e20fceefb7a7d3 --- /dev/null +++ b/images/Shaft_02887.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7f86d76ac94c91a920a19b7d9cd78e8a5aae8ed04b785d9bb05c4fdcdf528ac +size 99018 diff --git a/images/Shaft_02888.png b/images/Shaft_02888.png new file mode 100644 index 0000000000000000000000000000000000000000..a4afe02475398208199b6a1f97990cdcce6678ac --- /dev/null +++ b/images/Shaft_02888.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9735820ab85be524ce933e3027edb6ee4791d6bed3341d8efdec971d6b76f4eb +size 95759 diff --git a/images/Shaft_02889.png b/images/Shaft_02889.png new file mode 100644 index 0000000000000000000000000000000000000000..1f7470e05541cb23bcb1aae10ef7bb670d2db1e3 --- /dev/null +++ b/images/Shaft_02889.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8ecb546b4a36e32d1f1ba251d79b8955267f2d37e5f65de1f2d19f508b98233 +size 98359 diff --git a/images/Shaft_02890.png b/images/Shaft_02890.png new file mode 100644 index 0000000000000000000000000000000000000000..2ef936d97c245e70c645b0485a9e2b624247daa6 --- /dev/null +++ b/images/Shaft_02890.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7d5689f31a12e8a05564347835404eac92210387afa31e5d460e800e8b0b2b1 +size 77341 diff --git a/images/Shaft_02891.png b/images/Shaft_02891.png new file mode 100644 index 0000000000000000000000000000000000000000..3d16976d4419b258c8ffe4dc13536c75309131b2 --- /dev/null +++ b/images/Shaft_02891.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21ef6e683c453313f866cb19bc54e60216aed51d36e486a0e97dc84285bd4d8a +size 73975 diff --git a/images/Shaft_02892.png b/images/Shaft_02892.png new file mode 100644 index 0000000000000000000000000000000000000000..cc398d9cb5b938efe4122e0c2edc99d43b43a107 --- /dev/null +++ b/images/Shaft_02892.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50ecc31d92e47e91ec34cc8e8b6f0e01905024dd1d666405e2ed23edbc5e0eba +size 85240 diff --git a/images/Shaft_02893.png b/images/Shaft_02893.png new file mode 100644 index 0000000000000000000000000000000000000000..3d0d876d0593a1f0fffdb9a8818b56834349112b --- /dev/null +++ b/images/Shaft_02893.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2fd06bc72d5e307a711b424019979d8837948c2e06a2b5238d2dbe225c041a3 +size 89104 diff --git a/images/Shaft_02894.png b/images/Shaft_02894.png new file mode 100644 index 0000000000000000000000000000000000000000..a3730687ce423eecba2d6dd6e90d5e8292f8a3bc --- /dev/null +++ b/images/Shaft_02894.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e3f3349b686c7d02e695820d0e69ab1b99500be133ac6e8e681a0b486ca59c1 +size 98709 diff --git a/images/Shaft_02895.png b/images/Shaft_02895.png new file mode 100644 index 0000000000000000000000000000000000000000..9605c1768d25b7e54d68053f9d927cbe17cfa1f0 --- /dev/null +++ b/images/Shaft_02895.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7834d42dd74e3d403aa2fbaac2c7614bfa87558b4ec7b4bc1989d2e9bd9da6aa +size 91122 diff --git a/images/Shaft_02896.png b/images/Shaft_02896.png new file mode 100644 index 0000000000000000000000000000000000000000..4857cf83020762bdd59825b5aea51ed136e304d9 --- /dev/null +++ b/images/Shaft_02896.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a8e31c15956755d137148e1384f15e5546dacd9c649560cb73780b12be89cd5 +size 82223 diff --git a/images/Shaft_02897.png b/images/Shaft_02897.png new file mode 100644 index 0000000000000000000000000000000000000000..d95884482b47c16f086e8f61adb6040259b280f0 --- /dev/null +++ b/images/Shaft_02897.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3963d807d7dfd697528eaea97fb2f8f6093b49a8f6ee5e61cde5b8a75aefca33 +size 94387 diff --git a/images/Shaft_02898.png b/images/Shaft_02898.png new file mode 100644 index 0000000000000000000000000000000000000000..50932c2827f0e79117f47fc62aba1aa71c25953d --- /dev/null +++ b/images/Shaft_02898.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62a133757710dacf1fc4753359f772f715418b536ac9191e9e86394cf16f2481 +size 96923 diff --git a/images/Shaft_02899.png b/images/Shaft_02899.png new file mode 100644 index 0000000000000000000000000000000000000000..2e0f93c0f01175c1c1cc2f5142a8f55b485125bb --- /dev/null +++ b/images/Shaft_02899.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25b786c5ca3f6c1d321a188348c7eb4e081b69a76e369797c5babcc24d8742e6 +size 89462 diff --git a/images/Shaft_02900.png b/images/Shaft_02900.png new file mode 100644 index 0000000000000000000000000000000000000000..8993136b55ff61427b2a3f6dcdc2b6823f9a126b --- /dev/null +++ b/images/Shaft_02900.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07e59d48df1bf5623f460df8068d05bbc865994cc78c7ed91abf2fe58431b847 +size 90102 diff --git a/images/Shaft_02901.png b/images/Shaft_02901.png new file mode 100644 index 0000000000000000000000000000000000000000..68ddd534c3d552d405e8414188c3868f16d99b67 --- /dev/null +++ b/images/Shaft_02901.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d0155e3b3b7955949028a82cfe161bd645d958a08696e720d1aa0076310eaaf +size 73554 diff --git a/images/Shaft_02902.png b/images/Shaft_02902.png new file mode 100644 index 0000000000000000000000000000000000000000..8bfcf937ee9a31e7296e4d0596cf967f1e9afc8f --- /dev/null +++ b/images/Shaft_02902.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cd68711e8ced102991ed87fc76a67fa3333b0b07648a21d32136f0cbe43ef4e +size 102476 diff --git a/images/Shaft_02903.png b/images/Shaft_02903.png new file mode 100644 index 0000000000000000000000000000000000000000..27553e8389eae587332dba41c053930debabd6c9 --- /dev/null +++ b/images/Shaft_02903.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:257cc6318156bc568339cd90d21e164bdd9fd25b87516c0016be0a9da58a8a57 +size 75890 diff --git a/images/Shaft_02904.png b/images/Shaft_02904.png new file mode 100644 index 0000000000000000000000000000000000000000..834b8b6802f5fd72893d489bede85f4582982f39 --- /dev/null +++ b/images/Shaft_02904.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a8cab33404ab33578d6e83a5e3ef88b877a1fd4ae8026a27605b697aa7436b6 +size 69231 diff --git a/images/Shaft_02905.png b/images/Shaft_02905.png new file mode 100644 index 0000000000000000000000000000000000000000..164ec7b8e1abc367c8dd76cf64c3dcb9d9817f14 --- /dev/null +++ b/images/Shaft_02905.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecd3b87bbbe84ebf79d339f15ae30f230f04abeb4be0dd4f305b841da5e1f168 +size 87976 diff --git a/images/Shaft_02906.png b/images/Shaft_02906.png new file mode 100644 index 0000000000000000000000000000000000000000..593e70c276280e7d920590c19c0b37c4879b768b --- /dev/null +++ b/images/Shaft_02906.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7888919d7e97202e139cdb4f3e564ad5ee626cf2b74ae7f52b3e61af0ae5fedb +size 79049 diff --git a/images/Shaft_02907.png b/images/Shaft_02907.png new file mode 100644 index 0000000000000000000000000000000000000000..62965842a8ccf3d6aa025a70e0e72941be22ec11 --- /dev/null +++ b/images/Shaft_02907.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4c51f4315611fe3c10bbf519928d2bd0ab1e7772461600d388b3c5922143e06 +size 102141 diff --git a/images/Shaft_02908.png b/images/Shaft_02908.png new file mode 100644 index 0000000000000000000000000000000000000000..be53d86708495f921467be5c9fffd1ffdddb0056 --- /dev/null +++ b/images/Shaft_02908.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46b5d1ff8f5f14d33a7a556c5d7b93d5ec063fecffdbf39682a8f6817a45c01d +size 71181 diff --git a/images/Shaft_02909.png b/images/Shaft_02909.png new file mode 100644 index 0000000000000000000000000000000000000000..185528cb92283d11f92d09ccade62fbef2364b3d --- /dev/null +++ b/images/Shaft_02909.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d0f3ee9520a3884fdd76eda797bfc011049285f6b58949dad5165f6664b9198 +size 81350 diff --git a/images/Shaft_02910.png b/images/Shaft_02910.png new file mode 100644 index 0000000000000000000000000000000000000000..55a9c92f19bc2e5f281bf1deecac95949db117fd --- /dev/null +++ b/images/Shaft_02910.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c50eb31cc00723ab5db80ffd45634010c510b5667505a2e723f437091a0cbe9e +size 85029 diff --git a/images/Shaft_02911.png b/images/Shaft_02911.png new file mode 100644 index 0000000000000000000000000000000000000000..b6ee61c2e1f29d790ee03aa926f035f571e66d99 --- /dev/null +++ b/images/Shaft_02911.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f56024e0fe9aab3f618871ba40608542bff19eee07b9750da19c2deeced1b8bf +size 86429 diff --git a/images/Shaft_02912.png b/images/Shaft_02912.png new file mode 100644 index 0000000000000000000000000000000000000000..8708262574204c2f306c333bef108ddbb47c2345 --- /dev/null +++ b/images/Shaft_02912.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:262ec4969154f57b3f69822ef1cc1a9e3b5ba94f34fb857abb9a369e803e2c5a +size 79084 diff --git a/images/Shaft_02913.png b/images/Shaft_02913.png new file mode 100644 index 0000000000000000000000000000000000000000..9874b05cf553a445886b8bed9e3000d38969f141 --- /dev/null +++ b/images/Shaft_02913.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e4b9304d4e38094da0e658115381d4ce42be33987881c5e5b312d3e26d78bc6 +size 70680 diff --git a/images/Shaft_02914.png b/images/Shaft_02914.png new file mode 100644 index 0000000000000000000000000000000000000000..a96fe74453e692dc33498895e9b9da39535ae0fe --- /dev/null +++ b/images/Shaft_02914.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17caf000948458a9e98488944fda2f06c98eb79751008dc95539738875ef9fbb +size 90189 diff --git a/images/Shaft_02915.png b/images/Shaft_02915.png new file mode 100644 index 0000000000000000000000000000000000000000..eca4b8a914c6cb12d92bcc3b227cbd05165ba314 --- /dev/null +++ b/images/Shaft_02915.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:da7230cfa747c358ef22cb73cc96d0d05b0e9ecc8a7c3f00729eeae8e5559bce +size 78310 diff --git a/images/Shaft_02916.png b/images/Shaft_02916.png new file mode 100644 index 0000000000000000000000000000000000000000..e52f6ae967ec4cf64ae5effb4bd2af5b67b2dd96 --- /dev/null +++ b/images/Shaft_02916.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54b5884c0a3f2ea43222cb890b155498d932e5c1c90a5c38e4c99019726d44ab +size 70398 diff --git a/images/Shaft_02917.png b/images/Shaft_02917.png new file mode 100644 index 0000000000000000000000000000000000000000..56ab70ba0549c45886548719f222c9ae63f0eeb3 --- /dev/null +++ b/images/Shaft_02917.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf454bfe1e5597334101ffe71edc7c94885196957426c7b0a5fee613db96c1e2 +size 113263 diff --git a/images/Shaft_02918.png b/images/Shaft_02918.png new file mode 100644 index 0000000000000000000000000000000000000000..6d2a3158f9b16e905f89196561bb18721ed28e0f --- /dev/null +++ b/images/Shaft_02918.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:daeb31f9432fc121ad0e4194f023ea0aed27f82af8c719e023434a3af1d5c35c +size 93735 diff --git a/images/Shaft_02919.png b/images/Shaft_02919.png new file mode 100644 index 0000000000000000000000000000000000000000..854090a81bbc39838ab0d92f205dc568d9e7dcc9 --- /dev/null +++ b/images/Shaft_02919.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:128316b6b2ceb01da6f146f29545731be8bc27ad90b6aa88fa7cc8c09b18dd37 +size 87809 diff --git a/images/Shaft_02920.png b/images/Shaft_02920.png new file mode 100644 index 0000000000000000000000000000000000000000..f4e8bf35cde1e13a6758cd01ec2c9fbb5f38cc41 --- /dev/null +++ b/images/Shaft_02920.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49776406f36234b4e2993c35c57170f4fe384d141ef5a82f64fe5b764b46932a +size 69382 diff --git a/images/Shaft_02921.png b/images/Shaft_02921.png new file mode 100644 index 0000000000000000000000000000000000000000..429cb9d1e2bb7cecc3c2a4d24a1c2d7cbbd7eb19 --- /dev/null +++ b/images/Shaft_02921.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a2fc96a609e9e63e0468a18c3ec7274b638dd22ee87edb32825be294070b845 +size 78855 diff --git a/images/Shaft_02922.png b/images/Shaft_02922.png new file mode 100644 index 0000000000000000000000000000000000000000..327a0ea1b706630753e81abb7106c5b91e05fe98 --- /dev/null +++ b/images/Shaft_02922.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df2e7c31e21729821772635c814438168b6978834a6ddbb110875cc192157071 +size 71773 diff --git a/images/Shaft_02923.png b/images/Shaft_02923.png new file mode 100644 index 0000000000000000000000000000000000000000..2eb8d4237c296405fde5bae7f74b309542a9fd30 --- /dev/null +++ b/images/Shaft_02923.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:353270a1492708a0a46df4c1689408788c34685997f27c7b595b85309b3fbc9f +size 102017 diff --git a/images/Shaft_02924.png b/images/Shaft_02924.png new file mode 100644 index 0000000000000000000000000000000000000000..9d4c2feb6306d0a8f34071520135a5727ed75112 --- /dev/null +++ b/images/Shaft_02924.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b38bddc8b631f55c696237885250540961471005a166923a15b9e10c1ede598 +size 93180 diff --git a/images/Shaft_02925.png b/images/Shaft_02925.png new file mode 100644 index 0000000000000000000000000000000000000000..d52c16f6f7f579065f5aa15f493d8c46bddcefef --- /dev/null +++ b/images/Shaft_02925.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e2d3657329eaf2762b9c2c7fd2cb4f81c4bf6073d747a4592cbe89dca2f6689 +size 84790 diff --git a/images/Shaft_02926.png b/images/Shaft_02926.png new file mode 100644 index 0000000000000000000000000000000000000000..3068c82b3b20a5d83ecbc82ff45a2cfd677dcb4a --- /dev/null +++ b/images/Shaft_02926.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4690f5234fabd7897cb2ad1ad82d4e6eab2ff8cb498c4636a93b8b95af845a8d +size 78095 diff --git a/images/Shaft_02927.png b/images/Shaft_02927.png new file mode 100644 index 0000000000000000000000000000000000000000..b4cefbe0b458c02198e5517aebd4cb851fda6473 --- /dev/null +++ b/images/Shaft_02927.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10a032c3fceb9570bf8317629d67cb71748189f5732844afd4643269d486af6a +size 114514 diff --git a/images/Shaft_02928.png b/images/Shaft_02928.png new file mode 100644 index 0000000000000000000000000000000000000000..b46729fc447806670020bb30816259d184b31c19 --- /dev/null +++ b/images/Shaft_02928.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7efb3626a5f8acdd54bb395864d6fa2a829a93fecf0895f4192282b55061d35 +size 92264 diff --git a/images/Shaft_02929.png b/images/Shaft_02929.png new file mode 100644 index 0000000000000000000000000000000000000000..9f89132fe1101753d6288841d75887e9b378c0bd --- /dev/null +++ b/images/Shaft_02929.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8131ffb5f9f21183b78c9b95dc4879e0d3a1ece02d738fa8d01fc3f3b578e20 +size 101896 diff --git a/images/Shaft_02930.png b/images/Shaft_02930.png new file mode 100644 index 0000000000000000000000000000000000000000..c201f6946e5f107252630956127391457fbda44e --- /dev/null +++ b/images/Shaft_02930.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de20f408d28e05c38c49f5477a3dfc23072d99f5977fd4d76701edbff59bea66 +size 86223 diff --git a/images/Shaft_02931.png b/images/Shaft_02931.png new file mode 100644 index 0000000000000000000000000000000000000000..57a74c5e6829044feb29d97635d88bce2c1d0805 --- /dev/null +++ b/images/Shaft_02931.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4db9d96a1d589258e034cbf80382f8b8b8743d57561d37172724cd022699405d +size 74994 diff --git a/images/Shaft_02932.png b/images/Shaft_02932.png new file mode 100644 index 0000000000000000000000000000000000000000..8f04739e8d607a1c1791b506dd6572f5eb02b7eb --- /dev/null +++ b/images/Shaft_02932.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e3752a71408e9b4013a68da825de2aeb6144a41e3260bba9a95b7dc415e9c21 +size 85693 diff --git a/images/Shaft_02933.png b/images/Shaft_02933.png new file mode 100644 index 0000000000000000000000000000000000000000..2e9c31ae7c5596722177be12ab188f1bb9f77538 --- /dev/null +++ b/images/Shaft_02933.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8859b1fc5fb9283325a83a4e97db09f0aa270c41cedf763b0a8fc46ddd64104 +size 106569 diff --git a/images/Shaft_02934.png b/images/Shaft_02934.png new file mode 100644 index 0000000000000000000000000000000000000000..ef1f9d4046b62f221aa77ca5118a4b556f69ad51 --- /dev/null +++ b/images/Shaft_02934.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:322819211d48eaeb4a8b18a2576b4900cce8c9e16c80ef3f77bd0a26b593ed52 +size 99007 diff --git a/images/Shaft_02935.png b/images/Shaft_02935.png new file mode 100644 index 0000000000000000000000000000000000000000..85c15d652cd372376e01b5a6b90646a8883c5328 --- /dev/null +++ b/images/Shaft_02935.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e081444cc7cbb6bd248caab4d342f1c644621c62977f60898baf92fb61d3c0fc +size 85810 diff --git a/images/Shaft_02936.png b/images/Shaft_02936.png new file mode 100644 index 0000000000000000000000000000000000000000..bbbed7fad963605182ca61c35f061b0e68b76a4b --- /dev/null +++ b/images/Shaft_02936.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efd139ebd934f5eb7a4c45bbd166f16dac2b5f9212ee7a78384f2b6bf9444073 +size 83053 diff --git a/images/Shaft_02937.png b/images/Shaft_02937.png new file mode 100644 index 0000000000000000000000000000000000000000..767e276fb7da9325c4008a81a26c531142f36078 --- /dev/null +++ b/images/Shaft_02937.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cef5b99d040f0a495cef34063f1c64a5412ff74e229415af954e7d9c90717b5 +size 101785 diff --git a/images/Shaft_02938.png b/images/Shaft_02938.png new file mode 100644 index 0000000000000000000000000000000000000000..3951028d101b01ebac80da976b4fec677aa2dabd --- /dev/null +++ b/images/Shaft_02938.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d0b4c16e477c8d41f09ba5c28fb800fa1e282f59d9a4ec7c02f7bacabadac69 +size 93557 diff --git a/images/Shaft_02939.png b/images/Shaft_02939.png new file mode 100644 index 0000000000000000000000000000000000000000..333fd5b443fa0a71c74b87d34abcb627402df678 --- /dev/null +++ b/images/Shaft_02939.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45a000ee32002dca7f88434d47311c62a35267faa040d9d6ec2ca768adab4aff +size 81487 diff --git a/images/Shaft_02940.png b/images/Shaft_02940.png new file mode 100644 index 0000000000000000000000000000000000000000..0f0f5298e6cc2c35464a8f764b1d365afc827bbc --- /dev/null +++ b/images/Shaft_02940.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c014bf96d2e732fd22d5061a4c76de777defda1863a76896825dea1b3f82d547 +size 100279 diff --git a/images/Shaft_02941.png b/images/Shaft_02941.png new file mode 100644 index 0000000000000000000000000000000000000000..a1e7c4b0357495c0803fcb7a2fb135622ad8578f --- /dev/null +++ b/images/Shaft_02941.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d129639b6a449522a983f8311919fa5289381abe6e3476c46815e81adffde85 +size 75168 diff --git a/images/Shaft_02942.png b/images/Shaft_02942.png new file mode 100644 index 0000000000000000000000000000000000000000..b672c8a18838f2240d6e2785e58e9ad4283da644 --- /dev/null +++ b/images/Shaft_02942.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcc8c9f3cb0eb070f1e38ee142e9e149ff9af34720795f2fe0943e18c6ff89b9 +size 86354 diff --git a/images/Shaft_02943.png b/images/Shaft_02943.png new file mode 100644 index 0000000000000000000000000000000000000000..38e806b41c41fcf3c606532479cd60187660c738 --- /dev/null +++ b/images/Shaft_02943.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2068a450107ab369f739a800089d55a7c98731a55818bcf234dadd08521c83c +size 69017 diff --git a/images/Shaft_02944.png b/images/Shaft_02944.png new file mode 100644 index 0000000000000000000000000000000000000000..c6493e5c0d4d2222fdc01f49a2431a8b40720231 --- /dev/null +++ b/images/Shaft_02944.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6eab2fae2cf9663340487eeb1693d3aac0b1e66e42fcdbf3b3a23b4e670df5e6 +size 81065 diff --git a/images/Shaft_02945.png b/images/Shaft_02945.png new file mode 100644 index 0000000000000000000000000000000000000000..b9d39d2832213f464587946b0994537acd456fde --- /dev/null +++ b/images/Shaft_02945.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abcfa902403c59d472116c614d706ca588264a230653a565d5d39315f1b789e4 +size 81472 diff --git a/images/Shaft_02946.png b/images/Shaft_02946.png new file mode 100644 index 0000000000000000000000000000000000000000..81b072d239437f1fe60d017101955fc718630fcb --- /dev/null +++ b/images/Shaft_02946.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66954648360e642293cf7b794e799306ab8bd5cc7af3411710b3ee5f719b95c5 +size 85252 diff --git a/images/Shaft_02947.png b/images/Shaft_02947.png new file mode 100644 index 0000000000000000000000000000000000000000..a32050e3a066d862da6c1331617cb50ed2f62980 --- /dev/null +++ b/images/Shaft_02947.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf8e0ea340af01a6af136da182fb6e45526b7f4edb81ccd6a208bfcb577a0e02 +size 79345 diff --git a/images/Shaft_02948.png b/images/Shaft_02948.png new file mode 100644 index 0000000000000000000000000000000000000000..395dcc66ce4fa2452274dd545cbeefc8a4fab3e8 --- /dev/null +++ b/images/Shaft_02948.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:14019e23119d1a545c8033949f4a7ea0f706f29284686239521d56c98d42367c +size 72469 diff --git a/images/Shaft_02949.png b/images/Shaft_02949.png new file mode 100644 index 0000000000000000000000000000000000000000..df991bcc8b84340be8f732a1fbaa06210113f64f --- /dev/null +++ b/images/Shaft_02949.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:129cc864a797800022aa44a557649c0922e8c25b53a93105c3f0a1bf87a5e3a5 +size 74899 diff --git a/images/Shaft_02950.png b/images/Shaft_02950.png new file mode 100644 index 0000000000000000000000000000000000000000..20114c539ab5368ba2fbb7b9df637ffda1a31b50 --- /dev/null +++ b/images/Shaft_02950.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4e8551e7d6233296b77ab48d3fd97b6cfd263f63348e886fbd9f87ad7549f85 +size 88286 diff --git a/images/Shaft_02951.png b/images/Shaft_02951.png new file mode 100644 index 0000000000000000000000000000000000000000..b08ce1c67a4a88f04256b6fa5d0e923628a7d285 --- /dev/null +++ b/images/Shaft_02951.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb494f5e3dcc370390443fff900e84e91860ab325feaa4c75977aa4a438770ff +size 71374 diff --git a/images/Shaft_02952.png b/images/Shaft_02952.png new file mode 100644 index 0000000000000000000000000000000000000000..52b22e05d1fe3aded97574bc88fff15386aeb80d --- /dev/null +++ b/images/Shaft_02952.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e443d17e3cb42bcb8abe0396c220d206af280f9b7d3a0de28d5ef194251baa43 +size 74410 diff --git a/images/Shaft_02953.png b/images/Shaft_02953.png new file mode 100644 index 0000000000000000000000000000000000000000..bdd7b55cede0be2aca84c306788686f81d0439fa --- /dev/null +++ b/images/Shaft_02953.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:746c449b7a286c6bf543e943db5f5f2727a22a9f67ee1d1fe879876f6022eaab +size 77732 diff --git a/images/Shaft_02954.png b/images/Shaft_02954.png new file mode 100644 index 0000000000000000000000000000000000000000..6134afcdf8bcc2df7ed60123fb24b80acdc30e29 --- /dev/null +++ b/images/Shaft_02954.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b0926643caffde82578bfbc210840a32d441f3c4c3dda5a7163d8b4f61a0f27 +size 81941 diff --git a/images/Shaft_02955.png b/images/Shaft_02955.png new file mode 100644 index 0000000000000000000000000000000000000000..dd8ee8db606d2d8cb38a2ed0c1f2cc25de52f2ae --- /dev/null +++ b/images/Shaft_02955.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89fe8c8d4141354b1a3718721e449a4e6ab2e24f9e9ca3d27ea39f4b3ea80849 +size 85993 diff --git a/images/Shaft_02956.png b/images/Shaft_02956.png new file mode 100644 index 0000000000000000000000000000000000000000..3365cbc71a66c3c3046aa35b20b38681a989064b --- /dev/null +++ b/images/Shaft_02956.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e362a894ba290127dc5863a76573928e38f0d33221c6e7beaca20cd0b36445e4 +size 73717 diff --git a/images/Shaft_02957.png b/images/Shaft_02957.png new file mode 100644 index 0000000000000000000000000000000000000000..b3a13aaca6a48e606af0ad6817e6ccca05296848 --- /dev/null +++ b/images/Shaft_02957.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85698e5b3c8db4d683b42f3a5b8b1bf16ea34941d8bb704c1e32e9d929a546a6 +size 78197 diff --git a/images/Shaft_02958.png b/images/Shaft_02958.png new file mode 100644 index 0000000000000000000000000000000000000000..7fb09e8be0fb2d246936584ddff9e82dd06f9728 --- /dev/null +++ b/images/Shaft_02958.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f14573e14e193764f76cee9f3a9de5bb0c7c1dd46e55ee7040ab83fa842d681 +size 88314 diff --git a/images/Shaft_02959.png b/images/Shaft_02959.png new file mode 100644 index 0000000000000000000000000000000000000000..4ecb77ef075ccc09e0981c3ae6dd4211272a16ef --- /dev/null +++ b/images/Shaft_02959.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:088de0abdbf82f0925d7f8cf9cbfddd24a290a7f1f5da6e0605dee6c6f6dd53a +size 85685 diff --git a/images/Shaft_02960.png b/images/Shaft_02960.png new file mode 100644 index 0000000000000000000000000000000000000000..21ec0396ceae4f8323f30419353ba71fa8dd3d53 --- /dev/null +++ b/images/Shaft_02960.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4efb57a85be7eefdae1b0bf3f79e721d0bd0612fdac321cf6084d841b713282c +size 70615 diff --git a/images/Shaft_02961.png b/images/Shaft_02961.png new file mode 100644 index 0000000000000000000000000000000000000000..f24d332493abdcc1f5349b4b4659e0475e8f5e5f --- /dev/null +++ b/images/Shaft_02961.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9022a344ad42bbced9b93849c3479126adb08bdca49e2e405e0af3ed7200e365 +size 70713 diff --git a/images/Shaft_02962.png b/images/Shaft_02962.png new file mode 100644 index 0000000000000000000000000000000000000000..0535800e470def77d6bd5e81678058530f79a5f5 --- /dev/null +++ b/images/Shaft_02962.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a9d2e7967fbdf99942e8929d0b34c1df3fcff9d99500a2f2b17d7a5ee64007b +size 102009 diff --git a/images/Shaft_02963.png b/images/Shaft_02963.png new file mode 100644 index 0000000000000000000000000000000000000000..d246ca60cd2e7aa459436dc39a1afa2e9f8503d6 --- /dev/null +++ b/images/Shaft_02963.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9e183eb5a5527d7957650815b88fa7cd4eedf2121b9f5df24eeaee9a9dc0f78 +size 78742 diff --git a/images/Shaft_02964.png b/images/Shaft_02964.png new file mode 100644 index 0000000000000000000000000000000000000000..c834ef71314e0b125afb83008a75fdfa5b031383 --- /dev/null +++ b/images/Shaft_02964.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:991f5313d23853a1801a0a02aacd21c6d8c8371dec569a0db4fbb432d197b9ed +size 105456 diff --git a/images/Shaft_02965.png b/images/Shaft_02965.png new file mode 100644 index 0000000000000000000000000000000000000000..5b3a836457ad35012288eeeb1b66e59537e615df --- /dev/null +++ b/images/Shaft_02965.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c281bbf3cff2fb58eaefc096203b2330c32281e9a900c71617569fc6b00f3f5 +size 74524 diff --git a/images/Shaft_02966.png b/images/Shaft_02966.png new file mode 100644 index 0000000000000000000000000000000000000000..ca670405daf523c04dc8c1e1586a3d4a005a0cf6 --- /dev/null +++ b/images/Shaft_02966.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:561965f72f0a332920703c7158343de87ea77698c2e5245550a9fa6dcd7b3852 +size 94499 diff --git a/images/Shaft_02967.png b/images/Shaft_02967.png new file mode 100644 index 0000000000000000000000000000000000000000..20892ff40c2699ec0dd1dab04c0b782d2c665a6b --- /dev/null +++ b/images/Shaft_02967.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:477a55ca37ee2fc47ae37afe6dc479ac98d9e4f3c4a56186a606aff9169f955f +size 98381 diff --git a/images/Shaft_02968.png b/images/Shaft_02968.png new file mode 100644 index 0000000000000000000000000000000000000000..f68dcfdb5e07a44abc237bc135fb78276630bcc4 --- /dev/null +++ b/images/Shaft_02968.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9271fc884f466be8939151a45c214a3cadf6c814331d6d443265f12b37eb0771 +size 78837 diff --git a/images/Shaft_02969.png b/images/Shaft_02969.png new file mode 100644 index 0000000000000000000000000000000000000000..ff45766e6a4bcde2073d2f313fdd667d5fb4a2ce --- /dev/null +++ b/images/Shaft_02969.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fac0539963f5d62c6be00367aaec2ccd54a025220cc22e4798c356c0e466aa02 +size 84383 diff --git a/images/Shaft_02970.png b/images/Shaft_02970.png new file mode 100644 index 0000000000000000000000000000000000000000..7811cf390ff774bbe59cb7a26c60fa4241685767 --- /dev/null +++ b/images/Shaft_02970.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:253b54c30bc45bbf7b678f83fb89ba751c7e45deb32365f6d4fdd5e3642bb25d +size 76397 diff --git a/images/Shaft_02971.png b/images/Shaft_02971.png new file mode 100644 index 0000000000000000000000000000000000000000..6d778026fd66a44f47cdc8825555cc7e83b5f78a --- /dev/null +++ b/images/Shaft_02971.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c50702ba738323b5d55b261cd9841574f719c36da98432fde9b45c92e0b4085f +size 74042 diff --git a/images/Shaft_02972.png b/images/Shaft_02972.png new file mode 100644 index 0000000000000000000000000000000000000000..021f5070b09c20e1f6237054ae7383ed5b54a479 --- /dev/null +++ b/images/Shaft_02972.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8536a927d6324e8da57f06a4155262d91326b37e2ed5ca690039e49bd48fc94c +size 96443 diff --git a/images/Shaft_02973.png b/images/Shaft_02973.png new file mode 100644 index 0000000000000000000000000000000000000000..31294adc875d28fefabc4b75b490e95d4367f578 --- /dev/null +++ b/images/Shaft_02973.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b504176f1ef37eb304b35b80d8d074c5c51063b6f457c82ef51b0615cfa57905 +size 86149 diff --git a/images/Shaft_02974.png b/images/Shaft_02974.png new file mode 100644 index 0000000000000000000000000000000000000000..f25a8e496fa5ef2f5be1259e20f1ac6957124823 --- /dev/null +++ b/images/Shaft_02974.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a02888c99a459a22bde58019b31b916fc878acaf0ef35a573b06a30308933c0d +size 84839 diff --git a/images/Shaft_02975.png b/images/Shaft_02975.png new file mode 100644 index 0000000000000000000000000000000000000000..82e7e47ac46ca2ac0c86bb5c0a2e07cc8e2c9497 --- /dev/null +++ b/images/Shaft_02975.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2907f75e65da9e2f3a2c63d4a783a420c832fd56e8911b8a107c112b59a4493 +size 83455 diff --git a/images/Shaft_02976.png b/images/Shaft_02976.png new file mode 100644 index 0000000000000000000000000000000000000000..d61e2bd149d9a151e3802f549b91f0840544c585 --- /dev/null +++ b/images/Shaft_02976.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f52b5e4b4809e2fb7c50c6ba6eb2a38fe5b882462e53c8939678ea8b980be51 +size 85497 diff --git a/images/Shaft_02977.png b/images/Shaft_02977.png new file mode 100644 index 0000000000000000000000000000000000000000..a94e101b1e7b8eeb805d97282899b9ce654b807a --- /dev/null +++ b/images/Shaft_02977.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e6ad593964bfcce523c5a3248c9e39d55efe92b9243ff129bf421ac0598e8a0 +size 81310 diff --git a/images/Shaft_02978.png b/images/Shaft_02978.png new file mode 100644 index 0000000000000000000000000000000000000000..415636aca83f47ab498b279ce1232cdd3f1762b4 --- /dev/null +++ b/images/Shaft_02978.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1ea9722b678c3b0fc6fb43d91186a967f6795d4abfeb76fb81769e5cf1282dd +size 74535 diff --git a/images/Shaft_02979.png b/images/Shaft_02979.png new file mode 100644 index 0000000000000000000000000000000000000000..80355d0281b8c0e7cf814fb32931606ad18322fe --- /dev/null +++ b/images/Shaft_02979.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6aaefb3d91da5927483d07b6e9a70add0e6d583356d28d395d0f8c7bcb2f1f57 +size 72035 diff --git a/images/Shaft_02980.png b/images/Shaft_02980.png new file mode 100644 index 0000000000000000000000000000000000000000..99ec1e3c936a4ad10d7451b0506ea2aa097ac85c --- /dev/null +++ b/images/Shaft_02980.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5014efc071a74e82395870fa735abc29182682139681d1692f1ded2b2416d962 +size 84507 diff --git a/images/Shaft_02981.png b/images/Shaft_02981.png new file mode 100644 index 0000000000000000000000000000000000000000..b621ae29f9753828bcef9bbfe1516318c35ca911 --- /dev/null +++ b/images/Shaft_02981.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e309d2666d8ac8ac7a374cc965933763e986aa3f22bbbb56960b353b6d3a3416 +size 92687 diff --git a/images/Shaft_02982.png b/images/Shaft_02982.png new file mode 100644 index 0000000000000000000000000000000000000000..a273f1052097f370856c7a749fe3809b4d4e56f3 --- /dev/null +++ b/images/Shaft_02982.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44b171426ffb806403de9e456e6fbe6704384c456e2fc87064735fd512d57bc8 +size 72461 diff --git a/images/Shaft_02983.png b/images/Shaft_02983.png new file mode 100644 index 0000000000000000000000000000000000000000..bef1c4cee4c474d9f305b19387bd8046be69f976 --- /dev/null +++ b/images/Shaft_02983.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55e56c31c1c146cae808c64703992e72f9d606de1ebefc92e681ace8c0fa077f +size 102824 diff --git a/images/Shaft_02984.png b/images/Shaft_02984.png new file mode 100644 index 0000000000000000000000000000000000000000..3d3cf17ad44a4d977fe0ca863ac3d7e7551c83eb --- /dev/null +++ b/images/Shaft_02984.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b49a4ad66072ac4710ce21737505387ea1580760403d0dc57ad3aff24a5fcdfe +size 83458 diff --git a/images/Shaft_02985.png b/images/Shaft_02985.png new file mode 100644 index 0000000000000000000000000000000000000000..034322300148791455597701d79e149681a14be3 --- /dev/null +++ b/images/Shaft_02985.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef9f89a85d92a8f309237c70a5932b8f947d0fcef0229f57d07915ca4f48f78 +size 85667 diff --git a/images/Shaft_02986.png b/images/Shaft_02986.png new file mode 100644 index 0000000000000000000000000000000000000000..b785b917a9453bab5e14c1b82ce39a0f1d3f80ee --- /dev/null +++ b/images/Shaft_02986.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddf5338049bdd78d741ec8bbb78f965e22e1eed0b02f5b7440ae8766258606b7 +size 84185 diff --git a/images/Shaft_02987.png b/images/Shaft_02987.png new file mode 100644 index 0000000000000000000000000000000000000000..13a1a6e3dc86616ae4304f4de47d39215fa522fd --- /dev/null +++ b/images/Shaft_02987.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53575551a0044c0a34e538310b329d715100ab25183a891e040101589cdc2eb9 +size 84991 diff --git a/images/Shaft_02988.png b/images/Shaft_02988.png new file mode 100644 index 0000000000000000000000000000000000000000..41dd28a198d44a41bdff31305102f2a340adb5c3 --- /dev/null +++ b/images/Shaft_02988.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31c3ffe45b82824dc62643d04e2c3552c3173e9e02f26e8f99b14f9bf423bce9 +size 79221 diff --git a/images/Shaft_02989.png b/images/Shaft_02989.png new file mode 100644 index 0000000000000000000000000000000000000000..963eded8aa6e4ce823e57f51390f047018213007 --- /dev/null +++ b/images/Shaft_02989.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:818cf5f997ffa263d51df28fac56da36f4848570caa568669bcc4fca6cff976b +size 77245 diff --git a/images/Shaft_02990.png b/images/Shaft_02990.png new file mode 100644 index 0000000000000000000000000000000000000000..c443c19d4bd2f1a96150bc2a86220090063409d9 --- /dev/null +++ b/images/Shaft_02990.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3b8c340a213418148ccf2137f9b0921732859b8720333f66f38dac52643d7a9 +size 76393 diff --git a/images/Shaft_02991.png b/images/Shaft_02991.png new file mode 100644 index 0000000000000000000000000000000000000000..c6e99d1c175edd58b697e1146a99f421bbe39d70 --- /dev/null +++ b/images/Shaft_02991.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17ab572610cffa716a0f2454d589e7f5f428981fdf71bb0b5a70ce44ad321cc8 +size 95609 diff --git a/images/Shaft_02992.png b/images/Shaft_02992.png new file mode 100644 index 0000000000000000000000000000000000000000..18b4b3298e31d1d41542d8a7dd0a3385ec681a26 --- /dev/null +++ b/images/Shaft_02992.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf26826f633e2de932b4caaaa93c8a2232268f3945c93fd2eeaee2108d2a883c +size 83406 diff --git a/images/Shaft_02993.png b/images/Shaft_02993.png new file mode 100644 index 0000000000000000000000000000000000000000..8d97b92b1acefe577863e846ac999aa124c7f22c --- /dev/null +++ b/images/Shaft_02993.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:545d1fd58a3473e1862663bada76d59c4b2f92e074735bc6ae29611f12252cae +size 85155 diff --git a/images/Shaft_02994.png b/images/Shaft_02994.png new file mode 100644 index 0000000000000000000000000000000000000000..38432f87b9af6f65e783153ad0f46e2365118ca0 --- /dev/null +++ b/images/Shaft_02994.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36ac960ba9d736ed8a99f6983189b1caba37d54a0677b6f2097c398dd61a0b01 +size 72598 diff --git a/images/Shaft_02995.png b/images/Shaft_02995.png new file mode 100644 index 0000000000000000000000000000000000000000..a7e1f20084a89302b142fc979db5c14304df6157 --- /dev/null +++ b/images/Shaft_02995.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3328fbd58652b1ca2fad2b64ce53efec8852b280574cba4a97924306ef83213a +size 92846 diff --git a/images/Shaft_02996.png b/images/Shaft_02996.png new file mode 100644 index 0000000000000000000000000000000000000000..f93defd833c3f276bb04c7208b20601a79ac13f7 --- /dev/null +++ b/images/Shaft_02996.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd39a1b30c503997efab10b10dbcadc726fc0b24826c6669fbbd899f120b6f9e +size 74126 diff --git a/images/Shaft_02997.png b/images/Shaft_02997.png new file mode 100644 index 0000000000000000000000000000000000000000..fc34848bc91774d2f06248fdc2fedb084fec49cd --- /dev/null +++ b/images/Shaft_02997.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:77cbec8ec8e70e8b8a8886e82ca223d12f009feac2ebf8f89cb60740578dcb0b +size 105847 diff --git a/images/Shaft_02998.png b/images/Shaft_02998.png new file mode 100644 index 0000000000000000000000000000000000000000..040e3e982b7a47b5d73dad675f55e97ec698194d --- /dev/null +++ b/images/Shaft_02998.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2753550e2f9f21da1b51431f7217eb06c5a7c2c05b7cb870033d08a4a76f48f +size 73465 diff --git a/images/Shaft_02999.png b/images/Shaft_02999.png new file mode 100644 index 0000000000000000000000000000000000000000..211873caeeba5acc3768fea4f0004e23b6d40543 --- /dev/null +++ b/images/Shaft_02999.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d59ca86c7010876a514ce8998788dadf9033637cbc33b4bfb8027f895897fd2 +size 106775 diff --git a/images/Shaft_03000.png b/images/Shaft_03000.png new file mode 100644 index 0000000000000000000000000000000000000000..7e6dc2980ae7187e8cdf72bf681436f1a90ae043 --- /dev/null +++ b/images/Shaft_03000.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42f2fbfb0b728ceaec0853cc753e1287fe70761075bf833b6d292397627e302d +size 103228 diff --git a/images/Shaft_03001.png b/images/Shaft_03001.png new file mode 100644 index 0000000000000000000000000000000000000000..dc1d97a5b6e03dd4583210709b199ff23ed0c8c3 --- /dev/null +++ b/images/Shaft_03001.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b7840125afd1851fbd7fb1b9d76f0196b8fe814ed58bc5ebadb39ccf34de8ce +size 87677 diff --git a/images/Shaft_03002.png b/images/Shaft_03002.png new file mode 100644 index 0000000000000000000000000000000000000000..1d0b7f27a60ea9e06b835959748624ff2d971762 --- /dev/null +++ b/images/Shaft_03002.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33fc0c2934188891d85041608599db5841e31776f51156fb79f5a5fac83d48f4 +size 89649 diff --git a/images/Shaft_03003.png b/images/Shaft_03003.png new file mode 100644 index 0000000000000000000000000000000000000000..bbcb3c4fca383e6ef834ea75e9ce271bb9701981 --- /dev/null +++ b/images/Shaft_03003.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0401d515eed6a913f495f2c9b644844f7c32304cc0a64de0873f9803dd698969 +size 96834 diff --git a/images/Shaft_03004.png b/images/Shaft_03004.png new file mode 100644 index 0000000000000000000000000000000000000000..a2be15042dfb26d21bd1fd8e692ad9371e11f937 --- /dev/null +++ b/images/Shaft_03004.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb61822e1a2ab4289cd86b89ba6151b8da5c4d91ee65f537528cb21603db850c +size 110066 diff --git a/images/Shaft_03005.png b/images/Shaft_03005.png new file mode 100644 index 0000000000000000000000000000000000000000..22b84b32cd2dba6ca93bb659c530e26cf73be8c5 --- /dev/null +++ b/images/Shaft_03005.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bac0fac4ce59333a3cdc33a88d59a1fe082d4f4035b2c386b8a5ec928b5d640c +size 72704 diff --git a/images/Shaft_03006.png b/images/Shaft_03006.png new file mode 100644 index 0000000000000000000000000000000000000000..ba3f0551b7998c34071414f9bf9513ef9f45fdc2 --- /dev/null +++ b/images/Shaft_03006.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db388ee8846de6a5f21a706f17c97485941f2edea1a072c60c9a5382e1a07416 +size 81772 diff --git a/images/Shaft_03007.png b/images/Shaft_03007.png new file mode 100644 index 0000000000000000000000000000000000000000..02276b48064e4d49344bf913ee70d53d4cfa6699 --- /dev/null +++ b/images/Shaft_03007.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdcc91d1122f319b211cd5319ed463d325bd3b9c02ae82f0514332611c46668e +size 92994 diff --git a/images/Shaft_03008.png b/images/Shaft_03008.png new file mode 100644 index 0000000000000000000000000000000000000000..c5ea121b420a4a1fef4cb150ce4a371f5bb24821 --- /dev/null +++ b/images/Shaft_03008.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ed0d00c2a4fae4acd734aadcca03dcc3c52050461822e49c703549a3499768e +size 82641 diff --git a/images/Shaft_03009.png b/images/Shaft_03009.png new file mode 100644 index 0000000000000000000000000000000000000000..e55290d939ef9a2e64a1eefa89bbe6aeaa47a48a --- /dev/null +++ b/images/Shaft_03009.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3787177feb65203203b431da4d79d6717418f31a57f263fb546ff1e2e7bf1668 +size 77205 diff --git a/images/Shaft_03010.png b/images/Shaft_03010.png new file mode 100644 index 0000000000000000000000000000000000000000..45960b0a5b402f51b06cc671ca91a4e35a311980 --- /dev/null +++ b/images/Shaft_03010.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa5ff06d5e050989870754776be41d537d1f0512576253b42a7a382dbe54d478 +size 92121 diff --git a/images/Shaft_03011.png b/images/Shaft_03011.png new file mode 100644 index 0000000000000000000000000000000000000000..199ca658c14f78779a8b8b0f47c8151dc11a164c --- /dev/null +++ b/images/Shaft_03011.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f10505fbdcf16196f66430b84fb258d9fa5618905c835c10d85903f78e2e2e5 +size 72669 diff --git a/images/Shaft_03012.png b/images/Shaft_03012.png new file mode 100644 index 0000000000000000000000000000000000000000..86605cff2da869eb82bc1a9b61f6172c2949f3a4 --- /dev/null +++ b/images/Shaft_03012.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07a03a91eab3d3ccf84b3d4acb7fc2e6cfe1ee26f9136575e186f17b9f33d415 +size 84497 diff --git a/images/Shaft_03013.png b/images/Shaft_03013.png new file mode 100644 index 0000000000000000000000000000000000000000..13ce66a72a66f2488f0009dd0fed2375a03b1d43 --- /dev/null +++ b/images/Shaft_03013.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19b1741a45add3283687f8a75cf6d4501111dd0cd9376325df0a6b5efce5446e +size 69737 diff --git a/images/Shaft_03014.png b/images/Shaft_03014.png new file mode 100644 index 0000000000000000000000000000000000000000..858c3092c1f46b7e5a95a33bb079038deabd26d3 --- /dev/null +++ b/images/Shaft_03014.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de801d3cbf2dbf94a39c3f9ee8bd4c21174c31357420a3e0b611b9c2abed8fc1 +size 72472 diff --git a/images/Shaft_03015.png b/images/Shaft_03015.png new file mode 100644 index 0000000000000000000000000000000000000000..71452b2993f3061001ab91b345f94642d856bbac --- /dev/null +++ b/images/Shaft_03015.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e6b5b77e9ee2892cb6fdd9fe60a0a499c6ef1076c80a04e9b6d560da30c9c3e +size 85450 diff --git a/images/Shaft_03016.png b/images/Shaft_03016.png new file mode 100644 index 0000000000000000000000000000000000000000..0b4de294285c6e9a9d6eadb256c210d8b2249a7b --- /dev/null +++ b/images/Shaft_03016.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af403d87a344b5e30154153c7257bafd9e8d025ef41f4653a91a38d0f39061e3 +size 71002 diff --git a/images/Shaft_03017.png b/images/Shaft_03017.png new file mode 100644 index 0000000000000000000000000000000000000000..969935e016b05e4d5f56bc9be86eee766fc69097 --- /dev/null +++ b/images/Shaft_03017.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2708b6f7808e3de508ecf057f5b1fc0bea94b0080215eef768a7ad4a4bea6b66 +size 78881 diff --git a/images/Shaft_03018.png b/images/Shaft_03018.png new file mode 100644 index 0000000000000000000000000000000000000000..3845e94ec15867bf557c199fee57706f5046eb8e --- /dev/null +++ b/images/Shaft_03018.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e87be57d4d3ea6d3c4beca8b0beefc525c2234571868ba492abd28fd69f69a3 +size 74485 diff --git a/images/Shaft_03019.png b/images/Shaft_03019.png new file mode 100644 index 0000000000000000000000000000000000000000..5358823a8d3da0fc68877f4f76064dc92149db88 --- /dev/null +++ b/images/Shaft_03019.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97575570c430630107115a81e1cc263aaa735ce0de345d5c666f215e0a4a3140 +size 98262 diff --git a/images/Shaft_03020.png b/images/Shaft_03020.png new file mode 100644 index 0000000000000000000000000000000000000000..b153dc47ff4169869b6a4d55a29f9f2a9681c053 --- /dev/null +++ b/images/Shaft_03020.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09b6129cd20feceaa72683c51cb4e0ee1ec14c3039733dca926ccb43a98fe2b3 +size 69376 diff --git a/images/Shaft_03021.png b/images/Shaft_03021.png new file mode 100644 index 0000000000000000000000000000000000000000..51cf0667eafc9326fbf05ca562ddf67c046f20e6 --- /dev/null +++ b/images/Shaft_03021.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25f305e3f1d8337b9d2bccf7d0ae566ce6a8130c96903df679cb66a499774047 +size 80076 diff --git a/images/Shaft_03022.png b/images/Shaft_03022.png new file mode 100644 index 0000000000000000000000000000000000000000..2ef630e992a21b634162e56888121c1b0d826f26 --- /dev/null +++ b/images/Shaft_03022.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7113506b4a1ac0e4efbdf8158cb7ac4251f816b85a0223be4ad992c0604361e4 +size 107135 diff --git a/images/Shaft_03023.png b/images/Shaft_03023.png new file mode 100644 index 0000000000000000000000000000000000000000..a5e957606d5f2ef24847681db8f1927c8efb7719 --- /dev/null +++ b/images/Shaft_03023.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c26d1ca29398bf4c01369dfa1c89f3bcb404fe247305e36280c9e22443698a1 +size 84602 diff --git a/images/Shaft_03024.png b/images/Shaft_03024.png new file mode 100644 index 0000000000000000000000000000000000000000..b239af2bd8f191ab891b756a984bce8bf1c24e58 --- /dev/null +++ b/images/Shaft_03024.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:795d5f06b302aa02fe991e6b10fe596b23fb4af8e2d4342efc48580f4675f0e4 +size 76116 diff --git a/images/Shaft_03025.png b/images/Shaft_03025.png new file mode 100644 index 0000000000000000000000000000000000000000..916606be70e5100143926c62da14b10c623a1052 --- /dev/null +++ b/images/Shaft_03025.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9bace3fd16f063f7441f94e49df5afb38bb4ce5565e2ba576df648c6a804e0f +size 103816 diff --git a/images/Shaft_03026.png b/images/Shaft_03026.png new file mode 100644 index 0000000000000000000000000000000000000000..c98a0d337be3a31a777f0d2f99895951edda9220 --- /dev/null +++ b/images/Shaft_03026.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:62616c9e18a1936523c5bd294473d3651465a98aa163323081bc83764a42839a +size 79561 diff --git a/images/Shaft_03027.png b/images/Shaft_03027.png new file mode 100644 index 0000000000000000000000000000000000000000..3326a86014c3af2f48448a0dfafdc80ebd1e9a6d --- /dev/null +++ b/images/Shaft_03027.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8397e67d8a13ed2dc3ca0a8b953c2983684b3a7e40dbda86eb1f48788cfd67f +size 91231 diff --git a/images/Shaft_03028.png b/images/Shaft_03028.png new file mode 100644 index 0000000000000000000000000000000000000000..827f0a820fbf4600c5c8be9e59f3751529408dc4 --- /dev/null +++ b/images/Shaft_03028.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20d3d6875961ef92943816dc8c47ad0ed68114a9c78dd76be6c41a72e3d9125a +size 69458 diff --git a/images/Shaft_03029.png b/images/Shaft_03029.png new file mode 100644 index 0000000000000000000000000000000000000000..5ffd0baf70dfe617c7a80f30cb4ec2b431f6b70d --- /dev/null +++ b/images/Shaft_03029.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a760a75bac6c804ae83daef936ee2d7201352a3244c7702c2751a260f3ae754 +size 92519 diff --git a/images/Shaft_03030.png b/images/Shaft_03030.png new file mode 100644 index 0000000000000000000000000000000000000000..dcd641fbf3e954e798c32c60a8504db662906bb3 --- /dev/null +++ b/images/Shaft_03030.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b516708ab18077525bdc368f067329277be8af94deb0469e6e6f881f03a989b +size 108509 diff --git a/images/Shaft_03031.png b/images/Shaft_03031.png new file mode 100644 index 0000000000000000000000000000000000000000..2255bb58e4cd46637519c47c9d47092c4180af3d --- /dev/null +++ b/images/Shaft_03031.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32401815ba5232ae360b76dbac4d7e7ba271e23a0f2ac67bd41d375fc379de6c +size 106297 diff --git a/images/Shaft_03032.png b/images/Shaft_03032.png new file mode 100644 index 0000000000000000000000000000000000000000..575110e2c0a5ab262e0c368f13a67fbd2dd287ad --- /dev/null +++ b/images/Shaft_03032.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fad581b4cea60d1690603eed6ce77868c5bdd0838fde7f09b4192afc59b369f8 +size 111624 diff --git a/images/Shaft_03033.png b/images/Shaft_03033.png new file mode 100644 index 0000000000000000000000000000000000000000..49eeadf1cbce8c2878302d41d846bd78c45e3097 --- /dev/null +++ b/images/Shaft_03033.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a414e98ba100e2e133bbde70c2bb2fb3e0dc2642b0934638081f3718510f61f +size 81250 diff --git a/images/Shaft_03034.png b/images/Shaft_03034.png new file mode 100644 index 0000000000000000000000000000000000000000..93bf6ee6d9c198984b5ebdb6eb6b0933f3835771 --- /dev/null +++ b/images/Shaft_03034.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16d58fbdca899028da4343dbfb65b1c95a45bdb19c27db950638e673cc8c23ab +size 72915 diff --git a/images/Shaft_03035.png b/images/Shaft_03035.png new file mode 100644 index 0000000000000000000000000000000000000000..931d93cea468f3e5de55ba8851ac389f9b750730 --- /dev/null +++ b/images/Shaft_03035.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe70c78ff104f400c39faba9b49bf51348176985e10b0d9f457aebf463dfed94 +size 74432 diff --git a/images/Shaft_03036.png b/images/Shaft_03036.png new file mode 100644 index 0000000000000000000000000000000000000000..17a8c2f6233bbbfe0c7082a77c8df1d2d3fb5e28 --- /dev/null +++ b/images/Shaft_03036.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69bd64c1c22f9fcc7fff192745d34432190cca77e51756d60612f024c841ce30 +size 74222 diff --git a/images/Shaft_03037.png b/images/Shaft_03037.png new file mode 100644 index 0000000000000000000000000000000000000000..136daa5b3ec38e115b5d1f360130dae93dac71bc --- /dev/null +++ b/images/Shaft_03037.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f46feb9830c3ef1a05505f43fa172168f1c1ef940da6ce04e1cd2f59a970514d +size 92460 diff --git a/images/Shaft_03038.png b/images/Shaft_03038.png new file mode 100644 index 0000000000000000000000000000000000000000..3ed00533faa76fd5423bc2f705c3a53e21023941 --- /dev/null +++ b/images/Shaft_03038.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e21ce73e8598fbf026902269d32af9c9b34fe977dbb2fa62b017ad726be9e94 +size 89736 diff --git a/images/Shaft_03039.png b/images/Shaft_03039.png new file mode 100644 index 0000000000000000000000000000000000000000..dfb6913689eee0e96d2dc2676964180f5f1ec7e3 --- /dev/null +++ b/images/Shaft_03039.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d98845438cd49e8361db43fa95a2c97012ca8d6fd23cfb79224943fe7240cde +size 93838 diff --git a/images/Shaft_03040.png b/images/Shaft_03040.png new file mode 100644 index 0000000000000000000000000000000000000000..9d330e836b084004c34df03cee7772c5f0b00123 --- /dev/null +++ b/images/Shaft_03040.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f36675d10816c144143289294f4d9a6be3b3891048d33215b5931ac21191931f +size 76569 diff --git a/images/Shaft_03041.png b/images/Shaft_03041.png new file mode 100644 index 0000000000000000000000000000000000000000..66ab61e480848aa27b03f0fba6f1294c6372b24f --- /dev/null +++ b/images/Shaft_03041.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc1a5248afa2834a9be7e6694c9716f54320f239fbce081dfe14194d1d820230 +size 77819 diff --git a/images/Shaft_03042.png b/images/Shaft_03042.png new file mode 100644 index 0000000000000000000000000000000000000000..18e556a4f3f9e023d33423d662c8e427e67317e3 --- /dev/null +++ b/images/Shaft_03042.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0883460e8582957f7729b509f37b2c575a028cc61bd3a3063a66be593dfd4d9f +size 90615 diff --git a/images/Shaft_03043.png b/images/Shaft_03043.png new file mode 100644 index 0000000000000000000000000000000000000000..9ebf2d6ed5b7822517e4b5cd5cb28317b6bdf6e1 --- /dev/null +++ b/images/Shaft_03043.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db317b3fbc9881d2aba450ab45c5f4224e3f9fa2475b613a27d02d1ac2a8ade9 +size 104310 diff --git a/images/Shaft_03044.png b/images/Shaft_03044.png new file mode 100644 index 0000000000000000000000000000000000000000..8e0573d27f23019778d82dd7f2afafafcaade77f --- /dev/null +++ b/images/Shaft_03044.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:576de9eda6099a3912cdc43bd14d16df70034b41a44fc791f75658a40c7a78b3 +size 70237 diff --git a/images/Shaft_03045.png b/images/Shaft_03045.png new file mode 100644 index 0000000000000000000000000000000000000000..6296aa8b58c9ea9f6b3582b0bf224fcea9cda135 --- /dev/null +++ b/images/Shaft_03045.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1315ba22cc46db58945cc1bdd1a06002af578520a652d37710c5d94bd3da9fee +size 89411 diff --git a/images/Shaft_03046.png b/images/Shaft_03046.png new file mode 100644 index 0000000000000000000000000000000000000000..d7810f00ca061d12725b0a21057e84bf549b01a0 --- /dev/null +++ b/images/Shaft_03046.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e42867b0eda30c9a8d53065b64f30e8272d2cf05865ccd3b3757f598215494d1 +size 90964 diff --git a/images/Shaft_03047.png b/images/Shaft_03047.png new file mode 100644 index 0000000000000000000000000000000000000000..c103fc7670304ce20155d3def1c2b5518a0f5fcf --- /dev/null +++ b/images/Shaft_03047.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88b18a973b62e9e7e9f6eef2348df8c3035a6e23bc7e39b64422437de662aa6d +size 71806 diff --git a/images/Shaft_03048.png b/images/Shaft_03048.png new file mode 100644 index 0000000000000000000000000000000000000000..591cf93a75e5da9b9cf7f21290b317bd7b045a95 --- /dev/null +++ b/images/Shaft_03048.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40f921f8aee0af53af8de12246a75583aa181aee5132a98d3b7fc0061400db87 +size 97473 diff --git a/images/Shaft_03049.png b/images/Shaft_03049.png new file mode 100644 index 0000000000000000000000000000000000000000..9afed48d6f3630358380b9f8da3b8e0ff2bb20bd --- /dev/null +++ b/images/Shaft_03049.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:764d0b93ba82d3352a9c13226b46cf5feeec661ed2225ba661cc53ac01d68466 +size 92125 diff --git a/images/Shaft_03050.png b/images/Shaft_03050.png new file mode 100644 index 0000000000000000000000000000000000000000..9f340d6670ce91ca9eb80f64edd562d1d0682ccc --- /dev/null +++ b/images/Shaft_03050.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3014e8d65b8a261de1726641477b9fef4fb64afc00b31bad10ae679178a0de7 +size 68961 diff --git a/images/Shaft_03051.png b/images/Shaft_03051.png new file mode 100644 index 0000000000000000000000000000000000000000..11fa7bd18d72329f430d0c4f68bc753210920804 --- /dev/null +++ b/images/Shaft_03051.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b69ae6a16a6d15ecda554547c3f86fd11b87562f83334b2cee1cbb2a96fd1e1c +size 79578 diff --git a/images/Shaft_03052.png b/images/Shaft_03052.png new file mode 100644 index 0000000000000000000000000000000000000000..72a472ecee9ca015f1900b5457756ed019288a76 --- /dev/null +++ b/images/Shaft_03052.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15cbfcac3780eebc6d1110e82e6b1dec3f821ba7b818ee2c5841c7495e7e9782 +size 80824 diff --git a/images/Shaft_03053.png b/images/Shaft_03053.png new file mode 100644 index 0000000000000000000000000000000000000000..cd36d52bc1fb8a6b3e5a8a20eb39a6eecc0b7455 --- /dev/null +++ b/images/Shaft_03053.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:238e9d5a4f79ece3e42ff7b233fbf29eef613d6ae8faf1dca31e7e5838412ebb +size 97645 diff --git a/images/Shaft_03054.png b/images/Shaft_03054.png new file mode 100644 index 0000000000000000000000000000000000000000..0616cf6808cf09f4ded28719c77aa9ec4a5f0ffb --- /dev/null +++ b/images/Shaft_03054.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ec8cfdb3d82c0919c039e47972db72e0d260ed3e77cdd16882c8761c841ea72 +size 91929 diff --git a/images/Shaft_03055.png b/images/Shaft_03055.png new file mode 100644 index 0000000000000000000000000000000000000000..021e2e045bfb0240793de719f69e869304f91616 --- /dev/null +++ b/images/Shaft_03055.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99aa2363632c547ff1b2e662abdbbfbe1d6715ce478ce08fa814c4aaf78614d5 +size 110283 diff --git a/images/Shaft_03056.png b/images/Shaft_03056.png new file mode 100644 index 0000000000000000000000000000000000000000..ab6e5368443ec01c9b9493f7dfe7c51677f1862c --- /dev/null +++ b/images/Shaft_03056.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0b6de85e08fe2dce4f04534be94d06e976a3810760273b7453ddbcea12bb391 +size 82949 diff --git a/images/Shaft_03057.png b/images/Shaft_03057.png new file mode 100644 index 0000000000000000000000000000000000000000..80f729b753f995d12055000c9b741183027233ba --- /dev/null +++ b/images/Shaft_03057.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:450734e12a16afbb31b9e877fd5dad65f21500750210277e7b836cbb0c3dbf8e +size 66763 diff --git a/images/Shaft_03058.png b/images/Shaft_03058.png new file mode 100644 index 0000000000000000000000000000000000000000..c745dc2d874b5df45d3bb7e082394c6d7f7b5a6a --- /dev/null +++ b/images/Shaft_03058.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7334f78b0ed5fe0c93a4e97851dd6f90ea5e4a8aa9c1be235eef3788e919a22a +size 76522 diff --git a/images/Shaft_03059.png b/images/Shaft_03059.png new file mode 100644 index 0000000000000000000000000000000000000000..ee7d02df9b818082f6445e59e3d03f00194311b5 --- /dev/null +++ b/images/Shaft_03059.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25416f20ef043732a4fe64f069bfe48e7edd8ffed7274506d33b178a8fa57ed8 +size 80758 diff --git a/images/Shaft_03060.png b/images/Shaft_03060.png new file mode 100644 index 0000000000000000000000000000000000000000..ea7244352c97e4ae1d7d9ef7f0d5a7c920e96f8a --- /dev/null +++ b/images/Shaft_03060.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b11766d93707c7a1ee35527981ceed758f0fe6abeff6a75bb5910d3752e6ce0e +size 91816 diff --git a/images/Shaft_03061.png b/images/Shaft_03061.png new file mode 100644 index 0000000000000000000000000000000000000000..ac8475c9fdef078e693c0bba121ec60c7079cd69 --- /dev/null +++ b/images/Shaft_03061.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2909458164d808decef81e243468021a1fff0553cda933cd7c3d7467082ed4c9 +size 70282 diff --git a/images/Shaft_03062.png b/images/Shaft_03062.png new file mode 100644 index 0000000000000000000000000000000000000000..71bd3d812743a9720b39f424e6525ca0a85ee639 --- /dev/null +++ b/images/Shaft_03062.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1364ac20a085662e225ee2d4f11b1f2a8331ead522398d892215bea1f732e83 +size 112865 diff --git a/images/Shaft_03063.png b/images/Shaft_03063.png new file mode 100644 index 0000000000000000000000000000000000000000..df802ec27440ada00c5bf05b76fc380dcbc4f453 --- /dev/null +++ b/images/Shaft_03063.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edd56feed5b3d4514590153f46789fcbbced7b2bfb7137e30b36dabe84236e06 +size 82531 diff --git a/images/Shaft_03064.png b/images/Shaft_03064.png new file mode 100644 index 0000000000000000000000000000000000000000..e0260f47e6a29093791eb8a1a5a45d2f557fa52a --- /dev/null +++ b/images/Shaft_03064.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48f0a4589d52b8db3be63d666a38080c0cd8b6e40a0cc55f6c3800172c3fd485 +size 100303 diff --git a/images/Shaft_03065.png b/images/Shaft_03065.png new file mode 100644 index 0000000000000000000000000000000000000000..190e709c94e065140435736338fd1cadef50d495 --- /dev/null +++ b/images/Shaft_03065.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9ddf4123a7aea0055ab03db755ef504bf3d3f4490b78da5c4f760b3523bf959 +size 87579 diff --git a/images/Shaft_03066.png b/images/Shaft_03066.png new file mode 100644 index 0000000000000000000000000000000000000000..ef3ffe90c6d2278cd17a79a2f721938d5ea18fd0 --- /dev/null +++ b/images/Shaft_03066.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f20d2350564d0ebe5b430cb7737a7e851ea9a7e7c640ae61cbf2b0d6c1d2d277 +size 101866 diff --git a/images/Shaft_03067.png b/images/Shaft_03067.png new file mode 100644 index 0000000000000000000000000000000000000000..787cbbecb1fb1b90ab2c60443bcf9063fbbddab8 --- /dev/null +++ b/images/Shaft_03067.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0a56e64b1d73c014bf739e2a3ff1d343635f1e3553fe9b854a024dab321c366 +size 97497 diff --git a/images/Shaft_03068.png b/images/Shaft_03068.png new file mode 100644 index 0000000000000000000000000000000000000000..4c3bc8d1df9ba86eed9934a3b9ef9c8425ad2de1 --- /dev/null +++ b/images/Shaft_03068.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6a96f1610a8a96c0ec148de36e14644746a869365263fededc18bdf58ab2210 +size 89955 diff --git a/images/Shaft_03069.png b/images/Shaft_03069.png new file mode 100644 index 0000000000000000000000000000000000000000..f4946ac07333543780333e6d90a08cfd52cdf213 --- /dev/null +++ b/images/Shaft_03069.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b4cc04ab218726413fc5d3262d06b8cd86cdd5cb6b9cdd30fd1a48abf894863 +size 70811 diff --git a/images/Shaft_03070.png b/images/Shaft_03070.png new file mode 100644 index 0000000000000000000000000000000000000000..a054afb6c337e67701c1a1b74d99b1c1071fa894 --- /dev/null +++ b/images/Shaft_03070.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7044f9b100b391f044bf35438ac2ff6148141ce6982247f58becc30c9e12bf6 +size 73691 diff --git a/images/Shaft_03071.png b/images/Shaft_03071.png new file mode 100644 index 0000000000000000000000000000000000000000..96bb6af0ced89c27d0148fd759dfe92e404b78d8 --- /dev/null +++ b/images/Shaft_03071.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0acf21c8d6c5b557881c20d7d88382f0167af6b55bdadd16ab343488d0deef98 +size 91183 diff --git a/images/Shaft_03072.png b/images/Shaft_03072.png new file mode 100644 index 0000000000000000000000000000000000000000..e6fa0338aa0aa58a4131ed9db2779bf024b4ebfd --- /dev/null +++ b/images/Shaft_03072.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ead844874073b6f8a95faab1c5ebc57106159f8fbff4d7b7e9418728323a9f9 +size 81506 diff --git a/images/Shaft_03073.png b/images/Shaft_03073.png new file mode 100644 index 0000000000000000000000000000000000000000..898580296a853ab5849cc1da499e9cea3370a236 --- /dev/null +++ b/images/Shaft_03073.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ee36907444963a2d29d17f46337d11b15fec80c8ce5c0b74f4b9755187004ed +size 103967 diff --git a/images/Shaft_03074.png b/images/Shaft_03074.png new file mode 100644 index 0000000000000000000000000000000000000000..a7040ffd7fe44c1a756e26589978a0d5fa97f95c --- /dev/null +++ b/images/Shaft_03074.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6befb598da20e5ea21f45542a8e39a7163e1f3731c04c46774b2048ae8ae86fe +size 76016 diff --git a/images/Shaft_03075.png b/images/Shaft_03075.png new file mode 100644 index 0000000000000000000000000000000000000000..d540a2ff388e8f1339efcb40bef3a8aece38de55 --- /dev/null +++ b/images/Shaft_03075.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b94df50e8b3c1daeea51f45b675b12fd9c548c6dc2ef9b6a76a9946fbfb60bb +size 83310 diff --git a/images/Shaft_03076.png b/images/Shaft_03076.png new file mode 100644 index 0000000000000000000000000000000000000000..f91dc83140e82fce6fee0ddc06adb55bd7ef41d0 --- /dev/null +++ b/images/Shaft_03076.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf3e2a31f7c9076e917b600e7527ed5b59e6056032f70d5cd88f72d4eaf834c0 +size 73314 diff --git a/images/Shaft_03077.png b/images/Shaft_03077.png new file mode 100644 index 0000000000000000000000000000000000000000..536b43be11957d7a2d2b101013f63dff09360027 --- /dev/null +++ b/images/Shaft_03077.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c2a6538de2c2b1bae313625899b0cf8fcbb4122263ac9b740faefc9f712fd27 +size 89300 diff --git a/images/Shaft_03078.png b/images/Shaft_03078.png new file mode 100644 index 0000000000000000000000000000000000000000..349408ee45ac5e9512c681f40eaeeae928a24d6a --- /dev/null +++ b/images/Shaft_03078.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5d26f1eaa9ecaf8b27c00c0b199f1544abffe09e76474c6afcd1b60db1db8a5 +size 100469 diff --git a/images/Shaft_03079.png b/images/Shaft_03079.png new file mode 100644 index 0000000000000000000000000000000000000000..e43f463b1b81986e4b0dc163e255f056c64f92dc --- /dev/null +++ b/images/Shaft_03079.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1848c73cbb376a2f1f39f6b0e4baa48e20757c8aaf529068037f2e46c3250f8 +size 76238 diff --git a/images/Shaft_03080.png b/images/Shaft_03080.png new file mode 100644 index 0000000000000000000000000000000000000000..a53229ed3b7599212319e661f78d56d6d644bcf0 --- /dev/null +++ b/images/Shaft_03080.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a64491a436f454497883e64b6f93375ee02e0c004e6f01ea0588fd03ca9df92 +size 94546 diff --git a/images/Shaft_03081.png b/images/Shaft_03081.png new file mode 100644 index 0000000000000000000000000000000000000000..6b68e04ada0746b878334033bdbc6e5c9163f964 --- /dev/null +++ b/images/Shaft_03081.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbb58095e0c75896a2ba923225d44982f8a28a235e96f4b8ab85f29842ed012f +size 98748 diff --git a/images/Shaft_03082.png b/images/Shaft_03082.png new file mode 100644 index 0000000000000000000000000000000000000000..9c457d979f215f175ee49300677ec1c37b59733a --- /dev/null +++ b/images/Shaft_03082.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f327cff0653147bb7fb06a82fa3ecbe0c857103655935c6f71e3d96d82dc2252 +size 88994 diff --git a/images/Shaft_03083.png b/images/Shaft_03083.png new file mode 100644 index 0000000000000000000000000000000000000000..fca226c8fec02a4a8333872c4f5cce93ff865fd9 --- /dev/null +++ b/images/Shaft_03083.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f54ca2da05aaa5526e7b94bdd5e64a9ceedc7107f21fd8b840b89bc32efcb81b +size 87855 diff --git a/images/Shaft_03084.png b/images/Shaft_03084.png new file mode 100644 index 0000000000000000000000000000000000000000..bda6e2a302df658cc900e267c5d1d6d3b1c2031a --- /dev/null +++ b/images/Shaft_03084.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:239e8ae6655e519391a97ddadb7701bcd24da26df69e895114c217aacb6c8a18 +size 79927 diff --git a/images/Shaft_03085.png b/images/Shaft_03085.png new file mode 100644 index 0000000000000000000000000000000000000000..67273b8c0acdb7f6f0286a117c95408570ca6160 --- /dev/null +++ b/images/Shaft_03085.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d16945a70b48b9370ad259934ec6bbb8322b603de123019893f782d3b4855ee1 +size 91318 diff --git a/images/Shaft_03086.png b/images/Shaft_03086.png new file mode 100644 index 0000000000000000000000000000000000000000..3c55f667de0ff315dc7b7a1326ab761ee79a86ed --- /dev/null +++ b/images/Shaft_03086.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:002d0feced9adcf43f3ffd681b175509027e766caaed707f6312b4690018071b +size 77478 diff --git a/images/Shaft_03087.png b/images/Shaft_03087.png new file mode 100644 index 0000000000000000000000000000000000000000..d7987741be9db6e9b704b73001280c8a2c3f4ded --- /dev/null +++ b/images/Shaft_03087.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9f1111c43b01ef42a1ced3cfb3a107ae842f9b48ebd4bc3e88ae574927ac71a +size 106581 diff --git a/images/Shaft_03088.png b/images/Shaft_03088.png new file mode 100644 index 0000000000000000000000000000000000000000..a134273c05c7745d1d70eaab4cf4554c7b8f2e6d --- /dev/null +++ b/images/Shaft_03088.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27dacd15e3ade8d6f37092aaa581f9b61a86af6f96b1d8bdd317585389a3cf9c +size 75632 diff --git a/images/Shaft_03089.png b/images/Shaft_03089.png new file mode 100644 index 0000000000000000000000000000000000000000..fea597ea769f6e41249fb4776b23b3226f6d00b0 --- /dev/null +++ b/images/Shaft_03089.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a165e9c57e7497d6a89c848d4196a404980cc127f34745aa39e5173c76acdca1 +size 74086 diff --git a/images/Shaft_03090.png b/images/Shaft_03090.png new file mode 100644 index 0000000000000000000000000000000000000000..299589c2660425f5ce3b76f7146b59935b23ce81 --- /dev/null +++ b/images/Shaft_03090.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12aaf6804bdcf333f0202cf7f40f1b2db35ff50b1d5883df4d00ef3a464f8fe4 +size 99102 diff --git a/images/Shaft_03091.png b/images/Shaft_03091.png new file mode 100644 index 0000000000000000000000000000000000000000..9c527111e54a4d47ee3d2bb414ef98bbf1c62f8e --- /dev/null +++ b/images/Shaft_03091.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:053cea66d04b14ec8ca7596b28733ee5097b753455305185c779bf512f15995f +size 83184 diff --git a/images/Shaft_03092.png b/images/Shaft_03092.png new file mode 100644 index 0000000000000000000000000000000000000000..ef10c2e8279aa69534743f5eaa06d48f90168a31 --- /dev/null +++ b/images/Shaft_03092.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a8b649bdc98a41a51fc0f9275a25416ff38cef5e3725710a4a3e15374528c9f +size 122065 diff --git a/images/Shaft_03093.png b/images/Shaft_03093.png new file mode 100644 index 0000000000000000000000000000000000000000..701dcefc0f3f23955b7994bf140c9a7d5ce2f8ec --- /dev/null +++ b/images/Shaft_03093.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:863fae690db5d2aec8a44f6e3d0d6551c4dbced18b5f8cf5a9ee9387005de247 +size 74077 diff --git a/images/Shaft_03094.png b/images/Shaft_03094.png new file mode 100644 index 0000000000000000000000000000000000000000..c040419b6618c7f283778e9a2e743ca47587e7d0 --- /dev/null +++ b/images/Shaft_03094.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae73fd8438fc049ab040337c8495fe3fb26367317b0d3dd4f1c26875039afc7d +size 75151 diff --git a/images/Shaft_03095.png b/images/Shaft_03095.png new file mode 100644 index 0000000000000000000000000000000000000000..a77da9941a21950bb2a3efc760f284d264500712 --- /dev/null +++ b/images/Shaft_03095.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b73fc27f89e3b69cd7817a66228a9aff60772f8c5c802799d1c4fc5a317c8572 +size 98684 diff --git a/images/Shaft_03096.png b/images/Shaft_03096.png new file mode 100644 index 0000000000000000000000000000000000000000..67189f3f7f752fcaee470f6e6bc54e69102ad1fb --- /dev/null +++ b/images/Shaft_03096.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ab0a974d9ca2ee73cf6ef60236e1060e73fda137431f1a3a7c542e01d3ccc22 +size 87716 diff --git a/images/Shaft_03097.png b/images/Shaft_03097.png new file mode 100644 index 0000000000000000000000000000000000000000..fda6bfdd09e8bdb34629e515a1f97bfedd95e7aa --- /dev/null +++ b/images/Shaft_03097.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91925cd26c50fe5582c5989bd12edae8bf9ae139c82a68a9e8083f079a8e5832 +size 107149 diff --git a/images/Shaft_03098.png b/images/Shaft_03098.png new file mode 100644 index 0000000000000000000000000000000000000000..a8027c8e67bd6c9190135948381e7f1e212fb0cc --- /dev/null +++ b/images/Shaft_03098.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b98f1bb7a48d0dce9683090d66eb27046b4e078534f7d9754701282e6b8a5ae +size 71465 diff --git a/images/Shaft_03099.png b/images/Shaft_03099.png new file mode 100644 index 0000000000000000000000000000000000000000..5df3e5a380dae6533127d933dc85687edd9b17ad --- /dev/null +++ b/images/Shaft_03099.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:468373c29076108b5b1a5f17cf50eb672ff0ce6ab948ad54e637fb96a20ae62e +size 89136 diff --git a/images/Shaft_03100.png b/images/Shaft_03100.png new file mode 100644 index 0000000000000000000000000000000000000000..5180194e06e145e320a18fca016f374407adcd01 --- /dev/null +++ b/images/Shaft_03100.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f31eb7cffa07160d5d35e7993e49d0388448e02894e97f8893009f72a642610 +size 85867 diff --git a/images/Shaft_03101.png b/images/Shaft_03101.png new file mode 100644 index 0000000000000000000000000000000000000000..e523565421506353734e5b854a2061b54b84739a --- /dev/null +++ b/images/Shaft_03101.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:92500eceb347676690cde5ef9e3d4cc110e60e36aa644f4e978f9e14098eaf79 +size 78031 diff --git a/images/Shaft_03102.png b/images/Shaft_03102.png new file mode 100644 index 0000000000000000000000000000000000000000..8aca2fae224b36cc43a0d305c656c4dd251d4d38 --- /dev/null +++ b/images/Shaft_03102.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:330598eeef572a640644552c94b8369bb521f7c52fadf6eca027a3f680c01861 +size 92477 diff --git a/images/Shaft_03103.png b/images/Shaft_03103.png new file mode 100644 index 0000000000000000000000000000000000000000..84627dfc2b0bebe613f8dadfc163cedd561002ca --- /dev/null +++ b/images/Shaft_03103.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6993a39b9aaa6d25f264562301d1d608c04815c79fcf7b7326ad7501fd0c090e +size 115340 diff --git a/images/Shaft_03104.png b/images/Shaft_03104.png new file mode 100644 index 0000000000000000000000000000000000000000..d6780822cc0e1e7e388d380eefb15f8e5b770425 --- /dev/null +++ b/images/Shaft_03104.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3df9ffe271e7fbc387e89c1a7af2310ac33c6aba2678788cc21c67b003e490e5 +size 90009 diff --git a/images/Shaft_03105.png b/images/Shaft_03105.png new file mode 100644 index 0000000000000000000000000000000000000000..88ed2eebb86deaa58c58387499c0a9f4490500a4 --- /dev/null +++ b/images/Shaft_03105.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:173ff03524ab90850d39cffe6ab97a4157f88b4882433d7c3db1cb57ecfb4e91 +size 85461 diff --git a/images/Shaft_03106.png b/images/Shaft_03106.png new file mode 100644 index 0000000000000000000000000000000000000000..6f118b8d60a8b4048f74aa2bb61a68a15f591953 --- /dev/null +++ b/images/Shaft_03106.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea7351b621bfeffb12a4523aff7bb175f38926c96b547c32ea1c697f6c00fcd2 +size 79058 diff --git a/images/Shaft_03107.png b/images/Shaft_03107.png new file mode 100644 index 0000000000000000000000000000000000000000..fffce7e4e389deee0986852b4f8598c551ee159c --- /dev/null +++ b/images/Shaft_03107.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5d1d0e2662179dc3be099ff8889131d63c554cf6ec3e57a71a5a9686c9f2972 +size 95264 diff --git a/images/Shaft_03108.png b/images/Shaft_03108.png new file mode 100644 index 0000000000000000000000000000000000000000..1b90ddb1c7549a73bf34e18593fdfc153d06fe88 --- /dev/null +++ b/images/Shaft_03108.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f49678d1674e5e34a0add56bccd3c450ec1a31c3f180741e0853bf7d353f2103 +size 73399 diff --git a/images/Shaft_03109.png b/images/Shaft_03109.png new file mode 100644 index 0000000000000000000000000000000000000000..684ee894ffc34676bae7c3fd922c20675f078551 --- /dev/null +++ b/images/Shaft_03109.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4af68d7a3faedfa2f00be41b09426b698ec0e30c4eb00688caa4bb73625447e +size 100644 diff --git a/images/Shaft_03110.png b/images/Shaft_03110.png new file mode 100644 index 0000000000000000000000000000000000000000..6ffe95751531c3448f2f0d50dffa0f7006964828 --- /dev/null +++ b/images/Shaft_03110.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63b0a20dd7de362bb8d06d190ad7621b5bf1fc42efbaa5df0c5c3d25524136c5 +size 78549 diff --git a/images/Shaft_03111.png b/images/Shaft_03111.png new file mode 100644 index 0000000000000000000000000000000000000000..8e4b37d1553085c36c78ad844fd8152c7ba336bf --- /dev/null +++ b/images/Shaft_03111.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d15cc0759323b2d1332febcb2ee76dff02482c34836ad00b33c973c3596de06 +size 93902 diff --git a/images/Shaft_03112.png b/images/Shaft_03112.png new file mode 100644 index 0000000000000000000000000000000000000000..c4ffaac5e281ab8e2f3b5711cf6e9fccf18d4df4 --- /dev/null +++ b/images/Shaft_03112.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7785c6a867426dd5294d5a513a90b6e3680d39e396e83cda13a09ce4da78d65e +size 78368 diff --git a/images/Shaft_03113.png b/images/Shaft_03113.png new file mode 100644 index 0000000000000000000000000000000000000000..c31ad60ba0748f0adaeb9ce6b58a3dc877899412 --- /dev/null +++ b/images/Shaft_03113.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0515c814adcd644796a78231fc31c676c9983bc121c42fbd6bebb3f25b7bae80 +size 93690 diff --git a/images/Shaft_03114.png b/images/Shaft_03114.png new file mode 100644 index 0000000000000000000000000000000000000000..d99761167a67f8db725f0cf411ccbd5fd7e246cc --- /dev/null +++ b/images/Shaft_03114.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23ce59bf1c66d2903dcf7010d20660c9db2d4a0ad3761d933251855b1239b338 +size 71354 diff --git a/images/Shaft_03115.png b/images/Shaft_03115.png new file mode 100644 index 0000000000000000000000000000000000000000..b740ff72ba72f63d7e3426baceaa9cbdc99d3376 --- /dev/null +++ b/images/Shaft_03115.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:645366707776df87e1492b34d5a2c2a026bf4e6f52a28bb581adfeb9b46b7729 +size 85664 diff --git a/images/Shaft_03116.png b/images/Shaft_03116.png new file mode 100644 index 0000000000000000000000000000000000000000..dcc34e30982c9ce7e363e461b2f2f5a8bf8cd16f --- /dev/null +++ b/images/Shaft_03116.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ca44e3c91b6861184a9df42966c5b9f99428ebbb75d654e3367c9243a0038fd +size 75561 diff --git a/images/Shaft_03117.png b/images/Shaft_03117.png new file mode 100644 index 0000000000000000000000000000000000000000..1449396ab4e9c818effa742ad7563d65965e91c6 --- /dev/null +++ b/images/Shaft_03117.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65394a67687269d4d3d5d6625a5b2c43790d92d3858e19f49ab169a906cd7111 +size 92856 diff --git a/images/Shaft_03118.png b/images/Shaft_03118.png new file mode 100644 index 0000000000000000000000000000000000000000..231d372d8e393279a90347a1b4ed8c92bee35324 --- /dev/null +++ b/images/Shaft_03118.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57b1ed272c5922138c1cbd0eb0359d6de75b9bded07eacb114355dd9abdc7502 +size 82410 diff --git a/images/Shaft_03119.png b/images/Shaft_03119.png new file mode 100644 index 0000000000000000000000000000000000000000..f215d597c7f2ee6337fd07cb367cf5b3846aef2e --- /dev/null +++ b/images/Shaft_03119.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bd5c77e6d6e083139f326d67c847a1837419862a66a4ca4e9540bc060474024 +size 68517 diff --git a/images/Shaft_03120.png b/images/Shaft_03120.png new file mode 100644 index 0000000000000000000000000000000000000000..e4ee41bba69f845b3a2415fb628e8dac3767bd93 --- /dev/null +++ b/images/Shaft_03120.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cbce2b031ca093d9df01a68acecd9e022071ebb0df8569add94a937f90bbd8f +size 74162 diff --git a/images/Shaft_03121.png b/images/Shaft_03121.png new file mode 100644 index 0000000000000000000000000000000000000000..23122d6c50d978cca54faadbbd819bf0590de5db --- /dev/null +++ b/images/Shaft_03121.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb727f468a7bd10e440bb2ce5e3ea28bdc5f040e74a554888fe1eb17ba3dafd7 +size 71341 diff --git a/images/Shaft_03122.png b/images/Shaft_03122.png new file mode 100644 index 0000000000000000000000000000000000000000..05c60d047aec6263c29019ae711bba6974acf571 --- /dev/null +++ b/images/Shaft_03122.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c4e8203a59ed23d3d9b725b7a370db8710207f3beabe78bdb159265c12f56fe +size 73151 diff --git a/images/Shaft_03123.png b/images/Shaft_03123.png new file mode 100644 index 0000000000000000000000000000000000000000..c83fbdc107424e369f73699bd1dec7eb74d5c2c8 --- /dev/null +++ b/images/Shaft_03123.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5e165ac6325c0cff7e9de73403b30676607fb9e2edc552bbab7f4cf5c0087f4 +size 70003 diff --git a/images/Shaft_03124.png b/images/Shaft_03124.png new file mode 100644 index 0000000000000000000000000000000000000000..0b18e071a4675bc0780254da85e51acb2cc8d50b --- /dev/null +++ b/images/Shaft_03124.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26003b9d8900b2eb9c2ae352a63e373e590b8bee26f2c451428010cc9ca11a49 +size 87034 diff --git a/images/Shaft_03125.png b/images/Shaft_03125.png new file mode 100644 index 0000000000000000000000000000000000000000..3ec96594122b53fd45cc86516e996b820669108a --- /dev/null +++ b/images/Shaft_03125.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89db51b9da600d770d0d3aa873ec54974aa4d000b7af06c04cfd5bf4feb0975b +size 95337 diff --git a/images/Shaft_03126.png b/images/Shaft_03126.png new file mode 100644 index 0000000000000000000000000000000000000000..7f3cea47be0e06697762bcced12886ed5412f873 --- /dev/null +++ b/images/Shaft_03126.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1db721acedb42d993fdab5651babd9906cf3514985f67106e5318805bb662e18 +size 110270 diff --git a/images/Shaft_03127.png b/images/Shaft_03127.png new file mode 100644 index 0000000000000000000000000000000000000000..601950fffdfd31382a3fb4af3fa59881f36a433e --- /dev/null +++ b/images/Shaft_03127.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a5b9a1fd20143fecb0af58597a158a96e1d036646cc63201a36c774530e2ad7 +size 77150 diff --git a/images/Shaft_03128.png b/images/Shaft_03128.png new file mode 100644 index 0000000000000000000000000000000000000000..2d917689cf44e125abe08fb4218345b6629f8646 --- /dev/null +++ b/images/Shaft_03128.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b913b9c65c7946b4861ca7b814a457373dc742ea5494df149a00a2038c06d92 +size 81049 diff --git a/images/Shaft_03129.png b/images/Shaft_03129.png new file mode 100644 index 0000000000000000000000000000000000000000..1d95913c929c345471cee55e49791f43d45256bd --- /dev/null +++ b/images/Shaft_03129.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e25af9d00f77d332cc6b4946bc70a8ac96b72343ca1ba4c14a0ca03c39c8f4c1 +size 101848 diff --git a/images/Shaft_03130.png b/images/Shaft_03130.png new file mode 100644 index 0000000000000000000000000000000000000000..78c4c04e2904d5957f45a801afdf11c7831f3f5a --- /dev/null +++ b/images/Shaft_03130.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcdb9b2b2b1665edd893207f28273d27f18dafd8191dfcc1c52b91c84a7cf58d +size 82157 diff --git a/images/Shaft_03131.png b/images/Shaft_03131.png new file mode 100644 index 0000000000000000000000000000000000000000..63c56b9a48fb354d194995e5a8bbbee4b105c321 --- /dev/null +++ b/images/Shaft_03131.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddba92efa83d4c56ed1e969ae107d5666f836e66e994b769cb57085156db6112 +size 82444 diff --git a/images/Shaft_03132.png b/images/Shaft_03132.png new file mode 100644 index 0000000000000000000000000000000000000000..e0f6f0172f0e4f98dcf947350a7c2c888c310447 --- /dev/null +++ b/images/Shaft_03132.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12fd99d6082c2e0c27aae053921f044f0e57d7a8859c44b168df1b09f6f91e21 +size 89327 diff --git a/images/Shaft_03133.png b/images/Shaft_03133.png new file mode 100644 index 0000000000000000000000000000000000000000..973ffe3ee55f2a9375973802991674033f054fde --- /dev/null +++ b/images/Shaft_03133.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba46ac619cd0c473b1a826d8876378067c341774cc0b98476fdbcbc088d070f7 +size 87295 diff --git a/images/Shaft_03134.png b/images/Shaft_03134.png new file mode 100644 index 0000000000000000000000000000000000000000..63d4b81682568e9fa37eb57b4e54663d3470ddbb --- /dev/null +++ b/images/Shaft_03134.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f81ae55039b01eaf398f10b00e2a7030aa4120e78b51e9b6e1bf84ccdf13a3ad +size 91923 diff --git a/images/Shaft_03135.png b/images/Shaft_03135.png new file mode 100644 index 0000000000000000000000000000000000000000..65e97a12ff37df85beb87123f4789f63e6ed9181 --- /dev/null +++ b/images/Shaft_03135.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:794a87a0f7b81739ad59919d65134b6ca5f9cec5ef72a2767315610d98319de2 +size 85147 diff --git a/images/Shaft_03136.png b/images/Shaft_03136.png new file mode 100644 index 0000000000000000000000000000000000000000..ef73852353f8998e277633d0517662cccdf17e8a --- /dev/null +++ b/images/Shaft_03136.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25eaded005a565e309700178228e50ce84650a1ee4977f3a607a83e0c9d0a074 +size 77443 diff --git a/images/Shaft_03137.png b/images/Shaft_03137.png new file mode 100644 index 0000000000000000000000000000000000000000..bd01d0eb849074a6d6531a8cbe5e239f3d63d3a2 --- /dev/null +++ b/images/Shaft_03137.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce080596ddbda82c05189a5a640bda09068bac1384becf37822d94bb4c7ff4d0 +size 72284 diff --git a/images/Shaft_03138.png b/images/Shaft_03138.png new file mode 100644 index 0000000000000000000000000000000000000000..49ed1650c6699ef43dafcb7573cad24ebb84493e --- /dev/null +++ b/images/Shaft_03138.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:655ffc7175c223b4a94c62bb6f2bda7fc9156d05f7aa3620a54d391767f776a6 +size 84593 diff --git a/images/Shaft_03139.png b/images/Shaft_03139.png new file mode 100644 index 0000000000000000000000000000000000000000..e127cfc91c32ef07f5ea28aa714060c742f925dc --- /dev/null +++ b/images/Shaft_03139.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42c3834af125e5e6d63d753f22aa57632ef58bb0040d45cc64d9c6668d17af72 +size 92006 diff --git a/images/Shaft_03140.png b/images/Shaft_03140.png new file mode 100644 index 0000000000000000000000000000000000000000..6fd40f958e4a9ace06e26ebfe9279bb22cd8d202 --- /dev/null +++ b/images/Shaft_03140.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04c08ab5ecae71325e8a5fbb45eef4f9d9c665277244f522e72287a847f15505 +size 72396 diff --git a/images/Shaft_03141.png b/images/Shaft_03141.png new file mode 100644 index 0000000000000000000000000000000000000000..e6a054461064179acdf8144c70166c20bd903564 --- /dev/null +++ b/images/Shaft_03141.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0152654c152fc7ac59e571c97d84e147f79286867641ff3d87df21a0db3ec91e +size 76338 diff --git a/images/Shaft_03142.png b/images/Shaft_03142.png new file mode 100644 index 0000000000000000000000000000000000000000..089b91237f3d3c502bd12c9e9d2c4550ca2daf06 --- /dev/null +++ b/images/Shaft_03142.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a1d9bb375296bd0ad3d677e042720ef9eb6fe0e2306a9bc54c0263e0a7e752b +size 75178 diff --git a/images/Shaft_03143.png b/images/Shaft_03143.png new file mode 100644 index 0000000000000000000000000000000000000000..fe2a23bb8b14af14fc3b7e670b12058d6501d726 --- /dev/null +++ b/images/Shaft_03143.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:614022519a73cbb0a0f953b0bcb422f78b5e81652328f7af420017fcf5d83d56 +size 76328 diff --git a/images/Shaft_03144.png b/images/Shaft_03144.png new file mode 100644 index 0000000000000000000000000000000000000000..91e10e931c022bf3467a83508b211398aa4bb09a --- /dev/null +++ b/images/Shaft_03144.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02dab137682a69fcba43362419a86263805b606c69d285bae8b03308b8d04b8f +size 109994 diff --git a/images/Shaft_03145.png b/images/Shaft_03145.png new file mode 100644 index 0000000000000000000000000000000000000000..3e7a1e031e84131767fa24080d3958dbc302aed1 --- /dev/null +++ b/images/Shaft_03145.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b19cf4b9354e1af2152ee794c1644e60cf83bc8e4a5dcd30c3f73dc4ded0b78b +size 70903 diff --git a/images/Shaft_03146.png b/images/Shaft_03146.png new file mode 100644 index 0000000000000000000000000000000000000000..0b217a67c306ef2887c09d90a8bc8c9030fffd4e --- /dev/null +++ b/images/Shaft_03146.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18221d179bc4937a51a7161f8fcd29204e39bfc5096598a533601ec40409346c +size 90443 diff --git a/images/Shaft_03147.png b/images/Shaft_03147.png new file mode 100644 index 0000000000000000000000000000000000000000..435404b6991e823abd00f141b9fa55a192dee6f1 --- /dev/null +++ b/images/Shaft_03147.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d7bf37f89a7a970ee1c9df3423c0d462aed550b9bf4b7801fefb40b4c0d8254 +size 93515 diff --git a/images/Shaft_03148.png b/images/Shaft_03148.png new file mode 100644 index 0000000000000000000000000000000000000000..2da74ff1608a05349fa00bfb56d242c2ed254ab9 --- /dev/null +++ b/images/Shaft_03148.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02fb067e9b4be257d3308c368e306545aef86f322435fcc2b1d488c8b2e5aeff +size 86920 diff --git a/images/Shaft_03149.png b/images/Shaft_03149.png new file mode 100644 index 0000000000000000000000000000000000000000..1f26116a765524ae6105c28359beec91f52493ce --- /dev/null +++ b/images/Shaft_03149.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:147773ee5f71b7df7863aff28469eef9e1cf8e4469f59aaa5ee243eff4a95460 +size 81640 diff --git a/images/Shaft_03150.png b/images/Shaft_03150.png new file mode 100644 index 0000000000000000000000000000000000000000..781b4c13c0fea286a988068ddb470e75bf565e85 --- /dev/null +++ b/images/Shaft_03150.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f27116d7c94da584ba2748dce3cdacfd2d128570e89c6723ffc3a6ab2647376b +size 92825 diff --git a/images/Shaft_03151.png b/images/Shaft_03151.png new file mode 100644 index 0000000000000000000000000000000000000000..cd74a74f71d75cad740ce24dc75994e7ba1f5459 --- /dev/null +++ b/images/Shaft_03151.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ffc683179eec40fece48497993579bf5b7187d6256665b1509c127c9208a0a3 +size 102954 diff --git a/images/Shaft_03152.png b/images/Shaft_03152.png new file mode 100644 index 0000000000000000000000000000000000000000..6ce3aafc6617d6685ff5d0558c2e06233aab676b --- /dev/null +++ b/images/Shaft_03152.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba83e80d92700983244a6e985bdb1d9cabcce7529e3d98e666b0496475800ffe +size 105722 diff --git a/images/Shaft_03153.png b/images/Shaft_03153.png new file mode 100644 index 0000000000000000000000000000000000000000..49da9c6d0c2a07be3cb6bfde956f830c7b61be34 --- /dev/null +++ b/images/Shaft_03153.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d077e1bd7b4203b7748e7728c72e91052c1dc9aa38604191e248d6ea09fb0b23 +size 83175 diff --git a/images/Shaft_03154.png b/images/Shaft_03154.png new file mode 100644 index 0000000000000000000000000000000000000000..b0f19bcbb092b99f450b4fa4a4bc446a565daaaf --- /dev/null +++ b/images/Shaft_03154.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:003e0ad8f1577f4deb43169ba0ee438b356772b83d0ae2d454ffaae76d09864e +size 90432 diff --git a/images/Shaft_03155.png b/images/Shaft_03155.png new file mode 100644 index 0000000000000000000000000000000000000000..ecb58db56299803b6354dd8b688b1833f903aff6 --- /dev/null +++ b/images/Shaft_03155.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:012e1e21c61212708497960e2968318946f68c5436c3fa75e98ce5002252c3f0 +size 81497 diff --git a/images/Shaft_03156.png b/images/Shaft_03156.png new file mode 100644 index 0000000000000000000000000000000000000000..adc6df0d8c86e75fd0a727bb564f7895f72e7e3e --- /dev/null +++ b/images/Shaft_03156.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e3bb650d5f3aa298637090dd71038dfccc24ad6838f089f741cb0134048731b +size 87990 diff --git a/images/Shaft_03157.png b/images/Shaft_03157.png new file mode 100644 index 0000000000000000000000000000000000000000..4a99198d314d619d3cf5f192854b25fe784e41be --- /dev/null +++ b/images/Shaft_03157.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:498299776790d8fe1bc239485e8f64dcb0b891dc91aa95367814bb113837d115 +size 114340 diff --git a/images/Shaft_03158.png b/images/Shaft_03158.png new file mode 100644 index 0000000000000000000000000000000000000000..a6ec84eab0f054ffbfcf3f044ee9345f794f3244 --- /dev/null +++ b/images/Shaft_03158.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b312df0129b1394370d2a0902e59c45b5a36acf94d239733fad62d0bf24d10d3 +size 82398 diff --git a/images/Shaft_03159.png b/images/Shaft_03159.png new file mode 100644 index 0000000000000000000000000000000000000000..e8697c3e42d6beae9a3bfe6348a0dad9898d509d --- /dev/null +++ b/images/Shaft_03159.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0a68a81081bbcb08b9c4d0d6bb542972c963fce7d3bf23a9a8322624f046cfd +size 86047 diff --git a/images/Shaft_03160.png b/images/Shaft_03160.png new file mode 100644 index 0000000000000000000000000000000000000000..3ee0798dd88ac1600b354821f73bd8d3a75446cb --- /dev/null +++ b/images/Shaft_03160.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e0cb143cfe4a498aa16b9d12300165834f2b112a8dff006fd9d26b1adaf8bde +size 77571 diff --git a/images/Shaft_03161.png b/images/Shaft_03161.png new file mode 100644 index 0000000000000000000000000000000000000000..36595219efbf67b43735442ec2c53f50a5a38e3b --- /dev/null +++ b/images/Shaft_03161.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e201976dcd9bc91aeb9ffca61da7789297e6f49092c7b79607e3763b39f7806 +size 72056 diff --git a/images/Shaft_03162.png b/images/Shaft_03162.png new file mode 100644 index 0000000000000000000000000000000000000000..88a36011afa6642da391340bb7fc9c5682ad040a --- /dev/null +++ b/images/Shaft_03162.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73150b23d91b450c6c08c03ba680995706f9576ac3b08d93e3f469a46cc94391 +size 84650 diff --git a/images/Shaft_03163.png b/images/Shaft_03163.png new file mode 100644 index 0000000000000000000000000000000000000000..8273b9c66652fe6cfa0ae38d94714c2b1945bd6b --- /dev/null +++ b/images/Shaft_03163.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fb707ae97b8a1fd92f6c396e2d777deebd61535b32e6adf9768c14b5b0092f4 +size 83794 diff --git a/images/Shaft_03164.png b/images/Shaft_03164.png new file mode 100644 index 0000000000000000000000000000000000000000..7d5e08c2cdd3599d349daa51736435135b87c1fc --- /dev/null +++ b/images/Shaft_03164.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c4bbfc5f63ce59db9cdc952243cbff037f9bc9a772aa08d4594ad53ac288edc +size 90957 diff --git a/images/Shaft_03165.png b/images/Shaft_03165.png new file mode 100644 index 0000000000000000000000000000000000000000..b3c72fa16a5ff0ca92d3770b98535dffed3a6132 --- /dev/null +++ b/images/Shaft_03165.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4853c161db76cd5dc19c0a6a67dea3ac5d0ab521c6ee49e32d07d19c085153f0 +size 82437 diff --git a/images/Shaft_03166.png b/images/Shaft_03166.png new file mode 100644 index 0000000000000000000000000000000000000000..27af3f43b94495826a425ec827ea3a09654c4479 --- /dev/null +++ b/images/Shaft_03166.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a257e4bd998bd7653226b55ee0c46f0ec602fd8765b718ab24c30f388aacb01 +size 72310 diff --git a/images/Shaft_03167.png b/images/Shaft_03167.png new file mode 100644 index 0000000000000000000000000000000000000000..5dacefa292a562d1c74a851d6708b959eb50ec63 --- /dev/null +++ b/images/Shaft_03167.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1aa02aa593e87c9a2e34dbf075c7d65bc85b8707d798da3b881c1eb02f721ff +size 88218 diff --git a/images/Shaft_03168.png b/images/Shaft_03168.png new file mode 100644 index 0000000000000000000000000000000000000000..99de2a36048fa03464ec6ed1aabe5930e5458636 --- /dev/null +++ b/images/Shaft_03168.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e7c6b0e356bc7266cbf99ae2df8fb925d61e58c32afc3d9cb25f2922e6c8543 +size 89317 diff --git a/images/Shaft_03169.png b/images/Shaft_03169.png new file mode 100644 index 0000000000000000000000000000000000000000..48ef8aa8658bd400e3f7fd6454318913c746554e --- /dev/null +++ b/images/Shaft_03169.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9acf9838abf1e84a9955c4a8a50e7138a7fca016f3d6cb0b3af1a8512965f0cb +size 94579 diff --git a/images/Shaft_03170.png b/images/Shaft_03170.png new file mode 100644 index 0000000000000000000000000000000000000000..9dc12754db32d564c4d678955883c1565c7708ac --- /dev/null +++ b/images/Shaft_03170.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80d65dee11917b7ad8e687740fb0fec2cd1089da30273d6e9ffd6e854e23f19d +size 92824 diff --git a/images/Shaft_03171.png b/images/Shaft_03171.png new file mode 100644 index 0000000000000000000000000000000000000000..4ecd6926c79848a931cbfb7c3cc330979ad27a6a --- /dev/null +++ b/images/Shaft_03171.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51a97d954daed5e3dc138a67c65af4746f1bd0fbe8b824675b31cc324f6961c8 +size 73223 diff --git a/images/Shaft_03172.png b/images/Shaft_03172.png new file mode 100644 index 0000000000000000000000000000000000000000..317290f31d03f07464e1f38699e1bc68dbbe7675 --- /dev/null +++ b/images/Shaft_03172.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52fa5c634a8370fab7dad0ff4aebb6ddb099aeae90b5613e0726ad3202bacf2c +size 82109 diff --git a/images/Shaft_03173.png b/images/Shaft_03173.png new file mode 100644 index 0000000000000000000000000000000000000000..a24ed16f2c188cf4ac33ef47d453d9064adc5655 --- /dev/null +++ b/images/Shaft_03173.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75f58c3ca9564da7d0b5c583300205ae6cbf2c9fccb8a651337f555bf87dd0d5 +size 103769 diff --git a/images/Shaft_03174.png b/images/Shaft_03174.png new file mode 100644 index 0000000000000000000000000000000000000000..2d63d7f5e7c8f4c0110258a31036d2d480d40dfd --- /dev/null +++ b/images/Shaft_03174.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:009ef01dd99d1681f62f7260f4f0271b02094a7d5b84d7e889db654266f2937a +size 82601 diff --git a/images/Shaft_03175.png b/images/Shaft_03175.png new file mode 100644 index 0000000000000000000000000000000000000000..c35e7f51558f285d0b980e4a13390987f0b30efd --- /dev/null +++ b/images/Shaft_03175.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d2b1541c5478e752d1260b2c661426dc98c71229b38e17dd511ac3435adabd0 +size 70006 diff --git a/images/Shaft_03176.png b/images/Shaft_03176.png new file mode 100644 index 0000000000000000000000000000000000000000..773eea5006f6572cd1d16bca26c3375e0cad2503 --- /dev/null +++ b/images/Shaft_03176.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b487a1dc83d5616543cdcc157385322685713f499212cad90f64269dd6206e46 +size 77820 diff --git a/images/Shaft_03177.png b/images/Shaft_03177.png new file mode 100644 index 0000000000000000000000000000000000000000..9b0daeee5bd2e96c2a730563c1a3513c30f4ed32 --- /dev/null +++ b/images/Shaft_03177.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c900d3e38d587eaa261cfd81b96f088400826762e084a59f1efdfb608e45382b +size 86717 diff --git a/images/Shaft_03178.png b/images/Shaft_03178.png new file mode 100644 index 0000000000000000000000000000000000000000..44c8b07b83404d881a00cf095bf29715c1ca11bf --- /dev/null +++ b/images/Shaft_03178.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:303ea8ff03a8161788a5d204c121dcbe067b6a0a6284dfec22bf4ea4f479f160 +size 99087 diff --git a/images/Shaft_03179.png b/images/Shaft_03179.png new file mode 100644 index 0000000000000000000000000000000000000000..7c151d56781906a32dcc78712e06d171d8f234cc --- /dev/null +++ b/images/Shaft_03179.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecf9a0bdc48689a5356c217279b7125a461253817aab6f89bae6ea053ebe9b69 +size 68441 diff --git a/images/Shaft_03180.png b/images/Shaft_03180.png new file mode 100644 index 0000000000000000000000000000000000000000..29c21e4cb9cf8cb36b013627478edd2ca236f4e9 --- /dev/null +++ b/images/Shaft_03180.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a38f5f721eaf9fb1df764eab8553af0503799cb479f81438fd233180e3db0fa +size 75542 diff --git a/images/Shaft_03181.png b/images/Shaft_03181.png new file mode 100644 index 0000000000000000000000000000000000000000..1f5e6898aeaf5cc86143d6ab7e392e377931e4cd --- /dev/null +++ b/images/Shaft_03181.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f6037339ac1fde8fb5949434a4002239cb4f53ec3342278932348d1b8d05ef0 +size 80931 diff --git a/images/Shaft_03182.png b/images/Shaft_03182.png new file mode 100644 index 0000000000000000000000000000000000000000..90b15acd65ca53221a7908f9e887852d9d54cb2f --- /dev/null +++ b/images/Shaft_03182.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:737963ca5f14248d892fc5ec62937b1e38747b9c9536cf8e2a7813d43b227aad +size 75660 diff --git a/images/Shaft_03183.png b/images/Shaft_03183.png new file mode 100644 index 0000000000000000000000000000000000000000..56d09a770b0fdf38b4f671a53f881f16215d7cd5 --- /dev/null +++ b/images/Shaft_03183.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e09f2dface8caa8f765f5884cc08c565666cf2667d177dfaaab7982c94dc7b2d +size 85793 diff --git a/images/Shaft_03184.png b/images/Shaft_03184.png new file mode 100644 index 0000000000000000000000000000000000000000..1f786d80f638b7ebdc49231e16d542aeffe40783 --- /dev/null +++ b/images/Shaft_03184.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ece533070b26fd6a4626a387912b269864bd6ddbe1b01ae9193cccf8e528445b +size 79628 diff --git a/images/Shaft_03185.png b/images/Shaft_03185.png new file mode 100644 index 0000000000000000000000000000000000000000..95a64890a0bd3f959524d037976e79c6200b13fe --- /dev/null +++ b/images/Shaft_03185.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5c5d5f0f10eb0bb13a8448aa8f77f06880705be5957b962db427e48eb8a8b4b +size 82017 diff --git a/images/Shaft_03186.png b/images/Shaft_03186.png new file mode 100644 index 0000000000000000000000000000000000000000..daa467d5a75314ad994a81ae008ffc035fffe40b --- /dev/null +++ b/images/Shaft_03186.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4fec89da5f715e813fee0f9e34cb07a0335cabc18f01446d586964a48adf0547 +size 90638 diff --git a/images/Shaft_03187.png b/images/Shaft_03187.png new file mode 100644 index 0000000000000000000000000000000000000000..4b518370439f07ff8f890b934d4795285c503d09 --- /dev/null +++ b/images/Shaft_03187.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bdd00ddc22bac95c74c3e4894d8273813fff5dfeb91df003bac51c3bfdd4bd3 +size 68678 diff --git a/images/Shaft_03188.png b/images/Shaft_03188.png new file mode 100644 index 0000000000000000000000000000000000000000..769f35d49e53abeb71d25071083961a6f7e5cd83 --- /dev/null +++ b/images/Shaft_03188.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:963e42e94acafcca21b3f03a55e1dd4c88b971a8949e7d8bf55bf4baed7cf39e +size 68776 diff --git a/images/Shaft_03189.png b/images/Shaft_03189.png new file mode 100644 index 0000000000000000000000000000000000000000..c5a1d60bd49e189dd41b9760a51128120b3ab6f1 --- /dev/null +++ b/images/Shaft_03189.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3855e1f2776c341d63b6f4609d58fad82a9dcd4692756af6d0c22f8e703df37 +size 78799 diff --git a/images/Shaft_03190.png b/images/Shaft_03190.png new file mode 100644 index 0000000000000000000000000000000000000000..83652d6de129f0d8872ce75e13b64c1044e200fd --- /dev/null +++ b/images/Shaft_03190.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f09504867874c0e833cd537fcc42e84cbf5c5cf8100c62cd4303f265a86554cd +size 88045 diff --git a/images/Shaft_03191.png b/images/Shaft_03191.png new file mode 100644 index 0000000000000000000000000000000000000000..ba31b972474cf7247c11fb0574d521c05344b1d9 --- /dev/null +++ b/images/Shaft_03191.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:796578a06fcc7d771218b2fc8bc4e1676042b4904d67171282b82e4e75b4695e +size 84665 diff --git a/images/Shaft_03192.png b/images/Shaft_03192.png new file mode 100644 index 0000000000000000000000000000000000000000..d23ff703d4accc3a7a160b628a1eea45f5331aa5 --- /dev/null +++ b/images/Shaft_03192.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bd023ed193e575504b7aaa2c1a855337ae0862b3e01efc5dbfa2d57caeb64d9 +size 75442 diff --git a/images/Shaft_03193.png b/images/Shaft_03193.png new file mode 100644 index 0000000000000000000000000000000000000000..49648c904566c0ee5078b9a2200bcddfe6bae77d --- /dev/null +++ b/images/Shaft_03193.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7a51919a4f065d3b1ef315476bf743a670b04a7da041c98e1cb5727d0606b27 +size 99557 diff --git a/images/Shaft_03194.png b/images/Shaft_03194.png new file mode 100644 index 0000000000000000000000000000000000000000..96b82f16dc64b077695b9889eb783667b5a8eaf2 --- /dev/null +++ b/images/Shaft_03194.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc2e4043463b0d3da5a9f0d2295556c66b6803b3fdb08c3bd3f2473cd5264e42 +size 97297 diff --git a/images/Shaft_03195.png b/images/Shaft_03195.png new file mode 100644 index 0000000000000000000000000000000000000000..fbf69adfde99df5207ca286a6552ad3032fd56e4 --- /dev/null +++ b/images/Shaft_03195.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69f59eb7a8acdf3cbe46084eea320afcf328acfebf1266f624a7139814129995 +size 85284 diff --git a/images/Shaft_03196.png b/images/Shaft_03196.png new file mode 100644 index 0000000000000000000000000000000000000000..909c221510ed0e46b6a138ea5d655843b08a1888 --- /dev/null +++ b/images/Shaft_03196.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0acca4e197cb5a7eb09a8f96ab58a892d0042143f587ea354a1194fb5233ae1c +size 98867 diff --git a/images/Shaft_03197.png b/images/Shaft_03197.png new file mode 100644 index 0000000000000000000000000000000000000000..99923276aa04c750f218f9e4474a849566cfb96b --- /dev/null +++ b/images/Shaft_03197.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19f26b2657fefbf07929e24f92d336e000fdccec150ba6d8d70340123d520847 +size 91878 diff --git a/images/Shaft_03198.png b/images/Shaft_03198.png new file mode 100644 index 0000000000000000000000000000000000000000..6e622d0aa71c59000327527c8213e4cf8f403416 --- /dev/null +++ b/images/Shaft_03198.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39601a472aa6aa14e7190300752a3355e993cde43ae529852c5f2f0d15d0485b +size 92617 diff --git a/images/Shaft_03199.png b/images/Shaft_03199.png new file mode 100644 index 0000000000000000000000000000000000000000..baa3c065d2e1c083071af9b8637063a29b970a38 --- /dev/null +++ b/images/Shaft_03199.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbc0502299747a831a23be9e352b9b4b51c740092e6fae75b1fdb6f0a7dc39e6 +size 111792 diff --git a/images/Shaft_03200.png b/images/Shaft_03200.png new file mode 100644 index 0000000000000000000000000000000000000000..5700c03d78141913505a1b2cc39eb46d29e64e71 --- /dev/null +++ b/images/Shaft_03200.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53ac51a7ac399449cbbcfad36d22dbe9d11eaa514e4ab69fd1a84cd6a9602640 +size 88402 diff --git a/images/Shaft_03201.png b/images/Shaft_03201.png new file mode 100644 index 0000000000000000000000000000000000000000..5e5729e1a6e71835a8a238ec53525f2d33159fc7 --- /dev/null +++ b/images/Shaft_03201.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:596e42a3a2d25010869003f8f65a9dc625db7597fa16da53893f6066ba6401ff +size 70635 diff --git a/images/Shaft_03202.png b/images/Shaft_03202.png new file mode 100644 index 0000000000000000000000000000000000000000..62f9ca3626cf8fdd122baf04042fcbbd814de69f --- /dev/null +++ b/images/Shaft_03202.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c73d050aa132df6b119f024aafefe03014c7808513a9fe7ea50d35c6fb4f492 +size 88944 diff --git a/images/Shaft_03203.png b/images/Shaft_03203.png new file mode 100644 index 0000000000000000000000000000000000000000..2f5daa58974e689039692e0024eb6c0a09bafdeb --- /dev/null +++ b/images/Shaft_03203.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2db7977a4f17db44b6a68aa9e4169214f9a8085fca6eed6667f4cb8bb2f356eb +size 73687 diff --git a/images/Shaft_03204.png b/images/Shaft_03204.png new file mode 100644 index 0000000000000000000000000000000000000000..8dbba1890497b2958088e20d81b580eaf86368d1 --- /dev/null +++ b/images/Shaft_03204.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f92a5e7c533ed562fa3d5924538fd1b7fd4eeab5f590c394d25c8b361eb7577 +size 88775 diff --git a/images/Shaft_03205.png b/images/Shaft_03205.png new file mode 100644 index 0000000000000000000000000000000000000000..fb0c9394469143b6ebc29c72030c84f1c7701c72 --- /dev/null +++ b/images/Shaft_03205.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ff32d1226667cb4269a42459a47ef1ffe001836da1aebe3186bb51a79a180ec +size 95287 diff --git a/images/Shaft_03206.png b/images/Shaft_03206.png new file mode 100644 index 0000000000000000000000000000000000000000..77c7d52a1737a2407b9406be36cf731f15eec8ab --- /dev/null +++ b/images/Shaft_03206.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:543938e095f0fa26ce24ec5a0c3b5ca6703c323bb4ee9af79b6de6670ebd09f8 +size 80342 diff --git a/images/Shaft_03207.png b/images/Shaft_03207.png new file mode 100644 index 0000000000000000000000000000000000000000..3cdd40151fdcf3b16fcfdf25b19e878b6914241e --- /dev/null +++ b/images/Shaft_03207.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de6efa19279ee566dd4aa79fa8301653e7d005c25dbc231eceb4879a7af25779 +size 101335 diff --git a/images/Shaft_03208.png b/images/Shaft_03208.png new file mode 100644 index 0000000000000000000000000000000000000000..444013cd84b1692a30233ea5b495d857b8355f58 --- /dev/null +++ b/images/Shaft_03208.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7164db117bef09bc72693cd10a149679bbdb2f24f1720c7c2a8ec2ff15be7df4 +size 89166 diff --git a/images/Shaft_03209.png b/images/Shaft_03209.png new file mode 100644 index 0000000000000000000000000000000000000000..0991f3350066a9d74b68d6e6fd3bb297bdc3235a --- /dev/null +++ b/images/Shaft_03209.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b1acd2b09fdd5022e4a84241afa9acb74f69acf45ab79006cab0308d3a05058 +size 84727 diff --git a/images/Shaft_03210.png b/images/Shaft_03210.png new file mode 100644 index 0000000000000000000000000000000000000000..b087cdf6d441d55a4bc4b60b81ca2d9515d4d71d --- /dev/null +++ b/images/Shaft_03210.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bbefaa7b98325f39ebf1b377a1b4991230a833380985a1a45464ccf86544d44 +size 99450 diff --git a/images/Shaft_03211.png b/images/Shaft_03211.png new file mode 100644 index 0000000000000000000000000000000000000000..9fbfefbe52c03c13731dd4eb54d05efd9e7885f9 --- /dev/null +++ b/images/Shaft_03211.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d096c76c50f20ae606044b88e10b86bf348333d12b4deb9f5f5c1e1f08432d0f +size 71301 diff --git a/images/Shaft_03212.png b/images/Shaft_03212.png new file mode 100644 index 0000000000000000000000000000000000000000..03553e85b2502dc5449d50afe88934b583a1a21a --- /dev/null +++ b/images/Shaft_03212.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc0ded6f191874a0459425bf380e4b32e3f89a6f5ac533dd064d70ea53a57630 +size 71856 diff --git a/images/Shaft_03213.png b/images/Shaft_03213.png new file mode 100644 index 0000000000000000000000000000000000000000..33ef0957f2c79f864bddc6dd59f3cad75db65374 --- /dev/null +++ b/images/Shaft_03213.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8430195f6558e30de0ec44f1e0b875f44d9de6b8539fab889abbcfed1e068434 +size 70011 diff --git a/images/Shaft_03214.png b/images/Shaft_03214.png new file mode 100644 index 0000000000000000000000000000000000000000..6313763f6838f93eeeab203f6735a7a8a2cc11a1 --- /dev/null +++ b/images/Shaft_03214.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f923722b42100999e5f994dafb7483111e691919926fd027ef6ba09bfc672b9 +size 86979 diff --git a/images/Shaft_03215.png b/images/Shaft_03215.png new file mode 100644 index 0000000000000000000000000000000000000000..5f3c658dc7f8ec10c5b94987ce75d5bc5774f980 --- /dev/null +++ b/images/Shaft_03215.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04019ed4fd0471a63d15853709759db8f4505fc8f9696fa2d8112dc06ee8477b +size 95462 diff --git a/images/Shaft_03216.png b/images/Shaft_03216.png new file mode 100644 index 0000000000000000000000000000000000000000..719a0890859a2dc0dddd57e0c72a7141d0646be8 --- /dev/null +++ b/images/Shaft_03216.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3430f8b8fc10859b2f2e8eaf56f2934217fed934c807413123b5262238c9146 +size 113187 diff --git a/images/Shaft_03217.png b/images/Shaft_03217.png new file mode 100644 index 0000000000000000000000000000000000000000..9abc84677885b2f92849137480099b2f230e34e8 --- /dev/null +++ b/images/Shaft_03217.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7e4b81c18cbcb2c02e4541817a1b802633fc162cb7899d6eb0bb9ff10d552bd +size 73664 diff --git a/images/Shaft_03218.png b/images/Shaft_03218.png new file mode 100644 index 0000000000000000000000000000000000000000..5f2a4f0ab1c81665c8e899516cc2f165e5461253 --- /dev/null +++ b/images/Shaft_03218.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e24c3f44330b71e340464af9beebfcfd0f13e6741c0f2122578c8a0f1875ec5e +size 70031 diff --git a/images/Shaft_03219.png b/images/Shaft_03219.png new file mode 100644 index 0000000000000000000000000000000000000000..b78b0a4646a72a74de7a31e64fd6fd883f1ad5dc --- /dev/null +++ b/images/Shaft_03219.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32e8ff37735b0d604b65dec4916b8a57974cd140076d4572c867638af928ebd3 +size 79725 diff --git a/images/Shaft_03220.png b/images/Shaft_03220.png new file mode 100644 index 0000000000000000000000000000000000000000..72da2d7eb94f1b7267c9e3e62cd0094717dd6c58 --- /dev/null +++ b/images/Shaft_03220.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f81b00967672397b7a46edc6605109460d6b8e3305b6042f0dfd978f8185c51c +size 83820 diff --git a/images/Shaft_03221.png b/images/Shaft_03221.png new file mode 100644 index 0000000000000000000000000000000000000000..cf57a8c722cec6b90b5f13447ba83c0064999d96 --- /dev/null +++ b/images/Shaft_03221.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a087f1420d3039169324acda5197e31273b74add78d22d4855056cc8d7923dc6 +size 69053 diff --git a/images/Shaft_03222.png b/images/Shaft_03222.png new file mode 100644 index 0000000000000000000000000000000000000000..fcb363a9f60455e9b8b33985da9288d0869782ec --- /dev/null +++ b/images/Shaft_03222.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea5ec07207b09cbf0bd00a180c509fb039ea818478637b9269fa7a4b97b679da +size 111376 diff --git a/images/Shaft_03223.png b/images/Shaft_03223.png new file mode 100644 index 0000000000000000000000000000000000000000..3f77846bb8bb0633aa4102e90ae756174eccf9fb --- /dev/null +++ b/images/Shaft_03223.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb4ffdab12a83172dca75048129571beec623fabf74b090c539386026e3a2493 +size 85726 diff --git a/images/Shaft_03224.png b/images/Shaft_03224.png new file mode 100644 index 0000000000000000000000000000000000000000..a1f9bf0627a8b34d069ffe0cd76a6954e8ca9b41 --- /dev/null +++ b/images/Shaft_03224.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b002a9cfde82a60004a2ec6a99e316a42bbc33c8c4b508dbef296ebef162207 +size 100481 diff --git a/images/Shaft_03225.png b/images/Shaft_03225.png new file mode 100644 index 0000000000000000000000000000000000000000..1f5fbc023f5fac52f0e008945d74e5f13b899465 --- /dev/null +++ b/images/Shaft_03225.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d9e7cfcbe12536d41d2e53859c33acac8d3c5df36b14f2df0f783fa0da78b7c +size 108146 diff --git a/images/Shaft_03226.png b/images/Shaft_03226.png new file mode 100644 index 0000000000000000000000000000000000000000..c2ee8aa4ffcf00bd9ac6b2668c5ab17e3782cb38 --- /dev/null +++ b/images/Shaft_03226.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8149dfb9ba347c5453fcb7f3358685636af45dc8f52703462a0e3420d4be29f5 +size 111959 diff --git a/images/Shaft_03227.png b/images/Shaft_03227.png new file mode 100644 index 0000000000000000000000000000000000000000..1167b67d4eea27847691f585b60c3ee5b6c60609 --- /dev/null +++ b/images/Shaft_03227.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e74bc033ef4590616ef74c7b530b3509167f7014339b410d4ffff1aa157cf93 +size 71752 diff --git a/images/Shaft_03228.png b/images/Shaft_03228.png new file mode 100644 index 0000000000000000000000000000000000000000..751b589d69dba2f0ac610ea7d6d8f3aa6f9c44b5 --- /dev/null +++ b/images/Shaft_03228.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67d4abc7ff61bb22408b481e22a4cc6496032a45e46822f9eefc30ad0247eece +size 104061 diff --git a/images/Shaft_03229.png b/images/Shaft_03229.png new file mode 100644 index 0000000000000000000000000000000000000000..2cf4c586fb3eb3378b439fade5aab5c24c9cc8d1 --- /dev/null +++ b/images/Shaft_03229.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91fc9410fa3f0f18187f7375ce0515e377315dfda0713fdfaeae667a5b3a59a2 +size 81536 diff --git a/images/Shaft_03230.png b/images/Shaft_03230.png new file mode 100644 index 0000000000000000000000000000000000000000..2a5cdd17e71b083c4f517ce015ce536098682da8 --- /dev/null +++ b/images/Shaft_03230.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83cf9245b99f5cc5e784521ae823be2c0e7a2ae6ca4d0a75ec0b0fe601acc27e +size 80912 diff --git a/images/Shaft_03231.png b/images/Shaft_03231.png new file mode 100644 index 0000000000000000000000000000000000000000..3fcf4a1e69f88d5a65139df250f7b641bd176ed0 --- /dev/null +++ b/images/Shaft_03231.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32f206a839948c5aad008a3b9288a40c189db1c6252118f57d593e2fb5a2dcec +size 92820 diff --git a/images/Shaft_03232.png b/images/Shaft_03232.png new file mode 100644 index 0000000000000000000000000000000000000000..ed27bc68f5208721bc76036ad22217cfb426f8ee --- /dev/null +++ b/images/Shaft_03232.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1edea1fae6f1b6a37c7a88b8e4e9508df2227943ab4233278398c30c900eb172 +size 98843 diff --git a/images/Shaft_03233.png b/images/Shaft_03233.png new file mode 100644 index 0000000000000000000000000000000000000000..71e729f3590d31c2892444cbab077eae14ca0abd --- /dev/null +++ b/images/Shaft_03233.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:35faf7798121b8fb0eb9ffcaecdddbf4921172116a5c47eb5f5f6fedac126583 +size 94370 diff --git a/images/Shaft_03234.png b/images/Shaft_03234.png new file mode 100644 index 0000000000000000000000000000000000000000..eb94e98bba6129bcad8b75701eebf3137983792d --- /dev/null +++ b/images/Shaft_03234.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8ff7da17387b9d12020885057af8952390c3e95a1d8ea01de773ac50a30ad71 +size 75883 diff --git a/images/Shaft_03235.png b/images/Shaft_03235.png new file mode 100644 index 0000000000000000000000000000000000000000..2a94cb0e6a6d764400088422287c8e6212bca1b7 --- /dev/null +++ b/images/Shaft_03235.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67b9b7be91bc046450d09cc1eb4a15ece51379649a30b9004e1e3b6c58a39d28 +size 82011 diff --git a/images/Shaft_03236.png b/images/Shaft_03236.png new file mode 100644 index 0000000000000000000000000000000000000000..41a5c9eabdc3c5ec93a42261e6bf8b3b4a72b7df --- /dev/null +++ b/images/Shaft_03236.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9fc9201a8f58b882d23c9fcea363ce8ea5be375486ae44eb74e4f357e78a66d +size 97772 diff --git a/images/Shaft_03237.png b/images/Shaft_03237.png new file mode 100644 index 0000000000000000000000000000000000000000..059f7566e065e4b5cff17dd341d7f98e83b3bc72 --- /dev/null +++ b/images/Shaft_03237.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75de48343c93f726b7b5b36f956e0264b1bb04074ebd0aa765010dc573983b56 +size 82088 diff --git a/images/Shaft_03238.png b/images/Shaft_03238.png new file mode 100644 index 0000000000000000000000000000000000000000..7828808b0f27e4d61f47fbfddb074e2736350126 --- /dev/null +++ b/images/Shaft_03238.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05027c6295ef7f321c17aa93d1fe1367080e945b99176d67b3afceea94c408b4 +size 101236 diff --git a/images/Shaft_03239.png b/images/Shaft_03239.png new file mode 100644 index 0000000000000000000000000000000000000000..5ca4aa8b612c26a4aa92e8e45ffb66044d1f41d9 --- /dev/null +++ b/images/Shaft_03239.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70201e56044efe805ac8439f2c60805f14be88cabcd8b91a6dd5d1e086ea4595 +size 102567 diff --git a/images/Shaft_03240.png b/images/Shaft_03240.png new file mode 100644 index 0000000000000000000000000000000000000000..de946a85b5bbbde7943161dadbd0722ffc0225f1 --- /dev/null +++ b/images/Shaft_03240.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59c2867c3e8819f906721f9b3ef2037fb8802e50eba8ec89f19c1afef298b16f +size 93708 diff --git a/images/Shaft_03241.png b/images/Shaft_03241.png new file mode 100644 index 0000000000000000000000000000000000000000..fbef6589a87e4400aeb2970300324454507ce1ed --- /dev/null +++ b/images/Shaft_03241.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:136c9129e92f412df077b3950270b7ce250c7df34adf6ccffeb179f6082e75b9 +size 69362 diff --git a/images/Shaft_03242.png b/images/Shaft_03242.png new file mode 100644 index 0000000000000000000000000000000000000000..4d56547707d59c96a064f9bbb37b09ef2bf16ead --- /dev/null +++ b/images/Shaft_03242.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84715c23bcfe8b40a34af3cff79caee4d003e089983a6c1ddd6cd53bad5ff318 +size 99136 diff --git a/images/Shaft_03243.png b/images/Shaft_03243.png new file mode 100644 index 0000000000000000000000000000000000000000..b0ae2d00f1a7a6c9062e7b2fb10568d6424595eb --- /dev/null +++ b/images/Shaft_03243.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8061adb99b1950bc56090fe0a28287715651627e5270a40431443b8c72d8030d +size 81951 diff --git a/images/Shaft_03244.png b/images/Shaft_03244.png new file mode 100644 index 0000000000000000000000000000000000000000..2ea3a67f708498894861c58f277306050e57b481 --- /dev/null +++ b/images/Shaft_03244.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd08075a4ff088a44de985c2d18ad5f73f717518c0f31408a3fd8e8fbf628479 +size 79708 diff --git a/images/Shaft_03245.png b/images/Shaft_03245.png new file mode 100644 index 0000000000000000000000000000000000000000..b68601a109a35a86507bb53a7b259fd7e78e4f41 --- /dev/null +++ b/images/Shaft_03245.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:685b565552cb872af223f128e97e45ee37805d5a50cc5a5c3224d2b058a83303 +size 72497 diff --git a/images/Shaft_03246.png b/images/Shaft_03246.png new file mode 100644 index 0000000000000000000000000000000000000000..9276d5b58a4d293c55a2d950d3c3c18b7f117a86 --- /dev/null +++ b/images/Shaft_03246.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d39b210fb5e744d5f385df51a802e6b094a5c1f14edf34951f22ce31b480fe7 +size 84226 diff --git a/images/Shaft_03247.png b/images/Shaft_03247.png new file mode 100644 index 0000000000000000000000000000000000000000..54f50ed4a3210c0d0eaa5c059bb75beba3979da6 --- /dev/null +++ b/images/Shaft_03247.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d69bf856fc2055058bff0507894155bedc3baee2c171daa8f2e15648e026820 +size 85201 diff --git a/images/Shaft_03248.png b/images/Shaft_03248.png new file mode 100644 index 0000000000000000000000000000000000000000..54afa41dc5bc36149b9cc6937245805b2f92efdc --- /dev/null +++ b/images/Shaft_03248.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:299a5cc9dd9b7f737d50fe20ea8dd2e969b8eb9e19f5ce0ddd3f957c3a55a505 +size 116937 diff --git a/images/Shaft_03249.png b/images/Shaft_03249.png new file mode 100644 index 0000000000000000000000000000000000000000..4486b67dbd3d54ceaa7ae19244336f4041718f3d --- /dev/null +++ b/images/Shaft_03249.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09eb18ad21eb400e1a08ae4e2df11acd8ea1c8b8c8b9b60b313997da817d557d +size 86752 diff --git a/images/Shaft_03250.png b/images/Shaft_03250.png new file mode 100644 index 0000000000000000000000000000000000000000..9b0a65344869b89318e14aa0394b3d81e19db33f --- /dev/null +++ b/images/Shaft_03250.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce87f01b388a82ec113e41876e038436c43f39164fe87173a370fd8811edf27f +size 69127 diff --git a/images/Shaft_03251.png b/images/Shaft_03251.png new file mode 100644 index 0000000000000000000000000000000000000000..071bd6add286c20e039af0ba277df4336c294ac3 --- /dev/null +++ b/images/Shaft_03251.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7de0f9cc55559eef4660d1bf2819621741de239cf182833c60fc14fb5c66ab6 +size 84830 diff --git a/images/Shaft_03252.png b/images/Shaft_03252.png new file mode 100644 index 0000000000000000000000000000000000000000..877f7d52def4476f570267e96fac82291477c5c9 --- /dev/null +++ b/images/Shaft_03252.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5074a29151a182992b3dd1ee66acb2886def4de0e11332c68aa454926e05b1fd +size 98337 diff --git a/images/Shaft_03253.png b/images/Shaft_03253.png new file mode 100644 index 0000000000000000000000000000000000000000..98e318aefcda2dd23e0ac175309dbf313d4a2315 --- /dev/null +++ b/images/Shaft_03253.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca3ab64b9a1559f28be9407e0314e61450fa6cc919b1993144fb5d598934b15a +size 95051 diff --git a/images/Shaft_03254.png b/images/Shaft_03254.png new file mode 100644 index 0000000000000000000000000000000000000000..63d9dfdaa9959fa6ea4e5e631e85d02ba9723ce4 --- /dev/null +++ b/images/Shaft_03254.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73d0d8c41333c40e19f31ff27caa76183122de20cc4628f55ada1260955df38e +size 90915 diff --git a/images/Shaft_03255.png b/images/Shaft_03255.png new file mode 100644 index 0000000000000000000000000000000000000000..28b40dd8af08feabc510bcadfa0aa357b6cd78eb --- /dev/null +++ b/images/Shaft_03255.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a67ba335c7ee72082c2b14c1d83425b9ce5df417a48224523e6d7bf9a679884 +size 80043 diff --git a/images/Shaft_03256.png b/images/Shaft_03256.png new file mode 100644 index 0000000000000000000000000000000000000000..c56780daae91c8274057edb0979629216215cf68 --- /dev/null +++ b/images/Shaft_03256.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f262d17b107e45d5b264c95051f51f917e1678e2c79d7617c93eeeba097e899f +size 91666 diff --git a/images/Shaft_03257.png b/images/Shaft_03257.png new file mode 100644 index 0000000000000000000000000000000000000000..23d1a99f0464d0b5e3fd4daaf2432d886cadad35 --- /dev/null +++ b/images/Shaft_03257.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8f5e5de43018e297b92fd312a0e284558c40ffb050259aacdcb6ed2f80d2ef0 +size 74223 diff --git a/images/Shaft_03258.png b/images/Shaft_03258.png new file mode 100644 index 0000000000000000000000000000000000000000..eb995f51e054b94cd3642afd48c09eaeed4359b7 --- /dev/null +++ b/images/Shaft_03258.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:418591cfe6e33e51aa01460f731dfd351069c47b5a4e8974c185b6b082832c4b +size 101259 diff --git a/images/Shaft_03259.png b/images/Shaft_03259.png new file mode 100644 index 0000000000000000000000000000000000000000..6aaee3359678687cd1c17240a8c70bd1358a7d3b --- /dev/null +++ b/images/Shaft_03259.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6696da98bf5efcc6070810e2c5143f5af9022cd3d6f5b35bc8cdc06a61f8f37d +size 102060 diff --git a/images/Shaft_03260.png b/images/Shaft_03260.png new file mode 100644 index 0000000000000000000000000000000000000000..9144664301a5f3f60492157353371f0badf94fd8 --- /dev/null +++ b/images/Shaft_03260.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f9f1ae4b6d37afc03428fb999f61475cd37facc5712041ea70e7cfb4ab146000 +size 70572 diff --git a/images/Shaft_03261.png b/images/Shaft_03261.png new file mode 100644 index 0000000000000000000000000000000000000000..13b92426f58426f934db3fd69025af828515b069 --- /dev/null +++ b/images/Shaft_03261.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:327c2eb4b53099c4bffc32f5d52e12fa2b15ce07481034f8d8e7079d0960a5e5 +size 70089 diff --git a/images/Shaft_03262.png b/images/Shaft_03262.png new file mode 100644 index 0000000000000000000000000000000000000000..91be04122bbaf9be3ef7eb2180f9230abe4ca4fb --- /dev/null +++ b/images/Shaft_03262.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0867b7a9be0d19fe2af473f5b8699277647d506c64af265251df1d483867b71 +size 71241 diff --git a/images/Shaft_03263.png b/images/Shaft_03263.png new file mode 100644 index 0000000000000000000000000000000000000000..199d80c36bdd9190e07bc914d9a8be571982b588 --- /dev/null +++ b/images/Shaft_03263.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24a5694ce989ab4bdc65b78bd7ea6fff99752df1a6022209edbe1e5be5a3e63c +size 79312 diff --git a/images/Shaft_03264.png b/images/Shaft_03264.png new file mode 100644 index 0000000000000000000000000000000000000000..443977e47f0940c397bd699d3fc47393af63706c --- /dev/null +++ b/images/Shaft_03264.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:850de9f654830ecd66983d74d96d92cdd920619074ad8c6c0d41a5010459776a +size 76292 diff --git a/images/Shaft_03265.png b/images/Shaft_03265.png new file mode 100644 index 0000000000000000000000000000000000000000..caff16d8eb66adbb297eeecfb209c3b4a33fa880 --- /dev/null +++ b/images/Shaft_03265.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:089691094815b123d820aff3b328ee77da7425f9d064a461f20e2cf924d3f047 +size 91861 diff --git a/images/Shaft_03266.png b/images/Shaft_03266.png new file mode 100644 index 0000000000000000000000000000000000000000..23dc618ef982c0f6e1470d02c3e1901b96ff9526 --- /dev/null +++ b/images/Shaft_03266.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ca9573b22764c7c3ba6cbaadae78bc772e8d893bb1dd8d5125b77163a493474 +size 93966 diff --git a/images/Shaft_03267.png b/images/Shaft_03267.png new file mode 100644 index 0000000000000000000000000000000000000000..7b292b0a5c77466ae4ba237edc6583b2332c877f --- /dev/null +++ b/images/Shaft_03267.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ef85c73a6397ae9df3da7a96ca032d4b8ea8f16cb6d0ffcf805a7a2c058d760 +size 73799 diff --git a/images/Shaft_03268.png b/images/Shaft_03268.png new file mode 100644 index 0000000000000000000000000000000000000000..6cd5a4246a891a43611a84243f798559874fef63 --- /dev/null +++ b/images/Shaft_03268.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8716f64a81aa4dd2893e4fc32af7aa2b6c1693677e2ddc554f1992cabe2f6d23 +size 85895 diff --git a/images/Shaft_03269.png b/images/Shaft_03269.png new file mode 100644 index 0000000000000000000000000000000000000000..1c8f66c8c9f4d0e25c40a864b412b69db377220c --- /dev/null +++ b/images/Shaft_03269.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4656e95284c73cd8c8b90a9d9ada6af1bed9f30db75b1bfe5f28dddb8b7b6c4f +size 120601 diff --git a/images/Shaft_03270.png b/images/Shaft_03270.png new file mode 100644 index 0000000000000000000000000000000000000000..99eb783c56d707a91a8df40050140a1aa5937a6b --- /dev/null +++ b/images/Shaft_03270.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:238a0fa9d77a0ff51458ad1731449642c6e1d4c3f39b676004cd9a49e2a9ccd1 +size 88454 diff --git a/images/Shaft_03271.png b/images/Shaft_03271.png new file mode 100644 index 0000000000000000000000000000000000000000..431a4b58a63c39203b6338187b90a7bd122ce815 --- /dev/null +++ b/images/Shaft_03271.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d37a50e5440ad47202c1648af294c1fab70d542a83f2f17b42dca303bef84efe +size 86559 diff --git a/images/Shaft_03272.png b/images/Shaft_03272.png new file mode 100644 index 0000000000000000000000000000000000000000..3ecff4c78893955e593e7a743ff43b7eb3d39c4e --- /dev/null +++ b/images/Shaft_03272.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03a011e4948e51864568d8a446fd88a0d77c85795d8ba61cc353ef3cfcb078b6 +size 83732 diff --git a/images/Shaft_03273.png b/images/Shaft_03273.png new file mode 100644 index 0000000000000000000000000000000000000000..7ef98d9f608d38fa6aed444f2e4da3f9d05eadfc --- /dev/null +++ b/images/Shaft_03273.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4bd79090ebfce077ed48bc5d377c33f46e840a912c535040cc1be6dbe48e86ff +size 76031 diff --git a/images/Shaft_03274.png b/images/Shaft_03274.png new file mode 100644 index 0000000000000000000000000000000000000000..9d653ac8e65760189decb4baea06ce51a16863b7 --- /dev/null +++ b/images/Shaft_03274.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a0cafae86e9249fa6a801e58a6a182c10a08a9fe45ea4af1c0b576e8a0c60e9 +size 99587 diff --git a/images/Shaft_03275.png b/images/Shaft_03275.png new file mode 100644 index 0000000000000000000000000000000000000000..8122ab356a9b877230642851c47659ebca70dd56 --- /dev/null +++ b/images/Shaft_03275.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:202ae36e4c2373a7eb882ce74968213c55f617771fa12aee266b46643e87440e +size 104691 diff --git a/images/Shaft_03276.png b/images/Shaft_03276.png new file mode 100644 index 0000000000000000000000000000000000000000..2c71aea315f95b44440a2b2d0fc271a7e3e2b9cb --- /dev/null +++ b/images/Shaft_03276.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb38ddd252a9b4252a842a5204a96406d042a56a544d15dff190face6cad602b +size 98835 diff --git a/images/Shaft_03277.png b/images/Shaft_03277.png new file mode 100644 index 0000000000000000000000000000000000000000..3a32d29ba62f6c9a1be29cb44a69463e3bfd6a91 --- /dev/null +++ b/images/Shaft_03277.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:390748fa8f7dbc0daf0f2ab71db5754546ad0e7bad508fb79e33ba306bb56f3e +size 91234 diff --git a/images/Shaft_03278.png b/images/Shaft_03278.png new file mode 100644 index 0000000000000000000000000000000000000000..d6876d5f344922d9d270ca219e54070fd16aa7d4 --- /dev/null +++ b/images/Shaft_03278.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93f195985d3fad7d0828876fb98c54713ddaeac7975ea7ea13ccbac4c92095e3 +size 76562 diff --git a/images/Shaft_03279.png b/images/Shaft_03279.png new file mode 100644 index 0000000000000000000000000000000000000000..60ba2dd66157347a463e884d9176f38ec7ca64d4 --- /dev/null +++ b/images/Shaft_03279.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e193c53c9bb56aa2cd9bc9c1b22b3293b5c3e67043350ef536ea21658327c618 +size 70617 diff --git a/images/Shaft_03280.png b/images/Shaft_03280.png new file mode 100644 index 0000000000000000000000000000000000000000..ada101ac52ee33aae7ec3856bf7c28cb1e99be16 --- /dev/null +++ b/images/Shaft_03280.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1d4c0a369cc242b60ae26cd6ef3be26bb7b5bbdc925801a0fedc0b050fb614b +size 69730 diff --git a/images/Shaft_03281.png b/images/Shaft_03281.png new file mode 100644 index 0000000000000000000000000000000000000000..20728fff46c723794f6ce1709d98850d452c2896 --- /dev/null +++ b/images/Shaft_03281.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:729b92391e4124bdfb145e942e07f0ae3d0591bdd0feb7cd3c47c82f805a2192 +size 83336 diff --git a/images/Shaft_03282.png b/images/Shaft_03282.png new file mode 100644 index 0000000000000000000000000000000000000000..c9006409409bcd497438288006e4c68d9ddae53c --- /dev/null +++ b/images/Shaft_03282.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a88d0f727db8dee5afe28dd42e9b316b88e01cb5e703138544d60471a0b6d72 +size 96454 diff --git a/images/Shaft_03283.png b/images/Shaft_03283.png new file mode 100644 index 0000000000000000000000000000000000000000..6da6875da519f1a2fe0c73598722150684402db4 --- /dev/null +++ b/images/Shaft_03283.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d02c1bd6a591b9d5d3a9dbef8b536f1050366b7c7d20c465f6f03b26b92ec9e4 +size 85526 diff --git a/images/Shaft_03284.png b/images/Shaft_03284.png new file mode 100644 index 0000000000000000000000000000000000000000..ecb9e87dba919f9488c6bffe29d6ac175d04d588 --- /dev/null +++ b/images/Shaft_03284.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7eff816ac9fad0d563413c44b5abcbfcb6f75840a051fcaeca3078b04b148d7e +size 92633 diff --git a/images/Shaft_03285.png b/images/Shaft_03285.png new file mode 100644 index 0000000000000000000000000000000000000000..7c0619bb4dc9eeedde7eb98c6b455c594d4ffb68 --- /dev/null +++ b/images/Shaft_03285.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71745084df3423a2320587326633ef0556cad3455e21e4b30899ceecf51bf1e7 +size 111400 diff --git a/images/Shaft_03286.png b/images/Shaft_03286.png new file mode 100644 index 0000000000000000000000000000000000000000..eb6d105f4c398fdcb3667adc89187e1e9530b2d8 --- /dev/null +++ b/images/Shaft_03286.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cb490613e88ec08a05cfd3bce106aa8af528f25950fc635ed82c20f9cd6bb6f +size 79629 diff --git a/images/Shaft_03287.png b/images/Shaft_03287.png new file mode 100644 index 0000000000000000000000000000000000000000..777b2ea06ac2f90dce7cd3b828342ebbdc9339cc --- /dev/null +++ b/images/Shaft_03287.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1d10b8301000ed4ca6f04aac63f6838897b45dab844ec747fd649ff0b611387 +size 69865 diff --git a/images/Shaft_03288.png b/images/Shaft_03288.png new file mode 100644 index 0000000000000000000000000000000000000000..b71ce3da567c784a1058d51fc397d6f1171f8c06 --- /dev/null +++ b/images/Shaft_03288.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0df8d4f55c12bc0a1df788f101879b1fd4612a3b40e1a7e591d58ea83a626fc +size 96406 diff --git a/images/Shaft_03289.png b/images/Shaft_03289.png new file mode 100644 index 0000000000000000000000000000000000000000..b417d469590510793e3edb53a2336f872361d54f --- /dev/null +++ b/images/Shaft_03289.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e2d9c05e9417a4281aafafa08562a291a2ba85cbd1b19098e57e558c117f812 +size 74633 diff --git a/images/Shaft_03290.png b/images/Shaft_03290.png new file mode 100644 index 0000000000000000000000000000000000000000..210b0ca9f5bd00c0c22b982fdeabab4fbfae9797 --- /dev/null +++ b/images/Shaft_03290.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4dd672ec087bc09f2e7eaf609ff5f1880b46039a30e46dcbac515744ece2a372 +size 72302 diff --git a/images/Shaft_03291.png b/images/Shaft_03291.png new file mode 100644 index 0000000000000000000000000000000000000000..b82410773c47dbc8ce5d577347ea342f58cf3056 --- /dev/null +++ b/images/Shaft_03291.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:494255f8da219162ac7fd1159ba78738e4f506dfddcbd0d7042b27b3b2ad1ddf +size 74604 diff --git a/images/Shaft_03292.png b/images/Shaft_03292.png new file mode 100644 index 0000000000000000000000000000000000000000..136a92c598d3c8be1712c376aeada9eee7412953 --- /dev/null +++ b/images/Shaft_03292.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b759bb40ed7a2b7a8b8c0b90a838d72e375846d218ad101fdd75059fe7c3080 +size 87550 diff --git a/images/Shaft_03293.png b/images/Shaft_03293.png new file mode 100644 index 0000000000000000000000000000000000000000..1a84f297e1b34d7e72eba8e6650b01d8447ce026 --- /dev/null +++ b/images/Shaft_03293.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32633408a60c88cb6d27517f53b4360d63f16cc24812e707fee517dc60c7e6ba +size 107851 diff --git a/images/Shaft_03294.png b/images/Shaft_03294.png new file mode 100644 index 0000000000000000000000000000000000000000..6b917f13bd54423223ade95af4bed167b9be8701 --- /dev/null +++ b/images/Shaft_03294.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ff70abda72c5983cf0819d3dff06e67c55bd87db0dde5a134dbb12a5f6eb31e +size 70899 diff --git a/images/Shaft_03295.png b/images/Shaft_03295.png new file mode 100644 index 0000000000000000000000000000000000000000..7066629de7db256a03cc39a6addfda89c1759caa --- /dev/null +++ b/images/Shaft_03295.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6c43ba0d2f1a3227f9b6f5352889c3c609c91500008d6b4a58ae11086efcfd50 +size 83636 diff --git a/images/Shaft_03296.png b/images/Shaft_03296.png new file mode 100644 index 0000000000000000000000000000000000000000..1573c8cbbfcc3f71d8b9973d502c3533b3020a80 --- /dev/null +++ b/images/Shaft_03296.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:483325ed08871a2ec61f883aefadc6020e40185e5132c3f77a5395cd95095614 +size 83399 diff --git a/images/Shaft_03297.png b/images/Shaft_03297.png new file mode 100644 index 0000000000000000000000000000000000000000..3c5b13cf9a2f4143365a8a359b8e15ef323bf527 --- /dev/null +++ b/images/Shaft_03297.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6beb17f7e80ff32da04f9f14ee643bd25baed0a0acf1a81e09ff7e564e7d3756 +size 92319 diff --git a/images/Shaft_03298.png b/images/Shaft_03298.png new file mode 100644 index 0000000000000000000000000000000000000000..59af3c290c9c600212c2db1c3ab117af5c1ba38e --- /dev/null +++ b/images/Shaft_03298.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c569eb9ed092333f10e84daeeff61a59a2cb731430c2c99ebd2d5d270983b2f +size 83797 diff --git a/images/Shaft_03299.png b/images/Shaft_03299.png new file mode 100644 index 0000000000000000000000000000000000000000..2cf3299a27e096330d19b2c108c8f1abc8c58864 --- /dev/null +++ b/images/Shaft_03299.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4dfb3b90fcdbd49ed2ee7a9f759e15f568b6c732db3ed09f98fa356ab51e853 +size 100716 diff --git a/images/Shaft_03300.png b/images/Shaft_03300.png new file mode 100644 index 0000000000000000000000000000000000000000..7cc8abfba9542005f7af3abcb964ab6eb20ed3b9 --- /dev/null +++ b/images/Shaft_03300.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a1d837c90c623dcd6e202848c2524083e3ef621b82fc24059de377165ed2e29 +size 88827 diff --git a/images/Shaft_03301.png b/images/Shaft_03301.png new file mode 100644 index 0000000000000000000000000000000000000000..2556a526db29d41676c65d861a1ed0c026b89f70 --- /dev/null +++ b/images/Shaft_03301.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04a5de802cc272a66b425cdf1a44c32c075d36eceec970b0fc33ff9005758baf +size 101246 diff --git a/images/Shaft_03302.png b/images/Shaft_03302.png new file mode 100644 index 0000000000000000000000000000000000000000..5931b9e55493c4a8c1327296d45cfddc47c58829 --- /dev/null +++ b/images/Shaft_03302.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c6e63e0bb84970b5796e4ad0f84e2632fd6d775ced6b930c5c37a8dea4b02c3 +size 82281 diff --git a/images/Shaft_03303.png b/images/Shaft_03303.png new file mode 100644 index 0000000000000000000000000000000000000000..c19b8409da4ad7687c660c56cdd5e74b3fcac864 --- /dev/null +++ b/images/Shaft_03303.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae8e19aecc83c0aa34ff848ddc7d99dc63f9bf9e277478f48b91266aa847200f +size 88734 diff --git a/images/Shaft_03304.png b/images/Shaft_03304.png new file mode 100644 index 0000000000000000000000000000000000000000..8af950e422d61a0df1e1a1557d2b6df065e682e5 --- /dev/null +++ b/images/Shaft_03304.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04d47c762bab94169915ae7dd8096ba8305d6acaf88cfd37886da8aad9e0b38c +size 84358 diff --git a/images/Shaft_03305.png b/images/Shaft_03305.png new file mode 100644 index 0000000000000000000000000000000000000000..99a90e74f64c98f85117071fbd036f4a12ece475 --- /dev/null +++ b/images/Shaft_03305.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82f72ee743a7164a08986aedd35671872511e99a04a3d44261165d7fd2a30fb6 +size 72156 diff --git a/images/Shaft_03306.png b/images/Shaft_03306.png new file mode 100644 index 0000000000000000000000000000000000000000..f0e7e364ee8147edbb5b9b3366b114968e8b8857 --- /dev/null +++ b/images/Shaft_03306.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba47b0d9dc2ee4dbaa6b21b66f369a30e66949f021510b5b9a4b090c5d912945 +size 76178 diff --git a/images/Shaft_03307.png b/images/Shaft_03307.png new file mode 100644 index 0000000000000000000000000000000000000000..289c2aa99352dabb2d33700e41556497e9e189ac --- /dev/null +++ b/images/Shaft_03307.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10a236cf9481237c5b67a553826c07926c8bd031281294338ac7ec687e5eb715 +size 74296 diff --git a/images/Shaft_03308.png b/images/Shaft_03308.png new file mode 100644 index 0000000000000000000000000000000000000000..15d84b1ad09c84f4ee69967303fbe4fba3d0c320 --- /dev/null +++ b/images/Shaft_03308.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4dc1b91eb108979064dec65a296a502734624cf94eb9aa86db4c6cdc3bfb37e +size 79808 diff --git a/images/Shaft_03309.png b/images/Shaft_03309.png new file mode 100644 index 0000000000000000000000000000000000000000..61d38d03192182a5a738e6e4d81439c40068c9dc --- /dev/null +++ b/images/Shaft_03309.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3a7c55b3cb2d7d9f1a09e77968608d2a3de5469650446fc436cf9a7c2e013fb +size 78467 diff --git a/images/Shaft_03310.png b/images/Shaft_03310.png new file mode 100644 index 0000000000000000000000000000000000000000..31de7ec7e812a71965af23b98f8f570d375ccc9a --- /dev/null +++ b/images/Shaft_03310.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:504e1f89a9104c4b8f7a95bc6080378b9f315a575483e6f622e7b28fb40b0411 +size 72740 diff --git a/images/Shaft_03311.png b/images/Shaft_03311.png new file mode 100644 index 0000000000000000000000000000000000000000..85598d8bd3173e65d0e22145dd189074755eb0aa --- /dev/null +++ b/images/Shaft_03311.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c49fa3781687e0b0fa9bedd8680aefa8203e7c64112baec82fa0e6a895cc7c37 +size 80427 diff --git a/images/Shaft_03312.png b/images/Shaft_03312.png new file mode 100644 index 0000000000000000000000000000000000000000..02c9817ff7f4846dd10ea36df4687e1e6972366f --- /dev/null +++ b/images/Shaft_03312.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6388b30967d3bbfa0ababf7d6652acee92ee8992609ab7244ba21d196bcf3855 +size 85359 diff --git a/images/Shaft_03313.png b/images/Shaft_03313.png new file mode 100644 index 0000000000000000000000000000000000000000..7697f26117f07c2427ee24ddf840d953fa626c32 --- /dev/null +++ b/images/Shaft_03313.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f51a5610795ec858f11a8b3df5d4e7c1c070023a3e2825a8e84ed07b06897cfe +size 103236 diff --git a/images/Shaft_03314.png b/images/Shaft_03314.png new file mode 100644 index 0000000000000000000000000000000000000000..7a058ccb6c8638674fe86eda0bb639794a2b6020 --- /dev/null +++ b/images/Shaft_03314.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6fdd96adaf195544b2e815df1a990edd31a38b5e141b6f669249dc4e964a1d04 +size 92939 diff --git a/images/Shaft_03315.png b/images/Shaft_03315.png new file mode 100644 index 0000000000000000000000000000000000000000..319a86e7104eade4f1c1b27085e1ee456f90b3a5 --- /dev/null +++ b/images/Shaft_03315.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a733129d62b908b795e397e6f74fc57e43890096beffff4e252a9c64ae1f2d2c +size 101786 diff --git a/images/Shaft_03316.png b/images/Shaft_03316.png new file mode 100644 index 0000000000000000000000000000000000000000..b61a2eec18c9219e9efbf382b4578b594f5d8f31 --- /dev/null +++ b/images/Shaft_03316.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9154e46875dd3135e95f6b9c844069be702451dc8fd6c3424ef65b815cc4d51 +size 105029 diff --git a/images/Shaft_03317.png b/images/Shaft_03317.png new file mode 100644 index 0000000000000000000000000000000000000000..6bb90b53d3689a48a8c286334772d75b0b149af0 --- /dev/null +++ b/images/Shaft_03317.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0e39e169470addc92ecbfbe89d7aec267d53d4e11b507e189a83a6a87a5f7d8 +size 90014 diff --git a/images/Shaft_03318.png b/images/Shaft_03318.png new file mode 100644 index 0000000000000000000000000000000000000000..fc43c52621050b0dcc5e083e10adef1f438e35b5 --- /dev/null +++ b/images/Shaft_03318.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0896cf21eba64dbf45adb59890e5e4c980ea5d518c0e2d9b4b1b8f671c57f62b +size 85578 diff --git a/images/Shaft_03319.png b/images/Shaft_03319.png new file mode 100644 index 0000000000000000000000000000000000000000..b2064404616ef0964f87919809f1e3dd0b6300ee --- /dev/null +++ b/images/Shaft_03319.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09177cc7208c1327b32ca637e8aa6cebc4785300aa4c144aaeb404c066987b4c +size 85140 diff --git a/images/Shaft_03320.png b/images/Shaft_03320.png new file mode 100644 index 0000000000000000000000000000000000000000..042a7cabe902e0f261174682b0896bbd229e2b71 --- /dev/null +++ b/images/Shaft_03320.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:559691630e8084600e1345adf746ff8d2d532691ca69111830046673365f19c9 +size 92368 diff --git a/images/Shaft_03321.png b/images/Shaft_03321.png new file mode 100644 index 0000000000000000000000000000000000000000..c78c6b8c7130af116f3700731dfceaba9ef761fb --- /dev/null +++ b/images/Shaft_03321.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcd62a6406a168c35dfbda20f49b752c758c2d85f5fbb93c2808eacaa0429fe6 +size 75181 diff --git a/images/Shaft_03322.png b/images/Shaft_03322.png new file mode 100644 index 0000000000000000000000000000000000000000..f56688f1cc20e5a88ec895eee29c46d8b5f0175c --- /dev/null +++ b/images/Shaft_03322.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b581fe5f85c5e042075129219c380ef2e71b9224e0370add9cb379510eb71790 +size 91475 diff --git a/images/Shaft_03323.png b/images/Shaft_03323.png new file mode 100644 index 0000000000000000000000000000000000000000..e87abfb496c42d661b63601c64c6ebd1513b5b39 --- /dev/null +++ b/images/Shaft_03323.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1731549a41f1a5f1607b36fc3747991032cfa35fbe6ad6482213235767101fce +size 95794 diff --git a/images/Shaft_03324.png b/images/Shaft_03324.png new file mode 100644 index 0000000000000000000000000000000000000000..149c7621ff2152de54efdf97d96e445c0e869305 --- /dev/null +++ b/images/Shaft_03324.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4106add33e2c6e0188218d77a2252f6ef605db416e19c9add183e2229afa9fa +size 92090 diff --git a/images/Shaft_03325.png b/images/Shaft_03325.png new file mode 100644 index 0000000000000000000000000000000000000000..3ef7d2f0ab1b6b7daea3bc30db9d648d8c9556e4 --- /dev/null +++ b/images/Shaft_03325.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0eff593244555ff622d10790ddb8b9d43d344c2b290fa87836d430d13d905654 +size 107980 diff --git a/images/Shaft_03326.png b/images/Shaft_03326.png new file mode 100644 index 0000000000000000000000000000000000000000..1d94db6811a955862c1bff3afbe51ab4ec53ca16 --- /dev/null +++ b/images/Shaft_03326.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c507c35fc618e13129bf19e36a44f2b934451e42276a39e61153f28f7f29034 +size 102976 diff --git a/images/Shaft_03327.png b/images/Shaft_03327.png new file mode 100644 index 0000000000000000000000000000000000000000..531588cc189e38aa1919ea486f690575d832edaf --- /dev/null +++ b/images/Shaft_03327.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9dc334e7bab6258219fe5b38a02e910054601239efec0e761568dff841f3a960 +size 99483 diff --git a/images/Shaft_03328.png b/images/Shaft_03328.png new file mode 100644 index 0000000000000000000000000000000000000000..402c4b3b67fb4ecf26565ac09ab6d046bcb89d18 --- /dev/null +++ b/images/Shaft_03328.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20cf07d17ed736b51f3e08c36bc70bbd15c18a7974f151a6efb3cdabeb161116 +size 85061 diff --git a/images/Shaft_03329.png b/images/Shaft_03329.png new file mode 100644 index 0000000000000000000000000000000000000000..3740921dde2a4169ca2ae9dd713215bbd6f5e095 --- /dev/null +++ b/images/Shaft_03329.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:828ef475f4259addadb6166ec93cfe8f03af85f2ae58594f5d3ca98e6b4f4dc0 +size 80352 diff --git a/images/Shaft_03330.png b/images/Shaft_03330.png new file mode 100644 index 0000000000000000000000000000000000000000..b8dd028d47b1e9c39f2ff4c38eaf8a4d131034ce --- /dev/null +++ b/images/Shaft_03330.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ff18da610889e07e334627c156df9bb4f263d641f99d53e020ee8ad4ba3e7a3 +size 73505 diff --git a/images/Shaft_03331.png b/images/Shaft_03331.png new file mode 100644 index 0000000000000000000000000000000000000000..a6ecb8f9a05b2df028271f1aea959c9f139d894e --- /dev/null +++ b/images/Shaft_03331.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f8603a72bdbdf438425cb6d77ff531e4c45dae3418da3f1a45e6dbf5b9314cf +size 70048 diff --git a/images/Shaft_03332.png b/images/Shaft_03332.png new file mode 100644 index 0000000000000000000000000000000000000000..cb7fb922a1ad81e87012062abb452c1844330b36 --- /dev/null +++ b/images/Shaft_03332.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecaad0599959ab150aaca5e22d9ec62b13ddaaa9b2c022e1c95a9b244cff9913 +size 75116 diff --git a/images/Shaft_03333.png b/images/Shaft_03333.png new file mode 100644 index 0000000000000000000000000000000000000000..6a5282f48797da9fea01fd612a14a120bb8e379a --- /dev/null +++ b/images/Shaft_03333.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:699a21b50421d8f0447d6f9d8acd1d16bce602f73fa522fce027a963e8708af6 +size 95288 diff --git a/images/Shaft_03334.png b/images/Shaft_03334.png new file mode 100644 index 0000000000000000000000000000000000000000..3591bd2c110ec388304925e086ad1db6557c8702 --- /dev/null +++ b/images/Shaft_03334.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d51f8bfb49e9f832a43deed7e5d88815cebb0171330672366d3ae4c148a5f2e5 +size 109859 diff --git a/images/Shaft_03335.png b/images/Shaft_03335.png new file mode 100644 index 0000000000000000000000000000000000000000..21ddb579782069fdda7b1057cd402428e7c1a69f --- /dev/null +++ b/images/Shaft_03335.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6503d65c83a69027041e2a9a57c9e8193914ba37e64e6d828da49022bf5666a +size 71792 diff --git a/images/Shaft_03336.png b/images/Shaft_03336.png new file mode 100644 index 0000000000000000000000000000000000000000..2146005bcbb2abcf266c5700751f39291742b968 --- /dev/null +++ b/images/Shaft_03336.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcc7d559a94e3a41103600c8590b86345706619dd7e819e83641c31d7c8c2c5f +size 73518 diff --git a/images/Shaft_03337.png b/images/Shaft_03337.png new file mode 100644 index 0000000000000000000000000000000000000000..b012260a82cbc38a344ebeff8b6005c26ef92377 --- /dev/null +++ b/images/Shaft_03337.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28a0dc89ffedb867577a1d6330af9ff602d52787a461f94ccf523e4ba47ab0d7 +size 98597 diff --git a/images/Shaft_03338.png b/images/Shaft_03338.png new file mode 100644 index 0000000000000000000000000000000000000000..b97308a79f04cd71748d54f19a7b21256e8658a5 --- /dev/null +++ b/images/Shaft_03338.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e8b22f40e8d97ba5d28973da1fc159c937e04b80e9d2ea00ed03574d2777048 +size 83543 diff --git a/images/Shaft_03339.png b/images/Shaft_03339.png new file mode 100644 index 0000000000000000000000000000000000000000..86ac5cd4a2f0197f29bbad38fda82a1bf34921ae --- /dev/null +++ b/images/Shaft_03339.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e867c14c71b76a9a07a06eac25a039fd54715960af2b60a626e7e2c3564f2602 +size 97721 diff --git a/images/Shaft_03340.png b/images/Shaft_03340.png new file mode 100644 index 0000000000000000000000000000000000000000..fcdbd2df32c9e780a5749be8641d00202a0e8c2f --- /dev/null +++ b/images/Shaft_03340.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2f3f98aaefc03320fe65e8e92472b2961af0afbbf9fed11a47f1f8e8c41f627 +size 102718 diff --git a/images/Shaft_03341.png b/images/Shaft_03341.png new file mode 100644 index 0000000000000000000000000000000000000000..797d9bd0c40f683e83a3a0bf84272dd7a55e86b7 --- /dev/null +++ b/images/Shaft_03341.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e13de4e1f3ed410b0da7633595053a516be91e4ab0afc778f42caeee9a4b71ff +size 85103 diff --git a/images/Shaft_03342.png b/images/Shaft_03342.png new file mode 100644 index 0000000000000000000000000000000000000000..3fb3291433e541cbf8849b5a733641e460976fdd --- /dev/null +++ b/images/Shaft_03342.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75f7222acd6f3f075068cc0e8d512a2c2eee7f193659925ae80697a2138ccf0e +size 101990 diff --git a/images/Shaft_03343.png b/images/Shaft_03343.png new file mode 100644 index 0000000000000000000000000000000000000000..b86e195dbe02cf4a48171ea95e8917515071f831 --- /dev/null +++ b/images/Shaft_03343.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b7efc7b35b35e1cc7c8737081598a494b401643908424f6b98ce3d3a518580d2 +size 117515 diff --git a/images/Shaft_03344.png b/images/Shaft_03344.png new file mode 100644 index 0000000000000000000000000000000000000000..251632d3ab4378f950f300fb3c79dca224a64e1d --- /dev/null +++ b/images/Shaft_03344.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f1ae4bc6e2b05aa11f3b9db204a825078c38abe0d2cf08425b313dd55592549 +size 80592 diff --git a/images/Shaft_03345.png b/images/Shaft_03345.png new file mode 100644 index 0000000000000000000000000000000000000000..764b63644a6e3c22a1863be1ba3d6e150de273ef --- /dev/null +++ b/images/Shaft_03345.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0e42ba65f3717ad5b5de3759f72f3c341b4e4847cdc6bb41a0513a828e17ec6 +size 102635 diff --git a/images/Shaft_03346.png b/images/Shaft_03346.png new file mode 100644 index 0000000000000000000000000000000000000000..aef643f359eeb852330cc8ba7b030290f73aec87 --- /dev/null +++ b/images/Shaft_03346.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e911e8bfd75520b920016dcac61a59d89f9863c34d416d027f3cb8a75065f7bc +size 106494 diff --git a/images/Shaft_03347.png b/images/Shaft_03347.png new file mode 100644 index 0000000000000000000000000000000000000000..8be8ffb8425a880a475415f996416dc00e381acf --- /dev/null +++ b/images/Shaft_03347.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d020f070f8fd4537817ed7df1c402fae1a7e6e781511f9c60e03f80e03306325 +size 111970 diff --git a/images/Shaft_03348.png b/images/Shaft_03348.png new file mode 100644 index 0000000000000000000000000000000000000000..9563eda6367698afa5cb01628b8a3687c3a28da7 --- /dev/null +++ b/images/Shaft_03348.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd4ef2b7ec607accde799fcf74984f54a78640453620387976eb2a7509a53250 +size 108530 diff --git a/images/Shaft_03349.png b/images/Shaft_03349.png new file mode 100644 index 0000000000000000000000000000000000000000..e7036e3c3c1188afee33533326f5e0975afd28e7 --- /dev/null +++ b/images/Shaft_03349.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2253ac046a2fbc727b9c74b69d1399650a83903d53a972dc2eb7a6c0d204a5a0 +size 79793 diff --git a/images/Shaft_03350.png b/images/Shaft_03350.png new file mode 100644 index 0000000000000000000000000000000000000000..41c35d77b2f07700373f7e07cb29f3fba010238e --- /dev/null +++ b/images/Shaft_03350.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ca67282c59bd07ef9caa9e3d6791178d2f6eeb5bbc1a3d1aed7bea6087ff854 +size 84755 diff --git a/images/Shaft_03351.png b/images/Shaft_03351.png new file mode 100644 index 0000000000000000000000000000000000000000..15a4371bf428ddd22a07e883facc1e98caa65a50 --- /dev/null +++ b/images/Shaft_03351.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a4cd41d4700c02d32bfad08bfb26db09b127998acfc0f038ba2240c6ec45824 +size 73357 diff --git a/images/Shaft_03352.png b/images/Shaft_03352.png new file mode 100644 index 0000000000000000000000000000000000000000..e25237adb18db4a319a3086184b14cfa2f8cd0e3 --- /dev/null +++ b/images/Shaft_03352.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8113bdbcaf0813e149f2b843121d76e4f27a06ae69ee13be8f2ae621ef9764c6 +size 93134 diff --git a/images/Shaft_03353.png b/images/Shaft_03353.png new file mode 100644 index 0000000000000000000000000000000000000000..b7c691e91b170f1872062e6403efa74e2a4aa4bc --- /dev/null +++ b/images/Shaft_03353.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3114339446e6df88d949be13e170e4b653cf9ee367dd7d53acd377edf5e23194 +size 70402 diff --git a/images/Shaft_03354.png b/images/Shaft_03354.png new file mode 100644 index 0000000000000000000000000000000000000000..eba45a195e901c17043841f2807d4b52fbc3632c --- /dev/null +++ b/images/Shaft_03354.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42d4fa786bca9bcec7cdec748dfe9ddf2a70282fe83477223905c617f0d334d1 +size 80870 diff --git a/images/Shaft_03355.png b/images/Shaft_03355.png new file mode 100644 index 0000000000000000000000000000000000000000..5841b7fce59e9d73df6cd448f7a25a2b2736c65f --- /dev/null +++ b/images/Shaft_03355.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00c309b5bd9cd694c08cfb848a035840dc534b485851fd454a70d4bbf2567d64 +size 79607 diff --git a/images/Shaft_03356.png b/images/Shaft_03356.png new file mode 100644 index 0000000000000000000000000000000000000000..111261a2a6b087770a4ab80027c7302053238d5e --- /dev/null +++ b/images/Shaft_03356.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f234a5fdc83244a76ba84f99cd19d378faf2357248a82674ce864c8ce6ec64e +size 71231 diff --git a/images/Shaft_03357.png b/images/Shaft_03357.png new file mode 100644 index 0000000000000000000000000000000000000000..f09a136c0cb58fa01095bf0be9d3ab3b0f0a23b0 --- /dev/null +++ b/images/Shaft_03357.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08cb69fc3cf98f831a2f99fa3a600f321d37a3c6e9dc2a8c4138187c98e43638 +size 106578 diff --git a/images/Shaft_03358.png b/images/Shaft_03358.png new file mode 100644 index 0000000000000000000000000000000000000000..ef72dc4c262ba83a5840967042a6ff30cf8efc12 --- /dev/null +++ b/images/Shaft_03358.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd4bfcd21e3e63ddf1ed97e9a4935d3eb70e1260fd76510169059dbdec377068 +size 79151 diff --git a/images/Shaft_03359.png b/images/Shaft_03359.png new file mode 100644 index 0000000000000000000000000000000000000000..6d581909e4d8fe9eab6273a776f8081fd2c24f74 --- /dev/null +++ b/images/Shaft_03359.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07f810dde5366bcdb4c82bd2a1e00d0471119ae4de173879f266257061222900 +size 83145 diff --git a/images/Shaft_03360.png b/images/Shaft_03360.png new file mode 100644 index 0000000000000000000000000000000000000000..24823b29b7d7bdabccc52fc6789a6ce679cd7387 --- /dev/null +++ b/images/Shaft_03360.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2439aeb70684f1806ec0fa6c00fad0471f3cf7c44cd0077c860a39bd5f44da52 +size 76920 diff --git a/images/Shaft_03361.png b/images/Shaft_03361.png new file mode 100644 index 0000000000000000000000000000000000000000..6f0449962d5abcd6520ab26e4ffb21f79dc44920 --- /dev/null +++ b/images/Shaft_03361.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98ee147cbaa4063ff3b3ecec854f36a7b8905484d7f3c48ebd62574a96f73f6d +size 99238 diff --git a/images/Shaft_03362.png b/images/Shaft_03362.png new file mode 100644 index 0000000000000000000000000000000000000000..d48e7f3cb4c0e430a9bead85a8cc262ce6b0de58 --- /dev/null +++ b/images/Shaft_03362.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:faf4a17eccc7499e618365ff75642490f1f5aa7e0e24e7b24807d4bee80152d2 +size 83350 diff --git a/images/Shaft_03363.png b/images/Shaft_03363.png new file mode 100644 index 0000000000000000000000000000000000000000..e14a02811cf54fd331e05130a158a234bfb9886a --- /dev/null +++ b/images/Shaft_03363.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12110bded1fa93755be10f742bcfe091855e3fab03ee670fb2dd4b2277526f72 +size 107150 diff --git a/images/Shaft_03364.png b/images/Shaft_03364.png new file mode 100644 index 0000000000000000000000000000000000000000..9b86c6ee46e54592dffc0836cb74262a9bc30ccf --- /dev/null +++ b/images/Shaft_03364.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db2fd44ab1f0f11d0f288895ab307593c712f0ba3a006b8c7fb7a9a58ad6b4f0 +size 108105 diff --git a/images/Shaft_03365.png b/images/Shaft_03365.png new file mode 100644 index 0000000000000000000000000000000000000000..d1ac6b1f3a16b9555885666d9d1233f634a8696c --- /dev/null +++ b/images/Shaft_03365.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:492b005d0e45c707bd66e271913d4968966309d0dc555cafcd1f656c6e04b8a1 +size 77686 diff --git a/images/Shaft_03366.png b/images/Shaft_03366.png new file mode 100644 index 0000000000000000000000000000000000000000..6334e927c708ac9d39882086f488409b15bbfffd --- /dev/null +++ b/images/Shaft_03366.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67f1d1ab5bf685092f0ada824ed29ae426f682c67bd6dca1e43bf2aa014b748b +size 80561 diff --git a/images/Shaft_03367.png b/images/Shaft_03367.png new file mode 100644 index 0000000000000000000000000000000000000000..1d1c64b57d68305dd9f1ba45fcabba84e203a835 --- /dev/null +++ b/images/Shaft_03367.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c600e8e3547890d230cc07faec947abf25139462ea7cff967d4435544548b3f +size 83425 diff --git a/images/Shaft_03368.png b/images/Shaft_03368.png new file mode 100644 index 0000000000000000000000000000000000000000..9f440206603beddebf1b81d7941910a1153a77b2 --- /dev/null +++ b/images/Shaft_03368.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02f8ceef5c9dfa158dc5db043d8a495e8f0f703cb8a637b8da29da576484fb30 +size 92168 diff --git a/images/Shaft_03369.png b/images/Shaft_03369.png new file mode 100644 index 0000000000000000000000000000000000000000..ac01e54ef2e86711dc33244e5b349351977bee73 --- /dev/null +++ b/images/Shaft_03369.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de4ac38e0b6003e14562d5d37f2374b22ec7cce943e7807db3c7bb93b080515e +size 89053 diff --git a/images/Shaft_03370.png b/images/Shaft_03370.png new file mode 100644 index 0000000000000000000000000000000000000000..998950c64f94b57fa3ed7014be7bf24e3d84aa59 --- /dev/null +++ b/images/Shaft_03370.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7033c685bdbbce0e080388e1d18da6197611088bd5b479a440a57769f022d890 +size 79859 diff --git a/images/Shaft_03371.png b/images/Shaft_03371.png new file mode 100644 index 0000000000000000000000000000000000000000..b6f5a0ecc152ed33303e97c71817b3b9c9eaf18e --- /dev/null +++ b/images/Shaft_03371.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c27e77c3c1608fbccaa417e721f0e5b22175e8090fa61b0116a44382315be704 +size 74815 diff --git a/images/Shaft_03372.png b/images/Shaft_03372.png new file mode 100644 index 0000000000000000000000000000000000000000..c4c96cc84e8f1ffdddbf02bdb376e22836d397ba --- /dev/null +++ b/images/Shaft_03372.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc68d3913f2b1c40a1bd8cf83e50157046bc472ad11aa6cefe692abf053d23a6 +size 71036 diff --git a/images/Shaft_03373.png b/images/Shaft_03373.png new file mode 100644 index 0000000000000000000000000000000000000000..fc04d05d64d7dec5f88d9d7188e34f08681e3fb6 --- /dev/null +++ b/images/Shaft_03373.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48e62a43875f9c1d193efa6c81b82ae2d574d4f6a1fe5e3dd5fc2a5c5b318e36 +size 86418 diff --git a/images/Shaft_03374.png b/images/Shaft_03374.png new file mode 100644 index 0000000000000000000000000000000000000000..6934188f9fcf0760e15a02c363f31410b4124546 --- /dev/null +++ b/images/Shaft_03374.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1964dbc0c63c3c2616d3142a358315b2cc2f507a1fb076626679265e5e4e5215 +size 91667 diff --git a/images/Shaft_03375.png b/images/Shaft_03375.png new file mode 100644 index 0000000000000000000000000000000000000000..f6ca1fe6bb4162c2ab8ca683230169a648f4ed06 --- /dev/null +++ b/images/Shaft_03375.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b44b9fb3b8781826177f38a70e6836ecb53cca42c907c0e17e5d8a6fb709a30 +size 74560 diff --git a/images/Shaft_03376.png b/images/Shaft_03376.png new file mode 100644 index 0000000000000000000000000000000000000000..aeb5247b4c8e38e8b8664c33d785e35ad435d835 --- /dev/null +++ b/images/Shaft_03376.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de68f10f3866753c4e535c5253175898c87378a4ca27d9987b3ad337a838ebaa +size 80127 diff --git a/images/Shaft_03377.png b/images/Shaft_03377.png new file mode 100644 index 0000000000000000000000000000000000000000..39ba8f6001d1ba18f3e904850e48d1474020b539 --- /dev/null +++ b/images/Shaft_03377.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5e43671bf85eb7baa5237b6b8ccddf6b1124450c2588464c964404263299abf +size 104347 diff --git a/images/Shaft_03378.png b/images/Shaft_03378.png new file mode 100644 index 0000000000000000000000000000000000000000..fb3bf3997234207e9e199a61eefd44cb361ad691 --- /dev/null +++ b/images/Shaft_03378.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a68bf01bf17f3a15c44386be0e419eeaf6bc0228edcd814eddc0967f871faa5 +size 83225 diff --git a/images/Shaft_03379.png b/images/Shaft_03379.png new file mode 100644 index 0000000000000000000000000000000000000000..ba8e66e346441b6e9bf8e01a4deaef0dc4011420 --- /dev/null +++ b/images/Shaft_03379.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d775a28dfffbd789d0b1594665651737388303c5a4514ee2db6db9986a9e29fd +size 89438 diff --git a/images/Shaft_03380.png b/images/Shaft_03380.png new file mode 100644 index 0000000000000000000000000000000000000000..2b9ab6896a5013da20c605583b176d0cfe0edc8e --- /dev/null +++ b/images/Shaft_03380.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84bff7b461caddec3ac5890ac1e4a052266d56ac9fa2e884680ea64aee7dcd13 +size 71617 diff --git a/images/Shaft_03381.png b/images/Shaft_03381.png new file mode 100644 index 0000000000000000000000000000000000000000..46a19e344d67202f9981eb64889fb3b3b6b4c5b6 --- /dev/null +++ b/images/Shaft_03381.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e820a32be62447aa45ac9225274ffb300806aaecc352f0c2f3726dd9f1a6f973 +size 95091 diff --git a/images/Shaft_03382.png b/images/Shaft_03382.png new file mode 100644 index 0000000000000000000000000000000000000000..1083c505ef6e2ed396b006fb3e77f59d55d2e722 --- /dev/null +++ b/images/Shaft_03382.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:204ef675968ea5060be57220a829cba846aefff9ab67f60c6a2a86a181702f58 +size 71884 diff --git a/images/Shaft_03383.png b/images/Shaft_03383.png new file mode 100644 index 0000000000000000000000000000000000000000..f7d97c57d5cc24bd579a10769464930f001adcfb --- /dev/null +++ b/images/Shaft_03383.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2b27121102d50a693a2aaf3a2816d55ab0c9aa9985dc4eaa4c426f9b6ef66d7 +size 94435 diff --git a/images/Shaft_03384.png b/images/Shaft_03384.png new file mode 100644 index 0000000000000000000000000000000000000000..486ad693adb1b417baa4748aebd2962c8d0e229b --- /dev/null +++ b/images/Shaft_03384.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f93bc87b0122108148daa77d2b6e9d8a6308ca5b0d47777d7bb86b89d71b68f6 +size 112905 diff --git a/images/Shaft_03385.png b/images/Shaft_03385.png new file mode 100644 index 0000000000000000000000000000000000000000..c293c793d8bbf1a4e5245c2c99f4cc301df9a11b --- /dev/null +++ b/images/Shaft_03385.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63c10fddcf09501ce51daad12407d098e90a86ce786dbde1ef0404108a8b29e5 +size 94769 diff --git a/images/Shaft_03386.png b/images/Shaft_03386.png new file mode 100644 index 0000000000000000000000000000000000000000..45f6f04fc70af6722b29cad7f364a9f38b6e2ff8 --- /dev/null +++ b/images/Shaft_03386.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20b9edd14ea4b290abdea36038b44bd316441b1fc02f10d8c0a531ee2a23f1a2 +size 70263 diff --git a/images/Shaft_03387.png b/images/Shaft_03387.png new file mode 100644 index 0000000000000000000000000000000000000000..184337a013bc97d9e4f6bea6db7fc17c0c0355df --- /dev/null +++ b/images/Shaft_03387.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b446c8dd030a6cb5f50d05155bd38f5266589416ccc032fcb09de0225a08208f +size 95488 diff --git a/images/Shaft_03388.png b/images/Shaft_03388.png new file mode 100644 index 0000000000000000000000000000000000000000..d3ed1f71733ae34c84cdcdbff44ab3409da2bdd7 --- /dev/null +++ b/images/Shaft_03388.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:619f9fac91711c84a31b73d4efb6e731828a83c13b5666cd8c3aa74aebdeb8ce +size 94871 diff --git a/images/Shaft_03389.png b/images/Shaft_03389.png new file mode 100644 index 0000000000000000000000000000000000000000..1ed5715178062ba630f69812ffe4df47cad75ab5 --- /dev/null +++ b/images/Shaft_03389.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37154e72dbe2204b96498e465f0624adcf2c432f92c69fd928bb58b3b1a4194a +size 74644 diff --git a/images/Shaft_03390.png b/images/Shaft_03390.png new file mode 100644 index 0000000000000000000000000000000000000000..1f28a9c2b4601968a8a2a1ba44c9a9ebaf37b23c --- /dev/null +++ b/images/Shaft_03390.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e48efa8594f7d2ec57d53d49eb3a01b8f501e361983793ff9a062db97870489 +size 71326 diff --git a/images/Shaft_03391.png b/images/Shaft_03391.png new file mode 100644 index 0000000000000000000000000000000000000000..e045fbfaa6fb7e3bd932b8756ad848d96f2a77f9 --- /dev/null +++ b/images/Shaft_03391.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89285eec332115113bf70edeb5150f220895cc660547ac51f7b1f4a050bafe1e +size 91079 diff --git a/images/Shaft_03392.png b/images/Shaft_03392.png new file mode 100644 index 0000000000000000000000000000000000000000..a96baef4f1c18965f7281d0833a260c8a2012241 --- /dev/null +++ b/images/Shaft_03392.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f5bc9c282d604876de08ed51d82492a5ae2db72718d1b997da93063e1a63b32 +size 74853 diff --git a/images/Shaft_03393.png b/images/Shaft_03393.png new file mode 100644 index 0000000000000000000000000000000000000000..bc0ce0343eee5da65b9bbd7d4939fe96c9883526 --- /dev/null +++ b/images/Shaft_03393.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1424331bdd6acbd28f821381ca952c62ecd8aeaf45d610df583bfc6565bb2c70 +size 87336 diff --git a/images/Shaft_03394.png b/images/Shaft_03394.png new file mode 100644 index 0000000000000000000000000000000000000000..9441d6f36f5b7bd18009faaa519bab4d7d6effb1 --- /dev/null +++ b/images/Shaft_03394.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fc71a0324207ddb47b23ee404ce66b0f1ac9c11cce2cec8efe1c49c10249433 +size 89957 diff --git a/images/Shaft_03395.png b/images/Shaft_03395.png new file mode 100644 index 0000000000000000000000000000000000000000..c02870706c58f758f567f1ac9e7a1702cc888da0 --- /dev/null +++ b/images/Shaft_03395.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebce45043813695183e3755c402cfd6362eed46f7b3e3542f23f7284bad1dc5d +size 94268 diff --git a/images/Shaft_03396.png b/images/Shaft_03396.png new file mode 100644 index 0000000000000000000000000000000000000000..6b484f30e7cbccf068c059dadf3db238e7f79309 --- /dev/null +++ b/images/Shaft_03396.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8adfe0af619c1580e4d358b5a03b59d22aeaa2d999202538eaca34f212ed4436 +size 89724 diff --git a/images/Shaft_03397.png b/images/Shaft_03397.png new file mode 100644 index 0000000000000000000000000000000000000000..2fe623eddd8e55cc915ac09d66b8f91251806581 --- /dev/null +++ b/images/Shaft_03397.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65dac0191133fa68b57f732f74dac3c3c137613b86fde731915d4a0f7a8dadde +size 81013 diff --git a/images/Shaft_03398.png b/images/Shaft_03398.png new file mode 100644 index 0000000000000000000000000000000000000000..52d80a730fe27e9d56d6cd9386861fa450382760 --- /dev/null +++ b/images/Shaft_03398.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a2e0e1ff5377bb7df1b76bf7108de840fce5d2fa8be0f776c668dbe5d194e67 +size 86743 diff --git a/images/Shaft_03399.png b/images/Shaft_03399.png new file mode 100644 index 0000000000000000000000000000000000000000..02531532e2d72b62210073262fad106c3995fbf0 --- /dev/null +++ b/images/Shaft_03399.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:006cb176ec1532fc22306583ea037018e81940940eaddef81f714076c70c325e +size 71929 diff --git a/images/Shaft_03400.png b/images/Shaft_03400.png new file mode 100644 index 0000000000000000000000000000000000000000..7a71099e20ec31d4694d87276c01905d3489198d --- /dev/null +++ b/images/Shaft_03400.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2154b2ac09365dde46733d1ed952cda31be211326bc5584b6d43d3d2507af057 +size 109608 diff --git a/images/Shaft_03401.png b/images/Shaft_03401.png new file mode 100644 index 0000000000000000000000000000000000000000..4f37da6ed2c546256fae417bf150e0c8331c856e --- /dev/null +++ b/images/Shaft_03401.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:124e5470ee9291898b4921bce7fe9c5b53e3888cd325ddcf0be7652396531ae9 +size 76602 diff --git a/images/Shaft_03402.png b/images/Shaft_03402.png new file mode 100644 index 0000000000000000000000000000000000000000..891f27d9cff01a2ff093e1755678de5e8f7f9ed5 --- /dev/null +++ b/images/Shaft_03402.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c927907ab289b7944093e0eaf7d438246e8a4412b10b51f9b2af25c9ed84ced9 +size 92215 diff --git a/images/Shaft_03403.png b/images/Shaft_03403.png new file mode 100644 index 0000000000000000000000000000000000000000..fb7a4f0d65804645243dbaed96c5bf851b7ab09e --- /dev/null +++ b/images/Shaft_03403.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:340b035804b7feb4155bff2c5bfebfec55b3e04b4b6b23c7a149e5cee210a595 +size 85252 diff --git a/images/Shaft_03404.png b/images/Shaft_03404.png new file mode 100644 index 0000000000000000000000000000000000000000..3a9824747f2c2f47da3407aa6c018c7f2fdd0e62 --- /dev/null +++ b/images/Shaft_03404.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48d59005d6015d3e66507f893d6868be576aca7dc12277eacd2c541ebc301834 +size 98802 diff --git a/images/Shaft_03405.png b/images/Shaft_03405.png new file mode 100644 index 0000000000000000000000000000000000000000..8ea3f09ec9dac2ec01eaafc7d27824a131108b6c --- /dev/null +++ b/images/Shaft_03405.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a4477ce5638d9c56de95749ecf5013a1936211ebccbb6cb78c0ced85cd24ece +size 73929 diff --git a/images/Shaft_03406.png b/images/Shaft_03406.png new file mode 100644 index 0000000000000000000000000000000000000000..2a410fc795278dd654a0f93a3d756cdebcbebbc6 --- /dev/null +++ b/images/Shaft_03406.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff7dcf68d7db3b69a384fd6de74f4978b8efa27892128689287e119f56d9dc18 +size 99575 diff --git a/images/Shaft_03407.png b/images/Shaft_03407.png new file mode 100644 index 0000000000000000000000000000000000000000..134686aac18578b0cdb18af5843a0f2cf47c8d0f --- /dev/null +++ b/images/Shaft_03407.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7d6deb0627b6261df82e778dc2a27fc270de50bbc9ea576b72d83194ac73ad8 +size 74222 diff --git a/images/Shaft_03408.png b/images/Shaft_03408.png new file mode 100644 index 0000000000000000000000000000000000000000..fa786b184641ca16ba24ec9ed4e5c176c559ddd8 --- /dev/null +++ b/images/Shaft_03408.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:083a24952afdb66f76c8d7c8e1a98cc6d06eae9972bd18f16710f49117faec33 +size 105359 diff --git a/images/Shaft_03409.png b/images/Shaft_03409.png new file mode 100644 index 0000000000000000000000000000000000000000..b97f511b319e414131cedf80a30284ecddca7a14 --- /dev/null +++ b/images/Shaft_03409.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:900a4e9c42a2915754d658f45cd6ece44ac166194ffb0bbc8087cf6efde4ddfa +size 85549 diff --git a/images/Shaft_03410.png b/images/Shaft_03410.png new file mode 100644 index 0000000000000000000000000000000000000000..83047ff6a3b537c2d236b97a10a06eee307e3db6 --- /dev/null +++ b/images/Shaft_03410.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:335219c7bfec7ceef72885d55cff65dab86634b38240a52aad68d459a5aab9ad +size 100228 diff --git a/images/Shaft_03411.png b/images/Shaft_03411.png new file mode 100644 index 0000000000000000000000000000000000000000..ac834cfac8c423df1459bdb4eb67b68ff31ce406 --- /dev/null +++ b/images/Shaft_03411.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3fe1cb09364ea586a6b641c8ee825541dc608a30d9720fbb8fbe76be6a82528 +size 68566 diff --git a/images/Shaft_03412.png b/images/Shaft_03412.png new file mode 100644 index 0000000000000000000000000000000000000000..0294978ca66547a94c2bc3468c7be50be7f5147e --- /dev/null +++ b/images/Shaft_03412.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41d2ec18123df7deba105f8b2b3c817a6ac2b227a6e42ff00b23bbe7080964d2 +size 73450 diff --git a/images/Shaft_03413.png b/images/Shaft_03413.png new file mode 100644 index 0000000000000000000000000000000000000000..86c74429d13e60f16494060883c2d9fa53a8bdb7 --- /dev/null +++ b/images/Shaft_03413.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9386ee9e078f5e712f7f3703c4fcb2188f3c7995ed57f21db7464dfb35355c2d +size 71596 diff --git a/images/Shaft_03414.png b/images/Shaft_03414.png new file mode 100644 index 0000000000000000000000000000000000000000..d399fa1021bb1e9bb155081b93fe5d60ce9e6e2d --- /dev/null +++ b/images/Shaft_03414.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8171a2928d376ae6f9b4a4bd364d07b9551351f0767cebc2651116620c49a8a8 +size 96115 diff --git a/images/Shaft_03415.png b/images/Shaft_03415.png new file mode 100644 index 0000000000000000000000000000000000000000..512dff73816570aa015e0e439c064d80245dc99c --- /dev/null +++ b/images/Shaft_03415.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8cced14aaa49bdb440424050e4c54eae713a0a0225eac01deba801cbe3c6a9be +size 73819 diff --git a/images/Shaft_03416.png b/images/Shaft_03416.png new file mode 100644 index 0000000000000000000000000000000000000000..d8bb98f906fe161a02be75d7fa5da99d41a60a56 --- /dev/null +++ b/images/Shaft_03416.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d67b0eef4449b1e2bfa58829e7bb11116d4c1f61a4f0088af4462b03687272d9 +size 90523 diff --git a/images/Shaft_03417.png b/images/Shaft_03417.png new file mode 100644 index 0000000000000000000000000000000000000000..29c5a2532f6ebf1dda867b88a45af7aa9309d369 --- /dev/null +++ b/images/Shaft_03417.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa7262f415da5a0001eb233eabcf1cac07f05a6b24d9427a60417e14ae7317d3 +size 78589 diff --git a/images/Shaft_03418.png b/images/Shaft_03418.png new file mode 100644 index 0000000000000000000000000000000000000000..3cdf04359ab628404144eb7b3272d7b409e001da --- /dev/null +++ b/images/Shaft_03418.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a236487831aec7162aba98a61da5750f9ca99a71f474d881c1686e62e4a9e2ed +size 98533 diff --git a/images/Shaft_03419.png b/images/Shaft_03419.png new file mode 100644 index 0000000000000000000000000000000000000000..062c787b021da0afb43c5e2edd21c65ba0a5782a --- /dev/null +++ b/images/Shaft_03419.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ffecc74ea79ed6e0e0a46ac5c6c9d6a5d3f9b13dacd122fcc95c034908ffc32 +size 79761 diff --git a/images/Shaft_03420.png b/images/Shaft_03420.png new file mode 100644 index 0000000000000000000000000000000000000000..395e599bd98cad4330bcdbf2b9910bea621c5492 --- /dev/null +++ b/images/Shaft_03420.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb5ceaea01990f4eea0903710d278301fe5f4c21b6046cc51d989d82ab41bc94 +size 102378 diff --git a/images/Shaft_03421.png b/images/Shaft_03421.png new file mode 100644 index 0000000000000000000000000000000000000000..27e0e0696d51d27acabea17e50928f6968f48acf --- /dev/null +++ b/images/Shaft_03421.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74a29f654ee40754652f36866e69d457c9cb6c0e8d81fcc730af6ef6068f35e3 +size 98480 diff --git a/images/Shaft_03422.png b/images/Shaft_03422.png new file mode 100644 index 0000000000000000000000000000000000000000..878504ccfbc84ba60056004a0bab92a7f009bdb9 --- /dev/null +++ b/images/Shaft_03422.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:206608b4d3a8de6b814207c759dafb9dfb7ecd5d31cd8f930ce08deb22dbdc29 +size 90849 diff --git a/images/Shaft_03423.png b/images/Shaft_03423.png new file mode 100644 index 0000000000000000000000000000000000000000..abb70e9fa40f24a0e24f545bcd64470f3491ec4c --- /dev/null +++ b/images/Shaft_03423.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd621ef81fc1bccfd64a07868b63d31522bfc3bcec7115956e5e779522643965 +size 100830 diff --git a/images/Shaft_03424.png b/images/Shaft_03424.png new file mode 100644 index 0000000000000000000000000000000000000000..1ca0a7d5ded860cf6ef2cfa57346402a1420e556 --- /dev/null +++ b/images/Shaft_03424.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a62764f66942097c3ff4ca4430ca70eb41cb4b632cfda803ba5b71f24e0c30a2 +size 91675 diff --git a/images/Shaft_03425.png b/images/Shaft_03425.png new file mode 100644 index 0000000000000000000000000000000000000000..d6408ac47708dca3faa04cb25ae1d3b5207973d0 --- /dev/null +++ b/images/Shaft_03425.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b43f22c140f470c773c2cbb0d1f0fe2d8e89518b695a61dd88e8b2f480e85dc5 +size 75369 diff --git a/images/Shaft_03426.png b/images/Shaft_03426.png new file mode 100644 index 0000000000000000000000000000000000000000..ea1caa1d7c87266c1e36af666ce867aaf3e6e02b --- /dev/null +++ b/images/Shaft_03426.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1775de0f7eebdc2f3c2e42d5832f80c1dce5884719658d2926b9f3604f10d04a +size 109656 diff --git a/images/Shaft_03427.png b/images/Shaft_03427.png new file mode 100644 index 0000000000000000000000000000000000000000..fff3e1b11668c785cd2e0ed9806a4b4105729d0b --- /dev/null +++ b/images/Shaft_03427.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:402d6eab866f365010d3eab38f379bd0162e65b5a9ad0340a7a00d6751003a1f +size 72816 diff --git a/images/Shaft_03428.png b/images/Shaft_03428.png new file mode 100644 index 0000000000000000000000000000000000000000..b36fa4b60c50d451d4010634664335ba6dee5d9b --- /dev/null +++ b/images/Shaft_03428.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4319505ffc05d7554eb573e2204aebd7b877b0d3e8bb6363ce7875751838e2c4 +size 98388 diff --git a/images/Shaft_03429.png b/images/Shaft_03429.png new file mode 100644 index 0000000000000000000000000000000000000000..e28290f80806624d35f8d39645b3502e5910b0f0 --- /dev/null +++ b/images/Shaft_03429.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7263163417aea916cda56486b295c8eaf39bc681cafbcefd27316541af5e12b +size 100416 diff --git a/images/Shaft_03430.png b/images/Shaft_03430.png new file mode 100644 index 0000000000000000000000000000000000000000..af45d73d839b598967af10f78b619bfabac43dc1 --- /dev/null +++ b/images/Shaft_03430.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a26b6368c1de6da89545bc039a039a9e0257e8d916fb2f5b841df884895176bb +size 108402 diff --git a/images/Shaft_03431.png b/images/Shaft_03431.png new file mode 100644 index 0000000000000000000000000000000000000000..15282868beb4eff6fc8d3da30853408f1da7c613 --- /dev/null +++ b/images/Shaft_03431.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe88b35663e301d22a85eb00cfc4b56dc53ec21bf21683c66bf372fa00d99916 +size 86299 diff --git a/images/Shaft_03432.png b/images/Shaft_03432.png new file mode 100644 index 0000000000000000000000000000000000000000..c2454f0c5c3e92d5560e0564f4ba3c9d2a2376ab --- /dev/null +++ b/images/Shaft_03432.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c730a299a06d04749fb9de61af738f360e2f7f04fabc7b8e0189a099918c7df1 +size 81656 diff --git a/images/Shaft_03433.png b/images/Shaft_03433.png new file mode 100644 index 0000000000000000000000000000000000000000..7c78610f77dd5bb90f56d2e7291eb7fe374efcac --- /dev/null +++ b/images/Shaft_03433.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c548482037df0e863ba94df38c770c27dbf713f9f5ae43180627c70a1307c916 +size 77021 diff --git a/images/Shaft_03434.png b/images/Shaft_03434.png new file mode 100644 index 0000000000000000000000000000000000000000..55b09633ff8465a4ea07b996464dcf41a9be89b4 --- /dev/null +++ b/images/Shaft_03434.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e105214c0aeba1be36e147331cb5aea8af47a82272ac76704a0b41026bc0da58 +size 74120 diff --git a/images/Shaft_03435.png b/images/Shaft_03435.png new file mode 100644 index 0000000000000000000000000000000000000000..1957485b9f51915cd4105bc20619639f735a6f0c --- /dev/null +++ b/images/Shaft_03435.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f190b981d8606473ca1a086ac3710a15c1145ede680d23e599ae6075bc56f07b +size 68100 diff --git a/images/Shaft_03436.png b/images/Shaft_03436.png new file mode 100644 index 0000000000000000000000000000000000000000..641cee4c0f410e3e7b4771217cb9e658074a9bf8 --- /dev/null +++ b/images/Shaft_03436.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d127d04ebe4146076f7c46ad92914d864318c58a91b3271c3b725cf4ece81735 +size 102914 diff --git a/images/Shaft_03437.png b/images/Shaft_03437.png new file mode 100644 index 0000000000000000000000000000000000000000..d4c22c30c89bd7994fe3e42e41d579e9a0afe8d4 --- /dev/null +++ b/images/Shaft_03437.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e16374f2d026b9ba687dd76a6a71210982611f7213cb13df27303451c091043 +size 79330 diff --git a/images/Shaft_03438.png b/images/Shaft_03438.png new file mode 100644 index 0000000000000000000000000000000000000000..d0b65b537935f6ebea9258a30bf50357d53b8865 --- /dev/null +++ b/images/Shaft_03438.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd5614212ae7244e9846ba29a61b69352a63ab0ee38d129fa5fca5dd5018424d +size 71033 diff --git a/images/Shaft_03439.png b/images/Shaft_03439.png new file mode 100644 index 0000000000000000000000000000000000000000..4b31c0c2e253ef9d4fb453c065d3e0e3a347392b --- /dev/null +++ b/images/Shaft_03439.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7615c87a80ae10c4ce53a8ca0c83717774776ba992168cb95cebfdadf2383dac +size 101169 diff --git a/images/Shaft_03440.png b/images/Shaft_03440.png new file mode 100644 index 0000000000000000000000000000000000000000..3fe42df8182ee41b8eb5b2a363c9e3e6ad8b27a4 --- /dev/null +++ b/images/Shaft_03440.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2451c1a1e15f3d322ae842647b437af1c254707b1234787acd1dd327f2d9bd8 +size 100733 diff --git a/images/Shaft_03441.png b/images/Shaft_03441.png new file mode 100644 index 0000000000000000000000000000000000000000..1a32737dd03ef04de41957622f7a9548f6a55ac9 --- /dev/null +++ b/images/Shaft_03441.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b7f6b2f9a3f7c86d522c122d4cda66268e6a5b3fbca220cc951b2e20ec763e9 +size 68637 diff --git a/images/Shaft_03442.png b/images/Shaft_03442.png new file mode 100644 index 0000000000000000000000000000000000000000..7f08b84717f78a422a224ccab62649f563ef04d2 --- /dev/null +++ b/images/Shaft_03442.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e80776ff9838a41cb821b77eafc11c7365bf1ea5882b75094bf213dbc66eb2bd +size 75507 diff --git a/images/Shaft_03443.png b/images/Shaft_03443.png new file mode 100644 index 0000000000000000000000000000000000000000..bce151be92143508dfaa7b24eaf669ae26075482 --- /dev/null +++ b/images/Shaft_03443.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e1394d4549c649606d9214273e7089d147a57ce913ecf4e703072d2e2f0f4e8 +size 77381 diff --git a/images/Shaft_03444.png b/images/Shaft_03444.png new file mode 100644 index 0000000000000000000000000000000000000000..f00805e4856999390a52a3e34b8b3d0afccf48fc --- /dev/null +++ b/images/Shaft_03444.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbe8599f3194385be72dc9c5abd4b4de607b22576dea77dd42e21256c39341e7 +size 104481 diff --git a/images/Shaft_03445.png b/images/Shaft_03445.png new file mode 100644 index 0000000000000000000000000000000000000000..469cd2c1878e62d018e39962cc3acceac3da2a41 --- /dev/null +++ b/images/Shaft_03445.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4afabce22f673b265e7f7db7e503e0c9bfeea48a084726d31b65a46a8b5a8f48 +size 74053 diff --git a/images/Shaft_03446.png b/images/Shaft_03446.png new file mode 100644 index 0000000000000000000000000000000000000000..238c176efa999275816ac44679154f37513e8a49 --- /dev/null +++ b/images/Shaft_03446.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:191b909087dde941253b32f5953e34cf926be19072dff20b25a86bc43fad3c39 +size 79680 diff --git a/images/Shaft_03447.png b/images/Shaft_03447.png new file mode 100644 index 0000000000000000000000000000000000000000..c581f50c832b3025d7035645bb329c11dd0d4deb --- /dev/null +++ b/images/Shaft_03447.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecb0e9e8b71fe06e4cacf2ad7762bd45677aead65a8033713268e014798b0165 +size 76095 diff --git a/images/Shaft_03448.png b/images/Shaft_03448.png new file mode 100644 index 0000000000000000000000000000000000000000..b5f78d2e51a2a7629eaea2a0e22ae67052eb5d9b --- /dev/null +++ b/images/Shaft_03448.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d79fcac5bd6b43e37efc3914d2567c924645713b88d06c179a0a6f841b254af +size 88693 diff --git a/images/Shaft_03449.png b/images/Shaft_03449.png new file mode 100644 index 0000000000000000000000000000000000000000..c644b4415e9fcafcc8796980e6264ee5b533bc8d --- /dev/null +++ b/images/Shaft_03449.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08ff3f3feb7b3c45ec0affa77062b7794c0fa7cca1f8d99ab854658639300810 +size 69258 diff --git a/images/Shaft_03450.png b/images/Shaft_03450.png new file mode 100644 index 0000000000000000000000000000000000000000..5954e58cc7b0013fbc72b4e3e06a9dc6f8b9e247 --- /dev/null +++ b/images/Shaft_03450.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f4d638ec0186e978ba69d7abf998f9cd0faf346647eb198efec080b0b79a311 +size 82893 diff --git a/images/Shaft_03451.png b/images/Shaft_03451.png new file mode 100644 index 0000000000000000000000000000000000000000..863e25ab44f7c4a7561e9a73dab1ec47e2087bf4 --- /dev/null +++ b/images/Shaft_03451.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbb8fb3bbd8217ef59117e5d00077557acbf89449366876ce7ee445d23bec66f +size 75973 diff --git a/images/Shaft_03452.png b/images/Shaft_03452.png new file mode 100644 index 0000000000000000000000000000000000000000..1239dbfa306ea9e110a2335971e93541a35f6e30 --- /dev/null +++ b/images/Shaft_03452.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ab494d36daa8b615760b1b6e99ebc7071c7f25b76034fc5407c8563fd79516c +size 99298 diff --git a/images/Shaft_03453.png b/images/Shaft_03453.png new file mode 100644 index 0000000000000000000000000000000000000000..c2882ea98714996e7a9711d9e04d3360c2f8973d --- /dev/null +++ b/images/Shaft_03453.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a39674b69340c80824550556fd1c14913f624a5aa437e42b784371e224f9a19c +size 79120 diff --git a/images/Shaft_03454.png b/images/Shaft_03454.png new file mode 100644 index 0000000000000000000000000000000000000000..01372c2158acc7f08ee59c5f69f3a785551aad54 --- /dev/null +++ b/images/Shaft_03454.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0ae082761df2a9657e50cc5813ac6fa270eca791a32cffec8ee66f0296c82c6 +size 72812 diff --git a/images/Shaft_03455.png b/images/Shaft_03455.png new file mode 100644 index 0000000000000000000000000000000000000000..ee76d8fbb406a0cd8fb06cd0b138bca8ac6b2809 --- /dev/null +++ b/images/Shaft_03455.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8996c7b1bd0902eb7ad8b7d3efa626986d289bbea8a259b44e7e0bec27f9b5c5 +size 72252 diff --git a/images/Shaft_03456.png b/images/Shaft_03456.png new file mode 100644 index 0000000000000000000000000000000000000000..977bc1920b37ae9a227a1e6a853b58872f730488 --- /dev/null +++ b/images/Shaft_03456.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa1f294fd2613a985e37a68d3e072907aa99bce44da766efe4d04aa21989ad79 +size 101053 diff --git a/images/Shaft_03457.png b/images/Shaft_03457.png new file mode 100644 index 0000000000000000000000000000000000000000..4b36025d3ed4f558781b1d65b63760479d79ea7f --- /dev/null +++ b/images/Shaft_03457.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bed83aa442995df7d8d0d92cfb6c7ddca59ebeb17068eb6def1facf09ee822ab +size 73355 diff --git a/images/Shaft_03458.png b/images/Shaft_03458.png new file mode 100644 index 0000000000000000000000000000000000000000..4d34be068d9e2c01f565c2d9b7b552deadd2f571 --- /dev/null +++ b/images/Shaft_03458.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e3973b5a402a383d5dede47760227fbf4a0b9124137c9b3e34d737085494095 +size 110631 diff --git a/images/Shaft_03459.png b/images/Shaft_03459.png new file mode 100644 index 0000000000000000000000000000000000000000..a184d32e7a2c608292735d99b81a6346ccdd912c --- /dev/null +++ b/images/Shaft_03459.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af0262f2675ec9b5a8681a1e59b0bec2b1af8585dc8a53295629dbb3a38202ff +size 99066 diff --git a/images/Shaft_03460.png b/images/Shaft_03460.png new file mode 100644 index 0000000000000000000000000000000000000000..8e17e7a3a1bd529ce6a5c128cf052e178c7ef7cb --- /dev/null +++ b/images/Shaft_03460.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:85fbfb32ae432a36dcb21d00586bd4fe84d76dda2643442d169982796b3a8de8 +size 106927 diff --git a/images/Shaft_03461.png b/images/Shaft_03461.png new file mode 100644 index 0000000000000000000000000000000000000000..babd4eaa6cab0761153db1071b45e597c6371008 --- /dev/null +++ b/images/Shaft_03461.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78987a63091be8c4bbc607b51b7f3dc6db3b4100a050c2b11e0607597392d169 +size 97730 diff --git a/images/Shaft_03462.png b/images/Shaft_03462.png new file mode 100644 index 0000000000000000000000000000000000000000..e9378d7196f3273df4c4ba778cb479df863fd72c --- /dev/null +++ b/images/Shaft_03462.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6d4fbab74947791a68bdbc5c07120791c6437f95a777a0ad7b69693a757bc15 +size 73468 diff --git a/images/Shaft_03463.png b/images/Shaft_03463.png new file mode 100644 index 0000000000000000000000000000000000000000..afb0e76cfcf253ad8805434550ae13bb295ecdd4 --- /dev/null +++ b/images/Shaft_03463.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab671d50640500436213f7dbc2e6ca454618f7c792af4c2ebf11885cd9b22a17 +size 98239 diff --git a/images/Shaft_03464.png b/images/Shaft_03464.png new file mode 100644 index 0000000000000000000000000000000000000000..0004e6c121636e7fcb9fbaa9ebeb6dfee84a2fbc --- /dev/null +++ b/images/Shaft_03464.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0752fa702c9c0bebf45d580c5672d8ab395791fdb9b4b1c5d0a142116ef9136 +size 71857 diff --git a/images/Shaft_03465.png b/images/Shaft_03465.png new file mode 100644 index 0000000000000000000000000000000000000000..5206afe7242fe485704c53ea8a03465a7a4bf1f7 --- /dev/null +++ b/images/Shaft_03465.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61e89e882d96c98ab30346543db23aa94103b5dd6fe82f4345ba8f2e440a622e +size 69970 diff --git a/images/Shaft_03466.png b/images/Shaft_03466.png new file mode 100644 index 0000000000000000000000000000000000000000..4cb2fe7b0c71512c867e7f116aadb7ed7cfae1a7 --- /dev/null +++ b/images/Shaft_03466.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84b8f71b5f2a4238c8253c8f6b282e2b9e9c6208478d90ca012f347dd6c25053 +size 93653 diff --git a/images/Shaft_03467.png b/images/Shaft_03467.png new file mode 100644 index 0000000000000000000000000000000000000000..fd0cda5acfb397e4369e93177ddd9712a0476c7a --- /dev/null +++ b/images/Shaft_03467.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0b38e6a398481bc635709af0b996eede0bd9553a4fcb0372bf77bee82b57dbef +size 92735 diff --git a/images/Shaft_03468.png b/images/Shaft_03468.png new file mode 100644 index 0000000000000000000000000000000000000000..580d9c40413b390c9f54c462d40735c5122ace7e --- /dev/null +++ b/images/Shaft_03468.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b16537eecc09c7f2b2f7be2d39e86653887d8d8d194c934ac47389556bb5c91b +size 104962 diff --git a/images/Shaft_03469.png b/images/Shaft_03469.png new file mode 100644 index 0000000000000000000000000000000000000000..f0881225c3720d8977853d78a89d67d782f6f9a2 --- /dev/null +++ b/images/Shaft_03469.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:314d530b961a783e3fd268af552010074e1638bfe467e2e674586b1b5931a8a6 +size 103079 diff --git a/images/Shaft_03470.png b/images/Shaft_03470.png new file mode 100644 index 0000000000000000000000000000000000000000..9b41a512dd2de718db09c5344708192981e68ef7 --- /dev/null +++ b/images/Shaft_03470.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc30cefa3f4e2d59247939d18cf94730f33979cfa8f476644f5aee144bfb8490 +size 109197 diff --git a/images/Shaft_03471.png b/images/Shaft_03471.png new file mode 100644 index 0000000000000000000000000000000000000000..b722b5ba266d06b2efc9d7e0702f42a61f86ae04 --- /dev/null +++ b/images/Shaft_03471.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13b3b836d5e07a8984a5aa7114aa5721a7bdfc8f549add0b98f30792b105db72 +size 70781 diff --git a/images/Shaft_03472.png b/images/Shaft_03472.png new file mode 100644 index 0000000000000000000000000000000000000000..5a7b01afeb942b1cba8cef67f8dfb33d69fa9249 --- /dev/null +++ b/images/Shaft_03472.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbb3bd9993ad568803a38ee7a92d9d3c2f73382e9e6e8d45f035c8f8e80b898f +size 77894 diff --git a/images/Shaft_03473.png b/images/Shaft_03473.png new file mode 100644 index 0000000000000000000000000000000000000000..c186897a7d64426db6e241f59d3ef6966d7d2e50 --- /dev/null +++ b/images/Shaft_03473.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:060e3fed4ec410607c3c7add660d4f008079d762223bdbad7bd5ddee532c22fb +size 69595 diff --git a/images/Shaft_03474.png b/images/Shaft_03474.png new file mode 100644 index 0000000000000000000000000000000000000000..8252b01708d9383c72b25d8506a89c2685d79688 --- /dev/null +++ b/images/Shaft_03474.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:978c3edd56012fcc0dfc79c31d4df3d7403d793f67f54ce0df4fa98923a0dbe8 +size 96910 diff --git a/images/Shaft_03475.png b/images/Shaft_03475.png new file mode 100644 index 0000000000000000000000000000000000000000..02a5bbe5c70a38f944296f04ecf1a6268c1d3dd4 --- /dev/null +++ b/images/Shaft_03475.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e38d6dccc2b83fc42b79f70d8ddcc9e8ccbe5413fbd4610a5913404846a89e0 +size 105818 diff --git a/images/Shaft_03476.png b/images/Shaft_03476.png new file mode 100644 index 0000000000000000000000000000000000000000..9ef327071f5bdff486087d91c5facf38c38fa678 --- /dev/null +++ b/images/Shaft_03476.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f06941b2818dbbada8dfae25b74064af5fba51724c2c1880510754112b76c80e +size 76941 diff --git a/images/Shaft_03477.png b/images/Shaft_03477.png new file mode 100644 index 0000000000000000000000000000000000000000..8c4807338c8ce313fd0b56e20a6d843367c033d8 --- /dev/null +++ b/images/Shaft_03477.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:daa7937b9f037c26b2a6e0d2166d6f7ee8ef71d5f746d137151c3040a0bed222 +size 89157 diff --git a/images/Shaft_03478.png b/images/Shaft_03478.png new file mode 100644 index 0000000000000000000000000000000000000000..e236d12f22112483211daacdb59fc70f5d8ef7a4 --- /dev/null +++ b/images/Shaft_03478.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45d41e018c81f9cca6115820cc8a2c9e3dd7a2987666ff62f4b667865b175f4c +size 71951 diff --git a/images/Shaft_03479.png b/images/Shaft_03479.png new file mode 100644 index 0000000000000000000000000000000000000000..dc559b75f28592901ad9c23dd443871fb44230a8 --- /dev/null +++ b/images/Shaft_03479.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c590ed1d10579d375a878afcf8a9240ad70aa5dffb10b18e054209769b38e6c +size 102457 diff --git a/images/Shaft_03480.png b/images/Shaft_03480.png new file mode 100644 index 0000000000000000000000000000000000000000..82557aa0f25e9f718db3c9e12ceac8ef623dea31 --- /dev/null +++ b/images/Shaft_03480.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95718c9c68a4bfdf24a5baf1f2d67902d9cd998b09694271ae6f7b9d00a73aa0 +size 84601 diff --git a/images/Shaft_03481.png b/images/Shaft_03481.png new file mode 100644 index 0000000000000000000000000000000000000000..c790848eaff7704ed713f6f80cdf54e2a2b19c45 --- /dev/null +++ b/images/Shaft_03481.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed50bf36fc6bc70c749ded45ed6d9b31864e6938990b7c59ec544d83e8b9c7d9 +size 94367 diff --git a/images/Shaft_03482.png b/images/Shaft_03482.png new file mode 100644 index 0000000000000000000000000000000000000000..72bacff6d93d8bbb50efc190bc542c96abc002b6 --- /dev/null +++ b/images/Shaft_03482.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0192ac4cee4a2e1d49d490a898a44059e6496debb47b52242ecc586943e9b2d6 +size 113356 diff --git a/images/Shaft_03483.png b/images/Shaft_03483.png new file mode 100644 index 0000000000000000000000000000000000000000..63e0c559ecd0fe65b73bacc0f0a334880ec66441 --- /dev/null +++ b/images/Shaft_03483.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c7c4571c5f7f11552a2df22510e26899fef4d32501641794d2fde8547ffa77e +size 94342 diff --git a/images/Shaft_03484.png b/images/Shaft_03484.png new file mode 100644 index 0000000000000000000000000000000000000000..831ef4a2c0457fa853e5b09223c3a33bb991a684 --- /dev/null +++ b/images/Shaft_03484.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0852970f7e2d79be933457aaf13589dddc64c8c6f1ba5bd3d928c5695ff1c9d7 +size 101300 diff --git a/images/Shaft_03485.png b/images/Shaft_03485.png new file mode 100644 index 0000000000000000000000000000000000000000..4f52e1fec08ad625b61ce799ee2f7d1e9232520c --- /dev/null +++ b/images/Shaft_03485.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8ea3a42fd3f5b7a8678ca94beefde68064791975635c117bf52a91f75acd9ee +size 85568 diff --git a/images/Shaft_03486.png b/images/Shaft_03486.png new file mode 100644 index 0000000000000000000000000000000000000000..6d081509af459c9533bd0fcf3d37452c7356abc0 --- /dev/null +++ b/images/Shaft_03486.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:769ec64774b4a65d78e9961c2c2961330603c8532780a72381bde99ff36bb262 +size 77547 diff --git a/images/Shaft_03487.png b/images/Shaft_03487.png new file mode 100644 index 0000000000000000000000000000000000000000..068b4ce8477b96e86aa8de1a2d54a4b1ed1aae84 --- /dev/null +++ b/images/Shaft_03487.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fe0e176c719056688a6f0410c39284b5ccb5e5e564a77af0d4994fdbd6a9a51 +size 92039 diff --git a/images/Shaft_03488.png b/images/Shaft_03488.png new file mode 100644 index 0000000000000000000000000000000000000000..ab5c6e87d132078cd737470e5466d3a0f0a45d2c --- /dev/null +++ b/images/Shaft_03488.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccdde2a75c76ecfab2dd9e51b0d4d69f7d94cf49fce493f1f090f57e2d2860e2 +size 97621 diff --git a/images/Shaft_03489.png b/images/Shaft_03489.png new file mode 100644 index 0000000000000000000000000000000000000000..84852ff67cf26fe128511d6b2ad29a571dca151a --- /dev/null +++ b/images/Shaft_03489.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f7e36493a1c870ad9e33110ae0755f00f973dbba61beb3eb5865964d62942bc +size 99952 diff --git a/images/Shaft_03490.png b/images/Shaft_03490.png new file mode 100644 index 0000000000000000000000000000000000000000..bd70e93e43448e84217eec25a9ac5cc4ba42eb7e --- /dev/null +++ b/images/Shaft_03490.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:671e07d1c0b368cee737e908b013ed470f2265fe2786ba737cbabc0a8e5d8f1d +size 81300 diff --git a/images/Shaft_03491.png b/images/Shaft_03491.png new file mode 100644 index 0000000000000000000000000000000000000000..989c1bf916e610b46e7e5756ae169d4e971646ab --- /dev/null +++ b/images/Shaft_03491.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:781082fd4c315f72b4a9edfec50dd1d9a6de08aaec572e41e3750a9d9cff4669 +size 68375 diff --git a/images/Shaft_03492.png b/images/Shaft_03492.png new file mode 100644 index 0000000000000000000000000000000000000000..9336c09262a70091b98c03acc0c708560d8fef75 --- /dev/null +++ b/images/Shaft_03492.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba9802f68b30610f41eabb83df572536f434e3379c622c6fb8e069805680c70a +size 71996 diff --git a/images/Shaft_03493.png b/images/Shaft_03493.png new file mode 100644 index 0000000000000000000000000000000000000000..e5e0efdcdddb58b3dde93c30c547ca01cf5cd79b --- /dev/null +++ b/images/Shaft_03493.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d22476b56d4c512544e9999f01fd8502ff7d44540bfdaad8e7f0c73c34525767 +size 105925 diff --git a/images/Shaft_03494.png b/images/Shaft_03494.png new file mode 100644 index 0000000000000000000000000000000000000000..17c60e10122cbb873b0d921559d19ee3121aa9e2 --- /dev/null +++ b/images/Shaft_03494.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:803f36f12137f02d320b06663f1de425af3b3da2cc2ae87999c1704e5228c53f +size 69161 diff --git a/images/Shaft_03495.png b/images/Shaft_03495.png new file mode 100644 index 0000000000000000000000000000000000000000..d4a1e56b6698072e03da5f14014aa0880ee58690 --- /dev/null +++ b/images/Shaft_03495.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcea6b6fceb656918550791bc16f6bbd82623bb86fb3da65459cb4f3feb04b82 +size 103122 diff --git a/images/Shaft_03496.png b/images/Shaft_03496.png new file mode 100644 index 0000000000000000000000000000000000000000..5bb6a686a2531d44136b70a63c71cbcda10937d3 --- /dev/null +++ b/images/Shaft_03496.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72ff13aca4f858e3187c9760760f623941f41cfb97201931f9417287d1455df6 +size 101890 diff --git a/images/Shaft_03497.png b/images/Shaft_03497.png new file mode 100644 index 0000000000000000000000000000000000000000..09aec6e1e87295065e97a2e6bdaebc024ddf7ed3 --- /dev/null +++ b/images/Shaft_03497.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9511189fe19afca098e23358c19add77bda111aedd67adf51cdcce7d3efbe5ab +size 72105 diff --git a/images/Shaft_03498.png b/images/Shaft_03498.png new file mode 100644 index 0000000000000000000000000000000000000000..09eae88204f574b0eac754acadc550f289db30f2 --- /dev/null +++ b/images/Shaft_03498.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05d95a109863d8957155e3dfb5446a1703455b252e66a48f497790831577df02 +size 83007 diff --git a/images/Shaft_03499.png b/images/Shaft_03499.png new file mode 100644 index 0000000000000000000000000000000000000000..b0be9acb295ccd48e65fac0c337b2356b10490d3 --- /dev/null +++ b/images/Shaft_03499.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52e460878a533304fdb4cacf3af0f071ee22fa6842bd78ea9b70b0dc89924b55 +size 94137 diff --git a/images/Shaft_03500.png b/images/Shaft_03500.png new file mode 100644 index 0000000000000000000000000000000000000000..987162ceb6235ba280f724279bf65447eddae1ba --- /dev/null +++ b/images/Shaft_03500.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad1de747ada969a378098907af37c7b29bdbc7f32a6953c09465ef4ba8806cc8 +size 83450 diff --git a/images/Shaft_03501.png b/images/Shaft_03501.png new file mode 100644 index 0000000000000000000000000000000000000000..b77197c6918fc19db568022371017ff0ff07be09 --- /dev/null +++ b/images/Shaft_03501.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cee3eabe77aa30bb474324a1cfc04b928bdcb23d707e0f95b09da8b2576484d +size 78569 diff --git a/images/Shaft_03502.png b/images/Shaft_03502.png new file mode 100644 index 0000000000000000000000000000000000000000..68b82a133bf8f2fd91c50c6bc1bf6cde43a35cd4 --- /dev/null +++ b/images/Shaft_03502.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b0110ea4b73a13db8ea72be8f232ce6782bcfd61a5d4b7ee145e5d1c7612259 +size 81669 diff --git a/images/Shaft_03503.png b/images/Shaft_03503.png new file mode 100644 index 0000000000000000000000000000000000000000..119bfa4e9c9faac87c055d03aaa503ec1bede7b8 --- /dev/null +++ b/images/Shaft_03503.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b8e528c1221f282ba2e7607d31077e35ef6aa8b1cf4e6b073acce77f727e0f4 +size 66342 diff --git a/images/Shaft_03504.png b/images/Shaft_03504.png new file mode 100644 index 0000000000000000000000000000000000000000..3bf9ee2cb328fa4360c4be1176a708cd91842442 --- /dev/null +++ b/images/Shaft_03504.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e332eca8179a40c3d756bda7d8fff81682bac9287be4fcffdc7a780dc24bce00 +size 88043 diff --git a/images/Shaft_03505.png b/images/Shaft_03505.png new file mode 100644 index 0000000000000000000000000000000000000000..ddfc4b008e805219a13c7ca273d506381bc4dd1b --- /dev/null +++ b/images/Shaft_03505.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44f55836c396100398ff3d6139ecb22c68b3dae731e4ef4cf5c18ea69cea6c72 +size 87045 diff --git a/images/Shaft_03506.png b/images/Shaft_03506.png new file mode 100644 index 0000000000000000000000000000000000000000..bb8137570cc6f7f263928eb69661dd2ec2b8fc5f --- /dev/null +++ b/images/Shaft_03506.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d65d96d47a1a5f2d68349eee68b8ca33aa2ce07cf4e5ca9eb5592ecf4203604 +size 81550 diff --git a/images/Shaft_03507.png b/images/Shaft_03507.png new file mode 100644 index 0000000000000000000000000000000000000000..d30529f0eac37ae5dfb0fa2c0e1fce3d890c0cba --- /dev/null +++ b/images/Shaft_03507.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:300df664abf183c5c9de59721b388ba2803ac8c4f4dded5c3f51ed0bba08fc00 +size 98919 diff --git a/images/Shaft_03508.png b/images/Shaft_03508.png new file mode 100644 index 0000000000000000000000000000000000000000..1e5a22d68e63a5da6cd0ad539cd21e19a9d61d1a --- /dev/null +++ b/images/Shaft_03508.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0ff0a8ac0430d4461988db95cc37bd42c32c6e54a92bdc80d96c2afaa348c19 +size 89557 diff --git a/images/Shaft_03509.png b/images/Shaft_03509.png new file mode 100644 index 0000000000000000000000000000000000000000..3401aad6c12dc9fd2dff088e38c99a0e7354a4fe --- /dev/null +++ b/images/Shaft_03509.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cd8a1008ad5cb50b6463eb5c879c80d8c947b3f57cdb7c3a413bdc1d18c409a +size 77347 diff --git a/images/Shaft_03510.png b/images/Shaft_03510.png new file mode 100644 index 0000000000000000000000000000000000000000..24e938673e836dffbac04ec2de77fbefc39833ea --- /dev/null +++ b/images/Shaft_03510.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcd26420b9751827be576b6c4240e9077a31b539bde2f13f2e89c3a2e4303855 +size 90093 diff --git a/images/Shaft_03511.png b/images/Shaft_03511.png new file mode 100644 index 0000000000000000000000000000000000000000..8e8b26fcf9ebef98baf78d5c6ebec8401c72bab6 --- /dev/null +++ b/images/Shaft_03511.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8062dfd04ea148ba30c75afc37d757e8fa693ba527dac088fb4deb82b7a3f345 +size 90597 diff --git a/images/Shaft_03512.png b/images/Shaft_03512.png new file mode 100644 index 0000000000000000000000000000000000000000..68508e9f80a180cf6b90a6f96dcb0f2e2a331f37 --- /dev/null +++ b/images/Shaft_03512.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06f70a670ac1bd9b3499ba2d6bc55719f9c5c91ccc6ba4d491e3c898ac7b4ea8 +size 84502 diff --git a/images/Shaft_03513.png b/images/Shaft_03513.png new file mode 100644 index 0000000000000000000000000000000000000000..075ad8f73c462acf09d0b1cb5b5bea172b697f03 --- /dev/null +++ b/images/Shaft_03513.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a8ef09ead6db37ac5aca7c6f9a9c285d129fcaaf97ac7d44ea501283d2df800 +size 107942 diff --git a/images/Shaft_03514.png b/images/Shaft_03514.png new file mode 100644 index 0000000000000000000000000000000000000000..901fa1b94fef273c6461a5636a86a53f0bec1377 --- /dev/null +++ b/images/Shaft_03514.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:314658f22ce907d43905edcea538e8b975695c9b123373a4689c396c492651ab +size 85332 diff --git a/images/Shaft_03515.png b/images/Shaft_03515.png new file mode 100644 index 0000000000000000000000000000000000000000..b4d0374b3cfd19cf7d4a64e0d09ad4ebbeed5b68 --- /dev/null +++ b/images/Shaft_03515.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1382d74ec0908523723c7750e640b1a51f55a7120db837e3bb12ddcce97ce1cd +size 69007 diff --git a/images/Shaft_03516.png b/images/Shaft_03516.png new file mode 100644 index 0000000000000000000000000000000000000000..dbdfe8a58ac5845b6d5366d4582acac59406d6fb --- /dev/null +++ b/images/Shaft_03516.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7668c594410cc94b8c8eeb6e77dc08df90f8ccd64407c09d1552ecfd2131a50e +size 102306 diff --git a/images/Shaft_03517.png b/images/Shaft_03517.png new file mode 100644 index 0000000000000000000000000000000000000000..5e85258cb3982bb5515f9f49a59f50835f989c3b --- /dev/null +++ b/images/Shaft_03517.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99a7f613ebf0b75b4960771cf0ddfdd2f6e66dc84d2baeeb7aea13647ddd5af2 +size 89168 diff --git a/images/Shaft_03518.png b/images/Shaft_03518.png new file mode 100644 index 0000000000000000000000000000000000000000..90d2897bbe4319a4d085d2405b0ad71b3027a3d4 --- /dev/null +++ b/images/Shaft_03518.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cfb6cd68a4949f1d5c5b09d0d93e177c8a5fe75374237471938c0973288ab223 +size 89593 diff --git a/images/Shaft_03519.png b/images/Shaft_03519.png new file mode 100644 index 0000000000000000000000000000000000000000..97e2c1e521409e81ae1f7aca6c23dc36399035cb --- /dev/null +++ b/images/Shaft_03519.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44658db39316cf9e0dd6367acb2fd6a7d98bd5447e1d37c40f95ed546d510608 +size 74102 diff --git a/images/Shaft_03520.png b/images/Shaft_03520.png new file mode 100644 index 0000000000000000000000000000000000000000..77452f3c4349cc40ed43794ff08d3159810887dd --- /dev/null +++ b/images/Shaft_03520.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c4fb3f7fbddf3f0f7e91a295420694680f91792110a603bacc86f24c42a6592 +size 74193 diff --git a/images/Shaft_03521.png b/images/Shaft_03521.png new file mode 100644 index 0000000000000000000000000000000000000000..013c1bf8d143dae5bd0a5c5edd829ca854f5d3f4 --- /dev/null +++ b/images/Shaft_03521.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f25d6b3ea78269ce68044aa06b80cf50f7b30c226802e3fc7f7bf09d83a94b41 +size 69535 diff --git a/images/Shaft_03522.png b/images/Shaft_03522.png new file mode 100644 index 0000000000000000000000000000000000000000..a960ca44999e3cf497b1bf29a2c30796374dcc81 --- /dev/null +++ b/images/Shaft_03522.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1539f96e447787fbef49e0f7a95f8ff267ab5547df6f1c5ebbe5b117abf22127 +size 69005 diff --git a/images/Shaft_03523.png b/images/Shaft_03523.png new file mode 100644 index 0000000000000000000000000000000000000000..a8af1011611fd1754390aa20040a20905c758307 --- /dev/null +++ b/images/Shaft_03523.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f95298cfdc20f2a5d7eb277afe1d90f519161b4ad701fe546a740e637b7a97fb +size 83854 diff --git a/images/Shaft_03524.png b/images/Shaft_03524.png new file mode 100644 index 0000000000000000000000000000000000000000..5202d4ca1bf6c875423cbc07b06f5a38750f7d80 --- /dev/null +++ b/images/Shaft_03524.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84516df5605df15dbdec4f7d91cb55b37313d1f0cb23b6259f74a53636fccc26 +size 75171 diff --git a/images/Shaft_03525.png b/images/Shaft_03525.png new file mode 100644 index 0000000000000000000000000000000000000000..8e5fad2730783306730824d690f69868cc43982a --- /dev/null +++ b/images/Shaft_03525.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42c9cf1ccb97d30ce5b335a8b5b4ddef471e13726c94fa1958d5f3888bdb3105 +size 91385 diff --git a/images/Shaft_03526.png b/images/Shaft_03526.png new file mode 100644 index 0000000000000000000000000000000000000000..a0df6309e78b97b817df0d004425b202c371e24f --- /dev/null +++ b/images/Shaft_03526.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5083acf32d14e2c3be7e74d100b2dad1ee07d988853810a0ee3a15414369dee1 +size 94979 diff --git a/images/Shaft_03527.png b/images/Shaft_03527.png new file mode 100644 index 0000000000000000000000000000000000000000..20580e7d660181bf24e781f6a530adc410b38486 --- /dev/null +++ b/images/Shaft_03527.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5ebbc25779c237a297880b56f8e72a142e8d8cb0eb6131a0d8a1ce74d41293e +size 102586 diff --git a/images/Shaft_03528.png b/images/Shaft_03528.png new file mode 100644 index 0000000000000000000000000000000000000000..b56bd8721db29c16737c6a9d8b34e9605c033a8a --- /dev/null +++ b/images/Shaft_03528.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c583ad0846e6c4d74a75618860037ab0d68d80ffbff8cf551ebebfd883ae1bc0 +size 90716 diff --git a/images/Shaft_03529.png b/images/Shaft_03529.png new file mode 100644 index 0000000000000000000000000000000000000000..af5137cb2d3f0097873d15118d7c92be3fa1a3c0 --- /dev/null +++ b/images/Shaft_03529.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc2c45885e922f2e782ee2798ca8c7e6ea72ddb301c61038b2b6d7f88716c055 +size 81108 diff --git a/images/Shaft_03530.png b/images/Shaft_03530.png new file mode 100644 index 0000000000000000000000000000000000000000..c89a7ce9b0675533ccf013ad6b56dd524889dd3f --- /dev/null +++ b/images/Shaft_03530.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:97e78ab9c17255d30b157f77501026a5063b16f44c2912985ec43556160a92f2 +size 85931 diff --git a/images/Shaft_03531.png b/images/Shaft_03531.png new file mode 100644 index 0000000000000000000000000000000000000000..f14c4cb3b33decbfd11857700b8a631d48996421 --- /dev/null +++ b/images/Shaft_03531.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69367b35d00dfd0eccd66248e5dbd3942452b42b1eb7f9d7efe5644cb9847d6a +size 79831 diff --git a/images/Shaft_03532.png b/images/Shaft_03532.png new file mode 100644 index 0000000000000000000000000000000000000000..ce1c71d83a19998539a37678a473eefd7708edb6 --- /dev/null +++ b/images/Shaft_03532.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:acb874a9b3815059e20d798348fba1ec1a935376948f1f0bd02c3b3cd8d7bdea +size 80988 diff --git a/images/Shaft_03533.png b/images/Shaft_03533.png new file mode 100644 index 0000000000000000000000000000000000000000..f0f8b3a1123d36cbd8f510b8270c485e14b3c1cc --- /dev/null +++ b/images/Shaft_03533.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0818b6073b15e59f3a7ead376abc4fd371431b5bc0d85eca0000b2880ba75426 +size 103057 diff --git a/images/Shaft_03534.png b/images/Shaft_03534.png new file mode 100644 index 0000000000000000000000000000000000000000..e368c41d91d0f793bec8a70cbdc8c0f76634733e --- /dev/null +++ b/images/Shaft_03534.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc7a3b43c9f8b2c17002a1e538b1ace2442702e47379b9e1bb3c9f138a9f6c95 +size 90895 diff --git a/images/Shaft_03535.png b/images/Shaft_03535.png new file mode 100644 index 0000000000000000000000000000000000000000..fb13e2ee1dd523da957f1b4228afa4c3a12ba8e6 --- /dev/null +++ b/images/Shaft_03535.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6a398db88ee13952ee0c88b9dccf82a57d47badf898c02bd4fb5bd0dd727fb4 +size 81901 diff --git a/images/Shaft_03536.png b/images/Shaft_03536.png new file mode 100644 index 0000000000000000000000000000000000000000..8957089864b3ceb0cd7f1ca5137f18704ae66f10 --- /dev/null +++ b/images/Shaft_03536.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4da25f85858d26a918a6b18a0c7e55d8fc4b34c1463fdd21d7a08461cf336e4 +size 111499 diff --git a/images/Shaft_03537.png b/images/Shaft_03537.png new file mode 100644 index 0000000000000000000000000000000000000000..73a506179558a14e1cdc16ef6c3a71406485ba07 --- /dev/null +++ b/images/Shaft_03537.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e0a9eda1ab3e63c18346147b67529ab860861690c5b66e18b730e898f8f0879 +size 91785 diff --git a/images/Shaft_03538.png b/images/Shaft_03538.png new file mode 100644 index 0000000000000000000000000000000000000000..61431caa848607124560478fff8bdc35ca13d675 --- /dev/null +++ b/images/Shaft_03538.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e81c9fb6fb7dc4ace97f071114b96354e2cdb65a9a31ccd361dd57ee07344c5a +size 75527 diff --git a/images/Shaft_03539.png b/images/Shaft_03539.png new file mode 100644 index 0000000000000000000000000000000000000000..2f0ee9bc460d17440206d29cd252c35ed0e34c87 --- /dev/null +++ b/images/Shaft_03539.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f3ebf686c7f3bfbdb87c976fe68b57e164a04f8c427422f85a5d88d477c39b4 +size 75774 diff --git a/images/Shaft_03540.png b/images/Shaft_03540.png new file mode 100644 index 0000000000000000000000000000000000000000..eec5edb3ee430b7d00c64bb64d73e328edeb21dd --- /dev/null +++ b/images/Shaft_03540.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:003f2c086e1811fba6fa58bb7c8efafa8341d28304ef3314599b54769f929d0e +size 95837 diff --git a/images/Shaft_03541.png b/images/Shaft_03541.png new file mode 100644 index 0000000000000000000000000000000000000000..f59d22e93bd8f255d63f02a6ae2ac21384aaa905 --- /dev/null +++ b/images/Shaft_03541.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c704c1e97fa113f302162f979afdecbffcc130580a8c96ca102593e388824107 +size 94043 diff --git a/images/Shaft_03542.png b/images/Shaft_03542.png new file mode 100644 index 0000000000000000000000000000000000000000..8d2d07b33c0a343dcf71ddaadf050512fda3bd5a --- /dev/null +++ b/images/Shaft_03542.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90f0788dd659333d21a86e5a478dcbd636bd61c5bf4bd1f744334e6814545ca7 +size 99049 diff --git a/images/Shaft_03543.png b/images/Shaft_03543.png new file mode 100644 index 0000000000000000000000000000000000000000..f3c42d6ebbb807b61238bf32ca5f27e427752111 --- /dev/null +++ b/images/Shaft_03543.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55913ba15e5ae0c52bf1d138861716b6d2436924e9c4400a9fb672cb2459a31a +size 84133 diff --git a/images/Shaft_03544.png b/images/Shaft_03544.png new file mode 100644 index 0000000000000000000000000000000000000000..0a3c88be234b6271e0d14e64cd1ea35c256097bc --- /dev/null +++ b/images/Shaft_03544.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:564d865c981036210ef411f369fe59f0aeb8d2be96d3e7ec5e3fc24b99f959ca +size 83822 diff --git a/images/Shaft_03545.png b/images/Shaft_03545.png new file mode 100644 index 0000000000000000000000000000000000000000..502c0c76ff0b4a8153fbe89b7c540706c6390a93 --- /dev/null +++ b/images/Shaft_03545.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a05b0f90dd95bd02dbd35f77c0d69d6a26da59d6dd0d7ad91ea359ba07e0cc3d +size 69656 diff --git a/images/Shaft_03546.png b/images/Shaft_03546.png new file mode 100644 index 0000000000000000000000000000000000000000..e8146465343761f19ae8c08580bd50e7c66134f7 --- /dev/null +++ b/images/Shaft_03546.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca7ee030c7ed4fbaa4d231bed88ac3d8709e35f9e6bcd7ac04f071f0a329b81e +size 103771 diff --git a/images/Shaft_03547.png b/images/Shaft_03547.png new file mode 100644 index 0000000000000000000000000000000000000000..aee9d2d6605182df4b9b26a5671a984cffbf8d4b --- /dev/null +++ b/images/Shaft_03547.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6263d6b02ba623445aa971226c5a1ab528e69b21c7b7c08b6f4696d9e8ffb7f +size 79562 diff --git a/images/Shaft_03548.png b/images/Shaft_03548.png new file mode 100644 index 0000000000000000000000000000000000000000..b3033ce0e17e03531cf428f4b47031c977d8410c --- /dev/null +++ b/images/Shaft_03548.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:327782b9d985a873b0672bca1d39a5652319b8e372dc7ce6ad7e989e3b138e24 +size 97386 diff --git a/images/Shaft_03549.png b/images/Shaft_03549.png new file mode 100644 index 0000000000000000000000000000000000000000..4b8ab73e5a2bed102f367ba719c1e20130851227 --- /dev/null +++ b/images/Shaft_03549.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b3477527132f4cfae33826cceef48633ad9fd410b069623cd9a023b62fb4066 +size 88816 diff --git a/images/Shaft_03550.png b/images/Shaft_03550.png new file mode 100644 index 0000000000000000000000000000000000000000..c94f812fdc7f6b74f6e8e5f0ac8390c55ad14dbc --- /dev/null +++ b/images/Shaft_03550.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17477e200367fa3e1a74b58941fde5d111d708ca330c220557abb665e418f04d +size 92507 diff --git a/images/Shaft_03551.png b/images/Shaft_03551.png new file mode 100644 index 0000000000000000000000000000000000000000..07f2adf46b320dda74041d9c96b4add95a53214a --- /dev/null +++ b/images/Shaft_03551.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:782f6da48a316dcf68d09459967c83abf689435cf32f5e15671ce5f4e71f2b22 +size 71543 diff --git a/images/Shaft_03552.png b/images/Shaft_03552.png new file mode 100644 index 0000000000000000000000000000000000000000..69b72c7c19d5fca99722ae3721fa98e77e3de05f --- /dev/null +++ b/images/Shaft_03552.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05252cd220c4b9850b6a33a74a61c963e9e1bab795d905259bea271149e96c11 +size 69273 diff --git a/images/Shaft_03553.png b/images/Shaft_03553.png new file mode 100644 index 0000000000000000000000000000000000000000..f6db86ba17a1c634561be075203a5cd170a22b8a --- /dev/null +++ b/images/Shaft_03553.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f30326b3dd84fc2a349ccdb945dda66dcbcc1af1bfbb4e7922b983bda684024 +size 90554 diff --git a/images/Shaft_03554.png b/images/Shaft_03554.png new file mode 100644 index 0000000000000000000000000000000000000000..9e7fff9440ef5b73e9d2c0d0b5023e0b5fec719b --- /dev/null +++ b/images/Shaft_03554.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d172f7c62bb9384617d93ab201eeecb66174c5c7bd43341bb8738a48b3ec81a +size 70669 diff --git a/images/Shaft_03555.png b/images/Shaft_03555.png new file mode 100644 index 0000000000000000000000000000000000000000..82dee84f2eba544067afa31c8c52ab5e1a9c4d66 --- /dev/null +++ b/images/Shaft_03555.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:166d1b46f67258bcfe5e21575010a78c6af5fec1b7f7e590a7201314babbafeb +size 70821 diff --git a/images/Shaft_03556.png b/images/Shaft_03556.png new file mode 100644 index 0000000000000000000000000000000000000000..aaad18b702f77df1d45cdaea9907dc3161bce730 --- /dev/null +++ b/images/Shaft_03556.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e7283f1583c5c5f0826afac3fd4e9dfa7eeed4a48a32ff0e5da570c66c9a1a2 +size 69913 diff --git a/images/Shaft_03557.png b/images/Shaft_03557.png new file mode 100644 index 0000000000000000000000000000000000000000..450a1fcb826eaaec5cb27629b85265f3518cac6f --- /dev/null +++ b/images/Shaft_03557.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f34da0e54075767e7a2ce884fbb57af024410cbbbf7feb4ff7dc064a08aef1b +size 79252 diff --git a/images/Shaft_03558.png b/images/Shaft_03558.png new file mode 100644 index 0000000000000000000000000000000000000000..2ff772d094e7a4b70ca7da28d2a2e9f87247841a --- /dev/null +++ b/images/Shaft_03558.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c44d690c05a1c468327b2a525b7b4e84d55366e3c29b7fc7f6e702d07227294 +size 73929 diff --git a/images/Shaft_03559.png b/images/Shaft_03559.png new file mode 100644 index 0000000000000000000000000000000000000000..30efa4d242f2d42ad51bc39c6697639870d8493e --- /dev/null +++ b/images/Shaft_03559.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b04f9d22d8cd6a54f99f8d60f312a3e6fbb53353efaa5965bea8d3d7284359fe +size 82061 diff --git a/images/Shaft_03560.png b/images/Shaft_03560.png new file mode 100644 index 0000000000000000000000000000000000000000..448927902b5aef08a579b7daa03cd5de4fbae4cb --- /dev/null +++ b/images/Shaft_03560.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33db835d6474ec224ee47ac373bb1ffb33527ee18affa07080d5804a97330296 +size 109347 diff --git a/images/Shaft_03561.png b/images/Shaft_03561.png new file mode 100644 index 0000000000000000000000000000000000000000..38213018cc4da2e0e6e780dd216089d543c68ff8 --- /dev/null +++ b/images/Shaft_03561.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7791f31e9193a1a173dd2114497f2a3de1acd59d5dca892119da947481a3910 +size 82360 diff --git a/images/Shaft_03562.png b/images/Shaft_03562.png new file mode 100644 index 0000000000000000000000000000000000000000..9ffdff9df5f2770b7b436bcb1fcb6bf2ed53d44c --- /dev/null +++ b/images/Shaft_03562.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54a90e1ba7caa56aa20e9f6431af431c550e40199088a80f3146cd25ba3a33b3 +size 87622 diff --git a/images/Shaft_03563.png b/images/Shaft_03563.png new file mode 100644 index 0000000000000000000000000000000000000000..7d47d4f9ccbe6ad8227d842032e33780637c4355 --- /dev/null +++ b/images/Shaft_03563.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25c529b93e64e2137754accd03ca0e838c6725019c2f3cb077a463e74ca9f5e4 +size 82758 diff --git a/images/Shaft_03564.png b/images/Shaft_03564.png new file mode 100644 index 0000000000000000000000000000000000000000..f55407eb0555c08156c9c992d24203376c3e4047 --- /dev/null +++ b/images/Shaft_03564.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3370640f52e10ab8fb3cdf46eca81f4f0fd919eebca948c4c641abec26d384aa +size 79805 diff --git a/images/Shaft_03565.png b/images/Shaft_03565.png new file mode 100644 index 0000000000000000000000000000000000000000..1989480749905ff96b507def37be03c113627c7e --- /dev/null +++ b/images/Shaft_03565.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac24fdc77f9fe4eedddae39c695f1eb95051388ef5ccc10b77374ab57a884202 +size 75881 diff --git a/images/Shaft_03566.png b/images/Shaft_03566.png new file mode 100644 index 0000000000000000000000000000000000000000..597f09d71b4b718cc90e7388456fd202c54b58ad --- /dev/null +++ b/images/Shaft_03566.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00fd8f90f62685d178a3def0d8443d73e64a743df5bbf46e0b5a053a0dce57c8 +size 103852 diff --git a/images/Shaft_03567.png b/images/Shaft_03567.png new file mode 100644 index 0000000000000000000000000000000000000000..b9a14e0d7bd3a6d0de34070f8f0fffd2fe48b023 --- /dev/null +++ b/images/Shaft_03567.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fbac4001f54fb9640f50bb7e872cf162418549ac1114846cab8a541611a24a0 +size 81153 diff --git a/images/Shaft_03568.png b/images/Shaft_03568.png new file mode 100644 index 0000000000000000000000000000000000000000..0e2027b1abb63ad8a3a3e0299e8339fd2f6437e9 --- /dev/null +++ b/images/Shaft_03568.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d367dd7dbcaa3669f7314a4d06fb14c04eb0462c296b3aad653f89dd06d28ca9 +size 95295 diff --git a/images/Shaft_03569.png b/images/Shaft_03569.png new file mode 100644 index 0000000000000000000000000000000000000000..954d6c002c9c5dac9471bddbee54018411445fb2 --- /dev/null +++ b/images/Shaft_03569.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4bde341dd3b4337e2037ed81ff64564a23a59963d64da0e97e94ce92c050c94 +size 88227 diff --git a/images/Shaft_03570.png b/images/Shaft_03570.png new file mode 100644 index 0000000000000000000000000000000000000000..52a569f307e5ac526ff1892775013f9b0ad729be --- /dev/null +++ b/images/Shaft_03570.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c17a9abf5bc58aaff13b6f9202cc9103b6fc954a777ab48052606025b1921b45 +size 93324 diff --git a/images/Shaft_03571.png b/images/Shaft_03571.png new file mode 100644 index 0000000000000000000000000000000000000000..3096679889a84718f001193ecdba26e49c20c46f --- /dev/null +++ b/images/Shaft_03571.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55869ccbcb014017f9d385f2034fea444234e87af36255a347a5d1307bd291d1 +size 69512 diff --git a/images/Shaft_03572.png b/images/Shaft_03572.png new file mode 100644 index 0000000000000000000000000000000000000000..c2af5c22559d86fc11cd6cd6a0517690cb9ba069 --- /dev/null +++ b/images/Shaft_03572.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2afc2b0f0950c9e46c254a4af1a6158ab61083f5684fe22a10cc9793335117d +size 83822 diff --git a/images/Shaft_03573.png b/images/Shaft_03573.png new file mode 100644 index 0000000000000000000000000000000000000000..0a2611d3da9c78436873e011977571d975bbb3b4 --- /dev/null +++ b/images/Shaft_03573.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f184770bcae06bcff9502bcd7bceb0ee39801274ef3f80e7601bf9439255449 +size 76209 diff --git a/images/Shaft_03574.png b/images/Shaft_03574.png new file mode 100644 index 0000000000000000000000000000000000000000..86ae14825f983793e494a118233d175f7a714405 --- /dev/null +++ b/images/Shaft_03574.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4cd7b5c53262c2a2e75bb91db33651c5713b9a3ba6bb4e395b25311c35fd75d +size 74004 diff --git a/images/Shaft_03575.png b/images/Shaft_03575.png new file mode 100644 index 0000000000000000000000000000000000000000..0586447827f2403fcdaac37cfd4fdf9adcc3d6a7 --- /dev/null +++ b/images/Shaft_03575.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a5ddda5342b8126357b52118237371c861b366242055da7d209008330269d1c +size 92634 diff --git a/images/Shaft_03576.png b/images/Shaft_03576.png new file mode 100644 index 0000000000000000000000000000000000000000..cb82806cb86c5b718b9e87ab837a7eb349c04168 --- /dev/null +++ b/images/Shaft_03576.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c80d8684c90712230cca3f2bc5f8849d37007aec955f8225b2fe6ae7cffa5d59 +size 74417 diff --git a/images/Shaft_03577.png b/images/Shaft_03577.png new file mode 100644 index 0000000000000000000000000000000000000000..82d47ea553b7138408da4ad4f513c532fa967355 --- /dev/null +++ b/images/Shaft_03577.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bade8508fd6ab321ce366e5dfbc59be6873dd4b0b09bc2c5ab7bd87c31286f1 +size 86559 diff --git a/images/Shaft_03578.png b/images/Shaft_03578.png new file mode 100644 index 0000000000000000000000000000000000000000..00fcc213d62f5b22fe92ce1997459bf65b97003e --- /dev/null +++ b/images/Shaft_03578.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1c708a513662c8ae07074c9144f6d2d1a38dc9c9f2b159c17e5d2dd4bf8ba32 +size 79245 diff --git a/images/Shaft_03579.png b/images/Shaft_03579.png new file mode 100644 index 0000000000000000000000000000000000000000..05a096fcbbb9cb9c22e92e3142f1dafaf8e8c08f --- /dev/null +++ b/images/Shaft_03579.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c60c4cf953525a8e5d480ecd12430c3605db0423812c66fe9db0ba4940df54f4 +size 96039 diff --git a/images/Shaft_03580.png b/images/Shaft_03580.png new file mode 100644 index 0000000000000000000000000000000000000000..e17072bd57a863186631d7b6d80268aac3cc8a20 --- /dev/null +++ b/images/Shaft_03580.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec3bf9eafea9ac628e6683ba719b660e8798435b8016c5bb3efe6205b20d4d30 +size 95127 diff --git a/images/Shaft_03581.png b/images/Shaft_03581.png new file mode 100644 index 0000000000000000000000000000000000000000..3faf7b62c868fc36dbe0c9656dc822c3b0d69bc5 --- /dev/null +++ b/images/Shaft_03581.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc08c67ffbbda28e269445d7fcdb63e5abf84c64b3ed1c78d36ccb26eeac8c57 +size 67629 diff --git a/images/Shaft_03582.png b/images/Shaft_03582.png new file mode 100644 index 0000000000000000000000000000000000000000..74efaa8649a679b5fb4b246596dd1d6576101cbc --- /dev/null +++ b/images/Shaft_03582.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:225915e8085d5045f1b2042c5d71f47ef539f1a06459316141d832099ea41468 +size 91807 diff --git a/images/Shaft_03583.png b/images/Shaft_03583.png new file mode 100644 index 0000000000000000000000000000000000000000..28faa17dde848dce24a3db1137a54767fc360ccd --- /dev/null +++ b/images/Shaft_03583.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c58524e7dbbc749a0e624b0e8709e71987ad63401d5266be45c63e61a2ee6646 +size 81827 diff --git a/images/Shaft_03584.png b/images/Shaft_03584.png new file mode 100644 index 0000000000000000000000000000000000000000..398b6c24017352d7f6b24f15566e8ffd63dedf7d --- /dev/null +++ b/images/Shaft_03584.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d93dd1e910cb516a71ce87ea3ac5f7d0d1e30abba2049f204a563450e0d1810 +size 99480 diff --git a/images/Shaft_03585.png b/images/Shaft_03585.png new file mode 100644 index 0000000000000000000000000000000000000000..5594f7009822b3b84c0fa8b36368a50b30d86c40 --- /dev/null +++ b/images/Shaft_03585.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4139177289f1baa67c99897d8d308319340f7e8d9b687b31c630677e1ee9cac6 +size 112309 diff --git a/images/Shaft_03586.png b/images/Shaft_03586.png new file mode 100644 index 0000000000000000000000000000000000000000..45b48183beb23cf438c87718c09dd11e332ec8ea --- /dev/null +++ b/images/Shaft_03586.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b763cd4e0c1f2b1ef155317d0468a93590ab4ea39174b4c93cec88e5f4641a4 +size 78218 diff --git a/images/Shaft_03587.png b/images/Shaft_03587.png new file mode 100644 index 0000000000000000000000000000000000000000..d0ed7b01cd08fef97820cdb24e320f05b375ec5b --- /dev/null +++ b/images/Shaft_03587.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef37a4e0f2001b813425877229f9eab8401c280906672352e0e2bb2f9a8a802a +size 95128 diff --git a/images/Shaft_03588.png b/images/Shaft_03588.png new file mode 100644 index 0000000000000000000000000000000000000000..cf08331627b59951ab52e869acc8f288e37ded98 --- /dev/null +++ b/images/Shaft_03588.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e69a818eecf5355b5b9d88efe01b3559bbca4c1cf2bef69a6d536966134f5a49 +size 75017 diff --git a/images/Shaft_03589.png b/images/Shaft_03589.png new file mode 100644 index 0000000000000000000000000000000000000000..23598d31afbbc30f4263d4afdb797b3d453e6acf --- /dev/null +++ b/images/Shaft_03589.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2523b5506caeba37ac7826caf92a5ac2fb0d6e4a2e24b50e2c07e46ce9523e5 +size 82819 diff --git a/images/Shaft_03590.png b/images/Shaft_03590.png new file mode 100644 index 0000000000000000000000000000000000000000..946f428d9afd5e00451acc4acb768c77b83c373f --- /dev/null +++ b/images/Shaft_03590.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ac67c33720a492951ea612930cf5e8b69e940580cc76a1315f121ec01f357bf +size 75057 diff --git a/images/Shaft_03591.png b/images/Shaft_03591.png new file mode 100644 index 0000000000000000000000000000000000000000..9417e19a7eb1440f76573bc1760414c3ef531048 --- /dev/null +++ b/images/Shaft_03591.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0db4ba6e25b2555dd04be2e12342b9f60b902babe628dc645e01b843220e0e65 +size 76239 diff --git a/images/Shaft_03592.png b/images/Shaft_03592.png new file mode 100644 index 0000000000000000000000000000000000000000..11dd446b37f99a5cad3e529c228ff8502a0566bf --- /dev/null +++ b/images/Shaft_03592.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:483261e2ee157606c3b622cd9853bb6726ba99f69e85ff8f2801a8ab46d0f61d +size 72541 diff --git a/images/Shaft_03593.png b/images/Shaft_03593.png new file mode 100644 index 0000000000000000000000000000000000000000..d0578b9c123ea83fbe325f486df9f44b089188e2 --- /dev/null +++ b/images/Shaft_03593.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bd61b1a5d678c82f53e15aaeb5453c5d8792f782a3a8997b148d9320dec2e84 +size 81666 diff --git a/images/Shaft_03594.png b/images/Shaft_03594.png new file mode 100644 index 0000000000000000000000000000000000000000..0bef4217e1a21f4cc8ad71b4a16abd8b8b5f1509 --- /dev/null +++ b/images/Shaft_03594.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1119bc335e2442f306d0995ef60ab8c224a986fba263681a727fa1de2162c393 +size 89204 diff --git a/images/Shaft_03595.png b/images/Shaft_03595.png new file mode 100644 index 0000000000000000000000000000000000000000..a8b6db300d96c7ea5ceace840b3992694e0c8806 --- /dev/null +++ b/images/Shaft_03595.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8b5f9f98db5764d850493f07387ae68f33bbe5da5d39f2fd57d4623674ff0bd +size 81277 diff --git a/images/Shaft_03596.png b/images/Shaft_03596.png new file mode 100644 index 0000000000000000000000000000000000000000..cd3f7890005ce5665274d38a625d0366101438ca --- /dev/null +++ b/images/Shaft_03596.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0e7748b1e9482e8e7f0c64ba3d42fe8c3dcdbcd37193310b43cbaedfac03414 +size 72347 diff --git a/images/Shaft_03597.png b/images/Shaft_03597.png new file mode 100644 index 0000000000000000000000000000000000000000..5fc0c54e61ab1fe7462154e3e937dc0246081873 --- /dev/null +++ b/images/Shaft_03597.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be8e427dd93f980f21dcf9e36d71b75f0f68a7b99d489312ad2331da59f6c117 +size 84294 diff --git a/images/Shaft_03598.png b/images/Shaft_03598.png new file mode 100644 index 0000000000000000000000000000000000000000..6907fb5adad558097d97f9403187eaf964a9ce16 --- /dev/null +++ b/images/Shaft_03598.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:002d9c12117376ea9bc3102788a0e2c11b600e99e16ad3aacacf43cce9ae1ca9 +size 94078 diff --git a/images/Shaft_03599.png b/images/Shaft_03599.png new file mode 100644 index 0000000000000000000000000000000000000000..5ad223060152c77eb33d94180f0651dd88baf71a --- /dev/null +++ b/images/Shaft_03599.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e5b0ecf56d6016f2bd0e1918458cf717fb71bf621cf17dfbc521bebece6aca4 +size 80793 diff --git a/images/Shaft_03600.png b/images/Shaft_03600.png new file mode 100644 index 0000000000000000000000000000000000000000..026f15b1b8abbbbf8ce0e5f30792ce56cbc906b8 --- /dev/null +++ b/images/Shaft_03600.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efc1015880ec2058b3fcab29adbef875d472acc3c847d3aaa39c7865282e535e +size 107063 diff --git a/images/Shaft_03601.png b/images/Shaft_03601.png new file mode 100644 index 0000000000000000000000000000000000000000..a14a79d6a27a3123832268f9976cea615a54dcbe --- /dev/null +++ b/images/Shaft_03601.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b01e5b5c902a3f6c673cec624a35846465e19e222e4828cb9cdae6a5c77f709d +size 71256 diff --git a/images/Shaft_03602.png b/images/Shaft_03602.png new file mode 100644 index 0000000000000000000000000000000000000000..a6a79f105c34ed9333bc3e8d8fe0c5e6ed573b9f --- /dev/null +++ b/images/Shaft_03602.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6e5120e749cb692ba39556ee7576eaf01f24bc19b67b62db13fcede493d5d2b +size 83180 diff --git a/images/Shaft_03603.png b/images/Shaft_03603.png new file mode 100644 index 0000000000000000000000000000000000000000..87a5814c67b327744669e2508a030514150dedd6 --- /dev/null +++ b/images/Shaft_03603.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d58a3c88771a76f303cef9c3f4bce6eb2e11327c6f126fe585bbadc9ed940158 +size 95293 diff --git a/images/Shaft_03604.png b/images/Shaft_03604.png new file mode 100644 index 0000000000000000000000000000000000000000..1d5dd5af3d18b27a634069950f306bd3ce6c104b --- /dev/null +++ b/images/Shaft_03604.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6f52a56df33be9c69117cff02f5ffc5374c058a460911f126e270f61173baf0 +size 72687 diff --git a/images/Shaft_03605.png b/images/Shaft_03605.png new file mode 100644 index 0000000000000000000000000000000000000000..91531dd81384db2e4cac068cf10765505a2b1597 --- /dev/null +++ b/images/Shaft_03605.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:636a01cf45f1c103de628514a4b707f70459cd47da5b6fa4e1102771c4c16281 +size 75726 diff --git a/images/Shaft_03606.png b/images/Shaft_03606.png new file mode 100644 index 0000000000000000000000000000000000000000..cbceb94da4156f47f2fcb2073cf36fa917f152bd --- /dev/null +++ b/images/Shaft_03606.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91e2c0384cce18b05b967e5a934ba2a4361ee62ce2e89c6bedf37c19b3e76a31 +size 74275 diff --git a/images/Shaft_03607.png b/images/Shaft_03607.png new file mode 100644 index 0000000000000000000000000000000000000000..19232d3a941aa374ebc404dc9e5a540f21e9042e --- /dev/null +++ b/images/Shaft_03607.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:713c72b4aff3706a974ba4bf109293dec42142b074bb8ca6d7106a7a20b0b59f +size 86453 diff --git a/images/Shaft_03608.png b/images/Shaft_03608.png new file mode 100644 index 0000000000000000000000000000000000000000..aadb244ce60f67ce40fc4b22ab3d0530110b87d3 --- /dev/null +++ b/images/Shaft_03608.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c13462dfb82d70a5b28747cc6d4e26b79cc2562007b4c3c18e28b509bd847948 +size 95442 diff --git a/images/Shaft_03609.png b/images/Shaft_03609.png new file mode 100644 index 0000000000000000000000000000000000000000..3e61122090bfd950e58bb6a4793304e1469183ef --- /dev/null +++ b/images/Shaft_03609.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ae9670206c41866ae4aa280e9256cb8d37ad61e3eef0ccaef51a04a1a1b8528 +size 95644 diff --git a/images/Shaft_03610.png b/images/Shaft_03610.png new file mode 100644 index 0000000000000000000000000000000000000000..dfe216c32087719b602f3b1e38c9ff98836ac7db --- /dev/null +++ b/images/Shaft_03610.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:146f5eede47b777f67a103437ae654f74ae125d2d3e1353a7e2afb57e0eaaf7c +size 79063 diff --git a/images/Shaft_03611.png b/images/Shaft_03611.png new file mode 100644 index 0000000000000000000000000000000000000000..fcccde912b7b750ca11bb48783582d5fe0977d25 --- /dev/null +++ b/images/Shaft_03611.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9774bf1fb0b56edfbd9feec8e5312a28fb5654685c7ab2b19876a9577e53b570 +size 104557 diff --git a/images/Shaft_03612.png b/images/Shaft_03612.png new file mode 100644 index 0000000000000000000000000000000000000000..518d380fd4b788f537739e41296f31a7fe32b1c5 --- /dev/null +++ b/images/Shaft_03612.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed4256c69815ac5ed7ec5dec5a78b82d2781888a8bf946979afb4668fb93b898 +size 95455 diff --git a/images/Shaft_03613.png b/images/Shaft_03613.png new file mode 100644 index 0000000000000000000000000000000000000000..804c6870e57a83e8899350a21145ea51254f4a18 --- /dev/null +++ b/images/Shaft_03613.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e297a651779ae97e830d5e46bf97a2b27f43856d620b4591c5a7e1ef4d70c55 +size 71513 diff --git a/images/Shaft_03614.png b/images/Shaft_03614.png new file mode 100644 index 0000000000000000000000000000000000000000..72d9e76cef520d7fc7523dce458cd40d00643eab --- /dev/null +++ b/images/Shaft_03614.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37b0e5baea1a56255f0a629fe2bd6d33155521e8e168ea43f7b04e932ba75321 +size 78227 diff --git a/images/Shaft_03615.png b/images/Shaft_03615.png new file mode 100644 index 0000000000000000000000000000000000000000..4c30c54353f89ee106dbc8b35289e9c3efef86f9 --- /dev/null +++ b/images/Shaft_03615.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05ebab87c8961ef3c4146361213fb6478683fcbf978463d9ebeb9c8043b7193f +size 84560 diff --git a/images/Shaft_03616.png b/images/Shaft_03616.png new file mode 100644 index 0000000000000000000000000000000000000000..545dd6d7c38f7d2485d7784003dfa8609232ba55 --- /dev/null +++ b/images/Shaft_03616.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef6043b20e4adda0796de6df03094235499a5d034d474c9401d96982aa3160cd +size 110121 diff --git a/images/Shaft_03617.png b/images/Shaft_03617.png new file mode 100644 index 0000000000000000000000000000000000000000..56da2cd22986142908d16b9547fd5f0e3507663a --- /dev/null +++ b/images/Shaft_03617.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2eb68345bb1d7472fb2cd0ab4a08a658ad7761e2ff21d35e269ff3271ac27c8 +size 98053 diff --git a/images/Shaft_03618.png b/images/Shaft_03618.png new file mode 100644 index 0000000000000000000000000000000000000000..67c9590395f705ced90a9baceefe73988cf66815 --- /dev/null +++ b/images/Shaft_03618.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41ead6b293ad33179cd274d14e443e47aca641a7c254894d00c92728fdeabfdf +size 86949 diff --git a/images/Shaft_03619.png b/images/Shaft_03619.png new file mode 100644 index 0000000000000000000000000000000000000000..a67195b345ec004c5877d3c787d0464d9342ac5c --- /dev/null +++ b/images/Shaft_03619.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f0ac131e389e73900a6230126d44893e67be7714742787e0111b72d58234968 +size 80276 diff --git a/images/Shaft_03620.png b/images/Shaft_03620.png new file mode 100644 index 0000000000000000000000000000000000000000..c29e46e06be86e50337ae31533affd229fd1372a --- /dev/null +++ b/images/Shaft_03620.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a60e67d8de3b3af317d3ce031a179dc9fed86705c1fceb8ed1e43775cb6c84a +size 102944 diff --git a/images/Shaft_03621.png b/images/Shaft_03621.png new file mode 100644 index 0000000000000000000000000000000000000000..afe3334910ef90eae29d78ca4b8592fbf1065789 --- /dev/null +++ b/images/Shaft_03621.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:362d83144570bc5cd9969568a802c223dde0389d5840afca5326e1245dd83945 +size 110013 diff --git a/images/Shaft_03622.png b/images/Shaft_03622.png new file mode 100644 index 0000000000000000000000000000000000000000..4631fcbcc8be39bf70955ab0aaacc8c5592b7cd5 --- /dev/null +++ b/images/Shaft_03622.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b59634618a494b233d9f2cce338267ceec40ac506da8a840e9d9606a8a71443 +size 94133 diff --git a/images/Shaft_03623.png b/images/Shaft_03623.png new file mode 100644 index 0000000000000000000000000000000000000000..786250423b321ed79cb16b4b2e69d38cec3ea385 --- /dev/null +++ b/images/Shaft_03623.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09b52b64097911f73a7526ed065f22ac46c1b36fd61c3609480a6cef8b279940 +size 70497 diff --git a/images/Shaft_03624.png b/images/Shaft_03624.png new file mode 100644 index 0000000000000000000000000000000000000000..5086049556c62d7a7e20f7843b524c2a1ca32c97 --- /dev/null +++ b/images/Shaft_03624.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e29c88f434c55b98c3b0c85fec0763cf592216da8b4478a16da6f681ac96e67 +size 75635 diff --git a/images/Shaft_03625.png b/images/Shaft_03625.png new file mode 100644 index 0000000000000000000000000000000000000000..bd266c4e5a115ff169acaedbf34b3d5c1f2a9eb4 --- /dev/null +++ b/images/Shaft_03625.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c7dfed99822520b2db54665e31d38135ef8792c48a1503af0def4ea4599f3b0 +size 75051 diff --git a/images/Shaft_03626.png b/images/Shaft_03626.png new file mode 100644 index 0000000000000000000000000000000000000000..92d61022c384a7b8c78d971ffada11d7b5922533 --- /dev/null +++ b/images/Shaft_03626.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:041acf5e9bea0c1d0c1e5b4e09b3f986f15b678b23ca3dcfadbbdd5521d94c27 +size 83012 diff --git a/images/Shaft_03627.png b/images/Shaft_03627.png new file mode 100644 index 0000000000000000000000000000000000000000..065fa03a00cf47d0dc00b8d9105960bc3344b52b --- /dev/null +++ b/images/Shaft_03627.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5e2375745a803fd3b249b6f1a4f536e1b6430bd99c29beca0e0d3f88876e0dd +size 104938 diff --git a/images/Shaft_03628.png b/images/Shaft_03628.png new file mode 100644 index 0000000000000000000000000000000000000000..8fb1d777a975929cf7b794d7eac390ef8fc1b970 --- /dev/null +++ b/images/Shaft_03628.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8223ab45a61bb30d5faffac81c4c72df9573bc3422b996aa4dc3466b6a29d717 +size 81945 diff --git a/images/Shaft_03629.png b/images/Shaft_03629.png new file mode 100644 index 0000000000000000000000000000000000000000..0d12b335ceedf9d5beb8926d210b7b92897c333a --- /dev/null +++ b/images/Shaft_03629.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f624d86bcd563eab10129e0723ec34f6cdc0aa3faa753aa457d33c6b6dfdf64 +size 82677 diff --git a/images/Shaft_03630.png b/images/Shaft_03630.png new file mode 100644 index 0000000000000000000000000000000000000000..2ec6d3d6d7194ce0d7c7c9e92cee0412b3430749 --- /dev/null +++ b/images/Shaft_03630.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bb0871f8d87f95bacdd64e06ff893fb233b6d26cbb9e45d4464cf59f9c15ae4 +size 92807 diff --git a/images/Shaft_03631.png b/images/Shaft_03631.png new file mode 100644 index 0000000000000000000000000000000000000000..c289b5ee89c2bcf3af8cfcb6ee6b5f2142d12a53 --- /dev/null +++ b/images/Shaft_03631.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0c5a8f47ef8282d374859a0e3fbb77143e35c137a4903f34af91f130e1e09e6 +size 84668 diff --git a/images/Shaft_03632.png b/images/Shaft_03632.png new file mode 100644 index 0000000000000000000000000000000000000000..7d3ccbbb2096d6cbc1e46b60d70e9dc4fef229fd --- /dev/null +++ b/images/Shaft_03632.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f46bb756905ff0587aedc5b3a78953c7c624c66bdf67cdbdf09cd0c6f6084752 +size 118229 diff --git a/images/Shaft_03633.png b/images/Shaft_03633.png new file mode 100644 index 0000000000000000000000000000000000000000..0d9c4f9dbeecc93ca01f180ded5aaceb15206f64 --- /dev/null +++ b/images/Shaft_03633.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5381f9a5ba331c7c46928a51c8687a06d810726092b9c67bf091fdc3d394e57 +size 96508 diff --git a/images/Shaft_03634.png b/images/Shaft_03634.png new file mode 100644 index 0000000000000000000000000000000000000000..ca4d7a66081a3fa641856ddf7dd15bfdaae68c66 --- /dev/null +++ b/images/Shaft_03634.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67c0d235a4e71346fb1e3ce1d9961803511b05c4d495b3850955ca441e2aa123 +size 107540 diff --git a/images/Shaft_03635.png b/images/Shaft_03635.png new file mode 100644 index 0000000000000000000000000000000000000000..ca14c208df3c006aff1580174dc4a6ae8d5adf15 --- /dev/null +++ b/images/Shaft_03635.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63828aa4971fe4bca63dee750199d8616973bc257a2e1a50f3c2e2c9f806c523 +size 111020 diff --git a/images/Shaft_03636.png b/images/Shaft_03636.png new file mode 100644 index 0000000000000000000000000000000000000000..d2aabdbf3bcd084834ab7f203682fb7f140f02b0 --- /dev/null +++ b/images/Shaft_03636.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75d1e7fdefccebacf18935adfaac95f57133ce2de8928826b46d378f235f4408 +size 106499 diff --git a/images/Shaft_03637.png b/images/Shaft_03637.png new file mode 100644 index 0000000000000000000000000000000000000000..fd79c938eb2c226d6b42c0d8b9f3663f4a40d7d3 --- /dev/null +++ b/images/Shaft_03637.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5932c7834887b3ebf2ef2a82619c61557b5c0f34c46e7f9caf2c02d69981e554 +size 82281 diff --git a/images/Shaft_03638.png b/images/Shaft_03638.png new file mode 100644 index 0000000000000000000000000000000000000000..4cfca16c6840d83fd7aad62560a8b0359c1b8a2e --- /dev/null +++ b/images/Shaft_03638.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:578b83e63113a174dc8db734876ce3aa9e5c5a6c48fe705427b5872fdc171b64 +size 71255 diff --git a/images/Shaft_03639.png b/images/Shaft_03639.png new file mode 100644 index 0000000000000000000000000000000000000000..2b5dd00459177b03f8adec5b9d0d4155d24045e3 --- /dev/null +++ b/images/Shaft_03639.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb0dbcbb3712095a06618af72df0eef508e8b35d050b21e5e8f888b91f252ddd +size 111243 diff --git a/images/Shaft_03640.png b/images/Shaft_03640.png new file mode 100644 index 0000000000000000000000000000000000000000..73f76202af9437518a26f9f0c74b0b8884b3da5f --- /dev/null +++ b/images/Shaft_03640.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:01672cf60101b7a91d848e96f8598b285cf92462b48d09b19b908b223d0c81f8 +size 87629 diff --git a/images/Shaft_03641.png b/images/Shaft_03641.png new file mode 100644 index 0000000000000000000000000000000000000000..330e3fb7cc1703705b7d9efce18c83d5b8970011 --- /dev/null +++ b/images/Shaft_03641.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6211441982e29a6253f47a8ae0565af98dd76b83b7fc3aa3996e6f1b6d940a4 +size 86004 diff --git a/images/Shaft_03642.png b/images/Shaft_03642.png new file mode 100644 index 0000000000000000000000000000000000000000..98a9df2967fe6c725167066cca7743756ceb2514 --- /dev/null +++ b/images/Shaft_03642.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6203b0b1c14283c467962943d7fc228850003ff81b470415224c70658fdb544 +size 69390 diff --git a/images/Shaft_03643.png b/images/Shaft_03643.png new file mode 100644 index 0000000000000000000000000000000000000000..ec6acdae0174be9b57c0d281953d5db15529a5e7 --- /dev/null +++ b/images/Shaft_03643.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fea6cd10f87f3c58c199652c80f1ad544f49480bf6356e08f9d209d1e90e3ee +size 87710 diff --git a/images/Shaft_03644.png b/images/Shaft_03644.png new file mode 100644 index 0000000000000000000000000000000000000000..3b947b52f0d24e7621597707618aff6a7f289e9f --- /dev/null +++ b/images/Shaft_03644.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6ab61ef1493359b60a29e9f40ba6ecd19977670cd54f3cdd16951e400410099 +size 110711 diff --git a/images/Shaft_03645.png b/images/Shaft_03645.png new file mode 100644 index 0000000000000000000000000000000000000000..146ac342c1e4e931959fb07fae7a514643e7499c --- /dev/null +++ b/images/Shaft_03645.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f43c78e63e9a4a4dd717d04fe3db36b474556c9acb80d41aa97fdcec216efd86 +size 90694 diff --git a/images/Shaft_03646.png b/images/Shaft_03646.png new file mode 100644 index 0000000000000000000000000000000000000000..b68c3b22795c314383a70b2976d1c64975d798e3 --- /dev/null +++ b/images/Shaft_03646.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a4ee2f654940117f31f888a94a6f832e93f5c0a81d719a899b6006080866ab3 +size 95625 diff --git a/images/Shaft_03647.png b/images/Shaft_03647.png new file mode 100644 index 0000000000000000000000000000000000000000..bc153725e07149e2b3fb4131012adbe29f10fdd9 --- /dev/null +++ b/images/Shaft_03647.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9f520c5c4982d84fb9294b1aef0691b375e0a22a5ec9af54815d4620404262e +size 101429 diff --git a/images/Shaft_03648.png b/images/Shaft_03648.png new file mode 100644 index 0000000000000000000000000000000000000000..ad7d045c9a6780b887e570d5699530f31c8b9447 --- /dev/null +++ b/images/Shaft_03648.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3fd0f2762438bd1bf133e254991c99ec5defa0ae274d2163e8e63638d0461992 +size 90196 diff --git a/images/Shaft_03649.png b/images/Shaft_03649.png new file mode 100644 index 0000000000000000000000000000000000000000..c2bf803e4593a3ed78de9a95b21fa0974158bdf1 --- /dev/null +++ b/images/Shaft_03649.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef73551e9e43406704d194f5c2afe24f88acd5bf114ad1a8688dd1f4b1bc5ef5 +size 91464 diff --git a/images/Shaft_03650.png b/images/Shaft_03650.png new file mode 100644 index 0000000000000000000000000000000000000000..781b950de9e05e8dfa9efb26c99f1586ac2f5be5 --- /dev/null +++ b/images/Shaft_03650.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e9b2bd685a4ac7955ba0fbcb4f1993887a2ab8e072ad1d34f0272947ec1492c +size 75646 diff --git a/images/Shaft_03651.png b/images/Shaft_03651.png new file mode 100644 index 0000000000000000000000000000000000000000..c1366c9656bb689236f6fc1979244d93f8d7e53f --- /dev/null +++ b/images/Shaft_03651.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1df343230666414eb828a591e0154fabf42906e5d8428a029f378105bc249f3 +size 73627 diff --git a/images/Shaft_03652.png b/images/Shaft_03652.png new file mode 100644 index 0000000000000000000000000000000000000000..a59b6d69856184c82b0e1517d5f188199ccdbd89 --- /dev/null +++ b/images/Shaft_03652.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18ea6d1eda092abca09a40733cceb3ce53eb0b5607b6d0a84f41aa55dbc55243 +size 106380 diff --git a/images/Shaft_03653.png b/images/Shaft_03653.png new file mode 100644 index 0000000000000000000000000000000000000000..ac70b9621726d0ac729ba130a714e7031629fed6 --- /dev/null +++ b/images/Shaft_03653.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:508cff2e7beab3eb04d65c6297c42ccf3f642f57fa93509d86000c1d02ed3514 +size 108126 diff --git a/images/Shaft_03654.png b/images/Shaft_03654.png new file mode 100644 index 0000000000000000000000000000000000000000..9d81f4c4e33d76cc4daaadb0e2b990a00e5a3ede --- /dev/null +++ b/images/Shaft_03654.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a32568372ef45936a549129d7120910b9e697364b4db4d9f2b7014b5401ac443 +size 70110 diff --git a/images/Shaft_03655.png b/images/Shaft_03655.png new file mode 100644 index 0000000000000000000000000000000000000000..aba79f5f2ebdb762bf8bf14278c7e0afe56d1ad5 --- /dev/null +++ b/images/Shaft_03655.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0548faf23e4eb8c8aa90ec1aa3ec12876af59cd844073cf26afd471f568ce525 +size 81959 diff --git a/images/Shaft_03656.png b/images/Shaft_03656.png new file mode 100644 index 0000000000000000000000000000000000000000..141f7a6277373dd632dfcff1558a14f74d7099b8 --- /dev/null +++ b/images/Shaft_03656.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5e2fe9fb6b75f6e03412dd0cd638c6d90147c0aa8ec7b63240608df167a8957 +size 100041 diff --git a/images/Shaft_03657.png b/images/Shaft_03657.png new file mode 100644 index 0000000000000000000000000000000000000000..5cb00785a66b8046c8c9cf616a4e32f98fab0437 --- /dev/null +++ b/images/Shaft_03657.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1a5fc7f47584974a1448069f41cbf97c1aa37857cafad80def86d5a04a8a89b +size 70705 diff --git a/images/Shaft_03658.png b/images/Shaft_03658.png new file mode 100644 index 0000000000000000000000000000000000000000..85436a07d19c73e58f4c91ab893f34c33c24c1f1 --- /dev/null +++ b/images/Shaft_03658.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96c64666dfe14bc6aec749b4d64adaba1d107748cf47aae89a1b696b594d4bf1 +size 97427 diff --git a/images/Shaft_03659.png b/images/Shaft_03659.png new file mode 100644 index 0000000000000000000000000000000000000000..526e6843d3afc0b25f566fba6677a0f4d6374609 --- /dev/null +++ b/images/Shaft_03659.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58d4e0fa930910e74987acbf43dacd4ce0daba3295736da38a997d686ff8fe7b +size 95213 diff --git a/images/Shaft_03660.png b/images/Shaft_03660.png new file mode 100644 index 0000000000000000000000000000000000000000..cefe2e177acbd6726ff24bfb3e277619bddcfcd7 --- /dev/null +++ b/images/Shaft_03660.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40fd0571830fc22684f6c8a99a59acf68f6276aa7ba7431d07f604a11dbef1f6 +size 81243 diff --git a/images/Shaft_03661.png b/images/Shaft_03661.png new file mode 100644 index 0000000000000000000000000000000000000000..f1c4fa2c29bf7b2138c98d5a5a2b7621b146e823 --- /dev/null +++ b/images/Shaft_03661.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba2a543c5521b73cf21572c9758c931db1b7b9ddade0d023b6574ac71f6cee65 +size 81970 diff --git a/images/Shaft_03662.png b/images/Shaft_03662.png new file mode 100644 index 0000000000000000000000000000000000000000..bcfecf2c96381f837a7b3fba7f800940d102ff9f --- /dev/null +++ b/images/Shaft_03662.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b554f876d4d0307fef582b0cf3d158f90d1018000fe805b34479665efeff9e67 +size 71722 diff --git a/images/Shaft_03663.png b/images/Shaft_03663.png new file mode 100644 index 0000000000000000000000000000000000000000..22aca786c76c471d268373716608bf670ce19813 --- /dev/null +++ b/images/Shaft_03663.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bcbaae98cd4cf7c9a96442f7be7dcd05a3d98f0af74977e508fe795fc36c083 +size 81409 diff --git a/images/Shaft_03664.png b/images/Shaft_03664.png new file mode 100644 index 0000000000000000000000000000000000000000..33ad3b0d0d66cae2044359a15d7821f0e984391f --- /dev/null +++ b/images/Shaft_03664.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5088ce99ca3dea6d0afe5c8879831e0fb7cf22612b7cb515bce010fa1c6d565a +size 111859 diff --git a/images/Shaft_03665.png b/images/Shaft_03665.png new file mode 100644 index 0000000000000000000000000000000000000000..0fe2e5902859f0df78500b9e904d1a8f0c1f8c5d --- /dev/null +++ b/images/Shaft_03665.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42ffe905f63006a06295dc81d122e255c3464cf4c6a262918c3c44813995c886 +size 99788 diff --git a/images/Shaft_03666.png b/images/Shaft_03666.png new file mode 100644 index 0000000000000000000000000000000000000000..77a308656f0a17da7484cff8f69974f60f49bf27 --- /dev/null +++ b/images/Shaft_03666.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66b7bf892ea09a470756d526ab438ad07779121869272e7b16bc321b62a0745f +size 111069 diff --git a/images/Shaft_03667.png b/images/Shaft_03667.png new file mode 100644 index 0000000000000000000000000000000000000000..06961862f4d9c698d288c57fdc2e2a398761a8ec --- /dev/null +++ b/images/Shaft_03667.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68c1afbfcf6a038654e3c725746d47af78fdbbd19f49e4160377e69a85f6744e +size 70874 diff --git a/images/Shaft_03668.png b/images/Shaft_03668.png new file mode 100644 index 0000000000000000000000000000000000000000..8f7fc2c14903fce1aaa56f9f11f437deb43cf295 --- /dev/null +++ b/images/Shaft_03668.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57850e724b9d9ee26342ca593899330e409f909256676480c293cc4461e456b5 +size 93356 diff --git a/images/Shaft_03669.png b/images/Shaft_03669.png new file mode 100644 index 0000000000000000000000000000000000000000..9c7493312f5e0d26b05cc9f5ca4106c688888833 --- /dev/null +++ b/images/Shaft_03669.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44c4d138a70c2a24b89cef91fe7e83725e095aeb3ee347af6bf67cfaa68052bf +size 68342 diff --git a/images/Shaft_03670.png b/images/Shaft_03670.png new file mode 100644 index 0000000000000000000000000000000000000000..2e20e92cc07978b74158b1ae165c66ab8e41b559 --- /dev/null +++ b/images/Shaft_03670.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8104ebaa8c9b184771106e4a427258b148912a15806fa7e063165d0964130311 +size 98917 diff --git a/images/Shaft_03671.png b/images/Shaft_03671.png new file mode 100644 index 0000000000000000000000000000000000000000..325574d87b7e66ad443ea9752e9a6a72f6709b14 --- /dev/null +++ b/images/Shaft_03671.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b9c8b0f6e0fa892a2874782013ffe68d1d235e63171b04330e40d8008ab3a945 +size 83059 diff --git a/images/Shaft_03672.png b/images/Shaft_03672.png new file mode 100644 index 0000000000000000000000000000000000000000..21f50c769a1b748f57c23b4d9fc05d658e41d3ce --- /dev/null +++ b/images/Shaft_03672.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c04315e1b10daadebe9763ce59adc1ac262636881d543b0bfee10f0a0cd9f306 +size 74545 diff --git a/images/Shaft_03673.png b/images/Shaft_03673.png new file mode 100644 index 0000000000000000000000000000000000000000..208aed7fc38cfb0add914839546374bdeedfab2f --- /dev/null +++ b/images/Shaft_03673.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbcb51b519bfd736100d65dd55ebb7c90b645f0d9a22ab1dcbc2778281d0a1ee +size 76504 diff --git a/images/Shaft_03674.png b/images/Shaft_03674.png new file mode 100644 index 0000000000000000000000000000000000000000..c279c3711110a92d737083bc67fb87129c6d1267 --- /dev/null +++ b/images/Shaft_03674.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7aeef19e2692a8fee0b3b8f1f17712c85caa46908a6f8c0c89c579707016178f +size 71691 diff --git a/images/Shaft_03675.png b/images/Shaft_03675.png new file mode 100644 index 0000000000000000000000000000000000000000..178d013bd70a2011528c5f2101fb0b986746041e --- /dev/null +++ b/images/Shaft_03675.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:848467a915b61e06753cf5f9754db04251e624b4639940b78165606f2686857a +size 79752 diff --git a/images/Shaft_03676.png b/images/Shaft_03676.png new file mode 100644 index 0000000000000000000000000000000000000000..2c4ef2b8a86040c19a94ba1146aa306bbcba3623 --- /dev/null +++ b/images/Shaft_03676.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a9a147707ba73846a78a69c60fc38b2f635690d71a8bddce4083d02dd317f40 +size 92402 diff --git a/images/Shaft_03677.png b/images/Shaft_03677.png new file mode 100644 index 0000000000000000000000000000000000000000..0b432ea367a3524187328fe4e83a7f33cb2efdfc --- /dev/null +++ b/images/Shaft_03677.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e9e506f02c4b8cc806714a7c2d70f49f27f8597987dece000c2f73769f34f18 +size 85546 diff --git a/images/Shaft_03678.png b/images/Shaft_03678.png new file mode 100644 index 0000000000000000000000000000000000000000..fae7e358489097c09fcd56181b50d8fe9576dee9 --- /dev/null +++ b/images/Shaft_03678.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61de44bd4f808a899728fe2fd6f657d07422f8fb2b1e463e7a1de7e7e2e2b6f0 +size 74279 diff --git a/images/Shaft_03679.png b/images/Shaft_03679.png new file mode 100644 index 0000000000000000000000000000000000000000..170ef3d1e55a4a556f8abecb06ba8f579f389bd1 --- /dev/null +++ b/images/Shaft_03679.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6e878c943235ca81f4ac8268c5cd32dc317a9f5596d2b8f734022f5528355a9f +size 84753 diff --git a/images/Shaft_03680.png b/images/Shaft_03680.png new file mode 100644 index 0000000000000000000000000000000000000000..3ad41b420d2ec3d80292afb3cc793acc523f5315 --- /dev/null +++ b/images/Shaft_03680.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef944b9b7bbde58f22d98935139a2a35cd3312b7564cb1c6902f3caf0d1c6be1 +size 84917 diff --git a/images/Shaft_03681.png b/images/Shaft_03681.png new file mode 100644 index 0000000000000000000000000000000000000000..e8954478da02a545e208e126aa7156d9509bd7c0 --- /dev/null +++ b/images/Shaft_03681.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f37ef08abc3ae7140011db7c1392374edbb42e85ec64a06c2dd6df6ac1fcf00c +size 74693 diff --git a/images/Shaft_03682.png b/images/Shaft_03682.png new file mode 100644 index 0000000000000000000000000000000000000000..2bbdffeab713614da2f9c738c3b8dbc5304c0af4 --- /dev/null +++ b/images/Shaft_03682.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f389927c3a8b3b8a6f5fabac9d87f0b842e94afeaffc993650c2b6b5335766ed +size 103806 diff --git a/images/Shaft_03683.png b/images/Shaft_03683.png new file mode 100644 index 0000000000000000000000000000000000000000..61fdbb6ae2c6b188233e45c51f281c34752de9f5 --- /dev/null +++ b/images/Shaft_03683.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a823b267a75889a4b59bd141b5f34b7d1a3a9bc469288b80d2cab2d256925748 +size 74638 diff --git a/images/Shaft_03684.png b/images/Shaft_03684.png new file mode 100644 index 0000000000000000000000000000000000000000..3b5db86e0f9b741afba35fc8f0609a820836a31a --- /dev/null +++ b/images/Shaft_03684.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af8d7d4e480d97f462c2194c952434867c8038a435077fcc1c47843131e310b7 +size 72298 diff --git a/images/Shaft_03685.png b/images/Shaft_03685.png new file mode 100644 index 0000000000000000000000000000000000000000..67cf11577e912fcdee4b6dbd94e8b14b24fb8d62 --- /dev/null +++ b/images/Shaft_03685.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:efddf8910c41d197a8d82db8a53795881899627eddd4593e8b9aca96188ca5af +size 83972 diff --git a/images/Shaft_03686.png b/images/Shaft_03686.png new file mode 100644 index 0000000000000000000000000000000000000000..782c51ebba746e6d4f82dab3bc586a67262e135f --- /dev/null +++ b/images/Shaft_03686.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d45a03bad6efab585d9de0d1948bb3f48946477633dc63cca250269a8ae5a953 +size 94941 diff --git a/images/Shaft_03687.png b/images/Shaft_03687.png new file mode 100644 index 0000000000000000000000000000000000000000..c872c77cd1b7d22c75026620adfdf8175cf1e97f --- /dev/null +++ b/images/Shaft_03687.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10cee6346ca879a61345459b4fe8222afbc3cf047ef782e6fb9a2722b2fd1dc0 +size 82813 diff --git a/images/Shaft_03688.png b/images/Shaft_03688.png new file mode 100644 index 0000000000000000000000000000000000000000..786bda0fbe6a11213bf5a7709bb35315a4e42bfc --- /dev/null +++ b/images/Shaft_03688.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:595aa7992c58ff70cb4a2fa4feb206876b0a55fee32681cd410a9569e3167243 +size 95425 diff --git a/images/Shaft_03689.png b/images/Shaft_03689.png new file mode 100644 index 0000000000000000000000000000000000000000..e9df5f34b3bbf02130b136b6952cce006581b2ab --- /dev/null +++ b/images/Shaft_03689.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f380d62a952537b478a297eb83d311e48780a9930f5833765b355e4bc84fe13a +size 93041 diff --git a/images/Shaft_03690.png b/images/Shaft_03690.png new file mode 100644 index 0000000000000000000000000000000000000000..30505e124b1770f148bad3bbc92dc43ae8746fa8 --- /dev/null +++ b/images/Shaft_03690.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:644dbe40f8bdfb23a4c723fa52c9b83ddd5c6d104c1bad44efcc493d8ef8607e +size 71801 diff --git a/images/Shaft_03691.png b/images/Shaft_03691.png new file mode 100644 index 0000000000000000000000000000000000000000..c7c905ac6790f35856d8ad79b3da066b883bd626 --- /dev/null +++ b/images/Shaft_03691.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:015a656e85c6b5672e99706fd987f1103fde5ca38e04c7e2ef6388469cd261d3 +size 69918 diff --git a/images/Shaft_03692.png b/images/Shaft_03692.png new file mode 100644 index 0000000000000000000000000000000000000000..6396a843818bcefafd35a78672d3a6dd0a22ff53 --- /dev/null +++ b/images/Shaft_03692.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c2a53f9b646f3153c52c86e3ad4d5e9a3d5ec64396567988503825b61e65ad3 +size 87233 diff --git a/images/Shaft_03693.png b/images/Shaft_03693.png new file mode 100644 index 0000000000000000000000000000000000000000..9225ac78499a344229be7bcabd2a0e4ba88bbddd --- /dev/null +++ b/images/Shaft_03693.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1e365adb0e7f98f049823adf6732d667326200743bce2f837c24c7eb86f2730 +size 94418 diff --git a/images/Shaft_03694.png b/images/Shaft_03694.png new file mode 100644 index 0000000000000000000000000000000000000000..7dc6ce56f3374d61e787d4bea1a90d9ec4fecf3e --- /dev/null +++ b/images/Shaft_03694.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9cbef4ef4b3d05e5e608fa06d2f68fc2442bc43618c03070f8d73babdaf1f58 +size 80032 diff --git a/images/Shaft_03695.png b/images/Shaft_03695.png new file mode 100644 index 0000000000000000000000000000000000000000..bba337aee2e3db3ba79995eb581601712befa597 --- /dev/null +++ b/images/Shaft_03695.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae28d6006f913cec2ea997435400a64c889a60083df74f53224d7864ce21efd6 +size 97913 diff --git a/images/Shaft_03696.png b/images/Shaft_03696.png new file mode 100644 index 0000000000000000000000000000000000000000..64589a0de6ee379597759f8376eaefd9d027e7b3 --- /dev/null +++ b/images/Shaft_03696.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a95ec4d62685c4de732f9d2aff65356f6232f8045c547780d0c5ff03a140253 +size 83121 diff --git a/images/Shaft_03697.png b/images/Shaft_03697.png new file mode 100644 index 0000000000000000000000000000000000000000..023807bfe31a324a0c2fe1f0a43562e3fde586df --- /dev/null +++ b/images/Shaft_03697.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2908ef857f0382473c8fb91fd1ae34d31023af875b6e965aceb8796d62cb2048 +size 77771 diff --git a/images/Shaft_03698.png b/images/Shaft_03698.png new file mode 100644 index 0000000000000000000000000000000000000000..cf32607269341c20e27c39799ac9402951f950d9 --- /dev/null +++ b/images/Shaft_03698.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5e8f1adc90d765ea6dadc1ee04e3b9f3605297b76c7f7e33e4ab99cd527fc89 +size 73053 diff --git a/images/Shaft_03699.png b/images/Shaft_03699.png new file mode 100644 index 0000000000000000000000000000000000000000..780636e29ca68aa5c04d12f5ea573ae123aa032d --- /dev/null +++ b/images/Shaft_03699.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d90560f45865a946da8e3f6d1728553c8f56f86bbbb2640468d7f12440c21320 +size 82701 diff --git a/images/Shaft_03700.png b/images/Shaft_03700.png new file mode 100644 index 0000000000000000000000000000000000000000..337240af6204c37e74c2aa4cd12d64e6e4142621 --- /dev/null +++ b/images/Shaft_03700.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a984af7e8161d90bce1b6f2ab1fd338085c06dd6c3d7eec6d244832e4e51ce8e +size 91152 diff --git a/images/Shaft_03701.png b/images/Shaft_03701.png new file mode 100644 index 0000000000000000000000000000000000000000..88bd76527236f3dbe1e2c4e16430b43719f6b17c --- /dev/null +++ b/images/Shaft_03701.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e09662df1bd8bf65ad6023aab6f3e1905288d7da2f65ff025252a6f353e612b +size 82761 diff --git a/images/Shaft_03702.png b/images/Shaft_03702.png new file mode 100644 index 0000000000000000000000000000000000000000..4c26d1deec3bb7883f139a6d686119e78ae0825e --- /dev/null +++ b/images/Shaft_03702.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f8ec7443558915f757fa0334ba6ecd183f880653354606d8cf0908b4f564aa8 +size 86182 diff --git a/images/Shaft_03703.png b/images/Shaft_03703.png new file mode 100644 index 0000000000000000000000000000000000000000..3c6740026a1082f64958c0cf3c6b4f9948ccf5dc --- /dev/null +++ b/images/Shaft_03703.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b055e76138614d58f6044590cd8ad78a6424772fbd5849a5b586c1a0ebb5eb8d +size 92527 diff --git a/images/Shaft_03704.png b/images/Shaft_03704.png new file mode 100644 index 0000000000000000000000000000000000000000..ebc4511c99205d6208b3541eeb2818188624c822 --- /dev/null +++ b/images/Shaft_03704.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d9bad1e08ebb7ae6a8285b3b7b8de070cfd6f9de1f1b1a23fefe165f04b7bd1 +size 81843 diff --git a/images/Shaft_03705.png b/images/Shaft_03705.png new file mode 100644 index 0000000000000000000000000000000000000000..ea82856d960fc213985a1c296189c454b925ae38 --- /dev/null +++ b/images/Shaft_03705.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c06c22f1fa7eb9f2994f55afd46b960ad68985f8077dc3edb087ac302a97471 +size 75936 diff --git a/images/Shaft_03706.png b/images/Shaft_03706.png new file mode 100644 index 0000000000000000000000000000000000000000..575a0b3cc99e0b9db004ce09a83baad4727943a5 --- /dev/null +++ b/images/Shaft_03706.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e97ea73acdbe674b2656a2376a68dd4f6445cb5cf96bbaa7afbbdffdff4069c0 +size 83773 diff --git a/images/Shaft_03707.png b/images/Shaft_03707.png new file mode 100644 index 0000000000000000000000000000000000000000..703297e407afc292ff8fafdb89f28334de9f3562 --- /dev/null +++ b/images/Shaft_03707.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:087e91297d935fc0219bc45936cfd8f041ece0237e9b721054a7c9028b106129 +size 109325 diff --git a/images/Shaft_03708.png b/images/Shaft_03708.png new file mode 100644 index 0000000000000000000000000000000000000000..6f5c8a3d3cab73f208487de7e20dd86328e28786 --- /dev/null +++ b/images/Shaft_03708.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3115d3c38c454d3640e29d3c565770bcf8bc3c5e34ae2f734854bd176c16961f +size 99147 diff --git a/images/Shaft_03709.png b/images/Shaft_03709.png new file mode 100644 index 0000000000000000000000000000000000000000..88004cf06d007a612e9010498b82f3817681f56b --- /dev/null +++ b/images/Shaft_03709.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9723be26734711caa704b62877cb089c1fffff090bbc0c6f46c89f075102886b +size 91141 diff --git a/images/Shaft_03710.png b/images/Shaft_03710.png new file mode 100644 index 0000000000000000000000000000000000000000..ea58682fa2b5fb62f960e19c21b688ea7bc0a584 --- /dev/null +++ b/images/Shaft_03710.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd940e366e05e6354444874503f33b8e905afdebe65bbe16173f55ddeb4fb6e2 +size 91088 diff --git a/images/Shaft_03711.png b/images/Shaft_03711.png new file mode 100644 index 0000000000000000000000000000000000000000..5f8252df55fcc84a19620a4463a938286b03886b --- /dev/null +++ b/images/Shaft_03711.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed9b454846c621abbb371a5b543981f5d1d03063ca0e9df497a1d31813e5a5cf +size 80316 diff --git a/images/Shaft_03712.png b/images/Shaft_03712.png new file mode 100644 index 0000000000000000000000000000000000000000..2fae5c33d87f381412f1c59a4739c114dbbfdbcf --- /dev/null +++ b/images/Shaft_03712.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:841ec33f03d8965dae345cbdbaf6a372d2eedf370f66f598e1d2bf2dfc41224c +size 71016 diff --git a/images/Shaft_03713.png b/images/Shaft_03713.png new file mode 100644 index 0000000000000000000000000000000000000000..56d46fa11f892c536103828d7bc3144c31445042 --- /dev/null +++ b/images/Shaft_03713.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fec343d2e16d50e64f70bbd2d24dd41c0e984459f0e0e59517e8ca70c1df79d8 +size 107265 diff --git a/images/Shaft_03714.png b/images/Shaft_03714.png new file mode 100644 index 0000000000000000000000000000000000000000..c5feab8cc5cff2ec11ae7b42da34ebbff4ba8e05 --- /dev/null +++ b/images/Shaft_03714.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bab893e20a5b9e6dbcfa1665783c7aa1d915694067b4c074735f70af7c9be59 +size 107217 diff --git a/images/Shaft_03715.png b/images/Shaft_03715.png new file mode 100644 index 0000000000000000000000000000000000000000..4059bdb877d5be2d4dd8be8cd8d4f98a76c9bedf --- /dev/null +++ b/images/Shaft_03715.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:514600667a47a71d2e6e3e4c1804f96c6f3e1859ec23da01b9207685866c7244 +size 73038 diff --git a/images/Shaft_03716.png b/images/Shaft_03716.png new file mode 100644 index 0000000000000000000000000000000000000000..26e8f528147f974fdbdc4df8cecbf69237f49a55 --- /dev/null +++ b/images/Shaft_03716.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06989bd5aa9f08a35bba030a92d188d0f74e1a5b05056774bec1edeae250ce9c +size 78070 diff --git a/images/Shaft_03717.png b/images/Shaft_03717.png new file mode 100644 index 0000000000000000000000000000000000000000..46081f278b3606dd1ad86dd30ce3825d0b00a193 --- /dev/null +++ b/images/Shaft_03717.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc85a58ef0f8494de1947d98f93b6609271bfb26b4c9422662cd6d78794ff9c3 +size 79287 diff --git a/images/Shaft_03718.png b/images/Shaft_03718.png new file mode 100644 index 0000000000000000000000000000000000000000..9ce0e6e893cb1d4d81ce4401e312be5218056eca --- /dev/null +++ b/images/Shaft_03718.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b22589101bf78be3ef47b91649ccc7430410d9ab04e5ebc1e635dc545d5439b5 +size 70086 diff --git a/images/Shaft_03719.png b/images/Shaft_03719.png new file mode 100644 index 0000000000000000000000000000000000000000..5d72bc5b3de852c174a2826839e31b0538fa0c9e --- /dev/null +++ b/images/Shaft_03719.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3b935604593662e2aea86addbcc985a2a1a196b8159c86f82b0d0b3b624702e +size 81268 diff --git a/images/Shaft_03720.png b/images/Shaft_03720.png new file mode 100644 index 0000000000000000000000000000000000000000..ca107e91915b1da1654f67ca26ef4a036b5f8297 --- /dev/null +++ b/images/Shaft_03720.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1a8cb43d206bb811c1138a2d7d3710769bd9d527a35a9e41a1d3636a03ac539 +size 72558 diff --git a/images/Shaft_03721.png b/images/Shaft_03721.png new file mode 100644 index 0000000000000000000000000000000000000000..b3d1a441e98c27e2ab52f0e2358538a4fe930518 --- /dev/null +++ b/images/Shaft_03721.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:071cb802a4cd6e0fa343bbc1590018186eebb09db13d026356a8ca43659ee385 +size 78616 diff --git a/images/Shaft_03722.png b/images/Shaft_03722.png new file mode 100644 index 0000000000000000000000000000000000000000..80eb208b6365a5ae0e60aad917f85ef69088dad6 --- /dev/null +++ b/images/Shaft_03722.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bb0040459a3fd51ed701667c124d3096e551408cdab4495da7bf0108ec77aaa +size 90033 diff --git a/images/Shaft_03723.png b/images/Shaft_03723.png new file mode 100644 index 0000000000000000000000000000000000000000..806559a205cba74768683769210f39226a70a842 --- /dev/null +++ b/images/Shaft_03723.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4e3a3653fea9bd745e2aa17742c8419ffc5b7942deabf8bacbc380e584c52cf +size 71551 diff --git a/images/Shaft_03724.png b/images/Shaft_03724.png new file mode 100644 index 0000000000000000000000000000000000000000..211035d283d038a60f737a4705ee76a5872869ee --- /dev/null +++ b/images/Shaft_03724.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:edc94429be32147947d681f278604d9190e72f0fe140b52c4648c064f7738299 +size 105556 diff --git a/images/Shaft_03725.png b/images/Shaft_03725.png new file mode 100644 index 0000000000000000000000000000000000000000..f6e7c85caac73f5b1b0f9dafc66158fa1db485be --- /dev/null +++ b/images/Shaft_03725.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34f5deed4c953519d4a2bdc6277193f66fcaf27a2c5a4ca67bf58c884b354773 +size 78858 diff --git a/images/Shaft_03726.png b/images/Shaft_03726.png new file mode 100644 index 0000000000000000000000000000000000000000..cfb09535e21e62b6190018ec364fe8b151c63e2d --- /dev/null +++ b/images/Shaft_03726.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ddcfb21571af75647dea26e494c0a2016d8213b2e24bbf61a112b47044868396 +size 86006 diff --git a/images/Shaft_03727.png b/images/Shaft_03727.png new file mode 100644 index 0000000000000000000000000000000000000000..8bcd1573275b9f4045c69802b88e6fe0c6295cfb --- /dev/null +++ b/images/Shaft_03727.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:732c8ee8b9b60fd22da54f1f9535bce2c390285f8ed5ecf3ddd4f2971c57d1de +size 76338 diff --git a/images/Shaft_03728.png b/images/Shaft_03728.png new file mode 100644 index 0000000000000000000000000000000000000000..c94601a9b3ed1ea8ee084c17baa04b86c91c9368 --- /dev/null +++ b/images/Shaft_03728.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a5dcb320ba7cc3e951951cc8661cce6a128572a984bc8bd9f504d018b43e243 +size 114702 diff --git a/images/Shaft_03729.png b/images/Shaft_03729.png new file mode 100644 index 0000000000000000000000000000000000000000..cd7406f0d8ca39e54fb4449239866f249d7c0eb2 --- /dev/null +++ b/images/Shaft_03729.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:359b29061d805e4c176c459275702cfa25a8cbfef0da95545b5beb1bae427239 +size 70831 diff --git a/images/Shaft_03730.png b/images/Shaft_03730.png new file mode 100644 index 0000000000000000000000000000000000000000..4a8878e04907f09b0789c6ca1bb76cef33c65b85 --- /dev/null +++ b/images/Shaft_03730.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ca02086133af4141ad034c7ee0d302ecc95643e3719e0bbcb5dd4847aef647c +size 96851 diff --git a/images/Shaft_03731.png b/images/Shaft_03731.png new file mode 100644 index 0000000000000000000000000000000000000000..079ce3534f82bb3390a7588ac3aa5825b2cb3e88 --- /dev/null +++ b/images/Shaft_03731.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b501fd6387a8a4749b992ecdf270dbb4008d68f0c0c81600038d5b2ee867ab6c +size 104161 diff --git a/images/Shaft_03732.png b/images/Shaft_03732.png new file mode 100644 index 0000000000000000000000000000000000000000..6107e9232fbc372f5dfd18107369f32d0dc5a123 --- /dev/null +++ b/images/Shaft_03732.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52c244420d22b2c9c02324ffcc6042f51a32d99b82caf7278ffc8be45bb237f9 +size 88847 diff --git a/images/Shaft_03733.png b/images/Shaft_03733.png new file mode 100644 index 0000000000000000000000000000000000000000..92082f1ff5afff1a58266f258096b325c1a319cb --- /dev/null +++ b/images/Shaft_03733.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2728bd5f024960d0de4447f0d30dee0aef0841e9510b0fce2423145054d516a5 +size 74715 diff --git a/images/Shaft_03734.png b/images/Shaft_03734.png new file mode 100644 index 0000000000000000000000000000000000000000..2ead4073e82c831a271ab038fb699be3359942d5 --- /dev/null +++ b/images/Shaft_03734.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f34bb2151c3132ef8d0bbdacce09db947261d521aa9de89d9c71678e7603dd6 +size 104404 diff --git a/images/Shaft_03735.png b/images/Shaft_03735.png new file mode 100644 index 0000000000000000000000000000000000000000..97c71fdccdf877c8e12af7e20b5d8f270510d69b --- /dev/null +++ b/images/Shaft_03735.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:280cb7033c111c303b9e3df8da6585a63015d8bc54b07aa4279711ae59d6bb88 +size 99906 diff --git a/images/Shaft_03736.png b/images/Shaft_03736.png new file mode 100644 index 0000000000000000000000000000000000000000..329b1bbce1d6e7c2cfa8283b5af010834eef5468 --- /dev/null +++ b/images/Shaft_03736.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c5d06b28179acc2ddd7584f9b8edd7d396a3db84e719d514460b8dc4bb0bfe9 +size 80986 diff --git a/images/Shaft_03737.png b/images/Shaft_03737.png new file mode 100644 index 0000000000000000000000000000000000000000..0fcd37ea2307d1a0e9aa606eb75ccc68147d573c --- /dev/null +++ b/images/Shaft_03737.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b66ef5cd0df7346a5db6f227af8b7d9b871fe751b385e93f315a2d5a59dae299 +size 92478 diff --git a/images/Shaft_03738.png b/images/Shaft_03738.png new file mode 100644 index 0000000000000000000000000000000000000000..525086ab67dd523c57e526733afbf2729ec957bf --- /dev/null +++ b/images/Shaft_03738.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a8084e0aae9e5fd570d59903e8b6302e7cf8d6ccb282eef65ab8d80cfb3c25c +size 74876 diff --git a/images/Shaft_03739.png b/images/Shaft_03739.png new file mode 100644 index 0000000000000000000000000000000000000000..4b295760a07ad953ddea42c64bfa497ffc065a77 --- /dev/null +++ b/images/Shaft_03739.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f90c483242cbf2488f7dee82f89b9789d92c7d07d6870d35527b45d0dcfaabc +size 71713 diff --git a/images/Shaft_03740.png b/images/Shaft_03740.png new file mode 100644 index 0000000000000000000000000000000000000000..92f9d03b549d71d956f661148e6894f2695e311e --- /dev/null +++ b/images/Shaft_03740.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:609afc11692e22b8ee62bd5c0d562f0e90738b1e2141c0e2bb2174ca911021db +size 106968 diff --git a/images/Shaft_03741.png b/images/Shaft_03741.png new file mode 100644 index 0000000000000000000000000000000000000000..143390da5802465df19680bb863c2f4b00fe0706 --- /dev/null +++ b/images/Shaft_03741.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9b26a6c905f7ad4fd79e8090c68bb0c0595370198ae009b943533f55bc59bd0 +size 75637 diff --git a/images/Shaft_03742.png b/images/Shaft_03742.png new file mode 100644 index 0000000000000000000000000000000000000000..379c4cc976ba0fed7a0a977ef95880a1e962a3d6 --- /dev/null +++ b/images/Shaft_03742.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f66b7c0a2a6be7050e809e69e0a38aee941546c54152b3bb561a8c29fce69a18 +size 103266 diff --git a/images/Shaft_03743.png b/images/Shaft_03743.png new file mode 100644 index 0000000000000000000000000000000000000000..42fc02dea3be13e1476e3c67c5c978d3bb2ba25d --- /dev/null +++ b/images/Shaft_03743.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f23fef9fa22e99352fc617bdb0cd2055ef126323f1018114a8ffcaca7b15e4db +size 87644 diff --git a/images/Shaft_03744.png b/images/Shaft_03744.png new file mode 100644 index 0000000000000000000000000000000000000000..af5cd6abda31463af805aed760fb1ac0a0798510 --- /dev/null +++ b/images/Shaft_03744.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e71d50c891078df44081459ccada4f74b8efe2477bd337b4f824cc4a2b0c96d3 +size 81217 diff --git a/images/Shaft_03745.png b/images/Shaft_03745.png new file mode 100644 index 0000000000000000000000000000000000000000..60ee4542d746e3c8b6dc7ebb0e1320600557824a --- /dev/null +++ b/images/Shaft_03745.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd6ae10b145fc2acea2217b8c4ebd7ad1bad418d3c1ef6ba3e38424785dfa757 +size 82121 diff --git a/images/Shaft_03746.png b/images/Shaft_03746.png new file mode 100644 index 0000000000000000000000000000000000000000..622e7a54af693002e26ae827ea6804837ef4d3c0 --- /dev/null +++ b/images/Shaft_03746.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:943dd42104e850a9bbad23632eef2790273c8682c36ae6ae1280d22cc248f159 +size 92338 diff --git a/images/Shaft_03747.png b/images/Shaft_03747.png new file mode 100644 index 0000000000000000000000000000000000000000..f353795565ebe98aee0e007c7f8da42d0c9c6460 --- /dev/null +++ b/images/Shaft_03747.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a39b8b9df4e64d3d9c8b6991cf1bc744af08be809345e50789a6484c76b2705 +size 88884 diff --git a/images/Shaft_03748.png b/images/Shaft_03748.png new file mode 100644 index 0000000000000000000000000000000000000000..bbd9ea15caacfe142d3e282f3d3d388bfffbf686 --- /dev/null +++ b/images/Shaft_03748.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d49c22cfcd35fcb3e4f77cade21653ab40d580f28434f0f204f7df65e5909fff +size 70380 diff --git a/images/Shaft_03749.png b/images/Shaft_03749.png new file mode 100644 index 0000000000000000000000000000000000000000..88d797603dec5d2a8852d590f83818c45a2cea12 --- /dev/null +++ b/images/Shaft_03749.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d55a2b86cae0587e5b5eb308ff1b210abfda60e0d7bc690821571a05d9817ca9 +size 79586 diff --git a/images/Shaft_03750.png b/images/Shaft_03750.png new file mode 100644 index 0000000000000000000000000000000000000000..33d8caf5a8885b22dc57eb1201423aad28911042 --- /dev/null +++ b/images/Shaft_03750.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c5a43b8ac61a09f0fad23f1aa1e07446a2b81e723879fb5a001a22d193f7f0d +size 79856 diff --git a/images/Shaft_03751.png b/images/Shaft_03751.png new file mode 100644 index 0000000000000000000000000000000000000000..3af593350778354f7fce16d4ec1c7f0da6bd65ac --- /dev/null +++ b/images/Shaft_03751.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b6c9067a6c507ecb05ad5066812a69ea89f15f8d7bf65fc23bf9533af4373cb +size 75642 diff --git a/images/Shaft_03752.png b/images/Shaft_03752.png new file mode 100644 index 0000000000000000000000000000000000000000..2ea165c72bec84f7f0d12dc2b51582dd062697e5 --- /dev/null +++ b/images/Shaft_03752.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1f02fe25e1ed19d0262c6aaabfac72b7cfd30fea9bcaf71798e0ace7ac46f9f +size 105954 diff --git a/images/Shaft_03753.png b/images/Shaft_03753.png new file mode 100644 index 0000000000000000000000000000000000000000..15d55a08d5ef17f4e5f1217dc19aa2904e6e7f69 --- /dev/null +++ b/images/Shaft_03753.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2abd428ecb106df63cac64f6baccaa44841ab80832787e0dca0b64f5f6ca9e39 +size 72294 diff --git a/images/Shaft_03754.png b/images/Shaft_03754.png new file mode 100644 index 0000000000000000000000000000000000000000..8941fefaa15dcd5098f7eb4fb7727e57a28e2f30 --- /dev/null +++ b/images/Shaft_03754.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73f07e87df0c58c3d4a3db009ace2e316ef799c0fb9412f507e198fba441c9a8 +size 76088 diff --git a/images/Shaft_03755.png b/images/Shaft_03755.png new file mode 100644 index 0000000000000000000000000000000000000000..3549c987f6bce482e0b5bee736ad1eb81045e90a --- /dev/null +++ b/images/Shaft_03755.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f96465803f7ac57e47f5198997e58dc7087271b6fe134e1ad99527685b4c63d +size 74142 diff --git a/images/Shaft_03756.png b/images/Shaft_03756.png new file mode 100644 index 0000000000000000000000000000000000000000..21951478b74e0665e5bbc3d2387fa2d0aeb8709e --- /dev/null +++ b/images/Shaft_03756.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abdce85141d302efe7ba8b167642f690f9d64d1f5ce360944323943013272676 +size 80221 diff --git a/images/Shaft_03757.png b/images/Shaft_03757.png new file mode 100644 index 0000000000000000000000000000000000000000..ffa86b7b4c8a8b53fe12517d92071c7fe823654a --- /dev/null +++ b/images/Shaft_03757.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9e60b09264caa6b17b2e695e23426ad20230918c91e6b27cef5bd5f7a406c25 +size 87392 diff --git a/images/Shaft_03758.png b/images/Shaft_03758.png new file mode 100644 index 0000000000000000000000000000000000000000..a634178841c6427a082359f7d1706c7fe2130642 --- /dev/null +++ b/images/Shaft_03758.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c588c41e33afb7b7094ceba070b1f7e393629c238f6253ac9813a0cb24b965f3 +size 109806 diff --git a/images/Shaft_03759.png b/images/Shaft_03759.png new file mode 100644 index 0000000000000000000000000000000000000000..3adf4a230e5af4c76a50c672f1150b0824b7f4d7 --- /dev/null +++ b/images/Shaft_03759.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b69d4906d041b052299328590130d272cd0135de00b44fef3d6b79c45c5b33a +size 85720 diff --git a/images/Shaft_03760.png b/images/Shaft_03760.png new file mode 100644 index 0000000000000000000000000000000000000000..c9765d9ead8234d8f1a5dd942f3e707e833a56a5 --- /dev/null +++ b/images/Shaft_03760.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bbc932b78893430a364c9d21a0006e8c00fd262479d2b8f516ea072795affa81 +size 98246 diff --git a/images/Shaft_03761.png b/images/Shaft_03761.png new file mode 100644 index 0000000000000000000000000000000000000000..8c778bb49d8cb2f65d01693118d457aaa86c20f8 --- /dev/null +++ b/images/Shaft_03761.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a4e0d264581b2a70c4e7bc8b0cae2ab4e68065e95fa991222142a3a42771052 +size 105975 diff --git a/images/Shaft_03762.png b/images/Shaft_03762.png new file mode 100644 index 0000000000000000000000000000000000000000..c6cd872f11309cefc96ba9e91db88607d4a77b70 --- /dev/null +++ b/images/Shaft_03762.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54f945bb8c03c301a1ca5202cc995608ac8a9837a754035428a468e3107907bd +size 83500 diff --git a/images/Shaft_03763.png b/images/Shaft_03763.png new file mode 100644 index 0000000000000000000000000000000000000000..40fbfcd876e95802861fc85060453df8d87f53f7 --- /dev/null +++ b/images/Shaft_03763.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:32e5fe41d8d6b19a32c12fd56bb26b72b92b0c5c1c2d9a951772033be1231b7d +size 84834 diff --git a/images/Shaft_03764.png b/images/Shaft_03764.png new file mode 100644 index 0000000000000000000000000000000000000000..2479439642e6388967fdeaa64aafb76f40f01da1 --- /dev/null +++ b/images/Shaft_03764.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e707c3dee4420e9e4ec7062f43ce72852e4b372a032860590eb45dc5bd84d51b +size 73891 diff --git a/images/Shaft_03765.png b/images/Shaft_03765.png new file mode 100644 index 0000000000000000000000000000000000000000..69d027d4fc2ca822ecd0c14db8a7acf031029536 --- /dev/null +++ b/images/Shaft_03765.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6defde10cca04fe58f939f0a02597e79a0e1b8c7d314fa0c0b3c7977670243b9 +size 114253 diff --git a/images/Shaft_03766.png b/images/Shaft_03766.png new file mode 100644 index 0000000000000000000000000000000000000000..9cc20c930cd28b477e980b8c504c7305c6e7cfe4 --- /dev/null +++ b/images/Shaft_03766.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2a9a8fac8a0927cca9781b77d797c4461f10b182301672012f4f750469c0a84 +size 96752 diff --git a/images/Shaft_03767.png b/images/Shaft_03767.png new file mode 100644 index 0000000000000000000000000000000000000000..48f72b6edcbbf7ad2fbe8ef9dcc615d2a6c9877c --- /dev/null +++ b/images/Shaft_03767.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:faac553396403727b63da8a568a615a74de18beb05ec9e7f9632ebc9c1570335 +size 81784 diff --git a/images/Shaft_03768.png b/images/Shaft_03768.png new file mode 100644 index 0000000000000000000000000000000000000000..c57b66c0e085d5e4a30018c0acab03b6a957f8db --- /dev/null +++ b/images/Shaft_03768.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5bb9993c71a90e7c2a1565f622aa40cc7b94521148c824de99ae9348bcdba814 +size 74766 diff --git a/images/Shaft_03769.png b/images/Shaft_03769.png new file mode 100644 index 0000000000000000000000000000000000000000..3acfcf1c1c335d2c9609a554a0be98d860fffe0a --- /dev/null +++ b/images/Shaft_03769.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:987b64838a939a73f3575b2e41e1f9bc19b31726608fe6ad3a393b55946532c8 +size 74020 diff --git a/images/Shaft_03770.png b/images/Shaft_03770.png new file mode 100644 index 0000000000000000000000000000000000000000..68b465a4d5f0ee85871caf05836b4fcf264f5e8b --- /dev/null +++ b/images/Shaft_03770.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5c3a9522f621d7f2975ae7e088dff1ad981056cf0b58318dae7677e7a43d0ad +size 95189 diff --git a/images/Shaft_03771.png b/images/Shaft_03771.png new file mode 100644 index 0000000000000000000000000000000000000000..3da6cee0b51f0fb52d8cfa38d45b3962671035d4 --- /dev/null +++ b/images/Shaft_03771.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73cfe3a7533d7b192c0f001a15f1f9dacc3c81a42b9886234a100bcec44e2031 +size 70965 diff --git a/images/Shaft_03772.png b/images/Shaft_03772.png new file mode 100644 index 0000000000000000000000000000000000000000..4cb5c4fe3bd80365acb6f0ecedf87662e44b0b48 --- /dev/null +++ b/images/Shaft_03772.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec819452fe89e8304b350c85fa90df940188e6d0fae53b2a82f5d87e9ca2cbc4 +size 72166 diff --git a/images/Shaft_03773.png b/images/Shaft_03773.png new file mode 100644 index 0000000000000000000000000000000000000000..f1c0e32575b72cdec64970650a49e661026e13d2 --- /dev/null +++ b/images/Shaft_03773.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:610fd603286071b4ac2f95d729cd7199aed6daadd6810687c40dae17b9f5c023 +size 79378 diff --git a/images/Shaft_03774.png b/images/Shaft_03774.png new file mode 100644 index 0000000000000000000000000000000000000000..4021df4e1fb1d01fcb412308c1ae57023d7b0c92 --- /dev/null +++ b/images/Shaft_03774.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcacbce878456c684e02ccc0bb1840e9a053f5a0e10b49ed7a1649e0ea4183cd +size 92366 diff --git a/images/Shaft_03775.png b/images/Shaft_03775.png new file mode 100644 index 0000000000000000000000000000000000000000..a98a1fcf764d636d829182d0ed1bf84025d1a5ad --- /dev/null +++ b/images/Shaft_03775.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36546cf3d1413b32683168129408e9f84eb4e6a60473e8e785962af99ef0ad9a +size 78356 diff --git a/images/Shaft_03776.png b/images/Shaft_03776.png new file mode 100644 index 0000000000000000000000000000000000000000..98cb9e7ff697a5e2e50a0558ddc56a8ef2a24170 --- /dev/null +++ b/images/Shaft_03776.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e4f4e83b591f44771f1af8a3ddd7fbf5baea0e6f3fc72d8fe4d936718e9f322 +size 71685 diff --git a/images/Shaft_03777.png b/images/Shaft_03777.png new file mode 100644 index 0000000000000000000000000000000000000000..4e16fc1740cd81096f83c0b4d121fc48de3ce5e7 --- /dev/null +++ b/images/Shaft_03777.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55ae4ff65670e2af89ae246b440a2ef7d1cc97dacba996f5101ecac15d11e304 +size 82868 diff --git a/images/Shaft_03778.png b/images/Shaft_03778.png new file mode 100644 index 0000000000000000000000000000000000000000..0982eeaec9fdc27cefbd8da078060d2acf73ad76 --- /dev/null +++ b/images/Shaft_03778.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f7693317a84063af2ac3cc360dfb7b7f8fb9219ab9338c564bb2f0621a1a867 +size 73230 diff --git a/images/Shaft_03779.png b/images/Shaft_03779.png new file mode 100644 index 0000000000000000000000000000000000000000..e96413d41ad1d7613e8016809e1021c8b797da67 --- /dev/null +++ b/images/Shaft_03779.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84c307e111404135197e0552841603d49cf401e8a0d3a9a32dc7455e4334db5c +size 116765 diff --git a/images/Shaft_03780.png b/images/Shaft_03780.png new file mode 100644 index 0000000000000000000000000000000000000000..3742a10c57e36a8076d9a20a122d7c2d009ccb44 --- /dev/null +++ b/images/Shaft_03780.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:903abeb1587be041ba900f0825902b17c7e287b83c3eefea7c0b08954188f69a +size 74422 diff --git a/images/Shaft_03781.png b/images/Shaft_03781.png new file mode 100644 index 0000000000000000000000000000000000000000..f103b100e848e1bd98668f17f74d01e3a4fb0df8 --- /dev/null +++ b/images/Shaft_03781.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8274bbb6c081a1d85c67f6784d399b75614cdc34f1bc8a2b8bfa54fd51aa3981 +size 72414 diff --git a/images/Shaft_03782.png b/images/Shaft_03782.png new file mode 100644 index 0000000000000000000000000000000000000000..adbf09ef7c2c5405cf9f444159f76b07e48193cc --- /dev/null +++ b/images/Shaft_03782.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93ea26286a715ec38da251f3fe789b665072735a4a8d6a08c6794aae9aa5cbd3 +size 69575 diff --git a/images/Shaft_03783.png b/images/Shaft_03783.png new file mode 100644 index 0000000000000000000000000000000000000000..78c976be694f935437d62199443de454980757e7 --- /dev/null +++ b/images/Shaft_03783.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6ea7c25ef7698ec8f299b0b5de513eb0ba9b01b638b417d6a6480145e81e2856 +size 76650 diff --git a/images/Shaft_03784.png b/images/Shaft_03784.png new file mode 100644 index 0000000000000000000000000000000000000000..1ccf81561116bd156ad026810f5fde7def91848e --- /dev/null +++ b/images/Shaft_03784.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f8f4ed288d0f99b2b1fed2aa14c1434aef754c23c48312002c86acf6b56e853 +size 75867 diff --git a/images/Shaft_03785.png b/images/Shaft_03785.png new file mode 100644 index 0000000000000000000000000000000000000000..42d6b280cac8bab5a3cf64e5041ad7a80776715d --- /dev/null +++ b/images/Shaft_03785.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18bf3f45fd3361b7dcfe0f8e112a13021fe920da6d0f6401d00e02aced324c7a +size 75359 diff --git a/images/Shaft_03786.png b/images/Shaft_03786.png new file mode 100644 index 0000000000000000000000000000000000000000..4e1501d045e9feb118cc56d0f41538175bc93b44 --- /dev/null +++ b/images/Shaft_03786.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61ca2178d23cbb11386b458d58e7af3b6cba68be14ce7e3948e9bb352d70111a +size 75054 diff --git a/images/Shaft_03787.png b/images/Shaft_03787.png new file mode 100644 index 0000000000000000000000000000000000000000..e117310c37704c0f8178fab759a50db97a4605c4 --- /dev/null +++ b/images/Shaft_03787.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd6a94f52ebc72357c4738438f37e24932745858203e90896ed4c929a88baf43 +size 89091 diff --git a/images/Shaft_03788.png b/images/Shaft_03788.png new file mode 100644 index 0000000000000000000000000000000000000000..9439fa46cc17eb46df8e55ad44b0a75ed5d05787 --- /dev/null +++ b/images/Shaft_03788.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:602aa309dff180916600bc096451551a8cb63b6c8975cf50a068f2e363eba976 +size 93160 diff --git a/images/Shaft_03789.png b/images/Shaft_03789.png new file mode 100644 index 0000000000000000000000000000000000000000..0c6f78a7594099815ef8ec4cc63f89dc82310879 --- /dev/null +++ b/images/Shaft_03789.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:80ded69fddac0310e10deddd967f9559c5add01ed99e91ae7a6444a2c3290995 +size 84031 diff --git a/images/Shaft_03790.png b/images/Shaft_03790.png new file mode 100644 index 0000000000000000000000000000000000000000..5537fdc0f19116953fa9effc73e944181f472b9d --- /dev/null +++ b/images/Shaft_03790.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4da4fd2889dc0b25d9138976a72518ee55928396006423523627063a1de9fb07 +size 77002 diff --git a/images/Shaft_03791.png b/images/Shaft_03791.png new file mode 100644 index 0000000000000000000000000000000000000000..38c50563276389e99658f3b2a6a377e1e80fc03f --- /dev/null +++ b/images/Shaft_03791.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db1e01f62e06342ccd0dff7e819a4467f7772ae7ed1619568619b3482fea45f5 +size 93465 diff --git a/images/Shaft_03792.png b/images/Shaft_03792.png new file mode 100644 index 0000000000000000000000000000000000000000..7517da00ec13258673d5df24419f7748bc8449e9 --- /dev/null +++ b/images/Shaft_03792.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b12dce6a0ae7b0328e8ec76f8b06841d62494327ba598cf0d7e7eae0d5738c33 +size 78003 diff --git a/images/Shaft_03793.png b/images/Shaft_03793.png new file mode 100644 index 0000000000000000000000000000000000000000..ff9bfc7ff331cc0e40c4014613cc1c19c5e99e62 --- /dev/null +++ b/images/Shaft_03793.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4424a0cc16d3743508046e6b35d04bebc5e9e5d82e56919fa8ec9476678778fd +size 79804 diff --git a/images/Shaft_03794.png b/images/Shaft_03794.png new file mode 100644 index 0000000000000000000000000000000000000000..c75ec9ec90e9574e67506aaaca70e81fe3a71c89 --- /dev/null +++ b/images/Shaft_03794.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ead6064d3b15f8c1700cd9ddef2010da81ad1e5d6d8a7ac3a5bab66a5dcf9acd +size 93722 diff --git a/images/Shaft_03795.png b/images/Shaft_03795.png new file mode 100644 index 0000000000000000000000000000000000000000..42381de7ef4eb4b455b703c678ff7746c71f0337 --- /dev/null +++ b/images/Shaft_03795.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f26b3649d843e177ad945fe7e83904a04c5761f608a8df6ce9d213e561d970a +size 74343 diff --git a/images/Shaft_03796.png b/images/Shaft_03796.png new file mode 100644 index 0000000000000000000000000000000000000000..15b63c5b3a4ccc205c06e9abff65675639b0e2b8 --- /dev/null +++ b/images/Shaft_03796.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17aef0b03e508d2d877b970db0fe1a29c49f0d5b0f927e9f510cb753ac4f4fd6 +size 88326 diff --git a/images/Shaft_03797.png b/images/Shaft_03797.png new file mode 100644 index 0000000000000000000000000000000000000000..09d06cef47fe43b7aa0e0c99fe4ee6646b9e1a84 --- /dev/null +++ b/images/Shaft_03797.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b85ee3af2f6894ab1682dfbc4ea16a7e85e69a73b62ec03a72bccdb219a7bde0 +size 75761 diff --git a/images/Shaft_03798.png b/images/Shaft_03798.png new file mode 100644 index 0000000000000000000000000000000000000000..68d4af24b259a0401ec417bae9aa2f3f7feb4ea3 --- /dev/null +++ b/images/Shaft_03798.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f24198869278f49a5111311443bbb0dc6ec11fbd48bc5e5fc9eddc5b6fb9e06 +size 90080 diff --git a/images/Shaft_03799.png b/images/Shaft_03799.png new file mode 100644 index 0000000000000000000000000000000000000000..ca7040050e9da96f3523ad60d2213cf20a4d61e9 --- /dev/null +++ b/images/Shaft_03799.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5489035f9d852eeb703b83554f2bfe7dc4c8bd5bcaf2c969dc80a1bee0e41c49 +size 85578 diff --git a/images/Shaft_03800.png b/images/Shaft_03800.png new file mode 100644 index 0000000000000000000000000000000000000000..9f7c16b44a9b878db1db8856c73d5fbd3ba8a5f8 --- /dev/null +++ b/images/Shaft_03800.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6a928b1beec959e527868ce0995f0730351c527e48a9db96231da322d2ea515 +size 75782 diff --git a/images/Shaft_03801.png b/images/Shaft_03801.png new file mode 100644 index 0000000000000000000000000000000000000000..ccd24ae0fa576340bb9a824c009db5ca98ffe4d8 --- /dev/null +++ b/images/Shaft_03801.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5abbfd75462aabc9da091fa56266d976c16f97643890c6cbc2615f97684ad8a +size 87974 diff --git a/images/Shaft_03802.png b/images/Shaft_03802.png new file mode 100644 index 0000000000000000000000000000000000000000..6dbef5bb6aba3bae53d0b9a38d8d849c28f037c9 --- /dev/null +++ b/images/Shaft_03802.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7e2e2879e25ecd03413694a734c72ceb93640c409f3aba49d49d2c02e3d1658 +size 87467 diff --git a/images/Shaft_03803.png b/images/Shaft_03803.png new file mode 100644 index 0000000000000000000000000000000000000000..c6ef6f0ad78e66c106476f1e7a9247413b447c47 --- /dev/null +++ b/images/Shaft_03803.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:261cec77101c7fb447acfbf11cde9b5ae8ba606ef106c7b16cc1cc33ef110d18 +size 100454 diff --git a/images/Shaft_03804.png b/images/Shaft_03804.png new file mode 100644 index 0000000000000000000000000000000000000000..9b8244cd4546ea840914ab377a333a1e0081f9f7 --- /dev/null +++ b/images/Shaft_03804.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a45438892ac92b3cf3ab3c8a2201d922a5f96dc68e921a37ad0f41c702869dd0 +size 72361 diff --git a/images/Shaft_03805.png b/images/Shaft_03805.png new file mode 100644 index 0000000000000000000000000000000000000000..59b7eaf66835c2f1c3f21e3c51b9962df79a8f1a --- /dev/null +++ b/images/Shaft_03805.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca7ebbee03aea0fc28c9ea93bd3ce6dc9e96caa3005781c99a85db354e4cb32e +size 86835 diff --git a/images/Shaft_03806.png b/images/Shaft_03806.png new file mode 100644 index 0000000000000000000000000000000000000000..f806947b17e9271c7b8776ae4ef05a12c7cce9cc --- /dev/null +++ b/images/Shaft_03806.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45f4fa83fa6e3cc782c7568a6e045056a21856f71e2528359e529f993c0b96d3 +size 71062 diff --git a/images/Shaft_03807.png b/images/Shaft_03807.png new file mode 100644 index 0000000000000000000000000000000000000000..88f10c26ab0a2929eca30735e4e24a7025b57e9d --- /dev/null +++ b/images/Shaft_03807.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0f3674b3ef3bfe852455c78d06eeb23806ba50c0d49b4771755463b1c77a6df +size 85498 diff --git a/images/Shaft_03808.png b/images/Shaft_03808.png new file mode 100644 index 0000000000000000000000000000000000000000..898fae31635893c84b6a85a6fe0d5f5465c1e872 --- /dev/null +++ b/images/Shaft_03808.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:341d5cf4840ca04ba7337b409af2e33ee8d0ac9f0c4e117f2569d7c60f648836 +size 81259 diff --git a/images/Shaft_03809.png b/images/Shaft_03809.png new file mode 100644 index 0000000000000000000000000000000000000000..c35cbdb3c21ec8dd52a4adb0a86629697d08735a --- /dev/null +++ b/images/Shaft_03809.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3f813652ebece2f26f4494b114189558646fd842580aaed2b301904fd5d516be +size 82618 diff --git a/images/Shaft_03810.png b/images/Shaft_03810.png new file mode 100644 index 0000000000000000000000000000000000000000..04890ddd7533de9650288e22b4d87a83091c1868 --- /dev/null +++ b/images/Shaft_03810.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c433a772a436c32e277b73c1f0624a9b25b441a9d9309863287194a8ae1eff2 +size 71494 diff --git a/images/Shaft_03811.png b/images/Shaft_03811.png new file mode 100644 index 0000000000000000000000000000000000000000..a7a648f0c611e777c2b38528b3bb14a77c2b94a4 --- /dev/null +++ b/images/Shaft_03811.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42bb7adadcf6df26b7873ffe19c3fc62d3f5691dff41c992af60943701e87966 +size 105355 diff --git a/images/Shaft_03812.png b/images/Shaft_03812.png new file mode 100644 index 0000000000000000000000000000000000000000..61f54e52cbd3bc1a01f4b6b57640c7ed8ab7a536 --- /dev/null +++ b/images/Shaft_03812.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a702f59d18cb5a594561d987714e09258bad1d4aa18802e64659e2381a18f38 +size 85624 diff --git a/images/Shaft_03813.png b/images/Shaft_03813.png new file mode 100644 index 0000000000000000000000000000000000000000..bd1421169af2161295cdd9e848c7b455b04cde8d --- /dev/null +++ b/images/Shaft_03813.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e947f111e62584170a0ec68f5d0c399b2f846c6cb1342947980865af928421c +size 81274 diff --git a/images/Shaft_03814.png b/images/Shaft_03814.png new file mode 100644 index 0000000000000000000000000000000000000000..9ffee7dc129bf280f76fb513c956bae3b3fa6e5a --- /dev/null +++ b/images/Shaft_03814.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7d0a6813ec815103af12c6f10a9a79b707382e8bf6c13e6fa290821839befbf +size 83013 diff --git a/images/Shaft_03815.png b/images/Shaft_03815.png new file mode 100644 index 0000000000000000000000000000000000000000..9148ae9918559de4a7ec7b06e0fc967f4b6e3148 --- /dev/null +++ b/images/Shaft_03815.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e61a6ff43b5095fbfd70c92cfe61ac8aa1485ba26385b2f97f5b480a316713d8 +size 91852 diff --git a/images/Shaft_03816.png b/images/Shaft_03816.png new file mode 100644 index 0000000000000000000000000000000000000000..2a7673d7cd8b393e266c2983925e9e5f9ecddcaa --- /dev/null +++ b/images/Shaft_03816.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c0ea7f9d96fe973d7c1a9703b949582b29566303bfac599c348abdab727f1f9 +size 95707 diff --git a/images/Shaft_03817.png b/images/Shaft_03817.png new file mode 100644 index 0000000000000000000000000000000000000000..c76bf9fbd9ced67bfd5bb5508e6d30e4aa9ed348 --- /dev/null +++ b/images/Shaft_03817.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76829438d7d022453656996e0a283102e9770b1e64af56cbbfc229e569246cc0 +size 82558 diff --git a/images/Shaft_03818.png b/images/Shaft_03818.png new file mode 100644 index 0000000000000000000000000000000000000000..4b8302e49613fe89a2cc7d95f9ed0156f0a8bf52 --- /dev/null +++ b/images/Shaft_03818.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:816b4d4511a880b2c4741bed6b82242504272b7bf9c7717bfbf4bd51cdb7fcf8 +size 77542 diff --git a/images/Shaft_03819.png b/images/Shaft_03819.png new file mode 100644 index 0000000000000000000000000000000000000000..fed28cf8d715812476c60985ae258c5aa692ae53 --- /dev/null +++ b/images/Shaft_03819.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:110cc9a0b0f28978bdc2596fd0177766189bdfc4fb24f5e93a2278124e9049d8 +size 84026 diff --git a/images/Shaft_03820.png b/images/Shaft_03820.png new file mode 100644 index 0000000000000000000000000000000000000000..a797c6cd8f3d311e0fac2019e2e1b52507a40d36 --- /dev/null +++ b/images/Shaft_03820.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:604f5e737bd2f3425239f33fb6fa1ae4681d816371dc364cc0629ec37c6bf498 +size 72519 diff --git a/images/Shaft_03821.png b/images/Shaft_03821.png new file mode 100644 index 0000000000000000000000000000000000000000..a75878a83aa4168f56671be829bc9eeca6b3abdd --- /dev/null +++ b/images/Shaft_03821.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baaa4b2a239cbf4e6dfd8754c3cdf7764609cd555824c3b5f6850d1b2e29810a +size 79106 diff --git a/images/Shaft_03822.png b/images/Shaft_03822.png new file mode 100644 index 0000000000000000000000000000000000000000..7855434aa83da3e42fd1b12dfc48682c476298eb --- /dev/null +++ b/images/Shaft_03822.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88af3c973ca9fd9a279b6a748b8e811d85c1ad4eedd1c1915a521278f1a864f0 +size 75782 diff --git a/images/Shaft_03823.png b/images/Shaft_03823.png new file mode 100644 index 0000000000000000000000000000000000000000..0fac4e4ca6369269d2e655ae240fabfee6ddd9da --- /dev/null +++ b/images/Shaft_03823.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:761b827196d9115999ad53b50a3ac1e274e0a8017cf0e2f2c9e7ad45075bb92f +size 90513 diff --git a/images/Shaft_03824.png b/images/Shaft_03824.png new file mode 100644 index 0000000000000000000000000000000000000000..75e0815f7baf84226a661eb1e45b2f864719f308 --- /dev/null +++ b/images/Shaft_03824.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a55ece9e55ed40e69a790f385847605756ff878fcc38df1001279feb63da5b0 +size 72964 diff --git a/images/Shaft_03825.png b/images/Shaft_03825.png new file mode 100644 index 0000000000000000000000000000000000000000..8e6282056538243970d077cb6ae8bddb1c46125a --- /dev/null +++ b/images/Shaft_03825.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86d4d57f3e27f75add221ef0c48b79a59f277f60dc268049bbf6209761dd44c3 +size 73388 diff --git a/images/Shaft_03826.png b/images/Shaft_03826.png new file mode 100644 index 0000000000000000000000000000000000000000..aac23357e38ea59571ec72d598233890d52237b5 --- /dev/null +++ b/images/Shaft_03826.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:896a3946f2481fea3a4cd6074603218c62beed0303cf40718aaba83254046656 +size 84483 diff --git a/images/Shaft_03827.png b/images/Shaft_03827.png new file mode 100644 index 0000000000000000000000000000000000000000..5b9c1063de0f91229ff27696d6cdfd02d57dd540 --- /dev/null +++ b/images/Shaft_03827.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f341b44de188eb41d296dd1c60eb5162272e82b2c3d20511ede606cefdc9670c +size 95145 diff --git a/images/Shaft_03828.png b/images/Shaft_03828.png new file mode 100644 index 0000000000000000000000000000000000000000..7749a0b3f040a4c0fa30f92adc59f93b5d365a22 --- /dev/null +++ b/images/Shaft_03828.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df993c3f059efa24ba4b3f3178e2382886bf077f23e057375f3f2880a77d4dd7 +size 90578 diff --git a/images/Shaft_03829.png b/images/Shaft_03829.png new file mode 100644 index 0000000000000000000000000000000000000000..8e1347bb2a878ae9781e9713d4fc2c8051a77924 --- /dev/null +++ b/images/Shaft_03829.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95469f39f208ad47de6960f7ecf9648d480112f7cb25275d28c260af8ca2ffcd +size 82630 diff --git a/images/Shaft_03830.png b/images/Shaft_03830.png new file mode 100644 index 0000000000000000000000000000000000000000..aaa2df00292def0f84586f7ada38db76aa3e6b86 --- /dev/null +++ b/images/Shaft_03830.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f5640de887ba7f3bdc40dfa5cce94af48e1007e8f20132b3e18704792b736fe +size 74036 diff --git a/images/Shaft_03831.png b/images/Shaft_03831.png new file mode 100644 index 0000000000000000000000000000000000000000..b746263b54db904430d0768d0036170483c04ae8 --- /dev/null +++ b/images/Shaft_03831.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6586814a3fc57a03f61d43223dff441c05ff09b5775c368fe235522f14aeb8ee +size 83707 diff --git a/images/Shaft_03832.png b/images/Shaft_03832.png new file mode 100644 index 0000000000000000000000000000000000000000..2fac484c9e976047e2fc6594f94c9c239a192fb3 --- /dev/null +++ b/images/Shaft_03832.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf93ef97fd0ccbbb809b0030281e7909312ac7cf1da338b758fe423c3e692ff1 +size 108002 diff --git a/images/Shaft_03833.png b/images/Shaft_03833.png new file mode 100644 index 0000000000000000000000000000000000000000..b68374bcf731a143c5ab8240bc4a6ec91c401b1e --- /dev/null +++ b/images/Shaft_03833.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b57de1bb13e4f5b7b785b0ae9dcd438f2c73e497292ed99cb8b1b676b4142275 +size 81466 diff --git a/images/Shaft_03834.png b/images/Shaft_03834.png new file mode 100644 index 0000000000000000000000000000000000000000..4af1814e389e3c4cabc6d8c9fdf64e9641d2ce98 --- /dev/null +++ b/images/Shaft_03834.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e0ad25504a5603c00edf19db1f1ff7befea9825ef203e43bfb150ec5fa531f3 +size 106522 diff --git a/images/Shaft_03835.png b/images/Shaft_03835.png new file mode 100644 index 0000000000000000000000000000000000000000..ac9985e96877a06779175d6500a56c57f0c354c2 --- /dev/null +++ b/images/Shaft_03835.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:710da466f631f740f4781fe221edca5b5a6523c6dea1ed3d13fde28a425fbc89 +size 83873 diff --git a/images/Shaft_03836.png b/images/Shaft_03836.png new file mode 100644 index 0000000000000000000000000000000000000000..ff7e1de1032bb87d9969531f03c0e3aa213c48bb --- /dev/null +++ b/images/Shaft_03836.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08617624f79668941acbe21abfbaf6f63a11674d37f18be75bb2f7c9fa1e4608 +size 90039 diff --git a/images/Shaft_03837.png b/images/Shaft_03837.png new file mode 100644 index 0000000000000000000000000000000000000000..ff5300175ce9bed15514bf83a99ce475625924d4 --- /dev/null +++ b/images/Shaft_03837.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d66ec42c811ae9677a9022d78567924732d80438e4593838663994d323937572 +size 98533 diff --git a/images/Shaft_03838.png b/images/Shaft_03838.png new file mode 100644 index 0000000000000000000000000000000000000000..4ba9e374f42a3f3017e7755436f6870367f9dd12 --- /dev/null +++ b/images/Shaft_03838.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4235f632cf5d1374ffd105c0caacb15d9d3f66c4c6a60d81f8084e040f3339a5 +size 86564 diff --git a/images/Shaft_03839.png b/images/Shaft_03839.png new file mode 100644 index 0000000000000000000000000000000000000000..80dc34c3d9ff57766665b70ccf84dc218f943ce4 --- /dev/null +++ b/images/Shaft_03839.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ff93387736206918a13c120768f7041ace12aeb6f602531ac2000faddce761c +size 94396 diff --git a/images/Shaft_03840.png b/images/Shaft_03840.png new file mode 100644 index 0000000000000000000000000000000000000000..22a17a97a8b178f124b0566623fc82b25dc42938 --- /dev/null +++ b/images/Shaft_03840.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12baba17e5f4ccfc664908ee581429b9c5bec8bbb6bb2787a10b1ed54aad9729 +size 91440 diff --git a/images/Shaft_03841.png b/images/Shaft_03841.png new file mode 100644 index 0000000000000000000000000000000000000000..95bd15331b96dc79eb9e780092a258fb53ede499 --- /dev/null +++ b/images/Shaft_03841.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96d005525f128e522db9925132980042e43c5a8d10013880008d244a33c4b4f7 +size 78432 diff --git a/images/Shaft_03842.png b/images/Shaft_03842.png new file mode 100644 index 0000000000000000000000000000000000000000..0098a56f93349adfd461d38ed65172260dbcd609 --- /dev/null +++ b/images/Shaft_03842.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b0614fce2951bad4eae893027eb5a9db80479d834cb2f7d328ee982abc5e730 +size 104962 diff --git a/images/Shaft_03843.png b/images/Shaft_03843.png new file mode 100644 index 0000000000000000000000000000000000000000..07874ff216fb06480650142240547b8798740a6b --- /dev/null +++ b/images/Shaft_03843.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5be7f5530f9e416276bee2dfc1adf32e8b55fb3977fca6aef217520995873ef +size 102418 diff --git a/images/Shaft_03844.png b/images/Shaft_03844.png new file mode 100644 index 0000000000000000000000000000000000000000..503400ed3c8bf2dd5b36c0d24b2e1011213a2c2c --- /dev/null +++ b/images/Shaft_03844.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:182fe4bf80ebca2f8a7a1fa2b90367c660dba0970d6eba42d40a143f2af3ea10 +size 93571 diff --git a/images/Shaft_03845.png b/images/Shaft_03845.png new file mode 100644 index 0000000000000000000000000000000000000000..199681ca9709f99ed548ce50b78b9b58df39cc32 --- /dev/null +++ b/images/Shaft_03845.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ac9380c1ab2ad6a6c29d46b7168b5347ab223363a07b474b6af7d649ae993d6 +size 73559 diff --git a/images/Shaft_03846.png b/images/Shaft_03846.png new file mode 100644 index 0000000000000000000000000000000000000000..a232844146c6fe1c8212f56de0126cf3d66d78e7 --- /dev/null +++ b/images/Shaft_03846.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a02c8c0a9a454282f8080740cd3b21d1e1babf0f7614f753b46b2457aa41405 +size 91280 diff --git a/images/Shaft_03847.png b/images/Shaft_03847.png new file mode 100644 index 0000000000000000000000000000000000000000..4963906b8dfe264d05416f6c606e38e76b0f8895 --- /dev/null +++ b/images/Shaft_03847.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d27147faeffde4eeaa4b437d6afdbaaebe99df5609f9e4afde5ce4c2674397f +size 78876 diff --git a/images/Shaft_03848.png b/images/Shaft_03848.png new file mode 100644 index 0000000000000000000000000000000000000000..6a917303ffc018d804e95c2980ea4216184a731f --- /dev/null +++ b/images/Shaft_03848.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72d7f87879db6f7d6e77f10ef2d33c5bbeed50e5b0286a9cf0e550353731f95a +size 83431 diff --git a/images/Shaft_03849.png b/images/Shaft_03849.png new file mode 100644 index 0000000000000000000000000000000000000000..297fcad2d988809b6877a5fe52b69dde59800532 --- /dev/null +++ b/images/Shaft_03849.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4717eb14021484cffad70d4fb4c740ad3eaebad914996b2bd5069299103ed56 +size 98153 diff --git a/images/Shaft_03850.png b/images/Shaft_03850.png new file mode 100644 index 0000000000000000000000000000000000000000..e1f8887bdd05091e9a267d4f38e58fe30318602c --- /dev/null +++ b/images/Shaft_03850.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ebaa2620a1d8d415bcf0ea9d138ea46cb19646af8819f6a8ea53cd0cbc79570 +size 82737 diff --git a/images/Shaft_03851.png b/images/Shaft_03851.png new file mode 100644 index 0000000000000000000000000000000000000000..7c4dc1a4fd25ede32273dea47ec507564455ea09 --- /dev/null +++ b/images/Shaft_03851.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09c2bf27932b6a6bc9b601e1b3896f94c1b254250d75afcb4577def8042e8ca2 +size 74960 diff --git a/images/Shaft_03852.png b/images/Shaft_03852.png new file mode 100644 index 0000000000000000000000000000000000000000..37d5ccd819041a05c2768d9b844d51759f6c4c66 --- /dev/null +++ b/images/Shaft_03852.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1781f40da87c6cba9d4ac4e95833b1789d6c664b221d29521eb0585b78270d0 +size 86328 diff --git a/images/Shaft_03853.png b/images/Shaft_03853.png new file mode 100644 index 0000000000000000000000000000000000000000..2b6dadfeeb71cf4f640f90086e6cfa0d77e95e7d --- /dev/null +++ b/images/Shaft_03853.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e55cd558999950c6092433b98d19efd663109c3107025f7e67c56e7735f1836 +size 99114 diff --git a/images/Shaft_03854.png b/images/Shaft_03854.png new file mode 100644 index 0000000000000000000000000000000000000000..6f149e09d6f2401b890248834ff3b2741e8551ae --- /dev/null +++ b/images/Shaft_03854.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:24aff50af099d8050f24fd9e80196bccf754d9016be27fa8a31d03107abfcc41 +size 92954 diff --git a/images/Shaft_03855.png b/images/Shaft_03855.png new file mode 100644 index 0000000000000000000000000000000000000000..9c3c1f163f1c3efe674e5ae96bc25653b9c19fb3 --- /dev/null +++ b/images/Shaft_03855.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c22b13039914a563064761affe87b3927ccd51ad961ebed8cb05e3857f940657 +size 75436 diff --git a/images/Shaft_03856.png b/images/Shaft_03856.png new file mode 100644 index 0000000000000000000000000000000000000000..00671ab8b6b6f463f16708d7fef3ed59b0bda37e --- /dev/null +++ b/images/Shaft_03856.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c229cb67d86ff56666bef8382a17431badd87b4e759767c137d6ce3bc51dfd9 +size 88080 diff --git a/images/Shaft_03857.png b/images/Shaft_03857.png new file mode 100644 index 0000000000000000000000000000000000000000..e646bd317239e0e310691127a1211e04b4337947 --- /dev/null +++ b/images/Shaft_03857.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e275d592918ee74caf7ef60e23e10ef2c1d0ba5e625ce0c4fd691f2eda589e9e +size 93863 diff --git a/images/Shaft_03858.png b/images/Shaft_03858.png new file mode 100644 index 0000000000000000000000000000000000000000..3e50073c39f1844bf0a4de047f0b6638af710146 --- /dev/null +++ b/images/Shaft_03858.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:467d403069bf1815a342fb4abd5ba59718126670daa0d986d150681f3f5f94fa +size 70893 diff --git a/images/Shaft_03859.png b/images/Shaft_03859.png new file mode 100644 index 0000000000000000000000000000000000000000..36554dde827010f86702a6e2221f980db6101813 --- /dev/null +++ b/images/Shaft_03859.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eef7f6596a926e356b4f9dfc2582ae26e1d68f84c5157f7a841573d49f7ddacb +size 114047 diff --git a/images/Shaft_03860.png b/images/Shaft_03860.png new file mode 100644 index 0000000000000000000000000000000000000000..5acb95ec1251703a98de45ca0d44e8db7eb42daa --- /dev/null +++ b/images/Shaft_03860.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2ccd701bd13a6c438633ad415c8c2a740e1112e834bd01e925ce03d8d452605 +size 85213 diff --git a/images/Shaft_03861.png b/images/Shaft_03861.png new file mode 100644 index 0000000000000000000000000000000000000000..eed6135029da266adf2c5ea998574e731b669078 --- /dev/null +++ b/images/Shaft_03861.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc731220aed811d125c5c7070ce3f43eca0a3957aff9ab45ea1d0c4b695bc976 +size 86757 diff --git a/images/Shaft_03862.png b/images/Shaft_03862.png new file mode 100644 index 0000000000000000000000000000000000000000..8d6c4df037901f7786d02ad7fc96eea23793cc0a --- /dev/null +++ b/images/Shaft_03862.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a4ad1099efca31f754ba4c2d2ad3195286dd120938a2bb036f9563f483db656 +size 76118 diff --git a/images/Shaft_03863.png b/images/Shaft_03863.png new file mode 100644 index 0000000000000000000000000000000000000000..b40dc28d826d2bcbef29ae75b2dcf4e5ef5b8629 --- /dev/null +++ b/images/Shaft_03863.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e041dfd8ba7219bc036726f96479a50b8f005f545a2cb6338b949eb070256d27 +size 85293 diff --git a/images/Shaft_03864.png b/images/Shaft_03864.png new file mode 100644 index 0000000000000000000000000000000000000000..835e12dbf85ec5e1f80df196ffb6445e0cd14ab2 --- /dev/null +++ b/images/Shaft_03864.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c219f20ddbb84fb97ed4a7c9fe9eadf785a0b9a3c060ef7ec78ee88fc0760246 +size 92702 diff --git a/images/Shaft_03865.png b/images/Shaft_03865.png new file mode 100644 index 0000000000000000000000000000000000000000..a6812755ac3ed235706eee6a774018fb33b6fc85 --- /dev/null +++ b/images/Shaft_03865.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6019c7a0b67188ebd9bbaedaaea3a6d2f972a75ddc12b827e054ea13ce3024f5 +size 70724 diff --git a/images/Shaft_03866.png b/images/Shaft_03866.png new file mode 100644 index 0000000000000000000000000000000000000000..8225a0ece10cf5c06d0fa5a9b2051d320a05c38b --- /dev/null +++ b/images/Shaft_03866.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12319ce56448bcac2673acf45b25e76716fba7a6e64eba6de3f36e1f11769fc7 +size 89205 diff --git a/images/Shaft_03867.png b/images/Shaft_03867.png new file mode 100644 index 0000000000000000000000000000000000000000..46f8434fcd6c0b35fa036d98ba35e2f08fb93ce1 --- /dev/null +++ b/images/Shaft_03867.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c40a7429fafc892e27da9aac73f86bfa1fa70405b22705f8ecf2118c76f5c9cd +size 77767 diff --git a/images/Shaft_03868.png b/images/Shaft_03868.png new file mode 100644 index 0000000000000000000000000000000000000000..4e4b1dd46b61029400d168939d7efdfc34d084a9 --- /dev/null +++ b/images/Shaft_03868.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f656d642e46207536e925a70a0d725a2abfed13112a9fa52c67fc27bca549e3c +size 76953 diff --git a/images/Shaft_03869.png b/images/Shaft_03869.png new file mode 100644 index 0000000000000000000000000000000000000000..6abec114d0701d542b1b6f0c6b5a591bbc114b47 --- /dev/null +++ b/images/Shaft_03869.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:13ae2e609396b4afb8fb65cdb6ccffeb998602f0eea9e700204ad12c60f6cb64 +size 91701 diff --git a/images/Shaft_03870.png b/images/Shaft_03870.png new file mode 100644 index 0000000000000000000000000000000000000000..8200ee440ac9e7cbb66e2cfb38f5192909277079 --- /dev/null +++ b/images/Shaft_03870.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d530efa0a2f8109f18ac8e228e8a69865135f895f544cf8f131d33efa22bc63 +size 92944 diff --git a/images/Shaft_03871.png b/images/Shaft_03871.png new file mode 100644 index 0000000000000000000000000000000000000000..fdb0654ed17cc07458566a59ca0ed93d0cb5bc47 --- /dev/null +++ b/images/Shaft_03871.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07db3bab2e93d8fae659ac9ffcb5b1253e390d60d1eef6aa17884c601e6a1eeb +size 69068 diff --git a/images/Shaft_03872.png b/images/Shaft_03872.png new file mode 100644 index 0000000000000000000000000000000000000000..1f6d2e0176fa89b6622e26a18c712d2c857b3c68 --- /dev/null +++ b/images/Shaft_03872.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c7e9b244fe30b05d4669d8d4eaba2a1026c7f0fe3e040ff7554bdddf5769e72 +size 84305 diff --git a/images/Shaft_03873.png b/images/Shaft_03873.png new file mode 100644 index 0000000000000000000000000000000000000000..61babccb0ff8266370cc6b2f3042c2a9d788e08f --- /dev/null +++ b/images/Shaft_03873.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f9cd5ae48f21da84e324b972b32ef10f71f1f626218377ea1956ae3cd9f246f +size 111996 diff --git a/images/Shaft_03874.png b/images/Shaft_03874.png new file mode 100644 index 0000000000000000000000000000000000000000..3855061783218ea8b892e22691fbf07ccff37ce6 --- /dev/null +++ b/images/Shaft_03874.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:097cd95e2d2012eae612eebf127a0535253b6cc6923b55ff215f5580f1333b83 +size 113221 diff --git a/images/Shaft_03875.png b/images/Shaft_03875.png new file mode 100644 index 0000000000000000000000000000000000000000..e643057e5dcf93363f012c6536dc3f859237f305 --- /dev/null +++ b/images/Shaft_03875.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff437cff65f357ea34f719cf69896a7fddf9dc4e09f459db1d4460b7ba885376 +size 99706 diff --git a/images/Shaft_03876.png b/images/Shaft_03876.png new file mode 100644 index 0000000000000000000000000000000000000000..fc82946701372c5d21e8fd7bac37831c423acca4 --- /dev/null +++ b/images/Shaft_03876.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:536d6be93260fcd4cc03ff8a7b20c2b75717127e6dd4c432cd8d61de63fe9def +size 97523 diff --git a/images/Shaft_03877.png b/images/Shaft_03877.png new file mode 100644 index 0000000000000000000000000000000000000000..8f1948739e5981872af08e9ec3c891c4a6201480 --- /dev/null +++ b/images/Shaft_03877.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b67f5dc13a02ce418be99fdb4873b909640085d3ee12e3c8c9f8f145f7bdea53 +size 71584 diff --git a/images/Shaft_03878.png b/images/Shaft_03878.png new file mode 100644 index 0000000000000000000000000000000000000000..b73355a09d3593754ff5b6e6fe84a7979f02a750 --- /dev/null +++ b/images/Shaft_03878.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45f6adbb50c4cd07334c487a2890e1dfad64541711c7870be53a5f9b547970b1 +size 74390 diff --git a/images/Shaft_03879.png b/images/Shaft_03879.png new file mode 100644 index 0000000000000000000000000000000000000000..c0e31691cf1f1041729856248d2dd16dd0130294 --- /dev/null +++ b/images/Shaft_03879.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:abe6bb717b0073f594a453f16ce8adeb9150da51a59f14c979314c63ddb6d366 +size 102360 diff --git a/images/Shaft_03880.png b/images/Shaft_03880.png new file mode 100644 index 0000000000000000000000000000000000000000..d62d5547867debaa46bbd19093a1b04230714e12 --- /dev/null +++ b/images/Shaft_03880.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1dc8405c41041767a8518deb2f4b2099cb0c2dbc9f276d7e9a6f5f4bf2d32fe3 +size 85759 diff --git a/images/Shaft_03881.png b/images/Shaft_03881.png new file mode 100644 index 0000000000000000000000000000000000000000..ea3fb81bf2ff24d419debbed01e1a9fde5b5b7fd --- /dev/null +++ b/images/Shaft_03881.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:786555ded74d82dbaa77971063886f6c6d87caaa2188acb72442f71b2959d773 +size 104154 diff --git a/images/Shaft_03882.png b/images/Shaft_03882.png new file mode 100644 index 0000000000000000000000000000000000000000..961e06492456a9790174782e21a58444ca5d4f8b --- /dev/null +++ b/images/Shaft_03882.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ae255845903af039caa1bb584bd7e66b8b6fbc132a56264a28666a84632d860 +size 93175 diff --git a/images/Shaft_03883.png b/images/Shaft_03883.png new file mode 100644 index 0000000000000000000000000000000000000000..4e8c41773c2318f17a5b46140ecec4153e7580c2 --- /dev/null +++ b/images/Shaft_03883.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:495db7c5b10825e6d2c0d51c5ad39845a47ea3e034f4e25dd14e2aaa3d85ab40 +size 75360 diff --git a/images/Shaft_03884.png b/images/Shaft_03884.png new file mode 100644 index 0000000000000000000000000000000000000000..299d7b0f8a354f559667a6a486b80bd248fb47c6 --- /dev/null +++ b/images/Shaft_03884.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d996a3b8f9877e23743449543adaf127a80142001d9d97c05986032fbca2143 +size 81220 diff --git a/images/Shaft_03885.png b/images/Shaft_03885.png new file mode 100644 index 0000000000000000000000000000000000000000..0b3e5a223ec443be1421a95be592b76fb4a6f954 --- /dev/null +++ b/images/Shaft_03885.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91c98f26fb952e1426aec00275c512c1db8e879bb15310695bd338c5b1eaac46 +size 101813 diff --git a/images/Shaft_03886.png b/images/Shaft_03886.png new file mode 100644 index 0000000000000000000000000000000000000000..26515c0a974d81cf3715009612c7e7fd9b3bdb06 --- /dev/null +++ b/images/Shaft_03886.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83b64c52fd07d2f2cd867a1fd3cb6fd7de69fa949ca90e0a36021f7d2baf10ba +size 83683 diff --git a/images/Shaft_03887.png b/images/Shaft_03887.png new file mode 100644 index 0000000000000000000000000000000000000000..1c5ef5fa6aa70a131133601a3678bd4184c8dc4f --- /dev/null +++ b/images/Shaft_03887.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47d976af85122b0ef8261d0101fc042fb73c107d5a0876187a7f13f067220104 +size 81729 diff --git a/images/Shaft_03888.png b/images/Shaft_03888.png new file mode 100644 index 0000000000000000000000000000000000000000..e36b15dd279ec89e2e99db151df1dd0b48fc30fd --- /dev/null +++ b/images/Shaft_03888.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c9d2af6e179f05e89879751492968bd06b98871aa8c18140ba25955c36a98ef +size 97736 diff --git a/images/Shaft_03889.png b/images/Shaft_03889.png new file mode 100644 index 0000000000000000000000000000000000000000..c0b8a2ad56eda9df2f1c282d106c0473642aa6ae --- /dev/null +++ b/images/Shaft_03889.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b9d6ec45787d1e3ae9868e024f16aae0ea4194679a97dca01ba87fb2c0bfc0e +size 112220 diff --git a/images/Shaft_03890.png b/images/Shaft_03890.png new file mode 100644 index 0000000000000000000000000000000000000000..9ce26ab9ff0fb714b0912723dfc2fb551c246a46 --- /dev/null +++ b/images/Shaft_03890.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71abc5ab67020432881588caadf77b6fe5b38fb43a0f79a1ec1d24e7767ae3c9 +size 82012 diff --git a/images/Shaft_03891.png b/images/Shaft_03891.png new file mode 100644 index 0000000000000000000000000000000000000000..183fbb6a76f354b741f08d0c272d8cbf51fe15d8 --- /dev/null +++ b/images/Shaft_03891.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70998d07878082045c38489e2d42e74a4c97e9c693634896a0d02c36e6b64687 +size 69616 diff --git a/images/Shaft_03892.png b/images/Shaft_03892.png new file mode 100644 index 0000000000000000000000000000000000000000..673a839397ca739fe38d24e221943b99e53026d8 --- /dev/null +++ b/images/Shaft_03892.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06e3847f4d7b1f31afacd5d657d2292d113a06000b5728c264dd1d4bfdb06f77 +size 94255 diff --git a/images/Shaft_03893.png b/images/Shaft_03893.png new file mode 100644 index 0000000000000000000000000000000000000000..ff2fd469566ad7ad427e2d93a57a379f604d8cea --- /dev/null +++ b/images/Shaft_03893.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb482399d306a226405eef557f0bae7c67e0cf5d693d1b10ef55389904de0f2d +size 71211 diff --git a/images/Shaft_03894.png b/images/Shaft_03894.png new file mode 100644 index 0000000000000000000000000000000000000000..b3f52618c35505a5dd3cdef0819c6881a5edb763 --- /dev/null +++ b/images/Shaft_03894.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:912fdb370e397bd2f37bd0ab4bdce0f76219b0496147a316d467db87a17960a3 +size 108217 diff --git a/images/Shaft_03895.png b/images/Shaft_03895.png new file mode 100644 index 0000000000000000000000000000000000000000..0b1328965b4d79a4c2ae11bfcdcf296c5502cb2c --- /dev/null +++ b/images/Shaft_03895.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e41f00b581114b176efb66ee53229a20f5880c6f80bc104119ec65ef97acb78a +size 82488 diff --git a/images/Shaft_03896.png b/images/Shaft_03896.png new file mode 100644 index 0000000000000000000000000000000000000000..511eeb8ad98f08a02c99895b307737af203cfe1c --- /dev/null +++ b/images/Shaft_03896.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83d8b810ccd94076542090dfe43aa24442354d3ad59f745c1fc0dce94863a581 +size 91402 diff --git a/images/Shaft_03897.png b/images/Shaft_03897.png new file mode 100644 index 0000000000000000000000000000000000000000..89729ce7ae9d25ef438aade900dd71da4c24e21d --- /dev/null +++ b/images/Shaft_03897.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31cde149aa7420103094d5fd6780b50ddbef2bb1a5d6a6bfa931ffbc9f9b7767 +size 82494 diff --git a/images/Shaft_03898.png b/images/Shaft_03898.png new file mode 100644 index 0000000000000000000000000000000000000000..787b3a31fa5a92449e3cd12729c0a5b8d2993929 --- /dev/null +++ b/images/Shaft_03898.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a75123a125104b1bb1b9153e315a0a2c94d4d5d953c3b9dba1acc7c917eb1c48 +size 91847 diff --git a/images/Shaft_03899.png b/images/Shaft_03899.png new file mode 100644 index 0000000000000000000000000000000000000000..356a8142fb209ca268c078cfb79305f9b6feec8a --- /dev/null +++ b/images/Shaft_03899.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d1085fe97981c701f4860172aa93ddfe7063fb4811c3032831cc20160288070 +size 91127 diff --git a/images/Shaft_03900.png b/images/Shaft_03900.png new file mode 100644 index 0000000000000000000000000000000000000000..720cdae0d51b9aa59d59b8ac92299de77ab2fcd3 --- /dev/null +++ b/images/Shaft_03900.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb3cb72389e2ed8830ca846bc9b50f6bfd156c8b5ae04139e01188d1c90a274f +size 114323 diff --git a/images/Shaft_03901.png b/images/Shaft_03901.png new file mode 100644 index 0000000000000000000000000000000000000000..4bd59e277182d2b6b1dc83817a50e125514ee5d3 --- /dev/null +++ b/images/Shaft_03901.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8abd1ccbaf6bf3fda5f74ec752d6028f542eca08324688f8a204d2af57176005 +size 87562 diff --git a/images/Shaft_03902.png b/images/Shaft_03902.png new file mode 100644 index 0000000000000000000000000000000000000000..131f68871264affb014210d078cf7c053a4f98f7 --- /dev/null +++ b/images/Shaft_03902.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41d9eb36af377f82f3b1d832179633f73338a469a5d290d12fe92418a3f56ac8 +size 69002 diff --git a/images/Shaft_03903.png b/images/Shaft_03903.png new file mode 100644 index 0000000000000000000000000000000000000000..7b97a1585582f3a0ab0988ba7e7b2183c8b3440d --- /dev/null +++ b/images/Shaft_03903.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74212b4df6bbb67077af46fbaa01692525f90c5b102297de442958cfd30acf30 +size 90174 diff --git a/images/Shaft_03904.png b/images/Shaft_03904.png new file mode 100644 index 0000000000000000000000000000000000000000..5a8b2c023d1262704a5db8718aa3f0537ef84063 --- /dev/null +++ b/images/Shaft_03904.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec14fa7e099a3a58ed6fd1eddb9409f7ddd698afc6819366a2cc90c09dd0b43f +size 71711 diff --git a/images/Shaft_03905.png b/images/Shaft_03905.png new file mode 100644 index 0000000000000000000000000000000000000000..4c2d116c8854ecfbd9068a0ea1601575ecac5ae2 --- /dev/null +++ b/images/Shaft_03905.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f3869aa42f1386591bb5c619d0f7af8488ad0201f89e2d8d9f98de7dd57cb9c4 +size 86671 diff --git a/images/Shaft_03906.png b/images/Shaft_03906.png new file mode 100644 index 0000000000000000000000000000000000000000..a4bae006f1dc7b09f677626e9e6250d4265ceb0e --- /dev/null +++ b/images/Shaft_03906.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:96fef388ded41cbd15506b0ad188ab2c7a917fd5eb0015697d512070e61d1049 +size 87179 diff --git a/images/Shaft_03907.png b/images/Shaft_03907.png new file mode 100644 index 0000000000000000000000000000000000000000..c190e2a0dad59584316763bfe0c00a6a407665eb --- /dev/null +++ b/images/Shaft_03907.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4793ffb45cb4e718db8e2a60122fd49ad8726203610ad0e2bdaecdfb32efe194 +size 71090 diff --git a/images/Shaft_03908.png b/images/Shaft_03908.png new file mode 100644 index 0000000000000000000000000000000000000000..09471bf0d8df64c94f9e437c4e56149a1391c0e0 --- /dev/null +++ b/images/Shaft_03908.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:703f76bbb94fae9e10f94c8ff3d1ff1e9515bc5230b2e0b841b3ad3279af6ae9 +size 85396 diff --git a/images/Shaft_03909.png b/images/Shaft_03909.png new file mode 100644 index 0000000000000000000000000000000000000000..aaf1dc26732dc02aedcef8a7f3d15209870dffca --- /dev/null +++ b/images/Shaft_03909.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bd8e3c309484af3f3eafde2c8f454fbd20f9a7179027f3306071b34c1ac8096 +size 72306 diff --git a/images/Shaft_03910.png b/images/Shaft_03910.png new file mode 100644 index 0000000000000000000000000000000000000000..9b0e13fe2f5af98ffcbf8e3c965546f149bf613e --- /dev/null +++ b/images/Shaft_03910.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e2f9ba81ff79ae8c63e8fc6abdc122a22b34effbe0942ee20232da5225a8b0e +size 87629 diff --git a/images/Shaft_03911.png b/images/Shaft_03911.png new file mode 100644 index 0000000000000000000000000000000000000000..5ec361753cffcabffcd6a1a5cf97936c120591e1 --- /dev/null +++ b/images/Shaft_03911.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d0e0949059bc35ffcbec58b3671ae504da02d225300d8fc74f177d2efcc3830 +size 103025 diff --git a/images/Shaft_03912.png b/images/Shaft_03912.png new file mode 100644 index 0000000000000000000000000000000000000000..d893b988c98d0efb0bc5c6c142660d739a1a71ba --- /dev/null +++ b/images/Shaft_03912.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe9fe3cf870734684e80a3f12e2e669a0ddd9050d9c08f39b228dd5b5c3a73e2 +size 69940 diff --git a/images/Shaft_03913.png b/images/Shaft_03913.png new file mode 100644 index 0000000000000000000000000000000000000000..b3babc30a6afc7564e9ce7ab5cfe3a9e917ba82c --- /dev/null +++ b/images/Shaft_03913.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0520b525f68c7263636727e43f814ee886c4357cf5bbbcde1d4084eae9a4ce1 +size 97213 diff --git a/images/Shaft_03914.png b/images/Shaft_03914.png new file mode 100644 index 0000000000000000000000000000000000000000..dd243c28d082eb73b6be0a1c8b36909ebcb15e1c --- /dev/null +++ b/images/Shaft_03914.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:56d1929699a1f6a34a1a0902d059215ec06bf646c600f187fe0c681e01e7adad +size 72944 diff --git a/images/Shaft_03915.png b/images/Shaft_03915.png new file mode 100644 index 0000000000000000000000000000000000000000..339035e946d4ff1f296b01cb65e02f63f3622ecf --- /dev/null +++ b/images/Shaft_03915.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0043f4b3f251825bc7d820e43c9cd23d31ce05824ea3710e7f65fca4f15aed1d +size 92546 diff --git a/images/Shaft_03916.png b/images/Shaft_03916.png new file mode 100644 index 0000000000000000000000000000000000000000..28feb6191eeccaf12bf91f355ae5abbf9d80acfc --- /dev/null +++ b/images/Shaft_03916.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6abbfde127f706aebc5f8edc6c29182f908e1eb6cf91c78234efc26ac772275e +size 105587 diff --git a/images/Shaft_03917.png b/images/Shaft_03917.png new file mode 100644 index 0000000000000000000000000000000000000000..25931b11d331dc3b9c43aebca3cc2c309362fbeb --- /dev/null +++ b/images/Shaft_03917.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1e9c1a9c96260555a92b0d7ecada51488d742eeb4ec82af6aa5b24a4ca43fab +size 71039 diff --git a/images/Shaft_03918.png b/images/Shaft_03918.png new file mode 100644 index 0000000000000000000000000000000000000000..e68922dab7326cfa139b3726f959bfcd725d376b --- /dev/null +++ b/images/Shaft_03918.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1cac3110775ce39fa4af33729ea367bffaf792b4f182bfd870b368a53bc36e7 +size 88438 diff --git a/images/Shaft_03919.png b/images/Shaft_03919.png new file mode 100644 index 0000000000000000000000000000000000000000..fdfca7af9173cf6f69a3abb0d30e96fb93fa048f --- /dev/null +++ b/images/Shaft_03919.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53d590c0232015bf2ddee84b3772b0fdef3598c7913999ee309450471ff495dd +size 92585 diff --git a/images/Shaft_03920.png b/images/Shaft_03920.png new file mode 100644 index 0000000000000000000000000000000000000000..64825e2526a78027641581b408581b857e788966 --- /dev/null +++ b/images/Shaft_03920.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ce76fa6d1b04f012286ca9bee84c81255da13ce5cdd176cc7436993cec30a0bb +size 72337 diff --git a/images/Shaft_03921.png b/images/Shaft_03921.png new file mode 100644 index 0000000000000000000000000000000000000000..b64b183245a9bec64586496c236d3936db363748 --- /dev/null +++ b/images/Shaft_03921.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d717db45c24521f6ccd0dd754ac687d3ada2252d1df82fc0b5eed02f966b3af5 +size 84299 diff --git a/images/Shaft_03922.png b/images/Shaft_03922.png new file mode 100644 index 0000000000000000000000000000000000000000..a879eb8d1da0cff9b7716c97a96e1d00c84ac196 --- /dev/null +++ b/images/Shaft_03922.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4e77777b066e31a05f25614ce2bfd301ba6e6dee5ef05a5fb90e719a015a349a +size 111295 diff --git a/images/Shaft_03923.png b/images/Shaft_03923.png new file mode 100644 index 0000000000000000000000000000000000000000..6bc5298f23c86e5120a00c576a447b8437393d6c --- /dev/null +++ b/images/Shaft_03923.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47a088f80198824ab559485fed1e0d85e2804fd77e0e80e0f16f670658486767 +size 81797 diff --git a/images/Shaft_03924.png b/images/Shaft_03924.png new file mode 100644 index 0000000000000000000000000000000000000000..ee48389f3c1d52020a89e7312ec807ef96294a6a --- /dev/null +++ b/images/Shaft_03924.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7490fee58dd131864c292e4e5ef05b5cc3d63bded5aac1fd980d7c63dc655b3c +size 70526 diff --git a/images/Shaft_03925.png b/images/Shaft_03925.png new file mode 100644 index 0000000000000000000000000000000000000000..ec9afa8a22d0a742f930d343d8b026e569ee91d2 --- /dev/null +++ b/images/Shaft_03925.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f981ce041be66e8388c5a35e375d4fcbb5a55e9556a9144e1a3f2d8c88a2263b +size 74443 diff --git a/images/Shaft_03926.png b/images/Shaft_03926.png new file mode 100644 index 0000000000000000000000000000000000000000..e39ade1949ce8221a96417e8b7135b0256fe7dde --- /dev/null +++ b/images/Shaft_03926.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f80d6a64b040e8716ecf801811726cf9c2044f2f925a12610b72794bee45dbc +size 73754 diff --git a/images/Shaft_03927.png b/images/Shaft_03927.png new file mode 100644 index 0000000000000000000000000000000000000000..18092c3b128a65f04c96da5f51426c3cf1f1d094 --- /dev/null +++ b/images/Shaft_03927.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a06a6cbb2e9b2afcd2dc529192509e063dc9c756a920a726b9c14c363a121362 +size 84440 diff --git a/images/Shaft_03928.png b/images/Shaft_03928.png new file mode 100644 index 0000000000000000000000000000000000000000..85b3d46a015018eef4817e91af5e71bee26c3a0c --- /dev/null +++ b/images/Shaft_03928.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2dab5b9b5c99d5e3f10f05d930782b3b8bd86865c113f0499f2d7e15994da1cd +size 83279 diff --git a/images/Shaft_03929.png b/images/Shaft_03929.png new file mode 100644 index 0000000000000000000000000000000000000000..30741bb998508da0efcd5c3743b3a1899a74eae9 --- /dev/null +++ b/images/Shaft_03929.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be28ffc7312553c082af9e9876bdc3061c9d96bcdca716a66203df6fb0aec23c +size 89906 diff --git a/images/Shaft_03930.png b/images/Shaft_03930.png new file mode 100644 index 0000000000000000000000000000000000000000..180a5a9cef6332b37a1ee8348eca143d781de58c --- /dev/null +++ b/images/Shaft_03930.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:516d49366f6310166da391edd3ce555599d62f36f86d677a24847de4174e995a +size 71906 diff --git a/images/Shaft_03931.png b/images/Shaft_03931.png new file mode 100644 index 0000000000000000000000000000000000000000..74b7f62a498ae85a0171934c48a78c0c06f260fe --- /dev/null +++ b/images/Shaft_03931.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0876f552b1d87ea297ce4e3cf2d41ce1dc398be3f6a9b253b909bde7df872539 +size 75484 diff --git a/images/Shaft_03932.png b/images/Shaft_03932.png new file mode 100644 index 0000000000000000000000000000000000000000..c3fd53a8c4520f9ca13a35ac04fd972abfbc6a4f --- /dev/null +++ b/images/Shaft_03932.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15f2f9ec50132efbf81369770b8157381669aa3fec65b749ad9d72e3b51eeca4 +size 73995 diff --git a/images/Shaft_03933.png b/images/Shaft_03933.png new file mode 100644 index 0000000000000000000000000000000000000000..88e599deb768b4b7ee2f893f7aa004130638207d --- /dev/null +++ b/images/Shaft_03933.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49024a19233dff15c7c899e8cd51e0e84e5ced4e9a9be31255991d665b7bea57 +size 72356 diff --git a/images/Shaft_03934.png b/images/Shaft_03934.png new file mode 100644 index 0000000000000000000000000000000000000000..9721424cf215222d13b092693db955d5222cca40 --- /dev/null +++ b/images/Shaft_03934.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37f133b7e4957d717ad094589858f231b918f317987f08d80862e9762037b721 +size 71706 diff --git a/images/Shaft_03935.png b/images/Shaft_03935.png new file mode 100644 index 0000000000000000000000000000000000000000..b5975c0f544025b4ed6f6c6bcb9650b7a1656332 --- /dev/null +++ b/images/Shaft_03935.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82a1cfc45b21494495de259fbcad1776c837f54c3f9d490581bc77d1208100d3 +size 97225 diff --git a/images/Shaft_03936.png b/images/Shaft_03936.png new file mode 100644 index 0000000000000000000000000000000000000000..9d79827ee29f4d842d1a303fd9096f50e909198e --- /dev/null +++ b/images/Shaft_03936.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88fc4b77c3cca7f9f874a0c0da1008a2a139619b7c3d2f15d736f7517f713c54 +size 89146 diff --git a/images/Shaft_03937.png b/images/Shaft_03937.png new file mode 100644 index 0000000000000000000000000000000000000000..256b08360a2bb2714aeedbe208a2399783da9217 --- /dev/null +++ b/images/Shaft_03937.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe0017d2c1744a5ec70677c0502373cb8c76255c99a83c7a4b5cc9e5bad48465 +size 75192 diff --git a/images/Shaft_03938.png b/images/Shaft_03938.png new file mode 100644 index 0000000000000000000000000000000000000000..35eeb19bb148021ee458ec09e305df72d288c604 --- /dev/null +++ b/images/Shaft_03938.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ab243bb64a7e335f45040bc082532d529de7a99fe60a7db51e903d2fef8ecd6 +size 72242 diff --git a/images/Shaft_03939.png b/images/Shaft_03939.png new file mode 100644 index 0000000000000000000000000000000000000000..6ef854b914bacd3cfe99917a123672da011f7174 --- /dev/null +++ b/images/Shaft_03939.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2b0bafdbd1a9fa44c5700ac9fe393c066c47d43418b0a0f89e2de111c25918e +size 92258 diff --git a/images/Shaft_03940.png b/images/Shaft_03940.png new file mode 100644 index 0000000000000000000000000000000000000000..82f13a47545a10ece0e8c1ae944e3b03d8e1c58b --- /dev/null +++ b/images/Shaft_03940.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd119df381bf9bcf4193fbfb85304c04b640b62b2e3e96e8db9bc22520928a90 +size 108081 diff --git a/images/Shaft_03941.png b/images/Shaft_03941.png new file mode 100644 index 0000000000000000000000000000000000000000..aecee4e81f587afed877d22907ef01c0f3e56bf6 --- /dev/null +++ b/images/Shaft_03941.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fc5403f8751ed1ddcd81665e034d8d23e4bd2e681ef2bb3eeda3f92a5deffac9 +size 98111 diff --git a/images/Shaft_03942.png b/images/Shaft_03942.png new file mode 100644 index 0000000000000000000000000000000000000000..757985eb6ef1383c3c5e0f9bc91326fd3325ce26 --- /dev/null +++ b/images/Shaft_03942.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5fbf351f295c29b35da81e82fd986c1c9da5767577fac3283dc5e487799c9f72 +size 76532 diff --git a/images/Shaft_03943.png b/images/Shaft_03943.png new file mode 100644 index 0000000000000000000000000000000000000000..de06c6578de198287bf78e85841b082d7cf244b2 --- /dev/null +++ b/images/Shaft_03943.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:993c2a02c9e1395ae9997d25e993626f0f4d48ee50d0a1e14f2f8c822e026b7f +size 77457 diff --git a/images/Shaft_03944.png b/images/Shaft_03944.png new file mode 100644 index 0000000000000000000000000000000000000000..aaff697fa25c6443d9beba67607961d23537cbe8 --- /dev/null +++ b/images/Shaft_03944.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:900d8f1654b82c1361435895129a7af9fbeabdcca80e57c11b2a74461bd84d04 +size 77243 diff --git a/images/Shaft_03945.png b/images/Shaft_03945.png new file mode 100644 index 0000000000000000000000000000000000000000..6e79d9e7831f0f34e55c7925018c18417915fb2f --- /dev/null +++ b/images/Shaft_03945.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:57ddf84fedca109a7436dd86a313f2bb1f9ccfe085c895a8d3fa1f19efe7b467 +size 97966 diff --git a/images/Shaft_03946.png b/images/Shaft_03946.png new file mode 100644 index 0000000000000000000000000000000000000000..04d7b164d0881698cd5f64446bcbbf190be39343 --- /dev/null +++ b/images/Shaft_03946.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7330ed51087d31e55fdb49bdca8b363691a0337f4429445d9c0fa32467cdf08b +size 105316 diff --git a/images/Shaft_03947.png b/images/Shaft_03947.png new file mode 100644 index 0000000000000000000000000000000000000000..b25ba65ff783b801acf0d1485255b5c40b57ebea --- /dev/null +++ b/images/Shaft_03947.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:33dd9a1e28325dba92295424889c716833cfc02c2f837853bf08e97d76e55586 +size 81128 diff --git a/images/Shaft_03948.png b/images/Shaft_03948.png new file mode 100644 index 0000000000000000000000000000000000000000..dccf6c7ef406e654fbc10f68860176a016b58f39 --- /dev/null +++ b/images/Shaft_03948.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb4fb1803b615d620a427583723059a85f07f864385d0d2d5ce67a0bffecac75 +size 109360 diff --git a/images/Shaft_03949.png b/images/Shaft_03949.png new file mode 100644 index 0000000000000000000000000000000000000000..14972213e1d4b215263e24fc0f7143113ef575a5 --- /dev/null +++ b/images/Shaft_03949.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40ea8b7619f7fd05e4fae9dc43f43366f8eb4809feb66ebb75e0a8567c881dd9 +size 94557 diff --git a/images/Shaft_03950.png b/images/Shaft_03950.png new file mode 100644 index 0000000000000000000000000000000000000000..2a040635a12db32ef52e1741898e8f0002f873ec --- /dev/null +++ b/images/Shaft_03950.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab7f386955f692ce29e97c9310db3aade526e766539da1107724ee4ece627a3b +size 111477 diff --git a/images/Shaft_03951.png b/images/Shaft_03951.png new file mode 100644 index 0000000000000000000000000000000000000000..6d7797cd5dfa7a16496086d841485584279a189e --- /dev/null +++ b/images/Shaft_03951.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afc7a01200d2e53ed7b90e416619f68a86288ff3cbba2e7064e26eee64d18e1c +size 79464 diff --git a/images/Shaft_03952.png b/images/Shaft_03952.png new file mode 100644 index 0000000000000000000000000000000000000000..083d31228f591338a9e986fc17b266f1b24a34ee --- /dev/null +++ b/images/Shaft_03952.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c25a0241d75e11784bfcd9f1ee47097a754faf7e662f2abbb5f92633936e5bcb +size 84061 diff --git a/images/Shaft_03953.png b/images/Shaft_03953.png new file mode 100644 index 0000000000000000000000000000000000000000..b9c652274aa74b02cf9018c5aed9dcf03073e56a --- /dev/null +++ b/images/Shaft_03953.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d55843b226ac7894ab15467d25cd0abbf540ddde6ea0d0146d588dc5312672c +size 75956 diff --git a/images/Shaft_03954.png b/images/Shaft_03954.png new file mode 100644 index 0000000000000000000000000000000000000000..8b93368a2a94412561b69d064d871c3c92d98197 --- /dev/null +++ b/images/Shaft_03954.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:640740eb8a53c687a1538055f1b090a4741dcb174060c76d67eb73b91188f7d1 +size 73572 diff --git a/images/Shaft_03955.png b/images/Shaft_03955.png new file mode 100644 index 0000000000000000000000000000000000000000..ab9a9b0c8600163b1cbfe43226367e3ebfecb703 --- /dev/null +++ b/images/Shaft_03955.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f3d4c287f9a424af613456ee40c0b8458836b205edad74cdeb078216d2ef506 +size 70772 diff --git a/images/Shaft_03956.png b/images/Shaft_03956.png new file mode 100644 index 0000000000000000000000000000000000000000..2c3fae0735c7e8809ca86b36716585777ebf72d5 --- /dev/null +++ b/images/Shaft_03956.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90c65c687193b867ffce1a87120227fd77c001765d241b4857f0f7ae07153469 +size 76277 diff --git a/images/Shaft_03957.png b/images/Shaft_03957.png new file mode 100644 index 0000000000000000000000000000000000000000..f5e87b7d6fdcce1ff6b4e2e4ce28950a90f17596 --- /dev/null +++ b/images/Shaft_03957.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cf332d0ea9311082a488e9b501982052593ce4e0c3e4c2c6780198c5bb8df1c +size 82232 diff --git a/images/Shaft_03958.png b/images/Shaft_03958.png new file mode 100644 index 0000000000000000000000000000000000000000..4a467956599c542290aa95e90c4bf733131e0157 --- /dev/null +++ b/images/Shaft_03958.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4071955fa7f3b531ba44e577b62eec58d97d3a4dd721183cb5b165702c6534b5 +size 83387 diff --git a/images/Shaft_03959.png b/images/Shaft_03959.png new file mode 100644 index 0000000000000000000000000000000000000000..c007377fc3566d93ca9d960faed8e770a129af30 --- /dev/null +++ b/images/Shaft_03959.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:66401f5c852c702f1bea49b18a7434fb7541444c4cc3488a025e637da8159b4b +size 83809 diff --git a/images/Shaft_03960.png b/images/Shaft_03960.png new file mode 100644 index 0000000000000000000000000000000000000000..f0480218925037fb0645117a8dae5b9ab32c498e --- /dev/null +++ b/images/Shaft_03960.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21f732f248c9ac166996b975b9f96d75de162443337890a8fd59ddbc13d6556e +size 77795 diff --git a/images/Shaft_03961.png b/images/Shaft_03961.png new file mode 100644 index 0000000000000000000000000000000000000000..e1c0e576449b1a9ebc7cb408f7dbd3c2bf4f8269 --- /dev/null +++ b/images/Shaft_03961.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74b2958f0ab17f68d0d0898e0a29ccbcf0b681ac4654da530e6d11c8cb39800a +size 107369 diff --git a/images/Shaft_03962.png b/images/Shaft_03962.png new file mode 100644 index 0000000000000000000000000000000000000000..b8e05749e9277d4c041ff99649ee8ecd38c3c4bc --- /dev/null +++ b/images/Shaft_03962.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27339a16e75436f7a5eb6811dc71c062987dd20fb439118055e21d150cd76361 +size 80606 diff --git a/images/Shaft_03963.png b/images/Shaft_03963.png new file mode 100644 index 0000000000000000000000000000000000000000..21001444a42498ccde35253bef4c8d9cf5ba8bf7 --- /dev/null +++ b/images/Shaft_03963.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12ee9d9c6951bdfac69540299b4da084166f7363b2192ee2a9f6972b230529c7 +size 111659 diff --git a/images/Shaft_03964.png b/images/Shaft_03964.png new file mode 100644 index 0000000000000000000000000000000000000000..c39a0a68d486c05fa76b8186c120ec1cc20487f8 --- /dev/null +++ b/images/Shaft_03964.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6820d1095f27f384e8fc679721b95ea2656efee82f60d20f609b65ab1512c08 +size 96163 diff --git a/images/Shaft_03965.png b/images/Shaft_03965.png new file mode 100644 index 0000000000000000000000000000000000000000..32adc3ea1506524501e27defb2e5462126b0a1b4 --- /dev/null +++ b/images/Shaft_03965.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:78af83dfede3e307c2f9c31304edeb7ba511ea5de6348a77c32e3be78e158912 +size 103612 diff --git a/images/Shaft_03966.png b/images/Shaft_03966.png new file mode 100644 index 0000000000000000000000000000000000000000..186f63387abbdeae799fe65ea347ce7c4403aef5 --- /dev/null +++ b/images/Shaft_03966.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:069ec4def26399a46fac93ca93da9d1b5958821ace7d4cb2f3956c5d64c1f18d +size 78945 diff --git a/images/Shaft_03967.png b/images/Shaft_03967.png new file mode 100644 index 0000000000000000000000000000000000000000..c9bdf1a5bb2f902f2ce61f4db2aa2e5cacd35023 --- /dev/null +++ b/images/Shaft_03967.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba6dea97f975e1bda19a77a1f3e5bbfd15864e5f0afa4f7bbac024b480e86676 +size 72579 diff --git a/images/Shaft_03968.png b/images/Shaft_03968.png new file mode 100644 index 0000000000000000000000000000000000000000..58d98d0ed59bc444ccd09b994dd158086682729f --- /dev/null +++ b/images/Shaft_03968.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73f735b1773b5b9b047cc986bec7aa3df6b5d361f1552cbc05b124ae74a75619 +size 75038 diff --git a/images/Shaft_03969.png b/images/Shaft_03969.png new file mode 100644 index 0000000000000000000000000000000000000000..cf0d8718f33f0c54a555126513039eb2e1513898 --- /dev/null +++ b/images/Shaft_03969.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f8ab08b1e4cdb942b6614a3ca212ab806685f2bc6a25c74448ed745f44eade0 +size 78471 diff --git a/images/Shaft_03970.png b/images/Shaft_03970.png new file mode 100644 index 0000000000000000000000000000000000000000..01fc58cc9c9a832ee3297002af24e5ee52a2637a --- /dev/null +++ b/images/Shaft_03970.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b2372686735452637ff6c6c76a6cc2cc395f63768501bc0ae41ed0ed89676b3c +size 70433 diff --git a/images/Shaft_03971.png b/images/Shaft_03971.png new file mode 100644 index 0000000000000000000000000000000000000000..2cce27d8135a22baebe71a1350426e21d5b15988 --- /dev/null +++ b/images/Shaft_03971.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1d9c75ded1a9a1dd2f981140dab0d30cfa745a63e8b2116b36cc7df500a47a2 +size 94070 diff --git a/images/Shaft_03972.png b/images/Shaft_03972.png new file mode 100644 index 0000000000000000000000000000000000000000..d68b1f3962badfc3df4d9078c6df51bfe9b551f4 --- /dev/null +++ b/images/Shaft_03972.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:54bf13bfb440d9efbdf1d0498ada2d2073af1725a3ac0eaba95619e362976919 +size 89557 diff --git a/images/Shaft_03973.png b/images/Shaft_03973.png new file mode 100644 index 0000000000000000000000000000000000000000..28484396b08cc8749bf429277ebcd50310a50266 --- /dev/null +++ b/images/Shaft_03973.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46dede68631f6b7b3e2571dffe9cfd0e8fddea279c1c4e3cb2e1560af5973316 +size 90093 diff --git a/images/Shaft_03974.png b/images/Shaft_03974.png new file mode 100644 index 0000000000000000000000000000000000000000..251c8978a10641fc61504d55a5ff5736e855a50a --- /dev/null +++ b/images/Shaft_03974.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7d7b28aa6a8d6a1503623f0950b6bb3e3db466ee30164325391be60cf43a6d68 +size 84182 diff --git a/images/Shaft_03975.png b/images/Shaft_03975.png new file mode 100644 index 0000000000000000000000000000000000000000..a9ae37fff990d361c728050974be672bcfabeb59 --- /dev/null +++ b/images/Shaft_03975.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fe610e9e623a6aa990d6d243690b8502601152f4a6657ecc4c7350d254975eb +size 71651 diff --git a/images/Shaft_03976.png b/images/Shaft_03976.png new file mode 100644 index 0000000000000000000000000000000000000000..69c008020f5875ac42491e165c9cc73bf563510b --- /dev/null +++ b/images/Shaft_03976.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:90ee472faea7417547b8af755b82a0604e4d613db23196067ae418c18fa5235a +size 97377 diff --git a/images/Shaft_03977.png b/images/Shaft_03977.png new file mode 100644 index 0000000000000000000000000000000000000000..36d01ccda735db5c63e1b4995b74265080dc6561 --- /dev/null +++ b/images/Shaft_03977.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd5db09fa33ac671139cb966e2f91b3346c8df4836526abf44279a30fbd4fc36 +size 82804 diff --git a/images/Shaft_03978.png b/images/Shaft_03978.png new file mode 100644 index 0000000000000000000000000000000000000000..1ad4f7205a0b8d43cac7e9e20658a61f5702314a --- /dev/null +++ b/images/Shaft_03978.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec4d5f577ab087bc55dca2a26fa0fb88dd8bde6e5c9b165a6b3b9846f1c584cd +size 104874 diff --git a/images/Shaft_03979.png b/images/Shaft_03979.png new file mode 100644 index 0000000000000000000000000000000000000000..6671f26e0f15ca54a66c1fe9e9ad49e0d7159144 --- /dev/null +++ b/images/Shaft_03979.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47cf01bb7f1b2c0da96b18510e4a2009345e976470673db269afb51e934f2a78 +size 95541 diff --git a/images/Shaft_03980.png b/images/Shaft_03980.png new file mode 100644 index 0000000000000000000000000000000000000000..f5d639ffca6548dc7975154993bf1f2cb98ad756 --- /dev/null +++ b/images/Shaft_03980.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e03bd011a7296bf9951ca61ffba975966e233424b39b479efb6acad5c44772d +size 72609 diff --git a/images/Shaft_03981.png b/images/Shaft_03981.png new file mode 100644 index 0000000000000000000000000000000000000000..d5507e902e339cb6565904df49d91233da6a9454 --- /dev/null +++ b/images/Shaft_03981.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:548e067486af009a425be59380917c6fa26a21b6f1fbce43f0cdd942f4cbd29d +size 102768 diff --git a/images/Shaft_03982.png b/images/Shaft_03982.png new file mode 100644 index 0000000000000000000000000000000000000000..deea032d4173401886b38a1b824fbd482a19540a --- /dev/null +++ b/images/Shaft_03982.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee8be0278d6bfb2159d8bf4bc4e36a4d9b0abff987d919de264c461205f1e2fb +size 84549 diff --git a/images/Shaft_03983.png b/images/Shaft_03983.png new file mode 100644 index 0000000000000000000000000000000000000000..5d55055feef49f4bbb933dc196340be99c70ad52 --- /dev/null +++ b/images/Shaft_03983.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:34d0f523deccff2296d3909fdb9e37b7f42a22dfba303d896d99a1a7b86571a7 +size 103615 diff --git a/images/Shaft_03984.png b/images/Shaft_03984.png new file mode 100644 index 0000000000000000000000000000000000000000..9a9f1e5b942d74655d16221359219cc57616deab --- /dev/null +++ b/images/Shaft_03984.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef5d14de030a85e1e3bbc2ec132e11586c43cd0a82ca28f1f2a7775cfb4c5c7a +size 91361 diff --git a/images/Shaft_03985.png b/images/Shaft_03985.png new file mode 100644 index 0000000000000000000000000000000000000000..92b621372db8ef7248a6b4043ae780ee49340e4f --- /dev/null +++ b/images/Shaft_03985.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff7c6354932576c494d29b3c2800738436cac590275de3a484f84a27e9656348 +size 72512 diff --git a/images/Shaft_03986.png b/images/Shaft_03986.png new file mode 100644 index 0000000000000000000000000000000000000000..b2dfb79a1f852803a806f5fd980bfc5a73ea7de2 --- /dev/null +++ b/images/Shaft_03986.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f0691b95522baef41a6b8fe807f119d1d8b69935d6d58f88310c78d0164c937 +size 112697 diff --git a/images/Shaft_03987.png b/images/Shaft_03987.png new file mode 100644 index 0000000000000000000000000000000000000000..2a3f8ef783989463b48e9e26d1345328c50ff9dd --- /dev/null +++ b/images/Shaft_03987.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ee8ebedd27f61665e6191360daea8b8933906e15377c31f9ce7cbca2e1ba705 +size 78314 diff --git a/images/Shaft_03988.png b/images/Shaft_03988.png new file mode 100644 index 0000000000000000000000000000000000000000..53669e1e44f59bc2a10c18b89597a8bb5de945ac --- /dev/null +++ b/images/Shaft_03988.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a30d0e777ff94d10848a3c4f0924dede91075f9dfe25b083964f0d7f0c5b044c +size 108116 diff --git a/images/Shaft_03989.png b/images/Shaft_03989.png new file mode 100644 index 0000000000000000000000000000000000000000..192d2af3af0bb0423fadd913f1a651c8493f5e3a --- /dev/null +++ b/images/Shaft_03989.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28ef6389c1d539e808fe7de4eb2eb67cae963d0f70c1354c2fb3983ec9b0bf38 +size 93947 diff --git a/images/Shaft_03990.png b/images/Shaft_03990.png new file mode 100644 index 0000000000000000000000000000000000000000..5b994519890cb32ea26c8646e744fce58ab8c43a --- /dev/null +++ b/images/Shaft_03990.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9abe41e6c341d862a8b720eb4b725c1b464ab4c649cf4892d27e5e1fa75a449a +size 88345 diff --git a/images/Shaft_03991.png b/images/Shaft_03991.png new file mode 100644 index 0000000000000000000000000000000000000000..103b14c48b7499db673e5996afbb7091bb9c48d8 --- /dev/null +++ b/images/Shaft_03991.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:140f0730fba236a5cb4d4fc5751dc6944d6a487a88fe4d4b15a0c27453d4b497 +size 84349 diff --git a/images/Shaft_03992.png b/images/Shaft_03992.png new file mode 100644 index 0000000000000000000000000000000000000000..9253962b1ff35feb8c5ac07fb353223ae5194f2d --- /dev/null +++ b/images/Shaft_03992.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcd3c20b11e1b00f59f5eca0e7828b11a07365e2cfd3d22085425e1a9c6328f8 +size 87108 diff --git a/images/Shaft_03993.png b/images/Shaft_03993.png new file mode 100644 index 0000000000000000000000000000000000000000..7b9f9254f589f1727c81b82440307793187e1cfb --- /dev/null +++ b/images/Shaft_03993.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a9be77050a7b59e036a33513ec6c2dc5359db986347d65d791cd38697bcf941e +size 89231 diff --git a/images/Shaft_03994.png b/images/Shaft_03994.png new file mode 100644 index 0000000000000000000000000000000000000000..58553733088192dfbdb93aa84fd1a7c11bcf325b --- /dev/null +++ b/images/Shaft_03994.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4276704f37933dcf68431a198a9082b9dc9a2bf2227bf17fc77cfd8923a031c4 +size 104425 diff --git a/images/Shaft_03995.png b/images/Shaft_03995.png new file mode 100644 index 0000000000000000000000000000000000000000..5147fdd80320a78073a596d170b4b9c996e17dbc --- /dev/null +++ b/images/Shaft_03995.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f304e5cf0f45ef655348a50a94f1c203212f60e00c39fe8431680a408dab60cd +size 90259 diff --git a/images/Shaft_03996.png b/images/Shaft_03996.png new file mode 100644 index 0000000000000000000000000000000000000000..748b80cf1dbe4b5f86c6741f26ac3f1cb16b8591 --- /dev/null +++ b/images/Shaft_03996.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eae4cdded55fbaf906c58cf3f2ad2ab8d8d6dc2c624d4105bbaad50061426d71 +size 112298 diff --git a/images/Shaft_03997.png b/images/Shaft_03997.png new file mode 100644 index 0000000000000000000000000000000000000000..7d12d0638d6d7e8ce4800d514daf7d73147161cd --- /dev/null +++ b/images/Shaft_03997.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6e282dd0bfec0f76e3476b155ac1a3ebf8c1471758dec2d6ee7d22560cd0539 +size 97317 diff --git a/images/Shaft_03998.png b/images/Shaft_03998.png new file mode 100644 index 0000000000000000000000000000000000000000..f362bfdbdbb0a52612e8486cfd2aa0808669313c --- /dev/null +++ b/images/Shaft_03998.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e888869502df706bd6765eb99261124b643d11fa0f3dc165e52183248bc224c +size 89763 diff --git a/images/Shaft_03999.png b/images/Shaft_03999.png new file mode 100644 index 0000000000000000000000000000000000000000..4738dac6dda409e7329f5307b58da180f27972df --- /dev/null +++ b/images/Shaft_03999.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:702ab4d3f18846f96953f798b23c9866ace9cfab332ee8a7bff25bd5f8b78caa +size 99057 diff --git a/images/Shaft_04000.png b/images/Shaft_04000.png new file mode 100644 index 0000000000000000000000000000000000000000..f36c0edafadc368c2390c52af49f744f3c90fc57 --- /dev/null +++ b/images/Shaft_04000.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e0e0755916136fa4abb067b0344cd6bd30212277a722edc24db059ba99673acb +size 84230 diff --git a/images/Shaft_04001.png b/images/Shaft_04001.png new file mode 100644 index 0000000000000000000000000000000000000000..20422da873f4361eed059720af07b662e7370611 --- /dev/null +++ b/images/Shaft_04001.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5fd23ba9fa794138e29f8fd7d368d74011e17933b2b127dbab8b54bdf935d06 +size 104531 diff --git a/images/Shaft_04002.png b/images/Shaft_04002.png new file mode 100644 index 0000000000000000000000000000000000000000..3fc3f5ba1811049f790b8b6bdbef0d7c5ce5097f --- /dev/null +++ b/images/Shaft_04002.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a49868f51d8b8b2217014b8a93bea508147cf0b94f97474c98904fb7233668c +size 86217 diff --git a/images/Shaft_04003.png b/images/Shaft_04003.png new file mode 100644 index 0000000000000000000000000000000000000000..f6fb189fcb066785b3b4c36153330caca657c957 --- /dev/null +++ b/images/Shaft_04003.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43c75b13f4e6b1dcf4a0230384d63a861f7eb7be5a2b54a5bee3f32315e3059a +size 70753 diff --git a/images/Shaft_04004.png b/images/Shaft_04004.png new file mode 100644 index 0000000000000000000000000000000000000000..5568dc9f71931ae2bc41ec00c5004deef43e2a7b --- /dev/null +++ b/images/Shaft_04004.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d411e986cfff7f2ad50447f0936ca6bacb92d3278f218f0a6569c3eb9026a913 +size 70727 diff --git a/images/Shaft_04005.png b/images/Shaft_04005.png new file mode 100644 index 0000000000000000000000000000000000000000..809df263025f7832fa358eb3ab53a2544f225948 --- /dev/null +++ b/images/Shaft_04005.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac1beb88ad33bc32e7c9fd53a2a6cabc728212042b002f1df2fb66506486d2d9 +size 109053 diff --git a/images/Shaft_04006.png b/images/Shaft_04006.png new file mode 100644 index 0000000000000000000000000000000000000000..235b206553137a2e967aa6a0e9c085e3de548750 --- /dev/null +++ b/images/Shaft_04006.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cdeab22efc188aa7b5f9bc8464ad9c6de31e7c8d4c6d97b04153fa7d9366ca6 +size 103796 diff --git a/images/Shaft_04007.png b/images/Shaft_04007.png new file mode 100644 index 0000000000000000000000000000000000000000..a4fd6d64dd11b776502b2edd53a4e51ce34c04c1 --- /dev/null +++ b/images/Shaft_04007.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59bbd10349bb9009ac787e061cc1acc4b64131e9c435ad9d78095bef6e83e8ba +size 97843 diff --git a/images/Shaft_04008.png b/images/Shaft_04008.png new file mode 100644 index 0000000000000000000000000000000000000000..0254a0cad686a3e3b93a6c89209683f66f4bac91 --- /dev/null +++ b/images/Shaft_04008.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:67c7c9cbf2bfc94432c97fc714dee382dcc6f84bacad41934d147f51d21bdb19 +size 77030 diff --git a/images/Shaft_04009.png b/images/Shaft_04009.png new file mode 100644 index 0000000000000000000000000000000000000000..5d7d489cb14ba4ef2895bc29774c456f8ab4a7c4 --- /dev/null +++ b/images/Shaft_04009.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d3823655f51d2fd98080f10241a362416c253d4ff2ccadf5e413af07922f48e +size 104132 diff --git a/images/Shaft_04010.png b/images/Shaft_04010.png new file mode 100644 index 0000000000000000000000000000000000000000..482f6afd65e3504025a9b7c72a068cf90c51347c --- /dev/null +++ b/images/Shaft_04010.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c3918026c678e59f8855f67d1b2f5b120a992d83a4f5af17b6efec3aef604be +size 118623 diff --git a/images/Shaft_04011.png b/images/Shaft_04011.png new file mode 100644 index 0000000000000000000000000000000000000000..2d382b9dc93299a39eb0b3e54674c8adf1091e21 --- /dev/null +++ b/images/Shaft_04011.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e1743856e91fee4c09bcee678b0b41dea441f4b4f6ebdabf04c32c42f13b519 +size 69334 diff --git a/images/Shaft_04012.png b/images/Shaft_04012.png new file mode 100644 index 0000000000000000000000000000000000000000..e099041f8fb979bb54b52e1814693f0244a99b31 --- /dev/null +++ b/images/Shaft_04012.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf639e07073342dc126a85dd5bb2337502a99c8a6682588389ce69ee39314841 +size 95849 diff --git a/images/Shaft_04013.png b/images/Shaft_04013.png new file mode 100644 index 0000000000000000000000000000000000000000..171e9c1cd0bfb0472cc1674a2b4b135660ee5ae4 --- /dev/null +++ b/images/Shaft_04013.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bf6344737822bb427982748f344d36c989bf03328463c8db06037495ec25dda +size 74947 diff --git a/images/Shaft_04014.png b/images/Shaft_04014.png new file mode 100644 index 0000000000000000000000000000000000000000..fa39fa4b9bd6cc0d4261494cb52fbe85159a03a7 --- /dev/null +++ b/images/Shaft_04014.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a006761223405173023a18322a51929e043cd6de247f38e586d76c87bda04e2e +size 74738 diff --git a/images/Shaft_04015.png b/images/Shaft_04015.png new file mode 100644 index 0000000000000000000000000000000000000000..88e3f95ddfcfdd2d3a8b4d2a5ce06045900d900c --- /dev/null +++ b/images/Shaft_04015.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5744e42d39a55eaabb6667c5ebc0a946304b8e0cb765d0dce10f57659e9bdf6 +size 97099 diff --git a/images/Shaft_04016.png b/images/Shaft_04016.png new file mode 100644 index 0000000000000000000000000000000000000000..f119e0c2d0f17d308abc6c9ae9613880140150e5 --- /dev/null +++ b/images/Shaft_04016.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c23c061743a825d667ea76779ad029f79f5a66eea23692a06fffde38ae848b7b +size 69490 diff --git a/images/Shaft_04017.png b/images/Shaft_04017.png new file mode 100644 index 0000000000000000000000000000000000000000..8e232c0b3204541aea555d62508574b1c801d376 --- /dev/null +++ b/images/Shaft_04017.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc45bea2eab749e659a5e092a8c771101fd810e1cc97630beabc2bfc374c8413 +size 73284 diff --git a/images/Shaft_04018.png b/images/Shaft_04018.png new file mode 100644 index 0000000000000000000000000000000000000000..56233f75a44e1c3aa4ced3df39394ed1149891d9 --- /dev/null +++ b/images/Shaft_04018.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0421560c9b068d3b086c91d467519d14dca87cdce637ec25c031460e1722b63f +size 90039 diff --git a/images/Shaft_04019.png b/images/Shaft_04019.png new file mode 100644 index 0000000000000000000000000000000000000000..5fe88a320f2985112c210926445d92e8f151f11f --- /dev/null +++ b/images/Shaft_04019.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0af10d761769ce37d91b24c73642c396634ef3d157ce513bf19020128109383c +size 85633 diff --git a/images/Shaft_04020.png b/images/Shaft_04020.png new file mode 100644 index 0000000000000000000000000000000000000000..6c4262818809ec099d295b3c9ee2ee16b3e893aa --- /dev/null +++ b/images/Shaft_04020.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98ca9c2e3ec8f9ff540fe423c6195b97585d81742907a96ae6f7e4a774a5cd63 +size 87240 diff --git a/images/Shaft_04021.png b/images/Shaft_04021.png new file mode 100644 index 0000000000000000000000000000000000000000..70b549edb98c8a7c732d2ff84178754429ff32d5 --- /dev/null +++ b/images/Shaft_04021.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:134feae246684d0e95fc3e1118fd8ae3ad9a461edd7fb6c49dec0d0009642a2d +size 101621 diff --git a/images/Shaft_04022.png b/images/Shaft_04022.png new file mode 100644 index 0000000000000000000000000000000000000000..e6714f0453238af6dd159d143e910f96bce4f763 --- /dev/null +++ b/images/Shaft_04022.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:19f7ca780638ece411ed1186cb735596d52fcade324100aef4a08aeab63a9a5f +size 104748 diff --git a/images/Shaft_04023.png b/images/Shaft_04023.png new file mode 100644 index 0000000000000000000000000000000000000000..ea15d1417d51a6c7ba81a0f22c606384177596e5 --- /dev/null +++ b/images/Shaft_04023.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:05d5d32fe018bf052a47dee518b94912d3f22e4282c0162e7e874797c22e00b8 +size 79871 diff --git a/images/Shaft_04024.png b/images/Shaft_04024.png new file mode 100644 index 0000000000000000000000000000000000000000..fba94b56b69b07b51e7a86c0e2fcdd0cda5a32cf --- /dev/null +++ b/images/Shaft_04024.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1c9ae475e1b890ad0a432fba81badd9c7fb42451a424f4ce3c7225a3f64db36 +size 74822 diff --git a/images/Shaft_04025.png b/images/Shaft_04025.png new file mode 100644 index 0000000000000000000000000000000000000000..5242dd19212071fd0338e4ba0da3098ef44ae2b4 --- /dev/null +++ b/images/Shaft_04025.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3968a1a2fd1342ff81c21b111626698528d29d749c88031c9a0be7b0ff907bb2 +size 105533 diff --git a/images/Shaft_04026.png b/images/Shaft_04026.png new file mode 100644 index 0000000000000000000000000000000000000000..8c104c4e5a67d4903be0832ccbe9f63c16c8b803 --- /dev/null +++ b/images/Shaft_04026.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:848af6e6dffe843d11fb1205f310120e0be622e4f700f2589dd93e9987f2385a +size 96668 diff --git a/images/Shaft_04027.png b/images/Shaft_04027.png new file mode 100644 index 0000000000000000000000000000000000000000..813f7d8cfa4bdbd7eccb5eda6228713aca88b458 --- /dev/null +++ b/images/Shaft_04027.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:163199ecb40f39bce99e2301e943f7740117a12360fc9e303a48ff50f776369e +size 78055 diff --git a/images/Shaft_04028.png b/images/Shaft_04028.png new file mode 100644 index 0000000000000000000000000000000000000000..d166b3717affbbf9ec3008bee9e9ea31a7890cf1 --- /dev/null +++ b/images/Shaft_04028.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b38e0d1d85b0481a0b54e24199a730455b013f6638bea0cd597729fde0970ded +size 100788 diff --git a/images/Shaft_04029.png b/images/Shaft_04029.png new file mode 100644 index 0000000000000000000000000000000000000000..96157ce3e5fe2a61923cb91dd539d514313f9527 --- /dev/null +++ b/images/Shaft_04029.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff60b7e71d94dd25b44d79ebb539a615a03070e919a933d32c8f1350d59be4b0 +size 70980 diff --git a/images/Shaft_04030.png b/images/Shaft_04030.png new file mode 100644 index 0000000000000000000000000000000000000000..800870b7ba721f9d416f7750dce90fac3fc1516e --- /dev/null +++ b/images/Shaft_04030.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00b346482910e04bc913834bda121ba148b40acae36554aebc55a7450a48b868 +size 70729 diff --git a/images/Shaft_04031.png b/images/Shaft_04031.png new file mode 100644 index 0000000000000000000000000000000000000000..b12b3dea9ceb4e8333f5ef82d3f8983801d05947 --- /dev/null +++ b/images/Shaft_04031.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a557f8b9bc747d982930876e0b7edba86e6a5d2a96bc6afa98f9822f9d2f9a05 +size 73871 diff --git a/images/Shaft_04032.png b/images/Shaft_04032.png new file mode 100644 index 0000000000000000000000000000000000000000..25968cc994ae9167691f1aa01053688f3323c92e --- /dev/null +++ b/images/Shaft_04032.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a43193411e1ab00315669fa1c28d6611e2c9a13034959e3d59a60bc369f2bad +size 70202 diff --git a/images/Shaft_04033.png b/images/Shaft_04033.png new file mode 100644 index 0000000000000000000000000000000000000000..e8288c9f58d90cbba8c4d1332aca6d9897b02d32 --- /dev/null +++ b/images/Shaft_04033.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18a8b5b173d6d2d608066a048f606c6e7856302440f977aa1ae0e7826051cbbb +size 73461 diff --git a/images/Shaft_04034.png b/images/Shaft_04034.png new file mode 100644 index 0000000000000000000000000000000000000000..294e5a7574cc3093c42731fe67ccf41019a535c9 --- /dev/null +++ b/images/Shaft_04034.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fd334f1f29db85b9cefd0d903a0f1cf2f0974c4349e890467e89cfcb1d1895e4 +size 84894 diff --git a/images/Shaft_04035.png b/images/Shaft_04035.png new file mode 100644 index 0000000000000000000000000000000000000000..0abf7da78f7c53a05876c7990e3de7862eb6bff7 --- /dev/null +++ b/images/Shaft_04035.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5b4cda7c297116d05441012a989910cc88ac6f2cd3f612a0d13975b414c0956 +size 80807 diff --git a/images/Shaft_04036.png b/images/Shaft_04036.png new file mode 100644 index 0000000000000000000000000000000000000000..184ddf38fe344a338a95ca64647e927a1ede5edc --- /dev/null +++ b/images/Shaft_04036.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5101423f753613064f57941d4b2beb3a5c882f1fe99be18060c560b4fd4b126b +size 91651 diff --git a/images/Shaft_04037.png b/images/Shaft_04037.png new file mode 100644 index 0000000000000000000000000000000000000000..10ae6a93910febc2a6b8fe17b7a59cda3de833e5 --- /dev/null +++ b/images/Shaft_04037.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:774c14eb5af9ebe7f21ea26a1d9a5cf20b8f8c5517650f06947a6151fc371a6a +size 103640 diff --git a/images/Shaft_04038.png b/images/Shaft_04038.png new file mode 100644 index 0000000000000000000000000000000000000000..04499191fecf01ce100edd0403276c17adb67bb7 --- /dev/null +++ b/images/Shaft_04038.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:944132b04be8e5a82c11bbf92f919afdb30f90051ad438453758509d6affe57a +size 89326 diff --git a/images/Shaft_04039.png b/images/Shaft_04039.png new file mode 100644 index 0000000000000000000000000000000000000000..3342b8247d4a3e615fa51095878178d280b5147a --- /dev/null +++ b/images/Shaft_04039.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45a8c391520d32edee842678e733a728b0c51e1000710ae34fcbeda91600abf9 +size 78204 diff --git a/images/Shaft_04040.png b/images/Shaft_04040.png new file mode 100644 index 0000000000000000000000000000000000000000..e21478e02392d3ac6eee1d3517785b2f0fe1ecd2 --- /dev/null +++ b/images/Shaft_04040.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa7d9eba29b5a0279031b94ee8845e3a94742b0d848400441c4b3b3790ab9416 +size 84650 diff --git a/images/Shaft_04041.png b/images/Shaft_04041.png new file mode 100644 index 0000000000000000000000000000000000000000..2f7b3c401d83019a1f1da1a1e67518d152b1ac97 --- /dev/null +++ b/images/Shaft_04041.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed0d309937c36e998af2f2ec26b5c0e5398091a61636f5261acc5f60e468f199 +size 77852 diff --git a/images/Shaft_04042.png b/images/Shaft_04042.png new file mode 100644 index 0000000000000000000000000000000000000000..4af22e63a9e548d33efc6c9929daba03618c7a28 --- /dev/null +++ b/images/Shaft_04042.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bf7676d76bb9b2aa904cd0b6cfb70d5993282039307ca31769e1841004dfa59 +size 72297 diff --git a/images/Shaft_04043.png b/images/Shaft_04043.png new file mode 100644 index 0000000000000000000000000000000000000000..ca5492b23dbffcf0bfdcd12b6d6c4de50a384e99 --- /dev/null +++ b/images/Shaft_04043.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8fc172eec2357cdd93c221d9888f92fb7db929b69ea3fe8dfa9c9a963c36a46c +size 70318 diff --git a/images/Shaft_04044.png b/images/Shaft_04044.png new file mode 100644 index 0000000000000000000000000000000000000000..45350a2a0f73f86542c58f6f6674bc5ac3a1ce51 --- /dev/null +++ b/images/Shaft_04044.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5700340e41fc422c737c98a3c7e0562bbd5d3632756626a1f6b7a65b5a65d363 +size 77016 diff --git a/images/Shaft_04045.png b/images/Shaft_04045.png new file mode 100644 index 0000000000000000000000000000000000000000..1432735835c305a83ce3aa6837edd25a776dd533 --- /dev/null +++ b/images/Shaft_04045.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:82d3eed28ff6257c5a7cce0915f1590942c44039928d2a00b107bf1d1691255b +size 95830 diff --git a/images/Shaft_04046.png b/images/Shaft_04046.png new file mode 100644 index 0000000000000000000000000000000000000000..1c97bf7c9296ae4e6f7cdeae485859a2fb532590 --- /dev/null +++ b/images/Shaft_04046.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f845bc18690e6ebbc93530368124ef0ca173ac372daefd9da78ffc4dff8047ad +size 87031 diff --git a/images/Shaft_04047.png b/images/Shaft_04047.png new file mode 100644 index 0000000000000000000000000000000000000000..64177ed701ff91fd0e9a6f37b07537d92553dc30 --- /dev/null +++ b/images/Shaft_04047.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c1209625fcb8130b37b66b8b3c7b5482e8f5aeb3683d85984b04a6f6264e835 +size 106236 diff --git a/images/Shaft_04048.png b/images/Shaft_04048.png new file mode 100644 index 0000000000000000000000000000000000000000..1290e08ea76f84921ae98a5ed6fc2be7550b13f8 --- /dev/null +++ b/images/Shaft_04048.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cdfce624175a7ed2cf2548102ea162a884c489c7a264d4664630530b2845e74 +size 67962 diff --git a/images/Shaft_04049.png b/images/Shaft_04049.png new file mode 100644 index 0000000000000000000000000000000000000000..c8002cff8f82f916482e8ad2c076654b737a7210 --- /dev/null +++ b/images/Shaft_04049.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:599b7b85e54b26407c54d525efae16c638ef86ea0db63ac14c1334dd665b08a3 +size 88720 diff --git a/images/Shaft_04050.png b/images/Shaft_04050.png new file mode 100644 index 0000000000000000000000000000000000000000..07cca0e30b3e456de8c107ad33d3a0b7b740ba46 --- /dev/null +++ b/images/Shaft_04050.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:487dc8c7c02b73dc3fd8a5ff117c25e4adf962915974d1af849ca30d18ef7172 +size 95681 diff --git a/images/Shaft_04051.png b/images/Shaft_04051.png new file mode 100644 index 0000000000000000000000000000000000000000..537547690d19b1b0ab43990833cd55d1814081a4 --- /dev/null +++ b/images/Shaft_04051.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e37844066391284bfaf5a0e7e8057590a347a4a0388540a2e24330e0b2efdbb +size 86780 diff --git a/images/Shaft_04052.png b/images/Shaft_04052.png new file mode 100644 index 0000000000000000000000000000000000000000..ddc5c28b467d557011dbf61bcceb30284d8ca3d5 --- /dev/null +++ b/images/Shaft_04052.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6246462185de1b0ce153b3b3e9786ccb3564f90c1118923fd32a14922966051e +size 91232 diff --git a/images/Shaft_04053.png b/images/Shaft_04053.png new file mode 100644 index 0000000000000000000000000000000000000000..22e32e16edd91b6160e776f66520d575b27db2e4 --- /dev/null +++ b/images/Shaft_04053.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:064d0266733ed2cc432f12f2274680bcb0379cb811493262e0b94458a1f3607a +size 81504 diff --git a/images/Shaft_04054.png b/images/Shaft_04054.png new file mode 100644 index 0000000000000000000000000000000000000000..149ccd8f0ee8b872724abe97b93b8afd19f9d8f5 --- /dev/null +++ b/images/Shaft_04054.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d72c85a6b8e950de6a6e56517ca7a6b3c27f522e09919a56591a3d88fc3792b +size 86813 diff --git a/images/Shaft_04055.png b/images/Shaft_04055.png new file mode 100644 index 0000000000000000000000000000000000000000..dd8abf8f3342f5bed3c10e0f3d335d6a3f04bfa6 --- /dev/null +++ b/images/Shaft_04055.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6f668db2ce7df40629b0cefdf428d55546692ab15410e22074e219535bfb16b +size 84787 diff --git a/images/Shaft_04056.png b/images/Shaft_04056.png new file mode 100644 index 0000000000000000000000000000000000000000..b457f8586869c6a950c40857d031c8b69592b840 --- /dev/null +++ b/images/Shaft_04056.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a877494a082bcb422312f49a7f0d283478726a7072a1066b6021cb0f4d58d7e7 +size 89150 diff --git a/images/Shaft_04057.png b/images/Shaft_04057.png new file mode 100644 index 0000000000000000000000000000000000000000..ee347526242d00daaf74bd3a3a533fe95c5db892 --- /dev/null +++ b/images/Shaft_04057.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a87d7d6c3761b3d80aaa56ec71cc63968b37af314204958083d7b5f5ac52f5b3 +size 75208 diff --git a/images/Shaft_04058.png b/images/Shaft_04058.png new file mode 100644 index 0000000000000000000000000000000000000000..fe1bd5c9176ee3e523c7c586baedb6a551af0432 --- /dev/null +++ b/images/Shaft_04058.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2f206993595965232247d10902cef15fb9497850bb9f0a668c6820e2e5b0c00 +size 80880 diff --git a/images/Shaft_04059.png b/images/Shaft_04059.png new file mode 100644 index 0000000000000000000000000000000000000000..b069aa08296aabfd022de63b39c4de32576d50d0 --- /dev/null +++ b/images/Shaft_04059.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0544e93ad37d3408dc3e7af89d044daa660e921967156a3a30286c85de5776f6 +size 112867 diff --git a/images/Shaft_04060.png b/images/Shaft_04060.png new file mode 100644 index 0000000000000000000000000000000000000000..189e7f3886a63c957c2bbab096db283d1f749526 --- /dev/null +++ b/images/Shaft_04060.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:590945a5dd4e9bc484349b857fc9bf1455fe513f4954b07b211367a716c5806c +size 104592 diff --git a/images/Shaft_04061.png b/images/Shaft_04061.png new file mode 100644 index 0000000000000000000000000000000000000000..4db455a1bfda5251ae8fbbf1f1a3d4f9a3b8355b --- /dev/null +++ b/images/Shaft_04061.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb0a68f0d2efe6a014e303153e004bb8ab1cf5d6ea034ba2bc5bd24be471d31f +size 67296 diff --git a/images/Shaft_04062.png b/images/Shaft_04062.png new file mode 100644 index 0000000000000000000000000000000000000000..4dbabe9aab5da81aa71687336095616eaeec544e --- /dev/null +++ b/images/Shaft_04062.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5162f4b9d015ff1df9191931ceeccbd2667e87e8a1db0b61cf70e505bb6ac511 +size 80390 diff --git a/images/Shaft_04063.png b/images/Shaft_04063.png new file mode 100644 index 0000000000000000000000000000000000000000..78338cb652e39fb6d17237f26e50474be291b1f0 --- /dev/null +++ b/images/Shaft_04063.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22d169b5fa5f23d3feeab34b1bcabeb26aeb3f0a9ff85759461b4573337b1872 +size 76063 diff --git a/images/Shaft_04064.png b/images/Shaft_04064.png new file mode 100644 index 0000000000000000000000000000000000000000..9cdc801ba02c7e868db68292cd4ae5375a8ad2d0 --- /dev/null +++ b/images/Shaft_04064.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c74b33bf16f616d82e30d2700e85b80e1328ed2f90e01a5c75e8bbdb90b4c13e +size 80585 diff --git a/images/Shaft_04065.png b/images/Shaft_04065.png new file mode 100644 index 0000000000000000000000000000000000000000..fe90f781e9b0548a326b3913909a68fba3ddbcde --- /dev/null +++ b/images/Shaft_04065.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dd687c4ede69bf421822e64e9651df81324466c010fe5bd872da466dcd96886d +size 72164 diff --git a/images/Shaft_04066.png b/images/Shaft_04066.png new file mode 100644 index 0000000000000000000000000000000000000000..0fb2229600aa73041ce8680f02b40fbb94108d39 --- /dev/null +++ b/images/Shaft_04066.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43353ca0f88b76c7c6ad8e44d7442fab997adfedb9948035b4c090e84b72d149 +size 92832 diff --git a/images/Shaft_04067.png b/images/Shaft_04067.png new file mode 100644 index 0000000000000000000000000000000000000000..ae6e68fafc59f387e756e1bf005f8a6be48490be --- /dev/null +++ b/images/Shaft_04067.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac8d662fe868c73196ef342b8648b6bd32f7538c447af1a64d7d9ef28d1454b2 +size 88318 diff --git a/images/Shaft_04068.png b/images/Shaft_04068.png new file mode 100644 index 0000000000000000000000000000000000000000..048f97d395b36f6f4aa3f4298dfdecf5adaae897 --- /dev/null +++ b/images/Shaft_04068.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fac01fd11f9ef475f13d89f85d1bd9f32df55dc6d2b28d1d381b1449b79ca01a +size 73837 diff --git a/images/Shaft_04069.png b/images/Shaft_04069.png new file mode 100644 index 0000000000000000000000000000000000000000..29c60aaf153625945cb0c7506b80efed09476129 --- /dev/null +++ b/images/Shaft_04069.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22677a6f3514428136406d757aa08d6de8ddca69732ed34e4b9aaab438ef3d15 +size 81331 diff --git a/images/Shaft_04070.png b/images/Shaft_04070.png new file mode 100644 index 0000000000000000000000000000000000000000..4acbf52bc5fae153acac5d4e1c2c5d5b2e8fac80 --- /dev/null +++ b/images/Shaft_04070.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cbd81de6d12364bc367c08795ebf185ca70c5a2c5fb174e6709e651eedc1bc2 +size 88699 diff --git a/images/Shaft_04071.png b/images/Shaft_04071.png new file mode 100644 index 0000000000000000000000000000000000000000..f8c3b8883d3103b6e630dcca027e072a0170f389 --- /dev/null +++ b/images/Shaft_04071.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f483bc5fe7e0acd04fc602efd2ea1a7f107e554cf3f4c3d4aa4a68866bf00430 +size 82920 diff --git a/images/Shaft_04072.png b/images/Shaft_04072.png new file mode 100644 index 0000000000000000000000000000000000000000..9b57d86f623b327eaf7a4654b3aae6e3578a3cb8 --- /dev/null +++ b/images/Shaft_04072.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcb625f9c66a6607ead1a631500df6a9a1aa640d149004e116ba52ff8b041916 +size 83208 diff --git a/images/Shaft_04073.png b/images/Shaft_04073.png new file mode 100644 index 0000000000000000000000000000000000000000..32a49537bb30c64c07dc962c92f3be019f954a9a --- /dev/null +++ b/images/Shaft_04073.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9b84312ae603d320bc00f8a488f03467e8e854d0e7a23f02dea7e22b00d075f +size 87963 diff --git a/images/Shaft_04074.png b/images/Shaft_04074.png new file mode 100644 index 0000000000000000000000000000000000000000..879f641f41548ace7b6f2275a2a5b8d94a329f44 --- /dev/null +++ b/images/Shaft_04074.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1722282a9a6da40afcdee737cbb29c7fa1cded099781ab991931397b5e52ada +size 98202 diff --git a/images/Shaft_04075.png b/images/Shaft_04075.png new file mode 100644 index 0000000000000000000000000000000000000000..1f31de6bae112f61de238880cd950922f7f19446 --- /dev/null +++ b/images/Shaft_04075.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43ce703b078006dca09a2f0d15a7f2026c68631609be814345b349b88f1944fa +size 84100 diff --git a/images/Shaft_04076.png b/images/Shaft_04076.png new file mode 100644 index 0000000000000000000000000000000000000000..e4fd276f37ae8f4a843b5cd282955955756d010a --- /dev/null +++ b/images/Shaft_04076.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe15188f18dd2e77c22fa93bdc48f53acc9d2446ab9ad3a875fce050d2fa9d5d +size 83694 diff --git a/images/Shaft_04077.png b/images/Shaft_04077.png new file mode 100644 index 0000000000000000000000000000000000000000..8bfa21acfc8e3c2487a9a02d1b90d1d22164bca3 --- /dev/null +++ b/images/Shaft_04077.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b93dabd1d32be6f4eb77eb20a80a4131ea515a0776b9f256cc517fe09c5ee3bb +size 102541 diff --git a/images/Shaft_04078.png b/images/Shaft_04078.png new file mode 100644 index 0000000000000000000000000000000000000000..f15c770861f8ed29d898f9a9224878c4a1c20840 --- /dev/null +++ b/images/Shaft_04078.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22c628eb47e9882926e0dc84576d591e44ec99efcdcc69949875dc80cbbc0844 +size 80568 diff --git a/images/Shaft_04079.png b/images/Shaft_04079.png new file mode 100644 index 0000000000000000000000000000000000000000..bc7e367e9c29b18779d6b9c39cc9bb03071a8373 --- /dev/null +++ b/images/Shaft_04079.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1acb55c56241e5bf6ea13187eb134fa9fe3bbd92b22c0762fa3e482cc4470f6b +size 96879 diff --git a/images/Shaft_04080.png b/images/Shaft_04080.png new file mode 100644 index 0000000000000000000000000000000000000000..017b3b6613129cac4ce521ff51ba6668f51b8f27 --- /dev/null +++ b/images/Shaft_04080.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d31fdb13f4370de3ece72109d294fb0de66ff9d52331956500bd789f2fa1cd9e +size 70660 diff --git a/images/Shaft_04081.png b/images/Shaft_04081.png new file mode 100644 index 0000000000000000000000000000000000000000..41deea5ed8c38127e450b0ad4a640e324745ebdb --- /dev/null +++ b/images/Shaft_04081.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7142b851e1175bc9e2b72f9e1bc4bd48958e58fd9577518ce3f5dbec106e96eb +size 99516 diff --git a/images/Shaft_04082.png b/images/Shaft_04082.png new file mode 100644 index 0000000000000000000000000000000000000000..488dc708034f6e067a3bfae6e15c87688c4bf037 --- /dev/null +++ b/images/Shaft_04082.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de963ddb8c2db6016c74e05a2aaf4fb6464421f079ffce259bf7af8175be2c12 +size 84591 diff --git a/images/Shaft_04083.png b/images/Shaft_04083.png new file mode 100644 index 0000000000000000000000000000000000000000..26a18d1945600af2d255b8ba625c8357bff9165f --- /dev/null +++ b/images/Shaft_04083.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:733920ae12812cfb57df3d8e403f2ecda463b27963aaf8166bd7e6ba59418978 +size 85804 diff --git a/images/Shaft_04084.png b/images/Shaft_04084.png new file mode 100644 index 0000000000000000000000000000000000000000..de9b235a280ca9d4f98739f9676dde1861cdeae1 --- /dev/null +++ b/images/Shaft_04084.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b5d82c7012e0cccc0d419bbd9dd2a776fa4b71a6475279e6842449cd26950c5 +size 78164 diff --git a/images/Shaft_04085.png b/images/Shaft_04085.png new file mode 100644 index 0000000000000000000000000000000000000000..58c1c3c54b35d11c6da1c0dba4c0de1e2aa625fc --- /dev/null +++ b/images/Shaft_04085.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eec5012a64000b4adffe31f50ba125fdde4049262e06f276cba03bffb2b5a119 +size 94363 diff --git a/images/Shaft_04086.png b/images/Shaft_04086.png new file mode 100644 index 0000000000000000000000000000000000000000..e8e847a999ce3efa9f5a6701e8bb24ce312de35d --- /dev/null +++ b/images/Shaft_04086.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2ae7724de22916b03dd845823c748ca6e2a3c8d462bfed3ba9ed0cbc6ca23dbc +size 70422 diff --git a/images/Shaft_04087.png b/images/Shaft_04087.png new file mode 100644 index 0000000000000000000000000000000000000000..a82ee8befd273be02d7a6c70040ae25db364e30d --- /dev/null +++ b/images/Shaft_04087.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ffc1df843807c71ed5bb1f010faf0e9023f13fba7104affa58112d27f3a916a +size 95524 diff --git a/images/Shaft_04088.png b/images/Shaft_04088.png new file mode 100644 index 0000000000000000000000000000000000000000..5e05cd0cc6aa64fa13281ba0e9f143a0f7459da1 --- /dev/null +++ b/images/Shaft_04088.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b32df5ab5e13b11e1b8ead4de755d33eb0ac13b1947762ac084d66f79ca01c4b +size 77400 diff --git a/images/Shaft_04089.png b/images/Shaft_04089.png new file mode 100644 index 0000000000000000000000000000000000000000..6c4e6f6c4390082d7148e6384afb50cfaa2c77c2 --- /dev/null +++ b/images/Shaft_04089.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c6d77adf1aaae8088d1426b2a94b1205a468b575710450e591ac2f6b9bb4feb +size 99694 diff --git a/images/Shaft_04090.png b/images/Shaft_04090.png new file mode 100644 index 0000000000000000000000000000000000000000..9d5994a45d031bbd3b0df7c561e421e34c9ccb46 --- /dev/null +++ b/images/Shaft_04090.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9fa8ee64ea681177593cd8d6710f7c1d18641cb77adc9b955c8e6633e9748dc3 +size 75361 diff --git a/images/Shaft_04091.png b/images/Shaft_04091.png new file mode 100644 index 0000000000000000000000000000000000000000..47265c3bb3cfe5113e7db58d4435faefe9539ff4 --- /dev/null +++ b/images/Shaft_04091.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6438de1b494f15b93880685cf31c4c2e4c115dd2492711ae30bd1e849bbe64ad +size 81463 diff --git a/images/Shaft_04092.png b/images/Shaft_04092.png new file mode 100644 index 0000000000000000000000000000000000000000..b702720137ddd54a3a005e54bdca8b920a056029 --- /dev/null +++ b/images/Shaft_04092.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15a200960e53ede3a33fbdab5434ae5dc1038aad9e43924429361d5fe9623287 +size 73535 diff --git a/images/Shaft_04093.png b/images/Shaft_04093.png new file mode 100644 index 0000000000000000000000000000000000000000..c8c0d4f00f9ebac0d0faf0ff5fae60f45a223465 --- /dev/null +++ b/images/Shaft_04093.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae39ebea35c8b9d06244cd88e5745800c1556774d57bd18662efb4a052824295 +size 86162 diff --git a/images/Shaft_04094.png b/images/Shaft_04094.png new file mode 100644 index 0000000000000000000000000000000000000000..4522c2f10e5ad0e9e220afde407758f91624ce80 --- /dev/null +++ b/images/Shaft_04094.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c004ce915691ae7e20597ec638dcc3fdd866dbba1ed3de9393820d79a63bf05 +size 98574 diff --git a/images/Shaft_04095.png b/images/Shaft_04095.png new file mode 100644 index 0000000000000000000000000000000000000000..319242bd85ced76e35bb6d9fde135d7fc0ad0fb8 --- /dev/null +++ b/images/Shaft_04095.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afaf8f131e638246358b52f80aca779aec9cd0a5886058b6db5620b715467008 +size 112563 diff --git a/images/Shaft_04096.png b/images/Shaft_04096.png new file mode 100644 index 0000000000000000000000000000000000000000..70407de8fa286872948b0148c22565a556b7b114 --- /dev/null +++ b/images/Shaft_04096.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc491e10cd9aad5349ae2b64b9a140151a0d248b603d7f3b8ab67bf37be975ca +size 77201 diff --git a/images/Shaft_04097.png b/images/Shaft_04097.png new file mode 100644 index 0000000000000000000000000000000000000000..56b85b2e6b59e47e0e3684cb31dcc00b1484723f --- /dev/null +++ b/images/Shaft_04097.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2fc84b67dc727d1b974a6d122d46de14f8dea216008a11737cffd8540795865a +size 111282 diff --git a/images/Shaft_04098.png b/images/Shaft_04098.png new file mode 100644 index 0000000000000000000000000000000000000000..4ef4134cc9997a85712d8ea304e43924113977a0 --- /dev/null +++ b/images/Shaft_04098.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc26627a92485a54fab0c52f18842bbea100c5491327bd2aa6faf75cc43f5279 +size 72915 diff --git a/images/Shaft_04099.png b/images/Shaft_04099.png new file mode 100644 index 0000000000000000000000000000000000000000..c419d825c6785ecef2ef147f0c30e89d6d54b481 --- /dev/null +++ b/images/Shaft_04099.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22bdcd35c3d3881129acd27e8ed14a9692f9c8abfbb23e908ea2d71e0e6767d8 +size 83286 diff --git a/images/Shaft_04100.png b/images/Shaft_04100.png new file mode 100644 index 0000000000000000000000000000000000000000..71c96588de46407ecfd5d4f88706ab83ddde8fc3 --- /dev/null +++ b/images/Shaft_04100.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5f48345a898ff3daf0269a9b972f51c469b8547f0936081362e373f71a28d386 +size 70218 diff --git a/images/Shaft_04101.png b/images/Shaft_04101.png new file mode 100644 index 0000000000000000000000000000000000000000..625b0e19e64caacc573d25ea958c9ff04763f848 --- /dev/null +++ b/images/Shaft_04101.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba935f78b4133211f5e7602ae3024b7591d5908346f82fcb18248eb93ea021b2 +size 80007 diff --git a/images/Shaft_04102.png b/images/Shaft_04102.png new file mode 100644 index 0000000000000000000000000000000000000000..1fa33ab006e1fc3b7d1cf166de860225cbc21f52 --- /dev/null +++ b/images/Shaft_04102.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:902c84d519d08d53845d1553296cc83ba4026da80f1a5fc69aade0a9fb3be6a0 +size 97509 diff --git a/images/Shaft_04103.png b/images/Shaft_04103.png new file mode 100644 index 0000000000000000000000000000000000000000..9e1008724c30d18688836ddd74f32d9467317a58 --- /dev/null +++ b/images/Shaft_04103.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5162b57a86c140707da9fd3821efd05fbbaa7cfbf8c64b914a050b82436a2bcc +size 69549 diff --git a/images/Shaft_04104.png b/images/Shaft_04104.png new file mode 100644 index 0000000000000000000000000000000000000000..a2a054e929a7f08794281923a06795b28df9f5c9 --- /dev/null +++ b/images/Shaft_04104.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cb6123932223a9554cc4d7ffbe675cde4c1543a5512ebacbc0387e4895fd591 +size 94494 diff --git a/images/Shaft_04105.png b/images/Shaft_04105.png new file mode 100644 index 0000000000000000000000000000000000000000..776b3a819ed325a6724f8ff7fac5fb210849d7d8 --- /dev/null +++ b/images/Shaft_04105.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eec032b6a3048f7727498a51ea80f4001a56ded53d70b548d52024adf240f598 +size 99337 diff --git a/images/Shaft_04106.png b/images/Shaft_04106.png new file mode 100644 index 0000000000000000000000000000000000000000..9b9e718d770b6699910cf2cca90fcc36b5ed0649 --- /dev/null +++ b/images/Shaft_04106.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1441049ec5b59446d6de89f3f1b0b921d744292c4fb1ba755435987dc217ef2 +size 78693 diff --git a/images/Shaft_04107.png b/images/Shaft_04107.png new file mode 100644 index 0000000000000000000000000000000000000000..20215d8ca6816ca0fc996f31b2bd03f5a3d08a3a --- /dev/null +++ b/images/Shaft_04107.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c9aa4d70377800345f89931addf470fb9a1662377caf535b8dc7d28f50e73cf4 +size 77351 diff --git a/images/Shaft_04108.png b/images/Shaft_04108.png new file mode 100644 index 0000000000000000000000000000000000000000..f651c7f4ca088ec7b077305cc4a6196a249c54fb --- /dev/null +++ b/images/Shaft_04108.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a181d9f2f0b790bb3dbcd4635d9b994aeadfb8e32f89d699c5f84263ec4349f0 +size 100288 diff --git a/images/Shaft_04109.png b/images/Shaft_04109.png new file mode 100644 index 0000000000000000000000000000000000000000..e91ffda306446e21f6858da9b36552bcafe437ac --- /dev/null +++ b/images/Shaft_04109.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74de74afc834e6988264a3332c2d616d0fe68b3e1c890dc38c66a48d55a61ed5 +size 83083 diff --git a/images/Shaft_04110.png b/images/Shaft_04110.png new file mode 100644 index 0000000000000000000000000000000000000000..490653f8c4bacb731c16bad7eb81a92e1d86cf6f --- /dev/null +++ b/images/Shaft_04110.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bb42c7b38869fa3508982a82eafab88e07a29703114ce2fdcf2a32d42fbdfb3 +size 78933 diff --git a/images/Shaft_04111.png b/images/Shaft_04111.png new file mode 100644 index 0000000000000000000000000000000000000000..36ca7e930da7cb592ba781b10bb163a865629091 --- /dev/null +++ b/images/Shaft_04111.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70b358341371b1aefcc4e8ff3282302271bb9d3d2902b160c6851589f50825b1 +size 88336 diff --git a/images/Shaft_04112.png b/images/Shaft_04112.png new file mode 100644 index 0000000000000000000000000000000000000000..f1eea3ce8f2cfa1920434b5ceb9ae5735927b314 --- /dev/null +++ b/images/Shaft_04112.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca03bb3924dfcca433bb39a0a87391f457cc11925748916af3d6a07f4cfe13c9 +size 90409 diff --git a/images/Shaft_04113.png b/images/Shaft_04113.png new file mode 100644 index 0000000000000000000000000000000000000000..8ce177abfc0438dee182c262fb8910dc57d2ee68 --- /dev/null +++ b/images/Shaft_04113.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e859a74c9c1dba42898dfc953744cee15d1c290f3311bfeefcd3b631cd26e87c +size 68803 diff --git a/images/Shaft_04114.png b/images/Shaft_04114.png new file mode 100644 index 0000000000000000000000000000000000000000..e54d442112a4ba8a4394d775b2b9da403c79637c --- /dev/null +++ b/images/Shaft_04114.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:192d716fe4418c987a34093a8e5bf2ce4111170fad4d4e06b93fc9072d43d1fc +size 84900 diff --git a/images/Shaft_04115.png b/images/Shaft_04115.png new file mode 100644 index 0000000000000000000000000000000000000000..3b036d15f1148ab6f1083720e7881bc6f8e215d5 --- /dev/null +++ b/images/Shaft_04115.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a611820cd49649fe1a5d6ab7a241a10a82161ca0dbbed1c06e374fbdf9c26a33 +size 84943 diff --git a/images/Shaft_04116.png b/images/Shaft_04116.png new file mode 100644 index 0000000000000000000000000000000000000000..184a90ca840c5038f1098cf6f00965ae6e8e317b --- /dev/null +++ b/images/Shaft_04116.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a91fc949c83a83cb578b389f57ca1d2eebb236456ff41aa86801aebbd7ffb75d +size 87340 diff --git a/images/Shaft_04117.png b/images/Shaft_04117.png new file mode 100644 index 0000000000000000000000000000000000000000..15dec1d5ce37dc161c5d90586ac8541be47f622f --- /dev/null +++ b/images/Shaft_04117.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:223ed69ace9df4ecc8088ea29fc56094df0ff9b5dc0f14458dfefc1fb24e644c +size 73812 diff --git a/images/Shaft_04118.png b/images/Shaft_04118.png new file mode 100644 index 0000000000000000000000000000000000000000..8ea2a8f6b02056a5218dc233442400e5c8fd779e --- /dev/null +++ b/images/Shaft_04118.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:444821d5bafd20dee2caa0c7e40d7630660ad8d628f76481652a3dff96254ae7 +size 79363 diff --git a/images/Shaft_04119.png b/images/Shaft_04119.png new file mode 100644 index 0000000000000000000000000000000000000000..201f17ab704fadd4cfb8e57afcdaa920a6cd6e0f --- /dev/null +++ b/images/Shaft_04119.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1ac2be3fea3e1e004a4d4cad9386cd4c1d57c83af4a9319e2e4fcf64ef4138c +size 65703 diff --git a/images/Shaft_04120.png b/images/Shaft_04120.png new file mode 100644 index 0000000000000000000000000000000000000000..af1c495469a18a874bf9fd9566fdeea7f4264277 --- /dev/null +++ b/images/Shaft_04120.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c318e75db47d513e9348f98b5dade8ab50f4f67345486dccc8c61c75f057bb4 +size 81909 diff --git a/images/Shaft_04121.png b/images/Shaft_04121.png new file mode 100644 index 0000000000000000000000000000000000000000..60087bf0e6d82df32f756ec694f26c39dcadeaeb --- /dev/null +++ b/images/Shaft_04121.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3552cf842b8926fea3fd16dac6650b05ce741eb2682dfefb157ba92242e3a58e +size 92184 diff --git a/images/Shaft_04122.png b/images/Shaft_04122.png new file mode 100644 index 0000000000000000000000000000000000000000..7ee610e7856aa6ac80cd8303a359d63345ac8f5c --- /dev/null +++ b/images/Shaft_04122.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:debe548a055d26f781955d1b37c31dadb1768993479571440b9c7d2ce793f20f +size 69145 diff --git a/images/Shaft_04123.png b/images/Shaft_04123.png new file mode 100644 index 0000000000000000000000000000000000000000..13f4bfa398b9d1b15e08e4a449ecfb68bf6e0da9 --- /dev/null +++ b/images/Shaft_04123.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf2d3db6c2ba619c4092c02b868c56f40c03bb27601172651667494b6fc66057 +size 74677 diff --git a/images/Shaft_04124.png b/images/Shaft_04124.png new file mode 100644 index 0000000000000000000000000000000000000000..5d463d742c4de683de56210e2550f25ae40eab00 --- /dev/null +++ b/images/Shaft_04124.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e136a1d3afd7c20a2db87b9a9ed2e1dd79a8fc149e4d8ed5472aac43b6039a4f +size 72578 diff --git a/images/Shaft_04125.png b/images/Shaft_04125.png new file mode 100644 index 0000000000000000000000000000000000000000..a2010f094517329fb658930c75d617447c9663d2 --- /dev/null +++ b/images/Shaft_04125.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46e0cd250f10aff1d6d3e0d13f52c8ab687a7d14f0d696e2f524332769e5e3d2 +size 91007 diff --git a/images/Shaft_04126.png b/images/Shaft_04126.png new file mode 100644 index 0000000000000000000000000000000000000000..38b4a3b2531c40dc53aa46de3022c58bc1d35555 --- /dev/null +++ b/images/Shaft_04126.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fee3a1ed360e36daa802ebeb3595c02569a68fd6bbaa7b1726251b7d6cb72597 +size 78676 diff --git a/images/Shaft_04127.png b/images/Shaft_04127.png new file mode 100644 index 0000000000000000000000000000000000000000..864c9876245912ffc13df6c1af9dbbf214239d37 --- /dev/null +++ b/images/Shaft_04127.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7b24279e309e09898443bb4f9ff7b0e622171cdb31ab51f1cebed0fe74b071a2 +size 81376 diff --git a/images/Shaft_04128.png b/images/Shaft_04128.png new file mode 100644 index 0000000000000000000000000000000000000000..8865be9c7d63dbd200ee3313369ec92def0626ed --- /dev/null +++ b/images/Shaft_04128.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d07743d1d6fe35cbb7fac4ea885bc62340d21635e31100966393de39c1a03c7f +size 93679 diff --git a/images/Shaft_04129.png b/images/Shaft_04129.png new file mode 100644 index 0000000000000000000000000000000000000000..e45af88b527c7d1f3008d075160fdbef9e67086f --- /dev/null +++ b/images/Shaft_04129.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5ce3b9269d1f3b38190725fc0af5b2de38a5c449ae8cd7600fb4dde6e952161 +size 91397 diff --git a/images/Shaft_04130.png b/images/Shaft_04130.png new file mode 100644 index 0000000000000000000000000000000000000000..f75bc3cb9349b60cd22985f4b1f5d1248b30b841 --- /dev/null +++ b/images/Shaft_04130.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:587f401b7ff5bbbaa790a9f9abf86ff4a1a8cd384569ada27e32d3a439aa6821 +size 71908 diff --git a/images/Shaft_04131.png b/images/Shaft_04131.png new file mode 100644 index 0000000000000000000000000000000000000000..15ef281daf13ee482dfba6a6fc19efc9a48456a5 --- /dev/null +++ b/images/Shaft_04131.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5509713aff32648f1a79ce3983d8844590353421fe11378e05fdfa9f7a750520 +size 70574 diff --git a/images/Shaft_04132.png b/images/Shaft_04132.png new file mode 100644 index 0000000000000000000000000000000000000000..5269cc6444d9cbfea09f4c00677cafdd881ef371 --- /dev/null +++ b/images/Shaft_04132.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:debb78c878feebbf95341e68fc887c8ae217738c58eb2d954282bbbb692ba76f +size 82359 diff --git a/images/Shaft_04133.png b/images/Shaft_04133.png new file mode 100644 index 0000000000000000000000000000000000000000..c6d16b737c93360c36f91e0206e496f907d941d6 --- /dev/null +++ b/images/Shaft_04133.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb5822aaeaffe444b76203be72e4ba29693f587aa1b703b7a598143c4005e2e8 +size 72710 diff --git a/images/Shaft_04134.png b/images/Shaft_04134.png new file mode 100644 index 0000000000000000000000000000000000000000..5b84e3766c98ca06ba938a2c5d0be8740b0ca941 --- /dev/null +++ b/images/Shaft_04134.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c6f711ebd891962ca2edaeb6c2d587f8d96953e5eb5b8f7c0cb78214f9e3217 +size 69579 diff --git a/images/Shaft_04135.png b/images/Shaft_04135.png new file mode 100644 index 0000000000000000000000000000000000000000..48b7bf68271e22f64626f33c8399d8298283cc4f --- /dev/null +++ b/images/Shaft_04135.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf7839219b31a3d4d0556bae9d346ba605eb2f804dd28700357e9b95fa1a9930 +size 88720 diff --git a/images/Shaft_04136.png b/images/Shaft_04136.png new file mode 100644 index 0000000000000000000000000000000000000000..51e3c5edd766ae03adb74e2e13397653a1b4dd68 --- /dev/null +++ b/images/Shaft_04136.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93aa2772af561e0e670184c60d2c9eec2329a5e477aa15830d448c56a2f18fe0 +size 66618 diff --git a/images/Shaft_04137.png b/images/Shaft_04137.png new file mode 100644 index 0000000000000000000000000000000000000000..15fcf0cf9532821bec239ccd3a9034e4c7b6a648 --- /dev/null +++ b/images/Shaft_04137.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5ee010ec2d8ba23dc2c31d83aefebe446919cd78cca0ba08df18bc512188a48 +size 85583 diff --git a/images/Shaft_04138.png b/images/Shaft_04138.png new file mode 100644 index 0000000000000000000000000000000000000000..dcfdf2adf2f502aca9fd2657a5db1f2f60206342 --- /dev/null +++ b/images/Shaft_04138.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d61155ae6824d2e2b7589afdfa866e27595e120fe157276a66bfb5f32f346838 +size 69131 diff --git a/images/Shaft_04139.png b/images/Shaft_04139.png new file mode 100644 index 0000000000000000000000000000000000000000..20ae053ddfb20b3405f1f51411ded112aed93d55 --- /dev/null +++ b/images/Shaft_04139.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0c0edf9f253ed371149d5734cf699cc76b557204678bfea48f846a7d3c85a3d +size 92411 diff --git a/images/Shaft_04140.png b/images/Shaft_04140.png new file mode 100644 index 0000000000000000000000000000000000000000..3710d6c36ea2288bf743b77417e2a35189d089d3 --- /dev/null +++ b/images/Shaft_04140.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89dc794baf0690ba2c58d93d1a00ffabd9f216bf8206e656fc1c5e12ff481b23 +size 101542 diff --git a/images/Shaft_04141.png b/images/Shaft_04141.png new file mode 100644 index 0000000000000000000000000000000000000000..ebde93e6e929d2e5ef38defb004f9f37af5e24c9 --- /dev/null +++ b/images/Shaft_04141.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74e442252306efafe6edbc77ed1b54bfdbac8ffa8509521a65bfb7b9f75a2262 +size 84898 diff --git a/images/Shaft_04142.png b/images/Shaft_04142.png new file mode 100644 index 0000000000000000000000000000000000000000..99e0bc9428d4e4a46e765ad3647c5050de6bf5ef --- /dev/null +++ b/images/Shaft_04142.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4505198523af6198c0d099af8b87759fe943b3036cc1e4ce01160aa1ef89c795 +size 77859 diff --git a/images/Shaft_04143.png b/images/Shaft_04143.png new file mode 100644 index 0000000000000000000000000000000000000000..d0ccd57f0510e200c4cc6508e03f51c4b84ca118 --- /dev/null +++ b/images/Shaft_04143.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8d9d8ff051bf12f1fb35cba4bf809428dcf4473c0ed32311fdc6177cb654659b +size 93107 diff --git a/images/Shaft_04144.png b/images/Shaft_04144.png new file mode 100644 index 0000000000000000000000000000000000000000..c8525ec0a8c3fd8d1097be5ad5abba044b76cfa6 --- /dev/null +++ b/images/Shaft_04144.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ac477e9814e63d3e53b47180e352077629cc4680943addcf403df4af1333009 +size 64823 diff --git a/images/Shaft_04145.png b/images/Shaft_04145.png new file mode 100644 index 0000000000000000000000000000000000000000..5af9238a57b56520ca06dbc6424b89f2f3dfc453 --- /dev/null +++ b/images/Shaft_04145.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88e559c4ecdadc95171ae9ed2de18049556acd6d1833ec76b31547d80191fb8a +size 83506 diff --git a/images/Shaft_04146.png b/images/Shaft_04146.png new file mode 100644 index 0000000000000000000000000000000000000000..838ac453b3a602eb727866e0fc405a5a1aa5283c --- /dev/null +++ b/images/Shaft_04146.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bac55a3b1ae51b75740c0b72e482f65af6debf64af7f116c598d20f1e0bfb147 +size 108432 diff --git a/images/Shaft_04147.png b/images/Shaft_04147.png new file mode 100644 index 0000000000000000000000000000000000000000..66bbf5b15073ad726c3bf33abb065b7ea6cbbdb9 --- /dev/null +++ b/images/Shaft_04147.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cc8f26c9593f6846e1d3c58d65c101216656110f1b490aa3a6f8f8ccd303f69 +size 95959 diff --git a/images/Shaft_04148.png b/images/Shaft_04148.png new file mode 100644 index 0000000000000000000000000000000000000000..bdcbfa1619c833dd11c4d19bfa41b79865862e60 --- /dev/null +++ b/images/Shaft_04148.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11ba0eecb30666280ce44f8f974b0e0d0f41eb9ac4b1ba69894e6f1b71181f85 +size 88431 diff --git a/images/Shaft_04149.png b/images/Shaft_04149.png new file mode 100644 index 0000000000000000000000000000000000000000..706a0c21e08396630eb079681d0fedc16dc278db --- /dev/null +++ b/images/Shaft_04149.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b095b94eca4b4322933e6fda79630433712b4225ee49b53ac9622beed2f04dc +size 81609 diff --git a/images/Shaft_04150.png b/images/Shaft_04150.png new file mode 100644 index 0000000000000000000000000000000000000000..05237622617aa41c02813ad84f0181277338b758 --- /dev/null +++ b/images/Shaft_04150.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:117c2b06581e768d8381d680438a14d1ecfc8ab7cb0c9af5d18089a968a0fffe +size 67719 diff --git a/images/Shaft_04151.png b/images/Shaft_04151.png new file mode 100644 index 0000000000000000000000000000000000000000..33c37a3d96a6baaf039e5d6ab8e00fc5bd7197bf --- /dev/null +++ b/images/Shaft_04151.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ec6e64a7f8236689eb691262cac59edb5c446f27057558151acfd182b451a64 +size 68697 diff --git a/images/Shaft_04152.png b/images/Shaft_04152.png new file mode 100644 index 0000000000000000000000000000000000000000..29250e7fcb2bf69a22a056d6442390eafe1e3844 --- /dev/null +++ b/images/Shaft_04152.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f751fe6184117f08f2fcb2b431174dabbf57f3b962dddf52cee8c404dfe0ca46 +size 98867 diff --git a/images/Shaft_04153.png b/images/Shaft_04153.png new file mode 100644 index 0000000000000000000000000000000000000000..2d63b9dc72bda9168e15ad231e9eb9c4a7fe41e3 --- /dev/null +++ b/images/Shaft_04153.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39ef5a443f157d1a469db2f6f7110c814460f56c499e41f43a439f15d201f000 +size 83303 diff --git a/images/Shaft_04154.png b/images/Shaft_04154.png new file mode 100644 index 0000000000000000000000000000000000000000..7d739122886e39ef4281757555588f9fdab1e71c --- /dev/null +++ b/images/Shaft_04154.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c9f12cf559f3823702e61a0b3913b437d4b0cb4d4a3613742682c9f3e22fa28 +size 106051 diff --git a/images/Shaft_04155.png b/images/Shaft_04155.png new file mode 100644 index 0000000000000000000000000000000000000000..01e3baaa7710d414deba52cf1fb1b719283701f3 --- /dev/null +++ b/images/Shaft_04155.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e2240b4d19c5c33e1dd4003f1840249efa02780cfdae008b5020b6675bfca20 +size 74054 diff --git a/images/Shaft_04156.png b/images/Shaft_04156.png new file mode 100644 index 0000000000000000000000000000000000000000..84d84fc799747fbe4e56ac8f17493770cc7160e9 --- /dev/null +++ b/images/Shaft_04156.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a0c9f4025fcb3d570be219b88a7fc48f2f4f5afb1c505f70786915b30a99ad3 +size 70341 diff --git a/images/Shaft_04157.png b/images/Shaft_04157.png new file mode 100644 index 0000000000000000000000000000000000000000..2b786d676bb3ce3d522c91ab2e785dcd1edecaae --- /dev/null +++ b/images/Shaft_04157.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e4233b25df57930e0398ecf3aa11b566fd6108ef3d42e218434e816c005c892 +size 68784 diff --git a/images/Shaft_04158.png b/images/Shaft_04158.png new file mode 100644 index 0000000000000000000000000000000000000000..a01a3305f5146d1406ce85b411b7ad737e8039ec --- /dev/null +++ b/images/Shaft_04158.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73506a4eb1924ee5d1c8d3a02a254cc94b0f2999fbd549029d39cad96ab1d211 +size 73539 diff --git a/images/Shaft_04159.png b/images/Shaft_04159.png new file mode 100644 index 0000000000000000000000000000000000000000..6e1f5069a247d873e520a62f547aa4031ec0e67e --- /dev/null +++ b/images/Shaft_04159.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffe8a062b1fd1c3c38b243e05879619bd336e7c99d0582fd9e6e70a9802cb0d2 +size 74422 diff --git a/images/Shaft_04160.png b/images/Shaft_04160.png new file mode 100644 index 0000000000000000000000000000000000000000..4310a8c5dac381df48554108ac39749245511c91 --- /dev/null +++ b/images/Shaft_04160.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72ac0c4616d5161d3ae2df6b677e6cd179131db1f8b53c41368251061f48bd30 +size 97475 diff --git a/images/Shaft_04161.png b/images/Shaft_04161.png new file mode 100644 index 0000000000000000000000000000000000000000..d5697a0bf2943cc442688b7a9ce2548fb388933b --- /dev/null +++ b/images/Shaft_04161.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f7947bda36e710e603853a8de6ab56c1566e24f565af7a7e2acc222d55c649b +size 75018 diff --git a/images/Shaft_04162.png b/images/Shaft_04162.png new file mode 100644 index 0000000000000000000000000000000000000000..6b6452cd6a574a3f0a3aa032d13ddfa4d3daaf04 --- /dev/null +++ b/images/Shaft_04162.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4974362c2f5922e3eb08ba1f0699418aece2e03f1d157c0a592821b7de547fda +size 88399 diff --git a/images/Shaft_04163.png b/images/Shaft_04163.png new file mode 100644 index 0000000000000000000000000000000000000000..f3413eb27253f28d898f59ac78a60cb47dfc22e0 --- /dev/null +++ b/images/Shaft_04163.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b01b8738fffabe3bbd676c6854615433ff425754d81d86f93be9f84f5d19d41f +size 69928 diff --git a/images/Shaft_04164.png b/images/Shaft_04164.png new file mode 100644 index 0000000000000000000000000000000000000000..e1bab172f6bd5f8f85abc9daacd96a26154c386e --- /dev/null +++ b/images/Shaft_04164.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55e8affdc676b2252dae742c31a9cc749608834302b28846fb8508014da56622 +size 101777 diff --git a/images/Shaft_04165.png b/images/Shaft_04165.png new file mode 100644 index 0000000000000000000000000000000000000000..9806c5302b4f366427666e87ff121e684a64c1f9 --- /dev/null +++ b/images/Shaft_04165.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02520871a850f69bbff65b90416f6f479c80c2539514bf339d47cbe226108659 +size 80912 diff --git a/images/Shaft_04166.png b/images/Shaft_04166.png new file mode 100644 index 0000000000000000000000000000000000000000..9f1196716f9f63b0f8fa35205da5b1313e6ff20d --- /dev/null +++ b/images/Shaft_04166.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c4c33f5e58bc08410324d6ec8617294ba65683191e8fbb71b6cc5944e819a4f +size 107598 diff --git a/images/Shaft_04167.png b/images/Shaft_04167.png new file mode 100644 index 0000000000000000000000000000000000000000..6a7018b9b9114cbff6e28eec86a19e20c76716da --- /dev/null +++ b/images/Shaft_04167.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dcadbcca7d29012fe77706fc10a21b9180298d92dc0059aab5f383ac2b8a4812 +size 71130 diff --git a/images/Shaft_04168.png b/images/Shaft_04168.png new file mode 100644 index 0000000000000000000000000000000000000000..3ba11c675e66ad7f77fa925c3c634cf2736dfbf6 --- /dev/null +++ b/images/Shaft_04168.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5419cdaf0020f32b9f0b6511b6626a8699c3649ea03df407f239a3cf18367e38 +size 94886 diff --git a/images/Shaft_04169.png b/images/Shaft_04169.png new file mode 100644 index 0000000000000000000000000000000000000000..170257c975733b01df09c3263b5a28621ac61084 --- /dev/null +++ b/images/Shaft_04169.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dfadc9bf5c3940fd12a6791f34b9b241898a113506761816cd1e593e3acbedcb +size 83684 diff --git a/images/Shaft_04170.png b/images/Shaft_04170.png new file mode 100644 index 0000000000000000000000000000000000000000..982b41812c831c264b7da018997898a26ecc38c1 --- /dev/null +++ b/images/Shaft_04170.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d5990fd1ff0932fac5236450616249f7cda14352c1a9f824589dafebaa6abb2 +size 72557 diff --git a/images/Shaft_04171.png b/images/Shaft_04171.png new file mode 100644 index 0000000000000000000000000000000000000000..69514456fb056eec320d241e44cd83a21e043131 --- /dev/null +++ b/images/Shaft_04171.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cdf80d7c66d7c081cb5be6be5a3e1adb95bf7faf32feff3fe8a153285c6775d +size 83326 diff --git a/images/Shaft_04172.png b/images/Shaft_04172.png new file mode 100644 index 0000000000000000000000000000000000000000..8e3e40609eb3ecdc922ba0d318b21ef6e329a148 --- /dev/null +++ b/images/Shaft_04172.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:98c8578ee0c13263c19e4be24b4de3e5dc4ee11612a7669ec2f86034843a2563 +size 99011 diff --git a/images/Shaft_04173.png b/images/Shaft_04173.png new file mode 100644 index 0000000000000000000000000000000000000000..124e92a0b5f38dccd4c6f088428cf61b86b97f9b --- /dev/null +++ b/images/Shaft_04173.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6253f48b59c0692e3458783d33951202c7641c87ab508cd7d9a82ae3757afd5e +size 70835 diff --git a/images/Shaft_04174.png b/images/Shaft_04174.png new file mode 100644 index 0000000000000000000000000000000000000000..a8f25aeb261e46ad6e13f17c88915399824136a5 --- /dev/null +++ b/images/Shaft_04174.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1a01c64ac84bca6581740f493a48c52350fc5ca32c41d630286f0e924e60f97 +size 87451 diff --git a/images/Shaft_04175.png b/images/Shaft_04175.png new file mode 100644 index 0000000000000000000000000000000000000000..cab82405b4196641789f1cbbbfa439585aff11b1 --- /dev/null +++ b/images/Shaft_04175.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27e86a1c769333265e004e2e89ae85e5e0af7c1383173f4cccfa85e78a4f51aa +size 91341 diff --git a/images/Shaft_04176.png b/images/Shaft_04176.png new file mode 100644 index 0000000000000000000000000000000000000000..93f9d43e8b509abc7fc86a8a53d3bedc65e587b1 --- /dev/null +++ b/images/Shaft_04176.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8957136a33e0251e81a5a5dafdcef355c3b7a87a13e8dfec5515f4a4180bd38c +size 69284 diff --git a/images/Shaft_04177.png b/images/Shaft_04177.png new file mode 100644 index 0000000000000000000000000000000000000000..905edf10025f675bca718eeb65f124c33b942354 --- /dev/null +++ b/images/Shaft_04177.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b316906f69dcb7981304496cc8154f9728f69de00ff0f622bbdd4f74df1791c9 +size 78338 diff --git a/images/Shaft_04178.png b/images/Shaft_04178.png new file mode 100644 index 0000000000000000000000000000000000000000..61815b5202ae81945308ae6de62adb1993770e2e --- /dev/null +++ b/images/Shaft_04178.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b26f1fede4b394580592288700c9f230db890d7cee28c5cf39aa3ca795ead131 +size 82219 diff --git a/images/Shaft_04179.png b/images/Shaft_04179.png new file mode 100644 index 0000000000000000000000000000000000000000..1b8e774615c16e6b32d237054c212dd5423291f6 --- /dev/null +++ b/images/Shaft_04179.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51a1c7fe36595c2b612aa02f7b44670ab5d90688700aed4d372bac5e30321844 +size 90828 diff --git a/images/Shaft_04180.png b/images/Shaft_04180.png new file mode 100644 index 0000000000000000000000000000000000000000..b592c973621ecaf89f7ad70fac0526032fac12a4 --- /dev/null +++ b/images/Shaft_04180.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:067629708f5339f2c14fc3c9e3d00e8ad03ba5857d1cd0ddadcb82ada83dc77d +size 90297 diff --git a/images/Shaft_04181.png b/images/Shaft_04181.png new file mode 100644 index 0000000000000000000000000000000000000000..35cc9b361d1c2045379418e803f1563e02133587 --- /dev/null +++ b/images/Shaft_04181.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a79aaa10c490fdd085abffdd03535e4694a3ce39b69c38a1be0f02cb28b4eeb +size 85311 diff --git a/images/Shaft_04182.png b/images/Shaft_04182.png new file mode 100644 index 0000000000000000000000000000000000000000..05a4045d849b87c22f4143758514ddd296866c1b --- /dev/null +++ b/images/Shaft_04182.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8320b481afca331964f1344d5ecf778afb4b7bc4abce89ba1d6499b72ef9aecb +size 85885 diff --git a/images/Shaft_04183.png b/images/Shaft_04183.png new file mode 100644 index 0000000000000000000000000000000000000000..efee265d89a0e20d495bbd1ba5f1c02fa0f0a798 --- /dev/null +++ b/images/Shaft_04183.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc5604e06c7b5bf9cada853f981674af6ec333e8b441154932df8834d1f41851 +size 87678 diff --git a/images/Shaft_04184.png b/images/Shaft_04184.png new file mode 100644 index 0000000000000000000000000000000000000000..5d1e954025aa11c244c22cad008b1e9b42232fd3 --- /dev/null +++ b/images/Shaft_04184.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:999354711934005386ba0b47485a48f0b31472661adedd6f254ce1a3a7fec560 +size 77484 diff --git a/images/Shaft_04185.png b/images/Shaft_04185.png new file mode 100644 index 0000000000000000000000000000000000000000..460a07c23077a6120b83e4711d99d938a7f295d4 --- /dev/null +++ b/images/Shaft_04185.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2af2f7df1123908db5414aded1c34eb8336b4e94d430c650bf1879f2850b7eac +size 121171 diff --git a/images/Shaft_04186.png b/images/Shaft_04186.png new file mode 100644 index 0000000000000000000000000000000000000000..553a9b9b8ae290acfccc98fb8c5f3e5bbba03f37 --- /dev/null +++ b/images/Shaft_04186.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31e5ace68514e4904971287ed090002b63f4d18605fa383fd2dd1a4af4c8c3b4 +size 90806 diff --git a/images/Shaft_04187.png b/images/Shaft_04187.png new file mode 100644 index 0000000000000000000000000000000000000000..2ecb364c887ed75fb9eed81c30e6f78fa7306767 --- /dev/null +++ b/images/Shaft_04187.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cdb83bfd1f45a83b2b7d4d70ffbf550bfaf69842ecc197d35af7e73ecf31bcb +size 80230 diff --git a/images/Shaft_04188.png b/images/Shaft_04188.png new file mode 100644 index 0000000000000000000000000000000000000000..a1eb615b42a94fc2dbcd5a95c45bd4e63e7b8265 --- /dev/null +++ b/images/Shaft_04188.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c18bcba22b4d47f0bfc39eca1865f0b7ad71b3c318ce4a01a77a857f825742e4 +size 90402 diff --git a/images/Shaft_04189.png b/images/Shaft_04189.png new file mode 100644 index 0000000000000000000000000000000000000000..690851db5bcfebabec0d8aeaa3e150221affea6e --- /dev/null +++ b/images/Shaft_04189.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4a6fb626034c0e212ba8c0c58100acca39e926e8ec9bfa5cd357e7f256903148 +size 86140 diff --git a/images/Shaft_04190.png b/images/Shaft_04190.png new file mode 100644 index 0000000000000000000000000000000000000000..d87d9e63d311fd42b2de0f941726f37ec263353e --- /dev/null +++ b/images/Shaft_04190.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:439753d992a7693d917d2420093b20ebb923dc7b95b1047dc2d33d9eb3cc5a9b +size 111072 diff --git a/images/Shaft_04191.png b/images/Shaft_04191.png new file mode 100644 index 0000000000000000000000000000000000000000..1cc062d63f173d6c91e6c923d0db1da456fec09c --- /dev/null +++ b/images/Shaft_04191.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45af44e255902a967391dc79c7db18207016a9a36d4ccd93d5b08eb6a147f672 +size 73825 diff --git a/images/Shaft_04192.png b/images/Shaft_04192.png new file mode 100644 index 0000000000000000000000000000000000000000..cfd3bdc4e83f506a548ae33425327f6102308119 --- /dev/null +++ b/images/Shaft_04192.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:166b876e4899c1b6537c2faf45a0144901f2f3f911ac6f99612bc1b993ca842a +size 90161 diff --git a/images/Shaft_04193.png b/images/Shaft_04193.png new file mode 100644 index 0000000000000000000000000000000000000000..640c621fd2991b32d019029b918f79119313fda5 --- /dev/null +++ b/images/Shaft_04193.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7c94ae2db0328228c0b40f089be1e2c70425cf8686ed26567af4ed2b74b5af2c +size 93920 diff --git a/images/Shaft_04194.png b/images/Shaft_04194.png new file mode 100644 index 0000000000000000000000000000000000000000..61ef8c5f09a327ff135b33311a8a0c434df910ff --- /dev/null +++ b/images/Shaft_04194.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a70825e08d271b9674fa5898f14352a7dcf6de4f0468e82827b73c28371d9b5 +size 72898 diff --git a/images/Shaft_04195.png b/images/Shaft_04195.png new file mode 100644 index 0000000000000000000000000000000000000000..a7652c5874999d183e5b653a4026222f6364f7be --- /dev/null +++ b/images/Shaft_04195.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:934bbeebf2b3ac21b334a29cafa5ac2dab42b0d1ffb876e7d7341ca9d77ada3c +size 94309 diff --git a/images/Shaft_04196.png b/images/Shaft_04196.png new file mode 100644 index 0000000000000000000000000000000000000000..538735b05ca6069cec541e4da40dc05654cdbc75 --- /dev/null +++ b/images/Shaft_04196.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f7d267d9b0a7ef2037f74723851e3fb1d4d4dc27c208ee73dab9874a51717a6 +size 95427 diff --git a/images/Shaft_04197.png b/images/Shaft_04197.png new file mode 100644 index 0000000000000000000000000000000000000000..0612b0ef7de53a765f69f58a65409d520d2173f7 --- /dev/null +++ b/images/Shaft_04197.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f88eb08cd8133a67976a78d5202e125577c2c7eae60591615de6de74decafb63 +size 104971 diff --git a/images/Shaft_04198.png b/images/Shaft_04198.png new file mode 100644 index 0000000000000000000000000000000000000000..4225fad95e6424e3163655e6928ed8b6d05be3f2 --- /dev/null +++ b/images/Shaft_04198.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f2235642f3454c4f152a3ca5ba7e68073394af594901d6b259f258854ba7d4e2 +size 102458 diff --git a/images/Shaft_04199.png b/images/Shaft_04199.png new file mode 100644 index 0000000000000000000000000000000000000000..9b38e21b8b4836be4137ca816c8262d1b09f261e --- /dev/null +++ b/images/Shaft_04199.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd726a06382bc0e8c6f2012cbb5c3f24567c71c6eb44a51e0fdf5cc5a8fa2193 +size 83391 diff --git a/images/Shaft_04200.png b/images/Shaft_04200.png new file mode 100644 index 0000000000000000000000000000000000000000..f308a0cf5a477afc37df4f34b461786f777f1842 --- /dev/null +++ b/images/Shaft_04200.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef1b0500dd9ea3c420d365afdb624af7caaa3e42c877b00b5c7d47a840903484 +size 100675 diff --git a/images/Shaft_04201.png b/images/Shaft_04201.png new file mode 100644 index 0000000000000000000000000000000000000000..4cd6a3ab4ebd0050f989c14887ccdb4a08346e9c --- /dev/null +++ b/images/Shaft_04201.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b1d6eb969b2ff509cf31b4057e2b2ffc5ee1f5659222b8c6830d01099c6d9d1b +size 72354 diff --git a/images/Shaft_04202.png b/images/Shaft_04202.png new file mode 100644 index 0000000000000000000000000000000000000000..e7070985e86c8297dc8cba153f6812aea8021aae --- /dev/null +++ b/images/Shaft_04202.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9de81cab11447e890fccf14cff504b5026fa45ceb480c8b6e45fc5b6565e0b4a +size 72858 diff --git a/images/Shaft_04203.png b/images/Shaft_04203.png new file mode 100644 index 0000000000000000000000000000000000000000..89ce8a7ea1cfa834d90602151e76869e00d5bfaa --- /dev/null +++ b/images/Shaft_04203.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5833a05242550598f7a1217441d2ae323bf24d55aca7e6622da4174f59569933 +size 99794 diff --git a/images/Shaft_04204.png b/images/Shaft_04204.png new file mode 100644 index 0000000000000000000000000000000000000000..62917973115947e8da0799eb345ac6fb9d686c0a --- /dev/null +++ b/images/Shaft_04204.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e71166f9103706b7dbf2be1d8bfa39a605fa0809e9f97a62d2729535ff90e68 +size 101384 diff --git a/images/Shaft_04205.png b/images/Shaft_04205.png new file mode 100644 index 0000000000000000000000000000000000000000..a94ad7e9321c31f10e1fefc6de8671a038c387e9 --- /dev/null +++ b/images/Shaft_04205.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df53b3e8b19b80c84b9457692434dbdf64d28e7d10b08ca9f87e50df9bbbd7d8 +size 90781 diff --git a/images/Shaft_04206.png b/images/Shaft_04206.png new file mode 100644 index 0000000000000000000000000000000000000000..911202a37082789781543de98c9b4663ecd39df9 --- /dev/null +++ b/images/Shaft_04206.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08660e417975f7a7fc2d30fc5fe3c7925a17d99a19a18a93386d42cc1ab4c9f4 +size 82535 diff --git a/images/Shaft_04207.png b/images/Shaft_04207.png new file mode 100644 index 0000000000000000000000000000000000000000..e71dc4547b77bc7558115b73111e03849bcdbd24 --- /dev/null +++ b/images/Shaft_04207.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4ad4c40155682ead890c8415cafe677afc461265be548be7d5012ca94316338 +size 70500 diff --git a/images/Shaft_04208.png b/images/Shaft_04208.png new file mode 100644 index 0000000000000000000000000000000000000000..e2f093821f3b06a805074bc90dfd438cc9eba7e1 --- /dev/null +++ b/images/Shaft_04208.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5d476b50754404b54211bdc2741bcb4ffdf0f1b1aaa8603b58466322ce17cc0 +size 86454 diff --git a/images/Shaft_04209.png b/images/Shaft_04209.png new file mode 100644 index 0000000000000000000000000000000000000000..a38e2ee44ed23792b4feb073ffffdf64806111f0 --- /dev/null +++ b/images/Shaft_04209.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21f05713ec8f730769fd1d7f8965d4478b71ac8e46046058ac12ab23cab9113b +size 77457 diff --git a/images/Shaft_04210.png b/images/Shaft_04210.png new file mode 100644 index 0000000000000000000000000000000000000000..9d3c66ab43f2bd94e674c52f03426c1ac37f4689 --- /dev/null +++ b/images/Shaft_04210.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ae19678deac4265a4453dedc5a34b50442212c6d41b50d696b25bc460f32296 +size 80769 diff --git a/images/Shaft_04211.png b/images/Shaft_04211.png new file mode 100644 index 0000000000000000000000000000000000000000..6306e2558449061457473c2d209d56766e9418cf --- /dev/null +++ b/images/Shaft_04211.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:879f6fc20b3a0e28d5deef60017c2eefd469d03476e76e3741dfc2fd51c06dcd +size 74592 diff --git a/images/Shaft_04212.png b/images/Shaft_04212.png new file mode 100644 index 0000000000000000000000000000000000000000..a20d714fb0becf7451007c66f5e1a165f713ec1b --- /dev/null +++ b/images/Shaft_04212.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:37718b36d325696c53edff4584f5a1fc32a301989a3d5f395962aa165c4167dc +size 94372 diff --git a/images/Shaft_04213.png b/images/Shaft_04213.png new file mode 100644 index 0000000000000000000000000000000000000000..e2df9dfff384700a2ccb5ea5f1a1ec3cb7ae280d --- /dev/null +++ b/images/Shaft_04213.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f0b902d6d893992cb9c885cf5313f33996991e744b807740cca8ae62ad951dc2 +size 80637 diff --git a/images/Shaft_04214.png b/images/Shaft_04214.png new file mode 100644 index 0000000000000000000000000000000000000000..a67fcfec64191b042d52ec1b095f79cc964bfd11 --- /dev/null +++ b/images/Shaft_04214.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac768f114de6079497fb060200044656076d4ac6bfe43be7730903b50d8dc04e +size 105745 diff --git a/images/Shaft_04215.png b/images/Shaft_04215.png new file mode 100644 index 0000000000000000000000000000000000000000..0416e91928356866202cb59c4fcbf026b58c4c6c --- /dev/null +++ b/images/Shaft_04215.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95d1e218de44ca4ab63e972caf0252559186a9654c66bd8e471c8b073bb6c14c +size 84140 diff --git a/images/Shaft_04216.png b/images/Shaft_04216.png new file mode 100644 index 0000000000000000000000000000000000000000..94d8f8e4e314194ec65fcf1f002f498b1dccd3fb --- /dev/null +++ b/images/Shaft_04216.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff96a0a65b00315094af288f691df399140c48ed369c6de2216170af4b7d72e1 +size 82884 diff --git a/images/Shaft_04217.png b/images/Shaft_04217.png new file mode 100644 index 0000000000000000000000000000000000000000..e135d53a6fc85b9c4e007a313e0e79e55ce6df7e --- /dev/null +++ b/images/Shaft_04217.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:88bddc3c2bedf91ec99e7a4cfb1ba011aeb975396b2578de3f58d378498730af +size 81374 diff --git a/images/Shaft_04218.png b/images/Shaft_04218.png new file mode 100644 index 0000000000000000000000000000000000000000..a72dafce20cd134b444650057d4c7f14656943d8 --- /dev/null +++ b/images/Shaft_04218.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:043258470b2582233420a9bcee7869d38b9d37976a0823b47d825c14c63d4a3b +size 73047 diff --git a/images/Shaft_04219.png b/images/Shaft_04219.png new file mode 100644 index 0000000000000000000000000000000000000000..dbb6838189fd92233d0847f0a74f3eace3cc7e2d --- /dev/null +++ b/images/Shaft_04219.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10e9f6814060ee373d6d406e346eadc22cc3b3973d6c9620529ba0d167240523 +size 101830 diff --git a/images/Shaft_04220.png b/images/Shaft_04220.png new file mode 100644 index 0000000000000000000000000000000000000000..bd0f834924a18eb03dbb79bfee64c1be52216514 --- /dev/null +++ b/images/Shaft_04220.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68347e12d0ac0a625c0e9a3dc2917c2ec451f93e286228eb8543a2b376a901ad +size 70579 diff --git a/images/Shaft_04221.png b/images/Shaft_04221.png new file mode 100644 index 0000000000000000000000000000000000000000..f0671a39cc8088b93325433dbd4673d9e3058515 --- /dev/null +++ b/images/Shaft_04221.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b5d929b22f92b0c79c046f548364c6815f117abfa41fc287a96d5514e103081 +size 70349 diff --git a/images/Shaft_04222.png b/images/Shaft_04222.png new file mode 100644 index 0000000000000000000000000000000000000000..a537ee05512e4840d46127e4ca02ac5b19c30317 --- /dev/null +++ b/images/Shaft_04222.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:45de64d15c899c5c4b83ab7fde87c28a1aea3e38415c15e7031f56e195bc20af +size 91018 diff --git a/images/Shaft_04223.png b/images/Shaft_04223.png new file mode 100644 index 0000000000000000000000000000000000000000..6f0e320f89663ba8cbfc81644afb0ececb6d9ded --- /dev/null +++ b/images/Shaft_04223.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab83385ea9c27e79c8cd1a8c5b40d09edb1a09e9c03809dca6e0868f0e00f09e +size 113263 diff --git a/images/Shaft_04224.png b/images/Shaft_04224.png new file mode 100644 index 0000000000000000000000000000000000000000..0e32b7c7ede36c4cc5629bcf27e48775356bf8c3 --- /dev/null +++ b/images/Shaft_04224.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e42995805cc0e93e8f8916c69eda5ef623b421ca42b9efc28c56f181ff52195 +size 72373 diff --git a/images/Shaft_04225.png b/images/Shaft_04225.png new file mode 100644 index 0000000000000000000000000000000000000000..d6593b070b0e6e4496c21bb90b06cc63573bc9a3 --- /dev/null +++ b/images/Shaft_04225.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca3339b703a58c4ea8d4772da809b89ac479c15709ca63c201b37127f56d0e1b +size 72853 diff --git a/images/Shaft_04226.png b/images/Shaft_04226.png new file mode 100644 index 0000000000000000000000000000000000000000..84de895f4ad0c874b3b4f950ca671ef2c7cce59e --- /dev/null +++ b/images/Shaft_04226.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3bcccde1034982014b7a6d41f13f2c1ff60fda7ee427fbf3aa0cdf8fb1170434 +size 79065 diff --git a/images/Shaft_04227.png b/images/Shaft_04227.png new file mode 100644 index 0000000000000000000000000000000000000000..adbe5f9b4b973d27deeff240736cb9f3976de52f --- /dev/null +++ b/images/Shaft_04227.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:27b6754376a0540bead10ef7457ca54826399dd25ff9752c937b6603c8549409 +size 83070 diff --git a/images/Shaft_04228.png b/images/Shaft_04228.png new file mode 100644 index 0000000000000000000000000000000000000000..d1596d4c881917111490eefcd22cc2dc34b3d111 --- /dev/null +++ b/images/Shaft_04228.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95fcac73d3f1a4333c92a824315cfb892c0b2883dca772e918e57d79975100b9 +size 93830 diff --git a/images/Shaft_04229.png b/images/Shaft_04229.png new file mode 100644 index 0000000000000000000000000000000000000000..4412fcf3d307e4c2ebc6b1886877434afd87cdf8 --- /dev/null +++ b/images/Shaft_04229.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:505671d6008b92d0b88afbbf3f2a3187f2fc8c0a28ec876cc1cdacc836a88cc5 +size 72273 diff --git a/images/Shaft_04230.png b/images/Shaft_04230.png new file mode 100644 index 0000000000000000000000000000000000000000..b19b2f943533bdf5114d7494ed81f95a4c700402 --- /dev/null +++ b/images/Shaft_04230.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:872aea8cfbd6b5904b826e1f8d1f03c94f7431d52ad6a5284f6e530d5538c829 +size 94353 diff --git a/images/Shaft_04231.png b/images/Shaft_04231.png new file mode 100644 index 0000000000000000000000000000000000000000..90bc72769d0293fda758c591b49309c9b7fcbdb7 --- /dev/null +++ b/images/Shaft_04231.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eac320c5e8b7046e1a49a6054468cd6caa142ab27c585994cef940a3bd0d4d7f +size 103137 diff --git a/images/Shaft_04232.png b/images/Shaft_04232.png new file mode 100644 index 0000000000000000000000000000000000000000..92ae21e9d59c30429a5ae0ff539bf47d914cedbf --- /dev/null +++ b/images/Shaft_04232.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f158d5133408a26ddb64dc45b35f4ba0c1f55d1ff25135059aceeb87ebe7acd2 +size 70170 diff --git a/images/Shaft_04233.png b/images/Shaft_04233.png new file mode 100644 index 0000000000000000000000000000000000000000..a685ea6b69d7cb41213e534172ce54732029e2d1 --- /dev/null +++ b/images/Shaft_04233.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:371725f1c4a14abfea9c642914ae1e0be1fae563722a1dcf6c7467e64427d652 +size 75296 diff --git a/images/Shaft_04234.png b/images/Shaft_04234.png new file mode 100644 index 0000000000000000000000000000000000000000..2fc7596bd8d98902d66ab97acb0d756c9597cdb5 --- /dev/null +++ b/images/Shaft_04234.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:813e84e1d56f36520e2f7a7fe72edb423d47e638a22c066dc382738caba9970e +size 69918 diff --git a/images/Shaft_04235.png b/images/Shaft_04235.png new file mode 100644 index 0000000000000000000000000000000000000000..72625daf3deab3373294a25a9252579d2cbac1ce --- /dev/null +++ b/images/Shaft_04235.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ee89bd437d6e01317a92117c45d599e9fbd27c209853bfe865c22122cb46397 +size 95746 diff --git a/images/Shaft_04236.png b/images/Shaft_04236.png new file mode 100644 index 0000000000000000000000000000000000000000..996099995103ac5fd505c09272c7257ecca9d5d4 --- /dev/null +++ b/images/Shaft_04236.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc8a4deff3addf35ca80090041f99f2a64c0eadec469f5c1ec8b8beba8431c8c +size 73494 diff --git a/images/Shaft_04237.png b/images/Shaft_04237.png new file mode 100644 index 0000000000000000000000000000000000000000..ab847e39a36fb2a85bc17aa41d547ccac3336594 --- /dev/null +++ b/images/Shaft_04237.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4cb78db110b1e2140cd04ec7d27a52d15a4f05a744c2019d996c02f4da3cb05e +size 89115 diff --git a/images/Shaft_04238.png b/images/Shaft_04238.png new file mode 100644 index 0000000000000000000000000000000000000000..ab9155afbfac1354d78acedcb82d48cd272290b4 --- /dev/null +++ b/images/Shaft_04238.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16e42b91a8ef0c7eedfeda2dcb2346bdf4f23601958f15dcd9fa7f719b2597bf +size 87547 diff --git a/images/Shaft_04239.png b/images/Shaft_04239.png new file mode 100644 index 0000000000000000000000000000000000000000..e78a734ccad0a5dfc20e0cdbdb6bb03a96db3258 --- /dev/null +++ b/images/Shaft_04239.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b6b5b9179eaa4b2eb38b8cc13972a3b303f3ba443b5b794eca64f169d36dd77 +size 97925 diff --git a/images/Shaft_04240.png b/images/Shaft_04240.png new file mode 100644 index 0000000000000000000000000000000000000000..e66812b231547b31c7bf1497b4a7b9a76f728376 --- /dev/null +++ b/images/Shaft_04240.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c0f1e41388b76996ff4f792ab266a9b651235c14b0690ac2305343e994d0a76 +size 84798 diff --git a/images/Shaft_04241.png b/images/Shaft_04241.png new file mode 100644 index 0000000000000000000000000000000000000000..ac0ccb1a2ea77c5705c1ae1451e978b0e1009d43 --- /dev/null +++ b/images/Shaft_04241.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d353e3cf0b8b7e040095340fdca4ff1a0b4e644044259e4e728cd9ecbb1b08c +size 70170 diff --git a/images/Shaft_04242.png b/images/Shaft_04242.png new file mode 100644 index 0000000000000000000000000000000000000000..e63a11e7748825f6774c2801baae1fd92edb6348 --- /dev/null +++ b/images/Shaft_04242.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ee24c9035401aee9c728f2094d5a81d7ad5d80c47ef23aa0e0ceeb4de0d7361c +size 90808 diff --git a/images/Shaft_04243.png b/images/Shaft_04243.png new file mode 100644 index 0000000000000000000000000000000000000000..02d27be70de65a962da55b5b976a53a5aac1d1e1 --- /dev/null +++ b/images/Shaft_04243.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8166c57ab5f6ccb30b0981839e76f7b6b3dd1ff5e65669fee9274e71c574e58c +size 118214 diff --git a/images/Shaft_04244.png b/images/Shaft_04244.png new file mode 100644 index 0000000000000000000000000000000000000000..9367c908d0ec765080d20661d5cbff4f327b16e0 --- /dev/null +++ b/images/Shaft_04244.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:894bd5f8562273127a746a3a71721a752ae9b7b325976ec5ce5bd32e99f2765a +size 65811 diff --git a/images/Shaft_04245.png b/images/Shaft_04245.png new file mode 100644 index 0000000000000000000000000000000000000000..cea67bb0ce31317a715ffffbee621a5d6172ed4e --- /dev/null +++ b/images/Shaft_04245.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86dbf46265835caa41dea228580df3c93613212e7c3d58e5414270b931a13088 +size 89860 diff --git a/images/Shaft_04246.png b/images/Shaft_04246.png new file mode 100644 index 0000000000000000000000000000000000000000..d79c92186dae06cd5ff8d5d133df348c4a14a1f6 --- /dev/null +++ b/images/Shaft_04246.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f5b5d21954390932e94eda010fb0141357439c883d283fa891c6f659424b757 +size 82332 diff --git a/images/Shaft_04247.png b/images/Shaft_04247.png new file mode 100644 index 0000000000000000000000000000000000000000..bc16a4ef9b249e0d5636030c626586146b559b5f --- /dev/null +++ b/images/Shaft_04247.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1140abc297601f7755c68f333d7dac9cf8e72dfbfa2ef3a349ef48d47c3b3558 +size 107610 diff --git a/images/Shaft_04248.png b/images/Shaft_04248.png new file mode 100644 index 0000000000000000000000000000000000000000..f1cabe37055c0a054445c7641da7c3cf885eb419 --- /dev/null +++ b/images/Shaft_04248.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e9425603a4ca569ddf040e6787d0826083febcbd72c1dc73efa15c323a5dbcf +size 91256 diff --git a/images/Shaft_04249.png b/images/Shaft_04249.png new file mode 100644 index 0000000000000000000000000000000000000000..8cb277e32f5cb48dc58d00d6088f7e91f4e37ef9 --- /dev/null +++ b/images/Shaft_04249.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:716d5ebdf6099125361f5d65e76caa6c31cf24e3fcf706a3a126f5437f74d7e3 +size 87751 diff --git a/images/Shaft_04250.png b/images/Shaft_04250.png new file mode 100644 index 0000000000000000000000000000000000000000..49733967f7458085bf807b405e92544d1042e036 --- /dev/null +++ b/images/Shaft_04250.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdf4391870b8d19f9d350989c79107d91c0ce609e9377f0b04b30e549b0b7f0b +size 75298 diff --git a/images/Shaft_04251.png b/images/Shaft_04251.png new file mode 100644 index 0000000000000000000000000000000000000000..061cfa5626ddb70663a585f863f32800f0fd9625 --- /dev/null +++ b/images/Shaft_04251.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b42985d4f3195e2b7139daaed3f17c940e95f97f2ca29425ba4ca21764769ff +size 74506 diff --git a/images/Shaft_04252.png b/images/Shaft_04252.png new file mode 100644 index 0000000000000000000000000000000000000000..f7a67a502f18a4db40b6939b04f75bb2d16dcaf6 --- /dev/null +++ b/images/Shaft_04252.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ef6096845b4b98d84922a243aeabd2dc8e04af7b122ba71cb3f52e408264004 +size 103807 diff --git a/images/Shaft_04253.png b/images/Shaft_04253.png new file mode 100644 index 0000000000000000000000000000000000000000..f1dbdb840729006796d2bd810f21bd5bf77472b2 --- /dev/null +++ b/images/Shaft_04253.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4747d97e377569360d42c01ea9ecd181239ed91ec186fd9034c2f68c5da7057 +size 116247 diff --git a/images/Shaft_04254.png b/images/Shaft_04254.png new file mode 100644 index 0000000000000000000000000000000000000000..ce3dc6e333d5f212e00d6eabd448c4154b87d2a1 --- /dev/null +++ b/images/Shaft_04254.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:328025655d7d7f0f59f289b39802e7a00c4782f308929bbeaad6cf3bfd7bc516 +size 82938 diff --git a/images/Shaft_04255.png b/images/Shaft_04255.png new file mode 100644 index 0000000000000000000000000000000000000000..5e699bb82fd390e9fe171a669ee55e06254de9d2 --- /dev/null +++ b/images/Shaft_04255.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a1f0172636dc1cdc9d32e455a58893cb27f7eb540927562047196c5115a8d7c2 +size 82120 diff --git a/images/Shaft_04256.png b/images/Shaft_04256.png new file mode 100644 index 0000000000000000000000000000000000000000..1f36855c1d4f81ba1779d3c501b1b3874caa379a --- /dev/null +++ b/images/Shaft_04256.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f19d22f098a1294aa4ac7d65a553fcf5f567bbc4e32742b5a54624f727f7e3c8 +size 103310 diff --git a/images/Shaft_04257.png b/images/Shaft_04257.png new file mode 100644 index 0000000000000000000000000000000000000000..136e2f3282451f59e0da492bdfee482ab011a75a --- /dev/null +++ b/images/Shaft_04257.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1cfbb2104655017b86e04882bc3fce71686652e16ad346ed0aca5d3f66c9ecde +size 101398 diff --git a/images/Shaft_04258.png b/images/Shaft_04258.png new file mode 100644 index 0000000000000000000000000000000000000000..3e0a7b8686d0fe0d1833a8e15aa328dae1993c69 --- /dev/null +++ b/images/Shaft_04258.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7212815ce6a2ef2c77984b83bfe6832deb69fe7660b43f87d9efc0e20b94c1bd +size 97346 diff --git a/images/Shaft_04259.png b/images/Shaft_04259.png new file mode 100644 index 0000000000000000000000000000000000000000..8c5dc855655bbbf26f10bbf94998ca5f232d1221 --- /dev/null +++ b/images/Shaft_04259.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4dd35141e61c5a7ecf93ee6ef442e7d1106ba1c235625527ab1774564d4dce8 +size 80721 diff --git a/images/Shaft_04260.png b/images/Shaft_04260.png new file mode 100644 index 0000000000000000000000000000000000000000..97ea29ea7ce25ccd94af9be92b0de014b03a833c --- /dev/null +++ b/images/Shaft_04260.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d6f976f7b9e72c17959fc4cb65f578359bf3e283215d2455dc4e112cf251b5e +size 72785 diff --git a/images/Shaft_04261.png b/images/Shaft_04261.png new file mode 100644 index 0000000000000000000000000000000000000000..a88517ef50a4481c083e7617f0e99edfc73d5af1 --- /dev/null +++ b/images/Shaft_04261.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0310efcfa536763ae2d2d437d0719590ed2cd8d7be25d0b9024b418c2e87a12a +size 68217 diff --git a/images/Shaft_04262.png b/images/Shaft_04262.png new file mode 100644 index 0000000000000000000000000000000000000000..b13fc8db7fb2034375f2e6e1b17df191439483c8 --- /dev/null +++ b/images/Shaft_04262.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae2d579330f64dbccff441f2ae576ec83ee7060c05602d4ab02a5c553d41393f +size 69371 diff --git a/images/Shaft_04263.png b/images/Shaft_04263.png new file mode 100644 index 0000000000000000000000000000000000000000..066bc2c1d71296bcfb094cc73cef0532f9d1546e --- /dev/null +++ b/images/Shaft_04263.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8bb0df7a9dbe1ea6a1e3ed8d1d60c2ed3c7bb7390871ec7775b162fb0ff82ee +size 75826 diff --git a/images/Shaft_04264.png b/images/Shaft_04264.png new file mode 100644 index 0000000000000000000000000000000000000000..82015b72e49603d0ef8d6171429e2da84f0bfbe8 --- /dev/null +++ b/images/Shaft_04264.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab1714441980bc14d407f2f7e023d1c64d7cd02612aa205cecf8f7b55cd5140f +size 70300 diff --git a/images/Shaft_04265.png b/images/Shaft_04265.png new file mode 100644 index 0000000000000000000000000000000000000000..66c11171dc125f9b8e469fa2657c49a4b735fedc --- /dev/null +++ b/images/Shaft_04265.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2faca74cbda3a732278445dc4b5b11657cc4215825f9a97bea8202501175e553 +size 74258 diff --git a/images/Shaft_04266.png b/images/Shaft_04266.png new file mode 100644 index 0000000000000000000000000000000000000000..6259b79ae5a2edebe47adb4d96b3d4a73b40fa98 --- /dev/null +++ b/images/Shaft_04266.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:22edc10699ae8575f628c643e656a283732efd87b386c75dc898db8ccc015140 +size 82288 diff --git a/images/Shaft_04267.png b/images/Shaft_04267.png new file mode 100644 index 0000000000000000000000000000000000000000..b7ce22928d97f38718a0572cc918ebe5cdef5257 --- /dev/null +++ b/images/Shaft_04267.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71c50f3299f4ca6eacdefd47c0077d22bd8ad2a5d699f28fbe094621756730e7 +size 71736 diff --git a/images/Shaft_04268.png b/images/Shaft_04268.png new file mode 100644 index 0000000000000000000000000000000000000000..89290a6994474c241d70cce80a47ce80c0dd2cc1 --- /dev/null +++ b/images/Shaft_04268.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c76c184de395a3e20cdcbf2055c429d084d32d0b706aead92fe37bfc7b7407a6 +size 79435 diff --git a/images/Shaft_04269.png b/images/Shaft_04269.png new file mode 100644 index 0000000000000000000000000000000000000000..055422f309846436bc75cadf608fe4302857a94c --- /dev/null +++ b/images/Shaft_04269.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eebfd34f9ccfa8bf215877313525df11c761876fbf0b937f1f8cfc8b975e70e5 +size 73711 diff --git a/images/Shaft_04270.png b/images/Shaft_04270.png new file mode 100644 index 0000000000000000000000000000000000000000..e183cdc8cc86d0d2bf74f567bfce0ce2c417a6c9 --- /dev/null +++ b/images/Shaft_04270.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f31c8553af255e74c2482540a63e31f623b5f1dfbfdcaab0e3d61dd139568c8d +size 98645 diff --git a/images/Shaft_04271.png b/images/Shaft_04271.png new file mode 100644 index 0000000000000000000000000000000000000000..e508719ec84b10d3923155fe6b063ed11783f1e4 --- /dev/null +++ b/images/Shaft_04271.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8142c186fa19e8d108e15f5c8ec101d466b2bc6231f7d7ba7c0c9d56b4ed3e16 +size 93845 diff --git a/images/Shaft_04272.png b/images/Shaft_04272.png new file mode 100644 index 0000000000000000000000000000000000000000..1862851246f41d228ef90504022fe4e6c1ee6f6d --- /dev/null +++ b/images/Shaft_04272.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9097114199cf6aa4143470803a93babea48fe14db0fa197a5acff0a5badf10ba +size 76657 diff --git a/images/Shaft_04273.png b/images/Shaft_04273.png new file mode 100644 index 0000000000000000000000000000000000000000..e26bf38347285568251acb48dfcabb97a647a120 --- /dev/null +++ b/images/Shaft_04273.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2f6f9ea2dd98d62149fc332a435295bb5abafa14fce48c8238eb1aaac6ec49e +size 69489 diff --git a/images/Shaft_04274.png b/images/Shaft_04274.png new file mode 100644 index 0000000000000000000000000000000000000000..b95802cbe018d61757f18bec242577397280d415 --- /dev/null +++ b/images/Shaft_04274.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e83b0a718e7a930ca1ef214f012de61e680ea9bb9f69017515f445d4bcad2751 +size 118455 diff --git a/images/Shaft_04275.png b/images/Shaft_04275.png new file mode 100644 index 0000000000000000000000000000000000000000..4c1e4b88c7d24bd606c88ae6583dbcd1e9fb763f --- /dev/null +++ b/images/Shaft_04275.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:458bdf781d43c0de1124f78f5655744a29fcf504afb56cd637bf85db7bd15276 +size 95920 diff --git a/images/Shaft_04276.png b/images/Shaft_04276.png new file mode 100644 index 0000000000000000000000000000000000000000..0d6ab3698427a01c398b67c43a865ddbad77c8d8 --- /dev/null +++ b/images/Shaft_04276.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e460895d8af6289f68afc82fa8773fca6a6cceb07178b8c3ad1595a915e1719 +size 113495 diff --git a/images/Shaft_04277.png b/images/Shaft_04277.png new file mode 100644 index 0000000000000000000000000000000000000000..d3175d38f588df27070f3aa44ee4d261113d1666 --- /dev/null +++ b/images/Shaft_04277.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:31f175b2e38087da0ee473f995f881957fe7fc867fb391c8fb95567fb6e6a3c5 +size 88110 diff --git a/images/Shaft_04278.png b/images/Shaft_04278.png new file mode 100644 index 0000000000000000000000000000000000000000..54c66135c6dcc362c1aa107d1bb89eddb7dc5849 --- /dev/null +++ b/images/Shaft_04278.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9404c0520a84ff2e30318a3a73b98b83ea61da2e5d19ebde4a1d1c1ee725ad40 +size 114721 diff --git a/images/Shaft_04279.png b/images/Shaft_04279.png new file mode 100644 index 0000000000000000000000000000000000000000..a8d8e74d9dbb39a446ee0002f2f650d15104b843 --- /dev/null +++ b/images/Shaft_04279.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:914151704b4091e0e3e8edcad523709beaa3e0e5589295b105ac9edf0f22b462 +size 79015 diff --git a/images/Shaft_04280.png b/images/Shaft_04280.png new file mode 100644 index 0000000000000000000000000000000000000000..d84a5e99e6deac8b121155d3f21495bb952cc0e2 --- /dev/null +++ b/images/Shaft_04280.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43be7fb05c6bde2db8b9ed4d4fbb01a849424f52b3f59247d19cca1c66e16fbe +size 103922 diff --git a/images/Shaft_04281.png b/images/Shaft_04281.png new file mode 100644 index 0000000000000000000000000000000000000000..083408e164d9c4eb077f99566628d800c3fe3c10 --- /dev/null +++ b/images/Shaft_04281.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:191d4f13d567ddccff1d2b555a56fa918d02a1ce9e3bf0fc45a5b194d5a13584 +size 89785 diff --git a/images/Shaft_04282.png b/images/Shaft_04282.png new file mode 100644 index 0000000000000000000000000000000000000000..06201c3740c8590358f71a36afef0b65f12187e7 --- /dev/null +++ b/images/Shaft_04282.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:daca4b9e1a4d7e3a63142dd06c648c2a7132548dbe4ca9a842085602c98c6fa4 +size 88322 diff --git a/images/Shaft_04283.png b/images/Shaft_04283.png new file mode 100644 index 0000000000000000000000000000000000000000..05a9db2f575699cdca4fc243978f93611c5204c0 --- /dev/null +++ b/images/Shaft_04283.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad41d150860b8e8d721a444c9a50d3125c48422bb1dcdac4171220bd6d2d2334 +size 113263 diff --git a/images/Shaft_04284.png b/images/Shaft_04284.png new file mode 100644 index 0000000000000000000000000000000000000000..dd9e4ee2bc3a6059a12b6e91e790065395dd9935 --- /dev/null +++ b/images/Shaft_04284.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8275ef369fb6c1e69b53977c4f2662dc691e962852583126291af4cbee1361d5 +size 78773 diff --git a/images/Shaft_04285.png b/images/Shaft_04285.png new file mode 100644 index 0000000000000000000000000000000000000000..87b54c7584eb1f77a96707f6bcf99ad2bbce7ce2 --- /dev/null +++ b/images/Shaft_04285.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0632d1903cb6e0ef1ed4e96111e53ab5d9e2dc5b7a86e22f3811d8913b69bf55 +size 74953 diff --git a/images/Shaft_04286.png b/images/Shaft_04286.png new file mode 100644 index 0000000000000000000000000000000000000000..c34b22058c0c83194fbe783683f3a930ad310e7c --- /dev/null +++ b/images/Shaft_04286.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e27df2ca9ff283c5164a5a40e124cc78fb7d850d64ca9332d8c028eacc3e047f +size 75279 diff --git a/images/Shaft_04287.png b/images/Shaft_04287.png new file mode 100644 index 0000000000000000000000000000000000000000..fc53e116fe5e27ec23497c12aa6e0b431e71b29b --- /dev/null +++ b/images/Shaft_04287.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:260443cc7f28fec5f9bf91ba49909a4b1f4ec79d90ddc464a5fcecc4fbbe51a7 +size 115651 diff --git a/images/Shaft_04288.png b/images/Shaft_04288.png new file mode 100644 index 0000000000000000000000000000000000000000..d4e962db21b482bd641699a24855d613119aa4c9 --- /dev/null +++ b/images/Shaft_04288.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf7880d543f07de4bec20ece31b10e03712716964317d0db9212c3c75846153e +size 79400 diff --git a/images/Shaft_04289.png b/images/Shaft_04289.png new file mode 100644 index 0000000000000000000000000000000000000000..4e8d67ff8c885dc6683770119565b83cf0db1d07 --- /dev/null +++ b/images/Shaft_04289.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e627c651d7330fef90fca14091baaa1e0435d59990715e032230679dd76c6294 +size 72439 diff --git a/images/Shaft_04290.png b/images/Shaft_04290.png new file mode 100644 index 0000000000000000000000000000000000000000..dc8f3029f02fa17ade2a1c612474933ab4cd79a7 --- /dev/null +++ b/images/Shaft_04290.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:170dd6cf8231dd66d70f3154ec7271e298caca48421199c0c8f543ad442ec90e +size 103396 diff --git a/images/Shaft_04291.png b/images/Shaft_04291.png new file mode 100644 index 0000000000000000000000000000000000000000..7be18ad5163c263c3d4c07ef7dcd1208ce48d573 --- /dev/null +++ b/images/Shaft_04291.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:365c0259c717be16e3d181b954bd2390418bb6b944c453d4ff1404e955bfcf3d +size 103766 diff --git a/images/Shaft_04292.png b/images/Shaft_04292.png new file mode 100644 index 0000000000000000000000000000000000000000..82c9455661b85b301f84a7d977383ca65792b7de --- /dev/null +++ b/images/Shaft_04292.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c18964160acba30e72fb9e9d70e5d2c5b7c565f3b4c2c0bd18f66cd6916d6e7 +size 70443 diff --git a/images/Shaft_04293.png b/images/Shaft_04293.png new file mode 100644 index 0000000000000000000000000000000000000000..a52510703f876ae9064aa2b994e3cd4a89e64e4f --- /dev/null +++ b/images/Shaft_04293.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4295031b33fc2b84fb5d040dfcc132dcad2d8a0ca81f1e0fbe46414c8c8aecad +size 94625 diff --git a/images/Shaft_04294.png b/images/Shaft_04294.png new file mode 100644 index 0000000000000000000000000000000000000000..1e549b31064579324054b90bba1cc58b387f5df3 --- /dev/null +++ b/images/Shaft_04294.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a636909e99fd6669c379d91c407ee2b94d21c6dcb3f4976cb63a9ba91a248fd7 +size 99682 diff --git a/images/Shaft_04295.png b/images/Shaft_04295.png new file mode 100644 index 0000000000000000000000000000000000000000..a6900c1b0713acdeb85c3a80eefbea08217f178f --- /dev/null +++ b/images/Shaft_04295.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61d48207d87aa438b18e995b702b970736442aec53cf4711fb2ed73b1e4c8daa +size 74569 diff --git a/images/Shaft_04296.png b/images/Shaft_04296.png new file mode 100644 index 0000000000000000000000000000000000000000..366a920d79e315dccdb499548dab02eb69c24746 --- /dev/null +++ b/images/Shaft_04296.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df39f6cee66e213afef572bc760bd3bfc04221f16fd96ed46a4972ff780c3869 +size 86575 diff --git a/images/Shaft_04297.png b/images/Shaft_04297.png new file mode 100644 index 0000000000000000000000000000000000000000..06cc33b726ddacacc4294cbe3aae6d69ee7d63fa --- /dev/null +++ b/images/Shaft_04297.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:416c61fddcf11b2fab5c1637dd44b633edf46d3a417b09cf920490199f1149d6 +size 102626 diff --git a/images/Shaft_04298.png b/images/Shaft_04298.png new file mode 100644 index 0000000000000000000000000000000000000000..d253ad75f781957fa8076ef3a168ad753d04c2bc --- /dev/null +++ b/images/Shaft_04298.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:136d16af24d484f0804b6f2aab39dbbfee57c41f054ebfe356b62410ed5fe597 +size 93609 diff --git a/images/Shaft_04299.png b/images/Shaft_04299.png new file mode 100644 index 0000000000000000000000000000000000000000..988dac26e5d486e961d277579e41fd667c7e1961 --- /dev/null +++ b/images/Shaft_04299.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50516b8af214f014be3b53ec2f55e3470b91c6aabf56fe00874efa466acc41b0 +size 83736 diff --git a/images/Shaft_04300.png b/images/Shaft_04300.png new file mode 100644 index 0000000000000000000000000000000000000000..bd1c90de3dea9359e89e82171a08ffa6c996dcb0 --- /dev/null +++ b/images/Shaft_04300.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af4f88b4db2bdbcfb2910faef0908b42a3fb4e93ef1ec3f9dfb8ebfc796bc0bd +size 92804 diff --git a/images/Shaft_04301.png b/images/Shaft_04301.png new file mode 100644 index 0000000000000000000000000000000000000000..d3d6779a117f4c0cdecb45a0519fe569a1ceb19d --- /dev/null +++ b/images/Shaft_04301.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b423cfcd3b01c85b1cb29b6d9c01294edb68086b92bc9dea7a7a90538802506 +size 82181 diff --git a/images/Shaft_04302.png b/images/Shaft_04302.png new file mode 100644 index 0000000000000000000000000000000000000000..480b4f0efc5443d8e60085b23db14a9a50c2e2c6 --- /dev/null +++ b/images/Shaft_04302.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2644b749041df78ed10112c5f839e77eb5da90f16412813d60146d4db638322f +size 83060 diff --git a/images/Shaft_04303.png b/images/Shaft_04303.png new file mode 100644 index 0000000000000000000000000000000000000000..d981515b027c5331fbf4d102cde3f2a6e21998df --- /dev/null +++ b/images/Shaft_04303.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73f1c1981cc5bcfb0ffe80cc8be18ad537c3083a189104e6b6313b3c292d5836 +size 92303 diff --git a/images/Shaft_04304.png b/images/Shaft_04304.png new file mode 100644 index 0000000000000000000000000000000000000000..fe531b3bdd275b8617616bf86ad1b804e548c460 --- /dev/null +++ b/images/Shaft_04304.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ff22b83f61f869441eb864273b0cb5b5d68f5dfe5d547d6fde98ef73646e598 +size 88852 diff --git a/images/Shaft_04305.png b/images/Shaft_04305.png new file mode 100644 index 0000000000000000000000000000000000000000..2c175d26e72a8adb4d7f7227803e53bf1e954a5d --- /dev/null +++ b/images/Shaft_04305.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71d0b42d741eb9722b3909197618f33e8489006b13745abc6f0a3f76b963e5a4 +size 62140 diff --git a/images/Shaft_04306.png b/images/Shaft_04306.png new file mode 100644 index 0000000000000000000000000000000000000000..6bab41fe80ef67f73269813b0d0536369937629a --- /dev/null +++ b/images/Shaft_04306.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8f6701092b532a3628c587176924e3f1146a3d545303cefea7ed8c5140f4372 +size 79812 diff --git a/images/Shaft_04307.png b/images/Shaft_04307.png new file mode 100644 index 0000000000000000000000000000000000000000..cd0951de4701b0cb81d7c26e1a1468d686ffff59 --- /dev/null +++ b/images/Shaft_04307.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c510eede1c5cd5bbd52d4e65a6bf756d2b468e7203b3bc584adc6a2e22dd7fc +size 75237 diff --git a/images/Shaft_04308.png b/images/Shaft_04308.png new file mode 100644 index 0000000000000000000000000000000000000000..a5265d4e7d5b0c9957ba9402c059692bdc5961c5 --- /dev/null +++ b/images/Shaft_04308.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:960fe386b5dd75bfea5261ba6c0d31e71eaea313cdb7b58d739fcf5c92c23300 +size 98827 diff --git a/images/Shaft_04309.png b/images/Shaft_04309.png new file mode 100644 index 0000000000000000000000000000000000000000..a461a0305c21d1fc77c34ae92bbc3679c8dfbb6e --- /dev/null +++ b/images/Shaft_04309.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0224248637d4d8e9443d5865700d765d40bfc252e51b660c4e6979a7fa10278 +size 74974 diff --git a/images/Shaft_04310.png b/images/Shaft_04310.png new file mode 100644 index 0000000000000000000000000000000000000000..0df1d17ad76be083332fd4ffed99cc9a4ba1a3a6 --- /dev/null +++ b/images/Shaft_04310.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29bbd01a55ced01b66146ab2e057f2b96bc8e0bacbf2eb2b7b9878a5d2da1bb6 +size 89707 diff --git a/images/Shaft_04311.png b/images/Shaft_04311.png new file mode 100644 index 0000000000000000000000000000000000000000..d2f1a1f7188020e1e505f867ce9453cc027962a3 --- /dev/null +++ b/images/Shaft_04311.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c590f53c54052b51e1c23f28acf6229ae723b44c661992356266c09b81eb15bd +size 79276 diff --git a/images/Shaft_04312.png b/images/Shaft_04312.png new file mode 100644 index 0000000000000000000000000000000000000000..6b9cc86fc827b5f0f5ccc28ebd81fc8233ace8ce --- /dev/null +++ b/images/Shaft_04312.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8e768fedf6619fbcff70ea048327c4844ee7ee2a9d2509fbdff0d97f25444ac +size 81298 diff --git a/images/Shaft_04313.png b/images/Shaft_04313.png new file mode 100644 index 0000000000000000000000000000000000000000..29c14c1266ddd9bd59abcc0385bde3326efd309d --- /dev/null +++ b/images/Shaft_04313.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ffa33269dfdee7620d2ddef0325b826adbafffebc9ecba5f73aae33df35193a +size 90173 diff --git a/images/Shaft_04314.png b/images/Shaft_04314.png new file mode 100644 index 0000000000000000000000000000000000000000..740cfdaa836ab9c492a2f0b45118df3c0e8ec4f6 --- /dev/null +++ b/images/Shaft_04314.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:169da83b8cecf0f348152bd9594c025f02518c216c171e893de30b3e38be85cd +size 89534 diff --git a/images/Shaft_04315.png b/images/Shaft_04315.png new file mode 100644 index 0000000000000000000000000000000000000000..524f766925bbc8355f4e910c7c482057ced37d40 --- /dev/null +++ b/images/Shaft_04315.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4015ead131904d26ef954314a9ebbe78d7c1cf0dae3a6f208f0dcd433f4dc37d +size 80415 diff --git a/images/Shaft_04316.png b/images/Shaft_04316.png new file mode 100644 index 0000000000000000000000000000000000000000..fc45c6f6200a48f2d7d926bc0486f5221e5389f6 --- /dev/null +++ b/images/Shaft_04316.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b50238d95a47e3df13a878f793096e6710c0167ab65d23cab0c2e84b8faba72c +size 78365 diff --git a/images/Shaft_04317.png b/images/Shaft_04317.png new file mode 100644 index 0000000000000000000000000000000000000000..3cf38584332844a61dca38c614e810da07140418 --- /dev/null +++ b/images/Shaft_04317.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a2bb91b6519e087dabbb2c0bc41985174cdbf1e39a2e3c4c6746bdbb7a99112 +size 93436 diff --git a/images/Shaft_04318.png b/images/Shaft_04318.png new file mode 100644 index 0000000000000000000000000000000000000000..26a16f541d673f20405fdfd1a50be041f25bc8e9 --- /dev/null +++ b/images/Shaft_04318.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a17c28e99dab877a1f26e6eca76a63376c7c073dda07f1ac47a9ff40556d27df +size 95498 diff --git a/images/Shaft_04319.png b/images/Shaft_04319.png new file mode 100644 index 0000000000000000000000000000000000000000..280e3aea66d630be2baeb3df5ce254bcb28f11c5 --- /dev/null +++ b/images/Shaft_04319.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b09601e9f9fe402154b1b2ad57b937fa427681984c02780cdcea05fa65141de2 +size 90234 diff --git a/images/Shaft_04320.png b/images/Shaft_04320.png new file mode 100644 index 0000000000000000000000000000000000000000..ded90883702fb8d340a5ba140679000b94f71c35 --- /dev/null +++ b/images/Shaft_04320.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:89fc81e1f8080ce753b9dde59f7eb34a63e9fe1cfd332cdf7a18b7a8820303e4 +size 84000 diff --git a/images/Shaft_04321.png b/images/Shaft_04321.png new file mode 100644 index 0000000000000000000000000000000000000000..486c202918bc162ab4716b53de1929beee6fd93c --- /dev/null +++ b/images/Shaft_04321.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1a526c68bca2b7afc098337222f82026bb6069f5521106590bad5b93f8af883 +size 82522 diff --git a/images/Shaft_04322.png b/images/Shaft_04322.png new file mode 100644 index 0000000000000000000000000000000000000000..cc4ea06bd26fdc7435b3f096d074a029be1d01fc --- /dev/null +++ b/images/Shaft_04322.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0610340757e6e0645047a13ab21bdb801306277c4ce7a33c5c3ecaa7491d9f84 +size 79320 diff --git a/images/Shaft_04323.png b/images/Shaft_04323.png new file mode 100644 index 0000000000000000000000000000000000000000..1b626ecebdbbe7a31e348de932a06f17c92aa94d --- /dev/null +++ b/images/Shaft_04323.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:811ce1986792933e4be4f3a6c68da4c2337889510844e275fedaaddc9d55a203 +size 80193 diff --git a/images/Shaft_04324.png b/images/Shaft_04324.png new file mode 100644 index 0000000000000000000000000000000000000000..d02a6f512269a7d5593442b2c4578cf16a587083 --- /dev/null +++ b/images/Shaft_04324.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1978390ee5c6f03bb9ec39a9f916f625ac7337a1497f131f947fbfe49816dd9 +size 89799 diff --git a/images/Shaft_04325.png b/images/Shaft_04325.png new file mode 100644 index 0000000000000000000000000000000000000000..3d6acd4432febedfa9e9169b0cc74e658f9d29be --- /dev/null +++ b/images/Shaft_04325.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:48b502515b33ed403b45b762786ceb339ccde288f7001f28599042e7e2fc367f +size 117068 diff --git a/images/Shaft_04326.png b/images/Shaft_04326.png new file mode 100644 index 0000000000000000000000000000000000000000..435d375184d71204a68c4faa100997b3fef7816b --- /dev/null +++ b/images/Shaft_04326.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46b43a35cc9450beb8f2425cb6c5c6061d267823306de8932394e59e73334411 +size 71804 diff --git a/images/Shaft_04327.png b/images/Shaft_04327.png new file mode 100644 index 0000000000000000000000000000000000000000..84333941481a9237fe8c28402f0059c125b82de5 --- /dev/null +++ b/images/Shaft_04327.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed5c4044a7de841916d05300e84b7cca5cc1429dffe5a06bc6789bb86fb94159 +size 91385 diff --git a/images/Shaft_04328.png b/images/Shaft_04328.png new file mode 100644 index 0000000000000000000000000000000000000000..956561812480eecfb75ddbbe434491cd63b939e9 --- /dev/null +++ b/images/Shaft_04328.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74c7283a10820cf46f4cf9569ffd4fbc9c1d371442c6c5433d0d2c5d3c504b4c +size 70956 diff --git a/images/Shaft_04329.png b/images/Shaft_04329.png new file mode 100644 index 0000000000000000000000000000000000000000..574126a53ba192bd9b77a8a62293f28931c78721 --- /dev/null +++ b/images/Shaft_04329.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1db6b453fc7b3f8e6d7ac25d44e89caf705650977ec458f2b58b385b90d65979 +size 88048 diff --git a/images/Shaft_04330.png b/images/Shaft_04330.png new file mode 100644 index 0000000000000000000000000000000000000000..0a465458f8d9c0b7543ab053f816714dcb8286aa --- /dev/null +++ b/images/Shaft_04330.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d5dc2417daff01e3398f1d9bd66fd351ed7c3b5979b9a268d3a60cf1fdc9227 +size 69829 diff --git a/images/Shaft_04331.png b/images/Shaft_04331.png new file mode 100644 index 0000000000000000000000000000000000000000..160ea12c509f3160ca5982a2bbd9d5926a746a3f --- /dev/null +++ b/images/Shaft_04331.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c516ed2d6a1f77075140214ec3ca85eceb3e197744e5884f3ccd93b90b6563e5 +size 69082 diff --git a/images/Shaft_04332.png b/images/Shaft_04332.png new file mode 100644 index 0000000000000000000000000000000000000000..55db273374a2968172c1e9cd3a6d113428d89c79 --- /dev/null +++ b/images/Shaft_04332.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b280a2c2e5601ca0cf8dbd142ea9c544751aadf2feaba16685d77ddf49b22683 +size 108982 diff --git a/images/Shaft_04333.png b/images/Shaft_04333.png new file mode 100644 index 0000000000000000000000000000000000000000..86411f0d12cde7808f68c710cf1cf6d8d06a79a7 --- /dev/null +++ b/images/Shaft_04333.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:184324f8e325d78bc6959453f09c52bd9c8455f9c1d07e25b7abcf49bcddc13d +size 79304 diff --git a/images/Shaft_04334.png b/images/Shaft_04334.png new file mode 100644 index 0000000000000000000000000000000000000000..73d9a9a696e0fc5b1bb4f955d18d85c431fccfbc --- /dev/null +++ b/images/Shaft_04334.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae9ead0e036220ff0892beaaec1e952e6a9c52ae8ea274de8ab66c93995ddd3a +size 99844 diff --git a/images/Shaft_04335.png b/images/Shaft_04335.png new file mode 100644 index 0000000000000000000000000000000000000000..6697ffbb677307b256b3b76eee8aa883a47a4abf --- /dev/null +++ b/images/Shaft_04335.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e00027a4b447466380815ba0a0839d8a8cbe85deb29a43fef41e68acdc87fe2 +size 87554 diff --git a/images/Shaft_04336.png b/images/Shaft_04336.png new file mode 100644 index 0000000000000000000000000000000000000000..663740776f200b9b3fd3c126be4d162413ed9a80 --- /dev/null +++ b/images/Shaft_04336.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:910973f05c42f06d4a5dc13668aefbd19d387cc77508f996c38938b1a7ed2152 +size 98404 diff --git a/images/Shaft_04337.png b/images/Shaft_04337.png new file mode 100644 index 0000000000000000000000000000000000000000..452bbbb21be963151024fc300120777cd4df5323 --- /dev/null +++ b/images/Shaft_04337.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1fa4c7545d889d1b986ad24de657627d68f1c3fae75b743f59521471448cd8e +size 111922 diff --git a/images/Shaft_04338.png b/images/Shaft_04338.png new file mode 100644 index 0000000000000000000000000000000000000000..7eabe8ee6f79314d22c183452c63c0fd0d25a7f9 --- /dev/null +++ b/images/Shaft_04338.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e0b127bbd9bb88b690cd9fc75e7ac82b1ed3bbf3ce585e24f94702cfb0faef7 +size 95878 diff --git a/images/Shaft_04339.png b/images/Shaft_04339.png new file mode 100644 index 0000000000000000000000000000000000000000..2fde1312c2045f334a29cbed2b828bca6bdcf50a --- /dev/null +++ b/images/Shaft_04339.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b34a1fdfa447272508acd2d7d38353e4163a90b2eb2b57c6f4555e602e940626 +size 110526 diff --git a/images/Shaft_04340.png b/images/Shaft_04340.png new file mode 100644 index 0000000000000000000000000000000000000000..a0785a177e40962e6ddab25cadbee347324193e5 --- /dev/null +++ b/images/Shaft_04340.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a60a0a2e98177930b6239a403d631dc06951b3d3fda4a9b41875a08a0eb276d8 +size 95070 diff --git a/images/Shaft_04341.png b/images/Shaft_04341.png new file mode 100644 index 0000000000000000000000000000000000000000..ecc1e4340d140823505f7bfe3ed5fb1fd1486395 --- /dev/null +++ b/images/Shaft_04341.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7531a9b9d852fd1d766a6571425323462b42f812a613ee62cca9ef5ccd15dd90 +size 81607 diff --git a/images/Shaft_04342.png b/images/Shaft_04342.png new file mode 100644 index 0000000000000000000000000000000000000000..41d6a2a802f01784e321f39e7211852328d71e0f --- /dev/null +++ b/images/Shaft_04342.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf0824c4426a17ddd9adc9137e29c66adaad1e3881b05231bb7d359a32cc5035 +size 85603 diff --git a/images/Shaft_04343.png b/images/Shaft_04343.png new file mode 100644 index 0000000000000000000000000000000000000000..c7ea51c2ab46b604054c501ae749327843aeedba --- /dev/null +++ b/images/Shaft_04343.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc30e1357b3ef1145b7373d242c994691cb07d49cbb08b1bb093da18ddeb3779 +size 84915 diff --git a/images/Shaft_04344.png b/images/Shaft_04344.png new file mode 100644 index 0000000000000000000000000000000000000000..9ecb103c55df02dd0377e4a7ba506fbcc7cbe385 --- /dev/null +++ b/images/Shaft_04344.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:10dbf97565bfc22d9ed75d86bc399232c4b3f9b7a4b3f7c988a0d00beae1d7b2 +size 86358 diff --git a/images/Shaft_04345.png b/images/Shaft_04345.png new file mode 100644 index 0000000000000000000000000000000000000000..d8ee912d07df0cec00373aec7e10aeab07035d93 --- /dev/null +++ b/images/Shaft_04345.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9d8d501a905fad5cf7827da92f42512eb061397435de2102e2eecc9373d2281e +size 73896 diff --git a/images/Shaft_04346.png b/images/Shaft_04346.png new file mode 100644 index 0000000000000000000000000000000000000000..2471b7262711539107ab70b7ab9c05aaeac900a3 --- /dev/null +++ b/images/Shaft_04346.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d44b572e1803cedd18b380d52f4e67e98a7ea28bea7883b0c6a1fe45b7013b66 +size 102480 diff --git a/images/Shaft_04347.png b/images/Shaft_04347.png new file mode 100644 index 0000000000000000000000000000000000000000..72ddf3f4e5098566b9d365213bf6013aee6ae229 --- /dev/null +++ b/images/Shaft_04347.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f98825b60eb4f9d1769e547ead7ec2b4ea9ab013fba6f22e75fa248107228eac +size 82454 diff --git a/images/Shaft_04348.png b/images/Shaft_04348.png new file mode 100644 index 0000000000000000000000000000000000000000..07b750dd17a2ff1f52707ea01cf36445fbe7d303 --- /dev/null +++ b/images/Shaft_04348.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ab46bd255fc88827713304087b41ffcfe9c743bd89495b6e1be321ecd02433e +size 90600 diff --git a/images/Shaft_04349.png b/images/Shaft_04349.png new file mode 100644 index 0000000000000000000000000000000000000000..85ac6338b38efd5c948eab4b321ad9b638c7f598 --- /dev/null +++ b/images/Shaft_04349.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:436f67bffa08ad678ee385524371ebc624431256a27392fef1939ebead5edb9c +size 75357 diff --git a/images/Shaft_04350.png b/images/Shaft_04350.png new file mode 100644 index 0000000000000000000000000000000000000000..be7144a0fbae50381e814dc1d756526098d02c99 --- /dev/null +++ b/images/Shaft_04350.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:83f8a39d56e94ad572ba2d9bff3688bd47ffc515c0704decd841ead48769c3a0 +size 72802 diff --git a/images/Shaft_04351.png b/images/Shaft_04351.png new file mode 100644 index 0000000000000000000000000000000000000000..b7562f29553b8ad99777bc2a1c340375b13185ed --- /dev/null +++ b/images/Shaft_04351.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63f6f3ce4ed27c43a45b829a635d3fa9e344afbe2912b8ee940d4aa2ce6b6831 +size 92975 diff --git a/images/Shaft_04352.png b/images/Shaft_04352.png new file mode 100644 index 0000000000000000000000000000000000000000..77a8b83c5f85c6db9550c7d5545812a23ba06dbf --- /dev/null +++ b/images/Shaft_04352.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba2804bf2bcf92f47adea8b4b212518588e6fe1f6dd2d67b33c0caa7fd6b2d8d +size 107995 diff --git a/images/Shaft_04353.png b/images/Shaft_04353.png new file mode 100644 index 0000000000000000000000000000000000000000..dc5db647851467d051f51ef969c1e67e6f67ca0c --- /dev/null +++ b/images/Shaft_04353.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93a13783d0dd4ed93f84a9a8bdb064ef42684c76d8bfa61f12b037b1c86426bb +size 113697 diff --git a/images/Shaft_04354.png b/images/Shaft_04354.png new file mode 100644 index 0000000000000000000000000000000000000000..4216568a75c5cd81e0b723cf5bdb499ee486707c --- /dev/null +++ b/images/Shaft_04354.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8518be0f7bafc6a73de66ac96ece103f736ada8365fbc192471a3481e18a6505 +size 92226 diff --git a/images/Shaft_04355.png b/images/Shaft_04355.png new file mode 100644 index 0000000000000000000000000000000000000000..765b78d21b62fb51c11604e60c5bfc2e34184818 --- /dev/null +++ b/images/Shaft_04355.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:393d000287c94572c966d69a03a85d1f25cfcfbc4450b72fb49a2ef4e94aed4d +size 98592 diff --git a/images/Shaft_04356.png b/images/Shaft_04356.png new file mode 100644 index 0000000000000000000000000000000000000000..27ca0c84458b8a54cc84b8ee01c2f98f8a9964b3 --- /dev/null +++ b/images/Shaft_04356.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baf5448ae469f5d8c89e7d8bcbe4f01c62c8fa10bfbb323ac00f55dd1345ebe1 +size 96093 diff --git a/images/Shaft_04357.png b/images/Shaft_04357.png new file mode 100644 index 0000000000000000000000000000000000000000..343fa8422cc72b4590a159b64eecc2fed6e26dea --- /dev/null +++ b/images/Shaft_04357.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d052422f5c85d7a5ccf8cb5dc5db7166ddab4fabbc8f2f9e8ebea2a00d702e2 +size 106421 diff --git a/images/Shaft_04358.png b/images/Shaft_04358.png new file mode 100644 index 0000000000000000000000000000000000000000..299f4b6d80b4a043ffb3654e27b92ce734fcc38a --- /dev/null +++ b/images/Shaft_04358.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c22f78f6986f9842dab24b387ce600d6d401634b2d12d523fd234d59164380d +size 97670 diff --git a/images/Shaft_04359.png b/images/Shaft_04359.png new file mode 100644 index 0000000000000000000000000000000000000000..e954d112e998496c232b4a0a8569553d42717e54 --- /dev/null +++ b/images/Shaft_04359.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:085d37713b61615d65c2748abe62e6304c15be18472d1ec0762ace2bb940e10e +size 97364 diff --git a/images/Shaft_04360.png b/images/Shaft_04360.png new file mode 100644 index 0000000000000000000000000000000000000000..a4404146e2b43803960d581ae135e93925770fcc --- /dev/null +++ b/images/Shaft_04360.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ffd8a5fee0252be77a51a4c956968fe7deba493b4445dd4177602dd81cb5cd3 +size 79496 diff --git a/images/Shaft_04361.png b/images/Shaft_04361.png new file mode 100644 index 0000000000000000000000000000000000000000..b31766d8440d777d25a79653587b3018f21a3cdd --- /dev/null +++ b/images/Shaft_04361.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:046eb179b2333382ca7dd78cbd56b9f9fd4d15479818909ea22aa5dae733ab47 +size 84896 diff --git a/images/Shaft_04362.png b/images/Shaft_04362.png new file mode 100644 index 0000000000000000000000000000000000000000..f171cbe33c785bb19ccd221ae493e9bda2e8fb50 --- /dev/null +++ b/images/Shaft_04362.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8e6b3046e815b5d72b71fb4f76402cae80c93ae01c2b4982e0964827fc06b4cb +size 100722 diff --git a/images/Shaft_04363.png b/images/Shaft_04363.png new file mode 100644 index 0000000000000000000000000000000000000000..a2c7464cfe609bb21d9fb47c72c3f4882ddb671d --- /dev/null +++ b/images/Shaft_04363.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:171c9c95bbbdd8f492b86d123e43f4caf5c219e68340d60d555758c67b97bead +size 61144 diff --git a/images/Shaft_04364.png b/images/Shaft_04364.png new file mode 100644 index 0000000000000000000000000000000000000000..f92ce761c7798962b3a7085d53773c7c5234b0a9 --- /dev/null +++ b/images/Shaft_04364.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb25b557ff75c12944e9d5798ae3501f1ab3425288eb19cc86cf8419f005e598 +size 80538 diff --git a/images/Shaft_04365.png b/images/Shaft_04365.png new file mode 100644 index 0000000000000000000000000000000000000000..ca8014e1b31a77b5628de1d90beb8507b64952ad --- /dev/null +++ b/images/Shaft_04365.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb989bbc0c7f3867ef206dbb13c5f30daf4298a3eb6fde20604ad5b63b96b3d6 +size 113221 diff --git a/images/Shaft_04366.png b/images/Shaft_04366.png new file mode 100644 index 0000000000000000000000000000000000000000..76afe49da63c8f11014e61123aee40fbdcd359d9 --- /dev/null +++ b/images/Shaft_04366.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:947de06768c91dc3fb0e81008011066f20b2dcc632f21cbb9b0f7666d043b2e6 +size 81983 diff --git a/images/Shaft_04367.png b/images/Shaft_04367.png new file mode 100644 index 0000000000000000000000000000000000000000..75cccc3cec1a015f35907ae8a42ce0f6ef35debc --- /dev/null +++ b/images/Shaft_04367.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c51b4ba3d0be949f4a156dd3227ac29a229a4191f6db3e9b7a9a35eba662a2a8 +size 95102 diff --git a/images/Shaft_04368.png b/images/Shaft_04368.png new file mode 100644 index 0000000000000000000000000000000000000000..785e1ff00eb3728a5e4d20dd0de009f5b4370ea1 --- /dev/null +++ b/images/Shaft_04368.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:684d8156e5a1eb7737ba54e8a515ed893736179523109196573669181d8f8072 +size 76942 diff --git a/images/Shaft_04369.png b/images/Shaft_04369.png new file mode 100644 index 0000000000000000000000000000000000000000..d2af004c64bddb1458841b34efe35e01526c94ad --- /dev/null +++ b/images/Shaft_04369.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:488893e2b26e56897cf0357664a6fc2d8a48764e6a607c4ac0e9ec1bb1b5faef +size 95931 diff --git a/images/Shaft_04370.png b/images/Shaft_04370.png new file mode 100644 index 0000000000000000000000000000000000000000..ce82bfaf867c7967a8e28337cfcd86d8d36883e6 --- /dev/null +++ b/images/Shaft_04370.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4f4672e211c51ec6b569f08ded9afc4555af799a3ed9037fbd2c54510ecfe75 +size 105582 diff --git a/images/Shaft_04371.png b/images/Shaft_04371.png new file mode 100644 index 0000000000000000000000000000000000000000..37a1283679a37ba87de97e288b53f8b029ccf0d4 --- /dev/null +++ b/images/Shaft_04371.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9ab59ba5c490b4c6bcf7183a8448619443c401df7498049be0f2ef3fbb8b50b5 +size 82679 diff --git a/images/Shaft_04372.png b/images/Shaft_04372.png new file mode 100644 index 0000000000000000000000000000000000000000..09c11aa54b97e9b7ba89aff3082de0e119785719 --- /dev/null +++ b/images/Shaft_04372.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae37f9332a869dce5a150ab0fec6518f60f16bbc39c2309f2317c910bc5bfc81 +size 79276 diff --git a/images/Shaft_04373.png b/images/Shaft_04373.png new file mode 100644 index 0000000000000000000000000000000000000000..2ed68ca0044abc89be60462ab5f199969764f557 --- /dev/null +++ b/images/Shaft_04373.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b5faf62b1e968469675377ccc949fadd43cbcde34c659d1bdf984a5df549c7a +size 108710 diff --git a/images/Shaft_04374.png b/images/Shaft_04374.png new file mode 100644 index 0000000000000000000000000000000000000000..98252e57b34c763c640e883203e9b3f2638d1a9d --- /dev/null +++ b/images/Shaft_04374.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:622fe1de6fa74747000ca7b06ba5a2dce19197f1f386330edc0b952b05cd68db +size 80575 diff --git a/images/Shaft_04375.png b/images/Shaft_04375.png new file mode 100644 index 0000000000000000000000000000000000000000..2397c2edf43527228b561e37ff7aef5bec076ca7 --- /dev/null +++ b/images/Shaft_04375.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60317a11602892d9546b1613a08917f6e4686099ba29c0b02c9fb904fe36825b +size 79453 diff --git a/images/Shaft_04376.png b/images/Shaft_04376.png new file mode 100644 index 0000000000000000000000000000000000000000..9a835c2daeadfefd2b903dc413f6646720c0dc9c --- /dev/null +++ b/images/Shaft_04376.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:11dd7300596a2030220c7ed54bed9255f28c98a71e3fa6bafbe5b4dd175e60f3 +size 106990 diff --git a/images/Shaft_04377.png b/images/Shaft_04377.png new file mode 100644 index 0000000000000000000000000000000000000000..f4079800993c6a0b9453218e35f95121bd8f890b --- /dev/null +++ b/images/Shaft_04377.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9160627e7a80788fd9a474a99d2f61d7655f617c7de08afffe8af1cc5ba447b0 +size 97028 diff --git a/images/Shaft_04378.png b/images/Shaft_04378.png new file mode 100644 index 0000000000000000000000000000000000000000..01e47876340406d78282fe45b875aeac8ccaa642 --- /dev/null +++ b/images/Shaft_04378.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5aaf3f6514e3f46d6034089bf5e42165fa914475597afc07f6f9c95d4f8c69e8 +size 82310 diff --git a/images/Shaft_04379.png b/images/Shaft_04379.png new file mode 100644 index 0000000000000000000000000000000000000000..9312ff68ddbc2020ba30d828a3f081e81c47ff2b --- /dev/null +++ b/images/Shaft_04379.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e11495847b3cc48367e228b4a7e4c5fbb7ca6bbae54168dc3add22557e73837 +size 75463 diff --git a/images/Shaft_04380.png b/images/Shaft_04380.png new file mode 100644 index 0000000000000000000000000000000000000000..74886b452279cee589f4703e24fa210287890d8b --- /dev/null +++ b/images/Shaft_04380.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1de752d26ef06ac10c766dd6019c9d54029f40230476211b3b0ad9a198f528f +size 75344 diff --git a/images/Shaft_04381.png b/images/Shaft_04381.png new file mode 100644 index 0000000000000000000000000000000000000000..634d90d837760780241aa956660827535b290807 --- /dev/null +++ b/images/Shaft_04381.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58eb85fd59710884a3642cc9424c413eca88d1c8cde911794cdfc722ca4bebd6 +size 82104 diff --git a/images/Shaft_04382.png b/images/Shaft_04382.png new file mode 100644 index 0000000000000000000000000000000000000000..ddc1cd5b6dead262d5acd281125760cef37aca9b --- /dev/null +++ b/images/Shaft_04382.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:725cd353991e52f9c68b468fb7ffe65c5a6e0d095d5565a966d3959eeaabba0c +size 74740 diff --git a/images/Shaft_04383.png b/images/Shaft_04383.png new file mode 100644 index 0000000000000000000000000000000000000000..75a0c3447fae8bf62003a3fe010d319cdd6cd534 --- /dev/null +++ b/images/Shaft_04383.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60c23a510b7eb9be6af95bee0e8e451e5a7352434afa9732b629e7e0b7659553 +size 102866 diff --git a/images/Shaft_04384.png b/images/Shaft_04384.png new file mode 100644 index 0000000000000000000000000000000000000000..05a61d9ec4b088768bfcaa87517c4890d13c1b39 --- /dev/null +++ b/images/Shaft_04384.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0ca77fef35763ec0d09e3e841cf74fe24bbcb832dc7230d455943f0e504bb341 +size 84123 diff --git a/images/Shaft_04385.png b/images/Shaft_04385.png new file mode 100644 index 0000000000000000000000000000000000000000..9ead9eb624ad97848fd606eea0c99191b2478602 --- /dev/null +++ b/images/Shaft_04385.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c81a787a09028160efa68d60ef1fe745e21e0ff48265f8689a2558f3e5cb25c7 +size 85576 diff --git a/images/Shaft_04386.png b/images/Shaft_04386.png new file mode 100644 index 0000000000000000000000000000000000000000..daf92d5f72f572d0a014369332d9ec1548a2ac74 --- /dev/null +++ b/images/Shaft_04386.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d0d7946a2423d750be51d8ebe95ca410e26f0d9a644044aac6070d3a82d2d68 +size 74131 diff --git a/images/Shaft_04387.png b/images/Shaft_04387.png new file mode 100644 index 0000000000000000000000000000000000000000..37fc2e5353937cde601445e07df23a146688e2de --- /dev/null +++ b/images/Shaft_04387.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea7c277bbd41ec93331e68504606692773f188ea3d8a823279d45c63e2390d92 +size 89149 diff --git a/images/Shaft_04388.png b/images/Shaft_04388.png new file mode 100644 index 0000000000000000000000000000000000000000..1b86392ac0e95776972d03cf24dbdb84993c370f --- /dev/null +++ b/images/Shaft_04388.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b28d03c832f3d47faa4f0d6fb04a79dbfdbb81ae22277127ea14031fdea86d03 +size 81428 diff --git a/images/Shaft_04389.png b/images/Shaft_04389.png new file mode 100644 index 0000000000000000000000000000000000000000..5a0e2d97324cb49415423f26c1f18b596763ae11 --- /dev/null +++ b/images/Shaft_04389.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a7fd2042f17c2e7868a13ca5356fa23b1b731084b812a83bf74a8ce93f9dfbde +size 96608 diff --git a/images/Shaft_04390.png b/images/Shaft_04390.png new file mode 100644 index 0000000000000000000000000000000000000000..74f559e509741a72c3648363da7202f3c9ed4b52 --- /dev/null +++ b/images/Shaft_04390.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e2d8fd22f895bd8fe24d5db569bef40f7dd5d65b134c09eb2c10b4a177e94ce7 +size 91493 diff --git a/images/Shaft_04391.png b/images/Shaft_04391.png new file mode 100644 index 0000000000000000000000000000000000000000..5ef67d2eea790af4e9a16182ddbd856a087dd179 --- /dev/null +++ b/images/Shaft_04391.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8db1f9850d719e16419a20228a31370be390a87f6392447634c4bd14da6685a0 +size 103727 diff --git a/images/Shaft_04392.png b/images/Shaft_04392.png new file mode 100644 index 0000000000000000000000000000000000000000..954ad1500d83470b66a599581e9880dc52ccdc61 --- /dev/null +++ b/images/Shaft_04392.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b6930efa2ab8affbb65dd28bf6f5f2a0b36606190b9d0360a96026934f89a4a +size 82012 diff --git a/images/Shaft_04393.png b/images/Shaft_04393.png new file mode 100644 index 0000000000000000000000000000000000000000..618feeaf367014164a06412b37c3bcedbad9d4fb --- /dev/null +++ b/images/Shaft_04393.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9606db62b50421b9ec4d9a1e78c86ebc73c90ac40f697750e20131b0f248a104 +size 79676 diff --git a/images/Shaft_04394.png b/images/Shaft_04394.png new file mode 100644 index 0000000000000000000000000000000000000000..8ee656cabb98bdb2d456c6ff3ae1237832f8f960 --- /dev/null +++ b/images/Shaft_04394.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ef649ef54461c37e1f0dd1e323e5f445c1fca9c13b1b2f4ecf52ec7614b88430 +size 93506 diff --git a/images/Shaft_04395.png b/images/Shaft_04395.png new file mode 100644 index 0000000000000000000000000000000000000000..b86afcbba8fc2966067a54f851cd4d6a09044019 --- /dev/null +++ b/images/Shaft_04395.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:181e6fc6235d3113d4c66bf424c5afbbef4cc16b6d54755bd93f42d5210bc0cb +size 108561 diff --git a/images/Shaft_04396.png b/images/Shaft_04396.png new file mode 100644 index 0000000000000000000000000000000000000000..063b3debb8dc3fe3427e21ad70390b6908208554 --- /dev/null +++ b/images/Shaft_04396.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:973581ac64e6badae17ee1d658f78039529364e8ac610e476d34c92f99c3a318 +size 94009 diff --git a/images/Shaft_04397.png b/images/Shaft_04397.png new file mode 100644 index 0000000000000000000000000000000000000000..13996ab0aab38e407d02ea09d1e1b763786e1462 --- /dev/null +++ b/images/Shaft_04397.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2dc09ea6d1516caf22c1365b0c6d331da73ffdf26298439413a61cf57f87413 +size 100445 diff --git a/images/Shaft_04398.png b/images/Shaft_04398.png new file mode 100644 index 0000000000000000000000000000000000000000..ddb142a9e1c29766d625b787cbf6c2e51bbe9b90 --- /dev/null +++ b/images/Shaft_04398.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e58d8f62cc515db8c834077f79448723699ea1fe5cecf8fe682e603eab7f784 +size 71718 diff --git a/images/Shaft_04399.png b/images/Shaft_04399.png new file mode 100644 index 0000000000000000000000000000000000000000..785e63c64c2216872780201f229a4b7faf7a20fa --- /dev/null +++ b/images/Shaft_04399.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac343e5cf68ef0e512f1d8c86e7fa895ee5731f55fd5d9a50ae66c94ec77c88b +size 73993 diff --git a/images/Shaft_04400.png b/images/Shaft_04400.png new file mode 100644 index 0000000000000000000000000000000000000000..e05b2987ccd21a6c47c8f48f203c40cb26890cc2 --- /dev/null +++ b/images/Shaft_04400.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e78dbd53c77f16ec6c33ae5c45fb26af00e923b3f5702e998a8eae178b51fd5 +size 73170 diff --git a/images/Shaft_04401.png b/images/Shaft_04401.png new file mode 100644 index 0000000000000000000000000000000000000000..b946fc6468de8c5ad594b07bd0a5f9c8f347f171 --- /dev/null +++ b/images/Shaft_04401.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:454f9730d92a4332275ff0b4715c9b41d9b3efbd2633f8d613aa5953062d3e27 +size 96051 diff --git a/images/Shaft_04402.png b/images/Shaft_04402.png new file mode 100644 index 0000000000000000000000000000000000000000..952a0be446adccd459659f124826681f9ed17845 --- /dev/null +++ b/images/Shaft_04402.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e33012f26d3ab99c7489f8d5dafcc0d884c518531d8165bc7175cbc6c133d112 +size 89946 diff --git a/images/Shaft_04403.png b/images/Shaft_04403.png new file mode 100644 index 0000000000000000000000000000000000000000..1cdd523a480635f7a686c50543ec9756d433747a --- /dev/null +++ b/images/Shaft_04403.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18241e869104b3a197b0e4380743f63881e67709efbf4e4ff672e5199a1a16e8 +size 99891 diff --git a/images/Shaft_04404.png b/images/Shaft_04404.png new file mode 100644 index 0000000000000000000000000000000000000000..9a040c93e8f4d6428c16e2c7269d648c7689068e --- /dev/null +++ b/images/Shaft_04404.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2961a14084374dbdcf0cdebb85ae342fbd1246f8179bed4bd31d67bf8a422fc3 +size 73870 diff --git a/images/Shaft_04405.png b/images/Shaft_04405.png new file mode 100644 index 0000000000000000000000000000000000000000..c8d58e5e4a36e70dcf699d7932a7de25efdf0336 --- /dev/null +++ b/images/Shaft_04405.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1d1d9c07b10d0fdb0921409c72df8e0151677bac140d21cd6d40116815a224be +size 76095 diff --git a/images/Shaft_04406.png b/images/Shaft_04406.png new file mode 100644 index 0000000000000000000000000000000000000000..4418fcbf2fbc357e11650e0e1ef066d9c02e7535 --- /dev/null +++ b/images/Shaft_04406.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b531448bba8a75359490ed5bf7efd5fa22c4e485c1f7c6aceab68287947c1de +size 91915 diff --git a/images/Shaft_04407.png b/images/Shaft_04407.png new file mode 100644 index 0000000000000000000000000000000000000000..e5cf26a1c983940f4ba7f51944abb3e914655f50 --- /dev/null +++ b/images/Shaft_04407.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cef60c870418879341898b205d8983e8236f375ccb29b34af38033da9320d256 +size 105114 diff --git a/images/Shaft_04408.png b/images/Shaft_04408.png new file mode 100644 index 0000000000000000000000000000000000000000..0f0e83502128cc759e83f9ebaf33575bada15aa8 --- /dev/null +++ b/images/Shaft_04408.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e77b17dc1ec3a191d1d4777d2b39ca36d1331c5730eca716b4db176f1612771 +size 94135 diff --git a/images/Shaft_04409.png b/images/Shaft_04409.png new file mode 100644 index 0000000000000000000000000000000000000000..b2650ae38f4c9297cf812b9b43a3b0877aea7756 --- /dev/null +++ b/images/Shaft_04409.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4eae6a412b4e5bfc0cb77b3d1f6fa9a13729e72a83978755f09297a78f18ad06 +size 94669 diff --git a/images/Shaft_04410.png b/images/Shaft_04410.png new file mode 100644 index 0000000000000000000000000000000000000000..119ab4ac35f949d740d18623fcc8215e06aa7f35 --- /dev/null +++ b/images/Shaft_04410.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99d12724fe60316524ed9543b4627fd7abff79359230bf8a84f9d1d886a4803d +size 81398 diff --git a/images/Shaft_04411.png b/images/Shaft_04411.png new file mode 100644 index 0000000000000000000000000000000000000000..42a0fc758975d75915398a7416cd1e25843de4e7 --- /dev/null +++ b/images/Shaft_04411.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d429bd78d3731e76ce6d3c11cad6d79fb0b8a3d6cd8e9b33f1d7eb7eec4833f +size 88240 diff --git a/images/Shaft_04412.png b/images/Shaft_04412.png new file mode 100644 index 0000000000000000000000000000000000000000..ef94d7a2036f205c8a7046504a3dcae04ff170ff --- /dev/null +++ b/images/Shaft_04412.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9db6114f6dfcd916f5b20dd8733c7f9257b7d1f5bec1ded93722bf4e9a00d122 +size 68467 diff --git a/images/Shaft_04413.png b/images/Shaft_04413.png new file mode 100644 index 0000000000000000000000000000000000000000..6c770e6bec9a2c757c59a24948074ccd028e61a7 --- /dev/null +++ b/images/Shaft_04413.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:886142eb44da56a1fc7bab4558c03c24eca067d2b14fd040df5f88f9488b5fff +size 87501 diff --git a/images/Shaft_04414.png b/images/Shaft_04414.png new file mode 100644 index 0000000000000000000000000000000000000000..29cbbe32337a792e97702005dd3315f08ee4b63d --- /dev/null +++ b/images/Shaft_04414.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49a5194bd5a2b11df754a18f75534d6f8d027ac73ea405749e32be093bf19064 +size 75986 diff --git a/images/Shaft_04415.png b/images/Shaft_04415.png new file mode 100644 index 0000000000000000000000000000000000000000..b668ba43fc3997704d416f553b21d07556ef3284 --- /dev/null +++ b/images/Shaft_04415.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2696a177937306e2bd5e63f905da3c54796c3ac319b22aa9e1024e3764ef4ed6 +size 101296 diff --git a/images/Shaft_04416.png b/images/Shaft_04416.png new file mode 100644 index 0000000000000000000000000000000000000000..968315228cea2f56a212229885a196decbb5a566 --- /dev/null +++ b/images/Shaft_04416.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2bf1b1ca13099928b5a787dbfab3b54fb31eab7a5c3cfb90ce038c5a296de775 +size 76288 diff --git a/images/Shaft_04417.png b/images/Shaft_04417.png new file mode 100644 index 0000000000000000000000000000000000000000..38fc47ff6a99f12c21e2cc8c5f44a8a249b4c35e --- /dev/null +++ b/images/Shaft_04417.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c859a2c05a046e99b04dcb6bc804424c074b344e7dac07c3d1fa25f5a40d7835 +size 70688 diff --git a/images/Shaft_04418.png b/images/Shaft_04418.png new file mode 100644 index 0000000000000000000000000000000000000000..21730b28e10fcc4e9746cb5ebf8b4641cd8cc82c --- /dev/null +++ b/images/Shaft_04418.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8caf4654b2b34646e7778c96bb22a2b0b61122ef5f7e9dec27b7d13c6245763 +size 96569 diff --git a/images/Shaft_04419.png b/images/Shaft_04419.png new file mode 100644 index 0000000000000000000000000000000000000000..deefcfae334a06062099e09ae09b89dcc7698010 --- /dev/null +++ b/images/Shaft_04419.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b74b2f09bf42f7fd9e9202497647ea5e85cc26e6b7680601537cbc57f3f37f0b +size 83708 diff --git a/images/Shaft_04420.png b/images/Shaft_04420.png new file mode 100644 index 0000000000000000000000000000000000000000..f920185caaef069ba924547103fcc336ec706a8f --- /dev/null +++ b/images/Shaft_04420.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca9221e0e121cba680f6dfef9a5c78e2d333929fa4ff098c35632875c3b1b4aa +size 69281 diff --git a/images/Shaft_04421.png b/images/Shaft_04421.png new file mode 100644 index 0000000000000000000000000000000000000000..5c871087ed9e946f21819894d139b286164e7929 --- /dev/null +++ b/images/Shaft_04421.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:904e4fbdc8487c1abe8df0003136482253124493a8622eab51a3f497860caa33 +size 99338 diff --git a/images/Shaft_04422.png b/images/Shaft_04422.png new file mode 100644 index 0000000000000000000000000000000000000000..f72874537486a81bfa389bd70bc23f26d9590559 --- /dev/null +++ b/images/Shaft_04422.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70f052ba724c59cf064435b136e421434d30ac22fa0558b408621b1460f7070d +size 104358 diff --git a/images/Shaft_04423.png b/images/Shaft_04423.png new file mode 100644 index 0000000000000000000000000000000000000000..93730cb79e5743120fae9fe6df8c3fde49143491 --- /dev/null +++ b/images/Shaft_04423.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e07e2438e43922caa8453ad2d4dff550327ff620c95a158d430b8a6e186f2a7 +size 78983 diff --git a/images/Shaft_04424.png b/images/Shaft_04424.png new file mode 100644 index 0000000000000000000000000000000000000000..3baeab1e6ee7c9091047391f682b545a0290dbf7 --- /dev/null +++ b/images/Shaft_04424.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5414664315299f2bf3a93c2a886ec3cd7f64a05b2156713ecc8c9245a457bf97 +size 85103 diff --git a/images/Shaft_04425.png b/images/Shaft_04425.png new file mode 100644 index 0000000000000000000000000000000000000000..666baa7d09818322285e17344818f0006615fc2e --- /dev/null +++ b/images/Shaft_04425.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1fc3b7d3ba1c8aa5af0c734f9853d73c86375b9dea40a24b9d5edd01637978d0 +size 101296 diff --git a/images/Shaft_04426.png b/images/Shaft_04426.png new file mode 100644 index 0000000000000000000000000000000000000000..746778e73faec21449cedbfc35066db5207de639 --- /dev/null +++ b/images/Shaft_04426.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9e3134fea324627f8eb25421954aaf0e2aa025950005a0858b8e5f2646a96d7e +size 70508 diff --git a/images/Shaft_04427.png b/images/Shaft_04427.png new file mode 100644 index 0000000000000000000000000000000000000000..286ff53b788de85e85685824ddb95160e2f9a6f7 --- /dev/null +++ b/images/Shaft_04427.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99c2ce990eac2709abb02a786d7fb1d8ee956bb4936ff638513613fe57fa4d49 +size 84102 diff --git a/images/Shaft_04428.png b/images/Shaft_04428.png new file mode 100644 index 0000000000000000000000000000000000000000..2252684f4fb2ef1c4255aca4539acf872c4b627d --- /dev/null +++ b/images/Shaft_04428.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f576afd932a9faeb0b1e518257850e66b5b6df4767ed07b9e4748edb4b3f6790 +size 94812 diff --git a/images/Shaft_04429.png b/images/Shaft_04429.png new file mode 100644 index 0000000000000000000000000000000000000000..eb7e9f923d9da89d1c83dde1c9852f4fcfe5a2a4 --- /dev/null +++ b/images/Shaft_04429.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87b6d068fa8952195efdc353603299a9ffb471116094f4e634bce69d7705afba +size 81586 diff --git a/images/Shaft_04430.png b/images/Shaft_04430.png new file mode 100644 index 0000000000000000000000000000000000000000..84d0fb70b3cc3fb1e60f958d585b75510587c9d2 --- /dev/null +++ b/images/Shaft_04430.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc97e78ed3d72daa1ddeb15d41461db3c72b1dd0813a31698bb8ec0019852202 +size 81698 diff --git a/images/Shaft_04431.png b/images/Shaft_04431.png new file mode 100644 index 0000000000000000000000000000000000000000..ebededa90b8b1530ed9725228f33d20ed0572cb5 --- /dev/null +++ b/images/Shaft_04431.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30769cffc009c31a216b2113fde2e7e5d31cc613ce630eadb47e5d5bd604020d +size 73546 diff --git a/images/Shaft_04432.png b/images/Shaft_04432.png new file mode 100644 index 0000000000000000000000000000000000000000..9fc311d606c96c830e0d05ff11cb1f82b0434d34 --- /dev/null +++ b/images/Shaft_04432.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3732a7e477e63e460123520131d95407743c6a5a922db9c6d341ef192021aa25 +size 85674 diff --git a/images/Shaft_04433.png b/images/Shaft_04433.png new file mode 100644 index 0000000000000000000000000000000000000000..26a9b5c1fbaece2359192e883368a78c83e1eab7 --- /dev/null +++ b/images/Shaft_04433.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5b1875e36f1d4273f271a042ec9c65e8ca2ace880deaad0eb276ba9403e44c6 +size 69903 diff --git a/images/Shaft_04434.png b/images/Shaft_04434.png new file mode 100644 index 0000000000000000000000000000000000000000..0e6993a71feb7927926d8343db26c9fe06692176 --- /dev/null +++ b/images/Shaft_04434.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:478426dbfcc6358ee0e488e4739c9432462b9ff556adeaa768ef264a664e30b0 +size 78735 diff --git a/images/Shaft_04435.png b/images/Shaft_04435.png new file mode 100644 index 0000000000000000000000000000000000000000..059cbf354a31377d80ade1b3dbba9361ac3d78ab --- /dev/null +++ b/images/Shaft_04435.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8507b6ee16a087f9c0ec42da66a42fc144cee9c6defb72815791ad2cc8ba1bbf +size 82877 diff --git a/images/Shaft_04436.png b/images/Shaft_04436.png new file mode 100644 index 0000000000000000000000000000000000000000..6983114ff93e01ff448691d45435702d588ef5f1 --- /dev/null +++ b/images/Shaft_04436.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bd71d064255d574f51b45fc50df820ebe4f0fa8c4ab0ef53188c1f0ca603fed +size 87025 diff --git a/images/Shaft_04437.png b/images/Shaft_04437.png new file mode 100644 index 0000000000000000000000000000000000000000..c3dc97c40d8f1bd243cb722eeb7fecc5c37f9b3d --- /dev/null +++ b/images/Shaft_04437.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69a738fa2f320e77f676701ab31915a91e6794a2816cb91623630acc547ccaa1 +size 87151 diff --git a/images/Shaft_04438.png b/images/Shaft_04438.png new file mode 100644 index 0000000000000000000000000000000000000000..40766bfb522201b3592081efbd5e7294b22790f4 --- /dev/null +++ b/images/Shaft_04438.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:804099b970e44be5339d57942c7e96491ae13a401d153f66140b4d72f24db26c +size 75022 diff --git a/images/Shaft_04439.png b/images/Shaft_04439.png new file mode 100644 index 0000000000000000000000000000000000000000..db89e973bff83772e178ce92bdbb3d1aa889d4c8 --- /dev/null +++ b/images/Shaft_04439.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4886a44c1f64e5b96d22bfa17d07fe5ad254bf49c7410b6cdf29cb7b38fd5a52 +size 82749 diff --git a/images/Shaft_04440.png b/images/Shaft_04440.png new file mode 100644 index 0000000000000000000000000000000000000000..fe1926db3fd701fe101f9c1dc6ff337db779b770 --- /dev/null +++ b/images/Shaft_04440.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:caab5d1047503c3dc6af273bac17f88f50833f8b209b3a201b6a754ddf385bdd +size 84461 diff --git a/images/Shaft_04441.png b/images/Shaft_04441.png new file mode 100644 index 0000000000000000000000000000000000000000..05c1cc40950d14758cd03f2dd33d19a8c523d6c4 --- /dev/null +++ b/images/Shaft_04441.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:561f82c41703c3772da1d05066e7142989ffc5af1f0e946f89e87107c8672ca0 +size 82667 diff --git a/images/Shaft_04442.png b/images/Shaft_04442.png new file mode 100644 index 0000000000000000000000000000000000000000..e3a52b4f9e4c5e813ae9f7b7e3f1e59abbdf6530 --- /dev/null +++ b/images/Shaft_04442.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa33ce04ed30f96a88e50ee7ab3297ca3d5d0d8d66c2a42564ff9837a352667c +size 68357 diff --git a/images/Shaft_04443.png b/images/Shaft_04443.png new file mode 100644 index 0000000000000000000000000000000000000000..0f29b026dd817798ad85212790dd95bce264a44c --- /dev/null +++ b/images/Shaft_04443.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5de9f792bd7be585e4ebfa347e8f0ed189b0d55e25b99f1d58b98eba725df7c1 +size 106350 diff --git a/images/Shaft_04444.png b/images/Shaft_04444.png new file mode 100644 index 0000000000000000000000000000000000000000..6122f4813f0c42affbbfb3295f262a7e14298819 --- /dev/null +++ b/images/Shaft_04444.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eebc87a23dce40983b71754c8291077d38f25136a56d41078f0046a7f81eed18 +size 82983 diff --git a/images/Shaft_04445.png b/images/Shaft_04445.png new file mode 100644 index 0000000000000000000000000000000000000000..839eb479be94b65f52267d0aa18036d9ecf9d147 --- /dev/null +++ b/images/Shaft_04445.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ff603c4b740a0b6c6e6348753048862ea8de7a7358c087a0fb823e32f1698e84 +size 91101 diff --git a/images/Shaft_04446.png b/images/Shaft_04446.png new file mode 100644 index 0000000000000000000000000000000000000000..4662102ad9e18851fac6e0e9092a5dd259bdb4d2 --- /dev/null +++ b/images/Shaft_04446.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:840921254481d4509b59d70a7a1a70a8586adda418565ff37595b18157e63d38 +size 68538 diff --git a/images/Shaft_04447.png b/images/Shaft_04447.png new file mode 100644 index 0000000000000000000000000000000000000000..5e1dbae80e731e806dee70eb78d9f555a7e7de51 --- /dev/null +++ b/images/Shaft_04447.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:472bb22c1552d9a4ff01257964e2b58c0aa6c803d600c553c50246d7098e62a7 +size 75880 diff --git a/images/Shaft_04448.png b/images/Shaft_04448.png new file mode 100644 index 0000000000000000000000000000000000000000..fec642653c6c5a9c47835a88b656cb26dd10dcd7 --- /dev/null +++ b/images/Shaft_04448.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c2e21a59475a01e556f232c1c2089f171b9c6151b00581101a8a959cf597cd3 +size 80124 diff --git a/images/Shaft_04449.png b/images/Shaft_04449.png new file mode 100644 index 0000000000000000000000000000000000000000..7e6ede6867c35907860056cf068dffcfbd1a355c --- /dev/null +++ b/images/Shaft_04449.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:63eee5ba151dd0951ca08a3d7c433ecd13c1759def6a4986ea79e826294b1857 +size 81456 diff --git a/images/Shaft_04450.png b/images/Shaft_04450.png new file mode 100644 index 0000000000000000000000000000000000000000..8b8b30c0c2a017cea55e25ed244a22d0a092e86b --- /dev/null +++ b/images/Shaft_04450.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:660aecf9c817dad8bdede85fbc9a1ce895ea8bd7745a734025c7c10a620be197 +size 109508 diff --git a/images/Shaft_04451.png b/images/Shaft_04451.png new file mode 100644 index 0000000000000000000000000000000000000000..08227f14551ca5ed1934a5444b8df30fd33937c1 --- /dev/null +++ b/images/Shaft_04451.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:46250a6b0e29066bd100587ce184807188843a5a5e5033a0450b2a490eff92b8 +size 89859 diff --git a/images/Shaft_04452.png b/images/Shaft_04452.png new file mode 100644 index 0000000000000000000000000000000000000000..f94ef303c785e87d17991afc45620676a1085882 --- /dev/null +++ b/images/Shaft_04452.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8a11dd6ecefccad410cc39e2c20d8226be40ad5ae49a1867eea35b3ebce26dba +size 110713 diff --git a/images/Shaft_04453.png b/images/Shaft_04453.png new file mode 100644 index 0000000000000000000000000000000000000000..6b32b11fee57e09f0604fb7e301985d327e6266f --- /dev/null +++ b/images/Shaft_04453.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d0131028cdb47dfa7f1924f52667e2ac0f3090dc7cbdea0a586bfab2987a0315 +size 97350 diff --git a/images/Shaft_04454.png b/images/Shaft_04454.png new file mode 100644 index 0000000000000000000000000000000000000000..48bead96246d3a2210b9bdb203e68e83eabc382a --- /dev/null +++ b/images/Shaft_04454.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b4a238166fe8237bfcfd205755d0e2a533851228fcbc39d73c2a1b4beda7ec8 +size 86167 diff --git a/images/Shaft_04455.png b/images/Shaft_04455.png new file mode 100644 index 0000000000000000000000000000000000000000..4d72767319f406c42d3dee34c46e264b1410c281 --- /dev/null +++ b/images/Shaft_04455.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5552beef0c4880e9de591c52b666f5b9683c08be97d1b9479585973cce85f767 +size 88789 diff --git a/images/Shaft_04456.png b/images/Shaft_04456.png new file mode 100644 index 0000000000000000000000000000000000000000..87cdeff118e230fad32ae988dca3f286ef50ceaa --- /dev/null +++ b/images/Shaft_04456.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3fd0c7d0ae5550f6c43f3afb2a9c8e9be9e4a2fda0fdce88647c41d1680ed69 +size 72412 diff --git a/images/Shaft_04457.png b/images/Shaft_04457.png new file mode 100644 index 0000000000000000000000000000000000000000..3b6e45b22a194caa70248f9efc47a349ed3b2a4c --- /dev/null +++ b/images/Shaft_04457.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5691df0cded2e5d4bcfec7cc0a9007b304cbf04adf56e6c5a64d3dc7e40d490 +size 89346 diff --git a/images/Shaft_04458.png b/images/Shaft_04458.png new file mode 100644 index 0000000000000000000000000000000000000000..cfa6698b4ecdea859e201890ae80bf964678de69 --- /dev/null +++ b/images/Shaft_04458.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4eae331fd065b3dcc80559b6ecd4aeb30be525164bd3535f45b028782c7141a +size 95385 diff --git a/images/Shaft_04459.png b/images/Shaft_04459.png new file mode 100644 index 0000000000000000000000000000000000000000..4dc8d6c63ad3ad867a9ab3fc8ce2b5a7694ff640 --- /dev/null +++ b/images/Shaft_04459.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d81d8bd1507b7f155a2f4989e504ae4e4b066170fb84d4089b5a489055633692 +size 72800 diff --git a/images/Shaft_04460.png b/images/Shaft_04460.png new file mode 100644 index 0000000000000000000000000000000000000000..68ede7e5c7f0132569f98af2cc0e62c023cc83f8 --- /dev/null +++ b/images/Shaft_04460.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7bc085fd42455485fcffc6a2568bcf5a0ed852fb3cdb8c2eb22e2308eca2997c +size 82349 diff --git a/images/Shaft_04461.png b/images/Shaft_04461.png new file mode 100644 index 0000000000000000000000000000000000000000..dbcf3dcb4620e961f9b2ef5f468f444ed90c9550 --- /dev/null +++ b/images/Shaft_04461.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c081b1a4f6b7285e44b8b9fe39456df8deda20269eff4671882eeb0a4055995 +size 89091 diff --git a/images/Shaft_04462.png b/images/Shaft_04462.png new file mode 100644 index 0000000000000000000000000000000000000000..9b5b51d21af2a04dde033c1c11b78725086efaa3 --- /dev/null +++ b/images/Shaft_04462.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e1b37470c479e9e82af29d69d615807afd0777aa2a6c991b021d26e1dadc04d +size 99556 diff --git a/images/Shaft_04463.png b/images/Shaft_04463.png new file mode 100644 index 0000000000000000000000000000000000000000..c62156329c5a0c7fe7d5ce511c7802d09bced523 --- /dev/null +++ b/images/Shaft_04463.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f4af77fbafde77684acfd0767bce5d92340dc611448c89264cbf85535dea6810 +size 96182 diff --git a/images/Shaft_04464.png b/images/Shaft_04464.png new file mode 100644 index 0000000000000000000000000000000000000000..1c48d9f652af17f2567457f3225c2f5155390a76 --- /dev/null +++ b/images/Shaft_04464.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b8d09bfec1ebd343f17c410fe692ab647f9c00d8e71edef2c76d59a6dbde10e4 +size 73217 diff --git a/images/Shaft_04465.png b/images/Shaft_04465.png new file mode 100644 index 0000000000000000000000000000000000000000..4ccd95b33e0af2dcd04942cfd352cff221b2e74f --- /dev/null +++ b/images/Shaft_04465.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f1b9fa71c6178f68712c41eefd4a5692297006ff3ad62c639ed67d63cf6da75 +size 71461 diff --git a/images/Shaft_04466.png b/images/Shaft_04466.png new file mode 100644 index 0000000000000000000000000000000000000000..2a565ab8e90c5d0d2276cbf0fe0dbe286fd5d6d0 --- /dev/null +++ b/images/Shaft_04466.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c106eb76804fe3456956001586462aea26d1360f56df3a15f153eee4ecf1efda +size 73654 diff --git a/images/Shaft_04467.png b/images/Shaft_04467.png new file mode 100644 index 0000000000000000000000000000000000000000..4a96879e5af85100fdfc6ac66efeee4a0cbd307b --- /dev/null +++ b/images/Shaft_04467.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:72f4283cb6c8b2a1147a9fc3e26e0b3c7b29ec42a885126a5de839b831551987 +size 96005 diff --git a/images/Shaft_04468.png b/images/Shaft_04468.png new file mode 100644 index 0000000000000000000000000000000000000000..ad68d2c1603a42a9da0e98bdbc42fead6b0c851f --- /dev/null +++ b/images/Shaft_04468.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa451a9fb082442e24eb5bdc39dde7ff4d8b813e21dbc8b12e566dd76c49f48a +size 81348 diff --git a/images/Shaft_04469.png b/images/Shaft_04469.png new file mode 100644 index 0000000000000000000000000000000000000000..579a19f23a0266ba8322aa66858310f69352516b --- /dev/null +++ b/images/Shaft_04469.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a02a9a896572896a4b2c5b78f9256c68028ba213fbfa83012b39ff84c51df8a3 +size 109999 diff --git a/images/Shaft_04470.png b/images/Shaft_04470.png new file mode 100644 index 0000000000000000000000000000000000000000..0bb474483e6feb377b51265ee81ec7174f212ef5 --- /dev/null +++ b/images/Shaft_04470.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15c2ce41838e080d4d87023483b5d0b2b8fe4d3f8a5a8d10d632f7686d16bb5b +size 67898 diff --git a/images/Shaft_04471.png b/images/Shaft_04471.png new file mode 100644 index 0000000000000000000000000000000000000000..0b613648fa93fcaa31b21edde47726745d8edf71 --- /dev/null +++ b/images/Shaft_04471.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55ecc4619be7a39b096562f21cb2727a30b396e449edaba5c73d5daad9df1778 +size 102681 diff --git a/images/Shaft_04472.png b/images/Shaft_04472.png new file mode 100644 index 0000000000000000000000000000000000000000..e7354c87babd44549d7146079004e9fbbaec6baf --- /dev/null +++ b/images/Shaft_04472.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:079babbdcf797857d1af921083f14ad30a179c8341799f80adbac2867410f3c9 +size 72983 diff --git a/images/Shaft_04473.png b/images/Shaft_04473.png new file mode 100644 index 0000000000000000000000000000000000000000..ca39882d664b75e94af3d7591ef2d7c1af12d88e --- /dev/null +++ b/images/Shaft_04473.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b89c9fbfa9f45d2f9f2db5ffeb8b6a6d2a5a3ca87197dc5a5470d3436aa6123a +size 95922 diff --git a/images/Shaft_04474.png b/images/Shaft_04474.png new file mode 100644 index 0000000000000000000000000000000000000000..d2bfb399635fc9e129406331f044fa2391eb9c01 --- /dev/null +++ b/images/Shaft_04474.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c42374ffdd3778ea9149fa3f7af766f395ebfb77c02fc6a6c0ca468be51af8b2 +size 94592 diff --git a/images/Shaft_04475.png b/images/Shaft_04475.png new file mode 100644 index 0000000000000000000000000000000000000000..54c3235a2b3fb72b542d7dc78de4679d4c4499dd --- /dev/null +++ b/images/Shaft_04475.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7ab1b7919a49f2a931d582e131143dc5b80eff673d654f390fda9a22dced7a54 +size 74330 diff --git a/images/Shaft_04476.png b/images/Shaft_04476.png new file mode 100644 index 0000000000000000000000000000000000000000..5dd43f9a99a05b4f1caebb8567788d5b949b30f7 --- /dev/null +++ b/images/Shaft_04476.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9cbf1d01fdf9b780c915a1dbd8ca7b761aa671315bbd7aebaaf008eb35c32681 +size 68182 diff --git a/images/Shaft_04477.png b/images/Shaft_04477.png new file mode 100644 index 0000000000000000000000000000000000000000..95282f3a51680699a75a9c28ee0bee453063873d --- /dev/null +++ b/images/Shaft_04477.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0fa25bec931a551823aabf996be253b5d77d1b614af4e0c3b0c463d2d541e270 +size 89480 diff --git a/images/Shaft_04478.png b/images/Shaft_04478.png new file mode 100644 index 0000000000000000000000000000000000000000..2dbe4893b3359feb1be85be19689d1791cf7cc56 --- /dev/null +++ b/images/Shaft_04478.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cd893653008102bfb955f466528ae860b189702aaeadfa386d9f7973f2ecb594 +size 101992 diff --git a/images/Shaft_04479.png b/images/Shaft_04479.png new file mode 100644 index 0000000000000000000000000000000000000000..089d578fbd7cd74ab37596465acf8a7fa7209357 --- /dev/null +++ b/images/Shaft_04479.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:289e79d0db5979f16f4ad4ec5e578143851375d718e1d9099a7e036f86d60c46 +size 112104 diff --git a/images/Shaft_04480.png b/images/Shaft_04480.png new file mode 100644 index 0000000000000000000000000000000000000000..e51ed47314a1b7c63b45217d0341b840f00fa4a3 --- /dev/null +++ b/images/Shaft_04480.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:775b714a1b6159fc7a6dcab0cec57f7bdf2ddb41bf992d79cd385098125ea2ca +size 87050 diff --git a/images/Shaft_04481.png b/images/Shaft_04481.png new file mode 100644 index 0000000000000000000000000000000000000000..b620df6b297ea9402d6381312310cb7ecb485197 --- /dev/null +++ b/images/Shaft_04481.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ef801d7148423d03585d4a451f3f2df1aa10e409555fffc4435f8d1817e11ff +size 104871 diff --git a/images/Shaft_04482.png b/images/Shaft_04482.png new file mode 100644 index 0000000000000000000000000000000000000000..8bafd936faac9f31f1c4fe5124e221e87e602cdc --- /dev/null +++ b/images/Shaft_04482.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:16e64ac312e9d846949ca23737b2f5092488ed7492645dfce6581e127f4f34ca +size 66744 diff --git a/images/Shaft_04483.png b/images/Shaft_04483.png new file mode 100644 index 0000000000000000000000000000000000000000..c17fee9e12b3fd9369850e087e8e47c627fb73c5 --- /dev/null +++ b/images/Shaft_04483.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:542c7db2f2bd75d4ab5d3cf7869a86caf889bc759f05ce10105b87bee251d4e3 +size 82082 diff --git a/images/Shaft_04484.png b/images/Shaft_04484.png new file mode 100644 index 0000000000000000000000000000000000000000..5a4cf651ebd33bcb66d85ffb65922c2ef138c87a --- /dev/null +++ b/images/Shaft_04484.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49181cdef828d30ca6f182b38c80387268915539baa074158abc3b5137a98350 +size 71625 diff --git a/images/Shaft_04485.png b/images/Shaft_04485.png new file mode 100644 index 0000000000000000000000000000000000000000..d16208895e3cd16a9ae08397082286a92432f3ce --- /dev/null +++ b/images/Shaft_04485.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00b982d672d5625ba1010d84cc318cf26d1fb2cd76ee03aab933ed3a2fd65dc3 +size 70843 diff --git a/images/Shaft_04486.png b/images/Shaft_04486.png new file mode 100644 index 0000000000000000000000000000000000000000..9630605bab1ae0821da7e5dcc06379735defb39e --- /dev/null +++ b/images/Shaft_04486.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e21c14d7b1cf651d0f949beb3b423d76469751a92dc658747c7a04aa398e3671 +size 84187 diff --git a/images/Shaft_04487.png b/images/Shaft_04487.png new file mode 100644 index 0000000000000000000000000000000000000000..45934ae16e0ade82234758b192412121c302c61b --- /dev/null +++ b/images/Shaft_04487.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1555d4c4c69e459b8b0ee8d82ac6ec20ccc1a7770fa91dccadaf1cfc9a15c0a0 +size 78784 diff --git a/images/Shaft_04488.png b/images/Shaft_04488.png new file mode 100644 index 0000000000000000000000000000000000000000..e28c2fa96a6a7a562e35ba0ab98d73a4440ff01d --- /dev/null +++ b/images/Shaft_04488.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed7a303a26f553fbecf81d5e4f169556fcbebf3ad20b658e07685b3aec64b257 +size 80645 diff --git a/images/Shaft_04489.png b/images/Shaft_04489.png new file mode 100644 index 0000000000000000000000000000000000000000..db020254a185e2f4f0f09d2f366876f9b255ec36 --- /dev/null +++ b/images/Shaft_04489.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a618745f6d96a3da7c97303060990e0cbabd586a68cd407d83e022c627c0f12 +size 79667 diff --git a/images/Shaft_04490.png b/images/Shaft_04490.png new file mode 100644 index 0000000000000000000000000000000000000000..3db6e8a6f4d9f84959376d19a52fac6680ed7954 --- /dev/null +++ b/images/Shaft_04490.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b6107f23b6ffc69131a407c64338861e7b1f1ac738cfea72b0d38412151b628 +size 83580 diff --git a/images/Shaft_04491.png b/images/Shaft_04491.png new file mode 100644 index 0000000000000000000000000000000000000000..24ed4ae2d142582abe2d26c42a4b3a4e28e8d650 --- /dev/null +++ b/images/Shaft_04491.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:845cc98532a4d0e952223bcbbbb29e5f1549c633f586809c07fd2e45b5a7d854 +size 80772 diff --git a/images/Shaft_04492.png b/images/Shaft_04492.png new file mode 100644 index 0000000000000000000000000000000000000000..83173bd4c34fbd4be07a44c6100aca043ab7bee6 --- /dev/null +++ b/images/Shaft_04492.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba17de7b2900f65be2232378d8be046693f8319a328fba40dcd10ce9c5572548 +size 65053 diff --git a/images/Shaft_04493.png b/images/Shaft_04493.png new file mode 100644 index 0000000000000000000000000000000000000000..d939cdf0373156b3e045af186566c32be396a362 --- /dev/null +++ b/images/Shaft_04493.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa44a3af4a49d26554d9d7c4d5d6af26d524d5b30795b3e872ec7f58625ac77e +size 80411 diff --git a/images/Shaft_04494.png b/images/Shaft_04494.png new file mode 100644 index 0000000000000000000000000000000000000000..1d4541f4f3e49bc78232a27a78c9e7a7cb196f34 --- /dev/null +++ b/images/Shaft_04494.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:09f310fa20e5f3c728c10eb3aa8c1f45d066bbdaea799ddbb1872334dbccb1f3 +size 68571 diff --git a/images/Shaft_04495.png b/images/Shaft_04495.png new file mode 100644 index 0000000000000000000000000000000000000000..df6052645afac3c7e80b7a6ae999c5dda414a655 --- /dev/null +++ b/images/Shaft_04495.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3216a753551759b85d5cbaf6236f7d390c7262802c72592f03542a8908cd1f5 +size 77420 diff --git a/images/Shaft_04496.png b/images/Shaft_04496.png new file mode 100644 index 0000000000000000000000000000000000000000..56da8cb5a9f50b2173b65db5d3fb3c0cba60eb54 --- /dev/null +++ b/images/Shaft_04496.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1add2bb81bef18774e8324d8744561d597ea501f52488d91114b6c3a8a71538b +size 97648 diff --git a/images/Shaft_04497.png b/images/Shaft_04497.png new file mode 100644 index 0000000000000000000000000000000000000000..fb1caf442bdfb8e458acea5adbefcd7bb5491950 --- /dev/null +++ b/images/Shaft_04497.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d3a8961bad2e6cbec376bd2e902e1250c710fe2088926f8fb6bac391de6607c +size 89686 diff --git a/images/Shaft_04498.png b/images/Shaft_04498.png new file mode 100644 index 0000000000000000000000000000000000000000..74a6cfcee4d3a3c2b1da278d1813dbc3c21b6877 --- /dev/null +++ b/images/Shaft_04498.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b22e7629dea50f05df71acc0b7cc48b89ad46a6fc025be97248beb51d3cf97b2 +size 75900 diff --git a/images/Shaft_04499.png b/images/Shaft_04499.png new file mode 100644 index 0000000000000000000000000000000000000000..4053d441b088ffaab8b58507435c8189baf5ae2e --- /dev/null +++ b/images/Shaft_04499.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f0ba869fa1c09a8a19ceac7ed21cfd82de6aca13e285108dee20e2ba2891f35 +size 75110 diff --git a/images/Shaft_04500.png b/images/Shaft_04500.png new file mode 100644 index 0000000000000000000000000000000000000000..9f56c6ee3a91169b08d7512a7b0b76677d6580c4 --- /dev/null +++ b/images/Shaft_04500.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c2f102c153991f5b08cf544df53dd2a609733fdf3516a2e08ce281574c2902d +size 81948 diff --git a/images/Shaft_04501.png b/images/Shaft_04501.png new file mode 100644 index 0000000000000000000000000000000000000000..4be510b6b89a7061e8f2e0575cdb0bd0b2486435 --- /dev/null +++ b/images/Shaft_04501.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f331fc3da610a881c908c95867a56cc29eb2ae89fc8ff8ed70d9ad29385dbc65 +size 65441 diff --git a/images/Shaft_04502.png b/images/Shaft_04502.png new file mode 100644 index 0000000000000000000000000000000000000000..479206d58f9db8bb9fc88e681c7866ca7e7aef6e --- /dev/null +++ b/images/Shaft_04502.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e355cdf77bdbde5322e8fcd5e9da07590f2e479846e77b300bbb7f8fbadddfe7 +size 75111 diff --git a/images/Shaft_04503.png b/images/Shaft_04503.png new file mode 100644 index 0000000000000000000000000000000000000000..72245e6256e456128d8850bb000614b1443b1b82 --- /dev/null +++ b/images/Shaft_04503.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fda23b88e23d1bfccb84e944c1bca054443708716b51d1701cfb410ee85edcd1 +size 93277 diff --git a/images/Shaft_04504.png b/images/Shaft_04504.png new file mode 100644 index 0000000000000000000000000000000000000000..c3dd1e5158932828af488c0b0de43a67db98ebb4 --- /dev/null +++ b/images/Shaft_04504.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:44ee4752983e6a8cd6c21e508607103f0b89d89c89b48b153c51c53b181a9b54 +size 84338 diff --git a/images/Shaft_04505.png b/images/Shaft_04505.png new file mode 100644 index 0000000000000000000000000000000000000000..b35604d5660762fc1085fb9e460cce78057d9ed0 --- /dev/null +++ b/images/Shaft_04505.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18ffe8d5f360a9e664d2e0c4829309ebbdfa78ffe1d5cd09936d569c14fd1b05 +size 78716 diff --git a/images/Shaft_04506.png b/images/Shaft_04506.png new file mode 100644 index 0000000000000000000000000000000000000000..c45fe3b6b3112249c7667b800956321f14b3ca6b --- /dev/null +++ b/images/Shaft_04506.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f85896b36f7fd455bf4d911266621ff2bf826d7f1773682b4e2db17e46c696e +size 91208 diff --git a/images/Shaft_04507.png b/images/Shaft_04507.png new file mode 100644 index 0000000000000000000000000000000000000000..623a071d25ed80ad049000a6c66a0fba42eed686 --- /dev/null +++ b/images/Shaft_04507.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:856fe78377c6aece72ae7cd0e4f07552e95ce48cf934460fa22fefec07daa916 +size 69372 diff --git a/images/Shaft_04508.png b/images/Shaft_04508.png new file mode 100644 index 0000000000000000000000000000000000000000..43d2c9d780d128313b223cd9e3d8404e845ab0d5 --- /dev/null +++ b/images/Shaft_04508.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:659ff1e38aa42e5df96181175a74cb076b1cfadb46b66541aa8cb9f96f65cf5d +size 73923 diff --git a/images/Shaft_04509.png b/images/Shaft_04509.png new file mode 100644 index 0000000000000000000000000000000000000000..c907f96eb0f67c0722e2ab8776f3292afd872d6b --- /dev/null +++ b/images/Shaft_04509.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d5d8bd56c43cc20bcd2351984175d8cce051f046b155a0b30cf95abc0722f021 +size 74866 diff --git a/images/Shaft_04510.png b/images/Shaft_04510.png new file mode 100644 index 0000000000000000000000000000000000000000..30331d744e6ccc107f4f757557e52bf8e9c687a4 --- /dev/null +++ b/images/Shaft_04510.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f725f21884e472c896a82ee67cb89eeaa244af267d5847cd35f13c95dfa151ed +size 82241 diff --git a/images/Shaft_04511.png b/images/Shaft_04511.png new file mode 100644 index 0000000000000000000000000000000000000000..c4da146a0a27887e475be8d32fa34a2624e9f85d --- /dev/null +++ b/images/Shaft_04511.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa7155457df55942e78ebb9016e23b1b9eef8a04573fd5703dbfea96bda88cfb +size 108981 diff --git a/images/Shaft_04512.png b/images/Shaft_04512.png new file mode 100644 index 0000000000000000000000000000000000000000..557e04c5b664d464d40de89e4d84bba45c8897b3 --- /dev/null +++ b/images/Shaft_04512.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eddc46c44ddffb149a9d84fc7b0bb2b2ce7ba4be68f47e7db3f11738d950287d +size 79060 diff --git a/images/Shaft_04513.png b/images/Shaft_04513.png new file mode 100644 index 0000000000000000000000000000000000000000..9a90afafe13ad9bb944fb9cc154299f28bd870f0 --- /dev/null +++ b/images/Shaft_04513.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f424f7ef55975b452b492a67853a6a72c17541d169ba297865d43a02b69189a +size 70604 diff --git a/images/Shaft_04514.png b/images/Shaft_04514.png new file mode 100644 index 0000000000000000000000000000000000000000..ec3fe779fd57019ce5e63513960ddcfc33691e98 --- /dev/null +++ b/images/Shaft_04514.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baf4b29d5194169864f1c34947f31efe06141382c67fb5e2ef108bae22d47fb6 +size 76817 diff --git a/images/Shaft_04515.png b/images/Shaft_04515.png new file mode 100644 index 0000000000000000000000000000000000000000..ece6829a364e907398f64984108b91fca535b128 --- /dev/null +++ b/images/Shaft_04515.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a705c6bcca6ad83cdaff60aa4bd93bfd4d6f8453a99a60be7e00643f37bf1eed +size 84180 diff --git a/images/Shaft_04516.png b/images/Shaft_04516.png new file mode 100644 index 0000000000000000000000000000000000000000..d06cd20301ce81cef2c2c084a622fff4d806e5fb --- /dev/null +++ b/images/Shaft_04516.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb8d578dc4d7cc53edc214ea8d5377526240501b31c24953493c9c845f45c1a6 +size 80689 diff --git a/images/Shaft_04517.png b/images/Shaft_04517.png new file mode 100644 index 0000000000000000000000000000000000000000..e0d6aac86b608eb394f993ef248f1dbe550c2a79 --- /dev/null +++ b/images/Shaft_04517.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc5c0c9044e76c1bfa2d118c8cf10a7a1522d4f6815e839f11384d5b32aba4fe +size 75012 diff --git a/images/Shaft_04518.png b/images/Shaft_04518.png new file mode 100644 index 0000000000000000000000000000000000000000..e3d025ac60da3bef2eed84d7d1827ca466b551ab --- /dev/null +++ b/images/Shaft_04518.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36bab0e0976294898bf4926240794b13d9cb2b67faaf422f30bac2a76ef1a811 +size 111087 diff --git a/images/Shaft_04519.png b/images/Shaft_04519.png new file mode 100644 index 0000000000000000000000000000000000000000..9d14b2b873db182891dc21ba0eab5ae82209e617 --- /dev/null +++ b/images/Shaft_04519.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad2a4c3dc9649e3442bd0f42b4df29a7bb5164fd0477f2377bae92a91f627389 +size 107260 diff --git a/images/Shaft_04520.png b/images/Shaft_04520.png new file mode 100644 index 0000000000000000000000000000000000000000..0483cef5f457045416c67218a640b0b0ac128205 --- /dev/null +++ b/images/Shaft_04520.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a8a0dd06c3c373d4cb3d0d491bc72d88f956df86295201c6a774c7f4311cf7a +size 71839 diff --git a/images/Shaft_04521.png b/images/Shaft_04521.png new file mode 100644 index 0000000000000000000000000000000000000000..f5b9aad5255dc01b33a099396af68224d74d071a --- /dev/null +++ b/images/Shaft_04521.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81b6f744a2f778e533d6c67fe2b61dbd197471cee67ff5e1f0b76b5bd257b936 +size 103995 diff --git a/images/Shaft_04522.png b/images/Shaft_04522.png new file mode 100644 index 0000000000000000000000000000000000000000..9e104012d34e02c9973d12a393e2744d8e4b1824 --- /dev/null +++ b/images/Shaft_04522.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fce5b14d58ebf8631f69f1ce35aee810a7b595f062b3fd38ed4e7bad97e83045 +size 73280 diff --git a/images/Shaft_04523.png b/images/Shaft_04523.png new file mode 100644 index 0000000000000000000000000000000000000000..d24b9b044764208bb3c526cb2eae24e54f9402d8 --- /dev/null +++ b/images/Shaft_04523.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0febf53a34c67caea941c963d346aff1dcaa6d000b98fc582bec531b6935eefe +size 73826 diff --git a/images/Shaft_04524.png b/images/Shaft_04524.png new file mode 100644 index 0000000000000000000000000000000000000000..3fee53b922a3b05e92a862aca38995af3bb88bf2 --- /dev/null +++ b/images/Shaft_04524.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e8ee1c3fdbd78266a0a203b3da57af2d366e4047e0a5b2d01df0a4264e3782d0 +size 86539 diff --git a/images/Shaft_04525.png b/images/Shaft_04525.png new file mode 100644 index 0000000000000000000000000000000000000000..aeb3ea30ca82a8e7d59912826a9465106962c160 --- /dev/null +++ b/images/Shaft_04525.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc83438aef0f5acc9445739ebcb015895c7d06490d2ab60fc5d3375898e0eca2 +size 86027 diff --git a/images/Shaft_04526.png b/images/Shaft_04526.png new file mode 100644 index 0000000000000000000000000000000000000000..29bcfa55ac9036e83e5a300e112e9c2f24a86367 --- /dev/null +++ b/images/Shaft_04526.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:035f9a2150bdd58102fc0ca6925072c98bd11e9cb95f1dc969dd9184f12565bf +size 96017 diff --git a/images/Shaft_04527.png b/images/Shaft_04527.png new file mode 100644 index 0000000000000000000000000000000000000000..6cd1c1f6661c7f77582f02e6b1844948a46fab5c --- /dev/null +++ b/images/Shaft_04527.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c30633ecfeceb59b38bd627c0d27b0c020a00c70b9ee0cddceb1c10567b7cdcd +size 74648 diff --git a/images/Shaft_04528.png b/images/Shaft_04528.png new file mode 100644 index 0000000000000000000000000000000000000000..d079a0ba221e26fe3563569c440deca4e5138401 --- /dev/null +++ b/images/Shaft_04528.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21c961038a1d0596c6e27b77f4734ed88858c78767dad093a5518a589807ff7a +size 74242 diff --git a/images/Shaft_04529.png b/images/Shaft_04529.png new file mode 100644 index 0000000000000000000000000000000000000000..1d003c8af58a66cec6fc5a2347cbd0655b507771 --- /dev/null +++ b/images/Shaft_04529.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a4246f21400b05e0742089cc3372ed2a606aa2459f45d7c043f02c40041e2874 +size 69375 diff --git a/images/Shaft_04530.png b/images/Shaft_04530.png new file mode 100644 index 0000000000000000000000000000000000000000..141d7436eba13d5823c3eb903991e13d5fe387cd --- /dev/null +++ b/images/Shaft_04530.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55ce88bff90bbb74395f3347aab126f52b2a97dd5e50aa4ae6d88f96c9766bad +size 79692 diff --git a/images/Shaft_04531.png b/images/Shaft_04531.png new file mode 100644 index 0000000000000000000000000000000000000000..dd3fb1bd693f56151ddef1f2a2bbd21e3c49c805 --- /dev/null +++ b/images/Shaft_04531.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb4bead8479fe4433288cd2c9e101f94013824db1d8ac3be161574bc0934f22c +size 78624 diff --git a/images/Shaft_04532.png b/images/Shaft_04532.png new file mode 100644 index 0000000000000000000000000000000000000000..fdfdf520f83ef3fb315f2d40a91750159e7a4be5 --- /dev/null +++ b/images/Shaft_04532.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65b044fbbc33920cd0881bf7d3aac84be33af9a785888469b4192b31a3291bc5 +size 81097 diff --git a/images/Shaft_04533.png b/images/Shaft_04533.png new file mode 100644 index 0000000000000000000000000000000000000000..33cfa5793bdacacbbcd70a5c262a8621416cbe87 --- /dev/null +++ b/images/Shaft_04533.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f206ed481c3e941752168698b8e83c48d0afc4f567e86bad5c053bbe2d3e28c9 +size 105597 diff --git a/images/Shaft_04534.png b/images/Shaft_04534.png new file mode 100644 index 0000000000000000000000000000000000000000..d62a7f44917a2f995b1f92dd8b6d0ae18725f9eb --- /dev/null +++ b/images/Shaft_04534.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f45197cf27d2d328604f48415e37b2114a7d360258ee623df8056168fbdebec3 +size 83247 diff --git a/images/Shaft_04535.png b/images/Shaft_04535.png new file mode 100644 index 0000000000000000000000000000000000000000..78b8cc650ccd966d576f3308b82f9292cd9f76f3 --- /dev/null +++ b/images/Shaft_04535.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c48c09203093c769be20be26de3588aa8e786e34061760d99e51921385e39747 +size 97879 diff --git a/images/Shaft_04536.png b/images/Shaft_04536.png new file mode 100644 index 0000000000000000000000000000000000000000..e1db9f49760ab6bc31fb620cff000b2be9340d07 --- /dev/null +++ b/images/Shaft_04536.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b57a73745c8eb8d36a817888a27ce1552680ff1e8e8102a6a17489e9566a7882 +size 80012 diff --git a/images/Shaft_04537.png b/images/Shaft_04537.png new file mode 100644 index 0000000000000000000000000000000000000000..b88fcf91b688890010dd754e45f52036508f464c --- /dev/null +++ b/images/Shaft_04537.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd6f8ee3bba9a81384a71c4929c50d7a0e5b55b9681d789db16d16c941e47e54 +size 70409 diff --git a/images/Shaft_04538.png b/images/Shaft_04538.png new file mode 100644 index 0000000000000000000000000000000000000000..f0fa93d534a358ce78bc31f1576f3ee673fd2c0b --- /dev/null +++ b/images/Shaft_04538.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:563ec630439f940a55eb18b112a1246c23bb2fb984e772f3e067a6f31a92ccd4 +size 84083 diff --git a/images/Shaft_04539.png b/images/Shaft_04539.png new file mode 100644 index 0000000000000000000000000000000000000000..81bb7ee70d38cf7729fe3adeb46b161bc068e030 --- /dev/null +++ b/images/Shaft_04539.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e4ab495ad99e91b90d10e9b81b878d695aa3898850e8847062c5730dc6841a8f +size 84732 diff --git a/images/Shaft_04540.png b/images/Shaft_04540.png new file mode 100644 index 0000000000000000000000000000000000000000..b5f3db9bfa61c983f5554fab14b48f3a1bf2a3fb --- /dev/null +++ b/images/Shaft_04540.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:65e6059f8d3bc495dca7f92099345c889c08a3cd12fe6ce62327e9e39d064968 +size 94567 diff --git a/images/Shaft_04541.png b/images/Shaft_04541.png new file mode 100644 index 0000000000000000000000000000000000000000..12a2be47be12678154e94fbb3f5474e13f3f4f4c --- /dev/null +++ b/images/Shaft_04541.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02db45ec7430ba3151a47fef34139ef1ad48615f85399c8b65d7273db5dee9dd +size 69124 diff --git a/images/Shaft_04542.png b/images/Shaft_04542.png new file mode 100644 index 0000000000000000000000000000000000000000..b18c58c2e29e955093cbc23f200c6f092a270e5f --- /dev/null +++ b/images/Shaft_04542.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3224c73e1ada488fa2f3375d7797e33d15431d20eaec5c64acd0d232f336569 +size 70106 diff --git a/images/Shaft_04543.png b/images/Shaft_04543.png new file mode 100644 index 0000000000000000000000000000000000000000..d1609404fe64c43680a050b6ab981cfe39f3c20b --- /dev/null +++ b/images/Shaft_04543.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b82ae6e2c69861af9794cf200c7cba0fc8accd7ba8226ad9d5af8bb25281872 +size 100365 diff --git a/images/Shaft_04544.png b/images/Shaft_04544.png new file mode 100644 index 0000000000000000000000000000000000000000..51059677c4a67407b753c2829182483b44cc3402 --- /dev/null +++ b/images/Shaft_04544.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a223f9bedb91bb7d833a20d33768b0be01942b9243be00dd689943c8e921ab6 +size 103578 diff --git a/images/Shaft_04545.png b/images/Shaft_04545.png new file mode 100644 index 0000000000000000000000000000000000000000..c7dd6b511f18455067c11d63120109994293c8ee --- /dev/null +++ b/images/Shaft_04545.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aad326ba04098c399051f8060731ca70ea6d3fadae47535ba900b05212383766 +size 102232 diff --git a/images/Shaft_04546.png b/images/Shaft_04546.png new file mode 100644 index 0000000000000000000000000000000000000000..c589fc7396561ef2d030ce7e3ffef87c59aa5c16 --- /dev/null +++ b/images/Shaft_04546.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec7d16e5a0d34b5c2ba851f1aeed7cc02e76be5ca606053316f50a4ad2cbbfbf +size 84660 diff --git a/images/Shaft_04547.png b/images/Shaft_04547.png new file mode 100644 index 0000000000000000000000000000000000000000..98a4f28ca8f24a2f8591b2edb3fdc479f181529f --- /dev/null +++ b/images/Shaft_04547.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b707f9f063d6dfa710971b2f99189cf076ed109e97c7d3ccb95e1b3f2af6733 +size 85389 diff --git a/images/Shaft_04548.png b/images/Shaft_04548.png new file mode 100644 index 0000000000000000000000000000000000000000..e5637ee06003604b4af6d7a702f2f114f948d5a1 --- /dev/null +++ b/images/Shaft_04548.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d5425410d470dcbabb38e4055a505989e6e6fc7f5c1e83d4d6a5ce0f97cc3d7 +size 69159 diff --git a/images/Shaft_04549.png b/images/Shaft_04549.png new file mode 100644 index 0000000000000000000000000000000000000000..0823a028b1077fb1dd80556c3bcdabbd502ea5e6 --- /dev/null +++ b/images/Shaft_04549.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f7b984add1a8cda30dbad439500186328b246195dd2e62ccd6b01714d246e083 +size 86024 diff --git a/images/Shaft_04550.png b/images/Shaft_04550.png new file mode 100644 index 0000000000000000000000000000000000000000..b62e36114d63eec0d9ab3a871eaca759fff513f6 --- /dev/null +++ b/images/Shaft_04550.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e408d3629b194d7b47542144a30a2c239996282aad2cf005ee20329549e0b25 +size 83540 diff --git a/images/Shaft_04551.png b/images/Shaft_04551.png new file mode 100644 index 0000000000000000000000000000000000000000..3a7a09878d6c5a8687a7013a7a4208549d0fd49b --- /dev/null +++ b/images/Shaft_04551.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e30eeddb9f8f9760d8aaa2a625eadc8d2e03ccd0c88627ba75957891313535f0 +size 75822 diff --git a/images/Shaft_04552.png b/images/Shaft_04552.png new file mode 100644 index 0000000000000000000000000000000000000000..9580bc3f490affdda24a26c0099c3996d12dead3 --- /dev/null +++ b/images/Shaft_04552.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29b3f49ffa26ea181eb1c3a3b9573110c46bbfdb15f5d32431a6c038d34bc427 +size 70947 diff --git a/images/Shaft_04553.png b/images/Shaft_04553.png new file mode 100644 index 0000000000000000000000000000000000000000..5ed5975e11de470e850211ba92d6c2eb80de7373 --- /dev/null +++ b/images/Shaft_04553.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:693c5125eca6343b076a6588abad414eef9429faaa7c2e0dc2d90241c3f4514b +size 83421 diff --git a/images/Shaft_04554.png b/images/Shaft_04554.png new file mode 100644 index 0000000000000000000000000000000000000000..3a34018a05ef8d85702a05a69584ff4979d9dcf7 --- /dev/null +++ b/images/Shaft_04554.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d09a80db4587ffe04ed775da323688ccfda6acdfea58af673dde04ae225bd6cd +size 100584 diff --git a/images/Shaft_04555.png b/images/Shaft_04555.png new file mode 100644 index 0000000000000000000000000000000000000000..09cde3b0a23e8bb333317884a7e8d210b085a060 --- /dev/null +++ b/images/Shaft_04555.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a74087781cb713c266bf7b5ca48478bbd83acfa4f9e1cde9d0164a12ec9d105c +size 71195 diff --git a/images/Shaft_04556.png b/images/Shaft_04556.png new file mode 100644 index 0000000000000000000000000000000000000000..c076f35a4401309c86a07ef444ec038b21278827 --- /dev/null +++ b/images/Shaft_04556.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26b962fcfc314da253bdbdfb2036ba31a197e24db93d76aeabce3069feedea9a +size 91902 diff --git a/images/Shaft_04557.png b/images/Shaft_04557.png new file mode 100644 index 0000000000000000000000000000000000000000..9964c7c6be912697db37930645fceb36d12143f3 --- /dev/null +++ b/images/Shaft_04557.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eafc2752eaa0aed1e5b5c29d1bb94251a692a30a64b5b373d9c2ceed79857ec9 +size 71363 diff --git a/images/Shaft_04558.png b/images/Shaft_04558.png new file mode 100644 index 0000000000000000000000000000000000000000..24acc96212a7e7204cd27d34b5a529482aaffe52 --- /dev/null +++ b/images/Shaft_04558.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87c2ed4c08a1b817851f2de26eb64889cb89d0f932557ab5efecb9dd7491bc3a +size 99681 diff --git a/images/Shaft_04559.png b/images/Shaft_04559.png new file mode 100644 index 0000000000000000000000000000000000000000..9202a5669c998f5f1809d4d8559a69ba2183fa5b --- /dev/null +++ b/images/Shaft_04559.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1098002c22e84ca1440d042cc00a463b05fbe5b777f0b8d2efe9c93587815f7a +size 86800 diff --git a/images/Shaft_04560.png b/images/Shaft_04560.png new file mode 100644 index 0000000000000000000000000000000000000000..043d04d60fc38025a906620f53a0a4b319440621 --- /dev/null +++ b/images/Shaft_04560.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1efe161fa9b3fbc86fad34f78fd6329c08547cb88d4084f3ff89a7767a713bd3 +size 72940 diff --git a/images/Shaft_04561.png b/images/Shaft_04561.png new file mode 100644 index 0000000000000000000000000000000000000000..685f2c8fba8f6c73bbd90e17f0bc142baf126c20 --- /dev/null +++ b/images/Shaft_04561.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91378e547ba12954cf560d3f04ed40a9881f94bd14e735edfbfef8a3181d28ce +size 94236 diff --git a/images/Shaft_04562.png b/images/Shaft_04562.png new file mode 100644 index 0000000000000000000000000000000000000000..d823d61a88ee8736eabd1825220f4f7c5837d43e --- /dev/null +++ b/images/Shaft_04562.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:87f2d1e6b63861d610f70494430ec8b35f2c0bf82e9c3e7949cba7887eb4c1fc +size 79391 diff --git a/images/Shaft_04563.png b/images/Shaft_04563.png new file mode 100644 index 0000000000000000000000000000000000000000..1ec4aea67c4f234568b6ae47dbba45412f58cec4 --- /dev/null +++ b/images/Shaft_04563.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c186c813518bb33fff7481d93f902ebfcfbcaa1d710f2e8c2ef304a73e18133 +size 94938 diff --git a/images/Shaft_04564.png b/images/Shaft_04564.png new file mode 100644 index 0000000000000000000000000000000000000000..3145cebf0544a535bbdfd8513d82331055819bdd --- /dev/null +++ b/images/Shaft_04564.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:720a79b03f92a13431a39c22ccd61b2fa1a1cfc392c60d97be8d3f71189a62fe +size 78755 diff --git a/images/Shaft_04565.png b/images/Shaft_04565.png new file mode 100644 index 0000000000000000000000000000000000000000..723b76e0bf846fa0001a184bdfeeca8edde738b9 --- /dev/null +++ b/images/Shaft_04565.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ce4ac334ec6bf6d6d0c47ee63bc209064d3151b6da50570485e991261e84af1 +size 71090 diff --git a/images/Shaft_04566.png b/images/Shaft_04566.png new file mode 100644 index 0000000000000000000000000000000000000000..b9273f9b6873685ef9cf4ef6c83fca5e50744a08 --- /dev/null +++ b/images/Shaft_04566.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a3f9269be631f16b07d1dc7d5f31babaac5344847a4c45d47bc09fdad06c629d +size 74475 diff --git a/images/Shaft_04567.png b/images/Shaft_04567.png new file mode 100644 index 0000000000000000000000000000000000000000..9432848cfa5cd1f38b4c195205b66e10cdaf5549 --- /dev/null +++ b/images/Shaft_04567.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:469a85d2a799e28785276cb508934a5c1e1d311479c9cfe55a5b90f71c8eecc6 +size 82492 diff --git a/images/Shaft_04568.png b/images/Shaft_04568.png new file mode 100644 index 0000000000000000000000000000000000000000..54dd93136cd7c34af57512f69f8bfaacd470cddf --- /dev/null +++ b/images/Shaft_04568.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2f56bb26a3fbd935267c27b44651ff1b33206feea54a740de320a27cddbe568f +size 100944 diff --git a/images/Shaft_04569.png b/images/Shaft_04569.png new file mode 100644 index 0000000000000000000000000000000000000000..b938f69efca95c6f05e34abb951baa4bb5fba5ca --- /dev/null +++ b/images/Shaft_04569.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:25da245c04b2d54bb8c1d1455a5226a9290229e90af8564ffa265c0ceeb0962b +size 97011 diff --git a/images/Shaft_04570.png b/images/Shaft_04570.png new file mode 100644 index 0000000000000000000000000000000000000000..3ef49bd14c5bcaeb138716ca2c1359aa2dead4af --- /dev/null +++ b/images/Shaft_04570.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8db170c94c6bc4c290f3142c8790f3afbb449d94be4d39fa3b50ecce75cc8ad4 +size 95215 diff --git a/images/Shaft_04571.png b/images/Shaft_04571.png new file mode 100644 index 0000000000000000000000000000000000000000..d027331357a4f58e21f953e73eca0176f141498f --- /dev/null +++ b/images/Shaft_04571.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4de4ed0ab138a336bc6ceb52cfb3d964a2e4f445a3d18ba8503c9d834b6593a7 +size 77517 diff --git a/images/Shaft_04572.png b/images/Shaft_04572.png new file mode 100644 index 0000000000000000000000000000000000000000..10fa565d3fcc56b56f5745cc64cde0434532828f --- /dev/null +++ b/images/Shaft_04572.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:36a30a94661b12b02f0fde95d6205f67bf65ed0639700ab54c5959f7398f35b5 +size 76858 diff --git a/images/Shaft_04573.png b/images/Shaft_04573.png new file mode 100644 index 0000000000000000000000000000000000000000..0fa2af77292d7643ee7bfdd046d7a452417f6d9c --- /dev/null +++ b/images/Shaft_04573.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8f7a7684b4613011f4a35f707307da64850750d46ba930d452abf3dcc16b05c7 +size 105852 diff --git a/images/Shaft_04574.png b/images/Shaft_04574.png new file mode 100644 index 0000000000000000000000000000000000000000..0ea9eb2079662b2c09a9615879ce29c59ff6b8c5 --- /dev/null +++ b/images/Shaft_04574.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e18c9111281bf78b078260cbf9562057504bb9d292369d8cab087dd5f145fc1 +size 76990 diff --git a/images/Shaft_04575.png b/images/Shaft_04575.png new file mode 100644 index 0000000000000000000000000000000000000000..b34f951abb543ae373db5b17d9fbcc3112d01497 --- /dev/null +++ b/images/Shaft_04575.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a62f35629e1c381ee145b79815dc8be2cc194e05f24d62fbc955c2eff5e8fca +size 102802 diff --git a/images/Shaft_04576.png b/images/Shaft_04576.png new file mode 100644 index 0000000000000000000000000000000000000000..9a51dadbafe2f99ae17be8231b5d27bb38370668 --- /dev/null +++ b/images/Shaft_04576.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9158b75e45731df9f62382b0cbb82723c4bdf1a2ada7501c02a57be4bb856abc +size 80755 diff --git a/images/Shaft_04577.png b/images/Shaft_04577.png new file mode 100644 index 0000000000000000000000000000000000000000..ac3157161a7aae89afde2af1503acdd8c3e55ff4 --- /dev/null +++ b/images/Shaft_04577.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d8895c8a850142d1278783831f5a517ef66b9211526abe777744ac0d95330d3 +size 81840 diff --git a/images/Shaft_04578.png b/images/Shaft_04578.png new file mode 100644 index 0000000000000000000000000000000000000000..7f64ce432589a6825d025bea290eb8b38f985490 --- /dev/null +++ b/images/Shaft_04578.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d4bea296f599e128c2ff105d00adf8b3d4214e609fd296263c36e9fc688ea3d +size 72026 diff --git a/images/Shaft_04579.png b/images/Shaft_04579.png new file mode 100644 index 0000000000000000000000000000000000000000..11d7d6762b05114512262da012a801eb859a5b41 --- /dev/null +++ b/images/Shaft_04579.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:790489c65aeed0abb76f43a7f6df20661e53a3b174273797f0087e6cd21c1566 +size 104132 diff --git a/images/Shaft_04580.png b/images/Shaft_04580.png new file mode 100644 index 0000000000000000000000000000000000000000..8b67f3758f183c5240d18bddb477e220818375ce --- /dev/null +++ b/images/Shaft_04580.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94bea60da4245037a2ce7ad96c0e50f5a3e00318756d9b7e06531be45170aa70 +size 90500 diff --git a/images/Shaft_04581.png b/images/Shaft_04581.png new file mode 100644 index 0000000000000000000000000000000000000000..211e64ead72d800a3f8a34045b9c5fd8c398b895 --- /dev/null +++ b/images/Shaft_04581.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b6031e4980fa6bf8a01939aed0976a25e09f5c21fa18b86b29d9227a1e2243c +size 70972 diff --git a/images/Shaft_04582.png b/images/Shaft_04582.png new file mode 100644 index 0000000000000000000000000000000000000000..68d723f8ec1373a3982ea1b68bde1206088caedb --- /dev/null +++ b/images/Shaft_04582.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9195d08829b3eb7e636da96446523cdbc3dc6e4bb915a4268f8c711324b36761 +size 80173 diff --git a/images/Shaft_04583.png b/images/Shaft_04583.png new file mode 100644 index 0000000000000000000000000000000000000000..c309c42a5a631f254d61d30bc94c6d55b1d0e595 --- /dev/null +++ b/images/Shaft_04583.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d605311c01399515260bfe2c786d98755d8bbb260235364d3d08911287999bad +size 72268 diff --git a/images/Shaft_04584.png b/images/Shaft_04584.png new file mode 100644 index 0000000000000000000000000000000000000000..e54bddb97ef2fbcae20b7835614fbf9596de6093 --- /dev/null +++ b/images/Shaft_04584.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:134fe59d47fe0b658f144635f683568177795d7421f26d2bef46300200e3c22f +size 97066 diff --git a/images/Shaft_04585.png b/images/Shaft_04585.png new file mode 100644 index 0000000000000000000000000000000000000000..5800ba122d58bb98433ce4208dbe0e355deed288 --- /dev/null +++ b/images/Shaft_04585.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dbd343bc997b314aedf26473e7f32ba77888c26cb1cf219e47cc928b954707e4 +size 89725 diff --git a/images/Shaft_04586.png b/images/Shaft_04586.png new file mode 100644 index 0000000000000000000000000000000000000000..8e7cd542e1c93ccae89cf71bf7b963f9f708fef9 --- /dev/null +++ b/images/Shaft_04586.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c3dd8ae5506a6f987ad03ecb4fce00d85ac7fec731cc06f988598fef916f9cf +size 76392 diff --git a/images/Shaft_04587.png b/images/Shaft_04587.png new file mode 100644 index 0000000000000000000000000000000000000000..a642dcdb7c8718377e3efbffe61b2f3fae9f9a5c --- /dev/null +++ b/images/Shaft_04587.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6cae5b0da595a7a9faaaaba58542b2ec69cece28a80d941c80d778e8dae4d3d5 +size 109850 diff --git a/images/Shaft_04588.png b/images/Shaft_04588.png new file mode 100644 index 0000000000000000000000000000000000000000..9fddb1c5f71623ffbcc39a15aadc6c9d5cfbe52d --- /dev/null +++ b/images/Shaft_04588.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc9fe9bd5407721c4ba8c5c3e9dd7b3c94f989ca5a9d15975243a860f2e66632 +size 75676 diff --git a/images/Shaft_04589.png b/images/Shaft_04589.png new file mode 100644 index 0000000000000000000000000000000000000000..eb0f6a81792bf49e7d2a798a571d88aefdf8b051 --- /dev/null +++ b/images/Shaft_04589.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1e46239b2c475dcfba67d422c29a816c9bd791ea9062d77a922fd9093d982fdd +size 84703 diff --git a/images/Shaft_04590.png b/images/Shaft_04590.png new file mode 100644 index 0000000000000000000000000000000000000000..4b4130594c028280f1b1eaf5d27401f4b2d29320 --- /dev/null +++ b/images/Shaft_04590.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12974363f33241ce80495c3732175e8d48c027c41a6cfcedcd95deb5f82b1076 +size 79329 diff --git a/images/Shaft_04591.png b/images/Shaft_04591.png new file mode 100644 index 0000000000000000000000000000000000000000..4c863280abc0bbb4faefcbd40ddf1f8125936751 --- /dev/null +++ b/images/Shaft_04591.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb396d9d46daeef126cb7a8253ceaeaa001110ec18d3bd7fa43274e1411e6864 +size 72874 diff --git a/images/Shaft_04592.png b/images/Shaft_04592.png new file mode 100644 index 0000000000000000000000000000000000000000..3a3c71f824e139eeedbf172a8804818bb24900e7 --- /dev/null +++ b/images/Shaft_04592.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:168c241747ae77405915f822891cb6013f4cc942e3d1f024eb6db737ff146f8a +size 93585 diff --git a/images/Shaft_04593.png b/images/Shaft_04593.png new file mode 100644 index 0000000000000000000000000000000000000000..776210984b71cb1984c864a22490517a23011e8d --- /dev/null +++ b/images/Shaft_04593.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb902398527233a45efa38fa53bfc5be493b0d56f48dd17134d11912d2601b82 +size 75467 diff --git a/images/Shaft_04594.png b/images/Shaft_04594.png new file mode 100644 index 0000000000000000000000000000000000000000..1c622b2f9fe9aaa58567306de4750ddd01d35beb --- /dev/null +++ b/images/Shaft_04594.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cc3e240ea7cbc434127dd4c98bd1de3e8ae6438e1614a5907a1f65a653011bd +size 83475 diff --git a/images/Shaft_04595.png b/images/Shaft_04595.png new file mode 100644 index 0000000000000000000000000000000000000000..63546e0521c840e66fee23c78bb83aa61f627191 --- /dev/null +++ b/images/Shaft_04595.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d4b618ceaa12a5b8850216a6880e55cb48d5de8af5b13ea8865cfa3e077cdd0c +size 88988 diff --git a/images/Shaft_04596.png b/images/Shaft_04596.png new file mode 100644 index 0000000000000000000000000000000000000000..14777b59dde2eef126593a7de74f4bb70ddca7e9 --- /dev/null +++ b/images/Shaft_04596.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4292508ddab5b478c7dc9df6e89eb90756c2926a94a8cb985238a6a463d7bb1b +size 81861 diff --git a/images/Shaft_04597.png b/images/Shaft_04597.png new file mode 100644 index 0000000000000000000000000000000000000000..a9596d231b0c3a04d963a0d6ab27468a7b0d3507 --- /dev/null +++ b/images/Shaft_04597.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab736964638c37f263b75f0368adbd933a11cc2c19bc5f2df50724110ee76a02 +size 82821 diff --git a/images/Shaft_04598.png b/images/Shaft_04598.png new file mode 100644 index 0000000000000000000000000000000000000000..e9835f0718f080d7da7bb2d8ebb7fd8e44f48956 --- /dev/null +++ b/images/Shaft_04598.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15defc4ab57175cc45727ed693191dc61c5403e543ebe7fe67c672e5340747e9 +size 90366 diff --git a/images/Shaft_04599.png b/images/Shaft_04599.png new file mode 100644 index 0000000000000000000000000000000000000000..41c673f6b2424d5b756617d9b2669c33a2c0654b --- /dev/null +++ b/images/Shaft_04599.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bde6835dddc9f64e982319a0d993ba85ba2c11b96e604c449c46adefea7fb93f +size 91543 diff --git a/images/Shaft_04600.png b/images/Shaft_04600.png new file mode 100644 index 0000000000000000000000000000000000000000..5acc82345085feb49707e16b167edef7d9bfcb2a --- /dev/null +++ b/images/Shaft_04600.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b03638da24ab5abff5f061a8703fac50ce44e05582478f2804e53c9c9d900d3 +size 92496 diff --git a/images/Shaft_04601.png b/images/Shaft_04601.png new file mode 100644 index 0000000000000000000000000000000000000000..7d7afcb1e2965fbdb62e9c6b9261bf60762db1d2 --- /dev/null +++ b/images/Shaft_04601.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b8df3d5d03e85d65be58ba64b84023738ebe1cf2d488cddec557591c46131ef +size 100267 diff --git a/images/Shaft_04602.png b/images/Shaft_04602.png new file mode 100644 index 0000000000000000000000000000000000000000..92c59865b837614f4c382fc3d22c0127dacc26bc --- /dev/null +++ b/images/Shaft_04602.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:99095b4bf79348d804e5fa681400b2525c6df59237ed26183b96b2d0f3e62c78 +size 88510 diff --git a/images/Shaft_04603.png b/images/Shaft_04603.png new file mode 100644 index 0000000000000000000000000000000000000000..5633a80d76b281f7cb7e5c6d833a2c895f62ebf0 --- /dev/null +++ b/images/Shaft_04603.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3ce151074897cff746f5d09947109d5ebf74efb3b55e1def42f2c96bf7b6030 +size 102262 diff --git a/images/Shaft_04604.png b/images/Shaft_04604.png new file mode 100644 index 0000000000000000000000000000000000000000..cd2e6defad538cf65823e42330059cdecb9befee --- /dev/null +++ b/images/Shaft_04604.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5ef220dd095e2f6167f911ac85146409c300da48c8a463bbab9a09283c23a382 +size 94879 diff --git a/images/Shaft_04605.png b/images/Shaft_04605.png new file mode 100644 index 0000000000000000000000000000000000000000..510fc9609cc4e69ebf409327136263ae36e06d16 --- /dev/null +++ b/images/Shaft_04605.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab03295841641cd3a9c0fa99df847d477ad3975fcd78f4b2a2d2cd907e03d41e +size 87822 diff --git a/images/Shaft_04606.png b/images/Shaft_04606.png new file mode 100644 index 0000000000000000000000000000000000000000..96a60d88ebfe6a5fdf4c2b303c705ab114633922 --- /dev/null +++ b/images/Shaft_04606.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23436a28e51b4200520d9a761a3c2b49a35f672aef34b24b38d2fd0e9d3174f7 +size 99429 diff --git a/images/Shaft_04607.png b/images/Shaft_04607.png new file mode 100644 index 0000000000000000000000000000000000000000..83261c48fbe334f49f0afd608c70fdda18151f7b --- /dev/null +++ b/images/Shaft_04607.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f8349755413300be533abdb68b383bf8f7fac8ef81a3df1465dfd9ff769323f1 +size 95312 diff --git a/images/Shaft_04608.png b/images/Shaft_04608.png new file mode 100644 index 0000000000000000000000000000000000000000..714299d37a197b88f65b162decf4b8e6e9a182d9 --- /dev/null +++ b/images/Shaft_04608.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3edd03fd732e9c8875e2da470481a788d9d67005d9956e18fec36ea72bb23ac +size 105210 diff --git a/images/Shaft_04609.png b/images/Shaft_04609.png new file mode 100644 index 0000000000000000000000000000000000000000..63a5bdc3a7d6f5086c41c582be188ce18896d5f4 --- /dev/null +++ b/images/Shaft_04609.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e135e073428b4e95209e987e5ed137026fa4a5e529045afaafb210b82f7b3d10 +size 94130 diff --git a/images/Shaft_04610.png b/images/Shaft_04610.png new file mode 100644 index 0000000000000000000000000000000000000000..1b5ba87b029532cbe90e8d38ad52c210f03c6926 --- /dev/null +++ b/images/Shaft_04610.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3abd1c7ece0a01fefb65e9c4789e316dd0d3bd721c85ab6f9b2065dc6da83872 +size 81890 diff --git a/images/Shaft_04611.png b/images/Shaft_04611.png new file mode 100644 index 0000000000000000000000000000000000000000..05d52f44e98d617b0495c6c2293cedbe2fa7ba42 --- /dev/null +++ b/images/Shaft_04611.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b712a5f232f84b3e8b531597f6d9023e6bb7fde6f43c3622eaec74a65935d3b7 +size 89616 diff --git a/images/Shaft_04612.png b/images/Shaft_04612.png new file mode 100644 index 0000000000000000000000000000000000000000..a7aeae5ebf8ede3583ca04eab60bff4bcefed671 --- /dev/null +++ b/images/Shaft_04612.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e43aeb168fd25ba44c24a717813c58afba6c952af32b500d8e66de443120bcda +size 79134 diff --git a/images/Shaft_04613.png b/images/Shaft_04613.png new file mode 100644 index 0000000000000000000000000000000000000000..f621e79b068be8cbb948b6d36ec60910df958356 --- /dev/null +++ b/images/Shaft_04613.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cdc7700fbd239c05e668547e40a5e40b680d581d3c70a84fc5b5cc645519b3ee +size 96125 diff --git a/images/Shaft_04614.png b/images/Shaft_04614.png new file mode 100644 index 0000000000000000000000000000000000000000..52fc23f129255abb702d1cc568fff41288fdb715 --- /dev/null +++ b/images/Shaft_04614.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:12ec79531ffca6ff92e875ebcb4f3c526b8c6a63bcba421d613d0a8420ef54df +size 88947 diff --git a/images/Shaft_04615.png b/images/Shaft_04615.png new file mode 100644 index 0000000000000000000000000000000000000000..4012f11c2153f3f883c946ad5462c732f84e3651 --- /dev/null +++ b/images/Shaft_04615.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8badbde3e302cf15ebed321c5bb36f37426338420451ae3dafe222ae6816cd86 +size 90769 diff --git a/images/Shaft_04616.png b/images/Shaft_04616.png new file mode 100644 index 0000000000000000000000000000000000000000..265de7a941dcbbb099ef4bec7dc54ced384d6cdc --- /dev/null +++ b/images/Shaft_04616.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29eb2752fe7fff3a3b101a6dc9ccae2f694a1ce018b88f6c920f91684f7e7b69 +size 71782 diff --git a/images/Shaft_04617.png b/images/Shaft_04617.png new file mode 100644 index 0000000000000000000000000000000000000000..1c6a14a917d5dd45e77358b880bce630d0b002bc --- /dev/null +++ b/images/Shaft_04617.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:15888fb094be06ea6137458883ced0f76795b3744e3272b6fd7d3cb0d737e054 +size 85918 diff --git a/images/Shaft_04618.png b/images/Shaft_04618.png new file mode 100644 index 0000000000000000000000000000000000000000..06ddfeda475b8593d4edb1301e34372d208aa2a7 --- /dev/null +++ b/images/Shaft_04618.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b5ee397df5cb4fdaf2eba3043fe637b2a642b9e66e92506a39d7ed93825b436 +size 107157 diff --git a/images/Shaft_04619.png b/images/Shaft_04619.png new file mode 100644 index 0000000000000000000000000000000000000000..249eade950f7930f6ce64eaef78d4ed35bc2309b --- /dev/null +++ b/images/Shaft_04619.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:50fa49e16b715e0649a5a4fe7938fe584a697f02c3d2764f1768e40af9e666af +size 69645 diff --git a/images/Shaft_04620.png b/images/Shaft_04620.png new file mode 100644 index 0000000000000000000000000000000000000000..23198b13d4f4f1870209cae262ed8c673ef461e4 --- /dev/null +++ b/images/Shaft_04620.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84ab23d8a0d319d4cea0a1e46bc74c6aa1d42a44af243b63a6d6740b29558ea5 +size 82169 diff --git a/images/Shaft_04621.png b/images/Shaft_04621.png new file mode 100644 index 0000000000000000000000000000000000000000..37c6d90be67d5bf488d5dee119d89a5fea342648 --- /dev/null +++ b/images/Shaft_04621.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ca5a4f81606b6c6484e66b1061ed85ae73ef571372e573913deccfdccdfb64a0 +size 74550 diff --git a/images/Shaft_04622.png b/images/Shaft_04622.png new file mode 100644 index 0000000000000000000000000000000000000000..aa1ce7886cd9c2dd6369dc117c666a02fc5abc73 --- /dev/null +++ b/images/Shaft_04622.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:baa85fa4014e9b72fc87b12e9d2ae8024b74e92fb09005688b00204848783ae2 +size 71761 diff --git a/images/Shaft_04623.png b/images/Shaft_04623.png new file mode 100644 index 0000000000000000000000000000000000000000..42bd5cd7c1c4dec9eafa0465fc4d63eb2f850f1f --- /dev/null +++ b/images/Shaft_04623.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:68114a4d7761148dea4b1827c611618d8158a53c71b740f796c47b6cb5d00996 +size 103578 diff --git a/images/Shaft_04624.png b/images/Shaft_04624.png new file mode 100644 index 0000000000000000000000000000000000000000..b9948da38c1affb4c93bded95caf6e0cc0f3840a --- /dev/null +++ b/images/Shaft_04624.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e78907479fffc1514a174b157e2268d9d7ff3f4bb292e0e3f5d0faf5c09f4574 +size 101434 diff --git a/images/Shaft_04625.png b/images/Shaft_04625.png new file mode 100644 index 0000000000000000000000000000000000000000..9533e1ec91bf44711ad4cd52ce1bb3a9117a43bd --- /dev/null +++ b/images/Shaft_04625.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb59b120f504f4efb92a95005e80f12d162645a7bfec412bc94ae30993b8b4b6 +size 72670 diff --git a/images/Shaft_04626.png b/images/Shaft_04626.png new file mode 100644 index 0000000000000000000000000000000000000000..5b8995b8c9ae95bac3d4cc469939e9726919e549 --- /dev/null +++ b/images/Shaft_04626.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3865ffa4f79e3c50fbd9a1d3d70f4fc14e0fd2b53c20019447607c061b6d46d7 +size 104780 diff --git a/images/Shaft_04627.png b/images/Shaft_04627.png new file mode 100644 index 0000000000000000000000000000000000000000..c3ea6ad02c293daab96cda873e19249464558842 --- /dev/null +++ b/images/Shaft_04627.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:69fdbec9efcefa3d9aed2eecdb3a51d60038f66b872f35b70113bdd8aef358da +size 69363 diff --git a/images/Shaft_04628.png b/images/Shaft_04628.png new file mode 100644 index 0000000000000000000000000000000000000000..9a6bb539fa1e7110ffd696006204db6b128b4d04 --- /dev/null +++ b/images/Shaft_04628.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cb65b9e2fcd60573ccae500c2e646235af94dd615194a39c050929fa8de7783 +size 85302 diff --git a/images/Shaft_04629.png b/images/Shaft_04629.png new file mode 100644 index 0000000000000000000000000000000000000000..7330c25758d07fb76306c4bb609d59f71e445a2a --- /dev/null +++ b/images/Shaft_04629.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fddaa7977e150039aa8d0c4b01ff71ff8c6908533e5ec5fbdc6e9fb7738fcebc +size 79558 diff --git a/images/Shaft_04630.png b/images/Shaft_04630.png new file mode 100644 index 0000000000000000000000000000000000000000..1326366d2521b6882cde47055257ddcacd999c3d --- /dev/null +++ b/images/Shaft_04630.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be58527184b68ad22ffa3ee9e171c06d94c43f9f63f3b7aa7e0368b6d4496454 +size 88159 diff --git a/images/Shaft_04631.png b/images/Shaft_04631.png new file mode 100644 index 0000000000000000000000000000000000000000..1ef47853a1b4b3f1fcc521f4b01f551ade84e11b --- /dev/null +++ b/images/Shaft_04631.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d27f0cbcb949f26b2d7d70ad5beb99e0534ed24382caea6e98b6fc5e0ec8dab +size 75252 diff --git a/images/Shaft_04632.png b/images/Shaft_04632.png new file mode 100644 index 0000000000000000000000000000000000000000..eb9d11f90498b489b3d51b9fdb2fde0f8b808561 --- /dev/null +++ b/images/Shaft_04632.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecc7c0660b0b2ac0759411b69a2f83cd503752a8589afce536b282f3923d10ff +size 83740 diff --git a/images/Shaft_04633.png b/images/Shaft_04633.png new file mode 100644 index 0000000000000000000000000000000000000000..5d5f8a3feb6a26f5c745d97ee199994986fe230f --- /dev/null +++ b/images/Shaft_04633.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf9e179763071d56b946130503a54043026fdd1fe1726410a8990f642db6a293 +size 107916 diff --git a/images/Shaft_04634.png b/images/Shaft_04634.png new file mode 100644 index 0000000000000000000000000000000000000000..381e78c16ad10708c318d407c952efa43d6cfac0 --- /dev/null +++ b/images/Shaft_04634.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6addb59db2de490d4d62d5047e0f4db63030a94875002d73043de46269a1dbbe +size 71737 diff --git a/images/Shaft_04635.png b/images/Shaft_04635.png new file mode 100644 index 0000000000000000000000000000000000000000..edbc1d7f855d58b6b3330348934b6636fb357cca --- /dev/null +++ b/images/Shaft_04635.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf15062f07a7e7f4e48b85153c48fce3bb207693568bfcaf3110f59f08ee263b +size 98925 diff --git a/images/Shaft_04636.png b/images/Shaft_04636.png new file mode 100644 index 0000000000000000000000000000000000000000..e3ee54115081a538e38d169f5738e74a4b5ad4d8 --- /dev/null +++ b/images/Shaft_04636.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c12cc0407ebda24e904ae7c9716ea9d665f1eb664d3574544f46d357e3ff8a42 +size 76089 diff --git a/images/Shaft_04637.png b/images/Shaft_04637.png new file mode 100644 index 0000000000000000000000000000000000000000..de97d9c3d629448d5390f22914cbdd4c5e6523dc --- /dev/null +++ b/images/Shaft_04637.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d7e82ca788fcfe25054293667ba1cfb9ee04bfc8757c84b839473d29cce1b0d +size 81647 diff --git a/images/Shaft_04638.png b/images/Shaft_04638.png new file mode 100644 index 0000000000000000000000000000000000000000..56b4be0b6a8a05d8872f11dd82d078214e86da6d --- /dev/null +++ b/images/Shaft_04638.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0dff78e12d08fa500aba6108ef3225c9eff319f244b410853291da0bb0526990 +size 75047 diff --git a/images/Shaft_04639.png b/images/Shaft_04639.png new file mode 100644 index 0000000000000000000000000000000000000000..bacad052723ba2b7367896bd49cd8177df3720b1 --- /dev/null +++ b/images/Shaft_04639.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d40262566f439ff4708461cce16b29d9b05536e9e37a40bad612b11674a2f8b +size 70604 diff --git a/images/Shaft_04640.png b/images/Shaft_04640.png new file mode 100644 index 0000000000000000000000000000000000000000..3690eabf0932cd0f2be1aab625a0b9b88d4ce1ae --- /dev/null +++ b/images/Shaft_04640.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3724fa7b5cd1408f173709ab8f27edfac14f520fb7d2530b2079308deea4b995 +size 98303 diff --git a/images/Shaft_04641.png b/images/Shaft_04641.png new file mode 100644 index 0000000000000000000000000000000000000000..35a5595bbe9724be8496cdc52a3ae9ec8710dbe7 --- /dev/null +++ b/images/Shaft_04641.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a958d3822d0488d1f7562b3406de60d7c3e5c9a91d3d35af9e351d9769e62896 +size 80053 diff --git a/images/Shaft_04642.png b/images/Shaft_04642.png new file mode 100644 index 0000000000000000000000000000000000000000..58cc8089232841e412dcda664cde2e421a45f5ca --- /dev/null +++ b/images/Shaft_04642.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a03299ab9de50f6cec5f8ec8d52fce4123ee4bd490c73fff747985b18fcf4c9 +size 80143 diff --git a/images/Shaft_04643.png b/images/Shaft_04643.png new file mode 100644 index 0000000000000000000000000000000000000000..3c3a82ff09079dae28038d584fc4abb2b3576f99 --- /dev/null +++ b/images/Shaft_04643.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:db678e504b8f868776f4415366d77a31ec969d8f9ec331bfe93a13de1c2603c6 +size 95049 diff --git a/images/Shaft_04644.png b/images/Shaft_04644.png new file mode 100644 index 0000000000000000000000000000000000000000..fde54a6ba2e71dc7a4b9ac68478caac89720562d --- /dev/null +++ b/images/Shaft_04644.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df082277ea70c82d3bc78d094a118d1a91e3200afd3d8fe8f137170fdbd15dd8 +size 91363 diff --git a/images/Shaft_04645.png b/images/Shaft_04645.png new file mode 100644 index 0000000000000000000000000000000000000000..5ea567b2cab21585bf22941e49f78e90969927d9 --- /dev/null +++ b/images/Shaft_04645.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f20f979cf06a1cbd4389c511e0c82a5c782ceeb5c9253185c3c10e886691232a +size 86059 diff --git a/images/Shaft_04646.png b/images/Shaft_04646.png new file mode 100644 index 0000000000000000000000000000000000000000..2af4e482714d6c75e36e70072f58e26570bafbd1 --- /dev/null +++ b/images/Shaft_04646.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:08f05d892fd8db680d522298c6d093a8ba7eb5a8fcf05c6394fe5a9128698050 +size 91697 diff --git a/images/Shaft_04647.png b/images/Shaft_04647.png new file mode 100644 index 0000000000000000000000000000000000000000..ca84c95d3677962f478c87423705ecf982aee62b --- /dev/null +++ b/images/Shaft_04647.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a1aaa94efa96dd834cf51b76d60947461c2bf89198bf2eee882e40647f653b7 +size 72992 diff --git a/images/Shaft_04648.png b/images/Shaft_04648.png new file mode 100644 index 0000000000000000000000000000000000000000..9afee945167909188e700f646036c1d93c8f98af --- /dev/null +++ b/images/Shaft_04648.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17d35b0fdc7c0bf9113c4c03bdee7a45df5337c197a2d575a568b02f275e266f +size 69417 diff --git a/images/Shaft_04649.png b/images/Shaft_04649.png new file mode 100644 index 0000000000000000000000000000000000000000..a1d8ff5218565d751df00d944ae3bb2e580a9b7d --- /dev/null +++ b/images/Shaft_04649.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ee0c509a61f678932f40f510302662a53aa12b59cff8ce1f6a3a47e1ddcc7ad +size 76003 diff --git a/images/Shaft_04650.png b/images/Shaft_04650.png new file mode 100644 index 0000000000000000000000000000000000000000..a2214774d8a22e96e858ce4067b222e23e84edcd --- /dev/null +++ b/images/Shaft_04650.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be791f16a124087dc4b1fea186c72ebe3f43a81a7c0f23557f0f3f3df4d1162f +size 71355 diff --git a/images/Shaft_04651.png b/images/Shaft_04651.png new file mode 100644 index 0000000000000000000000000000000000000000..add310aa43ccd75257830877131360bb6f18729c --- /dev/null +++ b/images/Shaft_04651.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:704da4b0df2c763097955181867233c6c98e6515716a79b0a15986584e9fb9b6 +size 82531 diff --git a/images/Shaft_04652.png b/images/Shaft_04652.png new file mode 100644 index 0000000000000000000000000000000000000000..6eb21c0c99b81219478ee9b95cb6042e07c014dc --- /dev/null +++ b/images/Shaft_04652.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:926715eeef725f296400dcbe679c757d4439f3b7773ba45ce3d0e14aa97917ef +size 80811 diff --git a/images/Shaft_04653.png b/images/Shaft_04653.png new file mode 100644 index 0000000000000000000000000000000000000000..a7f17309898743806d02298a6a80c23e1b3982e9 --- /dev/null +++ b/images/Shaft_04653.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86c70eec11f20085cb96259b57ecbaa560c3a50669cc6bead52aba3f8324c5ca +size 83320 diff --git a/images/Shaft_04654.png b/images/Shaft_04654.png new file mode 100644 index 0000000000000000000000000000000000000000..9707a2aafc87bb768467842b544bcb401482926e --- /dev/null +++ b/images/Shaft_04654.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d1bb41c206110cbdf092d7574073aa8e0fc3f70835f6cac347cb840608888f0 +size 75038 diff --git a/images/Shaft_04655.png b/images/Shaft_04655.png new file mode 100644 index 0000000000000000000000000000000000000000..86a0ef79ba52ba09ebea14d2315d9ed94b3800bd --- /dev/null +++ b/images/Shaft_04655.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:40e6fd9b5e8ef00b4404e93ef3fa6c9cd93135e0bda862bfd22a0ab4d34d29e8 +size 88941 diff --git a/images/Shaft_04656.png b/images/Shaft_04656.png new file mode 100644 index 0000000000000000000000000000000000000000..b654c997f48e773d6d83086699d0f728a4dd260f --- /dev/null +++ b/images/Shaft_04656.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:057dfb7708f5866b9bdae51b7929bbc9a212a8f842ce1b677e8895d1747c4656 +size 74656 diff --git a/images/Shaft_04657.png b/images/Shaft_04657.png new file mode 100644 index 0000000000000000000000000000000000000000..31dfe0aa8c16392dbed3d54ea5afc924ade8b100 --- /dev/null +++ b/images/Shaft_04657.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8b0748aff4cad38a4d0c9ae19de454f4e25a83bf03866355c3397749d725158d +size 77846 diff --git a/images/Shaft_04658.png b/images/Shaft_04658.png new file mode 100644 index 0000000000000000000000000000000000000000..08546d9393fa76f959925f126e7606dfd0a35ffd --- /dev/null +++ b/images/Shaft_04658.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:249d178dfd0a79fbaa782c01d8a06ed97ae47e18465cda6f7cc9bf7c6d852461 +size 71142 diff --git a/images/Shaft_04659.png b/images/Shaft_04659.png new file mode 100644 index 0000000000000000000000000000000000000000..940fc84c7f3d53d142928a63cbb594a3850c43f4 --- /dev/null +++ b/images/Shaft_04659.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b4a2efed2620255f281cf7f5796dd49dde20d7383d5cfbacfdfbae8bc04b20b6 +size 110698 diff --git a/images/Shaft_04660.png b/images/Shaft_04660.png new file mode 100644 index 0000000000000000000000000000000000000000..79d90d9647399b2318e74a262d6766e80c4972be --- /dev/null +++ b/images/Shaft_04660.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4b8919a951ae33448d4d44805aa9271fbdcfe21d0dbd804dbc95209565709a1e +size 84123 diff --git a/images/Shaft_04661.png b/images/Shaft_04661.png new file mode 100644 index 0000000000000000000000000000000000000000..bfb36ee7668bb006a215096588dad9eff237f3f5 --- /dev/null +++ b/images/Shaft_04661.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d9290e383e5e8a88f2b77d84ae4d1fc34a7f514d02829fca2377ee847f723f65 +size 81410 diff --git a/images/Shaft_04662.png b/images/Shaft_04662.png new file mode 100644 index 0000000000000000000000000000000000000000..a233af98ecff1ff49f14076fc13ffdf5a11b5a2e --- /dev/null +++ b/images/Shaft_04662.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3826807c43d7c54af23c8a5cf35bf48c504fc3b55a36138fb7614d1ec1442b72 +size 72802 diff --git a/images/Shaft_04663.png b/images/Shaft_04663.png new file mode 100644 index 0000000000000000000000000000000000000000..1a78372720350d87d09e5cf6c52809d5a2a7b8ea --- /dev/null +++ b/images/Shaft_04663.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a89d8a89b608467e8e6e09eed21fb41c2dc6c1ab66515aca2e1a505708e49845 +size 80333 diff --git a/images/Shaft_04664.png b/images/Shaft_04664.png new file mode 100644 index 0000000000000000000000000000000000000000..710574d51eb5b86bbe0c258f8797d7a39516c859 --- /dev/null +++ b/images/Shaft_04664.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71881a16ba383d0e03214ca1fc2350c3ed37b387e8151f1b9bf1fc5bc8d06846 +size 89970 diff --git a/images/Shaft_04665.png b/images/Shaft_04665.png new file mode 100644 index 0000000000000000000000000000000000000000..1568070db4e6c43b1369cd15feeb1a8e129512c1 --- /dev/null +++ b/images/Shaft_04665.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:900ef4f8b05a2af95f10256d96202641071f90453a0e5d6cf7ede1090b920c8b +size 108776 diff --git a/images/Shaft_04666.png b/images/Shaft_04666.png new file mode 100644 index 0000000000000000000000000000000000000000..773f8db1c1414897001f8baf9707cd45d84d2c4d --- /dev/null +++ b/images/Shaft_04666.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:356bdabc2ae4e1deee87977f15d2e070ca8a1b8a847cba1ecd4f819558a47cdb +size 95327 diff --git a/images/Shaft_04667.png b/images/Shaft_04667.png new file mode 100644 index 0000000000000000000000000000000000000000..8699f40c3ec8f353f054e279df4e380610603a01 --- /dev/null +++ b/images/Shaft_04667.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d330a5577e9d8cea64dfe951ee02f792664ca2dd04e558d81921343990561bb5 +size 100108 diff --git a/images/Shaft_04668.png b/images/Shaft_04668.png new file mode 100644 index 0000000000000000000000000000000000000000..c7483ca522b7e2e9b21925844bbf2846c66cd049 --- /dev/null +++ b/images/Shaft_04668.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f910d4cf81fb29c0daa67c28bd81cea0f159d26be99cab685dbc291bbaabc02 +size 86102 diff --git a/images/Shaft_04669.png b/images/Shaft_04669.png new file mode 100644 index 0000000000000000000000000000000000000000..e3b136dc9dfb61b731578086b229940d3290704b --- /dev/null +++ b/images/Shaft_04669.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cc6efa0f27432b93c967d03114fc4805075fc4e439083f652d7c343764dc872d +size 76867 diff --git a/images/Shaft_04670.png b/images/Shaft_04670.png new file mode 100644 index 0000000000000000000000000000000000000000..6c46dd877970364468905655a363cff3430d9b7f --- /dev/null +++ b/images/Shaft_04670.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9c78a9ac957ca0e2e7e50b35e404d18f8e33d455817d31f5ca85dd75a3d253c9 +size 110410 diff --git a/images/Shaft_04671.png b/images/Shaft_04671.png new file mode 100644 index 0000000000000000000000000000000000000000..18fc130f966c04269540b6670f7846030abe46d5 --- /dev/null +++ b/images/Shaft_04671.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f819b343b3ae55e446bea22d090bd40ebc46650c0728ab24fe0f57cee7467df +size 71588 diff --git a/images/Shaft_04672.png b/images/Shaft_04672.png new file mode 100644 index 0000000000000000000000000000000000000000..1d6460fc96b3841d7b0aa5c9c71eac907fc25f65 --- /dev/null +++ b/images/Shaft_04672.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4ac600bd0f1b431506869b106b72718cab9b9a907e39d107de3cc4a47878d555 +size 84121 diff --git a/images/Shaft_04673.png b/images/Shaft_04673.png new file mode 100644 index 0000000000000000000000000000000000000000..206464303bf85b35a8604effd191e08114ca383f --- /dev/null +++ b/images/Shaft_04673.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:17f5020c67d232519b8552949f23772c3a7f4e5185f92a112e40a1ab823dba83 +size 118590 diff --git a/images/Shaft_04674.png b/images/Shaft_04674.png new file mode 100644 index 0000000000000000000000000000000000000000..d5dbf3b78b9f867eaa517a6a4051aed473679690 --- /dev/null +++ b/images/Shaft_04674.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:896fa34e167f0b09d47e282d52e8d70aa3eb78614f7980d5fa5fbc2d64062988 +size 78107 diff --git a/images/Shaft_04675.png b/images/Shaft_04675.png new file mode 100644 index 0000000000000000000000000000000000000000..b2cb8d21f4e239d4f5eabe7861999453840007ee --- /dev/null +++ b/images/Shaft_04675.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0e327fb0e36c2e6cf56874f1562d5800432525c220b4ad7a27eb0ec087ceccc0 +size 89042 diff --git a/images/Shaft_04676.png b/images/Shaft_04676.png new file mode 100644 index 0000000000000000000000000000000000000000..475ca2b1d6e3417badc334e4fbba4b07562da4dd --- /dev/null +++ b/images/Shaft_04676.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42cd953ee5d7fff32cebe14780b752f63fad0203f3fd225b31cf04fedd84d863 +size 87247 diff --git a/images/Shaft_04677.png b/images/Shaft_04677.png new file mode 100644 index 0000000000000000000000000000000000000000..500184a65dd276a61ed0db6227c862a162a48107 --- /dev/null +++ b/images/Shaft_04677.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:718df4c69a8f0a9b5a7ad358d1d4d998479dc0a4c704e44d2e10ba7a6e993320 +size 82940 diff --git a/images/Shaft_04678.png b/images/Shaft_04678.png new file mode 100644 index 0000000000000000000000000000000000000000..5bccf67beea7f755ab2fba49b2669659deae264e --- /dev/null +++ b/images/Shaft_04678.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:71ec39e04a60ac41870f5b7a6d7490114867d371f19d95c1d0e2c539736f8a7b +size 109669 diff --git a/images/Shaft_04679.png b/images/Shaft_04679.png new file mode 100644 index 0000000000000000000000000000000000000000..574582e09d15481f73dd7f433a44f4e619622ef0 --- /dev/null +++ b/images/Shaft_04679.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0bf62f98101495d36f7248cef741d155f2333b285be7c56fd42656d09ed0fe37 +size 102211 diff --git a/images/Shaft_04680.png b/images/Shaft_04680.png new file mode 100644 index 0000000000000000000000000000000000000000..a880ca6cf152b1cf45eae8469bb9fe834d3aca39 --- /dev/null +++ b/images/Shaft_04680.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18c84399dd1261cfa2282da6126bfad4841fa697feb72e668ef0dd958d25ae99 +size 86817 diff --git a/images/Shaft_04681.png b/images/Shaft_04681.png new file mode 100644 index 0000000000000000000000000000000000000000..2e288cddae97ec135aaa63677948ee1d3fa2126b --- /dev/null +++ b/images/Shaft_04681.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e0378ecf835eb06975db9a6b87a32b0b4740b205953b10613f7dc8f2ae9115b +size 82845 diff --git a/images/Shaft_04682.png b/images/Shaft_04682.png new file mode 100644 index 0000000000000000000000000000000000000000..52268c2fbd2b050880f9e81bf88ed2b2151cd88a --- /dev/null +++ b/images/Shaft_04682.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:273e1294c1fde5b1efc793181d7563b7f9da9af914954d96b0321d83f05784a1 +size 74055 diff --git a/images/Shaft_04683.png b/images/Shaft_04683.png new file mode 100644 index 0000000000000000000000000000000000000000..42d6e38fcaf19ea67fc466031a6b3dd72009b5ce --- /dev/null +++ b/images/Shaft_04683.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:43fcb002e3453b7ff1555852cbf9e769da7f2265bd8561bf3fbced44652cc813 +size 79022 diff --git a/images/Shaft_04684.png b/images/Shaft_04684.png new file mode 100644 index 0000000000000000000000000000000000000000..c302678b937883b166fa7d7a7db05dc37f9508d8 --- /dev/null +++ b/images/Shaft_04684.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:168718138191bfcaef38c39a4d86805df602249d291960d4eef8dad2bc2c2465 +size 92704 diff --git a/images/Shaft_04685.png b/images/Shaft_04685.png new file mode 100644 index 0000000000000000000000000000000000000000..8dedf29cb866f840ef631b99ae5c3052066fcd5a --- /dev/null +++ b/images/Shaft_04685.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b422f32f48a0ae7730fe7def801b31e960f1f7bf40e385cb8429ea0898c16f0f +size 70802 diff --git a/images/Shaft_04686.png b/images/Shaft_04686.png new file mode 100644 index 0000000000000000000000000000000000000000..058cb508c7e7ae9f5d2ce277ce8f2b718b7c315c --- /dev/null +++ b/images/Shaft_04686.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c7fcab638f2d3e8031a25018bda061c372e4bcab70128a2ccd1e75ed5b9e570 +size 113976 diff --git a/images/Shaft_04687.png b/images/Shaft_04687.png new file mode 100644 index 0000000000000000000000000000000000000000..a2905b77e25a5204ba220073556c0730602dcde2 --- /dev/null +++ b/images/Shaft_04687.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8a99eb4021d114a9c3a3b5fdcf1cc1c5ce4305741d99d3bd6ccb5b73dc6f152 +size 82706 diff --git a/images/Shaft_04688.png b/images/Shaft_04688.png new file mode 100644 index 0000000000000000000000000000000000000000..c9508e3cdfaed2e295e3de8c830c8ffb931c730f --- /dev/null +++ b/images/Shaft_04688.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39bb64df5bc8177af54974f6a65310e3241b878c82bcb64b0b798a83f6761125 +size 96089 diff --git a/images/Shaft_04689.png b/images/Shaft_04689.png new file mode 100644 index 0000000000000000000000000000000000000000..b61d8859da7e36dad7e3201874889e03c5904b70 --- /dev/null +++ b/images/Shaft_04689.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:30db395deca76d9464a25594e9e8abec43a5109f43374a6fca28400b6a4fc45d +size 88661 diff --git a/images/Shaft_04690.png b/images/Shaft_04690.png new file mode 100644 index 0000000000000000000000000000000000000000..f86b6d03d1376ec25b522d90cc325f9f8d07f710 --- /dev/null +++ b/images/Shaft_04690.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:896178f10c1b7f6568c11f7223c764db6f043bc78aab994f811a28c212de45ae +size 71344 diff --git a/images/Shaft_04691.png b/images/Shaft_04691.png new file mode 100644 index 0000000000000000000000000000000000000000..b3b02f52dc06927b8495fae890ee9f8710255f09 --- /dev/null +++ b/images/Shaft_04691.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d752f17e86ffc7763514cfecd83706be88119d47bb3131ad950dcf62172931fe +size 91529 diff --git a/images/Shaft_04692.png b/images/Shaft_04692.png new file mode 100644 index 0000000000000000000000000000000000000000..3785bd7427b8aa1c05cbae65383dc38b1805e7b1 --- /dev/null +++ b/images/Shaft_04692.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:517c07d479b9e13632a3747239526cbe96bb1275d8d1979c0f0f0466d8f3339f +size 111099 diff --git a/images/Shaft_04693.png b/images/Shaft_04693.png new file mode 100644 index 0000000000000000000000000000000000000000..c11eefe4a85bc10e2cd3a80ec1fccfa050322f12 --- /dev/null +++ b/images/Shaft_04693.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c05203636b247ac7a88b33478a5e9b3b7f4ed16686d611a13d51e3f019de78e9 +size 74811 diff --git a/images/Shaft_04694.png b/images/Shaft_04694.png new file mode 100644 index 0000000000000000000000000000000000000000..27992ed3727353da55bccd186bc7de95b0c85eeb --- /dev/null +++ b/images/Shaft_04694.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:156a31c27a6af7eb93b5f5ff751a25af5d083b1bc40f298bd0e88b35aacc2cdb +size 83548 diff --git a/images/Shaft_04695.png b/images/Shaft_04695.png new file mode 100644 index 0000000000000000000000000000000000000000..649fd84b0cd4860a42ba6a310328beff7eac0bea --- /dev/null +++ b/images/Shaft_04695.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0c4224cdcb3d7f6ac685751cf5ccea098417a39f21d9d2137740cbad9322a503 +size 90046 diff --git a/images/Shaft_04696.png b/images/Shaft_04696.png new file mode 100644 index 0000000000000000000000000000000000000000..8e32816b94fe110bc0bcaa4878f0370ad47a78b8 --- /dev/null +++ b/images/Shaft_04696.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9442f2525a4ea7c17c7a480f6583cd33c9242c72338c16645bf4b58e536a2a19 +size 89192 diff --git a/images/Shaft_04697.png b/images/Shaft_04697.png new file mode 100644 index 0000000000000000000000000000000000000000..b9d901d22e23f19c93e1fb4da582195e53549ccd --- /dev/null +++ b/images/Shaft_04697.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61db73c04e87c7ce4d16522b13e84d1e1fe4c884a1be911b2ab27dc460113d57 +size 93627 diff --git a/images/Shaft_04698.png b/images/Shaft_04698.png new file mode 100644 index 0000000000000000000000000000000000000000..4ae94baf71fbab5b8c2d7abef856d6e930d5c36d --- /dev/null +++ b/images/Shaft_04698.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2c260e6279762c64abfe0af68af0179df91fcea9144226dc97240a87b720d45d +size 87239 diff --git a/images/Shaft_04699.png b/images/Shaft_04699.png new file mode 100644 index 0000000000000000000000000000000000000000..8dcadb3d2b23a46d11a35fc5edb201c127795b92 --- /dev/null +++ b/images/Shaft_04699.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcc1fe7839b90c076d665c7dd396defdde787b86da560553e88b3217548b1c52 +size 80941 diff --git a/images/Shaft_04700.png b/images/Shaft_04700.png new file mode 100644 index 0000000000000000000000000000000000000000..6abe553c1a2d8d7071f55942ee0198fcab5659ba --- /dev/null +++ b/images/Shaft_04700.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:deb94a00bfdf41968f6239fa6fd8209c29922c0590b41c5b1c1322320a51f495 +size 93578 diff --git a/images/Shaft_04701.png b/images/Shaft_04701.png new file mode 100644 index 0000000000000000000000000000000000000000..07f9a95aaaef08226b0a405e2c181df7aa349176 --- /dev/null +++ b/images/Shaft_04701.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f9a17c5898c0cd08caba3a0ad4fae6bf47eb5d297d58d593247b361e3498be9 +size 80897 diff --git a/images/Shaft_04702.png b/images/Shaft_04702.png new file mode 100644 index 0000000000000000000000000000000000000000..2858b373cecdfd4dcee319ef4df8517e292fd9f0 --- /dev/null +++ b/images/Shaft_04702.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ea190a967ba989898026c817f92fbe28fd545744268247fc0ec9e4ca98bdd7a +size 82956 diff --git a/images/Shaft_04703.png b/images/Shaft_04703.png new file mode 100644 index 0000000000000000000000000000000000000000..019aea4fb930fe8f399444eb21cbacbed979f421 --- /dev/null +++ b/images/Shaft_04703.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:51c1a993d2f467e80e1bb8fb1061a3cd8924901c3900d07b5c9c5a3899293ac9 +size 95830 diff --git a/images/Shaft_04704.png b/images/Shaft_04704.png new file mode 100644 index 0000000000000000000000000000000000000000..d9679afb83509966e16b26b164b08ffdcff1037b --- /dev/null +++ b/images/Shaft_04704.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fcac9ea9731a6415ad9ac0feda00b1f48e3baae11ac62f434195c06080100e78 +size 76045 diff --git a/images/Shaft_04705.png b/images/Shaft_04705.png new file mode 100644 index 0000000000000000000000000000000000000000..fd9dbe05bfec4ce0d2b577eadde9a8fe00a38316 --- /dev/null +++ b/images/Shaft_04705.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad5e89b89b9feb62f06170836c4bce3448f4898e7f5eb2fb16efe6c351ba1ef6 +size 81277 diff --git a/images/Shaft_04706.png b/images/Shaft_04706.png new file mode 100644 index 0000000000000000000000000000000000000000..6fabd4e1ed620c6adf70f51312f4973e0e87a760 --- /dev/null +++ b/images/Shaft_04706.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3a894a4c1557a2b57e59b21e1dc0ff627b59bdd03dd59b1471bf77558651b912 +size 79163 diff --git a/images/Shaft_04707.png b/images/Shaft_04707.png new file mode 100644 index 0000000000000000000000000000000000000000..1b3dfa8d8f1274f108878be00cfcc3e2607152aa --- /dev/null +++ b/images/Shaft_04707.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcc20ae085a41c0117a4243c0b246cb7c2936fc1e7111021e395c0eb43fbf638 +size 87204 diff --git a/images/Shaft_04708.png b/images/Shaft_04708.png new file mode 100644 index 0000000000000000000000000000000000000000..f7c4d65ff22252f9c1268e2dd285c1da500c2d2f --- /dev/null +++ b/images/Shaft_04708.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fb4eeda35a5bf648a45030a6e9aa25dc9d1a42f3338f442b468198fa5cf7c2a0 +size 89476 diff --git a/images/Shaft_04709.png b/images/Shaft_04709.png new file mode 100644 index 0000000000000000000000000000000000000000..bf5a1a56d7c4e9728b222c6d730803d9dc5ad420 --- /dev/null +++ b/images/Shaft_04709.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb123b42659edb6098e7e01a09ac5bc143da671020ec689315b717859357cda2 +size 89900 diff --git a/images/Shaft_04710.png b/images/Shaft_04710.png new file mode 100644 index 0000000000000000000000000000000000000000..90a78d71492807cf25d3be1b91f2a9d2c34a28ca --- /dev/null +++ b/images/Shaft_04710.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6fb84983ae5f2db7ed02ddd0bcf233d75f893ea65b4469ca29dac7a69a82114 +size 76547 diff --git a/images/Shaft_04711.png b/images/Shaft_04711.png new file mode 100644 index 0000000000000000000000000000000000000000..504772b680f62f06faab6fda6011ded95ecd41db --- /dev/null +++ b/images/Shaft_04711.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93145130bbed78c9f4023e96ec2fdd92fe34ed90ed7f98e7bdc628b265fde1f8 +size 98923 diff --git a/images/Shaft_04712.png b/images/Shaft_04712.png new file mode 100644 index 0000000000000000000000000000000000000000..7922fc7ce487e6eb5ec2593d0d052339314a0095 --- /dev/null +++ b/images/Shaft_04712.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4926d83248abee8706190f208ff2fee32fb0a1c81aa73392780a9ea668fc9af7 +size 80139 diff --git a/images/Shaft_04713.png b/images/Shaft_04713.png new file mode 100644 index 0000000000000000000000000000000000000000..c8ed734ca2501d4b9da778550a23b1c02584b1f0 --- /dev/null +++ b/images/Shaft_04713.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:980715249f1e0ede70f55a0a6d7f085e75a26c62fb99dc96554d1e79e88e45c7 +size 96329 diff --git a/images/Shaft_04714.png b/images/Shaft_04714.png new file mode 100644 index 0000000000000000000000000000000000000000..72fc62a965759256f514b09fdb06c63b276ffe80 --- /dev/null +++ b/images/Shaft_04714.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41b99f38fc44f540b4e000912d7fa4969f4bc7b3e37db40045d17ece58a0ae7a +size 97794 diff --git a/images/Shaft_04715.png b/images/Shaft_04715.png new file mode 100644 index 0000000000000000000000000000000000000000..7c32e8268915a0566db40fb425d69107aa407672 --- /dev/null +++ b/images/Shaft_04715.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7655f7d66d6aa1c1d4f0445535a87823e981ce2d6a1264290dc76a503ab163c0 +size 95645 diff --git a/images/Shaft_04716.png b/images/Shaft_04716.png new file mode 100644 index 0000000000000000000000000000000000000000..f7c446c7c3e62124e293866c345540ed86aa4007 --- /dev/null +++ b/images/Shaft_04716.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f6b34a9678e5326dca9e1e300dfe6bd2aac7fc274021eba44db37284ba8d757c +size 67572 diff --git a/images/Shaft_04717.png b/images/Shaft_04717.png new file mode 100644 index 0000000000000000000000000000000000000000..121f123db3364f27a7ef4e148b38101abac72082 --- /dev/null +++ b/images/Shaft_04717.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b35786a8281bbad0c5849f45b4f9126e160250bc837eca99cee0b8c95652e97 +size 67539 diff --git a/images/Shaft_04718.png b/images/Shaft_04718.png new file mode 100644 index 0000000000000000000000000000000000000000..b3eb14d7c0ae783ef38f149bf0f5ea5abd580009 --- /dev/null +++ b/images/Shaft_04718.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74b76a3d99a328e062611758c198c7af14d970eaa692d34a2ce7a6d444741ffc +size 103378 diff --git a/images/Shaft_04719.png b/images/Shaft_04719.png new file mode 100644 index 0000000000000000000000000000000000000000..f38a67a3d1ba316cbf4169ef29f08546eb4fcee5 --- /dev/null +++ b/images/Shaft_04719.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e25103e6dc855c7e75e3a610b4517a0c65b0748a655ab8238f97d9df2874ce2c +size 86071 diff --git a/images/Shaft_04720.png b/images/Shaft_04720.png new file mode 100644 index 0000000000000000000000000000000000000000..9eadaa0a8d2f3b739613dc4a0fddc068daad9907 --- /dev/null +++ b/images/Shaft_04720.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:616c5b2cd1e2d542c4ab8aa0cbfb121a46771adc30f77c036b45e92d734a8b4d +size 73243 diff --git a/images/Shaft_04721.png b/images/Shaft_04721.png new file mode 100644 index 0000000000000000000000000000000000000000..b32303144785345545de880049c78f08db08b0d6 --- /dev/null +++ b/images/Shaft_04721.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:61af290332a63c36a778d2a9c376f89584e544e5b25cc610f21be3699bc16160 +size 99247 diff --git a/images/Shaft_04722.png b/images/Shaft_04722.png new file mode 100644 index 0000000000000000000000000000000000000000..5adf8ee9ccdfeac641746d8ca9d02b9f158d4eaa --- /dev/null +++ b/images/Shaft_04722.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e95f603b8f1b549e9cbfc4e06fdc214f2a3f3c44df4f738ca2c67e6900715c34 +size 78183 diff --git a/images/Shaft_04723.png b/images/Shaft_04723.png new file mode 100644 index 0000000000000000000000000000000000000000..adf1bbea3988f336ed2bdac9758bb69fc27f14b6 --- /dev/null +++ b/images/Shaft_04723.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:18c893727dbd9ec9ed67ccf68b32115e836f5a02a803a8689021d55bdb040158 +size 74636 diff --git a/images/Shaft_04724.png b/images/Shaft_04724.png new file mode 100644 index 0000000000000000000000000000000000000000..8d4f2b496f4b900a931b5dc3bc71b00d06bd2c6d --- /dev/null +++ b/images/Shaft_04724.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f810d410b3804d13135482e092c8c07bef55a66e32b5128f94c7922f6944737f +size 109939 diff --git a/images/Shaft_04725.png b/images/Shaft_04725.png new file mode 100644 index 0000000000000000000000000000000000000000..2e3594c5624ee9875348bf476b054b95b255d76b --- /dev/null +++ b/images/Shaft_04725.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:26bdf5b5ab214df140659b66417895eb406bb749c9c741942c8f23655c3145ba +size 104503 diff --git a/images/Shaft_04726.png b/images/Shaft_04726.png new file mode 100644 index 0000000000000000000000000000000000000000..dfa156408be2c3222ce38cc11d2fc2b9071c027b --- /dev/null +++ b/images/Shaft_04726.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:421bde107751b0b27680a3f4cc0a47afc248c974a6feb6e4fa1ca9ec35bbf1c8 +size 101092 diff --git a/images/Shaft_04727.png b/images/Shaft_04727.png new file mode 100644 index 0000000000000000000000000000000000000000..e8a3644941559f1495ea0756980a7651c0d8f783 --- /dev/null +++ b/images/Shaft_04727.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e624704ff0374f3204760eb5381d88bdd3f2b5f44886753d5ca11b8aaf42dc6d +size 83218 diff --git a/images/Shaft_04728.png b/images/Shaft_04728.png new file mode 100644 index 0000000000000000000000000000000000000000..72e4f585cd1f551238ac117ade6aa0b2fea27bc0 --- /dev/null +++ b/images/Shaft_04728.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8acf158c477de3c6c34b70147dc804f85f3dcc01c0e2a576ef6a2908e2039637 +size 86934 diff --git a/images/Shaft_04729.png b/images/Shaft_04729.png new file mode 100644 index 0000000000000000000000000000000000000000..f47d39f8698e90b7e79406aedab7075687fa99b1 --- /dev/null +++ b/images/Shaft_04729.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:76a38e86e9481b1f3f25e26ebfff87f5cfdb218d4f030f0e04dbc538f7184b58 +size 75173 diff --git a/images/Shaft_04730.png b/images/Shaft_04730.png new file mode 100644 index 0000000000000000000000000000000000000000..52425a4dae936a7974500834039a66a0e57e23de --- /dev/null +++ b/images/Shaft_04730.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7e74cfb473d2835d1567a07b43e227bcec0e74b5953b2ed2475651a2e6713161 +size 87951 diff --git a/images/Shaft_04731.png b/images/Shaft_04731.png new file mode 100644 index 0000000000000000000000000000000000000000..09768843cabba38258fb20f33c2e394aa95e8891 --- /dev/null +++ b/images/Shaft_04731.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9022fb43179fd5bc6aae5e3aa48f47f780f1d3e652814bc062c348e4acbfa4db +size 72494 diff --git a/images/Shaft_04732.png b/images/Shaft_04732.png new file mode 100644 index 0000000000000000000000000000000000000000..3d2914902f20e523ccec22156be63686f49c9d7a --- /dev/null +++ b/images/Shaft_04732.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e9c4a5ff2b999a42efa36e825ab8fc7d6fbdf857259da6de87fde2d8ece9c2c1 +size 71750 diff --git a/images/Shaft_04733.png b/images/Shaft_04733.png new file mode 100644 index 0000000000000000000000000000000000000000..2388701245dfa09a6682e9a29d32c219fd50a830 --- /dev/null +++ b/images/Shaft_04733.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:390e236386887c726b59e1b604581ae95c581c507c1b6694451c4c2e1b04709b +size 78047 diff --git a/images/Shaft_04734.png b/images/Shaft_04734.png new file mode 100644 index 0000000000000000000000000000000000000000..7376499e69554922a9cd753b747d42765e75a24f --- /dev/null +++ b/images/Shaft_04734.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcd94a59f521d73be651f02cf905be7d24e5d76931db054df4a038b9735b967e +size 73564 diff --git a/images/Shaft_04735.png b/images/Shaft_04735.png new file mode 100644 index 0000000000000000000000000000000000000000..6369dad0702268636ad97a33dfca035bf146cc5a --- /dev/null +++ b/images/Shaft_04735.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1755ed9ba4018c269f69ace50011bcff6a3201c24e8171f7087b4795598a0e9 +size 84085 diff --git a/images/Shaft_04736.png b/images/Shaft_04736.png new file mode 100644 index 0000000000000000000000000000000000000000..e12201945669dd7cc553120dc181ed2611655d76 --- /dev/null +++ b/images/Shaft_04736.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8f03dc526eba1e10a170230785c39fc0825b03b273d9f4465954232835b51fe +size 100623 diff --git a/images/Shaft_04737.png b/images/Shaft_04737.png new file mode 100644 index 0000000000000000000000000000000000000000..900e4569c2924d811db0149b486458a52e0a2208 --- /dev/null +++ b/images/Shaft_04737.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5be10fa17046e1e3b565a4186c6222350013c1429841677c189881a1a06785b4 +size 65783 diff --git a/images/Shaft_04738.png b/images/Shaft_04738.png new file mode 100644 index 0000000000000000000000000000000000000000..6a228c0f3270883c02cda156507ab1f27218ce77 --- /dev/null +++ b/images/Shaft_04738.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f35abb2312d3a1cba2ae7e0829ad796df80125f8df60ccdbb84cc2f2ec717241 +size 98056 diff --git a/images/Shaft_04739.png b/images/Shaft_04739.png new file mode 100644 index 0000000000000000000000000000000000000000..2cdd5b67bca43aea65a4c8fa16f4c44c2f10c864 --- /dev/null +++ b/images/Shaft_04739.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9bf8a8c1a4651dc4a040f5a7798c736ec09d72c6f68878aa18a211495baa00c2 +size 72956 diff --git a/images/Shaft_04740.png b/images/Shaft_04740.png new file mode 100644 index 0000000000000000000000000000000000000000..35a22dd6e05b3db4fd3072580fc2d13116227f0e --- /dev/null +++ b/images/Shaft_04740.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7c45920711ee76b0f1fc2dc0736939012df5885c588e2b03d5a25b4d043726f +size 107666 diff --git a/images/Shaft_04741.png b/images/Shaft_04741.png new file mode 100644 index 0000000000000000000000000000000000000000..e541fb215211f6fafa8e8462c92b909f7d215d55 --- /dev/null +++ b/images/Shaft_04741.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1041aec7d2300054e09cf772900478f9810d431190df31831d34e95ac3c09265 +size 107004 diff --git a/images/Shaft_04742.png b/images/Shaft_04742.png new file mode 100644 index 0000000000000000000000000000000000000000..73c251481210ad9cccafce78a0994320a3835ec9 --- /dev/null +++ b/images/Shaft_04742.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6d28c4ddfa51b20fc2df0bbeff0376e5630d17801a24235b7f80449240e80a27 +size 76448 diff --git a/images/Shaft_04743.png b/images/Shaft_04743.png new file mode 100644 index 0000000000000000000000000000000000000000..320bf912c2500b9ca6f9948ef1d87271aa9dfe23 --- /dev/null +++ b/images/Shaft_04743.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d45c10b1caab31f92eac5ccc8b6cc87c03ea4fcb37faaf348bb5aa30552a6e29 +size 100122 diff --git a/images/Shaft_04744.png b/images/Shaft_04744.png new file mode 100644 index 0000000000000000000000000000000000000000..8441146ebc489ff3955e96a47fcf105c0a02c7f1 --- /dev/null +++ b/images/Shaft_04744.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d1b8375511e4e593bf241d7fb3d4db12bdab80c7120959c888243cd432d80cc +size 88768 diff --git a/images/Shaft_04745.png b/images/Shaft_04745.png new file mode 100644 index 0000000000000000000000000000000000000000..3545c74bc289817a6f0376de0a7304fc1040df45 --- /dev/null +++ b/images/Shaft_04745.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1bdfa9848bf879a5f4147acb6afdaacd2c5c1570b86f239eb1beee61e346c301 +size 69158 diff --git a/images/Shaft_04746.png b/images/Shaft_04746.png new file mode 100644 index 0000000000000000000000000000000000000000..ee0303dfadafcfb74030af4a40a8f461ceddb655 --- /dev/null +++ b/images/Shaft_04746.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c04b56777af509c4c65fc47198e11abbaac935eadd1cefa87bdb3dce03acd34a +size 83397 diff --git a/images/Shaft_04747.png b/images/Shaft_04747.png new file mode 100644 index 0000000000000000000000000000000000000000..25789212167fade5d01db4ab616403293506c910 --- /dev/null +++ b/images/Shaft_04747.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8752b8d5a71d10c5711c31af63901ee4419b4eeb84e69b3138fbacdffff34a05 +size 83004 diff --git a/images/Shaft_04748.png b/images/Shaft_04748.png new file mode 100644 index 0000000000000000000000000000000000000000..5598eb8d35501f84d8406e9afa60de82083182ec --- /dev/null +++ b/images/Shaft_04748.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:60d3d2422c34a90fef895196f7d30b43013dd1eb4e6d26e9e756e34e1288f777 +size 75209 diff --git a/images/Shaft_04749.png b/images/Shaft_04749.png new file mode 100644 index 0000000000000000000000000000000000000000..4df7cb5232ddef7ed408fdf6a4a8fd85bab7733b --- /dev/null +++ b/images/Shaft_04749.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5463e69ce0eca36c69157c5e25f4d616b079ee17716e11dc281cf2e5b37dd702 +size 70761 diff --git a/images/Shaft_04750.png b/images/Shaft_04750.png new file mode 100644 index 0000000000000000000000000000000000000000..70508e0614edb29973d57975c6c595e6f2aad263 --- /dev/null +++ b/images/Shaft_04750.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ffd3a2a16bb8c0b1fd4a1fc6d2893176cd5144597d8bcca5598122281e84c31e +size 82842 diff --git a/images/Shaft_04751.png b/images/Shaft_04751.png new file mode 100644 index 0000000000000000000000000000000000000000..2927b9dc155f66b86ef611c6105af88297b6214a --- /dev/null +++ b/images/Shaft_04751.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea99834837ff23084b551f1b1da410e8cf8091c0d9fe9f6b2c2d06e8128d6e06 +size 84223 diff --git a/images/Shaft_04752.png b/images/Shaft_04752.png new file mode 100644 index 0000000000000000000000000000000000000000..b33b54285b76acc0b89bf6816fd97617cce18b22 --- /dev/null +++ b/images/Shaft_04752.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91703a6d82b68552bbfca958019f9acb7647a0b06a26d505ef7d1d1d962bbba9 +size 74405 diff --git a/images/Shaft_04753.png b/images/Shaft_04753.png new file mode 100644 index 0000000000000000000000000000000000000000..2dcaf330646e549a15f158c46eeb9a3086787e01 --- /dev/null +++ b/images/Shaft_04753.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1884aeb41bee89987b943ccb54ff1026779144743618939c0c5390d0be836985 +size 66704 diff --git a/images/Shaft_04754.png b/images/Shaft_04754.png new file mode 100644 index 0000000000000000000000000000000000000000..5a5ecebe86f7d96dbf1d6ecc8f3af1cd9f536d15 --- /dev/null +++ b/images/Shaft_04754.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5b910e3de66651916bc05d98d5414fe868a97db166fcf38863e2c059b7f4cc5 +size 91188 diff --git a/images/Shaft_04755.png b/images/Shaft_04755.png new file mode 100644 index 0000000000000000000000000000000000000000..aec3c21f1e392728d1cd1deb3edd0bc7e1790061 --- /dev/null +++ b/images/Shaft_04755.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:504b127474676a7b55e5bddd8460dcc98066dd5c04de560a0dd0b0dedcc125e3 +size 70962 diff --git a/images/Shaft_04756.png b/images/Shaft_04756.png new file mode 100644 index 0000000000000000000000000000000000000000..afec4014b2129f04d02a6ccf375ceeb1a7b46cb0 --- /dev/null +++ b/images/Shaft_04756.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9009d38e2ba9a74e0f6563a01715e693dde8084432642165069b770d19763e6e +size 81381 diff --git a/images/Shaft_04757.png b/images/Shaft_04757.png new file mode 100644 index 0000000000000000000000000000000000000000..32858548c3262da2e0bd7b54afc958c6c9cc6966 --- /dev/null +++ b/images/Shaft_04757.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ad616c250dba230f3ee0d4529a3b90e87a9c368933d55139f5fead65958a56b2 +size 97264 diff --git a/images/Shaft_04758.png b/images/Shaft_04758.png new file mode 100644 index 0000000000000000000000000000000000000000..a03dfc5141d56cd1b8b91e7579361a403e6ec76e --- /dev/null +++ b/images/Shaft_04758.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a021bd88c5f5464f2ef9db70b389d1bb8bcbb763a8538d888c974ef8f8111a8d +size 78112 diff --git a/images/Shaft_04759.png b/images/Shaft_04759.png new file mode 100644 index 0000000000000000000000000000000000000000..b5f4c3d23222bdd2f8bc1bfab9f7288b079820f4 --- /dev/null +++ b/images/Shaft_04759.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bfd4bc01403fe84368e8c07c1da47c6129cb617573612960968a68d620ef52f0 +size 73566 diff --git a/images/Shaft_04760.png b/images/Shaft_04760.png new file mode 100644 index 0000000000000000000000000000000000000000..9cbe02804d366f8f517e4e2314fc9a01f7f7a40e --- /dev/null +++ b/images/Shaft_04760.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cad0ee8f4e8902462d673602f1d1c8f58a76e7a804c334300811e5ef16c84734 +size 78821 diff --git a/images/Shaft_04761.png b/images/Shaft_04761.png new file mode 100644 index 0000000000000000000000000000000000000000..d26af96427268d2040a65aa14f598c578be47d08 --- /dev/null +++ b/images/Shaft_04761.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9b4ecab36ff1cfb2b2951e215dc6217180e69a5b5ae0d4197898b9fb6129b41d +size 69955 diff --git a/images/Shaft_04762.png b/images/Shaft_04762.png new file mode 100644 index 0000000000000000000000000000000000000000..24de5c1e378501a3503501ec12bab15b3aaceea1 --- /dev/null +++ b/images/Shaft_04762.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0d4a6193e00bec40b1323c2670286e37745e982d46b89e8769df8996bedcb692 +size 103737 diff --git a/images/Shaft_04763.png b/images/Shaft_04763.png new file mode 100644 index 0000000000000000000000000000000000000000..bbd243b699ccaa2ef4ae30333cc73e98c8a8fb6e --- /dev/null +++ b/images/Shaft_04763.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe0cc2de5f7cdf15c44f0837f622ee38bc093700d17d1a8d2b50b2f4a778f61f +size 73364 diff --git a/images/Shaft_04764.png b/images/Shaft_04764.png new file mode 100644 index 0000000000000000000000000000000000000000..8878c25537ea1b8d46d1cd51210d57bdbb1b7d79 --- /dev/null +++ b/images/Shaft_04764.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:891d140f7e00fbf6b11acd76ec12d2e05f26b544b686ea3661f8ea6283418c4c +size 84889 diff --git a/images/Shaft_04765.png b/images/Shaft_04765.png new file mode 100644 index 0000000000000000000000000000000000000000..c124b6692efb9e9943b5ddbe71b89059459bbe0d --- /dev/null +++ b/images/Shaft_04765.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:00b095869cf02ece56400183a8e8116d730f89a7c24da88ae7cbc238e051b7c3 +size 85800 diff --git a/images/Shaft_04766.png b/images/Shaft_04766.png new file mode 100644 index 0000000000000000000000000000000000000000..a08b560aab713f97bb2990ff0c6c3c4b693f6f16 --- /dev/null +++ b/images/Shaft_04766.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c7dec92ed17fac76a212086e79c634a2cf6ea6039be0986a4371131f804a5f4d +size 93992 diff --git a/images/Shaft_04767.png b/images/Shaft_04767.png new file mode 100644 index 0000000000000000000000000000000000000000..cc9a2d03d4aa1b24d1a3f2817f5e36b3f20c56f1 --- /dev/null +++ b/images/Shaft_04767.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:014bc3185950dfb942fd03dfa400d044cbb3950b158de89cd2a04ac9e7b5f778 +size 90186 diff --git a/images/Shaft_04768.png b/images/Shaft_04768.png new file mode 100644 index 0000000000000000000000000000000000000000..aea6f8aae1f76be4a3f41ac62d184db98300d443 --- /dev/null +++ b/images/Shaft_04768.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5370a4a4d9dc1c7ae6b288e28d36e15d2a48a612fd164171a82afefa6d97e80e +size 78886 diff --git a/images/Shaft_04769.png b/images/Shaft_04769.png new file mode 100644 index 0000000000000000000000000000000000000000..35ac5e7060998042bcae3264def0e27f79c9486b --- /dev/null +++ b/images/Shaft_04769.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:150e715f5bf43b86c702580150315b4325f2e6b258a203a8f3b83d733197dbb1 +size 109350 diff --git a/images/Shaft_04770.png b/images/Shaft_04770.png new file mode 100644 index 0000000000000000000000000000000000000000..2822194bea51c4e2c8365aaa53bf573d7e118d47 --- /dev/null +++ b/images/Shaft_04770.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20cd9d65d36f8fe468c4493f65d94859bfb284c2f58b26192f6b17f9a59ca4dc +size 73559 diff --git a/images/Shaft_04771.png b/images/Shaft_04771.png new file mode 100644 index 0000000000000000000000000000000000000000..ccef2224b7b866cee1cd9d33d2c3474b0fb327e6 --- /dev/null +++ b/images/Shaft_04771.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:07bc6a7ca53b0f67d203fa81178c7b08d7f019328b8956f537b681510fed5245 +size 82970 diff --git a/images/Shaft_04772.png b/images/Shaft_04772.png new file mode 100644 index 0000000000000000000000000000000000000000..5739fa4b42ef3c83e4d328aaaf50e3fd407d77e3 --- /dev/null +++ b/images/Shaft_04772.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:508f9ab1fefde95534b89980b64f0e52d22dc0ddf8a846e8dbd5dc8da52d4d0f +size 95241 diff --git a/images/Shaft_04773.png b/images/Shaft_04773.png new file mode 100644 index 0000000000000000000000000000000000000000..c8d05f804084462bc125bc06961c974ed9592efc --- /dev/null +++ b/images/Shaft_04773.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b07e81d04b5dbad42f226603726946ddf0247f804daf511517be6c79c23f92c3 +size 88486 diff --git a/images/Shaft_04774.png b/images/Shaft_04774.png new file mode 100644 index 0000000000000000000000000000000000000000..0eae628ebbe592c108cace456c29d3527e29bd6d --- /dev/null +++ b/images/Shaft_04774.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:20a517fec7e9f9d9e0aad1598ed4057dbfa73b907d884a471f87e393cd7c16cf +size 85530 diff --git a/images/Shaft_04775.png b/images/Shaft_04775.png new file mode 100644 index 0000000000000000000000000000000000000000..30fbcf6112f074c92a0adc83638a1d90f7c6096e --- /dev/null +++ b/images/Shaft_04775.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42dc223d68caec882d1e34a5b06059bca7575de67f85531be7c8d88fb98e3f14 +size 98066 diff --git a/images/Shaft_04776.png b/images/Shaft_04776.png new file mode 100644 index 0000000000000000000000000000000000000000..5284a74608ac937a2891f3bc693cff983bbf0a68 --- /dev/null +++ b/images/Shaft_04776.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:901928886149fe86b00c0ae1fd6e429e14f16f14e691ac8d7e04068c6e48d4fa +size 81041 diff --git a/images/Shaft_04777.png b/images/Shaft_04777.png new file mode 100644 index 0000000000000000000000000000000000000000..4aa9c2dbb1f2e083896fd4aa5488c11b58ba82e6 --- /dev/null +++ b/images/Shaft_04777.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8274c3551c7cf06b1c5b9bcd153ade69b883463982545010b70ad6cc722300a3 +size 94903 diff --git a/images/Shaft_04778.png b/images/Shaft_04778.png new file mode 100644 index 0000000000000000000000000000000000000000..b8fa0ed8bcfbbda5e10577f154b203b0924840a7 --- /dev/null +++ b/images/Shaft_04778.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b93c5881b23ede969e12b945be05db98dcd50bc5051077d813c54db033207753 +size 99641 diff --git a/images/Shaft_04779.png b/images/Shaft_04779.png new file mode 100644 index 0000000000000000000000000000000000000000..a3fec21ff6ef20e093b3b997b55f4ad56f08349d --- /dev/null +++ b/images/Shaft_04779.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6effdb4197b2b9309cfa49ffa3797a3a5535c4c1484b8cd3628922da19b453ad +size 84955 diff --git a/images/Shaft_04780.png b/images/Shaft_04780.png new file mode 100644 index 0000000000000000000000000000000000000000..26aecb87e0cf8287ca46c0bd65b079380ce3e2c3 --- /dev/null +++ b/images/Shaft_04780.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a2f27e148893fc7d250664c38aed827c6107431e14676c2d820166666f89a60c +size 74647 diff --git a/images/Shaft_04781.png b/images/Shaft_04781.png new file mode 100644 index 0000000000000000000000000000000000000000..e55a3bc7a6cb16fb5f181053c60ea20a3347ca21 --- /dev/null +++ b/images/Shaft_04781.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0378c8b1c86fcae558a268b1cb86f6796d909c7a9e6b50e9a7c571de97a0de50 +size 83911 diff --git a/images/Shaft_04782.png b/images/Shaft_04782.png new file mode 100644 index 0000000000000000000000000000000000000000..c8521a4a9eeb25c7f3842376eaa9d0d8ee96cfca --- /dev/null +++ b/images/Shaft_04782.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:444ce9a6196fc82fb8605fa340ef788887350913ac9490c8145cd45043c7be7e +size 69537 diff --git a/images/Shaft_04783.png b/images/Shaft_04783.png new file mode 100644 index 0000000000000000000000000000000000000000..da156d5fcf5a4f3ffd0e7a73f0f2a1068567cef1 --- /dev/null +++ b/images/Shaft_04783.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1f24484d51ac95c8c846f5bc88514062481469fe8c8e09a9763bb39e92de4adc +size 77618 diff --git a/images/Shaft_04784.png b/images/Shaft_04784.png new file mode 100644 index 0000000000000000000000000000000000000000..6951fee61ddf4deaa65b6417ea7871da1fcb6534 --- /dev/null +++ b/images/Shaft_04784.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:535cb9d60338907f6bce635b37cc51160c26564f289d2ddc13bce5001acecdaf +size 85502 diff --git a/images/Shaft_04785.png b/images/Shaft_04785.png new file mode 100644 index 0000000000000000000000000000000000000000..6e19f4785f3f32222161a347af7773003ee0a3f6 --- /dev/null +++ b/images/Shaft_04785.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:93bf48ed740b56f9be11e7e412c239bd1992807736fc747193a848b8448895f5 +size 87639 diff --git a/images/Shaft_04786.png b/images/Shaft_04786.png new file mode 100644 index 0000000000000000000000000000000000000000..05c72be8ded78cfc46c97685f086b417fddcd22f --- /dev/null +++ b/images/Shaft_04786.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8059b8e7c052a0f91aee8f2c2ba9176c3d8effff017eb869d10611728aa8880a +size 90114 diff --git a/images/Shaft_04787.png b/images/Shaft_04787.png new file mode 100644 index 0000000000000000000000000000000000000000..5a0d0c49359cbb60dff13af12d621b8b63826cd6 --- /dev/null +++ b/images/Shaft_04787.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1a16b3205b78e27a2e1fc45fced794bf0304ffc16d2c47a4c9309443160eb86 +size 79240 diff --git a/images/Shaft_04788.png b/images/Shaft_04788.png new file mode 100644 index 0000000000000000000000000000000000000000..6e725447636d0ef1a5c61b1a52f387090da4823a --- /dev/null +++ b/images/Shaft_04788.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa87dd4cafc78819520527a322dbc3c511f6883a8661b2c9c317c8c05b7e3031 +size 72495 diff --git a/images/Shaft_04789.png b/images/Shaft_04789.png new file mode 100644 index 0000000000000000000000000000000000000000..1bb0b16847c71cf79f85895bc0e7fc7cc79ddcc7 --- /dev/null +++ b/images/Shaft_04789.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c912bd3d252989715aa4cfe728a244526f2942849e15425a404cae406a165e7b +size 79213 diff --git a/images/Shaft_04790.png b/images/Shaft_04790.png new file mode 100644 index 0000000000000000000000000000000000000000..7076ac8f68ae57b04f6bdf5789a6b47fc035c56e --- /dev/null +++ b/images/Shaft_04790.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cccffe2a3efb21b4bd7ee1037a3134d69e87622ea397db6851f2dd8d54e6b5f +size 74978 diff --git a/images/Shaft_04791.png b/images/Shaft_04791.png new file mode 100644 index 0000000000000000000000000000000000000000..e476f1835722b27940e14c13645504124b0a497f --- /dev/null +++ b/images/Shaft_04791.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6a396839b19c1bad3678bc843201fc28b139638036d7a6ed223702e177714bf +size 90048 diff --git a/images/Shaft_04792.png b/images/Shaft_04792.png new file mode 100644 index 0000000000000000000000000000000000000000..ab852968ec5bc0f33441bd6a9670eb880824f59c --- /dev/null +++ b/images/Shaft_04792.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ebdb47628a0c5b3926ee0b52a7cf1aed820981fa2d9ac4e5ac20f57fbbf009b0 +size 70080 diff --git a/images/Shaft_04793.png b/images/Shaft_04793.png new file mode 100644 index 0000000000000000000000000000000000000000..4520b63ab01517bde5d08e511b29a62907429e8f --- /dev/null +++ b/images/Shaft_04793.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:246f77272316b99ae4709d7ab7a7c58a10f4d9bf08951cdddcc09bf9bb43b9fd +size 73446 diff --git a/images/Shaft_04794.png b/images/Shaft_04794.png new file mode 100644 index 0000000000000000000000000000000000000000..3b2fe6f6caeadc5cb0dc8565cd248889766abe24 --- /dev/null +++ b/images/Shaft_04794.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d8e36618fed9846cea1147e69d68b87e8e6e2651a18363fc9a4cb097b6ca9763 +size 69741 diff --git a/images/Shaft_04795.png b/images/Shaft_04795.png new file mode 100644 index 0000000000000000000000000000000000000000..4e9b0aa44ebc7dbfc1bea2f4e092d89a8adb8d69 --- /dev/null +++ b/images/Shaft_04795.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:356dd8e0d441ff8a49ce9ad617deee5e15943915e6e4b0cccb7e8df4b861e1d9 +size 94369 diff --git a/images/Shaft_04796.png b/images/Shaft_04796.png new file mode 100644 index 0000000000000000000000000000000000000000..71598758e796b9835c7ddc4235da346a710250c1 --- /dev/null +++ b/images/Shaft_04796.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c66ceada3f1edc7e80df0406e3e7eadc717f270d08b33c7ce77b23ae2d331b69 +size 105471 diff --git a/images/Shaft_04797.png b/images/Shaft_04797.png new file mode 100644 index 0000000000000000000000000000000000000000..bf621f8fab67570284a827385988cbe96836591c --- /dev/null +++ b/images/Shaft_04797.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d6ed91e585b8f9e467c4be71ec57f81e38c0503532b6a7fa494e785ae66e63e2 +size 76016 diff --git a/images/Shaft_04798.png b/images/Shaft_04798.png new file mode 100644 index 0000000000000000000000000000000000000000..2e603cdc4de0ea851d5025c5608f446db5029070 --- /dev/null +++ b/images/Shaft_04798.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1173017a0408e036f6c1db056e2ca7d680bd3443a55255296c0577af7440fd30 +size 87879 diff --git a/images/Shaft_04799.png b/images/Shaft_04799.png new file mode 100644 index 0000000000000000000000000000000000000000..6b22f49ae7a01134f79273525812d527f21f6da9 --- /dev/null +++ b/images/Shaft_04799.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f905cfe5c5d97d8998f6591b836fc1de6bd3f8138cd4b058209a2bc65701b7d4 +size 73979 diff --git a/images/Shaft_04800.png b/images/Shaft_04800.png new file mode 100644 index 0000000000000000000000000000000000000000..865eef9313335b57cf75339f9f49fe6811010dd0 --- /dev/null +++ b/images/Shaft_04800.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28ea7489acbca0c857e3a2794ef97d41b2d3119c963c81dfd315447f9e641248 +size 80425 diff --git a/images/Shaft_04801.png b/images/Shaft_04801.png new file mode 100644 index 0000000000000000000000000000000000000000..06cf80cf2851c378b5d540da231b8dfd7f31c9e6 --- /dev/null +++ b/images/Shaft_04801.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:86adc3e6eda4e0ef394b397bd973f89fb6796b4deae6e753d19b197e6f4bd11b +size 96399 diff --git a/images/Shaft_04802.png b/images/Shaft_04802.png new file mode 100644 index 0000000000000000000000000000000000000000..08dc7561522a928289d118405b2a6a750e6ecd2e --- /dev/null +++ b/images/Shaft_04802.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b23b24286c3761149d20b3290bf31030afa74389355c716c3a7a170eb2633ef6 +size 71276 diff --git a/images/Shaft_04803.png b/images/Shaft_04803.png new file mode 100644 index 0000000000000000000000000000000000000000..b85a5e94749c6f967359caea1d938a5b563c50bb --- /dev/null +++ b/images/Shaft_04803.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb2efaaea858ff1703cf4aff09654e922f14caf7fc0008ecf5da956121551924 +size 92589 diff --git a/images/Shaft_04804.png b/images/Shaft_04804.png new file mode 100644 index 0000000000000000000000000000000000000000..f9b8f458908a1f6b40fac47624df3d8966c6fcb2 --- /dev/null +++ b/images/Shaft_04804.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e7e67149fafb1ea36d855ea877374a074b43ae84c29ae1f4869bc39d1aaf8ad9 +size 87119 diff --git a/images/Shaft_04805.png b/images/Shaft_04805.png new file mode 100644 index 0000000000000000000000000000000000000000..4a10a343581e35460f8e9aae528dcd546884f72d --- /dev/null +++ b/images/Shaft_04805.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:996e1e8668576f20dc44bf74c040192be05bc5e8af0a7733582abb628973e6db +size 78146 diff --git a/images/Shaft_04806.png b/images/Shaft_04806.png new file mode 100644 index 0000000000000000000000000000000000000000..28e7f7723ca3e41cdc23f6c53257cf0403eaca63 --- /dev/null +++ b/images/Shaft_04806.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae7b7c7c262c5095a01d8e5c873cbf33e0cf3f3ac4bc9b10036ffc019bded1f4 +size 100112 diff --git a/images/Shaft_04807.png b/images/Shaft_04807.png new file mode 100644 index 0000000000000000000000000000000000000000..8147f63f0fc7dd334dd52e3be321d948ebafce0d --- /dev/null +++ b/images/Shaft_04807.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02ecaa1aae15ab4b7062a6ec54f67cf48b5d214423ec85f1eadb1fa6c3f7a557 +size 85934 diff --git a/images/Shaft_04808.png b/images/Shaft_04808.png new file mode 100644 index 0000000000000000000000000000000000000000..d01fe2a347aac010bbce9ba225c59887649520b0 --- /dev/null +++ b/images/Shaft_04808.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5c323d7878104ac3be73d045bfba4f7dbec860a5dd97335956f46fc6016b9e7c +size 104040 diff --git a/images/Shaft_04809.png b/images/Shaft_04809.png new file mode 100644 index 0000000000000000000000000000000000000000..244dfebdaee8c62fb8d6d858d5c9359b4a9012b4 --- /dev/null +++ b/images/Shaft_04809.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a1a24ee336c55d93e6373d61d303c81413db2fe27a6fe2837138157c6d2ab64 +size 91797 diff --git a/images/Shaft_04810.png b/images/Shaft_04810.png new file mode 100644 index 0000000000000000000000000000000000000000..e9feebec9c6ad38d7bb74c81fb896964cf28239a --- /dev/null +++ b/images/Shaft_04810.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:120947807df74d575231b1aac89d2c8d52cd866fa2e3f166cabfe708ec0ba362 +size 83165 diff --git a/images/Shaft_04811.png b/images/Shaft_04811.png new file mode 100644 index 0000000000000000000000000000000000000000..b9bc46cd6327c49b374b1ded5109ede5bb7d7171 --- /dev/null +++ b/images/Shaft_04811.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0879fa3dd696ec3cea0678f6292e7907d5e5db3b2106857452a7019f68806009 +size 88814 diff --git a/images/Shaft_04812.png b/images/Shaft_04812.png new file mode 100644 index 0000000000000000000000000000000000000000..e3f2cea6d99cccbe41334caf0edfe84169a3199c --- /dev/null +++ b/images/Shaft_04812.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:81923a4f14c108a9e6c3e1da79245ecaa3436b33e745b3fb976c660314b8b619 +size 88299 diff --git a/images/Shaft_04813.png b/images/Shaft_04813.png new file mode 100644 index 0000000000000000000000000000000000000000..2729a4e961875b741f0ce02be6eabdc766b1b7c2 --- /dev/null +++ b/images/Shaft_04813.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b46ebeead576658d78d571f598d6dfdcd4632cbc60d49197dc3ffee9082c1605 +size 92951 diff --git a/images/Shaft_04814.png b/images/Shaft_04814.png new file mode 100644 index 0000000000000000000000000000000000000000..f18f45b560583291bdfcff6824ab22d6fdfb4212 --- /dev/null +++ b/images/Shaft_04814.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ec02c46bf84ac22bd67ef4ed42e9af42d36d266331854009ecc07c6e2af2745 +size 84894 diff --git a/images/Shaft_04815.png b/images/Shaft_04815.png new file mode 100644 index 0000000000000000000000000000000000000000..a237e17e83c1ab56604f3109cf6327f29b80dc37 --- /dev/null +++ b/images/Shaft_04815.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f78edb9b579ec2b47b05c959f452ee82278fea4de9ee223addbd5bf5bccfdcff +size 83182 diff --git a/images/Shaft_04816.png b/images/Shaft_04816.png new file mode 100644 index 0000000000000000000000000000000000000000..8bf68f16f46b6461f3083bd4ab20307df81cd8dd --- /dev/null +++ b/images/Shaft_04816.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5da855b7bba45e1f3b934d27b95e289f24e3868cae8c2d0fb2604c21b9acba48 +size 82541 diff --git a/images/Shaft_04817.png b/images/Shaft_04817.png new file mode 100644 index 0000000000000000000000000000000000000000..1c7555e04c2eb4a80ed9deb757563dc1b6a4f2de --- /dev/null +++ b/images/Shaft_04817.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ccf2866aea70e9b1a492afc76185c452c1975dbe4efb2b2050c692ca57cb1c9d +size 83100 diff --git a/images/Shaft_04818.png b/images/Shaft_04818.png new file mode 100644 index 0000000000000000000000000000000000000000..3ae23007d8861a6931961faefb4b74b88aec2fe9 --- /dev/null +++ b/images/Shaft_04818.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:49e94a884a26f2c11f836949e2e081fb728b9eb342c6187b0fcb220a72e95bc6 +size 74683 diff --git a/images/Shaft_04819.png b/images/Shaft_04819.png new file mode 100644 index 0000000000000000000000000000000000000000..20621ee009af4d7c800c5fe1045451764c432ff2 --- /dev/null +++ b/images/Shaft_04819.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b5730c07797dfcb7011fc38c04bbd933f5af82b0122ea72c28a442d099c63c51 +size 72587 diff --git a/images/Shaft_04820.png b/images/Shaft_04820.png new file mode 100644 index 0000000000000000000000000000000000000000..8561add202a306fef848848c4d4235b0a6acc919 --- /dev/null +++ b/images/Shaft_04820.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6a49517ba67a4d8b175f74726f304d74612803638c6ef840c1c458959f8fc91d +size 93062 diff --git a/images/Shaft_04821.png b/images/Shaft_04821.png new file mode 100644 index 0000000000000000000000000000000000000000..c7576e55a20c10e670f6e283d251e9b518a022d4 --- /dev/null +++ b/images/Shaft_04821.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:222dd776ffb266110e395d4d27a1ebab647f85355d94d07826533f91313de1f0 +size 88794 diff --git a/images/Shaft_04822.png b/images/Shaft_04822.png new file mode 100644 index 0000000000000000000000000000000000000000..b3b1b4ca125f72320974db383ac17307c240ada9 --- /dev/null +++ b/images/Shaft_04822.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:42547c2ddd0b6d1ef5becd37310bb184261ede81dd0438fb1a2b3808d41122a8 +size 102007 diff --git a/images/Shaft_04823.png b/images/Shaft_04823.png new file mode 100644 index 0000000000000000000000000000000000000000..3ea3ee5b3efab5380180421ad61b5ea57ef00bb4 --- /dev/null +++ b/images/Shaft_04823.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6291cc0363489ce9866de48a4f31aa6e6159d28d87eed88cf64d208d661037e3 +size 93984 diff --git a/images/Shaft_04824.png b/images/Shaft_04824.png new file mode 100644 index 0000000000000000000000000000000000000000..b4f21c2c2716e63dc9a30dd688e866ff39f2c835 --- /dev/null +++ b/images/Shaft_04824.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:39e4d66c48a833fa9619af943f33da1f307851a228437df059d6e2040880c06d +size 94763 diff --git a/images/Shaft_04825.png b/images/Shaft_04825.png new file mode 100644 index 0000000000000000000000000000000000000000..2c8f1237cb6febde799b7ad1988782d7fa831442 --- /dev/null +++ b/images/Shaft_04825.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c17e27ae13770d3de04405da09bced21df4317b4250d388a21c4e179965dfa9b +size 101916 diff --git a/images/Shaft_04826.png b/images/Shaft_04826.png new file mode 100644 index 0000000000000000000000000000000000000000..f877651e3144e9c92b57936d07d03b9fb0e43ee2 --- /dev/null +++ b/images/Shaft_04826.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7edd70fcec67f9cb5f7f6e43b87a56ce05a1fa154d9574f48cc5651c3fb8b335 +size 78470 diff --git a/images/Shaft_04827.png b/images/Shaft_04827.png new file mode 100644 index 0000000000000000000000000000000000000000..5f0b9eb32526944fb7956ea271b6bb7f9bef0135 --- /dev/null +++ b/images/Shaft_04827.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2b46c00b47f918e114c57b56eadd73279f977b28d3cd8442f0990b93a34f378d +size 71527 diff --git a/images/Shaft_04828.png b/images/Shaft_04828.png new file mode 100644 index 0000000000000000000000000000000000000000..c05662b8df1bb986fbd129d99319be7311a4deed --- /dev/null +++ b/images/Shaft_04828.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5feda1693448b90dde0de00477da87c2971af44279b9660d62afec40f4577b3 +size 93186 diff --git a/images/Shaft_04829.png b/images/Shaft_04829.png new file mode 100644 index 0000000000000000000000000000000000000000..7531f625eeeba55f2fd20ca8741269f16eae2264 --- /dev/null +++ b/images/Shaft_04829.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1aa2c64d5a5e801c3a3367562622fd6e6958d8ae28170c67e4cdf4ce3eea5840 +size 68364 diff --git a/images/Shaft_04830.png b/images/Shaft_04830.png new file mode 100644 index 0000000000000000000000000000000000000000..bf8c39031aa942421ed0a2ae10929d46d8bbc8dc --- /dev/null +++ b/images/Shaft_04830.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0474406aefe20309e0cd9da783345ad0b4e1c328d40db5bbf55100e26e5500ad +size 90384 diff --git a/images/Shaft_04831.png b/images/Shaft_04831.png new file mode 100644 index 0000000000000000000000000000000000000000..158ffb94c8bdc060aec27043175e4395e207a91a --- /dev/null +++ b/images/Shaft_04831.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af56d44981e82d8e9088d05807c19bf2bcce53239948356c44a6b531086d6a6c +size 93695 diff --git a/images/Shaft_04832.png b/images/Shaft_04832.png new file mode 100644 index 0000000000000000000000000000000000000000..794bd927a617ee03d8a39750527dd22b84488e7b --- /dev/null +++ b/images/Shaft_04832.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf9ad880d817d997ab053048296cdb3ccb503cb98cba87a4d44ae6fe8eac8c84 +size 83584 diff --git a/images/Shaft_04833.png b/images/Shaft_04833.png new file mode 100644 index 0000000000000000000000000000000000000000..6b3525d17f4b378b080b2912c5cac637da77d0c6 --- /dev/null +++ b/images/Shaft_04833.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4c748501262eba21eead840f972952c36ddbd0e5936a4f30569f24a8882234a2 +size 99766 diff --git a/images/Shaft_04834.png b/images/Shaft_04834.png new file mode 100644 index 0000000000000000000000000000000000000000..44c4126250621f869193ff10b5679d2a77ec8785 --- /dev/null +++ b/images/Shaft_04834.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aba307333883f8246a6874c5cb4808f6bf2fc35efec7e4172c3ef75855aef07a +size 82052 diff --git a/images/Shaft_04835.png b/images/Shaft_04835.png new file mode 100644 index 0000000000000000000000000000000000000000..73615fd08343d2ff3edd7b7c9cddf7f6986c10d0 --- /dev/null +++ b/images/Shaft_04835.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b3d1a6062fd0c115340a3a3bb443b0519f0396f5f1293cf0947dad1684cd5b7b +size 83001 diff --git a/images/Shaft_04836.png b/images/Shaft_04836.png new file mode 100644 index 0000000000000000000000000000000000000000..b02157a83d6853330e16d9fa5e8811ec56d38880 --- /dev/null +++ b/images/Shaft_04836.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:41cc04d7b4c4dd9604386e79c73db4e709437654b665b6a718dc03d3259751b0 +size 72989 diff --git a/images/Shaft_04837.png b/images/Shaft_04837.png new file mode 100644 index 0000000000000000000000000000000000000000..d14e524e1beb03906f9ad6b9340935c9044a91bb --- /dev/null +++ b/images/Shaft_04837.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aa3a49f563641a47881a6c7124006f218c3cb78cf151f4d46fbe1d6da662e177 +size 83049 diff --git a/images/Shaft_04838.png b/images/Shaft_04838.png new file mode 100644 index 0000000000000000000000000000000000000000..f1e09c3f6c49c3c7666d415f2ba6266ce87d3f2a --- /dev/null +++ b/images/Shaft_04838.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ecc6777b7ab030ef7c5a9001cb30d24ef07e6c97d753df5a22715025f95b7f00 +size 105908 diff --git a/images/Shaft_04839.png b/images/Shaft_04839.png new file mode 100644 index 0000000000000000000000000000000000000000..2ca5ce5ebf81d7632357c339eecddd14ff46e8b7 --- /dev/null +++ b/images/Shaft_04839.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8ab16249ce3723b962655209aab34a3cfe78fc02345d81fffac698ac14dc5433 +size 72724 diff --git a/images/Shaft_04840.png b/images/Shaft_04840.png new file mode 100644 index 0000000000000000000000000000000000000000..8bfe7ccda3899c3892f60504b963194b2eb538f0 --- /dev/null +++ b/images/Shaft_04840.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8163302d7f88b2f15786e5b86a10c8ab28a7ab930ef86632312337b564e28d1a +size 69665 diff --git a/images/Shaft_04841.png b/images/Shaft_04841.png new file mode 100644 index 0000000000000000000000000000000000000000..2504128d84704684b156b3c26dc7cbf7c9b09716 --- /dev/null +++ b/images/Shaft_04841.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a696c164442bab9734ab412497cbfe6694155e517f9cd641c78943f765ac041 +size 66615 diff --git a/images/Shaft_04842.png b/images/Shaft_04842.png new file mode 100644 index 0000000000000000000000000000000000000000..2a086e7a9b3d97ea4487c9dc6e789fcbd0ebbf89 --- /dev/null +++ b/images/Shaft_04842.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:02e0faec73c2a4cbf6b784ff3a42bc3ea31ebb26f868de8c45fe7df856483fdf +size 65653 diff --git a/images/Shaft_04843.png b/images/Shaft_04843.png new file mode 100644 index 0000000000000000000000000000000000000000..791956216a37bd08bcb5ab88fc53b03300d663fb --- /dev/null +++ b/images/Shaft_04843.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f56801ce28a65a6d97a5becf93f93ca4d1a618543d29721e8705285ec435d39a +size 86970 diff --git a/images/Shaft_04844.png b/images/Shaft_04844.png new file mode 100644 index 0000000000000000000000000000000000000000..154cb6ad2ebde75dd9cfac4c178a94082d56fd93 --- /dev/null +++ b/images/Shaft_04844.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:006b13f72d5ac35df83c0754188d02863890d0ea8cc054db7d7f2dbbea486a33 +size 82825 diff --git a/images/Shaft_04845.png b/images/Shaft_04845.png new file mode 100644 index 0000000000000000000000000000000000000000..004e743c84b5d9a0784f30a7a89ac6357ace1748 --- /dev/null +++ b/images/Shaft_04845.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6e42bad18776511562c283f865d453af612e0650df4cd69bb08311ca1808563 +size 69844 diff --git a/images/Shaft_04846.png b/images/Shaft_04846.png new file mode 100644 index 0000000000000000000000000000000000000000..5dff48d0edf93e42950069d711a0d6a37d34995f --- /dev/null +++ b/images/Shaft_04846.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b79e136e40369495a4df578efed33ba162f17f12f9145fd26db028d8fdfafc04 +size 85098 diff --git a/images/Shaft_04847.png b/images/Shaft_04847.png new file mode 100644 index 0000000000000000000000000000000000000000..c40808a3da24f35fba62ec50ad652fcd0e2dbb0b --- /dev/null +++ b/images/Shaft_04847.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bc6dda1c7814278428ce975e3ce8fcb7f4be86bb0370457ad1684b55ae6f95d3 +size 102881 diff --git a/images/Shaft_04848.png b/images/Shaft_04848.png new file mode 100644 index 0000000000000000000000000000000000000000..78b57f335b9b914fa311f91ee96607624e08f449 --- /dev/null +++ b/images/Shaft_04848.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1ae1b6139e38c4dc58bacc72c2d054fae3690ddc486cf8ae91c42aa04fbc1e79 +size 64263 diff --git a/images/Shaft_04849.png b/images/Shaft_04849.png new file mode 100644 index 0000000000000000000000000000000000000000..cb628f558ce17cbe5c16ad10f675262f09a4b97f --- /dev/null +++ b/images/Shaft_04849.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dadda4f7d467d63acf3f163e53c3f3839c2b47262dbf3358d2d2d1fb96cf52c2 +size 85167 diff --git a/images/Shaft_04850.png b/images/Shaft_04850.png new file mode 100644 index 0000000000000000000000000000000000000000..65c3f1cff9abb5305b3fb7cde7afdb630f23ba35 --- /dev/null +++ b/images/Shaft_04850.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cb59faf87c70711ddeffb3e1f4677f4149b3e2724fc1d92ab664447640c86349 +size 80925 diff --git a/images/Shaft_04851.png b/images/Shaft_04851.png new file mode 100644 index 0000000000000000000000000000000000000000..b6ed42789619fb9033ea8412f555966192aee0b3 --- /dev/null +++ b/images/Shaft_04851.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1f73e009da7e0274418f792e8fe40f63adccc7f2f19c784a264d310a23b4a21 +size 81673 diff --git a/images/Shaft_04852.png b/images/Shaft_04852.png new file mode 100644 index 0000000000000000000000000000000000000000..f235abf215df5977baaa4c2287582a8f335ce00b --- /dev/null +++ b/images/Shaft_04852.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0dfefae299725cabed00d73a194f64fd622759570a51fd0b8a68f517ae776c73 +size 85034 diff --git a/images/Shaft_04853.png b/images/Shaft_04853.png new file mode 100644 index 0000000000000000000000000000000000000000..b9b8dee888f1183c787f844d5be08733b5d0dd3d --- /dev/null +++ b/images/Shaft_04853.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c6b899aea58a05d5708d9a7fb67d56da69ce69608e2f19797acfdb2cb89af8fd +size 74333 diff --git a/images/Shaft_04854.png b/images/Shaft_04854.png new file mode 100644 index 0000000000000000000000000000000000000000..034f50e5ce9302302fa9c50ae2649de741f30349 --- /dev/null +++ b/images/Shaft_04854.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:692621c8c54be2dda7c9a7fbdf0861aebdd57f6f5e967e488e5841b851d9b489 +size 91555 diff --git a/images/Shaft_04855.png b/images/Shaft_04855.png new file mode 100644 index 0000000000000000000000000000000000000000..4d561665290ee09cc04463d71423bfcbe1f983f6 --- /dev/null +++ b/images/Shaft_04855.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cecf0a9e9b68dc660e369f478cfc53483d9f644070e1a5904b2d52cdf878d466 +size 83020 diff --git a/images/Shaft_04856.png b/images/Shaft_04856.png new file mode 100644 index 0000000000000000000000000000000000000000..1c909ebd568a580b7e3d4130ca083827247c31af --- /dev/null +++ b/images/Shaft_04856.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e790343c6d0bfc4445aefc71d0008dbbb5971769aec61c6a297f06556a07ad1b +size 88147 diff --git a/images/Shaft_04857.png b/images/Shaft_04857.png new file mode 100644 index 0000000000000000000000000000000000000000..6a0f737c2a643415337b7b29b34b31e2f9ada495 --- /dev/null +++ b/images/Shaft_04857.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bb01480b1e8a71b09b5e74c3608fd2ead3f791c508086c628615dd17103fd16c +size 103342 diff --git a/images/Shaft_04858.png b/images/Shaft_04858.png new file mode 100644 index 0000000000000000000000000000000000000000..8a99a7b088f044f44a30be144f7d6fefe68e0786 --- /dev/null +++ b/images/Shaft_04858.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7971cc7ef7ddb869e5eac3097fe1f661d29f4fdcc3a35a26cd191c3cd5d50148 +size 102954 diff --git a/images/Shaft_04859.png b/images/Shaft_04859.png new file mode 100644 index 0000000000000000000000000000000000000000..1af38ecddd9d44c90afcd30167a8f7a2b57260e9 --- /dev/null +++ b/images/Shaft_04859.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6866edd9e7fe69362786ab399846df6e8b531d3fc13621c01d563df998c3a088 +size 79349 diff --git a/images/Shaft_04860.png b/images/Shaft_04860.png new file mode 100644 index 0000000000000000000000000000000000000000..017bf9a1a15695137481c3d5ab7b27091816f96b --- /dev/null +++ b/images/Shaft_04860.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b34da8ab97be66c3a99f3ebc2c48d4887ee3d48222fe2f54fd520fb0872cbf8 +size 102188 diff --git a/images/Shaft_04861.png b/images/Shaft_04861.png new file mode 100644 index 0000000000000000000000000000000000000000..e8190cad4c0ec00c99dd2e598e6ffb7d14b33316 --- /dev/null +++ b/images/Shaft_04861.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ae9034d69ad4f4a3c27456c041e4aa9d89397f7f3ea873d8fd352984b3d29132 +size 73338 diff --git a/images/Shaft_04862.png b/images/Shaft_04862.png new file mode 100644 index 0000000000000000000000000000000000000000..9eeff14503eb3f950a7905dbb1a4440315c7ac51 --- /dev/null +++ b/images/Shaft_04862.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcc49118a5b1e57ccdc9fbeac5900cb094380c51bb4f7f221a85f75cc299555f +size 91823 diff --git a/images/Shaft_04863.png b/images/Shaft_04863.png new file mode 100644 index 0000000000000000000000000000000000000000..5084406061c3419a2cd97fd393bd60e0f52230bd --- /dev/null +++ b/images/Shaft_04863.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d1d641fb90428ae7ecb40fcf94d1509a432510b5e7413b5476d863825ff2f7c8 +size 70000 diff --git a/images/Shaft_04864.png b/images/Shaft_04864.png new file mode 100644 index 0000000000000000000000000000000000000000..b3ac059fe3643b99347af3e19bf8bfb01abd6cc8 --- /dev/null +++ b/images/Shaft_04864.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b92d95f763ea589d51f0983502a9b02ebe6adea28167568b9a54b18bc436e72c +size 68109 diff --git a/images/Shaft_04865.png b/images/Shaft_04865.png new file mode 100644 index 0000000000000000000000000000000000000000..f54e72c2c510327206d7cc1c9c857be8ab13f94e --- /dev/null +++ b/images/Shaft_04865.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a0ea886c53ca531e894dfd00f0d9c168e77e520f5e3bfe6a98abf7900e279563 +size 74928 diff --git a/images/Shaft_04866.png b/images/Shaft_04866.png new file mode 100644 index 0000000000000000000000000000000000000000..e2ea7f9eb6e146c44d5ff2c95003cf85069f5122 --- /dev/null +++ b/images/Shaft_04866.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b0f1045f077588aee73529f1ea5803c9489945b8729fb61caf6689a73edae22b +size 72160 diff --git a/images/Shaft_04867.png b/images/Shaft_04867.png new file mode 100644 index 0000000000000000000000000000000000000000..4e018b75ee976bec8b39d388e6ac06e33a168d64 --- /dev/null +++ b/images/Shaft_04867.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:28f474900127d381c1fe4a2a45f3dd88afe7eb52e360b5d2e6a5fae1a1ba45bc +size 80978 diff --git a/images/Shaft_04868.png b/images/Shaft_04868.png new file mode 100644 index 0000000000000000000000000000000000000000..69d2b87e6091a27da13c9e7a5e48a542f634fc9f --- /dev/null +++ b/images/Shaft_04868.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bcad77d85129ca963b8ed2d4ccaf0b8725e7fc809d4e66ec0469380916eaa5a2 +size 86685 diff --git a/images/Shaft_04869.png b/images/Shaft_04869.png new file mode 100644 index 0000000000000000000000000000000000000000..c08566e8df056f0b3dc0fd71e2a91fe8e0ea536f --- /dev/null +++ b/images/Shaft_04869.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3cac0e09bcd4dafb180e4b3bcf46705eec0c7b03fae9fbf358903c2298065228 +size 94663 diff --git a/images/Shaft_04870.png b/images/Shaft_04870.png new file mode 100644 index 0000000000000000000000000000000000000000..818657883e0fd2bebd85009ddddfd2c94f728d56 --- /dev/null +++ b/images/Shaft_04870.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23ea79c056a1597d4f70414816f2a2acf7e1e13919ecc6c2ce6308140c4c499b +size 73055 diff --git a/images/Shaft_04871.png b/images/Shaft_04871.png new file mode 100644 index 0000000000000000000000000000000000000000..7b554456529b5baef6727f9ba76eba3e4cd831f1 --- /dev/null +++ b/images/Shaft_04871.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ec403b866bbee461b654b5a2c776c8dd7a6667a099bead5dc2df727253e097d5 +size 79266 diff --git a/images/Shaft_04872.png b/images/Shaft_04872.png new file mode 100644 index 0000000000000000000000000000000000000000..6b94b084d8de6832fd959c28eed544e6f78d6f88 --- /dev/null +++ b/images/Shaft_04872.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f14d5d9479e21a3aba2e55cc98135daa8b2efc9eb6811d380c3b3509f2a73f27 +size 79522 diff --git a/images/Shaft_04873.png b/images/Shaft_04873.png new file mode 100644 index 0000000000000000000000000000000000000000..dc6e14b77ac14b56a873fa4663d5a5f227ab03f6 --- /dev/null +++ b/images/Shaft_04873.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ac4803d8ed38110f163643ec88ac3dc9e07a1dcf2cecf74a1c839b34e18dcc1d +size 91573 diff --git a/images/Shaft_04874.png b/images/Shaft_04874.png new file mode 100644 index 0000000000000000000000000000000000000000..df37d4590abad0a8c4a6895b521098ab912637eb --- /dev/null +++ b/images/Shaft_04874.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e64747fc2fc409a680eea0413eb6632a4a7b6e154759079e2a6b258167a63175 +size 99743 diff --git a/images/Shaft_04875.png b/images/Shaft_04875.png new file mode 100644 index 0000000000000000000000000000000000000000..8be86a99465cd8554b3a0f0c9aac489ca04bd493 --- /dev/null +++ b/images/Shaft_04875.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c2726d1f53770a321bb91a9799428bc91556d1b24fc0da5995c96dd5287981ee +size 71194 diff --git a/images/Shaft_04876.png b/images/Shaft_04876.png new file mode 100644 index 0000000000000000000000000000000000000000..87332dbeff28af96a9786448cfa678c709ef52d7 --- /dev/null +++ b/images/Shaft_04876.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:58b4d73dbfa7edbb76a3651b2ff2ba1cd63bcbfac10b493ca3b951a83212d206 +size 86690 diff --git a/images/Shaft_04877.png b/images/Shaft_04877.png new file mode 100644 index 0000000000000000000000000000000000000000..da8496fd90b5ea1f7ea6f4c8d2ed85ad314a10bb --- /dev/null +++ b/images/Shaft_04877.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a9a81dea53fb35ad09505fb065bed5abd9c6fa293debd9008e876e47e65a075 +size 92240 diff --git a/images/Shaft_04878.png b/images/Shaft_04878.png new file mode 100644 index 0000000000000000000000000000000000000000..c3d8c6c6a5c840b420c481cfb26c5eba9a012072 --- /dev/null +++ b/images/Shaft_04878.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f53bda3f32597d9f869df0c42c9030c575127eac8f776f165475b4cd36dbc160 +size 75742 diff --git a/images/Shaft_04879.png b/images/Shaft_04879.png new file mode 100644 index 0000000000000000000000000000000000000000..8eec2e8dd2c4510c9957d1fc990081424dae4133 --- /dev/null +++ b/images/Shaft_04879.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f5adc34161fadd9b66185953e2f3affbdd9356ea43eba371cd8765c33945deb5 +size 72780 diff --git a/images/Shaft_04880.png b/images/Shaft_04880.png new file mode 100644 index 0000000000000000000000000000000000000000..a8413888a290abb8d3e0734ac95178a8dc574218 --- /dev/null +++ b/images/Shaft_04880.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb31fe2670d1d3e4eb1ce2fea91a6513e8e9b0e6e7fb22d86d5296386d04f93c +size 95616 diff --git a/images/Shaft_04881.png b/images/Shaft_04881.png new file mode 100644 index 0000000000000000000000000000000000000000..48065948c781b9d701d82852a23014ddc5e203b9 --- /dev/null +++ b/images/Shaft_04881.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:84c7e17fd17b29754f0b391d97e2d34febcdcc6a311ad4659fc081084e964591 +size 97112 diff --git a/images/Shaft_04882.png b/images/Shaft_04882.png new file mode 100644 index 0000000000000000000000000000000000000000..91ae21dec7909d68981f212e493eca512d0120bf --- /dev/null +++ b/images/Shaft_04882.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7557c8764da5f0b0e5dfd71296e97f2a5af7ec6640b7ad533fa19d8039a2ae71 +size 81398 diff --git a/images/Shaft_04883.png b/images/Shaft_04883.png new file mode 100644 index 0000000000000000000000000000000000000000..a047b7ad20a6197550d7a492cce0bb7168ad7401 --- /dev/null +++ b/images/Shaft_04883.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f555685750969695a2b2f919f3b7ac98cad1718ab7e4d90777b66440a7ec0110 +size 99086 diff --git a/images/Shaft_04884.png b/images/Shaft_04884.png new file mode 100644 index 0000000000000000000000000000000000000000..15e7551696332433ba545b783ebbf2f448bba9c7 --- /dev/null +++ b/images/Shaft_04884.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5077d73a10433777932a1459b7afd0db511c22a1bfd770622d1099245d0c3da9 +size 83601 diff --git a/images/Shaft_04885.png b/images/Shaft_04885.png new file mode 100644 index 0000000000000000000000000000000000000000..78fcb4a626c6ae2398b762b7d7bc9fdc16e57594 --- /dev/null +++ b/images/Shaft_04885.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1b6870ddb5d90b9c7204555362370a6ac76204a078aa01d75aa3b70a02a99ae7 +size 107063 diff --git a/images/Shaft_04886.png b/images/Shaft_04886.png new file mode 100644 index 0000000000000000000000000000000000000000..a0e26f6b01884f848c33019652fd7c3f93f28d7a --- /dev/null +++ b/images/Shaft_04886.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:618ac0f9500d5f1b3948a171aa83da5e61ea710ad1e4f9692c7c40be18db7c43 +size 78898 diff --git a/images/Shaft_04887.png b/images/Shaft_04887.png new file mode 100644 index 0000000000000000000000000000000000000000..e78fbb9d09257b90978b149db90d5f39fe500e8f --- /dev/null +++ b/images/Shaft_04887.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d2df8d6481e69bea64cfcfca2b1e1349ae3fb11edf0de777a575dc109a77723e +size 95285 diff --git a/images/Shaft_04888.png b/images/Shaft_04888.png new file mode 100644 index 0000000000000000000000000000000000000000..5691c91bd57496fb373b8c7db0f2ab999589d15c --- /dev/null +++ b/images/Shaft_04888.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:df162b3fff3d308548c68a4e8161a9b02304cc0335b9fcd4c8abaf8196eba434 +size 106201 diff --git a/images/Shaft_04889.png b/images/Shaft_04889.png new file mode 100644 index 0000000000000000000000000000000000000000..5c7c1cbc91c4d6d70c751ebe616de007888f53c8 --- /dev/null +++ b/images/Shaft_04889.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa77c429741c44082d9c9d592c53bd282b2f611286e909135191d1fb74edfe22 +size 79906 diff --git a/images/Shaft_04890.png b/images/Shaft_04890.png new file mode 100644 index 0000000000000000000000000000000000000000..e56b8960af540a53215a405d8b8c92961570aab0 --- /dev/null +++ b/images/Shaft_04890.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:878bcab34d51e9bb315fa34d3a4ee835804d341faf016a0f5e866677667d7636 +size 94573 diff --git a/images/Shaft_04891.png b/images/Shaft_04891.png new file mode 100644 index 0000000000000000000000000000000000000000..7da6c42099a7cab314085c95138a1694f1a98ec8 --- /dev/null +++ b/images/Shaft_04891.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:842dda35ab805c01eb93901585b9cb76a67e645848b0448aa4dcc05b0306bf8b +size 101049 diff --git a/images/Shaft_04892.png b/images/Shaft_04892.png new file mode 100644 index 0000000000000000000000000000000000000000..86421f27ad88ae31ba692e6410f443404ca53265 --- /dev/null +++ b/images/Shaft_04892.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5e5b2e0aeaf5777b52918fd672a4cfbf04710cd7aa8de17012afb0d1b063afb3 +size 93195 diff --git a/images/Shaft_04893.png b/images/Shaft_04893.png new file mode 100644 index 0000000000000000000000000000000000000000..7545fee781e238685755c1f16d0c178060f3f842 --- /dev/null +++ b/images/Shaft_04893.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f05ae3f2ef7f9fee6dd186cc67cd73b639db03584e9ce140b29dd8e95df11f18 +size 102056 diff --git a/images/Shaft_04894.png b/images/Shaft_04894.png new file mode 100644 index 0000000000000000000000000000000000000000..dfd48eb7e7b9257b021aef52900657ba52edfd9d --- /dev/null +++ b/images/Shaft_04894.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5bfa683aee3b5efca23d4b54f0f3a27031947a48c1155f6f2c8dcfb8e9179fe +size 78409 diff --git a/images/Shaft_04895.png b/images/Shaft_04895.png new file mode 100644 index 0000000000000000000000000000000000000000..24aeae1e479237fd3a1be26dccfda0769d43755f --- /dev/null +++ b/images/Shaft_04895.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd83dca21e9158e02545625e98d01043f3089f08fc6e1a9aa57f616c5d8a4154 +size 89505 diff --git a/images/Shaft_04896.png b/images/Shaft_04896.png new file mode 100644 index 0000000000000000000000000000000000000000..c01b5c7f1ccd0dad1d150fc5e8c7779ac0b04d3a --- /dev/null +++ b/images/Shaft_04896.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8c72ba58c9c7e55803ef26d8c3150287221f0ce9ca9eee557134147c84730451 +size 80637 diff --git a/images/Shaft_04897.png b/images/Shaft_04897.png new file mode 100644 index 0000000000000000000000000000000000000000..c4be050e3a580edd41813eeff582b15d2458dd7b --- /dev/null +++ b/images/Shaft_04897.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:310f7b551aa1a3aaae702f9d6e38b8e58387e04c8fe5291b29482bd10c0276b2 +size 86925 diff --git a/images/Shaft_04898.png b/images/Shaft_04898.png new file mode 100644 index 0000000000000000000000000000000000000000..b16b82ed5c501ac15bcb2c057e87e19960aaed5a --- /dev/null +++ b/images/Shaft_04898.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06021e812f4e15e5697658ba7025bfdc9b50f23ff7bbaaa8dabf6e55d35cc8df +size 77633 diff --git a/images/Shaft_04899.png b/images/Shaft_04899.png new file mode 100644 index 0000000000000000000000000000000000000000..f3c965475f13ddbb71bc0d60c9fae40b7a671fd2 --- /dev/null +++ b/images/Shaft_04899.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:04125ec511d2580c7654f01a2f3031987cf0b7297f348277963c3a8e5e7aae0f +size 91964 diff --git a/images/Shaft_04900.png b/images/Shaft_04900.png new file mode 100644 index 0000000000000000000000000000000000000000..c5ac22214881f77ddb9c07cafc1d0985cc66f159 --- /dev/null +++ b/images/Shaft_04900.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7cc73dc53839d8af0e8c3388376bdefb027b587243fcd287b94eabce815642f2 +size 114038 diff --git a/images/Shaft_04901.png b/images/Shaft_04901.png new file mode 100644 index 0000000000000000000000000000000000000000..5424faefeb33d2f8daf1adecf239cc672c3379ee --- /dev/null +++ b/images/Shaft_04901.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:29edfa0f06f3fcbc11de6c50e7e4609de82015a14ce7bc72fa5c9e745dbca706 +size 100683 diff --git a/images/Shaft_04902.png b/images/Shaft_04902.png new file mode 100644 index 0000000000000000000000000000000000000000..64d11529a37740d9ba6df506ebbc2f3ffe3c6f9e --- /dev/null +++ b/images/Shaft_04902.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0f0b22ddf06d33d87831302f72b04887ec5dccc9609a49b5ad48bdd0ac1064d3 +size 107081 diff --git a/images/Shaft_04903.png b/images/Shaft_04903.png new file mode 100644 index 0000000000000000000000000000000000000000..2174115e8aec3016a788cfd39c16d11cede00a38 --- /dev/null +++ b/images/Shaft_04903.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:59558ec2489d6a72aefc626079747073f2fb9807471e872cc9e422b2a07bbfab +size 70734 diff --git a/images/Shaft_04904.png b/images/Shaft_04904.png new file mode 100644 index 0000000000000000000000000000000000000000..d9e2b90af50d0ffdbdb1448811e9f409fd2766b4 --- /dev/null +++ b/images/Shaft_04904.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a5e47cf0ca3a2d8b6b115444b68e4f96f1831d51a2cad8c0d7c7558ab20fc6d5 +size 77376 diff --git a/images/Shaft_04905.png b/images/Shaft_04905.png new file mode 100644 index 0000000000000000000000000000000000000000..d63fdd41facaad0a4c1807abd46e09e2d7784e19 --- /dev/null +++ b/images/Shaft_04905.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3d44df8e832aac31ca8b04380fec55e41d1c91227dbc723c22c740381609e4bf +size 121659 diff --git a/images/Shaft_04906.png b/images/Shaft_04906.png new file mode 100644 index 0000000000000000000000000000000000000000..43fb9ae2950202c865b9df081270d3faeafe41cd --- /dev/null +++ b/images/Shaft_04906.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d7e1956b5a01759bb19fd0950640c8af73e637b25552e64cf2cc36d888547564 +size 72703 diff --git a/images/Shaft_04907.png b/images/Shaft_04907.png new file mode 100644 index 0000000000000000000000000000000000000000..b2c9698e00622656111b2b4927359e3127fc9bcd --- /dev/null +++ b/images/Shaft_04907.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d24e293698b18a1b2aa1411d7d7edfd139ad4ec9230063f54eb8261afeeb1045 +size 77183 diff --git a/images/Shaft_04908.png b/images/Shaft_04908.png new file mode 100644 index 0000000000000000000000000000000000000000..7d653163454eb49b807cfc9cbdd18d76ae3796d3 --- /dev/null +++ b/images/Shaft_04908.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5b97fcae222849e970927f91e8015dab8f376dd439fe9c2c17d0d027c6973916 +size 79939 diff --git a/images/Shaft_04909.png b/images/Shaft_04909.png new file mode 100644 index 0000000000000000000000000000000000000000..27c2d4c02f923ac478a28bc897a9c0e3202c61b6 --- /dev/null +++ b/images/Shaft_04909.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:888ebdf64615173f3a11201b39425e8a4c7d4187f2b81162a9a9a5ea5a0b7bc9 +size 101542 diff --git a/images/Shaft_04910.png b/images/Shaft_04910.png new file mode 100644 index 0000000000000000000000000000000000000000..5d643db57a85317c27240a0de694b8a34ad3860f --- /dev/null +++ b/images/Shaft_04910.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e3e9eb2be74ba6446b63d1041c88217a057dd481fcec493b0178c5d6797486ec +size 70802 diff --git a/images/Shaft_04911.png b/images/Shaft_04911.png new file mode 100644 index 0000000000000000000000000000000000000000..37bada7a866571fc7b67bf0c2f3d840a639a9e2d --- /dev/null +++ b/images/Shaft_04911.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0a79689b66ff36961e3131ec1525abcb74003348cc9a67797019870be99e4545 +size 84703 diff --git a/images/Shaft_04912.png b/images/Shaft_04912.png new file mode 100644 index 0000000000000000000000000000000000000000..535ea2f18b5012d61f6dc1aa109e05908c2b0297 --- /dev/null +++ b/images/Shaft_04912.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:851038e31481fe302b5c0dfc8ed46fe610f23087e503c1fbd29ba7d4d6e1a177 +size 79653 diff --git a/images/Shaft_04913.png b/images/Shaft_04913.png new file mode 100644 index 0000000000000000000000000000000000000000..c83f7615e3e111207b2eff19573670689ff9c7c4 --- /dev/null +++ b/images/Shaft_04913.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1494ae9b969549e654034d267609b1f6a8c2307a6ae6f21cc0a50b4ac93f8bb3 +size 78741 diff --git a/images/Shaft_04914.png b/images/Shaft_04914.png new file mode 100644 index 0000000000000000000000000000000000000000..53fe315e8e0d06e7c48ed75a43df1d69b1dd0929 --- /dev/null +++ b/images/Shaft_04914.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d22056186c08f9e070402ab370ed4235ac4abdd5cb379946cbb6d64991bb283c +size 75490 diff --git a/images/Shaft_04915.png b/images/Shaft_04915.png new file mode 100644 index 0000000000000000000000000000000000000000..7784e3c48598ddc56c70de1852c96effb804abad --- /dev/null +++ b/images/Shaft_04915.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ba8d315e2c081c228fc2c5857a5d84e2deb9133fe66dc7c4e4d62c0a18ff1e60 +size 100563 diff --git a/images/Shaft_04916.png b/images/Shaft_04916.png new file mode 100644 index 0000000000000000000000000000000000000000..4563c3582ad929e2e2b72eeda3174e2fd10ac456 --- /dev/null +++ b/images/Shaft_04916.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:379ddf3f25eb520a6c3f39c49706a24e6abad3e30088ac40e1f90545711249b7 +size 84348 diff --git a/images/Shaft_04917.png b/images/Shaft_04917.png new file mode 100644 index 0000000000000000000000000000000000000000..188710abbf8488edb9e3f68e5c89aef623432854 --- /dev/null +++ b/images/Shaft_04917.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de21dfc053bda69c2c3f0b59bec08fb57bdeb2aa0b608592e5cb86e034d85199 +size 85614 diff --git a/images/Shaft_04918.png b/images/Shaft_04918.png new file mode 100644 index 0000000000000000000000000000000000000000..dff8cc8e33a4460a7a12cb86b79e80c1c2b945b3 --- /dev/null +++ b/images/Shaft_04918.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a376e9de31cd8b54896931e75c8f417730c1de418c94a658fbb06d3ca94cffa4 +size 78443 diff --git a/images/Shaft_04919.png b/images/Shaft_04919.png new file mode 100644 index 0000000000000000000000000000000000000000..597f33668e7cc7c3a8ab4cbb1faa708293f86ae8 --- /dev/null +++ b/images/Shaft_04919.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:06bf7b8547eaa9aa450efd178e90d4e3bc3be310054fede4eea073139a4c0f8c +size 104269 diff --git a/images/Shaft_04920.png b/images/Shaft_04920.png new file mode 100644 index 0000000000000000000000000000000000000000..6895468dd3918ae6af8c108cbd2e3c6a667cffd6 --- /dev/null +++ b/images/Shaft_04920.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:be4682fe756f05d5434ad9940e24cf4a6f9dc448f5657fdde6385f7c10f73f00 +size 77835 diff --git a/images/Shaft_04921.png b/images/Shaft_04921.png new file mode 100644 index 0000000000000000000000000000000000000000..58bc35fd82aebeb0877d9ade6e679adb0b1bcfff --- /dev/null +++ b/images/Shaft_04921.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:91fce01f4c71f232e58584f18281b4d28e783f8130c3f7a5410a4fff3ad9d472 +size 121260 diff --git a/images/Shaft_04922.png b/images/Shaft_04922.png new file mode 100644 index 0000000000000000000000000000000000000000..2c54d9a69c4d1b1c8e7465053355a089f844f25a --- /dev/null +++ b/images/Shaft_04922.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c8a7451d8ad6cabdcf54956ada03100c7ef8b7cb818ed6522fe66af847ee7eda +size 81084 diff --git a/images/Shaft_04923.png b/images/Shaft_04923.png new file mode 100644 index 0000000000000000000000000000000000000000..cf46a639eb1a9e4e2f0e9581d715c7a8ac018bf5 --- /dev/null +++ b/images/Shaft_04923.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bf0079617c1b9953b99829642eb65b0818d33a4366bd580272e0e0b4e75cf5b2 +size 84810 diff --git a/images/Shaft_04924.png b/images/Shaft_04924.png new file mode 100644 index 0000000000000000000000000000000000000000..5c739949de3eb156ca3498f18a5d2216756dab70 --- /dev/null +++ b/images/Shaft_04924.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c0aa52f29be6aa68d49706cd18a8ba3db7bd763586c247c478d73648b92e280b +size 85789 diff --git a/images/Shaft_04925.png b/images/Shaft_04925.png new file mode 100644 index 0000000000000000000000000000000000000000..cbccd4692e7c3554dfd557b5f9b9465ba510cd43 --- /dev/null +++ b/images/Shaft_04925.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f208f74b8d87835ec387562709d7ae4ca6d2885d1a31e96809eb817e5d0d8377 +size 72367 diff --git a/images/Shaft_04926.png b/images/Shaft_04926.png new file mode 100644 index 0000000000000000000000000000000000000000..9b34591244ddf4f68ef24baeb39673295968561c --- /dev/null +++ b/images/Shaft_04926.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fa1c882bfeee10ca6e3d176adbc402bafebaf15295c309ffd6b516ed1642d49d +size 68932 diff --git a/images/Shaft_04927.png b/images/Shaft_04927.png new file mode 100644 index 0000000000000000000000000000000000000000..7b90b0afd9f4c619d7155ece66a62333e55cb8bd --- /dev/null +++ b/images/Shaft_04927.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:aadaba3a7ff3c6de80067d210678121420d69af4dfe69a047500f5eab7bea1f1 +size 71793 diff --git a/images/Shaft_04928.png b/images/Shaft_04928.png new file mode 100644 index 0000000000000000000000000000000000000000..6c0978b61063ace7328786536f6bb17eb5b3a5b9 --- /dev/null +++ b/images/Shaft_04928.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd56b3534ad9b46ea56c0afa7b5f545dcaf6d4b353b99d656105a3e510876d86 +size 94148 diff --git a/images/Shaft_04929.png b/images/Shaft_04929.png new file mode 100644 index 0000000000000000000000000000000000000000..14f539cb6a8cdb49a2c8faa318c618f9138c86a5 --- /dev/null +++ b/images/Shaft_04929.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:bd62e027208677a89512a0b3052522c83d58918977aea56508bd478b0dc84b97 +size 74297 diff --git a/images/Shaft_04930.png b/images/Shaft_04930.png new file mode 100644 index 0000000000000000000000000000000000000000..08db757b7b9674060d8fb8b75977ab70c2732d3c --- /dev/null +++ b/images/Shaft_04930.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2e0edcedf80f88b229dcaddcf2d66c166c2ccac5774ef77ba157e0159eae3ade +size 92192 diff --git a/images/Shaft_04931.png b/images/Shaft_04931.png new file mode 100644 index 0000000000000000000000000000000000000000..b342a574dc5875da5f2685f7e25ad7354a155b46 --- /dev/null +++ b/images/Shaft_04931.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7a3e3aca55d40a288866569416ea6fff40b5661f16d530c80f6bfe8d1ba723e0 +size 75971 diff --git a/images/Shaft_04932.png b/images/Shaft_04932.png new file mode 100644 index 0000000000000000000000000000000000000000..b771dd5ae62889f814b4ae791e5c228b5e271c25 --- /dev/null +++ b/images/Shaft_04932.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:569ffa78bb29dba003d8d84dd1772283bc73539d88dc352fec9388e6e5b99120 +size 109320 diff --git a/images/Shaft_04933.png b/images/Shaft_04933.png new file mode 100644 index 0000000000000000000000000000000000000000..6d9556a3621bf9aa05dad9828399eb9bdb20734a --- /dev/null +++ b/images/Shaft_04933.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b87ac2459e034ca959157e6317f655f59bdc7486c92d58ad717ab87a8193c974 +size 67010 diff --git a/images/Shaft_04934.png b/images/Shaft_04934.png new file mode 100644 index 0000000000000000000000000000000000000000..e37411971e076dff1f652b9828619df13fa70c25 --- /dev/null +++ b/images/Shaft_04934.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:38d92fbf79f5670bcb3fca8383598f3acc5601deb7d969242185a5c82529f187 +size 80256 diff --git a/images/Shaft_04935.png b/images/Shaft_04935.png new file mode 100644 index 0000000000000000000000000000000000000000..12f1e5b0b8c0f054ebab4f9f4a2de104ed5e175e --- /dev/null +++ b/images/Shaft_04935.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6f6ad06aa53f0715865af1c237c9cfb78b5cbec3824bbd784a9e61ecd544a2b0 +size 69453 diff --git a/images/Shaft_04936.png b/images/Shaft_04936.png new file mode 100644 index 0000000000000000000000000000000000000000..5c8dd5456e7f66a61e7462d52277c465e1b2b7f5 --- /dev/null +++ b/images/Shaft_04936.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:73ce844d2dab5843fc17c3a2ce38d032587f50a101bc9267db5f4d02d8e2c78b +size 70142 diff --git a/images/Shaft_04937.png b/images/Shaft_04937.png new file mode 100644 index 0000000000000000000000000000000000000000..444e8decaff9f318fc3291f7ad064ad432ac31f8 --- /dev/null +++ b/images/Shaft_04937.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23d1f5c90f0e6567c697715c64fd8e5340a504d029a200d2c7ff385e54d7abdf +size 70464 diff --git a/images/Shaft_04938.png b/images/Shaft_04938.png new file mode 100644 index 0000000000000000000000000000000000000000..24bfa9c6e8e778f6dfbcd9eb4a76d2cf728b2e0a --- /dev/null +++ b/images/Shaft_04938.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d5cb041a4651a505c35d1614670c8de0414c4c10f3a7749b01e11c8cc8dbf58 +size 88744 diff --git a/images/Shaft_04939.png b/images/Shaft_04939.png new file mode 100644 index 0000000000000000000000000000000000000000..103cfc390177225df8635ac8adad371962186fbc --- /dev/null +++ b/images/Shaft_04939.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3c227b8377e0adeb932b6878a654754e68bf3ab904128ba18d7130578da0569c +size 86806 diff --git a/images/Shaft_04940.png b/images/Shaft_04940.png new file mode 100644 index 0000000000000000000000000000000000000000..9772ec32823d0c16b79457771f276d251455725d --- /dev/null +++ b/images/Shaft_04940.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:318d61f64fcc7fd9838c67b77a1553b8c251ad8dc45c0fa6a8e348bf494d9468 +size 94138 diff --git a/images/Shaft_04941.png b/images/Shaft_04941.png new file mode 100644 index 0000000000000000000000000000000000000000..df1bd9800e96f8c895303750957f0e74d5cb359d --- /dev/null +++ b/images/Shaft_04941.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:af17bdee9963d2c6ec7c587912fd0f4906966d44222fac5d6f0db5cfd06633b5 +size 112022 diff --git a/images/Shaft_04942.png b/images/Shaft_04942.png new file mode 100644 index 0000000000000000000000000000000000000000..2f467d501a873c601c41f43d87829322fadb0958 --- /dev/null +++ b/images/Shaft_04942.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47696f6e0f6906b7a41b8f87dfcd6125a362697f81f82f1c3705ea572220f7cd +size 88491 diff --git a/images/Shaft_04943.png b/images/Shaft_04943.png new file mode 100644 index 0000000000000000000000000000000000000000..206e5ba2a2f563aa138938cc7017f87903501c67 --- /dev/null +++ b/images/Shaft_04943.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e1cb30635f1cebea9e2e69df55daebe62e1d73e695e85ba239db31bc74dbec46 +size 101561 diff --git a/images/Shaft_04944.png b/images/Shaft_04944.png new file mode 100644 index 0000000000000000000000000000000000000000..7a3e3cc9d2e18d9c6d42bbbdf2579bdf38292329 --- /dev/null +++ b/images/Shaft_04944.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b60856d2ab657608e28d6c410e80f3a3a68f959f45d3b38b0ba5618dc2834a70 +size 87134 diff --git a/images/Shaft_04945.png b/images/Shaft_04945.png new file mode 100644 index 0000000000000000000000000000000000000000..8e3b1f48e11f665364eef34e0132c8b95a4ea873 --- /dev/null +++ b/images/Shaft_04945.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3ffda8be2182e710401599b146b0918ce269ae7b0bd1b63d222d9919f2d468ab +size 85264 diff --git a/images/Shaft_04946.png b/images/Shaft_04946.png new file mode 100644 index 0000000000000000000000000000000000000000..f477530602e570e26213eeb6c89fc830a18a7902 --- /dev/null +++ b/images/Shaft_04946.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ed33281ec2e7dfedf4c472c0cffd90bae0ea0f7ff10ed164dc29db21e79ffc9c +size 94013 diff --git a/images/Shaft_04947.png b/images/Shaft_04947.png new file mode 100644 index 0000000000000000000000000000000000000000..703cb60c22401546bad7aac5c37a4d6807281a44 --- /dev/null +++ b/images/Shaft_04947.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:371cbd660a609947a8b1dcf621eee28946e122130060a8daf02944d7849f5810 +size 69236 diff --git a/images/Shaft_04948.png b/images/Shaft_04948.png new file mode 100644 index 0000000000000000000000000000000000000000..f102b1063abe454d4133ba30e3e25d45d126d001 --- /dev/null +++ b/images/Shaft_04948.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c3e56d765c710217c95a45c398420e920f5bcc371d6f464a666ab88da2f218cc +size 107550 diff --git a/images/Shaft_04949.png b/images/Shaft_04949.png new file mode 100644 index 0000000000000000000000000000000000000000..b362eac3d9aedb8af7e2d41ed84e3fe4553632ce --- /dev/null +++ b/images/Shaft_04949.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:159c0b215e494e4fcf23a1b2c3f97fa8e2482233bd9695d9da306fbc725a7c63 +size 74542 diff --git a/images/Shaft_04950.png b/images/Shaft_04950.png new file mode 100644 index 0000000000000000000000000000000000000000..7e342757b40d1fb1dafd894416d2d6f065d39c40 --- /dev/null +++ b/images/Shaft_04950.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53d9ffff553136e8d00d9089b08e538bcab2671cbef1899fe4dca610a6fd6e35 +size 82723 diff --git a/images/Shaft_04951.png b/images/Shaft_04951.png new file mode 100644 index 0000000000000000000000000000000000000000..4fadb0a5addde791c16255df57033c3e6a3e0b77 --- /dev/null +++ b/images/Shaft_04951.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a1428ef8a344d419382df1e5bfd5760a74cd60a65f216af44301b877a2b3e8c +size 84886 diff --git a/images/Shaft_04952.png b/images/Shaft_04952.png new file mode 100644 index 0000000000000000000000000000000000000000..020dbc7d61c098c177c38c120eca264d74db2d57 --- /dev/null +++ b/images/Shaft_04952.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3b81ca80a00047d3ef6f9c504c744d372f5916ac3d264cd3c2ec2f64d67f2b50 +size 99450 diff --git a/images/Shaft_04953.png b/images/Shaft_04953.png new file mode 100644 index 0000000000000000000000000000000000000000..eb66d122acc6fb96e8cee41ea8b8c960cbf0aebc --- /dev/null +++ b/images/Shaft_04953.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:55fd42e6a53314a39ab32d6c7f39863056440c248d4942d3150b7c04f4701bd3 +size 81301 diff --git a/images/Shaft_04954.png b/images/Shaft_04954.png new file mode 100644 index 0000000000000000000000000000000000000000..a934bcbc2016ce31547c7a32319b12af646d4c69 --- /dev/null +++ b/images/Shaft_04954.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d218d18f42d2670c2722ea71c743c1bfd6aabf197b915951e6304e6836910e00 +size 70829 diff --git a/images/Shaft_04955.png b/images/Shaft_04955.png new file mode 100644 index 0000000000000000000000000000000000000000..0ea79b617280250c7a71670b98173aece2bcbe3a --- /dev/null +++ b/images/Shaft_04955.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:94aa680256bdc2e78f1d152eaf530edfc94008ec59737b8c702f047f26c04211 +size 73405 diff --git a/images/Shaft_04956.png b/images/Shaft_04956.png new file mode 100644 index 0000000000000000000000000000000000000000..e3603e01cd410ade4240211f5887292352cc2e60 --- /dev/null +++ b/images/Shaft_04956.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:975a85c827ac463b1886a6a402961c84d2c24811e1c6119b161f36b69af8df6d +size 86528 diff --git a/images/Shaft_04957.png b/images/Shaft_04957.png new file mode 100644 index 0000000000000000000000000000000000000000..84c4b918e0894176a1c48d9015c914dc105f83fb --- /dev/null +++ b/images/Shaft_04957.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e5f667124298d5b178c1ba42d3c9e17c7ea468b7b5ba3ec7e5d4befe8140f27a +size 88024 diff --git a/images/Shaft_04958.png b/images/Shaft_04958.png new file mode 100644 index 0000000000000000000000000000000000000000..0f4bcf479c59aee76bed9be01a5729d8eb426234 --- /dev/null +++ b/images/Shaft_04958.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ea1048286cadcf62061d13de15c1280dbf6e61ffc27c758e783cff92cef94ce2 +size 93613 diff --git a/images/Shaft_04959.png b/images/Shaft_04959.png new file mode 100644 index 0000000000000000000000000000000000000000..460147b9088d0e2fe94f27c251932f2195aa4fea --- /dev/null +++ b/images/Shaft_04959.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:74c4bd330e8635edc46be1569a768ffedb806955889989e8bce9e19c47e01df1 +size 90829 diff --git a/images/Shaft_04960.png b/images/Shaft_04960.png new file mode 100644 index 0000000000000000000000000000000000000000..ceedf5940e71f7f1b396325785840593472e867b --- /dev/null +++ b/images/Shaft_04960.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c1e7e13ff15787028f8367a65fd178bcdb3a01b522c3ebaa8843fbb697b9a910 +size 76637 diff --git a/images/Shaft_04961.png b/images/Shaft_04961.png new file mode 100644 index 0000000000000000000000000000000000000000..c1f82795f5c298d10e9ede66c38fc677294c49da --- /dev/null +++ b/images/Shaft_04961.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3212cef678b05611f9892348ca775f8b641f5679e172efb2e9aa50bd2dc4cc96 +size 84031 diff --git a/images/Shaft_04962.png b/images/Shaft_04962.png new file mode 100644 index 0000000000000000000000000000000000000000..59f81ad6a9309119e2e6103a404b02d53feb84f2 --- /dev/null +++ b/images/Shaft_04962.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:64947c3e97be2829259b3f61b245377ccb4f1ac5dcc32de3a00132dcbeba7fb8 +size 74409 diff --git a/images/Shaft_04963.png b/images/Shaft_04963.png new file mode 100644 index 0000000000000000000000000000000000000000..230cfe19be727dd911c3a93abc50561f5a18de49 --- /dev/null +++ b/images/Shaft_04963.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c5bc881f316fd33daa1ed74631766745213c809e4d03499f6561220b5f6d7660 +size 89855 diff --git a/images/Shaft_04964.png b/images/Shaft_04964.png new file mode 100644 index 0000000000000000000000000000000000000000..c0fad2719e8fbac8f8afd3e3717b9770195ed398 --- /dev/null +++ b/images/Shaft_04964.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2befa3ef849f8a6f2f14ca24bc5eedfeb59e3b234c5838de7ea601a3e478191a +size 97294 diff --git a/images/Shaft_04965.png b/images/Shaft_04965.png new file mode 100644 index 0000000000000000000000000000000000000000..5b11c14a5843fc7c635b9d2b2492fde9f260dd40 --- /dev/null +++ b/images/Shaft_04965.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cbdde00470fad200fcf8af9b0d825c16e9a7304eb1f407b4f82bf51ad888be11 +size 94223 diff --git a/images/Shaft_04966.png b/images/Shaft_04966.png new file mode 100644 index 0000000000000000000000000000000000000000..df63c4b56a17851db740ee87f54d381ac316c08c --- /dev/null +++ b/images/Shaft_04966.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:03dcbe28edfb2b74eaba2109957a8f050783eb5509ea2f71ad55556b3c719d78 +size 96899 diff --git a/images/Shaft_04967.png b/images/Shaft_04967.png new file mode 100644 index 0000000000000000000000000000000000000000..29d69770a3ff01db5ca7fee4b243c7be6e62f28b --- /dev/null +++ b/images/Shaft_04967.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eafd364d98f5e034ec57e4f7ddafeb097f5d9ecdb4eb3dfa42d163f5f5dafe84 +size 111232 diff --git a/images/Shaft_04968.png b/images/Shaft_04968.png new file mode 100644 index 0000000000000000000000000000000000000000..906dc2619fce2a0d1460f45798ca0daaf286a2e4 --- /dev/null +++ b/images/Shaft_04968.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:afa97357af8b3b9a511f411479634b44cf0b9ef53776422327796cd531937e10 +size 79201 diff --git a/images/Shaft_04969.png b/images/Shaft_04969.png new file mode 100644 index 0000000000000000000000000000000000000000..e524f8c953dbedefa4dd72b5e7810a22cb086c2d --- /dev/null +++ b/images/Shaft_04969.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6b0eaee73268afcff766c88b91777ec2613169fc8459f30ddc39771b72c8db13 +size 119748 diff --git a/images/Shaft_04970.png b/images/Shaft_04970.png new file mode 100644 index 0000000000000000000000000000000000000000..f6765f3cfc57b31cfc1316f315682dbcacec4ed8 --- /dev/null +++ b/images/Shaft_04970.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:6db68fca88eb1f936a209907ccc568e456270c716d393781a6f750aae9dd7914 +size 113180 diff --git a/images/Shaft_04971.png b/images/Shaft_04971.png new file mode 100644 index 0000000000000000000000000000000000000000..a3229901254523d06551cc52128b1c3c5109eafc --- /dev/null +++ b/images/Shaft_04971.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a6bb8ac473aa979226ca785aa8c898c98185765da020cc66ab2f929a6396d1b8 +size 69673 diff --git a/images/Shaft_04972.png b/images/Shaft_04972.png new file mode 100644 index 0000000000000000000000000000000000000000..2eab5f05c65bf7a713fb7609bb7e0f2d9e862d12 --- /dev/null +++ b/images/Shaft_04972.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a8d7bc1fc7c75dc3081751774baad9e78132d155db6314ab4bbade22007303c +size 79353 diff --git a/images/Shaft_04973.png b/images/Shaft_04973.png new file mode 100644 index 0000000000000000000000000000000000000000..4f26909baae43035048ee4ba38d4782312cf8483 --- /dev/null +++ b/images/Shaft_04973.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b6a000d995dc61a0dedf707f3d5d617a30be379ec73cee6b175a3e7ff925305c +size 109298 diff --git a/images/Shaft_04974.png b/images/Shaft_04974.png new file mode 100644 index 0000000000000000000000000000000000000000..4e848eba326b9ef4658c4ea70cd0fff0008676c1 --- /dev/null +++ b/images/Shaft_04974.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2a9ff9b3256114b99bdf34ba4be58fd160d193ac47309d574d8cbd79408ed8bf +size 105272 diff --git a/images/Shaft_04975.png b/images/Shaft_04975.png new file mode 100644 index 0000000000000000000000000000000000000000..e641a681b64022aa5330b88d650adb98f4b833b5 --- /dev/null +++ b/images/Shaft_04975.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0aba6653efae47949cfdec24827a78dba8fa400872addaee8cc95d50c02ee2e2 +size 122310 diff --git a/images/Shaft_04976.png b/images/Shaft_04976.png new file mode 100644 index 0000000000000000000000000000000000000000..a178dddcacb55c3f459b3914dcb75ba1419575b2 --- /dev/null +++ b/images/Shaft_04976.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9f8282cbde33c9b334f95871ec0a9992f53c031e9a10f79064a065986520b499 +size 73515 diff --git a/images/Shaft_04977.png b/images/Shaft_04977.png new file mode 100644 index 0000000000000000000000000000000000000000..64a920d1ebbcbb77c839fff1d5d2b648b92f231b --- /dev/null +++ b/images/Shaft_04977.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2cd30f4c9e40a351a794d3646b26f86fb2051ab5a0b779a42fcb5f51678e5795 +size 68892 diff --git a/images/Shaft_04978.png b/images/Shaft_04978.png new file mode 100644 index 0000000000000000000000000000000000000000..2131206b5301a725e48e4fe3e512a9148c7c7fa7 --- /dev/null +++ b/images/Shaft_04978.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:8bc5d5d6940e1a76203365ebfbc2e4b63777ef869e0dcb97339185f908cd3801 +size 72835 diff --git a/images/Shaft_04979.png b/images/Shaft_04979.png new file mode 100644 index 0000000000000000000000000000000000000000..5f0dd358213bd4923356a152114bbdab70e0c2b4 --- /dev/null +++ b/images/Shaft_04979.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5878d1c64bbea7cbefcd4dd4cbae9902b83443ea32d58ef31387d7b97710bc5b +size 95941 diff --git a/images/Shaft_04980.png b/images/Shaft_04980.png new file mode 100644 index 0000000000000000000000000000000000000000..f437b7c9767245a72e180da4ffc176c4229dd50e --- /dev/null +++ b/images/Shaft_04980.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:53316edc643b96c9c20dcb2ae43f9e310338bc43d26c6b540ff140b4bd631026 +size 93398 diff --git a/images/Shaft_04981.png b/images/Shaft_04981.png new file mode 100644 index 0000000000000000000000000000000000000000..42292189daec898419eb24a025baf48a6853c6b1 --- /dev/null +++ b/images/Shaft_04981.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4f303116a1807999cbd34baa28e3a35763af3323f55c70fc8d5c1c2716511310 +size 78200 diff --git a/images/Shaft_04982.png b/images/Shaft_04982.png new file mode 100644 index 0000000000000000000000000000000000000000..f29b7003aba8fd3938a6b5e3546198a7c8ff5906 --- /dev/null +++ b/images/Shaft_04982.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e11aecb3583db70c6546bfeb2112b2fac49e18e29ec582594d4bce43d77acfb +size 100939 diff --git a/images/Shaft_04983.png b/images/Shaft_04983.png new file mode 100644 index 0000000000000000000000000000000000000000..75c998d8c39dfd3085e762569939f9a970d894fa --- /dev/null +++ b/images/Shaft_04983.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8f7f07d14deb2d3fa44479da455472b8b6392a236bbdd27b40f8e7803733ea1 +size 68129 diff --git a/images/Shaft_04984.png b/images/Shaft_04984.png new file mode 100644 index 0000000000000000000000000000000000000000..3a299092417d754ddaebf5c7c7e131cd3db4caf3 --- /dev/null +++ b/images/Shaft_04984.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c921c04b8049e2e14877609afb4e6453ff9ec6e444b103b4a609716f44349e7e +size 77792 diff --git a/images/Shaft_04985.png b/images/Shaft_04985.png new file mode 100644 index 0000000000000000000000000000000000000000..35a701ca5e1c334d3e1e843762275b101967834b --- /dev/null +++ b/images/Shaft_04985.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:355bf2af0dfad723aa56dcd4b558d1e0bdb3008921226692fd881b35603ff991 +size 70763 diff --git a/images/Shaft_04986.png b/images/Shaft_04986.png new file mode 100644 index 0000000000000000000000000000000000000000..1c8e54beb04cb2ed67dc789b9007e9925b630d98 --- /dev/null +++ b/images/Shaft_04986.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:e6bbc14a733e0a3a2da8c0286670b63694fafcef3e2b384f4760c4f0b10af98d +size 71940 diff --git a/images/Shaft_04987.png b/images/Shaft_04987.png new file mode 100644 index 0000000000000000000000000000000000000000..f1fd01267f2d0c6aa4f7d9bfe32637e266c3ce29 --- /dev/null +++ b/images/Shaft_04987.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:f1ee9b72d2a77af93157b9a38bcf0fdb6dcd5e628a10e74863b81d81668ede1e +size 92734 diff --git a/images/Shaft_04988.png b/images/Shaft_04988.png new file mode 100644 index 0000000000000000000000000000000000000000..085d107059f5e86028587afab7b898875fb20f66 --- /dev/null +++ b/images/Shaft_04988.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:47e6603e59f425665a7914ed2da0daca5f75b633db30f45ce7b6469ed50e8f6c +size 88438 diff --git a/images/Shaft_04989.png b/images/Shaft_04989.png new file mode 100644 index 0000000000000000000000000000000000000000..22ec8b39393a17d3828fc2396cd9a8edd242e5cb --- /dev/null +++ b/images/Shaft_04989.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:a8ea0a3ae29502f43d7998779417d13401630de7a1c7881397e564ab63de424c +size 87652 diff --git a/images/Shaft_04990.png b/images/Shaft_04990.png new file mode 100644 index 0000000000000000000000000000000000000000..1e974285ac5dbf03e381162a0eb0bf5d43b9ec0f --- /dev/null +++ b/images/Shaft_04990.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:75ba375b411980fa3937386aff5d53fc510a6c9ea6c6a1072af0352a7b031af5 +size 86326 diff --git a/images/Shaft_04991.png b/images/Shaft_04991.png new file mode 100644 index 0000000000000000000000000000000000000000..fb38894f8ef45ff0fc87ea4ffd242c69800b6597 --- /dev/null +++ b/images/Shaft_04991.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:21d4332462e531ab77da1ab3d08fee4d16ede4ed80e07f3e2152803e90243d00 +size 73839 diff --git a/images/Shaft_04992.png b/images/Shaft_04992.png new file mode 100644 index 0000000000000000000000000000000000000000..28b2b0528d68c3170d04b64f90dd39338320fc79 --- /dev/null +++ b/images/Shaft_04992.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:3e2acc52ec32040b60e21b164ca5942e040073d571cc52929bae27b5f9e499d3 +size 73770 diff --git a/images/Shaft_04993.png b/images/Shaft_04993.png new file mode 100644 index 0000000000000000000000000000000000000000..69ef05770863117f76744f856a31a9d6c29b692d --- /dev/null +++ b/images/Shaft_04993.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:fe7c769fe3936a42fe43b1912db0e34312e5e9457b5ab16d58e0e33e142d7277 +size 75281 diff --git a/images/Shaft_04994.png b/images/Shaft_04994.png new file mode 100644 index 0000000000000000000000000000000000000000..6a89e1fccef1a0fa951c43ff6ba0cc4053e24a82 --- /dev/null +++ b/images/Shaft_04994.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:cf2b6517cacf5093a97c95125248ab35c54e6b30df179cd5c0450773954ac2a4 +size 91510 diff --git a/images/Shaft_04995.png b/images/Shaft_04995.png new file mode 100644 index 0000000000000000000000000000000000000000..9e0aa240169cbfe57e97a97781b33fdb5b29a99b --- /dev/null +++ b/images/Shaft_04995.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4d4a7597dc22468463ac786550eef3d872f5afc83ad447e197457dcc3200b679 +size 78556 diff --git a/images/Shaft_04996.png b/images/Shaft_04996.png new file mode 100644 index 0000000000000000000000000000000000000000..268acf7ed9c25cb235bf84cf30ef0cd60b434e3d --- /dev/null +++ b/images/Shaft_04996.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c4a65897c2a51f4716301d8ddd1a92a1a0b65f4d3667ed5007f80489e6d7c52e +size 111127 diff --git a/images/Shaft_04997.png b/images/Shaft_04997.png new file mode 100644 index 0000000000000000000000000000000000000000..2a7f72ea18016b9e04ee097dfa3a3e3fc5476c9b --- /dev/null +++ b/images/Shaft_04997.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:4037b7430e3a6058d5c1ebae2b45c98dc8e9dd80159534700131d8d4a5b35388 +size 80689 diff --git a/images/Shaft_04998.png b/images/Shaft_04998.png new file mode 100644 index 0000000000000000000000000000000000000000..9962539c784cbe5b9d202d9f30f22067b228463f --- /dev/null +++ b/images/Shaft_04998.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:d3ab3c24a225a21659ae427558f29f6e0eac5a2a8c242b7f91608d3809c88817 +size 69661 diff --git a/images/Shaft_04999.png b/images/Shaft_04999.png new file mode 100644 index 0000000000000000000000000000000000000000..75dd03136c1716819efe0e12ca6a77556ccb7dfc --- /dev/null +++ b/images/Shaft_04999.png @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:95b527c1ae89db2efd24b326a13534e880171fb8956430efc814308294755b88 +size 84468 diff --git a/test.jsonl b/test.jsonl new file mode 100644 index 0000000000000000000000000000000000000000..3ac6a0f14066553f350b44d80329c9cb499bfe1d --- /dev/null +++ b/test.jsonl @@ -0,0 +1,250 @@ +{"id": "Shaft_04460", "images": ["images/Shaft_04460.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.2 mm and length at least 109.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.5 mm over length 11.8 mm (from Z=0.0 to Z=91.8).\n9. Finish turn diameter Ø30.0 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02803", "images": ["images/Shaft_02803.png", "detail_png/Shaft_02803_length.png", "detail_png/Shaft_02803_diam.png", "detail_png/Shaft_02803_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.1 mm and length at least 201.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 180.6 mm (from Z=0.0 to Z=180.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04646", "images": ["images/Shaft_04646.png", "detail_png/Shaft_04646_length.png", "detail_png/Shaft_04646_diam.png", "detail_png/Shaft_04646_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.6 mm and length at least 145.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.7 mm over length 17.4 mm (from Z=0.0 to Z=99.5).\n9. Finish turn diameter Ø33.4 mm over length 28.7 mm (from Z=0.0 to Z=82.1).\n10. Finish turn diameter Ø30.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03566", "images": ["images/Shaft_03566.png", "detail_png/Shaft_03566_length.png", "detail_png/Shaft_03566_diam.png", "detail_png/Shaft_03566_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.7 mm and length at least 150.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.7 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.4 mm over length 57.9 mm (from Z=0.0 to Z=103.5).\n9. Finish turn diameter Ø41.9 mm over length 13.7 mm (from Z=0.0 to Z=45.6).\n10. Finish turn diameter Ø33.9 mm over length 12.1 mm (from Z=0.0 to Z=31.9).\n11. Finish turn diameter Ø30.0 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03531", "images": ["images/Shaft_03531.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.8 mm and length at least 228.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.1 mm over length 47.2 mm (from Z=0.0 to Z=212.5).\n10. Finish turn diameter Ø30.0 mm over length 165.3 mm (from Z=0.0 to Z=165.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01705", "images": ["images/Shaft_01705.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.0 mm and length at least 211.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.3 mm over length 15.4 mm (from Z=0.0 to Z=157.1).\n10. Finish turn diameter Ø37.1 mm over length 40.2 mm (from Z=0.0 to Z=141.7).\n11. Finish turn diameter Ø30.0 mm over length 101.5 mm (from Z=0.0 to Z=101.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02791", "images": ["images/Shaft_02791.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.8 mm and length at least 138.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 49.9 mm (from Z=0.0 to Z=121.9).\n9. Finish turn diameter Ø30.0 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00541", "images": ["images/Shaft_00541.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.0 mm and length at least 132.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.0 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.6 mm over length 25.9 mm (from Z=0.0 to Z=112.8).\n9. Finish turn diameter Ø30.0 mm over length 86.9 mm (from Z=0.0 to Z=86.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03144", "images": ["images/Shaft_03144.png", "detail_png/Shaft_03144_length.png", "detail_png/Shaft_03144_diam.png", "detail_png/Shaft_03144_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.5 mm and length at least 255.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 75.4 mm (from Z=0.0 to Z=185.8).\n10. Finish turn diameter Ø46.9 mm over length 25.5 mm (from Z=0.0 to Z=110.4).\n11. Finish turn diameter Ø31.4 mm over length 61.7 mm (from Z=0.0 to Z=84.9).\n12. Finish turn diameter Ø30.0 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03951", "images": ["images/Shaft_03951.png", "detail_png/Shaft_03951_length.png", "detail_png/Shaft_03951_diam.png", "detail_png/Shaft_03951_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.3 mm and length at least 117.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.0 mm over length 30.3 mm (from Z=0.0 to Z=95.4).\n9. Finish turn diameter Ø30.0 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01302", "images": ["images/Shaft_01302.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.6 mm and length at least 190.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 162.2 mm (from Z=0.0 to Z=162.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04488", "images": ["images/Shaft_04488.png", "detail_png/Shaft_04488_length.png", "detail_png/Shaft_04488_diam.png", "detail_png/Shaft_04488_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.6 mm and length at least 173.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.4 mm over length 43.7 mm (from Z=0.0 to Z=122.0).\n9. Finish turn diameter Ø30.0 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01996", "images": ["images/Shaft_01996.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.9 mm and length at least 246.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 176.5 mm (from Z=0.0 to Z=176.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01954", "images": ["images/Shaft_01954.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.8 mm and length at least 127.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 9.2 mm (from Z=0.0 to Z=9.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.1 mm over length 39.2 mm (from Z=0.0 to Z=113.0).\n9. Finish turn diameter Ø43.6 mm over length 16.6 mm (from Z=0.0 to Z=73.8).\n10. Finish turn diameter Ø30.0 mm over length 57.2 mm (from Z=0.0 to Z=57.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03386", "images": ["images/Shaft_03386.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.7 mm and length at least 174.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.7 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 124.2 mm (from Z=0.0 to Z=124.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03283", "images": ["images/Shaft_03283.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.5 mm and length at least 72.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.6 mm over length 21.1 mm (from Z=0.0 to Z=50.1).\n9. Finish turn diameter Ø30.0 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03776", "images": ["images/Shaft_03776.png", "detail_png/Shaft_03776_length.png", "detail_png/Shaft_03776_diam.png", "detail_png/Shaft_03776_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.5 mm and length at least 147.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 63.7 mm (from Z=0.0 to Z=63.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.6 mm (from Z=0.0 to Z=78.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04364", "images": ["images/Shaft_04364.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.8 mm and length at least 92.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.9 mm over length 40.7 mm (from Z=0.0 to Z=68.6).\n9. Finish turn diameter Ø30.0 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02474", "images": ["images/Shaft_02474.png", "detail_png/Shaft_02474_length.png", "detail_png/Shaft_02474_diam.png", "detail_png/Shaft_02474_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.4 mm and length at least 227.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.4 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 21.7 mm (from Z=0.0 to Z=174.2).\n10. Finish turn diameter Ø30.0 mm over length 152.5 mm (from Z=0.0 to Z=152.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00581", "images": ["images/Shaft_00581.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.7 mm and length at least 301.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 117.9 mm (from Z=0.0 to Z=204.4).\n10. Finish turn diameter Ø30.0 mm over length 86.5 mm (from Z=0.0 to Z=86.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04555", "images": ["images/Shaft_04555.png", "detail_png/Shaft_04555_length.png", "detail_png/Shaft_04555_diam.png", "detail_png/Shaft_04555_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.1 mm and length at least 283.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 90.5 mm (from Z=0.0 to Z=90.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 187.9 mm (from Z=0.0 to Z=187.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02669", "images": ["images/Shaft_02669.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.1 mm and length at least 271.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.2 mm over length 102.2 mm (from Z=0.0 to Z=201.4).\n10. Finish turn diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00876", "images": ["images/Shaft_00876.png", "detail_png/Shaft_00876_length.png", "detail_png/Shaft_00876_diam.png", "detail_png/Shaft_00876_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.3 mm and length at least 218.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 71.0 mm (from Z=0.0 to Z=71.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 142.7 mm (from Z=0.0 to Z=142.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03323", "images": ["images/Shaft_03323.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.2 mm and length at least 106.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.9 mm over length 39.2 mm (from Z=0.0 to Z=80.4).\n9. Finish turn diameter Ø63.4 mm over length 23.8 mm (from Z=0.0 to Z=41.2).\n10. Finish turn diameter Ø53.2 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00843", "images": ["images/Shaft_00843.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.4 mm and length at least 219.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 147.1 mm (from Z=0.0 to Z=147.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04161", "images": ["images/Shaft_04161.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.4 mm and length at least 304.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 239.3 mm (from Z=0.0 to Z=239.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01043", "images": ["images/Shaft_01043.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.9 mm and length at least 116.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.3 mm over length 62.4 mm (from Z=0.0 to Z=93.2).\n9. Finish turn diameter Ø30.0 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04707", "images": ["images/Shaft_04707.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.1 mm and length at least 305.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.7 mm over length 226.5 mm (from Z=0.0 to Z=268.8).\n10. Finish turn diameter Ø30.0 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02855", "images": ["images/Shaft_02855.png", "detail_png/Shaft_02855_length.png", "detail_png/Shaft_02855_diam.png", "detail_png/Shaft_02855_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.4 mm and length at least 193.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 54.3 mm (from Z=0.0 to Z=54.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 10.1 mm (from Z=0.0 to Z=133.8).\n10. Finish turn diameter Ø30.0 mm over length 123.7 mm (from Z=0.0 to Z=123.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02312", "images": ["images/Shaft_02312.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.8 mm and length at least 105.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.5 mm over length 23.5 mm (from Z=0.0 to Z=89.8).\n9. Finish turn diameter Ø30.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01399", "images": ["images/Shaft_01399.png", "detail_png/Shaft_01399_length.png", "detail_png/Shaft_01399_diam.png", "detail_png/Shaft_01399_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.6 mm and length at least 189.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 176.2 mm (from Z=0.0 to Z=176.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03778", "images": ["images/Shaft_03778.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.0 mm and length at least 120.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.9 mm (from Z=0.0 to Z=95.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03921", "images": ["images/Shaft_03921.png", "detail_png/Shaft_03921_length.png", "detail_png/Shaft_03921_diam.png", "detail_png/Shaft_03921_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.1 mm and length at least 160.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.5 mm over length 56.0 mm (from Z=0.0 to Z=120.3).\n9. Finish turn diameter Ø30.0 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02879", "images": ["images/Shaft_02879.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 117.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.8 mm (from Z=0.0 to Z=107.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00924", "images": ["images/Shaft_00924.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 198.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.6 mm (from Z=0.0 to Z=141.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 51.4 mm (from Z=0.0 to Z=51.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03893", "images": ["images/Shaft_03893.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 241.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 224.0 mm (from Z=0.0 to Z=224.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 12.5 mm (from Z=0.0 to Z=12.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00535", "images": ["images/Shaft_00535.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.4 mm and length at least 85.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.8 mm over length 27.8 mm (from Z=0.0 to Z=38.9).\n9. Finish turn diameter Ø30.0 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00247", "images": ["images/Shaft_00247.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.4 mm and length at least 80.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.4 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.4 mm over length 22.9 mm (from Z=0.0 to Z=68.0).\n9. Finish turn diameter Ø39.5 mm over length 31.2 mm (from Z=0.0 to Z=45.1).\n10. Finish turn diameter Ø30.0 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03993", "images": ["images/Shaft_03993.png", "detail_png/Shaft_03993_length.png", "detail_png/Shaft_03993_diam.png", "detail_png/Shaft_03993_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.0 mm and length at least 223.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 54.4 mm (from Z=0.0 to Z=104.8).\n10. Finish turn diameter Ø43.8 mm over length 27.4 mm (from Z=0.0 to Z=50.4).\n11. Finish turn diameter Ø35.1 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03713", "images": ["images/Shaft_03713.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.9 mm and length at least 133.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 6.8 mm (from Z=0.0 to Z=6.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 22.2 mm (from Z=0.0 to Z=121.2).\n9. Finish turn diameter Ø51.6 mm over length 24.4 mm (from Z=0.0 to Z=99.0).\n10. Finish turn diameter Ø36.7 mm over length 28.1 mm (from Z=0.0 to Z=74.6).\n11. Finish turn diameter Ø30.0 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02660", "images": ["images/Shaft_02660.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.8 mm and length at least 292.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 95.1 mm (from Z=0.0 to Z=95.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.9 mm over length 73.0 mm (from Z=0.0 to Z=192.7).\n10. Finish turn diameter Ø61.2 mm over length 13.4 mm (from Z=0.0 to Z=119.7).\n11. Finish turn diameter Ø46.2 mm over length 106.3 mm (from Z=0.0 to Z=106.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02706", "images": ["images/Shaft_02706.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.4 mm and length at least 184.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 159.6 mm (from Z=0.0 to Z=159.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01502", "images": ["images/Shaft_01502.png", "detail_png/Shaft_01502_length.png", "detail_png/Shaft_01502_diam.png", "detail_png/Shaft_01502_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.0 mm and length at least 234.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.0 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 46.8 mm (from Z=0.0 to Z=217.8).\n10. Finish turn diameter Ø46.9 mm over length 38.0 mm (from Z=0.0 to Z=171.0).\n11. Finish turn diameter Ø33.3 mm over length 64.9 mm (from Z=0.0 to Z=133.0).\n12. Finish turn diameter Ø30.0 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03211", "images": ["images/Shaft_03211.png", "detail_png/Shaft_03211_length.png", "detail_png/Shaft_03211_diam.png", "detail_png/Shaft_03211_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.7 mm and length at least 321.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 304.2 mm (from Z=0.0 to Z=304.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02977", "images": ["images/Shaft_02977.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.7 mm and length at least 100.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.8 mm over length 34.1 mm (from Z=0.0 to Z=62.1).\n9. Finish turn diameter Ø35.5 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02113", "images": ["images/Shaft_02113.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.5 mm and length at least 312.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 81.9 mm (from Z=0.0 to Z=282.3).\n10. Finish turn diameter Ø30.0 mm over length 200.4 mm (from Z=0.0 to Z=200.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01177", "images": ["images/Shaft_01177.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.5 mm and length at least 223.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.5 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.3 mm (from Z=0.0 to Z=169.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01833", "images": ["images/Shaft_01833.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.4 mm and length at least 112.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.4 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.2 mm over length 18.4 mm (from Z=0.0 to Z=92.6).\n9. Finish turn diameter Ø53.0 mm over length 7.3 mm (from Z=0.0 to Z=74.2).\n10. Finish turn diameter Ø38.6 mm over length 28.2 mm (from Z=0.0 to Z=66.9).\n11. Finish turn diameter Ø31.5 mm over length 6.0 mm (from Z=0.0 to Z=38.7).\n12. Finish turn diameter Ø30.0 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01898", "images": ["images/Shaft_01898.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.0 mm and length at least 125.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 90.9 mm (from Z=0.0 to Z=90.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03854", "images": ["images/Shaft_03854.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.0 mm and length at least 287.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.1 mm over length 79.0 mm (from Z=0.0 to Z=235.8).\n10. Finish turn diameter Ø31.6 mm over length 74.4 mm (from Z=0.0 to Z=156.8).\n11. Finish turn diameter Ø30.0 mm over length 82.4 mm (from Z=0.0 to Z=82.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03812", "images": ["images/Shaft_03812.png", "detail_png/Shaft_03812_length.png", "detail_png/Shaft_03812_diam.png", "detail_png/Shaft_03812_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.8 mm and length at least 147.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 80.4 mm (from Z=0.0 to Z=80.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.5 mm over length 50.5 mm (from Z=0.0 to Z=61.9).\n9. Finish turn diameter Ø37.5 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04888", "images": ["images/Shaft_04888.png", "detail_png/Shaft_04888_length.png", "detail_png/Shaft_04888_diam.png", "detail_png/Shaft_04888_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.8 mm and length at least 224.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.0 mm over length 39.2 mm (from Z=0.0 to Z=185.3).\n10. Finish turn diameter Ø53.6 mm over length 36.7 mm (from Z=0.0 to Z=146.1).\n11. Finish turn diameter Ø47.2 mm over length 33.8 mm (from Z=0.0 to Z=109.4).\n12. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03732", "images": ["images/Shaft_03732.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.9 mm and length at least 155.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 48.4 mm (from Z=0.0 to Z=121.9).\n9. Finish turn diameter Ø41.6 mm over length 52.5 mm (from Z=0.0 to Z=73.5).\n10. Finish turn diameter Ø30.0 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00796", "images": ["images/Shaft_00796.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.5 mm and length at least 221.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 100.2 mm (from Z=0.0 to Z=100.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.7 mm over length 27.7 mm (from Z=0.0 to Z=116.1).\n10. Finish turn diameter Ø40.6 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03836", "images": ["images/Shaft_03836.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.7 mm and length at least 166.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 64.0 mm (from Z=0.0 to Z=64.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.8 mm over length 48.0 mm (from Z=0.0 to Z=97.2).\n9. Finish turn diameter Ø50.0 mm over length 49.2 mm (from Z=0.0 to Z=49.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00761", "images": ["images/Shaft_00761.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.2 mm and length at least 124.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 114.3 mm (from Z=0.0 to Z=114.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01079", "images": ["images/Shaft_01079.png", "detail_png/Shaft_01079_length.png", "detail_png/Shaft_01079_diam.png", "detail_png/Shaft_01079_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.0 mm and length at least 171.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.7 mm over length 8.9 mm (from Z=0.0 to Z=153.7).\n9. Finish turn diameter Ø49.8 mm over length 41.6 mm (from Z=0.0 to Z=144.8).\n10. Finish turn diameter Ø41.5 mm over length 30.7 mm (from Z=0.0 to Z=103.2).\n11. Finish turn diameter Ø30.5 mm over length 31.2 mm (from Z=0.0 to Z=72.5).\n12. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04651", "images": ["images/Shaft_04651.png", "detail_png/Shaft_04651_length.png", "detail_png/Shaft_04651_diam.png", "detail_png/Shaft_04651_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.3 mm and length at least 176.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.8 mm over length 12.4 mm (from Z=0.0 to Z=144.2).\n10. Finish turn diameter Ø30.0 mm over length 131.8 mm (from Z=0.0 to Z=131.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03814", "images": ["images/Shaft_03814.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.1 mm and length at least 179.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.5 mm over length 91.6 mm (from Z=0.0 to Z=127.3).\n9. Finish turn diameter Ø54.3 mm over length 35.7 mm (from Z=0.0 to Z=35.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00643", "images": ["images/Shaft_00643.png", "detail_png/Shaft_00643_length.png", "detail_png/Shaft_00643_diam.png", "detail_png/Shaft_00643_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.9 mm and length at least 207.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 9.6 mm (from Z=0.0 to Z=156.6).\n10. Finish turn diameter Ø34.1 mm over length 38.9 mm (from Z=0.0 to Z=147.0).\n11. Finish turn diameter Ø30.0 mm over length 108.1 mm (from Z=0.0 to Z=108.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04370", "images": ["images/Shaft_04370.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.1 mm and length at least 130.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.0 mm over length 11.3 mm (from Z=0.0 to Z=109.4).\n9. Finish turn diameter Ø61.3 mm over length 29.5 mm (from Z=0.0 to Z=98.1).\n10. Finish turn diameter Ø52.1 mm over length 34.6 mm (from Z=0.0 to Z=68.6).\n11. Finish turn diameter Ø42.7 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01623", "images": ["images/Shaft_01623.png", "detail_png/Shaft_01623_length.png", "detail_png/Shaft_01623_diam.png", "detail_png/Shaft_01623_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.9 mm and length at least 91.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.8 mm over length 31.9 mm (from Z=0.0 to Z=68.1).\n9. Finish turn diameter Ø30.0 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02722", "images": ["images/Shaft_02722.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.7 mm and length at least 285.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 263.8 mm (from Z=0.0 to Z=263.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04866", "images": ["images/Shaft_04866.png", "detail_png/Shaft_04866_length.png", "detail_png/Shaft_04866_diam.png", "detail_png/Shaft_04866_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.6 mm and length at least 259.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 246.1 mm (from Z=0.0 to Z=246.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02913", "images": ["images/Shaft_02913.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.9 mm and length at least 292.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 216.1 mm (from Z=0.0 to Z=216.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03652", "images": ["images/Shaft_03652.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.2 mm and length at least 152.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.1 mm over length 6.1 mm (from Z=0.0 to Z=139.4).\n9. Finish turn diameter Ø53.7 mm over length 49.2 mm (from Z=0.0 to Z=133.3).\n10. Finish turn diameter Ø40.9 mm over length 25.7 mm (from Z=0.0 to Z=84.1).\n11. Finish turn diameter Ø30.0 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01466", "images": ["images/Shaft_01466.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.8 mm and length at least 261.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.8 mm over length 133.8 mm (from Z=0.0 to Z=133.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.3 mm over length 104.1 mm (from Z=0.0 to Z=122.6).\n10. Finish turn diameter Ø34.6 mm over length 18.5 mm (from Z=0.0 to Z=18.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03210", "images": ["images/Shaft_03210.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.5 mm and length at least 137.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.7 mm over length 18.0 mm (from Z=0.0 to Z=99.7).\n9. Finish turn diameter Ø45.0 mm over length 35.0 mm (from Z=0.0 to Z=81.7).\n10. Finish turn diameter Ø30.0 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03493", "images": ["images/Shaft_03493.png", "detail_png/Shaft_03493_length.png", "detail_png/Shaft_03493_diam.png", "detail_png/Shaft_03493_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.7 mm and length at least 313.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 128.2 mm (from Z=0.0 to Z=274.5).\n10. Finish turn diameter Ø41.8 mm over length 44.6 mm (from Z=0.0 to Z=146.3).\n11. Finish turn diameter Ø37.6 mm over length 16.2 mm (from Z=0.0 to Z=101.7).\n12. Finish turn diameter Ø30.0 mm over length 85.5 mm (from Z=0.0 to Z=85.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00705", "images": ["images/Shaft_00705.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.5 mm and length at least 172.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.5 mm over length 21.5 mm (from Z=0.0 to Z=109.5).\n9. Finish turn diameter Ø35.1 mm over length 39.2 mm (from Z=0.0 to Z=88.0).\n10. Finish turn diameter Ø30.0 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00440", "images": ["images/Shaft_00440.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.1 mm and length at least 308.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.9 mm over length 53.9 mm (from Z=0.0 to Z=257.1).\n10. Finish turn diameter Ø30.0 mm over length 203.2 mm (from Z=0.0 to Z=203.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03142", "images": ["images/Shaft_03142.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.5 mm and length at least 285.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 143.2 mm (from Z=0.0 to Z=143.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.9 mm (from Z=0.0 to Z=136.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00867", "images": ["images/Shaft_00867.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 219.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 189.6 mm (from Z=0.0 to Z=189.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00413", "images": ["images/Shaft_00413.png", "detail_png/Shaft_00413_length.png", "detail_png/Shaft_00413_diam.png", "detail_png/Shaft_00413_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.6 mm and length at least 97.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.6 mm over length 31.3 mm (from Z=0.0 to Z=76.2).\n9. Finish turn diameter Ø34.3 mm over length 6.4 mm (from Z=0.0 to Z=44.9).\n10. Finish turn diameter Ø30.0 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03856", "images": ["images/Shaft_03856.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.8 mm and length at least 118.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.8 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.2 mm over length 19.4 mm (from Z=0.0 to Z=94.9).\n9. Finish turn diameter Ø30.0 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00237", "images": ["images/Shaft_00237.png", "detail_png/Shaft_00237_length.png", "detail_png/Shaft_00237_diam.png", "detail_png/Shaft_00237_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.2 mm and length at least 306.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 18.8 mm (from Z=0.0 to Z=263.8).\n10. Finish turn diameter Ø46.9 mm over length 57.8 mm (from Z=0.0 to Z=245.0).\n11. Finish turn diameter Ø37.8 mm over length 60.2 mm (from Z=0.0 to Z=187.2).\n12. Finish turn diameter Ø30.0 mm over length 127.0 mm (from Z=0.0 to Z=127.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01065", "images": ["images/Shaft_01065.png", "detail_png/Shaft_01065_length.png", "detail_png/Shaft_01065_diam.png", "detail_png/Shaft_01065_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.9 mm and length at least 131.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.9 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.0 mm over length 56.1 mm (from Z=0.0 to Z=99.9).\n9. Finish turn diameter Ø42.3 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00415", "images": ["images/Shaft_00415.png", "detail_png/Shaft_00415_length.png", "detail_png/Shaft_00415_diam.png", "detail_png/Shaft_00415_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.0 mm and length at least 206.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.0 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.1 mm over length 36.3 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø30.0 mm over length 110.2 mm (from Z=0.0 to Z=110.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03634", "images": ["images/Shaft_03634.png", "detail_png/Shaft_03634_length.png", "detail_png/Shaft_03634_diam.png", "detail_png/Shaft_03634_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.9 mm and length at least 196.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.3 mm over length 40.3 mm (from Z=0.0 to Z=148.7).\n10. Finish turn diameter Ø43.3 mm over length 19.5 mm (from Z=0.0 to Z=108.4).\n11. Finish turn diameter Ø38.4 mm over length 27.9 mm (from Z=0.0 to Z=88.9).\n12. Finish turn diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04428", "images": ["images/Shaft_04428.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.5 mm and length at least 243.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.5 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 33.3 mm (from Z=0.0 to Z=184.6).\n10. Finish turn diameter Ø36.5 mm over length 33.7 mm (from Z=0.0 to Z=151.3).\n11. Finish turn diameter Ø30.0 mm over length 117.6 mm (from Z=0.0 to Z=117.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02774", "images": ["images/Shaft_02774.png", "detail_png/Shaft_02774_length.png", "detail_png/Shaft_02774_diam.png", "detail_png/Shaft_02774_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 259.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 191.4 mm (from Z=0.0 to Z=191.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02550", "images": ["images/Shaft_02550.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.6 mm and length at least 153.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00583", "images": ["images/Shaft_00583.png", "detail_png/Shaft_00583_length.png", "detail_png/Shaft_00583_diam.png", "detail_png/Shaft_00583_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.4 mm and length at least 74.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 5.9 mm (from Z=0.0 to Z=5.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 6.4 mm (from Z=0.0 to Z=63.2).\n9. Finish turn diameter Ø44.0 mm over length 5.7 mm (from Z=0.0 to Z=56.8).\n10. Finish turn diameter Ø40.1 mm over length 18.5 mm (from Z=0.0 to Z=51.1).\n11. Finish turn diameter Ø30.6 mm over length 20.1 mm (from Z=0.0 to Z=32.6).\n12. Finish turn diameter Ø30.0 mm over length 12.5 mm (from Z=0.0 to Z=12.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01403", "images": ["images/Shaft_01403.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.0 mm and length at least 92.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.7 mm over length 31.7 mm (from Z=0.0 to Z=63.3).\n9. Finish turn diameter Ø30.0 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02005", "images": ["images/Shaft_02005.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.9 mm and length at least 203.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 184.5 mm (from Z=0.0 to Z=184.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04702", "images": ["images/Shaft_04702.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.6 mm and length at least 138.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.1 mm over length 38.7 mm (from Z=0.0 to Z=88.4).\n9. Finish turn diameter Ø30.0 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02320", "images": ["images/Shaft_02320.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.3 mm and length at least 218.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 109.2 mm (from Z=0.0 to Z=109.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 77.4 mm (from Z=0.0 to Z=104.3).\n10. Finish turn diameter Ø30.0 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01159", "images": ["images/Shaft_01159.png", "detail_png/Shaft_01159_length.png", "detail_png/Shaft_01159_diam.png", "detail_png/Shaft_01159_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.3 mm and length at least 75.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.6 mm over length 5.2 mm (from Z=0.0 to Z=55.7).\n9. Finish turn diameter Ø32.9 mm over length 13.6 mm (from Z=0.0 to Z=50.5).\n10. Finish turn diameter Ø30.0 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02220", "images": ["images/Shaft_02220.png", "detail_png/Shaft_02220_length.png", "detail_png/Shaft_02220_diam.png", "detail_png/Shaft_02220_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 130.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 114.0 mm (from Z=0.0 to Z=114.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.9 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02609", "images": ["images/Shaft_02609.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.9 mm and length at least 140.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.8 mm over length 41.9 mm (from Z=0.0 to Z=115.2).\n9. Finish turn diameter Ø46.7 mm over length 20.1 mm (from Z=0.0 to Z=73.3).\n10. Finish turn diameter Ø36.7 mm over length 13.6 mm (from Z=0.0 to Z=53.2).\n11. Finish turn diameter Ø30.0 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04500", "images": ["images/Shaft_04500.png", "detail_png/Shaft_04500_length.png", "detail_png/Shaft_04500_diam.png", "detail_png/Shaft_04500_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.8 mm and length at least 318.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 80.0 mm (from Z=0.0 to Z=255.1).\n10. Finish turn diameter Ø30.0 mm over length 175.1 mm (from Z=0.0 to Z=175.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02869", "images": ["images/Shaft_02869.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.8 mm and length at least 221.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 151.4 mm (from Z=0.0 to Z=151.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04444", "images": ["images/Shaft_04444.png", "detail_png/Shaft_04444_length.png", "detail_png/Shaft_04444_diam.png", "detail_png/Shaft_04444_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.3 mm and length at least 193.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.2 mm over length 40.3 mm (from Z=0.0 to Z=129.9).\n9. Finish turn diameter Ø30.0 mm over length 89.6 mm (from Z=0.0 to Z=89.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01692", "images": ["images/Shaft_01692.png", "detail_png/Shaft_01692_length.png", "detail_png/Shaft_01692_diam.png", "detail_png/Shaft_01692_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.1 mm and length at least 86.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.7 mm over length 19.1 mm (from Z=0.0 to Z=50.9).\n9. Finish turn diameter Ø30.0 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00838", "images": ["images/Shaft_00838.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 108.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.8 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04211", "images": ["images/Shaft_04211.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.1 mm and length at least 279.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 74.6 mm (from Z=0.0 to Z=74.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 199.6 mm (from Z=0.0 to Z=199.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04584", "images": ["images/Shaft_04584.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.3 mm and length at least 220.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.3 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.8 mm over length 24.3 mm (from Z=0.0 to Z=150.2).\n10. Finish turn diameter Ø32.3 mm over length 49.5 mm (from Z=0.0 to Z=125.9).\n11. Finish turn diameter Ø30.0 mm over length 76.4 mm (from Z=0.0 to Z=76.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00124", "images": ["images/Shaft_00124.png", "detail_png/Shaft_00124_length.png", "detail_png/Shaft_00124_diam.png", "detail_png/Shaft_00124_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 192.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 134.6 mm (from Z=0.0 to Z=134.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.6 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00937", "images": ["images/Shaft_00937.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.3 mm and length at least 277.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.2 mm over length 75.0 mm (from Z=0.0 to Z=248.0).\n10. Finish turn diameter Ø30.0 mm over length 173.0 mm (from Z=0.0 to Z=173.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02241", "images": ["images/Shaft_02241.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.0 mm and length at least 101.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 77.5 mm (from Z=0.0 to Z=77.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01290", "images": ["images/Shaft_01290.png", "detail_png/Shaft_01290_length.png", "detail_png/Shaft_01290_diam.png", "detail_png/Shaft_01290_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.2 mm and length at least 299.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.5 mm over length 89.6 mm (from Z=0.0 to Z=248.0).\n10. Finish turn diameter Ø37.2 mm over length 43.2 mm (from Z=0.0 to Z=158.4).\n11. Finish turn diameter Ø30.0 mm over length 115.2 mm (from Z=0.0 to Z=115.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04930", "images": ["images/Shaft_04930.png", "detail_png/Shaft_04930_length.png", "detail_png/Shaft_04930_diam.png", "detail_png/Shaft_04930_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.6 mm and length at least 68.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 8.5 mm (from Z=0.0 to Z=8.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.9 mm over length 5.0 mm (from Z=0.0 to Z=55.2).\n9. Finish turn diameter Ø40.1 mm over length 23.3 mm (from Z=0.0 to Z=50.2).\n10. Finish turn diameter Ø30.0 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02233", "images": ["images/Shaft_02233.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.2 mm and length at least 237.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 160.8 mm (from Z=0.0 to Z=160.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00963", "images": ["images/Shaft_00963.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.9 mm and length at least 271.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 25.1 mm (from Z=0.0 to Z=192.2).\n10. Finish turn diameter Ø48.4 mm over length 72.2 mm (from Z=0.0 to Z=167.1).\n11. Finish turn diameter Ø38.5 mm over length 34.2 mm (from Z=0.0 to Z=94.9).\n12. Finish turn diameter Ø30.0 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03613", "images": ["images/Shaft_03613.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 309.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 260.9 mm (from Z=0.0 to Z=260.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.2 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02614", "images": ["images/Shaft_02614.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.3 mm and length at least 95.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 8.2 mm (from Z=0.0 to Z=8.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.7 mm over length 20.1 mm (from Z=0.0 to Z=81.8).\n9. Finish turn diameter Ø36.6 mm over length 19.6 mm (from Z=0.0 to Z=61.7).\n10. Finish turn diameter Ø32.0 mm over length 22.4 mm (from Z=0.0 to Z=42.1).\n11. Finish turn diameter Ø30.0 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04360", "images": ["images/Shaft_04360.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.4 mm and length at least 91.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02266", "images": ["images/Shaft_02266.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.2 mm and length at least 89.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.0 mm over length 13.4 mm (from Z=0.0 to Z=69.1).\n9. Finish turn diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02347", "images": ["images/Shaft_02347.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.5 mm and length at least 136.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 116.8 mm (from Z=0.0 to Z=116.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01577", "images": ["images/Shaft_01577.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 131.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.1 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01642", "images": ["images/Shaft_01642.png", "detail_png/Shaft_01642_length.png", "detail_png/Shaft_01642_diam.png", "detail_png/Shaft_01642_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.2 mm and length at least 102.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 51.5 mm (from Z=0.0 to Z=65.3).\n9. Finish turn diameter Ø38.1 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02628", "images": ["images/Shaft_02628.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.4 mm and length at least 214.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 73.8 mm (from Z=0.0 to Z=73.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.3 mm over length 114.0 mm (from Z=0.0 to Z=135.8).\n10. Finish turn diameter Ø30.0 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01719", "images": ["images/Shaft_01719.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.7 mm and length at least 169.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 25.8 mm (from Z=0.0 to Z=150.7).\n9. Finish turn diameter Ø30.9 mm over length 57.1 mm (from Z=0.0 to Z=124.9).\n10. Finish turn diameter Ø30.0 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02557", "images": ["images/Shaft_02557.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.8 mm and length at least 239.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 147.6 mm (from Z=0.0 to Z=147.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.3 mm over length 17.7 mm (from Z=0.0 to Z=87.0).\n10. Finish turn diameter Ø33.8 mm over length 69.3 mm (from Z=0.0 to Z=69.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04731", "images": ["images/Shaft_04731.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 174.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 134.3 mm (from Z=0.0 to Z=134.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.1 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00184", "images": ["images/Shaft_00184.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.1 mm and length at least 95.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.1 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 16.5 mm (from Z=0.0 to Z=57.6).\n9. Finish turn diameter Ø37.7 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02559", "images": ["images/Shaft_02559.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.5 mm and length at least 107.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.5 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.6 mm over length 33.4 mm (from Z=0.0 to Z=79.9).\n9. Finish turn diameter Ø49.1 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04264", "images": ["images/Shaft_04264.png", "detail_png/Shaft_04264_length.png", "detail_png/Shaft_04264_diam.png", "detail_png/Shaft_04264_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 88.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.5 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00844", "images": ["images/Shaft_00844.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.8 mm and length at least 128.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 22.3 mm (from Z=0.0 to Z=22.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.7 mm (from Z=0.0 to Z=100.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00377", "images": ["images/Shaft_00377.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.1 mm and length at least 227.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 137.8 mm (from Z=0.0 to Z=137.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03824", "images": ["images/Shaft_03824.png", "detail_png/Shaft_03824_length.png", "detail_png/Shaft_03824_diam.png", "detail_png/Shaft_03824_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 112.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 93.2 mm (from Z=0.0 to Z=93.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04963", "images": ["images/Shaft_04963.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.3 mm and length at least 124.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.1 mm over length 27.7 mm (from Z=0.0 to Z=105.3).\n9. Finish turn diameter Ø44.1 mm over length 13.7 mm (from Z=0.0 to Z=77.6).\n10. Finish turn diameter Ø30.0 mm over length 63.9 mm (from Z=0.0 to Z=63.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00713", "images": ["images/Shaft_00713.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.0 mm and length at least 103.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.0 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 25.2 mm (from Z=0.0 to Z=78.2).\n9. Finish turn diameter Ø30.4 mm over length 12.0 mm (from Z=0.0 to Z=53.0).\n10. Finish turn diameter Ø30.0 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04868", "images": ["images/Shaft_04868.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.9 mm and length at least 175.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.3 mm over length 18.8 mm (from Z=0.0 to Z=140.8).\n10. Finish turn diameter Ø37.2 mm over length 122.0 mm (from Z=0.0 to Z=122.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00360", "images": ["images/Shaft_00360.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.0 mm and length at least 251.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 218.4 mm (from Z=0.0 to Z=218.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02547", "images": ["images/Shaft_02547.png", "detail_png/Shaft_02547_length.png", "detail_png/Shaft_02547_diam.png", "detail_png/Shaft_02547_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.7 mm and length at least 301.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 239.8 mm (from Z=0.0 to Z=239.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00033", "images": ["images/Shaft_00033.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.0 mm and length at least 124.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.9 mm over length 38.3 mm (from Z=0.0 to Z=91.8).\n9. Finish turn diameter Ø36.0 mm over length 53.5 mm (from Z=0.0 to Z=53.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00948", "images": ["images/Shaft_00948.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.2 mm and length at least 98.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 80.8 mm (from Z=0.0 to Z=80.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04279", "images": ["images/Shaft_04279.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.4 mm and length at least 190.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 67.4 mm (from Z=0.0 to Z=67.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 56.5 mm (from Z=0.0 to Z=117.9).\n9. Finish turn diameter Ø30.0 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03175", "images": ["images/Shaft_03175.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.2 mm and length at least 83.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03763", "images": ["images/Shaft_03763.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.9 mm and length at least 171.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.0 mm over length 31.8 mm (from Z=0.0 to Z=144.2).\n10. Finish turn diameter Ø30.0 mm over length 112.4 mm (from Z=0.0 to Z=112.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00299", "images": ["images/Shaft_00299.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.6 mm and length at least 115.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.0 mm over length 6.2 mm (from Z=0.0 to Z=72.1).\n9. Finish turn diameter Ø45.5 mm over length 12.1 mm (from Z=0.0 to Z=65.9).\n10. Finish turn diameter Ø37.2 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01680", "images": ["images/Shaft_01680.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.8 mm and length at least 312.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 40.1 mm (from Z=0.0 to Z=272.7).\n10. Finish turn diameter Ø30.0 mm over length 232.6 mm (from Z=0.0 to Z=232.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01087", "images": ["images/Shaft_01087.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 269.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.3 mm (from Z=0.0 to Z=141.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.4 mm over length 122.8 mm (from Z=0.0 to Z=122.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04228", "images": ["images/Shaft_04228.png", "detail_png/Shaft_04228_length.png", "detail_png/Shaft_04228_diam.png", "detail_png/Shaft_04228_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.2 mm and length at least 311.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 40.2 mm (from Z=0.0 to Z=40.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 102.9 mm (from Z=0.0 to Z=266.7).\n10. Finish turn diameter Ø38.4 mm over length 103.9 mm (from Z=0.0 to Z=163.8).\n11. Finish turn diameter Ø30.0 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00804", "images": ["images/Shaft_00804.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.6 mm and length at least 216.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 143.3 mm (from Z=0.0 to Z=143.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01173", "images": ["images/Shaft_01173.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.0 mm and length at least 231.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 14.8 mm (from Z=0.0 to Z=191.4).\n10. Finish turn diameter Ø47.4 mm over length 93.2 mm (from Z=0.0 to Z=176.6).\n11. Finish turn diameter Ø41.4 mm over length 58.5 mm (from Z=0.0 to Z=83.4).\n12. Finish turn diameter Ø30.0 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02681", "images": ["images/Shaft_02681.png", "detail_png/Shaft_02681_length.png", "detail_png/Shaft_02681_diam.png", "detail_png/Shaft_02681_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.6 mm and length at least 136.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.9 mm over length 36.4 mm (from Z=0.0 to Z=104.7).\n9. Finish turn diameter Ø50.8 mm over length 38.3 mm (from Z=0.0 to Z=68.3).\n10. Finish turn diameter Ø38.9 mm over length 19.1 mm (from Z=0.0 to Z=30.0).\n11. Finish turn diameter Ø30.0 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02542", "images": ["images/Shaft_02542.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.5 mm and length at least 199.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.6 mm over length 16.4 mm (from Z=0.0 to Z=183.5).\n10. Finish turn diameter Ø44.8 mm over length 72.0 mm (from Z=0.0 to Z=167.1).\n11. Finish turn diameter Ø37.9 mm over length 29.6 mm (from Z=0.0 to Z=95.1).\n12. Finish turn diameter Ø34.0 mm over length 65.5 mm (from Z=0.0 to Z=65.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04289", "images": ["images/Shaft_04289.png", "detail_png/Shaft_04289_length.png", "detail_png/Shaft_04289_diam.png", "detail_png/Shaft_04289_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.5 mm and length at least 98.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.3 mm (from Z=0.0 to Z=88.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03960", "images": ["images/Shaft_03960.png", "detail_png/Shaft_03960_length.png", "detail_png/Shaft_03960_diam.png", "detail_png/Shaft_03960_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.3 mm and length at least 147.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.9 mm (from Z=0.0 to Z=125.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02786", "images": ["images/Shaft_02786.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 217.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 186.6 mm (from Z=0.0 to Z=186.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.1 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01558", "images": ["images/Shaft_01558.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.2 mm and length at least 135.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.2 mm over length 41.3 mm (from Z=0.0 to Z=88.5).\n9. Finish turn diameter Ø39.6 mm over length 32.1 mm (from Z=0.0 to Z=47.2).\n10. Finish turn diameter Ø32.8 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01262", "images": ["images/Shaft_01262.png", "detail_png/Shaft_01262_length.png", "detail_png/Shaft_01262_diam.png", "detail_png/Shaft_01262_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.3 mm and length at least 278.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.3 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.7 mm over length 75.7 mm (from Z=0.0 to Z=207.1).\n10. Finish turn diameter Ø30.4 mm over length 53.5 mm (from Z=0.0 to Z=131.4).\n11. Finish turn diameter Ø30.0 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04096", "images": ["images/Shaft_04096.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.5 mm and length at least 146.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.8 mm (from Z=0.0 to Z=95.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03953", "images": ["images/Shaft_03953.png", "detail_png/Shaft_03953_length.png", "detail_png/Shaft_03953_diam.png", "detail_png/Shaft_03953_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.8 mm and length at least 170.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.7 mm (from Z=0.0 to Z=102.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00204", "images": ["images/Shaft_00204.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.1 mm and length at least 149.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.3 mm over length 27.4 mm (from Z=0.0 to Z=118.1).\n9. Finish turn diameter Ø44.2 mm over length 27.3 mm (from Z=0.0 to Z=90.7).\n10. Finish turn diameter Ø36.4 mm over length 34.6 mm (from Z=0.0 to Z=63.4).\n11. Finish turn diameter Ø30.0 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04145", "images": ["images/Shaft_04145.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.1 mm and length at least 279.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 122.3 mm (from Z=0.0 to Z=122.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.7 mm over length 114.0 mm (from Z=0.0 to Z=152.0).\n10. Finish turn diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03635", "images": ["images/Shaft_03635.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.9 mm and length at least 117.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.0 mm over length 34.7 mm (from Z=0.0 to Z=75.6).\n9. Finish turn diameter Ø48.9 mm over length 6.4 mm (from Z=0.0 to Z=40.9).\n10. Finish turn diameter Ø38.9 mm over length 29.2 mm (from Z=0.0 to Z=34.5).\n11. Finish turn diameter Ø30.0 mm over length 5.3 mm (from Z=0.0 to Z=5.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00758", "images": ["images/Shaft_00758.png", "detail_png/Shaft_00758_length.png", "detail_png/Shaft_00758_diam.png", "detail_png/Shaft_00758_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.5 mm and length at least 235.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.4 mm over length 62.9 mm (from Z=0.0 to Z=203.2).\n10. Finish turn diameter Ø49.0 mm over length 18.7 mm (from Z=0.0 to Z=140.3).\n11. Finish turn diameter Ø40.5 mm over length 44.5 mm (from Z=0.0 to Z=121.6).\n12. Finish turn diameter Ø30.0 mm over length 77.1 mm (from Z=0.0 to Z=77.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01655", "images": ["images/Shaft_01655.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.3 mm and length at least 277.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.3 mm over length 80.9 mm (from Z=0.0 to Z=80.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.7 mm (from Z=0.0 to Z=191.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00306", "images": ["images/Shaft_00306.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.6 mm and length at least 319.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 112.2 mm (from Z=0.0 to Z=112.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 202.5 mm (from Z=0.0 to Z=202.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03065", "images": ["images/Shaft_03065.png", "detail_png/Shaft_03065_length.png", "detail_png/Shaft_03065_diam.png", "detail_png/Shaft_03065_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.9 mm and length at least 166.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 72.2 mm (from Z=0.0 to Z=72.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.9 mm over length 53.3 mm (from Z=0.0 to Z=88.8).\n9. Finish turn diameter Ø30.9 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00919", "images": ["images/Shaft_00919.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 196.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 116.6 mm (from Z=0.0 to Z=116.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01433", "images": ["images/Shaft_01433.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 176.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 157.6 mm (from Z=0.0 to Z=157.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.1 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02476", "images": ["images/Shaft_02476.png", "detail_png/Shaft_02476_length.png", "detail_png/Shaft_02476_diam.png", "detail_png/Shaft_02476_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.6 mm and length at least 145.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.6 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.9 mm over length 36.7 mm (from Z=0.0 to Z=93.8).\n9. Finish turn diameter Ø41.4 mm over length 44.0 mm (from Z=0.0 to Z=57.1).\n10. Finish turn diameter Ø30.0 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04301", "images": ["images/Shaft_04301.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.1 mm and length at least 90.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 17.6 mm (from Z=0.0 to Z=47.2).\n9. Finish turn diameter Ø47.6 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01770", "images": ["images/Shaft_01770.png", "detail_png/Shaft_01770_length.png", "detail_png/Shaft_01770_diam.png", "detail_png/Shaft_01770_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.2 mm and length at least 78.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 20.7 mm (from Z=0.0 to Z=59.7).\n9. Finish turn diameter Ø40.3 mm over length 5.1 mm (from Z=0.0 to Z=39.0).\n10. Finish turn diameter Ø30.0 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02479", "images": ["images/Shaft_02479.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 161.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 148.0 mm (from Z=0.0 to Z=148.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.4 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03702", "images": ["images/Shaft_03702.png", "detail_png/Shaft_03702_length.png", "detail_png/Shaft_03702_diam.png", "detail_png/Shaft_03702_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.8 mm and length at least 320.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.1 mm over length 74.2 mm (from Z=0.0 to Z=212.3).\n10. Finish turn diameter Ø30.0 mm over length 138.1 mm (from Z=0.0 to Z=138.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03044", "images": ["images/Shaft_03044.png", "detail_png/Shaft_03044_length.png", "detail_png/Shaft_03044_diam.png", "detail_png/Shaft_03044_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 191.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 131.2 mm (from Z=0.0 to Z=131.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01946", "images": ["images/Shaft_01946.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.3 mm and length at least 69.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 25.0 mm (from Z=0.0 to Z=25.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.2 mm over length 19.0 mm (from Z=0.0 to Z=39.8).\n9. Finish turn diameter Ø32.1 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04071", "images": ["images/Shaft_04071.png", "detail_png/Shaft_04071_length.png", "detail_png/Shaft_04071_diam.png", "detail_png/Shaft_04071_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.2 mm and length at least 183.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.7 mm over length 36.6 mm (from Z=0.0 to Z=123.7).\n9. Finish turn diameter Ø30.0 mm over length 87.1 mm (from Z=0.0 to Z=87.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00711", "images": ["images/Shaft_00711.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.0 mm and length at least 94.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03390", "images": ["images/Shaft_03390.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.9 mm and length at least 274.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 144.7 mm (from Z=0.0 to Z=144.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02224", "images": ["images/Shaft_02224.png", "detail_png/Shaft_02224_length.png", "detail_png/Shaft_02224_diam.png", "detail_png/Shaft_02224_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.7 mm and length at least 203.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.5 mm over length 32.7 mm (from Z=0.0 to Z=171.2).\n10. Finish turn diameter Ø60.0 mm over length 138.5 mm (from Z=0.0 to Z=138.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00259", "images": ["images/Shaft_00259.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.6 mm and length at least 223.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.0 mm over length 48.0 mm (from Z=0.0 to Z=189.6).\n10. Finish turn diameter Ø66.9 mm over length 38.0 mm (from Z=0.0 to Z=141.6).\n11. Finish turn diameter Ø49.8 mm over length 29.6 mm (from Z=0.0 to Z=103.6).\n12. Finish turn diameter Ø43.1 mm over length 50.4 mm (from Z=0.0 to Z=74.0).\n13. Finish turn diameter Ø30.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02576", "images": ["images/Shaft_02576.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.6 mm and length at least 174.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.2 mm over length 33.7 mm (from Z=0.0 to Z=106.2).\n9. Finish turn diameter Ø42.6 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02525", "images": ["images/Shaft_02525.png", "detail_png/Shaft_02525_length.png", "detail_png/Shaft_02525_diam.png", "detail_png/Shaft_02525_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.4 mm and length at least 181.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.4 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 45.7 mm (from Z=0.0 to Z=155.0).\n9. Finish turn diameter Ø48.9 mm over length 30.7 mm (from Z=0.0 to Z=109.3).\n10. Finish turn diameter Ø33.8 mm over length 49.4 mm (from Z=0.0 to Z=78.6).\n11. Finish turn diameter Ø30.0 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00957", "images": ["images/Shaft_00957.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 293.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 228.0 mm (from Z=0.0 to Z=228.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04875", "images": ["images/Shaft_04875.png", "detail_png/Shaft_04875_length.png", "detail_png/Shaft_04875_diam.png", "detail_png/Shaft_04875_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.6 mm and length at least 179.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 150.5 mm (from Z=0.0 to Z=150.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01535", "images": ["images/Shaft_01535.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.8 mm and length at least 220.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.6 mm (from Z=0.0 to Z=148.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03191", "images": ["images/Shaft_03191.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.0 mm and length at least 302.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø74.4 mm over length 95.2 mm (from Z=0.0 to Z=273.7).\n10. Finish turn diameter Ø59.4 mm over length 178.5 mm (from Z=0.0 to Z=178.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04677", "images": ["images/Shaft_04677.png", "detail_png/Shaft_04677_length.png", "detail_png/Shaft_04677_diam.png", "detail_png/Shaft_04677_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.1 mm and length at least 246.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 81.5 mm (from Z=0.0 to Z=167.3).\n10. Finish turn diameter Ø45.1 mm over length 85.8 mm (from Z=0.0 to Z=85.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01359", "images": ["images/Shaft_01359.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.6 mm and length at least 160.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 29.2 mm (from Z=0.0 to Z=90.6).\n9. Finish turn diameter Ø33.1 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04376", "images": ["images/Shaft_04376.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.1 mm and length at least 253.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.8 mm over length 20.0 mm (from Z=0.0 to Z=190.6).\n10. Finish turn diameter Ø46.6 mm over length 31.9 mm (from Z=0.0 to Z=170.6).\n11. Finish turn diameter Ø42.4 mm over length 78.0 mm (from Z=0.0 to Z=138.7).\n12. Finish turn diameter Ø31.1 mm over length 19.9 mm (from Z=0.0 to Z=60.7).\n13. Finish turn diameter Ø30.0 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03073", "images": ["images/Shaft_03073.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.8 mm and length at least 223.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.8 mm over length 65.5 mm (from Z=0.0 to Z=198.0).\n10. Finish turn diameter Ø55.7 mm over length 104.6 mm (from Z=0.0 to Z=132.5).\n11. Finish turn diameter Ø46.7 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02778", "images": ["images/Shaft_02778.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.2 mm and length at least 321.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.9 mm over length 89.2 mm (from Z=0.0 to Z=280.4).\n10. Finish turn diameter Ø36.7 mm over length 74.8 mm (from Z=0.0 to Z=191.2).\n11. Finish turn diameter Ø30.0 mm over length 116.4 mm (from Z=0.0 to Z=116.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00255", "images": ["images/Shaft_00255.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.5 mm and length at least 301.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 21.9 mm (from Z=0.0 to Z=21.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 274.5 mm (from Z=0.0 to Z=274.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02297", "images": ["images/Shaft_02297.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.3 mm and length at least 69.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.9 mm over length 14.8 mm (from Z=0.0 to Z=49.5).\n9. Finish turn diameter Ø34.8 mm over length 14.4 mm (from Z=0.0 to Z=34.7).\n10. Finish turn diameter Ø30.0 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01223", "images": ["images/Shaft_01223.png", "detail_png/Shaft_01223_length.png", "detail_png/Shaft_01223_diam.png", "detail_png/Shaft_01223_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.9 mm and length at least 286.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.9 mm over length 51.2 mm (from Z=0.0 to Z=51.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.9 mm over length 54.3 mm (from Z=0.0 to Z=230.4).\n10. Finish turn diameter Ø40.2 mm over length 65.1 mm (from Z=0.0 to Z=176.1).\n11. Finish turn diameter Ø30.0 mm over length 111.0 mm (from Z=0.0 to Z=111.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00542", "images": ["images/Shaft_00542.png", "detail_png/Shaft_00542_length.png", "detail_png/Shaft_00542_diam.png", "detail_png/Shaft_00542_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.3 mm and length at least 131.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 97.2 mm (from Z=0.0 to Z=97.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02896", "images": ["images/Shaft_02896.png", "detail_png/Shaft_02896_length.png", "detail_png/Shaft_02896_diam.png", "detail_png/Shaft_02896_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.0 mm and length at least 315.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 81.7 mm (from Z=0.0 to Z=81.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.7 mm over length 117.6 mm (from Z=0.0 to Z=229.2).\n10. Finish turn diameter Ø30.0 mm over length 111.6 mm (from Z=0.0 to Z=111.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02717", "images": ["images/Shaft_02717.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.8 mm and length at least 160.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.6 mm over length 20.2 mm (from Z=0.0 to Z=86.9).\n9. Finish turn diameter Ø30.0 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04730", "images": ["images/Shaft_04730.png", "detail_png/Shaft_04730_length.png", "detail_png/Shaft_04730_diam.png", "detail_png/Shaft_04730_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.2 mm and length at least 223.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 36.1 mm (from Z=0.0 to Z=175.8).\n10. Finish turn diameter Ø30.0 mm over length 139.7 mm (from Z=0.0 to Z=139.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01706", "images": ["images/Shaft_01706.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.1 mm and length at least 246.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 48.9 mm (from Z=0.0 to Z=48.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.0 mm over length 51.3 mm (from Z=0.0 to Z=193.0).\n10. Finish turn diameter Ø44.0 mm over length 32.0 mm (from Z=0.0 to Z=141.7).\n11. Finish turn diameter Ø33.9 mm over length 57.7 mm (from Z=0.0 to Z=109.7).\n12. Finish turn diameter Ø30.0 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00153", "images": ["images/Shaft_00153.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.5 mm and length at least 191.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 59.7 mm (from Z=0.0 to Z=59.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 41.1 mm (from Z=0.0 to Z=127.0).\n9. Finish turn diameter Ø32.3 mm over length 8.5 mm (from Z=0.0 to Z=85.9).\n10. Finish turn diameter Ø30.0 mm over length 77.4 mm (from Z=0.0 to Z=77.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04389", "images": ["images/Shaft_04389.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.6 mm and length at least 71.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 9.8 mm (from Z=0.0 to Z=9.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.6 mm over length 13.9 mm (from Z=0.0 to Z=56.9).\n9. Finish turn diameter Ø53.9 mm over length 19.6 mm (from Z=0.0 to Z=43.0).\n10. Finish turn diameter Ø41.2 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04548", "images": ["images/Shaft_04548.png", "detail_png/Shaft_04548_length.png", "detail_png/Shaft_04548_diam.png", "detail_png/Shaft_04548_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.2 mm and length at least 264.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 216.9 mm (from Z=0.0 to Z=216.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02584", "images": ["images/Shaft_02584.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.5 mm and length at least 236.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 121.1 mm (from Z=0.0 to Z=121.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.3 mm over length 28.2 mm (from Z=0.0 to Z=109.9).\n10. Finish turn diameter Ø52.7 mm over length 81.7 mm (from Z=0.0 to Z=81.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04628", "images": ["images/Shaft_04628.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.3 mm and length at least 218.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 91.6 mm (from Z=0.0 to Z=91.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.8 mm over length 27.4 mm (from Z=0.0 to Z=121.5).\n10. Finish turn diameter Ø48.0 mm over length 94.1 mm (from Z=0.0 to Z=94.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02452", "images": ["images/Shaft_02452.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.2 mm and length at least 101.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 7.1 mm (from Z=0.0 to Z=7.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.7 mm over length 8.8 mm (from Z=0.0 to Z=89.1).\n9. Finish turn diameter Ø30.0 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04268", "images": ["images/Shaft_04268.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.9 mm and length at least 186.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.0 mm over length 48.1 mm (from Z=0.0 to Z=152.2).\n10. Finish turn diameter Ø30.0 mm over length 104.1 mm (from Z=0.0 to Z=104.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00458", "images": ["images/Shaft_00458.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.6 mm and length at least 157.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.8 mm over length 51.0 mm (from Z=0.0 to Z=105.7).\n9. Finish turn diameter Ø32.2 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04981", "images": ["images/Shaft_04981.png", "detail_png/Shaft_04981_length.png", "detail_png/Shaft_04981_diam.png", "detail_png/Shaft_04981_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 218.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.9 mm (from Z=0.0 to Z=168.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.7 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03788", "images": ["images/Shaft_03788.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.1 mm and length at least 160.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 37.2 mm (from Z=0.0 to Z=37.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 60.9 mm (from Z=0.0 to Z=118.3).\n9. Finish turn diameter Ø49.3 mm over length 31.1 mm (from Z=0.0 to Z=57.4).\n10. Finish turn diameter Ø34.1 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02745", "images": ["images/Shaft_02745.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.8 mm and length at least 120.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.0 mm over length 31.1 mm (from Z=0.0 to Z=81.3).\n9. Finish turn diameter Ø30.0 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04398", "images": ["images/Shaft_04398.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.8 mm and length at least 176.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.4 mm (from Z=0.0 to Z=132.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03773", "images": ["images/Shaft_03773.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.2 mm and length at least 160.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 35.7 mm (from Z=0.0 to Z=35.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.5 mm (from Z=0.0 to Z=119.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01272", "images": ["images/Shaft_01272.png", "detail_png/Shaft_01272_length.png", "detail_png/Shaft_01272_diam.png", "detail_png/Shaft_01272_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.3 mm and length at least 123.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.4 mm over length 11.9 mm (from Z=0.0 to Z=90.2).\n9. Finish turn diameter Ø51.1 mm over length 32.6 mm (from Z=0.0 to Z=78.3).\n10. Finish turn diameter Ø42.3 mm over length 29.0 mm (from Z=0.0 to Z=45.7).\n11. Finish turn diameter Ø31.8 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03944", "images": ["images/Shaft_03944.png", "detail_png/Shaft_03944_length.png", "detail_png/Shaft_03944_diam.png", "detail_png/Shaft_03944_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.5 mm and length at least 112.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 93.1 mm (from Z=0.0 to Z=93.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01112", "images": ["images/Shaft_01112.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 235.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 45.9 mm (from Z=0.0 to Z=161.8).\n10. Finish turn diameter Ø36.5 mm over length 54.2 mm (from Z=0.0 to Z=115.9).\n11. Finish turn diameter Ø30.0 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00291", "images": ["images/Shaft_00291.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.5 mm and length at least 271.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.7 mm over length 76.3 mm (from Z=0.0 to Z=227.9).\n10. Finish turn diameter Ø40.2 mm over length 132.8 mm (from Z=0.0 to Z=151.6).\n11. Finish turn diameter Ø37.0 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03887", "images": ["images/Shaft_03887.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.9 mm and length at least 263.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 176.3 mm (from Z=0.0 to Z=176.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03924", "images": ["images/Shaft_03924.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.2 mm and length at least 236.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 74.1 mm (from Z=0.0 to Z=74.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 157.6 mm (from Z=0.0 to Z=157.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02768", "images": ["images/Shaft_02768.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 299.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 78.0 mm (from Z=0.0 to Z=78.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.2 mm over length 49.4 mm (from Z=0.0 to Z=216.5).\n10. Finish turn diameter Ø33.4 mm over length 68.8 mm (from Z=0.0 to Z=167.1).\n11. Finish turn diameter Ø30.0 mm over length 98.3 mm (from Z=0.0 to Z=98.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02707", "images": ["images/Shaft_02707.png", "detail_png/Shaft_02707_length.png", "detail_png/Shaft_02707_diam.png", "detail_png/Shaft_02707_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.8 mm and length at least 174.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 52.3 mm (from Z=0.0 to Z=154.5).\n10. Finish turn diameter Ø30.0 mm over length 102.2 mm (from Z=0.0 to Z=102.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01589", "images": ["images/Shaft_01589.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.9 mm and length at least 245.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 71.9 mm (from Z=0.0 to Z=201.6).\n10. Finish turn diameter Ø45.7 mm over length 13.4 mm (from Z=0.0 to Z=129.7).\n11. Finish turn diameter Ø30.0 mm over length 116.3 mm (from Z=0.0 to Z=116.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01438", "images": ["images/Shaft_01438.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.0 mm and length at least 174.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.5 mm over length 29.2 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø30.0 mm over length 117.3 mm (from Z=0.0 to Z=117.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00238", "images": ["images/Shaft_00238.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.2 mm and length at least 117.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.2 mm over length 26.0 mm (from Z=0.0 to Z=88.9).\n9. Finish turn diameter Ø30.9 mm over length 21.3 mm (from Z=0.0 to Z=62.9).\n10. Finish turn diameter Ø30.0 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04660", "images": ["images/Shaft_04660.png", "detail_png/Shaft_04660_length.png", "detail_png/Shaft_04660_diam.png", "detail_png/Shaft_04660_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.0 mm and length at least 295.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.2 mm over length 102.9 mm (from Z=0.0 to Z=243.2).\n10. Finish turn diameter Ø30.0 mm over length 140.3 mm (from Z=0.0 to Z=140.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03244", "images": ["images/Shaft_03244.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.4 mm and length at least 243.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.0 mm over length 109.6 mm (from Z=0.0 to Z=225.4).\n10. Finish turn diameter Ø30.0 mm over length 115.8 mm (from Z=0.0 to Z=115.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02796", "images": ["images/Shaft_02796.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.6 mm and length at least 169.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 50.9 mm (from Z=0.0 to Z=50.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 113.1 mm (from Z=0.0 to Z=113.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02730", "images": ["images/Shaft_02730.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.5 mm and length at least 181.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 150.7 mm (from Z=0.0 to Z=150.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00932", "images": ["images/Shaft_00932.png", "detail_png/Shaft_00932_length.png", "detail_png/Shaft_00932_diam.png", "detail_png/Shaft_00932_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.4 mm and length at least 181.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.7 mm over length 42.8 mm (from Z=0.0 to Z=151.9).\n10. Finish turn diameter Ø30.0 mm over length 109.1 mm (from Z=0.0 to Z=109.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00050", "images": ["images/Shaft_00050.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.4 mm and length at least 236.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.5 mm over length 71.7 mm (from Z=0.0 to Z=193.9).\n10. Finish turn diameter Ø30.0 mm over length 122.2 mm (from Z=0.0 to Z=122.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02653", "images": ["images/Shaft_02653.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.2 mm and length at least 287.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 54.0 mm (from Z=0.0 to Z=233.6).\n10. Finish turn diameter Ø30.0 mm over length 179.6 mm (from Z=0.0 to Z=179.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04505", "images": ["images/Shaft_04505.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.4 mm and length at least 149.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.3 mm over length 56.3 mm (from Z=0.0 to Z=130.8).\n9. Finish turn diameter Ø30.0 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04150", "images": ["images/Shaft_04150.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.8 mm and length at least 74.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02459", "images": ["images/Shaft_02459.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.7 mm and length at least 85.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.1 mm over length 17.4 mm (from Z=0.0 to Z=67.3).\n9. Finish turn diameter Ø48.0 mm over length 5.0 mm (from Z=0.0 to Z=49.9).\n10. Finish turn diameter Ø44.9 mm over length 16.1 mm (from Z=0.0 to Z=44.9).\n11. Finish turn diameter Ø33.6 mm over length 16.5 mm (from Z=0.0 to Z=28.8).\n12. Finish turn diameter Ø30.0 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02521", "images": ["images/Shaft_02521.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.9 mm and length at least 85.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.5 mm over length 10.3 mm (from Z=0.0 to Z=46.5).\n9. Finish turn diameter Ø45.6 mm over length 16.3 mm (from Z=0.0 to Z=36.2).\n10. Finish turn diameter Ø32.7 mm over length 12.8 mm (from Z=0.0 to Z=19.9).\n11. Finish turn diameter Ø30.0 mm over length 7.1 mm (from Z=0.0 to Z=7.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00555", "images": ["images/Shaft_00555.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.8 mm and length at least 246.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.1 mm over length 135.1 mm (from Z=0.0 to Z=222.4).\n10. Finish turn diameter Ø30.0 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02084", "images": ["images/Shaft_02084.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.1 mm and length at least 275.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 86.9 mm (from Z=0.0 to Z=86.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 183.4 mm (from Z=0.0 to Z=183.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02307", "images": ["images/Shaft_02307.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 202.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 169.0 mm (from Z=0.0 to Z=169.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01648", "images": ["images/Shaft_01648.png", "detail_png/Shaft_01648_length.png", "detail_png/Shaft_01648_diam.png", "detail_png/Shaft_01648_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.1 mm and length at least 314.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.2 mm over length 16.1 mm (from Z=0.0 to Z=232.6).\n10. Finish turn diameter Ø35.2 mm over length 52.9 mm (from Z=0.0 to Z=216.5).\n11. Finish turn diameter Ø31.8 mm over length 53.8 mm (from Z=0.0 to Z=163.6).\n12. Finish turn diameter Ø30.0 mm over length 109.8 mm (from Z=0.0 to Z=109.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00092", "images": ["images/Shaft_00092.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.6 mm and length at least 141.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.6 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.4 mm over length 12.1 mm (from Z=0.0 to Z=95.3).\n9. Finish turn diameter Ø49.5 mm over length 5.6 mm (from Z=0.0 to Z=83.2).\n10. Finish turn diameter Ø31.2 mm over length 37.4 mm (from Z=0.0 to Z=77.6).\n11. Finish turn diameter Ø30.0 mm over length 40.2 mm (from Z=0.0 to Z=40.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01739", "images": ["images/Shaft_01739.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 208.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 186.8 mm (from Z=0.0 to Z=186.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.5 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04590", "images": ["images/Shaft_04590.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.6 mm and length at least 176.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 40.2 mm (from Z=0.0 to Z=40.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 131.7 mm (from Z=0.0 to Z=131.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02864", "images": ["images/Shaft_02864.png", "detail_png/Shaft_02864_length.png", "detail_png/Shaft_02864_diam.png", "detail_png/Shaft_02864_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 81.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.2 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02734", "images": ["images/Shaft_02734.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 76.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.8 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00372", "images": ["images/Shaft_00372.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.7 mm and length at least 305.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.7 mm over length 152.9 mm (from Z=0.0 to Z=152.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 147.3 mm (from Z=0.0 to Z=147.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03391", "images": ["images/Shaft_03391.png", "detail_png/Shaft_03391_length.png", "detail_png/Shaft_03391_diam.png", "detail_png/Shaft_03391_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.3 mm and length at least 306.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.5 mm over length 65.6 mm (from Z=0.0 to Z=287.2).\n10. Finish turn diameter Ø30.0 mm over length 221.6 mm (from Z=0.0 to Z=221.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03396", "images": ["images/Shaft_03396.png", "detail_png/Shaft_03396_length.png", "detail_png/Shaft_03396_diam.png", "detail_png/Shaft_03396_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.7 mm and length at least 89.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.8 mm over length 22.6 mm (from Z=0.0 to Z=55.4).\n9. Finish turn diameter Ø30.0 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01698", "images": ["images/Shaft_01698.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.6 mm and length at least 177.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.1 mm over length 8.1 mm (from Z=0.0 to Z=153.3).\n9. Finish turn diameter Ø55.6 mm over length 32.0 mm (from Z=0.0 to Z=145.2).\n10. Finish turn diameter Ø50.0 mm over length 48.0 mm (from Z=0.0 to Z=113.2).\n11. Finish turn diameter Ø38.1 mm over length 43.8 mm (from Z=0.0 to Z=65.2).\n12. Finish turn diameter Ø33.2 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00966", "images": ["images/Shaft_00966.png", "detail_png/Shaft_00966_length.png", "detail_png/Shaft_00966_diam.png", "detail_png/Shaft_00966_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 247.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 214.6 mm (from Z=0.0 to Z=214.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03808", "images": ["images/Shaft_03808.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.4 mm and length at least 89.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.6 mm over length 7.7 mm (from Z=0.0 to Z=41.7).\n9. Finish turn diameter Ø49.4 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00196", "images": ["images/Shaft_00196.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 240.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 180.0 mm (from Z=0.0 to Z=180.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.8 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00968", "images": ["images/Shaft_00968.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.4 mm and length at least 91.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.3 mm over length 15.8 mm (from Z=0.0 to Z=81.3).\n9. Finish turn diameter Ø30.0 mm over length 65.5 mm (from Z=0.0 to Z=65.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00012", "images": ["images/Shaft_00012.png", "detail_png/Shaft_00012_length.png", "detail_png/Shaft_00012_diam.png", "detail_png/Shaft_00012_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.1 mm and length at least 288.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.7 mm over length 68.1 mm (from Z=0.0 to Z=220.4).\n10. Finish turn diameter Ø37.3 mm over length 7.7 mm (from Z=0.0 to Z=152.3).\n11. Finish turn diameter Ø30.0 mm over length 144.6 mm (from Z=0.0 to Z=144.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01585", "images": ["images/Shaft_01585.png", "detail_png/Shaft_01585_length.png", "detail_png/Shaft_01585_diam.png", "detail_png/Shaft_01585_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.8 mm and length at least 312.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.1 mm over length 68.3 mm (from Z=0.0 to Z=264.6).\n10. Finish turn diameter Ø30.0 mm over length 196.3 mm (from Z=0.0 to Z=196.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02379", "images": ["images/Shaft_02379.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.0 mm and length at least 200.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 42.5 mm (from Z=0.0 to Z=130.0).\n10. Finish turn diameter Ø30.0 mm over length 87.5 mm (from Z=0.0 to Z=87.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01906", "images": ["images/Shaft_01906.png", "detail_png/Shaft_01906_length.png", "detail_png/Shaft_01906_diam.png", "detail_png/Shaft_01906_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.2 mm and length at least 136.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 28.2 mm (from Z=0.0 to Z=120.4).\n10. Finish turn diameter Ø30.0 mm over length 92.2 mm (from Z=0.0 to Z=92.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04992", "images": ["images/Shaft_04992.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 88.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.0 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01473", "images": ["images/Shaft_01473.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.4 mm and length at least 230.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 176.0 mm (from Z=0.0 to Z=176.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04034", "images": ["images/Shaft_04034.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.2 mm and length at least 75.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 15.4 mm (from Z=0.0 to Z=48.2).\n9. Finish turn diameter Ø30.0 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04077", "images": ["images/Shaft_04077.png", "detail_png/Shaft_04077_length.png", "detail_png/Shaft_04077_diam.png", "detail_png/Shaft_04077_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.7 mm and length at least 235.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.3 mm over length 10.9 mm (from Z=0.0 to Z=217.1).\n10. Finish turn diameter Ø52.5 mm over length 36.7 mm (from Z=0.0 to Z=206.2).\n11. Finish turn diameter Ø42.0 mm over length 67.1 mm (from Z=0.0 to Z=169.5).\n12. Finish turn diameter Ø30.0 mm over length 102.4 mm (from Z=0.0 to Z=102.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04257", "images": ["images/Shaft_04257.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.1 mm and length at least 85.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.0 mm over length 12.3 mm (from Z=0.0 to Z=60.9).\n9. Finish turn diameter Ø45.3 mm over length 19.5 mm (from Z=0.0 to Z=48.6).\n10. Finish turn diameter Ø34.9 mm over length 5.0 mm (from Z=0.0 to Z=29.1).\n11. Finish turn diameter Ø30.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04066", "images": ["images/Shaft_04066.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.6 mm and length at least 156.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø73.6 mm over length 19.5 mm (from Z=0.0 to Z=128.7).\n9. Finish turn diameter Ø64.5 mm over length 63.0 mm (from Z=0.0 to Z=109.2).\n10. Finish turn diameter Ø46.1 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04609", "images": ["images/Shaft_04609.png", "detail_png/Shaft_04609_length.png", "detail_png/Shaft_04609_diam.png", "detail_png/Shaft_04609_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.6 mm and length at least 195.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.5 mm over length 43.6 mm (from Z=0.0 to Z=124.0).\n10. Finish turn diameter Ø34.8 mm over length 80.4 mm (from Z=0.0 to Z=80.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01062", "images": ["images/Shaft_01062.png", "detail_png/Shaft_01062_length.png", "detail_png/Shaft_01062_diam.png", "detail_png/Shaft_01062_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.7 mm and length at least 147.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 17.2 mm (from Z=0.0 to Z=135.7).\n9. Finish turn diameter Ø49.1 mm over length 47.5 mm (from Z=0.0 to Z=118.5).\n10. Finish turn diameter Ø40.7 mm over length 21.5 mm (from Z=0.0 to Z=71.0).\n11. Finish turn diameter Ø30.0 mm over length 49.5 mm (from Z=0.0 to Z=49.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} diff --git a/train.jsonl b/train.jsonl new file mode 100644 index 0000000000000000000000000000000000000000..8b9503c3237c735f4e38477625fc5e081b7fc87b --- /dev/null +++ b/train.jsonl @@ -0,0 +1,4500 @@ +{"id": "Shaft_03512", "images": ["images/Shaft_03512.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.6 mm and length at least 129.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 49.4 mm (from Z=0.0 to Z=49.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 34.2 mm (from Z=0.0 to Z=74.8).\n9. Finish turn diameter Ø30.0 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03270", "images": ["images/Shaft_03270.png", "detail_png/Shaft_03270_length.png", "detail_png/Shaft_03270_diam.png", "detail_png/Shaft_03270_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.4 mm and length at least 294.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.4 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.6 mm over length 48.7 mm (from Z=0.0 to Z=238.6).\n10. Finish turn diameter Ø38.7 mm over length 114.7 mm (from Z=0.0 to Z=189.9).\n11. Finish turn diameter Ø30.0 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03606", "images": ["images/Shaft_03606.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.2 mm and length at least 282.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.2 mm over length 106.0 mm (from Z=0.0 to Z=106.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 171.7 mm (from Z=0.0 to Z=171.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01365", "images": ["images/Shaft_01365.png", "detail_png/Shaft_01365_length.png", "detail_png/Shaft_01365_diam.png", "detail_png/Shaft_01365_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.4 mm and length at least 120.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.2 mm over length 25.9 mm (from Z=0.0 to Z=69.4).\n9. Finish turn diameter Ø51.8 mm over length 43.5 mm (from Z=0.0 to Z=43.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04616", "images": ["images/Shaft_04616.png", "detail_png/Shaft_04616_length.png", "detail_png/Shaft_04616_diam.png", "detail_png/Shaft_04616_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 125.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.5 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00159", "images": ["images/Shaft_00159.png", "detail_png/Shaft_00159_length.png", "detail_png/Shaft_00159_diam.png", "detail_png/Shaft_00159_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.2 mm and length at least 211.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.2 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.7 mm over length 46.2 mm (from Z=0.0 to Z=172.4).\n10. Finish turn diameter Ø46.3 mm over length 52.5 mm (from Z=0.0 to Z=126.2).\n11. Finish turn diameter Ø40.7 mm over length 16.6 mm (from Z=0.0 to Z=73.7).\n12. Finish turn diameter Ø30.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00425", "images": ["images/Shaft_00425.png", "detail_png/Shaft_00425_length.png", "detail_png/Shaft_00425_diam.png", "detail_png/Shaft_00425_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.8 mm and length at least 205.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 49.4 mm (from Z=0.0 to Z=146.4).\n10. Finish turn diameter Ø30.0 mm over length 97.0 mm (from Z=0.0 to Z=97.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01613", "images": ["images/Shaft_01613.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.5 mm and length at least 208.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.3 mm over length 25.2 mm (from Z=0.0 to Z=173.3).\n10. Finish turn diameter Ø48.8 mm over length 69.7 mm (from Z=0.0 to Z=148.1).\n11. Finish turn diameter Ø39.8 mm over length 24.4 mm (from Z=0.0 to Z=78.4).\n12. Finish turn diameter Ø31.0 mm over length 54.0 mm (from Z=0.0 to Z=54.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04676", "images": ["images/Shaft_04676.png", "detail_png/Shaft_04676_length.png", "detail_png/Shaft_04676_diam.png", "detail_png/Shaft_04676_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.0 mm and length at least 136.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.9 mm over length 32.6 mm (from Z=0.0 to Z=101.3).\n9. Finish turn diameter Ø30.0 mm over length 68.7 mm (from Z=0.0 to Z=68.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02867", "images": ["images/Shaft_02867.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 216.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 166.5 mm (from Z=0.0 to Z=166.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03967", "images": ["images/Shaft_03967.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 252.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 159.6 mm (from Z=0.0 to Z=159.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.7 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03235", "images": ["images/Shaft_03235.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.5 mm and length at least 197.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 162.5 mm (from Z=0.0 to Z=162.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04971", "images": ["images/Shaft_04971.png", "detail_png/Shaft_04971_length.png", "detail_png/Shaft_04971_diam.png", "detail_png/Shaft_04971_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 252.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 182.6 mm (from Z=0.0 to Z=182.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01518", "images": ["images/Shaft_01518.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.4 mm and length at least 263.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.3 mm over length 124.8 mm (from Z=0.0 to Z=220.0).\n10. Finish turn diameter Ø41.3 mm over length 95.2 mm (from Z=0.0 to Z=95.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00105", "images": ["images/Shaft_00105.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 151.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 111.4 mm (from Z=0.0 to Z=111.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.6 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04122", "images": ["images/Shaft_04122.png", "detail_png/Shaft_04122_length.png", "detail_png/Shaft_04122_diam.png", "detail_png/Shaft_04122_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.1 mm and length at least 310.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 107.8 mm (from Z=0.0 to Z=107.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 197.3 mm (from Z=0.0 to Z=197.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03436", "images": ["images/Shaft_03436.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.2 mm and length at least 66.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.5 mm over length 21.2 mm (from Z=0.0 to Z=50.8).\n9. Finish turn diameter Ø36.5 mm over length 7.8 mm (from Z=0.0 to Z=29.6).\n10. Finish turn diameter Ø32.6 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03182", "images": ["images/Shaft_03182.png", "detail_png/Shaft_03182_length.png", "detail_png/Shaft_03182_diam.png", "detail_png/Shaft_03182_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.5 mm and length at least 108.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 89.4 mm (from Z=0.0 to Z=89.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00100", "images": ["images/Shaft_00100.png", "detail_png/Shaft_00100_length.png", "detail_png/Shaft_00100_diam.png", "detail_png/Shaft_00100_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.6 mm and length at least 189.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 68.2 mm (from Z=0.0 to Z=68.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 116.2 mm (from Z=0.0 to Z=116.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03909", "images": ["images/Shaft_03909.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.5 mm and length at least 307.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 142.1 mm (from Z=0.0 to Z=142.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 159.9 mm (from Z=0.0 to Z=159.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03496", "images": ["images/Shaft_03496.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.3 mm and length at least 202.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 99.7 mm (from Z=0.0 to Z=99.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.1 mm over length 44.8 mm (from Z=0.0 to Z=98.2).\n10. Finish turn diameter Ø38.9 mm over length 36.6 mm (from Z=0.0 to Z=53.4).\n11. Finish turn diameter Ø35.5 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00612", "images": ["images/Shaft_00612.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.5 mm and length at least 153.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø76.4 mm over length 41.5 mm (from Z=0.0 to Z=127.8).\n9. Finish turn diameter Ø68.8 mm over length 10.8 mm (from Z=0.0 to Z=86.3).\n10. Finish turn diameter Ø62.4 mm over length 29.5 mm (from Z=0.0 to Z=75.5).\n11. Finish turn diameter Ø52.3 mm over length 34.3 mm (from Z=0.0 to Z=46.0).\n12. Finish turn diameter Ø33.4 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00544", "images": ["images/Shaft_00544.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.4 mm and length at least 285.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.2 mm over length 92.4 mm (from Z=0.0 to Z=209.1).\n10. Finish turn diameter Ø48.1 mm over length 116.7 mm (from Z=0.0 to Z=116.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00722", "images": ["images/Shaft_00722.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.3 mm and length at least 91.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 5.0 mm (from Z=0.0 to Z=59.5).\n9. Finish turn diameter Ø41.6 mm over length 17.7 mm (from Z=0.0 to Z=54.5).\n10. Finish turn diameter Ø30.0 mm over length 36.8 mm (from Z=0.0 to Z=36.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02146", "images": ["images/Shaft_02146.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.6 mm and length at least 67.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04136", "images": ["images/Shaft_04136.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.1 mm and length at least 106.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 94.1 mm (from Z=0.0 to Z=94.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01003", "images": ["images/Shaft_01003.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.5 mm and length at least 81.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.1 mm over length 14.8 mm (from Z=0.0 to Z=57.6).\n9. Finish turn diameter Ø43.1 mm over length 19.2 mm (from Z=0.0 to Z=42.8).\n10. Finish turn diameter Ø36.0 mm over length 6.1 mm (from Z=0.0 to Z=23.6).\n11. Finish turn diameter Ø30.0 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02054", "images": ["images/Shaft_02054.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.7 mm and length at least 189.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 78.4 mm (from Z=0.0 to Z=78.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 89.0 mm (from Z=0.0 to Z=105.8).\n9. Finish turn diameter Ø30.0 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01658", "images": ["images/Shaft_01658.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.8 mm and length at least 272.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.8 mm over length 70.8 mm (from Z=0.0 to Z=70.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.2 mm over length 55.2 mm (from Z=0.0 to Z=196.2).\n10. Finish turn diameter Ø65.2 mm over length 84.6 mm (from Z=0.0 to Z=141.0).\n11. Finish turn diameter Ø46.8 mm over length 44.9 mm (from Z=0.0 to Z=56.4).\n12. Finish turn diameter Ø33.0 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04172", "images": ["images/Shaft_04172.png", "detail_png/Shaft_04172_length.png", "detail_png/Shaft_04172_diam.png", "detail_png/Shaft_04172_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.8 mm and length at least 244.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 65.6 mm (from Z=0.0 to Z=181.8).\n10. Finish turn diameter Ø51.5 mm over length 40.4 mm (from Z=0.0 to Z=116.2).\n11. Finish turn diameter Ø48.4 mm over length 31.2 mm (from Z=0.0 to Z=75.8).\n12. Finish turn diameter Ø33.5 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03451", "images": ["images/Shaft_03451.png", "detail_png/Shaft_03451_length.png", "detail_png/Shaft_03451_diam.png", "detail_png/Shaft_03451_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.7 mm and length at least 135.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 18.4 mm (from Z=0.0 to Z=116.1).\n10. Finish turn diameter Ø30.0 mm over length 97.7 mm (from Z=0.0 to Z=97.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02755", "images": ["images/Shaft_02755.png", "detail_png/Shaft_02755_length.png", "detail_png/Shaft_02755_diam.png", "detail_png/Shaft_02755_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.9 mm and length at least 128.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00277", "images": ["images/Shaft_00277.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.5 mm and length at least 79.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 27.3 mm (from Z=0.0 to Z=27.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.1 mm over length 19.2 mm (from Z=0.0 to Z=46.9).\n9. Finish turn diameter Ø61.5 mm over length 6.3 mm (from Z=0.0 to Z=27.7).\n10. Finish turn diameter Ø54.6 mm over length 5.0 mm (from Z=0.0 to Z=21.4).\n11. Finish turn diameter Ø40.5 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02568", "images": ["images/Shaft_02568.png", "detail_png/Shaft_02568_length.png", "detail_png/Shaft_02568_diam.png", "detail_png/Shaft_02568_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.0 mm and length at least 254.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 47.6 mm (from Z=0.0 to Z=209.8).\n10. Finish turn diameter Ø30.0 mm over length 162.2 mm (from Z=0.0 to Z=162.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02887", "images": ["images/Shaft_02887.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.1 mm and length at least 157.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 30.8 mm (from Z=0.0 to Z=113.7).\n9. Finish turn diameter Ø44.2 mm over length 22.6 mm (from Z=0.0 to Z=82.9).\n10. Finish turn diameter Ø30.0 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01607", "images": ["images/Shaft_01607.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.6 mm and length at least 214.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.6 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 82.8 mm (from Z=0.0 to Z=177.1).\n10. Finish turn diameter Ø45.2 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00785", "images": ["images/Shaft_00785.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.4 mm and length at least 316.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.5 mm over length 17.3 mm (from Z=0.0 to Z=263.2).\n10. Finish turn diameter Ø33.4 mm over length 41.8 mm (from Z=0.0 to Z=245.9).\n11. Finish turn diameter Ø30.0 mm over length 204.1 mm (from Z=0.0 to Z=204.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03684", "images": ["images/Shaft_03684.png", "detail_png/Shaft_03684_length.png", "detail_png/Shaft_03684_diam.png", "detail_png/Shaft_03684_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.4 mm and length at least 196.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.9 mm (from Z=0.0 to Z=169.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03892", "images": ["images/Shaft_03892.png", "detail_png/Shaft_03892_length.png", "detail_png/Shaft_03892_diam.png", "detail_png/Shaft_03892_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.9 mm and length at least 148.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 16.6 mm (from Z=0.0 to Z=110.6).\n9. Finish turn diameter Ø33.8 mm over length 32.3 mm (from Z=0.0 to Z=94.0).\n10. Finish turn diameter Ø30.0 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02710", "images": ["images/Shaft_02710.png", "detail_png/Shaft_02710_length.png", "detail_png/Shaft_02710_diam.png", "detail_png/Shaft_02710_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.2 mm and length at least 262.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 59.7 mm (from Z=0.0 to Z=59.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.5 mm over length 92.6 mm (from Z=0.0 to Z=197.3).\n10. Finish turn diameter Ø30.0 mm over length 104.7 mm (from Z=0.0 to Z=104.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03010", "images": ["images/Shaft_03010.png", "detail_png/Shaft_03010_length.png", "detail_png/Shaft_03010_diam.png", "detail_png/Shaft_03010_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.5 mm and length at least 152.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 30.5 mm (from Z=0.0 to Z=113.6).\n9. Finish turn diameter Ø31.5 mm over length 5.0 mm (from Z=0.0 to Z=83.1).\n10. Finish turn diameter Ø30.0 mm over length 78.1 mm (from Z=0.0 to Z=78.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01120", "images": ["images/Shaft_01120.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.9 mm and length at least 289.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 21.0 mm (from Z=0.0 to Z=246.2).\n10. Finish turn diameter Ø39.7 mm over length 45.9 mm (from Z=0.0 to Z=225.2).\n11. Finish turn diameter Ø30.0 mm over length 179.3 mm (from Z=0.0 to Z=179.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04383", "images": ["images/Shaft_04383.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.0 mm and length at least 215.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 53.9 mm (from Z=0.0 to Z=189.7).\n10. Finish turn diameter Ø49.0 mm over length 18.1 mm (from Z=0.0 to Z=135.8).\n11. Finish turn diameter Ø39.6 mm over length 42.7 mm (from Z=0.0 to Z=117.7).\n12. Finish turn diameter Ø30.0 mm over length 75.0 mm (from Z=0.0 to Z=75.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04945", "images": ["images/Shaft_04945.png", "detail_png/Shaft_04945_length.png", "detail_png/Shaft_04945_diam.png", "detail_png/Shaft_04945_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.3 mm and length at least 126.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø75.2 mm over length 49.0 mm (from Z=0.0 to Z=59.8).\n9. Finish turn diameter Ø69.4 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03148", "images": ["images/Shaft_03148.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.8 mm and length at least 272.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 47.2 mm (from Z=0.0 to Z=47.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.9 mm over length 22.1 mm (from Z=0.0 to Z=220.7).\n10. Finish turn diameter Ø30.0 mm over length 198.6 mm (from Z=0.0 to Z=198.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01468", "images": ["images/Shaft_01468.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 157.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 109.0 mm (from Z=0.0 to Z=109.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03828", "images": ["images/Shaft_03828.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.6 mm and length at least 165.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.1 mm over length 58.9 mm (from Z=0.0 to Z=118.9).\n9. Finish turn diameter Ø55.3 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03156", "images": ["images/Shaft_03156.png", "detail_png/Shaft_03156_length.png", "detail_png/Shaft_03156_diam.png", "detail_png/Shaft_03156_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.9 mm and length at least 285.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 113.4 mm (from Z=0.0 to Z=113.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 10.3 mm (from Z=0.0 to Z=166.6).\n10. Finish turn diameter Ø30.0 mm over length 156.3 mm (from Z=0.0 to Z=156.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01316", "images": ["images/Shaft_01316.png", "detail_png/Shaft_01316_length.png", "detail_png/Shaft_01316_diam.png", "detail_png/Shaft_01316_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.0 mm and length at least 281.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.6 mm over length 39.4 mm (from Z=0.0 to Z=243.8).\n10. Finish turn diameter Ø39.4 mm over length 53.1 mm (from Z=0.0 to Z=204.4).\n11. Finish turn diameter Ø30.0 mm over length 151.3 mm (from Z=0.0 to Z=151.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04356", "images": ["images/Shaft_04356.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.4 mm and length at least 307.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 47.1 mm (from Z=0.0 to Z=276.4).\n10. Finish turn diameter Ø38.6 mm over length 39.3 mm (from Z=0.0 to Z=229.3).\n11. Finish turn diameter Ø30.0 mm over length 190.0 mm (from Z=0.0 to Z=190.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02620", "images": ["images/Shaft_02620.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.3 mm and length at least 109.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.3 mm over length 9.3 mm (from Z=0.0 to Z=82.7).\n9. Finish turn diameter Ø54.8 mm over length 25.2 mm (from Z=0.0 to Z=73.4).\n10. Finish turn diameter Ø45.7 mm over length 28.1 mm (from Z=0.0 to Z=48.2).\n11. Finish turn diameter Ø41.0 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01830", "images": ["images/Shaft_01830.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.4 mm and length at least 237.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 51.2 mm (from Z=0.0 to Z=51.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.8 mm over length 50.0 mm (from Z=0.0 to Z=181.0).\n10. Finish turn diameter Ø30.0 mm over length 131.0 mm (from Z=0.0 to Z=131.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01561", "images": ["images/Shaft_01561.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.9 mm and length at least 309.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 27.0 mm (from Z=0.0 to Z=283.2).\n10. Finish turn diameter Ø30.0 mm over length 256.2 mm (from Z=0.0 to Z=256.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03791", "images": ["images/Shaft_03791.png", "detail_png/Shaft_03791_length.png", "detail_png/Shaft_03791_diam.png", "detail_png/Shaft_03791_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.0 mm and length at least 87.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.7 mm over length 20.9 mm (from Z=0.0 to Z=61.7).\n9. Finish turn diameter Ø34.4 mm over length 6.0 mm (from Z=0.0 to Z=40.8).\n10. Finish turn diameter Ø30.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02445", "images": ["images/Shaft_02445.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.2 mm and length at least 67.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.6 mm over length 22.8 mm (from Z=0.0 to Z=47.3).\n9. Finish turn diameter Ø30.5 mm over length 11.6 mm (from Z=0.0 to Z=24.5).\n10. Finish turn diameter Ø30.0 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02333", "images": ["images/Shaft_02333.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.4 mm and length at least 128.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.4 mm over length 34.8 mm (from Z=0.0 to Z=82.6).\n9. Finish turn diameter Ø39.3 mm over length 10.7 mm (from Z=0.0 to Z=47.8).\n10. Finish turn diameter Ø30.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01813", "images": ["images/Shaft_01813.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.8 mm and length at least 70.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.8 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04955", "images": ["images/Shaft_04955.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.1 mm and length at least 194.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.8 mm (from Z=0.0 to Z=170.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00798", "images": ["images/Shaft_00798.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.2 mm and length at least 73.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02292", "images": ["images/Shaft_02292.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.1 mm and length at least 92.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 26.8 mm (from Z=0.0 to Z=26.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.8 mm over length 20.8 mm (from Z=0.0 to Z=61.0).\n9. Finish turn diameter Ø38.4 mm over length 30.0 mm (from Z=0.0 to Z=40.2).\n10. Finish turn diameter Ø30.0 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00154", "images": ["images/Shaft_00154.png", "detail_png/Shaft_00154_length.png", "detail_png/Shaft_00154_diam.png", "detail_png/Shaft_00154_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 257.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.3 mm (from Z=0.0 to Z=167.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.9 mm over length 85.3 mm (from Z=0.0 to Z=85.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04916", "images": ["images/Shaft_04916.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.0 mm and length at least 76.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.8 mm over length 17.4 mm (from Z=0.0 to Z=50.8).\n9. Finish turn diameter Ø30.0 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00157", "images": ["images/Shaft_00157.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.6 mm and length at least 96.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.8 mm over length 22.4 mm (from Z=0.0 to Z=58.6).\n9. Finish turn diameter Ø44.3 mm over length 13.4 mm (from Z=0.0 to Z=36.2).\n10. Finish turn diameter Ø30.0 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04232", "images": ["images/Shaft_04232.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.0 mm and length at least 217.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.0 mm over length 26.7 mm (from Z=0.0 to Z=26.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 186.1 mm (from Z=0.0 to Z=186.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01450", "images": ["images/Shaft_01450.png", "detail_png/Shaft_01450_length.png", "detail_png/Shaft_01450_diam.png", "detail_png/Shaft_01450_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.5 mm and length at least 159.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 18.8 mm (from Z=0.0 to Z=133.9).\n9. Finish turn diameter Ø35.8 mm over length 61.2 mm (from Z=0.0 to Z=115.1).\n10. Finish turn diameter Ø30.0 mm over length 53.9 mm (from Z=0.0 to Z=53.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02487", "images": ["images/Shaft_02487.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 113.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.6 mm (from Z=0.0 to Z=85.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.8 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04296", "images": ["images/Shaft_04296.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.9 mm and length at least 173.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.4 mm over length 8.6 mm (from Z=0.0 to Z=125.0).\n10. Finish turn diameter Ø30.0 mm over length 116.4 mm (from Z=0.0 to Z=116.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02342", "images": ["images/Shaft_02342.png", "detail_png/Shaft_02342_length.png", "detail_png/Shaft_02342_diam.png", "detail_png/Shaft_02342_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 212.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.4 mm (from Z=0.0 to Z=147.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00339", "images": ["images/Shaft_00339.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.9 mm and length at least 187.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.6 mm (from Z=0.0 to Z=166.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04545", "images": ["images/Shaft_04545.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.8 mm and length at least 226.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.7 mm over length 41.2 mm (from Z=0.0 to Z=165.7).\n10. Finish turn diameter Ø40.4 mm over length 45.5 mm (from Z=0.0 to Z=124.5).\n11. Finish turn diameter Ø31.9 mm over length 59.0 mm (from Z=0.0 to Z=79.0).\n12. Finish turn diameter Ø30.0 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04471", "images": ["images/Shaft_04471.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.3 mm and length at least 303.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.6 mm over length 89.7 mm (from Z=0.0 to Z=283.7).\n10. Finish turn diameter Ø50.8 mm over length 91.4 mm (from Z=0.0 to Z=194.0).\n11. Finish turn diameter Ø39.4 mm over length 22.7 mm (from Z=0.0 to Z=102.6).\n12. Finish turn diameter Ø33.4 mm over length 79.9 mm (from Z=0.0 to Z=79.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01760", "images": ["images/Shaft_01760.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.8 mm and length at least 250.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 53.6 mm (from Z=0.0 to Z=226.4).\n10. Finish turn diameter Ø30.0 mm over length 172.8 mm (from Z=0.0 to Z=172.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02160", "images": ["images/Shaft_02160.png", "detail_png/Shaft_02160_length.png", "detail_png/Shaft_02160_diam.png", "detail_png/Shaft_02160_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.3 mm and length at least 218.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.1 mm over length 69.1 mm (from Z=0.0 to Z=152.1).\n10. Finish turn diameter Ø35.2 mm over length 62.1 mm (from Z=0.0 to Z=83.0).\n11. Finish turn diameter Ø31.1 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04674", "images": ["images/Shaft_04674.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.4 mm and length at least 188.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.1 mm over length 21.5 mm (from Z=0.0 to Z=135.3).\n10. Finish turn diameter Ø30.0 mm over length 113.8 mm (from Z=0.0 to Z=113.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03707", "images": ["images/Shaft_03707.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.9 mm and length at least 260.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.2 mm over length 36.6 mm (from Z=0.0 to Z=176.3).\n10. Finish turn diameter Ø49.8 mm over length 58.7 mm (from Z=0.0 to Z=139.7).\n11. Finish turn diameter Ø32.2 mm over length 10.3 mm (from Z=0.0 to Z=81.0).\n12. Finish turn diameter Ø30.0 mm over length 70.7 mm (from Z=0.0 to Z=70.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03744", "images": ["images/Shaft_03744.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.4 mm and length at least 290.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 53.1 mm (from Z=0.0 to Z=239.0).\n10. Finish turn diameter Ø30.0 mm over length 185.9 mm (from Z=0.0 to Z=185.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00326", "images": ["images/Shaft_00326.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.2 mm and length at least 228.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 94.9 mm (from Z=0.0 to Z=94.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.5 mm over length 93.8 mm (from Z=0.0 to Z=129.0).\n10. Finish turn diameter Ø56.8 mm over length 22.3 mm (from Z=0.0 to Z=35.2).\n11. Finish turn diameter Ø51.1 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04668", "images": ["images/Shaft_04668.png", "detail_png/Shaft_04668_length.png", "detail_png/Shaft_04668_diam.png", "detail_png/Shaft_04668_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.0 mm and length at least 172.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 94.6 mm (from Z=0.0 to Z=104.6).\n9. Finish turn diameter Ø40.9 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04102", "images": ["images/Shaft_04102.png", "detail_png/Shaft_04102_length.png", "detail_png/Shaft_04102_diam.png", "detail_png/Shaft_04102_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.5 mm and length at least 178.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.5 mm over length 58.3 mm (from Z=0.0 to Z=133.7).\n9. Finish turn diameter Ø37.6 mm over length 53.4 mm (from Z=0.0 to Z=75.4).\n10. Finish turn diameter Ø30.0 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02904", "images": ["images/Shaft_02904.png", "detail_png/Shaft_02904_length.png", "detail_png/Shaft_02904_diam.png", "detail_png/Shaft_02904_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 319.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.8 mm (from Z=0.0 to Z=147.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 166.5 mm (from Z=0.0 to Z=166.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01377", "images": ["images/Shaft_01377.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.7 mm and length at least 309.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.7 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 275.9 mm (from Z=0.0 to Z=275.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02884", "images": ["images/Shaft_02884.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.6 mm and length at least 162.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 130.8 mm (from Z=0.0 to Z=130.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01128", "images": ["images/Shaft_01128.png", "detail_png/Shaft_01128_length.png", "detail_png/Shaft_01128_diam.png", "detail_png/Shaft_01128_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.1 mm and length at least 225.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 43.7 mm (from Z=0.0 to Z=201.4).\n10. Finish turn diameter Ø54.4 mm over length 14.3 mm (from Z=0.0 to Z=157.7).\n11. Finish turn diameter Ø48.1 mm over length 11.6 mm (from Z=0.0 to Z=143.4).\n12. Finish turn diameter Ø33.1 mm over length 76.0 mm (from Z=0.0 to Z=131.8).\n13. Finish turn diameter Ø30.0 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03273", "images": ["images/Shaft_03273.png", "detail_png/Shaft_03273_length.png", "detail_png/Shaft_03273_diam.png", "detail_png/Shaft_03273_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 80.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.3 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04303", "images": ["images/Shaft_04303.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.3 mm and length at least 274.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 127.5 mm (from Z=0.0 to Z=127.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 80.2 mm (from Z=0.0 to Z=142.3).\n10. Finish turn diameter Ø54.0 mm over length 24.7 mm (from Z=0.0 to Z=62.1).\n11. Finish turn diameter Ø35.8 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03333", "images": ["images/Shaft_03333.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.7 mm and length at least 313.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.1 mm over length 68.2 mm (from Z=0.0 to Z=287.4).\n10. Finish turn diameter Ø39.4 mm over length 95.3 mm (from Z=0.0 to Z=219.2).\n11. Finish turn diameter Ø30.0 mm over length 123.9 mm (from Z=0.0 to Z=123.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03413", "images": ["images/Shaft_03413.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.2 mm and length at least 114.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01775", "images": ["images/Shaft_01775.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.1 mm and length at least 108.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.1 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.2 mm over length 5.0 mm (from Z=0.0 to Z=69.1).\n9. Finish turn diameter Ø53.6 mm over length 29.4 mm (from Z=0.0 to Z=64.1).\n10. Finish turn diameter Ø47.2 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00654", "images": ["images/Shaft_00654.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 159.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 100.1 mm (from Z=0.0 to Z=100.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.6 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00399", "images": ["images/Shaft_00399.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.2 mm and length at least 211.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 67.1 mm (from Z=0.0 to Z=133.9).\n10. Finish turn diameter Ø30.0 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00504", "images": ["images/Shaft_00504.png", "detail_png/Shaft_00504_length.png", "detail_png/Shaft_00504_diam.png", "detail_png/Shaft_00504_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.2 mm and length at least 283.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 79.1 mm (from Z=0.0 to Z=79.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 199.4 mm (from Z=0.0 to Z=199.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02528", "images": ["images/Shaft_02528.png", "detail_png/Shaft_02528_length.png", "detail_png/Shaft_02528_diam.png", "detail_png/Shaft_02528_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.9 mm and length at least 303.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 69.7 mm (from Z=0.0 to Z=69.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 46.2 mm (from Z=0.0 to Z=228.3).\n10. Finish turn diameter Ø62.2 mm over length 57.2 mm (from Z=0.0 to Z=182.1).\n11. Finish turn diameter Ø50.7 mm over length 16.3 mm (from Z=0.0 to Z=124.9).\n12. Finish turn diameter Ø43.1 mm over length 37.3 mm (from Z=0.0 to Z=108.6).\n13. Finish turn diameter Ø30.4 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04205", "images": ["images/Shaft_04205.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.7 mm and length at least 85.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 17.7 mm (from Z=0.0 to Z=67.3).\n9. Finish turn diameter Ø37.1 mm over length 24.4 mm (from Z=0.0 to Z=49.6).\n10. Finish turn diameter Ø31.3 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01592", "images": ["images/Shaft_01592.png", "detail_png/Shaft_01592_length.png", "detail_png/Shaft_01592_diam.png", "detail_png/Shaft_01592_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.5 mm and length at least 253.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 131.4 mm (from Z=0.0 to Z=219.0).\n10. Finish turn diameter Ø30.0 mm over length 87.6 mm (from Z=0.0 to Z=87.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00209", "images": ["images/Shaft_00209.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.9 mm and length at least 122.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.4 mm over length 55.5 mm (from Z=0.0 to Z=72.3).\n9. Finish turn diameter Ø32.7 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04549", "images": ["images/Shaft_04549.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.0 mm and length at least 146.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 25.0 mm (from Z=0.0 to Z=117.4).\n10. Finish turn diameter Ø30.0 mm over length 92.4 mm (from Z=0.0 to Z=92.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04292", "images": ["images/Shaft_04292.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.2 mm and length at least 151.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 135.1 mm (from Z=0.0 to Z=135.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01829", "images": ["images/Shaft_01829.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.6 mm and length at least 152.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.8 mm (from Z=0.0 to Z=126.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03767", "images": ["images/Shaft_03767.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.3 mm and length at least 67.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.5 mm over length 12.4 mm (from Z=0.0 to Z=42.9).\n9. Finish turn diameter Ø35.1 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04463", "images": ["images/Shaft_04463.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.4 mm and length at least 120.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.4 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.9 mm over length 33.0 mm (from Z=0.0 to Z=79.7).\n9. Finish turn diameter Ø57.9 mm over length 27.9 mm (from Z=0.0 to Z=46.7).\n10. Finish turn diameter Ø46.1 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03264", "images": ["images/Shaft_03264.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 114.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 95.6 mm (from Z=0.0 to Z=95.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.2 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01016", "images": ["images/Shaft_01016.png", "detail_png/Shaft_01016_length.png", "detail_png/Shaft_01016_diam.png", "detail_png/Shaft_01016_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.5 mm and length at least 272.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 42.8 mm (from Z=0.0 to Z=212.0).\n10. Finish turn diameter Ø44.3 mm over length 58.1 mm (from Z=0.0 to Z=169.2).\n11. Finish turn diameter Ø38.6 mm over length 45.2 mm (from Z=0.0 to Z=111.1).\n12. Finish turn diameter Ø34.6 mm over length 65.9 mm (from Z=0.0 to Z=65.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02543", "images": ["images/Shaft_02543.png", "detail_png/Shaft_02543_length.png", "detail_png/Shaft_02543_diam.png", "detail_png/Shaft_02543_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.6 mm and length at least 135.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 51.6 mm (from Z=0.0 to Z=101.6).\n9. Finish turn diameter Ø30.0 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00243", "images": ["images/Shaft_00243.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.4 mm and length at least 110.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.8 mm over length 12.3 mm (from Z=0.0 to Z=94.3).\n9. Finish turn diameter Ø47.8 mm over length 24.1 mm (from Z=0.0 to Z=82.0).\n10. Finish turn diameter Ø38.0 mm over length 14.7 mm (from Z=0.0 to Z=57.9).\n11. Finish turn diameter Ø32.0 mm over length 14.1 mm (from Z=0.0 to Z=43.2).\n12. Finish turn diameter Ø30.0 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02676", "images": ["images/Shaft_02676.png", "detail_png/Shaft_02676_length.png", "detail_png/Shaft_02676_diam.png", "detail_png/Shaft_02676_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.7 mm and length at least 222.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.5 mm over length 93.6 mm (from Z=0.0 to Z=197.1).\n10. Finish turn diameter Ø32.5 mm over length 103.5 mm (from Z=0.0 to Z=103.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02056", "images": ["images/Shaft_02056.png", "detail_png/Shaft_02056_length.png", "detail_png/Shaft_02056_diam.png", "detail_png/Shaft_02056_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.1 mm and length at least 88.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 18.5 mm (from Z=0.0 to Z=18.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01030", "images": ["images/Shaft_01030.png", "detail_png/Shaft_01030_length.png", "detail_png/Shaft_01030_diam.png", "detail_png/Shaft_01030_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.8 mm and length at least 133.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.8 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 101.3 mm (from Z=0.0 to Z=101.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04723", "images": ["images/Shaft_04723.png", "detail_png/Shaft_04723_length.png", "detail_png/Shaft_04723_diam.png", "detail_png/Shaft_04723_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 254.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 108.2 mm (from Z=0.0 to Z=108.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 141.3 mm (from Z=0.0 to Z=141.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01421", "images": ["images/Shaft_01421.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 313.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.9 mm (from Z=0.0 to Z=221.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.1 mm over length 86.3 mm (from Z=0.0 to Z=86.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00991", "images": ["images/Shaft_00991.png", "detail_png/Shaft_00991_length.png", "detail_png/Shaft_00991_diam.png", "detail_png/Shaft_00991_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.1 mm and length at least 301.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.9 mm over length 60.2 mm (from Z=0.0 to Z=282.0).\n10. Finish turn diameter Ø34.9 mm over length 46.9 mm (from Z=0.0 to Z=221.8).\n11. Finish turn diameter Ø30.0 mm over length 174.9 mm (from Z=0.0 to Z=174.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01831", "images": ["images/Shaft_01831.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.2 mm and length at least 203.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 92.7 mm (from Z=0.0 to Z=92.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 52.6 mm (from Z=0.0 to Z=106.2).\n10. Finish turn diameter Ø52.9 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02921", "images": ["images/Shaft_02921.png", "detail_png/Shaft_02921_length.png", "detail_png/Shaft_02921_diam.png", "detail_png/Shaft_02921_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.7 mm and length at least 171.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.2 mm over length 42.0 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø30.0 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02948", "images": ["images/Shaft_02948.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.0 mm and length at least 255.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 236.9 mm (from Z=0.0 to Z=236.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04710", "images": ["images/Shaft_04710.png", "detail_png/Shaft_04710_length.png", "detail_png/Shaft_04710_diam.png", "detail_png/Shaft_04710_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.0 mm and length at least 284.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 67.4 mm (from Z=0.0 to Z=67.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 43.1 mm (from Z=0.0 to Z=212.5).\n10. Finish turn diameter Ø30.0 mm over length 169.4 mm (from Z=0.0 to Z=169.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03196", "images": ["images/Shaft_03196.png", "detail_png/Shaft_03196_length.png", "detail_png/Shaft_03196_diam.png", "detail_png/Shaft_03196_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.4 mm and length at least 243.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 110.1 mm (from Z=0.0 to Z=110.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.0 mm over length 30.2 mm (from Z=0.0 to Z=127.9).\n10. Finish turn diameter Ø40.1 mm over length 39.9 mm (from Z=0.0 to Z=97.7).\n11. Finish turn diameter Ø30.0 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04246", "images": ["images/Shaft_04246.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.8 mm and length at least 256.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.6 mm over length 23.9 mm (from Z=0.0 to Z=205.7).\n10. Finish turn diameter Ø30.0 mm over length 181.8 mm (from Z=0.0 to Z=181.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02505", "images": ["images/Shaft_02505.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.2 mm and length at least 76.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.9 mm over length 16.5 mm (from Z=0.0 to Z=66.2).\n9. Finish turn diameter Ø30.0 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00031", "images": ["images/Shaft_00031.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.3 mm and length at least 212.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 162.1 mm (from Z=0.0 to Z=162.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02252", "images": ["images/Shaft_02252.png", "detail_png/Shaft_02252_length.png", "detail_png/Shaft_02252_diam.png", "detail_png/Shaft_02252_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.6 mm and length at least 139.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.6 mm over length 25.9 mm (from Z=0.0 to Z=96.4).\n9. Finish turn diameter Ø53.6 mm over length 70.5 mm (from Z=0.0 to Z=70.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03120", "images": ["images/Shaft_03120.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 144.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 99.3 mm (from Z=0.0 to Z=99.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01077", "images": ["images/Shaft_01077.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.3 mm and length at least 221.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.3 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.4 mm over length 40.1 mm (from Z=0.0 to Z=195.0).\n10. Finish turn diameter Ø31.2 mm over length 27.8 mm (from Z=0.0 to Z=154.9).\n11. Finish turn diameter Ø30.0 mm over length 127.1 mm (from Z=0.0 to Z=127.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03752", "images": ["images/Shaft_03752.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.7 mm and length at least 145.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.2 mm over length 27.7 mm (from Z=0.0 to Z=107.4).\n9. Finish turn diameter Ø51.5 mm over length 31.7 mm (from Z=0.0 to Z=79.7).\n10. Finish turn diameter Ø43.9 mm over length 23.4 mm (from Z=0.0 to Z=48.0).\n11. Finish turn diameter Ø30.0 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01853", "images": ["images/Shaft_01853.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.3 mm and length at least 232.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.8 mm over length 42.0 mm (from Z=0.0 to Z=219.0).\n10. Finish turn diameter Ø30.0 mm over length 177.0 mm (from Z=0.0 to Z=177.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04921", "images": ["images/Shaft_04921.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.9 mm and length at least 280.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.4 mm over length 79.8 mm (from Z=0.0 to Z=235.2).\n10. Finish turn diameter Ø60.0 mm over length 28.8 mm (from Z=0.0 to Z=155.4).\n11. Finish turn diameter Ø46.8 mm over length 19.2 mm (from Z=0.0 to Z=126.6).\n12. Finish turn diameter Ø41.0 mm over length 41.2 mm (from Z=0.0 to Z=107.4).\n13. Finish turn diameter Ø32.9 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02611", "images": ["images/Shaft_02611.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.6 mm and length at least 89.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.5 mm over length 47.2 mm (from Z=0.0 to Z=67.8).\n9. Finish turn diameter Ø36.4 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02532", "images": ["images/Shaft_02532.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.5 mm and length at least 284.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.3 mm (from Z=0.0 to Z=229.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04318", "images": ["images/Shaft_04318.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.7 mm and length at least 97.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.7 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.2 mm over length 18.5 mm (from Z=0.0 to Z=68.7).\n9. Finish turn diameter Ø43.8 mm over length 17.9 mm (from Z=0.0 to Z=50.2).\n10. Finish turn diameter Ø30.0 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02965", "images": ["images/Shaft_02965.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.9 mm and length at least 281.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 64.0 mm (from Z=0.0 to Z=64.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 212.4 mm (from Z=0.0 to Z=212.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04794", "images": ["images/Shaft_04794.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.1 mm and length at least 208.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 53.2 mm (from Z=0.0 to Z=53.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 150.7 mm (from Z=0.0 to Z=150.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04507", "images": ["images/Shaft_04507.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 92.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.3 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03612", "images": ["images/Shaft_03612.png", "detail_png/Shaft_03612_length.png", "detail_png/Shaft_03612_diam.png", "detail_png/Shaft_03612_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.4 mm and length at least 190.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 47.4 mm (from Z=0.0 to Z=106.6).\n9. Finish turn diameter Ø48.2 mm over length 44.4 mm (from Z=0.0 to Z=59.2).\n10. Finish turn diameter Ø43.4 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03523", "images": ["images/Shaft_03523.png", "detail_png/Shaft_03523_length.png", "detail_png/Shaft_03523_diam.png", "detail_png/Shaft_03523_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.3 mm and length at least 222.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.6 mm over length 54.6 mm (from Z=0.0 to Z=189.2).\n10. Finish turn diameter Ø30.0 mm over length 134.6 mm (from Z=0.0 to Z=134.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02630", "images": ["images/Shaft_02630.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.7 mm and length at least 308.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.3 mm over length 58.2 mm (from Z=0.0 to Z=273.4).\n10. Finish turn diameter Ø47.0 mm over length 103.6 mm (from Z=0.0 to Z=215.2).\n11. Finish turn diameter Ø35.5 mm over length 111.6 mm (from Z=0.0 to Z=111.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01297", "images": ["images/Shaft_01297.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.3 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.3 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.1 mm over length 37.8 mm (from Z=0.0 to Z=99.4).\n9. Finish turn diameter Ø31.8 mm over length 6.5 mm (from Z=0.0 to Z=61.6).\n10. Finish turn diameter Ø30.0 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04321", "images": ["images/Shaft_04321.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.8 mm and length at least 226.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.5 mm over length 98.6 mm (from Z=0.0 to Z=152.3).\n10. Finish turn diameter Ø30.0 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01386", "images": ["images/Shaft_01386.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.1 mm and length at least 192.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.7 mm (from Z=0.0 to Z=126.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02500", "images": ["images/Shaft_02500.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.9 mm and length at least 309.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 60.5 mm (from Z=0.0 to Z=262.6).\n10. Finish turn diameter Ø30.0 mm over length 202.1 mm (from Z=0.0 to Z=202.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02927", "images": ["images/Shaft_02927.png", "detail_png/Shaft_02927_length.png", "detail_png/Shaft_02927_diam.png", "detail_png/Shaft_02927_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.8 mm and length at least 136.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.2 mm over length 30.6 mm (from Z=0.0 to Z=89.3).\n9. Finish turn diameter Ø44.9 mm over length 25.3 mm (from Z=0.0 to Z=58.7).\n10. Finish turn diameter Ø40.1 mm over length 15.8 mm (from Z=0.0 to Z=33.4).\n11. Finish turn diameter Ø32.7 mm over length 10.9 mm (from Z=0.0 to Z=17.6).\n12. Finish turn diameter Ø30.0 mm over length 6.7 mm (from Z=0.0 to Z=6.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03401", "images": ["images/Shaft_03401.png", "detail_png/Shaft_03401_length.png", "detail_png/Shaft_03401_diam.png", "detail_png/Shaft_03401_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.3 mm and length at least 278.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 233.8 mm (from Z=0.0 to Z=233.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00552", "images": ["images/Shaft_00552.png", "detail_png/Shaft_00552_length.png", "detail_png/Shaft_00552_diam.png", "detail_png/Shaft_00552_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.9 mm and length at least 147.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.9 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.8 mm over length 33.3 mm (from Z=0.0 to Z=114.5).\n9. Finish turn diameter Ø46.4 mm over length 26.2 mm (from Z=0.0 to Z=81.2).\n10. Finish turn diameter Ø35.8 mm over length 31.7 mm (from Z=0.0 to Z=55.0).\n11. Finish turn diameter Ø30.0 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01618", "images": ["images/Shaft_01618.png", "detail_png/Shaft_01618_length.png", "detail_png/Shaft_01618_diam.png", "detail_png/Shaft_01618_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.0 mm and length at least 167.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.5 mm over length 78.8 mm (from Z=0.0 to Z=122.9).\n9. Finish turn diameter Ø30.9 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04271", "images": ["images/Shaft_04271.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.5 mm and length at least 133.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 12.7 mm (from Z=0.0 to Z=102.1).\n9. Finish turn diameter Ø32.3 mm over length 22.3 mm (from Z=0.0 to Z=89.4).\n10. Finish turn diameter Ø30.0 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03016", "images": ["images/Shaft_03016.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.7 mm and length at least 188.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 123.8 mm (from Z=0.0 to Z=123.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03164", "images": ["images/Shaft_03164.png", "detail_png/Shaft_03164_length.png", "detail_png/Shaft_03164_diam.png", "detail_png/Shaft_03164_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.4 mm and length at least 273.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 155.3 mm (from Z=0.0 to Z=155.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.0 mm over length 57.8 mm (from Z=0.0 to Z=113.1).\n10. Finish turn diameter Ø35.8 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00538", "images": ["images/Shaft_00538.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.4 mm and length at least 262.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.4 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 42.6 mm (from Z=0.0 to Z=243.8).\n10. Finish turn diameter Ø53.9 mm over length 138.8 mm (from Z=0.0 to Z=201.2).\n11. Finish turn diameter Ø38.2 mm over length 62.4 mm (from Z=0.0 to Z=62.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01912", "images": ["images/Shaft_01912.png", "detail_png/Shaft_01912_length.png", "detail_png/Shaft_01912_diam.png", "detail_png/Shaft_01912_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.7 mm and length at least 81.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.7 mm over length 35.3 mm (from Z=0.0 to Z=65.5).\n9. Finish turn diameter Ø57.1 mm over length 7.3 mm (from Z=0.0 to Z=30.2).\n10. Finish turn diameter Ø43.0 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03387", "images": ["images/Shaft_03387.png", "detail_png/Shaft_03387_length.png", "detail_png/Shaft_03387_diam.png", "detail_png/Shaft_03387_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.2 mm and length at least 141.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.2 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.7 mm over length 24.1 mm (from Z=0.0 to Z=113.4).\n9. Finish turn diameter Ø37.2 mm over length 8.5 mm (from Z=0.0 to Z=89.3).\n10. Finish turn diameter Ø30.0 mm over length 80.8 mm (from Z=0.0 to Z=80.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03032", "images": ["images/Shaft_03032.png", "detail_png/Shaft_03032_length.png", "detail_png/Shaft_03032_diam.png", "detail_png/Shaft_03032_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.8 mm and length at least 144.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.8 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.8 mm over length 29.2 mm (from Z=0.0 to Z=108.4).\n9. Finish turn diameter Ø43.8 mm over length 31.9 mm (from Z=0.0 to Z=79.2).\n10. Finish turn diameter Ø40.3 mm over length 25.9 mm (from Z=0.0 to Z=47.3).\n11. Finish turn diameter Ø30.0 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01454", "images": ["images/Shaft_01454.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.3 mm and length at least 311.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 131.4 mm (from Z=0.0 to Z=232.9).\n10. Finish turn diameter Ø48.8 mm over length 17.0 mm (from Z=0.0 to Z=101.5).\n11. Finish turn diameter Ø43.5 mm over length 66.3 mm (from Z=0.0 to Z=84.5).\n12. Finish turn diameter Ø30.0 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02081", "images": ["images/Shaft_02081.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.5 mm and length at least 295.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 68.0 mm (from Z=0.0 to Z=68.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 84.6 mm (from Z=0.0 to Z=222.2).\n10. Finish turn diameter Ø36.5 mm over length 137.6 mm (from Z=0.0 to Z=137.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04748", "images": ["images/Shaft_04748.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 215.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 132.6 mm (from Z=0.0 to Z=132.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 78.0 mm (from Z=0.0 to Z=78.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01738", "images": ["images/Shaft_01738.png", "detail_png/Shaft_01738_length.png", "detail_png/Shaft_01738_diam.png", "detail_png/Shaft_01738_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.8 mm and length at least 107.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03521", "images": ["images/Shaft_03521.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.6 mm and length at least 169.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 133.2 mm (from Z=0.0 to Z=133.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01772", "images": ["images/Shaft_01772.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.3 mm and length at least 211.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 27.3 mm (from Z=0.0 to Z=27.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 179.3 mm (from Z=0.0 to Z=179.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01497", "images": ["images/Shaft_01497.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.4 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.1 mm over length 33.0 mm (from Z=0.0 to Z=173.9).\n10. Finish turn diameter Ø35.0 mm over length 19.3 mm (from Z=0.0 to Z=140.9).\n11. Finish turn diameter Ø30.0 mm over length 121.6 mm (from Z=0.0 to Z=121.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03316", "images": ["images/Shaft_03316.png", "detail_png/Shaft_03316_length.png", "detail_png/Shaft_03316_diam.png", "detail_png/Shaft_03316_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.7 mm and length at least 252.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 47.8 mm (from Z=0.0 to Z=185.6).\n10. Finish turn diameter Ø44.8 mm over length 61.5 mm (from Z=0.0 to Z=137.8).\n11. Finish turn diameter Ø36.0 mm over length 19.3 mm (from Z=0.0 to Z=76.3).\n12. Finish turn diameter Ø30.0 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00645", "images": ["images/Shaft_00645.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 170.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 142.3 mm (from Z=0.0 to Z=142.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.9 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00188", "images": ["images/Shaft_00188.png", "detail_png/Shaft_00188_length.png", "detail_png/Shaft_00188_diam.png", "detail_png/Shaft_00188_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.4 mm and length at least 149.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.4 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.0 mm over length 33.8 mm (from Z=0.0 to Z=91.4).\n9. Finish turn diameter Ø43.5 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01969", "images": ["images/Shaft_01969.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.4 mm and length at least 79.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.0 mm over length 36.0 mm (from Z=0.0 to Z=69.0).\n9. Finish turn diameter Ø53.7 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03759", "images": ["images/Shaft_03759.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.9 mm and length at least 241.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 64.9 mm (from Z=0.0 to Z=64.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.6 mm over length 66.7 mm (from Z=0.0 to Z=171.2).\n10. Finish turn diameter Ø30.0 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04581", "images": ["images/Shaft_04581.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.3 mm and length at least 313.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.3 mm over length 199.1 mm (from Z=0.0 to Z=199.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 109.5 mm (from Z=0.0 to Z=109.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04248", "images": ["images/Shaft_04248.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 259.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.5 mm over length 65.1 mm (from Z=0.0 to Z=179.1).\n10. Finish turn diameter Ø30.4 mm over length 82.1 mm (from Z=0.0 to Z=114.0).\n11. Finish turn diameter Ø30.0 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03907", "images": ["images/Shaft_03907.png", "detail_png/Shaft_03907_length.png", "detail_png/Shaft_03907_diam.png", "detail_png/Shaft_03907_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.7 mm and length at least 101.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.7 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.9 mm (from Z=0.0 to Z=84.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00067", "images": ["images/Shaft_00067.png", "detail_png/Shaft_00067_length.png", "detail_png/Shaft_00067_diam.png", "detail_png/Shaft_00067_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 169.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.0 mm (from Z=0.0 to Z=141.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.4 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03588", "images": ["images/Shaft_03588.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.2 mm and length at least 128.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02225", "images": ["images/Shaft_02225.png", "detail_png/Shaft_02225_length.png", "detail_png/Shaft_02225_diam.png", "detail_png/Shaft_02225_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.7 mm and length at least 287.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.7 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 72.4 mm (from Z=0.0 to Z=185.6).\n10. Finish turn diameter Ø30.0 mm over length 113.2 mm (from Z=0.0 to Z=113.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02832", "images": ["images/Shaft_02832.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.9 mm and length at least 236.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 131.7 mm (from Z=0.0 to Z=131.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 46.3 mm (from Z=0.0 to Z=99.8).\n10. Finish turn diameter Ø36.2 mm over length 18.7 mm (from Z=0.0 to Z=53.5).\n11. Finish turn diameter Ø30.8 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02990", "images": ["images/Shaft_02990.png", "detail_png/Shaft_02990_length.png", "detail_png/Shaft_02990_diam.png", "detail_png/Shaft_02990_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 307.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 245.7 mm (from Z=0.0 to Z=245.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 56.8 mm (from Z=0.0 to Z=56.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01082", "images": ["images/Shaft_01082.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.0 mm and length at least 110.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.6 mm over length 35.4 mm (from Z=0.0 to Z=66.4).\n9. Finish turn diameter Ø49.9 mm over length 12.5 mm (from Z=0.0 to Z=31.0).\n10. Finish turn diameter Ø43.5 mm over length 18.5 mm (from Z=0.0 to Z=18.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00232", "images": ["images/Shaft_00232.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.3 mm and length at least 221.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.3 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.6 mm (from Z=0.0 to Z=170.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03055", "images": ["images/Shaft_03055.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.7 mm and length at least 233.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 79.6 mm (from Z=0.0 to Z=79.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.9 mm over length 11.1 mm (from Z=0.0 to Z=148.5).\n10. Finish turn diameter Ø59.0 mm over length 27.8 mm (from Z=0.0 to Z=137.4).\n11. Finish turn diameter Ø46.1 mm over length 30.1 mm (from Z=0.0 to Z=109.6).\n12. Finish turn diameter Ø30.6 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04782", "images": ["images/Shaft_04782.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.3 mm and length at least 232.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 184.6 mm (from Z=0.0 to Z=184.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03317", "images": ["images/Shaft_03317.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.7 mm and length at least 65.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.8 mm over length 23.6 mm (from Z=0.0 to Z=53.1).\n9. Finish turn diameter Ø42.2 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03584", "images": ["images/Shaft_03584.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.3 mm and length at least 86.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.4 mm over length 27.6 mm (from Z=0.0 to Z=51.7).\n9. Finish turn diameter Ø34.8 mm over length 5.0 mm (from Z=0.0 to Z=24.1).\n10. Finish turn diameter Ø30.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04673", "images": ["images/Shaft_04673.png", "detail_png/Shaft_04673_length.png", "detail_png/Shaft_04673_diam.png", "detail_png/Shaft_04673_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.9 mm and length at least 189.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.9 mm over length 30.1 mm (from Z=0.0 to Z=146.8).\n9. Finish turn diameter Ø51.7 mm over length 35.3 mm (from Z=0.0 to Z=116.7).\n10. Finish turn diameter Ø41.1 mm over length 33.4 mm (from Z=0.0 to Z=81.4).\n11. Finish turn diameter Ø37.9 mm over length 24.8 mm (from Z=0.0 to Z=48.0).\n12. Finish turn diameter Ø30.0 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03322", "images": ["images/Shaft_03322.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.5 mm and length at least 74.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.4 mm over length 15.5 mm (from Z=0.0 to Z=64.1).\n9. Finish turn diameter Ø40.0 mm over length 19.9 mm (from Z=0.0 to Z=48.6).\n10. Finish turn diameter Ø30.0 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03979", "images": ["images/Shaft_03979.png", "detail_png/Shaft_03979_length.png", "detail_png/Shaft_03979_diam.png", "detail_png/Shaft_03979_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.5 mm and length at least 261.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 79.7 mm (from Z=0.0 to Z=79.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 61.1 mm (from Z=0.0 to Z=177.0).\n10. Finish turn diameter Ø57.4 mm over length 18.7 mm (from Z=0.0 to Z=115.9).\n11. Finish turn diameter Ø43.7 mm over length 97.2 mm (from Z=0.0 to Z=97.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02800", "images": ["images/Shaft_02800.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.1 mm and length at least 230.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 129.2 mm (from Z=0.0 to Z=129.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.4 mm over length 25.6 mm (from Z=0.0 to Z=95.8).\n10. Finish turn diameter Ø51.4 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04114", "images": ["images/Shaft_04114.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.1 mm and length at least 191.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 24.9 mm (from Z=0.0 to Z=162.6).\n10. Finish turn diameter Ø30.0 mm over length 137.7 mm (from Z=0.0 to Z=137.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04877", "images": ["images/Shaft_04877.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.3 mm and length at least 293.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.2 mm over length 55.1 mm (from Z=0.0 to Z=266.7).\n10. Finish turn diameter Ø36.3 mm over length 97.1 mm (from Z=0.0 to Z=211.6).\n11. Finish turn diameter Ø30.0 mm over length 114.5 mm (from Z=0.0 to Z=114.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01467", "images": ["images/Shaft_01467.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.9 mm and length at least 237.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.5 mm (from Z=0.0 to Z=190.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03394", "images": ["images/Shaft_03394.png", "detail_png/Shaft_03394_length.png", "detail_png/Shaft_03394_diam.png", "detail_png/Shaft_03394_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.1 mm and length at least 217.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 76.1 mm (from Z=0.0 to Z=76.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.3 mm over length 62.9 mm (from Z=0.0 to Z=136.6).\n10. Finish turn diameter Ø30.0 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02631", "images": ["images/Shaft_02631.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.0 mm and length at least 291.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.0 mm over length 127.3 mm (from Z=0.0 to Z=127.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 158.8 mm (from Z=0.0 to Z=158.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01499", "images": ["images/Shaft_01499.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.9 mm and length at least 213.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.4 mm (from Z=0.0 to Z=170.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03438", "images": ["images/Shaft_03438.png", "detail_png/Shaft_03438_length.png", "detail_png/Shaft_03438_diam.png", "detail_png/Shaft_03438_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.4 mm and length at least 170.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 154.5 mm (from Z=0.0 to Z=154.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02285", "images": ["images/Shaft_02285.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.0 mm and length at least 133.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.0 mm over length 17.4 mm (from Z=0.0 to Z=110.2).\n9. Finish turn diameter Ø51.2 mm over length 32.0 mm (from Z=0.0 to Z=92.8).\n10. Finish turn diameter Ø37.7 mm over length 33.4 mm (from Z=0.0 to Z=60.8).\n11. Finish turn diameter Ø32.4 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01531", "images": ["images/Shaft_01531.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 311.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 203.6 mm (from Z=0.0 to Z=203.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 103.3 mm (from Z=0.0 to Z=103.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00747", "images": ["images/Shaft_00747.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.6 mm and length at least 152.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.9 mm over length 45.1 mm (from Z=0.0 to Z=127.2).\n9. Finish turn diameter Ø55.1 mm over length 32.3 mm (from Z=0.0 to Z=82.1).\n10. Finish turn diameter Ø50.8 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03360", "images": ["images/Shaft_03360.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.8 mm and length at least 214.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 165.7 mm (from Z=0.0 to Z=165.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04618", "images": ["images/Shaft_04618.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.0 mm and length at least 316.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.7 mm over length 64.9 mm (from Z=0.0 to Z=244.5).\n10. Finish turn diameter Ø54.5 mm over length 89.9 mm (from Z=0.0 to Z=179.6).\n11. Finish turn diameter Ø50.8 mm over length 19.5 mm (from Z=0.0 to Z=89.7).\n12. Finish turn diameter Ø42.3 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02705", "images": ["images/Shaft_02705.png", "detail_png/Shaft_02705_length.png", "detail_png/Shaft_02705_diam.png", "detail_png/Shaft_02705_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.7 mm and length at least 93.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.7 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04216", "images": ["images/Shaft_04216.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.3 mm and length at least 91.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.5 mm over length 28.4 mm (from Z=0.0 to Z=46.6).\n9. Finish turn diameter Ø30.0 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03452", "images": ["images/Shaft_03452.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.7 mm and length at least 295.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 104.8 mm (from Z=0.0 to Z=104.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.8 mm over length 62.9 mm (from Z=0.0 to Z=185.5).\n10. Finish turn diameter Ø32.6 mm over length 89.3 mm (from Z=0.0 to Z=122.6).\n11. Finish turn diameter Ø30.0 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01471", "images": ["images/Shaft_01471.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.3 mm and length at least 69.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 42.9 mm (from Z=0.0 to Z=42.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03334", "images": ["images/Shaft_03334.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.7 mm and length at least 195.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.8 mm over length 61.0 mm (from Z=0.0 to Z=167.5).\n9. Finish turn diameter Ø44.4 mm over length 39.9 mm (from Z=0.0 to Z=106.5).\n10. Finish turn diameter Ø37.2 mm over length 50.3 mm (from Z=0.0 to Z=66.6).\n11. Finish turn diameter Ø30.0 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04090", "images": ["images/Shaft_04090.png", "detail_png/Shaft_04090_length.png", "detail_png/Shaft_04090_diam.png", "detail_png/Shaft_04090_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.5 mm and length at least 151.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 130.9 mm (from Z=0.0 to Z=130.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00916", "images": ["images/Shaft_00916.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.6 mm and length at least 315.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 100.4 mm (from Z=0.0 to Z=244.2).\n10. Finish turn diameter Ø47.4 mm over length 41.0 mm (from Z=0.0 to Z=143.8).\n11. Finish turn diameter Ø32.5 mm over length 102.8 mm (from Z=0.0 to Z=102.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04879", "images": ["images/Shaft_04879.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.6 mm and length at least 221.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 203.3 mm (from Z=0.0 to Z=203.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04123", "images": ["images/Shaft_04123.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 206.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 132.9 mm (from Z=0.0 to Z=132.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.9 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00994", "images": ["images/Shaft_00994.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.2 mm and length at least 257.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 88.2 mm (from Z=0.0 to Z=88.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 67.8 mm (from Z=0.0 to Z=164.6).\n10. Finish turn diameter Ø48.6 mm over length 96.8 mm (from Z=0.0 to Z=96.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03623", "images": ["images/Shaft_03623.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.7 mm and length at least 306.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 250.0 mm (from Z=0.0 to Z=250.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02893", "images": ["images/Shaft_02893.png", "detail_png/Shaft_02893_length.png", "detail_png/Shaft_02893_diam.png", "detail_png/Shaft_02893_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.2 mm and length at least 161.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.7 mm over length 69.8 mm (from Z=0.0 to Z=117.5).\n9. Finish turn diameter Ø30.6 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01105", "images": ["images/Shaft_01105.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.1 mm and length at least 269.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 77.4 mm (from Z=0.0 to Z=77.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.7 mm over length 77.0 mm (from Z=0.0 to Z=186.9).\n10. Finish turn diameter Ø30.0 mm over length 109.9 mm (from Z=0.0 to Z=109.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02495", "images": ["images/Shaft_02495.png", "detail_png/Shaft_02495_length.png", "detail_png/Shaft_02495_diam.png", "detail_png/Shaft_02495_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 112.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.0 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04682", "images": ["images/Shaft_04682.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.2 mm and length at least 249.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.0 mm (from Z=0.0 to Z=191.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01257", "images": ["images/Shaft_01257.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.1 mm and length at least 152.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 103.1 mm (from Z=0.0 to Z=103.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04891", "images": ["images/Shaft_04891.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.0 mm and length at least 306.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.8 mm over length 61.9 mm (from Z=0.0 to Z=288.8).\n10. Finish turn diameter Ø49.9 mm over length 49.4 mm (from Z=0.0 to Z=226.9).\n11. Finish turn diameter Ø36.5 mm over length 93.8 mm (from Z=0.0 to Z=177.5).\n12. Finish turn diameter Ø30.0 mm over length 83.7 mm (from Z=0.0 to Z=83.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00873", "images": ["images/Shaft_00873.png", "detail_png/Shaft_00873_length.png", "detail_png/Shaft_00873_diam.png", "detail_png/Shaft_00873_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 106.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 76.0 mm (from Z=0.0 to Z=76.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.1 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01081", "images": ["images/Shaft_01081.png", "detail_png/Shaft_01081_length.png", "detail_png/Shaft_01081_diam.png", "detail_png/Shaft_01081_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.0 mm and length at least 318.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 108.2 mm (from Z=0.0 to Z=108.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.8 mm over length 21.6 mm (from Z=0.0 to Z=205.3).\n10. Finish turn diameter Ø30.0 mm over length 183.7 mm (from Z=0.0 to Z=183.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03450", "images": ["images/Shaft_03450.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.0 mm and length at least 119.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.8 mm over length 10.2 mm (from Z=0.0 to Z=82.2).\n9. Finish turn diameter Ø30.0 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03746", "images": ["images/Shaft_03746.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.4 mm and length at least 81.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.7 mm over length 9.4 mm (from Z=0.0 to Z=61.5).\n9. Finish turn diameter Ø64.6 mm over length 29.0 mm (from Z=0.0 to Z=52.1).\n10. Finish turn diameter Ø47.1 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01976", "images": ["images/Shaft_01976.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.7 mm and length at least 199.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.1 mm over length 38.2 mm (from Z=0.0 to Z=169.2).\n10. Finish turn diameter Ø33.3 mm over length 73.1 mm (from Z=0.0 to Z=131.0).\n11. Finish turn diameter Ø30.0 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01511", "images": ["images/Shaft_01511.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.7 mm and length at least 230.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.5 mm over length 114.1 mm (from Z=0.0 to Z=184.2).\n10. Finish turn diameter Ø30.0 mm over length 70.1 mm (from Z=0.0 to Z=70.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03069", "images": ["images/Shaft_03069.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 220.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.7 mm over length 167.1 mm (from Z=0.0 to Z=167.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01630", "images": ["images/Shaft_01630.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.0 mm and length at least 295.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 92.9 mm (from Z=0.0 to Z=92.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 90.1 mm (from Z=0.0 to Z=197.7).\n10. Finish turn diameter Ø30.0 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00218", "images": ["images/Shaft_00218.png", "detail_png/Shaft_00218_length.png", "detail_png/Shaft_00218_diam.png", "detail_png/Shaft_00218_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.7 mm and length at least 324.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 115.3 mm (from Z=0.0 to Z=115.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 100.1 mm (from Z=0.0 to Z=204.3).\n10. Finish turn diameter Ø44.3 mm over length 104.2 mm (from Z=0.0 to Z=104.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03084", "images": ["images/Shaft_03084.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.8 mm and length at least 281.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.2 mm (from Z=0.0 to Z=224.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01452", "images": ["images/Shaft_01452.png", "detail_png/Shaft_01452_length.png", "detail_png/Shaft_01452_diam.png", "detail_png/Shaft_01452_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.4 mm and length at least 177.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.3 mm over length 67.2 mm (from Z=0.0 to Z=157.4).\n10. Finish turn diameter Ø30.0 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04990", "images": ["images/Shaft_04990.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.9 mm and length at least 219.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.3 mm over length 40.1 mm (from Z=0.0 to Z=144.6).\n10. Finish turn diameter Ø30.0 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00256", "images": ["images/Shaft_00256.png", "detail_png/Shaft_00256_length.png", "detail_png/Shaft_00256_diam.png", "detail_png/Shaft_00256_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.0 mm and length at least 145.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.7 mm over length 18.4 mm (from Z=0.0 to Z=127.1).\n9. Finish turn diameter Ø47.2 mm over length 108.7 mm (from Z=0.0 to Z=108.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01978", "images": ["images/Shaft_01978.png", "detail_png/Shaft_01978_length.png", "detail_png/Shaft_01978_diam.png", "detail_png/Shaft_01978_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 279.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 246.8 mm (from Z=0.0 to Z=246.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02811", "images": ["images/Shaft_02811.png", "detail_png/Shaft_02811_length.png", "detail_png/Shaft_02811_diam.png", "detail_png/Shaft_02811_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.4 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 78.6 mm (from Z=0.0 to Z=78.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.9 mm over length 45.3 mm (from Z=0.0 to Z=160.3).\n10. Finish turn diameter Ø36.3 mm over length 87.5 mm (from Z=0.0 to Z=115.0).\n11. Finish turn diameter Ø31.7 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02177", "images": ["images/Shaft_02177.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.8 mm and length at least 170.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.7 mm over length 49.2 mm (from Z=0.0 to Z=157.5).\n9. Finish turn diameter Ø53.3 mm over length 40.1 mm (from Z=0.0 to Z=108.3).\n10. Finish turn diameter Ø42.8 mm over length 37.2 mm (from Z=0.0 to Z=68.2).\n11. Finish turn diameter Ø37.9 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04889", "images": ["images/Shaft_04889.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 320.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 192.0 mm (from Z=0.0 to Z=192.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 123.4 mm (from Z=0.0 to Z=123.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02724", "images": ["images/Shaft_02724.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 91.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.5 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01803", "images": ["images/Shaft_01803.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.4 mm and length at least 221.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.7 mm (from Z=0.0 to Z=191.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02756", "images": ["images/Shaft_02756.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.7 mm and length at least 149.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.6 mm over length 54.2 mm (from Z=0.0 to Z=131.8).\n9. Finish turn diameter Ø41.6 mm over length 36.8 mm (from Z=0.0 to Z=77.6).\n10. Finish turn diameter Ø33.8 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03392", "images": ["images/Shaft_03392.png", "detail_png/Shaft_03392_length.png", "detail_png/Shaft_03392_diam.png", "detail_png/Shaft_03392_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.4 mm and length at least 212.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.4 mm (from Z=0.0 to Z=164.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01380", "images": ["images/Shaft_01380.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.6 mm and length at least 85.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.1 mm over length 19.4 mm (from Z=0.0 to Z=64.7).\n9. Finish turn diameter Ø42.2 mm over length 5.0 mm (from Z=0.0 to Z=45.3).\n10. Finish turn diameter Ø30.4 mm over length 13.4 mm (from Z=0.0 to Z=40.3).\n11. Finish turn diameter Ø30.0 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00028", "images": ["images/Shaft_00028.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.2 mm and length at least 137.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.1 mm over length 33.0 mm (from Z=0.0 to Z=119.1).\n9. Finish turn diameter Ø45.3 mm over length 30.2 mm (from Z=0.0 to Z=86.1).\n10. Finish turn diameter Ø30.0 mm over length 55.9 mm (from Z=0.0 to Z=55.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02198", "images": ["images/Shaft_02198.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.3 mm and length at least 117.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 43.9 mm (from Z=0.0 to Z=82.1).\n9. Finish turn diameter Ø34.8 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04779", "images": ["images/Shaft_04779.png", "detail_png/Shaft_04779_length.png", "detail_png/Shaft_04779_diam.png", "detail_png/Shaft_04779_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 122.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.0 mm over length 26.4 mm (from Z=0.0 to Z=104.2).\n9. Finish turn diameter Ø34.0 mm over length 5.8 mm (from Z=0.0 to Z=77.8).\n10. Finish turn diameter Ø30.0 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00463", "images": ["images/Shaft_00463.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.9 mm and length at least 186.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 36.5 mm (from Z=0.0 to Z=36.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.0 mm over length 17.2 mm (from Z=0.0 to Z=145.3).\n10. Finish turn diameter Ø30.0 mm over length 128.1 mm (from Z=0.0 to Z=128.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03607", "images": ["images/Shaft_03607.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.9 mm and length at least 199.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 16.8 mm (from Z=0.0 to Z=148.9).\n10. Finish turn diameter Ø30.0 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02522", "images": ["images/Shaft_02522.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.8 mm and length at least 84.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.8 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00293", "images": ["images/Shaft_00293.png", "detail_png/Shaft_00293_length.png", "detail_png/Shaft_00293_diam.png", "detail_png/Shaft_00293_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.0 mm and length at least 239.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 54.2 mm (from Z=0.0 to Z=54.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 47.3 mm (from Z=0.0 to Z=180.6).\n10. Finish turn diameter Ø50.6 mm over length 19.8 mm (from Z=0.0 to Z=133.3).\n11. Finish turn diameter Ø40.8 mm over length 38.4 mm (from Z=0.0 to Z=113.5).\n12. Finish turn diameter Ø35.5 mm over length 27.0 mm (from Z=0.0 to Z=75.1).\n13. Finish turn diameter Ø30.0 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02825", "images": ["images/Shaft_02825.png", "detail_png/Shaft_02825_length.png", "detail_png/Shaft_02825_diam.png", "detail_png/Shaft_02825_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.5 mm and length at least 316.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.1 mm over length 67.5 mm (from Z=0.0 to Z=252.2).\n10. Finish turn diameter Ø65.3 mm over length 67.1 mm (from Z=0.0 to Z=184.7).\n11. Finish turn diameter Ø49.4 mm over length 42.7 mm (from Z=0.0 to Z=117.6).\n12. Finish turn diameter Ø38.7 mm over length 56.6 mm (from Z=0.0 to Z=74.9).\n13. Finish turn diameter Ø30.0 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01074", "images": ["images/Shaft_01074.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.8 mm and length at least 266.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.3 mm over length 91.6 mm (from Z=0.0 to Z=182.2).\n10. Finish turn diameter Ø35.7 mm over length 10.3 mm (from Z=0.0 to Z=90.6).\n11. Finish turn diameter Ø30.0 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04770", "images": ["images/Shaft_04770.png", "detail_png/Shaft_04770_length.png", "detail_png/Shaft_04770_diam.png", "detail_png/Shaft_04770_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.1 mm and length at least 263.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 203.6 mm (from Z=0.0 to Z=203.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02862", "images": ["images/Shaft_02862.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.6 mm and length at least 208.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 186.4 mm (from Z=0.0 to Z=186.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04196", "images": ["images/Shaft_04196.png", "detail_png/Shaft_04196_length.png", "detail_png/Shaft_04196_diam.png", "detail_png/Shaft_04196_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.4 mm and length at least 243.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.4 mm over length 61.5 mm (from Z=0.0 to Z=226.5).\n10. Finish turn diameter Ø46.7 mm over length 52.6 mm (from Z=0.0 to Z=165.0).\n11. Finish turn diameter Ø30.0 mm over length 112.4 mm (from Z=0.0 to Z=112.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01622", "images": ["images/Shaft_01622.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.5 mm and length at least 162.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 29.0 mm (from Z=0.0 to Z=102.9).\n9. Finish turn diameter Ø30.0 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00374", "images": ["images/Shaft_00374.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.0 mm and length at least 296.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.8 mm over length 100.1 mm (from Z=0.0 to Z=261.9).\n10. Finish turn diameter Ø30.0 mm over length 161.8 mm (from Z=0.0 to Z=161.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02491", "images": ["images/Shaft_02491.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 264.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.2 mm (from Z=0.0 to Z=141.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.4 mm over length 118.0 mm (from Z=0.0 to Z=118.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00933", "images": ["images/Shaft_00933.png", "detail_png/Shaft_00933_length.png", "detail_png/Shaft_00933_diam.png", "detail_png/Shaft_00933_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 138.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 80.1 mm (from Z=0.0 to Z=80.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.4 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04737", "images": ["images/Shaft_04737.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.1 mm and length at least 190.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 73.0 mm (from Z=0.0 to Z=73.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 112.7 mm (from Z=0.0 to Z=112.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02661", "images": ["images/Shaft_02661.png", "detail_png/Shaft_02661_length.png", "detail_png/Shaft_02661_diam.png", "detail_png/Shaft_02661_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.3 mm and length at least 172.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 106.9 mm (from Z=0.0 to Z=106.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04399", "images": ["images/Shaft_04399.png", "detail_png/Shaft_04399_length.png", "detail_png/Shaft_04399_diam.png", "detail_png/Shaft_04399_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.2 mm and length at least 311.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.2 mm over length 79.7 mm (from Z=0.0 to Z=79.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 226.8 mm (from Z=0.0 to Z=226.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02868", "images": ["images/Shaft_02868.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.0 mm and length at least 287.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 145.1 mm (from Z=0.0 to Z=214.6).\n10. Finish turn diameter Ø33.3 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00806", "images": ["images/Shaft_00806.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.9 mm and length at least 135.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.1 mm over length 10.4 mm (from Z=0.0 to Z=86.0).\n9. Finish turn diameter Ø36.6 mm over length 20.9 mm (from Z=0.0 to Z=75.6).\n10. Finish turn diameter Ø30.0 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01253", "images": ["images/Shaft_01253.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.7 mm and length at least 128.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.9 mm over length 33.0 mm (from Z=0.0 to Z=91.7).\n9. Finish turn diameter Ø44.8 mm over length 27.8 mm (from Z=0.0 to Z=58.7).\n10. Finish turn diameter Ø39.4 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02060", "images": ["images/Shaft_02060.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 116.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.8 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00381", "images": ["images/Shaft_00381.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.7 mm and length at least 114.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.7 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.5 mm over length 40.7 mm (from Z=0.0 to Z=92.3).\n9. Finish turn diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02134", "images": ["images/Shaft_02134.png", "detail_png/Shaft_02134_length.png", "detail_png/Shaft_02134_diam.png", "detail_png/Shaft_02134_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.6 mm and length at least 79.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04187", "images": ["images/Shaft_04187.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.0 mm and length at least 279.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.0 mm over length 51.4 mm (from Z=0.0 to Z=51.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 109.2 mm (from Z=0.0 to Z=223.5).\n10. Finish turn diameter Ø30.0 mm over length 114.3 mm (from Z=0.0 to Z=114.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02189", "images": ["images/Shaft_02189.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.5 mm and length at least 200.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.5 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 63.6 mm (from Z=0.0 to Z=131.7).\n10. Finish turn diameter Ø41.9 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00900", "images": ["images/Shaft_00900.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.4 mm and length at least 218.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.4 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.4 mm over length 97.6 mm (from Z=0.0 to Z=202.4).\n10. Finish turn diameter Ø30.0 mm over length 104.8 mm (from Z=0.0 to Z=104.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04056", "images": ["images/Shaft_04056.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.0 mm and length at least 95.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.2 mm over length 35.5 mm (from Z=0.0 to Z=71.6).\n9. Finish turn diameter Ø30.0 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02359", "images": ["images/Shaft_02359.png", "detail_png/Shaft_02359_length.png", "detail_png/Shaft_02359_diam.png", "detail_png/Shaft_02359_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.3 mm and length at least 226.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 37.0 mm (from Z=0.0 to Z=190.2).\n10. Finish turn diameter Ø41.8 mm over length 55.6 mm (from Z=0.0 to Z=153.2).\n11. Finish turn diameter Ø30.0 mm over length 97.6 mm (from Z=0.0 to Z=97.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02912", "images": ["images/Shaft_02912.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.7 mm and length at least 302.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.7 mm over length 72.2 mm (from Z=0.0 to Z=225.8).\n10. Finish turn diameter Ø30.0 mm over length 153.6 mm (from Z=0.0 to Z=153.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03764", "images": ["images/Shaft_03764.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 179.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 119.3 mm (from Z=0.0 to Z=119.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.9 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03601", "images": ["images/Shaft_03601.png", "detail_png/Shaft_03601_length.png", "detail_png/Shaft_03601_diam.png", "detail_png/Shaft_03601_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 117.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 105.1 mm (from Z=0.0 to Z=105.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.9 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01595", "images": ["images/Shaft_01595.png", "detail_png/Shaft_01595_length.png", "detail_png/Shaft_01595_diam.png", "detail_png/Shaft_01595_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.2 mm and length at least 87.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 18.2 mm (from Z=0.0 to Z=43.5).\n9. Finish turn diameter Ø44.0 mm over length 18.3 mm (from Z=0.0 to Z=25.3).\n10. Finish turn diameter Ø32.3 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01252", "images": ["images/Shaft_01252.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.0 mm and length at least 153.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.4 mm over length 89.4 mm (from Z=0.0 to Z=130.5).\n9. Finish turn diameter Ø39.8 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00980", "images": ["images/Shaft_00980.png", "detail_png/Shaft_00980_length.png", "detail_png/Shaft_00980_diam.png", "detail_png/Shaft_00980_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.5 mm and length at least 218.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 129.2 mm (from Z=0.0 to Z=129.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.4 mm over length 30.5 mm (from Z=0.0 to Z=84.5).\n10. Finish turn diameter Ø30.0 mm over length 54.0 mm (from Z=0.0 to Z=54.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03415", "images": ["images/Shaft_03415.png", "detail_png/Shaft_03415_length.png", "detail_png/Shaft_03415_diam.png", "detail_png/Shaft_03415_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.8 mm and length at least 269.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.8 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 205.3 mm (from Z=0.0 to Z=205.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03301", "images": ["images/Shaft_03301.png", "detail_png/Shaft_03301_length.png", "detail_png/Shaft_03301_diam.png", "detail_png/Shaft_03301_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.0 mm and length at least 145.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 40.0 mm (from Z=0.0 to Z=40.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.5 mm over length 30.7 mm (from Z=0.0 to Z=100.7).\n9. Finish turn diameter Ø34.6 mm over length 31.5 mm (from Z=0.0 to Z=70.0).\n10. Finish turn diameter Ø30.0 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04045", "images": ["images/Shaft_04045.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.1 mm and length at least 155.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 13.7 mm (from Z=0.0 to Z=127.3).\n9. Finish turn diameter Ø35.1 mm over length 22.8 mm (from Z=0.0 to Z=113.6).\n10. Finish turn diameter Ø31.0 mm over length 19.3 mm (from Z=0.0 to Z=90.8).\n11. Finish turn diameter Ø30.0 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02399", "images": ["images/Shaft_02399.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.7 mm and length at least 282.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.8 mm over length 55.6 mm (from Z=0.0 to Z=235.4).\n10. Finish turn diameter Ø44.9 mm over length 60.6 mm (from Z=0.0 to Z=179.8).\n11. Finish turn diameter Ø38.1 mm over length 78.0 mm (from Z=0.0 to Z=119.2).\n12. Finish turn diameter Ø30.5 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02874", "images": ["images/Shaft_02874.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.3 mm and length at least 321.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 193.0 mm (from Z=0.0 to Z=193.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.3 mm over length 62.1 mm (from Z=0.0 to Z=123.0).\n10. Finish turn diameter Ø62.3 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01932", "images": ["images/Shaft_01932.png", "detail_png/Shaft_01932_length.png", "detail_png/Shaft_01932_diam.png", "detail_png/Shaft_01932_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.1 mm and length at least 119.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.8 mm over length 28.5 mm (from Z=0.0 to Z=103.7).\n9. Finish turn diameter Ø42.1 mm over length 27.3 mm (from Z=0.0 to Z=75.2).\n10. Finish turn diameter Ø33.8 mm over length 9.9 mm (from Z=0.0 to Z=47.9).\n11. Finish turn diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04647", "images": ["images/Shaft_04647.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.9 mm and length at least 153.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04502", "images": ["images/Shaft_04502.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.6 mm and length at least 183.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.5 mm (from Z=0.0 to Z=126.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04637", "images": ["images/Shaft_04637.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.9 mm and length at least 92.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 22.6 mm (from Z=0.0 to Z=75.8).\n9. Finish turn diameter Ø30.0 mm over length 53.2 mm (from Z=0.0 to Z=53.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02191", "images": ["images/Shaft_02191.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 151.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 91.1 mm (from Z=0.0 to Z=91.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.9 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03494", "images": ["images/Shaft_03494.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 74.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.4 mm over length 6.3 mm (from Z=0.0 to Z=6.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02112", "images": ["images/Shaft_02112.png", "detail_png/Shaft_02112_length.png", "detail_png/Shaft_02112_diam.png", "detail_png/Shaft_02112_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.5 mm and length at least 124.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02551", "images": ["images/Shaft_02551.png", "detail_png/Shaft_02551_length.png", "detail_png/Shaft_02551_diam.png", "detail_png/Shaft_02551_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.9 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 134.9 mm (from Z=0.0 to Z=134.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 66.5 mm (from Z=0.0 to Z=66.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04354", "images": ["images/Shaft_04354.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.2 mm and length at least 140.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.2 mm over length 20.8 mm (from Z=0.0 to Z=97.6).\n9. Finish turn diameter Ø31.0 mm over length 42.2 mm (from Z=0.0 to Z=76.8).\n10. Finish turn diameter Ø30.0 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03188", "images": ["images/Shaft_03188.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 95.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.1 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01580", "images": ["images/Shaft_01580.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.6 mm and length at least 269.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 248.1 mm (from Z=0.0 to Z=248.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01701", "images": ["images/Shaft_01701.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.9 mm and length at least 96.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.5 mm over length 20.1 mm (from Z=0.0 to Z=60.9).\n9. Finish turn diameter Ø30.0 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00854", "images": ["images/Shaft_00854.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.2 mm and length at least 196.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.4 mm over length 74.3 mm (from Z=0.0 to Z=133.3).\n10. Finish turn diameter Ø30.0 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00182", "images": ["images/Shaft_00182.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.7 mm and length at least 250.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 9.7 mm (from Z=0.0 to Z=9.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 21.2 mm (from Z=0.0 to Z=235.4).\n10. Finish turn diameter Ø46.5 mm over length 55.8 mm (from Z=0.0 to Z=214.2).\n11. Finish turn diameter Ø30.5 mm over length 69.4 mm (from Z=0.0 to Z=158.4).\n12. Finish turn diameter Ø30.0 mm over length 89.0 mm (from Z=0.0 to Z=89.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03682", "images": ["images/Shaft_03682.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.7 mm and length at least 179.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.6 mm over length 47.6 mm (from Z=0.0 to Z=133.5).\n9. Finish turn diameter Ø49.0 mm over length 34.3 mm (from Z=0.0 to Z=85.9).\n10. Finish turn diameter Ø33.7 mm over length 35.8 mm (from Z=0.0 to Z=51.6).\n11. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02120", "images": ["images/Shaft_02120.png", "detail_png/Shaft_02120_length.png", "detail_png/Shaft_02120_diam.png", "detail_png/Shaft_02120_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 243.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 196.1 mm (from Z=0.0 to Z=196.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.7 mm over length 42.2 mm (from Z=0.0 to Z=42.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04825", "images": ["images/Shaft_04825.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.2 mm and length at least 107.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.2 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.9 mm over length 6.4 mm (from Z=0.0 to Z=68.5).\n9. Finish turn diameter Ø48.1 mm over length 21.9 mm (from Z=0.0 to Z=62.1).\n10. Finish turn diameter Ø35.9 mm over length 8.5 mm (from Z=0.0 to Z=40.2).\n11. Finish turn diameter Ø30.0 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00018", "images": ["images/Shaft_00018.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.9 mm and length at least 76.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.0 mm over length 37.0 mm (from Z=0.0 to Z=47.0).\n9. Finish turn diameter Ø58.1 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02835", "images": ["images/Shaft_02835.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.4 mm and length at least 273.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.9 mm (from Z=0.0 to Z=191.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03696", "images": ["images/Shaft_03696.png", "detail_png/Shaft_03696_length.png", "detail_png/Shaft_03696_diam.png", "detail_png/Shaft_03696_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.7 mm and length at least 67.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.4 mm over length 10.4 mm (from Z=0.0 to Z=46.9).\n9. Finish turn diameter Ø30.0 mm over length 36.5 mm (from Z=0.0 to Z=36.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02762", "images": ["images/Shaft_02762.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.5 mm and length at least 229.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 18.2 mm (from Z=0.0 to Z=167.4).\n10. Finish turn diameter Ø55.4 mm over length 30.5 mm (from Z=0.0 to Z=149.2).\n11. Finish turn diameter Ø36.0 mm over length 33.7 mm (from Z=0.0 to Z=118.7).\n12. Finish turn diameter Ø30.0 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01524", "images": ["images/Shaft_01524.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.9 mm and length at least 243.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 188.0 mm (from Z=0.0 to Z=188.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01700", "images": ["images/Shaft_01700.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.8 mm and length at least 243.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.3 mm (from Z=0.0 to Z=164.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02540", "images": ["images/Shaft_02540.png", "detail_png/Shaft_02540_length.png", "detail_png/Shaft_02540_diam.png", "detail_png/Shaft_02540_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.0 mm and length at least 160.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.0 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 124.1 mm (from Z=0.0 to Z=124.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02877", "images": ["images/Shaft_02877.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.8 mm and length at least 69.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 6.6 mm (from Z=0.0 to Z=6.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.7 mm over length 5.1 mm (from Z=0.0 to Z=58.2).\n9. Finish turn diameter Ø59.3 mm over length 10.7 mm (from Z=0.0 to Z=53.1).\n10. Finish turn diameter Ø50.8 mm over length 17.6 mm (from Z=0.0 to Z=42.4).\n11. Finish turn diameter Ø32.4 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01695", "images": ["images/Shaft_01695.png", "detail_png/Shaft_01695_length.png", "detail_png/Shaft_01695_diam.png", "detail_png/Shaft_01695_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.7 mm and length at least 115.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 9.8 mm (from Z=0.0 to Z=9.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.1 mm over length 5.1 mm (from Z=0.0 to Z=100.6).\n9. Finish turn diameter Ø64.3 mm over length 19.1 mm (from Z=0.0 to Z=95.5).\n10. Finish turn diameter Ø50.6 mm over length 31.7 mm (from Z=0.0 to Z=76.4).\n11. Finish turn diameter Ø42.4 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01741", "images": ["images/Shaft_01741.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.9 mm and length at least 195.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 49.2 mm (from Z=0.0 to Z=49.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.0 mm over length 54.1 mm (from Z=0.0 to Z=141.1).\n10. Finish turn diameter Ø30.0 mm over length 87.0 mm (from Z=0.0 to Z=87.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04140", "images": ["images/Shaft_04140.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.0 mm and length at least 287.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.2 mm over length 54.7 mm (from Z=0.0 to Z=255.8).\n10. Finish turn diameter Ø36.6 mm over length 19.9 mm (from Z=0.0 to Z=201.1).\n11. Finish turn diameter Ø30.4 mm over length 121.3 mm (from Z=0.0 to Z=181.2).\n12. Finish turn diameter Ø30.0 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03299", "images": ["images/Shaft_03299.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.2 mm and length at least 113.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.2 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.2 mm over length 12.3 mm (from Z=0.0 to Z=92.4).\n9. Finish turn diameter Ø41.0 mm over length 29.3 mm (from Z=0.0 to Z=80.1).\n10. Finish turn diameter Ø34.1 mm over length 17.7 mm (from Z=0.0 to Z=50.8).\n11. Finish turn diameter Ø30.0 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04010", "images": ["images/Shaft_04010.png", "detail_png/Shaft_04010_length.png", "detail_png/Shaft_04010_diam.png", "detail_png/Shaft_04010_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.1 mm and length at least 283.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.0 mm over length 7.8 mm (from Z=0.0 to Z=198.0).\n10. Finish turn diameter Ø61.6 mm over length 53.4 mm (from Z=0.0 to Z=190.2).\n11. Finish turn diameter Ø50.1 mm over length 36.6 mm (from Z=0.0 to Z=136.8).\n12. Finish turn diameter Ø43.4 mm over length 82.9 mm (from Z=0.0 to Z=100.2).\n13. Finish turn diameter Ø35.8 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04109", "images": ["images/Shaft_04109.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.7 mm and length at least 253.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.1 mm over length 59.6 mm (from Z=0.0 to Z=153.5).\n10. Finish turn diameter Ø63.2 mm over length 93.9 mm (from Z=0.0 to Z=93.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02245", "images": ["images/Shaft_02245.png", "detail_png/Shaft_02245_length.png", "detail_png/Shaft_02245_diam.png", "detail_png/Shaft_02245_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.9 mm and length at least 269.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 101.7 mm (from Z=0.0 to Z=101.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 65.5 mm (from Z=0.0 to Z=163.2).\n10. Finish turn diameter Ø30.0 mm over length 97.7 mm (from Z=0.0 to Z=97.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01048", "images": ["images/Shaft_01048.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.5 mm and length at least 98.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 38.5 mm (from Z=0.0 to Z=78.4).\n9. Finish turn diameter Ø30.0 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01566", "images": ["images/Shaft_01566.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.0 mm and length at least 292.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 116.6 mm (from Z=0.0 to Z=116.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 80.7 mm (from Z=0.0 to Z=170.6).\n10. Finish turn diameter Ø30.0 mm over length 89.9 mm (from Z=0.0 to Z=89.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03075", "images": ["images/Shaft_03075.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.8 mm and length at least 234.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.4 mm over length 72.7 mm (from Z=0.0 to Z=202.8).\n10. Finish turn diameter Ø30.0 mm over length 130.1 mm (from Z=0.0 to Z=130.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02469", "images": ["images/Shaft_02469.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.3 mm and length at least 155.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.1 mm over length 31.2 mm (from Z=0.0 to Z=123.8).\n9. Finish turn diameter Ø61.8 mm over length 46.9 mm (from Z=0.0 to Z=92.6).\n10. Finish turn diameter Ø47.6 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00996", "images": ["images/Shaft_00996.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.9 mm and length at least 289.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 273.2 mm (from Z=0.0 to Z=273.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03667", "images": ["images/Shaft_03667.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 300.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 179.0 mm (from Z=0.0 to Z=179.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.5 mm over length 116.6 mm (from Z=0.0 to Z=116.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00253", "images": ["images/Shaft_00253.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.7 mm and length at least 115.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.8 mm over length 43.8 mm (from Z=0.0 to Z=74.5).\n9. Finish turn diameter Ø30.0 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02057", "images": ["images/Shaft_02057.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 269.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 240.8 mm (from Z=0.0 to Z=240.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02919", "images": ["images/Shaft_02919.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.0 mm and length at least 172.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 58.5 mm (from Z=0.0 to Z=158.1).\n9. Finish turn diameter Ø34.0 mm over length 70.1 mm (from Z=0.0 to Z=99.6).\n10. Finish turn diameter Ø30.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01352", "images": ["images/Shaft_01352.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.3 mm and length at least 272.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 239.8 mm (from Z=0.0 to Z=239.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03094", "images": ["images/Shaft_03094.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 160.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 127.6 mm (from Z=0.0 to Z=127.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.7 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04753", "images": ["images/Shaft_04753.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.1 mm and length at least 316.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 132.0 mm (from Z=0.0 to Z=132.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 179.7 mm (from Z=0.0 to Z=179.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03367", "images": ["images/Shaft_03367.png", "detail_png/Shaft_03367_length.png", "detail_png/Shaft_03367_diam.png", "detail_png/Shaft_03367_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.6 mm and length at least 235.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 80.5 mm (from Z=0.0 to Z=80.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.7 mm over length 87.1 mm (from Z=0.0 to Z=150.4).\n10. Finish turn diameter Ø30.0 mm over length 63.3 mm (from Z=0.0 to Z=63.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04178", "images": ["images/Shaft_04178.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.7 mm and length at least 129.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 18.5 mm (from Z=0.0 to Z=18.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.2 mm over length 44.2 mm (from Z=0.0 to Z=106.0).\n9. Finish turn diameter Ø30.0 mm over length 61.8 mm (from Z=0.0 to Z=61.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01665", "images": ["images/Shaft_01665.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.2 mm and length at least 212.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 28.5 mm (from Z=0.0 to Z=148.7).\n10. Finish turn diameter Ø54.9 mm over length 9.5 mm (from Z=0.0 to Z=120.2).\n11. Finish turn diameter Ø36.2 mm over length 67.6 mm (from Z=0.0 to Z=110.7).\n12. Finish turn diameter Ø30.0 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02658", "images": ["images/Shaft_02658.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 308.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.6 mm (from Z=0.0 to Z=202.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 100.7 mm (from Z=0.0 to Z=100.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03376", "images": ["images/Shaft_03376.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 249.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 173.9 mm (from Z=0.0 to Z=173.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 70.6 mm (from Z=0.0 to Z=70.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01205", "images": ["images/Shaft_01205.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.9 mm and length at least 115.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.9 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.6 mm over length 9.4 mm (from Z=0.0 to Z=92.0).\n9. Finish turn diameter Ø30.0 mm over length 82.6 mm (from Z=0.0 to Z=82.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04206", "images": ["images/Shaft_04206.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.0 mm and length at least 121.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.4 mm over length 70.5 mm (from Z=0.0 to Z=97.3).\n9. Finish turn diameter Ø33.2 mm over length 26.8 mm (from Z=0.0 to Z=26.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03563", "images": ["images/Shaft_03563.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.4 mm and length at least 76.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.4 mm over length 17.1 mm (from Z=0.0 to Z=36.8).\n9. Finish turn diameter Ø30.0 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02539", "images": ["images/Shaft_02539.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.2 mm and length at least 282.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.3 mm over length 135.8 mm (from Z=0.0 to Z=193.2).\n10. Finish turn diameter Ø31.0 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02769", "images": ["images/Shaft_02769.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.2 mm and length at least 74.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 52.9 mm (from Z=0.0 to Z=52.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01915", "images": ["images/Shaft_01915.png", "detail_png/Shaft_01915_length.png", "detail_png/Shaft_01915_diam.png", "detail_png/Shaft_01915_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 264.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 225.4 mm (from Z=0.0 to Z=225.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.4 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04913", "images": ["images/Shaft_04913.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.9 mm and length at least 220.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.0 mm over length 41.1 mm (from Z=0.0 to Z=180.2).\n10. Finish turn diameter Ø30.0 mm over length 139.1 mm (from Z=0.0 to Z=139.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04983", "images": ["images/Shaft_04983.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.0 mm and length at least 232.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.0 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 178.8 mm (from Z=0.0 to Z=178.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03783", "images": ["images/Shaft_03783.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 294.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 238.9 mm (from Z=0.0 to Z=238.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01757", "images": ["images/Shaft_01757.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.6 mm and length at least 118.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.2 mm over length 35.3 mm (from Z=0.0 to Z=87.4).\n9. Finish turn diameter Ø38.4 mm over length 12.6 mm (from Z=0.0 to Z=52.1).\n10. Finish turn diameter Ø30.0 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01498", "images": ["images/Shaft_01498.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.7 mm and length at least 224.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 63.7 mm (from Z=0.0 to Z=63.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.8 mm over length 76.7 mm (from Z=0.0 to Z=155.8).\n10. Finish turn diameter Ø53.0 mm over length 49.2 mm (from Z=0.0 to Z=79.1).\n11. Finish turn diameter Ø39.3 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01254", "images": ["images/Shaft_01254.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.3 mm and length at least 246.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.3 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.3 mm over length 132.7 mm (from Z=0.0 to Z=168.5).\n10. Finish turn diameter Ø46.8 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00960", "images": ["images/Shaft_00960.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.0 mm and length at least 315.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 61.9 mm (from Z=0.0 to Z=61.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 91.3 mm (from Z=0.0 to Z=248.7).\n10. Finish turn diameter Ø48.5 mm over length 72.0 mm (from Z=0.0 to Z=157.4).\n11. Finish turn diameter Ø30.0 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00881", "images": ["images/Shaft_00881.png", "detail_png/Shaft_00881_length.png", "detail_png/Shaft_00881_diam.png", "detail_png/Shaft_00881_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 289.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 220.2 mm (from Z=0.0 to Z=220.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.7 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01674", "images": ["images/Shaft_01674.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 283.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 263.9 mm (from Z=0.0 to Z=263.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02322", "images": ["images/Shaft_02322.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.6 mm and length at least 197.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.6 mm over length 93.2 mm (from Z=0.0 to Z=183.4).\n10. Finish turn diameter Ø43.2 mm over length 33.9 mm (from Z=0.0 to Z=90.2).\n11. Finish turn diameter Ø35.3 mm over length 46.1 mm (from Z=0.0 to Z=56.3).\n12. Finish turn diameter Ø30.0 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01516", "images": ["images/Shaft_01516.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.0 mm and length at least 195.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.9 mm over length 20.3 mm (from Z=0.0 to Z=172.5).\n10. Finish turn diameter Ø36.6 mm over length 45.6 mm (from Z=0.0 to Z=152.2).\n11. Finish turn diameter Ø32.6 mm over length 76.4 mm (from Z=0.0 to Z=106.6).\n12. Finish turn diameter Ø30.0 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00760", "images": ["images/Shaft_00760.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.5 mm and length at least 182.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.7 mm (from Z=0.0 to Z=126.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04788", "images": ["images/Shaft_04788.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.1 mm and length at least 171.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04557", "images": ["images/Shaft_04557.png", "detail_png/Shaft_04557_length.png", "detail_png/Shaft_04557_diam.png", "detail_png/Shaft_04557_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.5 mm and length at least 160.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 142.0 mm (from Z=0.0 to Z=142.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04515", "images": ["images/Shaft_04515.png", "detail_png/Shaft_04515_length.png", "detail_png/Shaft_04515_diam.png", "detail_png/Shaft_04515_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.3 mm and length at least 184.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.5 mm over length 82.8 mm (from Z=0.0 to Z=128.7).\n9. Finish turn diameter Ø43.9 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02546", "images": ["images/Shaft_02546.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.2 mm and length at least 213.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.4 mm (from Z=0.0 to Z=164.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04159", "images": ["images/Shaft_04159.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.8 mm and length at least 93.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03255", "images": ["images/Shaft_03255.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 242.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 219.5 mm (from Z=0.0 to Z=219.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00252", "images": ["images/Shaft_00252.png", "detail_png/Shaft_00252_length.png", "detail_png/Shaft_00252_diam.png", "detail_png/Shaft_00252_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.2 mm and length at least 137.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.3 mm over length 13.9 mm (from Z=0.0 to Z=113.4).\n9. Finish turn diameter Ø36.0 mm over length 21.0 mm (from Z=0.0 to Z=99.5).\n10. Finish turn diameter Ø31.8 mm over length 13.9 mm (from Z=0.0 to Z=78.5).\n11. Finish turn diameter Ø30.0 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04863", "images": ["images/Shaft_04863.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.7 mm and length at least 241.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.4 mm (from Z=0.0 to Z=224.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04655", "images": ["images/Shaft_04655.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.8 mm and length at least 166.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.5 mm over length 69.3 mm (from Z=0.0 to Z=122.4).\n9. Finish turn diameter Ø40.6 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04331", "images": ["images/Shaft_04331.png", "detail_png/Shaft_04331_length.png", "detail_png/Shaft_04331_diam.png", "detail_png/Shaft_04331_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 127.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 109.7 mm (from Z=0.0 to Z=109.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.4 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01578", "images": ["images/Shaft_01578.png", "detail_png/Shaft_01578_length.png", "detail_png/Shaft_01578_diam.png", "detail_png/Shaft_01578_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.4 mm and length at least 261.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.5 mm over length 81.2 mm (from Z=0.0 to Z=233.4).\n10. Finish turn diameter Ø30.0 mm over length 152.2 mm (from Z=0.0 to Z=152.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00294", "images": ["images/Shaft_00294.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.7 mm and length at least 308.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 87.7 mm (from Z=0.0 to Z=87.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.6 mm over length 39.7 mm (from Z=0.0 to Z=215.4).\n10. Finish turn diameter Ø46.3 mm over length 58.6 mm (from Z=0.0 to Z=175.7).\n11. Finish turn diameter Ø37.7 mm over length 38.0 mm (from Z=0.0 to Z=117.1).\n12. Finish turn diameter Ø30.0 mm over length 79.1 mm (from Z=0.0 to Z=79.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01374", "images": ["images/Shaft_01374.png", "detail_png/Shaft_01374_length.png", "detail_png/Shaft_01374_diam.png", "detail_png/Shaft_01374_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 307.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 215.0 mm (from Z=0.0 to Z=215.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.9 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01051", "images": ["images/Shaft_01051.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.7 mm and length at least 100.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.7 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.5 mm over length 26.4 mm (from Z=0.0 to Z=54.4).\n9. Finish turn diameter Ø32.9 mm over length 17.4 mm (from Z=0.0 to Z=28.0).\n10. Finish turn diameter Ø30.0 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03292", "images": ["images/Shaft_03292.png", "detail_png/Shaft_03292_length.png", "detail_png/Shaft_03292_diam.png", "detail_png/Shaft_03292_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.0 mm and length at least 305.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 86.9 mm (from Z=0.0 to Z=86.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.6 mm over length 97.9 mm (from Z=0.0 to Z=213.5).\n10. Finish turn diameter Ø30.0 mm over length 115.6 mm (from Z=0.0 to Z=115.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02597", "images": ["images/Shaft_02597.png", "detail_png/Shaft_02597_length.png", "detail_png/Shaft_02597_diam.png", "detail_png/Shaft_02597_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.5 mm and length at least 108.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03473", "images": ["images/Shaft_03473.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.2 mm and length at least 148.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 114.3 mm (from Z=0.0 to Z=114.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02157", "images": ["images/Shaft_02157.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.0 mm and length at least 145.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.0 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.0 mm over length 8.3 mm (from Z=0.0 to Z=125.0).\n9. Finish turn diameter Ø42.8 mm over length 42.3 mm (from Z=0.0 to Z=116.7).\n10. Finish turn diameter Ø30.0 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02226", "images": ["images/Shaft_02226.png", "detail_png/Shaft_02226_length.png", "detail_png/Shaft_02226_diam.png", "detail_png/Shaft_02226_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.1 mm and length at least 188.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.5 mm over length 30.8 mm (from Z=0.0 to Z=165.7).\n9. Finish turn diameter Ø46.9 mm over length 39.1 mm (from Z=0.0 to Z=134.9).\n10. Finish turn diameter Ø40.3 mm over length 48.4 mm (from Z=0.0 to Z=95.8).\n11. Finish turn diameter Ø33.1 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03717", "images": ["images/Shaft_03717.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.1 mm and length at least 274.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.3 mm over length 27.4 mm (from Z=0.0 to Z=217.0).\n10. Finish turn diameter Ø30.0 mm over length 189.6 mm (from Z=0.0 to Z=189.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02624", "images": ["images/Shaft_02624.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.0 mm and length at least 242.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.2 mm over length 41.8 mm (from Z=0.0 to Z=184.3).\n10. Finish turn diameter Ø35.9 mm over length 30.3 mm (from Z=0.0 to Z=142.5).\n11. Finish turn diameter Ø30.0 mm over length 112.2 mm (from Z=0.0 to Z=112.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04972", "images": ["images/Shaft_04972.png", "detail_png/Shaft_04972_length.png", "detail_png/Shaft_04972_diam.png", "detail_png/Shaft_04972_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.4 mm and length at least 208.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.1 mm over length 53.5 mm (from Z=0.0 to Z=183.0).\n10. Finish turn diameter Ø30.0 mm over length 129.5 mm (from Z=0.0 to Z=129.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02920", "images": ["images/Shaft_02920.png", "detail_png/Shaft_02920_length.png", "detail_png/Shaft_02920_diam.png", "detail_png/Shaft_02920_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.8 mm and length at least 138.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 116.0 mm (from Z=0.0 to Z=116.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03850", "images": ["images/Shaft_03850.png", "detail_png/Shaft_03850_length.png", "detail_png/Shaft_03850_diam.png", "detail_png/Shaft_03850_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.2 mm and length at least 124.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03385", "images": ["images/Shaft_03385.png", "detail_png/Shaft_03385_length.png", "detail_png/Shaft_03385_diam.png", "detail_png/Shaft_03385_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.8 mm and length at least 148.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.0 mm over length 29.3 mm (from Z=0.0 to Z=132.0).\n9. Finish turn diameter Ø42.5 mm over length 33.5 mm (from Z=0.0 to Z=102.7).\n10. Finish turn diameter Ø30.0 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01396", "images": ["images/Shaft_01396.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.4 mm and length at least 189.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.9 mm over length 18.2 mm (from Z=0.0 to Z=105.7).\n9. Finish turn diameter Ø53.8 mm over length 87.5 mm (from Z=0.0 to Z=87.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03242", "images": ["images/Shaft_03242.png", "detail_png/Shaft_03242_length.png", "detail_png/Shaft_03242_diam.png", "detail_png/Shaft_03242_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.1 mm and length at least 96.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 6.8 mm (from Z=0.0 to Z=6.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.0 mm over length 33.2 mm (from Z=0.0 to Z=84.5).\n9. Finish turn diameter Ø34.6 mm over length 34.9 mm (from Z=0.0 to Z=51.3).\n10. Finish turn diameter Ø30.0 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00219", "images": ["images/Shaft_00219.png", "detail_png/Shaft_00219_length.png", "detail_png/Shaft_00219_diam.png", "detail_png/Shaft_00219_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.0 mm and length at least 316.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 291.5 mm (from Z=0.0 to Z=291.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00141", "images": ["images/Shaft_00141.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.2 mm and length at least 197.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.7 mm over length 63.4 mm (from Z=0.0 to Z=126.5).\n10. Finish turn diameter Ø44.4 mm over length 41.6 mm (from Z=0.0 to Z=63.1).\n11. Finish turn diameter Ø40.4 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01369", "images": ["images/Shaft_01369.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.4 mm and length at least 126.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 96.7 mm (from Z=0.0 to Z=96.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02790", "images": ["images/Shaft_02790.png", "detail_png/Shaft_02790_length.png", "detail_png/Shaft_02790_diam.png", "detail_png/Shaft_02790_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.1 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.1 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 215.8 mm (from Z=0.0 to Z=215.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02473", "images": ["images/Shaft_02473.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.5 mm and length at least 100.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.2 mm over length 26.2 mm (from Z=0.0 to Z=78.9).\n9. Finish turn diameter Ø48.5 mm over length 25.6 mm (from Z=0.0 to Z=52.7).\n10. Finish turn diameter Ø34.7 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00181", "images": ["images/Shaft_00181.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.1 mm and length at least 257.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.1 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 55.4 mm (from Z=0.0 to Z=168.3).\n10. Finish turn diameter Ø30.0 mm over length 112.9 mm (from Z=0.0 to Z=112.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03718", "images": ["images/Shaft_03718.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 85.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.1 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00093", "images": ["images/Shaft_00093.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.5 mm and length at least 116.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.7 mm over length 28.1 mm (from Z=0.0 to Z=106.7).\n9. Finish turn diameter Ø52.3 mm over length 24.8 mm (from Z=0.0 to Z=78.6).\n10. Finish turn diameter Ø43.4 mm over length 5.0 mm (from Z=0.0 to Z=53.8).\n11. Finish turn diameter Ø35.2 mm over length 24.4 mm (from Z=0.0 to Z=48.8).\n12. Finish turn diameter Ø30.0 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01291", "images": ["images/Shaft_01291.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.4 mm and length at least 82.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.4 mm over length 6.7 mm (from Z=0.0 to Z=6.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.2 mm over length 17.5 mm (from Z=0.0 to Z=70.4).\n9. Finish turn diameter Ø48.1 mm over length 17.9 mm (from Z=0.0 to Z=52.9).\n10. Finish turn diameter Ø40.3 mm over length 5.0 mm (from Z=0.0 to Z=35.0).\n11. Finish turn diameter Ø30.0 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02144", "images": ["images/Shaft_02144.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.8 mm and length at least 266.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.6 mm over length 63.6 mm (from Z=0.0 to Z=172.5).\n10. Finish turn diameter Ø30.0 mm over length 108.9 mm (from Z=0.0 to Z=108.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04998", "images": ["images/Shaft_04998.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.7 mm and length at least 117.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00414", "images": ["images/Shaft_00414.png", "detail_png/Shaft_00414_length.png", "detail_png/Shaft_00414_diam.png", "detail_png/Shaft_00414_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.3 mm and length at least 88.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.3 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.3 mm over length 24.3 mm (from Z=0.0 to Z=54.1).\n9. Finish turn diameter Ø34.2 mm over length 19.0 mm (from Z=0.0 to Z=29.8).\n10. Finish turn diameter Ø30.0 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02208", "images": ["images/Shaft_02208.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.3 mm and length at least 268.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 80.9 mm (from Z=0.0 to Z=80.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.4 mm over length 95.2 mm (from Z=0.0 to Z=183.0).\n10. Finish turn diameter Ø41.9 mm over length 15.1 mm (from Z=0.0 to Z=87.8).\n11. Finish turn diameter Ø30.1 mm over length 39.4 mm (from Z=0.0 to Z=72.7).\n12. Finish turn diameter Ø30.0 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00539", "images": ["images/Shaft_00539.png", "detail_png/Shaft_00539_length.png", "detail_png/Shaft_00539_diam.png", "detail_png/Shaft_00539_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 165.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 106.0 mm (from Z=0.0 to Z=106.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.5 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01553", "images": ["images/Shaft_01553.png", "detail_png/Shaft_01553_length.png", "detail_png/Shaft_01553_diam.png", "detail_png/Shaft_01553_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.7 mm and length at least 264.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 122.5 mm (from Z=0.0 to Z=122.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.7 mm (from Z=0.0 to Z=136.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01526", "images": ["images/Shaft_01526.png", "detail_png/Shaft_01526_length.png", "detail_png/Shaft_01526_diam.png", "detail_png/Shaft_01526_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.1 mm and length at least 301.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 107.5 mm (from Z=0.0 to Z=107.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.8 mm over length 90.4 mm (from Z=0.0 to Z=188.7).\n10. Finish turn diameter Ø52.1 mm over length 98.3 mm (from Z=0.0 to Z=98.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04064", "images": ["images/Shaft_04064.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.1 mm and length at least 288.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.0 mm over length 75.6 mm (from Z=0.0 to Z=252.4).\n10. Finish turn diameter Ø30.0 mm over length 176.8 mm (from Z=0.0 to Z=176.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03595", "images": ["images/Shaft_03595.png", "detail_png/Shaft_03595_length.png", "detail_png/Shaft_03595_diam.png", "detail_png/Shaft_03595_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.0 mm and length at least 271.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.4 mm over length 11.9 mm (from Z=0.0 to Z=247.1).\n10. Finish turn diameter Ø30.0 mm over length 235.2 mm (from Z=0.0 to Z=235.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01169", "images": ["images/Shaft_01169.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.5 mm and length at least 196.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.3 mm over length 44.8 mm (from Z=0.0 to Z=148.1).\n10. Finish turn diameter Ø34.5 mm over length 53.5 mm (from Z=0.0 to Z=103.3).\n11. Finish turn diameter Ø30.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01536", "images": ["images/Shaft_01536.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.8 mm and length at least 275.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.8 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.4 mm over length 129.4 mm (from Z=0.0 to Z=242.9).\n10. Finish turn diameter Ø42.3 mm over length 14.3 mm (from Z=0.0 to Z=113.5).\n11. Finish turn diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00622", "images": ["images/Shaft_00622.png", "detail_png/Shaft_00622_length.png", "detail_png/Shaft_00622_diam.png", "detail_png/Shaft_00622_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.3 mm and length at least 307.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 101.8 mm (from Z=0.0 to Z=250.5).\n10. Finish turn diameter Ø41.8 mm over length 66.6 mm (from Z=0.0 to Z=148.7).\n11. Finish turn diameter Ø30.0 mm over length 82.1 mm (from Z=0.0 to Z=82.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01937", "images": ["images/Shaft_01937.png", "detail_png/Shaft_01937_length.png", "detail_png/Shaft_01937_diam.png", "detail_png/Shaft_01937_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.7 mm and length at least 258.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 30.4 mm (from Z=0.0 to Z=179.4).\n10. Finish turn diameter Ø30.0 mm over length 149.0 mm (from Z=0.0 to Z=149.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02767", "images": ["images/Shaft_02767.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.6 mm and length at least 225.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.3 mm over length 63.6 mm (from Z=0.0 to Z=154.0).\n10. Finish turn diameter Ø33.2 mm over length 14.5 mm (from Z=0.0 to Z=90.4).\n11. Finish turn diameter Ø30.0 mm over length 75.9 mm (from Z=0.0 to Z=75.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02608", "images": ["images/Shaft_02608.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.1 mm and length at least 71.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.1 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.4 mm over length 10.4 mm (from Z=0.0 to Z=53.7).\n9. Finish turn diameter Ø30.0 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00064", "images": ["images/Shaft_00064.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.2 mm and length at least 210.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.7 mm over length 27.9 mm (from Z=0.0 to Z=169.9).\n10. Finish turn diameter Ø31.4 mm over length 76.9 mm (from Z=0.0 to Z=142.0).\n11. Finish turn diameter Ø30.0 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03074", "images": ["images/Shaft_03074.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 202.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 166.9 mm (from Z=0.0 to Z=166.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.9 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01047", "images": ["images/Shaft_01047.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.3 mm and length at least 87.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.9 mm over length 6.3 mm (from Z=0.0 to Z=67.4).\n9. Finish turn diameter Ø45.9 mm over length 49.1 mm (from Z=0.0 to Z=61.1).\n10. Finish turn diameter Ø32.0 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04867", "images": ["images/Shaft_04867.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.8 mm and length at least 255.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 49.1 mm (from Z=0.0 to Z=167.0).\n10. Finish turn diameter Ø30.0 mm over length 117.9 mm (from Z=0.0 to Z=117.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04244", "images": ["images/Shaft_04244.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.1 mm and length at least 172.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.8 mm (from Z=0.0 to Z=149.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04729", "images": ["images/Shaft_04729.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 258.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 132.9 mm (from Z=0.0 to Z=132.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.5 mm over length 120.5 mm (from Z=0.0 to Z=120.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01974", "images": ["images/Shaft_01974.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.9 mm and length at least 324.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.7 mm over length 54.5 mm (from Z=0.0 to Z=301.8).\n10. Finish turn diameter Ø68.4 mm over length 47.3 mm (from Z=0.0 to Z=247.3).\n11. Finish turn diameter Ø58.6 mm over length 65.2 mm (from Z=0.0 to Z=200.0).\n12. Finish turn diameter Ø46.4 mm over length 78.4 mm (from Z=0.0 to Z=134.8).\n13. Finish turn diameter Ø31.8 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03092", "images": ["images/Shaft_03092.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.3 mm and length at least 278.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.3 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.2 mm over length 39.7 mm (from Z=0.0 to Z=243.9).\n10. Finish turn diameter Ø42.4 mm over length 53.0 mm (from Z=0.0 to Z=204.2).\n11. Finish turn diameter Ø39.0 mm over length 76.5 mm (from Z=0.0 to Z=151.2).\n12. Finish turn diameter Ø32.5 mm over length 12.9 mm (from Z=0.0 to Z=74.7).\n13. Finish turn diameter Ø30.0 mm over length 61.8 mm (from Z=0.0 to Z=61.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01405", "images": ["images/Shaft_01405.png", "detail_png/Shaft_01405_length.png", "detail_png/Shaft_01405_diam.png", "detail_png/Shaft_01405_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.4 mm and length at least 205.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 163.0 mm (from Z=0.0 to Z=163.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02949", "images": ["images/Shaft_02949.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.3 mm and length at least 90.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00244", "images": ["images/Shaft_00244.png", "detail_png/Shaft_00244_length.png", "detail_png/Shaft_00244_diam.png", "detail_png/Shaft_00244_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.7 mm and length at least 66.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.6 mm over length 8.8 mm (from Z=0.0 to Z=48.8).\n9. Finish turn diameter Ø39.8 mm over length 15.3 mm (from Z=0.0 to Z=40.0).\n10. Finish turn diameter Ø34.4 mm over length 7.4 mm (from Z=0.0 to Z=24.7).\n11. Finish turn diameter Ø30.0 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02463", "images": ["images/Shaft_02463.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.4 mm and length at least 322.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.4 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 270.7 mm (from Z=0.0 to Z=270.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04059", "images": ["images/Shaft_04059.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.7 mm and length at least 160.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 12.8 mm (from Z=0.0 to Z=131.9).\n9. Finish turn diameter Ø52.8 mm over length 30.1 mm (from Z=0.0 to Z=119.1).\n10. Finish turn diameter Ø33.5 mm over length 28.1 mm (from Z=0.0 to Z=89.0).\n11. Finish turn diameter Ø30.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03480", "images": ["images/Shaft_03480.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.2 mm and length at least 260.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 89.5 mm (from Z=0.0 to Z=89.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.4 mm over length 63.7 mm (from Z=0.0 to Z=165.5).\n10. Finish turn diameter Ø46.6 mm over length 101.8 mm (from Z=0.0 to Z=101.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02503", "images": ["images/Shaft_02503.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 215.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.6 mm (from Z=0.0 to Z=168.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01487", "images": ["images/Shaft_01487.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.7 mm and length at least 288.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.7 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.5 mm over length 84.7 mm (from Z=0.0 to Z=258.9).\n10. Finish turn diameter Ø30.0 mm over length 174.2 mm (from Z=0.0 to Z=174.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04544", "images": ["images/Shaft_04544.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.6 mm and length at least 116.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.2 mm over length 41.9 mm (from Z=0.0 to Z=106.1).\n9. Finish turn diameter Ø38.9 mm over length 8.4 mm (from Z=0.0 to Z=64.2).\n10. Finish turn diameter Ø35.1 mm over length 24.9 mm (from Z=0.0 to Z=55.8).\n11. Finish turn diameter Ø30.0 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01035", "images": ["images/Shaft_01035.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.4 mm and length at least 295.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 84.0 mm (from Z=0.0 to Z=84.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.1 mm over length 68.4 mm (from Z=0.0 to Z=206.9).\n10. Finish turn diameter Ø30.0 mm over length 138.5 mm (from Z=0.0 to Z=138.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01715", "images": ["images/Shaft_01715.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 87.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02251", "images": ["images/Shaft_02251.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.2 mm and length at least 310.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 120.5 mm (from Z=0.0 to Z=120.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 185.0 mm (from Z=0.0 to Z=185.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00644", "images": ["images/Shaft_00644.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.9 mm and length at least 291.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 74.2 mm (from Z=0.0 to Z=74.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 34.3 mm (from Z=0.0 to Z=212.0).\n10. Finish turn diameter Ø48.3 mm over length 61.4 mm (from Z=0.0 to Z=177.7).\n11. Finish turn diameter Ø30.0 mm over length 116.3 mm (from Z=0.0 to Z=116.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04528", "images": ["images/Shaft_04528.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 216.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 157.2 mm (from Z=0.0 to Z=157.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02253", "images": ["images/Shaft_02253.png", "detail_png/Shaft_02253_length.png", "detail_png/Shaft_02253_diam.png", "detail_png/Shaft_02253_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.6 mm and length at least 257.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.9 mm over length 99.6 mm (from Z=0.0 to Z=200.7).\n10. Finish turn diameter Ø39.2 mm over length 101.1 mm (from Z=0.0 to Z=101.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01149", "images": ["images/Shaft_01149.png", "detail_png/Shaft_01149_length.png", "detail_png/Shaft_01149_diam.png", "detail_png/Shaft_01149_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.0 mm and length at least 197.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.7 mm over length 48.7 mm (from Z=0.0 to Z=146.1).\n10. Finish turn diameter Ø47.4 mm over length 17.8 mm (from Z=0.0 to Z=97.4).\n11. Finish turn diameter Ø30.0 mm over length 79.6 mm (from Z=0.0 to Z=79.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02300", "images": ["images/Shaft_02300.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.5 mm and length at least 191.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.5 mm over length 25.9 mm (from Z=0.0 to Z=157.6).\n9. Finish turn diameter Ø60.4 mm over length 9.3 mm (from Z=0.0 to Z=131.7).\n10. Finish turn diameter Ø55.0 mm over length 49.4 mm (from Z=0.0 to Z=122.4).\n11. Finish turn diameter Ø42.1 mm over length 37.0 mm (from Z=0.0 to Z=73.0).\n12. Finish turn diameter Ø30.0 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03547", "images": ["images/Shaft_03547.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.3 mm and length at least 177.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 18.1 mm (from Z=0.0 to Z=119.6).\n10. Finish turn diameter Ø30.0 mm over length 101.5 mm (from Z=0.0 to Z=101.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03615", "images": ["images/Shaft_03615.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.6 mm and length at least 238.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 118.3 mm (from Z=0.0 to Z=118.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.7 mm over length 99.6 mm (from Z=0.0 to Z=115.5).\n10. Finish turn diameter Ø33.9 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03080", "images": ["images/Shaft_03080.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.6 mm and length at least 144.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.0 mm over length 34.4 mm (from Z=0.0 to Z=103.2).\n9. Finish turn diameter Ø38.5 mm over length 27.5 mm (from Z=0.0 to Z=68.8).\n10. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03070", "images": ["images/Shaft_03070.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.2 mm and length at least 162.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 130.2 mm (from Z=0.0 to Z=130.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00144", "images": ["images/Shaft_00144.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.6 mm and length at least 123.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 101.9 mm (from Z=0.0 to Z=101.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03970", "images": ["images/Shaft_03970.png", "detail_png/Shaft_03970_length.png", "detail_png/Shaft_03970_diam.png", "detail_png/Shaft_03970_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 90.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.0 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01340", "images": ["images/Shaft_01340.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.2 mm and length at least 171.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.4 mm over length 47.7 mm (from Z=0.0 to Z=121.7).\n9. Finish turn diameter Ø53.8 mm over length 46.8 mm (from Z=0.0 to Z=74.0).\n10. Finish turn diameter Ø42.8 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00178", "images": ["images/Shaft_00178.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 94.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.8 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03849", "images": ["images/Shaft_03849.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.0 mm and length at least 104.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.1 mm over length 25.3 mm (from Z=0.0 to Z=71.1).\n9. Finish turn diameter Ø39.9 mm over length 30.0 mm (from Z=0.0 to Z=45.8).\n10. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04033", "images": ["images/Shaft_04033.png", "detail_png/Shaft_04033_length.png", "detail_png/Shaft_04033_diam.png", "detail_png/Shaft_04033_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 289.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 228.8 mm (from Z=0.0 to Z=228.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.3 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01532", "images": ["images/Shaft_01532.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.6 mm and length at least 153.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.5 mm (from Z=0.0 to Z=99.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00700", "images": ["images/Shaft_00700.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.7 mm and length at least 324.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 61.9 mm (from Z=0.0 to Z=61.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.2 mm over length 38.8 mm (from Z=0.0 to Z=257.3).\n10. Finish turn diameter Ø51.1 mm over length 65.9 mm (from Z=0.0 to Z=218.5).\n11. Finish turn diameter Ø34.9 mm over length 63.6 mm (from Z=0.0 to Z=152.6).\n12. Finish turn diameter Ø30.0 mm over length 89.0 mm (from Z=0.0 to Z=89.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01055", "images": ["images/Shaft_01055.png", "detail_png/Shaft_01055_length.png", "detail_png/Shaft_01055_diam.png", "detail_png/Shaft_01055_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.2 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.2 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.9 mm over length 20.9 mm (from Z=0.0 to Z=105.7).\n9. Finish turn diameter Ø49.7 mm over length 30.2 mm (from Z=0.0 to Z=84.8).\n10. Finish turn diameter Ø31.1 mm over length 22.7 mm (from Z=0.0 to Z=54.6).\n11. Finish turn diameter Ø30.0 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02127", "images": ["images/Shaft_02127.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 293.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 183.6 mm (from Z=0.0 to Z=183.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00666", "images": ["images/Shaft_00666.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.3 mm and length at least 272.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 16.9 mm (from Z=0.0 to Z=183.2).\n10. Finish turn diameter Ø48.0 mm over length 18.0 mm (from Z=0.0 to Z=166.3).\n11. Finish turn diameter Ø34.0 mm over length 42.5 mm (from Z=0.0 to Z=148.3).\n12. Finish turn diameter Ø30.0 mm over length 105.8 mm (from Z=0.0 to Z=105.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01675", "images": ["images/Shaft_01675.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.9 mm and length at least 212.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.7 mm over length 88.1 mm (from Z=0.0 to Z=185.2).\n10. Finish turn diameter Ø53.6 mm over length 60.1 mm (from Z=0.0 to Z=97.1).\n11. Finish turn diameter Ø41.4 mm over length 12.4 mm (from Z=0.0 to Z=37.0).\n12. Finish turn diameter Ø36.9 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00269", "images": ["images/Shaft_00269.png", "detail_png/Shaft_00269_length.png", "detail_png/Shaft_00269_diam.png", "detail_png/Shaft_00269_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.4 mm and length at least 242.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.4 mm over length 94.6 mm (from Z=0.0 to Z=94.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.9 mm over length 52.4 mm (from Z=0.0 to Z=142.9).\n10. Finish turn diameter Ø41.9 mm over length 90.5 mm (from Z=0.0 to Z=90.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03955", "images": ["images/Shaft_03955.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.9 mm and length at least 99.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02410", "images": ["images/Shaft_02410.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.8 mm and length at least 250.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 87.6 mm (from Z=0.0 to Z=87.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.3 mm over length 72.0 mm (from Z=0.0 to Z=157.6).\n10. Finish turn diameter Ø30.0 mm over length 85.6 mm (from Z=0.0 to Z=85.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04458", "images": ["images/Shaft_04458.png", "detail_png/Shaft_04458_length.png", "detail_png/Shaft_04458_diam.png", "detail_png/Shaft_04458_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.0 mm and length at least 185.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.4 mm over length 8.0 mm (from Z=0.0 to Z=146.7).\n10. Finish turn diameter Ø49.3 mm over length 42.3 mm (from Z=0.0 to Z=138.7).\n11. Finish turn diameter Ø30.0 mm over length 96.4 mm (from Z=0.0 to Z=96.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04698", "images": ["images/Shaft_04698.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.6 mm and length at least 154.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.4 mm over length 50.7 mm (from Z=0.0 to Z=87.4).\n9. Finish turn diameter Ø30.0 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01722", "images": ["images/Shaft_01722.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.7 mm and length at least 180.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.3 mm over length 26.5 mm (from Z=0.0 to Z=134.8).\n10. Finish turn diameter Ø30.0 mm over length 108.3 mm (from Z=0.0 to Z=108.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03161", "images": ["images/Shaft_03161.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 69.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 42.9 mm (from Z=0.0 to Z=42.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.4 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04862", "images": ["images/Shaft_04862.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.7 mm and length at least 254.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.3 mm over length 7.6 mm (from Z=0.0 to Z=182.5).\n10. Finish turn diameter Ø33.3 mm over length 34.8 mm (from Z=0.0 to Z=174.9).\n11. Finish turn diameter Ø30.0 mm over length 140.1 mm (from Z=0.0 to Z=140.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04778", "images": ["images/Shaft_04778.png", "detail_png/Shaft_04778_length.png", "detail_png/Shaft_04778_diam.png", "detail_png/Shaft_04778_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.5 mm and length at least 196.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.6 mm over length 48.2 mm (from Z=0.0 to Z=143.5).\n10. Finish turn diameter Ø40.2 mm over length 15.3 mm (from Z=0.0 to Z=95.3).\n11. Finish turn diameter Ø34.0 mm over length 57.5 mm (from Z=0.0 to Z=80.0).\n12. Finish turn diameter Ø30.0 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02999", "images": ["images/Shaft_02999.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.2 mm and length at least 284.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.9 mm over length 67.4 mm (from Z=0.0 to Z=246.0).\n10. Finish turn diameter Ø56.7 mm over length 93.1 mm (from Z=0.0 to Z=178.6).\n11. Finish turn diameter Ø48.8 mm over length 41.5 mm (from Z=0.0 to Z=85.5).\n12. Finish turn diameter Ø44.1 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02908", "images": ["images/Shaft_02908.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 218.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.3 mm (from Z=0.0 to Z=136.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.0 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03337", "images": ["images/Shaft_03337.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.5 mm and length at least 110.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.3 mm over length 21.5 mm (from Z=0.0 to Z=86.1).\n9. Finish turn diameter Ø35.6 mm over length 21.8 mm (from Z=0.0 to Z=64.6).\n10. Finish turn diameter Ø30.0 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04615", "images": ["images/Shaft_04615.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.4 mm and length at least 112.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.6 mm over length 57.6 mm (from Z=0.0 to Z=77.0).\n9. Finish turn diameter Ø49.9 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01582", "images": ["images/Shaft_01582.png", "detail_png/Shaft_01582_length.png", "detail_png/Shaft_01582_diam.png", "detail_png/Shaft_01582_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.6 mm and length at least 156.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 8.5 mm (from Z=0.0 to Z=8.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 143.2 mm (from Z=0.0 to Z=143.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01767", "images": ["images/Shaft_01767.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 112.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 76.6 mm (from Z=0.0 to Z=76.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.4 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04327", "images": ["images/Shaft_04327.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.3 mm and length at least 167.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.7 mm over length 6.1 mm (from Z=0.0 to Z=144.1).\n10. Finish turn diameter Ø39.2 mm over length 19.6 mm (from Z=0.0 to Z=138.0).\n11. Finish turn diameter Ø30.0 mm over length 118.4 mm (from Z=0.0 to Z=118.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00911", "images": ["images/Shaft_00911.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.5 mm and length at least 151.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.6 mm over length 34.8 mm (from Z=0.0 to Z=122.2).\n9. Finish turn diameter Ø56.8 mm over length 33.2 mm (from Z=0.0 to Z=87.4).\n10. Finish turn diameter Ø39.9 mm over length 47.3 mm (from Z=0.0 to Z=54.2).\n11. Finish turn diameter Ø33.2 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03543", "images": ["images/Shaft_03543.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.3 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 45.1 mm (from Z=0.0 to Z=149.5).\n10. Finish turn diameter Ø30.0 mm over length 104.4 mm (from Z=0.0 to Z=104.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03407", "images": ["images/Shaft_03407.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 217.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 180.8 mm (from Z=0.0 to Z=180.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01181", "images": ["images/Shaft_01181.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.1 mm and length at least 81.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.1 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03185", "images": ["images/Shaft_03185.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.3 mm and length at least 267.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 97.3 mm (from Z=0.0 to Z=97.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 21.3 mm (from Z=0.0 to Z=165.5).\n10. Finish turn diameter Ø36.7 mm over length 144.2 mm (from Z=0.0 to Z=144.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04876", "images": ["images/Shaft_04876.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.9 mm and length at least 231.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.1 mm over length 65.4 mm (from Z=0.0 to Z=197.9).\n10. Finish turn diameter Ø30.0 mm over length 132.5 mm (from Z=0.0 to Z=132.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01587", "images": ["images/Shaft_01587.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.3 mm and length at least 253.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.3 mm over length 94.8 mm (from Z=0.0 to Z=94.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.0 mm over length 49.2 mm (from Z=0.0 to Z=153.9).\n10. Finish turn diameter Ø56.0 mm over length 104.7 mm (from Z=0.0 to Z=104.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00578", "images": ["images/Shaft_00578.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.9 mm and length at least 216.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 39.4 mm (from Z=0.0 to Z=167.3).\n10. Finish turn diameter Ø44.8 mm over length 16.1 mm (from Z=0.0 to Z=127.9).\n11. Finish turn diameter Ø30.0 mm over length 111.8 mm (from Z=0.0 to Z=111.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03310", "images": ["images/Shaft_03310.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 265.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 171.1 mm (from Z=0.0 to Z=171.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02599", "images": ["images/Shaft_02599.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.3 mm and length at least 167.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 90.3 mm (from Z=0.0 to Z=90.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.1 mm over length 11.3 mm (from Z=0.0 to Z=72.5).\n9. Finish turn diameter Ø30.0 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01215", "images": ["images/Shaft_01215.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.2 mm and length at least 156.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 41.4 mm (from Z=0.0 to Z=113.8).\n9. Finish turn diameter Ø34.3 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04070", "images": ["images/Shaft_04070.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.1 mm and length at least 147.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.9 mm over length 9.2 mm (from Z=0.0 to Z=114.8).\n10. Finish turn diameter Ø30.0 mm over length 105.6 mm (from Z=0.0 to Z=105.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01371", "images": ["images/Shaft_01371.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.6 mm and length at least 243.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.5 mm over length 67.4 mm (from Z=0.0 to Z=222.3).\n10. Finish turn diameter Ø30.0 mm over length 154.9 mm (from Z=0.0 to Z=154.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02074", "images": ["images/Shaft_02074.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.3 mm and length at least 207.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 39.4 mm (from Z=0.0 to Z=39.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.4 mm over length 89.3 mm (from Z=0.0 to Z=163.1).\n10. Finish turn diameter Ø30.0 mm over length 73.8 mm (from Z=0.0 to Z=73.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00677", "images": ["images/Shaft_00677.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.1 mm and length at least 218.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 171.8 mm (from Z=0.0 to Z=171.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00470", "images": ["images/Shaft_00470.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.4 mm and length at least 277.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 230.0 mm (from Z=0.0 to Z=230.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02535", "images": ["images/Shaft_02535.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.4 mm and length at least 91.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.9 mm (from Z=0.0 to Z=55.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01344", "images": ["images/Shaft_01344.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.0 mm and length at least 195.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.3 mm over length 53.1 mm (from Z=0.0 to Z=161.0).\n10. Finish turn diameter Ø30.0 mm over length 107.9 mm (from Z=0.0 to Z=107.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01425", "images": ["images/Shaft_01425.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.5 mm and length at least 124.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 22.0 mm (from Z=0.0 to Z=100.4).\n9. Finish turn diameter Ø36.1 mm over length 15.2 mm (from Z=0.0 to Z=78.4).\n10. Finish turn diameter Ø30.0 mm over length 63.2 mm (from Z=0.0 to Z=63.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00563", "images": ["images/Shaft_00563.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.7 mm and length at least 240.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 51.0 mm (from Z=0.0 to Z=214.3).\n10. Finish turn diameter Ø30.0 mm over length 163.3 mm (from Z=0.0 to Z=163.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00161", "images": ["images/Shaft_00161.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.0 mm and length at least 123.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 57.5 mm (from Z=0.0 to Z=57.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01520", "images": ["images/Shaft_01520.png", "detail_png/Shaft_01520_length.png", "detail_png/Shaft_01520_diam.png", "detail_png/Shaft_01520_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.4 mm and length at least 232.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.4 mm over length 95.0 mm (from Z=0.0 to Z=95.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.6 mm over length 20.1 mm (from Z=0.0 to Z=132.0).\n10. Finish turn diameter Ø44.9 mm over length 66.5 mm (from Z=0.0 to Z=111.9).\n11. Finish turn diameter Ø30.0 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00472", "images": ["images/Shaft_00472.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.9 mm and length at least 187.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 24.0 mm (from Z=0.0 to Z=159.3).\n9. Finish turn diameter Ø36.8 mm over length 92.2 mm (from Z=0.0 to Z=135.3).\n10. Finish turn diameter Ø30.0 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04521", "images": ["images/Shaft_04521.png", "detail_png/Shaft_04521_length.png", "detail_png/Shaft_04521_diam.png", "detail_png/Shaft_04521_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.5 mm and length at least 275.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.1 mm over length 43.8 mm (from Z=0.0 to Z=239.5).\n10. Finish turn diameter Ø50.8 mm over length 64.1 mm (from Z=0.0 to Z=195.7).\n11. Finish turn diameter Ø34.8 mm over length 44.3 mm (from Z=0.0 to Z=131.6).\n12. Finish turn diameter Ø31.5 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02955", "images": ["images/Shaft_02955.png", "detail_png/Shaft_02955_length.png", "detail_png/Shaft_02955_diam.png", "detail_png/Shaft_02955_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.4 mm and length at least 177.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 119.9 mm (from Z=0.0 to Z=119.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 10.9 mm (from Z=0.0 to Z=52.2).\n10. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01322", "images": ["images/Shaft_01322.png", "detail_png/Shaft_01322_length.png", "detail_png/Shaft_01322_diam.png", "detail_png/Shaft_01322_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.2 mm and length at least 241.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 117.6 mm (from Z=0.0 to Z=164.9).\n10. Finish turn diameter Ø45.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01795", "images": ["images/Shaft_01795.png", "detail_png/Shaft_01795_length.png", "detail_png/Shaft_01795_diam.png", "detail_png/Shaft_01795_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.6 mm and length at least 159.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.9 mm over length 94.4 mm (from Z=0.0 to Z=138.5).\n9. Finish turn diameter Ø51.3 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01712", "images": ["images/Shaft_01712.png", "detail_png/Shaft_01712_length.png", "detail_png/Shaft_01712_diam.png", "detail_png/Shaft_01712_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.9 mm and length at least 82.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.8 mm over length 20.4 mm (from Z=0.0 to Z=63.1).\n9. Finish turn diameter Ø41.2 mm over length 18.6 mm (from Z=0.0 to Z=42.7).\n10. Finish turn diameter Ø30.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00915", "images": ["images/Shaft_00915.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.5 mm and length at least 241.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.0 mm over length 22.9 mm (from Z=0.0 to Z=187.2).\n10. Finish turn diameter Ø38.7 mm over length 22.1 mm (from Z=0.0 to Z=164.3).\n11. Finish turn diameter Ø30.0 mm over length 142.2 mm (from Z=0.0 to Z=142.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01107", "images": ["images/Shaft_01107.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 265.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 154.5 mm (from Z=0.0 to Z=154.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 106.1 mm (from Z=0.0 to Z=106.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00288", "images": ["images/Shaft_00288.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.5 mm and length at least 96.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.3 mm over length 18.8 mm (from Z=0.0 to Z=77.5).\n9. Finish turn diameter Ø46.6 mm over length 11.9 mm (from Z=0.0 to Z=58.7).\n10. Finish turn diameter Ø40.4 mm over length 13.9 mm (from Z=0.0 to Z=46.8).\n11. Finish turn diameter Ø37.3 mm over length 19.5 mm (from Z=0.0 to Z=32.9).\n12. Finish turn diameter Ø30.0 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04508", "images": ["images/Shaft_04508.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.5 mm and length at least 299.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 55.9 mm (from Z=0.0 to Z=55.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 238.3 mm (from Z=0.0 to Z=238.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01679", "images": ["images/Shaft_01679.png", "detail_png/Shaft_01679_length.png", "detail_png/Shaft_01679_diam.png", "detail_png/Shaft_01679_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.6 mm and length at least 151.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.3 mm over length 23.4 mm (from Z=0.0 to Z=109.0).\n9. Finish turn diameter Ø46.5 mm over length 31.5 mm (from Z=0.0 to Z=85.6).\n10. Finish turn diameter Ø30.0 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01661", "images": ["images/Shaft_01661.png", "detail_png/Shaft_01661_length.png", "detail_png/Shaft_01661_diam.png", "detail_png/Shaft_01661_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.3 mm and length at least 91.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.7 mm over length 13.2 mm (from Z=0.0 to Z=76.2).\n9. Finish turn diameter Ø30.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03014", "images": ["images/Shaft_03014.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.7 mm and length at least 189.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.1 mm (from Z=0.0 to Z=126.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04097", "images": ["images/Shaft_04097.png", "detail_png/Shaft_04097_length.png", "detail_png/Shaft_04097_diam.png", "detail_png/Shaft_04097_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.9 mm and length at least 164.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.0 mm over length 10.0 mm (from Z=0.0 to Z=135.5).\n9. Finish turn diameter Ø51.0 mm over length 11.7 mm (from Z=0.0 to Z=125.5).\n10. Finish turn diameter Ø42.5 mm over length 38.8 mm (from Z=0.0 to Z=113.8).\n11. Finish turn diameter Ø38.0 mm over length 45.9 mm (from Z=0.0 to Z=75.0).\n12. Finish turn diameter Ø30.0 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02674", "images": ["images/Shaft_02674.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.2 mm and length at least 218.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 47.9 mm (from Z=0.0 to Z=185.3).\n10. Finish turn diameter Ø57.1 mm over length 50.6 mm (from Z=0.0 to Z=137.4).\n11. Finish turn diameter Ø46.3 mm over length 39.6 mm (from Z=0.0 to Z=86.8).\n12. Finish turn diameter Ø41.5 mm over length 32.3 mm (from Z=0.0 to Z=47.2).\n13. Finish turn diameter Ø30.0 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03862", "images": ["images/Shaft_03862.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.3 mm and length at least 322.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 138.7 mm (from Z=0.0 to Z=138.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 178.7 mm (from Z=0.0 to Z=178.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01694", "images": ["images/Shaft_01694.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 270.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 194.8 mm (from Z=0.0 to Z=194.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 70.3 mm (from Z=0.0 to Z=70.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01088", "images": ["images/Shaft_01088.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.0 mm and length at least 210.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.0 mm over length 85.1 mm (from Z=0.0 to Z=85.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.2 mm over length 46.6 mm (from Z=0.0 to Z=120.7).\n10. Finish turn diameter Ø42.9 mm over length 28.8 mm (from Z=0.0 to Z=74.1).\n11. Finish turn diameter Ø30.0 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04139", "images": ["images/Shaft_04139.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.4 mm and length at least 274.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 75.4 mm (from Z=0.0 to Z=75.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.6 mm over length 53.6 mm (from Z=0.0 to Z=193.7).\n10. Finish turn diameter Ø45.1 mm over length 72.2 mm (from Z=0.0 to Z=140.1).\n11. Finish turn diameter Ø34.4 mm over length 67.9 mm (from Z=0.0 to Z=67.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01834", "images": ["images/Shaft_01834.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.6 mm and length at least 188.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 92.7 mm (from Z=0.0 to Z=92.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 57.3 mm (from Z=0.0 to Z=90.3).\n9. Finish turn diameter Ø41.2 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03416", "images": ["images/Shaft_03416.png", "detail_png/Shaft_03416_length.png", "detail_png/Shaft_03416_diam.png", "detail_png/Shaft_03416_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.1 mm and length at least 86.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.4 mm over length 14.8 mm (from Z=0.0 to Z=65.2).\n9. Finish turn diameter Ø34.4 mm over length 8.9 mm (from Z=0.0 to Z=50.4).\n10. Finish turn diameter Ø30.0 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02325", "images": ["images/Shaft_02325.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.8 mm and length at least 212.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 51.2 mm (from Z=0.0 to Z=51.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 46.5 mm (from Z=0.0 to Z=156.6).\n10. Finish turn diameter Ø38.6 mm over length 38.2 mm (from Z=0.0 to Z=110.1).\n11. Finish turn diameter Ø30.0 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01115", "images": ["images/Shaft_01115.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.4 mm and length at least 178.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 122.5 mm (from Z=0.0 to Z=122.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00481", "images": ["images/Shaft_00481.png", "detail_png/Shaft_00481_length.png", "detail_png/Shaft_00481_diam.png", "detail_png/Shaft_00481_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.2 mm and length at least 137.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 6.4 mm (from Z=0.0 to Z=6.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.8 mm over length 62.0 mm (from Z=0.0 to Z=125.8).\n9. Finish turn diameter Ø30.0 mm over length 63.8 mm (from Z=0.0 to Z=63.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02305", "images": ["images/Shaft_02305.png", "detail_png/Shaft_02305_length.png", "detail_png/Shaft_02305_diam.png", "detail_png/Shaft_02305_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.7 mm and length at least 90.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.9 mm over length 15.4 mm (from Z=0.0 to Z=44.2).\n9. Finish turn diameter Ø41.5 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04253", "images": ["images/Shaft_04253.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.4 mm and length at least 197.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.9 mm over length 35.8 mm (from Z=0.0 to Z=158.3).\n10. Finish turn diameter Ø45.3 mm over length 39.1 mm (from Z=0.0 to Z=122.5).\n11. Finish turn diameter Ø41.6 mm over length 36.6 mm (from Z=0.0 to Z=83.4).\n12. Finish turn diameter Ø35.1 mm over length 31.0 mm (from Z=0.0 to Z=46.8).\n13. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01300", "images": ["images/Shaft_01300.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.0 mm and length at least 161.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 143.2 mm (from Z=0.0 to Z=143.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01113", "images": ["images/Shaft_01113.png", "detail_png/Shaft_01113_length.png", "detail_png/Shaft_01113_diam.png", "detail_png/Shaft_01113_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.1 mm and length at least 271.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 251.4 mm (from Z=0.0 to Z=251.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00886", "images": ["images/Shaft_00886.png", "detail_png/Shaft_00886_length.png", "detail_png/Shaft_00886_diam.png", "detail_png/Shaft_00886_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.7 mm and length at least 87.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 6.6 mm (from Z=0.0 to Z=6.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.5 mm over length 25.8 mm (from Z=0.0 to Z=76.3).\n9. Finish turn diameter Ø30.0 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00233", "images": ["images/Shaft_00233.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.7 mm and length at least 179.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.4 mm over length 89.9 mm (from Z=0.0 to Z=107.2).\n9. Finish turn diameter Ø30.0 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04896", "images": ["images/Shaft_04896.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.9 mm and length at least 198.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.5 mm (from Z=0.0 to Z=132.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02917", "images": ["images/Shaft_02917.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.8 mm and length at least 148.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.6 mm over length 20.1 mm (from Z=0.0 to Z=111.4).\n9. Finish turn diameter Ø44.2 mm over length 22.1 mm (from Z=0.0 to Z=91.3).\n10. Finish turn diameter Ø36.8 mm over length 16.3 mm (from Z=0.0 to Z=69.2).\n11. Finish turn diameter Ø32.3 mm over length 19.2 mm (from Z=0.0 to Z=52.9).\n12. Finish turn diameter Ø30.0 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04014", "images": ["images/Shaft_04014.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.1 mm and length at least 77.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04706", "images": ["images/Shaft_04706.png", "detail_png/Shaft_04706_length.png", "detail_png/Shaft_04706_diam.png", "detail_png/Shaft_04706_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.0 mm and length at least 90.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.0 mm over length 6.4 mm (from Z=0.0 to Z=6.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.3 mm over length 7.0 mm (from Z=0.0 to Z=78.6).\n9. Finish turn diameter Ø30.0 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01583", "images": ["images/Shaft_01583.png", "detail_png/Shaft_01583_length.png", "detail_png/Shaft_01583_diam.png", "detail_png/Shaft_01583_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.2 mm and length at least 103.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.1 mm over length 39.6 mm (from Z=0.0 to Z=82.8).\n9. Finish turn diameter Ø47.4 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01651", "images": ["images/Shaft_01651.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.1 mm and length at least 101.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 77.8 mm (from Z=0.0 to Z=77.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00719", "images": ["images/Shaft_00719.png", "detail_png/Shaft_00719_length.png", "detail_png/Shaft_00719_diam.png", "detail_png/Shaft_00719_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.6 mm and length at least 129.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.2 mm over length 38.3 mm (from Z=0.0 to Z=75.8).\n9. Finish turn diameter Ø44.0 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01549", "images": ["images/Shaft_01549.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.3 mm and length at least 279.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 217.6 mm (from Z=0.0 to Z=217.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02053", "images": ["images/Shaft_02053.png", "detail_png/Shaft_02053_length.png", "detail_png/Shaft_02053_diam.png", "detail_png/Shaft_02053_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.1 mm and length at least 156.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.1 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.1 mm over length 51.6 mm (from Z=0.0 to Z=108.7).\n9. Finish turn diameter Ø44.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01670", "images": ["images/Shaft_01670.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 254.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 207.5 mm (from Z=0.0 to Z=207.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00714", "images": ["images/Shaft_00714.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 223.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.9 mm (from Z=0.0 to Z=167.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.7 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00706", "images": ["images/Shaft_00706.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.5 mm and length at least 174.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 63.8 mm (from Z=0.0 to Z=63.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.7 mm over length 12.2 mm (from Z=0.0 to Z=105.5).\n10. Finish turn diameter Ø30.0 mm over length 93.3 mm (from Z=0.0 to Z=93.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01851", "images": ["images/Shaft_01851.png", "detail_png/Shaft_01851_length.png", "detail_png/Shaft_01851_diam.png", "detail_png/Shaft_01851_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.2 mm and length at least 210.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 89.0 mm (from Z=0.0 to Z=89.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.5 mm over length 100.0 mm (from Z=0.0 to Z=116.1).\n10. Finish turn diameter Ø30.0 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00847", "images": ["images/Shaft_00847.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.7 mm and length at least 253.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.7 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.0 mm over length 26.4 mm (from Z=0.0 to Z=214.3).\n10. Finish turn diameter Ø39.0 mm over length 95.3 mm (from Z=0.0 to Z=187.9).\n11. Finish turn diameter Ø30.0 mm over length 92.6 mm (from Z=0.0 to Z=92.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01337", "images": ["images/Shaft_01337.png", "detail_png/Shaft_01337_length.png", "detail_png/Shaft_01337_diam.png", "detail_png/Shaft_01337_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.6 mm and length at least 300.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 82.0 mm (from Z=0.0 to Z=82.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.6 mm over length 31.8 mm (from Z=0.0 to Z=213.9).\n10. Finish turn diameter Ø30.0 mm over length 182.1 mm (from Z=0.0 to Z=182.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03558", "images": ["images/Shaft_03558.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.5 mm and length at least 131.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 74.0 mm (from Z=0.0 to Z=74.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01319", "images": ["images/Shaft_01319.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.4 mm and length at least 65.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.7 mm over length 11.3 mm (from Z=0.0 to Z=23.4).\n9. Finish turn diameter Ø62.1 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04036", "images": ["images/Shaft_04036.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.9 mm and length at least 175.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.9 mm over length 43.1 mm (from Z=0.0 to Z=145.3).\n9. Finish turn diameter Ø33.5 mm over length 45.2 mm (from Z=0.0 to Z=102.2).\n10. Finish turn diameter Ø30.0 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04251", "images": ["images/Shaft_04251.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.6 mm and length at least 158.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.1 mm (from Z=0.0 to Z=107.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01224", "images": ["images/Shaft_01224.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.4 mm and length at least 227.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 76.0 mm (from Z=0.0 to Z=76.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.4 mm over length 31.1 mm (from Z=0.0 to Z=146.4).\n10. Finish turn diameter Ø46.2 mm over length 80.9 mm (from Z=0.0 to Z=115.3).\n11. Finish turn diameter Ø30.0 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02085", "images": ["images/Shaft_02085.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.9 mm and length at least 249.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 95.0 mm (from Z=0.0 to Z=95.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.7 mm over length 66.8 mm (from Z=0.0 to Z=149.0).\n10. Finish turn diameter Ø30.0 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04299", "images": ["images/Shaft_04299.png", "detail_png/Shaft_04299_length.png", "detail_png/Shaft_04299_diam.png", "detail_png/Shaft_04299_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.4 mm and length at least 124.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.4 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.7 mm over length 74.7 mm (from Z=0.0 to Z=99.6).\n9. Finish turn diameter Ø47.6 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04037", "images": ["images/Shaft_04037.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.5 mm and length at least 195.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.9 mm over length 28.6 mm (from Z=0.0 to Z=153.3).\n10. Finish turn diameter Ø35.6 mm over length 29.5 mm (from Z=0.0 to Z=124.7).\n11. Finish turn diameter Ø30.0 mm over length 95.2 mm (from Z=0.0 to Z=95.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00045", "images": ["images/Shaft_00045.png", "detail_png/Shaft_00045_length.png", "detail_png/Shaft_00045_diam.png", "detail_png/Shaft_00045_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.9 mm and length at least 181.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 152.9 mm (from Z=0.0 to Z=152.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01198", "images": ["images/Shaft_01198.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.9 mm and length at least 97.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02021", "images": ["images/Shaft_02021.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.2 mm and length at least 209.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.6 mm over length 71.7 mm (from Z=0.0 to Z=150.5).\n10. Finish turn diameter Ø44.0 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01755", "images": ["images/Shaft_01755.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.3 mm and length at least 108.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.1 mm over length 23.6 mm (from Z=0.0 to Z=74.9).\n9. Finish turn diameter Ø56.0 mm over length 51.3 mm (from Z=0.0 to Z=51.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02415", "images": ["images/Shaft_02415.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.6 mm and length at least 323.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 93.8 mm (from Z=0.0 to Z=93.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.7 mm over length 115.7 mm (from Z=0.0 to Z=225.0).\n10. Finish turn diameter Ø63.7 mm over length 73.3 mm (from Z=0.0 to Z=109.3).\n11. Finish turn diameter Ø49.1 mm over length 22.4 mm (from Z=0.0 to Z=36.0).\n12. Finish turn diameter Ø31.3 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04017", "images": ["images/Shaft_04017.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.3 mm and length at least 307.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 238.0 mm (from Z=0.0 to Z=238.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03469", "images": ["images/Shaft_03469.png", "detail_png/Shaft_03469_length.png", "detail_png/Shaft_03469_diam.png", "detail_png/Shaft_03469_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.7 mm and length at least 228.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.7 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 55.7 mm (from Z=0.0 to Z=186.2).\n10. Finish turn diameter Ø44.0 mm over length 35.9 mm (from Z=0.0 to Z=130.5).\n11. Finish turn diameter Ø32.3 mm over length 58.0 mm (from Z=0.0 to Z=94.6).\n12. Finish turn diameter Ø30.0 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03980", "images": ["images/Shaft_03980.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 299.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 160.7 mm (from Z=0.0 to Z=160.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.2 mm over length 133.7 mm (from Z=0.0 to Z=133.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04580", "images": ["images/Shaft_04580.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.9 mm and length at least 212.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 92.9 mm (from Z=0.0 to Z=92.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 21.5 mm (from Z=0.0 to Z=114.7).\n10. Finish turn diameter Ø30.0 mm over length 93.2 mm (from Z=0.0 to Z=93.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03917", "images": ["images/Shaft_03917.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 156.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.0 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04758", "images": ["images/Shaft_04758.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.7 mm and length at least 79.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00307", "images": ["images/Shaft_00307.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.3 mm and length at least 249.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 15.6 mm (from Z=0.0 to Z=191.8).\n10. Finish turn diameter Ø41.9 mm over length 55.4 mm (from Z=0.0 to Z=176.2).\n11. Finish turn diameter Ø34.8 mm over length 16.8 mm (from Z=0.0 to Z=120.8).\n12. Finish turn diameter Ø30.1 mm over length 31.5 mm (from Z=0.0 to Z=104.0).\n13. Finish turn diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04844", "images": ["images/Shaft_04844.png", "detail_png/Shaft_04844_length.png", "detail_png/Shaft_04844_diam.png", "detail_png/Shaft_04844_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.8 mm and length at least 69.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.9 mm over length 12.7 mm (from Z=0.0 to Z=59.3).\n9. Finish turn diameter Ø30.0 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00000", "images": ["images/Shaft_00000.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.7 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 22.3 mm (from Z=0.0 to Z=22.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 58.3 mm (from Z=0.0 to Z=210.9).\n10. Finish turn diameter Ø46.8 mm over length 52.1 mm (from Z=0.0 to Z=152.6).\n11. Finish turn diameter Ø30.0 mm over length 100.5 mm (from Z=0.0 to Z=100.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03238", "images": ["images/Shaft_03238.png", "detail_png/Shaft_03238_length.png", "detail_png/Shaft_03238_diam.png", "detail_png/Shaft_03238_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.8 mm and length at least 320.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.5 mm over length 11.6 mm (from Z=0.0 to Z=275.4).\n10. Finish turn diameter Ø41.2 mm over length 76.0 mm (from Z=0.0 to Z=263.8).\n11. Finish turn diameter Ø31.3 mm over length 81.9 mm (from Z=0.0 to Z=187.8).\n12. Finish turn diameter Ø30.0 mm over length 105.9 mm (from Z=0.0 to Z=105.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03374", "images": ["images/Shaft_03374.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.0 mm and length at least 263.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.2 mm over length 57.6 mm (from Z=0.0 to Z=168.9).\n10. Finish turn diameter Ø48.5 mm over length 63.7 mm (from Z=0.0 to Z=111.3).\n11. Finish turn diameter Ø41.9 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02181", "images": ["images/Shaft_02181.png", "detail_png/Shaft_02181_length.png", "detail_png/Shaft_02181_diam.png", "detail_png/Shaft_02181_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 295.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 223.3 mm (from Z=0.0 to Z=223.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02361", "images": ["images/Shaft_02361.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.5 mm and length at least 274.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.6 mm over length 59.8 mm (from Z=0.0 to Z=223.3).\n10. Finish turn diameter Ø39.6 mm over length 43.1 mm (from Z=0.0 to Z=163.5).\n11. Finish turn diameter Ø30.0 mm over length 120.4 mm (from Z=0.0 to Z=120.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04003", "images": ["images/Shaft_04003.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 281.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 237.0 mm (from Z=0.0 to Z=237.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.3 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02536", "images": ["images/Shaft_02536.png", "detail_png/Shaft_02536_length.png", "detail_png/Shaft_02536_diam.png", "detail_png/Shaft_02536_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.6 mm and length at least 162.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.5 mm over length 47.3 mm (from Z=0.0 to Z=144.7).\n10. Finish turn diameter Ø30.0 mm over length 97.4 mm (from Z=0.0 to Z=97.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03377", "images": ["images/Shaft_03377.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.4 mm and length at least 179.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.8 mm over length 6.2 mm (from Z=0.0 to Z=110.2).\n9. Finish turn diameter Ø61.2 mm over length 50.9 mm (from Z=0.0 to Z=104.0).\n10. Finish turn diameter Ø51.7 mm over length 17.1 mm (from Z=0.0 to Z=53.1).\n11. Finish turn diameter Ø33.7 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01129", "images": ["images/Shaft_01129.png", "detail_png/Shaft_01129_length.png", "detail_png/Shaft_01129_diam.png", "detail_png/Shaft_01129_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.4 mm and length at least 237.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.4 mm over length 122.3 mm (from Z=0.0 to Z=122.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.4 mm over length 49.1 mm (from Z=0.0 to Z=110.6).\n10. Finish turn diameter Ø51.5 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02486", "images": ["images/Shaft_02486.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 273.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 188.7 mm (from Z=0.0 to Z=188.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.7 mm over length 79.6 mm (from Z=0.0 to Z=79.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02923", "images": ["images/Shaft_02923.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.6 mm and length at least 70.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.1 mm over length 19.9 mm (from Z=0.0 to Z=51.7).\n9. Finish turn diameter Ø36.4 mm over length 22.9 mm (from Z=0.0 to Z=31.8).\n10. Finish turn diameter Ø30.0 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02903", "images": ["images/Shaft_02903.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.7 mm and length at least 235.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 21.9 mm (from Z=0.0 to Z=21.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 208.7 mm (from Z=0.0 to Z=208.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00211", "images": ["images/Shaft_00211.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 317.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 199.0 mm (from Z=0.0 to Z=199.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.2 mm over length 113.6 mm (from Z=0.0 to Z=113.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01360", "images": ["images/Shaft_01360.png", "detail_png/Shaft_01360_length.png", "detail_png/Shaft_01360_diam.png", "detail_png/Shaft_01360_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 206.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 78.9 mm (from Z=0.0 to Z=78.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 122.8 mm (from Z=0.0 to Z=122.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01083", "images": ["images/Shaft_01083.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.6 mm and length at least 105.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.9 mm over length 7.5 mm (from Z=0.0 to Z=64.3).\n9. Finish turn diameter Ø40.6 mm over length 20.1 mm (from Z=0.0 to Z=56.8).\n10. Finish turn diameter Ø30.0 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04873", "images": ["images/Shaft_04873.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.4 mm and length at least 226.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 109.6 mm (from Z=0.0 to Z=109.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.8 mm over length 44.8 mm (from Z=0.0 to Z=111.4).\n10. Finish turn diameter Ø32.8 mm over length 25.4 mm (from Z=0.0 to Z=66.6).\n11. Finish turn diameter Ø30.0 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01982", "images": ["images/Shaft_01982.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.7 mm and length at least 157.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.1 mm (from Z=0.0 to Z=107.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03631", "images": ["images/Shaft_03631.png", "detail_png/Shaft_03631_length.png", "detail_png/Shaft_03631_diam.png", "detail_png/Shaft_03631_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.2 mm and length at least 217.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.7 mm over length 61.0 mm (from Z=0.0 to Z=196.5).\n10. Finish turn diameter Ø30.0 mm over length 135.5 mm (from Z=0.0 to Z=135.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00005", "images": ["images/Shaft_00005.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.8 mm and length at least 228.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.9 mm (from Z=0.0 to Z=200.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02193", "images": ["images/Shaft_02193.png", "detail_png/Shaft_02193_length.png", "detail_png/Shaft_02193_diam.png", "detail_png/Shaft_02193_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.6 mm and length at least 203.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 40.0 mm (from Z=0.0 to Z=166.7).\n10. Finish turn diameter Ø30.0 mm over length 126.7 mm (from Z=0.0 to Z=126.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04451", "images": ["images/Shaft_04451.png", "detail_png/Shaft_04451_length.png", "detail_png/Shaft_04451_diam.png", "detail_png/Shaft_04451_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.8 mm and length at least 166.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.0 mm over length 14.1 mm (from Z=0.0 to Z=119.1).\n9. Finish turn diameter Ø59.6 mm over length 44.7 mm (from Z=0.0 to Z=105.0).\n10. Finish turn diameter Ø51.2 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02230", "images": ["images/Shaft_02230.png", "detail_png/Shaft_02230_length.png", "detail_png/Shaft_02230_diam.png", "detail_png/Shaft_02230_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.8 mm and length at least 86.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.9 mm over length 13.0 mm (from Z=0.0 to Z=76.6).\n9. Finish turn diameter Ø30.0 mm over length 63.6 mm (from Z=0.0 to Z=63.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02935", "images": ["images/Shaft_02935.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.1 mm and length at least 319.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.6 mm over length 100.4 mm (from Z=0.0 to Z=258.2).\n10. Finish turn diameter Ø30.0 mm over length 157.8 mm (from Z=0.0 to Z=157.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00906", "images": ["images/Shaft_00906.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.9 mm and length at least 187.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.6 mm over length 44.8 mm (from Z=0.0 to Z=156.8).\n9. Finish turn diameter Ø44.5 mm over length 22.7 mm (from Z=0.0 to Z=112.0).\n10. Finish turn diameter Ø35.1 mm over length 16.1 mm (from Z=0.0 to Z=89.3).\n11. Finish turn diameter Ø30.5 mm over length 73.2 mm (from Z=0.0 to Z=73.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03654", "images": ["images/Shaft_03654.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.9 mm and length at least 219.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 143.8 mm (from Z=0.0 to Z=143.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01997", "images": ["images/Shaft_01997.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.1 mm and length at least 289.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 100.5 mm (from Z=0.0 to Z=100.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø76.0 mm over length 55.7 mm (from Z=0.0 to Z=184.0).\n10. Finish turn diameter Ø59.6 mm over length 74.2 mm (from Z=0.0 to Z=128.3).\n11. Finish turn diameter Ø48.3 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04054", "images": ["images/Shaft_04054.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.5 mm and length at least 133.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.6 mm over length 30.2 mm (from Z=0.0 to Z=74.1).\n9. Finish turn diameter Ø50.4 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02123", "images": ["images/Shaft_02123.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.3 mm and length at least 75.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.5 mm over length 19.7 mm (from Z=0.0 to Z=39.6).\n9. Finish turn diameter Ø30.0 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04931", "images": ["images/Shaft_04931.png", "detail_png/Shaft_04931_length.png", "detail_png/Shaft_04931_diam.png", "detail_png/Shaft_04931_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.8 mm and length at least 324.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 103.3 mm (from Z=0.0 to Z=103.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 215.9 mm (from Z=0.0 to Z=215.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02589", "images": ["images/Shaft_02589.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.3 mm and length at least 86.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.0 mm over length 17.5 mm (from Z=0.0 to Z=44.0).\n9. Finish turn diameter Ø35.0 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02277", "images": ["images/Shaft_02277.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.1 mm and length at least 311.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 79.7 mm (from Z=0.0 to Z=79.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.2 mm over length 44.1 mm (from Z=0.0 to Z=227.2).\n10. Finish turn diameter Ø47.9 mm over length 114.4 mm (from Z=0.0 to Z=183.1).\n11. Finish turn diameter Ø31.8 mm over length 68.7 mm (from Z=0.0 to Z=68.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04089", "images": ["images/Shaft_04089.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.8 mm and length at least 198.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 82.6 mm (from Z=0.0 to Z=82.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.8 mm over length 65.7 mm (from Z=0.0 to Z=111.2).\n10. Finish turn diameter Ø54.8 mm over length 32.0 mm (from Z=0.0 to Z=45.5).\n11. Finish turn diameter Ø38.4 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01368", "images": ["images/Shaft_01368.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 312.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 179.1 mm (from Z=0.0 to Z=179.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 128.7 mm (from Z=0.0 to Z=128.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00189", "images": ["images/Shaft_00189.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 286.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 227.8 mm (from Z=0.0 to Z=227.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.9 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03821", "images": ["images/Shaft_03821.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 280.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 153.0 mm (from Z=0.0 to Z=153.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 122.8 mm (from Z=0.0 to Z=122.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03755", "images": ["images/Shaft_03755.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 153.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 113.6 mm (from Z=0.0 to Z=113.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.2 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01711", "images": ["images/Shaft_01711.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.8 mm and length at least 127.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.1 mm over length 46.3 mm (from Z=0.0 to Z=88.0).\n9. Finish turn diameter Ø30.0 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02216", "images": ["images/Shaft_02216.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.6 mm and length at least 205.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 15.5 mm (from Z=0.0 to Z=161.5).\n10. Finish turn diameter Ø30.0 mm over length 146.0 mm (from Z=0.0 to Z=146.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01973", "images": ["images/Shaft_01973.png", "detail_png/Shaft_01973_length.png", "detail_png/Shaft_01973_diam.png", "detail_png/Shaft_01973_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.0 mm and length at least 286.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 23.6 mm (from Z=0.0 to Z=193.9).\n10. Finish turn diameter Ø30.0 mm over length 170.3 mm (from Z=0.0 to Z=170.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01490", "images": ["images/Shaft_01490.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.2 mm and length at least 214.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.0 mm over length 46.5 mm (from Z=0.0 to Z=162.1).\n10. Finish turn diameter Ø50.5 mm over length 31.6 mm (from Z=0.0 to Z=115.6).\n11. Finish turn diameter Ø42.1 mm over length 26.6 mm (from Z=0.0 to Z=84.0).\n12. Finish turn diameter Ø32.9 mm over length 20.6 mm (from Z=0.0 to Z=57.4).\n13. Finish turn diameter Ø30.0 mm over length 36.8 mm (from Z=0.0 to Z=36.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04249", "images": ["images/Shaft_04249.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.9 mm and length at least 189.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 81.2 mm (from Z=0.0 to Z=81.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.6 mm over length 81.2 mm (from Z=0.0 to Z=103.2).\n9. Finish turn diameter Ø30.0 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02783", "images": ["images/Shaft_02783.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.5 mm and length at least 301.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 93.1 mm (from Z=0.0 to Z=93.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 20.4 mm (from Z=0.0 to Z=203.1).\n10. Finish turn diameter Ø30.0 mm over length 182.7 mm (from Z=0.0 to Z=182.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02032", "images": ["images/Shaft_02032.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.6 mm and length at least 168.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.9 mm over length 65.4 mm (from Z=0.0 to Z=128.4).\n9. Finish turn diameter Ø41.3 mm over length 50.2 mm (from Z=0.0 to Z=63.0).\n10. Finish turn diameter Ø30.0 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03033", "images": ["images/Shaft_03033.png", "detail_png/Shaft_03033_length.png", "detail_png/Shaft_03033_diam.png", "detail_png/Shaft_03033_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 243.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 115.9 mm (from Z=0.0 to Z=115.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.9 mm over length 122.3 mm (from Z=0.0 to Z=122.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01947", "images": ["images/Shaft_01947.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.8 mm and length at least 199.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.5 mm over length 45.5 mm (from Z=0.0 to Z=143.6).\n10. Finish turn diameter Ø35.5 mm over length 27.2 mm (from Z=0.0 to Z=98.1).\n11. Finish turn diameter Ø30.0 mm over length 70.9 mm (from Z=0.0 to Z=70.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02152", "images": ["images/Shaft_02152.png", "detail_png/Shaft_02152_length.png", "detail_png/Shaft_02152_diam.png", "detail_png/Shaft_02152_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.0 mm and length at least 218.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.8 mm over length 41.9 mm (from Z=0.0 to Z=179.7).\n10. Finish turn diameter Ø36.9 mm over length 43.8 mm (from Z=0.0 to Z=137.8).\n11. Finish turn diameter Ø33.4 mm over length 39.1 mm (from Z=0.0 to Z=94.0).\n12. Finish turn diameter Ø30.0 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03166", "images": ["images/Shaft_03166.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.6 mm and length at least 156.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.2 mm (from Z=0.0 to Z=107.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02618", "images": ["images/Shaft_02618.png", "detail_png/Shaft_02618_length.png", "detail_png/Shaft_02618_diam.png", "detail_png/Shaft_02618_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.8 mm and length at least 116.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.6 mm over length 23.8 mm (from Z=0.0 to Z=91.6).\n9. Finish turn diameter Ø56.5 mm over length 25.3 mm (from Z=0.0 to Z=67.8).\n10. Finish turn diameter Ø43.2 mm over length 29.7 mm (from Z=0.0 to Z=42.5).\n11. Finish turn diameter Ø40.2 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02314", "images": ["images/Shaft_02314.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.9 mm and length at least 317.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 31.6 mm (from Z=0.0 to Z=288.5).\n10. Finish turn diameter Ø30.0 mm over length 256.9 mm (from Z=0.0 to Z=256.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01568", "images": ["images/Shaft_01568.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.8 mm and length at least 78.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.8 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.1 mm over length 12.7 mm (from Z=0.0 to Z=53.9).\n9. Finish turn diameter Ø38.5 mm over length 12.4 mm (from Z=0.0 to Z=41.2).\n10. Finish turn diameter Ø30.0 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03757", "images": ["images/Shaft_03757.png", "detail_png/Shaft_03757_length.png", "detail_png/Shaft_03757_diam.png", "detail_png/Shaft_03757_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.4 mm and length at least 316.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 95.0 mm (from Z=0.0 to Z=266.1).\n10. Finish turn diameter Ø30.7 mm over length 49.5 mm (from Z=0.0 to Z=171.1).\n11. Finish turn diameter Ø30.0 mm over length 121.6 mm (from Z=0.0 to Z=121.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04212", "images": ["images/Shaft_04212.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.5 mm and length at least 310.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 55.4 mm (from Z=0.0 to Z=55.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.2 mm over length 66.3 mm (from Z=0.0 to Z=250.0).\n10. Finish turn diameter Ø47.7 mm over length 86.3 mm (from Z=0.0 to Z=183.7).\n11. Finish turn diameter Ø41.3 mm over length 97.4 mm (from Z=0.0 to Z=97.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01556", "images": ["images/Shaft_01556.png", "detail_png/Shaft_01556_length.png", "detail_png/Shaft_01556_diam.png", "detail_png/Shaft_01556_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.3 mm and length at least 113.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.6 mm over length 19.5 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø49.9 mm over length 6.3 mm (from Z=0.0 to Z=66.3).\n10. Finish turn diameter Ø35.1 mm over length 13.2 mm (from Z=0.0 to Z=60.0).\n11. Finish turn diameter Ø30.0 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03252", "images": ["images/Shaft_03252.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.8 mm and length at least 154.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 6.8 mm (from Z=0.0 to Z=6.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.4 mm over length 23.4 mm (from Z=0.0 to Z=142.4).\n10. Finish turn diameter Ø32.4 mm over length 18.2 mm (from Z=0.0 to Z=119.0).\n11. Finish turn diameter Ø30.0 mm over length 100.8 mm (from Z=0.0 to Z=100.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01160", "images": ["images/Shaft_01160.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.2 mm and length at least 322.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.2 mm over length 63.9 mm (from Z=0.0 to Z=243.5).\n10. Finish turn diameter Ø30.0 mm over length 179.6 mm (from Z=0.0 to Z=179.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04160", "images": ["images/Shaft_04160.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.0 mm and length at least 73.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 8.6 mm (from Z=0.0 to Z=60.1).\n9. Finish turn diameter Ø47.3 mm over length 9.0 mm (from Z=0.0 to Z=51.5).\n10. Finish turn diameter Ø32.2 mm over length 5.0 mm (from Z=0.0 to Z=42.5).\n11. Finish turn diameter Ø30.0 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03119", "images": ["images/Shaft_03119.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.4 mm and length at least 146.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.4 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 127.9 mm (from Z=0.0 to Z=127.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01480", "images": ["images/Shaft_01480.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.0 mm and length at least 107.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.5 mm over length 13.8 mm (from Z=0.0 to Z=85.9).\n9. Finish turn diameter Ø30.6 mm over length 25.9 mm (from Z=0.0 to Z=72.1).\n10. Finish turn diameter Ø30.0 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01742", "images": ["images/Shaft_01742.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 178.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 98.5 mm (from Z=0.0 to Z=98.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00986", "images": ["images/Shaft_00986.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.4 mm and length at least 190.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 80.7 mm (from Z=0.0 to Z=80.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.5 mm over length 53.9 mm (from Z=0.0 to Z=105.0).\n9. Finish turn diameter Ø54.4 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00474", "images": ["images/Shaft_00474.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.4 mm and length at least 275.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.1 mm over length 87.0 mm (from Z=0.0 to Z=236.3).\n10. Finish turn diameter Ø30.0 mm over length 149.3 mm (from Z=0.0 to Z=149.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04470", "images": ["images/Shaft_04470.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 239.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 170.0 mm (from Z=0.0 to Z=170.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.4 mm over length 64.9 mm (from Z=0.0 to Z=64.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00880", "images": ["images/Shaft_00880.png", "detail_png/Shaft_00880_length.png", "detail_png/Shaft_00880_diam.png", "detail_png/Shaft_00880_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.6 mm and length at least 86.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 19.6 mm (from Z=0.0 to Z=73.6).\n9. Finish turn diameter Ø44.5 mm over length 14.4 mm (from Z=0.0 to Z=54.0).\n10. Finish turn diameter Ø30.5 mm over length 19.4 mm (from Z=0.0 to Z=39.6).\n11. Finish turn diameter Ø30.0 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00176", "images": ["images/Shaft_00176.png", "detail_png/Shaft_00176_length.png", "detail_png/Shaft_00176_diam.png", "detail_png/Shaft_00176_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 70.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.8 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03538", "images": ["images/Shaft_03538.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.5 mm and length at least 229.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 155.6 mm (from Z=0.0 to Z=155.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02042", "images": ["images/Shaft_02042.png", "detail_png/Shaft_02042_length.png", "detail_png/Shaft_02042_diam.png", "detail_png/Shaft_02042_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.2 mm and length at least 290.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.8 mm over length 140.6 mm (from Z=0.0 to Z=235.0).\n10. Finish turn diameter Ø57.6 mm over length 72.8 mm (from Z=0.0 to Z=94.4).\n11. Finish turn diameter Ø50.1 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03681", "images": ["images/Shaft_03681.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.1 mm and length at least 274.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 12.4 mm (from Z=0.0 to Z=12.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 256.8 mm (from Z=0.0 to Z=256.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01281", "images": ["images/Shaft_01281.png", "detail_png/Shaft_01281_length.png", "detail_png/Shaft_01281_diam.png", "detail_png/Shaft_01281_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.8 mm and length at least 122.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.8 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.7 mm over length 5.0 mm (from Z=0.0 to Z=97.1).\n9. Finish turn diameter Ø37.6 mm over length 31.7 mm (from Z=0.0 to Z=92.1).\n10. Finish turn diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02411", "images": ["images/Shaft_02411.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.2 mm and length at least 280.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 101.0 mm (from Z=0.0 to Z=101.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.9 mm over length 83.8 mm (from Z=0.0 to Z=174.1).\n10. Finish turn diameter Ø30.4 mm over length 18.9 mm (from Z=0.0 to Z=90.3).\n11. Finish turn diameter Ø30.0 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03272", "images": ["images/Shaft_03272.png", "detail_png/Shaft_03272_length.png", "detail_png/Shaft_03272_diam.png", "detail_png/Shaft_03272_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.6 mm and length at least 180.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 81.4 mm (from Z=0.0 to Z=81.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.8 mm over length 77.0 mm (from Z=0.0 to Z=94.2).\n9. Finish turn diameter Ø30.0 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00250", "images": ["images/Shaft_00250.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 292.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 254.2 mm (from Z=0.0 to Z=254.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.3 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01155", "images": ["images/Shaft_01155.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.3 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.0 mm over length 83.8 mm (from Z=0.0 to Z=175.2).\n10. Finish turn diameter Ø30.0 mm over length 91.4 mm (from Z=0.0 to Z=91.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04261", "images": ["images/Shaft_04261.png", "detail_png/Shaft_04261_length.png", "detail_png/Shaft_04261_diam.png", "detail_png/Shaft_04261_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 86.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.7 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03282", "images": ["images/Shaft_03282.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.3 mm and length at least 301.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.3 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.3 mm over length 68.7 mm (from Z=0.0 to Z=283.2).\n10. Finish turn diameter Ø39.4 mm over length 89.1 mm (from Z=0.0 to Z=214.5).\n11. Finish turn diameter Ø30.0 mm over length 125.4 mm (from Z=0.0 to Z=125.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03526", "images": ["images/Shaft_03526.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.6 mm and length at least 171.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.6 mm over length 66.5 mm (from Z=0.0 to Z=146.7).\n9. Finish turn diameter Ø56.0 mm over length 12.1 mm (from Z=0.0 to Z=80.2).\n10. Finish turn diameter Ø45.1 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02197", "images": ["images/Shaft_02197.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.9 mm and length at least 245.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 103.2 mm (from Z=0.0 to Z=103.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 137.3 mm (from Z=0.0 to Z=137.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00831", "images": ["images/Shaft_00831.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.3 mm and length at least 154.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.7 mm over length 47.3 mm (from Z=0.0 to Z=136.3).\n9. Finish turn diameter Ø32.6 mm over length 47.9 mm (from Z=0.0 to Z=89.0).\n10. Finish turn diameter Ø30.0 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00120", "images": ["images/Shaft_00120.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.3 mm and length at least 257.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.3 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.8 mm over length 25.0 mm (from Z=0.0 to Z=226.0).\n10. Finish turn diameter Ø35.2 mm over length 42.7 mm (from Z=0.0 to Z=201.0).\n11. Finish turn diameter Ø30.0 mm over length 158.3 mm (from Z=0.0 to Z=158.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02508", "images": ["images/Shaft_02508.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.8 mm and length at least 208.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 13.9 mm (from Z=0.0 to Z=157.6).\n10. Finish turn diameter Ø30.0 mm over length 143.7 mm (from Z=0.0 to Z=143.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01209", "images": ["images/Shaft_01209.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.5 mm and length at least 127.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.2 mm over length 26.6 mm (from Z=0.0 to Z=103.1).\n9. Finish turn diameter Ø38.5 mm over length 5.0 mm (from Z=0.0 to Z=76.5).\n10. Finish turn diameter Ø31.3 mm over length 33.8 mm (from Z=0.0 to Z=71.5).\n11. Finish turn diameter Ø30.0 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02930", "images": ["images/Shaft_02930.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.3 mm and length at least 207.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 140.6 mm (from Z=0.0 to Z=158.6).\n10. Finish turn diameter Ø53.5 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01384", "images": ["images/Shaft_01384.png", "detail_png/Shaft_01384_length.png", "detail_png/Shaft_01384_diam.png", "detail_png/Shaft_01384_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.4 mm and length at least 117.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.4 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 47.6 mm (from Z=0.0 to Z=90.7).\n9. Finish turn diameter Ø37.3 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02186", "images": ["images/Shaft_02186.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.7 mm and length at least 125.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 61.2 mm (from Z=0.0 to Z=98.9).\n9. Finish turn diameter Ø30.0 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02666", "images": ["images/Shaft_02666.png", "detail_png/Shaft_02666_length.png", "detail_png/Shaft_02666_diam.png", "detail_png/Shaft_02666_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.6 mm and length at least 83.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.9 mm over length 6.7 mm (from Z=0.0 to Z=68.2).\n9. Finish turn diameter Ø66.1 mm over length 16.0 mm (from Z=0.0 to Z=61.5).\n10. Finish turn diameter Ø48.0 mm over length 29.9 mm (from Z=0.0 to Z=45.5).\n11. Finish turn diameter Ø36.8 mm over length 15.6 mm (from Z=0.0 to Z=15.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02048", "images": ["images/Shaft_02048.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.2 mm and length at least 314.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 72.2 mm (from Z=0.0 to Z=72.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.2 mm over length 55.7 mm (from Z=0.0 to Z=237.6).\n10. Finish turn diameter Ø30.9 mm over length 41.2 mm (from Z=0.0 to Z=181.9).\n11. Finish turn diameter Ø30.0 mm over length 140.7 mm (from Z=0.0 to Z=140.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00995", "images": ["images/Shaft_00995.png", "detail_png/Shaft_00995_length.png", "detail_png/Shaft_00995_diam.png", "detail_png/Shaft_00995_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.3 mm and length at least 292.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.3 mm over length 56.5 mm (from Z=0.0 to Z=256.6).\n10. Finish turn diameter Ø30.0 mm over length 200.1 mm (from Z=0.0 to Z=200.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02265", "images": ["images/Shaft_02265.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.1 mm and length at least 130.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.9 mm over length 13.9 mm (from Z=0.0 to Z=56.7).\n9. Finish turn diameter Ø46.4 mm over length 20.0 mm (from Z=0.0 to Z=42.8).\n10. Finish turn diameter Ø33.9 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02780", "images": ["images/Shaft_02780.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 203.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 158.6 mm (from Z=0.0 to Z=158.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00104", "images": ["images/Shaft_00104.png", "detail_png/Shaft_00104_length.png", "detail_png/Shaft_00104_diam.png", "detail_png/Shaft_00104_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.2 mm and length at least 247.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 33.8 mm (from Z=0.0 to Z=211.8).\n10. Finish turn diameter Ø45.0 mm over length 105.0 mm (from Z=0.0 to Z=178.0).\n11. Finish turn diameter Ø32.7 mm over length 73.0 mm (from Z=0.0 to Z=73.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01032", "images": ["images/Shaft_01032.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.5 mm and length at least 176.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.4 mm over length 52.5 mm (from Z=0.0 to Z=117.0).\n9. Finish turn diameter Ø30.0 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00370", "images": ["images/Shaft_00370.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.1 mm and length at least 277.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.8 mm over length 45.1 mm (from Z=0.0 to Z=254.2).\n10. Finish turn diameter Ø45.5 mm over length 69.0 mm (from Z=0.0 to Z=209.1).\n11. Finish turn diameter Ø41.2 mm over length 86.2 mm (from Z=0.0 to Z=140.1).\n12. Finish turn diameter Ø34.9 mm over length 30.9 mm (from Z=0.0 to Z=53.9).\n13. Finish turn diameter Ø30.0 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03246", "images": ["images/Shaft_03246.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.9 mm and length at least 237.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.3 mm over length 55.4 mm (from Z=0.0 to Z=221.8).\n10. Finish turn diameter Ø30.0 mm over length 166.4 mm (from Z=0.0 to Z=166.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00200", "images": ["images/Shaft_00200.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.4 mm and length at least 302.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 82.9 mm (from Z=0.0 to Z=82.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 214.4 mm (from Z=0.0 to Z=214.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04433", "images": ["images/Shaft_04433.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 120.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00965", "images": ["images/Shaft_00965.png", "detail_png/Shaft_00965_length.png", "detail_png/Shaft_00965_diam.png", "detail_png/Shaft_00965_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.6 mm and length at least 276.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 186.9 mm (from Z=0.0 to Z=186.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00692", "images": ["images/Shaft_00692.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.0 mm and length at least 251.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 9.8 mm (from Z=0.0 to Z=9.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.3 mm over length 39.7 mm (from Z=0.0 to Z=237.1).\n10. Finish turn diameter Ø49.2 mm over length 52.1 mm (from Z=0.0 to Z=197.4).\n11. Finish turn diameter Ø31.0 mm over length 39.0 mm (from Z=0.0 to Z=145.3).\n12. Finish turn diameter Ø30.0 mm over length 106.3 mm (from Z=0.0 to Z=106.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01844", "images": ["images/Shaft_01844.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.9 mm and length at least 135.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.8 mm (from Z=0.0 to Z=82.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03421", "images": ["images/Shaft_03421.png", "detail_png/Shaft_03421_length.png", "detail_png/Shaft_03421_diam.png", "detail_png/Shaft_03421_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.5 mm and length at least 257.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.9 mm over length 70.2 mm (from Z=0.0 to Z=182.4).\n10. Finish turn diameter Ø47.4 mm over length 34.4 mm (from Z=0.0 to Z=112.2).\n11. Finish turn diameter Ø30.0 mm over length 77.8 mm (from Z=0.0 to Z=77.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03425", "images": ["images/Shaft_03425.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.8 mm and length at least 142.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.8 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 92.1 mm (from Z=0.0 to Z=92.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01966", "images": ["images/Shaft_01966.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 258.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 159.8 mm (from Z=0.0 to Z=159.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.9 mm over length 93.4 mm (from Z=0.0 to Z=93.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04808", "images": ["images/Shaft_04808.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.5 mm and length at least 160.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.8 mm over length 9.2 mm (from Z=0.0 to Z=116.8).\n9. Finish turn diameter Ø42.3 mm over length 21.3 mm (from Z=0.0 to Z=107.6).\n10. Finish turn diameter Ø30.0 mm over length 86.3 mm (from Z=0.0 to Z=86.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01936", "images": ["images/Shaft_01936.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.4 mm and length at least 278.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.6 mm over length 81.9 mm (from Z=0.0 to Z=201.0).\n10. Finish turn diameter Ø37.5 mm over length 119.1 mm (from Z=0.0 to Z=119.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03305", "images": ["images/Shaft_03305.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.4 mm and length at least 97.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00311", "images": ["images/Shaft_00311.png", "detail_png/Shaft_00311_length.png", "detail_png/Shaft_00311_diam.png", "detail_png/Shaft_00311_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 280.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.7 mm (from Z=0.0 to Z=202.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.3 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00055", "images": ["images/Shaft_00055.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.6 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.2 mm over length 25.4 mm (from Z=0.0 to Z=97.8).\n9. Finish turn diameter Ø54.8 mm over length 30.2 mm (from Z=0.0 to Z=72.4).\n10. Finish turn diameter Ø40.9 mm over length 6.1 mm (from Z=0.0 to Z=42.2).\n11. Finish turn diameter Ø30.3 mm over length 20.3 mm (from Z=0.0 to Z=36.1).\n12. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02591", "images": ["images/Shaft_02591.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.1 mm and length at least 308.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 45.9 mm (from Z=0.0 to Z=209.2).\n10. Finish turn diameter Ø30.0 mm over length 163.3 mm (from Z=0.0 to Z=163.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00331", "images": ["images/Shaft_00331.png", "detail_png/Shaft_00331_length.png", "detail_png/Shaft_00331_diam.png", "detail_png/Shaft_00331_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.1 mm and length at least 294.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 257.0 mm (from Z=0.0 to Z=257.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03441", "images": ["images/Shaft_03441.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.9 mm and length at least 120.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.5 mm (from Z=0.0 to Z=81.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03086", "images": ["images/Shaft_03086.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 126.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 89.6 mm (from Z=0.0 to Z=89.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø20.7 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03355", "images": ["images/Shaft_03355.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.9 mm and length at least 77.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 12.4 mm (from Z=0.0 to Z=12.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 16.3 mm (from Z=0.0 to Z=60.5).\n9. Finish turn diameter Ø30.0 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03020", "images": ["images/Shaft_03020.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.6 mm and length at least 77.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04594", "images": ["images/Shaft_04594.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.8 mm and length at least 186.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 17.2 mm (from Z=0.0 to Z=121.2).\n10. Finish turn diameter Ø30.0 mm over length 104.0 mm (from Z=0.0 to Z=104.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01148", "images": ["images/Shaft_01148.png", "detail_png/Shaft_01148_length.png", "detail_png/Shaft_01148_diam.png", "detail_png/Shaft_01148_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.9 mm and length at least 201.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 77.7 mm (from Z=0.0 to Z=147.6).\n10. Finish turn diameter Ø30.0 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03704", "images": ["images/Shaft_03704.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.7 mm and length at least 195.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.4 mm over length 36.9 mm (from Z=0.0 to Z=140.2).\n10. Finish turn diameter Ø30.0 mm over length 103.3 mm (from Z=0.0 to Z=103.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02851", "images": ["images/Shaft_02851.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 270.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 211.9 mm (from Z=0.0 to Z=211.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.7 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02619", "images": ["images/Shaft_02619.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.4 mm and length at least 124.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 52.8 mm (from Z=0.0 to Z=52.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.2 mm over length 37.1 mm (from Z=0.0 to Z=66.7).\n9. Finish turn diameter Ø35.6 mm over length 5.6 mm (from Z=0.0 to Z=29.6).\n10. Finish turn diameter Ø30.0 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03371", "images": ["images/Shaft_03371.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.8 mm and length at least 147.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 58.7 mm (from Z=0.0 to Z=58.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01896", "images": ["images/Shaft_01896.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.0 mm and length at least 142.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.9 mm over length 17.1 mm (from Z=0.0 to Z=124.1).\n10. Finish turn diameter Ø30.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01216", "images": ["images/Shaft_01216.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.6 mm and length at least 106.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.5 mm (from Z=0.0 to Z=82.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01972", "images": ["images/Shaft_01972.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.1 mm and length at least 306.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.1 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 257.7 mm (from Z=0.0 to Z=257.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04621", "images": ["images/Shaft_04621.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.9 mm and length at least 246.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 215.8 mm (from Z=0.0 to Z=215.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01110", "images": ["images/Shaft_01110.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 140.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 112.1 mm (from Z=0.0 to Z=112.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01221", "images": ["images/Shaft_01221.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.8 mm and length at least 92.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 5.5 mm (from Z=0.0 to Z=5.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.0 mm (from Z=0.0 to Z=82.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01052", "images": ["images/Shaft_01052.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 225.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 149.4 mm (from Z=0.0 to Z=149.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03929", "images": ["images/Shaft_03929.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.1 mm and length at least 92.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 16.3 mm (from Z=0.0 to Z=82.0).\n9. Finish turn diameter Ø39.4 mm over length 5.0 mm (from Z=0.0 to Z=65.7).\n10. Finish turn diameter Ø30.0 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04510", "images": ["images/Shaft_04510.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.3 mm and length at least 277.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 106.7 mm (from Z=0.0 to Z=106.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.5 mm over length 118.3 mm (from Z=0.0 to Z=165.8).\n10. Finish turn diameter Ø39.6 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04901", "images": ["images/Shaft_04901.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.8 mm and length at least 203.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 67.3 mm (from Z=0.0 to Z=187.5).\n10. Finish turn diameter Ø45.7 mm over length 80.4 mm (from Z=0.0 to Z=120.2).\n11. Finish turn diameter Ø30.0 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01678", "images": ["images/Shaft_01678.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.0 mm and length at least 162.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.0 mm over length 39.6 mm (from Z=0.0 to Z=134.0).\n9. Finish turn diameter Ø54.3 mm over length 32.7 mm (from Z=0.0 to Z=94.4).\n10. Finish turn diameter Ø49.6 mm over length 20.6 mm (from Z=0.0 to Z=61.7).\n11. Finish turn diameter Ø39.5 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04154", "images": ["images/Shaft_04154.png", "detail_png/Shaft_04154_length.png", "detail_png/Shaft_04154_diam.png", "detail_png/Shaft_04154_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.9 mm and length at least 258.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 92.8 mm (from Z=0.0 to Z=244.1).\n10. Finish turn diameter Ø51.3 mm over length 99.3 mm (from Z=0.0 to Z=151.3).\n11. Finish turn diameter Ø43.2 mm over length 29.8 mm (from Z=0.0 to Z=52.0).\n12. Finish turn diameter Ø30.0 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02244", "images": ["images/Shaft_02244.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 127.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 106.5 mm (from Z=0.0 to Z=106.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 15.6 mm (from Z=0.0 to Z=15.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01828", "images": ["images/Shaft_01828.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.0 mm and length at least 274.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 237.7 mm (from Z=0.0 to Z=237.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00230", "images": ["images/Shaft_00230.png", "detail_png/Shaft_00230_length.png", "detail_png/Shaft_00230_diam.png", "detail_png/Shaft_00230_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.6 mm and length at least 160.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.1 mm over length 44.2 mm (from Z=0.0 to Z=113.1).\n9. Finish turn diameter Ø30.0 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01313", "images": ["images/Shaft_01313.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.8 mm and length at least 202.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.8 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 8.4 mm (from Z=0.0 to Z=180.7).\n10. Finish turn diameter Ø33.5 mm over length 19.0 mm (from Z=0.0 to Z=172.3).\n11. Finish turn diameter Ø30.0 mm over length 153.3 mm (from Z=0.0 to Z=153.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01314", "images": ["images/Shaft_01314.png", "detail_png/Shaft_01314_length.png", "detail_png/Shaft_01314_diam.png", "detail_png/Shaft_01314_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.0 mm and length at least 96.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 28.8 mm (from Z=0.0 to Z=74.5).\n9. Finish turn diameter Ø48.6 mm over length 21.2 mm (from Z=0.0 to Z=45.7).\n10. Finish turn diameter Ø42.4 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02638", "images": ["images/Shaft_02638.png", "detail_png/Shaft_02638_length.png", "detail_png/Shaft_02638_diam.png", "detail_png/Shaft_02638_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.8 mm and length at least 115.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.8 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.7 mm over length 24.3 mm (from Z=0.0 to Z=81.5).\n9. Finish turn diameter Ø55.8 mm over length 5.0 mm (from Z=0.0 to Z=57.2).\n10. Finish turn diameter Ø44.7 mm over length 20.1 mm (from Z=0.0 to Z=52.2).\n11. Finish turn diameter Ø35.9 mm over length 12.9 mm (from Z=0.0 to Z=32.1).\n12. Finish turn diameter Ø30.0 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00926", "images": ["images/Shaft_00926.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.5 mm and length at least 236.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.5 mm over length 72.3 mm (from Z=0.0 to Z=72.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.2 mm over length 101.0 mm (from Z=0.0 to Z=159.6).\n10. Finish turn diameter Ø39.2 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01427", "images": ["images/Shaft_01427.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.3 mm and length at least 270.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 89.4 mm (from Z=0.0 to Z=89.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 60.4 mm (from Z=0.0 to Z=176.0).\n10. Finish turn diameter Ø43.3 mm over length 68.3 mm (from Z=0.0 to Z=115.6).\n11. Finish turn diameter Ø37.8 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03181", "images": ["images/Shaft_03181.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.9 mm and length at least 182.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 84.6 mm (from Z=0.0 to Z=84.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.3 mm over length 75.5 mm (from Z=0.0 to Z=92.5).\n9. Finish turn diameter Ø31.6 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02554", "images": ["images/Shaft_02554.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.2 mm and length at least 316.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.3 mm over length 47.0 mm (from Z=0.0 to Z=268.0).\n10. Finish turn diameter Ø49.9 mm over length 59.0 mm (from Z=0.0 to Z=221.0).\n11. Finish turn diameter Ø39.6 mm over length 103.4 mm (from Z=0.0 to Z=162.0).\n12. Finish turn diameter Ø30.0 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04851", "images": ["images/Shaft_04851.png", "detail_png/Shaft_04851_length.png", "detail_png/Shaft_04851_diam.png", "detail_png/Shaft_04851_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.6 mm and length at least 297.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 102.0 mm (from Z=0.0 to Z=102.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.7 mm over length 76.8 mm (from Z=0.0 to Z=190.3).\n10. Finish turn diameter Ø37.7 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02989", "images": ["images/Shaft_02989.png", "detail_png/Shaft_02989_length.png", "detail_png/Shaft_02989_diam.png", "detail_png/Shaft_02989_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.8 mm and length at least 256.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 77.6 mm (from Z=0.0 to Z=77.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 174.0 mm (from Z=0.0 to Z=174.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02519", "images": ["images/Shaft_02519.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.8 mm and length at least 218.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 56.8 mm (from Z=0.0 to Z=56.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 156.3 mm (from Z=0.0 to Z=156.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03485", "images": ["images/Shaft_03485.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.4 mm and length at least 174.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.4 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 33.7 mm (from Z=0.0 to Z=161.6).\n10. Finish turn diameter Ø30.0 mm over length 127.9 mm (from Z=0.0 to Z=127.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00280", "images": ["images/Shaft_00280.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.1 mm and length at least 287.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 28.9 mm (from Z=0.0 to Z=232.1).\n10. Finish turn diameter Ø53.0 mm over length 54.9 mm (from Z=0.0 to Z=203.2).\n11. Finish turn diameter Ø47.4 mm over length 18.2 mm (from Z=0.0 to Z=148.3).\n12. Finish turn diameter Ø30.0 mm over length 130.1 mm (from Z=0.0 to Z=130.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03723", "images": ["images/Shaft_03723.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 76.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.6 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02080", "images": ["images/Shaft_02080.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.6 mm and length at least 150.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.6 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.9 mm over length 13.9 mm (from Z=0.0 to Z=118.7).\n9. Finish turn diameter Ø42.2 mm over length 29.3 mm (from Z=0.0 to Z=104.8).\n10. Finish turn diameter Ø32.0 mm over length 22.2 mm (from Z=0.0 to Z=75.5).\n11. Finish turn diameter Ø30.0 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02344", "images": ["images/Shaft_02344.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.6 mm and length at least 72.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04495", "images": ["images/Shaft_04495.png", "detail_png/Shaft_04495_length.png", "detail_png/Shaft_04495_diam.png", "detail_png/Shaft_04495_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.4 mm and length at least 307.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 248.0 mm (from Z=0.0 to Z=248.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01448", "images": ["images/Shaft_01448.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 135.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.5 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00035", "images": ["images/Shaft_00035.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.3 mm and length at least 263.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 237.1 mm (from Z=0.0 to Z=237.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03168", "images": ["images/Shaft_03168.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.6 mm and length at least 152.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.6 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.6 mm over length 26.5 mm (from Z=0.0 to Z=117.0).\n9. Finish turn diameter Ø50.3 mm over length 90.5 mm (from Z=0.0 to Z=90.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03904", "images": ["images/Shaft_03904.png", "detail_png/Shaft_03904_length.png", "detail_png/Shaft_03904_diam.png", "detail_png/Shaft_03904_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.0 mm and length at least 262.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.9 mm (from Z=0.0 to Z=191.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00290", "images": ["images/Shaft_00290.png", "detail_png/Shaft_00290_length.png", "detail_png/Shaft_00290_diam.png", "detail_png/Shaft_00290_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.6 mm and length at least 212.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.3 mm over length 128.1 mm (from Z=0.0 to Z=156.3).\n10. Finish turn diameter Ø43.0 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00744", "images": ["images/Shaft_00744.png", "detail_png/Shaft_00744_length.png", "detail_png/Shaft_00744_diam.png", "detail_png/Shaft_00744_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.1 mm and length at least 318.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.5 mm over length 49.5 mm (from Z=0.0 to Z=256.9).\n10. Finish turn diameter Ø32.9 mm over length 49.0 mm (from Z=0.0 to Z=207.4).\n11. Finish turn diameter Ø30.0 mm over length 158.4 mm (from Z=0.0 to Z=158.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00150", "images": ["images/Shaft_00150.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.5 mm and length at least 281.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 201.6 mm (from Z=0.0 to Z=201.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04644", "images": ["images/Shaft_04644.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.3 mm and length at least 214.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.2 mm over length 57.2 mm (from Z=0.0 to Z=149.2).\n10. Finish turn diameter Ø40.1 mm over length 19.2 mm (from Z=0.0 to Z=92.0).\n11. Finish turn diameter Ø30.0 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02262", "images": ["images/Shaft_02262.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.7 mm and length at least 245.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.2 mm over length 76.4 mm (from Z=0.0 to Z=191.8).\n10. Finish turn diameter Ø44.2 mm over length 30.7 mm (from Z=0.0 to Z=115.4).\n11. Finish turn diameter Ø37.6 mm over length 19.1 mm (from Z=0.0 to Z=84.7).\n12. Finish turn diameter Ø33.5 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00224", "images": ["images/Shaft_00224.png", "detail_png/Shaft_00224_length.png", "detail_png/Shaft_00224_diam.png", "detail_png/Shaft_00224_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.4 mm and length at least 307.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.6 mm over length 76.6 mm (from Z=0.0 to Z=230.5).\n10. Finish turn diameter Ø30.0 mm over length 153.9 mm (from Z=0.0 to Z=153.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04386", "images": ["images/Shaft_04386.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.5 mm and length at least 212.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 127.9 mm (from Z=0.0 to Z=127.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00148", "images": ["images/Shaft_00148.png", "detail_png/Shaft_00148_length.png", "detail_png/Shaft_00148_diam.png", "detail_png/Shaft_00148_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.5 mm and length at least 189.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.4 mm over length 22.1 mm (from Z=0.0 to Z=140.6).\n9. Finish turn diameter Ø52.5 mm over length 68.3 mm (from Z=0.0 to Z=118.5).\n10. Finish turn diameter Ø40.8 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04480", "images": ["images/Shaft_04480.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.0 mm and length at least 69.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.9 mm over length 9.1 mm (from Z=0.0 to Z=59.6).\n9. Finish turn diameter Ø30.0 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04736", "images": ["images/Shaft_04736.png", "detail_png/Shaft_04736_length.png", "detail_png/Shaft_04736_diam.png", "detail_png/Shaft_04736_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.0 mm and length at least 133.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.1 mm over length 23.2 mm (from Z=0.0 to Z=116.6).\n9. Finish turn diameter Ø52.4 mm over length 37.2 mm (from Z=0.0 to Z=93.4).\n10. Finish turn diameter Ø42.2 mm over length 25.3 mm (from Z=0.0 to Z=56.2).\n11. Finish turn diameter Ø30.0 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03433", "images": ["images/Shaft_03433.png", "detail_png/Shaft_03433_length.png", "detail_png/Shaft_03433_diam.png", "detail_png/Shaft_03433_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 258.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 212.2 mm (from Z=0.0 to Z=212.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.5 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00894", "images": ["images/Shaft_00894.png", "detail_png/Shaft_00894_length.png", "detail_png/Shaft_00894_diam.png", "detail_png/Shaft_00894_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.7 mm and length at least 188.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 172.7 mm (from Z=0.0 to Z=172.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01106", "images": ["images/Shaft_01106.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 140.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 87.0 mm (from Z=0.0 to Z=87.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.1 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01624", "images": ["images/Shaft_01624.png", "detail_png/Shaft_01624_length.png", "detail_png/Shaft_01624_diam.png", "detail_png/Shaft_01624_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.4 mm and length at least 272.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.4 mm over length 73.1 mm (from Z=0.0 to Z=73.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.2 mm over length 20.2 mm (from Z=0.0 to Z=194.5).\n10. Finish turn diameter Ø40.2 mm over length 70.7 mm (from Z=0.0 to Z=174.3).\n11. Finish turn diameter Ø30.0 mm over length 103.6 mm (from Z=0.0 to Z=103.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03490", "images": ["images/Shaft_03490.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.1 mm and length at least 269.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 227.9 mm (from Z=0.0 to Z=227.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00712", "images": ["images/Shaft_00712.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 149.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 79.9 mm (from Z=0.0 to Z=79.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.8 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00845", "images": ["images/Shaft_00845.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 185.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 134.9 mm (from Z=0.0 to Z=134.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.9 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00679", "images": ["images/Shaft_00679.png", "detail_png/Shaft_00679_length.png", "detail_png/Shaft_00679_diam.png", "detail_png/Shaft_00679_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.0 mm and length at least 196.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.0 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.4 mm (from Z=0.0 to Z=132.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01381", "images": ["images/Shaft_01381.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.6 mm and length at least 153.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.7 mm (from Z=0.0 to Z=132.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02709", "images": ["images/Shaft_02709.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.2 mm and length at least 189.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.4 mm over length 44.2 mm (from Z=0.0 to Z=165.1).\n9. Finish turn diameter Ø63.5 mm over length 46.1 mm (from Z=0.0 to Z=120.9).\n10. Finish turn diameter Ø48.2 mm over length 43.7 mm (from Z=0.0 to Z=74.8).\n11. Finish turn diameter Ø30.2 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01652", "images": ["images/Shaft_01652.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.6 mm and length at least 90.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.6 mm over length 5.6 mm (from Z=0.0 to Z=80.3).\n9. Finish turn diameter Ø34.4 mm over length 22.2 mm (from Z=0.0 to Z=74.7).\n10. Finish turn diameter Ø30.0 mm over length 52.5 mm (from Z=0.0 to Z=52.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04537", "images": ["images/Shaft_04537.png", "detail_png/Shaft_04537_length.png", "detail_png/Shaft_04537_diam.png", "detail_png/Shaft_04537_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 280.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.3 mm (from Z=0.0 to Z=168.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.8 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00327", "images": ["images/Shaft_00327.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.6 mm and length at least 122.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.9 mm over length 29.7 mm (from Z=0.0 to Z=98.7).\n9. Finish turn diameter Ø30.0 mm over length 69.0 mm (from Z=0.0 to Z=69.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00998", "images": ["images/Shaft_00998.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.4 mm and length at least 312.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.4 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 270.4 mm (from Z=0.0 to Z=270.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03153", "images": ["images/Shaft_03153.png", "detail_png/Shaft_03153_length.png", "detail_png/Shaft_03153_diam.png", "detail_png/Shaft_03153_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.8 mm and length at least 190.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.3 mm over length 96.2 mm (from Z=0.0 to Z=141.7).\n9. Finish turn diameter Ø30.0 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03201", "images": ["images/Shaft_03201.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.1 mm and length at least 307.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 112.8 mm (from Z=0.0 to Z=112.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 189.6 mm (from Z=0.0 to Z=189.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04138", "images": ["images/Shaft_04138.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.4 mm and length at least 234.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 93.2 mm (from Z=0.0 to Z=93.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.0 mm (from Z=0.0 to Z=136.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01634", "images": ["images/Shaft_01634.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.0 mm and length at least 190.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.5 mm over length 38.3 mm (from Z=0.0 to Z=144.0).\n10. Finish turn diameter Ø30.0 mm over length 105.7 mm (from Z=0.0 to Z=105.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00063", "images": ["images/Shaft_00063.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.1 mm and length at least 138.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.6 mm over length 20.6 mm (from Z=0.0 to Z=109.6).\n9. Finish turn diameter Ø37.5 mm over length 42.8 mm (from Z=0.0 to Z=89.0).\n10. Finish turn diameter Ø30.0 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03630", "images": ["images/Shaft_03630.png", "detail_png/Shaft_03630_length.png", "detail_png/Shaft_03630_diam.png", "detail_png/Shaft_03630_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.1 mm and length at least 234.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.0 mm over length 12.5 mm (from Z=0.0 to Z=171.5).\n10. Finish turn diameter Ø37.5 mm over length 49.2 mm (from Z=0.0 to Z=159.0).\n11. Finish turn diameter Ø30.0 mm over length 109.8 mm (from Z=0.0 to Z=109.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01724", "images": ["images/Shaft_01724.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.8 mm and length at least 304.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.8 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.8 mm over length 66.8 mm (from Z=0.0 to Z=185.9).\n10. Finish turn diameter Ø53.7 mm over length 59.4 mm (from Z=0.0 to Z=119.1).\n11. Finish turn diameter Ø38.6 mm over length 59.7 mm (from Z=0.0 to Z=59.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01141", "images": ["images/Shaft_01141.png", "detail_png/Shaft_01141_length.png", "detail_png/Shaft_01141_diam.png", "detail_png/Shaft_01141_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.6 mm and length at least 288.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.5 mm over length 168.5 mm (from Z=0.0 to Z=250.6).\n10. Finish turn diameter Ø35.9 mm over length 82.1 mm (from Z=0.0 to Z=82.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00389", "images": ["images/Shaft_00389.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.5 mm and length at least 242.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.4 mm over length 57.0 mm (from Z=0.0 to Z=222.8).\n10. Finish turn diameter Ø47.5 mm over length 38.6 mm (from Z=0.0 to Z=165.8).\n11. Finish turn diameter Ø38.1 mm over length 49.8 mm (from Z=0.0 to Z=127.2).\n12. Finish turn diameter Ø30.0 mm over length 77.4 mm (from Z=0.0 to Z=77.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03000", "images": ["images/Shaft_03000.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.8 mm and length at least 205.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.0 mm over length 66.2 mm (from Z=0.0 to Z=149.9).\n10. Finish turn diameter Ø44.2 mm over length 9.1 mm (from Z=0.0 to Z=83.7).\n11. Finish turn diameter Ø31.6 mm over length 14.3 mm (from Z=0.0 to Z=74.6).\n12. Finish turn diameter Ø30.0 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04051", "images": ["images/Shaft_04051.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.3 mm and length at least 317.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.0 mm over length 126.6 mm (from Z=0.0 to Z=261.5).\n10. Finish turn diameter Ø30.0 mm over length 134.9 mm (from Z=0.0 to Z=134.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03691", "images": ["images/Shaft_03691.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.8 mm and length at least 94.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.0 mm (from Z=0.0 to Z=82.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00973", "images": ["images/Shaft_00973.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.2 mm and length at least 215.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 147.5 mm (from Z=0.0 to Z=147.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.8 mm over length 24.2 mm (from Z=0.0 to Z=62.5).\n10. Finish turn diameter Ø33.6 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04742", "images": ["images/Shaft_04742.png", "detail_png/Shaft_04742_length.png", "detail_png/Shaft_04742_diam.png", "detail_png/Shaft_04742_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 177.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 143.4 mm (from Z=0.0 to Z=143.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.3 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04220", "images": ["images/Shaft_04220.png", "detail_png/Shaft_04220_length.png", "detail_png/Shaft_04220_diam.png", "detail_png/Shaft_04220_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 90.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.7 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02582", "images": ["images/Shaft_02582.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.2 mm and length at least 222.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 176.7 mm (from Z=0.0 to Z=176.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02213", "images": ["images/Shaft_02213.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.0 mm and length at least 298.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 154.1 mm (from Z=0.0 to Z=154.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 139.7 mm (from Z=0.0 to Z=139.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01869", "images": ["images/Shaft_01869.png", "detail_png/Shaft_01869_length.png", "detail_png/Shaft_01869_diam.png", "detail_png/Shaft_01869_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.3 mm and length at least 80.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.8 mm over length 17.0 mm (from Z=0.0 to Z=61.7).\n9. Finish turn diameter Ø48.5 mm over length 13.8 mm (from Z=0.0 to Z=44.7).\n10. Finish turn diameter Ø40.7 mm over length 11.7 mm (from Z=0.0 to Z=30.9).\n11. Finish turn diameter Ø30.0 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04785", "images": ["images/Shaft_04785.png", "detail_png/Shaft_04785_length.png", "detail_png/Shaft_04785_diam.png", "detail_png/Shaft_04785_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.2 mm and length at least 297.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.2 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 47.4 mm (from Z=0.0 to Z=270.4).\n10. Finish turn diameter Ø30.0 mm over length 223.0 mm (from Z=0.0 to Z=223.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01955", "images": ["images/Shaft_01955.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.4 mm and length at least 293.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.9 mm over length 113.0 mm (from Z=0.0 to Z=267.0).\n10. Finish turn diameter Ø43.3 mm over length 32.8 mm (from Z=0.0 to Z=154.0).\n11. Finish turn diameter Ø35.6 mm over length 121.2 mm (from Z=0.0 to Z=121.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00297", "images": ["images/Shaft_00297.png", "detail_png/Shaft_00297_length.png", "detail_png/Shaft_00297_diam.png", "detail_png/Shaft_00297_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.8 mm and length at least 218.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 74.1 mm (from Z=0.0 to Z=153.9).\n10. Finish turn diameter Ø54.2 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00782", "images": ["images/Shaft_00782.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.6 mm and length at least 220.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 61.8 mm (from Z=0.0 to Z=61.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 36.6 mm (from Z=0.0 to Z=153.6).\n10. Finish turn diameter Ø30.0 mm over length 117.0 mm (from Z=0.0 to Z=117.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00920", "images": ["images/Shaft_00920.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.5 mm and length at least 101.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.5 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.5 mm over length 5.4 mm (from Z=0.0 to Z=63.3).\n9. Finish turn diameter Ø30.0 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03350", "images": ["images/Shaft_03350.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.6 mm and length at least 193.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.1 mm over length 70.1 mm (from Z=0.0 to Z=153.8).\n9. Finish turn diameter Ø30.0 mm over length 83.7 mm (from Z=0.0 to Z=83.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04266", "images": ["images/Shaft_04266.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.3 mm and length at least 80.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 9.3 mm (from Z=0.0 to Z=58.4).\n9. Finish turn diameter Ø39.7 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03740", "images": ["images/Shaft_03740.png", "detail_png/Shaft_03740_length.png", "detail_png/Shaft_03740_diam.png", "detail_png/Shaft_03740_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.1 mm and length at least 81.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.4 mm over length 11.0 mm (from Z=0.0 to Z=61.6).\n9. Finish turn diameter Ø48.5 mm over length 15.3 mm (from Z=0.0 to Z=50.6).\n10. Finish turn diameter Ø36.8 mm over length 7.2 mm (from Z=0.0 to Z=35.3).\n11. Finish turn diameter Ø30.0 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03123", "images": ["images/Shaft_03123.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 140.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 98.2 mm (from Z=0.0 to Z=98.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.4 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03171", "images": ["images/Shaft_03171.png", "detail_png/Shaft_03171_length.png", "detail_png/Shaft_03171_diam.png", "detail_png/Shaft_03171_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.8 mm and length at least 234.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 185.8 mm (from Z=0.0 to Z=185.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02718", "images": ["images/Shaft_02718.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.3 mm and length at least 282.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 182.8 mm (from Z=0.0 to Z=182.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04490", "images": ["images/Shaft_04490.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.8 mm and length at least 286.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 78.4 mm (from Z=0.0 to Z=78.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø75.9 mm over length 52.5 mm (from Z=0.0 to Z=202.8).\n10. Finish turn diameter Ø67.8 mm over length 150.3 mm (from Z=0.0 to Z=150.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03715", "images": ["images/Shaft_03715.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.3 mm and length at least 207.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 50.9 mm (from Z=0.0 to Z=50.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 151.1 mm (from Z=0.0 to Z=151.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01084", "images": ["images/Shaft_01084.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.9 mm and length at least 193.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.8 mm over length 101.7 mm (from Z=0.0 to Z=176.4).\n9. Finish turn diameter Ø30.0 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00866", "images": ["images/Shaft_00866.png", "detail_png/Shaft_00866_length.png", "detail_png/Shaft_00866_diam.png", "detail_png/Shaft_00866_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.2 mm and length at least 114.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 68.0 mm (from Z=0.0 to Z=68.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01012", "images": ["images/Shaft_01012.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.4 mm and length at least 129.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.4 mm over length 8.4 mm (from Z=0.0 to Z=8.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.6 mm over length 16.7 mm (from Z=0.0 to Z=116.5).\n9. Finish turn diameter Ø38.7 mm over length 58.8 mm (from Z=0.0 to Z=99.8).\n10. Finish turn diameter Ø31.4 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02645", "images": ["images/Shaft_02645.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.1 mm and length at least 276.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.1 mm over length 90.9 mm (from Z=0.0 to Z=90.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 41.4 mm (from Z=0.0 to Z=180.1).\n10. Finish turn diameter Ø30.0 mm over length 138.7 mm (from Z=0.0 to Z=138.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00615", "images": ["images/Shaft_00615.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.2 mm and length at least 294.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.7 mm over length 46.1 mm (from Z=0.0 to Z=276.1).\n10. Finish turn diameter Ø36.8 mm over length 14.6 mm (from Z=0.0 to Z=230.0).\n11. Finish turn diameter Ø30.0 mm over length 215.4 mm (from Z=0.0 to Z=215.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01347", "images": ["images/Shaft_01347.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.1 mm and length at least 81.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.1 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.2 mm over length 13.6 mm (from Z=0.0 to Z=53.1).\n9. Finish turn diameter Ø30.0 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03087", "images": ["images/Shaft_03087.png", "detail_png/Shaft_03087_length.png", "detail_png/Shaft_03087_diam.png", "detail_png/Shaft_03087_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.6 mm and length at least 226.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.6 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.9 mm over length 19.7 mm (from Z=0.0 to Z=175.0).\n10. Finish turn diameter Ø52.5 mm over length 51.1 mm (from Z=0.0 to Z=155.3).\n11. Finish turn diameter Ø39.2 mm over length 49.8 mm (from Z=0.0 to Z=104.2).\n12. Finish turn diameter Ø30.0 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00340", "images": ["images/Shaft_00340.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.1 mm and length at least 194.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.8 mm over length 135.0 mm (from Z=0.0 to Z=162.2).\n10. Finish turn diameter Ø32.9 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04092", "images": ["images/Shaft_04092.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.6 mm and length at least 160.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 134.8 mm (from Z=0.0 to Z=134.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04027", "images": ["images/Shaft_04027.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.4 mm and length at least 230.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 99.1 mm (from Z=0.0 to Z=174.3).\n10. Finish turn diameter Ø30.0 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03253", "images": ["images/Shaft_03253.png", "detail_png/Shaft_03253_length.png", "detail_png/Shaft_03253_diam.png", "detail_png/Shaft_03253_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.6 mm and length at least 90.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.6 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 18.3 mm (from Z=0.0 to Z=64.8).\n9. Finish turn diameter Ø34.9 mm over length 5.0 mm (from Z=0.0 to Z=46.5).\n10. Finish turn diameter Ø30.0 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02507", "images": ["images/Shaft_02507.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.6 mm and length at least 281.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 27.2 mm (from Z=0.0 to Z=261.0).\n10. Finish turn diameter Ø37.8 mm over length 72.2 mm (from Z=0.0 to Z=233.8).\n11. Finish turn diameter Ø30.0 mm over length 161.6 mm (from Z=0.0 to Z=161.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01206", "images": ["images/Shaft_01206.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.7 mm and length at least 277.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.7 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.7 mm over length 38.6 mm (from Z=0.0 to Z=246.5).\n10. Finish turn diameter Ø52.1 mm over length 15.5 mm (from Z=0.0 to Z=207.9).\n11. Finish turn diameter Ø43.2 mm over length 77.1 mm (from Z=0.0 to Z=192.4).\n12. Finish turn diameter Ø30.0 mm over length 115.3 mm (from Z=0.0 to Z=115.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03356", "images": ["images/Shaft_03356.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 75.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.1 mm over length 9.8 mm (from Z=0.0 to Z=9.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02635", "images": ["images/Shaft_02635.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.9 mm and length at least 171.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 128.6 mm (from Z=0.0 to Z=128.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00759", "images": ["images/Shaft_00759.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 77.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.1 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01870", "images": ["images/Shaft_01870.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.6 mm and length at least 85.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.8 mm over length 11.3 mm (from Z=0.0 to Z=72.8).\n9. Finish turn diameter Ø53.6 mm over length 28.0 mm (from Z=0.0 to Z=61.5).\n10. Finish turn diameter Ø34.1 mm over length 16.4 mm (from Z=0.0 to Z=33.5).\n11. Finish turn diameter Ø30.0 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01176", "images": ["images/Shaft_01176.png", "detail_png/Shaft_01176_length.png", "detail_png/Shaft_01176_diam.png", "detail_png/Shaft_01176_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.5 mm and length at least 126.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.7 mm over length 28.9 mm (from Z=0.0 to Z=103.8).\n9. Finish turn diameter Ø30.0 mm over length 74.9 mm (from Z=0.0 to Z=74.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00807", "images": ["images/Shaft_00807.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.9 mm and length at least 321.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.9 mm over length 60.8 mm (from Z=0.0 to Z=60.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 85.8 mm (from Z=0.0 to Z=256.0).\n10. Finish turn diameter Ø40.5 mm over length 29.9 mm (from Z=0.0 to Z=170.2).\n11. Finish turn diameter Ø30.0 mm over length 140.3 mm (from Z=0.0 to Z=140.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03393", "images": ["images/Shaft_03393.png", "detail_png/Shaft_03393_length.png", "detail_png/Shaft_03393_diam.png", "detail_png/Shaft_03393_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.8 mm and length at least 100.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.7 mm over length 6.6 mm (from Z=0.0 to Z=87.6).\n9. Finish turn diameter Ø30.0 mm over length 81.0 mm (from Z=0.0 to Z=81.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03178", "images": ["images/Shaft_03178.png", "detail_png/Shaft_03178_length.png", "detail_png/Shaft_03178_diam.png", "detail_png/Shaft_03178_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.7 mm and length at least 187.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.1 mm over length 63.1 mm (from Z=0.0 to Z=138.6).\n9. Finish turn diameter Ø48.8 mm over length 17.8 mm (from Z=0.0 to Z=75.5).\n10. Finish turn diameter Ø35.0 mm over length 12.9 mm (from Z=0.0 to Z=57.7).\n11. Finish turn diameter Ø30.0 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01269", "images": ["images/Shaft_01269.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 104.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 82.9 mm (from Z=0.0 to Z=82.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.8 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03928", "images": ["images/Shaft_03928.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.5 mm and length at least 102.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03673", "images": ["images/Shaft_03673.png", "detail_png/Shaft_03673_length.png", "detail_png/Shaft_03673_diam.png", "detail_png/Shaft_03673_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 72.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.6 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03258", "images": ["images/Shaft_03258.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.2 mm and length at least 214.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.0 mm over length 37.8 mm (from Z=0.0 to Z=192.3).\n10. Finish turn diameter Ø37.9 mm over length 39.6 mm (from Z=0.0 to Z=154.5).\n11. Finish turn diameter Ø31.7 mm over length 43.6 mm (from Z=0.0 to Z=114.9).\n12. Finish turn diameter Ø30.0 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02647", "images": ["images/Shaft_02647.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.6 mm and length at least 121.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.6 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 58.2 mm (from Z=0.0 to Z=105.4).\n9. Finish turn diameter Ø30.0 mm over length 47.2 mm (from Z=0.0 to Z=47.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02269", "images": ["images/Shaft_02269.png", "detail_png/Shaft_02269_length.png", "detail_png/Shaft_02269_diam.png", "detail_png/Shaft_02269_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.1 mm and length at least 94.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø76.0 mm over length 19.4 mm (from Z=0.0 to Z=62.9).\n9. Finish turn diameter Ø69.3 mm over length 21.5 mm (from Z=0.0 to Z=43.5).\n10. Finish turn diameter Ø63.0 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01437", "images": ["images/Shaft_01437.png", "detail_png/Shaft_01437_length.png", "detail_png/Shaft_01437_diam.png", "detail_png/Shaft_01437_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.7 mm and length at least 248.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.5 mm over length 63.0 mm (from Z=0.0 to Z=219.2).\n10. Finish turn diameter Ø58.4 mm over length 55.0 mm (from Z=0.0 to Z=156.2).\n11. Finish turn diameter Ø54.5 mm over length 38.5 mm (from Z=0.0 to Z=101.2).\n12. Finish turn diameter Ø40.9 mm over length 41.7 mm (from Z=0.0 to Z=62.7).\n13. Finish turn diameter Ø30.0 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01900", "images": ["images/Shaft_01900.png", "detail_png/Shaft_01900_length.png", "detail_png/Shaft_01900_diam.png", "detail_png/Shaft_01900_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.8 mm and length at least 194.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.8 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.9 mm over length 21.0 mm (from Z=0.0 to Z=176.4).\n9. Finish turn diameter Ø50.4 mm over length 52.1 mm (from Z=0.0 to Z=155.4).\n10. Finish turn diameter Ø41.4 mm over length 34.6 mm (from Z=0.0 to Z=103.3).\n11. Finish turn diameter Ø34.0 mm over length 12.9 mm (from Z=0.0 to Z=68.7).\n12. Finish turn diameter Ø30.0 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04242", "images": ["images/Shaft_04242.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.9 mm and length at least 241.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.7 mm over length 42.4 mm (from Z=0.0 to Z=177.6).\n10. Finish turn diameter Ø61.5 mm over length 91.4 mm (from Z=0.0 to Z=135.2).\n11. Finish turn diameter Ø42.7 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00108", "images": ["images/Shaft_00108.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.5 mm and length at least 110.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 51.3 mm (from Z=0.0 to Z=89.4).\n9. Finish turn diameter Ø36.2 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03165", "images": ["images/Shaft_03165.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.7 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.7 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.8 mm over length 21.2 mm (from Z=0.0 to Z=105.5).\n9. Finish turn diameter Ø30.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01329", "images": ["images/Shaft_01329.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.1 mm and length at least 120.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 54.3 mm (from Z=0.0 to Z=54.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.1 mm over length 32.6 mm (from Z=0.0 to Z=61.2).\n9. Finish turn diameter Ø60.9 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03061", "images": ["images/Shaft_03061.png", "detail_png/Shaft_03061_length.png", "detail_png/Shaft_03061_diam.png", "detail_png/Shaft_03061_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 70.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.7 mm over length 5.7 mm (from Z=0.0 to Z=5.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03690", "images": ["images/Shaft_03690.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 224.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.6 mm (from Z=0.0 to Z=147.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.5 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00943", "images": ["images/Shaft_00943.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.3 mm and length at least 137.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.6 mm over length 25.9 mm (from Z=0.0 to Z=125.1).\n10. Finish turn diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03868", "images": ["images/Shaft_03868.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.9 mm and length at least 315.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 262.8 mm (from Z=0.0 to Z=262.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02978", "images": ["images/Shaft_02978.png", "detail_png/Shaft_02978_length.png", "detail_png/Shaft_02978_diam.png", "detail_png/Shaft_02978_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 228.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 217.5 mm (from Z=0.0 to Z=217.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 5.6 mm (from Z=0.0 to Z=5.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02610", "images": ["images/Shaft_02610.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.2 mm and length at least 297.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 136.8 mm (from Z=0.0 to Z=218.4).\n10. Finish turn diameter Ø30.0 mm over length 81.6 mm (from Z=0.0 to Z=81.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02600", "images": ["images/Shaft_02600.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.3 mm and length at least 186.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.7 mm over length 25.2 mm (from Z=0.0 to Z=153.1).\n9. Finish turn diameter Ø48.6 mm over length 62.8 mm (from Z=0.0 to Z=127.9).\n10. Finish turn diameter Ø30.2 mm over length 38.5 mm (from Z=0.0 to Z=65.1).\n11. Finish turn diameter Ø30.0 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01019", "images": ["images/Shaft_01019.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 295.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 204.4 mm (from Z=0.0 to Z=204.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 86.5 mm (from Z=0.0 to Z=86.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02719", "images": ["images/Shaft_02719.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 139.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.6 mm over length 62.9 mm (from Z=0.0 to Z=62.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02680", "images": ["images/Shaft_02680.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.4 mm and length at least 219.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.8 mm over length 37.2 mm (from Z=0.0 to Z=170.5).\n10. Finish turn diameter Ø44.3 mm over length 85.8 mm (from Z=0.0 to Z=133.3).\n11. Finish turn diameter Ø30.0 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02662", "images": ["images/Shaft_02662.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 271.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 104.3 mm (from Z=0.0 to Z=104.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 161.9 mm (from Z=0.0 to Z=161.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00958", "images": ["images/Shaft_00958.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.2 mm and length at least 303.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.6 mm over length 142.7 mm (from Z=0.0 to Z=253.3).\n10. Finish turn diameter Ø40.7 mm over length 50.5 mm (from Z=0.0 to Z=110.6).\n11. Finish turn diameter Ø32.0 mm over length 22.8 mm (from Z=0.0 to Z=60.1).\n12. Finish turn diameter Ø30.0 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01483", "images": ["images/Shaft_01483.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.0 mm and length at least 99.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.3 mm over length 49.3 mm (from Z=0.0 to Z=89.7).\n9. Finish turn diameter Ø51.9 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01960", "images": ["images/Shaft_01960.png", "detail_png/Shaft_01960_length.png", "detail_png/Shaft_01960_diam.png", "detail_png/Shaft_01960_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.6 mm and length at least 143.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.0 mm over length 14.0 mm (from Z=0.0 to Z=103.6).\n9. Finish turn diameter Ø49.2 mm over length 37.5 mm (from Z=0.0 to Z=89.6).\n10. Finish turn diameter Ø44.2 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02792", "images": ["images/Shaft_02792.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.8 mm and length at least 283.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.3 mm over length 53.9 mm (from Z=0.0 to Z=233.0).\n10. Finish turn diameter Ø50.8 mm over length 105.7 mm (from Z=0.0 to Z=179.1).\n11. Finish turn diameter Ø31.7 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03259", "images": ["images/Shaft_03259.png", "detail_png/Shaft_03259_length.png", "detail_png/Shaft_03259_diam.png", "detail_png/Shaft_03259_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.3 mm and length at least 204.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.5 mm over length 27.1 mm (from Z=0.0 to Z=136.6).\n10. Finish turn diameter Ø31.5 mm over length 29.8 mm (from Z=0.0 to Z=109.5).\n11. Finish turn diameter Ø30.0 mm over length 79.7 mm (from Z=0.0 to Z=79.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02097", "images": ["images/Shaft_02097.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 175.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.1 mm (from Z=0.0 to Z=141.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.2 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04605", "images": ["images/Shaft_04605.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.7 mm and length at least 317.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 139.8 mm (from Z=0.0 to Z=139.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.2 mm over length 82.0 mm (from Z=0.0 to Z=172.9).\n10. Finish turn diameter Ø45.4 mm over length 90.9 mm (from Z=0.0 to Z=90.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04846", "images": ["images/Shaft_04846.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.4 mm and length at least 247.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.3 mm over length 60.1 mm (from Z=0.0 to Z=176.3).\n10. Finish turn diameter Ø30.0 mm over length 116.2 mm (from Z=0.0 to Z=116.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04431", "images": ["images/Shaft_04431.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.6 mm and length at least 247.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 73.3 mm (from Z=0.0 to Z=73.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.1 mm (from Z=0.0 to Z=169.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02367", "images": ["images/Shaft_02367.png", "detail_png/Shaft_02367_length.png", "detail_png/Shaft_02367_diam.png", "detail_png/Shaft_02367_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 106.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 81.1 mm (from Z=0.0 to Z=81.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.7 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03449", "images": ["images/Shaft_03449.png", "detail_png/Shaft_03449_length.png", "detail_png/Shaft_03449_diam.png", "detail_png/Shaft_03449_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.7 mm and length at least 149.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.7 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.2 mm (from Z=0.0 to Z=111.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02258", "images": ["images/Shaft_02258.png", "detail_png/Shaft_02258_length.png", "detail_png/Shaft_02258_diam.png", "detail_png/Shaft_02258_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.9 mm and length at least 83.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.7 mm over length 11.5 mm (from Z=0.0 to Z=66.6).\n9. Finish turn diameter Ø41.7 mm over length 12.8 mm (from Z=0.0 to Z=55.1).\n10. Finish turn diameter Ø30.0 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04519", "images": ["images/Shaft_04519.png", "detail_png/Shaft_04519_length.png", "detail_png/Shaft_04519_diam.png", "detail_png/Shaft_04519_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.1 mm and length at least 77.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.0 mm over length 5.0 mm (from Z=0.0 to Z=52.6).\n9. Finish turn diameter Ø49.0 mm over length 5.0 mm (from Z=0.0 to Z=47.6).\n10. Finish turn diameter Ø39.8 mm over length 12.6 mm (from Z=0.0 to Z=42.6).\n11. Finish turn diameter Ø34.9 mm over length 13.4 mm (from Z=0.0 to Z=30.0).\n12. Finish turn diameter Ø30.0 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02150", "images": ["images/Shaft_02150.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.7 mm and length at least 160.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 15.6 mm (from Z=0.0 to Z=15.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.0 mm over length 20.4 mm (from Z=0.0 to Z=139.5).\n10. Finish turn diameter Ø30.0 mm over length 119.1 mm (from Z=0.0 to Z=119.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02732", "images": ["images/Shaft_02732.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.6 mm and length at least 178.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.6 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 146.7 mm (from Z=0.0 to Z=146.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03408", "images": ["images/Shaft_03408.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.7 mm and length at least 142.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.9 mm over length 32.1 mm (from Z=0.0 to Z=109.6).\n9. Finish turn diameter Ø50.0 mm over length 14.8 mm (from Z=0.0 to Z=77.5).\n10. Finish turn diameter Ø33.9 mm over length 30.9 mm (from Z=0.0 to Z=62.7).\n11. Finish turn diameter Ø30.0 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03174", "images": ["images/Shaft_03174.png", "detail_png/Shaft_03174_length.png", "detail_png/Shaft_03174_diam.png", "detail_png/Shaft_03174_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.9 mm and length at least 236.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.3 mm over length 29.7 mm (from Z=0.0 to Z=221.4).\n10. Finish turn diameter Ø30.0 mm over length 191.7 mm (from Z=0.0 to Z=191.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04588", "images": ["images/Shaft_04588.png", "detail_png/Shaft_04588_length.png", "detail_png/Shaft_04588_diam.png", "detail_png/Shaft_04588_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 214.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 183.1 mm (from Z=0.0 to Z=183.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.4 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01121", "images": ["images/Shaft_01121.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 264.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.8 mm (from Z=0.0 to Z=141.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.1 mm over length 117.5 mm (from Z=0.0 to Z=117.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03897", "images": ["images/Shaft_03897.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.5 mm and length at least 67.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.0 mm over length 30.4 mm (from Z=0.0 to Z=47.6).\n9. Finish turn diameter Ø45.0 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00853", "images": ["images/Shaft_00853.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 279.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.4 mm (from Z=0.0 to Z=221.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.0 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01193", "images": ["images/Shaft_01193.png", "detail_png/Shaft_01193_length.png", "detail_png/Shaft_01193_diam.png", "detail_png/Shaft_01193_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø82.0 mm and length at least 155.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø80.0 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø80.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 24.1 mm (from Z=0.0 to Z=96.4).\n9. Finish turn diameter Ø43.6 mm over length 55.8 mm (from Z=0.0 to Z=72.3).\n10. Finish turn diameter Ø34.4 mm over length 9.1 mm (from Z=0.0 to Z=16.5).\n11. Finish turn diameter Ø30.0 mm over length 7.4 mm (from Z=0.0 to Z=7.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02295", "images": ["images/Shaft_02295.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.9 mm and length at least 300.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 76.2 mm (from Z=0.0 to Z=76.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.3 mm over length 14.9 mm (from Z=0.0 to Z=218.8).\n10. Finish turn diameter Ø44.9 mm over length 33.4 mm (from Z=0.0 to Z=203.9).\n11. Finish turn diameter Ø30.0 mm over length 170.5 mm (from Z=0.0 to Z=170.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03753", "images": ["images/Shaft_03753.png", "detail_png/Shaft_03753_length.png", "detail_png/Shaft_03753_diam.png", "detail_png/Shaft_03753_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 81.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.3 mm over length 5.7 mm (from Z=0.0 to Z=5.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00438", "images": ["images/Shaft_00438.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.8 mm and length at least 317.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.8 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 104.0 mm (from Z=0.0 to Z=187.0).\n10. Finish turn diameter Ø43.7 mm over length 83.0 mm (from Z=0.0 to Z=83.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01683", "images": ["images/Shaft_01683.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.8 mm and length at least 204.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 113.1 mm (from Z=0.0 to Z=113.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 86.1 mm (from Z=0.0 to Z=86.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03872", "images": ["images/Shaft_03872.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.5 mm and length at least 65.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.7 mm over length 16.8 mm (from Z=0.0 to Z=32.6).\n9. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04954", "images": ["images/Shaft_04954.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.5 mm and length at least 126.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03599", "images": ["images/Shaft_03599.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.3 mm and length at least 169.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.3 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.2 mm (from Z=0.0 to Z=111.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02603", "images": ["images/Shaft_02603.png", "detail_png/Shaft_02603_length.png", "detail_png/Shaft_02603_diam.png", "detail_png/Shaft_02603_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.2 mm and length at least 219.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.6 mm over length 39.2 mm (from Z=0.0 to Z=175.5).\n10. Finish turn diameter Ø32.7 mm over length 5.7 mm (from Z=0.0 to Z=136.3).\n11. Finish turn diameter Ø30.0 mm over length 130.6 mm (from Z=0.0 to Z=130.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02488", "images": ["images/Shaft_02488.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.7 mm and length at least 323.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 258.0 mm (from Z=0.0 to Z=258.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00621", "images": ["images/Shaft_00621.png", "detail_png/Shaft_00621_length.png", "detail_png/Shaft_00621_diam.png", "detail_png/Shaft_00621_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.1 mm and length at least 198.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.3 mm over length 58.7 mm (from Z=0.0 to Z=171.8).\n10. Finish turn diameter Ø40.7 mm over length 48.5 mm (from Z=0.0 to Z=113.1).\n11. Finish turn diameter Ø30.0 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02164", "images": ["images/Shaft_02164.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.5 mm and length at least 170.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 54.4 mm (from Z=0.0 to Z=98.6).\n9. Finish turn diameter Ø39.7 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02460", "images": ["images/Shaft_02460.png", "detail_png/Shaft_02460_length.png", "detail_png/Shaft_02460_diam.png", "detail_png/Shaft_02460_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.6 mm and length at least 151.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.4 mm over length 33.7 mm (from Z=0.0 to Z=133.7).\n10. Finish turn diameter Ø30.0 mm over length 100.0 mm (from Z=0.0 to Z=100.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00694", "images": ["images/Shaft_00694.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.0 mm and length at least 203.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 59.6 mm (from Z=0.0 to Z=59.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.6 mm over length 87.3 mm (from Z=0.0 to Z=139.1).\n10. Finish turn diameter Ø43.2 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04330", "images": ["images/Shaft_04330.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.1 mm and length at least 259.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 246.1 mm (from Z=0.0 to Z=246.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04840", "images": ["images/Shaft_04840.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 257.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 211.9 mm (from Z=0.0 to Z=211.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.4 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00046", "images": ["images/Shaft_00046.png", "detail_png/Shaft_00046_length.png", "detail_png/Shaft_00046_diam.png", "detail_png/Shaft_00046_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 143.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 123.7 mm (from Z=0.0 to Z=123.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.4 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02047", "images": ["images/Shaft_02047.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.3 mm and length at least 208.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.3 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.1 mm over length 57.3 mm (from Z=0.0 to Z=156.8).\n10. Finish turn diameter Ø34.6 mm over length 9.8 mm (from Z=0.0 to Z=99.5).\n11. Finish turn diameter Ø30.0 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00648", "images": ["images/Shaft_00648.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.3 mm and length at least 112.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.2 mm over length 19.8 mm (from Z=0.0 to Z=59.7).\n9. Finish turn diameter Ø30.0 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04792", "images": ["images/Shaft_04792.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.3 mm and length at least 196.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 100.6 mm (from Z=0.0 to Z=100.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 91.3 mm (from Z=0.0 to Z=91.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00329", "images": ["images/Shaft_00329.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 308.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 158.0 mm (from Z=0.0 to Z=158.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.7 mm over length 145.0 mm (from Z=0.0 to Z=145.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00653", "images": ["images/Shaft_00653.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 152.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 102.6 mm (from Z=0.0 to Z=102.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03798", "images": ["images/Shaft_03798.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.4 mm and length at least 307.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.7 mm over length 10.6 mm (from Z=0.0 to Z=284.6).\n10. Finish turn diameter Ø40.1 mm over length 100.4 mm (from Z=0.0 to Z=274.0).\n11. Finish turn diameter Ø30.0 mm over length 173.6 mm (from Z=0.0 to Z=173.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03927", "images": ["images/Shaft_03927.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.4 mm and length at least 307.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 100.4 mm (from Z=0.0 to Z=235.4).\n10. Finish turn diameter Ø51.4 mm over length 135.0 mm (from Z=0.0 to Z=135.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03709", "images": ["images/Shaft_03709.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.4 mm and length at least 175.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 38.6 mm (from Z=0.0 to Z=126.4).\n9. Finish turn diameter Ø50.8 mm over length 70.7 mm (from Z=0.0 to Z=87.8).\n10. Finish turn diameter Ø33.2 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00423", "images": ["images/Shaft_00423.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø34.8 mm and length at least 249.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.8 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.0 mm (from Z=0.0 to Z=191.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03646", "images": ["images/Shaft_03646.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.1 mm and length at least 228.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.9 mm over length 35.0 mm (from Z=0.0 to Z=181.9).\n10. Finish turn diameter Ø30.8 mm over length 50.8 mm (from Z=0.0 to Z=146.9).\n11. Finish turn diameter Ø30.0 mm over length 96.1 mm (from Z=0.0 to Z=96.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04689", "images": ["images/Shaft_04689.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.8 mm and length at least 162.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.4 mm over length 41.1 mm (from Z=0.0 to Z=146.6).\n9. Finish turn diameter Ø39.5 mm over length 33.0 mm (from Z=0.0 to Z=105.5).\n10. Finish turn diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02351", "images": ["images/Shaft_02351.png", "detail_png/Shaft_02351_length.png", "detail_png/Shaft_02351_diam.png", "detail_png/Shaft_02351_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.5 mm and length at least 161.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 31.2 mm (from Z=0.0 to Z=129.7).\n10. Finish turn diameter Ø30.0 mm over length 98.5 mm (from Z=0.0 to Z=98.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03297", "images": ["images/Shaft_03297.png", "detail_png/Shaft_03297_length.png", "detail_png/Shaft_03297_diam.png", "detail_png/Shaft_03297_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.9 mm and length at least 224.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.0 mm over length 15.0 mm (from Z=0.0 to Z=159.1).\n10. Finish turn diameter Ø36.5 mm over length 27.6 mm (from Z=0.0 to Z=144.1).\n11. Finish turn diameter Ø30.0 mm over length 116.5 mm (from Z=0.0 to Z=116.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03694", "images": ["images/Shaft_03694.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 287.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 219.1 mm (from Z=0.0 to Z=219.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.5 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04298", "images": ["images/Shaft_04298.png", "detail_png/Shaft_04298_length.png", "detail_png/Shaft_04298_diam.png", "detail_png/Shaft_04298_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.8 mm and length at least 275.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.8 mm over length 57.4 mm (from Z=0.0 to Z=210.5).\n10. Finish turn diameter Ø39.9 mm over length 43.4 mm (from Z=0.0 to Z=153.1).\n11. Finish turn diameter Ø30.0 mm over length 109.7 mm (from Z=0.0 to Z=109.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01765", "images": ["images/Shaft_01765.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 114.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 92.6 mm (from Z=0.0 to Z=92.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.8 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04313", "images": ["images/Shaft_04313.png", "detail_png/Shaft_04313_length.png", "detail_png/Shaft_04313_diam.png", "detail_png/Shaft_04313_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.6 mm and length at least 307.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 134.7 mm (from Z=0.0 to Z=215.1).\n10. Finish turn diameter Ø64.4 mm over length 80.4 mm (from Z=0.0 to Z=80.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04087", "images": ["images/Shaft_04087.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.9 mm and length at least 249.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 93.5 mm (from Z=0.0 to Z=93.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.9 mm over length 23.7 mm (from Z=0.0 to Z=151.0).\n10. Finish turn diameter Ø45.1 mm over length 65.8 mm (from Z=0.0 to Z=127.3).\n11. Finish turn diameter Ø30.0 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00891", "images": ["images/Shaft_00891.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.6 mm and length at least 171.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.0 mm over length 29.9 mm (from Z=0.0 to Z=140.2).\n9. Finish turn diameter Ø43.7 mm over length 41.8 mm (from Z=0.0 to Z=110.3).\n10. Finish turn diameter Ø30.0 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03837", "images": ["images/Shaft_03837.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.1 mm and length at least 141.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.1 mm over length 18.8 mm (from Z=0.0 to Z=97.5).\n9. Finish turn diameter Ø49.5 mm over length 22.4 mm (from Z=0.0 to Z=78.7).\n10. Finish turn diameter Ø38.1 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02100", "images": ["images/Shaft_02100.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.1 mm and length at least 275.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 111.0 mm (from Z=0.0 to Z=221.7).\n10. Finish turn diameter Ø50.2 mm over length 110.7 mm (from Z=0.0 to Z=110.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01537", "images": ["images/Shaft_01537.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.6 mm and length at least 152.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 80.7 mm (from Z=0.0 to Z=80.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.0 mm over length 16.8 mm (from Z=0.0 to Z=67.1).\n9. Finish turn diameter Ø47.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00125", "images": ["images/Shaft_00125.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.9 mm and length at least 135.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.7 mm (from Z=0.0 to Z=105.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02988", "images": ["images/Shaft_02988.png", "detail_png/Shaft_02988_length.png", "detail_png/Shaft_02988_diam.png", "detail_png/Shaft_02988_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.6 mm and length at least 301.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 228.6 mm (from Z=0.0 to Z=228.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01774", "images": ["images/Shaft_01774.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.4 mm and length at least 153.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.5 mm over length 20.4 mm (from Z=0.0 to Z=124.5).\n9. Finish turn diameter Ø46.1 mm over length 60.7 mm (from Z=0.0 to Z=104.1).\n10. Finish turn diameter Ø30.6 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01406", "images": ["images/Shaft_01406.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 231.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.0 mm (from Z=0.0 to Z=178.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.7 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04419", "images": ["images/Shaft_04419.png", "detail_png/Shaft_04419_length.png", "detail_png/Shaft_04419_diam.png", "detail_png/Shaft_04419_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.1 mm and length at least 119.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.5 mm over length 13.5 mm (from Z=0.0 to Z=63.3).\n9. Finish turn diameter Ø32.5 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04079", "images": ["images/Shaft_04079.png", "detail_png/Shaft_04079_length.png", "detail_png/Shaft_04079_diam.png", "detail_png/Shaft_04079_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.8 mm and length at least 269.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 124.4 mm (from Z=0.0 to Z=235.1).\n10. Finish turn diameter Ø46.1 mm over length 35.4 mm (from Z=0.0 to Z=110.7).\n11. Finish turn diameter Ø42.2 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02890", "images": ["images/Shaft_02890.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.3 mm and length at least 149.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 108.7 mm (from Z=0.0 to Z=108.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00467", "images": ["images/Shaft_00467.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.2 mm and length at least 243.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.5 mm over length 44.9 mm (from Z=0.0 to Z=200.3).\n10. Finish turn diameter Ø54.4 mm over length 35.4 mm (from Z=0.0 to Z=155.4).\n11. Finish turn diameter Ø38.4 mm over length 48.6 mm (from Z=0.0 to Z=120.0).\n12. Finish turn diameter Ø30.0 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00003", "images": ["images/Shaft_00003.png", "detail_png/Shaft_00003_length.png", "detail_png/Shaft_00003_diam.png", "detail_png/Shaft_00003_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.3 mm and length at least 249.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 185.1 mm (from Z=0.0 to Z=185.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03982", "images": ["images/Shaft_03982.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.5 mm and length at least 73.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.6 mm over length 19.1 mm (from Z=0.0 to Z=45.7).\n9. Finish turn diameter Ø30.0 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00825", "images": ["images/Shaft_00825.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.9 mm and length at least 301.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.4 mm over length 74.0 mm (from Z=0.0 to Z=241.0).\n10. Finish turn diameter Ø39.0 mm over length 30.6 mm (from Z=0.0 to Z=167.0).\n11. Finish turn diameter Ø30.0 mm over length 136.4 mm (from Z=0.0 to Z=136.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00338", "images": ["images/Shaft_00338.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.2 mm and length at least 121.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.1 mm over length 15.1 mm (from Z=0.0 to Z=99.6).\n9. Finish turn diameter Ø30.0 mm over length 84.5 mm (from Z=0.0 to Z=84.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01260", "images": ["images/Shaft_01260.png", "detail_png/Shaft_01260_length.png", "detail_png/Shaft_01260_diam.png", "detail_png/Shaft_01260_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.4 mm and length at least 276.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 93.5 mm (from Z=0.0 to Z=186.4).\n10. Finish turn diameter Ø52.3 mm over length 92.9 mm (from Z=0.0 to Z=92.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00058", "images": ["images/Shaft_00058.png", "detail_png/Shaft_00058_length.png", "detail_png/Shaft_00058_diam.png", "detail_png/Shaft_00058_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 116.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.9 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04464", "images": ["images/Shaft_04464.png", "detail_png/Shaft_04464_length.png", "detail_png/Shaft_04464_diam.png", "detail_png/Shaft_04464_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.9 mm and length at least 187.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 112.5 mm (from Z=0.0 to Z=112.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01631", "images": ["images/Shaft_01631.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.3 mm and length at least 107.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 74.2 mm (from Z=0.0 to Z=74.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00408", "images": ["images/Shaft_00408.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 181.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.9 mm over length 29.7 mm (from Z=0.0 to Z=128.1).\n10. Finish turn diameter Ø30.0 mm over length 98.4 mm (from Z=0.0 to Z=98.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04585", "images": ["images/Shaft_04585.png", "detail_png/Shaft_04585_length.png", "detail_png/Shaft_04585_diam.png", "detail_png/Shaft_04585_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.6 mm and length at least 97.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 9.7 mm (from Z=0.0 to Z=67.2).\n9. Finish turn diameter Ø30.0 mm over length 57.5 mm (from Z=0.0 to Z=57.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02699", "images": ["images/Shaft_02699.png", "detail_png/Shaft_02699_length.png", "detail_png/Shaft_02699_diam.png", "detail_png/Shaft_02699_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.1 mm and length at least 189.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 118.6 mm (from Z=0.0 to Z=118.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02346", "images": ["images/Shaft_02346.png", "detail_png/Shaft_02346_length.png", "detail_png/Shaft_02346_diam.png", "detail_png/Shaft_02346_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.9 mm and length at least 128.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.6 mm over length 68.8 mm (from Z=0.0 to Z=107.3).\n9. Finish turn diameter Ø43.6 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00836", "images": ["images/Shaft_00836.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 151.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 92.7 mm (from Z=0.0 to Z=92.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.0 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04410", "images": ["images/Shaft_04410.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.2 mm and length at least 265.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 94.8 mm (from Z=0.0 to Z=94.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.7 mm over length 119.4 mm (from Z=0.0 to Z=165.3).\n10. Finish turn diameter Ø38.8 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01496", "images": ["images/Shaft_01496.png", "detail_png/Shaft_01496_length.png", "detail_png/Shaft_01496_diam.png", "detail_png/Shaft_01496_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.1 mm and length at least 141.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.5 mm over length 15.6 mm (from Z=0.0 to Z=81.5).\n9. Finish turn diameter Ø32.0 mm over length 11.1 mm (from Z=0.0 to Z=65.9).\n10. Finish turn diameter Ø30.0 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00698", "images": ["images/Shaft_00698.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.9 mm and length at least 231.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.6 mm over length 40.1 mm (from Z=0.0 to Z=188.5).\n10. Finish turn diameter Ø40.3 mm over length 24.7 mm (from Z=0.0 to Z=148.4).\n11. Finish turn diameter Ø30.0 mm over length 123.7 mm (from Z=0.0 to Z=123.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02735", "images": ["images/Shaft_02735.png", "detail_png/Shaft_02735_length.png", "detail_png/Shaft_02735_diam.png", "detail_png/Shaft_02735_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.1 mm and length at least 170.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.1 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.4 mm over length 52.0 mm (from Z=0.0 to Z=124.9).\n9. Finish turn diameter Ø47.7 mm over length 51.6 mm (from Z=0.0 to Z=72.9).\n10. Finish turn diameter Ø36.1 mm over length 12.3 mm (from Z=0.0 to Z=21.3).\n11. Finish turn diameter Ø30.0 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01267", "images": ["images/Shaft_01267.png", "detail_png/Shaft_01267_length.png", "detail_png/Shaft_01267_diam.png", "detail_png/Shaft_01267_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.5 mm and length at least 162.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.5 mm over length 37.2 mm (from Z=0.0 to Z=37.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 120.2 mm (from Z=0.0 to Z=120.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03550", "images": ["images/Shaft_03550.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.0 mm and length at least 316.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 81.4 mm (from Z=0.0 to Z=266.6).\n10. Finish turn diameter Ø31.1 mm over length 46.4 mm (from Z=0.0 to Z=185.2).\n11. Finish turn diameter Ø30.0 mm over length 138.8 mm (from Z=0.0 to Z=138.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02396", "images": ["images/Shaft_02396.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.1 mm and length at least 275.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 23.0 mm (from Z=0.0 to Z=222.0).\n10. Finish turn diameter Ø30.0 mm over length 199.0 mm (from Z=0.0 to Z=199.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02372", "images": ["images/Shaft_02372.png", "detail_png/Shaft_02372_length.png", "detail_png/Shaft_02372_diam.png", "detail_png/Shaft_02372_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.4 mm and length at least 210.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 152.4 mm (from Z=0.0 to Z=152.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03576", "images": ["images/Shaft_03576.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 126.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.6 mm (from Z=0.0 to Z=85.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.1 mm over length 35.7 mm (from Z=0.0 to Z=35.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04781", "images": ["images/Shaft_04781.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.1 mm and length at least 137.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.1 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.9 mm over length 45.7 mm (from Z=0.0 to Z=94.7).\n9. Finish turn diameter Ø38.2 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03091", "images": ["images/Shaft_03091.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.0 mm and length at least 276.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.1 mm over length 102.1 mm (from Z=0.0 to Z=164.2).\n10. Finish turn diameter Ø56.9 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03458", "images": ["images/Shaft_03458.png", "detail_png/Shaft_03458_length.png", "detail_png/Shaft_03458_diam.png", "detail_png/Shaft_03458_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.2 mm and length at least 296.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.7 mm over length 80.6 mm (from Z=0.0 to Z=282.5).\n10. Finish turn diameter Ø62.9 mm over length 47.4 mm (from Z=0.0 to Z=201.9).\n11. Finish turn diameter Ø57.2 mm over length 72.4 mm (from Z=0.0 to Z=154.5).\n12. Finish turn diameter Ø43.9 mm over length 82.1 mm (from Z=0.0 to Z=82.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03806", "images": ["images/Shaft_03806.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.1 mm and length at least 298.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 275.9 mm (from Z=0.0 to Z=275.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02308", "images": ["images/Shaft_02308.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.8 mm and length at least 216.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.9 mm over length 12.9 mm (from Z=0.0 to Z=147.5).\n10. Finish turn diameter Ø41.8 mm over length 56.1 mm (from Z=0.0 to Z=134.6).\n11. Finish turn diameter Ø36.6 mm over length 39.7 mm (from Z=0.0 to Z=78.5).\n12. Finish turn diameter Ø30.0 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01192", "images": ["images/Shaft_01192.png", "detail_png/Shaft_01192_length.png", "detail_png/Shaft_01192_diam.png", "detail_png/Shaft_01192_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.7 mm and length at least 181.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.7 mm over length 45.4 mm (from Z=0.0 to Z=135.9).\n9. Finish turn diameter Ø43.1 mm over length 23.6 mm (from Z=0.0 to Z=90.5).\n10. Finish turn diameter Ø30.0 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04305", "images": ["images/Shaft_04305.png", "detail_png/Shaft_04305_length.png", "detail_png/Shaft_04305_diam.png", "detail_png/Shaft_04305_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 308.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 303.8 mm (from Z=0.0 to Z=303.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Break all edges (e.g., 2×45° where applicable).\n9. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00977", "images": ["images/Shaft_00977.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.9 mm and length at least 277.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 87.2 mm (from Z=0.0 to Z=87.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 94.1 mm (from Z=0.0 to Z=185.5).\n10. Finish turn diameter Ø36.8 mm over length 91.4 mm (from Z=0.0 to Z=91.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03520", "images": ["images/Shaft_03520.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 232.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 160.1 mm (from Z=0.0 to Z=160.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 67.0 mm (from Z=0.0 to Z=67.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01503", "images": ["images/Shaft_01503.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.5 mm and length at least 270.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.6 mm over length 61.1 mm (from Z=0.0 to Z=245.7).\n10. Finish turn diameter Ø59.4 mm over length 82.7 mm (from Z=0.0 to Z=184.6).\n11. Finish turn diameter Ø42.4 mm over length 101.9 mm (from Z=0.0 to Z=101.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02392", "images": ["images/Shaft_02392.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.4 mm and length at least 260.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.1 mm over length 64.5 mm (from Z=0.0 to Z=186.9).\n10. Finish turn diameter Ø31.9 mm over length 37.8 mm (from Z=0.0 to Z=122.4).\n11. Finish turn diameter Ø30.0 mm over length 84.6 mm (from Z=0.0 to Z=84.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00954", "images": ["images/Shaft_00954.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 202.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 156.5 mm (from Z=0.0 to Z=156.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.8 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02274", "images": ["images/Shaft_02274.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.5 mm and length at least 153.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.2 mm over length 50.6 mm (from Z=0.0 to Z=133.3).\n9. Finish turn diameter Ø40.8 mm over length 46.6 mm (from Z=0.0 to Z=82.7).\n10. Finish turn diameter Ø31.7 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01054", "images": ["images/Shaft_01054.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.8 mm and length at least 210.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 61.8 mm (from Z=0.0 to Z=61.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.3 mm over length 79.0 mm (from Z=0.0 to Z=143.5).\n10. Finish turn diameter Ø31.7 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03655", "images": ["images/Shaft_03655.png", "detail_png/Shaft_03655_length.png", "detail_png/Shaft_03655_diam.png", "detail_png/Shaft_03655_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.4 mm and length at least 236.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 24.0 mm (from Z=0.0 to Z=184.5).\n10. Finish turn diameter Ø30.0 mm over length 160.5 mm (from Z=0.0 to Z=160.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04026", "images": ["images/Shaft_04026.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.5 mm and length at least 93.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.8 mm over length 30.5 mm (from Z=0.0 to Z=71.7).\n9. Finish turn diameter Ø42.1 mm over length 33.3 mm (from Z=0.0 to Z=41.2).\n10. Finish turn diameter Ø30.0 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01962", "images": ["images/Shaft_01962.png", "detail_png/Shaft_01962_length.png", "detail_png/Shaft_01962_diam.png", "detail_png/Shaft_01962_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.2 mm and length at least 252.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 225.6 mm (from Z=0.0 to Z=225.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01153", "images": ["images/Shaft_01153.png", "detail_png/Shaft_01153_length.png", "detail_png/Shaft_01153_diam.png", "detail_png/Shaft_01153_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.3 mm and length at least 153.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 85.2 mm (from Z=0.0 to Z=85.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.2 mm over length 52.9 mm (from Z=0.0 to Z=62.8).\n9. Finish turn diameter Ø30.0 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04164", "images": ["images/Shaft_04164.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.6 mm and length at least 232.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 37.6 mm (from Z=0.0 to Z=156.8).\n10. Finish turn diameter Ø48.0 mm over length 33.6 mm (from Z=0.0 to Z=119.2).\n11. Finish turn diameter Ø36.3 mm over length 60.5 mm (from Z=0.0 to Z=85.6).\n12. Finish turn diameter Ø30.0 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00062", "images": ["images/Shaft_00062.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.0 mm and length at least 301.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 43.5 mm (from Z=0.0 to Z=43.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.4 mm over length 35.1 mm (from Z=0.0 to Z=253.1).\n10. Finish turn diameter Ø51.4 mm over length 52.8 mm (from Z=0.0 to Z=218.0).\n11. Finish turn diameter Ø33.1 mm over length 39.0 mm (from Z=0.0 to Z=165.2).\n12. Finish turn diameter Ø30.0 mm over length 126.2 mm (from Z=0.0 to Z=126.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02388", "images": ["images/Shaft_02388.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.3 mm and length at least 265.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 126.9 mm (from Z=0.0 to Z=126.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 99.0 mm (from Z=0.0 to Z=133.9).\n10. Finish turn diameter Ø44.7 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00103", "images": ["images/Shaft_00103.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.8 mm and length at least 129.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.8 mm over length 32.5 mm (from Z=0.0 to Z=119.5).\n9. Finish turn diameter Ø31.5 mm over length 36.5 mm (from Z=0.0 to Z=87.0).\n10. Finish turn diameter Ø30.0 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00778", "images": ["images/Shaft_00778.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.0 mm and length at least 199.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.5 mm over length 33.1 mm (from Z=0.0 to Z=118.0).\n10. Finish turn diameter Ø37.4 mm over length 29.2 mm (from Z=0.0 to Z=84.9).\n11. Finish turn diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04400", "images": ["images/Shaft_04400.png", "detail_png/Shaft_04400_length.png", "detail_png/Shaft_04400_diam.png", "detail_png/Shaft_04400_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.6 mm and length at least 317.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.6 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 234.0 mm (from Z=0.0 to Z=234.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01971", "images": ["images/Shaft_01971.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 274.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 197.8 mm (from Z=0.0 to Z=197.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.0 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04838", "images": ["images/Shaft_04838.png", "detail_png/Shaft_04838_length.png", "detail_png/Shaft_04838_diam.png", "detail_png/Shaft_04838_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.6 mm and length at least 140.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 23.2 mm (from Z=0.0 to Z=108.2).\n9. Finish turn diameter Ø46.9 mm over length 45.5 mm (from Z=0.0 to Z=85.0).\n10. Finish turn diameter Ø35.4 mm over length 21.3 mm (from Z=0.0 to Z=39.5).\n11. Finish turn diameter Ø30.0 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02881", "images": ["images/Shaft_02881.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.2 mm and length at least 264.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 91.2 mm (from Z=0.0 to Z=91.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.5 mm (from Z=0.0 to Z=168.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00599", "images": ["images/Shaft_00599.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.7 mm and length at least 298.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.7 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.5 mm over length 70.7 mm (from Z=0.0 to Z=259.7).\n10. Finish turn diameter Ø61.2 mm over length 114.0 mm (from Z=0.0 to Z=189.0).\n11. Finish turn diameter Ø47.3 mm over length 75.0 mm (from Z=0.0 to Z=75.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04720", "images": ["images/Shaft_04720.png", "detail_png/Shaft_04720_length.png", "detail_png/Shaft_04720_diam.png", "detail_png/Shaft_04720_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 312.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 250.0 mm (from Z=0.0 to Z=250.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.5 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04534", "images": ["images/Shaft_04534.png", "detail_png/Shaft_04534_length.png", "detail_png/Shaft_04534_diam.png", "detail_png/Shaft_04534_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.5 mm and length at least 121.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.1 mm over length 31.6 mm (from Z=0.0 to Z=93.2).\n9. Finish turn diameter Ø60.7 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04381", "images": ["images/Shaft_04381.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.2 mm and length at least 274.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 167.9 mm (from Z=0.0 to Z=167.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.0 mm over length 56.6 mm (from Z=0.0 to Z=101.2).\n10. Finish turn diameter Ø30.0 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00283", "images": ["images/Shaft_00283.png", "detail_png/Shaft_00283_length.png", "detail_png/Shaft_00283_diam.png", "detail_png/Shaft_00283_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.9 mm and length at least 77.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 12.6 mm (from Z=0.0 to Z=34.2).\n9. Finish turn diameter Ø55.7 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00127", "images": ["images/Shaft_00127.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.0 mm and length at least 241.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.0 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 209.4 mm (from Z=0.0 to Z=209.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02775", "images": ["images/Shaft_02775.png", "detail_png/Shaft_02775_length.png", "detail_png/Shaft_02775_diam.png", "detail_png/Shaft_02775_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.6 mm and length at least 222.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 25.3 mm (from Z=0.0 to Z=25.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.1 mm over length 59.1 mm (from Z=0.0 to Z=192.0).\n10. Finish turn diameter Ø47.3 mm over length 78.6 mm (from Z=0.0 to Z=132.9).\n11. Finish turn diameter Ø30.0 mm over length 54.3 mm (from Z=0.0 to Z=54.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04447", "images": ["images/Shaft_04447.png", "detail_png/Shaft_04447_length.png", "detail_png/Shaft_04447_diam.png", "detail_png/Shaft_04447_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.9 mm and length at least 203.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 12.3 mm (from Z=0.0 to Z=152.3).\n10. Finish turn diameter Ø30.0 mm over length 140.0 mm (from Z=0.0 to Z=140.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00300", "images": ["images/Shaft_00300.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.6 mm and length at least 101.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03513", "images": ["images/Shaft_03513.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.6 mm and length at least 81.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.6 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.7 mm over length 16.0 mm (from Z=0.0 to Z=52.6).\n9. Finish turn diameter Ø41.7 mm over length 9.7 mm (from Z=0.0 to Z=36.6).\n10. Finish turn diameter Ø37.0 mm over length 8.3 mm (from Z=0.0 to Z=26.9).\n11. Finish turn diameter Ø30.0 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02804", "images": ["images/Shaft_02804.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.8 mm and length at least 149.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 38.9 mm (from Z=0.0 to Z=38.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 34.3 mm (from Z=0.0 to Z=106.0).\n9. Finish turn diameter Ø41.4 mm over length 16.4 mm (from Z=0.0 to Z=71.7).\n10. Finish turn diameter Ø30.0 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01020", "images": ["images/Shaft_01020.png", "detail_png/Shaft_01020_length.png", "detail_png/Shaft_01020_diam.png", "detail_png/Shaft_01020_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.8 mm and length at least 236.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.8 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.9 mm over length 40.1 mm (from Z=0.0 to Z=171.3).\n10. Finish turn diameter Ø35.7 mm over length 78.0 mm (from Z=0.0 to Z=131.2).\n11. Finish turn diameter Ø30.0 mm over length 53.2 mm (from Z=0.0 to Z=53.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00889", "images": ["images/Shaft_00889.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.0 mm and length at least 203.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 46.1 mm (from Z=0.0 to Z=46.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 152.1 mm (from Z=0.0 to Z=152.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03109", "images": ["images/Shaft_03109.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.1 mm and length at least 309.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.8 mm over length 14.5 mm (from Z=0.0 to Z=266.0).\n10. Finish turn diameter Ø36.7 mm over length 82.3 mm (from Z=0.0 to Z=251.5).\n11. Finish turn diameter Ø30.0 mm over length 169.2 mm (from Z=0.0 to Z=169.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04577", "images": ["images/Shaft_04577.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.8 mm and length at least 283.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 144.2 mm (from Z=0.0 to Z=144.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.4 mm over length 14.5 mm (from Z=0.0 to Z=134.2).\n10. Finish turn diameter Ø31.6 mm over length 119.7 mm (from Z=0.0 to Z=119.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02834", "images": ["images/Shaft_02834.png", "detail_png/Shaft_02834_length.png", "detail_png/Shaft_02834_diam.png", "detail_png/Shaft_02834_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.5 mm and length at least 204.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 69.2 mm (from Z=0.0 to Z=146.2).\n10. Finish turn diameter Ø35.3 mm over length 77.0 mm (from Z=0.0 to Z=77.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04771", "images": ["images/Shaft_04771.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.0 mm and length at least 286.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 67.7 mm (from Z=0.0 to Z=67.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.2 mm over length 50.5 mm (from Z=0.0 to Z=213.3).\n10. Finish turn diameter Ø30.0 mm over length 162.8 mm (from Z=0.0 to Z=162.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01114", "images": ["images/Shaft_01114.png", "detail_png/Shaft_01114_length.png", "detail_png/Shaft_01114_diam.png", "detail_png/Shaft_01114_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.6 mm and length at least 122.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.6 mm over length 36.5 mm (from Z=0.0 to Z=108.4).\n9. Finish turn diameter Ø40.3 mm over length 9.4 mm (from Z=0.0 to Z=71.9).\n10. Finish turn diameter Ø35.3 mm over length 30.8 mm (from Z=0.0 to Z=62.5).\n11. Finish turn diameter Ø31.3 mm over length 22.6 mm (from Z=0.0 to Z=31.7).\n12. Finish turn diameter Ø30.0 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01792", "images": ["images/Shaft_01792.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.5 mm and length at least 197.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.2 mm over length 43.3 mm (from Z=0.0 to Z=157.4).\n10. Finish turn diameter Ø30.6 mm over length 35.1 mm (from Z=0.0 to Z=114.1).\n11. Finish turn diameter Ø30.0 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03477", "images": ["images/Shaft_03477.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 169.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.5 mm over length 16.6 mm (from Z=0.0 to Z=112.9).\n9. Finish turn diameter Ø35.2 mm over length 41.5 mm (from Z=0.0 to Z=96.3).\n10. Finish turn diameter Ø30.0 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02031", "images": ["images/Shaft_02031.png", "detail_png/Shaft_02031_length.png", "detail_png/Shaft_02031_diam.png", "detail_png/Shaft_02031_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.6 mm and length at least 132.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.6 mm over length 13.8 mm (from Z=0.0 to Z=70.6).\n9. Finish turn diameter Ø30.0 mm over length 56.8 mm (from Z=0.0 to Z=56.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00777", "images": ["images/Shaft_00777.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.7 mm and length at least 135.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.7 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.4 mm over length 10.0 mm (from Z=0.0 to Z=99.0).\n9. Finish turn diameter Ø40.3 mm over length 37.4 mm (from Z=0.0 to Z=89.0).\n10. Finish turn diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01482", "images": ["images/Shaft_01482.png", "detail_png/Shaft_01482_length.png", "detail_png/Shaft_01482_diam.png", "detail_png/Shaft_01482_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.1 mm and length at least 193.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.1 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.0 mm over length 45.7 mm (from Z=0.0 to Z=154.1).\n9. Finish turn diameter Ø38.9 mm over length 27.6 mm (from Z=0.0 to Z=108.4).\n10. Finish turn diameter Ø30.0 mm over length 80.8 mm (from Z=0.0 to Z=80.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03748", "images": ["images/Shaft_03748.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.5 mm and length at least 161.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 115.0 mm (from Z=0.0 to Z=115.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03361", "images": ["images/Shaft_03361.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.0 mm and length at least 273.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.1 mm over length 70.7 mm (from Z=0.0 to Z=241.8).\n10. Finish turn diameter Ø36.9 mm over length 90.9 mm (from Z=0.0 to Z=171.1).\n11. Finish turn diameter Ø30.0 mm over length 80.2 mm (from Z=0.0 to Z=80.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03688", "images": ["images/Shaft_03688.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.7 mm and length at least 213.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 85.6 mm (from Z=0.0 to Z=85.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.9 mm over length 23.2 mm (from Z=0.0 to Z=123.1).\n10. Finish turn diameter Ø60.1 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01273", "images": ["images/Shaft_01273.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.1 mm and length at least 175.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 8.8 mm (from Z=0.0 to Z=8.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 52.2 mm (from Z=0.0 to Z=161.5).\n9. Finish turn diameter Ø37.5 mm over length 26.6 mm (from Z=0.0 to Z=109.3).\n10. Finish turn diameter Ø30.0 mm over length 82.7 mm (from Z=0.0 to Z=82.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00940", "images": ["images/Shaft_00940.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 128.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.2 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02821", "images": ["images/Shaft_02821.png", "detail_png/Shaft_02821_length.png", "detail_png/Shaft_02821_diam.png", "detail_png/Shaft_02821_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.0 mm and length at least 241.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.5 mm over length 40.3 mm (from Z=0.0 to Z=189.5).\n10. Finish turn diameter Ø46.3 mm over length 18.8 mm (from Z=0.0 to Z=149.2).\n11. Finish turn diameter Ø31.9 mm over length 43.1 mm (from Z=0.0 to Z=130.4).\n12. Finish turn diameter Ø30.0 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03239", "images": ["images/Shaft_03239.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.2 mm and length at least 102.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 36.8 mm (from Z=0.0 to Z=36.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.4 mm over length 21.9 mm (from Z=0.0 to Z=60.8).\n9. Finish turn diameter Ø37.9 mm over length 17.7 mm (from Z=0.0 to Z=38.9).\n10. Finish turn diameter Ø30.0 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04831", "images": ["images/Shaft_04831.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.7 mm and length at least 275.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 114.0 mm (from Z=0.0 to Z=114.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.6 mm over length 43.8 mm (from Z=0.0 to Z=156.6).\n10. Finish turn diameter Ø50.5 mm over length 54.3 mm (from Z=0.0 to Z=112.8).\n11. Finish turn diameter Ø45.1 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04052", "images": ["images/Shaft_04052.png", "detail_png/Shaft_04052_length.png", "detail_png/Shaft_04052_diam.png", "detail_png/Shaft_04052_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.3 mm and length at least 288.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.4 mm over length 43.5 mm (from Z=0.0 to Z=250.0).\n10. Finish turn diameter Ø30.0 mm over length 206.5 mm (from Z=0.0 to Z=206.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04467", "images": ["images/Shaft_04467.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.1 mm and length at least 146.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.3 mm over length 24.3 mm (from Z=0.0 to Z=124.0).\n9. Finish turn diameter Ø35.3 mm over length 34.4 mm (from Z=0.0 to Z=99.7).\n10. Finish turn diameter Ø30.0 mm over length 65.3 mm (from Z=0.0 to Z=65.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02130", "images": ["images/Shaft_02130.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.2 mm and length at least 185.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.4 mm over length 61.1 mm (from Z=0.0 to Z=172.9).\n10. Finish turn diameter Ø30.0 mm over length 111.8 mm (from Z=0.0 to Z=111.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03105", "images": ["images/Shaft_03105.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.9 mm and length at least 177.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.0 mm over length 66.5 mm (from Z=0.0 to Z=111.8).\n9. Finish turn diameter Ø30.0 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03342", "images": ["images/Shaft_03342.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.1 mm and length at least 236.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.0 mm over length 66.1 mm (from Z=0.0 to Z=209.9).\n10. Finish turn diameter Ø47.6 mm over length 76.3 mm (from Z=0.0 to Z=143.8).\n11. Finish turn diameter Ø43.8 mm over length 12.7 mm (from Z=0.0 to Z=67.5).\n12. Finish turn diameter Ø30.1 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00202", "images": ["images/Shaft_00202.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.2 mm and length at least 126.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 24.5 mm (from Z=0.0 to Z=79.8).\n9. Finish turn diameter Ø33.5 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02107", "images": ["images/Shaft_02107.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.2 mm and length at least 185.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 42.3 mm (from Z=0.0 to Z=162.5).\n10. Finish turn diameter Ø30.0 mm over length 120.2 mm (from Z=0.0 to Z=120.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01559", "images": ["images/Shaft_01559.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 199.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 135.5 mm (from Z=0.0 to Z=135.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01726", "images": ["images/Shaft_01726.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.7 mm and length at least 236.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.7 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.4 mm over length 118.9 mm (from Z=0.0 to Z=185.6).\n10. Finish turn diameter Ø30.0 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03077", "images": ["images/Shaft_03077.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.0 mm and length at least 126.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.1 mm over length 20.6 mm (from Z=0.0 to Z=111.3).\n9. Finish turn diameter Ø42.6 mm over length 28.0 mm (from Z=0.0 to Z=90.7).\n10. Finish turn diameter Ø30.0 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02842", "images": ["images/Shaft_02842.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.6 mm and length at least 188.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 38.6 mm (from Z=0.0 to Z=161.0).\n9. Finish turn diameter Ø36.7 mm over length 38.1 mm (from Z=0.0 to Z=122.4).\n10. Finish turn diameter Ø30.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03624", "images": ["images/Shaft_03624.png", "detail_png/Shaft_03624_length.png", "detail_png/Shaft_03624_diam.png", "detail_png/Shaft_03624_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 199.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 159.1 mm (from Z=0.0 to Z=159.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.6 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03622", "images": ["images/Shaft_03622.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.2 mm and length at least 149.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.6 mm over length 18.6 mm (from Z=0.0 to Z=132.8).\n9. Finish turn diameter Ø49.2 mm over length 51.6 mm (from Z=0.0 to Z=114.2).\n10. Finish turn diameter Ø30.0 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02816", "images": ["images/Shaft_02816.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.2 mm and length at least 202.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 65.9 mm (from Z=0.0 to Z=187.0).\n10. Finish turn diameter Ø42.6 mm over length 9.6 mm (from Z=0.0 to Z=121.1).\n11. Finish turn diameter Ø33.8 mm over length 48.4 mm (from Z=0.0 to Z=111.5).\n12. Finish turn diameter Ø30.0 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02475", "images": ["images/Shaft_02475.png", "detail_png/Shaft_02475_length.png", "detail_png/Shaft_02475_diam.png", "detail_png/Shaft_02475_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.7 mm and length at least 239.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 161.3 mm (from Z=0.0 to Z=161.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03869", "images": ["images/Shaft_03869.png", "detail_png/Shaft_03869_length.png", "detail_png/Shaft_03869_diam.png", "detail_png/Shaft_03869_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.4 mm and length at least 224.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 93.7 mm (from Z=0.0 to Z=93.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 67.1 mm (from Z=0.0 to Z=125.7).\n10. Finish turn diameter Ø47.4 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03271", "images": ["images/Shaft_03271.png", "detail_png/Shaft_03271_length.png", "detail_png/Shaft_03271_diam.png", "detail_png/Shaft_03271_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.3 mm and length at least 150.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 48.9 mm (from Z=0.0 to Z=48.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.0 mm over length 38.0 mm (from Z=0.0 to Z=96.3).\n9. Finish turn diameter Ø50.4 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02696", "images": ["images/Shaft_02696.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.9 mm and length at least 162.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 115.4 mm (from Z=0.0 to Z=115.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00427", "images": ["images/Shaft_00427.png", "detail_png/Shaft_00427_length.png", "detail_png/Shaft_00427_diam.png", "detail_png/Shaft_00427_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.4 mm and length at least 125.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01620", "images": ["images/Shaft_01620.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.0 mm and length at least 196.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.3 mm over length 45.5 mm (from Z=0.0 to Z=153.9).\n10. Finish turn diameter Ø52.1 mm over length 46.1 mm (from Z=0.0 to Z=108.4).\n11. Finish turn diameter Ø34.6 mm over length 34.2 mm (from Z=0.0 to Z=62.3).\n12. Finish turn diameter Ø30.0 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00792", "images": ["images/Shaft_00792.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.9 mm and length at least 212.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.8 mm over length 55.0 mm (from Z=0.0 to Z=189.3).\n10. Finish turn diameter Ø30.0 mm over length 134.3 mm (from Z=0.0 to Z=134.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03668", "images": ["images/Shaft_03668.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.6 mm and length at least 74.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.8 mm over length 22.0 mm (from Z=0.0 to Z=55.0).\n9. Finish turn diameter Ø36.5 mm over length 10.3 mm (from Z=0.0 to Z=33.0).\n10. Finish turn diameter Ø30.0 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04048", "images": ["images/Shaft_04048.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 231.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 201.5 mm (from Z=0.0 to Z=201.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.1 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04726", "images": ["images/Shaft_04726.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.3 mm and length at least 175.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.3 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.3 mm over length 42.4 mm (from Z=0.0 to Z=110.0).\n9. Finish turn diameter Ø30.5 mm over length 13.3 mm (from Z=0.0 to Z=67.6).\n10. Finish turn diameter Ø30.0 mm over length 54.3 mm (from Z=0.0 to Z=54.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03867", "images": ["images/Shaft_03867.png", "detail_png/Shaft_03867_length.png", "detail_png/Shaft_03867_diam.png", "detail_png/Shaft_03867_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.9 mm and length at least 196.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.3 mm (from Z=0.0 to Z=126.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00835", "images": ["images/Shaft_00835.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.9 mm and length at least 310.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.9 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.1 mm over length 76.1 mm (from Z=0.0 to Z=231.5).\n10. Finish turn diameter Ø34.9 mm over length 85.2 mm (from Z=0.0 to Z=155.4).\n11. Finish turn diameter Ø30.0 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03826", "images": ["images/Shaft_03826.png", "detail_png/Shaft_03826_length.png", "detail_png/Shaft_03826_diam.png", "detail_png/Shaft_03826_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.8 mm and length at least 283.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 145.0 mm (from Z=0.0 to Z=145.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.5 mm over length 32.0 mm (from Z=0.0 to Z=133.0).\n10. Finish turn diameter Ø30.0 mm over length 101.0 mm (from Z=0.0 to Z=101.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04700", "images": ["images/Shaft_04700.png", "detail_png/Shaft_04700_length.png", "detail_png/Shaft_04700_diam.png", "detail_png/Shaft_04700_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.2 mm and length at least 307.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 93.6 mm (from Z=0.0 to Z=93.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 92.3 mm (from Z=0.0 to Z=208.5).\n10. Finish turn diameter Ø53.7 mm over length 74.3 mm (from Z=0.0 to Z=116.2).\n11. Finish turn diameter Ø41.5 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04366", "images": ["images/Shaft_04366.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.9 mm and length at least 264.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.8 mm over length 36.8 mm (from Z=0.0 to Z=228.5).\n10. Finish turn diameter Ø30.0 mm over length 191.7 mm (from Z=0.0 to Z=191.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02484", "images": ["images/Shaft_02484.png", "detail_png/Shaft_02484_length.png", "detail_png/Shaft_02484_diam.png", "detail_png/Shaft_02484_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.6 mm and length at least 79.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.3 mm over length 12.4 mm (from Z=0.0 to Z=69.8).\n9. Finish turn diameter Ø30.5 mm over length 16.0 mm (from Z=0.0 to Z=57.4).\n10. Finish turn diameter Ø30.0 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02366", "images": ["images/Shaft_02366.png", "detail_png/Shaft_02366_length.png", "detail_png/Shaft_02366_diam.png", "detail_png/Shaft_02366_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.9 mm and length at least 254.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 83.0 mm (from Z=0.0 to Z=83.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.9 mm over length 38.0 mm (from Z=0.0 to Z=166.6).\n10. Finish turn diameter Ø38.6 mm over length 68.9 mm (from Z=0.0 to Z=128.6).\n11. Finish turn diameter Ø30.0 mm over length 59.7 mm (from Z=0.0 to Z=59.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01493", "images": ["images/Shaft_01493.png", "detail_png/Shaft_01493_length.png", "detail_png/Shaft_01493_diam.png", "detail_png/Shaft_01493_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.0 mm and length at least 213.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.9 mm over length 98.9 mm (from Z=0.0 to Z=146.3).\n10. Finish turn diameter Ø30.0 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01555", "images": ["images/Shaft_01555.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.7 mm and length at least 193.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 160.0 mm (from Z=0.0 to Z=160.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03267", "images": ["images/Shaft_03267.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.5 mm and length at least 135.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03146", "images": ["images/Shaft_03146.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.4 mm and length at least 288.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.1 mm over length 67.0 mm (from Z=0.0 to Z=231.8).\n10. Finish turn diameter Ø43.5 mm over length 30.2 mm (from Z=0.0 to Z=164.8).\n11. Finish turn diameter Ø30.0 mm over length 134.6 mm (from Z=0.0 to Z=134.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01565", "images": ["images/Shaft_01565.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.0 mm and length at least 80.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.0 mm over length 22.4 mm (from Z=0.0 to Z=63.8).\n9. Finish turn diameter Ø32.3 mm over length 14.2 mm (from Z=0.0 to Z=41.4).\n10. Finish turn diameter Ø30.0 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04807", "images": ["images/Shaft_04807.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.1 mm and length at least 89.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.1 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.7 mm over length 33.3 mm (from Z=0.0 to Z=51.5).\n9. Finish turn diameter Ø30.0 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03945", "images": ["images/Shaft_03945.png", "detail_png/Shaft_03945_length.png", "detail_png/Shaft_03945_diam.png", "detail_png/Shaft_03945_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.5 mm and length at least 234.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.9 mm over length 85.9 mm (from Z=0.0 to Z=190.4).\n10. Finish turn diameter Ø53.2 mm over length 49.8 mm (from Z=0.0 to Z=104.5).\n11. Finish turn diameter Ø43.5 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02585", "images": ["images/Shaft_02585.png", "detail_png/Shaft_02585_length.png", "detail_png/Shaft_02585_diam.png", "detail_png/Shaft_02585_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.5 mm and length at least 113.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 98.6 mm (from Z=0.0 to Z=98.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03829", "images": ["images/Shaft_03829.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.1 mm and length at least 248.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 75.4 mm (from Z=0.0 to Z=226.0).\n10. Finish turn diameter Ø30.0 mm over length 150.6 mm (from Z=0.0 to Z=150.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01183", "images": ["images/Shaft_01183.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.0 mm and length at least 192.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.9 mm over length 59.5 mm (from Z=0.0 to Z=158.6).\n10. Finish turn diameter Ø30.0 mm over length 99.1 mm (from Z=0.0 to Z=99.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00586", "images": ["images/Shaft_00586.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 230.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.1 mm (from Z=0.0 to Z=178.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.1 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01400", "images": ["images/Shaft_01400.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.4 mm and length at least 210.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 42.2 mm (from Z=0.0 to Z=42.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.9 mm over length 56.1 mm (from Z=0.0 to Z=163.1).\n10. Finish turn diameter Ø30.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03389", "images": ["images/Shaft_03389.png", "detail_png/Shaft_03389_length.png", "detail_png/Shaft_03389_diam.png", "detail_png/Shaft_03389_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 275.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.1 mm (from Z=0.0 to Z=136.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 133.9 mm (from Z=0.0 to Z=133.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01304", "images": ["images/Shaft_01304.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.1 mm and length at least 197.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.4 mm over length 18.8 mm (from Z=0.0 to Z=163.8).\n10. Finish turn diameter Ø54.8 mm over length 69.2 mm (from Z=0.0 to Z=145.0).\n11. Finish turn diameter Ø35.1 mm over length 12.7 mm (from Z=0.0 to Z=75.8).\n12. Finish turn diameter Ø30.0 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04734", "images": ["images/Shaft_04734.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.0 mm and length at least 125.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.0 mm over length 35.6 mm (from Z=0.0 to Z=35.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.5 mm (from Z=0.0 to Z=84.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03124", "images": ["images/Shaft_03124.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.6 mm and length at least 107.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 17.1 mm (from Z=0.0 to Z=86.1).\n9. Finish turn diameter Ø37.7 mm over length 38.0 mm (from Z=0.0 to Z=69.0).\n10. Finish turn diameter Ø31.4 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03736", "images": ["images/Shaft_03736.png", "detail_png/Shaft_03736_length.png", "detail_png/Shaft_03736_diam.png", "detail_png/Shaft_03736_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.1 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.5 mm over length 20.0 mm (from Z=0.0 to Z=85.2).\n9. Finish turn diameter Ø30.0 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00999", "images": ["images/Shaft_00999.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.1 mm and length at least 177.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 32.5 mm (from Z=0.0 to Z=155.7).\n9. Finish turn diameter Ø35.5 mm over length 45.8 mm (from Z=0.0 to Z=123.2).\n10. Finish turn diameter Ø30.0 mm over length 77.4 mm (from Z=0.0 to Z=77.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02595", "images": ["images/Shaft_02595.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 241.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 217.5 mm (from Z=0.0 to Z=217.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.4 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03815", "images": ["images/Shaft_03815.png", "detail_png/Shaft_03815_length.png", "detail_png/Shaft_03815_diam.png", "detail_png/Shaft_03815_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.0 mm and length at least 224.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 88.6 mm (from Z=0.0 to Z=88.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 52.7 mm (from Z=0.0 to Z=130.4).\n10. Finish turn diameter Ø53.5 mm over length 32.3 mm (from Z=0.0 to Z=77.7).\n11. Finish turn diameter Ø43.0 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00751", "images": ["images/Shaft_00751.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 195.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 179.7 mm (from Z=0.0 to Z=179.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00315", "images": ["images/Shaft_00315.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.6 mm and length at least 275.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 231.6 mm (from Z=0.0 to Z=231.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01057", "images": ["images/Shaft_01057.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.4 mm and length at least 175.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 130.6 mm (from Z=0.0 to Z=130.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00391", "images": ["images/Shaft_00391.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 242.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 144.4 mm (from Z=0.0 to Z=144.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.9 mm over length 92.8 mm (from Z=0.0 to Z=92.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04450", "images": ["images/Shaft_04450.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.9 mm and length at least 72.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.2 mm over length 17.1 mm (from Z=0.0 to Z=52.5).\n9. Finish turn diameter Ø59.2 mm over length 13.1 mm (from Z=0.0 to Z=35.4).\n10. Finish turn diameter Ø54.8 mm over length 7.9 mm (from Z=0.0 to Z=22.3).\n11. Finish turn diameter Ø50.6 mm over length 9.0 mm (from Z=0.0 to Z=14.4).\n12. Finish turn diameter Ø33.6 mm over length 5.4 mm (from Z=0.0 to Z=5.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02902", "images": ["images/Shaft_02902.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.3 mm and length at least 112.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.5 mm over length 14.0 mm (from Z=0.0 to Z=97.3).\n9. Finish turn diameter Ø47.9 mm over length 19.3 mm (from Z=0.0 to Z=83.3).\n10. Finish turn diameter Ø31.6 mm over length 20.4 mm (from Z=0.0 to Z=64.0).\n11. Finish turn diameter Ø30.0 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02894", "images": ["images/Shaft_02894.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.2 mm and length at least 103.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.9 mm over length 36.4 mm (from Z=0.0 to Z=62.2).\n9. Finish turn diameter Ø39.2 mm over length 9.1 mm (from Z=0.0 to Z=25.8).\n10. Finish turn diameter Ø35.8 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02590", "images": ["images/Shaft_02590.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.4 mm and length at least 76.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.7 mm over length 10.8 mm (from Z=0.0 to Z=57.6).\n9. Finish turn diameter Ø30.0 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03227", "images": ["images/Shaft_03227.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.4 mm and length at least 197.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 133.7 mm (from Z=0.0 to Z=133.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04842", "images": ["images/Shaft_04842.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 73.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.0 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04845", "images": ["images/Shaft_04845.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.3 mm and length at least 262.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 201.7 mm (from Z=0.0 to Z=201.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01621", "images": ["images/Shaft_01621.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.0 mm and length at least 260.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.0 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 197.5 mm (from Z=0.0 to Z=197.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04098", "images": ["images/Shaft_04098.png", "detail_png/Shaft_04098_length.png", "detail_png/Shaft_04098_diam.png", "detail_png/Shaft_04098_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.5 mm and length at least 282.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.5 mm over length 97.2 mm (from Z=0.0 to Z=97.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 180.6 mm (from Z=0.0 to Z=180.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04203", "images": ["images/Shaft_04203.png", "detail_png/Shaft_04203_length.png", "detail_png/Shaft_04203_diam.png", "detail_png/Shaft_04203_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.8 mm and length at least 97.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.4 mm over length 8.6 mm (from Z=0.0 to Z=64.0).\n9. Finish turn diameter Ø43.7 mm over length 28.4 mm (from Z=0.0 to Z=55.4).\n10. Finish turn diameter Ø34.2 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02901", "images": ["images/Shaft_02901.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 184.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.9 mm over length 84.7 mm (from Z=0.0 to Z=84.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02944", "images": ["images/Shaft_02944.png", "detail_png/Shaft_02944_length.png", "detail_png/Shaft_02944_diam.png", "detail_png/Shaft_02944_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.4 mm and length at least 253.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 87.2 mm (from Z=0.0 to Z=87.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.1 mm over length 33.7 mm (from Z=0.0 to Z=161.2).\n10. Finish turn diameter Ø40.3 mm over length 127.5 mm (from Z=0.0 to Z=127.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00897", "images": ["images/Shaft_00897.png", "detail_png/Shaft_00897_length.png", "detail_png/Shaft_00897_diam.png", "detail_png/Shaft_00897_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.1 mm and length at least 207.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 155.0 mm (from Z=0.0 to Z=155.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04032", "images": ["images/Shaft_04032.png", "detail_png/Shaft_04032_length.png", "detail_png/Shaft_04032_diam.png", "detail_png/Shaft_04032_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 310.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 226.5 mm (from Z=0.0 to Z=226.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.4 mm over length 79.4 mm (from Z=0.0 to Z=79.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02038", "images": ["images/Shaft_02038.png", "detail_png/Shaft_02038_length.png", "detail_png/Shaft_02038_diam.png", "detail_png/Shaft_02038_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.6 mm and length at least 178.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.2 mm over length 62.6 mm (from Z=0.0 to Z=113.7).\n9. Finish turn diameter Ø31.8 mm over length 20.7 mm (from Z=0.0 to Z=51.1).\n10. Finish turn diameter Ø30.0 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00530", "images": ["images/Shaft_00530.png", "detail_png/Shaft_00530_length.png", "detail_png/Shaft_00530_diam.png", "detail_png/Shaft_00530_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 304.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 279.2 mm (from Z=0.0 to Z=279.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00082", "images": ["images/Shaft_00082.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.6 mm and length at least 229.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 84.7 mm (from Z=0.0 to Z=84.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.4 mm over length 9.8 mm (from Z=0.0 to Z=139.4).\n10. Finish turn diameter Ø41.7 mm over length 73.2 mm (from Z=0.0 to Z=129.6).\n11. Finish turn diameter Ø32.0 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00922", "images": ["images/Shaft_00922.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.1 mm and length at least 213.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 32.0 mm (from Z=0.0 to Z=32.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.1 mm over length 28.1 mm (from Z=0.0 to Z=176.2).\n10. Finish turn diameter Ø39.2 mm over length 39.6 mm (from Z=0.0 to Z=148.1).\n11. Finish turn diameter Ø35.1 mm over length 37.9 mm (from Z=0.0 to Z=108.5).\n12. Finish turn diameter Ø31.5 mm over length 34.1 mm (from Z=0.0 to Z=70.6).\n13. Finish turn diameter Ø30.0 mm over length 36.5 mm (from Z=0.0 to Z=36.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04497", "images": ["images/Shaft_04497.png", "detail_png/Shaft_04497_length.png", "detail_png/Shaft_04497_diam.png", "detail_png/Shaft_04497_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.2 mm and length at least 65.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.6 mm over length 15.3 mm (from Z=0.0 to Z=50.3).\n9. Finish turn diameter Ø35.3 mm over length 10.9 mm (from Z=0.0 to Z=35.0).\n10. Finish turn diameter Ø30.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03954", "images": ["images/Shaft_03954.png", "detail_png/Shaft_03954_length.png", "detail_png/Shaft_03954_diam.png", "detail_png/Shaft_03954_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.8 mm and length at least 136.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 103.4 mm (from Z=0.0 to Z=103.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00723", "images": ["images/Shaft_00723.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.2 mm and length at least 255.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 16.5 mm (from Z=0.0 to Z=230.1).\n10. Finish turn diameter Ø30.1 mm over length 74.9 mm (from Z=0.0 to Z=213.6).\n11. Finish turn diameter Ø30.0 mm over length 138.7 mm (from Z=0.0 to Z=138.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04982", "images": ["images/Shaft_04982.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.9 mm and length at least 248.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 31.1 mm (from Z=0.0 to Z=169.0).\n10. Finish turn diameter Ø31.5 mm over length 69.1 mm (from Z=0.0 to Z=137.9).\n11. Finish turn diameter Ø30.0 mm over length 68.8 mm (from Z=0.0 to Z=68.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04939", "images": ["images/Shaft_04939.png", "detail_png/Shaft_04939_length.png", "detail_png/Shaft_04939_diam.png", "detail_png/Shaft_04939_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.4 mm and length at least 183.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.8 mm over length 66.8 mm (from Z=0.0 to Z=141.2).\n9. Finish turn diameter Ø30.0 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00938", "images": ["images/Shaft_00938.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 172.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 145.4 mm (from Z=0.0 to Z=145.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.8 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00728", "images": ["images/Shaft_00728.png", "detail_png/Shaft_00728_length.png", "detail_png/Shaft_00728_diam.png", "detail_png/Shaft_00728_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.7 mm and length at least 155.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 58.9 mm (from Z=0.0 to Z=58.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.8 mm over length 52.1 mm (from Z=0.0 to Z=91.9).\n9. Finish turn diameter Ø56.4 mm over length 7.1 mm (from Z=0.0 to Z=39.8).\n10. Finish turn diameter Ø41.3 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02196", "images": ["images/Shaft_02196.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.0 mm and length at least 159.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 76.1 mm (from Z=0.0 to Z=76.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01635", "images": ["images/Shaft_01635.png", "detail_png/Shaft_01635_length.png", "detail_png/Shaft_01635_diam.png", "detail_png/Shaft_01635_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 273.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 171.5 mm (from Z=0.0 to Z=171.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.7 mm over length 97.2 mm (from Z=0.0 to Z=97.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02789", "images": ["images/Shaft_02789.png", "detail_png/Shaft_02789_length.png", "detail_png/Shaft_02789_diam.png", "detail_png/Shaft_02789_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.8 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03978", "images": ["images/Shaft_03978.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.1 mm and length at least 258.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.6 mm over length 24.7 mm (from Z=0.0 to Z=240.2).\n10. Finish turn diameter Ø48.1 mm over length 63.8 mm (from Z=0.0 to Z=215.5).\n11. Finish turn diameter Ø35.8 mm over length 70.0 mm (from Z=0.0 to Z=151.7).\n12. Finish turn diameter Ø30.0 mm over length 81.7 mm (from Z=0.0 to Z=81.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04346", "images": ["images/Shaft_04346.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.7 mm and length at least 291.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 43.7 mm (from Z=0.0 to Z=43.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.2 mm over length 67.2 mm (from Z=0.0 to Z=242.4).\n10. Finish turn diameter Ø49.7 mm over length 60.5 mm (from Z=0.0 to Z=175.2).\n11. Finish turn diameter Ø37.6 mm over length 54.8 mm (from Z=0.0 to Z=114.7).\n12. Finish turn diameter Ø30.0 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02690", "images": ["images/Shaft_02690.png", "detail_png/Shaft_02690_length.png", "detail_png/Shaft_02690_diam.png", "detail_png/Shaft_02690_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.7 mm and length at least 263.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.9 mm over length 27.4 mm (from Z=0.0 to Z=211.6).\n10. Finish turn diameter Ø47.0 mm over length 54.7 mm (from Z=0.0 to Z=184.2).\n11. Finish turn diameter Ø42.6 mm over length 22.3 mm (from Z=0.0 to Z=129.5).\n12. Finish turn diameter Ø35.2 mm over length 80.6 mm (from Z=0.0 to Z=107.2).\n13. Finish turn diameter Ø30.0 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03038", "images": ["images/Shaft_03038.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.6 mm and length at least 73.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.2 mm over length 10.3 mm (from Z=0.0 to Z=34.0).\n9. Finish turn diameter Ø58.5 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03918", "images": ["images/Shaft_03918.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.1 mm and length at least 93.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 27.6 mm (from Z=0.0 to Z=60.7).\n9. Finish turn diameter Ø52.2 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01750", "images": ["images/Shaft_01750.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.3 mm and length at least 319.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 43.7 mm (from Z=0.0 to Z=43.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.6 mm over length 35.5 mm (from Z=0.0 to Z=270.8).\n10. Finish turn diameter Ø45.5 mm over length 114.8 mm (from Z=0.0 to Z=235.3).\n11. Finish turn diameter Ø33.5 mm over length 28.0 mm (from Z=0.0 to Z=120.5).\n12. Finish turn diameter Ø30.0 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00592", "images": ["images/Shaft_00592.png", "detail_png/Shaft_00592_length.png", "detail_png/Shaft_00592_diam.png", "detail_png/Shaft_00592_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.7 mm and length at least 159.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.7 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.3 mm over length 55.4 mm (from Z=0.0 to Z=100.7).\n9. Finish turn diameter Ø30.0 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03186", "images": ["images/Shaft_03186.png", "detail_png/Shaft_03186_length.png", "detail_png/Shaft_03186_diam.png", "detail_png/Shaft_03186_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.1 mm and length at least 239.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.1 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.2 mm over length 12.0 mm (from Z=0.0 to Z=161.5).\n10. Finish turn diameter Ø57.6 mm over length 95.0 mm (from Z=0.0 to Z=149.5).\n11. Finish turn diameter Ø53.2 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03633", "images": ["images/Shaft_03633.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.9 mm and length at least 226.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.9 mm over length 95.8 mm (from Z=0.0 to Z=95.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.0 mm over length 68.0 mm (from Z=0.0 to Z=125.7).\n10. Finish turn diameter Ø37.4 mm over length 34.7 mm (from Z=0.0 to Z=57.7).\n11. Finish turn diameter Ø30.0 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04636", "images": ["images/Shaft_04636.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 244.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 200.4 mm (from Z=0.0 to Z=200.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.9 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02934", "images": ["images/Shaft_02934.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.3 mm and length at least 154.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.4 mm over length 29.9 mm (from Z=0.0 to Z=100.7).\n9. Finish turn diameter Ø30.9 mm over length 49.2 mm (from Z=0.0 to Z=70.8).\n10. Finish turn diameter Ø30.0 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03542", "images": ["images/Shaft_03542.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.6 mm and length at least 274.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.1 mm over length 41.1 mm (from Z=0.0 to Z=206.4).\n10. Finish turn diameter Ø64.9 mm over length 95.6 mm (from Z=0.0 to Z=165.3).\n11. Finish turn diameter Ø57.0 mm over length 69.7 mm (from Z=0.0 to Z=69.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04786", "images": ["images/Shaft_04786.png", "detail_png/Shaft_04786_length.png", "detail_png/Shaft_04786_diam.png", "detail_png/Shaft_04786_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.5 mm and length at least 276.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 25.0 mm (from Z=0.0 to Z=25.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.4 mm over length 22.7 mm (from Z=0.0 to Z=246.9).\n10. Finish turn diameter Ø34.1 mm over length 45.9 mm (from Z=0.0 to Z=224.2).\n11. Finish turn diameter Ø30.0 mm over length 178.3 mm (from Z=0.0 to Z=178.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04373", "images": ["images/Shaft_04373.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.7 mm and length at least 73.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.9 mm over length 9.6 mm (from Z=0.0 to Z=55.3).\n9. Finish turn diameter Ø50.2 mm over length 5.0 mm (from Z=0.0 to Z=45.7).\n10. Finish turn diameter Ø30.2 mm over length 20.5 mm (from Z=0.0 to Z=40.7).\n11. Finish turn diameter Ø30.0 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03027", "images": ["images/Shaft_03027.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.3 mm and length at least 65.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 7.2 mm (from Z=0.0 to Z=37.6).\n9. Finish turn diameter Ø33.8 mm over length 5.0 mm (from Z=0.0 to Z=30.4).\n10. Finish turn diameter Ø30.0 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02613", "images": ["images/Shaft_02613.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.2 mm and length at least 118.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.3 mm over length 19.4 mm (from Z=0.0 to Z=95.7).\n9. Finish turn diameter Ø30.0 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04523", "images": ["images/Shaft_04523.png", "detail_png/Shaft_04523_length.png", "detail_png/Shaft_04523_diam.png", "detail_png/Shaft_04523_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.1 mm and length at least 251.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 68.7 mm (from Z=0.0 to Z=68.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.6 mm (from Z=0.0 to Z=177.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00978", "images": ["images/Shaft_00978.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.1 mm and length at least 278.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.1 mm over length 103.8 mm (from Z=0.0 to Z=103.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.9 mm (from Z=0.0 to Z=169.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03472", "images": ["images/Shaft_03472.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 113.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 91.3 mm (from Z=0.0 to Z=91.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.9 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01357", "images": ["images/Shaft_01357.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.7 mm and length at least 244.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.7 mm over length 93.0 mm (from Z=0.0 to Z=93.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.4 mm over length 41.8 mm (from Z=0.0 to Z=146.3).\n10. Finish turn diameter Ø34.5 mm over length 37.0 mm (from Z=0.0 to Z=104.5).\n11. Finish turn diameter Ø30.0 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01134", "images": ["images/Shaft_01134.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.4 mm and length at least 245.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 35.3 mm (from Z=0.0 to Z=186.0).\n10. Finish turn diameter Ø30.0 mm over length 150.7 mm (from Z=0.0 to Z=150.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00789", "images": ["images/Shaft_00789.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.1 mm and length at least 299.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 109.2 mm (from Z=0.0 to Z=109.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.5 mm over length 69.7 mm (from Z=0.0 to Z=185.1).\n10. Finish turn diameter Ø47.4 mm over length 68.5 mm (from Z=0.0 to Z=115.4).\n11. Finish turn diameter Ø35.5 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04153", "images": ["images/Shaft_04153.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.1 mm and length at least 300.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 41.2 mm (from Z=0.0 to Z=196.8).\n10. Finish turn diameter Ø30.0 mm over length 155.6 mm (from Z=0.0 to Z=155.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02357", "images": ["images/Shaft_02357.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.8 mm and length at least 222.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.0 mm over length 9.0 mm (from Z=0.0 to Z=195.0).\n10. Finish turn diameter Ø30.0 mm over length 186.0 mm (from Z=0.0 to Z=186.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01410", "images": ["images/Shaft_01410.png", "detail_png/Shaft_01410_length.png", "detail_png/Shaft_01410_diam.png", "detail_png/Shaft_01410_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 278.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 222.4 mm (from Z=0.0 to Z=222.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 51.2 mm (from Z=0.0 to Z=51.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04872", "images": ["images/Shaft_04872.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 320.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 252.2 mm (from Z=0.0 to Z=252.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 63.7 mm (from Z=0.0 to Z=63.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00522", "images": ["images/Shaft_00522.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.7 mm and length at least 102.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.7 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.9 mm over length 14.5 mm (from Z=0.0 to Z=68.5).\n9. Finish turn diameter Ø58.0 mm over length 30.9 mm (from Z=0.0 to Z=54.0).\n10. Finish turn diameter Ø40.7 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00893", "images": ["images/Shaft_00893.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.1 mm and length at least 274.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.3 mm (from Z=0.0 to Z=204.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00397", "images": ["images/Shaft_00397.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.9 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.9 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 25.9 mm (from Z=0.0 to Z=88.0).\n9. Finish turn diameter Ø30.0 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04864", "images": ["images/Shaft_04864.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 269.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 213.1 mm (from Z=0.0 to Z=213.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.1 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02212", "images": ["images/Shaft_02212.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.9 mm and length at least 153.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.1 mm over length 56.0 mm (from Z=0.0 to Z=123.3).\n9. Finish turn diameter Ø59.3 mm over length 53.9 mm (from Z=0.0 to Z=67.3).\n10. Finish turn diameter Ø52.1 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01423", "images": ["images/Shaft_01423.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.8 mm and length at least 210.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 45.2 mm (from Z=0.0 to Z=164.6).\n10. Finish turn diameter Ø40.4 mm over length 32.1 mm (from Z=0.0 to Z=119.4).\n11. Finish turn diameter Ø30.0 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00079", "images": ["images/Shaft_00079.png", "detail_png/Shaft_00079_length.png", "detail_png/Shaft_00079_diam.png", "detail_png/Shaft_00079_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.0 mm and length at least 263.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.0 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 222.2 mm (from Z=0.0 to Z=222.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03285", "images": ["images/Shaft_03285.png", "detail_png/Shaft_03285_length.png", "detail_png/Shaft_03285_diam.png", "detail_png/Shaft_03285_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.3 mm and length at least 234.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.4 mm over length 27.9 mm (from Z=0.0 to Z=179.7).\n10. Finish turn diameter Ø38.5 mm over length 50.0 mm (from Z=0.0 to Z=151.8).\n11. Finish turn diameter Ø34.9 mm over length 49.2 mm (from Z=0.0 to Z=101.8).\n12. Finish turn diameter Ø30.0 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00145", "images": ["images/Shaft_00145.png", "detail_png/Shaft_00145_length.png", "detail_png/Shaft_00145_diam.png", "detail_png/Shaft_00145_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.3 mm and length at least 150.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 10.9 mm (from Z=0.0 to Z=88.1).\n9. Finish turn diameter Ø30.3 mm over length 28.7 mm (from Z=0.0 to Z=77.2).\n10. Finish turn diameter Ø30.0 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03807", "images": ["images/Shaft_03807.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.3 mm and length at least 262.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.3 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.7 mm over length 161.9 mm (from Z=0.0 to Z=184.5).\n10. Finish turn diameter Ø30.0 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03789", "images": ["images/Shaft_03789.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.6 mm and length at least 217.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 130.5 mm (from Z=0.0 to Z=130.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.6 mm over length 40.4 mm (from Z=0.0 to Z=82.3).\n10. Finish turn diameter Ø31.5 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01840", "images": ["images/Shaft_01840.png", "detail_png/Shaft_01840_length.png", "detail_png/Shaft_01840_diam.png", "detail_png/Shaft_01840_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.6 mm and length at least 144.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 21.9 mm (from Z=0.0 to Z=98.6).\n9. Finish turn diameter Ø30.0 mm over length 76.7 mm (from Z=0.0 to Z=76.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03209", "images": ["images/Shaft_03209.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.4 mm and length at least 100.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.9 mm over length 23.6 mm (from Z=0.0 to Z=84.6).\n9. Finish turn diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03590", "images": ["images/Shaft_03590.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 127.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.2 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04733", "images": ["images/Shaft_04733.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.2 mm and length at least 136.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.0 mm (from Z=0.0 to Z=102.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00828", "images": ["images/Shaft_00828.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.8 mm and length at least 227.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 56.2 mm (from Z=0.0 to Z=206.7).\n10. Finish turn diameter Ø30.0 mm over length 150.5 mm (from Z=0.0 to Z=150.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03659", "images": ["images/Shaft_03659.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.1 mm and length at least 319.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 76.4 mm (from Z=0.0 to Z=291.8).\n10. Finish turn diameter Ø56.1 mm over length 191.9 mm (from Z=0.0 to Z=215.4).\n11. Finish turn diameter Ø51.5 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01569", "images": ["images/Shaft_01569.png", "detail_png/Shaft_01569_length.png", "detail_png/Shaft_01569_diam.png", "detail_png/Shaft_01569_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.9 mm and length at least 293.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 102.7 mm (from Z=0.0 to Z=102.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.2 mm over length 48.7 mm (from Z=0.0 to Z=185.5).\n10. Finish turn diameter Ø30.0 mm over length 136.8 mm (from Z=0.0 to Z=136.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01025", "images": ["images/Shaft_01025.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.7 mm and length at least 77.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.6 mm over length 20.0 mm (from Z=0.0 to Z=58.7).\n9. Finish turn diameter Ø36.3 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02435", "images": ["images/Shaft_02435.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.2 mm and length at least 123.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.3 mm over length 28.2 mm (from Z=0.0 to Z=110.1).\n9. Finish turn diameter Ø38.6 mm over length 22.1 mm (from Z=0.0 to Z=81.9).\n10. Finish turn diameter Ø32.3 mm over length 27.4 mm (from Z=0.0 to Z=59.8).\n11. Finish turn diameter Ø30.0 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04715", "images": ["images/Shaft_04715.png", "detail_png/Shaft_04715_length.png", "detail_png/Shaft_04715_diam.png", "detail_png/Shaft_04715_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.5 mm and length at least 192.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.6 mm over length 83.0 mm (from Z=0.0 to Z=169.7).\n9. Finish turn diameter Ø41.0 mm over length 72.9 mm (from Z=0.0 to Z=86.7).\n10. Finish turn diameter Ø30.0 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04135", "images": ["images/Shaft_04135.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.7 mm and length at least 173.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 56.2 mm (from Z=0.0 to Z=56.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.6 mm over length 32.9 mm (from Z=0.0 to Z=112.6).\n9. Finish turn diameter Ø30.0 mm over length 79.7 mm (from Z=0.0 to Z=79.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00316", "images": ["images/Shaft_00316.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.8 mm and length at least 274.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.7 mm over length 37.7 mm (from Z=0.0 to Z=234.6).\n10. Finish turn diameter Ø30.0 mm over length 196.9 mm (from Z=0.0 to Z=196.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01759", "images": ["images/Shaft_01759.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.7 mm and length at least 130.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.0 mm (from Z=0.0 to Z=78.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02721", "images": ["images/Shaft_02721.png", "detail_png/Shaft_02721_length.png", "detail_png/Shaft_02721_diam.png", "detail_png/Shaft_02721_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.4 mm and length at least 272.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 119.8 mm (from Z=0.0 to Z=234.6).\n10. Finish turn diameter Ø30.0 mm over length 114.8 mm (from Z=0.0 to Z=114.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04850", "images": ["images/Shaft_04850.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.5 mm and length at least 241.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 29.2 mm (from Z=0.0 to Z=187.2).\n10. Finish turn diameter Ø30.0 mm over length 158.0 mm (from Z=0.0 to Z=158.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03268", "images": ["images/Shaft_03268.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.9 mm and length at least 183.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.3 mm over length 40.0 mm (from Z=0.0 to Z=147.9).\n10. Finish turn diameter Ø30.0 mm over length 107.9 mm (from Z=0.0 to Z=107.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03381", "images": ["images/Shaft_03381.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.8 mm and length at least 87.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.3 mm over length 7.4 mm (from Z=0.0 to Z=63.1).\n9. Finish turn diameter Ø41.7 mm over length 30.6 mm (from Z=0.0 to Z=55.7).\n10. Finish turn diameter Ø30.0 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04081", "images": ["images/Shaft_04081.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.3 mm and length at least 100.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.8 mm over length 21.4 mm (from Z=0.0 to Z=79.4).\n9. Finish turn diameter Ø35.7 mm over length 20.0 mm (from Z=0.0 to Z=58.0).\n10. Finish turn diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00768", "images": ["images/Shaft_00768.png", "detail_png/Shaft_00768_length.png", "detail_png/Shaft_00768_diam.png", "detail_png/Shaft_00768_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.7 mm and length at least 93.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.7 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 18.6 mm (from Z=0.0 to Z=62.0).\n9. Finish turn diameter Ø46.8 mm over length 31.3 mm (from Z=0.0 to Z=43.4).\n10. Finish turn diameter Ø34.2 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03482", "images": ["images/Shaft_03482.png", "detail_png/Shaft_03482_length.png", "detail_png/Shaft_03482_diam.png", "detail_png/Shaft_03482_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.4 mm and length at least 223.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 8.2 mm (from Z=0.0 to Z=8.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.0 mm over length 44.1 mm (from Z=0.0 to Z=210.5).\n10. Finish turn diameter Ø61.7 mm over length 54.2 mm (from Z=0.0 to Z=166.4).\n11. Finish turn diameter Ø54.6 mm over length 52.0 mm (from Z=0.0 to Z=112.2).\n12. Finish turn diameter Ø48.5 mm over length 6.6 mm (from Z=0.0 to Z=60.2).\n13. Finish turn diameter Ø40.9 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03212", "images": ["images/Shaft_03212.png", "detail_png/Shaft_03212_length.png", "detail_png/Shaft_03212_diam.png", "detail_png/Shaft_03212_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.9 mm and length at least 173.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 135.4 mm (from Z=0.0 to Z=135.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01574", "images": ["images/Shaft_01574.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.8 mm and length at least 98.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 10.8 mm (from Z=0.0 to Z=74.4).\n9. Finish turn diameter Ø40.5 mm over length 63.6 mm (from Z=0.0 to Z=63.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02545", "images": ["images/Shaft_02545.png", "detail_png/Shaft_02545_length.png", "detail_png/Shaft_02545_diam.png", "detail_png/Shaft_02545_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.9 mm and length at least 184.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 6.5 mm (from Z=0.0 to Z=6.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 39.9 mm (from Z=0.0 to Z=173.3).\n10. Finish turn diameter Ø30.0 mm over length 133.4 mm (from Z=0.0 to Z=133.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00779", "images": ["images/Shaft_00779.png", "detail_png/Shaft_00779_length.png", "detail_png/Shaft_00779_diam.png", "detail_png/Shaft_00779_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.0 mm and length at least 84.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 5.0 mm (from Z=0.0 to Z=67.1).\n9. Finish turn diameter Ø34.7 mm over length 21.4 mm (from Z=0.0 to Z=62.1).\n10. Finish turn diameter Ø30.0 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00526", "images": ["images/Shaft_00526.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.2 mm and length at least 245.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.6 mm over length 66.1 mm (from Z=0.0 to Z=212.0).\n10. Finish turn diameter Ø30.0 mm over length 145.9 mm (from Z=0.0 to Z=145.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03528", "images": ["images/Shaft_03528.png", "detail_png/Shaft_03528_length.png", "detail_png/Shaft_03528_diam.png", "detail_png/Shaft_03528_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.3 mm and length at least 242.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 112.1 mm (from Z=0.0 to Z=112.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.0 mm over length 66.6 mm (from Z=0.0 to Z=125.8).\n10. Finish turn diameter Ø40.9 mm over length 18.0 mm (from Z=0.0 to Z=59.2).\n11. Finish turn diameter Ø34.0 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03672", "images": ["images/Shaft_03672.png", "detail_png/Shaft_03672_length.png", "detail_png/Shaft_03672_diam.png", "detail_png/Shaft_03672_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.3 mm and length at least 235.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 124.9 mm (from Z=0.0 to Z=124.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03163", "images": ["images/Shaft_03163.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.3 mm and length at least 275.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.0 mm over length 143.8 mm (from Z=0.0 to Z=223.0).\n10. Finish turn diameter Ø50.1 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00170", "images": ["images/Shaft_00170.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.1 mm and length at least 270.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.6 mm over length 159.4 mm (from Z=0.0 to Z=235.1).\n10. Finish turn diameter Ø52.3 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04675", "images": ["images/Shaft_04675.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.5 mm and length at least 258.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 156.7 mm (from Z=0.0 to Z=156.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.4 mm over length 61.1 mm (from Z=0.0 to Z=97.2).\n10. Finish turn diameter Ø34.7 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04021", "images": ["images/Shaft_04021.png", "detail_png/Shaft_04021_length.png", "detail_png/Shaft_04021_diam.png", "detail_png/Shaft_04021_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.2 mm and length at least 138.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 6.1 mm (from Z=0.0 to Z=6.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 45.7 mm (from Z=0.0 to Z=127.4).\n9. Finish turn diameter Ø43.8 mm over length 5.8 mm (from Z=0.0 to Z=81.7).\n10. Finish turn diameter Ø36.6 mm over length 45.5 mm (from Z=0.0 to Z=75.9).\n11. Finish turn diameter Ø30.0 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03288", "images": ["images/Shaft_03288.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.1 mm and length at least 171.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.1 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.1 mm over length 27.3 mm (from Z=0.0 to Z=137.4).\n9. Finish turn diameter Ø55.2 mm over length 17.5 mm (from Z=0.0 to Z=110.1).\n10. Finish turn diameter Ø49.4 mm over length 92.6 mm (from Z=0.0 to Z=92.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03796", "images": ["images/Shaft_03796.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.1 mm and length at least 143.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.1 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.3 mm over length 38.7 mm (from Z=0.0 to Z=93.0).\n9. Finish turn diameter Ø59.1 mm over length 54.3 mm (from Z=0.0 to Z=54.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02304", "images": ["images/Shaft_02304.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.8 mm and length at least 107.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 5.4 mm (from Z=0.0 to Z=5.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.6 mm over length 24.8 mm (from Z=0.0 to Z=97.2).\n9. Finish turn diameter Ø40.0 mm over length 12.0 mm (from Z=0.0 to Z=72.4).\n10. Finish turn diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00887", "images": ["images/Shaft_00887.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.6 mm and length at least 150.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 87.4 mm (from Z=0.0 to Z=87.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01034", "images": ["images/Shaft_01034.png", "detail_png/Shaft_01034_length.png", "detail_png/Shaft_01034_diam.png", "detail_png/Shaft_01034_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.8 mm and length at least 113.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 31.7 mm (from Z=0.0 to Z=76.5).\n9. Finish turn diameter Ø30.0 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04946", "images": ["images/Shaft_04946.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.3 mm and length at least 87.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.0 mm over length 25.4 mm (from Z=0.0 to Z=74.0).\n9. Finish turn diameter Ø32.1 mm over length 26.5 mm (from Z=0.0 to Z=48.6).\n10. Finish turn diameter Ø30.0 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00903", "images": ["images/Shaft_00903.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.4 mm and length at least 225.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.4 mm over length 73.8 mm (from Z=0.0 to Z=160.4).\n10. Finish turn diameter Ø42.2 mm over length 44.0 mm (from Z=0.0 to Z=86.6).\n11. Finish turn diameter Ø30.0 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03369", "images": ["images/Shaft_03369.png", "detail_png/Shaft_03369_length.png", "detail_png/Shaft_03369_diam.png", "detail_png/Shaft_03369_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.5 mm and length at least 83.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.5 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.8 mm over length 12.8 mm (from Z=0.0 to Z=59.3).\n9. Finish turn diameter Ø30.0 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04344", "images": ["images/Shaft_04344.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.6 mm and length at least 178.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 37.0 mm (from Z=0.0 to Z=137.9).\n10. Finish turn diameter Ø30.0 mm over length 100.9 mm (from Z=0.0 to Z=100.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04711", "images": ["images/Shaft_04711.png", "detail_png/Shaft_04711_length.png", "detail_png/Shaft_04711_diam.png", "detail_png/Shaft_04711_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.2 mm and length at least 146.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 59.4 mm (from Z=0.0 to Z=115.9).\n9. Finish turn diameter Ø35.8 mm over length 27.6 mm (from Z=0.0 to Z=56.5).\n10. Finish turn diameter Ø30.0 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03475", "images": ["images/Shaft_03475.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.3 mm and length at least 219.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.5 mm over length 58.6 mm (from Z=0.0 to Z=168.3).\n10. Finish turn diameter Ø56.3 mm over length 54.9 mm (from Z=0.0 to Z=109.7).\n11. Finish turn diameter Ø43.9 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02203", "images": ["images/Shaft_02203.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.0 mm and length at least 156.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 104.4 mm (from Z=0.0 to Z=104.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00163", "images": ["images/Shaft_00163.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.9 mm and length at least 280.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 256.2 mm (from Z=0.0 to Z=256.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04002", "images": ["images/Shaft_04002.png", "detail_png/Shaft_04002_length.png", "detail_png/Shaft_04002_diam.png", "detail_png/Shaft_04002_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.1 mm and length at least 248.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 59.5 mm (from Z=0.0 to Z=217.4).\n10. Finish turn diameter Ø30.0 mm over length 157.9 mm (from Z=0.0 to Z=157.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03533", "images": ["images/Shaft_03533.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.3 mm and length at least 101.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.3 mm over length 10.4 mm (from Z=0.0 to Z=91.6).\n9. Finish turn diameter Ø42.3 mm over length 18.6 mm (from Z=0.0 to Z=81.2).\n10. Finish turn diameter Ø33.0 mm over length 22.3 mm (from Z=0.0 to Z=62.6).\n11. Finish turn diameter Ø30.0 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04215", "images": ["images/Shaft_04215.png", "detail_png/Shaft_04215_length.png", "detail_png/Shaft_04215_diam.png", "detail_png/Shaft_04215_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.5 mm and length at least 252.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.3 mm over length 55.4 mm (from Z=0.0 to Z=195.2).\n10. Finish turn diameter Ø30.0 mm over length 139.8 mm (from Z=0.0 to Z=139.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02686", "images": ["images/Shaft_02686.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 89.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.8 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00584", "images": ["images/Shaft_00584.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.4 mm and length at least 90.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.8 mm over length 12.0 mm (from Z=0.0 to Z=49.6).\n9. Finish turn diameter Ø30.0 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02296", "images": ["images/Shaft_02296.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.2 mm and length at least 263.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 77.3 mm (from Z=0.0 to Z=77.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.2 mm (from Z=0.0 to Z=181.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00509", "images": ["images/Shaft_00509.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 263.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.4 mm (from Z=0.0 to Z=221.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.3 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00361", "images": ["images/Shaft_00361.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.6 mm and length at least 306.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.4 mm over length 63.7 mm (from Z=0.0 to Z=274.7).\n10. Finish turn diameter Ø42.2 mm over length 98.3 mm (from Z=0.0 to Z=211.0).\n11. Finish turn diameter Ø30.0 mm over length 112.7 mm (from Z=0.0 to Z=112.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00868", "images": ["images/Shaft_00868.png", "detail_png/Shaft_00868_length.png", "detail_png/Shaft_00868_diam.png", "detail_png/Shaft_00868_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.9 mm and length at least 168.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 26.2 mm (from Z=0.0 to Z=151.2).\n9. Finish turn diameter Ø31.5 mm over length 48.4 mm (from Z=0.0 to Z=125.0).\n10. Finish turn diameter Ø30.0 mm over length 76.6 mm (from Z=0.0 to Z=76.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02248", "images": ["images/Shaft_02248.png", "detail_png/Shaft_02248_length.png", "detail_png/Shaft_02248_diam.png", "detail_png/Shaft_02248_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.9 mm and length at least 323.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 70.0 mm (from Z=0.0 to Z=70.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.3 mm over length 91.5 mm (from Z=0.0 to Z=248.6).\n10. Finish turn diameter Ø42.6 mm over length 17.0 mm (from Z=0.0 to Z=157.1).\n11. Finish turn diameter Ø35.6 mm over length 46.0 mm (from Z=0.0 to Z=140.1).\n12. Finish turn diameter Ø30.0 mm over length 94.1 mm (from Z=0.0 to Z=94.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03459", "images": ["images/Shaft_03459.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.7 mm and length at least 163.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 53.9 mm (from Z=0.0 to Z=53.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 40.1 mm (from Z=0.0 to Z=104.9).\n9. Finish turn diameter Ø39.0 mm over length 44.4 mm (from Z=0.0 to Z=64.8).\n10. Finish turn diameter Ø30.0 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03289", "images": ["images/Shaft_03289.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 314.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 182.6 mm (from Z=0.0 to Z=182.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.0 mm over length 127.3 mm (from Z=0.0 to Z=127.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02810", "images": ["images/Shaft_02810.png", "detail_png/Shaft_02810_length.png", "detail_png/Shaft_02810_diam.png", "detail_png/Shaft_02810_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.9 mm and length at least 188.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 145.3 mm (from Z=0.0 to Z=145.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00956", "images": ["images/Shaft_00956.png", "detail_png/Shaft_00956_length.png", "detail_png/Shaft_00956_diam.png", "detail_png/Shaft_00956_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.9 mm and length at least 127.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.5 mm over length 33.7 mm (from Z=0.0 to Z=91.3).\n9. Finish turn diameter Ø68.2 mm over length 5.7 mm (from Z=0.0 to Z=57.6).\n10. Finish turn diameter Ø58.3 mm over length 31.2 mm (from Z=0.0 to Z=51.9).\n11. Finish turn diameter Ø47.0 mm over length 5.5 mm (from Z=0.0 to Z=20.7).\n12. Finish turn diameter Ø37.3 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01551", "images": ["images/Shaft_01551.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 101.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.9 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03279", "images": ["images/Shaft_03279.png", "detail_png/Shaft_03279_length.png", "detail_png/Shaft_03279_diam.png", "detail_png/Shaft_03279_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 137.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.0 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04315", "images": ["images/Shaft_04315.png", "detail_png/Shaft_04315_length.png", "detail_png/Shaft_04315_diam.png", "detail_png/Shaft_04315_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.4 mm and length at least 201.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 25.7 mm (from Z=0.0 to Z=168.1).\n10. Finish turn diameter Ø30.0 mm over length 142.4 mm (from Z=0.0 to Z=142.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03527", "images": ["images/Shaft_03527.png", "detail_png/Shaft_03527_length.png", "detail_png/Shaft_03527_diam.png", "detail_png/Shaft_03527_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.3 mm and length at least 195.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.5 mm over length 10.0 mm (from Z=0.0 to Z=133.7).\n10. Finish turn diameter Ø39.9 mm over length 49.9 mm (from Z=0.0 to Z=123.7).\n11. Finish turn diameter Ø32.5 mm over length 52.5 mm (from Z=0.0 to Z=73.8).\n12. Finish turn diameter Ø30.0 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02863", "images": ["images/Shaft_02863.png", "detail_png/Shaft_02863_length.png", "detail_png/Shaft_02863_diam.png", "detail_png/Shaft_02863_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.6 mm and length at least 147.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.9 mm (from Z=0.0 to Z=111.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01208", "images": ["images/Shaft_01208.png", "detail_png/Shaft_01208_length.png", "detail_png/Shaft_01208_diam.png", "detail_png/Shaft_01208_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.9 mm and length at least 92.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.0 mm over length 30.0 mm (from Z=0.0 to Z=52.9).\n9. Finish turn diameter Ø30.0 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03329", "images": ["images/Shaft_03329.png", "detail_png/Shaft_03329_length.png", "detail_png/Shaft_03329_diam.png", "detail_png/Shaft_03329_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.2 mm and length at least 72.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.2 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04074", "images": ["images/Shaft_04074.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.3 mm and length at least 228.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.9 mm over length 7.9 mm (from Z=0.0 to Z=215.2).\n10. Finish turn diameter Ø34.4 mm over length 24.9 mm (from Z=0.0 to Z=207.3).\n11. Finish turn diameter Ø31.1 mm over length 90.7 mm (from Z=0.0 to Z=182.4).\n12. Finish turn diameter Ø30.0 mm over length 91.7 mm (from Z=0.0 to Z=91.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03618", "images": ["images/Shaft_03618.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.2 mm and length at least 176.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.2 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.8 mm over length 22.3 mm (from Z=0.0 to Z=117.2).\n10. Finish turn diameter Ø30.0 mm over length 94.9 mm (from Z=0.0 to Z=94.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02739", "images": ["images/Shaft_02739.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.7 mm and length at least 232.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.7 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.8 mm over length 20.4 mm (from Z=0.0 to Z=164.2).\n10. Finish turn diameter Ø30.0 mm over length 143.8 mm (from Z=0.0 to Z=143.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01857", "images": ["images/Shaft_01857.png", "detail_png/Shaft_01857_length.png", "detail_png/Shaft_01857_diam.png", "detail_png/Shaft_01857_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.6 mm and length at least 109.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 21.8 mm (from Z=0.0 to Z=91.5).\n9. Finish turn diameter Ø44.4 mm over length 17.6 mm (from Z=0.0 to Z=69.7).\n10. Finish turn diameter Ø30.0 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02147", "images": ["images/Shaft_02147.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.5 mm and length at least 279.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 51.3 mm (from Z=0.0 to Z=51.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.4 mm over length 67.2 mm (from Z=0.0 to Z=223.1).\n10. Finish turn diameter Ø55.9 mm over length 37.5 mm (from Z=0.0 to Z=155.9).\n11. Finish turn diameter Ø45.4 mm over length 59.2 mm (from Z=0.0 to Z=118.4).\n12. Finish turn diameter Ø30.0 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02432", "images": ["images/Shaft_02432.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.6 mm and length at least 287.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.2 mm over length 62.6 mm (from Z=0.0 to Z=233.4).\n10. Finish turn diameter Ø30.0 mm over length 170.8 mm (from Z=0.0 to Z=170.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01006", "images": ["images/Shaft_01006.png", "detail_png/Shaft_01006_length.png", "detail_png/Shaft_01006_diam.png", "detail_png/Shaft_01006_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.4 mm and length at least 223.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 97.7 mm (from Z=0.0 to Z=97.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.0 mm over length 44.4 mm (from Z=0.0 to Z=120.9).\n10. Finish turn diameter Ø37.4 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02648", "images": ["images/Shaft_02648.png", "detail_png/Shaft_02648_length.png", "detail_png/Shaft_02648_diam.png", "detail_png/Shaft_02648_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.9 mm and length at least 250.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.5 mm over length 24.1 mm (from Z=0.0 to Z=173.7).\n10. Finish turn diameter Ø32.3 mm over length 83.4 mm (from Z=0.0 to Z=149.6).\n11. Finish turn diameter Ø30.0 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02998", "images": ["images/Shaft_02998.png", "detail_png/Shaft_02998_length.png", "detail_png/Shaft_02998_diam.png", "detail_png/Shaft_02998_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 266.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 196.5 mm (from Z=0.0 to Z=196.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02136", "images": ["images/Shaft_02136.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.7 mm and length at least 224.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.4 mm (from Z=0.0 to Z=166.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02283", "images": ["images/Shaft_02283.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.1 mm and length at least 304.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.9 mm over length 16.3 mm (from Z=0.0 to Z=251.1).\n10. Finish turn diameter Ø52.8 mm over length 60.4 mm (from Z=0.0 to Z=234.8).\n11. Finish turn diameter Ø41.3 mm over length 74.5 mm (from Z=0.0 to Z=174.4).\n12. Finish turn diameter Ø30.0 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04023", "images": ["images/Shaft_04023.png", "detail_png/Shaft_04023_length.png", "detail_png/Shaft_04023_diam.png", "detail_png/Shaft_04023_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.4 mm and length at least 94.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.4 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.4 mm over length 37.3 mm (from Z=0.0 to Z=45.6).\n9. Finish turn diameter Ø30.0 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04406", "images": ["images/Shaft_04406.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.5 mm and length at least 126.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.5 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.2 mm over length 31.1 mm (from Z=0.0 to Z=91.0).\n9. Finish turn diameter Ø36.4 mm over length 24.2 mm (from Z=0.0 to Z=59.9).\n10. Finish turn diameter Ø30.0 mm over length 35.7 mm (from Z=0.0 to Z=35.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02087", "images": ["images/Shaft_02087.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.3 mm and length at least 246.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.3 mm over length 65.3 mm (from Z=0.0 to Z=65.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.4 mm over length 21.1 mm (from Z=0.0 to Z=176.2).\n10. Finish turn diameter Ø48.4 mm over length 21.1 mm (from Z=0.0 to Z=155.1).\n11. Finish turn diameter Ø30.2 mm over length 75.5 mm (from Z=0.0 to Z=134.0).\n12. Finish turn diameter Ø30.0 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00455", "images": ["images/Shaft_00455.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.0 mm and length at least 164.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 50.0 mm (from Z=0.0 to Z=124.6).\n9. Finish turn diameter Ø43.1 mm over length 20.5 mm (from Z=0.0 to Z=74.6).\n10. Finish turn diameter Ø34.4 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03974", "images": ["images/Shaft_03974.png", "detail_png/Shaft_03974_length.png", "detail_png/Shaft_03974_diam.png", "detail_png/Shaft_03974_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.3 mm and length at least 118.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.3 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.6 mm over length 15.5 mm (from Z=0.0 to Z=102.7).\n9. Finish turn diameter Ø30.0 mm over length 87.2 mm (from Z=0.0 to Z=87.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03328", "images": ["images/Shaft_03328.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.8 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.8 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 70.3 mm (from Z=0.0 to Z=139.0).\n9. Finish turn diameter Ø30.0 mm over length 68.7 mm (from Z=0.0 to Z=68.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01104", "images": ["images/Shaft_01104.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.7 mm and length at least 229.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.6 mm over length 37.8 mm (from Z=0.0 to Z=193.3).\n10. Finish turn diameter Ø33.5 mm over length 43.5 mm (from Z=0.0 to Z=155.5).\n11. Finish turn diameter Ø30.0 mm over length 112.0 mm (from Z=0.0 to Z=112.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02247", "images": ["images/Shaft_02247.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.4 mm and length at least 149.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.4 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 34.2 mm (from Z=0.0 to Z=104.6).\n9. Finish turn diameter Ø30.0 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01864", "images": ["images/Shaft_01864.png", "detail_png/Shaft_01864_length.png", "detail_png/Shaft_01864_diam.png", "detail_png/Shaft_01864_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.7 mm and length at least 270.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 64.9 mm (from Z=0.0 to Z=64.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.1 mm (from Z=0.0 to Z=200.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02973", "images": ["images/Shaft_02973.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.3 mm and length at least 286.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 91.0 mm (from Z=0.0 to Z=221.3).\n10. Finish turn diameter Ø54.2 mm over length 130.3 mm (from Z=0.0 to Z=130.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04276", "images": ["images/Shaft_04276.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.5 mm and length at least 195.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.4 mm over length 27.5 mm (from Z=0.0 to Z=141.8).\n10. Finish turn diameter Ø48.8 mm over length 40.0 mm (from Z=0.0 to Z=114.3).\n11. Finish turn diameter Ø44.2 mm over length 43.5 mm (from Z=0.0 to Z=74.3).\n12. Finish turn diameter Ø32.2 mm over length 18.8 mm (from Z=0.0 to Z=30.8).\n13. Finish turn diameter Ø30.0 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02180", "images": ["images/Shaft_02180.png", "detail_png/Shaft_02180_length.png", "detail_png/Shaft_02180_diam.png", "detail_png/Shaft_02180_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 224.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 176.4 mm (from Z=0.0 to Z=176.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.9 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00048", "images": ["images/Shaft_00048.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.5 mm and length at least 157.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 138.9 mm (from Z=0.0 to Z=138.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03096", "images": ["images/Shaft_03096.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.6 mm and length at least 163.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.9 mm over length 30.2 mm (from Z=0.0 to Z=107.1).\n9. Finish turn diameter Ø30.0 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00849", "images": ["images/Shaft_00849.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.0 mm and length at least 317.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.0 mm over length 106.3 mm (from Z=0.0 to Z=106.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.4 mm over length 25.0 mm (from Z=0.0 to Z=206.4).\n10. Finish turn diameter Ø31.7 mm over length 33.5 mm (from Z=0.0 to Z=181.4).\n11. Finish turn diameter Ø30.0 mm over length 147.9 mm (from Z=0.0 to Z=147.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02845", "images": ["images/Shaft_02845.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.8 mm and length at least 162.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 58.1 mm (from Z=0.0 to Z=58.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.8 mm over length 60.0 mm (from Z=0.0 to Z=99.4).\n9. Finish turn diameter Ø47.9 mm over length 8.5 mm (from Z=0.0 to Z=39.4).\n10. Finish turn diameter Ø38.0 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02051", "images": ["images/Shaft_02051.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.4 mm and length at least 265.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.4 mm over length 15.1 mm (from Z=0.0 to Z=198.5).\n10. Finish turn diameter Ø52.5 mm over length 47.6 mm (from Z=0.0 to Z=183.4).\n11. Finish turn diameter Ø37.6 mm over length 78.6 mm (from Z=0.0 to Z=135.8).\n12. Finish turn diameter Ø30.0 mm over length 57.2 mm (from Z=0.0 to Z=57.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00650", "images": ["images/Shaft_00650.png", "detail_png/Shaft_00650_length.png", "detail_png/Shaft_00650_diam.png", "detail_png/Shaft_00650_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.7 mm and length at least 150.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 62.4 mm (from Z=0.0 to Z=106.8).\n9. Finish turn diameter Ø39.5 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03969", "images": ["images/Shaft_03969.png", "detail_png/Shaft_03969_length.png", "detail_png/Shaft_03969_diam.png", "detail_png/Shaft_03969_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 164.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 112.0 mm (from Z=0.0 to Z=112.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.6 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04641", "images": ["images/Shaft_04641.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.0 mm and length at least 69.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.8 mm over length 15.5 mm (from Z=0.0 to Z=47.4).\n9. Finish turn diameter Ø30.0 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01355", "images": ["images/Shaft_01355.png", "detail_png/Shaft_01355_length.png", "detail_png/Shaft_01355_diam.png", "detail_png/Shaft_01355_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.4 mm and length at least 271.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.2 mm over length 52.8 mm (from Z=0.0 to Z=220.3).\n10. Finish turn diameter Ø35.6 mm over length 48.4 mm (from Z=0.0 to Z=167.5).\n11. Finish turn diameter Ø30.0 mm over length 119.1 mm (from Z=0.0 to Z=119.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04491", "images": ["images/Shaft_04491.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.6 mm and length at least 243.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.6 mm over length 89.2 mm (from Z=0.0 to Z=165.0).\n10. Finish turn diameter Ø30.0 mm over length 75.8 mm (from Z=0.0 to Z=75.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03388", "images": ["images/Shaft_03388.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.2 mm and length at least 228.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.3 mm over length 32.5 mm (from Z=0.0 to Z=173.4).\n10. Finish turn diameter Ø33.9 mm over length 22.0 mm (from Z=0.0 to Z=140.9).\n11. Finish turn diameter Ø30.0 mm over length 118.9 mm (from Z=0.0 to Z=118.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04267", "images": ["images/Shaft_04267.png", "detail_png/Shaft_04267_length.png", "detail_png/Shaft_04267_diam.png", "detail_png/Shaft_04267_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.8 mm and length at least 319.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 230.9 mm (from Z=0.0 to Z=230.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01432", "images": ["images/Shaft_01432.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.0 mm and length at least 206.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.7 mm over length 53.8 mm (from Z=0.0 to Z=138.3).\n10. Finish turn diameter Ø30.0 mm over length 84.5 mm (from Z=0.0 to Z=84.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04814", "images": ["images/Shaft_04814.png", "detail_png/Shaft_04814_length.png", "detail_png/Shaft_04814_diam.png", "detail_png/Shaft_04814_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.4 mm and length at least 292.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.4 mm over length 151.5 mm (from Z=0.0 to Z=151.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.8 mm over length 108.1 mm (from Z=0.0 to Z=135.9).\n10. Finish turn diameter Ø52.5 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04640", "images": ["images/Shaft_04640.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.4 mm and length at least 208.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 63.2 mm (from Z=0.0 to Z=63.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 15.8 mm (from Z=0.0 to Z=140.1).\n10. Finish turn diameter Ø58.0 mm over length 95.7 mm (from Z=0.0 to Z=124.3).\n11. Finish turn diameter Ø49.2 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01274", "images": ["images/Shaft_01274.png", "detail_png/Shaft_01274_length.png", "detail_png/Shaft_01274_diam.png", "detail_png/Shaft_01274_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.7 mm and length at least 313.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.3 mm over length 13.0 mm (from Z=0.0 to Z=296.1).\n10. Finish turn diameter Ø30.0 mm over length 283.1 mm (from Z=0.0 to Z=283.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04031", "images": ["images/Shaft_04031.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.5 mm and length at least 109.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.9 mm (from Z=0.0 to Z=84.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01601", "images": ["images/Shaft_01601.png", "detail_png/Shaft_01601_length.png", "detail_png/Shaft_01601_diam.png", "detail_png/Shaft_01601_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.0 mm and length at least 306.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.0 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 242.6 mm (from Z=0.0 to Z=242.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02683", "images": ["images/Shaft_02683.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.7 mm and length at least 227.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 63.7 mm (from Z=0.0 to Z=63.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 49.9 mm (from Z=0.0 to Z=158.4).\n10. Finish turn diameter Ø30.5 mm over length 48.1 mm (from Z=0.0 to Z=108.5).\n11. Finish turn diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02046", "images": ["images/Shaft_02046.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.4 mm and length at least 219.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.4 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.0 mm over length 34.5 mm (from Z=0.0 to Z=202.7).\n10. Finish turn diameter Ø30.0 mm over length 168.2 mm (from Z=0.0 to Z=168.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00122", "images": ["images/Shaft_00122.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.2 mm and length at least 138.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.8 mm over length 29.1 mm (from Z=0.0 to Z=102.6).\n9. Finish turn diameter Ø30.6 mm over length 25.0 mm (from Z=0.0 to Z=73.5).\n10. Finish turn diameter Ø30.0 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00162", "images": ["images/Shaft_00162.png", "detail_png/Shaft_00162_length.png", "detail_png/Shaft_00162_diam.png", "detail_png/Shaft_00162_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.4 mm and length at least 291.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.3 mm over length 70.0 mm (from Z=0.0 to Z=258.5).\n10. Finish turn diameter Ø35.0 mm over length 67.0 mm (from Z=0.0 to Z=188.5).\n11. Finish turn diameter Ø30.0 mm over length 121.5 mm (from Z=0.0 to Z=121.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00498", "images": ["images/Shaft_00498.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.2 mm and length at least 246.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 97.1 mm (from Z=0.0 to Z=97.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 42.0 mm (from Z=0.0 to Z=144.5).\n10. Finish turn diameter Ø35.4 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03544", "images": ["images/Shaft_03544.png", "detail_png/Shaft_03544_length.png", "detail_png/Shaft_03544_diam.png", "detail_png/Shaft_03544_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.7 mm and length at least 194.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 17.6 mm (from Z=0.0 to Z=143.3).\n10. Finish turn diameter Ø30.0 mm over length 125.7 mm (from Z=0.0 to Z=125.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02953", "images": ["images/Shaft_02953.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.2 mm and length at least 280.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.2 mm over length 84.8 mm (from Z=0.0 to Z=84.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.2 mm (from Z=0.0 to Z=190.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01780", "images": ["images/Shaft_01780.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.9 mm and length at least 67.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.4 mm over length 35.5 mm (from Z=0.0 to Z=40.8).\n9. Finish turn diameter Ø30.0 mm over length 5.3 mm (from Z=0.0 to Z=5.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01835", "images": ["images/Shaft_01835.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.0 mm and length at least 207.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.9 mm over length 28.5 mm (from Z=0.0 to Z=141.9).\n10. Finish turn diameter Ø46.6 mm over length 28.9 mm (from Z=0.0 to Z=113.4).\n11. Finish turn diameter Ø38.8 mm over length 11.5 mm (from Z=0.0 to Z=84.5).\n12. Finish turn diameter Ø32.6 mm over length 52.8 mm (from Z=0.0 to Z=73.0).\n13. Finish turn diameter Ø30.0 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00043", "images": ["images/Shaft_00043.png", "detail_png/Shaft_00043_length.png", "detail_png/Shaft_00043_diam.png", "detail_png/Shaft_00043_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.1 mm and length at least 322.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 87.9 mm (from Z=0.0 to Z=87.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.2 mm (from Z=0.0 to Z=229.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02509", "images": ["images/Shaft_02509.png", "detail_png/Shaft_02509_length.png", "detail_png/Shaft_02509_diam.png", "detail_png/Shaft_02509_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.2 mm and length at least 252.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 12.4 mm (from Z=0.0 to Z=12.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.8 mm over length 93.8 mm (from Z=0.0 to Z=234.7).\n10. Finish turn diameter Ø58.9 mm over length 31.6 mm (from Z=0.0 to Z=140.9).\n11. Finish turn diameter Ø55.8 mm over length 89.3 mm (from Z=0.0 to Z=109.3).\n12. Finish turn diameter Ø41.9 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04614", "images": ["images/Shaft_04614.png", "detail_png/Shaft_04614_length.png", "detail_png/Shaft_04614_diam.png", "detail_png/Shaft_04614_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.0 mm and length at least 83.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 18.9 mm (from Z=0.0 to Z=53.9).\n9. Finish turn diameter Ø42.9 mm over length 17.3 mm (from Z=0.0 to Z=35.0).\n10. Finish turn diameter Ø30.0 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03112", "images": ["images/Shaft_03112.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.4 mm and length at least 179.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.4 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 67.5 mm (from Z=0.0 to Z=117.5).\n9. Finish turn diameter Ø49.2 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00476", "images": ["images/Shaft_00476.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.4 mm and length at least 227.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.4 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.6 mm over length 58.7 mm (from Z=0.0 to Z=152.5).\n10. Finish turn diameter Ø46.8 mm over length 15.2 mm (from Z=0.0 to Z=93.8).\n11. Finish turn diameter Ø30.0 mm over length 78.6 mm (from Z=0.0 to Z=78.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02174", "images": ["images/Shaft_02174.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.9 mm and length at least 309.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 92.4 mm (from Z=0.0 to Z=92.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 36.5 mm (from Z=0.0 to Z=211.7).\n10. Finish turn diameter Ø30.0 mm over length 175.2 mm (from Z=0.0 to Z=175.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04752", "images": ["images/Shaft_04752.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.4 mm and length at least 245.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.3 mm (from Z=0.0 to Z=181.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04250", "images": ["images/Shaft_04250.png", "detail_png/Shaft_04250_length.png", "detail_png/Shaft_04250_diam.png", "detail_png/Shaft_04250_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 252.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 110.3 mm (from Z=0.0 to Z=110.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.3 mm over length 136.8 mm (from Z=0.0 to Z=136.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01275", "images": ["images/Shaft_01275.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.4 mm and length at least 163.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.4 mm (from Z=0.0 to Z=100.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00686", "images": ["images/Shaft_00686.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 72.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 53.5 mm (from Z=0.0 to Z=53.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.3 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01817", "images": ["images/Shaft_01817.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.3 mm and length at least 274.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 240.7 mm (from Z=0.0 to Z=240.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00987", "images": ["images/Shaft_00987.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.6 mm and length at least 99.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.8 mm over length 5.0 mm (from Z=0.0 to Z=74.4).\n9. Finish turn diameter Ø37.1 mm over length 11.4 mm (from Z=0.0 to Z=69.4).\n10. Finish turn diameter Ø30.0 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03483", "images": ["images/Shaft_03483.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.9 mm and length at least 263.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.2 mm over length 29.2 mm (from Z=0.0 to Z=194.2).\n10. Finish turn diameter Ø31.5 mm over length 41.2 mm (from Z=0.0 to Z=165.0).\n11. Finish turn diameter Ø30.0 mm over length 123.8 mm (from Z=0.0 to Z=123.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04016", "images": ["images/Shaft_04016.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.3 mm and length at least 253.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 202.1 mm (from Z=0.0 to Z=202.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02577", "images": ["images/Shaft_02577.png", "detail_png/Shaft_02577_length.png", "detail_png/Shaft_02577_diam.png", "detail_png/Shaft_02577_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.8 mm and length at least 160.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.7 mm over length 52.0 mm (from Z=0.0 to Z=78.0).\n9. Finish turn diameter Ø44.1 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00272", "images": ["images/Shaft_00272.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.8 mm and length at least 78.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.2 mm over length 18.1 mm (from Z=0.0 to Z=60.2).\n9. Finish turn diameter Ø30.0 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00795", "images": ["images/Shaft_00795.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.7 mm and length at least 293.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.7 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 38.1 mm (from Z=0.0 to Z=233.2).\n10. Finish turn diameter Ø33.0 mm over length 22.4 mm (from Z=0.0 to Z=195.1).\n11. Finish turn diameter Ø30.0 mm over length 172.7 mm (from Z=0.0 to Z=172.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00664", "images": ["images/Shaft_00664.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.3 mm and length at least 184.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 64.0 mm (from Z=0.0 to Z=64.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 66.6 mm (from Z=0.0 to Z=115.4).\n9. Finish turn diameter Ø33.2 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04011", "images": ["images/Shaft_04011.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.6 mm and length at least 226.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 69.7 mm (from Z=0.0 to Z=69.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 151.3 mm (from Z=0.0 to Z=151.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00515", "images": ["images/Shaft_00515.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.1 mm and length at least 186.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.1 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.2 mm over length 68.3 mm (from Z=0.0 to Z=87.6).\n9. Finish turn diameter Ø44.0 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04175", "images": ["images/Shaft_04175.png", "detail_png/Shaft_04175_length.png", "detail_png/Shaft_04175_diam.png", "detail_png/Shaft_04175_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.1 mm and length at least 78.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.3 mm over length 19.0 mm (from Z=0.0 to Z=52.7).\n9. Finish turn diameter Ø33.7 mm over length 7.4 mm (from Z=0.0 to Z=33.7).\n10. Finish turn diameter Ø30.0 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01354", "images": ["images/Shaft_01354.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.9 mm and length at least 80.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.9 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.6 mm over length 21.6 mm (from Z=0.0 to Z=58.2).\n9. Finish turn diameter Ø30.0 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02404", "images": ["images/Shaft_02404.png", "detail_png/Shaft_02404_length.png", "detail_png/Shaft_02404_diam.png", "detail_png/Shaft_02404_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.7 mm and length at least 178.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 56.9 mm (from Z=0.0 to Z=135.9).\n9. Finish turn diameter Ø35.0 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01861", "images": ["images/Shaft_01861.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.8 mm and length at least 280.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.8 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 253.2 mm (from Z=0.0 to Z=253.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04656", "images": ["images/Shaft_04656.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.7 mm and length at least 87.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.7 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 58.9 mm (from Z=0.0 to Z=58.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01866", "images": ["images/Shaft_01866.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.6 mm and length at least 253.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.0 mm over length 90.6 mm (from Z=0.0 to Z=228.5).\n10. Finish turn diameter Ø38.9 mm over length 19.0 mm (from Z=0.0 to Z=137.9).\n11. Finish turn diameter Ø30.0 mm over length 118.9 mm (from Z=0.0 to Z=118.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03269", "images": ["images/Shaft_03269.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.8 mm and length at least 68.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 9.3 mm (from Z=0.0 to Z=9.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.3 mm over length 9.3 mm (from Z=0.0 to Z=54.4).\n9. Finish turn diameter Ø50.8 mm over length 10.9 mm (from Z=0.0 to Z=45.1).\n10. Finish turn diameter Ø44.7 mm over length 5.7 mm (from Z=0.0 to Z=34.2).\n11. Finish turn diameter Ø38.1 mm over length 13.2 mm (from Z=0.0 to Z=28.5).\n12. Finish turn diameter Ø30.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03592", "images": ["images/Shaft_03592.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.2 mm and length at least 93.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 74.8 mm (from Z=0.0 to Z=74.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00137", "images": ["images/Shaft_00137.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.7 mm and length at least 88.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 9.4 mm (from Z=0.0 to Z=50.5).\n9. Finish turn diameter Ø43.9 mm over length 13.3 mm (from Z=0.0 to Z=41.1).\n10. Finish turn diameter Ø39.7 mm over length 19.2 mm (from Z=0.0 to Z=27.8).\n11. Finish turn diameter Ø30.0 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01328", "images": ["images/Shaft_01328.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.3 mm and length at least 71.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.3 mm over length 7.3 mm (from Z=0.0 to Z=57.5).\n9. Finish turn diameter Ø30.0 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01315", "images": ["images/Shaft_01315.png", "detail_png/Shaft_01315_length.png", "detail_png/Shaft_01315_diam.png", "detail_png/Shaft_01315_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.0 mm and length at least 234.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.0 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.8 mm over length 45.2 mm (from Z=0.0 to Z=168.8).\n10. Finish turn diameter Ø30.0 mm over length 123.6 mm (from Z=0.0 to Z=123.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04735", "images": ["images/Shaft_04735.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.7 mm and length at least 238.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.4 mm over length 22.2 mm (from Z=0.0 to Z=218.4).\n10. Finish turn diameter Ø30.0 mm over length 196.2 mm (from Z=0.0 to Z=196.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00135", "images": ["images/Shaft_00135.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.3 mm and length at least 135.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.9 mm (from Z=0.0 to Z=107.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00450", "images": ["images/Shaft_00450.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.0 mm and length at least 120.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.0 mm over length 22.6 mm (from Z=0.0 to Z=84.9).\n9. Finish turn diameter Ø30.0 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01366", "images": ["images/Shaft_01366.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.4 mm and length at least 118.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.0 mm over length 23.3 mm (from Z=0.0 to Z=81.9).\n9. Finish turn diameter Ø30.0 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02622", "images": ["images/Shaft_02622.png", "detail_png/Shaft_02622_length.png", "detail_png/Shaft_02622_diam.png", "detail_png/Shaft_02622_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.5 mm and length at least 112.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.5 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 8.4 mm (from Z=0.0 to Z=73.4).\n9. Finish turn diameter Ø38.2 mm over length 14.0 mm (from Z=0.0 to Z=65.0).\n10. Finish turn diameter Ø31.4 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04361", "images": ["images/Shaft_04361.png", "detail_png/Shaft_04361_length.png", "detail_png/Shaft_04361_diam.png", "detail_png/Shaft_04361_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.0 mm and length at least 141.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.0 mm over length 42.9 mm (from Z=0.0 to Z=42.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.8 mm over length 45.6 mm (from Z=0.0 to Z=93.2).\n9. Finish turn diameter Ø30.0 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01494", "images": ["images/Shaft_01494.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.3 mm and length at least 127.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04414", "images": ["images/Shaft_04414.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 257.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 164.6 mm (from Z=0.0 to Z=164.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.1 mm over length 88.2 mm (from Z=0.0 to Z=88.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00823", "images": ["images/Shaft_00823.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.4 mm and length at least 99.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 89.4 mm (from Z=0.0 to Z=89.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04438", "images": ["images/Shaft_04438.png", "detail_png/Shaft_04438_length.png", "detail_png/Shaft_04438_diam.png", "detail_png/Shaft_04438_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.8 mm and length at least 106.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.8 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00355", "images": ["images/Shaft_00355.png", "detail_png/Shaft_00355_length.png", "detail_png/Shaft_00355_diam.png", "detail_png/Shaft_00355_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 137.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.9 mm over length 5.0 mm (from Z=0.0 to Z=106.5).\n9. Finish turn diameter Ø50.4 mm over length 39.5 mm (from Z=0.0 to Z=101.5).\n10. Finish turn diameter Ø47.2 mm over length 7.5 mm (from Z=0.0 to Z=62.0).\n11. Finish turn diameter Ø39.8 mm over length 27.1 mm (from Z=0.0 to Z=54.5).\n12. Finish turn diameter Ø30.0 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00662", "images": ["images/Shaft_00662.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.3 mm and length at least 275.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.2 mm over length 41.2 mm (from Z=0.0 to Z=195.9).\n10. Finish turn diameter Ø51.6 mm over length 86.3 mm (from Z=0.0 to Z=154.7).\n11. Finish turn diameter Ø42.0 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04319", "images": ["images/Shaft_04319.png", "detail_png/Shaft_04319_length.png", "detail_png/Shaft_04319_diam.png", "detail_png/Shaft_04319_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.8 mm and length at least 163.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.1 mm over length 34.4 mm (from Z=0.0 to Z=122.9).\n9. Finish turn diameter Ø30.0 mm over length 88.5 mm (from Z=0.0 to Z=88.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02395", "images": ["images/Shaft_02395.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.7 mm and length at least 138.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.2 mm over length 40.7 mm (from Z=0.0 to Z=126.6).\n9. Finish turn diameter Ø30.0 mm over length 85.9 mm (from Z=0.0 to Z=85.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03095", "images": ["images/Shaft_03095.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.5 mm and length at least 189.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.2 mm over length 39.8 mm (from Z=0.0 to Z=162.9).\n10. Finish turn diameter Ø34.3 mm over length 19.5 mm (from Z=0.0 to Z=123.1).\n11. Finish turn diameter Ø30.0 mm over length 103.6 mm (from Z=0.0 to Z=103.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03772", "images": ["images/Shaft_03772.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 121.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 82.6 mm (from Z=0.0 to Z=82.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.5 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04787", "images": ["images/Shaft_04787.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.0 mm and length at least 294.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.6 mm over length 43.0 mm (from Z=0.0 to Z=258.7).\n10. Finish turn diameter Ø30.0 mm over length 215.7 mm (from Z=0.0 to Z=215.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01837", "images": ["images/Shaft_01837.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.9 mm and length at least 271.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.5 mm over length 130.7 mm (from Z=0.0 to Z=229.5).\n10. Finish turn diameter Ø30.0 mm over length 98.8 mm (from Z=0.0 to Z=98.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00809", "images": ["images/Shaft_00809.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.5 mm and length at least 181.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 103.8 mm (from Z=0.0 to Z=103.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.3 mm over length 47.9 mm (from Z=0.0 to Z=72.8).\n9. Finish turn diameter Ø30.0 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01109", "images": ["images/Shaft_01109.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.7 mm and length at least 277.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 72.2 mm (from Z=0.0 to Z=72.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.3 mm over length 9.7 mm (from Z=0.0 to Z=200.6).\n10. Finish turn diameter Ø47.4 mm over length 54.9 mm (from Z=0.0 to Z=190.9).\n11. Finish turn diameter Ø30.0 mm over length 136.0 mm (from Z=0.0 to Z=136.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04989", "images": ["images/Shaft_04989.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.6 mm and length at least 134.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 5.1 mm (from Z=0.0 to Z=92.0).\n9. Finish turn diameter Ø30.0 mm over length 86.9 mm (from Z=0.0 to Z=86.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04416", "images": ["images/Shaft_04416.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.8 mm and length at least 286.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 216.2 mm (from Z=0.0 to Z=216.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03585", "images": ["images/Shaft_03585.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.1 mm and length at least 323.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 52.5 mm (from Z=0.0 to Z=52.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.5 mm over length 62.5 mm (from Z=0.0 to Z=265.6).\n10. Finish turn diameter Ø42.6 mm over length 79.0 mm (from Z=0.0 to Z=203.1).\n11. Finish turn diameter Ø33.2 mm over length 85.1 mm (from Z=0.0 to Z=124.1).\n12. Finish turn diameter Ø30.0 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02527", "images": ["images/Shaft_02527.png", "detail_png/Shaft_02527_length.png", "detail_png/Shaft_02527_diam.png", "detail_png/Shaft_02527_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.9 mm and length at least 324.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.9 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 52.0 mm (from Z=0.0 to Z=224.7).\n10. Finish turn diameter Ø44.6 mm over length 172.7 mm (from Z=0.0 to Z=172.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03318", "images": ["images/Shaft_03318.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.6 mm and length at least 89.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.3 mm over length 29.9 mm (from Z=0.0 to Z=76.1).\n9. Finish turn diameter Ø30.0 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01904", "images": ["images/Shaft_01904.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.4 mm and length at least 199.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.0 mm over length 22.0 mm (from Z=0.0 to Z=179.1).\n10. Finish turn diameter Ø30.0 mm over length 157.1 mm (from Z=0.0 to Z=157.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01491", "images": ["images/Shaft_01491.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.5 mm and length at least 212.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.2 mm over length 34.2 mm (from Z=0.0 to Z=175.4).\n10. Finish turn diameter Ø37.5 mm over length 32.1 mm (from Z=0.0 to Z=141.2).\n11. Finish turn diameter Ø31.5 mm over length 36.8 mm (from Z=0.0 to Z=109.1).\n12. Finish turn diameter Ø30.0 mm over length 72.3 mm (from Z=0.0 to Z=72.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04192", "images": ["images/Shaft_04192.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.1 mm and length at least 87.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 30.9 mm (from Z=0.0 to Z=65.0).\n9. Finish turn diameter Ø50.3 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03913", "images": ["images/Shaft_03913.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.6 mm and length at least 237.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.2 mm over length 72.2 mm (from Z=0.0 to Z=202.0).\n10. Finish turn diameter Ø36.8 mm over length 39.2 mm (from Z=0.0 to Z=129.8).\n11. Finish turn diameter Ø30.0 mm over length 90.6 mm (from Z=0.0 to Z=90.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04997", "images": ["images/Shaft_04997.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.6 mm and length at least 268.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 7.4 mm (from Z=0.0 to Z=7.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.0 mm over length 80.3 mm (from Z=0.0 to Z=255.8).\n10. Finish turn diameter Ø30.0 mm over length 175.5 mm (from Z=0.0 to Z=175.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02126", "images": ["images/Shaft_02126.png", "detail_png/Shaft_02126_length.png", "detail_png/Shaft_02126_diam.png", "detail_png/Shaft_02126_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.7 mm and length at least 114.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.5 mm over length 42.1 mm (from Z=0.0 to Z=80.0).\n9. Finish turn diameter Ø35.2 mm over length 22.9 mm (from Z=0.0 to Z=37.9).\n10. Finish turn diameter Ø30.0 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00197", "images": ["images/Shaft_00197.png", "detail_png/Shaft_00197_length.png", "detail_png/Shaft_00197_diam.png", "detail_png/Shaft_00197_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.4 mm and length at least 127.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.4 mm over length 26.6 mm (from Z=0.0 to Z=117.0).\n9. Finish turn diameter Ø33.9 mm over length 24.8 mm (from Z=0.0 to Z=90.4).\n10. Finish turn diameter Ø30.0 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02273", "images": ["images/Shaft_02273.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.3 mm and length at least 85.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.3 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.5 mm over length 8.7 mm (from Z=0.0 to Z=60.7).\n9. Finish turn diameter Ø30.0 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04914", "images": ["images/Shaft_04914.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 148.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.1 mm over length 83.1 mm (from Z=0.0 to Z=83.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03402", "images": ["images/Shaft_03402.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.0 mm and length at least 69.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 15.0 mm (from Z=0.0 to Z=43.8).\n9. Finish turn diameter Ø31.5 mm over length 8.9 mm (from Z=0.0 to Z=28.8).\n10. Finish turn diameter Ø30.0 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00690", "images": ["images/Shaft_00690.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.2 mm and length at least 173.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 128.5 mm (from Z=0.0 to Z=128.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00029", "images": ["images/Shaft_00029.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.0 mm and length at least 256.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 115.6 mm (from Z=0.0 to Z=214.8).\n10. Finish turn diameter Ø36.6 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01916", "images": ["images/Shaft_01916.png", "detail_png/Shaft_01916_length.png", "detail_png/Shaft_01916_diam.png", "detail_png/Shaft_01916_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 212.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 135.5 mm (from Z=0.0 to Z=135.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.5 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02092", "images": ["images/Shaft_02092.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.2 mm and length at least 177.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 131.9 mm (from Z=0.0 to Z=131.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02385", "images": ["images/Shaft_02385.png", "detail_png/Shaft_02385_length.png", "detail_png/Shaft_02385_diam.png", "detail_png/Shaft_02385_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.9 mm and length at least 254.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.2 mm over length 18.8 mm (from Z=0.0 to Z=220.9).\n10. Finish turn diameter Ø30.0 mm over length 202.1 mm (from Z=0.0 to Z=202.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03397", "images": ["images/Shaft_03397.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 102.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 64.7 mm (from Z=0.0 to Z=64.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.5 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03278", "images": ["images/Shaft_03278.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 228.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 183.9 mm (from Z=0.0 to Z=183.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.4 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01902", "images": ["images/Shaft_01902.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.6 mm and length at least 316.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 82.6 mm (from Z=0.0 to Z=82.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.5 mm over length 96.2 mm (from Z=0.0 to Z=228.6).\n10. Finish turn diameter Ø42.8 mm over length 132.4 mm (from Z=0.0 to Z=132.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04643", "images": ["images/Shaft_04643.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.0 mm and length at least 235.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 41.1 mm (from Z=0.0 to Z=173.7).\n10. Finish turn diameter Ø38.4 mm over length 49.0 mm (from Z=0.0 to Z=132.6).\n11. Finish turn diameter Ø30.0 mm over length 83.6 mm (from Z=0.0 to Z=83.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01925", "images": ["images/Shaft_01925.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.7 mm and length at least 209.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.3 mm over length 22.2 mm (from Z=0.0 to Z=163.9).\n10. Finish turn diameter Ø39.9 mm over length 53.5 mm (from Z=0.0 to Z=141.7).\n11. Finish turn diameter Ø30.0 mm over length 88.2 mm (from Z=0.0 to Z=88.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01364", "images": ["images/Shaft_01364.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.3 mm and length at least 286.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 72.7 mm (from Z=0.0 to Z=72.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 208.6 mm (from Z=0.0 to Z=208.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04297", "images": ["images/Shaft_04297.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.9 mm and length at least 92.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 9.8 mm (from Z=0.0 to Z=65.8).\n9. Finish turn diameter Ø43.8 mm over length 28.5 mm (from Z=0.0 to Z=56.0).\n10. Finish turn diameter Ø37.2 mm over length 9.6 mm (from Z=0.0 to Z=27.5).\n11. Finish turn diameter Ø30.0 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00099", "images": ["images/Shaft_00099.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.9 mm and length at least 159.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 27.2 mm (from Z=0.0 to Z=116.8).\n9. Finish turn diameter Ø30.0 mm over length 89.6 mm (from Z=0.0 to Z=89.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00009", "images": ["images/Shaft_00009.png", "detail_png/Shaft_00009_length.png", "detail_png/Shaft_00009_diam.png", "detail_png/Shaft_00009_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.8 mm and length at least 257.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.3 mm over length 75.0 mm (from Z=0.0 to Z=216.8).\n10. Finish turn diameter Ø47.7 mm over length 57.3 mm (from Z=0.0 to Z=141.8).\n11. Finish turn diameter Ø32.2 mm over length 84.5 mm (from Z=0.0 to Z=84.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04061", "images": ["images/Shaft_04061.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.1 mm and length at least 142.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.0 mm (from Z=0.0 to Z=69.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00107", "images": ["images/Shaft_00107.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 309.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 273.3 mm (from Z=0.0 to Z=273.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.4 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03922", "images": ["images/Shaft_03922.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.2 mm and length at least 316.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 96.2 mm (from Z=0.0 to Z=96.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.4 mm over length 40.9 mm (from Z=0.0 to Z=214.8).\n10. Finish turn diameter Ø36.8 mm over length 20.6 mm (from Z=0.0 to Z=173.9).\n11. Finish turn diameter Ø32.6 mm over length 54.1 mm (from Z=0.0 to Z=153.3).\n12. Finish turn diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02848", "images": ["images/Shaft_02848.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.7 mm and length at least 260.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.7 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 202.9 mm (from Z=0.0 to Z=202.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03925", "images": ["images/Shaft_03925.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.6 mm and length at least 68.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04198", "images": ["images/Shaft_04198.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.1 mm and length at least 97.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 8.9 mm (from Z=0.0 to Z=87.4).\n9. Finish turn diameter Ø56.4 mm over length 22.0 mm (from Z=0.0 to Z=78.5).\n10. Finish turn diameter Ø36.8 mm over length 11.4 mm (from Z=0.0 to Z=56.5).\n11. Finish turn diameter Ø30.0 mm over length 45.1 mm (from Z=0.0 to Z=45.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02088", "images": ["images/Shaft_02088.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.5 mm and length at least 98.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04513", "images": ["images/Shaft_04513.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.8 mm and length at least 253.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.8 mm over length 81.7 mm (from Z=0.0 to Z=81.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.6 mm (from Z=0.0 to Z=166.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01868", "images": ["images/Shaft_01868.png", "detail_png/Shaft_01868_length.png", "detail_png/Shaft_01868_diam.png", "detail_png/Shaft_01868_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.2 mm and length at least 152.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.2 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 43.3 mm (from Z=0.0 to Z=127.5).\n9. Finish turn diameter Ø36.4 mm over length 25.8 mm (from Z=0.0 to Z=84.2).\n10. Finish turn diameter Ø30.0 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03440", "images": ["images/Shaft_03440.png", "detail_png/Shaft_03440_length.png", "detail_png/Shaft_03440_diam.png", "detail_png/Shaft_03440_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.2 mm and length at least 266.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.3 mm over length 67.9 mm (from Z=0.0 to Z=171.5).\n10. Finish turn diameter Ø46.4 mm over length 33.1 mm (from Z=0.0 to Z=103.6).\n11. Finish turn diameter Ø40.4 mm over length 70.5 mm (from Z=0.0 to Z=70.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01644", "images": ["images/Shaft_01644.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.8 mm and length at least 112.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.7 mm over length 6.0 mm (from Z=0.0 to Z=91.8).\n9. Finish turn diameter Ø39.9 mm over length 18.5 mm (from Z=0.0 to Z=85.8).\n10. Finish turn diameter Ø30.0 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00070", "images": ["images/Shaft_00070.png", "detail_png/Shaft_00070_length.png", "detail_png/Shaft_00070_diam.png", "detail_png/Shaft_00070_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.4 mm and length at least 111.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.0 mm (from Z=0.0 to Z=75.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00443", "images": ["images/Shaft_00443.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.0 mm and length at least 270.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.0 mm over length 58.1 mm (from Z=0.0 to Z=58.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 28.9 mm (from Z=0.0 to Z=207.2).\n10. Finish turn diameter Ø56.3 mm over length 48.6 mm (from Z=0.0 to Z=178.3).\n11. Finish turn diameter Ø38.3 mm over length 40.6 mm (from Z=0.0 to Z=129.7).\n12. Finish turn diameter Ø30.0 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02941", "images": ["images/Shaft_02941.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 98.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.8 mm over length 40.5 mm (from Z=0.0 to Z=40.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03423", "images": ["images/Shaft_03423.png", "detail_png/Shaft_03423_length.png", "detail_png/Shaft_03423_diam.png", "detail_png/Shaft_03423_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.4 mm and length at least 181.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.8 mm over length 57.7 mm (from Z=0.0 to Z=119.1).\n9. Finish turn diameter Ø43.2 mm over length 28.9 mm (from Z=0.0 to Z=61.4).\n10. Finish turn diameter Ø33.8 mm over length 7.0 mm (from Z=0.0 to Z=32.5).\n11. Finish turn diameter Ø30.0 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03933", "images": ["images/Shaft_03933.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 194.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 109.9 mm (from Z=0.0 to Z=109.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.3 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03249", "images": ["images/Shaft_03249.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.8 mm and length at least 75.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.3 mm over length 8.9 mm (from Z=0.0 to Z=59.6).\n9. Finish turn diameter Ø30.0 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01543", "images": ["images/Shaft_01543.png", "detail_png/Shaft_01543_length.png", "detail_png/Shaft_01543_diam.png", "detail_png/Shaft_01543_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.8 mm and length at least 219.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.5 mm over length 23.4 mm (from Z=0.0 to Z=166.6).\n10. Finish turn diameter Ø43.4 mm over length 58.5 mm (from Z=0.0 to Z=143.2).\n11. Finish turn diameter Ø33.6 mm over length 30.1 mm (from Z=0.0 to Z=84.7).\n12. Finish turn diameter Ø30.0 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02714", "images": ["images/Shaft_02714.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.0 mm and length at least 152.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 12.2 mm (from Z=0.0 to Z=102.5).\n9. Finish turn diameter Ø31.0 mm over length 14.6 mm (from Z=0.0 to Z=90.3).\n10. Finish turn diameter Ø30.0 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00158", "images": ["images/Shaft_00158.png", "detail_png/Shaft_00158_length.png", "detail_png/Shaft_00158_diam.png", "detail_png/Shaft_00158_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.0 mm and length at least 324.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 238.4 mm (from Z=0.0 to Z=238.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00344", "images": ["images/Shaft_00344.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.0 mm and length at least 102.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.5 mm over length 41.8 mm (from Z=0.0 to Z=72.6).\n9. Finish turn diameter Ø56.7 mm over length 13.2 mm (from Z=0.0 to Z=30.8).\n10. Finish turn diameter Ø51.5 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01495", "images": ["images/Shaft_01495.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.5 mm and length at least 195.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.3 mm over length 28.4 mm (from Z=0.0 to Z=133.8).\n10. Finish turn diameter Ø49.9 mm over length 68.1 mm (from Z=0.0 to Z=105.4).\n11. Finish turn diameter Ø42.8 mm over length 18.6 mm (from Z=0.0 to Z=37.3).\n12. Finish turn diameter Ø30.0 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04717", "images": ["images/Shaft_04717.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.8 mm and length at least 214.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 167.7 mm (from Z=0.0 to Z=167.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02310", "images": ["images/Shaft_02310.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.8 mm and length at least 219.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 9.8 mm (from Z=0.0 to Z=9.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.6 mm (from Z=0.0 to Z=204.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01629", "images": ["images/Shaft_01629.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.4 mm and length at least 234.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.2 mm over length 35.3 mm (from Z=0.0 to Z=207.7).\n10. Finish turn diameter Ø30.0 mm over length 172.4 mm (from Z=0.0 to Z=172.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02218", "images": ["images/Shaft_02218.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 264.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.8 mm (from Z=0.0 to Z=221.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 37.2 mm (from Z=0.0 to Z=37.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00205", "images": ["images/Shaft_00205.png", "detail_png/Shaft_00205_length.png", "detail_png/Shaft_00205_diam.png", "detail_png/Shaft_00205_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.0 mm and length at least 309.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 81.6 mm (from Z=0.0 to Z=278.0).\n10. Finish turn diameter Ø34.4 mm over length 66.0 mm (from Z=0.0 to Z=196.4).\n11. Finish turn diameter Ø30.0 mm over length 130.4 mm (from Z=0.0 to Z=130.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04713", "images": ["images/Shaft_04713.png", "detail_png/Shaft_04713_length.png", "detail_png/Shaft_04713_diam.png", "detail_png/Shaft_04713_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.7 mm and length at least 196.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.3 mm over length 12.5 mm (from Z=0.0 to Z=144.4).\n10. Finish turn diameter Ø44.8 mm over length 56.4 mm (from Z=0.0 to Z=131.9).\n11. Finish turn diameter Ø30.0 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00036", "images": ["images/Shaft_00036.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.1 mm and length at least 209.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.6 mm over length 111.6 mm (from Z=0.0 to Z=156.7).\n10. Finish turn diameter Ø52.5 mm over length 45.1 mm (from Z=0.0 to Z=45.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03793", "images": ["images/Shaft_03793.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.0 mm and length at least 199.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.6 mm over length 37.9 mm (from Z=0.0 to Z=153.5).\n10. Finish turn diameter Ø30.0 mm over length 115.6 mm (from Z=0.0 to Z=115.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00330", "images": ["images/Shaft_00330.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.9 mm and length at least 311.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 236.2 mm (from Z=0.0 to Z=236.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03861", "images": ["images/Shaft_03861.png", "detail_png/Shaft_03861_length.png", "detail_png/Shaft_03861_diam.png", "detail_png/Shaft_03861_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.8 mm and length at least 244.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.0 mm over length 42.3 mm (from Z=0.0 to Z=193.2).\n10. Finish turn diameter Ø30.0 mm over length 150.9 mm (from Z=0.0 to Z=150.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02906", "images": ["images/Shaft_02906.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.0 mm and length at least 98.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.4 mm over length 64.1 mm (from Z=0.0 to Z=78.7).\n9. Finish turn diameter Ø33.2 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00287", "images": ["images/Shaft_00287.png", "detail_png/Shaft_00287_length.png", "detail_png/Shaft_00287_diam.png", "detail_png/Shaft_00287_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.1 mm and length at least 215.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 172.4 mm (from Z=0.0 to Z=172.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00896", "images": ["images/Shaft_00896.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.5 mm and length at least 227.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.9 mm over length 86.7 mm (from Z=0.0 to Z=134.1).\n10. Finish turn diameter Ø57.9 mm over length 35.6 mm (from Z=0.0 to Z=47.4).\n11. Finish turn diameter Ø46.2 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00496", "images": ["images/Shaft_00496.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.4 mm and length at least 236.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 207.5 mm (from Z=0.0 to Z=207.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01123", "images": ["images/Shaft_01123.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.2 mm and length at least 148.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.2 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.4 mm over length 63.9 mm (from Z=0.0 to Z=123.4).\n9. Finish turn diameter Ø39.2 mm over length 59.5 mm (from Z=0.0 to Z=59.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00169", "images": ["images/Shaft_00169.png", "detail_png/Shaft_00169_length.png", "detail_png/Shaft_00169_diam.png", "detail_png/Shaft_00169_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.9 mm and length at least 74.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 9.7 mm (from Z=0.0 to Z=9.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.6 mm over length 7.1 mm (from Z=0.0 to Z=60.0).\n9. Finish turn diameter Ø30.3 mm over length 8.9 mm (from Z=0.0 to Z=52.9).\n10. Finish turn diameter Ø30.0 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00139", "images": ["images/Shaft_00139.png", "detail_png/Shaft_00139_length.png", "detail_png/Shaft_00139_diam.png", "detail_png/Shaft_00139_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.3 mm and length at least 95.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.7 mm over length 21.5 mm (from Z=0.0 to Z=57.5).\n9. Finish turn diameter Ø30.0 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03896", "images": ["images/Shaft_03896.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.1 mm and length at least 93.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.4 mm over length 43.6 mm (from Z=0.0 to Z=56.3).\n9. Finish turn diameter Ø36.3 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04426", "images": ["images/Shaft_04426.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 309.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 140.2 mm (from Z=0.0 to Z=140.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.9 mm over length 164.1 mm (from Z=0.0 to Z=164.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01599", "images": ["images/Shaft_01599.png", "detail_png/Shaft_01599_length.png", "detail_png/Shaft_01599_diam.png", "detail_png/Shaft_01599_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.3 mm and length at least 233.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.4 mm over length 82.2 mm (from Z=0.0 to Z=180.5).\n10. Finish turn diameter Ø53.1 mm over length 53.7 mm (from Z=0.0 to Z=98.3).\n11. Finish turn diameter Ø43.3 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01391", "images": ["images/Shaft_01391.png", "detail_png/Shaft_01391_length.png", "detail_png/Shaft_01391_diam.png", "detail_png/Shaft_01391_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.6 mm and length at least 290.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 53.5 mm (from Z=0.0 to Z=53.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.7 mm over length 78.0 mm (from Z=0.0 to Z=232.0).\n10. Finish turn diameter Ø30.7 mm over length 154.0 mm (from Z=0.0 to Z=154.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03427", "images": ["images/Shaft_03427.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.4 mm and length at least 150.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 127.6 mm (from Z=0.0 to Z=127.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00234", "images": ["images/Shaft_00234.png", "detail_png/Shaft_00234_length.png", "detail_png/Shaft_00234_diam.png", "detail_png/Shaft_00234_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.0 mm and length at least 174.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 144.6 mm (from Z=0.0 to Z=144.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03639", "images": ["images/Shaft_03639.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.5 mm and length at least 74.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.0 mm over length 18.2 mm (from Z=0.0 to Z=64.7).\n9. Finish turn diameter Ø38.9 mm over length 10.7 mm (from Z=0.0 to Z=46.5).\n10. Finish turn diameter Ø32.6 mm over length 13.7 mm (from Z=0.0 to Z=35.8).\n11. Finish turn diameter Ø30.0 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02232", "images": ["images/Shaft_02232.png", "detail_png/Shaft_02232_length.png", "detail_png/Shaft_02232_diam.png", "detail_png/Shaft_02232_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.6 mm and length at least 261.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 160.5 mm (from Z=0.0 to Z=160.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.9 mm over length 39.2 mm (from Z=0.0 to Z=95.7).\n10. Finish turn diameter Ø59.9 mm over length 18.1 mm (from Z=0.0 to Z=56.5).\n11. Finish turn diameter Ø53.2 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02202", "images": ["images/Shaft_02202.png", "detail_png/Shaft_02202_length.png", "detail_png/Shaft_02202_diam.png", "detail_png/Shaft_02202_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.4 mm and length at least 81.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02952", "images": ["images/Shaft_02952.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 106.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 83.8 mm (from Z=0.0 to Z=83.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.0 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02968", "images": ["images/Shaft_02968.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.9 mm and length at least 104.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.6 mm (from Z=0.0 to Z=88.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04924", "images": ["images/Shaft_04924.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.7 mm and length at least 170.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.5 mm over length 27.6 mm (from Z=0.0 to Z=103.9).\n9. Finish turn diameter Ø34.3 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04855", "images": ["images/Shaft_04855.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.1 mm and length at least 144.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.1 mm over length 36.7 mm (from Z=0.0 to Z=97.6).\n9. Finish turn diameter Ø30.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04904", "images": ["images/Shaft_04904.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.4 mm and length at least 106.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.4 mm over length 19.2 mm (from Z=0.0 to Z=89.2).\n9. Finish turn diameter Ø30.0 mm over length 70.0 mm (from Z=0.0 to Z=70.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03435", "images": ["images/Shaft_03435.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.4 mm and length at least 249.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 207.0 mm (from Z=0.0 to Z=207.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01893", "images": ["images/Shaft_01893.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.6 mm and length at least 141.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.3 mm over length 27.6 mm (from Z=0.0 to Z=86.6).\n9. Finish turn diameter Ø32.6 mm over length 21.1 mm (from Z=0.0 to Z=59.0).\n10. Finish turn diameter Ø30.0 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02386", "images": ["images/Shaft_02386.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.6 mm and length at least 315.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.9 mm over length 75.9 mm (from Z=0.0 to Z=267.5).\n10. Finish turn diameter Ø30.0 mm over length 191.6 mm (from Z=0.0 to Z=191.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00946", "images": ["images/Shaft_00946.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.5 mm and length at least 319.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 286.7 mm (from Z=0.0 to Z=286.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04540", "images": ["images/Shaft_04540.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.4 mm and length at least 286.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 82.1 mm (from Z=0.0 to Z=253.8).\n10. Finish turn diameter Ø40.8 mm over length 122.0 mm (from Z=0.0 to Z=171.7).\n11. Finish turn diameter Ø30.7 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03058", "images": ["images/Shaft_03058.png", "detail_png/Shaft_03058_length.png", "detail_png/Shaft_03058_diam.png", "detail_png/Shaft_03058_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 120.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.7 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03889", "images": ["images/Shaft_03889.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.1 mm and length at least 165.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.1 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.9 mm over length 26.0 mm (from Z=0.0 to Z=116.5).\n9. Finish turn diameter Ø49.8 mm over length 49.8 mm (from Z=0.0 to Z=90.5).\n10. Finish turn diameter Ø36.2 mm over length 17.9 mm (from Z=0.0 to Z=40.7).\n11. Finish turn diameter Ø30.0 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01979", "images": ["images/Shaft_01979.png", "detail_png/Shaft_01979_length.png", "detail_png/Shaft_01979_diam.png", "detail_png/Shaft_01979_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.1 mm and length at least 251.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 211.1 mm (from Z=0.0 to Z=211.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00337", "images": ["images/Shaft_00337.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.8 mm and length at least 261.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 198.2 mm (from Z=0.0 to Z=198.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01550", "images": ["images/Shaft_01550.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.6 mm and length at least 123.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.9 mm over length 16.5 mm (from Z=0.0 to Z=88.9).\n9. Finish turn diameter Ø30.0 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00839", "images": ["images/Shaft_00839.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.9 mm and length at least 222.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 72.7 mm (from Z=0.0 to Z=72.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 144.4 mm (from Z=0.0 to Z=144.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02029", "images": ["images/Shaft_02029.png", "detail_png/Shaft_02029_length.png", "detail_png/Shaft_02029_diam.png", "detail_png/Shaft_02029_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.5 mm and length at least 174.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.3 mm over length 22.2 mm (from Z=0.0 to Z=122.0).\n9. Finish turn diameter Ø50.5 mm over length 16.5 mm (from Z=0.0 to Z=99.8).\n10. Finish turn diameter Ø38.8 mm over length 13.2 mm (from Z=0.0 to Z=83.3).\n11. Finish turn diameter Ø30.0 mm over length 70.1 mm (from Z=0.0 to Z=70.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01033", "images": ["images/Shaft_01033.png", "detail_png/Shaft_01033_length.png", "detail_png/Shaft_01033_diam.png", "detail_png/Shaft_01033_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.0 mm and length at least 77.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.1 mm over length 10.9 mm (from Z=0.0 to Z=59.3).\n9. Finish turn diameter Ø56.1 mm over length 8.4 mm (from Z=0.0 to Z=48.4).\n10. Finish turn diameter Ø40.4 mm over length 17.9 mm (from Z=0.0 to Z=40.0).\n11. Finish turn diameter Ø30.0 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00215", "images": ["images/Shaft_00215.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.7 mm and length at least 315.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.6 mm over length 41.3 mm (from Z=0.0 to Z=221.6).\n10. Finish turn diameter Ø58.1 mm over length 87.7 mm (from Z=0.0 to Z=180.3).\n11. Finish turn diameter Ø39.5 mm over length 92.6 mm (from Z=0.0 to Z=92.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04810", "images": ["images/Shaft_04810.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.9 mm and length at least 311.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 126.3 mm (from Z=0.0 to Z=126.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.1 mm over length 45.6 mm (from Z=0.0 to Z=179.8).\n10. Finish turn diameter Ø44.9 mm over length 134.2 mm (from Z=0.0 to Z=134.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02621", "images": ["images/Shaft_02621.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.7 mm and length at least 220.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.7 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.4 mm over length 33.5 mm (from Z=0.0 to Z=166.0).\n10. Finish turn diameter Ø30.9 mm over length 37.2 mm (from Z=0.0 to Z=132.5).\n11. Finish turn diameter Ø30.0 mm over length 95.3 mm (from Z=0.0 to Z=95.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02143", "images": ["images/Shaft_02143.png", "detail_png/Shaft_02143_length.png", "detail_png/Shaft_02143_diam.png", "detail_png/Shaft_02143_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.5 mm and length at least 300.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 78.7 mm (from Z=0.0 to Z=78.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.0 mm over length 35.5 mm (from Z=0.0 to Z=217.0).\n10. Finish turn diameter Ø30.2 mm over length 43.6 mm (from Z=0.0 to Z=181.5).\n11. Finish turn diameter Ø30.0 mm over length 137.9 mm (from Z=0.0 to Z=137.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01415", "images": ["images/Shaft_01415.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.6 mm and length at least 164.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.6 mm over length 58.5 mm (from Z=0.0 to Z=141.1).\n9. Finish turn diameter Ø47.1 mm over length 35.1 mm (from Z=0.0 to Z=82.6).\n10. Finish turn diameter Ø40.7 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04687", "images": ["images/Shaft_04687.png", "detail_png/Shaft_04687_length.png", "detail_png/Shaft_04687_diam.png", "detail_png/Shaft_04687_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.5 mm and length at least 245.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.5 mm over length 80.7 mm (from Z=0.0 to Z=80.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 106.4 mm (from Z=0.0 to Z=159.8).\n10. Finish turn diameter Ø32.6 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01010", "images": ["images/Shaft_01010.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.1 mm and length at least 154.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.8 mm over length 23.3 mm (from Z=0.0 to Z=116.7).\n10. Finish turn diameter Ø30.0 mm over length 93.4 mm (from Z=0.0 to Z=93.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00444", "images": ["images/Shaft_00444.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 274.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 172.4 mm (from Z=0.0 to Z=172.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.6 mm over length 97.0 mm (from Z=0.0 to Z=97.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00136", "images": ["images/Shaft_00136.png", "detail_png/Shaft_00136_length.png", "detail_png/Shaft_00136_diam.png", "detail_png/Shaft_00136_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 70.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.0 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04653", "images": ["images/Shaft_04653.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.2 mm and length at least 287.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 121.0 mm (from Z=0.0 to Z=121.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.2 mm over length 72.4 mm (from Z=0.0 to Z=161.7).\n10. Finish turn diameter Ø30.0 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01449", "images": ["images/Shaft_01449.png", "detail_png/Shaft_01449_length.png", "detail_png/Shaft_01449_diam.png", "detail_png/Shaft_01449_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.8 mm and length at least 236.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 55.2 mm (from Z=0.0 to Z=175.4).\n10. Finish turn diameter Ø30.0 mm over length 120.2 mm (from Z=0.0 to Z=120.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01286", "images": ["images/Shaft_01286.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.9 mm and length at least 159.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.9 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.0 mm over length 13.9 mm (from Z=0.0 to Z=119.6).\n9. Finish turn diameter Ø39.8 mm over length 26.4 mm (from Z=0.0 to Z=105.7).\n10. Finish turn diameter Ø33.7 mm over length 50.6 mm (from Z=0.0 to Z=79.3).\n11. Finish turn diameter Ø30.0 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04013", "images": ["images/Shaft_04013.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 99.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.4 mm over length 38.9 mm (from Z=0.0 to Z=38.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00323", "images": ["images/Shaft_00323.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.3 mm and length at least 205.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 97.8 mm (from Z=0.0 to Z=97.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.9 mm over length 70.6 mm (from Z=0.0 to Z=102.9).\n10. Finish turn diameter Ø45.0 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00490", "images": ["images/Shaft_00490.png", "detail_png/Shaft_00490_length.png", "detail_png/Shaft_00490_diam.png", "detail_png/Shaft_00490_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 233.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 196.6 mm (from Z=0.0 to Z=196.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.4 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03529", "images": ["images/Shaft_03529.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.2 mm and length at least 86.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.2 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.1 mm over length 63.4 mm (from Z=0.0 to Z=70.6).\n9. Finish turn diameter Ø45.4 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04527", "images": ["images/Shaft_04527.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 143.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 123.7 mm (from Z=0.0 to Z=123.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.4 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04531", "images": ["images/Shaft_04531.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 201.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 153.6 mm (from Z=0.0 to Z=153.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.3 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02776", "images": ["images/Shaft_02776.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.2 mm and length at least 251.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 120.6 mm (from Z=0.0 to Z=120.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.8 mm (from Z=0.0 to Z=125.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04368", "images": ["images/Shaft_04368.png", "detail_png/Shaft_04368_length.png", "detail_png/Shaft_04368_diam.png", "detail_png/Shaft_04368_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.7 mm and length at least 290.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.7 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 213.7 mm (from Z=0.0 to Z=213.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04918", "images": ["images/Shaft_04918.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.6 mm and length at least 114.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.2 mm (from Z=0.0 to Z=95.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04848", "images": ["images/Shaft_04848.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 107.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 102.3 mm (from Z=0.0 to Z=102.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Break all edges (e.g., 2×45° where applicable).\n9. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02633", "images": ["images/Shaft_02633.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.4 mm and length at least 142.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 63.6 mm (from Z=0.0 to Z=63.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.6 mm over length 44.9 mm (from Z=0.0 to Z=73.4).\n9. Finish turn diameter Ø41.1 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02222", "images": ["images/Shaft_02222.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.8 mm and length at least 230.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 153.9 mm (from Z=0.0 to Z=153.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02118", "images": ["images/Shaft_02118.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.5 mm and length at least 226.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 24.4 mm (from Z=0.0 to Z=156.9).\n10. Finish turn diameter Ø30.0 mm over length 132.5 mm (from Z=0.0 to Z=132.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02339", "images": ["images/Shaft_02339.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.8 mm and length at least 135.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 97.5 mm (from Z=0.0 to Z=97.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00850", "images": ["images/Shaft_00850.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 232.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 189.4 mm (from Z=0.0 to Z=189.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03261", "images": ["images/Shaft_03261.png", "detail_png/Shaft_03261_length.png", "detail_png/Shaft_03261_diam.png", "detail_png/Shaft_03261_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.5 mm and length at least 115.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.9 mm (from Z=0.0 to Z=100.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04043", "images": ["images/Shaft_04043.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 192.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.0 mm (from Z=0.0 to Z=141.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.6 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01771", "images": ["images/Shaft_01771.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.0 mm and length at least 72.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.6 mm over length 30.0 mm (from Z=0.0 to Z=58.8).\n9. Finish turn diameter Ø63.8 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00609", "images": ["images/Shaft_00609.png", "detail_png/Shaft_00609_length.png", "detail_png/Shaft_00609_diam.png", "detail_png/Shaft_00609_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.7 mm and length at least 280.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.6 mm over length 92.5 mm (from Z=0.0 to Z=259.3).\n10. Finish turn diameter Ø30.0 mm over length 166.8 mm (from Z=0.0 to Z=166.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03017", "images": ["images/Shaft_03017.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.1 mm and length at least 323.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 67.0 mm (from Z=0.0 to Z=67.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 154.7 mm (from Z=0.0 to Z=251.9).\n10. Finish turn diameter Ø30.0 mm over length 97.2 mm (from Z=0.0 to Z=97.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04412", "images": ["images/Shaft_04412.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.6 mm and length at least 283.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 237.3 mm (from Z=0.0 to Z=237.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02741", "images": ["images/Shaft_02741.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.8 mm and length at least 102.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.5 mm over length 23.5 mm (from Z=0.0 to Z=77.7).\n9. Finish turn diameter Ø38.0 mm over length 6.9 mm (from Z=0.0 to Z=54.2).\n10. Finish turn diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02176", "images": ["images/Shaft_02176.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.8 mm and length at least 141.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.1 mm (from Z=0.0 to Z=100.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02284", "images": ["images/Shaft_02284.png", "detail_png/Shaft_02284_length.png", "detail_png/Shaft_02284_diam.png", "detail_png/Shaft_02284_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 184.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 133.7 mm (from Z=0.0 to Z=133.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03733", "images": ["images/Shaft_03733.png", "detail_png/Shaft_03733_length.png", "detail_png/Shaft_03733_diam.png", "detail_png/Shaft_03733_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.4 mm and length at least 304.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 140.8 mm (from Z=0.0 to Z=140.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 158.4 mm (from Z=0.0 to Z=158.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04617", "images": ["images/Shaft_04617.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.9 mm and length at least 132.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 42.2 mm (from Z=0.0 to Z=42.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.0 mm over length 50.8 mm (from Z=0.0 to Z=84.8).\n9. Finish turn diameter Ø30.0 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00947", "images": ["images/Shaft_00947.png", "detail_png/Shaft_00947_length.png", "detail_png/Shaft_00947_diam.png", "detail_png/Shaft_00947_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.4 mm and length at least 163.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 37.0 mm (from Z=0.0 to Z=134.8).\n10. Finish turn diameter Ø30.0 mm over length 97.8 mm (from Z=0.0 to Z=97.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00942", "images": ["images/Shaft_00942.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.9 mm and length at least 198.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.6 mm over length 38.3 mm (from Z=0.0 to Z=164.2).\n10. Finish turn diameter Ø30.0 mm over length 125.9 mm (from Z=0.0 to Z=125.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04176", "images": ["images/Shaft_04176.png", "detail_png/Shaft_04176_length.png", "detail_png/Shaft_04176_diam.png", "detail_png/Shaft_04176_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.8 mm and length at least 76.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.6 mm (from Z=0.0 to Z=60.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02017", "images": ["images/Shaft_02017.png", "detail_png/Shaft_02017_length.png", "detail_png/Shaft_02017_diam.png", "detail_png/Shaft_02017_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.4 mm and length at least 164.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 137.2 mm (from Z=0.0 to Z=137.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03589", "images": ["images/Shaft_03589.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.3 mm and length at least 208.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 43.0 mm (from Z=0.0 to Z=164.1).\n10. Finish turn diameter Ø30.0 mm over length 121.1 mm (from Z=0.0 to Z=121.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01594", "images": ["images/Shaft_01594.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 276.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 191.9 mm (from Z=0.0 to Z=191.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04275", "images": ["images/Shaft_04275.png", "detail_png/Shaft_04275_length.png", "detail_png/Shaft_04275_diam.png", "detail_png/Shaft_04275_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.7 mm and length at least 211.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.7 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.0 mm over length 46.2 mm (from Z=0.0 to Z=168.0).\n10. Finish turn diameter Ø39.3 mm over length 77.9 mm (from Z=0.0 to Z=121.8).\n11. Finish turn diameter Ø30.0 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04583", "images": ["images/Shaft_04583.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 165.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 123.3 mm (from Z=0.0 to Z=123.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.7 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02501", "images": ["images/Shaft_02501.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.3 mm and length at least 133.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.9 mm (from Z=0.0 to Z=84.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00131", "images": ["images/Shaft_00131.png", "detail_png/Shaft_00131_length.png", "detail_png/Shaft_00131_diam.png", "detail_png/Shaft_00131_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.4 mm and length at least 194.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 8.7 mm (from Z=0.0 to Z=8.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.1 mm over length 11.9 mm (from Z=0.0 to Z=180.5).\n10. Finish turn diameter Ø30.0 mm over length 168.6 mm (from Z=0.0 to Z=168.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00912", "images": ["images/Shaft_00912.png", "detail_png/Shaft_00912_length.png", "detail_png/Shaft_00912_diam.png", "detail_png/Shaft_00912_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 257.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 229.0 mm (from Z=0.0 to Z=229.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.8 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04947", "images": ["images/Shaft_04947.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.3 mm and length at least 185.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.6 mm (from Z=0.0 to Z=168.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00015", "images": ["images/Shaft_00015.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.6 mm and length at least 123.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.5 mm over length 33.3 mm (from Z=0.0 to Z=75.3).\n9. Finish turn diameter Ø34.1 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04171", "images": ["images/Shaft_04171.png", "detail_png/Shaft_04171_length.png", "detail_png/Shaft_04171_diam.png", "detail_png/Shaft_04171_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.4 mm and length at least 211.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.4 mm over length 38.9 mm (from Z=0.0 to Z=38.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.4 mm over length 63.4 mm (from Z=0.0 to Z=167.6).\n10. Finish turn diameter Ø31.3 mm over length 104.2 mm (from Z=0.0 to Z=104.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02556", "images": ["images/Shaft_02556.png", "detail_png/Shaft_02556_length.png", "detail_png/Shaft_02556_diam.png", "detail_png/Shaft_02556_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.8 mm and length at least 69.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 13.5 mm (from Z=0.0 to Z=47.8).\n9. Finish turn diameter Ø30.0 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00939", "images": ["images/Shaft_00939.png", "detail_png/Shaft_00939_length.png", "detail_png/Shaft_00939_diam.png", "detail_png/Shaft_00939_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 75.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø20.1 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03221", "images": ["images/Shaft_03221.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 155.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 121.2 mm (from Z=0.0 to Z=121.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01579", "images": ["images/Shaft_01579.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.5 mm and length at least 226.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 73.2 mm (from Z=0.0 to Z=73.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.3 mm over length 66.9 mm (from Z=0.0 to Z=148.2).\n10. Finish turn diameter Ø35.8 mm over length 9.4 mm (from Z=0.0 to Z=81.3).\n11. Finish turn diameter Ø30.0 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04439", "images": ["images/Shaft_04439.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.6 mm and length at least 321.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 156.7 mm (from Z=0.0 to Z=156.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.9 mm over length 55.8 mm (from Z=0.0 to Z=160.1).\n10. Finish turn diameter Ø49.4 mm over length 104.3 mm (from Z=0.0 to Z=104.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02684", "images": ["images/Shaft_02684.png", "detail_png/Shaft_02684_length.png", "detail_png/Shaft_02684_diam.png", "detail_png/Shaft_02684_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.2 mm and length at least 105.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.3 mm over length 28.5 mm (from Z=0.0 to Z=89.4).\n9. Finish turn diameter Ø30.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04310", "images": ["images/Shaft_04310.png", "detail_png/Shaft_04310_length.png", "detail_png/Shaft_04310_diam.png", "detail_png/Shaft_04310_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.1 mm and length at least 174.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 97.3 mm (from Z=0.0 to Z=97.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 11.7 mm (from Z=0.0 to Z=72.6).\n9. Finish turn diameter Ø34.8 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03231", "images": ["images/Shaft_03231.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.4 mm and length at least 153.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.0 mm over length 61.1 mm (from Z=0.0 to Z=128.3).\n9. Finish turn diameter Ø55.7 mm over length 50.9 mm (from Z=0.0 to Z=67.2).\n10. Finish turn diameter Ø42.6 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00325", "images": ["images/Shaft_00325.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 247.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 152.4 mm (from Z=0.0 to Z=152.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.7 mm over length 90.3 mm (from Z=0.0 to Z=90.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03666", "images": ["images/Shaft_03666.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.1 mm and length at least 196.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.5 mm over length 34.2 mm (from Z=0.0 to Z=144.4).\n10. Finish turn diameter Ø57.9 mm over length 8.3 mm (from Z=0.0 to Z=110.2).\n11. Finish turn diameter Ø50.9 mm over length 25.9 mm (from Z=0.0 to Z=101.9).\n12. Finish turn diameter Ø44.3 mm over length 76.0 mm (from Z=0.0 to Z=76.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01361", "images": ["images/Shaft_01361.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.9 mm and length at least 201.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.6 mm over length 48.4 mm (from Z=0.0 to Z=129.0).\n10. Finish turn diameter Ø62.1 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01548", "images": ["images/Shaft_01548.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.0 mm and length at least 144.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.0 mm over length 33.5 mm (from Z=0.0 to Z=80.6).\n9. Finish turn diameter Ø49.2 mm over length 9.8 mm (from Z=0.0 to Z=47.1).\n10. Finish turn diameter Ø41.5 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00634", "images": ["images/Shaft_00634.png", "detail_png/Shaft_00634_length.png", "detail_png/Shaft_00634_diam.png", "detail_png/Shaft_00634_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.3 mm and length at least 123.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 91.2 mm (from Z=0.0 to Z=91.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02089", "images": ["images/Shaft_02089.png", "detail_png/Shaft_02089_length.png", "detail_png/Shaft_02089_diam.png", "detail_png/Shaft_02089_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.8 mm and length at least 245.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.6 mm over length 15.1 mm (from Z=0.0 to Z=178.3).\n10. Finish turn diameter Ø30.0 mm over length 163.2 mm (from Z=0.0 to Z=163.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00266", "images": ["images/Shaft_00266.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.2 mm and length at least 104.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 25.6 mm (from Z=0.0 to Z=87.8).\n9. Finish turn diameter Ø31.3 mm over length 14.6 mm (from Z=0.0 to Z=62.2).\n10. Finish turn diameter Ø30.0 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04147", "images": ["images/Shaft_04147.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.5 mm and length at least 89.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.8 mm over length 14.0 mm (from Z=0.0 to Z=61.0).\n9. Finish turn diameter Ø34.2 mm over length 5.2 mm (from Z=0.0 to Z=47.0).\n10. Finish turn diameter Ø30.0 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03906", "images": ["images/Shaft_03906.png", "detail_png/Shaft_03906_length.png", "detail_png/Shaft_03906_diam.png", "detail_png/Shaft_03906_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.4 mm and length at least 109.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.1 mm over length 17.4 mm (from Z=0.0 to Z=83.5).\n9. Finish turn diameter Ø31.1 mm over length 19.7 mm (from Z=0.0 to Z=66.1).\n10. Finish turn diameter Ø30.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01754", "images": ["images/Shaft_01754.png", "detail_png/Shaft_01754_length.png", "detail_png/Shaft_01754_diam.png", "detail_png/Shaft_01754_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.3 mm and length at least 95.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.5 mm over length 8.2 mm (from Z=0.0 to Z=67.8).\n9. Finish turn diameter Ø32.2 mm over length 16.4 mm (from Z=0.0 to Z=59.6).\n10. Finish turn diameter Ø30.0 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00979", "images": ["images/Shaft_00979.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.8 mm and length at least 318.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.8 mm over length 105.2 mm (from Z=0.0 to Z=263.1).\n10. Finish turn diameter Ø37.4 mm over length 111.7 mm (from Z=0.0 to Z=157.9).\n11. Finish turn diameter Ø30.0 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00856", "images": ["images/Shaft_00856.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.3 mm and length at least 316.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.4 mm over length 28.4 mm (from Z=0.0 to Z=244.7).\n10. Finish turn diameter Ø30.0 mm over length 216.3 mm (from Z=0.0 to Z=216.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01098", "images": ["images/Shaft_01098.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.2 mm and length at least 254.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 111.5 mm (from Z=0.0 to Z=211.8).\n10. Finish turn diameter Ø48.9 mm over length 30.3 mm (from Z=0.0 to Z=100.3).\n11. Finish turn diameter Ø40.1 mm over length 70.0 mm (from Z=0.0 to Z=70.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00264", "images": ["images/Shaft_00264.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.5 mm and length at least 188.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 127.8 mm (from Z=0.0 to Z=127.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.0 mm over length 39.0 mm (from Z=0.0 to Z=55.5).\n9. Finish turn diameter Ø30.2 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03136", "images": ["images/Shaft_03136.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 121.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 90.6 mm (from Z=0.0 to Z=90.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.5 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02888", "images": ["images/Shaft_02888.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.0 mm and length at least 158.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.0 mm over length 55.9 mm (from Z=0.0 to Z=55.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.8 mm over length 27.8 mm (from Z=0.0 to Z=97.7).\n9. Finish turn diameter Ø54.2 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02797", "images": ["images/Shaft_02797.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.5 mm and length at least 217.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 5.9 mm (from Z=0.0 to Z=198.2).\n10. Finish turn diameter Ø49.0 mm over length 61.6 mm (from Z=0.0 to Z=192.3).\n11. Finish turn diameter Ø34.4 mm over length 30.8 mm (from Z=0.0 to Z=130.7).\n12. Finish turn diameter Ø30.0 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02979", "images": ["images/Shaft_02979.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.0 mm and length at least 314.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.0 mm over length 105.3 mm (from Z=0.0 to Z=105.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.3 mm (from Z=0.0 to Z=204.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02812", "images": ["images/Shaft_02812.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.9 mm and length at least 198.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.5 mm (from Z=0.0 to Z=169.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01745", "images": ["images/Shaft_01745.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.6 mm and length at least 235.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.2 mm over length 84.0 mm (from Z=0.0 to Z=197.8).\n10. Finish turn diameter Ø36.7 mm over length 58.5 mm (from Z=0.0 to Z=113.8).\n11. Finish turn diameter Ø30.0 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00022", "images": ["images/Shaft_00022.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.9 mm and length at least 212.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.9 mm over length 42.9 mm (from Z=0.0 to Z=42.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 42.7 mm (from Z=0.0 to Z=164.4).\n10. Finish turn diameter Ø54.5 mm over length 48.7 mm (from Z=0.0 to Z=121.7).\n11. Finish turn diameter Ø39.1 mm over length 19.2 mm (from Z=0.0 to Z=73.0).\n12. Finish turn diameter Ø30.0 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01957", "images": ["images/Shaft_01957.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 129.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 19.6 mm (from Z=0.0 to Z=91.2).\n9. Finish turn diameter Ø52.6 mm over length 35.0 mm (from Z=0.0 to Z=71.6).\n10. Finish turn diameter Ø43.4 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00754", "images": ["images/Shaft_00754.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 141.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 119.1 mm (from Z=0.0 to Z=119.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.4 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02093", "images": ["images/Shaft_02093.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.1 mm and length at least 98.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.9 mm over length 17.4 mm (from Z=0.0 to Z=72.6).\n9. Finish turn diameter Ø42.1 mm over length 7.9 mm (from Z=0.0 to Z=55.2).\n10. Finish turn diameter Ø34.6 mm over length 26.1 mm (from Z=0.0 to Z=47.3).\n11. Finish turn diameter Ø30.0 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00931", "images": ["images/Shaft_00931.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.1 mm and length at least 284.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 77.4 mm (from Z=0.0 to Z=77.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 202.0 mm (from Z=0.0 to Z=202.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00143", "images": ["images/Shaft_00143.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.7 mm and length at least 294.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.2 mm over length 54.1 mm (from Z=0.0 to Z=256.8).\n10. Finish turn diameter Ø39.8 mm over length 55.9 mm (from Z=0.0 to Z=202.7).\n11. Finish turn diameter Ø30.0 mm over length 146.8 mm (from Z=0.0 to Z=146.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01073", "images": ["images/Shaft_01073.png", "detail_png/Shaft_01073_length.png", "detail_png/Shaft_01073_diam.png", "detail_png/Shaft_01073_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.1 mm and length at least 296.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 48.4 mm (from Z=0.0 to Z=267.2).\n10. Finish turn diameter Ø30.0 mm over length 218.8 mm (from Z=0.0 to Z=218.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01350", "images": ["images/Shaft_01350.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.6 mm and length at least 307.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.1 mm over length 73.2 mm (from Z=0.0 to Z=177.7).\n10. Finish turn diameter Ø51.4 mm over length 57.1 mm (from Z=0.0 to Z=104.5).\n11. Finish turn diameter Ø37.4 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02400", "images": ["images/Shaft_02400.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.2 mm and length at least 131.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 27.8 mm (from Z=0.0 to Z=99.5).\n9. Finish turn diameter Ø42.5 mm over length 30.4 mm (from Z=0.0 to Z=71.7).\n10. Finish turn diameter Ø31.8 mm over length 21.7 mm (from Z=0.0 to Z=41.3).\n11. Finish turn diameter Ø30.0 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01848", "images": ["images/Shaft_01848.png", "detail_png/Shaft_01848_length.png", "detail_png/Shaft_01848_diam.png", "detail_png/Shaft_01848_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.7 mm and length at least 237.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.7 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 29.8 mm (from Z=0.0 to Z=174.9).\n10. Finish turn diameter Ø30.0 mm over length 145.1 mm (from Z=0.0 to Z=145.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00421", "images": ["images/Shaft_00421.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.2 mm and length at least 252.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.1 mm (from Z=0.0 to Z=224.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04314", "images": ["images/Shaft_04314.png", "detail_png/Shaft_04314_length.png", "detail_png/Shaft_04314_diam.png", "detail_png/Shaft_04314_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.1 mm and length at least 273.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.8 mm over length 166.8 mm (from Z=0.0 to Z=249.2).\n10. Finish turn diameter Ø30.0 mm over length 82.4 mm (from Z=0.0 to Z=82.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02055", "images": ["images/Shaft_02055.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.2 mm and length at least 219.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 103.6 mm (from Z=0.0 to Z=103.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.1 mm over length 54.0 mm (from Z=0.0 to Z=110.8).\n10. Finish turn diameter Ø31.9 mm over length 56.8 mm (from Z=0.0 to Z=56.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03101", "images": ["images/Shaft_03101.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 176.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 137.1 mm (from Z=0.0 to Z=137.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02158", "images": ["images/Shaft_02158.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.6 mm and length at least 270.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 66.5 mm (from Z=0.0 to Z=66.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.9 mm over length 60.6 mm (from Z=0.0 to Z=199.1).\n10. Finish turn diameter Ø42.5 mm over length 70.4 mm (from Z=0.0 to Z=138.5).\n11. Finish turn diameter Ø35.3 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00382", "images": ["images/Shaft_00382.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.0 mm and length at least 227.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.7 mm over length 54.1 mm (from Z=0.0 to Z=199.9).\n10. Finish turn diameter Ø30.0 mm over length 145.8 mm (from Z=0.0 to Z=145.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02615", "images": ["images/Shaft_02615.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.7 mm and length at least 223.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 48.9 mm (from Z=0.0 to Z=48.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 58.7 mm (from Z=0.0 to Z=169.3).\n10. Finish turn diameter Ø47.4 mm over length 41.7 mm (from Z=0.0 to Z=110.6).\n11. Finish turn diameter Ø39.3 mm over length 55.2 mm (from Z=0.0 to Z=68.9).\n12. Finish turn diameter Ø30.0 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04180", "images": ["images/Shaft_04180.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.6 mm and length at least 189.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.6 mm over length 38.8 mm (from Z=0.0 to Z=140.0).\n10. Finish turn diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01779", "images": ["images/Shaft_01779.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.7 mm and length at least 244.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.7 mm over length 66.6 mm (from Z=0.0 to Z=207.3).\n10. Finish turn diameter Ø46.6 mm over length 30.1 mm (from Z=0.0 to Z=140.7).\n11. Finish turn diameter Ø38.1 mm over length 15.5 mm (from Z=0.0 to Z=110.6).\n12. Finish turn diameter Ø30.0 mm over length 95.1 mm (from Z=0.0 to Z=95.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04767", "images": ["images/Shaft_04767.png", "detail_png/Shaft_04767_length.png", "detail_png/Shaft_04767_diam.png", "detail_png/Shaft_04767_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.6 mm and length at least 200.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 48.5 mm (from Z=0.0 to Z=145.1).\n10. Finish turn diameter Ø30.0 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04738", "images": ["images/Shaft_04738.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.8 mm and length at least 264.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.8 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.2 mm over length 26.8 mm (from Z=0.0 to Z=241.1).\n10. Finish turn diameter Ø36.6 mm over length 27.4 mm (from Z=0.0 to Z=214.3).\n11. Finish turn diameter Ø30.0 mm over length 186.9 mm (from Z=0.0 to Z=186.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00363", "images": ["images/Shaft_00363.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.0 mm and length at least 150.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.4 mm over length 15.9 mm (from Z=0.0 to Z=109.8).\n10. Finish turn diameter Ø30.0 mm over length 93.9 mm (from Z=0.0 to Z=93.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01132", "images": ["images/Shaft_01132.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.0 mm and length at least 154.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.9 mm over length 37.6 mm (from Z=0.0 to Z=111.7).\n9. Finish turn diameter Ø30.0 mm over length 74.1 mm (from Z=0.0 to Z=74.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01714", "images": ["images/Shaft_01714.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.3 mm and length at least 324.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 175.8 mm (from Z=0.0 to Z=175.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.7 mm over length 53.6 mm (from Z=0.0 to Z=143.4).\n10. Finish turn diameter Ø36.8 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03632", "images": ["images/Shaft_03632.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.1 mm and length at least 220.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.7 mm over length 44.7 mm (from Z=0.0 to Z=176.3).\n10. Finish turn diameter Ø66.9 mm over length 36.3 mm (from Z=0.0 to Z=131.6).\n11. Finish turn diameter Ø54.9 mm over length 25.9 mm (from Z=0.0 to Z=95.3).\n12. Finish turn diameter Ø46.6 mm over length 21.2 mm (from Z=0.0 to Z=69.4).\n13. Finish turn diameter Ø30.6 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02897", "images": ["images/Shaft_02897.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.3 mm and length at least 101.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.2 mm over length 49.8 mm (from Z=0.0 to Z=71.3).\n9. Finish turn diameter Ø39.9 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00190", "images": ["images/Shaft_00190.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.6 mm and length at least 72.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø76.2 mm over length 22.7 mm (from Z=0.0 to Z=62.3).\n9. Finish turn diameter Ø60.6 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00623", "images": ["images/Shaft_00623.png", "detail_png/Shaft_00623_length.png", "detail_png/Shaft_00623_diam.png", "detail_png/Shaft_00623_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.9 mm and length at least 164.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 101.4 mm (from Z=0.0 to Z=101.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02541", "images": ["images/Shaft_02541.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.5 mm and length at least 164.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 145.3 mm (from Z=0.0 to Z=145.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04784", "images": ["images/Shaft_04784.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.9 mm and length at least 165.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.7 mm over length 34.8 mm (from Z=0.0 to Z=124.9).\n9. Finish turn diameter Ø46.5 mm over length 90.1 mm (from Z=0.0 to Z=90.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01166", "images": ["images/Shaft_01166.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.6 mm and length at least 124.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 12.6 mm (from Z=0.0 to Z=12.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.9 mm over length 48.1 mm (from Z=0.0 to Z=106.8).\n9. Finish turn diameter Ø30.0 mm over length 58.7 mm (from Z=0.0 to Z=58.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03545", "images": ["images/Shaft_03545.png", "detail_png/Shaft_03545_length.png", "detail_png/Shaft_03545_diam.png", "detail_png/Shaft_03545_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.2 mm and length at least 318.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 271.5 mm (from Z=0.0 to Z=271.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00222", "images": ["images/Shaft_00222.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.6 mm and length at least 106.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 68.6 mm (from Z=0.0 to Z=68.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00972", "images": ["images/Shaft_00972.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.6 mm and length at least 95.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00385", "images": ["images/Shaft_00385.png", "detail_png/Shaft_00385_length.png", "detail_png/Shaft_00385_diam.png", "detail_png/Shaft_00385_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.7 mm and length at least 209.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.7 mm over length 42.3 mm (from Z=0.0 to Z=173.0).\n10. Finish turn diameter Ø52.8 mm over length 28.2 mm (from Z=0.0 to Z=130.7).\n11. Finish turn diameter Ø37.6 mm over length 49.3 mm (from Z=0.0 to Z=102.5).\n12. Finish turn diameter Ø30.0 mm over length 53.2 mm (from Z=0.0 to Z=53.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00791", "images": ["images/Shaft_00791.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.3 mm and length at least 109.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.1 mm over length 6.5 mm (from Z=0.0 to Z=75.9).\n9. Finish turn diameter Ø48.8 mm over length 15.7 mm (from Z=0.0 to Z=69.4).\n10. Finish turn diameter Ø34.6 mm over length 5.0 mm (from Z=0.0 to Z=53.7).\n11. Finish turn diameter Ø30.0 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01094", "images": ["images/Shaft_01094.png", "detail_png/Shaft_01094_length.png", "detail_png/Shaft_01094_diam.png", "detail_png/Shaft_01094_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.5 mm and length at least 83.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.6 mm over length 20.2 mm (from Z=0.0 to Z=65.2).\n9. Finish turn diameter Ø53.5 mm over length 19.6 mm (from Z=0.0 to Z=45.0).\n10. Finish turn diameter Ø43.2 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02482", "images": ["images/Shaft_02482.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.1 mm and length at least 235.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.1 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.4 mm (from Z=0.0 to Z=170.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02329", "images": ["images/Shaft_02329.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.8 mm and length at least 120.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.8 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.7 mm over length 20.2 mm (from Z=0.0 to Z=73.9).\n9. Finish turn diameter Ø41.1 mm over length 30.8 mm (from Z=0.0 to Z=53.7).\n10. Finish turn diameter Ø32.4 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00418", "images": ["images/Shaft_00418.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.7 mm and length at least 108.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.1 mm over length 30.4 mm (from Z=0.0 to Z=77.2).\n9. Finish turn diameter Ø30.0 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02926", "images": ["images/Shaft_02926.png", "detail_png/Shaft_02926_length.png", "detail_png/Shaft_02926_diam.png", "detail_png/Shaft_02926_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.6 mm and length at least 232.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 61.8 mm (from Z=0.0 to Z=61.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 165.8 mm (from Z=0.0 to Z=165.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04511", "images": ["images/Shaft_04511.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.1 mm and length at least 136.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.5 mm over length 15.3 mm (from Z=0.0 to Z=103.7).\n9. Finish turn diameter Ø36.9 mm over length 28.8 mm (from Z=0.0 to Z=88.4).\n10. Finish turn diameter Ø33.3 mm over length 30.2 mm (from Z=0.0 to Z=59.6).\n11. Finish turn diameter Ø30.0 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03628", "images": ["images/Shaft_03628.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.0 mm and length at least 154.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.9 mm over length 14.4 mm (from Z=0.0 to Z=69.7).\n9. Finish turn diameter Ø37.7 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02350", "images": ["images/Shaft_02350.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.2 mm and length at least 292.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 52.5 mm (from Z=0.0 to Z=52.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 120.4 mm (from Z=0.0 to Z=235.0).\n10. Finish turn diameter Ø30.0 mm over length 114.6 mm (from Z=0.0 to Z=114.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02006", "images": ["images/Shaft_02006.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.3 mm and length at least 281.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.3 mm over length 83.9 mm (from Z=0.0 to Z=83.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø75.2 mm over length 98.1 mm (from Z=0.0 to Z=192.6).\n10. Finish turn diameter Ø68.7 mm over length 24.0 mm (from Z=0.0 to Z=94.5).\n11. Finish turn diameter Ø65.1 mm over length 70.5 mm (from Z=0.0 to Z=70.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03492", "images": ["images/Shaft_03492.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 284.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 223.8 mm (from Z=0.0 to Z=223.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02794", "images": ["images/Shaft_02794.png", "detail_png/Shaft_02794_length.png", "detail_png/Shaft_02794_diam.png", "detail_png/Shaft_02794_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.8 mm and length at least 137.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.9 mm over length 56.2 mm (from Z=0.0 to Z=67.6).\n9. Finish turn diameter Ø30.0 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00676", "images": ["images/Shaft_00676.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.9 mm and length at least 322.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 114.6 mm (from Z=0.0 to Z=114.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.6 mm over length 11.1 mm (from Z=0.0 to Z=203.0).\n10. Finish turn diameter Ø36.0 mm over length 68.3 mm (from Z=0.0 to Z=191.9).\n11. Finish turn diameter Ø30.0 mm over length 123.6 mm (from Z=0.0 to Z=123.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04425", "images": ["images/Shaft_04425.png", "detail_png/Shaft_04425_length.png", "detail_png/Shaft_04425_diam.png", "detail_png/Shaft_04425_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.1 mm and length at least 107.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 5.3 mm (from Z=0.0 to Z=55.4).\n9. Finish turn diameter Ø47.1 mm over length 6.1 mm (from Z=0.0 to Z=50.1).\n10. Finish turn diameter Ø43.1 mm over length 10.7 mm (from Z=0.0 to Z=44.0).\n11. Finish turn diameter Ø40.0 mm over length 24.1 mm (from Z=0.0 to Z=33.3).\n12. Finish turn diameter Ø30.0 mm over length 9.2 mm (from Z=0.0 to Z=9.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04105", "images": ["images/Shaft_04105.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.7 mm and length at least 286.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 54.0 mm (from Z=0.0 to Z=54.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 12.6 mm (from Z=0.0 to Z=227.7).\n10. Finish turn diameter Ø52.8 mm over length 42.5 mm (from Z=0.0 to Z=215.1).\n11. Finish turn diameter Ø44.7 mm over length 118.4 mm (from Z=0.0 to Z=172.6).\n12. Finish turn diameter Ø40.0 mm over length 54.2 mm (from Z=0.0 to Z=54.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04391", "images": ["images/Shaft_04391.png", "detail_png/Shaft_04391_length.png", "detail_png/Shaft_04391_diam.png", "detail_png/Shaft_04391_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.1 mm and length at least 186.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.8 mm over length 32.7 mm (from Z=0.0 to Z=148.0).\n9. Finish turn diameter Ø45.8 mm over length 35.4 mm (from Z=0.0 to Z=115.3).\n10. Finish turn diameter Ø34.8 mm over length 38.6 mm (from Z=0.0 to Z=79.9).\n11. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02364", "images": ["images/Shaft_02364.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.2 mm and length at least 288.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 83.8 mm (from Z=0.0 to Z=83.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 35.1 mm (from Z=0.0 to Z=199.5).\n10. Finish turn diameter Ø30.0 mm over length 164.4 mm (from Z=0.0 to Z=164.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03446", "images": ["images/Shaft_03446.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.5 mm and length at least 88.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03052", "images": ["images/Shaft_03052.png", "detail_png/Shaft_03052_length.png", "detail_png/Shaft_03052_diam.png", "detail_png/Shaft_03052_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.9 mm and length at least 252.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.2 mm over length 117.2 mm (from Z=0.0 to Z=205.9).\n10. Finish turn diameter Ø30.0 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02861", "images": ["images/Shaft_02861.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.4 mm and length at least 118.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 92.0 mm (from Z=0.0 to Z=92.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03775", "images": ["images/Shaft_03775.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.8 mm and length at least 300.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 137.4 mm (from Z=0.0 to Z=137.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 158.0 mm (from Z=0.0 to Z=158.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01101", "images": ["images/Shaft_01101.png", "detail_png/Shaft_01101_length.png", "detail_png/Shaft_01101_diam.png", "detail_png/Shaft_01101_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.6 mm and length at least 177.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 37.0 mm (from Z=0.0 to Z=146.9).\n10. Finish turn diameter Ø30.0 mm over length 109.9 mm (from Z=0.0 to Z=109.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02376", "images": ["images/Shaft_02376.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 301.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 271.4 mm (from Z=0.0 to Z=271.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.1 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02438", "images": ["images/Shaft_02438.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.0 mm and length at least 301.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 76.4 mm (from Z=0.0 to Z=76.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 219.7 mm (from Z=0.0 to Z=219.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04569", "images": ["images/Shaft_04569.png", "detail_png/Shaft_04569_length.png", "detail_png/Shaft_04569_diam.png", "detail_png/Shaft_04569_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.4 mm and length at least 150.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 42.4 mm (from Z=0.0 to Z=109.6).\n9. Finish turn diameter Ø34.7 mm over length 54.0 mm (from Z=0.0 to Z=67.2).\n10. Finish turn diameter Ø30.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02105", "images": ["images/Shaft_02105.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 299.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 255.0 mm (from Z=0.0 to Z=255.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00858", "images": ["images/Shaft_00858.png", "detail_png/Shaft_00858_length.png", "detail_png/Shaft_00858_diam.png", "detail_png/Shaft_00858_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.5 mm and length at least 247.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 18.7 mm (from Z=0.0 to Z=182.9).\n10. Finish turn diameter Ø30.0 mm over length 164.2 mm (from Z=0.0 to Z=164.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00461", "images": ["images/Shaft_00461.png", "detail_png/Shaft_00461_length.png", "detail_png/Shaft_00461_diam.png", "detail_png/Shaft_00461_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.1 mm and length at least 142.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø73.5 mm over length 28.1 mm (from Z=0.0 to Z=77.6).\n9. Finish turn diameter Ø69.8 mm over length 49.5 mm (from Z=0.0 to Z=49.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02693", "images": ["images/Shaft_02693.png", "detail_png/Shaft_02693_length.png", "detail_png/Shaft_02693_diam.png", "detail_png/Shaft_02693_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 107.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.9 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00726", "images": ["images/Shaft_00726.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.8 mm and length at least 74.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 48.9 mm (from Z=0.0 to Z=48.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02753", "images": ["images/Shaft_02753.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.5 mm and length at least 213.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 196.1 mm (from Z=0.0 to Z=196.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01023", "images": ["images/Shaft_01023.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.6 mm and length at least 68.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.4 mm over length 17.6 mm (from Z=0.0 to Z=45.4).\n9. Finish turn diameter Ø30.0 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00019", "images": ["images/Shaft_00019.png", "detail_png/Shaft_00019_length.png", "detail_png/Shaft_00019_diam.png", "detail_png/Shaft_00019_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 126.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.5 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03818", "images": ["images/Shaft_03818.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 210.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 177.4 mm (from Z=0.0 to Z=177.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.6 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02001", "images": ["images/Shaft_02001.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.2 mm and length at least 193.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 23.9 mm (from Z=0.0 to Z=130.5).\n9. Finish turn diameter Ø38.8 mm over length 36.4 mm (from Z=0.0 to Z=106.6).\n10. Finish turn diameter Ø30.0 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04625", "images": ["images/Shaft_04625.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 299.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 225.5 mm (from Z=0.0 to Z=225.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.3 mm over length 68.8 mm (from Z=0.0 to Z=68.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00284", "images": ["images/Shaft_00284.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.5 mm and length at least 108.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 70.6 mm (from Z=0.0 to Z=70.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00767", "images": ["images/Shaft_00767.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.6 mm and length at least 186.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.6 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 129.7 mm (from Z=0.0 to Z=129.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02496", "images": ["images/Shaft_02496.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.9 mm and length at least 129.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.5 mm over length 39.9 mm (from Z=0.0 to Z=119.9).\n9. Finish turn diameter Ø30.0 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01143", "images": ["images/Shaft_01143.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.7 mm and length at least 89.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 27.3 mm (from Z=0.0 to Z=27.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.9 mm over length 26.3 mm (from Z=0.0 to Z=57.6).\n9. Finish turn diameter Ø51.3 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00921", "images": ["images/Shaft_00921.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.9 mm and length at least 110.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 94.6 mm (from Z=0.0 to Z=94.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01889", "images": ["images/Shaft_01889.png", "detail_png/Shaft_01889_length.png", "detail_png/Shaft_01889_diam.png", "detail_png/Shaft_01889_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.2 mm and length at least 191.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.3 mm over length 84.7 mm (from Z=0.0 to Z=165.1).\n9. Finish turn diameter Ø60.5 mm over length 80.4 mm (from Z=0.0 to Z=80.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04719", "images": ["images/Shaft_04719.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.9 mm and length at least 166.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.6 mm over length 74.9 mm (from Z=0.0 to Z=108.3).\n9. Finish turn diameter Ø30.0 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04270", "images": ["images/Shaft_04270.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.6 mm and length at least 253.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.6 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.8 mm over length 89.1 mm (from Z=0.0 to Z=225.9).\n10. Finish turn diameter Ø30.9 mm over length 59.9 mm (from Z=0.0 to Z=136.8).\n11. Finish turn diameter Ø30.0 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04307", "images": ["images/Shaft_04307.png", "detail_png/Shaft_04307_length.png", "detail_png/Shaft_04307_diam.png", "detail_png/Shaft_04307_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.9 mm and length at least 191.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.6 mm (from Z=0.0 to Z=148.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00878", "images": ["images/Shaft_00878.png", "detail_png/Shaft_00878_length.png", "detail_png/Shaft_00878_diam.png", "detail_png/Shaft_00878_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.0 mm and length at least 188.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 160.9 mm (from Z=0.0 to Z=160.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00384", "images": ["images/Shaft_00384.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.3 mm and length at least 245.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.7 mm over length 85.2 mm (from Z=0.0 to Z=212.7).\n10. Finish turn diameter Ø30.0 mm over length 127.5 mm (from Z=0.0 to Z=127.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03410", "images": ["images/Shaft_03410.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.9 mm and length at least 221.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 77.5 mm (from Z=0.0 to Z=77.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.3 mm over length 68.1 mm (from Z=0.0 to Z=138.6).\n10. Finish turn diameter Ø30.4 mm over length 31.6 mm (from Z=0.0 to Z=70.5).\n11. Finish turn diameter Ø30.0 mm over length 38.9 mm (from Z=0.0 to Z=38.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04568", "images": ["images/Shaft_04568.png", "detail_png/Shaft_04568_length.png", "detail_png/Shaft_04568_diam.png", "detail_png/Shaft_04568_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.0 mm and length at least 76.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 7.4 mm (from Z=0.0 to Z=7.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.0 mm over length 21.0 mm (from Z=0.0 to Z=64.4).\n9. Finish turn diameter Ø46.2 mm over length 20.7 mm (from Z=0.0 to Z=43.4).\n10. Finish turn diameter Ø31.1 mm over length 6.9 mm (from Z=0.0 to Z=22.7).\n11. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03158", "images": ["images/Shaft_03158.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.6 mm and length at least 202.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.6 mm over length 23.7 mm (from Z=0.0 to Z=189.3).\n10. Finish turn diameter Ø30.0 mm over length 165.6 mm (from Z=0.0 to Z=165.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00944", "images": ["images/Shaft_00944.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.5 mm and length at least 257.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.2 mm over length 64.5 mm (from Z=0.0 to Z=232.4).\n10. Finish turn diameter Ø52.9 mm over length 26.7 mm (from Z=0.0 to Z=167.9).\n11. Finish turn diameter Ø33.4 mm over length 37.7 mm (from Z=0.0 to Z=141.2).\n12. Finish turn diameter Ø30.0 mm over length 103.5 mm (from Z=0.0 to Z=103.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00959", "images": ["images/Shaft_00959.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.4 mm and length at least 305.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 101.5 mm (from Z=0.0 to Z=101.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 199.0 mm (from Z=0.0 to Z=199.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01131", "images": ["images/Shaft_01131.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.6 mm and length at least 301.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 52.8 mm (from Z=0.0 to Z=52.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.4 mm over length 98.7 mm (from Z=0.0 to Z=243.9).\n10. Finish turn diameter Ø30.0 mm over length 145.2 mm (from Z=0.0 to Z=145.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02437", "images": ["images/Shaft_02437.png", "detail_png/Shaft_02437_length.png", "detail_png/Shaft_02437_diam.png", "detail_png/Shaft_02437_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 223.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.7 mm (from Z=0.0 to Z=167.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03923", "images": ["images/Shaft_03923.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.7 mm and length at least 167.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.0 mm over length 8.6 mm (from Z=0.0 to Z=118.1).\n10. Finish turn diameter Ø30.0 mm over length 109.5 mm (from Z=0.0 to Z=109.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02565", "images": ["images/Shaft_02565.png", "detail_png/Shaft_02565_length.png", "detail_png/Shaft_02565_diam.png", "detail_png/Shaft_02565_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.8 mm and length at least 287.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 63.0 mm (from Z=0.0 to Z=256.7).\n10. Finish turn diameter Ø40.1 mm over length 82.6 mm (from Z=0.0 to Z=193.7).\n11. Finish turn diameter Ø31.3 mm over length 8.8 mm (from Z=0.0 to Z=111.1).\n12. Finish turn diameter Ø30.0 mm over length 102.3 mm (from Z=0.0 to Z=102.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00971", "images": ["images/Shaft_00971.png", "detail_png/Shaft_00971_length.png", "detail_png/Shaft_00971_diam.png", "detail_png/Shaft_00971_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.5 mm and length at least 157.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.0 mm over length 18.3 mm (from Z=0.0 to Z=93.0).\n9. Finish turn diameter Ø35.9 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04269", "images": ["images/Shaft_04269.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 151.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 106.6 mm (from Z=0.0 to Z=106.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.1 mm over length 40.0 mm (from Z=0.0 to Z=40.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02412", "images": ["images/Shaft_02412.png", "detail_png/Shaft_02412_length.png", "detail_png/Shaft_02412_diam.png", "detail_png/Shaft_02412_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.3 mm and length at least 223.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.3 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.5 mm over length 9.0 mm (from Z=0.0 to Z=148.5).\n10. Finish turn diameter Ø58.0 mm over length 55.8 mm (from Z=0.0 to Z=139.5).\n11. Finish turn diameter Ø38.1 mm over length 43.8 mm (from Z=0.0 to Z=83.7).\n12. Finish turn diameter Ø34.1 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00464", "images": ["images/Shaft_00464.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.4 mm and length at least 71.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02426", "images": ["images/Shaft_02426.png", "detail_png/Shaft_02426_length.png", "detail_png/Shaft_02426_diam.png", "detail_png/Shaft_02426_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.0 mm and length at least 128.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.6 mm over length 59.8 mm (from Z=0.0 to Z=68.8).\n9. Finish turn diameter Ø44.7 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00814", "images": ["images/Shaft_00814.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 273.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 190.8 mm (from Z=0.0 to Z=190.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.7 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00305", "images": ["images/Shaft_00305.png", "detail_png/Shaft_00305_length.png", "detail_png/Shaft_00305_diam.png", "detail_png/Shaft_00305_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.9 mm and length at least 281.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 91.5 mm (from Z=0.0 to Z=91.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 184.6 mm (from Z=0.0 to Z=184.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01952", "images": ["images/Shaft_01952.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.5 mm and length at least 82.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.1 mm over length 16.6 mm (from Z=0.0 to Z=56.0).\n9. Finish turn diameter Ø44.1 mm over length 13.2 mm (from Z=0.0 to Z=39.4).\n10. Finish turn diameter Ø30.0 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03548", "images": ["images/Shaft_03548.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.9 mm and length at least 291.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.9 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 102.8 mm (from Z=0.0 to Z=242.4).\n10. Finish turn diameter Ø49.1 mm over length 49.7 mm (from Z=0.0 to Z=139.6).\n11. Finish turn diameter Ø35.3 mm over length 89.9 mm (from Z=0.0 to Z=89.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03099", "images": ["images/Shaft_03099.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.7 mm and length at least 201.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 94.6 mm (from Z=0.0 to Z=94.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.9 mm over length 48.9 mm (from Z=0.0 to Z=101.5).\n10. Finish turn diameter Ø30.0 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00024", "images": ["images/Shaft_00024.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 229.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.8 mm (from Z=0.0 to Z=136.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.2 mm over length 88.1 mm (from Z=0.0 to Z=88.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02321", "images": ["images/Shaft_02321.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.6 mm and length at least 251.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.6 mm over length 69.9 mm (from Z=0.0 to Z=198.6).\n10. Finish turn diameter Ø46.6 mm over length 44.3 mm (from Z=0.0 to Z=128.7).\n11. Finish turn diameter Ø30.0 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03741", "images": ["images/Shaft_03741.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.1 mm and length at least 93.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.0 mm over length 7.3 mm (from Z=0.0 to Z=76.7).\n9. Finish turn diameter Ø30.0 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00830", "images": ["images/Shaft_00830.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.8 mm and length at least 171.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 51.7 mm (from Z=0.0 to Z=51.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.4 mm over length 51.7 mm (from Z=0.0 to Z=115.2).\n9. Finish turn diameter Ø30.0 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04654", "images": ["images/Shaft_04654.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 295.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.2 mm over length 185.5 mm (from Z=0.0 to Z=185.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02502", "images": ["images/Shaft_02502.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.9 mm and length at least 105.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 5.3 mm (from Z=0.0 to Z=5.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.4 mm (from Z=0.0 to Z=95.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00577", "images": ["images/Shaft_00577.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.5 mm and length at least 270.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 129.9 mm (from Z=0.0 to Z=129.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.3 mm over length 76.0 mm (from Z=0.0 to Z=135.1).\n10. Finish turn diameter Ø50.9 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03466", "images": ["images/Shaft_03466.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.8 mm and length at least 282.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 81.5 mm (from Z=0.0 to Z=81.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.9 mm over length 129.3 mm (from Z=0.0 to Z=195.6).\n10. Finish turn diameter Ø36.0 mm over length 27.0 mm (from Z=0.0 to Z=66.3).\n11. Finish turn diameter Ø30.0 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03769", "images": ["images/Shaft_03769.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.2 mm and length at least 251.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.2 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 180.9 mm (from Z=0.0 to Z=180.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00534", "images": ["images/Shaft_00534.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.5 mm and length at least 117.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.4 mm (from Z=0.0 to Z=99.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04666", "images": ["images/Shaft_04666.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.7 mm and length at least 110.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 20.5 mm (from Z=0.0 to Z=91.7).\n9. Finish turn diameter Ø36.2 mm over length 24.5 mm (from Z=0.0 to Z=71.2).\n10. Finish turn diameter Ø30.0 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02875", "images": ["images/Shaft_02875.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 260.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 215.1 mm (from Z=0.0 to Z=215.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 40.5 mm (from Z=0.0 to Z=40.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00282", "images": ["images/Shaft_00282.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.5 mm and length at least 302.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 74.6 mm (from Z=0.0 to Z=74.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.8 mm over length 46.6 mm (from Z=0.0 to Z=223.2).\n10. Finish turn diameter Ø30.0 mm over length 176.6 mm (from Z=0.0 to Z=176.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01237", "images": ["images/Shaft_01237.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.9 mm and length at least 299.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 65.9 mm (from Z=0.0 to Z=65.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.9 mm over length 33.9 mm (from Z=0.0 to Z=228.9).\n10. Finish turn diameter Ø51.9 mm over length 141.7 mm (from Z=0.0 to Z=195.0).\n11. Finish turn diameter Ø32.3 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04591", "images": ["images/Shaft_04591.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.7 mm and length at least 290.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.7 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.8 mm (from Z=0.0 to Z=177.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02883", "images": ["images/Shaft_02883.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.9 mm and length at least 83.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.7 mm over length 15.9 mm (from Z=0.0 to Z=69.5).\n9. Finish turn diameter Ø52.6 mm over length 22.8 mm (from Z=0.0 to Z=53.6).\n10. Finish turn diameter Ø49.4 mm over length 18.4 mm (from Z=0.0 to Z=30.8).\n11. Finish turn diameter Ø34.2 mm over length 7.4 mm (from Z=0.0 to Z=12.4).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00562", "images": ["images/Shaft_00562.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.2 mm and length at least 175.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.6 mm over length 47.9 mm (from Z=0.0 to Z=118.1).\n9. Finish turn diameter Ø62.2 mm over length 8.4 mm (from Z=0.0 to Z=70.2).\n10. Finish turn diameter Ø43.8 mm over length 30.1 mm (from Z=0.0 to Z=61.8).\n11. Finish turn diameter Ø31.4 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02148", "images": ["images/Shaft_02148.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.9 mm and length at least 213.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.9 mm over length 103.2 mm (from Z=0.0 to Z=103.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.3 mm over length 38.4 mm (from Z=0.0 to Z=105.0).\n10. Finish turn diameter Ø44.6 mm over length 66.6 mm (from Z=0.0 to Z=66.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03199", "images": ["images/Shaft_03199.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.2 mm and length at least 194.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.3 mm over length 33.2 mm (from Z=0.0 to Z=157.5).\n9. Finish turn diameter Ø59.1 mm over length 86.1 mm (from Z=0.0 to Z=124.3).\n10. Finish turn diameter Ø43.6 mm over length 22.9 mm (from Z=0.0 to Z=38.2).\n11. Finish turn diameter Ø40.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04991", "images": ["images/Shaft_04991.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.2 mm and length at least 234.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 80.1 mm (from Z=0.0 to Z=80.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.9 mm (from Z=0.0 to Z=148.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02760", "images": ["images/Shaft_02760.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.9 mm and length at least 230.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 96.3 mm (from Z=0.0 to Z=96.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.5 mm over length 54.8 mm (from Z=0.0 to Z=128.9).\n10. Finish turn diameter Ø49.1 mm over length 52.7 mm (from Z=0.0 to Z=74.1).\n11. Finish turn diameter Ø38.7 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03304", "images": ["images/Shaft_03304.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.6 mm and length at least 152.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.0 mm over length 61.1 mm (from Z=0.0 to Z=119.6).\n9. Finish turn diameter Ø30.0 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00402", "images": ["images/Shaft_00402.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.6 mm and length at least 81.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.0 mm over length 11.2 mm (from Z=0.0 to Z=66.4).\n9. Finish turn diameter Ø34.2 mm over length 9.4 mm (from Z=0.0 to Z=55.2).\n10. Finish turn diameter Ø30.1 mm over length 19.8 mm (from Z=0.0 to Z=45.8).\n11. Finish turn diameter Ø30.0 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01897", "images": ["images/Shaft_01897.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.7 mm and length at least 272.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 115.5 mm (from Z=0.0 to Z=115.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 64.0 mm (from Z=0.0 to Z=151.9).\n10. Finish turn diameter Ø39.5 mm over length 87.9 mm (from Z=0.0 to Z=87.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04908", "images": ["images/Shaft_04908.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.6 mm and length at least 120.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02086", "images": ["images/Shaft_02086.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.0 mm and length at least 121.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.4 mm over length 11.2 mm (from Z=0.0 to Z=85.3).\n9. Finish turn diameter Ø46.4 mm over length 14.2 mm (from Z=0.0 to Z=74.1).\n10. Finish turn diameter Ø38.7 mm over length 5.5 mm (from Z=0.0 to Z=59.9).\n11. Finish turn diameter Ø32.8 mm over length 13.0 mm (from Z=0.0 to Z=54.4).\n12. Finish turn diameter Ø30.0 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00078", "images": ["images/Shaft_00078.png", "detail_png/Shaft_00078_length.png", "detail_png/Shaft_00078_diam.png", "detail_png/Shaft_00078_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.5 mm and length at least 169.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.8 mm over length 69.4 mm (from Z=0.0 to Z=119.9).\n9. Finish turn diameter Ø30.0 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02416", "images": ["images/Shaft_02416.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.3 mm and length at least 193.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 123.2 mm (from Z=0.0 to Z=123.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02974", "images": ["images/Shaft_02974.png", "detail_png/Shaft_02974_length.png", "detail_png/Shaft_02974_diam.png", "detail_png/Shaft_02974_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.0 mm and length at least 161.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.5 mm over length 37.2 mm (from Z=0.0 to Z=98.5).\n9. Finish turn diameter Ø58.1 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01650", "images": ["images/Shaft_01650.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.7 mm and length at least 106.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.0 mm over length 63.8 mm (from Z=0.0 to Z=91.4).\n9. Finish turn diameter Ø30.0 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00201", "images": ["images/Shaft_00201.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.7 mm and length at least 130.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 25.5 mm (from Z=0.0 to Z=107.8).\n9. Finish turn diameter Ø32.3 mm over length 30.1 mm (from Z=0.0 to Z=82.3).\n10. Finish turn diameter Ø30.0 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04839", "images": ["images/Shaft_04839.png", "detail_png/Shaft_04839_length.png", "detail_png/Shaft_04839_diam.png", "detail_png/Shaft_04839_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 219.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.3 mm (from Z=0.0 to Z=146.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.3 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00566", "images": ["images/Shaft_00566.png", "detail_png/Shaft_00566_length.png", "detail_png/Shaft_00566_diam.png", "detail_png/Shaft_00566_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.7 mm and length at least 78.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.1 mm over length 17.8 mm (from Z=0.0 to Z=53.0).\n9. Finish turn diameter Ø45.4 mm over length 15.8 mm (from Z=0.0 to Z=35.2).\n10. Finish turn diameter Ø34.4 mm over length 14.4 mm (from Z=0.0 to Z=19.4).\n11. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00160", "images": ["images/Shaft_00160.png", "detail_png/Shaft_00160_length.png", "detail_png/Shaft_00160_diam.png", "detail_png/Shaft_00160_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.7 mm and length at least 295.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 249.2 mm (from Z=0.0 to Z=249.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01318", "images": ["images/Shaft_01318.png", "detail_png/Shaft_01318_length.png", "detail_png/Shaft_01318_diam.png", "detail_png/Shaft_01318_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.6 mm and length at least 137.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 10.1 mm (from Z=0.0 to Z=104.1).\n9. Finish turn diameter Ø56.1 mm over length 14.1 mm (from Z=0.0 to Z=94.0).\n10. Finish turn diameter Ø37.3 mm over length 19.8 mm (from Z=0.0 to Z=79.9).\n11. Finish turn diameter Ø30.0 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02109", "images": ["images/Shaft_02109.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.1 mm and length at least 89.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 21.4 mm (from Z=0.0 to Z=65.2).\n9. Finish turn diameter Ø61.7 mm over length 6.4 mm (from Z=0.0 to Z=43.8).\n10. Finish turn diameter Ø55.8 mm over length 8.4 mm (from Z=0.0 to Z=37.4).\n11. Finish turn diameter Ø47.4 mm over length 11.3 mm (from Z=0.0 to Z=29.0).\n12. Finish turn diameter Ø34.0 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02675", "images": ["images/Shaft_02675.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.7 mm and length at least 249.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.2 mm over length 63.9 mm (from Z=0.0 to Z=211.6).\n10. Finish turn diameter Ø60.3 mm over length 63.6 mm (from Z=0.0 to Z=147.7).\n11. Finish turn diameter Ø53.9 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03294", "images": ["images/Shaft_03294.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.5 mm and length at least 152.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.2 mm (from Z=0.0 to Z=132.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03579", "images": ["images/Shaft_03579.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.7 mm and length at least 166.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.6 mm over length 45.0 mm (from Z=0.0 to Z=118.3).\n9. Finish turn diameter Ø33.3 mm over length 18.9 mm (from Z=0.0 to Z=73.3).\n10. Finish turn diameter Ø30.0 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03103", "images": ["images/Shaft_03103.png", "detail_png/Shaft_03103_length.png", "detail_png/Shaft_03103_diam.png", "detail_png/Shaft_03103_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.3 mm and length at least 300.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.5 mm over length 44.8 mm (from Z=0.0 to Z=254.6).\n10. Finish turn diameter Ø51.3 mm over length 95.4 mm (from Z=0.0 to Z=209.8).\n11. Finish turn diameter Ø44.7 mm over length 28.2 mm (from Z=0.0 to Z=114.4).\n12. Finish turn diameter Ø36.6 mm over length 66.0 mm (from Z=0.0 to Z=86.2).\n13. Finish turn diameter Ø30.0 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02642", "images": ["images/Shaft_02642.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 124.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 83.6 mm (from Z=0.0 to Z=83.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.9 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00155", "images": ["images/Shaft_00155.png", "detail_png/Shaft_00155_length.png", "detail_png/Shaft_00155_diam.png", "detail_png/Shaft_00155_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.5 mm and length at least 114.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.2 mm over length 37.0 mm (from Z=0.0 to Z=61.6).\n9. Finish turn diameter Ø53.1 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01605", "images": ["images/Shaft_01605.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 161.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 124.4 mm (from Z=0.0 to Z=124.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.4 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02236", "images": ["images/Shaft_02236.png", "detail_png/Shaft_02236_length.png", "detail_png/Shaft_02236_diam.png", "detail_png/Shaft_02236_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.4 mm and length at least 79.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 14.8 mm (from Z=0.0 to Z=54.0).\n9. Finish turn diameter Ø30.0 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02823", "images": ["images/Shaft_02823.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.2 mm and length at least 279.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.2 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.7 mm over length 41.1 mm (from Z=0.0 to Z=235.8).\n10. Finish turn diameter Ø30.0 mm over length 194.7 mm (from Z=0.0 to Z=194.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00904", "images": ["images/Shaft_00904.png", "detail_png/Shaft_00904_length.png", "detail_png/Shaft_00904_diam.png", "detail_png/Shaft_00904_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.9 mm and length at least 165.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 65.8 mm (from Z=0.0 to Z=147.9).\n9. Finish turn diameter Ø34.3 mm over length 82.1 mm (from Z=0.0 to Z=82.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02098", "images": ["images/Shaft_02098.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.6 mm and length at least 282.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.6 mm over length 93.6 mm (from Z=0.0 to Z=227.8).\n10. Finish turn diameter Ø30.0 mm over length 134.2 mm (from Z=0.0 to Z=134.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04965", "images": ["images/Shaft_04965.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.7 mm and length at least 202.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 26.3 mm (from Z=0.0 to Z=136.9).\n10. Finish turn diameter Ø36.2 mm over length 83.2 mm (from Z=0.0 to Z=110.6).\n11. Finish turn diameter Ø30.0 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04295", "images": ["images/Shaft_04295.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.5 mm and length at least 240.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 206.8 mm (from Z=0.0 to Z=206.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00559", "images": ["images/Shaft_00559.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.9 mm and length at least 190.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.4 mm over length 34.0 mm (from Z=0.0 to Z=137.6).\n9. Finish turn diameter Ø40.5 mm over length 69.1 mm (from Z=0.0 to Z=103.6).\n10. Finish turn diameter Ø30.0 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02485", "images": ["images/Shaft_02485.png", "detail_png/Shaft_02485_length.png", "detail_png/Shaft_02485_diam.png", "detail_png/Shaft_02485_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.9 mm and length at least 236.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.2 mm over length 94.6 mm (from Z=0.0 to Z=155.8).\n10. Finish turn diameter Ø53.4 mm over length 41.7 mm (from Z=0.0 to Z=61.2).\n11. Finish turn diameter Ø44.6 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04041", "images": ["images/Shaft_04041.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.7 mm and length at least 185.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.0 mm over length 97.8 mm (from Z=0.0 to Z=151.2).\n10. Finish turn diameter Ø30.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03003", "images": ["images/Shaft_03003.png", "detail_png/Shaft_03003_length.png", "detail_png/Shaft_03003_diam.png", "detail_png/Shaft_03003_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.7 mm and length at least 146.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.4 mm over length 21.4 mm (from Z=0.0 to Z=100.6).\n9. Finish turn diameter Ø47.7 mm over length 44.6 mm (from Z=0.0 to Z=79.2).\n10. Finish turn diameter Ø42.6 mm over length 14.1 mm (from Z=0.0 to Z=34.6).\n11. Finish turn diameter Ø30.0 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00837", "images": ["images/Shaft_00837.png", "detail_png/Shaft_00837_length.png", "detail_png/Shaft_00837_diam.png", "detail_png/Shaft_00837_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.9 mm and length at least 158.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.9 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 7.0 mm (from Z=0.0 to Z=118.2).\n9. Finish turn diameter Ø33.3 mm over length 28.5 mm (from Z=0.0 to Z=111.2).\n10. Finish turn diameter Ø30.0 mm over length 82.7 mm (from Z=0.0 to Z=82.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01963", "images": ["images/Shaft_01963.png", "detail_png/Shaft_01963_length.png", "detail_png/Shaft_01963_diam.png", "detail_png/Shaft_01963_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.4 mm and length at least 185.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 77.1 mm (from Z=0.0 to Z=77.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 103.6 mm (from Z=0.0 to Z=103.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01747", "images": ["images/Shaft_01747.png", "detail_png/Shaft_01747_length.png", "detail_png/Shaft_01747_diam.png", "detail_png/Shaft_01747_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.0 mm and length at least 255.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.1 mm over length 49.9 mm (from Z=0.0 to Z=232.0).\n10. Finish turn diameter Ø34.5 mm over length 35.1 mm (from Z=0.0 to Z=182.1).\n11. Finish turn diameter Ø30.0 mm over length 147.0 mm (from Z=0.0 to Z=147.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04286", "images": ["images/Shaft_04286.png", "detail_png/Shaft_04286_length.png", "detail_png/Shaft_04286_diam.png", "detail_png/Shaft_04286_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.6 mm and length at least 145.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.2 mm (from Z=0.0 to Z=102.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03206", "images": ["images/Shaft_03206.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.5 mm and length at least 210.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 155.3 mm (from Z=0.0 to Z=155.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04455", "images": ["images/Shaft_04455.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.7 mm and length at least 192.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.7 mm over length 71.0 mm (from Z=0.0 to Z=71.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.9 mm over length 92.1 mm (from Z=0.0 to Z=116.0).\n9. Finish turn diameter Ø30.6 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04949", "images": ["images/Shaft_04949.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.0 mm and length at least 85.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.7 mm (from Z=0.0 to Z=59.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02885", "images": ["images/Shaft_02885.png", "detail_png/Shaft_02885_length.png", "detail_png/Shaft_02885_diam.png", "detail_png/Shaft_02885_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.6 mm and length at least 247.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.1 mm over length 109.1 mm (from Z=0.0 to Z=214.1).\n10. Finish turn diameter Ø30.0 mm over length 105.0 mm (from Z=0.0 to Z=105.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00952", "images": ["images/Shaft_00952.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.0 mm and length at least 244.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 70.9 mm (from Z=0.0 to Z=162.6).\n10. Finish turn diameter Ø30.0 mm over length 91.7 mm (from Z=0.0 to Z=91.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02728", "images": ["images/Shaft_02728.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.6 mm and length at least 212.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.9 mm over length 15.5 mm (from Z=0.0 to Z=190.5).\n10. Finish turn diameter Ø58.8 mm over length 14.5 mm (from Z=0.0 to Z=175.0).\n11. Finish turn diameter Ø48.3 mm over length 43.8 mm (from Z=0.0 to Z=160.5).\n12. Finish turn diameter Ø36.4 mm over length 77.4 mm (from Z=0.0 to Z=116.7).\n13. Finish turn diameter Ø30.5 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03693", "images": ["images/Shaft_03693.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.9 mm and length at least 311.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 81.6 mm (from Z=0.0 to Z=81.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 48.5 mm (from Z=0.0 to Z=224.6).\n10. Finish turn diameter Ø37.1 mm over length 28.8 mm (from Z=0.0 to Z=176.1).\n11. Finish turn diameter Ø30.0 mm over length 147.3 mm (from Z=0.0 to Z=147.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04349", "images": ["images/Shaft_04349.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 124.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.9 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04132", "images": ["images/Shaft_04132.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.7 mm and length at least 242.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.4 mm over length 98.9 mm (from Z=0.0 to Z=205.5).\n10. Finish turn diameter Ø48.2 mm over length 106.6 mm (from Z=0.0 to Z=106.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01600", "images": ["images/Shaft_01600.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.3 mm and length at least 160.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.3 mm over length 32.9 mm (from Z=0.0 to Z=126.9).\n10. Finish turn diameter Ø30.0 mm over length 94.0 mm (from Z=0.0 to Z=94.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02905", "images": ["images/Shaft_02905.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.4 mm and length at least 310.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 71.6 mm (from Z=0.0 to Z=258.3).\n10. Finish turn diameter Ø30.0 mm over length 186.7 mm (from Z=0.0 to Z=186.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00604", "images": ["images/Shaft_00604.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.7 mm and length at least 115.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.7 mm over length 12.3 mm (from Z=0.0 to Z=92.0).\n9. Finish turn diameter Ø59.9 mm over length 31.2 mm (from Z=0.0 to Z=79.7).\n10. Finish turn diameter Ø55.4 mm over length 25.2 mm (from Z=0.0 to Z=48.5).\n11. Finish turn diameter Ø49.6 mm over length 5.0 mm (from Z=0.0 to Z=23.3).\n12. Finish turn diameter Ø40.1 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03140", "images": ["images/Shaft_03140.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.0 mm and length at least 285.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.0 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 238.2 mm (from Z=0.0 to Z=238.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03845", "images": ["images/Shaft_03845.png", "detail_png/Shaft_03845_length.png", "detail_png/Shaft_03845_diam.png", "detail_png/Shaft_03845_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.6 mm and length at least 249.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 160.7 mm (from Z=0.0 to Z=160.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03809", "images": ["images/Shaft_03809.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.6 mm and length at least 112.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.2 mm over length 40.4 mm (from Z=0.0 to Z=50.0).\n9. Finish turn diameter Ø38.0 mm over length 9.6 mm (from Z=0.0 to Z=9.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00173", "images": ["images/Shaft_00173.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 96.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 75.1 mm (from Z=0.0 to Z=75.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.4 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01127", "images": ["images/Shaft_01127.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.1 mm and length at least 246.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.1 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 189.5 mm (from Z=0.0 to Z=189.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00521", "images": ["images/Shaft_00521.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.4 mm and length at least 82.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.2 mm over length 6.7 mm (from Z=0.0 to Z=54.3).\n9. Finish turn diameter Ø54.1 mm over length 14.1 mm (from Z=0.0 to Z=47.6).\n10. Finish turn diameter Ø36.5 mm over length 7.9 mm (from Z=0.0 to Z=33.5).\n11. Finish turn diameter Ø32.7 mm over length 20.6 mm (from Z=0.0 to Z=25.6).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02461", "images": ["images/Shaft_02461.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.0 mm and length at least 270.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 214.3 mm (from Z=0.0 to Z=214.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04603", "images": ["images/Shaft_04603.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.5 mm and length at least 276.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.5 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.2 mm over length 12.6 mm (from Z=0.0 to Z=186.5).\n10. Finish turn diameter Ø35.9 mm over length 33.4 mm (from Z=0.0 to Z=173.9).\n11. Finish turn diameter Ø31.1 mm over length 54.6 mm (from Z=0.0 to Z=140.5).\n12. Finish turn diameter Ø30.0 mm over length 85.9 mm (from Z=0.0 to Z=85.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01170", "images": ["images/Shaft_01170.png", "detail_png/Shaft_01170_length.png", "detail_png/Shaft_01170_diam.png", "detail_png/Shaft_01170_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.3 mm and length at least 87.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 64.7 mm (from Z=0.0 to Z=64.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03514", "images": ["images/Shaft_03514.png", "detail_png/Shaft_03514_length.png", "detail_png/Shaft_03514_diam.png", "detail_png/Shaft_03514_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.1 mm and length at least 311.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.1 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.2 mm over length 89.9 mm (from Z=0.0 to Z=201.5).\n10. Finish turn diameter Ø30.0 mm over length 111.6 mm (from Z=0.0 to Z=111.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04553", "images": ["images/Shaft_04553.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.0 mm and length at least 109.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.8 mm over length 20.1 mm (from Z=0.0 to Z=92.4).\n9. Finish turn diameter Ø30.0 mm over length 72.3 mm (from Z=0.0 to Z=72.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00626", "images": ["images/Shaft_00626.png", "detail_png/Shaft_00626_length.png", "detail_png/Shaft_00626_diam.png", "detail_png/Shaft_00626_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.7 mm and length at least 257.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 194.1 mm (from Z=0.0 to Z=194.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00447", "images": ["images/Shaft_00447.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.5 mm and length at least 315.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 96.3 mm (from Z=0.0 to Z=96.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.1 mm over length 67.8 mm (from Z=0.0 to Z=214.2).\n10. Finish turn diameter Ø38.6 mm over length 12.6 mm (from Z=0.0 to Z=146.4).\n11. Finish turn diameter Ø30.0 mm over length 133.8 mm (from Z=0.0 to Z=133.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00810", "images": ["images/Shaft_00810.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.0 mm and length at least 273.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 25.8 mm (from Z=0.0 to Z=214.7).\n10. Finish turn diameter Ø30.0 mm over length 188.9 mm (from Z=0.0 to Z=188.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04231", "images": ["images/Shaft_04231.png", "detail_png/Shaft_04231_length.png", "detail_png/Shaft_04231_diam.png", "detail_png/Shaft_04231_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.3 mm and length at least 147.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.7 mm over length 60.4 mm (from Z=0.0 to Z=108.4).\n9. Finish turn diameter Ø49.4 mm over length 18.7 mm (from Z=0.0 to Z=48.0).\n10. Finish turn diameter Ø36.5 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03250", "images": ["images/Shaft_03250.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.0 mm and length at least 281.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 247.4 mm (from Z=0.0 to Z=247.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04094", "images": ["images/Shaft_04094.png", "detail_png/Shaft_04094_length.png", "detail_png/Shaft_04094_diam.png", "detail_png/Shaft_04094_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.7 mm and length at least 103.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.3 mm over length 8.6 mm (from Z=0.0 to Z=71.5).\n9. Finish turn diameter Ø33.5 mm over length 37.2 mm (from Z=0.0 to Z=62.9).\n10. Finish turn diameter Ø30.0 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02698", "images": ["images/Shaft_02698.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.8 mm and length at least 161.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.3 mm over length 24.5 mm (from Z=0.0 to Z=127.0).\n10. Finish turn diameter Ø30.0 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00424", "images": ["images/Shaft_00424.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.6 mm and length at least 257.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 14.7 mm (from Z=0.0 to Z=228.6).\n10. Finish turn diameter Ø30.0 mm over length 213.9 mm (from Z=0.0 to Z=213.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02489", "images": ["images/Shaft_02489.png", "detail_png/Shaft_02489_length.png", "detail_png/Shaft_02489_diam.png", "detail_png/Shaft_02489_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.4 mm and length at least 83.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.0 mm over length 6.5 mm (from Z=0.0 to Z=50.6).\n9. Finish turn diameter Ø47.3 mm over length 27.9 mm (from Z=0.0 to Z=44.1).\n10. Finish turn diameter Ø32.0 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04341", "images": ["images/Shaft_04341.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.4 mm and length at least 88.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.3 mm over length 5.4 mm (from Z=0.0 to Z=78.0).\n9. Finish turn diameter Ø30.0 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03935", "images": ["images/Shaft_03935.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.3 mm and length at least 120.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.7 mm over length 25.6 mm (from Z=0.0 to Z=86.9).\n9. Finish turn diameter Ø54.6 mm over length 41.5 mm (from Z=0.0 to Z=61.3).\n10. Finish turn diameter Ø43.9 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01306", "images": ["images/Shaft_01306.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.9 mm and length at least 295.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 43.5 mm (from Z=0.0 to Z=43.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 247.0 mm (from Z=0.0 to Z=247.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04922", "images": ["images/Shaft_04922.png", "detail_png/Shaft_04922_length.png", "detail_png/Shaft_04922_diam.png", "detail_png/Shaft_04922_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.4 mm and length at least 244.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 57.5 mm (from Z=0.0 to Z=57.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.9 mm over length 64.8 mm (from Z=0.0 to Z=182.1).\n10. Finish turn diameter Ø30.0 mm over length 117.3 mm (from Z=0.0 to Z=117.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02677", "images": ["images/Shaft_02677.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.1 mm and length at least 231.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 78.4 mm (from Z=0.0 to Z=78.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.8 mm over length 14.9 mm (from Z=0.0 to Z=147.6).\n10. Finish turn diameter Ø30.0 mm over length 132.7 mm (from Z=0.0 to Z=132.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00549", "images": ["images/Shaft_00549.png", "detail_png/Shaft_00549_length.png", "detail_png/Shaft_00549_diam.png", "detail_png/Shaft_00549_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.3 mm and length at least 164.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.3 mm over length 46.9 mm (from Z=0.0 to Z=116.3).\n9. Finish turn diameter Ø44.5 mm over length 50.2 mm (from Z=0.0 to Z=69.4).\n10. Finish turn diameter Ø30.0 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00970", "images": ["images/Shaft_00970.png", "detail_png/Shaft_00970_length.png", "detail_png/Shaft_00970_diam.png", "detail_png/Shaft_00970_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.3 mm and length at least 93.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.4 mm over length 13.9 mm (from Z=0.0 to Z=68.6).\n9. Finish turn diameter Ø30.0 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01013", "images": ["images/Shaft_01013.png", "detail_png/Shaft_01013_length.png", "detail_png/Shaft_01013_diam.png", "detail_png/Shaft_01013_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.9 mm and length at least 122.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.5 mm over length 19.2 mm (from Z=0.0 to Z=61.3).\n9. Finish turn diameter Ø45.7 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02299", "images": ["images/Shaft_02299.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.8 mm and length at least 208.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 5.6 mm (from Z=0.0 to Z=5.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.9 mm over length 48.9 mm (from Z=0.0 to Z=197.9).\n10. Finish turn diameter Ø36.5 mm over length 10.7 mm (from Z=0.0 to Z=149.0).\n11. Finish turn diameter Ø30.0 mm over length 138.3 mm (from Z=0.0 to Z=138.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04339", "images": ["images/Shaft_04339.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.0 mm and length at least 233.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.2 mm over length 38.7 mm (from Z=0.0 to Z=221.1).\n10. Finish turn diameter Ø53.7 mm over length 26.0 mm (from Z=0.0 to Z=182.4).\n11. Finish turn diameter Ø44.3 mm over length 26.7 mm (from Z=0.0 to Z=156.4).\n12. Finish turn diameter Ø37.2 mm over length 57.3 mm (from Z=0.0 to Z=129.7).\n13. Finish turn diameter Ø30.0 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02947", "images": ["images/Shaft_02947.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.5 mm and length at least 270.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 75.8 mm (from Z=0.0 to Z=75.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.3 mm over length 115.4 mm (from Z=0.0 to Z=189.8).\n10. Finish turn diameter Ø30.0 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01076", "images": ["images/Shaft_01076.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 273.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 171.0 mm (from Z=0.0 to Z=171.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 97.8 mm (from Z=0.0 to Z=97.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00765", "images": ["images/Shaft_00765.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.4 mm and length at least 237.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 58.7 mm (from Z=0.0 to Z=58.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 174.0 mm (from Z=0.0 to Z=174.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01459", "images": ["images/Shaft_01459.png", "detail_png/Shaft_01459_length.png", "detail_png/Shaft_01459_diam.png", "detail_png/Shaft_01459_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.1 mm and length at least 76.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.1 mm over length 8.4 mm (from Z=0.0 to Z=8.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 35.2 mm (from Z=0.0 to Z=63.4).\n9. Finish turn diameter Ø37.7 mm over length 8.6 mm (from Z=0.0 to Z=28.2).\n10. Finish turn diameter Ø30.0 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04415", "images": ["images/Shaft_04415.png", "detail_png/Shaft_04415_length.png", "detail_png/Shaft_04415_diam.png", "detail_png/Shaft_04415_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.5 mm and length at least 159.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.6 mm over length 45.7 mm (from Z=0.0 to Z=121.8).\n9. Finish turn diameter Ø54.1 mm over length 19.3 mm (from Z=0.0 to Z=76.1).\n10. Finish turn diameter Ø42.5 mm over length 40.9 mm (from Z=0.0 to Z=56.8).\n11. Finish turn diameter Ø30.0 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00366", "images": ["images/Shaft_00366.png", "detail_png/Shaft_00366_length.png", "detail_png/Shaft_00366_diam.png", "detail_png/Shaft_00366_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.4 mm and length at least 217.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 97.9 mm (from Z=0.0 to Z=166.2).\n10. Finish turn diameter Ø46.5 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02231", "images": ["images/Shaft_02231.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.0 mm and length at least 246.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 104.5 mm (from Z=0.0 to Z=211.7).\n10. Finish turn diameter Ø35.6 mm over length 107.2 mm (from Z=0.0 to Z=107.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03804", "images": ["images/Shaft_03804.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.5 mm and length at least 148.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.4 mm (from Z=0.0 to Z=111.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01021", "images": ["images/Shaft_01021.png", "detail_png/Shaft_01021_length.png", "detail_png/Shaft_01021_diam.png", "detail_png/Shaft_01021_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.6 mm and length at least 125.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.5 mm over length 15.3 mm (from Z=0.0 to Z=57.2).\n9. Finish turn diameter Ø30.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02997", "images": ["images/Shaft_02997.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.9 mm and length at least 173.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.9 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.6 mm over length 30.6 mm (from Z=0.0 to Z=115.6).\n9. Finish turn diameter Ø36.1 mm over length 40.8 mm (from Z=0.0 to Z=85.0).\n10. Finish turn diameter Ø30.3 mm over length 9.5 mm (from Z=0.0 to Z=44.2).\n11. Finish turn diameter Ø30.0 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01809", "images": ["images/Shaft_01809.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.3 mm and length at least 133.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 108.4 mm (from Z=0.0 to Z=108.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03343", "images": ["images/Shaft_03343.png", "detail_png/Shaft_03343_length.png", "detail_png/Shaft_03343_diam.png", "detail_png/Shaft_03343_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.2 mm and length at least 210.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.6 mm over length 15.2 mm (from Z=0.0 to Z=181.5).\n10. Finish turn diameter Ø65.2 mm over length 39.9 mm (from Z=0.0 to Z=166.3).\n11. Finish turn diameter Ø45.3 mm over length 57.3 mm (from Z=0.0 to Z=126.4).\n12. Finish turn diameter Ø37.5 mm over length 41.3 mm (from Z=0.0 to Z=69.1).\n13. Finish turn diameter Ø32.9 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03725", "images": ["images/Shaft_03725.png", "detail_png/Shaft_03725_length.png", "detail_png/Shaft_03725_diam.png", "detail_png/Shaft_03725_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.2 mm and length at least 212.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.7 mm over length 51.8 mm (from Z=0.0 to Z=159.2).\n10. Finish turn diameter Ø30.0 mm over length 107.4 mm (from Z=0.0 to Z=107.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03670", "images": ["images/Shaft_03670.png", "detail_png/Shaft_03670_length.png", "detail_png/Shaft_03670_diam.png", "detail_png/Shaft_03670_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.5 mm and length at least 112.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.9 mm over length 21.0 mm (from Z=0.0 to Z=102.1).\n9. Finish turn diameter Ø37.7 mm over length 21.2 mm (from Z=0.0 to Z=81.1).\n10. Finish turn diameter Ø31.8 mm over length 18.3 mm (from Z=0.0 to Z=59.9).\n11. Finish turn diameter Ø30.0 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00794", "images": ["images/Shaft_00794.png", "detail_png/Shaft_00794_length.png", "detail_png/Shaft_00794_diam.png", "detail_png/Shaft_00794_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 244.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 174.1 mm (from Z=0.0 to Z=174.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.5 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03959", "images": ["images/Shaft_03959.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.9 mm and length at least 89.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 9.6 mm (from Z=0.0 to Z=70.7).\n9. Finish turn diameter Ø30.0 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03915", "images": ["images/Shaft_03915.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.6 mm and length at least 280.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 49.0 mm (from Z=0.0 to Z=225.7).\n10. Finish turn diameter Ø33.8 mm over length 58.5 mm (from Z=0.0 to Z=176.7).\n11. Finish turn diameter Ø30.0 mm over length 118.2 mm (from Z=0.0 to Z=118.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00132", "images": ["images/Shaft_00132.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.8 mm and length at least 305.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 91.6 mm (from Z=0.0 to Z=91.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.7 mm over length 8.5 mm (from Z=0.0 to Z=208.6).\n10. Finish turn diameter Ø51.4 mm over length 10.5 mm (from Z=0.0 to Z=200.1).\n11. Finish turn diameter Ø33.3 mm over length 37.6 mm (from Z=0.0 to Z=189.6).\n12. Finish turn diameter Ø30.0 mm over length 152.0 mm (from Z=0.0 to Z=152.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03640", "images": ["images/Shaft_03640.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.1 mm and length at least 295.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 200.1 mm (from Z=0.0 to Z=200.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 46.8 mm (from Z=0.0 to Z=89.9).\n10. Finish turn diameter Ø35.5 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01358", "images": ["images/Shaft_01358.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.5 mm and length at least 242.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.3 mm over length 47.6 mm (from Z=0.0 to Z=211.1).\n10. Finish turn diameter Ø30.0 mm over length 163.5 mm (from Z=0.0 to Z=163.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04853", "images": ["images/Shaft_04853.png", "detail_png/Shaft_04853_length.png", "detail_png/Shaft_04853_diam.png", "detail_png/Shaft_04853_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 137.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 84.6 mm (from Z=0.0 to Z=84.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.5 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01606", "images": ["images/Shaft_01606.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.1 mm and length at least 244.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.9 mm over length 84.9 mm (from Z=0.0 to Z=164.1).\n10. Finish turn diameter Ø30.0 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03525", "images": ["images/Shaft_03525.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.4 mm and length at least 122.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 39.1 mm (from Z=0.0 to Z=69.0).\n9. Finish turn diameter Ø41.7 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02442", "images": ["images/Shaft_02442.png", "detail_png/Shaft_02442_length.png", "detail_png/Shaft_02442_diam.png", "detail_png/Shaft_02442_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.6 mm and length at least 87.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 6.2 mm (from Z=0.0 to Z=6.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.4 mm over length 8.6 mm (from Z=0.0 to Z=76.2).\n9. Finish turn diameter Ø30.0 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02982", "images": ["images/Shaft_02982.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 232.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 154.2 mm (from Z=0.0 to Z=154.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01001", "images": ["images/Shaft_01001.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.6 mm and length at least 318.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 105.9 mm (from Z=0.0 to Z=105.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.5 mm over length 40.3 mm (from Z=0.0 to Z=207.2).\n10. Finish turn diameter Ø33.2 mm over length 166.9 mm (from Z=0.0 to Z=166.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04407", "images": ["images/Shaft_04407.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.6 mm and length at least 278.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 91.7 mm (from Z=0.0 to Z=91.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.2 mm over length 81.7 mm (from Z=0.0 to Z=181.6).\n10. Finish turn diameter Ø49.9 mm over length 21.6 mm (from Z=0.0 to Z=99.9).\n11. Finish turn diameter Ø42.7 mm over length 62.7 mm (from Z=0.0 to Z=78.3).\n12. Finish turn diameter Ø33.9 mm over length 15.6 mm (from Z=0.0 to Z=15.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01040", "images": ["images/Shaft_01040.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.3 mm and length at least 173.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 143.1 mm (from Z=0.0 to Z=143.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03555", "images": ["images/Shaft_03555.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 272.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 152.3 mm (from Z=0.0 to Z=152.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 115.0 mm (from Z=0.0 to Z=115.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03295", "images": ["images/Shaft_03295.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.2 mm and length at least 180.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 84.6 mm (from Z=0.0 to Z=84.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.7 mm over length 69.7 mm (from Z=0.0 to Z=91.0).\n9. Finish turn diameter Ø30.0 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02403", "images": ["images/Shaft_02403.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.1 mm and length at least 198.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 40.8 mm (from Z=0.0 to Z=132.9).\n10. Finish turn diameter Ø51.6 mm over length 33.6 mm (from Z=0.0 to Z=92.1).\n11. Finish turn diameter Ø42.2 mm over length 18.2 mm (from Z=0.0 to Z=58.5).\n12. Finish turn diameter Ø36.2 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02594", "images": ["images/Shaft_02594.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.3 mm and length at least 93.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.6 mm (from Z=0.0 to Z=60.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01905", "images": ["images/Shaft_01905.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.5 mm and length at least 108.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.8 mm over length 40.0 mm (from Z=0.0 to Z=59.5).\n9. Finish turn diameter Ø37.9 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00671", "images": ["images/Shaft_00671.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.8 mm and length at least 273.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.1 mm over length 30.8 mm (from Z=0.0 to Z=225.1).\n10. Finish turn diameter Ø30.0 mm over length 194.3 mm (from Z=0.0 to Z=194.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00304", "images": ["images/Shaft_00304.png", "detail_png/Shaft_00304_length.png", "detail_png/Shaft_00304_diam.png", "detail_png/Shaft_00304_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.5 mm and length at least 232.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 76.4 mm (from Z=0.0 to Z=217.0).\n10. Finish turn diameter Ø47.0 mm over length 10.0 mm (from Z=0.0 to Z=140.6).\n11. Finish turn diameter Ø41.4 mm over length 30.7 mm (from Z=0.0 to Z=130.6).\n12. Finish turn diameter Ø30.0 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04224", "images": ["images/Shaft_04224.png", "detail_png/Shaft_04224_length.png", "detail_png/Shaft_04224_diam.png", "detail_png/Shaft_04224_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 155.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.2 mm over length 104.7 mm (from Z=0.0 to Z=104.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03956", "images": ["images/Shaft_03956.png", "detail_png/Shaft_03956_length.png", "detail_png/Shaft_03956_diam.png", "detail_png/Shaft_03956_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.0 mm and length at least 96.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.0 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01096", "images": ["images/Shaft_01096.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.7 mm and length at least 247.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.9 mm over length 53.1 mm (from Z=0.0 to Z=226.7).\n10. Finish turn diameter Ø32.1 mm over length 15.5 mm (from Z=0.0 to Z=173.6).\n11. Finish turn diameter Ø30.0 mm over length 158.1 mm (from Z=0.0 to Z=158.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01994", "images": ["images/Shaft_01994.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.4 mm and length at least 318.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 114.1 mm (from Z=0.0 to Z=114.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.2 mm over length 110.8 mm (from Z=0.0 to Z=198.9).\n10. Finish turn diameter Ø53.1 mm over length 21.2 mm (from Z=0.0 to Z=88.1).\n11. Finish turn diameter Ø45.2 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03403", "images": ["images/Shaft_03403.png", "detail_png/Shaft_03403_length.png", "detail_png/Shaft_03403_diam.png", "detail_png/Shaft_03403_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.6 mm and length at least 111.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.4 mm over length 32.0 mm (from Z=0.0 to Z=62.4).\n9. Finish turn diameter Ø40.6 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04978", "images": ["images/Shaft_04978.png", "detail_png/Shaft_04978_length.png", "detail_png/Shaft_04978_diam.png", "detail_png/Shaft_04978_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 261.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.7 mm (from Z=0.0 to Z=178.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.4 mm over length 77.6 mm (from Z=0.0 to Z=77.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02736", "images": ["images/Shaft_02736.png", "detail_png/Shaft_02736_length.png", "detail_png/Shaft_02736_diam.png", "detail_png/Shaft_02736_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.1 mm and length at least 89.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.6 mm over length 31.3 mm (from Z=0.0 to Z=53.7).\n9. Finish turn diameter Ø30.0 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02960", "images": ["images/Shaft_02960.png", "detail_png/Shaft_02960_length.png", "detail_png/Shaft_02960_diam.png", "detail_png/Shaft_02960_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.8 mm and length at least 69.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03107", "images": ["images/Shaft_03107.png", "detail_png/Shaft_03107_length.png", "detail_png/Shaft_03107_diam.png", "detail_png/Shaft_03107_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.8 mm and length at least 303.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 79.9 mm (from Z=0.0 to Z=79.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.3 mm over length 30.9 mm (from Z=0.0 to Z=218.4).\n10. Finish turn diameter Ø41.1 mm over length 52.0 mm (from Z=0.0 to Z=187.5).\n11. Finish turn diameter Ø30.0 mm over length 135.5 mm (from Z=0.0 to Z=135.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04760", "images": ["images/Shaft_04760.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 109.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 53.5 mm (from Z=0.0 to Z=53.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.3 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03619", "images": ["images/Shaft_03619.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 197.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.3 mm (from Z=0.0 to Z=167.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04191", "images": ["images/Shaft_04191.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.3 mm and length at least 280.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.0 mm over length 70.2 mm (from Z=0.0 to Z=256.3).\n10. Finish turn diameter Ø30.0 mm over length 186.1 mm (from Z=0.0 to Z=186.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00651", "images": ["images/Shaft_00651.png", "detail_png/Shaft_00651_length.png", "detail_png/Shaft_00651_diam.png", "detail_png/Shaft_00651_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.2 mm and length at least 275.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 93.9 mm (from Z=0.0 to Z=93.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.0 mm (from Z=0.0 to Z=177.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04861", "images": ["images/Shaft_04861.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 218.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 170.1 mm (from Z=0.0 to Z=170.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.2 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03236", "images": ["images/Shaft_03236.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.6 mm and length at least 89.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.4 mm over length 12.2 mm (from Z=0.0 to Z=64.3).\n9. Finish turn diameter Ø40.8 mm over length 25.4 mm (from Z=0.0 to Z=52.1).\n10. Finish turn diameter Ø30.0 mm over length 26.7 mm (from Z=0.0 to Z=26.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04283", "images": ["images/Shaft_04283.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.3 mm and length at least 119.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.4 mm over length 5.0 mm (from Z=0.0 to Z=91.1).\n9. Finish turn diameter Ø64.4 mm over length 34.8 mm (from Z=0.0 to Z=86.1).\n10. Finish turn diameter Ø58.8 mm over length 20.5 mm (from Z=0.0 to Z=51.3).\n11. Finish turn diameter Ø43.0 mm over length 13.3 mm (from Z=0.0 to Z=30.8).\n12. Finish turn diameter Ø35.9 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01943", "images": ["images/Shaft_01943.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.2 mm and length at least 319.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.2 mm over length 105.3 mm (from Z=0.0 to Z=105.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 81.8 mm (from Z=0.0 to Z=209.4).\n10. Finish turn diameter Ø42.9 mm over length 16.9 mm (from Z=0.0 to Z=127.6).\n11. Finish turn diameter Ø38.5 mm over length 56.3 mm (from Z=0.0 to Z=110.7).\n12. Finish turn diameter Ø30.0 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04751", "images": ["images/Shaft_04751.png", "detail_png/Shaft_04751_length.png", "detail_png/Shaft_04751_diam.png", "detail_png/Shaft_04751_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.8 mm and length at least 277.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 105.8 mm (from Z=0.0 to Z=105.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 97.3 mm (from Z=0.0 to Z=166.4).\n10. Finish turn diameter Ø30.0 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04961", "images": ["images/Shaft_04961.png", "detail_png/Shaft_04961_length.png", "detail_png/Shaft_04961_diam.png", "detail_png/Shaft_04961_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.1 mm and length at least 163.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.4 mm over length 37.1 mm (from Z=0.0 to Z=123.6).\n9. Finish turn diameter Ø30.0 mm over length 86.5 mm (from Z=0.0 to Z=86.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01627", "images": ["images/Shaft_01627.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.8 mm and length at least 66.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 9.7 mm (from Z=0.0 to Z=9.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 51.7 mm (from Z=0.0 to Z=51.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04156", "images": ["images/Shaft_04156.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.9 mm and length at least 176.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 121.9 mm (from Z=0.0 to Z=121.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00295", "images": ["images/Shaft_00295.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.9 mm and length at least 110.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.4 mm over length 29.0 mm (from Z=0.0 to Z=91.6).\n9. Finish turn diameter Ø30.0 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03616", "images": ["images/Shaft_03616.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.5 mm and length at least 208.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.3 mm over length 48.2 mm (from Z=0.0 to Z=167.8).\n10. Finish turn diameter Ø43.8 mm over length 57.2 mm (from Z=0.0 to Z=119.6).\n11. Finish turn diameter Ø31.2 mm over length 56.4 mm (from Z=0.0 to Z=62.4).\n12. Finish turn diameter Ø30.0 mm over length 6.0 mm (from Z=0.0 to Z=6.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01873", "images": ["images/Shaft_01873.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.0 mm and length at least 117.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.3 mm over length 21.4 mm (from Z=0.0 to Z=67.4).\n9. Finish turn diameter Ø36.1 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01456", "images": ["images/Shaft_01456.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.6 mm and length at least 133.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.1 mm over length 50.1 mm (from Z=0.0 to Z=80.1).\n9. Finish turn diameter Ø30.0 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03571", "images": ["images/Shaft_03571.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.9 mm and length at least 322.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 298.0 mm (from Z=0.0 to Z=298.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03665", "images": ["images/Shaft_03665.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.3 mm and length at least 251.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.2 mm over length 60.1 mm (from Z=0.0 to Z=236.7).\n10. Finish turn diameter Ø34.1 mm over length 65.1 mm (from Z=0.0 to Z=176.6).\n11. Finish turn diameter Ø30.0 mm over length 111.5 mm (from Z=0.0 to Z=111.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01636", "images": ["images/Shaft_01636.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.2 mm and length at least 68.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.2 mm over length 5.6 mm (from Z=0.0 to Z=5.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.7 mm over length 11.8 mm (from Z=0.0 to Z=57.9).\n9. Finish turn diameter Ø43.3 mm over length 11.7 mm (from Z=0.0 to Z=46.1).\n10. Finish turn diameter Ø35.7 mm over length 13.3 mm (from Z=0.0 to Z=34.4).\n11. Finish turn diameter Ø30.0 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04806", "images": ["images/Shaft_04806.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.7 mm and length at least 89.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 25.0 mm (from Z=0.0 to Z=25.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.7 mm over length 6.3 mm (from Z=0.0 to Z=59.0).\n9. Finish turn diameter Ø48.6 mm over length 18.0 mm (from Z=0.0 to Z=52.7).\n10. Finish turn diameter Ø30.1 mm over length 13.4 mm (from Z=0.0 to Z=34.7).\n11. Finish turn diameter Ø30.0 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04619", "images": ["images/Shaft_04619.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.3 mm and length at least 126.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 113.4 mm (from Z=0.0 to Z=113.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01353", "images": ["images/Shaft_01353.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.6 mm and length at least 93.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00762", "images": ["images/Shaft_00762.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.9 mm and length at least 245.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.1 mm over length 55.9 mm (from Z=0.0 to Z=184.3).\n10. Finish turn diameter Ø47.3 mm over length 42.0 mm (from Z=0.0 to Z=128.4).\n11. Finish turn diameter Ø35.9 mm over length 51.4 mm (from Z=0.0 to Z=86.4).\n12. Finish turn diameter Ø30.0 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03981", "images": ["images/Shaft_03981.png", "detail_png/Shaft_03981_length.png", "detail_png/Shaft_03981_diam.png", "detail_png/Shaft_03981_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.5 mm and length at least 124.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 56.2 mm (from Z=0.0 to Z=56.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.7 mm over length 26.3 mm (from Z=0.0 to Z=63.3).\n9. Finish turn diameter Ø40.4 mm over length 11.1 mm (from Z=0.0 to Z=37.0).\n10. Finish turn diameter Ø32.9 mm over length 10.1 mm (from Z=0.0 to Z=25.9).\n11. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00757", "images": ["images/Shaft_00757.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.9 mm and length at least 78.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.7 mm over length 13.4 mm (from Z=0.0 to Z=68.0).\n9. Finish turn diameter Ø40.4 mm over length 14.4 mm (from Z=0.0 to Z=54.6).\n10. Finish turn diameter Ø32.7 mm over length 13.3 mm (from Z=0.0 to Z=40.2).\n11. Finish turn diameter Ø30.0 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00491", "images": ["images/Shaft_00491.png", "detail_png/Shaft_00491_length.png", "detail_png/Shaft_00491_diam.png", "detail_png/Shaft_00491_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.6 mm and length at least 162.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.0 mm over length 25.5 mm (from Z=0.0 to Z=106.4).\n9. Finish turn diameter Ø36.8 mm over length 5.8 mm (from Z=0.0 to Z=80.9).\n10. Finish turn diameter Ø30.6 mm over length 51.9 mm (from Z=0.0 to Z=75.1).\n11. Finish turn diameter Ø30.0 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03847", "images": ["images/Shaft_03847.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.8 mm and length at least 72.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 6.0 mm (from Z=0.0 to Z=6.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 19.4 mm (from Z=0.0 to Z=61.3).\n9. Finish turn diameter Ø42.9 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04917", "images": ["images/Shaft_04917.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.0 mm and length at least 268.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 119.0 mm (from Z=0.0 to Z=119.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.6 mm over length 67.8 mm (from Z=0.0 to Z=144.2).\n10. Finish turn diameter Ø44.4 mm over length 29.1 mm (from Z=0.0 to Z=76.4).\n11. Finish turn diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04818", "images": ["images/Shaft_04818.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 137.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 119.3 mm (from Z=0.0 to Z=119.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02421", "images": ["images/Shaft_02421.png", "detail_png/Shaft_02421_length.png", "detail_png/Shaft_02421_diam.png", "detail_png/Shaft_02421_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.5 mm and length at least 296.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.0 mm (from Z=0.0 to Z=224.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04202", "images": ["images/Shaft_04202.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 88.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 69.6 mm (from Z=0.0 to Z=69.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.8 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01845", "images": ["images/Shaft_01845.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 71.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.8 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02972", "images": ["images/Shaft_02972.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.9 mm and length at least 189.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.0 mm over length 55.5 mm (from Z=0.0 to Z=145.6).\n9. Finish turn diameter Ø41.8 mm over length 22.3 mm (from Z=0.0 to Z=90.1).\n10. Finish turn diameter Ø30.0 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00776", "images": ["images/Shaft_00776.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.7 mm and length at least 118.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 83.9 mm (from Z=0.0 to Z=83.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01799", "images": ["images/Shaft_01799.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.4 mm and length at least 271.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.4 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.8 mm over length 35.9 mm (from Z=0.0 to Z=192.5).\n10. Finish turn diameter Ø51.2 mm over length 30.9 mm (from Z=0.0 to Z=156.6).\n11. Finish turn diameter Ø39.7 mm over length 90.8 mm (from Z=0.0 to Z=125.7).\n12. Finish turn diameter Ø30.0 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02317", "images": ["images/Shaft_02317.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.4 mm and length at least 319.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 304.9 mm (from Z=0.0 to Z=304.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03996", "images": ["images/Shaft_03996.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.5 mm and length at least 111.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 24.8 mm (from Z=0.0 to Z=101.9).\n9. Finish turn diameter Ø57.0 mm over length 29.1 mm (from Z=0.0 to Z=77.1).\n10. Finish turn diameter Ø39.3 mm over length 28.9 mm (from Z=0.0 to Z=48.0).\n11. Finish turn diameter Ø30.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04797", "images": ["images/Shaft_04797.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 187.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 137.7 mm (from Z=0.0 to Z=137.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 45.1 mm (from Z=0.0 to Z=45.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01685", "images": ["images/Shaft_01685.png", "detail_png/Shaft_01685_length.png", "detail_png/Shaft_01685_diam.png", "detail_png/Shaft_01685_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 87.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.8 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04874", "images": ["images/Shaft_04874.png", "detail_png/Shaft_04874_length.png", "detail_png/Shaft_04874_diam.png", "detail_png/Shaft_04874_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.5 mm and length at least 311.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.7 mm over length 82.9 mm (from Z=0.0 to Z=265.9).\n10. Finish turn diameter Ø52.0 mm over length 36.1 mm (from Z=0.0 to Z=183.0).\n11. Finish turn diameter Ø44.5 mm over length 30.9 mm (from Z=0.0 to Z=146.9).\n12. Finish turn diameter Ø30.0 mm over length 116.0 mm (from Z=0.0 to Z=116.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00044", "images": ["images/Shaft_00044.png", "detail_png/Shaft_00044_length.png", "detail_png/Shaft_00044_diam.png", "detail_png/Shaft_00044_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.6 mm and length at least 148.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.6 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 67.9 mm (from Z=0.0 to Z=98.7).\n9. Finish turn diameter Ø31.8 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02025", "images": ["images/Shaft_02025.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.4 mm and length at least 203.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.5 mm over length 14.1 mm (from Z=0.0 to Z=108.3).\n10. Finish turn diameter Ø33.4 mm over length 94.2 mm (from Z=0.0 to Z=94.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02228", "images": ["images/Shaft_02228.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 131.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.2 mm (from Z=0.0 to Z=107.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03908", "images": ["images/Shaft_03908.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.5 mm and length at least 255.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.9 mm over length 89.8 mm (from Z=0.0 to Z=173.9).\n10. Finish turn diameter Ø45.6 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04024", "images": ["images/Shaft_04024.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.1 mm and length at least 322.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 269.3 mm (from Z=0.0 to Z=269.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01832", "images": ["images/Shaft_01832.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 283.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 172.4 mm (from Z=0.0 to Z=172.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 106.4 mm (from Z=0.0 to Z=106.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02313", "images": ["images/Shaft_02313.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.5 mm and length at least 264.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.0 mm over length 43.5 mm (from Z=0.0 to Z=199.8).\n10. Finish turn diameter Ø51.9 mm over length 38.2 mm (from Z=0.0 to Z=156.3).\n11. Finish turn diameter Ø37.3 mm over length 10.0 mm (from Z=0.0 to Z=118.1).\n12. Finish turn diameter Ø30.0 mm over length 108.1 mm (from Z=0.0 to Z=108.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04960", "images": ["images/Shaft_04960.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 154.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00536", "images": ["images/Shaft_00536.png", "detail_png/Shaft_00536_length.png", "detail_png/Shaft_00536_diam.png", "detail_png/Shaft_00536_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 288.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 220.1 mm (from Z=0.0 to Z=220.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03364", "images": ["images/Shaft_03364.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.7 mm and length at least 175.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.7 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.1 mm over length 31.7 mm (from Z=0.0 to Z=121.9).\n9. Finish turn diameter Ø39.7 mm over length 28.0 mm (from Z=0.0 to Z=90.2).\n10. Finish turn diameter Ø36.0 mm over length 6.1 mm (from Z=0.0 to Z=62.2).\n11. Finish turn diameter Ø30.0 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00356", "images": ["images/Shaft_00356.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.3 mm and length at least 177.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.3 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.7 mm over length 48.0 mm (from Z=0.0 to Z=120.0).\n9. Finish turn diameter Ø44.1 mm over length 50.2 mm (from Z=0.0 to Z=72.0).\n10. Finish turn diameter Ø39.1 mm over length 15.9 mm (from Z=0.0 to Z=21.8).\n11. Finish turn diameter Ø34.2 mm over length 5.9 mm (from Z=0.0 to Z=5.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04769", "images": ["images/Shaft_04769.png", "detail_png/Shaft_04769_length.png", "detail_png/Shaft_04769_diam.png", "detail_png/Shaft_04769_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.4 mm and length at least 300.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.1 mm over length 39.0 mm (from Z=0.0 to Z=207.3).\n10. Finish turn diameter Ø48.6 mm over length 49.3 mm (from Z=0.0 to Z=168.3).\n11. Finish turn diameter Ø35.7 mm over length 71.8 mm (from Z=0.0 to Z=119.0).\n12. Finish turn diameter Ø30.0 mm over length 47.2 mm (from Z=0.0 to Z=47.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04667", "images": ["images/Shaft_04667.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.7 mm and length at least 141.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 6.2 mm (from Z=0.0 to Z=6.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.9 mm over length 31.2 mm (from Z=0.0 to Z=130.6).\n9. Finish turn diameter Ø41.8 mm over length 49.1 mm (from Z=0.0 to Z=99.4).\n10. Finish turn diameter Ø30.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03431", "images": ["images/Shaft_03431.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.9 mm and length at least 204.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 58.1 mm (from Z=0.0 to Z=58.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 51.6 mm (from Z=0.0 to Z=141.8).\n10. Finish turn diameter Ø56.1 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04649", "images": ["images/Shaft_04649.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 150.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 114.2 mm (from Z=0.0 to Z=114.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.5 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02076", "images": ["images/Shaft_02076.png", "detail_png/Shaft_02076_length.png", "detail_png/Shaft_02076_diam.png", "detail_png/Shaft_02076_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.8 mm and length at least 137.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.1 mm over length 23.9 mm (from Z=0.0 to Z=96.7).\n9. Finish turn diameter Ø30.0 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00737", "images": ["images/Shaft_00737.png", "detail_png/Shaft_00737_length.png", "detail_png/Shaft_00737_diam.png", "detail_png/Shaft_00737_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.4 mm and length at least 229.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.8 mm (from Z=0.0 to Z=177.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04369", "images": ["images/Shaft_04369.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.8 mm and length at least 195.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.8 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 12.1 mm (from Z=0.0 to Z=141.6).\n10. Finish turn diameter Ø30.5 mm over length 28.7 mm (from Z=0.0 to Z=129.5).\n11. Finish turn diameter Ø30.0 mm over length 100.8 mm (from Z=0.0 to Z=100.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01199", "images": ["images/Shaft_01199.png", "detail_png/Shaft_01199_length.png", "detail_png/Shaft_01199_diam.png", "detail_png/Shaft_01199_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.0 mm and length at least 101.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.7 mm over length 17.8 mm (from Z=0.0 to Z=71.9).\n9. Finish turn diameter Ø56.2 mm over length 6.3 mm (from Z=0.0 to Z=54.1).\n10. Finish turn diameter Ø36.3 mm over length 25.1 mm (from Z=0.0 to Z=47.8).\n11. Finish turn diameter Ø30.0 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04120", "images": ["images/Shaft_04120.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.3 mm and length at least 323.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 24.7 mm (from Z=0.0 to Z=212.8).\n10. Finish turn diameter Ø30.0 mm over length 188.1 mm (from Z=0.0 to Z=188.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02279", "images": ["images/Shaft_02279.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.2 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 104.3 mm (from Z=0.0 to Z=104.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00901", "images": ["images/Shaft_00901.png", "detail_png/Shaft_00901_length.png", "detail_png/Shaft_00901_diam.png", "detail_png/Shaft_00901_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.4 mm and length at least 212.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.0 mm over length 126.4 mm (from Z=0.0 to Z=150.6).\n10. Finish turn diameter Ø52.9 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03977", "images": ["images/Shaft_03977.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.9 mm and length at least 222.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 48.5 mm (from Z=0.0 to Z=179.4).\n10. Finish turn diameter Ø30.0 mm over length 130.9 mm (from Z=0.0 to Z=130.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04952", "images": ["images/Shaft_04952.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.3 mm and length at least 287.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 94.1 mm (from Z=0.0 to Z=94.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.4 mm over length 76.8 mm (from Z=0.0 to Z=188.4).\n10. Finish turn diameter Ø50.8 mm over length 57.5 mm (from Z=0.0 to Z=111.6).\n11. Finish turn diameter Ø33.0 mm over length 18.7 mm (from Z=0.0 to Z=54.1).\n12. Finish turn diameter Ø30.0 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00235", "images": ["images/Shaft_00235.png", "detail_png/Shaft_00235_length.png", "detail_png/Shaft_00235_diam.png", "detail_png/Shaft_00235_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.6 mm and length at least 285.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 50.9 mm (from Z=0.0 to Z=50.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 55.5 mm (from Z=0.0 to Z=229.6).\n10. Finish turn diameter Ø33.4 mm over length 50.5 mm (from Z=0.0 to Z=174.1).\n11. Finish turn diameter Ø30.0 mm over length 123.6 mm (from Z=0.0 to Z=123.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04633", "images": ["images/Shaft_04633.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.7 mm and length at least 320.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.8 mm over length 131.9 mm (from Z=0.0 to Z=300.1).\n10. Finish turn diameter Ø56.6 mm over length 62.1 mm (from Z=0.0 to Z=168.2).\n11. Finish turn diameter Ø45.6 mm over length 74.1 mm (from Z=0.0 to Z=106.1).\n12. Finish turn diameter Ø40.9 mm over length 32.0 mm (from Z=0.0 to Z=32.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00061", "images": ["images/Shaft_00061.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.4 mm and length at least 287.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 209.0 mm (from Z=0.0 to Z=209.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01788", "images": ["images/Shaft_01788.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.7 mm and length at least 228.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 123.8 mm (from Z=0.0 to Z=123.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 18.9 mm (from Z=0.0 to Z=100.0).\n10. Finish turn diameter Ø34.1 mm over length 81.1 mm (from Z=0.0 to Z=81.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02371", "images": ["images/Shaft_02371.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.3 mm and length at least 322.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.5 mm over length 94.8 mm (from Z=0.0 to Z=215.0).\n10. Finish turn diameter Ø36.0 mm over length 19.3 mm (from Z=0.0 to Z=120.2).\n11. Finish turn diameter Ø30.0 mm over length 100.9 mm (from Z=0.0 to Z=100.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00020", "images": ["images/Shaft_00020.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.6 mm and length at least 296.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 96.6 mm (from Z=0.0 to Z=214.8).\n10. Finish turn diameter Ø48.9 mm over length 39.2 mm (from Z=0.0 to Z=118.2).\n11. Finish turn diameter Ø39.4 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03262", "images": ["images/Shaft_03262.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.8 mm and length at least 158.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 108.7 mm (from Z=0.0 to Z=108.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00013", "images": ["images/Shaft_00013.png", "detail_png/Shaft_00013_length.png", "detail_png/Shaft_00013_diam.png", "detail_png/Shaft_00013_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.2 mm and length at least 312.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 108.4 mm (from Z=0.0 to Z=108.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.6 mm over length 75.6 mm (from Z=0.0 to Z=198.9).\n10. Finish turn diameter Ø32.2 mm over length 91.7 mm (from Z=0.0 to Z=123.3).\n11. Finish turn diameter Ø30.0 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02655", "images": ["images/Shaft_02655.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.7 mm and length at least 212.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 12.4 mm (from Z=0.0 to Z=12.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.0 mm over length 50.1 mm (from Z=0.0 to Z=194.6).\n10. Finish turn diameter Ø32.5 mm over length 44.7 mm (from Z=0.0 to Z=144.5).\n11. Finish turn diameter Ø30.0 mm over length 99.8 mm (from Z=0.0 to Z=99.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04696", "images": ["images/Shaft_04696.png", "detail_png/Shaft_04696_length.png", "detail_png/Shaft_04696_diam.png", "detail_png/Shaft_04696_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.7 mm and length at least 242.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 86.5 mm (from Z=0.0 to Z=151.8).\n10. Finish turn diameter Ø45.6 mm over length 65.3 mm (from Z=0.0 to Z=65.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03946", "images": ["images/Shaft_03946.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.2 mm and length at least 255.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.2 mm over length 70.3 mm (from Z=0.0 to Z=70.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.6 mm over length 81.8 mm (from Z=0.0 to Z=180.6).\n10. Finish turn diameter Ø46.1 mm over length 35.3 mm (from Z=0.0 to Z=98.8).\n11. Finish turn diameter Ø36.8 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02561", "images": ["images/Shaft_02561.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.7 mm and length at least 321.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 247.5 mm (from Z=0.0 to Z=247.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.7 mm over length 31.5 mm (from Z=0.0 to Z=68.6).\n10. Finish turn diameter Ø30.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00769", "images": ["images/Shaft_00769.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.5 mm and length at least 311.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.5 mm over length 70.8 mm (from Z=0.0 to Z=70.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.3 mm over length 123.9 mm (from Z=0.0 to Z=236.1).\n10. Finish turn diameter Ø58.2 mm over length 112.2 mm (from Z=0.0 to Z=112.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04163", "images": ["images/Shaft_04163.png", "detail_png/Shaft_04163_length.png", "detail_png/Shaft_04163_diam.png", "detail_png/Shaft_04163_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.9 mm and length at least 253.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 206.0 mm (from Z=0.0 to Z=206.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01653", "images": ["images/Shaft_01653.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 139.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 126.0 mm (from Z=0.0 to Z=126.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.1 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03685", "images": ["images/Shaft_03685.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.3 mm and length at least 149.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.4 mm over length 24.2 mm (from Z=0.0 to Z=131.0).\n10. Finish turn diameter Ø30.0 mm over length 106.8 mm (from Z=0.0 to Z=106.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02170", "images": ["images/Shaft_02170.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.0 mm and length at least 233.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.8 mm over length 62.3 mm (from Z=0.0 to Z=165.4).\n10. Finish turn diameter Ø60.2 mm over length 16.3 mm (from Z=0.0 to Z=103.1).\n11. Finish turn diameter Ø49.9 mm over length 60.7 mm (from Z=0.0 to Z=86.8).\n12. Finish turn diameter Ø43.1 mm over length 20.4 mm (from Z=0.0 to Z=26.1).\n13. Finish turn diameter Ø30.0 mm over length 5.7 mm (from Z=0.0 to Z=5.7).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01573", "images": ["images/Shaft_01573.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.9 mm and length at least 226.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.9 mm over length 15.6 mm (from Z=0.0 to Z=132.8).\n10. Finish turn diameter Ø42.6 mm over length 46.8 mm (from Z=0.0 to Z=117.2).\n11. Finish turn diameter Ø31.9 mm over length 52.0 mm (from Z=0.0 to Z=70.4).\n12. Finish turn diameter Ø30.0 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01504", "images": ["images/Shaft_01504.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.2 mm and length at least 161.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 20.3 mm (from Z=0.0 to Z=127.0).\n10. Finish turn diameter Ø30.0 mm over length 106.7 mm (from Z=0.0 to Z=106.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03187", "images": ["images/Shaft_03187.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.4 mm and length at least 202.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.1 mm (from Z=0.0 to Z=149.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03768", "images": ["images/Shaft_03768.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.7 mm and length at least 222.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.7 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 156.9 mm (from Z=0.0 to Z=156.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00436", "images": ["images/Shaft_00436.png", "detail_png/Shaft_00436_length.png", "detail_png/Shaft_00436_diam.png", "detail_png/Shaft_00436_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.8 mm and length at least 320.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.8 mm over length 126.1 mm (from Z=0.0 to Z=268.2).\n10. Finish turn diameter Ø31.5 mm over length 33.7 mm (from Z=0.0 to Z=142.1).\n11. Finish turn diameter Ø30.0 mm over length 108.4 mm (from Z=0.0 to Z=108.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04659", "images": ["images/Shaft_04659.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.6 mm and length at least 82.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.9 mm over length 19.9 mm (from Z=0.0 to Z=72.6).\n9. Finish turn diameter Ø43.8 mm over length 23.5 mm (from Z=0.0 to Z=52.7).\n10. Finish turn diameter Ø31.8 mm over length 14.8 mm (from Z=0.0 to Z=29.2).\n11. Finish turn diameter Ø30.0 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02673", "images": ["images/Shaft_02673.png", "detail_png/Shaft_02673_length.png", "detail_png/Shaft_02673_diam.png", "detail_png/Shaft_02673_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.7 mm and length at least 240.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 87.5 mm (from Z=0.0 to Z=87.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 147.6 mm (from Z=0.0 to Z=147.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02145", "images": ["images/Shaft_02145.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.1 mm and length at least 317.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.2 mm over length 46.6 mm (from Z=0.0 to Z=256.8).\n10. Finish turn diameter Ø30.0 mm over length 210.2 mm (from Z=0.0 to Z=210.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02138", "images": ["images/Shaft_02138.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.8 mm and length at least 304.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 73.3 mm (from Z=0.0 to Z=73.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.4 mm over length 53.0 mm (from Z=0.0 to Z=226.1).\n10. Finish turn diameter Ø30.0 mm over length 173.1 mm (from Z=0.0 to Z=173.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00456", "images": ["images/Shaft_00456.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 258.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 172.4 mm (from Z=0.0 to Z=172.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.3 mm over length 80.9 mm (from Z=0.0 to Z=80.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02980", "images": ["images/Shaft_02980.png", "detail_png/Shaft_02980_length.png", "detail_png/Shaft_02980_diam.png", "detail_png/Shaft_02980_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.2 mm and length at least 80.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 14.5 mm (from Z=0.0 to Z=14.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.4 mm over length 9.5 mm (from Z=0.0 to Z=61.1).\n9. Finish turn diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04445", "images": ["images/Shaft_04445.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.5 mm and length at least 254.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.8 mm over length 88.8 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø34.6 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04149", "images": ["images/Shaft_04149.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.9 mm and length at least 108.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.9 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.8 mm over length 35.7 mm (from Z=0.0 to Z=61.1).\n9. Finish turn diameter Ø48.8 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01015", "images": ["images/Shaft_01015.png", "detail_png/Shaft_01015_length.png", "detail_png/Shaft_01015_diam.png", "detail_png/Shaft_01015_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.5 mm and length at least 165.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.5 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 134.1 mm (from Z=0.0 to Z=134.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03068", "images": ["images/Shaft_03068.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.2 mm and length at least 174.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.5 mm over length 69.6 mm (from Z=0.0 to Z=119.9).\n9. Finish turn diameter Ø30.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01815", "images": ["images/Shaft_01815.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.2 mm and length at least 165.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.2 mm over length 48.6 mm (from Z=0.0 to Z=113.6).\n9. Finish turn diameter Ø30.0 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04133", "images": ["images/Shaft_04133.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.7 mm and length at least 316.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.7 mm over length 57.2 mm (from Z=0.0 to Z=57.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 254.7 mm (from Z=0.0 to Z=254.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00214", "images": ["images/Shaft_00214.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.0 mm and length at least 73.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.0 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 51.2 mm (from Z=0.0 to Z=51.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02348", "images": ["images/Shaft_02348.png", "detail_png/Shaft_02348_length.png", "detail_png/Shaft_02348_diam.png", "detail_png/Shaft_02348_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.5 mm and length at least 158.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 12.4 mm (from Z=0.0 to Z=141.5).\n9. Finish turn diameter Ø43.0 mm over length 18.0 mm (from Z=0.0 to Z=129.1).\n10. Finish turn diameter Ø35.4 mm over length 51.9 mm (from Z=0.0 to Z=111.1).\n11. Finish turn diameter Ø30.0 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02401", "images": ["images/Shaft_02401.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.6 mm and length at least 123.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.8 mm over length 27.2 mm (from Z=0.0 to Z=68.1).\n9. Finish turn diameter Ø30.0 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02492", "images": ["images/Shaft_02492.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.2 mm and length at least 72.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.2 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 14.4 mm (from Z=0.0 to Z=57.9).\n9. Finish turn diameter Ø30.6 mm over length 12.5 mm (from Z=0.0 to Z=43.5).\n10. Finish turn diameter Ø30.0 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00613", "images": ["images/Shaft_00613.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.9 mm and length at least 316.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 87.3 mm (from Z=0.0 to Z=87.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø74.8 mm over length 31.9 mm (from Z=0.0 to Z=223.9).\n10. Finish turn diameter Ø54.9 mm over length 76.9 mm (from Z=0.0 to Z=192.0).\n11. Finish turn diameter Ø43.4 mm over length 73.1 mm (from Z=0.0 to Z=115.1).\n12. Finish turn diameter Ø39.3 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03883", "images": ["images/Shaft_03883.png", "detail_png/Shaft_03883_length.png", "detail_png/Shaft_03883_diam.png", "detail_png/Shaft_03883_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.1 mm and length at least 112.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 80.5 mm (from Z=0.0 to Z=80.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00687", "images": ["images/Shaft_00687.png", "detail_png/Shaft_00687_length.png", "detail_png/Shaft_00687_diam.png", "detail_png/Shaft_00687_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.2 mm and length at least 271.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 107.4 mm (from Z=0.0 to Z=107.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.5 mm over length 58.3 mm (from Z=0.0 to Z=158.6).\n10. Finish turn diameter Ø50.9 mm over length 33.1 mm (from Z=0.0 to Z=100.3).\n11. Finish turn diameter Ø40.8 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02916", "images": ["images/Shaft_02916.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 165.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 151.8 mm (from Z=0.0 to Z=151.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.4 mm over length 8.8 mm (from Z=0.0 to Z=8.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04761", "images": ["images/Shaft_04761.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.5 mm and length at least 251.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 127.8 mm (from Z=0.0 to Z=127.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 118.7 mm (from Z=0.0 to Z=118.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04086", "images": ["images/Shaft_04086.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.3 mm and length at least 188.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 154.1 mm (from Z=0.0 to Z=154.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01418", "images": ["images/Shaft_01418.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.1 mm and length at least 65.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.4 mm over length 20.4 mm (from Z=0.0 to Z=51.0).\n9. Finish turn diameter Ø30.0 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01891", "images": ["images/Shaft_01891.png", "detail_png/Shaft_01891_length.png", "detail_png/Shaft_01891_diam.png", "detail_png/Shaft_01891_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.6 mm and length at least 74.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.2 mm over length 13.9 mm (from Z=0.0 to Z=62.3).\n9. Finish turn diameter Ø41.5 mm over length 10.9 mm (from Z=0.0 to Z=48.4).\n10. Finish turn diameter Ø32.1 mm over length 11.1 mm (from Z=0.0 to Z=37.5).\n11. Finish turn diameter Ø30.0 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04418", "images": ["images/Shaft_04418.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.6 mm and length at least 195.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.0 mm over length 63.3 mm (from Z=0.0 to Z=127.7).\n10. Finish turn diameter Ø32.7 mm over length 39.3 mm (from Z=0.0 to Z=64.4).\n11. Finish turn diameter Ø30.0 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01416", "images": ["images/Shaft_01416.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.1 mm and length at least 146.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.2 mm over length 81.3 mm (from Z=0.0 to Z=95.7).\n9. Finish turn diameter Ø48.2 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03234", "images": ["images/Shaft_03234.png", "detail_png/Shaft_03234_length.png", "detail_png/Shaft_03234_diam.png", "detail_png/Shaft_03234_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 89.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.6 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04008", "images": ["images/Shaft_04008.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 68.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.3 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02563", "images": ["images/Shaft_02563.png", "detail_png/Shaft_02563_length.png", "detail_png/Shaft_02563_diam.png", "detail_png/Shaft_02563_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.1 mm and length at least 210.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.9 mm over length 13.3 mm (from Z=0.0 to Z=175.2).\n10. Finish turn diameter Ø60.1 mm over length 55.9 mm (from Z=0.0 to Z=161.9).\n11. Finish turn diameter Ø52.3 mm over length 36.6 mm (from Z=0.0 to Z=106.0).\n12. Finish turn diameter Ø47.0 mm over length 9.9 mm (from Z=0.0 to Z=69.4).\n13. Finish turn diameter Ø42.1 mm over length 59.5 mm (from Z=0.0 to Z=59.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03312", "images": ["images/Shaft_03312.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.9 mm and length at least 99.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 9.7 mm (from Z=0.0 to Z=9.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.4 mm over length 42.1 mm (from Z=0.0 to Z=84.6).\n9. Finish turn diameter Ø53.2 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00699", "images": ["images/Shaft_00699.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.8 mm and length at least 180.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.2 mm over length 32.9 mm (from Z=0.0 to Z=134.8).\n9. Finish turn diameter Ø54.5 mm over length 43.9 mm (from Z=0.0 to Z=101.9).\n10. Finish turn diameter Ø49.4 mm over length 16.4 mm (from Z=0.0 to Z=58.0).\n11. Finish turn diameter Ø31.7 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00140", "images": ["images/Shaft_00140.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.7 mm and length at least 283.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.8 mm over length 25.8 mm (from Z=0.0 to Z=266.1).\n10. Finish turn diameter Ø67.6 mm over length 69.2 mm (from Z=0.0 to Z=240.3).\n11. Finish turn diameter Ø56.3 mm over length 72.4 mm (from Z=0.0 to Z=171.1).\n12. Finish turn diameter Ø41.6 mm over length 48.2 mm (from Z=0.0 to Z=98.7).\n13. Finish turn diameter Ø32.8 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02070", "images": ["images/Shaft_02070.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.7 mm and length at least 310.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.7 mm over length 138.8 mm (from Z=0.0 to Z=138.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.3 mm (from Z=0.0 to Z=166.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00412", "images": ["images/Shaft_00412.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.8 mm and length at least 278.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.8 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.0 mm over length 37.6 mm (from Z=0.0 to Z=257.7).\n10. Finish turn diameter Ø45.2 mm over length 60.8 mm (from Z=0.0 to Z=220.1).\n11. Finish turn diameter Ø39.6 mm over length 55.3 mm (from Z=0.0 to Z=159.3).\n12. Finish turn diameter Ø30.0 mm over length 104.0 mm (from Z=0.0 to Z=104.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04265", "images": ["images/Shaft_04265.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.8 mm and length at least 264.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 103.3 mm (from Z=0.0 to Z=103.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 156.0 mm (from Z=0.0 to Z=156.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00410", "images": ["images/Shaft_00410.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.2 mm and length at least 198.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.2 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 178.9 mm (from Z=0.0 to Z=178.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03454", "images": ["images/Shaft_03454.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.8 mm and length at least 190.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.5 mm (from Z=0.0 to Z=136.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00704", "images": ["images/Shaft_00704.png", "detail_png/Shaft_00704_length.png", "detail_png/Shaft_00704_diam.png", "detail_png/Shaft_00704_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 317.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 243.5 mm (from Z=0.0 to Z=243.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.7 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03004", "images": ["images/Shaft_03004.png", "detail_png/Shaft_03004_length.png", "detail_png/Shaft_03004_diam.png", "detail_png/Shaft_03004_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.4 mm and length at least 202.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.4 mm over length 6.7 mm (from Z=0.0 to Z=6.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.0 mm over length 50.1 mm (from Z=0.0 to Z=191.2).\n10. Finish turn diameter Ø50.4 mm over length 38.4 mm (from Z=0.0 to Z=141.1).\n11. Finish turn diameter Ø45.0 mm over length 51.0 mm (from Z=0.0 to Z=102.7).\n12. Finish turn diameter Ø31.3 mm over length 30.2 mm (from Z=0.0 to Z=51.7).\n13. Finish turn diameter Ø30.0 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01899", "images": ["images/Shaft_01899.png", "detail_png/Shaft_01899_length.png", "detail_png/Shaft_01899_diam.png", "detail_png/Shaft_01899_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.3 mm and length at least 217.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 93.9 mm (from Z=0.0 to Z=93.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 118.8 mm (from Z=0.0 to Z=118.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01758", "images": ["images/Shaft_01758.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.4 mm and length at least 65.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.4 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.6 mm over length 6.3 mm (from Z=0.0 to Z=32.0).\n9. Finish turn diameter Ø30.0 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02933", "images": ["images/Shaft_02933.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.6 mm and length at least 311.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 86.6 mm (from Z=0.0 to Z=246.4).\n10. Finish turn diameter Ø53.8 mm over length 17.0 mm (from Z=0.0 to Z=159.8).\n11. Finish turn diameter Ø36.8 mm over length 84.4 mm (from Z=0.0 to Z=142.8).\n12. Finish turn diameter Ø30.0 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03011", "images": ["images/Shaft_03011.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.9 mm and length at least 229.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 61.8 mm (from Z=0.0 to Z=61.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 163.0 mm (from Z=0.0 to Z=163.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04167", "images": ["images/Shaft_04167.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 295.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 218.7 mm (from Z=0.0 to Z=218.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02870", "images": ["images/Shaft_02870.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.2 mm and length at least 96.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.8 mm over length 35.4 mm (from Z=0.0 to Z=57.1).\n9. Finish turn diameter Ø30.0 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02275", "images": ["images/Shaft_02275.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 179.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 118.1 mm (from Z=0.0 to Z=118.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.4 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03834", "images": ["images/Shaft_03834.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.0 mm and length at least 305.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 47.9 mm (from Z=0.0 to Z=47.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 43.1 mm (from Z=0.0 to Z=252.9).\n10. Finish turn diameter Ø42.6 mm over length 56.4 mm (from Z=0.0 to Z=209.8).\n11. Finish turn diameter Ø36.9 mm over length 65.5 mm (from Z=0.0 to Z=153.4).\n12. Finish turn diameter Ø30.0 mm over length 87.9 mm (from Z=0.0 to Z=87.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00296", "images": ["images/Shaft_00296.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.3 mm and length at least 127.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 92.1 mm (from Z=0.0 to Z=92.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04551", "images": ["images/Shaft_04551.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.0 mm and length at least 91.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.2 mm over length 5.0 mm (from Z=0.0 to Z=77.3).\n9. Finish turn diameter Ø30.0 mm over length 72.3 mm (from Z=0.0 to Z=72.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04830", "images": ["images/Shaft_04830.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.9 mm and length at least 300.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 52.5 mm (from Z=0.0 to Z=52.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.8 mm over length 136.4 mm (from Z=0.0 to Z=243.0).\n10. Finish turn diameter Ø30.0 mm over length 106.6 mm (from Z=0.0 to Z=106.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02513", "images": ["images/Shaft_02513.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.8 mm and length at least 162.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 66.7 mm (from Z=0.0 to Z=125.2).\n9. Finish turn diameter Ø30.0 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01060", "images": ["images/Shaft_01060.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.7 mm and length at least 285.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 80.5 mm (from Z=0.0 to Z=80.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.8 mm over length 46.4 mm (from Z=0.0 to Z=199.6).\n10. Finish turn diameter Ø53.3 mm over length 69.1 mm (from Z=0.0 to Z=153.2).\n11. Finish turn diameter Ø40.5 mm over length 16.5 mm (from Z=0.0 to Z=84.1).\n12. Finish turn diameter Ø35.0 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02784", "images": ["images/Shaft_02784.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 174.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 125.9 mm (from Z=0.0 to Z=125.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.8 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03999", "images": ["images/Shaft_03999.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.8 mm and length at least 278.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 88.5 mm (from Z=0.0 to Z=88.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 117.0 mm (from Z=0.0 to Z=184.5).\n10. Finish turn diameter Ø47.1 mm over length 51.7 mm (from Z=0.0 to Z=67.5).\n11. Finish turn diameter Ø30.1 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04705", "images": ["images/Shaft_04705.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.6 mm and length at least 90.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.8 mm over length 20.6 mm (from Z=0.0 to Z=35.3).\n9. Finish turn diameter Ø45.7 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00702", "images": ["images/Shaft_00702.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.0 mm and length at least 223.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.0 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.6 mm over length 147.2 mm (from Z=0.0 to Z=177.7).\n10. Finish turn diameter Ø30.0 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02373", "images": ["images/Shaft_02373.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.8 mm and length at least 192.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.1 mm over length 43.5 mm (from Z=0.0 to Z=166.4).\n9. Finish turn diameter Ø61.5 mm over length 32.1 mm (from Z=0.0 to Z=122.9).\n10. Finish turn diameter Ø51.8 mm over length 42.8 mm (from Z=0.0 to Z=90.8).\n11. Finish turn diameter Ø37.2 mm over length 15.5 mm (from Z=0.0 to Z=48.0).\n12. Finish turn diameter Ø30.0 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00632", "images": ["images/Shaft_00632.png", "detail_png/Shaft_00632_length.png", "detail_png/Shaft_00632_diam.png", "detail_png/Shaft_00632_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.9 mm and length at least 315.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 144.1 mm (from Z=0.0 to Z=144.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.8 mm (from Z=0.0 to Z=166.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02493", "images": ["images/Shaft_02493.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.2 mm and length at least 191.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.2 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.0 mm over length 32.4 mm (from Z=0.0 to Z=159.1).\n10. Finish turn diameter Ø30.0 mm over length 126.7 mm (from Z=0.0 to Z=126.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00301", "images": ["images/Shaft_00301.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.0 mm and length at least 169.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.1 mm over length 22.8 mm (from Z=0.0 to Z=117.4).\n10. Finish turn diameter Ø30.0 mm over length 94.6 mm (from Z=0.0 to Z=94.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00298", "images": ["images/Shaft_00298.png", "detail_png/Shaft_00298_length.png", "detail_png/Shaft_00298_diam.png", "detail_png/Shaft_00298_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.8 mm and length at least 208.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.8 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 14.1 mm (from Z=0.0 to Z=173.4).\n10. Finish turn diameter Ø30.0 mm over length 159.3 mm (from Z=0.0 to Z=159.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03835", "images": ["images/Shaft_03835.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.9 mm and length at least 101.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.9 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.2 mm over length 33.9 mm (from Z=0.0 to Z=89.2).\n9. Finish turn diameter Ø30.0 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01108", "images": ["images/Shaft_01108.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.4 mm and length at least 228.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 156.0 mm (from Z=0.0 to Z=156.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01195", "images": ["images/Shaft_01195.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.0 mm and length at least 137.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.1 mm over length 52.4 mm (from Z=0.0 to Z=115.2).\n9. Finish turn diameter Ø33.8 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00637", "images": ["images/Shaft_00637.png", "detail_png/Shaft_00637_length.png", "detail_png/Shaft_00637_diam.png", "detail_png/Shaft_00637_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.7 mm and length at least 119.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 86.8 mm (from Z=0.0 to Z=86.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00732", "images": ["images/Shaft_00732.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.3 mm and length at least 172.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.6 mm over length 39.3 mm (from Z=0.0 to Z=119.2).\n9. Finish turn diameter Ø34.7 mm over length 64.6 mm (from Z=0.0 to Z=79.9).\n10. Finish turn diameter Ø30.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01544", "images": ["images/Shaft_01544.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.8 mm and length at least 187.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 85.6 mm (from Z=0.0 to Z=85.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.0 mm over length 26.5 mm (from Z=0.0 to Z=96.9).\n9. Finish turn diameter Ø52.7 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01334", "images": ["images/Shaft_01334.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.5 mm and length at least 99.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03170", "images": ["images/Shaft_03170.png", "detail_png/Shaft_03170_length.png", "detail_png/Shaft_03170_diam.png", "detail_png/Shaft_03170_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.4 mm and length at least 192.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.4 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 10.7 mm (from Z=0.0 to Z=153.6).\n9. Finish turn diameter Ø33.3 mm over length 61.9 mm (from Z=0.0 to Z=142.9).\n10. Finish turn diameter Ø30.0 mm over length 81.0 mm (from Z=0.0 to Z=81.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03456", "images": ["images/Shaft_03456.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.0 mm and length at least 200.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.2 mm over length 28.0 mm (from Z=0.0 to Z=139.3).\n10. Finish turn diameter Ø46.0 mm over length 81.8 mm (from Z=0.0 to Z=111.3).\n11. Finish turn diameter Ø35.1 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01197", "images": ["images/Shaft_01197.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 176.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 127.0 mm (from Z=0.0 to Z=127.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.4 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04747", "images": ["images/Shaft_04747.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.8 mm and length at least 264.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.5 mm over length 164.2 mm (from Z=0.0 to Z=195.6).\n10. Finish turn diameter Ø30.0 mm over length 31.4 mm (from Z=0.0 to Z=31.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03518", "images": ["images/Shaft_03518.png", "detail_png/Shaft_03518_length.png", "detail_png/Shaft_03518_diam.png", "detail_png/Shaft_03518_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.1 mm and length at least 223.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.5 mm over length 79.7 mm (from Z=0.0 to Z=132.0).\n10. Finish turn diameter Ø30.0 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00123", "images": ["images/Shaft_00123.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.7 mm and length at least 77.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.7 mm over length 10.9 mm (from Z=0.0 to Z=59.5).\n9. Finish turn diameter Ø52.6 mm over length 17.8 mm (from Z=0.0 to Z=48.6).\n10. Finish turn diameter Ø35.9 mm over length 10.7 mm (from Z=0.0 to Z=30.8).\n11. Finish turn diameter Ø32.4 mm over length 5.0 mm (from Z=0.0 to Z=20.1).\n12. Finish turn diameter Ø30.0 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04073", "images": ["images/Shaft_04073.png", "detail_png/Shaft_04073_length.png", "detail_png/Shaft_04073_diam.png", "detail_png/Shaft_04073_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.3 mm and length at least 128.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.4 mm over length 34.8 mm (from Z=0.0 to Z=58.7).\n9. Finish turn diameter Ø33.9 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01910", "images": ["images/Shaft_01910.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.4 mm and length at least 247.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.4 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.6 mm over length 29.1 mm (from Z=0.0 to Z=183.4).\n10. Finish turn diameter Ø30.2 mm over length 58.5 mm (from Z=0.0 to Z=154.3).\n11. Finish turn diameter Ø30.0 mm over length 95.8 mm (from Z=0.0 to Z=95.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00281", "images": ["images/Shaft_00281.png", "detail_png/Shaft_00281_length.png", "detail_png/Shaft_00281_diam.png", "detail_png/Shaft_00281_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.5 mm and length at least 250.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.4 mm over length 107.2 mm (from Z=0.0 to Z=232.5).\n10. Finish turn diameter Ø34.5 mm over length 106.2 mm (from Z=0.0 to Z=125.3).\n11. Finish turn diameter Ø30.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03984", "images": ["images/Shaft_03984.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.8 mm and length at least 245.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 87.0 mm (from Z=0.0 to Z=87.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.6 mm over length 11.2 mm (from Z=0.0 to Z=153.2).\n10. Finish turn diameter Ø30.7 mm over length 59.6 mm (from Z=0.0 to Z=142.0).\n11. Finish turn diameter Ø30.0 mm over length 82.4 mm (from Z=0.0 to Z=82.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03208", "images": ["images/Shaft_03208.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.9 mm and length at least 237.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.0 mm over length 22.7 mm (from Z=0.0 to Z=184.2).\n10. Finish turn diameter Ø30.0 mm over length 161.5 mm (from Z=0.0 to Z=161.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04739", "images": ["images/Shaft_04739.png", "detail_png/Shaft_04739_length.png", "detail_png/Shaft_04739_diam.png", "detail_png/Shaft_04739_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 212.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 133.0 mm (from Z=0.0 to Z=133.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03159", "images": ["images/Shaft_03159.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.5 mm and length at least 232.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 29.6 mm (from Z=0.0 to Z=175.3).\n10. Finish turn diameter Ø30.0 mm over length 145.7 mm (from Z=0.0 to Z=145.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04789", "images": ["images/Shaft_04789.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.8 mm and length at least 212.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 81.5 mm (from Z=0.0 to Z=81.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.5 mm (from Z=0.0 to Z=125.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00985", "images": ["images/Shaft_00985.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.8 mm and length at least 291.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.8 mm over length 62.9 mm (from Z=0.0 to Z=62.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.2 mm over length 76.4 mm (from Z=0.0 to Z=223.8).\n10. Finish turn diameter Ø40.5 mm over length 117.1 mm (from Z=0.0 to Z=147.4).\n11. Finish turn diameter Ø30.0 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02082", "images": ["images/Shaft_02082.png", "detail_png/Shaft_02082_length.png", "detail_png/Shaft_02082_diam.png", "detail_png/Shaft_02082_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.8 mm and length at least 243.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.3 mm over length 75.4 mm (from Z=0.0 to Z=193.7).\n10. Finish turn diameter Ø38.4 mm over length 23.6 mm (from Z=0.0 to Z=118.3).\n11. Finish turn diameter Ø30.0 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00727", "images": ["images/Shaft_00727.png", "detail_png/Shaft_00727_length.png", "detail_png/Shaft_00727_diam.png", "detail_png/Shaft_00727_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.7 mm and length at least 250.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 146.5 mm (from Z=0.0 to Z=146.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.0 mm over length 59.0 mm (from Z=0.0 to Z=99.4).\n10. Finish turn diameter Ø55.0 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00524", "images": ["images/Shaft_00524.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.8 mm and length at least 146.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.8 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.5 mm over length 12.3 mm (from Z=0.0 to Z=99.2).\n9. Finish turn diameter Ø55.5 mm over length 21.6 mm (from Z=0.0 to Z=86.9).\n10. Finish turn diameter Ø36.5 mm over length 31.8 mm (from Z=0.0 to Z=65.3).\n11. Finish turn diameter Ø30.0 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04227", "images": ["images/Shaft_04227.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.9 mm and length at least 164.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.9 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.4 mm over length 68.7 mm (from Z=0.0 to Z=105.3).\n9. Finish turn diameter Ø37.7 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03179", "images": ["images/Shaft_03179.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 213.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.2 mm (from Z=0.0 to Z=146.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.1 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00258", "images": ["images/Shaft_00258.png", "detail_png/Shaft_00258_length.png", "detail_png/Shaft_00258_diam.png", "detail_png/Shaft_00258_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.0 mm and length at least 91.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.0 mm over length 10.2 mm (from Z=0.0 to Z=68.7).\n9. Finish turn diameter Ø42.9 mm over length 6.3 mm (from Z=0.0 to Z=58.5).\n10. Finish turn diameter Ø33.8 mm over length 14.7 mm (from Z=0.0 to Z=52.2).\n11. Finish turn diameter Ø30.0 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04886", "images": ["images/Shaft_04886.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.0 mm and length at least 244.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.0 mm over length 73.1 mm (from Z=0.0 to Z=73.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 9.2 mm (from Z=0.0 to Z=166.2).\n10. Finish turn diameter Ø30.0 mm over length 157.0 mm (from Z=0.0 to Z=157.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02827", "images": ["images/Shaft_02827.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.5 mm and length at least 156.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01907", "images": ["images/Shaft_01907.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.9 mm and length at least 115.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.8 mm over length 26.2 mm (from Z=0.0 to Z=86.3).\n9. Finish turn diameter Ø30.0 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03083", "images": ["images/Shaft_03083.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.8 mm and length at least 238.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 83.2 mm (from Z=0.0 to Z=83.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 52.9 mm (from Z=0.0 to Z=150.6).\n10. Finish turn diameter Ø30.0 mm over length 97.7 mm (from Z=0.0 to Z=97.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01214", "images": ["images/Shaft_01214.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.6 mm and length at least 264.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 72.2 mm (from Z=0.0 to Z=72.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.1 mm over length 51.8 mm (from Z=0.0 to Z=187.1).\n10. Finish turn diameter Ø50.7 mm over length 135.3 mm (from Z=0.0 to Z=135.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03031", "images": ["images/Shaft_03031.png", "detail_png/Shaft_03031_length.png", "detail_png/Shaft_03031_diam.png", "detail_png/Shaft_03031_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.2 mm and length at least 120.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.2 mm over length 28.4 mm (from Z=0.0 to Z=91.5).\n9. Finish turn diameter Ø51.1 mm over length 16.9 mm (from Z=0.0 to Z=63.1).\n10. Finish turn diameter Ø36.5 mm over length 19.6 mm (from Z=0.0 to Z=46.2).\n11. Finish turn diameter Ø30.0 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03898", "images": ["images/Shaft_03898.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.2 mm and length at least 136.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.1 mm over length 41.4 mm (from Z=0.0 to Z=94.2).\n9. Finish turn diameter Ø44.5 mm over length 17.5 mm (from Z=0.0 to Z=52.8).\n10. Finish turn diameter Ø41.4 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03330", "images": ["images/Shaft_03330.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.5 mm and length at least 127.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 49.5 mm (from Z=0.0 to Z=49.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.3 mm (from Z=0.0 to Z=73.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00025", "images": ["images/Shaft_00025.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.3 mm and length at least 109.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00210", "images": ["images/Shaft_00210.png", "detail_png/Shaft_00210_length.png", "detail_png/Shaft_00210_diam.png", "detail_png/Shaft_00210_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.8 mm and length at least 96.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.8 mm over length 12.6 mm (from Z=0.0 to Z=12.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.1 mm over length 7.8 mm (from Z=0.0 to Z=78.5).\n9. Finish turn diameter Ø42.1 mm over length 26.4 mm (from Z=0.0 to Z=70.7).\n10. Finish turn diameter Ø32.5 mm over length 20.2 mm (from Z=0.0 to Z=44.3).\n11. Finish turn diameter Ø30.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00221", "images": ["images/Shaft_00221.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.2 mm and length at least 291.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.1 mm over length 17.2 mm (from Z=0.0 to Z=245.2).\n10. Finish turn diameter Ø36.5 mm over length 77.6 mm (from Z=0.0 to Z=228.0).\n11. Finish turn diameter Ø30.0 mm over length 150.4 mm (from Z=0.0 to Z=150.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03414", "images": ["images/Shaft_03414.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.1 mm and length at least 89.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.1 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.3 mm over length 11.2 mm (from Z=0.0 to Z=69.6).\n9. Finish turn diameter Ø57.1 mm over length 27.3 mm (from Z=0.0 to Z=58.4).\n10. Finish turn diameter Ø51.0 mm over length 24.5 mm (from Z=0.0 to Z=31.1).\n11. Finish turn diameter Ø44.4 mm over length 6.6 mm (from Z=0.0 to Z=6.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01203", "images": ["images/Shaft_01203.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.4 mm and length at least 78.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03373", "images": ["images/Shaft_03373.png", "detail_png/Shaft_03373_length.png", "detail_png/Shaft_03373_diam.png", "detail_png/Shaft_03373_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.9 mm and length at least 141.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.6 mm over length 29.3 mm (from Z=0.0 to Z=75.1).\n9. Finish turn diameter Ø30.0 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04395", "images": ["images/Shaft_04395.png", "detail_png/Shaft_04395_length.png", "detail_png/Shaft_04395_diam.png", "detail_png/Shaft_04395_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.4 mm and length at least 254.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.4 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.6 mm over length 9.0 mm (from Z=0.0 to Z=238.5).\n10. Finish turn diameter Ø58.2 mm over length 71.5 mm (from Z=0.0 to Z=229.5).\n11. Finish turn diameter Ø40.6 mm over length 72.3 mm (from Z=0.0 to Z=158.0).\n12. Finish turn diameter Ø37.1 mm over length 67.0 mm (from Z=0.0 to Z=85.7).\n13. Finish turn diameter Ø30.0 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03219", "images": ["images/Shaft_03219.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.1 mm and length at least 254.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.1 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.6 mm over length 110.3 mm (from Z=0.0 to Z=230.0).\n10. Finish turn diameter Ø45.4 mm over length 119.7 mm (from Z=0.0 to Z=119.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00053", "images": ["images/Shaft_00053.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.7 mm and length at least 141.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.0 mm over length 60.3 mm (from Z=0.0 to Z=112.5).\n9. Finish turn diameter Ø53.6 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03349", "images": ["images/Shaft_03349.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 143.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 94.9 mm (from Z=0.0 to Z=94.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02239", "images": ["images/Shaft_02239.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.0 mm and length at least 253.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.0 mm over length 47.9 mm (from Z=0.0 to Z=47.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.3 mm (from Z=0.0 to Z=200.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01333", "images": ["images/Shaft_01333.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.4 mm and length at least 162.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.4 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.4 mm over length 12.0 mm (from Z=0.0 to Z=115.9).\n9. Finish turn diameter Ø50.9 mm over length 46.2 mm (from Z=0.0 to Z=103.9).\n10. Finish turn diameter Ø39.8 mm over length 10.8 mm (from Z=0.0 to Z=57.7).\n11. Finish turn diameter Ø31.1 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02856", "images": ["images/Shaft_02856.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.3 mm and length at least 215.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 54.2 mm (from Z=0.0 to Z=193.7).\n10. Finish turn diameter Ø56.3 mm over length 67.4 mm (from Z=0.0 to Z=139.5).\n11. Finish turn diameter Ø50.7 mm over length 10.1 mm (from Z=0.0 to Z=72.1).\n12. Finish turn diameter Ø40.9 mm over length 15.2 mm (from Z=0.0 to Z=62.0).\n13. Finish turn diameter Ø30.5 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04396", "images": ["images/Shaft_04396.png", "detail_png/Shaft_04396_length.png", "detail_png/Shaft_04396_diam.png", "detail_png/Shaft_04396_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.1 mm and length at least 72.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.5 mm over length 14.8 mm (from Z=0.0 to Z=41.4).\n9. Finish turn diameter Ø52.3 mm over length 12.5 mm (from Z=0.0 to Z=26.6).\n10. Finish turn diameter Ø48.5 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01890", "images": ["images/Shaft_01890.png", "detail_png/Shaft_01890_length.png", "detail_png/Shaft_01890_diam.png", "detail_png/Shaft_01890_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.1 mm and length at least 73.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.1 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.4 mm over length 8.1 mm (from Z=0.0 to Z=38.3).\n9. Finish turn diameter Ø42.5 mm over length 5.0 mm (from Z=0.0 to Z=30.2).\n10. Finish turn diameter Ø32.0 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04613", "images": ["images/Shaft_04613.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.8 mm and length at least 99.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 17.7 mm (from Z=0.0 to Z=73.3).\n9. Finish turn diameter Ø36.8 mm over length 46.7 mm (from Z=0.0 to Z=55.6).\n10. Finish turn diameter Ø30.4 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04556", "images": ["images/Shaft_04556.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.8 mm and length at least 114.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.7 mm over length 40.9 mm (from Z=0.0 to Z=61.2).\n9. Finish turn diameter Ø37.0 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03920", "images": ["images/Shaft_03920.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.7 mm and length at least 249.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.7 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 187.6 mm (from Z=0.0 to Z=187.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04611", "images": ["images/Shaft_04611.png", "detail_png/Shaft_04611_length.png", "detail_png/Shaft_04611_diam.png", "detail_png/Shaft_04611_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.5 mm and length at least 175.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.9 mm over length 30.4 mm (from Z=0.0 to Z=160.2).\n9. Finish turn diameter Ø51.3 mm over length 74.1 mm (from Z=0.0 to Z=129.8).\n10. Finish turn diameter Ø41.1 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04970", "images": ["images/Shaft_04970.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.2 mm and length at least 268.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.1 mm over length 26.1 mm (from Z=0.0 to Z=227.1).\n10. Finish turn diameter Ø57.0 mm over length 69.0 mm (from Z=0.0 to Z=201.0).\n11. Finish turn diameter Ø51.6 mm over length 19.9 mm (from Z=0.0 to Z=132.0).\n12. Finish turn diameter Ø35.0 mm over length 84.6 mm (from Z=0.0 to Z=112.1).\n13. Finish turn diameter Ø30.0 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03162", "images": ["images/Shaft_03162.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.0 mm and length at least 272.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 178.8 mm (from Z=0.0 to Z=178.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 67.1 mm (from Z=0.0 to Z=88.7).\n10. Finish turn diameter Ø34.9 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02477", "images": ["images/Shaft_02477.png", "detail_png/Shaft_02477_length.png", "detail_png/Shaft_02477_diam.png", "detail_png/Shaft_02477_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 283.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 185.3 mm (from Z=0.0 to Z=185.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.5 mm over length 92.7 mm (from Z=0.0 to Z=92.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02963", "images": ["images/Shaft_02963.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.2 mm and length at least 205.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.1 mm over length 11.5 mm (from Z=0.0 to Z=175.6).\n10. Finish turn diameter Ø30.0 mm over length 164.1 mm (from Z=0.0 to Z=164.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03515", "images": ["images/Shaft_03515.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 242.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 183.0 mm (from Z=0.0 to Z=183.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.5 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02011", "images": ["images/Shaft_02011.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.7 mm and length at least 203.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.7 mm over length 14.5 mm (from Z=0.0 to Z=14.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.2 mm over length 35.5 mm (from Z=0.0 to Z=184.2).\n10. Finish turn diameter Ø39.2 mm over length 15.4 mm (from Z=0.0 to Z=148.7).\n11. Finish turn diameter Ø30.0 mm over length 133.3 mm (from Z=0.0 to Z=133.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01612", "images": ["images/Shaft_01612.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.9 mm and length at least 162.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.7 mm over length 32.7 mm (from Z=0.0 to Z=139.6).\n9. Finish turn diameter Ø52.4 mm over length 38.7 mm (from Z=0.0 to Z=106.9).\n10. Finish turn diameter Ø41.5 mm over length 52.9 mm (from Z=0.0 to Z=68.2).\n11. Finish turn diameter Ø30.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01227", "images": ["images/Shaft_01227.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.9 mm and length at least 216.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø74.0 mm over length 47.2 mm (from Z=0.0 to Z=177.0).\n10. Finish turn diameter Ø66.7 mm over length 47.9 mm (from Z=0.0 to Z=129.8).\n11. Finish turn diameter Ø57.5 mm over length 38.0 mm (from Z=0.0 to Z=81.9).\n12. Finish turn diameter Ø52.6 mm over length 28.0 mm (from Z=0.0 to Z=43.9).\n13. Finish turn diameter Ø42.9 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02788", "images": ["images/Shaft_02788.png", "detail_png/Shaft_02788_length.png", "detail_png/Shaft_02788_diam.png", "detail_png/Shaft_02788_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.1 mm and length at least 192.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 6.6 mm (from Z=0.0 to Z=6.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 180.6 mm (from Z=0.0 to Z=180.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04200", "images": ["images/Shaft_04200.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.9 mm and length at least 124.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 29.3 mm (from Z=0.0 to Z=89.2).\n9. Finish turn diameter Ø39.0 mm over length 24.6 mm (from Z=0.0 to Z=59.9).\n10. Finish turn diameter Ø34.0 mm over length 16.2 mm (from Z=0.0 to Z=35.3).\n11. Finish turn diameter Ø30.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02451", "images": ["images/Shaft_02451.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.7 mm and length at least 203.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.7 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.9 mm over length 61.4 mm (from Z=0.0 to Z=142.6).\n10. Finish turn diameter Ø30.0 mm over length 81.2 mm (from Z=0.0 to Z=81.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01540", "images": ["images/Shaft_01540.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.7 mm and length at least 69.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.8 mm over length 5.2 mm (from Z=0.0 to Z=52.2).\n9. Finish turn diameter Ø34.3 mm over length 13.2 mm (from Z=0.0 to Z=47.0).\n10. Finish turn diameter Ø30.0 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01264", "images": ["images/Shaft_01264.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.7 mm and length at least 174.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.2 mm over length 41.1 mm (from Z=0.0 to Z=129.9).\n9. Finish turn diameter Ø60.4 mm over length 41.0 mm (from Z=0.0 to Z=88.8).\n10. Finish turn diameter Ø44.7 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04986", "images": ["images/Shaft_04986.png", "detail_png/Shaft_04986_length.png", "detail_png/Shaft_04986_diam.png", "detail_png/Shaft_04986_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.3 mm and length at least 233.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.1 mm (from Z=0.0 to Z=204.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00822", "images": ["images/Shaft_00822.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.0 mm and length at least 217.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 82.1 mm (from Z=0.0 to Z=82.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 35.9 mm (from Z=0.0 to Z=129.9).\n10. Finish turn diameter Ø33.9 mm over length 60.3 mm (from Z=0.0 to Z=94.0).\n11. Finish turn diameter Ø30.0 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03035", "images": ["images/Shaft_03035.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.7 mm and length at least 165.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02309", "images": ["images/Shaft_02309.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 71.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03443", "images": ["images/Shaft_03443.png", "detail_png/Shaft_03443_length.png", "detail_png/Shaft_03443_diam.png", "detail_png/Shaft_03443_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.0 mm and length at least 133.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.0 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01967", "images": ["images/Shaft_01967.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 82.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.2 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02384", "images": ["images/Shaft_02384.png", "detail_png/Shaft_02384_length.png", "detail_png/Shaft_02384_diam.png", "detail_png/Shaft_02384_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.8 mm and length at least 279.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 103.4 mm (from Z=0.0 to Z=103.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.8 mm over length 98.3 mm (from Z=0.0 to Z=170.8).\n10. Finish turn diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02259", "images": ["images/Shaft_02259.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.7 mm and length at least 83.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.7 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.5 mm over length 17.3 mm (from Z=0.0 to Z=57.6).\n9. Finish turn diameter Ø30.0 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04657", "images": ["images/Shaft_04657.png", "detail_png/Shaft_04657_length.png", "detail_png/Shaft_04657_diam.png", "detail_png/Shaft_04657_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.2 mm and length at least 259.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.4 mm over length 47.0 mm (from Z=0.0 to Z=211.0).\n10. Finish turn diameter Ø30.0 mm over length 164.0 mm (from Z=0.0 to Z=164.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02588", "images": ["images/Shaft_02588.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.8 mm and length at least 312.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 119.8 mm (from Z=0.0 to Z=119.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.7 mm over length 56.6 mm (from Z=0.0 to Z=187.2).\n10. Finish turn diameter Ø30.0 mm over length 130.6 mm (from Z=0.0 to Z=130.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03380", "images": ["images/Shaft_03380.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.0 mm and length at least 246.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.7 mm (from Z=0.0 to Z=191.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03203", "images": ["images/Shaft_03203.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.4 mm and length at least 189.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 64.4 mm (from Z=0.0 to Z=64.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.6 mm (from Z=0.0 to Z=119.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01909", "images": ["images/Shaft_01909.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 310.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 257.3 mm (from Z=0.0 to Z=257.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.8 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01250", "images": ["images/Shaft_01250.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.6 mm and length at least 199.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.0 mm over length 111.9 mm (from Z=0.0 to Z=160.3).\n10. Finish turn diameter Ø31.5 mm over length 21.0 mm (from Z=0.0 to Z=48.4).\n11. Finish turn diameter Ø30.0 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00617", "images": ["images/Shaft_00617.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.0 mm and length at least 299.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.9 mm over length 84.9 mm (from Z=0.0 to Z=259.9).\n10. Finish turn diameter Ø32.6 mm over length 24.3 mm (from Z=0.0 to Z=175.0).\n11. Finish turn diameter Ø30.0 mm over length 150.7 mm (from Z=0.0 to Z=150.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03007", "images": ["images/Shaft_03007.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.1 mm and length at least 156.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.2 mm over length 15.5 mm (from Z=0.0 to Z=109.2).\n9. Finish turn diameter Ø44.9 mm over length 21.6 mm (from Z=0.0 to Z=93.7).\n10. Finish turn diameter Ø30.0 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03692", "images": ["images/Shaft_03692.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.8 mm and length at least 75.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.3 mm over length 22.9 mm (from Z=0.0 to Z=41.1).\n9. Finish turn diameter Ø30.0 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04466", "images": ["images/Shaft_04466.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 85.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.6 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02657", "images": ["images/Shaft_02657.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.2 mm and length at least 238.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.5 mm over length 57.8 mm (from Z=0.0 to Z=195.3).\n10. Finish turn diameter Ø30.0 mm over length 137.5 mm (from Z=0.0 to Z=137.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00261", "images": ["images/Shaft_00261.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.5 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 31.9 mm (from Z=0.0 to Z=94.6).\n9. Finish turn diameter Ø30.4 mm over length 55.4 mm (from Z=0.0 to Z=62.7).\n10. Finish turn diameter Ø30.0 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01989", "images": ["images/Shaft_01989.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.9 mm and length at least 294.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 80.8 mm (from Z=0.0 to Z=80.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.0 mm over length 118.7 mm (from Z=0.0 to Z=208.2).\n10. Finish turn diameter Ø43.1 mm over length 89.5 mm (from Z=0.0 to Z=89.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01999", "images": ["images/Shaft_01999.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.9 mm and length at least 198.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.3 mm over length 36.3 mm (from Z=0.0 to Z=122.0).\n10. Finish turn diameter Ø54.6 mm over length 85.7 mm (from Z=0.0 to Z=85.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02946", "images": ["images/Shaft_02946.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.2 mm and length at least 264.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.0 mm over length 39.2 mm (from Z=0.0 to Z=250.1).\n10. Finish turn diameter Ø30.0 mm over length 210.9 mm (from Z=0.0 to Z=210.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02574", "images": ["images/Shaft_02574.png", "detail_png/Shaft_02574_length.png", "detail_png/Shaft_02574_diam.png", "detail_png/Shaft_02574_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 247.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 183.8 mm (from Z=0.0 to Z=183.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01822", "images": ["images/Shaft_01822.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 266.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 176.9 mm (from Z=0.0 to Z=176.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.0 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00641", "images": ["images/Shaft_00641.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.4 mm and length at least 130.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.7 mm (from Z=0.0 to Z=102.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00772", "images": ["images/Shaft_00772.png", "detail_png/Shaft_00772_length.png", "detail_png/Shaft_00772_diam.png", "detail_png/Shaft_00772_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 317.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 188.2 mm (from Z=0.0 to Z=188.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.8 mm over length 124.1 mm (from Z=0.0 to Z=124.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00068", "images": ["images/Shaft_00068.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 284.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 235.4 mm (from Z=0.0 to Z=235.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.1 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01877", "images": ["images/Shaft_01877.png", "detail_png/Shaft_01877_length.png", "detail_png/Shaft_01877_diam.png", "detail_png/Shaft_01877_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.0 mm and length at least 110.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.0 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04847", "images": ["images/Shaft_04847.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.2 mm and length at least 184.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.9 mm over length 42.1 mm (from Z=0.0 to Z=156.3).\n9. Finish turn diameter Ø51.8 mm over length 35.2 mm (from Z=0.0 to Z=114.2).\n10. Finish turn diameter Ø32.4 mm over length 24.0 mm (from Z=0.0 to Z=79.0).\n11. Finish turn diameter Ø30.0 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00175", "images": ["images/Shaft_00175.png", "detail_png/Shaft_00175_length.png", "detail_png/Shaft_00175_diam.png", "detail_png/Shaft_00175_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.7 mm and length at least 133.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.4 mm (from Z=0.0 to Z=81.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04695", "images": ["images/Shaft_04695.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.7 mm and length at least 164.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.7 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.7 mm over length 35.4 mm (from Z=0.0 to Z=131.7).\n10. Finish turn diameter Ø30.0 mm over length 96.3 mm (from Z=0.0 to Z=96.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04487", "images": ["images/Shaft_04487.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.1 mm and length at least 260.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.0 mm over length 31.5 mm (from Z=0.0 to Z=184.2).\n10. Finish turn diameter Ø30.0 mm over length 152.7 mm (from Z=0.0 to Z=152.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00914", "images": ["images/Shaft_00914.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 69.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.9 mm over length 6.0 mm (from Z=0.0 to Z=6.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02515", "images": ["images/Shaft_02515.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.4 mm and length at least 151.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.9 mm over length 34.8 mm (from Z=0.0 to Z=130.1).\n9. Finish turn diameter Ø44.6 mm over length 34.4 mm (from Z=0.0 to Z=95.3).\n10. Finish turn diameter Ø30.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02340", "images": ["images/Shaft_02340.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 241.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 214.9 mm (from Z=0.0 to Z=214.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02183", "images": ["images/Shaft_02183.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 186.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.9 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04697", "images": ["images/Shaft_04697.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.3 mm and length at least 285.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.3 mm over length 109.6 mm (from Z=0.0 to Z=109.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.3 mm over length 65.3 mm (from Z=0.0 to Z=170.7).\n10. Finish turn diameter Ø55.5 mm over length 105.4 mm (from Z=0.0 to Z=105.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04273", "images": ["images/Shaft_04273.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 135.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 116.9 mm (from Z=0.0 to Z=116.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.4 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04692", "images": ["images/Shaft_04692.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.4 mm and length at least 206.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.3 mm over length 65.6 mm (from Z=0.0 to Z=139.1).\n10. Finish turn diameter Ø51.3 mm over length 44.5 mm (from Z=0.0 to Z=73.5).\n11. Finish turn diameter Ø33.2 mm over length 19.5 mm (from Z=0.0 to Z=29.0).\n12. Finish turn diameter Ø30.0 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01588", "images": ["images/Shaft_01588.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.5 mm and length at least 112.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.5 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.5 mm over length 24.3 mm (from Z=0.0 to Z=90.3).\n9. Finish turn diameter Ø30.0 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00149", "images": ["images/Shaft_00149.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.7 mm and length at least 172.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.3 mm over length 57.5 mm (from Z=0.0 to Z=104.8).\n9. Finish turn diameter Ø58.6 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00484", "images": ["images/Shaft_00484.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.8 mm and length at least 91.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 30.0 mm (from Z=0.0 to Z=61.7).\n9. Finish turn diameter Ø45.3 mm over length 9.1 mm (from Z=0.0 to Z=31.7).\n10. Finish turn diameter Ø42.0 mm over length 10.6 mm (from Z=0.0 to Z=22.6).\n11. Finish turn diameter Ø35.9 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01626", "images": ["images/Shaft_01626.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.1 mm and length at least 109.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.0 mm over length 39.5 mm (from Z=0.0 to Z=63.1).\n9. Finish turn diameter Ø30.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04040", "images": ["images/Shaft_04040.png", "detail_png/Shaft_04040_length.png", "detail_png/Shaft_04040_diam.png", "detail_png/Shaft_04040_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.3 mm and length at least 249.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 128.7 mm (from Z=0.0 to Z=128.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.3 mm over length 41.9 mm (from Z=0.0 to Z=116.1).\n10. Finish turn diameter Ø30.0 mm over length 74.2 mm (from Z=0.0 to Z=74.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00683", "images": ["images/Shaft_00683.png", "detail_png/Shaft_00683_length.png", "detail_png/Shaft_00683_diam.png", "detail_png/Shaft_00683_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.7 mm and length at least 141.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.7 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 96.0 mm (from Z=0.0 to Z=96.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01682", "images": ["images/Shaft_01682.png", "detail_png/Shaft_01682_length.png", "detail_png/Shaft_01682_diam.png", "detail_png/Shaft_01682_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.1 mm and length at least 79.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.6 mm over length 16.6 mm (from Z=0.0 to Z=45.1).\n9. Finish turn diameter Ø66.1 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04560", "images": ["images/Shaft_04560.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.1 mm and length at least 196.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.6 mm (from Z=0.0 to Z=177.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03453", "images": ["images/Shaft_03453.png", "detail_png/Shaft_03453_length.png", "detail_png/Shaft_03453_diam.png", "detail_png/Shaft_03453_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.1 mm and length at least 109.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.1 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.0 mm over length 26.4 mm (from Z=0.0 to Z=88.5).\n9. Finish turn diameter Ø30.0 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00697", "images": ["images/Shaft_00697.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.9 mm and length at least 175.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 36.2 mm (from Z=0.0 to Z=117.9).\n9. Finish turn diameter Ø47.3 mm over length 20.6 mm (from Z=0.0 to Z=81.7).\n10. Finish turn diameter Ø30.0 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03559", "images": ["images/Shaft_03559.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.1 mm and length at least 98.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.4 mm over length 9.9 mm (from Z=0.0 to Z=74.5).\n9. Finish turn diameter Ø30.0 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00969", "images": ["images/Shaft_00969.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.9 mm and length at least 275.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 124.6 mm (from Z=0.0 to Z=124.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 23.6 mm (from Z=0.0 to Z=145.5).\n10. Finish turn diameter Ø59.0 mm over length 121.9 mm (from Z=0.0 to Z=121.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00220", "images": ["images/Shaft_00220.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 281.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 71.7 mm (from Z=0.0 to Z=71.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 205.0 mm (from Z=0.0 to Z=205.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02798", "images": ["images/Shaft_02798.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.4 mm and length at least 169.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 30.4 mm (from Z=0.0 to Z=114.3).\n9. Finish turn diameter Ø39.9 mm over length 83.9 mm (from Z=0.0 to Z=83.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02601", "images": ["images/Shaft_02601.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.1 mm and length at least 68.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01721", "images": ["images/Shaft_01721.png", "detail_png/Shaft_01721_length.png", "detail_png/Shaft_01721_diam.png", "detail_png/Shaft_01721_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.2 mm and length at least 296.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 122.7 mm (from Z=0.0 to Z=122.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.0 mm (from Z=0.0 to Z=169.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03782", "images": ["images/Shaft_03782.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.0 mm and length at least 311.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 287.0 mm (from Z=0.0 to Z=287.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01919", "images": ["images/Shaft_01919.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.4 mm and length at least 310.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 89.4 mm (from Z=0.0 to Z=294.3).\n10. Finish turn diameter Ø52.3 mm over length 85.3 mm (from Z=0.0 to Z=204.9).\n11. Finish turn diameter Ø37.9 mm over length 67.7 mm (from Z=0.0 to Z=119.6).\n12. Finish turn diameter Ø34.1 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01632", "images": ["images/Shaft_01632.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.3 mm and length at least 269.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.3 mm over length 53.2 mm (from Z=0.0 to Z=53.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 211.3 mm (from Z=0.0 to Z=211.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01213", "images": ["images/Shaft_01213.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.0 mm and length at least 203.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 152.3 mm (from Z=0.0 to Z=152.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04741", "images": ["images/Shaft_04741.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.4 mm and length at least 253.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.4 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 96.3 mm (from Z=0.0 to Z=227.2).\n10. Finish turn diameter Ø57.5 mm over length 34.6 mm (from Z=0.0 to Z=130.9).\n11. Finish turn diameter Ø51.1 mm over length 30.2 mm (from Z=0.0 to Z=96.3).\n12. Finish turn diameter Ø31.4 mm over length 66.1 mm (from Z=0.0 to Z=66.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01933", "images": ["images/Shaft_01933.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.8 mm and length at least 316.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 76.6 mm (from Z=0.0 to Z=286.3).\n10. Finish turn diameter Ø30.0 mm over length 209.7 mm (from Z=0.0 to Z=209.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00884", "images": ["images/Shaft_00884.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.1 mm and length at least 269.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 105.3 mm (from Z=0.0 to Z=105.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 159.2 mm (from Z=0.0 to Z=159.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04835", "images": ["images/Shaft_04835.png", "detail_png/Shaft_04835_length.png", "detail_png/Shaft_04835_diam.png", "detail_png/Shaft_04835_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.9 mm and length at least 260.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 26.8 mm (from Z=0.0 to Z=26.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 228.2 mm (from Z=0.0 to Z=228.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04177", "images": ["images/Shaft_04177.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.9 mm and length at least 173.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 16.8 mm (from Z=0.0 to Z=132.9).\n10. Finish turn diameter Ø30.0 mm over length 116.1 mm (from Z=0.0 to Z=116.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00198", "images": ["images/Shaft_00198.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.2 mm and length at least 284.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 68.8 mm (from Z=0.0 to Z=68.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.8 mm over length 9.3 mm (from Z=0.0 to Z=211.1).\n10. Finish turn diameter Ø30.0 mm over length 201.8 mm (from Z=0.0 to Z=201.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02840", "images": ["images/Shaft_02840.png", "detail_png/Shaft_02840_length.png", "detail_png/Shaft_02840_diam.png", "detail_png/Shaft_02840_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.5 mm and length at least 201.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.1 mm over length 21.8 mm (from Z=0.0 to Z=178.9).\n10. Finish turn diameter Ø30.0 mm over length 157.1 mm (from Z=0.0 to Z=157.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02831", "images": ["images/Shaft_02831.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 162.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 23.1 mm (from Z=0.0 to Z=142.4).\n10. Finish turn diameter Ø30.0 mm over length 119.3 mm (from Z=0.0 to Z=119.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04325", "images": ["images/Shaft_04325.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.2 mm and length at least 270.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.8 mm over length 55.9 mm (from Z=0.0 to Z=213.1).\n10. Finish turn diameter Ø50.1 mm over length 20.4 mm (from Z=0.0 to Z=157.2).\n11. Finish turn diameter Ø44.6 mm over length 25.2 mm (from Z=0.0 to Z=136.8).\n12. Finish turn diameter Ø37.2 mm over length 83.2 mm (from Z=0.0 to Z=111.6).\n13. Finish turn diameter Ø30.3 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00636", "images": ["images/Shaft_00636.png", "detail_png/Shaft_00636_length.png", "detail_png/Shaft_00636_diam.png", "detail_png/Shaft_00636_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 321.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 232.4 mm (from Z=0.0 to Z=232.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 84.0 mm (from Z=0.0 to Z=84.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00674", "images": ["images/Shaft_00674.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.3 mm and length at least 298.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.3 mm over length 57.9 mm (from Z=0.0 to Z=227.0).\n10. Finish turn diameter Ø30.0 mm over length 169.1 mm (from Z=0.0 to Z=169.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02991", "images": ["images/Shaft_02991.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.9 mm and length at least 77.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 9.6 mm (from Z=0.0 to Z=9.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.1 mm over length 13.3 mm (from Z=0.0 to Z=63.3).\n9. Finish turn diameter Ø30.7 mm over length 15.4 mm (from Z=0.0 to Z=50.0).\n10. Finish turn diameter Ø30.0 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00403", "images": ["images/Shaft_00403.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.5 mm and length at least 197.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.7 mm over length 28.8 mm (from Z=0.0 to Z=146.9).\n10. Finish turn diameter Ø65.8 mm over length 33.8 mm (from Z=0.0 to Z=118.1).\n11. Finish turn diameter Ø56.4 mm over length 51.2 mm (from Z=0.0 to Z=84.3).\n12. Finish turn diameter Ø50.7 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02207", "images": ["images/Shaft_02207.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.9 mm and length at least 261.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 236.0 mm (from Z=0.0 to Z=236.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01878", "images": ["images/Shaft_01878.png", "detail_png/Shaft_01878_length.png", "detail_png/Shaft_01878_diam.png", "detail_png/Shaft_01878_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.7 mm and length at least 143.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.2 mm over length 79.0 mm (from Z=0.0 to Z=129.8).\n9. Finish turn diameter Ø35.6 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00152", "images": ["images/Shaft_00152.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.3 mm and length at least 193.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.6 mm over length 102.8 mm (from Z=0.0 to Z=169.0).\n9. Finish turn diameter Ø58.6 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04822", "images": ["images/Shaft_04822.png", "detail_png/Shaft_04822_length.png", "detail_png/Shaft_04822_diam.png", "detail_png/Shaft_04822_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.2 mm and length at least 98.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.7 mm over length 20.0 mm (from Z=0.0 to Z=76.6).\n9. Finish turn diameter Ø38.8 mm over length 10.9 mm (from Z=0.0 to Z=56.6).\n10. Finish turn diameter Ø30.0 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03885", "images": ["images/Shaft_03885.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.7 mm and length at least 289.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 90.5 mm (from Z=0.0 to Z=218.1).\n10. Finish turn diameter Ø49.5 mm over length 38.3 mm (from Z=0.0 to Z=127.6).\n11. Finish turn diameter Ø40.7 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03728", "images": ["images/Shaft_03728.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.5 mm and length at least 216.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.7 mm over length 7.7 mm (from Z=0.0 to Z=180.2).\n10. Finish turn diameter Ø58.5 mm over length 45.3 mm (from Z=0.0 to Z=172.5).\n11. Finish turn diameter Ø41.8 mm over length 34.0 mm (from Z=0.0 to Z=127.2).\n12. Finish turn diameter Ø31.8 mm over length 45.7 mm (from Z=0.0 to Z=93.2).\n13. Finish turn diameter Ø30.0 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01510", "images": ["images/Shaft_01510.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.8 mm and length at least 116.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.8 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.7 mm over length 35.1 mm (from Z=0.0 to Z=92.3).\n9. Finish turn diameter Ø37.9 mm over length 27.9 mm (from Z=0.0 to Z=57.2).\n10. Finish turn diameter Ø30.0 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00051", "images": ["images/Shaft_00051.png", "detail_png/Shaft_00051_length.png", "detail_png/Shaft_00051_diam.png", "detail_png/Shaft_00051_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.5 mm and length at least 302.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.5 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.5 mm over length 70.3 mm (from Z=0.0 to Z=275.8).\n10. Finish turn diameter Ø45.4 mm over length 62.6 mm (from Z=0.0 to Z=205.5).\n11. Finish turn diameter Ø38.6 mm over length 77.6 mm (from Z=0.0 to Z=142.9).\n12. Finish turn diameter Ø35.2 mm over length 29.4 mm (from Z=0.0 to Z=65.3).\n13. Finish turn diameter Ø30.0 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02381", "images": ["images/Shaft_02381.png", "detail_png/Shaft_02381_length.png", "detail_png/Shaft_02381_diam.png", "detail_png/Shaft_02381_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.5 mm and length at least 87.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.3 mm over length 17.0 mm (from Z=0.0 to Z=74.0).\n9. Finish turn diameter Ø30.0 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01171", "images": ["images/Shaft_01171.png", "detail_png/Shaft_01171_length.png", "detail_png/Shaft_01171_diam.png", "detail_png/Shaft_01171_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.6 mm and length at least 259.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.1 mm over length 28.6 mm (from Z=0.0 to Z=182.0).\n10. Finish turn diameter Ø35.6 mm over length 117.1 mm (from Z=0.0 to Z=153.4).\n11. Finish turn diameter Ø30.0 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02294", "images": ["images/Shaft_02294.png", "detail_png/Shaft_02294_length.png", "detail_png/Shaft_02294_diam.png", "detail_png/Shaft_02294_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.6 mm and length at least 274.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 82.7 mm (from Z=0.0 to Z=214.8).\n10. Finish turn diameter Ø53.4 mm over length 68.1 mm (from Z=0.0 to Z=132.1).\n11. Finish turn diameter Ø39.0 mm over length 33.4 mm (from Z=0.0 to Z=64.0).\n12. Finish turn diameter Ø35.4 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04393", "images": ["images/Shaft_04393.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 304.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 186.7 mm (from Z=0.0 to Z=186.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.7 mm over length 113.2 mm (from Z=0.0 to Z=113.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04795", "images": ["images/Shaft_04795.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.7 mm and length at least 277.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 31.9 mm (from Z=0.0 to Z=259.0).\n10. Finish turn diameter Ø30.4 mm over length 17.8 mm (from Z=0.0 to Z=227.1).\n11. Finish turn diameter Ø30.0 mm over length 209.3 mm (from Z=0.0 to Z=209.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04773", "images": ["images/Shaft_04773.png", "detail_png/Shaft_04773_length.png", "detail_png/Shaft_04773_diam.png", "detail_png/Shaft_04773_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.0 mm and length at least 225.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.0 mm over length 50.9 mm (from Z=0.0 to Z=153.2).\n10. Finish turn diameter Ø30.0 mm over length 102.3 mm (from Z=0.0 to Z=102.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04186", "images": ["images/Shaft_04186.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.0 mm and length at least 186.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 45.3 mm (from Z=0.0 to Z=122.0).\n9. Finish turn diameter Ø31.8 mm over length 39.6 mm (from Z=0.0 to Z=76.7).\n10. Finish turn diameter Ø30.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04631", "images": ["images/Shaft_04631.png", "detail_png/Shaft_04631_length.png", "detail_png/Shaft_04631_diam.png", "detail_png/Shaft_04631_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.9 mm and length at least 235.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.5 mm (from Z=0.0 to Z=191.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00647", "images": ["images/Shaft_00647.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 287.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 171.9 mm (from Z=0.0 to Z=171.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 110.3 mm (from Z=0.0 to Z=110.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02929", "images": ["images/Shaft_02929.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.5 mm and length at least 290.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 32.0 mm (from Z=0.0 to Z=32.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 50.5 mm (from Z=0.0 to Z=253.1).\n10. Finish turn diameter Ø50.7 mm over length 7.0 mm (from Z=0.0 to Z=202.6).\n11. Finish turn diameter Ø39.1 mm over length 59.7 mm (from Z=0.0 to Z=195.6).\n12. Finish turn diameter Ø30.0 mm over length 135.9 mm (from Z=0.0 to Z=135.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02925", "images": ["images/Shaft_02925.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.0 mm and length at least 240.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 114.3 mm (from Z=0.0 to Z=114.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.5 mm over length 109.8 mm (from Z=0.0 to Z=120.8).\n10. Finish turn diameter Ø38.4 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00860", "images": ["images/Shaft_00860.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.1 mm and length at least 284.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.7 mm over length 71.6 mm (from Z=0.0 to Z=212.8).\n10. Finish turn diameter Ø33.7 mm over length 78.3 mm (from Z=0.0 to Z=141.2).\n11. Finish turn diameter Ø30.0 mm over length 62.9 mm (from Z=0.0 to Z=62.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01880", "images": ["images/Shaft_01880.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.1 mm and length at least 324.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.0 mm over length 29.6 mm (from Z=0.0 to Z=264.7).\n10. Finish turn diameter Ø42.3 mm over length 67.1 mm (from Z=0.0 to Z=235.1).\n11. Finish turn diameter Ø39.1 mm over length 66.8 mm (from Z=0.0 to Z=168.0).\n12. Finish turn diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03662", "images": ["images/Shaft_03662.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 148.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 105.1 mm (from Z=0.0 to Z=105.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.0 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00096", "images": ["images/Shaft_00096.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.3 mm and length at least 142.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.3 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.7 mm over length 38.9 mm (from Z=0.0 to Z=114.8).\n9. Finish turn diameter Ø40.7 mm over length 10.7 mm (from Z=0.0 to Z=75.9).\n10. Finish turn diameter Ø30.0 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04384", "images": ["images/Shaft_04384.png", "detail_png/Shaft_04384_length.png", "detail_png/Shaft_04384_diam.png", "detail_png/Shaft_04384_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.1 mm and length at least 135.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 28.2 mm (from Z=0.0 to Z=92.3).\n9. Finish turn diameter Ø43.7 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03243", "images": ["images/Shaft_03243.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.7 mm and length at least 203.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.4 mm over length 33.2 mm (from Z=0.0 to Z=156.3).\n10. Finish turn diameter Ø30.0 mm over length 123.1 mm (from Z=0.0 to Z=123.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03660", "images": ["images/Shaft_03660.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.0 mm and length at least 220.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.7 mm (from Z=0.0 to Z=148.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02579", "images": ["images/Shaft_02579.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 190.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.9 mm (from Z=0.0 to Z=167.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.7 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03546", "images": ["images/Shaft_03546.png", "detail_png/Shaft_03546_length.png", "detail_png/Shaft_03546_diam.png", "detail_png/Shaft_03546_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.3 mm and length at least 181.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 31.7 mm (from Z=0.0 to Z=116.4).\n9. Finish turn diameter Ø50.1 mm over length 35.3 mm (from Z=0.0 to Z=84.7).\n10. Finish turn diameter Ø32.6 mm over length 49.4 mm (from Z=0.0 to Z=49.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02352", "images": ["images/Shaft_02352.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.5 mm and length at least 100.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.9 mm over length 57.6 mm (from Z=0.0 to Z=85.2).\n9. Finish turn diameter Ø30.0 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03549", "images": ["images/Shaft_03549.png", "detail_png/Shaft_03549_length.png", "detail_png/Shaft_03549_diam.png", "detail_png/Shaft_03549_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.1 mm and length at least 175.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.1 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.9 mm over length 72.7 mm (from Z=0.0 to Z=148.8).\n9. Finish turn diameter Ø39.5 mm over length 76.1 mm (from Z=0.0 to Z=76.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03023", "images": ["images/Shaft_03023.png", "detail_png/Shaft_03023_length.png", "detail_png/Shaft_03023_diam.png", "detail_png/Shaft_03023_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.2 mm and length at least 77.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.5 mm over length 5.0 mm (from Z=0.0 to Z=48.0).\n9. Finish turn diameter Ø30.0 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00955", "images": ["images/Shaft_00955.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.4 mm and length at least 80.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.3 mm over length 33.8 mm (from Z=0.0 to Z=63.5).\n9. Finish turn diameter Ø44.2 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01061", "images": ["images/Shaft_01061.png", "detail_png/Shaft_01061_length.png", "detail_png/Shaft_01061_diam.png", "detail_png/Shaft_01061_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.8 mm and length at least 222.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.2 mm over length 55.5 mm (from Z=0.0 to Z=195.8).\n10. Finish turn diameter Ø32.9 mm over length 50.6 mm (from Z=0.0 to Z=140.3).\n11. Finish turn diameter Ø30.0 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03650", "images": ["images/Shaft_03650.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.1 mm and length at least 101.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.1 mm over length 27.3 mm (from Z=0.0 to Z=27.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00249", "images": ["images/Shaft_00249.png", "detail_png/Shaft_00249_length.png", "detail_png/Shaft_00249_diam.png", "detail_png/Shaft_00249_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.1 mm and length at least 269.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.1 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 36.3 mm (from Z=0.0 to Z=203.2).\n10. Finish turn diameter Ø37.0 mm over length 31.5 mm (from Z=0.0 to Z=166.9).\n11. Finish turn diameter Ø30.0 mm over length 135.4 mm (from Z=0.0 to Z=135.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03157", "images": ["images/Shaft_03157.png", "detail_png/Shaft_03157_length.png", "detail_png/Shaft_03157_diam.png", "detail_png/Shaft_03157_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.7 mm and length at least 292.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.8 mm over length 45.3 mm (from Z=0.0 to Z=217.3).\n10. Finish turn diameter Ø49.7 mm over length 33.6 mm (from Z=0.0 to Z=172.0).\n11. Finish turn diameter Ø35.5 mm over length 11.8 mm (from Z=0.0 to Z=138.4).\n12. Finish turn diameter Ø31.4 mm over length 59.1 mm (from Z=0.0 to Z=126.6).\n13. Finish turn diameter Ø30.0 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02124", "images": ["images/Shaft_02124.png", "detail_png/Shaft_02124_length.png", "detail_png/Shaft_02124_diam.png", "detail_png/Shaft_02124_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.5 mm and length at least 283.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 77.4 mm (from Z=0.0 to Z=77.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.8 mm over length 34.4 mm (from Z=0.0 to Z=200.6).\n10. Finish turn diameter Ø30.0 mm over length 166.2 mm (from Z=0.0 to Z=166.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01729", "images": ["images/Shaft_01729.png", "detail_png/Shaft_01729_length.png", "detail_png/Shaft_01729_diam.png", "detail_png/Shaft_01729_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 274.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 161.9 mm (from Z=0.0 to Z=161.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.1 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00885", "images": ["images/Shaft_00885.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.7 mm and length at least 215.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.7 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 188.5 mm (from Z=0.0 to Z=188.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02101", "images": ["images/Shaft_02101.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.7 mm and length at least 78.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02524", "images": ["images/Shaft_02524.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 133.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 77.0 mm (from Z=0.0 to Z=77.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.8 mm over length 51.7 mm (from Z=0.0 to Z=51.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01748", "images": ["images/Shaft_01748.png", "detail_png/Shaft_01748_length.png", "detail_png/Shaft_01748_diam.png", "detail_png/Shaft_01748_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.4 mm and length at least 229.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 79.3 mm (from Z=0.0 to Z=79.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 62.2 mm (from Z=0.0 to Z=145.6).\n10. Finish turn diameter Ø32.4 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04022", "images": ["images/Shaft_04022.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.3 mm and length at least 82.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.4 mm over length 5.0 mm (from Z=0.0 to Z=54.4).\n9. Finish turn diameter Ø37.3 mm over length 5.0 mm (from Z=0.0 to Z=49.4).\n10. Finish turn diameter Ø30.7 mm over length 20.8 mm (from Z=0.0 to Z=44.4).\n11. Finish turn diameter Ø30.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01331", "images": ["images/Shaft_01331.png", "detail_png/Shaft_01331_length.png", "detail_png/Shaft_01331_diam.png", "detail_png/Shaft_01331_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.0 mm and length at least 251.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.3 mm over length 57.7 mm (from Z=0.0 to Z=212.8).\n10. Finish turn diameter Ø30.8 mm over length 57.2 mm (from Z=0.0 to Z=155.1).\n11. Finish turn diameter Ø30.0 mm over length 97.9 mm (from Z=0.0 to Z=97.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03551", "images": ["images/Shaft_03551.png", "detail_png/Shaft_03551_length.png", "detail_png/Shaft_03551_diam.png", "detail_png/Shaft_03551_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.0 mm and length at least 235.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 91.6 mm (from Z=0.0 to Z=91.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 138.5 mm (from Z=0.0 to Z=138.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01378", "images": ["images/Shaft_01378.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.9 mm and length at least 247.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.9 mm over length 52.6 mm (from Z=0.0 to Z=196.8).\n10. Finish turn diameter Ø57.7 mm over length 82.8 mm (from Z=0.0 to Z=144.2).\n11. Finish turn diameter Ø43.3 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02195", "images": ["images/Shaft_02195.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 313.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 128.5 mm (from Z=0.0 to Z=128.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.5 mm over length 180.1 mm (from Z=0.0 to Z=180.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04405", "images": ["images/Shaft_04405.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.7 mm and length at least 93.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02895", "images": ["images/Shaft_02895.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.1 mm and length at least 176.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.7 mm over length 6.3 mm (from Z=0.0 to Z=125.1).\n10. Finish turn diameter Ø30.0 mm over length 118.8 mm (from Z=0.0 to Z=118.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02116", "images": ["images/Shaft_02116.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 141.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 36.1 mm (from Z=0.0 to Z=111.7).\n9. Finish turn diameter Ø48.6 mm over length 30.8 mm (from Z=0.0 to Z=75.6).\n10. Finish turn diameter Ø35.6 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00929", "images": ["images/Shaft_00929.png", "detail_png/Shaft_00929_length.png", "detail_png/Shaft_00929_diam.png", "detail_png/Shaft_00929_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.1 mm and length at least 300.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.0 mm over length 52.6 mm (from Z=0.0 to Z=274.7).\n10. Finish turn diameter Ø41.9 mm over length 20.3 mm (from Z=0.0 to Z=222.1).\n11. Finish turn diameter Ø31.1 mm over length 69.7 mm (from Z=0.0 to Z=201.8).\n12. Finish turn diameter Ø30.0 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04582", "images": ["images/Shaft_04582.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 143.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.4 mm over length 36.6 mm (from Z=0.0 to Z=113.8).\n9. Finish turn diameter Ø30.0 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01147", "images": ["images/Shaft_01147.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.6 mm and length at least 162.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.6 mm over length 16.7 mm (from Z=0.0 to Z=129.3).\n9. Finish turn diameter Ø54.1 mm over length 17.8 mm (from Z=0.0 to Z=112.6).\n10. Finish turn diameter Ø44.2 mm over length 30.2 mm (from Z=0.0 to Z=94.8).\n11. Finish turn diameter Ø30.0 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01394", "images": ["images/Shaft_01394.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 128.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.4 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04340", "images": ["images/Shaft_04340.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.1 mm and length at least 119.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.1 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.9 mm over length 23.2 mm (from Z=0.0 to Z=99.2).\n9. Finish turn diameter Ø59.9 mm over length 39.4 mm (from Z=0.0 to Z=76.0).\n10. Finish turn diameter Ø52.5 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01258", "images": ["images/Shaft_01258.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.1 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.1 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.1 mm over length 31.4 mm (from Z=0.0 to Z=210.7).\n10. Finish turn diameter Ø60.2 mm over length 91.5 mm (from Z=0.0 to Z=179.3).\n11. Finish turn diameter Ø40.4 mm over length 63.1 mm (from Z=0.0 to Z=87.8).\n12. Finish turn diameter Ø30.9 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01091", "images": ["images/Shaft_01091.png", "detail_png/Shaft_01091_length.png", "detail_png/Shaft_01091_diam.png", "detail_png/Shaft_01091_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.5 mm and length at least 83.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03341", "images": ["images/Shaft_03341.png", "detail_png/Shaft_03341_length.png", "detail_png/Shaft_03341_diam.png", "detail_png/Shaft_03341_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.5 mm and length at least 274.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 125.4 mm (from Z=0.0 to Z=125.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.7 mm over length 113.3 mm (from Z=0.0 to Z=143.8).\n10. Finish turn diameter Ø34.4 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01419", "images": ["images/Shaft_01419.png", "detail_png/Shaft_01419_length.png", "detail_png/Shaft_01419_diam.png", "detail_png/Shaft_01419_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.4 mm and length at least 167.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 153.5 mm (from Z=0.0 to Z=153.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00047", "images": ["images/Shaft_00047.png", "detail_png/Shaft_00047_length.png", "detail_png/Shaft_00047_diam.png", "detail_png/Shaft_00047_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 318.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 266.5 mm (from Z=0.0 to Z=266.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.3 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02223", "images": ["images/Shaft_02223.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 210.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 161.7 mm (from Z=0.0 to Z=161.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 43.7 mm (from Z=0.0 to Z=43.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03865", "images": ["images/Shaft_03865.png", "detail_png/Shaft_03865_length.png", "detail_png/Shaft_03865_diam.png", "detail_png/Shaft_03865_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.4 mm and length at least 125.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.0 mm (from Z=0.0 to Z=78.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04272", "images": ["images/Shaft_04272.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.4 mm and length at least 297.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 75.1 mm (from Z=0.0 to Z=75.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 48.0 mm (from Z=0.0 to Z=217.6).\n10. Finish turn diameter Ø30.0 mm over length 169.6 mm (from Z=0.0 to Z=169.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00561", "images": ["images/Shaft_00561.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 247.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 193.2 mm (from Z=0.0 to Z=193.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.1 mm over length 49.5 mm (from Z=0.0 to Z=49.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04718", "images": ["images/Shaft_04718.png", "detail_png/Shaft_04718_length.png", "detail_png/Shaft_04718_diam.png", "detail_png/Shaft_04718_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.3 mm and length at least 305.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.1 mm over length 93.2 mm (from Z=0.0 to Z=283.0).\n10. Finish turn diameter Ø36.6 mm over length 41.9 mm (from Z=0.0 to Z=189.8).\n11. Finish turn diameter Ø30.9 mm over length 15.1 mm (from Z=0.0 to Z=147.9).\n12. Finish turn diameter Ø30.0 mm over length 132.8 mm (from Z=0.0 to Z=132.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03190", "images": ["images/Shaft_03190.png", "detail_png/Shaft_03190_length.png", "detail_png/Shaft_03190_diam.png", "detail_png/Shaft_03190_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.9 mm and length at least 229.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 65.6 mm (from Z=0.0 to Z=182.9).\n10. Finish turn diameter Ø30.0 mm over length 117.3 mm (from Z=0.0 to Z=117.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03398", "images": ["images/Shaft_03398.png", "detail_png/Shaft_03398_length.png", "detail_png/Shaft_03398_diam.png", "detail_png/Shaft_03398_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.1 mm and length at least 219.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.5 mm over length 120.2 mm (from Z=0.0 to Z=164.7).\n10. Finish turn diameter Ø35.0 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01804", "images": ["images/Shaft_01804.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.0 mm and length at least 306.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 233.0 mm (from Z=0.0 to Z=233.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03902", "images": ["images/Shaft_03902.png", "detail_png/Shaft_03902_length.png", "detail_png/Shaft_03902_diam.png", "detail_png/Shaft_03902_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.4 mm and length at least 257.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 197.5 mm (from Z=0.0 to Z=197.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03506", "images": ["images/Shaft_03506.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.7 mm and length at least 69.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.7 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.1 mm over length 11.9 mm (from Z=0.0 to Z=51.9).\n9. Finish turn diameter Ø30.0 mm over length 40.0 mm (from Z=0.0 to Z=40.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02723", "images": ["images/Shaft_02723.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.3 mm and length at least 153.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.3 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.6 mm over length 49.3 mm (from Z=0.0 to Z=97.5).\n9. Finish turn diameter Ø30.0 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01911", "images": ["images/Shaft_01911.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.0 mm and length at least 106.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.0 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00531", "images": ["images/Shaft_00531.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.8 mm and length at least 247.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 78.5 mm (from Z=0.0 to Z=220.3).\n10. Finish turn diameter Ø61.0 mm over length 41.4 mm (from Z=0.0 to Z=141.8).\n11. Finish turn diameter Ø47.8 mm over length 82.7 mm (from Z=0.0 to Z=100.4).\n12. Finish turn diameter Ø31.7 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02499", "images": ["images/Shaft_02499.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 122.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 82.7 mm (from Z=0.0 to Z=82.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.1 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02003", "images": ["images/Shaft_02003.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.7 mm and length at least 277.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 32.1 mm (from Z=0.0 to Z=218.8).\n10. Finish turn diameter Ø30.0 mm over length 186.7 mm (from Z=0.0 to Z=186.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04421", "images": ["images/Shaft_04421.png", "detail_png/Shaft_04421_length.png", "detail_png/Shaft_04421_diam.png", "detail_png/Shaft_04421_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.1 mm and length at least 162.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.1 mm over length 8.4 mm (from Z=0.0 to Z=8.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 30.7 mm (from Z=0.0 to Z=149.1).\n9. Finish turn diameter Ø47.2 mm over length 49.7 mm (from Z=0.0 to Z=118.4).\n10. Finish turn diameter Ø38.4 mm over length 19.7 mm (from Z=0.0 to Z=68.7).\n11. Finish turn diameter Ø30.0 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04226", "images": ["images/Shaft_04226.png", "detail_png/Shaft_04226_length.png", "detail_png/Shaft_04226_diam.png", "detail_png/Shaft_04226_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.4 mm and length at least 166.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.6 mm (from Z=0.0 to Z=88.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02261", "images": ["images/Shaft_02261.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.3 mm and length at least 106.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02278", "images": ["images/Shaft_02278.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.6 mm and length at least 220.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 34.7 mm (from Z=0.0 to Z=168.8).\n10. Finish turn diameter Ø30.0 mm over length 134.1 mm (from Z=0.0 to Z=134.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00359", "images": ["images/Shaft_00359.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.9 mm and length at least 88.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04337", "images": ["images/Shaft_04337.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.6 mm and length at least 124.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.9 mm over length 16.6 mm (from Z=0.0 to Z=93.8).\n9. Finish turn diameter Ø58.4 mm over length 30.9 mm (from Z=0.0 to Z=77.2).\n10. Finish turn diameter Ø46.9 mm over length 25.2 mm (from Z=0.0 to Z=46.3).\n11. Finish turn diameter Ø36.6 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01234", "images": ["images/Shaft_01234.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.7 mm and length at least 185.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.2 mm over length 62.6 mm (from Z=0.0 to Z=155.4).\n9. Finish turn diameter Ø43.5 mm over length 92.8 mm (from Z=0.0 to Z=92.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03325", "images": ["images/Shaft_03325.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.0 mm and length at least 291.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.0 mm over length 92.4 mm (from Z=0.0 to Z=92.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.2 mm over length 14.3 mm (from Z=0.0 to Z=194.5).\n10. Finish turn diameter Ø41.3 mm over length 117.1 mm (from Z=0.0 to Z=180.2).\n11. Finish turn diameter Ø30.5 mm over length 26.4 mm (from Z=0.0 to Z=63.1).\n12. Finish turn diameter Ø30.0 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03274", "images": ["images/Shaft_03274.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.3 mm and length at least 195.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 64.4 mm (from Z=0.0 to Z=64.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.3 mm over length 41.4 mm (from Z=0.0 to Z=126.5).\n10. Finish turn diameter Ø35.4 mm over length 18.5 mm (from Z=0.0 to Z=85.1).\n11. Finish turn diameter Ø30.0 mm over length 66.6 mm (from Z=0.0 to Z=66.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02742", "images": ["images/Shaft_02742.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.8 mm and length at least 266.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 54.8 mm (from Z=0.0 to Z=192.7).\n10. Finish turn diameter Ø30.0 mm over length 137.9 mm (from Z=0.0 to Z=137.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04478", "images": ["images/Shaft_04478.png", "detail_png/Shaft_04478_length.png", "detail_png/Shaft_04478_diam.png", "detail_png/Shaft_04478_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.0 mm and length at least 98.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.0 mm over length 35.1 mm (from Z=0.0 to Z=81.7).\n9. Finish turn diameter Ø53.0 mm over length 5.5 mm (from Z=0.0 to Z=46.6).\n10. Finish turn diameter Ø33.1 mm over length 23.1 mm (from Z=0.0 to Z=41.1).\n11. Finish turn diameter Ø30.0 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04333", "images": ["images/Shaft_04333.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.0 mm and length at least 110.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.0 mm over length 8.7 mm (from Z=0.0 to Z=8.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.2 mm over length 73.4 mm (from Z=0.0 to Z=96.3).\n9. Finish turn diameter Ø30.0 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00396", "images": ["images/Shaft_00396.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.9 mm and length at least 116.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 6.1 mm (from Z=0.0 to Z=6.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.5 mm (from Z=0.0 to Z=105.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01130", "images": ["images/Shaft_01130.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.8 mm and length at least 101.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.3 mm over length 45.6 mm (from Z=0.0 to Z=78.7).\n9. Finish turn diameter Ø31.6 mm over length 19.9 mm (from Z=0.0 to Z=33.1).\n10. Finish turn diameter Ø30.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02428", "images": ["images/Shaft_02428.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.3 mm and length at least 180.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 156.4 mm (from Z=0.0 to Z=156.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02037", "images": ["images/Shaft_02037.png", "detail_png/Shaft_02037_length.png", "detail_png/Shaft_02037_diam.png", "detail_png/Shaft_02037_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.7 mm and length at least 171.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.2 mm over length 36.3 mm (from Z=0.0 to Z=134.9).\n9. Finish turn diameter Ø55.2 mm over length 34.5 mm (from Z=0.0 to Z=98.6).\n10. Finish turn diameter Ø45.3 mm over length 28.8 mm (from Z=0.0 to Z=64.1).\n11. Finish turn diameter Ø36.3 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01024", "images": ["images/Shaft_01024.png", "detail_png/Shaft_01024_length.png", "detail_png/Shaft_01024_diam.png", "detail_png/Shaft_01024_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.3 mm and length at least 69.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 28.8 mm (from Z=0.0 to Z=38.7).\n9. Finish turn diameter Ø39.8 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02327", "images": ["images/Shaft_02327.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.1 mm and length at least 301.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 26.0 mm (from Z=0.0 to Z=249.0).\n10. Finish turn diameter Ø40.9 mm over length 101.4 mm (from Z=0.0 to Z=223.0).\n11. Finish turn diameter Ø34.5 mm over length 121.6 mm (from Z=0.0 to Z=121.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04468", "images": ["images/Shaft_04468.png", "detail_png/Shaft_04468_length.png", "detail_png/Shaft_04468_diam.png", "detail_png/Shaft_04468_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.2 mm and length at least 93.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.2 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 14.3 mm (from Z=0.0 to Z=73.5).\n9. Finish turn diameter Ø30.0 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01781", "images": ["images/Shaft_01781.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.9 mm and length at least 266.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.9 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.0 mm over length 15.4 mm (from Z=0.0 to Z=204.4).\n10. Finish turn diameter Ø40.3 mm over length 39.9 mm (from Z=0.0 to Z=189.0).\n11. Finish turn diameter Ø30.0 mm over length 149.1 mm (from Z=0.0 to Z=149.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02740", "images": ["images/Shaft_02740.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.2 mm and length at least 255.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.0 mm (from Z=0.0 to Z=200.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00811", "images": ["images/Shaft_00811.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 262.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 193.4 mm (from Z=0.0 to Z=193.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.7 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01307", "images": ["images/Shaft_01307.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.5 mm and length at least 250.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.5 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.0 mm over length 31.4 mm (from Z=0.0 to Z=211.6).\n10. Finish turn diameter Ø61.7 mm over length 108.6 mm (from Z=0.0 to Z=180.2).\n11. Finish turn diameter Ø58.5 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01681", "images": ["images/Shaft_01681.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 158.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.0 mm (from Z=0.0 to Z=136.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02498", "images": ["images/Shaft_02498.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.8 mm and length at least 188.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.8 mm over length 38.3 mm (from Z=0.0 to Z=130.6).\n9. Finish turn diameter Ø53.8 mm over length 35.4 mm (from Z=0.0 to Z=92.3).\n10. Finish turn diameter Ø47.8 mm over length 11.5 mm (from Z=0.0 to Z=56.9).\n11. Finish turn diameter Ø36.4 mm over length 34.4 mm (from Z=0.0 to Z=45.4).\n12. Finish turn diameter Ø30.0 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02956", "images": ["images/Shaft_02956.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 134.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 122.5 mm (from Z=0.0 to Z=122.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.8 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00014", "images": ["images/Shaft_00014.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.2 mm and length at least 161.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.2 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.3 mm over length 45.4 mm (from Z=0.0 to Z=122.6).\n9. Finish turn diameter Ø48.8 mm over length 12.4 mm (from Z=0.0 to Z=77.2).\n10. Finish turn diameter Ø37.1 mm over length 6.8 mm (from Z=0.0 to Z=64.8).\n11. Finish turn diameter Ø30.0 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00428", "images": ["images/Shaft_00428.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.9 mm and length at least 265.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 101.3 mm (from Z=0.0 to Z=101.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 158.9 mm (from Z=0.0 to Z=158.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04309", "images": ["images/Shaft_04309.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 322.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 284.2 mm (from Z=0.0 to Z=284.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.4 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01447", "images": ["images/Shaft_01447.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.0 mm and length at least 146.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 103.1 mm (from Z=0.0 to Z=103.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03516", "images": ["images/Shaft_03516.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.1 mm and length at least 262.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 54.2 mm (from Z=0.0 to Z=180.6).\n10. Finish turn diameter Ø42.6 mm over length 41.0 mm (from Z=0.0 to Z=126.4).\n11. Finish turn diameter Ø39.1 mm over length 51.2 mm (from Z=0.0 to Z=85.4).\n12. Finish turn diameter Ø30.0 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02240", "images": ["images/Shaft_02240.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.2 mm and length at least 266.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.6 mm over length 34.9 mm (from Z=0.0 to Z=206.5).\n10. Finish turn diameter Ø42.5 mm over length 57.6 mm (from Z=0.0 to Z=171.6).\n11. Finish turn diameter Ø39.1 mm over length 51.3 mm (from Z=0.0 to Z=114.0).\n12. Finish turn diameter Ø30.0 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04247", "images": ["images/Shaft_04247.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.9 mm and length at least 281.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 71.8 mm (from Z=0.0 to Z=261.1).\n10. Finish turn diameter Ø56.4 mm over length 64.9 mm (from Z=0.0 to Z=189.3).\n11. Finish turn diameter Ø47.1 mm over length 60.1 mm (from Z=0.0 to Z=124.4).\n12. Finish turn diameter Ø30.0 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04432", "images": ["images/Shaft_04432.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.3 mm and length at least 186.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.5 mm over length 42.3 mm (from Z=0.0 to Z=128.1).\n9. Finish turn diameter Ø34.7 mm over length 85.8 mm (from Z=0.0 to Z=85.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00075", "images": ["images/Shaft_00075.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.6 mm and length at least 153.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 22.3 mm (from Z=0.0 to Z=92.7).\n9. Finish turn diameter Ø31.6 mm over length 14.5 mm (from Z=0.0 to Z=70.4).\n10. Finish turn diameter Ø30.0 mm over length 55.9 mm (from Z=0.0 to Z=55.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04434", "images": ["images/Shaft_04434.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.1 mm and length at least 284.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 260.8 mm (from Z=0.0 to Z=260.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01981", "images": ["images/Shaft_01981.png", "detail_png/Shaft_01981_length.png", "detail_png/Shaft_01981_diam.png", "detail_png/Shaft_01981_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.2 mm and length at least 153.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.8 mm over length 21.7 mm (from Z=0.0 to Z=118.4).\n10. Finish turn diameter Ø30.0 mm over length 96.7 mm (from Z=0.0 to Z=96.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01011", "images": ["images/Shaft_01011.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 291.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 203.0 mm (from Z=0.0 to Z=203.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.2 mm over length 83.3 mm (from Z=0.0 to Z=83.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02007", "images": ["images/Shaft_02007.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.3 mm and length at least 174.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 113.3 mm (from Z=0.0 to Z=113.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00479", "images": ["images/Shaft_00479.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 231.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 123.6 mm (from Z=0.0 to Z=123.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04858", "images": ["images/Shaft_04858.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.5 mm and length at least 124.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.5 mm over length 41.5 mm (from Z=0.0 to Z=97.9).\n9. Finish turn diameter Ø46.9 mm over length 9.5 mm (from Z=0.0 to Z=56.4).\n10. Finish turn diameter Ø41.3 mm over length 28.2 mm (from Z=0.0 to Z=46.9).\n11. Finish turn diameter Ø30.0 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03063", "images": ["images/Shaft_03063.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.6 mm and length at least 289.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 68.7 mm (from Z=0.0 to Z=68.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.3 mm over length 74.5 mm (from Z=0.0 to Z=216.1).\n10. Finish turn diameter Ø30.0 mm over length 141.6 mm (from Z=0.0 to Z=141.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03470", "images": ["images/Shaft_03470.png", "detail_png/Shaft_03470_length.png", "detail_png/Shaft_03470_diam.png", "detail_png/Shaft_03470_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.7 mm and length at least 272.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø75.4 mm over length 21.0 mm (from Z=0.0 to Z=194.4).\n10. Finish turn diameter Ø66.7 mm over length 76.4 mm (from Z=0.0 to Z=173.4).\n11. Finish turn diameter Ø48.8 mm over length 34.5 mm (from Z=0.0 to Z=97.0).\n12. Finish turn diameter Ø33.0 mm over length 52.2 mm (from Z=0.0 to Z=62.5).\n13. Finish turn diameter Ø30.0 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02422", "images": ["images/Shaft_02422.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.8 mm and length at least 324.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 85.5 mm (from Z=0.0 to Z=85.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 92.8 mm (from Z=0.0 to Z=233.5).\n10. Finish turn diameter Ø38.0 mm over length 47.0 mm (from Z=0.0 to Z=140.7).\n11. Finish turn diameter Ø33.2 mm over length 93.7 mm (from Z=0.0 to Z=93.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01280", "images": ["images/Shaft_01280.png", "detail_png/Shaft_01280_length.png", "detail_png/Shaft_01280_diam.png", "detail_png/Shaft_01280_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 225.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 166.0 mm (from Z=0.0 to Z=166.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04053", "images": ["images/Shaft_04053.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.1 mm and length at least 263.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 63.8 mm (from Z=0.0 to Z=63.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.4 mm over length 90.0 mm (from Z=0.0 to Z=194.3).\n10. Finish turn diameter Ø42.6 mm over length 104.3 mm (from Z=0.0 to Z=104.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01671", "images": ["images/Shaft_01671.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.4 mm and length at least 275.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.4 mm over length 9.6 mm (from Z=0.0 to Z=9.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.3 mm over length 32.1 mm (from Z=0.0 to Z=261.1).\n10. Finish turn diameter Ø30.0 mm over length 229.0 mm (from Z=0.0 to Z=229.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00368", "images": ["images/Shaft_00368.png", "detail_png/Shaft_00368_length.png", "detail_png/Shaft_00368_diam.png", "detail_png/Shaft_00368_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 225.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.8 mm over length 42.9 mm (from Z=0.0 to Z=184.8).\n10. Finish turn diameter Ø40.5 mm over length 18.9 mm (from Z=0.0 to Z=141.9).\n11. Finish turn diameter Ø30.0 mm over length 123.0 mm (from Z=0.0 to Z=123.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03569", "images": ["images/Shaft_03569.png", "detail_png/Shaft_03569_length.png", "detail_png/Shaft_03569_diam.png", "detail_png/Shaft_03569_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.5 mm and length at least 193.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 96.4 mm (from Z=0.0 to Z=124.4).\n9. Finish turn diameter Ø38.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01465", "images": ["images/Shaft_01465.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.6 mm and length at least 299.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 259.7 mm (from Z=0.0 to Z=259.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01151", "images": ["images/Shaft_01151.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.7 mm and length at least 173.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.4 mm (from Z=0.0 to Z=107.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03460", "images": ["images/Shaft_03460.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.5 mm and length at least 306.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.4 mm over length 42.3 mm (from Z=0.0 to Z=266.7).\n10. Finish turn diameter Ø43.0 mm over length 38.2 mm (from Z=0.0 to Z=224.4).\n11. Finish turn diameter Ø30.5 mm over length 111.5 mm (from Z=0.0 to Z=186.2).\n12. Finish turn diameter Ø30.0 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00907", "images": ["images/Shaft_00907.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.0 mm and length at least 128.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.0 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.5 mm over length 12.9 mm (from Z=0.0 to Z=97.0).\n9. Finish turn diameter Ø30.0 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00038", "images": ["images/Shaft_00038.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.1 mm and length at least 281.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 85.8 mm (from Z=0.0 to Z=85.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.8 mm over length 59.4 mm (from Z=0.0 to Z=190.6).\n10. Finish turn diameter Ø30.0 mm over length 131.2 mm (from Z=0.0 to Z=131.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01820", "images": ["images/Shaft_01820.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.0 mm and length at least 198.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 26.0 mm (from Z=0.0 to Z=148.9).\n10. Finish turn diameter Ø30.0 mm over length 122.9 mm (from Z=0.0 to Z=122.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00790", "images": ["images/Shaft_00790.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 260.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 190.5 mm (from Z=0.0 to Z=190.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01517", "images": ["images/Shaft_01517.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.5 mm and length at least 267.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 129.9 mm (from Z=0.0 to Z=129.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.3 mm over length 83.6 mm (from Z=0.0 to Z=132.3).\n10. Finish turn diameter Ø36.2 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03067", "images": ["images/Shaft_03067.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.8 mm and length at least 200.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.4 mm over length 21.9 mm (from Z=0.0 to Z=160.5).\n10. Finish turn diameter Ø31.8 mm over length 45.8 mm (from Z=0.0 to Z=138.6).\n11. Finish turn diameter Ø30.0 mm over length 92.8 mm (from Z=0.0 to Z=92.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04477", "images": ["images/Shaft_04477.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.8 mm and length at least 157.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.2 mm over length 44.0 mm (from Z=0.0 to Z=102.7).\n9. Finish turn diameter Ø43.0 mm over length 25.5 mm (from Z=0.0 to Z=58.7).\n10. Finish turn diameter Ø32.8 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00034", "images": ["images/Shaft_00034.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.5 mm and length at least 225.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 62.1 mm (from Z=0.0 to Z=205.3).\n10. Finish turn diameter Ø56.0 mm over length 63.7 mm (from Z=0.0 to Z=143.2).\n11. Finish turn diameter Ø36.0 mm over length 33.5 mm (from Z=0.0 to Z=79.5).\n12. Finish turn diameter Ø32.0 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00725", "images": ["images/Shaft_00725.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.7 mm and length at least 306.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.6 mm over length 126.7 mm (from Z=0.0 to Z=273.6).\n10. Finish turn diameter Ø34.3 mm over length 35.2 mm (from Z=0.0 to Z=146.9).\n11. Finish turn diameter Ø30.0 mm over length 111.7 mm (from Z=0.0 to Z=111.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01584", "images": ["images/Shaft_01584.png", "detail_png/Shaft_01584_length.png", "detail_png/Shaft_01584_diam.png", "detail_png/Shaft_01584_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.0 mm and length at least 87.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.5 mm over length 5.0 mm (from Z=0.0 to Z=72.1).\n9. Finish turn diameter Ø30.0 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04816", "images": ["images/Shaft_04816.png", "detail_png/Shaft_04816_length.png", "detail_png/Shaft_04816_diam.png", "detail_png/Shaft_04816_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.8 mm and length at least 135.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.6 mm over length 26.3 mm (from Z=0.0 to Z=87.0).\n9. Finish turn diameter Ø54.2 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03820", "images": ["images/Shaft_03820.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 298.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 187.3 mm (from Z=0.0 to Z=187.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.4 mm over length 105.8 mm (from Z=0.0 to Z=105.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01445", "images": ["images/Shaft_01445.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.8 mm and length at least 324.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.9 mm over length 96.5 mm (from Z=0.0 to Z=290.4).\n10. Finish turn diameter Ø30.0 mm over length 193.9 mm (from Z=0.0 to Z=193.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00505", "images": ["images/Shaft_00505.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.7 mm and length at least 253.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 47.9 mm (from Z=0.0 to Z=47.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 27.1 mm (from Z=0.0 to Z=200.6).\n10. Finish turn diameter Ø42.8 mm over length 27.2 mm (from Z=0.0 to Z=173.5).\n11. Finish turn diameter Ø30.4 mm over length 69.0 mm (from Z=0.0 to Z=146.3).\n12. Finish turn diameter Ø30.0 mm over length 77.3 mm (from Z=0.0 to Z=77.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02575", "images": ["images/Shaft_02575.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.6 mm and length at least 75.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.2 mm over length 18.6 mm (from Z=0.0 to Z=62.8).\n9. Finish turn diameter Ø30.0 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00126", "images": ["images/Shaft_00126.png", "detail_png/Shaft_00126_length.png", "detail_png/Shaft_00126_diam.png", "detail_png/Shaft_00126_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.5 mm and length at least 292.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 123.1 mm (from Z=0.0 to Z=123.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 82.9 mm (from Z=0.0 to Z=164.8).\n10. Finish turn diameter Ø52.0 mm over length 81.9 mm (from Z=0.0 to Z=81.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00317", "images": ["images/Shaft_00317.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.9 mm and length at least 225.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 139.1 mm (from Z=0.0 to Z=139.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.9 mm over length 66.8 mm (from Z=0.0 to Z=81.3).\n10. Finish turn diameter Ø30.0 mm over length 14.5 mm (from Z=0.0 to Z=14.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04350", "images": ["images/Shaft_04350.png", "detail_png/Shaft_04350_length.png", "detail_png/Shaft_04350_diam.png", "detail_png/Shaft_04350_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 129.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 101.9 mm (from Z=0.0 to Z=101.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.8 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01608", "images": ["images/Shaft_01608.png", "detail_png/Shaft_01608_length.png", "detail_png/Shaft_01608_diam.png", "detail_png/Shaft_01608_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 205.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.3 mm (from Z=0.0 to Z=85.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 114.7 mm (from Z=0.0 to Z=114.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02250", "images": ["images/Shaft_02250.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 287.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 158.0 mm (from Z=0.0 to Z=158.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.4 mm over length 124.9 mm (from Z=0.0 to Z=124.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04843", "images": ["images/Shaft_04843.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.6 mm and length at least 197.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 68.4 mm (from Z=0.0 to Z=154.9).\n10. Finish turn diameter Ø30.0 mm over length 86.5 mm (from Z=0.0 to Z=86.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02975", "images": ["images/Shaft_02975.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 181.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.8 mm over length 102.3 mm (from Z=0.0 to Z=137.5).\n9. Finish turn diameter Ø30.0 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00039", "images": ["images/Shaft_00039.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.9 mm and length at least 304.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 284.8 mm (from Z=0.0 to Z=284.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03564", "images": ["images/Shaft_03564.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.0 mm and length at least 91.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.7 mm over length 10.4 mm (from Z=0.0 to Z=62.9).\n9. Finish turn diameter Ø30.0 mm over length 52.5 mm (from Z=0.0 to Z=52.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02704", "images": ["images/Shaft_02704.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.8 mm and length at least 86.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 6.6 mm (from Z=0.0 to Z=6.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.7 mm over length 17.9 mm (from Z=0.0 to Z=74.8).\n9. Finish turn diameter Ø30.0 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02249", "images": ["images/Shaft_02249.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.1 mm and length at least 296.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 104.4 mm (from Z=0.0 to Z=238.6).\n10. Finish turn diameter Ø49.3 mm over length 52.8 mm (from Z=0.0 to Z=134.2).\n11. Finish turn diameter Ø43.9 mm over length 81.4 mm (from Z=0.0 to Z=81.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00547", "images": ["images/Shaft_00547.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.8 mm and length at least 215.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.6 mm (from Z=0.0 to Z=148.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03177", "images": ["images/Shaft_03177.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.1 mm and length at least 133.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.0 mm over length 5.0 mm (from Z=0.0 to Z=77.2).\n9. Finish turn diameter Ø46.4 mm over length 38.4 mm (from Z=0.0 to Z=72.2).\n10. Finish turn diameter Ø30.0 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01345", "images": ["images/Shaft_01345.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.4 mm and length at least 80.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01883", "images": ["images/Shaft_01883.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.2 mm and length at least 319.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.2 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.2 mm over length 70.9 mm (from Z=0.0 to Z=263.3).\n10. Finish turn diameter Ø30.0 mm over length 192.4 mm (from Z=0.0 to Z=192.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00862", "images": ["images/Shaft_00862.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.1 mm and length at least 85.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.0 mm over length 19.7 mm (from Z=0.0 to Z=61.6).\n9. Finish turn diameter Ø30.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02688", "images": ["images/Shaft_02688.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.7 mm and length at least 233.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 14.9 mm (from Z=0.0 to Z=177.7).\n10. Finish turn diameter Ø30.0 mm over length 162.8 mm (from Z=0.0 to Z=162.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01317", "images": ["images/Shaft_01317.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.3 mm and length at least 306.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.8 mm over length 20.8 mm (from Z=0.0 to Z=267.0).\n10. Finish turn diameter Ø30.0 mm over length 246.2 mm (from Z=0.0 to Z=246.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01007", "images": ["images/Shaft_01007.png", "detail_png/Shaft_01007_length.png", "detail_png/Shaft_01007_diam.png", "detail_png/Shaft_01007_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 141.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 127.3 mm (from Z=0.0 to Z=127.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.1 mm over length 9.6 mm (from Z=0.0 to Z=9.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03471", "images": ["images/Shaft_03471.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.6 mm and length at least 123.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.6 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.1 mm (from Z=0.0 to Z=88.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01854", "images": ["images/Shaft_01854.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.9 mm and length at least 68.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.2 mm over length 18.1 mm (from Z=0.0 to Z=34.9).\n9. Finish turn diameter Ø42.6 mm over length 11.8 mm (from Z=0.0 to Z=16.8).\n10. Finish turn diameter Ø31.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01070", "images": ["images/Shaft_01070.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.1 mm and length at least 242.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 69.8 mm (from Z=0.0 to Z=176.2).\n10. Finish turn diameter Ø41.8 mm over length 65.2 mm (from Z=0.0 to Z=106.4).\n11. Finish turn diameter Ø32.3 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04833", "images": ["images/Shaft_04833.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.3 mm and length at least 161.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.3 mm over length 23.2 mm (from Z=0.0 to Z=114.8).\n9. Finish turn diameter Ø43.8 mm over length 15.3 mm (from Z=0.0 to Z=91.6).\n10. Finish turn diameter Ø30.0 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02667", "images": ["images/Shaft_02667.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.0 mm and length at least 225.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.3 mm over length 48.1 mm (from Z=0.0 to Z=199.1).\n10. Finish turn diameter Ø30.0 mm over length 151.0 mm (from Z=0.0 to Z=151.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02234", "images": ["images/Shaft_02234.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.7 mm and length at least 239.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 113.7 mm (from Z=0.0 to Z=113.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 120.7 mm (from Z=0.0 to Z=120.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00863", "images": ["images/Shaft_00863.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 88.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø19.9 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01769", "images": ["images/Shaft_01769.png", "detail_png/Shaft_01769_length.png", "detail_png/Shaft_01769_diam.png", "detail_png/Shaft_01769_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.1 mm and length at least 234.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.6 mm over length 92.9 mm (from Z=0.0 to Z=211.8).\n10. Finish turn diameter Ø37.7 mm over length 44.5 mm (from Z=0.0 to Z=118.9).\n11. Finish turn diameter Ø32.7 mm over length 14.2 mm (from Z=0.0 to Z=74.4).\n12. Finish turn diameter Ø30.0 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01144", "images": ["images/Shaft_01144.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.3 mm and length at least 194.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 15.6 mm (from Z=0.0 to Z=150.2).\n9. Finish turn diameter Ø43.4 mm over length 48.6 mm (from Z=0.0 to Z=134.6).\n10. Finish turn diameter Ø30.0 mm over length 86.0 mm (from Z=0.0 to Z=86.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00572", "images": ["images/Shaft_00572.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.7 mm and length at least 157.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.2 mm over length 88.9 mm (from Z=0.0 to Z=136.6).\n9. Finish turn diameter Ø30.0 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02439", "images": ["images/Shaft_02439.png", "detail_png/Shaft_02439_length.png", "detail_png/Shaft_02439_diam.png", "detail_png/Shaft_02439_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.8 mm and length at least 172.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.1 mm over length 55.0 mm (from Z=0.0 to Z=152.0).\n9. Finish turn diameter Ø51.5 mm over length 40.5 mm (from Z=0.0 to Z=97.0).\n10. Finish turn diameter Ø42.7 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04915", "images": ["images/Shaft_04915.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.9 mm and length at least 67.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 5.5 mm (from Z=0.0 to Z=5.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.9 mm over length 5.0 mm (from Z=0.0 to Z=57.3).\n9. Finish turn diameter Ø49.5 mm over length 12.0 mm (from Z=0.0 to Z=52.3).\n10. Finish turn diameter Ø36.3 mm over length 17.6 mm (from Z=0.0 to Z=40.3).\n11. Finish turn diameter Ø30.0 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02173", "images": ["images/Shaft_02173.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.1 mm and length at least 164.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.1 mm over length 77.0 mm (from Z=0.0 to Z=105.4).\n9. Finish turn diameter Ø30.0 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01231", "images": ["images/Shaft_01231.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.1 mm and length at least 134.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.0 mm over length 24.4 mm (from Z=0.0 to Z=104.2).\n9. Finish turn diameter Ø32.1 mm over length 38.1 mm (from Z=0.0 to Z=79.8).\n10. Finish turn diameter Ø30.0 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00286", "images": ["images/Shaft_00286.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.3 mm and length at least 280.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 213.1 mm (from Z=0.0 to Z=213.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04323", "images": ["images/Shaft_04323.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.6 mm and length at least 66.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.1 mm over length 5.0 mm (from Z=0.0 to Z=50.9).\n9. Finish turn diameter Ø30.0 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02950", "images": ["images/Shaft_02950.png", "detail_png/Shaft_02950_length.png", "detail_png/Shaft_02950_diam.png", "detail_png/Shaft_02950_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.6 mm and length at least 124.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.3 mm over length 16.4 mm (from Z=0.0 to Z=52.2).\n9. Finish turn diameter Ø60.6 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03703", "images": ["images/Shaft_03703.png", "detail_png/Shaft_03703_length.png", "detail_png/Shaft_03703_diam.png", "detail_png/Shaft_03703_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.6 mm and length at least 283.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 73.1 mm (from Z=0.0 to Z=263.3).\n10. Finish turn diameter Ø34.4 mm over length 66.6 mm (from Z=0.0 to Z=190.2).\n11. Finish turn diameter Ø30.0 mm over length 123.6 mm (from Z=0.0 to Z=123.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02090", "images": ["images/Shaft_02090.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.2 mm and length at least 172.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 16.6 mm (from Z=0.0 to Z=101.6).\n9. Finish turn diameter Ø38.7 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04357", "images": ["images/Shaft_04357.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.1 mm and length at least 194.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.5 mm over length 32.6 mm (from Z=0.0 to Z=140.3).\n9. Finish turn diameter Ø44.9 mm over length 21.8 mm (from Z=0.0 to Z=107.7).\n10. Finish turn diameter Ø33.8 mm over length 5.3 mm (from Z=0.0 to Z=85.9).\n11. Finish turn diameter Ø30.0 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04377", "images": ["images/Shaft_04377.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.1 mm and length at least 169.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 79.9 mm (from Z=0.0 to Z=79.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 23.3 mm (from Z=0.0 to Z=84.5).\n9. Finish turn diameter Ø39.2 mm over length 30.4 mm (from Z=0.0 to Z=61.2).\n10. Finish turn diameter Ø30.0 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01557", "images": ["images/Shaft_01557.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.1 mm and length at least 261.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 147.2 mm (from Z=0.0 to Z=229.2).\n10. Finish turn diameter Ø48.1 mm over length 82.0 mm (from Z=0.0 to Z=82.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01027", "images": ["images/Shaft_01027.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.9 mm and length at least 67.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03241", "images": ["images/Shaft_03241.png", "detail_png/Shaft_03241_length.png", "detail_png/Shaft_03241_diam.png", "detail_png/Shaft_03241_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.8 mm and length at least 285.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 234.7 mm (from Z=0.0 to Z=234.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01975", "images": ["images/Shaft_01975.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.5 mm and length at least 320.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.5 mm over length 174.0 mm (from Z=0.0 to Z=174.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.1 mm over length 65.5 mm (from Z=0.0 to Z=141.3).\n10. Finish turn diameter Ø30.0 mm over length 75.8 mm (from Z=0.0 to Z=75.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00246", "images": ["images/Shaft_00246.png", "detail_png/Shaft_00246_length.png", "detail_png/Shaft_00246_diam.png", "detail_png/Shaft_00246_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.3 mm and length at least 193.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 95.6 mm (from Z=0.0 to Z=95.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.5 mm over length 19.4 mm (from Z=0.0 to Z=92.9).\n9. Finish turn diameter Ø51.7 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00002", "images": ["images/Shaft_00002.png", "detail_png/Shaft_00002_length.png", "detail_png/Shaft_00002_diam.png", "detail_png/Shaft_00002_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.9 mm and length at least 71.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.5 mm over length 23.6 mm (from Z=0.0 to Z=61.5).\n9. Finish turn diameter Ø59.0 mm over length 7.1 mm (from Z=0.0 to Z=37.9).\n10. Finish turn diameter Ø56.0 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00685", "images": ["images/Shaft_00685.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.6 mm and length at least 181.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 52.9 mm (from Z=0.0 to Z=52.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.3 mm over length 49.5 mm (from Z=0.0 to Z=123.7).\n9. Finish turn diameter Ø33.9 mm over length 26.1 mm (from Z=0.0 to Z=74.2).\n10. Finish turn diameter Ø30.0 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01184", "images": ["images/Shaft_01184.png", "detail_png/Shaft_01184_length.png", "detail_png/Shaft_01184_diam.png", "detail_png/Shaft_01184_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.5 mm and length at least 275.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.5 mm over length 104.1 mm (from Z=0.0 to Z=104.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.0 mm over length 29.0 mm (from Z=0.0 to Z=165.9).\n10. Finish turn diameter Ø33.3 mm over length 83.8 mm (from Z=0.0 to Z=136.9).\n11. Finish turn diameter Ø30.0 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03359", "images": ["images/Shaft_03359.png", "detail_png/Shaft_03359_length.png", "detail_png/Shaft_03359_diam.png", "detail_png/Shaft_03359_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.8 mm and length at least 239.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.8 mm over length 85.6 mm (from Z=0.0 to Z=160.9).\n10. Finish turn diameter Ø30.0 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00004", "images": ["images/Shaft_00004.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 93.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.4 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03108", "images": ["images/Shaft_03108.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.7 mm and length at least 167.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 116.9 mm (from Z=0.0 to Z=116.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04430", "images": ["images/Shaft_04430.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.4 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.4 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 62.4 mm (from Z=0.0 to Z=95.2).\n9. Finish turn diameter Ø41.8 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04493", "images": ["images/Shaft_04493.png", "detail_png/Shaft_04493_length.png", "detail_png/Shaft_04493_diam.png", "detail_png/Shaft_04493_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.4 mm and length at least 91.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 26.0 mm (from Z=0.0 to Z=76.3).\n9. Finish turn diameter Ø30.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02199", "images": ["images/Shaft_02199.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.1 mm and length at least 176.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.8 mm over length 32.0 mm (from Z=0.0 to Z=108.9).\n9. Finish turn diameter Ø55.6 mm over length 66.7 mm (from Z=0.0 to Z=76.9).\n10. Finish turn diameter Ø36.2 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02204", "images": ["images/Shaft_02204.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.8 mm and length at least 152.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 54.0 mm (from Z=0.0 to Z=129.7).\n9. Finish turn diameter Ø42.8 mm over length 40.4 mm (from Z=0.0 to Z=75.7).\n10. Finish turn diameter Ø38.7 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01529", "images": ["images/Shaft_01529.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.7 mm and length at least 295.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 85.1 mm (from Z=0.0 to Z=85.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.5 mm over length 102.5 mm (from Z=0.0 to Z=205.6).\n10. Finish turn diameter Ø30.0 mm over length 103.1 mm (from Z=0.0 to Z=103.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04732", "images": ["images/Shaft_04732.png", "detail_png/Shaft_04732_length.png", "detail_png/Shaft_04732_diam.png", "detail_png/Shaft_04732_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.4 mm and length at least 302.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 249.4 mm (from Z=0.0 to Z=249.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03176", "images": ["images/Shaft_03176.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.5 mm and length at least 220.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.1 mm (from Z=0.0 to Z=148.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03539", "images": ["images/Shaft_03539.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.2 mm and length at least 287.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 86.2 mm (from Z=0.0 to Z=86.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 196.7 mm (from Z=0.0 to Z=196.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04166", "images": ["images/Shaft_04166.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.6 mm and length at least 247.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 96.8 mm (from Z=0.0 to Z=96.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.3 mm over length 81.9 mm (from Z=0.0 to Z=145.3).\n10. Finish turn diameter Ø39.5 mm over length 27.1 mm (from Z=0.0 to Z=63.4).\n11. Finish turn diameter Ø32.3 mm over length 21.8 mm (from Z=0.0 to Z=36.3).\n12. Finish turn diameter Ø30.0 mm over length 14.5 mm (from Z=0.0 to Z=14.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03932", "images": ["images/Shaft_03932.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 92.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 58.7 mm (from Z=0.0 to Z=58.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.9 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01666", "images": ["images/Shaft_01666.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø34.2 mm and length at least 95.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04449", "images": ["images/Shaft_04449.png", "detail_png/Shaft_04449_length.png", "detail_png/Shaft_04449_diam.png", "detail_png/Shaft_04449_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.8 mm and length at least 136.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.2 mm over length 19.7 mm (from Z=0.0 to Z=89.4).\n9. Finish turn diameter Ø30.0 mm over length 69.7 mm (from Z=0.0 to Z=69.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00514", "images": ["images/Shaft_00514.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 262.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 199.7 mm (from Z=0.0 to Z=199.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 57.5 mm (from Z=0.0 to Z=57.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04927", "images": ["images/Shaft_04927.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.4 mm and length at least 117.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04827", "images": ["images/Shaft_04827.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 226.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 190.8 mm (from Z=0.0 to Z=190.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.1 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01102", "images": ["images/Shaft_01102.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.2 mm and length at least 319.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.9 mm over length 15.9 mm (from Z=0.0 to Z=266.2).\n10. Finish turn diameter Ø30.0 mm over length 250.3 mm (from Z=0.0 to Z=250.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02587", "images": ["images/Shaft_02587.png", "detail_png/Shaft_02587_length.png", "detail_png/Shaft_02587_diam.png", "detail_png/Shaft_02587_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.7 mm and length at least 315.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.0 mm over length 121.9 mm (from Z=0.0 to Z=289.5).\n10. Finish turn diameter Ø48.9 mm over length 27.6 mm (from Z=0.0 to Z=167.6).\n11. Finish turn diameter Ø34.0 mm over length 90.7 mm (from Z=0.0 to Z=140.0).\n12. Finish turn diameter Ø30.0 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03363", "images": ["images/Shaft_03363.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.9 mm and length at least 213.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.9 mm over length 72.0 mm (from Z=0.0 to Z=161.4).\n10. Finish turn diameter Ø59.6 mm over length 34.9 mm (from Z=0.0 to Z=89.4).\n11. Finish turn diameter Ø52.7 mm over length 40.7 mm (from Z=0.0 to Z=54.5).\n12. Finish turn diameter Ø39.9 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03541", "images": ["images/Shaft_03541.png", "detail_png/Shaft_03541_length.png", "detail_png/Shaft_03541_diam.png", "detail_png/Shaft_03541_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.6 mm and length at least 98.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.6 mm over length 7.0 mm (from Z=0.0 to Z=80.9).\n9. Finish turn diameter Ø35.0 mm over length 23.6 mm (from Z=0.0 to Z=73.9).\n10. Finish turn diameter Ø30.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03362", "images": ["images/Shaft_03362.png", "detail_png/Shaft_03362_length.png", "detail_png/Shaft_03362_diam.png", "detail_png/Shaft_03362_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.2 mm and length at least 282.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.8 mm over length 95.0 mm (from Z=0.0 to Z=211.5).\n10. Finish turn diameter Ø30.0 mm over length 116.5 mm (from Z=0.0 to Z=116.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03627", "images": ["images/Shaft_03627.png", "detail_png/Shaft_03627_length.png", "detail_png/Shaft_03627_diam.png", "detail_png/Shaft_03627_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.9 mm and length at least 84.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.9 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.3 mm over length 14.1 mm (from Z=0.0 to Z=63.7).\n9. Finish turn diameter Ø40.7 mm over length 20.3 mm (from Z=0.0 to Z=49.6).\n10. Finish turn diameter Ø31.5 mm over length 19.3 mm (from Z=0.0 to Z=29.3).\n11. Finish turn diameter Ø30.0 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03307", "images": ["images/Shaft_03307.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 101.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 86.7 mm (from Z=0.0 to Z=86.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.3 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03130", "images": ["images/Shaft_03130.png", "detail_png/Shaft_03130_length.png", "detail_png/Shaft_03130_diam.png", "detail_png/Shaft_03130_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.3 mm and length at least 99.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 70.8 mm (from Z=0.0 to Z=70.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04966", "images": ["images/Shaft_04966.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.5 mm and length at least 126.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 24.7 mm (from Z=0.0 to Z=102.8).\n9. Finish turn diameter Ø43.6 mm over length 20.7 mm (from Z=0.0 to Z=78.1).\n10. Finish turn diameter Ø30.0 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01303", "images": ["images/Shaft_01303.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.9 mm and length at least 69.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02544", "images": ["images/Shaft_02544.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.5 mm and length at least 135.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.6 mm over length 72.0 mm (from Z=0.0 to Z=88.0).\n9. Finish turn diameter Ø53.8 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02757", "images": ["images/Shaft_02757.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 162.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.5 mm (from Z=0.0 to Z=85.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.8 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00471", "images": ["images/Shaft_00471.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.1 mm and length at least 94.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 9.9 mm (from Z=0.0 to Z=49.1).\n9. Finish turn diameter Ø43.2 mm over length 14.0 mm (from Z=0.0 to Z=39.2).\n10. Finish turn diameter Ø30.0 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04859", "images": ["images/Shaft_04859.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.7 mm and length at least 67.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.6 mm over length 15.8 mm (from Z=0.0 to Z=57.1).\n9. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03781", "images": ["images/Shaft_03781.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.2 mm and length at least 195.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 150.5 mm (from Z=0.0 to Z=150.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04756", "images": ["images/Shaft_04756.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.1 mm and length at least 282.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.1 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 123.7 mm (from Z=0.0 to Z=188.1).\n10. Finish turn diameter Ø30.0 mm over length 64.4 mm (from Z=0.0 to Z=64.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02801", "images": ["images/Shaft_02801.png", "detail_png/Shaft_02801_length.png", "detail_png/Shaft_02801_diam.png", "detail_png/Shaft_02801_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.6 mm and length at least 277.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 51.4 mm (from Z=0.0 to Z=51.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 7.3 mm (from Z=0.0 to Z=221.1).\n10. Finish turn diameter Ø38.8 mm over length 20.1 mm (from Z=0.0 to Z=213.8).\n11. Finish turn diameter Ø33.2 mm over length 84.1 mm (from Z=0.0 to Z=193.7).\n12. Finish turn diameter Ø30.0 mm over length 109.6 mm (from Z=0.0 to Z=109.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03048", "images": ["images/Shaft_03048.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.4 mm and length at least 296.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 31.3 mm (from Z=0.0 to Z=185.8).\n10. Finish turn diameter Ø53.9 mm over length 87.4 mm (from Z=0.0 to Z=154.5).\n11. Finish turn diameter Ø37.6 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04235", "images": ["images/Shaft_04235.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.7 mm and length at least 130.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.7 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.9 mm over length 30.4 mm (from Z=0.0 to Z=111.0).\n9. Finish turn diameter Ø30.1 mm over length 21.6 mm (from Z=0.0 to Z=80.6).\n10. Finish turn diameter Ø30.0 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00829", "images": ["images/Shaft_00829.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.4 mm and length at least 302.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 103.4 mm (from Z=0.0 to Z=103.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.5 mm over length 116.8 mm (from Z=0.0 to Z=194.4).\n10. Finish turn diameter Ø37.9 mm over length 77.6 mm (from Z=0.0 to Z=77.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00212", "images": ["images/Shaft_00212.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.8 mm and length at least 160.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.8 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.1 mm over length 61.5 mm (from Z=0.0 to Z=134.3).\n9. Finish turn diameter Ø68.7 mm over length 55.0 mm (from Z=0.0 to Z=72.8).\n10. Finish turn diameter Ø59.2 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02272", "images": ["images/Shaft_02272.png", "detail_png/Shaft_02272_length.png", "detail_png/Shaft_02272_diam.png", "detail_png/Shaft_02272_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.9 mm and length at least 306.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.6 mm over length 88.6 mm (from Z=0.0 to Z=281.3).\n10. Finish turn diameter Ø30.0 mm over length 192.7 mm (from Z=0.0 to Z=192.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01538", "images": ["images/Shaft_01538.png", "detail_png/Shaft_01538_length.png", "detail_png/Shaft_01538_diam.png", "detail_png/Shaft_01538_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.5 mm and length at least 299.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 103.6 mm (from Z=0.0 to Z=103.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 83.7 mm (from Z=0.0 to Z=191.0).\n10. Finish turn diameter Ø32.3 mm over length 27.5 mm (from Z=0.0 to Z=107.3).\n11. Finish turn diameter Ø30.0 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02472", "images": ["images/Shaft_02472.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.4 mm and length at least 165.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.3 mm over length 84.0 mm (from Z=0.0 to Z=102.1).\n9. Finish turn diameter Ø37.9 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01327", "images": ["images/Shaft_01327.png", "detail_png/Shaft_01327_length.png", "detail_png/Shaft_01327_diam.png", "detail_png/Shaft_01327_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.7 mm and length at least 89.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.1 mm over length 15.2 mm (from Z=0.0 to Z=62.0).\n9. Finish turn diameter Ø41.0 mm over length 8.9 mm (from Z=0.0 to Z=46.8).\n10. Finish turn diameter Ø30.1 mm over length 20.6 mm (from Z=0.0 to Z=37.9).\n11. Finish turn diameter Ø30.0 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01690", "images": ["images/Shaft_01690.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.6 mm and length at least 133.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.4 mm over length 33.9 mm (from Z=0.0 to Z=94.1).\n9. Finish turn diameter Ø30.0 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04260", "images": ["images/Shaft_04260.png", "detail_png/Shaft_04260_length.png", "detail_png/Shaft_04260_diam.png", "detail_png/Shaft_04260_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.8 mm and length at least 207.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.7 mm (from Z=0.0 to Z=177.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01310", "images": ["images/Shaft_01310.png", "detail_png/Shaft_01310_length.png", "detail_png/Shaft_01310_diam.png", "detail_png/Shaft_01310_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.8 mm and length at least 270.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.3 mm (from Z=0.0 to Z=224.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03562", "images": ["images/Shaft_03562.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.1 mm and length at least 303.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 88.9 mm (from Z=0.0 to Z=88.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.7 mm over length 17.6 mm (from Z=0.0 to Z=209.3).\n10. Finish turn diameter Ø31.5 mm over length 14.0 mm (from Z=0.0 to Z=191.7).\n11. Finish turn diameter Ø30.0 mm over length 177.7 mm (from Z=0.0 to Z=177.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03245", "images": ["images/Shaft_03245.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.4 mm and length at least 254.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 238.4 mm (from Z=0.0 to Z=238.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03420", "images": ["images/Shaft_03420.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.5 mm and length at least 177.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 28.9 mm (from Z=0.0 to Z=152.3).\n9. Finish turn diameter Ø42.3 mm over length 58.6 mm (from Z=0.0 to Z=123.4).\n10. Finish turn diameter Ø30.3 mm over length 53.1 mm (from Z=0.0 to Z=64.8).\n11. Finish turn diameter Ø30.0 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03758", "images": ["images/Shaft_03758.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.5 mm and length at least 181.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.9 mm over length 49.2 mm (from Z=0.0 to Z=165.5).\n9. Finish turn diameter Ø50.6 mm over length 55.3 mm (from Z=0.0 to Z=116.3).\n10. Finish turn diameter Ø36.9 mm over length 35.4 mm (from Z=0.0 to Z=61.0).\n11. Finish turn diameter Ø30.0 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00111", "images": ["images/Shaft_00111.png", "detail_png/Shaft_00111_length.png", "detail_png/Shaft_00111_diam.png", "detail_png/Shaft_00111_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.3 mm and length at least 73.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04174", "images": ["images/Shaft_04174.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.6 mm and length at least 115.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.0 mm over length 44.5 mm (from Z=0.0 to Z=69.8).\n9. Finish turn diameter Ø32.6 mm over length 25.3 mm (from Z=0.0 to Z=25.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02378", "images": ["images/Shaft_02378.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.3 mm and length at least 310.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.5 mm over length 84.4 mm (from Z=0.0 to Z=267.8).\n10. Finish turn diameter Ø30.0 mm over length 183.4 mm (from Z=0.0 to Z=183.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00241", "images": ["images/Shaft_00241.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.0 mm and length at least 318.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.5 mm over length 71.2 mm (from Z=0.0 to Z=229.8).\n10. Finish turn diameter Ø51.7 mm over length 61.2 mm (from Z=0.0 to Z=158.6).\n11. Finish turn diameter Ø39.3 mm over length 13.4 mm (from Z=0.0 to Z=97.4).\n12. Finish turn diameter Ø33.5 mm over length 84.0 mm (from Z=0.0 to Z=84.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04665", "images": ["images/Shaft_04665.png", "detail_png/Shaft_04665_length.png", "detail_png/Shaft_04665_diam.png", "detail_png/Shaft_04665_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.6 mm and length at least 187.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.6 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 44.2 mm (from Z=0.0 to Z=133.8).\n9. Finish turn diameter Ø34.4 mm over length 20.5 mm (from Z=0.0 to Z=89.6).\n10. Finish turn diameter Ø30.2 mm over length 29.9 mm (from Z=0.0 to Z=69.1).\n11. Finish turn diameter Ø30.0 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03645", "images": ["images/Shaft_03645.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.1 mm and length at least 276.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 105.5 mm (from Z=0.0 to Z=105.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 62.8 mm (from Z=0.0 to Z=165.8).\n10. Finish turn diameter Ø32.3 mm over length 103.0 mm (from Z=0.0 to Z=103.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01256", "images": ["images/Shaft_01256.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.7 mm and length at least 233.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.7 mm over length 74.8 mm (from Z=0.0 to Z=74.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.7 mm over length 28.3 mm (from Z=0.0 to Z=154.0).\n10. Finish turn diameter Ø30.0 mm over length 125.7 mm (from Z=0.0 to Z=125.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02443", "images": ["images/Shaft_02443.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.2 mm and length at least 140.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 109.0 mm (from Z=0.0 to Z=109.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03290", "images": ["images/Shaft_03290.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 144.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 110.1 mm (from Z=0.0 to Z=110.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.3 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03043", "images": ["images/Shaft_03043.png", "detail_png/Shaft_03043_length.png", "detail_png/Shaft_03043_diam.png", "detail_png/Shaft_03043_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.4 mm and length at least 105.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.7 mm over length 22.8 mm (from Z=0.0 to Z=93.6).\n9. Finish turn diameter Ø55.8 mm over length 23.2 mm (from Z=0.0 to Z=70.8).\n10. Finish turn diameter Ø48.5 mm over length 41.4 mm (from Z=0.0 to Z=47.6).\n11. Finish turn diameter Ø36.1 mm over length 6.2 mm (from Z=0.0 to Z=6.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00748", "images": ["images/Shaft_00748.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 147.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.3 mm (from Z=0.0 to Z=107.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00589", "images": ["images/Shaft_00589.png", "detail_png/Shaft_00589_length.png", "detail_png/Shaft_00589_diam.png", "detail_png/Shaft_00589_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.4 mm and length at least 92.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 6.4 mm (from Z=0.0 to Z=6.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.1 mm over length 14.4 mm (from Z=0.0 to Z=80.6).\n9. Finish turn diameter Ø34.9 mm over length 9.1 mm (from Z=0.0 to Z=66.2).\n10. Finish turn diameter Ø30.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04020", "images": ["images/Shaft_04020.png", "detail_png/Shaft_04020_length.png", "detail_png/Shaft_04020_diam.png", "detail_png/Shaft_04020_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.5 mm and length at least 174.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.1 mm over length 45.3 mm (from Z=0.0 to Z=119.9).\n9. Finish turn diameter Ø30.0 mm over length 74.6 mm (from Z=0.0 to Z=74.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00688", "images": ["images/Shaft_00688.png", "detail_png/Shaft_00688_length.png", "detail_png/Shaft_00688_diam.png", "detail_png/Shaft_00688_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.2 mm and length at least 324.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.9 mm over length 27.0 mm (from Z=0.0 to Z=240.4).\n10. Finish turn diameter Ø30.0 mm over length 213.4 mm (from Z=0.0 to Z=213.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02444", "images": ["images/Shaft_02444.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.0 mm and length at least 148.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 12.6 mm (from Z=0.0 to Z=12.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.9 mm over length 67.2 mm (from Z=0.0 to Z=130.6).\n9. Finish turn diameter Ø30.0 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00469", "images": ["images/Shaft_00469.png", "detail_png/Shaft_00469_length.png", "detail_png/Shaft_00469_diam.png", "detail_png/Shaft_00469_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.1 mm and length at least 269.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 56.8 mm (from Z=0.0 to Z=188.8).\n10. Finish turn diameter Ø41.9 mm over length 51.9 mm (from Z=0.0 to Z=132.0).\n11. Finish turn diameter Ø30.0 mm over length 80.1 mm (from Z=0.0 to Z=80.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04980", "images": ["images/Shaft_04980.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.4 mm and length at least 258.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 59.2 mm (from Z=0.0 to Z=194.4).\n10. Finish turn diameter Ø33.7 mm over length 18.7 mm (from Z=0.0 to Z=135.2).\n11. Finish turn diameter Ø30.0 mm over length 116.5 mm (from Z=0.0 to Z=116.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01053", "images": ["images/Shaft_01053.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.5 mm and length at least 210.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 28.7 mm (from Z=0.0 to Z=173.1).\n10. Finish turn diameter Ø44.9 mm over length 25.2 mm (from Z=0.0 to Z=144.4).\n11. Finish turn diameter Ø37.0 mm over length 31.5 mm (from Z=0.0 to Z=119.2).\n12. Finish turn diameter Ø30.0 mm over length 87.7 mm (from Z=0.0 to Z=87.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02928", "images": ["images/Shaft_02928.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.0 mm and length at least 173.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.5 mm over length 36.8 mm (from Z=0.0 to Z=117.2).\n9. Finish turn diameter Ø36.2 mm over length 26.0 mm (from Z=0.0 to Z=80.4).\n10. Finish turn diameter Ø30.0 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04906", "images": ["images/Shaft_04906.png", "detail_png/Shaft_04906_length.png", "detail_png/Shaft_04906_diam.png", "detail_png/Shaft_04906_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 184.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 155.8 mm (from Z=0.0 to Z=155.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02162", "images": ["images/Shaft_02162.png", "detail_png/Shaft_02162_length.png", "detail_png/Shaft_02162_diam.png", "detail_png/Shaft_02162_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 324.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 235.4 mm (from Z=0.0 to Z=235.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.9 mm over length 84.2 mm (from Z=0.0 to Z=84.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00098", "images": ["images/Shaft_00098.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.2 mm and length at least 276.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 124.0 mm (from Z=0.0 to Z=124.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.0 mm over length 49.9 mm (from Z=0.0 to Z=147.0).\n10. Finish turn diameter Ø39.5 mm over length 34.9 mm (from Z=0.0 to Z=97.1).\n11. Finish turn diameter Ø30.0 mm over length 62.2 mm (from Z=0.0 to Z=62.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02425", "images": ["images/Shaft_02425.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.1 mm and length at least 257.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 29.2 mm (from Z=0.0 to Z=224.1).\n10. Finish turn diameter Ø30.8 mm over length 22.6 mm (from Z=0.0 to Z=194.9).\n11. Finish turn diameter Ø30.0 mm over length 172.3 mm (from Z=0.0 to Z=172.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03500", "images": ["images/Shaft_03500.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.0 mm and length at least 230.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.0 mm over length 86.1 mm (from Z=0.0 to Z=86.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.2 mm over length 104.5 mm (from Z=0.0 to Z=139.1).\n10. Finish turn diameter Ø35.8 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01790", "images": ["images/Shaft_01790.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 68.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.8 mm over length 17.5 mm (from Z=0.0 to Z=46.9).\n9. Finish turn diameter Ø30.0 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04213", "images": ["images/Shaft_04213.png", "detail_png/Shaft_04213_length.png", "detail_png/Shaft_04213_diam.png", "detail_png/Shaft_04213_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.1 mm and length at least 212.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 82.3 mm (from Z=0.0 to Z=82.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.8 mm over length 78.4 mm (from Z=0.0 to Z=125.0).\n10. Finish turn diameter Ø30.0 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02355", "images": ["images/Shaft_02355.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.7 mm and length at least 115.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.3 mm over length 18.8 mm (from Z=0.0 to Z=90.9).\n9. Finish turn diameter Ø57.9 mm over length 52.7 mm (from Z=0.0 to Z=72.1).\n10. Finish turn diameter Ø50.9 mm over length 6.1 mm (from Z=0.0 to Z=19.4).\n11. Finish turn diameter Ø46.8 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03064", "images": ["images/Shaft_03064.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.4 mm and length at least 77.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.7 mm over length 9.1 mm (from Z=0.0 to Z=54.6).\n9. Finish turn diameter Ø43.2 mm over length 5.0 mm (from Z=0.0 to Z=45.5).\n10. Finish turn diameter Ø34.5 mm over length 19.6 mm (from Z=0.0 to Z=40.5).\n11. Finish turn diameter Ø30.0 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04790", "images": ["images/Shaft_04790.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.6 mm and length at least 140.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.0 mm over length 31.0 mm (from Z=0.0 to Z=94.0).\n9. Finish turn diameter Ø30.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02402", "images": ["images/Shaft_02402.png", "detail_png/Shaft_02402_length.png", "detail_png/Shaft_02402_diam.png", "detail_png/Shaft_02402_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 275.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 238.2 mm (from Z=0.0 to Z=238.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.9 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03339", "images": ["images/Shaft_03339.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.6 mm and length at least 94.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 16.7 mm (from Z=0.0 to Z=74.0).\n9. Finish turn diameter Ø40.2 mm over length 29.3 mm (from Z=0.0 to Z=57.3).\n10. Finish turn diameter Ø30.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03085", "images": ["images/Shaft_03085.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.5 mm and length at least 191.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.5 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.2 mm over length 31.4 mm (from Z=0.0 to Z=136.5).\n9. Finish turn diameter Ø31.5 mm over length 41.4 mm (from Z=0.0 to Z=105.1).\n10. Finish turn diameter Ø30.0 mm over length 63.7 mm (from Z=0.0 to Z=63.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00346", "images": ["images/Shaft_00346.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.6 mm and length at least 211.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.6 mm over length 101.9 mm (from Z=0.0 to Z=101.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.1 mm over length 48.1 mm (from Z=0.0 to Z=104.7).\n10. Finish turn diameter Ø46.7 mm over length 56.6 mm (from Z=0.0 to Z=56.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03875", "images": ["images/Shaft_03875.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.1 mm and length at least 197.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.3 mm over length 7.7 mm (from Z=0.0 to Z=112.3).\n10. Finish turn diameter Ø33.1 mm over length 78.9 mm (from Z=0.0 to Z=104.6).\n11. Finish turn diameter Ø30.0 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02434", "images": ["images/Shaft_02434.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.0 mm and length at least 197.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.3 mm over length 20.9 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø51.0 mm over length 5.0 mm (from Z=0.0 to Z=125.6).\n11. Finish turn diameter Ø42.3 mm over length 34.3 mm (from Z=0.0 to Z=120.6).\n12. Finish turn diameter Ø32.5 mm over length 36.5 mm (from Z=0.0 to Z=86.3).\n13. Finish turn diameter Ø30.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00842", "images": ["images/Shaft_00842.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.2 mm and length at least 90.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 11.3 mm (from Z=0.0 to Z=55.6).\n9. Finish turn diameter Ø32.7 mm over length 23.5 mm (from Z=0.0 to Z=44.3).\n10. Finish turn diameter Ø30.0 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01126", "images": ["images/Shaft_01126.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.2 mm and length at least 89.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04801", "images": ["images/Shaft_04801.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.7 mm and length at least 115.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.1 mm over length 24.8 mm (from Z=0.0 to Z=77.9).\n9. Finish turn diameter Ø57.1 mm over length 32.3 mm (from Z=0.0 to Z=53.1).\n10. Finish turn diameter Ø40.3 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00736", "images": ["images/Shaft_00736.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.6 mm and length at least 70.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.0 mm over length 7.5 mm (from Z=0.0 to Z=54.4).\n9. Finish turn diameter Ø66.3 mm over length 10.2 mm (from Z=0.0 to Z=46.9).\n10. Finish turn diameter Ø57.6 mm over length 7.3 mm (from Z=0.0 to Z=36.7).\n11. Finish turn diameter Ø42.1 mm over length 15.0 mm (from Z=0.0 to Z=29.4).\n12. Finish turn diameter Ø32.6 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02178", "images": ["images/Shaft_02178.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.2 mm and length at least 116.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.7 mm over length 38.6 mm (from Z=0.0 to Z=87.3).\n9. Finish turn diameter Ø31.2 mm over length 15.6 mm (from Z=0.0 to Z=48.7).\n10. Finish turn diameter Ø30.0 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04473", "images": ["images/Shaft_04473.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.2 mm and length at least 307.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.1 mm over length 73.3 mm (from Z=0.0 to Z=258.6).\n10. Finish turn diameter Ø30.8 mm over length 56.1 mm (from Z=0.0 to Z=185.3).\n11. Finish turn diameter Ø30.0 mm over length 129.2 mm (from Z=0.0 to Z=129.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03213", "images": ["images/Shaft_03213.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 98.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 78.2 mm (from Z=0.0 to Z=78.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.1 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02058", "images": ["images/Shaft_02058.png", "detail_png/Shaft_02058_length.png", "detail_png/Shaft_02058_diam.png", "detail_png/Shaft_02058_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 97.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.3 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03354", "images": ["images/Shaft_03354.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.1 mm and length at least 256.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 70.9 mm (from Z=0.0 to Z=70.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 47.5 mm (from Z=0.0 to Z=180.5).\n10. Finish turn diameter Ø30.0 mm over length 133.0 mm (from Z=0.0 to Z=133.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02914", "images": ["images/Shaft_02914.png", "detail_png/Shaft_02914_length.png", "detail_png/Shaft_02914_diam.png", "detail_png/Shaft_02914_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.3 mm and length at least 69.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.3 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.6 mm over length 30.6 mm (from Z=0.0 to Z=35.6).\n9. Finish turn diameter Ø57.1 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03116", "images": ["images/Shaft_03116.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 147.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.7 mm over length 72.2 mm (from Z=0.0 to Z=72.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03429", "images": ["images/Shaft_03429.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.9 mm and length at least 83.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 8.2 mm (from Z=0.0 to Z=53.6).\n9. Finish turn diameter Ø37.3 mm over length 19.7 mm (from Z=0.0 to Z=45.4).\n10. Finish turn diameter Ø30.0 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02319", "images": ["images/Shaft_02319.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.2 mm and length at least 130.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.2 mm over length 55.9 mm (from Z=0.0 to Z=55.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04189", "images": ["images/Shaft_04189.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.6 mm and length at least 303.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.9 mm over length 69.7 mm (from Z=0.0 to Z=252.1).\n10. Finish turn diameter Ø30.0 mm over length 182.4 mm (from Z=0.0 to Z=182.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02341", "images": ["images/Shaft_02341.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.4 mm and length at least 185.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 44.9 mm (from Z=0.0 to Z=163.8).\n9. Finish turn diameter Ø49.8 mm over length 22.9 mm (from Z=0.0 to Z=118.9).\n10. Finish turn diameter Ø35.2 mm over length 46.7 mm (from Z=0.0 to Z=96.0).\n11. Finish turn diameter Ø30.0 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01265", "images": ["images/Shaft_01265.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.7 mm and length at least 250.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 116.1 mm (from Z=0.0 to Z=116.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.9 mm over length 29.0 mm (from Z=0.0 to Z=129.2).\n10. Finish turn diameter Ø38.3 mm over length 100.2 mm (from Z=0.0 to Z=100.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03937", "images": ["images/Shaft_03937.png", "detail_png/Shaft_03937_length.png", "detail_png/Shaft_03937_diam.png", "detail_png/Shaft_03937_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 139.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 102.6 mm (from Z=0.0 to Z=102.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.1 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00678", "images": ["images/Shaft_00678.png", "detail_png/Shaft_00678_length.png", "detail_png/Shaft_00678_diam.png", "detail_png/Shaft_00678_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.3 mm and length at least 235.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.7 mm over length 56.0 mm (from Z=0.0 to Z=207.0).\n10. Finish turn diameter Ø34.9 mm over length 39.8 mm (from Z=0.0 to Z=151.0).\n11. Finish turn diameter Ø30.0 mm over length 111.2 mm (from Z=0.0 to Z=111.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03844", "images": ["images/Shaft_03844.png", "detail_png/Shaft_03844_length.png", "detail_png/Shaft_03844_diam.png", "detail_png/Shaft_03844_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.5 mm and length at least 180.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.9 mm over length 50.9 mm (from Z=0.0 to Z=149.3).\n9. Finish turn diameter Ø38.0 mm over length 17.8 mm (from Z=0.0 to Z=98.4).\n10. Finish turn diameter Ø30.0 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03591", "images": ["images/Shaft_03591.png", "detail_png/Shaft_03591_length.png", "detail_png/Shaft_03591_diam.png", "detail_png/Shaft_03591_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.4 mm and length at least 318.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 296.8 mm (from Z=0.0 to Z=296.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01814", "images": ["images/Shaft_01814.png", "detail_png/Shaft_01814_length.png", "detail_png/Shaft_01814_diam.png", "detail_png/Shaft_01814_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.2 mm and length at least 251.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 75.8 mm (from Z=0.0 to Z=75.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.9 mm over length 78.0 mm (from Z=0.0 to Z=170.5).\n10. Finish turn diameter Ø31.7 mm over length 49.3 mm (from Z=0.0 to Z=92.5).\n11. Finish turn diameter Ø30.0 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00187", "images": ["images/Shaft_00187.png", "detail_png/Shaft_00187_length.png", "detail_png/Shaft_00187_diam.png", "detail_png/Shaft_00187_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.5 mm and length at least 225.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 112.9 mm (from Z=0.0 to Z=112.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.1 mm over length 93.9 mm (from Z=0.0 to Z=107.7).\n10. Finish turn diameter Ø54.9 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04541", "images": ["images/Shaft_04541.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.1 mm and length at least 182.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.1 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.2 mm (from Z=0.0 to Z=166.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02334", "images": ["images/Shaft_02334.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.3 mm and length at least 205.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.3 mm over length 80.8 mm (from Z=0.0 to Z=80.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 32.2 mm (from Z=0.0 to Z=119.9).\n10. Finish turn diameter Ø30.0 mm over length 87.7 mm (from Z=0.0 to Z=87.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01619", "images": ["images/Shaft_01619.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.7 mm and length at least 252.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 136.5 mm (from Z=0.0 to Z=136.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.9 mm over length 28.9 mm (from Z=0.0 to Z=111.3).\n10. Finish turn diameter Ø63.8 mm over length 14.7 mm (from Z=0.0 to Z=82.4).\n11. Finish turn diameter Ø50.1 mm over length 67.7 mm (from Z=0.0 to Z=67.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03468", "images": ["images/Shaft_03468.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.2 mm and length at least 290.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.2 mm over length 76.2 mm (from Z=0.0 to Z=76.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 43.6 mm (from Z=0.0 to Z=209.6).\n10. Finish turn diameter Ø41.7 mm over length 35.2 mm (from Z=0.0 to Z=166.0).\n11. Finish turn diameter Ø35.5 mm over length 56.0 mm (from Z=0.0 to Z=130.8).\n12. Finish turn diameter Ø30.0 mm over length 74.8 mm (from Z=0.0 to Z=74.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04940", "images": ["images/Shaft_04940.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.8 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.7 mm over length 35.3 mm (from Z=0.0 to Z=117.9).\n9. Finish turn diameter Ø34.6 mm over length 46.8 mm (from Z=0.0 to Z=82.6).\n10. Finish turn diameter Ø30.0 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03842", "images": ["images/Shaft_03842.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.1 mm and length at least 245.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.5 mm over length 27.7 mm (from Z=0.0 to Z=150.6).\n10. Finish turn diameter Ø53.4 mm over length 50.5 mm (from Z=0.0 to Z=122.9).\n11. Finish turn diameter Ø40.5 mm over length 28.7 mm (from Z=0.0 to Z=72.4).\n12. Finish turn diameter Ø30.0 mm over length 43.7 mm (from Z=0.0 to Z=43.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04012", "images": ["images/Shaft_04012.png", "detail_png/Shaft_04012_length.png", "detail_png/Shaft_04012_diam.png", "detail_png/Shaft_04012_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.3 mm and length at least 300.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 39.4 mm (from Z=0.0 to Z=39.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.6 mm over length 98.4 mm (from Z=0.0 to Z=256.0).\n10. Finish turn diameter Ø63.4 mm over length 94.2 mm (from Z=0.0 to Z=157.6).\n11. Finish turn diameter Ø57.2 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01332", "images": ["images/Shaft_01332.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.3 mm and length at least 208.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.3 mm over length 89.9 mm (from Z=0.0 to Z=89.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.1 mm over length 61.7 mm (from Z=0.0 to Z=113.7).\n10. Finish turn diameter Ø35.6 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00610", "images": ["images/Shaft_00610.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 216.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.4 mm (from Z=0.0 to Z=168.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.5 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01839", "images": ["images/Shaft_01839.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.4 mm and length at least 293.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 119.6 mm (from Z=0.0 to Z=119.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.7 mm (from Z=0.0 to Z=168.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02632", "images": ["images/Shaft_02632.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.2 mm and length at least 212.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.2 mm over length 11.1 mm (from Z=0.0 to Z=171.6).\n10. Finish turn diameter Ø63.2 mm over length 94.5 mm (from Z=0.0 to Z=160.5).\n11. Finish turn diameter Ø45.2 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03298", "images": ["images/Shaft_03298.png", "detail_png/Shaft_03298_length.png", "detail_png/Shaft_03298_diam.png", "detail_png/Shaft_03298_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.9 mm and length at least 297.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.5 mm over length 78.4 mm (from Z=0.0 to Z=269.1).\n10. Finish turn diameter Ø30.0 mm over length 190.7 mm (from Z=0.0 to Z=190.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04188", "images": ["images/Shaft_04188.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.2 mm and length at least 219.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 33.5 mm (from Z=0.0 to Z=134.2).\n10. Finish turn diameter Ø30.0 mm over length 100.7 mm (from Z=0.0 to Z=100.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00567", "images": ["images/Shaft_00567.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.7 mm and length at least 306.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 120.4 mm (from Z=0.0 to Z=120.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 180.7 mm (from Z=0.0 to Z=180.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00543", "images": ["images/Shaft_00543.png", "detail_png/Shaft_00543_length.png", "detail_png/Shaft_00543_diam.png", "detail_png/Shaft_00543_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.9 mm and length at least 74.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 5.1 mm (from Z=0.0 to Z=5.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.6 mm over length 13.3 mm (from Z=0.0 to Z=64.6).\n9. Finish turn diameter Ø57.2 mm over length 14.8 mm (from Z=0.0 to Z=51.3).\n10. Finish turn diameter Ø45.8 mm over length 10.2 mm (from Z=0.0 to Z=36.5).\n11. Finish turn diameter Ø30.0 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03072", "images": ["images/Shaft_03072.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.7 mm and length at least 277.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.3 mm over length 24.9 mm (from Z=0.0 to Z=236.2).\n10. Finish turn diameter Ø31.6 mm over length 211.3 mm (from Z=0.0 to Z=211.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04294", "images": ["images/Shaft_04294.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.1 mm and length at least 176.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 8.6 mm (from Z=0.0 to Z=145.0).\n9. Finish turn diameter Ø35.7 mm over length 46.5 mm (from Z=0.0 to Z=136.4).\n10. Finish turn diameter Ø30.0 mm over length 89.9 mm (from Z=0.0 to Z=89.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04422", "images": ["images/Shaft_04422.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.3 mm and length at least 188.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.9 mm over length 37.9 mm (from Z=0.0 to Z=144.6).\n9. Finish turn diameter Ø38.0 mm over length 14.2 mm (from Z=0.0 to Z=106.7).\n10. Finish turn diameter Ø31.2 mm over length 49.1 mm (from Z=0.0 to Z=92.5).\n11. Finish turn diameter Ø30.0 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01852", "images": ["images/Shaft_01852.png", "detail_png/Shaft_01852_length.png", "detail_png/Shaft_01852_diam.png", "detail_png/Shaft_01852_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.3 mm and length at least 117.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.3 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.8 mm over length 11.6 mm (from Z=0.0 to Z=65.2).\n9. Finish turn diameter Ø34.9 mm over length 41.0 mm (from Z=0.0 to Z=53.6).\n10. Finish turn diameter Ø30.0 mm over length 12.6 mm (from Z=0.0 to Z=12.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01268", "images": ["images/Shaft_01268.png", "detail_png/Shaft_01268_length.png", "detail_png/Shaft_01268_diam.png", "detail_png/Shaft_01268_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.6 mm and length at least 308.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.7 mm over length 99.6 mm (from Z=0.0 to Z=271.2).\n10. Finish turn diameter Ø59.4 mm over length 36.2 mm (from Z=0.0 to Z=171.6).\n11. Finish turn diameter Ø54.6 mm over length 135.4 mm (from Z=0.0 to Z=135.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02592", "images": ["images/Shaft_02592.png", "detail_png/Shaft_02592_length.png", "detail_png/Shaft_02592_diam.png", "detail_png/Shaft_02592_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.1 mm and length at least 86.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.6 mm over length 6.0 mm (from Z=0.0 to Z=55.9).\n9. Finish turn diameter Ø48.4 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01710", "images": ["images/Shaft_01710.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.1 mm and length at least 75.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 18.2 mm (from Z=0.0 to Z=18.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.2 mm over length 5.5 mm (from Z=0.0 to Z=51.8).\n9. Finish turn diameter Ø32.9 mm over length 10.1 mm (from Z=0.0 to Z=46.3).\n10. Finish turn diameter Ø30.0 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00183", "images": ["images/Shaft_00183.png", "detail_png/Shaft_00183_length.png", "detail_png/Shaft_00183_diam.png", "detail_png/Shaft_00183_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.6 mm and length at least 233.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 119.0 mm (from Z=0.0 to Z=119.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.6 mm over length 40.3 mm (from Z=0.0 to Z=109.5).\n10. Finish turn diameter Ø53.6 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00276", "images": ["images/Shaft_00276.png", "detail_png/Shaft_00276_length.png", "detail_png/Shaft_00276_diam.png", "detail_png/Shaft_00276_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 166.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 113.7 mm (from Z=0.0 to Z=113.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.6 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03332", "images": ["images/Shaft_03332.png", "detail_png/Shaft_03332_length.png", "detail_png/Shaft_03332_diam.png", "detail_png/Shaft_03332_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.1 mm and length at least 249.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.8 mm (from Z=0.0 to Z=164.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03215", "images": ["images/Shaft_03215.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.9 mm and length at least 224.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.9 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.8 mm over length 56.9 mm (from Z=0.0 to Z=189.6).\n10. Finish turn diameter Ø36.9 mm over length 60.7 mm (from Z=0.0 to Z=132.7).\n11. Finish turn diameter Ø31.1 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00501", "images": ["images/Shaft_00501.png", "detail_png/Shaft_00501_length.png", "detail_png/Shaft_00501_diam.png", "detail_png/Shaft_00501_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.8 mm and length at least 135.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.8 mm over length 45.2 mm (from Z=0.0 to Z=118.6).\n9. Finish turn diameter Ø30.0 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00008", "images": ["images/Shaft_00008.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.0 mm and length at least 322.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.4 mm over length 69.5 mm (from Z=0.0 to Z=247.8).\n10. Finish turn diameter Ø30.0 mm over length 178.3 mm (from Z=0.0 to Z=178.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02002", "images": ["images/Shaft_02002.png", "detail_png/Shaft_02002_length.png", "detail_png/Shaft_02002_diam.png", "detail_png/Shaft_02002_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 231.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 144.6 mm (from Z=0.0 to Z=144.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.5 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00749", "images": ["images/Shaft_00749.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.7 mm and length at least 72.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04207", "images": ["images/Shaft_04207.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 299.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 253.4 mm (from Z=0.0 to Z=253.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.5 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03519", "images": ["images/Shaft_03519.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.0 mm and length at least 131.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 96.9 mm (from Z=0.0 to Z=96.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01249", "images": ["images/Shaft_01249.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.7 mm and length at least 100.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.7 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.2 mm over length 48.8 mm (from Z=0.0 to Z=75.8).\n9. Finish turn diameter Ø30.0 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04530", "images": ["images/Shaft_04530.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 289.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.3 mm (from Z=0.0 to Z=221.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.3 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02548", "images": ["images/Shaft_02548.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.4 mm and length at least 189.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.7 mm over length 48.2 mm (from Z=0.0 to Z=167.9).\n10. Finish turn diameter Ø30.0 mm over length 119.7 mm (from Z=0.0 to Z=119.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00582", "images": ["images/Shaft_00582.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.4 mm and length at least 247.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 45.5 mm (from Z=0.0 to Z=209.7).\n10. Finish turn diameter Ø30.0 mm over length 164.2 mm (from Z=0.0 to Z=164.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00585", "images": ["images/Shaft_00585.png", "detail_png/Shaft_00585_length.png", "detail_png/Shaft_00585_diam.png", "detail_png/Shaft_00585_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.9 mm and length at least 254.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 81.1 mm (from Z=0.0 to Z=81.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.2 mm over length 58.3 mm (from Z=0.0 to Z=168.6).\n10. Finish turn diameter Ø30.0 mm over length 110.3 mm (from Z=0.0 to Z=110.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02354", "images": ["images/Shaft_02354.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.3 mm and length at least 105.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 80.4 mm (from Z=0.0 to Z=80.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04567", "images": ["images/Shaft_04567.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.1 mm and length at least 239.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 92.8 mm (from Z=0.0 to Z=92.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.2 mm over length 125.9 mm (from Z=0.0 to Z=141.2).\n10. Finish turn diameter Ø30.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01204", "images": ["images/Shaft_01204.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.2 mm and length at least 115.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.6 mm over length 34.9 mm (from Z=0.0 to Z=49.5).\n9. Finish turn diameter Ø30.0 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04799", "images": ["images/Shaft_04799.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.5 mm and length at least 303.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 280.8 mm (from Z=0.0 to Z=280.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01533", "images": ["images/Shaft_01533.png", "detail_png/Shaft_01533_length.png", "detail_png/Shaft_01533_diam.png", "detail_png/Shaft_01533_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.3 mm and length at least 124.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 90.6 mm (from Z=0.0 to Z=90.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03306", "images": ["images/Shaft_03306.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.5 mm and length at least 100.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01521", "images": ["images/Shaft_01521.png", "detail_png/Shaft_01521_length.png", "detail_png/Shaft_01521_diam.png", "detail_png/Shaft_01521_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.6 mm and length at least 169.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.9 mm (from Z=0.0 to Z=125.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00482", "images": ["images/Shaft_00482.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.3 mm and length at least 231.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 62.8 mm (from Z=0.0 to Z=198.2).\n10. Finish turn diameter Ø35.4 mm over length 105.9 mm (from Z=0.0 to Z=135.4).\n11. Finish turn diameter Ø30.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00627", "images": ["images/Shaft_00627.png", "detail_png/Shaft_00627_length.png", "detail_png/Shaft_00627_diam.png", "detail_png/Shaft_00627_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.1 mm and length at least 113.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.0 mm over length 19.8 mm (from Z=0.0 to Z=53.4).\n9. Finish turn diameter Ø40.7 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02141", "images": ["images/Shaft_02141.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.4 mm and length at least 206.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.4 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 50.3 mm (from Z=0.0 to Z=166.4).\n10. Finish turn diameter Ø30.8 mm over length 31.8 mm (from Z=0.0 to Z=116.1).\n11. Finish turn diameter Ø30.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03943", "images": ["images/Shaft_03943.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 163.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.6 mm (from Z=0.0 to Z=136.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01186", "images": ["images/Shaft_01186.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.4 mm and length at least 145.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 77.1 mm (from Z=0.0 to Z=77.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 40.0 mm (from Z=0.0 to Z=63.7).\n9. Finish turn diameter Ø41.3 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04492", "images": ["images/Shaft_04492.png", "detail_png/Shaft_04492_length.png", "detail_png/Shaft_04492_diam.png", "detail_png/Shaft_04492_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.2 mm and length at least 323.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 277.0 mm (from Z=0.0 to Z=277.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00495", "images": ["images/Shaft_00495.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.9 mm and length at least 303.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.9 mm over length 67.4 mm (from Z=0.0 to Z=67.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.4 mm over length 22.0 mm (from Z=0.0 to Z=230.9).\n10. Finish turn diameter Ø35.3 mm over length 52.6 mm (from Z=0.0 to Z=208.9).\n11. Finish turn diameter Ø30.0 mm over length 156.3 mm (from Z=0.0 to Z=156.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03535", "images": ["images/Shaft_03535.png", "detail_png/Shaft_03535_length.png", "detail_png/Shaft_03535_diam.png", "detail_png/Shaft_03535_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.2 mm and length at least 83.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.0 mm over length 8.7 mm (from Z=0.0 to Z=73.6).\n9. Finish turn diameter Ø30.0 mm over length 64.9 mm (from Z=0.0 to Z=64.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02911", "images": ["images/Shaft_02911.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.8 mm and length at least 212.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.2 mm over length 56.5 mm (from Z=0.0 to Z=163.5).\n10. Finish turn diameter Ø30.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00486", "images": ["images/Shaft_00486.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.6 mm and length at least 190.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.3 mm over length 109.5 mm (from Z=0.0 to Z=154.9).\n9. Finish turn diameter Ø30.0 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04388", "images": ["images/Shaft_04388.png", "detail_png/Shaft_04388_length.png", "detail_png/Shaft_04388_diam.png", "detail_png/Shaft_04388_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.5 mm and length at least 240.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 51.7 mm (from Z=0.0 to Z=51.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.9 mm over length 9.6 mm (from Z=0.0 to Z=183.5).\n10. Finish turn diameter Ø30.0 mm over length 173.9 mm (from Z=0.0 to Z=173.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00642", "images": ["images/Shaft_00642.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.5 mm and length at least 70.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 12.5 mm (from Z=0.0 to Z=12.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00133", "images": ["images/Shaft_00133.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 138.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 116.2 mm (from Z=0.0 to Z=116.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02534", "images": ["images/Shaft_02534.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.0 mm and length at least 286.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.2 mm over length 61.1 mm (from Z=0.0 to Z=239.1).\n10. Finish turn diameter Ø35.7 mm over length 86.1 mm (from Z=0.0 to Z=178.0).\n11. Finish turn diameter Ø30.0 mm over length 91.9 mm (from Z=0.0 to Z=91.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04252", "images": ["images/Shaft_04252.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.6 mm and length at least 137.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 6.6 mm (from Z=0.0 to Z=121.4).\n9. Finish turn diameter Ø44.5 mm over length 12.1 mm (from Z=0.0 to Z=114.8).\n10. Finish turn diameter Ø40.7 mm over length 23.2 mm (from Z=0.0 to Z=102.7).\n11. Finish turn diameter Ø30.0 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04457", "images": ["images/Shaft_04457.png", "detail_png/Shaft_04457_length.png", "detail_png/Shaft_04457_diam.png", "detail_png/Shaft_04457_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.1 mm and length at least 127.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.2 mm over length 27.3 mm (from Z=0.0 to Z=94.2).\n9. Finish turn diameter Ø33.0 mm over length 18.3 mm (from Z=0.0 to Z=66.9).\n10. Finish turn diameter Ø30.0 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03729", "images": ["images/Shaft_03729.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.5 mm and length at least 156.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 6.5 mm (from Z=0.0 to Z=6.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 145.1 mm (from Z=0.0 to Z=145.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02167", "images": ["images/Shaft_02167.png", "detail_png/Shaft_02167_length.png", "detail_png/Shaft_02167_diam.png", "detail_png/Shaft_02167_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.8 mm and length at least 152.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.8 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.9 mm over length 42.5 mm (from Z=0.0 to Z=118.9).\n9. Finish turn diameter Ø33.6 mm over length 34.7 mm (from Z=0.0 to Z=76.4).\n10. Finish turn diameter Ø30.0 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03060", "images": ["images/Shaft_03060.png", "detail_png/Shaft_03060_length.png", "detail_png/Shaft_03060_diam.png", "detail_png/Shaft_03060_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.8 mm and length at least 161.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.4 mm over length 46.6 mm (from Z=0.0 to Z=142.4).\n10. Finish turn diameter Ø30.0 mm over length 95.8 mm (from Z=0.0 to Z=95.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03598", "images": ["images/Shaft_03598.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.8 mm and length at least 294.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 121.7 mm (from Z=0.0 to Z=121.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 102.4 mm (from Z=0.0 to Z=167.7).\n10. Finish turn diameter Ø33.6 mm over length 65.3 mm (from Z=0.0 to Z=65.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04015", "images": ["images/Shaft_04015.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.3 mm and length at least 157.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.2 mm over length 21.3 mm (from Z=0.0 to Z=127.5).\n9. Finish turn diameter Ø32.0 mm over length 30.7 mm (from Z=0.0 to Z=106.2).\n10. Finish turn diameter Ø30.0 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01985", "images": ["images/Shaft_01985.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.1 mm and length at least 143.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 123.9 mm (from Z=0.0 to Z=123.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00520", "images": ["images/Shaft_00520.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.4 mm and length at least 284.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 257.6 mm (from Z=0.0 to Z=257.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02071", "images": ["images/Shaft_02071.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.9 mm and length at least 112.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.7 mm over length 15.9 mm (from Z=0.0 to Z=93.4).\n9. Finish turn diameter Ø30.0 mm over length 77.5 mm (from Z=0.0 to Z=77.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00591", "images": ["images/Shaft_00591.png", "detail_png/Shaft_00591_length.png", "detail_png/Shaft_00591_diam.png", "detail_png/Shaft_00591_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.8 mm and length at least 275.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 71.0 mm (from Z=0.0 to Z=227.0).\n10. Finish turn diameter Ø44.5 mm over length 156.0 mm (from Z=0.0 to Z=156.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03994", "images": ["images/Shaft_03994.png", "detail_png/Shaft_03994_length.png", "detail_png/Shaft_03994_diam.png", "detail_png/Shaft_03994_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.3 mm and length at least 173.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.3 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 16.7 mm (from Z=0.0 to Z=144.0).\n9. Finish turn diameter Ø45.1 mm over length 68.5 mm (from Z=0.0 to Z=127.3).\n10. Finish turn diameter Ø31.5 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02511", "images": ["images/Shaft_02511.png", "detail_png/Shaft_02511_length.png", "detail_png/Shaft_02511_diam.png", "detail_png/Shaft_02511_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 101.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.5 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03411", "images": ["images/Shaft_03411.png", "detail_png/Shaft_03411_length.png", "detail_png/Shaft_03411_diam.png", "detail_png/Shaft_03411_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.2 mm and length at least 212.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.7 mm (from Z=0.0 to Z=190.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03948", "images": ["images/Shaft_03948.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.6 mm and length at least 194.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.6 mm over length 27.6 mm (from Z=0.0 to Z=115.5).\n9. Finish turn diameter Ø44.7 mm over length 56.7 mm (from Z=0.0 to Z=87.9).\n10. Finish turn diameter Ø31.4 mm over length 12.0 mm (from Z=0.0 to Z=31.2).\n11. Finish turn diameter Ø30.0 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04623", "images": ["images/Shaft_04623.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.8 mm and length at least 265.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.9 mm over length 58.4 mm (from Z=0.0 to Z=207.4).\n10. Finish turn diameter Ø43.4 mm over length 18.8 mm (from Z=0.0 to Z=149.0).\n11. Finish turn diameter Ø34.1 mm over length 22.4 mm (from Z=0.0 to Z=130.2).\n12. Finish turn diameter Ø30.0 mm over length 107.8 mm (from Z=0.0 to Z=107.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02043", "images": ["images/Shaft_02043.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 243.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 137.6 mm (from Z=0.0 to Z=137.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 101.0 mm (from Z=0.0 to Z=101.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02833", "images": ["images/Shaft_02833.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.0 mm and length at least 320.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.2 mm over length 47.8 mm (from Z=0.0 to Z=265.3).\n10. Finish turn diameter Ø58.2 mm over length 89.5 mm (from Z=0.0 to Z=217.5).\n11. Finish turn diameter Ø46.8 mm over length 92.1 mm (from Z=0.0 to Z=128.0).\n12. Finish turn diameter Ø34.6 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02604", "images": ["images/Shaft_02604.png", "detail_png/Shaft_02604_length.png", "detail_png/Shaft_02604_diam.png", "detail_png/Shaft_02604_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.4 mm and length at least 139.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 41.8 mm (from Z=0.0 to Z=111.4).\n9. Finish turn diameter Ø30.0 mm over length 69.6 mm (from Z=0.0 to Z=69.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02125", "images": ["images/Shaft_02125.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.6 mm and length at least 115.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.5 mm over length 29.6 mm (from Z=0.0 to Z=91.7).\n9. Finish turn diameter Ø43.4 mm over length 8.7 mm (from Z=0.0 to Z=62.1).\n10. Finish turn diameter Ø30.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04632", "images": ["images/Shaft_04632.png", "detail_png/Shaft_04632_length.png", "detail_png/Shaft_04632_diam.png", "detail_png/Shaft_04632_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.6 mm and length at least 186.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 65.2 mm (from Z=0.0 to Z=124.6).\n9. Finish turn diameter Ø38.6 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01649", "images": ["images/Shaft_01649.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.4 mm and length at least 314.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 79.1 mm (from Z=0.0 to Z=79.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 107.3 mm (from Z=0.0 to Z=230.3).\n10. Finish turn diameter Ø30.0 mm over length 123.0 mm (from Z=0.0 to Z=123.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02155", "images": ["images/Shaft_02155.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.3 mm and length at least 257.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 165.5 mm (from Z=0.0 to Z=165.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 46.5 mm (from Z=0.0 to Z=87.4).\n10. Finish turn diameter Ø46.5 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01512", "images": ["images/Shaft_01512.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.4 mm and length at least 262.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.1 mm over length 62.6 mm (from Z=0.0 to Z=182.1).\n10. Finish turn diameter Ø30.0 mm over length 119.5 mm (from Z=0.0 to Z=119.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00319", "images": ["images/Shaft_00319.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.2 mm and length at least 111.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.6 mm (from Z=0.0 to Z=81.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03779", "images": ["images/Shaft_03779.png", "detail_png/Shaft_03779_length.png", "detail_png/Shaft_03779_diam.png", "detail_png/Shaft_03779_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.8 mm and length at least 142.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.3 mm over length 28.7 mm (from Z=0.0 to Z=112.3).\n9. Finish turn diameter Ø56.8 mm over length 24.6 mm (from Z=0.0 to Z=83.6).\n10. Finish turn diameter Ø43.8 mm over length 21.3 mm (from Z=0.0 to Z=59.0).\n11. Finish turn diameter Ø32.3 mm over length 32.7 mm (from Z=0.0 to Z=37.7).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00879", "images": ["images/Shaft_00879.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.6 mm and length at least 175.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.3 mm over length 42.0 mm (from Z=0.0 to Z=123.3).\n9. Finish turn diameter Ø45.3 mm over length 51.4 mm (from Z=0.0 to Z=81.3).\n10. Finish turn diameter Ø30.0 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01950", "images": ["images/Shaft_01950.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.9 mm and length at least 148.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.3 mm over length 44.0 mm (from Z=0.0 to Z=83.8).\n9. Finish turn diameter Ø30.0 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03583", "images": ["images/Shaft_03583.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.5 mm and length at least 73.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.6 mm over length 17.0 mm (from Z=0.0 to Z=54.1).\n9. Finish turn diameter Ø30.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04348", "images": ["images/Shaft_04348.png", "detail_png/Shaft_04348_length.png", "detail_png/Shaft_04348_diam.png", "detail_png/Shaft_04348_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.5 mm and length at least 255.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.2 mm over length 46.5 mm (from Z=0.0 to Z=226.8).\n10. Finish turn diameter Ø31.9 mm over length 46.0 mm (from Z=0.0 to Z=180.3).\n11. Finish turn diameter Ø30.0 mm over length 134.3 mm (from Z=0.0 to Z=134.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00254", "images": ["images/Shaft_00254.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.5 mm and length at least 186.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 8.8 mm (from Z=0.0 to Z=8.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.4 mm over length 82.2 mm (from Z=0.0 to Z=173.0).\n9. Finish turn diameter Ø51.2 mm over length 82.9 mm (from Z=0.0 to Z=90.8).\n10. Finish turn diameter Ø41.1 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04869", "images": ["images/Shaft_04869.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.4 mm and length at least 321.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.4 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 52.7 mm (from Z=0.0 to Z=288.3).\n10. Finish turn diameter Ø33.4 mm over length 50.9 mm (from Z=0.0 to Z=235.6).\n11. Finish turn diameter Ø30.0 mm over length 184.7 mm (from Z=0.0 to Z=184.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00335", "images": ["images/Shaft_00335.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.0 mm and length at least 321.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.9 mm over length 33.6 mm (from Z=0.0 to Z=211.3).\n10. Finish turn diameter Ø53.1 mm over length 40.8 mm (from Z=0.0 to Z=177.7).\n11. Finish turn diameter Ø40.6 mm over length 114.9 mm (from Z=0.0 to Z=136.9).\n12. Finish turn diameter Ø32.4 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03319", "images": ["images/Shaft_03319.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.3 mm and length at least 72.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.6 mm over length 19.3 mm (from Z=0.0 to Z=35.8).\n9. Finish turn diameter Ø30.0 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01743", "images": ["images/Shaft_01743.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.5 mm and length at least 228.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.9 mm over length 50.0 mm (from Z=0.0 to Z=164.1).\n10. Finish turn diameter Ø31.7 mm over length 27.9 mm (from Z=0.0 to Z=114.1).\n11. Finish turn diameter Ø30.0 mm over length 86.2 mm (from Z=0.0 to Z=86.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00600", "images": ["images/Shaft_00600.png", "detail_png/Shaft_00600_length.png", "detail_png/Shaft_00600_diam.png", "detail_png/Shaft_00600_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.9 mm and length at least 67.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 5.1 mm (from Z=0.0 to Z=5.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.6 mm over length 5.0 mm (from Z=0.0 to Z=57.1).\n9. Finish turn diameter Ø58.9 mm over length 14.4 mm (from Z=0.0 to Z=52.1).\n10. Finish turn diameter Ø45.3 mm over length 24.6 mm (from Z=0.0 to Z=37.7).\n11. Finish turn diameter Ø31.0 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00401", "images": ["images/Shaft_00401.png", "detail_png/Shaft_00401_length.png", "detail_png/Shaft_00401_diam.png", "detail_png/Shaft_00401_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.8 mm and length at least 321.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 63.2 mm (from Z=0.0 to Z=63.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.9 mm over length 61.8 mm (from Z=0.0 to Z=252.9).\n10. Finish turn diameter Ø60.2 mm over length 47.1 mm (from Z=0.0 to Z=191.1).\n11. Finish turn diameter Ø52.3 mm over length 70.5 mm (from Z=0.0 to Z=144.0).\n12. Finish turn diameter Ø44.3 mm over length 47.6 mm (from Z=0.0 to Z=73.5).\n13. Finish turn diameter Ø35.7 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01860", "images": ["images/Shaft_01860.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.9 mm and length at least 172.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 85.5 mm (from Z=0.0 to Z=85.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.6 mm over length 17.1 mm (from Z=0.0 to Z=82.1).\n9. Finish turn diameter Ø38.2 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03530", "images": ["images/Shaft_03530.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.5 mm and length at least 182.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 26.5 mm (from Z=0.0 to Z=141.7).\n10. Finish turn diameter Ø30.0 mm over length 115.2 mm (from Z=0.0 to Z=115.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00788", "images": ["images/Shaft_00788.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.5 mm and length at least 89.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.9 mm over length 12.7 mm (from Z=0.0 to Z=66.1).\n9. Finish turn diameter Ø32.8 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02987", "images": ["images/Shaft_02987.png", "detail_png/Shaft_02987_length.png", "detail_png/Shaft_02987_diam.png", "detail_png/Shaft_02987_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.1 mm and length at least 240.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.9 mm over length 50.1 mm (from Z=0.0 to Z=181.0).\n10. Finish turn diameter Ø30.0 mm over length 130.9 mm (from Z=0.0 to Z=130.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01342", "images": ["images/Shaft_01342.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.9 mm and length at least 284.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.7 mm over length 99.6 mm (from Z=0.0 to Z=246.3).\n10. Finish turn diameter Ø48.3 mm over length 91.7 mm (from Z=0.0 to Z=146.7).\n11. Finish turn diameter Ø30.5 mm over length 13.3 mm (from Z=0.0 to Z=55.0).\n12. Finish turn diameter Ø30.0 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02454", "images": ["images/Shaft_02454.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.3 mm and length at least 176.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.9 mm over length 56.4 mm (from Z=0.0 to Z=150.7).\n9. Finish turn diameter Ø54.3 mm over length 68.9 mm (from Z=0.0 to Z=94.3).\n10. Finish turn diameter Ø44.8 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03314", "images": ["images/Shaft_03314.png", "detail_png/Shaft_03314_length.png", "detail_png/Shaft_03314_diam.png", "detail_png/Shaft_03314_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.5 mm and length at least 204.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.1 mm over length 70.1 mm (from Z=0.0 to Z=181.5).\n10. Finish turn diameter Ø34.7 mm over length 45.6 mm (from Z=0.0 to Z=111.4).\n11. Finish turn diameter Ø30.0 mm over length 65.8 mm (from Z=0.0 to Z=65.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03534", "images": ["images/Shaft_03534.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.2 mm and length at least 263.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 72.8 mm (from Z=0.0 to Z=229.3).\n10. Finish turn diameter Ø36.6 mm over length 68.4 mm (from Z=0.0 to Z=156.5).\n11. Finish turn diameter Ø30.0 mm over length 88.1 mm (from Z=0.0 to Z=88.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01546", "images": ["images/Shaft_01546.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.5 mm and length at least 296.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.3 mm over length 23.8 mm (from Z=0.0 to Z=255.7).\n10. Finish turn diameter Ø55.6 mm over length 8.5 mm (from Z=0.0 to Z=231.9).\n11. Finish turn diameter Ø39.3 mm over length 91.9 mm (from Z=0.0 to Z=223.4).\n12. Finish turn diameter Ø30.0 mm over length 131.5 mm (from Z=0.0 to Z=131.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00573", "images": ["images/Shaft_00573.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.1 mm and length at least 226.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 77.2 mm (from Z=0.0 to Z=206.5).\n10. Finish turn diameter Ø30.0 mm over length 129.3 mm (from Z=0.0 to Z=129.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03340", "images": ["images/Shaft_03340.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.4 mm and length at least 284.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 69.7 mm (from Z=0.0 to Z=69.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.5 mm over length 34.3 mm (from Z=0.0 to Z=209.4).\n10. Finish turn diameter Ø34.2 mm over length 99.8 mm (from Z=0.0 to Z=175.1).\n11. Finish turn diameter Ø30.0 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01225", "images": ["images/Shaft_01225.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.5 mm and length at least 158.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 47.2 mm (from Z=0.0 to Z=47.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.0 mm over length 36.0 mm (from Z=0.0 to Z=105.8).\n9. Finish turn diameter Ø38.1 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01434", "images": ["images/Shaft_01434.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.0 mm and length at least 224.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.0 mm over length 106.7 mm (from Z=0.0 to Z=106.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.1 mm over length 91.6 mm (from Z=0.0 to Z=113.1).\n10. Finish turn diameter Ø30.0 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04919", "images": ["images/Shaft_04919.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.3 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 5.0 mm (from Z=0.0 to Z=134.9).\n9. Finish turn diameter Ø40.2 mm over length 39.8 mm (from Z=0.0 to Z=129.9).\n10. Finish turn diameter Ø33.8 mm over length 28.0 mm (from Z=0.0 to Z=90.1).\n11. Finish turn diameter Ø30.0 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02184", "images": ["images/Shaft_02184.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.5 mm and length at least 144.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 120.5 mm (from Z=0.0 to Z=120.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04759", "images": ["images/Shaft_04759.png", "detail_png/Shaft_04759_length.png", "detail_png/Shaft_04759_diam.png", "detail_png/Shaft_04759_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 301.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 176.9 mm (from Z=0.0 to Z=176.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.1 mm over length 119.5 mm (from Z=0.0 to Z=119.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03167", "images": ["images/Shaft_03167.png", "detail_png/Shaft_03167_length.png", "detail_png/Shaft_03167_diam.png", "detail_png/Shaft_03167_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.7 mm and length at least 145.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 6.4 mm (from Z=0.0 to Z=113.5).\n10. Finish turn diameter Ø30.0 mm over length 107.1 mm (from Z=0.0 to Z=107.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01388", "images": ["images/Shaft_01388.png", "detail_png/Shaft_01388_length.png", "detail_png/Shaft_01388_diam.png", "detail_png/Shaft_01388_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.1 mm and length at least 319.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.1 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 48.6 mm (from Z=0.0 to Z=255.2).\n10. Finish turn diameter Ø38.1 mm over length 35.3 mm (from Z=0.0 to Z=206.6).\n11. Finish turn diameter Ø30.0 mm over length 171.3 mm (from Z=0.0 to Z=171.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03009", "images": ["images/Shaft_03009.png", "detail_png/Shaft_03009_length.png", "detail_png/Shaft_03009_diam.png", "detail_png/Shaft_03009_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.2 mm and length at least 197.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 173.8 mm (from Z=0.0 to Z=173.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02871", "images": ["images/Shaft_02871.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.8 mm and length at least 177.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.8 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 123.9 mm (from Z=0.0 to Z=123.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04169", "images": ["images/Shaft_04169.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.4 mm and length at least 116.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.4 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.4 mm over length 18.2 mm (from Z=0.0 to Z=98.5).\n9. Finish turn diameter Ø30.0 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01838", "images": ["images/Shaft_01838.png", "detail_png/Shaft_01838_length.png", "detail_png/Shaft_01838_diam.png", "detail_png/Shaft_01838_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.6 mm and length at least 120.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.3 mm over length 22.6 mm (from Z=0.0 to Z=110.3).\n9. Finish turn diameter Ø59.0 mm over length 24.0 mm (from Z=0.0 to Z=87.7).\n10. Finish turn diameter Ø43.6 mm over length 22.3 mm (from Z=0.0 to Z=63.7).\n11. Finish turn diameter Ø30.0 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00510", "images": ["images/Shaft_00510.png", "detail_png/Shaft_00510_length.png", "detail_png/Shaft_00510_diam.png", "detail_png/Shaft_00510_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.0 mm and length at least 227.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.1 mm over length 29.0 mm (from Z=0.0 to Z=166.5).\n10. Finish turn diameter Ø56.2 mm over length 34.8 mm (from Z=0.0 to Z=137.5).\n11. Finish turn diameter Ø42.9 mm over length 40.2 mm (from Z=0.0 to Z=102.7).\n12. Finish turn diameter Ø31.0 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02663", "images": ["images/Shaft_02663.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.5 mm and length at least 309.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 87.2 mm (from Z=0.0 to Z=87.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.1 mm over length 47.6 mm (from Z=0.0 to Z=217.7).\n10. Finish turn diameter Ø48.3 mm over length 71.8 mm (from Z=0.0 to Z=170.1).\n11. Finish turn diameter Ø32.2 mm over length 77.6 mm (from Z=0.0 to Z=98.3).\n12. Finish turn diameter Ø30.0 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03604", "images": ["images/Shaft_03604.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 159.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 104.3 mm (from Z=0.0 to Z=104.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.7 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03678", "images": ["images/Shaft_03678.png", "detail_png/Shaft_03678_length.png", "detail_png/Shaft_03678_diam.png", "detail_png/Shaft_03678_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 274.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 253.1 mm (from Z=0.0 to Z=253.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04243", "images": ["images/Shaft_04243.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.5 mm and length at least 179.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.8 mm over length 24.8 mm (from Z=0.0 to Z=132.9).\n9. Finish turn diameter Ø53.6 mm over length 14.4 mm (from Z=0.0 to Z=108.1).\n10. Finish turn diameter Ø42.5 mm over length 29.9 mm (from Z=0.0 to Z=93.7).\n11. Finish turn diameter Ø38.6 mm over length 36.2 mm (from Z=0.0 to Z=63.8).\n12. Finish turn diameter Ø30.0 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03761", "images": ["images/Shaft_03761.png", "detail_png/Shaft_03761_length.png", "detail_png/Shaft_03761_diam.png", "detail_png/Shaft_03761_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.5 mm and length at least 310.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.8 mm over length 71.2 mm (from Z=0.0 to Z=282.0).\n10. Finish turn diameter Ø44.3 mm over length 62.4 mm (from Z=0.0 to Z=210.8).\n11. Finish turn diameter Ø32.5 mm over length 70.2 mm (from Z=0.0 to Z=148.4).\n12. Finish turn diameter Ø30.0 mm over length 78.2 mm (from Z=0.0 to Z=78.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04113", "images": ["images/Shaft_04113.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.6 mm and length at least 283.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 245.9 mm (from Z=0.0 to Z=245.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03193", "images": ["images/Shaft_03193.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.1 mm and length at least 270.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.0 mm over length 44.2 mm (from Z=0.0 to Z=223.4).\n10. Finish turn diameter Ø30.6 mm over length 32.3 mm (from Z=0.0 to Z=179.2).\n11. Finish turn diameter Ø30.0 mm over length 146.9 mm (from Z=0.0 to Z=146.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04420", "images": ["images/Shaft_04420.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.4 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 178.4 mm (from Z=0.0 to Z=178.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02069", "images": ["images/Shaft_02069.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.1 mm and length at least 228.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.2 mm (from Z=0.0 to Z=200.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01731", "images": ["images/Shaft_01731.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.7 mm and length at least 108.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.3 mm over length 17.9 mm (from Z=0.0 to Z=71.7).\n9. Finish turn diameter Ø54.6 mm over length 17.0 mm (from Z=0.0 to Z=53.8).\n10. Finish turn diameter Ø39.9 mm over length 20.1 mm (from Z=0.0 to Z=36.8).\n11. Finish turn diameter Ø30.2 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04085", "images": ["images/Shaft_04085.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.3 mm and length at least 96.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 7.6 mm (from Z=0.0 to Z=7.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.2 mm over length 24.7 mm (from Z=0.0 to Z=84.0).\n9. Finish turn diameter Ø32.3 mm over length 17.9 mm (from Z=0.0 to Z=59.3).\n10. Finish turn diameter Ø30.0 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00988", "images": ["images/Shaft_00988.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.4 mm and length at least 209.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 124.4 mm (from Z=0.0 to Z=124.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01059", "images": ["images/Shaft_01059.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.1 mm and length at least 308.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.1 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 9.4 mm (from Z=0.0 to Z=214.1).\n10. Finish turn diameter Ø57.1 mm over length 60.5 mm (from Z=0.0 to Z=204.7).\n11. Finish turn diameter Ø45.4 mm over length 29.8 mm (from Z=0.0 to Z=144.2).\n12. Finish turn diameter Ø33.1 mm over length 69.7 mm (from Z=0.0 to Z=114.4).\n13. Finish turn diameter Ø30.0 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03226", "images": ["images/Shaft_03226.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.8 mm and length at least 90.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.8 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.0 mm over length 5.0 mm (from Z=0.0 to Z=78.4).\n9. Finish turn diameter Ø54.0 mm over length 34.5 mm (from Z=0.0 to Z=73.4).\n10. Finish turn diameter Ø44.0 mm over length 6.3 mm (from Z=0.0 to Z=38.9).\n11. Finish turn diameter Ø33.7 mm over length 12.8 mm (from Z=0.0 to Z=32.6).\n12. Finish turn diameter Ø30.0 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00114", "images": ["images/Shaft_00114.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.6 mm and length at least 71.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 40.5 mm (from Z=0.0 to Z=40.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04672", "images": ["images/Shaft_04672.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.5 mm and length at least 90.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.7 mm over length 10.6 mm (from Z=0.0 to Z=56.9).\n9. Finish turn diameter Ø30.0 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04635", "images": ["images/Shaft_04635.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.5 mm and length at least 121.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 36.5 mm (from Z=0.0 to Z=104.7).\n9. Finish turn diameter Ø44.5 mm over length 41.0 mm (from Z=0.0 to Z=68.2).\n10. Finish turn diameter Ø34.1 mm over length 18.6 mm (from Z=0.0 to Z=27.2).\n11. Finish turn diameter Ø30.0 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01395", "images": ["images/Shaft_01395.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.4 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.2 mm over length 9.6 mm (from Z=0.0 to Z=121.5).\n9. Finish turn diameter Ø41.1 mm over length 27.4 mm (from Z=0.0 to Z=111.9).\n10. Finish turn diameter Ø32.2 mm over length 19.7 mm (from Z=0.0 to Z=84.5).\n11. Finish turn diameter Ø30.0 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02135", "images": ["images/Shaft_02135.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.9 mm and length at least 251.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.4 mm over length 41.6 mm (from Z=0.0 to Z=191.5).\n10. Finish turn diameter Ø39.0 mm over length 24.0 mm (from Z=0.0 to Z=149.9).\n11. Finish turn diameter Ø30.0 mm over length 125.9 mm (from Z=0.0 to Z=125.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04777", "images": ["images/Shaft_04777.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.1 mm and length at least 306.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 91.0 mm (from Z=0.0 to Z=91.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.2 mm over length 105.9 mm (from Z=0.0 to Z=210.5).\n10. Finish turn diameter Ø30.8 mm over length 14.0 mm (from Z=0.0 to Z=104.6).\n11. Finish turn diameter Ø30.0 mm over length 90.6 mm (from Z=0.0 to Z=90.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04100", "images": ["images/Shaft_04100.png", "detail_png/Shaft_04100_length.png", "detail_png/Shaft_04100_diam.png", "detail_png/Shaft_04100_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.3 mm and length at least 255.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 90.5 mm (from Z=0.0 to Z=90.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 160.0 mm (from Z=0.0 to Z=160.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04552", "images": ["images/Shaft_04552.png", "detail_png/Shaft_04552_length.png", "detail_png/Shaft_04552_diam.png", "detail_png/Shaft_04552_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.3 mm and length at least 228.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 188.7 mm (from Z=0.0 to Z=188.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02691", "images": ["images/Shaft_02691.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.6 mm and length at least 284.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 109.0 mm (from Z=0.0 to Z=109.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.9 mm over length 127.7 mm (from Z=0.0 to Z=170.5).\n10. Finish turn diameter Ø32.9 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00875", "images": ["images/Shaft_00875.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.6 mm and length at least 228.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 72.9 mm (from Z=0.0 to Z=152.8).\n10. Finish turn diameter Ø30.0 mm over length 79.9 mm (from Z=0.0 to Z=79.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01162", "images": ["images/Shaft_01162.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.7 mm and length at least 159.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 25.8 mm (from Z=0.0 to Z=114.9).\n9. Finish turn diameter Ø53.7 mm over length 55.8 mm (from Z=0.0 to Z=89.1).\n10. Finish turn diameter Ø36.7 mm over length 6.1 mm (from Z=0.0 to Z=33.3).\n11. Finish turn diameter Ø30.0 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02215", "images": ["images/Shaft_02215.png", "detail_png/Shaft_02215_length.png", "detail_png/Shaft_02215_diam.png", "detail_png/Shaft_02215_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.7 mm and length at least 129.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.8 mm over length 5.8 mm (from Z=0.0 to Z=107.1).\n10. Finish turn diameter Ø30.0 mm over length 101.3 mm (from Z=0.0 to Z=101.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02131", "images": ["images/Shaft_02131.png", "detail_png/Shaft_02131_length.png", "detail_png/Shaft_02131_diam.png", "detail_png/Shaft_02131_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø34.6 mm and length at least 128.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04353", "images": ["images/Shaft_04353.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.4 mm and length at least 125.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.4 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 21.5 mm (from Z=0.0 to Z=80.7).\n9. Finish turn diameter Ø36.2 mm over length 21.3 mm (from Z=0.0 to Z=59.2).\n10. Finish turn diameter Ø33.2 mm over length 25.0 mm (from Z=0.0 to Z=37.9).\n11. Finish turn diameter Ø30.0 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03626", "images": ["images/Shaft_03626.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.1 mm and length at least 86.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.1 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.7 mm over length 24.3 mm (from Z=0.0 to Z=52.7).\n9. Finish turn diameter Ø30.0 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02441", "images": ["images/Shaft_02441.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.5 mm and length at least 319.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 159.3 mm (from Z=0.0 to Z=256.4).\n10. Finish turn diameter Ø30.6 mm over length 68.6 mm (from Z=0.0 to Z=97.1).\n11. Finish turn diameter Ø30.0 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02201", "images": ["images/Shaft_02201.png", "detail_png/Shaft_02201_length.png", "detail_png/Shaft_02201_diam.png", "detail_png/Shaft_02201_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.3 mm and length at least 244.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.9 mm over length 77.3 mm (from Z=0.0 to Z=172.1).\n10. Finish turn diameter Ø32.0 mm over length 45.5 mm (from Z=0.0 to Z=94.8).\n11. Finish turn diameter Ø30.0 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02570", "images": ["images/Shaft_02570.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.3 mm and length at least 276.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 225.9 mm (from Z=0.0 to Z=225.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02969", "images": ["images/Shaft_02969.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.9 mm and length at least 285.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.8 mm over length 76.5 mm (from Z=0.0 to Z=254.4).\n10. Finish turn diameter Ø30.0 mm over length 177.9 mm (from Z=0.0 to Z=177.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03610", "images": ["images/Shaft_03610.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 127.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.4 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00808", "images": ["images/Shaft_00808.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.7 mm and length at least 298.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 39.7 mm (from Z=0.0 to Z=258.5).\n10. Finish turn diameter Ø30.0 mm over length 218.8 mm (from Z=0.0 to Z=218.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03447", "images": ["images/Shaft_03447.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 194.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 91.3 mm (from Z=0.0 to Z=91.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.4 mm over length 97.8 mm (from Z=0.0 to Z=97.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01414", "images": ["images/Shaft_01414.png", "detail_png/Shaft_01414_length.png", "detail_png/Shaft_01414_diam.png", "detail_png/Shaft_01414_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.2 mm and length at least 113.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.4 mm over length 52.5 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø44.7 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01811", "images": ["images/Shaft_01811.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.1 mm and length at least 322.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 115.8 mm (from Z=0.0 to Z=115.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 54.9 mm (from Z=0.0 to Z=202.1).\n10. Finish turn diameter Ø30.0 mm over length 147.2 mm (from Z=0.0 to Z=147.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02229", "images": ["images/Shaft_02229.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.2 mm and length at least 275.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 84.8 mm (from Z=0.0 to Z=84.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 31.5 mm (from Z=0.0 to Z=185.4).\n10. Finish turn diameter Ø51.3 mm over length 30.6 mm (from Z=0.0 to Z=153.9).\n11. Finish turn diameter Ø32.3 mm over length 80.0 mm (from Z=0.0 to Z=123.3).\n12. Finish turn diameter Ø30.0 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03998", "images": ["images/Shaft_03998.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.2 mm and length at least 228.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 70.7 mm (from Z=0.0 to Z=70.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.7 mm over length 30.8 mm (from Z=0.0 to Z=152.6).\n10. Finish turn diameter Ø45.8 mm over length 121.8 mm (from Z=0.0 to Z=121.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01827", "images": ["images/Shaft_01827.png", "detail_png/Shaft_01827_length.png", "detail_png/Shaft_01827_diam.png", "detail_png/Shaft_01827_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.1 mm and length at least 323.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.1 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.4 mm over length 45.1 mm (from Z=0.0 to Z=229.0).\n10. Finish turn diameter Ø54.4 mm over length 60.2 mm (from Z=0.0 to Z=183.9).\n11. Finish turn diameter Ø42.3 mm over length 15.2 mm (from Z=0.0 to Z=123.7).\n12. Finish turn diameter Ø30.0 mm over length 108.5 mm (from Z=0.0 to Z=108.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01654", "images": ["images/Shaft_01654.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 288.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 256.5 mm (from Z=0.0 to Z=256.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.1 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00601", "images": ["images/Shaft_00601.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.8 mm and length at least 242.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 110.3 mm (from Z=0.0 to Z=191.9).\n10. Finish turn diameter Ø30.0 mm over length 81.6 mm (from Z=0.0 to Z=81.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02161", "images": ["images/Shaft_02161.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.1 mm and length at least 137.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.1 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.1 mm over length 32.2 mm (from Z=0.0 to Z=122.0).\n9. Finish turn diameter Ø55.6 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01145", "images": ["images/Shaft_01145.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.7 mm and length at least 209.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.0 mm over length 43.7 mm (from Z=0.0 to Z=190.3).\n10. Finish turn diameter Ø30.0 mm over length 146.6 mm (from Z=0.0 to Z=146.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02562", "images": ["images/Shaft_02562.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.7 mm and length at least 209.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.7 mm over length 17.7 mm (from Z=0.0 to Z=183.4).\n10. Finish turn diameter Ø30.7 mm over length 60.8 mm (from Z=0.0 to Z=165.7).\n11. Finish turn diameter Ø30.0 mm over length 104.9 mm (from Z=0.0 to Z=104.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01409", "images": ["images/Shaft_01409.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 265.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 120.9 mm (from Z=0.0 to Z=195.0).\n10. Finish turn diameter Ø36.8 mm over length 63.5 mm (from Z=0.0 to Z=74.1).\n11. Finish turn diameter Ø30.0 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04214", "images": ["images/Shaft_04214.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.4 mm and length at least 258.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 73.9 mm (from Z=0.0 to Z=219.0).\n10. Finish turn diameter Ø53.2 mm over length 79.6 mm (from Z=0.0 to Z=145.1).\n11. Finish turn diameter Ø46.6 mm over length 18.7 mm (from Z=0.0 to Z=65.5).\n12. Finish turn diameter Ø42.0 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01246", "images": ["images/Shaft_01246.png", "detail_png/Shaft_01246_length.png", "detail_png/Shaft_01246_diam.png", "detail_png/Shaft_01246_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.6 mm and length at least 304.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.6 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.2 mm over length 20.5 mm (from Z=0.0 to Z=236.0).\n10. Finish turn diameter Ø44.7 mm over length 51.0 mm (from Z=0.0 to Z=215.5).\n11. Finish turn diameter Ø35.3 mm over length 70.2 mm (from Z=0.0 to Z=164.5).\n12. Finish turn diameter Ø30.0 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02267", "images": ["images/Shaft_02267.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.7 mm and length at least 191.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.7 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.7 mm over length 58.9 mm (from Z=0.0 to Z=165.8).\n9. Finish turn diameter Ø47.8 mm over length 14.7 mm (from Z=0.0 to Z=106.9).\n10. Finish turn diameter Ø44.3 mm over length 28.1 mm (from Z=0.0 to Z=92.2).\n11. Finish turn diameter Ø38.9 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03251", "images": ["images/Shaft_03251.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.3 mm and length at least 283.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 17.3 mm (from Z=0.0 to Z=240.4).\n10. Finish turn diameter Ø30.0 mm over length 223.1 mm (from Z=0.0 to Z=223.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01717", "images": ["images/Shaft_01717.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 232.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 157.7 mm (from Z=0.0 to Z=157.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01211", "images": ["images/Shaft_01211.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.8 mm and length at least 175.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.8 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 119.3 mm (from Z=0.0 to Z=137.6).\n9. Finish turn diameter Ø30.0 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03827", "images": ["images/Shaft_03827.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.7 mm and length at least 158.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 52.7 mm (from Z=0.0 to Z=52.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.7 mm over length 26.2 mm (from Z=0.0 to Z=100.4).\n9. Finish turn diameter Ø50.4 mm over length 63.8 mm (from Z=0.0 to Z=74.2).\n10. Finish turn diameter Ø32.8 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00236", "images": ["images/Shaft_00236.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.4 mm and length at least 228.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.4 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.6 mm over length 37.9 mm (from Z=0.0 to Z=187.1).\n10. Finish turn diameter Ø36.8 mm over length 58.8 mm (from Z=0.0 to Z=149.2).\n11. Finish turn diameter Ø30.0 mm over length 90.4 mm (from Z=0.0 to Z=90.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04004", "images": ["images/Shaft_04004.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.7 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.1 mm (from Z=0.0 to Z=100.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00618", "images": ["images/Shaft_00618.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.7 mm and length at least 317.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.7 mm over length 42.9 mm (from Z=0.0 to Z=42.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.7 mm over length 30.0 mm (from Z=0.0 to Z=269.9).\n10. Finish turn diameter Ø60.7 mm over length 68.9 mm (from Z=0.0 to Z=239.9).\n11. Finish turn diameter Ø55.4 mm over length 101.8 mm (from Z=0.0 to Z=171.0).\n12. Finish turn diameter Ø38.0 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02553", "images": ["images/Shaft_02553.png", "detail_png/Shaft_02553_length.png", "detail_png/Shaft_02553_diam.png", "detail_png/Shaft_02553_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 134.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 89.2 mm (from Z=0.0 to Z=89.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.4 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01610", "images": ["images/Shaft_01610.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.5 mm and length at least 76.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.0 mm over length 10.7 mm (from Z=0.0 to Z=50.4).\n9. Finish turn diameter Ø30.0 mm over length 39.7 mm (from Z=0.0 to Z=39.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03338", "images": ["images/Shaft_03338.png", "detail_png/Shaft_03338_length.png", "detail_png/Shaft_03338_diam.png", "detail_png/Shaft_03338_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.9 mm and length at least 304.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 78.6 mm (from Z=0.0 to Z=78.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 220.6 mm (from Z=0.0 to Z=220.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01777", "images": ["images/Shaft_01777.png", "detail_png/Shaft_01777_length.png", "detail_png/Shaft_01777_diam.png", "detail_png/Shaft_01777_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 284.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.1 mm (from Z=0.0 to Z=202.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00673", "images": ["images/Shaft_00673.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.9 mm and length at least 188.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.4 mm over length 41.5 mm (from Z=0.0 to Z=125.5).\n9. Finish turn diameter Ø42.6 mm over length 8.4 mm (from Z=0.0 to Z=84.0).\n10. Finish turn diameter Ø35.8 mm over length 28.3 mm (from Z=0.0 to Z=75.6).\n11. Finish turn diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03936", "images": ["images/Shaft_03936.png", "detail_png/Shaft_03936_length.png", "detail_png/Shaft_03936_diam.png", "detail_png/Shaft_03936_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 209.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 58.5 mm (from Z=0.0 to Z=170.7).\n10. Finish turn diameter Ø30.0 mm over length 112.2 mm (from Z=0.0 to Z=112.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01289", "images": ["images/Shaft_01289.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.9 mm and length at least 93.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 5.5 mm (from Z=0.0 to Z=5.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.1 mm over length 15.4 mm (from Z=0.0 to Z=82.8).\n9. Finish turn diameter Ø42.9 mm over length 14.4 mm (from Z=0.0 to Z=67.4).\n10. Finish turn diameter Ø31.8 mm over length 25.3 mm (from Z=0.0 to Z=53.0).\n11. Finish turn diameter Ø30.0 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04602", "images": ["images/Shaft_04602.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.5 mm and length at least 218.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.0 mm over length 15.7 mm (from Z=0.0 to Z=162.9).\n10. Finish turn diameter Ø30.5 mm over length 15.1 mm (from Z=0.0 to Z=147.2).\n11. Finish turn diameter Ø30.0 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03309", "images": ["images/Shaft_03309.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.6 mm and length at least 224.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.6 mm (from Z=0.0 to Z=126.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03504", "images": ["images/Shaft_03504.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.4 mm and length at least 279.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 52.8 mm (from Z=0.0 to Z=52.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.7 mm over length 75.2 mm (from Z=0.0 to Z=221.9).\n10. Finish turn diameter Ø30.0 mm over length 146.7 mm (from Z=0.0 to Z=146.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02119", "images": ["images/Shaft_02119.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.4 mm and length at least 291.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.0 mm over length 65.3 mm (from Z=0.0 to Z=270.6).\n10. Finish turn diameter Ø42.5 mm over length 42.5 mm (from Z=0.0 to Z=205.3).\n11. Finish turn diameter Ø35.8 mm over length 50.0 mm (from Z=0.0 to Z=162.8).\n12. Finish turn diameter Ø30.3 mm over length 84.8 mm (from Z=0.0 to Z=112.8).\n13. Finish turn diameter Ø30.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00040", "images": ["images/Shaft_00040.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.0 mm and length at least 255.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.5 mm over length 67.3 mm (from Z=0.0 to Z=204.8).\n10. Finish turn diameter Ø39.2 mm over length 86.2 mm (from Z=0.0 to Z=137.5).\n11. Finish turn diameter Ø30.0 mm over length 51.3 mm (from Z=0.0 to Z=51.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03594", "images": ["images/Shaft_03594.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.8 mm and length at least 141.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.8 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.2 mm over length 15.5 mm (from Z=0.0 to Z=114.6).\n9. Finish turn diameter Ø42.1 mm over length 51.1 mm (from Z=0.0 to Z=99.1).\n10. Finish turn diameter Ø30.0 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03100", "images": ["images/Shaft_03100.png", "detail_png/Shaft_03100_length.png", "detail_png/Shaft_03100_diam.png", "detail_png/Shaft_03100_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.6 mm and length at least 123.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.6 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.2 mm over length 46.9 mm (from Z=0.0 to Z=91.4).\n9. Finish turn diameter Ø30.0 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03467", "images": ["images/Shaft_03467.png", "detail_png/Shaft_03467_length.png", "detail_png/Shaft_03467_diam.png", "detail_png/Shaft_03467_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.3 mm and length at least 195.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.4 mm over length 10.1 mm (from Z=0.0 to Z=172.3).\n10. Finish turn diameter Ø44.9 mm over length 16.0 mm (from Z=0.0 to Z=162.2).\n11. Finish turn diameter Ø30.0 mm over length 146.2 mm (from Z=0.0 to Z=146.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02873", "images": ["images/Shaft_02873.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 185.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 138.4 mm (from Z=0.0 to Z=138.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04817", "images": ["images/Shaft_04817.png", "detail_png/Shaft_04817_length.png", "detail_png/Shaft_04817_diam.png", "detail_png/Shaft_04817_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.9 mm and length at least 203.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 75.0 mm (from Z=0.0 to Z=109.6).\n10. Finish turn diameter Ø30.0 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01879", "images": ["images/Shaft_01879.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.2 mm and length at least 243.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.2 mm over length 11.9 mm (from Z=0.0 to Z=177.6).\n10. Finish turn diameter Ø58.1 mm over length 43.5 mm (from Z=0.0 to Z=165.7).\n11. Finish turn diameter Ø40.5 mm over length 43.3 mm (from Z=0.0 to Z=122.2).\n12. Finish turn diameter Ø30.0 mm over length 78.9 mm (from Z=0.0 to Z=78.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01676", "images": ["images/Shaft_01676.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.8 mm and length at least 174.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.8 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.7 mm over length 24.7 mm (from Z=0.0 to Z=139.1).\n9. Finish turn diameter Ø38.0 mm over length 54.8 mm (from Z=0.0 to Z=114.4).\n10. Finish turn diameter Ø30.0 mm over length 59.6 mm (from Z=0.0 to Z=59.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01693", "images": ["images/Shaft_01693.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.8 mm and length at least 300.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.6 mm over length 56.1 mm (from Z=0.0 to Z=248.8).\n10. Finish turn diameter Ø52.7 mm over length 60.7 mm (from Z=0.0 to Z=192.7).\n11. Finish turn diameter Ø44.3 mm over length 28.1 mm (from Z=0.0 to Z=132.0).\n12. Finish turn diameter Ø41.3 mm over length 38.0 mm (from Z=0.0 to Z=103.9).\n13. Finish turn diameter Ø31.3 mm over length 65.9 mm (from Z=0.0 to Z=65.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02945", "images": ["images/Shaft_02945.png", "detail_png/Shaft_02945_length.png", "detail_png/Shaft_02945_diam.png", "detail_png/Shaft_02945_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.2 mm and length at least 79.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.2 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.6 mm over length 14.1 mm (from Z=0.0 to Z=50.2).\n9. Finish turn diameter Ø30.0 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00565", "images": ["images/Shaft_00565.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.8 mm and length at least 298.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.6 mm over length 72.3 mm (from Z=0.0 to Z=265.4).\n10. Finish turn diameter Ø53.1 mm over length 94.5 mm (from Z=0.0 to Z=193.1).\n11. Finish turn diameter Ø43.3 mm over length 48.8 mm (from Z=0.0 to Z=98.6).\n12. Finish turn diameter Ø30.1 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00934", "images": ["images/Shaft_00934.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.5 mm and length at least 190.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 70.4 mm (from Z=0.0 to Z=130.9).\n9. Finish turn diameter Ø61.5 mm over length 42.5 mm (from Z=0.0 to Z=60.5).\n10. Finish turn diameter Ø47.6 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04563", "images": ["images/Shaft_04563.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.3 mm and length at least 173.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.3 mm over length 36.9 mm (from Z=0.0 to Z=122.0).\n9. Finish turn diameter Ø43.4 mm over length 20.9 mm (from Z=0.0 to Z=85.1).\n10. Finish turn diameter Ø30.0 mm over length 64.2 mm (from Z=0.0 to Z=64.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03739", "images": ["images/Shaft_03739.png", "detail_png/Shaft_03739_length.png", "detail_png/Shaft_03739_diam.png", "detail_png/Shaft_03739_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.9 mm and length at least 317.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 223.5 mm (from Z=0.0 to Z=223.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04517", "images": ["images/Shaft_04517.png", "detail_png/Shaft_04517_length.png", "detail_png/Shaft_04517_diam.png", "detail_png/Shaft_04517_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.3 mm and length at least 298.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 75.0 mm (from Z=0.0 to Z=75.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 218.7 mm (from Z=0.0 to Z=218.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03160", "images": ["images/Shaft_03160.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 89.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.5 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02605", "images": ["images/Shaft_02605.png", "detail_png/Shaft_02605_length.png", "detail_png/Shaft_02605_diam.png", "detail_png/Shaft_02605_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 284.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.1 mm (from Z=0.0 to Z=221.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01699", "images": ["images/Shaft_01699.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.4 mm and length at least 293.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 260.7 mm (from Z=0.0 to Z=260.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01525", "images": ["images/Shaft_01525.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.8 mm and length at least 70.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.3 mm over length 5.0 mm (from Z=0.0 to Z=47.3).\n9. Finish turn diameter Ø42.0 mm over length 18.1 mm (from Z=0.0 to Z=42.3).\n10. Finish turn diameter Ø30.0 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01089", "images": ["images/Shaft_01089.png", "detail_png/Shaft_01089_length.png", "detail_png/Shaft_01089_diam.png", "detail_png/Shaft_01089_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.1 mm and length at least 106.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 6.8 mm (from Z=0.0 to Z=6.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.0 mm over length 23.7 mm (from Z=0.0 to Z=94.9).\n9. Finish turn diameter Ø44.5 mm over length 29.7 mm (from Z=0.0 to Z=71.2).\n10. Finish turn diameter Ø30.0 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00349", "images": ["images/Shaft_00349.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.0 mm and length at least 312.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 88.3 mm (from Z=0.0 to Z=88.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 52.0 mm (from Z=0.0 to Z=219.1).\n10. Finish turn diameter Ø49.0 mm over length 39.1 mm (from Z=0.0 to Z=167.1).\n11. Finish turn diameter Ø36.6 mm over length 60.7 mm (from Z=0.0 to Z=128.0).\n12. Finish turn diameter Ø32.9 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00701", "images": ["images/Shaft_00701.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.1 mm and length at least 272.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.1 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.0 mm over length 113.6 mm (from Z=0.0 to Z=222.8).\n10. Finish turn diameter Ø59.4 mm over length 109.2 mm (from Z=0.0 to Z=109.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03580", "images": ["images/Shaft_03580.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.3 mm and length at least 191.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.4 mm over length 39.4 mm (from Z=0.0 to Z=148.9).\n9. Finish turn diameter Ø30.6 mm over length 80.7 mm (from Z=0.0 to Z=109.5).\n10. Finish turn diameter Ø30.0 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01174", "images": ["images/Shaft_01174.png", "detail_png/Shaft_01174_length.png", "detail_png/Shaft_01174_diam.png", "detail_png/Shaft_01174_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.4 mm and length at least 307.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 28.9 mm (from Z=0.0 to Z=217.9).\n10. Finish turn diameter Ø30.0 mm over length 189.0 mm (from Z=0.0 to Z=189.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02629", "images": ["images/Shaft_02629.png", "detail_png/Shaft_02629_length.png", "detail_png/Shaft_02629_diam.png", "detail_png/Shaft_02629_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.7 mm and length at least 260.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 113.6 mm (from Z=0.0 to Z=113.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.4 mm over length 98.6 mm (from Z=0.0 to Z=141.7).\n10. Finish turn diameter Ø31.2 mm over length 19.5 mm (from Z=0.0 to Z=43.1).\n11. Finish turn diameter Ø30.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01940", "images": ["images/Shaft_01940.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.5 mm and length at least 201.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.1 mm over length 37.3 mm (from Z=0.0 to Z=158.1).\n10. Finish turn diameter Ø30.0 mm over length 120.8 mm (from Z=0.0 to Z=120.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01004", "images": ["images/Shaft_01004.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.0 mm and length at least 270.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 77.8 mm (from Z=0.0 to Z=77.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 40.3 mm (from Z=0.0 to Z=187.7).\n10. Finish turn diameter Ø55.7 mm over length 69.5 mm (from Z=0.0 to Z=147.4).\n11. Finish turn diameter Ø50.2 mm over length 34.6 mm (from Z=0.0 to Z=77.9).\n12. Finish turn diameter Ø39.1 mm over length 15.0 mm (from Z=0.0 to Z=43.3).\n13. Finish turn diameter Ø30.0 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00026", "images": ["images/Shaft_00026.png", "detail_png/Shaft_00026_length.png", "detail_png/Shaft_00026_diam.png", "detail_png/Shaft_00026_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.1 mm and length at least 67.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.6 mm over length 5.0 mm (from Z=0.0 to Z=48.5).\n9. Finish turn diameter Ø51.7 mm over length 12.0 mm (from Z=0.0 to Z=43.5).\n10. Finish turn diameter Ø48.0 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03220", "images": ["images/Shaft_03220.png", "detail_png/Shaft_03220_length.png", "detail_png/Shaft_03220_diam.png", "detail_png/Shaft_03220_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.4 mm and length at least 103.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.4 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.4 mm over length 73.1 mm (from Z=0.0 to Z=81.2).\n9. Finish turn diameter Ø35.7 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01798", "images": ["images/Shaft_01798.png", "detail_png/Shaft_01798_length.png", "detail_png/Shaft_01798_diam.png", "detail_png/Shaft_01798_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.8 mm and length at least 111.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 22.3 mm (from Z=0.0 to Z=22.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.6 mm over length 23.5 mm (from Z=0.0 to Z=84.6).\n9. Finish turn diameter Ø32.4 mm over length 14.4 mm (from Z=0.0 to Z=61.1).\n10. Finish turn diameter Ø30.0 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03263", "images": ["images/Shaft_03263.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.3 mm and length at least 245.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 46.1 mm (from Z=0.0 to Z=46.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 194.5 mm (from Z=0.0 to Z=194.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04604", "images": ["images/Shaft_04604.png", "detail_png/Shaft_04604_length.png", "detail_png/Shaft_04604_diam.png", "detail_png/Shaft_04604_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.3 mm and length at least 91.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 23.3 mm (from Z=0.0 to Z=73.5).\n9. Finish turn diameter Ø40.0 mm over length 16.3 mm (from Z=0.0 to Z=50.2).\n10. Finish turn diameter Ø30.0 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00564", "images": ["images/Shaft_00564.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.9 mm and length at least 140.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.8 mm over length 6.4 mm (from Z=0.0 to Z=119.2).\n10. Finish turn diameter Ø30.0 mm over length 112.8 mm (from Z=0.0 to Z=112.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04564", "images": ["images/Shaft_04564.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.1 mm and length at least 84.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.4 mm over length 21.2 mm (from Z=0.0 to Z=70.1).\n9. Finish turn diameter Ø30.0 mm over length 48.9 mm (from Z=0.0 to Z=48.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03476", "images": ["images/Shaft_03476.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.5 mm and length at least 303.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.5 mm over length 121.8 mm (from Z=0.0 to Z=121.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 176.5 mm (from Z=0.0 to Z=176.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03115", "images": ["images/Shaft_03115.png", "detail_png/Shaft_03115_length.png", "detail_png/Shaft_03115_diam.png", "detail_png/Shaft_03115_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.6 mm and length at least 247.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.6 mm over length 75.9 mm (from Z=0.0 to Z=201.6).\n10. Finish turn diameter Ø38.9 mm over length 125.7 mm (from Z=0.0 to Z=125.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00406", "images": ["images/Shaft_00406.png", "detail_png/Shaft_00406_length.png", "detail_png/Shaft_00406_diam.png", "detail_png/Shaft_00406_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.2 mm and length at least 69.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.2 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.8 mm over length 15.2 mm (from Z=0.0 to Z=55.0).\n9. Finish turn diameter Ø51.6 mm over length 32.8 mm (from Z=0.0 to Z=39.8).\n10. Finish turn diameter Ø32.8 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02041", "images": ["images/Shaft_02041.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.5 mm and length at least 120.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.4 mm over length 22.1 mm (from Z=0.0 to Z=83.3).\n9. Finish turn diameter Ø44.5 mm over length 19.5 mm (from Z=0.0 to Z=61.2).\n10. Finish turn diameter Ø33.2 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02072", "images": ["images/Shaft_02072.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.4 mm and length at least 81.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.4 mm over length 28.2 mm (from Z=0.0 to Z=53.4).\n9. Finish turn diameter Ø30.0 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03051", "images": ["images/Shaft_03051.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 222.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 190.1 mm (from Z=0.0 to Z=190.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.6 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01196", "images": ["images/Shaft_01196.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.4 mm and length at least 75.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04809", "images": ["images/Shaft_04809.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.7 mm and length at least 77.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.5 mm over length 18.9 mm (from Z=0.0 to Z=67.0).\n9. Finish turn diameter Ø33.0 mm over length 5.0 mm (from Z=0.0 to Z=48.1).\n10. Finish turn diameter Ø30.0 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03780", "images": ["images/Shaft_03780.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.5 mm and length at least 231.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.8 mm (from Z=0.0 to Z=204.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03602", "images": ["images/Shaft_03602.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.7 mm and length at least 146.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.7 mm over length 36.8 mm (from Z=0.0 to Z=36.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.9 mm over length 33.4 mm (from Z=0.0 to Z=104.5).\n9. Finish turn diameter Ø30.0 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00483", "images": ["images/Shaft_00483.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.8 mm and length at least 218.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.2 mm over length 52.8 mm (from Z=0.0 to Z=184.5).\n10. Finish turn diameter Ø47.5 mm over length 25.2 mm (from Z=0.0 to Z=131.7).\n11. Finish turn diameter Ø43.1 mm over length 20.4 mm (from Z=0.0 to Z=106.5).\n12. Finish turn diameter Ø36.7 mm over length 36.8 mm (from Z=0.0 to Z=86.1).\n13. Finish turn diameter Ø30.0 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04238", "images": ["images/Shaft_04238.png", "detail_png/Shaft_04238_length.png", "detail_png/Shaft_04238_diam.png", "detail_png/Shaft_04238_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.4 mm and length at least 285.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 83.9 mm (from Z=0.0 to Z=230.2).\n10. Finish turn diameter Ø30.0 mm over length 146.3 mm (from Z=0.0 to Z=146.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00431", "images": ["images/Shaft_00431.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.6 mm and length at least 299.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.0 mm over length 54.9 mm (from Z=0.0 to Z=242.3).\n10. Finish turn diameter Ø30.0 mm over length 187.4 mm (from Z=0.0 to Z=187.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02077", "images": ["images/Shaft_02077.png", "detail_png/Shaft_02077_length.png", "detail_png/Shaft_02077_diam.png", "detail_png/Shaft_02077_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.6 mm and length at least 283.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.9 mm over length 40.7 mm (from Z=0.0 to Z=184.1).\n10. Finish turn diameter Ø46.4 mm over length 57.4 mm (from Z=0.0 to Z=143.4).\n11. Finish turn diameter Ø34.8 mm over length 86.0 mm (from Z=0.0 to Z=86.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00171", "images": ["images/Shaft_00171.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.6 mm and length at least 306.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.6 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.0 mm over length 86.1 mm (from Z=0.0 to Z=290.3).\n10. Finish turn diameter Ø53.0 mm over length 111.8 mm (from Z=0.0 to Z=204.2).\n11. Finish turn diameter Ø36.5 mm over length 45.5 mm (from Z=0.0 to Z=92.4).\n12. Finish turn diameter Ø30.0 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03997", "images": ["images/Shaft_03997.png", "detail_png/Shaft_03997_length.png", "detail_png/Shaft_03997_diam.png", "detail_png/Shaft_03997_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.0 mm and length at least 274.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 53.2 mm (from Z=0.0 to Z=185.4).\n10. Finish turn diameter Ø51.9 mm over length 63.6 mm (from Z=0.0 to Z=132.2).\n11. Finish turn diameter Ø34.8 mm over length 68.6 mm (from Z=0.0 to Z=68.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00417", "images": ["images/Shaft_00417.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.2 mm and length at least 301.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.6 mm (from Z=0.0 to Z=229.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00433", "images": ["images/Shaft_00433.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.4 mm and length at least 116.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.4 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.2 mm over length 25.4 mm (from Z=0.0 to Z=83.6).\n9. Finish turn diameter Ø30.0 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00454", "images": ["images/Shaft_00454.png", "detail_png/Shaft_00454_length.png", "detail_png/Shaft_00454_diam.png", "detail_png/Shaft_00454_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.1 mm and length at least 277.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 207.9 mm (from Z=0.0 to Z=207.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01872", "images": ["images/Shaft_01872.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.0 mm and length at least 191.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.0 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.7 mm over length 19.5 mm (from Z=0.0 to Z=177.2).\n10. Finish turn diameter Ø30.0 mm over length 157.7 mm (from Z=0.0 to Z=157.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01793", "images": ["images/Shaft_01793.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.9 mm and length at least 236.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 69.3 mm (from Z=0.0 to Z=69.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 162.6 mm (from Z=0.0 to Z=162.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00206", "images": ["images/Shaft_00206.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.5 mm and length at least 139.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 17.3 mm (from Z=0.0 to Z=109.3).\n10. Finish turn diameter Ø30.0 mm over length 92.0 mm (from Z=0.0 to Z=92.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00426", "images": ["images/Shaft_00426.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.8 mm and length at least 303.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.9 mm over length 43.5 mm (from Z=0.0 to Z=261.8).\n10. Finish turn diameter Ø38.8 mm over length 52.2 mm (from Z=0.0 to Z=218.3).\n11. Finish turn diameter Ø30.6 mm over length 45.7 mm (from Z=0.0 to Z=166.1).\n12. Finish turn diameter Ø30.0 mm over length 120.4 mm (from Z=0.0 to Z=120.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02111", "images": ["images/Shaft_02111.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.8 mm and length at least 315.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 280.9 mm (from Z=0.0 to Z=280.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04562", "images": ["images/Shaft_04562.png", "detail_png/Shaft_04562_length.png", "detail_png/Shaft_04562_diam.png", "detail_png/Shaft_04562_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.0 mm and length at least 99.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.2 mm over length 9.8 mm (from Z=0.0 to Z=72.8).\n9. Finish turn diameter Ø30.0 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01095", "images": ["images/Shaft_01095.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.4 mm and length at least 245.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 57.6 mm (from Z=0.0 to Z=173.3).\n10. Finish turn diameter Ø30.0 mm over length 115.7 mm (from Z=0.0 to Z=115.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02882", "images": ["images/Shaft_02882.png", "detail_png/Shaft_02882_length.png", "detail_png/Shaft_02882_diam.png", "detail_png/Shaft_02882_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.9 mm and length at least 235.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 79.1 mm (from Z=0.0 to Z=79.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 130.8 mm (from Z=0.0 to Z=150.9).\n10. Finish turn diameter Ø47.6 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00191", "images": ["images/Shaft_00191.png", "detail_png/Shaft_00191_length.png", "detail_png/Shaft_00191_diam.png", "detail_png/Shaft_00191_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.4 mm and length at least 211.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.4 mm over length 53.6 mm (from Z=0.0 to Z=156.7).\n10. Finish turn diameter Ø30.0 mm over length 103.1 mm (from Z=0.0 to Z=103.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04812", "images": ["images/Shaft_04812.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.0 mm and length at least 136.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.8 mm over length 25.0 mm (from Z=0.0 to Z=93.5).\n9. Finish turn diameter Ø34.6 mm over length 11.1 mm (from Z=0.0 to Z=68.5).\n10. Finish turn diameter Ø30.0 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03698", "images": ["images/Shaft_03698.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.3 mm and length at least 213.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 153.0 mm (from Z=0.0 to Z=153.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03774", "images": ["images/Shaft_03774.png", "detail_png/Shaft_03774_length.png", "detail_png/Shaft_03774_diam.png", "detail_png/Shaft_03774_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.7 mm and length at least 196.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 79.5 mm (from Z=0.0 to Z=133.6).\n10. Finish turn diameter Ø37.5 mm over length 35.3 mm (from Z=0.0 to Z=54.1).\n11. Finish turn diameter Ø30.0 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01992", "images": ["images/Shaft_01992.png", "detail_png/Shaft_01992_length.png", "detail_png/Shaft_01992_diam.png", "detail_png/Shaft_01992_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.5 mm and length at least 152.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.4 mm over length 27.3 mm (from Z=0.0 to Z=142.8).\n9. Finish turn diameter Ø56.9 mm over length 26.2 mm (from Z=0.0 to Z=115.5).\n10. Finish turn diameter Ø50.2 mm over length 24.7 mm (from Z=0.0 to Z=89.3).\n11. Finish turn diameter Ø46.2 mm over length 15.4 mm (from Z=0.0 to Z=64.6).\n12. Finish turn diameter Ø35.8 mm over length 49.2 mm (from Z=0.0 to Z=49.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04099", "images": ["images/Shaft_04099.png", "detail_png/Shaft_04099_length.png", "detail_png/Shaft_04099_diam.png", "detail_png/Shaft_04099_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.7 mm and length at least 122.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.8 mm over length 27.1 mm (from Z=0.0 to Z=106.1).\n9. Finish turn diameter Ø30.0 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04589", "images": ["images/Shaft_04589.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.5 mm and length at least 115.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.8 mm over length 41.9 mm (from Z=0.0 to Z=93.5).\n9. Finish turn diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03117", "images": ["images/Shaft_03117.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.2 mm and length at least 110.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 21.2 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø41.4 mm over length 20.3 mm (from Z=0.0 to Z=64.6).\n10. Finish turn diameter Ø30.0 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03641", "images": ["images/Shaft_03641.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.9 mm and length at least 184.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.4 mm over length 42.3 mm (from Z=0.0 to Z=127.5).\n9. Finish turn diameter Ø30.0 mm over length 85.2 mm (from Z=0.0 to Z=85.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02644", "images": ["images/Shaft_02644.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 113.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.5 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01763", "images": ["images/Shaft_01763.png", "detail_png/Shaft_01763_length.png", "detail_png/Shaft_01763_diam.png", "detail_png/Shaft_01763_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.8 mm and length at least 173.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.4 mm over length 52.4 mm (from Z=0.0 to Z=114.0).\n9. Finish turn diameter Ø33.4 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01383", "images": ["images/Shaft_01383.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.3 mm and length at least 184.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 104.1 mm (from Z=0.0 to Z=104.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.4 mm (from Z=0.0 to Z=75.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02537", "images": ["images/Shaft_02537.png", "detail_png/Shaft_02537_length.png", "detail_png/Shaft_02537_diam.png", "detail_png/Shaft_02537_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.7 mm and length at least 156.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.4 mm over length 34.0 mm (from Z=0.0 to Z=105.9).\n9. Finish turn diameter Ø36.1 mm over length 22.1 mm (from Z=0.0 to Z=71.9).\n10. Finish turn diameter Ø30.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04658", "images": ["images/Shaft_04658.png", "detail_png/Shaft_04658_length.png", "detail_png/Shaft_04658_diam.png", "detail_png/Shaft_04658_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.5 mm and length at least 300.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 222.8 mm (from Z=0.0 to Z=222.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03172", "images": ["images/Shaft_03172.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.3 mm and length at least 245.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.3 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.3 mm over length 71.2 mm (from Z=0.0 to Z=161.0).\n10. Finish turn diameter Ø47.1 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04108", "images": ["images/Shaft_04108.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.8 mm and length at least 322.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.3 mm over length 84.6 mm (from Z=0.0 to Z=293.5).\n10. Finish turn diameter Ø34.5 mm over length 95.1 mm (from Z=0.0 to Z=208.9).\n11. Finish turn diameter Ø30.7 mm over length 113.8 mm (from Z=0.0 to Z=113.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00649", "images": ["images/Shaft_00649.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.8 mm and length at least 276.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 76.4 mm (from Z=0.0 to Z=248.6).\n10. Finish turn diameter Ø43.2 mm over length 172.2 mm (from Z=0.0 to Z=172.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01462", "images": ["images/Shaft_01462.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.2 mm and length at least 218.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.2 mm over length 97.5 mm (from Z=0.0 to Z=97.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 115.8 mm (from Z=0.0 to Z=115.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03026", "images": ["images/Shaft_03026.png", "detail_png/Shaft_03026_length.png", "detail_png/Shaft_03026_diam.png", "detail_png/Shaft_03026_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 150.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.9 mm (from Z=0.0 to Z=107.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.3 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04575", "images": ["images/Shaft_04575.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.2 mm and length at least 109.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.8 mm over length 12.7 mm (from Z=0.0 to Z=80.9).\n9. Finish turn diameter Ø51.4 mm over length 23.1 mm (from Z=0.0 to Z=68.2).\n10. Finish turn diameter Ø42.2 mm over length 18.6 mm (from Z=0.0 to Z=45.1).\n11. Finish turn diameter Ø30.0 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00074", "images": ["images/Shaft_00074.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.0 mm and length at least 261.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.0 mm over length 85.5 mm (from Z=0.0 to Z=182.7).\n10. Finish turn diameter Ø46.0 mm over length 80.1 mm (from Z=0.0 to Z=97.2).\n11. Finish turn diameter Ø41.4 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00192", "images": ["images/Shaft_00192.png", "detail_png/Shaft_00192_length.png", "detail_png/Shaft_00192_diam.png", "detail_png/Shaft_00192_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.6 mm and length at least 261.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 35.6 mm (from Z=0.0 to Z=35.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 220.5 mm (from Z=0.0 to Z=220.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03378", "images": ["images/Shaft_03378.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.8 mm and length at least 247.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 26.3 mm (from Z=0.0 to Z=190.8).\n10. Finish turn diameter Ø30.0 mm over length 164.5 mm (from Z=0.0 to Z=164.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04716", "images": ["images/Shaft_04716.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 238.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 203.0 mm (from Z=0.0 to Z=203.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.0 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02878", "images": ["images/Shaft_02878.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.2 mm and length at least 318.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.4 mm over length 36.3 mm (from Z=0.0 to Z=300.7).\n10. Finish turn diameter Ø52.4 mm over length 20.2 mm (from Z=0.0 to Z=264.4).\n11. Finish turn diameter Ø48.2 mm over length 136.6 mm (from Z=0.0 to Z=244.2).\n12. Finish turn diameter Ø32.5 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01243", "images": ["images/Shaft_01243.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.1 mm and length at least 257.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 222.7 mm (from Z=0.0 to Z=222.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03522", "images": ["images/Shaft_03522.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.2 mm and length at least 235.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 111.2 mm (from Z=0.0 to Z=111.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.6 mm (from Z=0.0 to Z=119.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01703", "images": ["images/Shaft_01703.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.4 mm and length at least 318.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 156.6 mm (from Z=0.0 to Z=156.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 156.7 mm (from Z=0.0 to Z=156.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04823", "images": ["images/Shaft_04823.png", "detail_png/Shaft_04823_length.png", "detail_png/Shaft_04823_diam.png", "detail_png/Shaft_04823_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.3 mm and length at least 196.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 52.8 mm (from Z=0.0 to Z=52.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.7 mm over length 47.7 mm (from Z=0.0 to Z=138.2).\n10. Finish turn diameter Ø40.9 mm over length 40.1 mm (from Z=0.0 to Z=90.5).\n11. Finish turn diameter Ø30.0 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02015", "images": ["images/Shaft_02015.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.3 mm and length at least 67.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.7 mm over length 18.0 mm (from Z=0.0 to Z=42.2).\n9. Finish turn diameter Ø30.0 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03066", "images": ["images/Shaft_03066.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.7 mm and length at least 248.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.7 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 10.6 mm (from Z=0.0 to Z=202.7).\n10. Finish turn diameter Ø48.7 mm over length 15.9 mm (from Z=0.0 to Z=192.1).\n11. Finish turn diameter Ø38.0 mm over length 98.5 mm (from Z=0.0 to Z=176.2).\n12. Finish turn diameter Ø30.0 mm over length 77.7 mm (from Z=0.0 to Z=77.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03352", "images": ["images/Shaft_03352.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.4 mm and length at least 295.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.6 mm over length 59.4 mm (from Z=0.0 to Z=237.7).\n10. Finish turn diameter Ø39.9 mm over length 63.2 mm (from Z=0.0 to Z=178.3).\n11. Finish turn diameter Ø30.0 mm over length 115.1 mm (from Z=0.0 to Z=115.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00817", "images": ["images/Shaft_00817.png", "detail_png/Shaft_00817_length.png", "detail_png/Shaft_00817_diam.png", "detail_png/Shaft_00817_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.4 mm and length at least 269.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 94.0 mm (from Z=0.0 to Z=94.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.4 mm over length 39.2 mm (from Z=0.0 to Z=170.9).\n10. Finish turn diameter Ø30.0 mm over length 131.7 mm (from Z=0.0 to Z=131.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00709", "images": ["images/Shaft_00709.png", "detail_png/Shaft_00709_length.png", "detail_png/Shaft_00709_diam.png", "detail_png/Shaft_00709_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.4 mm and length at least 122.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.3 mm over length 57.3 mm (from Z=0.0 to Z=102.0).\n9. Finish turn diameter Ø43.6 mm over length 30.8 mm (from Z=0.0 to Z=44.7).\n10. Finish turn diameter Ø30.0 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00528", "images": ["images/Shaft_00528.png", "detail_png/Shaft_00528_length.png", "detail_png/Shaft_00528_diam.png", "detail_png/Shaft_00528_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.8 mm and length at least 262.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.8 mm over length 9.6 mm (from Z=0.0 to Z=9.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 46.6 mm (from Z=0.0 to Z=247.8).\n10. Finish turn diameter Ø43.7 mm over length 97.3 mm (from Z=0.0 to Z=201.2).\n11. Finish turn diameter Ø30.0 mm over length 103.9 mm (from Z=0.0 to Z=103.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01977", "images": ["images/Shaft_01977.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.8 mm and length at least 284.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.8 mm over length 171.4 mm (from Z=0.0 to Z=197.4).\n10. Finish turn diameter Ø39.4 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04280", "images": ["images/Shaft_04280.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.7 mm and length at least 204.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.9 mm over length 29.5 mm (from Z=0.0 to Z=150.8).\n10. Finish turn diameter Ø42.0 mm over length 49.1 mm (from Z=0.0 to Z=121.3).\n11. Finish turn diameter Ø34.2 mm over length 13.2 mm (from Z=0.0 to Z=72.2).\n12. Finish turn diameter Ø30.0 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01156", "images": ["images/Shaft_01156.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.5 mm and length at least 114.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.9 mm over length 12.6 mm (from Z=0.0 to Z=71.2).\n9. Finish turn diameter Ø32.3 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00848", "images": ["images/Shaft_00848.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.5 mm and length at least 255.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.4 mm over length 43.9 mm (from Z=0.0 to Z=219.8).\n10. Finish turn diameter Ø52.6 mm over length 59.2 mm (from Z=0.0 to Z=175.9).\n11. Finish turn diameter Ø42.8 mm over length 60.7 mm (from Z=0.0 to Z=116.7).\n12. Finish turn diameter Ø30.0 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04151", "images": ["images/Shaft_04151.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.1 mm and length at least 310.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 237.1 mm (from Z=0.0 to Z=237.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04578", "images": ["images/Shaft_04578.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.6 mm and length at least 140.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 113.1 mm (from Z=0.0 to Z=113.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01475", "images": ["images/Shaft_01475.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.1 mm and length at least 139.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.1 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01707", "images": ["images/Shaft_01707.png", "detail_png/Shaft_01707_length.png", "detail_png/Shaft_01707_diam.png", "detail_png/Shaft_01707_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 134.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.9 mm (from Z=0.0 to Z=107.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04765", "images": ["images/Shaft_04765.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.2 mm and length at least 318.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 86.6 mm (from Z=0.0 to Z=86.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.4 mm over length 31.9 mm (from Z=0.0 to Z=227.2).\n10. Finish turn diameter Ø30.0 mm over length 195.3 mm (from Z=0.0 to Z=195.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04725", "images": ["images/Shaft_04725.png", "detail_png/Shaft_04725_length.png", "detail_png/Shaft_04725_diam.png", "detail_png/Shaft_04725_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.8 mm and length at least 223.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 23.7 mm (from Z=0.0 to Z=164.7).\n10. Finish turn diameter Ø55.5 mm over length 50.0 mm (from Z=0.0 to Z=141.0).\n11. Finish turn diameter Ø39.2 mm over length 30.6 mm (from Z=0.0 to Z=91.0).\n12. Finish turn diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02713", "images": ["images/Shaft_02713.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.6 mm and length at least 292.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.2 mm over length 114.8 mm (from Z=0.0 to Z=273.0).\n10. Finish turn diameter Ø38.4 mm over length 25.6 mm (from Z=0.0 to Z=158.2).\n11. Finish turn diameter Ø35.4 mm over length 132.6 mm (from Z=0.0 to Z=132.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01918", "images": ["images/Shaft_01918.png", "detail_png/Shaft_01918_length.png", "detail_png/Shaft_01918_diam.png", "detail_png/Shaft_01918_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.8 mm and length at least 206.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.0 mm over length 22.6 mm (from Z=0.0 to Z=192.4).\n10. Finish turn diameter Ø30.0 mm over length 169.8 mm (from Z=0.0 to Z=169.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02737", "images": ["images/Shaft_02737.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 68.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.2 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02853", "images": ["images/Shaft_02853.png", "detail_png/Shaft_02853_length.png", "detail_png/Shaft_02853_diam.png", "detail_png/Shaft_02853_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.1 mm and length at least 238.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.0 mm over length 24.7 mm (from Z=0.0 to Z=186.2).\n10. Finish turn diameter Ø35.0 mm over length 50.8 mm (from Z=0.0 to Z=161.5).\n11. Finish turn diameter Ø30.0 mm over length 110.7 mm (from Z=0.0 to Z=110.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02407", "images": ["images/Shaft_02407.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.3 mm and length at least 321.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 85.6 mm (from Z=0.0 to Z=85.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.7 mm over length 103.3 mm (from Z=0.0 to Z=231.0).\n10. Finish turn diameter Ø34.7 mm over length 34.9 mm (from Z=0.0 to Z=127.7).\n11. Finish turn diameter Ø30.0 mm over length 92.8 mm (from Z=0.0 to Z=92.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00899", "images": ["images/Shaft_00899.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.9 mm and length at least 77.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 12.6 mm (from Z=0.0 to Z=12.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.1 mm over length 22.8 mm (from Z=0.0 to Z=60.0).\n9. Finish turn diameter Ø55.7 mm over length 11.4 mm (from Z=0.0 to Z=37.2).\n10. Finish turn diameter Ø51.8 mm over length 20.1 mm (from Z=0.0 to Z=25.8).\n11. Finish turn diameter Ø40.1 mm over length 5.7 mm (from Z=0.0 to Z=5.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02079", "images": ["images/Shaft_02079.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.3 mm and length at least 206.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.3 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.0 mm over length 66.7 mm (from Z=0.0 to Z=171.5).\n10. Finish turn diameter Ø30.0 mm over length 104.8 mm (from Z=0.0 to Z=104.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04263", "images": ["images/Shaft_04263.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 161.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 122.3 mm (from Z=0.0 to Z=122.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04351", "images": ["images/Shaft_04351.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.5 mm and length at least 247.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 54.7 mm (from Z=0.0 to Z=199.7).\n10. Finish turn diameter Ø35.5 mm over length 61.8 mm (from Z=0.0 to Z=145.0).\n11. Finish turn diameter Ø30.0 mm over length 83.2 mm (from Z=0.0 to Z=83.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03992", "images": ["images/Shaft_03992.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.7 mm and length at least 143.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.9 mm over length 36.2 mm (from Z=0.0 to Z=96.2).\n9. Finish turn diameter Ø30.0 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01922", "images": ["images/Shaft_01922.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.9 mm and length at least 266.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 70.5 mm (from Z=0.0 to Z=70.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 77.7 mm (from Z=0.0 to Z=190.9).\n10. Finish turn diameter Ø31.0 mm over length 40.0 mm (from Z=0.0 to Z=113.2).\n11. Finish turn diameter Ø30.0 mm over length 73.2 mm (from Z=0.0 to Z=73.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00787", "images": ["images/Shaft_00787.png", "detail_png/Shaft_00787_length.png", "detail_png/Shaft_00787_diam.png", "detail_png/Shaft_00787_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.3 mm and length at least 120.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.3 mm over length 5.6 mm (from Z=0.0 to Z=73.3).\n9. Finish turn diameter Ø30.0 mm over length 67.7 mm (from Z=0.0 to Z=67.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02924", "images": ["images/Shaft_02924.png", "detail_png/Shaft_02924_length.png", "detail_png/Shaft_02924_diam.png", "detail_png/Shaft_02924_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.3 mm and length at least 166.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 16.5 mm (from Z=0.0 to Z=132.4).\n10. Finish turn diameter Ø35.6 mm over length 11.2 mm (from Z=0.0 to Z=115.9).\n11. Finish turn diameter Ø30.0 mm over length 104.7 mm (from Z=0.0 to Z=104.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04009", "images": ["images/Shaft_04009.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.1 mm and length at least 295.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.4 mm over length 53.5 mm (from Z=0.0 to Z=269.1).\n10. Finish turn diameter Ø50.5 mm over length 84.7 mm (from Z=0.0 to Z=215.6).\n11. Finish turn diameter Ø41.1 mm over length 87.6 mm (from Z=0.0 to Z=130.9).\n12. Finish turn diameter Ø32.1 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00085", "images": ["images/Shaft_00085.png", "detail_png/Shaft_00085_length.png", "detail_png/Shaft_00085_diam.png", "detail_png/Shaft_00085_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.1 mm and length at least 277.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 66.1 mm (from Z=0.0 to Z=66.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.5 mm over length 13.3 mm (from Z=0.0 to Z=206.3).\n10. Finish turn diameter Ø44.0 mm over length 50.5 mm (from Z=0.0 to Z=193.0).\n11. Finish turn diameter Ø30.8 mm over length 105.5 mm (from Z=0.0 to Z=142.5).\n12. Finish turn diameter Ø30.0 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03155", "images": ["images/Shaft_03155.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 163.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 38.3 mm (from Z=0.0 to Z=123.2).\n9. Finish turn diameter Ø30.0 mm over length 84.9 mm (from Z=0.0 to Z=84.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04324", "images": ["images/Shaft_04324.png", "detail_png/Shaft_04324_length.png", "detail_png/Shaft_04324_diam.png", "detail_png/Shaft_04324_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.6 mm and length at least 115.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.2 mm over length 63.6 mm (from Z=0.0 to Z=99.8).\n9. Finish turn diameter Ø61.8 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04082", "images": ["images/Shaft_04082.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.3 mm and length at least 304.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.7 mm over length 50.3 mm (from Z=0.0 to Z=279.4).\n10. Finish turn diameter Ø30.0 mm over length 229.1 mm (from Z=0.0 to Z=229.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03347", "images": ["images/Shaft_03347.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.1 mm and length at least 174.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.9 mm over length 33.3 mm (from Z=0.0 to Z=145.4).\n9. Finish turn diameter Ø63.8 mm over length 10.5 mm (from Z=0.0 to Z=112.1).\n10. Finish turn diameter Ø43.9 mm over length 42.2 mm (from Z=0.0 to Z=101.6).\n11. Finish turn diameter Ø31.5 mm over length 28.4 mm (from Z=0.0 to Z=59.4).\n12. Finish turn diameter Ø30.0 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02844", "images": ["images/Shaft_02844.png", "detail_png/Shaft_02844_length.png", "detail_png/Shaft_02844_diam.png", "detail_png/Shaft_02844_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.3 mm and length at least 173.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 101.4 mm (from Z=0.0 to Z=101.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.2 mm over length 38.9 mm (from Z=0.0 to Z=66.9).\n9. Finish turn diameter Ø30.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01938", "images": ["images/Shaft_01938.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.0 mm and length at least 275.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.0 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 214.5 mm (from Z=0.0 to Z=214.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03795", "images": ["images/Shaft_03795.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.2 mm and length at least 126.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 76.0 mm (from Z=0.0 to Z=76.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03202", "images": ["images/Shaft_03202.png", "detail_png/Shaft_03202_length.png", "detail_png/Shaft_03202_diam.png", "detail_png/Shaft_03202_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.2 mm and length at least 77.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.2 mm over length 9.6 mm (from Z=0.0 to Z=9.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.4 mm over length 13.1 mm (from Z=0.0 to Z=63.0).\n9. Finish turn diameter Ø30.0 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03131", "images": ["images/Shaft_03131.png", "detail_png/Shaft_03131_length.png", "detail_png/Shaft_03131_diam.png", "detail_png/Shaft_03131_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.7 mm and length at least 233.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.5 mm over length 56.9 mm (from Z=0.0 to Z=215.6).\n10. Finish turn diameter Ø30.0 mm over length 158.7 mm (from Z=0.0 to Z=158.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04857", "images": ["images/Shaft_04857.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.9 mm and length at least 248.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.7 mm over length 13.5 mm (from Z=0.0 to Z=167.1).\n10. Finish turn diameter Ø38.7 mm over length 46.8 mm (from Z=0.0 to Z=153.6).\n11. Finish turn diameter Ø34.6 mm over length 37.9 mm (from Z=0.0 to Z=106.8).\n12. Finish turn diameter Ø30.0 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01293", "images": ["images/Shaft_01293.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.8 mm and length at least 161.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.5 mm over length 30.6 mm (from Z=0.0 to Z=137.9).\n9. Finish turn diameter Ø39.1 mm over length 28.8 mm (from Z=0.0 to Z=107.3).\n10. Finish turn diameter Ø30.0 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02360", "images": ["images/Shaft_02360.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.5 mm and length at least 217.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.2 mm over length 40.2 mm (from Z=0.0 to Z=202.6).\n10. Finish turn diameter Ø51.1 mm over length 29.9 mm (from Z=0.0 to Z=162.4).\n11. Finish turn diameter Ø42.6 mm over length 47.6 mm (from Z=0.0 to Z=132.5).\n12. Finish turn diameter Ø30.0 mm over length 84.9 mm (from Z=0.0 to Z=84.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02580", "images": ["images/Shaft_02580.png", "detail_png/Shaft_02580_length.png", "detail_png/Shaft_02580_diam.png", "detail_png/Shaft_02580_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.6 mm and length at least 120.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 110.7 mm (from Z=0.0 to Z=110.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03629", "images": ["images/Shaft_03629.png", "detail_png/Shaft_03629_length.png", "detail_png/Shaft_03629_diam.png", "detail_png/Shaft_03629_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.2 mm and length at least 158.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.0 mm over length 18.6 mm (from Z=0.0 to Z=120.8).\n10. Finish turn diameter Ø30.0 mm over length 102.2 mm (from Z=0.0 to Z=102.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02163", "images": ["images/Shaft_02163.png", "detail_png/Shaft_02163_length.png", "detail_png/Shaft_02163_diam.png", "detail_png/Shaft_02163_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.0 mm and length at least 226.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.0 mm over length 76.8 mm (from Z=0.0 to Z=76.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 144.5 mm (from Z=0.0 to Z=144.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00248", "images": ["images/Shaft_00248.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.2 mm and length at least 115.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.0 mm over length 5.0 mm (from Z=0.0 to Z=80.9).\n9. Finish turn diameter Ø36.1 mm over length 28.1 mm (from Z=0.0 to Z=75.9).\n10. Finish turn diameter Ø30.0 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00949", "images": ["images/Shaft_00949.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.1 mm and length at least 213.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.6 mm over length 56.3 mm (from Z=0.0 to Z=158.3).\n10. Finish turn diameter Ø38.1 mm over length 32.2 mm (from Z=0.0 to Z=102.0).\n11. Finish turn diameter Ø30.0 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01998", "images": ["images/Shaft_01998.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.5 mm and length at least 69.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.8 mm over length 5.8 mm (from Z=0.0 to Z=44.6).\n9. Finish turn diameter Ø60.5 mm over length 22.2 mm (from Z=0.0 to Z=38.8).\n10. Finish turn diameter Ø56.0 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02504", "images": ["images/Shaft_02504.png", "detail_png/Shaft_02504_length.png", "detail_png/Shaft_02504_diam.png", "detail_png/Shaft_02504_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.4 mm and length at least 293.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.3 mm (from Z=0.0 to Z=229.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03661", "images": ["images/Shaft_03661.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.0 mm and length at least 92.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 5.6 mm (from Z=0.0 to Z=33.3).\n9. Finish turn diameter Ø54.9 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02985", "images": ["images/Shaft_02985.png", "detail_png/Shaft_02985_length.png", "detail_png/Shaft_02985_diam.png", "detail_png/Shaft_02985_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.9 mm and length at least 173.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.4 mm over length 44.8 mm (from Z=0.0 to Z=160.7).\n10. Finish turn diameter Ø30.0 mm over length 115.9 mm (from Z=0.0 to Z=115.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04184", "images": ["images/Shaft_04184.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.9 mm and length at least 233.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 89.5 mm (from Z=0.0 to Z=89.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 139.1 mm (from Z=0.0 to Z=139.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01637", "images": ["images/Shaft_01637.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.8 mm and length at least 321.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 295.8 mm (from Z=0.0 to Z=295.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03366", "images": ["images/Shaft_03366.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 82.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 52.7 mm (from Z=0.0 to Z=52.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.8 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04994", "images": ["images/Shaft_04994.png", "detail_png/Shaft_04994_length.png", "detail_png/Shaft_04994_diam.png", "detail_png/Shaft_04994_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.4 mm and length at least 165.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.3 mm over length 55.4 mm (from Z=0.0 to Z=137.6).\n9. Finish turn diameter Ø41.2 mm over length 51.2 mm (from Z=0.0 to Z=82.2).\n10. Finish turn diameter Ø38.2 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01191", "images": ["images/Shaft_01191.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.1 mm and length at least 96.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.3 mm over length 12.4 mm (from Z=0.0 to Z=77.4).\n9. Finish turn diameter Ø30.0 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04124", "images": ["images/Shaft_04124.png", "detail_png/Shaft_04124_length.png", "detail_png/Shaft_04124_diam.png", "detail_png/Shaft_04124_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 158.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 117.1 mm (from Z=0.0 to Z=117.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.0 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02440", "images": ["images/Shaft_02440.png", "detail_png/Shaft_02440_length.png", "detail_png/Shaft_02440_diam.png", "detail_png/Shaft_02440_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.5 mm and length at least 223.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.8 mm over length 32.6 mm (from Z=0.0 to Z=176.4).\n10. Finish turn diameter Ø34.8 mm over length 7.7 mm (from Z=0.0 to Z=143.8).\n11. Finish turn diameter Ø30.0 mm over length 136.1 mm (from Z=0.0 to Z=136.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04063", "images": ["images/Shaft_04063.png", "detail_png/Shaft_04063_length.png", "detail_png/Shaft_04063_diam.png", "detail_png/Shaft_04063_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 165.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 117.4 mm (from Z=0.0 to Z=117.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.3 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04459", "images": ["images/Shaft_04459.png", "detail_png/Shaft_04459_length.png", "detail_png/Shaft_04459_diam.png", "detail_png/Shaft_04459_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 206.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 189.4 mm (from Z=0.0 to Z=189.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03873", "images": ["images/Shaft_03873.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.3 mm and length at least 209.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 51.7 mm (from Z=0.0 to Z=51.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 49.1 mm (from Z=0.0 to Z=152.4).\n10. Finish turn diameter Ø46.0 mm over length 26.8 mm (from Z=0.0 to Z=103.3).\n11. Finish turn diameter Ø41.8 mm over length 47.6 mm (from Z=0.0 to Z=76.5).\n12. Finish turn diameter Ø38.2 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01768", "images": ["images/Shaft_01768.png", "detail_png/Shaft_01768_length.png", "detail_png/Shaft_01768_diam.png", "detail_png/Shaft_01768_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.4 mm and length at least 219.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.9 mm over length 90.6 mm (from Z=0.0 to Z=165.8).\n10. Finish turn diameter Ø30.0 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00420", "images": ["images/Shaft_00420.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.6 mm and length at least 144.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.2 mm over length 11.9 mm (from Z=0.0 to Z=84.8).\n9. Finish turn diameter Ø57.1 mm over length 41.5 mm (from Z=0.0 to Z=72.9).\n10. Finish turn diameter Ø47.0 mm over length 31.4 mm (from Z=0.0 to Z=31.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03045", "images": ["images/Shaft_03045.png", "detail_png/Shaft_03045_length.png", "detail_png/Shaft_03045_diam.png", "detail_png/Shaft_03045_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.5 mm and length at least 96.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 11.1 mm (from Z=0.0 to Z=66.5).\n9. Finish turn diameter Ø32.6 mm over length 7.0 mm (from Z=0.0 to Z=55.4).\n10. Finish turn diameter Ø30.0 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01367", "images": ["images/Shaft_01367.png", "detail_png/Shaft_01367_length.png", "detail_png/Shaft_01367_diam.png", "detail_png/Shaft_01367_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.5 mm and length at least 106.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00208", "images": ["images/Shaft_00208.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.5 mm and length at least 284.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 55.4 mm (from Z=0.0 to Z=55.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.9 mm over length 62.6 mm (from Z=0.0 to Z=224.2).\n10. Finish turn diameter Ø53.8 mm over length 69.6 mm (from Z=0.0 to Z=161.6).\n11. Finish turn diameter Ø44.0 mm over length 92.0 mm (from Z=0.0 to Z=92.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01604", "images": ["images/Shaft_01604.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.3 mm and length at least 117.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.3 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.7 mm over length 9.4 mm (from Z=0.0 to Z=91.3).\n9. Finish turn diameter Ø52.5 mm over length 24.7 mm (from Z=0.0 to Z=81.9).\n10. Finish turn diameter Ø35.3 mm over length 9.3 mm (from Z=0.0 to Z=57.2).\n11. Finish turn diameter Ø30.1 mm over length 20.8 mm (from Z=0.0 to Z=47.9).\n12. Finish turn diameter Ø30.0 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02332", "images": ["images/Shaft_02332.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.1 mm and length at least 164.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.2 mm over length 7.9 mm (from Z=0.0 to Z=121.8).\n9. Finish turn diameter Ø39.8 mm over length 10.5 mm (from Z=0.0 to Z=113.9).\n10. Finish turn diameter Ø31.3 mm over length 51.8 mm (from Z=0.0 to Z=103.4).\n11. Finish turn diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01207", "images": ["images/Shaft_01207.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.6 mm and length at least 194.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.6 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 120.8 mm (from Z=0.0 to Z=120.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00824", "images": ["images/Shaft_00824.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.0 mm and length at least 170.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 49.0 mm (from Z=0.0 to Z=136.4).\n9. Finish turn diameter Ø49.2 mm over length 18.8 mm (from Z=0.0 to Z=87.4).\n10. Finish turn diameter Ø30.0 mm over length 68.6 mm (from Z=0.0 to Z=68.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00993", "images": ["images/Shaft_00993.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.3 mm and length at least 264.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.5 mm over length 57.8 mm (from Z=0.0 to Z=243.3).\n10. Finish turn diameter Ø66.2 mm over length 32.0 mm (from Z=0.0 to Z=185.5).\n11. Finish turn diameter Ø56.9 mm over length 72.3 mm (from Z=0.0 to Z=153.5).\n12. Finish turn diameter Ø46.9 mm over length 81.2 mm (from Z=0.0 to Z=81.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03817", "images": ["images/Shaft_03817.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.7 mm and length at least 82.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.9 mm over length 21.6 mm (from Z=0.0 to Z=65.8).\n9. Finish turn diameter Ø30.0 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01841", "images": ["images/Shaft_01841.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.4 mm and length at least 205.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.4 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.7 mm over length 43.8 mm (from Z=0.0 to Z=155.7).\n10. Finish turn diameter Ø44.9 mm over length 47.9 mm (from Z=0.0 to Z=111.9).\n11. Finish turn diameter Ø30.0 mm over length 64.0 mm (from Z=0.0 to Z=64.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03302", "images": ["images/Shaft_03302.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.3 mm and length at least 190.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.1 mm over length 56.7 mm (from Z=0.0 to Z=143.7).\n9. Finish turn diameter Ø30.0 mm over length 87.0 mm (from Z=0.0 to Z=87.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01931", "images": ["images/Shaft_01931.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 237.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 163.0 mm (from Z=0.0 to Z=163.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.7 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03700", "images": ["images/Shaft_03700.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.3 mm and length at least 125.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 33.9 mm (from Z=0.0 to Z=103.5).\n9. Finish turn diameter Ø46.1 mm over length 13.2 mm (from Z=0.0 to Z=69.6).\n10. Finish turn diameter Ø30.0 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04050", "images": ["images/Shaft_04050.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.4 mm and length at least 197.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.4 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.1 mm over length 16.9 mm (from Z=0.0 to Z=154.2).\n10. Finish turn diameter Ø45.9 mm over length 27.3 mm (from Z=0.0 to Z=137.3).\n11. Finish turn diameter Ø30.0 mm over length 110.0 mm (from Z=0.0 to Z=110.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00624", "images": ["images/Shaft_00624.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.3 mm and length at least 112.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.7 mm over length 36.9 mm (from Z=0.0 to Z=96.5).\n9. Finish turn diameter Ø55.1 mm over length 5.5 mm (from Z=0.0 to Z=59.6).\n10. Finish turn diameter Ø48.8 mm over length 18.8 mm (from Z=0.0 to Z=54.1).\n11. Finish turn diameter Ø40.2 mm over length 6.0 mm (from Z=0.0 to Z=35.3).\n12. Finish turn diameter Ø30.0 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04182", "images": ["images/Shaft_04182.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.3 mm and length at least 267.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 152.5 mm (from Z=0.0 to Z=210.6).\n10. Finish turn diameter Ø30.0 mm over length 58.1 mm (from Z=0.0 to Z=58.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03841", "images": ["images/Shaft_03841.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 304.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 223.1 mm (from Z=0.0 to Z=223.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.7 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00089", "images": ["images/Shaft_00089.png", "detail_png/Shaft_00089_length.png", "detail_png/Shaft_00089_diam.png", "detail_png/Shaft_00089_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.3 mm and length at least 112.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.9 mm (from Z=0.0 to Z=75.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03154", "images": ["images/Shaft_03154.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.5 mm and length at least 187.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 62.4 mm (from Z=0.0 to Z=62.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 90.5 mm (from Z=0.0 to Z=120.2).\n9. Finish turn diameter Ø36.7 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03963", "images": ["images/Shaft_03963.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.3 mm and length at least 182.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.9 mm over length 26.5 mm (from Z=0.0 to Z=128.2).\n9. Finish turn diameter Ø44.0 mm over length 35.2 mm (from Z=0.0 to Z=101.7).\n10. Finish turn diameter Ø32.9 mm over length 22.8 mm (from Z=0.0 to Z=66.5).\n11. Finish turn diameter Ø30.0 mm over length 43.7 mm (from Z=0.0 to Z=43.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02799", "images": ["images/Shaft_02799.png", "detail_png/Shaft_02799_length.png", "detail_png/Shaft_02799_diam.png", "detail_png/Shaft_02799_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.4 mm and length at least 236.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 102.1 mm (from Z=0.0 to Z=102.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 129.6 mm (from Z=0.0 to Z=129.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03128", "images": ["images/Shaft_03128.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.4 mm and length at least 147.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 35.4 mm (from Z=0.0 to Z=128.5).\n10. Finish turn diameter Ø30.0 mm over length 93.1 mm (from Z=0.0 to Z=93.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03620", "images": ["images/Shaft_03620.png", "detail_png/Shaft_03620_length.png", "detail_png/Shaft_03620_diam.png", "detail_png/Shaft_03620_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.6 mm and length at least 318.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.0 mm over length 67.6 mm (from Z=0.0 to Z=300.5).\n10. Finish turn diameter Ø37.9 mm over length 92.8 mm (from Z=0.0 to Z=232.9).\n11. Finish turn diameter Ø30.7 mm over length 56.4 mm (from Z=0.0 to Z=140.1).\n12. Finish turn diameter Ø30.0 mm over length 83.7 mm (from Z=0.0 to Z=83.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03857", "images": ["images/Shaft_03857.png", "detail_png/Shaft_03857_length.png", "detail_png/Shaft_03857_diam.png", "detail_png/Shaft_03857_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.7 mm and length at least 310.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.4 mm over length 113.2 mm (from Z=0.0 to Z=242.2).\n10. Finish turn diameter Ø33.5 mm over length 61.2 mm (from Z=0.0 to Z=129.0).\n11. Finish turn diameter Ø30.0 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02598", "images": ["images/Shaft_02598.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.5 mm and length at least 197.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.5 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 134.4 mm (from Z=0.0 to Z=134.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02206", "images": ["images/Shaft_02206.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 249.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.7 mm over length 171.8 mm (from Z=0.0 to Z=171.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02564", "images": ["images/Shaft_02564.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.5 mm and length at least 85.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.7 mm over length 19.7 mm (from Z=0.0 to Z=61.6).\n9. Finish turn diameter Ø37.1 mm over length 19.3 mm (from Z=0.0 to Z=41.9).\n10. Finish turn diameter Ø30.0 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03664", "images": ["images/Shaft_03664.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.7 mm and length at least 78.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.1 mm over length 9.2 mm (from Z=0.0 to Z=62.7).\n9. Finish turn diameter Ø49.5 mm over length 5.0 mm (from Z=0.0 to Z=53.5).\n10. Finish turn diameter Ø45.1 mm over length 17.0 mm (from Z=0.0 to Z=48.5).\n11. Finish turn diameter Ø35.6 mm over length 13.9 mm (from Z=0.0 to Z=31.5).\n12. Finish turn diameter Ø30.0 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03881", "images": ["images/Shaft_03881.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.8 mm and length at least 66.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.5 mm over length 12.6 mm (from Z=0.0 to Z=50.0).\n9. Finish turn diameter Ø48.1 mm over length 12.9 mm (from Z=0.0 to Z=37.4).\n10. Finish turn diameter Ø40.7 mm over length 10.3 mm (from Z=0.0 to Z=24.5).\n11. Finish turn diameter Ø30.0 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00594", "images": ["images/Shaft_00594.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.0 mm and length at least 299.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 187.7 mm (from Z=0.0 to Z=187.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.5 mm over length 35.4 mm (from Z=0.0 to Z=106.4).\n10. Finish turn diameter Ø52.4 mm over length 71.0 mm (from Z=0.0 to Z=71.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04183", "images": ["images/Shaft_04183.png", "detail_png/Shaft_04183_length.png", "detail_png/Shaft_04183_diam.png", "detail_png/Shaft_04183_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.5 mm and length at least 132.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 39.7 mm (from Z=0.0 to Z=39.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.0 mm over length 43.0 mm (from Z=0.0 to Z=88.2).\n9. Finish turn diameter Ø60.5 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00857", "images": ["images/Shaft_00857.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.1 mm and length at least 169.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.1 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 14.3 mm (from Z=0.0 to Z=103.7).\n9. Finish turn diameter Ø39.1 mm over length 43.2 mm (from Z=0.0 to Z=89.4).\n10. Finish turn diameter Ø32.7 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03424", "images": ["images/Shaft_03424.png", "detail_png/Shaft_03424_length.png", "detail_png/Shaft_03424_diam.png", "detail_png/Shaft_03424_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.0 mm and length at least 239.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.4 mm over length 16.4 mm (from Z=0.0 to Z=201.6).\n10. Finish turn diameter Ø38.1 mm over length 44.4 mm (from Z=0.0 to Z=185.2).\n11. Finish turn diameter Ø30.0 mm over length 140.8 mm (from Z=0.0 to Z=140.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00770", "images": ["images/Shaft_00770.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.0 mm and length at least 291.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.2 mm over length 78.4 mm (from Z=0.0 to Z=241.3).\n10. Finish turn diameter Ø49.5 mm over length 131.3 mm (from Z=0.0 to Z=162.9).\n11. Finish turn diameter Ø30.8 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00065", "images": ["images/Shaft_00065.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 176.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 157.7 mm (from Z=0.0 to Z=157.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.0 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03121", "images": ["images/Shaft_03121.png", "detail_png/Shaft_03121_length.png", "detail_png/Shaft_03121_diam.png", "detail_png/Shaft_03121_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 203.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.2 mm (from Z=0.0 to Z=178.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.5 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00781", "images": ["images/Shaft_00781.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.3 mm and length at least 76.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.4 mm over length 5.2 mm (from Z=0.0 to Z=64.0).\n9. Finish turn diameter Ø30.0 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00056", "images": ["images/Shaft_00056.png", "detail_png/Shaft_00056_length.png", "detail_png/Shaft_00056_diam.png", "detail_png/Shaft_00056_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.7 mm and length at least 150.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.1 mm over length 32.8 mm (from Z=0.0 to Z=121.5).\n9. Finish turn diameter Ø62.8 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00553", "images": ["images/Shaft_00553.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.8 mm and length at least 83.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.0 mm over length 16.7 mm (from Z=0.0 to Z=65.8).\n9. Finish turn diameter Ø47.3 mm over length 18.9 mm (from Z=0.0 to Z=49.1).\n10. Finish turn diameter Ø33.5 mm over length 20.2 mm (from Z=0.0 to Z=30.2).\n11. Finish turn diameter Ø30.0 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00512", "images": ["images/Shaft_00512.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 220.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 160.9 mm (from Z=0.0 to Z=160.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.9 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03879", "images": ["images/Shaft_03879.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.8 mm and length at least 229.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 17.4 mm (from Z=0.0 to Z=180.8).\n10. Finish turn diameter Ø49.2 mm over length 62.0 mm (from Z=0.0 to Z=163.4).\n11. Finish turn diameter Ø36.1 mm over length 101.4 mm (from Z=0.0 to Z=101.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02866", "images": ["images/Shaft_02866.png", "detail_png/Shaft_02866_length.png", "detail_png/Shaft_02866_diam.png", "detail_png/Shaft_02866_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 214.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 170.8 mm (from Z=0.0 to Z=170.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04121", "images": ["images/Shaft_04121.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.4 mm and length at least 112.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.4 mm over length 29.6 mm (from Z=0.0 to Z=85.7).\n9. Finish turn diameter Ø36.0 mm over length 33.9 mm (from Z=0.0 to Z=56.1).\n10. Finish turn diameter Ø30.0 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01477", "images": ["images/Shaft_01477.png", "detail_png/Shaft_01477_length.png", "detail_png/Shaft_01477_diam.png", "detail_png/Shaft_01477_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.3 mm and length at least 105.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03344", "images": ["images/Shaft_03344.png", "detail_png/Shaft_03344_length.png", "detail_png/Shaft_03344_diam.png", "detail_png/Shaft_03344_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.7 mm and length at least 281.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.7 mm over length 49.0 mm (from Z=0.0 to Z=247.2).\n10. Finish turn diameter Ø30.0 mm over length 198.2 mm (from Z=0.0 to Z=198.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04025", "images": ["images/Shaft_04025.png", "detail_png/Shaft_04025_length.png", "detail_png/Shaft_04025_diam.png", "detail_png/Shaft_04025_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.9 mm and length at least 251.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 15.2 mm (from Z=0.0 to Z=172.6).\n10. Finish turn diameter Ø51.9 mm over length 61.4 mm (from Z=0.0 to Z=157.4).\n11. Finish turn diameter Ø44.5 mm over length 73.7 mm (from Z=0.0 to Z=96.0).\n12. Finish turn diameter Ø36.2 mm over length 22.3 mm (from Z=0.0 to Z=22.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04775", "images": ["images/Shaft_04775.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.5 mm and length at least 214.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 40.2 mm (from Z=0.0 to Z=145.2).\n10. Finish turn diameter Ø51.9 mm over length 46.2 mm (from Z=0.0 to Z=105.0).\n11. Finish turn diameter Ø36.3 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01993", "images": ["images/Shaft_01993.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.1 mm and length at least 180.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.9 mm (from Z=0.0 to Z=164.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02465", "images": ["images/Shaft_02465.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.5 mm and length at least 266.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 63.8 mm (from Z=0.0 to Z=63.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.6 mm over length 35.2 mm (from Z=0.0 to Z=197.2).\n10. Finish turn diameter Ø44.3 mm over length 80.2 mm (from Z=0.0 to Z=162.0).\n11. Finish turn diameter Ø32.2 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01659", "images": ["images/Shaft_01659.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.2 mm and length at least 85.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 8.7 mm (from Z=0.0 to Z=8.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.3 mm over length 18.3 mm (from Z=0.0 to Z=71.9).\n9. Finish turn diameter Ø51.3 mm over length 5.0 mm (from Z=0.0 to Z=53.6).\n10. Finish turn diameter Ø38.5 mm over length 17.9 mm (from Z=0.0 to Z=48.6).\n11. Finish turn diameter Ø30.0 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04255", "images": ["images/Shaft_04255.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.9 mm and length at least 285.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 19.4 mm (from Z=0.0 to Z=214.1).\n10. Finish turn diameter Ø50.0 mm over length 194.7 mm (from Z=0.0 to Z=194.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04134", "images": ["images/Shaft_04134.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 76.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03567", "images": ["images/Shaft_03567.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.8 mm and length at least 293.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 257.9 mm (from Z=0.0 to Z=257.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00054", "images": ["images/Shaft_00054.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.0 mm and length at least 134.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.3 mm over length 51.1 mm (from Z=0.0 to Z=108.2).\n9. Finish turn diameter Ø30.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03863", "images": ["images/Shaft_03863.png", "detail_png/Shaft_03863_length.png", "detail_png/Shaft_03863_diam.png", "detail_png/Shaft_03863_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.2 mm and length at least 322.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 133.6 mm (from Z=0.0 to Z=292.0).\n10. Finish turn diameter Ø39.4 mm over length 158.4 mm (from Z=0.0 to Z=158.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03484", "images": ["images/Shaft_03484.png", "detail_png/Shaft_03484_length.png", "detail_png/Shaft_03484_diam.png", "detail_png/Shaft_03484_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.3 mm and length at least 251.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.3 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.1 mm over length 56.5 mm (from Z=0.0 to Z=205.3).\n10. Finish turn diameter Ø52.8 mm over length 43.7 mm (from Z=0.0 to Z=148.8).\n11. Finish turn diameter Ø33.5 mm over length 25.0 mm (from Z=0.0 to Z=105.1).\n12. Finish turn diameter Ø30.0 mm over length 80.1 mm (from Z=0.0 to Z=80.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02754", "images": ["images/Shaft_02754.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.0 mm and length at least 319.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.2 mm over length 12.7 mm (from Z=0.0 to Z=268.0).\n10. Finish turn diameter Ø54.1 mm over length 64.8 mm (from Z=0.0 to Z=255.3).\n11. Finish turn diameter Ø48.5 mm over length 18.2 mm (from Z=0.0 to Z=190.5).\n12. Finish turn diameter Ø37.3 mm over length 60.2 mm (from Z=0.0 to Z=172.3).\n13. Finish turn diameter Ø30.0 mm over length 112.1 mm (from Z=0.0 to Z=112.1).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00073", "images": ["images/Shaft_00073.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.9 mm and length at least 264.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 109.7 mm (from Z=0.0 to Z=194.2).\n10. Finish turn diameter Ø39.6 mm over length 84.5 mm (from Z=0.0 to Z=84.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03711", "images": ["images/Shaft_03711.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.9 mm and length at least 98.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 14.3 mm (from Z=0.0 to Z=70.0).\n9. Finish turn diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03197", "images": ["images/Shaft_03197.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.5 mm and length at least 301.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.5 mm over length 106.9 mm (from Z=0.0 to Z=106.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.9 mm over length 57.4 mm (from Z=0.0 to Z=189.9).\n10. Finish turn diameter Ø33.5 mm over length 16.1 mm (from Z=0.0 to Z=132.5).\n11. Finish turn diameter Ø30.0 mm over length 116.4 mm (from Z=0.0 to Z=116.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04701", "images": ["images/Shaft_04701.png", "detail_png/Shaft_04701_length.png", "detail_png/Shaft_04701_diam.png", "detail_png/Shaft_04701_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.0 mm and length at least 127.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.0 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.5 mm over length 68.2 mm (from Z=0.0 to Z=87.8).\n9. Finish turn diameter Ø62.3 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04999", "images": ["images/Shaft_04999.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.9 mm and length at least 320.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 148.4 mm (from Z=0.0 to Z=148.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.1 mm over length 37.0 mm (from Z=0.0 to Z=167.4).\n10. Finish turn diameter Ø31.1 mm over length 130.4 mm (from Z=0.0 to Z=130.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04768", "images": ["images/Shaft_04768.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.7 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.7 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.1 mm over length 44.3 mm (from Z=0.0 to Z=91.7).\n9. Finish turn diameter Ø30.0 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00320", "images": ["images/Shaft_00320.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.7 mm and length at least 130.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.7 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.3 mm over length 49.0 mm (from Z=0.0 to Z=105.3).\n9. Finish turn diameter Ø56.9 mm over length 7.9 mm (from Z=0.0 to Z=56.3).\n10. Finish turn diameter Ø51.9 mm over length 28.7 mm (from Z=0.0 to Z=48.4).\n11. Finish turn diameter Ø33.4 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03852", "images": ["images/Shaft_03852.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.1 mm and length at least 100.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.4 mm over length 46.7 mm (from Z=0.0 to Z=61.3).\n9. Finish turn diameter Ø49.5 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00864", "images": ["images/Shaft_00864.png", "detail_png/Shaft_00864_length.png", "detail_png/Shaft_00864_diam.png", "detail_png/Shaft_00864_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.2 mm and length at least 132.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.2 mm over length 24.7 mm (from Z=0.0 to Z=86.3).\n9. Finish turn diameter Ø41.1 mm over length 12.5 mm (from Z=0.0 to Z=61.6).\n10. Finish turn diameter Ø30.0 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00766", "images": ["images/Shaft_00766.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.6 mm and length at least 194.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.0 mm over length 63.3 mm (from Z=0.0 to Z=136.9).\n9. Finish turn diameter Ø31.2 mm over length 33.6 mm (from Z=0.0 to Z=73.6).\n10. Finish turn diameter Ø30.0 mm over length 40.0 mm (from Z=0.0 to Z=40.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04359", "images": ["images/Shaft_04359.png", "detail_png/Shaft_04359_length.png", "detail_png/Shaft_04359_diam.png", "detail_png/Shaft_04359_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.8 mm and length at least 158.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.9 mm over length 23.7 mm (from Z=0.0 to Z=115.9).\n9. Finish turn diameter Ø31.2 mm over length 26.2 mm (from Z=0.0 to Z=92.2).\n10. Finish turn diameter Ø30.0 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04977", "images": ["images/Shaft_04977.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 178.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 91.5 mm (from Z=0.0 to Z=91.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 81.9 mm (from Z=0.0 to Z=81.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02555", "images": ["images/Shaft_02555.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.6 mm and length at least 279.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.0 mm over length 57.2 mm (from Z=0.0 to Z=216.4).\n10. Finish turn diameter Ø30.0 mm over length 159.2 mm (from Z=0.0 to Z=159.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01842", "images": ["images/Shaft_01842.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.4 mm and length at least 320.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 13.6 mm (from Z=0.0 to Z=269.7).\n10. Finish turn diameter Ø42.8 mm over length 99.5 mm (from Z=0.0 to Z=256.1).\n11. Finish turn diameter Ø30.0 mm over length 156.6 mm (from Z=0.0 to Z=156.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01863", "images": ["images/Shaft_01863.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.3 mm and length at least 267.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 184.3 mm (from Z=0.0 to Z=184.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03859", "images": ["images/Shaft_03859.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.1 mm and length at least 269.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.4 mm over length 51.9 mm (from Z=0.0 to Z=249.0).\n10. Finish turn diameter Ø59.9 mm over length 33.0 mm (from Z=0.0 to Z=197.1).\n11. Finish turn diameter Ø54.7 mm over length 46.5 mm (from Z=0.0 to Z=164.1).\n12. Finish turn diameter Ø36.9 mm over length 45.1 mm (from Z=0.0 to Z=117.6).\n13. Finish turn diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02993", "images": ["images/Shaft_02993.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.5 mm and length at least 123.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.7 mm over length 33.4 mm (from Z=0.0 to Z=81.7).\n9. Finish turn diameter Ø43.2 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04446", "images": ["images/Shaft_04446.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 224.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 131.1 mm (from Z=0.0 to Z=131.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.3 mm over length 88.5 mm (from Z=0.0 to Z=88.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04290", "images": ["images/Shaft_04290.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.3 mm and length at least 310.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.0 mm over length 74.6 mm (from Z=0.0 to Z=292.8).\n10. Finish turn diameter Ø53.8 mm over length 106.8 mm (from Z=0.0 to Z=218.2).\n11. Finish turn diameter Ø44.8 mm over length 85.0 mm (from Z=0.0 to Z=111.4).\n12. Finish turn diameter Ø32.5 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00341", "images": ["images/Shaft_00341.png", "detail_png/Shaft_00341_length.png", "detail_png/Shaft_00341_diam.png", "detail_png/Shaft_00341_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 104.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.2 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00185", "images": ["images/Shaft_00185.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.3 mm and length at least 321.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.3 mm over length 105.3 mm (from Z=0.0 to Z=105.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.3 mm over length 90.7 mm (from Z=0.0 to Z=211.6).\n10. Finish turn diameter Ø30.0 mm over length 120.9 mm (from Z=0.0 to Z=120.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04910", "images": ["images/Shaft_04910.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.6 mm and length at least 195.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.6 mm (from Z=0.0 to Z=125.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04436", "images": ["images/Shaft_04436.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.9 mm and length at least 121.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.7 mm over length 33.2 mm (from Z=0.0 to Z=91.5).\n9. Finish turn diameter Ø30.0 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00735", "images": ["images/Shaft_00735.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.4 mm and length at least 76.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.9 mm over length 18.4 mm (from Z=0.0 to Z=59.8).\n9. Finish turn diameter Ø30.4 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01895", "images": ["images/Shaft_01895.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.0 mm and length at least 120.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 25.9 mm (from Z=0.0 to Z=72.9).\n9. Finish turn diameter Ø38.6 mm over length 12.0 mm (from Z=0.0 to Z=47.0).\n10. Finish turn diameter Ø30.0 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03675", "images": ["images/Shaft_03675.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 157.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 76.8 mm (from Z=0.0 to Z=76.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.2 mm over length 75.9 mm (from Z=0.0 to Z=75.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04709", "images": ["images/Shaft_04709.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.9 mm and length at least 257.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 114.9 mm (from Z=0.0 to Z=114.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.6 mm over length 115.8 mm (from Z=0.0 to Z=137.1).\n10. Finish turn diameter Ø44.3 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02062", "images": ["images/Shaft_02062.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.6 mm and length at least 88.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 25.6 mm (from Z=0.0 to Z=71.5).\n9. Finish turn diameter Ø40.0 mm over length 16.3 mm (from Z=0.0 to Z=45.9).\n10. Finish turn diameter Ø36.3 mm over length 8.1 mm (from Z=0.0 to Z=29.6).\n11. Finish turn diameter Ø30.0 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04142", "images": ["images/Shaft_04142.png", "detail_png/Shaft_04142_length.png", "detail_png/Shaft_04142_diam.png", "detail_png/Shaft_04142_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.1 mm and length at least 294.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 61.5 mm (from Z=0.0 to Z=203.1).\n10. Finish turn diameter Ø30.0 mm over length 141.6 mm (from Z=0.0 to Z=141.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02787", "images": ["images/Shaft_02787.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 234.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.7 mm (from Z=0.0 to Z=202.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.5 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04776", "images": ["images/Shaft_04776.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.4 mm and length at least 86.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 48.4 mm (from Z=0.0 to Z=66.8).\n9. Finish turn diameter Ø50.3 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01455", "images": ["images/Shaft_01455.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.5 mm and length at least 288.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.2 mm over length 87.9 mm (from Z=0.0 to Z=239.5).\n10. Finish turn diameter Ø58.0 mm over length 33.7 mm (from Z=0.0 to Z=151.6).\n11. Finish turn diameter Ø52.5 mm over length 117.9 mm (from Z=0.0 to Z=117.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01037", "images": ["images/Shaft_01037.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.5 mm and length at least 82.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02664", "images": ["images/Shaft_02664.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.1 mm and length at least 312.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 149.7 mm (from Z=0.0 to Z=149.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.4 mm over length 60.4 mm (from Z=0.0 to Z=158.2).\n10. Finish turn diameter Ø32.5 mm over length 22.2 mm (from Z=0.0 to Z=97.8).\n11. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01903", "images": ["images/Shaft_01903.png", "detail_png/Shaft_01903_length.png", "detail_png/Shaft_01903_diam.png", "detail_png/Shaft_01903_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.9 mm and length at least 113.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.9 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.6 mm over length 17.6 mm (from Z=0.0 to Z=99.1).\n9. Finish turn diameter Ø45.8 mm over length 81.5 mm (from Z=0.0 to Z=81.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03730", "images": ["images/Shaft_03730.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.4 mm and length at least 168.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.2 mm over length 60.3 mm (from Z=0.0 to Z=128.6).\n9. Finish turn diameter Ø33.7 mm over length 31.4 mm (from Z=0.0 to Z=68.3).\n10. Finish turn diameter Ø30.0 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03025", "images": ["images/Shaft_03025.png", "detail_png/Shaft_03025_length.png", "detail_png/Shaft_03025_diam.png", "detail_png/Shaft_03025_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.2 mm and length at least 140.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 25.0 mm (from Z=0.0 to Z=25.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.0 mm over length 19.3 mm (from Z=0.0 to Z=110.0).\n9. Finish turn diameter Ø45.2 mm over length 58.9 mm (from Z=0.0 to Z=90.7).\n10. Finish turn diameter Ø35.5 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04898", "images": ["images/Shaft_04898.png", "detail_png/Shaft_04898_length.png", "detail_png/Shaft_04898_diam.png", "detail_png/Shaft_04898_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 83.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 57.1 mm (from Z=0.0 to Z=57.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.7 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04526", "images": ["images/Shaft_04526.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.2 mm and length at least 320.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.8 mm over length 46.3 mm (from Z=0.0 to Z=294.4).\n10. Finish turn diameter Ø33.4 mm over length 49.4 mm (from Z=0.0 to Z=248.1).\n11. Finish turn diameter Ø30.0 mm over length 198.7 mm (from Z=0.0 to Z=198.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04820", "images": ["images/Shaft_04820.png", "detail_png/Shaft_04820_length.png", "detail_png/Shaft_04820_diam.png", "detail_png/Shaft_04820_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.4 mm and length at least 231.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 22.5 mm (from Z=0.0 to Z=183.4).\n10. Finish turn diameter Ø33.8 mm over length 37.6 mm (from Z=0.0 to Z=160.9).\n11. Finish turn diameter Ø30.0 mm over length 123.3 mm (from Z=0.0 to Z=123.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02689", "images": ["images/Shaft_02689.png", "detail_png/Shaft_02689_length.png", "detail_png/Shaft_02689_diam.png", "detail_png/Shaft_02689_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.4 mm and length at least 189.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.4 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.1 mm over length 28.8 mm (from Z=0.0 to Z=151.3).\n10. Finish turn diameter Ø30.0 mm over length 122.5 mm (from Z=0.0 to Z=122.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03335", "images": ["images/Shaft_03335.png", "detail_png/Shaft_03335_length.png", "detail_png/Shaft_03335_diam.png", "detail_png/Shaft_03335_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.7 mm and length at least 193.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.7 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 161.6 mm (from Z=0.0 to Z=161.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03412", "images": ["images/Shaft_03412.png", "detail_png/Shaft_03412_length.png", "detail_png/Shaft_03412_diam.png", "detail_png/Shaft_03412_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 261.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 183.1 mm (from Z=0.0 to Z=183.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.8 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03940", "images": ["images/Shaft_03940.png", "detail_png/Shaft_03940_length.png", "detail_png/Shaft_03940_diam.png", "detail_png/Shaft_03940_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.8 mm and length at least 120.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 32.9 mm (from Z=0.0 to Z=92.3).\n9. Finish turn diameter Ø52.6 mm over length 14.6 mm (from Z=0.0 to Z=59.4).\n10. Finish turn diameter Ø36.8 mm over length 15.3 mm (from Z=0.0 to Z=44.8).\n11. Finish turn diameter Ø30.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00195", "images": ["images/Shaft_00195.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.6 mm and length at least 226.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.5 mm over length 20.1 mm (from Z=0.0 to Z=178.6).\n10. Finish turn diameter Ø36.1 mm over length 46.5 mm (from Z=0.0 to Z=158.5).\n11. Finish turn diameter Ø32.7 mm over length 45.8 mm (from Z=0.0 to Z=112.0).\n12. Finish turn diameter Ø30.0 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02328", "images": ["images/Shaft_02328.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.6 mm and length at least 112.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03964", "images": ["images/Shaft_03964.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.6 mm and length at least 67.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 6.1 mm (from Z=0.0 to Z=37.7).\n9. Finish turn diameter Ø39.8 mm over length 10.0 mm (from Z=0.0 to Z=31.6).\n10. Finish turn diameter Ø31.8 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03891", "images": ["images/Shaft_03891.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.7 mm and length at least 135.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.7 mm over length 8.7 mm (from Z=0.0 to Z=8.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 121.3 mm (from Z=0.0 to Z=121.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03657", "images": ["images/Shaft_03657.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.1 mm and length at least 277.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.1 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 241.7 mm (from Z=0.0 to Z=241.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01018", "images": ["images/Shaft_01018.png", "detail_png/Shaft_01018_length.png", "detail_png/Shaft_01018_diam.png", "detail_png/Shaft_01018_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.1 mm and length at least 76.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.5 mm over length 28.1 mm (from Z=0.0 to Z=40.2).\n9. Finish turn diameter Ø48.5 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02672", "images": ["images/Shaft_02672.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.1 mm and length at least 278.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 205.5 mm (from Z=0.0 to Z=205.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02841", "images": ["images/Shaft_02841.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.9 mm and length at least 264.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 198.8 mm (from Z=0.0 to Z=198.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04743", "images": ["images/Shaft_04743.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.3 mm and length at least 310.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 63.1 mm (from Z=0.0 to Z=270.0).\n10. Finish turn diameter Ø35.8 mm over length 45.0 mm (from Z=0.0 to Z=206.9).\n11. Finish turn diameter Ø30.2 mm over length 68.4 mm (from Z=0.0 to Z=161.9).\n12. Finish turn diameter Ø30.0 mm over length 93.5 mm (from Z=0.0 to Z=93.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01230", "images": ["images/Shaft_01230.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.5 mm and length at least 304.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 84.7 mm (from Z=0.0 to Z=84.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.2 mm over length 54.7 mm (from Z=0.0 to Z=214.5).\n10. Finish turn diameter Ø45.0 mm over length 42.0 mm (from Z=0.0 to Z=159.8).\n11. Finish turn diameter Ø30.0 mm over length 117.8 mm (from Z=0.0 to Z=117.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01956", "images": ["images/Shaft_01956.png", "detail_png/Shaft_01956_length.png", "detail_png/Shaft_01956_diam.png", "detail_png/Shaft_01956_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.6 mm and length at least 89.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.7 mm over length 21.9 mm (from Z=0.0 to Z=67.6).\n9. Finish turn diameter Ø31.3 mm over length 17.5 mm (from Z=0.0 to Z=45.7).\n10. Finish turn diameter Ø30.0 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00324", "images": ["images/Shaft_00324.png", "detail_png/Shaft_00324_length.png", "detail_png/Shaft_00324_diam.png", "detail_png/Shaft_00324_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.8 mm and length at least 158.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.3 mm over length 35.6 mm (from Z=0.0 to Z=119.2).\n9. Finish turn diameter Ø41.1 mm over length 48.4 mm (from Z=0.0 to Z=83.6).\n10. Finish turn diameter Ø30.0 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01791", "images": ["images/Shaft_01791.png", "detail_png/Shaft_01791_length.png", "detail_png/Shaft_01791_diam.png", "detail_png/Shaft_01791_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.6 mm and length at least 115.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.1 mm over length 34.4 mm (from Z=0.0 to Z=94.3).\n9. Finish turn diameter Ø37.6 mm over length 27.5 mm (from Z=0.0 to Z=59.9).\n10. Finish turn diameter Ø30.6 mm over length 11.6 mm (from Z=0.0 to Z=32.4).\n11. Finish turn diameter Ø30.0 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02852", "images": ["images/Shaft_02852.png", "detail_png/Shaft_02852_length.png", "detail_png/Shaft_02852_diam.png", "detail_png/Shaft_02852_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø82.0 mm and length at least 284.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø80.0 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø80.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø75.6 mm over length 26.6 mm (from Z=0.0 to Z=202.9).\n10. Finish turn diameter Ø70.4 mm over length 71.7 mm (from Z=0.0 to Z=176.3).\n11. Finish turn diameter Ø63.3 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03508", "images": ["images/Shaft_03508.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.8 mm and length at least 115.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.9 mm over length 18.5 mm (from Z=0.0 to Z=85.6).\n9. Finish turn diameter Ø30.0 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04475", "images": ["images/Shaft_04475.png", "detail_png/Shaft_04475_length.png", "detail_png/Shaft_04475_diam.png", "detail_png/Shaft_04475_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.3 mm and length at least 232.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 199.9 mm (from Z=0.0 to Z=199.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02149", "images": ["images/Shaft_02149.png", "detail_png/Shaft_02149_length.png", "detail_png/Shaft_02149_diam.png", "detail_png/Shaft_02149_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.2 mm and length at least 185.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.9 mm over length 17.6 mm (from Z=0.0 to Z=151.2).\n9. Finish turn diameter Ø43.6 mm over length 26.3 mm (from Z=0.0 to Z=133.6).\n10. Finish turn diameter Ø39.0 mm over length 46.8 mm (from Z=0.0 to Z=107.3).\n11. Finish turn diameter Ø30.0 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02899", "images": ["images/Shaft_02899.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.8 mm and length at least 302.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.1 mm over length 85.9 mm (from Z=0.0 to Z=236.0).\n10. Finish turn diameter Ø30.0 mm over length 150.1 mm (from Z=0.0 to Z=150.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02578", "images": ["images/Shaft_02578.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 68.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 54.2 mm (from Z=0.0 to Z=54.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.4 mm over length 9.3 mm (from Z=0.0 to Z=9.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02159", "images": ["images/Shaft_02159.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.2 mm and length at least 194.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.1 mm over length 10.8 mm (from Z=0.0 to Z=99.3).\n9. Finish turn diameter Ø58.7 mm over length 76.7 mm (from Z=0.0 to Z=88.5).\n10. Finish turn diameter Ø43.4 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02028", "images": ["images/Shaft_02028.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.2 mm and length at least 98.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 64.4 mm (from Z=0.0 to Z=64.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00635", "images": ["images/Shaft_00635.png", "detail_png/Shaft_00635_length.png", "detail_png/Shaft_00635_diam.png", "detail_png/Shaft_00635_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.8 mm and length at least 172.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.6 mm over length 43.0 mm (from Z=0.0 to Z=122.7).\n9. Finish turn diameter Ø42.4 mm over length 58.0 mm (from Z=0.0 to Z=79.7).\n10. Finish turn diameter Ø30.8 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02652", "images": ["images/Shaft_02652.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.1 mm and length at least 153.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.1 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 118.9 mm (from Z=0.0 to Z=118.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00918", "images": ["images/Shaft_00918.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.7 mm and length at least 109.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.9 mm over length 16.7 mm (from Z=0.0 to Z=92.4).\n9. Finish turn diameter Ø30.0 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04143", "images": ["images/Shaft_04143.png", "detail_png/Shaft_04143_length.png", "detail_png/Shaft_04143_diam.png", "detail_png/Shaft_04143_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.8 mm and length at least 65.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 8.2 mm (from Z=0.0 to Z=8.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.7 mm over length 5.2 mm (from Z=0.0 to Z=52.7).\n9. Finish turn diameter Ø37.7 mm over length 9.5 mm (from Z=0.0 to Z=47.5).\n10. Finish turn diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04780", "images": ["images/Shaft_04780.png", "detail_png/Shaft_04780_length.png", "detail_png/Shaft_04780_diam.png", "detail_png/Shaft_04780_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 101.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.3 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02102", "images": ["images/Shaft_02102.png", "detail_png/Shaft_02102_length.png", "detail_png/Shaft_02102_diam.png", "detail_png/Shaft_02102_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.1 mm and length at least 214.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.9 mm over length 28.8 mm (from Z=0.0 to Z=175.8).\n10. Finish turn diameter Ø35.6 mm over length 43.5 mm (from Z=0.0 to Z=147.0).\n11. Finish turn diameter Ø30.0 mm over length 103.5 mm (from Z=0.0 to Z=103.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00165", "images": ["images/Shaft_00165.png", "detail_png/Shaft_00165_length.png", "detail_png/Shaft_00165_diam.png", "detail_png/Shaft_00165_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.8 mm and length at least 261.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 97.0 mm (from Z=0.0 to Z=97.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 91.1 mm (from Z=0.0 to Z=159.3).\n10. Finish turn diameter Ø30.0 mm over length 68.2 mm (from Z=0.0 to Z=68.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00380", "images": ["images/Shaft_00380.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.6 mm and length at least 78.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.9 mm over length 20.4 mm (from Z=0.0 to Z=65.4).\n9. Finish turn diameter Ø30.0 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01744", "images": ["images/Shaft_01744.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.6 mm and length at least 213.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.6 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.8 mm over length 7.9 mm (from Z=0.0 to Z=150.6).\n10. Finish turn diameter Ø40.5 mm over length 24.9 mm (from Z=0.0 to Z=142.7).\n11. Finish turn diameter Ø32.4 mm over length 13.7 mm (from Z=0.0 to Z=117.8).\n12. Finish turn diameter Ø30.0 mm over length 104.1 mm (from Z=0.0 to Z=104.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02583", "images": ["images/Shaft_02583.png", "detail_png/Shaft_02583_length.png", "detail_png/Shaft_02583_diam.png", "detail_png/Shaft_02583_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.3 mm and length at least 267.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.3 mm (from Z=0.0 to Z=224.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01778", "images": ["images/Shaft_01778.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.3 mm and length at least 201.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.3 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 21.8 mm (from Z=0.0 to Z=139.8).\n10. Finish turn diameter Ø41.9 mm over length 85.3 mm (from Z=0.0 to Z=118.0).\n11. Finish turn diameter Ø30.0 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00763", "images": ["images/Shaft_00763.png", "detail_png/Shaft_00763_length.png", "detail_png/Shaft_00763_diam.png", "detail_png/Shaft_00763_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.0 mm and length at least 175.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.1 mm over length 34.8 mm (from Z=0.0 to Z=132.9).\n9. Finish turn diameter Ø40.3 mm over length 22.5 mm (from Z=0.0 to Z=98.1).\n10. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02514", "images": ["images/Shaft_02514.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.9 mm and length at least 96.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.4 mm over length 12.6 mm (from Z=0.0 to Z=57.2).\n9. Finish turn diameter Ø68.3 mm over length 21.7 mm (from Z=0.0 to Z=44.6).\n10. Finish turn diameter Ø56.1 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01508", "images": ["images/Shaft_01508.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.5 mm and length at least 89.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.4 mm over length 43.0 mm (from Z=0.0 to Z=56.8).\n9. Finish turn diameter Ø30.0 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04300", "images": ["images/Shaft_04300.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.1 mm and length at least 180.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 20.4 mm (from Z=0.0 to Z=130.2).\n9. Finish turn diameter Ø37.4 mm over length 65.7 mm (from Z=0.0 to Z=109.8).\n10. Finish turn diameter Ø30.0 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03041", "images": ["images/Shaft_03041.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.6 mm and length at least 267.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 160.9 mm (from Z=0.0 to Z=160.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.4 mm over length 61.0 mm (from Z=0.0 to Z=101.7).\n10. Finish turn diameter Ø51.5 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03098", "images": ["images/Shaft_03098.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.5 mm and length at least 238.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.5 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 226.4 mm (from Z=0.0 to Z=226.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02458", "images": ["images/Shaft_02458.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.1 mm and length at least 227.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 51.2 mm (from Z=0.0 to Z=51.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 14.2 mm (from Z=0.0 to Z=171.0).\n10. Finish turn diameter Ø55.8 mm over length 55.4 mm (from Z=0.0 to Z=156.8).\n11. Finish turn diameter Ø52.0 mm over length 20.8 mm (from Z=0.0 to Z=101.4).\n12. Finish turn diameter Ø32.7 mm over length 33.5 mm (from Z=0.0 to Z=80.6).\n13. Finish turn diameter Ø30.0 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02306", "images": ["images/Shaft_02306.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.6 mm and length at least 244.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.6 mm over length 156.1 mm (from Z=0.0 to Z=156.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.8 mm over length 22.2 mm (from Z=0.0 to Z=83.2).\n10. Finish turn diameter Ø39.4 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01099", "images": ["images/Shaft_01099.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.6 mm and length at least 320.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.5 mm over length 121.0 mm (from Z=0.0 to Z=294.1).\n10. Finish turn diameter Ø30.0 mm over length 173.1 mm (from Z=0.0 to Z=173.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01951", "images": ["images/Shaft_01951.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 91.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.0 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04957", "images": ["images/Shaft_04957.png", "detail_png/Shaft_04957_length.png", "detail_png/Shaft_04957_diam.png", "detail_png/Shaft_04957_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.9 mm and length at least 81.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.2 mm over length 16.4 mm (from Z=0.0 to Z=62.1).\n9. Finish turn diameter Ø30.0 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03912", "images": ["images/Shaft_03912.png", "detail_png/Shaft_03912_length.png", "detail_png/Shaft_03912_diam.png", "detail_png/Shaft_03912_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 115.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 93.1 mm (from Z=0.0 to Z=93.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04834", "images": ["images/Shaft_04834.png", "detail_png/Shaft_04834_length.png", "detail_png/Shaft_04834_diam.png", "detail_png/Shaft_04834_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.9 mm and length at least 73.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.5 mm over length 19.0 mm (from Z=0.0 to Z=58.1).\n9. Finish turn diameter Ø30.0 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04328", "images": ["images/Shaft_04328.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 286.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 261.9 mm (from Z=0.0 to Z=261.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.7 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03766", "images": ["images/Shaft_03766.png", "detail_png/Shaft_03766_length.png", "detail_png/Shaft_03766_diam.png", "detail_png/Shaft_03766_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.8 mm and length at least 279.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.8 mm over length 89.4 mm (from Z=0.0 to Z=89.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 67.7 mm (from Z=0.0 to Z=185.2).\n10. Finish turn diameter Ø49.4 mm over length 44.1 mm (from Z=0.0 to Z=117.5).\n11. Finish turn diameter Ø35.7 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02967", "images": ["images/Shaft_02967.png", "detail_png/Shaft_02967_length.png", "detail_png/Shaft_02967_diam.png", "detail_png/Shaft_02967_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.4 mm and length at least 100.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.4 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 20.2 mm (from Z=0.0 to Z=76.3).\n9. Finish turn diameter Ø44.4 mm over length 28.6 mm (from Z=0.0 to Z=56.1).\n10. Finish turn diameter Ø30.0 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00393", "images": ["images/Shaft_00393.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.8 mm and length at least 315.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 85.7 mm (from Z=0.0 to Z=85.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.3 mm over length 73.6 mm (from Z=0.0 to Z=224.7).\n10. Finish turn diameter Ø38.5 mm over length 56.1 mm (from Z=0.0 to Z=151.1).\n11. Finish turn diameter Ø30.0 mm over length 95.0 mm (from Z=0.0 to Z=95.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01470", "images": ["images/Shaft_01470.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.7 mm and length at least 144.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.4 mm over length 51.7 mm (from Z=0.0 to Z=91.6).\n9. Finish turn diameter Ø31.6 mm over length 11.8 mm (from Z=0.0 to Z=39.9).\n10. Finish turn diameter Ø30.0 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03962", "images": ["images/Shaft_03962.png", "detail_png/Shaft_03962_length.png", "detail_png/Shaft_03962_diam.png", "detail_png/Shaft_03962_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.7 mm and length at least 298.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.7 mm over length 97.0 mm (from Z=0.0 to Z=97.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 75.7 mm (from Z=0.0 to Z=196.8).\n10. Finish turn diameter Ø45.3 mm over length 121.1 mm (from Z=0.0 to Z=121.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02471", "images": ["images/Shaft_02471.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.1 mm and length at least 191.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.1 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.0 mm over length 31.7 mm (from Z=0.0 to Z=86.3).\n9. Finish turn diameter Ø30.8 mm over length 18.4 mm (from Z=0.0 to Z=54.6).\n10. Finish turn diameter Ø30.0 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01270", "images": ["images/Shaft_01270.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.6 mm and length at least 243.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 81.7 mm (from Z=0.0 to Z=81.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 37.4 mm (from Z=0.0 to Z=156.8).\n10. Finish turn diameter Ø30.0 mm over length 119.4 mm (from Z=0.0 to Z=119.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04239", "images": ["images/Shaft_04239.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.2 mm and length at least 305.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 64.0 mm (from Z=0.0 to Z=64.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.5 mm over length 82.5 mm (from Z=0.0 to Z=236.4).\n10. Finish turn diameter Ø55.4 mm over length 86.3 mm (from Z=0.0 to Z=153.9).\n11. Finish turn diameter Ø44.9 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02010", "images": ["images/Shaft_02010.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.5 mm and length at least 269.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.8 mm over length 33.3 mm (from Z=0.0 to Z=214.9).\n10. Finish turn diameter Ø44.8 mm over length 29.7 mm (from Z=0.0 to Z=181.6).\n11. Finish turn diameter Ø33.8 mm over length 43.5 mm (from Z=0.0 to Z=151.9).\n12. Finish turn diameter Ø30.0 mm over length 108.4 mm (from Z=0.0 to Z=108.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04311", "images": ["images/Shaft_04311.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.0 mm and length at least 108.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.0 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.4 mm over length 37.0 mm (from Z=0.0 to Z=92.7).\n9. Finish turn diameter Ø30.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00493", "images": ["images/Shaft_00493.png", "detail_png/Shaft_00493_length.png", "detail_png/Shaft_00493_diam.png", "detail_png/Shaft_00493_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.3 mm and length at least 110.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.3 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.2 mm over length 14.8 mm (from Z=0.0 to Z=97.1).\n9. Finish turn diameter Ø36.5 mm over length 21.7 mm (from Z=0.0 to Z=82.3).\n10. Finish turn diameter Ø30.0 mm over length 60.6 mm (from Z=0.0 to Z=60.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00631", "images": ["images/Shaft_00631.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.2 mm and length at least 121.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.2 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.4 mm over length 25.9 mm (from Z=0.0 to Z=105.3).\n9. Finish turn diameter Ø30.0 mm over length 79.4 mm (from Z=0.0 to Z=79.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02679", "images": ["images/Shaft_02679.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.1 mm and length at least 307.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 265.9 mm (from Z=0.0 to Z=265.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02958", "images": ["images/Shaft_02958.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.7 mm and length at least 197.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 35.6 mm (from Z=0.0 to Z=35.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.2 mm over length 34.8 mm (from Z=0.0 to Z=157.3).\n10. Finish turn diameter Ø31.0 mm over length 122.5 mm (from Z=0.0 to Z=122.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01167", "images": ["images/Shaft_01167.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.4 mm and length at least 202.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 26.3 mm (from Z=0.0 to Z=157.1).\n10. Finish turn diameter Ø39.4 mm over length 23.6 mm (from Z=0.0 to Z=130.8).\n11. Finish turn diameter Ø30.0 mm over length 107.2 mm (from Z=0.0 to Z=107.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04974", "images": ["images/Shaft_04974.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.4 mm and length at least 219.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.1 mm over length 43.7 mm (from Z=0.0 to Z=155.6).\n10. Finish turn diameter Ø42.0 mm over length 34.0 mm (from Z=0.0 to Z=111.9).\n11. Finish turn diameter Ø34.1 mm over length 22.3 mm (from Z=0.0 to Z=77.9).\n12. Finish turn diameter Ø30.0 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03046", "images": ["images/Shaft_03046.png", "detail_png/Shaft_03046_length.png", "detail_png/Shaft_03046_diam.png", "detail_png/Shaft_03046_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.7 mm and length at least 151.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 68.1 mm (from Z=0.0 to Z=68.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.7 mm over length 55.3 mm (from Z=0.0 to Z=78.4).\n9. Finish turn diameter Ø43.6 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03697", "images": ["images/Shaft_03697.png", "detail_png/Shaft_03697_length.png", "detail_png/Shaft_03697_diam.png", "detail_png/Shaft_03697_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.8 mm and length at least 142.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.8 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 106.8 mm (from Z=0.0 to Z=106.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00852", "images": ["images/Shaft_00852.png", "detail_png/Shaft_00852_length.png", "detail_png/Shaft_00852_diam.png", "detail_png/Shaft_00852_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.6 mm and length at least 139.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.9 mm over length 29.3 mm (from Z=0.0 to Z=115.1).\n9. Finish turn diameter Ø51.7 mm over length 5.0 mm (from Z=0.0 to Z=85.8).\n10. Finish turn diameter Ø42.7 mm over length 23.4 mm (from Z=0.0 to Z=80.8).\n11. Finish turn diameter Ø30.0 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02961", "images": ["images/Shaft_02961.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 68.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.1 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00365", "images": ["images/Shaft_00365.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.3 mm and length at least 304.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 80.2 mm (from Z=0.0 to Z=80.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 104.7 mm (from Z=0.0 to Z=219.5).\n10. Finish turn diameter Ø34.6 mm over length 114.8 mm (from Z=0.0 to Z=114.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04469", "images": ["images/Shaft_04469.png", "detail_png/Shaft_04469_length.png", "detail_png/Shaft_04469_diam.png", "detail_png/Shaft_04469_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.2 mm and length at least 203.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.8 mm over length 31.5 mm (from Z=0.0 to Z=175.6).\n10. Finish turn diameter Ø43.2 mm over length 61.5 mm (from Z=0.0 to Z=144.1).\n11. Finish turn diameter Ø35.5 mm over length 73.1 mm (from Z=0.0 to Z=82.6).\n12. Finish turn diameter Ø30.0 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00983", "images": ["images/Shaft_00983.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.6 mm and length at least 301.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.4 mm over length 28.6 mm (from Z=0.0 to Z=245.3).\n10. Finish turn diameter Ø38.7 mm over length 17.1 mm (from Z=0.0 to Z=216.7).\n11. Finish turn diameter Ø30.0 mm over length 199.6 mm (from Z=0.0 to Z=199.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00729", "images": ["images/Shaft_00729.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.1 mm and length at least 79.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 18.5 mm (from Z=0.0 to Z=18.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01045", "images": ["images/Shaft_01045.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.4 mm and length at least 76.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01633", "images": ["images/Shaft_01633.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.8 mm and length at least 298.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 224.0 mm (from Z=0.0 to Z=224.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00379", "images": ["images/Shaft_00379.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.2 mm and length at least 201.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 44.0 mm (from Z=0.0 to Z=169.8).\n10. Finish turn diameter Ø41.2 mm over length 40.1 mm (from Z=0.0 to Z=125.8).\n11. Finish turn diameter Ø30.0 mm over length 85.7 mm (from Z=0.0 to Z=85.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01562", "images": ["images/Shaft_01562.png", "detail_png/Shaft_01562_length.png", "detail_png/Shaft_01562_diam.png", "detail_png/Shaft_01562_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.6 mm and length at least 184.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.8 mm over length 77.5 mm (from Z=0.0 to Z=158.2).\n9. Finish turn diameter Ø45.2 mm over length 20.7 mm (from Z=0.0 to Z=80.7).\n10. Finish turn diameter Ø30.0 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03013", "images": ["images/Shaft_03013.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.8 mm and length at least 147.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 101.6 mm (from Z=0.0 to Z=101.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04849", "images": ["images/Shaft_04849.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.2 mm and length at least 305.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 136.2 mm (from Z=0.0 to Z=136.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.2 mm over length 23.4 mm (from Z=0.0 to Z=164.3).\n10. Finish turn diameter Ø37.9 mm over length 140.9 mm (from Z=0.0 to Z=140.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04607", "images": ["images/Shaft_04607.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.7 mm and length at least 241.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 40.2 mm (from Z=0.0 to Z=40.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.0 mm over length 50.3 mm (from Z=0.0 to Z=196.4).\n10. Finish turn diameter Ø50.6 mm over length 75.2 mm (from Z=0.0 to Z=146.1).\n11. Finish turn diameter Ø40.6 mm over length 70.9 mm (from Z=0.0 to Z=70.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00227", "images": ["images/Shaft_00227.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.6 mm and length at least 262.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.2 mm over length 191.2 mm (from Z=0.0 to Z=234.4).\n10. Finish turn diameter Ø50.8 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01323", "images": ["images/Shaft_01323.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.4 mm and length at least 211.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 49.5 mm (from Z=0.0 to Z=49.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.2 mm over length 122.2 mm (from Z=0.0 to Z=156.8).\n10. Finish turn diameter Ø45.5 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02836", "images": ["images/Shaft_02836.png", "detail_png/Shaft_02836_length.png", "detail_png/Shaft_02836_diam.png", "detail_png/Shaft_02836_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.4 mm and length at least 259.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.7 mm over length 69.2 mm (from Z=0.0 to Z=204.3).\n10. Finish turn diameter Ø46.6 mm over length 14.2 mm (from Z=0.0 to Z=135.1).\n11. Finish turn diameter Ø34.7 mm over length 29.0 mm (from Z=0.0 to Z=120.9).\n12. Finish turn diameter Ø30.0 mm over length 91.9 mm (from Z=0.0 to Z=91.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02636", "images": ["images/Shaft_02636.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.8 mm and length at least 114.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 41.0 mm (from Z=0.0 to Z=92.2).\n9. Finish turn diameter Ø35.0 mm over length 36.0 mm (from Z=0.0 to Z=51.2).\n10. Finish turn diameter Ø30.0 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03742", "images": ["images/Shaft_03742.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.7 mm and length at least 321.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.8 mm over length 23.0 mm (from Z=0.0 to Z=255.5).\n10. Finish turn diameter Ø40.1 mm over length 49.6 mm (from Z=0.0 to Z=232.5).\n11. Finish turn diameter Ø33.1 mm over length 76.0 mm (from Z=0.0 to Z=182.9).\n12. Finish turn diameter Ø30.0 mm over length 106.9 mm (from Z=0.0 to Z=106.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00865", "images": ["images/Shaft_00865.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.8 mm and length at least 205.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.8 mm over length 45.8 mm (from Z=0.0 to Z=145.4).\n10. Finish turn diameter Ø58.7 mm over length 46.9 mm (from Z=0.0 to Z=99.6).\n11. Finish turn diameter Ø53.7 mm over length 25.8 mm (from Z=0.0 to Z=52.7).\n12. Finish turn diameter Ø35.0 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00529", "images": ["images/Shaft_00529.png", "detail_png/Shaft_00529_length.png", "detail_png/Shaft_00529_diam.png", "detail_png/Shaft_00529_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.6 mm and length at least 279.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.7 mm over length 62.1 mm (from Z=0.0 to Z=250.3).\n10. Finish turn diameter Ø63.1 mm over length 31.0 mm (from Z=0.0 to Z=188.2).\n11. Finish turn diameter Ø43.3 mm over length 85.5 mm (from Z=0.0 to Z=157.2).\n12. Finish turn diameter Ø30.0 mm over length 71.7 mm (from Z=0.0 to Z=71.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02331", "images": ["images/Shaft_02331.png", "detail_png/Shaft_02331_length.png", "detail_png/Shaft_02331_diam.png", "detail_png/Shaft_02331_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.3 mm and length at least 248.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 30.1 mm (from Z=0.0 to Z=30.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 212.9 mm (from Z=0.0 to Z=212.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01330", "images": ["images/Shaft_01330.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.2 mm and length at least 250.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 207.4 mm (from Z=0.0 to Z=207.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01855", "images": ["images/Shaft_01855.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.3 mm and length at least 138.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.2 mm over length 19.3 mm (from Z=0.0 to Z=107.2).\n9. Finish turn diameter Ø30.0 mm over length 87.9 mm (from Z=0.0 to Z=87.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02549", "images": ["images/Shaft_02549.png", "detail_png/Shaft_02549_length.png", "detail_png/Shaft_02549_diam.png", "detail_png/Shaft_02549_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.1 mm and length at least 217.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.4 mm over length 38.1 mm (from Z=0.0 to Z=164.4).\n10. Finish turn diameter Ø39.3 mm over length 53.4 mm (from Z=0.0 to Z=126.3).\n11. Finish turn diameter Ø30.0 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02687", "images": ["images/Shaft_02687.png", "detail_png/Shaft_02687_length.png", "detail_png/Shaft_02687_diam.png", "detail_png/Shaft_02687_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.5 mm and length at least 116.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.3 mm over length 12.6 mm (from Z=0.0 to Z=74.0).\n9. Finish turn diameter Ø55.3 mm over length 21.1 mm (from Z=0.0 to Z=61.4).\n10. Finish turn diameter Ø41.6 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00179", "images": ["images/Shaft_00179.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.1 mm and length at least 137.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.1 mm over length 40.5 mm (from Z=0.0 to Z=40.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 91.5 mm (from Z=0.0 to Z=91.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04101", "images": ["images/Shaft_04101.png", "detail_png/Shaft_04101_length.png", "detail_png/Shaft_04101_diam.png", "detail_png/Shaft_04101_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.1 mm and length at least 307.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 144.4 mm (from Z=0.0 to Z=144.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 107.0 mm (from Z=0.0 to Z=157.8).\n10. Finish turn diameter Ø34.0 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00023", "images": ["images/Shaft_00023.png", "detail_png/Shaft_00023_length.png", "detail_png/Shaft_00023_diam.png", "detail_png/Shaft_00023_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.1 mm and length at least 87.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.1 mm over length 5.0 mm (from Z=0.0 to Z=77.1).\n9. Finish turn diameter Ø30.0 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02695", "images": ["images/Shaft_02695.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 191.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 176.1 mm (from Z=0.0 to Z=176.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04278", "images": ["images/Shaft_04278.png", "detail_png/Shaft_04278_length.png", "detail_png/Shaft_04278_diam.png", "detail_png/Shaft_04278_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.6 mm and length at least 104.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.6 mm over length 10.0 mm (from Z=0.0 to Z=87.0).\n9. Finish turn diameter Ø61.9 mm over length 21.3 mm (from Z=0.0 to Z=77.0).\n10. Finish turn diameter Ø46.7 mm over length 26.3 mm (from Z=0.0 to Z=55.7).\n11. Finish turn diameter Ø41.3 mm over length 5.0 mm (from Z=0.0 to Z=29.4).\n12. Finish turn diameter Ø38.0 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01103", "images": ["images/Shaft_01103.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.4 mm and length at least 223.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.6 mm over length 36.1 mm (from Z=0.0 to Z=194.7).\n10. Finish turn diameter Ø40.9 mm over length 11.0 mm (from Z=0.0 to Z=158.6).\n11. Finish turn diameter Ø37.1 mm over length 37.5 mm (from Z=0.0 to Z=147.6).\n12. Finish turn diameter Ø32.3 mm over length 56.6 mm (from Z=0.0 to Z=110.1).\n13. Finish turn diameter Ø30.0 mm over length 53.5 mm (from Z=0.0 to Z=53.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02995", "images": ["images/Shaft_02995.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.7 mm and length at least 84.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.1 mm over length 9.3 mm (from Z=0.0 to Z=58.1).\n9. Finish turn diameter Ø42.6 mm over length 6.5 mm (from Z=0.0 to Z=48.8).\n10. Finish turn diameter Ø30.0 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01859", "images": ["images/Shaft_01859.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.7 mm and length at least 80.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 19.8 mm (from Z=0.0 to Z=66.1).\n9. Finish turn diameter Ø30.0 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01965", "images": ["images/Shaft_01965.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.1 mm and length at least 70.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.2 mm over length 22.1 mm (from Z=0.0 to Z=51.8).\n9. Finish turn diameter Ø30.0 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04440", "images": ["images/Shaft_04440.png", "detail_png/Shaft_04440_length.png", "detail_png/Shaft_04440_diam.png", "detail_png/Shaft_04440_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.4 mm and length at least 72.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 25.5 mm (from Z=0.0 to Z=48.1).\n9. Finish turn diameter Ø30.0 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01885", "images": ["images/Shaft_01885.png", "detail_png/Shaft_01885_length.png", "detail_png/Shaft_01885_diam.png", "detail_png/Shaft_01885_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.5 mm and length at least 86.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 62.4 mm (from Z=0.0 to Z=62.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00332", "images": ["images/Shaft_00332.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.8 mm and length at least 105.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.2 mm over length 37.4 mm (from Z=0.0 to Z=95.6).\n9. Finish turn diameter Ø30.0 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04204", "images": ["images/Shaft_04204.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.2 mm and length at least 313.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.0 mm over length 83.8 mm (from Z=0.0 to Z=274.3).\n10. Finish turn diameter Ø37.8 mm over length 44.4 mm (from Z=0.0 to Z=190.5).\n11. Finish turn diameter Ø30.2 mm over length 42.3 mm (from Z=0.0 to Z=146.1).\n12. Finish turn diameter Ø30.0 mm over length 103.8 mm (from Z=0.0 to Z=103.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04593", "images": ["images/Shaft_04593.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.6 mm and length at least 141.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 122.9 mm (from Z=0.0 to Z=122.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04170", "images": ["images/Shaft_04170.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.5 mm and length at least 293.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 94.6 mm (from Z=0.0 to Z=94.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 194.1 mm (from Z=0.0 to Z=194.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04288", "images": ["images/Shaft_04288.png", "detail_png/Shaft_04288_length.png", "detail_png/Shaft_04288_diam.png", "detail_png/Shaft_04288_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.5 mm and length at least 283.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 12.6 mm (from Z=0.0 to Z=12.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 266.0 mm (from Z=0.0 to Z=266.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03649", "images": ["images/Shaft_03649.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.2 mm and length at least 104.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.4 mm over length 21.1 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø34.6 mm over length 20.6 mm (from Z=0.0 to Z=64.7).\n10. Finish turn diameter Ø30.0 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01530", "images": ["images/Shaft_01530.png", "detail_png/Shaft_01530_length.png", "detail_png/Shaft_01530_diam.png", "detail_png/Shaft_01530_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.6 mm and length at least 271.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.6 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.4 mm over length 119.9 mm (from Z=0.0 to Z=208.7).\n10. Finish turn diameter Ø42.6 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01614", "images": ["images/Shaft_01614.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.3 mm and length at least 242.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.8 mm (from Z=0.0 to Z=170.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03050", "images": ["images/Shaft_03050.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 222.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 145.4 mm (from Z=0.0 to Z=145.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04029", "images": ["images/Shaft_04029.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 234.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 176.7 mm (from Z=0.0 to Z=176.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00106", "images": ["images/Shaft_00106.png", "detail_png/Shaft_00106_length.png", "detail_png/Shaft_00106_diam.png", "detail_png/Shaft_00106_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 177.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 159.2 mm (from Z=0.0 to Z=159.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.4 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01346", "images": ["images/Shaft_01346.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.3 mm and length at least 123.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00386", "images": ["images/Shaft_00386.png", "detail_png/Shaft_00386_length.png", "detail_png/Shaft_00386_diam.png", "detail_png/Shaft_00386_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.3 mm and length at least 89.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.3 mm over length 36.1 mm (from Z=0.0 to Z=72.1).\n9. Finish turn diameter Ø46.3 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02772", "images": ["images/Shaft_02772.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.5 mm and length at least 226.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.5 mm over length 30.1 mm (from Z=0.0 to Z=30.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.3 mm over length 46.7 mm (from Z=0.0 to Z=191.6).\n10. Finish turn diameter Ø45.3 mm over length 59.2 mm (from Z=0.0 to Z=144.9).\n11. Finish turn diameter Ø31.4 mm over length 43.1 mm (from Z=0.0 to Z=85.7).\n12. Finish turn diameter Ø30.0 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04219", "images": ["images/Shaft_04219.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.6 mm and length at least 268.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.5 mm over length 31.7 mm (from Z=0.0 to Z=206.0).\n10. Finish turn diameter Ø46.8 mm over length 56.4 mm (from Z=0.0 to Z=174.3).\n11. Finish turn diameter Ø40.2 mm over length 67.9 mm (from Z=0.0 to Z=117.9).\n12. Finish turn diameter Ø30.0 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01008", "images": ["images/Shaft_01008.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.7 mm and length at least 242.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 185.1 mm (from Z=0.0 to Z=185.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03455", "images": ["images/Shaft_03455.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 155.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 100.0 mm (from Z=0.0 to Z=100.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.2 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04755", "images": ["images/Shaft_04755.png", "detail_png/Shaft_04755_length.png", "detail_png/Shaft_04755_diam.png", "detail_png/Shaft_04755_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 233.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 190.4 mm (from Z=0.0 to Z=190.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.8 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02793", "images": ["images/Shaft_02793.png", "detail_png/Shaft_02793_length.png", "detail_png/Shaft_02793_diam.png", "detail_png/Shaft_02793_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.8 mm and length at least 69.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø75.4 mm over length 28.0 mm (from Z=0.0 to Z=59.7).\n9. Finish turn diameter Ø57.1 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02337", "images": ["images/Shaft_02337.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.9 mm and length at least 85.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.6 mm over length 31.5 mm (from Z=0.0 to Z=57.0).\n9. Finish turn diameter Ø35.2 mm over length 19.0 mm (from Z=0.0 to Z=25.5).\n10. Finish turn diameter Ø30.0 mm over length 6.5 mm (from Z=0.0 to Z=6.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02154", "images": ["images/Shaft_02154.png", "detail_png/Shaft_02154_length.png", "detail_png/Shaft_02154_diam.png", "detail_png/Shaft_02154_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.7 mm and length at least 186.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 112.2 mm (from Z=0.0 to Z=112.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.4 mm over length 23.3 mm (from Z=0.0 to Z=69.7).\n9. Finish turn diameter Ø30.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00016", "images": ["images/Shaft_00016.png", "detail_png/Shaft_00016_length.png", "detail_png/Shaft_00016_diam.png", "detail_png/Shaft_00016_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.3 mm and length at least 197.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.3 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 144.6 mm (from Z=0.0 to Z=144.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04600", "images": ["images/Shaft_04600.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.5 mm and length at least 228.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.6 mm over length 77.2 mm (from Z=0.0 to Z=141.1).\n10. Finish turn diameter Ø32.2 mm over length 63.9 mm (from Z=0.0 to Z=63.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03965", "images": ["images/Shaft_03965.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.8 mm and length at least 301.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.8 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 64.3 mm (from Z=0.0 to Z=256.9).\n10. Finish turn diameter Ø39.9 mm over length 92.0 mm (from Z=0.0 to Z=192.6).\n11. Finish turn diameter Ø36.2 mm over length 100.6 mm (from Z=0.0 to Z=100.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02398", "images": ["images/Shaft_02398.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 274.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 193.9 mm (from Z=0.0 to Z=193.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02716", "images": ["images/Shaft_02716.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.8 mm and length at least 227.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.2 mm over length 64.1 mm (from Z=0.0 to Z=196.4).\n10. Finish turn diameter Ø30.0 mm over length 132.3 mm (from Z=0.0 to Z=132.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04973", "images": ["images/Shaft_04973.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.9 mm and length at least 244.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.5 mm over length 65.9 mm (from Z=0.0 to Z=204.7).\n10. Finish turn diameter Ø49.8 mm over length 40.8 mm (from Z=0.0 to Z=138.8).\n11. Finish turn diameter Ø40.7 mm over length 38.8 mm (from Z=0.0 to Z=98.0).\n12. Finish turn diameter Ø30.0 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04750", "images": ["images/Shaft_04750.png", "detail_png/Shaft_04750_length.png", "detail_png/Shaft_04750_diam.png", "detail_png/Shaft_04750_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.8 mm and length at least 308.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 139.1 mm (from Z=0.0 to Z=139.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.9 mm over length 25.4 mm (from Z=0.0 to Z=164.7).\n10. Finish turn diameter Ø30.0 mm over length 139.3 mm (from Z=0.0 to Z=139.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02083", "images": ["images/Shaft_02083.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.5 mm and length at least 245.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 160.7 mm (from Z=0.0 to Z=160.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00689", "images": ["images/Shaft_00689.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.9 mm and length at least 280.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.4 mm over length 126.9 mm (from Z=0.0 to Z=246.0).\n10. Finish turn diameter Ø52.2 mm over length 119.1 mm (from Z=0.0 to Z=119.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03214", "images": ["images/Shaft_03214.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.2 mm and length at least 236.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 96.3 mm (from Z=0.0 to Z=96.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.9 mm over length 39.2 mm (from Z=0.0 to Z=135.6).\n10. Finish turn diameter Ø30.0 mm over length 96.4 mm (from Z=0.0 to Z=96.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04634", "images": ["images/Shaft_04634.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.0 mm and length at least 307.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.0 mm over length 90.8 mm (from Z=0.0 to Z=90.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 211.7 mm (from Z=0.0 to Z=211.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00834", "images": ["images/Shaft_00834.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.1 mm and length at least 318.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 235.3 mm (from Z=0.0 to Z=235.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00383", "images": ["images/Shaft_00383.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 154.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 114.2 mm (from Z=0.0 to Z=114.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.1 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01431", "images": ["images/Shaft_01431.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.1 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 61.9 mm (from Z=0.0 to Z=61.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.4 mm over length 48.6 mm (from Z=0.0 to Z=139.5).\n10. Finish turn diameter Ø45.5 mm over length 41.7 mm (from Z=0.0 to Z=90.9).\n11. Finish turn diameter Ø40.5 mm over length 49.2 mm (from Z=0.0 to Z=49.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04532", "images": ["images/Shaft_04532.png", "detail_png/Shaft_04532_length.png", "detail_png/Shaft_04532_diam.png", "detail_png/Shaft_04532_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.6 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 112.3 mm (from Z=0.0 to Z=112.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.7 mm over length 78.8 mm (from Z=0.0 to Z=126.6).\n10. Finish turn diameter Ø30.0 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04479", "images": ["images/Shaft_04479.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.9 mm and length at least 130.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.9 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 11.8 mm (from Z=0.0 to Z=94.0).\n9. Finish turn diameter Ø53.5 mm over length 32.1 mm (from Z=0.0 to Z=82.2).\n10. Finish turn diameter Ø36.0 mm over length 33.3 mm (from Z=0.0 to Z=50.1).\n11. Finish turn diameter Ø30.0 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03947", "images": ["images/Shaft_03947.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 101.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.6 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03784", "images": ["images/Shaft_03784.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 295.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 221.6 mm (from Z=0.0 to Z=221.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01874", "images": ["images/Shaft_01874.png", "detail_png/Shaft_01874_length.png", "detail_png/Shaft_01874_diam.png", "detail_png/Shaft_01874_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.7 mm and length at least 196.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.9 mm (from Z=0.0 to Z=149.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01987", "images": ["images/Shaft_01987.png", "detail_png/Shaft_01987_length.png", "detail_png/Shaft_01987_diam.png", "detail_png/Shaft_01987_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.6 mm and length at least 248.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 236.0 mm (from Z=0.0 to Z=236.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04068", "images": ["images/Shaft_04068.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.0 mm and length at least 292.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 86.9 mm (from Z=0.0 to Z=86.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.6 mm (from Z=0.0 to Z=200.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01460", "images": ["images/Shaft_01460.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.0 mm and length at least 277.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 79.3 mm (from Z=0.0 to Z=79.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 193.5 mm (from Z=0.0 to Z=193.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01808", "images": ["images/Shaft_01808.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.0 mm and length at least 254.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 65.8 mm (from Z=0.0 to Z=65.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.2 mm over length 45.4 mm (from Z=0.0 to Z=183.3).\n10. Finish turn diameter Ø49.7 mm over length 27.1 mm (from Z=0.0 to Z=137.9).\n11. Finish turn diameter Ø34.5 mm over length 60.4 mm (from Z=0.0 to Z=110.8).\n12. Finish turn diameter Ø30.0 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00167", "images": ["images/Shaft_00167.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.4 mm and length at least 181.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.7 mm over length 13.8 mm (from Z=0.0 to Z=153.9).\n10. Finish turn diameter Ø30.0 mm over length 140.1 mm (from Z=0.0 to Z=140.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02027", "images": ["images/Shaft_02027.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.8 mm and length at least 155.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 14.8 mm (from Z=0.0 to Z=117.8).\n9. Finish turn diameter Ø42.6 mm over length 31.4 mm (from Z=0.0 to Z=103.0).\n10. Finish turn diameter Ø30.0 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00475", "images": ["images/Shaft_00475.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.8 mm and length at least 233.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 103.5 mm (from Z=0.0 to Z=154.0).\n10. Finish turn diameter Ø30.0 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01787", "images": ["images/Shaft_01787.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.0 mm and length at least 125.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 32.1 mm (from Z=0.0 to Z=32.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 12.9 mm (from Z=0.0 to Z=87.9).\n9. Finish turn diameter Ø36.0 mm over length 20.9 mm (from Z=0.0 to Z=75.0).\n10. Finish turn diameter Ø30.0 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01913", "images": ["images/Shaft_01913.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.8 mm and length at least 78.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.7 mm over length 15.3 mm (from Z=0.0 to Z=36.6).\n9. Finish turn diameter Ø30.0 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00669", "images": ["images/Shaft_00669.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.0 mm and length at least 287.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.9 mm over length 19.7 mm (from Z=0.0 to Z=241.9).\n10. Finish turn diameter Ø30.0 mm over length 222.2 mm (from Z=0.0 to Z=222.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04404", "images": ["images/Shaft_04404.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.4 mm and length at least 252.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 116.5 mm (from Z=0.0 to Z=116.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 131.4 mm (from Z=0.0 to Z=131.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01926", "images": ["images/Shaft_01926.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.0 mm and length at least 93.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 37.2 mm (from Z=0.0 to Z=37.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.8 mm over length 16.4 mm (from Z=0.0 to Z=51.1).\n9. Finish turn diameter Ø38.7 mm over length 29.3 mm (from Z=0.0 to Z=34.7).\n10. Finish turn diameter Ø30.0 mm over length 5.4 mm (from Z=0.0 to Z=5.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00146", "images": ["images/Shaft_00146.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.7 mm and length at least 191.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.3 mm over length 35.7 mm (from Z=0.0 to Z=169.6).\n9. Finish turn diameter Ø45.9 mm over length 40.2 mm (from Z=0.0 to Z=133.9).\n10. Finish turn diameter Ø34.0 mm over length 19.1 mm (from Z=0.0 to Z=93.7).\n11. Finish turn diameter Ø30.0 mm over length 74.6 mm (from Z=0.0 to Z=74.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04802", "images": ["images/Shaft_04802.png", "detail_png/Shaft_04802_length.png", "detail_png/Shaft_04802_diam.png", "detail_png/Shaft_04802_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.8 mm and length at least 158.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 118.7 mm (from Z=0.0 to Z=118.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00941", "images": ["images/Shaft_00941.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.6 mm and length at least 298.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 77.7 mm (from Z=0.0 to Z=77.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.4 mm over length 95.7 mm (from Z=0.0 to Z=216.1).\n10. Finish turn diameter Ø56.3 mm over length 91.3 mm (from Z=0.0 to Z=120.4).\n11. Finish turn diameter Ø50.1 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03062", "images": ["images/Shaft_03062.png", "detail_png/Shaft_03062_length.png", "detail_png/Shaft_03062_diam.png", "detail_png/Shaft_03062_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.8 mm and length at least 89.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.8 mm over length 24.2 mm (from Z=0.0 to Z=52.5).\n9. Finish turn diameter Ø62.7 mm over length 18.3 mm (from Z=0.0 to Z=28.3).\n10. Finish turn diameter Ø56.8 mm over length 5.0 mm (from Z=0.0 to Z=10.0).\n11. Finish turn diameter Ø37.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00608", "images": ["images/Shaft_00608.png", "detail_png/Shaft_00608_length.png", "detail_png/Shaft_00608_diam.png", "detail_png/Shaft_00608_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.2 mm and length at least 200.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.4 mm over length 33.3 mm (from Z=0.0 to Z=156.6).\n10. Finish turn diameter Ø40.7 mm over length 47.6 mm (from Z=0.0 to Z=123.3).\n11. Finish turn diameter Ø30.0 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03505", "images": ["images/Shaft_03505.png", "detail_png/Shaft_03505_length.png", "detail_png/Shaft_03505_diam.png", "detail_png/Shaft_03505_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.8 mm and length at least 99.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.4 mm over length 16.4 mm (from Z=0.0 to Z=59.0).\n9. Finish turn diameter Ø46.1 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00217", "images": ["images/Shaft_00217.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.2 mm and length at least 236.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 78.8 mm (from Z=0.0 to Z=201.4).\n10. Finish turn diameter Ø49.9 mm over length 74.6 mm (from Z=0.0 to Z=122.6).\n11. Finish turn diameter Ø44.8 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01802", "images": ["images/Shaft_01802.png", "detail_png/Shaft_01802_length.png", "detail_png/Shaft_01802_diam.png", "detail_png/Shaft_01802_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.3 mm and length at least 272.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.6 mm over length 46.7 mm (from Z=0.0 to Z=227.2).\n10. Finish turn diameter Ø30.0 mm over length 180.5 mm (from Z=0.0 to Z=180.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04291", "images": ["images/Shaft_04291.png", "detail_png/Shaft_04291_length.png", "detail_png/Shaft_04291_diam.png", "detail_png/Shaft_04291_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.2 mm and length at least 79.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.5 mm over length 32.3 mm (from Z=0.0 to Z=58.3).\n9. Finish turn diameter Ø53.7 mm over length 5.0 mm (from Z=0.0 to Z=26.0).\n10. Finish turn diameter Ø50.2 mm over length 13.2 mm (from Z=0.0 to Z=21.0).\n11. Finish turn diameter Ø44.4 mm over length 7.8 mm (from Z=0.0 to Z=7.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04686", "images": ["images/Shaft_04686.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.6 mm and length at least 291.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 55.4 mm (from Z=0.0 to Z=55.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.0 mm over length 40.5 mm (from Z=0.0 to Z=231.1).\n10. Finish turn diameter Ø52.7 mm over length 36.6 mm (from Z=0.0 to Z=190.6).\n11. Finish turn diameter Ø47.4 mm over length 60.8 mm (from Z=0.0 to Z=154.0).\n12. Finish turn diameter Ø37.6 mm over length 84.4 mm (from Z=0.0 to Z=93.2).\n13. Finish turn diameter Ø30.5 mm over length 8.8 mm (from Z=0.0 to Z=8.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04804", "images": ["images/Shaft_04804.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.9 mm and length at least 240.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 77.8 mm (from Z=0.0 to Z=156.1).\n10. Finish turn diameter Ø54.9 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00619", "images": ["images/Shaft_00619.png", "detail_png/Shaft_00619_length.png", "detail_png/Shaft_00619_diam.png", "detail_png/Shaft_00619_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.3 mm and length at least 121.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 26.6 mm (from Z=0.0 to Z=102.7).\n9. Finish turn diameter Ø36.9 mm over length 40.8 mm (from Z=0.0 to Z=76.1).\n10. Finish turn diameter Ø30.0 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02012", "images": ["images/Shaft_02012.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.3 mm and length at least 65.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.0 mm over length 21.8 mm (from Z=0.0 to Z=31.9).\n9. Finish turn diameter Ø49.1 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04326", "images": ["images/Shaft_04326.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.3 mm and length at least 268.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 52.7 mm (from Z=0.0 to Z=52.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 210.6 mm (from Z=0.0 to Z=210.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04596", "images": ["images/Shaft_04596.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.5 mm and length at least 91.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.6 mm over length 46.3 mm (from Z=0.0 to Z=62.0).\n9. Finish turn diameter Ø40.7 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01784", "images": ["images/Shaft_01784.png", "detail_png/Shaft_01784_length.png", "detail_png/Shaft_01784_diam.png", "detail_png/Shaft_01784_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.9 mm and length at least 235.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 31.4 mm (from Z=0.0 to Z=31.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 66.3 mm (from Z=0.0 to Z=199.5).\n10. Finish turn diameter Ø37.8 mm over length 20.7 mm (from Z=0.0 to Z=133.2).\n11. Finish turn diameter Ø30.0 mm over length 112.5 mm (from Z=0.0 to Z=112.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01282", "images": ["images/Shaft_01282.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.2 mm and length at least 164.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.5 mm over length 59.5 mm (from Z=0.0 to Z=121.8).\n9. Finish turn diameter Ø54.0 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02117", "images": ["images/Shaft_02117.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.5 mm and length at least 183.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.5 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 130.2 mm (from Z=0.0 to Z=130.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01080", "images": ["images/Shaft_01080.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.5 mm and length at least 65.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 7.7 mm (from Z=0.0 to Z=48.8).\n9. Finish turn diameter Ø54.4 mm over length 15.6 mm (from Z=0.0 to Z=41.1).\n10. Finish turn diameter Ø44.6 mm over length 16.9 mm (from Z=0.0 to Z=25.5).\n11. Finish turn diameter Ø36.3 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03582", "images": ["images/Shaft_03582.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.6 mm and length at least 72.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 14.3 mm (from Z=0.0 to Z=51.2).\n9. Finish turn diameter Ø44.9 mm over length 9.2 mm (from Z=0.0 to Z=36.9).\n10. Finish turn diameter Ø30.0 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03348", "images": ["images/Shaft_03348.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.6 mm and length at least 189.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø75.8 mm over length 20.3 mm (from Z=0.0 to Z=152.3).\n9. Finish turn diameter Ø55.8 mm over length 56.8 mm (from Z=0.0 to Z=132.0).\n10. Finish turn diameter Ø49.6 mm over length 49.5 mm (from Z=0.0 to Z=75.2).\n11. Finish turn diameter Ø42.5 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01158", "images": ["images/Shaft_01158.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.6 mm and length at least 277.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.6 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.0 mm over length 81.7 mm (from Z=0.0 to Z=234.5).\n10. Finish turn diameter Ø30.0 mm over length 152.8 mm (from Z=0.0 to Z=152.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01761", "images": ["images/Shaft_01761.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.2 mm and length at least 266.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.4 mm over length 40.2 mm (from Z=0.0 to Z=210.1).\n10. Finish turn diameter Ø43.3 mm over length 69.3 mm (from Z=0.0 to Z=169.9).\n11. Finish turn diameter Ø37.3 mm over length 40.2 mm (from Z=0.0 to Z=100.6).\n12. Finish turn diameter Ø30.0 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01476", "images": ["images/Shaft_01476.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.4 mm and length at least 310.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 48.9 mm (from Z=0.0 to Z=48.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 38.3 mm (from Z=0.0 to Z=256.8).\n10. Finish turn diameter Ø30.0 mm over length 218.5 mm (from Z=0.0 to Z=218.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01150", "images": ["images/Shaft_01150.png", "detail_png/Shaft_01150_length.png", "detail_png/Shaft_01150_diam.png", "detail_png/Shaft_01150_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.3 mm and length at least 80.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03207", "images": ["images/Shaft_03207.png", "detail_png/Shaft_03207_length.png", "detail_png/Shaft_03207_diam.png", "detail_png/Shaft_03207_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.1 mm and length at least 217.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.1 mm over length 52.8 mm (from Z=0.0 to Z=52.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.0 mm over length 41.6 mm (from Z=0.0 to Z=159.9).\n10. Finish turn diameter Ø44.2 mm over length 29.0 mm (from Z=0.0 to Z=118.3).\n11. Finish turn diameter Ø33.9 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04358", "images": ["images/Shaft_04358.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.9 mm and length at least 239.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 18.3 mm (from Z=0.0 to Z=204.8).\n10. Finish turn diameter Ø32.3 mm over length 19.2 mm (from Z=0.0 to Z=186.5).\n11. Finish turn diameter Ø30.0 mm over length 167.3 mm (from Z=0.0 to Z=167.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00180", "images": ["images/Shaft_00180.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.0 mm and length at least 146.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 26.9 mm (from Z=0.0 to Z=110.3).\n9. Finish turn diameter Ø62.2 mm over length 33.5 mm (from Z=0.0 to Z=83.4).\n10. Finish turn diameter Ø58.1 mm over length 20.5 mm (from Z=0.0 to Z=49.9).\n11. Finish turn diameter Ø41.6 mm over length 19.4 mm (from Z=0.0 to Z=29.4).\n12. Finish turn diameter Ø30.0 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03106", "images": ["images/Shaft_03106.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 291.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 206.2 mm (from Z=0.0 to Z=206.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03939", "images": ["images/Shaft_03939.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.9 mm and length at least 231.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.2 mm over length 41.2 mm (from Z=0.0 to Z=152.4).\n10. Finish turn diameter Ø35.6 mm over length 37.7 mm (from Z=0.0 to Z=111.2).\n11. Finish turn diameter Ø30.0 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02857", "images": ["images/Shaft_02857.png", "detail_png/Shaft_02857_length.png", "detail_png/Shaft_02857_diam.png", "detail_png/Shaft_02857_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.7 mm and length at least 236.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.4 mm over length 40.8 mm (from Z=0.0 to Z=183.7).\n10. Finish turn diameter Ø37.2 mm over length 32.0 mm (from Z=0.0 to Z=142.9).\n11. Finish turn diameter Ø33.1 mm over length 33.0 mm (from Z=0.0 to Z=110.9).\n12. Finish turn diameter Ø30.0 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04262", "images": ["images/Shaft_04262.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 84.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.3 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03228", "images": ["images/Shaft_03228.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.3 mm and length at least 310.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 74.4 mm (from Z=0.0 to Z=244.0).\n10. Finish turn diameter Ø48.9 mm over length 31.9 mm (from Z=0.0 to Z=169.6).\n11. Finish turn diameter Ø34.2 mm over length 59.7 mm (from Z=0.0 to Z=137.7).\n12. Finish turn diameter Ø30.0 mm over length 78.0 mm (from Z=0.0 to Z=78.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02172", "images": ["images/Shaft_02172.png", "detail_png/Shaft_02172_length.png", "detail_png/Shaft_02172_diam.png", "detail_png/Shaft_02172_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.9 mm and length at least 290.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 80.1 mm (from Z=0.0 to Z=80.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 63.3 mm (from Z=0.0 to Z=205.1).\n10. Finish turn diameter Ø34.9 mm over length 77.4 mm (from Z=0.0 to Z=141.8).\n11. Finish turn diameter Ø30.0 mm over length 64.4 mm (from Z=0.0 to Z=64.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04162", "images": ["images/Shaft_04162.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.3 mm and length at least 232.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.5 mm over length 113.3 mm (from Z=0.0 to Z=159.4).\n10. Finish turn diameter Ø30.0 mm over length 46.1 mm (from Z=0.0 to Z=46.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00367", "images": ["images/Shaft_00367.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.0 mm and length at least 178.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 43.0 mm (from Z=0.0 to Z=146.2).\n9. Finish turn diameter Ø49.0 mm over length 41.9 mm (from Z=0.0 to Z=103.2).\n10. Finish turn diameter Ø33.5 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04046", "images": ["images/Shaft_04046.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 115.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.3 mm over length 28.0 mm (from Z=0.0 to Z=100.4).\n9. Finish turn diameter Ø54.1 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01917", "images": ["images/Shaft_01917.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.8 mm and length at least 290.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.0 mm over length 96.1 mm (from Z=0.0 to Z=242.0).\n10. Finish turn diameter Ø30.0 mm over length 145.9 mm (from Z=0.0 to Z=145.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01389", "images": ["images/Shaft_01389.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 215.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 163.3 mm (from Z=0.0 to Z=163.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.8 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02018", "images": ["images/Shaft_02018.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.1 mm and length at least 215.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 177.5 mm (from Z=0.0 to Z=177.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04504", "images": ["images/Shaft_04504.png", "detail_png/Shaft_04504_length.png", "detail_png/Shaft_04504_diam.png", "detail_png/Shaft_04504_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.7 mm and length at least 105.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.7 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.0 mm over length 12.9 mm (from Z=0.0 to Z=66.5).\n9. Finish turn diameter Ø30.0 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03303", "images": ["images/Shaft_03303.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.3 mm and length at least 266.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.3 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.0 mm over length 84.0 mm (from Z=0.0 to Z=213.4).\n10. Finish turn diameter Ø30.0 mm over length 129.4 mm (from Z=0.0 to Z=129.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04001", "images": ["images/Shaft_04001.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.6 mm and length at least 277.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 51.3 mm (from Z=0.0 to Z=51.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.4 mm over length 51.0 mm (from Z=0.0 to Z=221.3).\n10. Finish turn diameter Ø44.0 mm over length 62.0 mm (from Z=0.0 to Z=170.3).\n11. Finish turn diameter Ø39.9 mm over length 15.8 mm (from Z=0.0 to Z=108.3).\n12. Finish turn diameter Ø30.0 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03498", "images": ["images/Shaft_03498.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.8 mm and length at least 89.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.1 mm over length 23.4 mm (from Z=0.0 to Z=40.2).\n9. Finish turn diameter Ø55.8 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03114", "images": ["images/Shaft_03114.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.2 mm and length at least 252.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 119.9 mm (from Z=0.0 to Z=119.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 127.5 mm (from Z=0.0 to Z=127.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04006", "images": ["images/Shaft_04006.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.4 mm and length at least 201.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.8 mm over length 50.2 mm (from Z=0.0 to Z=138.2).\n10. Finish turn diameter Ø47.5 mm over length 43.0 mm (from Z=0.0 to Z=88.0).\n11. Finish turn diameter Ø36.6 mm over length 26.2 mm (from Z=0.0 to Z=45.0).\n12. Finish turn diameter Ø30.0 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02291", "images": ["images/Shaft_02291.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.8 mm and length at least 251.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 49.2 mm (from Z=0.0 to Z=49.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 197.6 mm (from Z=0.0 to Z=197.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04757", "images": ["images/Shaft_04757.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.1 mm and length at least 247.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 77.0 mm (from Z=0.0 to Z=180.0).\n10. Finish turn diameter Ø41.2 mm over length 52.8 mm (from Z=0.0 to Z=103.0).\n11. Finish turn diameter Ø30.0 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01519", "images": ["images/Shaft_01519.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 309.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 252.5 mm (from Z=0.0 to Z=252.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02749", "images": ["images/Shaft_02749.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.5 mm and length at least 119.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.7 mm over length 35.4 mm (from Z=0.0 to Z=83.6).\n9. Finish turn diameter Ø48.6 mm over length 34.7 mm (from Z=0.0 to Z=48.2).\n10. Finish turn diameter Ø44.6 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01616", "images": ["images/Shaft_01616.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.7 mm and length at least 241.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 19.3 mm (from Z=0.0 to Z=181.6).\n10. Finish turn diameter Ø30.0 mm over length 162.3 mm (from Z=0.0 to Z=162.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01239", "images": ["images/Shaft_01239.png", "detail_png/Shaft_01239_length.png", "detail_png/Shaft_01239_diam.png", "detail_png/Shaft_01239_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.8 mm and length at least 232.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø74.2 mm over length 11.5 mm (from Z=0.0 to Z=172.6).\n10. Finish turn diameter Ø62.5 mm over length 34.9 mm (from Z=0.0 to Z=161.1).\n11. Finish turn diameter Ø58.7 mm over length 60.2 mm (from Z=0.0 to Z=126.2).\n12. Finish turn diameter Ø53.1 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01560", "images": ["images/Shaft_01560.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.7 mm and length at least 280.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 105.6 mm (from Z=0.0 to Z=105.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.4 mm over length 89.3 mm (from Z=0.0 to Z=170.0).\n10. Finish turn diameter Ø30.0 mm over length 80.7 mm (from Z=0.0 to Z=80.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02538", "images": ["images/Shaft_02538.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.5 mm and length at least 255.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 108.2 mm (from Z=0.0 to Z=108.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 142.1 mm (from Z=0.0 to Z=142.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02066", "images": ["images/Shaft_02066.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 125.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 110.2 mm (from Z=0.0 to Z=110.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04595", "images": ["images/Shaft_04595.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.6 mm and length at least 251.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.6 mm over length 68.2 mm (from Z=0.0 to Z=68.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.5 mm over length 46.2 mm (from Z=0.0 to Z=178.5).\n10. Finish turn diameter Ø30.0 mm over length 132.3 mm (from Z=0.0 to Z=132.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00021", "images": ["images/Shaft_00021.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.7 mm and length at least 311.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.0 mm over length 71.1 mm (from Z=0.0 to Z=255.2).\n10. Finish turn diameter Ø30.0 mm over length 184.1 mm (from Z=0.0 to Z=184.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00186", "images": ["images/Shaft_00186.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.3 mm and length at least 197.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 51.5 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø30.0 mm over length 95.0 mm (from Z=0.0 to Z=95.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02450", "images": ["images/Shaft_02450.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.6 mm and length at least 122.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 15.2 mm (from Z=0.0 to Z=86.7).\n9. Finish turn diameter Ø36.0 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02747", "images": ["images/Shaft_02747.png", "detail_png/Shaft_02747_length.png", "detail_png/Shaft_02747_diam.png", "detail_png/Shaft_02747_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.7 mm and length at least 238.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 172.7 mm (from Z=0.0 to Z=172.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02483", "images": ["images/Shaft_02483.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.6 mm and length at least 313.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.6 mm over length 63.2 mm (from Z=0.0 to Z=63.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.4 mm over length 153.5 mm (from Z=0.0 to Z=245.1).\n10. Finish turn diameter Ø45.3 mm over length 91.6 mm (from Z=0.0 to Z=91.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01451", "images": ["images/Shaft_01451.png", "detail_png/Shaft_01451_length.png", "detail_png/Shaft_01451_diam.png", "detail_png/Shaft_01451_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.2 mm and length at least 194.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 56.0 mm (from Z=0.0 to Z=158.7).\n10. Finish turn diameter Ø30.0 mm over length 102.7 mm (from Z=0.0 to Z=102.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01928", "images": ["images/Shaft_01928.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.0 mm and length at least 181.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.5 mm over length 37.7 mm (from Z=0.0 to Z=150.9).\n9. Finish turn diameter Ø59.3 mm over length 13.4 mm (from Z=0.0 to Z=113.2).\n10. Finish turn diameter Ø40.6 mm over length 22.1 mm (from Z=0.0 to Z=99.8).\n11. Finish turn diameter Ø30.0 mm over length 77.7 mm (from Z=0.0 to Z=77.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03313", "images": ["images/Shaft_03313.png", "detail_png/Shaft_03313_length.png", "detail_png/Shaft_03313_diam.png", "detail_png/Shaft_03313_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.7 mm and length at least 67.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.0 mm over length 16.0 mm (from Z=0.0 to Z=52.1).\n9. Finish turn diameter Ø43.3 mm over length 8.5 mm (from Z=0.0 to Z=36.1).\n10. Finish turn diameter Ø39.1 mm over length 6.7 mm (from Z=0.0 to Z=27.6).\n11. Finish turn diameter Ø30.0 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01363", "images": ["images/Shaft_01363.png", "detail_png/Shaft_01363_length.png", "detail_png/Shaft_01363_diam.png", "detail_png/Shaft_01363_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.9 mm and length at least 71.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.8 mm over length 10.3 mm (from Z=0.0 to Z=56.3).\n9. Finish turn diameter Ø49.9 mm over length 8.0 mm (from Z=0.0 to Z=46.0).\n10. Finish turn diameter Ø42.2 mm over length 17.6 mm (from Z=0.0 to Z=38.0).\n11. Finish turn diameter Ø39.2 mm over length 15.2 mm (from Z=0.0 to Z=20.4).\n12. Finish turn diameter Ø30.0 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04642", "images": ["images/Shaft_04642.png", "detail_png/Shaft_04642_length.png", "detail_png/Shaft_04642_diam.png", "detail_png/Shaft_04642_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 137.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 94.8 mm (from Z=0.0 to Z=94.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00240", "images": ["images/Shaft_00240.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.3 mm and length at least 102.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.3 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.5 mm over length 7.1 mm (from Z=0.0 to Z=82.9).\n9. Finish turn diameter Ø37.8 mm over length 22.4 mm (from Z=0.0 to Z=75.8).\n10. Finish turn diameter Ø30.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02281", "images": ["images/Shaft_02281.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.6 mm and length at least 282.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 97.7 mm (from Z=0.0 to Z=97.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.0 mm over length 47.7 mm (from Z=0.0 to Z=180.2).\n10. Finish turn diameter Ø41.9 mm over length 93.8 mm (from Z=0.0 to Z=132.5).\n11. Finish turn diameter Ø36.5 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00390", "images": ["images/Shaft_00390.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.6 mm and length at least 273.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 132.2 mm (from Z=0.0 to Z=132.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 23.4 mm (from Z=0.0 to Z=136.3).\n10. Finish turn diameter Ø34.1 mm over length 46.6 mm (from Z=0.0 to Z=112.9).\n11. Finish turn diameter Ø30.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04881", "images": ["images/Shaft_04881.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.7 mm and length at least 167.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 7.6 mm (from Z=0.0 to Z=102.3).\n9. Finish turn diameter Ø36.1 mm over length 48.5 mm (from Z=0.0 to Z=94.7).\n10. Finish turn diameter Ø30.0 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01049", "images": ["images/Shaft_01049.png", "detail_png/Shaft_01049_length.png", "detail_png/Shaft_01049_diam.png", "detail_png/Shaft_01049_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.3 mm and length at least 230.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.2 mm over length 125.6 mm (from Z=0.0 to Z=160.0).\n10. Finish turn diameter Ø30.0 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02446", "images": ["images/Shaft_02446.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 124.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 109.5 mm (from Z=0.0 to Z=109.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01733", "images": ["images/Shaft_01733.png", "detail_png/Shaft_01733_length.png", "detail_png/Shaft_01733_diam.png", "detail_png/Shaft_01733_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.9 mm and length at least 315.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.0 mm over length 119.1 mm (from Z=0.0 to Z=275.0).\n10. Finish turn diameter Ø31.9 mm over length 57.0 mm (from Z=0.0 to Z=155.9).\n11. Finish turn diameter Ø30.0 mm over length 98.9 mm (from Z=0.0 to Z=98.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01570", "images": ["images/Shaft_01570.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.1 mm and length at least 196.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.1 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.5 mm over length 17.9 mm (from Z=0.0 to Z=165.8).\n10. Finish turn diameter Ø33.1 mm over length 22.4 mm (from Z=0.0 to Z=147.9).\n11. Finish turn diameter Ø30.0 mm over length 125.5 mm (from Z=0.0 to Z=125.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00869", "images": ["images/Shaft_00869.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.4 mm and length at least 276.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 99.8 mm (from Z=0.0 to Z=99.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.8 mm over length 119.6 mm (from Z=0.0 to Z=171.7).\n10. Finish turn diameter Ø41.5 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03169", "images": ["images/Shaft_03169.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.8 mm and length at least 134.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.7 mm over length 35.1 mm (from Z=0.0 to Z=120.2).\n9. Finish turn diameter Ø33.0 mm over length 30.3 mm (from Z=0.0 to Z=85.1).\n10. Finish turn diameter Ø30.0 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03895", "images": ["images/Shaft_03895.png", "detail_png/Shaft_03895_length.png", "detail_png/Shaft_03895_diam.png", "detail_png/Shaft_03895_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.2 mm and length at least 111.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.3 mm over length 46.3 mm (from Z=0.0 to Z=87.7).\n9. Finish turn diameter Ø61.6 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02838", "images": ["images/Shaft_02838.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 220.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 197.1 mm (from Z=0.0 to Z=197.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01324", "images": ["images/Shaft_01324.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.8 mm and length at least 158.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.4 mm over length 36.1 mm (from Z=0.0 to Z=124.5).\n9. Finish turn diameter Ø58.3 mm over length 38.0 mm (from Z=0.0 to Z=88.4).\n10. Finish turn diameter Ø51.2 mm over length 18.6 mm (from Z=0.0 to Z=50.4).\n11. Finish turn diameter Ø45.9 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00545", "images": ["images/Shaft_00545.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.3 mm and length at least 261.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.1 mm over length 45.4 mm (from Z=0.0 to Z=189.9).\n10. Finish turn diameter Ø33.8 mm over length 43.5 mm (from Z=0.0 to Z=144.5).\n11. Finish turn diameter Ø30.0 mm over length 101.0 mm (from Z=0.0 to Z=101.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01920", "images": ["images/Shaft_01920.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.4 mm and length at least 297.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 32.1 mm (from Z=0.0 to Z=32.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.4 mm over length 97.7 mm (from Z=0.0 to Z=259.9).\n10. Finish turn diameter Ø46.1 mm over length 68.2 mm (from Z=0.0 to Z=162.2).\n11. Finish turn diameter Ø35.2 mm over length 11.8 mm (from Z=0.0 to Z=94.0).\n12. Finish turn diameter Ø30.0 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03608", "images": ["images/Shaft_03608.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.2 mm and length at least 274.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.2 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.6 mm over length 64.8 mm (from Z=0.0 to Z=192.9).\n10. Finish turn diameter Ø37.2 mm over length 69.5 mm (from Z=0.0 to Z=128.1).\n11. Finish turn diameter Ø30.0 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00351", "images": ["images/Shaft_00351.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.2 mm and length at least 111.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 97.6 mm (from Z=0.0 to Z=97.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03975", "images": ["images/Shaft_03975.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 197.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 121.0 mm (from Z=0.0 to Z=121.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03966", "images": ["images/Shaft_03966.png", "detail_png/Shaft_03966_length.png", "detail_png/Shaft_03966_diam.png", "detail_png/Shaft_03966_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.2 mm and length at least 318.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.2 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 290.5 mm (from Z=0.0 to Z=290.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02802", "images": ["images/Shaft_02802.png", "detail_png/Shaft_02802_length.png", "detail_png/Shaft_02802_diam.png", "detail_png/Shaft_02802_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.6 mm and length at least 218.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 39.4 mm (from Z=0.0 to Z=39.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 39.9 mm (from Z=0.0 to Z=174.4).\n10. Finish turn diameter Ø47.6 mm over length 7.9 mm (from Z=0.0 to Z=134.5).\n11. Finish turn diameter Ø34.4 mm over length 25.0 mm (from Z=0.0 to Z=126.6).\n12. Finish turn diameter Ø30.0 mm over length 101.6 mm (from Z=0.0 to Z=101.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04721", "images": ["images/Shaft_04721.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.4 mm and length at least 295.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.4 mm over length 76.8 mm (from Z=0.0 to Z=76.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.5 mm over length 42.1 mm (from Z=0.0 to Z=214.0).\n10. Finish turn diameter Ø43.3 mm over length 65.3 mm (from Z=0.0 to Z=171.9).\n11. Finish turn diameter Ø30.0 mm over length 106.6 mm (from Z=0.0 to Z=106.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04683", "images": ["images/Shaft_04683.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.3 mm and length at least 281.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 220.8 mm (from Z=0.0 to Z=220.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01017", "images": ["images/Shaft_01017.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.8 mm and length at least 114.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.8 mm over length 38.5 mm (from Z=0.0 to Z=80.2).\n9. Finish turn diameter Ø61.5 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01847", "images": ["images/Shaft_01847.png", "detail_png/Shaft_01847_length.png", "detail_png/Shaft_01847_diam.png", "detail_png/Shaft_01847_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 177.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.3 mm (from Z=0.0 to Z=136.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02530", "images": ["images/Shaft_02530.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.3 mm and length at least 286.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 134.8 mm (from Z=0.0 to Z=134.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.2 mm over length 49.7 mm (from Z=0.0 to Z=146.3).\n10. Finish turn diameter Ø56.2 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04565", "images": ["images/Shaft_04565.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 169.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 105.9 mm (from Z=0.0 to Z=105.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.4 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04678", "images": ["images/Shaft_04678.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.3 mm and length at least 106.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.5 mm over length 7.9 mm (from Z=0.0 to Z=70.9).\n9. Finish turn diameter Ø62.5 mm over length 15.8 mm (from Z=0.0 to Z=63.0).\n10. Finish turn diameter Ø47.4 mm over length 10.4 mm (from Z=0.0 to Z=47.2).\n11. Finish turn diameter Ø32.7 mm over length 6.1 mm (from Z=0.0 to Z=36.8).\n12. Finish turn diameter Ø30.0 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04571", "images": ["images/Shaft_04571.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 67.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.4 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03651", "images": ["images/Shaft_03651.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.8 mm and length at least 88.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 63.8 mm (from Z=0.0 to Z=63.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04452", "images": ["images/Shaft_04452.png", "detail_png/Shaft_04452_length.png", "detail_png/Shaft_04452_diam.png", "detail_png/Shaft_04452_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.8 mm and length at least 87.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.6 mm over length 23.9 mm (from Z=0.0 to Z=68.9).\n9. Finish turn diameter Ø62.8 mm over length 5.8 mm (from Z=0.0 to Z=45.0).\n10. Finish turn diameter Ø52.1 mm over length 13.9 mm (from Z=0.0 to Z=39.2).\n11. Finish turn diameter Ø40.4 mm over length 17.0 mm (from Z=0.0 to Z=25.3).\n12. Finish turn diameter Ø36.4 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04304", "images": ["images/Shaft_04304.png", "detail_png/Shaft_04304_length.png", "detail_png/Shaft_04304_diam.png", "detail_png/Shaft_04304_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.0 mm and length at least 293.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 82.3 mm (from Z=0.0 to Z=82.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.3 mm over length 49.8 mm (from Z=0.0 to Z=205.8).\n10. Finish turn diameter Ø51.7 mm over length 61.7 mm (from Z=0.0 to Z=156.0).\n11. Finish turn diameter Ø47.0 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00738", "images": ["images/Shaft_00738.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.1 mm and length at least 264.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.1 mm over length 139.5 mm (from Z=0.0 to Z=139.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.9 mm (from Z=0.0 to Z=119.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01713", "images": ["images/Shaft_01713.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.1 mm and length at least 125.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.7 mm over length 42.2 mm (from Z=0.0 to Z=102.8).\n9. Finish turn diameter Ø53.3 mm over length 38.7 mm (from Z=0.0 to Z=60.6).\n10. Finish turn diameter Ø47.1 mm over length 21.9 mm (from Z=0.0 to Z=21.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00775", "images": ["images/Shaft_00775.png", "detail_png/Shaft_00775_length.png", "detail_png/Shaft_00775_diam.png", "detail_png/Shaft_00775_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.4 mm and length at least 228.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.4 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.9 mm over length 6.0 mm (from Z=0.0 to Z=162.2).\n10. Finish turn diameter Ø62.5 mm over length 27.0 mm (from Z=0.0 to Z=156.2).\n11. Finish turn diameter Ø46.7 mm over length 44.5 mm (from Z=0.0 to Z=129.2).\n12. Finish turn diameter Ø40.8 mm over length 47.4 mm (from Z=0.0 to Z=84.7).\n13. Finish turn diameter Ø30.0 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03911", "images": ["images/Shaft_03911.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.8 mm and length at least 236.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.8 mm over length 58.7 mm (from Z=0.0 to Z=196.0).\n10. Finish turn diameter Ø47.7 mm over length 81.2 mm (from Z=0.0 to Z=137.3).\n11. Finish turn diameter Ø38.3 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04372", "images": ["images/Shaft_04372.png", "detail_png/Shaft_04372_length.png", "detail_png/Shaft_04372_diam.png", "detail_png/Shaft_04372_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.9 mm and length at least 94.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.6 mm over length 24.1 mm (from Z=0.0 to Z=71.0).\n9. Finish turn diameter Ø30.0 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00882", "images": ["images/Shaft_00882.png", "detail_png/Shaft_00882_length.png", "detail_png/Shaft_00882_diam.png", "detail_png/Shaft_00882_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.6 mm and length at least 263.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.4 mm over length 135.5 mm (from Z=0.0 to Z=181.8).\n10. Finish turn diameter Ø38.8 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02457", "images": ["images/Shaft_02457.png", "detail_png/Shaft_02457_length.png", "detail_png/Shaft_02457_diam.png", "detail_png/Shaft_02457_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.8 mm and length at least 308.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 114.0 mm (from Z=0.0 to Z=114.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.0 mm over length 32.1 mm (from Z=0.0 to Z=189.9).\n10. Finish turn diameter Ø38.7 mm over length 25.1 mm (from Z=0.0 to Z=157.8).\n11. Finish turn diameter Ø30.0 mm over length 132.7 mm (from Z=0.0 to Z=132.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04454", "images": ["images/Shaft_04454.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.9 mm and length at least 135.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.9 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 27.5 mm (from Z=0.0 to Z=119.2).\n10. Finish turn diameter Ø30.0 mm over length 91.7 mm (from Z=0.0 to Z=91.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03625", "images": ["images/Shaft_03625.png", "detail_png/Shaft_03625_length.png", "detail_png/Shaft_03625_diam.png", "detail_png/Shaft_03625_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 107.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 92.9 mm (from Z=0.0 to Z=92.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.6 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03637", "images": ["images/Shaft_03637.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.4 mm and length at least 172.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 12.7 mm (from Z=0.0 to Z=146.2).\n10. Finish turn diameter Ø30.0 mm over length 133.5 mm (from Z=0.0 to Z=133.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04408", "images": ["images/Shaft_04408.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.6 mm and length at least 90.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.5 mm over length 24.0 mm (from Z=0.0 to Z=64.9).\n9. Finish turn diameter Ø38.6 mm over length 20.3 mm (from Z=0.0 to Z=40.9).\n10. Finish turn diameter Ø30.0 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03071", "images": ["images/Shaft_03071.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.0 mm and length at least 276.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.0 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 50.4 mm (from Z=0.0 to Z=232.5).\n10. Finish turn diameter Ø39.8 mm over length 92.3 mm (from Z=0.0 to Z=182.1).\n11. Finish turn diameter Ø30.0 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04669", "images": ["images/Shaft_04669.png", "detail_png/Shaft_04669_length.png", "detail_png/Shaft_04669_diam.png", "detail_png/Shaft_04669_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.9 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01090", "images": ["images/Shaft_01090.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.9 mm and length at least 108.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.6 mm over length 22.2 mm (from Z=0.0 to Z=82.3).\n9. Finish turn diameter Ø63.2 mm over length 26.7 mm (from Z=0.0 to Z=60.1).\n10. Finish turn diameter Ø53.9 mm over length 6.7 mm (from Z=0.0 to Z=33.4).\n11. Finish turn diameter Ø50.4 mm over length 21.7 mm (from Z=0.0 to Z=26.7).\n12. Finish turn diameter Ø34.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00780", "images": ["images/Shaft_00780.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.9 mm and length at least 216.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.4 mm over length 9.4 mm (from Z=0.0 to Z=196.7).\n10. Finish turn diameter Ø53.9 mm over length 42.3 mm (from Z=0.0 to Z=187.3).\n11. Finish turn diameter Ø47.3 mm over length 74.8 mm (from Z=0.0 to Z=145.0).\n12. Finish turn diameter Ø30.0 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00832", "images": ["images/Shaft_00832.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 217.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 157.2 mm (from Z=0.0 to Z=157.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.2 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03012", "images": ["images/Shaft_03012.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.4 mm and length at least 205.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.0 mm over length 41.9 mm (from Z=0.0 to Z=132.1).\n10. Finish turn diameter Ø42.1 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02962", "images": ["images/Shaft_02962.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.2 mm and length at least 161.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.3 mm over length 12.0 mm (from Z=0.0 to Z=121.6).\n9. Finish turn diameter Ø42.4 mm over length 7.0 mm (from Z=0.0 to Z=109.6).\n10. Finish turn diameter Ø36.4 mm over length 38.5 mm (from Z=0.0 to Z=102.6).\n11. Finish turn diameter Ø30.0 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03648", "images": ["images/Shaft_03648.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.6 mm and length at least 202.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.7 mm over length 44.6 mm (from Z=0.0 to Z=177.2).\n10. Finish turn diameter Ø30.1 mm over length 15.1 mm (from Z=0.0 to Z=132.6).\n11. Finish turn diameter Ø30.0 mm over length 117.5 mm (from Z=0.0 to Z=117.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02024", "images": ["images/Shaft_02024.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 324.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 209.0 mm (from Z=0.0 to Z=209.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.4 mm over length 110.8 mm (from Z=0.0 to Z=110.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02759", "images": ["images/Shaft_02759.png", "detail_png/Shaft_02759_length.png", "detail_png/Shaft_02759_diam.png", "detail_png/Shaft_02759_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.9 mm and length at least 284.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.8 mm over length 46.0 mm (from Z=0.0 to Z=236.8).\n10. Finish turn diameter Ø30.0 mm over length 190.8 mm (from Z=0.0 to Z=190.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01858", "images": ["images/Shaft_01858.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 247.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 181.0 mm (from Z=0.0 to Z=181.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04728", "images": ["images/Shaft_04728.png", "detail_png/Shaft_04728_length.png", "detail_png/Shaft_04728_diam.png", "detail_png/Shaft_04728_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.2 mm and length at least 164.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 13.6 mm (from Z=0.0 to Z=120.4).\n9. Finish turn diameter Ø41.6 mm over length 106.8 mm (from Z=0.0 to Z=106.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03683", "images": ["images/Shaft_03683.png", "detail_png/Shaft_03683_length.png", "detail_png/Shaft_03683_diam.png", "detail_png/Shaft_03683_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.7 mm and length at least 307.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 257.4 mm (from Z=0.0 to Z=257.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03724", "images": ["images/Shaft_03724.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.2 mm and length at least 108.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 26.7 mm (from Z=0.0 to Z=26.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.4 mm over length 5.0 mm (from Z=0.0 to Z=76.6).\n9. Finish turn diameter Ø53.9 mm over length 8.8 mm (from Z=0.0 to Z=71.6).\n10. Finish turn diameter Ø48.3 mm over length 25.0 mm (from Z=0.0 to Z=62.8).\n11. Finish turn diameter Ø30.0 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00480", "images": ["images/Shaft_00480.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.0 mm and length at least 225.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 73.8 mm (from Z=0.0 to Z=166.6).\n10. Finish turn diameter Ø30.0 mm over length 92.8 mm (from Z=0.0 to Z=92.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04047", "images": ["images/Shaft_04047.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.1 mm and length at least 210.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 71.0 mm (from Z=0.0 to Z=186.7).\n10. Finish turn diameter Ø54.3 mm over length 58.0 mm (from Z=0.0 to Z=115.7).\n11. Finish turn diameter Ø47.8 mm over length 16.7 mm (from Z=0.0 to Z=57.7).\n12. Finish turn diameter Ø31.0 mm over length 22.0 mm (from Z=0.0 to Z=41.0).\n13. Finish turn diameter Ø30.0 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00696", "images": ["images/Shaft_00696.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.3 mm and length at least 173.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.5 mm over length 28.4 mm (from Z=0.0 to Z=148.2).\n10. Finish turn diameter Ø30.0 mm over length 119.8 mm (from Z=0.0 to Z=119.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01507", "images": ["images/Shaft_01507.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 231.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 179.7 mm (from Z=0.0 to Z=179.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.4 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02954", "images": ["images/Shaft_02954.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.9 mm and length at least 170.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 51.1 mm (from Z=0.0 to Z=95.7).\n9. Finish turn diameter Ø34.2 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00611", "images": ["images/Shaft_00611.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.9 mm and length at least 153.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 56.8 mm (from Z=0.0 to Z=56.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 19.2 mm (from Z=0.0 to Z=92.1).\n9. Finish turn diameter Ø30.0 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04826", "images": ["images/Shaft_04826.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.3 mm and length at least 272.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 72.7 mm (from Z=0.0 to Z=72.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.1 mm over length 18.4 mm (from Z=0.0 to Z=195.1).\n10. Finish turn diameter Ø30.0 mm over length 176.7 mm (from Z=0.0 to Z=176.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03517", "images": ["images/Shaft_03517.png", "detail_png/Shaft_03517_length.png", "detail_png/Shaft_03517_diam.png", "detail_png/Shaft_03517_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.8 mm and length at least 152.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.6 mm over length 37.2 mm (from Z=0.0 to Z=105.1).\n9. Finish turn diameter Ø30.0 mm over length 67.9 mm (from Z=0.0 to Z=67.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01756", "images": ["images/Shaft_01756.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.3 mm and length at least 229.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 115.4 mm (from Z=0.0 to Z=115.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 43.9 mm (from Z=0.0 to Z=109.0).\n10. Finish turn diameter Ø40.1 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02531", "images": ["images/Shaft_02531.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.7 mm and length at least 211.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.7 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 157.6 mm (from Z=0.0 to Z=157.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04860", "images": ["images/Shaft_04860.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.9 mm and length at least 75.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.2 mm over length 5.3 mm (from Z=0.0 to Z=52.1).\n9. Finish turn diameter Ø49.6 mm over length 7.0 mm (from Z=0.0 to Z=46.8).\n10. Finish turn diameter Ø42.8 mm over length 26.6 mm (from Z=0.0 to Z=39.8).\n11. Finish turn diameter Ø30.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00203", "images": ["images/Shaft_00203.png", "detail_png/Shaft_00203_length.png", "detail_png/Shaft_00203_diam.png", "detail_png/Shaft_00203_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.4 mm and length at least 215.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.8 mm over length 65.4 mm (from Z=0.0 to Z=150.1).\n10. Finish turn diameter Ø30.0 mm over length 84.7 mm (from Z=0.0 to Z=84.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03478", "images": ["images/Shaft_03478.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 77.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.6 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02872", "images": ["images/Shaft_02872.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 242.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 205.3 mm (from Z=0.0 to Z=205.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.4 mm over length 32.1 mm (from Z=0.0 to Z=32.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01072", "images": ["images/Shaft_01072.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.0 mm and length at least 177.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.0 mm over length 24.3 mm (from Z=0.0 to Z=88.7).\n9. Finish turn diameter Ø30.0 mm over length 64.4 mm (from Z=0.0 to Z=64.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00812", "images": ["images/Shaft_00812.png", "detail_png/Shaft_00812_length.png", "detail_png/Shaft_00812_diam.png", "detail_png/Shaft_00812_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.0 mm and length at least 257.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.3 mm over length 53.2 mm (from Z=0.0 to Z=205.6).\n10. Finish turn diameter Ø58.2 mm over length 42.5 mm (from Z=0.0 to Z=152.4).\n11. Finish turn diameter Ø40.2 mm over length 63.3 mm (from Z=0.0 to Z=109.9).\n12. Finish turn diameter Ø30.0 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03701", "images": ["images/Shaft_03701.png", "detail_png/Shaft_03701_length.png", "detail_png/Shaft_03701_diam.png", "detail_png/Shaft_03701_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.6 mm and length at least 99.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.6 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.1 mm over length 18.3 mm (from Z=0.0 to Z=69.8).\n9. Finish turn diameter Ø30.0 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00364", "images": ["images/Shaft_00364.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 290.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 220.6 mm (from Z=0.0 to Z=220.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.1 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04744", "images": ["images/Shaft_04744.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.1 mm and length at least 235.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.1 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 124.7 mm (from Z=0.0 to Z=209.0).\n10. Finish turn diameter Ø40.2 mm over length 69.7 mm (from Z=0.0 to Z=84.3).\n11. Finish turn diameter Ø30.0 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04518", "images": ["images/Shaft_04518.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.8 mm and length at least 204.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.4 mm over length 25.0 mm (from Z=0.0 to Z=145.1).\n10. Finish turn diameter Ø42.7 mm over length 28.8 mm (from Z=0.0 to Z=120.1).\n11. Finish turn diameter Ø30.3 mm over length 38.2 mm (from Z=0.0 to Z=91.3).\n12. Finish turn diameter Ø30.0 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02506", "images": ["images/Shaft_02506.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.2 mm and length at least 148.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 69.2 mm (from Z=0.0 to Z=101.9).\n9. Finish turn diameter Ø49.6 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02650", "images": ["images/Shaft_02650.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.6 mm and length at least 126.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.2 mm over length 19.6 mm (from Z=0.0 to Z=107.1).\n9. Finish turn diameter Ø38.8 mm over length 28.9 mm (from Z=0.0 to Z=87.5).\n10. Finish turn diameter Ø33.2 mm over length 10.3 mm (from Z=0.0 to Z=58.6).\n11. Finish turn diameter Ø30.0 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02287", "images": ["images/Shaft_02287.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.6 mm and length at least 106.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.8 mm over length 13.4 mm (from Z=0.0 to Z=83.7).\n9. Finish turn diameter Ø30.0 mm over length 70.3 mm (from Z=0.0 to Z=70.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00094", "images": ["images/Shaft_00094.png", "detail_png/Shaft_00094_length.png", "detail_png/Shaft_00094_diam.png", "detail_png/Shaft_00094_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.5 mm and length at least 263.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.5 mm over length 63.3 mm (from Z=0.0 to Z=63.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 76.3 mm (from Z=0.0 to Z=195.1).\n10. Finish turn diameter Ø53.9 mm over length 72.8 mm (from Z=0.0 to Z=118.8).\n11. Finish turn diameter Ø36.0 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00084", "images": ["images/Shaft_00084.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 78.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.3 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03811", "images": ["images/Shaft_03811.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.4 mm and length at least 213.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.3 mm over length 45.7 mm (from Z=0.0 to Z=190.6).\n10. Finish turn diameter Ø43.5 mm over length 32.3 mm (from Z=0.0 to Z=144.9).\n11. Finish turn diameter Ø34.6 mm over length 60.6 mm (from Z=0.0 to Z=112.6).\n12. Finish turn diameter Ø30.0 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04912", "images": ["images/Shaft_04912.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.8 mm and length at least 271.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 78.0 mm (from Z=0.0 to Z=78.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.4 mm over length 97.2 mm (from Z=0.0 to Z=188.8).\n10. Finish turn diameter Ø51.8 mm over length 91.6 mm (from Z=0.0 to Z=91.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01545", "images": ["images/Shaft_01545.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.7 mm and length at least 162.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 7.6 mm (from Z=0.0 to Z=7.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.0 mm over length 53.6 mm (from Z=0.0 to Z=150.0).\n9. Finish turn diameter Ø32.2 mm over length 79.4 mm (from Z=0.0 to Z=96.4).\n10. Finish turn diameter Ø30.0 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01611", "images": ["images/Shaft_01611.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.4 mm and length at least 195.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.7 mm over length 43.4 mm (from Z=0.0 to Z=110.2).\n10. Finish turn diameter Ø30.0 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00745", "images": ["images/Shaft_00745.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.9 mm and length at least 194.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 9.3 mm (from Z=0.0 to Z=9.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.5 mm over length 54.1 mm (from Z=0.0 to Z=180.2).\n9. Finish turn diameter Ø41.4 mm over length 54.8 mm (from Z=0.0 to Z=126.1).\n10. Finish turn diameter Ø30.0 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03499", "images": ["images/Shaft_03499.png", "detail_png/Shaft_03499_length.png", "detail_png/Shaft_03499_diam.png", "detail_png/Shaft_03499_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.4 mm and length at least 78.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.4 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 22.0 mm (from Z=0.0 to Z=57.6).\n9. Finish turn diameter Ø38.4 mm over length 5.0 mm (from Z=0.0 to Z=35.6).\n10. Finish turn diameter Ø30.0 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03223", "images": ["images/Shaft_03223.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.8 mm and length at least 233.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.0 mm over length 91.7 mm (from Z=0.0 to Z=195.7).\n10. Finish turn diameter Ø40.3 mm over length 104.0 mm (from Z=0.0 to Z=104.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00345", "images": ["images/Shaft_00345.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.1 mm and length at least 85.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.1 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 29.9 mm (from Z=0.0 to Z=70.2).\n9. Finish turn diameter Ø30.0 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00813", "images": ["images/Shaft_00813.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.1 mm and length at least 217.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.9 mm (from Z=0.0 to Z=170.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03568", "images": ["images/Shaft_03568.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.5 mm and length at least 295.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 119.0 mm (from Z=0.0 to Z=119.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.9 mm over length 67.0 mm (from Z=0.0 to Z=171.1).\n10. Finish turn diameter Ø50.2 mm over length 63.3 mm (from Z=0.0 to Z=104.1).\n11. Finish turn diameter Ø39.7 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01341", "images": ["images/Shaft_01341.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.4 mm and length at least 188.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.8 mm over length 55.0 mm (from Z=0.0 to Z=128.5).\n9. Finish turn diameter Ø30.0 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04456", "images": ["images/Shaft_04456.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.3 mm and length at least 92.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 66.1 mm (from Z=0.0 to Z=66.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02815", "images": ["images/Shaft_02815.png", "detail_png/Shaft_02815_length.png", "detail_png/Shaft_02815_diam.png", "detail_png/Shaft_02815_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.5 mm and length at least 135.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.1 mm over length 17.5 mm (from Z=0.0 to Z=107.9).\n9. Finish turn diameter Ø44.7 mm over length 29.5 mm (from Z=0.0 to Z=90.4).\n10. Finish turn diameter Ø36.1 mm over length 16.9 mm (from Z=0.0 to Z=60.9).\n11. Finish turn diameter Ø30.0 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00710", "images": ["images/Shaft_00710.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.5 mm and length at least 215.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.5 mm over length 34.9 mm (from Z=0.0 to Z=34.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 33.6 mm (from Z=0.0 to Z=175.3).\n10. Finish turn diameter Ø35.4 mm over length 40.8 mm (from Z=0.0 to Z=141.7).\n11. Finish turn diameter Ø30.7 mm over length 100.9 mm (from Z=0.0 to Z=100.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01067", "images": ["images/Shaft_01067.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.1 mm and length at least 161.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.6 mm (from Z=0.0 to Z=111.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00546", "images": ["images/Shaft_00546.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 153.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.1 mm over length 34.6 mm (from Z=0.0 to Z=102.8).\n9. Finish turn diameter Ø30.0 mm over length 68.2 mm (from Z=0.0 to Z=68.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04308", "images": ["images/Shaft_04308.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.8 mm and length at least 240.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.8 mm over length 69.6 mm (from Z=0.0 to Z=223.9).\n10. Finish turn diameter Ø50.1 mm over length 81.0 mm (from Z=0.0 to Z=154.3).\n11. Finish turn diameter Ø37.1 mm over length 57.3 mm (from Z=0.0 to Z=73.3).\n12. Finish turn diameter Ø30.0 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04652", "images": ["images/Shaft_04652.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.6 mm and length at least 289.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.1 mm over length 20.2 mm (from Z=0.0 to Z=241.1).\n10. Finish turn diameter Ø30.0 mm over length 220.9 mm (from Z=0.0 to Z=220.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04281", "images": ["images/Shaft_04281.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.3 mm and length at least 226.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.3 mm over length 115.4 mm (from Z=0.0 to Z=177.5).\n10. Finish turn diameter Ø43.5 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03180", "images": ["images/Shaft_03180.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 71.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.3 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04573", "images": ["images/Shaft_04573.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.1 mm and length at least 223.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.6 mm over length 35.3 mm (from Z=0.0 to Z=146.3).\n10. Finish turn diameter Ø43.1 mm over length 40.5 mm (from Z=0.0 to Z=111.0).\n11. Finish turn diameter Ø33.2 mm over length 35.2 mm (from Z=0.0 to Z=70.5).\n12. Finish turn diameter Ø30.0 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02433", "images": ["images/Shaft_02433.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.3 mm and length at least 324.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 85.0 mm (from Z=0.0 to Z=85.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 234.3 mm (from Z=0.0 to Z=234.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00532", "images": ["images/Shaft_00532.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.5 mm and length at least 79.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.0 mm over length 19.5 mm (from Z=0.0 to Z=56.9).\n9. Finish turn diameter Ø30.0 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02659", "images": ["images/Shaft_02659.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.0 mm and length at least 273.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 29.6 mm (from Z=0.0 to Z=226.8).\n10. Finish turn diameter Ø52.8 mm over length 85.1 mm (from Z=0.0 to Z=197.2).\n11. Finish turn diameter Ø44.0 mm over length 57.5 mm (from Z=0.0 to Z=112.1).\n12. Finish turn diameter Ø30.0 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03721", "images": ["images/Shaft_03721.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.5 mm and length at least 317.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.5 mm over length 116.3 mm (from Z=0.0 to Z=116.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 196.6 mm (from Z=0.0 to Z=196.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04472", "images": ["images/Shaft_04472.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 302.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 229.4 mm (from Z=0.0 to Z=229.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.7 mm over length 68.2 mm (from Z=0.0 to Z=68.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01022", "images": ["images/Shaft_01022.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.5 mm and length at least 68.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.5 mm over length 7.7 mm (from Z=0.0 to Z=7.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.9 mm over length 8.2 mm (from Z=0.0 to Z=55.6).\n9. Finish turn diameter Ø30.0 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00646", "images": ["images/Shaft_00646.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.3 mm and length at least 162.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.8 mm over length 15.4 mm (from Z=0.0 to Z=111.3).\n9. Finish turn diameter Ø50.5 mm over length 45.9 mm (from Z=0.0 to Z=95.9).\n10. Finish turn diameter Ø38.4 mm over length 13.1 mm (from Z=0.0 to Z=50.0).\n11. Finish turn diameter Ø30.0 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00453", "images": ["images/Shaft_00453.png", "detail_png/Shaft_00453_length.png", "detail_png/Shaft_00453_diam.png", "detail_png/Shaft_00453_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 103.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.3 mm (from Z=0.0 to Z=85.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.3 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03524", "images": ["images/Shaft_03524.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.3 mm and length at least 250.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 140.6 mm (from Z=0.0 to Z=140.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02358", "images": ["images/Shaft_02358.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.9 mm and length at least 123.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.9 mm over length 47.5 mm (from Z=0.0 to Z=85.2).\n9. Finish turn diameter Ø30.0 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03327", "images": ["images/Shaft_03327.png", "detail_png/Shaft_03327_length.png", "detail_png/Shaft_03327_diam.png", "detail_png/Shaft_03327_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.9 mm and length at least 246.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.2 mm over length 23.8 mm (from Z=0.0 to Z=176.2).\n10. Finish turn diameter Ø37.1 mm over length 32.6 mm (from Z=0.0 to Z=152.4).\n11. Finish turn diameter Ø30.0 mm over length 119.8 mm (from Z=0.0 to Z=119.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01251", "images": ["images/Shaft_01251.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.2 mm and length at least 142.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.3 mm over length 48.7 mm (from Z=0.0 to Z=90.3).\n9. Finish turn diameter Ø30.0 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03434", "images": ["images/Shaft_03434.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.8 mm and length at least 307.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.8 mm over length 70.5 mm (from Z=0.0 to Z=70.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 231.7 mm (from Z=0.0 to Z=231.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03260", "images": ["images/Shaft_03260.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.0 mm and length at least 138.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.0 mm over length 37.5 mm (from Z=0.0 to Z=37.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.9 mm (from Z=0.0 to Z=95.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01641", "images": ["images/Shaft_01641.png", "detail_png/Shaft_01641_length.png", "detail_png/Shaft_01641_diam.png", "detail_png/Shaft_01641_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.6 mm and length at least 244.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.6 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.1 mm over length 31.2 mm (from Z=0.0 to Z=218.7).\n10. Finish turn diameter Ø50.8 mm over length 62.0 mm (from Z=0.0 to Z=187.5).\n11. Finish turn diameter Ø38.8 mm over length 125.5 mm (from Z=0.0 to Z=125.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04988", "images": ["images/Shaft_04988.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.3 mm and length at least 213.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.2 mm over length 65.8 mm (from Z=0.0 to Z=151.9).\n10. Finish turn diameter Ø34.0 mm over length 52.1 mm (from Z=0.0 to Z=86.1).\n11. Finish turn diameter Ø30.0 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00557", "images": ["images/Shaft_00557.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.7 mm and length at least 275.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 97.8 mm (from Z=0.0 to Z=97.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 172.9 mm (from Z=0.0 to Z=172.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04129", "images": ["images/Shaft_04129.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.8 mm and length at least 306.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 159.7 mm (from Z=0.0 to Z=159.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.1 mm over length 51.9 mm (from Z=0.0 to Z=141.5).\n10. Finish turn diameter Ø56.2 mm over length 89.6 mm (from Z=0.0 to Z=89.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01816", "images": ["images/Shaft_01816.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.9 mm and length at least 94.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 10.9 mm (from Z=0.0 to Z=56.7).\n9. Finish turn diameter Ø30.0 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02581", "images": ["images/Shaft_02581.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 119.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.3 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00752", "images": ["images/Shaft_00752.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.7 mm and length at least 112.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.7 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.2 mm over length 40.6 mm (from Z=0.0 to Z=61.9).\n9. Finish turn diameter Ø54.2 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03005", "images": ["images/Shaft_03005.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 81.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 69.3 mm (from Z=0.0 to Z=69.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.3 mm over length 7.6 mm (from Z=0.0 to Z=7.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02627", "images": ["images/Shaft_02627.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.7 mm and length at least 140.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.2 mm over length 5.0 mm (from Z=0.0 to Z=105.6).\n9. Finish turn diameter Ø40.1 mm over length 26.2 mm (from Z=0.0 to Z=100.6).\n10. Finish turn diameter Ø30.0 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00213", "images": ["images/Shaft_00213.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.0 mm and length at least 308.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 69.1 mm (from Z=0.0 to Z=292.3).\n10. Finish turn diameter Ø38.3 mm over length 64.1 mm (from Z=0.0 to Z=223.2).\n11. Finish turn diameter Ø30.2 mm over length 93.3 mm (from Z=0.0 to Z=159.1).\n12. Finish turn diameter Ø30.0 mm over length 65.8 mm (from Z=0.0 to Z=65.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00112", "images": ["images/Shaft_00112.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.8 mm and length at least 156.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 55.9 mm (from Z=0.0 to Z=131.8).\n9. Finish turn diameter Ø30.0 mm over length 75.9 mm (from Z=0.0 to Z=75.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02847", "images": ["images/Shaft_02847.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.5 mm and length at least 321.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 150.7 mm (from Z=0.0 to Z=300.6).\n10. Finish turn diameter Ø40.2 mm over length 149.9 mm (from Z=0.0 to Z=149.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03218", "images": ["images/Shaft_03218.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.9 mm and length at least 198.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.3 mm (from Z=0.0 to Z=148.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01338", "images": ["images/Shaft_01338.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.2 mm and length at least 236.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.2 mm over length 15.6 mm (from Z=0.0 to Z=15.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 84.6 mm (from Z=0.0 to Z=215.8).\n10. Finish turn diameter Ø30.0 mm over length 131.2 mm (from Z=0.0 to Z=131.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04338", "images": ["images/Shaft_04338.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.8 mm and length at least 238.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.9 mm over length 88.1 mm (from Z=0.0 to Z=214.3).\n10. Finish turn diameter Ø32.7 mm over length 64.6 mm (from Z=0.0 to Z=126.2).\n11. Finish turn diameter Ø30.0 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02986", "images": ["images/Shaft_02986.png", "detail_png/Shaft_02986_length.png", "detail_png/Shaft_02986_diam.png", "detail_png/Shaft_02986_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.6 mm and length at least 302.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.6 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 257.2 mm (from Z=0.0 to Z=257.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02466", "images": ["images/Shaft_02466.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.2 mm and length at least 274.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.3 mm over length 18.3 mm (from Z=0.0 to Z=241.8).\n10. Finish turn diameter Ø42.8 mm over length 68.6 mm (from Z=0.0 to Z=223.5).\n11. Finish turn diameter Ø38.0 mm over length 9.2 mm (from Z=0.0 to Z=154.9).\n12. Finish turn diameter Ø30.0 mm over length 145.7 mm (from Z=0.0 to Z=145.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01723", "images": ["images/Shaft_01723.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.2 mm and length at least 110.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.6 mm over length 51.8 mm (from Z=0.0 to Z=65.9).\n9. Finish turn diameter Ø30.0 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01441", "images": ["images/Shaft_01441.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.9 mm and length at least 240.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.5 mm (from Z=0.0 to Z=190.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03611", "images": ["images/Shaft_03611.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.0 mm and length at least 322.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.3 mm over length 109.3 mm (from Z=0.0 to Z=293.3).\n10. Finish turn diameter Ø60.6 mm over length 21.0 mm (from Z=0.0 to Z=184.0).\n11. Finish turn diameter Ø41.5 mm over length 65.2 mm (from Z=0.0 to Z=163.0).\n12. Finish turn diameter Ø30.0 mm over length 97.8 mm (from Z=0.0 to Z=97.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02073", "images": ["images/Shaft_02073.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 302.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 191.9 mm (from Z=0.0 to Z=191.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.7 mm over length 105.6 mm (from Z=0.0 to Z=105.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01068", "images": ["images/Shaft_01068.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.5 mm and length at least 155.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.5 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 121.6 mm (from Z=0.0 to Z=121.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02860", "images": ["images/Shaft_02860.png", "detail_png/Shaft_02860_length.png", "detail_png/Shaft_02860_diam.png", "detail_png/Shaft_02860_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.3 mm and length at least 275.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.6 mm (from Z=0.0 to Z=229.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03874", "images": ["images/Shaft_03874.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.2 mm and length at least 104.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.6 mm over length 15.8 mm (from Z=0.0 to Z=71.1).\n9. Finish turn diameter Ø50.1 mm over length 28.1 mm (from Z=0.0 to Z=55.3).\n10. Finish turn diameter Ø44.7 mm over length 10.4 mm (from Z=0.0 to Z=27.2).\n11. Finish turn diameter Ø32.4 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00411", "images": ["images/Shaft_00411.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.0 mm and length at least 106.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.7 mm over length 23.6 mm (from Z=0.0 to Z=75.4).\n9. Finish turn diameter Ø55.9 mm over length 5.0 mm (from Z=0.0 to Z=51.8).\n10. Finish turn diameter Ø39.3 mm over length 22.8 mm (from Z=0.0 to Z=46.8).\n11. Finish turn diameter Ø30.0 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03296", "images": ["images/Shaft_03296.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.8 mm and length at least 277.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.6 mm over length 41.6 mm (from Z=0.0 to Z=234.6).\n10. Finish turn diameter Ø30.0 mm over length 193.0 mm (from Z=0.0 to Z=193.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02938", "images": ["images/Shaft_02938.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.8 mm and length at least 235.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 66.2 mm (from Z=0.0 to Z=66.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.2 mm over length 18.4 mm (from Z=0.0 to Z=164.6).\n10. Finish turn diameter Ø57.0 mm over length 60.2 mm (from Z=0.0 to Z=146.2).\n11. Finish turn diameter Ø41.4 mm over length 86.0 mm (from Z=0.0 to Z=86.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01362", "images": ["images/Shaft_01362.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 181.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 122.3 mm (from Z=0.0 to Z=122.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.1 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01691", "images": ["images/Shaft_01691.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.6 mm and length at least 99.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.6 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03018", "images": ["images/Shaft_03018.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 201.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.0 mm (from Z=0.0 to Z=146.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01929", "images": ["images/Shaft_01929.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.4 mm and length at least 307.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.4 mm over length 106.5 mm (from Z=0.0 to Z=106.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.6 mm over length 57.4 mm (from Z=0.0 to Z=196.3).\n10. Finish turn diameter Ø41.0 mm over length 98.5 mm (from Z=0.0 to Z=138.9).\n11. Finish turn diameter Ø30.0 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03708", "images": ["images/Shaft_03708.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.0 mm and length at least 161.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.0 mm over length 51.9 mm (from Z=0.0 to Z=149.0).\n9. Finish turn diameter Ø57.3 mm over length 46.4 mm (from Z=0.0 to Z=97.1).\n10. Finish turn diameter Ø41.5 mm over length 16.5 mm (from Z=0.0 to Z=50.7).\n11. Finish turn diameter Ø33.8 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04193", "images": ["images/Shaft_04193.png", "detail_png/Shaft_04193_length.png", "detail_png/Shaft_04193_diam.png", "detail_png/Shaft_04193_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.8 mm and length at least 206.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 53.7 mm (from Z=0.0 to Z=143.4).\n10. Finish turn diameter Ø33.4 mm over length 33.5 mm (from Z=0.0 to Z=89.7).\n11. Finish turn diameter Ø30.0 mm over length 56.2 mm (from Z=0.0 to Z=56.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01122", "images": ["images/Shaft_01122.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.9 mm and length at least 113.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 8.7 mm (from Z=0.0 to Z=8.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.3 mm over length 24.5 mm (from Z=0.0 to Z=100.0).\n9. Finish turn diameter Ø56.2 mm over length 10.3 mm (from Z=0.0 to Z=75.5).\n10. Finish turn diameter Ø53.1 mm over length 20.8 mm (from Z=0.0 to Z=65.2).\n11. Finish turn diameter Ø41.7 mm over length 39.4 mm (from Z=0.0 to Z=44.4).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00138", "images": ["images/Shaft_00138.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.5 mm and length at least 214.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.2 mm over length 43.0 mm (from Z=0.0 to Z=170.6).\n10. Finish turn diameter Ø30.0 mm over length 127.6 mm (from Z=0.0 to Z=127.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01664", "images": ["images/Shaft_01664.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 148.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 93.8 mm (from Z=0.0 to Z=93.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.4 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03141", "images": ["images/Shaft_03141.png", "detail_png/Shaft_03141_length.png", "detail_png/Shaft_03141_diam.png", "detail_png/Shaft_03141_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.0 mm and length at least 192.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.9 mm (from Z=0.0 to Z=166.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01299", "images": ["images/Shaft_01299.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.2 mm and length at least 266.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 19.8 mm (from Z=0.0 to Z=194.3).\n10. Finish turn diameter Ø30.0 mm over length 174.5 mm (from Z=0.0 to Z=174.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04538", "images": ["images/Shaft_04538.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.3 mm and length at least 221.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 86.3 mm (from Z=0.0 to Z=86.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 37.2 mm (from Z=0.0 to Z=129.7).\n10. Finish turn diameter Ø30.0 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04506", "images": ["images/Shaft_04506.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.2 mm and length at least 195.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 24.0 mm (from Z=0.0 to Z=145.8).\n10. Finish turn diameter Ø33.1 mm over length 38.5 mm (from Z=0.0 to Z=121.8).\n11. Finish turn diameter Ø30.0 mm over length 83.3 mm (from Z=0.0 to Z=83.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04117", "images": ["images/Shaft_04117.png", "detail_png/Shaft_04117_length.png", "detail_png/Shaft_04117_diam.png", "detail_png/Shaft_04117_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.3 mm and length at least 250.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.3 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.1 mm over length 94.3 mm (from Z=0.0 to Z=208.5).\n10. Finish turn diameter Ø30.0 mm over length 114.2 mm (from Z=0.0 to Z=114.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00861", "images": ["images/Shaft_00861.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.9 mm and length at least 150.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.1 mm over length 17.1 mm (from Z=0.0 to Z=78.6).\n9. Finish turn diameter Ø30.0 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01218", "images": ["images/Shaft_01218.png", "detail_png/Shaft_01218_length.png", "detail_png/Shaft_01218_diam.png", "detail_png/Shaft_01218_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.2 mm and length at least 156.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 5.8 mm (from Z=0.0 to Z=120.6).\n9. Finish turn diameter Ø46.8 mm over length 33.8 mm (from Z=0.0 to Z=114.8).\n10. Finish turn diameter Ø38.3 mm over length 14.7 mm (from Z=0.0 to Z=81.0).\n11. Finish turn diameter Ø31.8 mm over length 47.0 mm (from Z=0.0 to Z=66.3).\n12. Finish turn diameter Ø30.0 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00964", "images": ["images/Shaft_00964.png", "detail_png/Shaft_00964_length.png", "detail_png/Shaft_00964_diam.png", "detail_png/Shaft_00964_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 215.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 128.4 mm (from Z=0.0 to Z=128.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.1 mm over length 82.0 mm (from Z=0.0 to Z=82.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03110", "images": ["images/Shaft_03110.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.6 mm and length at least 279.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.6 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 66.7 mm (from Z=0.0 to Z=237.2).\n10. Finish turn diameter Ø30.0 mm over length 170.5 mm (from Z=0.0 to Z=170.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04894", "images": ["images/Shaft_04894.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.7 mm and length at least 96.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.1 mm over length 27.4 mm (from Z=0.0 to Z=54.5).\n9. Finish turn diameter Ø30.0 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01046", "images": ["images/Shaft_01046.png", "detail_png/Shaft_01046_length.png", "detail_png/Shaft_01046_diam.png", "detail_png/Shaft_01046_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.2 mm and length at least 67.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.2 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 11.0 mm (from Z=0.0 to Z=50.3).\n9. Finish turn diameter Ø44.8 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01609", "images": ["images/Shaft_01609.png", "detail_png/Shaft_01609_length.png", "detail_png/Shaft_01609_diam.png", "detail_png/Shaft_01609_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.5 mm and length at least 137.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 24.8 mm (from Z=0.0 to Z=113.6).\n9. Finish turn diameter Ø40.8 mm over length 20.9 mm (from Z=0.0 to Z=88.8).\n10. Finish turn diameter Ø30.0 mm over length 67.9 mm (from Z=0.0 to Z=67.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00032", "images": ["images/Shaft_00032.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.2 mm and length at least 95.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.2 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.5 mm over length 16.2 mm (from Z=0.0 to Z=66.4).\n9. Finish turn diameter Ø60.0 mm over length 18.3 mm (from Z=0.0 to Z=50.2).\n10. Finish turn diameter Ø51.1 mm over length 5.2 mm (from Z=0.0 to Z=31.9).\n11. Finish turn diameter Ø46.4 mm over length 26.7 mm (from Z=0.0 to Z=26.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01591", "images": ["images/Shaft_01591.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.3 mm and length at least 292.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 149.8 mm (from Z=0.0 to Z=221.9).\n10. Finish turn diameter Ø30.0 mm over length 72.1 mm (from Z=0.0 to Z=72.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03383", "images": ["images/Shaft_03383.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.8 mm and length at least 116.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 6.6 mm (from Z=0.0 to Z=92.4).\n9. Finish turn diameter Ø45.4 mm over length 35.7 mm (from Z=0.0 to Z=85.8).\n10. Finish turn diameter Ø30.0 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04380", "images": ["images/Shaft_04380.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.9 mm and length at least 111.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04127", "images": ["images/Shaft_04127.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.0 mm and length at least 158.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 35.6 mm (from Z=0.0 to Z=35.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.8 mm over length 68.0 mm (from Z=0.0 to Z=118.3).\n9. Finish turn diameter Ø30.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00499", "images": ["images/Shaft_00499.png", "detail_png/Shaft_00499_length.png", "detail_png/Shaft_00499_diam.png", "detail_png/Shaft_00499_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.7 mm and length at least 159.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 65.9 mm (from Z=0.0 to Z=65.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 16.9 mm (from Z=0.0 to Z=88.2).\n9. Finish turn diameter Ø33.7 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02806", "images": ["images/Shaft_02806.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.2 mm and length at least 73.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 8.7 mm (from Z=0.0 to Z=8.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.9 mm over length 13.1 mm (from Z=0.0 to Z=59.9).\n9. Finish turn diameter Ø31.5 mm over length 26.2 mm (from Z=0.0 to Z=46.8).\n10. Finish turn diameter Ø30.0 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04926", "images": ["images/Shaft_04926.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 156.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 77.0 mm (from Z=0.0 to Z=77.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.6 mm over length 74.9 mm (from Z=0.0 to Z=74.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04841", "images": ["images/Shaft_04841.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.1 mm and length at least 139.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 109.7 mm (from Z=0.0 to Z=109.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03738", "images": ["images/Shaft_03738.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.2 mm and length at least 103.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 93.5 mm (from Z=0.0 to Z=93.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01266", "images": ["images/Shaft_01266.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.6 mm and length at least 95.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 13.1 mm (from Z=0.0 to Z=68.6).\n9. Finish turn diameter Ø30.0 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01575", "images": ["images/Shaft_01575.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.7 mm and length at least 202.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 60.4 mm (from Z=0.0 to Z=169.6).\n10. Finish turn diameter Ø51.1 mm over length 61.8 mm (from Z=0.0 to Z=109.2).\n11. Finish turn diameter Ø37.2 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02263", "images": ["images/Shaft_02263.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.3 mm and length at least 323.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 296.0 mm (from Z=0.0 to Z=296.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04854", "images": ["images/Shaft_04854.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.7 mm and length at least 179.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.2 mm over length 41.7 mm (from Z=0.0 to Z=140.5).\n9. Finish turn diameter Ø35.1 mm over length 48.1 mm (from Z=0.0 to Z=98.8).\n10. Finish turn diameter Ø30.0 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00981", "images": ["images/Shaft_00981.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.4 mm and length at least 161.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.3 mm over length 28.1 mm (from Z=0.0 to Z=119.2).\n10. Finish turn diameter Ø30.0 mm over length 91.1 mm (from Z=0.0 to Z=91.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03217", "images": ["images/Shaft_03217.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.4 mm and length at least 196.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.7 mm (from Z=0.0 to Z=164.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03277", "images": ["images/Shaft_03277.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.4 mm and length at least 128.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.1 mm over length 19.9 mm (from Z=0.0 to Z=99.2).\n9. Finish turn diameter Ø35.8 mm over length 5.0 mm (from Z=0.0 to Z=79.3).\n10. Finish turn diameter Ø30.0 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04599", "images": ["images/Shaft_04599.png", "detail_png/Shaft_04599_length.png", "detail_png/Shaft_04599_diam.png", "detail_png/Shaft_04599_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.0 mm and length at least 297.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 79.9 mm (from Z=0.0 to Z=273.1).\n10. Finish turn diameter Ø31.4 mm over length 69.3 mm (from Z=0.0 to Z=193.2).\n11. Finish turn diameter Ø30.0 mm over length 123.9 mm (from Z=0.0 to Z=123.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02712", "images": ["images/Shaft_02712.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.5 mm and length at least 135.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.2 mm over length 34.1 mm (from Z=0.0 to Z=114.7).\n9. Finish turn diameter Ø48.9 mm over length 32.4 mm (from Z=0.0 to Z=80.6).\n10. Finish turn diameter Ø30.9 mm over length 28.2 mm (from Z=0.0 to Z=48.2).\n11. Finish turn diameter Ø30.0 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03028", "images": ["images/Shaft_03028.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 88.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.1 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03995", "images": ["images/Shaft_03995.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.0 mm and length at least 183.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 105.2 mm (from Z=0.0 to Z=105.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.5 mm over length 56.2 mm (from Z=0.0 to Z=73.6).\n9. Finish turn diameter Ø40.5 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02481", "images": ["images/Shaft_02481.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 161.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 139.8 mm (from Z=0.0 to Z=139.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.7 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02643", "images": ["images/Shaft_02643.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 283.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 135.6 mm (from Z=0.0 to Z=135.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.3 mm over length 143.1 mm (from Z=0.0 to Z=143.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04516", "images": ["images/Shaft_04516.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.7 mm and length at least 253.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.0 mm over length 44.9 mm (from Z=0.0 to Z=201.4).\n10. Finish turn diameter Ø30.0 mm over length 156.5 mm (from Z=0.0 to Z=156.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04570", "images": ["images/Shaft_04570.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.7 mm and length at least 106.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.2 mm over length 10.6 mm (from Z=0.0 to Z=83.0).\n9. Finish turn diameter Ø42.5 mm over length 18.7 mm (from Z=0.0 to Z=72.4).\n10. Finish turn diameter Ø30.0 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01506", "images": ["images/Shaft_01506.png", "detail_png/Shaft_01506_length.png", "detail_png/Shaft_01506_diam.png", "detail_png/Shaft_01506_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.3 mm and length at least 225.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 69.3 mm (from Z=0.0 to Z=177.5).\n10. Finish turn diameter Ø45.2 mm over length 57.5 mm (from Z=0.0 to Z=108.2).\n11. Finish turn diameter Ø31.6 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04512", "images": ["images/Shaft_04512.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.4 mm and length at least 261.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.4 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 159.7 mm (from Z=0.0 to Z=159.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03237", "images": ["images/Shaft_03237.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.1 mm and length at least 233.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.8 mm over length 12.7 mm (from Z=0.0 to Z=139.0).\n10. Finish turn diameter Ø30.0 mm over length 126.3 mm (from Z=0.0 to Z=126.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01486", "images": ["images/Shaft_01486.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.4 mm and length at least 261.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.4 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.8 mm over length 35.6 mm (from Z=0.0 to Z=212.3).\n10. Finish turn diameter Ø55.4 mm over length 64.2 mm (from Z=0.0 to Z=176.7).\n11. Finish turn diameter Ø49.8 mm over length 34.8 mm (from Z=0.0 to Z=112.5).\n12. Finish turn diameter Ø38.6 mm over length 77.7 mm (from Z=0.0 to Z=77.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00593", "images": ["images/Shaft_00593.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.1 mm and length at least 183.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.4 mm over length 65.9 mm (from Z=0.0 to Z=121.2).\n9. Finish turn diameter Ø30.0 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03442", "images": ["images/Shaft_03442.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.0 mm and length at least 134.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 74.9 mm (from Z=0.0 to Z=74.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.1 mm over length 7.5 mm (from Z=0.0 to Z=55.0).\n9. Finish turn diameter Ø30.0 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01009", "images": ["images/Shaft_01009.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 238.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 170.1 mm (from Z=0.0 to Z=170.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.0 mm over length 63.6 mm (from Z=0.0 to Z=63.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04962", "images": ["images/Shaft_04962.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 76.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.7 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01945", "images": ["images/Shaft_01945.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.0 mm and length at least 106.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.4 mm over length 33.9 mm (from Z=0.0 to Z=87.7).\n9. Finish turn diameter Ø30.0 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01735", "images": ["images/Shaft_01735.png", "detail_png/Shaft_01735_length.png", "detail_png/Shaft_01735_diam.png", "detail_png/Shaft_01735_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.9 mm and length at least 315.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.8 mm over length 19.0 mm (from Z=0.0 to Z=250.8).\n10. Finish turn diameter Ø30.0 mm over length 231.8 mm (from Z=0.0 to Z=231.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02235", "images": ["images/Shaft_02235.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.8 mm and length at least 196.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.8 mm over length 14.6 mm (from Z=0.0 to Z=182.1).\n10. Finish turn diameter Ø37.0 mm over length 52.2 mm (from Z=0.0 to Z=167.5).\n11. Finish turn diameter Ø30.0 mm over length 115.3 mm (from Z=0.0 to Z=115.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03586", "images": ["images/Shaft_03586.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.3 mm and length at least 85.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03540", "images": ["images/Shaft_03540.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.5 mm and length at least 305.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.8 mm over length 78.7 mm (from Z=0.0 to Z=262.7).\n10. Finish turn diameter Ø37.3 mm over length 82.9 mm (from Z=0.0 to Z=184.0).\n11. Finish turn diameter Ø30.0 mm over length 101.1 mm (from Z=0.0 to Z=101.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02865", "images": ["images/Shaft_02865.png", "detail_png/Shaft_02865_length.png", "detail_png/Shaft_02865_diam.png", "detail_png/Shaft_02865_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.2 mm and length at least 134.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.1 mm over length 40.0 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø34.4 mm over length 14.0 mm (from Z=0.0 to Z=45.8).\n10. Finish turn diameter Ø30.0 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01534", "images": ["images/Shaft_01534.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.3 mm and length at least 175.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.3 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.3 mm (from Z=0.0 to Z=81.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04018", "images": ["images/Shaft_04018.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.4 mm and length at least 240.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.1 mm over length 36.8 mm (from Z=0.0 to Z=196.9).\n10. Finish turn diameter Ø36.7 mm over length 38.5 mm (from Z=0.0 to Z=160.1).\n11. Finish turn diameter Ø30.0 mm over length 121.6 mm (from Z=0.0 to Z=121.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03428", "images": ["images/Shaft_03428.png", "detail_png/Shaft_03428_length.png", "detail_png/Shaft_03428_diam.png", "detail_png/Shaft_03428_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.5 mm and length at least 160.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.4 mm over length 20.3 mm (from Z=0.0 to Z=128.0).\n9. Finish turn diameter Ø41.4 mm over length 27.9 mm (from Z=0.0 to Z=107.7).\n10. Finish turn diameter Ø30.0 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04390", "images": ["images/Shaft_04390.png", "detail_png/Shaft_04390_length.png", "detail_png/Shaft_04390_diam.png", "detail_png/Shaft_04390_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.3 mm and length at least 318.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.0 mm over length 64.2 mm (from Z=0.0 to Z=260.6).\n10. Finish turn diameter Ø39.3 mm over length 51.8 mm (from Z=0.0 to Z=196.4).\n11. Finish turn diameter Ø30.0 mm over length 144.6 mm (from Z=0.0 to Z=144.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03554", "images": ["images/Shaft_03554.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.7 mm and length at least 72.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01041", "images": ["images/Shaft_01041.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.4 mm and length at least 209.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 153.2 mm (from Z=0.0 to Z=153.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01672", "images": ["images/Shaft_01672.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.6 mm and length at least 244.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.6 mm over length 68.6 mm (from Z=0.0 to Z=68.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.0 mm over length 81.1 mm (from Z=0.0 to Z=171.2).\n10. Finish turn diameter Ø30.0 mm over length 90.1 mm (from Z=0.0 to Z=90.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03552", "images": ["images/Shaft_03552.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 180.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.4 mm (from Z=0.0 to Z=147.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04664", "images": ["images/Shaft_04664.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.9 mm and length at least 73.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 31.9 mm (from Z=0.0 to Z=63.9).\n9. Finish turn diameter Ø55.8 mm over length 24.0 mm (from Z=0.0 to Z=32.0).\n10. Finish turn diameter Ø42.9 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03257", "images": ["images/Shaft_03257.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 228.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 180.9 mm (from Z=0.0 to Z=180.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.3 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00717", "images": ["images/Shaft_00717.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.5 mm and length at least 138.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.6 mm over length 22.6 mm (from Z=0.0 to Z=120.8).\n9. Finish turn diameter Ø50.0 mm over length 40.1 mm (from Z=0.0 to Z=98.2).\n10. Finish turn diameter Ø41.5 mm over length 43.2 mm (from Z=0.0 to Z=58.1).\n11. Finish turn diameter Ø30.0 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00437", "images": ["images/Shaft_00437.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 167.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 120.5 mm (from Z=0.0 to Z=120.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.7 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04937", "images": ["images/Shaft_04937.png", "detail_png/Shaft_04937_length.png", "detail_png/Shaft_04937_diam.png", "detail_png/Shaft_04937_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 97.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø28.2 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03695", "images": ["images/Shaft_03695.png", "detail_png/Shaft_03695_length.png", "detail_png/Shaft_03695_diam.png", "detail_png/Shaft_03695_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.3 mm and length at least 237.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.3 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.5 mm over length 11.1 mm (from Z=0.0 to Z=213.6).\n10. Finish turn diameter Ø34.9 mm over length 30.1 mm (from Z=0.0 to Z=202.5).\n11. Finish turn diameter Ø30.0 mm over length 172.4 mm (from Z=0.0 to Z=172.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01732", "images": ["images/Shaft_01732.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.6 mm and length at least 314.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.6 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.3 mm over length 39.9 mm (from Z=0.0 to Z=262.7).\n10. Finish turn diameter Ø54.6 mm over length 34.5 mm (from Z=0.0 to Z=222.8).\n11. Finish turn diameter Ø45.1 mm over length 78.7 mm (from Z=0.0 to Z=188.3).\n12. Finish turn diameter Ø32.4 mm over length 109.6 mm (from Z=0.0 to Z=109.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04754", "images": ["images/Shaft_04754.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.8 mm and length at least 305.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.0 mm over length 17.6 mm (from Z=0.0 to Z=207.5).\n10. Finish turn diameter Ø34.6 mm over length 80.3 mm (from Z=0.0 to Z=189.9).\n11. Finish turn diameter Ø30.0 mm over length 109.6 mm (from Z=0.0 to Z=109.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03047", "images": ["images/Shaft_03047.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.4 mm and length at least 81.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.4 mm over length 6.8 mm (from Z=0.0 to Z=6.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.3 mm (from Z=0.0 to Z=69.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04902", "images": ["images/Shaft_04902.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.0 mm and length at least 233.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.7 mm over length 31.4 mm (from Z=0.0 to Z=177.1).\n10. Finish turn diameter Ø55.9 mm over length 46.6 mm (from Z=0.0 to Z=145.7).\n11. Finish turn diameter Ø43.4 mm over length 54.2 mm (from Z=0.0 to Z=99.1).\n12. Finish turn diameter Ø34.2 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01597", "images": ["images/Shaft_01597.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.6 mm and length at least 184.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 25.7 mm (from Z=0.0 to Z=124.9).\n9. Finish turn diameter Ø46.3 mm over length 21.9 mm (from Z=0.0 to Z=99.2).\n10. Finish turn diameter Ø31.0 mm over length 32.6 mm (from Z=0.0 to Z=77.3).\n11. Finish turn diameter Ø30.0 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04638", "images": ["images/Shaft_04638.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.3 mm and length at least 81.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.3 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02393", "images": ["images/Shaft_02393.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.8 mm and length at least 191.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.8 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 152.1 mm (from Z=0.0 to Z=152.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01348", "images": ["images/Shaft_01348.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 177.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.4 mm (from Z=0.0 to Z=136.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.5 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03225", "images": ["images/Shaft_03225.png", "detail_png/Shaft_03225_length.png", "detail_png/Shaft_03225_diam.png", "detail_png/Shaft_03225_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.6 mm and length at least 117.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.8 mm over length 5.0 mm (from Z=0.0 to Z=94.6).\n9. Finish turn diameter Ø41.8 mm over length 22.1 mm (from Z=0.0 to Z=89.6).\n10. Finish turn diameter Ø37.2 mm over length 12.5 mm (from Z=0.0 to Z=67.5).\n11. Finish turn diameter Ø30.0 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03439", "images": ["images/Shaft_03439.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.3 mm and length at least 159.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 8.6 mm (from Z=0.0 to Z=138.6).\n9. Finish turn diameter Ø35.4 mm over length 24.2 mm (from Z=0.0 to Z=130.0).\n10. Finish turn diameter Ø31.9 mm over length 47.0 mm (from Z=0.0 to Z=105.8).\n11. Finish turn diameter Ø30.0 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02456", "images": ["images/Shaft_02456.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.7 mm and length at least 178.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.7 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 36.8 mm (from Z=0.0 to Z=144.9).\n10. Finish turn diameter Ø30.0 mm over length 108.1 mm (from Z=0.0 to Z=108.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00975", "images": ["images/Shaft_00975.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.4 mm and length at least 165.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.1 mm over length 42.9 mm (from Z=0.0 to Z=114.8).\n9. Finish turn diameter Ø54.7 mm over length 21.6 mm (from Z=0.0 to Z=71.9).\n10. Finish turn diameter Ø41.9 mm over length 25.6 mm (from Z=0.0 to Z=50.3).\n11. Finish turn diameter Ø36.2 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03574", "images": ["images/Shaft_03574.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 256.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 220.3 mm (from Z=0.0 to Z=220.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.3 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02033", "images": ["images/Shaft_02033.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.7 mm and length at least 186.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 30.8 mm (from Z=0.0 to Z=136.5).\n9. Finish turn diameter Ø45.8 mm over length 17.9 mm (from Z=0.0 to Z=105.7).\n10. Finish turn diameter Ø30.0 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01031", "images": ["images/Shaft_01031.png", "detail_png/Shaft_01031_length.png", "detail_png/Shaft_01031_diam.png", "detail_png/Shaft_01031_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.4 mm and length at least 272.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.1 mm over length 84.8 mm (from Z=0.0 to Z=222.6).\n10. Finish turn diameter Ø61.1 mm over length 54.0 mm (from Z=0.0 to Z=137.8).\n11. Finish turn diameter Ø50.4 mm over length 83.8 mm (from Z=0.0 to Z=83.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04115", "images": ["images/Shaft_04115.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.3 mm and length at least 253.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 117.6 mm (from Z=0.0 to Z=200.0).\n10. Finish turn diameter Ø53.7 mm over length 82.4 mm (from Z=0.0 to Z=82.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02377", "images": ["images/Shaft_02377.png", "detail_png/Shaft_02377_length.png", "detail_png/Shaft_02377_diam.png", "detail_png/Shaft_02377_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 185.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 140.3 mm (from Z=0.0 to Z=140.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.8 mm over length 40.0 mm (from Z=0.0 to Z=40.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02720", "images": ["images/Shaft_02720.png", "detail_png/Shaft_02720_length.png", "detail_png/Shaft_02720_diam.png", "detail_png/Shaft_02720_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 99.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.2 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02137", "images": ["images/Shaft_02137.png", "detail_png/Shaft_02137_length.png", "detail_png/Shaft_02137_diam.png", "detail_png/Shaft_02137_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.4 mm and length at least 278.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.0 mm over length 31.9 mm (from Z=0.0 to Z=191.3).\n10. Finish turn diameter Ø45.7 mm over length 52.2 mm (from Z=0.0 to Z=159.4).\n11. Finish turn diameter Ø30.0 mm over length 107.2 mm (from Z=0.0 to Z=107.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00494", "images": ["images/Shaft_00494.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.2 mm and length at least 283.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.0 mm over length 44.5 mm (from Z=0.0 to Z=214.3).\n10. Finish turn diameter Ø52.2 mm over length 15.6 mm (from Z=0.0 to Z=169.8).\n11. Finish turn diameter Ø35.7 mm over length 49.8 mm (from Z=0.0 to Z=154.2).\n12. Finish turn diameter Ø30.0 mm over length 104.4 mm (from Z=0.0 to Z=104.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02049", "images": ["images/Shaft_02049.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø56.3 mm and length at least 181.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.3 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.4 mm over length 33.2 mm (from Z=0.0 to Z=138.2).\n10. Finish turn diameter Ø30.0 mm over length 105.0 mm (from Z=0.0 to Z=105.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03008", "images": ["images/Shaft_03008.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.1 mm and length at least 74.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.1 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 5.0 mm (from Z=0.0 to Z=32.7).\n9. Finish turn diameter Ø56.4 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02338", "images": ["images/Shaft_02338.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.1 mm and length at least 283.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 243.7 mm (from Z=0.0 to Z=243.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04943", "images": ["images/Shaft_04943.png", "detail_png/Shaft_04943_length.png", "detail_png/Shaft_04943_diam.png", "detail_png/Shaft_04943_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.5 mm and length at least 212.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.5 mm over length 41.9 mm (from Z=0.0 to Z=194.3).\n10. Finish turn diameter Ø59.1 mm over length 43.8 mm (from Z=0.0 to Z=152.4).\n11. Finish turn diameter Ø44.4 mm over length 40.3 mm (from Z=0.0 to Z=108.6).\n12. Finish turn diameter Ø30.0 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04984", "images": ["images/Shaft_04984.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.5 mm and length at least 121.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 6.3 mm (from Z=0.0 to Z=6.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.4 mm over length 40.0 mm (from Z=0.0 to Z=110.0).\n9. Finish turn diameter Ø30.0 mm over length 70.0 mm (from Z=0.0 to Z=70.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00575", "images": ["images/Shaft_00575.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.4 mm and length at least 285.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 8.4 mm (from Z=0.0 to Z=252.9).\n10. Finish turn diameter Ø58.6 mm over length 73.5 mm (from Z=0.0 to Z=244.5).\n11. Finish turn diameter Ø45.1 mm over length 44.7 mm (from Z=0.0 to Z=171.0).\n12. Finish turn diameter Ø30.0 mm over length 126.3 mm (from Z=0.0 to Z=126.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02966", "images": ["images/Shaft_02966.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.4 mm and length at least 311.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.4 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.8 mm over length 51.2 mm (from Z=0.0 to Z=214.1).\n10. Finish turn diameter Ø51.5 mm over length 59.4 mm (from Z=0.0 to Z=162.9).\n11. Finish turn diameter Ø42.1 mm over length 103.5 mm (from Z=0.0 to Z=103.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01625", "images": ["images/Shaft_01625.png", "detail_png/Shaft_01625_length.png", "detail_png/Shaft_01625_diam.png", "detail_png/Shaft_01625_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.6 mm and length at least 70.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.0 mm over length 9.5 mm (from Z=0.0 to Z=53.8).\n9. Finish turn diameter Ø41.1 mm over length 12.4 mm (from Z=0.0 to Z=44.3).\n10. Finish turn diameter Ø30.0 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00369", "images": ["images/Shaft_00369.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.1 mm and length at least 76.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.1 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.7 mm over length 22.2 mm (from Z=0.0 to Z=53.5).\n9. Finish turn diameter Ø42.2 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02692", "images": ["images/Shaft_02692.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.4 mm and length at least 100.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.1 mm over length 14.8 mm (from Z=0.0 to Z=71.5).\n9. Finish turn diameter Ø30.0 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04884", "images": ["images/Shaft_04884.png", "detail_png/Shaft_04884_length.png", "detail_png/Shaft_04884_diam.png", "detail_png/Shaft_04884_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.0 mm and length at least 285.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 62.2 mm (from Z=0.0 to Z=219.1).\n10. Finish turn diameter Ø30.0 mm over length 156.9 mm (from Z=0.0 to Z=156.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03265", "images": ["images/Shaft_03265.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.4 mm and length at least 175.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.0 mm over length 21.9 mm (from Z=0.0 to Z=149.1).\n9. Finish turn diameter Ø46.0 mm over length 88.1 mm (from Z=0.0 to Z=127.2).\n10. Finish turn diameter Ø35.3 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01667", "images": ["images/Shaft_01667.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.0 mm and length at least 73.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 7.1 mm (from Z=0.0 to Z=7.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.7 mm over length 14.0 mm (from Z=0.0 to Z=61.1).\n9. Finish turn diameter Ø30.0 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00260", "images": ["images/Shaft_00260.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.0 mm and length at least 140.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.0 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.1 mm (from Z=0.0 to Z=95.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04197", "images": ["images/Shaft_04197.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.7 mm and length at least 256.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 94.8 mm (from Z=0.0 to Z=94.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 53.9 mm (from Z=0.0 to Z=156.5).\n10. Finish turn diameter Ø42.3 mm over length 86.3 mm (from Z=0.0 to Z=102.6).\n11. Finish turn diameter Ø33.9 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03603", "images": ["images/Shaft_03603.png", "detail_png/Shaft_03603_length.png", "detail_png/Shaft_03603_diam.png", "detail_png/Shaft_03603_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.2 mm and length at least 70.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.2 mm over length 6.8 mm (from Z=0.0 to Z=50.4).\n9. Finish turn diameter Ø54.7 mm over length 18.8 mm (from Z=0.0 to Z=43.6).\n10. Finish turn diameter Ø50.3 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01285", "images": ["images/Shaft_01285.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.1 mm and length at least 211.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.8 mm over length 71.5 mm (from Z=0.0 to Z=175.4).\n10. Finish turn diameter Ø49.0 mm over length 76.7 mm (from Z=0.0 to Z=103.9).\n11. Finish turn diameter Ø34.5 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00343", "images": ["images/Shaft_00343.png", "detail_png/Shaft_00343_length.png", "detail_png/Shaft_00343_diam.png", "detail_png/Shaft_00343_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.5 mm and length at least 181.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.7 mm over length 42.4 mm (from Z=0.0 to Z=107.2).\n9. Finish turn diameter Ø30.0 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00226", "images": ["images/Shaft_00226.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.7 mm and length at least 178.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.7 mm over length 87.3 mm (from Z=0.0 to Z=142.6).\n9. Finish turn diameter Ø60.3 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00081", "images": ["images/Shaft_00081.png", "detail_png/Shaft_00081_length.png", "detail_png/Shaft_00081_diam.png", "detail_png/Shaft_00081_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.2 mm and length at least 194.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.5 mm over length 57.9 mm (from Z=0.0 to Z=156.0).\n9. Finish turn diameter Ø58.6 mm over length 81.3 mm (from Z=0.0 to Z=98.1).\n10. Finish turn diameter Ø55.0 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01990", "images": ["images/Shaft_01990.png", "detail_png/Shaft_01990_length.png", "detail_png/Shaft_01990_diam.png", "detail_png/Shaft_01990_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.7 mm and length at least 144.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 63.7 mm (from Z=0.0 to Z=63.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.2 mm over length 51.4 mm (from Z=0.0 to Z=76.1).\n9. Finish turn diameter Ø30.5 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02959", "images": ["images/Shaft_02959.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.3 mm and length at least 227.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 112.1 mm (from Z=0.0 to Z=112.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.4 mm over length 84.5 mm (from Z=0.0 to Z=110.7).\n10. Finish turn diameter Ø51.0 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03848", "images": ["images/Shaft_03848.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.9 mm and length at least 197.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.1 mm over length 17.6 mm (from Z=0.0 to Z=130.4).\n10. Finish turn diameter Ø30.0 mm over length 112.8 mm (from Z=0.0 to Z=112.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02639", "images": ["images/Shaft_02639.png", "detail_png/Shaft_02639_length.png", "detail_png/Shaft_02639_diam.png", "detail_png/Shaft_02639_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.2 mm and length at least 299.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 149.5 mm (from Z=0.0 to Z=149.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 73.3 mm (from Z=0.0 to Z=145.1).\n10. Finish turn diameter Ø30.0 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00720", "images": ["images/Shaft_00720.png", "detail_png/Shaft_00720_length.png", "detail_png/Shaft_00720_diam.png", "detail_png/Shaft_00720_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.7 mm and length at least 259.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 35.4 mm (from Z=0.0 to Z=189.3).\n10. Finish turn diameter Ø30.0 mm over length 153.9 mm (from Z=0.0 to Z=153.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02255", "images": ["images/Shaft_02255.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.4 mm and length at least 322.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.9 mm over length 100.0 mm (from Z=0.0 to Z=218.2).\n10. Finish turn diameter Ø30.0 mm over length 118.2 mm (from Z=0.0 to Z=118.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03489", "images": ["images/Shaft_03489.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.0 mm and length at least 121.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.0 mm over length 5.3 mm (from Z=0.0 to Z=99.7).\n9. Finish turn diameter Ø51.6 mm over length 37.4 mm (from Z=0.0 to Z=94.4).\n10. Finish turn diameter Ø35.1 mm over length 40.3 mm (from Z=0.0 to Z=57.0).\n11. Finish turn diameter Ø30.0 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01137", "images": ["images/Shaft_01137.png", "detail_png/Shaft_01137_length.png", "detail_png/Shaft_01137_diam.png", "detail_png/Shaft_01137_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.3 mm and length at least 79.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.3 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.4 mm over length 7.5 mm (from Z=0.0 to Z=53.9).\n9. Finish turn diameter Ø30.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01058", "images": ["images/Shaft_01058.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.6 mm and length at least 222.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.6 mm over length 73.2 mm (from Z=0.0 to Z=73.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 66.4 mm (from Z=0.0 to Z=143.9).\n10. Finish turn diameter Ø39.0 mm over length 77.5 mm (from Z=0.0 to Z=77.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03596", "images": ["images/Shaft_03596.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 250.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 179.9 mm (from Z=0.0 to Z=179.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.9 mm over length 65.5 mm (from Z=0.0 to Z=65.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00558", "images": ["images/Shaft_00558.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.2 mm and length at least 97.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 12.1 mm (from Z=0.0 to Z=72.2).\n9. Finish turn diameter Ø40.6 mm over length 51.7 mm (from Z=0.0 to Z=60.1).\n10. Finish turn diameter Ø30.0 mm over length 8.4 mm (from Z=0.0 to Z=8.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04630", "images": ["images/Shaft_04630.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.1 mm and length at least 303.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.1 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 76.3 mm (from Z=0.0 to Z=256.3).\n10. Finish turn diameter Ø34.9 mm over length 47.0 mm (from Z=0.0 to Z=180.0).\n11. Finish turn diameter Ø30.0 mm over length 133.0 mm (from Z=0.0 to Z=133.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00652", "images": ["images/Shaft_00652.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.2 mm and length at least 279.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.3 mm over length 48.3 mm (from Z=0.0 to Z=212.0).\n10. Finish turn diameter Ø40.3 mm over length 60.8 mm (from Z=0.0 to Z=163.7).\n11. Finish turn diameter Ø30.0 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03404", "images": ["images/Shaft_03404.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.8 mm and length at least 105.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.8 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.2 mm over length 28.6 mm (from Z=0.0 to Z=58.4).\n9. Finish turn diameter Ø47.1 mm over length 8.2 mm (from Z=0.0 to Z=29.8).\n10. Finish turn diameter Ø30.0 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00151", "images": ["images/Shaft_00151.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.8 mm and length at least 192.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 68.8 mm (from Z=0.0 to Z=68.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 118.4 mm (from Z=0.0 to Z=118.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04482", "images": ["images/Shaft_04482.png", "detail_png/Shaft_04482_length.png", "detail_png/Shaft_04482_diam.png", "detail_png/Shaft_04482_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 260.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 240.5 mm (from Z=0.0 to Z=240.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.0 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01728", "images": ["images/Shaft_01728.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.4 mm and length at least 296.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.4 mm over length 90.5 mm (from Z=0.0 to Z=90.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.0 mm over length 81.8 mm (from Z=0.0 to Z=201.3).\n10. Finish turn diameter Ø47.9 mm over length 63.0 mm (from Z=0.0 to Z=119.5).\n11. Finish turn diameter Ø33.1 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04766", "images": ["images/Shaft_04766.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.6 mm and length at least 306.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 32.0 mm (from Z=0.0 to Z=32.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.1 mm over length 38.9 mm (from Z=0.0 to Z=269.1).\n10. Finish turn diameter Ø36.0 mm over length 54.1 mm (from Z=0.0 to Z=230.2).\n11. Finish turn diameter Ø30.0 mm over length 176.1 mm (from Z=0.0 to Z=176.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02293", "images": ["images/Shaft_02293.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.3 mm and length at least 84.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.3 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.1 mm over length 5.0 mm (from Z=0.0 to Z=51.7).\n9. Finish turn diameter Ø51.3 mm over length 9.8 mm (from Z=0.0 to Z=46.7).\n10. Finish turn diameter Ø36.2 mm over length 9.0 mm (from Z=0.0 to Z=36.9).\n11. Finish turn diameter Ø30.0 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04367", "images": ["images/Shaft_04367.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.8 mm and length at least 272.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.2 mm over length 56.7 mm (from Z=0.0 to Z=210.9).\n10. Finish turn diameter Ø31.9 mm over length 53.0 mm (from Z=0.0 to Z=154.2).\n11. Finish turn diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01901", "images": ["images/Shaft_01901.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.4 mm and length at least 123.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.0 mm (from Z=0.0 to Z=73.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01271", "images": ["images/Shaft_01271.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.2 mm and length at least 167.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.2 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 121.3 mm (from Z=0.0 to Z=121.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04116", "images": ["images/Shaft_04116.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.0 mm and length at least 88.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.3 mm over length 15.8 mm (from Z=0.0 to Z=68.1).\n9. Finish turn diameter Ø30.0 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00113", "images": ["images/Shaft_00113.png", "detail_png/Shaft_00113_length.png", "detail_png/Shaft_00113_diam.png", "detail_png/Shaft_00113_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.3 mm and length at least 187.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 120.1 mm (from Z=0.0 to Z=120.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00786", "images": ["images/Shaft_00786.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 72.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.9 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00614", "images": ["images/Shaft_00614.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.4 mm and length at least 107.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.5 mm over length 9.2 mm (from Z=0.0 to Z=63.7).\n9. Finish turn diameter Ø38.9 mm over length 14.8 mm (from Z=0.0 to Z=54.5).\n10. Finish turn diameter Ø30.0 mm over length 39.7 mm (from Z=0.0 to Z=39.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04499", "images": ["images/Shaft_04499.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 260.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 226.1 mm (from Z=0.0 to Z=226.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00976", "images": ["images/Shaft_00976.png", "detail_png/Shaft_00976_length.png", "detail_png/Shaft_00976_diam.png", "detail_png/Shaft_00976_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.3 mm and length at least 175.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.5 mm over length 32.4 mm (from Z=0.0 to Z=97.8).\n9. Finish turn diameter Ø46.3 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01662", "images": ["images/Shaft_01662.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.3 mm and length at least 271.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.3 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.1 mm over length 25.3 mm (from Z=0.0 to Z=227.5).\n10. Finish turn diameter Ø61.9 mm over length 57.2 mm (from Z=0.0 to Z=202.2).\n11. Finish turn diameter Ø52.2 mm over length 80.3 mm (from Z=0.0 to Z=145.0).\n12. Finish turn diameter Ø48.9 mm over length 64.7 mm (from Z=0.0 to Z=64.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00967", "images": ["images/Shaft_00967.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.3 mm and length at least 305.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 269.4 mm (from Z=0.0 to Z=269.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02462", "images": ["images/Shaft_02462.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.1 mm and length at least 227.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 29.9 mm (from Z=0.0 to Z=29.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.5 mm over length 87.8 mm (from Z=0.0 to Z=192.6).\n10. Finish turn diameter Ø30.0 mm over length 104.8 mm (from Z=0.0 to Z=104.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02813", "images": ["images/Shaft_02813.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.7 mm and length at least 134.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.7 mm (from Z=0.0 to Z=95.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01050", "images": ["images/Shaft_01050.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.2 mm and length at least 206.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.2 mm over length 64.9 mm (from Z=0.0 to Z=182.3).\n10. Finish turn diameter Ø41.8 mm over length 78.7 mm (from Z=0.0 to Z=117.4).\n11. Finish turn diameter Ø32.0 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04401", "images": ["images/Shaft_04401.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.5 mm and length at least 145.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.2 mm over length 38.8 mm (from Z=0.0 to Z=83.6).\n9. Finish turn diameter Ø40.2 mm over length 35.9 mm (from Z=0.0 to Z=44.8).\n10. Finish turn diameter Ø30.0 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04060", "images": ["images/Shaft_04060.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.0 mm and length at least 107.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 9.7 mm (from Z=0.0 to Z=9.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.2 mm over length 21.2 mm (from Z=0.0 to Z=92.8).\n9. Finish turn diameter Ø47.6 mm over length 20.7 mm (from Z=0.0 to Z=71.6).\n10. Finish turn diameter Ø33.8 mm over length 17.1 mm (from Z=0.0 to Z=50.9).\n11. Finish turn diameter Ø30.0 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01175", "images": ["images/Shaft_01175.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.2 mm and length at least 170.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.2 mm over length 67.7 mm (from Z=0.0 to Z=93.8).\n9. Finish turn diameter Ø36.7 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01093", "images": ["images/Shaft_01093.png", "detail_png/Shaft_01093_length.png", "detail_png/Shaft_01093_diam.png", "detail_png/Shaft_01093_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.6 mm and length at least 96.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 76.0 mm (from Z=0.0 to Z=76.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01689", "images": ["images/Shaft_01689.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.4 mm and length at least 245.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.4 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 206.6 mm (from Z=0.0 to Z=206.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00833", "images": ["images/Shaft_00833.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 130.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.5 mm (from Z=0.0 to Z=107.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02596", "images": ["images/Shaft_02596.png", "detail_png/Shaft_02596_length.png", "detail_png/Shaft_02596_diam.png", "detail_png/Shaft_02596_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.5 mm and length at least 246.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 68.0 mm (from Z=0.0 to Z=68.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 104.8 mm (from Z=0.0 to Z=173.9).\n10. Finish turn diameter Ø41.0 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00263", "images": ["images/Shaft_00263.png", "detail_png/Shaft_00263_length.png", "detail_png/Shaft_00263_diam.png", "detail_png/Shaft_00263_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.3 mm and length at least 68.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.8 mm over length 19.0 mm (from Z=0.0 to Z=58.0).\n9. Finish turn diameter Ø30.0 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01305", "images": ["images/Shaft_01305.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.7 mm and length at least 300.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.7 mm over length 83.7 mm (from Z=0.0 to Z=83.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.4 mm over length 49.7 mm (from Z=0.0 to Z=211.6).\n10. Finish turn diameter Ø30.0 mm over length 161.9 mm (from Z=0.0 to Z=161.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04882", "images": ["images/Shaft_04882.png", "detail_png/Shaft_04882_length.png", "detail_png/Shaft_04882_diam.png", "detail_png/Shaft_04882_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.8 mm and length at least 194.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.1 mm over length 53.4 mm (from Z=0.0 to Z=142.2).\n9. Finish turn diameter Ø30.0 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01783", "images": ["images/Shaft_01783.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.9 mm and length at least 233.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.1 mm over length 28.3 mm (from Z=0.0 to Z=174.4).\n10. Finish turn diameter Ø30.0 mm over length 146.1 mm (from Z=0.0 to Z=146.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03805", "images": ["images/Shaft_03805.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.7 mm and length at least 66.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.7 mm over length 15.8 mm (from Z=0.0 to Z=39.4).\n9. Finish turn diameter Ø50.9 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04476", "images": ["images/Shaft_04476.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.1 mm and length at least 196.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.4 mm (from Z=0.0 to Z=166.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03358", "images": ["images/Shaft_03358.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.1 mm and length at least 296.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.8 mm (from Z=0.0 to Z=229.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03057", "images": ["images/Shaft_03057.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.0 mm and length at least 98.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 69.1 mm (from Z=0.0 to Z=69.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00616", "images": ["images/Shaft_00616.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 221.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 173.2 mm (from Z=0.0 to Z=173.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.4 mm over length 43.4 mm (from Z=0.0 to Z=43.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00984", "images": ["images/Shaft_00984.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.3 mm and length at least 318.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø74.4 mm over length 26.3 mm (from Z=0.0 to Z=275.7).\n10. Finish turn diameter Ø63.4 mm over length 76.7 mm (from Z=0.0 to Z=249.4).\n11. Finish turn diameter Ø50.6 mm over length 69.4 mm (from Z=0.0 to Z=172.7).\n12. Finish turn diameter Ø38.4 mm over length 31.7 mm (from Z=0.0 to Z=103.3).\n13. Finish turn diameter Ø30.0 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03894", "images": ["images/Shaft_03894.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.0 mm and length at least 283.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 65.2 mm (from Z=0.0 to Z=238.4).\n10. Finish turn diameter Ø37.4 mm over length 49.8 mm (from Z=0.0 to Z=173.2).\n11. Finish turn diameter Ø33.9 mm over length 49.6 mm (from Z=0.0 to Z=123.4).\n12. Finish turn diameter Ø30.0 mm over length 73.8 mm (from Z=0.0 to Z=73.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01894", "images": ["images/Shaft_01894.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.3 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 214.6 mm (from Z=0.0 to Z=214.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01492", "images": ["images/Shaft_01492.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.5 mm and length at least 76.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.9 mm over length 30.1 mm (from Z=0.0 to Z=50.0).\n9. Finish turn diameter Ø56.7 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00821", "images": ["images/Shaft_00821.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.0 mm and length at least 273.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 108.7 mm (from Z=0.0 to Z=108.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 34.9 mm (from Z=0.0 to Z=159.3).\n10. Finish turn diameter Ø51.1 mm over length 30.4 mm (from Z=0.0 to Z=124.4).\n11. Finish turn diameter Ø45.6 mm over length 71.6 mm (from Z=0.0 to Z=94.0).\n12. Finish turn diameter Ø37.1 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02139", "images": ["images/Shaft_02139.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.9 mm and length at least 300.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.9 mm over length 25.7 mm (from Z=0.0 to Z=265.1).\n10. Finish turn diameter Ø57.1 mm over length 35.8 mm (from Z=0.0 to Z=239.4).\n11. Finish turn diameter Ø41.6 mm over length 96.3 mm (from Z=0.0 to Z=203.6).\n12. Finish turn diameter Ø31.6 mm over length 54.2 mm (from Z=0.0 to Z=107.3).\n13. Finish turn diameter Ø30.0 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00245", "images": ["images/Shaft_00245.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.2 mm and length at least 238.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.2 mm over length 125.9 mm (from Z=0.0 to Z=184.3).\n10. Finish turn diameter Ø38.2 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02567", "images": ["images/Shaft_02567.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 199.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.5 mm (from Z=0.0 to Z=147.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.5 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02976", "images": ["images/Shaft_02976.png", "detail_png/Shaft_02976_length.png", "detail_png/Shaft_02976_diam.png", "detail_png/Shaft_02976_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.9 mm and length at least 263.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 77.3 mm (from Z=0.0 to Z=77.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 29.9 mm (from Z=0.0 to Z=181.2).\n10. Finish turn diameter Ø30.0 mm over length 151.3 mm (from Z=0.0 to Z=151.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02318", "images": ["images/Shaft_02318.png", "detail_png/Shaft_02318_length.png", "detail_png/Shaft_02318_diam.png", "detail_png/Shaft_02318_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.2 mm and length at least 111.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.5 mm over length 24.3 mm (from Z=0.0 to Z=93.5).\n9. Finish turn diameter Ø49.4 mm over length 22.0 mm (from Z=0.0 to Z=69.2).\n10. Finish turn diameter Ø38.4 mm over length 19.8 mm (from Z=0.0 to Z=47.2).\n11. Finish turn diameter Ø30.0 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04498", "images": ["images/Shaft_04498.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 304.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 209.7 mm (from Z=0.0 to Z=209.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04679", "images": ["images/Shaft_04679.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.8 mm and length at least 118.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.5 mm over length 28.8 mm (from Z=0.0 to Z=93.8).\n9. Finish turn diameter Ø46.4 mm over length 25.2 mm (from Z=0.0 to Z=65.0).\n10. Finish turn diameter Ø35.2 mm over length 24.4 mm (from Z=0.0 to Z=39.8).\n11. Finish turn diameter Ø30.0 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02516", "images": ["images/Shaft_02516.png", "detail_png/Shaft_02516_length.png", "detail_png/Shaft_02516_diam.png", "detail_png/Shaft_02516_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.5 mm and length at least 106.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.7 mm over length 35.9 mm (from Z=0.0 to Z=92.6).\n9. Finish turn diameter Ø45.8 mm over length 8.2 mm (from Z=0.0 to Z=56.7).\n10. Finish turn diameter Ø30.1 mm over length 33.2 mm (from Z=0.0 to Z=48.5).\n11. Finish turn diameter Ø30.0 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04442", "images": ["images/Shaft_04442.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.3 mm and length at least 258.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.9 mm (from Z=0.0 to Z=181.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02612", "images": ["images/Shaft_02612.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 80.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.4 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01097", "images": ["images/Shaft_01097.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.4 mm and length at least 204.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.4 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.5 mm over length 47.7 mm (from Z=0.0 to Z=179.3).\n10. Finish turn diameter Ø30.0 mm over length 131.6 mm (from Z=0.0 to Z=131.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04680", "images": ["images/Shaft_04680.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.8 mm and length at least 159.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 62.9 mm (from Z=0.0 to Z=62.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 63.9 mm (from Z=0.0 to Z=91.7).\n9. Finish turn diameter Ø30.0 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03040", "images": ["images/Shaft_03040.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.7 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 213.7 mm (from Z=0.0 to Z=213.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04791", "images": ["images/Shaft_04791.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.7 mm and length at least 105.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.7 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.2 mm over length 34.2 mm (from Z=0.0 to Z=77.3).\n9. Finish turn diameter Ø56.2 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00872", "images": ["images/Shaft_00872.png", "detail_png/Shaft_00872_length.png", "detail_png/Shaft_00872_diam.png", "detail_png/Shaft_00872_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.3 mm and length at least 85.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04332", "images": ["images/Shaft_04332.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.9 mm and length at least 261.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.8 mm over length 70.4 mm (from Z=0.0 to Z=209.4).\n10. Finish turn diameter Ø53.8 mm over length 21.6 mm (from Z=0.0 to Z=139.0).\n11. Finish turn diameter Ø44.1 mm over length 62.3 mm (from Z=0.0 to Z=117.4).\n12. Finish turn diameter Ø30.0 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04104", "images": ["images/Shaft_04104.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.9 mm and length at least 280.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 19.4 mm (from Z=0.0 to Z=201.1).\n10. Finish turn diameter Ø34.6 mm over length 123.9 mm (from Z=0.0 to Z=181.7).\n11. Finish turn diameter Ø30.0 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00764", "images": ["images/Shaft_00764.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 204.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 166.3 mm (from Z=0.0 to Z=166.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.4 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02114", "images": ["images/Shaft_02114.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.3 mm and length at least 109.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.0 mm over length 34.9 mm (from Z=0.0 to Z=75.7).\n9. Finish turn diameter Ø51.8 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02880", "images": ["images/Shaft_02880.png", "detail_png/Shaft_02880_length.png", "detail_png/Shaft_02880_diam.png", "detail_png/Shaft_02880_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.5 mm and length at least 118.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.9 mm over length 27.9 mm (from Z=0.0 to Z=84.2).\n9. Finish turn diameter Ø49.0 mm over length 23.9 mm (from Z=0.0 to Z=56.3).\n10. Finish turn diameter Ø37.9 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02571", "images": ["images/Shaft_02571.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.2 mm and length at least 143.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.2 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.3 mm over length 39.0 mm (from Z=0.0 to Z=113.0).\n9. Finish turn diameter Ø36.0 mm over length 21.1 mm (from Z=0.0 to Z=74.0).\n10. Finish turn diameter Ø30.0 mm over length 52.9 mm (from Z=0.0 to Z=52.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00076", "images": ["images/Shaft_00076.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 154.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.0 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00739", "images": ["images/Shaft_00739.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.3 mm and length at least 252.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.3 mm over length 158.3 mm (from Z=0.0 to Z=158.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 89.5 mm (from Z=0.0 to Z=89.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02242", "images": ["images/Shaft_02242.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.8 mm and length at least 90.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.8 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.9 mm over length 28.0 mm (from Z=0.0 to Z=71.9).\n9. Finish turn diameter Ø46.0 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03797", "images": ["images/Shaft_03797.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 230.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 145.7 mm (from Z=0.0 to Z=145.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.0 mm over length 79.7 mm (from Z=0.0 to Z=79.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03910", "images": ["images/Shaft_03910.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.3 mm and length at least 83.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.3 mm over length 30.1 mm (from Z=0.0 to Z=73.1).\n9. Finish turn diameter Ø30.0 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01856", "images": ["images/Shaft_01856.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.1 mm and length at least 128.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 94.1 mm (from Z=0.0 to Z=94.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02110", "images": ["images/Shaft_02110.png", "detail_png/Shaft_02110_length.png", "detail_png/Shaft_02110_diam.png", "detail_png/Shaft_02110_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.7 mm and length at least 75.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.4 mm over length 5.0 mm (from Z=0.0 to Z=45.2).\n9. Finish turn diameter Ø49.5 mm over length 8.5 mm (from Z=0.0 to Z=40.2).\n10. Finish turn diameter Ø36.2 mm over length 17.5 mm (from Z=0.0 to Z=31.7).\n11. Finish turn diameter Ø30.7 mm over length 9.2 mm (from Z=0.0 to Z=14.2).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04622", "images": ["images/Shaft_04622.png", "detail_png/Shaft_04622_length.png", "detail_png/Shaft_04622_diam.png", "detail_png/Shaft_04622_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 149.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 124.9 mm (from Z=0.0 to Z=124.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01029", "images": ["images/Shaft_01029.png", "detail_png/Shaft_01029_length.png", "detail_png/Shaft_01029_diam.png", "detail_png/Shaft_01029_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.3 mm and length at least 167.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.3 mm over length 32.1 mm (from Z=0.0 to Z=32.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 129.9 mm (from Z=0.0 to Z=129.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01647", "images": ["images/Shaft_01647.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 319.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 234.9 mm (from Z=0.0 to Z=234.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.5 mm over length 79.4 mm (from Z=0.0 to Z=79.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03838", "images": ["images/Shaft_03838.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.4 mm and length at least 315.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 122.1 mm (from Z=0.0 to Z=122.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.7 mm over length 85.6 mm (from Z=0.0 to Z=188.5).\n10. Finish turn diameter Ø30.0 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03600", "images": ["images/Shaft_03600.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.2 mm and length at least 201.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.6 mm over length 45.2 mm (from Z=0.0 to Z=140.2).\n10. Finish turn diameter Ø53.6 mm over length 55.4 mm (from Z=0.0 to Z=95.0).\n11. Finish turn diameter Ø46.6 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01283", "images": ["images/Shaft_01283.png", "detail_png/Shaft_01283_length.png", "detail_png/Shaft_01283_diam.png", "detail_png/Shaft_01283_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.9 mm and length at least 90.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.1 mm over length 17.8 mm (from Z=0.0 to Z=68.5).\n9. Finish turn diameter Ø39.5 mm over length 5.0 mm (from Z=0.0 to Z=50.7).\n10. Finish turn diameter Ø30.0 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03988", "images": ["images/Shaft_03988.png", "detail_png/Shaft_03988_length.png", "detail_png/Shaft_03988_diam.png", "detail_png/Shaft_03988_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.9 mm and length at least 262.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.7 mm over length 31.0 mm (from Z=0.0 to Z=211.9).\n10. Finish turn diameter Ø59.9 mm over length 34.8 mm (from Z=0.0 to Z=180.9).\n11. Finish turn diameter Ø44.0 mm over length 35.3 mm (from Z=0.0 to Z=146.1).\n12. Finish turn diameter Ø30.0 mm over length 110.8 mm (from Z=0.0 to Z=110.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04933", "images": ["images/Shaft_04933.png", "detail_png/Shaft_04933_length.png", "detail_png/Shaft_04933_diam.png", "detail_png/Shaft_04933_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.0 mm and length at least 109.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.0 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 93.0 mm (from Z=0.0 to Z=93.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04208", "images": ["images/Shaft_04208.png", "detail_png/Shaft_04208_length.png", "detail_png/Shaft_04208_diam.png", "detail_png/Shaft_04208_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.6 mm and length at least 86.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.6 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.8 mm over length 47.1 mm (from Z=0.0 to Z=64.2).\n9. Finish turn diameter Ø30.0 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01228", "images": ["images/Shaft_01228.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.6 mm and length at least 249.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.3 mm over length 22.8 mm (from Z=0.0 to Z=192.2).\n10. Finish turn diameter Ø36.9 mm over length 62.5 mm (from Z=0.0 to Z=169.4).\n11. Finish turn diameter Ø32.3 mm over length 49.1 mm (from Z=0.0 to Z=106.9).\n12. Finish turn diameter Ø30.0 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03399", "images": ["images/Shaft_03399.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.1 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 183.3 mm (from Z=0.0 to Z=183.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03819", "images": ["images/Shaft_03819.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.6 mm and length at least 199.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 95.2 mm (from Z=0.0 to Z=129.4).\n10. Finish turn diameter Ø30.0 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04256", "images": ["images/Shaft_04256.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.0 mm and length at least 72.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.2 mm over length 17.7 mm (from Z=0.0 to Z=57.3).\n9. Finish turn diameter Ø55.9 mm over length 15.8 mm (from Z=0.0 to Z=39.6).\n10. Finish turn diameter Ø52.1 mm over length 5.0 mm (from Z=0.0 to Z=23.8).\n11. Finish turn diameter Ø38.7 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04856", "images": ["images/Shaft_04856.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.4 mm and length at least 99.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.4 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 25.6 mm (from Z=0.0 to Z=61.4).\n9. Finish turn diameter Ø34.6 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01422", "images": ["images/Shaft_01422.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.7 mm and length at least 198.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.4 mm over length 11.8 mm (from Z=0.0 to Z=141.1).\n10. Finish turn diameter Ø30.0 mm over length 129.3 mm (from Z=0.0 to Z=129.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03638", "images": ["images/Shaft_03638.png", "detail_png/Shaft_03638_length.png", "detail_png/Shaft_03638_diam.png", "detail_png/Shaft_03638_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 250.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 170.2 mm (from Z=0.0 to Z=170.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.4 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01749", "images": ["images/Shaft_01749.png", "detail_png/Shaft_01749_length.png", "detail_png/Shaft_01749_diam.png", "detail_png/Shaft_01749_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.5 mm and length at least 135.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.3 mm over length 14.5 mm (from Z=0.0 to Z=90.0).\n9. Finish turn diameter Ø49.3 mm over length 5.9 mm (from Z=0.0 to Z=75.5).\n10. Finish turn diameter Ø44.1 mm over length 58.3 mm (from Z=0.0 to Z=69.6).\n11. Finish turn diameter Ø32.3 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04911", "images": ["images/Shaft_04911.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.6 mm and length at least 139.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 65.8 mm (from Z=0.0 to Z=65.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.7 mm over length 38.0 mm (from Z=0.0 to Z=68.4).\n9. Finish turn diameter Ø41.9 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02175", "images": ["images/Shaft_02175.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 165.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 130.0 mm (from Z=0.0 to Z=130.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.3 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04967", "images": ["images/Shaft_04967.png", "detail_png/Shaft_04967_length.png", "detail_png/Shaft_04967_diam.png", "detail_png/Shaft_04967_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.8 mm and length at least 102.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.8 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.0 mm over length 14.7 mm (from Z=0.0 to Z=74.3).\n9. Finish turn diameter Ø51.4 mm over length 22.1 mm (from Z=0.0 to Z=59.6).\n10. Finish turn diameter Ø46.5 mm over length 6.6 mm (from Z=0.0 to Z=37.5).\n11. Finish turn diameter Ø38.4 mm over length 6.8 mm (from Z=0.0 to Z=30.9).\n12. Finish turn diameter Ø35.4 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04190", "images": ["images/Shaft_04190.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.8 mm and length at least 314.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.8 mm over length 73.8 mm (from Z=0.0 to Z=73.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 76.7 mm (from Z=0.0 to Z=235.2).\n10. Finish turn diameter Ø49.7 mm over length 27.3 mm (from Z=0.0 to Z=158.5).\n11. Finish turn diameter Ø40.7 mm over length 64.6 mm (from Z=0.0 to Z=131.2).\n12. Finish turn diameter Ø30.0 mm over length 66.6 mm (from Z=0.0 to Z=66.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03839", "images": ["images/Shaft_03839.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.6 mm and length at least 142.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.6 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 5.0 mm (from Z=0.0 to Z=102.5).\n9. Finish turn diameter Ø30.3 mm over length 29.7 mm (from Z=0.0 to Z=97.5).\n10. Finish turn diameter Ø30.0 mm over length 67.8 mm (from Z=0.0 to Z=67.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01379", "images": ["images/Shaft_01379.png", "detail_png/Shaft_01379_length.png", "detail_png/Shaft_01379_diam.png", "detail_png/Shaft_01379_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.1 mm and length at least 266.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 81.6 mm (from Z=0.0 to Z=81.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.5 mm over length 44.1 mm (from Z=0.0 to Z=180.3).\n10. Finish turn diameter Ø30.0 mm over length 136.2 mm (from Z=0.0 to Z=136.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02424", "images": ["images/Shaft_02424.png", "detail_png/Shaft_02424_length.png", "detail_png/Shaft_02424_diam.png", "detail_png/Shaft_02424_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.3 mm and length at least 145.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 122.2 mm (from Z=0.0 to Z=122.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00388", "images": ["images/Shaft_00388.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.3 mm and length at least 148.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.3 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.2 mm over length 34.8 mm (from Z=0.0 to Z=135.7).\n10. Finish turn diameter Ø30.0 mm over length 100.9 mm (from Z=0.0 to Z=100.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03575", "images": ["images/Shaft_03575.png", "detail_png/Shaft_03575_length.png", "detail_png/Shaft_03575_diam.png", "detail_png/Shaft_03575_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 132.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.2 mm over length 14.3 mm (from Z=0.0 to Z=86.8).\n9. Finish turn diameter Ø33.4 mm over length 40.9 mm (from Z=0.0 to Z=72.5).\n10. Finish turn diameter Ø30.0 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02939", "images": ["images/Shaft_02939.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 182.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 157.6 mm (from Z=0.0 to Z=157.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.5 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00376", "images": ["images/Shaft_00376.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.9 mm and length at least 99.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.2 mm (from Z=0.0 to Z=73.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03042", "images": ["images/Shaft_03042.png", "detail_png/Shaft_03042_length.png", "detail_png/Shaft_03042_diam.png", "detail_png/Shaft_03042_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.3 mm and length at least 69.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.3 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 11.6 mm (from Z=0.0 to Z=31.2).\n9. Finish turn diameter Ø35.7 mm over length 5.0 mm (from Z=0.0 to Z=19.6).\n10. Finish turn diameter Ø30.0 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02558", "images": ["images/Shaft_02558.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.9 mm and length at least 242.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.6 mm over length 86.6 mm (from Z=0.0 to Z=192.7).\n10. Finish turn diameter Ø37.6 mm over length 19.1 mm (from Z=0.0 to Z=106.1).\n11. Finish turn diameter Ø31.6 mm over length 87.0 mm (from Z=0.0 to Z=87.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03511", "images": ["images/Shaft_03511.png", "detail_png/Shaft_03511_length.png", "detail_png/Shaft_03511_diam.png", "detail_png/Shaft_03511_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.3 mm and length at least 107.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.5 mm over length 34.7 mm (from Z=0.0 to Z=64.3).\n9. Finish turn diameter Ø54.0 mm over length 5.6 mm (from Z=0.0 to Z=29.6).\n10. Finish turn diameter Ø47.6 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01646", "images": ["images/Shaft_01646.png", "detail_png/Shaft_01646_length.png", "detail_png/Shaft_01646_diam.png", "detail_png/Shaft_01646_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.0 mm and length at least 74.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.1 mm over length 9.0 mm (from Z=0.0 to Z=62.4).\n9. Finish turn diameter Ø30.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04639", "images": ["images/Shaft_04639.png", "detail_png/Shaft_04639_length.png", "detail_png/Shaft_04639_diam.png", "detail_png/Shaft_04639_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.0 mm and length at least 81.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01217", "images": ["images/Shaft_01217.png", "detail_png/Shaft_01217_length.png", "detail_png/Shaft_01217_diam.png", "detail_png/Shaft_01217_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.2 mm and length at least 312.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 245.8 mm (from Z=0.0 to Z=245.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04501", "images": ["images/Shaft_04501.png", "detail_png/Shaft_04501_length.png", "detail_png/Shaft_04501_diam.png", "detail_png/Shaft_04501_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.2 mm and length at least 73.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01086", "images": ["images/Shaft_01086.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.4 mm and length at least 204.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.4 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.6 mm over length 42.6 mm (from Z=0.0 to Z=179.9).\n10. Finish turn diameter Ø35.4 mm over length 43.8 mm (from Z=0.0 to Z=137.3).\n11. Finish turn diameter Ø30.0 mm over length 93.5 mm (from Z=0.0 to Z=93.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04796", "images": ["images/Shaft_04796.png", "detail_png/Shaft_04796_length.png", "detail_png/Shaft_04796_diam.png", "detail_png/Shaft_04796_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.2 mm and length at least 89.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 25.0 mm (from Z=0.0 to Z=25.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.9 mm over length 15.5 mm (from Z=0.0 to Z=59.3).\n9. Finish turn diameter Ø42.9 mm over length 20.2 mm (from Z=0.0 to Z=43.8).\n10. Finish turn diameter Ø30.3 mm over length 5.0 mm (from Z=0.0 to Z=23.6).\n11. Finish turn diameter Ø30.0 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04543", "images": ["images/Shaft_04543.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.4 mm and length at least 233.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.9 mm over length 96.5 mm (from Z=0.0 to Z=202.0).\n10. Finish turn diameter Ø53.4 mm over length 68.8 mm (from Z=0.0 to Z=105.5).\n11. Finish turn diameter Ø39.6 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02194", "images": ["images/Shaft_02194.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.5 mm and length at least 210.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.6 mm over length 48.2 mm (from Z=0.0 to Z=127.4).\n10. Finish turn diameter Ø40.6 mm over length 48.6 mm (from Z=0.0 to Z=79.2).\n11. Finish turn diameter Ø30.0 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04306", "images": ["images/Shaft_04306.png", "detail_png/Shaft_04306_length.png", "detail_png/Shaft_04306_diam.png", "detail_png/Shaft_04306_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 97.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 63.2 mm (from Z=0.0 to Z=63.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.7 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03224", "images": ["images/Shaft_03224.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.4 mm and length at least 132.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.4 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.9 mm over length 19.3 mm (from Z=0.0 to Z=103.3).\n9. Finish turn diameter Ø32.6 mm over length 25.7 mm (from Z=0.0 to Z=84.0).\n10. Finish turn diameter Ø30.0 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02602", "images": ["images/Shaft_02602.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.5 mm and length at least 292.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.6 mm over length 87.8 mm (from Z=0.0 to Z=242.1).\n10. Finish turn diameter Ø50.5 mm over length 59.2 mm (from Z=0.0 to Z=154.3).\n11. Finish turn diameter Ø47.4 mm over length 52.6 mm (from Z=0.0 to Z=95.1).\n12. Finish turn diameter Ø33.2 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02035", "images": ["images/Shaft_02035.png", "detail_png/Shaft_02035_length.png", "detail_png/Shaft_02035_diam.png", "detail_png/Shaft_02035_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.2 mm and length at least 128.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.2 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.2 mm over length 20.5 mm (from Z=0.0 to Z=97.6).\n9. Finish turn diameter Ø59.8 mm over length 26.3 mm (from Z=0.0 to Z=77.1).\n10. Finish turn diameter Ø41.7 mm over length 31.4 mm (from Z=0.0 to Z=50.8).\n11. Finish turn diameter Ø36.5 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00826", "images": ["images/Shaft_00826.png", "detail_png/Shaft_00826_length.png", "detail_png/Shaft_00826_diam.png", "detail_png/Shaft_00826_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.9 mm and length at least 169.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 77.6 mm (from Z=0.0 to Z=77.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 87.2 mm (from Z=0.0 to Z=87.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04179", "images": ["images/Shaft_04179.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.2 mm and length at least 265.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 70.7 mm (from Z=0.0 to Z=70.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.7 mm over length 63.6 mm (from Z=0.0 to Z=189.9).\n10. Finish turn diameter Ø33.3 mm over length 37.1 mm (from Z=0.0 to Z=126.3).\n11. Finish turn diameter Ø30.0 mm over length 89.2 mm (from Z=0.0 to Z=89.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01488", "images": ["images/Shaft_01488.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.0 mm and length at least 257.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 15.7 mm (from Z=0.0 to Z=197.1).\n10. Finish turn diameter Ø46.0 mm over length 75.7 mm (from Z=0.0 to Z=181.4).\n11. Finish turn diameter Ø30.4 mm over length 105.7 mm (from Z=0.0 to Z=105.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01226", "images": ["images/Shaft_01226.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.6 mm and length at least 189.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.2 mm over length 121.4 mm (from Z=0.0 to Z=138.5).\n9. Finish turn diameter Ø30.0 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02518", "images": ["images/Shaft_02518.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.8 mm and length at least 319.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.1 mm over length 54.9 mm (from Z=0.0 to Z=305.2).\n10. Finish turn diameter Ø30.0 mm over length 250.3 mm (from Z=0.0 to Z=250.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00682", "images": ["images/Shaft_00682.png", "detail_png/Shaft_00682_length.png", "detail_png/Shaft_00682_diam.png", "detail_png/Shaft_00682_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.6 mm and length at least 276.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 77.0 mm (from Z=0.0 to Z=77.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 194.3 mm (from Z=0.0 to Z=194.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01390", "images": ["images/Shaft_01390.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.1 mm and length at least 142.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.1 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.4 mm over length 40.0 mm (from Z=0.0 to Z=105.4).\n9. Finish turn diameter Ø30.0 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02733", "images": ["images/Shaft_02733.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 196.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.8 mm (from Z=0.0 to Z=147.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03133", "images": ["images/Shaft_03133.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.2 mm and length at least 322.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 86.7 mm (from Z=0.0 to Z=86.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.5 mm over length 70.8 mm (from Z=0.0 to Z=230.7).\n10. Finish turn diameter Ø30.0 mm over length 159.9 mm (from Z=0.0 to Z=159.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04274", "images": ["images/Shaft_04274.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.4 mm and length at least 97.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 10.5 mm (from Z=0.0 to Z=76.3).\n9. Finish turn diameter Ø48.8 mm over length 20.4 mm (from Z=0.0 to Z=65.8).\n10. Finish turn diameter Ø43.6 mm over length 20.3 mm (from Z=0.0 to Z=45.4).\n11. Finish turn diameter Ø38.2 mm over length 10.1 mm (from Z=0.0 to Z=25.1).\n12. Finish turn diameter Ø31.3 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02034", "images": ["images/Shaft_02034.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 273.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 207.1 mm (from Z=0.0 to Z=207.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04335", "images": ["images/Shaft_04335.png", "detail_png/Shaft_04335_length.png", "detail_png/Shaft_04335_diam.png", "detail_png/Shaft_04335_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.3 mm and length at least 118.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.0 mm over length 5.0 mm (from Z=0.0 to Z=83.8).\n9. Finish turn diameter Ø30.0 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04774", "images": ["images/Shaft_04774.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.8 mm and length at least 172.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.8 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.0 mm over length 56.0 mm (from Z=0.0 to Z=109.6).\n9. Finish turn diameter Ø41.1 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02765", "images": ["images/Shaft_02765.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.4 mm and length at least 127.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 11.8 mm (from Z=0.0 to Z=85.9).\n9. Finish turn diameter Ø30.0 mm over length 74.1 mm (from Z=0.0 to Z=74.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04828", "images": ["images/Shaft_04828.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.8 mm and length at least 87.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.8 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.2 mm over length 16.8 mm (from Z=0.0 to Z=47.3).\n9. Finish turn diameter Ø34.7 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04363", "images": ["images/Shaft_04363.png", "detail_png/Shaft_04363_length.png", "detail_png/Shaft_04363_diam.png", "detail_png/Shaft_04363_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 81.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 76.3 mm (from Z=0.0 to Z=76.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Break all edges (e.g., 2×45° where applicable).\n8. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02000", "images": ["images/Shaft_02000.png", "detail_png/Shaft_02000_length.png", "detail_png/Shaft_02000_diam.png", "detail_png/Shaft_02000_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.7 mm and length at least 181.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.7 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 35.0 mm (from Z=0.0 to Z=142.9).\n9. Finish turn diameter Ø56.5 mm over length 33.1 mm (from Z=0.0 to Z=107.9).\n10. Finish turn diameter Ø41.1 mm over length 15.9 mm (from Z=0.0 to Z=74.8).\n11. Finish turn diameter Ø32.2 mm over length 34.4 mm (from Z=0.0 to Z=58.9).\n12. Finish turn diameter Ø30.0 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00400", "images": ["images/Shaft_00400.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.6 mm and length at least 180.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 159.7 mm (from Z=0.0 to Z=159.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02345", "images": ["images/Shaft_02345.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.4 mm and length at least 125.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 13.7 mm (from Z=0.0 to Z=81.7).\n9. Finish turn diameter Ø30.0 mm over length 68.0 mm (from Z=0.0 to Z=68.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01320", "images": ["images/Shaft_01320.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.9 mm and length at least 239.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 206.7 mm (from Z=0.0 to Z=206.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01598", "images": ["images/Shaft_01598.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.2 mm and length at least 244.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 55.1 mm (from Z=0.0 to Z=55.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.0 mm over length 30.9 mm (from Z=0.0 to Z=184.4).\n10. Finish turn diameter Ø55.0 mm over length 57.6 mm (from Z=0.0 to Z=153.5).\n11. Finish turn diameter Ø45.0 mm over length 65.6 mm (from Z=0.0 to Z=95.9).\n12. Finish turn diameter Ø41.1 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02336", "images": ["images/Shaft_02336.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.6 mm and length at least 195.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 159.5 mm (from Z=0.0 to Z=159.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03345", "images": ["images/Shaft_03345.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.0 mm and length at least 199.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 30.1 mm (from Z=0.0 to Z=30.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.7 mm over length 40.6 mm (from Z=0.0 to Z=164.6).\n10. Finish turn diameter Ø51.3 mm over length 35.1 mm (from Z=0.0 to Z=124.0).\n11. Finish turn diameter Ø31.7 mm over length 19.5 mm (from Z=0.0 to Z=88.9).\n12. Finish turn diameter Ø30.0 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04371", "images": ["images/Shaft_04371.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.5 mm and length at least 261.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 106.3 mm (from Z=0.0 to Z=106.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.3 mm over length 44.7 mm (from Z=0.0 to Z=150.4).\n10. Finish turn diameter Ø40.0 mm over length 105.7 mm (from Z=0.0 to Z=105.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00091", "images": ["images/Shaft_00091.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.3 mm and length at least 151.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.3 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.0 mm over length 57.1 mm (from Z=0.0 to Z=79.2).\n9. Finish turn diameter Ø36.3 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02408", "images": ["images/Shaft_02408.png", "detail_png/Shaft_02408_length.png", "detail_png/Shaft_02408_diam.png", "detail_png/Shaft_02408_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.1 mm and length at least 314.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 134.0 mm (from Z=0.0 to Z=134.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 175.5 mm (from Z=0.0 to Z=175.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01923", "images": ["images/Shaft_01923.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.2 mm and length at least 92.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.2 mm over length 21.6 mm (from Z=0.0 to Z=66.5).\n9. Finish turn diameter Ø30.0 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02850", "images": ["images/Shaft_02850.png", "detail_png/Shaft_02850_length.png", "detail_png/Shaft_02850_diam.png", "detail_png/Shaft_02850_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.9 mm and length at least 277.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 186.8 mm (from Z=0.0 to Z=186.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00083", "images": ["images/Shaft_00083.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.7 mm and length at least 77.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.7 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.5 mm over length 19.6 mm (from Z=0.0 to Z=61.8).\n9. Finish turn diameter Ø47.4 mm over length 26.1 mm (from Z=0.0 to Z=42.2).\n10. Finish turn diameter Ø30.0 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04329", "images": ["images/Shaft_04329.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.5 mm and length at least 225.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.2 mm over length 56.1 mm (from Z=0.0 to Z=136.8).\n10. Finish turn diameter Ø30.0 mm over length 80.7 mm (from Z=0.0 to Z=80.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01725", "images": ["images/Shaft_01725.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.5 mm and length at least 317.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 127.0 mm (from Z=0.0 to Z=127.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.0 mm over length 81.8 mm (from Z=0.0 to Z=185.8).\n10. Finish turn diameter Ø47.4 mm over length 104.0 mm (from Z=0.0 to Z=104.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04481", "images": ["images/Shaft_04481.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.0 mm and length at least 100.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 7.2 mm (from Z=0.0 to Z=7.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.3 mm over length 25.3 mm (from Z=0.0 to Z=88.4).\n9. Finish turn diameter Ø43.6 mm over length 32.7 mm (from Z=0.0 to Z=63.1).\n10. Finish turn diameter Ø38.3 mm over length 13.9 mm (from Z=0.0 to Z=30.4).\n11. Finish turn diameter Ø30.0 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03833", "images": ["images/Shaft_03833.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.8 mm and length at least 99.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.8 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.0 mm over length 23.4 mm (from Z=0.0 to Z=75.3).\n9. Finish turn diameter Ø30.0 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04685", "images": ["images/Shaft_04685.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.4 mm and length at least 276.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 231.3 mm (from Z=0.0 to Z=231.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02694", "images": ["images/Shaft_02694.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.5 mm and length at least 296.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 77.0 mm (from Z=0.0 to Z=77.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.9 mm over length 24.2 mm (from Z=0.0 to Z=214.0).\n10. Finish turn diameter Ø46.1 mm over length 63.9 mm (from Z=0.0 to Z=189.8).\n11. Finish turn diameter Ø30.2 mm over length 63.1 mm (from Z=0.0 to Z=125.9).\n12. Finish turn diameter Ø30.0 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01887", "images": ["images/Shaft_01887.png", "detail_png/Shaft_01887_length.png", "detail_png/Shaft_01887_diam.png", "detail_png/Shaft_01887_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.9 mm and length at least 90.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.4 mm over length 42.7 mm (from Z=0.0 to Z=59.7).\n9. Finish turn diameter Ø30.0 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04448", "images": ["images/Shaft_04448.png", "detail_png/Shaft_04448_length.png", "detail_png/Shaft_04448_diam.png", "detail_png/Shaft_04448_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.5 mm and length at least 320.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 133.3 mm (from Z=0.0 to Z=133.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 37.6 mm (from Z=0.0 to Z=182.6).\n10. Finish turn diameter Ø30.0 mm over length 145.0 mm (from Z=0.0 to Z=145.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01335", "images": ["images/Shaft_01335.png", "detail_png/Shaft_01335_length.png", "detail_png/Shaft_01335_diam.png", "detail_png/Shaft_01335_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø38.4 mm and length at least 154.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.0 mm (from Z=0.0 to Z=136.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03914", "images": ["images/Shaft_03914.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.7 mm and length at least 313.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.7 mm over length 103.8 mm (from Z=0.0 to Z=103.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.6 mm (from Z=0.0 to Z=204.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00080", "images": ["images/Shaft_00080.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.8 mm and length at least 269.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 72.3 mm (from Z=0.0 to Z=72.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.4 mm over length 58.2 mm (from Z=0.0 to Z=192.6).\n10. Finish turn diameter Ø43.7 mm over length 69.7 mm (from Z=0.0 to Z=134.4).\n11. Finish turn diameter Ø35.2 mm over length 13.1 mm (from Z=0.0 to Z=64.7).\n12. Finish turn diameter Ø30.0 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04402", "images": ["images/Shaft_04402.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.5 mm and length at least 153.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.9 mm over length 36.0 mm (from Z=0.0 to Z=113.9).\n9. Finish turn diameter Ø30.0 mm over length 77.9 mm (from Z=0.0 to Z=77.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01382", "images": ["images/Shaft_01382.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.1 mm and length at least 298.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 248.5 mm (from Z=0.0 to Z=248.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00468", "images": ["images/Shaft_00468.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 153.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 115.9 mm (from Z=0.0 to Z=115.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01248", "images": ["images/Shaft_01248.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.4 mm and length at least 127.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00268", "images": ["images/Shaft_00268.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.4 mm and length at least 196.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 66.9 mm (from Z=0.0 to Z=66.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03642", "images": ["images/Shaft_03642.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.7 mm and length at least 154.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 134.8 mm (from Z=0.0 to Z=134.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00347", "images": ["images/Shaft_00347.png", "detail_png/Shaft_00347_length.png", "detail_png/Shaft_00347_diam.png", "detail_png/Shaft_00347_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.4 mm and length at least 102.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.7 mm over length 52.4 mm (from Z=0.0 to Z=77.1).\n9. Finish turn diameter Ø49.7 mm over length 9.2 mm (from Z=0.0 to Z=24.7).\n10. Finish turn diameter Ø30.8 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02427", "images": ["images/Shaft_02427.png", "detail_png/Shaft_02427_length.png", "detail_png/Shaft_02427_diam.png", "detail_png/Shaft_02427_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.5 mm and length at least 311.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.3 mm over length 40.7 mm (from Z=0.0 to Z=254.4).\n10. Finish turn diameter Ø39.8 mm over length 49.3 mm (from Z=0.0 to Z=213.7).\n11. Finish turn diameter Ø30.4 mm over length 39.6 mm (from Z=0.0 to Z=164.4).\n12. Finish turn diameter Ø30.0 mm over length 124.8 mm (from Z=0.0 to Z=124.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01278", "images": ["images/Shaft_01278.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.1 mm and length at least 79.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.7 mm over length 5.5 mm (from Z=0.0 to Z=59.3).\n9. Finish turn diameter Ø38.3 mm over length 11.7 mm (from Z=0.0 to Z=53.8).\n10. Finish turn diameter Ø30.0 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02654", "images": ["images/Shaft_02654.png", "detail_png/Shaft_02654_length.png", "detail_png/Shaft_02654_diam.png", "detail_png/Shaft_02654_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 232.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 212.5 mm (from Z=0.0 to Z=212.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.5 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00961", "images": ["images/Shaft_00961.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.7 mm and length at least 189.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 150.1 mm (from Z=0.0 to Z=150.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01014", "images": ["images/Shaft_01014.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.9 mm and length at least 320.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.6 mm over length 39.1 mm (from Z=0.0 to Z=268.1).\n10. Finish turn diameter Ø57.9 mm over length 229.0 mm (from Z=0.0 to Z=229.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01000", "images": ["images/Shaft_01000.png", "detail_png/Shaft_01000_length.png", "detail_png/Shaft_01000_diam.png", "detail_png/Shaft_01000_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.9 mm and length at least 72.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.9 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.8 mm over length 10.8 mm (from Z=0.0 to Z=55.2).\n9. Finish turn diameter Ø38.0 mm over length 11.4 mm (from Z=0.0 to Z=44.4).\n10. Finish turn diameter Ø30.0 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02708", "images": ["images/Shaft_02708.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.8 mm and length at least 187.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.8 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.5 mm over length 49.0 mm (from Z=0.0 to Z=146.0).\n9. Finish turn diameter Ø65.1 mm over length 17.8 mm (from Z=0.0 to Z=97.0).\n10. Finish turn diameter Ø57.6 mm over length 54.6 mm (from Z=0.0 to Z=79.2).\n11. Finish turn diameter Ø41.3 mm over length 7.7 mm (from Z=0.0 to Z=24.6).\n12. Finish turn diameter Ø36.5 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00231", "images": ["images/Shaft_00231.png", "detail_png/Shaft_00231_length.png", "detail_png/Shaft_00231_diam.png", "detail_png/Shaft_00231_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.3 mm and length at least 136.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.8 mm over length 27.2 mm (from Z=0.0 to Z=112.1).\n9. Finish turn diameter Ø43.0 mm over length 6.4 mm (from Z=0.0 to Z=84.9).\n10. Finish turn diameter Ø30.0 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04958", "images": ["images/Shaft_04958.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.7 mm and length at least 158.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.2 mm over length 5.7 mm (from Z=0.0 to Z=114.0).\n9. Finish turn diameter Ø41.2 mm over length 25.2 mm (from Z=0.0 to Z=108.3).\n10. Finish turn diameter Ø30.0 mm over length 83.1 mm (from Z=0.0 to Z=83.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03699", "images": ["images/Shaft_03699.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.4 mm and length at least 286.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.1 mm over length 37.4 mm (from Z=0.0 to Z=246.7).\n10. Finish turn diameter Ø30.0 mm over length 209.3 mm (from Z=0.0 to Z=209.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03751", "images": ["images/Shaft_03751.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.5 mm and length at least 285.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.5 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 251.3 mm (from Z=0.0 to Z=251.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01413", "images": ["images/Shaft_01413.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.4 mm and length at least 90.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.4 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.7 mm over length 21.6 mm (from Z=0.0 to Z=53.0).\n9. Finish turn diameter Ø39.5 mm over length 31.4 mm (from Z=0.0 to Z=31.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01753", "images": ["images/Shaft_01753.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.1 mm and length at least 276.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 78.0 mm (from Z=0.0 to Z=230.7).\n10. Finish turn diameter Ø30.5 mm over length 110.4 mm (from Z=0.0 to Z=152.7).\n11. Finish turn diameter Ø30.0 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00398", "images": ["images/Shaft_00398.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.5 mm and length at least 188.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø73.7 mm over length 31.2 mm (from Z=0.0 to Z=170.8).\n9. Finish turn diameter Ø66.3 mm over length 31.4 mm (from Z=0.0 to Z=139.6).\n10. Finish turn diameter Ø62.7 mm over length 108.2 mm (from Z=0.0 to Z=108.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04892", "images": ["images/Shaft_04892.png", "detail_png/Shaft_04892_length.png", "detail_png/Shaft_04892_diam.png", "detail_png/Shaft_04892_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.6 mm and length at least 175.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 61.5 mm (from Z=0.0 to Z=102.3).\n9. Finish turn diameter Ø42.9 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01397", "images": ["images/Shaft_01397.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.0 mm and length at least 134.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.0 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 84.2 mm (from Z=0.0 to Z=84.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02560", "images": ["images/Shaft_02560.png", "detail_png/Shaft_02560_length.png", "detail_png/Shaft_02560_diam.png", "detail_png/Shaft_02560_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.4 mm and length at least 113.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 93.2 mm (from Z=0.0 to Z=93.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03134", "images": ["images/Shaft_03134.png", "detail_png/Shaft_03134_length.png", "detail_png/Shaft_03134_diam.png", "detail_png/Shaft_03134_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.5 mm and length at least 227.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 54.0 mm (from Z=0.0 to Z=54.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 41.8 mm (from Z=0.0 to Z=168.8).\n10. Finish turn diameter Ø42.9 mm over length 54.1 mm (from Z=0.0 to Z=127.0).\n11. Finish turn diameter Ø39.2 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00110", "images": ["images/Shaft_00110.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.2 mm and length at least 283.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 63.3 mm (from Z=0.0 to Z=63.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 151.7 mm (from Z=0.0 to Z=214.8).\n10. Finish turn diameter Ø48.2 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02391", "images": ["images/Shaft_02391.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.0 mm and length at least 151.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 7.3 mm (from Z=0.0 to Z=114.8).\n9. Finish turn diameter Ø37.4 mm over length 45.5 mm (from Z=0.0 to Z=107.5).\n10. Finish turn diameter Ø30.0 mm over length 62.0 mm (from Z=0.0 to Z=62.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03039", "images": ["images/Shaft_03039.png", "detail_png/Shaft_03039_length.png", "detail_png/Shaft_03039_diam.png", "detail_png/Shaft_03039_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.3 mm and length at least 201.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.3 mm over length 38.8 mm (from Z=0.0 to Z=92.2).\n10. Finish turn diameter Ø43.4 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03395", "images": ["images/Shaft_03395.png", "detail_png/Shaft_03395_length.png", "detail_png/Shaft_03395_diam.png", "detail_png/Shaft_03395_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.1 mm and length at least 175.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 49.2 mm (from Z=0.0 to Z=49.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 33.6 mm (from Z=0.0 to Z=121.6).\n9. Finish turn diameter Ø37.9 mm over length 41.8 mm (from Z=0.0 to Z=88.0).\n10. Finish turn diameter Ø30.0 mm over length 46.2 mm (from Z=0.0 to Z=46.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01428", "images": ["images/Shaft_01428.png", "detail_png/Shaft_01428_length.png", "detail_png/Shaft_01428_diam.png", "detail_png/Shaft_01428_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.7 mm and length at least 141.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 28.2 mm (from Z=0.0 to Z=94.2).\n9. Finish turn diameter Ø51.2 mm over length 37.1 mm (from Z=0.0 to Z=66.0).\n10. Finish turn diameter Ø40.3 mm over length 19.5 mm (from Z=0.0 to Z=28.9).\n11. Finish turn diameter Ø34.9 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01500", "images": ["images/Shaft_01500.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.1 mm and length at least 224.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 72.2 mm (from Z=0.0 to Z=72.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.9 mm over length 19.6 mm (from Z=0.0 to Z=147.6).\n10. Finish turn diameter Ø64.9 mm over length 17.9 mm (from Z=0.0 to Z=128.0).\n11. Finish turn diameter Ø55.6 mm over length 46.2 mm (from Z=0.0 to Z=110.1).\n12. Finish turn diameter Ø36.8 mm over length 63.9 mm (from Z=0.0 to Z=63.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00525", "images": ["images/Shaft_00525.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.9 mm and length at least 90.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04865", "images": ["images/Shaft_04865.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.5 mm and length at least 286.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 240.7 mm (from Z=0.0 to Z=240.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03481", "images": ["images/Shaft_03481.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.2 mm and length at least 224.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.2 mm over length 57.4 mm (from Z=0.0 to Z=200.1).\n10. Finish turn diameter Ø46.0 mm over length 53.6 mm (from Z=0.0 to Z=142.7).\n11. Finish turn diameter Ø30.0 mm over length 89.1 mm (from Z=0.0 to Z=89.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00115", "images": ["images/Shaft_00115.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.8 mm and length at least 147.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 27.3 mm (from Z=0.0 to Z=27.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.5 mm over length 25.0 mm (from Z=0.0 to Z=115.6).\n9. Finish turn diameter Ø33.3 mm over length 31.5 mm (from Z=0.0 to Z=90.6).\n10. Finish turn diameter Ø30.0 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00251", "images": ["images/Shaft_00251.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.0 mm and length at least 304.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.0 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.5 mm over length 52.3 mm (from Z=0.0 to Z=244.9).\n10. Finish turn diameter Ø45.1 mm over length 35.4 mm (from Z=0.0 to Z=192.6).\n11. Finish turn diameter Ø37.4 mm over length 84.3 mm (from Z=0.0 to Z=157.2).\n12. Finish turn diameter Ø30.0 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01312", "images": ["images/Shaft_01312.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.1 mm and length at least 300.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.0 mm over length 118.7 mm (from Z=0.0 to Z=252.5).\n10. Finish turn diameter Ø30.0 mm over length 133.8 mm (from Z=0.0 to Z=133.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04284", "images": ["images/Shaft_04284.png", "detail_png/Shaft_04284_length.png", "detail_png/Shaft_04284_diam.png", "detail_png/Shaft_04284_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.6 mm and length at least 82.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03734", "images": ["images/Shaft_03734.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.6 mm and length at least 144.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.4 mm over length 30.9 mm (from Z=0.0 to Z=115.7).\n9. Finish turn diameter Ø61.1 mm over length 24.6 mm (from Z=0.0 to Z=84.8).\n10. Finish turn diameter Ø43.5 mm over length 19.0 mm (from Z=0.0 to Z=60.2).\n11. Finish turn diameter Ø30.0 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04282", "images": ["images/Shaft_04282.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.5 mm and length at least 295.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 60.0 mm (from Z=0.0 to Z=249.3).\n10. Finish turn diameter Ø33.8 mm over length 47.9 mm (from Z=0.0 to Z=189.3).\n11. Finish turn diameter Ø30.0 mm over length 141.4 mm (from Z=0.0 to Z=141.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02770", "images": ["images/Shaft_02770.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 292.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 211.3 mm (from Z=0.0 to Z=211.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 76.2 mm (from Z=0.0 to Z=76.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02526", "images": ["images/Shaft_02526.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.4 mm and length at least 286.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 73.3 mm (from Z=0.0 to Z=73.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 207.9 mm (from Z=0.0 to Z=207.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01547", "images": ["images/Shaft_01547.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.2 mm and length at least 115.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.2 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.9 mm over length 24.1 mm (from Z=0.0 to Z=86.5).\n9. Finish turn diameter Ø41.7 mm over length 17.4 mm (from Z=0.0 to Z=62.4).\n10. Finish turn diameter Ø34.5 mm over length 18.3 mm (from Z=0.0 to Z=45.0).\n11. Finish turn diameter Ø30.0 mm over length 26.7 mm (from Z=0.0 to Z=26.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02420", "images": ["images/Shaft_02420.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.1 mm and length at least 265.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.8 mm over length 25.5 mm (from Z=0.0 to Z=207.0).\n10. Finish turn diameter Ø41.7 mm over length 99.9 mm (from Z=0.0 to Z=181.5).\n11. Finish turn diameter Ø34.0 mm over length 38.8 mm (from Z=0.0 to Z=81.6).\n12. Finish turn diameter Ø30.0 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02026", "images": ["images/Shaft_02026.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.0 mm and length at least 216.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.0 mm over length 42.6 mm (from Z=0.0 to Z=170.4).\n10. Finish turn diameter Ø58.9 mm over length 34.4 mm (from Z=0.0 to Z=127.8).\n11. Finish turn diameter Ø53.7 mm over length 18.4 mm (from Z=0.0 to Z=93.4).\n12. Finish turn diameter Ø38.9 mm over length 36.3 mm (from Z=0.0 to Z=75.0).\n13. Finish turn diameter Ø30.0 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01078", "images": ["images/Shaft_01078.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.0 mm and length at least 75.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 14.1 mm (from Z=0.0 to Z=57.2).\n9. Finish turn diameter Ø47.6 mm over length 11.5 mm (from Z=0.0 to Z=43.1).\n10. Finish turn diameter Ø39.7 mm over length 15.6 mm (from Z=0.0 to Z=31.6).\n11. Finish turn diameter Ø30.2 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01603", "images": ["images/Shaft_01603.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.9 mm and length at least 183.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.7 mm over length 60.1 mm (from Z=0.0 to Z=158.0).\n9. Finish turn diameter Ø42.9 mm over length 23.0 mm (from Z=0.0 to Z=97.9).\n10. Finish turn diameter Ø30.7 mm over length 36.9 mm (from Z=0.0 to Z=74.9).\n11. Finish turn diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00228", "images": ["images/Shaft_00228.png", "detail_png/Shaft_00228_length.png", "detail_png/Shaft_00228_diam.png", "detail_png/Shaft_00228_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.3 mm and length at least 126.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.5 mm over length 47.2 mm (from Z=0.0 to Z=94.9).\n9. Finish turn diameter Ø30.3 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04489", "images": ["images/Shaft_04489.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.0 mm and length at least 169.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.4 mm over length 50.2 mm (from Z=0.0 to Z=135.7).\n9. Finish turn diameter Ø30.0 mm over length 85.5 mm (from Z=0.0 to Z=85.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04629", "images": ["images/Shaft_04629.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.2 mm and length at least 98.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.2 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02302", "images": ["images/Shaft_02302.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.3 mm and length at least 306.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 47.9 mm (from Z=0.0 to Z=47.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 253.1 mm (from Z=0.0 to Z=253.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03771", "images": ["images/Shaft_03771.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.6 mm and length at least 76.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.6 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01924", "images": ["images/Shaft_01924.png", "detail_png/Shaft_01924_length.png", "detail_png/Shaft_01924_diam.png", "detail_png/Shaft_01924_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.8 mm and length at least 314.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 129.0 mm (from Z=0.0 to Z=129.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.0 mm over length 61.9 mm (from Z=0.0 to Z=180.5).\n10. Finish turn diameter Ø30.0 mm over length 118.6 mm (from Z=0.0 to Z=118.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02343", "images": ["images/Shaft_02343.png", "detail_png/Shaft_02343_length.png", "detail_png/Shaft_02343_diam.png", "detail_png/Shaft_02343_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.3 mm and length at least 94.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.5 mm over length 6.8 mm (from Z=0.0 to Z=76.0).\n9. Finish turn diameter Ø30.0 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04230", "images": ["images/Shaft_04230.png", "detail_png/Shaft_04230_length.png", "detail_png/Shaft_04230_diam.png", "detail_png/Shaft_04230_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.7 mm and length at least 125.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 5.0 mm (from Z=0.0 to Z=85.7).\n9. Finish turn diameter Ø44.3 mm over length 20.1 mm (from Z=0.0 to Z=80.7).\n10. Finish turn diameter Ø30.0 mm over length 60.6 mm (from Z=0.0 to Z=60.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03716", "images": ["images/Shaft_03716.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 290.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.0 mm (from Z=0.0 to Z=202.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.7 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03510", "images": ["images/Shaft_03510.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.3 mm and length at least 100.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.1 mm over length 5.6 mm (from Z=0.0 to Z=67.7).\n9. Finish turn diameter Ø40.5 mm over length 35.0 mm (from Z=0.0 to Z=62.1).\n10. Finish turn diameter Ø30.0 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02703", "images": ["images/Shaft_02703.png", "detail_png/Shaft_02703_length.png", "detail_png/Shaft_02703_diam.png", "detail_png/Shaft_02703_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.0 mm and length at least 300.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 166.2 mm (from Z=0.0 to Z=166.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.4 mm over length 29.6 mm (from Z=0.0 to Z=129.5).\n10. Finish turn diameter Ø30.0 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03823", "images": ["images/Shaft_03823.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.4 mm and length at least 151.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.4 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.0 mm over length 63.1 mm (from Z=0.0 to Z=101.6).\n9. Finish turn diameter Ø33.6 mm over length 7.0 mm (from Z=0.0 to Z=38.5).\n10. Finish turn diameter Ø30.0 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04520", "images": ["images/Shaft_04520.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 170.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 133.4 mm (from Z=0.0 to Z=133.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 32.3 mm (from Z=0.0 to Z=32.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02330", "images": ["images/Shaft_02330.png", "detail_png/Shaft_02330_length.png", "detail_png/Shaft_02330_diam.png", "detail_png/Shaft_02330_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.0 mm and length at least 314.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 120.3 mm (from Z=0.0 to Z=120.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.1 mm over length 99.4 mm (from Z=0.0 to Z=189.6).\n10. Finish turn diameter Ø30.0 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00448", "images": ["images/Shaft_00448.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 224.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 171.4 mm (from Z=0.0 to Z=171.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 47.9 mm (from Z=0.0 to Z=47.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04944", "images": ["images/Shaft_04944.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.5 mm and length at least 76.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.4 mm over length 5.1 mm (from Z=0.0 to Z=46.9).\n9. Finish turn diameter Ø30.4 mm over length 15.5 mm (from Z=0.0 to Z=41.8).\n10. Finish turn diameter Ø30.0 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04762", "images": ["images/Shaft_04762.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.3 mm and length at least 225.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.6 mm over length 23.1 mm (from Z=0.0 to Z=167.2).\n10. Finish turn diameter Ø59.9 mm over length 77.3 mm (from Z=0.0 to Z=144.1).\n11. Finish turn diameter Ø43.2 mm over length 66.8 mm (from Z=0.0 to Z=66.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01593", "images": ["images/Shaft_01593.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.9 mm and length at least 232.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 11.0 mm (from Z=0.0 to Z=164.1).\n10. Finish turn diameter Ø30.0 mm over length 153.1 mm (from Z=0.0 to Z=153.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04355", "images": ["images/Shaft_04355.png", "detail_png/Shaft_04355_length.png", "detail_png/Shaft_04355_diam.png", "detail_png/Shaft_04355_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.7 mm and length at least 90.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.7 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.7 mm over length 5.7 mm (from Z=0.0 to Z=66.1).\n9. Finish turn diameter Ø63.1 mm over length 20.7 mm (from Z=0.0 to Z=60.4).\n10. Finish turn diameter Ø59.0 mm over length 26.5 mm (from Z=0.0 to Z=39.7).\n11. Finish turn diameter Ø47.2 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01279", "images": ["images/Shaft_01279.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 271.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 214.9 mm (from Z=0.0 to Z=214.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00550", "images": ["images/Shaft_00550.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.7 mm and length at least 127.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.7 mm over length 35.6 mm (from Z=0.0 to Z=35.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 86.6 mm (from Z=0.0 to Z=86.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01764", "images": ["images/Shaft_01764.png", "detail_png/Shaft_01764_length.png", "detail_png/Shaft_01764_diam.png", "detail_png/Shaft_01764_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.9 mm and length at least 183.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.9 mm over length 48.9 mm (from Z=0.0 to Z=130.0).\n9. Finish turn diameter Ø35.1 mm over length 55.2 mm (from Z=0.0 to Z=81.1).\n10. Finish turn diameter Ø30.0 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03495", "images": ["images/Shaft_03495.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.2 mm and length at least 231.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.1 mm over length 29.0 mm (from Z=0.0 to Z=163.9).\n10. Finish turn diameter Ø44.4 mm over length 26.2 mm (from Z=0.0 to Z=134.9).\n11. Finish turn diameter Ø35.6 mm over length 54.3 mm (from Z=0.0 to Z=108.7).\n12. Finish turn diameter Ø30.0 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00672", "images": ["images/Shaft_00672.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.3 mm and length at least 108.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.3 mm over length 8.5 mm (from Z=0.0 to Z=58.9).\n9. Finish turn diameter Ø30.0 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02892", "images": ["images/Shaft_02892.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.9 mm and length at least 171.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.2 mm over length 56.6 mm (from Z=0.0 to Z=104.8).\n9. Finish turn diameter Ø30.0 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04441", "images": ["images/Shaft_04441.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.1 mm and length at least 72.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.8 mm over length 31.9 mm (from Z=0.0 to Z=56.5).\n9. Finish turn diameter Ø39.0 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03192", "images": ["images/Shaft_03192.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.1 mm and length at least 249.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 53.9 mm (from Z=0.0 to Z=53.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.9 mm (from Z=0.0 to Z=190.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02700", "images": ["images/Shaft_02700.png", "detail_png/Shaft_02700_length.png", "detail_png/Shaft_02700_diam.png", "detail_png/Shaft_02700_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.3 mm and length at least 267.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 79.1 mm (from Z=0.0 to Z=79.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 183.2 mm (from Z=0.0 to Z=183.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02280", "images": ["images/Shaft_02280.png", "detail_png/Shaft_02280_length.png", "detail_png/Shaft_02280_diam.png", "detail_png/Shaft_02280_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.4 mm and length at least 282.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.4 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.2 mm over length 23.5 mm (from Z=0.0 to Z=227.3).\n10. Finish turn diameter Ø30.0 mm over length 203.8 mm (from Z=0.0 to Z=203.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04627", "images": ["images/Shaft_04627.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 106.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03621", "images": ["images/Shaft_03621.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.8 mm and length at least 115.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.8 mm over length 28.2 mm (from Z=0.0 to Z=28.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.5 mm over length 16.3 mm (from Z=0.0 to Z=82.4).\n9. Finish turn diameter Ø46.4 mm over length 17.4 mm (from Z=0.0 to Z=66.1).\n10. Finish turn diameter Ø39.0 mm over length 27.0 mm (from Z=0.0 to Z=48.7).\n11. Finish turn diameter Ø30.9 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00147", "images": ["images/Shaft_00147.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.2 mm and length at least 156.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 35.4 mm (from Z=0.0 to Z=108.4).\n9. Finish turn diameter Ø57.0 mm over length 73.0 mm (from Z=0.0 to Z=73.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01882", "images": ["images/Shaft_01882.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.9 mm and length at least 206.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 146.7 mm (from Z=0.0 to Z=146.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03871", "images": ["images/Shaft_03871.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.0 mm and length at least 161.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.0 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 139.6 mm (from Z=0.0 to Z=139.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04681", "images": ["images/Shaft_04681.png", "detail_png/Shaft_04681_length.png", "detail_png/Shaft_04681_diam.png", "detail_png/Shaft_04681_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.2 mm and length at least 212.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.4 mm over length 23.6 mm (from Z=0.0 to Z=162.3).\n10. Finish turn diameter Ø30.0 mm over length 138.7 mm (from Z=0.0 to Z=138.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01288", "images": ["images/Shaft_01288.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 187.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 35.6 mm (from Z=0.0 to Z=35.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.5 mm over length 24.9 mm (from Z=0.0 to Z=146.9).\n9. Finish turn diameter Ø61.8 mm over length 12.9 mm (from Z=0.0 to Z=122.0).\n10. Finish turn diameter Ø45.2 mm over length 53.1 mm (from Z=0.0 to Z=109.1).\n11. Finish turn diameter Ø30.0 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01843", "images": ["images/Shaft_01843.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 253.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 227.3 mm (from Z=0.0 to Z=227.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01571", "images": ["images/Shaft_01571.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.4 mm and length at least 85.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03614", "images": ["images/Shaft_03614.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.2 mm and length at least 153.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.7 mm over length 7.0 mm (from Z=0.0 to Z=117.6).\n10. Finish turn diameter Ø30.0 mm over length 110.6 mm (from Z=0.0 to Z=110.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01762", "images": ["images/Shaft_01762.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.6 mm and length at least 250.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.4 mm over length 11.2 mm (from Z=0.0 to Z=177.5).\n10. Finish turn diameter Ø46.0 mm over length 40.2 mm (from Z=0.0 to Z=166.3).\n11. Finish turn diameter Ø36.5 mm over length 33.1 mm (from Z=0.0 to Z=126.1).\n12. Finish turn diameter Ø31.7 mm over length 16.5 mm (from Z=0.0 to Z=93.0).\n13. Finish turn diameter Ø30.0 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00129", "images": ["images/Shaft_00129.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.0 mm and length at least 213.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.0 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 187.2 mm (from Z=0.0 to Z=187.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04539", "images": ["images/Shaft_04539.png", "detail_png/Shaft_04539_length.png", "detail_png/Shaft_04539_diam.png", "detail_png/Shaft_04539_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.7 mm and length at least 158.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.2 mm over length 60.7 mm (from Z=0.0 to Z=126.4).\n9. Finish turn diameter Ø35.6 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00072", "images": ["images/Shaft_00072.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.9 mm and length at least 122.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.3 mm over length 34.1 mm (from Z=0.0 to Z=88.3).\n9. Finish turn diameter Ø47.1 mm over length 15.4 mm (from Z=0.0 to Z=54.2).\n10. Finish turn diameter Ø30.9 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02238", "images": ["images/Shaft_02238.png", "detail_png/Shaft_02238_length.png", "detail_png/Shaft_02238_diam.png", "detail_png/Shaft_02238_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 139.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 110.6 mm (from Z=0.0 to Z=110.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04529", "images": ["images/Shaft_04529.png", "detail_png/Shaft_04529_length.png", "detail_png/Shaft_04529_diam.png", "detail_png/Shaft_04529_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.1 mm and length at least 293.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 210.9 mm (from Z=0.0 to Z=210.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03315", "images": ["images/Shaft_03315.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.3 mm and length at least 287.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.4 mm over length 81.4 mm (from Z=0.0 to Z=195.9).\n10. Finish turn diameter Ø34.8 mm over length 46.2 mm (from Z=0.0 to Z=114.5).\n11. Finish turn diameter Ø30.0 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01407", "images": ["images/Shaft_01407.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.6 mm and length at least 113.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02221", "images": ["images/Shaft_02221.png", "detail_png/Shaft_02221_length.png", "detail_png/Shaft_02221_diam.png", "detail_png/Shaft_02221_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.0 mm and length at least 224.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.0 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.9 mm over length 88.9 mm (from Z=0.0 to Z=191.1).\n10. Finish turn diameter Ø52.7 mm over length 102.2 mm (from Z=0.0 to Z=102.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01071", "images": ["images/Shaft_01071.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.4 mm and length at least 305.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.4 mm over length 111.6 mm (from Z=0.0 to Z=111.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 68.5 mm (from Z=0.0 to Z=188.4).\n10. Finish turn diameter Ø30.0 mm over length 119.9 mm (from Z=0.0 to Z=119.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02067", "images": ["images/Shaft_02067.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.2 mm and length at least 108.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 45.7 mm (from Z=0.0 to Z=76.7).\n9. Finish turn diameter Ø34.6 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03905", "images": ["images/Shaft_03905.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.6 mm and length at least 138.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 27.6 mm (from Z=0.0 to Z=126.6).\n10. Finish turn diameter Ø30.0 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02039", "images": ["images/Shaft_02039.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.9 mm and length at least 288.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 58.7 mm (from Z=0.0 to Z=58.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 75.7 mm (from Z=0.0 to Z=225.2).\n10. Finish turn diameter Ø34.3 mm over length 72.6 mm (from Z=0.0 to Z=149.5).\n11. Finish turn diameter Ø30.0 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02711", "images": ["images/Shaft_02711.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.9 mm and length at least 149.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.1 mm over length 15.4 mm (from Z=0.0 to Z=110.1).\n9. Finish turn diameter Ø60.3 mm over length 31.8 mm (from Z=0.0 to Z=94.7).\n10. Finish turn diameter Ø41.1 mm over length 15.7 mm (from Z=0.0 to Z=62.9).\n11. Finish turn diameter Ø33.1 mm over length 14.0 mm (from Z=0.0 to Z=47.2).\n12. Finish turn diameter Ø30.0 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01202", "images": ["images/Shaft_01202.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.2 mm and length at least 167.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.7 mm over length 27.9 mm (from Z=0.0 to Z=126.5).\n9. Finish turn diameter Ø51.3 mm over length 9.5 mm (from Z=0.0 to Z=98.6).\n10. Finish turn diameter Ø39.8 mm over length 39.7 mm (from Z=0.0 to Z=89.1).\n11. Finish turn diameter Ø36.4 mm over length 43.8 mm (from Z=0.0 to Z=49.4).\n12. Finish turn diameter Ø30.0 mm over length 5.6 mm (from Z=0.0 to Z=5.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00827", "images": ["images/Shaft_00827.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 123.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.1 mm over length 38.9 mm (from Z=0.0 to Z=38.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04693", "images": ["images/Shaft_04693.png", "detail_png/Shaft_04693_length.png", "detail_png/Shaft_04693_diam.png", "detail_png/Shaft_04693_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.3 mm and length at least 197.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.3 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 147.9 mm (from Z=0.0 to Z=147.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03247", "images": ["images/Shaft_03247.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.7 mm and length at least 197.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.7 mm over length 31.4 mm (from Z=0.0 to Z=169.7).\n10. Finish turn diameter Ø30.0 mm over length 138.3 mm (from Z=0.0 to Z=138.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02016", "images": ["images/Shaft_02016.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.3 mm and length at least 202.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.1 mm over length 39.7 mm (from Z=0.0 to Z=175.4).\n10. Finish turn diameter Ø30.0 mm over length 135.7 mm (from Z=0.0 to Z=135.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03143", "images": ["images/Shaft_03143.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.0 mm and length at least 122.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.0 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 94.9 mm (from Z=0.0 to Z=94.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02129", "images": ["images/Shaft_02129.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.9 mm and length at least 74.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 25.3 mm (from Z=0.0 to Z=25.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.0 mm over length 5.9 mm (from Z=0.0 to Z=43.8).\n9. Finish turn diameter Ø55.3 mm over length 28.7 mm (from Z=0.0 to Z=37.9).\n10. Finish turn diameter Ø38.4 mm over length 9.2 mm (from Z=0.0 to Z=9.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03078", "images": ["images/Shaft_03078.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.1 mm and length at least 227.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 81.6 mm (from Z=0.0 to Z=81.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 67.1 mm (from Z=0.0 to Z=140.6).\n10. Finish turn diameter Ø48.9 mm over length 41.1 mm (from Z=0.0 to Z=73.5).\n11. Finish turn diameter Ø37.6 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04956", "images": ["images/Shaft_04956.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.8 mm and length at least 85.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 10.8 mm (from Z=0.0 to Z=10.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.3 mm over length 25.5 mm (from Z=0.0 to Z=69.9).\n9. Finish turn diameter Ø30.0 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00313", "images": ["images/Shaft_00313.png", "detail_png/Shaft_00313_length.png", "detail_png/Shaft_00313_diam.png", "detail_png/Shaft_00313_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.8 mm and length at least 84.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 8.4 mm (from Z=0.0 to Z=43.8).\n9. Finish turn diameter Ø34.8 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03113", "images": ["images/Shaft_03113.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.6 mm and length at least 107.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 26.5 mm (from Z=0.0 to Z=26.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 19.2 mm (from Z=0.0 to Z=76.1).\n9. Finish turn diameter Ø30.9 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00394", "images": ["images/Shaft_00394.png", "detail_png/Shaft_00394_length.png", "detail_png/Shaft_00394_diam.png", "detail_png/Shaft_00394_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.4 mm and length at least 227.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.4 mm over length 114.1 mm (from Z=0.0 to Z=114.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.4 mm over length 46.8 mm (from Z=0.0 to Z=108.3).\n10. Finish turn diameter Ø30.0 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02552", "images": ["images/Shaft_02552.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.8 mm and length at least 184.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.9 mm (from Z=0.0 to Z=105.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04920", "images": ["images/Shaft_04920.png", "detail_png/Shaft_04920_length.png", "detail_png/Shaft_04920_diam.png", "detail_png/Shaft_04920_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.1 mm and length at least 172.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.0 mm over length 37.4 mm (from Z=0.0 to Z=150.6).\n10. Finish turn diameter Ø30.0 mm over length 113.2 mm (from Z=0.0 to Z=113.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01240", "images": ["images/Shaft_01240.png", "detail_png/Shaft_01240_length.png", "detail_png/Shaft_01240_diam.png", "detail_png/Shaft_01240_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.8 mm and length at least 286.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 91.8 mm (from Z=0.0 to Z=91.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.2 mm over length 62.7 mm (from Z=0.0 to Z=189.4).\n10. Finish turn diameter Ø30.0 mm over length 126.7 mm (from Z=0.0 to Z=126.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00625", "images": ["images/Shaft_00625.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 252.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 206.7 mm (from Z=0.0 to Z=206.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.5 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01339", "images": ["images/Shaft_01339.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 197.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 151.7 mm (from Z=0.0 to Z=151.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.6 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02782", "images": ["images/Shaft_02782.png", "detail_png/Shaft_02782_length.png", "detail_png/Shaft_02782_diam.png", "detail_png/Shaft_02782_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.8 mm and length at least 156.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 33.7 mm (from Z=0.0 to Z=33.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.3 mm over length 27.5 mm (from Z=0.0 to Z=118.0).\n9. Finish turn diameter Ø32.2 mm over length 29.5 mm (from Z=0.0 to Z=90.5).\n10. Finish turn diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04905", "images": ["images/Shaft_04905.png", "detail_png/Shaft_04905_length.png", "detail_png/Shaft_04905_diam.png", "detail_png/Shaft_04905_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.6 mm and length at least 279.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.5 mm over length 43.5 mm (from Z=0.0 to Z=250.5).\n10. Finish turn diameter Ø66.9 mm over length 50.4 mm (from Z=0.0 to Z=207.0).\n11. Finish turn diameter Ø53.6 mm over length 50.9 mm (from Z=0.0 to Z=156.6).\n12. Finish turn diameter Ø44.8 mm over length 45.8 mm (from Z=0.0 to Z=105.7).\n13. Finish turn diameter Ø30.4 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01567", "images": ["images/Shaft_01567.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.2 mm and length at least 134.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 5.7 mm (from Z=0.0 to Z=5.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.5 mm over length 61.0 mm (from Z=0.0 to Z=123.9).\n9. Finish turn diameter Ø30.0 mm over length 62.9 mm (from Z=0.0 to Z=62.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00733", "images": ["images/Shaft_00733.png", "detail_png/Shaft_00733_length.png", "detail_png/Shaft_00733_diam.png", "detail_png/Shaft_00733_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.7 mm and length at least 115.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.5 mm over length 13.3 mm (from Z=0.0 to Z=94.7).\n9. Finish turn diameter Ø50.9 mm over length 15.1 mm (from Z=0.0 to Z=81.4).\n10. Finish turn diameter Ø43.7 mm over length 29.7 mm (from Z=0.0 to Z=66.3).\n11. Finish turn diameter Ø30.0 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03810", "images": ["images/Shaft_03810.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.8 mm and length at least 227.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 196.4 mm (from Z=0.0 to Z=196.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03941", "images": ["images/Shaft_03941.png", "detail_png/Shaft_03941_length.png", "detail_png/Shaft_03941_diam.png", "detail_png/Shaft_03941_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.9 mm and length at least 203.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.0 mm over length 75.5 mm (from Z=0.0 to Z=131.7).\n10. Finish turn diameter Ø52.6 mm over length 47.7 mm (from Z=0.0 to Z=56.2).\n11. Finish turn diameter Ø46.7 mm over length 8.5 mm (from Z=0.0 to Z=8.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02040", "images": ["images/Shaft_02040.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.2 mm and length at least 259.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.4 mm over length 73.4 mm (from Z=0.0 to Z=197.9).\n10. Finish turn diameter Ø36.5 mm over length 11.0 mm (from Z=0.0 to Z=124.5).\n11. Finish turn diameter Ø30.0 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03578", "images": ["images/Shaft_03578.png", "detail_png/Shaft_03578_length.png", "detail_png/Shaft_03578_diam.png", "detail_png/Shaft_03578_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.7 mm and length at least 216.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.7 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 167.9 mm (from Z=0.0 to Z=167.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04336", "images": ["images/Shaft_04336.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.8 mm and length at least 157.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.4 mm over length 45.7 mm (from Z=0.0 to Z=130.2).\n9. Finish turn diameter Ø46.1 mm over length 16.3 mm (from Z=0.0 to Z=84.5).\n10. Finish turn diameter Ø36.1 mm over length 43.1 mm (from Z=0.0 to Z=68.2).\n11. Finish turn diameter Ø30.0 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04233", "images": ["images/Shaft_04233.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.9 mm and length at least 257.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 62.0 mm (from Z=0.0 to Z=62.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.9 mm (from Z=0.0 to Z=190.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03022", "images": ["images/Shaft_03022.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.7 mm and length at least 231.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.7 mm over length 36.4 mm (from Z=0.0 to Z=36.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.2 mm over length 49.7 mm (from Z=0.0 to Z=190.1).\n10. Finish turn diameter Ø56.1 mm over length 9.4 mm (from Z=0.0 to Z=140.4).\n11. Finish turn diameter Ø46.6 mm over length 78.0 mm (from Z=0.0 to Z=131.0).\n12. Finish turn diameter Ø33.7 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00407", "images": ["images/Shaft_00407.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.0 mm and length at least 263.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 115.3 mm (from Z=0.0 to Z=115.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.0 mm over length 68.8 mm (from Z=0.0 to Z=143.3).\n10. Finish turn diameter Ø30.8 mm over length 74.5 mm (from Z=0.0 to Z=74.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00121", "images": ["images/Shaft_00121.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.8 mm and length at least 235.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.2 mm over length 49.0 mm (from Z=0.0 to Z=193.6).\n10. Finish turn diameter Ø33.0 mm over length 38.9 mm (from Z=0.0 to Z=144.6).\n11. Finish turn diameter Ø30.0 mm over length 105.7 mm (from Z=0.0 to Z=105.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00551", "images": ["images/Shaft_00551.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 110.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 92.4 mm (from Z=0.0 to Z=92.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02573", "images": ["images/Shaft_02573.png", "detail_png/Shaft_02573_length.png", "detail_png/Shaft_02573_diam.png", "detail_png/Shaft_02573_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.6 mm and length at least 217.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.3 mm over length 80.1 mm (from Z=0.0 to Z=163.3).\n10. Finish turn diameter Ø37.0 mm over length 13.9 mm (from Z=0.0 to Z=83.2).\n11. Finish turn diameter Ø33.2 mm over length 40.0 mm (from Z=0.0 to Z=69.3).\n12. Finish turn diameter Ø30.0 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00945", "images": ["images/Shaft_00945.png", "detail_png/Shaft_00945_length.png", "detail_png/Shaft_00945_diam.png", "detail_png/Shaft_00945_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.9 mm and length at least 320.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.9 mm over length 90.4 mm (from Z=0.0 to Z=90.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 62.4 mm (from Z=0.0 to Z=225.0).\n10. Finish turn diameter Ø37.0 mm over length 92.7 mm (from Z=0.0 to Z=162.6).\n11. Finish turn diameter Ø30.0 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02036", "images": ["images/Shaft_02036.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.5 mm and length at least 96.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 7.0 mm (from Z=0.0 to Z=7.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.5 mm over length 23.7 mm (from Z=0.0 to Z=84.2).\n9. Finish turn diameter Ø30.0 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02004", "images": ["images/Shaft_02004.png", "detail_png/Shaft_02004_length.png", "detail_png/Shaft_02004_diam.png", "detail_png/Shaft_02004_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.3 mm and length at least 82.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.3 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.4 mm over length 24.3 mm (from Z=0.0 to Z=62.6).\n9. Finish turn diameter Ø36.8 mm over length 30.0 mm (from Z=0.0 to Z=38.3).\n10. Finish turn diameter Ø30.0 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01026", "images": ["images/Shaft_01026.png", "detail_png/Shaft_01026_length.png", "detail_png/Shaft_01026_diam.png", "detail_png/Shaft_01026_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 170.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 138.8 mm (from Z=0.0 to Z=138.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.3 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00500", "images": ["images/Shaft_00500.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.2 mm and length at least 178.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.7 mm over length 113.6 mm (from Z=0.0 to Z=142.3).\n9. Finish turn diameter Ø44.7 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04878", "images": ["images/Shaft_04878.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.8 mm and length at least 205.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 153.6 mm (from Z=0.0 to Z=153.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01862", "images": ["images/Shaft_01862.png", "detail_png/Shaft_01862_length.png", "detail_png/Shaft_01862_diam.png", "detail_png/Shaft_01862_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 324.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 272.8 mm (from Z=0.0 to Z=272.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.5 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03145", "images": ["images/Shaft_03145.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.5 mm and length at least 263.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 36.8 mm (from Z=0.0 to Z=36.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 221.7 mm (from Z=0.0 to Z=221.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00603", "images": ["images/Shaft_00603.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.6 mm and length at least 153.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 57.3 mm (from Z=0.0 to Z=57.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 45.1 mm (from Z=0.0 to Z=91.4).\n9. Finish turn diameter Ø54.2 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01142", "images": ["images/Shaft_01142.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 126.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.7 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02094", "images": ["images/Shaft_02094.png", "detail_png/Shaft_02094_length.png", "detail_png/Shaft_02094_diam.png", "detail_png/Shaft_02094_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.8 mm and length at least 231.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.3 mm over length 85.8 mm (from Z=0.0 to Z=165.2).\n10. Finish turn diameter Ø56.2 mm over length 79.4 mm (from Z=0.0 to Z=79.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01984", "images": ["images/Shaft_01984.png", "detail_png/Shaft_01984_length.png", "detail_png/Shaft_01984_diam.png", "detail_png/Shaft_01984_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.5 mm and length at least 179.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.5 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 24.5 mm (from Z=0.0 to Z=156.5).\n10. Finish turn diameter Ø30.0 mm over length 132.0 mm (from Z=0.0 to Z=132.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04229", "images": ["images/Shaft_04229.png", "detail_png/Shaft_04229_length.png", "detail_png/Shaft_04229_diam.png", "detail_png/Shaft_04229_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.3 mm and length at least 187.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 165.8 mm (from Z=0.0 to Z=165.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03903", "images": ["images/Shaft_03903.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.0 mm and length at least 223.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.0 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.4 mm over length 51.8 mm (from Z=0.0 to Z=159.7).\n10. Finish turn diameter Ø30.0 mm over length 107.9 mm (from Z=0.0 to Z=107.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04871", "images": ["images/Shaft_04871.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.3 mm and length at least 180.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 54.0 mm (from Z=0.0 to Z=54.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.4 mm over length 73.1 mm (from Z=0.0 to Z=121.4).\n9. Finish turn diameter Ø50.3 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03501", "images": ["images/Shaft_03501.png", "detail_png/Shaft_03501_length.png", "detail_png/Shaft_03501_diam.png", "detail_png/Shaft_03501_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø34.9 mm and length at least 257.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 214.0 mm (from Z=0.0 to Z=214.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03743", "images": ["images/Shaft_03743.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.6 mm and length at least 294.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.6 mm over length 91.7 mm (from Z=0.0 to Z=91.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.1 mm over length 65.3 mm (from Z=0.0 to Z=197.8).\n10. Finish turn diameter Ø50.4 mm over length 132.5 mm (from Z=0.0 to Z=132.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01639", "images": ["images/Shaft_01639.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.3 mm and length at least 243.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.3 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.2 mm over length 66.8 mm (from Z=0.0 to Z=196.9).\n10. Finish turn diameter Ø30.0 mm over length 130.1 mm (from Z=0.0 to Z=130.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02637", "images": ["images/Shaft_02637.png", "detail_png/Shaft_02637_length.png", "detail_png/Shaft_02637_diam.png", "detail_png/Shaft_02637_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 194.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 162.3 mm (from Z=0.0 to Z=162.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.6 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03280", "images": ["images/Shaft_03280.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 117.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04044", "images": ["images/Shaft_04044.png", "detail_png/Shaft_04044_length.png", "detail_png/Shaft_04044_diam.png", "detail_png/Shaft_04044_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 169.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 119.2 mm (from Z=0.0 to Z=119.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04890", "images": ["images/Shaft_04890.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.0 mm and length at least 270.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.9 mm over length 85.9 mm (from Z=0.0 to Z=206.7).\n10. Finish turn diameter Ø41.1 mm over length 76.2 mm (from Z=0.0 to Z=120.8).\n11. Finish turn diameter Ø33.4 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04223", "images": ["images/Shaft_04223.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.9 mm and length at least 247.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.8 mm over length 40.8 mm (from Z=0.0 to Z=208.2).\n10. Finish turn diameter Ø46.0 mm over length 16.3 mm (from Z=0.0 to Z=167.4).\n11. Finish turn diameter Ø36.1 mm over length 43.1 mm (from Z=0.0 to Z=151.1).\n12. Finish turn diameter Ø32.9 mm over length 51.3 mm (from Z=0.0 to Z=108.0).\n13. Finish turn diameter Ø30.0 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02431", "images": ["images/Shaft_02431.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.8 mm and length at least 187.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.8 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.0 mm over length 29.8 mm (from Z=0.0 to Z=135.5).\n9. Finish turn diameter Ø37.3 mm over length 17.6 mm (from Z=0.0 to Z=105.7).\n10. Finish turn diameter Ø30.0 mm over length 88.1 mm (from Z=0.0 to Z=88.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02383", "images": ["images/Shaft_02383.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.3 mm and length at least 267.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 130.4 mm (from Z=0.0 to Z=213.4).\n10. Finish turn diameter Ø50.3 mm over length 36.5 mm (from Z=0.0 to Z=83.0).\n11. Finish turn diameter Ø35.8 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04897", "images": ["images/Shaft_04897.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.6 mm and length at least 189.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 61.4 mm (from Z=0.0 to Z=61.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.9 mm over length 63.1 mm (from Z=0.0 to Z=122.9).\n9. Finish turn diameter Ø30.0 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02922", "images": ["images/Shaft_02922.png", "detail_png/Shaft_02922_length.png", "detail_png/Shaft_02922_diam.png", "detail_png/Shaft_02922_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.1 mm and length at least 189.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 138.8 mm (from Z=0.0 to Z=138.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03731", "images": ["images/Shaft_03731.png", "detail_png/Shaft_03731_length.png", "detail_png/Shaft_03731_diam.png", "detail_png/Shaft_03731_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.7 mm and length at least 144.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.0 mm over length 25.0 mm (from Z=0.0 to Z=124.8).\n9. Finish turn diameter Ø46.8 mm over length 15.1 mm (from Z=0.0 to Z=99.8).\n10. Finish turn diameter Ø42.2 mm over length 42.8 mm (from Z=0.0 to Z=84.7).\n11. Finish turn diameter Ø30.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01140", "images": ["images/Shaft_01140.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.5 mm and length at least 255.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.7 mm over length 103.3 mm (from Z=0.0 to Z=177.0).\n10. Finish turn diameter Ø56.9 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02044", "images": ["images/Shaft_02044.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.8 mm and length at least 296.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 242.6 mm (from Z=0.0 to Z=242.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02970", "images": ["images/Shaft_02970.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.9 mm and length at least 233.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 183.9 mm (from Z=0.0 to Z=183.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04976", "images": ["images/Shaft_04976.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.1 mm and length at least 261.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 184.8 mm (from Z=0.0 to Z=184.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04258", "images": ["images/Shaft_04258.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.5 mm and length at least 154.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.1 mm over length 65.7 mm (from Z=0.0 to Z=97.9).\n9. Finish turn diameter Ø55.2 mm over length 20.1 mm (from Z=0.0 to Z=32.2).\n10. Finish turn diameter Ø50.9 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00953", "images": ["images/Shaft_00953.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.6 mm and length at least 163.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.9 mm over length 70.2 mm (from Z=0.0 to Z=114.0).\n9. Finish turn diameter Ø31.5 mm over length 43.8 mm (from Z=0.0 to Z=43.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00502", "images": ["images/Shaft_00502.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.6 mm and length at least 67.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 12.6 mm (from Z=0.0 to Z=50.4).\n9. Finish turn diameter Ø41.6 mm over length 7.6 mm (from Z=0.0 to Z=37.8).\n10. Finish turn diameter Ø38.6 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04900", "images": ["images/Shaft_04900.png", "detail_png/Shaft_04900_length.png", "detail_png/Shaft_04900_diam.png", "detail_png/Shaft_04900_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.3 mm and length at least 166.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.9 mm over length 28.9 mm (from Z=0.0 to Z=129.4).\n9. Finish turn diameter Ø43.0 mm over length 19.7 mm (from Z=0.0 to Z=100.5).\n10. Finish turn diameter Ø36.8 mm over length 17.9 mm (from Z=0.0 to Z=80.8).\n11. Finish turn diameter Ø31.3 mm over length 31.8 mm (from Z=0.0 to Z=62.9).\n12. Finish turn diameter Ø30.0 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03457", "images": ["images/Shaft_03457.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.2 mm and length at least 257.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.7 mm (from Z=0.0 to Z=229.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02436", "images": ["images/Shaft_02436.png", "detail_png/Shaft_02436_length.png", "detail_png/Shaft_02436_diam.png", "detail_png/Shaft_02436_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 184.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 145.3 mm (from Z=0.0 to Z=145.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.2 mm over length 34.1 mm (from Z=0.0 to Z=34.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00820", "images": ["images/Shaft_00820.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.7 mm and length at least 170.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.7 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.7 mm over length 15.0 mm (from Z=0.0 to Z=140.0).\n9. Finish turn diameter Ø70.5 mm over length 47.1 mm (from Z=0.0 to Z=125.0).\n10. Finish turn diameter Ø55.5 mm over length 33.8 mm (from Z=0.0 to Z=77.9).\n11. Finish turn diameter Ø50.1 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04427", "images": ["images/Shaft_04427.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.7 mm and length at least 293.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.7 mm over length 175.4 mm (from Z=0.0 to Z=175.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.3 mm over length 67.3 mm (from Z=0.0 to Z=113.2).\n10. Finish turn diameter Ø60.1 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00815", "images": ["images/Shaft_00815.png", "detail_png/Shaft_00815_length.png", "detail_png/Shaft_00815_diam.png", "detail_png/Shaft_00815_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.6 mm and length at least 160.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.6 mm over length 20.4 mm (from Z=0.0 to Z=126.6).\n9. Finish turn diameter Ø33.7 mm over length 79.4 mm (from Z=0.0 to Z=106.2).\n10. Finish turn diameter Ø30.0 mm over length 26.8 mm (from Z=0.0 to Z=26.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01489", "images": ["images/Shaft_01489.png", "detail_png/Shaft_01489_length.png", "detail_png/Shaft_01489_diam.png", "detail_png/Shaft_01489_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 156.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 118.2 mm (from Z=0.0 to Z=118.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.4 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00265", "images": ["images/Shaft_00265.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.7 mm and length at least 184.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.7 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 139.6 mm (from Z=0.0 to Z=139.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04572", "images": ["images/Shaft_04572.png", "detail_png/Shaft_04572_length.png", "detail_png/Shaft_04572_diam.png", "detail_png/Shaft_04572_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.4 mm and length at least 132.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 104.1 mm (from Z=0.0 to Z=104.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03036", "images": ["images/Shaft_03036.png", "detail_png/Shaft_03036_length.png", "detail_png/Shaft_03036_diam.png", "detail_png/Shaft_03036_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.0 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 95.2 mm (from Z=0.0 to Z=95.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00416", "images": ["images/Shaft_00416.png", "detail_png/Shaft_00416_length.png", "detail_png/Shaft_00416_diam.png", "detail_png/Shaft_00416_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 166.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.4 mm over length 94.4 mm (from Z=0.0 to Z=94.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02418", "images": ["images/Shaft_02418.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.9 mm and length at least 110.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 11.2 mm (from Z=0.0 to Z=94.7).\n9. Finish turn diameter Ø37.2 mm over length 18.8 mm (from Z=0.0 to Z=83.5).\n10. Finish turn diameter Ø30.0 mm over length 64.7 mm (from Z=0.0 to Z=64.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02846", "images": ["images/Shaft_02846.png", "detail_png/Shaft_02846_length.png", "detail_png/Shaft_02846_diam.png", "detail_png/Shaft_02846_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.9 mm and length at least 95.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.9 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.3 mm over length 5.0 mm (from Z=0.0 to Z=68.6).\n9. Finish turn diameter Ø37.1 mm over length 23.7 mm (from Z=0.0 to Z=63.6).\n10. Finish turn diameter Ø30.0 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01640", "images": ["images/Shaft_01640.png", "detail_png/Shaft_01640_length.png", "detail_png/Shaft_01640_diam.png", "detail_png/Shaft_01640_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.5 mm and length at least 318.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 161.9 mm (from Z=0.0 to Z=161.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 104.2 mm (from Z=0.0 to Z=151.3).\n10. Finish turn diameter Ø30.0 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01617", "images": ["images/Shaft_01617.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 151.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 90.0 mm (from Z=0.0 to Z=90.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.4 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04714", "images": ["images/Shaft_04714.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.0 mm and length at least 324.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.2 mm over length 80.7 mm (from Z=0.0 to Z=248.0).\n10. Finish turn diameter Ø48.1 mm over length 40.9 mm (from Z=0.0 to Z=167.3).\n11. Finish turn diameter Ø30.3 mm over length 61.6 mm (from Z=0.0 to Z=126.4).\n12. Finish turn diameter Ø30.0 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03787", "images": ["images/Shaft_03787.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.6 mm and length at least 299.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 48.9 mm (from Z=0.0 to Z=222.2).\n10. Finish turn diameter Ø30.0 mm over length 173.3 mm (from Z=0.0 to Z=173.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00348", "images": ["images/Shaft_00348.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.4 mm and length at least 174.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.9 mm over length 42.3 mm (from Z=0.0 to Z=97.4).\n9. Finish turn diameter Ø57.4 mm over length 45.6 mm (from Z=0.0 to Z=55.1).\n10. Finish turn diameter Ø53.5 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02771", "images": ["images/Shaft_02771.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.8 mm and length at least 97.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.8 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.7 mm over length 48.5 mm (from Z=0.0 to Z=69.8).\n9. Finish turn diameter Ø50.9 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02697", "images": ["images/Shaft_02697.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.2 mm and length at least 258.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 108.9 mm (from Z=0.0 to Z=108.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.8 mm over length 63.6 mm (from Z=0.0 to Z=144.6).\n10. Finish turn diameter Ø38.5 mm over length 42.4 mm (from Z=0.0 to Z=81.0).\n11. Finish turn diameter Ø30.0 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04579", "images": ["images/Shaft_04579.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.6 mm and length at least 281.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.3 mm over length 18.5 mm (from Z=0.0 to Z=226.9).\n10. Finish turn diameter Ø53.9 mm over length 78.1 mm (from Z=0.0 to Z=208.4).\n11. Finish turn diameter Ø37.8 mm over length 45.8 mm (from Z=0.0 to Z=130.3).\n12. Finish turn diameter Ø30.0 mm over length 84.5 mm (from Z=0.0 to Z=84.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01794", "images": ["images/Shaft_01794.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 262.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.3 mm (from Z=0.0 to Z=146.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.8 mm over length 110.8 mm (from Z=0.0 to Z=110.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04811", "images": ["images/Shaft_04811.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.1 mm and length at least 297.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.1 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 29.2 mm (from Z=0.0 to Z=242.1).\n10. Finish turn diameter Ø31.5 mm over length 70.3 mm (from Z=0.0 to Z=212.9).\n11. Finish turn diameter Ø30.0 mm over length 142.6 mm (from Z=0.0 to Z=142.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04558", "images": ["images/Shaft_04558.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.0 mm and length at least 116.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.1 mm over length 28.4 mm (from Z=0.0 to Z=86.7).\n9. Finish turn diameter Ø49.1 mm over length 28.5 mm (from Z=0.0 to Z=58.3).\n10. Finish turn diameter Ø31.3 mm over length 8.4 mm (from Z=0.0 to Z=29.8).\n11. Finish turn diameter Ø30.0 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02752", "images": ["images/Shaft_02752.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 96.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø19.0 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02013", "images": ["images/Shaft_02013.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.8 mm and length at least 312.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.0 mm over length 146.4 mm (from Z=0.0 to Z=250.1).\n10. Finish turn diameter Ø58.6 mm over length 103.7 mm (from Z=0.0 to Z=103.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02761", "images": ["images/Shaft_02761.png", "detail_png/Shaft_02761_length.png", "detail_png/Shaft_02761_diam.png", "detail_png/Shaft_02761_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.4 mm and length at least 264.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 206.1 mm (from Z=0.0 to Z=206.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04119", "images": ["images/Shaft_04119.png", "detail_png/Shaft_04119_length.png", "detail_png/Shaft_04119_diam.png", "detail_png/Shaft_04119_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.9 mm and length at least 101.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.4 mm (from Z=0.0 to Z=81.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03794", "images": ["images/Shaft_03794.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.2 mm and length at least 319.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 100.5 mm (from Z=0.0 to Z=100.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.1 mm over length 31.3 mm (from Z=0.0 to Z=213.7).\n10. Finish turn diameter Ø40.2 mm over length 21.7 mm (from Z=0.0 to Z=182.4).\n11. Finish turn diameter Ø30.0 mm over length 160.7 mm (from Z=0.0 to Z=160.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01505", "images": ["images/Shaft_01505.png", "detail_png/Shaft_01505_length.png", "detail_png/Shaft_01505_diam.png", "detail_png/Shaft_01505_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.5 mm and length at least 212.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 96.3 mm (from Z=0.0 to Z=96.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.7 mm over length 55.8 mm (from Z=0.0 to Z=110.7).\n10. Finish turn diameter Ø30.0 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02781", "images": ["images/Shaft_02781.png", "detail_png/Shaft_02781_length.png", "detail_png/Shaft_02781_diam.png", "detail_png/Shaft_02781_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.4 mm and length at least 298.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.4 mm over length 82.0 mm (from Z=0.0 to Z=82.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 114.2 mm (from Z=0.0 to Z=211.1).\n10. Finish turn diameter Ø33.4 mm over length 96.9 mm (from Z=0.0 to Z=96.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01948", "images": ["images/Shaft_01948.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.4 mm and length at least 69.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 34.0 mm (from Z=0.0 to Z=42.9).\n9. Finish turn diameter Ø39.5 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03286", "images": ["images/Shaft_03286.png", "detail_png/Shaft_03286_length.png", "detail_png/Shaft_03286_diam.png", "detail_png/Shaft_03286_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.7 mm and length at least 251.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.7 mm over length 100.7 mm (from Z=0.0 to Z=100.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 146.2 mm (from Z=0.0 to Z=146.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03934", "images": ["images/Shaft_03934.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.5 mm and length at least 176.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.5 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.3 mm (from Z=0.0 to Z=111.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04453", "images": ["images/Shaft_04453.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.5 mm and length at least 299.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.3 mm over length 41.2 mm (from Z=0.0 to Z=253.3).\n10. Finish turn diameter Ø30.2 mm over length 64.2 mm (from Z=0.0 to Z=212.1).\n11. Finish turn diameter Ø30.0 mm over length 147.9 mm (from Z=0.0 to Z=147.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00773", "images": ["images/Shaft_00773.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.0 mm and length at least 311.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.6 mm over length 50.4 mm (from Z=0.0 to Z=287.3).\n10. Finish turn diameter Ø30.0 mm over length 236.9 mm (from Z=0.0 to Z=236.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01752", "images": ["images/Shaft_01752.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.7 mm and length at least 211.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.7 mm over length 82.6 mm (from Z=0.0 to Z=82.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 123.8 mm (from Z=0.0 to Z=123.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03503", "images": ["images/Shaft_03503.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø43.0 mm and length at least 185.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.0 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 140.0 mm (from Z=0.0 to Z=140.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01190", "images": ["images/Shaft_01190.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.6 mm and length at least 210.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.3 mm over length 58.8 mm (from Z=0.0 to Z=171.6).\n10. Finish turn diameter Ø30.0 mm over length 112.8 mm (from Z=0.0 to Z=112.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01668", "images": ["images/Shaft_01668.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.9 mm and length at least 100.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 30.1 mm (from Z=0.0 to Z=30.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.6 mm over length 21.1 mm (from Z=0.0 to Z=65.7).\n9. Finish turn diameter Ø55.9 mm over length 7.1 mm (from Z=0.0 to Z=44.6).\n10. Finish turn diameter Ø42.3 mm over length 31.4 mm (from Z=0.0 to Z=37.5).\n11. Finish turn diameter Ø33.2 mm over length 6.1 mm (from Z=0.0 to Z=6.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04870", "images": ["images/Shaft_04870.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.4 mm and length at least 295.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 241.8 mm (from Z=0.0 to Z=241.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00925", "images": ["images/Shaft_00925.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.0 mm and length at least 150.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.0 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.6 mm over length 34.2 mm (from Z=0.0 to Z=124.9).\n9. Finish turn diameter Ø35.7 mm over length 22.2 mm (from Z=0.0 to Z=90.7).\n10. Finish turn diameter Ø30.0 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04648", "images": ["images/Shaft_04648.png", "detail_png/Shaft_04648_length.png", "detail_png/Shaft_04648_diam.png", "detail_png/Shaft_04648_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 143.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 111.4 mm (from Z=0.0 to Z=111.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.7 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03445", "images": ["images/Shaft_03445.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.8 mm and length at least 97.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.8 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.1 mm (from Z=0.0 to Z=78.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04217", "images": ["images/Shaft_04217.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.5 mm and length at least 156.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.9 mm over length 30.0 mm (from Z=0.0 to Z=122.3).\n10. Finish turn diameter Ø30.0 mm over length 92.3 mm (from Z=0.0 to Z=92.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01277", "images": ["images/Shaft_01277.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.0 mm and length at least 201.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 23.3 mm (from Z=0.0 to Z=121.8).\n10. Finish turn diameter Ø30.0 mm over length 98.5 mm (from Z=0.0 to Z=98.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04112", "images": ["images/Shaft_04112.png", "detail_png/Shaft_04112_length.png", "detail_png/Shaft_04112_diam.png", "detail_png/Shaft_04112_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.2 mm and length at least 231.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 93.9 mm (from Z=0.0 to Z=93.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.6 mm over length 13.6 mm (from Z=0.0 to Z=132.5).\n10. Finish turn diameter Ø47.6 mm over length 96.2 mm (from Z=0.0 to Z=118.9).\n11. Finish turn diameter Ø44.0 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04969", "images": ["images/Shaft_04969.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.3 mm and length at least 227.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.3 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 51.0 mm (from Z=0.0 to Z=166.9).\n10. Finish turn diameter Ø59.1 mm over length 24.3 mm (from Z=0.0 to Z=115.9).\n11. Finish turn diameter Ø49.2 mm over length 45.8 mm (from Z=0.0 to Z=91.6).\n12. Finish turn diameter Ø45.4 mm over length 9.9 mm (from Z=0.0 to Z=45.8).\n13. Finish turn diameter Ø30.0 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01871", "images": ["images/Shaft_01871.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.7 mm and length at least 315.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 79.3 mm (from Z=0.0 to Z=79.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.4 mm over length 170.1 mm (from Z=0.0 to Z=231.4).\n10. Finish turn diameter Ø39.8 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01161", "images": ["images/Shaft_01161.png", "detail_png/Shaft_01161_length.png", "detail_png/Shaft_01161_diam.png", "detail_png/Shaft_01161_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.6 mm and length at least 118.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.6 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.5 mm (from Z=0.0 to Z=88.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01576", "images": ["images/Shaft_01576.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.0 mm and length at least 255.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.0 mm over length 85.1 mm (from Z=0.0 to Z=85.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.8 mm over length 132.0 mm (from Z=0.0 to Z=165.2).\n10. Finish turn diameter Ø43.4 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00473", "images": ["images/Shaft_00473.png", "detail_png/Shaft_00473_length.png", "detail_png/Shaft_00473_diam.png", "detail_png/Shaft_00473_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.2 mm and length at least 195.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 43.1 mm (from Z=0.0 to Z=156.6).\n10. Finish turn diameter Ø30.0 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02022", "images": ["images/Shaft_02022.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.8 mm and length at least 225.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.9 mm over length 62.5 mm (from Z=0.0 to Z=167.3).\n10. Finish turn diameter Ø32.3 mm over length 7.5 mm (from Z=0.0 to Z=104.8).\n11. Finish turn diameter Ø30.0 mm over length 97.3 mm (from Z=0.0 to Z=97.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01343", "images": ["images/Shaft_01343.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.1 mm and length at least 286.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 122.1 mm (from Z=0.0 to Z=122.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 13.2 mm (from Z=0.0 to Z=159.5).\n10. Finish turn diameter Ø39.9 mm over length 88.4 mm (from Z=0.0 to Z=146.3).\n11. Finish turn diameter Ø33.8 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04536", "images": ["images/Shaft_04536.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.8 mm and length at least 78.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.8 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00166", "images": ["images/Shaft_00166.png", "detail_png/Shaft_00166_length.png", "detail_png/Shaft_00166_diam.png", "detail_png/Shaft_00166_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.5 mm and length at least 293.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.2 mm over length 25.2 mm (from Z=0.0 to Z=253.1).\n10. Finish turn diameter Ø33.5 mm over length 163.8 mm (from Z=0.0 to Z=227.9).\n11. Finish turn diameter Ø30.0 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02957", "images": ["images/Shaft_02957.png", "detail_png/Shaft_02957_length.png", "detail_png/Shaft_02957_diam.png", "detail_png/Shaft_02957_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.4 mm and length at least 293.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 263.5 mm (from Z=0.0 to Z=263.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02282", "images": ["images/Shaft_02282.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.3 mm and length at least 302.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.9 mm over length 33.1 mm (from Z=0.0 to Z=228.3).\n10. Finish turn diameter Ø38.2 mm over length 69.7 mm (from Z=0.0 to Z=195.2).\n11. Finish turn diameter Ø30.0 mm over length 125.5 mm (from Z=0.0 to Z=125.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04035", "images": ["images/Shaft_04035.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.7 mm and length at least 319.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 102.2 mm (from Z=0.0 to Z=244.5).\n10. Finish turn diameter Ø30.0 mm over length 142.3 mm (from Z=0.0 to Z=142.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02886", "images": ["images/Shaft_02886.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.3 mm and length at least 293.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.3 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.1 mm over length 51.9 mm (from Z=0.0 to Z=208.8).\n10. Finish turn diameter Ø39.4 mm over length 81.3 mm (from Z=0.0 to Z=156.9).\n11. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03831", "images": ["images/Shaft_03831.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.9 mm and length at least 177.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 20.2 mm (from Z=0.0 to Z=150.3).\n10. Finish turn diameter Ø30.0 mm over length 130.1 mm (from Z=0.0 to Z=130.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03122", "images": ["images/Shaft_03122.png", "detail_png/Shaft_03122_length.png", "detail_png/Shaft_03122_diam.png", "detail_png/Shaft_03122_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 218.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.1 mm (from Z=0.0 to Z=178.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.2 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04201", "images": ["images/Shaft_04201.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 206.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 179.8 mm (from Z=0.0 to Z=179.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.3 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04514", "images": ["images/Shaft_04514.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 282.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 248.6 mm (from Z=0.0 to Z=248.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04067", "images": ["images/Shaft_04067.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.5 mm and length at least 316.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.9 mm over length 40.9 mm (from Z=0.0 to Z=280.8).\n10. Finish turn diameter Ø30.0 mm over length 239.9 mm (from Z=0.0 to Z=239.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00451", "images": ["images/Shaft_00451.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.7 mm and length at least 300.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.5 mm over length 91.9 mm (from Z=0.0 to Z=270.9).\n10. Finish turn diameter Ø43.4 mm over length 31.9 mm (from Z=0.0 to Z=179.0).\n11. Finish turn diameter Ø30.0 mm over length 147.1 mm (from Z=0.0 to Z=147.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04375", "images": ["images/Shaft_04375.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.4 mm and length at least 86.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.3 mm over length 35.2 mm (from Z=0.0 to Z=50.3).\n9. Finish turn diameter Ø44.9 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00506", "images": ["images/Shaft_00506.png", "detail_png/Shaft_00506_length.png", "detail_png/Shaft_00506_diam.png", "detail_png/Shaft_00506_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.5 mm and length at least 223.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.5 mm over length 8.2 mm (from Z=0.0 to Z=8.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.9 mm over length 29.1 mm (from Z=0.0 to Z=210.6).\n10. Finish turn diameter Ø36.6 mm over length 15.2 mm (from Z=0.0 to Z=181.5).\n11. Finish turn diameter Ø30.9 mm over length 73.2 mm (from Z=0.0 to Z=166.3).\n12. Finish turn diameter Ø30.0 mm over length 93.1 mm (from Z=0.0 to Z=93.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01287", "images": ["images/Shaft_01287.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.5 mm and length at least 205.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.5 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.2 mm over length 8.4 mm (from Z=0.0 to Z=169.9).\n10. Finish turn diameter Ø30.8 mm over length 53.2 mm (from Z=0.0 to Z=161.5).\n11. Finish turn diameter Ø30.0 mm over length 108.3 mm (from Z=0.0 to Z=108.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03118", "images": ["images/Shaft_03118.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.3 mm and length at least 211.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 127.7 mm (from Z=0.0 to Z=127.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.2 mm over length 64.4 mm (from Z=0.0 to Z=79.1).\n10. Finish turn diameter Ø30.0 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00462", "images": ["images/Shaft_00462.png", "detail_png/Shaft_00462_length.png", "detail_png/Shaft_00462_diam.png", "detail_png/Shaft_00462_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.2 mm and length at least 266.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.5 mm over length 120.5 mm (from Z=0.0 to Z=246.1).\n10. Finish turn diameter Ø47.9 mm over length 125.6 mm (from Z=0.0 to Z=125.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01669", "images": ["images/Shaft_01669.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.3 mm and length at least 275.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.9 mm over length 63.0 mm (from Z=0.0 to Z=208.4).\n10. Finish turn diameter Ø63.1 mm over length 22.2 mm (from Z=0.0 to Z=145.4).\n11. Finish turn diameter Ø47.5 mm over length 66.7 mm (from Z=0.0 to Z=123.2).\n12. Finish turn diameter Ø37.4 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04964", "images": ["images/Shaft_04964.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.2 mm and length at least 298.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.8 mm over length 24.5 mm (from Z=0.0 to Z=235.5).\n10. Finish turn diameter Ø38.9 mm over length 75.8 mm (from Z=0.0 to Z=211.0).\n11. Finish turn diameter Ø30.0 mm over length 135.2 mm (from Z=0.0 to Z=135.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02106", "images": ["images/Shaft_02106.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.2 mm and length at least 233.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.9 mm over length 58.7 mm (from Z=0.0 to Z=146.7).\n10. Finish turn diameter Ø30.0 mm over length 88.0 mm (from Z=0.0 to Z=88.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00877", "images": ["images/Shaft_00877.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.7 mm and length at least 257.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 142.1 mm (from Z=0.0 to Z=142.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 56.3 mm (from Z=0.0 to Z=110.1).\n10. Finish turn diameter Ø38.4 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01737", "images": ["images/Shaft_01737.png", "detail_png/Shaft_01737_length.png", "detail_png/Shaft_01737_diam.png", "detail_png/Shaft_01737_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.2 mm and length at least 282.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 203.5 mm (from Z=0.0 to Z=203.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01554", "images": ["images/Shaft_01554.png", "detail_png/Shaft_01554_length.png", "detail_png/Shaft_01554_diam.png", "detail_png/Shaft_01554_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 65.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.1 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01453", "images": ["images/Shaft_01453.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.5 mm and length at least 173.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 31.4 mm (from Z=0.0 to Z=31.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.6 mm (from Z=0.0 to Z=136.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04069", "images": ["images/Shaft_04069.png", "detail_png/Shaft_04069_length.png", "detail_png/Shaft_04069_diam.png", "detail_png/Shaft_04069_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.5 mm and length at least 197.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 108.5 mm (from Z=0.0 to Z=108.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 83.7 mm (from Z=0.0 to Z=83.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00740", "images": ["images/Shaft_00740.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 239.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 220.6 mm (from Z=0.0 to Z=220.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.9 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00439", "images": ["images/Shaft_00439.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.9 mm and length at least 319.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.7 mm over length 121.1 mm (from Z=0.0 to Z=241.2).\n10. Finish turn diameter Ø63.1 mm over length 63.0 mm (from Z=0.0 to Z=120.1).\n11. Finish turn diameter Ø51.9 mm over length 28.7 mm (from Z=0.0 to Z=57.1).\n12. Finish turn diameter Ø46.7 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02758", "images": ["images/Shaft_02758.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 290.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 237.3 mm (from Z=0.0 to Z=237.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.3 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01800", "images": ["images/Shaft_01800.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.1 mm and length at least 296.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.7 mm over length 21.2 mm (from Z=0.0 to Z=219.4).\n10. Finish turn diameter Ø30.0 mm over length 198.2 mm (from Z=0.0 to Z=198.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04899", "images": ["images/Shaft_04899.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.5 mm and length at least 93.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.0 mm over length 45.7 mm (from Z=0.0 to Z=58.7).\n9. Finish turn diameter Ø55.5 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02414", "images": ["images/Shaft_02414.png", "detail_png/Shaft_02414_length.png", "detail_png/Shaft_02414_diam.png", "detail_png/Shaft_02414_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.3 mm and length at least 252.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.7 mm over length 85.7 mm (from Z=0.0 to Z=222.7).\n10. Finish turn diameter Ø36.9 mm over length 25.2 mm (from Z=0.0 to Z=137.0).\n11. Finish turn diameter Ø33.2 mm over length 40.0 mm (from Z=0.0 to Z=111.8).\n12. Finish turn diameter Ø30.0 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02859", "images": ["images/Shaft_02859.png", "detail_png/Shaft_02859_length.png", "detail_png/Shaft_02859_diam.png", "detail_png/Shaft_02859_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.0 mm and length at least 174.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.0 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.5 mm over length 25.2 mm (from Z=0.0 to Z=83.4).\n9. Finish turn diameter Ø55.7 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01501", "images": ["images/Shaft_01501.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.6 mm and length at least 261.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.8 mm over length 99.0 mm (from Z=0.0 to Z=210.6).\n10. Finish turn diameter Ø61.1 mm over length 111.6 mm (from Z=0.0 to Z=111.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03853", "images": ["images/Shaft_03853.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.5 mm and length at least 251.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 71.7 mm (from Z=0.0 to Z=71.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 80.8 mm (from Z=0.0 to Z=175.2).\n10. Finish turn diameter Ø34.5 mm over length 84.6 mm (from Z=0.0 to Z=94.4).\n11. Finish turn diameter Ø30.0 mm over length 9.8 mm (from Z=0.0 to Z=9.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04533", "images": ["images/Shaft_04533.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.1 mm and length at least 300.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.1 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.1 mm over length 75.5 mm (from Z=0.0 to Z=272.0).\n10. Finish turn diameter Ø45.1 mm over length 74.5 mm (from Z=0.0 to Z=196.5).\n11. Finish turn diameter Ø41.8 mm over length 110.4 mm (from Z=0.0 to Z=122.0).\n12. Finish turn diameter Ø30.0 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03486", "images": ["images/Shaft_03486.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.2 mm and length at least 324.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 78.4 mm (from Z=0.0 to Z=78.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 241.4 mm (from Z=0.0 to Z=241.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02065", "images": ["images/Shaft_02065.png", "detail_png/Shaft_02065_length.png", "detail_png/Shaft_02065_diam.png", "detail_png/Shaft_02065_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.7 mm and length at least 288.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.5 mm over length 100.2 mm (from Z=0.0 to Z=234.3).\n10. Finish turn diameter Ø52.2 mm over length 134.1 mm (from Z=0.0 to Z=134.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04772", "images": ["images/Shaft_04772.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.5 mm and length at least 136.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.5 mm over length 33.7 mm (from Z=0.0 to Z=111.4).\n9. Finish turn diameter Ø43.6 mm over length 66.2 mm (from Z=0.0 to Z=77.7).\n10. Finish turn diameter Ø30.0 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00404", "images": ["images/Shaft_00404.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 76.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.4 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02971", "images": ["images/Shaft_02971.png", "detail_png/Shaft_02971_length.png", "detail_png/Shaft_02971_diam.png", "detail_png/Shaft_02971_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 155.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 93.8 mm (from Z=0.0 to Z=93.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.5 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04088", "images": ["images/Shaft_04088.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 96.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.4 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02200", "images": ["images/Shaft_02200.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.3 mm and length at least 291.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.3 mm over length 73.0 mm (from Z=0.0 to Z=73.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 39.7 mm (from Z=0.0 to Z=213.4).\n10. Finish turn diameter Ø47.1 mm over length 65.9 mm (from Z=0.0 to Z=173.7).\n11. Finish turn diameter Ø36.4 mm over length 42.5 mm (from Z=0.0 to Z=107.8).\n12. Finish turn diameter Ø30.0 mm over length 65.3 mm (from Z=0.0 to Z=65.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03088", "images": ["images/Shaft_03088.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.1 mm and length at least 255.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 240.3 mm (from Z=0.0 to Z=240.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04042", "images": ["images/Shaft_04042.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 232.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 100.0 mm (from Z=0.0 to Z=100.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 127.4 mm (from Z=0.0 to Z=127.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01154", "images": ["images/Shaft_01154.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 312.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 229.7 mm (from Z=0.0 to Z=229.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.1 mm over length 77.8 mm (from Z=0.0 to Z=77.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00784", "images": ["images/Shaft_00784.png", "detail_png/Shaft_00784_length.png", "detail_png/Shaft_00784_diam.png", "detail_png/Shaft_00784_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.6 mm and length at least 240.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.5 mm over length 39.5 mm (from Z=0.0 to Z=220.9).\n10. Finish turn diameter Ø46.0 mm over length 39.3 mm (from Z=0.0 to Z=181.4).\n11. Finish turn diameter Ø38.8 mm over length 6.9 mm (from Z=0.0 to Z=142.1).\n12. Finish turn diameter Ø32.7 mm over length 60.9 mm (from Z=0.0 to Z=135.2).\n13. Finish turn diameter Ø30.0 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02931", "images": ["images/Shaft_02931.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.2 mm and length at least 90.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04462", "images": ["images/Shaft_04462.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.2 mm and length at least 291.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.9 mm over length 77.1 mm (from Z=0.0 to Z=269.9).\n10. Finish turn diameter Ø41.2 mm over length 84.2 mm (from Z=0.0 to Z=192.8).\n11. Finish turn diameter Ø33.8 mm over length 43.0 mm (from Z=0.0 to Z=108.6).\n12. Finish turn diameter Ø30.0 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02166", "images": ["images/Shaft_02166.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 127.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 94.3 mm (from Z=0.0 to Z=94.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00057", "images": ["images/Shaft_00057.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 323.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 213.2 mm (from Z=0.0 to Z=213.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.6 mm over length 105.5 mm (from Z=0.0 to Z=105.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03126", "images": ["images/Shaft_03126.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.2 mm and length at least 294.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.4 mm over length 8.0 mm (from Z=0.0 to Z=214.8).\n10. Finish turn diameter Ø43.6 mm over length 72.7 mm (from Z=0.0 to Z=206.8).\n11. Finish turn diameter Ø35.3 mm over length 34.8 mm (from Z=0.0 to Z=134.1).\n12. Finish turn diameter Ø30.0 mm over length 99.3 mm (from Z=0.0 to Z=99.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02368", "images": ["images/Shaft_02368.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 148.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 124.7 mm (from Z=0.0 to Z=124.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.3 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03357", "images": ["images/Shaft_03357.png", "detail_png/Shaft_03357_length.png", "detail_png/Shaft_03357_diam.png", "detail_png/Shaft_03357_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.1 mm and length at least 236.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.0 mm over length 13.0 mm (from Z=0.0 to Z=161.9).\n10. Finish turn diameter Ø67.8 mm over length 8.8 mm (from Z=0.0 to Z=148.9).\n11. Finish turn diameter Ø57.2 mm over length 76.1 mm (from Z=0.0 to Z=140.1).\n12. Finish turn diameter Ø42.6 mm over length 64.0 mm (from Z=0.0 to Z=64.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00405", "images": ["images/Shaft_00405.png", "detail_png/Shaft_00405_length.png", "detail_png/Shaft_00405_diam.png", "detail_png/Shaft_00405_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.0 mm and length at least 318.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 64.2 mm (from Z=0.0 to Z=64.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 249.2 mm (from Z=0.0 to Z=249.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00279", "images": ["images/Shaft_00279.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.2 mm and length at least 303.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 110.6 mm (from Z=0.0 to Z=110.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.7 mm over length 31.1 mm (from Z=0.0 to Z=187.5).\n10. Finish turn diameter Ø35.2 mm over length 119.9 mm (from Z=0.0 to Z=156.4).\n11. Finish turn diameter Ø31.0 mm over length 36.5 mm (from Z=0.0 to Z=36.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04277", "images": ["images/Shaft_04277.png", "detail_png/Shaft_04277_length.png", "detail_png/Shaft_04277_diam.png", "detail_png/Shaft_04277_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.8 mm and length at least 272.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.8 mm over length 114.9 mm (from Z=0.0 to Z=114.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.9 mm over length 133.0 mm (from Z=0.0 to Z=152.4).\n10. Finish turn diameter Ø58.5 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02068", "images": ["images/Shaft_02068.png", "detail_png/Shaft_02068_length.png", "detail_png/Shaft_02068_diam.png", "detail_png/Shaft_02068_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.0 mm and length at least 110.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 22.6 mm (from Z=0.0 to Z=97.6).\n9. Finish turn diameter Ø31.3 mm over length 26.0 mm (from Z=0.0 to Z=75.0).\n10. Finish turn diameter Ø30.0 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00990", "images": ["images/Shaft_00990.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.6 mm and length at least 82.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.2 mm over length 7.0 mm (from Z=0.0 to Z=62.5).\n9. Finish turn diameter Ø37.4 mm over length 12.5 mm (from Z=0.0 to Z=55.5).\n10. Finish turn diameter Ø32.2 mm over length 14.2 mm (from Z=0.0 to Z=43.0).\n11. Finish turn diameter Ø30.0 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02510", "images": ["images/Shaft_02510.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 257.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 211.6 mm (from Z=0.0 to Z=211.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.3 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03900", "images": ["images/Shaft_03900.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.7 mm and length at least 259.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.7 mm over length 55.8 mm (from Z=0.0 to Z=237.3).\n10. Finish turn diameter Ø45.3 mm over length 56.3 mm (from Z=0.0 to Z=181.5).\n11. Finish turn diameter Ø36.8 mm over length 29.8 mm (from Z=0.0 to Z=125.2).\n12. Finish turn diameter Ø31.3 mm over length 95.4 mm (from Z=0.0 to Z=95.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04443", "images": ["images/Shaft_04443.png", "detail_png/Shaft_04443_length.png", "detail_png/Shaft_04443_diam.png", "detail_png/Shaft_04443_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.3 mm and length at least 204.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.3 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 55.0 mm (from Z=0.0 to Z=156.4).\n10. Finish turn diameter Ø61.9 mm over length 37.6 mm (from Z=0.0 to Z=101.4).\n11. Finish turn diameter Ø54.8 mm over length 16.9 mm (from Z=0.0 to Z=63.8).\n12. Finish turn diameter Ø35.6 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02050", "images": ["images/Shaft_02050.png", "detail_png/Shaft_02050_length.png", "detail_png/Shaft_02050_diam.png", "detail_png/Shaft_02050_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.6 mm and length at least 124.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.6 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.3 mm (from Z=0.0 to Z=105.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03502", "images": ["images/Shaft_03502.png", "detail_png/Shaft_03502_length.png", "detail_png/Shaft_03502_diam.png", "detail_png/Shaft_03502_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.2 mm and length at least 304.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 85.6 mm (from Z=0.0 to Z=238.6).\n10. Finish turn diameter Ø30.0 mm over length 153.0 mm (from Z=0.0 to Z=153.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00657", "images": ["images/Shaft_00657.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 177.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 127.5 mm (from Z=0.0 to Z=127.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.7 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01442", "images": ["images/Shaft_01442.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.8 mm and length at least 289.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.4 mm over length 144.6 mm (from Z=0.0 to Z=264.9).\n10. Finish turn diameter Ø32.7 mm over length 120.3 mm (from Z=0.0 to Z=120.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01424", "images": ["images/Shaft_01424.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.9 mm and length at least 286.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 106.0 mm (from Z=0.0 to Z=106.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.3 mm over length 85.6 mm (from Z=0.0 to Z=175.5).\n10. Finish turn diameter Ø42.5 mm over length 36.0 mm (from Z=0.0 to Z=89.9).\n11. Finish turn diameter Ø30.0 mm over length 53.9 mm (from Z=0.0 to Z=53.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02374", "images": ["images/Shaft_02374.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 102.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.0 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01136", "images": ["images/Shaft_01136.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 191.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 118.3 mm (from Z=0.0 to Z=118.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.4 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03056", "images": ["images/Shaft_03056.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.9 mm and length at least 281.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 220.4 mm (from Z=0.0 to Z=220.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04126", "images": ["images/Shaft_04126.png", "detail_png/Shaft_04126_length.png", "detail_png/Shaft_04126_diam.png", "detail_png/Shaft_04126_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 276.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.9 mm (from Z=0.0 to Z=168.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00596", "images": ["images/Shaft_00596.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.5 mm and length at least 259.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 10.4 mm (from Z=0.0 to Z=10.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.6 mm over length 57.2 mm (from Z=0.0 to Z=243.7).\n10. Finish turn diameter Ø61.1 mm over length 23.9 mm (from Z=0.0 to Z=186.5).\n11. Finish turn diameter Ø49.3 mm over length 80.7 mm (from Z=0.0 to Z=162.6).\n12. Finish turn diameter Ø37.2 mm over length 81.9 mm (from Z=0.0 to Z=81.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00371", "images": ["images/Shaft_00371.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.0 mm and length at least 129.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 6.2 mm (from Z=0.0 to Z=6.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 27.7 mm (from Z=0.0 to Z=117.9).\n9. Finish turn diameter Ø44.1 mm over length 38.1 mm (from Z=0.0 to Z=90.2).\n10. Finish turn diameter Ø30.0 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00119", "images": ["images/Shaft_00119.png", "detail_png/Shaft_00119_length.png", "detail_png/Shaft_00119_diam.png", "detail_png/Shaft_00119_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.0 mm and length at least 271.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.2 mm over length 21.7 mm (from Z=0.0 to Z=231.1).\n10. Finish turn diameter Ø30.0 mm over length 209.4 mm (from Z=0.0 to Z=209.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03884", "images": ["images/Shaft_03884.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.2 mm and length at least 246.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 41.0 mm (from Z=0.0 to Z=185.7).\n10. Finish turn diameter Ø30.0 mm over length 144.7 mm (from Z=0.0 to Z=144.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02746", "images": ["images/Shaft_02746.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø65.8 mm and length at least 91.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 29.3 mm (from Z=0.0 to Z=75.9).\n9. Finish turn diameter Ø33.3 mm over length 33.7 mm (from Z=0.0 to Z=46.6).\n10. Finish turn diameter Ø30.0 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00756", "images": ["images/Shaft_00756.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.9 mm and length at least 156.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.6 mm over length 56.1 mm (from Z=0.0 to Z=131.4).\n9. Finish turn diameter Ø49.5 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00819", "images": ["images/Shaft_00819.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.3 mm and length at least 96.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.3 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.9 mm over length 26.8 mm (from Z=0.0 to Z=75.7).\n9. Finish turn diameter Ø30.1 mm over length 12.8 mm (from Z=0.0 to Z=48.9).\n10. Finish turn diameter Ø30.0 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02406", "images": ["images/Shaft_02406.png", "detail_png/Shaft_02406_length.png", "detail_png/Shaft_02406_diam.png", "detail_png/Shaft_02406_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.8 mm and length at least 152.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.4 mm over length 63.2 mm (from Z=0.0 to Z=129.0).\n9. Finish turn diameter Ø30.0 mm over length 65.8 mm (from Z=0.0 to Z=65.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00841", "images": ["images/Shaft_00841.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.0 mm and length at least 223.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø74.6 mm over length 61.0 mm (from Z=0.0 to Z=189.4).\n10. Finish turn diameter Ø70.7 mm over length 44.9 mm (from Z=0.0 to Z=128.4).\n11. Finish turn diameter Ø55.3 mm over length 39.4 mm (from Z=0.0 to Z=83.5).\n12. Finish turn diameter Ø51.6 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02464", "images": ["images/Shaft_02464.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.7 mm and length at least 244.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.2 mm over length 56.8 mm (from Z=0.0 to Z=198.2).\n10. Finish turn diameter Ø52.7 mm over length 83.9 mm (from Z=0.0 to Z=141.4).\n11. Finish turn diameter Ø33.6 mm over length 57.5 mm (from Z=0.0 to Z=57.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00507", "images": ["images/Shaft_00507.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.0 mm and length at least 100.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.9 mm over length 57.1 mm (from Z=0.0 to Z=86.6).\n9. Finish turn diameter Ø32.9 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04525", "images": ["images/Shaft_04525.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.6 mm and length at least 86.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.1 mm over length 25.7 mm (from Z=0.0 to Z=46.6).\n9. Finish turn diameter Ø41.9 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00395", "images": ["images/Shaft_00395.png", "detail_png/Shaft_00395_length.png", "detail_png/Shaft_00395_diam.png", "detail_png/Shaft_00395_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.3 mm and length at least 203.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.3 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.6 mm over length 36.7 mm (from Z=0.0 to Z=178.7).\n10. Finish turn diameter Ø31.7 mm over length 38.1 mm (from Z=0.0 to Z=142.0).\n11. Finish turn diameter Ø30.0 mm over length 103.9 mm (from Z=0.0 to Z=103.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03090", "images": ["images/Shaft_03090.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø46.1 mm and length at least 263.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.7 mm over length 10.8 mm (from Z=0.0 to Z=221.9).\n10. Finish turn diameter Ø35.4 mm over length 69.4 mm (from Z=0.0 to Z=211.1).\n11. Finish turn diameter Ø30.0 mm over length 141.7 mm (from Z=0.0 to Z=141.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00042", "images": ["images/Shaft_00042.png", "detail_png/Shaft_00042_length.png", "detail_png/Shaft_00042_diam.png", "detail_png/Shaft_00042_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 143.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 77.8 mm (from Z=0.0 to Z=77.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.9 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04979", "images": ["images/Shaft_04979.png", "detail_png/Shaft_04979_length.png", "detail_png/Shaft_04979_diam.png", "detail_png/Shaft_04979_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.5 mm and length at least 250.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.1 mm over length 32.5 mm (from Z=0.0 to Z=146.3).\n10. Finish turn diameter Ø36.4 mm over length 52.9 mm (from Z=0.0 to Z=113.8).\n11. Finish turn diameter Ø30.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04403", "images": ["images/Shaft_04403.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.6 mm and length at least 97.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 7.1 mm (from Z=0.0 to Z=7.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.7 mm over length 15.1 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø41.2 mm over length 15.9 mm (from Z=0.0 to Z=70.7).\n10. Finish turn diameter Ø30.2 mm over length 5.0 mm (from Z=0.0 to Z=54.8).\n11. Finish turn diameter Ø30.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04574", "images": ["images/Shaft_04574.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.3 mm and length at least 276.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 28.7 mm (from Z=0.0 to Z=200.6).\n10. Finish turn diameter Ø30.0 mm over length 171.9 mm (from Z=0.0 to Z=171.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00177", "images": ["images/Shaft_00177.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.4 mm and length at least 122.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 26.7 mm (from Z=0.0 to Z=26.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 91.1 mm (from Z=0.0 to Z=91.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01036", "images": ["images/Shaft_01036.png", "detail_png/Shaft_01036_length.png", "detail_png/Shaft_01036_diam.png", "detail_png/Shaft_01036_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø35.0 mm and length at least 71.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.0 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00487", "images": ["images/Shaft_00487.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.3 mm and length at least 153.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.7 mm over length 23.3 mm (from Z=0.0 to Z=112.1).\n9. Finish turn diameter Ø31.0 mm over length 12.1 mm (from Z=0.0 to Z=88.8).\n10. Finish turn diameter Ø30.0 mm over length 76.7 mm (from Z=0.0 to Z=76.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01921", "images": ["images/Shaft_01921.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.5 mm and length at least 207.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.8 mm (from Z=0.0 to Z=181.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00242", "images": ["images/Shaft_00242.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.1 mm and length at least 304.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.9 mm over length 119.8 mm (from Z=0.0 to Z=231.2).\n10. Finish turn diameter Ø30.0 mm over length 111.4 mm (from Z=0.0 to Z=111.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04155", "images": ["images/Shaft_04155.png", "detail_png/Shaft_04155_length.png", "detail_png/Shaft_04155_diam.png", "detail_png/Shaft_04155_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 123.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 82.5 mm (from Z=0.0 to Z=82.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.2 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02103", "images": ["images/Shaft_02103.png", "detail_png/Shaft_02103_length.png", "detail_png/Shaft_02103_diam.png", "detail_png/Shaft_02103_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.2 mm and length at least 110.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.6 mm over length 24.7 mm (from Z=0.0 to Z=66.1).\n9. Finish turn diameter Ø43.1 mm over length 26.9 mm (from Z=0.0 to Z=41.4).\n10. Finish turn diameter Ø30.0 mm over length 14.5 mm (from Z=0.0 to Z=14.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02702", "images": ["images/Shaft_02702.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.6 mm and length at least 233.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.9 mm over length 51.5 mm (from Z=0.0 to Z=212.7).\n10. Finish turn diameter Ø46.1 mm over length 46.3 mm (from Z=0.0 to Z=161.2).\n11. Finish turn diameter Ø32.3 mm over length 5.6 mm (from Z=0.0 to Z=114.9).\n12. Finish turn diameter Ø30.0 mm over length 109.3 mm (from Z=0.0 to Z=109.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03248", "images": ["images/Shaft_03248.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.0 mm and length at least 168.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.2 mm over length 23.6 mm (from Z=0.0 to Z=140.2).\n9. Finish turn diameter Ø59.9 mm over length 14.4 mm (from Z=0.0 to Z=116.6).\n10. Finish turn diameter Ø49.7 mm over length 36.1 mm (from Z=0.0 to Z=102.2).\n11. Finish turn diameter Ø40.1 mm over length 33.0 mm (from Z=0.0 to Z=66.1).\n12. Finish turn diameter Ø30.0 mm over length 33.1 mm (from Z=0.0 to Z=33.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04387", "images": ["images/Shaft_04387.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.5 mm and length at least 67.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 27.6 mm (from Z=0.0 to Z=27.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.0 mm over length 28.2 mm (from Z=0.0 to Z=35.3).\n9. Finish turn diameter Ø43.9 mm over length 7.1 mm (from Z=0.0 to Z=7.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00441", "images": ["images/Shaft_00441.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.7 mm and length at least 119.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.5 mm over length 21.9 mm (from Z=0.0 to Z=90.4).\n9. Finish turn diameter Ø30.0 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04885", "images": ["images/Shaft_04885.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.7 mm and length at least 282.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.3 mm over length 62.4 mm (from Z=0.0 to Z=263.1).\n10. Finish turn diameter Ø46.1 mm over length 77.4 mm (from Z=0.0 to Z=200.7).\n11. Finish turn diameter Ø39.3 mm over length 8.5 mm (from Z=0.0 to Z=123.3).\n12. Finish turn diameter Ø30.0 mm over length 114.8 mm (from Z=0.0 to Z=114.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00174", "images": ["images/Shaft_00174.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.7 mm and length at least 207.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.7 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 47.1 mm (from Z=0.0 to Z=154.8).\n10. Finish turn diameter Ø31.5 mm over length 12.9 mm (from Z=0.0 to Z=107.7).\n11. Finish turn diameter Ø30.0 mm over length 94.8 mm (from Z=0.0 to Z=94.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01766", "images": ["images/Shaft_01766.png", "detail_png/Shaft_01766_length.png", "detail_png/Shaft_01766_diam.png", "detail_png/Shaft_01766_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.8 mm and length at least 148.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.8 mm over length 6.9 mm (from Z=0.0 to Z=101.8).\n10. Finish turn diameter Ø30.0 mm over length 94.9 mm (from Z=0.0 to Z=94.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03102", "images": ["images/Shaft_03102.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.5 mm and length at least 118.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.5 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 14.5 mm (from Z=0.0 to Z=85.8).\n9. Finish turn diameter Ø37.6 mm over length 27.3 mm (from Z=0.0 to Z=71.3).\n10. Finish turn diameter Ø30.0 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04038", "images": ["images/Shaft_04038.png", "detail_png/Shaft_04038_length.png", "detail_png/Shaft_04038_diam.png", "detail_png/Shaft_04038_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.7 mm and length at least 198.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 88.6 mm (from Z=0.0 to Z=88.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 31.6 mm (from Z=0.0 to Z=105.2).\n10. Finish turn diameter Ø30.0 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04236", "images": ["images/Shaft_04236.png", "detail_png/Shaft_04236_length.png", "detail_png/Shaft_04236_diam.png", "detail_png/Shaft_04236_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.7 mm and length at least 208.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 138.6 mm (from Z=0.0 to Z=138.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00077", "images": ["images/Shaft_00077.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.5 mm and length at least 295.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 95.7 mm (from Z=0.0 to Z=95.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.3 mm over length 68.0 mm (from Z=0.0 to Z=194.8).\n10. Finish turn diameter Ø54.8 mm over length 79.1 mm (from Z=0.0 to Z=126.8).\n11. Finish turn diameter Ø40.0 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00318", "images": ["images/Shaft_00318.png", "detail_png/Shaft_00318_length.png", "detail_png/Shaft_00318_diam.png", "detail_png/Shaft_00318_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.3 mm and length at least 226.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.1 mm over length 25.1 mm (from Z=0.0 to Z=150.5).\n10. Finish turn diameter Ø54.4 mm over length 69.0 mm (from Z=0.0 to Z=125.4).\n11. Finish turn diameter Ø51.2 mm over length 14.4 mm (from Z=0.0 to Z=56.4).\n12. Finish turn diameter Ø38.3 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00457", "images": ["images/Shaft_00457.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.5 mm and length at least 270.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 127.7 mm (from Z=0.0 to Z=127.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 42.7 mm (from Z=0.0 to Z=137.6).\n10. Finish turn diameter Ø42.5 mm over length 94.9 mm (from Z=0.0 to Z=94.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04793", "images": ["images/Shaft_04793.png", "detail_png/Shaft_04793_length.png", "detail_png/Shaft_04793_diam.png", "detail_png/Shaft_04793_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 125.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 107.5 mm (from Z=0.0 to Z=107.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04688", "images": ["images/Shaft_04688.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.7 mm and length at least 163.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.3 mm over length 19.6 mm (from Z=0.0 to Z=141.7).\n9. Finish turn diameter Ø30.6 mm over length 46.4 mm (from Z=0.0 to Z=122.1).\n10. Finish turn diameter Ø30.0 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02829", "images": ["images/Shaft_02829.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.6 mm and length at least 194.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 35.0 mm (from Z=0.0 to Z=106.4).\n9. Finish turn diameter Ø30.0 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01740", "images": ["images/Shaft_01740.png", "detail_png/Shaft_01740_length.png", "detail_png/Shaft_01740_diam.png", "detail_png/Shaft_01740_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.6 mm and length at least 128.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 52.7 mm (from Z=0.0 to Z=52.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 71.2 mm (from Z=0.0 to Z=71.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00321", "images": ["images/Shaft_00321.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.1 mm and length at least 155.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.7 mm over length 57.2 mm (from Z=0.0 to Z=112.9).\n9. Finish turn diameter Ø44.8 mm over length 29.6 mm (from Z=0.0 to Z=55.7).\n10. Finish turn diameter Ø37.9 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00533", "images": ["images/Shaft_00533.png", "detail_png/Shaft_00533_length.png", "detail_png/Shaft_00533_diam.png", "detail_png/Shaft_00533_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.7 mm and length at least 160.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.2 mm over length 76.5 mm (from Z=0.0 to Z=98.0).\n9. Finish turn diameter Ø32.8 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00859", "images": ["images/Shaft_00859.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.7 mm and length at least 246.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.7 mm over length 16.2 mm (from Z=0.0 to Z=16.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.7 mm over length 37.7 mm (from Z=0.0 to Z=225.7).\n10. Finish turn diameter Ø30.0 mm over length 188.0 mm (from Z=0.0 to Z=188.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00513", "images": ["images/Shaft_00513.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.3 mm and length at least 291.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.4 mm over length 29.7 mm (from Z=0.0 to Z=224.8).\n10. Finish turn diameter Ø50.0 mm over length 96.1 mm (from Z=0.0 to Z=195.1).\n11. Finish turn diameter Ø41.0 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01259", "images": ["images/Shaft_01259.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.0 mm and length at least 177.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 26.9 mm (from Z=0.0 to Z=110.3).\n9. Finish turn diameter Ø33.3 mm over length 50.8 mm (from Z=0.0 to Z=83.4).\n10. Finish turn diameter Ø30.0 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04039", "images": ["images/Shaft_04039.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.4 mm and length at least 176.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.4 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.0 mm over length 41.0 mm (from Z=0.0 to Z=125.2).\n9. Finish turn diameter Ø30.0 mm over length 84.2 mm (from Z=0.0 to Z=84.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02818", "images": ["images/Shaft_02818.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 123.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 38.2 mm (from Z=0.0 to Z=113.5).\n9. Finish turn diameter Ø31.7 mm over length 12.6 mm (from Z=0.0 to Z=75.3).\n10. Finish turn diameter Ø30.0 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04832", "images": ["images/Shaft_04832.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.2 mm and length at least 146.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.2 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.6 mm over length 12.1 mm (from Z=0.0 to Z=102.4).\n10. Finish turn diameter Ø30.0 mm over length 90.3 mm (from Z=0.0 to Z=90.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04118", "images": ["images/Shaft_04118.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.3 mm and length at least 295.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 137.2 mm (from Z=0.0 to Z=137.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 52.1 mm (from Z=0.0 to Z=152.9).\n10. Finish turn diameter Ø49.2 mm over length 100.8 mm (from Z=0.0 to Z=100.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03509", "images": ["images/Shaft_03509.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.8 mm and length at least 294.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.8 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 252.7 mm (from Z=0.0 to Z=252.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00527", "images": ["images/Shaft_00527.png", "detail_png/Shaft_00527_length.png", "detail_png/Shaft_00527_diam.png", "detail_png/Shaft_00527_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 303.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 279.6 mm (from Z=0.0 to Z=279.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.3 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04437", "images": ["images/Shaft_04437.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.5 mm and length at least 70.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.5 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 8.1 mm (from Z=0.0 to Z=51.0).\n9. Finish turn diameter Ø30.2 mm over length 5.0 mm (from Z=0.0 to Z=42.9).\n10. Finish turn diameter Ø30.0 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00485", "images": ["images/Shaft_00485.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.5 mm and length at least 219.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.5 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.1 mm over length 57.4 mm (from Z=0.0 to Z=182.3).\n10. Finish turn diameter Ø59.9 mm over length 21.8 mm (from Z=0.0 to Z=124.9).\n11. Finish turn diameter Ø53.6 mm over length 59.6 mm (from Z=0.0 to Z=103.1).\n12. Finish turn diameter Ø48.9 mm over length 6.8 mm (from Z=0.0 to Z=43.5).\n13. Finish turn diameter Ø36.6 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03336", "images": ["images/Shaft_03336.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.1 mm and length at least 303.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 174.3 mm (from Z=0.0 to Z=174.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 124.0 mm (from Z=0.0 to Z=124.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03049", "images": ["images/Shaft_03049.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.7 mm and length at least 175.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.7 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.7 mm over length 24.4 mm (from Z=0.0 to Z=114.8).\n9. Finish turn diameter Ø36.6 mm over length 7.4 mm (from Z=0.0 to Z=90.4).\n10. Finish turn diameter Ø30.0 mm over length 83.0 mm (from Z=0.0 to Z=83.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04365", "images": ["images/Shaft_04365.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.1 mm and length at least 295.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.9 mm over length 68.4 mm (from Z=0.0 to Z=232.5).\n10. Finish turn diameter Ø47.9 mm over length 81.2 mm (from Z=0.0 to Z=164.1).\n11. Finish turn diameter Ø36.7 mm over length 13.3 mm (from Z=0.0 to Z=82.9).\n12. Finish turn diameter Ø30.0 mm over length 69.6 mm (from Z=0.0 to Z=69.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01247", "images": ["images/Shaft_01247.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 254.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.1 mm (from Z=0.0 to Z=202.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.4 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02907", "images": ["images/Shaft_02907.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.3 mm and length at least 127.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.3 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.6 mm over length 11.7 mm (from Z=0.0 to Z=93.9).\n9. Finish turn diameter Ø53.5 mm over length 14.4 mm (from Z=0.0 to Z=82.2).\n10. Finish turn diameter Ø33.8 mm over length 24.7 mm (from Z=0.0 to Z=67.8).\n11. Finish turn diameter Ø30.0 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04819", "images": ["images/Shaft_04819.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.2 mm and length at least 302.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 149.0 mm (from Z=0.0 to Z=149.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.1 mm (from Z=0.0 to Z=148.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01401", "images": ["images/Shaft_01401.png", "detail_png/Shaft_01401_length.png", "detail_png/Shaft_01401_diam.png", "detail_png/Shaft_01401_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.5 mm and length at least 125.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.8 mm over length 11.4 mm (from Z=0.0 to Z=73.6).\n9. Finish turn diameter Ø46.7 mm over length 10.7 mm (from Z=0.0 to Z=62.2).\n10. Finish turn diameter Ø30.0 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03127", "images": ["images/Shaft_03127.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 323.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 225.6 mm (from Z=0.0 to Z=225.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.1 mm over length 93.0 mm (from Z=0.0 to Z=93.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02142", "images": ["images/Shaft_02142.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 184.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.5 mm (from Z=0.0 to Z=146.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02447", "images": ["images/Shaft_02447.png", "detail_png/Shaft_02447_length.png", "detail_png/Shaft_02447_diam.png", "detail_png/Shaft_02447_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.0 mm and length at least 67.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.5 mm over length 12.4 mm (from Z=0.0 to Z=40.7).\n9. Finish turn diameter Ø43.6 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03644", "images": ["images/Shaft_03644.png", "detail_png/Shaft_03644_length.png", "detail_png/Shaft_03644_diam.png", "detail_png/Shaft_03644_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.0 mm and length at least 105.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.5 mm over length 9.4 mm (from Z=0.0 to Z=75.0).\n9. Finish turn diameter Ø48.8 mm over length 24.1 mm (from Z=0.0 to Z=65.6).\n10. Finish turn diameter Ø39.6 mm over length 10.2 mm (from Z=0.0 to Z=41.5).\n11. Finish turn diameter Ø30.0 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03950", "images": ["images/Shaft_03950.png", "detail_png/Shaft_03950_length.png", "detail_png/Shaft_03950_diam.png", "detail_png/Shaft_03950_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.7 mm and length at least 264.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 44.2 mm (from Z=0.0 to Z=236.3).\n10. Finish turn diameter Ø45.3 mm over length 50.0 mm (from Z=0.0 to Z=192.1).\n11. Finish turn diameter Ø35.3 mm over length 35.4 mm (from Z=0.0 to Z=142.1).\n12. Finish turn diameter Ø30.0 mm over length 106.7 mm (from Z=0.0 to Z=106.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03346", "images": ["images/Shaft_03346.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.9 mm and length at least 155.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 36.4 mm (from Z=0.0 to Z=36.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 31.5 mm (from Z=0.0 to Z=114.4).\n9. Finish turn diameter Ø52.7 mm over length 23.8 mm (from Z=0.0 to Z=82.9).\n10. Finish turn diameter Ø49.2 mm over length 43.6 mm (from Z=0.0 to Z=59.1).\n11. Finish turn diameter Ø31.7 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00569", "images": ["images/Shaft_00569.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.6 mm and length at least 301.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.6 mm over length 127.0 mm (from Z=0.0 to Z=127.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.4 mm over length 32.6 mm (from Z=0.0 to Z=169.1).\n10. Finish turn diameter Ø31.6 mm over length 50.3 mm (from Z=0.0 to Z=136.5).\n11. Finish turn diameter Ø30.0 mm over length 86.2 mm (from Z=0.0 to Z=86.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01485", "images": ["images/Shaft_01485.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.8 mm and length at least 273.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.8 mm over length 90.5 mm (from Z=0.0 to Z=204.3).\n10. Finish turn diameter Ø30.0 mm over length 113.8 mm (from Z=0.0 to Z=113.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02830", "images": ["images/Shaft_02830.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.3 mm and length at least 150.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.2 mm over length 42.9 mm (from Z=0.0 to Z=88.8).\n9. Finish turn diameter Ø52.5 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01276", "images": ["images/Shaft_01276.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.8 mm and length at least 189.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.5 mm over length 31.3 mm (from Z=0.0 to Z=135.8).\n10. Finish turn diameter Ø35.0 mm over length 7.4 mm (from Z=0.0 to Z=104.5).\n11. Finish turn diameter Ø30.0 mm over length 97.1 mm (from Z=0.0 to Z=97.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01426", "images": ["images/Shaft_01426.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.2 mm and length at least 289.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.6 mm over length 67.4 mm (from Z=0.0 to Z=212.2).\n10. Finish turn diameter Ø61.4 mm over length 70.6 mm (from Z=0.0 to Z=144.8).\n11. Finish turn diameter Ø50.4 mm over length 74.2 mm (from Z=0.0 to Z=74.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01964", "images": ["images/Shaft_01964.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.7 mm and length at least 263.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.6 mm over length 39.0 mm (from Z=0.0 to Z=234.4).\n10. Finish turn diameter Ø33.5 mm over length 70.2 mm (from Z=0.0 to Z=195.4).\n11. Finish turn diameter Ø30.0 mm over length 125.2 mm (from Z=0.0 to Z=125.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04880", "images": ["images/Shaft_04880.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.6 mm and length at least 320.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.6 mm over length 121.4 mm (from Z=0.0 to Z=121.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 20.3 mm (from Z=0.0 to Z=194.4).\n10. Finish turn diameter Ø47.3 mm over length 58.5 mm (from Z=0.0 to Z=174.1).\n11. Finish turn diameter Ø30.0 mm over length 115.6 mm (from Z=0.0 to Z=115.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04111", "images": ["images/Shaft_04111.png", "detail_png/Shaft_04111_length.png", "detail_png/Shaft_04111_diam.png", "detail_png/Shaft_04111_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.6 mm and length at least 316.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.6 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 98.5 mm (from Z=0.0 to Z=232.8).\n10. Finish turn diameter Ø30.0 mm over length 134.3 mm (from Z=0.0 to Z=134.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03353", "images": ["images/Shaft_03353.png", "detail_png/Shaft_03353_length.png", "detail_png/Shaft_03353_diam.png", "detail_png/Shaft_03353_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 170.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 112.6 mm (from Z=0.0 to Z=112.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.3 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00477", "images": ["images/Shaft_00477.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.9 mm and length at least 193.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.9 mm over length 49.0 mm (from Z=0.0 to Z=159.1).\n9. Finish turn diameter Ø37.9 mm over length 36.6 mm (from Z=0.0 to Z=110.1).\n10. Finish turn diameter Ø30.0 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00312", "images": ["images/Shaft_00312.png", "detail_png/Shaft_00312_length.png", "detail_png/Shaft_00312_diam.png", "detail_png/Shaft_00312_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.4 mm and length at least 157.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 115.4 mm (from Z=0.0 to Z=115.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01886", "images": ["images/Shaft_01886.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.5 mm and length at least 83.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 6.2 mm (from Z=0.0 to Z=6.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.2 mm over length 17.1 mm (from Z=0.0 to Z=72.0).\n9. Finish turn diameter Ø51.9 mm over length 14.1 mm (from Z=0.0 to Z=54.9).\n10. Finish turn diameter Ø44.0 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01709", "images": ["images/Shaft_01709.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 316.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.5 mm over length 25.2 mm (from Z=0.0 to Z=279.6).\n10. Finish turn diameter Ø30.0 mm over length 254.4 mm (from Z=0.0 to Z=254.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00466", "images": ["images/Shaft_00466.png", "detail_png/Shaft_00466_length.png", "detail_png/Shaft_00466_diam.png", "detail_png/Shaft_00466_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.3 mm and length at least 202.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.3 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.6 mm (from Z=0.0 to Z=168.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03287", "images": ["images/Shaft_03287.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.2 mm and length at least 150.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.7 mm (from Z=0.0 to Z=111.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03846", "images": ["images/Shaft_03846.png", "detail_png/Shaft_03846_length.png", "detail_png/Shaft_03846_diam.png", "detail_png/Shaft_03846_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.7 mm and length at least 283.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.1 mm over length 64.9 mm (from Z=0.0 to Z=258.2).\n10. Finish turn diameter Ø30.0 mm over length 193.3 mm (from Z=0.0 to Z=193.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02876", "images": ["images/Shaft_02876.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.3 mm and length at least 316.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 57.4 mm (from Z=0.0 to Z=57.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 18.0 mm (from Z=0.0 to Z=254.0).\n10. Finish turn diameter Ø39.3 mm over length 80.2 mm (from Z=0.0 to Z=236.0).\n11. Finish turn diameter Ø31.8 mm over length 67.4 mm (from Z=0.0 to Z=155.8).\n12. Finish turn diameter Ø30.0 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02257", "images": ["images/Shaft_02257.png", "detail_png/Shaft_02257_length.png", "detail_png/Shaft_02257_diam.png", "detail_png/Shaft_02257_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.1 mm and length at least 197.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 51.4 mm (from Z=0.0 to Z=51.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 28.8 mm (from Z=0.0 to Z=141.5).\n10. Finish turn diameter Ø56.0 mm over length 17.2 mm (from Z=0.0 to Z=112.7).\n11. Finish turn diameter Ø46.3 mm over length 41.3 mm (from Z=0.0 to Z=95.5).\n12. Finish turn diameter Ø33.6 mm over length 54.2 mm (from Z=0.0 to Z=54.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02918", "images": ["images/Shaft_02918.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 74.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.2 mm over length 7.9 mm (from Z=0.0 to Z=48.9).\n9. Finish turn diameter Ø37.8 mm over length 20.9 mm (from Z=0.0 to Z=41.0).\n10. Finish turn diameter Ø30.0 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02179", "images": ["images/Shaft_02179.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø62.7 mm and length at least 241.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.7 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.4 mm over length 43.7 mm (from Z=0.0 to Z=212.3).\n10. Finish turn diameter Ø40.5 mm over length 66.9 mm (from Z=0.0 to Z=168.6).\n11. Finish turn diameter Ø32.8 mm over length 42.9 mm (from Z=0.0 to Z=101.7).\n12. Finish turn diameter Ø30.0 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03465", "images": ["images/Shaft_03465.png", "detail_png/Shaft_03465_length.png", "detail_png/Shaft_03465_diam.png", "detail_png/Shaft_03465_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 279.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 232.5 mm (from Z=0.0 to Z=232.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.1 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02153", "images": ["images/Shaft_02153.png", "detail_png/Shaft_02153_length.png", "detail_png/Shaft_02153_diam.png", "detail_png/Shaft_02153_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.6 mm and length at least 162.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.8 mm over length 43.1 mm (from Z=0.0 to Z=116.5).\n9. Finish turn diameter Ø53.0 mm over length 16.7 mm (from Z=0.0 to Z=73.4).\n10. Finish turn diameter Ø48.1 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03405", "images": ["images/Shaft_03405.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 322.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 282.1 mm (from Z=0.0 to Z=282.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02824", "images": ["images/Shaft_02824.png", "detail_png/Shaft_02824_length.png", "detail_png/Shaft_02824_diam.png", "detail_png/Shaft_02824_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.5 mm and length at least 98.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 7.8 mm (from Z=0.0 to Z=7.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 85.9 mm (from Z=0.0 to Z=85.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02512", "images": ["images/Shaft_02512.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.0 mm and length at least 207.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 60.2 mm (from Z=0.0 to Z=60.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.9 mm over length 53.6 mm (from Z=0.0 to Z=142.3).\n10. Finish turn diameter Ø30.0 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02288", "images": ["images/Shaft_02288.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.6 mm and length at least 284.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.5 mm over length 34.3 mm (from Z=0.0 to Z=244.0).\n10. Finish turn diameter Ø35.4 mm over length 33.6 mm (from Z=0.0 to Z=209.7).\n11. Finish turn diameter Ø30.0 mm over length 176.1 mm (from Z=0.0 to Z=176.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03674", "images": ["images/Shaft_03674.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.0 mm and length at least 120.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.0 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.3 mm (from Z=0.0 to Z=102.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03256", "images": ["images/Shaft_03256.png", "detail_png/Shaft_03256_length.png", "detail_png/Shaft_03256_diam.png", "detail_png/Shaft_03256_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.9 mm and length at least 307.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.9 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.7 mm over length 96.4 mm (from Z=0.0 to Z=289.9).\n10. Finish turn diameter Ø30.0 mm over length 193.5 mm (from Z=0.0 to Z=193.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00771", "images": ["images/Shaft_00771.png", "detail_png/Shaft_00771_length.png", "detail_png/Shaft_00771_diam.png", "detail_png/Shaft_00771_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.5 mm and length at least 190.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.5 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.1 mm over length 30.1 mm (from Z=0.0 to Z=140.1).\n10. Finish turn diameter Ø30.0 mm over length 110.0 mm (from Z=0.0 to Z=110.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04663", "images": ["images/Shaft_04663.png", "detail_png/Shaft_04663_length.png", "detail_png/Shaft_04663_diam.png", "detail_png/Shaft_04663_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 268.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 247.8 mm (from Z=0.0 to Z=247.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00905", "images": ["images/Shaft_00905.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.8 mm and length at least 174.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 11.8 mm (from Z=0.0 to Z=128.8).\n10. Finish turn diameter Ø30.0 mm over length 117.0 mm (from Z=0.0 to Z=117.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02061", "images": ["images/Shaft_02061.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 155.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 133.7 mm (from Z=0.0 to Z=133.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.3 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00633", "images": ["images/Shaft_00633.png", "detail_png/Shaft_00633_length.png", "detail_png/Shaft_00633_diam.png", "detail_png/Shaft_00633_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.8 mm and length at least 249.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.3 mm (from Z=0.0 to Z=190.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00892", "images": ["images/Shaft_00892.png", "detail_png/Shaft_00892_length.png", "detail_png/Shaft_00892_diam.png", "detail_png/Shaft_00892_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 306.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 242.6 mm (from Z=0.0 to Z=242.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00419", "images": ["images/Shaft_00419.png", "detail_png/Shaft_00419_length.png", "detail_png/Shaft_00419_diam.png", "detail_png/Shaft_00419_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø64.5 mm and length at least 230.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.2 mm over length 57.8 mm (from Z=0.0 to Z=215.0).\n10. Finish turn diameter Ø46.7 mm over length 30.8 mm (from Z=0.0 to Z=157.2).\n11. Finish turn diameter Ø30.4 mm over length 51.4 mm (from Z=0.0 to Z=126.4).\n12. Finish turn diameter Ø30.0 mm over length 75.0 mm (from Z=0.0 to Z=75.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03760", "images": ["images/Shaft_03760.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.5 mm and length at least 239.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.5 mm over length 33.6 mm (from Z=0.0 to Z=192.0).\n10. Finish turn diameter Ø46.5 mm over length 71.5 mm (from Z=0.0 to Z=158.4).\n11. Finish turn diameter Ø30.0 mm over length 86.9 mm (from Z=0.0 to Z=86.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01393", "images": ["images/Shaft_01393.png", "detail_png/Shaft_01393_length.png", "detail_png/Shaft_01393_diam.png", "detail_png/Shaft_01393_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 313.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 219.7 mm (from Z=0.0 to Z=219.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.3 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01687", "images": ["images/Shaft_01687.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.8 mm and length at least 286.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.4 mm over length 50.1 mm (from Z=0.0 to Z=255.5).\n10. Finish turn diameter Ø30.0 mm over length 205.4 mm (from Z=0.0 to Z=205.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01986", "images": ["images/Shaft_01986.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.1 mm and length at least 131.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.4 mm over length 55.8 mm (from Z=0.0 to Z=96.0).\n9. Finish turn diameter Ø30.0 mm over length 40.2 mm (from Z=0.0 to Z=40.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03189", "images": ["images/Shaft_03189.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.1 mm and length at least 262.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 68.0 mm (from Z=0.0 to Z=68.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.1 mm over length 40.1 mm (from Z=0.0 to Z=189.1).\n10. Finish turn diameter Ø30.0 mm over length 149.0 mm (from Z=0.0 to Z=149.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03888", "images": ["images/Shaft_03888.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.9 mm and length at least 152.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.9 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 53.5 mm (from Z=0.0 to Z=96.1).\n9. Finish turn diameter Ø35.3 mm over length 5.4 mm (from Z=0.0 to Z=42.6).\n10. Finish turn diameter Ø30.0 mm over length 37.2 mm (from Z=0.0 to Z=37.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01152", "images": ["images/Shaft_01152.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 125.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 92.6 mm (from Z=0.0 to Z=92.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.9 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02122", "images": ["images/Shaft_02122.png", "detail_png/Shaft_02122_length.png", "detail_png/Shaft_02122_diam.png", "detail_png/Shaft_02122_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø76.6 mm and length at least 285.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.6 mm over length 135.7 mm (from Z=0.0 to Z=135.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.1 mm over length 39.7 mm (from Z=0.0 to Z=145.2).\n10. Finish turn diameter Ø54.5 mm over length 105.5 mm (from Z=0.0 to Z=105.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03830", "images": ["images/Shaft_03830.png", "detail_png/Shaft_03830_length.png", "detail_png/Shaft_03830_diam.png", "detail_png/Shaft_03830_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.2 mm and length at least 267.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.2 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 218.5 mm (from Z=0.0 to Z=218.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04322", "images": ["images/Shaft_04322.png", "detail_png/Shaft_04322_length.png", "detail_png/Shaft_04322_diam.png", "detail_png/Shaft_04322_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.9 mm and length at least 207.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.9 mm over length 5.6 mm (from Z=0.0 to Z=152.7).\n10. Finish turn diameter Ø30.0 mm over length 147.1 mm (from Z=0.0 to Z=147.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04824", "images": ["images/Shaft_04824.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.3 mm and length at least 301.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.9 mm over length 83.1 mm (from Z=0.0 to Z=269.6).\n10. Finish turn diameter Ø55.6 mm over length 137.8 mm (from Z=0.0 to Z=186.5).\n11. Finish turn diameter Ø37.8 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04210", "images": ["images/Shaft_04210.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.4 mm and length at least 273.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.4 mm over length 31.9 mm (from Z=0.0 to Z=31.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.7 mm over length 29.7 mm (from Z=0.0 to Z=236.4).\n10. Finish turn diameter Ø30.0 mm over length 206.7 mm (from Z=0.0 to Z=206.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04942", "images": ["images/Shaft_04942.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.9 mm and length at least 168.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 81.0 mm (from Z=0.0 to Z=81.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.1 mm over length 32.9 mm (from Z=0.0 to Z=82.9).\n9. Finish turn diameter Ø60.2 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04413", "images": ["images/Shaft_04413.png", "detail_png/Shaft_04413_length.png", "detail_png/Shaft_04413_diam.png", "detail_png/Shaft_04413_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.2 mm and length at least 195.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.2 mm over length 79.9 mm (from Z=0.0 to Z=79.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.5 mm over length 70.7 mm (from Z=0.0 to Z=110.8).\n10. Finish turn diameter Ø31.2 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02188", "images": ["images/Shaft_02188.png", "detail_png/Shaft_02188_length.png", "detail_png/Shaft_02188_diam.png", "detail_png/Shaft_02188_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.8 mm and length at least 97.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.1 mm over length 9.3 mm (from Z=0.0 to Z=71.7).\n9. Finish turn diameter Ø30.0 mm over length 62.4 mm (from Z=0.0 to Z=62.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00392", "images": ["images/Shaft_00392.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.8 mm and length at least 91.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.8 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.5 mm over length 42.4 mm (from Z=0.0 to Z=71.5).\n9. Finish turn diameter Ø39.9 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01484", "images": ["images/Shaft_01484.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.6 mm and length at least 139.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.6 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.0 mm over length 58.2 mm (from Z=0.0 to Z=103.4).\n9. Finish turn diameter Ø50.5 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02819", "images": ["images/Shaft_02819.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.1 mm and length at least 279.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 52.0 mm (from Z=0.0 to Z=52.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.6 mm over length 104.5 mm (from Z=0.0 to Z=222.4).\n10. Finish turn diameter Ø46.2 mm over length 117.9 mm (from Z=0.0 to Z=117.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02858", "images": ["images/Shaft_02858.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 88.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 58.3 mm (from Z=0.0 to Z=58.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.9 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02807", "images": ["images/Shaft_02807.png", "detail_png/Shaft_02807_length.png", "detail_png/Shaft_02807_diam.png", "detail_png/Shaft_02807_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.6 mm and length at least 90.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.6 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.5 mm over length 5.4 mm (from Z=0.0 to Z=56.2).\n9. Finish turn diameter Ø42.2 mm over length 19.7 mm (from Z=0.0 to Z=50.8).\n10. Finish turn diameter Ø30.0 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01111", "images": ["images/Shaft_01111.png", "detail_png/Shaft_01111_length.png", "detail_png/Shaft_01111_diam.png", "detail_png/Shaft_01111_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 113.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 87.5 mm (from Z=0.0 to Z=87.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.1 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01233", "images": ["images/Shaft_01233.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.4 mm and length at least 127.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.4 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.7 mm over length 22.6 mm (from Z=0.0 to Z=107.2).\n9. Finish turn diameter Ø32.4 mm over length 70.9 mm (from Z=0.0 to Z=84.6).\n10. Finish turn diameter Ø30.0 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03276", "images": ["images/Shaft_03276.png", "detail_png/Shaft_03276_length.png", "detail_png/Shaft_03276_diam.png", "detail_png/Shaft_03276_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.8 mm and length at least 87.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.8 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.1 mm over length 23.7 mm (from Z=0.0 to Z=71.1).\n9. Finish turn diameter Ø39.1 mm over length 5.9 mm (from Z=0.0 to Z=47.4).\n10. Finish turn diameter Ø30.0 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02805", "images": ["images/Shaft_02805.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.0 mm and length at least 66.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.4 mm over length 25.9 mm (from Z=0.0 to Z=30.9).\n9. Finish turn diameter Ø53.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03461", "images": ["images/Shaft_03461.png", "detail_png/Shaft_03461_length.png", "detail_png/Shaft_03461_diam.png", "detail_png/Shaft_03461_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.7 mm and length at least 147.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.0 mm over length 19.1 mm (from Z=0.0 to Z=90.2).\n9. Finish turn diameter Ø59.9 mm over length 7.6 mm (from Z=0.0 to Z=71.1).\n10. Finish turn diameter Ø43.0 mm over length 40.0 mm (from Z=0.0 to Z=63.5).\n11. Finish turn diameter Ø30.0 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04764", "images": ["images/Shaft_04764.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.2 mm and length at least 189.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.9 mm over length 47.6 mm (from Z=0.0 to Z=129.5).\n9. Finish turn diameter Ø30.0 mm over length 81.9 mm (from Z=0.0 to Z=81.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01295", "images": ["images/Shaft_01295.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.2 mm and length at least 306.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 65.8 mm (from Z=0.0 to Z=246.2).\n10. Finish turn diameter Ø30.0 mm over length 180.4 mm (from Z=0.0 to Z=180.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03573", "images": ["images/Shaft_03573.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.8 mm and length at least 320.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 255.8 mm (from Z=0.0 to Z=255.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01321", "images": ["images/Shaft_01321.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.0 mm and length at least 238.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.5 mm over length 7.3 mm (from Z=0.0 to Z=183.2).\n10. Finish turn diameter Ø55.0 mm over length 32.5 mm (from Z=0.0 to Z=175.9).\n11. Finish turn diameter Ø40.7 mm over length 64.1 mm (from Z=0.0 to Z=143.4).\n12. Finish turn diameter Ø30.0 mm over length 79.3 mm (from Z=0.0 to Z=79.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02227", "images": ["images/Shaft_02227.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.6 mm and length at least 100.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.6 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 76.9 mm (from Z=0.0 to Z=76.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00684", "images": ["images/Shaft_00684.png", "detail_png/Shaft_00684_length.png", "detail_png/Shaft_00684_diam.png", "detail_png/Shaft_00684_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.9 mm and length at least 87.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.3 mm over length 9.3 mm (from Z=0.0 to Z=65.3).\n9. Finish turn diameter Ø30.0 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03082", "images": ["images/Shaft_03082.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.9 mm and length at least 262.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 86.6 mm (from Z=0.0 to Z=236.9).\n10. Finish turn diameter Ø30.0 mm over length 150.3 mm (from Z=0.0 to Z=150.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04941", "images": ["images/Shaft_04941.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.6 mm and length at least 135.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.3 mm over length 17.6 mm (from Z=0.0 to Z=115.9).\n9. Finish turn diameter Ø48.4 mm over length 31.7 mm (from Z=0.0 to Z=98.3).\n10. Finish turn diameter Ø45.0 mm over length 11.5 mm (from Z=0.0 to Z=66.6).\n11. Finish turn diameter Ø37.4 mm over length 36.8 mm (from Z=0.0 to Z=55.1).\n12. Finish turn diameter Ø32.1 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00387", "images": ["images/Shaft_00387.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.5 mm and length at least 171.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.6 mm over length 46.3 mm (from Z=0.0 to Z=132.4).\n9. Finish turn diameter Ø39.0 mm over length 9.7 mm (from Z=0.0 to Z=86.1).\n10. Finish turn diameter Ø33.4 mm over length 30.6 mm (from Z=0.0 to Z=76.4).\n11. Finish turn diameter Ø30.0 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03786", "images": ["images/Shaft_03786.png", "detail_png/Shaft_03786_length.png", "detail_png/Shaft_03786_diam.png", "detail_png/Shaft_03786_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 226.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 151.5 mm (from Z=0.0 to Z=151.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.9 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00750", "images": ["images/Shaft_00750.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.7 mm and length at least 198.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 145.2 mm (from Z=0.0 to Z=145.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 28.9 mm (from Z=0.0 to Z=48.6).\n10. Finish turn diameter Ø46.8 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04948", "images": ["images/Shaft_04948.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.3 mm and length at least 128.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.3 mm over length 38.6 mm (from Z=0.0 to Z=118.9).\n9. Finish turn diameter Ø53.9 mm over length 7.4 mm (from Z=0.0 to Z=80.3).\n10. Finish turn diameter Ø35.9 mm over length 14.7 mm (from Z=0.0 to Z=72.9).\n11. Finish turn diameter Ø30.0 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03139", "images": ["images/Shaft_03139.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.9 mm and length at least 177.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.1 mm over length 23.4 mm (from Z=0.0 to Z=125.5).\n9. Finish turn diameter Ø31.5 mm over length 29.7 mm (from Z=0.0 to Z=102.1).\n10. Finish turn diameter Ø30.0 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00793", "images": ["images/Shaft_00793.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.3 mm and length at least 88.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 9.5 mm (from Z=0.0 to Z=78.0).\n9. Finish turn diameter Ø47.3 mm over length 9.9 mm (from Z=0.0 to Z=68.5).\n10. Finish turn diameter Ø31.5 mm over length 23.8 mm (from Z=0.0 to Z=58.6).\n11. Finish turn diameter Ø30.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04699", "images": ["images/Shaft_04699.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.3 mm and length at least 147.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.9 mm (from Z=0.0 to Z=111.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00314", "images": ["images/Shaft_00314.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 257.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 149.7 mm (from Z=0.0 to Z=149.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.1 mm over length 102.3 mm (from Z=0.0 to Z=102.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02617", "images": ["images/Shaft_02617.png", "detail_png/Shaft_02617_length.png", "detail_png/Shaft_02617_diam.png", "detail_png/Shaft_02617_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 92.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02169", "images": ["images/Shaft_02169.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.2 mm and length at least 214.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.2 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.7 mm over length 33.9 mm (from Z=0.0 to Z=165.5).\n10. Finish turn diameter Ø40.3 mm over length 37.1 mm (from Z=0.0 to Z=131.6).\n11. Finish turn diameter Ø30.0 mm over length 94.5 mm (from Z=0.0 to Z=94.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04076", "images": ["images/Shaft_04076.png", "detail_png/Shaft_04076_length.png", "detail_png/Shaft_04076_diam.png", "detail_png/Shaft_04076_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.6 mm and length at least 125.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.6 mm over length 18.0 mm (from Z=0.0 to Z=90.5).\n9. Finish turn diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03961", "images": ["images/Shaft_03961.png", "detail_png/Shaft_03961_length.png", "detail_png/Shaft_03961_diam.png", "detail_png/Shaft_03961_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.0 mm and length at least 225.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.9 mm over length 67.8 mm (from Z=0.0 to Z=197.5).\n10. Finish turn diameter Ø56.6 mm over length 19.7 mm (from Z=0.0 to Z=129.7).\n11. Finish turn diameter Ø37.6 mm over length 12.4 mm (from Z=0.0 to Z=110.0).\n12. Finish turn diameter Ø30.0 mm over length 97.6 mm (from Z=0.0 to Z=97.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04168", "images": ["images/Shaft_04168.png", "detail_png/Shaft_04168_length.png", "detail_png/Shaft_04168_diam.png", "detail_png/Shaft_04168_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.9 mm and length at least 257.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.9 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 52.2 mm (from Z=0.0 to Z=194.2).\n10. Finish turn diameter Ø35.9 mm over length 61.2 mm (from Z=0.0 to Z=142.0).\n11. Finish turn diameter Ø30.0 mm over length 80.8 mm (from Z=0.0 to Z=80.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04237", "images": ["images/Shaft_04237.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.5 mm and length at least 264.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.5 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 42.3 mm (from Z=0.0 to Z=215.0).\n10. Finish turn diameter Ø30.0 mm over length 172.7 mm (from Z=0.0 to Z=172.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04662", "images": ["images/Shaft_04662.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.9 mm and length at least 103.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04691", "images": ["images/Shaft_04691.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.1 mm and length at least 279.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.0 mm over length 41.9 mm (from Z=0.0 to Z=258.0).\n10. Finish turn diameter Ø31.9 mm over length 21.3 mm (from Z=0.0 to Z=216.1).\n11. Finish turn diameter Ø30.0 mm over length 194.8 mm (from Z=0.0 to Z=194.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04131", "images": ["images/Shaft_04131.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.9 mm and length at least 303.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 116.6 mm (from Z=0.0 to Z=116.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.6 mm (from Z=0.0 to Z=181.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01479", "images": ["images/Shaft_01479.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.8 mm and length at least 165.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.5 mm over length 34.9 mm (from Z=0.0 to Z=134.6).\n9. Finish turn diameter Ø46.7 mm over length 46.3 mm (from Z=0.0 to Z=99.7).\n10. Finish turn diameter Ø38.6 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01116", "images": ["images/Shaft_01116.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.0 mm and length at least 219.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 24.4 mm (from Z=0.0 to Z=24.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.2 mm over length 17.2 mm (from Z=0.0 to Z=190.1).\n10. Finish turn diameter Ø30.0 mm over length 172.9 mm (from Z=0.0 to Z=172.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00216", "images": ["images/Shaft_00216.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.2 mm and length at least 283.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 32.1 mm (from Z=0.0 to Z=32.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 63.2 mm (from Z=0.0 to Z=246.0).\n10. Finish turn diameter Ø41.3 mm over length 89.9 mm (from Z=0.0 to Z=182.8).\n11. Finish turn diameter Ø30.0 mm over length 92.9 mm (from Z=0.0 to Z=92.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00668", "images": ["images/Shaft_00668.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.4 mm and length at least 70.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.4 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 51.1 mm (from Z=0.0 to Z=51.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03931", "images": ["images/Shaft_03931.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 93.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.5 mm over length 18.5 mm (from Z=0.0 to Z=18.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00554", "images": ["images/Shaft_00554.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.4 mm and length at least 215.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.2 mm over length 14.4 mm (from Z=0.0 to Z=176.9).\n10. Finish turn diameter Ø37.0 mm over length 75.0 mm (from Z=0.0 to Z=162.5).\n11. Finish turn diameter Ø30.9 mm over length 87.5 mm (from Z=0.0 to Z=87.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02839", "images": ["images/Shaft_02839.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.3 mm and length at least 243.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 158.3 mm (from Z=0.0 to Z=158.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.3 mm over length 19.1 mm (from Z=0.0 to Z=80.2).\n10. Finish turn diameter Ø61.3 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03597", "images": ["images/Shaft_03597.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.1 mm and length at least 99.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.1 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.8 mm over length 33.6 mm (from Z=0.0 to Z=80.8).\n9. Finish turn diameter Ø30.0 mm over length 47.2 mm (from Z=0.0 to Z=47.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01888", "images": ["images/Shaft_01888.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.5 mm and length at least 186.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 59.5 mm (from Z=0.0 to Z=111.7).\n9. Finish turn diameter Ø39.9 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01309", "images": ["images/Shaft_01309.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.8 mm and length at least 127.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.5 mm (from Z=0.0 to Z=100.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00598", "images": ["images/Shaft_00598.png", "detail_png/Shaft_00598_length.png", "detail_png/Shaft_00598_diam.png", "detail_png/Shaft_00598_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.9 mm and length at least 192.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.9 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 67.9 mm (from Z=0.0 to Z=140.2).\n9. Finish turn diameter Ø34.4 mm over length 27.9 mm (from Z=0.0 to Z=72.3).\n10. Finish turn diameter Ø30.0 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00239", "images": ["images/Shaft_00239.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.4 mm and length at least 115.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02382", "images": ["images/Shaft_02382.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.3 mm and length at least 189.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.6 mm over length 47.4 mm (from Z=0.0 to Z=138.0).\n10. Finish turn diameter Ø30.0 mm over length 90.6 mm (from Z=0.0 to Z=90.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00667", "images": ["images/Shaft_00667.png", "detail_png/Shaft_00667_length.png", "detail_png/Shaft_00667_diam.png", "detail_png/Shaft_00667_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.2 mm and length at least 251.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.5 mm over length 12.6 mm (from Z=0.0 to Z=193.4).\n10. Finish turn diameter Ø34.0 mm over length 50.2 mm (from Z=0.0 to Z=180.8).\n11. Finish turn diameter Ø30.0 mm over length 130.6 mm (from Z=0.0 to Z=130.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01063", "images": ["images/Shaft_01063.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.4 mm and length at least 182.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.3 mm over length 38.1 mm (from Z=0.0 to Z=161.9).\n10. Finish turn diameter Ø30.0 mm over length 123.8 mm (from Z=0.0 to Z=123.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03462", "images": ["images/Shaft_03462.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 76.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.5 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00071", "images": ["images/Shaft_00071.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.9 mm and length at least 117.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 5.2 mm (from Z=0.0 to Z=71.2).\n9. Finish turn diameter Ø33.9 mm over length 5.0 mm (from Z=0.0 to Z=66.0).\n10. Finish turn diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02356", "images": ["images/Shaft_02356.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.6 mm and length at least 105.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 5.8 mm (from Z=0.0 to Z=5.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.1 mm over length 30.6 mm (from Z=0.0 to Z=94.4).\n9. Finish turn diameter Ø31.6 mm over length 26.1 mm (from Z=0.0 to Z=63.8).\n10. Finish turn diameter Ø30.0 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03002", "images": ["images/Shaft_03002.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.4 mm and length at least 193.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 7.7 mm (from Z=0.0 to Z=7.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.2 mm over length 55.8 mm (from Z=0.0 to Z=180.4).\n10. Finish turn diameter Ø30.0 mm over length 124.6 mm (from Z=0.0 to Z=124.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02099", "images": ["images/Shaft_02099.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.6 mm and length at least 224.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.8 mm over length 47.7 mm (from Z=0.0 to Z=94.0).\n10. Finish turn diameter Ø59.9 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01528", "images": ["images/Shaft_01528.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 115.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 91.6 mm (from Z=0.0 to Z=91.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.1 mm over length 18.6 mm (from Z=0.0 to Z=18.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00489", "images": ["images/Shaft_00489.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.2 mm and length at least 295.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 48.5 mm (from Z=0.0 to Z=262.1).\n10. Finish turn diameter Ø43.9 mm over length 98.5 mm (from Z=0.0 to Z=213.6).\n11. Finish turn diameter Ø30.3 mm over length 86.5 mm (from Z=0.0 to Z=115.1).\n12. Finish turn diameter Ø30.0 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03351", "images": ["images/Shaft_03351.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.8 mm and length at least 138.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 103.1 mm (from Z=0.0 to Z=103.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02843", "images": ["images/Shaft_02843.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 109.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.8 mm (from Z=0.0 to Z=60.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.9 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04566", "images": ["images/Shaft_04566.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.4 mm and length at least 181.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.4 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 158.7 mm (from Z=0.0 to Z=158.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02809", "images": ["images/Shaft_02809.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.5 mm and length at least 185.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.0 mm over length 26.8 mm (from Z=0.0 to Z=141.2).\n9. Finish turn diameter Ø46.6 mm over length 19.4 mm (from Z=0.0 to Z=114.4).\n10. Finish turn diameter Ø40.0 mm over length 37.0 mm (from Z=0.0 to Z=95.0).\n11. Finish turn diameter Ø30.0 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02572", "images": ["images/Shaft_02572.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.6 mm and length at least 269.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.1 mm over length 58.4 mm (from Z=0.0 to Z=223.9).\n10. Finish turn diameter Ø30.0 mm over length 165.5 mm (from Z=0.0 to Z=165.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01056", "images": ["images/Shaft_01056.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.3 mm and length at least 196.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.6 mm over length 58.2 mm (from Z=0.0 to Z=143.3).\n10. Finish turn diameter Ø52.9 mm over length 40.9 mm (from Z=0.0 to Z=85.1).\n11. Finish turn diameter Ø42.2 mm over length 34.9 mm (from Z=0.0 to Z=44.2).\n12. Finish turn diameter Ø30.0 mm over length 9.3 mm (from Z=0.0 to Z=9.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03556", "images": ["images/Shaft_03556.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø34.8 mm and length at least 147.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.8 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 121.0 mm (from Z=0.0 to Z=121.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01786", "images": ["images/Shaft_01786.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.9 mm and length at least 228.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 97.1 mm (from Z=0.0 to Z=97.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.4 mm over length 12.2 mm (from Z=0.0 to Z=126.6).\n10. Finish turn diameter Ø39.2 mm over length 64.8 mm (from Z=0.0 to Z=114.4).\n11. Finish turn diameter Ø31.8 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02316", "images": ["images/Shaft_02316.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.3 mm and length at least 323.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 254.2 mm (from Z=0.0 to Z=254.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01968", "images": ["images/Shaft_01968.png", "detail_png/Shaft_01968_length.png", "detail_png/Shaft_01968_diam.png", "detail_png/Shaft_01968_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.9 mm and length at least 289.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 19.5 mm (from Z=0.0 to Z=19.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 265.2 mm (from Z=0.0 to Z=265.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02380", "images": ["images/Shaft_02380.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.2 mm and length at least 170.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.7 mm over length 45.9 mm (from Z=0.0 to Z=135.2).\n9. Finish turn diameter Ø42.1 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04576", "images": ["images/Shaft_04576.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.2 mm and length at least 178.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.2 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.4 mm over length 47.2 mm (from Z=0.0 to Z=138.1).\n9. Finish turn diameter Ø40.0 mm over length 90.9 mm (from Z=0.0 to Z=90.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03053", "images": ["images/Shaft_03053.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.7 mm and length at least 212.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.3 mm over length 50.7 mm (from Z=0.0 to Z=154.1).\n10. Finish turn diameter Ø34.8 mm over length 42.3 mm (from Z=0.0 to Z=103.4).\n11. Finish turn diameter Ø30.0 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02453", "images": ["images/Shaft_02453.png", "detail_png/Shaft_02453_length.png", "detail_png/Shaft_02453_diam.png", "detail_png/Shaft_02453_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.3 mm and length at least 162.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 7.1 mm (from Z=0.0 to Z=138.1).\n10. Finish turn diameter Ø30.0 mm over length 131.0 mm (from Z=0.0 to Z=131.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00273", "images": ["images/Shaft_00273.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.2 mm and length at least 238.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 77.0 mm (from Z=0.0 to Z=217.7).\n10. Finish turn diameter Ø58.4 mm over length 16.7 mm (from Z=0.0 to Z=140.7).\n11. Finish turn diameter Ø44.0 mm over length 49.2 mm (from Z=0.0 to Z=124.0).\n12. Finish turn diameter Ø30.5 mm over length 51.6 mm (from Z=0.0 to Z=74.8).\n13. Finish turn diameter Ø30.0 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02019", "images": ["images/Shaft_02019.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.9 mm and length at least 185.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 52.7 mm (from Z=0.0 to Z=52.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.8 mm over length 68.7 mm (from Z=0.0 to Z=127.3).\n9. Finish turn diameter Ø47.6 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04165", "images": ["images/Shaft_04165.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.9 mm and length at least 135.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 47.4 mm (from Z=0.0 to Z=47.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.2 mm over length 29.5 mm (from Z=0.0 to Z=83.2).\n9. Finish turn diameter Ø37.7 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03132", "images": ["images/Shaft_03132.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.0 mm and length at least 107.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.0 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.9 mm over length 32.1 mm (from Z=0.0 to Z=90.5).\n9. Finish turn diameter Ø52.4 mm over length 31.3 mm (from Z=0.0 to Z=58.4).\n10. Finish turn diameter Ø48.2 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04225", "images": ["images/Shaft_04225.png", "detail_png/Shaft_04225_length.png", "detail_png/Shaft_04225_diam.png", "detail_png/Shaft_04225_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.6 mm and length at least 300.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 239.4 mm (from Z=0.0 to Z=239.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04586", "images": ["images/Shaft_04586.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.6 mm and length at least 128.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.1 mm (from Z=0.0 to Z=100.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01002", "images": ["images/Shaft_01002.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.9 mm and length at least 201.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 66.0 mm (from Z=0.0 to Z=138.0).\n10. Finish turn diameter Ø44.1 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02641", "images": ["images/Shaft_02641.png", "detail_png/Shaft_02641_length.png", "detail_png/Shaft_02641_diam.png", "detail_png/Shaft_02641_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.5 mm and length at least 256.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 12.4 mm (from Z=0.0 to Z=12.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.9 mm over length 63.9 mm (from Z=0.0 to Z=238.7).\n10. Finish turn diameter Ø48.2 mm over length 39.4 mm (from Z=0.0 to Z=174.8).\n11. Finish turn diameter Ø31.0 mm over length 41.7 mm (from Z=0.0 to Z=135.4).\n12. Finish turn diameter Ø30.0 mm over length 93.7 mm (from Z=0.0 to Z=93.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02817", "images": ["images/Shaft_02817.png", "detail_png/Shaft_02817_length.png", "detail_png/Shaft_02817_diam.png", "detail_png/Shaft_02817_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.6 mm and length at least 123.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 104.8 mm (from Z=0.0 to Z=104.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03952", "images": ["images/Shaft_03952.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.8 mm and length at least 308.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 26.8 mm (from Z=0.0 to Z=26.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 145.0 mm (from Z=0.0 to Z=276.2).\n10. Finish turn diameter Ø30.0 mm over length 131.2 mm (from Z=0.0 to Z=131.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02014", "images": ["images/Shaft_02014.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.8 mm and length at least 271.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 140.0 mm (from Z=0.0 to Z=140.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.5 mm over length 23.4 mm (from Z=0.0 to Z=126.0).\n10. Finish turn diameter Ø37.3 mm over length 102.6 mm (from Z=0.0 to Z=102.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00734", "images": ["images/Shaft_00734.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø36.8 mm and length at least 267.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 98.3 mm (from Z=0.0 to Z=98.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.4 mm (from Z=0.0 to Z=164.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01708", "images": ["images/Shaft_01708.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.1 mm and length at least 121.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.3 mm over length 32.4 mm (from Z=0.0 to Z=94.7).\n9. Finish turn diameter Ø39.7 mm over length 23.0 mm (from Z=0.0 to Z=62.3).\n10. Finish turn diameter Ø34.3 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04461", "images": ["images/Shaft_04461.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.2 mm and length at least 192.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.9 mm over length 90.1 mm (from Z=0.0 to Z=176.6).\n9. Finish turn diameter Ø40.4 mm over length 86.5 mm (from Z=0.0 to Z=86.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03656", "images": ["images/Shaft_03656.png", "detail_png/Shaft_03656_length.png", "detail_png/Shaft_03656_diam.png", "detail_png/Shaft_03656_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.3 mm and length at least 181.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 31.5 mm (from Z=0.0 to Z=133.6).\n9. Finish turn diameter Ø36.5 mm over length 65.5 mm (from Z=0.0 to Z=102.1).\n10. Finish turn diameter Ø30.0 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04055", "images": ["images/Shaft_04055.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.3 mm and length at least 285.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.3 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.9 mm over length 51.0 mm (from Z=0.0 to Z=231.5).\n10. Finish turn diameter Ø30.0 mm over length 180.5 mm (from Z=0.0 to Z=180.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02678", "images": ["images/Shaft_02678.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.9 mm and length at least 136.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.9 mm over length 18.0 mm (from Z=0.0 to Z=121.6).\n9. Finish turn diameter Ø58.9 mm over length 37.7 mm (from Z=0.0 to Z=103.6).\n10. Finish turn diameter Ø50.0 mm over length 43.1 mm (from Z=0.0 to Z=65.9).\n11. Finish turn diameter Ø38.0 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00508", "images": ["images/Shaft_00508.png", "detail_png/Shaft_00508_length.png", "detail_png/Shaft_00508_diam.png", "detail_png/Shaft_00508_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.7 mm and length at least 250.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.7 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 98.9 mm (from Z=0.0 to Z=222.7).\n10. Finish turn diameter Ø40.7 mm over length 123.8 mm (from Z=0.0 to Z=123.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01935", "images": ["images/Shaft_01935.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.5 mm and length at least 67.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 6.0 mm (from Z=0.0 to Z=6.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.5 mm over length 5.0 mm (from Z=0.0 to Z=56.9).\n9. Finish turn diameter Ø30.0 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02607", "images": ["images/Shaft_02607.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.8 mm and length at least 115.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.0 mm over length 18.1 mm (from Z=0.0 to Z=101.5).\n9. Finish turn diameter Ø51.8 mm over length 38.1 mm (from Z=0.0 to Z=83.4).\n10. Finish turn diameter Ø39.0 mm over length 7.5 mm (from Z=0.0 to Z=45.3).\n11. Finish turn diameter Ø30.0 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04923", "images": ["images/Shaft_04923.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.1 mm and length at least 79.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.9 mm over length 33.1 mm (from Z=0.0 to Z=59.3).\n9. Finish turn diameter Ø30.0 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02623", "images": ["images/Shaft_02623.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.4 mm and length at least 83.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01229", "images": ["images/Shaft_01229.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 217.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 147.9 mm (from Z=0.0 to Z=147.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.2 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01075", "images": ["images/Shaft_01075.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.7 mm and length at least 132.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.7 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.8 mm (from Z=0.0 to Z=111.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04103", "images": ["images/Shaft_04103.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 158.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 123.6 mm (from Z=0.0 to Z=123.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.1 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00010", "images": ["images/Shaft_00010.png", "detail_png/Shaft_00010_length.png", "detail_png/Shaft_00010_diam.png", "detail_png/Shaft_00010_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.8 mm and length at least 98.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 62.8 mm (from Z=0.0 to Z=62.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03240", "images": ["images/Shaft_03240.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.2 mm and length at least 200.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.2 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 87.8 mm (from Z=0.0 to Z=153.5).\n10. Finish turn diameter Ø56.0 mm over length 26.0 mm (from Z=0.0 to Z=65.7).\n11. Finish turn diameter Ø48.5 mm over length 39.7 mm (from Z=0.0 to Z=39.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00109", "images": ["images/Shaft_00109.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.0 mm and length at least 262.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.2 mm over length 34.7 mm (from Z=0.0 to Z=197.2).\n10. Finish turn diameter Ø34.7 mm over length 90.1 mm (from Z=0.0 to Z=162.5).\n11. Finish turn diameter Ø30.0 mm over length 72.4 mm (from Z=0.0 to Z=72.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04903", "images": ["images/Shaft_04903.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 224.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 213.7 mm (from Z=0.0 to Z=213.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 6.1 mm (from Z=0.0 to Z=6.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04798", "images": ["images/Shaft_04798.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.8 mm and length at least 275.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.7 mm over length 38.6 mm (from Z=0.0 to Z=214.9).\n10. Finish turn diameter Ø30.0 mm over length 176.3 mm (from Z=0.0 to Z=176.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04334", "images": ["images/Shaft_04334.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.2 mm and length at least 98.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.7 mm over length 8.0 mm (from Z=0.0 to Z=74.5).\n9. Finish turn diameter Ø40.5 mm over length 27.2 mm (from Z=0.0 to Z=66.5).\n10. Finish turn diameter Ø30.0 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02290", "images": ["images/Shaft_02290.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.1 mm and length at least 100.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.0 mm over length 23.6 mm (from Z=0.0 to Z=75.7).\n9. Finish turn diameter Ø31.1 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02023", "images": ["images/Shaft_02023.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 100.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø19.2 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01244", "images": ["images/Shaft_01244.png", "detail_png/Shaft_01244_length.png", "detail_png/Shaft_01244_diam.png", "detail_png/Shaft_01244_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.4 mm and length at least 291.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.4 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.1 mm over length 28.1 mm (from Z=0.0 to Z=262.1).\n10. Finish turn diameter Ø43.8 mm over length 78.5 mm (from Z=0.0 to Z=234.0).\n11. Finish turn diameter Ø36.9 mm over length 58.9 mm (from Z=0.0 to Z=155.5).\n12. Finish turn diameter Ø30.0 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02397", "images": ["images/Shaft_02397.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.8 mm and length at least 292.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 88.7 mm (from Z=0.0 to Z=88.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.2 mm over length 102.1 mm (from Z=0.0 to Z=198.4).\n10. Finish turn diameter Ø54.9 mm over length 96.3 mm (from Z=0.0 to Z=96.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03418", "images": ["images/Shaft_03418.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.9 mm and length at least 138.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.2 mm over length 39.4 mm (from Z=0.0 to Z=105.6).\n9. Finish turn diameter Ø38.7 mm over length 26.8 mm (from Z=0.0 to Z=66.2).\n10. Finish turn diameter Ø30.0 mm over length 39.4 mm (from Z=0.0 to Z=39.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01236", "images": ["images/Shaft_01236.png", "detail_png/Shaft_01236_length.png", "detail_png/Shaft_01236_diam.png", "detail_png/Shaft_01236_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.9 mm and length at least 320.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 128.2 mm (from Z=0.0 to Z=128.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.9 mm over length 45.2 mm (from Z=0.0 to Z=187.7).\n10. Finish turn diameter Ø45.9 mm over length 81.3 mm (from Z=0.0 to Z=142.5).\n11. Finish turn diameter Ø30.0 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03384", "images": ["images/Shaft_03384.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.7 mm and length at least 128.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.0 mm over length 8.3 mm (from Z=0.0 to Z=99.9).\n9. Finish turn diameter Ø51.8 mm over length 39.9 mm (from Z=0.0 to Z=91.6).\n10. Finish turn diameter Ø48.2 mm over length 16.7 mm (from Z=0.0 to Z=51.7).\n11. Finish turn diameter Ø34.3 mm over length 17.1 mm (from Z=0.0 to Z=35.0).\n12. Finish turn diameter Ø30.0 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03370", "images": ["images/Shaft_03370.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 71.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.5 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00172", "images": ["images/Shaft_00172.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.9 mm and length at least 188.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 33.9 mm (from Z=0.0 to Z=33.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.9 mm (from Z=0.0 to Z=149.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02009", "images": ["images/Shaft_02009.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 172.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.3 mm over length 22.1 mm (from Z=0.0 to Z=137.8).\n9. Finish turn diameter Ø47.9 mm over length 8.4 mm (from Z=0.0 to Z=115.7).\n10. Finish turn diameter Ø40.9 mm over length 48.2 mm (from Z=0.0 to Z=107.3).\n11. Finish turn diameter Ø30.0 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02268", "images": ["images/Shaft_02268.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 237.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 188.4 mm (from Z=0.0 to Z=188.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.3 mm over length 43.6 mm (from Z=0.0 to Z=43.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01185", "images": ["images/Shaft_01185.png", "detail_png/Shaft_01185_length.png", "detail_png/Shaft_01185_diam.png", "detail_png/Shaft_01185_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.2 mm and length at least 172.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.2 mm over length 34.6 mm (from Z=0.0 to Z=34.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.7 mm (from Z=0.0 to Z=132.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01563", "images": ["images/Shaft_01563.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 183.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.2 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04317", "images": ["images/Shaft_04317.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.5 mm and length at least 180.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 38.2 mm (from Z=0.0 to Z=38.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.7 mm over length 32.4 mm (from Z=0.0 to Z=136.9).\n9. Finish turn diameter Ø35.4 mm over length 20.2 mm (from Z=0.0 to Z=104.5).\n10. Finish turn diameter Ø30.0 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04805", "images": ["images/Shaft_04805.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.1 mm and length at least 185.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 135.2 mm (from Z=0.0 to Z=135.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00816", "images": ["images/Shaft_00816.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.9 mm and length at least 143.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.7 mm over length 42.1 mm (from Z=0.0 to Z=120.8).\n9. Finish turn diameter Ø30.0 mm over length 78.7 mm (from Z=0.0 to Z=78.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00560", "images": ["images/Shaft_00560.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.8 mm and length at least 305.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.4 mm over length 13.5 mm (from Z=0.0 to Z=210.6).\n10. Finish turn diameter Ø51.4 mm over length 55.5 mm (from Z=0.0 to Z=197.1).\n11. Finish turn diameter Ø39.4 mm over length 51.6 mm (from Z=0.0 to Z=141.6).\n12. Finish turn diameter Ø31.8 mm over length 90.0 mm (from Z=0.0 to Z=90.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03747", "images": ["images/Shaft_03747.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.9 mm and length at least 154.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.6 mm over length 65.2 mm (from Z=0.0 to Z=132.7).\n9. Finish turn diameter Ø30.0 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03093", "images": ["images/Shaft_03093.png", "detail_png/Shaft_03093_length.png", "detail_png/Shaft_03093_diam.png", "detail_png/Shaft_03093_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 114.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 101.6 mm (from Z=0.0 to Z=101.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.5 mm over length 7.7 mm (from Z=0.0 to Z=7.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02326", "images": ["images/Shaft_02326.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.6 mm and length at least 156.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.6 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.7 mm over length 74.7 mm (from Z=0.0 to Z=88.4).\n9. Finish turn diameter Ø40.7 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02909", "images": ["images/Shaft_02909.png", "detail_png/Shaft_02909_length.png", "detail_png/Shaft_02909_diam.png", "detail_png/Shaft_02909_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 266.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.5 mm (from Z=0.0 to Z=178.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 82.8 mm (from Z=0.0 to Z=82.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01892", "images": ["images/Shaft_01892.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.1 mm and length at least 120.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 58.0 mm (from Z=0.0 to Z=58.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.9 mm over length 50.9 mm (from Z=0.0 to Z=57.3).\n9. Finish turn diameter Ø30.0 mm over length 6.4 mm (from Z=0.0 to Z=6.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04592", "images": ["images/Shaft_04592.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.7 mm and length at least 260.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 38.6 mm (from Z=0.0 to Z=38.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 21.9 mm (from Z=0.0 to Z=216.4).\n10. Finish turn diameter Ø56.2 mm over length 116.1 mm (from Z=0.0 to Z=194.5).\n11. Finish turn diameter Ø39.7 mm over length 78.4 mm (from Z=0.0 to Z=78.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00716", "images": ["images/Shaft_00716.png", "detail_png/Shaft_00716_length.png", "detail_png/Shaft_00716_diam.png", "detail_png/Shaft_00716_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.7 mm and length at least 106.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.8 mm over length 22.4 mm (from Z=0.0 to Z=69.0).\n9. Finish turn diameter Ø30.0 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01697", "images": ["images/Shaft_01697.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.8 mm and length at least 174.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 146.1 mm (from Z=0.0 to Z=146.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01119", "images": ["images/Shaft_01119.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.3 mm and length at least 297.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.3 mm over length 103.0 mm (from Z=0.0 to Z=103.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.8 mm over length 40.3 mm (from Z=0.0 to Z=189.8).\n10. Finish turn diameter Ø51.7 mm over length 67.7 mm (from Z=0.0 to Z=149.5).\n11. Finish turn diameter Ø40.5 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03745", "images": ["images/Shaft_03745.png", "detail_png/Shaft_03745_length.png", "detail_png/Shaft_03745_diam.png", "detail_png/Shaft_03745_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.3 mm and length at least 144.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.3 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.8 mm over length 31.4 mm (from Z=0.0 to Z=121.1).\n9. Finish turn diameter Ø30.0 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02616", "images": ["images/Shaft_02616.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø82.0 mm and length at least 209.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø80.0 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø80.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.1 mm over length 49.2 mm (from Z=0.0 to Z=160.1).\n10. Finish turn diameter Ø65.8 mm over length 6.9 mm (from Z=0.0 to Z=110.9).\n11. Finish turn diameter Ø57.0 mm over length 34.6 mm (from Z=0.0 to Z=104.0).\n12. Finish turn diameter Ø43.5 mm over length 30.1 mm (from Z=0.0 to Z=69.4).\n13. Finish turn diameter Ø31.6 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04137", "images": ["images/Shaft_04137.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.9 mm and length at least 148.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.4 mm over length 12.2 mm (from Z=0.0 to Z=74.8).\n9. Finish turn diameter Ø30.0 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04429", "images": ["images/Shaft_04429.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.7 mm and length at least 84.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.4 mm over length 17.4 mm (from Z=0.0 to Z=48.9).\n9. Finish turn diameter Ø36.0 mm over length 31.5 mm (from Z=0.0 to Z=31.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04194", "images": ["images/Shaft_04194.png", "detail_png/Shaft_04194_length.png", "detail_png/Shaft_04194_diam.png", "detail_png/Shaft_04194_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.2 mm and length at least 76.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01539", "images": ["images/Shaft_01539.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.6 mm and length at least 128.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 30.5 mm (from Z=0.0 to Z=30.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.8 mm over length 21.7 mm (from Z=0.0 to Z=93.2).\n9. Finish turn diameter Ø55.4 mm over length 59.7 mm (from Z=0.0 to Z=71.5).\n10. Finish turn diameter Ø36.0 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03097", "images": ["images/Shaft_03097.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.8 mm and length at least 105.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 5.8 mm (from Z=0.0 to Z=5.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.6 mm over length 9.4 mm (from Z=0.0 to Z=94.3).\n9. Finish turn diameter Ø56.3 mm over length 11.2 mm (from Z=0.0 to Z=84.9).\n10. Finish turn diameter Ø40.4 mm over length 18.1 mm (from Z=0.0 to Z=73.7).\n11. Finish turn diameter Ø30.0 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02419", "images": ["images/Shaft_02419.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.7 mm and length at least 277.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 64.5 mm (from Z=0.0 to Z=64.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.7 mm over length 66.8 mm (from Z=0.0 to Z=208.1).\n10. Finish turn diameter Ø30.0 mm over length 141.3 mm (from Z=0.0 to Z=141.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03822", "images": ["images/Shaft_03822.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 286.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 230.3 mm (from Z=0.0 to Z=230.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00270", "images": ["images/Shaft_00270.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.4 mm and length at least 284.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.4 mm over length 52.9 mm (from Z=0.0 to Z=52.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.0 mm over length 144.1 mm (from Z=0.0 to Z=226.4).\n10. Finish turn diameter Ø55.4 mm over length 82.3 mm (from Z=0.0 to Z=82.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01373", "images": ["images/Shaft_01373.png", "detail_png/Shaft_01373_length.png", "detail_png/Shaft_01373_diam.png", "detail_png/Shaft_01373_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.8 mm and length at least 124.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 23.2 mm (from Z=0.0 to Z=23.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.7 mm over length 7.8 mm (from Z=0.0 to Z=96.1).\n9. Finish turn diameter Ø30.0 mm over length 88.3 mm (from Z=0.0 to Z=88.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04546", "images": ["images/Shaft_04546.png", "detail_png/Shaft_04546_length.png", "detail_png/Shaft_04546_diam.png", "detail_png/Shaft_04546_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.6 mm and length at least 243.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 37.3 mm (from Z=0.0 to Z=37.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.1 mm over length 34.5 mm (from Z=0.0 to Z=201.1).\n10. Finish turn diameter Ø30.0 mm over length 166.6 mm (from Z=0.0 to Z=166.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03553", "images": ["images/Shaft_03553.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.8 mm and length at least 202.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 70.8 mm (from Z=0.0 to Z=70.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 7.4 mm (from Z=0.0 to Z=127.0).\n10. Finish turn diameter Ø30.0 mm over length 119.6 mm (from Z=0.0 to Z=119.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01944", "images": ["images/Shaft_01944.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.8 mm and length at least 131.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.8 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.6 mm (from Z=0.0 to Z=100.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01242", "images": ["images/Shaft_01242.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.2 mm and length at least 181.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 147.6 mm (from Z=0.0 to Z=147.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04509", "images": ["images/Shaft_04509.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 133.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 109.5 mm (from Z=0.0 to Z=109.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.2 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00588", "images": ["images/Shaft_00588.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 163.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 99.8 mm (from Z=0.0 to Z=99.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.3 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00352", "images": ["images/Shaft_00352.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.0 mm and length at least 165.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 54.2 mm (from Z=0.0 to Z=54.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.5 mm over length 45.6 mm (from Z=0.0 to Z=106.6).\n9. Finish turn diameter Ø30.0 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02449", "images": ["images/Shaft_02449.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.7 mm and length at least 207.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.3 mm over length 66.7 mm (from Z=0.0 to Z=189.3).\n10. Finish turn diameter Ø31.0 mm over length 71.8 mm (from Z=0.0 to Z=122.6).\n11. Finish turn diameter Ø30.0 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02405", "images": ["images/Shaft_02405.png", "detail_png/Shaft_02405_length.png", "detail_png/Shaft_02405_diam.png", "detail_png/Shaft_02405_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.2 mm and length at least 90.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.2 mm over length 16.1 mm (from Z=0.0 to Z=16.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.3 mm over length 30.5 mm (from Z=0.0 to Z=69.0).\n9. Finish turn diameter Ø30.0 mm over length 38.5 mm (from Z=0.0 to Z=38.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04195", "images": ["images/Shaft_04195.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.1 mm and length at least 178.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.4 mm over length 19.3 mm (from Z=0.0 to Z=131.3).\n9. Finish turn diameter Ø42.6 mm over length 27.9 mm (from Z=0.0 to Z=112.0).\n10. Finish turn diameter Ø30.0 mm over length 84.1 mm (from Z=0.0 to Z=84.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03942", "images": ["images/Shaft_03942.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø34.6 mm and length at least 97.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.0 mm (from Z=0.0 to Z=81.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04152", "images": ["images/Shaft_04152.png", "detail_png/Shaft_04152_length.png", "detail_png/Shaft_04152_diam.png", "detail_png/Shaft_04152_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.7 mm and length at least 156.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.7 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 37.2 mm (from Z=0.0 to Z=130.8).\n9. Finish turn diameter Ø51.7 mm over length 46.9 mm (from Z=0.0 to Z=93.6).\n10. Finish turn diameter Ø44.8 mm over length 12.0 mm (from Z=0.0 to Z=46.7).\n11. Finish turn diameter Ø30.0 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03671", "images": ["images/Shaft_03671.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.1 mm and length at least 258.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.1 mm over length 58.2 mm (from Z=0.0 to Z=58.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 35.6 mm (from Z=0.0 to Z=194.9).\n10. Finish turn diameter Ø48.8 mm over length 159.3 mm (from Z=0.0 to Z=159.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04895", "images": ["images/Shaft_04895.png", "detail_png/Shaft_04895_length.png", "detail_png/Shaft_04895_diam.png", "detail_png/Shaft_04895_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.3 mm and length at least 161.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.7 mm over length 75.6 mm (from Z=0.0 to Z=146.9).\n9. Finish turn diameter Ø30.0 mm over length 71.3 mm (from Z=0.0 to Z=71.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01736", "images": ["images/Shaft_01736.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.8 mm and length at least 136.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.8 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.1 mm over length 47.0 mm (from Z=0.0 to Z=85.4).\n9. Finish turn diameter Ø30.0 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03677", "images": ["images/Shaft_03677.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.4 mm and length at least 220.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.4 mm over length 46.6 mm (from Z=0.0 to Z=46.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.2 mm over length 43.9 mm (from Z=0.0 to Z=168.6).\n10. Finish turn diameter Ø30.0 mm over length 124.7 mm (from Z=0.0 to Z=124.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03877", "images": ["images/Shaft_03877.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.1 mm and length at least 180.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 44.7 mm (from Z=0.0 to Z=44.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 130.5 mm (from Z=0.0 to Z=130.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03300", "images": ["images/Shaft_03300.png", "detail_png/Shaft_03300_length.png", "detail_png/Shaft_03300_diam.png", "detail_png/Shaft_03300_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø69.1 mm and length at least 249.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 125.0 mm (from Z=0.0 to Z=125.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.7 mm over length 84.7 mm (from Z=0.0 to Z=119.9).\n10. Finish turn diameter Ø47.4 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00670", "images": ["images/Shaft_00670.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.1 mm and length at least 108.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.3 mm (from Z=0.0 to Z=82.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01182", "images": ["images/Shaft_01182.png", "detail_png/Shaft_01182_length.png", "detail_png/Shaft_01182_diam.png", "detail_png/Shaft_01182_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 186.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.0 mm (from Z=0.0 to Z=146.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01812", "images": ["images/Shaft_01812.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.1 mm and length at least 173.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 104.2 mm (from Z=0.0 to Z=104.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.2 mm over length 40.1 mm (from Z=0.0 to Z=64.3).\n9. Finish turn diameter Ø49.6 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03291", "images": ["images/Shaft_03291.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 97.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 64.2 mm (from Z=0.0 to Z=64.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.2 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01702", "images": ["images/Shaft_01702.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø49.2 mm and length at least 271.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 89.0 mm (from Z=0.0 to Z=89.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.5 mm over length 19.8 mm (from Z=0.0 to Z=177.3).\n10. Finish turn diameter Ø31.0 mm over length 65.1 mm (from Z=0.0 to Z=157.5).\n11. Finish turn diameter Ø30.0 mm over length 92.4 mm (from Z=0.0 to Z=92.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03037", "images": ["images/Shaft_03037.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.0 mm and length at least 265.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.0 mm over length 35.7 mm (from Z=0.0 to Z=186.6).\n10. Finish turn diameter Ø41.9 mm over length 50.5 mm (from Z=0.0 to Z=150.9).\n11. Finish turn diameter Ø30.0 mm over length 100.4 mm (from Z=0.0 to Z=100.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01819", "images": ["images/Shaft_01819.png", "detail_png/Shaft_01819_length.png", "detail_png/Shaft_01819_diam.png", "detail_png/Shaft_01819_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.0 mm and length at least 254.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.8 mm over length 35.0 mm (from Z=0.0 to Z=203.8).\n10. Finish turn diameter Ø41.1 mm over length 41.1 mm (from Z=0.0 to Z=168.8).\n11. Finish turn diameter Ø30.0 mm over length 127.7 mm (from Z=0.0 to Z=127.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03636", "images": ["images/Shaft_03636.png", "detail_png/Shaft_03636_length.png", "detail_png/Shaft_03636_diam.png", "detail_png/Shaft_03636_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø71.0 mm and length at least 206.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.0 mm over length 44.2 mm (from Z=0.0 to Z=159.0).\n10. Finish turn diameter Ø51.3 mm over length 41.3 mm (from Z=0.0 to Z=114.8).\n11. Finish turn diameter Ø36.1 mm over length 30.2 mm (from Z=0.0 to Z=73.5).\n12. Finish turn diameter Ø30.0 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04148", "images": ["images/Shaft_04148.png", "detail_png/Shaft_04148_length.png", "detail_png/Shaft_04148_diam.png", "detail_png/Shaft_04148_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.2 mm and length at least 80.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.7 mm over length 12.5 mm (from Z=0.0 to Z=54.6).\n9. Finish turn diameter Ø49.8 mm over length 21.7 mm (from Z=0.0 to Z=42.1).\n10. Finish turn diameter Ø45.1 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00883", "images": ["images/Shaft_00883.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.3 mm and length at least 90.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.2 mm over length 8.7 mm (from Z=0.0 to Z=63.4).\n9. Finish turn diameter Ø58.3 mm over length 28.8 mm (from Z=0.0 to Z=54.7).\n10. Finish turn diameter Ø40.1 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00358", "images": ["images/Shaft_00358.png", "detail_png/Shaft_00358_length.png", "detail_png/Shaft_00358_diam.png", "detail_png/Shaft_00358_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 272.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 68.2 mm (from Z=0.0 to Z=68.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.2 mm over length 49.7 mm (from Z=0.0 to Z=199.5).\n10. Finish turn diameter Ø54.7 mm over length 98.5 mm (from Z=0.0 to Z=149.8).\n11. Finish turn diameter Ø51.1 mm over length 18.5 mm (from Z=0.0 to Z=51.3).\n12. Finish turn diameter Ø34.7 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04929", "images": ["images/Shaft_04929.png", "detail_png/Shaft_04929_length.png", "detail_png/Shaft_04929_diam.png", "detail_png/Shaft_04929_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 140.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.6 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03581", "images": ["images/Shaft_03581.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 87.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 75.4 mm (from Z=0.0 to Z=75.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.0 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01825", "images": ["images/Shaft_01825.png", "detail_png/Shaft_01825_length.png", "detail_png/Shaft_01825_diam.png", "detail_png/Shaft_01825_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 113.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø27.3 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03938", "images": ["images/Shaft_03938.png", "detail_png/Shaft_03938_length.png", "detail_png/Shaft_03938_diam.png", "detail_png/Shaft_03938_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.6 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 5.9 mm (from Z=0.0 to Z=5.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 157.7 mm (from Z=0.0 to Z=157.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01439", "images": ["images/Shaft_01439.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.0 mm and length at least 140.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 10.7 mm (from Z=0.0 to Z=10.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.0 mm over length 47.7 mm (from Z=0.0 to Z=124.6).\n9. Finish turn diameter Ø34.5 mm over length 20.6 mm (from Z=0.0 to Z=76.9).\n10. Finish turn diameter Ø30.0 mm over length 56.3 mm (from Z=0.0 to Z=56.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01412", "images": ["images/Shaft_01412.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.0 mm and length at least 253.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.0 mm over length 7.4 mm (from Z=0.0 to Z=7.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 241.5 mm (from Z=0.0 to Z=241.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01165", "images": ["images/Shaft_01165.png", "detail_png/Shaft_01165_length.png", "detail_png/Shaft_01165_diam.png", "detail_png/Shaft_01165_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.3 mm and length at least 176.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.9 mm (from Z=0.0 to Z=149.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00049", "images": ["images/Shaft_00049.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.1 mm and length at least 239.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.1 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 219.4 mm (from Z=0.0 to Z=219.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03990", "images": ["images/Shaft_03990.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.8 mm and length at least 265.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.2 mm over length 19.8 mm (from Z=0.0 to Z=182.5).\n10. Finish turn diameter Ø30.0 mm over length 162.7 mm (from Z=0.0 to Z=162.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04397", "images": ["images/Shaft_04397.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.8 mm and length at least 163.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.8 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.7 mm over length 46.9 mm (from Z=0.0 to Z=120.5).\n9. Finish turn diameter Ø61.9 mm over length 16.7 mm (from Z=0.0 to Z=73.6).\n10. Finish turn diameter Ø47.6 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04000", "images": ["images/Shaft_04000.png", "detail_png/Shaft_04000_length.png", "detail_png/Shaft_04000_diam.png", "detail_png/Shaft_04000_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.7 mm and length at least 184.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.8 mm over length 96.2 mm (from Z=0.0 to Z=137.2).\n9. Finish turn diameter Ø30.9 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01751", "images": ["images/Shaft_01751.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.1 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.2 mm over length 31.2 mm (from Z=0.0 to Z=126.7).\n9. Finish turn diameter Ø49.7 mm over length 37.0 mm (from Z=0.0 to Z=95.5).\n10. Finish turn diameter Ø38.6 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04483", "images": ["images/Shaft_04483.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.9 mm and length at least 235.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 110.9 mm (from Z=0.0 to Z=110.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 53.6 mm (from Z=0.0 to Z=119.9).\n10. Finish turn diameter Ø30.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02932", "images": ["images/Shaft_02932.png", "detail_png/Shaft_02932_length.png", "detail_png/Shaft_02932_diam.png", "detail_png/Shaft_02932_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.9 mm and length at least 108.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 10.6 mm (from Z=0.0 to Z=10.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.9 mm over length 36.0 mm (from Z=0.0 to Z=93.0).\n9. Finish turn diameter Ø30.0 mm over length 57.0 mm (from Z=0.0 to Z=57.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03991", "images": ["images/Shaft_03991.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.9 mm and length at least 163.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.6 mm over length 25.5 mm (from Z=0.0 to Z=124.5).\n10. Finish turn diameter Ø30.0 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04996", "images": ["images/Shaft_04996.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.6 mm and length at least 252.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.6 mm over length 68.7 mm (from Z=0.0 to Z=68.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.0 mm over length 71.4 mm (from Z=0.0 to Z=179.1).\n10. Finish turn diameter Ø47.5 mm over length 53.5 mm (from Z=0.0 to Z=107.7).\n11. Finish turn diameter Ø32.6 mm over length 24.7 mm (from Z=0.0 to Z=54.2).\n12. Finish turn diameter Ø30.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01478", "images": ["images/Shaft_01478.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.3 mm and length at least 277.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.3 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.3 mm over length 97.5 mm (from Z=0.0 to Z=248.8).\n10. Finish turn diameter Ø30.0 mm over length 151.3 mm (from Z=0.0 to Z=151.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03957", "images": ["images/Shaft_03957.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø78.0 mm and length at least 111.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø71.6 mm over length 33.3 mm (from Z=0.0 to Z=70.1).\n9. Finish turn diameter Ø62.0 mm over length 36.8 mm (from Z=0.0 to Z=36.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03720", "images": ["images/Shaft_03720.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.4 mm and length at least 261.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 94.4 mm (from Z=0.0 to Z=94.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 162.1 mm (from Z=0.0 to Z=162.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00229", "images": ["images/Shaft_00229.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.4 mm and length at least 110.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.4 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 100.9 mm (from Z=0.0 to Z=100.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03864", "images": ["images/Shaft_03864.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.5 mm and length at least 115.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.5 mm over length 29.8 mm (from Z=0.0 to Z=83.9).\n9. Finish turn diameter Ø37.2 mm over length 49.1 mm (from Z=0.0 to Z=54.1).\n10. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02095", "images": ["images/Shaft_02095.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.4 mm and length at least 260.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.8 mm over length 23.5 mm (from Z=0.0 to Z=227.3).\n10. Finish turn diameter Ø41.5 mm over length 110.4 mm (from Z=0.0 to Z=203.8).\n11. Finish turn diameter Ø30.0 mm over length 93.4 mm (from Z=0.0 to Z=93.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02478", "images": ["images/Shaft_02478.png", "detail_png/Shaft_02478_length.png", "detail_png/Shaft_02478_diam.png", "detail_png/Shaft_02478_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.4 mm and length at least 76.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.4 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.9 mm over length 27.2 mm (from Z=0.0 to Z=48.4).\n9. Finish turn diameter Ø30.2 mm over length 6.1 mm (from Z=0.0 to Z=21.2).\n10. Finish turn diameter Ø30.0 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02470", "images": ["images/Shaft_02470.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 220.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 132.4 mm (from Z=0.0 to Z=132.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01301", "images": ["images/Shaft_01301.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.7 mm and length at least 211.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.7 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 196.7 mm (from Z=0.0 to Z=196.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04626", "images": ["images/Shaft_04626.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.3 mm and length at least 144.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 32.1 mm (from Z=0.0 to Z=32.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 16.9 mm (from Z=0.0 to Z=107.7).\n9. Finish turn diameter Ø53.0 mm over length 25.4 mm (from Z=0.0 to Z=90.8).\n10. Finish turn diameter Ø49.1 mm over length 35.2 mm (from Z=0.0 to Z=65.4).\n11. Finish turn diameter Ø35.3 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04803", "images": ["images/Shaft_04803.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.9 mm and length at least 130.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.9 mm over length 18.9 mm (from Z=0.0 to Z=93.9).\n9. Finish turn diameter Ø47.1 mm over length 27.5 mm (from Z=0.0 to Z=75.0).\n10. Finish turn diameter Ø30.0 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01615", "images": ["images/Shaft_01615.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 188.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 108.6 mm (from Z=0.0 to Z=108.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.5 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02096", "images": ["images/Shaft_02096.png", "detail_png/Shaft_02096_length.png", "detail_png/Shaft_02096_diam.png", "detail_png/Shaft_02096_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.6 mm and length at least 263.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 67.3 mm (from Z=0.0 to Z=67.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.7 mm over length 42.9 mm (from Z=0.0 to Z=191.5).\n10. Finish turn diameter Ø30.0 mm over length 148.6 mm (from Z=0.0 to Z=148.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00357", "images": ["images/Shaft_00357.png", "detail_png/Shaft_00357_length.png", "detail_png/Shaft_00357_diam.png", "detail_png/Shaft_00357_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.2 mm and length at least 201.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.7 mm over length 93.7 mm (from Z=0.0 to Z=129.2).\n10. Finish turn diameter Ø31.1 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04968", "images": ["images/Shaft_04968.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.7 mm and length at least 205.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.7 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.0 mm over length 6.7 mm (from Z=0.0 to Z=147.2).\n10. Finish turn diameter Ø30.0 mm over length 140.5 mm (from Z=0.0 to Z=140.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02773", "images": ["images/Shaft_02773.png", "detail_png/Shaft_02773_length.png", "detail_png/Shaft_02773_diam.png", "detail_png/Shaft_02773_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.2 mm and length at least 302.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.2 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.1 mm over length 46.7 mm (from Z=0.0 to Z=255.0).\n10. Finish turn diameter Ø30.0 mm over length 208.3 mm (from Z=0.0 to Z=208.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01824", "images": ["images/Shaft_01824.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.9 mm and length at least 131.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.8 mm over length 34.1 mm (from Z=0.0 to Z=78.3).\n9. Finish turn diameter Ø56.7 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04650", "images": ["images/Shaft_04650.png", "detail_png/Shaft_04650_length.png", "detail_png/Shaft_04650_diam.png", "detail_png/Shaft_04650_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.5 mm and length at least 143.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.5 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.2 mm (from Z=0.0 to Z=119.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04645", "images": ["images/Shaft_04645.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.2 mm and length at least 144.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.8 mm over length 19.9 mm (from Z=0.0 to Z=88.5).\n9. Finish turn diameter Ø62.0 mm over length 68.6 mm (from Z=0.0 to Z=68.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00342", "images": ["images/Shaft_00342.png", "detail_png/Shaft_00342_length.png", "detail_png/Shaft_00342_diam.png", "detail_png/Shaft_00342_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.3 mm and length at least 223.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.3 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.6 mm over length 53.3 mm (from Z=0.0 to Z=195.3).\n10. Finish turn diameter Ø44.3 mm over length 114.9 mm (from Z=0.0 to Z=142.0).\n11. Finish turn diameter Ø39.6 mm over length 27.1 mm (from Z=0.0 to Z=27.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04091", "images": ["images/Shaft_04091.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.5 mm and length at least 99.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 34.4 mm (from Z=0.0 to Z=70.4).\n9. Finish turn diameter Ø48.2 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00801", "images": ["images/Shaft_00801.png", "detail_png/Shaft_00801_length.png", "detail_png/Shaft_00801_diam.png", "detail_png/Shaft_00801_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.3 mm and length at least 173.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.3 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.7 mm over length 24.3 mm (from Z=0.0 to Z=101.8).\n9. Finish turn diameter Ø30.0 mm over length 77.5 mm (from Z=0.0 to Z=77.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04727", "images": ["images/Shaft_04727.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.7 mm and length at least 103.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.7 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.0 mm over length 29.5 mm (from Z=0.0 to Z=47.8).\n9. Finish turn diameter Ø30.0 mm over length 18.3 mm (from Z=0.0 to Z=18.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04821", "images": ["images/Shaft_04821.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.9 mm and length at least 165.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.9 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 26.7 mm (from Z=0.0 to Z=123.8).\n10. Finish turn diameter Ø30.0 mm over length 97.1 mm (from Z=0.0 to Z=97.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03832", "images": ["images/Shaft_03832.png", "detail_png/Shaft_03832_length.png", "detail_png/Shaft_03832_diam.png", "detail_png/Shaft_03832_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø69.2 mm and length at least 240.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.2 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 10.3 mm (from Z=0.0 to Z=205.5).\n10. Finish turn diameter Ø48.9 mm over length 20.8 mm (from Z=0.0 to Z=195.2).\n11. Finish turn diameter Ø33.3 mm over length 105.6 mm (from Z=0.0 to Z=174.4).\n12. Finish turn diameter Ø30.0 mm over length 68.8 mm (from Z=0.0 to Z=68.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04106", "images": ["images/Shaft_04106.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.8 mm and length at least 285.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.8 mm over length 57.5 mm (from Z=0.0 to Z=57.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 111.5 mm (from Z=0.0 to Z=223.2).\n10. Finish turn diameter Ø41.7 mm over length 111.7 mm (from Z=0.0 to Z=111.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04146", "images": ["images/Shaft_04146.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.2 mm and length at least 263.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.1 mm over length 49.2 mm (from Z=0.0 to Z=199.5).\n10. Finish turn diameter Ø39.8 mm over length 30.8 mm (from Z=0.0 to Z=150.3).\n11. Finish turn diameter Ø35.5 mm over length 29.9 mm (from Z=0.0 to Z=119.5).\n12. Finish turn diameter Ø30.0 mm over length 89.6 mm (from Z=0.0 to Z=89.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02156", "images": ["images/Shaft_02156.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.9 mm and length at least 189.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.8 mm over length 17.0 mm (from Z=0.0 to Z=137.8).\n10. Finish turn diameter Ø44.3 mm over length 21.9 mm (from Z=0.0 to Z=120.8).\n11. Finish turn diameter Ø30.0 mm over length 98.9 mm (from Z=0.0 to Z=98.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02389", "images": ["images/Shaft_02389.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.0 mm and length at least 146.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.7 mm over length 44.4 mm (from Z=0.0 to Z=103.3).\n9. Finish turn diameter Ø47.0 mm over length 58.9 mm (from Z=0.0 to Z=58.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04740", "images": ["images/Shaft_04740.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.9 mm and length at least 256.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.9 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.6 mm over length 22.8 mm (from Z=0.0 to Z=188.7).\n10. Finish turn diameter Ø46.5 mm over length 57.3 mm (from Z=0.0 to Z=165.9).\n11. Finish turn diameter Ø43.1 mm over length 55.5 mm (from Z=0.0 to Z=108.6).\n12. Finish turn diameter Ø31.8 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02626", "images": ["images/Shaft_02626.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.2 mm and length at least 110.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.2 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 90.8 mm (from Z=0.0 to Z=90.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04606", "images": ["images/Shaft_04606.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.5 mm and length at least 239.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 59.6 mm (from Z=0.0 to Z=59.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.3 mm over length 40.9 mm (from Z=0.0 to Z=175.3).\n10. Finish turn diameter Ø36.6 mm over length 54.8 mm (from Z=0.0 to Z=134.4).\n11. Finish turn diameter Ø30.0 mm over length 79.6 mm (from Z=0.0 to Z=79.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00225", "images": ["images/Shaft_00225.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.9 mm and length at least 108.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.6 mm over length 35.7 mm (from Z=0.0 to Z=95.1).\n9. Finish turn diameter Ø30.0 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04058", "images": ["images/Shaft_04058.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.0 mm and length at least 213.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 37.0 mm (from Z=0.0 to Z=161.4).\n10. Finish turn diameter Ø30.0 mm over length 124.4 mm (from Z=0.0 to Z=124.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00378", "images": ["images/Shaft_00378.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.5 mm and length at least 241.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.8 mm over length 59.1 mm (from Z=0.0 to Z=217.6).\n10. Finish turn diameter Ø45.5 mm over length 24.5 mm (from Z=0.0 to Z=158.5).\n11. Finish turn diameter Ø30.0 mm over length 134.0 mm (from Z=0.0 to Z=134.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01463", "images": ["images/Shaft_01463.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.4 mm and length at least 318.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.8 mm over length 56.8 mm (from Z=0.0 to Z=247.1).\n10. Finish turn diameter Ø52.5 mm over length 190.3 mm (from Z=0.0 to Z=190.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01826", "images": ["images/Shaft_01826.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø82.0 mm and length at least 206.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø80.0 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø80.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.2 mm over length 73.8 mm (from Z=0.0 to Z=146.5).\n10. Finish turn diameter Ø42.4 mm over length 72.7 mm (from Z=0.0 to Z=72.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04254", "images": ["images/Shaft_04254.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.5 mm and length at least 313.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.5 mm over length 79.4 mm (from Z=0.0 to Z=287.7).\n10. Finish turn diameter Ø30.0 mm over length 208.3 mm (from Z=0.0 to Z=208.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03444", "images": ["images/Shaft_03444.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.8 mm and length at least 233.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.6 mm over length 47.5 mm (from Z=0.0 to Z=178.3).\n10. Finish turn diameter Ø51.7 mm over length 42.6 mm (from Z=0.0 to Z=130.8).\n11. Finish turn diameter Ø42.3 mm over length 47.4 mm (from Z=0.0 to Z=88.2).\n12. Finish turn diameter Ø34.6 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02529", "images": ["images/Shaft_02529.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø39.9 mm and length at least 252.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 79.6 mm (from Z=0.0 to Z=79.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.1 mm (from Z=0.0 to Z=168.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01645", "images": ["images/Shaft_01645.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.7 mm and length at least 201.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.4 mm over length 31.4 mm (from Z=0.0 to Z=120.6).\n10. Finish turn diameter Ø32.6 mm over length 30.0 mm (from Z=0.0 to Z=89.2).\n11. Finish turn diameter Ø30.0 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04708", "images": ["images/Shaft_04708.png", "detail_png/Shaft_04708_length.png", "detail_png/Shaft_04708_diam.png", "detail_png/Shaft_04708_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.6 mm and length at least 72.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.5 mm over length 19.1 mm (from Z=0.0 to Z=49.2).\n9. Finish turn diameter Ø32.8 mm over length 12.0 mm (from Z=0.0 to Z=30.1).\n10. Finish turn diameter Ø30.0 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01261", "images": ["images/Shaft_01261.png", "detail_png/Shaft_01261_length.png", "detail_png/Shaft_01261_diam.png", "detail_png/Shaft_01261_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.7 mm and length at least 284.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 143.2 mm (from Z=0.0 to Z=143.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.0 mm over length 96.9 mm (from Z=0.0 to Z=136.2).\n10. Finish turn diameter Ø55.1 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04209", "images": ["images/Shaft_04209.png", "detail_png/Shaft_04209_length.png", "detail_png/Shaft_04209_diam.png", "detail_png/Shaft_04209_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.0 mm and length at least 283.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.6 mm over length 110.2 mm (from Z=0.0 to Z=264.3).\n10. Finish turn diameter Ø30.0 mm over length 154.1 mm (from Z=0.0 to Z=154.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02256", "images": ["images/Shaft_02256.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.0 mm and length at least 274.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 49.0 mm (from Z=0.0 to Z=191.4).\n10. Finish turn diameter Ø40.2 mm over length 10.4 mm (from Z=0.0 to Z=142.4).\n11. Finish turn diameter Ø32.0 mm over length 41.0 mm (from Z=0.0 to Z=132.0).\n12. Finish turn diameter Ø30.0 mm over length 91.0 mm (from Z=0.0 to Z=91.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02777", "images": ["images/Shaft_02777.png", "detail_png/Shaft_02777_length.png", "detail_png/Shaft_02777_diam.png", "detail_png/Shaft_02777_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 202.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.4 mm over length 93.0 mm (from Z=0.0 to Z=93.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00571", "images": ["images/Shaft_00571.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø72.3 mm and length at least 216.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.8 mm over length 47.5 mm (from Z=0.0 to Z=192.7).\n10. Finish turn diameter Ø50.6 mm over length 56.8 mm (from Z=0.0 to Z=145.2).\n11. Finish turn diameter Ø34.7 mm over length 14.0 mm (from Z=0.0 to Z=88.4).\n12. Finish turn diameter Ø30.0 mm over length 74.4 mm (from Z=0.0 to Z=74.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00164", "images": ["images/Shaft_00164.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.9 mm and length at least 76.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.9 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.2 mm over length 16.2 mm (from Z=0.0 to Z=57.1).\n9. Finish turn diameter Ø54.3 mm over length 19.3 mm (from Z=0.0 to Z=40.9).\n10. Finish turn diameter Ø48.2 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03687", "images": ["images/Shaft_03687.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.3 mm and length at least 293.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.3 mm over length 144.8 mm (from Z=0.0 to Z=144.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.6 mm over length 101.4 mm (from Z=0.0 to Z=144.1).\n10. Finish turn diameter Ø56.8 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01961", "images": ["images/Shaft_01961.png", "detail_png/Shaft_01961_length.png", "detail_png/Shaft_01961_diam.png", "detail_png/Shaft_01961_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.6 mm and length at least 91.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.6 mm over length 27.3 mm (from Z=0.0 to Z=27.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.6 mm (from Z=0.0 to Z=59.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02996", "images": ["images/Shaft_02996.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 319.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 245.6 mm (from Z=0.0 to Z=245.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00460", "images": ["images/Shaft_00460.png", "detail_png/Shaft_00460_length.png", "detail_png/Shaft_00460_diam.png", "detail_png/Shaft_00460_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.4 mm and length at least 319.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 53.5 mm (from Z=0.0 to Z=53.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.2 mm over length 12.1 mm (from Z=0.0 to Z=260.6).\n10. Finish turn diameter Ø38.3 mm over length 99.1 mm (from Z=0.0 to Z=248.5).\n11. Finish turn diameter Ø30.0 mm over length 149.4 mm (from Z=0.0 to Z=149.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02822", "images": ["images/Shaft_02822.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.5 mm and length at least 94.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.5 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.4 mm over length 29.1 mm (from Z=0.0 to Z=69.4).\n9. Finish turn diameter Ø56.5 mm over length 19.8 mm (from Z=0.0 to Z=40.3).\n10. Finish turn diameter Ø45.3 mm over length 20.5 mm (from Z=0.0 to Z=20.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01387", "images": ["images/Shaft_01387.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.0 mm and length at least 222.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 64.2 mm (from Z=0.0 to Z=64.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.4 mm over length 81.5 mm (from Z=0.0 to Z=153.3).\n10. Finish turn diameter Ø59.7 mm over length 34.1 mm (from Z=0.0 to Z=71.8).\n11. Finish turn diameter Ø46.2 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01810", "images": ["images/Shaft_01810.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.7 mm and length at least 255.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 30.3 mm (from Z=0.0 to Z=30.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 75.8 mm (from Z=0.0 to Z=219.7).\n10. Finish turn diameter Ø30.0 mm over length 143.9 mm (from Z=0.0 to Z=143.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04524", "images": ["images/Shaft_04524.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.2 mm and length at least 140.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.9 mm over length 58.0 mm (from Z=0.0 to Z=71.4).\n9. Finish turn diameter Ø49.8 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04485", "images": ["images/Shaft_04485.png", "detail_png/Shaft_04485_length.png", "detail_png/Shaft_04485_diam.png", "detail_png/Shaft_04485_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 307.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 169.9 mm (from Z=0.0 to Z=169.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.1 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02984", "images": ["images/Shaft_02984.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.2 mm and length at least 130.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.2 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.8 mm over length 9.6 mm (from Z=0.0 to Z=53.9).\n9. Finish turn diameter Ø30.0 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02315", "images": ["images/Shaft_02315.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.5 mm and length at least 230.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 72.0 mm (from Z=0.0 to Z=72.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.0 mm over length 40.7 mm (from Z=0.0 to Z=153.7).\n10. Finish turn diameter Ø47.3 mm over length 66.2 mm (from Z=0.0 to Z=113.0).\n11. Finish turn diameter Ø30.0 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03275", "images": ["images/Shaft_03275.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.6 mm and length at least 254.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.6 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.9 mm over length 19.4 mm (from Z=0.0 to Z=215.6).\n10. Finish turn diameter Ø43.1 mm over length 49.3 mm (from Z=0.0 to Z=196.2).\n11. Finish turn diameter Ø30.8 mm over length 38.2 mm (from Z=0.0 to Z=146.9).\n12. Finish turn diameter Ø30.0 mm over length 108.7 mm (from Z=0.0 to Z=108.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04245", "images": ["images/Shaft_04245.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.7 mm and length at least 314.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.8 mm over length 57.1 mm (from Z=0.0 to Z=234.6).\n10. Finish turn diameter Ø38.8 mm over length 55.7 mm (from Z=0.0 to Z=177.5).\n11. Finish turn diameter Ø30.0 mm over length 121.8 mm (from Z=0.0 to Z=121.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04423", "images": ["images/Shaft_04423.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.7 mm and length at least 67.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 16.0 mm (from Z=0.0 to Z=16.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.6 mm over length 13.1 mm (from Z=0.0 to Z=46.5).\n9. Finish turn diameter Ø30.0 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04598", "images": ["images/Shaft_04598.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.0 mm and length at least 196.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.5 mm over length 47.2 mm (from Z=0.0 to Z=172.3).\n10. Finish turn diameter Ø50.6 mm over length 57.4 mm (from Z=0.0 to Z=125.1).\n11. Finish turn diameter Ø33.5 mm over length 67.7 mm (from Z=0.0 to Z=67.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03089", "images": ["images/Shaft_03089.png", "detail_png/Shaft_03089_length.png", "detail_png/Shaft_03089_diam.png", "detail_png/Shaft_03089_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.7 mm and length at least 299.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.7 mm over length 96.8 mm (from Z=0.0 to Z=96.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 198.0 mm (from Z=0.0 to Z=198.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03866", "images": ["images/Shaft_03866.png", "detail_png/Shaft_03866_length.png", "detail_png/Shaft_03866_diam.png", "detail_png/Shaft_03866_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.6 mm and length at least 167.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 82.8 mm (from Z=0.0 to Z=82.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.5 mm over length 15.7 mm (from Z=0.0 to Z=80.0).\n9. Finish turn diameter Ø51.9 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04240", "images": ["images/Shaft_04240.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.8 mm and length at least 154.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.5 mm over length 40.2 mm (from Z=0.0 to Z=107.7).\n9. Finish turn diameter Ø30.0 mm over length 67.5 mm (from Z=0.0 to Z=67.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03669", "images": ["images/Shaft_03669.png", "detail_png/Shaft_03669_length.png", "detail_png/Shaft_03669_diam.png", "detail_png/Shaft_03669_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 100.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 55.0 mm (from Z=0.0 to Z=55.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.1 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04083", "images": ["images/Shaft_04083.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.1 mm and length at least 219.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.1 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.6 mm over length 81.2 mm (from Z=0.0 to Z=145.3).\n10. Finish turn diameter Ø30.0 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01210", "images": ["images/Shaft_01210.png", "detail_png/Shaft_01210_length.png", "detail_png/Shaft_01210_diam.png", "detail_png/Shaft_01210_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.8 mm and length at least 311.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.7 mm over length 36.1 mm (from Z=0.0 to Z=269.0).\n10. Finish turn diameter Ø30.0 mm over length 232.9 mm (from Z=0.0 to Z=232.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04128", "images": ["images/Shaft_04128.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.8 mm and length at least 199.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.8 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 56.1 mm (from Z=0.0 to Z=165.6).\n10. Finish turn diameter Ø30.1 mm over length 63.1 mm (from Z=0.0 to Z=109.5).\n11. Finish turn diameter Ø30.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02651", "images": ["images/Shaft_02651.png", "detail_png/Shaft_02651_length.png", "detail_png/Shaft_02651_diam.png", "detail_png/Shaft_02651_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.0 mm and length at least 77.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.8 mm over length 20.5 mm (from Z=0.0 to Z=60.0).\n9. Finish turn diameter Ø57.9 mm over length 16.4 mm (from Z=0.0 to Z=39.5).\n10. Finish turn diameter Ø54.4 mm over length 5.8 mm (from Z=0.0 to Z=23.1).\n11. Finish turn diameter Ø47.9 mm over length 12.3 mm (from Z=0.0 to Z=17.3).\n12. Finish turn diameter Ø40.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01356", "images": ["images/Shaft_01356.png", "detail_png/Shaft_01356_length.png", "detail_png/Shaft_01356_diam.png", "detail_png/Shaft_01356_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.8 mm and length at least 238.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 60.6 mm (from Z=0.0 to Z=60.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.2 mm over length 56.1 mm (from Z=0.0 to Z=173.2).\n10. Finish turn diameter Ø30.0 mm over length 117.1 mm (from Z=0.0 to Z=117.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02078", "images": ["images/Shaft_02078.png", "detail_png/Shaft_02078_length.png", "detail_png/Shaft_02078_diam.png", "detail_png/Shaft_02078_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø82.0 mm and length at least 318.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø80.0 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø80.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø69.2 mm over length 29.8 mm (from Z=0.0 to Z=253.4).\n10. Finish turn diameter Ø59.8 mm over length 120.7 mm (from Z=0.0 to Z=223.6).\n11. Finish turn diameter Ø46.3 mm over length 72.0 mm (from Z=0.0 to Z=102.9).\n12. Finish turn diameter Ø42.6 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02237", "images": ["images/Shaft_02237.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.0 mm and length at least 297.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.0 mm over length 39.4 mm (from Z=0.0 to Z=39.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.4 mm over length 25.6 mm (from Z=0.0 to Z=253.0).\n10. Finish turn diameter Ø30.0 mm over length 227.4 mm (from Z=0.0 to Z=227.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04746", "images": ["images/Shaft_04746.png", "detail_png/Shaft_04746_length.png", "detail_png/Shaft_04746_diam.png", "detail_png/Shaft_04746_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.6 mm and length at least 205.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 71.8 mm (from Z=0.0 to Z=71.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.5 mm over length 109.4 mm (from Z=0.0 to Z=129.0).\n10. Finish turn diameter Ø54.0 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00017", "images": ["images/Shaft_00017.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø33.5 mm and length at least 162.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 126.5 mm (from Z=0.0 to Z=126.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04624", "images": ["images/Shaft_04624.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.2 mm and length at least 157.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.2 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 28.4 mm (from Z=0.0 to Z=123.6).\n9. Finish turn diameter Ø44.3 mm over length 16.8 mm (from Z=0.0 to Z=95.2).\n10. Finish turn diameter Ø37.9 mm over length 27.1 mm (from Z=0.0 to Z=78.4).\n11. Finish turn diameter Ø30.0 mm over length 51.3 mm (from Z=0.0 to Z=51.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01311", "images": ["images/Shaft_01311.png", "detail_png/Shaft_01311_length.png", "detail_png/Shaft_01311_diam.png", "detail_png/Shaft_01311_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.9 mm and length at least 119.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.8 mm over length 26.2 mm (from Z=0.0 to Z=100.9).\n9. Finish turn diameter Ø44.1 mm over length 22.8 mm (from Z=0.0 to Z=74.7).\n10. Finish turn diameter Ø36.5 mm over length 20.5 mm (from Z=0.0 to Z=51.9).\n11. Finish turn diameter Ø30.0 mm over length 31.4 mm (from Z=0.0 to Z=31.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03800", "images": ["images/Shaft_03800.png", "detail_png/Shaft_03800_length.png", "detail_png/Shaft_03800_diam.png", "detail_png/Shaft_03800_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.2 mm and length at least 123.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.2 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.4 mm (from Z=0.0 to Z=105.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01876", "images": ["images/Shaft_01876.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.6 mm and length at least 153.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.6 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 44.6 mm (from Z=0.0 to Z=120.9).\n9. Finish turn diameter Ø43.5 mm over length 42.0 mm (from Z=0.0 to Z=76.3).\n10. Finish turn diameter Ø37.1 mm over length 27.7 mm (from Z=0.0 to Z=34.3).\n11. Finish turn diameter Ø30.0 mm over length 6.6 mm (from Z=0.0 to Z=6.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03882", "images": ["images/Shaft_03882.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.2 mm and length at least 312.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 103.0 mm (from Z=0.0 to Z=103.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 98.4 mm (from Z=0.0 to Z=204.5).\n10. Finish turn diameter Ø54.7 mm over length 63.0 mm (from Z=0.0 to Z=106.1).\n11. Finish turn diameter Ø43.5 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00595", "images": ["images/Shaft_00595.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.5 mm and length at least 222.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.7 mm over length 22.1 mm (from Z=0.0 to Z=161.2).\n10. Finish turn diameter Ø30.0 mm over length 139.1 mm (from Z=0.0 to Z=139.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04409", "images": ["images/Shaft_04409.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.8 mm and length at least 152.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 22.9 mm (from Z=0.0 to Z=96.3).\n9. Finish turn diameter Ø36.3 mm over length 49.8 mm (from Z=0.0 to Z=73.4).\n10. Finish turn diameter Ø30.0 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02045", "images": ["images/Shaft_02045.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.7 mm and length at least 252.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.7 mm over length 13.0 mm (from Z=0.0 to Z=13.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.1 mm over length 91.9 mm (from Z=0.0 to Z=234.6).\n10. Finish turn diameter Ø52.1 mm over length 69.8 mm (from Z=0.0 to Z=142.7).\n11. Finish turn diameter Ø36.6 mm over length 72.9 mm (from Z=0.0 to Z=72.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04221", "images": ["images/Shaft_04221.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 176.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 98.2 mm (from Z=0.0 to Z=98.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.8 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01657", "images": ["images/Shaft_01657.png", "detail_png/Shaft_01657_length.png", "detail_png/Shaft_01657_diam.png", "detail_png/Shaft_01657_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø60.7 mm and length at least 173.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.7 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.6 mm over length 33.8 mm (from Z=0.0 to Z=121.2).\n9. Finish turn diameter Ø30.0 mm over length 87.4 mm (from Z=0.0 to Z=87.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00102", "images": ["images/Shaft_00102.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.0 mm and length at least 322.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.9 mm over length 26.1 mm (from Z=0.0 to Z=281.0).\n10. Finish turn diameter Ø44.6 mm over length 25.9 mm (from Z=0.0 to Z=254.9).\n11. Finish turn diameter Ø32.8 mm over length 107.9 mm (from Z=0.0 to Z=229.0).\n12. Finish turn diameter Ø30.0 mm over length 121.1 mm (from Z=0.0 to Z=121.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03770", "images": ["images/Shaft_03770.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.3 mm and length at least 128.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 26.8 mm (from Z=0.0 to Z=85.4).\n9. Finish turn diameter Ø45.9 mm over length 27.5 mm (from Z=0.0 to Z=58.6).\n10. Finish turn diameter Ø30.0 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00497", "images": ["images/Shaft_00497.png", "detail_png/Shaft_00497_length.png", "detail_png/Shaft_00497_diam.png", "detail_png/Shaft_00497_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.5 mm and length at least 299.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.0 mm over length 42.8 mm (from Z=0.0 to Z=220.7).\n10. Finish turn diameter Ø31.6 mm over length 75.0 mm (from Z=0.0 to Z=177.9).\n11. Finish turn diameter Ø30.0 mm over length 102.9 mm (from Z=0.0 to Z=102.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01235", "images": ["images/Shaft_01235.png", "detail_png/Shaft_01235_length.png", "detail_png/Shaft_01235_diam.png", "detail_png/Shaft_01235_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.2 mm and length at least 155.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.2 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.6 mm over length 43.1 mm (from Z=0.0 to Z=129.5).\n9. Finish turn diameter Ø33.8 mm over length 42.3 mm (from Z=0.0 to Z=86.4).\n10. Finish turn diameter Ø30.0 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02185", "images": ["images/Shaft_02185.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 112.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 96.0 mm (from Z=0.0 to Z=96.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.7 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00665", "images": ["images/Shaft_00665.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.4 mm and length at least 107.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.4 mm over length 50.7 mm (from Z=0.0 to Z=50.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.9 mm over length 5.0 mm (from Z=0.0 to Z=52.2).\n9. Finish turn diameter Ø41.6 mm over length 47.2 mm (from Z=0.0 to Z=47.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02211", "images": ["images/Shaft_02211.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø54.0 mm and length at least 309.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.1 mm over length 50.5 mm (from Z=0.0 to Z=215.5).\n10. Finish turn diameter Ø42.0 mm over length 87.8 mm (from Z=0.0 to Z=165.0).\n11. Finish turn diameter Ø32.1 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01836", "images": ["images/Shaft_01836.png", "detail_png/Shaft_01836_length.png", "detail_png/Shaft_01836_diam.png", "detail_png/Shaft_01836_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.5 mm and length at least 205.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.7 mm over length 61.5 mm (from Z=0.0 to Z=187.6).\n10. Finish turn diameter Ø30.0 mm over length 126.1 mm (from Z=0.0 to Z=126.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01527", "images": ["images/Shaft_01527.png", "detail_png/Shaft_01527_length.png", "detail_png/Shaft_01527_diam.png", "detail_png/Shaft_01527_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.9 mm and length at least 91.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00605", "images": ["images/Shaft_00605.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.4 mm and length at least 105.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 7.2 mm (from Z=0.0 to Z=80.8).\n9. Finish turn diameter Ø30.0 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01408", "images": ["images/Shaft_01408.png", "detail_png/Shaft_01408_length.png", "detail_png/Shaft_01408_diam.png", "detail_png/Shaft_01408_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.6 mm and length at least 91.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.1 mm over length 12.5 mm (from Z=0.0 to Z=57.7).\n9. Finish turn diameter Ø47.8 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01298", "images": ["images/Shaft_01298.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.9 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.6 mm over length 10.0 mm (from Z=0.0 to Z=88.8).\n9. Finish turn diameter Ø30.0 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02726", "images": ["images/Shaft_02726.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.5 mm and length at least 261.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 39.7 mm (from Z=0.0 to Z=39.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 15.5 mm (from Z=0.0 to Z=216.3).\n10. Finish turn diameter Ø30.0 mm over length 200.8 mm (from Z=0.0 to Z=200.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00142", "images": ["images/Shaft_00142.png", "detail_png/Shaft_00142_length.png", "detail_png/Shaft_00142_diam.png", "detail_png/Shaft_00142_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.4 mm and length at least 215.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 153.7 mm (from Z=0.0 to Z=153.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04932", "images": ["images/Shaft_04932.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.7 mm and length at least 177.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.7 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.0 mm over length 15.5 mm (from Z=0.0 to Z=140.4).\n9. Finish turn diameter Ø42.4 mm over length 38.0 mm (from Z=0.0 to Z=124.9).\n10. Finish turn diameter Ø32.9 mm over length 17.0 mm (from Z=0.0 to Z=86.9).\n11. Finish turn diameter Ø30.0 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02303", "images": ["images/Shaft_02303.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.4 mm and length at least 71.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 11.6 mm (from Z=0.0 to Z=11.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.1 mm over length 12.6 mm (from Z=0.0 to Z=54.5).\n9. Finish turn diameter Ø57.5 mm over length 17.9 mm (from Z=0.0 to Z=41.9).\n10. Finish turn diameter Ø52.7 mm over length 6.8 mm (from Z=0.0 to Z=24.0).\n11. Finish turn diameter Ø37.4 mm over length 12.2 mm (from Z=0.0 to Z=17.2).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00840", "images": ["images/Shaft_00840.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.5 mm and length at least 258.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 29.0 mm (from Z=0.0 to Z=223.6).\n10. Finish turn diameter Ø45.9 mm over length 70.4 mm (from Z=0.0 to Z=194.6).\n11. Finish turn diameter Ø37.9 mm over length 32.3 mm (from Z=0.0 to Z=124.2).\n12. Finish turn diameter Ø30.0 mm over length 91.9 mm (from Z=0.0 to Z=91.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00755", "images": ["images/Shaft_00755.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 194.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 125.8 mm (from Z=0.0 to Z=125.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 63.8 mm (from Z=0.0 to Z=63.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01514", "images": ["images/Shaft_01514.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.2 mm and length at least 249.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.4 mm over length 70.0 mm (from Z=0.0 to Z=198.8).\n10. Finish turn diameter Ø63.2 mm over length 39.7 mm (from Z=0.0 to Z=128.8).\n11. Finish turn diameter Ø60.1 mm over length 9.0 mm (from Z=0.0 to Z=89.1).\n12. Finish turn diameter Ø46.3 mm over length 80.1 mm (from Z=0.0 to Z=80.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01066", "images": ["images/Shaft_01066.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.0 mm and length at least 218.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 6.7 mm (from Z=0.0 to Z=6.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 37.2 mm (from Z=0.0 to Z=206.8).\n10. Finish turn diameter Ø30.0 mm over length 169.6 mm (from Z=0.0 to Z=169.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01805", "images": ["images/Shaft_01805.png", "detail_png/Shaft_01805_length.png", "detail_png/Shaft_01805_diam.png", "detail_png/Shaft_01805_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.7 mm and length at least 122.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.3 mm over length 23.4 mm (from Z=0.0 to Z=70.8).\n9. Finish turn diameter Ø38.0 mm over length 34.2 mm (from Z=0.0 to Z=47.4).\n10. Finish turn diameter Ø30.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00518", "images": ["images/Shaft_00518.png", "detail_png/Shaft_00518_length.png", "detail_png/Shaft_00518_diam.png", "detail_png/Shaft_00518_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 242.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 141.6 mm (from Z=0.0 to Z=141.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.8 mm over length 95.8 mm (from Z=0.0 to Z=95.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02353", "images": ["images/Shaft_02353.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.1 mm and length at least 108.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.1 mm over length 32.8 mm (from Z=0.0 to Z=32.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 12.3 mm (from Z=0.0 to Z=71.1).\n9. Finish turn diameter Ø30.0 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01296", "images": ["images/Shaft_01296.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.4 mm and length at least 277.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 34.3 mm (from Z=0.0 to Z=34.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.5 mm over length 63.3 mm (from Z=0.0 to Z=238.2).\n10. Finish turn diameter Ø55.8 mm over length 54.8 mm (from Z=0.0 to Z=174.9).\n11. Finish turn diameter Ø48.3 mm over length 62.9 mm (from Z=0.0 to Z=120.1).\n12. Finish turn diameter Ø42.9 mm over length 6.8 mm (from Z=0.0 to Z=57.2).\n13. Finish turn diameter Ø35.8 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00168", "images": ["images/Shaft_00168.png", "detail_png/Shaft_00168_length.png", "detail_png/Shaft_00168_diam.png", "detail_png/Shaft_00168_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.7 mm and length at least 260.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.7 mm over length 124.5 mm (from Z=0.0 to Z=237.5).\n10. Finish turn diameter Ø36.4 mm over length 113.0 mm (from Z=0.0 to Z=113.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00478", "images": ["images/Shaft_00478.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.7 mm and length at least 210.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.7 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.8 mm over length 25.3 mm (from Z=0.0 to Z=165.5).\n10. Finish turn diameter Ø32.4 mm over length 38.5 mm (from Z=0.0 to Z=140.2).\n11. Finish turn diameter Ø30.0 mm over length 101.7 mm (from Z=0.0 to Z=101.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00974", "images": ["images/Shaft_00974.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.3 mm and length at least 84.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.3 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.2 mm over length 20.9 mm (from Z=0.0 to Z=72.5).\n9. Finish turn diameter Ø34.9 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00660", "images": ["images/Shaft_00660.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.9 mm and length at least 103.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.2 mm over length 9.3 mm (from Z=0.0 to Z=79.9).\n9. Finish turn diameter Ø38.9 mm over length 29.6 mm (from Z=0.0 to Z=70.6).\n10. Finish turn diameter Ø30.0 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00628", "images": ["images/Shaft_00628.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø71.0 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 25.7 mm (from Z=0.0 to Z=124.1).\n9. Finish turn diameter Ø47.8 mm over length 19.8 mm (from Z=0.0 to Z=98.4).\n10. Finish turn diameter Ø44.2 mm over length 34.7 mm (from Z=0.0 to Z=78.6).\n11. Finish turn diameter Ø33.8 mm over length 17.7 mm (from Z=0.0 to Z=43.9).\n12. Finish turn diameter Ø30.0 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03254", "images": ["images/Shaft_03254.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.4 mm and length at least 181.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.7 mm over length 20.3 mm (from Z=0.0 to Z=153.4).\n9. Finish turn diameter Ø31.2 mm over length 46.9 mm (from Z=0.0 to Z=133.1).\n10. Finish turn diameter Ø30.0 mm over length 86.2 mm (from Z=0.0 to Z=86.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02729", "images": ["images/Shaft_02729.png", "detail_png/Shaft_02729_length.png", "detail_png/Shaft_02729_diam.png", "detail_png/Shaft_02729_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.6 mm and length at least 162.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.6 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 8.8 mm (from Z=0.0 to Z=129.1).\n9. Finish turn diameter Ø41.1 mm over length 41.5 mm (from Z=0.0 to Z=120.3).\n10. Finish turn diameter Ø30.0 mm over length 78.8 mm (from Z=0.0 to Z=78.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03705", "images": ["images/Shaft_03705.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.1 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.1 mm over length 42.1 mm (from Z=0.0 to Z=86.2).\n9. Finish turn diameter Ø30.0 mm over length 44.1 mm (from Z=0.0 to Z=44.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02837", "images": ["images/Shaft_02837.png", "detail_png/Shaft_02837_length.png", "detail_png/Shaft_02837_diam.png", "detail_png/Shaft_02837_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.3 mm and length at least 139.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.3 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 48.9 mm (from Z=0.0 to Z=68.8).\n9. Finish turn diameter Ø44.7 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02900", "images": ["images/Shaft_02900.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.6 mm and length at least 67.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.3 mm over length 5.0 mm (from Z=0.0 to Z=57.3).\n9. Finish turn diameter Ø34.1 mm over length 17.8 mm (from Z=0.0 to Z=52.3).\n10. Finish turn diameter Ø30.0 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03437", "images": ["images/Shaft_03437.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.0 mm and length at least 242.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.0 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.1 mm over length 102.3 mm (from Z=0.0 to Z=157.7).\n10. Finish turn diameter Ø30.2 mm over length 55.4 mm (from Z=0.0 to Z=55.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00718", "images": ["images/Shaft_00718.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 324.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 230.0 mm (from Z=0.0 to Z=230.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.3 mm over length 89.2 mm (from Z=0.0 to Z=89.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04745", "images": ["images/Shaft_04745.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 189.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 130.1 mm (from Z=0.0 to Z=130.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 53.9 mm (from Z=0.0 to Z=53.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00746", "images": ["images/Shaft_00746.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.4 mm and length at least 268.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 124.8 mm (from Z=0.0 to Z=124.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 138.8 mm (from Z=0.0 to Z=138.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01168", "images": ["images/Shaft_01168.png", "detail_png/Shaft_01168_length.png", "detail_png/Shaft_01168_diam.png", "detail_png/Shaft_01168_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.0 mm and length at least 75.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.7 mm over length 19.7 mm (from Z=0.0 to Z=65.9).\n9. Finish turn diameter Ø45.4 mm over length 17.5 mm (from Z=0.0 to Z=46.2).\n10. Finish turn diameter Ø30.1 mm over length 15.6 mm (from Z=0.0 to Z=28.7).\n11. Finish turn diameter Ø30.0 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02192", "images": ["images/Shaft_02192.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.8 mm and length at least 163.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 84.3 mm (from Z=0.0 to Z=84.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.6 mm over length 31.8 mm (from Z=0.0 to Z=74.2).\n9. Finish turn diameter Ø31.3 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02915", "images": ["images/Shaft_02915.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.4 mm and length at least 290.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 82.3 mm (from Z=0.0 to Z=82.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 203.0 mm (from Z=0.0 to Z=203.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00658", "images": ["images/Shaft_00658.png", "detail_png/Shaft_00658_length.png", "detail_png/Shaft_00658_diam.png", "detail_png/Shaft_00658_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 72.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.0 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03785", "images": ["images/Shaft_03785.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 215.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 174.8 mm (from Z=0.0 to Z=174.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.3 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02533", "images": ["images/Shaft_02533.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.9 mm and length at least 117.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 7.9 mm (from Z=0.0 to Z=7.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.6 mm over length 10.5 mm (from Z=0.0 to Z=104.4).\n9. Finish turn diameter Ø36.0 mm over length 22.0 mm (from Z=0.0 to Z=93.9).\n10. Finish turn diameter Ø30.0 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00681", "images": ["images/Shaft_00681.png", "detail_png/Shaft_00681_length.png", "detail_png/Shaft_00681_diam.png", "detail_png/Shaft_00681_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.7 mm and length at least 314.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.5 mm over length 63.6 mm (from Z=0.0 to Z=239.7).\n10. Finish turn diameter Ø50.9 mm over length 14.2 mm (from Z=0.0 to Z=176.1).\n11. Finish turn diameter Ø38.8 mm over length 67.5 mm (from Z=0.0 to Z=161.9).\n12. Finish turn diameter Ø33.9 mm over length 28.1 mm (from Z=0.0 to Z=94.4).\n13. Finish turn diameter Ø30.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04435", "images": ["images/Shaft_04435.png", "detail_png/Shaft_04435_length.png", "detail_png/Shaft_04435_diam.png", "detail_png/Shaft_04435_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.7 mm and length at least 303.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 128.2 mm (from Z=0.0 to Z=128.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.7 mm over length 95.3 mm (from Z=0.0 to Z=170.6).\n10. Finish turn diameter Ø37.9 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01867", "images": ["images/Shaft_01867.png", "detail_png/Shaft_01867_length.png", "detail_png/Shaft_01867_diam.png", "detail_png/Shaft_01867_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.3 mm and length at least 294.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 142.1 mm (from Z=0.0 to Z=175.6).\n10. Finish turn diameter Ø56.5 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01164", "images": ["images/Shaft_01164.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.2 mm and length at least 233.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.2 mm over length 32.0 mm (from Z=0.0 to Z=32.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.3 mm over length 69.0 mm (from Z=0.0 to Z=196.8).\n10. Finish turn diameter Ø30.2 mm over length 9.0 mm (from Z=0.0 to Z=127.8).\n11. Finish turn diameter Ø30.0 mm over length 118.8 mm (from Z=0.0 to Z=118.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04411", "images": ["images/Shaft_04411.png", "detail_png/Shaft_04411_length.png", "detail_png/Shaft_04411_diam.png", "detail_png/Shaft_04411_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.4 mm and length at least 118.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 43.6 mm (from Z=0.0 to Z=70.0).\n9. Finish turn diameter Ø32.7 mm over length 12.4 mm (from Z=0.0 to Z=26.4).\n10. Finish turn diameter Ø30.0 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00607", "images": ["images/Shaft_00607.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.0 mm and length at least 260.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.5 mm over length 56.5 mm (from Z=0.0 to Z=202.1).\n10. Finish turn diameter Ø47.4 mm over length 68.5 mm (from Z=0.0 to Z=145.6).\n11. Finish turn diameter Ø30.0 mm over length 77.1 mm (from Z=0.0 to Z=77.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00193", "images": ["images/Shaft_00193.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.6 mm and length at least 98.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 10.2 mm (from Z=0.0 to Z=10.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.9 mm (from Z=0.0 to Z=82.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03463", "images": ["images/Shaft_03463.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.4 mm and length at least 146.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.4 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.1 mm over length 11.5 mm (from Z=0.0 to Z=117.7).\n10. Finish turn diameter Ø36.7 mm over length 9.6 mm (from Z=0.0 to Z=106.2).\n11. Finish turn diameter Ø30.0 mm over length 96.6 mm (from Z=0.0 to Z=96.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04158", "images": ["images/Shaft_04158.png", "detail_png/Shaft_04158_length.png", "detail_png/Shaft_04158_diam.png", "detail_png/Shaft_04158_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 214.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 150.5 mm (from Z=0.0 to Z=150.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.1 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01180", "images": ["images/Shaft_01180.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.7 mm and length at least 127.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.9 mm over length 35.9 mm (from Z=0.0 to Z=97.9).\n9. Finish turn diameter Ø37.7 mm over length 17.0 mm (from Z=0.0 to Z=62.0).\n10. Finish turn diameter Ø30.0 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03976", "images": ["images/Shaft_03976.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.1 mm and length at least 95.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.1 mm over length 7.7 mm (from Z=0.0 to Z=7.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.7 mm over length 27.5 mm (from Z=0.0 to Z=83.0).\n9. Finish turn diameter Ø50.1 mm over length 22.7 mm (from Z=0.0 to Z=55.5).\n10. Finish turn diameter Ø37.1 mm over length 27.8 mm (from Z=0.0 to Z=32.8).\n11. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01523", "images": ["images/Shaft_01523.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.2 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.2 mm over length 51.4 mm (from Z=0.0 to Z=51.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.8 mm (from Z=0.0 to Z=181.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01983", "images": ["images/Shaft_01983.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.8 mm and length at least 133.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 32.4 mm (from Z=0.0 to Z=32.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.2 mm over length 24.9 mm (from Z=0.0 to Z=96.0).\n9. Finish turn diameter Ø31.2 mm over length 15.0 mm (from Z=0.0 to Z=71.1).\n10. Finish turn diameter Ø30.0 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00928", "images": ["images/Shaft_00928.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.8 mm and length at least 267.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.8 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 38.6 mm (from Z=0.0 to Z=213.0).\n10. Finish turn diameter Ø34.9 mm over length 74.7 mm (from Z=0.0 to Z=174.4).\n11. Finish turn diameter Ø30.0 mm over length 99.7 mm (from Z=0.0 to Z=99.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04494", "images": ["images/Shaft_04494.png", "detail_png/Shaft_04494_length.png", "detail_png/Shaft_04494_diam.png", "detail_png/Shaft_04494_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.2 mm and length at least 311.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 175.5 mm (from Z=0.0 to Z=175.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 131.4 mm (from Z=0.0 to Z=131.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03232", "images": ["images/Shaft_03232.png", "detail_png/Shaft_03232_length.png", "detail_png/Shaft_03232_diam.png", "detail_png/Shaft_03232_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.1 mm and length at least 311.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.1 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 13.4 mm (from Z=0.0 to Z=281.2).\n10. Finish turn diameter Ø42.5 mm over length 13.1 mm (from Z=0.0 to Z=267.8).\n11. Finish turn diameter Ø32.4 mm over length 86.0 mm (from Z=0.0 to Z=254.7).\n12. Finish turn diameter Ø30.0 mm over length 168.7 mm (from Z=0.0 to Z=168.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00703", "images": ["images/Shaft_00703.png", "detail_png/Shaft_00703_length.png", "detail_png/Shaft_00703_diam.png", "detail_png/Shaft_00703_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.3 mm and length at least 240.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 70.2 mm (from Z=0.0 to Z=70.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.8 mm (from Z=0.0 to Z=164.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01255", "images": ["images/Shaft_01255.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 273.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 153.4 mm (from Z=0.0 to Z=153.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.8 mm over length 115.2 mm (from Z=0.0 to Z=115.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03233", "images": ["images/Shaft_03233.png", "detail_png/Shaft_03233_length.png", "detail_png/Shaft_03233_diam.png", "detail_png/Shaft_03233_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.2 mm and length at least 70.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.0 mm over length 17.7 mm (from Z=0.0 to Z=51.6).\n9. Finish turn diameter Ø38.6 mm over length 7.6 mm (from Z=0.0 to Z=33.9).\n10. Finish turn diameter Ø30.0 mm over length 26.3 mm (from Z=0.0 to Z=26.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03679", "images": ["images/Shaft_03679.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.2 mm and length at least 232.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.2 mm over length 107.3 mm (from Z=0.0 to Z=107.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.2 mm over length 39.3 mm (from Z=0.0 to Z=120.4).\n10. Finish turn diameter Ø31.8 mm over length 81.1 mm (from Z=0.0 to Z=81.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04084", "images": ["images/Shaft_04084.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.3 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 80.0 mm (from Z=0.0 to Z=80.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02323", "images": ["images/Shaft_02323.png", "detail_png/Shaft_02323_length.png", "detail_png/Shaft_02323_diam.png", "detail_png/Shaft_02323_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.4 mm and length at least 284.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.1 mm over length 48.9 mm (from Z=0.0 to Z=234.1).\n10. Finish turn diameter Ø30.0 mm over length 185.2 mm (from Z=0.0 to Z=185.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01245", "images": ["images/Shaft_01245.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø53.5 mm and length at least 219.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 77.3 mm (from Z=0.0 to Z=77.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.0 mm over length 37.2 mm (from Z=0.0 to Z=137.3).\n10. Finish turn diameter Ø30.0 mm over length 100.1 mm (from Z=0.0 to Z=100.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01875", "images": ["images/Shaft_01875.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.6 mm and length at least 171.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.7 mm over length 40.4 mm (from Z=0.0 to Z=161.5).\n9. Finish turn diameter Ø47.6 mm over length 19.2 mm (from Z=0.0 to Z=121.1).\n10. Finish turn diameter Ø39.2 mm over length 32.4 mm (from Z=0.0 to Z=101.9).\n11. Finish turn diameter Ø36.0 mm over length 31.9 mm (from Z=0.0 to Z=69.5).\n12. Finish turn diameter Ø30.0 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01823", "images": ["images/Shaft_01823.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 302.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 207.7 mm (from Z=0.0 to Z=207.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.4 mm over length 90.1 mm (from Z=0.0 to Z=90.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02246", "images": ["images/Shaft_02246.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø52.3 mm and length at least 264.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.3 mm over length 101.3 mm (from Z=0.0 to Z=101.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.6 mm over length 121.3 mm (from Z=0.0 to Z=157.8).\n10. Finish turn diameter Ø30.7 mm over length 36.5 mm (from Z=0.0 to Z=36.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04612", "images": ["images/Shaft_04612.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø63.3 mm and length at least 131.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 30.1 mm (from Z=0.0 to Z=30.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.6 mm over length 14.2 mm (from Z=0.0 to Z=96.0).\n9. Finish turn diameter Ø30.0 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02171", "images": ["images/Shaft_02171.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.0 mm and length at least 278.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 202.0 mm (from Z=0.0 to Z=202.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.5 mm over length 35.7 mm (from Z=0.0 to Z=71.0).\n10. Finish turn diameter Ø56.3 mm over length 35.3 mm (from Z=0.0 to Z=35.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02854", "images": ["images/Shaft_02854.png", "detail_png/Shaft_02854_length.png", "detail_png/Shaft_02854_diam.png", "detail_png/Shaft_02854_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.3 mm and length at least 216.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.3 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.1 mm over length 76.0 mm (from Z=0.0 to Z=148.6).\n10. Finish turn diameter Ø35.3 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04293", "images": ["images/Shaft_04293.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.4 mm and length at least 281.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 91.2 mm (from Z=0.0 to Z=229.2).\n10. Finish turn diameter Ø41.5 mm over length 15.8 mm (from Z=0.0 to Z=138.0).\n11. Finish turn diameter Ø30.0 mm over length 122.2 mm (from Z=0.0 to Z=122.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02430", "images": ["images/Shaft_02430.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.9 mm and length at least 245.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.9 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.1 mm over length 34.8 mm (from Z=0.0 to Z=189.8).\n10. Finish turn diameter Ø35.9 mm over length 25.1 mm (from Z=0.0 to Z=155.0).\n11. Finish turn diameter Ø30.0 mm over length 129.9 mm (from Z=0.0 to Z=129.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01991", "images": ["images/Shaft_01991.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.9 mm and length at least 238.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 125.5 mm (from Z=0.0 to Z=125.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.1 mm over length 42.4 mm (from Z=0.0 to Z=108.1).\n10. Finish turn diameter Ø41.5 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01336", "images": ["images/Shaft_01336.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.6 mm and length at least 280.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.9 mm over length 96.3 mm (from Z=0.0 to Z=193.6).\n10. Finish turn diameter Ø30.6 mm over length 97.3 mm (from Z=0.0 to Z=97.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03222", "images": ["images/Shaft_03222.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.4 mm and length at least 286.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.6 mm over length 40.3 mm (from Z=0.0 to Z=251.5).\n10. Finish turn diameter Ø48.1 mm over length 19.4 mm (from Z=0.0 to Z=211.2).\n11. Finish turn diameter Ø37.9 mm over length 95.0 mm (from Z=0.0 to Z=191.8).\n12. Finish turn diameter Ø30.0 mm over length 96.8 mm (from Z=0.0 to Z=96.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02646", "images": ["images/Shaft_02646.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.7 mm and length at least 142.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 15.4 mm (from Z=0.0 to Z=15.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.4 mm over length 92.6 mm (from Z=0.0 to Z=121.9).\n9. Finish turn diameter Ø38.1 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02685", "images": ["images/Shaft_02685.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.5 mm and length at least 288.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 95.4 mm (from Z=0.0 to Z=95.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 18.2 mm (from Z=0.0 to Z=188.2).\n10. Finish turn diameter Ø53.9 mm over length 124.6 mm (from Z=0.0 to Z=170.0).\n11. Finish turn diameter Ø34.7 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01404", "images": ["images/Shaft_01404.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.4 mm and length at least 198.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.7 mm (from Z=0.0 to Z=148.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02370", "images": ["images/Shaft_02370.png", "detail_png/Shaft_02370_length.png", "detail_png/Shaft_02370_diam.png", "detail_png/Shaft_02370_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.4 mm and length at least 309.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 123.9 mm (from Z=0.0 to Z=123.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.9 mm over length 12.0 mm (from Z=0.0 to Z=180.6).\n10. Finish turn diameter Ø41.1 mm over length 27.5 mm (from Z=0.0 to Z=168.6).\n11. Finish turn diameter Ø30.0 mm over length 141.1 mm (from Z=0.0 to Z=141.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01686", "images": ["images/Shaft_01686.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.5 mm and length at least 232.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.5 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.7 mm over length 56.1 mm (from Z=0.0 to Z=196.9).\n10. Finish turn diameter Ø53.9 mm over length 44.9 mm (from Z=0.0 to Z=140.8).\n11. Finish turn diameter Ø42.8 mm over length 31.7 mm (from Z=0.0 to Z=95.9).\n12. Finish turn diameter Ø38.2 mm over length 64.2 mm (from Z=0.0 to Z=64.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01375", "images": ["images/Shaft_01375.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.9 mm and length at least 283.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.9 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.4 mm over length 112.9 mm (from Z=0.0 to Z=234.9).\n10. Finish turn diameter Ø58.5 mm over length 39.4 mm (from Z=0.0 to Z=122.0).\n11. Finish turn diameter Ø45.3 mm over length 82.6 mm (from Z=0.0 to Z=82.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04078", "images": ["images/Shaft_04078.png", "detail_png/Shaft_04078_length.png", "detail_png/Shaft_04078_diam.png", "detail_png/Shaft_04078_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.1 mm and length at least 173.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 30.5 mm (from Z=0.0 to Z=153.6).\n10. Finish turn diameter Ø30.0 mm over length 123.1 mm (from Z=0.0 to Z=123.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02128", "images": ["images/Shaft_02128.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.8 mm and length at least 80.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 12.9 mm (from Z=0.0 to Z=12.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.3 mm over length 6.9 mm (from Z=0.0 to Z=62.2).\n9. Finish turn diameter Ø51.1 mm over length 21.7 mm (from Z=0.0 to Z=55.3).\n10. Finish turn diameter Ø38.2 mm over length 10.9 mm (from Z=0.0 to Z=33.6).\n11. Finish turn diameter Ø30.4 mm over length 6.4 mm (from Z=0.0 to Z=22.7).\n12. Finish turn diameter Ø30.0 mm over length 16.3 mm (from Z=0.0 to Z=16.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03880", "images": ["images/Shaft_03880.png", "detail_png/Shaft_03880_length.png", "detail_png/Shaft_03880_diam.png", "detail_png/Shaft_03880_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.3 mm and length at least 108.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.2 mm over length 23.6 mm (from Z=0.0 to Z=84.8).\n9. Finish turn diameter Ø30.0 mm over length 61.2 mm (from Z=0.0 to Z=61.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03419", "images": ["images/Shaft_03419.png", "detail_png/Shaft_03419_length.png", "detail_png/Shaft_03419_diam.png", "detail_png/Shaft_03419_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.2 mm and length at least 180.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 79.2 mm (from Z=0.0 to Z=79.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.1 mm over length 70.5 mm (from Z=0.0 to Z=96.7).\n9. Finish turn diameter Ø41.0 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00951", "images": ["images/Shaft_00951.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.0 mm and length at least 243.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.0 mm over length 39.4 mm (from Z=0.0 to Z=39.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.0 mm over length 62.5 mm (from Z=0.0 to Z=199.4).\n10. Finish turn diameter Ø30.0 mm over length 136.9 mm (from Z=0.0 to Z=136.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03284", "images": ["images/Shaft_03284.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.9 mm and length at least 213.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.9 mm over length 16.4 mm (from Z=0.0 to Z=16.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.0 mm over length 59.6 mm (from Z=0.0 to Z=191.6).\n10. Finish turn diameter Ø38.3 mm over length 51.6 mm (from Z=0.0 to Z=132.0).\n11. Finish turn diameter Ø30.0 mm over length 80.4 mm (from Z=0.0 to Z=80.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04241", "images": ["images/Shaft_04241.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 150.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 110.0 mm (from Z=0.0 to Z=110.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.8 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00090", "images": ["images/Shaft_00090.png", "detail_png/Shaft_00090_length.png", "detail_png/Shaft_00090_diam.png", "detail_png/Shaft_00090_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.4 mm and length at least 235.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.4 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.2 mm over length 34.0 mm (from Z=0.0 to Z=185.9).\n10. Finish turn diameter Ø30.0 mm over length 151.9 mm (from Z=0.0 to Z=151.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00257", "images": ["images/Shaft_00257.png", "detail_png/Shaft_00257_length.png", "detail_png/Shaft_00257_diam.png", "detail_png/Shaft_00257_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø61.0 mm and length at least 215.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 21.1 mm (from Z=0.0 to Z=154.7).\n10. Finish turn diameter Ø35.7 mm over length 85.2 mm (from Z=0.0 to Z=133.6).\n11. Finish turn diameter Ø30.0 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00774", "images": ["images/Shaft_00774.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.2 mm and length at least 272.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.2 mm over length 59.7 mm (from Z=0.0 to Z=209.9).\n10. Finish turn diameter Ø30.0 mm over length 150.2 mm (from Z=0.0 to Z=150.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01194", "images": ["images/Shaft_01194.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.9 mm and length at least 245.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.2 mm over length 107.1 mm (from Z=0.0 to Z=198.1).\n10. Finish turn diameter Ø31.2 mm over length 91.0 mm (from Z=0.0 to Z=91.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00087", "images": ["images/Shaft_00087.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.9 mm and length at least 156.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.9 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.8 mm over length 67.2 mm (from Z=0.0 to Z=115.5).\n9. Finish turn diameter Ø30.0 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02640", "images": ["images/Shaft_02640.png", "detail_png/Shaft_02640_length.png", "detail_png/Shaft_02640_diam.png", "detail_png/Shaft_02640_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.8 mm and length at least 152.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.9 mm over length 68.5 mm (from Z=0.0 to Z=97.3).\n9. Finish turn diameter Ø30.0 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03021", "images": ["images/Shaft_03021.png", "detail_png/Shaft_03021_length.png", "detail_png/Shaft_03021_diam.png", "detail_png/Shaft_03021_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.1 mm and length at least 308.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 71.7 mm (from Z=0.0 to Z=71.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 82.9 mm (from Z=0.0 to Z=232.2).\n10. Finish turn diameter Ø30.0 mm over length 149.3 mm (from Z=0.0 to Z=149.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01818", "images": ["images/Shaft_01818.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.6 mm and length at least 108.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 17.4 mm (from Z=0.0 to Z=17.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.0 mm over length 50.9 mm (from Z=0.0 to Z=85.6).\n9. Finish turn diameter Ø36.0 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01720", "images": ["images/Shaft_01720.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.8 mm and length at least 111.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 72.6 mm (from Z=0.0 to Z=72.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04342", "images": ["images/Shaft_04342.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.0 mm and length at least 157.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 62.6 mm (from Z=0.0 to Z=110.8).\n9. Finish turn diameter Ø39.9 mm over length 48.2 mm (from Z=0.0 to Z=48.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01941", "images": ["images/Shaft_01941.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.6 mm and length at least 123.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 107.1 mm (from Z=0.0 to Z=107.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00540", "images": ["images/Shaft_00540.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.2 mm and length at least 212.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.2 mm over length 9.2 mm (from Z=0.0 to Z=9.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.9 mm over length 17.9 mm (from Z=0.0 to Z=198.3).\n10. Finish turn diameter Ø48.0 mm over length 9.3 mm (from Z=0.0 to Z=180.4).\n11. Finish turn diameter Ø35.7 mm over length 37.6 mm (from Z=0.0 to Z=171.1).\n12. Finish turn diameter Ø30.0 mm over length 133.5 mm (from Z=0.0 to Z=133.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03816", "images": ["images/Shaft_03816.png", "detail_png/Shaft_03816_length.png", "detail_png/Shaft_03816_diam.png", "detail_png/Shaft_03816_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.0 mm and length at least 139.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 14.8 mm (from Z=0.0 to Z=14.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.7 mm over length 69.4 mm (from Z=0.0 to Z=120.1).\n9. Finish turn diameter Ø60.0 mm over length 28.3 mm (from Z=0.0 to Z=50.7).\n10. Finish turn diameter Ø54.5 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02217", "images": ["images/Shaft_02217.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.9 mm and length at least 242.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.9 mm over length 88.6 mm (from Z=0.0 to Z=88.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 148.8 mm (from Z=0.0 to Z=148.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02795", "images": ["images/Shaft_02795.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 216.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 198.6 mm (from Z=0.0 to Z=198.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 12.4 mm (from Z=0.0 to Z=12.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04597", "images": ["images/Shaft_04597.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.1 mm and length at least 226.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 52.5 mm (from Z=0.0 to Z=52.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.6 mm over length 14.5 mm (from Z=0.0 to Z=168.9).\n10. Finish turn diameter Ø30.0 mm over length 154.4 mm (from Z=0.0 to Z=154.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04935", "images": ["images/Shaft_04935.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.9 mm and length at least 79.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 14.7 mm (from Z=0.0 to Z=14.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01200", "images": ["images/Shaft_01200.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.8 mm and length at least 209.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.8 mm over length 45.7 mm (from Z=0.0 to Z=45.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.4 mm over length 30.5 mm (from Z=0.0 to Z=158.5).\n10. Finish turn diameter Ø48.7 mm over length 47.8 mm (from Z=0.0 to Z=128.0).\n11. Finish turn diameter Ø32.5 mm over length 20.4 mm (from Z=0.0 to Z=80.2).\n12. Finish turn diameter Ø30.0 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04975", "images": ["images/Shaft_04975.png", "detail_png/Shaft_04975_length.png", "detail_png/Shaft_04975_diam.png", "detail_png/Shaft_04975_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø72.1 mm and length at least 188.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.1 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.3 mm over length 36.3 mm (from Z=0.0 to Z=145.9).\n9. Finish turn diameter Ø54.4 mm over length 30.7 mm (from Z=0.0 to Z=109.6).\n10. Finish turn diameter Ø38.6 mm over length 24.0 mm (from Z=0.0 to Z=78.9).\n11. Finish turn diameter Ø32.9 mm over length 20.1 mm (from Z=0.0 to Z=54.9).\n12. Finish turn diameter Ø30.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02569", "images": ["images/Shaft_02569.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 90.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 68.4 mm (from Z=0.0 to Z=68.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.0 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04316", "images": ["images/Shaft_04316.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.7 mm and length at least 249.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.7 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 220.6 mm (from Z=0.0 to Z=220.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02132", "images": ["images/Shaft_02132.png", "detail_png/Shaft_02132_length.png", "detail_png/Shaft_02132_diam.png", "detail_png/Shaft_02132_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.5 mm and length at least 101.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 19.7 mm (from Z=0.0 to Z=19.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 77.1 mm (from Z=0.0 to Z=77.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01673", "images": ["images/Shaft_01673.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.6 mm and length at least 262.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 64.2 mm (from Z=0.0 to Z=240.2).\n10. Finish turn diameter Ø30.0 mm over length 176.0 mm (from Z=0.0 to Z=176.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01232", "images": ["images/Shaft_01232.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 185.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.2 mm (from Z=0.0 to Z=167.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.7 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04065", "images": ["images/Shaft_04065.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.6 mm and length at least 148.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 57.9 mm (from Z=0.0 to Z=57.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 85.3 mm (from Z=0.0 to Z=85.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01212", "images": ["images/Shaft_01212.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.9 mm and length at least 100.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.9 mm (from Z=0.0 to Z=78.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00917", "images": ["images/Shaft_00917.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.1 mm and length at least 210.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.1 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 140.4 mm (from Z=0.0 to Z=140.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02260", "images": ["images/Shaft_02260.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.9 mm and length at least 65.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01349", "images": ["images/Shaft_01349.png", "detail_png/Shaft_01349_length.png", "detail_png/Shaft_01349_diam.png", "detail_png/Shaft_01349_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 133.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 78.2 mm (from Z=0.0 to Z=78.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.4 mm over length 50.2 mm (from Z=0.0 to Z=50.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00895", "images": ["images/Shaft_00895.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.7 mm and length at least 313.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 214.0 mm (from Z=0.0 to Z=214.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.8 mm over length 63.0 mm (from Z=0.0 to Z=94.1).\n10. Finish turn diameter Ø46.2 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00630", "images": ["images/Shaft_00630.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.9 mm and length at least 231.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.9 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.7 mm over length 44.4 mm (from Z=0.0 to Z=138.3).\n10. Finish turn diameter Ø30.0 mm over length 93.9 mm (from Z=0.0 to Z=93.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02362", "images": ["images/Shaft_02362.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø78.6 mm and length at least 274.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 46.0 mm (from Z=0.0 to Z=46.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.7 mm over length 37.6 mm (from Z=0.0 to Z=223.6).\n10. Finish turn diameter Ø51.2 mm over length 36.4 mm (from Z=0.0 to Z=186.0).\n11. Finish turn diameter Ø43.9 mm over length 75.4 mm (from Z=0.0 to Z=149.6).\n12. Finish turn diameter Ø30.0 mm over length 74.2 mm (from Z=0.0 to Z=74.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01464", "images": ["images/Shaft_01464.png", "detail_png/Shaft_01464_length.png", "detail_png/Shaft_01464_diam.png", "detail_png/Shaft_01464_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø73.3 mm and length at least 134.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.1 mm over length 15.4 mm (from Z=0.0 to Z=103.9).\n9. Finish turn diameter Ø51.7 mm over length 28.0 mm (from Z=0.0 to Z=88.5).\n10. Finish turn diameter Ø32.7 mm over length 16.6 mm (from Z=0.0 to Z=60.5).\n11. Finish turn diameter Ø30.0 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03200", "images": ["images/Shaft_03200.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.7 mm and length at least 206.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 51.7 mm (from Z=0.0 to Z=51.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.7 mm over length 9.4 mm (from Z=0.0 to Z=149.6).\n10. Finish turn diameter Ø30.0 mm over length 140.2 mm (from Z=0.0 to Z=140.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00656", "images": ["images/Shaft_00656.png", "detail_png/Shaft_00656_length.png", "detail_png/Shaft_00656_diam.png", "detail_png/Shaft_00656_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.8 mm and length at least 249.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.8 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 187.7 mm (from Z=0.0 to Z=187.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00715", "images": ["images/Shaft_00715.png", "detail_png/Shaft_00715_length.png", "detail_png/Shaft_00715_diam.png", "detail_png/Shaft_00715_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.9 mm and length at least 229.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.9 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 70.3 mm (from Z=0.0 to Z=172.6).\n10. Finish turn diameter Ø32.3 mm over length 102.3 mm (from Z=0.0 to Z=102.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03750", "images": ["images/Shaft_03750.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.1 mm and length at least 190.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.1 mm over length 31.8 mm (from Z=0.0 to Z=31.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.3 mm over length 110.9 mm (from Z=0.0 to Z=153.2).\n9. Finish turn diameter Ø30.0 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01542", "images": ["images/Shaft_01542.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.4 mm and length at least 289.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 89.4 mm (from Z=0.0 to Z=215.9).\n10. Finish turn diameter Ø36.7 mm over length 52.8 mm (from Z=0.0 to Z=126.5).\n11. Finish turn diameter Ø30.0 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00537", "images": ["images/Shaft_00537.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.2 mm and length at least 96.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.2 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 77.8 mm (from Z=0.0 to Z=77.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03015", "images": ["images/Shaft_03015.png", "detail_png/Shaft_03015_length.png", "detail_png/Shaft_03015_diam.png", "detail_png/Shaft_03015_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.8 mm and length at least 143.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.8 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.4 mm over length 40.5 mm (from Z=0.0 to Z=113.0).\n9. Finish turn diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04909", "images": ["images/Shaft_04909.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.6 mm and length at least 188.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.6 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.8 mm over length 77.3 mm (from Z=0.0 to Z=160.9).\n9. Finish turn diameter Ø49.4 mm over length 25.2 mm (from Z=0.0 to Z=83.6).\n10. Finish turn diameter Ø35.6 mm over length 40.4 mm (from Z=0.0 to Z=58.4).\n11. Finish turn diameter Ø30.0 mm over length 18.0 mm (from Z=0.0 to Z=18.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02394", "images": ["images/Shaft_02394.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.1 mm and length at least 277.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 49.7 mm (from Z=0.0 to Z=49.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.9 mm over length 39.6 mm (from Z=0.0 to Z=222.6).\n10. Finish turn diameter Ø30.0 mm over length 183.0 mm (from Z=0.0 to Z=183.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03851", "images": ["images/Shaft_03851.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.2 mm and length at least 219.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.2 mm over length 33.5 mm (from Z=0.0 to Z=33.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 181.3 mm (from Z=0.0 to Z=181.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01005", "images": ["images/Shaft_01005.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.8 mm and length at least 274.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 72.8 mm (from Z=0.0 to Z=72.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.1 mm over length 48.2 mm (from Z=0.0 to Z=196.6).\n10. Finish turn diameter Ø54.1 mm over length 19.0 mm (from Z=0.0 to Z=148.4).\n11. Finish turn diameter Ø47.6 mm over length 30.9 mm (from Z=0.0 to Z=129.4).\n12. Finish turn diameter Ø41.6 mm over length 67.6 mm (from Z=0.0 to Z=98.5).\n13. Finish turn diameter Ø37.0 mm over length 30.9 mm (from Z=0.0 to Z=30.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04107", "images": ["images/Shaft_04107.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 240.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 50.1 mm (from Z=0.0 to Z=50.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.8 mm over length 62.4 mm (from Z=0.0 to Z=185.1).\n10. Finish turn diameter Ø30.0 mm over length 122.7 mm (from Z=0.0 to Z=122.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03983", "images": ["images/Shaft_03983.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.0 mm and length at least 110.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 12.5 mm (from Z=0.0 to Z=12.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.9 mm over length 12.6 mm (from Z=0.0 to Z=92.9).\n9. Finish turn diameter Ø47.7 mm over length 26.2 mm (from Z=0.0 to Z=80.3).\n10. Finish turn diameter Ø33.2 mm over length 13.8 mm (from Z=0.0 to Z=54.1).\n11. Finish turn diameter Ø30.0 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04185", "images": ["images/Shaft_04185.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.0 mm and length at least 225.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.0 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.0 mm over length 23.9 mm (from Z=0.0 to Z=174.5).\n10. Finish turn diameter Ø56.3 mm over length 40.8 mm (from Z=0.0 to Z=150.6).\n11. Finish turn diameter Ø46.5 mm over length 19.3 mm (from Z=0.0 to Z=109.8).\n12. Finish turn diameter Ø31.3 mm over length 46.6 mm (from Z=0.0 to Z=90.5).\n13. Finish turn diameter Ø30.0 mm over length 43.9 mm (from Z=0.0 to Z=43.9).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02828", "images": ["images/Shaft_02828.png", "detail_png/Shaft_02828_length.png", "detail_png/Shaft_02828_diam.png", "detail_png/Shaft_02828_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.5 mm and length at least 192.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.8 mm over length 43.6 mm (from Z=0.0 to Z=144.8).\n10. Finish turn diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03054", "images": ["images/Shaft_03054.png", "detail_png/Shaft_03054_length.png", "detail_png/Shaft_03054_diam.png", "detail_png/Shaft_03054_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.2 mm and length at least 86.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.0 mm over length 28.9 mm (from Z=0.0 to Z=53.1).\n9. Finish turn diameter Ø55.3 mm over length 5.0 mm (from Z=0.0 to Z=24.2).\n10. Finish turn diameter Ø50.1 mm over length 19.2 mm (from Z=0.0 to Z=19.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00519", "images": ["images/Shaft_00519.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.1 mm and length at least 67.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.7 mm over length 6.2 mm (from Z=0.0 to Z=43.3).\n9. Finish turn diameter Ø30.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00446", "images": ["images/Shaft_00446.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.2 mm and length at least 292.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 66.4 mm (from Z=0.0 to Z=66.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 113.0 mm (from Z=0.0 to Z=220.7).\n10. Finish turn diameter Ø30.0 mm over length 107.7 mm (from Z=0.0 to Z=107.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02270", "images": ["images/Shaft_02270.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.0 mm and length at least 222.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.0 mm over length 84.7 mm (from Z=0.0 to Z=84.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.4 mm over length 70.5 mm (from Z=0.0 to Z=133.1).\n10. Finish turn diameter Ø30.6 mm over length 62.6 mm (from Z=0.0 to Z=62.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03464", "images": ["images/Shaft_03464.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.9 mm and length at least 166.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.9 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 114.3 mm (from Z=0.0 to Z=114.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04125", "images": ["images/Shaft_04125.png", "detail_png/Shaft_04125_length.png", "detail_png/Shaft_04125_diam.png", "detail_png/Shaft_04125_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø73.6 mm and length at least 155.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.6 mm over length 9.7 mm (from Z=0.0 to Z=9.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.1 mm over length 51.6 mm (from Z=0.0 to Z=140.6).\n9. Finish turn diameter Ø48.1 mm over length 50.1 mm (from Z=0.0 to Z=89.0).\n10. Finish turn diameter Ø36.9 mm over length 38.9 mm (from Z=0.0 to Z=38.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02190", "images": ["images/Shaft_02190.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.2 mm and length at least 95.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 24.6 mm (from Z=0.0 to Z=24.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.8 mm over length 5.0 mm (from Z=0.0 to Z=66.2).\n9. Finish turn diameter Ø48.6 mm over length 24.5 mm (from Z=0.0 to Z=61.2).\n10. Finish turn diameter Ø37.2 mm over length 5.0 mm (from Z=0.0 to Z=36.7).\n11. Finish turn diameter Ø30.0 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02889", "images": ["images/Shaft_02889.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.7 mm and length at least 239.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 78.5 mm (from Z=0.0 to Z=78.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.1 mm over length 31.9 mm (from Z=0.0 to Z=156.1).\n10. Finish turn diameter Ø41.2 mm over length 39.0 mm (from Z=0.0 to Z=124.2).\n11. Finish turn diameter Ø32.9 mm over length 85.2 mm (from Z=0.0 to Z=85.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02625", "images": ["images/Shaft_02625.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.2 mm and length at least 74.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.2 mm over length 13.5 mm (from Z=0.0 to Z=13.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.9 mm over length 5.1 mm (from Z=0.0 to Z=55.7).\n9. Finish turn diameter Ø30.0 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01846", "images": ["images/Shaft_01846.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.5 mm and length at least 115.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.5 mm over length 22.8 mm (from Z=0.0 to Z=74.1).\n9. Finish turn diameter Ø39.4 mm over length 14.3 mm (from Z=0.0 to Z=51.3).\n10. Finish turn diameter Ø30.0 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01718", "images": ["images/Shaft_01718.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.8 mm and length at least 276.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.1 mm over length 34.2 mm (from Z=0.0 to Z=214.5).\n10. Finish turn diameter Ø35.3 mm over length 50.0 mm (from Z=0.0 to Z=180.3).\n11. Finish turn diameter Ø30.0 mm over length 130.3 mm (from Z=0.0 to Z=130.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03919", "images": ["images/Shaft_03919.png", "detail_png/Shaft_03919_length.png", "detail_png/Shaft_03919_diam.png", "detail_png/Shaft_03919_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.1 mm and length at least 187.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.6 mm over length 30.0 mm (from Z=0.0 to Z=152.7).\n9. Finish turn diameter Ø32.7 mm over length 56.7 mm (from Z=0.0 to Z=122.7).\n10. Finish turn diameter Ø30.0 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00930", "images": ["images/Shaft_00930.png", "detail_png/Shaft_00930_length.png", "detail_png/Shaft_00930_diam.png", "detail_png/Shaft_00930_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.1 mm and length at least 180.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.1 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.2 mm over length 19.7 mm (from Z=0.0 to Z=120.2).\n9. Finish turn diameter Ø31.5 mm over length 76.8 mm (from Z=0.0 to Z=100.5).\n10. Finish turn diameter Ø30.0 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04763", "images": ["images/Shaft_04763.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 152.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 128.4 mm (from Z=0.0 to Z=128.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.0 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02743", "images": ["images/Shaft_02743.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.3 mm and length at least 71.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 61.1 mm (from Z=0.0 to Z=61.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01133", "images": ["images/Shaft_01133.png", "detail_png/Shaft_01133_length.png", "detail_png/Shaft_01133_diam.png", "detail_png/Shaft_01133_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.1 mm and length at least 173.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 38.0 mm (from Z=0.0 to Z=131.7).\n10. Finish turn diameter Ø30.0 mm over length 93.7 mm (from Z=0.0 to Z=93.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01677", "images": ["images/Shaft_01677.png", "detail_png/Shaft_01677_length.png", "detail_png/Shaft_01677_diam.png", "detail_png/Shaft_01677_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.6 mm and length at least 319.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.8 mm over length 141.3 mm (from Z=0.0 to Z=232.0).\n10. Finish turn diameter Ø46.0 mm over length 90.7 mm (from Z=0.0 to Z=90.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00548", "images": ["images/Shaft_00548.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.7 mm and length at least 261.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.7 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 58.7 mm (from Z=0.0 to Z=214.2).\n10. Finish turn diameter Ø46.1 mm over length 45.5 mm (from Z=0.0 to Z=155.5).\n11. Finish turn diameter Ø36.8 mm over length 110.0 mm (from Z=0.0 to Z=110.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01435", "images": ["images/Shaft_01435.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.0 mm and length at least 178.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.6 mm over length 36.0 mm (from Z=0.0 to Z=138.0).\n10. Finish turn diameter Ø44.1 mm over length 5.6 mm (from Z=0.0 to Z=102.0).\n11. Finish turn diameter Ø30.0 mm over length 96.4 mm (from Z=0.0 to Z=96.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03001", "images": ["images/Shaft_03001.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.9 mm and length at least 153.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 55.6 mm (from Z=0.0 to Z=55.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.1 mm over length 23.2 mm (from Z=0.0 to Z=93.1).\n9. Finish turn diameter Ø33.2 mm over length 69.9 mm (from Z=0.0 to Z=69.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04144", "images": ["images/Shaft_04144.png", "detail_png/Shaft_04144_length.png", "detail_png/Shaft_04144_diam.png", "detail_png/Shaft_04144_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 85.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 72.5 mm (from Z=0.0 to Z=72.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.1 mm over length 7.5 mm (from Z=0.0 to Z=7.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00334", "images": ["images/Shaft_00334.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.3 mm and length at least 150.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.3 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.5 mm (from Z=0.0 to Z=105.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04800", "images": ["images/Shaft_04800.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø40.0 mm and length at least 180.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.0 mm over length 43.1 mm (from Z=0.0 to Z=43.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.8 mm over length 41.7 mm (from Z=0.0 to Z=131.9).\n10. Finish turn diameter Ø30.0 mm over length 90.2 mm (from Z=0.0 to Z=90.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02994", "images": ["images/Shaft_02994.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 186.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 156.4 mm (from Z=0.0 to Z=156.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03137", "images": ["images/Shaft_03137.png", "detail_png/Shaft_03137_length.png", "detail_png/Shaft_03137_diam.png", "detail_png/Shaft_03137_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.2 mm and length at least 248.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 74.1 mm (from Z=0.0 to Z=74.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.6 mm (from Z=0.0 to Z=169.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00909", "images": ["images/Shaft_00909.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.6 mm and length at least 314.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.2 mm over length 113.6 mm (from Z=0.0 to Z=234.9).\n10. Finish turn diameter Ø58.1 mm over length 121.3 mm (from Z=0.0 to Z=121.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04601", "images": ["images/Shaft_04601.png", "detail_png/Shaft_04601_length.png", "detail_png/Shaft_04601_diam.png", "detail_png/Shaft_04601_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.7 mm and length at least 249.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.7 mm over length 22.5 mm (from Z=0.0 to Z=188.0).\n10. Finish turn diameter Ø45.6 mm over length 41.4 mm (from Z=0.0 to Z=165.5).\n11. Finish turn diameter Ø31.5 mm over length 56.9 mm (from Z=0.0 to Z=124.1).\n12. Finish turn diameter Ø30.0 mm over length 67.2 mm (from Z=0.0 to Z=67.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02981", "images": ["images/Shaft_02981.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.7 mm and length at least 81.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.3 mm over length 22.3 mm (from Z=0.0 to Z=67.6).\n9. Finish turn diameter Ø37.1 mm over length 6.2 mm (from Z=0.0 to Z=45.3).\n10. Finish turn diameter Ø30.0 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00449", "images": ["images/Shaft_00449.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 112.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 68.9 mm (from Z=0.0 to Z=68.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.9 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02750", "images": ["images/Shaft_02750.png", "detail_png/Shaft_02750_length.png", "detail_png/Shaft_02750_diam.png", "detail_png/Shaft_02750_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.1 mm and length at least 223.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 191.1 mm (from Z=0.0 to Z=191.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00663", "images": ["images/Shaft_00663.png", "detail_png/Shaft_00663_length.png", "detail_png/Shaft_00663_diam.png", "detail_png/Shaft_00663_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.0 mm and length at least 210.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.0 mm over length 83.9 mm (from Z=0.0 to Z=83.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.2 mm over length 69.7 mm (from Z=0.0 to Z=121.3).\n10. Finish turn diameter Ø47.6 mm over length 51.6 mm (from Z=0.0 to Z=51.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01696", "images": ["images/Shaft_01696.png", "detail_png/Shaft_01696_length.png", "detail_png/Shaft_01696_diam.png", "detail_png/Shaft_01696_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.5 mm and length at least 102.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.4 mm over length 8.2 mm (from Z=0.0 to Z=55.3).\n9. Finish turn diameter Ø50.7 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02210", "images": ["images/Shaft_02210.png", "detail_png/Shaft_02210_length.png", "detail_png/Shaft_02210_diam.png", "detail_png/Shaft_02210_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.3 mm and length at least 170.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 45.8 mm (from Z=0.0 to Z=45.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.3 mm (from Z=0.0 to Z=119.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03488", "images": ["images/Shaft_03488.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.1 mm and length at least 245.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 94.2 mm (from Z=0.0 to Z=94.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.9 mm over length 83.5 mm (from Z=0.0 to Z=146.4).\n10. Finish turn diameter Ø55.4 mm over length 20.7 mm (from Z=0.0 to Z=62.9).\n11. Finish turn diameter Ø48.6 mm over length 42.2 mm (from Z=0.0 to Z=42.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02429", "images": ["images/Shaft_02429.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 139.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 134.0 mm (from Z=0.0 to Z=134.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Break all edges (e.g., 2×45° where applicable).\n9. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00267", "images": ["images/Shaft_00267.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.5 mm and length at least 152.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.8 mm over length 39.9 mm (from Z=0.0 to Z=121.7).\n9. Finish turn diameter Ø38.2 mm over length 8.2 mm (from Z=0.0 to Z=81.8).\n10. Finish turn diameter Ø30.0 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02727", "images": ["images/Shaft_02727.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.2 mm and length at least 264.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.2 mm over length 9.5 mm (from Z=0.0 to Z=9.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.1 mm over length 35.6 mm (from Z=0.0 to Z=250.3).\n10. Finish turn diameter Ø37.0 mm over length 39.0 mm (from Z=0.0 to Z=214.7).\n11. Finish turn diameter Ø30.0 mm over length 175.7 mm (from Z=0.0 to Z=175.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03152", "images": ["images/Shaft_03152.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.6 mm and length at least 179.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.6 mm over length 44.8 mm (from Z=0.0 to Z=44.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.5 mm over length 28.3 mm (from Z=0.0 to Z=130.1).\n9. Finish turn diameter Ø43.6 mm over length 39.6 mm (from Z=0.0 to Z=101.8).\n10. Finish turn diameter Ø38.0 mm over length 14.5 mm (from Z=0.0 to Z=62.2).\n11. Finish turn diameter Ø30.0 mm over length 47.7 mm (from Z=0.0 to Z=47.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00579", "images": ["images/Shaft_00579.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.9 mm and length at least 299.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 125.2 mm (from Z=0.0 to Z=125.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.7 mm (from Z=0.0 to Z=169.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00011", "images": ["images/Shaft_00011.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.0 mm and length at least 262.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 67.9 mm (from Z=0.0 to Z=67.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 189.2 mm (from Z=0.0 to Z=189.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03803", "images": ["images/Shaft_03803.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.0 mm and length at least 278.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.0 mm over length 89.4 mm (from Z=0.0 to Z=89.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.3 mm over length 37.5 mm (from Z=0.0 to Z=183.7).\n10. Finish turn diameter Ø30.1 mm over length 50.7 mm (from Z=0.0 to Z=146.2).\n11. Finish turn diameter Ø30.0 mm over length 95.5 mm (from Z=0.0 to Z=95.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03034", "images": ["images/Shaft_03034.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.4 mm and length at least 202.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 48.0 mm (from Z=0.0 to Z=48.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.2 mm (from Z=0.0 to Z=149.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01515", "images": ["images/Shaft_01515.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.5 mm and length at least 184.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 34.4 mm (from Z=0.0 to Z=34.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.2 mm over length 30.8 mm (from Z=0.0 to Z=145.4).\n10. Finish turn diameter Ø30.0 mm over length 114.6 mm (from Z=0.0 to Z=114.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03320", "images": ["images/Shaft_03320.png", "detail_png/Shaft_03320_length.png", "detail_png/Shaft_03320_diam.png", "detail_png/Shaft_03320_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.4 mm and length at least 204.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.7 mm over length 62.0 mm (from Z=0.0 to Z=157.6).\n10. Finish turn diameter Ø38.2 mm over length 73.1 mm (from Z=0.0 to Z=95.6).\n11. Finish turn diameter Ø30.0 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01135", "images": ["images/Shaft_01135.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.7 mm and length at least 206.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.7 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.4 mm over length 40.4 mm (from Z=0.0 to Z=172.6).\n10. Finish turn diameter Ø54.9 mm over length 30.6 mm (from Z=0.0 to Z=132.2).\n11. Finish turn diameter Ø36.0 mm over length 38.1 mm (from Z=0.0 to Z=101.6).\n12. Finish turn diameter Ø30.0 mm over length 63.5 mm (from Z=0.0 to Z=63.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03799", "images": ["images/Shaft_03799.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø71.8 mm and length at least 94.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 6.8 mm (from Z=0.0 to Z=6.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.0 mm over length 45.9 mm (from Z=0.0 to Z=82.5).\n9. Finish turn diameter Ø43.6 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03726", "images": ["images/Shaft_03726.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø50.4 mm and length at least 300.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 101.3 mm (from Z=0.0 to Z=101.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.5 mm over length 19.8 mm (from Z=0.0 to Z=194.3).\n10. Finish turn diameter Ø30.0 mm over length 174.5 mm (from Z=0.0 to Z=174.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00199", "images": ["images/Shaft_00199.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.8 mm and length at least 141.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.8 mm over length 30.4 mm (from Z=0.0 to Z=30.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.9 mm (from Z=0.0 to Z=105.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03762", "images": ["images/Shaft_03762.png", "detail_png/Shaft_03762_length.png", "detail_png/Shaft_03762_diam.png", "detail_png/Shaft_03762_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 322.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 131.5 mm (from Z=0.0 to Z=131.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.6 mm over length 88.2 mm (from Z=0.0 to Z=186.2).\n10. Finish turn diameter Ø39.2 mm over length 98.0 mm (from Z=0.0 to Z=98.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01325", "images": ["images/Shaft_01325.png", "detail_png/Shaft_01325_length.png", "detail_png/Shaft_01325_diam.png", "detail_png/Shaft_01325_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.6 mm and length at least 297.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.6 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø73.1 mm over length 83.7 mm (from Z=0.0 to Z=252.9).\n10. Finish turn diameter Ø61.8 mm over length 62.0 mm (from Z=0.0 to Z=169.2).\n11. Finish turn diameter Ø55.6 mm over length 67.3 mm (from Z=0.0 to Z=107.2).\n12. Finish turn diameter Ø35.9 mm over length 39.9 mm (from Z=0.0 to Z=39.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02497", "images": ["images/Shaft_02497.png", "detail_png/Shaft_02497_length.png", "detail_png/Shaft_02497_diam.png", "detail_png/Shaft_02497_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.6 mm and length at least 217.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.6 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 36.6 mm (from Z=0.0 to Z=166.3).\n10. Finish turn diameter Ø50.1 mm over length 55.8 mm (from Z=0.0 to Z=129.7).\n11. Finish turn diameter Ø38.5 mm over length 11.6 mm (from Z=0.0 to Z=73.9).\n12. Finish turn diameter Ø30.0 mm over length 62.3 mm (from Z=0.0 to Z=62.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03930", "images": ["images/Shaft_03930.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø44.3 mm and length at least 101.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.3 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00130", "images": ["images/Shaft_00130.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø52.2 mm and length at least 255.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.2 mm over length 136.4 mm (from Z=0.0 to Z=136.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.9 mm over length 19.8 mm (from Z=0.0 to Z=114.2).\n10. Finish turn diameter Ø32.9 mm over length 45.9 mm (from Z=0.0 to Z=94.4).\n11. Finish turn diameter Ø30.0 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00743", "images": ["images/Shaft_00743.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.7 mm and length at least 302.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.7 mm over length 71.1 mm (from Z=0.0 to Z=71.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 226.4 mm (from Z=0.0 to Z=226.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01958", "images": ["images/Shaft_01958.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.2 mm and length at least 90.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø75.4 mm over length 26.1 mm (from Z=0.0 to Z=48.1).\n9. Finish turn diameter Ø71.4 mm over length 16.0 mm (from Z=0.0 to Z=22.0).\n10. Finish turn diameter Ø66.9 mm over length 6.0 mm (from Z=0.0 to Z=6.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02423", "images": ["images/Shaft_02423.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.9 mm and length at least 262.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.5 mm over length 95.7 mm (from Z=0.0 to Z=196.9).\n10. Finish turn diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02936", "images": ["images/Shaft_02936.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.1 mm and length at least 76.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.1 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.3 mm over length 18.7 mm (from Z=0.0 to Z=62.7).\n9. Finish turn diameter Ø30.0 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04883", "images": ["images/Shaft_04883.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.5 mm and length at least 79.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.5 mm over length 8.4 mm (from Z=0.0 to Z=8.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.1 mm over length 18.5 mm (from Z=0.0 to Z=65.8).\n9. Finish turn diameter Ø39.4 mm over length 15.1 mm (from Z=0.0 to Z=47.3).\n10. Finish turn diameter Ø30.0 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01785", "images": ["images/Shaft_01785.png", "detail_png/Shaft_01785_length.png", "detail_png/Shaft_01785_diam.png", "detail_png/Shaft_01785_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.7 mm and length at least 112.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.3 mm over length 21.2 mm (from Z=0.0 to Z=83.4).\n9. Finish turn diameter Ø36.7 mm over length 24.5 mm (from Z=0.0 to Z=62.2).\n10. Finish turn diameter Ø31.3 mm over length 5.0 mm (from Z=0.0 to Z=37.7).\n11. Finish turn diameter Ø30.0 mm over length 32.7 mm (from Z=0.0 to Z=32.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03331", "images": ["images/Shaft_03331.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.7 mm and length at least 210.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 149.4 mm (from Z=0.0 to Z=149.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00101", "images": ["images/Shaft_00101.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.6 mm and length at least 77.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.6 mm over length 10.8 mm (from Z=0.0 to Z=55.8).\n9. Finish turn diameter Ø30.0 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00680", "images": ["images/Shaft_00680.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.9 mm and length at least 90.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 7.8 mm (from Z=0.0 to Z=7.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.2 mm over length 17.6 mm (from Z=0.0 to Z=77.6).\n9. Finish turn diameter Ø48.6 mm over length 10.3 mm (from Z=0.0 to Z=60.0).\n10. Finish turn diameter Ø33.8 mm over length 23.9 mm (from Z=0.0 to Z=49.7).\n11. Finish turn diameter Ø30.0 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01970", "images": ["images/Shaft_01970.png", "detail_png/Shaft_01970_length.png", "detail_png/Shaft_01970_diam.png", "detail_png/Shaft_01970_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø48.7 mm and length at least 269.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.7 mm over length 130.0 mm (from Z=0.0 to Z=130.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.5 mm over length 117.3 mm (from Z=0.0 to Z=134.5).\n10. Finish turn diameter Ø30.0 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04057", "images": ["images/Shaft_04057.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.1 mm and length at least 139.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.1 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 73.5 mm (from Z=0.0 to Z=73.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03706", "images": ["images/Shaft_03706.png", "detail_png/Shaft_03706_length.png", "detail_png/Shaft_03706_diam.png", "detail_png/Shaft_03706_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.8 mm and length at least 231.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 109.4 mm (from Z=0.0 to Z=109.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.7 mm over length 45.6 mm (from Z=0.0 to Z=117.0).\n10. Finish turn diameter Ø49.3 mm over length 71.4 mm (from Z=0.0 to Z=71.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00802", "images": ["images/Shaft_00802.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.1 mm and length at least 96.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 22.9 mm (from Z=0.0 to Z=22.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.0 mm over length 42.7 mm (from Z=0.0 to Z=68.9).\n9. Finish turn diameter Ø37.5 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03926", "images": ["images/Shaft_03926.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 310.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 203.6 mm (from Z=0.0 to Z=203.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 101.5 mm (from Z=0.0 to Z=101.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03230", "images": ["images/Shaft_03230.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.6 mm and length at least 208.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.6 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 185.3 mm (from Z=0.0 to Z=185.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04661", "images": ["images/Shaft_04661.png", "detail_png/Shaft_04661_length.png", "detail_png/Shaft_04661_diam.png", "detail_png/Shaft_04661_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.9 mm and length at least 98.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.9 mm over length 15.1 mm (from Z=0.0 to Z=15.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.4 mm over length 22.0 mm (from Z=0.0 to Z=78.1).\n9. Finish turn diameter Ø30.0 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00275", "images": ["images/Shaft_00275.png", "detail_png/Shaft_00275_length.png", "detail_png/Shaft_00275_diam.png", "detail_png/Shaft_00275_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 250.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 80.5 mm (from Z=0.0 to Z=80.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.5 mm over length 68.9 mm (from Z=0.0 to Z=164.6).\n10. Finish turn diameter Ø34.3 mm over length 44.4 mm (from Z=0.0 to Z=95.7).\n11. Finish turn diameter Ø30.1 mm over length 10.8 mm (from Z=0.0 to Z=51.3).\n12. Finish turn diameter Ø30.0 mm over length 40.5 mm (from Z=0.0 to Z=40.5).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04130", "images": ["images/Shaft_04130.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 212.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 153.1 mm (from Z=0.0 to Z=153.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.8 mm over length 54.0 mm (from Z=0.0 to Z=54.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03855", "images": ["images/Shaft_03855.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 115.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 87.1 mm (from Z=0.0 to Z=87.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.6 mm over length 23.1 mm (from Z=0.0 to Z=23.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00328", "images": ["images/Shaft_00328.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø65.8 mm and length at least 83.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.8 mm over length 22.0 mm (from Z=0.0 to Z=22.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.3 mm over length 8.0 mm (from Z=0.0 to Z=56.0).\n9. Finish turn diameter Ø47.3 mm over length 5.0 mm (from Z=0.0 to Z=48.0).\n10. Finish turn diameter Ø31.0 mm over length 31.3 mm (from Z=0.0 to Z=43.0).\n11. Finish turn diameter Ø30.0 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00362", "images": ["images/Shaft_00362.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø41.5 mm and length at least 111.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.5 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 87.7 mm (from Z=0.0 to Z=87.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03422", "images": ["images/Shaft_03422.png", "detail_png/Shaft_03422_length.png", "detail_png/Shaft_03422_diam.png", "detail_png/Shaft_03422_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.6 mm and length at least 270.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.6 mm over length 171.1 mm (from Z=0.0 to Z=171.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.8 mm over length 17.9 mm (from Z=0.0 to Z=94.4).\n10. Finish turn diameter Ø49.8 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00041", "images": ["images/Shaft_00041.png", "detail_png/Shaft_00041_length.png", "detail_png/Shaft_00041_diam.png", "detail_png/Shaft_00041_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.5 mm and length at least 122.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 25.0 mm (from Z=0.0 to Z=25.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.9 mm over length 18.4 mm (from Z=0.0 to Z=92.0).\n9. Finish turn diameter Ø30.0 mm over length 73.6 mm (from Z=0.0 to Z=73.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04925", "images": ["images/Shaft_04925.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 164.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 136.6 mm (from Z=0.0 to Z=136.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.5 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01821", "images": ["images/Shaft_01821.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.9 mm and length at least 254.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.9 mm over length 26.1 mm (from Z=0.0 to Z=26.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.3 mm over length 41.6 mm (from Z=0.0 to Z=223.6).\n10. Finish turn diameter Ø32.1 mm over length 62.2 mm (from Z=0.0 to Z=182.0).\n11. Finish turn diameter Ø30.0 mm over length 119.8 mm (from Z=0.0 to Z=119.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03557", "images": ["images/Shaft_03557.png", "detail_png/Shaft_03557_length.png", "detail_png/Shaft_03557_diam.png", "detail_png/Shaft_03557_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.5 mm and length at least 149.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 47.9 mm (from Z=0.0 to Z=100.1).\n9. Finish turn diameter Ø37.7 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04887", "images": ["images/Shaft_04887.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.0 mm and length at least 107.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.9 mm over length 28.5 mm (from Z=0.0 to Z=89.4).\n9. Finish turn diameter Ø33.2 mm over length 24.7 mm (from Z=0.0 to Z=60.9).\n10. Finish turn diameter Ø30.0 mm over length 36.2 mm (from Z=0.0 to Z=36.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02030", "images": ["images/Shaft_02030.png", "detail_png/Shaft_02030_length.png", "detail_png/Shaft_02030_diam.png", "detail_png/Shaft_02030_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.0 mm and length at least 231.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.0 mm over length 57.8 mm (from Z=0.0 to Z=57.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.9 mm (from Z=0.0 to Z=168.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02020", "images": ["images/Shaft_02020.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.0 mm and length at least 317.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.6 mm over length 16.3 mm (from Z=0.0 to Z=293.4).\n10. Finish turn diameter Ø38.1 mm over length 55.3 mm (from Z=0.0 to Z=277.1).\n11. Finish turn diameter Ø30.0 mm over length 221.8 mm (from Z=0.0 to Z=221.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03507", "images": ["images/Shaft_03507.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.4 mm and length at least 172.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.0 mm over length 58.8 mm (from Z=0.0 to Z=98.1).\n9. Finish turn diameter Ø59.7 mm over length 8.7 mm (from Z=0.0 to Z=39.3).\n10. Finish turn diameter Ø49.8 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00118", "images": ["images/Shaft_00118.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.6 mm and length at least 98.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.1 mm over length 21.8 mm (from Z=0.0 to Z=76.1).\n9. Finish turn diameter Ø44.1 mm over length 17.6 mm (from Z=0.0 to Z=54.3).\n10. Finish turn diameter Ø30.0 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02286", "images": ["images/Shaft_02286.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.5 mm and length at least 121.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.7 mm over length 46.0 mm (from Z=0.0 to Z=78.5).\n9. Finish turn diameter Ø40.0 mm over length 8.0 mm (from Z=0.0 to Z=32.5).\n10. Finish turn diameter Ø30.0 mm over length 24.5 mm (from Z=0.0 to Z=24.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03790", "images": ["images/Shaft_03790.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø37.6 mm and length at least 103.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 9.2 mm (from Z=0.0 to Z=9.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 89.3 mm (from Z=0.0 to Z=89.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03878", "images": ["images/Shaft_03878.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.6 mm and length at least 122.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.6 mm over length 42.0 mm (from Z=0.0 to Z=42.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.9 mm (from Z=0.0 to Z=75.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01773", "images": ["images/Shaft_01773.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.0 mm and length at least 280.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.4 mm over length 81.9 mm (from Z=0.0 to Z=170.9).\n10. Finish turn diameter Ø30.0 mm over length 89.0 mm (from Z=0.0 to Z=89.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04394", "images": ["images/Shaft_04394.png", "detail_png/Shaft_04394_length.png", "detail_png/Shaft_04394_diam.png", "detail_png/Shaft_04394_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.2 mm and length at least 112.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 23.7 mm (from Z=0.0 to Z=23.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.4 mm over length 20.6 mm (from Z=0.0 to Z=84.2).\n9. Finish turn diameter Ø38.1 mm over length 25.6 mm (from Z=0.0 to Z=63.6).\n10. Finish turn diameter Ø30.0 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03372", "images": ["images/Shaft_03372.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.2 mm and length at least 182.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 166.1 mm (from Z=0.0 to Z=166.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00708", "images": ["images/Shaft_00708.png", "detail_png/Shaft_00708_length.png", "detail_png/Shaft_00708_diam.png", "detail_png/Shaft_00708_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.3 mm and length at least 231.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.3 mm over length 74.9 mm (from Z=0.0 to Z=74.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 25.1 mm (from Z=0.0 to Z=151.2).\n10. Finish turn diameter Ø30.0 mm over length 126.1 mm (from Z=0.0 to Z=126.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01881", "images": ["images/Shaft_01881.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 181.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.7 mm over length 72.3 mm (from Z=0.0 to Z=72.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01392", "images": ["images/Shaft_01392.png", "detail_png/Shaft_01392_length.png", "detail_png/Shaft_01392_diam.png", "detail_png/Shaft_01392_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.1 mm and length at least 204.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 54.4 mm (from Z=0.0 to Z=54.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 36.7 mm (from Z=0.0 to Z=145.4).\n10. Finish turn diameter Ø30.0 mm over length 108.7 mm (from Z=0.0 to Z=108.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01284", "images": ["images/Shaft_01284.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.8 mm and length at least 179.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.8 mm over length 26.2 mm (from Z=0.0 to Z=26.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.0 mm over length 48.1 mm (from Z=0.0 to Z=147.8).\n9. Finish turn diameter Ø37.2 mm over length 16.3 mm (from Z=0.0 to Z=99.7).\n10. Finish turn diameter Ø30.0 mm over length 83.4 mm (from Z=0.0 to Z=83.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02417", "images": ["images/Shaft_02417.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.1 mm and length at least 123.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.1 mm over length 43.0 mm (from Z=0.0 to Z=43.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.9 mm over length 54.8 mm (from Z=0.0 to Z=75.1).\n9. Finish turn diameter Ø30.0 mm over length 20.3 mm (from Z=0.0 to Z=20.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01801", "images": ["images/Shaft_01801.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.1 mm and length at least 94.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.7 mm over length 30.8 mm (from Z=0.0 to Z=64.7).\n9. Finish turn diameter Ø62.2 mm over length 22.7 mm (from Z=0.0 to Z=33.9).\n10. Finish turn diameter Ø54.2 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04620", "images": ["images/Shaft_04620.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.5 mm and length at least 198.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.5 mm over length 87.7 mm (from Z=0.0 to Z=87.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.7 mm over length 65.1 mm (from Z=0.0 to Z=105.4).\n10. Finish turn diameter Ø44.5 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01402", "images": ["images/Shaft_01402.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.8 mm and length at least 317.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 256.2 mm (from Z=0.0 to Z=256.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03426", "images": ["images/Shaft_03426.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.3 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 50.9 mm (from Z=0.0 to Z=50.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 52.9 mm (from Z=0.0 to Z=182.3).\n10. Finish turn diameter Ø55.1 mm over length 33.8 mm (from Z=0.0 to Z=129.4).\n11. Finish turn diameter Ø40.1 mm over length 45.8 mm (from Z=0.0 to Z=95.6).\n12. Finish turn diameter Ø30.0 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03756", "images": ["images/Shaft_03756.png", "detail_png/Shaft_03756_length.png", "detail_png/Shaft_03756_diam.png", "detail_png/Shaft_03756_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø39.2 mm and length at least 92.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.2 mm over length 21.4 mm (from Z=0.0 to Z=21.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 66.5 mm (from Z=0.0 to Z=66.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03813", "images": ["images/Shaft_03813.png", "detail_png/Shaft_03813_length.png", "detail_png/Shaft_03813_diam.png", "detail_png/Shaft_03813_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.9 mm and length at least 66.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 8.8 mm (from Z=0.0 to Z=8.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 52.2 mm (from Z=0.0 to Z=52.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00910", "images": ["images/Shaft_00910.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.3 mm and length at least 247.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 229.2 mm (from Z=0.0 to Z=229.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01118", "images": ["images/Shaft_01118.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 70.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.7 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02298", "images": ["images/Shaft_02298.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.2 mm and length at least 280.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.2 mm over length 126.2 mm (from Z=0.0 to Z=126.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.0 mm over length 60.1 mm (from Z=0.0 to Z=148.9).\n10. Finish turn diameter Ø30.0 mm over length 88.8 mm (from Z=0.0 to Z=88.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00488", "images": ["images/Shaft_00488.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.7 mm and length at least 251.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.7 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 28.9 mm (from Z=0.0 to Z=183.9).\n10. Finish turn diameter Ø30.0 mm over length 155.0 mm (from Z=0.0 to Z=155.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00262", "images": ["images/Shaft_00262.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.6 mm and length at least 111.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.6 mm over length 46.7 mm (from Z=0.0 to Z=46.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.9 mm (from Z=0.0 to Z=59.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01042", "images": ["images/Shaft_01042.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø66.0 mm and length at least 178.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 16.6 mm (from Z=0.0 to Z=16.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 92.0 mm (from Z=0.0 to Z=157.1).\n9. Finish turn diameter Ø43.8 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02751", "images": ["images/Shaft_02751.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 142.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 120.9 mm (from Z=0.0 to Z=120.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 16.9 mm (from Z=0.0 to Z=16.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01656", "images": ["images/Shaft_01656.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.7 mm and length at least 109.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.7 mm over length 26.6 mm (from Z=0.0 to Z=26.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.0 mm over length 22.5 mm (from Z=0.0 to Z=77.6).\n9. Finish turn diameter Ø33.2 mm over length 31.6 mm (from Z=0.0 to Z=55.1).\n10. Finish turn diameter Ø30.0 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02209", "images": ["images/Shaft_02209.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 71.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 43.7 mm (from Z=0.0 to Z=43.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.7 mm over length 22.7 mm (from Z=0.0 to Z=22.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02937", "images": ["images/Shaft_02937.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.2 mm and length at least 299.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.4 mm over length 75.8 mm (from Z=0.0 to Z=217.5).\n10. Finish turn diameter Ø57.2 mm over length 22.8 mm (from Z=0.0 to Z=141.7).\n11. Finish turn diameter Ø38.0 mm over length 57.6 mm (from Z=0.0 to Z=118.9).\n12. Finish turn diameter Ø30.0 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01590", "images": ["images/Shaft_01590.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.4 mm and length at least 247.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 88.2 mm (from Z=0.0 to Z=88.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.1 mm over length 58.3 mm (from Z=0.0 to Z=154.7).\n10. Finish turn diameter Ø50.1 mm over length 96.4 mm (from Z=0.0 to Z=96.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03749", "images": ["images/Shaft_03749.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.1 mm and length at least 262.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 235.6 mm (from Z=0.0 to Z=235.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01117", "images": ["images/Shaft_01117.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.0 mm and length at least 148.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 37.0 mm (from Z=0.0 to Z=37.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 25.7 mm (from Z=0.0 to Z=106.1).\n9. Finish turn diameter Ø56.8 mm over length 18.1 mm (from Z=0.0 to Z=80.4).\n10. Finish turn diameter Ø53.5 mm over length 42.1 mm (from Z=0.0 to Z=62.3).\n11. Finish turn diameter Ø36.3 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03059", "images": ["images/Shaft_03059.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 112.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 63.3 mm (from Z=0.0 to Z=63.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.0 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03173", "images": ["images/Shaft_03173.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.9 mm and length at least 133.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.0 mm over length 9.3 mm (from Z=0.0 to Z=98.9).\n9. Finish turn diameter Ø49.9 mm over length 34.2 mm (from Z=0.0 to Z=89.6).\n10. Finish turn diameter Ø39.4 mm over length 6.6 mm (from Z=0.0 to Z=55.4).\n11. Finish turn diameter Ø30.0 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01458", "images": ["images/Shaft_01458.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø69.9 mm and length at least 316.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 172.5 mm (from Z=0.0 to Z=172.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 40.7 mm (from Z=0.0 to Z=138.8).\n10. Finish turn diameter Ø45.8 mm over length 73.0 mm (from Z=0.0 to Z=98.1).\n11. Finish turn diameter Ø41.3 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03727", "images": ["images/Shaft_03727.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.9 mm and length at least 188.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 83.5 mm (from Z=0.0 to Z=83.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.5 mm (from Z=0.0 to Z=99.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04907", "images": ["images/Shaft_04907.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø49.3 mm and length at least 324.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.3 mm over length 47.8 mm (from Z=0.0 to Z=47.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 127.2 mm (from Z=0.0 to Z=271.2).\n10. Finish turn diameter Ø30.0 mm over length 144.0 mm (from Z=0.0 to Z=144.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01187", "images": ["images/Shaft_01187.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.5 mm and length at least 130.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.5 mm over length 8.6 mm (from Z=0.0 to Z=93.7).\n9. Finish turn diameter Ø58.8 mm over length 38.4 mm (from Z=0.0 to Z=85.1).\n10. Finish turn diameter Ø41.1 mm over length 33.6 mm (from Z=0.0 to Z=46.7).\n11. Finish turn diameter Ø30.0 mm over length 13.1 mm (from Z=0.0 to Z=13.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03570", "images": ["images/Shaft_03570.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø57.5 mm and length at least 190.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.5 mm over length 35.7 mm (from Z=0.0 to Z=35.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.9 mm over length 18.0 mm (from Z=0.0 to Z=149.7).\n9. Finish turn diameter Ø36.5 mm over length 50.7 mm (from Z=0.0 to Z=131.7).\n10. Finish turn diameter Ø30.0 mm over length 81.0 mm (from Z=0.0 to Z=81.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04561", "images": ["images/Shaft_04561.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.1 mm and length at least 174.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.5 mm over length 18.9 mm (from Z=0.0 to Z=120.4).\n9. Finish turn diameter Ø47.9 mm over length 52.2 mm (from Z=0.0 to Z=101.5).\n10. Finish turn diameter Ø38.9 mm over length 49.3 mm (from Z=0.0 to Z=49.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03968", "images": ["images/Shaft_03968.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.6 mm and length at least 293.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 64.9 mm (from Z=0.0 to Z=64.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 223.7 mm (from Z=0.0 to Z=223.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03858", "images": ["images/Shaft_03858.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.4 mm and length at least 122.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.4 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 104.5 mm (from Z=0.0 to Z=104.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00602", "images": ["images/Shaft_00602.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.7 mm and length at least 266.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.7 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 209.8 mm (from Z=0.0 to Z=209.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01807", "images": ["images/Shaft_01807.png", "detail_png/Shaft_01807_length.png", "detail_png/Shaft_01807_diam.png", "detail_png/Shaft_01807_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.0 mm and length at least 114.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.0 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.3 mm over length 38.6 mm (from Z=0.0 to Z=98.4).\n9. Finish turn diameter Ø30.0 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03076", "images": ["images/Shaft_03076.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.4 mm and length at least 220.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 164.8 mm (from Z=0.0 to Z=164.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01638", "images": ["images/Shaft_01638.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø52.1 mm and length at least 139.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.8 mm over length 46.0 mm (from Z=0.0 to Z=96.4).\n9. Finish turn diameter Ø30.0 mm over length 50.4 mm (from Z=0.0 to Z=50.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03379", "images": ["images/Shaft_03379.png", "detail_png/Shaft_03379_length.png", "detail_png/Shaft_03379_diam.png", "detail_png/Shaft_03379_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø61.0 mm and length at least 247.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.0 mm over length 141.5 mm (from Z=0.0 to Z=141.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.0 mm over length 88.4 mm (from Z=0.0 to Z=100.6).\n10. Finish turn diameter Ø35.8 mm over length 12.2 mm (from Z=0.0 to Z=12.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01942", "images": ["images/Shaft_01942.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.8 mm and length at least 81.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 7.8 mm (from Z=0.0 to Z=7.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 68.8 mm (from Z=0.0 to Z=68.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00803", "images": ["images/Shaft_00803.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.0 mm and length at least 145.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.0 mm over length 41.1 mm (from Z=0.0 to Z=41.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.4 mm over length 57.9 mm (from Z=0.0 to Z=99.7).\n9. Finish turn diameter Ø30.0 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01865", "images": ["images/Shaft_01865.png", "detail_png/Shaft_01865_length.png", "detail_png/Shaft_01865_diam.png", "detail_png/Shaft_01865_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.8 mm and length at least 249.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.8 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.6 mm over length 51.9 mm (from Z=0.0 to Z=220.9).\n10. Finish turn diameter Ø51.3 mm over length 57.1 mm (from Z=0.0 to Z=169.0).\n11. Finish turn diameter Ø33.5 mm over length 55.1 mm (from Z=0.0 to Z=111.9).\n12. Finish turn diameter Ø30.0 mm over length 56.8 mm (from Z=0.0 to Z=56.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02671", "images": ["images/Shaft_02671.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø58.2 mm and length at least 91.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.2 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.4 mm over length 8.0 mm (from Z=0.0 to Z=69.6).\n9. Finish turn diameter Ø46.7 mm over length 12.4 mm (from Z=0.0 to Z=61.6).\n10. Finish turn diameter Ø34.5 mm over length 21.2 mm (from Z=0.0 to Z=49.2).\n11. Finish turn diameter Ø30.0 mm over length 28.0 mm (from Z=0.0 to Z=28.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00902", "images": ["images/Shaft_00902.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.7 mm and length at least 137.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.7 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 103.6 mm (from Z=0.0 to Z=103.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01884", "images": ["images/Shaft_01884.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.2 mm and length at least 189.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 18.8 mm (from Z=0.0 to Z=18.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.4 mm over length 47.9 mm (from Z=0.0 to Z=165.8).\n10. Finish turn diameter Ø30.0 mm over length 117.9 mm (from Z=0.0 to Z=117.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02668", "images": ["images/Shaft_02668.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 265.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 236.4 mm (from Z=0.0 to Z=236.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.4 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01628", "images": ["images/Shaft_01628.png", "detail_png/Shaft_01628_length.png", "detail_png/Shaft_01628_diam.png", "detail_png/Shaft_01628_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.2 mm and length at least 186.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.2 mm over length 25.3 mm (from Z=0.0 to Z=25.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.9 mm over length 45.7 mm (from Z=0.0 to Z=155.8).\n9. Finish turn diameter Ø32.3 mm over length 28.6 mm (from Z=0.0 to Z=110.1).\n10. Finish turn diameter Ø30.0 mm over length 81.5 mm (from Z=0.0 to Z=81.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03432", "images": ["images/Shaft_03432.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.1 mm and length at least 212.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.1 mm over length 155.1 mm (from Z=0.0 to Z=155.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.5 mm over length 35.1 mm (from Z=0.0 to Z=52.4).\n10. Finish turn diameter Ø35.2 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02670", "images": ["images/Shaft_02670.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.9 mm and length at least 190.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 136.5 mm (from Z=0.0 to Z=136.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03643", "images": ["images/Shaft_03643.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.8 mm and length at least 167.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 37.7 mm (from Z=0.0 to Z=37.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.8 mm over length 77.9 mm (from Z=0.0 to Z=125.2).\n9. Finish turn diameter Ø32.8 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04694", "images": ["images/Shaft_04694.png", "detail_png/Shaft_04694_length.png", "detail_png/Shaft_04694_diam.png", "detail_png/Shaft_04694_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø81.4 mm and length at least 96.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.4 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.3 mm over length 21.3 mm (from Z=0.0 to Z=36.5).\n9. Finish turn diameter Ø60.6 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00580", "images": ["images/Shaft_00580.png", "detail_png/Shaft_00580_length.png", "detail_png/Shaft_00580_diam.png", "detail_png/Shaft_00580_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.6 mm and length at least 246.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 54.3 mm (from Z=0.0 to Z=208.6).\n10. Finish turn diameter Ø30.0 mm over length 154.3 mm (from Z=0.0 to Z=154.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04559", "images": ["images/Shaft_04559.png", "detail_png/Shaft_04559_length.png", "detail_png/Shaft_04559_diam.png", "detail_png/Shaft_04559_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.9 mm and length at least 281.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.9 mm over length 130.9 mm (from Z=0.0 to Z=130.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.9 mm over length 54.7 mm (from Z=0.0 to Z=145.2).\n10. Finish turn diameter Ø30.0 mm over length 90.5 mm (from Z=0.0 to Z=90.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04218", "images": ["images/Shaft_04218.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 170.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 98.5 mm (from Z=0.0 to Z=98.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.5 mm over length 67.1 mm (from Z=0.0 to Z=67.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03973", "images": ["images/Shaft_03973.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.9 mm and length at least 114.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 33.2 mm (from Z=0.0 to Z=33.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.1 mm over length 15.2 mm (from Z=0.0 to Z=76.0).\n9. Finish turn diameter Ø30.0 mm over length 60.8 mm (from Z=0.0 to Z=60.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04959", "images": ["images/Shaft_04959.png", "detail_png/Shaft_04959_length.png", "detail_png/Shaft_04959_diam.png", "detail_png/Shaft_04959_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.7 mm and length at least 200.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.7 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.8 mm over length 29.0 mm (from Z=0.0 to Z=150.3).\n10. Finish turn diameter Ø30.0 mm over length 121.3 mm (from Z=0.0 to Z=121.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01294", "images": ["images/Shaft_01294.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 244.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.4 mm (from Z=0.0 to Z=168.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.1 mm over length 71.0 mm (from Z=0.0 to Z=71.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01440", "images": ["images/Shaft_01440.png", "detail_png/Shaft_01440_length.png", "detail_png/Shaft_01440_diam.png", "detail_png/Shaft_01440_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.1 mm and length at least 88.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.0 mm over length 16.2 mm (from Z=0.0 to Z=69.5).\n9. Finish turn diameter Ø30.0 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00429", "images": ["images/Shaft_00429.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.5 mm and length at least 275.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 66.7 mm (from Z=0.0 to Z=66.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.2 mm over length 54.2 mm (from Z=0.0 to Z=203.6).\n10. Finish turn diameter Ø49.4 mm over length 73.9 mm (from Z=0.0 to Z=149.4).\n11. Finish turn diameter Ø36.3 mm over length 38.9 mm (from Z=0.0 to Z=75.5).\n12. Finish turn diameter Ø30.0 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00855", "images": ["images/Shaft_00855.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.7 mm and length at least 111.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.7 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø43.0 mm over length 29.7 mm (from Z=0.0 to Z=95.4).\n9. Finish turn diameter Ø34.6 mm over length 5.0 mm (from Z=0.0 to Z=65.7).\n10. Finish turn diameter Ø30.0 mm over length 60.7 mm (from Z=0.0 to Z=60.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00354", "images": ["images/Shaft_00354.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.3 mm and length at least 299.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.3 mm over length 127.1 mm (from Z=0.0 to Z=127.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 167.0 mm (from Z=0.0 to Z=167.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03712", "images": ["images/Shaft_03712.png", "detail_png/Shaft_03712_length.png", "detail_png/Shaft_03712_diam.png", "detail_png/Shaft_03712_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 235.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 201.7 mm (from Z=0.0 to Z=201.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 28.3 mm (from Z=0.0 to Z=28.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02738", "images": ["images/Shaft_02738.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø77.7 mm and length at least 282.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.8 mm over length 186.4 mm (from Z=0.0 to Z=251.2).\n10. Finish turn diameter Ø50.3 mm over length 64.8 mm (from Z=0.0 to Z=64.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02059", "images": ["images/Shaft_02059.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.6 mm and length at least 188.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.6 mm over length 31.2 mm (from Z=0.0 to Z=163.3).\n10. Finish turn diameter Ø30.0 mm over length 132.1 mm (from Z=0.0 to Z=132.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03560", "images": ["images/Shaft_03560.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø79.8 mm and length at least 181.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø73.1 mm over length 39.8 mm (from Z=0.0 to Z=131.6).\n9. Finish turn diameter Ø57.6 mm over length 7.6 mm (from Z=0.0 to Z=91.8).\n10. Finish turn diameter Ø45.9 mm over length 9.0 mm (from Z=0.0 to Z=84.2).\n11. Finish turn diameter Ø30.0 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01716", "images": ["images/Shaft_01716.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø38.1 mm and length at least 112.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 77.6 mm (from Z=0.0 to Z=77.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02335", "images": ["images/Shaft_02335.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.9 mm and length at least 239.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 94.1 mm (from Z=0.0 to Z=94.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.4 mm over length 29.4 mm (from Z=0.0 to Z=140.5).\n10. Finish turn diameter Ø33.3 mm over length 93.5 mm (from Z=0.0 to Z=111.1).\n11. Finish turn diameter Ø30.0 mm over length 17.6 mm (from Z=0.0 to Z=17.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02983", "images": ["images/Shaft_02983.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø81.9 mm and length at least 194.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.2 mm over length 32.4 mm (from Z=0.0 to Z=176.1).\n9. Finish turn diameter Ø45.4 mm over length 82.4 mm (from Z=0.0 to Z=143.7).\n10. Finish turn diameter Ø37.1 mm over length 61.3 mm (from Z=0.0 to Z=61.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00442", "images": ["images/Shaft_00442.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.8 mm and length at least 125.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø74.6 mm over length 42.7 mm (from Z=0.0 to Z=89.6).\n9. Finish turn diameter Ø58.6 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00353", "images": ["images/Shaft_00353.png", "detail_png/Shaft_00353_length.png", "detail_png/Shaft_00353_diam.png", "detail_png/Shaft_00353_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.4 mm and length at least 164.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.4 mm over length 54.9 mm (from Z=0.0 to Z=54.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.1 mm over length 82.4 mm (from Z=0.0 to Z=104.9).\n9. Finish turn diameter Ø30.0 mm over length 22.5 mm (from Z=0.0 to Z=22.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01308", "images": ["images/Shaft_01308.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.9 mm and length at least 205.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.9 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.0 mm over length 44.5 mm (from Z=0.0 to Z=181.1).\n10. Finish turn diameter Ø57.1 mm over length 14.2 mm (from Z=0.0 to Z=136.6).\n11. Finish turn diameter Ø51.9 mm over length 32.0 mm (from Z=0.0 to Z=122.4).\n12. Finish turn diameter Ø32.9 mm over length 34.2 mm (from Z=0.0 to Z=90.4).\n13. Finish turn diameter Ø30.0 mm over length 56.2 mm (from Z=0.0 to Z=56.2).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01444", "images": ["images/Shaft_01444.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 304.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 284.5 mm (from Z=0.0 to Z=284.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 14.9 mm (from Z=0.0 to Z=14.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04075", "images": ["images/Shaft_04075.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.0 mm and length at least 207.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.5 mm over length 46.4 mm (from Z=0.0 to Z=161.5).\n10. Finish turn diameter Ø30.0 mm over length 115.1 mm (from Z=0.0 to Z=115.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03886", "images": ["images/Shaft_03886.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.3 mm and length at least 113.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 11.1 mm (from Z=0.0 to Z=11.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.3 mm over length 52.4 mm (from Z=0.0 to Z=96.9).\n9. Finish turn diameter Ø47.6 mm over length 44.5 mm (from Z=0.0 to Z=44.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04724", "images": ["images/Shaft_04724.png", "detail_png/Shaft_04724_length.png", "detail_png/Shaft_04724_diam.png", "detail_png/Shaft_04724_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.2 mm and length at least 251.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 26.0 mm (from Z=0.0 to Z=26.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 58.4 mm (from Z=0.0 to Z=220.6).\n10. Finish turn diameter Ø51.0 mm over length 73.2 mm (from Z=0.0 to Z=162.2).\n11. Finish turn diameter Ø45.5 mm over length 58.8 mm (from Z=0.0 to Z=89.0).\n12. Finish turn diameter Ø34.6 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00923", "images": ["images/Shaft_00923.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.9 mm and length at least 97.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.9 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.9 mm over length 18.5 mm (from Z=0.0 to Z=53.7).\n9. Finish turn diameter Ø54.7 mm over length 9.7 mm (from Z=0.0 to Z=35.2).\n10. Finish turn diameter Ø42.6 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01586", "images": ["images/Shaft_01586.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.0 mm and length at least 93.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.0 mm over length 19.0 mm (from Z=0.0 to Z=19.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø35.7 mm over length 17.4 mm (from Z=0.0 to Z=69.2).\n9. Finish turn diameter Ø30.0 mm over length 51.8 mm (from Z=0.0 to Z=51.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00434", "images": ["images/Shaft_00434.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.1 mm and length at least 163.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.2 mm over length 5.0 mm (from Z=0.0 to Z=123.2).\n9. Finish turn diameter Ø45.1 mm over length 21.3 mm (from Z=0.0 to Z=118.2).\n10. Finish turn diameter Ø33.6 mm over length 40.9 mm (from Z=0.0 to Z=96.9).\n11. Finish turn diameter Ø30.0 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04484", "images": ["images/Shaft_04484.png", "detail_png/Shaft_04484_length.png", "detail_png/Shaft_04484_diam.png", "detail_png/Shaft_04484_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø42.9 mm and length at least 324.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 127.7 mm (from Z=0.0 to Z=127.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 192.0 mm (from Z=0.0 to Z=192.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01704", "images": ["images/Shaft_01704.png", "detail_png/Shaft_01704_length.png", "detail_png/Shaft_01704_diam.png", "detail_png/Shaft_01704_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø54.0 mm and length at least 221.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.3 mm over length 102.2 mm (from Z=0.0 to Z=185.2).\n10. Finish turn diameter Ø30.0 mm over length 83.0 mm (from Z=0.0 to Z=83.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03802", "images": ["images/Shaft_03802.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.2 mm and length at least 268.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.2 mm over length 93.3 mm (from Z=0.0 to Z=93.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 94.7 mm (from Z=0.0 to Z=170.6).\n10. Finish turn diameter Ø30.0 mm over length 75.9 mm (from Z=0.0 to Z=75.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01796", "images": ["images/Shaft_01796.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.5 mm and length at least 113.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø53.8 mm over length 34.5 mm (from Z=0.0 to Z=87.4).\n9. Finish turn diameter Ø50.3 mm over length 6.7 mm (from Z=0.0 to Z=52.9).\n10. Finish turn diameter Ø44.5 mm over length 13.7 mm (from Z=0.0 to Z=46.2).\n11. Finish turn diameter Ø34.2 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04157", "images": ["images/Shaft_04157.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.1 mm and length at least 224.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.1 mm over length 29.2 mm (from Z=0.0 to Z=29.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 190.3 mm (from Z=0.0 to Z=190.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02964", "images": ["images/Shaft_02964.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø79.1 mm and length at least 83.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.1 mm over length 5.0 mm (from Z=0.0 to Z=64.8).\n9. Finish turn diameter Ø51.3 mm over length 20.4 mm (from Z=0.0 to Z=59.8).\n10. Finish turn diameter Ø43.2 mm over length 14.1 mm (from Z=0.0 to Z=39.4).\n11. Finish turn diameter Ø35.2 mm over length 20.3 mm (from Z=0.0 to Z=25.3).\n12. Finish turn diameter Ø30.0 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00783", "images": ["images/Shaft_00783.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø62.1 mm and length at least 271.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 39.7 mm (from Z=0.0 to Z=39.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.7 mm over length 49.1 mm (from Z=0.0 to Z=226.4).\n10. Finish turn diameter Ø42.0 mm over length 36.5 mm (from Z=0.0 to Z=177.3).\n11. Finish turn diameter Ø35.5 mm over length 64.7 mm (from Z=0.0 to Z=140.8).\n12. Finish turn diameter Ø30.0 mm over length 76.1 mm (from Z=0.0 to Z=76.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00962", "images": ["images/Shaft_00962.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.3 mm and length at least 265.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 60.1 mm (from Z=0.0 to Z=60.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 199.9 mm (from Z=0.0 to Z=199.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01572", "images": ["images/Shaft_01572.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø55.7 mm and length at least 323.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 84.8 mm (from Z=0.0 to Z=239.7).\n10. Finish turn diameter Ø30.0 mm over length 154.9 mm (from Z=0.0 to Z=154.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01930", "images": ["images/Shaft_01930.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.5 mm and length at least 225.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.5 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.5 mm over length 66.0 mm (from Z=0.0 to Z=140.7).\n10. Finish turn diameter Ø43.8 mm over length 74.7 mm (from Z=0.0 to Z=74.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00037", "images": ["images/Shaft_00037.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.9 mm and length at least 205.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 157.4 mm (from Z=0.0 to Z=157.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03430", "images": ["images/Shaft_03430.png", "detail_png/Shaft_03430_length.png", "detail_png/Shaft_03430_diam.png", "detail_png/Shaft_03430_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.0 mm and length at least 291.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.0 mm over length 36.7 mm (from Z=0.0 to Z=36.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.3 mm over length 47.4 mm (from Z=0.0 to Z=249.6).\n10. Finish turn diameter Ø56.4 mm over length 32.9 mm (from Z=0.0 to Z=202.2).\n11. Finish turn diameter Ø37.0 mm over length 30.1 mm (from Z=0.0 to Z=169.3).\n12. Finish turn diameter Ø30.0 mm over length 139.2 mm (from Z=0.0 to Z=139.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02849", "images": ["images/Shaft_02849.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.2 mm and length at least 299.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.2 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.9 mm over length 90.5 mm (from Z=0.0 to Z=231.3).\n10. Finish turn diameter Ø33.7 mm over length 32.4 mm (from Z=0.0 to Z=140.8).\n11. Finish turn diameter Ø30.0 mm over length 108.4 mm (from Z=0.0 to Z=108.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02467", "images": ["images/Shaft_02467.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 283.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 257.9 mm (from Z=0.0 to Z=257.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.7 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00721", "images": ["images/Shaft_00721.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 279.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 217.9 mm (from Z=0.0 to Z=217.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.4 mm over length 56.6 mm (from Z=0.0 to Z=56.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04095", "images": ["images/Shaft_04095.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø74.7 mm and length at least 110.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.7 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.5 mm over length 21.8 mm (from Z=0.0 to Z=82.2).\n9. Finish turn diameter Ø48.9 mm over length 25.6 mm (from Z=0.0 to Z=60.4).\n10. Finish turn diameter Ø30.5 mm over length 5.0 mm (from Z=0.0 to Z=34.8).\n11. Finish turn diameter Ø30.0 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01474", "images": ["images/Shaft_01474.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.0 mm and length at least 106.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.0 mm over length 45.0 mm (from Z=0.0 to Z=45.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.1 mm over length 28.9 mm (from Z=0.0 to Z=56.1).\n9. Finish turn diameter Ø54.8 mm over length 20.7 mm (from Z=0.0 to Z=27.2).\n10. Finish turn diameter Ø50.3 mm over length 6.5 mm (from Z=0.0 to Z=6.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00308", "images": ["images/Shaft_00308.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.7 mm and length at least 128.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.0 mm over length 17.8 mm (from Z=0.0 to Z=105.5).\n9. Finish turn diameter Ø39.8 mm over length 40.1 mm (from Z=0.0 to Z=87.7).\n10. Finish turn diameter Ø36.6 mm over length 16.5 mm (from Z=0.0 to Z=47.6).\n11. Finish turn diameter Ø30.0 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01429", "images": ["images/Shaft_01429.png", "detail_png/Shaft_01429_length.png", "detail_png/Shaft_01429_diam.png", "detail_png/Shaft_01429_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.2 mm and length at least 121.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.2 mm over length 38.7 mm (from Z=0.0 to Z=38.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.3 mm over length 53.5 mm (from Z=0.0 to Z=77.7).\n9. Finish turn diameter Ø31.3 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01959", "images": ["images/Shaft_01959.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.9 mm and length at least 247.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 106.6 mm (from Z=0.0 to Z=106.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 80.4 mm (from Z=0.0 to Z=135.6).\n10. Finish turn diameter Ø30.0 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03375", "images": ["images/Shaft_03375.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø37.8 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.8 mm over length 101.4 mm (from Z=0.0 to Z=101.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 137.5 mm (from Z=0.0 to Z=137.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03689", "images": ["images/Shaft_03689.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.5 mm and length at least 271.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.5 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.4 mm over length 102.0 mm (from Z=0.0 to Z=209.9).\n10. Finish turn diameter Ø61.7 mm over length 48.9 mm (from Z=0.0 to Z=107.9).\n11. Finish turn diameter Ø51.5 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04378", "images": ["images/Shaft_04378.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø59.1 mm and length at least 187.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.1 mm over length 109.5 mm (from Z=0.0 to Z=109.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.0 mm over length 50.4 mm (from Z=0.0 to Z=73.4).\n9. Finish turn diameter Ø30.0 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02219", "images": ["images/Shaft_02219.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.6 mm and length at least 153.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 63.1 mm (from Z=0.0 to Z=63.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.5 mm over length 36.5 mm (from Z=0.0 to Z=85.5).\n9. Finish turn diameter Ø30.0 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01172", "images": ["images/Shaft_01172.png", "detail_png/Shaft_01172_length.png", "detail_png/Shaft_01172_diam.png", "detail_png/Shaft_01172_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.5 mm and length at least 285.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 14.5 mm (from Z=0.0 to Z=14.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 266.1 mm (from Z=0.0 to Z=266.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01688", "images": ["images/Shaft_01688.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.6 mm and length at least 314.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.6 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.9 mm over length 72.7 mm (from Z=0.0 to Z=250.0).\n10. Finish turn diameter Ø30.0 mm over length 177.3 mm (from Z=0.0 to Z=177.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01039", "images": ["images/Shaft_01039.png", "detail_png/Shaft_01039_length.png", "detail_png/Shaft_01039_diam.png", "detail_png/Shaft_01039_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 132.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 54.6 mm (from Z=0.0 to Z=54.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.6 mm over length 16.0 mm (from Z=0.0 to Z=73.3).\n9. Finish turn diameter Ø30.0 mm over length 57.3 mm (from Z=0.0 to Z=57.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03899", "images": ["images/Shaft_03899.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø48.6 mm and length at least 149.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.6 mm over length 26.4 mm (from Z=0.0 to Z=26.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø39.8 mm over length 7.0 mm (from Z=0.0 to Z=117.9).\n10. Finish turn diameter Ø30.0 mm over length 110.9 mm (from Z=0.0 to Z=110.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03409", "images": ["images/Shaft_03409.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.1 mm and length at least 147.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.1 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.4 mm over length 8.5 mm (from Z=0.0 to Z=102.9).\n10. Finish turn diameter Ø30.0 mm over length 94.4 mm (from Z=0.0 to Z=94.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02324", "images": ["images/Shaft_02324.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.8 mm and length at least 252.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.8 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 38.5 mm (from Z=0.0 to Z=184.9).\n10. Finish turn diameter Ø58.2 mm over length 54.5 mm (from Z=0.0 to Z=146.4).\n11. Finish turn diameter Ø47.6 mm over length 71.3 mm (from Z=0.0 to Z=91.9).\n12. Finish turn diameter Ø32.1 mm over length 20.6 mm (from Z=0.0 to Z=20.6).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00730", "images": ["images/Shaft_00730.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.7 mm and length at least 270.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.7 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.5 mm over length 13.7 mm (from Z=0.0 to Z=195.3).\n10. Finish turn diameter Ø42.1 mm over length 50.6 mm (from Z=0.0 to Z=181.6).\n11. Finish turn diameter Ø32.4 mm over length 85.6 mm (from Z=0.0 to Z=131.0).\n12. Finish turn diameter Ø30.0 mm over length 45.4 mm (from Z=0.0 to Z=45.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01469", "images": ["images/Shaft_01469.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø77.2 mm and length at least 166.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.2 mm over length 57.7 mm (from Z=0.0 to Z=57.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.6 mm over length 82.9 mm (from Z=0.0 to Z=104.1).\n9. Finish turn diameter Ø59.6 mm over length 21.2 mm (from Z=0.0 to Z=21.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00059", "images": ["images/Shaft_00059.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.4 mm and length at least 246.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 106.6 mm (from Z=0.0 to Z=106.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.6 mm over length 101.3 mm (from Z=0.0 to Z=135.1).\n10. Finish turn diameter Ø33.8 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00052", "images": ["images/Shaft_00052.png", "detail_png/Shaft_00052_length.png", "detail_png/Shaft_00052_diam.png", "detail_png/Shaft_00052_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.1 mm and length at least 279.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.1 mm over length 30.7 mm (from Z=0.0 to Z=30.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.0 mm over length 48.9 mm (from Z=0.0 to Z=243.9).\n10. Finish turn diameter Ø30.0 mm over length 195.0 mm (from Z=0.0 to Z=195.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00661", "images": ["images/Shaft_00661.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.4 mm and length at least 84.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.4 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.2 mm over length 23.0 mm (from Z=0.0 to Z=74.3).\n9. Finish turn diameter Ø52.4 mm over length 21.2 mm (from Z=0.0 to Z=51.3).\n10. Finish turn diameter Ø45.1 mm over length 15.4 mm (from Z=0.0 to Z=30.1).\n11. Finish turn diameter Ø31.6 mm over length 5.7 mm (from Z=0.0 to Z=14.7).\n12. Finish turn diameter Ø30.0 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03989", "images": ["images/Shaft_03989.png", "detail_png/Shaft_03989_length.png", "detail_png/Shaft_03989_diam.png", "detail_png/Shaft_03989_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.5 mm and length at least 139.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.3 mm over length 31.5 mm (from Z=0.0 to Z=100.8).\n9. Finish turn diameter Ø30.2 mm over length 5.0 mm (from Z=0.0 to Z=69.3).\n10. Finish turn diameter Ø30.0 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04670", "images": ["images/Shaft_04670.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.7 mm and length at least 162.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.7 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.9 mm over length 8.5 mm (from Z=0.0 to Z=137.0).\n9. Finish turn diameter Ø64.5 mm over length 11.7 mm (from Z=0.0 to Z=128.5).\n10. Finish turn diameter Ø44.6 mm over length 30.4 mm (from Z=0.0 to Z=116.8).\n11. Finish turn diameter Ø30.0 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01292", "images": ["images/Shaft_01292.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø46.6 mm and length at least 261.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.6 mm over length 47.1 mm (from Z=0.0 to Z=47.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.3 mm over length 85.5 mm (from Z=0.0 to Z=209.1).\n10. Finish turn diameter Ø33.4 mm over length 76.0 mm (from Z=0.0 to Z=123.6).\n11. Finish turn diameter Ø30.0 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03081", "images": ["images/Shaft_03081.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø57.6 mm and length at least 285.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.6 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.5 mm over length 43.4 mm (from Z=0.0 to Z=239.0).\n10. Finish turn diameter Ø30.5 mm over length 53.0 mm (from Z=0.0 to Z=195.6).\n11. Finish turn diameter Ø30.0 mm over length 142.6 mm (from Z=0.0 to Z=142.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00818", "images": ["images/Shaft_00818.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.2 mm and length at least 105.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.2 mm over length 19.4 mm (from Z=0.0 to Z=19.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.8 mm over length 21.9 mm (from Z=0.0 to Z=80.7).\n9. Finish turn diameter Ø30.0 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01092", "images": ["images/Shaft_01092.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø33.7 mm and length at least 104.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.7 mm over length 17.7 mm (from Z=0.0 to Z=17.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 82.2 mm (from Z=0.0 to Z=82.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00333", "images": ["images/Shaft_00333.png", "detail_png/Shaft_00333_length.png", "detail_png/Shaft_00333_diam.png", "detail_png/Shaft_00333_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø79.1 mm and length at least 202.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 48.5 mm (from Z=0.0 to Z=48.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.8 mm over length 71.6 mm (from Z=0.0 to Z=149.4).\n10. Finish turn diameter Ø47.4 mm over length 14.4 mm (from Z=0.0 to Z=77.8).\n11. Finish turn diameter Ø30.0 mm over length 63.4 mm (from Z=0.0 to Z=63.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01995", "images": ["images/Shaft_01995.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.8 mm and length at least 165.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.8 mm over length 48.6 mm (from Z=0.0 to Z=48.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.4 mm over length 36.5 mm (from Z=0.0 to Z=111.6).\n9. Finish turn diameter Ø65.0 mm over length 10.8 mm (from Z=0.0 to Z=75.1).\n10. Finish turn diameter Ø60.3 mm over length 64.3 mm (from Z=0.0 to Z=64.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03593", "images": ["images/Shaft_03593.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.3 mm and length at least 284.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.3 mm over length 145.2 mm (from Z=0.0 to Z=145.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.3 mm over length 83.7 mm (from Z=0.0 to Z=134.7).\n10. Finish turn diameter Ø30.0 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01351", "images": ["images/Shaft_01351.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.4 mm and length at least 271.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.4 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.3 mm over length 77.8 mm (from Z=0.0 to Z=236.4).\n10. Finish turn diameter Ø61.2 mm over length 108.1 mm (from Z=0.0 to Z=158.6).\n11. Finish turn diameter Ø55.9 mm over length 50.5 mm (from Z=0.0 to Z=50.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03030", "images": ["images/Shaft_03030.png", "detail_png/Shaft_03030_length.png", "detail_png/Shaft_03030_diam.png", "detail_png/Shaft_03030_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.8 mm and length at least 166.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 38.0 mm (from Z=0.0 to Z=38.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.5 mm over length 26.1 mm (from Z=0.0 to Z=123.3).\n9. Finish turn diameter Ø50.6 mm over length 27.2 mm (from Z=0.0 to Z=97.2).\n10. Finish turn diameter Ø32.0 mm over length 40.5 mm (from Z=0.0 to Z=70.0).\n11. Finish turn diameter Ø30.0 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01376", "images": ["images/Shaft_01376.png", "detail_png/Shaft_01376_length.png", "detail_png/Shaft_01376_diam.png", "detail_png/Shaft_01376_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 174.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 117.5 mm (from Z=0.0 to Z=117.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.1 mm over length 52.4 mm (from Z=0.0 to Z=52.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03400", "images": ["images/Shaft_03400.png", "detail_png/Shaft_03400_length.png", "detail_png/Shaft_03400_diam.png", "detail_png/Shaft_03400_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.5 mm and length at least 115.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 28.5 mm (from Z=0.0 to Z=28.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.0 mm over length 9.7 mm (from Z=0.0 to Z=81.8).\n9. Finish turn diameter Ø51.1 mm over length 11.1 mm (from Z=0.0 to Z=72.1).\n10. Finish turn diameter Ø41.3 mm over length 32.4 mm (from Z=0.0 to Z=61.0).\n11. Finish turn diameter Ø33.6 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01157", "images": ["images/Shaft_01157.png", "detail_png/Shaft_01157_length.png", "detail_png/Shaft_01157_diam.png", "detail_png/Shaft_01157_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.5 mm and length at least 232.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.5 mm over length 79.1 mm (from Z=0.0 to Z=79.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.8 mm over length 98.8 mm (from Z=0.0 to Z=147.9).\n10. Finish turn diameter Ø31.3 mm over length 49.1 mm (from Z=0.0 to Z=49.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02243", "images": ["images/Shaft_02243.png", "detail_png/Shaft_02243_length.png", "detail_png/Shaft_02243_diam.png", "detail_png/Shaft_02243_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 113.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø20.3 mm over length 55.7 mm (from Z=0.0 to Z=55.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04347", "images": ["images/Shaft_04347.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.7 mm and length at least 307.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.4 mm over length 156.7 mm (from Z=0.0 to Z=274.2).\n10. Finish turn diameter Ø37.0 mm over length 117.5 mm (from Z=0.0 to Z=117.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00517", "images": ["images/Shaft_00517.png", "detail_png/Shaft_00517_length.png", "detail_png/Shaft_00517_diam.png", "detail_png/Shaft_00517_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.8 mm and length at least 208.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 192.0 mm (from Z=0.0 to Z=192.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02748", "images": ["images/Shaft_02748.png", "detail_png/Shaft_02748_length.png", "detail_png/Shaft_02748_diam.png", "detail_png/Shaft_02748_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 122.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 92.1 mm (from Z=0.0 to Z=92.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.4 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04684", "images": ["images/Shaft_04684.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.9 mm and length at least 89.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.9 mm over length 11.9 mm (from Z=0.0 to Z=11.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.4 mm over length 28.7 mm (from Z=0.0 to Z=72.8).\n9. Finish turn diameter Ø41.2 mm over length 32.0 mm (from Z=0.0 to Z=44.1).\n10. Finish turn diameter Ø34.2 mm over length 12.1 mm (from Z=0.0 to Z=12.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00373", "images": ["images/Shaft_00373.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.9 mm and length at least 298.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.9 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.2 mm over length 59.4 mm (from Z=0.0 to Z=220.1).\n10. Finish turn diameter Ø30.0 mm over length 160.7 mm (from Z=0.0 to Z=160.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01746", "images": ["images/Shaft_01746.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.8 mm and length at least 308.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.8 mm over length 22.6 mm (from Z=0.0 to Z=22.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 281.0 mm (from Z=0.0 to Z=281.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02634", "images": ["images/Shaft_02634.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 72.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.2 mm over length 27.2 mm (from Z=0.0 to Z=27.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01125", "images": ["images/Shaft_01125.png", "detail_png/Shaft_01125_length.png", "detail_png/Shaft_01125_diam.png", "detail_png/Shaft_01125_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø49.2 mm and length at least 126.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.2 mm over length 34.2 mm (from Z=0.0 to Z=34.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.6 mm over length 25.7 mm (from Z=0.0 to Z=87.6).\n9. Finish turn diameter Ø30.0 mm over length 61.9 mm (from Z=0.0 to Z=61.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00989", "images": ["images/Shaft_00989.png", "detail_png/Shaft_00989_length.png", "detail_png/Shaft_00989_diam.png", "detail_png/Shaft_00989_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.0 mm and length at least 323.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.0 mm over length 118.3 mm (from Z=0.0 to Z=118.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 28.0 mm (from Z=0.0 to Z=200.6).\n10. Finish turn diameter Ø35.1 mm over length 44.0 mm (from Z=0.0 to Z=172.6).\n11. Finish turn diameter Ø30.0 mm over length 128.6 mm (from Z=0.0 to Z=128.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02656", "images": ["images/Shaft_02656.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø76.2 mm and length at least 76.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.2 mm over length 11.7 mm (from Z=0.0 to Z=11.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.2 mm over length 5.0 mm (from Z=0.0 to Z=60.0).\n9. Finish turn diameter Ø46.2 mm over length 26.4 mm (from Z=0.0 to Z=55.0).\n10. Finish turn diameter Ø34.8 mm over length 22.8 mm (from Z=0.0 to Z=28.6).\n11. Finish turn diameter Ø30.0 mm over length 5.8 mm (from Z=0.0 to Z=5.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03293", "images": ["images/Shaft_03293.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.0 mm and length at least 257.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 17.0 mm (from Z=0.0 to Z=216.4).\n10. Finish turn diameter Ø41.6 mm over length 83.3 mm (from Z=0.0 to Z=199.4).\n11. Finish turn diameter Ø36.6 mm over length 26.3 mm (from Z=0.0 to Z=116.1).\n12. Finish turn diameter Ø30.0 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02763", "images": ["images/Shaft_02763.png", "detail_png/Shaft_02763_length.png", "detail_png/Shaft_02763_diam.png", "detail_png/Shaft_02763_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.4 mm and length at least 95.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 15.2 mm (from Z=0.0 to Z=15.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.9 mm over length 24.2 mm (from Z=0.0 to Z=74.8).\n9. Finish turn diameter Ø47.5 mm over length 18.1 mm (from Z=0.0 to Z=50.6).\n10. Finish turn diameter Ø34.1 mm over length 8.4 mm (from Z=0.0 to Z=32.5).\n11. Finish turn diameter Ø30.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03491", "images": ["images/Shaft_03491.png", "detail_png/Shaft_03491_length.png", "detail_png/Shaft_03491_diam.png", "detail_png/Shaft_03491_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 173.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 144.4 mm (from Z=0.0 to Z=144.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.9 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01660", "images": ["images/Shaft_01660.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.2 mm and length at least 239.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 13.7 mm (from Z=0.0 to Z=13.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.9 mm over length 73.0 mm (from Z=0.0 to Z=221.1).\n10. Finish turn diameter Ø54.8 mm over length 63.3 mm (from Z=0.0 to Z=148.1).\n11. Finish turn diameter Ø46.2 mm over length 65.7 mm (from Z=0.0 to Z=84.8).\n12. Finish turn diameter Ø36.1 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04392", "images": ["images/Shaft_04392.png", "detail_png/Shaft_04392_length.png", "detail_png/Shaft_04392_diam.png", "detail_png/Shaft_04392_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.2 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.2 mm over length 55.3 mm (from Z=0.0 to Z=55.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.4 mm over length 67.1 mm (from Z=0.0 to Z=146.1).\n10. Finish turn diameter Ø45.9 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01806", "images": ["images/Shaft_01806.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.4 mm and length at least 320.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.9 mm over length 43.4 mm (from Z=0.0 to Z=279.2).\n10. Finish turn diameter Ø37.4 mm over length 69.2 mm (from Z=0.0 to Z=235.8).\n11. Finish turn diameter Ø30.0 mm over length 166.6 mm (from Z=0.0 to Z=166.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04072", "images": ["images/Shaft_04072.png", "detail_png/Shaft_04072_length.png", "detail_png/Shaft_04072_diam.png", "detail_png/Shaft_04072_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.8 mm and length at least 273.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.8 mm over length 80.6 mm (from Z=0.0 to Z=80.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.5 mm over length 21.3 mm (from Z=0.0 to Z=187.8).\n10. Finish turn diameter Ø30.0 mm over length 166.5 mm (from Z=0.0 to Z=166.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00935", "images": ["images/Shaft_00935.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.1 mm and length at least 318.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 107.0 mm (from Z=0.0 to Z=107.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 15.1 mm (from Z=0.0 to Z=206.1).\n10. Finish turn diameter Ø30.0 mm over length 191.0 mm (from Z=0.0 to Z=191.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00871", "images": ["images/Shaft_00871.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.3 mm and length at least 209.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.3 mm over length 107.4 mm (from Z=0.0 to Z=107.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.5 mm over length 67.2 mm (from Z=0.0 to Z=97.4).\n10. Finish turn diameter Ø43.2 mm over length 30.2 mm (from Z=0.0 to Z=30.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00523", "images": ["images/Shaft_00523.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.3 mm and length at least 162.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.3 mm over length 39.3 mm (from Z=0.0 to Z=39.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.6 mm over length 35.4 mm (from Z=0.0 to Z=118.6).\n9. Finish turn diameter Ø33.8 mm over length 48.1 mm (from Z=0.0 to Z=83.2).\n10. Finish turn diameter Ø30.0 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01398", "images": ["images/Shaft_01398.png", "detail_png/Shaft_01398_length.png", "detail_png/Shaft_01398_diam.png", "detail_png/Shaft_01398_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 132.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 67.6 mm (from Z=0.0 to Z=67.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.5 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03737", "images": ["images/Shaft_03737.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.7 mm and length at least 202.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.7 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.1 mm over length 10.9 mm (from Z=0.0 to Z=177.1).\n10. Finish turn diameter Ø33.8 mm over length 39.7 mm (from Z=0.0 to Z=166.2).\n11. Finish turn diameter Ø30.0 mm over length 126.5 mm (from Z=0.0 to Z=126.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04535", "images": ["images/Shaft_04535.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø69.5 mm and length at least 150.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.5 mm over length 36.1 mm (from Z=0.0 to Z=36.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 33.2 mm (from Z=0.0 to Z=109.1).\n9. Finish turn diameter Ø38.4 mm over length 10.4 mm (from Z=0.0 to Z=75.9).\n10. Finish turn diameter Ø30.0 mm over length 65.5 mm (from Z=0.0 to Z=65.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02517", "images": ["images/Shaft_02517.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.6 mm and length at least 148.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 38.3 mm (from Z=0.0 to Z=38.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.6 mm over length 16.7 mm (from Z=0.0 to Z=105.2).\n9. Finish turn diameter Ø50.5 mm over length 45.2 mm (from Z=0.0 to Z=88.5).\n10. Finish turn diameter Ø36.9 mm over length 43.3 mm (from Z=0.0 to Z=43.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00409", "images": ["images/Shaft_00409.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.7 mm and length at least 185.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.2 mm over length 27.1 mm (from Z=0.0 to Z=155.2).\n10. Finish turn diameter Ø30.0 mm over length 128.1 mm (from Z=0.0 to Z=128.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01411", "images": ["images/Shaft_01411.png", "detail_png/Shaft_01411_length.png", "detail_png/Shaft_01411_diam.png", "detail_png/Shaft_01411_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.8 mm and length at least 201.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 99.4 mm (from Z=0.0 to Z=99.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.5 mm over length 60.4 mm (from Z=0.0 to Z=97.3).\n10. Finish turn diameter Ø30.0 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00117", "images": ["images/Shaft_00117.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø80.7 mm and length at least 153.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.7 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.9 mm over length 37.7 mm (from Z=0.0 to Z=131.5).\n9. Finish turn diameter Ø58.9 mm over length 40.3 mm (from Z=0.0 to Z=93.8).\n10. Finish turn diameter Ø50.3 mm over length 33.4 mm (from Z=0.0 to Z=53.5).\n11. Finish turn diameter Ø32.1 mm over length 5.1 mm (from Z=0.0 to Z=20.1).\n12. Finish turn diameter Ø30.0 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01069", "images": ["images/Shaft_01069.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 257.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.5 mm (from Z=0.0 to Z=146.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.8 mm over length 105.9 mm (from Z=0.0 to Z=105.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01988", "images": ["images/Shaft_01988.png", "detail_png/Shaft_01988_length.png", "detail_png/Shaft_01988_diam.png", "detail_png/Shaft_01988_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø56.8 mm and length at least 312.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 104.0 mm (from Z=0.0 to Z=104.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.4 mm over length 32.9 mm (from Z=0.0 to Z=203.1).\n10. Finish turn diameter Ø37.1 mm over length 170.2 mm (from Z=0.0 to Z=170.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00375", "images": ["images/Shaft_00375.png", "detail_png/Shaft_00375_length.png", "detail_png/Shaft_00375_diam.png", "detail_png/Shaft_00375_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.3 mm and length at least 117.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 98.8 mm (from Z=0.0 to Z=98.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03860", "images": ["images/Shaft_03860.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.1 mm and length at least 256.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.1 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.9 mm over length 58.2 mm (from Z=0.0 to Z=190.6).\n10. Finish turn diameter Ø30.0 mm over length 132.4 mm (from Z=0.0 to Z=132.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00156", "images": ["images/Shaft_00156.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.9 mm and length at least 281.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.9 mm over length 24.3 mm (from Z=0.0 to Z=220.2).\n10. Finish turn diameter Ø30.0 mm over length 195.9 mm (from Z=0.0 to Z=195.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04005", "images": ["images/Shaft_04005.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø80.5 mm and length at least 196.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.5 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.5 mm over length 28.4 mm (from Z=0.0 to Z=182.0).\n10. Finish turn diameter Ø50.0 mm over length 47.9 mm (from Z=0.0 to Z=153.6).\n11. Finish turn diameter Ø32.7 mm over length 33.0 mm (from Z=0.0 to Z=105.7).\n12. Finish turn diameter Ø30.0 mm over length 72.7 mm (from Z=0.0 to Z=72.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04837", "images": ["images/Shaft_04837.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.1 mm and length at least 225.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.1 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.3 mm over length 67.8 mm (from Z=0.0 to Z=188.9).\n10. Finish turn diameter Ø30.0 mm over length 121.1 mm (from Z=0.0 to Z=121.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00302", "images": ["images/Shaft_00302.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.7 mm and length at least 102.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.7 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 75.3 mm (from Z=0.0 to Z=75.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00590", "images": ["images/Shaft_00590.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.6 mm and length at least 263.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.6 mm over length 87.0 mm (from Z=0.0 to Z=87.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.4 mm over length 56.4 mm (from Z=0.0 to Z=171.3).\n10. Finish turn diameter Ø41.4 mm over length 13.4 mm (from Z=0.0 to Z=114.9).\n11. Finish turn diameter Ø32.1 mm over length 101.5 mm (from Z=0.0 to Z=101.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01908", "images": ["images/Shaft_01908.png", "detail_png/Shaft_01908_length.png", "detail_png/Shaft_01908_diam.png", "detail_png/Shaft_01908_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.9 mm and length at least 65.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.7 mm over length 22.6 mm (from Z=0.0 to Z=44.4).\n9. Finish turn diameter Ø30.6 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01220", "images": ["images/Shaft_01220.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.4 mm and length at least 174.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.4 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 141.4 mm (from Z=0.0 to Z=141.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03754", "images": ["images/Shaft_03754.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.2 mm and length at least 254.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 41.0 mm (from Z=0.0 to Z=41.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 208.7 mm (from Z=0.0 to Z=208.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04285", "images": ["images/Shaft_04285.png", "detail_png/Shaft_04285_length.png", "detail_png/Shaft_04285_diam.png", "detail_png/Shaft_04285_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.5 mm and length at least 309.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.5 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 269.6 mm (from Z=0.0 to Z=269.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01734", "images": ["images/Shaft_01734.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.4 mm and length at least 94.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 15.3 mm (from Z=0.0 to Z=15.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 7.8 mm (from Z=0.0 to Z=73.8).\n9. Finish turn diameter Ø51.6 mm over length 26.9 mm (from Z=0.0 to Z=66.0).\n10. Finish turn diameter Ø39.5 mm over length 7.8 mm (from Z=0.0 to Z=39.1).\n11. Finish turn diameter Ø30.0 mm over length 31.3 mm (from Z=0.0 to Z=31.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04987", "images": ["images/Shaft_04987.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.4 mm and length at least 76.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.4 mm over length 20.0 mm (from Z=0.0 to Z=20.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø65.1 mm over length 21.3 mm (from Z=0.0 to Z=51.6).\n9. Finish turn diameter Ø49.5 mm over length 8.8 mm (from Z=0.0 to Z=30.3).\n10. Finish turn diameter Ø30.6 mm over length 21.5 mm (from Z=0.0 to Z=21.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03321", "images": ["images/Shaft_03321.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 116.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 85.7 mm (from Z=0.0 to Z=85.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.9 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00350", "images": ["images/Shaft_00350.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.3 mm and length at least 288.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 123.2 mm (from Z=0.0 to Z=123.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.3 mm over length 84.2 mm (from Z=0.0 to Z=159.9).\n10. Finish turn diameter Ø30.0 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02766", "images": ["images/Shaft_02766.png", "detail_png/Shaft_02766_length.png", "detail_png/Shaft_02766_diam.png", "detail_png/Shaft_02766_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø70.0 mm and length at least 133.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 29.6 mm (from Z=0.0 to Z=29.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.8 mm over length 25.5 mm (from Z=0.0 to Z=99.2).\n9. Finish turn diameter Ø43.4 mm over length 45.9 mm (from Z=0.0 to Z=73.7).\n10. Finish turn diameter Ø36.4 mm over length 27.8 mm (from Z=0.0 to Z=27.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00459", "images": ["images/Shaft_00459.png", "detail_png/Shaft_00459_length.png", "detail_png/Shaft_00459_diam.png", "detail_png/Shaft_00459_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.2 mm and length at least 94.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø72.6 mm over length 28.1 mm (from Z=0.0 to Z=62.1).\n9. Finish turn diameter Ø54.9 mm over length 14.2 mm (from Z=0.0 to Z=34.0).\n10. Finish turn diameter Ø49.8 mm over length 19.8 mm (from Z=0.0 to Z=19.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02779", "images": ["images/Shaft_02779.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.4 mm and length at least 206.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 76.5 mm (from Z=0.0 to Z=76.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 125.1 mm (from Z=0.0 to Z=125.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00303", "images": ["images/Shaft_00303.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 295.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 195.6 mm (from Z=0.0 to Z=195.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.7 mm over length 94.6 mm (from Z=0.0 to Z=94.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00134", "images": ["images/Shaft_00134.png", "detail_png/Shaft_00134_length.png", "detail_png/Shaft_00134_diam.png", "detail_png/Shaft_00134_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.1 mm and length at least 292.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.1 mm over length 118.0 mm (from Z=0.0 to Z=118.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.0 mm over length 56.3 mm (from Z=0.0 to Z=169.7).\n10. Finish turn diameter Ø66.9 mm over length 81.7 mm (from Z=0.0 to Z=113.4).\n11. Finish turn diameter Ø54.0 mm over length 31.7 mm (from Z=0.0 to Z=31.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03680", "images": ["images/Shaft_03680.png", "detail_png/Shaft_03680_length.png", "detail_png/Shaft_03680_diam.png", "detail_png/Shaft_03680_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.4 mm and length at least 170.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.4 mm over length 27.7 mm (from Z=0.0 to Z=27.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.7 mm over length 27.4 mm (from Z=0.0 to Z=137.8).\n10. Finish turn diameter Ø30.0 mm over length 110.4 mm (from Z=0.0 to Z=110.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04374", "images": ["images/Shaft_04374.png", "detail_png/Shaft_04374_length.png", "detail_png/Shaft_04374_diam.png", "detail_png/Shaft_04374_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.0 mm and length at least 230.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 94.7 mm (from Z=0.0 to Z=94.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø65.8 mm over length 32.9 mm (from Z=0.0 to Z=130.3).\n10. Finish turn diameter Ø49.9 mm over length 97.4 mm (from Z=0.0 to Z=97.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04093", "images": ["images/Shaft_04093.png", "detail_png/Shaft_04093_length.png", "detail_png/Shaft_04093_diam.png", "detail_png/Shaft_04093_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø39.3 mm and length at least 253.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.3 mm over length 75.7 mm (from Z=0.0 to Z=75.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 84.3 mm (from Z=0.0 to Z=172.7).\n10. Finish turn diameter Ø30.0 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02520", "images": ["images/Shaft_02520.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 124.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 79.8 mm (from Z=0.0 to Z=79.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø20.2 mm over length 39.8 mm (from Z=0.0 to Z=39.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00516", "images": ["images/Shaft_00516.png", "detail_png/Shaft_00516_length.png", "detail_png/Shaft_00516_diam.png", "detail_png/Shaft_00516_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.2 mm and length at least 257.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.2 mm over length 58.8 mm (from Z=0.0 to Z=58.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.2 mm over length 64.8 mm (from Z=0.0 to Z=193.2).\n10. Finish turn diameter Ø30.0 mm over length 128.4 mm (from Z=0.0 to Z=128.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03184", "images": ["images/Shaft_03184.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 203.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 167.8 mm (from Z=0.0 to Z=167.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04007", "images": ["images/Shaft_04007.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.8 mm and length at least 263.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.8 mm over length 75.8 mm (from Z=0.0 to Z=75.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.6 mm over length 73.2 mm (from Z=0.0 to Z=182.8).\n10. Finish turn diameter Ø43.4 mm over length 50.5 mm (from Z=0.0 to Z=109.6).\n11. Finish turn diameter Ø32.8 mm over length 59.1 mm (from Z=0.0 to Z=59.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01953", "images": ["images/Shaft_01953.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.4 mm and length at least 252.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.4 mm over length 114.6 mm (from Z=0.0 to Z=114.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 132.4 mm (from Z=0.0 to Z=132.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00207", "images": ["images/Shaft_00207.png", "detail_png/Shaft_00207_length.png", "detail_png/Shaft_00207_diam.png", "detail_png/Shaft_00207_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.2 mm and length at least 121.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 35.5 mm (from Z=0.0 to Z=35.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 81.4 mm (from Z=0.0 to Z=81.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04503", "images": ["images/Shaft_04503.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.2 mm and length at least 243.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.2 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.6 mm over length 49.5 mm (from Z=0.0 to Z=221.6).\n10. Finish turn diameter Ø49.2 mm over length 54.9 mm (from Z=0.0 to Z=172.1).\n11. Finish turn diameter Ø30.0 mm over length 117.2 mm (from Z=0.0 to Z=117.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00292", "images": ["images/Shaft_00292.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.9 mm and length at least 251.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 47.2 mm (from Z=0.0 to Z=180.9).\n10. Finish turn diameter Ø35.8 mm over length 73.9 mm (from Z=0.0 to Z=133.7).\n11. Finish turn diameter Ø30.0 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01146", "images": ["images/Shaft_01146.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.0 mm and length at least 154.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 53.4 mm (from Z=0.0 to Z=123.2).\n9. Finish turn diameter Ø37.0 mm over length 16.1 mm (from Z=0.0 to Z=69.8).\n10. Finish turn diameter Ø30.0 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01552", "images": ["images/Shaft_01552.png", "detail_png/Shaft_01552_length.png", "detail_png/Shaft_01552_diam.png", "detail_png/Shaft_01552_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.1 mm and length at least 178.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.1 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.8 mm over length 35.6 mm (from Z=0.0 to Z=127.8).\n9. Finish turn diameter Ø51.1 mm over length 26.5 mm (from Z=0.0 to Z=92.2).\n10. Finish turn diameter Ø39.0 mm over length 44.7 mm (from Z=0.0 to Z=65.7).\n11. Finish turn diameter Ø30.0 mm over length 21.0 mm (from Z=0.0 to Z=21.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03587", "images": ["images/Shaft_03587.png", "detail_png/Shaft_03587_length.png", "detail_png/Shaft_03587_diam.png", "detail_png/Shaft_03587_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.1 mm and length at least 78.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.1 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø69.0 mm over length 19.1 mm (from Z=0.0 to Z=53.4).\n9. Finish turn diameter Ø53.9 mm over length 8.6 mm (from Z=0.0 to Z=34.3).\n10. Finish turn diameter Ø47.1 mm over length 25.7 mm (from Z=0.0 to Z=25.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00695", "images": ["images/Shaft_00695.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 155.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 99.0 mm (from Z=0.0 to Z=99.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 51.9 mm (from Z=0.0 to Z=51.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03985", "images": ["images/Shaft_03985.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø37.0 mm and length at least 120.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.0 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 92.5 mm (from Z=0.0 to Z=92.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02943", "images": ["images/Shaft_02943.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 103.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 67.4 mm (from Z=0.0 to Z=67.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø24.3 mm over length 31.1 mm (from Z=0.0 to Z=31.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00874", "images": ["images/Shaft_00874.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø55.1 mm and length at least 203.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 22.3 mm (from Z=0.0 to Z=22.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.2 mm over length 43.1 mm (from Z=0.0 to Z=176.6).\n10. Finish turn diameter Ø30.0 mm over length 133.5 mm (from Z=0.0 to Z=133.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04938", "images": ["images/Shaft_04938.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø38.1 mm and length at least 245.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 43.2 mm (from Z=0.0 to Z=43.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.6 mm over length 36.5 mm (from Z=0.0 to Z=197.4).\n10. Finish turn diameter Ø30.0 mm over length 160.9 mm (from Z=0.0 to Z=160.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02448", "images": ["images/Shaft_02448.png", "detail_png/Shaft_02448_length.png", "detail_png/Shaft_02448_diam.png", "detail_png/Shaft_02448_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.1 mm and length at least 85.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.1 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.9 mm over length 23.4 mm (from Z=0.0 to Z=42.5).\n9. Finish turn diameter Ø47.0 mm over length 19.1 mm (from Z=0.0 to Z=19.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01564", "images": ["images/Shaft_01564.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.5 mm and length at least 84.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.9 mm over length 8.5 mm (from Z=0.0 to Z=59.7).\n9. Finish turn diameter Ø47.5 mm over length 18.2 mm (from Z=0.0 to Z=51.2).\n10. Finish turn diameter Ø33.6 mm over length 5.6 mm (from Z=0.0 to Z=33.0).\n11. Finish turn diameter Ø30.0 mm over length 27.4 mm (from Z=0.0 to Z=27.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03147", "images": ["images/Shaft_03147.png", "detail_png/Shaft_03147_length.png", "detail_png/Shaft_03147_diam.png", "detail_png/Shaft_03147_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø55.9 mm and length at least 250.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.9 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.8 mm over length 53.0 mm (from Z=0.0 to Z=207.7).\n10. Finish turn diameter Ø34.3 mm over length 81.4 mm (from Z=0.0 to Z=154.7).\n11. Finish turn diameter Ø30.0 mm over length 73.3 mm (from Z=0.0 to Z=73.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00322", "images": ["images/Shaft_00322.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø61.9 mm and length at least 288.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.9 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.8 mm over length 119.7 mm (from Z=0.0 to Z=262.6).\n10. Finish turn diameter Ø37.6 mm over length 110.3 mm (from Z=0.0 to Z=142.9).\n11. Finish turn diameter Ø32.2 mm over length 32.6 mm (from Z=0.0 to Z=32.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01446", "images": ["images/Shaft_01446.png", "detail_png/Shaft_01446_length.png", "detail_png/Shaft_01446_diam.png", "detail_png/Shaft_01446_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø71.0 mm and length at least 85.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.0 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.4 mm over length 10.6 mm (from Z=0.0 to Z=62.2).\n9. Finish turn diameter Ø44.7 mm over length 6.0 mm (from Z=0.0 to Z=51.6).\n10. Finish turn diameter Ø34.7 mm over length 9.7 mm (from Z=0.0 to Z=45.6).\n11. Finish turn diameter Ø30.0 mm over length 35.9 mm (from Z=0.0 to Z=35.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01663", "images": ["images/Shaft_01663.png", "detail_png/Shaft_01663_length.png", "detail_png/Shaft_01663_diam.png", "detail_png/Shaft_01663_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.8 mm and length at least 153.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 60.5 mm (from Z=0.0 to Z=60.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.0 mm over length 21.8 mm (from Z=0.0 to Z=88.1).\n9. Finish turn diameter Ø30.0 mm over length 66.3 mm (from Z=0.0 to Z=66.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02375", "images": ["images/Shaft_02375.png", "detail_png/Shaft_02375_length.png", "detail_png/Shaft_02375_diam.png", "detail_png/Shaft_02375_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.7 mm and length at least 151.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.7 mm over length 29.4 mm (from Z=0.0 to Z=29.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.1 mm over length 41.1 mm (from Z=0.0 to Z=116.7).\n9. Finish turn diameter Ø30.2 mm over length 30.5 mm (from Z=0.0 to Z=75.6).\n10. Finish turn diameter Ø30.0 mm over length 45.1 mm (from Z=0.0 to Z=45.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03765", "images": ["images/Shaft_03765.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø74.6 mm and length at least 177.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.6 mm over length 13.2 mm (from Z=0.0 to Z=13.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.7 mm over length 21.6 mm (from Z=0.0 to Z=159.5).\n9. Finish turn diameter Ø52.3 mm over length 47.9 mm (from Z=0.0 to Z=137.9).\n10. Finish turn diameter Ø37.6 mm over length 57.1 mm (from Z=0.0 to Z=90.0).\n11. Finish turn diameter Ø32.5 mm over length 23.9 mm (from Z=0.0 to Z=32.9).\n12. Finish turn diameter Ø30.0 mm over length 9.0 mm (from Z=0.0 to Z=9.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00659", "images": ["images/Shaft_00659.png", "detail_png/Shaft_00659_length.png", "detail_png/Shaft_00659_diam.png", "detail_png/Shaft_00659_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø35.9 mm and length at least 311.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.9 mm over length 32.9 mm (from Z=0.0 to Z=32.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 273.7 mm (from Z=0.0 to Z=273.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02785", "images": ["images/Shaft_02785.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.0 mm and length at least 190.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.0 mm over length 53.0 mm (from Z=0.0 to Z=53.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.1 mm over length 71.1 mm (from Z=0.0 to Z=132.1).\n9. Finish turn diameter Ø33.2 mm over length 25.2 mm (from Z=0.0 to Z=61.0).\n10. Finish turn diameter Ø30.0 mm over length 35.8 mm (from Z=0.0 to Z=35.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04379", "images": ["images/Shaft_04379.png", "detail_png/Shaft_04379_length.png", "detail_png/Shaft_04379_diam.png", "detail_png/Shaft_04379_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 121.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 98.6 mm (from Z=0.0 to Z=98.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.9 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02992", "images": ["images/Shaft_02992.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.2 mm and length at least 118.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 62.5 mm (from Z=0.0 to Z=62.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.2 mm over length 29.4 mm (from Z=0.0 to Z=50.7).\n9. Finish turn diameter Ø41.2 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00742", "images": ["images/Shaft_00742.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.1 mm and length at least 67.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.1 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.1 mm over length 5.0 mm (from Z=0.0 to Z=55.0).\n9. Finish turn diameter Ø43.6 mm over length 11.9 mm (from Z=0.0 to Z=50.0).\n10. Finish turn diameter Ø30.0 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00452", "images": ["images/Shaft_00452.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.9 mm and length at least 275.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.9 mm over length 128.4 mm (from Z=0.0 to Z=128.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.9 mm over length 18.6 mm (from Z=0.0 to Z=141.7).\n10. Finish turn diameter Ø41.0 mm over length 90.1 mm (from Z=0.0 to Z=123.1).\n11. Finish turn diameter Ø30.0 mm over length 33.0 mm (from Z=0.0 to Z=33.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03281", "images": ["images/Shaft_03281.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø60.5 mm and length at least 203.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 86.8 mm (from Z=0.0 to Z=86.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.1 mm over length 38.6 mm (from Z=0.0 to Z=111.3).\n10. Finish turn diameter Ø30.0 mm over length 72.7 mm (from Z=0.0 to Z=72.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02480", "images": ["images/Shaft_02480.png", "detail_png/Shaft_02480_length.png", "detail_png/Shaft_02480_diam.png", "detail_png/Shaft_02480_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.8 mm and length at least 193.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 56.5 mm (from Z=0.0 to Z=56.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.0 mm over length 34.5 mm (from Z=0.0 to Z=132.1).\n10. Finish turn diameter Ø30.0 mm over length 97.6 mm (from Z=0.0 to Z=97.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02731", "images": ["images/Shaft_02731.png", "detail_png/Shaft_02731_length.png", "detail_png/Shaft_02731_diam.png", "detail_png/Shaft_02731_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.7 mm and length at least 70.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.7 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.7 mm over length 12.1 mm (from Z=0.0 to Z=43.5).\n9. Finish turn diameter Ø33.0 mm over length 6.7 mm (from Z=0.0 to Z=31.4).\n10. Finish turn diameter Ø30.0 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02940", "images": ["images/Shaft_02940.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.3 mm and length at least 141.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.3 mm over length 42.6 mm (from Z=0.0 to Z=42.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 7.2 mm (from Z=0.0 to Z=94.3).\n9. Finish turn diameter Ø37.3 mm over length 17.9 mm (from Z=0.0 to Z=87.1).\n10. Finish turn diameter Ø30.0 mm over length 69.2 mm (from Z=0.0 to Z=69.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04385", "images": ["images/Shaft_04385.png", "detail_png/Shaft_04385_length.png", "detail_png/Shaft_04385_diam.png", "detail_png/Shaft_04385_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.4 mm and length at least 289.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.7 mm over length 18.1 mm (from Z=0.0 to Z=244.8).\n10. Finish turn diameter Ø30.0 mm over length 226.7 mm (from Z=0.0 to Z=226.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00992", "images": ["images/Shaft_00992.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.5 mm and length at least 207.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.5 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 158.5 mm (from Z=0.0 to Z=158.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03949", "images": ["images/Shaft_03949.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø53.6 mm and length at least 146.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 42.8 mm (from Z=0.0 to Z=42.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø41.5 mm over length 27.8 mm (from Z=0.0 to Z=99.0).\n9. Finish turn diameter Ø34.1 mm over length 55.7 mm (from Z=0.0 to Z=71.2).\n10. Finish turn diameter Ø30.0 mm over length 15.5 mm (from Z=0.0 to Z=15.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03149", "images": ["images/Shaft_03149.png", "detail_png/Shaft_03149_length.png", "detail_png/Shaft_03149_diam.png", "detail_png/Shaft_03149_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø61.5 mm and length at least 103.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.5 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.2 mm over length 19.9 mm (from Z=0.0 to Z=61.6).\n9. Finish turn diameter Ø30.0 mm over length 41.7 mm (from Z=0.0 to Z=41.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00027", "images": ["images/Shaft_00027.png", "detail_png/Shaft_00027_length.png", "detail_png/Shaft_00027_diam.png", "detail_png/Shaft_00027_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø43.7 mm and length at least 263.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.7 mm over length 50.9 mm (from Z=0.0 to Z=50.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.3 mm over length 46.7 mm (from Z=0.0 to Z=207.3).\n10. Finish turn diameter Ø30.0 mm over length 160.6 mm (from Z=0.0 to Z=160.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01850", "images": ["images/Shaft_01850.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.4 mm and length at least 140.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.4 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 105.1 mm (from Z=0.0 to Z=105.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04424", "images": ["images/Shaft_04424.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.2 mm and length at least 141.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.2 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.1 mm over length 23.8 mm (from Z=0.0 to Z=80.4).\n9. Finish turn diameter Ø42.4 mm over length 56.6 mm (from Z=0.0 to Z=56.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00574", "images": ["images/Shaft_00574.png", "detail_png/Shaft_00574_length.png", "detail_png/Shaft_00574_diam.png", "detail_png/Shaft_00574_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.4 mm and length at least 323.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.4 mm over length 91.3 mm (from Z=0.0 to Z=91.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 64.1 mm (from Z=0.0 to Z=227.1).\n10. Finish turn diameter Ø52.5 mm over length 51.4 mm (from Z=0.0 to Z=163.0).\n11. Finish turn diameter Ø43.9 mm over length 45.9 mm (from Z=0.0 to Z=111.6).\n12. Finish turn diameter Ø35.7 mm over length 65.7 mm (from Z=0.0 to Z=65.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03308", "images": ["images/Shaft_03308.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 94.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø29.5 mm over length 49.0 mm (from Z=0.0 to Z=49.0).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03572", "images": ["images/Shaft_03572.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.3 mm and length at least 171.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.3 mm over length 84.4 mm (from Z=0.0 to Z=84.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.5 mm over length 21.5 mm (from Z=0.0 to Z=82.5).\n9. Finish turn diameter Ø42.7 mm over length 61.0 mm (from Z=0.0 to Z=61.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03916", "images": ["images/Shaft_03916.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø62.5 mm and length at least 287.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.5 mm over length 66.1 mm (from Z=0.0 to Z=66.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø49.3 mm over length 52.3 mm (from Z=0.0 to Z=216.6).\n10. Finish turn diameter Ø45.9 mm over length 43.0 mm (from Z=0.0 to Z=164.3).\n11. Finish turn diameter Ø33.9 mm over length 52.0 mm (from Z=0.0 to Z=121.3).\n12. Finish turn diameter Ø30.0 mm over length 69.3 mm (from Z=0.0 to Z=69.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04019", "images": ["images/Shaft_04019.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.5 mm and length at least 241.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 99.8 mm (from Z=0.0 to Z=99.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 32.9 mm (from Z=0.0 to Z=136.4).\n10. Finish turn diameter Ø30.0 mm over length 103.5 mm (from Z=0.0 to Z=103.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04222", "images": ["images/Shaft_04222.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.2 mm and length at least 124.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø62.7 mm over length 43.5 mm (from Z=0.0 to Z=68.4).\n9. Finish turn diameter Ø50.4 mm over length 18.0 mm (from Z=0.0 to Z=24.9).\n10. Finish turn diameter Ø32.3 mm over length 6.9 mm (from Z=0.0 to Z=6.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00030", "images": ["images/Shaft_00030.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.3 mm and length at least 161.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.3 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.9 mm over length 58.4 mm (from Z=0.0 to Z=130.3).\n9. Finish turn diameter Ø33.1 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03205", "images": ["images/Shaft_03205.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.1 mm and length at least 127.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.1 mm over length 8.1 mm (from Z=0.0 to Z=8.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.8 mm over length 58.7 mm (from Z=0.0 to Z=114.7).\n9. Finish turn diameter Ø42.0 mm over length 27.4 mm (from Z=0.0 to Z=56.0).\n10. Finish turn diameter Ø35.5 mm over length 28.6 mm (from Z=0.0 to Z=28.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02701", "images": ["images/Shaft_02701.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø36.6 mm and length at least 231.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.6 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 186.3 mm (from Z=0.0 to Z=186.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01241", "images": ["images/Shaft_01241.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.3 mm and length at least 181.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.3 mm over length 13.6 mm (from Z=0.0 to Z=13.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.1 mm over length 40.9 mm (from Z=0.0 to Z=162.5).\n10. Finish turn diameter Ø30.0 mm over length 121.6 mm (from Z=0.0 to Z=121.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02182", "images": ["images/Shaft_02182.png", "detail_png/Shaft_02182_length.png", "detail_png/Shaft_02182_diam.png", "detail_png/Shaft_02182_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.9 mm and length at least 247.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 31.0 mm (from Z=0.0 to Z=31.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 211.9 mm (from Z=0.0 to Z=211.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03198", "images": ["images/Shaft_03198.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø68.5 mm and length at least 79.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.5 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.9 mm over length 38.6 mm (from Z=0.0 to Z=69.8).\n9. Finish turn diameter Ø31.3 mm over length 31.2 mm (from Z=0.0 to Z=31.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00309", "images": ["images/Shaft_00309.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø57.7 mm and length at least 253.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.0 mm over length 29.3 mm (from Z=0.0 to Z=226.3).\n10. Finish turn diameter Ø40.8 mm over length 36.7 mm (from Z=0.0 to Z=197.0).\n11. Finish turn diameter Ø36.4 mm over length 59.1 mm (from Z=0.0 to Z=160.3).\n12. Finish turn diameter Ø30.0 mm over length 101.2 mm (from Z=0.0 to Z=101.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00007", "images": ["images/Shaft_00007.png", "detail_png/Shaft_00007_length.png", "detail_png/Shaft_00007_diam.png", "detail_png/Shaft_00007_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.0 mm and length at least 213.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.0 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 184.8 mm (from Z=0.0 to Z=184.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01219", "images": ["images/Shaft_01219.png", "detail_png/Shaft_01219_length.png", "detail_png/Shaft_01219_diam.png", "detail_png/Shaft_01219_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.0 mm and length at least 312.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.0 mm over length 113.5 mm (from Z=0.0 to Z=113.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.6 mm over length 143.1 mm (from Z=0.0 to Z=194.3).\n10. Finish turn diameter Ø34.3 mm over length 33.4 mm (from Z=0.0 to Z=51.2).\n11. Finish turn diameter Ø30.0 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04995", "images": ["images/Shaft_04995.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 293.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 181.6 mm (from Z=0.0 to Z=181.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.7 mm over length 106.4 mm (from Z=0.0 to Z=106.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04936", "images": ["images/Shaft_04936.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 322.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 245.5 mm (from Z=0.0 to Z=245.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.1 mm over length 71.6 mm (from Z=0.0 to Z=71.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04815", "images": ["images/Shaft_04815.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø45.1 mm and length at least 288.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.6 mm over length 76.6 mm (from Z=0.0 to Z=207.6).\n10. Finish turn diameter Ø30.0 mm over length 131.0 mm (from Z=0.0 to Z=131.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02052", "images": ["images/Shaft_02052.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø59.5 mm and length at least 279.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 29.0 mm (from Z=0.0 to Z=29.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.6 mm over length 124.8 mm (from Z=0.0 to Z=245.9).\n10. Finish turn diameter Ø32.2 mm over length 27.4 mm (from Z=0.0 to Z=121.1).\n11. Finish turn diameter Ø30.0 mm over length 93.7 mm (from Z=0.0 to Z=93.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00576", "images": ["images/Shaft_00576.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø43.9 mm and length at least 228.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.9 mm over length 53.9 mm (from Z=0.0 to Z=53.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 169.4 mm (from Z=0.0 to Z=169.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00597", "images": ["images/Shaft_00597.png", "detail_png/Shaft_00597_length.png", "detail_png/Shaft_00597_diam.png", "detail_png/Shaft_00597_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 223.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 188.9 mm (from Z=0.0 to Z=188.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.8 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00285", "images": ["images/Shaft_00285.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø50.2 mm and length at least 287.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.2 mm over length 76.4 mm (from Z=0.0 to Z=76.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.9 mm over length 73.4 mm (from Z=0.0 to Z=206.0).\n10. Finish turn diameter Ø34.4 mm over length 84.3 mm (from Z=0.0 to Z=132.6).\n11. Finish turn diameter Ø30.0 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00846", "images": ["images/Shaft_00846.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø50.0 mm and length at least 99.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.0 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 86.4 mm (from Z=0.0 to Z=86.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02121", "images": ["images/Shaft_02121.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.8 mm and length at least 102.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 9.3 mm (from Z=0.0 to Z=9.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.6 mm over length 14.3 mm (from Z=0.0 to Z=87.7).\n9. Finish turn diameter Ø46.6 mm over length 11.4 mm (from Z=0.0 to Z=73.4).\n10. Finish turn diameter Ø37.5 mm over length 19.5 mm (from Z=0.0 to Z=62.0).\n11. Finish turn diameter Ø30.0 mm over length 42.5 mm (from Z=0.0 to Z=42.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03617", "images": ["images/Shaft_03617.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø63.9 mm and length at least 254.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.1 mm over length 40.1 mm (from Z=0.0 to Z=201.3).\n10. Finish turn diameter Ø36.0 mm over length 38.3 mm (from Z=0.0 to Z=161.2).\n11. Finish turn diameter Ø30.0 mm over length 122.9 mm (from Z=0.0 to Z=122.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00870", "images": ["images/Shaft_00870.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.2 mm and length at least 88.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 28.2 mm (from Z=0.0 to Z=72.8).\n9. Finish turn diameter Ø37.0 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01789", "images": ["images/Shaft_01789.png", "detail_png/Shaft_01789_length.png", "detail_png/Shaft_01789_diam.png", "detail_png/Shaft_01789_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø34.0 mm and length at least 128.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.0 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 106.5 mm (from Z=0.0 to Z=106.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03532", "images": ["images/Shaft_03532.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 319.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 252.3 mm (from Z=0.0 to Z=252.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.6 mm over length 62.1 mm (from Z=0.0 to Z=62.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04829", "images": ["images/Shaft_04829.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 121.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 75.5 mm (from Z=0.0 to Z=75.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.2 mm over length 41.2 mm (from Z=0.0 to Z=41.2).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01178", "images": ["images/Shaft_01178.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.8 mm and length at least 164.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.4 mm over length 16.8 mm (from Z=0.0 to Z=119.9).\n9. Finish turn diameter Ø40.5 mm over length 25.9 mm (from Z=0.0 to Z=103.1).\n10. Finish turn diameter Ø30.0 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00888", "images": ["images/Shaft_00888.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.6 mm and length at least 242.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.6 mm over length 45.9 mm (from Z=0.0 to Z=45.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.5 mm over length 12.6 mm (from Z=0.0 to Z=191.9).\n10. Finish turn diameter Ø51.8 mm over length 15.1 mm (from Z=0.0 to Z=179.3).\n11. Finish turn diameter Ø43.3 mm over length 63.9 mm (from Z=0.0 to Z=164.2).\n12. Finish turn diameter Ø31.2 mm over length 35.3 mm (from Z=0.0 to Z=100.3).\n13. Finish turn diameter Ø30.0 mm over length 65.0 mm (from Z=0.0 to Z=65.0).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04030", "images": ["images/Shaft_04030.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.0 mm and length at least 305.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.0 mm over length 41.8 mm (from Z=0.0 to Z=41.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 258.9 mm (from Z=0.0 to Z=258.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01461", "images": ["images/Shaft_01461.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.4 mm and length at least 315.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 81.8 mm (from Z=0.0 to Z=81.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø71.2 mm over length 90.8 mm (from Z=0.0 to Z=228.7).\n10. Finish turn diameter Ø65.8 mm over length 137.9 mm (from Z=0.0 to Z=137.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03216", "images": ["images/Shaft_03216.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.0 mm and length at least 122.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.0 mm over length 17.9 mm (from Z=0.0 to Z=17.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø73.5 mm over length 35.1 mm (from Z=0.0 to Z=100.0).\n9. Finish turn diameter Ø58.1 mm over length 14.8 mm (from Z=0.0 to Z=64.9).\n10. Finish turn diameter Ø43.8 mm over length 13.9 mm (from Z=0.0 to Z=50.1).\n11. Finish turn diameter Ø36.9 mm over length 31.2 mm (from Z=0.0 to Z=36.2).\n12. Finish turn diameter Ø30.8 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01643", "images": ["images/Shaft_01643.png", "detail_png/Shaft_01643_length.png", "detail_png/Shaft_01643_diam.png", "detail_png/Shaft_01643_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø54.1 mm and length at least 246.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.1 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø48.5 mm over length 37.2 mm (from Z=0.0 to Z=205.5).\n10. Finish turn diameter Ø42.6 mm over length 19.9 mm (from Z=0.0 to Z=168.3).\n11. Finish turn diameter Ø30.7 mm over length 44.1 mm (from Z=0.0 to Z=148.4).\n12. Finish turn diameter Ø30.0 mm over length 104.3 mm (from Z=0.0 to Z=104.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04028", "images": ["images/Shaft_04028.png", "detail_png/Shaft_04028_length.png", "detail_png/Shaft_04028_diam.png", "detail_png/Shaft_04028_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.5 mm and length at least 207.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.0 mm over length 66.8 mm (from Z=0.0 to Z=187.7).\n10. Finish turn diameter Ø43.6 mm over length 47.1 mm (from Z=0.0 to Z=120.9).\n11. Finish turn diameter Ø37.2 mm over length 31.9 mm (from Z=0.0 to Z=73.8).\n12. Finish turn diameter Ø30.0 mm over length 41.9 mm (from Z=0.0 to Z=41.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00568", "images": ["images/Shaft_00568.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.6 mm and length at least 66.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.6 mm over length 14.6 mm (from Z=0.0 to Z=14.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.4 mm over length 21.1 mm (from Z=0.0 to Z=46.9).\n9. Finish turn diameter Ø30.0 mm over length 25.8 mm (from Z=0.0 to Z=25.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03609", "images": ["images/Shaft_03609.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø76.4 mm and length at least 238.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.4 mm over length 39.5 mm (from Z=0.0 to Z=39.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.6 mm over length 51.3 mm (from Z=0.0 to Z=194.0).\n10. Finish turn diameter Ø63.3 mm over length 119.1 mm (from Z=0.0 to Z=142.7).\n11. Finish turn diameter Ø57.5 mm over length 23.6 mm (from Z=0.0 to Z=23.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01457", "images": ["images/Shaft_01457.png", "detail_png/Shaft_01457_length.png", "detail_png/Shaft_01457_diam.png", "detail_png/Shaft_01457_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø56.4 mm and length at least 69.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.4 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.8 mm over length 18.5 mm (from Z=0.0 to Z=59.0).\n9. Finish turn diameter Ø30.2 mm over length 15.8 mm (from Z=0.0 to Z=40.5).\n10. Finish turn diameter Ø30.0 mm over length 24.7 mm (from Z=0.0 to Z=24.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02168", "images": ["images/Shaft_02168.png", "detail_png/Shaft_02168_length.png", "detail_png/Shaft_02168_diam.png", "detail_png/Shaft_02168_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 104.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 74.0 mm (from Z=0.0 to Z=74.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.6 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02115", "images": ["images/Shaft_02115.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø67.8 mm and length at least 89.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.2 mm over length 35.7 mm (from Z=0.0 to Z=70.7).\n9. Finish turn diameter Ø42.9 mm over length 35.0 mm (from Z=0.0 to Z=35.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00492", "images": ["images/Shaft_00492.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.5 mm and length at least 203.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 40.0 mm (from Z=0.0 to Z=40.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.4 mm over length 44.9 mm (from Z=0.0 to Z=158.7).\n10. Finish turn diameter Ø30.0 mm over length 113.8 mm (from Z=0.0 to Z=113.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02725", "images": ["images/Shaft_02725.png", "detail_png/Shaft_02725_length.png", "detail_png/Shaft_02725_diam.png", "detail_png/Shaft_02725_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 275.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 214.2 mm (from Z=0.0 to Z=214.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.5 mm over length 56.4 mm (from Z=0.0 to Z=56.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03183", "images": ["images/Shaft_03183.png", "detail_png/Shaft_03183_length.png", "detail_png/Shaft_03183_diam.png", "detail_png/Shaft_03183_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.4 mm and length at least 123.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.4 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 36.3 mm (from Z=0.0 to Z=96.3).\n9. Finish turn diameter Ø30.0 mm over length 60.0 mm (from Z=0.0 to Z=60.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04690", "images": ["images/Shaft_04690.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø41.4 mm and length at least 316.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 52.1 mm (from Z=0.0 to Z=52.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 259.7 mm (from Z=0.0 to Z=259.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04704", "images": ["images/Shaft_04704.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.4 mm and length at least 232.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 40.9 mm (from Z=0.0 to Z=40.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 186.4 mm (from Z=0.0 to Z=186.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02271", "images": ["images/Shaft_02271.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 91.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 73.4 mm (from Z=0.0 to Z=73.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.8 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00606", "images": ["images/Shaft_00606.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 205.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 100.5 mm (from Z=0.0 to Z=100.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.8 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01326", "images": ["images/Shaft_01326.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.9 mm and length at least 116.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 22.3 mm (from Z=0.0 to Z=22.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.4 mm over length 7.9 mm (from Z=0.0 to Z=89.4).\n9. Finish turn diameter Ø30.0 mm over length 81.5 mm (from Z=0.0 to Z=81.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02108", "images": ["images/Shaft_02108.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.2 mm and length at least 171.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.2 mm over length 8.6 mm (from Z=0.0 to Z=8.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.6 mm over length 26.2 mm (from Z=0.0 to Z=158.0).\n9. Finish turn diameter Ø37.2 mm over length 66.7 mm (from Z=0.0 to Z=131.8).\n10. Finish turn diameter Ø30.0 mm over length 65.1 mm (from Z=0.0 to Z=65.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02649", "images": ["images/Shaft_02649.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø63.1 mm and length at least 178.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.1 mm over length 25.5 mm (from Z=0.0 to Z=25.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.0 mm over length 71.3 mm (from Z=0.0 to Z=147.7).\n9. Finish turn diameter Ø30.0 mm over length 76.4 mm (from Z=0.0 to Z=76.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03497", "images": ["images/Shaft_03497.png", "detail_png/Shaft_03497_length.png", "detail_png/Shaft_03497_diam.png", "detail_png/Shaft_03497_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 135.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 117.4 mm (from Z=0.0 to Z=117.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.4 mm over length 13.3 mm (from Z=0.0 to Z=13.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02264", "images": ["images/Shaft_02264.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø77.9 mm and length at least 89.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.9 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 9.3 mm (from Z=0.0 to Z=56.4).\n9. Finish turn diameter Ø41.9 mm over length 9.7 mm (from Z=0.0 to Z=47.1).\n10. Finish turn diameter Ø30.0 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03714", "images": ["images/Shaft_03714.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.9 mm and length at least 168.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.9 mm over length 16.5 mm (from Z=0.0 to Z=16.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 61.9 mm (from Z=0.0 to Z=147.1).\n9. Finish turn diameter Ø48.4 mm over length 26.9 mm (from Z=0.0 to Z=85.2).\n10. Finish turn diameter Ø40.1 mm over length 19.5 mm (from Z=0.0 to Z=58.3).\n11. Finish turn diameter Ø30.0 mm over length 38.8 mm (from Z=0.0 to Z=38.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00620", "images": ["images/Shaft_00620.png", "detail_png/Shaft_00620_length.png", "detail_png/Shaft_00620_diam.png", "detail_png/Shaft_00620_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 68.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 45.3 mm (from Z=0.0 to Z=45.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø18.6 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03825", "images": ["images/Shaft_03825.png", "detail_png/Shaft_03825_length.png", "detail_png/Shaft_03825_diam.png", "detail_png/Shaft_03825_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.5 mm and length at least 241.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.5 mm over length 32.2 mm (from Z=0.0 to Z=32.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 203.8 mm (from Z=0.0 to Z=203.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04610", "images": ["images/Shaft_04610.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø61.8 mm and length at least 80.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø59.8 mm over length 6.0 mm (from Z=0.0 to Z=6.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø59.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.3 mm over length 17.1 mm (from Z=0.0 to Z=69.7).\n9. Finish turn diameter Ø30.0 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02075", "images": ["images/Shaft_02075.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.2 mm and length at least 276.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.2 mm over length 55.2 mm (from Z=0.0 to Z=55.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.8 mm over length 65.1 mm (from Z=0.0 to Z=216.6).\n10. Finish turn diameter Ø30.0 mm over length 151.5 mm (from Z=0.0 to Z=151.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01509", "images": ["images/Shaft_01509.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 72.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 48.4 mm (from Z=0.0 to Z=48.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø26.1 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00908", "images": ["images/Shaft_00908.png", "detail_png/Shaft_00908_length.png", "detail_png/Shaft_00908_diam.png", "detail_png/Shaft_00908_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.9 mm and length at least 112.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.9 mm over length 22.8 mm (from Z=0.0 to Z=22.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.6 mm over length 8.9 mm (from Z=0.0 to Z=84.5).\n9. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01513", "images": ["images/Shaft_01513.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø48.9 mm and length at least 243.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.9 mm over length 59.8 mm (from Z=0.0 to Z=59.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.5 mm over length 11.9 mm (from Z=0.0 to Z=179.1).\n10. Finish turn diameter Ø30.0 mm over length 167.2 mm (from Z=0.0 to Z=167.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03079", "images": ["images/Shaft_03079.png", "detail_png/Shaft_03079_length.png", "detail_png/Shaft_03079_diam.png", "detail_png/Shaft_03079_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 214.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 178.8 mm (from Z=0.0 to Z=178.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.5 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01064", "images": ["images/Shaft_01064.png", "detail_png/Shaft_01064_length.png", "detail_png/Shaft_01064_diam.png", "detail_png/Shaft_01064_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.5 mm and length at least 122.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.5 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.8 mm over length 29.9 mm (from Z=0.0 to Z=95.9).\n9. Finish turn diameter Ø30.0 mm over length 66.0 mm (from Z=0.0 to Z=66.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00707", "images": ["images/Shaft_00707.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.5 mm and length at least 187.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.5 mm over length 10.5 mm (from Z=0.0 to Z=10.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.0 mm over length 28.9 mm (from Z=0.0 to Z=172.3).\n9. Finish turn diameter Ø56.9 mm over length 87.3 mm (from Z=0.0 to Z=143.4).\n10. Finish turn diameter Ø44.1 mm over length 56.1 mm (from Z=0.0 to Z=56.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00982", "images": ["images/Shaft_00982.png", "detail_png/Shaft_00982_length.png", "detail_png/Shaft_00982_diam.png", "detail_png/Shaft_00982_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.9 mm and length at least 145.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.9 mm over length 35.7 mm (from Z=0.0 to Z=35.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø68.8 mm over length 33.4 mm (from Z=0.0 to Z=104.6).\n9. Finish turn diameter Ø54.4 mm over length 29.8 mm (from Z=0.0 to Z=71.2).\n10. Finish turn diameter Ø39.2 mm over length 41.4 mm (from Z=0.0 to Z=41.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00997", "images": ["images/Shaft_00997.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø74.8 mm and length at least 292.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.8 mm over length 96.4 mm (from Z=0.0 to Z=96.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 77.3 mm (from Z=0.0 to Z=190.9).\n10. Finish turn diameter Ø47.1 mm over length 77.6 mm (from Z=0.0 to Z=113.6).\n11. Finish turn diameter Ø38.0 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01776", "images": ["images/Shaft_01776.png", "detail_png/Shaft_01776_length.png", "detail_png/Shaft_01776_diam.png", "detail_png/Shaft_01776_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 306.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 145.6 mm (from Z=0.0 to Z=145.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.1 mm over length 155.5 mm (from Z=0.0 to Z=155.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00465", "images": ["images/Shaft_00465.png", "detail_png/Shaft_00465_length.png", "detail_png/Shaft_00465_diam.png", "detail_png/Shaft_00465_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.5 mm and length at least 209.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 100.8 mm (from Z=0.0 to Z=100.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø68.4 mm over length 22.4 mm (from Z=0.0 to Z=104.1).\n10. Finish turn diameter Ø57.9 mm over length 12.2 mm (from Z=0.0 to Z=81.7).\n11. Finish turn diameter Ø51.5 mm over length 52.4 mm (from Z=0.0 to Z=69.5).\n12. Finish turn diameter Ø31.5 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} diff --git a/val.jsonl b/val.jsonl new file mode 100644 index 0000000000000000000000000000000000000000..7a735b2243d220b885c1e2461546cabadc2f4db0 --- /dev/null +++ b/val.jsonl @@ -0,0 +1,250 @@ +{"id": "Shaft_00753", "images": ["images/Shaft_00753.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.8 mm and length at least 207.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.8 mm over length 71.0 mm (from Z=0.0 to Z=71.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.5 mm over length 24.3 mm (from Z=0.0 to Z=131.9).\n10. Finish turn diameter Ø30.0 mm over length 107.6 mm (from Z=0.0 to Z=107.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00194", "images": ["images/Shaft_00194.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 191.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 116.8 mm (from Z=0.0 to Z=116.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 69.4 mm (from Z=0.0 to Z=69.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00278", "images": ["images/Shaft_00278.png", "detail_png/Shaft_00278_length.png", "detail_png/Shaft_00278_diam.png", "detail_png/Shaft_00278_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø43.1 mm and length at least 256.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.1 mm over length 44.9 mm (from Z=0.0 to Z=44.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.6 mm over length 58.2 mm (from Z=0.0 to Z=206.6).\n10. Finish turn diameter Ø30.0 mm over length 148.4 mm (from Z=0.0 to Z=148.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01581", "images": ["images/Shaft_01581.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø65.1 mm and length at least 122.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.1 mm over length 8.4 mm (from Z=0.0 to Z=8.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.0 mm over length 38.1 mm (from Z=0.0 to Z=108.9).\n9. Finish turn diameter Ø37.9 mm over length 46.6 mm (from Z=0.0 to Z=70.8).\n10. Finish turn diameter Ø30.0 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02063", "images": ["images/Shaft_02063.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.2 mm and length at least 149.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 33.3 mm (from Z=0.0 to Z=33.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.4 mm over length 48.0 mm (from Z=0.0 to Z=111.3).\n9. Finish turn diameter Ø30.0 mm over length 63.3 mm (from Z=0.0 to Z=63.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04836", "images": ["images/Shaft_04836.png", "detail_png/Shaft_04836_length.png", "detail_png/Shaft_04836_diam.png", "detail_png/Shaft_04836_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.7 mm and length at least 255.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 202.3 mm (from Z=0.0 to Z=202.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01797", "images": ["images/Shaft_01797.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.2 mm and length at least 257.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.2 mm over length 178.2 mm (from Z=0.0 to Z=178.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.2 mm over length 21.0 mm (from Z=0.0 to Z=74.1).\n10. Finish turn diameter Ø30.0 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04783", "images": ["images/Shaft_04783.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 155.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 103.2 mm (from Z=0.0 to Z=103.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø20.1 mm over length 47.5 mm (from Z=0.0 to Z=47.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03653", "images": ["images/Shaft_03653.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.0 mm and length at least 152.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.0 mm over length 15.0 mm (from Z=0.0 to Z=15.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.6 mm over length 26.4 mm (from Z=0.0 to Z=132.0).\n9. Finish turn diameter Ø54.1 mm over length 28.5 mm (from Z=0.0 to Z=105.6).\n10. Finish turn diameter Ø46.1 mm over length 30.3 mm (from Z=0.0 to Z=77.1).\n11. Finish turn diameter Ø30.7 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00851", "images": ["images/Shaft_00851.png", "detail_png/Shaft_00851_length.png", "detail_png/Shaft_00851_diam.png", "detail_png/Shaft_00851_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.3 mm and length at least 68.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.3 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.5 mm over length 5.0 mm (from Z=0.0 to Z=42.1).\n9. Finish turn diameter Ø30.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04302", "images": ["images/Shaft_04302.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.4 mm and length at least 154.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø33.1 mm over length 33.4 mm (from Z=0.0 to Z=132.5).\n10. Finish turn diameter Ø30.0 mm over length 99.1 mm (from Z=0.0 to Z=99.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00800", "images": ["images/Shaft_00800.png", "detail_png/Shaft_00800_length.png", "detail_png/Shaft_00800_diam.png", "detail_png/Shaft_00800_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 133.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 121.4 mm (from Z=0.0 to Z=121.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.0 mm over length 7.3 mm (from Z=0.0 to Z=7.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03368", "images": ["images/Shaft_03368.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.8 mm and length at least 189.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.8 mm over length 33.4 mm (from Z=0.0 to Z=33.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø55.4 mm over length 65.0 mm (from Z=0.0 to Z=151.3).\n9. Finish turn diameter Ø41.7 mm over length 76.4 mm (from Z=0.0 to Z=86.3).\n10. Finish turn diameter Ø30.0 mm over length 9.9 mm (from Z=0.0 to Z=9.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04542", "images": ["images/Shaft_04542.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø34.6 mm and length at least 133.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.6 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.1 mm (from Z=0.0 to Z=99.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00556", "images": ["images/Shaft_00556.png", "detail_png/Shaft_00556_length.png", "detail_png/Shaft_00556_diam.png", "detail_png/Shaft_00556_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 133.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 100.0 mm (from Z=0.0 to Z=100.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.7 mm over length 28.9 mm (from Z=0.0 to Z=28.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00069", "images": ["images/Shaft_00069.png", "detail_png/Shaft_00069_length.png", "detail_png/Shaft_00069_diam.png", "detail_png/Shaft_00069_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.9 mm and length at least 111.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 28.4 mm (from Z=0.0 to Z=28.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00086", "images": ["images/Shaft_00086.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.1 mm and length at least 202.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.1 mm over length 34.5 mm (from Z=0.0 to Z=34.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.7 mm over length 50.5 mm (from Z=0.0 to Z=163.4).\n10. Finish turn diameter Ø36.3 mm over length 23.5 mm (from Z=0.0 to Z=112.9).\n11. Finish turn diameter Ø30.0 mm over length 89.4 mm (from Z=0.0 to Z=89.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04486", "images": ["images/Shaft_04486.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø44.7 mm and length at least 209.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.7 mm over length 54.8 mm (from Z=0.0 to Z=54.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.4 mm over length 74.9 mm (from Z=0.0 to Z=149.2).\n10. Finish turn diameter Ø30.0 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02566", "images": ["images/Shaft_02566.png", "detail_png/Shaft_02566_length.png", "detail_png/Shaft_02566_diam.png", "detail_png/Shaft_02566_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø35.8 mm and length at least 127.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.8 mm over length 32.5 mm (from Z=0.0 to Z=32.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 89.9 mm (from Z=0.0 to Z=89.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04993", "images": ["images/Shaft_04993.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.9 mm and length at least 198.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.9 mm over length 73.9 mm (from Z=0.0 to Z=73.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 119.7 mm (from Z=0.0 to Z=119.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02764", "images": ["images/Shaft_02764.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø37.6 mm and length at least 150.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.6 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 99.1 mm (from Z=0.0 to Z=99.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04259", "images": ["images/Shaft_04259.png", "detail_png/Shaft_04259_length.png", "detail_png/Shaft_04259_diam.png", "detail_png/Shaft_04259_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø57.9 mm and length at least 132.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.9 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø47.2 mm over length 57.9 mm (from Z=0.0 to Z=98.7).\n9. Finish turn diameter Ø44.1 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01596", "images": ["images/Shaft_01596.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.4 mm and length at least 117.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.4 mm over length 22.4 mm (from Z=0.0 to Z=22.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 5.2 mm (from Z=0.0 to Z=89.9).\n9. Finish turn diameter Ø47.4 mm over length 27.6 mm (from Z=0.0 to Z=84.7).\n10. Finish turn diameter Ø30.2 mm over length 23.3 mm (from Z=0.0 to Z=57.1).\n11. Finish turn diameter Ø30.0 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01980", "images": ["images/Shaft_01980.png", "detail_png/Shaft_01980_length.png", "detail_png/Shaft_01980_diam.png", "detail_png/Shaft_01980_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.8 mm and length at least 169.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 31.6 mm (from Z=0.0 to Z=31.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.3 mm over length 44.6 mm (from Z=0.0 to Z=132.4).\n9. Finish turn diameter Ø35.9 mm over length 5.7 mm (from Z=0.0 to Z=87.8).\n10. Finish turn diameter Ø30.0 mm over length 82.1 mm (from Z=0.0 to Z=82.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03777", "images": ["images/Shaft_03777.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.4 mm and length at least 247.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.4 mm over length 55.5 mm (from Z=0.0 to Z=55.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø55.5 mm over length 103.5 mm (from Z=0.0 to Z=187.1).\n10. Finish turn diameter Ø38.7 mm over length 83.6 mm (from Z=0.0 to Z=83.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03204", "images": ["images/Shaft_03204.png", "detail_png/Shaft_03204_length.png", "detail_png/Shaft_03204_diam.png", "detail_png/Shaft_03204_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.0 mm and length at least 272.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 17.8 mm (from Z=0.0 to Z=17.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.3 mm over length 106.3 mm (from Z=0.0 to Z=249.4).\n10. Finish turn diameter Ø51.4 mm over length 94.4 mm (from Z=0.0 to Z=143.1).\n11. Finish turn diameter Ø32.1 mm over length 48.7 mm (from Z=0.0 to Z=48.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02091", "images": ["images/Shaft_02091.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.5 mm and length at least 157.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.5 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.5 mm over length 35.4 mm (from Z=0.0 to Z=114.4).\n9. Finish turn diameter Ø30.0 mm over length 79.0 mm (from Z=0.0 to Z=79.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00805", "images": ["images/Shaft_00805.png", "detail_png/Shaft_00805_length.png", "detail_png/Shaft_00805_diam.png", "detail_png/Shaft_00805_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.5 mm and length at least 280.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.5 mm over length 37.9 mm (from Z=0.0 to Z=37.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 53.4 mm (from Z=0.0 to Z=237.4).\n10. Finish turn diameter Ø30.0 mm over length 184.0 mm (from Z=0.0 to Z=184.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02187", "images": ["images/Shaft_02187.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.5 mm and length at least 86.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.5 mm over length 6.4 mm (from Z=0.0 to Z=6.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.0 mm over length 30.1 mm (from Z=0.0 to Z=75.2).\n9. Finish turn diameter Ø30.0 mm over length 45.1 mm (from Z=0.0 to Z=45.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02214", "images": ["images/Shaft_02214.png", "detail_png/Shaft_02214_length.png", "detail_png/Shaft_02214_diam.png", "detail_png/Shaft_02214_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø63.8 mm and length at least 144.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.8 mm over length 24.2 mm (from Z=0.0 to Z=24.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø54.9 mm over length 42.2 mm (from Z=0.0 to Z=114.8).\n9. Finish turn diameter Ø38.0 mm over length 17.9 mm (from Z=0.0 to Z=72.6).\n10. Finish turn diameter Ø33.9 mm over length 43.4 mm (from Z=0.0 to Z=54.7).\n11. Finish turn diameter Ø30.0 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02744", "images": ["images/Shaft_02744.png", "detail_png/Shaft_02744_length.png", "detail_png/Shaft_02744_diam.png", "detail_png/Shaft_02744_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 118.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 99.6 mm (from Z=0.0 to Z=99.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 14.1 mm (from Z=0.0 to Z=14.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04852", "images": ["images/Shaft_04852.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø57.7 mm and length at least 91.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø55.7 mm over length 8.0 mm (from Z=0.0 to Z=8.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø55.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.8 mm over length 29.7 mm (from Z=0.0 to Z=78.5).\n9. Finish turn diameter Ø31.0 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03537", "images": ["images/Shaft_03537.png", "detail_png/Shaft_03537_length.png", "detail_png/Shaft_03537_diam.png", "detail_png/Shaft_03537_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.5 mm and length at least 315.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.5 mm over length 24.1 mm (from Z=0.0 to Z=24.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.2 mm over length 27.4 mm (from Z=0.0 to Z=286.0).\n10. Finish turn diameter Ø31.5 mm over length 89.3 mm (from Z=0.0 to Z=258.6).\n11. Finish turn diameter Ø30.0 mm over length 169.3 mm (from Z=0.0 to Z=169.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02898", "images": ["images/Shaft_02898.png", "detail_png/Shaft_02898_length.png", "detail_png/Shaft_02898_diam.png", "detail_png/Shaft_02898_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.9 mm and length at least 268.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.9 mm over length 45.1 mm (from Z=0.0 to Z=45.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 29.9 mm (from Z=0.0 to Z=218.0).\n10. Finish turn diameter Ø32.7 mm over length 62.4 mm (from Z=0.0 to Z=188.1).\n11. Finish turn diameter Ø30.0 mm over length 125.7 mm (from Z=0.0 to Z=125.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04722", "images": ["images/Shaft_04722.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø42.8 mm and length at least 90.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.8 mm over length 6.2 mm (from Z=0.0 to Z=6.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 79.5 mm (from Z=0.0 to Z=79.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00797", "images": ["images/Shaft_00797.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø41.4 mm and length at least 307.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.4 mm over length 68.3 mm (from Z=0.0 to Z=68.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø32.7 mm over length 18.1 mm (from Z=0.0 to Z=233.9).\n10. Finish turn diameter Ø30.0 mm over length 215.8 mm (from Z=0.0 to Z=215.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00336", "images": ["images/Shaft_00336.png", "detail_png/Shaft_00336_length.png", "detail_png/Shaft_00336_diam.png", "detail_png/Shaft_00336_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.3 mm and length at least 68.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø37.0 mm over length 8.7 mm (from Z=0.0 to Z=50.2).\n9. Finish turn diameter Ø30.0 mm over length 41.5 mm (from Z=0.0 to Z=41.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04343", "images": ["images/Shaft_04343.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø46.3 mm and length at least 166.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 65.9 mm (from Z=0.0 to Z=65.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.3 mm over length 79.6 mm (from Z=0.0 to Z=95.3).\n9. Finish turn diameter Ø30.0 mm over length 15.7 mm (from Z=0.0 to Z=15.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02586", "images": ["images/Shaft_02586.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.4 mm and length at least 279.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.4 mm over length 51.0 mm (from Z=0.0 to Z=51.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø34.0 mm over length 95.2 mm (from Z=0.0 to Z=223.5).\n10. Finish turn diameter Ø30.0 mm over length 128.3 mm (from Z=0.0 to Z=128.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03129", "images": ["images/Shaft_03129.png", "detail_png/Shaft_03129_length.png", "detail_png/Shaft_03129_diam.png", "detail_png/Shaft_03129_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.5 mm and length at least 316.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 85.3 mm (from Z=0.0 to Z=85.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 77.5 mm (from Z=0.0 to Z=226.3).\n10. Finish turn diameter Ø43.8 mm over length 46.6 mm (from Z=0.0 to Z=148.8).\n11. Finish turn diameter Ø30.0 mm over length 102.2 mm (from Z=0.0 to Z=102.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03676", "images": ["images/Shaft_03676.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø70.4 mm and length at least 263.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.4 mm over length 99.9 mm (from Z=0.0 to Z=99.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.0 mm over length 45.5 mm (from Z=0.0 to Z=158.8).\n10. Finish turn diameter Ø52.7 mm over length 96.6 mm (from Z=0.0 to Z=113.3).\n11. Finish turn diameter Ø41.1 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02365", "images": ["images/Shaft_02365.png", "detail_png/Shaft_02365_length.png", "detail_png/Shaft_02365_diam.png", "detail_png/Shaft_02365_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.4 mm and length at least 323.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.4 mm over length 189.1 mm (from Z=0.0 to Z=189.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.9 mm over length 91.4 mm (from Z=0.0 to Z=129.0).\n10. Finish turn diameter Ø45.1 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00097", "images": ["images/Shaft_00097.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.6 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.6 mm over length 40.6 mm (from Z=0.0 to Z=40.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.2 mm over length 31.7 mm (from Z=0.0 to Z=160.8).\n10. Finish turn diameter Ø30.0 mm over length 129.1 mm (from Z=0.0 to Z=129.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04712", "images": ["images/Shaft_04712.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø47.8 mm and length at least 95.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.8 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.6 mm over length 8.8 mm (from Z=0.0 to Z=70.3).\n9. Finish turn diameter Ø30.0 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04345", "images": ["images/Shaft_04345.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 273.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 227.2 mm (from Z=0.0 to Z=227.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.2 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01189", "images": ["images/Shaft_01189.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.2 mm and length at least 176.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.3 mm over length 23.7 mm (from Z=0.0 to Z=121.9).\n10. Finish turn diameter Ø30.0 mm over length 98.2 mm (from Z=0.0 to Z=98.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02151", "images": ["images/Shaft_02151.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø78.4 mm and length at least 287.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.4 mm over length 85.9 mm (from Z=0.0 to Z=85.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.8 mm over length 52.5 mm (from Z=0.0 to Z=196.3).\n10. Finish turn diameter Ø42.9 mm over length 64.5 mm (from Z=0.0 to Z=143.8).\n11. Finish turn diameter Ø30.4 mm over length 19.9 mm (from Z=0.0 to Z=79.3).\n12. Finish turn diameter Ø30.0 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04953", "images": ["images/Shaft_04953.png", "detail_png/Shaft_04953_length.png", "detail_png/Shaft_04953_diam.png", "detail_png/Shaft_04953_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø47.3 mm and length at least 78.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.3 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.6 mm over length 18.2 mm (from Z=0.0 to Z=68.5).\n9. Finish turn diameter Ø30.0 mm over length 50.3 mm (from Z=0.0 to Z=50.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03195", "images": ["images/Shaft_03195.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.1 mm and length at least 313.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.1 mm over length 109.9 mm (from Z=0.0 to Z=109.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.2 mm over length 108.1 mm (from Z=0.0 to Z=198.1).\n10. Finish turn diameter Ø34.4 mm over length 90.0 mm (from Z=0.0 to Z=90.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03111", "images": ["images/Shaft_03111.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø70.2 mm and length at least 250.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø51.1 mm over length 89.6 mm (from Z=0.0 to Z=184.7).\n10. Finish turn diameter Ø33.0 mm over length 33.5 mm (from Z=0.0 to Z=95.1).\n11. Finish turn diameter Ø30.0 mm over length 61.6 mm (from Z=0.0 to Z=61.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01914", "images": ["images/Shaft_01914.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.4 mm and length at least 152.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.4 mm over length 29.1 mm (from Z=0.0 to Z=29.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.0 mm over length 42.9 mm (from Z=0.0 to Z=118.7).\n9. Finish turn diameter Ø30.0 mm over length 75.8 mm (from Z=0.0 to Z=75.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04362", "images": ["images/Shaft_04362.png", "detail_png/Shaft_04362_length.png", "detail_png/Shaft_04362_diam.png", "detail_png/Shaft_04362_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø59.4 mm and length at least 115.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.4 mm over length 20.9 mm (from Z=0.0 to Z=20.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.1 mm over length 17.5 mm (from Z=0.0 to Z=90.0).\n9. Finish turn diameter Ø45.9 mm over length 19.4 mm (from Z=0.0 to Z=72.5).\n10. Finish turn diameter Ø37.6 mm over length 25.0 mm (from Z=0.0 to Z=53.1).\n11. Finish turn diameter Ø32.4 mm over length 28.1 mm (from Z=0.0 to Z=28.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04554", "images": ["images/Shaft_04554.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.3 mm and length at least 91.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.3 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.7 mm over length 7.3 mm (from Z=0.0 to Z=74.0).\n9. Finish turn diameter Ø53.2 mm over length 16.9 mm (from Z=0.0 to Z=66.7).\n10. Finish turn diameter Ø42.8 mm over length 19.2 mm (from Z=0.0 to Z=49.8).\n11. Finish turn diameter Ø30.0 mm over length 30.6 mm (from Z=0.0 to Z=30.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02468", "images": ["images/Shaft_02468.png", "detail_png/Shaft_02468_length.png", "detail_png/Shaft_02468_diam.png", "detail_png/Shaft_02468_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 89.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 61.5 mm (from Z=0.0 to Z=61.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø21.7 mm over length 23.3 mm (from Z=0.0 to Z=23.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03901", "images": ["images/Shaft_03901.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø72.4 mm and length at least 78.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.4 mm over length 36.3 mm (from Z=0.0 to Z=36.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.2 mm over length 20.4 mm (from Z=0.0 to Z=37.1).\n9. Finish turn diameter Ø53.2 mm over length 16.7 mm (from Z=0.0 to Z=16.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03266", "images": ["images/Shaft_03266.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.7 mm and length at least 75.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.7 mm over length 24.9 mm (from Z=0.0 to Z=24.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.9 mm over length 29.6 mm (from Z=0.0 to Z=45.4).\n9. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03801", "images": ["images/Shaft_03801.png", "detail_png/Shaft_03801_length.png", "detail_png/Shaft_03801_diam.png", "detail_png/Shaft_03801_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø68.1 mm and length at least 230.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.1 mm over length 40.8 mm (from Z=0.0 to Z=40.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.2 mm over length 63.8 mm (from Z=0.0 to Z=184.7).\n10. Finish turn diameter Ø43.0 mm over length 120.9 mm (from Z=0.0 to Z=120.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04608", "images": ["images/Shaft_04608.png", "detail_png/Shaft_04608_length.png", "detail_png/Shaft_04608_diam.png", "detail_png/Shaft_04608_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.5 mm and length at least 155.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.4 mm over length 48.9 mm (from Z=0.0 to Z=111.2).\n9. Finish turn diameter Ø43.4 mm over length 56.2 mm (from Z=0.0 to Z=62.3).\n10. Finish turn diameter Ø33.9 mm over length 6.1 mm (from Z=0.0 to Z=6.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00430", "images": ["images/Shaft_00430.png", "detail_png/Shaft_00430_length.png", "detail_png/Shaft_00430_diam.png", "detail_png/Shaft_00430_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 137.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 123.1 mm (from Z=0.0 to Z=123.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø21.8 mm over length 9.4 mm (from Z=0.0 to Z=9.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00950", "images": ["images/Shaft_00950.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø67.4 mm and length at least 212.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.4 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 58.9 mm (from Z=0.0 to Z=189.1).\n10. Finish turn diameter Ø55.0 mm over length 50.2 mm (from Z=0.0 to Z=130.2).\n11. Finish turn diameter Ø39.8 mm over length 26.9 mm (from Z=0.0 to Z=80.0).\n12. Finish turn diameter Ø33.0 mm over length 53.1 mm (from Z=0.0 to Z=53.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02165", "images": ["images/Shaft_02165.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.5 mm and length at least 118.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.5 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.6 mm over length 30.3 mm (from Z=0.0 to Z=57.8).\n9. Finish turn diameter Ø55.0 mm over length 27.5 mm (from Z=0.0 to Z=27.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00445", "images": ["images/Shaft_00445.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.8 mm and length at least 139.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.8 mm over length 66.6 mm (from Z=0.0 to Z=66.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.1 mm over length 50.6 mm (from Z=0.0 to Z=67.8).\n9. Finish turn diameter Ø38.3 mm over length 17.2 mm (from Z=0.0 to Z=17.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02826", "images": ["images/Shaft_02826.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø79.1 mm and length at least 180.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.1 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø73.6 mm over length 22.1 mm (from Z=0.0 to Z=146.0).\n9. Finish turn diameter Ø63.1 mm over length 52.4 mm (from Z=0.0 to Z=123.9).\n10. Finish turn diameter Ø47.0 mm over length 37.7 mm (from Z=0.0 to Z=71.5).\n11. Finish turn diameter Ø32.7 mm over length 12.1 mm (from Z=0.0 to Z=33.8).\n12. Finish turn diameter Ø30.0 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01727", "images": ["images/Shaft_01727.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø52.8 mm and length at least 250.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.8 mm over length 81.1 mm (from Z=0.0 to Z=81.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.7 mm over length 117.0 mm (from Z=0.0 to Z=164.0).\n10. Finish turn diameter Ø30.0 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01370", "images": ["images/Shaft_01370.png", "detail_png/Shaft_01370_length.png", "detail_png/Shaft_01370_diam.png", "detail_png/Shaft_01370_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.5 mm and length at least 68.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.5 mm over length 21.9 mm (from Z=0.0 to Z=21.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.0 mm over length 23.6 mm (from Z=0.0 to Z=41.1).\n9. Finish turn diameter Ø30.0 mm over length 17.5 mm (from Z=0.0 to Z=17.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03605", "images": ["images/Shaft_03605.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 165.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 98.2 mm (from Z=0.0 to Z=98.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.4 mm over length 62.7 mm (from Z=0.0 to Z=62.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01949", "images": ["images/Shaft_01949.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.2 mm and length at least 90.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 6.4 mm (from Z=0.0 to Z=6.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 78.6 mm (from Z=0.0 to Z=78.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03138", "images": ["images/Shaft_03138.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø59.7 mm and length at least 321.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.7 mm over length 216.3 mm (from Z=0.0 to Z=216.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 35.9 mm (from Z=0.0 to Z=100.0).\n10. Finish turn diameter Ø33.0 mm over length 64.1 mm (from Z=0.0 to Z=64.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03382", "images": ["images/Shaft_03382.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 136.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 78.3 mm (from Z=0.0 to Z=78.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø25.1 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04062", "images": ["images/Shaft_04062.png", "detail_png/Shaft_04062_length.png", "detail_png/Shaft_04062_diam.png", "detail_png/Shaft_04062_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø46.4 mm and length at least 175.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.4 mm over length 55.8 mm (from Z=0.0 to Z=55.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.8 mm over length 97.6 mm (from Z=0.0 to Z=114.7).\n9. Finish turn diameter Ø30.0 mm over length 17.1 mm (from Z=0.0 to Z=17.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04893", "images": ["images/Shaft_04893.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.3 mm and length at least 233.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.3 mm over length 70.0 mm (from Z=0.0 to Z=70.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.7 mm over length 16.5 mm (from Z=0.0 to Z=158.5).\n10. Finish turn diameter Ø39.7 mm over length 57.4 mm (from Z=0.0 to Z=142.0).\n11. Finish turn diameter Ø30.0 mm over length 84.6 mm (from Z=0.0 to Z=84.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01188", "images": ["images/Shaft_01188.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.7 mm and length at least 74.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.7 mm over length 12.3 mm (from Z=0.0 to Z=12.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00691", "images": ["images/Shaft_00691.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.3 mm and length at least 178.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 44.6 mm (from Z=0.0 to Z=44.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 129.2 mm (from Z=0.0 to Z=129.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02808", "images": ["images/Shaft_02808.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø34.2 mm and length at least 302.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.2 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 277.0 mm (from Z=0.0 to Z=277.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00271", "images": ["images/Shaft_00271.png", "detail_png/Shaft_00271_length.png", "detail_png/Shaft_00271_diam.png", "detail_png/Shaft_00271_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.2 mm and length at least 142.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.2 mm over length 53.8 mm (from Z=0.0 to Z=53.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.6 mm over length 27.1 mm (from Z=0.0 to Z=83.8).\n9. Finish turn diameter Ø30.0 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04320", "images": ["images/Shaft_04320.png", "detail_png/Shaft_04320_length.png", "detail_png/Shaft_04320_diam.png", "detail_png/Shaft_04320_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.5 mm and length at least 86.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 34.0 mm (from Z=0.0 to Z=34.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.5 mm over length 36.3 mm (from Z=0.0 to Z=47.3).\n9. Finish turn diameter Ø45.2 mm over length 11.0 mm (from Z=0.0 to Z=11.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01481", "images": ["images/Shaft_01481.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.8 mm and length at least 153.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.8 mm over length 13.9 mm (from Z=0.0 to Z=13.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.5 mm over length 30.7 mm (from Z=0.0 to Z=134.5).\n10. Finish turn diameter Ø30.0 mm over length 103.8 mm (from Z=0.0 to Z=103.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03972", "images": ["images/Shaft_03972.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø76.7 mm and length at least 279.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 141.2 mm (from Z=0.0 to Z=141.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.5 mm over length 74.7 mm (from Z=0.0 to Z=133.2).\n10. Finish turn diameter Ø48.2 mm over length 58.5 mm (from Z=0.0 to Z=58.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04749", "images": ["images/Shaft_04749.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø41.0 mm and length at least 275.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.0 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 204.9 mm (from Z=0.0 to Z=204.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02140", "images": ["images/Shaft_02140.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.4 mm and length at least 249.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.4 mm over length 21.1 mm (from Z=0.0 to Z=21.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.8 mm over length 63.8 mm (from Z=0.0 to Z=223.2).\n10. Finish turn diameter Ø30.0 mm over length 159.4 mm (from Z=0.0 to Z=159.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01436", "images": ["images/Shaft_01436.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.9 mm and length at least 300.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 138.6 mm (from Z=0.0 to Z=138.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.7 mm over length 34.1 mm (from Z=0.0 to Z=157.3).\n10. Finish turn diameter Ø51.1 mm over length 123.2 mm (from Z=0.0 to Z=123.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03029", "images": ["images/Shaft_03029.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.9 mm and length at least 294.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.9 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.8 mm over length 55.1 mm (from Z=0.0 to Z=268.1).\n10. Finish turn diameter Ø36.1 mm over length 48.0 mm (from Z=0.0 to Z=213.0).\n11. Finish turn diameter Ø30.0 mm over length 165.0 mm (from Z=0.0 to Z=165.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03658", "images": ["images/Shaft_03658.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.0 mm and length at least 209.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 70.6 mm (from Z=0.0 to Z=70.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.8 mm over length 63.3 mm (from Z=0.0 to Z=134.2).\n10. Finish turn diameter Ø43.4 mm over length 51.6 mm (from Z=0.0 to Z=70.9).\n11. Finish turn diameter Ø30.0 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01238", "images": ["images/Shaft_01238.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø40.5 mm and length at least 182.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.5 mm over length 94.0 mm (from Z=0.0 to Z=94.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 83.8 mm (from Z=0.0 to Z=83.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01430", "images": ["images/Shaft_01430.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.7 mm and length at least 268.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.7 mm over length 11.4 mm (from Z=0.0 to Z=11.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 252.1 mm (from Z=0.0 to Z=252.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00913", "images": ["images/Shaft_00913.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.9 mm and length at least 311.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.9 mm over length 61.7 mm (from Z=0.0 to Z=61.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.2 mm over length 58.6 mm (from Z=0.0 to Z=244.4).\n10. Finish turn diameter Ø30.0 mm over length 185.8 mm (from Z=0.0 to Z=185.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00116", "images": ["images/Shaft_00116.png", "detail_png/Shaft_00116_length.png", "detail_png/Shaft_00116_diam.png", "detail_png/Shaft_00116_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø39.0 mm and length at least 290.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.0 mm over length 14.3 mm (from Z=0.0 to Z=14.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 270.7 mm (from Z=0.0 to Z=270.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02104", "images": ["images/Shaft_02104.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø80.9 mm and length at least 108.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.9 mm over length 29.8 mm (from Z=0.0 to Z=29.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.7 mm over length 12.5 mm (from Z=0.0 to Z=73.2).\n9. Finish turn diameter Ø57.5 mm over length 48.0 mm (from Z=0.0 to Z=60.7).\n10. Finish turn diameter Ø51.3 mm over length 12.7 mm (from Z=0.0 to Z=12.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02254", "images": ["images/Shaft_02254.png", "detail_png/Shaft_02254_length.png", "detail_png/Shaft_02254_diam.png", "detail_png/Shaft_02254_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø71.3 mm and length at least 97.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø69.3 mm over length 37.6 mm (from Z=0.0 to Z=37.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø69.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø58.1 mm over length 7.7 mm (from Z=0.0 to Z=55.1).\n9. Finish turn diameter Ø52.4 mm over length 5.0 mm (from Z=0.0 to Z=47.4).\n10. Finish turn diameter Ø35.4 mm over length 42.4 mm (from Z=0.0 to Z=42.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02301", "images": ["images/Shaft_02301.png", "detail_png/Shaft_02301_length.png", "detail_png/Shaft_02301_diam.png", "detail_png/Shaft_02301_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 217.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 202.6 mm (from Z=0.0 to Z=202.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.4 mm over length 10.0 mm (from Z=0.0 to Z=10.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01085", "images": ["images/Shaft_01085.png", "detail_png/Shaft_01085_length.png", "detail_png/Shaft_01085_diam.png", "detail_png/Shaft_01085_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø36.4 mm and length at least 199.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.4 mm over length 26.8 mm (from Z=0.0 to Z=26.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.1 mm over length 67.0 mm (from Z=0.0 to Z=167.5).\n10. Finish turn diameter Ø30.0 mm over length 100.5 mm (from Z=0.0 to Z=100.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02064", "images": ["images/Shaft_02064.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 168.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 121.9 mm (from Z=0.0 to Z=121.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.9 mm over length 41.6 mm (from Z=0.0 to Z=41.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02276", "images": ["images/Shaft_02276.png", "detail_png/Shaft_02276_length.png", "detail_png/Shaft_02276_diam.png", "detail_png/Shaft_02276_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø60.6 mm and length at least 270.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.6 mm over length 22.1 mm (from Z=0.0 to Z=22.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.7 mm over length 82.1 mm (from Z=0.0 to Z=243.8).\n10. Finish turn diameter Ø30.0 mm over length 161.7 mm (from Z=0.0 to Z=161.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00629", "images": ["images/Shaft_00629.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø42.2 mm and length at least 151.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.2 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.8 mm (from Z=0.0 to Z=111.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04141", "images": ["images/Shaft_04141.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø66.7 mm and length at least 130.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.7 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø51.7 mm over length 33.5 mm (from Z=0.0 to Z=85.4).\n9. Finish turn diameter Ø41.1 mm over length 36.1 mm (from Z=0.0 to Z=51.9).\n10. Finish turn diameter Ø30.0 mm over length 15.8 mm (from Z=0.0 to Z=15.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01038", "images": ["images/Shaft_01038.png", "detail_png/Shaft_01038_length.png", "detail_png/Shaft_01038_diam.png", "detail_png/Shaft_01038_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.8 mm and length at least 98.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.8 mm over length 36.4 mm (from Z=0.0 to Z=36.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.0 mm over length 16.9 mm (from Z=0.0 to Z=57.0).\n9. Finish turn diameter Ø48.2 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00675", "images": ["images/Shaft_00675.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.4 mm and length at least 83.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø31.6 mm over length 14.0 mm (from Z=0.0 to Z=66.7).\n9. Finish turn diameter Ø30.0 mm over length 52.7 mm (from Z=0.0 to Z=52.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03971", "images": ["images/Shaft_03971.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.0 mm and length at least 205.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.0 mm over length 58.6 mm (from Z=0.0 to Z=58.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.9 mm over length 48.8 mm (from Z=0.0 to Z=141.8).\n10. Finish turn diameter Ø32.6 mm over length 47.4 mm (from Z=0.0 to Z=93.0).\n11. Finish turn diameter Ø30.0 mm over length 45.6 mm (from Z=0.0 to Z=45.6).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02349", "images": ["images/Shaft_02349.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø45.8 mm and length at least 324.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.8 mm over length 64.9 mm (from Z=0.0 to Z=64.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø31.4 mm over length 75.4 mm (from Z=0.0 to Z=254.5).\n10. Finish turn diameter Ø30.0 mm over length 179.1 mm (from Z=0.0 to Z=179.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00223", "images": ["images/Shaft_00223.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø34.9 mm and length at least 143.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø32.9 mm over length 25.2 mm (from Z=0.0 to Z=25.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø32.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 113.4 mm (from Z=0.0 to Z=113.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02390", "images": ["images/Shaft_02390.png", "detail_png/Shaft_02390_length.png", "detail_png/Shaft_02390_diam.png", "detail_png/Shaft_02390_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø33.6 mm and length at least 92.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.6 mm over length 39.1 mm (from Z=0.0 to Z=39.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 48.3 mm (from Z=0.0 to Z=48.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00422", "images": ["images/Shaft_00422.png", "detail_png/Shaft_00422_length.png", "detail_png/Shaft_00422_diam.png", "detail_png/Shaft_00422_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.5 mm and length at least 298.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.5 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø38.8 mm over length 116.5 mm (from Z=0.0 to Z=219.3).\n10. Finish turn diameter Ø30.0 mm over length 102.8 mm (from Z=0.0 to Z=102.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01385", "images": ["images/Shaft_01385.png", "detail_png/Shaft_01385_length.png", "detail_png/Shaft_01385_diam.png", "detail_png/Shaft_01385_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.8 mm and length at least 116.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.3 mm over length 44.0 mm (from Z=0.0 to Z=92.4).\n9. Finish turn diameter Ø42.6 mm over length 7.1 mm (from Z=0.0 to Z=48.4).\n10. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03876", "images": ["images/Shaft_03876.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø67.9 mm and length at least 244.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.9 mm over length 46.3 mm (from Z=0.0 to Z=46.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.7 mm over length 22.9 mm (from Z=0.0 to Z=193.1).\n10. Finish turn diameter Ø55.5 mm over length 95.0 mm (from Z=0.0 to Z=170.2).\n11. Finish turn diameter Ø40.7 mm over length 75.2 mm (from Z=0.0 to Z=75.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04934", "images": ["images/Shaft_04934.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø47.6 mm and length at least 178.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.6 mm over length 5.3 mm (from Z=0.0 to Z=5.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 168.3 mm (from Z=0.0 to Z=168.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02133", "images": ["images/Shaft_02133.png", "detail_png/Shaft_02133_length.png", "detail_png/Shaft_02133_diam.png", "detail_png/Shaft_02133_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø66.9 mm and length at least 67.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.9 mm over length 10.1 mm (from Z=0.0 to Z=10.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø52.0 mm over length 9.1 mm (from Z=0.0 to Z=51.9).\n9. Finish turn diameter Ø39.5 mm over length 19.8 mm (from Z=0.0 to Z=42.8).\n10. Finish turn diameter Ø35.6 mm over length 23.0 mm (from Z=0.0 to Z=23.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02490", "images": ["images/Shaft_02490.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø64.0 mm and length at least 179.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.0 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.3 mm over length 29.4 mm (from Z=0.0 to Z=137.5).\n9. Finish turn diameter Ø43.1 mm over length 18.0 mm (from Z=0.0 to Z=108.1).\n10. Finish turn diameter Ø31.0 mm over length 35.4 mm (from Z=0.0 to Z=90.1).\n11. Finish turn diameter Ø30.0 mm over length 54.7 mm (from Z=0.0 to Z=54.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00289", "images": ["images/Shaft_00289.png", "detail_png/Shaft_00289_length.png", "detail_png/Shaft_00289_diam.png", "detail_png/Shaft_00289_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø80.4 mm and length at least 153.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.4 mm over length 28.7 mm (from Z=0.0 to Z=28.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 14.2 mm (from Z=0.0 to Z=119.6).\n9. Finish turn diameter Ø51.5 mm over length 6.5 mm (from Z=0.0 to Z=105.4).\n10. Finish turn diameter Ø32.0 mm over length 24.8 mm (from Z=0.0 to Z=98.9).\n11. Finish turn diameter Ø30.0 mm over length 74.1 mm (from Z=0.0 to Z=74.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01372", "images": ["images/Shaft_01372.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.9 mm and length at least 273.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.9 mm over length 17.3 mm (from Z=0.0 to Z=17.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.0 mm over length 42.4 mm (from Z=0.0 to Z=251.2).\n10. Finish turn diameter Ø54.1 mm over length 112.6 mm (from Z=0.0 to Z=208.8).\n11. Finish turn diameter Ø38.3 mm over length 96.2 mm (from Z=0.0 to Z=96.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02369", "images": ["images/Shaft_02369.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.8 mm and length at least 274.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.8 mm over length 60.4 mm (from Z=0.0 to Z=60.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 208.8 mm (from Z=0.0 to Z=208.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02413", "images": ["images/Shaft_02413.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 184.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 172.7 mm (from Z=0.0 to Z=172.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.3 mm over length 6.5 mm (from Z=0.0 to Z=6.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02891", "images": ["images/Shaft_02891.png", "detail_png/Shaft_02891_length.png", "detail_png/Shaft_02891_diam.png", "detail_png/Shaft_02891_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø40.2 mm and length at least 263.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.2 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 227.9 mm (from Z=0.0 to Z=227.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03448", "images": ["images/Shaft_03448.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.9 mm and length at least 272.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 71.5 mm (from Z=0.0 to Z=71.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.1 mm over length 112.9 mm (from Z=0.0 to Z=195.6).\n10. Finish turn diameter Ø30.0 mm over length 82.7 mm (from Z=0.0 to Z=82.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02715", "images": ["images/Shaft_02715.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø76.7 mm and length at least 83.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø74.7 mm over length 25.4 mm (from Z=0.0 to Z=25.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø74.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø60.3 mm over length 29.4 mm (from Z=0.0 to Z=52.9).\n9. Finish turn diameter Ø41.5 mm over length 23.5 mm (from Z=0.0 to Z=23.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03843", "images": ["images/Shaft_03843.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø75.4 mm and length at least 147.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 44.2 mm (from Z=0.0 to Z=44.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.1 mm over length 21.3 mm (from Z=0.0 to Z=98.6).\n9. Finish turn diameter Ø50.2 mm over length 37.7 mm (from Z=0.0 to Z=77.3).\n10. Finish turn diameter Ø43.2 mm over length 39.6 mm (from Z=0.0 to Z=39.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04199", "images": ["images/Shaft_04199.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø49.8 mm and length at least 267.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.8 mm over length 43.5 mm (from Z=0.0 to Z=43.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.6 mm over length 40.0 mm (from Z=0.0 to Z=218.7).\n10. Finish turn diameter Ø30.0 mm over length 178.7 mm (from Z=0.0 to Z=178.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03719", "images": ["images/Shaft_03719.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø81.2 mm and length at least 114.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.2 mm over length 37.1 mm (from Z=0.0 to Z=37.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.4 mm over length 37.6 mm (from Z=0.0 to Z=72.7).\n9. Finish turn diameter Ø56.2 mm over length 35.1 mm (from Z=0.0 to Z=35.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03840", "images": ["images/Shaft_03840.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø53.6 mm and length at least 234.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 49.6 mm (from Z=0.0 to Z=49.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.1 mm over length 50.6 mm (from Z=0.0 to Z=179.4).\n10. Finish turn diameter Ø30.0 mm over length 128.8 mm (from Z=0.0 to Z=128.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00088", "images": ["images/Shaft_00088.png", "detail_png/Shaft_00088_length.png", "detail_png/Shaft_00088_diam.png", "detail_png/Shaft_00088_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø58.5 mm and length at least 195.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 86.0 mm (from Z=0.0 to Z=86.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø52.1 mm over length 54.2 mm (from Z=0.0 to Z=104.9).\n10. Finish turn diameter Ø40.4 mm over length 38.7 mm (from Z=0.0 to Z=50.7).\n11. Finish turn diameter Ø33.7 mm over length 12.0 mm (from Z=0.0 to Z=12.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04382", "images": ["images/Shaft_04382.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 106.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 76.7 mm (from Z=0.0 to Z=76.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø23.7 mm over length 24.8 mm (from Z=0.0 to Z=24.8).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02814", "images": ["images/Shaft_02814.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.1 mm and length at least 292.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.1 mm over length 144.4 mm (from Z=0.0 to Z=144.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.9 mm over length 109.5 mm (from Z=0.0 to Z=143.1).\n10. Finish turn diameter Ø39.5 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00432", "images": ["images/Shaft_00432.png", "detail_png/Shaft_00432_length.png", "detail_png/Shaft_00432_diam.png", "detail_png/Shaft_00432_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.4 mm and length at least 146.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.4 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.7 mm over length 16.3 mm (from Z=0.0 to Z=129.6).\n9. Finish turn diameter Ø59.6 mm over length 35.7 mm (from Z=0.0 to Z=113.3).\n10. Finish turn diameter Ø46.8 mm over length 33.0 mm (from Z=0.0 to Z=77.6).\n11. Finish turn diameter Ø31.1 mm over length 16.7 mm (from Z=0.0 to Z=44.6).\n12. Finish turn diameter Ø30.0 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04813", "images": ["images/Shaft_04813.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø48.1 mm and length at least 103.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.1 mm over length 8.3 mm (from Z=0.0 to Z=8.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø42.5 mm over length 21.6 mm (from Z=0.0 to Z=89.8).\n9. Finish turn diameter Ø33.3 mm over length 8.6 mm (from Z=0.0 to Z=68.2).\n10. Finish turn diameter Ø30.0 mm over length 59.6 mm (from Z=0.0 to Z=59.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04417", "images": ["images/Shaft_04417.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø33.3 mm and length at least 127.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.3 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 102.5 mm (from Z=0.0 to Z=102.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00639", "images": ["images/Shaft_00639.png", "detail_png/Shaft_00639_length.png", "detail_png/Shaft_00639_diam.png", "detail_png/Shaft_00639_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 156.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 121.5 mm (from Z=0.0 to Z=121.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.8 mm over length 29.5 mm (from Z=0.0 to Z=29.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03870", "images": ["images/Shaft_03870.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø62.3 mm and length at least 133.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.3 mm over length 29.7 mm (from Z=0.0 to Z=29.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø49.3 mm over length 22.4 mm (from Z=0.0 to Z=98.9).\n9. Finish turn diameter Ø38.0 mm over length 5.8 mm (from Z=0.0 to Z=76.5).\n10. Finish turn diameter Ø30.0 mm over length 70.7 mm (from Z=0.0 to Z=70.7).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02008", "images": ["images/Shaft_02008.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø43.3 mm and length at least 81.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø41.3 mm over length 17.0 mm (from Z=0.0 to Z=17.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø41.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 59.7 mm (from Z=0.0 to Z=59.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00724", "images": ["images/Shaft_00724.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.5 mm and length at least 286.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 105.5 mm (from Z=0.0 to Z=105.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.2 mm over length 15.1 mm (from Z=0.0 to Z=175.7).\n10. Finish turn diameter Ø51.2 mm over length 160.6 mm (from Z=0.0 to Z=160.6).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04287", "images": ["images/Shaft_04287.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø72.7 mm and length at least 169.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.7 mm over length 5.2 mm (from Z=0.0 to Z=5.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.8 mm over length 32.6 mm (from Z=0.0 to Z=159.7).\n9. Finish turn diameter Ø53.4 mm over length 39.5 mm (from Z=0.0 to Z=127.1).\n10. Finish turn diameter Ø37.9 mm over length 29.2 mm (from Z=0.0 to Z=87.6).\n11. Finish turn diameter Ø34.3 mm over length 23.6 mm (from Z=0.0 to Z=58.4).\n12. Finish turn diameter Ø30.0 mm over length 34.8 mm (from Z=0.0 to Z=34.8).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00640", "images": ["images/Shaft_00640.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø53.1 mm and length at least 287.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.1 mm over length 71.0 mm (from Z=0.0 to Z=71.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.2 mm over length 44.2 mm (from Z=0.0 to Z=211.2).\n10. Finish turn diameter Ø34.6 mm over length 38.7 mm (from Z=0.0 to Z=167.0).\n11. Finish turn diameter Ø30.0 mm over length 128.3 mm (from Z=0.0 to Z=128.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04234", "images": ["images/Shaft_04234.png", "detail_png/Shaft_04234_length.png", "detail_png/Shaft_04234_diam.png", "detail_png/Shaft_04234_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.2 mm and length at least 195.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.2 mm over length 77.7 mm (from Z=0.0 to Z=77.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 113.1 mm (from Z=0.0 to Z=113.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04985", "images": ["images/Shaft_04985.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø36.5 mm and length at least 172.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.5 mm over length 21.6 mm (from Z=0.0 to Z=21.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 146.2 mm (from Z=0.0 to Z=146.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02289", "images": ["images/Shaft_02289.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø50.1 mm and length at least 129.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.1 mm over length 50.6 mm (from Z=0.0 to Z=50.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.6 mm over length 25.9 mm (from Z=0.0 to Z=73.5).\n9. Finish turn diameter Ø30.0 mm over length 47.6 mm (from Z=0.0 to Z=47.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04312", "images": ["images/Shaft_04312.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.7 mm and length at least 321.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.7 mm over length 68.5 mm (from Z=0.0 to Z=68.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.7 mm over length 62.1 mm (from Z=0.0 to Z=248.1).\n10. Finish turn diameter Ø39.5 mm over length 186.0 mm (from Z=0.0 to Z=186.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01163", "images": ["images/Shaft_01163.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø45.4 mm and length at least 120.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.4 mm over length 10.9 mm (from Z=0.0 to Z=10.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.4 mm over length 9.0 mm (from Z=0.0 to Z=104.9).\n10. Finish turn diameter Ø30.0 mm over length 95.9 mm (from Z=0.0 to Z=95.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00655", "images": ["images/Shaft_00655.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø68.6 mm and length at least 250.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.6 mm over length 35.2 mm (from Z=0.0 to Z=35.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø61.3 mm over length 86.3 mm (from Z=0.0 to Z=210.3).\n10. Finish turn diameter Ø53.4 mm over length 20.9 mm (from Z=0.0 to Z=124.0).\n11. Finish turn diameter Ø49.7 mm over length 46.3 mm (from Z=0.0 to Z=103.1).\n12. Finish turn diameter Ø45.6 mm over length 19.4 mm (from Z=0.0 to Z=56.8).\n13. Finish turn diameter Ø32.6 mm over length 37.4 mm (from Z=0.0 to Z=37.4).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04950", "images": ["images/Shaft_04950.png", "detail_png/Shaft_04950_length.png", "detail_png/Shaft_04950_diam.png", "detail_png/Shaft_04950_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.3 mm and length at least 212.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.3 mm over length 25.3 mm (from Z=0.0 to Z=25.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø36.8 mm over length 46.7 mm (from Z=0.0 to Z=181.7).\n10. Finish turn diameter Ø30.0 mm over length 135.0 mm (from Z=0.0 to Z=135.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00927", "images": ["images/Shaft_00927.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 272.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 190.1 mm (from Z=0.0 to Z=190.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.4 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03019", "images": ["images/Shaft_03019.png", "detail_png/Shaft_03019_length.png", "detail_png/Shaft_03019_diam.png", "detail_png/Shaft_03019_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø68.7 mm and length at least 276.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.7 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø62.4 mm over length 157.1 mm (from Z=0.0 to Z=234.5).\n10. Finish turn diameter Ø57.3 mm over length 60.6 mm (from Z=0.0 to Z=77.4).\n11. Finish turn diameter Ø40.7 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03958", "images": ["images/Shaft_03958.png", "detail_png/Shaft_03958_length.png", "detail_png/Shaft_03958_diam.png", "detail_png/Shaft_03958_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø49.0 mm and length at least 73.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø47.0 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø47.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.7 mm over length 9.0 mm (from Z=0.0 to Z=48.0).\n9. Finish turn diameter Ø30.0 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00310", "images": ["images/Shaft_00310.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø75.6 mm and length at least 238.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.6 mm over length 42.1 mm (from Z=0.0 to Z=42.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.0 mm over length 73.8 mm (from Z=0.0 to Z=191.1).\n10. Finish turn diameter Ø55.5 mm over length 117.3 mm (from Z=0.0 to Z=117.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00274", "images": ["images/Shaft_00274.png", "detail_png/Shaft_00274_length.png", "detail_png/Shaft_00274_diam.png", "detail_png/Shaft_00274_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.9 mm and length at least 225.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 102.4 mm (from Z=0.0 to Z=102.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.3 mm over length 53.1 mm (from Z=0.0 to Z=118.3).\n10. Finish turn diameter Ø30.0 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03006", "images": ["images/Shaft_03006.png", "detail_png/Shaft_03006_length.png", "detail_png/Shaft_03006_diam.png", "detail_png/Shaft_03006_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø45.2 mm and length at least 89.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.2 mm over length 16.8 mm (from Z=0.0 to Z=16.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.4 mm over length 8.0 mm (from Z=0.0 to Z=67.4).\n9. Finish turn diameter Ø30.0 mm over length 59.4 mm (from Z=0.0 to Z=59.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04474", "images": ["images/Shaft_04474.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.2 mm and length at least 267.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.2 mm over length 104.2 mm (from Z=0.0 to Z=104.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø60.7 mm over length 41.7 mm (from Z=0.0 to Z=158.4).\n10. Finish turn diameter Ø44.2 mm over length 17.4 mm (from Z=0.0 to Z=116.7).\n11. Finish turn diameter Ø30.0 mm over length 99.3 mm (from Z=0.0 to Z=99.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03365", "images": ["images/Shaft_03365.png", "detail_png/Shaft_03365_length.png", "detail_png/Shaft_03365_diam.png", "detail_png/Shaft_03365_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 307.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 273.6 mm (from Z=0.0 to Z=273.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø25.6 mm over length 29.3 mm (from Z=0.0 to Z=29.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02205", "images": ["images/Shaft_02205.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø74.1 mm and length at least 315.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.1 mm over length 56.2 mm (from Z=0.0 to Z=56.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.5 mm over length 153.0 mm (from Z=0.0 to Z=254.1).\n10. Finish turn diameter Ø47.4 mm over length 101.1 mm (from Z=0.0 to Z=101.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04110", "images": ["images/Shaft_04110.png", "detail_png/Shaft_04110_length.png", "detail_png/Shaft_04110_diam.png", "detail_png/Shaft_04110_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø75.4 mm and length at least 289.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.4 mm over length 98.4 mm (from Z=0.0 to Z=98.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø70.3 mm over length 55.1 mm (from Z=0.0 to Z=186.2).\n10. Finish turn diameter Ø60.9 mm over length 131.1 mm (from Z=0.0 to Z=131.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01939", "images": ["images/Shaft_01939.png", "detail_png/Shaft_01939_length.png", "detail_png/Shaft_01939_diam.png", "detail_png/Shaft_01939_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.0 mm and length at least 305.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 56.7 mm (from Z=0.0 to Z=56.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.9 mm over length 77.9 mm (from Z=0.0 to Z=243.5).\n10. Finish turn diameter Ø33.9 mm over length 12.8 mm (from Z=0.0 to Z=165.6).\n11. Finish turn diameter Ø30.0 mm over length 152.8 mm (from Z=0.0 to Z=152.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04080", "images": ["images/Shaft_04080.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø37.9 mm and length at least 223.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø35.9 mm over length 11.5 mm (from Z=0.0 to Z=11.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø35.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 207.2 mm (from Z=0.0 to Z=207.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00060", "images": ["images/Shaft_00060.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø54.0 mm and length at least 170.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.0 mm over length 21.8 mm (from Z=0.0 to Z=21.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø39.7 mm over length 58.5 mm (from Z=0.0 to Z=143.3).\n9. Finish turn diameter Ø30.0 mm over length 84.8 mm (from Z=0.0 to Z=84.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03479", "images": ["images/Shaft_03479.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.6 mm and length at least 204.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.6 mm over length 89.7 mm (from Z=0.0 to Z=89.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.3 mm over length 38.1 mm (from Z=0.0 to Z=109.5).\n10. Finish turn diameter Ø42.3 mm over length 51.0 mm (from Z=0.0 to Z=71.4).\n11. Finish turn diameter Ø38.9 mm over length 20.4 mm (from Z=0.0 to Z=20.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01522", "images": ["images/Shaft_01522.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø73.5 mm and length at least 223.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.5 mm over length 59.3 mm (from Z=0.0 to Z=59.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.2 mm over length 72.4 mm (from Z=0.0 to Z=158.8).\n10. Finish turn diameter Ø51.1 mm over length 9.2 mm (from Z=0.0 to Z=86.4).\n11. Finish turn diameter Ø37.1 mm over length 58.8 mm (from Z=0.0 to Z=77.2).\n12. Finish turn diameter Ø30.0 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01849", "images": ["images/Shaft_01849.png", "detail_png/Shaft_01849_length.png", "detail_png/Shaft_01849_diam.png", "detail_png/Shaft_01849_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø75.5 mm and length at least 219.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.5 mm over length 56.9 mm (from Z=0.0 to Z=56.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.1 mm over length 56.0 mm (from Z=0.0 to Z=157.8).\n10. Finish turn diameter Ø49.8 mm over length 33.5 mm (from Z=0.0 to Z=101.8).\n11. Finish turn diameter Ø40.7 mm over length 54.1 mm (from Z=0.0 to Z=68.3).\n12. Finish turn diameter Ø30.0 mm over length 14.2 mm (from Z=0.0 to Z=14.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02910", "images": ["images/Shaft_02910.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.7 mm and length at least 281.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.7 mm over length 84.6 mm (from Z=0.0 to Z=84.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.7 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.5 mm over length 69.2 mm (from Z=0.0 to Z=192.2).\n10. Finish turn diameter Ø43.0 mm over length 123.0 mm (from Z=0.0 to Z=123.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03151", "images": ["images/Shaft_03151.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.0 mm and length at least 233.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.0 mm over length 53.4 mm (from Z=0.0 to Z=53.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.6 mm over length 14.6 mm (from Z=0.0 to Z=175.1).\n10. Finish turn diameter Ø43.2 mm over length 31.3 mm (from Z=0.0 to Z=160.5).\n11. Finish turn diameter Ø31.7 mm over length 73.2 mm (from Z=0.0 to Z=129.2).\n12. Finish turn diameter Ø30.0 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03686", "images": ["images/Shaft_03686.png", "detail_png/Shaft_03686_length.png", "detail_png/Shaft_03686_diam.png", "detail_png/Shaft_03686_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø59.9 mm and length at least 104.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø57.9 mm over length 39.0 mm (from Z=0.0 to Z=39.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø57.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø38.4 mm over length 29.8 mm (from Z=0.0 to Z=60.6).\n9. Finish turn diameter Ø30.0 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04522", "images": ["images/Shaft_04522.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 234.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 139.8 mm (from Z=0.0 to Z=139.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø23.5 mm over length 89.8 mm (from Z=0.0 to Z=89.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03474", "images": ["images/Shaft_03474.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø52.6 mm and length at least 254.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø50.6 mm over length 52.6 mm (from Z=0.0 to Z=52.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø50.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø47.0 mm over length 28.7 mm (from Z=0.0 to Z=196.8).\n10. Finish turn diameter Ø36.8 mm over length 34.1 mm (from Z=0.0 to Z=168.1).\n11. Finish turn diameter Ø30.0 mm over length 134.0 mm (from Z=0.0 to Z=134.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04173", "images": ["images/Shaft_04173.png", "detail_png/Shaft_04173_length.png", "detail_png/Shaft_04173_diam.png", "detail_png/Shaft_04173_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.1 mm and length at least 263.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.1 mm over length 61.9 mm (from Z=0.0 to Z=61.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 196.8 mm (from Z=0.0 to Z=196.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03722", "images": ["images/Shaft_03722.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø51.0 mm and length at least 215.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 45.5 mm (from Z=0.0 to Z=45.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø40.9 mm over length 27.1 mm (from Z=0.0 to Z=164.9).\n10. Finish turn diameter Ø35.6 mm over length 52.4 mm (from Z=0.0 to Z=137.8).\n11. Finish turn diameter Ø30.0 mm over length 85.4 mm (from Z=0.0 to Z=85.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01472", "images": ["images/Shaft_01472.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.7 mm and length at least 168.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 40.3 mm (from Z=0.0 to Z=40.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 46.7 mm (from Z=0.0 to Z=122.8).\n9. Finish turn diameter Ø36.4 mm over length 10.8 mm (from Z=0.0 to Z=76.1).\n10. Finish turn diameter Ø30.0 mm over length 65.3 mm (from Z=0.0 to Z=65.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03487", "images": ["images/Shaft_03487.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø77.6 mm and length at least 257.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.6 mm over length 49.9 mm (from Z=0.0 to Z=49.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.2 mm over length 21.2 mm (from Z=0.0 to Z=202.2).\n10. Finish turn diameter Ø39.7 mm over length 31.5 mm (from Z=0.0 to Z=181.0).\n11. Finish turn diameter Ø30.0 mm over length 149.5 mm (from Z=0.0 to Z=149.5).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03735", "images": ["images/Shaft_03735.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø74.0 mm and length at least 241.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø72.0 mm over length 26.9 mm (from Z=0.0 to Z=26.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø72.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø57.4 mm over length 54.5 mm (from Z=0.0 to Z=210.0).\n10. Finish turn diameter Ø46.4 mm over length 37.6 mm (from Z=0.0 to Z=155.5).\n11. Finish turn diameter Ø37.1 mm over length 8.0 mm (from Z=0.0 to Z=117.9).\n12. Finish turn diameter Ø30.0 mm over length 109.9 mm (from Z=0.0 to Z=109.9).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03406", "images": ["images/Shaft_03406.png", "detail_png/Shaft_03406_length.png", "detail_png/Shaft_03406_diam.png", "detail_png/Shaft_03406_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø78.9 mm and length at least 255.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø64.2 mm over length 70.5 mm (from Z=0.0 to Z=203.9).\n10. Finish turn diameter Ø46.2 mm over length 120.6 mm (from Z=0.0 to Z=133.4).\n11. Finish turn diameter Ø36.4 mm over length 12.8 mm (from Z=0.0 to Z=12.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01124", "images": ["images/Shaft_01124.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.8 mm and length at least 206.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.8 mm over length 36.0 mm (from Z=0.0 to Z=36.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 165.8 mm (from Z=0.0 to Z=165.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00693", "images": ["images/Shaft_00693.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 220.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 168.4 mm (from Z=0.0 to Z=168.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø26.0 mm over length 46.9 mm (from Z=0.0 to Z=46.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04951", "images": ["images/Shaft_04951.png", "detail_png/Shaft_04951_length.png", "detail_png/Shaft_04951_diam.png", "detail_png/Shaft_04951_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø48.8 mm and length at least 179.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø46.8 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø46.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.5 mm over length 73.0 mm (from Z=0.0 to Z=143.4).\n9. Finish turn diameter Ø34.8 mm over length 70.4 mm (from Z=0.0 to Z=70.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03577", "images": ["images/Shaft_03577.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.5 mm and length at least 222.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.5 mm over length 18.9 mm (from Z=0.0 to Z=18.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø59.9 mm over length 142.6 mm (from Z=0.0 to Z=198.6).\n10. Finish turn diameter Ø44.2 mm over length 56.0 mm (from Z=0.0 to Z=56.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03987", "images": ["images/Shaft_03987.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.1 mm and length at least 166.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.1 mm over length 38.1 mm (from Z=0.0 to Z=38.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 123.0 mm (from Z=0.0 to Z=123.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01179", "images": ["images/Shaft_01179.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø64.5 mm and length at least 251.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 36.6 mm (from Z=0.0 to Z=36.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.9 mm over length 28.9 mm (from Z=0.0 to Z=209.5).\n10. Finish turn diameter Ø38.4 mm over length 50.6 mm (from Z=0.0 to Z=180.6).\n11. Finish turn diameter Ø35.1 mm over length 41.9 mm (from Z=0.0 to Z=130.0).\n12. Finish turn diameter Ø30.0 mm over length 88.1 mm (from Z=0.0 to Z=88.1).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00128", "images": ["images/Shaft_00128.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.4 mm and length at least 185.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.4 mm over length 63.6 mm (from Z=0.0 to Z=63.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.4 mm over length 53.6 mm (from Z=0.0 to Z=116.6).\n9. Finish turn diameter Ø46.6 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00587", "images": ["images/Shaft_00587.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø77.1 mm and length at least 180.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø75.1 mm over length 21.7 mm (from Z=0.0 to Z=21.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø75.1 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø66.9 mm over length 26.5 mm (from Z=0.0 to Z=153.7).\n9. Finish turn diameter Ø56.4 mm over length 52.3 mm (from Z=0.0 to Z=127.2).\n10. Finish turn diameter Ø36.5 mm over length 50.9 mm (from Z=0.0 to Z=74.9).\n11. Finish turn diameter Ø30.0 mm over length 24.0 mm (from Z=0.0 to Z=24.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00095", "images": ["images/Shaft_00095.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø80.2 mm and length at least 163.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø78.2 mm over length 50.0 mm (from Z=0.0 to Z=50.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø78.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø63.3 mm over length 10.9 mm (from Z=0.0 to Z=108.4).\n9. Finish turn diameter Ø46.4 mm over length 46.7 mm (from Z=0.0 to Z=97.5).\n10. Finish turn diameter Ø38.5 mm over length 50.8 mm (from Z=0.0 to Z=50.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01100", "images": ["images/Shaft_01100.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 262.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 220.5 mm (from Z=0.0 to Z=220.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø28.0 mm over length 36.9 mm (from Z=0.0 to Z=36.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01028", "images": ["images/Shaft_01028.png", "detail_png/Shaft_01028_length.png", "detail_png/Shaft_01028_diam.png", "detail_png/Shaft_01028_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø68.8 mm and length at least 228.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø66.8 mm over length 19.6 mm (from Z=0.0 to Z=19.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø66.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø63.6 mm over length 36.9 mm (from Z=0.0 to Z=203.6).\n10. Finish turn diameter Ø58.5 mm over length 23.6 mm (from Z=0.0 to Z=166.7).\n11. Finish turn diameter Ø42.1 mm over length 13.9 mm (from Z=0.0 to Z=143.1).\n12. Finish turn diameter Ø30.0 mm over length 129.2 mm (from Z=0.0 to Z=129.2).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02363", "images": ["images/Shaft_02363.png", "detail_png/Shaft_02363_length.png", "detail_png/Shaft_02363_diam.png", "detail_png/Shaft_02363_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø47.5 mm and length at least 99.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.5 mm over length 18.7 mm (from Z=0.0 to Z=18.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.3 mm over length 9.9 mm (from Z=0.0 to Z=75.5).\n9. Finish turn diameter Ø30.0 mm over length 65.6 mm (from Z=0.0 to Z=65.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01263", "images": ["images/Shaft_01263.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø63.9 mm and length at least 91.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø61.9 mm over length 30.8 mm (from Z=0.0 to Z=30.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø61.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.0 mm over length 7.8 mm (from Z=0.0 to Z=55.2).\n9. Finish turn diameter Ø44.5 mm over length 19.5 mm (from Z=0.0 to Z=47.4).\n10. Finish turn diameter Ø38.5 mm over length 27.9 mm (from Z=0.0 to Z=27.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03417", "images": ["images/Shaft_03417.png", "detail_png/Shaft_03417_length.png", "detail_png/Shaft_03417_diam.png", "detail_png/Shaft_03417_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø56.0 mm and length at least 76.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.0 mm over length 23.4 mm (from Z=0.0 to Z=23.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø40.4 mm over length 28.2 mm (from Z=0.0 to Z=48.4).\n9. Finish turn diameter Ø34.3 mm over length 20.2 mm (from Z=0.0 to Z=20.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02951", "images": ["images/Shaft_02951.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.0 mm and length at least 170.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 71.9 mm (from Z=0.0 to Z=71.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø19.0 mm over length 93.4 mm (from Z=0.0 to Z=93.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03150", "images": ["images/Shaft_03150.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø51.6 mm and length at least 322.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.6 mm over length 88.4 mm (from Z=0.0 to Z=88.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.0 mm over length 42.4 mm (from Z=0.0 to Z=228.8).\n10. Finish turn diameter Ø31.5 mm over length 79.2 mm (from Z=0.0 to Z=186.4).\n11. Finish turn diameter Ø30.0 mm over length 107.2 mm (from Z=0.0 to Z=107.2).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04550", "images": ["images/Shaft_04550.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø45.1 mm and length at least 294.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø43.1 mm over length 111.0 mm (from Z=0.0 to Z=111.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø43.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.8 mm over length 108.5 mm (from Z=0.0 to Z=178.0).\n10. Finish turn diameter Ø30.0 mm over length 69.5 mm (from Z=0.0 to Z=69.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01541", "images": ["images/Shaft_01541.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.4 mm and length at least 134.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 85.7 mm (from Z=0.0 to Z=85.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01139", "images": ["images/Shaft_01139.png", "detail_png/Shaft_01139_length.png", "detail_png/Shaft_01139_diam.png", "detail_png/Shaft_01139_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø50.8 mm and length at least 293.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø48.8 mm over length 122.1 mm (from Z=0.0 to Z=122.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø48.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø43.5 mm over length 70.3 mm (from Z=0.0 to Z=166.3).\n10. Finish turn diameter Ø31.0 mm over length 96.0 mm (from Z=0.0 to Z=96.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03890", "images": ["images/Shaft_03890.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø47.4 mm and length at least 75.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø45.4 mm over length 11.2 mm (from Z=0.0 to Z=11.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø45.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø34.8 mm over length 17.7 mm (from Z=0.0 to Z=59.0).\n9. Finish turn diameter Ø30.0 mm over length 41.3 mm (from Z=0.0 to Z=41.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01420", "images": ["images/Shaft_01420.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 74.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 44.4 mm (from Z=0.0 to Z=44.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.4 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01730", "images": ["images/Shaft_01730.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.0 mm and length at least 129.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 59.6 mm (from Z=0.0 to Z=59.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø22.1 mm over length 64.6 mm (from Z=0.0 to Z=64.6).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04465", "images": ["images/Shaft_04465.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø42.6 mm and length at least 196.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.6 mm over length 20.8 mm (from Z=0.0 to Z=20.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 170.5 mm (from Z=0.0 to Z=170.5).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03565", "images": ["images/Shaft_03565.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø44.5 mm and length at least 77.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.5 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.5 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 53.3 mm (from Z=0.0 to Z=53.3).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03125", "images": ["images/Shaft_03125.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø66.8 mm and length at least 292.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.8 mm over length 59.2 mm (from Z=0.0 to Z=59.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.4 mm over length 50.8 mm (from Z=0.0 to Z=228.1).\n10. Finish turn diameter Ø41.7 mm over length 85.4 mm (from Z=0.0 to Z=177.3).\n11. Finish turn diameter Ø34.3 mm over length 91.9 mm (from Z=0.0 to Z=91.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03326", "images": ["images/Shaft_03326.png", "detail_png/Shaft_03326_length.png", "detail_png/Shaft_03326_diam.png", "detail_png/Shaft_03326_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø58.5 mm and length at least 286.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.5 mm over length 65.2 mm (from Z=0.0 to Z=65.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.3 mm over length 42.2 mm (from Z=0.0 to Z=216.4).\n10. Finish turn diameter Ø46.4 mm over length 22.3 mm (from Z=0.0 to Z=174.2).\n11. Finish turn diameter Ø30.0 mm over length 151.9 mm (from Z=0.0 to Z=151.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03135", "images": ["images/Shaft_03135.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.9 mm and length at least 80.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.9 mm over length 13.8 mm (from Z=0.0 to Z=13.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø36.9 mm over length 21.8 mm (from Z=0.0 to Z=61.9).\n9. Finish turn diameter Ø30.0 mm over length 40.1 mm (from Z=0.0 to Z=40.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02606", "images": ["images/Shaft_02606.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø65.5 mm and length at least 260.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.5 mm over length 39.2 mm (from Z=0.0 to Z=39.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø53.4 mm over length 34.7 mm (from Z=0.0 to Z=216.2).\n10. Finish turn diameter Ø37.7 mm over length 51.6 mm (from Z=0.0 to Z=181.5).\n11. Finish turn diameter Ø30.0 mm over length 129.9 mm (from Z=0.0 to Z=129.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03229", "images": ["images/Shaft_03229.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø44.9 mm and length at least 169.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.9 mm over length 47.0 mm (from Z=0.0 to Z=47.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø33.1 mm over length 58.8 mm (from Z=0.0 to Z=117.8).\n9. Finish turn diameter Ø30.0 mm over length 59.0 mm (from Z=0.0 to Z=59.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03536", "images": ["images/Shaft_03536.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.3 mm and length at least 144.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.3 mm over length 42.3 mm (from Z=0.0 to Z=42.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø61.6 mm over length 17.5 mm (from Z=0.0 to Z=97.0).\n9. Finish turn diameter Ø43.8 mm over length 16.5 mm (from Z=0.0 to Z=79.5).\n10. Finish turn diameter Ø35.1 mm over length 10.7 mm (from Z=0.0 to Z=63.0).\n11. Finish turn diameter Ø30.0 mm over length 52.3 mm (from Z=0.0 to Z=52.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01927", "images": ["images/Shaft_01927.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.4 mm and length at least 206.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.4 mm over length 21.3 mm (from Z=0.0 to Z=21.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.8 mm over length 30.0 mm (from Z=0.0 to Z=180.1).\n10. Finish turn diameter Ø30.5 mm over length 35.3 mm (from Z=0.0 to Z=150.1).\n11. Finish turn diameter Ø30.0 mm over length 114.8 mm (from Z=0.0 to Z=114.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04928", "images": ["images/Shaft_04928.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø78.9 mm and length at least 285.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø76.9 mm over length 136.3 mm (from Z=0.0 to Z=136.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø76.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø66.1 mm over length 107.9 mm (from Z=0.0 to Z=144.3).\n10. Finish turn diameter Ø50.9 mm over length 36.4 mm (from Z=0.0 to Z=36.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02311", "images": ["images/Shaft_02311.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø35.6 mm and length at least 229.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.6 mm over length 23.9 mm (from Z=0.0 to Z=23.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 200.8 mm (from Z=0.0 to Z=200.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00898", "images": ["images/Shaft_00898.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø55.2 mm and length at least 246.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.2 mm over length 25.1 mm (from Z=0.0 to Z=25.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø35.4 mm over length 42.0 mm (from Z=0.0 to Z=216.4).\n10. Finish turn diameter Ø30.0 mm over length 174.4 mm (from Z=0.0 to Z=174.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02942", "images": ["images/Shaft_02942.png", "detail_png/Shaft_02942_length.png", "detail_png/Shaft_02942_diam.png", "detail_png/Shaft_02942_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø72.5 mm and length at least 260.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø70.5 mm over length 67.0 mm (from Z=0.0 to Z=67.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø70.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø67.3 mm over length 94.7 mm (from Z=0.0 to Z=188.2).\n10. Finish turn diameter Ø53.5 mm over length 93.5 mm (from Z=0.0 to Z=93.5).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04587", "images": ["images/Shaft_04587.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø70.2 mm and length at least 219.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.2 mm over length 64.7 mm (from Z=0.0 to Z=64.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.0 mm over length 56.8 mm (from Z=0.0 to Z=149.7).\n10. Finish turn diameter Ø43.1 mm over length 64.3 mm (from Z=0.0 to Z=92.9).\n11. Finish turn diameter Ø37.9 mm over length 18.3 mm (from Z=0.0 to Z=28.6).\n12. Finish turn diameter Ø30.0 mm over length 10.3 mm (from Z=0.0 to Z=10.3).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00006", "images": ["images/Shaft_00006.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø81.8 mm and length at least 167.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.8 mm over length 68.0 mm (from Z=0.0 to Z=68.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø64.7 mm over length 47.5 mm (from Z=0.0 to Z=94.3).\n9. Finish turn diameter Ø47.2 mm over length 46.8 mm (from Z=0.0 to Z=46.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00435", "images": ["images/Shaft_00435.png", "detail_png/Shaft_00435_length.png", "detail_png/Shaft_00435_diam.png", "detail_png/Shaft_00435_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.3 mm and length at least 176.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.3 mm over length 18.4 mm (from Z=0.0 to Z=18.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.3 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.4 mm over length 56.2 mm (from Z=0.0 to Z=152.8).\n9. Finish turn diameter Ø39.7 mm over length 13.4 mm (from Z=0.0 to Z=96.6).\n10. Finish turn diameter Ø35.5 mm over length 48.5 mm (from Z=0.0 to Z=83.2).\n11. Finish turn diameter Ø30.0 mm over length 34.7 mm (from Z=0.0 to Z=34.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04496", "images": ["images/Shaft_04496.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø64.7 mm and length at least 142.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.7 mm over length 78.6 mm (from Z=0.0 to Z=78.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø45.5 mm over length 21.3 mm (from Z=0.0 to Z=58.9).\n9. Finish turn diameter Ø30.2 mm over length 28.7 mm (from Z=0.0 to Z=37.6).\n10. Finish turn diameter Ø30.0 mm over length 8.9 mm (from Z=0.0 to Z=8.9).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03024", "images": ["images/Shaft_03024.png", "detail_png/Shaft_03024_length.png", "detail_png/Shaft_03024_diam.png", "detail_png/Shaft_03024_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø38.0 mm and length at least 153.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.0 mm over length 11.8 mm (from Z=0.0 to Z=11.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 137.1 mm (from Z=0.0 to Z=137.1).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00511", "images": ["images/Shaft_00511.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.8 mm and length at least 251.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.8 mm over length 105.0 mm (from Z=0.0 to Z=105.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 141.2 mm (from Z=0.0 to Z=141.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02409", "images": ["images/Shaft_02409.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø55.1 mm and length at least 279.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø53.1 mm over length 44.3 mm (from Z=0.0 to Z=44.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø53.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.6 mm over length 27.2 mm (from Z=0.0 to Z=230.3).\n10. Finish turn diameter Ø30.0 mm over length 203.1 mm (from Z=0.0 to Z=203.1).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01044", "images": ["images/Shaft_01044.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø51.0 mm and length at least 67.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.0 mm over length 14.0 mm (from Z=0.0 to Z=14.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.5 mm over length 25.0 mm (from Z=0.0 to Z=48.4).\n9. Finish turn diameter Ø41.3 mm over length 9.0 mm (from Z=0.0 to Z=23.4).\n10. Finish turn diameter Ø30.0 mm over length 14.4 mm (from Z=0.0 to Z=14.4).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03311", "images": ["images/Shaft_03311.png", "detail_png/Shaft_03311_length.png", "detail_png/Shaft_03311_diam.png", "detail_png/Shaft_03311_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.8 mm and length at least 201.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.8 mm over length 30.0 mm (from Z=0.0 to Z=30.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø37.0 mm over length 37.6 mm (from Z=0.0 to Z=166.9).\n10. Finish turn diameter Ø30.0 mm over length 129.3 mm (from Z=0.0 to Z=129.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04181", "images": ["images/Shaft_04181.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø41.6 mm and length at least 198.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø39.6 mm over length 28.8 mm (from Z=0.0 to Z=28.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø39.6 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.1 mm over length 42.3 mm (from Z=0.0 to Z=164.5).\n10. Finish turn diameter Ø30.0 mm over length 122.2 mm (from Z=0.0 to Z=122.2).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00066", "images": ["images/Shaft_00066.png", "detail_png/Shaft_00066_length.png", "detail_png/Shaft_00066_diam.png", "detail_png/Shaft_00066_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 193.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 146.3 mm (from Z=0.0 to Z=146.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø24.9 mm over length 42.2 mm (from Z=0.0 to Z=42.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00731", "images": ["images/Shaft_00731.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø42.5 mm and length at least 149.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø40.5 mm over length 33.6 mm (from Z=0.0 to Z=33.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø40.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 111.0 mm (from Z=0.0 to Z=111.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02820", "images": ["images/Shaft_02820.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 250.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 78.4 mm (from Z=0.0 to Z=78.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.0 mm over length 167.4 mm (from Z=0.0 to Z=167.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03561", "images": ["images/Shaft_03561.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø62.0 mm and length at least 89.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø60.0 mm over length 18.1 mm (from Z=0.0 to Z=18.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø60.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø44.1 mm over length 6.5 mm (from Z=0.0 to Z=66.8).\n9. Finish turn diameter Ø30.0 mm over length 60.3 mm (from Z=0.0 to Z=60.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02494", "images": ["images/Shaft_02494.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø54.6 mm and length at least 193.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø52.6 mm over length 57.6 mm (from Z=0.0 to Z=57.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø52.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.7 mm over length 50.5 mm (from Z=0.0 to Z=130.8).\n9. Finish turn diameter Ø40.8 mm over length 80.3 mm (from Z=0.0 to Z=80.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04671", "images": ["images/Shaft_04671.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø46.8 mm and length at least 294.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø44.8 mm over length 25.9 mm (from Z=0.0 to Z=25.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø44.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 263.3 mm (from Z=0.0 to Z=263.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02455", "images": ["images/Shaft_02455.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø73.0 mm and length at least 82.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.0 mm over length 19.3 mm (from Z=0.0 to Z=19.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.0 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø67.6 mm over length 21.2 mm (from Z=0.0 to Z=58.4).\n9. Finish turn diameter Ø50.0 mm over length 20.4 mm (from Z=0.0 to Z=37.2).\n10. Finish turn diameter Ø33.0 mm over length 5.5 mm (from Z=0.0 to Z=16.8).\n11. Finish turn diameter Ø30.0 mm over length 11.3 mm (from Z=0.0 to Z=11.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02593", "images": ["images/Shaft_02593.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.8 mm and length at least 256.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.8 mm over length 53.6 mm (from Z=0.0 to Z=53.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 197.6 mm (from Z=0.0 to Z=197.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01684", "images": ["images/Shaft_01684.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø36.7 mm and length at least 149.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø34.7 mm over length 46.5 mm (from Z=0.0 to Z=46.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø34.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.8 mm over length 52.9 mm (from Z=0.0 to Z=98.1).\n9. Finish turn diameter Ø30.0 mm over length 45.2 mm (from Z=0.0 to Z=45.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01602", "images": ["images/Shaft_01602.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø79.8 mm and length at least 161.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø77.8 mm over length 48.8 mm (from Z=0.0 to Z=48.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø77.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø70.1 mm over length 24.9 mm (from Z=0.0 to Z=107.6).\n9. Finish turn diameter Ø51.0 mm over length 51.7 mm (from Z=0.0 to Z=82.7).\n10. Finish turn diameter Ø38.3 mm over length 21.9 mm (from Z=0.0 to Z=31.0).\n11. Finish turn diameter Ø31.8 mm over length 9.1 mm (from Z=0.0 to Z=9.1).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03663", "images": ["images/Shaft_03663.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø33.2 mm and length at least 271.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø31.2 mm over length 25.6 mm (from Z=0.0 to Z=25.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø31.2 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 240.9 mm (from Z=0.0 to Z=240.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03194", "images": ["images/Shaft_03194.png", "detail_png/Shaft_03194_length.png", "detail_png/Shaft_03194_diam.png", "detail_png/Shaft_03194_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø67.4 mm and length at least 251.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.4 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø46.5 mm over length 34.1 mm (from Z=0.0 to Z=192.8).\n10. Finish turn diameter Ø30.8 mm over length 85.0 mm (from Z=0.0 to Z=158.7).\n11. Finish turn diameter Ø30.0 mm over length 73.7 mm (from Z=0.0 to Z=73.7).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02387", "images": ["images/Shaft_02387.png", "detail_png/Shaft_02387_length.png", "detail_png/Shaft_02387_diam.png", "detail_png/Shaft_02387_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 264.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 189.3 mm (from Z=0.0 to Z=189.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø27.0 mm over length 70.0 mm (from Z=0.0 to Z=70.0).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04352", "images": ["images/Shaft_04352.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø64.5 mm and length at least 206.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø62.5 mm over length 54.1 mm (from Z=0.0 to Z=54.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø62.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø56.7 mm over length 53.1 mm (from Z=0.0 to Z=147.8).\n10. Finish turn diameter Ø53.4 mm over length 7.1 mm (from Z=0.0 to Z=94.7).\n11. Finish turn diameter Ø49.4 mm over length 43.6 mm (from Z=0.0 to Z=87.6).\n12. Finish turn diameter Ø33.9 mm over length 44.0 mm (from Z=0.0 to Z=44.0).\n13. Break all edges (e.g., 2×45° where applicable).\n14. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03710", "images": ["images/Shaft_03710.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø51.4 mm and length at least 324.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.4 mm over length 128.3 mm (from Z=0.0 to Z=128.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.5 mm over length 18.8 mm (from Z=0.0 to Z=191.6).\n10. Finish turn diameter Ø37.6 mm over length 37.9 mm (from Z=0.0 to Z=172.8).\n11. Finish turn diameter Ø30.0 mm over length 134.9 mm (from Z=0.0 to Z=134.9).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01222", "images": ["images/Shaft_01222.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø60.5 mm and length at least 177.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.5 mm over length 27.0 mm (from Z=0.0 to Z=27.0).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø45.5 mm over length 29.4 mm (from Z=0.0 to Z=145.7).\n10. Finish turn diameter Ø30.0 mm over length 116.3 mm (from Z=0.0 to Z=116.3).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01201", "images": ["images/Shaft_01201.png", "detail_png/Shaft_01201_length.png", "detail_png/Shaft_01201_diam.png", "detail_png/Shaft_01201_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø58.7 mm and length at least 191.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.7 mm over length 48.1 mm (from Z=0.0 to Z=48.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.7 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø50.1 mm over length 11.6 mm (from Z=0.0 to Z=138.2).\n9. Finish turn diameter Ø42.6 mm over length 48.4 mm (from Z=0.0 to Z=126.6).\n10. Finish turn diameter Ø31.0 mm over length 30.9 mm (from Z=0.0 to Z=78.2).\n11. Finish turn diameter Ø30.0 mm over length 47.3 mm (from Z=0.0 to Z=47.3).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00001", "images": ["images/Shaft_00001.png", "detail_png/Shaft_00001_length.png", "detail_png/Shaft_00001_diam.png", "detail_png/Shaft_00001_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø65.6 mm and length at least 129.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø63.6 mm over length 40.4 mm (from Z=0.0 to Z=40.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø63.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø48.5 mm over length 48.4 mm (from Z=0.0 to Z=83.8).\n9. Finish turn diameter Ø30.0 mm over length 35.4 mm (from Z=0.0 to Z=35.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01138", "images": ["images/Shaft_01138.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø38.4 mm and length at least 65.8 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø36.4 mm over length 20.1 mm (from Z=0.0 to Z=20.1).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø36.4 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 40.7 mm (from Z=0.0 to Z=40.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01782", "images": ["images/Shaft_01782.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø35.5 mm and length at least 250.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø33.5 mm over length 49.4 mm (from Z=0.0 to Z=49.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø33.5 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 195.7 mm (from Z=0.0 to Z=195.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00741", "images": ["images/Shaft_00741.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø32.0 mm and length at least 239.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 164.3 mm (from Z=0.0 to Z=164.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø22.5 mm over length 69.8 mm (from Z=0.0 to Z=69.8).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00503", "images": ["images/Shaft_00503.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø44.2 mm and length at least 69.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø42.2 mm over length 12.5 mm (from Z=0.0 to Z=12.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø42.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 51.5 mm (from Z=0.0 to Z=51.5).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04049", "images": ["images/Shaft_04049.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø66.2 mm and length at least 160.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø64.2 mm over length 8.8 mm (from Z=0.0 to Z=8.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø64.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø59.0 mm over length 69.6 mm (from Z=0.0 to Z=146.8).\n9. Finish turn diameter Ø55.1 mm over length 77.2 mm (from Z=0.0 to Z=77.2).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02682", "images": ["images/Shaft_02682.png", "detail_png/Shaft_02682_length.png", "detail_png/Shaft_02682_diam.png", "detail_png/Shaft_02682_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø60.8 mm and length at least 280.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø58.8 mm over length 22.2 mm (from Z=0.0 to Z=22.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø58.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø44.2 mm over length 59.9 mm (from Z=0.0 to Z=252.9).\n10. Finish turn diameter Ø30.0 mm over length 193.0 mm (from Z=0.0 to Z=193.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03104", "images": ["images/Shaft_03104.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø40.9 mm and length at least 135.0 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.9 mm over length 24.3 mm (from Z=0.0 to Z=24.3).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.9 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø32.5 mm over length 30.1 mm (from Z=0.0 to Z=105.7).\n9. Finish turn diameter Ø30.0 mm over length 75.6 mm (from Z=0.0 to Z=75.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00890", "images": ["images/Shaft_00890.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø32.0 mm and length at least 210.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 99.2 mm (from Z=0.0 to Z=99.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø29.7 mm over length 106.7 mm (from Z=0.0 to Z=106.7).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00570", "images": ["images/Shaft_00570.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø67.8 mm and length at least 141.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø65.8 mm over length 38.4 mm (from Z=0.0 to Z=38.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø65.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø56.6 mm over length 23.6 mm (from Z=0.0 to Z=97.9).\n9. Finish turn diameter Ø49.2 mm over length 74.3 mm (from Z=0.0 to Z=74.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03324", "images": ["images/Shaft_03324.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø70.1 mm and length at least 259.6 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø68.1 mm over length 71.2 mm (from Z=0.0 to Z=71.2).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø68.1 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø54.8 mm over length 64.7 mm (from Z=0.0 to Z=183.4).\n10. Finish turn diameter Ø44.6 mm over length 105.3 mm (from Z=0.0 to Z=118.7).\n11. Finish turn diameter Ø40.8 mm over length 13.4 mm (from Z=0.0 to Z=13.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02523", "images": ["images/Shaft_02523.png", "detail_png/Shaft_02523_length.png", "detail_png/Shaft_02523_diam.png", "detail_png/Shaft_02523_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø32.3 mm and length at least 288.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.3 mm over length 49.8 mm (from Z=0.0 to Z=49.8).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 233.3 mm (from Z=0.0 to Z=233.3).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01443", "images": ["images/Shaft_01443.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø53.6 mm and length at least 74.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø51.6 mm over length 20.7 mm (from Z=0.0 to Z=20.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø51.6 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.6 mm over length 14.7 mm (from Z=0.0 to Z=48.4).\n9. Finish turn diameter Ø32.6 mm over length 9.9 mm (from Z=0.0 to Z=33.7).\n10. Finish turn diameter Ø30.0 mm over length 23.8 mm (from Z=0.0 to Z=23.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03647", "images": ["images/Shaft_03647.png", "detail_png/Shaft_03647_length.png", "detail_png/Shaft_03647_diam.png", "detail_png/Shaft_03647_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø75.2 mm and length at least 73.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø73.2 mm over length 15.9 mm (from Z=0.0 to Z=15.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø73.2 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø57.1 mm over length 16.5 mm (from Z=0.0 to Z=53.0).\n9. Finish turn diameter Ø50.7 mm over length 18.1 mm (from Z=0.0 to Z=36.5).\n10. Finish turn diameter Ø45.0 mm over length 13.4 mm (from Z=0.0 to Z=18.4).\n11. Finish turn diameter Ø39.9 mm over length 5.0 mm (from Z=0.0 to Z=5.0).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00799", "images": ["images/Shaft_00799.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø81.3 mm and length at least 310.7 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø79.3 mm over length 79.6 mm (from Z=0.0 to Z=79.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø79.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø72.3 mm over length 163.1 mm (from Z=0.0 to Z=226.1).\n10. Finish turn diameter Ø57.1 mm over length 63.0 mm (from Z=0.0 to Z=63.0).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04547", "images": ["images/Shaft_04547.png", "detail_png/Shaft_04547_length.png", "detail_png/Shaft_04547_diam.png", "detail_png/Shaft_04547_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø51.9 mm and length at least 313.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø49.9 mm over length 95.7 mm (from Z=0.0 to Z=95.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø49.9 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø42.9 mm over length 102.4 mm (from Z=0.0 to Z=213.2).\n10. Finish turn diameter Ø30.2 mm over length 110.8 mm (from Z=0.0 to Z=110.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_02665", "images": ["images/Shaft_02665.png", "detail_png/Shaft_02665_length.png", "detail_png/Shaft_02665_diam.png", "detail_png/Shaft_02665_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø39.8 mm and length at least 101.4 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø37.8 mm over length 42.7 mm (from Z=0.0 to Z=42.7).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø37.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø30.0 mm over length 53.7 mm (from Z=0.0 to Z=53.7).\n9. Break all edges (e.g., 2×45° where applicable).\n10. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03792", "images": ["images/Shaft_03792.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 16MnCr5) with diameter at least Ø40.8 mm and length at least 299.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø38.8 mm over length 104.6 mm (from Z=0.0 to Z=104.6).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø38.8 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 189.6 mm (from Z=0.0 to Z=189.6).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00936", "images": ["images/Shaft_00936.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø58.0 mm and length at least 209.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø56.0 mm over length 46.4 mm (from Z=0.0 to Z=46.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø56.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø41.5 mm over length 45.1 mm (from Z=0.0 to Z=157.7).\n10. Finish turn diameter Ø35.6 mm over length 24.8 mm (from Z=0.0 to Z=112.6).\n11. Finish turn diameter Ø30.0 mm over length 87.8 mm (from Z=0.0 to Z=87.8).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_03986", "images": ["images/Shaft_03986.png", "detail_png/Shaft_03986_length.png", "detail_png/Shaft_03986_diam.png", "detail_png/Shaft_03986_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a stainless steel round bar (material 1.4301) with diameter at least Ø73.3 mm and length at least 290.1 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø71.3 mm over length 54.5 mm (from Z=0.0 to Z=54.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø71.3 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø58.1 mm over length 51.0 mm (from Z=0.0 to Z=230.6).\n10. Finish turn diameter Ø49.4 mm over length 37.1 mm (from Z=0.0 to Z=179.6).\n11. Finish turn diameter Ø40.5 mm over length 47.9 mm (from Z=0.0 to Z=142.5).\n12. Finish turn diameter Ø35.6 mm over length 56.8 mm (from Z=0.0 to Z=94.6).\n13. Finish turn diameter Ø30.0 mm over length 37.8 mm (from Z=0.0 to Z=37.8).\n14. Break all edges (e.g., 2×45° where applicable).\n15. Remove the workpiece from the lathe."}]} +{"id": "Shaft_04703", "images": ["images/Shaft_04703.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø69.0 mm and length at least 219.2 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø67.0 mm over length 58.4 mm (from Z=0.0 to Z=58.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø67.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø50.4 mm over length 25.9 mm (from Z=0.0 to Z=155.8).\n10. Finish turn diameter Ø46.8 mm over length 64.5 mm (from Z=0.0 to Z=129.9).\n11. Finish turn diameter Ø30.0 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n12. Break all edges (e.g., 2×45° where applicable).\n13. Remove the workpiece from the lathe."}]} +{"id": "Shaft_00638", "images": ["images/Shaft_00638.png"], "conversations": [{"from": "user", "value": "\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material 42CrMo4) with diameter at least Ø32.4 mm and length at least 244.9 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.4 mm over length 174.5 mm (from Z=0.0 to Z=174.5).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.4 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø30.0 mm over length 65.4 mm (from Z=0.0 to Z=65.4).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01417", "images": ["images/Shaft_01417.png", "detail_png/Shaft_01417_length.png", "detail_png/Shaft_01417_diam.png", "detail_png/Shaft_01417_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a aluminium alloy round bar (material EN AW-6082) with diameter at least Ø56.8 mm and length at least 105.5 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø54.8 mm over length 19.9 mm (from Z=0.0 to Z=19.9).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø54.8 mm.\n6. Face the end and set Z=0.\n7. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n8. Finish turn diameter Ø46.0 mm over length 24.8 mm (from Z=0.0 to Z=80.6).\n9. Finish turn diameter Ø38.6 mm over length 22.0 mm (from Z=0.0 to Z=55.8).\n10. Finish turn diameter Ø30.0 mm over length 33.8 mm (from Z=0.0 to Z=33.8).\n11. Break all edges (e.g., 2×45° where applicable).\n12. Remove the workpiece from the lathe."}]} +{"id": "Shaft_01934", "images": ["images/Shaft_01934.png", "detail_png/Shaft_01934_length.png", "detail_png/Shaft_01934_diam.png", "detail_png/Shaft_01934_title.png"], "conversations": [{"from": "user", "value": "\n\n\n\nGenerate the machining process for the shaft in the image. Use the exact 10–11 step template."}, {"from": "assistant", "value": "1. Select a steel round bar (material C45) with diameter at least Ø32.0 mm and length at least 219.3 mm to allow machining allowances.\n2. Mount the bar in a three-jaw chuck.\n3. Face the end.\n4. Finish turn the holding diameter Ø30.0 mm over length 153.4 mm (from Z=0.0 to Z=153.4).\n5. Mount the bar in a three-jaw chuck by the holding diameter Ø30.0 mm.\n6. Face the end and set Z=0.\n7. Center-drill the free end and support the bar with tail support.\n8. Rough turn the remaining outer surfaces leaving ~0.5–1.0 mm stock per side for finishing.\n9. Finish turn diameter Ø18.0 mm over length 60.9 mm (from Z=0.0 to Z=60.9).\n10. Break all edges (e.g., 2×45° where applicable).\n11. Remove the workpiece from the lathe."}]}