Input: I have material name like this  ===  CONDENSATE DRAIN, MODEL: BM14CO, PRESSURE RANGE: 12 - 230 PSIG, TEMPRATURE RANGE: +1 TO +60 DEG CELCIUS, CONDENSATE FEED CONNECTION: 3/4" NPT, CONDENSATE DISCHARGE (HOSE) : 1/2", MATERIAL HOUSING : ALUMINIUM, HARD COATED, SUPPLY VOLTAGE : 24 VDC, PROTECTION CLASS : IP65, MFCR : BEKOMAT  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CONDENSATE DRAIN, MANUFACTURER REFERENCE NUMBER : -, MANUFACTURER : BEKOMAT, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : MODEL: BM14CO, PRESSURE RANGE: 12 - 230 PSIG, TEMPERATURE RANGE: +1 TO +60 DEG CELCIUS, CONDENSATE FEED CONNECTION: 3/4 IN NPT, CONDENSATE DISCHARGE (HOSE) : 1/2 IN, MATERIAL HOUSING : ALUMINIUM, HARD COATED, SUPPLY VOLTAGE : 24 VDC, PROTECTION CLASS : IP65, INTERNAL REMARKS : -


Input: I have material name like this  ===  CARD SPEED DIESEL CONTROL P/N : N560095360 TYPE : VG704/99 DESIGNATION : 2H ENERGY DIESEL GENERATOR SET SISI-NUBI BRAND : FPT-INDUSTRIAL (2H ENERGY)  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CARD,SPEED DIESEL CONTROL, MANUFACTURER REFERENCE NUMBER : N560095360, MANUFACTURER : 2H ENERGY, SIZE : -, MATERIAL : -, EQUIPMENT NAME : DIESEL GENERATOR SET, ADDITIONAL DETAILS : TYPE : VG704/99 DESIGNATION : 2H ENERGY SISI-NUBI, INTERNAL REMARKS : -


Input: I have material name like this  ===  NUT: 9/16 IN HEX FOR COMPRES- SOR MODEL 440VMC,VILTER 13253B VILTER 13253B NUT, 9/16 IN HEX FOR COMPRESSOR MODEL 440VMC  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : NUT,HEXAGONAL, MANUFACTURER REFERENCE NUMBER : 13253B, MANUFACTURER : VILTER, SIZE : -, MATERIAL : -, EQUIPMENT NAME : COMPRESSOR, ADDITIONAL DETAILS : EQUIPMENT MODEL: 440VMC,NUT: 9/16 IN HEX FOR COMPRES- SOR,NUT,9/16 IN HEX FOR, INTERNAL REMARKS : -


Input: I have material name like this  ===  DO NOT REORDER "STAND, COMP. PROP. (MOTOR CYCLE,MODEL TS 125 ER) (MOTOR CYCLE,MODEL TS 125 ER)  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : STAND,COMP PROP, MANUFACTURER REFERENCE NUMBER : 42310-05200-L000, MANUFACTURER : SUZUKI, SIZE : -, MATERIAL : -, EQUIPMENT NAME : TWO WHEELER, ADDITIONAL DETAILS : EQUIPMENT MODEL:TS 125 ER,DO NOT REORDER ; PROP. (;MODEL ; ER) (;MODEL ; ER, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIN: FOR MOD 660, CASE H674109 CASE H674109 PIN FOR MOD.660 MEC NO: 930301110 HS NO: 000000000  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PIN, MANUFACTURER REFERENCE NUMBER : H674109, MANUFACTURER : CASE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : MODEL: 660,: FOR,FOR MOD.660 MEC NO: 930301110 HS NO: 000000000, INTERNAL REMARKS : -


Input: I have material name like this  ===  BREAKER,CIRCUIT:3P,5A; MANUFACTURER: MITSUBISHI; P/N: NF30-SW 3P-5AT  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  FRAME RATING  INTERRUPT RATING  NUMBER OF POLE  SIZE  INSTANTANEOUS TRIP SETTING RNG  TERMINAL TYPE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BREAKER, CIRCUIT, TYPE : -, CURRENT RATING : 5 A, VOLTAGE RATING : -, FRAME RATING : -, INTERRUPT RATING : -, NUMBER OF POLE : 3, SIZE : -, INSTANTANEOUS TRIP SETTING RNG : -, TERMINAL TYPE : -, MOUNTING TYPE : -, PART NUMBER : NF30-SW 3P-5AT, MANUFACTURER : MITSUBISHI, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  CHEMICAL; TYPE : D193 ULTRALITE ADDITIVE ; CONTAINER : 53GAL/DRUM  ===  Please inform me parameter below:  CHEMICAL NAME  FORM  PACKAGING  COMPOSITION  COLOR  MSDS NUMBER  GRADE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CHEMICAL, CHEMICAL NAME : D193 ULTRALITE ADDITIVE, FORM : -, PACKAGING : 53 GAL/DRUM, COMPOSITION : -, COLOR : -, MSDS NUMBER : -, GRADE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: BOLT,MACHINE,HEXAGONAL HEAD, MANUFACTURER REFERENCE NUMBER: 0147-1363-03, MANUFACTURER: ATLAS COPCO, SIZE: DIA: M10 X LG: 30 MM, MATERIAL: ZINC  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : BOLT,MACHINE,HEXAGONAL HEAD, MANUFACTURER REFERENCE NUMBER : 0147-1363-03, MANUFACTURER : ATLAS COPCO, SIZE : DIA: M10 X LG: 30 MM, MATERIAL : ZINC, EQUIPMENT NAME : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  ALTRONIC DIGITAL TACHOMETERPARTS FOR : COMPRESSORT Y P E : DPC-360 EML-2MANUFACTURER : COOPER ENERGY - U S A.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : TACHOMETER,DIGITAL,ALTRONIC, MANUFACTURER REFERENCE NUMBER : DHT-3200, MANUFACTURER : COOPER ENERGY, SIZE : -, MATERIAL : -, EQUIPMENT NAME : COMPRESSOR, ADDITIONAL DETAILS : EQUIPMENT MODEL:DPC-360 EML-2, INTERNAL REMARKS : -


Input: I have material name like this  ===  LOCK NUT; PART NUMBER : P-102094 ; MANUFACTURER NAME : BROADY ; ADDITIONAL INFO 1 : FOR FIRE HYDRANT REDUCING VALVE, TYPE DH-6  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : NUT,LOCK, MANUFACTURER REFERENCE NUMBER : P-102094, MANUFACTURER : BROADY FLOW CONTROL, SIZE : -, MATERIAL : -, EQUIPMENT NAME : FIRE HYDRANT REDUCING VALVE, ADDITIONAL DETAILS : EQUIPMENT MODEL:TYPE DH-6, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE,BALL,4IN,2500LB,RTJ FLANGE ENDS,AS PER DATA SHEET: BAL 2CJ 250B REV.5  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  END TO END DIMENSION  BODY MATERIAL  BODY MATERIAL STANDARD  CONSTRUCTION TYPE  STYLE  PORT TYPE  TEMPERATURE RATING  TRIM MATERIAL  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  OPERATED TYPE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, BALL, TYPE : -, NOMINAL SIZE : 4 IN, END CONNECTION : RING TYPE JOINT FLANGE, PRESSURE RATING : CLASS 2500, END TO END DIMENSION : -, BODY MATERIAL : CARBON STEEL, BODY MATERIAL STANDARD : ASTM A105 OR ASTM A216 GRADE WCB, CONSTRUCTION TYPE : -, STYLE : -, PORT TYPE : -, TEMPERATURE RATING : -, TRIM MATERIAL : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, OPERATED TYPE : -, MODEL NUMBER : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : AS PER DATA SHEET : BAL 2CJ 250B REV.5


Input: I have material name like this  ===  BELT, P/N 3101314, MODEL NO : 10AEF20, MFR.: PEERLESS PUMP FOR SNO-P-9016A/B, FIRE WATER PUMP  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : BELT, MANUFACTURER REFERENCE NUMBER : 3101314, MANUFACTURER : PEERLESS PUMP, SIZE : -, MATERIAL : -, EQUIPMENT NAME : FIRE WATER PUMP, ADDITIONAL DETAILS : EQUIPMENT MODEL: 10AEF20,FOR SNO-P-9016A/B, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIN: COIL SUPPORT 7/8X4-1/2 25CR12NI F/50MM, BTU/HR PIN: COIL SUPPORT 7/8X4-1/2 25CR12NI FOR 50MM, BTU/HR STRUTHER STEAM GENERATOR MEC NO: 560435014 HS NO: 840490200  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PIN,SUPPORT,COIL, MANUFACTURER REFERENCE NUMBER : -, MANUFACTURER : STRUTHER, SIZE : -, MATERIAL : -, EQUIPMENT NAME : STEAM GENERATOR, ADDITIONAL DETAILS : 7/8X4-1/2 25CR12NI F/50MM BTU/HR:7/8X4-1/2 25CR12NI FOR 50MM BTU/HR, INTERNAL REMARKS : MEC NO:560435014 HS NO:840490200


Input: I have material name like this  ===  KIT:SPARE PARTS,FUEL GAS SCRUBBER SKID; MANUFACTURER: GE; P/N: IRR220310146  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : KIT,FUEL GAS SCRUBBER,SKID, MANUFACTURER REFERENCE NUMBER : IRR220310146, MANUFACTURER : GENERAL ELECTRIC, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  FILTER,OIL,MICROLITE,SPIN-ON FULL FLOW, 4.65" OD, 10.24" LG, THREAD SIZE1-1/2" - 12, GASKET SIZE 4.32" OD X 3.85" ID, GM P/N:25010495/25010042,PARTS FOR : ENGINE GM 8V-71, DETROIT DIESEL, EQUAL TO: AC DELCO PF911,BALDWIN B96, DONALDSON P551670.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : FILTER,OIL, MANUFACTURER REFERENCE NUMBER : 25010495/25010042, MANUFACTURER : DETROIT DIESEL, SIZE : OD: 4.65 X LG: 10.24 X 1-1/2-12 X ID: 3.85 X OD: 4.32 IN, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : MODEL:GM-8V-71,MICROLITE,SPIN-ON FULL FLOW,EQUAL TO:AC DELCO PF911,BALDWIN B96,DONALDSON P551670, INTERNAL REMARKS : -


Input: I have material name like this  ===  BRIDGE RECTIFIER CONTROL PANEL ELECTRICAL - KBPC MATERIAL - METAL  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  SIZE  ENCLOSURE  MATERIAL  FREQUENCY  NUMBER OF PHASE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PANEL, CONTROL, TYPE : -, VOLTAGE RATING : -, CURRENT RATING : -, SIZE : -, ENCLOSURE : -, MATERIAL : -, FREQUENCY : -, NUMBER OF PHASE : -, PART NUMBER : HK013SP12, MANUFACTURER : HYUNDAI, ADDITIONAL DETAILS : BRIDGE RECTIFIER,ELECTRICAL - KBPC MATERIAL - METAL, INTERNAL REMARKS : -


Input: I have material name like this  ===  WEAR BUSHING, TYPE C-29 13-5/8" NOMINAL X 12.5" ID, (FOR : SERVICE TOOL)  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : BUSHING,WEAR, MANUFACTURER REFERENCE NUMBER : -, MANUFACTURER : -, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : TYPE C-29 13-5/8 IN NOMINAL X 12.5 IN ID, (FOR : SERVICE TOOL), INTERNAL REMARKS : -


Input: I have material name like this  ===  SAFELIFT VERTICAL DRUM CLAMP, MODEL NO.:VDC1, BRAND/MANUFACTURE: SAFELIFT OFFSHORE LTD, WITH FOUR-LEG CHAIN SLING ASSEMBLY,SAFETY BASKET, PAINTED TO OFFSHORE SPECIFICATION, SWL:500KGS, WEIGHT: 19 KGS, COMPLETED WITH LOAD TEST AND NDT CERTIFICATE(SEE PICTURE ATTACHMENT)  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CLAMP,DRUM, MANUFACTURER REFERENCE NUMBER : VDC1, MANUFACTURER : SAFELIFT OFFSHORE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : MODEL:NO.:VDC1,VERTICAL,WITH FOUR-LEG CHAIN SLING ASSEMBLY,SAFETY BASKET,PAINTED TO,SPECIFICATION,SWL:500KGS,WEIGHT:19 KGS,COMPLETED WITH LOAD TEST AND NDT CERTIFICATE(SEE PICTURE ATTACHMENT), INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: MOUNTING SET,PIPE, MANUFACTURER REFERENCE NUMBER: M3806JA-SP, MANUFACTURER: YOKOGAWA, SIZE: 2 IN  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : MOUNTING SET,PIPE, MANUFACTURER REFERENCE NUMBER : M3806JA-SP, MANUFACTURER : YOKOGAWA, SIZE : 2 IN, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  O-RING; INSIDE DIAMETER : 364 MM ; OUTSIDE DIAMETER : 380 MM ; ADDITIONAL INFO 1 : ITEM 522, PART F/ F.O BURNER PUMP (2 UNIT), MDL: ; ADDITIONAL INFO 2 : MSH-6X, MFR: TAIKOKIKAI INDUSTRIES CO.LTD., ; ADDITIONAL INFO 3 : FPS-P-8311, FPS-P-8312  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : O-RING, MANUFACTURER REFERENCE NUMBER : IT.522, MANUFACTURER : TAIKO KIKAI, SIZE : ID: 364 X OD: 380 MM, MATERIAL : -, EQUIPMENT NAME : F.O BURNER PUMP, ADDITIONAL DETAILS : EQUIPMENT MODEL:MSH-6X,ITEM 522,PART (2 UNIT),FPS-P-8311,FPS-P-8312, INTERNAL REMARKS : -


Input: I have material name like this  ===  RINGSET (.020) FOR 2 PISTON, P/N.10R1238; PART FOR : ENGINE MM (MINNEAPOLIS MOLINE) MODEL : HD800A-6A; S/N : 34901430 AND AFTER; MFCR :HOPKINS, MINNESOTA - USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : RING SET, MANUFACTURER REFERENCE NUMBER : 10R1238, MANUFACTURER : MINNEAPOLIS MOLINE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : MODEL:HD-800A-6A,SERIAL NUMBER:34901430 AND AFTER,PART FOR 2 PISTON,020, INTERNAL REMARKS : -


Input: I have material name like this  ===  TEE; SIZE : 3/8" OD X 1/4" MNPT ; CONNECTION : MALE ; MATERIAL : 316L SS ; PART NUMBER : SS-600-3TMT ; MANUFACTURER NAME : SWAGELOK ; ADDITIONAL INFO 1 : RUN  ===  Please inform me parameter below:  TYPE  NOMINAL RUN SIZE  NOMINAL BRANCH SIZE  RUN CONNECTION  BRANCH CONNECTION  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TEE, TUBE, TYPE : -, NOMINAL RUN SIZE : 3/8 IN, NOMINAL BRANCH SIZE : 1/4 IN, RUN CONNECTION : MALE, BRANCH CONNECTION : -, PRESSURE RATING : -, MATERIAL : STAINLESS STEEL-316L, MATERIAL STANDARD : -, COATING/FINISH : -, LENGTH : -, PART NUMBER : SS-600-3TMT, MANUFACTURER : SWAGELOK, ADDITIONAL DETAILS : TEE,3/8 IN OD X 1/4 IN MNPT,CONNECTION:,MATERIAL: 316L SSADDITIONAL INFO 1: RUN, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET ,FLANGE TO MANIFOLD, MM, P/N 20-0000306; PART FOR ENGINE MM SN :34900001 UP.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET,FLANGE TO MANIFOLD, MANUFACTURER REFERENCE NUMBER : 20-0000306, MANUFACTURER : MINNEAPOLIS MOLINE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : SERIAL NUMBER:34900001, INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: GASKET, MANUFACTURER REFERENCE NUMBER: 51202-10-181, MANUFACTURER: MAN DIESEL AND TURBO, EQUIPMENT NAME: ENGINE, ADDITIONAL DETAILS: ACCEPTABLE,STX  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET, MANUFACTURER REFERENCE NUMBER : 51202-10-181, MANUFACTURER : MAN DIESEL AND TURBO, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : ACCEPTABLE,STX, INTERNAL REMARKS : -


Input: I have material name like this  ===  CLAMP, HOSEPART FOR : GAS ENGINEMODEL/TYPE : F-817DRAWING NUMBER : N/ASERIAL NUMBER : 102566MANUFACTURE : WAUKESHA,PEARCE INDUSTRIES  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CLAMP,HOSE, MANUFACTURER REFERENCE NUMBER : B5078(41236G), MANUFACTURER : WAUKESHA, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINES,GAS, ADDITIONAL DETAILS : EQUIPMENT MODEL:F-817,SERIAL NUMBER:102566, INTERNAL REMARKS : -


Input: I have material name like this  ===  TEE,PIPEMATERIAL : CARBON STEELSPECIFICATION : ASTM A234GRADE : WPBRATING : SCH 80CONNECTION : BUTT WELDSIZE : 3 IN X 3 INADDITIONAL DETAIL: C/W MILL CERTIFICATE  ===  Please inform me parameter below:  TYPE  NOMINAL RUN SIZE  NOMINAL BRANCH SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TEE, PIPE, TYPE : -, NOMINAL RUN SIZE : 3 IN, NOMINAL BRANCH SIZE : 3 IN, END CONNECTION : BUTT WELD, SCHEDULE NUMBER : SCH-80, PRESSURE RATING : -, WALL THICKNESS : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A234 GRADE WPB, COATING/FINISH : -, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : C/W MILL CERTIFICATE, INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: KIT,VALVE,BUTTERFLY, MANUFACTURER: FLOWSEAL, ADDITIONAL DETAILS: TO SUIT 4 IN,CONSISTS OF SOFT SEAT,VITON O-RING,TFE PACKING,RETAINER RING SET SCREWS  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : KIT,VALVE,BUTTERFLY, MANUFACTURER REFERENCE NUMBER : -, MANUFACTURER : FLOWSEAL, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : TO SUIT 4 IN,CONSISTS OF SOFT SEAT,VITON O-RING,TFE PACKING,RETAINER RING SET SCREWS, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET:BRG,F/ GEN, CRITICAL PARTS CNTRL; MANUFACTURER: ; P/N: C 51533 00104  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET, MANUFACTURER REFERENCE NUMBER : C 51533 00104, MANUFACTURER : -, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : BRG,F/GEN,CRITICAL PARTS CNTRL, INTERNAL REMARKS : -


Input: I have material name like this  ===  CABLE RJ45 PATCH,20 RED CAT5E NUOVO PIGNONE PART NO/ORDERING NO : 336A4940DTP20RD MAIN EQUIPMENT = MARK-VIE, TEK-3000 BEKAPAI COMPRESSION PACKAGE FUNCTIONAL LOCATION (INTERNAL PURPOSE ONLY) = BKP/PP/GAS/COMP /TEK-3000 MANUFACTURED = GE THERMODYN  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CABLE, MANUFACTURER REFERENCE NUMBER : 336A4940DTP20RD, MANUFACTURER : THERMODYN FRAMATOME, SIZE : -, MATERIAL : -, EQUIPMENT NAME : COMPRESSION PACKAGE, ADDITIONAL DETAILS : RJ45 PATCH,20 RED CAT5E NUOVO PIGNONE NO:MAIN EQUIPMENT MARK-VIE FUNCTIONAL LOCATION (INTERNAL PURPOSE ONLY) BKP/PP/GAS/COMP, INTERNAL REMARKS : TAG NUMBER:TEK-3000 BEKAPAI


Input: I have material name like this  ===  SHOE: INNER TUBE, CHRISTENSEN 015422056 PARTS FOR CHRISTENSEN CORE BARREL SERIES 250-P, SIZE 4-3/4 X 2-5/8/6-3/4 X 4/ 8 X 5-1/4 * PART NO. DESCRIPTION * 015-442-056 INNER TUBE SHOE S,D,R,T,E FOR 8X5-1/4 MEC NO: 371133780 HS NO: 843143000  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SHOE,TUBE,INNER, MANUFACTURER REFERENCE NUMBER : 015-442-056, MANUFACTURER : CHRISTENSEN, SIZE : 4-3/4 X 2-5/8/6-3/4 X 4/ 8 X 5-1/4, MATERIAL : -, EQUIPMENT NAME : CORE BARREL SERIES 250-P| FOR 8X5-1/4, ADDITIONAL DETAILS : 015422056 PARTS ;  PART ; DESCRIPTION  ; S,D,R,T,E ;43143000, INTERNAL REMARKS : MEC NO: 371133780 HS NO: 843143000


Input: I have material name like this  ===  PIG; TYPE : RS7 ; FUNCTION : CRUDE OIL LINE ; BORE SIZE : 8" ; MATERIAL : FOAM ; PART NUMBER : 01-1472-0856-07 ; MANUFACTURER NAME : TDW ; ADDITIONAL INFO 1 : RED SKIN, SWAB  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PIG, MANUFACTURER REFERENCE NUMBER : 01-1472-0856-07, MANUFACTURER : TD WILLIAMSON, SIZE : 8 IN, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : TYPE:RS7,FUNCTION:CRUDE OIL LINE,BORE,MATERIAL:FOAM,RED SKIN,SWAB, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET:FLAT FOR INLET RECEIVING PUMP"GASKET:FLAT FOR INLET RECEIVING PUMP FOR INLET RECEIVING PUMP MODEL TG GP 360-150 MANUFACTURER: JOHNSON PUMP TAG NO: 156-P-01 A/B@@@  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET,FLAT, MANUFACTURER REFERENCE NUMBER : 3.94308.31 POS 1100, MANUFACTURER : JOHNSON PUMP, SIZE : -, MATERIAL : -, EQUIPMENT NAME : INLET RECEIVING PUMP, ADDITIONAL DETAILS : EQUIPMENT MODEL:TG-GP-360-150, INTERNAL REMARKS : TAG NUMBER:156-P-01 A/B


Input: I have material name like this  ===  SLEEVE: SHAFT, BXQ-2500/ 5N4X, BORGWARNER NPN BORGWARNER NPN SHAFT SLEEVE - ASSYFOR MODEL BXQ-2500/5N4X, MS. BWI-2709A  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SLEEVE,SHAFT, MANUFACTURER REFERENCE NUMBER : -, MANUFACTURER : BORG WARNER, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : MODEL:BXQ-2500/5N4X,BXQ-2500/ 5N4X,NPN,- ASSYFOR MODEL,MS. BWI-2709A, INTERNAL REMARKS : -


Input: I have material name like this  ===  SEAL,OIL CR.42478, DW-EMSCO,7602-213062;PART FOR : ROTARYCOUNTERSHAFT,DRILLING RIG;GB-250 THB;SERIAL : NO.90INTERLOPNO.7LN.2-0043;300 HP HOISTING RAITING,TRAILER, MOUNTED.;MFRS :CONTINENTAL EMSCO COMPANY- USA;CODENO : 6209-0350-00REV.2  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAL,OIL, MANUFACTURER REFERENCE NUMBER : 7602-213062, MANUFACTURER : CONTINENTAL EMSCO, SIZE : -, MATERIAL : -, EQUIPMENT NAME : DRILLING RIG, ADDITIONAL DETAILS : SERIAL NUMBER:90,CR.42478 DW,PART FOR:ROTARYCOUNTERSHAFT,DRILLING RIG,GB-250 THB:INTERLOPNO.7LN.2-0043,300 HP HOISTING RAITING,TRAILER MOUNTED,CODENO:6209-0350-00REV.2, INTERNAL REMARKS : -


Input: I have material name like this  ===  PUMP,OILPARTS FOR : ENGINE GAS & OIL FOR GODIVALIGHTWEIGHT PORTABLE FIRE PUMP ENGINEMAKE & TYPE OFPUMP : CONVENTRY CLIMAX F.W.P. SERIAL NO.6542MFR : CONVENTRY CLIMAX ENGINES LTD, ENGLAND.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PUMP,OIL, MANUFACTURER REFERENCE NUMBER : FW-2014, MANUFACTURER : COVENTRY CLIMEX, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE,GAS AND OIL, ADDITIONAL DETAILS : SERIAL NUMBER:6542,FOR GODIVALIGHTWEIGHT PORTABLE FIRE MAKE AND TYPE OF:F.W.P, INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: GASKET,ELBOW, MANUFACTURER REFERENCE NUMBER: 207827B  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET,ELBOW, MANUFACTURER REFERENCE NUMBER : 207827B, MANUFACTURER : -, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  BAND, STRAPPING; THICKNESS : 0.030" ; SIZE : 3/4" ; MATERIAL : 201 SS ; TYPE : STRAPPING BAND ; PART NUMBER : C206 ; MANUFACTURER NAME : BAND-IT BAND ; ADDITIONAL INFO 1 : 100FT/ROLL  ===  Please inform me parameter below:  TYPE  LENGTH  WIDTH  THICKNESS  MATERIAL  COLOR  TENSILE STRENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BAND, STRAPPING, TYPE : -, LENGTH : 100 FT (30 M)/ROLL, WIDTH : 3/4 IN, THICKNESS : 0.03 IN, MATERIAL : STAINLESS STEEL-201, COLOR : -, TENSILE STRENGTH : -, PART NUMBER : C206, MANUFACTURER : BAND-IT, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT, SWING, HEAVY HEX. N/W (U1"-8UNC X 145L), MATERIAL : SA193-B7 / SA194-2H (HDG)  ===  Please inform me parameter below:  TYPE  HEAD TYPE  SIZE  THREAD TYPE  UNDER HEAD LENGTH  LENGTH  MATERIAL  MATERIAL STANDARD  COATING/FINISH  NUT TYPE  THREAD COARSE PITCH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BOLT, SWING, TYPE : HEAVY HEXAGONAL, HEAD TYPE : -, SIZE : -, THREAD TYPE : -, UNDER HEAD LENGTH : -, LENGTH : -, MATERIAL : -, MATERIAL STANDARD : ASTM SA193-B7/SA194-2H (HDG), COATING/FINISH : -, NUT TYPE : -, THREAD COARSE PITCH : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : N/W (U1IN-8UNC X 145L), INTERNAL REMARKS : -


Input: I have material name like this  ===  PLUG,ELEC:STRGT,TEMPRA,2P,200-250VAC 32A; MANUFACTURER: LEGRAND; P/N: 0581 34  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  CONFIGURATION  NUMBER OF POLE  CONNECTION TYPE  MATERIAL  SIZE  NUMBER OF PHASE  NUMBER OF WIRE  HAZARDOUS AREA CLASSIFICATION  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PLUG, ELECTRICAL, TYPE : -, VOLTAGE RATING : 200 TO 250 VAC, CURRENT RATING : 32 A, CONFIGURATION : -, NUMBER OF POLE : 2, CONNECTION TYPE : -, MATERIAL : -, SIZE : -, NUMBER OF PHASE : -, NUMBER OF WIRE : -, HAZARDOUS AREA CLASSIFICATION : -, PART NUMBER : 0581 34, MANUFACTURER : LEGRAND, ADDITIONAL DETAILS : STRGT,TEMPRA, INTERNAL REMARKS : -


Input: I have material name like this  ===  CORE:MAG,HLS BRK,MAIN WINCH; MANUFACTURER: ARIET; P/N: PY3  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CORE,MAG, MANUFACTURER REFERENCE NUMBER : PY3, MANUFACTURER : ARIET, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : HLS BRK,MAIN WINCH, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE, CHECK CARTRDG TYPE(MODEL: L 5794 GSI ESM S/N.5283700432 / 5283700463 / S/N.5283700432 / 5283700463 /  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : VALVE,CHECK,CARTRDGE, MANUFACTURER REFERENCE NUMBER : 177053D, MANUFACTURER : WAUKESHA, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : EQUIPMENT MODEL:L-5794-GSI-ESM,SERIAL NUMBER:5283700432/5283700463, INTERNAL REMARKS : -


Input: I have material name like this  ===  HOSE,PLAIN P/N.3071160 THERMOSTAT HOUSING PART FOR : ENGINE CUMMINS NTC350 S/N.1020034 VIN.4V2R6BJFLU507338; MFCR : CUMMINS ENGINE CO. INCCOLUMBUS INDIANA - USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : HOSE,PLAIN, MANUFACTURER REFERENCE NUMBER : 3071160, MANUFACTURER : CUMMINS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : MODEL:NTC 350,SERIAL NUMBER:1020034 VIN.4V2R6BJFLU507338,PARTS FOR THERMOSTAT HOUSING, INTERNAL REMARKS : -


Input: I have material name like this  ===  BREAKER:CIRCUIT,6-10A, GV2ME143BREAKER: CIRCUIT, THERMAL MAGNETIC CIRCUIT BREAKER, 3 POLE/AC/50 OR 60 HZ, 6-10AMP MANUFACTURER; SCHNEIDER MPN. GV2ME143  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  FRAME RATING  INTERRUPT RATING  NUMBER OF POLE  SIZE  INSTANTANEOUS TRIP SETTING RNG  TERMINAL TYPE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BREAKER, CIRCUIT, TYPE : THERMAL MAGNETIC, CURRENT RATING : 6 TO 10 A, VOLTAGE RATING : -, FRAME RATING : -, INTERRUPT RATING : -, NUMBER OF POLE : 3, SIZE : -, INSTANTANEOUS TRIP SETTING RNG : -, TERMINAL TYPE : -, MOUNTING TYPE : -, PART NUMBER : GV2ME143, MANUFACTURER : SCHNEIDER, ADDITIONAL DETAILS : AC/50 OR 60 HZ, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE:SOLENOID,WSNFET8327B102SOLENOID VALVE MANUFACTUER: ASCO MPN: WSNFET8327B102  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  MATERIAL  MOUNTING TYPE  ELECTRICAL RATING  ENCLOSURE TYPE  ENCLOSURE RATING  TEMPERATURE RATING  COIL RATING  OPERATION  ORIFICE SIZE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, SOLENOID, TYPE : -, NOMINAL SIZE : -, END CONNECTION : -, PRESSURE RATING : -, MATERIAL : -, MOUNTING TYPE : -, ELECTRICAL RATING : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, TEMPERATURE RATING : -, COIL RATING : -, OPERATION : -, ORIFICE SIZE : -, MODEL NUMBER : -, PART NUMBER : WSNFET8327B102, MANUFACTURER : ASCO, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  BIMETAL ASHCROFTMODEL:50EI60E-150-XNH 0-200DEG. F, C/W. 316 SS THERMOWELL, MODEL : THERMOWELL, MODEL :  ===  Please inform me parameter below:  TYPE  MEASURING RANGE  GRADUATIONS  ACCURACY  DIAL SIZE  MOUNTING TYPE  STEM DIAMETER  CASE MATERIAL  STEM MATERIAL  STEM LENGTH  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: THERMOMETER, DIAL, TYPE : BIMETALLIC, MEASURING RANGE : 0 TO 200 DEG.F, GRADUATIONS : -, ACCURACY : -, DIAL SIZE : -, MOUNTING TYPE : -, STEM DIAMETER : -, CASE MATERIAL : -, STEM MATERIAL : -, STEM LENGTH : -, MANUFACTURER : ASHCROFT, PART NUMBER : -, ADDITIONAL DETAILS : MODEL: 50EI60E-150-XNH,C/W. STAINLESS STEEL-316 THERMOWELL, INTERNAL REMARKS : -


Input: I have material name like this  ===  SERVICE CABLE CLAMP PN:4630023/64 OVAL COMPRESS SLEEVE STAINLESS  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CLAMP,CABLE SERVICE, MANUFACTURER REFERENCE NUMBER : 4630023/64, MANUFACTURER : SHAND AND JURS, SIZE : -, MATERIAL : STAINLESS STEEL, EQUIPMENT NAME : -, ADDITIONAL DETAILS : OVAL COMPRESS SLEEVE, INTERNAL REMARKS : -


Input: I have material name like this  ===  GREASE, SPECIAL PURPOSE, STANDARD COUPLING, KOP FLEX INC, KSG-140Z, BLUE-GREEN, -40 TO 90 DEG F, 14 OZ/TUBE , GREASE GUN CARTRIDGE, NLGI GRADE 1, POLYETHYLENE THICKENER,1500 AT 100 DEG,F,SSU BASE OIL VISCOSITY,NR MOLYBEDENUM DISULFIDE,195 DEG F DROPPING P  ===  Please inform me parameter below:  APPLICATION  PRODUCT NAME  GRADE  BASE OIL TYPE  SOAP TYPE  SOLID LUBRICANT TYPE  COLOR  OPERATING TEMPERATURE  PACKAGING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GREASE, APPLICATION : SPECIAL PURPOSE,STANDARD COUPLING, PRODUCT NAME : KOP FLEX KSG, GRADE : NLGI 1, BASE OIL TYPE : MOLYBEDENUM DISULFIDE, SOAP TYPE : POLYETHELENE, SOLID LUBRICANT TYPE : -, COLOR : BLUE GREEN, OPERATING TEMPERATURE : -40 TO 90 DEG.F, PACKAGING : 14 OZ/TUBE, PART NUMBER : KSG-140Z, MANUFACTURER : KOP-FLEX, ADDITIONAL DETAILS : GUN CARTRIDGE,1500 AT 100 DEG,F,SSU BASE OIL VISCOSITY,195 DEG.F DROPPING P, INTERNAL REMARKS : -


Input: I have material name like this  ===  ROD; MATERIAL : CARBON STEEL ; PART NUMBER : 3T44VCN001BH2 ; MANUFACTURER NAME : DRESSER VALVE DIVISION ; ADDITIONAL INFO 1 : TIE,PART F/ SPRING RETURN SY ACTUATOR, MDL: ; ADDITIONAL INFO 2 : SY2053 SRC, MFR: DRESSER VALVE DIVISION, ; ADDITIONAL INFO 3 : AGX-SDV-1511, S/N. 120279, ORDER NO.:  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : ROD, MANUFACTURER REFERENCE NUMBER : 3T44VCN001BH2, MANUFACTURER : DRESSER, SIZE : -, MATERIAL : CARBON STEEL, EQUIPMENT NAME : SPRING RETURN ACTUATOR, ADDITIONAL DETAILS : EQUIPMENT MODEL:SY2053 SRC,SERIAL NUMBER:120279,TIE,AGX-SDV-1511, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET, PLATE, COVERPARTS FOR : COOPER BESSEMER ENGINET Y P E : JS-5GD.S I Z E : 13 X 16 H-430.SERIAL : NO.3876.MANUFACTURE : COOPER BESSEMER CO USA=====================================COMM. RANGE : (0003-3999)  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET,COVER,PLATE, MANUFACTURER REFERENCE NUMBER : GN.14-9KK, MANUFACTURER : COOPER BESSEMER, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : EQUIPMENT MODEL:JS-5GD,SERIAL NUMBER:3876,SIZE/DIMENSION:13X16 H-430,COMM.RANGE:(0003-3999), INTERNAL REMARKS : -


Input: I have material name like this  ===  BELT, V; TYPE : AUTOMOTIVE V-BELT ; BELT NUMBER : 17X1650LI ; OUTSIDE CIRCUMFERENCE : 1650MM ; TOP WIDTH : 17MM ; THICKNESS : 14MM ; MATERIAL : S09CHR ; MODEL : KRPF 5660 ; PART NUMBER : 17X1650LI ; MANUFACTURER NAME : KOBEI  ===  Please inform me parameter below:  TYPE  OUTSIDE DIAMETER  TOP WIDTH  MATERIAL  THICKNESS  NUMBER OF RIB  BELT NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BELT, V, TYPE : AUTOMOTIVE, OUTSIDE DIAMETER : -, TOP WIDTH : 17 MM, MATERIAL : S09CHR, THICKNESS : 14 MM, NUMBER OF RIB : -, BELT NUMBER : 17X1650LI, PART NUMBER : -, MANUFACTURER : KOBEI, ADDITIONAL DETAILS : OUTSIDE CIRCUMFERENCE : 1650MM,MODEL : KRPF 5660, INTERNAL REMARKS : -


Input: I have material name like this  ===  FITTINGITEM TYPE : PLUG-ROUND HEADSPECIFICATION : THREADEDSIZE : 2INSCHEDULE/RATING PRESSURE : #3000STANDARIZATION : A16.9/16.11MATERIAL : GALVANIZED ASTM A105  ===  Please inform me parameter below:  SIZE  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  HEAD TYPE  DIMENSIONAL STANDARD  THREAD LENGTH  THREAD TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PLUG, PIPE, SIZE : 2 IN, PRESSURE RATING : CLASS 3000, MATERIAL : -, MATERIAL STANDARD : ASTM A105, COATING/FINISH : -, HEAD TYPE : ROUND, DIMENSIONAL STANDARD : -, THREAD LENGTH : -, THREAD TYPE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : FITTING ITEM TYPE : PLUG SPECIFICATION : THREADED,STANDARIZATION : A16.9/16.11 GALVANIZED, INTERNAL REMARKS : -


Input: I have material name like this  ===  SHOE BRAKE,REAR RIGHT HANDLEMPN : 44066-90118PART FOR : WHEEL-TANK TRUCKMODEL/TYPE : CWA45MANUFACTURE : NISSAN  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SHOE,BRAKE, MANUFACTURER REFERENCE NUMBER : 44066-90118, MANUFACTURER : NISSAN, SIZE : -, MATERIAL : -, EQUIPMENT NAME : WHEEL-TANK TRUCK, ADDITIONAL DETAILS : EQUIPMENT MODEL:CWA45,REAR RIGHT HANDLEMPN, INTERNAL REMARKS : -


Input: I have material name like this  ===  LAMP HOLDER TYPE : - P/N : 601 80 MODEL : - RATED VOLTAGE : 750VAC RATED CURRENT : 16A, LAMP BASE : E40 TERMINAL : SCREW MATERIAL : DOUBLE PORCELAIN APPLICATION : LEGRAND ELECTRICAL MATERIALS BRAND : LEGRAND  ===  Please inform me parameter below:  TYPE  LAMP TYPE  POWER RATING  VOLTAGE RATING  LAMP BASE  MATERIAL  MATERIAL STANDARD  SIZE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: HOLDER, LAMP, TYPE : -, LAMP TYPE : -, POWER RATING : -, VOLTAGE RATING : -, LAMP BASE : E40, MATERIAL : -, MATERIAL STANDARD : -, SIZE : -, MOUNTING TYPE : -, PART NUMBER : 601 80, MANUFACTURER : LEGRAND, ADDITIONAL DETAILS : LAMP HOLDER TYPE: - MODEL: - RATED VOLTAGE: 750VAC RATED CURRENT: 16A,LAMP BASE: TERMINAL: SCREW MATERIAL: DOUBLE PORCELAIN APPLICATION: ELECTRICAL MATERIALS, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET, SPIRAL WOUND, 316L STAINLESS STEEL WINDING, GRAPHITE FILLER, 316L STAINLESS STL INNER RING, CARBON STEEL OUTER RING, 900 LB, ASME B16.20, CADMIUM PLATED, 14 IN  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  GASKET THICKNESS  WINDING MATERIAL  FILLER MATERIAL  INNER RING MATERIAL  CENTER RING MATERIAL  PRESSURE RATING  INNER RING THICKNESS  CENTER RING THICKNESS  WINDING MATERIAL STANDARD  INNER RING MATERIAL STANDARD  CENTER RING MATERIAL STANDARD  SERVICE  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GASKET, SPIRAL WOUND, TYPE : -, NOMINAL SIZE : 14 IN, GASKET THICKNESS : -, WINDING MATERIAL : STAINLESS STEEL-316L, FILLER MATERIAL : GRAPHITE, INNER RING MATERIAL : STAINLESS STEEL-316L, CENTER RING MATERIAL : CARBON STEEL, PRESSURE RATING : CLASS 900, INNER RING THICKNESS : -, CENTER RING THICKNESS : -, WINDING MATERIAL STANDARD : -, INNER RING MATERIAL STANDARD : -, CENTER RING MATERIAL STANDARD : -, SERVICE : -, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : ASME B16.20,CADMIUM PLATED, INTERNAL REMARKS : -


Input: I have material name like this  ===  SEAL KIT, CP2 HIGH TEMPERATURE, CP/X-035-130B/XX, P/N : WCPV035130, MFCR: ROTORK  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAL, MANUFACTURER REFERENCE NUMBER : WCPV035130, MANUFACTURER : ROTORK, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : CP2 HIGH TEMPERATURE, CP/X-035-130B/XX, INTERNAL REMARKS : -


Input: I have material name like this  ===  BEND, U, US FILTER, 10781, FOR HYPOCHLORITE GENERATOR, MK2M  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : BEND,U, MANUFACTURER REFERENCE NUMBER : 10781, MANUFACTURER : USFILTER, SIZE : -, MATERIAL : -, EQUIPMENT NAME : HYPOCHLORITE GENERATOR, ADDITIONAL DETAILS : S FILTER FOR MK2M, INTERNAL REMARKS : -


Input: I have material name like this  ===  TRANSMITTER:TEMPERATURE 0-100 DEG C"TRANSMITTER:TEMPERATURE 0-100 DEG C FACTORY CAL: PT100/4 WIRE/0 TO 100 DEG C SUPPLY: 12.0 ~ 42.4 VDC OUTPUT: 4 ~ 20 MA MANUFACTUER: ROSEMOUNT MPN: 3144PD2A1EIM5T1C4Q4 @@@  ===  Please inform me parameter below:  TEMPERATURE RANGE  OUTPUT RATING  INPUT TYPE  POWER SUPPLY  CONNECTION TYPE  MOUNTING TYPE  ACCURACY  MATERIAL  ENCLOSURE TYPE  ENCLOSURE RATING  SIZE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: TRANSMITTER, TEMPERATURE, TEMPERATURE RANGE : 0 TO 100 DEG.C, OUTPUT RATING : 4 TO 20 MA, INPUT TYPE : -, POWER SUPPLY : 12 TO 42.4 VDC, CONNECTION TYPE : -, MOUNTING TYPE : -, ACCURACY : -, MATERIAL : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, SIZE : -, MODEL NUMBER : -, PART NUMBER : 3144PD2A1EIM5T1C4Q4, MANUFACTURER : ROSEMOUNT, ADDITIONAL DETAILS : FACTORY CAL: PT100/4 WIRE, INTERNAL REMARKS : -


Input: I have material name like this  ===  CLIP, WIRE ROPE, MCMASTER CARR SUPPLY CO, 3465T41, FORGED STEEL, 1 1/8 IN  ===  Please inform me parameter below:  TYPE  LOAD RATING  END FITTING  MATERIAL  ROPE DIAMETER  ROPE STRUCTURE  SLING LENGTH  EYE TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CLIP, WIRE ROPE, TYPE : -, LOAD RATING : -, END FITTING : -, MATERIAL : FORGED STEEL, ROPE DIAMETER : 1-1/8 IN, ROPE STRUCTURE : -, SLING LENGTH : -, EYE TYPE : -, PART NUMBER : 3465T41, MANUFACTURER : MCMASTER-CARR, ADDITIONAL DETAILS : CLIP,WIRE ROPE, INTERNAL REMARKS : -


Input: I have material name like this  ===  STUD, FRESH WATER PUMP BODY, 5,1040; PARTS FOR : DETROIT DIESEL ENGINE,TYPE : 6-71 IN LINE, MFCR : GENERAL MOTORS CORP. DETROIT DIESEL ENGINEDIV. DETROIT, MICHIGAN - USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : STUD,BODY, MANUFACTURER REFERENCE NUMBER : 51040, MANUFACTURER : GENERAL MOTORS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINES,DIESEL, ADDITIONAL DETAILS : MODEL:IN-LINE 71/6-71,FRESH WATER PUMP, INTERNAL REMARKS : -


Input: I have material name like this  ===  STUD; TYPE : TYPE 180 ; SIZE : 7/8" ; MATERIAL : FLUOROCARBON COATED ; SPECIFICATION : A193 ; GRADE : B7 ; ADDITIONAL INFO 1 : C/W NUT ; ADDITIONAL INFO 2 : CLASS HH,NUT SPECIFICATION: A194-2H  ===  Please inform me parameter below:  SIZE  LENGTH  MATERIAL  STUD MATERIAL STANDARD  NUT MATERIAL STANDARD  COATING/FINISH  STUD DESIGN STANDARD  NUT DESIGN STANDARD  THREAD CLASS SYMBOL(BOLT/NUT)  THREAD TYPE  NUT TYPE  NUMBER OF NUT(S) PER STUD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD, WITH NUT, SIZE : 7/8 IN, LENGTH : -, MATERIAL : -, STUD MATERIAL STANDARD : ASTM A193 GRADE B7, NUT MATERIAL STANDARD : ASTM A194 GRADE 2H, COATING/FINISH : FLUOROCARBON, STUD DESIGN STANDARD : -, NUT DESIGN STANDARD : -, THREAD CLASS SYMBOL(BOLT/NUT) : -, THREAD TYPE : -, NUT TYPE : -, NUMBER OF NUT(S) PER STUD : 2 HEX NUTS, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : TYPE 180,CLASS HH, INTERNAL REMARKS : -


Input: I have material name like this  ===  HIGHBAND 10 DISCONNECTMODULE WITH JRP10 (10 EA/PACK)LSA-PLUS+é-« , MFG.: KRONE LSA-PLUS+é-« , MFG.: KRONE  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : MODULE,HIGHBAND 10 DISCONNECT, MANUFACTURER REFERENCE NUMBER : 6468 5 061-00Y, MANUFACTURER : KRONE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : WITH JRP10 (10 EA/PACK)LSA-PLUS++Ë--½,LSA-PLUS, INTERNAL REMARKS : -


Input: I have material name like this  ===  GEAR-SHAFT,UPPER ASSYMANUFACTURE : TMCOMODEL/TYPE : ORIFICE FITTINGITEM : 15BSIZE DUAL CHAMBER : 8"PRESSURE RATING : ANSI 300(740 PSI CWP)OTHER : C/W CERTIFICATE  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GEARSHAFT ASSEMBLY,UPPER, MANUFACTURER REFERENCE NUMBER : IT.15B, MANUFACTURER : TMCO, SIZE : 8 IN, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : EQUIPMENT MODEL:TYPE : ORIFICE FITTING,EQUIPMENT RATING : RATING : ANSI 300(740 PSI CWP); DUAL CHAMBER OTHER : C/W CERTIFICATE, INTERNAL REMARKS : -


Input: I have material name like this  ===  DISCH, MODEL: 5HOS4S/N: 5HF141 / 5HF142 TAG NO:185-PK-102 / 195-PK-102TAG NO:185-PK-102 / 195-PK-102  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : VALVE, MANUFACTURER REFERENCE NUMBER : MLH56040LG2, MANUFACTURER : DRESSER-RAND, SIZE : -, MATERIAL : -, EQUIPMENT NAME : COMPRESSOR, ADDITIONAL DETAILS : EQUIPMENT MODEL:5HOS4,SERIAL NUMBER:5HF141/5HF142,67PF, INTERNAL REMARKS : TAG NUMBER:185-PK-102/195-PK-102,185-PK-102/195-PK-102


Input: I have material name like this  ===  CIRC. BREAKER: 3PL, 125AF/02AT , 2A, 600VAC, 250VDC CIRC.BREAKER: 3POLE, 2 AMP 125AF/2AT, 600VAC, 250VDC INSTATENOUS TRIP (MOTOR TRIP PROTECTED) NON-INTERCHANGEABLE TRIP, CAT.# ED63A002, SIEMENS MEC NO: 230317005 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  FRAME RATING  INTERRUPT RATING  NUMBER OF POLE  SIZE  INSTANTANEOUS TRIP SETTING RNG  TERMINAL TYPE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BREAKER, CIRCUIT, TYPE : -, CURRENT RATING : 2 A, VOLTAGE RATING : 600 VAC/250 VDC, FRAME RATING : 125 AF/02 AT, INTERRUPT RATING : -, NUMBER OF POLE : 3, SIZE : -, INSTANTANEOUS TRIP SETTING RNG : (MOTOR TRIP PROTECTED) NON-INTERCHANGEABLE TRIP, TERMINAL TYPE : -, MOUNTING TYPE : -, PART NUMBER : ED63A002, MANUFACTURER : SIEMENS, ADDITIONAL DETAILS : 02AT, INTERNAL REMARKS : MEC NO: 230317005 HS NO: 000000000


Input: I have material name like this  ===  STRIP, COPPER TEST, STANHOPE SETA LTD, 11550-0, 75 X 12.5 X 2.4 MM, PAC OF 30, W/ MATERIAL CERTIFICATE  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : STRIP,COPPER TEST, MANUFACTURER REFERENCE NUMBER : 11550-0, MANUFACTURER : STANHOPE SETA, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : 75 X 12.5 X 2.4 MM, PAC OF 30, W/MATERIAL CERTIFICATE, INTERNAL REMARKS : -


Input: I have material name like this  ===  MOTOR, ELECTRIC, ALTERNATING CURRENT, INSULATION F, US ELECTRICAL MOTORS, B0697065607001R1, 460 V, 60 HZ, 3560 RPM, 25 HP, 3 PH, FRAME 284TS, 29.5 AMP, TYPE TCE , SERVICE FACTOR 1.15  ===  Please inform me parameter below:  TYPE  POWER RATING  NUMBER OF PHASE  VOLTAGE RATING  CURRENT RATING  FREQUENCY  NUMBER OF POLE  SPEED/RPM  INSULATION CLASS  FRAME SIZE  MOUNTING TYPE  COOLING METHOD  ROTATION DIRECTION  INGRESS PROTECTION  SERVICE FACTOR  ENCLOSURE TYPE  ENCLOSURE RATING  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: MOTOR, ELECTRICAL, TYPE : ALTERNATING CURRENT, POWER RATING : 25 HP, NUMBER OF PHASE : 3, VOLTAGE RATING : 460 V, CURRENT RATING : 29.5 A, FREQUENCY : 60 HZ, NUMBER OF POLE : -, SPEED/RPM : 3560, INSULATION CLASS : F, FRAME SIZE : 284TS, MOUNTING TYPE : -, COOLING METHOD : -, ROTATION DIRECTION : -, INGRESS PROTECTION : -, SERVICE FACTOR : 1.15, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, MODEL NUMBER : -, PART NUMBER : B0697065607001R1, MANUFACTURER : US ELECTRIC MOTOR, ADDITIONAL DETAILS : TYPE TCE, INTERNAL REMARKS : -


Input: I have material name like this  ===  PLUG,PIPE, SIZE: 1-5/8 IN, MATERIAL: STAINLESS STEEL, MATERIAL STANDARD: ASTM A182 GRADE F304L, HEAD TYPE: HEXAGONAL, THREAD LENGTH: 42.50 MM, PART NUMBER: 1592-2610-01-J01, MANUFACTURER: KELVION, ADDITIONAL DETAILS: THREADED  ===  Please inform me parameter below:  SIZE  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  HEAD TYPE  DIMENSIONAL STANDARD  THREAD LENGTH  THREAD TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PLUG, PIPE, SIZE : 1-5/8 IN, PRESSURE RATING : -, MATERIAL : STAINLESS STEEL, MATERIAL STANDARD : ASTM A182 GRADE F304L, COATING/FINISH : -, HEAD TYPE : HEXAGONAL, DIMENSIONAL STANDARD : -, THREAD LENGTH : 42.50 MM, THREAD TYPE : -, PART NUMBER : 1592-2610-01-J01, MANUFACTURER : KELVION, ADDITIONAL DETAILS : THREADED, INTERNAL REMARKS : -


Input: I have material name like this  ===  PRIMER; TYPE : PRIMER AND CEMENT ; ADDITIONAL INFO 1 : CPVC REF. TO MCMASTER-CARR CATALOGUE 109, PAGE: ; ADDITIONAL INFO 2 : 59  ===  Please inform me parameter below:  TYPE  COLOR  TEMPERATURE RATING  CONTAINER TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PRIMER, TYPE : -, COLOR : -, TEMPERATURE RATING : -, CONTAINER TYPE : -, PART NUMBER : -, MANUFACTURER : MCMASTER-CARR, ADDITIONAL DETAILS : TYPE: PRIMER AND CEMENT,CPVC REF. TO CARR CATALOGUE 109,PAGE:,59, INTERNAL REMARKS : -


Input: I have material name like this  ===  LCDT SERIESMANUFACTURE : FRANK MURPHYPART NUMBER : LCDT-PS-120/24/12  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : LCDT,SERIES, MANUFACTURER REFERENCE NUMBER : LCDT-PS-120/24/12, MANUFACTURER : MURPHY, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  FUSE: ELECTRICAL TYPE FAST ACTING AMPERAGE 1-1/2A,VOLTAGE 600VAC,INTERRUPTING RATING 100KA,CONNECTION FUSE HOLDER,CARTRIDGE FIBERGLASS,SIZE 0.406IN DIA X 1.5IN LG  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  INTERRUPT RATING  CLASS  DIMENSION  MATERIAL  TERMINAL TYPE  RESPONSE TIME  THERMAL CAPACITY  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FUSE, TYPE : CARTRIDGE,FAST ACTING, CURRENT RATING : 1.5 A, VOLTAGE RATING : 600 VAC, INTERRUPT RATING : 100 KA, CLASS : -, DIMENSION : 0.406 IN, MATERIAL : FIBER GLASS, TERMINAL TYPE : -, RESPONSE TIME : -, THERMAL CAPACITY : -, MODEL NUMBER : -, PART NUMBER : KLK 1-1/2, MANUFACTURER : LITTELFUSE, ADDITIONAL DETAILS : ELECTRICAL CONNECTION FUSE HOLDER,1.5IN LG, INTERNAL REMARKS : -


Input: I have material name like this  ===  OUTLET BODY: THD RIGID CONDUIT TYPE LBD, 3 FERALOY OUTLET BODY, THREADE RIGID CONDUIT TYPE LBD 3 FERALOY CROUSE HINDS LBD 8800 MEC NO: 249964581 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  MATERIAL  CONNECTION  CONDUIT SIZE  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FITTING, CONDUIT, TYPE : OUTLET LBD, MATERIAL : FERALOY, CONNECTION : THREADED, CONDUIT SIZE : -, MANUFACTURER : CROUSE-HINDS, PART NUMBER : 8800, ADDITIONAL DETAILS : BODY: RIGID C,3, INTERNAL REMARKS : MEC NO: 249964581 HS NO: 000000000


Input: I have material name like this  ===  PLUG, 1/4" PIPE, GM, P/N 5167552 ; PARTS FOR GM DIESEL ENGINE .  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PLUG,PIPE, MANUFACTURER REFERENCE NUMBER : 5167552, MANUFACTURER : GENERAL MOTORS, SIZE : 1/4 IN, MATERIAL : -, EQUIPMENT NAME : ENGINES,DIESEL, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  BREAKER, GE CO, GG13N1, 1250 A, ENTILIGUARD, 3 POLE  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  FRAME RATING  INTERRUPT RATING  NUMBER OF POLE  SIZE  INSTANTANEOUS TRIP SETTING RNG  TERMINAL TYPE  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BREAKER, CIRCUIT, TYPE : -, CURRENT RATING : 1250 A, VOLTAGE RATING : -, FRAME RATING : -, INTERRUPT RATING : -, NUMBER OF POLE : 3, SIZE : -, INSTANTANEOUS TRIP SETTING RNG : -, TERMINAL TYPE : -, MOUNTING TYPE : -, PART NUMBER : GG13N1, MANUFACTURER : GENERAL ELECTRIC, ADDITIONAL DETAILS : ENTILIGUARD, INTERNAL REMARKS : -


Input: I have material name like this  ===  SUPPORT, BOTTOM, (CARBON STEEL), ITEM 16 FOR FLUX AIR PRESSURE PUMP TYPE 416, 25 BAR. 1500 L/H TATUN LUBE OIL TRANSFER PUMP.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SUPPORT,BOTTOM, MANUFACTURER REFERENCE NUMBER : 415-02-015, MANUFACTURER : FLUX-GERATE, SIZE : -, MATERIAL : CARBON STEEL, EQUIPMENT NAME : AIR PRESSURE PUMP, ADDITIONAL DETAILS : MODEL:416,POSITION NUMBER:IT 16,25 BAR,1500 L/H TATUN LUBE OIL TRANSFER PUMP, INTERNAL REMARKS : -


Input: I have material name like this  ===  BARREL,WORKING,HEAVY WALL, "TP", FOR SOFT PACKED PLUNGER TUBING PUMP,TUBING SIZE 3-1/2" X 2-3/4" PUMP BORE, 8 FT LENGTH, CHROME PLATED CARBONSTEEL, P/N: 7-235N8; API NO. B15-275, PART FOR OIL WELL PUMP. MFCR:HARBISON FISCHER .  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : BARREL,WORKING,HEAVY WALL, MANUFACTURER REFERENCE NUMBER : 7-235N8, MANUFACTURER : HARBISON-FISCHER, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : TP, FOR SOFT PACKED PLUNGER TUBING PUMP,TUBING SIZE 3-1/2 IN X 2-3/4 IN PUMP BORE, 8 FT LENGTH, CHROME PLATED CARBONSTEEL, P/N: ; API NO. B15-275, INTERNAL REMARKS : -


Input: I have material name like this  ===  REGULATOR FILTER AIR ND1/2IN NPT AISI 316 PRESSURE RANGE MAX 10 BAR<(> <)> TEMPERATURE RANGE -20#C/+180#C<(> <)> VENDOR: CCI VENDOR PN: 107566.@@@  ===  Please inform me parameter below:  TYPE  FILTER RATING  PORT SIZE/CONNECTION  PRESSURE RATING  SIZE  FLOW RATING  TEMPERATURE RATING  FILTER BOWL CAPACITY  OPERATOR TYPE  ELEMENT MATERIAL  FILTER BOWL MATERIAL  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: REGULATOR, FILTER, TYPE : -, FILTER RATING : -, PORT SIZE/CONNECTION : 1/2 IN NPT, PRESSURE RATING : MAX: 10 BAR, SIZE : -, FLOW RATING : -, TEMPERATURE RATING : -20 TO 180 DEG.C, FILTER BOWL CAPACITY : -, OPERATOR TYPE : -, ELEMENT MATERIAL : -, FILTER BOWL MATERIAL : -, MODEL NUMBER : -, PART NUMBER : 107566, MANUFACTURER : BIFOLD, ADDITIONAL DETAILS : AIR ND,AISI 316,VENDOR: CCI VENDOR, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT,MACHINE,M25X200MM,ZINC BICHROMATE PLATED,A325,NUT AND WASHER,AS PER MHK-COMP-SPE-EP-STR-201  ===  Please inform me parameter below:  TYPE  HEAD TYPE  SIZE  THREAD TYPE  UNDER HEAD LENGTH  LENGTH  MATERIAL  MATERIAL STANDARD  COATING/FINISH  TENSILE STRENGTH  DRIVE TYPE  THREAD DIRECTION  HEAD SIZE  LOAD RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BOLT, MACHINE, TYPE : -, HEAD TYPE : -, SIZE : M25, THREAD TYPE : -, UNDER HEAD LENGTH : -, LENGTH : 200 MM, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A325, COATING/FINISH : ZINC BICHROMATE PLATED, TENSILE STRENGTH : -, DRIVE TYPE : -, THREAD DIRECTION : -, HEAD SIZE : -, LOAD RATING : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : C/W NUT AND WASHER, INTERNAL REMARKS : AS PER MHK-COMP-SPE-EP- STR- 0201


Input: I have material name like this  ===  VALVE PLUG PART NUMBER : 040000-292-596-0000 MATERIAL : 316 SS W HARD FACE CV : 11 ORIFICE LINE : 3/4 INCH APPLICABLE FOR CONTROL VALVE 21000 SERIES 1 INCH AND 1.1/2 INCH 900 RTJ MANUFACTURED BY MASONEILAN  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PLUG,VALVE, MANUFACTURER REFERENCE NUMBER : 040000-292-596-0000, MANUFACTURER : MASONEILAN, SIZE : -, MATERIAL : STAINLESS STEEL-316, EQUIPMENT NAME : CONTROL VALVE, ADDITIONAL DETAILS : MODEL:21000-SERIES,W HARD FACE CV:11 ORIFICE LINE:3/4 IN APPLICABLE,1 IN AND 1.1/2 IN 900 RTJ, INTERNAL REMARKS : -


Input: I have material name like this  ===  ROV TOOL, OVERRIDE JACK, MQC, MK2, ASSEMBLY; PART NUMBERS: 7604322; MANUFACTURER: FMC TECHNOLOGIES  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : ROV TOOL,OVERRIDE JACK, MANUFACTURER REFERENCE NUMBER : 7604322, MANUFACTURER : FMC, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : MQC,MK2,ASSEMBLY, INTERNAL REMARKS : -


Input: I have material name like this  ===  SIZE: 3/8"-16, HEX (FULL) NUTSGRADE 8 ZINC & YELLOW CHROMATEPLATED STEEL, CAT.NO:94895A031(MCMASTER-CARR CATALOG-113 (MCMASTER-CARR CATALOG-113  ===  Please inform me parameter below:  TYPE  SIZE  THREAD TYPE  MATERIAL  MATERIAL STANDARD  COATING/FINISH  DESIGN STANDARD  CHAMFERING  THREAD COARSE PITCH  DIMENSIONAL TOLERANCE  NUT THREAD TOLERANCE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NUT, HEXAGONAL HEAD, TYPE : -, SIZE : 3/8 IN -16, THREAD TYPE : UNC, MATERIAL : ZINC AND YELLOW CHROMATE PLATED STEEL, MATERIAL STANDARD : GRADE 8, COATING/FINISH : -, DESIGN STANDARD : -, CHAMFERING : -, THREAD COARSE PITCH : -, DIMENSIONAL TOLERANCE : -, NUT THREAD TOLERANCE : -, PART NUMBER : 94895A031, MANUFACTURER : MCMASTER-CARR, ADDITIONAL DETAILS : SIZE:,HEX (FULL) NUTS,(CATALOG-113), INTERNAL REMARKS : -


Input: I have material name like this  ===  ASSEMBLY, SENSOR, CO2, TELEDYNE ANALYTICAL INSTRUMENT, D-72894A, C/W MTG SUPPORT AND CABLES, F/ CO2 ANALYZER MODEL 7320  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SENSOR ASSEMBLY, MANUFACTURER REFERENCE NUMBER : D-72894A, MANUFACTURER : TELEDYNE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : CO2 ANALYZER, ADDITIONAL DETAILS : EQUIPMENT MODEL:7320,ANALYTICAL INSTRUMENT C/W MTG SUPPORT AND CABLES F, INTERNAL REMARKS : -


Input: I have material name like this  ===  SLEEVE, HYDRO-PNEUMATIC PRESSURE SWITCH, P/N : 2250-0106, PART FOR BOPCONTROL UNIT KOOMEY TYPE 80.  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  POWER RATING  FREQUENCY  MOUNTING TYPE  TEMPERATURE RATING  ACTION  ENCLOSURE TYPE  ENCLOSURE RATING  CONTACT CONFIGURATION  PROCESS CONNECTION  NUMBER OF POLE  MEASURING RANGE  MATERIAL  DIMENSION  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SWITCH, PRESSURE, TYPE : HYDRO-PNEUMATIC, VOLTAGE RATING : -, CURRENT RATING : -, POWER RATING : -, FREQUENCY : -, MOUNTING TYPE : -, TEMPERATURE RATING : -, ACTION : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, CONTACT CONFIGURATION : -, PROCESS CONNECTION : -, NUMBER OF POLE : -, MEASURING RANGE : -, MATERIAL : -, DIMENSION : -, MODEL NUMBER : -, PART NUMBER : 2250-0106, MANUFACTURER : -, ADDITIONAL DETAILS : SLEEVE,PART FOR BOPCONTROL UNIT KOOMEY TYPE 80, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT SET, 1 " X 159 MM, RAISED FACE, PRESSURE RATING 300 LB, STUD BOLT  ===  Please inform me parameter below:  DESIGN STANDARD  MATERIAL  MATERIAL STANDARD  COATING/FINISH  THREAD CLASS SYMBOL  THREAD TYPE  SIZE  LENGTH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: STUD BOLT, WITHOUT NUT, DESIGN STANDARD : -, MATERIAL : -, MATERIAL STANDARD : -, COATING/FINISH : -, THREAD CLASS SYMBOL : -, THREAD TYPE : -, SIZE : 1 IN X 159 MM, LENGTH : 159 MM, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : BOLT SET,RAISED FACE,PRESSURE RATING 300 LB,STUD BOLT, INTERNAL REMARKS : -


Input: I have material name like this  ===  CONDUCTOR PIPE 36" X 1.500" WALL D.S.A.W. RANGE III, GRADE L390 (56), DSAW,E-60/MT BOX X DAVIS LYNCH TYPE 500 PVTS SHOE JOINT C/W PROT & HANDLING INSTALL TWO (2) BOLT ON PAD EYEMOUNTS EQUIPMENT AND ONE (1) LIFT EYE MOUNT 3FT FROM BOX WELDMENT AND ONE (1) L  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CONDUCTOR,PIPE, MANUFACTURER REFERENCE NUMBER : 323DRI000014MS, MANUFACTURER : DRILL-QUIP, SIZE : 36 X 1.5 IN, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : WALL D.S.A.W. RANGE III, GRADE L390 (56), DSAW,E-60/MT BOX X DAVIS LYNCH TYPE 500 PVTS SHOE JOINT C/W PROT AND HANDLING INSTALL TWO (2) BOLT ON PAD EYEMOUNTS EQUIPMENT AND ONE (1) LIFT EYE MOUNT 3FT FROM BOX WELDMENT AND ONE (1) L, INTERNAL REMARKS : -


Input: I have material name like this  ===  CASE, ADAPTOR TRANF 4 WDPARTS FOR :-PICKUP TYPE K10,K20.-PICKUP & SUBURBAN TYPE 10-35.-AMBULANCE TYPE C10.-CARRY ALL TYPE K10.-SEDAN TYPE C10.MANUFACTURER:GM CORP USA=============================  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CASE,ADAPTOR TRANF, MANUFACTURER REFERENCE NUMBER : 335345, MANUFACTURER : GENERAL MOTORS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : PICKUP, ADDITIONAL DETAILS : EQUIPMENT MODEL:K10,K20,4 WDPARTS ; :-PICKUP ; C10.MANUFACTURERPICKUP AND SUBURBAN TYPE 10-35.-AMBULANCE TYPE C10.-CARRY ALL TYPE K10.-SEDAN TYPE C10, INTERNAL REMARKS : -


Input: I have material name like this  ===  WASHER (.135" THICK ), P/N.10A12434; PART FOR : ENGINE MM ( MINNEAPOLISMOLINE) MODEL : HD800A-6A; S/N : 34901430 AND AFTER; MFCR : HOPKINS,MINNESOTA - USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : WASHER, MANUFACTURER REFERENCE NUMBER : 10A12434, MANUFACTURER : MINNEAPOLIS MOLINE, SIZE : THK: 135 IN, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : MODEL : HD800A-6A; S/N : 34901430 AND AFTER, INTERNAL REMARKS : -


Input: I have material name like this  ===  FRONT BEARING SHIMS (SET)(*) MODEL: CB 225 S/N: 04-10412-103-4 S/N: 04-10412-103-4  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SHIMS,BEARING,FRONT, MANUFACTURER REFERENCE NUMBER : 103-73-1-2506-07, MANUFACTURER : NASH-ELMO, SIZE : -, MATERIAL : -, EQUIPMENT NAME : VANE COMPRESSOR, ADDITIONAL DETAILS : EQUIPMENT MODEL:CB 225,SERIAL NUMBER:04-10412-103-4, INTERNAL REMARKS : -


Input: I have material name like this  ===  GASKET FLAT RECT, P/N. ZB-1062PN.B1062PART FOR : GAS ENGINEMODEL/TYPE : DPC-360/HORIZONTALENGINE BORE : 15 IN STROKE 16 INSERIAL NUMBER : 82295 - 82298MANUFACTURE : AJAX IRON WORKS, CORRY - USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : GASKET,FLAT, MANUFACTURER REFERENCE NUMBER : ZB-1062, MANUFACTURER : AJAX, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINES,GAS, ADDITIONAL DETAILS : EQUIPMENT MODEL:DPC-360/HORIZONTAL,SERIAL NUMBER:82295-82298,SIZE/DIMENSION:BORE:15XSTROKE 16 IN, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELBOW, PIPE; SIZE : 3" ; DEGREE : 90 DEG ; MATERIAL : A 234 WPB ; ADDITIONAL INFO 1 : SCH-80, LR, BW  ===  Please inform me parameter below:  TYPE  SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  ANGLE  RADIUS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELBOW, PIPE, TYPE : -, SIZE : 3 IN, END CONNECTION : BUTT WELD, SCHEDULE NUMBER : SCH-80, PRESSURE RATING : -, WALL THICKNESS : -, ANGLE : 90 DEGREE, RADIUS : LONG RADIUS, MATERIAL : -, MATERIAL STANDARD : ASTM A234 GRADE WPB, COATING/FINISH : -, MANUFACTURING PROCESS : -, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  COUPLING,1-7/8" SHAFT DIA, 1390102COUPLING, SIZE: 1-7/8" SHAFT DIA TO 14T, PARTS FOR TEG CIRCULATION PUMP, ROTORTECH GS3300 MANUFACTURER: ROTOR TECH MPN. 1390102 TAG NO. 136-P-10A. *DETAILS DRAWING AS ATTACHED SUPPORTING DOCUMENT REQUIRED: - CERTIFICATE OF ORIGIN FROM MANUFACTURER SPECIFI  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : COUPLING, MANUFACTURER REFERENCE NUMBER : 1390102, MANUFACTURER : ROTOR TECH, SIZE : DIA: 1-7/8 IN, MATERIAL : -, EQUIPMENT NAME : TEG CIRCULATION PUMP, ADDITIONAL DETAILS : ROTORTECH GS3300,DETAILS DRAWING AS ATTACHED SUPPORTING DOCUMENT REQUIRED:-CERTIFICATE OF ORIGIN FROM MANUFACTURER SPECIFI, INTERNAL REMARKS : TAG NUMBER:136-P-10A


Input: I have material name like this  ===  O-RING: K202RAD, MITSUBISHI MH035124 MITSUBISHI SPARES * PART NO. DESCRIPTION * MH-035124 O-RING FOR MOD. K202 MEC NO: 873650120 HS NO: 401693000  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : O-RING, MANUFACTURER REFERENCE NUMBER : MH-035124, MANUFACTURER : MITSUBISHI, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : EQUIPMENT MODEL:K202,K202RAD, INTERNAL REMARKS : HULL NUMBER:HS NO:401693000,MEC NO:873650120


Input: I have material name like this  ===  O-RING RADIAL SEAL(497H), GOULD PUMP INC., P/N : CO2495A376-5308, SPARE PART FOR GOULD PUMP NM3196MTX, SIZE : 2 X 3-10, S/N : E765D091 AND E765D092  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : O-RING,SEAL,THRUST,RADIAL, MANUFACTURER REFERENCE NUMBER : CO2495A376-5308, MANUFACTURER : GOULDS PUMPS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : PUMP, ADDITIONAL DETAILS : EQUIPMENT MODEL:NM3196MTX,SERIAL NUMBER:E765D091 AND E765D092,POSITION NUMBER:497H,SIZE/DIMENSION::2X3-10, INTERNAL REMARKS : -


Input: I have material name like this  ===  PACKING ARRANGEMENT: PTFEV-RING PACKING MFG.: FISHER MFG.: FISHER  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : WIPER,UPPER,PACKING ARRANGEMENT, MANUFACTURER REFERENCE NUMBER : 1J873006332, MANUFACTURER : FISHER, SIZE : 16 X 12, MATERIAL : FELT SAE F3, EQUIPMENT NAME : CONTROL VALVE, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  FUSE:GENERAL PURPOSE FUSIBLE,CLASS GG,2,; MANUFACTURER: GE; P/N: 16013  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : FUSE, MANUFACTURER REFERENCE NUMBER : 16013, MANUFACTURER : GENERAL ELECTRIC, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : GENERAL PURPOSE FUSIBLE,CLASS GG,2, INTERNAL REMARKS : -


Input: I have material name like this  ===  NUT, M8 X P1.0, P/N : 129150-11750, PARTS FOR YANMAR GENSETENGINE MODEL 4TNE106T-GIA  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : NUT, MANUFACTURER REFERENCE NUMBER : 129150-11750, MANUFACTURER : YANMAR, SIZE : M8 X P1.0, MATERIAL : -, EQUIPMENT NAME : GENERATOR ENGINE, ADDITIONAL DETAILS : MODEL:4TNE106T-GIA,PARTS FOR GENSET, INTERNAL REMARKS : -


Input: I have material name like this  ===  SEAT OF ERC BOLTS FOR 8" PN. 443096 FOR SNO-PK-6073 MFR. SVT GMBH WORKS NO. 926/62248,  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAT, MANUFACTURER REFERENCE NUMBER : 443096, MANUFACTURER : SVT, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : BOLTS;;WORKS NO. 926/62248,FOR 8| FOR SNO-PK-6073, INTERNAL REMARKS : -


Input: I have material name like this  ===  ELBOW, 90 DEG, LONG RADIUS, SOCKETWELD, CARBON STEEL, ASTM A105N, CLASS 3000, SIZE 30 INCH  ===  Please inform me parameter below:  TYPE  SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  ANGLE  RADIUS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: ELBOW, PIPE, TYPE : -, SIZE : 30 IN, END CONNECTION : SOCKET WELD, SCHEDULE NUMBER : -, PRESSURE RATING : CLASS 3000, WALL THICKNESS : -, ANGLE : 90 DEGREE, RADIUS : LONG RADIUS, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A105N, COATING/FINISH : -, MANUFACTURING PROCESS : -, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  DAMPERP / N : 92075-1414MODEL : KVF 400 C1, TYPE : ATVS / N : VF 488AF538159 S / N : VF 488AF538159  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : DAMPER, MANUFACTURER REFERENCE NUMBER : 92075-1414, MANUFACTURER : KAWASAKI, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ALL TERRAIN VEHICLE, ADDITIONAL DETAILS : EQUIPMENT MODEL: KVF 400 C1,TYPE : ATV,SERIAL NUMBER: VF 488AF538159, INTERNAL REMARKS : -


Input: I have material name like this  ===  WELDOLET: BONNEY, CS, A105 GR-B, 4 RUN, 4 BRC WELDOLET: BONNEY,FORGET STEEL ASTM A-105, STANDARD WEIGHT SIZE WALL THICKNESS HEADERXBRANCH 4 4 0.237PMI REQUIRED MEC NO: 099191111 HS NO: 730793000  ===  Please inform me parameter below:  TYPE  RUN PIPE SIZE  BRANCH SIZE  PRESSURE CLASS  SCHEDULE NUMBER  MATERIAL  MATERIAL STANDARD  COATING/FINISH  WALL THICKNESS  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: WELDOLET, TYPE : BONNET, RUN PIPE SIZE : 4 IN, BRANCH SIZE : 4 IN, PRESSURE CLASS : -, SCHEDULE NUMBER : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A105 GRADE B, COATING/FINISH : -, WALL THICKNESS : 0.237 IN, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : PMI REQUIRED, INTERNAL REMARKS : MEC NO: 099191111 HS NO: 730793000


Input: I have material name like this  ===  PLUG, SPARK, IGNITION, COPPER NICKEL, 18MM THREAD DIA, 1/2IN THREAD RE ACH, 7/8IN HEXAGONAL SIZE, 3.7IN LG, 3/4IN-20 SHIELDED, FOUR  ===  Please inform me parameter below:  TYPE  SPARK GAP  TEMPERATURE RATING  MATERIAL  INSULATOR TIP  THREAD SIZE  INSERTION LENGTH  TERMINAL TYPE  THERMAL CONDUCTIVITY  MOUNTING TYPE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PLUG, SPARK, TYPE : IGNITION, SPARK GAP : 0.025 GAP, TEMPERATURE RATING : -, MATERIAL : COPPER NICKEL, INSULATOR TIP : -, THREAD SIZE : 18 MM, INSERTION LENGTH : 3.70 IN, TERMINAL TYPE : -, THERMAL CONDUCTIVITY : -, MOUNTING TYPE : -, PART NUMBER : RHM83N, MANUFACTURER : CHAMPION, ADDITIONAL DETAILS : 1/2IN THREAD REACH,7/8IN HEXAGONAL,3/4IN-20 SHIELDED,FOUR, INTERNAL REMARKS : -


Input: I have material name like this  ===  NIPPLE,SWAGE,CONC,1.5INX0.5IN,3000LB,PBE,A105,BLACK,AS PER MHK-COMP-SPE- EP- PVV-0144  ===  Please inform me parameter below:  TYPE/STRUCTURE  SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  LENGTH  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: NIPPLE, PIPE, TYPE/STRUCTURE : SWAGE,CONCENTRIC, SIZE : 1-1/2 IN, END CONNECTION : PBE, SCHEDULE NUMBER : -, PRESSURE RATING : CLASS 3000, WALL THICKNESS : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A105, COATING/FINISH : BLACK VARNISH, LENGTH : 1/2 IN, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : AS PER MHK-COMP-SPE-EP-PVV-0144


Input: I have material name like this  ===  CABLE: POWER AND CONTROL, MC (XHHW), 3/C 8AWG 600V 10 AWG ALUMINIUM SHEATH, CLX TYPE, COPPER CONDUCTOR, 1000 FT/RL ACCEPTABLE BRANDS:OKONITE, CANADA WIRE, PHILIPS, FUJIKURA, MITSUBISHI, ROCKBESTOS, SOUTHWIRE-USA OR PER CPI SPECIFICATIONOKONITE NO./CPI SPEC.NO. 571-31-3190  ===  Please inform me parameter below:  TYPE  CONDUCTOR SIZE  VOLTAGE RATING  LENGTH  CONDUCTOR MATERIAL  JACKET MATERIAL  JACKET COLOR  INSULATION MATERIAL  SHIELDED/UNSHIELDED PAIR  NUMBER OF CONDUCTOR  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: CABLE, POWER, TYPE : XHHW, CONDUCTOR SIZE : 8 AWG, VOLTAGE RATING : 600 V, LENGTH : 1000 FT/ROLL, CONDUCTOR MATERIAL : COPPER, JACKET MATERIAL : -, JACKET COLOR : -, INSULATION MATERIAL : -, SHIELDED/UNSHIELDED PAIR : -, NUMBER OF CONDUCTOR : 3, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : OKONITE, ADDITIONAL DETAILS : CONTROL,MC 10 AWG ALUMINIUM SHEATH,CLX TYPE,SPECIFICATIONOKONITE NO./CPI SPEC.NO. 571-31-3190,CANADA WIRE,PHILIPS,FUJIKURA,MITSUBISHI,ROCKBESTOS,SOUTHWIRE-USA OR PER CPI, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE, SAFETY, TYPE: VSG-3521-H-XX-11-D024 12 WATTS, - VOLTAGE: 24V DC, - AIR WORK PRESSURE: 40 - 170 PSI, - CONN.DIA: 1/2 INCH, - ORIFICE DIA: BODY : BRASS FOR VERSA, SOLENOID VALVE 3 WAY  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  DESIGN PRESSURE RANGE  END TO END DIMENSION  MATERIAL  CONSTRUCTION TYPE  CONFIGURATION  OPERATED TYPE  TRIM MATERIAL  SET PRESSURE  OPERATING PRESSURE  TEMPERATURE RATING  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  SERVICE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, RELIEF, TYPE : SAFETY, NOMINAL SIZE : 1/2 IN, END CONNECTION : -, SCHEDULE NUMBER : -, PRESSURE RATING : -, DESIGN PRESSURE RANGE : -, END TO END DIMENSION : -, MATERIAL : BRASS, CONSTRUCTION TYPE : -, CONFIGURATION : -, OPERATED TYPE : -, TRIM MATERIAL : -, SET PRESSURE : -, OPERATING PRESSURE : 40 TO 170 PSI, TEMPERATURE RATING : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, SERVICE : -, MODEL NUMBER : -, PART NUMBER : VSG-3521-H-XX-11-D024, MANUFACTURER : VERSA, ADDITIONAL DETAILS : 12 WATTS,-VOLTAGE : 24V DC,-AIR -ORIFICE DIA : FOR VERSA,SOLENOID VALVE 3 WAY, INTERNAL REMARKS : -


Input: I have material name like this  ===  RELAY, OVERLOAD; TYPE : RELAY OVERLOAD ; ELECTRICAL RATING : 9 - 13 AMP ; MODEL : LR2-D1316 ; MANUFACTURER NAME : TELEMECANIQUE SCHNEIDER ; ADDITIONAL INFO 1 : PART THERMAL TELEMECANIQUE OVER LOAD  ===  Please inform me parameter below:  TYPE  CURRENT RANGE  CONTACT CONFIGURATION  MOUNTING TYPE  CONTACT RATING  ACTION  TERMINAL TYPE  RESET TYPE  CONTACT MATERIAL  SIZE  ENCLOSURE TYPE  ENCLOSURE RATING  NEMA/IEC SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: RELAY, OVERLOAD, TYPE : THERMAL, CURRENT RANGE : 9 TO 13 A, CONTACT CONFIGURATION : -, MOUNTING TYPE : -, CONTACT RATING : -, ACTION : -, TERMINAL TYPE : -, RESET TYPE : -, CONTACT MATERIAL : -, SIZE : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, NEMA/IEC SIZE : -, PART NUMBER : LR2-D1316, MANUFACTURER : TELEMECANIQUE, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  RELAY: OVERLOAD, SCHNEIDER,LRD04RELAY: OVERLOAD, TESYS, D THERMAL LRD04, 0.4-0.63 A, CLASS 10A, OPS VOLTAGE 690V AC, 0-400 HZ, RATE IMPULSE WITH STANDARD VOLTAGE 6KV, TEMP. COMPENSATION 30 60 DEG C MANUFACTURER: SCHNEIDER MPN. LRD04  ===  Please inform me parameter below:  TYPE  CURRENT RANGE  CONTACT CONFIGURATION  MOUNTING TYPE  CONTACT RATING  ACTION  TERMINAL TYPE  RESET TYPE  CONTACT MATERIAL  SIZE  ENCLOSURE TYPE  ENCLOSURE RATING  NEMA/IEC SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: RELAY, OVERLOAD, TYPE : THERMAL, CURRENT RANGE : 0.4 TO 0.63 A, CONTACT CONFIGURATION : -, MOUNTING TYPE : -, CONTACT RATING : 690 VAC,0-400 HZ,RATE IMPULSE WITH STANDARD VOLTAGE 6KV, ACTION : -, TERMINAL TYPE : -, RESET TYPE : -, CONTACT MATERIAL : -, SIZE : -, ENCLOSURE TYPE : -, ENCLOSURE RATING : -, NEMA/IEC SIZE : -, PART NUMBER : LRD04, MANUFACTURER : SCHNEIDER, ADDITIONAL DETAILS : TESYS,D,CLASS 10A,TEMP. COMPENSATION 30 60 DEG.C, INTERNAL REMARKS : -


Input: I have material name like this  ===  SPRING ASSY, FRONTPARTS FOR :-PICKUP TYPE K10,K20.-PICKUP & SUBURBAN TYPE 10-35.-AMBULANCE TYPE C10.-CARRY ALL TYPE K10.-SEDAN TYPE C10.MANUFACTURER:GM CORP USA=============================  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SPRING ASSEMBLY,FRONT, MANUFACTURER REFERENCE NUMBER : 460354, MANUFACTURER : GENERAL MOTORS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : PICKUP SUBURBAN AMBULANCE AND CARRY ALL, ADDITIONAL DETAILS : EQUIPMENT MODEL:TYPE K10,K20,PICKUP AND SUBURBAN TYPE 10-35.-AMBULANCE TYPE C10.-CARRY ALL TYPE K10.-SEDAN TYPE C10, INTERNAL REMARKS : -


Input: I have material name like this  ===  KIT:SOFTGOODS,VLV,(5) SPACER 320401095 (; MANUFACTURER: CCI VALVES; P/N: 201618-08-SOFT  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SOFTGOODS KIT, MANUFACTURER REFERENCE NUMBER : 201618-08-SOFT, MANUFACTURER : CCI, SIZE : -, MATERIAL : -, EQUIPMENT NAME : VALVE, ADDITIONAL DETAILS : 5 SPACER 320401095, INTERNAL REMARKS : -


Input: I have material name like this  ===  MAIN BEARING SET STD (VRG 220),BEARING, MAIN, KITPARTS FOR : WAUKESHA GAS ENGINEMODEL : VRG-220/330 GAS AND VRD-220/330,220-S/330-S DIESEL.S / N : 398049-398062MFR : WAUKESHA ENGINE DIVISION DRESSERINDUSTRIES INC.-  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : MAIN BEARING SET,STANDARD, MANUFACTURER REFERENCE NUMBER : G918307, MANUFACTURER : WAUKESHA, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINES,GAS, ADDITIONAL DETAILS : EQUIPMENT MODEL:VRG-220/330,VRD-220/330,220-S/330-S,SERIAL NUMBER:398049-398062,(VRG 220), INTERNAL REMARKS : -


Input: I have material name like this  ===  PIPE,LINE,30IN,25.4MM,SMLS,BE,5L_X65,CTE6MM,CWC25MM,12MTR,C/W END PROTECTORS,AS PER MHK-COMP-SPE-EP-PLR-0201,MHK-COMP-SPE-EP-COR-0221,MHK- COMP-SPE-EP-PLR-0410,LONGITUDINAL SEAM PLEASE NOTE : ANY FUTURE EPRS ORDERS WILL NEED TO USE PP2MM TO REPLACETHE CTE6MM (OLD MRP PD=10)  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  LENGTH  END CONNECTION  SCHEDULE NUMBER  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  MANUFACTURING PROCESS  TEMPERATURE RATING  DESIGN STANDARD  DIMENSIONAL STANDARD  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: PIPE, METALLIC, TYPE : -, NOMINAL SIZE : 30 IN, LENGTH : 12 M, END CONNECTION : BEVELLED END, SCHEDULE NUMBER : -, PRESSURE RATING : -, WALL THICKNESS : 25.4 MM, MATERIAL : -, MATERIAL STANDARD : API GRADE X65, COATING/FINISH : -, MANUFACTURING PROCESS : SEAMLESS, TEMPERATURE RATING : -, DESIGN STANDARD : API SPEC 5L, DIMENSIONAL STANDARD : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : CTE 6 MM,CWC 25 MM,COMPLETE WITH END PROTECTORS,AS PER MHK-COMP-SPE-EP-PLR-0201,MHK-COMP-SPE-EP-COR-0221,MHK- COMP-SPE-EP-PLR-0410,PLEASE NOTE:ANY FUTURE EPRS ORDERS WILL NEED TO USE PP 2 MM TO REPLACE THE CTE 6 MM (OLD MRP PD:10), INTERNAL REMARKS : -


Input: I have material name like this  ===  FLANGE: BLIND, FS A-105, RF, ANSI B 16.5, 2, 6.00 OD FLANGE: BLIND, FS A-105, RF, ANSI B 16.5 SIZE OD FLANGE ANSI CLASS ---- --------- ---------- 2 6.00 150 PMI REQUIRED MEC NO: 090144102 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  PRESSURE RATING  MATERIAL  MATERIAL STANDARD  COATING/FINISH  FLANGE FACING  DIMENSIONAL STANDARD  THICKNESS  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FLANGE, PIPE, TYPE : BLIND, NOMINAL SIZE : 2 IN, PRESSURE RATING : CLASS 150, MATERIAL : -, MATERIAL STANDARD : ASTM A105, COATING/FINISH : -, FLANGE FACING : RAISED FACE, DIMENSIONAL STANDARD : -, THICKNESS : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : ANSI B 16.5,6.00 OD PMI REQUIRED, INTERNAL REMARKS : MEC NO: 090144102 HS NO: 000000000


Input: I have material name like this  ===  PART NAME: RING,PACKING, MANUFACTURER REFERENCE NUMBER: 5390009977, MANUFACTURER: AUDCO, MATERIAL: POLYTETRAFLUOROETHYLENE, EQUIPMENT NAME: GATE VALVE, ADDITIONAL DETAILS: TYPE: BRAIDED,FOR 14 IN TRIM 8,V-216B-054-A-744/SPA  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : RING,PACKING, MANUFACTURER REFERENCE NUMBER : 5390009977, MANUFACTURER : AUDCO, SIZE : -, MATERIAL : POLYTETRAFLUOROETHYLENE, EQUIPMENT NAME : GATE VALVE, ADDITIONAL DETAILS : TYPE: BRAIDED,FOR 14 IN TRIM 8,V-216B-054-A-744/SPA, INTERNAL REMARKS : -


Input: I have material name like this  ===  RECEPTACLE,ELEC:MOBILE SKT,PIN,3P,380-41; MANUFACTURER: LEGRAND; P/N: 0562 08  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  CURRENT RATING  NEMA/IEC SIZE  MATERIAL  NUMBER OF POLES  NUMBER OF WIRES  NUMBER OF PHASE  MOUNTING TYPE  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: RECEPTACLE, ELECTRICAL, TYPE : MOBILE SKT, VOLTAGE RATING : 380 TO 415 VAC, CURRENT RATING : -, NEMA/IEC SIZE : -, MATERIAL : -, NUMBER OF POLES : 3, NUMBER OF WIRES : -, NUMBER OF PHASE : -, MOUNTING TYPE : -, SIZE : -, PART NUMBER : 0562 08, MANUFACTURER : LEGRAND, ADDITIONAL DETAILS : PIN,380-41, INTERNAL REMARKS : -


Input: I have material name like this  ===  TRANSDUCER (96 CD)MODEL-S/N: H-25/GT-522/523/524MFR : HITACHI LTD  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : TRANSDUCER,PRESSURE, MANUFACTURER REFERENCE NUMBER : GSPR-004, MANUFACTURER : HITACHI, SIZE : -, MATERIAL : -, EQUIPMENT NAME : GAS TURBINE GENSET, ADDITIONAL DETAILS : SERIAL NUMBER:H-25/GT-522/523/524,96 CD, INTERNAL REMARKS : -


Input: I have material name like this  ===  O'RING,LINDE, 72.14 X 1.8 V80, P/N 000 963 27 13 FOR HYDRAULIC MOTOR LINDE HMF 75-02  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : O-RING, MANUFACTURER REFERENCE NUMBER : 000 963 27 13, MANUFACTURER : LINDE, SIZE : -, MATERIAL : -, EQUIPMENT NAME : MOTOR,HYDRAULIC, ADDITIONAL DETAILS : 72.14 X 1.8 V80, INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: SEAL KIT, MANUFACTURER REFERENCE NUMBER: FOGT10064647-70, MANUFACTURER: FREUDENBERG, EQUIPMENT NAME: ACTUATOR, ADDITIONAL DETAILS: MPR 1500 FRANCE-OPERATOR,CONSIST OF:SEALS,FB46-3A3,V75.4,SEALS,FB34-5A3,V75.3,SEALS,FB43-2A3,V75.3,SEALS,FB32-5A3,V75.1,OIL SEAL. WSL,NBRM.1  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAL KIT, MANUFACTURER REFERENCE NUMBER : FOGT10064647-70, MANUFACTURER : FREUDENBERG, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ACTUATOR, ADDITIONAL DETAILS : MPR 1500 FRANCE-OPERATOR,CONSIST OF:SEALS,FB46-3A3,V75.4,SEALS,FB34-5A3,V75.3,SEALS,FB43-2A3,V75.3,SEALS,FB32-5A3,V75.1,OIL SEAL. WSL,NBRM.1, INTERNAL REMARKS : -


Input: I have material name like this  ===  SIZE: 3 MM,T X 1500 MM,L X1500 MM,W BURASIL UNIVERSAL9544-U GASKET SHEET BRAND: BURGMANN BURGMANN  ===  Please inform me parameter below:  TYPE  SIZE  THICKNESS  MATERIAL  TEMPERATURE RATING  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: GASKET, SHEET, TYPE : PAPER, SIZE : 1500 X 1500 MM, THICKNESS : 3 MM, MATERIAL : -, TEMPERATURE RATING : -, PART NUMBER : -, MANUFACTURER : BURGMANN, ADDITIONAL DETAILS : BURASIL UNIVERSAL9544-U, INTERNAL REMARKS : -


Input: I have material name like this  ===  UPAK PACKING 600 BG (1.1/2" X 8") (10 STICK)PART FOR : HORIZONTAL DUPLEX CRANKCASE PUMPMODEL/TYPE : HDCP-P5 SERIES S.P. 4-44.126SERIAL NUMBER : 31724 TO 31728 ; 32718 TO 32726 ; 36487 TO 36488MANUFACTURE : DAWSON AND DOWNIE  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PACKING, MANUFACTURER REFERENCE NUMBER : -, MANUFACTURER : DAWSON DOWNIE, SIZE : 1-1/2 X 8 IN, MATERIAL : -, EQUIPMENT NAME : HORIZONTAL DUPLEX CRANKCASE PUMP, ADDITIONAL DETAILS : EQUIPMENT MODEL:HDCP-P5 SERIES S.P. 4-44.126,SERIAL NUMBER:31724 TO 31728,600 BG (10 STICK),32718 32726,36487 36488,UPAK, INTERNAL REMARKS : -


Input: I have material name like this  ===  V-BELT, RUBBER, C-310MODEL/TYPE : MULTIPLE (RMA)MANUFACTURE : BANDO  ===  Please inform me parameter below:  TYPE  OUTSIDE DIAMETER  TOP WIDTH  MATERIAL  THICKNESS  NUMBER OF RIB  BELT NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BELT, V, TYPE : MULTIPLE (RMA), OUTSIDE DIAMETER : -, TOP WIDTH : -, MATERIAL : RUBBER, THICKNESS : -, NUMBER OF RIB : -, BELT NUMBER : C310, PART NUMBER : -, MANUFACTURER : BANDO, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  VALVE,BALL,4IN,900LB,RTJ FLANGE ENDS,AS PER DATA SHEET: BAL 2CJ 090B REV.6.  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  END TO END DIMENSION  BODY MATERIAL  BODY MATERIAL STANDARD  CONSTRUCTION TYPE  STYLE  PORT TYPE  TEMPERATURE RATING  TRIM MATERIAL  SEAT MATERIAL  SEAL MATERIAL  PACKING MATERIAL  OPERATED TYPE  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: VALVE, BALL, TYPE : -, NOMINAL SIZE : 4 IN, END CONNECTION : RING TYPE JOINT FLANGE, PRESSURE RATING : CLASS 900, END TO END DIMENSION : -, BODY MATERIAL : CARBON STEEL, BODY MATERIAL STANDARD : ASTM A105 OR ASTM A216 GRADE WCB, CONSTRUCTION TYPE : -, STYLE : -, PORT TYPE : -, TEMPERATURE RATING : -, TRIM MATERIAL : -, SEAT MATERIAL : -, SEAL MATERIAL : -, PACKING MATERIAL : -, OPERATED TYPE : -, MODEL NUMBER : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : -, INTERNAL REMARKS : AS PER DATA SHEET : BAL 2CJ 090B REV.6


Input: I have material name like this  ===  SEAL; MATERIAL : GRAPHITE GTJ ; PART NUMBER : BXH2G0070HQ ; ADDITIONAL INFO 1 : GLAND PLATE FIRE SAFE, PART F/ BALL VALVES, MDL: ; ADDITIONAL INFO 2 : B5/ACTUATOR (TRUNNION SIDE ENTRY) & MDL: ; ADDITIONAL INFO 3 : B5/MANUAL OP. (TRUNNION SIDE ENTRY), MFR: GROVE  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAL, MANUFACTURER REFERENCE NUMBER : BXH2G0070HQ, MANUFACTURER : GROVE, SIZE : -, MATERIAL : GRAPHITE GTJ, EQUIPMENT NAME : BALL VALVE, ADDITIONAL DETAILS : GLAND PLATE FIRE SAFE,B5/ACTUATOR (TRUNNION SIDE ENTRY) AND MDL: ; B5/MANUAL OP. (TRUNNION SIDE ENTRY, INTERNAL REMARKS : -


Input: I have material name like this  ===  PIN, 0.50 INCH X 1.75 INCH FOR MERLA KICK OVER TOOL  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PIN, MANUFACTURER REFERENCE NUMBER : 96 M 11041, MANUFACTURER : MERLA, SIZE : 1/2 X 1-3/4 IN, MATERIAL : -, EQUIPMENT NAME : KICK OVER TOOL, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  CAGE, WHISPER TRIM, ED, FISHER CONTROLS INTL, 2V502433272, CB7CU, 1 5/16 IN, 600LB , STEM MATERIAL:316 STAINLESS STEEL  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CAGE,WHISPER TRIM,ED, MANUFACTURER REFERENCE NUMBER : 2V502433272, MANUFACTURER : FISHER, SIZE : 1-5/16 IN, MATERIAL : STAINLESS STEEL-316, EQUIPMENT NAME : -, ADDITIONAL DETAILS : CB7CU,600LB,STEM, INTERNAL REMARKS : -


Input: I have material name like this  ===  PART NAME: SEAL, MANUFACTURER REFERENCE NUMBER: 600-55-520, MANUFACTURER: ARROW, EQUIPMENT NAME: HYDROW PROD.PACKER, ADDITIONAL DETAILS: 5 IN MODEL HYDROW-I HYDRAULIC SET DOUBLE  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAL, MANUFACTURER REFERENCE NUMBER : 600-55-520, MANUFACTURER : ARROW, SIZE : -, MATERIAL : -, EQUIPMENT NAME : HYDROW PROD.PACKER, ADDITIONAL DETAILS : 5 IN MODEL HYDROW-I HYDRAULIC SET DOUBLE, INTERNAL REMARKS : -


Input: I have material name like this  ===  INSULATOR: PIN TYPE, PLATIC, 15KV FOR 1 DIA PIN INSULATOR: PIN TYPE, PLATIC, 15KV FOR 1 DIA PIN, RELIABLE S-862 MEC NO: 226233303 HS NO: 000000000  ===  Please inform me parameter below:  TYPE  VOLTAGE RATING  IMPULSE WITHSTAND VOLTAGE  FLASHOVER VOLTAGE  CREEPAGE DISTANCE  BIL RATING  TENSILE STRENGTH  NUMBER OF DISC  CONDUCTOR SIZE  MOUNTING  MATERIAL  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: INSULATOR, ELECTRICAL, TYPE : -, VOLTAGE RATING : 1.5 KV, IMPULSE WITHSTAND VOLTAGE : -, FLASHOVER VOLTAGE : -, CREEPAGE DISTANCE : -, BIL RATING : -, TENSILE STRENGTH : -, NUMBER OF DISC : -, CONDUCTOR SIZE : -, MOUNTING : -, MATERIAL : -, SIZE : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : INSULATOR: PIN TYPE,PLATIC,FOR 1 DIA PIN INSULATOR: PIN TYPE,PLATIC,15KV FOR 1 DIA PIN,RELIABLE S-862, INTERNAL REMARKS : MEC NO: 226233303 HS NO: 000000000


Input: I have material name like this  ===  MOUNTING PLATE TYPE : - P/N. : 136083 MODEL : - SIZE : 2 MATERIAL : STEEL APPLICATION : TERMINAL BOX 814, STAHL (GERMANY) - CONTROL STATIONS BRAND : STAHL (GERMANY), NEWMAN E  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : PLATE,MOUNTING, MANUFACTURER REFERENCE NUMBER : 136083, MANUFACTURER : STAHL, SIZE : 2, MATERIAL : -, EQUIPMENT NAME : TERMINAL BOX, ADDITIONAL DETAILS : 814, CONTROL STATIONS,NEWMAN E, INTERNAL REMARKS : -


Input: I have material name like this  ===  FITTING, HOSE, CONNECTOR (50MM X 1M LENGTH), FOR AIR FILTER CHAMBER. FOR NUOVO PIGNONE GAS TURBINE MODEL : LM 2500 + HSPT, TAG.NO: 5-KT-0200 AND 5-KT-0300, SERIAL NUMBER : G 06541 AND G 06542.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : FITTING,HOSE,CONNECTOR, MANUFACTURER REFERENCE NUMBER : IRF4337005, MANUFACTURER : NUOVO PIGNONE, SIZE : 50 MM X LG: 1 M, MATERIAL : -, EQUIPMENT NAME : TURBINES,GAS, ADDITIONAL DETAILS : EQUIPMENT MODEL:LM-2500-HSPT,SERIAL NUMBER:G06541 AND G06542,FOR AIR FILTER CHAMBER,SERIAL NUMBER:G 06541,G 06542, INTERNAL REMARKS : TAG NUMBER:5-KT-0200 AND 5-KT-0300


Input: I have material name like this  ===  SPEED CONTROL UNIT TYPE : 2301A P/N : 9907-014 MODEL : SPEED CONTROL LOW VOLTAGE RATED VOLTAGE : 10-40VDC ACTUATOR CURRENT : 0-200MA ACTING : FORWARD ADDITIONAL INFO : STANDARD SPEED,CONTROL LOW VOLTAGE APPLICATION : DEG/GEG/TEG ENGINE CONTROL BRAND : WOODWARD  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : CONTROL,SPEED, MANUFACTURER REFERENCE NUMBER : 9907-014, MANUFACTURER : WOODWARD, SIZE : -, MATERIAL : -, EQUIPMENT NAME : TURBINES,GAS, ADDITIONAL DETAILS : TYPE:2301A,MODEL:LOW VOLTAGE RATED VOLTAGE:10-40VDC ACTUATOR CURRENT:0-200MA ACTING:FORWARD STANDARD,LOW VOLTAGE APPLICATION:DEG/GEG/TEG ENGINE BRAND, INTERNAL REMARKS : -


Input: I have material name like this  ===  BELT, V; TYPE : L SECTION POLY V-BELT ; MODEL : PL2324/915L-10 ; MANUFACTURER NAME : OPTIBELT ; ADDITIONAL INFO 1 : PITCH: 4.7MM; THICKNESS(B): 7MM; HEIGHT (T): 3.8MM ; ADDITIONAL INFO 2 : OIL & HEAT RESISTANT, CLASICAL SECTION A24 ; ADDITIONAL INFO 3 : FOR GB RADIATOR FAN EDG  ===  Please inform me parameter below:  TYPE  OUTSIDE DIAMETER  TOP WIDTH  MATERIAL  THICKNESS  NUMBER OF RIB  BELT NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BELT, V, TYPE : -, OUTSIDE DIAMETER : -, TOP WIDTH : -, MATERIAL : -, THICKNESS : 7 MM, NUMBER OF RIB : -, BELT NUMBER : A24, PART NUMBER : PL2324/915L-10, MANUFACTURER : OPTIBELT, ADDITIONAL DETAILS : CROSS SECTION L,POLY,PITCH: 4.,HEIGHT (T): 3.8MM,OIL AND HEAT RESISTANT,FOR GB RADIATOR FAN EDG, INTERNAL REMARKS : -


Input: I have material name like this  ===  ADAPTER,FLANGE,DSA,11 IN,10000X5000PSIDOUBLE STUDDED ADAPTER FLANGES WITHSTUDS AND NUTS FOR BOTH FLANGES.MANUFACTURER : CAMERON -USABOTTOM TOPIN SERIES W.P/PSI IN SERIES W.P/PSI== ====== ======= == ====== =======  ===  Please inform me parameter below:  TYPE  NOMINAL SIZE  END CONNECTION  PRESSURE RATING  WALL THICKNESS  MATERIAL  MATERIAL STANDARD  COATING/FINISH  NUMBER OF MOUNTING HOLE/SLOT  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FLANGE, ADAPTER, TYPE : DOUBLE STUDDED ADAPTER, NOMINAL SIZE : 11 IN, END CONNECTION : -, PRESSURE RATING : 10000 X 5000 PSI, WALL THICKNESS : -, MATERIAL : -, MATERIAL STANDARD : -, COATING/FINISH : -, NUMBER OF MOUNTING HOLE/SLOT : -, PART NUMBER : -, MANUFACTURER : CAMERON, ADDITIONAL DETAILS : WITH STUDS AND NUTS FOR BOTH FLANGES. BOTTOM TOPIN SERIES W.P/PSI, INTERNAL REMARKS : -


Input: I have material name like this  ===  BATTERY, SOLAR CELL, 12 VDC, 1658 AH, MODE: NGS6021695HS0FC (A602/1695) MFR. SONNENSCHEIN - ORGA  ===  Please inform me parameter below:  TYPE  BATTERY ELECTROLYTE  VOLTAGE RATING  CAPACITY  SHELF LIFE  TERMINAL TYPE  TEMPERATURE RATING  ELECTROLYTE LEVEL INDICATOR  CASE MATERIAL  OVERALL SIZE  MANUFACTURER  PART NUMBER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BATTERY, WET CELL, TYPE : -, BATTERY ELECTROLYTE : -, VOLTAGE RATING : 12 VDC, CAPACITY : 1658 AH, SHELF LIFE : -, TERMINAL TYPE : -, TEMPERATURE RATING : -, ELECTROLYTE LEVEL INDICATOR : -, CASE MATERIAL : -, OVERALL SIZE : -, MANUFACTURER : ENSCHEIN-ORGA, PART NUMBER : -, ADDITIONAL DETAILS : SOLAR CELL,MODE: NGS6021695HS0FC (A602/1695) MFR. SONN, INTERNAL REMARKS : -


Input: I have material name like this  ===  FUSE:630A,1000VAC,DIN; MANUFACTURER: LOHER; P/N: 43653/02/110  ===  Please inform me parameter below:  TYPE  CURRENT RATING  VOLTAGE RATING  INTERRUPT RATING  CLASS  DIMENSION  MATERIAL  TERMINAL TYPE  RESPONSE TIME  THERMAL CAPACITY  MODEL NUMBER  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: FUSE, TYPE : -, CURRENT RATING : 630 A, VOLTAGE RATING : 1000 VAC, INTERRUPT RATING : -, CLASS : -, DIMENSION : -, MATERIAL : -, TERMINAL TYPE : -, RESPONSE TIME : -, THERMAL CAPACITY : -, MODEL NUMBER : -, PART NUMBER : 43653/02/110, MANUFACTURER : LOHER, ADDITIONAL DETAILS : -, INTERNAL REMARKS : -


Input: I have material name like this  ===  SOCKOLET,CS,10INX1IN,6000LB,SW,A694_F65,AS PER MHK-COMP-SPE-EP- PVV- 0144  ===  Please inform me parameter below:  TYPE  PIPE SIZE  WALL THICKNESS  PRESSURE CLASS  DIMENSIONAL STANDARD  SCHEDULE NUMBER  MATERIAL  MATERIAL STANDARD  COATING/FINISH  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SOCKOLET, TYPE : SOCKET WELD, PIPE SIZE : 10 X 1 IN, WALL THICKNESS : -, PRESSURE CLASS : CLASS 6000, DIMENSIONAL STANDARD : -, SCHEDULE NUMBER : -, MATERIAL : CARBON STEEL, MATERIAL STANDARD : ASTM A694 GRADE F65, COATING/FINISH : -, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : AS PER MHK-COMP-SPE-EP- PVV- 0144, INTERNAL REMARKS : -


Input: I have material name like this  ===  BOLT, MOORE, 167, ALUMINUM, 16 MM, 70 MM LG, W/ NUT  ===  Please inform me parameter below:  DESIGN STANDARD  MATERIAL  BOLT MATERIAL STANDARD  NUT MATERIAL STANDARD  COATING/FINISH  THREAD TYPE  THREAD COARSE PITCH  UNDER HEAD LENGTH  LENGTH  SIZE  PART NUMBER  MANUFACTURER  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: BOLT, HEXAGONAL HEAD, DESIGN STANDARD : -, MATERIAL : ALUMINIUM, BOLT MATERIAL STANDARD : -, NUT MATERIAL STANDARD : -, COATING/FINISH : -, THREAD TYPE : -, THREAD COARSE PITCH : -, UNDER HEAD LENGTH : -, LENGTH : 70 MM, SIZE : 16 MM, PART NUMBER : -, MANUFACTURER : -, ADDITIONAL DETAILS : MOORE,167,W/NUT, INTERNAL REMARKS : -


Input: I have material name like this  ===  SPRING, EXHAUST VALVE,(DDE COACH), GROUP 1,18340, PART NO. FP 5148491;PARTS FOR : DETROIT DIESEL ENGINE, TYPE : 6V92 ,8V92 , 12V92 AND 16V92,IN LINE, MFCR : GENERAL MOTORS CORP. DETROIT DIESEL ENGINE DIV. DETROIT,MICHIGAN - USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SPRING, MANUFACTURER REFERENCE NUMBER : FP 5148491, MANUFACTURER : GENERAL MOTORS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : ENGINE, ADDITIONAL DETAILS : PARTS FOR EXHAUST VALVE,(DDE COACH)GROUP 1,18340,TYPE:6V92,8V92,12V92 AND 16V92,IN LINE, INTERNAL REMARKS : -


Input: I have material name like this  ===  KIT: REPAIR, VITON, SZR ZA.402250, DURA NPN DURA: NPN REPAIR KIT, VITON, FOR SEAL SIZE : 2.125 E45EF/VVV, DRAW.# 2B-41037R4, SULZER ZA.40-2250 MEC NO: 691201085 HS NO: 000000000  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : REPAIR KIT, MANUFACTURER REFERENCE NUMBER : ZA.40-2250, MANUFACTURER : SULZER, SIZE : 2.125, MATERIAL : VITON, EQUIPMENT NAME : -, ADDITIONAL DETAILS : DRAWING NUMBER:2B-41037R4,SIZE:2.125,SZR ZA.402250 DURA NPN DURA:NPN FOR SEAL:E45EF/VVV, INTERNAL REMARKS : MEC NO:691201085 HS NO:000000000


Input: I have material name like this  ===  SEAL RING, P/N. H01-89143-00, PART FOR PAKER-CASING, MODEL A2/A3 LOK-SETRETRIEVABLE, PRODUCT NO. H64612, PAKER SIZE 51B, CASING OD 9.5 8",WEIGHT 29.3#-36#, MFCR : BAKER OIL TOOLS, USA.  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : RING,SEAL, MANUFACTURER REFERENCE NUMBER : H01-89143-00, MANUFACTURER : BAKER OIL TOOLS, SIZE : -, MATERIAL : -, EQUIPMENT NAME : -, ADDITIONAL DETAILS : MODEL:A2/A3-LOK-SETRETRIEVABLE,SIZE/DIMENSION: 51B,CASING OD 9.5 8 IN,PART FOR PAKER,PRODUCT NO.H64612,PAKER,WEIGHT 29.3-36, INTERNAL REMARKS : -


Input: I have material name like this  ===  SEAL, LOWER, SUNDYNE CORP, SE04AD24RZ1TA1C, CARBON METAL FILLED, CRANE 8220, 7071, CARBON METAL FILLED, W/ RETAINER MATERIAL 316SS SHEET, PLATE, STRIP/ ASTM A420  ===  Please inform me parameter below:  PART NAME  MANUFACTURER REFERENCE NUMBER  MANUFACTURER  SIZE  MATERIAL  EQUIPMENT NAME  ADDITIONAL DETAILS  INTERNAL REMARKS

Output: SPARE PARTS, PART NAME : SEAL,LOWER, MANUFACTURER REFERENCE NUMBER : SE04AD24RZ1TA1C, MANUFACTURER : SUNDYNE, SIZE : -, MATERIAL : CARBON METAL FILLED,RETAINER: STAINLESS STEEL-316,SHEET,PLATE,STRIP: ASTM A420, EQUIPMENT NAME : CRANE, ADDITIONAL DETAILS : PART NUMBER:82207071, INTERNAL REMARKS : -