Input: I have material name like this  ===  FLANGEOLET,RF,0.5INCH,XXS,300LB,THR,NPT,MALE,A105,BLACK,150MM OAL,AS PER MHK-COMP-SPE-EP- PVV- 0145,ALSO KNOWN AS EXTENDED FLANGE  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FITTING, PIPE, TYPE : FLANGEOLET, NOMINAL SIZE : 1/2 IN, END CONNECTION : RAISED FACE,MALE NPT THREADED, PRESSURE RATING : CLASS 300, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A105, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : SCH XXS,VARNISH BLACK,150 MM OAL,ALSO KNOWN AS EXTENDED FLANGE, INTERNAL REMARKS : AS PER MHK-COMP-SPE-EP- PVV- 0145


Input: I have material name like this  ===  PLUG; TYPE : CAP ; SIZE : 2" ; MATERIAL : 316 SS ; PART NUMBER : 53015K85 ; MANUFACTURER NAME : @MCMASTER ; ADDITIONAL INFO 1 : WITH NON LOCKING LEVERS  ===  Please inform me parameter below:  TYPE  SIZE  MATERIAL  TEMPERATURE RATING  COLOR  PACKAGE TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PLUG, END, TYPE : CAP, SIZE : 2 IN, MATERIAL : STAINLESS STEEL-316, TEMPERATURE RATING : -, COLOR : -, PACKAGE TYPE : -, PART NUMBER : 53015K85, MANUFACTURER : MCMASTER-CARR, ADDITIONAL DETAILS : WITH NON LOCKING LEVERS, INTERNAL REMARKS : -


Input: I have material name like this  ===  NIPPLE, DOUBLE, COPPER FITTING, FOR PEX HOSE DIAMETER 16 MM, P/N: 1/2 M, , MANUFACTURER: WESTPEX NOTE: FOR CHLORINE INJECTION LINE  ===  Please inform me parameter below:  TYPE  SIZE  LENGTH  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, HOSE, TYPE : DOUBLE, SIZE : 16 MM, LENGTH : -, END CONNECTION : COPPER FITTING, SCHEDULE NUMBER : -, PRESSURE RATING : -, WALL THICKNESS : -, MATERIAL : -, MATERIAL STANDARD : -, COATING/FINISH : -, TEMPERATURE RATING : -, PART NUMBER : 1/2M, MANUFACTURER : BURGMANN, ADDITIONAL DETAILS : FOR PEX,WESTPEX NOTE: FOR CHLORINE INJECTION LINE, INTERNAL REMARKS : -


Input: I have material name like this  ===  1" DIA X 360 MM LGC/W. TWO HEX HEAD NUTSFLUOROCARBON COATED AMICOTE BOLTS TO ASTM A-193, GRADE B7,BOLTS TO ASTM A-193, GRADE B7,  ===  Please inform me parameter below:  DESIGN STANDARD  STUD BOLT MATERIAL  STUD BOLT MATERIAL STANDARD  NUT TYPE  NUT MATERIAL STANDARD  COATING/FINISH  NUMBER OF NUT(S) PER STUD BOLT  THREAD CLASS SYMBOL(BOLT/NUT)  THREAD TYPE  THREAD COARSE PITCH  THREAD LENGTH  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD BOLT, WITH NUT, DESIGN STANDARD : -, STUD BOLT MATERIAL : -, STUD BOLT MATERIAL STANDARD : BOLT: ASTM A193 GRADE B7, NUT TYPE : -, NUT MATERIAL STANDARD : -, COATING/FINISH : FLUOROCARBON COATED AMICOTE, NUMBER OF NUT(S) PER STUD BOLT : -, THREAD CLASS SYMBOL(BOLT/NUT) : -, THREAD TYPE : -, THREAD COARSE PITCH : -, THREAD LENGTH : -, SIZE : 1 IN, LENGTH : 360 MM, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : C/W. TWO HEX HEAD NUTS, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT, MACHINE, FULL THREAD, COOPER IND, 2-01F-033-032-007, CARBON STEEL, 1/2 IN, 3/4 IN LG, STAND COTE  ===  Please inform me parameter below:  TYPE  HEAD TYPE  SIZE  THREAD TYPE  UNDER HEAD LENGTH  LENGTH  MATERIAL  MATERIAL STANDARD  COATING/FINISH  TENSILE STRENGTH  DRIVE TYPE  THREAD DIRECTION  HEAD SIZE  LOAD RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BOLT, MACHINE, TYPE : FULL THREADED, HEAD TYPE : -, SIZE : 1/2 IN, THREAD TYPE : -, UNDER HEAD LENGTH : -, LENGTH : 3/4 IN, MATERIAL : CARBON STEEL, MATERIAL STANDARD : -, COATING/FINISH : -, TENSILE STRENGTH : -, DRIVE TYPE : -, THREAD DIRECTION : -, HEAD SIZE : -, LOAD RATING : -, PART NUMBER : 2-01F-033-032-007,STAND COTE, MANUFACTURER : COOPER, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  PAINT,ALKYD ENAMEL,DARK GREY,FINISHTYPE : ALKYD ENAMELCOLOR : DARK GREYFINISH : FINISHADD_DETL : USED FOR COATING OF TRANSMITTER, N2 RECOMMENDED BRAND DANAPAINT, JOTUN, HEMPEL ANDINTERNATIONAL PAINT  ===  Please inform me parameter below:  BASE MATERIAL  TRADE NAME  COLOR  COLOR STANDARD  COMPOSITION  PACKAGING  APPLICATION  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PAINT, ENAMEL, BASE MATERIAL : -, TRADE NAME : -, COLOR : DARK GREY, COLOR STANDARD : -, COMPOSITION : -, PACKAGING : -, APPLICATION : -, MANUFACTURER : DANAPAINT,JOTUN,HEMPEL, PART NUMBER : -, ADDITIONAL DETAILS : PAINT,ALKYD ENAMEL,FINISHTYPE: ALKYD ENAMELCOLOR: FINISH: FINISHADD_DETL: USED FOR COATING OF TRANSMITTER,N2 RECOMMENDED ANDINTERNATIONAL PAINT, INTERNAL REMARKS : -


Input: I have material name like this  ===  FREON, REFRIGERANT,R-410A, BOTTLE OF 25 LBS, COMPLETE WITH MATERIAL SAFETY DATA SHEET (MSDS) AND 12 MONTHS WARRANTY PERIOD  ===  Please inform me parameter below:  TYPE  CAS NUMBER  CHEMICAL FORMULA  PHYSICAL FORM  SPECIFIC GRAVITY  MELTING POINT  VAPOR PRESSURE  VAPOR DENSITY  PACKAGING UNIT  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GAS, REFRIGERANT, TYPE : FREON, CAS NUMBER : -, CHEMICAL FORMULA : -, PHYSICAL FORM : -, SPECIFIC GRAVITY : -, MELTING POINT : -, VAPOR PRESSURE : -, VAPOR DENSITY : -, PACKAGING UNIT : BOTTLE OF 25 LBS, PART NUMBER : R-410A, MANUFACTURER : -, ADDITIONAL DETAILS : REFRIGERANT,COMPLETE WITH MATERIAL SAFETY DATA SHEET (MSDS) AND 12 MONTHS WARRANTY PERIOD, INTERNAL REMARKS : -


Input: I have material name like this  ===  FORM: CPI, F-049-NEW 05/97 ENVELOPE YELLOW, CONFIDENTIAL FORM: CPI, F-049-NEW 05/97 ENVE- LOPE LIGHT YELLOW CONFIDENTIAL INTERDEPARTMENT, 11 X 15 10 PCS/PKG MEC NO: 315421049 HS NO: 000000000  ===  Please inform me parameter below:  ITEM NAME  COLOR  FORM OF SUPPLY  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REQUISITES, OFFICE, ITEM NAME : FORM,ENVELOPE, COLOR : YELLOW, FORM OF SUPPLY : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : CPI,F-049-NEW 05/97,CONFIDENTIAL CPI,F-049-NEW 05/97 ENVE- LOPE LIGHT CONFIDENTIAL INTERDEPARTMENT,11 X 15 10 PCS/PKG MEC NO: 315421049 HS NO: 000000000, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELEMENT,FILTER, MANUFACTURER: MP FILTRI, PART NUMBER: SP-HP-0651-A10AH, ADDITIONAL DETAILS: F/DISCHARGE LINE  ===  Please inform me parameter below:  TYPE  FILTER RATING  SERVICE  MATERIAL  SIZE  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELEMENT, FILTER, TYPE : -, FILTER RATING : -, SERVICE : -, MATERIAL : -, SIZE : -, MANUFACTURER : MP FILTRI, PART NUMBER : SP-HP-0651-A10AH, ADDITIONAL DETAILS : F/DISCHARGE LINE, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET, SPIRAL WOUND, 316L STAINLESS STEEL WINDING, GRAPHITE FILLER, 316L STAINLESS STL INNER RING, CARBON STEEL OUTER RING, 600 LB, ASME B16.20, CADMIUM PLATED, 12 IN, HOOP 316L SSTL  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  GASKET THICKNESS  WINDING MATERIAL  FILLER MATERIAL  INNER RING MATERIAL  CENTER RING MATERIAL  PRESSURE RATING  INNER RING THICKNESS  CENTER RING THICKNESS  WINDING MATERIAL STANDARD  INNER RING MATERIAL STANDARD  CENTER RING MATERIAL STANDARD  SERVICE  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GASKET, SPIRAL WOUND, TYPE : -, NOMINAL SIZE : 12 IN, GASKET THICKNESS : -, WINDING MATERIAL : STAINLESS STEEL-316L, FILLER MATERIAL : GRAPHITE, INNER RING MATERIAL : STAINLESS STEEL-316L, CENTER RING MATERIAL : CARBON STEEL, PRESSURE RATING : CLASS 600, INNER RING THICKNESS : -, CENTER RING THICKNESS : -, WINDING MATERIAL STANDARD : -, INNER RING MATERIAL STANDARD : -, CENTER RING MATERIAL STANDARD : -, SERVICE : -, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : ASME B16.20,CADMIUM PLATED,HOOP, INTERNAL REMARKS : -


Input: I have material name like this  ===  BEAM,STRUCTURAL TYPE : I-TYPE HEIGHT : 300MM WIDTH : 150MM FLANGE THICKNESS : 9MM WEB THICKNESS : 6.5MM LENGTH : 12M MATERIAL : MILD STEEL SPECIFICATION OR STD DATA : ASTM A36"  ===  Please inform me parameter below:  TYPE  MATERIAL  MATERIAL STANDARD  COATING/FINISH  TENSILE STRENGTH  WIDTH  HEIGHT  WEB THICKNESS  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BEAM, METALLIC, TYPE : I-TYPE, MATERIAL : MILD STEEL, MATERIAL STANDARD : ASTM A36, COATING/FINISH : -, TENSILE STRENGTH : -, WIDTH : 150 MM, HEIGHT : 300 MM, WEB THICKNESS : 6.5MM, LENGTH : 12 M, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : FLANGE THCKNESS : 9MM, INTERNAL REMARKS : -


Input: I have material name like this  ===  MODEL : XH13-2V40-BNQ LEVELCONTROL MAXIMUM PRESSURE : 740PSIG INPUT:120 VAC,50/60 HZ, OUTPUT :15 AMPS MFR : OUTPUT :15 AMPS  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  POWER RATING  FREQUENCY  MOUNTING TYPE  TEMPERATURE RATING  ACTION  ENCLOSURE TYPE  ENCLOSURE RATING  CONTACT CONFIGURATION  OPERATOR TYPE  PRESSURE RATING  PROCESS CONNECTION  MEASURING RANGE  MATERIAL  DIMENSION  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SWITCH, LEVEL, TYPE : CONTROL, VOLTAGE RATING : 120 VAC, CURRENT RATING : 15 A, POWER RATING : -, FREQUENCY : 50/60 HZ, MOUNTING TYPE : -, TEMPERATURE RATING : -, ACTION : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, CONTACT CONFIGURATION : -, OPERATOR TYPE : -, PRESSURE RATING : 740 PSI, PROCESS CONNECTION : -, MEASURING RANGE : -, MATERIAL : -, DIMENSION : -, MODEL NUMBER : XH13-2V40-BNQ, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  BATTERY; TYPE : BULCK PACK ; VOLTAGE : 9 VOLT ; SERIAL NUMBER : 522-EN ; MODEL : 50938 ; ADDITIONAL INFO 1 : REF. ENERGIZER CATALOG  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CAPACITY  NUMBER OF CELLS  DISCHARGE RATING  TERMINAL TYPE  SIZE  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BATTERY PACK, TYPE : -, VOLTAGE RATING : 9 V, CAPACITY : -, NUMBER OF CELLS : -, DISCHARGE RATING : -, TERMINAL TYPE : -, SIZE : -, MANUFACTURER : ENERGIZER, PART NUMBER : -, ADDITIONAL DETAILS : TYPE: BULCK,SERIAL NUMBER: 522-EN,MODEL: 50938, INTERNAL REMARKS : -


Input: I have material name like this  ===  SCREW: WOOD, CS, FLAT HEAD, SLOT DRIVE, 8 IN X 1.5 IN SCREW: WOOD, CS, FLAT HEAD, SLOT DRIVE # 8 X 1-1/2 144 PCS/BX  ===  Please inform me parameter below:  TYPE  MATERIAL  MATERIAL STANDARD  COATING  THREAD TYPE  DIAMETER  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SCREW, WOOD, TYPE : FLAT HEAD,SLOT DRIVE, MATERIAL : CARBON STEEL, MATERIAL STANDARD : -, COATING : -, THREAD TYPE : -, DIAMETER : 8 IN, LENGTH : 1-1/2 IN, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : 144 PCS/BX, INTERNAL REMARKS : -


Input: I have material name like this  ===  CABLE/WIRE MARKER TYPE : SLIP-ON P/N : HOBS85/4 MODEL : NO.#4 DIMENSION : 2.5-6MM MARKER LENGTH : 4MM COLOR : BLACK/WHITE MATERIAL : PLASTIC PACKING QTY : 100PCS BRAND : HELLERMAN  ===  Please inform me parameter below:  TYPE  DESIGN  MATERIAL  COLOR  TEMPERATURE RATING  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: MARKER, CABLE, TYPE : SLIP-ON, DESIGN : -, MATERIAL : PLASTIC, COLOR : BLACK/WHITE, TEMPERATURE RATING : -, SIZE : -, PART NUMBER : HOBS85/4, MANUFACTURER : HELLERMANN TYTON, ADDITIONAL DETAILS : CABLE/WIRE MARKER TYPE: MODEL: NO.4 DIMENSION: 2.5-6MM MARKER LENGTH: 4MM COLOR: MATERIAL: PACKING QTY: 100PCS, INTERNAL REMARKS : -


Input: I have material name like this  ===  CONNECTOR, STRAIN RELIEF, LIQUID TIGHT, THOMAS & BETTS CORP, 2673, NON METALLIC, 1/2 IN, MNPT , CORD: 0.400-0.560 IN, MODEL: FLEXIBLE CORD AND POWER CABLE CONNECTORS  ===  Please inform me parameter below:  TYPE  TUBE MATERIAL  BODY AND NUT MATERIAL  FERRULE MATERIAL  SEALING RING MATERIAL  THREAD DESIGN STANDARD  SIZE(O.D TUBE X THREADED END)  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CONNECTOR, TUBE, TYPE : STRAIN RELIEF,LIQUID TIGHT, TUBE MATERIAL : -, BODY AND NUT MATERIAL : NON METALLIC, FERRULE MATERIAL : -, SEALING RING MATERIAL : -, THREAD DESIGN STANDARD : -, SIZE(O.D TUBE X THREADED END) : 1/2 IN MNPT, PART NUMBER : 2673, MANUFACTURER : THOMAS AND BETTS, ADDITIONAL DETAILS : CORD: 0.400-0.560 IN,MODEL: FLEXIBLE CORD AND POWER CABLE CONNECTORS, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELBOW: TUBE, 3/8 T X 3/8 T, SWAGELOK SS-600-9 ELBOW: TUBE, 3/8 T X 3/8 T, UNION ELBOW SWAGELOK SS-600-9, PARKER 6EE6-316/ 6EE6-SSORIGINAL CERTIFICATE OF MATERIAL;  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  ANGLE  RADIUS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELBOW, TUBE, TYPE : UNION, NOMINAL SIZE : 3/8 X 3/8 IN, END CONNECTION : -, PRESSURE RATING : -, ANGLE : -, RADIUS : -, MATERIAL : STAINLESS STEEL, MATERIAL STANDARD : -, COATING/FINISH : -, PART NUMBER : 6EE6-316, MANUFACTURER : PARKER HANNIFIN, ADDITIONAL DETAILS : SWAGELOK SS-600-9,ORIGINAL CERTIFICATE OF MATERIAL, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELEMENT,FILTER,FUELTYPE : ELEMENTELEMENT MATERIAL : PAPERMANUFACTURE : BALDWINORDER NUMBER : F844-AADDITIONAL DETAIL :  ===  Please inform me parameter below:  TYPE  FILTER RATING  SERVICE  MATERIAL  SIZE  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELEMENT, FILTER, TYPE : -, FILTER RATING : -, SERVICE : FUEL, MATERIAL : PAPER, SIZE : -, MANUFACTURER : BALDWIN, PART NUMBER : F844-A, ADDITIONAL DETAILS : TYPE: ELEMENTELEMENT MATERIAL ORDER NUMBER: ADDITIONAL DETAIL, INTERNAL REMARKS : -


Input: I have material name like this  ===  CLOTH; SIZE : M ; ADDITIONAL INFO 1 : SLEEVES, SAFETY,RED COVERALL C/W PREMIER OIL ; ADDITIONAL INFO 2 : LOGO AND NAME, AMERICAN COTTON  ===  Please inform me parameter below:  TYPE  APPLICATION  STYLE  MATERIAL  COLOR  SIZE  TEMPERATURE RATING  PACKAGING UNIT  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SAFETY WEAR, PERSONAL PROTECTION, TYPE : SLEEVES,SAFETY, APPLICATION : -, STYLE : -, MATERIAL : -, COLOR : RED, SIZE : M, TEMPERATURE RATING : -, PACKAGING UNIT : -, MANUFACTURER : -, PART NUMBER : -, ADDITIONAL DETAILS : ADDITIONAL INFO 1:,COVERALL C/W PREIER OIL,ADDITIONAL INFO 2: LOGO AND NAE,AERICAN COTTON, INTERNAL REMARKS : -


Input: I have material name like this  ===  TEE,TUBE TYPE : UNION RUN CONNECTION DATA : 3/8IN COMPRESSION BRANCH CONNECTION DATA : 3/8IN COMPRESSION MATERIAL : 316 STAINLESS STEEL  ===  Please inform me parameter below:  TYPE  NOMINAL RUN SIZE  NOMINAL BRANCH SIZE  RUN CONNECTION  BRANCH CONNECTION  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TEE, TUBE, TYPE : COMPRESSION, NOMINAL RUN SIZE : 3/8 IN, NOMINAL BRANCH SIZE : 3/8 IN, RUN CONNECTION : -, BRANCH CONNECTION : -, PRESSURE RATING : -, MATERIAL : STAINLESS STEEL-316, MATERIAL STANDARD : -, COATING/FINISH : -, LENGTH : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : UNION, INTERNAL REMARKS : -


Input: I have material name like this  ===  FORM: CPI, F-045-NEW 05/97 ENVELOPE, YELLOW INTER.DEPT. FORM: CPI, F-045-NEW 05/97, ENVELOPE, YELLOW INTER DEPART- MENT, 4-1/2X9-1/2, 10 PCS/PK MEC NO: 315421045 HS NO: 000000000  ===  Please inform me parameter below:  ITEM NAME  COLOR  FORM OF SUPPLY  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REQUISITES, OFFICE, ITEM NAME : FORM,ENVELOPE, COLOR : YELLOW, FORM OF SUPPLY : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : CPI,F-045-NEW 05/97,INTER.DEPT. CPI,F-045-NEW 05/97,INTER DEPART- MENT,4-1/2X9-1/2,10 PCS/PK, INTERNAL REMARKS : MEC NO: 315421045 HS NO: 000000000


Input: I have material name like this  ===  1/2" DIA X 75 MM LGSTAINLESS STEELC/W TWO HEX-HEAD NUTS BOLT ASTM A193 B8,NUT A194 GR8BOLT ASTM A193 B8,NUT A194 GR8  ===  Please inform me parameter below:  DESIGN STANDARD  STUD BOLT MATERIAL  STUD BOLT MATERIAL STANDARD  NUT TYPE  NUT MATERIAL STANDARD  COATING/FINISH  NUMBER OF NUT(S) PER STUD BOLT  THREAD CLASS SYMBOL(BOLT/NUT)  THREAD TYPE  THREAD COARSE PITCH  THREAD LENGTH  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD BOLT, WITH NUT, DESIGN STANDARD : -, STUD BOLT MATERIAL : STAINLESS STEEL, STUD BOLT MATERIAL STANDARD : BOLT: ASTM A193 GRADE B8,NUT: ASTM A194 GRADE 8, NUT TYPE : -, NUT MATERIAL STANDARD : -, COATING/FINISH : -, NUMBER OF NUT(S) PER STUD BOLT : -, THREAD CLASS SYMBOL(BOLT/NUT) : -, THREAD TYPE : -, THREAD COARSE PITCH : -, THREAD LENGTH : -, SIZE : 1/2 IN, LENGTH : 75 MM, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : C/W TWO HEX-HEAD NUTS BOLT, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE,LINE, PIPE SIZE: 4 X OD. 4-1/2 X WT: 0.237 IN, MATERIAL: CARBON STEEL, ADDITIONAL DETAILS: SEAMLESS,SCH.40,API 5L,GR.B/ASTM  ===  Please inform me parameter below:  DESIGN STANDARD  PIPE SIZE  SIZE OF BORE  LENGTH RANGE  WEIGHT  CONNECTION  MATERIAL STANDARD  MATERIAL  INTERNAL COATING/FINISH  TOOL JOINT STANDARD  TOOL JOINT TYPE  TOOL JOINT HARDFACING  SERVICE  INSPECTION CERTIFICATE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, LINE, DESIGN STANDARD : -, PIPE SIZE : 4 X OD. 4-1/2 X WT: 0.237 IN, SIZE OF BORE : -, LENGTH RANGE : -, WEIGHT : -, CONNECTION : -, MATERIAL STANDARD : -, MATERIAL : CARBON STEEL, INTERNAL COATING/FINISH : -, TOOL JOINT STANDARD : -, TOOL JOINT TYPE : -, TOOL JOINT HARDFACING : -, SERVICE : -, INSPECTION CERTIFICATE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : SEAMLESS,SCH.40,API 5L,GR.B/ASTM, INTERNAL REMARKS : -


Input: I have material name like this  ===  SIZE : 3/4" X1",SCREWED,MALLEABLE IRONGALVANIZED,HEXAGON HEAD TO ES 31, FEMALE CONNECTION 31, FEMALE CONNECTION  ===  Please inform me parameter below:  TYPE  SIZE  END CONNECTION  OUTSIDE DIAMETER  LENGTH  MATERIAL  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REDUCER, CONDUIT, TYPE : -, SIZE : 3/4 X 1 IN, END CONNECTION : -, OUTSIDE DIAMETER : -, LENGTH : -, MATERIAL : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : SCREWED,MALLEABLE IRONGALVANIZED,HEXAGON HEAD TO ES 31,FEMALE CONNECTION 31,FEMALE CONNECTION, INTERNAL REMARKS : -


Input: I have material name like this  ===  SOCKET; TYPE : SOLCONEX 16 A SWITCH SOCKET ; ACTION : 9 H ; VOLTAGE : 200+éGé¼-ª250 VOLTS ; NUMBER OF POLES : 4 P (3 P + EARTH) ; COLOR : BLUE ; PART NUMBER : 8570/11-409 ; MANUFACTURER NAME : STAHL  ===  Please inform me parameter below:  TYPE  CONFIGURATION  NUMBER OF POLES  VOLTAGE RATING  CURRENT RATING  CONNECTION TYPE  MOUNTING TYPE  MATERIAL  COLOR  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SOCKET, ELECTRICAL, TYPE : -, CONFIGURATION : 3 POLE + EARTH, NUMBER OF POLES : 4, VOLTAGE RATING : 200 TO 250 V, CURRENT RATING : 16 A, CONNECTION TYPE : -, MOUNTING TYPE : -, MATERIAL : -, COLOR : BLUE, PART NUMBER : 8570/11-409, MANUFACTURER : STAHL, ADDITIONAL DETAILS : ACTION: 9 H, INTERNAL REMARKS : -


Input: I have material name like this  ===  DETECTOR, GAS; DETECTOR TYPE: MF601EX; MEDIA FOR WHICH DESIGNED: SMOKE; OPERATION METHOD: OPEN TYPE OPER; MATERIAL: FR110 'BAYBLEND' FIRE RESISTANTPART NUMBER: MR601TEX; MANUFACTURER: THORN SECURITY  ===  Please inform me parameter below:  TYPE  RANGE  OUTPUT  MATERIAL  VOLTAGE RATING  TEMPERATURE RATING  MOUNTING TYPE  POWER SUPPLY  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: DETECTOR, GAS, TYPE : -, RANGE : -, OUTPUT : -, MATERIAL : -, VOLTAGE RATING : -, TEMPERATURE RATING : -, MOUNTING TYPE : -, POWER SUPPLY : -, MODEL NUMBER : -, PART NUMBER : MR601TEX, MANUFACTURER : THORN SECURITY, ADDITIONAL DETAILS : TYPE: MF601EX,MEDIA FOR WHICH DESIGNED: SMOKE,OPERATION METHOD: OPEN TYPE OPER,MATERIAL: FR110 BAYBLEND FIRE RESISTANT, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELECTRODE: 3.2 MM, E-7018, AWS AC/DC, ESAB USE IN 77202 ELECTRODE: 3.2 MM, E-7018, AWS CLASS, AC/DC, ESAB 20 KG/CAN USE IN 77202 MEC NO: 607105010 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  APPLICATION  TRADE NAME  MATERIAL  WELDING STANDARD  CURRENT RATING  DIAMETER  LENGTH  WEIGHT  PACKAGING UNIT  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELECTRODE, WELDING, TYPE : -, APPLICATION : -, TRADE NAME : -, MATERIAL : -, WELDING STANDARD : E7018, CURRENT RATING : -, DIAMETER : 3.20 MM, LENGTH : -, WEIGHT : -, PACKAGING UNIT : -, PART NUMBER : -, MANUFACTURER : ESAB, ADDITIONAL DETAILS : AC/DC,20 KG/CAN USE IN 77202, INTERNAL REMARKS : MEC NO: 607105010 HS NO: 000000000


Input: I have material name like this  ===  MOUNTING RAIL TYPE : - P/N. : 374 04 MODEL : - MATERIAL : ROLLED STEEL WIDTH : 35MM DEPTH : 7.5MM LENGTH : 2000MM STANDART : DIN 46277-3 APPLICATION : TAPES AND INSULATING MATERIAL BRAND : LEGRAND  ===  Please inform me parameter below:  TYPE  DIMENSION  MATERIAL  COATING/FINISH  HOLE/SLOT SIZE  CENTER SPACING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: RAIL, MOUNTING, TYPE : -, DIMENSION : WD: 35 X DP: 7-1/2 X LG: 2000 MM, MATERIAL : ROLLED STEEL, COATING/FINISH : -, HOLE/SLOT SIZE : -, CENTER SPACING : -, PART NUMBER : 374 04, MANUFACTURER : LEGRAND, ADDITIONAL DETAILS : STANDART: DIN 46277-3 APPLICATION: TAPES AND INSULATING MATERIAL, INTERNAL REMARKS : -


Input: I have material name like this  ===  PADDLE/ SKILLET/ SPADE, BLANK, SIZE: 3 IN, MATL: CARBON STEEL, CLASS 150, OD: 133 MM, CENTER TO END: 170 MM, THICKNESS: 6.4 MM, HANDLE WIDTH: 32 MM  ===  Please inform me parameter below:  TYPE  SIZE  MATERIAL  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PADDLE, BLANK, TYPE : -, SIZE : 3 IN, MATERIAL : CARBON STEEL, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : SKILLET/ SPADE,BLIND,CLASS 150,OD: 133 MM,CENTER TO END: 170 MM,THICKNESS: 6.4 MM,HANDLE WIDTH: 32 MM, INTERNAL REMARKS : -


Input: I have material name like this  ===  INNERWRAP, 4" W X 40 M LG, 25MILS THK. COLOR : "BLACK",POLYETHYLENE BACKING BUTYL RUBBER, SYNTHETIC RESIN RUBBER, SYNTHETIC RESIN  ===  Please inform me parameter below:  TYPE  MATERIAL  SIZE  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TAPE, PACKING, TYPE : -, MATERIAL : POLYETHYLENE BACKING BUTYL RUBBER,SYNTHETIC RESIN RUBBER, SIZE : WD: 4 IN X LG: 60 M X THK: 25 MILS, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : INNERWRAP,4 IN W X 40 M LG,25MILS THK. COLOR: INBLACK,SYNTHETIC RESIN, INTERNAL REMARKS : -


Input: I have material name like this  ===  SAFETY GLASS, UVEX SUPER G, P/N : 9172-019 / 9172-086, FRAME COLOUR : BLACK, LENS COLOUR : GREY, COATING : HARD COAT HC 3000  ===  Please inform me parameter below:  TYPE  LENS MATERIAL  FRAME MATERIAL  COATING/FINISH  LENS COLOR  FRAME COLOR  TEMPLE  SAFETY STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GLASS, SAFETY, TYPE : -, LENS MATERIAL : -, FRAME MATERIAL : -, COATING/FINISH : -, LENS COLOR : GREY, FRAME COLOR : BLACK, TEMPLE : -, SAFETY STANDARD : -, PART NUMBER : 9172-019/9172-086, MANUFACTURER : AEROSAFETY, ADDITIONAL DETAILS : SAFETY GLASS,SUPER G,LENS COLOUR:,COATING: HARD COAT HC 3000, INTERNAL REMARKS : -


Input: I have material name like this  ===  1-1/2" -1500#,ANSIBOLTED BONNET TYPEBODY&BONNET: A216-WCB/A105N, STEM:A216-F6/A105+HF STEM:A216-F6/A105+HF  ===  Please inform me parameter below:  WEDGE TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  BODY MATERIAL  BODY MATERIAL STANDARD  CONSTRUCTION TYPE  CONFIGURATION  BONNET TYPE  STEM DESIGN  PORT TYPE  OPERATED TYPE  TRIM MATERIAL  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  BONNET BOLTING MATERIAL  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, GATE, WEDGE TYPE : -, NOMINAL SIZE : 1-1/2 IN, END CONNECTION : -, SCHEDULE NUMBER : -, PRESSURE RATING : CLASS 1500, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, BODY MATERIAL : CARBON STEEL, BODY MATERIAL STANDARD : ASTM A216 GRADE WCB/ ASTM A105N, CONSTRUCTION TYPE : -, CONFIGURATION : -, BONNET TYPE : BOLTED, STEM DESIGN : -, PORT TYPE : -, OPERATED TYPE : -, TRIM MATERIAL : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, BONNET BOLTING MATERIAL : -, MODEL NUMBER : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : ANSI TYPEBODY AND BONNET,STEM:A216-F6/A105 HF STEM:A216-F6/A105 HF, INTERNAL REMARKS : -


Input: I have material name like this  ===  TEE, TUBE REDUCING, SIZE 3 X 3/4 IN, CONN SOCKET, RATING SCH 80, MATL CPVC, P/N: 801-334C, MFG: SPEARS  ===  Please inform me parameter below:  TYPE  NOMINAL RUN SIZE  NOMINAL BRANCH SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TEE, PIPE, TYPE : REDUCING, NOMINAL RUN SIZE : 3 IN, NOMINAL BRANCH SIZE : 3/4 IN, END CONNECTION : SOCKET WELD, SCHEDULE NUMBER : SCH-80, PRESSURE RATING : -, WALL THICKNESS : -, MATERIAL : CHLORINATED POLYVINYL CHLORIDE, MATERIAL STANDARD : -, COATING/FINISH : -, DIMENSIONAL STANDARD : -, PART NUMBER : 801-334C, MANUFACTURER : SPEARS, ADDITIONAL DETAILS : TUBE, INTERNAL REMARKS : -


Input: I have material name like this  ===  BLIND, PIPE; TYPE : SPECTACLE BLIND FLANGE ; SIZE : 1/2" ; RATING : 300 ; SPECIFICATION : A516, ASTM 16.48 ; GRADE : 70 ; ADDITIONAL INFO 1 : RF  ===  Please inform me parameter below:  TYPE  DESIGN STANDARD  MATERIAL  MATERIAL STANDARD  COATING/FINISH  FLANGE FACING  END CONNECTION  PRESSURE RATING  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BLIND, PIPE, TYPE : SPECTACLE, DESIGN STANDARD : -, MATERIAL : -, MATERIAL STANDARD : ASTM A516 GRADE 70, COATING/FINISH : -, FLANGE FACING : RAISED FACE, END CONNECTION : -, PRESSURE RATING : CLASS 300, SIZE : 1/2 IN, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : FLANGED, INTERNAL REMARKS : -


Input: I have material name like this  ===  CONNECTOR: TEE, ALUM TUBE TO TUBE, 2IPS MAIN-1.5 TAP CONNECTOR: TEE, ALUMINUM TUBE TO TUBE, 2 IPS MAIN TO 1-1/2 IPS TAP, ANDERSON CAT. #ATTH-2014 MEC NO: 241497200 HS NO: 853690300  ===  Please inform me parameter below:  TYPE  NOMINAL RUN SIZE  NOMINAL BRANCH SIZE  RUN CONNECTION  BRANCH CONNECTION  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TEE, TUBE, TYPE : CONNECTOR, NOMINAL RUN SIZE : 2 IPS MAIN X 1-1/2 IPS, NOMINAL BRANCH SIZE : -, RUN CONNECTION : TUBE X TUBE, BRANCH CONNECTION : -, PRESSURE RATING : -, MATERIAL : ALUMINIUM, MATERIAL STANDARD : -, COATING/FINISH : -, LENGTH : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : TAP,ANDERSON CAT. ATTH-2014, INTERNAL REMARKS : MEC NO: 241497200 HS NO: 853690300


Input: I have material name like this  ===  REDUCER, CONCENTRIC, BUTT WELDING, CARBON STEEL, ASTM A234 GRADE WPB, SCHEDULE 80 X SCHSCHEDULE 160, NACE MR-0175, SIZE 2 INCH X 3/4  INCH  ===  Please inform me parameter below:  TYPE  SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REDUCER, PIPE, TYPE : CONCENTRIC, SIZE : 2 X 3/4 IN, END CONNECTION : BUTT WELD, SCHEDULE NUMBER : SCH-80 X SCH-160, PRESSURE RATING : -, WALL THICKNESS : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A234 GRADE WPB, COATING/FINISH : -, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : NACE MR-0175, INTERNAL REMARKS : -


Input: I have material name like this  ===  SYSTIMAX OPTICAL SPEED OPTICAL FIBER MULTIMODE 24 CORES 62,5 MICRON OUTDOOR CABLE-DIRECT BURIAL,CABLE  ===  Please inform me parameter below:  TYPE  INTERFACE TYPE  CONDUCTOR SIZE  CONDUCTOR MATERIAL  INSULATION MATERIAL  NUMBER OF CONDUCTOR  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CABLE, COMMUNICATION, TYPE : SYSTIMAX OPTICAL SPEED, INTERFACE TYPE : -, CONDUCTOR SIZE : -, CONDUCTOR MATERIAL : FIBER OPTICAL, INSULATION MATERIAL : -, NUMBER OF CONDUCTOR : -, PART NUMBER : 5021 024A MXBK, MANUFACTURER : -, ADDITIONAL DETAILS : MULTIMODE 24 CORES 62,5 MICRON OUTDOOR CABLE-DIRECT BURIAL, INTERNAL REMARKS : -


Input: I have material name like this  ===  TRANSMITTER, PRESSURE; PART NUMBER: EJA530E-FBH7N-03DDL/SF2/A/D3/T06/M15/HE/HC/N4; MANUFACTURER: YOKOGAWA ITALIA SRL  ===  Please inform me parameter below:  PRESSURE RANGE  OUTPUT RATING  POWER SUPPLY  CONNECTION TYPE  MOUNTING TYPE  ACCURACY  MATERIAL  TEMPERATURE RATING  ENCLOSURE TYPE  ENCLOSURE RATING  SIZE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TRANSMITTER, PRESSURE, PRESSURE RANGE : -, OUTPUT RATING : -, POWER SUPPLY : -, CONNECTION TYPE : -, MOUNTING TYPE : -, ACCURACY : -, MATERIAL : -, TEMPERATURE RATING : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, SIZE : -, MODEL NUMBER : -, PART NUMBER : EJA530E-FBH7N-03DDL/SF2/A/D3/T06/M15/HE/HC/N4, MANUFACTURER : YOKOGAWA, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  BEARING, ROLLER, TAPERED INSIDE DIA : 3.3465 IN; 85.00 MM; OUTSIDE DIA : 5.9055 IN; 150.00 MM; WIDTH : 1.2205 IN; 31.00 MM; TAPERED CONE AND CUP;  ===  Please inform me parameter below:  TYPE  INSIDE DIAMETER  OUTSIDE DIAMETER  WIDTH  INTERNAL CLEARANCE  NUMBER OF SHIELD  NUMBER OF SEAL  CAGE MATERIAL  BEARING SERIES  BORE TYPE  NUMBER OF ROW  DESIGNATION  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BEARING, ROLLER, TYPE : CONE AND CUP,TAPERED, INSIDE DIAMETER : 3.3465 IN,85 MM, OUTSIDE DIAMETER : 5.9055 IN (150 MM), WIDTH : 1.2205 IN (31 MM), INTERNAL CLEARANCE : -, NUMBER OF SHIELD : -, NUMBER OF SEAL : -, CAGE MATERIAL : -, BEARING SERIES : -, BORE TYPE : -, NUMBER OF ROW : -, DESIGNATION : -, PART NUMBER : -, MANUFACTURER : SKF, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  CONTACTOR COIL,, TYPE,,: LX4D,, P/N,,: LX4D6ED>>> LX4D7ED,, MODEL,,: TESYS D,, COIL RATED VOLTAGE,,: 48VDC,, COMPATIBLE WITH,,: LP1D23,D32,, BRAND,,: SCHNEIDER,,  ===  Please inform me parameter below:  TYPE  NUMBER OF POLES  CONTACT CONFIGURATION  NUMBER OF PHASE  POWER RATING  VOLTAGE RATING  COIL VOLTAGE  CURRENT RATING  FREQUENCY  ENCLOSURE  MOUNTING TYPE  TERMINAL TYPE  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CONTACTOR, ELECTROMAGNETIC, TYPE : -, NUMBER OF POLES : -, CONTACT CONFIGURATION : -, NUMBER OF PHASE : -, POWER RATING : -, VOLTAGE RATING : 48 VDC, COIL VOLTAGE : -, CURRENT RATING : -, FREQUENCY : -, ENCLOSURE : -, MOUNTING TYPE : -, TERMINAL TYPE : -, SIZE : -, PART NUMBER : LX4-D6ED, MANUFACTURER : SCHNEIDER, ADDITIONAL DETAILS : MODEL,TESYS D,COMPATIBLE WITH,LP1D23,D32, INTERNAL REMARKS : -


Input: I have material name like this  ===  TRANSMITTER, DIFFERENTIAL PRESSURE, MODEL : EJA110E-FFS5G-91CDJ/KS26/D1/X2/A/M01/T12/HC, 5-VALVE MANIFOLD, BODY MATERIAL: 316SS, CO, CONNECTION SIZE: 1/2" NPT (F) YOKOGAWA  ===  Please inform me parameter below:  TYPE  PROCESS CONNECTION  ELECTRICAL CONNECTION  POWER SUPPLY  OUTPUT SIGNAL  COMMUNICATION PROTOCOL  ELECTRONIC HOUSING MATERIAL  BODY MATERIAL  ISOLATING DIAPHRAGM MATERIAL  FLANGE MATERIAL  BOLT AND NUT MATERIAL STANDARD  SENSOR FILL FLUID MATERIAL  SERVICE  INSPECTION CERTIFICATE  HAZARDOUS AREA CLASSIFICATION  MOUNTING TYPE  METER OPTION  PRESSURE RATING  RANGE LIMIT  CALIBRATED DIFF.PRESSURE RANGE  SPAN LIMIT  ACCURACY  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TRANSMITTER, DIFFERENTIAL PRESSURE, TYPE : -, PROCESS CONNECTION : -, ELECTRICAL CONNECTION : -, POWER SUPPLY : -, OUTPUT SIGNAL : -, COMMUNICATION PROTOCOL : -, ELECTRONIC HOUSING MATERIAL : -, BODY MATERIAL : STAINLESS STEEL-316, ISOLATING DIAPHRAGM MATERIAL : -, FLANGE MATERIAL : -, BOLT AND NUT MATERIAL STANDARD : -, SENSOR FILL FLUID MATERIAL : -, SERVICE : -, INSPECTION CERTIFICATE : -, HAZARDOUS AREA CLASSIFICATION : -, MOUNTING TYPE : -, METER OPTION : -, PRESSURE RATING : -, RANGE LIMIT : -, CALIBRATED DIFF.PRESSURE RANGE : -, SPAN LIMIT : -, ACCURACY : -, MODEL NUMBER : EJA110E-FFS5G-91CDJ/KS26/D1/X2/A/M01/T12/HC, PART NUMBER : -, MANUFACTURER : YOKOGAWA, ADDITIONAL DETAILS : 5-VALVE MANIFOLD,CONNECTION SIZE: 1/2 IN NPT (F), INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE, NEEDLE, ANGLE, MFL, SCREWE END, 1/2" SIZE, 10.000# WP, NEEDLEVALVE SCREWED # 10.000 CARBON STEEL;RATING : ASTM 1-105  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  MATERIAL  CONSTRUCTION TYPE  CONFIGURATION  PORT TYPE  OPERATED TYPE  TRIM MATERIAL  STEM MATERIAL  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, NEEDLE, TYPE : ANGLE, NOMINAL SIZE : 1/2 IN, END CONNECTION : SCREWED, SCHEDULE NUMBER : -, PRESSURE RATING : CLASS 10000, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, MATERIAL : CARBON STEEL, CONSTRUCTION TYPE : -, CONFIGURATION : -, PORT TYPE : -, OPERATED TYPE : -, TRIM MATERIAL : -, STEM MATERIAL : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, MODEL NUMBER : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : MFL,RATING: ASTM 1-105, INTERNAL REMARKS : -


Input: I have material name like this  ===  NEEDLE VALVE ASSY, 1/2" NOM, 10K MAX WP, FF, MULTI-TURN, 1/2" M-NPTINLET X 1/2" F-NPT OUTLET, 316SS, NACE COMPLIANT, UNI-DIRECTIONAL ANGLE.P/N. P1000081049. MFCR: FMC.  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  BODY MATERIAL  BODY MATERIAL STANDARD  CONSTRUCTION TYPE  CONFIGURATION  PORT TYPE  OPERATED TYPE  DISC MATERIAL  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, CHECK, TYPE : UNI-DIRECTIONAL, NOMINAL SIZE : 1/2 X 1/2 IN, END CONNECTION : MALE X FEMALE NPT, SCHEDULE NUMBER : -, PRESSURE RATING : 10,000 PSI, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, BODY MATERIAL : STAINLESS STEEL-316, BODY MATERIAL STANDARD : -, CONSTRUCTION TYPE : -, CONFIGURATION : -, PORT TYPE : -, OPERATED TYPE : -, DISC MATERIAL : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, MODEL NUMBER : -, PART NUMBER : P1000081049, MANUFACTURER : FMC, ADDITIONAL DETAILS : ASSY,NACE COMPLIANT, INTERNAL REMARKS : -


Input: I have material name like this  ===  2" X 3/4", SCH-10S X SCH-80SSTAINLESS STEEL, BLE X PSEASTM A182-F304L DESIGN TO ANSI B16.11/MSS-SP97DESIGN TO ANSI B16.11/MSS-SP97  ===  Please inform me parameter below:  TYPE/STRUCTURE  SIZE  END CONNECTION  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, TUBE, TYPE/STRUCTURE : -, SIZE : 2 X 3/4 IN, END CONNECTION : BEVELED LARGE END X PLAIN SMALL END, PRESSURE RATING : -, MATERIAL : STAINLESS STEEL, MATERIAL STANDARD : ASTM A182 GARDE F304L, COATING/FINISH : -, LENGTH : -, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : SCH-10S X SCH-80S,DESIGN TO ANSI B16.11/MSS-SP97, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE:RELIEF 1/4" MNPT X 1/4" FNPTLOW PRESSURE SET @ 7 BARG MANUFACTURER: SWAGELOK MPN: SS-RL3M4-F4 TAG NO: 759-JP-01  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  MATERIAL  CONSTRUCTION TYPE  CONFIGURATION  OPERATED TYPE  TRIM MATERIAL  SET PRESSURE  OPERATING PRESSURE  TEMPERATURE RATING  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  SERVICE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, RELIEF, TYPE : LOW PRESSURE, NOMINAL SIZE : 1/4 X 1/4 IN, END CONNECTION : MNPT X FNPT, SCHEDULE NUMBER : -, PRESSURE RATING : -, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, MATERIAL : -, CONSTRUCTION TYPE : -, CONFIGURATION : -, OPERATED TYPE : -, TRIM MATERIAL : -, SET PRESSURE : 7 BARG, OPERATING PRESSURE : -, TEMPERATURE RATING : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, SERVICE : -, MODEL NUMBER : -, PART NUMBER : SS-RL3M4-F4, MANUFACTURER : SWAGELOK, ADDITIONAL DETAILS : -, INTERNAL REMARKS : TAG NO: 759-JP-01


Input: I have material name like this  ===  INDICATION LAMP, P/N: YW1P-2EQ0Y, AREVA P/N: H1114700002, LENS COLOR: YELLOW, STYLE: DOME VOLTAGE, ILLUMINATION TYPE: WITHOUT LAMP, OPERATING VOLTAGE: 250VAC/DC(MAX), BRAND: IDEC  ===  Please inform me parameter below:  TYPE  APPLICATION  BASE TYPE  COLOR  FREQUENCY  WATTAGE  CURRENT RATING  VOLTAGE RATING  DIMENSION  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: LAMP, INDICATING, TYPE : -, APPLICATION : -, BASE TYPE : -, COLOR : YELLOW, FREQUENCY : -, WATTAGE : -, CURRENT RATING : -, VOLTAGE RATING : MAX: 250 VAC/VDC, DIMENSION : -, PART NUMBER : YW1P-2EQ0Y, MANUFACTURER : IDEC, ADDITIONAL DETAILS : AREVA P/N: H1114700002,STYLE: DOME VOLTAGE,ILLUMINATION TYPE: WITHOUT LAMP, INTERNAL REMARKS : -


Input: I have material name like this  ===  FILTER: AIR, FGUARD AF409K, 1142150320, PA1681FN P104972 FILTER: AIR, FLEETGUARD AF409K, ISUZU 1142150320, BALDWIN PA1681-FNDONALDSON P104972 P18-1054 MEC NO: 897401409 HS NO: 842131000  ===  Please inform me parameter below:  TYPE  FILTER RATING  SIZE  PORT SIZE/CONNECTION  ELEMENT MATERIAL  PRESSURE RATING  FLOW RATING  HOUSING MATERIAL  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FILTER, AIR, TYPE : -, FILTER RATING : -, SIZE : -, PORT SIZE/CONNECTION : -, ELEMENT MATERIAL : -, PRESSURE RATING : -, FLOW RATING : -, HOUSING MATERIAL : -, TEMPERATURE RATING : -, PART NUMBER : AF409K, MANUFACTURER : FLEETGUARD, ADDITIONAL DETAILS : ISUZU 1142150320,BALDWIN PA1681-FN DONALDSON P104972 P18-1054, INTERNAL REMARKS : MEC NO: 897401409 HS NO: 842131000


Input: I have material name like this  ===  BELT, V, A SECTION, A 41 BAN, SYNTHETIC RUBBER, 1/2 IN WIDTH, 43 IN OUTSIDE LENGTH , A 41 BAN, RMA, ISO 1813 AND ISO 9563 STANDARD  ===  Please inform me parameter below:  TYPE  OUTSIDE DIAMETER  TOP WIDTH  MATERIAL  THICKNESS  NUMBER OF RIB  BELT NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BELT, V, TYPE : -, OUTSIDE DIAMETER : -, TOP WIDTH : 1/2 IN, MATERIAL : SYNTHETIC RUBBER, THICKNESS : -, NUMBER OF RIB : -, BELT NUMBER : A41, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : A SECTION,BAN,RMA,ISO 1813 AND ISO 9563 STANDARD,43 IN OUTSIDE LENGTH, INTERNAL REMARKS : -


Input: I have material name like this  ===  FITTING; TYPE : THREAD O-LET ; SIZE : 10" - 8 X 2" ; CONNECTION : FNPT ; RATING : 3000# ; GRADE : A105N  ===  Please inform me parameter below:  TYPE  SIZE  SCHEDULE NUMBER  CONNECTION TYPE  MATERIAL  MATERIAL STANDARD  COATING/FINISH  PRESSURE RATING  WALL THICKNESS  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: THREADOLET, TYPE : -, SIZE : 10 IN-8 X 2 IN, SCHEDULE NUMBER : -, CONNECTION TYPE : FNPT, MATERIAL : -, MATERIAL STANDARD : ASTM A105N, COATING/FINISH : -, PRESSURE RATING : CLASS 3000, WALL THICKNESS : -, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : FITTING,TYPE: THREAD O-LET,10 IN - 8 X 2 IN, INTERNAL REMARKS : -


Input: I have material name like this  ===  TRANSMITTER,DIFFERENTIAL PRESSURE, PART NUMBER: EJA110E-JHW5G-91CEJ/FF1/HE/X2, MANUFACTURER: YOKOGAWA, ADDITIONAL DETAILS: C/W 5 WAYS MANIFOLD,/A/D1/C3/N4/M01/T12/JH01 C/W C13ST-5WSA0-S4-NNVS2-NNNN  ===  Please inform me parameter below:  TYPE  PROCESS CONNECTION  ELECTRICAL CONNECTION  POWER SUPPLY  OUTPUT SIGNAL  COMMUNICATION PROTOCOL  ELECTRONIC HOUSING MATERIAL  BODY MATERIAL  ISOLATING DIAPHRAGM MATERIAL  FLANGE MATERIAL  BOLT AND NUT MATERIAL STANDARD  SENSOR FILL FLUID MATERIAL  SERVICE  INSPECTION CERTIFICATE  HAZARDOUS AREA CLASSIFICATION  MOUNTING TYPE  METER OPTION  PRESSURE RATING  RANGE LIMIT  CALIBRATED DIFF.PRESSURE RANGE  SPAN LIMIT  ACCURACY  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TRANSMITTER, DIFFERENTIAL PRESSURE, TYPE : -, PROCESS CONNECTION : -, ELECTRICAL CONNECTION : -, POWER SUPPLY : -, OUTPUT SIGNAL : -, COMMUNICATION PROTOCOL : -, ELECTRONIC HOUSING MATERIAL : -, BODY MATERIAL : -, ISOLATING DIAPHRAGM MATERIAL : -, FLANGE MATERIAL : -, BOLT AND NUT MATERIAL STANDARD : -, SENSOR FILL FLUID MATERIAL : -, SERVICE : -, INSPECTION CERTIFICATE : -, HAZARDOUS AREA CLASSIFICATION : -, MOUNTING TYPE : -, METER OPTION : -, PRESSURE RATING : -, RANGE LIMIT : -, CALIBRATED DIFF.PRESSURE RANGE : -, SPAN LIMIT : -, ACCURACY : -, MODEL NUMBER : -, PART NUMBER : EJA110E-JHW5G-91CEJ/FF1/HE/X2, MANUFACTURER : YOKOGAWA, ADDITIONAL DETAILS : C/W 5 WAYS MANIFOLD,/A/D1/C3/N4/M01/T12/JH01 C/W C13ST-5WSA0-S4-NNVS2-NNNN, INTERNAL REMARKS : -


Input: I have material name like this  ===  COPPER CRIM (CABLE CONNECTOR) ALL TYPE FOR CONDUCTOR COPPER LUG, SIZE:25 SQMM, BRAND: "UTILUX", P/N: CK 25 H1458ACCESSORIES FOR WIRES AND CABLES : A - D,CONNECTORS, CABLE.  ===  Please inform me parameter below:  TYPE  MATERIAL  SIZE  CABLE SIZE  ELECTRICAL RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CONNECTOR, CABLE END, TYPE : -, MATERIAL : COPPER, SIZE : -, CABLE SIZE : 25 MM2, ELECTRICAL RATING : -, PART NUMBER : CK 25 H1458, MANUFACTURER : UTILUX, ADDITIONAL DETAILS : CRIM,ALL TYPE FOR CONDUCTOR LUG,ACCESSORIES FOR WIRES AND CABLES: A - D,CONNECTORS,CABLE, INTERNAL REMARKS : -


Input: I have material name like this  ===  NIPPLE: PIPE, 1/4 MNPT X 3LG SWAGELOK SS-4-HLN-3.00 NIPLLE: PIPE, 1/4 MNPT X 3LG 8000 PSI, SWAGELOK SS-4-HLN-3.00, PARKER 4-4-MHLN-3-SS/ 4-4-MHLN-SS-3.0, CAJON SS4-HLN-3, HEXAGON;  ===  Please inform me parameter below:  TYPE/STRUCTURE  SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, PIPE, TYPE/STRUCTURE : HEXAGONAL, SIZE : 1/4 IN, END CONNECTION : MNPT, SCHEDULE NUMBER : -, PRESSURE RATING : 8000 PSI, WALL THICKNESS : -, MATERIAL : STAINLESS STEEL-316, MATERIAL STANDARD : -, COATING/FINISH : -, LENGTH : 3 IN, DIMENSIONAL STANDARD : -, PART NUMBER : SS-4-HLN-3.00, MANUFACTURER : SWAGELOK, ADDITIONAL DETAILS : PARKER 4-4-MHLN-3-SS/ 4-4-MHLN-SS-3.0,CAJON SS4-HLN-3, INTERNAL REMARKS : -


Input: I have material name like this  ===  BASE MCCB,, ,, TYPE,,: PLUG IN BASE FC/RC,, P/N,,: 43811,, MODEL,,: C250N/H/L,, POLES,,: 4P,, ,, ,, BRAND,,: SCHNEIDER,,  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  FRAME RATING  INTERRUPT RATING  NUMBER OF POLE  SIZE  INSTANTANEOUS TRIP SETTING RNG  TERMINAL TYPE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BREAKER, CIRCUIT, TYPE : MCCB, CURRENT RATING : -, VOLTAGE RATING : -, FRAME RATING : -, INTERRUPT RATING : -, NUMBER OF POLE : 4, SIZE : -, INSTANTANEOUS TRIP SETTING RNG : -, TERMINAL TYPE : -, MOUNTING TYPE : -, PART NUMBER : 43811, MANUFACTURER : SCHNEIDER, ADDITIONAL DETAILS : TYPE: PLUG IN BASE FC/RC,MODEL: C250N/H/L, INTERNAL REMARKS : -


Input: I have material name like this  ===  CARTRIDGE; MANUFACTURER NAME : HONEYWELL ANALYTICS ; ADDITIONAL INFO 1 : 4 GAS, OXYGEN, METHANE %LEL IR, CO, H2S ; ORDER NO : 2302BCS4ORCHO  ===  Please inform me parameter below:  TYPE  GAS TYPE  VOLUME  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CARTRIDGE, GAS, TYPE : -, GAS TYPE : OXYGEN,METHANE %LEL IR,CO,H2S, VOLUME : -, TEMPERATURE RATING : -, PART NUMBER : 2302BCS4ORCHO, MANUFACTURER : HONEYWELL, ADDITIONAL DETAILS : 1: 4 GAS, INTERNAL REMARKS : -


Input: I have material name like this  ===  ACTUATOR, ELECTRIC MOTOR, TYPE: REDMAX-5.10-BF, TORQUE: 5/10NM, SUPPLY: 24 - 240 VAC/DC, SPRING RETURN: 3 OR 10 S/90 DEGREE, CONTROL MODE: ON-OFF, 3 POS., MFR: SCHISCHEK  ===  Please inform me parameter below:  TYPE  ENCLOSURE  CYCLE TIME  SPEED RATING  STROKE  CURRENT RATING  VOLTAGE RATING  POWER RATING  TORQUE RATING  DIMENSION  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ACTUATOR, ELECTRICAL, TYPE : ELECTRIC MOTOR, ENCLOSURE : -, CYCLE TIME : -, SPEED RATING : -, STROKE : -, CURRENT RATING : -, VOLTAGE RATING : 24 TO 240 VAC/VDC, POWER RATING : -, TORQUE RATING : 5/10 NM, DIMENSION : -, MANUFACTURER : SCHISCHEK, PART NUMBER : REDMAX-5.10-BF, ADDITIONAL DETAILS : SPRING RETURN: 3 OR 10 S/90 DEGREE,CONTROL MODE: ON-OFF,3 POS, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE, SOLENOID, MAXSEAL, Y123BA1H1BS,VALVE, SOLENOID, MAXSEAL, Y123BA1H1BS, 24 VDC, 0 TO 20 BAR, " 1/4 IN THREAD  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  MATERIAL  MOUNTING TYPE  ELECTRICAL RATING  ENCLOSURE TYPE  ENCLOSURE RATING  TEMPERATURE RATING  COIL RATING  OPERATION  ORIFICE SIZE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, SOLENOID, TYPE : -, NOMINAL SIZE : 1/4 IN, END CONNECTION : THREADED, PRESSURE RATING : 0 TO 20 BAR, MATERIAL : -, MOUNTING TYPE : -, ELECTRICAL RATING : 24 VDC, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, TEMPERATURE RATING : -, COIL RATING : -, OPERATION : -, ORIFICE SIZE : -, MODEL NUMBER : -, PART NUMBER : Y123BA1H1BS, MANUFACTURER : MAXSEAL, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  ANSULITE: 3X3 LOW VISCOSITY, ALCOHOL RESISTANT,ANSUL 416495 ANSULITE: 3X3 LOW VISCOSITY, ALCOHOL RESISTANT CONCENTRATE, 55 GALLONS, ANSUL 416495  ===  Please inform me parameter below:  CHEMICAL NAME  FORM  PACKAGING  COMPOSITION  COLOR  MSDS NUMBER  GRADE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CHEMICAL, CHEMICAL NAME : ALCOHOL RESISTANT CONCENTRATE, FORM : -, PACKAGING : 55 GAL, COMPOSITION : -, COLOR : -, MSDS NUMBER : -, GRADE : -, PART NUMBER : 416495, MANUFACTURER : ANSUL, ADDITIONAL DETAILS : ANSULITE: 3X3 LOW VISCOSITY, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT, STUD, 2" 1500# 8 X 7/8" UNC X 461MM LONG, 2 X HEX NUTS, 2 X FLAT WASHERS, A193 GR B8M A194 GR8M, NACE FOR SNO-PK-7101 & 7201201 HYDROCYCLONE, MFR KGD PROCESS INT.  ===  Please inform me parameter below:  DESIGN STANDARD  STUD BOLT MATERIAL  STUD BOLT MATERIAL STANDARD  NUT TYPE  NUT MATERIAL STANDARD  COATING/FINISH  NUMBER OF NUT(S) PER STUD BOLT  THREAD CLASS SYMBOL(BOLT/NUT)  THREAD TYPE  THREAD COARSE PITCH  THREAD LENGTH  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD BOLT, WITH NUT, DESIGN STANDARD : -, STUD BOLT MATERIAL : -, STUD BOLT MATERIAL STANDARD : ASTM A193 GRADE B8M,ASTM A194 GRADE 8M, NUT TYPE : -, NUT MATERIAL STANDARD : -, COATING/FINISH : -, NUMBER OF NUT(S) PER STUD BOLT : -, THREAD CLASS SYMBOL(BOLT/NUT) : -, THREAD TYPE : -, THREAD COARSE PITCH : -, THREAD LENGTH : -, SIZE : 2 X 7/8 IN, LENGTH : 461 MM, PART NUMBER : -, MANUFACTURER : KGD PROCESS, ADDITIONAL DETAILS : 1500 8 X UNC 2 X HEX NUTS,2 X FLAT WASHERS,NACE FOR SNO-PK-7101 AND 7201201 HYDROCYCLONE, INTERNAL REMARKS : -


Input: I have material name like this  ===  FLANGE, PIPETYPE : WELDING NECKMATERIAL : CARBON STEELSPECIFICATION : ASTM A 105FACE : RAISEDRATING : CLASS 150PIPE SCHEDULE : 80PIPE SIZE : 3IN  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  FLANGE FACING  DIMENSIONAL STANDARD  THICKNESS  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FLANGE, PIPE, TYPE : WELDING NECK, NOMINAL SIZE : 3 IN, PRESSURE RATING : CLASS 150, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A105, COATING/FINISH : -, FLANGE FACING : RAISED FACE, DIMENSIONAL STANDARD : -, THICKNESS : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  RECEPTACLE, ELECTRIC, CLIPSAL IND INDIA PVT LTD, 31VHWE, W/ SINGLE RJ-45, RANGE 100 MBPS, CORE 8 , MODEL WALL MOUNTED  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  NEMA/IEC SIZE  MATERIAL  NUMBER OF POLES  NUMBER OF WIRES  NUMBER OF PHASE  MOUNTING TYPE  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: RECEPTACLE, ELECTRICAL, TYPE : -, VOLTAGE RATING : -, CURRENT RATING : -, NEMA/IEC SIZE : -, MATERIAL : -, NUMBER OF POLES : -, NUMBER OF WIRES : -, NUMBER OF PHASE : -, MOUNTING TYPE : WALL, SIZE : -, PART NUMBER : 31VHWE, MANUFACTURER : CLIPSAL, ADDITIONAL DETAILS : W/SINGLE RJ-45,RANGE 100 MBPS,CORE 8,MODEL MOUNTED, INTERNAL REMARKS : -


Input: I have material name like this  ===  5/8" DIA. X 4" LG, C/W. TWOHEX HEAD NUTS, FLUOROCARBONCOATED AMICOTE, BOLTS TO ASTM A-193, GRADE B7, NUTS TO ASTM A-193, GRADE B7, NUTS TO ASTM  ===  Please inform me parameter below:  DESIGN STANDARD  STUD BOLT MATERIAL  STUD BOLT MATERIAL STANDARD  NUT TYPE  NUT MATERIAL STANDARD  COATING/FINISH  NUMBER OF NUT(S) PER STUD BOLT  THREAD CLASS SYMBOL(BOLT/NUT)  THREAD TYPE  THREAD COARSE PITCH  THREAD LENGTH  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD BOLT, WITH NUT, DESIGN STANDARD : -, STUD BOLT MATERIAL : -, STUD BOLT MATERIAL STANDARD : BOLT: ASTM A193 GRADE B7, NUT TYPE : -, NUT MATERIAL STANDARD : -, COATING/FINISH : FLUOROCARBON COATED AMICOTE, NUMBER OF NUT(S) PER STUD BOLT : -, THREAD CLASS SYMBOL(BOLT/NUT) : -, THREAD TYPE : -, THREAD COARSE PITCH : -, THREAD LENGTH : -, SIZE : 5/8 IN, LENGTH : 4 IN, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : C/W. TWOHEX HEAD NUTS,FLUORO, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET,SHEET, SIZE: 60 X 120 IN, THICKNESS: 1/32 IN, MATERIAL: NON ASBESTOS,JI C6000, MANUFACTURER: 3 STAR, INTERNAL REMARKS: MEC NO: 103493252 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  SIZE  THICKNESS  MATERIAL  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GASKET, SHEET, TYPE : -, SIZE : 60 X 120 IN, THICKNESS : 1/32 IN, MATERIAL : NON ASBESTOS,JI C6000, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : 3 STAR, ADDITIONAL DETAILS : -, INTERNAL REMARKS : MEC NO: 103493252 HS NO: 000000000


Input: I have material name like this  ===  === CIRCUIT BREAKER === MCB; 2 POLE; 10A; 230/400VAC; 50/60HZ; 20KA; THERMAL MAGNETIC; MANUAL RESET; CLIP-ON DIN RAIL MOUNTING; 85 H X 36 W X 78.5MM D  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  FRAME RATING  INTERRUPT RATING  NUMBER OF POLE  SIZE  INSTANTANEOUS TRIP SETTING RNG  TERMINAL TYPE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BREAKER, CIRCUIT, TYPE : MCB, CURRENT RATING : 10 A, VOLTAGE RATING : 230/400 VAC, FRAME RATING : -, INTERRUPT RATING : 20 KA, NUMBER OF POLE : 2, SIZE : WD: 36 X DP: 78.50 X HT: 85 MM, INSTANTANEOUS TRIP SETTING RNG : -, TERMINAL TYPE : CLIP ON, MOUNTING TYPE : DIN RAIL, PART NUMBER : A9F44210, MANUFACTURER : SCHNEIDER, ADDITIONAL DETAILS : 50/60 HZ,THERMAL MAGNETIC,MANUAL RESET, INTERNAL REMARKS : -


Input: I have material name like this  ===  CP21-315 REV.10/95 LIST OF APPROVAL FOR COMPANY ONLY CP21-315 REV.10/95 LIST OF APPROVAL FOR COMPANY ONLY MEC NO: 315221315 HS NO: 000000000  ===  Please inform me parameter below:  ITEM NAME  COLOR  FORM OF SUPPLY  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REQUISITES, OFFICE, ITEM NAME : LIST OF APPROVAL FOR COMPANY, COLOR : -, FORM OF SUPPLY : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : ONLY CP21-315 REV.10/95 ONLY, INTERNAL REMARKS : MEC NO: 315221315 HS NO: 000000000


Input: I have material name like this  ===  MODEL: GD-24APPLICATION: COLD & HOT WATERINLET PRESS.: 0.2 - 1.6 MPA REDUCED PRESS.:0.05 - 0.55 MPAREDUCED PRESS.:0.05 - 0.55 MPA  ===  Please inform me parameter below:  TYPE  PORT SIZE/CONNECTION  MEASURING RANGE  SIZE  FLOW RATING  PRESSURE RATING  TEMPERATURE RATING  MEDIA  BODY MATERIAL  OPERATOR TYPE  DISPLAY TYPE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REGULATOR, PRESSURE, TYPE : -, PORT SIZE/CONNECTION : -, MEASURING RANGE : -, SIZE : -, FLOW RATING : -, PRESSURE RATING : -, TEMPERATURE RATING : -, MEDIA : -, BODY MATERIAL : -, OPERATOR TYPE : -, DISPLAY TYPE : -, MODEL NUMBER : -, PART NUMBER : GD-24, MANUFACTURER : -, ADDITIONAL DETAILS : MODEL: APPLICATION: COLD AND HOT WATERINLET PRESS.: 0.2 - 1.6 MPA REDUCED PRESS.: 0.05 - 0.55 MPAREDUCED PRESS.: 0.05 - 0.55 MPA, INTERNAL REMARKS : -


Input: I have material name like this  ===  FERRULE; TYPE : FERRULE ; SIZE : 4.0 MM2 ; COLOUR : ORANGE ; PART NUMBER : 458-730 ; MANUFACTURER NAME : RS  ===  Please inform me parameter below:  TYPE  DESIGN  MATERIAL  COLOR  TEMPERATURE RATING  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: MARKER, CABLE, TYPE : -, DESIGN : -, MATERIAL : -, COLOR : ORANGE, TEMPERATURE RATING : -, SIZE : -, PART NUMBER : 458-730, MANUFACTURER : RS COMPONENTS, ADDITIONAL DETAILS : TYPE: FERRULE: SIZE: 4.0 MM2, INTERNAL REMARKS : -


Input: I have material name like this  ===  SWITCH,PUSHBTN:START,GRE,DIA1/2" ON CCF - IPPUSHBUTTON: START,GREEN,DIA1/2" ON CCF-IP 65,COMES WITH 2NO SWITCH MODULE MNP: EP 0 MANUFACTURER: BARTEC 3801/3803 TAG# 654-JP-02A / 02B UNSPSC: 39121550  ===  Please inform me parameter below:  TYPE  MATERIAL  COLOR  MOUNTING TYPE  PROTECTION  ELECTRICAL RATING  CONTACT CONFIGURATION  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SWITCH, PUSHBUTTON, TYPE : -, MATERIAL : -, COLOR : GREEN, MOUNTING TYPE : -, PROTECTION : IP65, ELECTRICAL RATING : -, CONTACT CONFIGURATION : 2 N/O, PART NUMBER : EP 0, MANUFACTURER : BARTEC, ADDITIONAL DETAILS : START,DIA1/2 IN ON CCF,SWITCH MODULE 3801/3803 TAG 654-JP-02A/02B UNSPSC: 39121550, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE,RLF:SFTY,1-1/2IN INLET,CLASS 1500; MANUFACTURER: FUKUI SEISAKUSHO; P/N: 1.1/2-D-2-REC601-S15(A)  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  MATERIAL  CONSTRUCTION TYPE  CONFIGURATION  OPERATED TYPE  TRIM MATERIAL  SET PRESSURE  OPERATING PRESSURE  TEMPERATURE RATING  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  SERVICE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, RELIEF, TYPE : SAFETY, NOMINAL SIZE : INLET: 1-1/2 IN, END CONNECTION : -, SCHEDULE NUMBER : -, PRESSURE RATING : CLASS 1500, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, MATERIAL : -, CONSTRUCTION TYPE : -, CONFIGURATION : -, OPERATED TYPE : -, TRIM MATERIAL : -, SET PRESSURE : -, OPERATING PRESSURE : -, TEMPERATURE RATING : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, SERVICE : -, MODEL NUMBER : -, PART NUMBER : 1.1/2-D-2-REC601-S15(A), MANUFACTURER : FUKUI SEISAKUSHO, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE, CARBON STEEL, API 5L, GR X65, 10 3/4 IN, OD 0.438 IN WALL 0.735 IN FUSION BONDED EPOXY COATING <(>&<)> 35 MM CONCRETE COATING  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  LENGTH  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  TEMPERATURE RATING  DESIGN STANDARD  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, METALLIC, TYPE : -, NOMINAL SIZE : 10-3/4 IN, LENGTH : -, END CONNECTION : -, SCHEDULE NUMBER : -, PRESSURE RATING : -, WALL THICKNESS : 0.438 IN, MATERIAL : CARBON STEEL, MATERIAL STANDARD : API GRADE X65, COATING/FINISH : -, MANUFACTURING PROCESS : -, TEMPERATURE RATING : -, DESIGN STANDARD : API SPEC 5L, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : 0.735 IN FUSION BONDED EPOXY COATING AND 35 MM CONCRETE COATING, INTERNAL REMARKS : -


Input: I have material name like this  ===  CAP ASSEMBLY,X-MAS TREE, WORKING PRESSURE RATING: 5K, BORE SIZE: 4-1/2 IN, MANUFACTURER: FMC, ADDITIONAL DETAILS: GAS WELL SINGLE CHRISTMAS TREE CAP,X-TREE ADAPTER  ===  Please inform me parameter below:  DESIGN STANDARD  COMPLETION TYPE  BODY MATERIAL  MATERIAL STANDARD  PRODUCT SPECIFICATION LEVEL(PSL)  PERFORMANCE RATING  CONNECTION STYLE(TOP)  CONNECTION STYLE(BOTTOM)  THREAD,PICK-UP  WORKING PRESSURE RATING  PRESSURE CLASS/RATING(TOP CONNECTION)  PRESSURE CLASS/RATING(BOTTOM CONNECTION)  CENTER TO CENTER SPACING  BORE SIZE  TEMPERATURE CLASS/RATING  SERVICE  UNION NUT TYPE  MATERIAL,UNION NUT  MATERIAL,BLANKING PLUG  THREAD,BLANKING PLUG  RING IDENTIFICATION NUMBER_TOP  RING IDENTIFICATION NUMBER_BOTTOM  CONNECTION SIZE(TOP)  CONNECTION SIZE(BOTTOM)  OVERALL HEIGHT  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CAP ASSEMBLY, X-MAS TREE, DESIGN STANDARD : -, COMPLETION TYPE : -, BODY MATERIAL : -, MATERIAL STANDARD : -, PRODUCT SPECIFICATION LEVEL(PSL) : -, PERFORMANCE RATING : -, CONNECTION STYLE(TOP) : -, CONNECTION STYLE(BOTTOM) : -, THREAD,PICK-UP : -, WORKING PRESSURE RATING : 5K, PRESSURE CLASS/RATING(TOP CONNECTION) : -, PRESSURE CLASS/RATING(BOTTOM CONNECTION) : -, CENTER TO CENTER SPACING : -, BORE SIZE : 4-1/2 IN, TEMPERATURE CLASS/RATING : -, SERVICE : -, UNION NUT TYPE : -, MATERIAL,UNION NUT : -, MATERIAL,BLANKING PLUG : -, THREAD,BLANKING PLUG : -, RING IDENTIFICATION NUMBER_TOP : -, RING IDENTIFICATION NUMBER_BOTTOM : -, CONNECTION SIZE(TOP) : -, CONNECTION SIZE(BOTTOM) : -, OVERALL HEIGHT : -, PART NUMBER : -, MANUFACTURER : FMC, ADDITIONAL DETAILS : GAS WELL SINGLE CHRISTMAS TREE CAP,X-TREE ADAPTER, INTERNAL REMARKS : -


Input: I have material name like this  ===  NUT, HEX; TYPE : HEAVY ; DIAMETER : 1-1/4" ; THREADS : 8 UNC ; SIZE : 1-1/4" ; MATERIAL : FLUOROCARBON COATED ; SPECIFICATION : ASTM A194 ; GRADE : 2H  ===  Please inform me parameter below:  TYPE  SIZE  THREAD TYPE  MATERIAL  MATERIAL STANDARD  COATING/FINISH  DESIGN STANDARD  CHAMFERING  THREAD COARSE PITCH  DIMENSIONAL TOLERANCE  NUT THREAD TOLERANCE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NUT, HEXAGONAL HEAD, TYPE : HEAVY, SIZE : 1-1/4 IN, THREAD TYPE : 8 UNC, MATERIAL : MEDIUM CARBON STEEL, MATERIAL STANDARD : ASTM A194 GRADE 2H, COATING/FINISH : FLUOROCARBON COATED, DESIGN STANDARD : -, CHAMFERING : -, THREAD COARSE PITCH : -, DIMENSIONAL TOLERANCE : -, NUT THREAD TOLERANCE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE,CS,3IN,SCH40,SMLS,BE,5L_GRB,VARNISH OR PROTECTIVE COATING,6MTR,C/W END PROTECTORS,AS PER MHK-COMP-SPE-EP- PVV- 0143  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  LENGTH  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  TEMPERATURE RATING  DESIGN STANDARD  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, METALLIC, TYPE : -, NOMINAL SIZE : 3 IN, LENGTH : 6 M, END CONNECTION : BEVELLED END, SCHEDULE NUMBER : SCH-40, PRESSURE RATING : -, WALL THICKNESS : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A106 GRADE B, COATING/FINISH : VARNISH OR PROTECTIVE COATING, MANUFACTURING PROCESS : SEAMLESS, TEMPERATURE RATING : -, DESIGN STANDARD : API SPEC 5L, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : COMPLETE WITH END PROTECTORS,AS PER MHK-COMP-SPE-EP- PVV- 0143, INTERNAL REMARKS : -


Input: I have material name like this  ===  TYPE "X ",PACKING BORE:2.813"MIN. ID:2. 3.97", LG : 14.58",TOP THD.: 2-3/8" ... PIN X BTMTHD. : 2-3/8" ... EU PIN, PRESTHD. : 2-3/8" ... EU PIN, PRES  ===  Please inform me parameter below:  DESIGN STANDARD  TYPE  TUBING OUTER DIAMETER  WORKING PRESSURE RATING  THREAD  THREAD CONFIGURATION  MATERIAL STANDARD  MATERIAL  PACKING INNER DIAMETER  TUBING WEIGHT  NO-GO INNER DIAMETER  ILLUSTRATION  SERVICE  INSPECTION CERTIFICATE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, LANDING, DESIGN STANDARD : -, TYPE : LOCK PROFILE: X, TUBING OUTER DIAMETER : 2-3/8 IN, WORKING PRESSURE RATING : -, THREAD : -, THREAD CONFIGURATION : PIN TOP X EU PIN BOTTOM, MATERIAL STANDARD : -, MATERIAL : -, PACKING INNER DIAMETER : 2.813 IN, TUBING WEIGHT : -, NO-GO INNER DIAMETER : -, ILLUSTRATION : -, SERVICE : -, INSPECTION CERTIFICATE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : MIN. ID: 2.397 IN, LG: 14.58 IN, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET: 5/32 5N W X 1.1 ID X 1.437 5N OD X 0.066 THK, COOPER, PART FOR 2 IN CHOKE, KERN RIVER PACKING  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  INSIDE DIAMETER  OUTSIDE DIAMETER  THICKNESS  PRESSURE RATING  TEMPERATURE RATING  MATERIAL  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GASKET, FLAT, TYPE : -, NOMINAL SIZE : -, INSIDE DIAMETER : 1.10 IN, OUTSIDE DIAMETER : 1.437 IN, THICKNESS : 0.066 IN, PRESSURE RATING : -, TEMPERATURE RATING : -, MATERIAL : COPPER, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : 5/32 5N W,PART FOR 2 IN CHOKE,KERN RIVER PACKING, INTERNAL REMARKS : -


Input: I have material name like this  ===  === CONNECTOR,RECEPTACLE,ELECTRICAL === CIRCULAR-FEMALE; ALUMINUM ALLOY SHELL; COPPER ALLOY-GOLD CONTACT; RJ45 SOCKET  ===  Please inform me parameter below:  TYPE  CONDUCTOR SIZE  ELECTRICAL RATING  NUMBER OF PINS  SIZE  MATERIAL  INSULATION MATERIAL  STUD/BOLT SIZE  WIRE CONNECTION TYPE  COLOR  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CONNECTOR, ELECTRICAL, TYPE : RECEPTACLE, CONDUCTOR SIZE : -, ELECTRICAL RATING : -, NUMBER OF PINS : -, SIZE : -, MATERIAL : -, INSULATION MATERIAL : -, STUD/BOLT SIZE : -, WIRE CONNECTION TYPE : -, COLOR : -, PART NUMBER : EXM-A01-19-RJF-01A2, MANUFACTURER : AMPHENOL, ADDITIONAL DETAILS : CIRCULAR-FEMALE: ALUMINIUM ALLOY SHELL: COPPER ALLOY-GOLD CONTACT: RJ45 SOCKET, INTERNAL REMARKS : -


Input: I have material name like this  ===  GAUGE, PRESSURE, DIAL INDICATING, BIMA TECHNOLOGIES INC, 1/4 IN, NPT, AISI 304, 0-30 PSIG, TYPE BI-063-LSG, 2 1/2 IN DIAL, CENTER BACK CONNECTION, LIQUID FILLED, PANEL MOUNTED  ===  Please inform me parameter below:  TYPE  MEASURING RANGE  DIAL SIZE  ACCURACY  CASE MATERIAL  FILLED  PROCESS CONNECTION SIZE  CONNECTION LOCATION  MOUNTING TYPE  TEMPERATURE RATING  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GAUGE, PRESSURE, TYPE : -, MEASURING RANGE : -, DIAL SIZE : 2-1/2 IN, ACCURACY : -, CASE MATERIAL : -, FILLED : LIQUID, PROCESS CONNECTION SIZE : 1/4 IN NPT, CONNECTION LOCATION : CENTER BACK, MOUNTING TYPE : PANEL, TEMPERATURE RATING : -, MODEL NUMBER : BI-063-LSG, PART NUMBER : -, MANUFACTURER : BIMA, ADDITIONAL DETAILS : DIAL INDICATING,AISI 304,0-30 PSIG, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELBOW; SIZE : 1/4 X 3/8 ; CONNECTION : MALE ; PART NUMBER : SS-400-2-6 ; MANUFACTURER NAME : SWAGELOK  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  ANGLE  RADIUS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELBOW, TUBE, TYPE : -, NOMINAL SIZE : 1/4 X 3/8 IN, END CONNECTION : MALE, PRESSURE RATING : -, ANGLE : -, RADIUS : -, MATERIAL : STAINLESS STEEL, MATERIAL STANDARD : -, COATING/FINISH : -, PART NUMBER : SS-400-2-6, MANUFACTURER : SWAGELOK, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  COMPOUND,SEALING, PART NUMBER: SC-5LB, MANUFACTURER: KILLARK, ADDITIONAL DETAILS: APPLICATION EXPLOSION PROOF FITTINGS  ===  Please inform me parameter below:  TYPE  MATERIAL  PACKAGING  COLOR  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: COMPOUND, SEALING, TYPE : -, MATERIAL : -, PACKAGING : -, COLOR : -, TEMPERATURE RATING : -, PART NUMBER : SC-5LB, MANUFACTURER : KILLARK, ADDITIONAL DETAILS : APPLICATION EXPLOSION PROOF FITTINGS, INTERNAL REMARKS : -


Input: I have material name like this  ===  FERRULE SET + NUTMATERIAL : 316 SSSIZE : 3/8IN ODPART NUMBER : 760LS SS 3/8 + 761L SS 3/8MANUFACTURE : HAM-LET, USA  ===  Please inform me parameter below:  TYPE  APPLICATION  MATERIAL  SIZE  PACKAGING UNIT  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FERRULE, TUBE, TYPE : -, APPLICATION : -, MATERIAL : STAINLESS STEEL-316, SIZE : OD: 3/8 IN, PACKAGING UNIT : -, PART NUMBER : 760LS SS 3/8 + 761L SS 3/8, MANUFACTURER : HAMLET, ADDITIONAL DETAILS : FERRULE SET + NUTMATERIAL: STAINLESS STEEL-316, INTERNAL REMARKS : -


Input: I have material name like this  ===  RELAY,ELECTROMAGNETIC, TYPE: MANUAL RESET, PART NUMBER: HLR 7810-3, MANUFACTURER: FISHER, ADDITIONAL DETAILS: SIZE : 1/4 IN F-NPT  ===  Please inform me parameter below:  TYPE  NUMBER OF POLES  CONTACT CONFIGURATION  NUMBER OF PHASE  POWER RATING  VOLTAGE RATING  COIL VOLTAGE  CURRENT RATING  FREQUENCY  ENCLOSURE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: RELAY, ELECTROMAGNETIC, TYPE : MANUAL RESET, NUMBER OF POLES : -, CONTACT CONFIGURATION : -, NUMBER OF PHASE : -, POWER RATING : -, VOLTAGE RATING : -, COIL VOLTAGE : -, CURRENT RATING : -, FREQUENCY : -, ENCLOSURE : -, PART NUMBER : HLR 7810-3, MANUFACTURER : FISHER, ADDITIONAL DETAILS : SIZE : 1/4 IN F-NPT, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE, DUPLEX SSTL, ASTM A790 UNS S31803, 4.500 IN OD, 114.3 MM OD, BEV END, SCH 80, XS, 4 IN, SMLS, .337 IN WALL, 8.56 MM WALL, 14.98 LB/FT, 22.32 KG/M  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  LENGTH  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  TEMPERATURE RATING  DESIGN STANDARD  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, METALLIC, TYPE : -, NOMINAL SIZE : 4 IN, LENGTH : -, END CONNECTION : BEVELED END, SCHEDULE NUMBER : SCH-80,XS, PRESSURE RATING : -, WALL THICKNESS : 337 IN,8.56 MM, MATERIAL : DUPLEX STAINLESS STEEL, MATERIAL STANDARD : ASTM A790,UNS S31803, COATING/FINISH : -, MANUFACTURING PROCESS : SEAMLESS, TEMPERATURE RATING : -, DESIGN STANDARD : -, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : OD: 4.500 IN,OD: 114.3 MM,14.98 LB/FT,22.32 KG/M, INTERNAL REMARKS : -


Input: I have material name like this  ===  CELL,MEASURING, TYPE: OXYGEN ANALYSER, PART NUMBER: 8317710, MANUFACTURER: DRAEGER, ADDITIONAL DETAILS: POLYTRON 7000  ===  Please inform me parameter below:  TYPE  INPUT RATING  MATERIAL  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CELL, MEASURING, TYPE : OXYGEN ANALYSER, INPUT RATING : -, MATERIAL : -, TEMPERATURE RATING : -, PART NUMBER : 8317710, MANUFACTURER : DRAEGER, ADDITIONAL DETAILS : POLYTRON 7000, INTERNAL REMARKS : -


Input: I have material name like this  ===  NO.91290A319; M6 14 MM (100EA/PKG) METRIC SOCKET HEAD,HEAT- TREATED BLACK ALLOY STEEL, CLASS 12.9 (METRIC)-DINSTEEL, CLASS 12.9 (METRIC)-DIN  ===  Please inform me parameter below:  TYPE  MATERIAL  MATERIAL STANDARD  COATING/FINISH  THREAD TYPE  TPI/PITCH  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SCREW, SOCKET HEAD, TYPE : -, MATERIAL : HEAT- TREATED BLACK ALLOY STEEL, MATERIAL STANDARD : CLASS 12.9-DIN, COATING/FINISH : -, THREAD TYPE : METRIC, TPI/PITCH : -, SIZE : M6, LENGTH : 14 MM, PART NUMBER : NO.91290A319, MANUFACTURER : -, ADDITIONAL DETAILS : 100EA/PKG, INTERNAL REMARKS : -


Input: I have material name like this  ===  GAUGE: PRESSURE,0-60 PSI, 1.5& ASHCROFT 15W-1005H-01B-0/60PSI DIA; 1/8 IN; MNPT; CBC; BLACK STEEL CASE; POLYCARBONATE WINDOW; BRASS SOCKET; BRONZE TUBE & BRASS SOCKET MATL; ADJUSTABLE POINTER;  ===  Please inform me parameter below:  TYPE  MEASURING RANGE  DIAL SIZE  ACCURACY  CASE MATERIAL  FILLED  PROCESS CONNECTION SIZE  CONNECTION LOCATION  MOUNTING TYPE  TEMPERATURE RATING  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GAUGE, PRESSURE, TYPE : -, MEASURING RANGE : 0 TO 60 PSI, DIAL SIZE : 1-1/2 IN, ACCURACY : -, CASE MATERIAL : BLACK STEEL, FILLED : -, PROCESS CONNECTION SIZE : 1/8 IN MNPT, CONNECTION LOCATION : -, MOUNTING TYPE : -, TEMPERATURE RATING : -, MODEL NUMBER : 15W-1005H-01B-0/60PSI, PART NUMBER : -, MANUFACTURER : ASHCROFT, ADDITIONAL DETAILS : CBC,POLYCARBONATE WINDOW,BRASS SOCKET,BRONZE TUBE AND BRASS SOCKET MATL,ADJUSTABLE POINTER, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE: DRILL, WIPER PLUGS, 4-1/2 IN, 16.6 LB/FT, TIW DRILL PIPE WIPER PLUGS: 4-1/2 16.6#, TIW MEC NO: 754000314 HS NO: 000000000  ===  Please inform me parameter below:  DESIGN STANDARD  PIPE SIZE  SIZE OF BORE  LENGTH RANGE  WEIGHT  CONNECTION  MATERIAL STANDARD  MATERIAL  INTERNAL COATING/FINISH  TOOL JOINT STANDARD  TOOL JOINT TYPE  TOOL JOINT HARDFACING  SERVICE  INSPECTION CERTIFICATE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, LINE, DESIGN STANDARD : -, PIPE SIZE : 4-1/2 IN, SIZE OF BORE : -, LENGTH RANGE : -, WEIGHT : 16.60 PPF, CONNECTION : -, MATERIAL STANDARD : -, MATERIAL : -, INTERNAL COATING/FINISH : -, TOOL JOINT STANDARD : -, TOOL JOINT TYPE : -, TOOL JOINT HARDFACING : -, SERVICE : -, INSPECTION CERTIFICATE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : TIW DRILL PIPE WIPER PLUGS,16.6 PPF, INTERNAL REMARKS : MEC NO: 754000314 HS NO: 000000000


Input: I have material name like this  ===  1-1/2" 3000PSI,FEMALE,C/W.3/4" NPT TAPPFORGET STEEL,RAISED FOR FULL FACE, API TYPE 6B ( ASTM A-105FACE, API TYPE 6B ( ASTM A-105  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  FLANGE FACING  DIMENSIONAL STANDARD  THICKNESS  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FLANGE, PIPE, TYPE : -, NOMINAL SIZE : 1-1/2 X 3/4 IN, PRESSURE RATING : 3000 PSI, MATERIAL : FORGED STEEL, MATERIAL STANDARD : ASTM A105/API TYPE 6B, COATING/FINISH : -, FLANGE FACING : RAISED FOR FULL FACE, DIMENSIONAL STANDARD : -, THICKNESS : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : FEMALE,C/W. NPT TAPP, INTERNAL REMARKS : -


Input: I have material name like this  ===  PLUG, CEMENT, 13-3/8 NON ROTATING TOP + BOTTOM, FOR 13-3/8" CASING SIZE,72 PPF, P-110, NON ROTATING (PDC DRILLABLE), HIGH STRENGTH FOR TESTINGUP TO 7000 PSI.  ===  Please inform me parameter below:  DESIGN STANDARD  CEMENTING STAGE  TYPE  MATERIAL  INSERT MATERIAL  COLOR  CASING SIZE  CASING WEIGHT  AREA FLOW  CASING THREAD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PLUG, CEMENTING, DESIGN STANDARD : -, CEMENTING STAGE : -, TYPE : NON ROTATING BOTTOM AND TOP, MATERIAL : -, INSERT MATERIAL : -, COLOR : -, CASING SIZE : 13-3/8 IN, CASING WEIGHT : 72 PPF, AREA FLOW : -, CASING THREAD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : API GRADE P-110, PDC DRILLABLE, HIGH STRENGTH FOR TESTINGUP TO 7000 PSI, INTERNAL REMARKS : -


Input: I have material name like this  ===  LAMP; TYPE : LED PILOT ; VOLTAGE : 220 VAC ; COLOR : BLUE ; PART NUMBER : XB5AVB6 ; MANUFACTURER NAME : SCHNEIDER  ===  Please inform me parameter below:  TYPE  APPLICATION  BASE TYPE  COLOR  FREQUENCY  WATTAGE  CURRENT RATING  VOLTAGE RATING  DIMENSION  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: LAMP, PILOT, TYPE : -, APPLICATION : -, BASE TYPE : -, COLOR : BLUE, FREQUENCY : -, WATTAGE : -, CURRENT RATING : -, VOLTAGE RATING : 220 VAC, DIMENSION : -, MANUFACTURER : SCHNEIDER, PART NUMBER : XB5AVB6, ADDITIONAL DETAILS : LAMP,TYPE : LED PILOT,PART NUMBER : XB5AVB6,MANUFACTURER NAME : SCHNEIDER, INTERNAL REMARKS : -


Input: I have material name like this  ===  SWITCH; LIMIT; ELECTRIC; PART NUMBER: 2249ABYN00022AAA-IR1; MANUFACTURER: WESTLOCK CONTROLS CORPORATION  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  POWER RATING  FREQUENCY  MOUNTING TYPE  TEMPERATURE RATING  ACTION  ENCLOSURE TYPE  ENCLOSURE RATING  CONTACT CONFIGURATION  OPERATOR TYPE  NUMBER OF POLE  CONNECTION TYPE  MATERIAL  CABLE ENTRY  ACTUATION SPEED  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SWITCH, LIMIT, TYPE : -, VOLTAGE RATING : -, CURRENT RATING : -, POWER RATING : -, FREQUENCY : -, MOUNTING TYPE : -, TEMPERATURE RATING : -, ACTION : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, CONTACT CONFIGURATION : -, OPERATOR TYPE : -, NUMBER OF POLE : -, CONNECTION TYPE : -, MATERIAL : -, CABLE ENTRY : -, ACTUATION SPEED : -, MODEL NUMBER : -, PART NUMBER : 2249ABYN00022AAA-IR1, MANUFACTURER : WESTLOCK, ADDITIONAL DETAILS : ELECTRIC, INTERNAL REMARKS : -


Input: I have material name like this  ===  SPOOL,TUBING HEAD, SIZE: 11 X 7-1/16 IN, TOP PRESSURE RATING: 1000 PSI WP, BOTTOM PRESSURE RATING: 10000 PSI, ADDITIONAL DETAILS: ASSY. TCM-BG-PE-ET,W/TWO  ===  Please inform me parameter below:  DESIGN STANDARD  TYPE  SIZE  FLANGE CONNECTION SIZE  CONNECTION STYLE  TOP PRESSURE RATING  BOTTOM PRESSURE RATING  TEMPERATURE CLASSIFICATION  MATERIAL STANDARD  MATERIAL  MINIMUM BORE  OVERALL HEIGHT  SIDE OUTLET SIZE  SIDE OUTLET STYLE  NUMBER OF SIDE OUTLETS  BOTTOM PACK-OFF SIZE  LOCK DOWN RING SIZE  RING IDENTIFICATION NUMBER  RESILIENT SEAL TYPE  NUMBER OF RESILIENT SEALS  VALVE REMOVAL THREAD SIZE  SERVICE  INSPECTION CERTIFICATE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPOOL, TUBING HEAD, DESIGN STANDARD : -, TYPE : -, SIZE : 11 X 7-1/16 IN, FLANGE CONNECTION SIZE : -, CONNECTION STYLE : -, TOP PRESSURE RATING : 1000 PSI WP, BOTTOM PRESSURE RATING : 10000 PSI, TEMPERATURE CLASSIFICATION : -, MATERIAL STANDARD : -, MATERIAL : -, MINIMUM BORE : -, OVERALL HEIGHT : -, SIDE OUTLET SIZE : -, SIDE OUTLET STYLE : -, NUMBER OF SIDE OUTLETS : -, BOTTOM PACK-OFF SIZE : -, LOCK DOWN RING SIZE : -, RING IDENTIFICATION NUMBER : -, RESILIENT SEAL TYPE : -, NUMBER OF RESILIENT SEALS : -, VALVE REMOVAL THREAD SIZE : -, SERVICE : -, INSPECTION CERTIFICATE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : ASSY. TCM-BG-PE-ET,W/TWO, INTERNAL REMARKS : -


Input: I have material name like this  ===  NIPPLE, LANDING, LOW ALLOY STEEL, TYPE WP-1, HYDRIL / CS CONNECTION NON API, TUBING OUTSIDE DIAMETER SIZE: 2 7/8 IN BOX X PIN, SEAL  ===  Please inform me parameter below:  DESIGN STANDARD  TYPE  TUBING OUTER DIAMETER  WORKING PRESSURE RATING  THREAD  THREAD CONFIGURATION  MATERIAL STANDARD  MATERIAL  PACKING INNER DIAMETER  TUBING WEIGHT  NO-GO INNER DIAMETER  ILLUSTRATION  SERVICE  INSPECTION CERTIFICATE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, LANDING, DESIGN STANDARD : API, TYPE : WP-1, TUBING OUTER DIAMETER : 2-7/8 IN, WORKING PRESSURE RATING : -, THREAD : -, THREAD CONFIGURATION : TENARIS HYDRIL CS, MATERIAL STANDARD : -, MATERIAL : LOW ALLOY STEEL, PACKING INNER DIAMETER : -, TUBING WEIGHT : -, NO-GO INNER DIAMETER : -, ILLUSTRATION : -, SERVICE : -, INSPECTION CERTIFICATE : -, PART NUMBER : 33570-000-25014, MANUFACTURER : CAMCO, ADDITIONAL DETAILS : NON API,BOX X PIN,SEAL, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT, STUD, FULL THREADED, ALLOY STEEL, 5/8 IN, GR B7, UNC, ASTM A193, 3 1/2 IN LG, FLUORO CARBON COATED, W/O NUTS  ===  Please inform me parameter below:  DESIGN STANDARD  STUD BOLT MATERIAL  STUD BOLT MATERIAL STANDARD  NUT TYPE  NUT MATERIAL STANDARD  COATING/FINISH  NUMBER OF NUT(S) PER STUD BOLT  THREAD CLASS SYMBOL(BOLT/NUT)  THREAD TYPE  THREAD COARSE PITCH  THREAD LENGTH  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD BOLT, WITH NUT, DESIGN STANDARD : -, STUD BOLT MATERIAL : ALLOY STEEL, STUD BOLT MATERIAL STANDARD : ASTM A193 GRADE B7, NUT TYPE : -, NUT MATERIAL STANDARD : -, COATING/FINISH : FLUOROCARBON COATED, NUMBER OF NUT(S) PER STUD BOLT : -, THREAD CLASS SYMBOL(BOLT/NUT) : -, THREAD TYPE : UNC, THREAD COARSE PITCH : -, THREAD LENGTH : FULL THREADED, SIZE : 5/8 IN, LENGTH : 3-1/2 IN, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : W/O NUTS, INTERNAL REMARKS : -


Input: I have material name like this  ===  MODULE, DISCRETE, DC INPUT, ALLEN BRADLEY CO, 1771-IBN, REV C, 10-30V DC, FOR SCR SN EA1 6-93, XJ1, 96211882  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  POWER SUPPLY  INTERFACE TYPE  MATERIAL  MOUNTING TYPE  SIZE  ENCLOSURE TYPE  ENCLOSURE RATING  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: MODULE, ANALOG, TYPE : -, VOLTAGE RATING : -, CURRENT RATING : -, POWER SUPPLY : -, INTERFACE TYPE : -, MATERIAL : -, MOUNTING TYPE : -, SIZE : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, TEMPERATURE RATING : -, PART NUMBER : 1771-IBN, MANUFACTURER : ALLEN-BRADLEY, ADDITIONAL DETAILS : DISCRETE,DC INPUT,REV C,10-30V DC,FOR SCR SN EA1 6-93,XJ1,96211882, INTERNAL REMARKS : -


Input: I have material name like this  ===  SCH 160 TOE X POE,SIZE:3/4"DIA X 4" LG MANUFACTURED TOANSI/ASME B16.11 MATERIAL ASTMA-106 GR.B A-106 GR.B  ===  Please inform me parameter below:  TYPE/STRUCTURE  SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, PIPE, TYPE/STRUCTURE : -, SIZE : 3/4 IN, END CONNECTION : THREADED ONE END X PLAIN ONE END, SCHEDULE NUMBER : SCH-160, PRESSURE RATING : -, WALL THICKNESS : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A106 GRADE B, COATING/FINISH : -, LENGTH : 4 IN, DIMENSIONAL STANDARD : ASME B16.11, PART NUMBER : -, MANUFACTURER : LG, ADDITIONAL DETAILS : D TOANSI, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE; SIZE : 16" DIA, 12.7 MM THK ; LENGTH : 12 M/ JOINT ; MATERIAL : COATED W/ ASPHALT ENAMEL AND CONCRETE WEIGHT COAT ; SPECIFICATION : API 5L ; GRADE : X65  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  LENGTH  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  TEMPERATURE RATING  DESIGN STANDARD  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, METALLIC, TYPE : -, NOMINAL SIZE : DIA: 16 IN, LENGTH : 12 M/JT, END CONNECTION : -, SCHEDULE NUMBER : -, PRESSURE RATING : -, WALL THICKNESS : 12.70 MM (1/2 IN), MATERIAL : CARBON STEEL, MATERIAL STANDARD : API 5L GRADE X65, COATING/FINISH : -, MANUFACTURING PROCESS : -, TEMPERATURE RATING : -, DESIGN STANDARD : -, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : COATED W/ASPHALT ENAMEL AND CONCRETE WEIGHT COAT, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE: RELIEF, SAFETY CP-DSI-0553-2 06FGS-GS-PSV-805 VALVE: RELIEF, SAFETY, SPEC: CP-DSI-0553-2 06FGS-GS-PSV-805A MEC NO: 524153541 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  MATERIAL  CONSTRUCTION TYPE  CONFIGURATION  OPERATED TYPE  TRIM MATERIAL  SET PRESSURE  OPERATING PRESSURE  TEMPERATURE RATING  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  SERVICE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, RELIEF, TYPE : SAFETY, NOMINAL SIZE : -, END CONNECTION : -, SCHEDULE NUMBER : -, PRESSURE RATING : -, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, MATERIAL : -, CONSTRUCTION TYPE : -, CONFIGURATION : -, OPERATED TYPE : -, TRIM MATERIAL : -, SET PRESSURE : -, OPERATING PRESSURE : -, TEMPERATURE RATING : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, SERVICE : -, MODEL NUMBER : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : SPEC: CP-DSI-0553-2 06FGS-GS-PSV-805A, INTERNAL REMARKS : MEC NO: 524153541 HS NO: 000000000